diff --git a/.agents b/.agents new file mode 120000 index 0000000000..c8161850a4 --- /dev/null +++ b/.agents @@ -0,0 +1 @@ +.claude \ No newline at end of file diff --git a/.claude/skills/orca-profiles/SKILL.md b/.claude/skills/orca-profiles/SKILL.md index 259564e063..40ab8c9927 100644 --- a/.claude/skills/orca-profiles/SKILL.md +++ b/.claude/skills/orca-profiles/SKILL.md @@ -1,75 +1,127 @@ --- name: orca-profiles -description: Use when creating, modifying, reviewing or debugging OrcaSlicer FFF system profiles under resources/profiles, including printer/vendor/nozzle/material additions, bundle indexes and versions, preset renames, setting_id and filament_id. Also use for missing presets or vendors, ignored profile settings, ambiguous AMS filament matches, and failures from orca_profile_tool.py, check_profile.sh/.bat, OrcaSlicer_profile_validator or the Check profiles CI job. +description: Use when creating, modifying, reviewing or debugging OrcaSlicer FFF system profiles under resources/profiles, including printer/vendor/nozzle/material additions, bundle indexes and versions, preset renames, setting_id and filament_id, and moving settings that sibling presets repeat onto shared bases after fix-variant or while drafting. Also use for missing presets or vendors, ignored profile settings, ambiguous AMS filament matches, and failures from orca_profile_tool.py, check_profile.sh/.bat, OrcaSlicer_profile_validator or the Check profiles CI job. --- # OrcaSlicer system profiles -A bundle is `resources/profiles/.json` plus `/`. The vendor id is the -filename stem, not the index's display `name`. The index is the loader's only entry point: -unindexed presets never load. `OrcaFilamentLibrary` is the shared filament bundle; -`blacklist.json` is data, not a bundle. +This skill describes how OrcaSlicer system profiles are drafted and shaped: the rules, equations and +patterns a profile follows. Use it to draft new profiles, modify existing ones, fix profile issues and +review profile changes. -## Choose the reference for the task +A bundle is the index `resources/profiles/.json` plus the folder `/`. The vendor id is +the filename stem (`BBL`), not the index's display `name` (`Bambulab`). The index is the loader's only +entry point: an unindexed preset never loads. `OrcaFilamentLibrary` is the shared filament bundle, +loaded first; `blacklist.json` is data, not a bundle. -Read the relevant reference before editing; load others only when the task crosses those areas. -Paths below are relative to this skill. Commands run from the repository root. +## References + +Read the reference for the task before editing; load others only when the task crosses into them. +Paths below are relative to this skill. Commands run from the repository root; on Windows use `py -3` +for `python3`. | Task | Read | | --- | --- | -| Add or tune a filament, brand or material; fix compatibility / alias shadowing | [filament-profiles.md](references/filament-profiles.md) | -| Add a printer or nozzle; change models, variants, assets or extruder vectors | [machine-profiles.md](references/machine-profiles.md) | +| Add or tune a filament, brand or material; fix compatibility, alias shadowing or overlapping coverage | [filament-profiles.md](references/filament-profiles.md) | +| Add a printer or nozzle; change models, variants, assets or per-extruder vectors | [machine-profiles.md](references/machine-profiles.md) | +| Add or tune extruder variants (`extruder_type` Direct Drive / Bowden × nozzle volume type Standard / High Flow / TPU High Flow / E3D High Flow / Extra High Flow variants) on a printer, process or filament | [extruder-variants.md](references/extruder-variants.md) | | Add a quality tier or tune a process | [process-profiles.md](references/process-profiles.md) | -| Create a vendor bundle; diagnose loading or inheritance; migrate preset names | [vendor-bundle.md](references/vendor-bundle.md) | -| Name a preset; check what a name must equal | [naming.md](references/naming.md) | +| Draft several presets, or clean up after `fix-variant`: which base each shared value belongs on, when a new base pays off, proving nothing loads differently | [shared-bases.md](references/shared-bases.md) | +| Name a preset; check what a name must equal; base names, uniqueness, filenames | [naming.md](references/naming.md) | +| Create a vendor bundle; index, `version`, `inherits`, `include`; migrate preset names; diagnose why a bundle fails to load | [vendor-bundle.md](references/vendor-bundle.md) | | Change ids; diagnose AMS identity | [ids.md](references/ids.md), then `docs/HLSD/filament_id.md` for identity changes | -| Review a profile diff | [review-checklist.md](references/review-checklist.md) | | Run checks, interpret failures, test another tree or verify in the app | [validation.md](references/validation.md) | +| Review a profile diff | [review-checklist.md](references/review-checklist.md) | -## Golden rules +## Rules -1. **Bump every changed bundle's `version`**, including `OrcaFilamentLibrary.json` when affected. - Increment the last component; carry `.99` into the third component (`02.04.00.99` → - `02.04.01.00`). The updater requires a strictly newer version. CI does not check this. -2. **Register every preset, bases included, parents before children.** `update-index` generates - the four `*_list` arrays; `check` requires its output. Index names must equal file `name` fields. -3. **Generate ids; never invent or copy them.** Keep existing ids during ordinary tuning. New - presets normally omit them until `generate-id`; bases must have no `setting_id`. - BBL's authoritative `setting_id` and a wrongly inherited `filament_id` need the explicit - handling in [ids.md](references/ids.md). -4. **Load failures can discard a whole vendor bundle.** Broken `inherits`, missing indexed files, - duplicate names, invalid model/variant references and unresolved filament ids affect more than - the edited preset. Inheritance stays within a bundle, except filaments may inherit the library. -5. **Preserve shipped selectable names.** Renaming, deleting or changing `instantiation` from - `"true"` to `"false"` needs `renamed_from` on a selectable successor. It is a `;`-separated string; - update in-tree references too. See [migration rules](references/vendor-bundle.md#renamed_from). -6. **Compatibility uses exact printer variant names.** Every instantiated non-library filament - needs a non-empty `compatible_printers` in its own file. Library fallbacks may omit it; - library printer-specific tunes use a non-empty list. One variant may be claimed by only one - profile per filament product (`filament_id`); an overlap is resolved by moving the variant to the - most specific preset, which is preferred over deleting a profile. See - [one variant, one profile](references/filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product). -7. **Preset values are strings or arrays of strings.** Use `"instantiation": "false"`, not `false`. - Model `nozzle_diameter` is a `;`-separated string; machine `nozzle_diameter` is an array. - Wrong types can abort loading; see [failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius). -8. **Verify setting keys against the code.** Unknown keys are silently discarded. Check - `PrintConfig.cpp` definitions and `PrintConfigDef::handle_legacy`; neighbours can contain dead - keys. `normalize` removes known obsolete keys, but does not detect arbitrary misspellings. -9. **Run the full profile checks before reporting completion.** A vendor-scoped pass is only a - development loop. Review also covers version bumps, assets, non-default processes and hardware - tuning that CI cannot establish. +1. **Bump the `version` of every bundle you change**, `OrcaFilamentLibrary.json` included when affected. + Increment the last component and carry `.99` into the third (`02.04.00.99` → `02.04.01.00`). The + updater installs only a strictly newer version, and CI does not check the bump. +2. **Register every preset, bases included, parents before children.** `update-index` writes the four + `*_list` arrays from the files on disk; `check` fails unless the index equals its output. Each index + entry's `name` must equal the file's `name`. +3. **Generate ids; never invent or copy them.** Keep existing ids during ordinary tuning. New presets + normally omit them until `generate-id`; bases carry no `setting_id`. BBL's own `setting_id`s and a wrongly + inherited `filament_id` need the explicit handling in [ids.md](references/ids.md). +4. **A name is an identity; preserve shipped selectable names.** Every reference (`inherits`, + `compatible_printers`, `default_*`, `printer_model`) is the exact, case-sensitive `name`. Renaming or + deleting a shipped selectable preset, or flipping its `instantiation` from `"true"` to `"false"`, + needs `renamed_from` (a `;`-separated string) on a selectable successor + ([migration rules](references/vendor-bundle.md#renamed_from)); update in-tree references too. +5. **Values are strings or arrays of strings.** `"instantiation": "false"`, never `false`. A + `machine_model`'s `nozzle_diameter` is a `;`-separated string; a `machine`'s is an array. Custom + G-code is one string. Wrong types can abort loading of the bundle or of every vendor + ([failure scopes](references/vendor-bundle.md#failure-scopes)). +6. **Unknown keys are dropped silently.** Confirm every new key exists in + `src/libslic3r/PrintConfig.cpp`; a key a neighbouring file writes is no evidence it exists. `check` rejects, + and `normalize` removes, known obsolete keys, but neither detects an arbitrary misspelling. A key + missing from the definitions may be a legacy name the loader still renames + (`tool_change_gcode` → `change_filament_gcode`) or whose value it rewrites (`DirectDrive` → + `Direct Drive`); check `PrintConfigDef::handle_legacy` before removing one, and write the current name + in new edits. +7. **Write overrides only.** Inherit the bundle's bases and restate just what differs; follow the + bundle's existing layering and style, except that a new filament prefers the library's bases. A + value that every preset of a group shares goes on the group's base + ([shared bases](references/shared-bases.md)). +8. **One load error can discard a whole vendor bundle**: an unresolved `inherits`, a missing indexed + file, two selectable presets with one name, an unknown `printer_model` or `printer_variant`, a + filament with no resolvable `filament_id`, `nil` in a non-nullable key. `inherits` and `include` + resolve only inside the bundle, except that filaments may inherit from OrcaFilamentLibrary. +9. **Filament compatibility names exact printer variants.** Every instantiated filament outside the + library writes a non-empty `compatible_printers` in its own file. Library fallbacks may omit it; + library printer-specific tunes use a non-empty list. One variant may be claimed by only one preset + per filament product (`filament_id`); an overlap is resolved by moving the variant to the most + specific preset, which is preferred over deleting a preset + ([one variant, one profile](references/filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)). +10. **One all-printer preset per product; colour is a runtime property, never a preset.** Never ship + presets that differ only by colour. CI accepts them, so this is a review call + ([colour](references/filament-profiles.md#colour-is-a-runtime-property)). +11. **Write a variant key at full width or not at all.** A key in the four variant sets holds exactly + `N` values in the selectable preset that writes it, `N = S × k` in the + [sizing equation](references/extruder-variants.md#sizing-equation): one per variant, a (normal, + silent) pair per variant for the `machine_max_*` limits; one value is not "the same for every + variant". Profiles must be correct as written: `check` judges each selectable preset by the + equation, never by what the loader pads or cuts, and `check --strict` also holds what a preset + inherits to its own width, as BBL writes it. A base is never judged on its own: its array widths + count, under `--strict`, where they reach a preset, while the id and layout rules judge the + composed preset, inherited values included, without it. Declare the variant layout on a + multi-extruder printer whose extruders need different values + ([widths](references/extruder-variants.md#widths)). +12. **Run the full checks before reporting completion.** A `--vendor` run is only a development loop. + Review also covers version bumps, assets, non-default processes and hardware tuning, which CI cannot + establish. + +## Names + +| Type | Shape | What the loader uses | +| --- | --- | --- | +| `machine_model` | `` (`Bambu Lab X1 Carbon`) | the exact string, named by each variant's `printer_model`; also the `_cover.png` stem | +| `machine` | ` nozzle` | the exact string, named by `compatible_printers`; `printer_variant` holds the nozzle token (`0.4`, [rules](references/machine-profiles.md#printer_model-and-printer_variant)) | +| `process` | `mm @` | the exact string when referenced or selected; `@` is a label, compatibility comes from the preset's list or condition | +| `filament` | ` @` | text before the first `@` is the alias (shadowing, `filament_id`); the rest is a label, with reserved targets `@base` and `@System` | + +The shapes are convention; `check` enforces only uniqueness. Per-type conventions, base names and +filename rules are in [naming.md](references/naming.md). ## Creating or modifying a profile -1. **Inspect the diff and neighbouring presets.** Read their `name`, parent chain and children; - edits to a base or a leaf with descendants propagate. Match the bundle's structure and write +1. **Inspect the diff and the neighbouring presets.** Read their `name`, parent chain and children: + edits to a base, or to a leaf that others inherit, propagate. Match the bundle's structure and write only overrides. New files use tab indentation, LF and a trailing newline; preserve unrelated - formatting in existing files. Match filename case exactly and use cross-platform names. -2. **Author explicit metadata.** Set `type` yourself, especially for `machine` vs `machine_model`. - Use `"from": "system"` and string `instantiation` on config presets. Omit ids on new presets - unless [ids.md](references/ids.md) requires special handling; retain them on existing ones. - Complete compatibility, defaults, assets and any rename migration using the task reference. -3. **Bump the version**, then run the authoring commands in order for each affected bundle: + formatting in existing files. Match filename case exactly and use + [cross-platform names](references/naming.md#filenames-and-paths). +2. **Author explicit metadata.** Set `type` yourself (`machine` vs `machine_model` especially), and use + `"from": "system"` and a string `instantiation` on config presets. Omit ids on new presets unless + [ids.md](references/ids.md) requires special handling; retain them on existing ones. Complete + compatibility, defaults, assets and any rename migration using the task reference. +3. **Put shared values on shared bases** when drafting several presets, and after `fix-variant`, which + widens an array in every preset that writes it and moves nothing. Each value goes on the base of the + level that determines it, a new base only where it pays for itself, and a restructure must leave + every selectable preset loading what it loaded: `snapshot` before the edit, `compare` after it + ([shared-bases.md](references/shared-bases.md)). +4. **Bump the version**, then run the authoring commands in order for each affected bundle, reading + every diff and resolving every error before moving on: ```bash python3 scripts/orca_profile_tool.py normalize --vendor "" @@ -78,45 +130,59 @@ Paths below are relative to this skill. Commands run from the repository root. python3 scripts/orca_profile_tool.py check ``` - Writing commands support `--dry-run`. Inspect their diffs: `normalize` changes content and can - reformat entire files. Stop and resolve command errors before proceeding. - - **Do not use `trim` in this workflow:** it can delete newly authored, unindexed profiles. - Do not use `normalize --force` for routine edits. -4. **Validate:** + Writing commands accept `--dry-run`. `normalize` changes content and can reformat entire files; + rerun `update-index` after any change to `inherits` or `include`, since it orders by them. + **Do not use `trim` in this workflow:** it deletes unindexed files, including one you just added. Do + not use `normalize --force` for routine edits. An error in a bundle you did not touch predates your + change: confirm it on a clean checkout and report it rather than fixing it in the same change. +5. **Validate:** ```bash ./scripts/check_profile.sh --vendor "" # development loop ./scripts/check_profile.sh # full tree before the PR ``` - On Windows use `py -3` instead of `python3`, and `scripts\check_profile.bat -Vendor ""` - / `scripts\check_profile.bat`. Logs land in a per-user cache dir (see - [validation.md](references/validation.md)). - Id checks remain tree-wide under `--vendor`; filament-only bundles skip the default slice check. - See [validation.md](references/validation.md) for flags, coverage and error remedies. -5. **Verify the changed behavior.** Slice newly added non-default processes explicitly, and - [test in the app](references/validation.md#testing-in-the-app) for selection or UI behavior. - Report checks actually run, failures/skips and any hardware tuning still unverified. + On Windows use `scripts\check_profile.bat -Vendor ""` / `scripts\check_profile.bat`. Logs + land in a per-user cache dir ([validation.md](references/validation.md)). Id checks stay tree-wide + under `--vendor`, and filament-only bundles skip the default slice check. Under `--vendor` read only + `profile_tool` and `validate_slice`: the other three checks fail on library presets that name other + vendors' printers ([why](references/validation.md#the-five-checks)). +6. **Verify the changed behaviour.** Slice newly added non-default processes and filaments + [explicitly](references/validation.md#checking-a-copy-of-the-tree), and + [test in the app](references/validation.md#testing-in-the-app) for selection or UI behaviour. Report + the checks actually run, their failures and skips, and any hardware tuning still unverified. -## Symptom → first reference +## Symptom → first look | Symptom | Start here | | --- | --- | -| A vendor disappears | Loader log / `validate_system`; [bundle failure scopes](references/vendor-bundle.md#failure-modes-ranked-by-blast-radius) | -| A setting has no effect | Key spelling/type, `handle_legacy`, or a config key placed on a `machine_model` | -| A preset exists but is not selectable | Index registration, `instantiation`, installation and compatibility | -| A filament is missing, duplicated, or matches the wrong spool | [Compatibility and alias shadowing](references/filament-profiles.md#compatible_printers); [ids](references/ids.md) | -| A bed temperature is ignored | [Plate-specific temperature keys](references/filament-profiles.md#bed-temperature-is-twelve-keys-not-one) | -| A change is absent from the running app | Version bump and [installed profile location](references/validation.md#testing-in-the-app) | -| A check fails | [Error → remedy](references/validation.md#error--remedy) | +| A vendor disappears | the app's log or the `validate_system` log; [failure scopes](references/vendor-bundle.md#failure-scopes) | +| A setting has no effect | key spelling or a legacy name (`PrintConfigDef::handle_legacy`), value type, or a config key placed on a `machine_model` | +| A preset exists but is not selectable | index registration, `instantiation`, whether it is installed (chosen in the setup wizard, or listed in the model's `default_materials`), compatibility | +| A filament is missing, duplicated, or matches the wrong spool | [compatibility and alias shadowing](references/filament-profiles.md#compatible_printers), [ids](references/ids.md) | +| Presets differ only by colour, or an all-printer library preset lacks `@System` | [colour is a runtime property](references/filament-profiles.md#colour-is-a-runtime-property) | +| High Flow (or a second extruder) slices with Standard (or extruder 1) values; a variant switch is missing; a variant's tuned values never arrive | [extruder variants](references/extruder-variants.md#variant-strings), [widths](references/extruder-variants.md#widths), [variant names](references/validation.md#variant-names) | +| Values land on the wrong extruder or mode after a variant was added | [inserting a variant](references/extruder-variants.md#adding-a-variant-inserts-its-values-at-its-variant-index), [padding and composition](references/extruder-variants.md#padding-truncation-and-composition) | +| A resolved value matches neither the file nor its `inherits` parent; an array is not the width the file wrote, or a child got only a base's first value | [composition order and `include`](references/vendor-bundle.md#inherits-and-include) | +| A bed temperature is ignored | [the twelve plate keys](references/filament-profiles.md#bed-temperature-is-twelve-keys-not-one) | +| A change is absent from the running app | version bump and [installed profile location](references/validation.md#testing-in-the-app) | +| A check fails | [error → remedy](references/validation.md#error--remedy) | ## Source of truth -When guidance and behavior disagree, inspect the current checkout: -`scripts/orca_profile_tool.py` for tooling and flags; `src/libslic3r/Preset*.cpp` for loading and -compatibility; `src/libslic3r/PrintConfig.cpp` for setting types and legacy handling; -`src/dev-utils/OrcaSlicer_profile_validator.cpp` and `.github/workflows/check_profiles.yml` for -validation coverage. `docs/HLSD/filament_id.md` defines filament identity. The -[profile development guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/how_to_create_profiles.md) +When this skill and the checkout disagree, the checkout wins: `scripts/orca_profile_tool.py` for the +tool and its flags; `src/libslic3r/Preset*.cpp` for loading and compatibility; +`src/libslic3r/PrintConfig.cpp` for keys, types, nullable options, the variant key sets and legacy +handling; `src/dev-utils/OrcaSlicer_profile_validator.cpp` and `.github/workflows/check_profiles.yml` +for validation coverage; `docs/HLSD/filament_id.md` for filament identity. The wiki's +[profile guide](https://github.com/OrcaSlicer/OrcaSlicer_WIKI/blob/main/developer_reference/how_to_create_profiles.md) is a tutorial; confirm loader and CLI details against these sources. + +## Editing this skill + +The skill describes what a profile must be, not what the shipped tree currently is. State rules, +equations, patterns and profile shapes; never inventories of shipped defects, counts, dated +measurements or lists of which vendors do what. Test each sentence: if editing the profiles alone, +with the engine and tool unchanged, could make it false, state the rule behind it or give a generic +example instead. Example files named as models to copy, and commit hashes cited as the reason for a +rule, are fine. diff --git a/.claude/skills/orca-profiles/references/extruder-variants.md b/.claude/skills/orca-profiles/references/extruder-variants.md new file mode 100644 index 0000000000..322d79d56f --- /dev/null +++ b/.claude/skills/orca-profiles/references/extruder-variants.md @@ -0,0 +1,548 @@ +# Extruder variants + +Use this when a printer's hotend or extruder can be in more than one hardware configuration that +needs different settings: a Standard and a High Flow nozzle, a TPU High Flow, E3D High Flow or Extra High Flow nozzle, or +a Direct Drive and a Bowden extruder on one machine. Variants let one printer, process and filament preset carry a +separate value per configuration; the user picks the configuration in the sidebar, and slicing uses +the matching values. They are not for nozzle **diameter**: that stays one `machine` preset per +`printer_variant`. + +## Variant strings + +- A **variant string** is `" "`: the extruder's `extruder_type` + value, a space, and its nozzle volume type (the project's `nozzle_volume_type`, seeded by the + printer preset's `default_nozzle_volume_type`), e.g. `"Direct Drive High Flow"`. +- A **variant** is one entry of a preset's variant list, named by its variant string (plus an extruder + id for printer and process lists). A variant-aware key holds **one value per variant** (a + (normal, silent) pair for the `machine_max_*` limits), and each preset declares its variants in + that list. Slicing picks, for each extruder, the variant whose + variant string equals the current `extruder_type` + nozzle volume type. +- Matching is an **exact string compare** of the whole string (plus the extruder id for printer and + process lists) against the preset's own resolved list, in any order. With no match the **first + variant** is used, silently: variant index 0 for printer and process keys (extruder 1's first + variant, whichever extruder asks), the filament's own first variant for filament keys. Printer and + process keys are matched only on a printer with several extruders or whose + `extruder_variant_list` offers several variant strings (`support_different_extruders`); on any + other printer their variant index 0 is read whatever it names. Nothing rejects a profile for a + variant mismatch; mistakes surface only as wrong values in the G-code. +- Variant index and array length follow [Widths](#widths). + +The complete enum is `s_keys_map_ExtruderType` and `s_keys_map_NozzleVolumeType` in +`src/libslic3r/PrintConfig.cpp` (`grep -A5 s_keys_map_NozzleVolumeType` there to confirm): + +| Part | Values | +| --- | --- | +| Extruder type | `Direct Drive`, `Bowden` | +| Nozzle volume type | `Standard`, `High Flow`, `TPU High Flow`, `E3D High Flow`, `Extra High Flow` (`Hybrid` exists but is runtime-only) | + +So the ten legal variant strings are the two extruder types × the five writable nozzle volume types, +and this table is the whole test of legality: a string's presence in a shipped profile is no evidence +for it. `Hybrid` (an extruder with several sub-nozzles) is never a variant: a filament on it reads the +variant of its own nozzle volume type from the project's `filament_volume_map`, printer and process +keys get one variant per nozzle volume type the extruder holds (`extruder_nozzle_stats`), and any +other lookup reads `Standard`. Never write it in a variant string. The same per-filament and +per-type reading applies on any extruder once `extruder_nozzle_stats` lists more nozzle volume +types than there are extruders. + +Every other string (a nozzle volume type name from another slicer, a typo, a variant copied from a +shipped profile) is a **dead variant**: nothing selects it, and since lookup is by string it does not +shift the variants beside it; it still counts toward the variant length when arrays are sized. +`orca_profile_tool.py check` reports it as an error in every bundle, BBL included +([variant names](validation.md#variant-names)). Legacy names are errors too: in the four variant +lists, `default_nozzle_volume_type` and `nozzle_volume_type`, the loader still rewrites `Normal` → +`Standard` and `Big Traffic` → `High Flow`, so a ported `Direct Drive Normal` variant would load, but +`check` rejects the spelling and names the enum name to write. `DirectDrive` is rewritten only in +`extruder_type`, so `DirectDrive Standard` in a variant list is dead. Write the enum names; +`normalize` does not convert them. + +### A nozzle the enum does not name + +The nozzle volume types are fixed by the engine, and a profile cannot add one. A nozzle the table does +not name needs the type added in code first, which is outside profile work; until then any string +for it is a dead variant. Once the engine has the type, its variant string is the enum name after +the extruder type, e.g. `"Direct Drive "`, and `check` accepts it with no tool change, since it +reads the enum from `PrintConfig.cpp`. Existing arrays are unaffected +([slice time](#slice-time-and-existing-users)). + +## When to use variants + +| Hardware | Do | +| --- | --- | +| One extruder, one nozzle type | Nothing. Without a variant list the printer has one variant ([variant length](#widths)) and no printer-key lookup takes place; a filament with several variants still gets the one for the printer's variant string. | +| Bowden-only printer | Nothing either. A list-less printer matches no string, so every printer-key lookup reads variant index 0 whether that variant is called `"Bowden Standard"` or `"Direct Drive Standard"`; naming it is cosmetic while it is the printer's only variant. A multi-extruder Bowden printer that declares the layout writes `"Bowden Standard"` variants: `"Direct Drive Standard"` entries match none of its extruders, so every extruder reads variant index 0 (and `check` reports them under [Printer rule 3](#printer-machine)). A filament with a `"Bowden Standard"` variant does get that variant there. | +| Nozzle types the user swaps (Standard / High Flow / TPU High Flow / E3D High Flow / Extra High Flow) | The printer lists them as variants; tune the keys that really differ per nozzle volume type. | +| Extruders of different types on one machine | One `extruder_type` per extruder, each extruder listing its own variants. | +| Several extruders that need different values in a variant key (retraction, z-hop, `nozzle_volume`, the `machine_max_*` limits) | Declare the layout even with a single nozzle volume type: `extruder_variant_list` with one `" Standard"` per extruder, and the flattened pair. Without it the arrays still hold one value per extruder ([variant length](#widths)), but the loader keeps only extruder 1's value of a list-less printer's arrays, so every extruder prints with it. | + +A preset without variant keys keeps working on a variant printer: its single variant is applied to +every extruder. So adding variants to a printer does not break existing processes or library +filaments; it only makes per-variant tuning possible. + +## Printer (`machine`) + +```json +"extruder_type": ["Direct Drive", "Direct Drive"], +"extruder_variant_list": ["Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive TPU High Flow"], +"printer_extruder_id": ["1", "1", "2", "2", "2"], +"printer_extruder_variant": ["Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive Standard", "Direct Drive High Flow", "Direct Drive TPU High Flow"], +"default_nozzle_volume_type": ["Standard", "Standard"] +``` + +Rules: + +1. `extruder_variant_list` has **one entry per extruder**; each entry is the `,`-joined variants that + extruder supports. It is the per-extruder menu the sidebar offers. It is in no + [variant set](#the-four-key-sets), so the variant-length resize leaves it alone. Extruder 1's + first variant, variant index 0 of the flattened pair, is the fallback of every extruder whose + variant is missing when the arrays are collapsed for slicing + ([slice time](#slice-time-and-existing-users)); it is not necessarily the configuration the user + sees, which is `default_nozzle_volume_type` (rule 4). +2. `printer_extruder_variant` is that list **flattened** extruder-major, one entry per variant, and + `printer_extruder_id` gives each entry its 1-based extruder. These two size and address every + variant. Write all three keys and keep them in agreement. At load with + `single_extruder_multi_material` off, and in the app when the printer tab loads a printer with a + different number of extruders, the pair is rebuilt from `extruder_variant_list` (one + `Direct Drive Standard` per extruder when the list is absent) and the variant arrays are resized to + the rebuilt pair, padded with their first value or cut. The resize skips the `machine_max_*` limits + and `hotend_heating_rate` / `hotend_cooling_rate`: they keep their width, and an extruder beyond it + reads their first value, so extruder 2 and up of a list-less printer take extruder 1's normal limit + as their silent one too. With the three in agreement that changes nothing; a pair written without + the list is replaced. A listed variant the pair lacks is a menu choice that reads variant index 0. + - The pair without `extruder_variant_list` slices, but the sidebar offers no variant switch and + the app cannot add variants to a list-less process: nothing is lost while every extruder + has exactly one variant, and every further variant is unreachable. + - A missing or one-value `printer_extruder_id` is extruder 1 at every index + ([the id trap](#padding-truncation-and-composition)) unless the load-time rebuild above + replaces the pair (`single_extruder_multi_material` off). + - `check` reports against this rule ([variant arrays](validation.md#variant-arrays)). Errors: a + pair that is not the flattening, an id array that does not give each entry its extruder, a list + of more than one variant without the pair, and a pair without the list that puts several variants + on one extruder. A pair without the list and one variant per extruder is a warning where the + load-time rebuild would replace it (`single_extruder_multi_material` off, and a pair other than + one `Direct Drive Standard` per extruder), and passes otherwise. +3. Every variant string in an entry must start with that extruder's `extruder_type`. +4. `default_nozzle_volume_type` has one value per extruder and must name a nozzle volume type that + extruder's variants list; it seeds the sidebar. The live choice is `nozzle_volume_type` in the + project config, never a preset key. +5. Size every array by the set its key belongs to (the three sets are listed in full in + [The four key sets](#the-four-key-sets); the lengths are worked through in the + [sizing equation](#sizing-equation)): exactly the length below in each selectable preset that + writes it, or leave the key out and the preset takes what reaches it, the default or its base's + array. One value is no + shorthand for "the same for every variant"; write the value for every variant: + +| Set | Length | Keys | +| --- | --- | --- | +| `printer_extruder_options` | extruders (`E`) | the 8 per-extruder keys outside the variant scheme (`extruder_type`, `nozzle_diameter`, `default_nozzle_volume_type`, …) | +| `printer_options_with_variant_1` | variant length (`S`) | the full list below; not guessable from names | +| `printer_options_with_variant_2` | 2 × variant length | the 16 `machine_max_*` limits, at [stride 2](#widths): a (normal, silent) pair per variant | + +Put the variant layout on the shared base of all printers that share the hardware, and let the +nozzle-diameter siblings inherit it, restating only the variant arrays whose values change. `check` +does not judge a base on its own; its arrays count where they reach a selectable preset, under +`check --strict`. The loader stores a base at its **own** `printer_extruder_variant`, one variant +when it writes none whatever its extruder count, and cuts a wider array to its first values before +any child inherits it; so a multi-extruder base whose extruders need different values declares the +layout itself ([composition](#padding-truncation-and-composition)). When a variant array can move from +the presets to a base is in [shared-bases.md](shared-bases.md#variant-arrays-on-a-base). + +## Process + +1. `print_extruder_variant` + `print_extruder_id` list the (extruder id, variant string) pairs of the + process's variants. A variant is found by that pair, never by position: what is **required** is + that every pair a compatible printer (by list or condition) can select is present, in any order. A + missing pair reads the process's variant index 0 for that extruder, an extra pair is a variant + nothing selects, and neither is reported. The exception is a single-extruder printer whose + `extruder_variant_list` offers one variant string: no pair is matched there and variant index 0 + is read, so a process shared with such a printer lists that printer's pair first. **Mirroring** the printer's `printer_extruder_variant` + + `printer_extruder_id` entry for entry is the convention; follow it, so the arrays compare by eye, + but a different order with every pair present is a nit, not a defect. A process shared by printers + whose pairs differ falls back to variant index 0 on the pairs it lacks; give each layout its own base. +2. Every key in `print_options_with_variant` ([the full list](#the-four-key-sets), which is not + "every speed") has exactly one value per variant, or is left out. `print_extruder_id` needs its + value per variant too: one value pads to extruder 1 everywhere. `check` holds a + `print_extruder_id` that reaches the preset, written or inherited, to one entry per variant on any + printer, without `--strict`, and warns when it is absent and a variant repeats. +3. Only add process variants if speeds or accelerations really differ per nozzle volume type or + extruder. Otherwise omit the variant keys: a one-variant process needs no list, because match and + no-match both read variant index 0, and that variant is copied to every extruder at slice time. +4. Put the lists on the process base for that printer layout, so leaves stay small. + +## Filament + +```json +"filament_extruder_variant": ["Direct Drive Standard", "Direct Drive High Flow"], +"filament_max_volumetric_speed": ["21", "29"], +"filament_flow_ratio": ["0.98", "0.98"], +"filament_retraction_length": ["nil", "0.4"] +``` + +1. `filament_extruder_variant` lists variants **without extruder ids**: a filament's High Flow variant + is used on whichever extruder is in High Flow. Its entries must be distinct, since the lookup + returns the first equal string and a repeated entry is a variant nothing selects. There is no + filament id key: `filament_extruder_id` exists only as a G-code placeholder, not as a filament + option (its option and its set entry are commented out in `PrintConfig.cpp`), so a filament file that writes it loses the key as unknown. + `filament_extruder_compatibility` is unrelated to variants (it says which extruders the filament + may be loaded into). +2. Every key in `filament_options_with_variant` ([the full list](#the-four-key-sets)) that reaches the + preset, whether written, included or inherited, is resized to its variant count: write it at exactly + that width, or leave it out. Keys outside the set + (`filament_type`, plate temperatures, `fan_max_speed`, `slow_down_min_speed`, `pressure_advance`, + …) are never addressed by variant index; the preset contributes their first value however wide a + file writes them. +3. Cover every variant the material is meant to print on across its `compatible_printers`. Leave out + a variant deliberately when the material should not be tuned for it (e.g. a TPU High Flow variant + only on TPU filaments); an extruder reporting that variant string then reads the first variant. +4. Order the variants like the printer's, Standard first, so the first-variant fallback is the + conservative one. +5. Tune what really differs: `filament_max_volumetric_speed` is the usual difference between nozzle + volume types, then flow ratio, temperature and retraction. Use measured values; never copy the + Standard value into the High Flow variant and call it tuned. +6. `nil` is legal per variant in the nullable override keys, occupies one entry like any value, and + keeps the printer's value for that variant only. +7. Declare a multi-variant list with the arrays it sizes: on the filament, in its own file or in a + template it pulls in with [`include`](vendor-bundle.md#inherits-and-include). The filament may be + compatible with printers that list fewer variants, or none: each printer takes the filament's variant + for its own variant string, else the filament's first variant. A one-variant list on a shared base + is harmless, because one variant is the width a list-less preset has anyway; and a list-less base is + stored at that width, so a wider array on it reaches its children as its first value only. + A key such a base writes reaches a multi-variant child as one value, which the loader spreads over + the child's variants; `check --strict` reports it at the child, which restates it at its own width. + +## Widths + +Every variant key is a flat array addressed by **variant index**: index `n` belongs to entry `n` of +the preset's own variant list (`printer_extruder_variant`, `print_extruder_variant` or +`filament_extruder_variant`). The index is found by exact compare of the string +`" "` (plus the 1-based extruder id for printer and process lists), +and the value is read at `index × stride`: + +| Stride | Keys | Layout | +| --- | --- | --- | +| 1 | `printer_options_with_variant_1`, `print_options_with_variant`, `filament_options_with_variant` | `[variant 0, variant 1, …]` | +| 2 | `printer_options_with_variant_2` (the `machine_max_*` limits) | `[variant 0 normal, variant 0 silent, variant 1 normal, variant 1 silent, …]` | + +So a variant array is `variant length × stride` long. The **variant length** is the number of +entries in the preset's variant list, counted on the preset's config **after** `include` and +`inherits` are applied, dead variants included. An inherited array arrives already resized to the +base's own variant length, an included one at the width its file wrote +([composition](#padding-truncation-and-composition)): + +| Preset | Variant length | +| --- | --- | +| `machine` | `len(printer_extruder_variant)`; without it, the variants `extruder_variant_list` offers; without both, **one per extruder** (`len(nozzle_diameter)`), since the list's default is one `Direct Drive Standard` per extruder. `extruders_count` is a printer-tab field, not a preset key. The loader honours that default only halfway for a system preset: it sizes the composed preset by the one-entry default `printer_extruder_variant`, cutting every variant array to its first value, and only then (with `single_extruder_multi_material` off) rebuilds the pair to one variant per extruder ([Printer rule 2](#printer-machine)) and pads the arrays with that value. The rule's width is still one per extruder; to give extruders different values, declare the layout. | +| `process` | `len(print_extruder_variant)`; without one, 1 | +| `filament` | `len(filament_extruder_variant)`; without one, 1 | + +The per-extruder keys in `printer_extruder_options` ([listed with the sets](#the-four-key-sets)) are +outside this scheme and stay one value per extruder. Keys outside [the four sets](#the-four-key-sets) +are never variant-resized or addressed by variant index, however wide a shipped file writes them; a +per-extruder vector holds `len(nozzle_diameter)` values, and a shorter one acts as padded with its +first value ([machine-profiles.md](machine-profiles.md#multi-extruder-idex-and-tool-changers)). + +### Sizing equation + +For a key in one of the four variant sets: + +``` +E = extruders = len(nozzle_diameter) = len(extruder_type) + = len(default_nozzle_volume_type) = len(extruder_variant_list) +V_i = variants listed for extruder i = ","-separated entries of extruder_variant_list[i], + each " " +S = variant length = V_1 + V_2 + … + V_E + = len(printer_extruder_variant) = len(printer_extruder_id) +k = stride = 2 for printer_options_with_variant_2, else 1 + +N = values the key holds, one per variant: + machine (printer_options_with_variant_1, _2) = S × k + process (print_options_with_variant) = len(print_extruder_variant) = len(print_extruder_id) + filament (filament_options_with_variant) = len(filament_extruder_variant) +values[s × k + m] = variant index s, mode m (m = 0 normal, m = 1 silent; only m = 0 at stride 1) +variant index s = (printer_extruder_id[s], printer_extruder_variant[s]) +``` + +`printer_extruder_variant` is not sized by the equation; it defines `S`: it is `extruder_variant_list` +flattened extruder by extruder, and `printer_extruder_id[s]` is the extruder that index `s` came from. +A process that mirrors the printer's pairs, as [Process rule 1](#process) asks, has `N = S`; a +filament lists each variant string it is tuned for once, with no extruder id, so its `N` is its own +and independent of any one printer: it serves every printer in its `compatible_printers`, and a +variant string no extruder of a printer reports is simply never read there (a two-extruder printer +with `S = 7` serves a filament whose `N` is 3, and the filament keeps its 3 on a printer that offers +two variant strings). The +pair is what the loader reads, so the equality with the sum holds when the three keys agree, as +[Printer rule 2](#printer-machine) requires. + +A selectable preset that writes a variant key writes it at its own `N`; any other width, one value +included, is an error. A preset that leaves a key out takes what reaches it, the default or an array +it inherits or includes, which the loader resizes to the preset's `N`; `check --strict` holds that +array to the preset's `N` too. A base is not judged on its own: its arrays count only where they reach +a preset that does not override them. BBL is the model for strict: every printer-specific machine, +process and filament declares its layout and restates every variant key at its own `N`, even where all +the values are the same, keys Orca added to the sets included. +Without the lists, `extruder_variant_list` defaults to one +`Direct Drive Standard` per extruder, so a machine has `V_i = 1` and `S = E`, and a process or filament +has `N = 1`; the loader cuts a list-less machine to its first variant and, with +`single_extruder_multi_material` off, widens it again with that value ([variant length](#widths)). The per-extruder keys outside the sets +(`printer_extruder_options` plus `extruder_offset` and `extruder_colour`) and `extruder_variant_list` +itself hold `E` values. + +### Sizing examples + +**One extruder, two nozzle volume types**: `E = 1`, `V_1 = 2`, so `S = 2`; stride-1 keys hold 2 +values, `machine_max_*` hold 4: + +```json +"nozzle_diameter": ["0.4"], +"extruder_type": ["Direct Drive"], +"extruder_variant_list": ["Direct Drive Standard,Direct Drive High Flow"], +"printer_extruder_id": ["1", "1"], +"printer_extruder_variant": ["Direct Drive Standard", "Direct Drive High Flow"], +"default_nozzle_volume_type": ["Standard"], +"retraction_length": ["0.8", "1.0"], +"machine_max_speed_x": ["500", "200", "600", "250"] +``` + +The matching process lists the same two pairs (`print_extruder_id` `["1", "1"]`, +`print_extruder_variant` as above) and holds 2 values per key, e.g. `outer_wall_speed` +`["200", "260"]`; a filament for it lists `["Direct Drive Standard", "Direct Drive High Flow"]` and +holds 2 values per key, e.g. `filament_max_volumetric_speed` `["16", "24"]`. + +**Four extruders, one nozzle volume type each** (a tool changer): `E = 4`, every `V_i = 1`, so +`S = 4`; stride-1 keys hold 4 values, `machine_max_*` hold 8: + +```json +"nozzle_diameter": ["0.4", "0.4", "0.6", "0.4"], +"extruder_type": ["Direct Drive", "Direct Drive", "Direct Drive", "Direct Drive"], +"extruder_variant_list": ["Direct Drive Standard", "Direct Drive Standard", + "Direct Drive Standard", "Direct Drive Standard"], +"printer_extruder_id": ["1", "2", "3", "4"], +"printer_extruder_variant": ["Direct Drive Standard", "Direct Drive Standard", + "Direct Drive Standard", "Direct Drive Standard"], +"default_nozzle_volume_type": ["Standard", "Standard", "Standard", "Standard"], +"retraction_length": ["0.8", "0.8", "1.2", "0.8"], +"machine_max_speed_x": ["500", "200", "500", "200", "500", "200", "500", "200"] +``` + +The (normal, silent) pair is repeated per extruder: `["500", "200"]` would be width 2 against +`S × k = 8` (the loader pads it to `500, 200, 500, 500, …`) and `["500"]` width 1; both are errors. The +process mirrors the four pairs (`print_extruder_id` `["1", "2", "3", "4"]`) with 4 values per key, or +omits the variant keys altogether when nothing differs per extruder (then one value per key). A +filament for it lists only `["Direct Drive Standard"]`: one entry, so one value per key. Drop the +layout from this printer and the widths stay the same, since the default list gives `S = E = 4`; but +the loader then keeps only the first variant ([variant length](#widths)): `retraction_length` +becomes `0.8` on every extruder and extruder 3 loses its `1.2`. + +### Adding a variant inserts its values at its variant index + +Indexes run extruder-major: extruder 1's variants in `extruder_variant_list` order, then extruder +2's. A new variant's values go in at its index, not at the end. Giving extruder 1 of a two-extruder +printer a High Flow option, when only extruder 2 had one: + +| Key | Before | After | +| --- | --- | --- | +| `extruder_variant_list` | `["Direct Drive Standard", "Direct Drive Standard,Direct Drive High Flow"]` | `["Direct Drive Standard,Direct Drive High Flow", "Direct Drive Standard,Direct Drive High Flow"]` | +| `printer_extruder_id` | `["1", "2", "2"]` | `["1", "1", "2", "2"]` | +| `printer_extruder_variant` | `[Standard, Standard, High Flow]` | `[Standard, High Flow, Standard, High Flow]` (full strings in the file) | +| `retraction_length` (stride 1) | `["0.8", "1.0", "1.2"]` | `["0.8", "?", "1.0", "1.2"]`: one value at index 1 | +| `machine_max_speed_x` (stride 2) | `["500", "200", "600", "250", "700", "300"]` | `["500", "200", "?", "?", "600", "250", "700", "300"]`: a (normal, silent) pair at position 2 | +| `print_extruder_id` / `print_extruder_variant` / `outer_wall_speed` | mirror the printer | the same insertion at index 1 | +| `filament_extruder_variant` `[Standard, High Flow]` | — | unchanged: filament variants carry no extruder id, so the existing High Flow variant now serves both extruders | + +Every `?` is a measured value for that nozzle, on the machine limits as much as on retraction. +Removing or renaming a variant shifts the later values the same way in reverse; a variant string that +no longer matches the enum is simply a variant nothing selects. + +### Padding, truncation and composition + +**Every key in the set widens, whether or not a file restates it.** At load each variant key of the +composed config is resized to the length of the preset's own `*_extruder_variant` (the one-entry +default when it writes none) × stride: a short array is **padded by repeating its first value**, a +long one is truncated to its first values, without a word from the loader or the validator. The rule +does not follow from this padding: a file writes a variant key at **exactly `variant length × stride`** +or not at all. Any other length, one value included (which the loader spreads over every variant, at +stride 2 over normal *and* silent alike), is a mistake the loader hides and +`orca_profile_tool.py check` reports as an error in the selectable preset that writes it, even when +every value is the same; `check --strict` also reports an array that reaches a selectable preset at +another width +([variant arrays](validation.md#variant-arrays)). + +The loader sizes a list-less preset of any type to one variant at this step, a list-less machine +included: a two-extruder machine without a layout that writes `retraction_length` `["0.8", "0.9"]`, the +width the equation asks for, stores `["0.8"]`, which the pair rebuild and the slice-time collapse hand +to both extruders. A 3-value array on a preset of variant length 2 keeps its first two; at length 4 it +becomes `[a, b, c, a]`. + +Composition hands down widths in two ways: + +- **`inherits` hands down the parent's resized arrays.** A base is stored after its own resize, at + the length of its own `*_extruder_variant` (one variant for a base of any type that writes none, + whatever its extruder count), so an array wider than the base's list is cut to its first values + before any child sees it, and a child that adds variants gets those first values padded. Widen an + array only on a preset whose own resolved list already has the entries. `check` judges selectable + presets only, at the width each file wrote: an array a base's own resize cuts is not seen (a review + item), and an inherited array of another width than a child's list is left to the loader's resize + unless `check --strict`, which asks the child to restate it at its own width. +- **`include` hands down the template's diff at its pre-resize width.** The template contributes every + key where its composed config differs from the built-in defaults, taken before its own resize, so the + arrays it writes arrive at the width its file wrote, and the includer's own list sizes them. A key the + template sets to the built-in default is not passed on + ([`include`](vendor-bundle.md#inherits-and-include)). + +The id keys are the trap in this padding: `printer_extruder_id` and `print_extruder_id` are members +with default `[1]`, so a missing or one-value id array beside a longer variant list is padded to +extruder 1 at every index. That is right on a single-extruder printer and wrong on a multi-extruder +one, where every variant is then addressed as extruder 1's. A machine escapes it only where the +load-time pair rebuild of [Printer rule 2](#printer-machine) runs (`single_extruder_multi_material` +off); a process's `print_extruder_id` is never rebuilt at load. `check` +holds an id array that reaches a selectable preset, written or inherited, to one entry per variant on +any printer; `fix-variant` never pads an id array or a variant list, since those address the +variants rather than fill them. + +Consequences: + +- A base that gains a variant silently pads every descendant that restates a variant array at the old + width, and a short `machine_max_*` array copies variant 0's *normal* limit into the silent entries + too; a descendant that restates nothing inherits the widened array and needs no edit. Extend, in one + change: the printer base and each nozzle-diameter sibling that restates a variant array, the process + bases that mirror the printer's variants, and the filaments that should cover the variant. +- A one-value override is reported, and the loader spreads it over **all** variants, overwriting the + ones that should differ. +- A process or filament that omits the new variant is not padded; the variant resolves to its index 0. + +### Slice time and existing users + +**Slice time collapses variants to extruders.** When printer, process and filaments are combined on a +printer with several extruders or several variant strings, each printer and process variant key is +re-gathered to one entry per extruder (× stride) in extruder order, using each extruder's live nozzle +volume type, or to one entry per nozzle volume type for an extruder that holds several (Hybrid, or +`extruder_nozzle_stats` listing more types than there are extruders); on any other printer they are +not re-gathered and variant index 0 is read. Filament keys are re-gathered to one entry per filament, +on a printer with a single variant too once a filament has several variants, and under a dynamic +nozzle map to one entry per variant each filament prints through. Custom G-code and the +`machine_max_*` limits therefore index by extruder or filament, never by variant index; variant order +matters only inside the preset. An extruder with no matching variant reads variant index 0, extruder +1's first variant, whichever extruder it is; under layered nozzle grouping, `get_config_index_base` +reads the collapsed arrays and falls back to the same extruder's first entry instead. + +**Existing user presets and projects follow the variant string, not the position.** A user preset +stores every variant array it changed (nullable keys as per-variant diffs, `nil` where equal to the +parent). On load each parent variant takes the child's value for the variant with the same extruder id +and variant string; variants the parent gained keep the parent's value, and a child whose arrays the +parent cannot map keeps its own. Per-object process overrides are remapped when a printer change +alters the extruder count or the length of `printer_extruder_variant`, by variant string alone (no +extruder id; of several matching values the smallest wins), and a single-value override applies to +every variant. Adding or reordering variants in a shipped preset is therefore safe for existing +users; renaming a variant, or moving it to another extruder id, loses their values for it. + +**A new nozzle volume type changes no array.** Adding one to the code widens nothing until a profile +lists the new variant string; until then every existing array keeps its length and meaning. + +## The four key sets + +Membership is literal (four `std::set` initializers in `src/libslic3r/PrintConfig.cpp`) +and **not guessable from names**: `ironing_speed`, `skirt_speed`, `wipe_speed`, `scarf_joint_speed`, +`small_support_perimeter_speed` and `wipe_tower_max_purge_speed` are process speeds outside the set, +while every process `*_acceleration` and `*_jerk` key is inside, and so are +`small_perimeter_threshold`, `top_solid_infill_flow_ratio` and `slowdown_for_curled_perimeters`; +`filament_flush_temp` is in and `filament_flush_temp_fast` out; `use_firmware_retraction` is out and +`travel_slope` and `retract_lift_enforce` in. The three variant-list keys and the two id +keys are members of their own set (the list sizes itself, a no-op; the id keys are padded like any +other member, [the id trap](#padding-truncation-and-composition)), while `extruder_variant_list` is in +no set: the variant-length resize leaves it alone, and only the pair rebuild of +[Printer rule 2](#printer-machine) pads it. The per-extruder `printer_extruder_options` is listed +last for contrast; it is not a variant set. + +`check` and `fix-variant` read the four sets from `PrintConfig.cpp` on every run, so they follow the +engine. The lists below are from the 2026-09-25 checkout; regenerate them from the repository root +before relying on them (the recipe strips comments, since an initializer can carry a commented-out entry): + +```bash +python3 - <<'EOF' +import re +src = open('src/libslic3r/PrintConfig.cpp', encoding='utf-8', errors='replace').read() +for name in ['printer_options_with_variant_1', 'printer_options_with_variant_2', + 'print_options_with_variant', 'filament_options_with_variant', + 'printer_extruder_options']: + body = re.search(r'std::set\s+' + name + r'\s*=\s*\{(.*?)\};', src, re.S).group(1) + body = re.sub(r'/\*.*?\*/', '', body, flags=re.S) + body = re.sub(r'//[^\n]*', '', body) + print(name, sorted(set(re.findall(r'"([^"]+)"', body)))) +EOF +``` + +**`printer_options_with_variant_1`**, machine, stride 1 (27): `deretraction_speed`, `hotend_cooling_rate`, `hotend_heating_rate`, `long_retractions_when_cut`, `nozzle_flush_dataset`, `nozzle_type`, `nozzle_volume`, `printer_extruder_id`, `printer_extruder_variant`, `retract_after_wipe`, `retract_before_wipe`, `retract_length_toolchange`, `retract_lift_above`, `retract_lift_below`, `retract_lift_enforce`, `retract_restart_extra`, `retract_restart_extra_toolchange`, `retract_when_changing_layer`, `retraction_distances_when_cut`, `retraction_length`, `retraction_minimum_travel`, `retraction_speed`, `travel_slope`, `wipe`, `wipe_distance`, `z_hop`, `z_hop_types` + +**`printer_options_with_variant_2`**, machine, stride 2 (16): `machine_max_acceleration_e`, `machine_max_acceleration_extruding`, `machine_max_acceleration_retracting`, `machine_max_acceleration_travel`, `machine_max_acceleration_x`, `machine_max_acceleration_y`, `machine_max_acceleration_z`, `machine_max_jerk_e`, `machine_max_jerk_x`, `machine_max_jerk_y`, `machine_max_jerk_z`, `machine_max_junction_deviation`, `machine_max_speed_e`, `machine_max_speed_x`, `machine_max_speed_y`, `machine_max_speed_z` + +**`print_options_with_variant`**, process, stride 1 (45): `bridge_acceleration`, `bridge_speed`, `default_acceleration`, `default_jerk`, `default_junction_deviation`, `enable_overhang_speed`, `gap_infill_speed`, `infill_jerk`, `initial_layer_acceleration`, `initial_layer_infill_speed`, `initial_layer_jerk`, `initial_layer_speed`, `initial_layer_travel_acceleration`, `initial_layer_travel_jerk`, `initial_layer_travel_speed`, `inner_wall_acceleration`, `inner_wall_jerk`, `inner_wall_speed`, `internal_bridge_speed`, `internal_solid_infill_acceleration`, `internal_solid_infill_speed`, `outer_wall_acceleration`, `outer_wall_jerk`, `outer_wall_speed`, `overhang_1_4_speed`, `overhang_2_4_speed`, `overhang_3_4_speed`, `overhang_4_4_speed`, `print_extruder_id`, `print_extruder_variant`, `slowdown_for_curled_perimeters`, `small_perimeter_speed`, `small_perimeter_threshold`, `sparse_infill_acceleration`, `sparse_infill_speed`, `support_interface_speed`, `support_speed`, `top_solid_infill_flow_ratio`, `top_surface_acceleration`, `top_surface_jerk`, `top_surface_speed`, `travel_acceleration`, `travel_jerk`, `travel_speed`, `travel_speed_z` + +**`filament_options_with_variant`**, filament, stride 1 (48): `activate_air_filtration`, `activate_air_filtration_during_print`, `activate_air_filtration_on_completion`, `complete_print_exhaust_fan_speed`, `during_print_exhaust_fan_speed`, `filament_adaptive_volumetric_speed`, `filament_cooling_before_tower`, `filament_deretraction_speed`, `filament_extruder_variant`, `filament_flow_ratio`, `filament_flush_temp`, `filament_flush_volumetric_speed`, `filament_ironing_flow`, `filament_ironing_inset`, `filament_ironing_spacing`, `filament_ironing_speed`, `filament_long_retractions_when_cut`, `filament_max_volumetric_speed`, `filament_pre_cooling_temperature`, `filament_pre_cooling_temperature_nc`, `filament_preheat_temperature_delta`, `filament_ramming_travel_time`, `filament_ramming_travel_time_nc`, `filament_ramming_volumetric_speed`, `filament_ramming_volumetric_speed_nc`, `filament_retract_after_wipe`, `filament_retract_before_wipe`, `filament_retract_length_nc`, `filament_retract_length_toolchange`, `filament_retract_lift_above`, `filament_retract_lift_below`, `filament_retract_lift_enforce`, `filament_retract_restart_extra`, `filament_retract_restart_extra_toolchange`, `filament_retract_when_changing_layer`, `filament_retraction_distances_when_cut`, `filament_retraction_length`, `filament_retraction_minimum_travel`, `filament_retraction_speed`, `filament_wipe`, `filament_wipe_distance`, `filament_z_hop`, `filament_z_hop_types`, `long_retractions_when_ec`, `nozzle_temperature`, `nozzle_temperature_initial_layer`, `retraction_distances_when_ec`, `volumetric_speed_coefficients` + +**`printer_extruder_options`**, machine, one value per extruder, not a variant set (8): +`default_nozzle_volume_type`, `extruder_max_nozzle_count`, `extruder_printable_area`, +`extruder_printable_height`, `extruder_type`, `max_layer_height`, `min_layer_height`, +`nozzle_diameter`. These are never addressed by variant index; `extruder_offset`, `extruder_colour` and +`extruder_variant_list` are per extruder too. A shorter array acts as padded with its first value, and +entries beyond the extruder count are never read +([per-extruder vectors](machine-profiles.md#multi-extruder-idex-and-tool-changers)). + +## Checking and testing + +Checklist for a new variant profile set: + +1. Decide the variants per extruder from the real hardware; pick legal strings only. +2. Printer base: `extruder_type`, `extruder_variant_list`, flattened `printer_extruder_variant` + + `printer_extruder_id`, `default_nozzle_volume_type`; every variant array at variant length, every + `machine_max_*` at 2 × variant length as (normal, silent) pairs, even where the values are the + same, values in variant order. +3. A process base per variant layout, or no variant keys at all. +4. Filaments for the printer: a variant list covering the intended variants, every variant key at that + width, measured values per nozzle volume type. +5. Run the usual authoring commands and full checks. `check` holds each array of steps 2–4 to the + width of the selectable preset that writes it, `check --strict` also to every selectable preset it + reaches, and + the printer's layout keys through every selectable preset + ([variant arrays](validation.md#variant-arrays)); `check_variant_names` holds every variant string, + `extruder_type`, `nozzle_volume_type` and `default_nozzle_volume_type` to the enums + ([variant names](validation.md#variant-names)). The choice of variants, the variant order and + the measured values are not checked. +6. In the app, for each nozzle volume type in the sidebar combo: slice and confirm the G-code uses that + variant's values (e.g. volumetric speed limit, retraction). `validate_slice` only slices the default + nozzle volume type. + +To review rather than author, run the same list against the diff. `check` catches a wrong array length, +a layout key out of step, and a variant string the enums cannot build. The failures no check catches: a +new variant appended instead of inserted at its index, an array widened on a base whose list is +shorter (cut before any child inherits it), a process lacking a pair its printer can select, and a High +Flow variant copied from Standard. + +### UI facts to design around + +- The single-extruder sidebar shows a **nozzle volume type combo** (tooltip `Flow`, in place of the + nozzle-diameter selector) only when `extruder_variant_list` offers more than one distinct variant + string (`support_different_extruders`); four extruders listing `Direct Drive Standard` each show + none. +- The two-extruder sidebar's per-extruder nozzle volume type combos are shown for BBL printers only. + Another vendor's multi-extruder printer falls back to the single-extruder layout: one combo (for the + first extruder) when the variants differ, otherwise the nozzle-diameter selector, so the other + extruders' nozzle volume type stays at `default_nozzle_volume_type`. +- High Flow is hidden from the combo when `printer_variant` is `0.2` or the printer model is + `Bambu Lab X1E`, and E3D High Flow unless `printer_variant` is `0.4` or `0.6`. A variant listed on + another nozzle diameter is never selectable there. +- The filament tab shows a variant switch built from the filament's own `filament_extruder_variant`; + a multi-variant filament whose tab shows none did not resolve its variant list through `include` or + `inherits`. The printer and process tabs show one entry per extruder instead, labelled with that + extruder's live nozzle volume type (two for Hybrid), and only on two-extruder printers whose + `extruder_variant_list` offers more than one variant string; elsewhere they edit the variant of the + nozzle volume type selected in the sidebar (an X1C shows no switch). + +### Worked examples in the tree + +`BBL/machine/fdm_bbl_3dp_001_common.json` (one extruder), `fdm_bbl_3dp_002_common.json` (two +extruders), `Bambu Lab X1 Carbon 0.4 nozzle.json` (Standard + High Flow), `Bambu Lab H2D 0.4 +nozzle.json` (extruders with different variant sets), `Bambu Lab X2D 0.4 nozzle.json` (Direct Drive + +Bowden), with their `@BBL` processes and filaments. The H2D and X2D examples also carry +`E3D High Flow` variants. BBL's multi-variant filament lists come from `fdm_filament_template_*` +presets that the printer-specific filaments pull in with `include`, not from their `inherits` chain. diff --git a/.claude/skills/orca-profiles/references/filament-profiles.md b/.claude/skills/orca-profiles/references/filament-profiles.md index d6679d9122..bc80176eaa 100644 --- a/.claude/skills/orca-profiles/references/filament-profiles.md +++ b/.claude/skills/orca-profiles/references/filament-profiles.md @@ -1,8 +1,8 @@ # Filament profiles and OrcaFilamentLibrary -`OrcaFilamentLibrary` is the filament-only bundle the loader reads **first**; its config map -becomes the base bundle, so any vendor may inherit a library preset by name. It is the only cross-bundle -parent — vendor-to-vendor inheritance always fails. +`OrcaFilamentLibrary` is the filament-only bundle the loader reads **first**, so any vendor's filament may +inherit a library preset by name. It is the only cross-bundle parent: vendor-to-vendor inheritance +always fails. ## Where a filament goes @@ -10,54 +10,65 @@ parent — vendor-to-vendor inheritance always fails. | --- | --- | | Generic material for all printers | `OrcaFilamentLibrary/filament/Generic @System.json` | | A brand's product, all printers | `OrcaFilamentLibrary/filament//` | -| A brand's tune for one printer | `OrcaFilamentLibrary/filament///` — recommended; `/filament//` also works | -| A printer vendor's tune of a generic or its own product | `/filament/` | +| A brand's tune for one printer vendor | `OrcaFilamentLibrary/filament///` (recommended); `/filament//` also works | +| A printer vendor's tune of a generic, or its own product | `/filament/` | -Both locations for the last-but-one row are supported: `OrcaFilamentLibrary/filament///.json` +Both locations in the third row are supported: `OrcaFilamentLibrary/filament///.json` (the shape the wiki shows) and `/filament//`. The library path is the one a -filament vendor should contribute to — `OrcaFilamentLibrary/filament//` is the brand's own -folder, while a printer vendor's folder belongs to that printer vendor. Brand tunes do ship under -printer vendors' folders today (Polymaker and SUNLU among others). +filament brand should contribute to: `OrcaFilamentLibrary/filament//` is the brand's own folder, +while a printer vendor's folder belongs to that printer vendor. -Library layout: `filament/base/fdm_filament_*.json` type roots, root-level `Generic @System.json` -generics, and one subfolder per brand, which may nest printer-specific tunes one level deeper. Adding -a brand means adding a folder here; the folder name is a directory label only — `filament_vendor` inside the JSON is the real vendor string. +Library layout: `filament/base/fdm_filament_*.json` material roots, root-level +`Generic @System.json` generics, and one subfolder per brand, which may nest printer-specific +tunes one level deeper. Adding a brand means adding a folder here; the folder name is a directory label +only, and `filament_vendor` inside the JSON is the real vendor string. ## The three-part shape ```jsonc -// Fiberon PA6-CF @base.json — the product root, holds identity + material values +// OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @base.json — the product root: identity + material values { "type": "filament", "name": "Fiberon PA6-CF @base", "from": "system", "instantiation": "false", "inherits": "fdm_filament_pa", - "filament_id": "OFkOviHk", // generated here; variants inherit it + "filament_id": "OFkOviHk", // minted here by generate-id; every child inherits it "filament_vendor": ["Polymaker"], "filament_type": ["PA6-CF"], /* … */ } -// Fiberon PA6-CF @System.json — the selectable shim, 7 keys +// OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF @System.json — the selectable all-printer shim, 7 keys { "type": "filament", "name": "Fiberon PA6-CF @System", "from": "system", "instantiation": "true", "inherits": "Fiberon PA6-CF @base", "setting_id": "…", "compatible_printers": [] } -// /filament/Polymaker/Fiberon PA6-CF @BBL X1C.json — a printer tune -{ … "inherits": "Fiberon PA6-CF @base", "filament_max_volumetric_speed": ["14"], +// BBL/filament/Polymaker/Fiberon PA6-CF @BBL X1C.json — a printer tune (BBL keeps its own copy of the @base) +{ …, "inherits": "Fiberon PA6-CF @base", "filament_max_volumetric_speed": ["14"], "compatible_printers": ["Bambu Lab X1 Carbon 0.4 nozzle", …] } ``` -- `@base` is the convention for a root. A base carries **no** `setting_id`, no `compatible_printers`, no - `filament_settings_id`. Only the `setting_id` half is enforced, and nothing violates it; the other two - are unchecked and plenty of bases still carry them. Do not copy that from a neighbouring file. -- Every `@System` must be `"instantiation": "true"`. DREMC ships `@System` presets set to `"false"`, - which therefore ship but can never be selected; no check catches it. -- A duplicated brand `@base` across bundles is normal and intentional (`Fiberon PA6-CF @base` exists in - both the library and BBL with the same id, differing only in MVS) — bases never enter the preset - collection, so there is no duplicate-name error. -- You may inherit from an instantiated preset as well as from a base; it is common. +- `@base` is the convention for a root; a root is really `instantiation: "false"`. A base carries + **no** `setting_id`, no `compatible_printers` and no `filament_settings_id`. Only the `setting_id` + half is enforced; the other two are unchecked, so a neighbouring base that carries them is no model. +- Every `@System` shim must be `"instantiation": "true"`; one set to `"false"` would ship but could + never be selected, and no check catches it. The shim exists only for products in the library. +- `filament_cost`, `filament_density`, `filament_type` and `filament_vendor` belong on the root and + should not appear in a printer tune. +- A brand `@base` duplicated across bundles is legal (a vendor bundle may keep its own copy of a + library product root, with the same id): bases never become selectable presets and the + duplicate-name error covers only those, so there is none. +- You may inherit from an instantiated preset as well as from a base. + +## Colour is a runtime property + +`filament_id` identifies a product, not a colour; filament sync and AMS read the colour from the spool +at runtime. A product ships one all-printer preset and the colour is chosen at runtime, never a sibling +preset that differs only by colour. A material family (PLA vs PLA Matte vs PLA Silk) is a new product; +a colour is not. A printer tune keeps the product alias and does not multiply per colour either. + +CI does not catch this (per-colour presets pass `check`), so it is a review call. ## The two most common contributions -**A printer vendor tuning a generic.** Keep the `Generic X` base name so the alias shadows the library -preset on your printers, inherit `Generic X @System`, declare **no** `filament_id` (inheriting the -library's is correct — the product really is the library's generic), and give it a non-empty -`compatible_printers` in its own body: +**A printer vendor tuning a generic.** Keep the `Generic X` alias so it shadows the library preset on +your printers, inherit `Generic X @System`, declare **no** `filament_id` (inheriting the library's is +correct: the product really is the library's generic), and give it a non-empty `compatible_printers` in +its own file: ```jsonc // /filament/Generic PETG @Acme One 0.4 nozzle.json @@ -67,13 +78,14 @@ library's is correct — the product really is the library's generic), and give "compatible_printers": ["Acme One 0.4 nozzle"] } ``` -**A printer vendor's own branded product.** Give it a `@base` root so `generate-id` can mint the id (see -[ids.md](ids.md) — inheriting `Generic X @System` directly makes the id unfixable by the tool), then one -instantiated leaf per printer in the same bundle. No `@System` shim: that is only for a product entering -OrcaFilamentLibrary. +**A printer vendor's own branded product.** Give it a `@base` root on a material base so `generate-id` +can mint the id, then one instantiated leaf per printer in the same bundle. Inheriting +`Generic X @System` directly gives the product the generic's id, which the tool cannot fix +([ids.md](ids.md#what-generate-id-does-and-does-not-fix)). No `@System` shim: that is only for a product +entering OrcaFilamentLibrary. ```jsonc -// /filament/Acme Aura PETG @base.json — instantiation false, no setting_id +// /filament/Acme Aura PETG @base.json — instantiation false, no setting_id { "type": "filament", "name": "Acme Aura PETG @base", "from": "system", "instantiation": "false", "inherits": "fdm_filament_pet", "filament_vendor": ["Acme"], "filament_type": ["PETG"] } // filament_id minted here @@ -85,174 +97,190 @@ OrcaFilamentLibrary. "compatible_printers": ["Acme One 0.4 nozzle"] } ``` -Omit `filament_settings_id` from new presets — it is runtime bookkeeping the app rewrites to the preset +Omit `filament_settings_id` from new presets: it is runtime bookkeeping the app rewrites to the preset name. +To offer either kind by default, add its name to each model's `default_materials`; put it first in the +machine's `default_filament_profile` only if it should be the preselected filament +([machine keys](machine-profiles.md#other-keys)). + ## `compatible_printers` -- **Library fallbacks:** empty `[]` or absent, so they are offered on all printers except where - [alias shadowing](#alias-shadowing) supplies a printer-specific tune. -- **Library printer-specific tunes:** non-empty, listing exact printer **variant** names. These can +- **Library fallbacks** (`@System`): empty `[]` or absent, so they are offered on all printers except + where [alias shadowing](#alias-shadowing) supplies a printer-specific tune. +- **Library printer-specific tunes**: non-empty, listing exact printer **variant** names. These supersede a same-alias fallback just like a tune in a printer vendor's bundle. -- **Instantiated filaments in every other vendor:** non-empty, listing exact printer **variant** names. - Enforced twice but not identically: the C++ `has_errors` reads the *flattened* config, so an inherited list satisfies it, - while the Python check reads the file's **own** key. Write the list in the file itself. This is the - most common filament CI failure. -- Emptying it to "make it apply everywhere" fails that check *and* creates a duplicate-`filament_id` - collision against the library generic on every printer. -- Copying a base's full printer list onto a nozzle-specific variant produces duplicate combobox entries — - a real shipped bug twice over. +- **Instantiated filaments in every other vendor**: non-empty, listing exact printer **variant** names. + Enforced twice, but not identically: `validate_system` reads the resolved config, so an inherited list + satisfies it, while `check` reads the file's **own** key. Write the list in the file itself. This is + the most common filament CI failure. +- Emptying it to "make it apply everywhere" fails that check *and* collides with the library generic's + `filament_id` on every printer. +- Copying a base's full printer list onto a nozzle-specific tune produces duplicate combobox entries: a + real shipped bug twice over. ## Overlapping coverage: one variant, one profile per product -`filament_id` is the **product** key, not the preset key — every variant of one product shares it -(`//`). So if one printer variant appears in the -`compatible_printers` of two presets of that product, the slicer cannot tell them apart at AMS match time. -The C++ validator reports `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"`. -`orca_profile_tool.py check` does **not** see it and passes. Resolve the overlap by **specificity**: keep -the variant on the most specific profile and remove it from every more general one. Deleting a profile is -the least preferred fix — moving coverage keeps the tune that users rely on. +`filament_id` is the **product** key, not the preset key: every preset of one product shares it +(`//`). So if one printer variant appears in the +`compatible_printers` of two presets of that product, the slicer cannot tell them apart at AMS match +time. `validate_system` reports `Ambiguous AMS filament match: N filament presets share filament_id "X" +and are all compatible with printer "Y"`; `orca_profile_tool.py check` does **not** see it and passes. +Resolve the overlap by **specificity**: keep the variant on the most specific profile and remove it from +every more general one. Deleting a profile is the least preferred fix: moving coverage keeps the tune +that users rely on. -Judge specificity from the profile's `compatible_printers` — how many variants it actually covers — and -use the name only as a secondary, easily-vague hint; decide by the lists, with a best judgement call on -the name. Naming conventions differ by vendor: BBL's is the reference (`@ ` for a whole +Judge specificity from the profile's `compatible_printers` (how many variants it actually covers) and +use the name only as a secondary, often vague hint; decide by the lists, with a judgement call on the +name. Naming conventions differ by vendor: BBL's is the reference (`@ ` for a whole model, `@ nozzle` for one variant, `@` for a vendor-wide generic), but others vary (`@`, a printer serial, or Creality's `@-all`). A name never overrides -the list — see [preset naming](naming.md) for the shapes. +the list; see [preset naming](naming.md#filament) for the shapes. Specificity, most to least: -1. **Variant-specialized** — lists a single printer variant (BBL-style - `... @ nozzle`). -2. **Model-specialized** — lists the variants of one printer model (BBL-style `... @ `). - It should cover every variant of its model, not only the nozzle it was authored for. -3. **Family / series** — lists variants spanning a printer family or series. -4. **Generic / catch-all** — vendor-wide, covering many unrelated models (often the bare +1. **Variant-specialized**: lists a single printer variant (BBL-style + `… @ nozzle`). +2. **Model-specialized**: lists the variants of one printer model (BBL-style `… @ `). It + should cover every variant of its model, not only the nozzle it was authored for. +3. **Family / series**: lists variants spanning a printer family or series. +4. **Generic / catch-all**: vendor-wide, covering many unrelated models (often the bare `Generic @`). Rules: - A model-specialized profile is extended to **all** variants of its model, and each variant it thereby - starts covering is removed from the family and generic profiles that also listed it — including variants - that had no overlap before. Apply it per nozzle, not just 0.4. + starts covering is removed from the family and generic profiles that also listed it, including + variants that had no overlap before. Apply it per nozzle, not just 0.4. - Apply it **per product**: trim only the material that has a specialized profile from the generic; a material whose product has no specialized profile keeps the variant in the generic. - Never strip coverage a variant has nowhere else to get. If a variant has no variant-level specialized - profile, the next level down keeps it; when the model has specialized profiles, the model-level one wins - over the family/generic. -- Moving coverage is preferred over deleting. If a profile must be deleted, remove the more general - one, not the specialized profile that carries the tune. -- After moving coverage, repoint the affected `default_filament_profile` (machine) and clean the model's - `default_materials`: they should name the most specific profile that covers the variant, and should not - keep generic entries that no longer cover the model. This rule applies equally when adding or fixing - defaults. + profile, the next level down keeps it; when the model has specialized profiles, the model-level one + wins over the family and generic ones. +- Moving coverage is preferred over deleting. If a profile must be deleted, remove the more general one, + not the specialized profile that carries the tune. +- After moving coverage, repoint the affected machine's `default_filament_profile` and clean the model's + `default_materials`: they should name the most specific profile that covers the variant, and should + not keep generic entries that no longer cover the model. This rule applies equally when adding or + fixing defaults. -Multiple profiles of one product with **disjoint** `compatible_printers` is the intended end state. +Several profiles of one product with **disjoint** `compatible_printers` is the intended end state. Adding coverage to the specialized profile and removing it from the generic is the preferred direction. -**Detection caveat:** `orca_profile_tool.py check` is blind to this; only the C++ validator behind the full -`./scripts/check_profile.sh` reports it (`validate_system`). Always confirm with that, not the vendor-scoped -loop. +**Detection caveat:** `orca_profile_tool.py check` is blind to this; only the validator behind the full +`./scripts/check_profile.sh` reports it (`validate_system`). Always confirm with that, not the +vendor-scoped loop. ## Alias shadowing -A printer-specific filament in either the library or a vendor bundle supersedes the library fallback -on the printers it lists. The matching key is the **alias**: the preset name up to the **first** `@`, -right-trimmed (no `@` → the whole name). So -`QIDI ABS-GF@Q2-Series` aliases to `QIDI ABS-GF`. +A printer-specific filament in either the library or a vendor bundle supersedes the library fallback on +the printers it lists. The matching key is the **alias**: the preset name up to the **first** `@`, +right-trimmed (no `@` → the whole name). So `QIDI ABS-GF@Q2-Series` aliases to `QIDI ABS-GF`. -A library preset with an empty `compatible_printers` collects, into `m_excluded_from`, every printer named -by any same-alias preset that *has* a non-empty list, and is then hidden on those printers. +A library preset with an empty `compatible_printers` is hidden on every printer that a same-alias preset +lists in a non-empty `compatible_printers`, whether that preset is in the library or in a vendor bundle +(a printer matches by its own name or its parent's). Two consequences: -- **Only an unrestricted library fallback can be shadowed.** Two printer-specific presets sharing - an alias do not exclude each other — overlapping lists for the same product trip the - duplicate-`filament_id` check instead. -- This is why adding `Generic PLA @` to a vendor silently removes the library `Generic PLA` - from that printer. Intended — and the reason a vendor tuning a generic must **keep the `Generic X` - base name**. +- **Only an unrestricted library fallback can be shadowed.** Two printer-specific presets sharing an + alias do not hide each other; overlapping lists for the same product trip the ambiguous-match error + above instead. +- This is why adding `Generic PLA @` to a vendor silently removes the library + `Generic PLA @System` from that printer. That is intended, and the reason a vendor tuning a generic + must **keep the `Generic X` alias**. -The literal spelling `Generic @System` is load-bearing beyond shadowing: `find_preset2` rewrites an -unresolved name containing "Generic" into that form and retries against the library, which is how 3MF -and project recovery works. +The literal spelling `Generic @System` is load-bearing beyond shadowing: when a user preset, an +imported preset or a 3MF project names a parent that no longer resolves and contains `Generic`, the +loader rewrites the name into `Generic @System` and retries. Only the library ships those names, +so keep them. ## `filament_id`, `filament_vendor`, `filament_type` -`filament_id` is minted from the triple `(filament_vendor, filament_type, name-before-first-@)`. -`filament_vendor` and `filament_type` are therefore **identity, not decoration** — editing either -re-mints the id. Read `docs/HLSD/filament_id.md` before changing any of them, and see -[ids.md](ids.md) for the tooling. +`filament_id` is minted from the triple `(filament_vendor, filament_type, alias)`. `filament_vendor` and +`filament_type` are therefore **identity, not decoration**: editing either, or the alias, re-mints the +id. Read `docs/HLSD/filament_id.md` before changing any of them, and see [ids.md](ids.md) for the +tooling. -A filament with no resolvable `filament_id` anywhere in its `inherits` chain is a **hard load error** that -discards the vendor bundle. The id inherits across bundles, so a vendor's `Generic ABS @X` inheriting -`Generic ABS @System` gets the library's id for free; a vendor's own product must resolve its own. +A filament with no resolvable `filament_id` anywhere in its `inherits` chain is a **hard load error** +that discards the vendor bundle. The id inherits across bundles, so a vendor's `Generic ABS @X` +inheriting `Generic ABS @System` gets the library's id for free; a vendor's own product must resolve its +own. -- `filament_type` **must be a JSON array** — the one vector key the Python check enforces. A scalar - `"PP"` once hung the filament/printer selection UI. +- `filament_type` **must be a JSON array**: the one vector key `check` rejects as a scalar outright. A + scalar `"PP"` once hung the filament and printer selection UI. - It is an **open** enum: an unlisted value is accepted silently and falls back to 190–300 °C defaults - and adhesion 1.0. Off-list values do ship. Prefer a value from `MaterialType::all()` in + and adhesion 1.0. Prefer a value from `MaterialType::all()` in `src/libslic3r/MaterialType.cpp`, or add a row there. - Generics use `filament_vendor: ["Generic"]`, which `fdm_filament_common` already defaults to. ## `"nil"` -Legal in any key whose `ConfigOptionDef` is `nullable`. In a filament preset that is most of the -`filament_*` family, plus `long_retractions_when_ec` and `retraction_distances_when_ec`. About half are -the extruder overrides (`filament_retraction_length`, `filament_z_hop`, `filament_wipe`, -`filament_retract_*`, `filament_retraction_speed`, `filament_deretraction_speed`, -`filament_retraction_minimum_travel`, `filament_wipe_distance`, `filament_long_retractions_when_cut`, -`filament_retraction_distances_when_cut`, …), where `nil` means *keep the printer/extruder's own value*. -The rest are ordinary nullable options (`filament_flow_ratio`, `filament_flush_temp`, -`filament_adaptive_volumetric_speed`, …) where it means *unset*. +`"nil"` is legal only in an option defined as nullable (`add_nullable`, or `nullable = true`, in +`src/libslic3r/PrintConfig.cpp`). Anywhere else it fails the file, and with it the **whole bundle** +(`Failed loading configuration file`, after `Deserializing nil into a non-nullable object` or +`Invalid value provided for parameter : nil`). To leave a non-nullable key unset, omit it; do not +write `nil`. -Anywhere else it throws `Deserializing nil into a non-nullable object`. To not set a non-nullable key, -omit it — do not write `nil`. +In filament presets a minority of the `filament_*` keys are nullable, plus `long_retractions_when_ec` +and `retraction_distances_when_ec`. About half of them are the extruder overrides (`filament_retraction_length`, +`filament_z_hop`, `filament_wipe`, `filament_retract_*`, `filament_retraction_speed`, +`filament_deretraction_speed`, `filament_retraction_minimum_travel`, `filament_wipe_distance`, +`filament_long_retractions_when_cut`, `filament_retraction_distances_when_cut`, …), where `nil` means +*keep the printer's or extruder's own value*. The rest are ordinary nullable options +(`filament_flow_ratio`, `filament_flush_temp`, `filament_adaptive_volumetric_speed`, …), where it means +*unset*. Check the option's definition before writing `nil` anywhere else. -## What to review per nozzle +## Tuning per nozzle and per variant -Across `@X` / `@X 0.N nozzle` sibling pairs the keys that differ, most often first, are +Between a product's `@X` and `@X 0.N nozzle` tunes the keys that usually differ, most often first, are `filament_max_volumetric_speed`, `filament_retraction_length`, `slow_down_min_speed`, -`filament_flow_ratio`, `slow_down_layer_time`, `nozzle_temperature` and `pressure_advance`. -`filament_cost`, `filament_density`, `filament_type` and `filament_vendor` belong on the `@base` and -should not appear in a printer tune. +`filament_flow_ratio`, `slow_down_layer_time`, `nozzle_temperature` and `pressure_advance` (switched on +by `enable_pressure_advance`). Use measured values for the material, hotend, extruder and nozzle combination. Neither maximum -volumetric speed nor pressure advance has a universal nozzle-only lookup table. When cloning a -0.4 preset for a 0.2 nozzle, explicitly revisit flow limits; do not infer a pressure-advance value -or a required direction of change from diameter alone. +volumetric speed nor pressure advance has a universal nozzle-only lookup table. When cloning a 0.4 +preset for a 0.2 nozzle, explicitly revisit flow limits; do not infer a pressure-advance value, or a +required direction of change, from diameter alone. -## Style - -Overrides, not full copies: a typical instantiated filament preset carries around a dozen non-meta keys, -and a library leaf two or three. Presets that restate fifty-plus keys from their parent do still ship — -Phrozen's single filament preset is that style — but they are the pattern to move away from, not to -copy. Commit `6943b6ddc3` is the stated model (flip true bases to `instantiation: "false"`, strip -`compatible_printers`/`setting_id`/`filament_settings_id`, add `renamed_from` on the survivor). - -Prefer the library's `fdm_filament_*` bases over a vendor-local copy. Phrozen's local -`fdm_filament_common` has drifted from the library's. - -Canonical key order, written by `orca_profile_tool.py normalize` when it rewrites a file: `type`, `name`, -`renamed_from`, `inherits`, `from`, `setting_id`, `filament_id`, `instantiation`, then everything else in -the order you wrote it. Not enforced — a file that leads with `compatible_printers` passes `check`. - -**Every vector-typed (`co*s`) key must be a JSON array.** Only `filament_type` is an outright error, but -`normalize` silently arrayifies five more (`filament_cost`, `filament_density`, -`temperature_vitrification`, `filament_max_volumetric_speed`, `filament_vendor`) and `check` fails when -it would. Every other vector key is on you — including `filament_start_gcode`, `filament_end_gcode`, -`filament_extruder_variant`, `compatible_printers` and the plate temperatures. +On a printer with extruder variants, a filament tunes these per variant too: +`filament_max_volumetric_speed`, `filament_flow_ratio`, `nozzle_temperature` and the retraction +overrides carry one value per variant of `filament_extruder_variant` (Standard, High Flow, …). The +exact key set is [`filament_options_with_variant`](extruder-variants.md#the-four-key-sets); +`slow_down_min_speed` and `pressure_advance` are not in it. Keep every such array at exactly that width, even where the +setting does not differ per variant, and measure the High Flow variant rather than copying Standard +([extruder-variants.md](extruder-variants.md#filament)). ## Bed temperature is twelve keys, not one -There is no single "bed temperature". Which plate key applies depends on `curr_bed_type`, whose six -selectable values (`btPC`, `btEP`, `btPEI`, `btPTE`, `btPCT`, `btSuperTack`; `btDefault` maps to no key) -`get_bed_temp_key()` turns into `cool_plate_temp`, `eng_plate_temp`, `hot_plate_temp`, -`textured_plate_temp`, `textured_cool_plate_temp` and `supertack_plate_temp` — each with an -`*_initial_layer` twin. +There is no single "bed temperature". The plate type selected for the printer (`Cool Plate`, +`Engineering Plate`, `High Temp Plate`, `Textured PEI Plate`, `Textured Cool Plate`, `Supertack Plate`) +picks one of six keys, each with an `_initial_layer` twin: `cool_plate_temp`, `eng_plate_temp`, +`hot_plate_temp`, `textured_plate_temp`, `textured_cool_plate_temp` and `supertack_plate_temp`. -`textured_cool_plate_temp` is the one most often forgotten. A printer with `support_multi_bed_types` off -hides the selector, and the printer preset's -`default_bed_type` decides which plate is selected for it, but `curr_bed_type` can still hold a stale -value carried over from another printer — so set every plate the printer plausibly has, as the sibling -presets in the bundle do. +`textured_cool_plate_temp` is the one most often forgotten. A non-BBL printer with +`support_multi_bed_types` off hides the plate selector and uses the printer preset's `default_bed_type` +(High Temp Plate, `hot_plate_temp`, when unset or invalid), but a loaded project or a CLI config can +still carry another plate. So set every plate the printer plausibly has, as the sibling presets in the +bundle do. + +## Style + +- Overrides, not full copies: an instantiated filament preset carries around a dozen non-meta keys, + and a library `@System` shim two or three. A preset that restates fifty-plus keys from its parent is + the pattern to move away from, not to copy. Commit `6943b6ddc3` is the stated model for converting such presets: flip true + bases to `instantiation: "false"`, strip their `compatible_printers`, `setting_id` and + `filament_settings_id`, and add `renamed_from` on the surviving selectable preset. A value every + printer tune of a product shares goes on the product's `@base` + ([shared bases](shared-bases.md#levels)). +- Prefer the library's `fdm_filament_*` bases over a vendor-local copy; for a new preset, even in a + bundle whose older presets use one: a local copy drifts from the library's. +- Canonical key order, written by `orca_profile_tool.py normalize` when it rewrites a file: `type`, + `name`, `renamed_from`, `inherits`, `from`, `setting_id`, `filament_id`, `instantiation`, then + everything else in the order you wrote it. Not enforced on its own: a file that leads with + `compatible_printers` passes `check`. +- **Every vector-typed (`co…s`) key must be a JSON array.** Only a scalar `filament_type` is an outright + error; `normalize` silently arrayifies five more (`filament_cost`, `filament_density`, + `temperature_vitrification`, `filament_max_volumetric_speed`, `filament_vendor`), and `check` fails + when it would. Every other vector key is on you, including `filament_start_gcode`, + `filament_end_gcode`, `filament_extruder_variant`, `compatible_printers` and the plate temperatures. diff --git a/.claude/skills/orca-profiles/references/ids.md b/.claude/skills/orca-profiles/references/ids.md index b6a09e9a2f..214a3d719c 100644 --- a/.claude/skills/orca-profiles/references/ids.md +++ b/.claude/skills/orca-profiles/references/ids.md @@ -1,76 +1,78 @@ # `setting_id` and `filament_id` Orca-generated ids are deterministic hashes of identity. **Never invent an id or copy a sibling's -`setting_id`.** Use `scripts/orca_profile_tool.py`; the two special cases are +`setting_id`.** +Use `scripts/orca_profile_tool.py`; the two special cases are [a wrongly inherited filament id](#what-generate-id-does-and-does-not-fix) and [BBL's authoritative setting ids](#bbls-exception-precisely). -`docs/HLSD/filament_id.md` is the authoritative design document for `filament_id` — the id landscape, the -checks CI runs, and the Bambu catalog map. This page is the tooling half. +`docs/HLSD/filament_id.md` is the authoritative design document for `filament_id`: the id landscape, +the checks CI runs, and the Bambu catalog map. This page is the tooling half. | | `setting_id` | `filament_id` | | --- | --- | --- | | Identifies | one selectable preset | one filament **product** | -| Key hashed | `//` | `filament_product///` | -| Shape | 16 base62 chars | `OF` + 6 base62 chars | +| Key hashed | `//` | `filament_product///`, using the resolved (inherited) first values and the name up to the first `@`, right-trimmed | +| Shape | 16 base62 characters | `OF` + 6 base62 characters | | Required on | every `instantiation: "true"` preset | every **instantiated** filament, own or inherited | -| Forbidden on | bases (`instantiation != "true"`) | — (a base is exactly where it belongs) | -| Scope | globally unique across the tree | shared by every variant of the product, in every bundle | +| Forbidden on | bases (`instantiation` not `"true"`) | — (a product's root base is exactly where it belongs) | +| Scope | unique across the whole tree | shared by every preset of the product, in every bundle | -`` is `machine` / `process` / `filament` — the vendor is the **folder** name (`BBL`), not the -display name (`Bambulab`). Renaming a preset changes its `setting_id`; renaming a filament, or editing -its `filament_vendor` or `filament_type`, also changes its `filament_id`. +`` is `machine`, `process` or `filament`, and the vendor is the **folder** name (`BBL`), not the +display name (`Bambulab`). Renaming a preset changes its `setting_id`; renaming a filament's alias, or +editing its `filament_vendor` or `filament_type`, also changes its `filament_id`, and the old id is not +forwarded. ## The tool -Use `scripts/orca_profile_tool.py` with a subcommand: +`scripts/orca_profile_tool.py` takes a subcommand: | Command | Does | | --- | --- | -| `check` | everything CI's `profile_tool` step runs — see [validation.md](validation.md) | +| `check` | everything CI's `profile_tool` step runs; see [validation.md](validation.md#orca_profile_toolpy-check) | | `generate-id` | writes `setting_id` and `filament_id` | | `normalize` | rewrites profile files into their canonical shape | -| `trim` | deletes profile files no `.json` list references | +| `trim` | deletes profile files no `.json` list references | | `update-index` | rebuilds the `*_list` sections from the files on disk | -The order after adding, renaming or deleting files — each step feeds the next, so it is not -interchangeable — is `normalize` → `update-index` → `generate-id` → `check`. -The [authoring workflow](../SKILL.md#creating-or-modifying-a-profile) has the commands. +The order after adding, renaming or deleting files is `normalize` → `update-index` → `generate-id` → +`check`. Each step feeds the next, so it is not interchangeable. The +[authoring workflow](../SKILL.md#creating-or-modifying-a-profile) has the commands. -> **`trim` deletes.** It removes every profile file the index does not list — including the one you just -> added and have not registered yet. Register first, or skip `trim` entirely; it is a cleanup sweep, not +> **`trim` deletes.** It removes every profile file the index does not list, including the one you just +> added and have not registered yet. Register first, or skip `trim` entirely: it is a cleanup sweep, not > part of landing a profile. Preview with `--dry-run`. **Register, then mint.** The `filament_id` pass reads `.json`'s `filament_list`, not the filesystem (the `setting_id` pass walks the filesystem, so a bundle whose index has not landed yet is -still assignable). A new filament file is therefore invisible to `generate-id`'s filament_id pass until -it is registered — its `setting_id` is written regardless. +still assignable). A new filament file is therefore invisible to `generate-id`'s `filament_id` pass +until it is registered; its `setting_id` is written regardless. -- `--dry-run` works on every writing command (`generate-id`, `normalize`, `trim`, `update-index`) - and writes nothing. -- `--filament-id` / `--setting-id` narrow `generate-id`; they exclude each other, and passing neither - writes both. -- `--vendor` is repeatable and narrows **only what is written** — the id is a function of the triple +- `--dry-run` works on every writing command (`generate-id`, `normalize`, `trim`, `update-index`) and + writes nothing. +- `--filament-id` / `--setting-id` narrow `generate-id` to one pass; they exclude each other, and + passing neither writes both. +- `--vendor` is repeatable and narrows **only what is written**: an id is a function of its own key alone, so a narrowed run writes exactly what a full run would. An unknown vendor exits 1 before any write. `--vendor` on `check` narrows the per-vendor checks only; the `setting_id` and `filament_id` passes stay tree-wide. -- `--profiles DIR` points any command at another tree — see +- `--profiles DIR` points any command at another tree; see [Checking a copy of the tree](validation.md#checking-a-copy-of-the-tree). - `--profile-type` narrows `normalize`, `trim` and `update-index` to `machine_model`, `process`, `filament` or `machine`. - Exit codes: 0 clean, 1 errors found (`generate-id` still writes what it could), 2 argparse misuse. - Output is ANSI-coloured; searching for the literal `[ERROR]` still works. -`generate-id` is **idempotent and byte-preserving** — BOM and CRLF kept, one key line touched per pass. -A legitimate `generate-id` diff is one or two changed lines per file: a new instantiated filament gets -both a `filament_id` and a `setting_id`, and a BBL file with a misspelled `settings_id` has that line -dropped and its value restored under the right key. `normalize` is the opposite by design — it rewrites -whole files into canonical shape — which is why `check` demands it already be a no-op. Some bundles have -CRLF committed (OrcaFilamentLibrary, Anycubic and RH3D among them), so a `normalize` pass there rewrites -every line — read the diff before committing it. +`generate-id` is **idempotent and byte-preserving**: BOM and CRLF are kept, and each pass touches only +its one key line. A legitimate `generate-id` diff is one or two changed lines per file: a new instantiated +filament gets both a `filament_id` and a `setting_id`. `normalize` is the opposite by design (it +rewrites whole files into canonical shape), which is why `check` demands it already be a no-op. A file +committed with CRLF line endings changes on every line under `normalize`; read the diff before +committing it. -On a clean tree `check` and `generate-id --dry-run` both exit 0 with zero findings. That is the -baseline to restore before opening a PR. +Exit 1 from `generate-id` does not mean nothing was written: it writes every id it can and reports the +rest, so read the diff before rerunning. On a clean tree `check` and `generate-id --dry-run` both exit 0 +with zero findings; that is the baseline to restore before opening a PR. ## What `generate-id` does and does not fix @@ -78,35 +80,37 @@ Writes: - a `setting_id` into any instantiated preset that lacks one, or whose value does not match the formula; - strips a `setting_id` from a base; -- deletes the misspelled `settings_id` key; +- deletes the misspelled key `settings_id`, moving its value to `setting_id` only on an instantiated BBL + preset that lacks one (everywhere else the old value is discarded and a fresh id minted); - a `filament_id` into the id-less **root(s)** of an instantiated filament that resolves none; - rewrites a **declared** `filament_id` that is not the mint of its own triple. Refuses to write (reports only): a base62 collision between two products, an empty `filament_vendor` or -`filament_type`, a broken `inherits` chain, roots of one filament resolving divergent `(vendor, type)` -pairs. +`filament_type`, a broken `inherits` chain, and roots of one filament resolving different +`(filament_vendor, filament_type)` pairs. -**Does not fix: a preset that *inherits* a wrong `filament_id`.** This is check 2b, and it is the trap -most likely to bite. It happens when a branded filament inherits a generic for its settings: +**Does not fix: a preset that *inherits* a wrong `filament_id`.** This is check 2b (the label `docs/HLSD/filament_id.md` and the tool use), and it is the trap most likely to bite. +It happens when a branded filament inherits a generic for its settings: ```jsonc { "name": "Phrozen Aura PETG @Phrozen Arco 0.4 nozzle", - "inherits": "Generic PETG @System" } // resolves the OFL generic's id — wrong product + "inherits": "Generic PETG @System" } // resolves the library generic's id: wrong product ``` -The preset resolves *an* id, so `generate-id` neither inserts nor rewrites, and `check` fails with +The preset resolves *an* id, so `generate-id` neither inserts nor rewrites one, and `check` fails with `inherits filament_id "X" but its own triple "V/T/N" mints "Y"`. Two fixes, in order of preference: 1. **Give the product a `@base` root** inheriting a material base (`fdm_filament_pet`, - `fdm_filament_pla`, …). No `fdm_filament_*` base carries a `filament_id`, so the filament now resolves - none and `generate-id` mints it for you. This is also the shape the rest of the tree uses. -2. **Declare the tool-computed key on the preset itself.** Use the expected value reported by `check` - or compute it with the function below; this is not a manually chosen id. Make sure the preset - resolves the right `filament_vendor` and `filament_type` first — with - neither set, the triple resolves through the generic parent and the branded product is minted - under vendor `Generic`. If you need the id before the file exists: + `fdm_filament_pla`, …) with its own `filament_vendor` and `filament_type`. No `fdm_filament_*` base + carries a `filament_id`, so the filament now resolves none and `generate-id` mints it on the root. + This is the product-root shape ([the three-part shape](filament-profiles.md#the-three-part-shape)). +2. **Declare the tool-computed id on the preset itself.** Use the expected value `check` reports, or + compute it with the function below; this is not a manually chosen id. First make sure the preset + resolves the right `filament_vendor` and `filament_type`: with neither set, the triple resolves + through the generic parent and the branded product is minted under vendor `Generic`. If you need the + id before the file exists: ```bash python3 -c "import sys; sys.path.insert(0,'scripts'); from orca_profile_tool import generate_filament_id as g; print(g('Polymaker','PLA','PolyLite PLA'))" @@ -114,36 +118,39 @@ Two fixes, in order of preference: ``` The quoting works unchanged in cmd and PowerShell; only swap `python3` for `py -3`. + `generate_preset_setting_id('', '', '')` is the `setting_id` equivalent. - The `setting_id` equivalent is `generate_preset_setting_id('', '', '')`. +A vendor's tune of a generic that keeps the `Generic X` alias is not this case: inheriting the +generic's id is correct there, because the product really is the library generic +([filament-profiles.md](filament-profiles.md#the-two-most-common-contributions)). ## BBL's exception, precisely -`RESERVED_VENDORS = {"BBL"}` covers **`setting_id` assignment only**, keyed on the *folder* name: +The exception covers **`setting_id` assignment only**, keyed on the *folder* name `BBL`: -- The tool never mints or replaces a BBL `setting_id`. A new instantiated BBL preset with no - `setting_id` therefore **cannot be fixed by the tool**, yet the presence rule still applies to it — - carry over Bambu's authoritative id by hand. +- The tool never mints or replaces a `setting_id` in `BBL/`: those are Bambu's own ids. A new + instantiated BBL preset with no `setting_id` therefore **cannot be fixed by the tool**, yet the + presence rule still applies to it: carry over Bambu's authoritative id by hand. - BBL is not exempt from anything else: bases still get their `setting_id` stripped, ids must still be - globally unique, and BBL `filament_id`s are minted like everyone else's — every one of them is an - `OF*`. + unique across the tree, and BBL `filament_id`s are minted like everyone else's, as `OF…` ids. ## Ids other systems compose -No id from another system is the mint of a triple, so `check` rejects it like any other bad id — same -error, same remedy, whoever wrote it. Three such spaces exist near the tree; recognise them so you do -not copy one into a profile: +No id from another system is the mint of a triple, so `check` rejects one used as a `filament_id` like +any other bad id: same error, same remedy, whoever wrote it. Three such spaces exist near the tree; +recognise them so you do not copy one into a profile: -- **Bambu's `GF*` catalog** — external and opaque, correlated to Orca's ids by the generated - `resources/printers/bambu_filament_ids.json`. `GF` is a *prefix*, not a spelling the tree avoids: most - BBL `setting_id`s start with `G`, and `blacklist.json` and - `BBL/filament/filaments_color_codes.json` both reference Bambu catalog ids by design. The rule is - about `filament_id` and nothing else. -- **Qidi's `QD_*`** — composed at runtime by the box (`QD___`), not a preset id. -- **`P` + 7 hex, and `"null"`** — what `CreatePresetsDialog.cpp` gives a *user*-created filament. +- **Bambu's `GF…` catalog**: external and opaque, correlated to Orca's ids by the generated + `resources/printers/bambu_filament_ids.json`. `blacklist.json` and + `BBL/filament/filaments_color_codes.json` reference Bambu catalog ids by design. The rule is about + `filament_id` and nothing else: every BBL `setting_id` starts with `G`, and that is Bambu's own + preset id, not a leaked catalog id. +- **Qidi's `QD_…`**: composed at runtime by the printer's filament box + (`QD___`), not a preset id. +- **`P` + 7 hex digits, and `"null"`**: what the app gives a *user*-created filament. ## Tests -`python3 -m unittest discover -s scripts/tests -t scripts` (`py -3 -m …` on Windows). Note the -`-t scripts` argument; without it the imports fail. CI runs them as the first, non-`continue-on-error` -step of the profile job — see [validation.md](validation.md#ci). +`python3 -m unittest discover -s scripts/tests -t scripts` (`py -3 -m …` on Windows) runs the tool's +unit tests. Note the `-t scripts` argument; without it the imports fail. CI runs them as the first, +non-`continue-on-error` step of the profile job; see [validation.md](validation.md#ci). diff --git a/.claude/skills/orca-profiles/references/machine-profiles.md b/.claude/skills/orca-profiles/references/machine-profiles.md index 01071af6b1..de338f14ee 100644 --- a/.claude/skills/orca-profiles/references/machine-profiles.md +++ b/.claude/skills/orca-profiles/references/machine-profiles.md @@ -1,23 +1,23 @@ # Printer models and variants -Both live in `resources/profiles//machine/*.json`; models go in `machine_model_list`, variants -and shared bases in `machine_list`. Every one of them is registered. Some vendors (Elegoo, Eryone, -InfiMech, FlyingBear) nest a further subfolder under `machine/`, so recurse rather than globbing -`machine/*.json`. +Both live in `resources/profiles//machine/`; models go in `machine_model_list`, variants and +shared bases in `machine_list`. Every one of them is registered. A bundle may nest further subfolders +under `machine/`, so recurse rather than globbing `machine/*.json`. -## A `machine_model` is not a config preset +## `machine_model`: a record, not a config preset -It is parsed by a hand-written key switch, and only these keys are stored (`version` and `url` are -matched and discarded): +The loader reads a fixed set of keys from a `machine_model` and stores only these (`version` and `url` +are recognised and discarded): `name`, `model_id`, `nozzle_diameter`, `machine_tech`, `family`, `bed_model`, `bed_texture`, `hotend_model`, `default_materials`, `not_support_bed_type`, `image_bed_type`, `bottom_texture_end_name`, `bottom_texture_rect`, `bottom_texture_rect_longer`, `middle_texture_rect`, `use_double_extruder_default_texture`. -**Everything else is silently dropped.** Only `name` and `nozzle_diameter` are required. Dead keys ship -on real models today — `url`, `default_bed_type`, even a `desciption` typo — so a neighbour carrying a -key is no evidence it does anything. Printer config options belong on the `machine` preset, never here. +**Everything else is silently dropped**, a printer config key such as `default_bed_type` or a +misspelling included, so a neighbour carrying a key is no evidence it does anything. Printer config options belong on the `machine` preset, never here. The loader drops a model +silently if its index entry has no name or its `nozzle_diameter` yields no sizes; `check` also requires +the file's own `name`. ```json { @@ -36,28 +36,28 @@ key is no evidence it does anything. Printer config options belong on the `machi | Field | Notes | | --- | --- | -| identity | **the `name` of the `machine_model_list` entry**, which is what a variant's `printer_model` must equal. `check_name_consistency` forces it to equal the file's `name`, so they coincide. | -| `model_id` | a *separate* cloud/device printer type. Optional, and not required to be unique. Not the model's identity. Changing it changes device matching. | -| `machine_tech` | only `starts_with("SL")` means SLA; everything else is FFF. Write `FFF`; a few models write `FGF`, which is a label with no effect. | -| `nozzle_diameter` | `;`-separated string, one token per available size. Order is free (Qidi writes `0.4;0.2;0.6;0.8` to put the default first). This list is the authoritative set of legal `printer_variant` values. | -| `default_materials` | `;`-separated filament **preset names**. Used to preselect in the wizard *and* by `PresetBundle::load_installed_filaments` to auto-install a printer's filaments on first run, so a dangling entry costs a real user a filament. Not `,`; case-sensitive (`@System`). `check` fails on a dangling name here or in `default_filament_profile`. | +| identity | **the `name` of the `machine_model_list` entry**, which is what a variant's `printer_model` must equal. `check` forces it to equal the file's `name`, so they coincide. | +| `model_id` | a *separate* cloud/device printer type. Optional, and not required to be unique. Not the model's identity; changing it changes device matching. | +| `machine_tech` | only a value starting with `SL` means SLA; everything else is FFF. Write `FFF`; `FGF` behaves as FFF. | +| `nozzle_diameter` | `;`-separated string, one token per available size. Order is free (`0.4;0.2;0.6;0.8` puts the default first). This list is the authoritative set of legal `printer_variant` values. | +| `default_materials` | `;`-separated filament **preset names**, not `,`; case-sensitive (`@System`); order is ignored. Used to preselect filaments in the setup wizard *and* to install a printer's filaments on first run, so a dangling entry costs a real user a filament. Every name must exist (`check` fails on a name matching no filament file, here or in `default_filament_profile`), and every variant of the model needs at least one entry compatible with it (`validate_system`). | | `family` | a wizard grouping label only; give every model one. | ### Assets -`bed_model`, `bed_texture` and `hotend_model` are paths relative to the **vendor folder** (by id). -Majority convention: `_buildplate_model.stl` and `_buildplate_texture.svg`. An empty string -is the legal "none", and is the norm for `hotend_model`. +`bed_model`, `bed_texture` and `hotend_model` are paths relative to the **vendor folder** (named by the +vendor id). Convention: `_buildplate_model.stl` and `_buildplate_texture.svg`. An +empty string is the legal "none", and is the norm for `hotend_model`. -**Nothing checks that the file exists.** A missing `hotend_model` falls back to -`resources/profiles/hotend.stl`; a missing `bed_model`/`bed_texture` just renders nothing. Broken -references already ship. Verify by hand. +**Nothing checks that the files exist.** A missing `hotend_model` falls back to +`resources/profiles/hotend.stl`; a missing `bed_model` makes the bed render as a generic custom bed, and a missing +`bed_texture` renders no texture. +Verify by hand, in exact case. -Every model also has a `_cover.png` in the vendor folder — treat it as required, not optional. -240×240 is the cap `scripts/optimize_cover_images.py` enforces and the size most covers already use. -A missing cover degrades to a placeholder in both the wizard and the sidebar. +Every model also has a `_cover.png` in the vendor folder; treat it as required, not optional. +240×240 is the cap `scripts/optimize_cover_images.py` enforces. A missing cover degrades to a placeholder in both the wizard and the sidebar. -## The `machine` variant +## `machine`: the variant ```json { @@ -79,116 +79,154 @@ A missing cover degrades to a placeholder in both the wizard and the sidebar. Minimum viable key set: `type`, `name`, `from`, `instantiation`, `setting_id`, `inherits`, `printer_model`, `printer_variant`, `nozzle_diameter`, `printable_area`, `printable_height`, -`default_print_profile`. The four keys without which the preset will not load at all are `name`, -`instantiation`, `printer_model` and `printer_variant`; `default_filament_profile` is an array -(`["Generic PLA @System"]`) and the model's `default_materials` a `;`-separated string. Unlike a -`machine_model`, a `machine` **is** config-loaded, so a key belonging to another preset type is a -reported error (a misspelled key is still silent). +`default_print_profile`. `default_filament_profile` is optional; when written it +is an array (`["Generic PLA @System"]`), while the model's `default_materials` is a `;`-separated +string. Unlike a `machine_model`, a `machine` **is** a config preset, so a key belonging to another +preset type is a reported error and is removed; a misspelled key is still dropped silently. -### `printer_variant` — three hard rules +### `printer_model` and `printer_variant` -1. Non-empty, and an exact member of the model's `;`-separated `nozzle_diameter` list. -2. `printer_model` non-empty and naming a model of this vendor. -3. In validation mode, for instantiated presets only: split `printer_variant` on `+`, each token must - start with a number (a trailing non-numeric suffix such as `HF` is ignored), and the resulting **set** - must equal `set(nozzle_diameter)`. +1. `printer_model` is non-empty and names a model of this bundle exactly. +2. `printer_variant` is non-empty and an exact token of that model's `;`-separated `nozzle_diameter` + list. +3. For instantiated presets, when validating: split `printer_variant` on `+`; each token must start + with a number (a trailing non-numeric suffix such as `HF` is ignored), and the resulting **set** must + equal the set of `nozzle_diameter` values. -Rules 1 and 2 are loader-enforced — failing either drops the preset *and* the whole bundle. Rule 3 only -raises a validation error: the preset still loads, but the validator exits non-zero. +Rules 1 and 2 are loader-enforced: failing either discards the whole bundle. Rule 3 only raises a +validation error: the preset still loads, but the validator exits non-zero. -`nozzle_diameter` lists one entry **per physical nozzle**; `printer_variant` lists the **distinct** -diameters joined with `+`. Snapmaker U1 is the worked case: `["0.4","0.4","0.6","0.6"]` against -`"0.4+0.6"` — it passes because the comparison is on sets. +`nozzle_diameter` lists one entry **per extruder**; `printer_variant` lists the **distinct** diameters +joined with `+`: `["0.4","0.4","0.6","0.6"]` against `"0.4+0.6"` passes because the comparison is on +sets. -The conventional values are `0.2`, `0.25`, `0.4`, `0.5`, `0.6`, `0.8` and `1.0`. Suffixed forms -(`0.4HF`, `0.6HF`, `0.8HF`, `0.4HS`) are Flashforge-only and the `+` form is rare. A variant is **not** -required to be unique within a model — Volumic ships `EXO42 IDRE`, `… COPY MODE` and `… MIRROR MODE` all -at `0.4` under the one model `EXO42 IDRE`. +Write `printer_variant` as a bare diameter matching the model's list, with no unit. The conventional +values are `0.2`, `0.25`, `0.4`, `0.5`, `0.6`, `0.8` and `1.0`; a suffixed form (`0.4HF`, `0.4HS`) or +the `+` form is legal under rule 3. A `printer_variant` is **not** required to be unique within a +model: an IDEX model's normal, `COPY MODE` and `MIRROR MODE` presets can all be `0.4`. The converse is **unchecked**: a nozzle size in the model's list with no matching variant is offered in -the wizard and resolves to nothing. `Wanhao France`'s `D12 500 PRO M2 DIRECT` ships that bug today. +the wizard and resolves to nothing. A variant whose `printer_model` names a sibling model by mistake +leaves its own model's size in exactly that state. -### Other fields worth knowing +### Other keys -- `default_print_profile` is a **scalar**, matched by exact preset name. Not a `;` list. The named +- `default_print_profile` is a **scalar**, matched by exact preset name; not a `;` list. The named process must be compatible with this printer through its resolved list or condition. `validate_slice` attempts to select it and rejects generic Default fallbacks, but compatibility - updates can choose another compatible preset. Check the exact default reference yourself. -- `default_filament_profile` is an **array**, one name per element. -- `printable_area` is an array of `"XxY"` strings — four points for a rectangle, one per segment for a - delta or circular bed. -- `gcode_flavor` is usually set once in the base; `klipper`, `marlin`, `marlin2` and `reprapfirmware` - cover nearly every shipped printer. -- `printer_settings_id` is junk — most files carrying it disagree with their own name. Do not copy it - when cloning a bundle. -- `min_layer_height` / `max_layer_height` are **machine** keys (per extruder), never process keys. + updates can choose another compatible preset, and `check` does not resolve the name. Check the exact + default reference yourself. +- `default_filament_profile` is an **array**, one name per element. Entry 0 is the filament preselected + when the printer is chosen; entry *i* is the preferred replacement when filament *i* is incompatible, + and any listed name outranks an unlisted one. The validator checks every entry. The list of a + printer's filaments is the model's `default_materials`: a new filament goes into `default_materials`; + put it first in `default_filament_profile` only if it should become the preselected one. +- `printable_area` is an array of `"XxY"` strings: four points for a rectangle; a delta or other circular bed + is a polygon with one point per segment. +- A non-BBL printer shows the plate selector only with `support_multi_bed_types` `"1"`; otherwise it + uses its `default_bed_type` (a plate name such as `"Textured PEI Plate"`; High Temp Plate when unset). + Filaments still set every plate + ([twelve keys](filament-profiles.md#bed-temperature-is-twelve-keys-not-one)). +- `gcode_flavor` is usually set once in the base; the common values are `klipper`, `marlin`, `marlin2` + and `reprapfirmware`. +- `printer_settings_id` does nothing in a preset file: the app replaces it with the selected preset's + name before slicing. Omit it, and do not copy it when cloning a bundle. +- `min_layer_height` / `max_layer_height` are **machine** keys (one per extruder), never process keys. ## Bases -Nearly every machine-bearing vendor registers a base literally named `fdm_machine_common`, and Klipper -vendors add `fdm_klipper_common` on top of it. Two levels is the usual depth. +The conventional machine root is a base named `fdm_machine_common`, with `fdm_klipper_common` on top +of it for Klipper printers. Which values a hardware +family or model base holds, and when adding one pays off, is in [shared-bases.md](shared-bases.md). **There is no leading-underscore convention for bases.** ## Adding a printer to an existing bundle -1. Choose the names first — model, variant(s), process(es); everything else references them. +1. Choose the names first: model, variant(s), process(es); everything else references them + ([naming.md](naming.md)). 2. Add the model (`machine_model_list`) and one `machine` variant per nozzle; the minimum key sets are above. Bed assets and `_cover.png` go directly in `/`. 3. Add at least one process per variant naming it in `compatible_printers` ([process-profiles.md](process-profiles.md#adding-a-quality-tier-or-a-nozzles-processes)). -4. Register everything (or run `update-index`), bump the version, run the id tool, validate. +4. Add the variants to the filaments they should offer, and set the model's `default_materials` so every + variant has a compatible entry. +5. Register everything (`update-index`), bump the version, run the id tool, validate: the + [authoring workflow](../SKILL.md#creating-or-modifying-a-profile). ## Adding a nozzle variant 1. Extend the model's `nozzle_diameter` (`"0.4"` → `"0.4;0.6"`). -2. Add the variant preset. Either inherit the shared base (the usual choice) or the 0.4 sibling (Elegoo, - BBL, Prusa and Qidi do this — smaller diff, but the sibling's edits now reach this file too). -3. Override what actually changes with nozzle: `nozzle_diameter`, `printer_variant`, - `default_print_profile`, `default_filament_profile`, `min_layer_height`/`max_layer_height`, and +2. Add the variant preset. Either inherit the shared base (the usual choice), or the 0.4 sibling + (a smaller diff, but the sibling's edits now reach this file too). Follow the bundle. +3. Override what actually changes with the nozzle: `nozzle_diameter`, `printer_variant`, + `default_print_profile`, `default_filament_profile`, `min_layer_height` / `max_layer_height`, and retraction if the vendor tunes it. -4. Add at least one process for the new nozzle — see [process-profiles.md](process-profiles.md). +4. Add at least one process for the new nozzle (see [process-profiles.md](process-profiles.md)), and + extend the filaments' `compatible_printers` so at least one `default_materials` entry covers the new + variant. 5. Register both, bump the version, run the id tool, validate. -## Multi-extruder, IDEX and tool-changers +## Multi-extruder, IDEX and tool changers -Per-extruder vectors are **silently resized** to the nozzle count, with no error. Padding repeats the -**first** value, not the last — `["0.4","0.6"]` on a 4-nozzle machine becomes `0.4, 0.6, 0.4, 0.4`. -Longer vectors are truncated. +Per-extruder vectors hold one value per extruder (`len(nozzle_diameter)`), and a wrong length raises no +error: a short vector acts as padded with its **first** value, not the last (`extruder_offset` +`["0x0","50x0"]` on a 4-extruder machine reads as `0x0, 50x0, 0x0, 0x0`), and entries beyond the +extruder count are never read. -Note the two sizing families: the plain per-extruder keys (`extruder_offset`, `extruder_colour`, -`extruder_printable_height`, `min_layer_height`, `max_layer_height`, `nozzle_diameter`) are sized to the -extruder count, while `printer_options_with_variant_1` (`retraction_length`, `z_hop`, `wipe`, -`nozzle_type`, the rest of the retraction family) is sized to `printer_extruder_variant` instead. +Note the two sizing families. The plain per-extruder keys (`printer_extruder_options`: `extruder_type`, +`nozzle_diameter`, `default_nozzle_volume_type`, `extruder_printable_height`, `min_layer_height`, +`max_layer_height`, …, given in full with the [key sets](extruder-variants.md#the-four-key-sets), plus +`extruder_offset` and `extruder_colour`) hold one value per extruder. The variant sets +(`retraction_length`, `z_hop`, `wipe`, `nozzle_type`, the `machine_max_*` limits at stride 2; +[the full lists](extruder-variants.md#the-four-key-sets)) are sized to the variant length: +`len(printer_extruder_variant)`, or one variant per extruder when the resolved preset writes no layout, +since `extruder_variant_list` defaults to one `Direct Drive Standard` per extruder +([widths](extruder-variants.md#widths)). `extruders_count` is a printer-tab field, not a preset key; the +loader drops it. - Give **one entry per extruder** for ordinary per-extruder vectors such as `extruder_offset`, - `extruder_colour`, `min_layer_height` and `max_layer_height`; size the variant-dependent family - to `printer_extruder_variant` instead. - A single `["0x0"]` `extruder_offset` on a dual or multi-tool machine — which already ships — pads every - toolhead to the same offset, so the offset never applies. -- Overriding `nozzle_diameter` to a different count without re-stating every per-extruder vector is the - other half of the trap — `Snapmaker U1 (0.4+0.6 nozzle)` inherits 5-entry vectors against 4 nozzles. + `extruder_colour`, `min_layer_height` and `max_layer_height`. Size the variant sets to the variant + length × stride, one value per variant (per extruder when there is no layout; a (normal, silent) + pair for the `machine_max_*` limits), even where the values are the same; the loader keeps only the first value of a list-less printer's variant arrays, so declare + the layout when the extruders differ. A single `["0x0"]` `extruder_offset` on a dual or + multi-extruder machine pads every extruder to the same offset, so the offset never applies. +- Overriding `nozzle_diameter` to a different count without restating every per-extruder vector is the + other half of the trap: a 4-extruder preset on a 5-extruder base inherits 5-entry vectors against 4 + extruders. + The reverse is silent too: a base is stored resized to its own `printer_extruder_variant` (one variant + when it writes none, whatever its extruder count), so a wider variant array on it reaches the children + as its first value padded ([composition](extruder-variants.md#padding-truncation-and-composition)). + `check` does not judge the base on its own; where its extruders need different values, declare the + layout on the base. -Copy targets: `Custom/machine/fdm_toolchanger_common.json` + `Custom/machine/MyToolChanger 0.4 -nozzle.json` (a clean minimal variant on a base that gives every vector five entries), and -`Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json` for IDEX. The BBL extruder-variant machinery -(`extruder_variant_list`, `printer_extruder_id`, `default_nozzle_volume_type`) is used by a handful of -vendors — do not copy it into a new bundle (`nozzle_volume_type` itself is not a machine-preset key). +Structure to copy: `Custom/machine/fdm_toolchanger_common.json` + `Custom/machine/MyToolChanger 0.4 +nozzle.json` (a minimal variant on a base that gives the per-extruder vectors five entries), and +`Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json` for IDEX. Take the structure from them and +the widths from the [sizing equation](extruder-variants.md#sizing-equation). Both are list-less, so +every variant array holds one value per extruder and the loader keeps only the first: fine while every +extruder shares the same retraction and limits. Add the extruder-variant layout +(`extruder_variant_list`, `printer_extruder_variant` / `printer_extruder_id`, +`default_nozzle_volume_type`) when the hardware has swappable nozzle volume types or mixed extruder +types, or as soon as one extruder needs its own value in a variant key; how to author it, and the +matching process and filament variants, is in [extruder-variants.md](extruder-variants.md). +(`nozzle_volume_type` itself is not a machine-preset key.) ## Custom G-code The keys are `machine_start_gcode`, `machine_end_gcode`, `change_filament_gcode`, -`machine_pause_gcode`, `before_layer_change_gcode` and `layer_change_gcode`. Both a single string with -embedded `\n` and a JSON array of lines are legal and both are in use — do not convert one into the -other. Conditionals are `{if …}` / `{elsif …}` / `{else}` / `{endif}`; `{elsif}` is rare but real (Qidi's -`layer_change_gcode` uses it). +`machine_pause_gcode`, `before_layer_change_gcode` and `layer_change_gcode`. Each is one string with +embedded `\n`. Never split G-code into a JSON array of lines: the loader joins array elements with `,` +into a single line (a one-element array is equivalent to the string): a two-element +`machine_start_gcode` becomes one line, `PRINT_START …,SET_PRESSURE_ADVANCE ADVANCE=0.046`. +Conditionals are `{if …}` / `{elsif …}` / `{else}` / `{endif}`. -Placeholder errors only surface when the config is actually expanded, which means `validate_slice`: +Placeholder errors only surface when the G-code is actually expanded, which means `validate_slice`: ```bash ./scripts/check_profile.sh --vendor "" validate_slice # Windows: scripts\check_profile.bat -Vendor "" validate_slice ``` -What the sweep covers is in [validation.md](validation.md#validate_slice); no `CP TOOLCHANGE START` in -the output means `change_filament_gcode` never expanded. +What the sweep covers is in [validation.md](validation.md#validate_slice); a printer whose output has no +`CP TOOLCHANGE START` fails it, because its `change_filament_gcode` never expanded. diff --git a/.claude/skills/orca-profiles/references/naming.md b/.claude/skills/orca-profiles/references/naming.md index 502863f0c4..e2fd5a4d88 100644 --- a/.claude/skills/orca-profiles/references/naming.md +++ b/.claude/skills/orca-profiles/references/naming.md @@ -1,60 +1,94 @@ # Preset naming -A preset's `name` is the loader's key, not decoration. The index registers it; `inherits`, -`compatible_printers` and the `default_*` keys reference it by the exact string; `renamed_from` depends -on it; and `setting_id` / `filament_id` hash it (see [ids.md](ids.md)). Two presets of one type in a -bundle may not share a name (`check_preset_name_uniqueness`). Treat a name change as an identity change, -not a relabel. - -Naming is convention only where the loader does not parse it. What the loader actually acts on: - -| Type | Shape | Acted on | -| --- | --- | --- | -| `machine_model` | `` | the exact string, named by a variant's `printer_model` | -| `machine` | ` nozzle` | the exact string, named by `compatible_printers`; `printer_variant` must equal a nozzle diameter | -| `process` | `mm @` | the exact string when referenced or selected; the `@` half is a label | -| `filament` | ` @` | text before the first `@` is the **alias**, used for shadowing; the rest is a label | +A preset's `name` is its identity, not decoration. The index registers it; `inherits`, +`compatible_printers`, `printer_model` and the `default_*` keys reference it by the exact, +case-sensitive string; `renamed_from` migrates it; `setting_id` and `filament_id` hash it +([ids.md](ids.md)). Treat a name change as an identity change that needs +[migration](vendor-bundle.md#renamed_from), not a relabel. Which part of each name the loader acts on +is the table in [SKILL.md](../SKILL.md#names); this page holds the conventions. ## `machine_model` -`` — the vendor-prefixed model name (`Bambu Lab X1 Carbon`, `Creality K1`, `Prusa CORE One`). A -variant names it verbatim in `printer_model`; a mismatch makes the variant invalid. `check_name_consistency` -forces the index entry to equal the file's `name`, and the variant's `printer_model` targets this string -([A `machine_model` is not a config preset](machine-profiles.md#a-machine_model-is-not-a-config-preset)). -It is also the `_cover.png` and bed-asset stem. +``, vendor-prefixed: `Bambu Lab X1 Carbon`, `Creality K1`, `Prusa CORE One`. Each variant's +`printer_model` names it verbatim (a mismatch discards the bundle), and its index entry equals the +file's `name`. It is also the stem of `_cover.png` and, by convention, of the bed assets +(`_buildplate_model.stl`). ## `machine` (variant) -` nozzle` is near-universal (`Bambu Lab X1 Carbon 0.4 nozzle`). `printer_variant` holds -the bare nozzle (`0.4`) and must be an exact member of the model's `nozzle_diameter` list — the hard -rules are in [The `machine` variant](machine-profiles.md#the-machine-variant). Casing varies -(`nozzle` / `Nozzle`): match the bundle, not this page. A variant that is not nozzle-specific (a special -toolhead, a multi-material build) may drop the suffix — still an exact reference. Bases are named -`fdm_machine_common` / `fdm__common`. +` nozzle` is near-universal (`Bambu Lab X1 Carbon 0.4 nozzle`). Casing varies +(`nozzle` / `Nozzle`): match the bundle, not this page. A variant that is not nozzle-specific (a +special toolhead, a multi-material build, IDEX copy and mirror modes such as +` COPY MODE (0.4 nozzle)`) may drop or reshape the suffix; it is still an exact reference. `printer_variant` +holds the nozzle token: `0.4`, a suffixed `0.4HF`, or `0.4+0.6` for mixed nozzles +([rules](machine-profiles.md#printer_model-and-printer_variant)). ## `process` -`mm @` — [process-profiles.md](process-profiles.md#naming) has the -quality ladder and the `fdm_process_*` base names. The `@` is a human label, not a reference: it -usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers` -list or condition. +`mm @`. The quality word stays before `@` and the printer target after +it: a printer model in the quality position leaves the tier undescribed. The `@` is a label, +and need not equal any variant name; compatibility comes from `compatible_printers` or the +condition. The quality ladder and per-nozzle labels are in +[process-profiles.md](process-profiles.md#naming). ## `filament` -` @`. The product half is what `filament_id` hashes and what survives as the **alias** up -to the first `@`; the target half is a label except for reserved forms: +` @`. The product half, up to the first `@` and right-trimmed, is the **alias**: +shadowing matches on it and `filament_id` hashes it. The target half is a label, except for the +reserved forms: -- `@base` — a non-instantiated product root. `@base` is convention; a base is really identified by - `instantiation: "false"` and no `setting_id` ([the three-part shape](filament-profiles.md#the-three-part-shape)). -- `@System` — the OrcaFilamentLibrary selectable shim. The literal `Generic @System` is - load-bearing for 3MF/project recovery, beyond the alias rule ([alias shadowing](filament-profiles.md#alias-shadowing)). -- `@`, `@ `, `@ nozzle` — printer tunes, BBL's shape. - Other vendors differ (a bare model, a printer serial, Creality's `@-all`). Specificity is judged - from `compatible_printers`, not the name +- `@base`: a non-instantiated product root. Convention only; a base is really + `instantiation: "false"` without `setting_id` + ([the three-part shape](filament-profiles.md#the-three-part-shape)). +- `@System`: the OrcaFilamentLibrary selectable shim, and the convention for an all-printer product + (` @System`, empty `compatible_printers`). Not enforced, so a deviation is worth a review + comment. The literal `Generic @System` is also load-bearing for project recovery + ([alias shadowing](filament-profiles.md#alias-shadowing)). +- Printer tunes. BBL's shape is the reference: `@` (vendor-wide), `@ ` (one + model), `@ nozzle` (one variant). Other vendors differ: a bare model + (`QIDI ABS-GF@Q2-Series`), a printer serial, Creality's `@-all`. Judge specificity from + `compatible_printers`, never from the name ([one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product)). +- No colour in the product name: ` ` presets are not authored; colour is chosen at + runtime ([colour](filament-profiles.md#colour-is-a-runtime-property)). -## Not the same as the filename +## Bases -The loader keys off `name`, and a filename that disagrees usually still loads. Index `name` must equal the -file's `name`, and the filename should match `sub_path`; a mismatch that differs only in case breaks -another platform ([cross-platform paths](validation.md#cross-platform-paths)). +| Type | Base names | +| --- | --- | +| `machine` | `fdm_machine_common`, `fdm__common`, `fdm_klipper_common`, or an established machine-family base | +| `process` | `fdm_process_*`: shared roots and per-layer-height or per-nozzle bases such as `fdm_process_single_0.20` or `fdm_process___nozzle_` | +| `filament` | `fdm_filament_*` material roots, ` @base` product roots | + +There is no leading-underscore convention. Base names repeat across bundles by design: +every bundle may have its own `fdm_process_common`, and a product root such as `Fiberon PA6-CF @base` +can exist in both the library and a vendor. Investigate a newly authored base that kept an unrelated +selectable preset's name from a copy. + +## Uniqueness + +- Type + name is unique within a bundle, indexed or not; `check` enforces it. +- `machine_model` names are unique across the whole tree; `check` enforces it even with `--vendor`. + Printer-type lookup matches `printer_model` against every vendor's models and takes the first, so a + duplicate makes it depend on vendor order. +- At load, two selectable presets with one name discard the bundle, and a duplicate across vendors + is a validator error. Two bases with one name, or a base and a selectable preset, load silently and + the first in the index wins; an unindexed twin is therefore one `sub_path` edit away from becoming + the parent every child resolves to. + +## Filenames and paths + +The loader keys off `name`, and a filename that disagrees usually still loads, but keep the filename +equal to the `name` and to the index `sub_path`. Match the exact case of every `sub_path` and asset +filename: Linux filesystems distinguish case even when a macOS or Windows checkout does not, and +preset-name references are case-sensitive on every platform. Avoid Windows-invalid characters +(`< > : " | ? *`), reserved device names such as `CON` and `NUL` (with any extension), and trailing +spaces or dots in a path component; a space right before `.json` is not a trailing space. + +## Checking names + +Check the `name` of every newly added profile, and every intentional rename, against its type and role +(model, selectable preset or base). `check` does not enforce the shapes on this page: inspect the +added or renamed presets in the diff, use neighbouring names as context, and follow the bundle's +established style where the conventions allow variation. Preserve shipped names during ordinary +tuning; renaming a shipped selectable preset needs `renamed_from`. diff --git a/.claude/skills/orca-profiles/references/process-profiles.md b/.claude/skills/orca-profiles/references/process-profiles.md index 98f31bac1a..785c9ee358 100644 --- a/.claude/skills/orca-profiles/references/process-profiles.md +++ b/.claude/skills/orca-profiles/references/process-profiles.md @@ -1,14 +1,15 @@ # Process profiles -Processes live in `resources/profiles//process/` — selectable leaves and shared bases alike, and +Processes live in `resources/profiles//process/`, selectable leaves and shared bases alike, and every one of them is registered in `process_list`. There are no global processes shared across vendors. ## Naming -`"mm @"` — near-universal, so match it. +`"mm @"` is near-universal, so match it: the quality word before `@`, +the printer label after it ([naming.md](naming.md#process)). -Follow the bundle's existing quality vocabulary. BBL's common ladder relates the quality word to -the layer-height / nozzle ratio; it is a naming convention, not a loader constraint: +Follow the bundle's existing quality vocabulary. BBL's common ladder relates the quality word to the +layer height / nozzle ratio; it is a naming convention, not a loader constraint: | Quality | Ratio | 0.2 nozzle | 0.4 | 0.6 | 0.8 | | --- | --- | --- | --- | --- | --- | @@ -20,49 +21,50 @@ the layer-height / nozzle ratio; it is a naming convention, not a loader constra | Extra Draft | 0.7× | 0.14 | 0.28 | 0.42 | 0.56 | This is the `fdm_process_single__nozzle_` ladder; 0.4 is commonly the unsuffixed nozzle default. -Match neighbouring names rather than renaming shipped tiers to fit the table. +Newer BBL printers add High Quality, Balanced Quality and Strength tiers. Match neighbouring names rather +than renaming shipped tiers to fit the table. On a model with several nozzles, processes for the other +nozzles usually carry the nozzle in the label (`0.30mm Standard @BBL X1C 0.6 nozzle`); follow the bundle. -The `@target` is a human label, not a reference: most do not equal any real printer variant name. +The `@target` is a human label, not a reference: it need not equal any printer variant name. Compatibility comes from the resolved list or condition, not this label. ## Shape -A selectable leaf's only truly universal keys are `type`, `setting_id`, `name` and `instantiation`; -`inherits` and `from` are near-universal — plus compatibility. No slicing key is universal; even -`layer_height` is more often inherited than restated. A base has `type`, `name`, `instantiation`, almost -always `from`, and **no** `setting_id`. +A selectable leaf has `type`, `setting_id`, `name` and `instantiation`, normally `inherits` and +`from`, plus compatibility; its slicing keys, `layer_height` included, normally come from its bases. A +base has `type`, `name`, `instantiation`, `from`, and **no** `setting_id`. -**Target shape: a 7-key leaf.** `OrcaArena` is the cleanest model — +**Target shape: a 7-key leaf.** `OrcaArena` is the cleanest model: `fdm_process_common` → `fdm_process_arena_common` → `fdm_process_arena__nozzle_` → leaf, where the -leaf carries only `type`, `name`, `inherits`, `from`, `setting_id`, `instantiation`, +leaf carries only `type`, `name`, `inherits`, `from`, `setting_id`, `instantiation` and `compatible_printers`, and the per-nozzle base holds the layer height and all eight line widths. +[shared-bases.md](shared-bases.md#levels) says which level each process setting belongs to. -BBL, WonderMaker and Z-Bolt are uniform in *layering* — every leaf inherits a base, names its printers -directly and holds no layer height of its own — but not in key count. Imitate BBL's layering, not its -content: its leaves carry doubled `print_extruder_variant` arrays that no single-variant vendor needs. +BBL's *layering* is a model too (every leaf inherits a base, names its printers directly and holds no +layer height of its own), but not its content: its leaves carry multi-variant `print_extruder_variant` +arrays that no single-variant vendor needs ([extruder-variants.md](extruder-variants.md#process)). -Nearly every vendor ships its own `fdm_process_common` as the inherits-less root. Those files are not -identical; copying another vendor's version into a new bundle is normal. +A bundle has its own `fdm_process_common` as the inherits-less root, since a process inherits only +inside its bundle; starting a new bundle's from another vendor's copy is fine. -Beware leaf-inherits-leaf: Prusa chains several levels deep through sibling leaves, and Elegoo and -Flashforge do it too, so editing one selectable process silently changes others. Check a leaf's children -before editing it. +Beware leaf-inherits-leaf: a bundle may chain selectable processes several levels deep, so editing one +silently changes others. Check a leaf's children before editing it. ## Compatibility -Most leaves set `compatible_printers` directly; some inherit it from a base, and Prusa's fall through to +A leaf sets `compatible_printers` directly, inherits it from a base, or falls through to `compatible_printers_condition`. After resolving `inherits`, **every selectable process has one or the -other** — that is the invariant to review against. Unlike filaments, inheriting `compatible_printers` is +other**: that is the invariant to review against. Unlike filaments, inheriting `compatible_printers` is legitimate for a process, and no check enforces its presence. -- A non-empty `compatible_printers` makes `compatible_printers_condition` **dead code**. Use one or - the other. -- A condition that fails to parse means *compatible with everything* — a warning, not an error. A typo +- A non-empty `compatible_printers` makes `compatible_printers_condition` **dead**. Use one or the + other. +- A condition that fails to parse means *compatible with everything*: a warning, not an error. A typo widens compatibility instead of narrowing it. -- Matching is `boost::regex` **`regex_match`** — a full-string match, which is why every shipped - condition wraps its keyword in `.*`. Because it is boost rather than `std`, `.` also spans the newlines - inside `printer_notes`. -- A `printer_notes` keyword that prefixes another model's keyword matches both. Prusa guards it: +- A regex in a condition must match the **whole** string, so wrap the keyword in `.*`; `.` also spans + the newlines inside `printer_notes`. +- A `printer_notes` keyword that prefixes another model's keyword matches both. Guard it with a + character class after the keyword, and combine terms with `and`: ``` printer_notes=~/.*PRINTER_MODEL_COREONE[^_a-zA-Z0-9].*/ and nozzle_diameter[0]==0.4 and printer_notes=~/.*HF_NOZZLE.*/ @@ -70,76 +72,84 @@ legitimate for a process, and no check enforces its presence. The `[^_a-zA-Z0-9]` exists because `PRINTER_MODEL_COREONE_L` also contains `PRINTER_MODEL_COREONE`. -`compatible_printers` is almost always one element. A leaf listing a whole model family is where a newly -added printer is usually forgotten. +A leaf listing a whole model family is where a newly added printer is usually forgotten. -## What to review per nozzle +## Values to review per nozzle | Key group | Review | | --- | --- | | `line_width` and per-region widths | resolved widths suit the nozzle and layer height | -| `layer_height`, `initial_layer_print_height` | within the printer's limits | +| `layer_height`, `initial_layer_print_height` | within the printer's `min_layer_height` / `max_layer_height` | | print speeds | consistent with flow limits and hardware tuning | -| shell layers, wall loops, accelerations, support Z distances | preserve the intended thickness, motion and support behavior | +| shell layers, wall loops, accelerations, support Z distances | preserve the intended thickness, motion and support behaviour | -**A common starting pattern is nozzle + 0.02 mm**: 0.22 / 0.42 / 0.62 / 0.82 / 1.02. In that pattern, at 0.4, -`inner_wall_line_width`, `sparse_infill_line_width`, `skin_infill_line_width` and +**A common starting pattern is line width = nozzle + 0.02 mm**: 0.22 / 0.42 / 0.62 / 0.82 / 1.02. In +that pattern, at 0.4, `inner_wall_line_width`, `sparse_infill_line_width`, `skin_infill_line_width` and `skeleton_infill_line_width` widen to 0.45 and `initial_layer_line_width` to 0.5; at 0.2, `initial_layer_line_width` widens to 0.25. Also derived, and easily missed: -`ironing_inset = line_width / 2` (0.11 / 0.21 / 0.31 / 0.41). -These are examples, not required values; preserve intentional vendor tuning and percentage/automatic -widths, and validate their resolved values. +`ironing_inset = line_width / 2` (0.11 / 0.21 / 0.31 / 0.41). These are examples, not required values; +preserve intentional vendor tuning and percentage or automatic widths, and validate their resolved +values. -`min_layer_height` and `max_layer_height` are machine keys — no process file sets them. +`min_layer_height` and `max_layer_height` are machine keys; no process file sets them. -## Slice-time content checks +### Slicing limits -`Print::validate()` enforces four rules at slice time: +Slicing rejects a process that breaks one of these (the message in italics): -1. `initial_layer_print_height` ≤ min `nozzle_diameter` -2. `layer_height` ≤ min `nozzle_diameter` — *"Layer height cannot exceed nozzle diameter."* -3. `line_width` and the seven per-region widths (inner/outer wall, sparse infill, internal solid infill, - top surface, skin, skeleton) > `layer_height` — *"Line width too small"*. `support_line_width` only - when the object has support or a raft; `initial_layer_line_width` is never checked. -4. every width ≤ 5 × max `nozzle_diameter` — *"Line width too large"* +1. `initial_layer_print_height` ≤ the smallest `nozzle_diameter` (with a raft, the nozzle of the raft's + first-layer extruder). +2. `layer_height` ≤ the smallest `nozzle_diameter`: *"Layer height cannot exceed nozzle diameter."* +3. `line_width` and the seven per-region widths (inner and outer wall, sparse infill, internal solid + infill, top surface, skin, skeleton) > `layer_height`: *"Line width too small"*. + `support_line_width` is checked only when the object has support or a raft; + `initial_layer_line_width` is never checked. A width that resolves to 0 (automatic) is skipped. +4. Every width ≤ 5 × the largest `nozzle_diameter`: *"Line width too large"*. -Two further rules cover `bridge_line_width` (≤ nozzle diameter; > `layer_height` unless `thick_bridges` -and `thick_internal_bridges` are both on). The sweep starts from printer defaults rather than -enumerating every process. **A new non-default process gets no dedicated slice coverage in CI.** +Two further rules cover `bridge_line_width`: it must not exceed the nozzle diameter, and must exceed +`layer_height` unless `thick_bridges` and `thick_internal_bridges` are both on. The slice sweep starts +from printer defaults rather than enumerating every process: **a new non-default process gets no +dedicated slice coverage in CI.** ## What CI checks on a process Structure, not content: `process_list` name consistency **and** index coverage the other way, two files claiming one process name, the `extruder_clearance_radius` / `extruder_clearance_max_radius` conflict -pair, duplicate JSON keys, a file `normalize` would rewrite, and the five `setting_id` rules (the fifth -rejects the misspelled key `settings_id`). `compatible_printers` presence is checked for **filaments -only**. +pair, duplicate JSON keys, a file `normalize` would rewrite, the five `setting_id` rules (present on +selectable presets, absent from bases, equal to the formula outside `BBL/`, unique across the tree, and +no misspelled key `settings_id`), and the variant arrays: every array of `print_options_with_variant` +exactly `variant length × stride` wide in each selectable process that writes it, and a written +`print_extruder_id` one entry per variant +([variant arrays](validation.md#variant-arrays)). `compatible_printers` presence is checked for +**filaments only**. -Note the C++ loader derives a missing `setting_id` on the fly, so the validator will not fail a process -without one — only `orca_profile_tool.py check` catches it. Running the validator alone gives a false -all-clear. +The loader derives a missing `setting_id` on the fly, so the validator accepts a process without one; +only `orca_profile_tool.py check` catches it. +Running the validator alone gives a false all-clear. ## Silent failures specific to processes -- **Unknown or misspelled keys are discarded with no error and no warning.** They ship all over the - process tree, both plain typos (`inital_layer_height`, `tree_support_bramch_diameter_angle`, - `sparse_infill_patter`) and keys copied from other slicers that Orca never defined. -- Keys on the tool's `OBSOLETE_KEYS` list (`adaptive_layer_height`, `overhang_totally_speed`, …) are - rejected by `check`'s normalization pass across preset types; `normalize` removes them. - The additional per-key obsolete warnings read `filament/` only. -- A dangling `compatible_printers` inside an `instantiation: "false"` base is invisible to - `check_preset_references`: a base never becomes a `Preset` at all (its config goes into `config_maps` - and the loader returns early), so it is in no collection for the check to walk. -- Orphan bases that nothing inherits are scattered through the tree — usually the leftover of a - half-finished nozzle addition. +- **Unknown or misspelled keys are discarded with no error and no warning**, both plain typos + (`inital_layer_height`, `tree_support_bramch_diameter_angle`, `sparse_infill_patter`) and keys + copied from other slicers that Orca never defined. +- Keys on the tool's obsolete list (`adaptive_layer_height`, `overhang_totally_speed`, …) are rejected + by `check`'s normalization pass across preset types; `normalize` removes them. The additional per-key + obsolete warnings read `filament/` only. +- A dangling `compatible_printers` inside an `instantiation: "false"` base is reported only through a + selectable child that inherits it unchanged; it goes unreported when every child overrides the list, + or when the base has no instantiated children. +- Nothing flags an orphan base that nothing inherits, usually the leftover of a half-finished nozzle + addition. ## Adding a quality tier or a nozzle's processes -1. Choose the layer height and quality label using the vendor's existing ladder. -2. If the vendor has per-nozzle bases, add one (`fdm_process___nozzle_`) with the layer +1. Choose the layer height and quality label using the bundle's existing ladder. +2. If the bundle has per-nozzle bases, add one (`fdm_process___nozzle_`) with the layer height, nozzle-appropriate line widths, `initial_layer_print_height` and `ironing_inset`. 3. Add the leaf: 7 keys, `compatible_printers` naming the exact printer variant(s). -4. Register both in `process_list`, parent first. Bump the version, run the id tool, validate. -5. Slice this process explicitly with its intended printer; the sweep gives non-default tiers no - dedicated coverage. If it is a printer's `default_print_profile`, verify the exact name and - resolved compatibility too — the sweep may fall back or select another compatible process. +4. Register both in `process_list`, parent first, bump the version, run the id tool and validate: the + [authoring workflow](../SKILL.md#creating-or-modifying-a-profile). +5. Slice this process explicitly with its intended printer + ([on a copy of the tree](validation.md#checking-a-copy-of-the-tree)); the sweep gives non-default + tiers no dedicated coverage. If it is a printer's `default_print_profile`, verify the exact name and + resolved compatibility too: the sweep may fall back or select another compatible process. diff --git a/.claude/skills/orca-profiles/references/review-checklist.md b/.claude/skills/orca-profiles/references/review-checklist.md index 43dc5091f8..9037e364b4 100644 --- a/.claude/skills/orca-profiles/references/review-checklist.md +++ b/.claude/skills/orca-profiles/references/review-checklist.md @@ -1,35 +1,43 @@ # Reviewing a profile change -Start with delivery, identity and backward compatibility, then check the affected preset types. -The table highlights gaps that need human review. What CI *does* run: -[validation.md](validation.md). +Run `./scripts/check_profile.sh` on the applied diff first ([validation.md](validation.md) says what CI +runs), then work through the items below: delivery, identity and backward compatibility first, then the +affected preset types. The table lists the gaps CI cannot see, so only a reviewer catches them. | Not checked by CI | Consequence | | --- | --- | -| The `version` bump | The change never reaches an upgrading user | -| A misspelled setting key | Setting silently has no effect | +| The `version` bump | The change never reaches an upgrading user; an absent `version` hides the vendor from the setup wizard | +| A misspelled setting key | The setting silently has no effect | | A filename Windows cannot check out, or one that differs from its `sub_path` only in case | Works on the author's machine, breaks the bundle on another platform | -| `bed_model` / `bed_texture` / `hotend_model` pointing at a missing asset | Bed renders as Custom, hotend falls back to the generic model | +| `bed_model` / `bed_texture` / `hotend_model` / cover pointing at a missing asset | A missing bed model renders a generic custom bed and a missing texture renders none, the hotend falls back to the generic model, the cover shows a placeholder | | A nozzle size in a model's list with no matching variant | The size is offered and resolves to nothing | | A non-default process | `validate_slice` gives non-default quality tiers no dedicated coverage | | Whether the intended default survived compatibility selection | The sweep can select a different compatible preset | -| A dangling `compatible_printers` inside an `instantiation: "false"` base | A base never becomes a `Preset`, so the reference check never sees it (a bad `inherits` in a base *is* caught) | +| A dangling `compatible_printers` inside a base whose children all override it (or that has no instantiated children) | The reference check walks resolved selectable presets, so it reports a base's list only through a child that inherits it unchanged (a bad `inherits` in a base *is* caught) | +| A base nothing inherits | Dead weight, usually the leftover of an unfinished nozzle addition | | A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name | -| Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated | +| A preset differentiated only by colour, or an all-printer library preset without `@System` | Per-colour presets split one product across several ids and the selector fills with near-duplicates; CI stays green | +| Plate temperatures for plates the printer has | The user's plate reads an unset or inherited temperature | +| Per-extruder vector length on a multi-extruder printer | Silently padded (with the **first** value) or truncated | +| A new variant appended instead of inserted at its variant index, a variant array widened on a base with a shorter list, or a variant a filament/process lacks | Values shift onto the wrong extruder, are cut before any child inherits them, or resolve to the first variant: High Flow silently gets Standard values | +| A name that ignores its type's convention: a printer model in a `process` quality position, or an unrelated target label or base name left in a copied preset | The selector misrepresents the preset's quality or intended printer | +| Values: temperatures, speeds, widths, pressure advance | A wrong value prints wrong while CI stays green | ## 1. Was the vendor `version` bumped? For **every** bundle whose folder the diff touches, `resources/profiles/.json` must have its -`version` incremented — last component, carrying `.99` into the third component. A library change -means bumping `OrcaFilamentLibrary.json`. +`version` incremented: last component, carrying `.99` into the third component. A library change means +bumping `OrcaFilamentLibrary.json`. -*Why:* nothing in CI checks it, and `PresetUpdater` reinstalls only when `vendor_ver < resource_ver` — -without a bump the change reaches neither an upgrading user nor the author's own running app. +*Why:* nothing in CI checks it, and the app reinstalls a bundled profile set only when its version is +newer than the installed one: without a bump the change reaches neither an upgrading user nor the +author's own running app. Without any `version` the vendor vanishes from the setup wizard, and neither +`check` nor the validator reports it. ## 2. Was the index rebuilt, and does the diff contain only this change? -`check` now fails on an unregistered file, on an index `update-index` would reorder, and on a file -`normalize` would rewrite — so a PR that skipped them arrives red, and you do not have to spot the +`check` fails on an unregistered file, on an index `update-index` would reorder, and on a file +`normalize` would rewrite, so a PR that skipped them arrives red and you do not have to spot the omission yourself. Three things are still yours: - **The index diff belongs to this change.** `update-index` rewrites whole `*_list` sections. If the @@ -39,11 +47,15 @@ omission yourself. Three things are still yours: registration; `validate_custom` detects the break only for names covered by released fixtures. - **`normalize` edits content, not just layout.** It drops `version` and `is_custom_defined` from preset files, removes obsolete keys, deletes six print-speed keys from filament profiles, and resolves - `extruder_clearance_radius` against `extruder_clearance_max_radius` by keeping the larger. - Check that the keys it removed were meant to go. + `extruder_clearance_radius` against `extruder_clearance_max_radius` by keeping the larger + ([what normalize changes](validation.md#normalize-and-update-index-are-part-of-the-check)). Check that + the keys it removed were meant to go. -Obsolete keys fail `check`'s normalization pass and should be removed with `normalize`. -`check` also reports per-key obsolete warnings for filament profiles in the selected vendors. +Index order is dependency order, not alphabetical: parents and include templates before the presets +that use them, then, in name order, the entries that neither depend on nor are depended on by another +entry of their own list (such as a leaf filament whose only parent is in the library), and any entry on +a dependency cycle. Judge a hand-placed entry only by +`update-index --dry-run`: if it reports nothing to rebuild, the position is not a finding. *Why:* the index is the loader's only entry point. Out-of-order entries fail with `can not find inherits` and take the whole vendor bundle down; an unindexed file gets reviewed, merged and never loads. @@ -53,8 +65,8 @@ and take the whole vendor bundle down; an unindexed file gets reviewed, merged a No hand-typed or copied `setting_id` / `filament_id`. Instantiated presets have a `setting_id`; bases do not. `check` enforces all of that; what it cannot tell you is whether the identity *should* have moved. -A rewritten or removed `filament_id` means a product's identity moved — a rename, or an edited -`filament_vendor` / `filament_type` — and the old id is not forwarded anywhere. Confirm that was +A rewritten or removed `filament_id` means a product's identity moved (a renamed alias, or an edited +`filament_vendor` / `filament_type`), and the old id is not forwarded anywhere. Confirm that was intended, and that a new id is not a rename in disguise. *Why:* a duplicate `filament_id` on one printer makes AMS spool matching a coin toss; a copied @@ -62,127 +74,204 @@ intended, and that a new id is not a rename in disguise. ## 4. Does anything disappear for existing users? -A rename, a deletion, or a flip of `"instantiation": "true"` → `"false"` on a shipped preset removes the -name from the preset collection. It needs `renamed_from` on a successor — and only one preset may claim a -given old name. The claimed old name must **not** still be a live preset; the redirect is inert if it is. +A rename, a deletion, or a flip of `"instantiation": "true"` → `"false"` on a shipped selectable preset +removes the name from the preset collection. It needs `renamed_from` on a selectable successor +([renamed_from](vendor-bundle.md#renamed_from)), and only one preset may claim a given old name. The +claimed old name must **not** still be a live preset; the redirect is inert if it is. *Why:* user presets inheriting it die with `can not find parent for config !`; 3MF-embedded presets are dropped with no error at all. Commit `33923464ae` reverted exactly this for Cubicon; -`6943b6ddc3` redid it correctly. CI's `validate_custom` catches the shipped-name case — but not an inert -`renamed_from`. +`6943b6ddc3` redid it correctly with `renamed_from`. CI's `validate_custom` catches the shipped-name +case, but not an inert `renamed_from`. ## 5. Is `compatible_printers` right? -Exact printer **variant** names, non-empty on every instantiated filament outside OrcaFilamentLibrary -and written in the preset's own file — golden rule 6, with the flattened-vs-own-key trap in -[filament-profiles.md](filament-profiles.md#compatible_printers). Watch for a nozzle-specific variant that -inherited or copied the base's full printer list, and for two presets of one product with overlapping -lists — duplicate combobox entries and an ambiguous AMS match. +Exact printer **variant** names, non-empty on every instantiated filament outside OrcaFilamentLibrary, +and written in the preset's own file ([SKILL.md rule 9](../SKILL.md#rules); the resolved-vs-own-key trap +is in [filament-profiles.md](filament-profiles.md#compatible_printers)). A `machine_model` name instead +of a variant name is the usual mistake: `check` passes it, the validator reports +`references unknown compatible_printers`. Watch for a nozzle-specific tune that inherited or copied the +base's full printer list, and for two presets of one product with overlapping lists: duplicate combobox +entries and an ambiguous AMS match. Two presets of one product (`filament_id`) must not share a variant. Resolve it by specificity: move the -variant to the most specific preset and remove it from the more general ones — preferred over deleting a -profile. Then repoint the machine's `default_filament_profile` and the model's `default_materials` at the -profile that now covers it. See +variant to the most specific preset and remove it from the more general ones, which is preferred over +deleting a profile. Then repoint the machine's `default_filament_profile` and the model's +`default_materials` at the profile that now covers it. See [one variant, one profile](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product). -*Why:* real shipped bugs twice (`b7b3418baf` "showing up everywhere", `ff83aa41ef` duplicate Flashforge -entries). The Python `check` passes on an overlap; only the full `check_profile.sh` (`validate_system`) -reports `Ambiguous AMS filament match`. +*Why:* real shipped bugs twice (`b7b3418baf` filaments "showing up everywhere", `ff83aa41ef` duplicate +Flashforge entries). The Python `check` passes on an overlap; only the full `check_profile.sh` +(`validate_system`) reports `Ambiguous AMS filament match`. -## 6. Model ↔ variant ↔ process consistency +## 6. One product, one all-printer preset; colour is not a preset -- New nozzle size → the model's `nozzle_diameter` list extended, a variant with a matching - `printer_variant`, and at least one process listing that variant. -- `default_print_profile` is one exact name (not a `;` list), and that process's resolved - compatibility list or condition includes this printer. +No presets that differ only by colour: `filament_id` identifies a product, and the colour comes from the +spool at runtime. An all-printer library product is a ` @System` shim with an empty +`compatible_printers` ([colour](filament-profiles.md#colour-is-a-runtime-property)). + +*Why:* per-colour presets pass every check, so this is a review call. + +## 7. Model ↔ variant ↔ process consistency + +- A new nozzle size → the model's `nozzle_diameter` list extended, a variant with a matching + `printer_variant`, and at least one process listing that variant. Every size in the model's list has a + variant (unchecked). +- `default_print_profile` is one exact name (not a `;` list), and that process's resolved compatibility + list or condition includes this printer. - `default_filament_profile` is an array of names that exist. +- Each variant of the model has at least one compatible entry in the model's `default_materials`. -*Why:* an unlisted `printer_variant` is a hard bundle-load failure. Default process selection is -weaker: the sweep attempts the named default, then updates compatibility and rejects generic Default -fallbacks. Another compatible process can conceal a bad reference, so inspect it even after a pass. +*Why:* an unlisted `printer_variant` is a hard bundle-load failure. Default process selection is weaker: +the sweep attempts the named default, then updates compatibility and rejects generic Default fallbacks, +so another compatible process can conceal a bad reference. Inspect it even after a pass. -## 7. Types and spellings +## 8. Types and spellings Every value a string or an array of strings; `filament_type` an array; `instantiation` the string -`"true"`/`"false"` — golden rule 7. Check index metadata and model `nozzle_diameter` especially; -wrong types there can abort loading for **every** vendor. +`"true"` / `"false"`; custom G-code one string, never an array of lines ([SKILL.md rule 5](../SKILL.md#rules)). +Check index metadata and model `nozzle_diameter` especially: wrong types there can abort loading for +**every** vendor. The part only a reviewer can do: check new setting keys against `src/libslic3r/PrintConfig.cpp`. A -misspelled key is silently discarded (rule 8), the single most common way a profile edit does nothing -while CI stays green. +misspelled key is silently discarded ([rule 6](../SKILL.md#rules)), the single most common way a profile +edit does nothing while CI stays green. -## 8. Blast radius of a base edit +## 9. Blast radius of a base edit -A change to `fdm_*_common.json` reaches every child at once. Ask which presets it touches — several -reverts in this repo are exactly this (`41d1b0d3c8`, `dc491166a8`). Also check whether the edited leaf has -children of its own: Prusa, Flashforge and Elegoo all chain leaf-inherits-leaf several levels deep. +A change to `fdm_*_common.json` or any other base reaches every child at once. Ask which presets it +touches: several reverts in this repo are exactly this (`41d1b0d3c8`, `dc491166a8`). Also check whether +the edited leaf has children of its own: a bundle may chain leaf-inherits-leaf several levels deep. A +newly added base that nothing inherits is dead weight, and a dangling +`compatible_printers` inside a base is reported only through a child that inherits it unchanged. A diff +that only moves values between presets and bases must leave every selectable preset loading what it +loaded: ask for the `compare` result ([shared bases](shared-bases.md#nothing-loads-differently)), and +check each new base against the [balance rules](shared-bases.md#balance). -## 9. Do the numbers make sense for the nozzle? +## 10. Do the numbers make sense for the nozzle and material? -Check resolved widths and layer heights against the nozzle, and flow limits / pressure advance -against the actual hardware and material. The patterns in [process-profiles.md](process-profiles.md) -are examples, not mandatory values; [filament-profiles.md](filament-profiles.md) explains what to -revisit for a nozzle change. A cloned preset's unchanged MVS needs particular scrutiny. +Check resolved widths and layer heights against the nozzle, temperatures against the material (PLA +values under an ASA name print wrong), and flow limits / pressure advance against the actual hardware +and material. The patterns in [process-profiles.md](process-profiles.md#values-to-review-per-nozzle) +are examples, not mandatory values; [filament-profiles.md](filament-profiles.md#tuning-per-nozzle-and-per-variant) +explains what to revisit for a nozzle change. A cloned preset's unchanged volumetric speed needs +particular scrutiny. Settings tuned for real hardware cannot be verified by reading the diff. Say so rather than approving numbers nobody measured. -## 10. Asset references (not checked anywhere) +## 11. Plate temperatures + +A filament sets the plate temperature for every plate the printer plausibly has, as its siblings do; +`textured_cool_plate_temp` is the one most often forgotten +([twelve keys](filament-profiles.md#bed-temperature-is-twelve-keys-not-one)). + +## 12. Asset references (not checked anywhere) `bed_model`, `bed_texture`, `hotend_model` and `_cover.png` exist under -`resources/profiles//`. Broken references already ship; nothing checks them. +`resources/profiles//`, in exact case. Nothing checks them. -## 11. `default_materials` (checked by CI) +## 13. `default_materials` and `default_filament_profile` (checked by CI) -`check` fails on a `default_materials` / `default_filament_profile` name that resolves to no system -filament, so a dangling entry no longer reaches review. When compatibility moves between profiles of a -product, the machine's `default_filament_profile` and the model's `default_materials` must be repointed at -the most specific profile that still covers the variant, dropping generic entries that no longer apply — -the same [specificity rule](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product) -applies when adding or fixing defaults. Scope the run while working on one vendor: +`check` fails on a `default_materials` / `default_filament_profile` name that matches no filament file, +and `validate_system` on a variant with no compatible system filament in `default_materials`, so a +dangling entry no longer reaches review. When compatibility moves between profiles of a product, the +machine's `default_filament_profile` and the model's `default_materials` must be repointed at the most +specific profile that still covers the variant, dropping generic entries that no longer apply; the same +[specificity rule](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product) applies +when adding or fixing defaults. Scope the run while working on one vendor: ```bash python3 scripts/orca_profile_tool.py check --vendor "" # py -3 on Windows ``` -## 12. Per-extruder vector lengths (not checked) +## 14. Per-extruder vectors (not checked) and variant arrays (widths and layout checked) -One entry per extruder for the plain per-extruder vectors; the `printer_options_with_variant_1` keys are -sized to `printer_extruder_variant` instead. A wrong length is silently padded — repeating the **first** -value, not the last — or truncated. The two sizing families and the worked cases are in +One entry per extruder for the plain per-extruder vectors; the variant sets are sized to the variant +length, `len(printer_extruder_variant)` or one per extruder when the resolved preset has no layout (a +per-extruder difference in those keys still needs the layout, since the loader keeps only the +first value of a list-less printer's arrays). A wrong length is silently padded, repeating the **first** +value, not the last, or truncated. The two sizing families and the worked cases are in [machine-profiles.md](machine-profiles.md#multi-extruder-idex-and-tool-changers). -## 13. Non-default processes get no slice coverage +`check` reports a variant array of any type that is not exactly the `variant length × stride` width +of the selectable preset that writes it, one value included, as an error whatever the values; +`check --strict` also reports one that reaches a selectable preset at another width. A base is not +judged on its own. On a machine it +also reports layout keys that disagree: `printer_extruder_variant` / `printer_extruder_id` not the +flattening of `extruder_variant_list`, a variant without its extruder's `extruder_type` prefix, a +`default_nozzle_volume_type` the extruder does not list, a list of several variants without the pair, a +pair without the list that puts several variants on one extruder. On a machine or a process, an id +array, written or inherited, whose length differs from its variant list is an error; the id and +layout rules judge the composed preset without `--strict`. Two layout findings are warnings: a +pair without the list that `single_extruder_multi_material` off would replace at load, and a process +without `print_extruder_id` whose variants repeat. The full rules are in +[variant arrays](validation.md#variant-arrays). `check_variant_names` separately holds every variant +string, `extruder_type`, `nozzle_volume_type` and `default_nozzle_volume_type` to the engine's enums +in every bundle, BBL included, failing on a dead variant, a legacy spelling and a variant list that +names one variant twice ([variant names](validation.md#variant-names)). + +On a multi-variant printer, still check by hand: + +- that a new variant's values sit at its variant index (machine limits as a (normal, silent) pair at + `2 × index`) in every file of the chain that restates the key, `include` templates included; +- that each process lists every (extruder id, variant) pair its printers can select; +- that no array was widened on a base with a shorter variant list: the loader cuts it before the + children inherit it ([composition](extruder-variants.md#padding-truncation-and-composition)), and + `check`, even `--strict`, composes without that cut, so it passes; +- that only keys in [the four sets](extruder-variants.md#the-four-key-sets) carry per-variant values; +- that the High Flow variants carry measured values rather than copies + ([checking and testing](extruder-variants.md#checking-and-testing)). + +## 15. Non-default processes get no slice coverage `validate_slice` starts from printer defaults; it does not enumerate every process. Slice a new or -changed non-default tier explicitly with its intended printer. +changed non-default tier explicitly with its intended printer +([on a copy of the tree](validation.md#checking-a-copy-of-the-tree)). -## 14. Housekeeping worth a nit, not a block +## 16. Do the preset names follow the conventions? -`"from"` other than `"system"` (the preset-bundle loader ignores it, though the CLI's config-file loader -rejects anything but `system`/`user`/`User`), `printer_settings_id` copied from another -vendor, and a filename that disagrees with the preset's `name` (common; the loader keys off `name`). +Check **every newly added profile and intentional name change**, including models and bases, against +[the naming conventions](naming.md#checking-names): no printer model in a process quality position, no +target label or base name left over from a copied preset, the bundle's established style. Preserve +shipped names during ordinary tuning; renaming a shipped selectable preset requires the migration in +item 4. -## 15. Cross-platform filenames and paths (not checked) +*Why:* CI checks name uniqueness, but does not enforce the naming conventions. Catch naming mistakes +before the names ship and existing projects depend on them. -Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots, -and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths). +## 17. Cross-platform filenames and paths (not checked) + +Check for Windows-invalid characters, reserved device names, trailing path-component spaces or dots, +and case mismatches between `sub_path` or asset references and the files on disk. See +[filenames and paths](naming.md#filenames-and-paths). + +## 18. Housekeeping worth a nit, not a block + +`"from"` other than `"system"` (the bundle loader ignores it, though loading the file as a CLI config +rejects anything but `system` / `user` / `User`), `printer_settings_id` copied from another vendor, +redundant overrides that restate the parent's value, siblings that each repeat a value their base could +hold ([shared bases](shared-bases.md)), and a filename that disagrees with the preset's +`name` (the loader keys off `name`). --- ## Reporting the review -A finding is: **one defect**, its file, what breaks at runtime or in CI, and the fix. Split independent -defects into separate findings even when they live in one file — five id problems in one bullet get one -fix and four survivors. +A finding is **one defect**: its file (or quoted lines), what breaks at runtime or in CI, and the fix. +Split independent defects into separate findings even when they live in one file: five id problems in +one bullet get one fix and four survivors. Say which findings `check` or the validator reports and which +only a reader catches: a missing version bump, a misspelled key and wrong temperatures pass CI, so a +contributor who only reruns the tools fixes what CI flags and resubmits the rest. Severity discriminates only if it is earned: | Severity | Means | | --- | --- | | blocker | the bundle fails to load, or a preset is unreachable at runtime | -| major | CI fails, or existing users lose a preset | -| minor | wrong-but-working: dead keys, `from`, naming, redundant overrides | +| major | CI fails, existing users lose a preset, or a value prints wrong while CI stays green (PLA temperatures under an ASA name; a misspelled key whose intended value differs from the inherited one) | +| minor | wrong but working: redundant or dead keys that change nothing, `from`, naming | -Compute every number and id (`orca_profile_tool.py`, a scripted count) or omit it — one invented count -makes a reader stop trusting the right ones. Report a command's result only if you ran it. +Compute every number and id (`orca_profile_tool.py`, a scripted count) or omit it: one invented count +makes a reader stop trusting the right ones. Report a command's result only if you ran it. End with a +verdict: can it merge as it stands? diff --git a/.claude/skills/orca-profiles/references/shared-bases.md b/.claude/skills/orca-profiles/references/shared-bases.md new file mode 100644 index 0000000000..500cd34006 --- /dev/null +++ b/.claude/skills/orca-profiles/references/shared-bases.md @@ -0,0 +1,254 @@ +# Shared bases + +Use this when drafting several presets at once, after `fix-variant`, or when sibling presets repeat the +same values. Each value is written once, on the base of the group it is true for, and a selectable +preset holds its identity and what makes it different. The work has two halves: choosing the groups, +which is judgment, and moving the values, which must leave every preset loading exactly what it loaded +before. + +## When + +- **Drafting** a printer family, a quality ladder or a product line: place each setting at its + [level](#levels) before writing any preset, then write the presets as overrides + ([Rule 7](../SKILL.md#rules)). +- **After `fix-variant`.** It resizes each array in the selectable preset that writes it and never + moves or deletes a value ([variant arrays](validation.md#variant-arrays)). A family whose presets all + wrote one value now repeats the widened array in every preset, and a preset that restated what it + inherits now restates it wider. +- **Converting full copies**: a machine that inherits nothing, or a filament that restates fifty-plus + keys, is the style to move away from ([filament style](filament-profiles.md#style)). + +Out of scope: + +- **BBL.** Its profiles are synced from BambuStudio: a restructure is overwritten by the next sync and + makes every later sync diff unreadable. Fix BBL values in the file that holds them. +- **OrcaFilamentLibrary bases for one vendor's values.** A library base reaches every bundle's + filaments. Put a vendor's shared values on a base in its own bundle (a product `@base`, or a vendor + base that inherits the library's), and change a library base only for a value true of every filament + below it in every bundle. +- **Families the change does not touch.** Restructure the presets you are already changing; a + bundle-wide pass is a change of its own. Commit a restructure without any value change, so `compare` + alone verifies it. + +## Nothing loads differently + +A restructure changes where values are written, never what a selectable preset loads. Presets keep +their `name` and `setting_id`, and user presets and projects refer to a system preset by name and store +their own changes against what it loads, so an unchanged load changes nothing for users. Prove it with +the bundled helper, from the repository root (every subcommand takes `--profiles ` to work on a +copy of the tree): + +```bash +python3 .claude/skills/orca-profiles/scripts/shared_settings.py snapshot # before any edit +python3 .claude/skills/orca-profiles/scripts/shared_settings.py compare # after: "0 difference(s)", exit 0 +``` + +`snapshot` records every selectable preset of every bundle as the loader stores it: the parent's stored +config, each `include` at the width its file wrote, the preset's own keys, then every variant array +resized to the preset's own variant list ([composition](vendor-bundle.md#inherits-and-include)). It +models the step `check` does not see: a base is stored after its own resize, so an array wider than a +base's list reaches its children cut. It also leaves out what the loader reads from each file and never +hands down (`name`, `type`, `from`, `instantiation`, `inherits`, `include`, `setting_id`, +`renamed_from`, `description`, `version`, `url`, `is_custom_defined`), so those keys never move to a +base. Nor does it record `print_settings_id`, `printer_settings_id` or `filament_settings_id`: the app +replaces them with the selected presets' names before slicing, so a file's value never counts. Delete +them from the presets you restructure rather than moving them to a base. + +It does not know the built-in defaults, so `compare` lists a key written on one side only (no file of +the preset's chain writes it on the other) apart from the differences, and exits 1 for either. A +difference is a value the edit changed: undo it, or make it a separate, deliberate change. A one-sided +key is no change only when its written value is the option's default in `PrintConfig.cpp`: confirm +each, as when a preset that loaded the default by leaving a key out must now write it +([Balance 5](#balance)). A value equal to the default needs writing nowhere when no base above writes +another: delete it from the presets rather than moving it, and confirm the one-sided keys. + +## Levels + +A base stands for a level of the vendor's catalogue, and a setting lives at the level that determines +it. The test for a shared value: if it had to change for one preset of the group, should it change for +all of them? If yes, it is the group's and goes on the group's base. A value that is only equal today +(two unrelated printers with the same acceleration) stays in each preset: a base built on coincidence +is later edited for one preset and silently changes the others. For a default with exceptions +([Balance 5](#balance)), ask the question of the presets that inherit the default. + +The tables give each setting's usual level; the test decides for a given bundle: where each toolhead +(Bowden or Direct Drive) has its own default filament, `default_filament_profile` follows the +toolhead, not the nozzle. Levels run +coarse to fine, and a chain need not visit every level: each preset or base inherits the next coarser +level that has a base. + +| Machine level | Base | Settings it determines | +| --- | --- | --- | +| Vendor | `fdm_machine_common`, `fdm__common` | the vendor's defaults for every printer | +| Firmware | `fdm_klipper_common`, `fdm_marlin_common` | `gcode_flavor`, G-code that calls the firmware's macros (layer change, pause, filament change), `host_type`, `print_host`, the thumbnail format | +| Hardware family: models that share a frame, motion system, toolhead or extruder layout | `fdm___common` (`fdm_qidi_x3_common`, `fdm_machine_eryone_ER20_common`) | the `machine_max_*` limits, `extruder_clearance_*`, the toolhead's retraction where every nozzle shares it, `z_hop` and wipe, fitted hardware such as `auxiliary_fan`, the extruder count and per-extruder vectors, the variant layout ([Printer rule 2](extruder-variants.md#printer-machine)) | +| Model: one `machine_model`, which for an IDEX printer includes its mode | the default-nozzle preset where the bundle hangs its other nozzle presets off it; otherwise `fdm___common` | `printable_area`, `printable_height`, `bed_exclude_area`, the model's start G-code, a COPY or MIRROR mode's settings | +| Nozzle: the selectable preset | none | `printer_model` and `printer_variant`, which name the preset's model and nozzle and stay in every preset as the tree writes them; `nozzle_diameter`, `min_layer_height`, `max_layer_height`, `default_print_profile`, `default_filament_profile`, retraction the vendor tunes per nozzle | + +A family may split once more, into toolhead or revision groups that exist only within it: +`fdm___common` → `fdm___mk1_common`. A split that crosses another axis is not a +level: when every controller comes with every toolhead, a toolhead base under each controller base +repeats the same values in each ([Balance 6](#balance)). + +| Process level | Base | Settings it determines | +| --- | --- | --- | +| Vendor | `fdm_process_common`, `fdm_process__common` | strategy: seam, wall order, infill and support patterns | +| Printer family or variant layout | `fdm_process___common` (`fdm_process_arena_common`, BBL's `fdm_process_dual_common`) | speeds, accelerations and jerk of that motion system; the variant layout ([Process rule 4](extruder-variants.md#process)) | +| Layer height × nozzle | `fdm_process___nozzle_` (BBL's `fdm_process_single_0.20`) | `layer_height`, line widths, shell layers, speeds scaled to the layer | +| Quality × printer: the selectable preset | none | `compatible_printers`, and what is unique to that combination | + +| Filament level | Base | Settings it determines | +| --- | --- | --- | +| Material | `fdm_filament_` in OrcaFilamentLibrary, shared by every bundle | material defaults | +| Product | ` @base` | `filament_id` (minted here, [ids](ids.md)), `filament_vendor`, `filament_type`, density, cost, the product's temperatures and cooling | +| Printer or nozzle tune: the selectable preset | none | `compatible_printers` (always in its own file, [Rule 9](../SKILL.md#rules)), volumetric speed, flow ratio, pressure advance and retraction measured on that printer | + +**Equal where they must differ is a copy.** A key that follows a finer level, such as the layer-height +limits and line widths that follow the nozzle diameter or `printable_area` that follows the bed, never +moves above that level. When presets that differ in it carry the same value, the value was copied: leave +it in the presets and report it (the [worked example](#worked-example-an-idex-family) has one). + +## Balance + +1. **One group, one base; use the existing one first.** A base is the home of the presets below it, + whatever its name. In a bundle whose presets are all one family, the vendor base is the family base, + so the family's values go there. In a bundle that hangs the other nozzles off the default-nozzle preset, that preset is the model's home. + Never create a base whose presets are exactly its parent's. Where two existing bases already serve + the same presets (a copied `fdm_machine_common` above the vendor's own base), the finer one is the + home, and merging the pair is a change of its own. Moving a key into an existing home adds no file. + A base value that no preset below it loads is dead: replace it with the group's value when there is + one; otherwise leave it and report it, since a future preset would inherit it. +2. **A new base must stand for a level and pay for itself.** Its file costs five metadata keys and an + index entry, so create it only when it takes `k` keys off `n` selectable presets with + `(n − 1) × k > 6`, where a custom G-code value counts as one key per G-code line: what it removes + must outnumber what it adds. A model with two nozzles that share three short keys keeps them in both. +3. **No ad-hoc bases:** never a base for presets that merely agree (the ones with 0.8 mm retraction), + and never a base with one preset below it. +4. **Keep every selectable preset within four ancestors**, selectable parents included. When a level would push a preset past that, fold it into the level above or leave + its keys in the presets. +5. **A default with exceptions.** A value that only some presets below a shared base load moves to that + base, whichever axis it follows, when two conditions hold. More presets load it than any other value + (on a tie the key stays in the presets), and `w − a > 1`, where `w` presets drop their copy and `a` + presets that take the key from the base and load another value, the built-in default included, must + now write theirs. Presets that write another value keep it and are unaffected. The base then holds + the group's default, and the exceptions stay visible in their own files. +6. **One chain; the other axes stay in the presets.** `inherits` follows one axis. When presets vary + along several (bed size × controller × toolhead), first fill the existing homes by + rules 1 and 5. Then give new bases to the axis whose bases pay most: sum rule 2's count over its + bases, less the keys a re-parented preset must now write because it no longer inherits them from its + old parent; on a tie, follow the layering the bundle already has. Leave the other axes' keys in the + presets, and never repeat one axis's bases under each group of another. Outside BBL, whose synced + presets need theirs, add no `include` template for a second axis: the loader reads `include` only + since #15869 (2026-09-25), and an app that predates it ignores the key, so the template's settings + never reach the preset. + +Name a new base after its level ([base names](naming.md#bases)). The name must be unique in its bundle +and must not equal a selectable preset's: two such presets load silently and the first in the index wins +([uniqueness](naming.md#uniqueness)). + +## Restated values + +`candidates` lists every key a file writes that it would load unchanged without writing it. Delete it +when the value is what the presets below the base that supplies it share: more of them load it, +written or inherited, than any other value. A family that restates machine limits, clearances and +G-code every other printer of the bundle loads from `fdm_klipper_common` drops its copies. When most +presets below that base load another value, the match is a coincidence: keep the key, and move it to +the level of the presets that share it. Keys of the nozzle level stay in the preset in +either case. + +After a restructure the report still lists keys that are right where they are: the nozzle-level keys +each preset keeps, and arrays a list-less multi-extruder base writes at its presets' width for +`check --strict`. + +## Variant arrays on a base + +- The loader stores a base with its variant arrays resized to the base's own variant list, one variant + when it writes none, so an array on a narrower base reaches its presets as its first value, padded. + Move a variant array to a base only when the base declares the presets' variant list (and, for a + machine or process, their ids), moving the layout keys with it as + [Printer rule 2](extruder-variants.md#printer-machine) and [Process rule 4](extruder-variants.md#process) + ask; or when the presets load its first value anyway: every value is equal, or the presets are + list-less machines, which the loader cuts to one variant. `compare` catches a cut. +- Write the array on the base at the width of the presets it serves, their `N` + ([sizing equation](extruder-variants.md#sizing-equation)), so `check --strict` judges the right width + where it reaches them. When the presets below a base need different widths (single- and + dual-extruder models on one base), leave the array in the presets, or on bases that each serve one + width. +- On a list-less multi-extruder family base, declare the extruder count: `nozzle_diameter` and the other + per-extruder vectors at one entry per extruder. The base then has its presets' width, and + `fix-variant --strict` writes an array that reaches the presets at another width into the base once, + instead of into every preset. +- Deleting a restated variant array leaves the preset on the inherited array. Plain `check` accepts + that; `check --strict` reports it when the inherited width differs, which is why a bundle held to + `--strict` restates the array at each preset's width. + +## Procedure + +1. **Snapshot** the tree before any edit, `fix-variant` included. After `fix-variant`, run `compare`: a + difference is a value its padding changed (it repeats the last value, the loader the first). Set that + value deliberately, then snapshot again as the baseline for the restructure. +2. **List the candidates:** + + ```bash + python3 .claude/skills/orca-profiles/scripts/shared_settings.py candidates --vendor "" --type machine + python3 .claude/skills/orca-profiles/scripts/shared_settings.py candidates --vendor "" --type machine --group-by printer_model + ``` + + It prints the [restated values](#restated-values), then, per base, the keys every selectable preset + below it loads with one value and how many of those presets write it themselves, and under + `default with exceptions` the values that pass [Balance 5](#balance), with `w` and `a`. With + `--group-by ` it groups the selectable presets by that key's value instead and names each + group's nearest common base, where a new base would go: `printer_model` for models, `gcode_flavor` + for firmware, `extruder_type` or `default_filament_profile` for toolheads, `filament_id` for + filament products, `layer_height` for processes. The report is evidence, not a plan: it cannot tell + a shared value from a coincidence or a copy. +3. **Decide each key** by [Levels](#levels), [Balance](#balance) and + [Restated values](#restated-values): delete the restatements of shared values, move group values up + to the group's home, and create only the bases that pay. +4. **Edit.** Each new base gets `"type"`, `"name"`, `"from": "system"`, `"instantiation": "false"`, no + `setting_id`, and `inherits` set to the presets' old parent. Point the presets' `inherits` at it and + delete the moved keys from them. Bump the version, then run `normalize`, `update-index` (it orders + parents first) and `generate-id --dry-run`, which must write nothing: bases take no id and presets + keep theirs. +5. **In a bundle held to `--strict`, run `fix-variant --strict` now**, so it writes into the new bases. +6. **Verify.** `compare` prints `0 difference(s)`, and every one-sided key it lists is a default. + `check` reports no error it did not report before, and neither does `check --strict` where the bundle + passes it. Then run the [authoring checks](../SKILL.md#creating-or-modifying-a-profile). +7. **Report** each base added (name, level, presets below it, keys it holds), the keys left in presets + and why, the copies found, and the `compare` result. + +## Worked example: an IDEX family + +A Klipper bundle's IDEX family has 36 selectable machines (bed size 300, 400 or 500 × normal, COPY or +MIRROR mode × 0.4, 0.5, 0.6 or 0.8 nozzle) that all inherit `fdm_klipper_common` directly and write 49 +keys each. `fix-variant` has widened their retraction arrays to two values and their machine limits +to four. + +- **Restated.** All 36 restate 10 values that every other printer of the bundle loads from + `fdm_klipper_common`: three machine limits, the three clearances, wipe, `retract_before_wipe`, and the + layer-change and pause G-code. Delete them. +- **Family.** All 36 load one value for 24 more keys: the other machine limits, `extruder_offset`, + retraction, `z_hop`, `single_extruder_multi_material`, `manual_filament_change`, the remaining G-code + except the start G-code, and thumbnails. A new family base, `fdm___idex_common`, + holds them, plus `nozzle_diameter` `["0.4", "0.4"]` for the extruder count: at least + `(36 − 1) × 24 = 840`. +- **Model.** Each `printer_model` (a bed size in one mode) has four nozzle presets that share + `printable_area`, `printable_height` and a three-line `machine_start_gcode`: `(4 − 1) × 5 = 15`, so + one base per model, nine in all. The family does not hang its other nozzles off a default-nozzle + preset, so the model level here is a base. +- **A coincidence.** The twelve 500 presets' `printable_height` 500 equals `fdm_klipper_common`'s, but + every preset of the bundle writes its own height and 300 is the most common. The 500 is the base's + leftover, not a shared value, so it stays on the model bases. +- **A copy.** In COPY and MIRROR mode, every nozzle of a model carries the 0.4 nozzle's + `min_layer_height`, `max_layer_height` and `retract_lift_below`: 0.06, 0.3 and 0.2 on the 0.8 nozzle, + where normal mode has 0.12, 0.5 and 0.3. `candidates --group-by printer_model` lists the first and + last as shared by the model, and `max_layer_height` as restated from `fdm_klipper_common`, whose value + is also 0.3. They follow the nozzle, so they stay in the presets and are reported for tuning. +- **Nozzle.** Each preset keeps `printer_model`, `printer_variant`, `nozzle_diameter`, + `min_layer_height`, `max_layer_height` and `retract_lift_below` beside its metadata. +- **Result.** 36 full presets become 36 short ones on 10 new bases. `compare` reports 0 differences, + `check --vendor ""` passes as before, and `generate-id --dry-run` writes nothing. + `check --strict` reports more errors than before, because the deleted variant arrays now reach the + presets at `fdm_klipper_common`'s one value. `fix-variant --strict` writes those arrays into the + family base alone, after which `check --strict` passes for the family and `compare` still reports 0 + differences. diff --git a/.claude/skills/orca-profiles/references/validation.md b/.claude/skills/orca-profiles/references/validation.md index c23b555f49..b5c647f839 100644 --- a/.claude/skills/orca-profiles/references/validation.md +++ b/.claude/skills/orca-profiles/references/validation.md @@ -1,8 +1,8 @@ # Validating profiles ```bash -./scripts/check_profile.sh # everything CI runs -./scripts/check_profile.sh --vendor "" # fast loop +./scripts/check_profile.sh # everything CI runs +./scripts/check_profile.sh --vendor "" # development loop ./scripts/check_profile.sh profile_tool validate_slice # named checks only ``` @@ -12,153 +12,316 @@ scripts\check_profile.bat -Vendor "" scripts\check_profile.bat profile_tool validate_slice ``` -`check_profile.bat` is a shim around `check_profile.ps1` — same checks, same order, same logs; -the flags take PowerShell spellings (`-Vendor`, `-ProfilesDir`, `-Validator`, `-Download`, `-Refresh`, -`-WorkDir`, `-LogLevel`) and positional check names are unchanged. `-p`, `-v` and `-l` are aliases, so -`-v Elegoo -l 2` reads the same on both platforms. It passes `-ExecutionPolicy Bypass` because a +`check_profile.bat` is a shim around `check_profile.ps1`: same checks, same order, same logs. Its flags +take PowerShell spellings (`-Vendor`, `-ProfilesDir`, `-Validator`, `-Download`, `-Refresh`, +`-WorkDir`, `-LogLevel`), and positional check names are unchanged. `-p`, `-v` and `-l` are aliases, +so `-v Elegoo -l 2` reads the same on both platforms. It passes `-ExecutionPolicy Bypass` because a default Windows client refuses to run a checked-out `.ps1` at all. The `.ps1` finds Python itself, probing `py -3`, then `python`, then `python3`; run the tool by hand with `py -3` for the same reason. -Every check in the run happens even after an earlier one fails; the script exits non-zero if any did, and writes -`logs/.log` plus, on failure, `pr_comment.md` under a per-user cache dir — the same report CI posts on the PR. -That dir is `~/Library/Caches/orca-profile-check` on macOS, `${XDG_CACHE_HOME:-~/.cache}/orca-profile-check` on Linux -and `%LOCALAPPDATA%\orca-profile-check` on Windows; it is named apart from OrcaSlicer's own per-user dirs and sits -outside the checkout, so every worktree shares one copy. `--work-dir` / `-WorkDir` overrides it. A stale `.lock` -there after a crash must be removed by hand. +Every check runs even after an earlier one fails; the script exits non-zero if any failed, and writes +`logs/.log` plus, on failure, `pr_comment.md` (the same report CI posts on the PR) under a +per-user cache dir: + +| Platform | Cache dir | +| --- | --- | +| macOS | `~/Library/Caches/orca-profile-check` | +| Linux | `${XDG_CACHE_HOME:-~/.cache}/orca-profile-check` | +| Windows | `%LOCALAPPDATA%\orca-profile-check` | + +It is named apart from OrcaSlicer's own per-user dirs and sits outside the checkout, so every worktree +shares one copy and each run overwrites its `logs/`. `--work-dir` / `-WorkDir` overrides it. + +When other worktrees or agents may run checks too, pass `--work-dir ` from the start +and capture the console output yourself: the shared `logs/` can belong to another run by the time you +read them. With `--work-dir`, also pass `--validator` pointing at the cached nightly, so the new dir +does not download it again: + +| Platform | Cached validator | +| --- | --- | +| Linux | `/validator/OrcaSlicer_profile_validator` | +| macOS | `/validator/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator` | +| Windows | `\validator\OrcaSlicer_profile_validator.exe` | + +Copying the cached `profile-fixtures/` into the new dir reuses the fixture archives; the fixture +`manifest.json` is still downloaded on every run, so `validate_custom` needs the network either way. +`another run is using ` means a live run holds `/.lock`: leave it and use your own +`--work-dir`. Only a `.lock` with no `check_profile` process alive is a crash leftover; delete it by +hand. ## The five checks | Check | Command it runs | Catches | | --- | --- | --- | -| `profile_tool` | `python3 scripts/orca_profile_tool.py check` | index coverage **both ways**, preset-name collisions, files `normalize`/`update-index` would still rewrite, duplicate JSON keys, filament `compatible_printers`, `filament_type` array, conflict keys, id length, **all `setting_id` and `filament_id` rules** | -| `validate_system` | `validator -p resources/profiles -l 2` | load errors, missing filament `compatible_printers`, dangling `inherits`/`compatible_*`, duplicate `filament_id` per printer | -| `validate_slice` | `validator -p … -s -l 2` | custom G-code expansion, unresolvable printer defaults | -| `validate_filament_subtypes` | `validator -p … -l 2 -f` | nothing extra — see below | -| `validate_custom` | `validator -p -l 2` | a shipped preset name that a past release offered no longer resolving | +| `profile_tool` | `python3 scripts/orca_profile_tool.py check` | index coverage **both ways**, preset-name collisions, files `normalize` / `update-index` would still rewrite, duplicate JSON keys, filament `compatible_printers`, `filament_type` array, conflict keys, variant strings and array widths and layout keys, dangling `default_materials`, id length, **all `setting_id` and `filament_id` rules** ([below](#orca_profile_toolpy-check)) | +| `validate_system` | `validator -p resources/profiles -l 2` | load errors, missing filament `compatible_printers`, dangling `inherits` / `compatible_*`, duplicate `filament_id` per printer (`Ambiguous AMS filament match`), printer defaults that name no compatible system filament | +| `validate_slice` | `validator -p … -s -l 2` | custom G-code expansion and unresolvable printer defaults, by slicing | +| `validate_filament_subtypes` | `validator -p … -l 2 -f` | nothing extra; see below | +| `validate_custom` | `validator -p -l 2` | a shipped preset name that a past release offered no longer resolving | -**`-f` is a no-op.** It is declared `po::bool_switch()->default_value(true)`, so the duplicate-`filament_id` -check runs whether or not you pass it — `validate_system` already fails on duplicates. The binary's own -`--help` ("Off unless this flag is present") does not reflect that default. +**`-f` is a no-op.** It defaults to on, so the duplicate-`filament_id` check runs whether or not you +pass it, and `validate_system` already fails on duplicates. The binary's own `--help` ("Off unless this +flag is present") does not reflect that default. -### `validate_custom` — the backward-compatibility gate +**A `--vendor` run reads differently from CI.** The validator's `-v` loads that vendor plus +OrcaFilamentLibrary and nothing else, so every library tune whose `compatible_printers` names another +vendor's printers fails `validate_system`, `validate_filament_subtypes` and each `validate_custom` +fixture with thousands of `references unknown compatible_printers "Bambu Lab …"` lines. Under +`--vendor`, `profile_tool` and `validate_slice` are the meaningful results; for the other three, filter +the log for your vendor's files and treat only those lines as findings. The unscoped run is the CI +result; run it before the PR. -Downloads one fixture archive per past release (v1.9.0 onwards) of *generated mock* user presets — -a `__orca_test` copy of every system preset that -release shipped, cut with the validator's own `-g 1` mode — unpacks each over a copy of the current tree -and loads it. Each entry holds only `inherits` plus a canned diff, so the one failure it adds over -`validate_system` is a shipped preset name disappearing. (The whole current tree sits under each fixture, -so every `validate_system` error fails it too.) This is what makes a rename or an -`instantiation` flip a CI failure rather than just a user complaint, and the reason `renamed_from` is -mandatory. +### `validate_custom`: the backward-compatibility gate + +It downloads one fixture archive per past release (v1.9.0 onwards) of *generated mock* user presets: a +`__orca_test` copy of every system preset that release shipped, cut with the +validator's own `-g 1` mode. It unpacks each over a copy of the current tree and loads it. Each entry +holds only `inherits` plus a canned diff, so the one failure it adds over `validate_system` is a shipped +preset name disappearing. This is what makes a rename, a deletion or an `instantiation` flip a CI +failure rather than just a user complaint, and the reason `renamed_from` is mandatory. + +The whole current tree sits under each fixture, so every `validate_system` error fails +`validate_custom` too: fix `validate_system` first. Under `--vendor` it copies only the top-level index +files, `/` and `OrcaFilamentLibrary/`, and picks fixtures by the index's display `name` +(`Bambulab` for `BBL`), not the file stem; fixture presets without that prefix are covered only by an +unscoped run, and it warns `validate_custom checked nothing` when none match. ### `validate_slice` -Slices a two-colour cube on every instantiable printer in the tree, sequentially, forcing the prime tower. -It selects `default_print_profile` and the first `default_filament_profile`, then updates compatibility; -that update can select a different compatible preset. Confirm the intended defaults yourself rather -than treating a passing sweep as proof that those exact presets were sliced. -A printer fails if it cannot be selected, falls back to a Default preset, throws, produces no g-code, or -emits no `CP TOOLCHANGE START`. It cannot be scoped to a filament-only vendor -(`No instantiable printer presets found for vendor OrcaFilamentLibrary`); `check_profile.sh` records it -as SKIP for a vendor with no `machine/` folder. +It slices a two-colour cube on every instantiable printer in the tree, sequentially, forcing the prime +tower. It selects `default_print_profile` and the first `default_filament_profile`, then updates +compatibility; that update can select a different compatible preset. Confirm the intended defaults +yourself rather than treating a passing sweep as proof that those exact presets were sliced. + +A printer fails if it cannot be selected, falls back to a Default preset, throws, produces no G-code, +or emits no `CP TOOLCHANGE START` (`change_filament_gcode` never expanded). Non-default processes and +filaments get no dedicated coverage; [slice them on a copy](#checking-a-copy-of-the-tree). In the +default set, a bundle without a `machine/` folder is recorded as SKIP; naming `validate_slice` +explicitly for it fails (`No instantiable printer presets found for vendor OrcaFilamentLibrary`). The +validator logs `[error]` lines that do not fail a check (such as `could not found extruder_type`); only +each check's PASS or FAIL counts. ## `orca_profile_tool.py check` -`check` is one subcommand of the tool that also owns -`generate-id`, `normalize`, `trim` and `update-index`; see [ids.md](ids.md) for the writing half. +`check` is one subcommand of the tool that also owns `fix-variant`, `generate-id`, `normalize`, +`trim` and `update-index`; [ids.md](ids.md#the-tool) has the writing half. -| Per vendor | Catches | -| --- | --- | -| `check_preset_name_uniqueness` | two files in one bundle claiming one type + name — indexed or not | -| `check_index_coverage` | a file on disk that no `*_list` references (**an error, not a warning**) | -| `check_name_consistency` | an index entry whose `name` disagrees with the file, or whose `sub_path` is missing | -| `check_normalized` | a file `normalize` would rewrite, and an index `update-index` would rebuild | -| `check_filament_compatible_printers` | an instantiated non-library filament with no `compatible_printers` of its own | -| `check_conflict_keys` | `extruder_clearance_radius` alongside `extruder_clearance_max_radius` | -| `check_vector_type_keys` | a vector option written as a scalar (`"filament_type": "PLA"`) | -| `check_filament_id_length` | a declared `filament_id` longer than 8 characters | -| `check_machine_default_materials` | every `default_materials` / `default_filament_profile` name resolves | -| `check_obsolete_keys` | per-key warnings for ignored options; **filament files only** | +| Catches | Scope | Function in the tool | +| --- | --- | --- | +| two files in one bundle claiming one type + name, indexed or not | per vendor | `check_preset_name_uniqueness` | +| a file on disk that no `*_list` references (**an error, not a warning**) | per vendor | `check_index_coverage` | +| an index entry whose `name` disagrees with the file, or whose `sub_path` is missing | per vendor | `check_name_consistency` | +| a file `normalize` would rewrite, an index `update-index` would rebuild | per vendor | `check_normalized` | +| duplicate JSON keys in a file | every file read | the JSON loader | +| an instantiated non-library filament with no non-empty `compatible_printers` of its own | per vendor | `check_filament_compatible_printers` | +| `extruder_clearance_radius` alongside `extruder_clearance_max_radius` | per vendor | `check_conflict_keys` | +| a scalar `filament_type` (`"filament_type": "PLA"`); the five other filament vectors `normalize` arrayifies surface as `normalize would convert to an array` | per vendor | `check_vector_type_keys`, `check_normalized` | +| a variant string the two enums cannot build (a dead variant, a legacy spelling included), a variant list naming one variant twice, an `extruder_type`, `nozzle_volume_type` or `default_nozzle_volume_type` that is not an enum name ([variant names](#variant-names)) | per vendor | `check_variant_names` | +| a variant array not exactly `variant length × stride` wide in a selectable preset that writes it (with `--strict`, also in one it reaches); machine variant layout keys that disagree; a process id array that does not pair each variant ([variant arrays](#variant-arrays)) | per vendor | `check_variant_arrays` | +| a declared `filament_id` longer than 8 characters | per vendor | `check_filament_id_length` | +| a `default_materials` name, or a `default_filament_profile` name, matching no filament file ([below](#default-material-references)) | per vendor | `check_machine_default_materials` | +| per-key warnings for ignored options, **filament files only** | per vendor | `check_obsolete_keys` | +| `setting_id` uniqueness, every `filament_id` rule, and `machine_model` names duplicated across bundles | **tree-wide, ignoring `--vendor` entirely** | `check_setting_id_uniqueness`, `check_filament_ids`, `check_machine_model_name_uniqueness` | -Tree-wide, **ignoring `--vendor` entirely**: `check_setting_id_uniqueness` and `check_filament_ids`. So a -vendor-scoped run can and does fail on another vendor's files — and it saves seconds, not minutes. +Because the id and model-name checks stay tree-wide, a vendor-scoped run can and does fail on another +vendor's files, and it saves seconds, not minutes. Unscoped, the per-vendor pass covers every bundle. The only exclusion is the stray `user/` directory -(see below); `OrcaFilamentLibrary` is held to the same rules as any vendor, its sole exemption being -that a library filament may leave `compatible_printers` empty — exactly what -`check_filament_compatible_printers` allows. `check_normalized` covers every bundle with an index. +(below); OrcaFilamentLibrary is held to the same rules as any vendor, its sole exemption being that a +library filament may leave `compatible_printers` empty. `check_normalized` covers every bundle with an +index. Notes that matter: -- Exit codes: **0** clean, **1** errors found, **2** argparse misuse. Warnings never change the exit code. -- A nonexistent `--vendor` is a hard error — `[ERROR] unknown vendor "" in `, exit 1. -- `--vendor ""` means all vendors; `check_profile.sh` relies on that. `--vendor` is repeatable. -- A **stray directory** under `resources/profiles/` still gets counted as a vendor by the per-vendor pass - and warned about (`No profiles found for vendor: at …/.json`, and the "Checked vendors" count - goes up by one). The one exception is `user/`, the validator's data dir, which an unscoped `check` - skips by name; `--vendor user` still checks and warns about it. Warnings never change the exit code. - `normalize`, `trim` and `update-index` ignore strays too — they define a bundle as *a directory with a +- Exit codes: **0** clean, **1** errors found, **2** argparse misuse. Warnings never change the exit + code. +- A nonexistent `--vendor` is a hard error: `[ERROR] unknown vendor "" in `, exit 1. +- `--vendor ""` means all vendors; `check_profile.sh` relies on that. `--vendor` is repeatable + (`check --vendor A --vendor OrcaFilamentLibrary`); `check_profile.sh` takes one. +- A **stray directory** under `resources/profiles/` still gets counted as a vendor by the per-vendor + pass and warned about (`No profiles found for vendor: at …/.json`, and the "Checked + vendors" count goes up by one): usually an emptied folder, or a `user/` left by a direct validator + run. An unscoped `check` skips `user/` by name; `--vendor user` still checks and warns about it. + `normalize`, `trim` and `update-index` ignore strays too: they define a bundle as *a directory with a matching index file*. - Each remedy is printed once for the whole run, not once per file, as a `[WARNING]` under the errors - ("2 unreferenced file(s) above: delete them, or run … update-index"). Read those lines: they name the + (`2 unreferenced file(s) above: delete them, or run … update-index`). Read those lines: they name the command that fixes the batch. -- The trailing summary always suggests `normalize`. That is right for the shape errors and misleading for - everything else — an id error needs `generate-id`, a dangling `default_materials` needs a human. +- When there are errors or warnings, the trailing summary suggests `normalize`. That is right for the + shape errors and misleading for everything else: an id error needs `generate-id`, a dangling + `default_materials` needs a human. +- Other options: `--dry-run` on every writing command, `--profiles DIR` to point any command at another + tree, `--profile-type` to narrow `normalize`, `trim` and `update-index` to one type + ([ids.md](ids.md#the-tool)). - `resources/profiles/check_unused_setting_id.py` is a legacy BBL-only diagnostic, not part of profile CI. Use `orca_profile_tool.py check` for current id validation. -### Obsolete-key diagnostics +### Obsolete keys -`check` always reports per-key warnings for obsolete options in filament profiles. -The normalization check also rejects obsolete keys across preset types; `normalize` removes them. +`check` always reports per-key warnings for obsolete options in filament profiles. Its normalization +check also rejects obsolete keys across all preset types (`normalize would remove `); `normalize` +removes them. ### Default-material references -The materials check finds `default_materials` / `default_filament_profile` entries naming a preset -that does not exist. The three authoring errors it surfaces are `,` instead of `;`, wrong case -(`@system`), and a whole `;`-joined string stuffed into one array element. +The materials check finds `default_materials` / `default_filament_profile` entries naming a preset that +does not exist. It reads each `machine/` file's own key (a model's `default_materials`, a variant's +`default_filament_profile`; a file that writes both is checked on `default_materials` only) and accepts +any `name` found in the vendor's or OrcaFilamentLibrary's `filament/` files, bases and unindexed files +included. The three authoring errors it surfaces are `,` instead of `;`, wrong case (`@system`), and a +whole `;`-joined string stuffed into one array element. Only the validator (`validate_system`) requires +an instantiated system filament that is compatible with each variant. + +### Variant arrays + +`check_variant_arrays` composes every selectable preset the loader's way (the parent, then each +`include` in order, then the file's own keys; a filament's `inherits` may fall through to +OrcaFilamentLibrary) and holds each key of [the four variant sets](extruder-variants.md#the-four-key-sets) +that the preset writes itself to exactly its `variant length × stride` +([widths](extruder-variants.md#widths)). The variant length is the length of the composed preset's +own `*_extruder_variant` list; without one, a machine's is the number of variants its +`extruder_variant_list` offers, else its extruder count (the list's default is one +`Direct Drive Standard` per extruder), and a process's or filament's is 1. Any other width is an +error, one value included and even when every value is the same. A key the preset does not write +takes what reaches it, the default or an array it inherits or includes, which the loader resizes; it +is not checked. A base is not judged on its own: what it writes counts only where it reaches a preset +that does not override it. + +`check --strict` also holds every selectable preset to its own width for each key that reaches it, +so a preset whose variants differ from those of the file its array comes from restates the array +(the error names that file). That is BBL's practice and the target for new printer-specific presets; +CI runs `check` without `--strict`. + +An id array that reaches a selectable preset, `printer_extruder_id` or `print_extruder_id`, written or +inherited, must have one entry per entry of its variant list on any printer. This rule and the +machine layout rules below judge the composed preset without `--strict`, whichever file writes the +keys. Beside a written variant list this rule reports it instead of the width +rule, so it is reported once. A process that +lists variants without `print_extruder_id` gets a **warning** when a variant repeats (every entry then +reads as extruder 1, so the repeated variant is unreachable), nothing otherwise. + +On a machine the layout keys are held to [Printer rules 1–4](extruder-variants.md#printer-machine), +every failure an error unless marked: + +- With `extruder_variant_list` written: the list has one entry per extruder, as many as + `nozzle_diameter`; every variant starts with its extruder's `extruder_type`; + `default_nozzle_volume_type` names a nozzle volume type that extruder lists; + `printer_extruder_variant` is the list flattened extruder-major and `printer_extruder_id` gives each + entry its 1-based extruder (an id array left out reads as extruder 1 everywhere, which passes when + those are the flattening's ids). Without the pair, the list may offer one variant in total. +- With the pair written and no `extruder_variant_list`: one variant per extruder at most. A pair that + `single_extruder_multi_material` off would replace with the default at load is a **warning**; a pair + the rebuild would leave as it is passes. + +It does **not** see a base's own resize: it composes at the width each file wrote, so an array wider +than a base's list, which the loader cuts before any child inherits it, passes even with `--strict` +([composition](extruder-variants.md#padding-truncation-and-composition)). Nor does it see per-extruder +vectors outside the sets (`extruder_offset`, `printer_extruder_options`, …), which no variant list +sizes. What a variant holds (a High Flow variant copied from Standard, a variant inserted at the wrong +index) is review work +([item 14](review-checklist.md#14-per-extruder-vectors-not-checked-and-variant-arrays-widths-and-layout-checked)); +whether it is a name the engine can select at all is `check_variant_names`'. + +`python3 scripts/orca_profile_tool.py fix-variant` resizes every array the width rule rejects in the +selectable preset that writes it, leaves bases alone and adds no key: extra values are dropped, missing ones +repeat the last value (the last normal/silent pair at stride 2; a lone value fills normal and silent +alike). It leaves the variant lists and id arrays to you, since they address the variants rather than +fill them. `fix-variant --strict` then also writes each key that reaches a selectable preset at +another width: into the most general file on the way down to the preset whose own width is the +preset's and whose selectable presets taking it all need that width, else into the preset itself. +Presets of every bundle count towards that agreement; `--vendor` limits the files written and +`--dry-run` previews. The loader pads with the first value where `fix-variant` repeats the last, so a +padded array need not load as before, and +trimming deletes values: when the extra values were meant as per-extruder or per-variant values, +declare the variant layout instead ([Printer rule 2](extruder-variants.md#printer-machine)) and keep +them. `fix-variant` moves no value, so a family whose presets all wrote one value repeats the widened +array in each; put it on the family's base afterwards ([shared bases](shared-bases.md)). + +### Variant names + +`check_variant_names` reads the four list keys plus `extruder_type`, `nozzle_volume_type` and +`default_nozzle_volume_type` of every preset the bundle's index references, bases included, and holds +each entry to the names the engine's two enum maps define (`s_keys_map_ExtruderType`, +`s_keys_map_NozzleVolumeType`, read from `PrintConfig.cpp` on every run). The bundle's own files are +judged, not the composed config: a bad string is the writing file's error, once. Every finding is an +error, and no bundle is exempt: BBL, whose bundle is imported from BambuStudio, is held to OrcaSlicer's +enums like any other. + +- A variant string outside ` ` is a **dead variant**: it still + counts toward the variant length the arrays are sized by, so the values written for it silently never + reach the G-code. `Hybrid` too, which is runtime-only, and an empty entry. A name BambuStudio's enum + has and OrcaSlicer's lacks is dead here as well, and passes with no tool change once the engine gains + that nozzle volume type. +- A legacy name the loader still rewrites in these keys (`Normal` → `Standard`, `Big Traffic` → + `High Flow`) is an error that names the enum name to write; the profile has to spell the enum + name. `DirectDrive` is only rewritten in `extruder_type`, so a variant string carrying it is dead. +- A variant list naming one variant twice is an error: the lookup returns the first equal string, so + the repeat is unreachable and its value sits at an index no extruder reads. A filament list takes + strings, `extruder_variant_list` takes them per extruder, and a process takes `(extruder id, variant)` + pairs — one string on two extruders is two pairs, not a repeat. +- An `extruder_type`, `nozzle_volume_type` or `default_nozzle_volume_type` value that is not an enum + name is an error: they are enum options, so an unknown value fails the validator's load of the + whole bundle, while the app silently loads the option's default instead. A legacy spelling + (`DirectDrive`, `Normal`, `Big Traffic`) and `Hybrid`, an enum value no profile writes, are errors + too. + +The variant *order*, the choice of variants, and the values themselves are not checked. ### `normalize` and `update-index` are part of the check -`check` fails when either command would still change something, so they are not optional polish — the +`check` fails when either command would still change something, so they are not optional polish: the file that gets reviewed has to be the file that ships. What `normalize` changes is narrow and fixed: -adds a missing `type`, deletes a `version` or `is_custom_defined` key from a *preset* file, deletes six -print-speed keys from filament profiles (`initial_layer_print_speed`, `outer_wall_speed`, -`inner_wall_speed`, `infill_speed`, `top_surface_speed`, `travel_speed`), deletes the -obsolete keys in `PrintConfigDef::handle_legacy`'s `ignore` set across preset types, resolves the -`extruder_clearance_*` conflict pair by keeping the larger, arrayifies five filament options besides -`filament_type`, and hoists `type`, `name`, `renamed_from`, `inherits`, `from`, `setting_id`, -`filament_id`, `instantiation` to the front. A file it changes is then rewritten whole — tab-indented, -LF, one trailing newline, keys reordered. + +- adds a missing `type`; +- deletes a `version` or `is_custom_defined` key from a *preset* file; +- deletes six print-speed keys from filament profiles (`initial_layer_print_speed`, `outer_wall_speed`, + `inner_wall_speed`, `infill_speed`, `top_surface_speed`, `travel_speed`); +- deletes the obsolete keys the loader ignores (the `ignore` set in `PrintConfigDef::handle_legacy`), + across preset types; +- resolves the `extruder_clearance_*` conflict pair by keeping the larger; +- arrayifies six filament options (`filament_type`, `filament_cost`, `filament_density`, + `temperature_vitrification`, `filament_max_volumetric_speed`, `filament_vendor`); +- hoists `type`, `name`, `renamed_from`, `inherits`, `from`, `setting_id`, `filament_id`, + `instantiation` to the front. + +A file it changes is then rewritten whole: tab-indented, LF, one trailing newline, keys reordered. A +file committed with CRLF line endings therefore changes on every line; read the diff before committing +it. **Set `type` explicitly when authoring.** For a file in `machine/` without it, normalization guesses -`machine` only if its name contains `nozzle`, otherwise `machine_model`. That heuristic cannot -reliably classify shared machine bases or unusually named variants. +`machine` only if its name contains `nozzle` (case-insensitive), otherwise `machine_model`. That +heuristic cannot reliably classify shared machine bases or unusually named variants. -The Python obsolete-key set is checked against the C++ source by a unit test. Active options -and legacy aliases that the loader migrates (such as `extruder_type` and -`extruder_clearance_max_radius`) are preserved. +The tool's obsolete-key set is checked against the loader's ignore list by a unit test. Active options +are preserved, including live keys whose *values* the loader rewrites (`extruder_type`: `DirectDrive` → +`Direct Drive`; the variant-string keys: `Normal` / `Big Traffic` → `Standard` / `High Flow`), and so are +legacy key names the loader migrates (such as `extruder_clearance_max_radius`). Two things it therefore does **not** enforce: - **Formatting and key order on their own.** A file with none of those problems is skipped entirely, so 4-space indent, a missing trailing newline, and a file that leads with `compatible_printers` all pass - `check`. They stay latent until something else trips `normalize` and the whole file reformats inside an - unrelated diff. (`normalize --force` rewrites every file, which is not something to run on a shipped - bundle.) + `check`. They stay latent until something else trips `normalize` and the whole file reformats inside + an unrelated diff. (`normalize --force` rewrites every file; do not run it on a shipped bundle.) - **A misspelled setting key.** `inital_layer_height` and `sparse_infill_densiti` pass `check` cleanly. - Verify new keys against `PrintConfig.cpp` and `PrintConfigDef::handle_legacy`. + Verify new keys against `src/libslic3r/PrintConfig.cpp` and the loader's legacy handling + (`PrintConfigDef::handle_legacy`: renamed keys, rewritten values and ignored keys). + +`check` does not catch a dangling `default_print_profile` either; check that name by hand. ## The validator binary -Built from `src/dev-utils/OrcaSlicer_profile_validator.cpp` (`-DORCA_TOOLS=ON`). -Both scripts find a local build under `build*/` — `check_profile.sh` tries Release, RelWithDebInfo, then -Debug, and `check_profile.ps1` adds MinSizeRel — else they download the nightly into the -`validator` subdirectory of the per-user cache dir (see above). Pass `--download` / `-Download` to -match CI exactly, since a stale local build is used silently. Windows looks for +Built from `src/dev-utils/OrcaSlicer_profile_validator.cpp` with `-DORCA_TOOLS=ON`. Both scripts use a +local build under `build*/` when one exists, else they download the nightly into the `validator` +subdirectory of the cache dir. `check_profile.sh` searches Release, then RelWithDebInfo, then Debug +(each under `build*/src/` and `build*/*/src/`), then single-config `build*/src`, and +prefers a host-architecture build tree; `check_profile.ps1` tries Release, RelWithDebInfo, MinSizeRel, +then Debug. A stale local build is used silently; `--download` / `-Download` skips local builds and uses the +nightly. The download and the fixtures stay cached until `--refresh` / `-Refresh`, so +`--download --refresh` (`-Download -Refresh`) matches CI exactly. Windows looks for `OrcaSlicer_profile_validator.exe`. -If your build lives somewhere else entirely, point at it with `--validator` / `-Validator`, or set +If your build lives somewhere else, point at it with `--validator` / `-Validator`, or set `ORCA_PROFILE_VALIDATOR` (`$env:ORCA_PROFILE_VALIDATOR` in PowerShell). | Flag | Meaning | @@ -167,11 +330,12 @@ If your build lives somewhere else entirely, point at it with `--validator` / `- | `-l ` | log level; CI uses 2 | | `-v ` | load only that vendor **plus** OrcaFilamentLibrary | | `-s` | slice sweep | +| `-o ` | with `-s`, save each printer's G-code there | | `-f` | no-op (see above) | | `-g 1` | regenerate user-preset fixtures; takes a value, and wipes the user preset dir first | -On ARM64 Linux the nightly is x86-64 only — the script warns and downloads anyway, producing a binary -that will not run. Build it locally instead. +On ARM64 Linux the nightly is x86-64 only: the script warns and downloads anyway, producing a binary +that will not run. Build it locally with `-DORCA_TOOLS=ON` and pass `--validator`. Running the validator directly uses the profile tree as its data directory and can create `user/` there. Prefer the wrappers, which stash existing user presets and restore them afterward. After a @@ -185,16 +349,27 @@ Use `--profiles DIR` on the Python tool and `-p DIR` on the validator. The wrapp ```bash ./scripts/check_profile.sh --profiles "" +# Windows: scripts\check_profile.bat -ProfilesDir "" ``` -On Windows use `scripts\check_profile.bat -ProfilesDir ""`. +To slice a process or filament that is not a printer's default, or to read the G-code, work on a copy: +copy `resources/profiles` and `resources/info` into one scratch dir (the validator reads `info/` next to +the tree), point the printer's `default_print_profile` or first `default_filament_profile` at the preset +in the copy, and run the validator with `-o`: + +```bash + -p /profiles -v "" -s -o +``` + +Each printer's G-code is saved as `__.gcode`; its embedded config +(`; print_settings_id = …`, `; filament_settings_id = …`) shows what was actually sliced. ## Testing in the app -Editing this checkout's `resources/profiles` does not update a separately installed application. -Test with a build using the edited resources and a bumped bundle version; the updater installs newer -bundles under `/system/`, and the preset cache also depends on the bundle version. -Use Help ▸ Show Configuration Folder to locate the active data directory: +Editing this checkout's `resources/profiles` does not update a separately installed application. Test +with a build using the edited resources and a bumped bundle version: the updater installs newer bundles +under `/system/`, and the preset cache also depends on the bundle version. Use Help ▸ Show +Configuration Folder to locate the active data directory: | Platform | Default data directory | | --- | --- | @@ -202,58 +377,71 @@ Use Help ▸ Show Configuration Folder to locate the active data directory: | Linux | `$XDG_CONFIG_HOME/OrcaSlicer`, or `~/.config/OrcaSlicer` when unset | | Windows | `%APPDATA%\OrcaSlicer` | -A portable `data_dir` next to the executable takes precedence. Use a separate test configuration -for a clean-install check; preserve the normal configuration and user presets. - -## Cross-platform paths - -Match the exact case of each `sub_path` and asset filename; Linux filesystems commonly distinguish -case even when a macOS or Windows checkout does not. Preset-name references are case-sensitive -on every platform. Avoid Windows-invalid characters (`< > : " | ? *`), reserved device names -such as `CON` / `NUL` (including with extensions), and trailing spaces or dots in path components. -Keep stems tidy too, but a space immediately before `.json` is not a trailing path-component space. +A portable `data_dir` next to the executable takes precedence. Use a separate test configuration for a +clean-install check; preserve the normal configuration and user presets. ## Error → remedy | Message | Fix | | --- | --- | -| `can not find inherits for ` | parent missing, unregistered, or listed **after** the child | -| `can not find filament_id for ` | nothing in the chain declares one — run `generate-id` | -| `can not find parent for config !` | a shipped name disappeared — add `renamed_from` | -| `Missing instantiation attribute for ` | key absent **or** not the string `"true"`/`"false"` | +| `can not find inherits for ` | parent missing, unregistered, misspelled, or listed **after** the child | +| `can not find include` | the template is misspelled, registered after the includer, or selectable | +| `can not find filament_id for ` | nothing in the chain declares one: run `generate-id` | +| `can not find parent for config !` | a shipped name disappeared: add `renamed_from` | +| `Failed loading configuration file ` | that file could not be loaded and the whole bundle was discarded: a JSON error, or a value its option cannot take, such as `nil` in a non-nullable key (`Invalid value provided for parameter : nil`, `Deserializing nil into a non-nullable object`); the lines above it name the cause | +| `Missing instantiation attribute for ` | key absent **or** not the string `"true"` / `"false"` | | `contains incorrect keys: , which were removed` | a key valid for a different preset type | -| `defines invalid printer variant ""` | not in the model's `nozzle_diameter` list | -| `has printer_variant "" that does not match its nozzle_diameter` | the set comparison in [machine-profiles.md](machine-profiles.md) | -| `references unknown compatible_printers "

"` | the printer was renamed or deleted; fix the reference | +| `defines invalid printer variant ""` | not a token of the model's `nozzle_diameter` list | +| `has printer_variant "" that does not match its nozzle_diameter` | [the set comparison](machine-profiles.md#printer_model-and-printer_variant) | +| `references unknown compatible_printers "

"` | the printer was renamed or deleted, or a `machine_model` name was used instead of a variant name: fix the reference. Under `--vendor`, usually another vendor's printer ([why](#the-five-checks)) | | `references renamed compatible_printers "" (now "")` | in-tree references must name the current preset; `renamed_from` does not excuse them | -| `Filament preset "" is missing compatible_printers setting` | non-library filaments need a non-empty list in their **own** file — the flattened-vs-own-key trap is in [filament-profiles.md](filament-profiles.md#compatible_printers) | -| `Ambiguous AMS filament match: N presets share filament_id "X" … printer "Y"` | make the lists disjoint by [specificity](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product) — the specialized profile keeps the variant, the general ones drop it; prefer this over deleting a profile — or fix an `inherits` pointing at another material's `@base`. `orca_profile_tool.py check` does not catch this; only `validate_system` here does | -| `Layer height cannot exceed nozzle diameter.` / `Line width too small` | `Print::validate()` flow rules | +| `Filament preset "" is missing compatible_printers setting` | non-library filaments need a non-empty list in their **own** file; the resolved-vs-own-key trap is in [filament-profiles.md](filament-profiles.md#compatible_printers) | +| `Ambiguous AMS filament match: N filament presets share filament_id "X" and are all compatible with printer "Y"` | make the lists disjoint by [specificity](filament-profiles.md#overlapping-coverage-one-variant-one-profile-per-product): the specialized profile keeps the variant, the general ones drop it; prefer this over deleting a profile. Or fix an `inherits` pointing at another product's `@base`. `orca_profile_tool.py check` does not catch this; only `validate_system` does | +| `Layer height cannot exceed nozzle diameter.` / `Line width too small` / `Line width too large` | the [slicing limits](process-profiles.md#values-to-review-per-nozzle) | | `[ERROR] … no .json list references it, so it never loads` | `update-index`, or delete the file | -| `[ERROR] … references it and it declares no profile type` | set the correct `type` explicitly, then `normalize` and `update-index` | +| `[ERROR] … no .json list references it and it declares no profile type` | set the correct `type` explicitly, then `normalize` and `update-index` | | `[ERROR] … normalize would ` / `.json: update-index would rebuild ` | run that command and commit the result | | `[ERROR] has N profiles named ""` | identify the intended preset and remove or rename the duplicate; use `trim --dry-run` only for deliberate unindexed-file cleanup | -| `[ERROR] … must not have a setting_id` / `is missing a setting_id` | `generate-id --setting-id` | -| `inherits filament_id "X" but its own triple … mints "Y"` | `generate-id` will **not** fix this — see [ids.md](ids.md) | -| `vendor 's config version: invalid` | the `version` string is not Semver-parseable | -| `[json.exception.type_error.302] type must be string` | locate the non-string value in the index or model; see [failure scopes](vendor-bundle.md#failure-modes-ranked-by-blast-radius) | -| `Printer "

" fell back to a default preset` | final process or filament selection is a generic Default preset; check named defaults, visibility and available compatible presets. An incompatible default may instead be replaced without this error | -| `Printer "

" sliced but the filament change never fired` | `change_filament_gcode` never expanded | +| `Duplicate key error in : Duplicate key detected: ` | a key written twice in one file; keep the intended one | +| `… must not have a setting_id` / `… is missing a setting_id` / `setting_id "X" in does not match the expected "Y" …` | `generate-id --setting-id` (by hand in `BBL/`, see [ids.md](ids.md#bbls-exception-precisely)) | +| `filament_id "X" declared by … does not match the mint of its triple …` | `generate-id --filament-id`; if the id should not be declared here at all, remove it so the preset inherits its root's | +| `inherits filament_id "X" but its own triple "V/T/N" mints "Y"` | `generate-id` will **not** fix this; see [ids.md](ids.md#what-generate-id-does-and-does-not-fix) | +| `"" has N values for variant length S at stride k, which takes M` (with ` (no , so …)` after `S`, naming where `S` came from, when the preset writes no list, and ` (it comes from )` at the end under `--strict` for an array the preset does not write) | exactly `S × k` values in variant order, or leave the key out ([widths](extruder-variants.md#widths)); on a list-less multi-extruder printer whose extruders differ, declare the layout; `fix-variant` cuts or pads to that width ([variant arrays](#variant-arrays)); an `S` you did not expect means the variant list did not resolve through `include` or `inherits` | +| `printer_extruder_variant […] is not extruder_variant_list flattened extruder-major […]` / `printer_extruder_id […] does not give each entry of printer_extruder_variant its 1-based extruder […]` / `printer_extruder_id has N entries for the M entries of printer_extruder_variant` | write the pair as the flattening of the list, ids in step ([Printer rule 2](extruder-variants.md#printer-machine)) | +| `extruder_variant_list has N entries for M extruder(s)` / `extruder_variant_list entry i "…" holds a variant that does not start with extruder i's extruder_type` / `default_nozzle_volume_type "…" is not a nozzle volume type extruder i lists` | [Printer rules 1, 3 and 4](extruder-variants.md#printer-machine) | +| `extruder_variant_list offers N variants but the preset writes no printer_extruder_variant/printer_extruder_id` / `printer_extruder_variant lists several variants for extruder N but the preset writes no extruder_variant_list` / `[WARNING] … with single_extruder_multi_material off the loader replaces printer_extruder_variant …` | write all three layout keys ([Printer rule 2](extruder-variants.md#printer-machine)) | +| `print_extruder_id has N entries for the M entries of print_extruder_variant` / `[WARNING] … print_extruder_variant repeats a variant but print_extruder_id is absent` | one id per variant entry, mirroring the printer's pairs ([Process rule 1](extruder-variants.md#process)) | +| ` holds "…", which no extruder can select: "…" is not a nozzle volume type the enum has (…)` / `… it does not start with an extruder type the enum has (…)` / `… is empty` / `… Hybrid names the sub-nozzles of one hybrid extruder at runtime` | write a legal variant string, ` ` from the two enums ([variant names](#variant-names), [variant strings](extruder-variants.md#variant-strings)); in every bundle, BBL included | +| `… holds the legacy variant "…"` / `extruder_type spells the legacy name "…"` / `nozzle_volume_type spells the legacy name "…"` / `default_nozzle_volume_type spells the legacy name "…"` | write the enum name the message gives: the loader still rewrites the legacy one, but `check` rejects it | +| ` lists "…" N times` / `print_extruder_variant lists the pair (extruder N, "…") N times` | drop the repeat and its value from every variant array: the lookup returns the first equal string | +| `extruder_type "…" is not one of (…)` / `nozzle_volume_type "…" is not one of (…)` / `default_nozzle_volume_type "…" is not one of (…)` / `… names "Hybrid", which the engine computes for a hybrid extruder at runtime` | they are enum options, so an unknown value fails the validator's load of the whole bundle and silently becomes the default in the app; use `s_keys_map_ExtruderType` / `s_keys_map_NozzleVolumeType`, `Hybrid` excepted ([variant strings](extruder-variants.md#variant-strings)) | +| `[WARNING] No profiles found for vendor:

` | a directory with no matching index (an emptied folder, or a `user/` left by a direct validator run); remove it | +| `… has no compatible system filament in its model's "default_materials"` | add a system filament preset compatible with that variant to the model's `default_materials` | +| `… names the unknown system filament "" in its "default_materials"` / `… "default_filament_profile"` | name an existing system (not user, not base) filament exactly; `;` separators, exact case | +| `Missing filament profile: '' referenced in ` | the same, caught by `check`; usual causes are `,` instead of `;`, wrong case (`@system`), or a `;`-joined list packed into one array element | +| `machine_model name "" is declared by N bundles` | model names are unique across the tree; rename the new model | +| `vendor 's config version: invalid` | the `version` string does not parse; write `MM.mm.pp.bb` | +| `[json.exception.type_error.302] type must be string` | locate the non-string value in the index or a model; see [failure scopes](vendor-bundle.md#failure-scopes) | +| `Printer "

" fell back to a default preset` | the final process or filament selection is a generic Default preset: check the named defaults, their visibility and that compatible presets exist. An incompatible default may instead be replaced without this error | +| `Printer "

" sliced but the filament change never fired (no CP TOOLCHANGE START)` | `change_filament_gcode` never expanded | ## CI -`.github/workflows/check_profiles.yml`, job **"Check profiles"**, on `pull_request` into `main` or -`release/*`, paths `resources/profiles/**`, `resources/printers/**`, `scripts/**` and the workflow itself. -There is no push trigger — a direct push to main runs no profile validation. +`.github/workflows/check_profiles.yml`, job **"Check profiles"**, runs on `pull_request` into `main` or +`release/*` touching `resources/profiles/**`, `resources/printers/**`, `scripts/**`, +`src/libslic3r/PrintConfig.cpp` (where the tool reads the variant key sets) or the workflow itself. +There is no push trigger: a direct push to main runs no profile validation. -The job opens with `python3 -m unittest discover -s scripts/tests -t scripts`, the tool's own unit -tests. That step is deliberately **not** `continue-on-error`: a broken tool makes everything it then says -about the profiles worthless. Every check after it is `continue-on-error` with a final gate, so one run -reports all five results. On failure a second workflow posts or replaces a single PR comment marked -``, with each failing log truncated to 30 KB; it deletes the comment -once the run is green. +The job opens with `python3 -m unittest discover -s scripts/tests -t scripts`, the tool's own unit tests +(run them locally after changing `scripts/`, with `py -3` on Windows, and keep `-t scripts` or the +imports fail). That step is deliberately **not** `continue-on-error`: a broken tool makes everything it +then says about the profiles worthless. Every check after it is `continue-on-error` with a final gate, +so one run reports all five results. On failure a second workflow posts or replaces a single PR comment +marked ``, holding the start of each failing log (30 KB per check, +12 KB per `validate_custom` fixture; reproduce locally for the full list); it deletes the comment once +the run is green. The job name is also the required check for the delegated-merge bot, which lets a vendor maintainer -self-merge a `resources/profiles//` PR with no human review — so whatever CI does not check -is what ships unreviewed. Its denied patterns refuse `^scripts/` and any `.py`, so a PR that touches the -tooling always needs a maintainer. +self-merge a PR limited to their own `resources/profiles//` folder with no human review, so +whatever CI does not check is what ships unreviewed. Its denied patterns refuse `^scripts/` and any +`.py`, so a PR that touches the tooling always needs a maintainer. diff --git a/.claude/skills/orca-profiles/references/vendor-bundle.md b/.claude/skills/orca-profiles/references/vendor-bundle.md index 29aac13331..d6c7710469 100644 --- a/.claude/skills/orca-profiles/references/vendor-bundle.md +++ b/.claude/skills/orca-profiles/references/vendor-bundle.md @@ -1,7 +1,7 @@ -# The vendor bundle and the loader +# Vendor bundles -A bundle is `resources/profiles/.json` (the index) plus `resources/profiles//`. -The **vendor id is the filename stem**, not the `name` inside — several differ (`BBL.json` is named +A bundle is `resources/profiles/.json` (the index) plus `resources/profiles//`. The +**vendor id is the filename stem**, not the `name` inside; the two may differ (`BBL.json` is named "Bambulab"). Asset paths and the `setting_id` formula use the id; the `validate_custom` fixture prefix uses the `name`. @@ -13,16 +13,16 @@ uses the `name`. "version": "02.04.00.03", "force_update": "0", "description": "Phrozen configurations", - "machine_model_list": [ { "name": "...", "sub_path": "machine/....json" } ], - "machine_list": [ ... ], - "process_list": [ ... ], - "filament_list": [ ... ] + "machine_model_list": [ { "name": "Phrozen Arco", "sub_path": "machine/Phrozen Arco.json" } ], + "machine_list": [ … ], + "process_list": [ … ], + "filament_list": [ … ] } ``` -The loader reads `name`, `version`, `url` and the four `*_list` arrays. -`description` is only logged. `force_update` is read by `PresetUpdater`, never by the loader. -`sub_path` is relative to the **vendor folder**. +The loader reads `name`, `version`, `url` and the four `*_list` arrays. `description` is only logged; +`force_update` is read by the profile updater, never by the loader. `sub_path` is relative to the +**vendor folder**. | List | Holds | | --- | --- | @@ -35,141 +35,180 @@ The loader reads `name`, `version`, `url` and the four `*_list` arrays. 1. **Everything is registered, bases included.** Every preset file on disk has exactly one entry in the matching list, and no unindexed preset file is left in the tree. -2. **Parents before children.** `inherits` resolves against a per-kind map filled as the list is walked - (`configs.clear()` then process, filaments, printers). A parent listed after its child produces - `can not find inherits for ` and the bundle is discarded. -3. **The index entry's `name` must equal the `name` inside the sub_path file.** `check_name_consistency` - walks the index looking for the files; `check_index_coverage` walks the files looking for them in the - index. The `renamed_from` escape hatch `check_name_consistency`'s docstring promises is commented out. +2. **Parents before children, includes before includers.** The lists load processes first, then + filaments, then printers, each in index order, and `inherits` and `include` resolve only against + presets of that type already loaded from it. A parent + listed after its child produces `can not find inherits for ` and the bundle is + discarded; an include listed after its includer is `can not find include`, a counted error that + leaves the includer without those keys. +3. **The index entry's `name` equals the `name` inside the `sub_path` file.** `renamed_from` does not + excuse a mismatch. -All three are `check` errors now, and `update-index` writes an index that satisfies all three from the -files on disk — including the parents-first ordering, by topological sort. Hand-editing the index is +All three are `check` errors, and `update-index` writes an index that satisfies all three from the +files on disk, including the dependency ordering (parents and templates before the presets that use +them, then, in name order, entries that neither depend on nor are depended on by another entry of their own +list, and any entry on a dependency cycle). Hand-editing the index is fine for a one-line addition, but the committed result must equal what `update-index` writes, because `check` compares them. -The loader itself reports none of this: an unregistered file, or an entry with a typo'd key -(`"subpath"`), is silently dropped. (A typo'd `sub_path` is a `check` error naming the entry.) +The loader itself reports none of this: an unregistered file, or an entry with a misspelled key +(`"subpath"`), is silently dropped. (A misspelled `sub_path` value is a `check` error naming the entry.) -`BBL/cli_config.json` and `BBL/filament/filaments_color_codes.json` are auxiliary data loaded by path, -not presets. The tool's `NON_PROFILE_FILES` excludes these basenames from preset maintenance. +`BBL/cli_config.json` and, in `BBL/filament/`, `filaments_color_codes.json`, `filament_id_map.json`, +`filament_name_map.json` and `support_recommended_params.json` are auxiliary data files read by path, +not presets. The last three carry a `type` key and look like presets; the tool excludes all five from +preset maintenance. ## `version` -Parsed by a four-component Semver where the 4th is folded in as `patch = patch*100 + value`. Write it -zero-padded, `MM.mm.pp.bb`; a couple of bundles drop a component or the padding, but do not imitate them. +Four components, `MM.mm.pp.bb`, compared as a version number in which the fourth is folded into the +third (`patch × 100 + build`). Write all four components, zero-padded. -- **Bump the version for every bundle the PR touches.** `PresetUpdater` installs bundled resources - only when their version is newer than the installed version; the `.opc` preset cache is also - versioned. Nothing in profile CI checks the bump. -- **Keep the last component ≤ 99.** `02.04.00.100` and `02.04.01.00` both parse to `2.4.100`. A bundle - that reaches `.99` carries into the third component (`02.03.02.99` → `02.03.03.00`). -- An **absent** version is worse than a stale one: the validator still passes, but `Semver::valid()` - excludes `0.0.0`, so the vendor is dropped from the configuration wizard entirely and the preset cache - is disabled for it. An *unparseable* version is not silent — it throws and discards the whole bundle - (see the failure table below). +- **Bump the version for every bundle the change touches.** The app installs bundled profiles only + when their version is newer than the installed one, and the `.opc` preset cache is also keyed on + the version. Nothing in profile CI checks the bump. +- **Keep the last component ≤ 99.** `02.04.00.100` and `02.04.01.00` both read as + `2.4.100`. A bundle that + reaches `.99` carries into the third component (`02.03.02.99` → `02.03.03.00`). +- An **absent** version is worse than a stale one: it reads as `0.0.0`, which is not a valid version. + `check` and the validator still pass, but the vendor is dropped from the setup wizard entirely and gets no preset cache. Confirm the key exists. An + *unparseable* version is not silent: it discards the whole bundle (`vendor 's config version: + invalid`). ## Common preset keys | Key | Value | | --- | --- | -| `type` | `machine_model` / `machine` / `process` / `filament` | -| `name` | the preset name; the filename is *not* authoritative | -| `inherits` | the parent's exact `name` — no path, no `.json` | +| `type` | `machine_model`, `machine`, `process` or `filament` | +| `name` | the preset name, the identity every reference uses; the filename is *not* authoritative | +| `inherits` | the parent's exact `name`: no path, no `.json` | +| `include` | a template's exact `name`, or an array of them, layered under this preset's own keys ([below](#inherits-and-include)) | | `instantiation` | the **string** `"true"` (selectable) or `"false"` (base) | -| `from` | `"system"` by convention; the vendor loader never reads it | -| `setting_id` | required on instantiated presets, forbidden on bases — generated | -| `renamed_from` | `;`-separated list of old names this preset supersedes | +| `from` | `"system"` for shipped presets | +| `setting_id` | generated; required on instantiated presets, forbidden on bases | +| `renamed_from` | `;`-separated old names this preset supersedes ([below](#renamed_from)) | These are config-preset keys; `machine_model` records have their own -[schema](machine-profiles.md#a-machine_model-is-not-a-config-preset). Keep `from` as `"system"` -for shipped presets. The vendor loader ignores it, but the CLI config-file loader accepts only -`system`, `user` or `User` and handles their inheritance differently. +[key set](machine-profiles.md#machine_model-a-record-not-a-config-preset). Keep `from` as `"system"`: +the bundle loader ignores it, but loading the file as a CLI config accepts only `system`, `user` or +`User` and handles their inheritance differently. -`instantiation` is the one metadata key that is hard-gated: a missing key or any value other than the -strings `"true"`/`"false"` is an error (`Missing instantiation attribute for `). A JSON boolean -`true` fails harder — it throws inside `load_from_json` and takes the **whole vendor bundle** down. +`instantiation` is the one metadata key the validator gates: a missing key or any value other than the +strings `"true"` / `"false"` is a counted error (`Missing instantiation attribute for `) that fails +the validator, though the preset still loads and is treated as selectable. A file with no +`instantiation` whose name contains `gcode`, or that has no `name`, silently becomes an include-only +template. A JSON boolean `true` fails harder: it takes the **whole vendor bundle** down. -### `inherits` +## `inherits` and `include` -Resolution is an exact-name lookup **within the same bundle**, plus one exception: filaments may inherit -from `OrcaFilamentLibrary`, which is loaded first and becomes the base bundle. Vendor-to-vendor -inheritance always fails. You can inherit from an instantiated preset as well as from a base; it is -common. +`inherits` resolves by exact name **within the same bundle**, plus one exception: filaments may inherit +from OrcaFilamentLibrary, which is loaded first. Vendor-to-vendor inheritance always fails, and an +unresolved `inherits` discards the bundle. You can inherit from an instantiated preset as well as from a +base. -### `renamed_from` +`"include": ["", …]` (or one bare name) pulls in `instantiation: "false"` presets of the same type +from the same bundle (never the library), registered before the includer. It shares a block of keys +between presets that do not share a parent: a variant layout, a G-code template. Only `"false"` presets +can be included, so a name that resolves to nothing (misspelled, registered after the includer, or a +selectable preset) is a counted error (`can not find include`) and the preset loads without it. + +**How a preset's config is composed:** start from the parent's stored config (a root starts from the +built-in defaults), apply each preset named in `include` in the order listed, then the preset's own +keys. Later layers win, so precedence is own keys > later includes > earlier includes > the `inherits` +chain. Only then is every variant key of the composed config resized to its variant length +([widths](extruder-variants.md#widths)), and keys of another preset type removed. The two routes hand +down different widths: + +- **`inherits` hands down the resized config.** A base is stored *after* its own resize, at the length + of its own `*_extruder_variant` (one variant for a base of any type that writes none, whatever its + extruder count). A child therefore inherits the base's arrays at the base's width: an array wider than + that is cut to its first values before any child sees it, and a child that adds variants gets those + first values padded. So widen an array only on a preset whose own variant list already has the + entries; a wide array on a narrow base is silently lost at load, and `check`, which composes at the + width each file wrote and judges selectable presets only, misses that cut. +- **`include` hands down the template's diff, at its pre-resize width.** An included preset contributes + every key where its own composed config (its parent, its own includes and its own keys) differs from + the built-in defaults, taken *before* its resize. So keys the template inherits are passed on too, + arrays it writes arrive at the width its file wrote, and a key it sets to the built-in default value + is not passed on at all, so it cannot override what the includer inherited. Resizing happens on the + includer, not on the template. + +## `renamed_from` One JSON string, `;`-separated for several old names. -- Write `"A;B"`, never `"A ; B"` — an unquoted item keeps its trailing space and can never match. +- Write `"A;B"`, never `"A ; B"`: a space after a `;` is skipped, but a space before it stays part of + the name (`"A "`), which can never match. - When `renamed_from` is **absent** and the name contains `@`, the loader auto-adds the `@`-removed form (`X @Y` → `X Y`) as a rename alias. Declaring an explicit `renamed_from` **suppresses** that, so a - preset that needs both the `@`-removed form and a real old name must list both. No shipped profile - currently does, which means any preset that gained a `renamed_from` quietly lost its `X Y` alias. + preset that needs both the `@`-removed form and a real old name must list both; a preset that gains + a `renamed_from` without it quietly loses its `X Y` alias. - It rescues names stored **outside** the tree: user presets and 3MF projects. It does **not** rescue - in-tree `inherits` (exact lookup), it does **not** satisfy `check_name_consistency`, the validator - reports an in-tree reference that only resolves through it (`references renamed compatible_printers - "OLD" (now "NEW")`), and `machine_model` records never read it at all. -- Only one preset may claim a given old name — two that do is a counted error + in-tree `inherits` (exact lookup), it does **not** satisfy the index-name rule, the validator reports + an in-tree reference that only resolves through it (`references renamed compatible_printers "OLD" + (now "NEW")`), and `machine_model` records never read it at all. +- Only one preset may claim a given old name; two that do is a counted error (`… was marked as renamed from "Y" … as well`). But the redirect is **inert while a live preset still - carries that name**, and nothing checks *that*; Z-Bolt ships a folder of such dead entries. + carries that name**, and nothing checks *that*, so a neighbour's `renamed_from` is no model. -## Failure modes, ranked by blast radius +## Failure scopes | Scope | Cause | | --- | --- | -| **All vendors, zero system profiles** | a non-string `version`, `name` or `url` at the top level of a vendor index (`"version": 2`), or non-string `nozzle_diameter` on a model — `nlohmann::type_error` escapes the per-vendor `std::runtime_error` catch | -| **The whole vendor bundle** | unparseable `version`; index JSON parse error; a `sub_path` file missing or unparseable; unresolvable `inherits`; duplicate preset name within the vendor; empty/unknown `printer_model` or `printer_variant`; a filament resolving no `filament_id` | -| **One preset** | `instantiation` missing or a wrong string; keys belonging to another preset type (`contains incorrect keys: …, which were removed`); a non-string inside a `*_list` entry (`invalid value type for `) | -| **Logged, not counted** | a raw JSON number in a preset — `invalid json type for `, the value is dropped and the exit code stays 0 | -| **Nothing reported by the loader** | unregistered file; misspelled setting key; missing bed/hotend asset. Only the first of those is a `check` error; the other two reach users | +| **Every vendor except OrcaFilamentLibrary, and all user presets** | a non-string where the index or a `machine_model` expects a string (`"version": 2` at the top level of an index, a numeric `name` or `url`, a non-string `nozzle_diameter` or other model key): `[json.exception.type_error.302] type must be string`, and the validator reports `Validation failed` | +| **The whole vendor bundle** | index JSON parse error; unparseable `version`; a listed file missing or unparseable; a value its option cannot take, such as `nil` in a non-nullable key (`Failed loading configuration file`); unresolved `inherits`; two selectable presets with one name; empty or unknown `printer_model` / `printer_variant`; a filament resolving no `filament_id`; a JSON boolean `instantiation` | +| **A counted error; the preset still loads** | `instantiation` missing or not `"true"` / `"false"`; keys belonging to another preset type (`contains incorrect keys: …, which were removed`); a non-string inside a `*_list` entry (`invalid value type for `); an `include` naming nothing usable (`can not find include`, loads without it) | +| **The rest of the file, logged only** | an array with a non-string element (`[0.4]`, `invalid json array`): that key and every key after it in the file are dropped, and no error is counted | +| **One value, logged only** | a raw JSON number in a preset (`invalid json type for `): the value is dropped and the exit code stays 0 | +| **Nothing reported by the loader** | unregistered file; two bases with one name, or a base and a selectable preset with one name (the first in the index wins); misspelled setting key; missing bed, hotend or cover asset. `check` catches the first two; the others reach users | -Deleting a file the index still lists surfaces as a *parse error* on line 1, not "file not found" — the -loader `ifstream`s the missing path and nlohmann reports `unexpected end of input`. +Deleting a file the index still lists surfaces as a *parse error* on line 1 (`unexpected end of input`), not "file +not found". -Preset names are a **single global namespace across every vendor**: a duplicate within one vendor is a -hard bundle failure, a duplicate across vendors is reported as `Found duplicated preset: in -vendor: ` and still counts as an error. `check_preset_name_uniqueness` catches the within-bundle -case earlier and more precisely — including an *unindexed* twin, which is one `sub_path` edit away from -silently becoming the parent every child resolves to (`std::map::emplace` keeps the first insertion, so -index order decides). Base names, by contrast, repeat across bundles by design: `fdm_process_common` -exists in nearly all of them. +Selectable preset names are a **single namespace across every vendor**: a duplicate within one vendor +is a hard bundle failure, and a duplicate across vendors is reported as `Found duplicated preset: +in vendor: ` and still counts as an error. `check` catches the within-bundle case earlier and +more precisely, bases included, and including an *unindexed* twin, which is one `sub_path` edit away +from silently becoming the parent every child resolves to (the first registered preset of a name wins, +so index order decides). Base names, by contrast, repeat across bundles by design: +every bundle may have its own `fdm_process_common` ([uniqueness](naming.md#uniqueness)). ## Starting a whole new vendor bundle -Nothing generates one; copy the smallest bundle that resembles the hardware. **`Voxelab` or `M3D`** are -the minimal shape — a shared machine base, the model, one variant, a shared process base, two -processes, and an empty `filament_list` that takes the library generics. Do *not* start from `Phrozen`: -it carries local `fdm_filament_*` copies that have drifted from the library, and a filament preset that -restates most of its parent — the style this skill advises against. +Nothing generates one; copy the smallest bundle that resembles the hardware. **`Voxelab`** is the +minimal shape: a shared machine base, the model, one variant, a shared process base, two processes, and +an empty `filament_list`, so the printer takes the library generics. Do *not* start from a bundle that +carries local `fdm_filament_*` copies, which drift from the library, or filament presets that restate +most of their parent, the style this skill advises against. Write the machine files **last**, so you only visit them once: -1. **Choose the names first** — model, variant(s), process(es). Everything else references them. +1. **Choose the names first**: model, variant(s), process(es). Everything else references them + ([naming.md](naming.md)). 2. `resources/profiles/.json`: `name`, `version` (`01.00.00.00`), `force_update: "0"`, - `description`, and all four `*_list` arrays (an empty `filament_list` is fine). -3. The shared bases — `/machine/fdm_machine_common.json` and - `/process/fdm_process_common.json`, both `"instantiation": "false"` with no `setting_id`. - For a Klipper printer add your own `/machine/fdm_klipper_common.json` inheriting the machine + `description`, and all four `*_list` arrays (empty is fine: `update-index` fills them once the files + exist, so this step only needs the bundle metadata to be right). +3. The shared bases: `/machine/fdm_machine_common.json` and + `/process/fdm_process_common.json`, both `"instantiation": "false"` with no `setting_id`. For + a Klipper printer add your own `/machine/fdm_klipper_common.json` inheriting the machine base; there is no shared one, because a `machine` preset can only inherit inside its own bundle. 4. One selectable process per variant, each naming its variant in `compatible_printers`. 5. Bed assets and `_cover.png`, all directly in `/`. None of them is needed for the - bundle to load, and nothing in CI checks them — but the bed files are inert unless the `machine_model` - names them in `bed_model` / `bed_texture`, and the cover is found by convention as + bundle to load, and nothing in CI checks them; but the bed files are inert unless the + `machine_model` names them in `bed_model` / `bed_texture`, and the cover is found by convention as `_cover.png`. -6. The `machine_model` record and the `machine` variants, now that every value they reference exists — +6. The `machine_model` record and the `machine` variants, now that every value they reference exists; the minimum key sets and the `default_*` shapes are in - [machine-profiles.md](machine-profiles.md#the-machine-variant). -7. Run the tool and validate — follow + [machine-profiles.md](machine-profiles.md#machine-the-variant). +7. Run the tool and validate: follow [Creating or modifying a profile](../SKILL.md#creating-or-modifying-a-profile). `generate-id` is not optional for a new bundle: the validator loads presets that have no `setting_id`, but `check` fails - every one of them. `update-index` will fill the four `*_list` arrays for you once the files exist, so - step 2 only needs the bundle metadata to be right. + every one of them. ## `resources/profiles_template/` A separate tree (`Template.json` + `Template/`) holding filament and process templates. It is **not** a -scaffold for shipped profiles — `CreatePresetsDialog.cpp` reads it for the in-app "create a custom -printer/filament" wizard, so editing it changes what users get when they create a custom preset. -`check_profile.sh`'s validator checks default to `resources/profiles` (redirectable with `-p`), and so -does `orca_profile_tool.py` (redirectable with `--profiles`); -neither covers this tree. +scaffold for shipped profiles: the app's "create a custom printer / filament" dialog reads it, so +editing it changes what users get when they create a custom preset. `check_profile.sh`'s validator +checks default to `resources/profiles` (redirectable with `-p`), and so does `orca_profile_tool.py` +(redirectable with `--profiles`); neither covers this tree. diff --git a/.claude/skills/orca-profiles/scripts/shared_settings.py b/.claude/skills/orca-profiles/scripts/shared_settings.py new file mode 100644 index 0000000000..261fe19da4 --- /dev/null +++ b/.claude/skills/orca-profiles/scripts/shared_settings.py @@ -0,0 +1,241 @@ +#!/usr/bin/env python3 +"""Find settings to move onto shared bases, and prove a move changed nothing. + + snapshot OUT.json write every selectable preset's config as the loader stores it + compare BEFORE.json report every value that differs from the snapshot; exit 1 if any + candidates --vendor V restated values; per base, the settings its presets all share and the + defaults with exceptions that would pay + +Every subcommand takes --profiles DIR (default resources/profiles). + +Configs are composed the loader's way: the parent's stored config, then each include at +the width its file wrote, then the preset's own keys, and every variant key resized to the +preset's own variant list (one variant without one), padded with its first value or cut. +A base is stored after that resize, so a variant array wider than a base's list reaches its +children cut. Not modelled: the built-in defaults. A key no file in a preset's chain writes +loads its default, so compare reports a key written on one side only separately: it is no +change when the written value is the option's default in PrintConfig.cpp. Nor is it modelled +that an include template does not pass on a key equal to the default. Reads +scripts/orca_profile_tool.py. +""" +import argparse +import json +import os +import sys +from collections import Counter, defaultdict + +# The profile tool lives in /scripts; this file in /.claude/skills/orca-profiles/scripts. +sys.path[:0] = [os.path.join(os.getcwd(), "scripts"), + os.path.join(os.path.dirname(os.path.abspath(__file__)), *[os.pardir] * 4, "scripts")] +import orca_profile_tool as tool # noqa: E402 + +TYPES = ("machine", "process", "filament") +# Keys the loader reads from each file as metadata; neither inherits nor include passes them on. +PER_FILE = {"type", "name", "from", "instantiation", "setting_id", "renamed_from", "description", + "inherits", "include", "version", "url", "is_custom_defined"} +# Keys the app replaces with the selected presets' names before slicing: a file's value never counts. +REPLACED = {"print_settings_id", "printer_settings_id", "filament_settings_id"} +# What a restructure changes by design, or what never reaches a slice. +MOVED_BY_DESIGN = {"inherits", "include"} | REPLACED +# Keys that stay in their own file: metadata, identity, and each preset's compatibility. +NEVER_SHARED = PER_FILE | REPLACED | {"filament_id", "compatible_printers", "compatible_prints", + "printer_variant", "printer_model"} + + +class Tree: + def __init__(self, profiles_dir): + self.dir = profiles_dir + self.scheme = tool._variant_scheme() + self.vendors = tool.list_vendor_names(profiles_dir) + self.bundles = {v: tool.load_vendor_configs(profiles_dir, v) for v in self.vendors} + self.cache = {} + + def lookup(self, vendor, ptype, name, in_ofl=False): + """(vendor the name resolves in, (rel, data)); filaments fall back to the library.""" + if not in_ofl and name in self.bundles[vendor][ptype]: + return vendor, self.bundles[vendor][ptype][name] + if ptype == "filament" and tool.OFL in self.bundles and name in self.bundles[tool.OFL][ptype]: + return tool.OFL, self.bundles[tool.OFL][ptype][name] + return None, None + + def composed(self, vendor, ptype, name, drop=None, seen=frozenset()): + """Config before the preset's own resize: parent stored, includes, own keys.""" + owner, found = self.lookup(vendor, ptype, name, vendor == tool.OFL) + if found is None or (owner, name) in seen: + return {} + seen = seen | {(owner, name)} + data = found[1] + config = {} + if data.get("inherits"): + config.update(self.stored(owner, ptype, data["inherits"], seen)) + include = data.get("include") or [] + for included in [include] if isinstance(include, str) else include: + if included in self.bundles[owner][ptype]: + config.update(self.composed(owner, ptype, included, seen=seen)) + config = {k: v for k, v in config.items() if k not in PER_FILE} + config.update((k, v) for k, v in data.items() if k != drop) + return config + + def stored(self, vendor, ptype, name, seen=frozenset()): + key = (vendor, ptype, name) + if key not in self.cache: + self.cache[key] = self.resize(ptype, self.composed(vendor, ptype, name, seen=seen)) + return self.cache[key] + + def resize(self, ptype, config): + list_key, strides = self.scheme[ptype] + length = len(tool._as_list(config[list_key])) if list_key in config else 1 + out = dict(config) + for key, stride in strides.items(): + if key in out: + values = tool._as_list(out[key]) + need = length * stride + out[key] = values[:need] + values[:1] * (need - len(values)) + return out + + def presets(self, vendors=None, ptypes=TYPES): + for vendor in vendors or self.vendors: + for ptype in ptypes: + for name, (rel, data) in sorted(self.bundles[vendor][ptype].items()): + yield vendor, ptype, name, rel, data + + +def snapshot(tree): + return {f"{vendor}/{ptype}/{name}": {k: v for k, v in tree.stored(vendor, ptype, name).items() + if k not in MOVED_BY_DESIGN} + for vendor, ptype, name, _rel, data in tree.presets() + if data.get("instantiation") == "true"} + + +def compare(before, after): + changed, one_sided = 0, [] + for preset in sorted(before.keys() | after.keys()): + old, new = before.get(preset), after.get(preset) + if old is None or new is None: + print(f"{preset}: {'added' if old is None else 'removed'}") + changed += 1 + continue + for key in sorted(old.keys() | new.keys()): + if key not in old or key not in new: + one_sided.append(f"{preset}: {key} " + f"{json.dumps(old[key]) if key in old else '(built-in default)'} -> " + f"{json.dumps(new[key]) if key in new else '(built-in default)'}") + elif old[key] != new[key]: + print(f"{preset}: {key} {json.dumps(old[key])} -> {json.dumps(new[key])}") + changed += 1 + for line in one_sided: + print(line) + print(f"{changed} difference(s)") + if one_sided: + print(f"{len(one_sided)} key(s) written on one side only: each is a difference unless the " + f"written value is the option's default in src/libslic3r/PrintConfig.cpp") + return changed + len(one_sided) + + +def candidates(tree, vendor, ptypes, group_by): + for ptype in ptypes: + entries = {name: data for _v, _t, name, _rel, data in tree.presets([vendor], (ptype,))} + selectable = [n for n, d in entries.items() if d.get("instantiation") == "true"] + stored = {n: tree.stored(vendor, ptype, n) for n in entries} + list_key = tree.scheme[ptype][0] + + # Restated: a key a file writes that it would inherit unchanged without writing it. + restated = {} + for name, data in entries.items(): + restated[name] = sorted( + k for k in data if k not in NEVER_SHARED and k != list_key + and (data.get("inherits") or data.get("include")) + and tree.resize(ptype, tree.composed(vendor, ptype, name, drop=k)).get(k) == stored[name][k]) + if restated[name]: + print(f"{vendor}/{ptype} {name}: restates what it inherits: {', '.join(restated[name])}") + + # Groups: every preset with selectable presets below it, or the --group-by values. + chain = {n: [] for n in selectable} + for name in selectable: + node = entries[name].get("inherits") + while node in entries and node not in chain[name]: + chain[name].append(node) + node = entries[node].get("inherits") + groups = defaultdict(list) + for name in selectable: + if group_by: + groups[json.dumps(stored[name].get(group_by))].append(name) + else: + for base in chain[name]: + groups[base].append(name) + printed = {} + for label, members in sorted(groups.items(), key=lambda g: -len(g[1])): + if len(members) < 2 or label == "null": + continue + if frozenset(members) in printed: + print(f"\n{vendor}/{ptype} {label}: the same presets as {printed[frozenset(members)]}") + continue + common = [b for b in chain[members[0]] if all(b in chain[m] for m in members[1:])] + home = common[0] if group_by and common else None if group_by else label + + def below(m): + """m and the files between it and the group's home.""" + return [m] + chain[m][:chain[m].index(home)] if home in chain[m] else [m] + shared, defaults = [], [] + for key in sorted(set().union(*(entries[m].keys() for m in members)) - NEVER_SHARED): + loaded = [json.dumps(stored[m].get(key)) for m in members] + counts = Counter(loaded).most_common(2) + if len(counts) == 1: + writers = sum(key in entries[m] and key not in restated[m] for m in members) + if writers >= 2: + shared.append(f"{key} ({writers} write it)") + continue + (top, held), (_, runner_up) = counts + if held == runner_up or top == "null" or home is None: + continue + # Balance 5: w presets drop their copy; a presets that take the key from the home + # (no file on their way to it writes it) and load another value must write theirs. + w = sum(key in entries[m] and v == top for m, v in zip(members, loaded)) + a = sum(v != top and not any(key in entries[f] for f in below(m)) + for m, v in zip(members, loaded)) + if w - a > 1: + shown = top if len(top) <= 40 else top[:37] + "..." + defaults.append(f"{key} = {shown}: {held} load it, {w} write it, " + f"{a} would have to write their own") + if shared or defaults: + where = f"; nearest common base {common[0]}" if group_by and common else "" + title = f"{group_by} = {label}" if group_by else label + print(f"\n{vendor}/{ptype} {title}: {len(members)} presets{where}") + printed[frozenset(members)] = title + for line in shared: + print(f" {line}") + if defaults: + print(" default with exceptions:") + for line in defaults: + print(f" {line}") + + +def main(): + parser = argparse.ArgumentParser(description=__doc__, formatter_class=argparse.RawDescriptionHelpFormatter) + profiles = argparse.ArgumentParser(add_help=False) + profiles.add_argument("--profiles", default=os.path.join("resources", "profiles"), + help="profiles directory (default: resources/profiles)") + sub = parser.add_subparsers(dest="command", required=True) + sub.add_parser("snapshot", parents=[profiles]).add_argument("out") + sub.add_parser("compare", parents=[profiles]).add_argument("before") + cand = sub.add_parser("candidates", parents=[profiles]) + cand.add_argument("--vendor", required=True) + cand.add_argument("--type", choices=TYPES, action="append") + cand.add_argument("--group-by", help="group selectable presets by this key's value instead of by " + "base: printer_model, gcode_flavor, extruder_type, filament_id, layer_height, ...") + args = parser.parse_args() + tree = Tree(args.profiles) + if args.command == "snapshot": + presets = snapshot(tree) + with open(args.out, "w", encoding="utf-8") as f: + json.dump(presets, f, sort_keys=True) + print(f"{len(presets)} selectable presets written to {args.out}") + elif args.command == "compare": + with open(args.before, encoding="utf-8") as f: + sys.exit(1 if compare(json.load(f), snapshot(tree)) else 0) + else: + candidates(tree, args.vendor, args.type or TYPES, args.group_by) + + +if __name__ == "__main__": + main() diff --git a/.github/workflows/build_all.yml b/.github/workflows/build_all.yml index ed106ec65e..d45ec215b8 100644 --- a/.github/workflows/build_all.yml +++ b/.github/workflows/build_all.yml @@ -183,9 +183,11 @@ jobs: os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }} artifact: ${{ github.sha }}-tests-macos-arm64 test-dir: build/arm64/tests - # Slice a two-colour cube through every shipped printer so all custom g-code - # (change_filament_gcode, machine start/end, etc.) is expanded - catches - # slicing regressions the static profile checks and unit tests can't see. + # Slice a two-colour cube through every shipped printer, and through every + # system process/filament whose templates no printer's own slice reaches, so + # every custom g-code and filename_format shipped is expanded (names in {if} + # branches not taken included) - catches slicing regressions the static + # profile checks and unit tests can't see. # Profile-only PRs are covered by check_profiles.yml's nightly binary; this # covers src/engine PRs with the PR-built binary. slice_check_linux: @@ -413,6 +415,14 @@ jobs: GH_TOKEN: ${{ github.token }} run: | api="$GITHUB_API_URL/repos/$GITHUB_REPOSITORY/actions/caches" + # The save step reports success even when its tar failed, so keep + # the older entries unless the new one is listed. + if ! curl -sSf -H "Authorization: Bearer $GH_TOKEN" \ + "$api?ref=$GITHUB_REF&key=$CCACHE_ENTRY" \ + | jq -e --arg entry "$CCACHE_ENTRY" 'any(.actions_caches[]; .key == $entry)' > /dev/null; then + echo "$CCACHE_ENTRY was not saved; keeping the older entries." + exit 0 + fi curl -sSf -H "Authorization: Bearer $GH_TOKEN" \ "$api?ref=$GITHUB_REF&key=ccache-$CCACHE_LEG-&per_page=100" \ | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \ diff --git a/.github/workflows/build_orca.yml b/.github/workflows/build_orca.yml index 85458615b4..2ea72d0773 100644 --- a/.github/workflows/build_orca.yml +++ b/.github/workflows/build_orca.yml @@ -798,6 +798,13 @@ jobs: env: GH_TOKEN: ${{ github.token }} run: | + # The save step reports success even when its tar failed, so keep + # the older entries unless the new one is listed. + if ! gh cache list --ref "$GITHUB_REF" --key "$CCACHE_ENTRY" --json key \ + | jq -e --arg entry "$CCACHE_ENTRY" 'any(.[]; .key == $entry)' > /dev/null; then + echo "$CCACHE_ENTRY was not saved; keeping the older entries." + exit 0 + fi gh cache list --ref "$GITHUB_REF" --key "ccache-$CCACHE_LEG-" --limit 100 --json id,key \ | jq -r --arg prefix "ccache-$CCACHE_LEG-" --argjson run "$GITHUB_RUN_ID" \ '.[] | select((.key | ltrimstr($prefix) | split("-")[0] | tonumber?) < $run) | .id' \ diff --git a/.github/workflows/check_profiles.yml b/.github/workflows/check_profiles.yml index e668482bfd..2a6ed8f0a4 100644 --- a/.github/workflows/check_profiles.yml +++ b/.github/workflows/check_profiles.yml @@ -14,6 +14,9 @@ on: # this workflow. - 'resources/printers/**' - 'scripts/**' + # orca_profile_tool.py reads the variant key sets from PrintConfig.cpp, and its + # tests the obsolete keys, so a PR changing either must be checked against the profiles. + - 'src/libslic3r/PrintConfig.cpp' - ".github/workflows/check_profiles.yml" workflow_dispatch: @@ -71,8 +74,10 @@ jobs: set +e ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_system.log exit ${PIPESTATUS[0]} - # Slice a two-colour cube through every printer so all custom g-code (incl. change_filament_gcode) - # is expanded - catches undefined-placeholder / invalid-flow bugs the static checks above cannot see. + # Slice a two-colour cube through every printer, and through every system process/filament whose + # templates no printer's own slice reaches, so every custom g-code and filename_format shipped is + # expanded (names in {if} branches not taken included) - catches undefined-placeholder / + # invalid-flow bugs the static checks above cannot see. - name: validate slice (expand custom g-code) id: validate_slice continue-on-error: true diff --git a/.github/workflows/ofl-ota-cronjob.yml b/.github/workflows/ofl-ota-cronjob.yml new file mode 100644 index 0000000000..9d027190ae --- /dev/null +++ b/.github/workflows/ofl-ota-cronjob.yml @@ -0,0 +1,199 @@ +name: Daily OFL OTA Update + +run-name: Daily OFL OTA Update [OFL barrier] + +# This workflow is intended for creating and publishing the OrcaFilamentLibrary (OFL) OPC package to +# https://github.com/OrcaSlicer/orcaslicer-profiles, which generates an OTA update. +# This cronjob runs daily at 00:00 UTC every day and scans main plus every release/vX.Y.Z branch for +# changes to resources/profiles/OrcaFilamentLibrary since that branch's own last successful run. Any +# branch with no changes is skipped; each changed branch gets its own post_merge_profiles.yml dispatch. +# +# OFL has no dedicated FOLDER_MERGERS grant (it isn't merged through the PR merge-bot delegation +# scheme), so post_merge_profiles.yml is dispatched with an explicit `vendor` input, which that +# workflow trusts and uses to bypass the FOLDER_MERGERS check for this trigger. That same explicit- +# vendor-dispatch path is also what makes post_merge_profiles.yml call the OTA auto-publish API after +# uploading - see post_merge_profiles.yml for both sides of that contract. +# +# Each run captures a timestamp, dispatches the needed OFL publishers, waits for +# all of them to finish, then clears the pending-publish table once. Changes merged +# after that timestamp remain pending for the next run. + +on: + schedule: + - cron: "0 0 * * *" + + workflow_dispatch: + +permissions: + actions: write # list this workflow's past runs and dispatch post_merge_profiles.yml + contents: read + +env: + VENDOR: OrcaFilamentLibrary + +jobs: + daily-job: + if: ${{ github.repository == 'OrcaSlicer/OrcaSlicer' }} + runs-on: ubuntu-24.04 + steps: + - name: Capture start timestamp + id: start + shell: bash + run: | + set -euo pipefail + timestamp="$(date -u +%s)" + echo "timestamp=$timestamp" >> "$GITHUB_OUTPUT" + + - name: Checkout repository + uses: actions/checkout@v7 + with: + # Full history: the per-branch "since last successful run" check below + # needs to look arbitrarily far back if a prior run failed or was skipped. + fetch-depth: 0 + + - name: Fetch all branches + shell: bash + run: git fetch origin '+refs/heads/*:refs/remotes/origin/*' + + - name: Scan branches and publish changed OFL profiles + shell: bash + env: + GH_TOKEN: ${{ secrets.GITHUB_TOKEN }} + SCAN_UNTIL: ${{ steps.start.outputs.timestamp }} + run: | + set -euo pipefail + + mapfile -t branches < <( + gh api "repos/${{ github.repository }}/branches" --paginate --jq '.[].name' \ + | grep -E '^(main|release/v[0-9]+\.[0-9]+\.[0-9]+)$' | sort -u + ) + + # The cron run is the checkpoint: a successful run means every + # dispatched branch publisher completed and the pending queue was + # cleared. Manual or push-triggered post_merge_profiles runs are not + # checkpoints for this scan. + successful_cron_runs="$(gh api --method GET \ + "repos/${{ github.repository }}/actions/workflows/ofl-ota-cronjob.yml/runs" \ + -f status=success -f branch=main -f per_page=100 --paginate \ + --jq '.workflow_runs[] | select((.display_title // "") | contains("[OFL barrier]"))')" + since="$(jq -rs 'sort_by(.run_started_at) | last.run_started_at // empty' <<< "$successful_cron_runs")" + + for branch in "${branches[@]}"; do + echo "::group::$branch" + + if [ -z "$since" ]; then + echo "No prior successful OFL cron run; checking $branch through $SCAN_UNTIL." + changed_files="$(git log --until="$SCAN_UNTIL" --name-only --pretty=format: "origin/$branch" -- \ + resources/profiles/OrcaFilamentLibrary resources/profiles/OrcaFilamentLibrary.json \ + | sed '/^$/d')" + else + changed_files="$(git log --since="$since" --until="$SCAN_UNTIL" --name-only --pretty=format: "origin/$branch" -- \ + resources/profiles/OrcaFilamentLibrary resources/profiles/OrcaFilamentLibrary.json \ + | sed '/^$/d')" + fi + + if [ -n "$changed_files" ]; then + echo "OFL changed on $branch from ${since:-the beginning} through $SCAN_UNTIL:" + echo "$changed_files" + changed=true + else + echo "No OFL changes on $branch through $SCAN_UNTIL." + changed=false + fi + + if [ "$changed" = true ]; then + dispatch_id="${GITHUB_RUN_ID}-${branch//\//-}" + # Record successful dispatches for the barrier step below. + # Branches whose workflow predates workflow_dispatch are skipped + # with a warning, as they were before the barrier was added. + if gh workflow run post_merge_profiles.yml \ + --repo "${{ github.repository }}" \ + --ref "$branch" \ + -f vendor="$VENDOR" -f auto_publish=true \ + -f ofl_cron_dispatch_id="$dispatch_id"; then + printf '%s\t%s\n' "$branch" "$dispatch_id" >> "$RUNNER_TEMP/ofl-dispatches.tsv" + else + echo "::warning::skipping $branch because post_merge_profiles.yml could not be dispatched at that ref" + fi + fi + + echo "::endgroup::" + done + + - name: Wait for OFL publishers + id: wait + shell: bash + env: + GH_TOKEN: ${{ secrets.GITHUB_TOKEN }} + DISPATCHES_FILE: ${{ runner.temp }}/ofl-dispatches.tsv + run: | + set -euo pipefail + + if [ ! -s "$DISPATCHES_FILE" ]; then + echo "No OFL publisher workflows were dispatched; pending queue will not be cleared." + echo "publishers_dispatched=false" >> "$GITHUB_OUTPUT" + exit 0 + fi + + : > "$RUNNER_TEMP/ofl-run-ids.tsv" + while IFS=$'\t' read -r branch dispatch_id; do + [ -n "$branch" ] || continue + echo "Waiting for OFL publisher on $branch ($dispatch_id)" + + run_id="" + for _ in {1..120}; do + runs_json="$(gh api --method GET \ + "repos/${{ github.repository }}/actions/workflows/post_merge_profiles.yml/runs" \ + -f branch="$branch" -f event=workflow_dispatch -f per_page=100)" + run_id="$(jq -r --arg marker "[OFL cron $dispatch_id]" \ + '[.workflow_runs[] | select((.display_title // "") | contains($marker))] \ + | sort_by(.created_at) | last | .id // empty' <<< "$runs_json")" + [ -n "$run_id" ] && break + sleep 5 + done + + if [ -z "$run_id" ]; then + echo "::error::could not find dispatched post_merge_profiles run for $branch ($dispatch_id)" + exit 1 + fi + printf '%s\t%s\n' "$branch" "$run_id" >> "$RUNNER_TEMP/ofl-run-ids.tsv" + done < "$DISPATCHES_FILE" + + all_success=true + while IFS=$'\t' read -r branch run_id; do + [ -n "$run_id" ] || continue + echo "Watching OFL publisher run $run_id for $branch" + if ! gh run watch "$run_id" --repo "${{ github.repository }}" --exit-status; then + all_success=false + fi + done < "$RUNNER_TEMP/ofl-run-ids.tsv" + + if [ "$all_success" != true ]; then + echo "::error::one or more OFL publisher workflows failed; pending queue will not be cleared" + exit 1 + fi + echo "publishers_dispatched=true" >> "$GITHUB_OUTPUT" + + - name: Clear OFL pending queue + if: steps.wait.outputs.publishers_dispatched == 'true' + shell: bash + env: + OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }} + OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }} + TIMESTAMP: ${{ steps.start.outputs.timestamp }} + run: | + set -euo pipefail + [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; } + [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; } + + resp_file="$RUNNER_TEMP/ota-pending-clear-response.json" + status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \ + "${OTA_API_BASE_URL%/}/api/v1/ota/ofl/pending/clear?timestamp=$TIMESTAMP" \ + -H "Authorization: Bearer $OTA_API_KEY")" + body="$(cat "$resp_file")" + echo "$body" + + if [ "$status" != "200" ]; then + echo "::error::OTA pending-clear call failed with HTTP $status" + exit 1 + fi diff --git a/.github/workflows/parity_nightly.yml b/.github/workflows/parity_nightly.yml index 79f5c9b514..44937fdad5 100644 --- a/.github/workflows/parity_nightly.yml +++ b/.github/workflows/parity_nightly.yml @@ -5,8 +5,9 @@ # re-sliced on its own to see whether it changes the G-code # harness - the GUI-vs-CLI parity harness (metrics only, never fails) # Both test the latest successful build_all.yml Linux AppImage from main, with -# sources checked out at the commit that build was made from. Nothing here -# gates a build or a PR. +# sources checked out at the commit that build was made from; a manual run can +# name another branch, or pin one build by its run id. Nothing here gates a +# build or a PR. name: Parity Nightly on: @@ -20,9 +21,13 @@ on: required: false default: "main" build_branch: - description: "branch whose latest successful build_all artifact to test" + description: "branch whose newest successful build_all artifact to test (a PR build is the PR merged into its base; sources are checked out at the PR head)" required: false default: "main" + build_run_id: + description: "build_all run id to test instead of build_branch's newest (same PR caveat)" + required: false + default: "" fixtures: description: "harness fixture ids, space-separated (empty = all)" required: false @@ -50,14 +55,53 @@ jobs: env: GH_TOKEN: ${{ github.token }} GH_REPO: ${{ github.repository }} + BRANCH: ${{ inputs.build_branch || 'main' }} + RUN_ID: ${{ inputs.build_run_id }} + SCHEDULED: ${{ github.event_name == 'schedule' }} run: | set -euo pipefail - gh run list --workflow build_all.yml \ - --branch "${{ inputs.build_branch || 'main' }}" \ - --status success --limit 1 --json databaseId,headSha \ - --jq '"run_id=\(.[0].databaseId)\nhead_sha=\(.[0].headSha)"' \ - >> "$GITHUB_OUTPUT" + if [ -n "$RUN_ID" ]; then + [[ $RUN_ID =~ ^[0-9]+$ ]] || { echo "build_run_id must be a numeric run id, got '$RUN_ID'" >&2; exit 1; } + # a pinned build is read directly, not through a search; it must come + # from this repository, because the later jobs check out its commit here + found=$(gh api "repos/$GH_REPO/actions/runs/$RUN_ID" --jq \ + 'select(.path == ".github/workflows/build_all.yml" and .conclusion == "success" + and .head_repository.full_name == env.GH_REPO) + | "\(.id) \(.head_sha) \(.created_at)"') + [ -n "$found" ] || { echo "run $RUN_ID is not a successful build_all run of $GH_REPO" >&2; exit 1; } + else + # GitHub serves filtered run listings (branch=, status=, head_sha=, ...) + # from a search index that has returned weeks-old results, while the + # unfiltered listing stays current, so list unfiltered and filter here. + # The repository check keeps out fork PRs whose branch has the same + # name. A feature branch is normally built only for its PR, and a PR + # build compiles the PR merged into its base rather than head_sha, so + # a build of the branch itself (push or dispatch) is preferred when + # the same page has one. + pick='([.workflow_runs[] | select(.head_branch == env.BRANCH and .conclusion == "success" + and .head_repository.full_name == env.GH_REPO)] + | map(select(.event != "pull_request"))[0] // .[0]) + | select(.) | "\(.id) \(.head_sha) \(.created_at)"' + # a page of 100 runs spans about a day and a half; a manual run may + # target a branch that last built weeks ago + pages=3 + if [ "$SCHEDULED" != true ]; then pages=20; fi + found="" + for page in $(seq "$pages"); do + found=$(gh api "repos/$GH_REPO/actions/workflows/build_all.yml/runs?per_page=100&page=$page" --jq "$pick") + if [ -n "$found" ]; then break; fi + done + [ -n "$found" ] || { echo "no successful $BRANCH build among the last $((pages * 100)) build_all runs; pass build_run_id to test an older one" >&2; exit 1; } + fi + read -r run_id head_sha created <<< "$found" + # the nightly fails rather than report on a stale build + if [ "$SCHEDULED" = true ] && [ $(( $(date +%s) - $(date -d "$created" +%s) )) -gt 172800 ]; then + echo "newest $BRANCH build $run_id is from $created, over 48 hours old" >&2 + exit 1 + fi + printf 'run_id=%s\nhead_sha=%s\n' "$run_id" "$head_sha" >> "$GITHUB_OUTPUT" cat "$GITHUB_OUTPUT" + echo "Testing build [$run_id](https://github.com/$GH_REPO/actions/runs/$run_id) of \`$head_sha\`, built $created" >> "$GITHUB_STEP_SUMMARY" effect: name: Override sweep effect stage (shard ${{ matrix.shard }}) diff --git a/.github/workflows/post_merge_profiles.yml b/.github/workflows/post_merge_profiles.yml index 67780e37bd..04ffd0429f 100644 --- a/.github/workflows/post_merge_profiles.yml +++ b/.github/workflows/post_merge_profiles.yml @@ -1,5 +1,14 @@ name: Post-merge profiles +run-name: >- + Post-merge profiles${{ + inputs.ofl_cron_dispatch_id != '' && + inputs.vendor == 'OrcaFilamentLibrary' && + (inputs.auto_publish == true || inputs.auto_publish == 'true') && + format(' [OFL cron {0}]', inputs.ofl_cron_dispatch_id) || + '' + }} + # Push-triggered counterpart to check_profiles.yml (which only gates PRs). When a # profile change lands on main or a release branch, rebuild the affected vendors' # binary preset caches (.opc) and publish each as a versioned ZIP asset on @@ -8,6 +17,19 @@ name: Post-merge profiles # only then does it become a live OTA update - this workflow does none of that # last part (no changelog, no R2, no webhook). # +# A workflow_dispatch carrying a `vendor` input (e.g. the daily OFL cron - OFL has +# no FOLDER_MERGERS grant, since it isn't merged through the PR merge-bot delegation +# scheme) publishes that vendor directly and skips the FOLDER_MERGERS check below. +# workflow_dispatch is already a trusted, explicit trigger, unlike the automatic +# push-diff path the FOLDER_MERGERS check exists to gate. +# +# Separately, an ordinary push whose diff touches an OrcaFilamentLibrary company +# folder (resources/profiles/OrcaFilamentLibrary/filament//**) records +# that PR as pending via POST /api/v1/ota/ofl/pending, regardless of whether +# OrcaFilamentLibrary as a whole is authorized to publish in this same run - a +# partner's OTA Manager dashboard should see a merged PR immediately, well +# before the daily cron actually builds and publishes it. +# # Asset contract expected by OrcaCloud's release scanner: # ^(\d+\.\d+\.\d+)_([^_]+)_(\d+(?:\.\d+){3})_(\d{12})\.zip$ # ___.zip (zip root: .opc) @@ -17,16 +39,45 @@ name: Post-merge profiles on: push: branches: + # once v2.5.0 stable is released, this will be removed, so nightly won't receive OTA updates. - main - - release/* + # release/vX.Y.Z point-release branches only, not the release/vX.Y working + # branch profile PRs land on first - "v*.*.*" requires two literal dots, + # which release/vX.Y (one dot) doesn't have. + - release/v*.*.* paths: - 'resources/profiles/**' - '.github/workflows/post_merge_profiles.yml' workflow_dispatch: + inputs: + vendor: + description: >- + Publish only this vendor, bypassing the FOLDER_MERGERS grant check. + For trusted explicit dispatches only (e.g. the OFL nightly cron). + Leave empty to fall back to diffing the triggering commit. + required: false + type: string + auto_publish: + description: >- + After publishing, also call the OTA auto-publish API to go live + immediately, skipping the human changelog/Publish step. Separate + from `vendor` on purpose: a maintainer can dispatch with just + `vendor` set to rebuild/republish an asset without it going live. + Only the OFL nightly cron should set this to true. + required: false + type: boolean + default: false + ofl_cron_dispatch_id: + description: >- + Unique marker supplied by the trusted OFL daily cron so it can find + and wait for this dispatched workflow run. + required: false + type: string permissions: contents: read + pull-requests: read # commits/{sha}/pulls lookup in the OFL-pending step # One run per branch; let a run finish rather than cancel it, since it publishes. concurrency: @@ -66,8 +117,38 @@ jobs: shell: bash env: FOLDER_MERGERS: ${{ vars.FOLDER_MERGERS }} + DISPATCH_VENDOR: ${{ github.event_name == 'workflow_dispatch' && inputs.vendor || '' }} run: | set -euo pipefail + + # A vendor has a manifest plus either a preset directory or a version + # field; this drops non-vendor files such as blacklist.json. Shared by + # both the explicit-dispatch path below and the push-diff path further + # down, so the definition of "valid vendor" can't drift between them. + is_valid_vendor() { + local v="$1" + local json="resources/profiles/$v.json" + [ -f "$json" ] && { [ -d "resources/profiles/$v" ] || jq -e '.version' "$json" >/dev/null 2>&1; } + } + + # Explicit vendor dispatch (e.g. the OFL cron): trust the caller and + # skip both the git-diff detection and the FOLDER_MERGERS check below. + if [ -n "$DISPATCH_VENDOR" ]; then + v="$DISPATCH_VENDOR" + # Becomes part of the release asset filename and the OTA API's + # payload; keep it to the same charset every real vendor name uses. + if ! [[ "$v" =~ ^[A-Za-z0-9]+$ ]]; then + echo "::error::vendor '$v' must be alphanumeric" + exit 1 + fi + if ! is_valid_vendor "$v"; then + echo "::error::vendor '$v' has no resources/profiles/$v.json with a profile directory or version field" + exit 1 + fi + echo "vendors=$v" >> "$GITHUB_OUTPUT" + exit 0 + fi + base='${{ github.event.before }}' head='${{ github.sha }}' # Zero SHA (branch created / force push) or manual dispatch: fall back @@ -75,6 +156,10 @@ jobs: if [ -z "$base" ] || [ "$base" = "0000000000000000000000000000000000000000" ] || ! git cat-file -e "$base^{commit}" 2>/dev/null; then base="$head^" fi + # Exposed so the OFL-pending step below can reuse this exact diff + # range instead of re-deriving it (and drifting from this logic). + echo "base=$base" >> "$GITHUB_OUTPUT" + echo "head=$head" >> "$GITHUB_OUTPUT" mapfile -t candidates < <( git diff --name-only "$base" "$head" -- resources/profiles \ | sed -nE 's#^resources/profiles/([^/]+)/.*#\1#p; s#^resources/profiles/([^/]+)\.json$#\1#p' \ @@ -84,10 +169,7 @@ jobs: vendors=() for v in "${candidates[@]:-}"; do [ -n "$v" ] || continue - json="resources/profiles/$v.json" - # A vendor has a manifest plus either a preset directory or a version - # field; this drops non-vendor files such as blacklist.json. - if [ -f "$json" ] && { [ -d "resources/profiles/$v" ] || jq -e '.version' "$json" >/dev/null 2>&1; }; then + if is_valid_vendor "$v"; then vendors+=("$v") fi done @@ -101,6 +183,9 @@ jobs: # sibling bundle JSON are covered by at least one FOLDER_MERGERS # grant. The account part is intentionally ignored here: this is a # post-merge safety check, not an authorization check for a command. + # An ineligible vendor (e.g. OrcaFilamentLibrary, which has no grant) + # is dropped on its own - it never blocks other vendors in the same + # push from publishing. grants=() while IFS= read -r raw_line; do line="${raw_line#"${raw_line%%[![:space:]]*}"}" @@ -127,23 +212,29 @@ jobs: return 1 } + authorized=() unauthorized=() for v in "${vendors[@]}"; do - if ! is_granted "resources/profiles/$v" || ! is_granted "resources/profiles/$v.json"; then + if is_granted "resources/profiles/$v" && is_granted "resources/profiles/$v.json"; then + authorized+=("$v") + else unauthorized+=("$v") fi done if [ "${#unauthorized[@]}" -ne 0 ]; then - echo "vendors=" >> "$GITHUB_OUTPUT" - exit 0 + echo "::warning::skipping vendor(s) with no FOLDER_MERGERS grant (no asset built or published for them this run): ${unauthorized[*]}" fi - echo "vendors=${vendors[*]}" >> "$GITHUB_OUTPUT" + echo "vendors=${authorized[*]}" >> "$GITHUB_OUTPUT" - name: Resolve Orca version id: orca - if: steps.vendors.outputs.vendors != '' + # Unconditional: needed both by the vendor-publish pipeline below (only + # when vendors is non-empty) and by the OFL-pending step at the end + # (which runs whenever OFL itself changed, even if vendors ends up + # empty because OFL has no FOLDER_MERGERS grant). Cheap and harmless + # to always resolve - version.inc is present on every commit. shell: bash run: | set -euo pipefail @@ -242,3 +333,132 @@ jobs: echo "### Published to \`$repo\` release \`$RELEASE_TAG\`" for f in "$ASSET_DIR"/*.zip; do echo "- \`$(basename "$f")\`"; done } >> "$GITHUB_STEP_SUMMARY" + + - name: Notify OTA auto-publish + # Gated on auto_publish specifically, not just "vendor was dispatched": + # a maintainer manually dispatching with vendor=OrcaFilamentLibrary (e.g. + # to rebuild/republish an asset while debugging) must not silently go + # live. Only a caller that explicitly opts in with auto_publish=true + # (the OFL nightly cron) skips the human changelog/Publish step. + if: >- + steps.vendors.outputs.vendors != '' && github.event_name == 'workflow_dispatch' + && (inputs.auto_publish == true || inputs.auto_publish == 'true') + shell: bash + env: + OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }} + OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }} + ASSET_DIR: ${{ steps.pkg.outputs.dir }} + run: | + set -euo pipefail + [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; } + [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; } + + mapfile -t zip_files < <(cd "$ASSET_DIR" && ls -1 *.zip) + filenames_json="$(printf '%s\n' "${zip_files[@]}" | jq -R . | jq -s .)" + payload="$(jq -n --argjson filenames "$filenames_json" '{filenames: $filenames}')" + + resp_file="$RUNNER_TEMP/ota-auto-publish-response.json" + status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \ + "${OTA_API_BASE_URL%/}/api/v1/ota/auto-publish" \ + -H "Authorization: Bearer $OTA_API_KEY" \ + -H 'Content-Type: application/json' \ + -d "$payload")" + body="$(cat "$resp_file")" + echo "$body" + + if [ "$status" != "200" ]; then + echo "::error::OTA auto-publish call failed with HTTP $status" + exit 1 + fi + + # A 200 can still carry per-file "error" results (e.g. NOT_FOUND); the + # asset is already safely published to the profiles release above, but + # it never went live, so treat that as a failure worth surfacing loudly. + error_count="$(jq '[.results[] | select(.status == "error")] | length' <<< "$body")" + if [ "$error_count" != "0" ]; then + jq -r '.results[] | select(.status == "error") | "::error::\(.filename): \(.code) - \(.message)"' <<< "$body" + exit 1 + fi + + - name: Record OFL pending changes + # A real merge, never the cron's explicit-vendor dispatch (that's + # automation publishing, not a new merge to report). This covers two + # trigger shapes: an ordinary push, and a vendor-less workflow_dispatch + # - the latter is exactly what pr-merge-bot.yml's re-dispatch after a + # successful /bot merge looks like (a GITHUB_TOKEN-authored merge fires + # no push event at all, which is why that re-dispatch exists). Both + # land in the same diff-fallback path in "Resolve changed vendors", so + # base/head/orca_ver are already correctly populated either way - only + # this condition needs widening. + # Placed last in the job on purpose: a failure here must never block + # the vendor-publish pipeline above, which a step failing earlier in + # the job would do (subsequent steps without always() get skipped). + if: >- + github.event_name == 'push' || + (github.event_name == 'workflow_dispatch' && !inputs.vendor) + shell: bash + env: + GH_TOKEN: ${{ secrets.GITHUB_TOKEN }} + OTA_API_BASE_URL: ${{ vars.OTA_API_BASE_URL }} + OTA_API_KEY: ${{ secrets.OFL_OTA_PUBLISH_KEY }} + run: | + set -euo pipefail + base='${{ steps.vendors.outputs.base }}' + head='${{ steps.vendors.outputs.head }}' + orca_ver='${{ steps.orca.outputs.orca_ver }}' + + # Only real vendor subdirectories under filament/, e.g. + # .../filament/Qidi/x.json -> "Qidi". This naturally excludes loose + # top-level files (.../filament/Generic PLA @System.json - no further + # slash to match) and is further filtered below to drop "base", the + # shared @base/@System inheritance folder, not a partner company. + mapfile -t ofl_companies < <( + git diff --name-only "$base" "$head" -- resources/profiles/OrcaFilamentLibrary/filament \ + | sed -nE 's#^resources/profiles/OrcaFilamentLibrary/filament/([^/]+)/.*#\1#p' \ + | grep -vx 'base' \ + | sort -u + ) + + if [ "${#ofl_companies[@]}" -eq 0 ]; then + echo "No OFL company folders changed in this push." + exit 0 + fi + + [ -n "$OTA_API_BASE_URL" ] || { echo "::error::vars.OTA_API_BASE_URL is not set"; exit 1; } + [ -n "$OTA_API_KEY" ] || { echo "::error::secrets.OFL_OTA_PUBLISH_KEY is not set"; exit 1; } + + # The head commit's own merged PR, not a per-commit walk: this + # assumes the ordinary one-PR-per-push shape every other merge path + # in this repo already assumes (pr-merge-bot.yml's re-dispatch logic + # does the same). A merge commit's parents don't matter here - this + # API call works the same regardless of merge strategy. + pr_json="$(gh api "repos/${{ github.repository }}/commits/$head/pulls" \ + --jq '[.[] | select(.merged_at != null)] | sort_by(.merged_at) | last // empty')" + + if [ -z "$pr_json" ]; then + echo "::warning::push $head touches OFL compan(y/ies) (${ofl_companies[*]}) but has no associated merged PR; skipping pending record(s)" + exit 0 + fi + pr_number="$(jq -r '.number' <<< "$pr_json")" + pr_url="$(jq -r '.html_url' <<< "$pr_json")" + pr_title="$(jq -r '.title' <<< "$pr_json")" + + for company in "${ofl_companies[@]}"; do + payload="$(jq -n --arg vendor "$company" --arg ver "$orca_ver" --argjson pr "$pr_number" \ + --arg url "$pr_url" --arg title "$pr_title" \ + '{vendor: $vendor, orcaSlicerVersion: $ver, prNumber: $pr, prUrl: $url, prTitle: $title}')" + + resp_file="$RUNNER_TEMP/ofl-pending-$company.json" + status="$(curl -sS -o "$resp_file" -w '%{http_code}' -X POST \ + "${OTA_API_BASE_URL%/}/api/v1/ota/ofl/pending" \ + -H "Authorization: Bearer $OTA_API_KEY" \ + -H 'Content-Type: application/json' \ + -d "$payload")" + body="$(cat "$resp_file")" + echo "$body" + + if [ "$status" != "200" ]; then + echo "::error::OFL pending record failed for vendor=$company (PR #$pr_number): HTTP $status" + exit 1 + fi + done diff --git a/.github/workflows/unit_tests.yml b/.github/workflows/unit_tests.yml index f5850d9fd7..41ef0b1f4b 100644 --- a/.github/workflows/unit_tests.yml +++ b/.github/workflows/unit_tests.yml @@ -44,6 +44,14 @@ jobs: uses: actions/download-artifact@v8 with: name: ${{ inputs.artifact }} + # run_unit_tests.sh installs the plugin tests' numpy with the uv the build stages + # beside them; the Windows arm64 build bundles none, so put one on PATH there. + - name: Install uv + if: runner.os == 'Windows' && runner.arch == 'ARM64' + uses: astral-sh/setup-uv@v10.2.0 + with: + version: "0.11.21" # ORCA_UV_VERSION in CMakeLists.txt + enable-cache: false - uses: lukka/get-cmake@latest with: cmakeVersion: "~4.3.0" # use most recent 4.3.x version diff --git a/.gitignore b/.gitignore index b029afa180..5224ecad6b 100644 --- a/.gitignore +++ b/.gitignore @@ -52,4 +52,6 @@ internal_docs/ __pycache__/ *.pyc *.opc -docs/superpowers/ \ No newline at end of file +/.test/ +docs/superpowers/ +ctest_results.xml diff --git a/CMakeLists.txt b/CMakeLists.txt index e3547281f0..3a7b8adf5f 100644 --- a/CMakeLists.txt +++ b/CMakeLists.txt @@ -56,9 +56,9 @@ You can do this in Environment Variables settings. endif () if (APPLE) - # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 11.3 + # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 12.0 (the lowest Xcode 27 accepts) if (NOT CMAKE_OSX_DEPLOYMENT_TARGET) - set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE) + set(CMAKE_OSX_DEPLOYMENT_TARGET "12.0" CACHE STRING "Minimum OS X deployment version" FORCE) endif () message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET: ${CMAKE_OSX_DEPLOYMENT_TARGET}") endif () @@ -70,6 +70,9 @@ if (POLICY CMP0092) cmake_policy(SET CMP0092 NEW) endif () +# project() reads this, so set it first. +set(CMAKE_USER_MAKE_RULES_OVERRIDE "${CMAKE_CURRENT_LIST_DIR}/cmake/modules/ClangClShowIncludes.cmake") + project(OrcaSlicer) # Backward compatibility for old CMake versions @@ -276,6 +279,11 @@ if (APPLE) endif() SET(CMAKE_XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER "com.orcaslicer.OrcaSlicer") + # The macOS CI jobs build with Ninja (build_release_macos.sh -x), so the Xcode generator + # is not covered. Xcode adds -Wshorten-64-to-32 by default ("Implicit Conversion to 32 Bit + # Type"); Ninja/-Wall does not, and under -Werror it fails Xcode builds on code CI accepts. + set(CMAKE_XCODE_ATTRIBUTE_GCC_WARN_64_TO_32_BIT_CONVERSION "NO") + message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}") elseif (CMAKE_SYSTEM_NAME STREQUAL "Linux") set(CMAKE_INSTALL_RPATH "$ORIGIN") @@ -1122,7 +1130,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls) ${_out_dir}/swresample-5.dll ${_out_dir}/swscale-8.dll ${_out_dir}/avutil-59.dll - PARENT_SCOPE ) list(APPEND _dll_list ${_occt_staged}) set(${output_dlls} ${_dll_list} PARENT_SCOPE) diff --git a/build_release_macos.sh b/build_release_macos.sh index b1de5df2e4..db03cb4ecd 100755 --- a/build_release_macos.sh +++ b/build_release_macos.sh @@ -53,7 +53,7 @@ while getopts ":dpa:snt:xbc:i:j:Tuh" opt; do echo " -s: Build slicer only" echo " -u: Build universal app only (requires existing arm64 and x86_64 app bundles)" echo " -n: Nightly build" - echo " -t: Specify minimum version of the target platform, default is 11.3" + echo " -t: Specify minimum version of the target platform, default is 12.0" echo " -x: Use Ninja Multi-Config CMake generator, default is Xcode" echo " -b: Build without reconfiguring CMake" echo " -c: Set CMake build configuration, default is Release" @@ -95,7 +95,7 @@ if [ -z "$DEPS_CMAKE_GENERATOR" ]; then fi if [ -z "$OSX_DEPLOYMENT_TARGET" ]; then - export OSX_DEPLOYMENT_TARGET="11.3" + export OSX_DEPLOYMENT_TARGET="12.0" fi if [ -z "$CMAKE_IGNORE_PREFIX_PATH" ]; then diff --git a/cmake/modules/ClangClShowIncludes.cmake b/cmake/modules/ClangClShowIncludes.cmake new file mode 100644 index 0000000000..91b9a18069 --- /dev/null +++ b/cmake/modules/ClangClShowIncludes.cmake @@ -0,0 +1,10 @@ +# ccache does not parse the -clang: arguments CMake uses for clang-cl's gcc-style +# depfile, so a cache hit writes the object and no depfile, and Ninja then records +# no headers for that object. ccache reproduces /showIncludes output on a hit. +foreach (_lang C CXX) + if (CMAKE_${_lang}_COMPILER_ID STREQUAL "Clang" AND + CMAKE_${_lang}_COMPILER_FRONTEND_VARIANT STREQUAL "MSVC") + set(CMAKE_DEPFILE_FLAGS_${_lang} "/showIncludes") + set(CMAKE_${_lang}_DEPFILE_FORMAT msvc) + endif () +endforeach () diff --git a/deps/CMakeLists.txt b/deps/CMakeLists.txt index e02186705b..502e5df071 100644 --- a/deps/CMakeLists.txt +++ b/deps/CMakeLists.txt @@ -26,9 +26,9 @@ endif() cmake_minimum_required(VERSION 3.2) if (APPLE) - # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 11.3 + # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 12.0 (the lowest Xcode 27 accepts) if (NOT CMAKE_OSX_DEPLOYMENT_TARGET) - set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE) + set(CMAKE_OSX_DEPLOYMENT_TARGET "12.0" CACHE STRING "Minimum OS X deployment version" FORCE) endif () message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET: ${CMAKE_OSX_DEPLOYMENT_TARGET}") @@ -38,6 +38,14 @@ if(POLICY CMP0135) # DOWNLOAD_EXTRACT_TIMESTAMP cmake_policy(SET CMP0135 NEW) endif() +# project() reads this, so set it first. scripts/flatpak/make_deps_tar.sh packs deps/ +# without cmake/, so the file is missing in a Flatpak build. +set(_rules_override "${CMAKE_CURRENT_LIST_DIR}/../cmake/modules/ClangClShowIncludes.cmake") +if (EXISTS "${_rules_override}") + set(CMAKE_USER_MAKE_RULES_OVERRIDE "${_rules_override}") +endif () +unset(_rules_override) + project(OrcaSlicer-deps) # Backward compatibility for old CMake versions @@ -220,6 +228,7 @@ if (NOT IS_CROSS_COMPILE OR NOT APPLE) -DCMAKE_CXX_COMPILER:STRING=${CMAKE_CXX_COMPILER} -DCMAKE_C_COMPILER_LAUNCHER:STRING=${CMAKE_C_COMPILER_LAUNCHER} -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=${CMAKE_CXX_COMPILER_LAUNCHER} + -DCMAKE_USER_MAKE_RULES_OVERRIDE:STRING=${CMAKE_USER_MAKE_RULES_OVERRIDE} -DCMAKE_TOOLCHAIN_FILE:STRING=${CMAKE_TOOLCHAIN_FILE} -DCMAKE_EXE_LINKER_FLAGS:STRING=${CMAKE_EXE_LINKER_FLAGS} -DCMAKE_SHARED_LINKER_FLAGS:STRING=${CMAKE_SHARED_LINKER_FLAGS} @@ -267,6 +276,7 @@ else() -DCMAKE_IGNORE_PREFIX_PATH:STRING=${CMAKE_IGNORE_PREFIX_PATH} -DCMAKE_C_COMPILER_LAUNCHER:STRING=${CMAKE_C_COMPILER_LAUNCHER} -DCMAKE_CXX_COMPILER_LAUNCHER:STRING=${CMAKE_CXX_COMPILER_LAUNCHER} + -DCMAKE_USER_MAKE_RULES_OVERRIDE:STRING=${CMAKE_USER_MAKE_RULES_OVERRIDE} -DBUILD_SHARED_LIBS:BOOL=OFF ${_cmake_osx_arch} "${_configs_line}" diff --git a/docs/HLSD/deferred-page-construction.md b/docs/HLSD/deferred-page-construction.md new file mode 100644 index 0000000000..6a25d16fc3 --- /dev/null +++ b/docs/HLSD/deferred-page-construction.md @@ -0,0 +1,137 @@ +# Deferred Page Construction: High Level Design + +## Why it exists + +The main window is a notebook of tabs, and only one of them is on screen when the first +frame appears. Others are opened later in the session, some never, and some only exist +for certain printers. Building every tab before the first frame makes each startup pay for +tabs the user may never open. + +This subsystem builds a tab the first time it is shown, and builds the rest in small units +while the user is idle after startup. Startup pays only for what the first frame shows, +the other tabs are usually ready before anyone opens them, and a click that lands in the +middle of the idle build waits for one unit at most. Work that is not a tab, such as a +dialog or the 3D view's GL resources, uses the same machinery. + +## The parts + +The parts are independent. A holder can hold anything a factory makes, a placeholder page +is a holder with a widget, a staged object can live outside a holder, and the scheduler +knows none of them; it runs tasks, which the main window makes from the holders. + +### The holder: `Lazy` + +A holder keeps one object and the factory that makes it. The rest of the app reads the +object if it exists, makes sure it exists now when about to show or navigate to it, or runs +something once it exists. A type with one instance in the app gets these as statics +through `LazyInstance`, so callers need no reference to the main window, and all of them +are harmless while no holder exists. + +The holder guarantees that callers see the object only once it is completely built. A +build cannot re-enter itself, so a nested request finds nothing yet, and a factory that +returns null or a unit that throws leaves the holder and the scheduler able to carry on. +The holder does not own the object; its wx parent does, as for any window. The holder has +no wx dependency and is unit-tested. + +### The placeholder page: `LazyPage` + +The notebook needs a page object for a tab to exist and for tabs to be inserted and +removed by pointer, and the placeholder is that object. It builds the real panel inside +itself the first time it is shown and forwards showing and hiding afterwards, so a panel's +own show handling stays its activation hook. Nothing builds while the main window is +hidden; the window's first show builds the start page. A page that is out of the book is +not prebuilt. A panel built while its page is hidden stays hidden, and gets the theming +the window applied before the panel existed. + +### Staged construction: `StagedBuild` + +A constructor too big to be one unit builds a skeleton and queues the rest as steps, which +run one per unit. A child panel's steps can be forwarded to its parent, and the parent is +complete only once the child is. Nothing may use what a step builds before the last step +has run, so staged panels follow these constraints: + +- members created in steps start out null, so a partly built panel can be destroyed; +- timers, event handlers and destructors that touch step content check that the panel is + complete first; +- nothing takes focus while off screen, since a unit may run while the user is typing + elsewhere; +- a widget added by a step keeps its place in the sizer through an empty slot the skeleton + creates. + +### The scheduler: `IdleScheduler` and `PrebuildQueue` + +The queue holds tasks in order, and a slice runs units of the first pending task until +the task finishes, the time budget is spent, or input arrives. It has no wx dependency and +is unit-tested with a fake clock. A task whose work goes away, such as a tab removed from +the book, is skipped, and becomes pending again if the work comes back. + +A slice runs only once the user has been idle for a short quiet time, and each slice is its +own timer message, so paint, timers and input queued in between are handled before the +next slice. Posting slices as pending events would not do that, because wx drains every +pending event before the next native message. On GTK a timer that is always due starves +the lower-priority sources that repaint and deliver posted events, so slices are a few +milliseconds apart. On Windows a slice also waits while the native queue holds input, +not counting mouse moves, which Windows synthesizes whenever a window appears under the +cursor. A slice never runs inside a `wxYield()`, where it would build pages in the middle of +the code that yielded. A unit cannot be interrupted, so the largest unit bounds how long a +click can wait. +When nothing is pending the timer stops and the subsystem costs nothing. + +The main window owns the scheduler because it owns what the tasks build, and clearing the +queue with the window keeps a task from outliving its object. Each owner provides its own +tasks, such as a tab, a dialog, the Prepare tab's settings page one option group at a +time, the Prepare page's layout at the size the book gives its pages, or the 3D view's GL +resources. + +### The 3D view's GL resources + +OpenGL is loaded on the Prepare tab's canvas. When the start page is not Prepare, loading +it is an idle task that makes the context current on the hidden canvas, so the start page +paints first and Prepare never appears. Loading it on a shown canvas under `Freeze()` holds +back the start page's paint, and on GTK `Freeze()` cannot hide the canvas, which is a +native child window or a Wayland subsurface drawn outside GTK. A hidden Windows child +window keeps its device context, macOS attaches the context to a hidden view, and GTK +creates the canvas's surface when the widget is realized, so on GTK the task realizes the +canvas first. If the context cannot be made current, the canvas's first render loads the +resources. + +## Rules + +**Before the first frame.** Only the start page and the Prepare tab's plater are built +before the first frame. Everything else goes through a holder. + +**Reaching a lazy object.** Callers use the type's statics. Reading it if built is for +things the object can live without, such as a rescale, a color change or a status refresh. +Making sure it exists is for navigating to it or showing it. Running something once it is +built is for state it would not fetch for itself on construction. A panel that pulls its +state when constructed only ever needs to be read if built. + +**Unit size.** A unit should fit in one slice on a fast machine. A constructor over that is +staged, and a single widget over it is accepted unless the widget itself can be split. + +**Order.** Tasks run cheapest and most likely to be opened first. Each holder's order is +given where it is created, with gaps so a new task fits between its neighbors. A negative +order is never prebuilt, for something few sessions open that costs more to build unasked +than it saves. + +## Adopting it + +A lazy tab needs a panel type deriving from `LazyInstance`, a placeholder page the main +window creates once with its order and registers for the idle build, and every use of the +panel outside the main window going through the statics. Its constructor has to cope with +the main window already existing and the user being busy elsewhere, so it takes no focus +while off screen, and it does all of its own setup, since the main window does nothing to a +panel after creating it. + +To stage a heavy constructor, keep the skeleton in the constructor, move the rest into +steps in its original order, and follow the staged-construction constraints. Measure the +units; a step that is still one big widget is split inside the widget or accepted. + +## Verifying + +The log lists the queue when it is registered, reports each completed task at info level +and each slice and unit at debug level, and reports every on-demand build with its units +and time. A task's completion line counts only the slice it finished in. A run from the +configured start page should show every registered task complete in order, with no unit +longer than intended. A click on a tab during the idle build should show an on-demand +build for what was left, with the slices resuming once the user is idle again. diff --git a/docs/HLSD/multiline-infill.md b/docs/HLSD/multiline-infill.md new file mode 100644 index 0000000000..2f68fe3ef9 --- /dev/null +++ b/docs/HLSD/multiline-infill.md @@ -0,0 +1,129 @@ +# Multiline infill — High Level Design + +## Purpose and scope + +`fill_multiline` prints every sparse infill wall as N adjacent lines instead of +one, so a wall is `d1 = N * spacing` thick. Only internal sparse infill uses it. +Each pattern first builds its single-line centerlines at N times the usual line +spacing (so the density holds), and `multiline_fill()` then replaces each +centerline by the lines of that wall: the centerline itself when N is odd, and +closed outlines around it at every `spacing` out to `d1 / 2`. The outlines are +clipped to the fill region contracted by half a line width, then connected like +any other infill. + +Outlines of centerlines that cross each other overlap at every crossing, which +over-extrudes the wall intersections. The line-crossing patterns Grid, +Triangles, Tri-hexagon and Cubic therefore build centerlines that never cross +(`FillRectilinear::fill_surface_trapezoidal()`), and so do Adaptive Cubic and +Support Cubic (`FillAdaptive`); the other patterns outline their usual +centerlines. + +## Non-crossing centerlines + +The crossing lines are resolved into x-monotone paths, the levels of the line +arrangement: walking along x, the k-th path is always the k-th line from the +bottom. At every crossing, the two paths bounce off each other instead of +passing through. Adjacent paths meet only at crossings, so their outlines touch +there and nowhere overlap. + +Where two paths meet, each is cut short by a line perpendicular to the bisector +of its bend, `d1 / 2` from the crossing. The two cut segments are parallel and +`d1` apart, so the outermost lines of the two walls sit exactly `spacing` apart, +like the lines inside a wall. Where three lines meet at one point, the middle +path runs straight through and the outer two are cut `d1` from it. + +Each pattern builds its rows along x in a rotated frame. Grid lines run at ±45° +there, and its rows are trapezoid waves that transpose on alternate layers. The three families of Triangles, Tri-hexagon and +Cubic run at 0°, 60° and 120°. Those rows rotate by 120° every layer about a +3-fold center of the arrangement, so each family takes every role in turn. +The pattern is phased on fixed positions, so it lines up across layers and +across the regions of one layer. Rounding the corners with +`sparse_infill_smooth_factor` happens before `multiline_fill()`. + +Each region builds only the rows over its bounding box in that frame, and +outlines only the centerlines within `d1 / 2` of it, the ones whose outlines +reach it. Every row is monotone along its direction, so each outline is started +on the cap at the first end of its centerline, outside the region, and clipping +to the region cuts it only where it crosses the boundary. + +## Cubic + +Single-line Cubic draws the three families at the same spacing `h` and shifts +them with z: by `+dx`, `-dx` and `+dx`, `dx = z / sqrt(2)`. The multiline paths +follow the same lines. In the frame where one family is horizontal, the other two +cross in rows `h` apart, alternating by half a period, at height +`tau = -3 * dx (mod h)` above the horizontal line below them. The crossings split +every band between horizontal lines into up-pointing triangles of height `tau`, +down-pointing triangles of height `h - tau`, and hexagons. At `tau = 0` (and `h`) +all three families meet at common points, as in Triangles. At `tau = h / 2` the +triangles are equal, as in Tri-hexagon. The origin of that frame is always a +3-fold center, whatever z is, so the per-layer rotation keeps the lines in place. + +Each band holds two paths that touch at its crossings: the upper one takes the +V below the crossing and runs along the top horizontal line, and the lower one +takes the inverted V above it and runs along the bottom line. Both are the same function +of `tau`, the lower one mirrored with `h - tau`. `cubic_upper_level()` builds one +period of the upper path as the lower envelope of five lines, clipped from below: + +- the two slanted lines through the crossings, +- the horizontal line, lowered when the triangle above it is less than `1.5 * d1` high, +- the two chamfers where the path turns onto and off the horizontal line, `d1 / 2` + from those crossings, +- the flat cut into the V at the crossing. + +The cut height `clamp(tau - d1 / 2, 0, h - d1) + d1` is what makes the pattern +continuous in z. While both triangles are at least `1.5 * d1` high, every +crossing is a pair of bends `d1 / 2` from it, as in Tri-hexagon. When a triangle +is thinner, its three paths stack like a triple crossing. The path through it +flattens toward its base line and lies on it once the triangle is under `d1 / 2` +high, and the paths beside it are pushed `d1` away. The layout thus reaches the +Triangles one where the families meet. Adjacent paths stay at least `d1` apart +at every `tau` and at every density up to 100%. + +## Adaptive Cubic + +Adaptive Cubic and Support Cubic take their lines from an octree of cubes +standing on a corner. On each layer every cube cuts its three mid-planes into +segments of the same three 60° families as Cubic, but the pattern is not +periodic. Smaller cubes near the surface add finer lines, and a finer line ends +where it meets the wall of its coarser cube, so the lines form crossings and +T-junctions. `FillAdaptive::multiline_paths()` builds the paths from these +segments directly, for each fill region and within `4 * d1` of it. + +At a crossing the two paths bounce as in Cubic. At a T-junction the through line +runs straight on and the path of the ending line stops there. Every path still +runs left to right in the frame where one family is horizontal, and that family +rotates with the layer. + +Every line of every cube size lies on one fine lattice, so crossings closer than +a few `d1` are the corners of one small triangle of that lattice, as in Cubic. +The cuts follow the Cubic rules without a closed formula: + +- The two bends of a crossing are cut `d1` apart, `d1 / 2` each, perpendicular + to their bisector, so their walls touch. A cut goes no further than the path + end, and the other bend takes the rest of `d1`. +- At the tip of a small triangle, between the two slanted families, a cut also + goes no further than the neighbouring bend turning the other way, and the + path beyond that bend is kept a wall away from it. The bends onto the + horizontal family are not limited this way: pushing their paths apart would + open gaps between walls that should touch. +- A cut moves the path only where the cut line lies beyond it, near its bend. + The sharp bends between the two slanted families are cut after the bends onto + the horizontal family, so the tip of a small triangle wins, as in Cubic. +- A path stopping at a T-junction is trimmed until it is `d1` less half a line + spacing from every other path, so that its end overlaps the wall it stops on + by half a line and bonds to it. The paths are trimmed one at a time against + the others as already trimmed, so two ends facing each other meet instead of + both backing off. A path stopping on the line of another is trimmed before + that one, so it gives way and the other still reaches the line it stops on. A + second round trims every path again from its full length, so an end grows + back where the ends it gave way to were trimmed later, and a last round only + shortens them, keeping them that far apart. Paths shorter than `d1` are left + out. +- A line that ends on another less than `2 * d1` past a crossing stops at that + crossing instead, the shorter one where both do. The path along such a stub + would be trimmed away, leaving a hole between the walls that were cut to + touch it. + +Short paths enclosed by coarser lines still print as closed outlines, but most +paths run on across several cells. diff --git a/docs/HLSD/precise-seam.md b/docs/HLSD/precise-seam.md new file mode 100644 index 0000000000..2976e8c7c2 --- /dev/null +++ b/docs/HLSD/precise-seam.md @@ -0,0 +1,239 @@ +# Precise Seam — High Level Design + +## Purpose and scope + +Precise Seam places the seam where a helper volume intersects the external +wall. The user attaches a mesh to an object as a Precise Seam modifier, and on +every layer the seam placer reads the modifier's slice to decide where the seam +of each external perimeter may, must or must not go. The same mesh keeps +working after the model changes, so the seam does not have to be repainted +after every design revision, and a swept helper body can guide the seam along +any path. + +The modifier is non-printing geometry. It does not take part in slicing, region +assignment, filament selection or brim adhesion. It affects only seam +placement, which runs during G-code export. + +## Volume types and priority + +Precise Seam adds six `ModelVolumeType` values after `SUPPORT_ENFORCER`. The +strong types come first and the weak types follow. `is_precise_seam()`, +`is_precise_seam_strong()` and `is_precise_seam_weak()` are range checks that +depend on this order. + +| Type | Group | Effect on the perimeter | +| --- | --- | --- | +| `PRECISE_SEAM_CENTER` | strong | seam at the arc-length midpoint of the intersection | +| `PRECISE_SEAM_LEFT` | strong | seam at the first point of the intersection | +| `PRECISE_SEAM_RIGHT` | strong | seam at the last point of the intersection | +| `PRECISE_SEAM_ENFORCED` | weak | intersection marked as enforced | +| `PRECISE_SEAM_BLOCKED` | weak | intersection marked as blocked | +| `PRECISE_SEAM_NEUTRAL` | weak | intersection reset to neutral | + +A strong modifier fixes one point. A weak modifier only changes the +enforced/blocked type of seam candidates, and the configured seam position then +chooses among them. First and last are taken along the perimeter made +counter-clockwise seen from above. On an outer wall seen from outside, Left is +the left end of the intersection. On the wall of a hole seen from inside the +hole, the two ends are swapped. + +The order of volumes in the object is the priority order, highest first. +`ModelObject::sort_volumes()` keeps every strong modifier before every weak one +and preserves the user's order within each group. The object list lets the user +drag a modifier only within its own group. A type change that crosses a group +boundary moves the volume to the end of its new group, where it has the lowest +priority. Strong modifiers are tried in this order, and the first one that +yields a seam on a perimeter wins. Weak modifiers are applied from the lowest +priority to the highest, so the highest one overwrites any overlapping zone. + +## Model storage and 3MF compatibility + +Projects must stay readable by earlier releases, and the modifier must not +change a print there. Both 3MF writers therefore store a Precise Seam volume as +an ordinary parameter modifier: `modifier_part` in the Bambu-format part +subtype, and `ParameterModifier` together with the legacy `modifier` flag in +the Prusa-format volume metadata. The seam mode is written separately under +`precise_seam_type`, using the names from `ModelVolume::type_to_string()` +(`precise_seam_center` and so on). + +On load, the mode applies after all other volume metadata, regardless of XML +key order, and only when the base type is a modifier. Missing or unknown modes +leave an ordinary modifier. Seam metadata on any other base type is ignored. +Files that stored the seam mode directly as the volume type still load. + +A Precise Seam volume keeps any per-volume settings it had as a part or +modifier, but they are inactive and the object list shows no settings item for +it. The writers prefix these keys with `precise_seam_config:`, so an earlier +reader drops them as unknown options. The volume therefore loads there as a +modifier without settings and has no effect on the print. The current reader +restores the keys only when the volume ends up as a Precise Seam type, so the +settings return when the user changes the type back. Configuration values are +XML-escaped in both writers, for every volume type. + +## Print invalidation + +`Print::apply()` compares the Precise Seam volumes of each object by type, ID +and transformation. Adding, removing, moving, reordering or retyping one +cancels background processing and invalidates only `psGCodeExport`; the sliced +layers are kept. `model_volume_list_update_supports_and_seams()` then brings +the support and Precise Seam volumes of the print's model copy in line with the +new model in one pass. A volume may switch between the two families, since +neither affects slicing. A conversion to or from a part or ordinary modifier +changes the solid and modifier volume lists and reslices as before. + +## Modifier slices + +`SeamPlacer::init()` collects the Precise Seam volumes of each object once: +strong ones in priority order and weak ones reversed. It slices each volume +separately with `PrintObject::slice_single_volume()`, which shares +`slice_modifier_volumes()` with support blockers and enforcers but does not +merge volumes, so each keeps its own priority. The result is cached per volume +and indexed by object layer; `Layer::id()` includes raft layers, which are +subtracted. Seam candidates are then gathered in parallel over the layers and +read the cache without locking. + +Objects without Precise Seam volumes follow the unchanged seam placement path. +For objects that have them, perimeter extraction also removes consecutive +duplicate points and the repeated closing point of each extrusion loop. +Zero-length edges at path junctions would otherwise prevent point insertion +there. Distinct visits to one point of a self-touching contour are kept. + +## Finding the wall segment + +The seam placer works on the external perimeter loops of each layer, both +outer contours and holes, each made counter-clockwise. For every modifier +polygon on the layer that overlaps the perimeter's bounding box, the region +enclosed by the perimeter is clipped against the modifier polygon. The boundary +of each intersection polygon alternates between runs that follow the perimeter +and runs that follow the modifier outline. The wall segment is the longest +continuous run of intersection vertices that lie on the perimeter, measured in +vertices. + +The fast path first finds an intersection vertex that exactly matches a +perimeter vertex. It then walks forward and backward, expecting the adjacent +perimeter vertex and falling back to projection when Clipper has merged or +split collinear edges. A vertex counts as on the perimeter when its projection +is within about 1.6 nm, which covers Clipper's rounding. If no vertex matches +exactly, or every vertex lies on the perimeter, the general path projects all +vertices. When every vertex is on the perimeter, the edge midpoints are checked +instead: a modifier chord can join two perimeter vertices directly, and the +chords split the vertex ring into runs. If no edge leaves the perimeter, the +perimeter lies entirely inside the modifier. + +`Polygon::point_projection()` optionally reports the edge that holds the +projection, and every point of the segment keeps the index of its perimeter +edge. New points are inserted on that edge. A point within 1 µm of an existing +vertex snaps to that vertex instead. + +## Strong modifiers + +For a strong modifier, the target is the first point, the last point or the +arc-length midpoint of the segment. The midpoint is projected back onto the +original perimeter, because Clipper may have merged several perimeter edges +into one segment edge. The target is inserted into the perimeter, and a helper +point is inserted 1 µm before and after it. Strong modifiers are tried in +priority order, the first valid intersection decides the seam, and weak +modifiers are not processed for that perimeter. + +When candidates are built, the inserted point is the only enforced candidate +and becomes the central enforcer; every other candidate is blocked. The seam +position modes then pick that point: Aligned and Aligned Back prefer the central +enforcer, while Back, Random and Nearest rank enforced candidates above blocked +ones. Alignment and random placement can still move the final position along an +edge. After alignment, `restore_precise_seam_positions()` writes the exact point +and its index back into every perimeter that has a strong seam. Inner walls take +their seam from the external seam as usual, including staggering. + +## Weak modifiers + +Weak modifiers produce one segment per intersection polygon, so one modifier can +mark several zones on one perimeter. All segment boundaries are inserted into +the perimeter in order of decreasing arc length. Each insertion then leaves the +indices of the pending, shorter ones unchanged; a point on the closing edge is +appended rather than inserted at index zero. A helper point is added 1 µm +outside each boundary. Random placement picks a position along the edge that +follows a candidate. These helpers keep that edge 1 µm long at each boundary, so +a zone cannot extend or intrude further than that. Boundaries that coincide +share their helper points. + +The zone types are then resolved in priority order, and the edges of enforced +zones are subdivided into steps of at most +`SeamPlacer::enforcer_oversampling_distance` (0.2 mm). The middle candidate of +the longest enforced patch is therefore close to the geometric middle of the +zone. That patch is measured in candidates, across the closing edge, regardless +of where the contour starts; the same rule applies to painted seams. + +Candidates first receive their type from seam painting. The weak zones then +overwrite it, lowest priority first. Blocked and Enforced zones therefore take +precedence over painting, and Neutral clears painting inside its zone. + +## Unsupported geometry and warnings + +Some modifier shapes cannot be resolved to one seam or one zone per crossing. +They are detected cheaply and reported rather than guessed: + +- A strong modifier that crosses a perimeter in more than one place uses only + its first valid segment. The other crossings are ignored. +- A modifier that crosses the whole region enclosed by the perimeter is + detected when the modifier outline minus that region leaves more than one + piece, none of them a hole. Its intersection holds two wall runs, and only + one of them is used. +- A modifier whose slice has a hole on a layer, found as a clockwise polygon in + the flattened slice, is skipped on that layer. The flattened slice no longer + records which hole belongs to which contour. +- A perimeter that lies entirely inside a modifier is ignored by that modifier. + +The conditions are atomic flags shared by all layers and objects. After all +objects are processed, `SeamPlacer::init()` issues at most one non-critical +warning with the ID `SlicingPreciseSeamWarning`. The warning is a single line +that lists every cause found, because the export warnings dialog shows only the +first line of each warning. Repeated warning events replace this notification +instead of appending text to it. + +## User interface + +- *Add Precise Seam* in the object menu creates a Center modifier from a + primitive or a loaded mesh. Text and SVG volumes cannot become Precise Seam + modifiers: the menu does not offer them, and `ObjectList::set_volume_type()` + refuses the change. +- *Change Type* has a single *Precise Seam* entry. It converts other volumes to + Center and keeps the mode of volumes that are already Precise Seam. The + *Precise Seam Type* submenu appears only when every selected item is a + Precise Seam volume, including settings rows that resolve to one. It sets the + chosen mode on all selected volumes. +- Each mode has its own icon in the object list and its own color in the 3D + view, at 60% opacity: warm oranges for the strong modes, and green, red and + gray for Enforced, Blocked and Neutral. +- Object list drops map visible rows to volume indices while skipping hidden + cut connectors, and they refresh the row-to-volume map of the object. +- Precise Seam volumes have no filament, block pasting into SLA, and are exposed + to Python plugins as `ModelVolumeType` values plus the `is_precise_seam*()` + methods. + +## Implementation and verification + +- [PreciseSeam.cpp](../../src/libslic3r/GCode/PreciseSeam.cpp) implements segment + detection, point insertion, weak-zone resolution and position restoration. + [SeamPlacer.cpp](../../src/libslic3r/GCode/SeamPlacer.cpp) integrates it into + candidate gathering and issues the warning. +- [Model.hpp](../../src/libslic3r/Model.hpp) defines the types and their order, + [PrintApply.cpp](../../src/libslic3r/PrintApply.cpp) handles invalidation, and + [PrintObjectSlice.cpp](../../src/libslic3r/PrintObjectSlice.cpp) slices the + modifiers. [bbs_3mf.cpp](../../src/libslic3r/Format/bbs_3mf.cpp) and + [3mf.cpp](../../src/libslic3r/Format/3mf.cpp) store them. +- [GUI_Factories.cpp](../../src/slic3r/GUI/GUI_Factories.cpp) and + [GUI_ObjectList.cpp](../../src/slic3r/GUI/GUI_ObjectList.cpp) provide the menus, + type changes and ordering. +- [Precise Seam tests](../../tests/fff_print/test_precise_seam.cpp) cover the + strong positions, including a midpoint on an existing vertex or the closing + edge. They also cover shared and coincident weak boundaries, every warning, + and the priority order. +- [Seam placer tests](../../tests/fff_print/test_seam_placer.cpp) cover + enforced-patch selection independent of the contour start, fully painted + contours, duplicate removal, and `Print::apply()` synchronization through + type changes and restored model snapshots. +- [3MF tests](../../tests/libslic3r/test_precise_seam_3mf.cpp) cover the round + trip of every mode and of inactive settings, attribute escaping, and which + metadata combinations restore a seam mode. + [Plugin tests](../../tests/slic3rutils/test_precise_seam_plugin.cpp) cover the + Python bindings. diff --git a/docs/HLSD/preset-cache.md b/docs/HLSD/preset-cache.md index 6e693dbd6f..666e452f1e 100644 --- a/docs/HLSD/preset-cache.md +++ b/docs/HLSD/preset-cache.md @@ -76,9 +76,10 @@ and the count of errors the original parse hit. Each entry is one preset **in source form**: what its JSON sub-file states and nothing that resolving it derives — the preset's own config diff, the name of the preset it -inherits, and the parse metadata (name, sub-path, description, instantiation, setting -and filament ids, renames). Non-instantiated base presets are stored too; the children -that inherit from them cannot resolve without them. +inherits, the names of the presets it includes, and the parse metadata (name, sub-path, +description, instantiation, setting and filament ids, renames). Non-instantiated base +presets are stored too; the children that inherit from or include them cannot resolve +without them. **The payload names its own keys.** The dictionary holds the distinct `opt_key`s the file uses, the `ConfigOptionType` each was written as, and the distinct enum *value @@ -161,9 +162,9 @@ cache nothing can invalidate is worse than no cache. Vendors load in a fixed order, because filament inheritance crosses exactly one boundary: any vendor's filament may inherit from the shared Orca filament library, -and nothing else reaches across vendors. The library therefore goes first, alone; -every other vendor follows in parallel, resolving against it; and the results are -merged in a stable order: +and nothing else reaches across vendors — an `include` is always vendor-local. The +library therefore goes first, alone; every other vendor follows in parallel, resolving +against it; and the results are merged in a stable order: ```mermaid flowchart LR @@ -211,13 +212,16 @@ and its cache was never written back. Serving from a cache is not a memory-image restore. The entries are deserialized and then installed one by one — inheritance resolved against the presets installed before -them and the currently loaded filament library, configs flattened onto the collection -defaults, validated and registered — by the same function the JSON path calls straight -after parsing a sub-file. The two paths share everything below the parse, which is what -makes a cache-loaded bundle indistinguishable from a JSON-loaded one by construction -rather than by test coverage. Installation also rebuilds each preset's file path from -the local data directory, so a shipped cache never carries the generating machine's -paths. +them and the currently loaded filament library, includes layered in, configs flattened +onto the collection defaults, validated and registered — by the same function the JSON +path calls straight after parsing a sub-file. An `include` layers what the included +base states, between the parent and the preset's own keys: the base's diff against the +default, taken when the base itself was installed and before the per-variant padding +`inherits` sees, so only what a template sets reaches the presets including it. The two +paths share everything below the parse, which is what makes a cache-loaded bundle +indistinguishable from a JSON-loaded one by construction rather than by test coverage. +Installation also rebuilds each preset's file path from the local data directory, so a +shipped cache never carries the generating machine's paths. App upgrades work because a cache normally survives one. Only a deliberate `CACHE_VERSION` bump makes an installed cache unreadable, and that is handled at diff --git a/docs/HLSD/prime-tower-sparse-layers.md b/docs/HLSD/prime-tower-sparse-layers.md new file mode 100644 index 0000000000..19802c9169 --- /dev/null +++ b/docs/HLSD/prime-tower-sparse-layers.md @@ -0,0 +1,197 @@ +# Prime tower sparse layers — High Level Design + +## Purpose and scope + +A prime tower exists to absorb filament changes, but it is planned on every +object layer below the topmost change, not only on the layers that purge. The +layers in between carry no filament change and print nothing but a block of the +tower's own footprint to keep its top level. They are called sparse layers, and +on a print with few changes they are most of the tower: they cost time, filament +and a travel to the tower on every layer. + +Two settings trade that cost against something else. `wipe_tower_no_sparse_layers` +drops them, which sinks the tower below the model. `wipe_tower_sparse_layers_combination` +merges runs of them into fewer, thicker layers, which keeps the tower level with +the model. Both are off by default, and with both off the tower prints one layer +per object layer as it always has. + +The decisions belong to tower planning and G-code emission. They do not change +sliced object geometry, but they do change the emitted G-code, the filament and +time estimates, and — for the compacted case — whether a plate is printable at +all. Changing either setting invalidates the tower step. + +## What a sparse layer is + +`ToolOrdering::fill_wipe_tower_partitions` counts the filament changes per layer +and propagates that count downwards, so every layer below the topmost change is +marked as carrying a tower. It then fills any gap between two tower layers, so +the tower is continuous from the bed to its last purge. `wipe_tower_layer_height` +is the distance from the previous tower layer, which is the object's layer height +whenever the tower prints on every layer. + +`Print::_make_wipe_tower` plans one tower layer per such object layer. A layer +whose only call keeps the current filament leaves no toolchange in the plan, and +the layer it generates is a single result whose initial and new tool are equal. +That is what `wipe_tower_layer_is_sparse` recognises, and it is the unit both +settings work on. + +The plan stays one entry per tower layer in every case. The G-code emitter walks +`WipeTowerData::tool_changes` by layer index, advancing once per object layer +that carries a tower, so a planner that removed entries would silently shift +every later layer onto the wrong tower geometry. Layers that print nothing are +therefore still planned and still generated; they are marked, and the emitter +drops them. + +## Shared rules + +Tower planning, G-code emission and the plate validation all have to agree about +which layers print and where. They ask one set of free functions, declared beside +the tower classes, rather than each re-deriving the answer from the raw options: + +- `wipe_tower_sparse_layers_skipped` — whether sparse layers are really dropped. + Smooth timelapse and clumping detection park the nozzle on the tower every + layer, so with either of them on no layer is ever dropped and the option reads + as off everywhere. +- `wipe_tower_sparse_layers_combined` — whether runs are really merged. The same + two rule it out, and so does `wipe_tower_no_sparse_layers`: dropping the layers + outright is the stronger answer to the same problem, so the two settings are + exclusive and the GUI greys out the second while the first is on. +- `wipe_tower_layer_is_sparse`, `wipe_tower_layer_is_combined_away` — per-layer + questions the emitter asks about generated results. +- `compute_compacted_wipe_tower_z` — the tower's print z per planned layer when + it is compacted. +- `combine_sparse_wipe_tower_layers` and its `combine_sparse_wipe_tower_plan` + wrapper — the merge rule, applied to either generator's plan. + +Both tower generators are driven through these. `WipeTower` (Type 1, the block +tower) and `WipeTower2` (Type 2, the default) keep separate plans with the same +per-layer shape — print z, layer height, toolchanges, and a `combined_away` flag +— so one template covers both. + +## Dropping sparse layers + +With `wipe_tower_no_sparse_layers`, the tower only grows on layers that carry a +real change. It therefore falls one layer height behind the object for every +sparse layer, and by the top of a tall print it can sit far below the model. The +nozzle has to reach down to it at each purge. + +`compute_compacted_wipe_tower_z` derives that z once, from the generated results, +so the emitter and the validator cannot disagree. Emission descends to it, but +only once the nozzle is parked over the tower: descending while still over the +model would drive the nozzle into the print, so a descent that would do that is +deferred until after the travel to the tower. Extrusions emitted without an +explicit z — the nozzle-change wipe in particular — are pulled down to the +compacted z for the same reason. + +Reaching down is only safe if nothing tall stands near the tower. `Print.hpp` +carries the clearance rule: a keep-out zone grown from the tower's footprint by +the spiral z-hop envelope, and a per-object limit on how high an object may rise +near it, tiered by the nozzle cone, the head body, the rod and the lid. The same +rule serves the precise check on real extrusions, the pre-slice estimate that +feeds the plater, and the outlines the plater draws while an object is dragged, +so that the ring the user sees touches the object's outline exactly when the +check trips. + +## Merging sparse layers + +With `wipe_tower_sparse_layers_combination`, no layer is dropped and nothing is +compacted: the tower keeps following the object, and the nozzle never descends. +Instead a run of consecutive sparse layers prints once, on the run's last layer, +at the accumulated height of everything it covers — the same way infill +combination merges sparse infill. The layers below it in the run print nothing. + +`combine_sparse_wipe_tower_plan` runs before the tower's depths are planned, +because the heights it rewrites feed the extrusion flow of every later pass. It +raises `height` in place on the layer that prints a run and sets `combined_away` +on the rest; generation then proceeds unchanged, and the flag is copied onto the +results so the emitter can drop them. + +Four constraints shape the rule: + +- **Whole layers only.** A tower layer is entered at the object's z, so a merged + layer has to end on an object layer boundary. The merged height is therefore a + sum of whole layer heights, never a clamped value. +- **The nozzle's maximum layer height.** A run stops growing as soon as one more + layer would pass `max_layer_height` for the nozzle printing it — three quarters + of the nozzle diameter when that is left at 0, as elsewhere in slicing. The cap + is read through the filament-to-nozzle map, since `max_layer_height` is per + nozzle while the tower indexes filaments. This is what makes the setting inert + at common layer heights: two 0.2 mm layers are 0.4 mm and do not fit under a + 0.3 mm maximum, so nothing merges until the layer height is 0.15 mm or below, + or the maximum is raised. +- **A filament change purges at its own z.** A layer with a real change can + neither be merged away nor absorb the run below it, so a run always ends on its + own last sparse layer and the change above it is untouched. +- **The first layer stays on the bed.** It carries the brim and is never merged. + +A run holds one filament throughout — that is what makes it sparse — so the cap +is uniform across it, and the tower reserves depth only for the purges above a +layer, so a run has one footprint and the merged layer covers exactly the area +the layers it replaces would have. + +## Emission and accounting + +`WipeTowerIntegration` drops a layer whose results are marked, for both settings, +through the same `ignore_sparse` path in `tool_change` and +`is_empty_wipe_tower_gcode`. A dropped layer emits no travel to the tower and no +extrusion. + +Filament used is accumulated by the generators while they write, so a layer that +will be dropped must not be charged. Type 1 asks `layer_is_printed` at each of +its accumulation points; Type 2 guards the equivalent block in `finish_layer`, +which also stops a merged-away layer from adding height of its own — the layer +that prints the run carries all of it. + +A merged layer is the only case where the tower's layer height differs from the +object layer it sits on, and therefore the only case where the height the +exporter already emitted for that layer is wrong for the tower. Both generators +do declare a height, but each hardcodes a tag dialect — the block tower forces +the BBL tag, the other writes the compatible one — while the G-code processor +reads only the tag its printer uses. On a non-BBL printer with a Type 1 tower the +declaration is dropped, and the merged layer is drawn and costed as a thin one. +`WipeTowerIntegration::tower_height_tag` therefore declares it at export time, +where the printer is known, and only when the tower's own G-code does not already +carry the tag that will be read. The object's height returns on the next object +path, because emission forces the processor role to the tower on any layer that +carries one. + +## Constraints + +A layer that prints nothing prints nothing at all, including any interface work +the tower planner scheduled there. The Type 1 block planner marks a layer as a +contact layer when a filament category stops or starts being used relative to the +layer below, and a sparse layer immediately above a change qualifies. Merging a +run, like dropping its layers, replaces that interface with the run's single +layer. Both settings are off by default for this among other reasons. + +Neither setting changes what the tower is for. A plate that needs a tower on +every layer — smooth timelapse, clumping detection — gets one, and the settings +read as off rather than compacting or merging in one place and not another. + +## Implementation and verification + +- [WipeTower.hpp](../../src/libslic3r/GCode/WipeTower.hpp) declares the shared + rules and the plan-merging template; + [WipeTower.cpp](../../src/libslic3r/GCode/WipeTower.cpp) implements them and + the Type 1 tower, [WipeTower2.cpp](../../src/libslic3r/GCode/WipeTower2.cpp) + the Type 2 tower. +- [ToolOrdering.cpp](../../src/libslic3r/GCode/ToolOrdering.cpp) decides which + layers carry a tower at all, and + [Print.cpp](../../src/libslic3r/Print.cpp) plans it and runs the clearance + check whose rule lives in [Print.hpp](../../src/libslic3r/Print.hpp). +- [GCode.cpp](../../src/libslic3r/GCode.cpp) emits the tower, drops the layers + that print nothing, and declares a merged layer's height; + [PrintConfig.cpp](../../src/libslic3r/PrintConfig.cpp) defines the settings and + [ConfigManipulation.cpp](../../src/slic3r/GUI/ConfigManipulation.cpp) their + mutual exclusion. +- [GLCanvas3D.cpp](../../src/slic3r/GUI/GLCanvas3D.cpp) and + [PartPlate.cpp](../../src/slic3r/GUI/PartPlate.cpp) draw the compacted tower's + keep-out outlines live while the user drags. +- [Rule tests](../../tests/libslic3r/test_wipe_tower.cpp) cover the gating of + both settings, the per-layer predicates, the compacted z, the merge rule's run + flushing, height conservation, the nozzle cap and the first-layer exemption, + and the clearance geometry the plater draws. +- [Slicing tests](../../tests/fff_print/test_wipe_tower.cpp) slice a real print + and check that a run folds, that the tower still covers the object exactly + once, that a run too thin for the cap is left alone, and that a merged layer + declares its height in the tag the printer's processor reads. diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index 677f151fa9..fa09e82104 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: PACKAGE VERSION\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n" "Last-Translator: FULL NAME \n" "Language-Team: LANGUAGE \n" @@ -6161,9 +6161,6 @@ msgstr "" msgid "Preferences" msgstr "" -msgid "Open speed dial" -msgstr "" - msgctxt "Menu" msgid "Edit" msgstr "" @@ -6171,6 +6168,9 @@ msgstr "" msgid "View" msgstr "" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "" diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po index 27a9d805d7..dbd0272542 100644 --- a/localization/i18n/ca/OrcaSlicer_ca.po +++ b/localization/i18n/ca/OrcaSlicer_ca.po @@ -8,7 +8,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2025-03-15 10:55+0100\n" "Last-Translator: \n" "Language-Team: \n" @@ -6637,9 +6637,6 @@ msgstr "Mostrar el contorn al voltant de l'objecte seleccionat a l'escena 3D" msgid "Preferences" msgstr "Preferències" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6648,6 +6645,9 @@ msgstr "Edita" msgid "View" msgstr "Vista" +msgid "Open Speed Dial" +msgstr "" + # AI Translated msgid "Preset Bundle" msgstr "Paquet de perfils" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index c676d09a9a..41eeda79fd 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: Jakub Hencl\n" "Language-Team: \n" @@ -6602,9 +6602,6 @@ msgstr "Zobrazit obrys kolem vybraného objektu ve 3D scéně." msgid "Preferences" msgstr "Předvolby" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6613,6 +6610,9 @@ msgstr "Upravit" msgid "View" msgstr "Zobrazit" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Balík předvoleb" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index 7fefd18081..62fa086efa 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: Heiko Liebscher \n" "Language-Team: \n" @@ -6490,9 +6490,6 @@ msgstr "Kontur um das ausgewählte Objekt in der 3D-Szene anzeigen." msgid "Preferences" msgstr "Einstellungen" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6501,6 +6498,9 @@ msgstr "Bearbeiten" msgid "View" msgstr "Ansicht" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Vorlagen-Bundle" diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 3b915b2fcd..12ae826e67 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-06-17 15:44-0300\n" "Last-Translator: Alexandre Folle de Menezes\n" "Language-Team: \n" @@ -6157,9 +6157,6 @@ msgstr "" msgid "Preferences" msgstr "" -msgid "Open speed dial" -msgstr "" - msgctxt "Menu" msgid "Edit" msgstr "" @@ -6167,6 +6164,9 @@ msgstr "" msgid "View" msgstr "" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index 0b337641b8..4c2a634e3c 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: Ian A. Bassi <>\n" "Language-Team: \n" @@ -6346,9 +6346,6 @@ msgstr "Mostrar el contorno alrededor del objeto seleccionado en la escena 3D." msgid "Preferences" msgstr "Preferencias" -msgid "Open speed dial" -msgstr "" - msgctxt "Menu" msgid "Edit" msgstr "Edición" @@ -6356,6 +6353,9 @@ msgstr "Edición" msgid "View" msgstr "Vista" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Paquete de perfiles" diff --git a/localization/i18n/eu/OrcaSlicer_eu.po b/localization/i18n/eu/OrcaSlicer_eu.po index 717e55078a..c5f7363361 100644 --- a/localization/i18n/eu/OrcaSlicer_eu.po +++ b/localization/i18n/eu/OrcaSlicer_eu.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-07-20 13:33+0200\n" "Last-Translator: Manu Goiogana \n" "Language-Team: \n" @@ -6392,9 +6392,6 @@ msgstr "Erakutsi hautatutako objektuaren inguruko ingerada 3D eszenan." msgid "Preferences" msgstr "Hobespenak" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6403,6 +6400,9 @@ msgstr "Editatu" msgid "View" msgstr "Bista" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Aurrezarpen-paketea" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index f9f5f38865..51e021d073 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: Guislain Cyril, Thomas Lété\n" @@ -6439,9 +6439,6 @@ msgstr "Afficher le tracé contour de l’objet sélectionné dans la scène 3D. msgid "Preferences" msgstr "Préférences" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6450,6 +6447,9 @@ msgstr "Édition" msgid "View" msgstr "Affichage" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Paquet de préréglages" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index 4299ad09e8..4e1f233351 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "Language: hu\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -6541,9 +6541,6 @@ msgstr "Körvonal megjelenítése a kijelölt objektum körül a 3D nézetben." msgid "Preferences" msgstr "Beállítások" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6552,6 +6549,9 @@ msgstr "Szerkesztés" msgid "View" msgstr "Nézet" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Beállításcsomag" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index c8dd94c407..f17bfc5ba3 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -6543,9 +6543,6 @@ msgstr "Mostra il contorno attorno all'oggetto selezionato nella scena 3D." msgid "Preferences" msgstr "Preferenze" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6554,6 +6551,9 @@ msgstr "Modifica" msgid "View" msgstr "Vista" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Pacchetto profili" diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index 78a5d55307..3601d3add0 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -6553,9 +6553,6 @@ msgstr "3Dシーンで選択したオブジェクトの周りにアウトライ msgid "Preferences" msgstr "設定" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6564,6 +6561,9 @@ msgstr "編集" msgid "View" msgstr "表示" +msgid "Open Speed Dial" +msgstr "" + # AI Translated msgid "Preset Bundle" msgstr "プリセットバンドル" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index a6cc7df84a..e05554dab8 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2025-06-02 17:12+0900\n" "Last-Translator: crwusiz \n" "Language-Team: \n" @@ -6566,9 +6566,6 @@ msgstr "3D 장면에서 선택한 객체 주변에 윤곽선 표시" msgid "Preferences" msgstr "기본 설정" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6577,6 +6574,9 @@ msgstr "편집" msgid "View" msgstr "시점" +msgid "Open Speed Dial" +msgstr "" + # AI Translated msgid "Preset Bundle" msgstr "사전 설정 번들" diff --git a/localization/i18n/list.txt b/localization/i18n/list.txt index ef049fa48e..296829814a 100644 --- a/localization/i18n/list.txt +++ b/localization/i18n/list.txt @@ -213,6 +213,7 @@ src/slic3r/Utils/Process.cpp src/libslic3r/GCode.cpp src/libslic3r/GCodeWriter.cpp src/libslic3r/GCode/ToolOrdering.cpp +src/libslic3r/GCode/SeamPlacer.cpp src/libslic3r/ExtrusionEntity.cpp src/libslic3r/Flow.cpp src/libslic3r/Format/AMF.cpp diff --git a/localization/i18n/lt/OrcaSlicer_lt.po b/localization/i18n/lt/OrcaSlicer_lt.po index 49deda164c..1765ad1cc1 100644 --- a/localization/i18n/lt/OrcaSlicer_lt.po +++ b/localization/i18n/lt/OrcaSlicer_lt.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: \n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-07-02 14:13+0300\n" "Last-Translator: Gintaras Kučinskas \n" "Language-Team: \n" @@ -6528,9 +6528,6 @@ msgstr "Rodyti kontūrą aplink pasirinktą objektą 3D scenoje." msgid "Preferences" msgstr "Parinktys" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6539,6 +6536,9 @@ msgstr "Redaguoti" msgid "View" msgstr "Vaizdas" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Profilių rinkinys" diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index 2800bcda36..82486003ef 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: \n" "Language-Team: \n" @@ -7122,9 +7122,6 @@ msgstr "Toon een omtrek rond het geselecteerde object in de 3D-scène." msgid "Preferences" msgstr "Voorkeuren" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -7133,6 +7130,9 @@ msgstr "Bewerken" msgid "View" msgstr "Weergave" +msgid "Open Speed Dial" +msgstr "" + # AI Translated msgid "Preset Bundle" msgstr "Voorinstellingenbundel" diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po index c00b9df1c3..f5097f1ef5 100644 --- a/localization/i18n/pl/OrcaSlicer_pl.po +++ b/localization/i18n/pl/OrcaSlicer_pl.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer 2.3.0-rc\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: \n" "Last-Translator: Krzysztof Morga <>\n" "Language-Team: \n" @@ -6689,9 +6689,6 @@ msgstr "Przełącza wyświetlanie konturu wokół zaznaczonego obiektu w scenie msgid "Preferences" msgstr "Preferencje" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6700,6 +6697,9 @@ msgstr "Edycja" msgid "View" msgstr "Widok" +msgid "Open Speed Dial" +msgstr "" + # AI Translated msgid "Preset Bundle" msgstr "Pakiet profili" diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po index 3deb6bc7d0..67758b8b9d 100644 --- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po +++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-07-26 11:14-0300\n" "Last-Translator: Alexandre Folle de Menezes\n" "Language-Team: Portuguese, Brazilian\n" @@ -6363,9 +6363,6 @@ msgstr "Mostrar contorno ao redor do objeto selecionado na cena 3D." msgid "Preferences" msgstr "Preferências" -msgid "Open speed dial" -msgstr "" - msgctxt "Menu" msgid "Edit" msgstr "Editar" @@ -6373,6 +6370,9 @@ msgstr "Editar" msgid "View" msgstr "Visualizar" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Pacote de Predefinições" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index 4abcbda540..043aa5b476 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: OrcaSlicer V2.5.0\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-02-25 13:38+0300\n" "Last-Translator: Felix14_v2\n" "Language-Team: Felix14_v2 (ДС/ТГ: @felix14_v2, почта: aleks111001@list.ru), Andylg \n" @@ -6597,9 +6597,6 @@ msgstr "Отображение контура вокруг выбранных м msgid "Preferences" msgstr "Настройки" -msgid "Open speed dial" -msgstr "" - msgctxt "Menu" msgid "Edit" msgstr "Правка" @@ -6607,6 +6604,9 @@ msgstr "Правка" msgid "View" msgstr "Вид" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Пакет профилей" @@ -27357,3 +27357,22 @@ msgstr "" #~ msgid "Right click to reset value to system default." #~ msgstr "Правая кнопка мыши - сброс значения до системного по умолчанию." + +# AI Translated +msgid "Precise Seam" +msgstr "Точный шов" + +msgid "multiple intersections with a perimeter detected" +msgstr "обнаружены множественные пересечения с периметром" + +msgid "modifier fully crosses the printable perimeter" +msgstr "модификатор пересекает печатаемый периметр насквозь" + +msgid "modifier shape is not solid (has holes inside) and was ignored" +msgstr "форма модификатора не сплошная (имеет отверстия) и была проигнорирована" + +msgid "perimeter is fully contained inside modifier and was ignored" +msgstr "периметр полностью содержится внутри модификатора и был проигнорирован" + +msgid "Seam placement may differ from expected." +msgstr "Размещение шва может отличаться от ожидаемого." diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index 3ac55320d9..e05a90846b 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "Language: sv\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=UTF-8\n" @@ -7205,9 +7205,6 @@ msgstr "Visa en kontur runt det markerade objektet i 3D-scenen." msgid "Preferences" msgstr "Inställningar" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -7216,6 +7213,9 @@ msgstr "Redigera" msgid "View" msgstr "Vy" +msgid "Open Speed Dial" +msgstr "" + # AI Translated msgid "Preset Bundle" msgstr "Förinställningspaket" diff --git a/localization/i18n/th/OrcaSlicer_th.po b/localization/i18n/th/OrcaSlicer_th.po index d946726cba..e300799cbe 100644 --- a/localization/i18n/th/OrcaSlicer_th.po +++ b/localization/i18n/th/OrcaSlicer_th.po @@ -7,7 +7,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-06-19 13:40+0700\n" "Last-Translator: Icezaza\n" "Language-Team: Thai\n" @@ -6520,9 +6520,6 @@ msgstr "แสดงเค้าร่างรอบๆ วัตถุที msgid "Preferences" msgstr "การตั้งค่า" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6531,6 +6528,9 @@ msgstr "แก้ไข" msgid "View" msgstr "มุมมอง" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "ชุดที่ตั้งไว้ล่วงหน้า" diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index 34bee95de3..1f56d37744 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-08-21 23:18+0300\n" "Last-Translator: GlauTech\n" "Language-Team: \n" @@ -6588,9 +6588,6 @@ msgstr "3D sahnede seçilen nesnenin etrafındaki ana hatları göster." msgid "Preferences" msgstr "Tercihler" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6599,6 +6596,9 @@ msgstr "Düzen" msgid "View" msgstr "Görünüm" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Ön ayar paketi" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index 20de6f7523..d173e6fa5c 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: orcaslicerua\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-07-17 16:25+0300\n" "Last-Translator: Andrij Mizyk \n" "Language-Team: Ukrainian\n" @@ -6557,9 +6557,6 @@ msgstr "Показувати контур навколо виділеного о msgid "Preferences" msgstr "Налаштування" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6568,6 +6565,9 @@ msgstr "Редагування" msgid "View" msgstr "Вигляд" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "Набір пресетів" diff --git a/localization/i18n/vi/OrcaSlicer_vi.po b/localization/i18n/vi/OrcaSlicer_vi.po index 6b8451d646..8c6349c923 100644 --- a/localization/i18n/vi/OrcaSlicer_vi.po +++ b/localization/i18n/vi/OrcaSlicer_vi.po @@ -3,7 +3,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2025-10-02 17:43+0700\n" "Last-Translator: \n" "Language-Team: hainguyen.ts13@gmail.com\n" @@ -6907,9 +6907,6 @@ msgstr "Hiện đường viền xung quanh vật thể đã chọn trong cảnh msgid "Preferences" msgstr "Tùy chọn" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6918,6 +6915,9 @@ msgstr "Chỉnh sửa" msgid "View" msgstr "Xem" +msgid "Open Speed Dial" +msgstr "" + # AI Translated msgid "Preset Bundle" msgstr "Gói cài đặt sẵn" diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index b61846f434..a86678a8c2 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -6,7 +6,7 @@ msgid "" msgstr "" "Project-Id-Version: Slic3rPE\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2026-06-11 12:37-0300\n" "Last-Translator: Handle \n" "Language-Team: \n" @@ -6375,9 +6375,6 @@ msgstr "在3D场景中显示选中对象的轮廓" msgid "Preferences" msgstr "偏好设置" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6386,6 +6383,9 @@ msgstr "编辑" msgid "View" msgstr "视图" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "预设包" diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index 1cf114adc7..734d547ac9 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -9,7 +9,7 @@ msgid "" msgstr "" "Project-Id-Version: Orca Slicer\n" "Report-Msgid-Bugs-To: \n" -"POT-Creation-Date: 2026-09-22 12:39+0800\n" +"POT-Creation-Date: 2026-09-22 17:02+0800\n" "PO-Revision-Date: 2025-11-28 13:48-0600\n" "Last-Translator: tntchn <15895303+tntchn@users.noreply.github.com>\n" "Language-Team: \n" @@ -6505,9 +6505,6 @@ msgstr "在 3D 場景中顯示選定物件的輪廓" msgid "Preferences" msgstr "偏好設定" -msgid "Open speed dial" -msgstr "" - # AI Translated msgctxt "Menu" msgid "Edit" @@ -6516,6 +6513,9 @@ msgstr "編輯" msgid "View" msgstr "視角" +msgid "Open Speed Dial" +msgstr "" + msgid "Preset Bundle" msgstr "設定檔組" diff --git a/resources/images/menu_precise_seam_add.svg b/resources/images/menu_precise_seam_add.svg new file mode 100644 index 0000000000..f7efb2feb0 --- /dev/null +++ b/resources/images/menu_precise_seam_add.svg @@ -0,0 +1,19 @@ + + + + + + + + + + + + + + + + + + + diff --git a/resources/images/menu_precise_seam_blocked.svg b/resources/images/menu_precise_seam_blocked.svg new file mode 100644 index 0000000000..d84c2f1468 --- /dev/null +++ b/resources/images/menu_precise_seam_blocked.svg @@ -0,0 +1,28 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/images/menu_precise_seam_center.svg b/resources/images/menu_precise_seam_center.svg new file mode 100644 index 0000000000..f7efb2feb0 --- /dev/null +++ b/resources/images/menu_precise_seam_center.svg @@ -0,0 +1,19 @@ + + + + + + + + + + + + + + + + + + + diff --git a/resources/images/menu_precise_seam_enforced.svg b/resources/images/menu_precise_seam_enforced.svg new file mode 100644 index 0000000000..116cdb5bed --- /dev/null +++ b/resources/images/menu_precise_seam_enforced.svg @@ -0,0 +1,29 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/images/menu_precise_seam_left.svg b/resources/images/menu_precise_seam_left.svg new file mode 100644 index 0000000000..737d422373 --- /dev/null +++ b/resources/images/menu_precise_seam_left.svg @@ -0,0 +1,16 @@ + + + + + + + + + + + + + + + + diff --git a/resources/images/menu_precise_seam_neutral.svg b/resources/images/menu_precise_seam_neutral.svg new file mode 100644 index 0000000000..cf5af99506 --- /dev/null +++ b/resources/images/menu_precise_seam_neutral.svg @@ -0,0 +1,25 @@ + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/images/menu_precise_seam_right.svg b/resources/images/menu_precise_seam_right.svg new file mode 100644 index 0000000000..202895cac2 --- /dev/null +++ b/resources/images/menu_precise_seam_right.svg @@ -0,0 +1,16 @@ + + + + + + + + + + + + + + + + diff --git a/resources/images/menu_precise_seam_type.svg b/resources/images/menu_precise_seam_type.svg new file mode 100644 index 0000000000..42436d5441 --- /dev/null +++ b/resources/images/menu_precise_seam_type.svg @@ -0,0 +1,25 @@ + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/resources/profiles/Afinia.json b/resources/profiles/Afinia.json index e65ced0f68..8f3676c875 100644 --- a/resources/profiles/Afinia.json +++ b/resources/profiles/Afinia.json @@ -1,6 +1,6 @@ { "name": "Afinia", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "Afinia configurations", "machine_model_list": [ diff --git a/resources/profiles/Afinia/filament/Afinia ABS+@HS.json b/resources/profiles/Afinia/filament/Afinia ABS+@HS.json index 77fc0deee9..1a50c4cc98 100644 --- a/resources/profiles/Afinia/filament/Afinia ABS+@HS.json +++ b/resources/profiles/Afinia/filament/Afinia ABS+@HS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFLfywkp", - "setting_id": "wAJTMxtCY7EoavRi", "name": "Afinia ABS+@HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "wAJTMxtCY7EoavRi", + "filament_id": "OFLfywkp", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Afinia/filament/Afinia ABS@HS.json b/resources/profiles/Afinia/filament/Afinia ABS@HS.json index e905e002bd..8c561e0cca 100644 --- a/resources/profiles/Afinia/filament/Afinia ABS@HS.json +++ b/resources/profiles/Afinia/filament/Afinia ABS@HS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFV5wEMe", - "setting_id": "qCDnb2iBaz4hd4vX", "name": "Afinia ABS@HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "qCDnb2iBaz4hd4vX", + "filament_id": "OFV5wEMe", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Afinia/filament/Afinia PLA@HS.json b/resources/profiles/Afinia/filament/Afinia PLA@HS.json index cfd15a574b..d593ae69b4 100644 --- a/resources/profiles/Afinia/filament/Afinia PLA@HS.json +++ b/resources/profiles/Afinia/filament/Afinia PLA@HS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OF9HCdyQ", - "setting_id": "N3sCgjdjvp6FTtw9", "name": "Afinia PLA@HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "N3sCgjdjvp6FTtw9", + "filament_id": "OF9HCdyQ", + "instantiation": "true", "filament_cost": [ "24.99" ], diff --git a/resources/profiles/Afinia/filament/Afinia Value ABS@HS.json b/resources/profiles/Afinia/filament/Afinia Value ABS@HS.json index f98da8225d..7ef404c191 100644 --- a/resources/profiles/Afinia/filament/Afinia Value ABS@HS.json +++ b/resources/profiles/Afinia/filament/Afinia Value ABS@HS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFXi59OX", - "setting_id": "OxIiEYjbhEvSykaQ", "name": "Afinia Value ABS@HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "OxIiEYjbhEvSykaQ", + "filament_id": "OFXi59OX", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Afinia/filament/Afinia Value PLA@HS.json b/resources/profiles/Afinia/filament/Afinia Value PLA@HS.json index 1d9f669bd0..caf58c0956 100644 --- a/resources/profiles/Afinia/filament/Afinia Value PLA@HS.json +++ b/resources/profiles/Afinia/filament/Afinia Value PLA@HS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFgHh8ly", - "setting_id": "BASsUdyvElEVJ9AA", "name": "Afinia Value PLA@HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "BASsUdyvElEVJ9AA", + "filament_id": "OFgHh8ly", + "instantiation": "true", "filament_cost": [ "24.99" ], diff --git a/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.4 nozzle.json b/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.4 nozzle.json index 1c93b3f1cd..f0c6153ff2 100644 --- a/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.4 nozzle.json +++ b/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "iwkXfmEyz9RLZTvh", "name": "Afinia H+1(HS) 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_afinia_common", + "from": "system", + "setting_id": "iwkXfmEyz9RLZTvh", + "instantiation": "true", "printer_model": "Afinia H+1(HS)", "default_print_profile": "0.20mm Standard @Afinia H+1(HS)", "nozzle_diameter": [ diff --git a/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.6 nozzle.json b/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.6 nozzle.json index ecfca28454..0e5222b7ed 100644 --- a/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.6 nozzle.json +++ b/resources/profiles/Afinia/machine/Afinia H+1(HS) 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "vngsrxKvEIsmr8tQ", "name": "Afinia H+1(HS) 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Afinia H+1(HS) 0.4 nozzle", + "from": "system", + "setting_id": "vngsrxKvEIsmr8tQ", + "instantiation": "true", "printer_model": "Afinia H+1(HS)", "default_print_profile": "0.30mm Strength @Afinia H+1(HS) 0.6 nozzle", "nozzle_diameter": [ diff --git a/resources/profiles/Afinia/process/0.12mm Fine @Afinia H+1(HS).json b/resources/profiles/Afinia/process/0.12mm Fine @Afinia H+1(HS).json index 18e497cd01..954c198bfe 100644 --- a/resources/profiles/Afinia/process/0.12mm Fine @Afinia H+1(HS).json +++ b/resources/profiles/Afinia/process/0.12mm Fine @Afinia H+1(HS).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "FueWYijuvLNWzNmL", "name": "0.12mm Fine @Afinia H+1(HS)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_afinia_HS_common", + "from": "system", + "setting_id": "FueWYijuvLNWzNmL", + "instantiation": "true", "layer_height": "0.12", "bottom_shell_layers": "5", "elefant_foot_compensation": "0.15", diff --git a/resources/profiles/Afinia/process/0.16mm Optimal @Afinia H+1(HS).json b/resources/profiles/Afinia/process/0.16mm Optimal @Afinia H+1(HS).json index cebbfe2206..0c6cedfd05 100644 --- a/resources/profiles/Afinia/process/0.16mm Optimal @Afinia H+1(HS).json +++ b/resources/profiles/Afinia/process/0.16mm Optimal @Afinia H+1(HS).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "Ntf0ZMcETTPz7EY1", "name": "0.16mm Optimal @Afinia H+1(HS)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_afinia_HS_common", + "from": "system", + "setting_id": "Ntf0ZMcETTPz7EY1", + "instantiation": "true", "layer_height": "0.16", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "4", diff --git a/resources/profiles/Afinia/process/0.20mm Standard @Afinia H+1(HS).json b/resources/profiles/Afinia/process/0.20mm Standard @Afinia H+1(HS).json index e5449b7e16..6b9b9ff29b 100644 --- a/resources/profiles/Afinia/process/0.20mm Standard @Afinia H+1(HS).json +++ b/resources/profiles/Afinia/process/0.20mm Standard @Afinia H+1(HS).json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Lxid5Z2e0fvVDMMm", "name": "0.20mm Standard @Afinia H+1(HS)", - "from": "system", "inherits": "fdm_process_afinia_HS_common", + "from": "system", + "setting_id": "Lxid5Z2e0fvVDMMm", "instantiation": "true", "elefant_foot_compensation": "0.15", "top_shell_thickness": "1.0", diff --git a/resources/profiles/Afinia/process/0.24mm Draft @Afinia H+1(HS).json b/resources/profiles/Afinia/process/0.24mm Draft @Afinia H+1(HS).json index 0dad08c3b0..67af0c4dd0 100644 --- a/resources/profiles/Afinia/process/0.24mm Draft @Afinia H+1(HS).json +++ b/resources/profiles/Afinia/process/0.24mm Draft @Afinia H+1(HS).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "APeSqnRZh6I9OTFr", "name": "0.24mm Draft @Afinia H+1(HS)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_afinia_HS_common", + "from": "system", + "setting_id": "APeSqnRZh6I9OTFr", + "instantiation": "true", "layer_height": "0.24", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Afinia/process/0.28mm Extra Draft @Afinia H+1(HS).json b/resources/profiles/Afinia/process/0.28mm Extra Draft @Afinia H+1(HS).json index e8fb41dcb8..212b87411c 100644 --- a/resources/profiles/Afinia/process/0.28mm Extra Draft @Afinia H+1(HS).json +++ b/resources/profiles/Afinia/process/0.28mm Extra Draft @Afinia H+1(HS).json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "VZ3NOVzdVWqZ37Ge", "name": "0.28mm Extra Draft @Afinia H+1(HS)", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_afinia_HS_common", + "from": "system", + "setting_id": "VZ3NOVzdVWqZ37Ge", + "instantiation": "true", "layer_height": "0.28", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Anker.json b/resources/profiles/Anker.json index 945378db9c..6ff3e6d959 100644 --- a/resources/profiles/Anker.json +++ b/resources/profiles/Anker.json @@ -1,6 +1,6 @@ { "name": "Anker", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "Anker configurations", "machine_model_list": [ diff --git a/resources/profiles/Anker/filament/Generic ABS @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic ABS @Anker 0.2 nozzle.json index c3e47c80a3..b6ff6f9ca7 100644 --- a/resources/profiles/Anker/filament/Generic ABS @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic ABS @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Anker 0.2 nozzle", - "inherits": "Generic ABS @Anker base", "renamed_from": "Anker Generic ABS 0.2 nozzle", + "inherits": "Generic ABS @Anker base", "from": "system", "setting_id": "iOCt7x95XbWYMe5q", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic ABS @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic ABS @Anker 0.25 nozzle.json index 64fd62eb64..51f6de86ef 100644 --- a/resources/profiles/Anker/filament/Generic ABS @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic ABS @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Anker 0.25 nozzle", - "inherits": "Generic ABS @Anker base", "renamed_from": "Anker Generic ABS 0.25 nozzle", + "inherits": "Generic ABS @Anker base", "from": "system", "setting_id": "7Q2pr70SpSjK7v7Y", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic ABS @Anker.json b/resources/profiles/Anker/filament/Generic ABS @Anker.json index 978bc00e31..f33406b467 100644 --- a/resources/profiles/Anker/filament/Generic ABS @Anker.json +++ b/resources/profiles/Anker/filament/Generic ABS @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Anker", - "inherits": "Generic ABS @Anker base", "renamed_from": "Anker Generic ABS", + "inherits": "Generic ABS @Anker base", "from": "system", "setting_id": "x3IBYtgKBx6Mszzk", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic ASA @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic ASA @Anker 0.2 nozzle.json index 1a40e93730..cb5c4d1a25 100644 --- a/resources/profiles/Anker/filament/Generic ASA @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic ASA @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Anker 0.2 nozzle", - "inherits": "Generic ASA @Anker base", "renamed_from": "Anker Generic ASA 0.2 nozzle", + "inherits": "Generic ASA @Anker base", "from": "system", "setting_id": "lTR8QLbuttyVs5UW", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic ASA @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic ASA @Anker 0.25 nozzle.json index 0b85eef27c..9f44b88a13 100644 --- a/resources/profiles/Anker/filament/Generic ASA @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic ASA @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Anker 0.25 nozzle", - "inherits": "Generic ASA @Anker base", "renamed_from": "Anker Generic ASA 0.25 nozzle", + "inherits": "Generic ASA @Anker base", "from": "system", "setting_id": "FU4BiMydEyo7zxq5", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic ASA @Anker.json b/resources/profiles/Anker/filament/Generic ASA @Anker.json index 53b84223df..0d83d71947 100644 --- a/resources/profiles/Anker/filament/Generic ASA @Anker.json +++ b/resources/profiles/Anker/filament/Generic ASA @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Anker", - "inherits": "Generic ASA @Anker base", "renamed_from": "Anker Generic ASA", + "inherits": "Generic ASA @Anker base", "from": "system", "setting_id": "aDADuxiEKt2dVKOJ", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PA @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic PA @Anker 0.2 nozzle.json index 6460721e2f..203b000c31 100644 --- a/resources/profiles/Anker/filament/Generic PA @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PA @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Anker 0.2 nozzle", - "inherits": "Generic PA @Anker base", "renamed_from": "Anker Generic PA 0.2 nozzle", + "inherits": "Generic PA @Anker base", "from": "system", "setting_id": "tYAT7xnNFD6gY84A", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PA @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic PA @Anker 0.25 nozzle.json index ee2514e92c..96675fb685 100644 --- a/resources/profiles/Anker/filament/Generic PA @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PA @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Anker 0.25 nozzle", - "inherits": "Generic PA @Anker base", "renamed_from": "Anker Generic PA 0.25 nozzle", + "inherits": "Generic PA @Anker base", "from": "system", "setting_id": "Zlv65wLA94PbevRG", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PA @Anker.json b/resources/profiles/Anker/filament/Generic PA @Anker.json index e9acc2d7f6..eeb428ee33 100644 --- a/resources/profiles/Anker/filament/Generic PA @Anker.json +++ b/resources/profiles/Anker/filament/Generic PA @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Anker", - "inherits": "Generic PA @Anker base", "renamed_from": "Anker Generic PA", + "inherits": "Generic PA @Anker base", "from": "system", "setting_id": "sLWVtBxpAC53eUwo", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PA-CF @Anker.json b/resources/profiles/Anker/filament/Generic PA-CF @Anker.json index 6c3b2d1860..80e71d3c37 100644 --- a/resources/profiles/Anker/filament/Generic PA-CF @Anker.json +++ b/resources/profiles/Anker/filament/Generic PA-CF @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Anker", - "inherits": "Generic PA-CF @Anker base", "renamed_from": "Anker Generic PA-CF", + "inherits": "Generic PA-CF @Anker base", "from": "system", "setting_id": "K4LcpR0zBp5klSpb", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PC @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic PC @Anker 0.2 nozzle.json index 0126f9f893..024af4955c 100644 --- a/resources/profiles/Anker/filament/Generic PC @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PC @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Anker 0.2 nozzle", - "inherits": "Generic PC @Anker base", "renamed_from": "Anker Generic PC 0.2 nozzle", + "inherits": "Generic PC @Anker base", "from": "system", "setting_id": "2sSOgctcnVh9bGbQ", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PC @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic PC @Anker 0.25 nozzle.json index 50aca840aa..ab09365cac 100644 --- a/resources/profiles/Anker/filament/Generic PC @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PC @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Anker 0.25 nozzle", - "inherits": "Generic PC @Anker base", "renamed_from": "Anker Generic PC 0.25 nozzle", + "inherits": "Generic PC @Anker base", "from": "system", "setting_id": "h7IRuq5uekjNw4vg", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PC @Anker.json b/resources/profiles/Anker/filament/Generic PC @Anker.json index 5433518c5a..4c28fc9182 100644 --- a/resources/profiles/Anker/filament/Generic PC @Anker.json +++ b/resources/profiles/Anker/filament/Generic PC @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Anker", - "inherits": "Generic PC @Anker base", "renamed_from": "Anker Generic PC", + "inherits": "Generic PC @Anker base", "from": "system", "setting_id": "ffufXVvW95sunH1B", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PETG @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic PETG @Anker 0.2 nozzle.json index 2ff7eca4d1..ed66989ed4 100644 --- a/resources/profiles/Anker/filament/Generic PETG @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PETG @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Anker 0.2 nozzle", - "inherits": "Generic PETG @Anker base", "renamed_from": "Anker Generic PETG 0.2 nozzle", + "inherits": "Generic PETG @Anker base", "from": "system", "setting_id": "67ZHuiXPyCP6Tdtr", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PETG @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic PETG @Anker 0.25 nozzle.json index 9f9ae2da35..62deaea017 100644 --- a/resources/profiles/Anker/filament/Generic PETG @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PETG @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Anker 0.25 nozzle", - "inherits": "Generic PETG @Anker base", "renamed_from": "Anker Generic PETG 0.25 nozzle", + "inherits": "Generic PETG @Anker base", "from": "system", "setting_id": "aLuRALDt0Otbd2So", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PETG @Anker.json b/resources/profiles/Anker/filament/Generic PETG @Anker.json index cdb08f8671..f4a1a3b557 100644 --- a/resources/profiles/Anker/filament/Generic PETG @Anker.json +++ b/resources/profiles/Anker/filament/Generic PETG @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Anker", - "inherits": "Generic PETG @Anker base", "renamed_from": "Anker Generic PETG", + "inherits": "Generic PETG @Anker base", "from": "system", "setting_id": "hvV0rmnzRHJk9sMz", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PETG-CF @Anker.json b/resources/profiles/Anker/filament/Generic PETG-CF @Anker.json index e5a265c40f..ce47b93b01 100644 --- a/resources/profiles/Anker/filament/Generic PETG-CF @Anker.json +++ b/resources/profiles/Anker/filament/Generic PETG-CF @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Anker", - "inherits": "Generic PETG-CF @Anker base", "renamed_from": "Anker Generic PETG-CF", + "inherits": "Generic PETG-CF @Anker base", "from": "system", "setting_id": "vCAuQeQLoXUk28ph", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic PLA @Anker 0.2 nozzle.json index e8ffdb8c57..7f8c7cf5ad 100644 --- a/resources/profiles/Anker/filament/Generic PLA @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PLA @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Anker 0.2 nozzle", - "inherits": "Generic PLA @Anker base", "renamed_from": "Anker Generic PLA 0.2 nozzle", + "inherits": "Generic PLA @Anker base", "from": "system", "setting_id": "rCvmCzPgi4KA6nmI", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic PLA @Anker 0.25 nozzle.json index 5e4e3e0f0b..73fa17a0dc 100644 --- a/resources/profiles/Anker/filament/Generic PLA @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PLA @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Anker 0.25 nozzle", - "inherits": "Generic PLA @Anker base", "renamed_from": "Anker Generic PLA 0.25 nozzle", + "inherits": "Generic PLA @Anker base", "from": "system", "setting_id": "C0hNEbEueKrcYojS", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA @Anker.json b/resources/profiles/Anker/filament/Generic PLA @Anker.json index 5049571bcb..b077555137 100644 --- a/resources/profiles/Anker/filament/Generic PLA @Anker.json +++ b/resources/profiles/Anker/filament/Generic PLA @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Anker", - "inherits": "Generic PLA @Anker base", "renamed_from": "Anker Generic PLA", + "inherits": "Generic PLA @Anker base", "from": "system", "setting_id": "GfVhcxRmt6mHSemI", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.2 nozzle.json index e28ab1c79a..0f327899b8 100644 --- a/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Anker 0.2 nozzle", - "inherits": "Generic PLA Silk @Anker base", "renamed_from": "Anker Generic PLA Silk 0.2 nozzle", + "inherits": "Generic PLA Silk @Anker base", "from": "system", "setting_id": "NWGiPWYmLVktDMJt", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.25 nozzle.json index 2699cb1aea..2204fd0f6a 100644 --- a/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PLA Silk @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Anker 0.25 nozzle", - "inherits": "Generic PLA Silk @Anker base", "renamed_from": "Anker Generic PLA Silk 0.25 nozzle", + "inherits": "Generic PLA Silk @Anker base", "from": "system", "setting_id": "4thKBCnYgDtnAtF5", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA Silk @Anker.json b/resources/profiles/Anker/filament/Generic PLA Silk @Anker.json index 9629ba4f0b..109e113c55 100644 --- a/resources/profiles/Anker/filament/Generic PLA Silk @Anker.json +++ b/resources/profiles/Anker/filament/Generic PLA Silk @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Anker", - "inherits": "Generic PLA Silk @Anker base", "renamed_from": "Anker Generic PLA Silk", + "inherits": "Generic PLA Silk @Anker base", "from": "system", "setting_id": "URRIeNXIiIPjxbKL", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.2 nozzle.json b/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.2 nozzle.json index f32fb75a92..27fb60c005 100644 --- a/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.2 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Anker 0.2 nozzle", - "inherits": "Generic PLA+ @Anker base", "renamed_from": "Anker Generic PLA+ 0.2 nozzle", + "inherits": "Generic PLA+ @Anker base", "from": "system", "setting_id": "5m3xLxdReqLlE2Jp", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.25 nozzle.json b/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.25 nozzle.json index 291773e546..400d9d3752 100644 --- a/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.25 nozzle.json +++ b/resources/profiles/Anker/filament/Generic PLA+ @Anker 0.25 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Anker 0.25 nozzle", - "inherits": "Generic PLA+ @Anker base", "renamed_from": "Anker Generic PLA+ 0.25 nozzle", + "inherits": "Generic PLA+ @Anker base", "from": "system", "setting_id": "wwkWVDsg6SoeCS0F", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA+ @Anker.json b/resources/profiles/Anker/filament/Generic PLA+ @Anker.json index 1381c839da..41c212e697 100644 --- a/resources/profiles/Anker/filament/Generic PLA+ @Anker.json +++ b/resources/profiles/Anker/filament/Generic PLA+ @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Anker", - "inherits": "Generic PLA+ @Anker base", "renamed_from": "Anker Generic PLA+", + "inherits": "Generic PLA+ @Anker base", "from": "system", "setting_id": "MDb4CH02FxbgPNjS", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PLA-CF @Anker.json b/resources/profiles/Anker/filament/Generic PLA-CF @Anker.json index 7be034702f..6b281e029c 100644 --- a/resources/profiles/Anker/filament/Generic PLA-CF @Anker.json +++ b/resources/profiles/Anker/filament/Generic PLA-CF @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Anker", - "inherits": "Generic PLA-CF @Anker base", "renamed_from": "Anker Generic PLA-CF", + "inherits": "Generic PLA-CF @Anker base", "from": "system", "setting_id": "5AdjHUxRi8LCU4E9", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic PVA @Anker.json b/resources/profiles/Anker/filament/Generic PVA @Anker.json index 35a7dd456a..852bf35006 100644 --- a/resources/profiles/Anker/filament/Generic PVA @Anker.json +++ b/resources/profiles/Anker/filament/Generic PVA @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Anker", - "inherits": "Generic PVA @Anker base", "renamed_from": "Anker Generic PVA", + "inherits": "Generic PVA @Anker base", "from": "system", "setting_id": "HXERDaP3AgzWtmiu", "instantiation": "true", diff --git a/resources/profiles/Anker/filament/Generic TPU @Anker.json b/resources/profiles/Anker/filament/Generic TPU @Anker.json index 44204f1113..4b931e51bd 100644 --- a/resources/profiles/Anker/filament/Generic TPU @Anker.json +++ b/resources/profiles/Anker/filament/Generic TPU @Anker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Anker", - "inherits": "Generic TPU @Anker base", "renamed_from": "Anker Generic TPU", + "inherits": "Generic TPU @Anker base", "from": "system", "setting_id": "5YigkBBSP2RM1MbK", "instantiation": "true", diff --git a/resources/profiles/Anker/machine/fdm_marlin_common.json b/resources/profiles/Anker/machine/fdm_marlin_common.json index 4db7d1aef0..23dd8ea7c5 100644 --- a/resources/profiles/Anker/machine/fdm_marlin_common.json +++ b/resources/profiles/Anker/machine/fdm_marlin_common.json @@ -6,6 +6,7 @@ "instantiation": "false", "gcode_flavor": "marlin2", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n", + "file_start_gcode": ";TIME:{print_time_sec}s", "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}", "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18", "change_filament_gcode": "M600", diff --git a/resources/profiles/Anycubic.json b/resources/profiles/Anycubic.json index 85dce20a81..731d2b32eb 100644 --- a/resources/profiles/Anycubic.json +++ b/resources/profiles/Anycubic.json @@ -1,6 +1,6 @@ { "name": "Anycubic", - "version": "02.04.00.05", + "version": "02.04.00.08", "force_update": "0", "description": "Anycubic configurations", "machine_model_list": [ @@ -48,6 +48,10 @@ "name": "Anycubic Kobra 3 Max", "sub_path": "machine/Anycubic Kobra 3 Max.json" }, + { + "name": "Anycubic Kobra 3 V2", + "sub_path": "machine/Anycubic Kobra 3 V2.json" + }, { "name": "Anycubic Kobra Max", "sub_path": "machine/Anycubic Kobra Max.json" @@ -102,6 +106,10 @@ "name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", "sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json" @@ -118,6 +126,10 @@ "name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle", "sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json" }, + { + "name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle", + "sub_path": "process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json" + }, { "name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", "sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json" @@ -142,6 +154,10 @@ "name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle", "sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json" @@ -214,6 +230,10 @@ "name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle", "sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json" @@ -286,6 +306,10 @@ "name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle", "sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json" @@ -342,6 +366,10 @@ "name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle", "sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json" @@ -370,6 +398,10 @@ "name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle", "sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json" @@ -426,6 +458,10 @@ "name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle", "sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json" }, + { + "name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, { "name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle", "sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json" @@ -454,6 +490,10 @@ "name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, { "name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", "sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json" @@ -477,6 +517,34 @@ { "name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle", "sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json" + }, + { + "name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, + { + "name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json" } ], "filament_list": [ @@ -528,6 +596,10 @@ "name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle", "sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json" @@ -564,6 +636,10 @@ "name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle", "sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json" @@ -704,6 +780,10 @@ "name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle", "sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json" @@ -768,6 +848,22 @@ "name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle", + "sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json" + }, + { + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, { "name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle", "sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json" @@ -792,6 +888,22 @@ "name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle", "sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json" }, + { + "name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, + { + "name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle", "sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json" @@ -800,6 +912,10 @@ "name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle", "sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json" @@ -824,10 +940,26 @@ "name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, { "name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle", "sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json" @@ -844,10 +976,30 @@ "name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle", "sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json" }, + { + "name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, + { + "name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle", "sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json" }, + { + "name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle", "sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json" @@ -868,6 +1020,10 @@ "name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle", "sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json" }, + { + "name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle", "sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json" @@ -980,6 +1136,10 @@ "name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json" + }, { "name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle", "sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json" @@ -1016,6 +1176,22 @@ "name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle", "sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json" }, + { + "name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, + { + "name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json" + }, { "name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle", "sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json" @@ -1174,6 +1350,22 @@ "name": "Anycubic Kobra 3 Max 0.8 nozzle", "sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json" }, + { + "name": "Anycubic Kobra 3 V2 0.2 nozzle", + "sub_path": "machine/Anycubic Kobra 3 V2 0.2 nozzle.json" + }, + { + "name": "Anycubic Kobra 3 V2 0.4 nozzle", + "sub_path": "machine/Anycubic Kobra 3 V2 0.4 nozzle.json" + }, + { + "name": "Anycubic Kobra 3 V2 0.6 nozzle", + "sub_path": "machine/Anycubic Kobra 3 V2 0.6 nozzle.json" + }, + { + "name": "Anycubic Kobra 3 V2 0.8 nozzle", + "sub_path": "machine/Anycubic Kobra 3 V2 0.8 nozzle.json" + }, { "name": "Anycubic Kobra Max 0.4 nozzle", "sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json" diff --git a/resources/profiles/Anycubic/Anycubic Kobra 3 Max_buildplate_model.stl b/resources/profiles/Anycubic/Anycubic Kobra 3 Max_buildplate_model.stl index 3360c21b00..3fd5c5a4d8 100644 Binary files a/resources/profiles/Anycubic/Anycubic Kobra 3 Max_buildplate_model.stl and b/resources/profiles/Anycubic/Anycubic Kobra 3 Max_buildplate_model.stl differ diff --git a/resources/profiles/Anycubic/Anycubic Kobra 3 Max_cover.png b/resources/profiles/Anycubic/Anycubic Kobra 3 Max_cover.png index 91fc0d2b51..b2d2f30993 100644 Binary files a/resources/profiles/Anycubic/Anycubic Kobra 3 Max_cover.png and b/resources/profiles/Anycubic/Anycubic Kobra 3 Max_cover.png differ diff --git a/resources/profiles/Anycubic/Anycubic Kobra 3 V2_buildplate_model.stl b/resources/profiles/Anycubic/Anycubic Kobra 3 V2_buildplate_model.stl new file mode 100644 index 0000000000..12b2e0b5cc Binary files /dev/null and b/resources/profiles/Anycubic/Anycubic Kobra 3 V2_buildplate_model.stl differ diff --git a/resources/profiles/Anycubic/Anycubic Kobra 3 V2_buildplate_texture.svg b/resources/profiles/Anycubic/Anycubic Kobra 3 V2_buildplate_texture.svg new file mode 100644 index 0000000000..906abf59da --- /dev/null +++ b/resources/profiles/Anycubic/Anycubic Kobra 3 V2_buildplate_texture.svg @@ -0,0 +1,4 @@ + + + + diff --git a/resources/profiles/Anycubic/Anycubic Kobra 3 V2_cover.png b/resources/profiles/Anycubic/Anycubic Kobra 3 V2_cover.png new file mode 100644 index 0000000000..a1700488ca Binary files /dev/null and b/resources/profiles/Anycubic/Anycubic Kobra 3 V2_cover.png differ diff --git a/resources/profiles/Anycubic/Anycubic Kobra S1 Max_cover.png b/resources/profiles/Anycubic/Anycubic Kobra S1 Max_cover.png index 9a6079ae9b..3b391c89cc 100644 Binary files a/resources/profiles/Anycubic/Anycubic Kobra S1 Max_cover.png and b/resources/profiles/Anycubic/Anycubic Kobra S1 Max_cover.png differ diff --git a/resources/profiles/Anycubic/Anycubic Kobra X_cover.png b/resources/profiles/Anycubic/Anycubic Kobra X_cover.png index 112d7c4015..1adfef896a 100644 Binary files a/resources/profiles/Anycubic/Anycubic Kobra X_cover.png and b/resources/profiles/Anycubic/Anycubic Kobra X_cover.png differ diff --git a/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..0c138787fb --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "LXkKhWH9YcYPr3IT", + "filament_id": "OF223rZv", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "ABS" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "nozzle_temperature": [ + "250" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "5" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "1" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.05" + ], + "filament_deretraction_speed": [ + "80" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "80" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "100" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "15" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "16" + ], + "slow_down_min_speed": [ + "25" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..5d0fa038b1 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "cWBQa7XzDl3czIOs", + "filament_id": "OF0yFLkY", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "ASA" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "270" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "5" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "1" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.04" + ], + "filament_deretraction_speed": [ + "80" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "80" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "100" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "15" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "16" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..90af3ce5d6 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "suyxKj9qKLtpBhhU", + "filament_id": "OFo6n2pB", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "PETG" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "nozzle_temperature": [ + "230" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "5" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "15" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "80" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "80%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "80" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "6" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "25" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} diff --git a/resources/profiles/Sovol/filament/Sovol Zero PETG HS Nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json similarity index 55% rename from resources/profiles/Sovol/filament/Sovol Zero PETG HS Nozzle.json rename to resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json index ce68719ba9..a1986b5403 100644 --- a/resources/profiles/Sovol/filament/Sovol Zero PETG HS Nozzle.json +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -1,77 +1,69 @@ { "type": "filament", - "name": "Sovol Zero PETG HS Nozzle", - "inherits": "Generic PETG @System", + "name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle", "from": "system", - "setting_id": "AfxHmpdOkMDJa2fk", - "filament_id": "OFymnal9", + "setting_id": "0uOqeEk5YgyZH4Yy", + "filament_id": "OFo6n2pB", "instantiation": "true", + "filament_settings_id": [ + "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_type": [ + "PETG" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.6 nozzle" + ], "filament_flow_ratio": [ - "0.98" + "0.96" ], - "enable_pressure_advance": "1", - "pressure_advance": "0.048", "filament_max_volumetric_speed": [ - "15" - ], - "nozzle_temperature_initial_layer": [ - "265" + "8" ], "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_range_low": [ "230" ], - "nozzle_temperature_range_high": [ - "280" + "close_fan_the_first_x_layers": [ + "3" ], - "hot_plate_temp": [ - "85" - ], - "hot_plate_temp_initial_layer": [ - "85" + "fan_cooling_layer_time": [ + "30" ], "fan_min_speed": [ "10" ], - "fan_max_speed": [ - "40" - ], - "fan_cooling_layer_time": [ - "50" + "filament_density": [ + "1.23" ], "full_fan_speed_layer": [ - "3" + "0" ], - "slow_down_layer_time": [ - "10" + "hot_plate_temp": [ + "75" ], - "slow_down_min_speed": [ - "10" + "hot_plate_temp_initial_layer": [ + "75" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "210" ], "overhang_fan_speed": [ - "70" + "80" ], "overhang_fan_threshold": [ "10%" ], + "slow_down_layer_time": [ + "10" + ], "temperature_vitrification": [ - "60" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "filament_retraction_length": [ - "0.5" - ], - "filament_z_hop": [ - "0.4" - ], - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "50", - "complete_print_exhaust_fan_speed": "50", - "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "70" ] } diff --git a/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..3d0a4b9bd5 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle", + "from": "system", + "setting_id": "OOOjWFMFhP1fMhFf", + "filament_id": "OFo6n2pB", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PETG" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "220" + ], + "filament_retraction_length": [ + "0.8" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_initial_layer": [ + "220" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json new file mode 100644 index 0000000000..5b61836862 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "uJRZr6orTVm79FeE", + "filament_id": "OFmjN2bc", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle" + ], + "filament_type": [ + "PLA" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "nozzle_temperature": [ + "230" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.2 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..7410bbfeba --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "udLvkeYZ9Av7GkDz", + "filament_id": "OFmjN2bc", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "PLA" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "210" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..0d66e734c8 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "W69H1Vca3f74FfYj", + "filament_id": "OFmjN2bc", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "220" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..606dd8226e --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "TR27JCwXxHeVhVHN", + "filament_id": "OFmjN2bc", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "205" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "60" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..3dfec3c3bc --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "i0FTxiH68CKHiLLT", + "filament_id": "OF80Qbpq", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..65679ac989 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,258 @@ +{ + "type": "filament", + "name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "XHa1HSjh0RjAo0nz", + "filament_id": "OF80Qbpq", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_layer_time_BRASS": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..08e21b72e0 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,261 @@ +{ + "type": "filament", + "name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "iRVPFxNMEfkCDnMh", + "filament_id": "OF80Qbpq", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "fan_max_speed_BRASS": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "fan_min_speed_BRASS": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..66cf8a05c9 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "itTckVFabfsVbNBK", + "filament_id": "OF5PtjTp", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "PLA" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.2" + ], + "nozzle_temperature": [ + "210" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "40" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "60" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_z_hop_types": [ + "Auto Lift" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "9" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..2b60cad961 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "YLxoiuRDXBWLQYw4", + "filament_id": "OFjVOWfJ", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "PLA" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "nozzle_temperature": [ + "205" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..3986f89867 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "JwcCfY4XVCRJaDeS", + "filament_id": "OFCSyK66", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..785c0dfd4d --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Sjw7irNgwCZMfWS3", + "filament_id": "OFCSyK66", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..58d6fe6a48 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "HeQwxU4T2W1V0LM3", + "filament_id": "OFCSyK66", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..f776c75f34 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "H3PIqeTzjvtFQXYv", + "filament_id": "OFIE3vOf", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "PLA" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "nozzle_temperature": [ + "210" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..4dd266e868 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "4zmGMIi6jHJhU4c6", + "filament_id": "OF5F0S66", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..465eb87b45 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "wLkJ1CJgdWnT4NoJ", + "filament_id": "OF5F0S66", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..51f0cb0fc1 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "kkcDxmDe6F9fwhoJ", + "filament_id": "OF5F0S66", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "1" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.035" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..78bd6c1b49 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "QRl3zpmacQ8D8aNX", + "filament_id": "OFCp3Bgo", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "PLA" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "nozzle_temperature": [ + "210" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..2459b95221 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "qF5SGZKoINokZfx2", + "filament_id": "OFFwJWea", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "PLA" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "7.2" + ], + "nozzle_temperature": [ + "220" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..f338aff0d4 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle", + "from": "system", + "setting_id": "6aUrszW2Dj8CNYIp", + "filament_id": "OFFwJWea", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.6 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "7.2" + ], + "nozzle_temperature": [ + "220" + ], + "enable_pressure_advance": [ + "1" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.025" + ], + "slow_down_layer_time": [ + "10" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..5bc5216bc0 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle", + "from": "system", + "setting_id": "f8K19ebfxiXji84y", + "filament_id": "OFFwJWea", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.8 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "7.2" + ], + "nozzle_temperature": [ + "220" + ], + "enable_pressure_advance": [ + "1" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "80" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "pressure_advance": [ + "0.025" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..6899156d04 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,273 @@ +{ + "type": "filament", + "name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "NTs7c6NqAudTl9wk", + "filament_id": "OF7c9fln", + "instantiation": "true", + "filament_settings_id": [ + "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_vendor": [ + "Anycubic" + ], + "filament_type": [ + "PLA" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "dont_slow_down_outer_wall": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_cooling_layer_time_BRASS": [ + "100" + ], + "fan_max_speed": [ + "80" + ], + "fan_max_speed_BRASS": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "fan_min_speed_BRASS": [ + "70" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_BRASS": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_layer_time_BRASS": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..b2748a9149 --- /dev/null +++ b/resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,255 @@ +{ + "type": "filament", + "name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "oSWtTJpng3ERixPJ", + "filament_id": "OFMsDGbs", + "instantiation": "true", + "filament_vendor": [ + "Anycubic" + ], + "filament_settings_id": [ + "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "filament_type": [ + "TPU" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "3.2" + ], + "nozzle_temperature": [ + "210" + ], + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "activate_air_filtration": [ + "0" + ], + "activate_chamber_temp_control": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "bed_type": [ + "High Temp Plate" + ], + "chamber_temperature": [ + "0" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "compatible_printers_condition": "", + "compatible_prints": [], + "compatible_prints_condition": "", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "default_filament_colour": [ + "" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "enable_pressure_advance": [ + "0" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_final_speed": [ + "0" + ], + "filament_cooling_initial_speed": [ + "0" + ], + "filament_cooling_moves": [ + "0" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.23" + ], + "filament_deretraction_speed": [ + "25" + ], + "filament_diameter": [ + "1.75" + ], + "filament_end_gcode": [ + "; filament end gcode\n" + ], + "filament_is_support": [ + "0" + ], + "filament_loading_speed": [ + "0" + ], + "filament_loading_speed_start": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "0" + ], + "filament_multitool_ramming_volume": [ + "0" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_lift_enforce": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "35" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "0" + ], + "filament_unloading_speed_start": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "3" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "pressure_advance": [ + "0.05" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "support_material_interface_fan_speed": [ + "-1" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/Anycubic/filament/Generic ABS @Anycubic.json b/resources/profiles/Anycubic/filament/Generic ABS @Anycubic.json index cc7334fa34..99f5351291 100644 --- a/resources/profiles/Anycubic/filament/Generic ABS @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic ABS @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Anycubic", - "inherits": "fdm_filament_abs", "renamed_from": "Anycubic Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "jKvjWU6rcHvWblWC", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Anycubic/filament/Generic ASA @Anycubic.json b/resources/profiles/Anycubic/filament/Generic ASA @Anycubic.json index 282f590739..cc16da633f 100644 --- a/resources/profiles/Anycubic/filament/Generic ASA @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic ASA @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Anycubic", - "inherits": "fdm_filament_asa", "renamed_from": "Anycubic Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "o2Cr8cBtE4OKsTqm", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Anycubic/filament/Generic PA @Anycubic.json b/resources/profiles/Anycubic/filament/Generic PA @Anycubic.json index da5d2424e2..31be665d6d 100644 --- a/resources/profiles/Anycubic/filament/Generic PA @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic PA @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Anycubic", - "inherits": "fdm_filament_pa", "renamed_from": "Anycubic Generic PA", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "5MJsYpJIimshIDZm", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Anycubic/filament/Generic PA-CF @Anycubic.json b/resources/profiles/Anycubic/filament/Generic PA-CF @Anycubic.json index a360cfea1a..56243e67aa 100644 --- a/resources/profiles/Anycubic/filament/Generic PA-CF @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic PA-CF @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Anycubic", - "inherits": "fdm_filament_pa", "renamed_from": "Anycubic Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "j1uioy0lCnm4AKrm", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Anycubic/filament/Generic PC @Anycubic.json b/resources/profiles/Anycubic/filament/Generic PC @Anycubic.json index e2da18b155..818f20c41f 100644 --- a/resources/profiles/Anycubic/filament/Generic PC @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic PC @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Anycubic", - "inherits": "fdm_filament_pc", "renamed_from": "Anycubic Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "3jP8aWkWw2dT2fNM", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Anycubic/filament/Generic PETG @Anycubic.json b/resources/profiles/Anycubic/filament/Generic PETG @Anycubic.json index 697caad9d7..bace5dcb40 100644 --- a/resources/profiles/Anycubic/filament/Generic PETG @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic PETG @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Anycubic", - "inherits": "fdm_filament_pet", "renamed_from": "Anycubic Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "ddafY4oOvEc6L6Ej", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Anycubic/filament/Generic PLA @Anycubic.json b/resources/profiles/Anycubic/filament/Generic PLA @Anycubic.json index e7fe864b7e..f9752fb4a0 100644 --- a/resources/profiles/Anycubic/filament/Generic PLA @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic PLA @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Anycubic", - "inherits": "fdm_filament_pla", "renamed_from": "Anycubic Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "qoYfeBQCSt15O9ye", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Anycubic/filament/Generic PLA-CF @Anycubic.json b/resources/profiles/Anycubic/filament/Generic PLA-CF @Anycubic.json index 0f0bd4462a..ba3ed7d904 100644 --- a/resources/profiles/Anycubic/filament/Generic PLA-CF @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic PLA-CF @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Anycubic", - "inherits": "fdm_filament_pla", "renamed_from": "Anycubic Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "mLENUT39vBcQiLpm", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Anycubic/filament/Generic PVA @Anycubic.json b/resources/profiles/Anycubic/filament/Generic PVA @Anycubic.json index 7f6603b6db..5223c56dc8 100644 --- a/resources/profiles/Anycubic/filament/Generic PVA @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic PVA @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Anycubic", - "inherits": "fdm_filament_pva", "renamed_from": "Anycubic Generic PVA", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "ae5ljmDsW7uauLz8", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Anycubic/filament/Generic TPU @Anycubic.json b/resources/profiles/Anycubic/filament/Generic TPU @Anycubic.json index d52428e4e5..a14d8f302b 100644 --- a/resources/profiles/Anycubic/filament/Generic TPU @Anycubic.json +++ b/resources/profiles/Anycubic/filament/Generic TPU @Anycubic.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Anycubic", - "inherits": "fdm_filament_tpu", "renamed_from": "Anycubic Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "z0FSikhD8ZHv2UYt", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json index ed52a91b21..f20d9cc14e 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 Max 0.4 nozzle.json @@ -104,79 +104,64 @@ "machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X420 Y420 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors", "machine_load_filament_time": "75", "machine_max_acceleration_e": [ - "10000", "10000", "10000" ], "machine_max_acceleration_extruding": [ - "10000", "10000", "10000" ], "machine_max_acceleration_retracting": [ - "10000", "10000", "10000" ], "machine_max_acceleration_travel": [ - "10000", "10000", "10000" ], "machine_max_acceleration_x": [ - "10000", "10000", "10000" ], "machine_max_acceleration_y": [ - "10000", "10000", "10000" ], "machine_max_acceleration_z": [ - "3000", "3000", "3000" ], "machine_max_jerk_e": [ - "20", "20", "20" ], "machine_max_jerk_x": [ - "20", "20", "20" ], "machine_max_jerk_y": [ - "20", "20", "20" ], "machine_max_jerk_z": [ - "20", "20", "20" ], "machine_max_speed_e": [ "600", - "300", - "780" + "300" ], "machine_max_speed_x": [ "600", - "300", - "780" + "300" ], "machine_max_speed_y": [ "600", - "300", - "780" + "300" ], "machine_max_speed_z": [ "20", - "10", - "26" + "10" ], "machine_min_extruding_rate": [ "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json new file mode 100644 index 0000000000..09e690ea30 --- /dev/null +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json @@ -0,0 +1,240 @@ +{ + "type": "machine", + "name": "Anycubic Kobra 3 V2 0.2 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "gaQ37xRo6J467j1y", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra 3 V2 0.2 nozzle", + "printer_model": "Anycubic Kobra 3 V2", + "printer_variant": "0.2", + "nozzle_diameter": [ + "0.2" + ], + "default_print_profile": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "255x0", + "255x255", + "0x255" + ], + "printable_height": "260", + "thumbnails": [ + "230x110" + ], + "thumbnails_format": "PNG", + "thumbnails_internal": [ + "512x512/PNG/top" + ], + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "0", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "40" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "250", + "extruder_clearance_height_to_rod": "20", + "extruder_clearance_radius": "65", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n", + "machine_load_filament_time": "42", + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "20", + "20" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "20", + "20" + ], + "machine_max_speed_e": [ + "600", + "300" + ], + "machine_max_speed_x": [ + "600", + "300" + ], + "machine_max_speed_y": [ + "600", + "300" + ], + "machine_max_speed_z": [ + "15", + "10" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.08" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "i3", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0.3" + ], + "retract_lift_below": [ + "258" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "0.8" + ], + "retraction_minimum_travel": [ + "0" + ], + "retraction_speed": [ + "40" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "1" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..bacaca6168 --- /dev/null +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,236 @@ +{ + "type": "machine", + "name": "Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "l49qdfdrHYEO04bV", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra 3 V2 0.4 nozzle", + "printer_model": "Anycubic Kobra 3 V2", + "printer_variant": "0.4", + "nozzle_diameter": [ + "0.4" + ], + "default_print_profile": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "255x0", + "255x255", + "0x255" + ], + "printable_height": "260", + "thumbnails": "230x110/PNG", + "thumbnails_format": "PNG", + "thumbnails_internal": "512x512/PNG/top", + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "0", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "60" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "250", + "extruder_clearance_height_to_rod": "20", + "extruder_clearance_radius": "65", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors", + "machine_load_filament_time": "42", + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "20", + "20" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "20", + "20" + ], + "machine_max_speed_e": [ + "600", + "300" + ], + "machine_max_speed_x": [ + "600", + "300" + ], + "machine_max_speed_y": [ + "600", + "300" + ], + "machine_max_speed_z": [ + "15", + "10" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.28" + ], + "min_layer_height": [ + "0.08" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "i3", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "259" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "1" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "60" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "0", + "support_chamber_temp_control": "0", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Slope Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..d76b34af49 --- /dev/null +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,236 @@ +{ + "type": "machine", + "name": "Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "hQQgQT5HeCVGpBAL", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra 3 V2 0.6 nozzle", + "printer_model": "Anycubic Kobra 3 V2", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "default_print_profile": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "255x0", + "255x255", + "0x255" + ], + "printable_height": "260", + "thumbnails": "230x110/PNG", + "thumbnails_format": "PNG", + "thumbnails_internal": "512x512/PNG/top", + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "0", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "30" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "250", + "extruder_clearance_height_to_rod": "20", + "extruder_clearance_radius": "65", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n", + "machine_load_filament_time": "42", + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "20", + "20" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "20", + "20" + ], + "machine_max_speed_e": [ + "600", + "300" + ], + "machine_max_speed_x": [ + "600", + "300" + ], + "machine_max_speed_y": [ + "600", + "300" + ], + "machine_max_speed_z": [ + "15", + "10" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "i3", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0" + ], + "retract_lift_below": [ + "259" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "0.8" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "30" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..c28e9c620b --- /dev/null +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,240 @@ +{ + "type": "machine", + "name": "Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "LBhbohm7o4jW6OYw", + "instantiation": "true", + "printer_technology": "FFF", + "printer_settings_id": "Anycubic Kobra 3 V2 0.8 nozzle", + "printer_model": "Anycubic Kobra 3 V2", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "default_print_profile": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "default_filament_profile": [ + "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle" + ], + "disable_m73": "0", + "gcode_flavor": "klipper", + "printable_area": [ + "0x0", + "255x0", + "255x255", + "0x255" + ], + "printable_height": "260", + "thumbnails": [ + "230x110" + ], + "thumbnails_format": "PNG", + "thumbnails_internal": [ + "512x512/PNG/top" + ], + "thumbnails_internal_switch": "1", + "adaptive_bed_mesh_margin": "0", + "auxiliary_fan": "0", + "bbl_use_printhost": "0", + "bed_custom_model": "", + "bed_custom_texture": "", + "bed_exclude_area": [], + "bed_mesh_max": "0,0", + "bed_mesh_min": "0,0", + "bed_mesh_probe_distance": "0,0", + "before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "best_object_pos": "0.5,0.5", + "change_extrusion_role_gcode": "", + "change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)} F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END", + "cooling_tube_length": "0", + "cooling_tube_retraction": "0", + "deretraction_speed": [ + "0" + ], + "emit_machine_limits_to_gcode": "1", + "enable_filament_ramming": "0", + "enable_long_retraction_when_cut": "0", + "extra_loading_move": "0", + "extruder_clearance_height_to_lid": "250", + "extruder_clearance_height_to_rod": "20", + "extruder_clearance_radius": "65", + "extruder_colour": [ + "FF4D4F" + ], + "extruder_offset": [ + "0x0" + ], + "fan_kickstart": "0", + "fan_speedup_overhangs": "1", + "fan_speedup_time": "0", + "head_wrap_detect_zone": [], + "high_current_on_filament_swap": "0", + "host_type": "octoprint", + "layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm", + "long_retractions_when_cut": [ + "0" + ], + "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n", + "machine_load_filament_time": "42", + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "20", + "20" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "20", + "20" + ], + "machine_max_speed_e": [ + "600", + "300" + ], + "machine_max_speed_x": [ + "600", + "300" + ], + "machine_max_speed_y": [ + "600", + "300" + ], + "machine_max_speed_z": [ + "15", + "10" + ], + "machine_min_extruding_rate": [ + "0", + "0", + "0" + ], + "machine_min_travel_rate": [ + "0", + "0", + "0" + ], + "machine_pause_gcode": "M600", + "machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}", + "machine_tool_change_time": "0", + "machine_unload_filament_time": "0", + "manual_filament_change": "0", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "nozzle_height": "4", + "nozzle_hrc": "0", + "nozzle_type": "brass", + "nozzle_volume": "107", + "parking_pos_retraction": "0", + "pellet_modded_printer": "0", + "preferred_orientation": "0", + "printer_flush_multiplier": "1", + "printer_notes": "", + "printer_structure": "i3", + "printhost_authorization_type": "key", + "printhost_ssl_ignore_revoke": "0", + "printing_by_object_gcode": "", + "purge_in_prime_tower": "0", + "retract_before_wipe": [ + "0%" + ], + "retract_length_toolchange": [ + "0" + ], + "retract_lift_above": [ + "0.3" + ], + "retract_lift_below": [ + "259.6" + ], + "retract_lift_enforce": [ + "All Surfaces" + ], + "retract_on_top_layer": [ + "1" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_distances_when_cut": [ + "0" + ], + "retraction_length": [ + "1" + ], + "retraction_minimum_travel": [ + "1" + ], + "retraction_speed": [ + "40" + ], + "scan_first_layer": "0", + "single_extruder_multi_material": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "support_multi_bed_types": "1", + "template_custom_gcode": "", + "time_cost": "0", + "time_lapse_gcode": "", + "travel_slope": [ + "3" + ], + "upward_compatible_machine": [], + "use_firmware_retraction": "0", + "use_relative_e_distances": "1", + "wipe": [ + "1" + ], + "wipe_distance": [ + "2" + ], + "z_hop": [ + "0.4" + ], + "z_hop_types": [ + "Auto Lift" + ], + "z_offset": "0" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json new file mode 100644 index 0000000000..6ce4e4ccf5 --- /dev/null +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Anycubic Kobra 3 V2", + "machine_tech": "FFF", + "family": "Anycubic", + "model_id": "Anycubic Kobra 3 V2", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "bed_model": "Anycubic Kobra 3 V2_buildplate_model.stl", + "bed_texture": "Anycubic Kobra 3 V2_buildplate_texture.svg", + "hotend_model": "", + "default_materials": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle" +} diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json index 8786b75afa..e49fc80ced 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.25 nozzle.json @@ -73,79 +73,64 @@ "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ - "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ - "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ - "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ - "20000", "20000", "20000" ], "machine_max_acceleration_x": [ - "20000", "20000", "20000" ], "machine_max_acceleration_y": [ - "20000", "20000", "20000" ], "machine_max_acceleration_z": [ - "400", "400", "400" ], "machine_max_jerk_e": [ - "1", "1", "1" ], "machine_max_jerk_x": [ - "15", "15", "15" ], "machine_max_jerk_y": [ - "15", "15", "15" ], "machine_max_jerk_z": [ - "1", "1", "1" ], "machine_max_speed_e": [ "80", - "40", - "104" + "40" ], "machine_max_speed_x": [ "600", - "300", - "780" + "300" ], "machine_max_speed_y": [ "600", - "300", - "780" + "300" ], "machine_max_speed_z": [ "10", - "5", - "13" + "5" ], "machine_min_extruding_rate": [ "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json index f0ba840124..917ef24eb7 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.4 nozzle.json @@ -73,79 +73,64 @@ "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ - "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ - "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ - "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ - "20000", "20000", "20000" ], "machine_max_acceleration_x": [ - "20000", "20000", "20000" ], "machine_max_acceleration_y": [ - "20000", "20000", "20000" ], "machine_max_acceleration_z": [ - "400", "400", "400" ], "machine_max_jerk_e": [ - "1", "1", "1" ], "machine_max_jerk_x": [ - "15", "15", "15" ], "machine_max_jerk_y": [ - "15", "15", "15" ], "machine_max_jerk_z": [ - "1", "1", "1" ], "machine_max_speed_e": [ "80", - "40", - "104" + "40" ], "machine_max_speed_x": [ "600", - "300", - "780" + "300" ], "machine_max_speed_y": [ "600", - "300", - "780" + "300" ], "machine_max_speed_z": [ "10", - "5", - "13" + "5" ], "machine_min_extruding_rate": [ "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json index 604d488bdb..15069e5a78 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.6 nozzle.json @@ -73,79 +73,64 @@ "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ - "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ - "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ - "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ - "20000", "20000", "20000" ], "machine_max_acceleration_x": [ - "20000", "20000", "20000" ], "machine_max_acceleration_y": [ - "20000", "20000", "20000" ], "machine_max_acceleration_z": [ - "400", "400", "400" ], "machine_max_jerk_e": [ - "1", "1", "1" ], "machine_max_jerk_x": [ - "15", "15", "15" ], "machine_max_jerk_y": [ - "15", "15", "15" ], "machine_max_jerk_z": [ - "1", "1", "1" ], "machine_max_speed_e": [ "80", - "40", - "104" + "40" ], "machine_max_speed_x": [ "600", - "300", - "780" + "300" ], "machine_max_speed_y": [ "600", - "300", - "780" + "300" ], "machine_max_speed_z": [ "10", - "5", - "13" + "5" ], "machine_min_extruding_rate": [ "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json index d51a6fc560..711450dd79 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max 0.8 nozzle.json @@ -73,79 +73,64 @@ "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM141 S0 ; turn off box temperature\nM106 P1 S0 ; turn off fan\nM106 P2 S0\nM106 P3 S0\nM84; disable motors \n; disable stepper motors", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ - "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ - "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ - "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ - "20000", "20000", "20000" ], "machine_max_acceleration_x": [ - "20000", "20000", "20000" ], "machine_max_acceleration_y": [ - "20000", "20000", "20000" ], "machine_max_acceleration_z": [ - "400", "400", "400" ], "machine_max_jerk_e": [ - "1", "1", "1" ], "machine_max_jerk_x": [ - "15", "15", "15" ], "machine_max_jerk_y": [ - "15", "15", "15" ], "machine_max_jerk_z": [ - "1", "1", "1" ], "machine_max_speed_e": [ "80", - "40", - "104" + "40" ], "machine_max_speed_x": [ "600", - "300", - "780" + "300" ], "machine_max_speed_y": [ "600", - "300", - "780" + "300" ], "machine_max_speed_z": [ "10", - "5", - "13" + "5" ], "machine_min_extruding_rate": [ "0", diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json index 0f35afd33f..ec754a7324 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra S1 Max.json @@ -1,12 +1,12 @@ { - "type": "machine_model", - "machine_tech": "FFF", - "family": "Anycubic", - "name": "Anycubic Kobra S1 Max", - "model_id": "Anycubic Kobra S1 Max", - "nozzle_diameter": "0.4;0.25;0.6;0.8", - "bed_model": "Anycubic Kobra S1 Max_buildplate_model.stl", - "bed_texture": "Anycubic Kobra S1 Max_buildplate_texture.svg", - "hotend_model": "", - "default_materials": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle" + "type": "machine_model", + "name": "Anycubic Kobra S1 Max", + "machine_tech": "FFF", + "family": "Anycubic", + "model_id": "Anycubic Kobra S1 Max", + "nozzle_diameter": "0.4;0.25;0.6;0.8", + "bed_model": "Anycubic Kobra S1 Max_buildplate_model.stl", + "bed_texture": "Anycubic Kobra S1 Max_buildplate_texture.svg", + "hotend_model": "", + "default_materials": "Anycubic PLA @Anycubic Kobra S1 Max 0.4 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.25 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.6 nozzle;Anycubic PLA @Anycubic Kobra S1 Max 0.8 nozzle" } diff --git a/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json b/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json index 8e2952b123..3bbdb12fc6 100644 --- a/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json +++ b/resources/profiles/Anycubic/machine/Anycubic Kobra X 0.4 nozzle.json @@ -53,7 +53,7 @@ "before_layer_change_gcode": "", "best_object_pos": "0.5,0.5", "change_extrusion_role_gcode": "", - "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 17:46:45 3+n换料gcode，包括7=3+4，19=3+4×4\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n;;; SET_VELOCITY_LIMIT VELOCITY=350 ACCEL=10000\n;;; G1 E-2 F4800\n;;; G1 Z{toolchange_z+0.6} F1800\n;;; M106 S0\n;;; G1 X265 F21000\n;;; M400 P370\n;;; G1 X277.5 F600\n;;; G1 E-2 F300\n;;; M400 P361\n;;; G1 Z{toolchange_z+3} F1200\n;;; G1 X0 F21000\n;;; G1 X-17.5 F5250\n;;; M400 P1569\n\n{local minimal_extrude_ = 5.0}\n{if one_of(filament_type[current_extruder], \"TPU\", \"PVA\")}\n{local minimal_extrude_ = 8.0}\n{endif}\n;;; G1 E{minimal_extrude_} F300\n;;; G1 E-33 F600\n\n{ local curr_t = current_extruder; local next_t = next_extruder;}\n{ local tab_step_time_ = (0, 850, 1350, 850, 850, 0, 1350, 1350, 1350, 1350, 0, 850, 850, 1350, 850, 0)};\n{ if (0 <= curr_t && curr_t < 3) then local step_from_=curr_t else local step_from_=3 endif}; from {step_from_}\n{ if (0 <= next_t && next_t < 3) then local step_into_=next_t else local step_into_=3 endif}; from {step_into_}\n;;; M400 P{tab_step_time_[step_from_ * 4 + step_into_]}\n\n{ local magic_mask_with_box = flush_length_4}\n{ if magic_mask_with_box == -1392 }\n { local is_curr_in_box = size(ace_t_box_vector) > curr_t ? ace_t_box_vector[curr_t] >= 0 ? true : false : false}; is_curr_in_box = {is_curr_in_box}\n { local is_next_in_box = size(ace_t_box_vector) > next_t ? ace_t_box_vector[next_t] >= 0 ? true : false : false}; is_next_in_box = {is_next_in_box}\n\n; curr_t box={ace_t_box_vector[curr_t]}, slot={ace_t_slot_vector[curr_t]}; next_t box={ace_t_box_vector[next_t]}, slot={ace_t_slot_vector[next_t]}\n { if ace_t_box_vector[curr_t] < 0 && ace_t_box_vector[next_t] < 0}\n;;; M400 P0 ; 料架→料架\n { elsif ace_t_box_vector[curr_t] < 0 && ace_t_box_vector[next_t] >= 0 }\n;;; M400 P40409 ; 料架→盒子\n { elsif ace_t_box_vector[curr_t] >= 0 && ace_t_box_vector[next_t] < 0 }\n;;; M400 P51591 ; 盒子→料架\n { elsif ace_t_box_vector[curr_t] >= 0 && ace_t_box_vector[next_t] == ace_t_box_vector[curr_t] }\n { if 0 < ace_t_slot_vector[curr_t] && ace_t_slot_vector[curr_t] <= 4 && 0 < ace_t_slot_vector[next_t] && ace_t_slot_vector[next_t] <= 4}\n;;; M400 P2700 ; 四进四→料盒\n { else }\n;;; M400 P91279 ; 盒子→盒子\n { endif }\n { elsif ace_t_box_vector[curr_t] >= 0 && ace_t_box_vector[next_t] != ace_t_box_vector[curr_t] }\n;;; M400 P93746 ; 盒子→不同盒子\n { else }\n; 未知\n { endif }\n{ endif }\n\n\nT[next_extruder]\n\n;;; G1 E8 F300\n;;; M400 P3643\n;;; G1 E13 F1200\n;;; M400 P1000\n\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_-70+150) / 150))}\n{local extrude_length_=flush_length_ / loops_}\n{local EXTRUDE_SPEED_ = 5 * 60}\n{local UNWIND_SPEED_ = 20 *60}\n{local index_ = 0}\n\n{ if (loops_ > 0) }\n{ local loops_ = loops_ - 1}\n{ local index_ = index_ + 1}\n; {index_} + {loops_}\n;;; M106 S0\n;;; M400 P1000\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; M400 P{extrude_length_/0.03}\n;;; G1 E0.000001\n;;; M106 S255\n;;; M400 P2005\n;;; G1 E-2 F{UNWIND_SPEED_}\n;;; M400 P414\n{endif}\n{ if (loops_ > 0) }\n{ loops_ = loops_ - 1}\n{ index_ = index_ + 1}\n; {index_} + {loops_}\n;;; M106 S0\n;;; M400 P1000\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; M400 P{extrude_length_/0.03}\n;;; M106 S255\n;;; M400 P2005\n;;; G1 E-2 F{UNWIND_SPEED_}\n;;; M400 P414\n{endif}\n{ if (loops_ > 0) }\n{ loops_ = loops_ - 1}\n{ index_ = index_ + 1}\n; {index_} + {loops_}\n;;; M106 S0\n;;; M400 P1000\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; M400 P{extrude_length_/0.03}\n;;; M106 S255\n;;; M400 P2005\n;;; G1 E-2 F{UNWIND_SPEED_}\n;;; M400 P414\n{endif}\n\n; G1 X{x_after_toolchange} Y{y_after_toolchange} F12000\n; G1 Z{toolchange_z} F1200\n;;; G1 E2 F1800\n; SET_VELOCITY_LIMIT VELOCITY=450 ACCEL=10000\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END", + "change_filament_gcode": "; FLUSH_START\n;@2026-04-03 17:46:45 3+n换料gcode，包括7=3+4，19=3+4×4\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n;;; SET_VELOCITY_LIMIT VELOCITY=350 ACCEL=10000\n;;; G1 E-2 F4800\n;;; G1 Z{toolchange_z+0.6} F1800\n;;; M106 S0\n;;; G1 X265 F21000\n;;; M400 P370\n;;; G1 X277.5 F600\n;;; G1 E-2 F300\n;;; M400 P361\n;;; G1 Z{toolchange_z+3} F1200\n;;; G1 X0 F21000\n;;; G1 X-17.5 F5250\n;;; M400 P1569\n\n{local minimal_extrude_ = 5.0}\n{if one_of(filament_type[current_extruder], \"TPU\", \"PVA\")}\n{local minimal_extrude_ = 8.0}\n{endif}\n;;; G1 E{minimal_extrude_} F300\n;;; G1 E-33 F600\n\n{ local curr_t = current_extruder; local next_t = next_extruder;}\n{ local tab_step_time_ = (0, 850, 1350, 850, 850, 0, 1350, 1350, 1350, 1350, 0, 850, 850, 1350, 850, 0)};\n{ if (0 <= curr_t && curr_t < 3) then local step_from_=curr_t else local step_from_=3 endif}; from {step_from_}\n{ if (0 <= next_t && next_t < 3) then local step_into_=next_t else local step_into_=3 endif}; from {step_into_}\n;;; M400 P{tab_step_time_[step_from_ * 4 + step_into_]}\n\n\nT[next_extruder]\n\n;;; G1 E8 F300\n;;; M400 P3643\n;;; G1 E13 F1200\n;;; M400 P1000\n\n{local flush_length_= flush_length}\n{local loops_=max(1,int((flush_length_-70+150) / 150))}\n{local extrude_length_=flush_length_ / loops_}\n{local EXTRUDE_SPEED_ = 5 * 60}\n{local UNWIND_SPEED_ = 20 *60}\n{local index_ = 0}\n\n{ if (loops_ > 0) }\n{ local loops_ = loops_ - 1}\n{ local index_ = index_ + 1}\n; {index_} + {loops_}\n;;; M106 S0\n;;; M400 P1000\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; M400 P{extrude_length_/0.03}\n;;; G1 E0.000001\n;;; M106 S255\n;;; M400 P2005\n;;; G1 E-2 F{UNWIND_SPEED_}\n;;; M400 P414\n{endif}\n{ if (loops_ > 0) }\n{ loops_ = loops_ - 1}\n{ index_ = index_ + 1}\n; {index_} + {loops_}\n;;; M106 S0\n;;; M400 P1000\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; M400 P{extrude_length_/0.03}\n;;; M106 S255\n;;; M400 P2005\n;;; G1 E-2 F{UNWIND_SPEED_}\n;;; M400 P414\n{endif}\n{ if (loops_ > 0) }\n{ loops_ = loops_ - 1}\n{ index_ = index_ + 1}\n; {index_} + {loops_}\n;;; M106 S0\n;;; M400 P1000\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.18} F{EXTRUDE_SPEED_}\n;;; G1 E{extrude_length_*0.02} F{EXTRUDE_SPEED_}\n;;; M400 P{extrude_length_/0.03}\n;;; M106 S255\n;;; M400 P2005\n;;; G1 E-2 F{UNWIND_SPEED_}\n;;; M400 P414\n{endif}\n\n; G1 X{x_after_toolchange} Y{y_after_toolchange} F12000\n; G1 Z{toolchange_z} F1200\n;;; G1 E2 F1800\n; SET_VELOCITY_LIMIT VELOCITY=450 ACCEL=10000\n;;; M400 P0\n;_GP_INLINE_ESTIMATED_PRINTING_TIME_PLACEHOLDER\n; FLUSH_END", "cooling_tube_length": "0", "cooling_tube_retraction": "0", "deretraction_speed": [ @@ -85,48 +85,63 @@ "machine_end_gcode": "M400\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "6500", "6500" ], "machine_max_acceleration_extruding": [ + "6500", "6500" ], "machine_max_acceleration_retracting": [ + "6500", "6500" ], "machine_max_acceleration_travel": [ + "10000", "10000" ], "machine_max_acceleration_x": [ + "10000", "10000" ], "machine_max_acceleration_y": [ + "10000", "10000" ], "machine_max_acceleration_z": [ + "1000", "1000" ], "machine_max_jerk_e": [ + "1", "1" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "20", "20" ], "machine_max_speed_e": [ + "250", "250" ], "machine_max_speed_x": [ + "450", "450" ], "machine_max_speed_y": [ + "450", "450" ], "machine_max_speed_z": [ + "12", "12" ], "machine_min_extruding_rate": [ diff --git a/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..511a72b1ad --- /dev/null +++ b/resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "9yiDozcVDSxKkz4V", + "instantiation": "true", + "print_settings_id": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.08", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "7", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "5000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "1", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "45", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "45", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "350", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "200", + "ironing_angle": "-1", + "ironing_flow": "8%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "3", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "200", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "10000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "450", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.08", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_xy_distance": "60%", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "15", + "support_top_z_distance": "0.08", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "9", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json b/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json new file mode 100644 index 0000000000..7a92f74fc1 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "eSyZsnWMuOyokoLr", + "instantiation": "true", + "print_settings_id": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle", + "layer_height": "0.1", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.2 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "50%", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "outer_only", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "10", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.075", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "0", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "100", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "10", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "30", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.25", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.1", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "10", + "inner_wall_line_width": "0.22", + "inner_wall_speed": "150", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "100%", + "internal_solid_infill_line_width": "0.22", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "120", + "ironing_angle": "-1", + "ironing_flow": "15%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.22", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "10", + "outer_wall_line_width": "0.22", + "outer_wall_speed": "80", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "2", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "100%", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "20", + "seam_slope_start_height": "0", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "100%", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.22", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "150", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.1", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.5", + "support_interface_speed": "80", + "support_interface_top_layers": "2", + "support_line_width": "0.22", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "40", + "support_top_z_distance": "0.1", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "25%", + "top_shell_layers": "7", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.22", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "120", + "travel_acceleration": "15000", + "travel_jerk": "12", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "4", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..7e4f2c0a00 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,58 @@ +{ + "type": "process", + "name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "from": "system", + "setting_id": "HqXRokM0mAA691LV", + "instantiation": "true", + "print_settings_id": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.12", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "bottom_shell_thickness": "0", + "bridge_acceleration": "2000", + "bridge_speed": "30", + "brim_type": "auto_brim", + "default_acceleration": "5000", + "default_jerk": "9", + "gap_infill_speed": "180", + "initial_layer_infill_speed": "50", + "initial_layer_speed": "50", + "inner_wall_acceleration": "4000", + "inner_wall_jerk": "9", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_speed": "180", + "ironing_flow": "10%", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_speed": "60", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "prime_tower_width": "35", + "raft_first_layer_expansion": "5", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "small_perimeter_speed": "50%", + "sparse_infill_acceleration": "5000", + "sparse_infill_speed": "180", + "support_interface_top_layers": "2", + "support_threshold_angle": "20", + "top_bottom_infill_wall_overlap": "15%", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_speed": "150", + "travel_acceleration": "5000", + "travel_jerk": "9", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wipe_on_loops": "0", + "wipe_tower_extra_spacing": "120%" +} diff --git a/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..0cb9844f79 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "NCKx6glFcaEOhqZC", + "instantiation": "true", + "print_settings_id": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.12", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "5000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "350", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "45", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "45", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "300", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "200", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "130", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "10000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "430", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.12", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_top_layers": "3", + "support_line_width": "0.42", + "support_object_xy_distance": "60%", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "20", + "support_top_z_distance": "0.12", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "5", + "top_shell_thickness": "0.6", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "200", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..8927b82909 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,51 @@ +{ + "type": "process", + "name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "from": "system", + "setting_id": "mVDCX89vYKfBA57g", + "instantiation": "true", + "print_settings_id": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.16", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "bottom_shell_thickness": "0", + "bridge_acceleration": "2000", + "default_acceleration": "4000", + "default_jerk": "9", + "infill_anchor_max": "20", + "initial_layer_infill_speed": "50", + "initial_layer_speed": "50", + "inner_wall_acceleration": "4000", + "inner_wall_jerk": "9", + "internal_solid_infill_acceleration": "4000", + "internal_solid_infill_speed": "200", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_speed": "150", + "overhang_1_4_speed": "60", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "prime_tower_width": "30", + "raft_first_layer_expansion": "5", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "small_perimeter_speed": "50%", + "sparse_infill_acceleration": "4000", + "sparse_infill_speed": "200", + "support_line_width": "0.42", + "support_threshold_angle": "25", + "top_bottom_infill_wall_overlap": "15%", + "travel_acceleration": "4000", + "travel_jerk": "9", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wipe_on_loops": "0", + "wipe_tower_extra_spacing": "120%" +} diff --git a/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..d63e7aef13 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "ut3FZjM7h3doFjRg", + "instantiation": "true", + "print_settings_id": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.16", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "5000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "45", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "45", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "200", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "130", + "overhang_1_4_speed": "60", + "overhang_2_4_speed": "30", + "overhang_3_4_speed": "10", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "300", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.16", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_xy_distance": "60%", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "25", + "support_top_z_distance": "0.16", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "6", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..a20341393e --- /dev/null +++ b/resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,57 @@ +{ + "type": "process", + "name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "from": "system", + "setting_id": "V7T6yBxuQzWucCpA", + "instantiation": "true", + "print_settings_id": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.2", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "bottom_shell_thickness": "0", + "bridge_acceleration": "4000", + "bridge_speed": "50", + "brim_object_gap": "0.1", + "brim_width": "5", + "default_acceleration": "4000", + "default_jerk": "9", + "initial_layer_infill_speed": "50", + "initial_layer_speed": "50", + "inner_wall_acceleration": "4000", + "inner_wall_jerk": "9", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "4000", + "internal_solid_infill_speed": "250", + "ironing_flow": "10%", + "outer_wall_acceleration": "2000", + "outer_wall_jerk": "9", + "outer_wall_speed": "60", + "overhang_4_4_speed": "10", + "prime_tower_width": "30", + "raft_first_layer_expansion": "5", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "seam_slope_conditional": "1", + "seam_slope_inner_walls": "1", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "sparse_infill_acceleration": "4000", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "270", + "support_line_width": "0.42", + "support_threshold_angle": "30", + "top_bottom_infill_wall_overlap": "15%", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_speed": "200", + "travel_acceleration": "4000", + "travel_jerk": "9", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wipe_on_loops": "0", + "wipe_tower_extra_spacing": "120%" +} diff --git a/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..c3c4c21855 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "K5se4jnf2XHJNkEQ", + "instantiation": "true", + "print_settings_id": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.2", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "5000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "250", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "45", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "45", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "200", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "130", + "ironing_angle": "-1", + "ironing_flow": "15%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "130", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "300", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_top_layers": "2", + "support_line_width": "0.4", + "support_object_xy_distance": "60%", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "30", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "5", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "130", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..7bf100714b --- /dev/null +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "cg8f6Q9o8nRePSC9", + "instantiation": "true", + "print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.24", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "5000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "200", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "10", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "45", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "45", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "200", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.45", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "200", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "200", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_xy_distance": "60%", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "35", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "15%", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "180", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..5c93071727 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "from": "system", + "setting_id": "DhqKrBJZh4W22xna", + "instantiation": "true", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "layer_height": "0.24", + "brim_type": "auto_brim", + "default_acceleration": "6000", + "default_jerk": "9", + "elefant_foot_compensation": "0.1", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "outer_wall_jerk": "9", + "raft_first_layer_expansion": "5", + "sparse_infill_acceleration": "6000", + "support_threshold_angle": "30", + "top_bottom_infill_wall_overlap": "15%", + "travel_acceleration": "10000", + "travel_jerk": "9" +} diff --git a/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json new file mode 100644 index 0000000000..8d99d7720e --- /dev/null +++ b/resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "Qe8XQonRxfA8Jei1", + "instantiation": "true", + "print_settings_id": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle", + "layer_height": "0.28", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.4 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "2000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "auto_brim", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "10000", + "default_jerk": "9", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "200", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "20", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "45", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.5", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.2", + "initial_layer_speed": "45", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "inner_wall_line_width": "0.45", + "inner_wall_speed": "200", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.42", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "180", + "ironing_angle": "-1", + "ironing_flow": "10%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.42", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "15", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "9", + "outer_wall_line_width": "0.42", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "0%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "5", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "30", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "10", + "seam_slope_start_height": "10%", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "30%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "sparse_infill_speed": "200", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_top_layers": "2", + "support_line_width": "0.42", + "support_object_xy_distance": "60%", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "40", + "support_top_z_distance": "0.2", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "25%", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.42", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "180", + "travel_acceleration": "10000", + "travel_jerk": "9", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "120%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..b5873f5a6e --- /dev/null +++ b/resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "13ES5eks7VTR3G2E", + "instantiation": "true", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "print_settings_id": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "layer_height": "0.3", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.6 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "500", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "outer_only", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "5000", + "default_jerk": "20", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "0", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.075", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "10", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "30", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.62", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.3", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "10000", + "inner_wall_jerk": "15", + "inner_wall_line_width": "0.62", + "inner_wall_speed": "150", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_line_width": "0.62", + "internal_solid_infill_pattern": "monotonic", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "15%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.62", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "0", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "15", + "outer_wall_line_width": "0.62", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "15", + "overhang_4_4_speed": "10", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "2", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "35", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "1", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "10", + "seam_slope_start_height": "0", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "10000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.62", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "100", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.62", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "40", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "25%", + "top_shell_layers": "3", + "top_shell_thickness": "0.6", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "5000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.62", + "top_surface_pattern": "monotonicline", + "top_surface_speed": "150", + "travel_acceleration": "15000", + "travel_jerk": "12", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "0.8", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "150%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..938312f46e --- /dev/null +++ b/resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "from": "system", + "setting_id": "avPzsOBN3DnXTaol", + "instantiation": "true", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "print_settings_id": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "layer_height": "0.32", + "initial_layer_print_height": "0.32", + "inner_wall_speed": "120", + "outer_wall_speed": "80", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "30", + "top_solid_infill_flow_ratio": "0.95" +} diff --git a/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json new file mode 100644 index 0000000000..d10161ced6 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json @@ -0,0 +1,24 @@ +{ + "type": "process", + "name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "from": "system", + "setting_id": "7pIVSig189FDjOMY", + "instantiation": "true", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "print_settings_id": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle", + "layer_height": "0.36", + "brim_type": "auto_brim", + "default_acceleration": "6000", + "default_jerk": "9", + "elefant_foot_compensation": "0.1", + "inner_wall_acceleration": "6000", + "inner_wall_jerk": "9", + "outer_wall_jerk": "9", + "raft_first_layer_expansion": "5", + "sparse_infill_acceleration": "6000", + "support_threshold_angle": "30", + "top_bottom_infill_wall_overlap": "15%", + "travel_acceleration": "10000", + "travel_jerk": "9" +} diff --git a/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..1de694f388 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,289 @@ +{ + "type": "process", + "name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "0yxg7c5tH07ZMIL4", + "instantiation": "true", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "print_settings_id": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "layer_height": "0.4", + "compatible_printers": [ + "Anycubic Kobra 3 V2 0.8 nozzle" + ], + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "50%", + "alternate_extra_wall": "0", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bottom_solid_infill_flow_ratio": "1", + "bottom_surface_pattern": "monotonic", + "bridge_acceleration": "5000", + "bridge_angle": "0", + "bridge_density": "100%", + "bridge_flow": "0.9", + "bridge_no_support": "0", + "bridge_speed": "30", + "brim_ears_detection_length": "1", + "brim_ears_max_angle": "125", + "brim_object_gap": "0.15", + "brim_type": "outer_only", + "brim_width": "5", + "compatible_printers_condition": "", + "counterbore_hole_bridging": "none", + "default_acceleration": "6000", + "default_jerk": "20", + "detect_narrow_internal_solid_infill": "1", + "detect_overhang_wall": "1", + "detect_thin_wall": "1", + "dont_filter_internal_bridges": "disabled", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "elefant_foot_compensation_layers": "1", + "enable_arc_fitting": "0", + "enable_overhang_speed": "1", + "enable_prime_tower": "1", + "enable_support": "0", + "enforce_support_layers": "0", + "ensure_vertical_shell_thickness": "ensure_all", + "exclude_object": "1", + "extra_perimeters_on_overhangs": "1", + "filter_out_gap_fill": "0", + "flush_into_infill": "0", + "flush_into_objects": "0", + "flush_into_support": "1", + "fuzzy_skin": "none", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_fill_target": "topbottom", + "gap_infill_speed": "50", + "gcode_add_line_number": "0", + "gcode_comments": "0", + "gcode_label_objects": "1", + "hole_to_polyhole": "0", + "hole_to_polyhole_threshold": "0.01", + "hole_to_polyhole_twisted": "1", + "independent_support_layer_height": "1", + "infill_anchor": "400", + "infill_anchor_max": "10", + "infill_combination": "0", + "infill_direction": "45", + "infill_jerk": "9", + "infill_wall_overlap": "15%", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "30", + "initial_layer_jerk": "9", + "initial_layer_line_width": "0.82", + "initial_layer_min_bead_width": "85%", + "initial_layer_print_height": "0.4", + "initial_layer_speed": "30", + "initial_layer_travel_speed": "100%", + "inner_wall_acceleration": "0", + "inner_wall_jerk": "15", + "inner_wall_line_width": "0.82", + "inner_wall_speed": "150", + "interface_shells": "0", + "internal_bridge_flow": "1", + "internal_bridge_speed": "150%", + "internal_solid_infill_acceleration": "10000", + "internal_solid_infill_line_width": "0.82", + "internal_solid_infill_pattern": "zig-zag", + "internal_solid_infill_speed": "150", + "ironing_angle": "-1", + "ironing_flow": "15%", + "ironing_pattern": "zig-zag", + "ironing_spacing": "0.1", + "ironing_speed": "15", + "ironing_type": "no ironing", + "is_infill_first": "0", + "line_width": "0.82", + "make_overhang_printable": "0", + "make_overhang_printable_angle": "55", + "make_overhang_printable_hole_size": "0", + "max_bridge_length": "10", + "max_travel_detour_distance": "0", + "max_volumetric_extrusion_rate_slope": "0", + "max_volumetric_extrusion_rate_slope_segment_length": "5", + "min_bead_width": "85%", + "min_feature_size": "25%", + "min_length_factor": "0.5", + "min_width_top_surface": "300%", + "minimum_sparse_infill_area": "0", + "mmu_segmented_region_interlocking_depth": "0", + "mmu_segmented_region_max_width": "0", + "notes": "", + "only_one_wall_first_layer": "0", + "only_one_wall_top": "1", + "ooze_prevention": "0", + "outer_wall_acceleration": "5000", + "outer_wall_jerk": "15", + "outer_wall_line_width": "0.82", + "outer_wall_speed": "120", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "5", + "overhang_reverse": "0", + "overhang_reverse_internal_only": "0", + "overhang_reverse_threshold": "50%", + "post_process": [], + "precise_outer_wall": "0", + "precise_z_height": "0", + "prime_tower_brim_width": "5", + "prime_tower_width": "35", + "prime_volume": "20", + "print_flow_ratio": "1", + "print_order": "default", + "print_sequence": "by layer", + "raft_contact_distance": "0.1", + "raft_expansion": "1.5", + "raft_first_layer_density": "90%", + "raft_first_layer_expansion": "2", + "raft_layers": "0", + "reduce_crossing_wall": "0", + "reduce_infill_retraction": "1", + "resolution": "0.012", + "role_based_wipe_speed": "1", + "rotate_solid_infill_direction": "1", + "scarf_angle_threshold": "155", + "scarf_joint_flow_ratio": "1", + "scarf_joint_speed": "100%", + "scarf_overhang_threshold": "40%", + "seam_gap": "10%", + "seam_position": "aligned", + "seam_slope_conditional": "0", + "seam_slope_entire_loop": "0", + "seam_slope_inner_walls": "0", + "seam_slope_min_length": "20", + "seam_slope_start_height": "0", + "seam_slope_steps": "10", + "seam_slope_type": "none", + "single_extruder_multi_material_priming": "0", + "skirt_distance": "2", + "skirt_height": "1", + "skirt_loops": "0", + "skirt_speed": "50", + "slice_closing_radius": "0.049", + "slicing_mode": "regular", + "slow_down_layers": "1", + "slowdown_for_curled_perimeters": "0", + "small_area_infill_flow_compensation": "0", + "small_area_infill_flow_compensation_model": [ + "0,0", + "\n0.2,0.4444", + "\n0.4,0.6145", + "\n0.6,0.7059", + "\n0.8,0.7619", + "\n1.5,0.8571", + "\n2,0.8889", + "\n3,0.9231", + "\n5,0.9520", + "\n10,1" + ], + "small_perimeter_speed": "50%", + "small_perimeter_threshold": "0", + "solid_infill_direction": "45", + "solid_infill_filament": "1", + "sparse_infill_acceleration": "5000", + "sparse_infill_density": "15%", + "sparse_infill_filament": "1", + "sparse_infill_line_width": "0.82", + "sparse_infill_pattern": "3dhoneycomb", + "sparse_infill_speed": "100", + "spiral_mode": "0", + "spiral_mode_max_xy_smoothing": "200%", + "spiral_mode_smooth": "0", + "staggered_inner_seams": "0", + "standby_temperature_delta": "0", + "support_angle": "0", + "support_base_pattern": "default", + "support_base_pattern_spacing": "0.2", + "support_bottom_interface_spacing": "0.5", + "support_bottom_z_distance": "0.2", + "support_critical_regions_only": "0", + "support_expansion": "0", + "support_filament": "0", + "support_interface_bottom_layers": "-1", + "support_interface_filament": "0", + "support_interface_loop_pattern": "0", + "support_interface_not_for_body": "1", + "support_interface_pattern": "auto", + "support_interface_spacing": "0.2", + "support_interface_speed": "80", + "support_interface_top_layers": "3", + "support_line_width": "0.82", + "support_object_xy_distance": "0.35", + "support_on_build_plate_only": "1", + "support_remove_small_overhang": "1", + "support_speed": "100", + "support_style": "default", + "support_threshold_angle": "40", + "support_top_z_distance": "0.25", + "support_type": "tree(auto)", + "thick_bridges": "0", + "thick_internal_bridges": "1", + "timelapse_type": "0", + "top_bottom_infill_wall_overlap": "25%", + "top_shell_layers": "3", + "top_shell_thickness": "0.8", + "top_solid_infill_flow_ratio": "0.97", + "top_surface_acceleration": "2000", + "top_surface_jerk": "9", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": "150", + "travel_acceleration": "10000", + "travel_jerk": "12", + "travel_speed": "350", + "travel_speed_z": "0", + "tree_support_adaptive_layer_height": "1", + "tree_support_angle_slow": "25", + "tree_support_auto_brim": "1", + "tree_support_branch_angle": "40", + "tree_support_branch_angle_organic": "40", + "tree_support_branch_diameter": "5", + "tree_support_branch_diameter_angle": "5", + "tree_support_branch_diameter_double_wall": "3", + "tree_support_branch_diameter_organic": "2", + "tree_support_branch_distance": "5", + "tree_support_branch_distance_organic": "1", + "tree_support_brim_width": "3", + "tree_support_tip_diameter": "1.5", + "tree_support_top_rate": "30%", + "tree_support_wall_count": "0", + "wall_direction": "auto", + "wall_distribution_count": "1", + "wall_filament": "1", + "wall_generator": "classic", + "wall_infill_order": "inner wall/outer wall/infill", + "wall_loops": "2", + "wall_sequence": "inner wall/outer wall", + "wall_transition_angle": "10", + "wall_transition_filter_deviation": "25%", + "wall_transition_length": "100%", + "wipe_before_external_loop": "0", + "wipe_on_loops": "0", + "wipe_speed": "80%", + "wipe_tower_bridging": "10", + "wipe_tower_cone_angle": "15", + "wipe_tower_extra_spacing": "150%", + "wipe_tower_extruder": "0", + "wipe_tower_max_purge_speed": "90", + "wipe_tower_no_sparse_layers": "0", + "wipe_tower_rotation_angle": "0", + "wiping_volumes_extruders": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "xy_contour_compensation": "0", + "xy_hole_compensation": "0" +} diff --git a/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json new file mode 100644 index 0000000000..c01e2d63f3 --- /dev/null +++ b/resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "from": "system", + "setting_id": "2cCCPfRX7H33XrMb", + "instantiation": "true", + "filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode", + "print_settings_id": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle", + "layer_height": "0.48", + "initial_layer_print_height": "0.48", + "inner_wall_speed": "180", + "outer_wall_speed": "140", + "overhang_2_4_speed": "40", + "overhang_3_4_speed": "30", + "top_solid_infill_flow_ratio": "0.95" +} diff --git a/resources/profiles/Artillery.json b/resources/profiles/Artillery.json index 180622cf3a..faa5aa0a98 100644 --- a/resources/profiles/Artillery.json +++ b/resources/profiles/Artillery.json @@ -1,6 +1,6 @@ { "name": "Artillery", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "Artillery configurations", "machine_model_list": [ diff --git a/resources/profiles/Artillery/filament/Generic ABS @Artillery.json b/resources/profiles/Artillery/filament/Generic ABS @Artillery.json index caf687b95e..bad2754127 100644 --- a/resources/profiles/Artillery/filament/Generic ABS @Artillery.json +++ b/resources/profiles/Artillery/filament/Generic ABS @Artillery.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFY9muEs", - "setting_id": "DNgTEZpEz8bJoobJ", "name": "Generic ABS @Artillery", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_abs", "renamed_from": "Artillery Generic ABS", + "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "DNgTEZpEz8bJoobJ", + "filament_id": "OFY9muEs", + "instantiation": "true", "filament_flow_ratio": [ "0.926" ], diff --git a/resources/profiles/Artillery/filament/Generic ASA @Artillery.json b/resources/profiles/Artillery/filament/Generic ASA @Artillery.json index 74ef4c775f..afc3e0cafc 100644 --- a/resources/profiles/Artillery/filament/Generic ASA @Artillery.json +++ b/resources/profiles/Artillery/filament/Generic ASA @Artillery.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFLPAxz3", - "setting_id": "xWHuScm0fPJCqjVx", "name": "Generic ASA @Artillery", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_asa", "renamed_from": "Artillery Generic ASA", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "xWHuScm0fPJCqjVx", + "filament_id": "OFLPAxz3", + "instantiation": "true", "filament_flow_ratio": [ "0.93" ], diff --git a/resources/profiles/Artillery/filament/Generic PETG @Artillery.json b/resources/profiles/Artillery/filament/Generic PETG @Artillery.json index aa354e517d..8abc30673a 100644 --- a/resources/profiles/Artillery/filament/Generic PETG @Artillery.json +++ b/resources/profiles/Artillery/filament/Generic PETG @Artillery.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFYPdQJh", - "setting_id": "6wZKfV2XvuJSUSwl", "name": "Generic PETG @Artillery", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_pet", "renamed_from": "Artillery Generic PETG", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "6wZKfV2XvuJSUSwl", + "filament_id": "OFYPdQJh", + "instantiation": "true", "reduce_fan_stop_start_freq": [ "1" ], diff --git a/resources/profiles/Artillery/filament/Generic PLA @Artillery.json b/resources/profiles/Artillery/filament/Generic PLA @Artillery.json index d691a9b470..6b5a88cfda 100644 --- a/resources/profiles/Artillery/filament/Generic PLA @Artillery.json +++ b/resources/profiles/Artillery/filament/Generic PLA @Artillery.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFDSrzZ8", - "setting_id": "T0sW3uMBr94Y1X1G", "name": "Generic PLA @Artillery", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_pla", "renamed_from": "Artillery Generic PLA", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "T0sW3uMBr94Y1X1G", + "filament_id": "OFDSrzZ8", + "instantiation": "true", "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Artillery/filament/Generic PLA-CF @Artillery.json b/resources/profiles/Artillery/filament/Generic PLA-CF @Artillery.json index 08fd583e18..e3541dd937 100644 --- a/resources/profiles/Artillery/filament/Generic PLA-CF @Artillery.json +++ b/resources/profiles/Artillery/filament/Generic PLA-CF @Artillery.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFWbdGsC", - "setting_id": "Gxafdb0zYnf9kPwa", "name": "Generic PLA-CF @Artillery", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_pla", "renamed_from": "Artillery Generic PLA-CF", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Gxafdb0zYnf9kPwa", + "filament_id": "OFWbdGsC", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Artillery/filament/Generic TPU @Artillery.json b/resources/profiles/Artillery/filament/Generic TPU @Artillery.json index f1270d0afb..75a423c165 100644 --- a/resources/profiles/Artillery/filament/Generic TPU @Artillery.json +++ b/resources/profiles/Artillery/filament/Generic TPU @Artillery.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFgbpcy9", - "setting_id": "dWhysRiE5GrAGyME", "name": "Generic TPU @Artillery", - "from": "system", - "instantiation": "true", - "inherits": "fdm_filament_tpu", "renamed_from": "Artillery Generic TPU", + "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "dWhysRiE5GrAGyME", + "filament_id": "OFgbpcy9", + "instantiation": "true", "filament_max_volumetric_speed": [ "3.2" ], diff --git a/resources/profiles/Artillery/filament/fdm_filament_abs.json b/resources/profiles/Artillery/filament/fdm_filament_abs.json index 0b06432204..5eb599e552 100644 --- a/resources/profiles/Artillery/filament/fdm_filament_abs.json +++ b/resources/profiles/Artillery/filament/fdm_filament_abs.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_abs", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "105" ], diff --git a/resources/profiles/Artillery/filament/fdm_filament_asa.json b/resources/profiles/Artillery/filament/fdm_filament_asa.json index 930a2d3d0f..795413a24d 100644 --- a/resources/profiles/Artillery/filament/fdm_filament_asa.json +++ b/resources/profiles/Artillery/filament/fdm_filament_asa.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_asa", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "105" ], diff --git a/resources/profiles/Artillery/filament/fdm_filament_pet.json b/resources/profiles/Artillery/filament/fdm_filament_pet.json index 379e0e0013..da7e5db8ec 100644 --- a/resources/profiles/Artillery/filament/fdm_filament_pet.json +++ b/resources/profiles/Artillery/filament/fdm_filament_pet.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pet", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "60" ], diff --git a/resources/profiles/Artillery/filament/fdm_filament_pla.json b/resources/profiles/Artillery/filament/fdm_filament_pla.json index 062c3ea6f5..e8f09e7717 100644 --- a/resources/profiles/Artillery/filament/fdm_filament_pla.json +++ b/resources/profiles/Artillery/filament/fdm_filament_pla.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pla", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "fan_cooling_layer_time": [ "100" ], diff --git a/resources/profiles/Artillery/filament/fdm_filament_tpu.json b/resources/profiles/Artillery/filament/fdm_filament_tpu.json index 91b0b1a200..fe1520851b 100644 --- a/resources/profiles/Artillery/filament/fdm_filament_tpu.json +++ b/resources/profiles/Artillery/filament/fdm_filament_tpu.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_tpu", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "30" ], diff --git a/resources/profiles/Artillery/machine/Artillery Genius 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Genius 0.4 nozzle.json index fec7ef73d3..71250b7ccd 100644 --- a/resources/profiles/Artillery/machine/Artillery Genius 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Genius 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "F9lEQfH826Mqt6u3", "name": "Artillery Genius 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "F9lEQfH826Mqt6u3", + "instantiation": "true", "printer_model": "Artillery Genius", "default_print_profile": "0.20mm Standard @Artillery Genius", "nozzle_diameter": [ diff --git a/resources/profiles/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json index abac060832..27dbc934c8 100644 --- a/resources/profiles/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Genius Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "afpW4NvrOWzQvHbB", "name": "Artillery Genius Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "afpW4NvrOWzQvHbB", + "instantiation": "true", "printer_model": "Artillery Genius Pro", "default_print_profile": "0.20mm Standard @Artillery Genius Pro", "nozzle_diameter": [ diff --git a/resources/profiles/Artillery/machine/Artillery Hornet 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Hornet 0.4 nozzle.json index 232b68d62e..65a60c6649 100644 --- a/resources/profiles/Artillery/machine/Artillery Hornet 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Hornet 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "02YSChoFQuBRQ8vf", "name": "Artillery Hornet 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "02YSChoFQuBRQ8vf", + "instantiation": "true", "printer_model": "Artillery Hornet", "default_print_profile": "0.20mm Standard @Artillery Hornet", "nozzle_diameter": [ diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json index ab83e7d429..3e10106e08 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X1 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "nY4RXX9Ylh7AIc4U", "name": "Artillery Sidewinder X1 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "nY4RXX9Ylh7AIc4U", + "instantiation": "true", "printer_model": "Artillery Sidewinder X1", "default_print_profile": "0.20mm Standard @Artillery X1", "nozzle_diameter": [ diff --git a/resources/profiles/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json b/resources/profiles/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json index 416ddfb056..a4ac11e7f9 100644 --- a/resources/profiles/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json +++ b/resources/profiles/Artillery/machine/Artillery Sidewinder X2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "cUhse9TrF7ElM5dh", "name": "Artillery Sidewinder X2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "cUhse9TrF7ElM5dh", + "instantiation": "true", "printer_model": "Artillery Sidewinder X2", "default_print_profile": "0.20mm Standard @Artillery X2", "nozzle_diameter": [ diff --git a/resources/profiles/BBL.json b/resources/profiles/BBL.json index 7491f4064d..3f4f91efac 100644 --- a/resources/profiles/BBL.json +++ b/resources/profiles/BBL.json @@ -1,9 +1,9 @@ { "name": "Bambulab", "url": "http://www.bambulab.com/Parameters/vendor/BBL.json", - "version": "02.01.00.28", + "version": "02.08.00.11", "force_update": "0", - "description": "BBL configurations", + "description": "the initial version of BBL configurations", "machine_model_list": [ { "name": "Bambu Lab A1", @@ -62,6 +62,8802 @@ "sub_path": "machine/Bambu Lab X2D.json" } ], + "filament_list": [ + { + "name": "fdm_filament_common", + "sub_path": "filament/fdm_filament_common.json" + }, + { + "name": "fdm_filament_template_direct_bowden", + "sub_path": "filament/fdm_filament_template_direct_bowden.json" + }, + { + "name": "fdm_filament_template_direct_bowden_e3d", + "sub_path": "filament/fdm_filament_template_direct_bowden_e3d.json" + }, + { + "name": "fdm_filament_template_direct_dual", + "sub_path": "filament/fdm_filament_template_direct_dual.json" + }, + { + "name": "fdm_filament_template_direct_dual_e3d", + "sub_path": "filament/fdm_filament_template_direct_dual_e3d.json" + }, + { + "name": "fdm_filament_abs", + "sub_path": "filament/fdm_filament_abs.json" + }, + { + "name": "fdm_filament_asa", + "sub_path": "filament/fdm_filament_asa.json" + }, + { + "name": "fdm_filament_bvoh", + "sub_path": "filament/fdm_filament_bvoh.json" + }, + { + "name": "fdm_filament_eva", + "sub_path": "filament/fdm_filament_eva.json" + }, + { + "name": "fdm_filament_hips", + "sub_path": "filament/fdm_filament_hips.json" + }, + { + "name": "fdm_filament_pa", + "sub_path": "filament/fdm_filament_pa.json" + }, + { + "name": "fdm_filament_pc", + "sub_path": "filament/fdm_filament_pc.json" + }, + { + "name": "fdm_filament_pctg", + "sub_path": "filament/fdm_filament_pctg.json" + }, + { + "name": "fdm_filament_pe", + "sub_path": "filament/fdm_filament_pe.json" + }, + { + "name": "fdm_filament_pet", + "sub_path": "filament/fdm_filament_pet.json" + }, + { + "name": "fdm_filament_pha", + "sub_path": "filament/fdm_filament_pha.json" + }, + { + "name": "fdm_filament_pla", + "sub_path": "filament/fdm_filament_pla.json" + }, + { + "name": "fdm_filament_pp", + "sub_path": "filament/fdm_filament_pp.json" + }, + { + "name": "fdm_filament_ppa", + "sub_path": "filament/fdm_filament_ppa.json" + }, + { + "name": "fdm_filament_pps", + "sub_path": "filament/fdm_filament_pps.json" + }, + { + "name": "fdm_filament_pva", + "sub_path": "filament/fdm_filament_pva.json" + }, + { + "name": "fdm_filament_tpu", + "sub_path": "filament/fdm_filament_tpu.json" + }, + { + "name": "Bambu ABS @base", + "sub_path": "filament/Bambu ABS @base.json" + }, + { + "name": "Bambu ABS-GF @base", + "sub_path": "filament/Bambu ABS-GF @base.json" + }, + { + "name": "Bambu Support for ABS @base", + "sub_path": "filament/Bambu Support for ABS @base.json" + }, + { + "name": "Generic ABS @base", + "sub_path": "filament/Generic ABS @base.json" + }, + { + "name": "PolyLite ABS @base", + "sub_path": "filament/PolyLite ABS @base.json" + }, + { + "name": "Bambu ASA @base", + "sub_path": "filament/Bambu ASA @base.json" + }, + { + "name": "Bambu ASA-Aero @base", + "sub_path": "filament/Bambu ASA-Aero @base.json" + }, + { + "name": "Bambu ASA-CF @base", + "sub_path": "filament/Bambu ASA-CF @base.json" + }, + { + "name": "Generic ASA @base", + "sub_path": "filament/Generic ASA @base.json" + }, + { + "name": "PolyLite ASA @base", + "sub_path": "filament/PolyLite ASA @base.json" + }, + { + "name": "Generic BVOH @base", + "sub_path": "filament/Generic BVOH @base.json" + }, + { + "name": "Generic EVA @base", + "sub_path": "filament/Generic EVA @base.json" + }, + { + "name": "Generic HIPS @base", + "sub_path": "filament/Generic HIPS @base.json" + }, + { + "name": "Bambu PA-CF @base", + "sub_path": "filament/Bambu PA-CF @base.json" + }, + { + "name": "Bambu PA6-CF @base", + "sub_path": "filament/Bambu PA6-CF @base.json" + }, + { + "name": "Bambu PA6-GF @base", + "sub_path": "filament/Bambu PA6-GF @base.json" + }, + { + "name": "Bambu PAHT-CF @base", + "sub_path": "filament/Bambu PAHT-CF @base.json" + }, + { + "name": "Bambu Support For PA/PET @base", + "sub_path": "filament/Bambu Support For PA PET @base.json" + }, + { + "name": "Bambu Support G @base", + "sub_path": "filament/Bambu Support G @base.json" + }, + { + "name": "Fiberon PA12-CF @base", + "sub_path": "filament/Polymaker/Fiberon PA12-CF @base.json" + }, + { + "name": "Fiberon PA6-CF @base", + "sub_path": "filament/Polymaker/Fiberon PA6-CF @base.json" + }, + { + "name": "Fiberon PA6-GF @base", + "sub_path": "filament/Polymaker/Fiberon PA6-GF @base.json" + }, + { + "name": "Fiberon PA612-CF @base", + "sub_path": "filament/Polymaker/Fiberon PA612-CF @base.json" + }, + { + "name": "Generic PA @base", + "sub_path": "filament/Generic PA @base.json" + }, + { + "name": "Generic PA-CF @base", + "sub_path": "filament/Generic PA-CF @base.json" + }, + { + "name": "Bambu PC @base", + "sub_path": "filament/Bambu PC @base.json" + }, + { + "name": "Bambu PC FR @base", + "sub_path": "filament/Bambu PC FR @base.json" + }, + { + "name": "Generic PC @base", + "sub_path": "filament/Generic PC @base.json" + }, + { + "name": "Generic PCTG @base", + "sub_path": "filament/Generic PCTG @base.json" + }, + { + "name": "Generic PE @base", + "sub_path": "filament/Generic PE @base.json" + }, + { + "name": "Generic PE-CF @base", + "sub_path": "filament/Generic PE-CF @base.json" + }, + { + "name": "Bambu PET-CF @base", + "sub_path": "filament/Bambu PET-CF @base.json" + }, + { + "name": "Bambu PETG Basic @base", + "sub_path": "filament/Bambu PETG Basic @base.json" + }, + { + "name": "Bambu PETG HF @base", + "sub_path": "filament/Bambu PETG HF @base.json" + }, + { + "name": "Bambu PETG Matte @base", + "sub_path": "filament/Bambu PETG Matte @base.json" + }, + { + "name": "Bambu PETG Translucent @base", + "sub_path": "filament/Bambu PETG Translucent @base.json" + }, + { + "name": "Bambu PETG-CF @base", + "sub_path": "filament/Bambu PETG-CF @base.json" + }, + { + "name": "Fiberon PET-CF @base", + "sub_path": "filament/Polymaker/Fiberon PET-CF @base.json" + }, + { + "name": "Fiberon PETG-ESD @base", + "sub_path": "filament/Polymaker/Fiberon PETG-ESD @base.json" + }, + { + "name": "Fiberon PETG-rCF @base", + "sub_path": "filament/Polymaker/Fiberon PETG-rCF @base.json" + }, + { + "name": "Generic PETG @base", + "sub_path": "filament/Generic PETG @base.json" + }, + { + "name": "Generic PETG HF @base", + "sub_path": "filament/Generic PETG HF @base.json" + }, + { + "name": "Generic PETG-CF @base", + "sub_path": "filament/Generic PETG-CF @base.json" + }, + { + "name": "PolyLite PETG @base", + "sub_path": "filament/PolyLite PETG @base.json" + }, + { + "name": "SUNLU PETG @base", + "sub_path": "filament/SUNLU/SUNLU PETG @base.json" + }, + { + "name": "Generic PHA @base", + "sub_path": "filament/Generic PHA @base.json" + }, + { + "name": "Bambu PLA Aero @base", + "sub_path": "filament/Bambu PLA Aero @base.json" + }, + { + "name": "Bambu PLA Basic @base", + "sub_path": "filament/Bambu PLA Basic @base.json" + }, + { + "name": "Bambu PLA Dynamic @base", + "sub_path": "filament/Bambu PLA Dynamic @base.json" + }, + { + "name": "Bambu PLA Galaxy @base", + "sub_path": "filament/Bambu PLA Galaxy @base.json" + }, + { + "name": "Bambu PLA Glow @base", + "sub_path": "filament/Bambu PLA Glow @base.json" + }, + { + "name": "Bambu PLA Lite @base", + "sub_path": "filament/Bambu PLA Lite @base.json" + }, + { + "name": "Bambu PLA Marble @base", + "sub_path": "filament/Bambu PLA Marble @base.json" + }, + { + "name": "Bambu PLA Matte @base", + "sub_path": "filament/Bambu PLA Matte @base.json" + }, + { + "name": "Bambu PLA Metal @base", + "sub_path": "filament/Bambu PLA Metal @base.json" + }, + { + "name": "Bambu PLA Pure @base", + "sub_path": "filament/Bambu PLA Pure @base.json" + }, + { + "name": "Bambu PLA Silk @base", + "sub_path": "filament/Bambu PLA Silk @base.json" + }, + { + "name": "Bambu PLA Silk+ @base", + "sub_path": "filament/Bambu PLA Silk+ @base.json" + }, + { + "name": "Bambu PLA Sparkle @base", + "sub_path": "filament/Bambu PLA Sparkle @base.json" + }, + { + "name": "Bambu PLA Tough @base", + "sub_path": "filament/Bambu PLA Tough @base.json" + }, + { + "name": "Bambu PLA Tough+ @base", + "sub_path": "filament/Bambu PLA Tough+ @base.json" + }, + { + "name": "Bambu PLA Translucent @base", + "sub_path": "filament/Bambu PLA Translucent @base.json" + }, + { + "name": "Bambu PLA Wood @base", + "sub_path": "filament/Bambu PLA Wood @base.json" + }, + { + "name": "Bambu PLA-CF @base", + "sub_path": "filament/Bambu PLA-CF @base.json" + }, + { + "name": "Bambu Support For PLA @base", + "sub_path": "filament/Bambu Support For PLA @base.json" + }, + { + "name": "Bambu Support For PLA/PETG @base", + "sub_path": "filament/Bambu Support For PLA-PETG @base.json" + }, + { + "name": "Bambu Support W @base", + "sub_path": "filament/Bambu Support W @base.json" + }, + { + "name": "Generic PLA @base", + "sub_path": "filament/Generic PLA @base.json" + }, + { + "name": "Generic PLA High Speed @base", + "sub_path": "filament/Generic PLA High Speed @base.json" + }, + { + "name": "Generic PLA Silk @base", + "sub_path": "filament/Generic PLA Silk @base.json" + }, + { + "name": "Generic PLA-CF @base", + "sub_path": "filament/Generic PLA-CF @base.json" + }, + { + "name": "Overture Matte PLA @base", + "sub_path": "filament/Overture Matte PLA @base.json" + }, + { + "name": "Overture PLA @base", + "sub_path": "filament/Overture PLA @base.json" + }, + { + "name": "PolyLite PLA @base", + "sub_path": "filament/PolyLite PLA @base.json" + }, + { + "name": "PolyTerra PLA @base", + "sub_path": "filament/PolyTerra PLA @base.json" + }, + { + "name": "SUNLU PLA Marble @base", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @base.json" + }, + { + "name": "SUNLU PLA Matte @base", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @base.json" + }, + { + "name": "SUNLU PLA+ 2.0 @base", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @base.json" + }, + { + "name": "SUNLU PLA+ @base", + "sub_path": "filament/SUNLU/SUNLU PLA+ @base.json" + }, + { + "name": "SUNLU Silk PLA+ @base", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @base.json" + }, + { + "name": "SUNLU Wood PLA @base", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json" + }, + { + "name": "eSUN PLA+ @base", + "sub_path": "filament/eSUN PLA+ @base.json" + }, + { + "name": "Generic PP @base", + "sub_path": "filament/Generic PP @base.json" + }, + { + "name": "Generic PP-CF @base", + "sub_path": "filament/Generic PP-CF @base.json" + }, + { + "name": "Generic PP-GF @base", + "sub_path": "filament/Generic PP-GF @base.json" + }, + { + "name": "Bambu PPA-CF @base", + "sub_path": "filament/Bambu PPA-CF @base.json" + }, + { + "name": "Generic PPA-CF @base", + "sub_path": "filament/Generic PPA-CF @base.json" + }, + { + "name": "Generic PPA-GF @base", + "sub_path": "filament/Generic PPA-GF @base.json" + }, + { + "name": "Bambu PPS-CF @base", + "sub_path": "filament/Bambu PPS-CF @base.json" + }, + { + "name": "Generic PPS @base", + "sub_path": "filament/Generic PPS @base.json" + }, + { + "name": "Generic PPS-CF @base", + "sub_path": "filament/Generic PPS-CF @base.json" + }, + { + "name": "Bambu PVA @base", + "sub_path": "filament/Bambu PVA @base.json" + }, + { + "name": "Generic PVA @base", + "sub_path": "filament/Generic PVA @base.json" + }, + { + "name": "Bambu TPU 85A @base", + "sub_path": "filament/Bambu TPU 85A @base.json" + }, + { + "name": "Bambu TPU 90A @base", + "sub_path": "filament/Bambu TPU 90A @base.json" + }, + { + "name": "Bambu TPU 95A @base", + "sub_path": "filament/Bambu TPU 95A @base.json" + }, + { + "name": "Bambu TPU 95A HF @base", + "sub_path": "filament/Bambu TPU 95A HF @base.json" + }, + { + "name": "Bambu TPU for AMS @base", + "sub_path": "filament/Bambu TPU for AMS @base.json" + }, + { + "name": "Generic TPU @base", + "sub_path": "filament/Generic TPU @base.json" + }, + { + "name": "Generic TPU for AMS @base", + "sub_path": "filament/Generic TPU for AMS @base.json" + }, + { + "name": "Bambu ABS @BBL A1", + "sub_path": "filament/Bambu ABS @BBL A1.json" + }, + { + "name": "Bambu ABS @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2C", + "sub_path": "filament/Bambu ABS @BBL H2C.json" + }, + { + "name": "Bambu ABS @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2D", + "sub_path": "filament/Bambu ABS @BBL H2D.json" + }, + { + "name": "Bambu ABS @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2DP", + "sub_path": "filament/Bambu ABS @BBL H2DP.json" + }, + { + "name": "Bambu ABS @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2S", + "sub_path": "filament/Bambu ABS @BBL H2S.json" + }, + { + "name": "Bambu ABS @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu ABS @BBL P1P", + "sub_path": "filament/P1P/Bambu ABS @BBL P1P.json" + }, + { + "name": "Bambu ABS @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu ABS @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL P1S 0.4 nozzle", + "sub_path": "filament/Bambu ABS @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Bambu ABS @BBL P1S 0.6 nozzle", + "sub_path": "filament/Bambu ABS @BBL P1S 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL P2S", + "sub_path": "filament/Bambu ABS @BBL P2S.json" + }, + { + "name": "Bambu ABS @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu ABS @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1C", + "sub_path": "filament/Bambu ABS @BBL X1C.json" + }, + { + "name": "Bambu ABS @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1E", + "sub_path": "filament/Bambu ABS @BBL X1E.json" + }, + { + "name": "Bambu ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X1E 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL X1E 0.8 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X2D", + "sub_path": "filament/Bambu ABS @BBL X2D.json" + }, + { + "name": "Bambu ABS @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu ABS @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu ABS @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu ABS @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu ABS @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu ABS-GF @BBL A1", + "sub_path": "filament/Bambu ABS-GF @BBL A1.json" + }, + { + "name": "Bambu ABS-GF @BBL H2C", + "sub_path": "filament/Bambu ABS-GF @BBL H2C.json" + }, + { + "name": "Bambu ABS-GF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu ABS-GF @BBL H2D", + "sub_path": "filament/Bambu ABS-GF @BBL H2D.json" + }, + { + "name": "Bambu ABS-GF @BBL H2DP", + "sub_path": "filament/Bambu ABS-GF @BBL H2DP.json" + }, + { + "name": "Bambu ABS-GF @BBL H2S", + "sub_path": "filament/Bambu ABS-GF @BBL H2S.json" + }, + { + "name": "Bambu ABS-GF @BBL P1P", + "sub_path": "filament/Bambu ABS-GF @BBL P1P.json" + }, + { + "name": "Bambu ABS-GF @BBL P2S", + "sub_path": "filament/Bambu ABS-GF @BBL P2S.json" + }, + { + "name": "Bambu ABS-GF @BBL X1C", + "sub_path": "filament/Bambu ABS-GF @BBL X1C.json" + }, + { + "name": "Bambu ABS-GF @BBL X2D", + "sub_path": "filament/Bambu ABS-GF @BBL X2D.json" + }, + { + "name": "Bambu ABS-GF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL A1", + "sub_path": "filament/Bambu Support for ABS @BBL A1.json" + }, + { + "name": "Bambu Support for ABS @BBL H2C", + "sub_path": "filament/Bambu Support for ABS @BBL H2C.json" + }, + { + "name": "Bambu Support for ABS @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL H2D", + "sub_path": "filament/Bambu Support for ABS @BBL H2D.json" + }, + { + "name": "Bambu Support for ABS @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL H2DP", + "sub_path": "filament/Bambu Support for ABS @BBL H2DP.json" + }, + { + "name": "Bambu Support for ABS @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL H2S", + "sub_path": "filament/Bambu Support for ABS @BBL H2S.json" + }, + { + "name": "Bambu Support for ABS @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL P2S", + "sub_path": "filament/Bambu Support for ABS @BBL P2S.json" + }, + { + "name": "Bambu Support for ABS @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL X1C", + "sub_path": "filament/Bambu Support for ABS @BBL X1C.json" + }, + { + "name": "Bambu Support for ABS @BBL X2D", + "sub_path": "filament/Bambu Support for ABS @BBL X2D.json" + }, + { + "name": "Bambu Support for ABS @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu Support for ABS @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu Support for ABS @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Generic ABS", + "sub_path": "filament/Generic ABS.json" + }, + { + "name": "Generic ABS @0.2 nozzle", + "sub_path": "filament/Generic ABS @0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL A1", + "sub_path": "filament/Generic ABS @BBL A1.json" + }, + { + "name": "Generic ABS @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL H2C", + "sub_path": "filament/Generic ABS @BBL H2C.json" + }, + { + "name": "Generic ABS @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic ABS @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic ABS @BBL H2D", + "sub_path": "filament/Generic ABS @BBL H2D.json" + }, + { + "name": "Generic ABS @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic ABS @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic ABS @BBL P1P", + "sub_path": "filament/P1P/Generic ABS @BBL P1P.json" + }, + { + "name": "Generic ABS @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL P2S", + "sub_path": "filament/Generic ABS @BBL P2S.json" + }, + { + "name": "Generic ABS @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL X2D", + "sub_path": "filament/Generic ABS @BBL X2D.json" + }, + { + "name": "Generic ABS @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL A1", + "sub_path": "filament/PolyLite ABS @BBL A1.json" + }, + { + "name": "PolyLite ABS @BBL A1 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL A1 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL H2D", + "sub_path": "filament/PolyLite ABS @BBL H2D.json" + }, + { + "name": "PolyLite ABS @BBL H2D 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL H2D 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL H2DP", + "sub_path": "filament/PolyLite ABS @BBL H2DP.json" + }, + { + "name": "PolyLite ABS @BBL H2DP 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL P1P", + "sub_path": "filament/PolyLite ABS @BBL P1P.json" + }, + { + "name": "PolyLite ABS @BBL X1C", + "sub_path": "filament/PolyLite ABS @BBL X1C.json" + }, + { + "name": "PolyLite ABS @BBL X1E", + "sub_path": "filament/PolyLite ABS @BBL X1E.json" + }, + { + "name": "PolyLite ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL A1 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL A1 0.4 nozzle.json" + }, + { + "name": "Bambu ASA @BBL A1 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL A1 0.6 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2C", + "sub_path": "filament/Bambu ASA @BBL H2C.json" + }, + { + "name": "Bambu ASA @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2S", + "sub_path": "filament/Bambu ASA @BBL H2S.json" + }, + { + "name": "Bambu ASA @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu ASA @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu ASA @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu ASA @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu ASA @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu ASA @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu ASA @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1 0.6 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1 0.6 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1C", + "sub_path": "filament/Bambu ASA @BBL X1C.json" + }, + { + "name": "Bambu ASA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1C 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1C 0.4 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1E", + "sub_path": "filament/Bambu ASA @BBL X1E.json" + }, + { + "name": "Bambu ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X1E 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL X1E 0.4 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X2D", + "sub_path": "filament/Bambu ASA @BBL X2D.json" + }, + { + "name": "Bambu ASA @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu ASA @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu ASA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu ASA @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu ASA @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu ASA-Aero @BBL A1", + "sub_path": "filament/Bambu ASA-Aero @BBL A1.json" + }, + { + "name": "Bambu ASA-Aero @BBL H2C", + "sub_path": "filament/Bambu ASA-Aero @BBL H2C.json" + }, + { + "name": "Bambu ASA-Aero @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu ASA-Aero @BBL H2D", + "sub_path": "filament/Bambu ASA-Aero @BBL H2D.json" + }, + { + "name": "Bambu ASA-Aero @BBL H2DP", + "sub_path": "filament/Bambu ASA-Aero @BBL H2DP.json" + }, + { + "name": "Bambu ASA-Aero @BBL H2S", + "sub_path": "filament/Bambu ASA-Aero @BBL H2S.json" + }, + { + "name": "Bambu ASA-Aero @BBL P1P", + "sub_path": "filament/Bambu ASA-Aero @BBL P1P.json" + }, + { + "name": "Bambu ASA-Aero @BBL P2S", + "sub_path": "filament/Bambu ASA-Aero @BBL P2S.json" + }, + { + "name": "Bambu ASA-Aero @BBL X1C", + "sub_path": "filament/Bambu ASA-Aero @BBL X1C.json" + }, + { + "name": "Bambu ASA-Aero @BBL X2D", + "sub_path": "filament/Bambu ASA-Aero @BBL X2D.json" + }, + { + "name": "Bambu ASA-Aero @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL A1", + "sub_path": "filament/Bambu ASA-CF @BBL A1.json" + }, + { + "name": "Bambu ASA-CF @BBL A1 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL H2C", + "sub_path": "filament/Bambu ASA-CF @BBL H2C.json" + }, + { + "name": "Bambu ASA-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL H2S", + "sub_path": "filament/Bambu ASA-CF @BBL H2S.json" + }, + { + "name": "Bambu ASA-CF @BBL P1P", + "sub_path": "filament/Bambu ASA-CF @BBL P1P.json" + }, + { + "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL X1C", + "sub_path": "filament/Bambu ASA-CF @BBL X1C.json" + }, + { + "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu ASA-CF @BBL X2D", + "sub_path": "filament/Bambu ASA-CF @BBL X2D.json" + }, + { + "name": "Bambu ASA-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic ASA", + "sub_path": "filament/Generic ASA.json" + }, + { + "name": "Generic ASA @0.2 nozzle", + "sub_path": "filament/Generic ASA @0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL A1", + "sub_path": "filament/Generic ASA @BBL A1.json" + }, + { + "name": "Generic ASA @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL H2C", + "sub_path": "filament/Generic ASA @BBL H2C.json" + }, + { + "name": "Generic ASA @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic ASA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic ASA @BBL H2D", + "sub_path": "filament/Generic ASA @BBL H2D.json" + }, + { + "name": "Generic ASA @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic ASA @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic ASA @BBL P1P", + "sub_path": "filament/P1P/Generic ASA @BBL P1P.json" + }, + { + "name": "Generic ASA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL P2S", + "sub_path": "filament/Generic ASA @BBL P2S.json" + }, + { + "name": "Generic ASA @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL X2D", + "sub_path": "filament/Generic ASA @BBL X2D.json" + }, + { + "name": "Generic ASA @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic ASA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL A1", + "sub_path": "filament/PolyLite ASA @BBL A1.json" + }, + { + "name": "PolyLite ASA @BBL A1 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL A1 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL H2D", + "sub_path": "filament/PolyLite ASA @BBL H2D.json" + }, + { + "name": "PolyLite ASA @BBL H2D 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL H2DP", + "sub_path": "filament/PolyLite ASA @BBL H2DP.json" + }, + { + "name": "PolyLite ASA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL P1P", + "sub_path": "filament/PolyLite ASA @BBL P1P.json" + }, + { + "name": "PolyLite ASA @BBL X1C", + "sub_path": "filament/PolyLite ASA @BBL X1C.json" + }, + { + "name": "PolyLite ASA @BBL X1E", + "sub_path": "filament/PolyLite ASA @BBL X1E.json" + }, + { + "name": "Generic BVOH @BBL A1", + "sub_path": "filament/Generic BVOH @BBL A1.json" + }, + { + "name": "Generic BVOH @BBL A1M", + "sub_path": "filament/Generic BVOH @BBL A1M.json" + }, + { + "name": "Generic BVOH @BBL A2L", + "sub_path": "filament/Generic BVOH @BBL A2L.json" + }, + { + "name": "Generic BVOH @BBL H2C", + "sub_path": "filament/Generic BVOH @BBL H2C.json" + }, + { + "name": "Generic BVOH @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic BVOH @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic BVOH @BBL H2D", + "sub_path": "filament/Generic BVOH @BBL H2D.json" + }, + { + "name": "Generic BVOH @BBL H2DP", + "sub_path": "filament/Generic BVOH @BBL H2DP.json" + }, + { + "name": "Generic BVOH @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic BVOH @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic BVOH @BBL P2S", + "sub_path": "filament/Generic BVOH @BBL P2S.json" + }, + { + "name": "Generic BVOH @BBL X1C", + "sub_path": "filament/Generic BVOH @BBL X1C.json" + }, + { + "name": "Generic BVOH @BBL X2D", + "sub_path": "filament/Generic BVOH @BBL X2D.json" + }, + { + "name": "Generic BVOH @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic BVOH @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic EVA @BBL A1", + "sub_path": "filament/Generic EVA @BBL A1.json" + }, + { + "name": "Generic EVA @BBL A1M", + "sub_path": "filament/Generic EVA @BBL A1M.json" + }, + { + "name": "Generic EVA @BBL A2L", + "sub_path": "filament/Generic EVA @BBL A2L.json" + }, + { + "name": "Generic EVA @BBL H2C", + "sub_path": "filament/Generic EVA @BBL H2C.json" + }, + { + "name": "Generic EVA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic EVA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic EVA @BBL H2D", + "sub_path": "filament/Generic EVA @BBL H2D.json" + }, + { + "name": "Generic EVA @BBL H2DP", + "sub_path": "filament/Generic EVA @BBL H2DP.json" + }, + { + "name": "Generic EVA @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic EVA @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic EVA @BBL P2S", + "sub_path": "filament/Generic EVA @BBL P2S.json" + }, + { + "name": "Generic EVA @BBL X1C", + "sub_path": "filament/Generic EVA @BBL X1C.json" + }, + { + "name": "Generic EVA @BBL X2D", + "sub_path": "filament/Generic EVA @BBL X2D.json" + }, + { + "name": "Generic EVA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic EVA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic HIPS @BBL A1", + "sub_path": "filament/Generic HIPS @BBL A1.json" + }, + { + "name": "Generic HIPS @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL A1M", + "sub_path": "filament/Generic HIPS @BBL A1M.json" + }, + { + "name": "Generic HIPS @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL A2L", + "sub_path": "filament/Generic HIPS @BBL A2L.json" + }, + { + "name": "Generic HIPS @BBL A2L 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL H2C", + "sub_path": "filament/Generic HIPS @BBL H2C.json" + }, + { + "name": "Generic HIPS @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic HIPS @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic HIPS @BBL H2D", + "sub_path": "filament/Generic HIPS @BBL H2D.json" + }, + { + "name": "Generic HIPS @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL H2DP", + "sub_path": "filament/Generic HIPS @BBL H2DP.json" + }, + { + "name": "Generic HIPS @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic HIPS @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic HIPS @BBL P2S", + "sub_path": "filament/Generic HIPS @BBL P2S.json" + }, + { + "name": "Generic HIPS @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL X1C", + "sub_path": "filament/Generic HIPS @BBL X1C.json" + }, + { + "name": "Generic HIPS @BBL X1C 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL X2D", + "sub_path": "filament/Generic HIPS @BBL X2D.json" + }, + { + "name": "Generic HIPS @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic HIPS @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic HIPS @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic HIPS @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PA-CF @BBL A1", + "sub_path": "filament/Bambu PA-CF @BBL A1.json" + }, + { + "name": "Bambu PA-CF @BBL H2C", + "sub_path": "filament/Bambu PA-CF @BBL H2C.json" + }, + { + "name": "Bambu PA-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PA-CF @BBL H2D", + "sub_path": "filament/Bambu PA-CF @BBL H2D.json" + }, + { + "name": "Bambu PA-CF @BBL H2DP", + "sub_path": "filament/Bambu PA-CF @BBL H2DP.json" + }, + { + "name": "Bambu PA-CF @BBL H2S", + "sub_path": "filament/Bambu PA-CF @BBL H2S.json" + }, + { + "name": "Bambu PA-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PA-CF @BBL P1P.json" + }, + { + "name": "Bambu PA-CF @BBL P2S", + "sub_path": "filament/Bambu PA-CF @BBL P2S.json" + }, + { + "name": "Bambu PA-CF @BBL X1C", + "sub_path": "filament/Bambu PA-CF @BBL X1C.json" + }, + { + "name": "Bambu PA-CF @BBL X1E", + "sub_path": "filament/Bambu PA-CF @BBL X1E.json" + }, + { + "name": "Bambu PA-CF @BBL X2D", + "sub_path": "filament/Bambu PA-CF @BBL X2D.json" + }, + { + "name": "Bambu PA-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL A1", + "sub_path": "filament/Bambu PA6-CF @BBL A1.json" + }, + { + "name": "Bambu PA6-CF @BBL H2C", + "sub_path": "filament/Bambu PA6-CF @BBL H2C.json" + }, + { + "name": "Bambu PA6-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL H2D", + "sub_path": "filament/Bambu PA6-CF @BBL H2D.json" + }, + { + "name": "Bambu PA6-CF @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL H2DP", + "sub_path": "filament/Bambu PA6-CF @BBL H2DP.json" + }, + { + "name": "Bambu PA6-CF @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL H2S", + "sub_path": "filament/Bambu PA6-CF @BBL H2S.json" + }, + { + "name": "Bambu PA6-CF @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL P2S", + "sub_path": "filament/Bambu PA6-CF @BBL P2S.json" + }, + { + "name": "Bambu PA6-CF @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL X1C", + "sub_path": "filament/Bambu PA6-CF @BBL X1C.json" + }, + { + "name": "Bambu PA6-CF @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL X1E", + "sub_path": "filament/Bambu PA6-CF @BBL X1E.json" + }, + { + "name": "Bambu PA6-CF @BBL X2D", + "sub_path": "filament/Bambu PA6-CF @BBL X2D.json" + }, + { + "name": "Bambu PA6-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PA6-CF @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PA6-CF @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PA6-GF @BBL A1", + "sub_path": "filament/Bambu PA6-GF @BBL A1.json" + }, + { + "name": "Bambu PA6-GF @BBL H2C", + "sub_path": "filament/Bambu PA6-GF @BBL H2C.json" + }, + { + "name": "Bambu PA6-GF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PA6-GF @BBL H2D", + "sub_path": "filament/Bambu PA6-GF @BBL H2D.json" + }, + { + "name": "Bambu PA6-GF @BBL H2DP", + "sub_path": "filament/Bambu PA6-GF @BBL H2DP.json" + }, + { + "name": "Bambu PA6-GF @BBL H2S", + "sub_path": "filament/Bambu PA6-GF @BBL H2S.json" + }, + { + "name": "Bambu PA6-GF @BBL P1P", + "sub_path": "filament/Bambu PA6-GF @BBL P1P.json" + }, + { + "name": "Bambu PA6-GF @BBL P2S", + "sub_path": "filament/Bambu PA6-GF @BBL P2S.json" + }, + { + "name": "Bambu PA6-GF @BBL X1C", + "sub_path": "filament/Bambu PA6-GF @BBL X1C.json" + }, + { + "name": "Bambu PA6-GF @BBL X2D", + "sub_path": "filament/Bambu PA6-GF @BBL X2D.json" + }, + { + "name": "Bambu PA6-GF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL A1", + "sub_path": "filament/Bambu PAHT-CF @BBL A1.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2C", + "sub_path": "filament/Bambu PAHT-CF @BBL H2C.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2D", + "sub_path": "filament/Bambu PAHT-CF @BBL H2D.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2DP", + "sub_path": "filament/Bambu PAHT-CF @BBL H2DP.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2S", + "sub_path": "filament/Bambu PAHT-CF @BBL H2S.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PAHT-CF @BBL P1P.json" + }, + { + "name": "Bambu PAHT-CF @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PAHT-CF @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL P2S", + "sub_path": "filament/Bambu PAHT-CF @BBL P2S.json" + }, + { + "name": "Bambu PAHT-CF @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL X1C", + "sub_path": "filament/Bambu PAHT-CF @BBL X1C.json" + }, + { + "name": "Bambu PAHT-CF @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL X2D", + "sub_path": "filament/Bambu PAHT-CF @BBL X2D.json" + }, + { + "name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PAHT-CF @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PAHT-CF @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PA/PET @BBL A1", + "sub_path": "filament/Bambu Support For PA PET @BBL A1.json" + }, + { + "name": "Bambu Support For PA/PET @BBL H2C", + "sub_path": "filament/Bambu Support For PA PET @BBL H2C.json" + }, + { + "name": "Bambu Support For PA/PET @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu Support For PA/PET @BBL H2D", + "sub_path": "filament/Bambu Support For PA PET @BBL H2D.json" + }, + { + "name": "Bambu Support For PA/PET @BBL H2DP", + "sub_path": "filament/Bambu Support For PA PET @BBL H2DP.json" + }, + { + "name": "Bambu Support For PA/PET @BBL H2S", + "sub_path": "filament/Bambu Support For PA PET @BBL H2S.json" + }, + { + "name": "Bambu Support For PA/PET @BBL P1P", + "sub_path": "filament/P1P/Bambu Support For PA PET @BBL P1P.json" + }, + { + "name": "Bambu Support For PA/PET @BBL P2S", + "sub_path": "filament/Bambu Support For PA PET @BBL P2S.json" + }, + { + "name": "Bambu Support For PA/PET @BBL X1C", + "sub_path": "filament/Bambu Support For PA PET @BBL X1C.json" + }, + { + "name": "Bambu Support For PA/PET @BBL X2D", + "sub_path": "filament/Bambu Support For PA PET @BBL X2D.json" + }, + { + "name": "Bambu Support For PA/PET @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu Support G @BBL A1", + "sub_path": "filament/Bambu Support G @BBL A1.json" + }, + { + "name": "Bambu Support G @BBL H2C", + "sub_path": "filament/Bambu Support G @BBL H2C.json" + }, + { + "name": "Bambu Support G @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu Support G @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu Support G @BBL H2D", + "sub_path": "filament/Bambu Support G @BBL H2D.json" + }, + { + "name": "Bambu Support G @BBL H2DP", + "sub_path": "filament/Bambu Support G @BBL H2DP.json" + }, + { + "name": "Bambu Support G @BBL H2S", + "sub_path": "filament/Bambu Support G @BBL H2S.json" + }, + { + "name": "Bambu Support G @BBL P1P", + "sub_path": "filament/P1P/Bambu Support G @BBL P1P.json" + }, + { + "name": "Bambu Support G @BBL P2S", + "sub_path": "filament/Bambu Support G @BBL P2S.json" + }, + { + "name": "Bambu Support G @BBL X1C", + "sub_path": "filament/Bambu Support G @BBL X1C.json" + }, + { + "name": "Bambu Support G @BBL X1E", + "sub_path": "filament/Bambu Support G @BBL X1E.json" + }, + { + "name": "Bambu Support G @BBL X2D", + "sub_path": "filament/Bambu Support G @BBL X2D.json" + }, + { + "name": "Bambu Support G @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu Support G @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Fiberon PA12-CF @BBL H2D", + "sub_path": "filament/Polymaker/Fiberon PA12-CF @BBL H2D.json" + }, + { + "name": "Fiberon PA12-CF @BBL X1C", + "sub_path": "filament/Polymaker/Fiberon PA12-CF @BBL X1C.json" + }, + { + "name": "Fiberon PA6-CF @BBL H2D", + "sub_path": "filament/Polymaker/Fiberon PA6-CF @BBL H2D.json" + }, + { + "name": "Fiberon PA6-CF @BBL X1C", + "sub_path": "filament/Polymaker/Fiberon PA6-CF @BBL X1C.json" + }, + { + "name": "Fiberon PA6-GF @BBL H2D", + "sub_path": "filament/Polymaker/Fiberon PA6-GF @BBL H2D.json" + }, + { + "name": "Fiberon PA6-GF @BBL X1C", + "sub_path": "filament/Polymaker/Fiberon PA6-GF @BBL X1C.json" + }, + { + "name": "Fiberon PA612-CF @BBL H2D", + "sub_path": "filament/Polymaker/Fiberon PA612-CF @BBL H2D.json" + }, + { + "name": "Fiberon PA612-CF @BBL X1C", + "sub_path": "filament/Polymaker/Fiberon PA612-CF @BBL X1C.json" + }, + { + "name": "Generic PA", + "sub_path": "filament/Generic PA.json" + }, + { + "name": "Generic PA @BBL H2C", + "sub_path": "filament/Generic PA @BBL H2C.json" + }, + { + "name": "Generic PA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PA @BBL H2D", + "sub_path": "filament/Generic PA @BBL H2D.json" + }, + { + "name": "Generic PA @BBL H2DP", + "sub_path": "filament/Generic PA @BBL H2DP.json" + }, + { + "name": "Generic PA @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PA @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PA @BBL P1P", + "sub_path": "filament/P1P/Generic PA @BBL P1P.json" + }, + { + "name": "Generic PA @BBL P2S", + "sub_path": "filament/Generic PA @BBL P2S.json" + }, + { + "name": "Generic PA @BBL X2D", + "sub_path": "filament/Generic PA @BBL X2D.json" + }, + { + "name": "Generic PA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PA-CF", + "sub_path": "filament/Generic PA-CF.json" + }, + { + "name": "Generic PA-CF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PA-CF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PA-CF @BBL P1P", + "sub_path": "filament/P1P/Generic PA-CF @BBL P1P.json" + }, + { + "name": "Generic PA-CF @BBL P2S", + "sub_path": "filament/Generic PA-CF @BBL P2S.json" + }, + { + "name": "Generic PA-CF @BBL X2D", + "sub_path": "filament/Generic PA-CF @BBL X2D.json" + }, + { + "name": "Generic PA-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PC @BBL A1", + "sub_path": "filament/Bambu PC @BBL A1.json" + }, + { + "name": "Bambu PC @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2C", + "sub_path": "filament/Bambu PC @BBL H2C.json" + }, + { + "name": "Bambu PC @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PC @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PC @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2S", + "sub_path": "filament/Bambu PC @BBL H2S.json" + }, + { + "name": "Bambu PC @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PC @BBL P1P", + "sub_path": "filament/P1P/Bambu PC @BBL P1P.json" + }, + { + "name": "Bambu PC @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PC @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PC @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PC @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PC @BBL X1C", + "sub_path": "filament/Bambu PC @BBL X1C.json" + }, + { + "name": "Bambu PC @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PC @BBL X1E", + "sub_path": "filament/Bambu PC @BBL X1E.json" + }, + { + "name": "Bambu PC @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL X1E 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL X1E 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL X1E 0.8 nozzle.json" + }, + { + "name": "Bambu PC @BBL X2D", + "sub_path": "filament/Bambu PC @BBL X2D.json" + }, + { + "name": "Bambu PC @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PC @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PC @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL A1", + "sub_path": "filament/Bambu PC FR @BBL A1.json" + }, + { + "name": "Bambu PC FR @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2C", + "sub_path": "filament/Bambu PC FR @BBL H2C.json" + }, + { + "name": "Bambu PC FR @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL H2S", + "sub_path": "filament/Bambu PC FR @BBL H2S.json" + }, + { + "name": "Bambu PC FR @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL P1P", + "sub_path": "filament/Bambu PC FR @BBL P1P.json" + }, + { + "name": "Bambu PC FR @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL P1S", + "sub_path": "filament/Bambu PC FR @BBL P1S.json" + }, + { + "name": "Bambu PC FR @BBL P1S 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL P1S 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL P1S 0.6 nozzle", + "sub_path": "filament/Bambu PC FR @BBL P1S 0.6 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL P1S 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL P1S 0.8 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PC FR @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PC FR @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X1C", + "sub_path": "filament/Bambu PC FR @BBL X1C.json" + }, + { + "name": "Bambu PC FR @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X1E", + "sub_path": "filament/Bambu PC FR @BBL X1E.json" + }, + { + "name": "Bambu PC FR @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X1E 0.6 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X1E 0.6 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X1E 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X1E 0.8 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X2D", + "sub_path": "filament/Bambu PC FR @BBL X2D.json" + }, + { + "name": "Bambu PC FR @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PC FR @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PC FR @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Generic PC", + "sub_path": "filament/Generic PC.json" + }, + { + "name": "Generic PC @0.2 nozzle", + "sub_path": "filament/Generic PC @0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL A1", + "sub_path": "filament/Generic PC @BBL A1.json" + }, + { + "name": "Generic PC @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL H2C", + "sub_path": "filament/Generic PC @BBL H2C.json" + }, + { + "name": "Generic PC @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PC @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PC @BBL H2D", + "sub_path": "filament/Generic PC @BBL H2D.json" + }, + { + "name": "Generic PC @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL H2S", + "sub_path": "filament/Generic PC @BBL H2S.json" + }, + { + "name": "Generic PC @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL P1P", + "sub_path": "filament/P1P/Generic PC @BBL P1P.json" + }, + { + "name": "Generic PC @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL X2D", + "sub_path": "filament/Generic PC @BBL X2D.json" + }, + { + "name": "Generic PC @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PCTG @BBL A1", + "sub_path": "filament/Generic PCTG @BBL A1.json" + }, + { + "name": "Generic PCTG @BBL A1M", + "sub_path": "filament/Generic PCTG @BBL A1M.json" + }, + { + "name": "Generic PCTG @BBL A2L", + "sub_path": "filament/Generic PCTG @BBL A2L.json" + }, + { + "name": "Generic PCTG @BBL H2C", + "sub_path": "filament/Generic PCTG @BBL H2C.json" + }, + { + "name": "Generic PCTG @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PCTG @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PCTG @BBL H2D", + "sub_path": "filament/Generic PCTG @BBL H2D.json" + }, + { + "name": "Generic PCTG @BBL H2DP", + "sub_path": "filament/Generic PCTG @BBL H2DP.json" + }, + { + "name": "Generic PCTG @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PCTG @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PCTG @BBL P2S", + "sub_path": "filament/Generic PCTG @BBL P2S.json" + }, + { + "name": "Generic PCTG @BBL X1C", + "sub_path": "filament/Generic PCTG @BBL X1C.json" + }, + { + "name": "Generic PCTG @BBL X2D", + "sub_path": "filament/Generic PCTG @BBL X2D.json" + }, + { + "name": "Generic PCTG @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PCTG @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PE @BBL A1", + "sub_path": "filament/Generic PE @BBL A1.json" + }, + { + "name": "Generic PE @BBL A1M", + "sub_path": "filament/Generic PE @BBL A1M.json" + }, + { + "name": "Generic PE @BBL A2L", + "sub_path": "filament/Generic PE @BBL A2L.json" + }, + { + "name": "Generic PE @BBL H2C", + "sub_path": "filament/Generic PE @BBL H2C.json" + }, + { + "name": "Generic PE @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PE @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PE @BBL H2D", + "sub_path": "filament/Generic PE @BBL H2D.json" + }, + { + "name": "Generic PE @BBL H2DP", + "sub_path": "filament/Generic PE @BBL H2DP.json" + }, + { + "name": "Generic PE @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PE @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PE @BBL P2S", + "sub_path": "filament/Generic PE @BBL P2S.json" + }, + { + "name": "Generic PE @BBL X1C", + "sub_path": "filament/Generic PE @BBL X1C.json" + }, + { + "name": "Generic PE @BBL X2D", + "sub_path": "filament/Generic PE @BBL X2D.json" + }, + { + "name": "Generic PE @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PE @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PE-CF @BBL A1", + "sub_path": "filament/Generic PE-CF @BBL A1.json" + }, + { + "name": "Generic PE-CF @BBL A1M", + "sub_path": "filament/Generic PE-CF @BBL A1M.json" + }, + { + "name": "Generic PE-CF @BBL A2L", + "sub_path": "filament/Generic PE-CF @BBL A2L.json" + }, + { + "name": "Generic PE-CF @BBL H2C", + "sub_path": "filament/Generic PE-CF @BBL H2C.json" + }, + { + "name": "Generic PE-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PE-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PE-CF @BBL H2D", + "sub_path": "filament/Generic PE-CF @BBL H2D.json" + }, + { + "name": "Generic PE-CF @BBL H2DP", + "sub_path": "filament/Generic PE-CF @BBL H2DP.json" + }, + { + "name": "Generic PE-CF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PE-CF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PE-CF @BBL P2S", + "sub_path": "filament/Generic PE-CF @BBL P2S.json" + }, + { + "name": "Generic PE-CF @BBL X1C", + "sub_path": "filament/Generic PE-CF @BBL X1C.json" + }, + { + "name": "Generic PE-CF @BBL X2D", + "sub_path": "filament/Generic PE-CF @BBL X2D.json" + }, + { + "name": "Generic PE-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PE-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PET-CF @BBL A1", + "sub_path": "filament/Bambu PET-CF @BBL A1.json" + }, + { + "name": "Bambu PET-CF @BBL H2C", + "sub_path": "filament/Bambu PET-CF @BBL H2C.json" + }, + { + "name": "Bambu PET-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PET-CF @BBL H2D", + "sub_path": "filament/Bambu PET-CF @BBL H2D.json" + }, + { + "name": "Bambu PET-CF @BBL H2DP", + "sub_path": "filament/Bambu PET-CF @BBL H2DP.json" + }, + { + "name": "Bambu PET-CF @BBL H2S", + "sub_path": "filament/Bambu PET-CF @BBL H2S.json" + }, + { + "name": "Bambu PET-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PET-CF @BBL P1P.json" + }, + { + "name": "Bambu PET-CF @BBL P2S", + "sub_path": "filament/Bambu PET-CF @BBL P2S.json" + }, + { + "name": "Bambu PET-CF @BBL X1C", + "sub_path": "filament/Bambu PET-CF @BBL X1C.json" + }, + { + "name": "Bambu PET-CF @BBL X1E", + "sub_path": "filament/Bambu PET-CF @BBL X1E.json" + }, + { + "name": "Bambu PET-CF @BBL X2D", + "sub_path": "filament/Bambu PET-CF @BBL X2D.json" + }, + { + "name": "Bambu PET-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1", + "sub_path": "filament/Bambu PETG Basic @BBL A1.json" + }, + { + "name": "Bambu PETG Basic @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2C", + "sub_path": "filament/Bambu PETG Basic @BBL H2C.json" + }, + { + "name": "Bambu PETG Basic @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2S", + "sub_path": "filament/Bambu PETG Basic @BBL H2S.json" + }, + { + "name": "Bambu PETG Basic @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL X1C", + "sub_path": "filament/Bambu PETG Basic @BBL X1C.json" + }, + { + "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL X2D", + "sub_path": "filament/Bambu PETG Basic @BBL X2D.json" + }, + { + "name": "Bambu PETG Basic @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Basic @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG Basic @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL A1", + "sub_path": "filament/Bambu PETG HF @BBL A1.json" + }, + { + "name": "Bambu PETG HF @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL A1M", + "sub_path": "filament/Bambu PETG HF @BBL A1M.json" + }, + { + "name": "Bambu PETG HF @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL A2L", + "sub_path": "filament/Bambu PETG HF @BBL A2L.json" + }, + { + "name": "Bambu PETG HF @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2C", + "sub_path": "filament/Bambu PETG HF @BBL H2C.json" + }, + { + "name": "Bambu PETG HF @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2S", + "sub_path": "filament/Bambu PETG HF @BBL H2S.json" + }, + { + "name": "Bambu PETG HF @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL P1P 0.4 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL P1P 0.4 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL P1S 0.4 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL X1C", + "sub_path": "filament/Bambu PETG HF @BBL X1C.json" + }, + { + "name": "Bambu PETG HF @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL X2D", + "sub_path": "filament/Bambu PETG HF @BBL X2D.json" + }, + { + "name": "Bambu PETG HF @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG HF @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG HF @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A1", + "sub_path": "filament/Bambu PETG Matte @BBL A1.json" + }, + { + "name": "Bambu PETG Matte @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A1M 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A1M 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2C", + "sub_path": "filament/Bambu PETG Matte @BBL H2C.json" + }, + { + "name": "Bambu PETG Matte @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2S", + "sub_path": "filament/Bambu PETG Matte @BBL H2S.json" + }, + { + "name": "Bambu PETG Matte @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL P1P 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL P1P 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL X1C", + "sub_path": "filament/Bambu PETG Matte @BBL X1C.json" + }, + { + "name": "Bambu PETG Matte @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL X2D", + "sub_path": "filament/Bambu PETG Matte @BBL X2D.json" + }, + { + "name": "Bambu PETG Matte @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Matte @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG Matte @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL A1", + "sub_path": "filament/Bambu PETG Translucent @BBL A1.json" + }, + { + "name": "Bambu PETG Translucent @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL A1M", + "sub_path": "filament/Bambu PETG Translucent @BBL A1M.json" + }, + { + "name": "Bambu PETG Translucent @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL A2L", + "sub_path": "filament/Bambu PETG Translucent @BBL A2L.json" + }, + { + "name": "Bambu PETG Translucent @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2C", + "sub_path": "filament/Bambu PETG Translucent @BBL H2C.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2S", + "sub_path": "filament/Bambu PETG Translucent @BBL H2S.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL X1C", + "sub_path": "filament/Bambu PETG Translucent @BBL X1C.json" + }, + { + "name": "Bambu PETG Translucent @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL X2D", + "sub_path": "filament/Bambu PETG Translucent @BBL X2D.json" + }, + { + "name": "Bambu PETG Translucent @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG Translucent @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL A1 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL A1M", + "sub_path": "filament/Bambu PETG-CF @BBL A1M.json" + }, + { + "name": "Bambu PETG-CF @BBL A2L", + "sub_path": "filament/Bambu PETG-CF @BBL A2L.json" + }, + { + "name": "Bambu PETG-CF @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2C", + "sub_path": "filament/Bambu PETG-CF @BBL H2C.json" + }, + { + "name": "Bambu PETG-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2S", + "sub_path": "filament/Bambu PETG-CF @BBL H2S.json" + }, + { + "name": "Bambu PETG-CF @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PETG-CF @BBL P1P.json" + }, + { + "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle", + "sub_path": "filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL X1C", + "sub_path": "filament/Bambu PETG-CF @BBL X1C.json" + }, + { + "name": "Bambu PETG-CF @BBL X1C 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL X2D", + "sub_path": "filament/Bambu PETG-CF @BBL X2D.json" + }, + { + "name": "Bambu PETG-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Fiberon PET-CF @BBL H2D", + "sub_path": "filament/Polymaker/Fiberon PET-CF @BBL H2D.json" + }, + { + "name": "Fiberon PET-CF @BBL X1C", + "sub_path": "filament/Polymaker/Fiberon PET-CF @BBL X1C.json" + }, + { + "name": "Fiberon PETG-ESD @BBL H2D", + "sub_path": "filament/Polymaker/Fiberon PETG-ESD @BBL H2D.json" + }, + { + "name": "Fiberon PETG-ESD @BBL X1C", + "sub_path": "filament/Polymaker/Fiberon PETG-ESD @BBL X1C.json" + }, + { + "name": "Fiberon PETG-rCF @BBL H2D", + "sub_path": "filament/Polymaker/Fiberon PETG-rCF @BBL H2D.json" + }, + { + "name": "Fiberon PETG-rCF @BBL X1C", + "sub_path": "filament/Polymaker/Fiberon PETG-rCF @BBL X1C.json" + }, + { + "name": "Generic PETG", + "sub_path": "filament/Generic PETG.json" + }, + { + "name": "Generic PETG @0.2 nozzle", + "sub_path": "filament/Generic PETG @0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL A1", + "sub_path": "filament/Generic PETG @BBL A1.json" + }, + { + "name": "Generic PETG @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL A1M", + "sub_path": "filament/Generic PETG @BBL A1M.json" + }, + { + "name": "Generic PETG @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL A2L", + "sub_path": "filament/Generic PETG @BBL A2L.json" + }, + { + "name": "Generic PETG @BBL A2L 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL H2C", + "sub_path": "filament/Generic PETG @BBL H2C.json" + }, + { + "name": "Generic PETG @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PETG @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PETG @BBL H2D", + "sub_path": "filament/Generic PETG @BBL H2D.json" + }, + { + "name": "Generic PETG @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL H2DP", + "sub_path": "filament/Generic PETG @BBL H2DP.json" + }, + { + "name": "Generic PETG @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL H2S", + "sub_path": "filament/Generic PETG @BBL H2S.json" + }, + { + "name": "Generic PETG @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL P1P", + "sub_path": "filament/P1P/Generic PETG @BBL P1P.json" + }, + { + "name": "Generic PETG @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL P2S", + "sub_path": "filament/Generic PETG @BBL P2S.json" + }, + { + "name": "Generic PETG @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL X2D", + "sub_path": "filament/Generic PETG @BBL X2D.json" + }, + { + "name": "Generic PETG @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic PETG @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic PETG @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL A1", + "sub_path": "filament/Generic PETG HF @BBL A1.json" + }, + { + "name": "Generic PETG HF @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL A1M", + "sub_path": "filament/Generic PETG HF @BBL A1M.json" + }, + { + "name": "Generic PETG HF @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL A2L", + "sub_path": "filament/Generic PETG HF @BBL A2L.json" + }, + { + "name": "Generic PETG HF @BBL A2L 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL H2C", + "sub_path": "filament/Generic PETG HF @BBL H2C.json" + }, + { + "name": "Generic PETG HF @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PETG HF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL H2D", + "sub_path": "filament/Generic PETG HF @BBL H2D.json" + }, + { + "name": "Generic PETG HF @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL H2DP", + "sub_path": "filament/Generic PETG HF @BBL H2DP.json" + }, + { + "name": "Generic PETG HF @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PETG HF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL P1P", + "sub_path": "filament/Generic PETG HF @BBL P1P.json" + }, + { + "name": "Generic PETG HF @BBL P1P 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL P1S 0.4 nozzle", + "sub_path": "filament/Generic PETG HF @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL P1S 0.6 nozzle", + "sub_path": "filament/Generic PETG HF @BBL P1S 0.6 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL P2S", + "sub_path": "filament/Generic PETG HF @BBL P2S.json" + }, + { + "name": "Generic PETG HF @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL P2S 0.4 nozzle", + "sub_path": "filament/Generic PETG HF @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL X1 0.6 nozzle", + "sub_path": "filament/Generic PETG HF @BBL X1 0.6 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL X1C", + "sub_path": "filament/Generic PETG HF @BBL X1C.json" + }, + { + "name": "Generic PETG HF @BBL X1C 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL X2D", + "sub_path": "filament/Generic PETG HF @BBL X2D.json" + }, + { + "name": "Generic PETG HF @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic PETG HF @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic PETG HF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PETG HF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PETG-CF @BBL A1", + "sub_path": "filament/Generic PETG-CF @BBL A1.json" + }, + { + "name": "Generic PETG-CF @BBL A1M", + "sub_path": "filament/P1P/Generic PETG-CF @BBL A1M.json" + }, + { + "name": "Generic PETG-CF @BBL A2L", + "sub_path": "filament/Generic PETG-CF @BBL A2L.json" + }, + { + "name": "Generic PETG-CF @BBL H2C", + "sub_path": "filament/Generic PETG-CF @BBL H2C.json" + }, + { + "name": "Generic PETG-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PETG-CF @BBL H2D", + "sub_path": "filament/Generic PETG-CF @BBL H2D.json" + }, + { + "name": "Generic PETG-CF @BBL H2DP", + "sub_path": "filament/Generic PETG-CF @BBL H2DP.json" + }, + { + "name": "Generic PETG-CF @BBL H2S", + "sub_path": "filament/Generic PETG-CF @BBL H2S.json" + }, + { + "name": "Generic PETG-CF @BBL P1P", + "sub_path": "filament/P1P/Generic PETG-CF @BBL P1P.json" + }, + { + "name": "Generic PETG-CF @BBL P2S", + "sub_path": "filament/Generic PETG-CF @BBL P2S.json" + }, + { + "name": "Generic PETG-CF @BBL X1C", + "sub_path": "filament/Generic PETG-CF @BBL X1C.json" + }, + { + "name": "Generic PETG-CF @BBL X2D", + "sub_path": "filament/Generic PETG-CF @BBL X2D.json" + }, + { + "name": "Generic PETG-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL A1", + "sub_path": "filament/PolyLite PETG @BBL A1.json" + }, + { + "name": "PolyLite PETG @BBL A1 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL A1 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL A1M", + "sub_path": "filament/PolyLite PETG @BBL A1M.json" + }, + { + "name": "PolyLite PETG @BBL H2D", + "sub_path": "filament/PolyLite PETG @BBL H2D.json" + }, + { + "name": "PolyLite PETG @BBL H2D 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL H2D 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL H2DP", + "sub_path": "filament/PolyLite PETG @BBL H2DP.json" + }, + { + "name": "PolyLite PETG @BBL H2DP 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL H2S", + "sub_path": "filament/PolyLite PETG @BBL H2S.json" + }, + { + "name": "PolyLite PETG @BBL H2S 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL H2S 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL P1P", + "sub_path": "filament/PolyLite PETG @BBL P1P.json" + }, + { + "name": "PolyLite PETG @BBL X1C", + "sub_path": "filament/PolyLite PETG @BBL X1C.json" + }, + { + "name": "SUNLU PETG @BBL A1", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1.json" + }, + { + "name": "SUNLU PETG @BBL A1 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json" + }, + { + "name": "SUNLU PETG @BBL A1 0.8 nozzle", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json" + }, + { + "name": "SUNLU PETG @BBL A1M 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json" + }, + { + "name": "SUNLU PETG @BBL A1M 0.4 nozzle", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M.json" + }, + { + "name": "SUNLU PETG @BBL A1M 0.8 nozzle", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json" + }, + { + "name": "SUNLU PETG @BBL X1C", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL X1C.json" + }, + { + "name": "SUNLU PETG @BBL X1C 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json" + }, + { + "name": "SUNLU PETG @BBL X1C 0.8 nozzle", + "sub_path": "filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Generic PHA @BBL A1", + "sub_path": "filament/Generic PHA @BBL A1.json" + }, + { + "name": "Generic PHA @BBL A1M", + "sub_path": "filament/Generic PHA @BBL A1M.json" + }, + { + "name": "Generic PHA @BBL A2L", + "sub_path": "filament/Generic PHA @BBL A2L.json" + }, + { + "name": "Generic PHA @BBL H2C", + "sub_path": "filament/Generic PHA @BBL H2C.json" + }, + { + "name": "Generic PHA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PHA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PHA @BBL H2D", + "sub_path": "filament/Generic PHA @BBL H2D.json" + }, + { + "name": "Generic PHA @BBL H2DP", + "sub_path": "filament/Generic PHA @BBL H2DP.json" + }, + { + "name": "Generic PHA @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PHA @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PHA @BBL P2S", + "sub_path": "filament/Generic PHA @BBL P2S.json" + }, + { + "name": "Generic PHA @BBL X1C", + "sub_path": "filament/Generic PHA @BBL X1C.json" + }, + { + "name": "Generic PHA @BBL X2D", + "sub_path": "filament/Generic PHA @BBL X2D.json" + }, + { + "name": "Generic PHA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PHA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Aero @BBL A1", + "sub_path": "filament/Bambu PLA Aero @BBL A1.json" + }, + { + "name": "Bambu PLA Aero @BBL A1M", + "sub_path": "filament/Bambu PLA Aero @BBL A1M.json" + }, + { + "name": "Bambu PLA Aero @BBL A2L", + "sub_path": "filament/Bambu PLA Aero @BBL A2L.json" + }, + { + "name": "Bambu PLA Aero @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Aero @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Aero @BBL H2C", + "sub_path": "filament/Bambu PLA Aero @BBL H2C.json" + }, + { + "name": "Bambu PLA Aero @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Aero @BBL H2D", + "sub_path": "filament/Bambu PLA Aero @BBL H2D.json" + }, + { + "name": "Bambu PLA Aero @BBL H2DP", + "sub_path": "filament/Bambu PLA Aero @BBL H2DP.json" + }, + { + "name": "Bambu PLA Aero @BBL H2S", + "sub_path": "filament/Bambu PLA Aero @BBL H2S.json" + }, + { + "name": "Bambu PLA Aero @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Aero @BBL P1P.json" + }, + { + "name": "Bambu PLA Aero @BBL P2S", + "sub_path": "filament/Bambu PLA Aero @BBL P2S.json" + }, + { + "name": "Bambu PLA Aero @BBL X1", + "sub_path": "filament/Bambu PLA Aero @BBL X1.json" + }, + { + "name": "Bambu PLA Aero @BBL X1C", + "sub_path": "filament/Bambu PLA Aero @BBL X1C.json" + }, + { + "name": "Bambu PLA Aero @BBL X2D", + "sub_path": "filament/Bambu PLA Aero @BBL X2D.json" + }, + { + "name": "Bambu PLA Aero @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL A1", + "sub_path": "filament/Bambu PLA Basic @BBL A1.json" + }, + { + "name": "Bambu PLA Basic @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL A1M", + "sub_path": "filament/Bambu PLA Basic @BBL A1M.json" + }, + { + "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2C", + "sub_path": "filament/Bambu PLA Basic @BBL H2C.json" + }, + { + "name": "Bambu PLA Basic @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2D", + "sub_path": "filament/Bambu PLA Basic @BBL H2D.json" + }, + { + "name": "Bambu PLA Basic @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2DP", + "sub_path": "filament/Bambu PLA Basic @BBL H2DP.json" + }, + { + "name": "Bambu PLA Basic @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2S", + "sub_path": "filament/Bambu PLA Basic @BBL H2S.json" + }, + { + "name": "Bambu PLA Basic @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P.json" + }, + { + "name": "Bambu PLA Basic @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL P1S 0.4 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL P1S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL P1S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL P2S", + "sub_path": "filament/Bambu PLA Basic @BBL P2S.json" + }, + { + "name": "Bambu PLA Basic @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL X1", + "sub_path": "filament/Bambu PLA Basic @BBL X1.json" + }, + { + "name": "Bambu PLA Basic @BBL X1C", + "sub_path": "filament/Bambu PLA Basic @BBL X1C.json" + }, + { + "name": "Bambu PLA Basic @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL X2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL X2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Basic @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Basic @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A1", + "sub_path": "filament/Bambu PLA Dynamic @BBL A1.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A1M", + "sub_path": "filament/Bambu PLA Dynamic @BBL A1M.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A2L", + "sub_path": "filament/Bambu PLA Dynamic @BBL A2L.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2C", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2C.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2D", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2D.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2DP", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2DP.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2S", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2S.json" + }, + { + "name": "Bambu PLA Dynamic @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL P1P", + "sub_path": "filament/Bambu PLA Dynamic @BBL P1P.json" + }, + { + "name": "Bambu PLA Dynamic @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL P2S", + "sub_path": "filament/Bambu PLA Dynamic @BBL P2S.json" + }, + { + "name": "Bambu PLA Dynamic @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL X1C", + "sub_path": "filament/Bambu PLA Dynamic @BBL X1C.json" + }, + { + "name": "Bambu PLA Dynamic @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL X2D", + "sub_path": "filament/Bambu PLA Dynamic @BBL X2D.json" + }, + { + "name": "Bambu PLA Dynamic @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Dynamic @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A1", + "sub_path": "filament/Bambu PLA Galaxy @BBL A1.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A1M", + "sub_path": "filament/Bambu PLA Galaxy @BBL A1M.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A2L", + "sub_path": "filament/Bambu PLA Galaxy @BBL A2L.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2C", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2C.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2D", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2D.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2DP", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2DP.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2S", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2S.json" + }, + { + "name": "Bambu PLA Galaxy @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL P1P", + "sub_path": "filament/Bambu PLA Galaxy @BBL P1P.json" + }, + { + "name": "Bambu PLA Galaxy @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL P2S", + "sub_path": "filament/Bambu PLA Galaxy @BBL P2S.json" + }, + { + "name": "Bambu PLA Galaxy @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL X1C", + "sub_path": "filament/Bambu PLA Galaxy @BBL X1C.json" + }, + { + "name": "Bambu PLA Galaxy @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL X2D", + "sub_path": "filament/Bambu PLA Galaxy @BBL X2D.json" + }, + { + "name": "Bambu PLA Galaxy @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Galaxy @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL A1", + "sub_path": "filament/Bambu PLA Glow @BBL A1.json" + }, + { + "name": "Bambu PLA Glow @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL A1M", + "sub_path": "filament/Bambu PLA Glow @BBL A1M.json" + }, + { + "name": "Bambu PLA Glow @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL H2C", + "sub_path": "filament/Bambu PLA Glow @BBL H2C.json" + }, + { + "name": "Bambu PLA Glow @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL H2D", + "sub_path": "filament/Bambu PLA Glow @BBL H2D.json" + }, + { + "name": "Bambu PLA Glow @BBL H2DP", + "sub_path": "filament/Bambu PLA Glow @BBL H2DP.json" + }, + { + "name": "Bambu PLA Glow @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL H2S", + "sub_path": "filament/Bambu PLA Glow @BBL H2S.json" + }, + { + "name": "Bambu PLA Glow @BBL P1P", + "sub_path": "filament/Bambu PLA Glow @BBL P1P.json" + }, + { + "name": "Bambu PLA Glow @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL P2S", + "sub_path": "filament/Bambu PLA Glow @BBL P2S.json" + }, + { + "name": "Bambu PLA Glow @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL X1", + "sub_path": "filament/Bambu PLA Glow @BBL X1.json" + }, + { + "name": "Bambu PLA Glow @BBL X1C", + "sub_path": "filament/Bambu PLA Glow @BBL X1C.json" + }, + { + "name": "Bambu PLA Glow @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL X1E", + "sub_path": "filament/Bambu PLA Glow @BBL X1E.json" + }, + { + "name": "Bambu PLA Glow @BBL X2D", + "sub_path": "filament/Bambu PLA Glow @BBL X2D.json" + }, + { + "name": "Bambu PLA Glow @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL A1", + "sub_path": "filament/Bambu PLA Lite @BBL A1.json" + }, + { + "name": "Bambu PLA Lite @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL A1M", + "sub_path": "filament/Bambu PLA Lite @BBL A1M.json" + }, + { + "name": "Bambu PLA Lite @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2C", + "sub_path": "filament/Bambu PLA Lite @BBL H2C.json" + }, + { + "name": "Bambu PLA Lite @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2D", + "sub_path": "filament/Bambu PLA Lite @BBL H2D.json" + }, + { + "name": "Bambu PLA Lite @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2S", + "sub_path": "filament/Bambu PLA Lite @BBL H2S.json" + }, + { + "name": "Bambu PLA Lite @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL P1P", + "sub_path": "filament/Bambu PLA Lite @BBL P1P.json" + }, + { + "name": "Bambu PLA Lite @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL X1C", + "sub_path": "filament/Bambu PLA Lite @BBL X1C.json" + }, + { + "name": "Bambu PLA Lite @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL X2D", + "sub_path": "filament/Bambu PLA Lite @BBL X2D.json" + }, + { + "name": "Bambu PLA Lite @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Lite @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Lite @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Marble @BBL A1", + "sub_path": "filament/Bambu PLA Marble @BBL A1.json" + }, + { + "name": "Bambu PLA Marble @BBL A1M", + "sub_path": "filament/Bambu PLA Marble @BBL A1M.json" + }, + { + "name": "Bambu PLA Marble @BBL A2L", + "sub_path": "filament/Bambu PLA Marble @BBL A2L.json" + }, + { + "name": "Bambu PLA Marble @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Marble @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Marble @BBL H2C", + "sub_path": "filament/Bambu PLA Marble @BBL H2C.json" + }, + { + "name": "Bambu PLA Marble @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Marble @BBL H2D", + "sub_path": "filament/Bambu PLA Marble @BBL H2D.json" + }, + { + "name": "Bambu PLA Marble @BBL H2DP", + "sub_path": "filament/Bambu PLA Marble @BBL H2DP.json" + }, + { + "name": "Bambu PLA Marble @BBL H2S", + "sub_path": "filament/Bambu PLA Marble @BBL H2S.json" + }, + { + "name": "Bambu PLA Marble @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Marble @BBL P1P.json" + }, + { + "name": "Bambu PLA Marble @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PLA Marble @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Marble @BBL P2S", + "sub_path": "filament/Bambu PLA Marble @BBL P2S.json" + }, + { + "name": "Bambu PLA Marble @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Marble @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Marble @BBL X1", + "sub_path": "filament/Bambu PLA Marble @BBL X1.json" + }, + { + "name": "Bambu PLA Marble @BBL X1C", + "sub_path": "filament/Bambu PLA Marble @BBL X1C.json" + }, + { + "name": "Bambu PLA Marble @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Marble @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Marble @BBL X2D", + "sub_path": "filament/Bambu PLA Marble @BBL X2D.json" + }, + { + "name": "Bambu PLA Marble @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL A1", + "sub_path": "filament/Bambu PLA Matte @BBL A1.json" + }, + { + "name": "Bambu PLA Matte @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL A1M", + "sub_path": "filament/Bambu PLA Matte @BBL A1M.json" + }, + { + "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2C", + "sub_path": "filament/Bambu PLA Matte @BBL H2C.json" + }, + { + "name": "Bambu PLA Matte @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2D", + "sub_path": "filament/Bambu PLA Matte @BBL H2D.json" + }, + { + "name": "Bambu PLA Matte @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2DP", + "sub_path": "filament/Bambu PLA Matte @BBL H2DP.json" + }, + { + "name": "Bambu PLA Matte @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2S", + "sub_path": "filament/Bambu PLA Matte @BBL H2S.json" + }, + { + "name": "Bambu PLA Matte @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P.json" + }, + { + "name": "Bambu PLA Matte @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL P1S 0.4 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL P1S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL P1S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL P2S", + "sub_path": "filament/Bambu PLA Matte @BBL P2S.json" + }, + { + "name": "Bambu PLA Matte @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL X1", + "sub_path": "filament/Bambu PLA Matte @BBL X1.json" + }, + { + "name": "Bambu PLA Matte @BBL X1C", + "sub_path": "filament/Bambu PLA Matte @BBL X1C.json" + }, + { + "name": "Bambu PLA Matte @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL X2D", + "sub_path": "filament/Bambu PLA Matte @BBL X2D.json" + }, + { + "name": "Bambu PLA Matte @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Matte @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Matte @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL A1", + "sub_path": "filament/Bambu PLA Metal @BBL A1.json" + }, + { + "name": "Bambu PLA Metal @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL A1M", + "sub_path": "filament/Bambu PLA Metal @BBL A1M.json" + }, + { + "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL A2L", + "sub_path": "filament/Bambu PLA Metal @BBL A2L.json" + }, + { + "name": "Bambu PLA Metal @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL H2C", + "sub_path": "filament/Bambu PLA Metal @BBL H2C.json" + }, + { + "name": "Bambu PLA Metal @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL H2D", + "sub_path": "filament/Bambu PLA Metal @BBL H2D.json" + }, + { + "name": "Bambu PLA Metal @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL H2DP", + "sub_path": "filament/Bambu PLA Metal @BBL H2DP.json" + }, + { + "name": "Bambu PLA Metal @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL H2S", + "sub_path": "filament/Bambu PLA Metal @BBL H2S.json" + }, + { + "name": "Bambu PLA Metal @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P.json" + }, + { + "name": "Bambu PLA Metal @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL P2S", + "sub_path": "filament/Bambu PLA Metal @BBL P2S.json" + }, + { + "name": "Bambu PLA Metal @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL X1", + "sub_path": "filament/Bambu PLA Metal @BBL X1.json" + }, + { + "name": "Bambu PLA Metal @BBL X1C", + "sub_path": "filament/Bambu PLA Metal @BBL X1C.json" + }, + { + "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL X2D", + "sub_path": "filament/Bambu PLA Metal @BBL X2D.json" + }, + { + "name": "Bambu PLA Metal @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Metal @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL A1", + "sub_path": "filament/Bambu PLA Pure @BBL A1.json" + }, + { + "name": "Bambu PLA Pure @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL A1M", + "sub_path": "filament/Bambu PLA Pure @BBL A1M.json" + }, + { + "name": "Bambu PLA Pure @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL A2L", + "sub_path": "filament/Bambu PLA Pure @BBL A2L.json" + }, + { + "name": "Bambu PLA Pure @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2C", + "sub_path": "filament/Bambu PLA Pure @BBL H2C.json" + }, + { + "name": "Bambu PLA Pure @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2D", + "sub_path": "filament/Bambu PLA Pure @BBL H2D.json" + }, + { + "name": "Bambu PLA Pure @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2DP", + "sub_path": "filament/Bambu PLA Pure @BBL H2DP.json" + }, + { + "name": "Bambu PLA Pure @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2S", + "sub_path": "filament/Bambu PLA Pure @BBL H2S.json" + }, + { + "name": "Bambu PLA Pure @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL P1P", + "sub_path": "filament/Bambu PLA Pure @BBL P1P.json" + }, + { + "name": "Bambu PLA Pure @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL P1P 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL P1P 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL X1C", + "sub_path": "filament/Bambu PLA Pure @BBL X1C.json" + }, + { + "name": "Bambu PLA Pure @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL X2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL X2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Pure @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Pure @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL A1", + "sub_path": "filament/Bambu PLA Silk @BBL A1.json" + }, + { + "name": "Bambu PLA Silk @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL A1M", + "sub_path": "filament/Bambu PLA Silk @BBL A1M.json" + }, + { + "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL H2C", + "sub_path": "filament/Bambu PLA Silk @BBL H2C.json" + }, + { + "name": "Bambu PLA Silk @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL H2D", + "sub_path": "filament/Bambu PLA Silk @BBL H2D.json" + }, + { + "name": "Bambu PLA Silk @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL H2DP", + "sub_path": "filament/Bambu PLA Silk @BBL H2DP.json" + }, + { + "name": "Bambu PLA Silk @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL H2S", + "sub_path": "filament/Bambu PLA Silk @BBL H2S.json" + }, + { + "name": "Bambu PLA Silk @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Silk @BBL P1P.json" + }, + { + "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL P2S", + "sub_path": "filament/Bambu PLA Silk @BBL P2S.json" + }, + { + "name": "Bambu PLA Silk @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL X1", + "sub_path": "filament/Bambu PLA Silk @BBL X1.json" + }, + { + "name": "Bambu PLA Silk @BBL X1C", + "sub_path": "filament/Bambu PLA Silk @BBL X1C.json" + }, + { + "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL X2D", + "sub_path": "filament/Bambu PLA Silk @BBL X2D.json" + }, + { + "name": "Bambu PLA Silk @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A1", + "sub_path": "filament/Bambu PLA Silk+ @BBL A1.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A1M", + "sub_path": "filament/Bambu PLA Silk+ @BBL A1M.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2C", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2C.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2D", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2D.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2DP", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2DP.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2S", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2S.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P1P", + "sub_path": "filament/Bambu PLA Silk+ @BBL P1P.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P1S 0.4 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL P1S 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P1S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL P1S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P2S", + "sub_path": "filament/Bambu PLA Silk+ @BBL P2S.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X1", + "sub_path": "filament/Bambu PLA Silk+ @BBL X1.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X1C", + "sub_path": "filament/Bambu PLA Silk+ @BBL X1C.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X2D", + "sub_path": "filament/Bambu PLA Silk+ @BBL X2D.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Silk+ @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL A1", + "sub_path": "filament/Bambu PLA Sparkle @BBL A1.json" + }, + { + "name": "Bambu PLA Sparkle @BBL A1M", + "sub_path": "filament/Bambu PLA Sparkle @BBL A1M.json" + }, + { + "name": "Bambu PLA Sparkle @BBL A2L", + "sub_path": "filament/Bambu PLA Sparkle @BBL A2L.json" + }, + { + "name": "Bambu PLA Sparkle @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL H2C", + "sub_path": "filament/Bambu PLA Sparkle @BBL H2C.json" + }, + { + "name": "Bambu PLA Sparkle @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL H2D", + "sub_path": "filament/Bambu PLA Sparkle @BBL H2D.json" + }, + { + "name": "Bambu PLA Sparkle @BBL H2DP", + "sub_path": "filament/Bambu PLA Sparkle @BBL H2DP.json" + }, + { + "name": "Bambu PLA Sparkle @BBL H2S", + "sub_path": "filament/Bambu PLA Sparkle @BBL H2S.json" + }, + { + "name": "Bambu PLA Sparkle @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Sparkle @BBL P1P.json" + }, + { + "name": "Bambu PLA Sparkle @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PLA Sparkle @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL P2S", + "sub_path": "filament/Bambu PLA Sparkle @BBL P2S.json" + }, + { + "name": "Bambu PLA Sparkle @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Sparkle @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Sparkle @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL X1", + "sub_path": "filament/Bambu PLA Sparkle @BBL X1.json" + }, + { + "name": "Bambu PLA Sparkle @BBL X1C", + "sub_path": "filament/Bambu PLA Sparkle @BBL X1C.json" + }, + { + "name": "Bambu PLA Sparkle @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Sparkle @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Sparkle @BBL X2D", + "sub_path": "filament/Bambu PLA Sparkle @BBL X2D.json" + }, + { + "name": "Bambu PLA Sparkle @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL A1", + "sub_path": "filament/Bambu PLA Tough @BBL A1.json" + }, + { + "name": "Bambu PLA Tough @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL A1M", + "sub_path": "filament/Bambu PLA Tough @BBL A1M.json" + }, + { + "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL A2L", + "sub_path": "filament/Bambu PLA Tough @BBL A2L.json" + }, + { + "name": "Bambu PLA Tough @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL H2C", + "sub_path": "filament/Bambu PLA Tough @BBL H2C.json" + }, + { + "name": "Bambu PLA Tough @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL H2D", + "sub_path": "filament/Bambu PLA Tough @BBL H2D.json" + }, + { + "name": "Bambu PLA Tough @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL H2DP", + "sub_path": "filament/Bambu PLA Tough @BBL H2DP.json" + }, + { + "name": "Bambu PLA Tough @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL H2S", + "sub_path": "filament/Bambu PLA Tough @BBL H2S.json" + }, + { + "name": "Bambu PLA Tough @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P.json" + }, + { + "name": "Bambu PLA Tough @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL P2S", + "sub_path": "filament/Bambu PLA Tough @BBL P2S.json" + }, + { + "name": "Bambu PLA Tough @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL X1", + "sub_path": "filament/Bambu PLA Tough @BBL X1.json" + }, + { + "name": "Bambu PLA Tough @BBL X1C", + "sub_path": "filament/Bambu PLA Tough @BBL X1C.json" + }, + { + "name": "Bambu PLA Tough @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL X2D", + "sub_path": "filament/Bambu PLA Tough @BBL X2D.json" + }, + { + "name": "Bambu PLA Tough @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A1", + "sub_path": "filament/Bambu PLA Tough+ @BBL A1.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A1M", + "sub_path": "filament/Bambu PLA Tough+ @BBL A1M.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A2L 0.4 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2C", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2C.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2D", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2D.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2DP", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2S", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2S.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA Tough+ @BBL P1P.json" + }, + { + "name": "Bambu PLA Tough+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL P1P 0.6 nozzle", + "sub_path": "filament/P1P/Bambu PLA Tough+ @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL P2S", + "sub_path": "filament/Bambu PLA Tough+ @BBL P2S.json" + }, + { + "name": "Bambu PLA Tough+ @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X1", + "sub_path": "filament/Bambu PLA Tough+ @BBL X1.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X1C", + "sub_path": "filament/Bambu PLA Tough+ @BBL X1C.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X2D", + "sub_path": "filament/Bambu PLA Tough+ @BBL X2D.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Tough+ @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL A1", + "sub_path": "filament/Bambu PLA Translucent @BBL A1.json" + }, + { + "name": "Bambu PLA Translucent @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL A1M", + "sub_path": "filament/Bambu PLA Translucent @BBL A1M.json" + }, + { + "name": "Bambu PLA Translucent @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL A2L", + "sub_path": "filament/Bambu PLA Translucent @BBL A2L.json" + }, + { + "name": "Bambu PLA Translucent @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2C", + "sub_path": "filament/Bambu PLA Translucent @BBL H2C.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2D", + "sub_path": "filament/Bambu PLA Translucent @BBL H2D.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2DP", + "sub_path": "filament/Bambu PLA Translucent @BBL H2DP.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2S", + "sub_path": "filament/Bambu PLA Translucent @BBL H2S.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL P1P", + "sub_path": "filament/Bambu PLA Translucent @BBL P1P.json" + }, + { + "name": "Bambu PLA Translucent @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL P1P 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL P1P 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL X1C", + "sub_path": "filament/Bambu PLA Translucent @BBL X1C.json" + }, + { + "name": "Bambu PLA Translucent @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL X2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Translucent @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL A1", + "sub_path": "filament/Bambu PLA Wood @BBL A1.json" + }, + { + "name": "Bambu PLA Wood @BBL A1M", + "sub_path": "filament/Bambu PLA Wood @BBL A1M.json" + }, + { + "name": "Bambu PLA Wood @BBL A2L", + "sub_path": "filament/Bambu PLA Wood @BBL A2L.json" + }, + { + "name": "Bambu PLA Wood @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL H2C", + "sub_path": "filament/Bambu PLA Wood @BBL H2C.json" + }, + { + "name": "Bambu PLA Wood @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL H2D", + "sub_path": "filament/Bambu PLA Wood @BBL H2D.json" + }, + { + "name": "Bambu PLA Wood @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL H2DP", + "sub_path": "filament/Bambu PLA Wood @BBL H2DP.json" + }, + { + "name": "Bambu PLA Wood @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL H2S", + "sub_path": "filament/Bambu PLA Wood @BBL H2S.json" + }, + { + "name": "Bambu PLA Wood @BBL P1P", + "sub_path": "filament/Bambu PLA Wood @BBL P1P.json" + }, + { + "name": "Bambu PLA Wood @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL P2S", + "sub_path": "filament/Bambu PLA Wood @BBL P2S.json" + }, + { + "name": "Bambu PLA Wood @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL X1", + "sub_path": "filament/Bambu PLA Wood @BBL X1.json" + }, + { + "name": "Bambu PLA Wood @BBL X1C", + "sub_path": "filament/Bambu PLA Wood @BBL X1C.json" + }, + { + "name": "Bambu PLA Wood @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA Wood @BBL X2D", + "sub_path": "filament/Bambu PLA Wood @BBL X2D.json" + }, + { + "name": "Bambu PLA Wood @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL A1", + "sub_path": "filament/Bambu PLA-CF @BBL A1.json" + }, + { + "name": "Bambu PLA-CF @BBL A1 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL A1M", + "sub_path": "filament/Bambu PLA-CF @BBL A1M.json" + }, + { + "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL A2L", + "sub_path": "filament/Bambu PLA-CF @BBL A2L.json" + }, + { + "name": "Bambu PLA-CF @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2C", + "sub_path": "filament/Bambu PLA-CF @BBL H2C.json" + }, + { + "name": "Bambu PLA-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2S", + "sub_path": "filament/Bambu PLA-CF @BBL H2S.json" + }, + { + "name": "Bambu PLA-CF @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL P1P", + "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P.json" + }, + { + "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle", + "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL P2S 0.4 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL P2S 0.4 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL X1C", + "sub_path": "filament/Bambu PLA-CF @BBL X1C.json" + }, + { + "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL X2D", + "sub_path": "filament/Bambu PLA-CF @BBL X2D.json" + }, + { + "name": "Bambu PLA-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PLA-CF @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PLA-CF @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL A1", + "sub_path": "filament/Bambu Support For PLA @BBL A1.json" + }, + { + "name": "Bambu Support For PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL A1M", + "sub_path": "filament/Bambu Support For PLA @BBL A1M.json" + }, + { + "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL A2L", + "sub_path": "filament/Bambu Support For PLA @BBL A2L.json" + }, + { + "name": "Bambu Support For PLA @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2C", + "sub_path": "filament/Bambu Support For PLA @BBL H2C.json" + }, + { + "name": "Bambu Support For PLA @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2D", + "sub_path": "filament/Bambu Support For PLA @BBL H2D.json" + }, + { + "name": "Bambu Support For PLA @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2DP", + "sub_path": "filament/Bambu Support For PLA @BBL H2DP.json" + }, + { + "name": "Bambu Support For PLA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2S", + "sub_path": "filament/Bambu Support For PLA @BBL H2S.json" + }, + { + "name": "Bambu Support For PLA @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL P1P", + "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P.json" + }, + { + "name": "Bambu Support For PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL P2S", + "sub_path": "filament/Bambu Support For PLA @BBL P2S.json" + }, + { + "name": "Bambu Support For PLA @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL X1C", + "sub_path": "filament/Bambu Support For PLA @BBL X1C.json" + }, + { + "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL X2D", + "sub_path": "filament/Bambu Support For PLA @BBL X2D.json" + }, + { + "name": "Bambu Support For PLA @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu Support For PLA @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL A1", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL A1M", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1M.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL A2L", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2C", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2D", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2DP", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2DP.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2S", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2S.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL P1P", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL P1P.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL P2S", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL P2S.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL X1C", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL X1C.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL X2D", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu Support For PLA/PETG @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu Support W @BBL A1", + "sub_path": "filament/Bambu Support W @BBL A1.json" + }, + { + "name": "Bambu Support W @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL A1M", + "sub_path": "filament/Bambu Support W @BBL A1M.json" + }, + { + "name": "Bambu Support W @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL A2L", + "sub_path": "filament/Bambu Support W @BBL A2L.json" + }, + { + "name": "Bambu Support W @BBL A2L 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL H2C", + "sub_path": "filament/Bambu Support W @BBL H2C.json" + }, + { + "name": "Bambu Support W @BBL H2C 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu Support W @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu Support W @BBL H2D", + "sub_path": "filament/Bambu Support W @BBL H2D.json" + }, + { + "name": "Bambu Support W @BBL H2D 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL H2DP", + "sub_path": "filament/Bambu Support W @BBL H2DP.json" + }, + { + "name": "Bambu Support W @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL H2S", + "sub_path": "filament/Bambu Support W @BBL H2S.json" + }, + { + "name": "Bambu Support W @BBL H2S 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL P1P", + "sub_path": "filament/P1P/Bambu Support W @BBL P1P.json" + }, + { + "name": "Bambu Support W @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL P2S", + "sub_path": "filament/Bambu Support W @BBL P2S.json" + }, + { + "name": "Bambu Support W @BBL P2S 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL X1", + "sub_path": "filament/Bambu Support W @BBL X1.json" + }, + { + "name": "Bambu Support W @BBL X1C", + "sub_path": "filament/Bambu Support W @BBL X1C.json" + }, + { + "name": "Bambu Support W @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL X2D", + "sub_path": "filament/Bambu Support W @BBL X2D.json" + }, + { + "name": "Bambu Support W @BBL X2D 0.2 nozzle", + "sub_path": "filament/Bambu Support W @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Bambu Support W @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu Support W @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PLA", + "sub_path": "filament/Generic PLA.json" + }, + { + "name": "Generic PLA @0.2 nozzle", + "sub_path": "filament/Generic PLA @0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL A1", + "sub_path": "filament/Generic PLA @BBL A1.json" + }, + { + "name": "Generic PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL A1M", + "sub_path": "filament/Generic PLA @BBL A1M.json" + }, + { + "name": "Generic PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL A2L", + "sub_path": "filament/Generic PLA @BBL A2L.json" + }, + { + "name": "Generic PLA @BBL A2L 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL H2C", + "sub_path": "filament/Generic PLA @BBL H2C.json" + }, + { + "name": "Generic PLA @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PLA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PLA @BBL H2D", + "sub_path": "filament/Generic PLA @BBL H2D.json" + }, + { + "name": "Generic PLA @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL H2DP", + "sub_path": "filament/Generic PLA @BBL H2DP.json" + }, + { + "name": "Generic PLA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL H2S", + "sub_path": "filament/Generic PLA @BBL H2S.json" + }, + { + "name": "Generic PLA @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL P1P", + "sub_path": "filament/P1P/Generic PLA @BBL P1P.json" + }, + { + "name": "Generic PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL P2S", + "sub_path": "filament/Generic PLA @BBL P2S.json" + }, + { + "name": "Generic PLA @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL X2D", + "sub_path": "filament/Generic PLA @BBL X2D.json" + }, + { + "name": "Generic PLA @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic PLA @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic PLA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL A1", + "sub_path": "filament/Generic PLA High Speed @BBL A1.json" + }, + { + "name": "Generic PLA High Speed @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL A1M", + "sub_path": "filament/Generic PLA High Speed @BBL A1M.json" + }, + { + "name": "Generic PLA High Speed @BBL A2L", + "sub_path": "filament/Generic PLA High Speed @BBL A2L.json" + }, + { + "name": "Generic PLA High Speed @BBL A2L 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL H2C", + "sub_path": "filament/Generic PLA High Speed @BBL H2C.json" + }, + { + "name": "Generic PLA High Speed @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL H2D", + "sub_path": "filament/Generic PLA High Speed @BBL H2D.json" + }, + { + "name": "Generic PLA High Speed @BBL H2D 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL H2DP", + "sub_path": "filament/Generic PLA High Speed @BBL H2DP.json" + }, + { + "name": "Generic PLA High Speed @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL H2S", + "sub_path": "filament/Generic PLA High Speed @BBL H2S.json" + }, + { + "name": "Generic PLA High Speed @BBL H2S 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL P1P", + "sub_path": "filament/Generic PLA High Speed @BBL P1P.json" + }, + { + "name": "Generic PLA High Speed @BBL P2S", + "sub_path": "filament/Generic PLA High Speed @BBL P2S.json" + }, + { + "name": "Generic PLA High Speed @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL X1C", + "sub_path": "filament/Generic PLA High Speed @BBL X1C.json" + }, + { + "name": "Generic PLA High Speed @BBL X2D", + "sub_path": "filament/Generic PLA High Speed @BBL X2D.json" + }, + { + "name": "Generic PLA High Speed @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PLA Silk", + "sub_path": "filament/Generic PLA Silk.json" + }, + { + "name": "Generic PLA Silk @BBL A1", + "sub_path": "filament/Generic PLA Silk @BBL A1.json" + }, + { + "name": "Generic PLA Silk @BBL A1M", + "sub_path": "filament/Generic PLA Silk @BBL A1M.json" + }, + { + "name": "Generic PLA Silk @BBL A2L", + "sub_path": "filament/Generic PLA Silk @BBL A2L.json" + }, + { + "name": "Generic PLA Silk @BBL H2C", + "sub_path": "filament/Generic PLA Silk @BBL H2C.json" + }, + { + "name": "Generic PLA Silk @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PLA Silk @BBL H2D", + "sub_path": "filament/Generic PLA Silk @BBL H2D.json" + }, + { + "name": "Generic PLA Silk @BBL H2DP", + "sub_path": "filament/Generic PLA Silk @BBL H2DP.json" + }, + { + "name": "Generic PLA Silk @BBL H2S", + "sub_path": "filament/Generic PLA Silk @BBL H2S.json" + }, + { + "name": "Generic PLA Silk @BBL P1P", + "sub_path": "filament/P1P/Generic PLA Silk @BBL P1P.json" + }, + { + "name": "Generic PLA Silk @BBL P2S", + "sub_path": "filament/Generic PLA Silk @BBL P2S.json" + }, + { + "name": "Generic PLA Silk @BBL X2D", + "sub_path": "filament/Generic PLA Silk @BBL X2D.json" + }, + { + "name": "Generic PLA Silk @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PLA-CF", + "sub_path": "filament/Generic PLA-CF.json" + }, + { + "name": "Generic PLA-CF @BBL A1", + "sub_path": "filament/Generic PLA-CF @BBL A1.json" + }, + { + "name": "Generic PLA-CF @BBL A1M", + "sub_path": "filament/Generic PLA-CF @BBL A1M.json" + }, + { + "name": "Generic PLA-CF @BBL A2L", + "sub_path": "filament/Generic PLA-CF @BBL A2L.json" + }, + { + "name": "Generic PLA-CF @BBL H2C", + "sub_path": "filament/Generic PLA-CF @BBL H2C.json" + }, + { + "name": "Generic PLA-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PLA-CF @BBL H2D", + "sub_path": "filament/Generic PLA-CF @BBL H2D.json" + }, + { + "name": "Generic PLA-CF @BBL H2DP", + "sub_path": "filament/Generic PLA-CF @BBL H2DP.json" + }, + { + "name": "Generic PLA-CF @BBL H2S", + "sub_path": "filament/Generic PLA-CF @BBL H2S.json" + }, + { + "name": "Generic PLA-CF @BBL P1P", + "sub_path": "filament/P1P/Generic PLA-CF @BBL P1P.json" + }, + { + "name": "Generic PLA-CF @BBL P2S", + "sub_path": "filament/Generic PLA-CF @BBL P2S.json" + }, + { + "name": "Generic PLA-CF @BBL X2D", + "sub_path": "filament/Generic PLA-CF @BBL X2D.json" + }, + { + "name": "Generic PLA-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL A1", + "sub_path": "filament/Overture Matte PLA @BBL A1.json" + }, + { + "name": "Overture Matte PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL A1M", + "sub_path": "filament/Overture Matte PLA @BBL A1M.json" + }, + { + "name": "Overture Matte PLA @BBL H2D", + "sub_path": "filament/Overture Matte PLA @BBL H2D.json" + }, + { + "name": "Overture Matte PLA @BBL H2D 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL H2DP", + "sub_path": "filament/Overture Matte PLA @BBL H2DP.json" + }, + { + "name": "Overture Matte PLA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL H2S", + "sub_path": "filament/Overture Matte PLA @BBL H2S.json" + }, + { + "name": "Overture Matte PLA @BBL H2S 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL P1P", + "sub_path": "filament/Overture Matte PLA @BBL P1P.json" + }, + { + "name": "Overture Matte PLA @BBL X1", + "sub_path": "filament/Overture Matte PLA @BBL X1.json" + }, + { + "name": "Overture Matte PLA @BBL X1C", + "sub_path": "filament/Overture Matte PLA @BBL X1C.json" + }, + { + "name": "Overture PLA @BBL A1", + "sub_path": "filament/Overture PLA @BBL A1.json" + }, + { + "name": "Overture PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL A1M", + "sub_path": "filament/Overture PLA @BBL A1M.json" + }, + { + "name": "Overture PLA @BBL H2D", + "sub_path": "filament/Overture PLA @BBL H2D.json" + }, + { + "name": "Overture PLA @BBL H2D 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL H2DP", + "sub_path": "filament/Overture PLA @BBL H2DP.json" + }, + { + "name": "Overture PLA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL H2S", + "sub_path": "filament/Overture PLA @BBL H2S.json" + }, + { + "name": "Overture PLA @BBL H2S 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL P1P", + "sub_path": "filament/Overture PLA @BBL P1P.json" + }, + { + "name": "Overture PLA @BBL X1", + "sub_path": "filament/Overture PLA @BBL X1.json" + }, + { + "name": "Overture PLA @BBL X1C", + "sub_path": "filament/Overture PLA @BBL X1C.json" + }, + { + "name": "PolyLite PLA @BBL A1", + "sub_path": "filament/PolyLite PLA @BBL A1.json" + }, + { + "name": "PolyLite PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA @BBL A1M", + "sub_path": "filament/PolyLite PLA @BBL A1M.json" + }, + { + "name": "PolyLite PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA @BBL H2D", + "sub_path": "filament/PolyLite PLA @BBL H2D.json" + }, + { + "name": "PolyLite PLA @BBL H2D 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA @BBL H2DP", + "sub_path": "filament/PolyLite PLA @BBL H2DP.json" + }, + { + "name": "PolyLite PLA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA @BBL H2S", + "sub_path": "filament/PolyLite PLA @BBL H2S.json" + }, + { + "name": "PolyLite PLA @BBL H2S 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA @BBL P1P", + "sub_path": "filament/P1P/PolyLite PLA @BBL P1P.json" + }, + { + "name": "PolyLite PLA @BBL X1", + "sub_path": "filament/PolyLite PLA @BBL X1.json" + }, + { + "name": "PolyLite PLA @BBL X1C", + "sub_path": "filament/PolyLite PLA @BBL X1C.json" + }, + { + "name": "PolyTerra PLA @BBL A1", + "sub_path": "filament/PolyTerra PLA @BBL A1.json" + }, + { + "name": "PolyTerra PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "PolyTerra PLA @BBL A1M", + "sub_path": "filament/PolyTerra PLA @BBL A1M.json" + }, + { + "name": "PolyTerra PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "PolyTerra PLA @BBL H2D", + "sub_path": "filament/PolyTerra PLA @BBL H2D.json" + }, + { + "name": "PolyTerra PLA @BBL H2D 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL H2D 0.2 nozzle.json" + }, + { + "name": "PolyTerra PLA @BBL H2DP", + "sub_path": "filament/PolyTerra PLA @BBL H2DP.json" + }, + { + "name": "PolyTerra PLA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "PolyTerra PLA @BBL H2S", + "sub_path": "filament/PolyTerra PLA @BBL H2S.json" + }, + { + "name": "PolyTerra PLA @BBL H2S 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL H2S 0.2 nozzle.json" + }, + { + "name": "PolyTerra PLA @BBL P1P", + "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P.json" + }, + { + "name": "PolyTerra PLA @BBL X1", + "sub_path": "filament/PolyTerra PLA @BBL X1.json" + }, + { + "name": "PolyTerra PLA @BBL X1C", + "sub_path": "filament/PolyTerra PLA @BBL X1C.json" + }, + { + "name": "SUNLU PLA Marble @BBL A1", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL A1.json" + }, + { + "name": "SUNLU PLA Marble @BBL A1M", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL A1M.json" + }, + { + "name": "SUNLU PLA Marble @BBL P1P", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL P1P.json" + }, + { + "name": "SUNLU PLA Marble @BBL X1", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL X1.json" + }, + { + "name": "SUNLU PLA Marble @BBL X1C", + "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL X1C.json" + }, + { + "name": "SUNLU PLA Matte @BBL A1", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1.json" + }, + { + "name": "SUNLU PLA Matte @BBL A1 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA Matte @BBL A1M", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1M.json" + }, + { + "name": "SUNLU PLA Matte @BBL A1M 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA Matte @BBL P1P", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL P1P.json" + }, + { + "name": "SUNLU PLA Matte @BBL P1P 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA Matte @BBL X1", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL X1.json" + }, + { + "name": "SUNLU PLA Matte @BBL X1C", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL X1C.json" + }, + { + "name": "SUNLU PLA Matte @BBL X1C 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL A1", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL A1M", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL P1P", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL X1", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL X1C", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json" + }, + { + "name": "SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ @BBL A1", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1.json" + }, + { + "name": "SUNLU PLA+ @BBL A1 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ @BBL A1M", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1M.json" + }, + { + "name": "SUNLU PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ @BBL P1P", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL P1P.json" + }, + { + "name": "SUNLU PLA+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "SUNLU PLA+ @BBL X1", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL X1.json" + }, + { + "name": "SUNLU PLA+ @BBL X1C", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL X1C.json" + }, + { + "name": "SUNLU PLA+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL A1", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL A1 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL A1M", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL P1P", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL X1", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL X1C", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json" + }, + { + "name": "SUNLU Silk PLA+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json" + }, + { + "name": "SUNLU Wood PLA @BBL A1", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL A1.json" + }, + { + "name": "SUNLU Wood PLA @BBL A1M", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL A1M.json" + }, + { + "name": "SUNLU Wood PLA @BBL P1P", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL P1P.json" + }, + { + "name": "SUNLU Wood PLA @BBL X1", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL X1.json" + }, + { + "name": "SUNLU Wood PLA @BBL X1C", + "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL X1C.json" + }, + { + "name": "eSUN PLA+ @BBL A1", + "sub_path": "filament/eSUN PLA+ @BBL A1.json" + }, + { + "name": "eSUN PLA+ @BBL A1 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "eSUN PLA+ @BBL A1M", + "sub_path": "filament/eSUN PLA+ @BBL A1M.json" + }, + { + "name": "eSUN PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "eSUN PLA+ @BBL H2D", + "sub_path": "filament/eSUN PLA+ @BBL H2D.json" + }, + { + "name": "eSUN PLA+ @BBL H2D 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL H2D 0.2 nozzle.json" + }, + { + "name": "eSUN PLA+ @BBL H2DP", + "sub_path": "filament/eSUN PLA+ @BBL H2DP.json" + }, + { + "name": "eSUN PLA+ @BBL H2DP 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "eSUN PLA+ @BBL H2S", + "sub_path": "filament/eSUN PLA+ @BBL H2S.json" + }, + { + "name": "eSUN PLA+ @BBL H2S 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL H2S 0.2 nozzle.json" + }, + { + "name": "eSUN PLA+ @BBL P1P", + "sub_path": "filament/P1P/eSUN PLA+ @BBL P1P.json" + }, + { + "name": "eSUN PLA+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "eSUN PLA+ @BBL X1", + "sub_path": "filament/eSUN PLA+ @BBL X1.json" + }, + { + "name": "eSUN PLA+ @BBL X1C", + "sub_path": "filament/eSUN PLA+ @BBL X1C.json" + }, + { + "name": "eSUN PLA+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Generic PP @BBL A1", + "sub_path": "filament/Generic PP @BBL A1.json" + }, + { + "name": "Generic PP @BBL A1M", + "sub_path": "filament/Generic PP @BBL A1M.json" + }, + { + "name": "Generic PP @BBL A2L", + "sub_path": "filament/Generic PP @BBL A2L.json" + }, + { + "name": "Generic PP @BBL H2C", + "sub_path": "filament/Generic PP @BBL H2C.json" + }, + { + "name": "Generic PP @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PP @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PP @BBL H2D", + "sub_path": "filament/Generic PP @BBL H2D.json" + }, + { + "name": "Generic PP @BBL H2DP", + "sub_path": "filament/Generic PP @BBL H2DP.json" + }, + { + "name": "Generic PP @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PP @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PP @BBL P2S", + "sub_path": "filament/Generic PP @BBL P2S.json" + }, + { + "name": "Generic PP @BBL X1C", + "sub_path": "filament/Generic PP @BBL X1C.json" + }, + { + "name": "Generic PP @BBL X2D", + "sub_path": "filament/Generic PP @BBL X2D.json" + }, + { + "name": "Generic PP @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PP @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PP-CF @BBL A1", + "sub_path": "filament/Generic PP-CF @BBL A1.json" + }, + { + "name": "Generic PP-CF @BBL H2C", + "sub_path": "filament/Generic PP-CF @BBL H2C.json" + }, + { + "name": "Generic PP-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PP-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PP-CF @BBL H2D", + "sub_path": "filament/Generic PP-CF @BBL H2D.json" + }, + { + "name": "Generic PP-CF @BBL H2DP", + "sub_path": "filament/Generic PP-CF @BBL H2DP.json" + }, + { + "name": "Generic PP-CF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PP-CF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PP-CF @BBL P2S", + "sub_path": "filament/Generic PP-CF @BBL P2S.json" + }, + { + "name": "Generic PP-CF @BBL X1C", + "sub_path": "filament/Generic PP-CF @BBL X1C.json" + }, + { + "name": "Generic PP-CF @BBL X2D", + "sub_path": "filament/Generic PP-CF @BBL X2D.json" + }, + { + "name": "Generic PP-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PP-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PP-GF @BBL A1", + "sub_path": "filament/Generic PP-GF @BBL A1.json" + }, + { + "name": "Generic PP-GF @BBL H2C", + "sub_path": "filament/Generic PP-GF @BBL H2C.json" + }, + { + "name": "Generic PP-GF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PP-GF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PP-GF @BBL H2D", + "sub_path": "filament/Generic PP-GF @BBL H2D.json" + }, + { + "name": "Generic PP-GF @BBL H2DP", + "sub_path": "filament/Generic PP-GF @BBL H2DP.json" + }, + { + "name": "Generic PP-GF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PP-GF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PP-GF @BBL P2S", + "sub_path": "filament/Generic PP-GF @BBL P2S.json" + }, + { + "name": "Generic PP-GF @BBL X1C", + "sub_path": "filament/Generic PP-GF @BBL X1C.json" + }, + { + "name": "Generic PP-GF @BBL X2D", + "sub_path": "filament/Generic PP-GF @BBL X2D.json" + }, + { + "name": "Generic PP-GF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PP-GF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PPA-CF @BBL H2C", + "sub_path": "filament/Bambu PPA-CF @BBL H2C.json" + }, + { + "name": "Bambu PPA-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PPA-CF @BBL H2D", + "sub_path": "filament/Bambu PPA-CF @BBL H2D.json" + }, + { + "name": "Bambu PPA-CF @BBL H2DP", + "sub_path": "filament/Bambu PPA-CF @BBL H2DP.json" + }, + { + "name": "Bambu PPA-CF @BBL H2S", + "sub_path": "filament/Bambu PPA-CF @BBL H2S.json" + }, + { + "name": "Bambu PPA-CF @BBL P2S", + "sub_path": "filament/Bambu PPA-CF @BBL P2S.json" + }, + { + "name": "Bambu PPA-CF @BBL X1C", + "sub_path": "filament/Bambu PPA-CF @BBL X1C.json" + }, + { + "name": "Bambu PPA-CF @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu PPA-CF @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu PPA-CF @BBL X1E", + "sub_path": "filament/Bambu PPA-CF @BBL X1E.json" + }, + { + "name": "Bambu PPA-CF @BBL X2D", + "sub_path": "filament/Bambu PPA-CF @BBL X2D.json" + }, + { + "name": "Bambu PPA-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PPA-CF @BBL H2C", + "sub_path": "filament/Generic PPA-CF @BBL H2C.json" + }, + { + "name": "Generic PPA-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PPA-CF @BBL H2D", + "sub_path": "filament/Generic PPA-CF @BBL H2D.json" + }, + { + "name": "Generic PPA-CF @BBL H2DP", + "sub_path": "filament/Generic PPA-CF @BBL H2DP.json" + }, + { + "name": "Generic PPA-CF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PPA-CF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PPA-CF @BBL P2S", + "sub_path": "filament/Generic PPA-CF @BBL P2S.json" + }, + { + "name": "Generic PPA-CF @BBL X1C", + "sub_path": "filament/Generic PPA-CF @BBL X1C.json" + }, + { + "name": "Generic PPA-CF @BBL X1E", + "sub_path": "filament/Generic PPA-CF @BBL X1E.json" + }, + { + "name": "Generic PPA-CF @BBL X2D", + "sub_path": "filament/Generic PPA-CF @BBL X2D.json" + }, + { + "name": "Generic PPA-CF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic PPA-GF @BBL H2C", + "sub_path": "filament/Generic PPA-GF @BBL H2C.json" + }, + { + "name": "Generic PPA-GF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PPA-GF @BBL H2D", + "sub_path": "filament/Generic PPA-GF @BBL H2D.json" + }, + { + "name": "Generic PPA-GF @BBL H2DP", + "sub_path": "filament/Generic PPA-GF @BBL H2DP.json" + }, + { + "name": "Generic PPA-GF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PPA-GF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PPA-GF @BBL P2S", + "sub_path": "filament/Generic PPA-GF @BBL P2S.json" + }, + { + "name": "Generic PPA-GF @BBL X1C", + "sub_path": "filament/Generic PPA-GF @BBL X1C.json" + }, + { + "name": "Generic PPA-GF @BBL X1E", + "sub_path": "filament/Generic PPA-GF @BBL X1E.json" + }, + { + "name": "Generic PPA-GF @BBL X2D", + "sub_path": "filament/Generic PPA-GF @BBL X2D.json" + }, + { + "name": "Generic PPA-GF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PPS-CF @BBL H2C", + "sub_path": "filament/Bambu PPS-CF @BBL H2C.json" + }, + { + "name": "Bambu PPS-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PPS-CF @BBL H2D", + "sub_path": "filament/Bambu PPS-CF @BBL H2D.json" + }, + { + "name": "Bambu PPS-CF @BBL H2DP", + "sub_path": "filament/Bambu PPS-CF @BBL H2DP.json" + }, + { + "name": "Bambu PPS-CF @BBL H2S", + "sub_path": "filament/Bambu PPS-CF @BBL H2S.json" + }, + { + "name": "Bambu PPS-CF @BBL X1E", + "sub_path": "filament/Bambu PPS-CF @BBL X1E.json" + }, + { + "name": "Generic PPS @BBL H2C", + "sub_path": "filament/Generic PPS @BBL H2C.json" + }, + { + "name": "Generic PPS @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PPS @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PPS @BBL H2D", + "sub_path": "filament/Generic PPS @BBL H2D.json" + }, + { + "name": "Generic PPS @BBL H2DP", + "sub_path": "filament/Generic PPS @BBL H2DP.json" + }, + { + "name": "Generic PPS @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PPS @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PPS @BBL X1E", + "sub_path": "filament/Generic PPS @BBL X1E.json" + }, + { + "name": "Generic PPS-CF @BBL H2C", + "sub_path": "filament/Generic PPS-CF @BBL H2C.json" + }, + { + "name": "Generic PPS-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PPS-CF @BBL H2D", + "sub_path": "filament/Generic PPS-CF @BBL H2D.json" + }, + { + "name": "Generic PPS-CF @BBL H2DP", + "sub_path": "filament/Generic PPS-CF @BBL H2DP.json" + }, + { + "name": "Generic PPS-CF @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PPS-CF @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PPS-CF @BBL X1E", + "sub_path": "filament/Generic PPS-CF @BBL X1E.json" + }, + { + "name": "Bambu PVA @BBL A1", + "sub_path": "filament/Bambu PVA @BBL A1.json" + }, + { + "name": "Bambu PVA @BBL A1 0.2 nozzle", + "sub_path": "filament/Bambu PVA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Bambu PVA @BBL A1M", + "sub_path": "filament/Bambu PVA @BBL A1M.json" + }, + { + "name": "Bambu PVA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Bambu PVA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Bambu PVA @BBL A2L", + "sub_path": "filament/Bambu PVA @BBL A2L.json" + }, + { + "name": "Bambu PVA @BBL H2C", + "sub_path": "filament/Bambu PVA @BBL H2C.json" + }, + { + "name": "Bambu PVA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu PVA @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu PVA @BBL H2D", + "sub_path": "filament/Bambu PVA @BBL H2D.json" + }, + { + "name": "Bambu PVA @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu PVA @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu PVA @BBL H2DP", + "sub_path": "filament/Bambu PVA @BBL H2DP.json" + }, + { + "name": "Bambu PVA @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu PVA @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu PVA @BBL H2S", + "sub_path": "filament/Bambu PVA @BBL H2S.json" + }, + { + "name": "Bambu PVA @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu PVA @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu PVA @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu PVA @BBL P1P", + "sub_path": "filament/Bambu PVA @BBL P1P.json" + }, + { + "name": "Bambu PVA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PVA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PVA @BBL P2S", + "sub_path": "filament/Bambu PVA @BBL P2S.json" + }, + { + "name": "Bambu PVA @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu PVA @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu PVA @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu PVA @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu PVA @BBL X1C", + "sub_path": "filament/Bambu PVA @BBL X1C.json" + }, + { + "name": "Bambu PVA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PVA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PVA @BBL X2D", + "sub_path": "filament/Bambu PVA @BBL X2D.json" + }, + { + "name": "Bambu PVA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu PVA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu PVA @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu PVA @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Generic PVA", + "sub_path": "filament/Generic PVA.json" + }, + { + "name": "Generic PVA @0.2 nozzle", + "sub_path": "filament/Generic PVA @0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL A1", + "sub_path": "filament/Generic PVA @BBL A1.json" + }, + { + "name": "Generic PVA @BBL A1 0.2 nozzle", + "sub_path": "filament/Generic PVA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL A1M", + "sub_path": "filament/Generic PVA @BBL A1M.json" + }, + { + "name": "Generic PVA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PVA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL A2L", + "sub_path": "filament/Generic PVA @BBL A2L.json" + }, + { + "name": "Generic PVA @BBL A2L 0.2 nozzle", + "sub_path": "filament/Generic PVA @BBL A2L 0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL H2C", + "sub_path": "filament/Generic PVA @BBL H2C.json" + }, + { + "name": "Generic PVA @BBL H2C 0.2 nozzle", + "sub_path": "filament/Generic PVA @BBL H2C 0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PVA @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PVA @BBL H2D", + "sub_path": "filament/Generic PVA @BBL H2D.json" + }, + { + "name": "Generic PVA @BBL H2DP", + "sub_path": "filament/Generic PVA @BBL H2DP.json" + }, + { + "name": "Generic PVA @BBL H2S 0.4 nozzle", + "sub_path": "filament/Generic PVA @BBL H2S 0.4 nozzle.json" + }, + { + "name": "Generic PVA @BBL P1P", + "sub_path": "filament/P1P/Generic PVA @BBL P1P.json" + }, + { + "name": "Generic PVA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL P2S", + "sub_path": "filament/Generic PVA @BBL P2S.json" + }, + { + "name": "Generic PVA @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic PVA @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL X2D", + "sub_path": "filament/Generic PVA @BBL X2D.json" + }, + { + "name": "Generic PVA @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic PVA @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Generic PVA @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic PVA @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL H2C", + "sub_path": "filament/Bambu TPU 85A @BBL H2C.json" + }, + { + "name": "Bambu TPU 85A @BBL H2D", + "sub_path": "filament/Bambu TPU 85A @BBL H2D.json" + }, + { + "name": "Bambu TPU 85A @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL H2DP", + "sub_path": "filament/Bambu TPU 85A @BBL H2DP.json" + }, + { + "name": "Bambu TPU 85A @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL H2S", + "sub_path": "filament/Bambu TPU 85A @BBL H2S.json" + }, + { + "name": "Bambu TPU 85A @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL P1P", + "sub_path": "filament/Bambu TPU 85A @BBL P1P.json" + }, + { + "name": "Bambu TPU 85A @BBL P2S", + "sub_path": "filament/Bambu TPU 85A @BBL P2S.json" + }, + { + "name": "Bambu TPU 85A @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 85A @BBL X1C", + "sub_path": "filament/Bambu TPU 85A @BBL X1C.json" + }, + { + "name": "Bambu TPU 85A @BBL X2D", + "sub_path": "filament/Bambu TPU 85A @BBL X2D.json" + }, + { + "name": "Bambu TPU 85A @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL A1", + "sub_path": "filament/Bambu TPU 90A @BBL A1.json" + }, + { + "name": "Bambu TPU 90A @BBL A1M", + "sub_path": "filament/Bambu TPU 90A @BBL A1M.json" + }, + { + "name": "Bambu TPU 90A @BBL A2L", + "sub_path": "filament/Bambu TPU 90A @BBL A2L.json" + }, + { + "name": "Bambu TPU 90A @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL H2C", + "sub_path": "filament/Bambu TPU 90A @BBL H2C.json" + }, + { + "name": "Bambu TPU 90A @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL H2D", + "sub_path": "filament/Bambu TPU 90A @BBL H2D.json" + }, + { + "name": "Bambu TPU 90A @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL H2DP", + "sub_path": "filament/Bambu TPU 90A @BBL H2DP.json" + }, + { + "name": "Bambu TPU 90A @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL H2S", + "sub_path": "filament/Bambu TPU 90A @BBL H2S.json" + }, + { + "name": "Bambu TPU 90A @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL P1P", + "sub_path": "filament/Bambu TPU 90A @BBL P1P.json" + }, + { + "name": "Bambu TPU 90A @BBL P2S", + "sub_path": "filament/Bambu TPU 90A @BBL P2S.json" + }, + { + "name": "Bambu TPU 90A @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL X1C", + "sub_path": "filament/Bambu TPU 90A @BBL X1C.json" + }, + { + "name": "Bambu TPU 90A @BBL X2D", + "sub_path": "filament/Bambu TPU 90A @BBL X2D.json" + }, + { + "name": "Bambu TPU 90A @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 90A @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 95A @BBL A1", + "sub_path": "filament/Bambu TPU 95A @BBL A1.json" + }, + { + "name": "Bambu TPU 95A @BBL A1M", + "sub_path": "filament/Bambu TPU 95A @BBL A1M.json" + }, + { + "name": "Bambu TPU 95A @BBL A2L", + "sub_path": "filament/Bambu TPU 95A @BBL A2L.json" + }, + { + "name": "Bambu TPU 95A @BBL H2C", + "sub_path": "filament/Bambu TPU 95A @BBL H2C.json" + }, + { + "name": "Bambu TPU 95A @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 95A @BBL H2D", + "sub_path": "filament/Bambu TPU 95A @BBL H2D.json" + }, + { + "name": "Bambu TPU 95A @BBL H2DP", + "sub_path": "filament/Bambu TPU 95A @BBL H2DP.json" + }, + { + "name": "Bambu TPU 95A @BBL H2S", + "sub_path": "filament/Bambu TPU 95A @BBL H2S.json" + }, + { + "name": "Bambu TPU 95A @BBL P1P", + "sub_path": "filament/P1P/Bambu TPU 95A @BBL P1P.json" + }, + { + "name": "Bambu TPU 95A @BBL P2S", + "sub_path": "filament/Bambu TPU 95A @BBL P2S.json" + }, + { + "name": "Bambu TPU 95A @BBL X1", + "sub_path": "filament/Bambu TPU 95A @BBL X1.json" + }, + { + "name": "Bambu TPU 95A @BBL X1C", + "sub_path": "filament/Bambu TPU 95A @BBL X1C.json" + }, + { + "name": "Bambu TPU 95A @BBL X2D", + "sub_path": "filament/Bambu TPU 95A @BBL X2D.json" + }, + { + "name": "Bambu TPU 95A @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL A1", + "sub_path": "filament/Bambu TPU 95A HF @BBL A1.json" + }, + { + "name": "Bambu TPU 95A HF @BBL A1M", + "sub_path": "filament/Bambu TPU 95A HF @BBL A1M.json" + }, + { + "name": "Bambu TPU 95A HF @BBL A2L", + "sub_path": "filament/Bambu TPU 95A HF @BBL A2L.json" + }, + { + "name": "Bambu TPU 95A HF @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2C", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2C.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2D", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2D.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2DP", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2DP.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2S", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2S.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL P1P", + "sub_path": "filament/Bambu TPU 95A HF @BBL P1P.json" + }, + { + "name": "Bambu TPU 95A HF @BBL P1S", + "sub_path": "filament/Bambu TPU 95A HF @BBL P1S.json" + }, + { + "name": "Bambu TPU 95A HF @BBL P2S", + "sub_path": "filament/Bambu TPU 95A HF @BBL P2S.json" + }, + { + "name": "Bambu TPU 95A HF @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL X1", + "sub_path": "filament/Bambu TPU 95A HF @BBL X1.json" + }, + { + "name": "Bambu TPU 95A HF @BBL X1C", + "sub_path": "filament/Bambu TPU 95A HF @BBL X1C.json" + }, + { + "name": "Bambu TPU 95A HF @BBL X1E", + "sub_path": "filament/Bambu TPU 95A HF @BBL X1E.json" + }, + { + "name": "Bambu TPU 95A HF @BBL X2D", + "sub_path": "filament/Bambu TPU 95A HF @BBL X2D.json" + }, + { + "name": "Bambu TPU 95A HF @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL A1", + "sub_path": "filament/Bambu TPU for AMS @BBL A1.json" + }, + { + "name": "Bambu TPU for AMS @BBL A1M", + "sub_path": "filament/Bambu TPU for AMS @BBL A1M.json" + }, + { + "name": "Bambu TPU for AMS @BBL A2L", + "sub_path": "filament/Bambu TPU for AMS @BBL A2L.json" + }, + { + "name": "Bambu TPU for AMS @BBL A2L 0.6 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL A2L 0.8 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2C", + "sub_path": "filament/Bambu TPU for AMS @BBL H2C.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2C 0.4 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2C 0.8 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2C 0.8 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2D", + "sub_path": "filament/Bambu TPU for AMS @BBL H2D.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2D 0.6 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2D 0.6 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2D 0.8 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2D 0.8 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2DP", + "sub_path": "filament/Bambu TPU for AMS @BBL H2DP.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2DP 0.6 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2DP 0.6 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2DP 0.8 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2DP 0.8 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2S", + "sub_path": "filament/Bambu TPU for AMS @BBL H2S.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2S 0.6 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2S 0.6 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL H2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL H2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL P1P", + "sub_path": "filament/Bambu TPU for AMS @BBL P1P.json" + }, + { + "name": "Bambu TPU for AMS @BBL P1P 0.6 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL P1P 0.6 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL P2S", + "sub_path": "filament/Bambu TPU for AMS @BBL P2S.json" + }, + { + "name": "Bambu TPU for AMS @BBL P2S 0.6 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL P2S 0.6 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL P2S 0.8 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL P2S 0.8 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL X1C", + "sub_path": "filament/Bambu TPU for AMS @BBL X1C.json" + }, + { + "name": "Bambu TPU for AMS @BBL X1C 0.6 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL X1C 0.6 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL X2D", + "sub_path": "filament/Bambu TPU for AMS @BBL X2D.json" + }, + { + "name": "Bambu TPU for AMS @BBL X2D 0.4 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Bambu TPU for AMS @BBL X2D 0.8 nozzle", + "sub_path": "filament/Bambu TPU for AMS @BBL X2D 0.8 nozzle.json" + }, + { + "name": "Generic TPU", + "sub_path": "filament/Generic TPU.json" + }, + { + "name": "Generic TPU @BBL H2C", + "sub_path": "filament/Generic TPU @BBL H2C.json" + }, + { + "name": "Generic TPU @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic TPU @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic TPU @BBL H2D", + "sub_path": "filament/Generic TPU @BBL H2D.json" + }, + { + "name": "Generic TPU @BBL H2DP", + "sub_path": "filament/Generic TPU @BBL H2DP.json" + }, + { + "name": "Generic TPU @BBL P1P", + "sub_path": "filament/P1P/Generic TPU @BBL P1P.json" + }, + { + "name": "Generic TPU @BBL P2S", + "sub_path": "filament/Generic TPU @BBL P2S.json" + }, + { + "name": "Generic TPU @BBL X2D", + "sub_path": "filament/Generic TPU @BBL X2D.json" + }, + { + "name": "Generic TPU @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic TPU for AMS @BBL A1", + "sub_path": "filament/Generic TPU for AMS @BBL A1.json" + }, + { + "name": "Generic TPU for AMS @BBL A1M", + "sub_path": "filament/Generic TPU for AMS @BBL A1M.json" + }, + { + "name": "Generic TPU for AMS @BBL A2L", + "sub_path": "filament/Generic TPU for AMS @BBL A2L.json" + }, + { + "name": "Generic TPU for AMS @BBL H2C", + "sub_path": "filament/Generic TPU for AMS @BBL H2C.json" + }, + { + "name": "Generic TPU for AMS @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic TPU for AMS @BBL H2D", + "sub_path": "filament/Generic TPU for AMS @BBL H2D.json" + }, + { + "name": "Generic TPU for AMS @BBL H2DP", + "sub_path": "filament/Generic TPU for AMS @BBL H2DP.json" + }, + { + "name": "Generic TPU for AMS @BBL H2S", + "sub_path": "filament/Generic TPU for AMS @BBL H2S.json" + }, + { + "name": "Generic TPU for AMS @BBL P1P", + "sub_path": "filament/Generic TPU for AMS @BBL P1P.json" + }, + { + "name": "Generic TPU for AMS @BBL P2S", + "sub_path": "filament/Generic TPU for AMS @BBL P2S.json" + }, + { + "name": "Generic TPU for AMS @BBL X1C", + "sub_path": "filament/Generic TPU for AMS @BBL X1C.json" + }, + { + "name": "Generic TPU for AMS @BBL X2D", + "sub_path": "filament/Generic TPU for AMS @BBL X2D.json" + }, + { + "name": "Generic TPU for AMS @BBL X2D 0.4 nozzle", + "sub_path": "filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json" + }, + { + "name": "Generic ABS @BBL H2DP", + "sub_path": "filament/Generic ABS @BBL H2DP.json" + }, + { + "name": "Generic ABS @BBL X1E", + "sub_path": "filament/Generic ABS @BBL X1E.json" + }, + { + "name": "Generic ABS @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic ABS @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic ABS @BBL X1E 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL P1P 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL P1P 0.2 nozzle.json" + }, + { + "name": "PolyLite ABS @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyLite ABS @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL H2DP", + "sub_path": "filament/Generic ASA @BBL H2DP.json" + }, + { + "name": "Generic ASA @BBL X1E", + "sub_path": "filament/Generic ASA @BBL X1E.json" + }, + { + "name": "Generic ASA @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic ASA @BBL X1E 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL P1P 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "PolyLite ASA @BBL X1E 0.2 nozzle", + "sub_path": "filament/PolyLite ASA @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Generic PA @BBL A1", + "sub_path": "filament/Generic PA @BBL A1.json" + }, + { + "name": "Generic PA-CF @BBL A1", + "sub_path": "filament/Generic PA-CF @BBL A1.json" + }, + { + "name": "Generic PA-CF @BBL H2C", + "sub_path": "filament/Generic PA-CF @BBL H2C.json" + }, + { + "name": "Generic PA-CF @BBL H2C 0.4 nozzle", + "sub_path": "filament/Generic PA-CF @BBL H2C 0.4 nozzle.json" + }, + { + "name": "Generic PA-CF @BBL H2D", + "sub_path": "filament/Generic PA-CF @BBL H2D.json" + }, + { + "name": "Generic PA-CF @BBL H2DP", + "sub_path": "filament/Generic PA-CF @BBL H2DP.json" + }, + { + "name": "Generic PA-CF @BBL X1E", + "sub_path": "filament/Generic PA-CF @BBL X1E.json" + }, + { + "name": "Bambu PC @BBL P1S", + "sub_path": "filament/Bambu PC @BBL P1S.json" + }, + { + "name": "Bambu PC @BBL P1S 0.2 nozzle", + "sub_path": "filament/Bambu PC @BBL P1S 0.2 nozzle.json" + }, + { + "name": "Bambu PC @BBL P1S 0.6 nozzle", + "sub_path": "filament/Bambu PC @BBL P1S 0.6 nozzle.json" + }, + { + "name": "Bambu PC @BBL P1S 0.8 nozzle", + "sub_path": "filament/Bambu PC @BBL P1S 0.8 nozzle.json" + }, + { + "name": "Generic PC @BBL H2DP", + "sub_path": "filament/Generic PC @BBL H2DP.json" + }, + { + "name": "Generic PC @BBL P1S", + "sub_path": "filament/Generic PC @BBL P1S.json" + }, + { + "name": "Generic PC @BBL P2S", + "sub_path": "filament/Generic PC @BBL P2S.json" + }, + { + "name": "Generic PC @BBL X1E", + "sub_path": "filament/Generic PC @BBL X1E.json" + }, + { + "name": "Generic PC @BBL H2DP 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL H2DP 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL P1S 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL P1S 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL P2S 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL P2S 0.2 nozzle.json" + }, + { + "name": "Generic PC @BBL X1E 0.2 nozzle", + "sub_path": "filament/Generic PC @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle", + "sub_path": "filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL A1M 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL A1M 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL P1P 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL P1P 0.2 nozzle.json" + }, + { + "name": "PolyLite PETG @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyLite PETG @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL P1P 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL X1 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL X1 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL X1C 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu PLA Glow @BBL X1E 0.2 nozzle", + "sub_path": "filament/Bambu PLA Glow @BBL X1E 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Generic PLA High Speed @BBL X2D 0.2 nozzle", + "sub_path": "filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture Matte PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyLite PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "PolyTerra PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "PolyTerra PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2D 0.4 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "Bambu TPU 95A HF @BBL H2DP 0.4 nozzle", + "sub_path": "filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json" + }, + { + "name": "Generic TPU @BBL A1", + "sub_path": "filament/Generic TPU @BBL A1.json" + }, + { + "name": "Generic TPU @BBL A1M", + "sub_path": "filament/Generic TPU @BBL A1M.json" + }, + { + "name": "Generic TPU @BBL A2L", + "sub_path": "filament/Generic TPU @BBL A2L.json" + }, + { + "name": "Generic TPU @BBL H2S", + "sub_path": "filament/Generic TPU @BBL H2S.json" + } + ], + "machine_list": [ + { + "name": "Bambu Lab A1 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab A1 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab A1 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab A1 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab A1 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab A1 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab A1 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab A1 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab A1 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab A1 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab A1 mini 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab A1 mini 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab A1 mini 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab A1 mini 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab A2L 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab A2L 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab A2L 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab A2L 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab A2L 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab A2L 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab A2L 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab A2L 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab A2L 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab A2L 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab H2C 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab H2C 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab H2C 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab H2C 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab H2C 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab H2C 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab H2C 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab H2C 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab H2C 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab H2C 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode", + "sub_path": "machine/Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode.json" + }, + { + "name": "Bambu Lab H2D 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab H2D 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab H2D 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab H2D 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab H2D 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab H2D 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab H2D 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab H2D 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab H2D 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab H2D 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab H2D 0.4 nozzle template wrapping_detection_gcode", + "sub_path": "machine/Bambu Lab H2D 0.4 nozzle template wrapping_detection_gcode.json" + }, + { + "name": "Bambu Lab H2D Pro 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab H2D Pro 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab H2D Pro 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab H2D Pro 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab H2D Pro 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab H2D Pro 0.4 nozzle template wrapping_detection_gcode", + "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle template wrapping_detection_gcode.json" + }, + { + "name": "Bambu Lab H2S 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab H2S 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab H2S 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab H2S 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab H2S 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab H2S 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab H2S 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab H2S 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab H2S 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab H2S 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab H2S 0.4 nozzle template wrapping_detection_gcode", + "sub_path": "machine/Bambu Lab H2S 0.4 nozzle template wrapping_detection_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.2 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1P 0.2 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab P1P 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab P1P 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab P1P 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1P 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab P1P 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.6 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1P 0.6 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P1P 0.8 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1P 0.8 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.2 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1S 0.2 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab P1S 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab P1S 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab P1S 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1S 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab P1S 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.6 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1S 0.6 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P1S 0.8 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P1S 0.8 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P2S 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab P2S 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab P2S 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab P2S 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab P2S 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab P2S 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab P2S 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab P2S 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab P2S 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab P2S 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode", + "sub_path": "machine/Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode.json" + }, + { + "name": "Bambu Lab X1 0.2 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 0.2 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab X1 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab X1 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab X1 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab X1 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab X1 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab X1 0.6 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 0.6 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1 0.8 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 0.8 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.2 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.2 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.6 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.6 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.8 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1 Carbon 0.8 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.2 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1E 0.2 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.6 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1E 0.6 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X1E 0.8 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X1E 0.8 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X2D 0.4 nozzle template change_filament_gcode", + "sub_path": "machine/Bambu Lab X2D 0.4 nozzle template change_filament_gcode.json" + }, + { + "name": "Bambu Lab X2D 0.4 nozzle template layer_change_gcode", + "sub_path": "machine/Bambu Lab X2D 0.4 nozzle template layer_change_gcode.json" + }, + { + "name": "Bambu Lab X2D 0.4 nozzle template machine_end_gcode", + "sub_path": "machine/Bambu Lab X2D 0.4 nozzle template machine_end_gcode.json" + }, + { + "name": "Bambu Lab X2D 0.4 nozzle template machine_start_gcode", + "sub_path": "machine/Bambu Lab X2D 0.4 nozzle template machine_start_gcode.json" + }, + { + "name": "Bambu Lab X2D 0.4 nozzle template time_lapse_gcode", + "sub_path": "machine/Bambu Lab X2D 0.4 nozzle template time_lapse_gcode.json" + }, + { + "name": "fdm_machine_common", + "sub_path": "machine/fdm_machine_common.json" + }, + { + "name": "fdm_bbl_3dp_001_common", + "sub_path": "machine/fdm_bbl_3dp_001_common.json" + }, + { + "name": "fdm_bbl_3dp_002_common", + "sub_path": "machine/fdm_bbl_3dp_002_common.json" + }, + { + "name": "Bambu Lab A1 0.4 nozzle", + "sub_path": "machine/Bambu Lab A1 0.4 nozzle.json" + }, + { + "name": "Bambu Lab A1 mini 0.4 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle.json" + }, + { + "name": "Bambu Lab A2L 0.4 nozzle", + "sub_path": "machine/Bambu Lab A2L 0.4 nozzle.json" + }, + { + "name": "Bambu Lab H2S 0.4 nozzle", + "sub_path": "machine/Bambu Lab H2S 0.4 nozzle.json" + }, + { + "name": "Bambu Lab P1P 0.4 nozzle", + "sub_path": "machine/Bambu Lab P1P 0.4 nozzle.json" + }, + { + "name": "Bambu Lab P1S 0.4 nozzle", + "sub_path": "machine/Bambu Lab P1S 0.4 nozzle.json" + }, + { + "name": "Bambu Lab P2S 0.4 nozzle", + "sub_path": "machine/Bambu Lab P2S 0.4 nozzle.json" + }, + { + "name": "Bambu Lab X1 0.4 nozzle", + "sub_path": "machine/Bambu Lab X1 0.4 nozzle.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.4 nozzle", + "sub_path": "machine/Bambu Lab X1 Carbon 0.4 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.4 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.4 nozzle.json" + }, + { + "name": "Bambu Lab H2C 0.4 nozzle", + "sub_path": "machine/Bambu Lab H2C 0.4 nozzle.json" + }, + { + "name": "Bambu Lab H2D 0.4 nozzle", + "sub_path": "machine/Bambu Lab H2D 0.4 nozzle.json" + }, + { + "name": "Bambu Lab H2D Pro 0.4 nozzle", + "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle.json" + }, + { + "name": "Bambu Lab X2D 0.4 nozzle", + "sub_path": "machine/Bambu Lab X2D 0.4 nozzle.json" + }, + { + "name": "Bambu Lab A1 0.2 nozzle", + "sub_path": "machine/Bambu Lab A1 0.2 nozzle.json" + }, + { + "name": "Bambu Lab A1 0.6 nozzle", + "sub_path": "machine/Bambu Lab A1 0.6 nozzle.json" + }, + { + "name": "Bambu Lab A1 0.8 nozzle", + "sub_path": "machine/Bambu Lab A1 0.8 nozzle.json" + }, + { + "name": "Bambu Lab A1 mini 0.2 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.2 nozzle.json" + }, + { + "name": "Bambu Lab A1 mini 0.6 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.6 nozzle.json" + }, + { + "name": "Bambu Lab A1 mini 0.8 nozzle", + "sub_path": "machine/Bambu Lab A1 mini 0.8 nozzle.json" + }, + { + "name": "Bambu Lab A2L 0.2 nozzle", + "sub_path": "machine/Bambu Lab A2L 0.2 nozzle.json" + }, + { + "name": "Bambu Lab A2L 0.6 nozzle", + "sub_path": "machine/Bambu Lab A2L 0.6 nozzle.json" + }, + { + "name": "Bambu Lab A2L 0.8 nozzle", + "sub_path": "machine/Bambu Lab A2L 0.8 nozzle.json" + }, + { + "name": "Bambu Lab H2S 0.2 nozzle", + "sub_path": "machine/Bambu Lab H2S 0.2 nozzle.json" + }, + { + "name": "Bambu Lab H2S 0.6 nozzle", + "sub_path": "machine/Bambu Lab H2S 0.6 nozzle.json" + }, + { + "name": "Bambu Lab H2S 0.8 nozzle", + "sub_path": "machine/Bambu Lab H2S 0.8 nozzle.json" + }, + { + "name": "Bambu Lab P1P 0.2 nozzle", + "sub_path": "machine/Bambu Lab P1P 0.2 nozzle.json" + }, + { + "name": "Bambu Lab P1P 0.6 nozzle", + "sub_path": "machine/Bambu Lab P1P 0.6 nozzle.json" + }, + { + "name": "Bambu Lab P1P 0.8 nozzle", + "sub_path": "machine/Bambu Lab P1P 0.8 nozzle.json" + }, + { + "name": "Bambu Lab P1S 0.2 nozzle", + "sub_path": "machine/Bambu Lab P1S 0.2 nozzle.json" + }, + { + "name": "Bambu Lab P1S 0.6 nozzle", + "sub_path": "machine/Bambu Lab P1S 0.6 nozzle.json" + }, + { + "name": "Bambu Lab P1S 0.8 nozzle", + "sub_path": "machine/Bambu Lab P1S 0.8 nozzle.json" + }, + { + "name": "Bambu Lab P2S 0.2 nozzle", + "sub_path": "machine/Bambu Lab P2S 0.2 nozzle.json" + }, + { + "name": "Bambu Lab P2S 0.6 nozzle", + "sub_path": "machine/Bambu Lab P2S 0.6 nozzle.json" + }, + { + "name": "Bambu Lab P2S 0.8 nozzle", + "sub_path": "machine/Bambu Lab P2S 0.8 nozzle.json" + }, + { + "name": "Bambu Lab X1 0.2 nozzle", + "sub_path": "machine/Bambu Lab X1 0.2 nozzle.json" + }, + { + "name": "Bambu Lab X1 0.6 nozzle", + "sub_path": "machine/Bambu Lab X1 0.6 nozzle.json" + }, + { + "name": "Bambu Lab X1 0.8 nozzle", + "sub_path": "machine/Bambu Lab X1 0.8 nozzle.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.2 nozzle", + "sub_path": "machine/Bambu Lab X1 Carbon 0.2 nozzle.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.6 nozzle", + "sub_path": "machine/Bambu Lab X1 Carbon 0.6 nozzle.json" + }, + { + "name": "Bambu Lab X1 Carbon 0.8 nozzle", + "sub_path": "machine/Bambu Lab X1 Carbon 0.8 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.2 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.2 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.6 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.6 nozzle.json" + }, + { + "name": "Bambu Lab X1E 0.8 nozzle", + "sub_path": "machine/Bambu Lab X1E 0.8 nozzle.json" + }, + { + "name": "Bambu Lab H2C 0.2 nozzle", + "sub_path": "machine/Bambu Lab H2C 0.2 nozzle.json" + }, + { + "name": "Bambu Lab H2C 0.6 nozzle", + "sub_path": "machine/Bambu Lab H2C 0.6 nozzle.json" + }, + { + "name": "Bambu Lab H2C 0.8 nozzle", + "sub_path": "machine/Bambu Lab H2C 0.8 nozzle.json" + }, + { + "name": "Bambu Lab H2D 0.2 nozzle", + "sub_path": "machine/Bambu Lab H2D 0.2 nozzle.json" + }, + { + "name": "Bambu Lab H2D 0.6 nozzle", + "sub_path": "machine/Bambu Lab H2D 0.6 nozzle.json" + }, + { + "name": "Bambu Lab H2D 0.8 nozzle", + "sub_path": "machine/Bambu Lab H2D 0.8 nozzle.json" + }, + { + "name": "Bambu Lab H2D Pro 0.2 nozzle", + "sub_path": "machine/Bambu Lab H2D Pro 0.2 nozzle.json" + }, + { + "name": "Bambu Lab H2D Pro 0.6 nozzle", + "sub_path": "machine/Bambu Lab H2D Pro 0.6 nozzle.json" + }, + { + "name": "Bambu Lab H2D Pro 0.8 nozzle", + "sub_path": "machine/Bambu Lab H2D Pro 0.8 nozzle.json" + }, + { + "name": "Bambu Lab X2D 0.2 nozzle", + "sub_path": "machine/Bambu Lab X2D 0.2 nozzle.json" + }, + { + "name": "Bambu Lab X2D 0.6 nozzle", + "sub_path": "machine/Bambu Lab X2D 0.6 nozzle.json" + }, + { + "name": "Bambu Lab X2D 0.8 nozzle", + "sub_path": "machine/Bambu Lab X2D 0.8 nozzle.json" + } + ], "process_list": [ { "name": "fdm_process_common", @@ -419,6 +9215,10 @@ "name": "0.24mm Standard @BBL X2D", "sub_path": "process/0.24mm Standard @BBL X2D.json" }, + { + "name": "0.24mm Balanced Quality @BBL H2C 0.6 nozzle", + "sub_path": "process/0.24mm Balanced Quality @BBL H2C 0.6 nozzle.json" + }, { "name": "0.24mm Balanced Quality @BBL X2D 0.6 nozzle", "sub_path": "process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json" @@ -467,6 +9267,10 @@ "name": "0.30mm Standard @BBL X2D 0.6 nozzle", "sub_path": "process/0.30mm Standard @BBL X2D 0.6 nozzle.json" }, + { + "name": "0.32mm Balanced Quality @BBL H2C 0.8 nozzle", + "sub_path": "process/0.32mm Balanced Quality @BBL H2C 0.8 nozzle.json" + }, { "name": "0.32mm Balanced Quality @BBL X2D 0.8 nozzle", "sub_path": "process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json" @@ -1167,10357 +9971,5 @@ "name": "0.56mm Standard @BBL X1C 0.8 nozzle", "sub_path": "process/0.56mm Standard @BBL X1C 0.8 nozzle.json" } - ], - "filament_list": [ - { - "name": "COEX PCTG PRIME @BBL X1C", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL X1C.json" - }, - { - "name": "COEX PCTG PRIME @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX PCTG PRIME @BBL X1C 0.8 nozzle", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json" - }, - { - "name": "COEX PETG @BBL X1C", - "sub_path": "filament/COEX/COEX PETG @BBL X1C.json" - }, - { - "name": "COEX PETG @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX PETG @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX PETG @BBL X1C 0.8 nozzle", - "sub_path": "filament/COEX/COEX PETG @BBL X1C 0.8 nozzle.json" - }, - { - "name": "COEX PLA @BBL A1M", - "sub_path": "filament/COEX/COEX PLA @BBL A1M.json" - }, - { - "name": "COEX PLA @BBL P1P", - "sub_path": "filament/COEX/COEX PLA @BBL P1P.json" - }, - { - "name": "COEX PLA @BBL X1C", - "sub_path": "filament/COEX/COEX PLA @BBL X1C.json" - }, - { - "name": "fdm_filament_common", - "sub_path": "filament/fdm_filament_common.json" - }, - { - "name": "COEX PCTG PRIME @BBL A1M 0.4 nozzle", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL A1M.json" - }, - { - "name": "COEX PCTG PRIME @BBL A1M 0.2 nozzle", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json" - }, - { - "name": "COEX PCTG PRIME @BBL A1M 0.8 nozzle", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json" - }, - { - "name": "COEX PETG @BBL A1M 0.4 nozzle", - "sub_path": "filament/COEX/COEX PETG @BBL A1M.json" - }, - { - "name": "COEX PETG @BBL A1M 0.2 nozzle", - "sub_path": "filament/COEX/COEX PETG @BBL A1M 0.2 nozzle.json" - }, - { - "name": "COEX PETG @BBL A1M 0.8 nozzle", - "sub_path": "filament/COEX/COEX PETG @BBL A1M 0.8 nozzle.json" - }, - { - "name": "COEX PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "COEX PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "COEX PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "FusRock ABS-GF @base", - "sub_path": "filament/FusRock/FusRock ABS-GF @base.json" - }, - { - "name": "fdm_filament_abs", - "sub_path": "filament/fdm_filament_abs.json" - }, - { - "name": "fdm_filament_asa", - "sub_path": "filament/fdm_filament_asa.json" - }, - { - "name": "fdm_filament_bvoh", - "sub_path": "filament/fdm_filament_bvoh.json" - }, - { - "name": "fdm_filament_eva", - "sub_path": "filament/fdm_filament_eva.json" - }, - { - "name": "fdm_filament_hips", - "sub_path": "filament/fdm_filament_hips.json" - }, - { - "name": "fdm_filament_pa", - "sub_path": "filament/fdm_filament_pa.json" - }, - { - "name": "fdm_filament_pc", - "sub_path": "filament/fdm_filament_pc.json" - }, - { - "name": "fdm_filament_pctg", - "sub_path": "filament/fdm_filament_pctg.json" - }, - { - "name": "fdm_filament_pe", - "sub_path": "filament/fdm_filament_pe.json" - }, - { - "name": "fdm_filament_pet", - "sub_path": "filament/fdm_filament_pet.json" - }, - { - "name": "fdm_filament_pha", - "sub_path": "filament/fdm_filament_pha.json" - }, - { - "name": "fdm_filament_pla", - "sub_path": "filament/fdm_filament_pla.json" - }, - { - "name": "fdm_filament_pp", - "sub_path": "filament/fdm_filament_pp.json" - }, - { - "name": "fdm_filament_ppa", - "sub_path": "filament/fdm_filament_ppa.json" - }, - { - "name": "fdm_filament_pps", - "sub_path": "filament/fdm_filament_pps.json" - }, - { - "name": "fdm_filament_pva", - "sub_path": "filament/fdm_filament_pva.json" - }, - { - "name": "fdm_filament_sbs", - "sub_path": "filament/fdm_filament_sbs.json" - }, - { - "name": "fdm_filament_tpu", - "sub_path": "filament/fdm_filament_tpu.json" - }, - { - "name": "FusRock ABS-GF @BBL A1", - "sub_path": "filament/FusRock/FusRock ABS-GF @BBL A1.json" - }, - { - "name": "FusRock ABS-GF @BBL H2D", - "sub_path": "filament/FusRock/FusRock ABS-GF @BBL H2D.json" - }, - { - "name": "FusRock ABS-GF @BBL P1P", - "sub_path": "filament/FusRock/FusRock ABS-GF @BBL P1P.json" - }, - { - "name": "FusRock ABS-GF @BBL X1C", - "sub_path": "filament/FusRock/FusRock ABS-GF @BBL X1C.json" - }, - { - "name": "BETA ABS @base", - "sub_path": "filament/BETA/BETA ABS @base.json" - }, - { - "name": "Bambu ABS @base", - "sub_path": "filament/Bambu ABS @base.json" - }, - { - "name": "Bambu ABS-GF @base", - "sub_path": "filament/Bambu ABS-GF @base.json" - }, - { - "name": "Bambu Support for ABS @base", - "sub_path": "filament/Bambu Support for ABS @base.json" - }, - { - "name": "Generic ABS @base", - "sub_path": "filament/Generic ABS @base.json" - }, - { - "name": "PolyLite ABS @base", - "sub_path": "filament/Polymaker/PolyLite ABS @base.json" - }, - { - "name": "BETA ASA @base", - "sub_path": "filament/BETA/BETA ASA @base.json" - }, - { - "name": "Bambu ASA @base", - "sub_path": "filament/Bambu ASA @base.json" - }, - { - "name": "Bambu ASA-Aero @base", - "sub_path": "filament/Bambu ASA-Aero @base.json" - }, - { - "name": "Bambu ASA-CF @base", - "sub_path": "filament/Bambu ASA-CF @base.json" - }, - { - "name": "Generic ASA @base", - "sub_path": "filament/Generic ASA @base.json" - }, - { - "name": "PolyLite ASA @base", - "sub_path": "filament/Polymaker/PolyLite ASA @base.json" - }, - { - "name": "Generic BVOH @base", - "sub_path": "filament/Generic BVOH @base.json" - }, - { - "name": "Generic EVA @base", - "sub_path": "filament/Generic EVA @base.json" - }, - { - "name": "BETA HIPS @base", - "sub_path": "filament/BETA/BETA HIPS @base.json" - }, - { - "name": "Generic HIPS @base", - "sub_path": "filament/Generic HIPS @base.json" - }, - { - "name": "BETA PAHT-CF @base", - "sub_path": "filament/BETA/BETA PAHT-CF @base.json" - }, - { - "name": "Bambu PA-CF @base", - "sub_path": "filament/Bambu PA-CF @base.json" - }, - { - "name": "Bambu PA6-CF @base", - "sub_path": "filament/Bambu PA6-CF @base.json" - }, - { - "name": "Bambu PA6-GF @base", - "sub_path": "filament/Bambu PA6-GF @base.json" - }, - { - "name": "Bambu PAHT-CF @base", - "sub_path": "filament/Bambu PAHT-CF @base.json" - }, - { - "name": "Bambu Support For PA/PET @base", - "sub_path": "filament/Bambu Support For PA PET @base.json" - }, - { - "name": "Bambu Support G @base", - "sub_path": "filament/Bambu Support G @base.json" - }, - { - "name": "Fiberon PA12-CF @base", - "sub_path": "filament/Polymaker/Fiberon PA12-CF @base.json" - }, - { - "name": "Fiberon PA12-CF10 @base", - "sub_path": "filament/Polymaker/Fiberon PA12-CF10 @base.json" - }, - { - "name": "Fiberon PA6-CF @base", - "sub_path": "filament/Polymaker/Fiberon PA6-CF @base.json" - }, - { - "name": "Fiberon PA6-CF20 @base", - "sub_path": "filament/Polymaker/Fiberon PA6-CF20 @base.json" - }, - { - "name": "Fiberon PA6-GF @base", - "sub_path": "filament/Polymaker/Fiberon PA6-GF @base.json" - }, - { - "name": "Fiberon PA6-GF25 @base", - "sub_path": "filament/Polymaker/Fiberon PA6-GF25 @base.json" - }, - { - "name": "Fiberon PA612-CF @base", - "sub_path": "filament/Polymaker/Fiberon PA612-CF @base.json" - }, - { - "name": "Fiberon PA612-CF15 @base", - "sub_path": "filament/Polymaker/Fiberon PA612-CF15 @base.json" - }, - { - "name": "Generic PA @base", - "sub_path": "filament/Generic PA @base.json" - }, - { - "name": "Generic PA-CF @base", - "sub_path": "filament/Generic PA-CF @base.json" - }, - { - "name": "Bambu PC @base", - "sub_path": "filament/Bambu PC @base.json" - }, - { - "name": "Bambu PC FR @base", - "sub_path": "filament/Bambu PC FR @base.json" - }, - { - "name": "Generic PC @base", - "sub_path": "filament/Generic PC @base.json" - }, - { - "name": "Generic PCTG @base", - "sub_path": "filament/Generic PCTG @base.json" - }, - { - "name": "Generic PE @base", - "sub_path": "filament/Generic PE @base.json" - }, - { - "name": "Generic PE-CF @base", - "sub_path": "filament/Generic PE-CF @base.json" - }, - { - "name": "BETA PETG @base", - "sub_path": "filament/BETA/BETA PETG @base.json" - }, - { - "name": "BETA PETG Fluorescence @base", - "sub_path": "filament/BETA/BETA PETG Fluorescence @base.json" - }, - { - "name": "BETA PETG Glitter @base", - "sub_path": "filament/BETA/BETA PETG Glitter @base.json" - }, - { - "name": "BETA PETG Glow @base", - "sub_path": "filament/BETA/BETA PETG Glow @base.json" - }, - { - "name": "BETA PETG Gradient @base", - "sub_path": "filament/BETA/BETA PETG Gradient @base.json" - }, - { - "name": "BETA PETG HF @base", - "sub_path": "filament/BETA/BETA PETG HF @base.json" - }, - { - "name": "BETA PETG Heat Color Change @base", - "sub_path": "filament/BETA/BETA PETG Heat Color Change @base.json" - }, - { - "name": "BETA PETG Marble @base", - "sub_path": "filament/BETA/BETA PETG Marble @base.json" - }, - { - "name": "BETA PETG Matte @base", - "sub_path": "filament/BETA/BETA PETG Matte @base.json" - }, - { - "name": "BETA PETG Metallic @base", - "sub_path": "filament/BETA/BETA PETG Metallic @base.json" - }, - { - "name": "BETA PETG Transparent @base", - "sub_path": "filament/BETA/BETA PETG Transparent @base.json" - }, - { - "name": "BETA PETG UV Color Change @base", - "sub_path": "filament/BETA/BETA PETG UV Color Change @base.json" - }, - { - "name": "BETA PETG-CF @base", - "sub_path": "filament/BETA/BETA PETG-CF @base.json" - }, - { - "name": "BETA PETG-GF @base", - "sub_path": "filament/BETA/BETA PETG-GF @base.json" - }, - { - "name": "Bambu PET-CF @base", - "sub_path": "filament/Bambu PET-CF @base.json" - }, - { - "name": "Bambu PETG Basic @base", - "sub_path": "filament/Bambu PETG Basic @base.json" - }, - { - "name": "Bambu PETG HF @base", - "sub_path": "filament/Bambu PETG HF @base.json" - }, - { - "name": "Bambu PETG Translucent @base", - "sub_path": "filament/Bambu PETG Translucent @base.json" - }, - { - "name": "Bambu PETG-CF @base", - "sub_path": "filament/Bambu PETG-CF @base.json" - }, - { - "name": "Fiberon PET-CF @base", - "sub_path": "filament/Polymaker/Fiberon PET-CF @base.json" - }, - { - "name": "Fiberon PET-CF17 @base", - "sub_path": "filament/Polymaker/Fiberon PET-CF17 @base.json" - }, - { - "name": "Fiberon PETG-ESD @base", - "sub_path": "filament/Polymaker/Fiberon PETG-ESD @base.json" - }, - { - "name": "Fiberon PETG-rCF @base", - "sub_path": "filament/Polymaker/Fiberon PETG-rCF @base.json" - }, - { - "name": "Fiberon PETG-rCF08 @base", - "sub_path": "filament/Polymaker/Fiberon PETG-rCF08 @base.json" - }, - { - "name": "Generic PETG @base", - "sub_path": "filament/Generic PETG @base.json" - }, - { - "name": "Generic PETG HF @base", - "sub_path": "filament/Generic PETG HF @base.json" - }, - { - "name": "Generic PETG-CF @base", - "sub_path": "filament/Generic PETG-CF @base.json" - }, - { - "name": "PolyLite PETG @base", - "sub_path": "filament/Polymaker/PolyLite PETG @base.json" - }, - { - "name": "SUNLU PETG @base", - "sub_path": "filament/SUNLU/SUNLU PETG @base.json" - }, - { - "name": "Generic PHA @base", - "sub_path": "filament/Generic PHA @base.json" - }, - { - "name": "BETA PLA Basic @base", - "sub_path": "filament/BETA/BETA PLA Basic @base.json" - }, - { - "name": "BETA PLA Chameleon @base", - "sub_path": "filament/BETA/BETA PLA Chameleon @base.json" - }, - { - "name": "BETA PLA Fluorescence @base", - "sub_path": "filament/BETA/BETA PLA Fluorescence @base.json" - }, - { - "name": "BETA PLA Glitter @base", - "sub_path": "filament/BETA/BETA PLA Glitter @base.json" - }, - { - "name": "BETA PLA Glow @base", - "sub_path": "filament/BETA/BETA PLA Glow @base.json" - }, - { - "name": "BETA PLA Gradient @base", - "sub_path": "filament/BETA/BETA PLA Gradient @base.json" - }, - { - "name": "BETA PLA Heat Color Change @base", - "sub_path": "filament/BETA/BETA PLA Heat Color Change @base.json" - }, - { - "name": "BETA PLA High Speed @base", - "sub_path": "filament/BETA/BETA PLA High Speed @base.json" - }, - { - "name": "BETA PLA High Temp @base", - "sub_path": "filament/BETA/BETA PLA High Temp @base.json" - }, - { - "name": "BETA PLA Marble @base", - "sub_path": "filament/BETA/BETA PLA Marble @base.json" - }, - { - "name": "BETA PLA Matte @base", - "sub_path": "filament/BETA/BETA PLA Matte @base.json" - }, - { - "name": "BETA PLA Metal @base", - "sub_path": "filament/BETA/BETA PLA Metal @base.json" - }, - { - "name": "BETA PLA Metallic @base", - "sub_path": "filament/BETA/BETA PLA Metallic @base.json" - }, - { - "name": "BETA PLA PRO @base", - "sub_path": "filament/BETA/BETA PLA PRO @base.json" - }, - { - "name": "BETA PLA Silk @base", - "sub_path": "filament/BETA/BETA PLA Silk @base.json" - }, - { - "name": "BETA PLA Silk+ @base", - "sub_path": "filament/BETA/BETA PLA Silk+ @base.json" - }, - { - "name": "BETA PLA Transparent @base", - "sub_path": "filament/BETA/BETA PLA Transparent @base.json" - }, - { - "name": "BETA PLA UV Color Change @base", - "sub_path": "filament/BETA/BETA PLA UV Color Change @base.json" - }, - { - "name": "BETA PLA Wood @base", - "sub_path": "filament/BETA/BETA PLA Wood @base.json" - }, - { - "name": "BETA PLA Youth @base", - "sub_path": "filament/BETA/BETA PLA Youth @base.json" - }, - { - "name": "BETA PLA-CF @base", - "sub_path": "filament/BETA/BETA PLA-CF @base.json" - }, - { - "name": "Bambu PLA Aero @base", - "sub_path": "filament/Bambu PLA Aero @base.json" - }, - { - "name": "Bambu PLA Basic @base", - "sub_path": "filament/Bambu PLA Basic @base.json" - }, - { - "name": "Bambu PLA Dynamic @base", - "sub_path": "filament/Bambu PLA Dynamic @base.json" - }, - { - "name": "Bambu PLA Galaxy @base", - "sub_path": "filament/Bambu PLA Galaxy @base.json" - }, - { - "name": "Bambu PLA Glow @base", - "sub_path": "filament/Bambu PLA Glow @base.json" - }, - { - "name": "Bambu PLA Lite @base", - "sub_path": "filament/Bambu PLA Lite @base.json" - }, - { - "name": "Bambu PLA Marble @base", - "sub_path": "filament/Bambu PLA Marble @base.json" - }, - { - "name": "Bambu PLA Matte @base", - "sub_path": "filament/Bambu PLA Matte @base.json" - }, - { - "name": "Bambu PLA Metal @base", - "sub_path": "filament/Bambu PLA Metal @base.json" - }, - { - "name": "Bambu PLA Pure @base", - "sub_path": "filament/Bambu PLA Pure @base.json" - }, - { - "name": "Bambu PLA Silk @base", - "sub_path": "filament/Bambu PLA Silk @base.json" - }, - { - "name": "Bambu PLA Silk+ @base", - "sub_path": "filament/Bambu PLA Silk+ @base.json" - }, - { - "name": "Bambu PLA Sparkle @base", - "sub_path": "filament/Bambu PLA Sparkle @base.json" - }, - { - "name": "Bambu PLA Tough @base", - "sub_path": "filament/Bambu PLA Tough @base.json" - }, - { - "name": "Bambu PLA Tough+ @base", - "sub_path": "filament/Bambu PLA Tough+ @base.json" - }, - { - "name": "Bambu PLA Translucent @base", - "sub_path": "filament/Bambu PLA Translucent @base.json" - }, - { - "name": "Bambu PLA Wood @base", - "sub_path": "filament/Bambu PLA Wood @base.json" - }, - { - "name": "Bambu PLA-CF @base", - "sub_path": "filament/Bambu PLA-CF @base.json" - }, - { - "name": "Bambu Support For PLA @base", - "sub_path": "filament/Bambu Support For PLA @base.json" - }, - { - "name": "Bambu Support For PLA/PETG @base", - "sub_path": "filament/Bambu Support For PLA-PETG @base.json" - }, - { - "name": "Bambu Support W @base", - "sub_path": "filament/Bambu Support W @base.json" - }, - { - "name": "Generic PLA @base", - "sub_path": "filament/Generic PLA @base.json" - }, - { - "name": "Generic PLA High Speed @base", - "sub_path": "filament/Generic PLA High Speed @base.json" - }, - { - "name": "Generic PLA Silk @base", - "sub_path": "filament/Generic PLA Silk @base.json" - }, - { - "name": "Generic PLA-CF @base", - "sub_path": "filament/Generic PLA-CF @base.json" - }, - { - "name": "Numakers PLA+ @base", - "sub_path": "filament/Numakers/Numakers PLA+ @base.json" - }, - { - "name": "Overture Matte PLA @base", - "sub_path": "filament/Overture/Overture Matte PLA @base.json" - }, - { - "name": "Overture PLA @base", - "sub_path": "filament/Overture/Overture PLA @base.json" - }, - { - "name": "Overture PLA Pro @base", - "sub_path": "filament/Overture/Overture PLA Pro @base.json" - }, - { - "name": "Panchroma CoPE @base", - "sub_path": "filament/Polymaker/Panchroma CoPE @base.json" - }, - { - "name": "Panchroma PLA @base", - "sub_path": "filament/Polymaker/Panchroma PLA @base.json" - }, - { - "name": "Panchroma PLA Celestial @base", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @base.json" - }, - { - "name": "Panchroma PLA Galaxy @base", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @base.json" - }, - { - "name": "Panchroma PLA Glow @base", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @base.json" - }, - { - "name": "Panchroma PLA Luminous @base", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @base.json" - }, - { - "name": "Panchroma PLA Marble @base", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @base.json" - }, - { - "name": "Panchroma PLA Matte @base", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @base.json" - }, - { - "name": "Panchroma PLA Metallic @base", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @base.json" - }, - { - "name": "Panchroma PLA Neon @base", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @base.json" - }, - { - "name": "Panchroma PLA Satin @base", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @base.json" - }, - { - "name": "Panchroma PLA Silk @base", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @base.json" - }, - { - "name": "Panchroma PLA Starlight @base", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @base.json" - }, - { - "name": "Panchroma PLA Temp Shift @base", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @base.json" - }, - { - "name": "Panchroma PLA Translucent @base", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @base.json" - }, - { - "name": "Panchroma PLA UV Shift @base", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @base.json" - }, - { - "name": "PolyLite CosPLA @base", - "sub_path": "filament/Polymaker/PolyLite CosPLA @base.json" - }, - { - "name": "PolyLite PLA @base", - "sub_path": "filament/Polymaker/PolyLite PLA @base.json" - }, - { - "name": "PolyLite PLA Galaxy @base", - "sub_path": "filament/Polymaker/PolyLite PLA Galaxy @base.json" - }, - { - "name": "PolyLite PLA Glow @base", - "sub_path": "filament/Polymaker/PolyLite PLA Glow @base.json" - }, - { - "name": "PolyLite PLA Luminous @base", - "sub_path": "filament/Polymaker/PolyLite PLA Luminous @base.json" - }, - { - "name": "PolyLite PLA Neon @base", - "sub_path": "filament/Polymaker/PolyLite PLA Neon @base.json" - }, - { - "name": "PolyLite PLA Pro @base", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @base.json" - }, - { - "name": "PolyLite PLA Starlight @base", - "sub_path": "filament/Polymaker/PolyLite PLA Starlight @base.json" - }, - { - "name": "PolyLite PLA Translucent @base", - "sub_path": "filament/Polymaker/PolyLite PLA Translucent @base.json" - }, - { - "name": "PolyTerra PLA @base", - "sub_path": "filament/Polymaker/PolyTerra PLA @base.json" - }, - { - "name": "PolyTerra PLA Marble @base", - "sub_path": "filament/Polymaker/PolyTerra PLA Marble @base.json" - }, - { - "name": "PolyTerra PLA+ @base", - "sub_path": "filament/Polymaker/PolyTerra PLA+ @base.json" - }, - { - "name": "Polymaker HT-PLA @base", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @base.json" - }, - { - "name": "Polymaker HT-PLA-GF @base", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @base.json" - }, - { - "name": "SUNLU PLA Marble @base", - "sub_path": "filament/SUNLU/SUNLU Marble PLA @base.json" - }, - { - "name": "SUNLU PLA Matte @base", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @base.json" - }, - { - "name": "SUNLU PLA+ 2.0 @base", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @base.json" - }, - { - "name": "SUNLU PLA+ @base", - "sub_path": "filament/SUNLU/SUNLU PLA+ @base.json" - }, - { - "name": "SUNLU Silk PLA+ @base", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @base.json" - }, - { - "name": "SUNLU Wood PLA @base", - "sub_path": "filament/SUNLU/SUNLU Wood PLA @base.json" - }, - { - "name": "eSUN PLA+ @base", - "sub_path": "filament/eSUN/eSUN PLA+ @base.json" - }, - { - "name": "Generic PP @base", - "sub_path": "filament/Generic PP @base.json" - }, - { - "name": "Generic PP-CF @base", - "sub_path": "filament/Generic PP-CF @base.json" - }, - { - "name": "Generic PP-GF @base", - "sub_path": "filament/Generic PP-GF @base.json" - }, - { - "name": "Bambu PPA-CF @base", - "sub_path": "filament/Bambu PPA-CF @base.json" - }, - { - "name": "Generic PPA-CF @base", - "sub_path": "filament/Generic PPA-CF @base.json" - }, - { - "name": "Generic PPA-GF @base", - "sub_path": "filament/Generic PPA-GF @base.json" - }, - { - "name": "Bambu PPS-CF @base", - "sub_path": "filament/Bambu PPS-CF @base.json" - }, - { - "name": "Generic PPS @base", - "sub_path": "filament/Generic PPS @base.json" - }, - { - "name": "Generic PPS-CF @base", - "sub_path": "filament/Generic PPS-CF @base.json" - }, - { - "name": "Bambu PVA @base", - "sub_path": "filament/Bambu PVA @base.json" - }, - { - "name": "Generic PVA @base", - "sub_path": "filament/Generic PVA @base.json" - }, - { - "name": "Generic SBS @base", - "sub_path": "filament/Generic SBS @base.json" - }, - { - "name": "BETA PEBA 90A @base", - "sub_path": "filament/BETA/BETA PEBA 90A @base.json" - }, - { - "name": "BETA TPU 90A @base", - "sub_path": "filament/BETA/BETA TPU 90A @base.json" - }, - { - "name": "BETA TPU 95A @base", - "sub_path": "filament/BETA/BETA TPU 95A @base.json" - }, - { - "name": "BETA TPU 98A @base", - "sub_path": "filament/BETA/BETA TPU 98A @base.json" - }, - { - "name": "BETA TPU Matte @base", - "sub_path": "filament/BETA/BETA TPU Matte @base.json" - }, - { - "name": "Bambu TPU 85A @base", - "sub_path": "filament/Bambu TPU 85A @base.json" - }, - { - "name": "Bambu TPU 90A @base", - "sub_path": "filament/Bambu TPU 90A @base.json" - }, - { - "name": "Bambu TPU 95A @base", - "sub_path": "filament/Bambu TPU 95A @base.json" - }, - { - "name": "Bambu TPU 95A HF @base", - "sub_path": "filament/Bambu TPU 95A HF @base.json" - }, - { - "name": "Bambu TPU for AMS @base", - "sub_path": "filament/Bambu TPU for AMS @base.json" - }, - { - "name": "Generic TPU @base", - "sub_path": "filament/Generic TPU @base.json" - }, - { - "name": "Generic TPU for AMS @base", - "sub_path": "filament/Generic TPU for AMS @base.json" - }, - { - "name": "BETA ABS @BBL A1", - "sub_path": "filament/BETA/BETA ABS @BBL A1.json" - }, - { - "name": "BETA ABS @BBL H2D", - "sub_path": "filament/BETA/BETA ABS @BBL H2D.json" - }, - { - "name": "BETA ABS @BBL P1P", - "sub_path": "filament/BETA/BETA ABS @BBL P1P.json" - }, - { - "name": "BETA ABS @BBL X1C", - "sub_path": "filament/BETA/BETA ABS @BBL X1C.json" - }, - { - "name": "Bambu ABS @BBL A1", - "sub_path": "filament/Bambu ABS @BBL A1.json" - }, - { - "name": "Bambu ABS @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2C", - "sub_path": "filament/Bambu ABS @BBL H2C.json" - }, - { - "name": "Bambu ABS @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2C 0.6 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2C 0.6 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2C 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2C 0.8 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2D", - "sub_path": "filament/Bambu ABS @BBL H2D.json" - }, - { - "name": "Bambu ABS @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2DP", - "sub_path": "filament/Bambu ABS @BBL H2DP.json" - }, - { - "name": "Bambu ABS @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2S", - "sub_path": "filament/Bambu ABS @BBL H2S.json" - }, - { - "name": "Bambu ABS @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu ABS @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu ABS @BBL P1P", - "sub_path": "filament/P1P/Bambu ABS @BBL P1P.json" - }, - { - "name": "Bambu ABS @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL P2S", - "sub_path": "filament/Bambu ABS @BBL P2S.json" - }, - { - "name": "Bambu ABS @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu ABS @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu ABS @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu ABS @BBL X1C", - "sub_path": "filament/Bambu ABS @BBL X1C.json" - }, - { - "name": "Bambu ABS @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu ABS @BBL X1E", - "sub_path": "filament/Bambu ABS @BBL X1E.json" - }, - { - "name": "Bambu ABS @BBL X1E 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL X1E 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL X1E 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL X1E 0.8 nozzle.json" - }, - { - "name": "Bambu ABS @BBL X2D", - "sub_path": "filament/Bambu ABS @BBL X2D.json" - }, - { - "name": "Bambu ABS @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu ABS @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu ABS @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu ABS @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu ABS @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu ABS @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Bambu ABS-GF @BBL A1", - "sub_path": "filament/Bambu ABS-GF @BBL A1.json" - }, - { - "name": "Bambu ABS-GF @BBL H2C", - "sub_path": "filament/Bambu ABS-GF @BBL H2C.json" - }, - { - "name": "Bambu ABS-GF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu ABS-GF @BBL H2D", - "sub_path": "filament/Bambu ABS-GF @BBL H2D.json" - }, - { - "name": "Bambu ABS-GF @BBL H2DP", - "sub_path": "filament/Bambu ABS-GF @BBL H2DP.json" - }, - { - "name": "Bambu ABS-GF @BBL H2S", - "sub_path": "filament/Bambu ABS-GF @BBL H2S.json" - }, - { - "name": "Bambu ABS-GF @BBL P1P", - "sub_path": "filament/Bambu ABS-GF @BBL P1P.json" - }, - { - "name": "Bambu ABS-GF @BBL P2S", - "sub_path": "filament/Bambu ABS-GF @BBL P2S.json" - }, - { - "name": "Bambu ABS-GF @BBL X1C", - "sub_path": "filament/Bambu ABS-GF @BBL X1C.json" - }, - { - "name": "Bambu ABS-GF @BBL X2D", - "sub_path": "filament/Bambu ABS-GF @BBL X2D.json" - }, - { - "name": "Bambu ABS-GF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu Support for ABS @BBL A1", - "sub_path": "filament/Bambu Support for ABS @BBL A1.json" - }, - { - "name": "Bambu Support for ABS @BBL H2C", - "sub_path": "filament/Bambu Support for ABS @BBL H2C.json" - }, - { - "name": "Bambu Support for ABS @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu Support for ABS @BBL H2D", - "sub_path": "filament/Bambu Support for ABS @BBL H2D.json" - }, - { - "name": "Bambu Support for ABS @BBL H2DP", - "sub_path": "filament/Bambu Support for ABS @BBL H2DP.json" - }, - { - "name": "Bambu Support for ABS @BBL H2S", - "sub_path": "filament/Bambu Support for ABS @BBL H2S.json" - }, - { - "name": "Bambu Support for ABS @BBL P2S", - "sub_path": "filament/Bambu Support for ABS @BBL P2S.json" - }, - { - "name": "Bambu Support for ABS @BBL X1C", - "sub_path": "filament/Bambu Support for ABS @BBL X1C.json" - }, - { - "name": "Bambu Support for ABS @BBL X2D", - "sub_path": "filament/Bambu Support for ABS @BBL X2D.json" - }, - { - "name": "Bambu Support for ABS @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic ABS", - "sub_path": "filament/Generic ABS.json" - }, - { - "name": "Generic ABS @0.2 nozzle", - "sub_path": "filament/Generic ABS @0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL A1", - "sub_path": "filament/Generic ABS @BBL A1.json" - }, - { - "name": "Generic ABS @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL H2C", - "sub_path": "filament/Generic ABS @BBL H2C.json" - }, - { - "name": "Generic ABS @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic ABS @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic ABS @BBL H2D", - "sub_path": "filament/Generic ABS @BBL H2D.json" - }, - { - "name": "Generic ABS @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic ABS @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic ABS @BBL P1P", - "sub_path": "filament/P1P/Generic ABS @BBL P1P.json" - }, - { - "name": "Generic ABS @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL P2S", - "sub_path": "filament/Generic ABS @BBL P2S.json" - }, - { - "name": "Generic ABS @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL X2D", - "sub_path": "filament/Generic ABS @BBL X2D.json" - }, - { - "name": "Generic ABS @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth ABS rABS", - "sub_path": "filament/addnorth/addnorth ABS rABS.json" - }, - { - "name": "PolyLite ABS @BBL A1", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL A1.json" - }, - { - "name": "PolyLite ABS @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL A1 0.2 nozzle.json" - }, - { - "name": "PolyLite ABS @BBL H2D", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL H2D.json" - }, - { - "name": "PolyLite ABS @BBL H2D 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json" - }, - { - "name": "PolyLite ABS @BBL H2DP", - "sub_path": "filament/PolyLite ABS @BBL H2DP.json" - }, - { - "name": "PolyLite ABS @BBL H2DP 0.2 nozzle", - "sub_path": "filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "PolyLite ABS @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL P1P.json" - }, - { - "name": "PolyLite ABS @BBL X1C", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1C.json" - }, - { - "name": "PolyLite ABS @BBL X1E", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1E.json" - }, - { - "name": "PolyLite ABS @BBL X1E 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1E 0.2 nozzle.json" - }, - { - "name": "BETA ASA @BBL A1 0.4 nozzle", - "sub_path": "filament/BETA/BETA ASA @BBL A1 0.4 nozzle.json" - }, - { - "name": "BETA ASA @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA ASA @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA ASA @BBL X1C 0.4 nozzle", - "sub_path": "filament/BETA/BETA ASA @BBL X1C 0.4 nozzle.json" - }, - { - "name": "Bambu ASA @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL A1 0.4 nozzle", - "sub_path": "filament/Bambu ASA @BBL A1 0.4 nozzle.json" - }, - { - "name": "Bambu ASA @BBL A1 0.6 nozzle", - "sub_path": "filament/Bambu ASA @BBL A1 0.6 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2C", - "sub_path": "filament/Bambu ASA @BBL H2C.json" - }, - { - "name": "Bambu ASA @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2C 0.6 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2C 0.6 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2C 0.8 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2C 0.8 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2S", - "sub_path": "filament/Bambu ASA @BBL H2S.json" - }, - { - "name": "Bambu ASA @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu ASA @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu ASA @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu ASA @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu ASA @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu ASA @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu ASA @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu ASA @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu ASA @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X1 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X1 0.6 nozzle", - "sub_path": "filament/Bambu ASA @BBL X1 0.6 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X1C", - "sub_path": "filament/Bambu ASA @BBL X1C.json" - }, - { - "name": "Bambu ASA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X1C 0.4 nozzle", - "sub_path": "filament/Bambu ASA @BBL X1C 0.4 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X1E", - "sub_path": "filament/Bambu ASA @BBL X1E.json" - }, - { - "name": "Bambu ASA @BBL X1E 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL X1E 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X1E 0.4 nozzle", - "sub_path": "filament/Bambu ASA @BBL X1E 0.4 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X2D", - "sub_path": "filament/Bambu ASA @BBL X2D.json" - }, - { - "name": "Bambu ASA @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu ASA @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu ASA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu ASA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu ASA-Aero @BBL A1", - "sub_path": "filament/Bambu ASA-Aero @BBL A1.json" - }, - { - "name": "Bambu ASA-Aero @BBL H2C", - "sub_path": "filament/Bambu ASA-Aero @BBL H2C.json" - }, - { - "name": "Bambu ASA-Aero @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu ASA-Aero @BBL H2D", - "sub_path": "filament/Bambu ASA-Aero @BBL H2D.json" - }, - { - "name": "Bambu ASA-Aero @BBL H2DP", - "sub_path": "filament/Bambu ASA-Aero @BBL H2DP.json" - }, - { - "name": "Bambu ASA-Aero @BBL H2S", - "sub_path": "filament/Bambu ASA-Aero @BBL H2S.json" - }, - { - "name": "Bambu ASA-Aero @BBL P1P", - "sub_path": "filament/Bambu ASA-Aero @BBL P1P.json" - }, - { - "name": "Bambu ASA-Aero @BBL P2S", - "sub_path": "filament/Bambu ASA-Aero @BBL P2S.json" - }, - { - "name": "Bambu ASA-Aero @BBL X1C", - "sub_path": "filament/Bambu ASA-Aero @BBL X1C.json" - }, - { - "name": "Bambu ASA-Aero @BBL X2D", - "sub_path": "filament/Bambu ASA-Aero @BBL X2D.json" - }, - { - "name": "Bambu ASA-Aero @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL A1", - "sub_path": "filament/Bambu ASA-CF @BBL A1.json" - }, - { - "name": "Bambu ASA-CF @BBL A1 0.6 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL H2C", - "sub_path": "filament/Bambu ASA-CF @BBL H2C.json" - }, - { - "name": "Bambu ASA-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL H2S", - "sub_path": "filament/Bambu ASA-CF @BBL H2S.json" - }, - { - "name": "Bambu ASA-CF @BBL P1P", - "sub_path": "filament/Bambu ASA-CF @BBL P1P.json" - }, - { - "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL X1C", - "sub_path": "filament/Bambu ASA-CF @BBL X1C.json" - }, - { - "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json" - }, - { - "name": "Bambu ASA-CF @BBL X2D", - "sub_path": "filament/Bambu ASA-CF @BBL X2D.json" - }, - { - "name": "Bambu ASA-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic ASA", - "sub_path": "filament/Generic ASA.json" - }, - { - "name": "Generic ASA @0.2 nozzle", - "sub_path": "filament/Generic ASA @0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL A1", - "sub_path": "filament/Generic ASA @BBL A1.json" - }, - { - "name": "Generic ASA @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL H2C", - "sub_path": "filament/Generic ASA @BBL H2C.json" - }, - { - "name": "Generic ASA @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic ASA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic ASA @BBL H2D", - "sub_path": "filament/Generic ASA @BBL H2D.json" - }, - { - "name": "Generic ASA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic ASA @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic ASA @BBL P1P", - "sub_path": "filament/P1P/Generic ASA @BBL P1P.json" - }, - { - "name": "Generic ASA @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL P2S", - "sub_path": "filament/Generic ASA @BBL P2S.json" - }, - { - "name": "Generic ASA @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL X2D", - "sub_path": "filament/Generic ASA @BBL X2D.json" - }, - { - "name": "Generic ASA @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic ASA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "PolyLite ASA @BBL A1", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL A1.json" - }, - { - "name": "PolyLite ASA @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL A1 0.2 nozzle.json" - }, - { - "name": "PolyLite ASA @BBL H2D", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL H2D.json" - }, - { - "name": "PolyLite ASA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "PolyLite ASA @BBL H2DP", - "sub_path": "filament/PolyLite ASA @BBL H2DP.json" - }, - { - "name": "PolyLite ASA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "PolyLite ASA @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL P1P.json" - }, - { - "name": "PolyLite ASA @BBL X1C", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1C.json" - }, - { - "name": "PolyLite ASA @BBL X1E", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1E.json" - }, - { - "name": "Generic BVOH @BBL A1", - "sub_path": "filament/Generic BVOH @BBL A1.json" - }, - { - "name": "Generic BVOH @BBL A1M", - "sub_path": "filament/Generic BVOH @BBL A1M.json" - }, - { - "name": "Generic BVOH @BBL A2L", - "sub_path": "filament/Generic BVOH @BBL A2L.json" - }, - { - "name": "Generic BVOH @BBL H2C", - "sub_path": "filament/Generic BVOH @BBL H2C.json" - }, - { - "name": "Generic BVOH @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic BVOH @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic BVOH @BBL H2D", - "sub_path": "filament/Generic BVOH @BBL H2D.json" - }, - { - "name": "Generic BVOH @BBL H2DP", - "sub_path": "filament/Generic BVOH @BBL H2DP.json" - }, - { - "name": "Generic BVOH @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic BVOH @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic BVOH @BBL P2S", - "sub_path": "filament/Generic BVOH @BBL P2S.json" - }, - { - "name": "Generic BVOH @BBL X1C", - "sub_path": "filament/Generic BVOH @BBL X1C.json" - }, - { - "name": "Generic BVOH @BBL X2D", - "sub_path": "filament/Generic BVOH @BBL X2D.json" - }, - { - "name": "Generic BVOH @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic BVOH @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic EVA @BBL A1", - "sub_path": "filament/Generic EVA @BBL A1.json" - }, - { - "name": "Generic EVA @BBL A1M", - "sub_path": "filament/Generic EVA @BBL A1M.json" - }, - { - "name": "Generic EVA @BBL A2L", - "sub_path": "filament/Generic EVA @BBL A2L.json" - }, - { - "name": "Generic EVA @BBL H2C", - "sub_path": "filament/Generic EVA @BBL H2C.json" - }, - { - "name": "Generic EVA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic EVA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic EVA @BBL H2D", - "sub_path": "filament/Generic EVA @BBL H2D.json" - }, - { - "name": "Generic EVA @BBL H2DP", - "sub_path": "filament/Generic EVA @BBL H2DP.json" - }, - { - "name": "Generic EVA @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic EVA @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic EVA @BBL P2S", - "sub_path": "filament/Generic EVA @BBL P2S.json" - }, - { - "name": "Generic EVA @BBL X1C", - "sub_path": "filament/Generic EVA @BBL X1C.json" - }, - { - "name": "Generic EVA @BBL X2D", - "sub_path": "filament/Generic EVA @BBL X2D.json" - }, - { - "name": "Generic EVA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic EVA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "BETA HIPS @BBL H2D", - "sub_path": "filament/BETA/BETA HIPS @BBL H2D.json" - }, - { - "name": "BETA HIPS @BBL X1C", - "sub_path": "filament/BETA/BETA HIPS @BBL X1C.json" - }, - { - "name": "Generic HIPS @BBL A1", - "sub_path": "filament/Generic HIPS @BBL A1.json" - }, - { - "name": "Generic HIPS @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL A1M", - "sub_path": "filament/Generic HIPS @BBL A1M.json" - }, - { - "name": "Generic HIPS @BBL A1M 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL A2L", - "sub_path": "filament/Generic HIPS @BBL A2L.json" - }, - { - "name": "Generic HIPS @BBL A2L 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL H2C", - "sub_path": "filament/Generic HIPS @BBL H2C.json" - }, - { - "name": "Generic HIPS @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic HIPS @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic HIPS @BBL H2D", - "sub_path": "filament/Generic HIPS @BBL H2D.json" - }, - { - "name": "Generic HIPS @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL H2DP", - "sub_path": "filament/Generic HIPS @BBL H2DP.json" - }, - { - "name": "Generic HIPS @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic HIPS @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic HIPS @BBL P2S", - "sub_path": "filament/Generic HIPS @BBL P2S.json" - }, - { - "name": "Generic HIPS @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL X1C", - "sub_path": "filament/Generic HIPS @BBL X1C.json" - }, - { - "name": "Generic HIPS @BBL X1C 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL X2D", - "sub_path": "filament/Generic HIPS @BBL X2D.json" - }, - { - "name": "Generic HIPS @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic HIPS @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic HIPS @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic HIPS @BBL X2D 0.4 nozzle.json" - }, - { - "name": "BETA PAHT-CF @BBL H2D", - "sub_path": "filament/BETA/BETA PAHT-CF @BBL H2D.json" - }, - { - "name": "BETA PAHT-CF @BBL P1P", - "sub_path": "filament/BETA/BETA PAHT-CF @BBL P1P.json" - }, - { - "name": "BETA PAHT-CF @BBL X1C", - "sub_path": "filament/BETA/BETA PAHT-CF @BBL X1C.json" - }, - { - "name": "Bambu PA-CF @BBL A1", - "sub_path": "filament/Bambu PA-CF @BBL A1.json" - }, - { - "name": "Bambu PA-CF @BBL H2C", - "sub_path": "filament/Bambu PA-CF @BBL H2C.json" - }, - { - "name": "Bambu PA-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PA-CF @BBL H2D", - "sub_path": "filament/Bambu PA-CF @BBL H2D.json" - }, - { - "name": "Bambu PA-CF @BBL H2DP", - "sub_path": "filament/Bambu PA-CF @BBL H2DP.json" - }, - { - "name": "Bambu PA-CF @BBL H2S", - "sub_path": "filament/Bambu PA-CF @BBL H2S.json" - }, - { - "name": "Bambu PA-CF @BBL P1P", - "sub_path": "filament/P1P/Bambu PA-CF @BBL P1P.json" - }, - { - "name": "Bambu PA-CF @BBL P2S", - "sub_path": "filament/Bambu PA-CF @BBL P2S.json" - }, - { - "name": "Bambu PA-CF @BBL X1C", - "sub_path": "filament/Bambu PA-CF @BBL X1C.json" - }, - { - "name": "Bambu PA-CF @BBL X1E", - "sub_path": "filament/Bambu PA-CF @BBL X1E.json" - }, - { - "name": "Bambu PA-CF @BBL X2D", - "sub_path": "filament/Bambu PA-CF @BBL X2D.json" - }, - { - "name": "Bambu PA-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PA6-CF @BBL A1", - "sub_path": "filament/Bambu PA6-CF @BBL A1.json" - }, - { - "name": "Bambu PA6-CF @BBL H2C", - "sub_path": "filament/Bambu PA6-CF @BBL H2C.json" - }, - { - "name": "Bambu PA6-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PA6-CF @BBL H2D", - "sub_path": "filament/Bambu PA6-CF @BBL H2D.json" - }, - { - "name": "Bambu PA6-CF @BBL H2DP", - "sub_path": "filament/Bambu PA6-CF @BBL H2DP.json" - }, - { - "name": "Bambu PA6-CF @BBL H2S", - "sub_path": "filament/Bambu PA6-CF @BBL H2S.json" - }, - { - "name": "Bambu PA6-CF @BBL P2S", - "sub_path": "filament/Bambu PA6-CF @BBL P2S.json" - }, - { - "name": "Bambu PA6-CF @BBL X1C", - "sub_path": "filament/Bambu PA6-CF @BBL X1C.json" - }, - { - "name": "Bambu PA6-CF @BBL X1E", - "sub_path": "filament/Bambu PA6-CF @BBL X1E.json" - }, - { - "name": "Bambu PA6-CF @BBL X2D", - "sub_path": "filament/Bambu PA6-CF @BBL X2D.json" - }, - { - "name": "Bambu PA6-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PA6-GF @BBL A1", - "sub_path": "filament/Bambu PA6-GF @BBL A1.json" - }, - { - "name": "Bambu PA6-GF @BBL H2C", - "sub_path": "filament/Bambu PA6-GF @BBL H2C.json" - }, - { - "name": "Bambu PA6-GF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PA6-GF @BBL H2D", - "sub_path": "filament/Bambu PA6-GF @BBL H2D.json" - }, - { - "name": "Bambu PA6-GF @BBL H2DP", - "sub_path": "filament/Bambu PA6-GF @BBL H2DP.json" - }, - { - "name": "Bambu PA6-GF @BBL H2S", - "sub_path": "filament/Bambu PA6-GF @BBL H2S.json" - }, - { - "name": "Bambu PA6-GF @BBL P1P", - "sub_path": "filament/Bambu PA6-GF @BBL P1P.json" - }, - { - "name": "Bambu PA6-GF @BBL P2S", - "sub_path": "filament/Bambu PA6-GF @BBL P2S.json" - }, - { - "name": "Bambu PA6-GF @BBL X1C", - "sub_path": "filament/Bambu PA6-GF @BBL X1C.json" - }, - { - "name": "Bambu PA6-GF @BBL X2D", - "sub_path": "filament/Bambu PA6-GF @BBL X2D.json" - }, - { - "name": "Bambu PA6-GF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PAHT-CF @BBL A1", - "sub_path": "filament/Bambu PAHT-CF @BBL A1.json" - }, - { - "name": "Bambu PAHT-CF @BBL H2C", - "sub_path": "filament/Bambu PAHT-CF @BBL H2C.json" - }, - { - "name": "Bambu PAHT-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PAHT-CF @BBL H2D", - "sub_path": "filament/Bambu PAHT-CF @BBL H2D.json" - }, - { - "name": "Bambu PAHT-CF @BBL H2DP", - "sub_path": "filament/Bambu PAHT-CF @BBL H2DP.json" - }, - { - "name": "Bambu PAHT-CF @BBL H2S", - "sub_path": "filament/Bambu PAHT-CF @BBL H2S.json" - }, - { - "name": "Bambu PAHT-CF @BBL P1P", - "sub_path": "filament/P1P/Bambu PAHT-CF @BBL P1P.json" - }, - { - "name": "Bambu PAHT-CF @BBL P2S", - "sub_path": "filament/Bambu PAHT-CF @BBL P2S.json" - }, - { - "name": "Bambu PAHT-CF @BBL X1C", - "sub_path": "filament/Bambu PAHT-CF @BBL X1C.json" - }, - { - "name": "Bambu PAHT-CF @BBL X2D", - "sub_path": "filament/Bambu PAHT-CF @BBL X2D.json" - }, - { - "name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu Support For PA/PET @BBL A1", - "sub_path": "filament/Bambu Support For PA PET @BBL A1.json" - }, - { - "name": "Bambu Support For PA/PET @BBL H2C", - "sub_path": "filament/Bambu Support For PA PET @BBL H2C.json" - }, - { - "name": "Bambu Support For PA/PET @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu Support For PA/PET @BBL H2D", - "sub_path": "filament/Bambu Support For PA PET @BBL H2D.json" - }, - { - "name": "Bambu Support For PA/PET @BBL H2DP", - "sub_path": "filament/Bambu Support For PA PET @BBL H2DP.json" - }, - { - "name": "Bambu Support For PA/PET @BBL H2S", - "sub_path": "filament/Bambu Support For PA PET @BBL H2S.json" - }, - { - "name": "Bambu Support For PA/PET @BBL P1P", - "sub_path": "filament/P1P/Bambu Support For PA PET @BBL P1P.json" - }, - { - "name": "Bambu Support For PA/PET @BBL P2S", - "sub_path": "filament/Bambu Support For PA PET @BBL P2S.json" - }, - { - "name": "Bambu Support For PA/PET @BBL X1C", - "sub_path": "filament/Bambu Support For PA PET @BBL X1C.json" - }, - { - "name": "Bambu Support For PA/PET @BBL X2D", - "sub_path": "filament/Bambu Support For PA PET @BBL X2D.json" - }, - { - "name": "Bambu Support For PA/PET @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu Support G @BBL A1", - "sub_path": "filament/Bambu Support G @BBL A1.json" - }, - { - "name": "Bambu Support G @BBL H2C", - "sub_path": "filament/Bambu Support G @BBL H2C.json" - }, - { - "name": "Bambu Support G @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu Support G @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu Support G @BBL H2D", - "sub_path": "filament/Bambu Support G @BBL H2D.json" - }, - { - "name": "Bambu Support G @BBL H2DP", - "sub_path": "filament/Bambu Support G @BBL H2DP.json" - }, - { - "name": "Bambu Support G @BBL H2S", - "sub_path": "filament/Bambu Support G @BBL H2S.json" - }, - { - "name": "Bambu Support G @BBL P1P", - "sub_path": "filament/P1P/Bambu Support G @BBL P1P.json" - }, - { - "name": "Bambu Support G @BBL P2S", - "sub_path": "filament/Bambu Support G @BBL P2S.json" - }, - { - "name": "Bambu Support G @BBL X1C", - "sub_path": "filament/Bambu Support G @BBL X1C.json" - }, - { - "name": "Bambu Support G @BBL X1E", - "sub_path": "filament/Bambu Support G @BBL X1E.json" - }, - { - "name": "Bambu Support G @BBL X2D", - "sub_path": "filament/Bambu Support G @BBL X2D.json" - }, - { - "name": "Bambu Support G @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu Support G @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Fiberon PA12-CF @BBL H2D", - "sub_path": "filament/Polymaker/Fiberon PA12-CF @BBL H2D.json" - }, - { - "name": "Fiberon PA12-CF @BBL X1C", - "sub_path": "filament/Polymaker/Fiberon PA12-CF @BBL X1C.json" - }, - { - "name": "Fiberon PA12-CF10 @BBL X1", - "sub_path": "filament/Polymaker/Fiberon PA12-CF10 @BBL X1.json" - }, - { - "name": "Fiberon PA6-CF @BBL H2D", - "sub_path": "filament/Polymaker/Fiberon PA6-CF @BBL H2D.json" - }, - { - "name": "Fiberon PA6-CF @BBL X1C", - "sub_path": "filament/Polymaker/Fiberon PA6-CF @BBL X1C.json" - }, - { - "name": "Fiberon PA6-CF20 @BBL X1", - "sub_path": "filament/Polymaker/Fiberon PA6-CF20 @BBL X1.json" - }, - { - "name": "Fiberon PA6-GF @BBL H2D", - "sub_path": "filament/Polymaker/Fiberon PA6-GF @BBL H2D.json" - }, - { - "name": "Fiberon PA6-GF @BBL X1C", - "sub_path": "filament/Polymaker/Fiberon PA6-GF @BBL X1C.json" - }, - { - "name": "Fiberon PA6-GF25 @BBL X1", - "sub_path": "filament/Polymaker/Fiberon PA6-GF25 @BBL X1.json" - }, - { - "name": "Fiberon PA612-CF @BBL H2D", - "sub_path": "filament/Polymaker/Fiberon PA612-CF @BBL H2D.json" - }, - { - "name": "Fiberon PA612-CF @BBL X1C", - "sub_path": "filament/Polymaker/Fiberon PA612-CF @BBL X1C.json" - }, - { - "name": "Fiberon PA612-CF15 @BBL X1", - "sub_path": "filament/Polymaker/Fiberon PA612-CF15 @BBL X1.json" - }, - { - "name": "Generic PA", - "sub_path": "filament/Generic PA.json" - }, - { - "name": "Generic PA @BBL H2C", - "sub_path": "filament/Generic PA @BBL H2C.json" - }, - { - "name": "Generic PA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PA @BBL H2D", - "sub_path": "filament/Generic PA @BBL H2D.json" - }, - { - "name": "Generic PA @BBL H2DP", - "sub_path": "filament/Generic PA @BBL H2DP.json" - }, - { - "name": "Generic PA @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PA @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PA @BBL P1P", - "sub_path": "filament/P1P/Generic PA @BBL P1P.json" - }, - { - "name": "Generic PA @BBL P2S", - "sub_path": "filament/Generic PA @BBL P2S.json" - }, - { - "name": "Generic PA @BBL X2D", - "sub_path": "filament/Generic PA @BBL X2D.json" - }, - { - "name": "Generic PA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PA Adura", - "sub_path": "filament/addnorth/addnorth PA Adura.json" - }, - { - "name": "addnorth PA Adura FDA", - "sub_path": "filament/addnorth/addnorth PA Adura FDA.json" - }, - { - "name": "addnorth PA6 Addlantis", - "sub_path": "filament/addnorth/addnorth PA6 Addlantis.json" - }, - { - "name": "addnorth PVDF Adamant S1", - "sub_path": "filament/addnorth/addnorth PVDF Adamant S1.json" - }, - { - "name": "Generic PA-CF", - "sub_path": "filament/Generic PA-CF.json" - }, - { - "name": "Generic PA-CF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PA-CF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PA-CF @BBL P1P", - "sub_path": "filament/P1P/Generic PA-CF @BBL P1P.json" - }, - { - "name": "Generic PA-CF @BBL P2S", - "sub_path": "filament/Generic PA-CF @BBL P2S.json" - }, - { - "name": "Generic PA-CF @BBL X2D", - "sub_path": "filament/Generic PA-CF @BBL X2D.json" - }, - { - "name": "Generic PA-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PA-CF Adura X", - "sub_path": "filament/addnorth/addnorth PA-CF Adura X.json" - }, - { - "name": "Bambu PC @BBL A1", - "sub_path": "filament/Bambu PC @BBL A1.json" - }, - { - "name": "Bambu PC @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2C", - "sub_path": "filament/Bambu PC @BBL H2C.json" - }, - { - "name": "Bambu PC @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2C 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL H2C 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2C 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL H2C 0.8 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu PC @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PC @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2S", - "sub_path": "filament/Bambu PC @BBL H2S.json" - }, - { - "name": "Bambu PC @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu PC @BBL P1P", - "sub_path": "filament/P1P/Bambu PC @BBL P1P.json" - }, - { - "name": "Bambu PC @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PC @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PC @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PC @BBL X1C", - "sub_path": "filament/Bambu PC @BBL X1C.json" - }, - { - "name": "Bambu PC @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL X1C 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL X1C 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PC @BBL X1E", - "sub_path": "filament/Bambu PC @BBL X1E.json" - }, - { - "name": "Bambu PC @BBL X1E 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL X1E 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL X1E 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL X1E 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL X1E 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL X1E 0.8 nozzle.json" - }, - { - "name": "Bambu PC @BBL X2D", - "sub_path": "filament/Bambu PC @BBL X2D.json" - }, - { - "name": "Bambu PC @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PC @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PC @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL A1", - "sub_path": "filament/Bambu PC FR @BBL A1.json" - }, - { - "name": "Bambu PC FR @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2C", - "sub_path": "filament/Bambu PC FR @BBL H2C.json" - }, - { - "name": "Bambu PC FR @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL H2S", - "sub_path": "filament/Bambu PC FR @BBL H2S.json" - }, - { - "name": "Bambu PC FR @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL P1P", - "sub_path": "filament/Bambu PC FR @BBL P1P.json" - }, - { - "name": "Bambu PC FR @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL P1S", - "sub_path": "filament/Bambu PC FR @BBL P1S.json" - }, - { - "name": "Bambu PC FR @BBL P1S 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL P1S 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL P1S 0.6 nozzle", - "sub_path": "filament/Bambu PC FR @BBL P1S 0.6 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL P1S 0.8 nozzle", - "sub_path": "filament/Bambu PC FR @BBL P1S 0.8 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PC FR @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PC FR @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PC FR @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X1C", - "sub_path": "filament/Bambu PC FR @BBL X1C.json" - }, - { - "name": "Bambu PC FR @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X1C 0.6 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X1C 0.6 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X1E", - "sub_path": "filament/Bambu PC FR @BBL X1E.json" - }, - { - "name": "Bambu PC FR @BBL X1E 0.2 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X1E 0.2 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X1E 0.6 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X1E 0.6 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X1E 0.8 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X1E 0.8 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X2D", - "sub_path": "filament/Bambu PC FR @BBL X2D.json" - }, - { - "name": "Bambu PC FR @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PC FR @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu PC FR @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Generic PC", - "sub_path": "filament/Generic PC.json" - }, - { - "name": "Generic PC @0.2 nozzle", - "sub_path": "filament/Generic PC @0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL A1", - "sub_path": "filament/Generic PC @BBL A1.json" - }, - { - "name": "Generic PC @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL H2C", - "sub_path": "filament/Generic PC @BBL H2C.json" - }, - { - "name": "Generic PC @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PC @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PC @BBL H2D", - "sub_path": "filament/Generic PC @BBL H2D.json" - }, - { - "name": "Generic PC @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL H2S", - "sub_path": "filament/Generic PC @BBL H2S.json" - }, - { - "name": "Generic PC @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL P1P", - "sub_path": "filament/P1P/Generic PC @BBL P1P.json" - }, - { - "name": "Generic PC @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL X2D", - "sub_path": "filament/Generic PC @BBL X2D.json" - }, - { - "name": "Generic PC @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PC BLend HT LCF", - "sub_path": "filament/addnorth/addnorth PC BLend HT LCF.json" - }, - { - "name": "Generic PCTG @BBL A1", - "sub_path": "filament/Generic PCTG @BBL A1.json" - }, - { - "name": "Generic PCTG @BBL A1M", - "sub_path": "filament/Generic PCTG @BBL A1M.json" - }, - { - "name": "Generic PCTG @BBL A2L", - "sub_path": "filament/Generic PCTG @BBL A2L.json" - }, - { - "name": "Generic PCTG @BBL H2C", - "sub_path": "filament/Generic PCTG @BBL H2C.json" - }, - { - "name": "Generic PCTG @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PCTG @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PCTG @BBL H2D", - "sub_path": "filament/Generic PCTG @BBL H2D.json" - }, - { - "name": "Generic PCTG @BBL H2DP", - "sub_path": "filament/Generic PCTG @BBL H2DP.json" - }, - { - "name": "Generic PCTG @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PCTG @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PCTG @BBL P2S", - "sub_path": "filament/Generic PCTG @BBL P2S.json" - }, - { - "name": "Generic PCTG @BBL X1C", - "sub_path": "filament/Generic PCTG @BBL X1C.json" - }, - { - "name": "Generic PCTG @BBL X2D", - "sub_path": "filament/Generic PCTG @BBL X2D.json" - }, - { - "name": "Generic PCTG @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PCTG @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PE @BBL A1", - "sub_path": "filament/Generic PE @BBL A1.json" - }, - { - "name": "Generic PE @BBL A1M", - "sub_path": "filament/Generic PE @BBL A1M.json" - }, - { - "name": "Generic PE @BBL A2L", - "sub_path": "filament/Generic PE @BBL A2L.json" - }, - { - "name": "Generic PE @BBL H2C", - "sub_path": "filament/Generic PE @BBL H2C.json" - }, - { - "name": "Generic PE @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PE @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PE @BBL H2D", - "sub_path": "filament/Generic PE @BBL H2D.json" - }, - { - "name": "Generic PE @BBL H2DP", - "sub_path": "filament/Generic PE @BBL H2DP.json" - }, - { - "name": "Generic PE @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PE @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PE @BBL P2S", - "sub_path": "filament/Generic PE @BBL P2S.json" - }, - { - "name": "Generic PE @BBL X1C", - "sub_path": "filament/Generic PE @BBL X1C.json" - }, - { - "name": "Generic PE @BBL X2D", - "sub_path": "filament/Generic PE @BBL X2D.json" - }, - { - "name": "Generic PE @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PE @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PE-CF @BBL A1", - "sub_path": "filament/Generic PE-CF @BBL A1.json" - }, - { - "name": "Generic PE-CF @BBL A1M", - "sub_path": "filament/Generic PE-CF @BBL A1M.json" - }, - { - "name": "Generic PE-CF @BBL A2L", - "sub_path": "filament/Generic PE-CF @BBL A2L.json" - }, - { - "name": "Generic PE-CF @BBL H2C", - "sub_path": "filament/Generic PE-CF @BBL H2C.json" - }, - { - "name": "Generic PE-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PE-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PE-CF @BBL H2D", - "sub_path": "filament/Generic PE-CF @BBL H2D.json" - }, - { - "name": "Generic PE-CF @BBL H2DP", - "sub_path": "filament/Generic PE-CF @BBL H2DP.json" - }, - { - "name": "Generic PE-CF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PE-CF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PE-CF @BBL P2S", - "sub_path": "filament/Generic PE-CF @BBL P2S.json" - }, - { - "name": "Generic PE-CF @BBL X1C", - "sub_path": "filament/Generic PE-CF @BBL X1C.json" - }, - { - "name": "Generic PE-CF @BBL X2D", - "sub_path": "filament/Generic PE-CF @BBL X2D.json" - }, - { - "name": "Generic PE-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PE-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG @BBL A1", - "sub_path": "filament/BETA/BETA PETG @BBL A1.json" - }, - { - "name": "BETA PETG @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG @BBL X1C", - "sub_path": "filament/BETA/BETA PETG @BBL X1C.json" - }, - { - "name": "BETA PETG Fluorescence @BBL A1", - "sub_path": "filament/BETA/BETA PETG Fluorescence @BBL A1.json" - }, - { - "name": "BETA PETG Fluorescence @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Fluorescence @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Fluorescence @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Fluorescence @BBL X1C.json" - }, - { - "name": "BETA PETG Glitter @BBL A1", - "sub_path": "filament/BETA/BETA PETG Glitter @BBL A1.json" - }, - { - "name": "BETA PETG Glitter @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Glitter @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Glitter @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Glitter @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Glitter @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Glitter @BBL X1C.json" - }, - { - "name": "BETA PETG Glow @BBL A1", - "sub_path": "filament/BETA/BETA PETG Glow @BBL A1.json" - }, - { - "name": "BETA PETG Glow @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Glow @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Glow @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Glow @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Glow @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Glow @BBL X1C.json" - }, - { - "name": "BETA PETG Gradient @BBL A1", - "sub_path": "filament/BETA/BETA PETG Gradient @BBL A1.json" - }, - { - "name": "BETA PETG Gradient @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Gradient @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Gradient @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Gradient @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Gradient @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Gradient @BBL X1C.json" - }, - { - "name": "BETA PETG HF @BBL A1", - "sub_path": "filament/BETA/BETA PETG HF @BBL A1.json" - }, - { - "name": "BETA PETG HF @BBL A1M", - "sub_path": "filament/BETA/BETA PETG HF @BBL A1M.json" - }, - { - "name": "BETA PETG HF @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG HF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG HF @BBL X1C", - "sub_path": "filament/BETA/BETA PETG HF @BBL X1C.json" - }, - { - "name": "BETA PETG Heat Color Change @BBL A1", - "sub_path": "filament/BETA/BETA PETG Heat Color Change @BBL A1.json" - }, - { - "name": "BETA PETG Heat Color Change @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Heat Color Change @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Heat Color Change @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Heat Color Change @BBL X1C.json" - }, - { - "name": "BETA PETG Marble @BBL A1", - "sub_path": "filament/BETA/BETA PETG Marble @BBL A1.json" - }, - { - "name": "BETA PETG Marble @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Marble @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Marble @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Marble @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Marble @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Marble @BBL X1C.json" - }, - { - "name": "BETA PETG Matte @BBL A1", - "sub_path": "filament/BETA/BETA PETG Matte @BBL A1.json" - }, - { - "name": "BETA PETG Matte @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Matte @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Matte @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Matte @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Matte @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Matte @BBL X1C.json" - }, - { - "name": "BETA PETG Metallic @BBL A1", - "sub_path": "filament/BETA/BETA PETG Metallic @BBL A1.json" - }, - { - "name": "BETA PETG Metallic @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Metallic @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG Metallic @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Metallic @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Metallic @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Metallic @BBL X1C.json" - }, - { - "name": "BETA PETG Transparent @BBL A1", - "sub_path": "filament/BETA/BETA PETG Transparent @BBL A1.json" - }, - { - "name": "BETA PETG Transparent @BBL A1M", - "sub_path": "filament/BETA/BETA PETG Transparent @BBL A1M.json" - }, - { - "name": "BETA PETG Transparent @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG Transparent @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG Transparent @BBL X1C", - "sub_path": "filament/BETA/BETA PETG Transparent @BBL X1C.json" - }, - { - "name": "BETA PETG UV Color Change @BBL A1", - "sub_path": "filament/BETA/BETA PETG UV Color Change @BBL A1.json" - }, - { - "name": "BETA PETG UV Color Change @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG UV Color Change @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG UV Color Change @BBL X1C", - "sub_path": "filament/BETA/BETA PETG UV Color Change @BBL X1C.json" - }, - { - "name": "BETA PETG-CF @BBL A1 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-CF @BBL A1 0.4 nozzle.json" - }, - { - "name": "BETA PETG-CF @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-CF @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG-CF @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-CF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG-CF @BBL P1P 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-CF @BBL P1P 0.4 nozzle.json" - }, - { - "name": "BETA PETG-CF @BBL X1C 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-CF @BBL X1C 0.4 nozzle.json" - }, - { - "name": "BETA PETG-GF @BBL A1 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-GF @BBL A1 0.4 nozzle.json" - }, - { - "name": "BETA PETG-GF @BBL A1M 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-GF @BBL A1M 0.4 nozzle.json" - }, - { - "name": "BETA PETG-GF @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-GF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PETG-GF @BBL P1P 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-GF @BBL P1P 0.4 nozzle.json" - }, - { - "name": "BETA PETG-GF @BBL X1C 0.4 nozzle", - "sub_path": "filament/BETA/BETA PETG-GF @BBL X1C 0.4 nozzle.json" - }, - { - "name": "Bambu PET-CF @BBL A1", - "sub_path": "filament/Bambu PET-CF @BBL A1.json" - }, - { - "name": "Bambu PET-CF @BBL H2C", - "sub_path": "filament/Bambu PET-CF @BBL H2C.json" - }, - { - "name": "Bambu PET-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PET-CF @BBL H2D", - "sub_path": "filament/Bambu PET-CF @BBL H2D.json" - }, - { - "name": "Bambu PET-CF @BBL H2DP", - "sub_path": "filament/Bambu PET-CF @BBL H2DP.json" - }, - { - "name": "Bambu PET-CF @BBL H2S", - "sub_path": "filament/Bambu PET-CF @BBL H2S.json" - }, - { - "name": "Bambu PET-CF @BBL P1P", - "sub_path": "filament/P1P/Bambu PET-CF @BBL P1P.json" - }, - { - "name": "Bambu PET-CF @BBL P2S", - "sub_path": "filament/Bambu PET-CF @BBL P2S.json" - }, - { - "name": "Bambu PET-CF @BBL X1C", - "sub_path": "filament/Bambu PET-CF @BBL X1C.json" - }, - { - "name": "Bambu PET-CF @BBL X1E", - "sub_path": "filament/Bambu PET-CF @BBL X1E.json" - }, - { - "name": "Bambu PET-CF @BBL X2D", - "sub_path": "filament/Bambu PET-CF @BBL X2D.json" - }, - { - "name": "Bambu PET-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A1", - "sub_path": "filament/Bambu PETG Basic @BBL A1.json" - }, - { - "name": "Bambu PETG Basic @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A1 0.8 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2C", - "sub_path": "filament/Bambu PETG Basic @BBL H2C.json" - }, - { - "name": "Bambu PETG Basic @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2S", - "sub_path": "filament/Bambu PETG Basic @BBL H2S.json" - }, - { - "name": "Bambu PETG Basic @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL X1C", - "sub_path": "filament/Bambu PETG Basic @BBL X1C.json" - }, - { - "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL X2D", - "sub_path": "filament/Bambu PETG Basic @BBL X2D.json" - }, - { - "name": "Bambu PETG Basic @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Basic @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL A1", - "sub_path": "filament/Bambu PETG HF @BBL A1.json" - }, - { - "name": "Bambu PETG HF @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL A1 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL A1 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL A1M", - "sub_path": "filament/Bambu PETG HF @BBL A1M.json" - }, - { - "name": "Bambu PETG HF @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL A1M 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL A2L", - "sub_path": "filament/Bambu PETG HF @BBL A2L.json" - }, - { - "name": "Bambu PETG HF @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2C", - "sub_path": "filament/Bambu PETG HF @BBL H2C.json" - }, - { - "name": "Bambu PETG HF @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2C 0.6 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2C 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2S", - "sub_path": "filament/Bambu PETG HF @BBL H2S.json" - }, - { - "name": "Bambu PETG HF @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL X1C", - "sub_path": "filament/Bambu PETG HF @BBL X1C.json" - }, - { - "name": "Bambu PETG HF @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL X2D", - "sub_path": "filament/Bambu PETG HF @BBL X2D.json" - }, - { - "name": "Bambu PETG HF @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PETG HF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL A1", - "sub_path": "filament/Bambu PETG Translucent @BBL A1.json" - }, - { - "name": "Bambu PETG Translucent @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL A1 0.8 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL A1M", - "sub_path": "filament/Bambu PETG Translucent @BBL A1M.json" - }, - { - "name": "Bambu PETG Translucent @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL A2L", - "sub_path": "filament/Bambu PETG Translucent @BBL A2L.json" - }, - { - "name": "Bambu PETG Translucent @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2C", - "sub_path": "filament/Bambu PETG Translucent @BBL H2C.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2S", - "sub_path": "filament/Bambu PETG Translucent @BBL H2S.json" - }, - { - "name": "Bambu PETG Translucent @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL X1C", - "sub_path": "filament/Bambu PETG Translucent @BBL X1C.json" - }, - { - "name": "Bambu PETG Translucent @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL X2D", - "sub_path": "filament/Bambu PETG Translucent @BBL X2D.json" - }, - { - "name": "Bambu PETG Translucent @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG Translucent @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL A1 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL A1 0.8 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL A1M", - "sub_path": "filament/Bambu PETG-CF @BBL A1M.json" - }, - { - "name": "Bambu PETG-CF @BBL A2L", - "sub_path": "filament/Bambu PETG-CF @BBL A2L.json" - }, - { - "name": "Bambu PETG-CF @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL H2C", - "sub_path": "filament/Bambu PETG-CF @BBL H2C.json" - }, - { - "name": "Bambu PETG-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL H2S", - "sub_path": "filament/Bambu PETG-CF @BBL H2S.json" - }, - { - "name": "Bambu PETG-CF @BBL P1P", - "sub_path": "filament/P1P/Bambu PETG-CF @BBL P1P.json" - }, - { - "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle", - "sub_path": "filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL X1C", - "sub_path": "filament/Bambu PETG-CF @BBL X1C.json" - }, - { - "name": "Bambu PETG-CF @BBL X1C 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL X2D", - "sub_path": "filament/Bambu PETG-CF @BBL X2D.json" - }, - { - "name": "Bambu PETG-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Fiberon PET-CF @BBL H2D", - "sub_path": "filament/Polymaker/Fiberon PET-CF @BBL H2D.json" - }, - { - "name": "Fiberon PET-CF @BBL X1C", - "sub_path": "filament/Polymaker/Fiberon PET-CF @BBL X1C.json" - }, - { - "name": "Fiberon PET-CF17 @BBL X1", - "sub_path": "filament/Polymaker/Fiberon PET-CF17 @BBL X1.json" - }, - { - "name": "Fiberon PETG-ESD @BBL H2D", - "sub_path": "filament/Polymaker/Fiberon PETG-ESD @BBL H2D.json" - }, - { - "name": "Fiberon PETG-ESD @BBL X1", - "sub_path": "filament/Polymaker/Fiberon PETG-ESD @BBL X1.json" - }, - { - "name": "Fiberon PETG-ESD @BBL X1C", - "sub_path": "filament/Polymaker/Fiberon PETG-ESD @BBL X1C.json" - }, - { - "name": "Fiberon PETG-rCF @BBL H2D", - "sub_path": "filament/Polymaker/Fiberon PETG-rCF @BBL H2D.json" - }, - { - "name": "Fiberon PETG-rCF @BBL X1C", - "sub_path": "filament/Polymaker/Fiberon PETG-rCF @BBL X1C.json" - }, - { - "name": "Fiberon PETG-rCF08 @BBL X1", - "sub_path": "filament/Polymaker/Fiberon PETG-rCF08 @BBL X1.json" - }, - { - "name": "Generic PETG", - "sub_path": "filament/Generic PETG.json" - }, - { - "name": "Generic PETG @0.2 nozzle", - "sub_path": "filament/Generic PETG @0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL A1", - "sub_path": "filament/Generic PETG @BBL A1.json" - }, - { - "name": "Generic PETG @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL A1M", - "sub_path": "filament/Generic PETG @BBL A1M.json" - }, - { - "name": "Generic PETG @BBL A1M 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL A2L", - "sub_path": "filament/Generic PETG @BBL A2L.json" - }, - { - "name": "Generic PETG @BBL A2L 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL H2C", - "sub_path": "filament/Generic PETG @BBL H2C.json" - }, - { - "name": "Generic PETG @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PETG @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PETG @BBL H2D", - "sub_path": "filament/Generic PETG @BBL H2D.json" - }, - { - "name": "Generic PETG @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL H2DP", - "sub_path": "filament/Generic PETG @BBL H2DP.json" - }, - { - "name": "Generic PETG @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL H2S", - "sub_path": "filament/Generic PETG @BBL H2S.json" - }, - { - "name": "Generic PETG @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL P1P", - "sub_path": "filament/P1P/Generic PETG @BBL P1P.json" - }, - { - "name": "Generic PETG @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL P2S", - "sub_path": "filament/Generic PETG @BBL P2S.json" - }, - { - "name": "Generic PETG @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL X2D", - "sub_path": "filament/Generic PETG @BBL X2D.json" - }, - { - "name": "Generic PETG @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic PETG @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic PETG @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PETG Base", - "sub_path": "filament/addnorth/addnorth PETG Base.json" - }, - { - "name": "addnorth PETG ESD", - "sub_path": "filament/addnorth/addnorth PETG ESD.json" - }, - { - "name": "addnorth PETG Economy", - "sub_path": "filament/addnorth/addnorth PETG Economy.json" - }, - { - "name": "addnorth PETG Flame v0", - "sub_path": "filament/addnorth/addnorth PETG Flame v0.json" - }, - { - "name": "addnorth PETG PRO Matte", - "sub_path": "filament/addnorth/addnorth PETG PRO Matte.json" - }, - { - "name": "addnorth PETG rPETG Matte", - "sub_path": "filament/addnorth/addnorth PETG rPETG Matte.json" - }, - { - "name": "Generic PETG HF @BBL A1", - "sub_path": "filament/Generic PETG HF @BBL A1.json" - }, - { - "name": "Generic PETG HF @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL A1M", - "sub_path": "filament/Generic PETG HF @BBL A1M.json" - }, - { - "name": "Generic PETG HF @BBL A1M 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL A2L", - "sub_path": "filament/Generic PETG HF @BBL A2L.json" - }, - { - "name": "Generic PETG HF @BBL A2L 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL H2C", - "sub_path": "filament/Generic PETG HF @BBL H2C.json" - }, - { - "name": "Generic PETG HF @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PETG HF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL H2D", - "sub_path": "filament/Generic PETG HF @BBL H2D.json" - }, - { - "name": "Generic PETG HF @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL H2DP", - "sub_path": "filament/Generic PETG HF @BBL H2DP.json" - }, - { - "name": "Generic PETG HF @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PETG HF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL P1P", - "sub_path": "filament/Generic PETG HF @BBL P1P.json" - }, - { - "name": "Generic PETG HF @BBL P1P 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL P2S", - "sub_path": "filament/Generic PETG HF @BBL P2S.json" - }, - { - "name": "Generic PETG HF @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL P2S 0.4 nozzle", - "sub_path": "filament/Generic PETG HF @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL X1C", - "sub_path": "filament/Generic PETG HF @BBL X1C.json" - }, - { - "name": "Generic PETG HF @BBL X1C 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL X2D", - "sub_path": "filament/Generic PETG HF @BBL X2D.json" - }, - { - "name": "Generic PETG HF @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic PETG HF @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic PETG HF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PETG HF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PETG-CF @BBL A1", - "sub_path": "filament/Generic PETG-CF @BBL A1.json" - }, - { - "name": "Generic PETG-CF @BBL A1M", - "sub_path": "filament/P1P/Generic PETG-CF @BBL A1M.json" - }, - { - "name": "Generic PETG-CF @BBL A2L", - "sub_path": "filament/Generic PETG-CF @BBL A2L.json" - }, - { - "name": "Generic PETG-CF @BBL H2C", - "sub_path": "filament/Generic PETG-CF @BBL H2C.json" - }, - { - "name": "Generic PETG-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PETG-CF @BBL H2D", - "sub_path": "filament/Generic PETG-CF @BBL H2D.json" - }, - { - "name": "Generic PETG-CF @BBL H2DP", - "sub_path": "filament/Generic PETG-CF @BBL H2DP.json" - }, - { - "name": "Generic PETG-CF @BBL H2S", - "sub_path": "filament/Generic PETG-CF @BBL H2S.json" - }, - { - "name": "Generic PETG-CF @BBL P1P", - "sub_path": "filament/P1P/Generic PETG-CF @BBL P1P.json" - }, - { - "name": "Generic PETG-CF @BBL P2S", - "sub_path": "filament/Generic PETG-CF @BBL P2S.json" - }, - { - "name": "Generic PETG-CF @BBL X1C", - "sub_path": "filament/Generic PETG-CF @BBL X1C.json" - }, - { - "name": "Generic PETG-CF @BBL X2D", - "sub_path": "filament/Generic PETG-CF @BBL X2D.json" - }, - { - "name": "Generic PETG-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PETG-CF Rigid X", - "sub_path": "filament/addnorth/addnorth PETG-CF Rigid X.json" - }, - { - "name": "PolyLite PETG @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL A1.json" - }, - { - "name": "PolyLite PETG @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL A1 0.2 nozzle.json" - }, - { - "name": "PolyLite PETG @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL A1M.json" - }, - { - "name": "PolyLite PETG @BBL H2D", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL H2D.json" - }, - { - "name": "PolyLite PETG @BBL H2D 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json" - }, - { - "name": "PolyLite PETG @BBL H2DP", - "sub_path": "filament/PolyLite PETG @BBL H2DP.json" - }, - { - "name": "PolyLite PETG @BBL H2DP 0.2 nozzle", - "sub_path": "filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "PolyLite PETG @BBL H2S", - "sub_path": "filament/PolyLite PETG @BBL H2S.json" - }, - { - "name": "PolyLite PETG @BBL H2S 0.2 nozzle", - "sub_path": "filament/PolyLite PETG @BBL H2S 0.2 nozzle.json" - }, - { - "name": "PolyLite PETG @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL P1P.json" - }, - { - "name": "PolyLite PETG @BBL X1C", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL X1C.json" - }, - { - "name": "SUNLU PETG @BBL A1", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1.json" - }, - { - "name": "SUNLU PETG @BBL A1 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json" - }, - { - "name": "SUNLU PETG @BBL A1 0.8 nozzle", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json" - }, - { - "name": "SUNLU PETG @BBL A1M 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json" - }, - { - "name": "SUNLU PETG @BBL A1M 0.4 nozzle", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M.json" - }, - { - "name": "SUNLU PETG @BBL A1M 0.8 nozzle", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json" - }, - { - "name": "SUNLU PETG @BBL X1C", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL X1C.json" - }, - { - "name": "SUNLU PETG @BBL X1C 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json" - }, - { - "name": "SUNLU PETG @BBL X1C 0.8 nozzle", - "sub_path": "filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Generic PHA @BBL A1", - "sub_path": "filament/Generic PHA @BBL A1.json" - }, - { - "name": "Generic PHA @BBL A1M", - "sub_path": "filament/Generic PHA @BBL A1M.json" - }, - { - "name": "Generic PHA @BBL A2L", - "sub_path": "filament/Generic PHA @BBL A2L.json" - }, - { - "name": "Generic PHA @BBL H2C", - "sub_path": "filament/Generic PHA @BBL H2C.json" - }, - { - "name": "Generic PHA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PHA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PHA @BBL H2D", - "sub_path": "filament/Generic PHA @BBL H2D.json" - }, - { - "name": "Generic PHA @BBL H2DP", - "sub_path": "filament/Generic PHA @BBL H2DP.json" - }, - { - "name": "Generic PHA @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PHA @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PHA @BBL P2S", - "sub_path": "filament/Generic PHA @BBL P2S.json" - }, - { - "name": "Generic PHA @BBL X1C", - "sub_path": "filament/Generic PHA @BBL X1C.json" - }, - { - "name": "Generic PHA @BBL X2D", - "sub_path": "filament/Generic PHA @BBL X2D.json" - }, - { - "name": "Generic PHA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PHA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "BETA PLA Basic @BBL A1", - "sub_path": "filament/BETA/BETA PLA Basic @BBL A1.json" - }, - { - "name": "BETA PLA Basic @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Basic @BBL A1M.json" - }, - { - "name": "BETA PLA Basic @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Basic @BBL H2D.json" - }, - { - "name": "BETA PLA Basic @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Basic @BBL P1P.json" - }, - { - "name": "BETA PLA Basic @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Basic @BBL X1C.json" - }, - { - "name": "BETA PLA Chameleon @BBL A1", - "sub_path": "filament/BETA/BETA PLA Chameleon @BBL A1.json" - }, - { - "name": "BETA PLA Chameleon @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Chameleon @BBL A1M.json" - }, - { - "name": "BETA PLA Chameleon @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Chameleon @BBL H2D.json" - }, - { - "name": "BETA PLA Chameleon @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Chameleon @BBL P1P.json" - }, - { - "name": "BETA PLA Chameleon @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Chameleon @BBL X1C.json" - }, - { - "name": "BETA PLA Fluorescence @BBL A1", - "sub_path": "filament/BETA/BETA PLA Fluorescence @BBL A1.json" - }, - { - "name": "BETA PLA Fluorescence @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Fluorescence @BBL A1M.json" - }, - { - "name": "BETA PLA Fluorescence @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Fluorescence @BBL H2D.json" - }, - { - "name": "BETA PLA Fluorescence @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Fluorescence @BBL P1P.json" - }, - { - "name": "BETA PLA Fluorescence @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Fluorescence @BBL X1C.json" - }, - { - "name": "BETA PLA Glitter @BBL A1", - "sub_path": "filament/BETA/BETA PLA Glitter @BBL A1.json" - }, - { - "name": "BETA PLA Glitter @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Glitter @BBL A1M.json" - }, - { - "name": "BETA PLA Glitter @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Glitter @BBL H2D.json" - }, - { - "name": "BETA PLA Glitter @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Glitter @BBL P1P.json" - }, - { - "name": "BETA PLA Glitter @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Glitter @BBL X1C.json" - }, - { - "name": "BETA PLA Glow @BBL A1", - "sub_path": "filament/BETA/BETA PLA Glow @BBL A1.json" - }, - { - "name": "BETA PLA Glow @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Glow @BBL A1M.json" - }, - { - "name": "BETA PLA Glow @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Glow @BBL H2D.json" - }, - { - "name": "BETA PLA Glow @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Glow @BBL P1P.json" - }, - { - "name": "BETA PLA Glow @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Glow @BBL X1C.json" - }, - { - "name": "BETA PLA Gradient @BBL A1", - "sub_path": "filament/BETA/BETA PLA Gradient @BBL A1.json" - }, - { - "name": "BETA PLA Gradient @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Gradient @BBL A1M.json" - }, - { - "name": "BETA PLA Gradient @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Gradient @BBL H2D.json" - }, - { - "name": "BETA PLA Gradient @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Gradient @BBL P1P.json" - }, - { - "name": "BETA PLA Gradient @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Gradient @BBL X1C.json" - }, - { - "name": "BETA PLA Heat Color Change @BBL A1", - "sub_path": "filament/BETA/BETA PLA Heat Color Change @BBL A1.json" - }, - { - "name": "BETA PLA Heat Color Change @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Heat Color Change @BBL A1M.json" - }, - { - "name": "BETA PLA Heat Color Change @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Heat Color Change @BBL H2D.json" - }, - { - "name": "BETA PLA Heat Color Change @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Heat Color Change @BBL P1P.json" - }, - { - "name": "BETA PLA Heat Color Change @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Heat Color Change @BBL X1C.json" - }, - { - "name": "BETA PLA High Speed @BBL A1", - "sub_path": "filament/BETA/BETA PLA High Speed @BBL A1.json" - }, - { - "name": "BETA PLA High Speed @BBL A1M", - "sub_path": "filament/BETA/BETA PLA High Speed @BBL A1M.json" - }, - { - "name": "BETA PLA High Speed @BBL H2D", - "sub_path": "filament/BETA/BETA PLA High Speed @BBL H2D.json" - }, - { - "name": "BETA PLA High Speed @BBL P1P", - "sub_path": "filament/BETA/BETA PLA High Speed @BBL P1P.json" - }, - { - "name": "BETA PLA High Speed @BBL X1C", - "sub_path": "filament/BETA/BETA PLA High Speed @BBL X1C.json" - }, - { - "name": "BETA PLA High Temp @BBL A1", - "sub_path": "filament/BETA/BETA PLA High Temp @BBL A1.json" - }, - { - "name": "BETA PLA High Temp @BBL A1M", - "sub_path": "filament/BETA/BETA PLA High Temp @BBL A1M.json" - }, - { - "name": "BETA PLA High Temp @BBL H2D", - "sub_path": "filament/BETA/BETA PLA High Temp @BBL H2D.json" - }, - { - "name": "BETA PLA High Temp @BBL P1P", - "sub_path": "filament/BETA/BETA PLA High Temp @BBL P1P.json" - }, - { - "name": "BETA PLA High Temp @BBL X1C", - "sub_path": "filament/BETA/BETA PLA High Temp @BBL X1C.json" - }, - { - "name": "BETA PLA Marble @BBL A1", - "sub_path": "filament/BETA/BETA PLA Marble @BBL A1.json" - }, - { - "name": "BETA PLA Marble @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Marble @BBL A1M.json" - }, - { - "name": "BETA PLA Marble @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Marble @BBL H2D.json" - }, - { - "name": "BETA PLA Marble @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Marble @BBL P1P.json" - }, - { - "name": "BETA PLA Marble @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Marble @BBL X1C.json" - }, - { - "name": "BETA PLA Matte @BBL A1", - "sub_path": "filament/BETA/BETA PLA Matte @BBL A1.json" - }, - { - "name": "BETA PLA Matte @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Matte @BBL A1M.json" - }, - { - "name": "BETA PLA Matte @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Matte @BBL H2D.json" - }, - { - "name": "BETA PLA Matte @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Matte @BBL P1P.json" - }, - { - "name": "BETA PLA Matte @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Matte @BBL X1C.json" - }, - { - "name": "BETA PLA Metal @BBL A1", - "sub_path": "filament/BETA/BETA PLA Metal @BBL A1.json" - }, - { - "name": "BETA PLA Metal @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Metal @BBL A1M.json" - }, - { - "name": "BETA PLA Metal @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Metal @BBL H2D.json" - }, - { - "name": "BETA PLA Metal @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Metal @BBL P1P.json" - }, - { - "name": "BETA PLA Metal @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Metal @BBL X1C.json" - }, - { - "name": "BETA PLA Metallic @BBL A1", - "sub_path": "filament/BETA/BETA PLA Metallic @BBL A1.json" - }, - { - "name": "BETA PLA Metallic @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Metallic @BBL A1M.json" - }, - { - "name": "BETA PLA Metallic @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Metallic @BBL H2D.json" - }, - { - "name": "BETA PLA Metallic @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Metallic @BBL P1P.json" - }, - { - "name": "BETA PLA Metallic @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Metallic @BBL X1C.json" - }, - { - "name": "BETA PLA PRO @BBL A1", - "sub_path": "filament/BETA/BETA PLA PRO @BBL A1.json" - }, - { - "name": "BETA PLA PRO @BBL A1M", - "sub_path": "filament/BETA/BETA PLA PRO @BBL A1M.json" - }, - { - "name": "BETA PLA PRO @BBL H2D", - "sub_path": "filament/BETA/BETA PLA PRO @BBL H2D.json" - }, - { - "name": "BETA PLA PRO @BBL P1P", - "sub_path": "filament/BETA/BETA PLA PRO @BBL P1P.json" - }, - { - "name": "BETA PLA PRO @BBL X1C", - "sub_path": "filament/BETA/BETA PLA PRO @BBL X1C.json" - }, - { - "name": "BETA PLA Silk @BBL A1", - "sub_path": "filament/BETA/BETA PLA Silk @BBL A1.json" - }, - { - "name": "BETA PLA Silk @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Silk @BBL A1M.json" - }, - { - "name": "BETA PLA Silk @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Silk @BBL H2D.json" - }, - { - "name": "BETA PLA Silk @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Silk @BBL P1P.json" - }, - { - "name": "BETA PLA Silk @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Silk @BBL X1C.json" - }, - { - "name": "BETA PLA Silk+ @BBL A1", - "sub_path": "filament/BETA/BETA PLA Silk+ @BBL A1.json" - }, - { - "name": "BETA PLA Silk+ @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Silk+ @BBL A1M.json" - }, - { - "name": "BETA PLA Silk+ @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Silk+ @BBL H2D.json" - }, - { - "name": "BETA PLA Silk+ @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Silk+ @BBL P1P.json" - }, - { - "name": "BETA PLA Silk+ @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Silk+ @BBL X1C.json" - }, - { - "name": "BETA PLA Transparent @BBL A1", - "sub_path": "filament/BETA/BETA PLA Transparent @BBL A1.json" - }, - { - "name": "BETA PLA Transparent @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Transparent @BBL A1M.json" - }, - { - "name": "BETA PLA Transparent @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Transparent @BBL H2D.json" - }, - { - "name": "BETA PLA Transparent @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Transparent @BBL P1P.json" - }, - { - "name": "BETA PLA Transparent @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Transparent @BBL X1C.json" - }, - { - "name": "BETA PLA UV Color Change @BBL A1", - "sub_path": "filament/BETA/BETA PLA UV Color Change @BBL A1.json" - }, - { - "name": "BETA PLA UV Color Change @BBL A1M", - "sub_path": "filament/BETA/BETA PLA UV Color Change @BBL A1M.json" - }, - { - "name": "BETA PLA UV Color Change @BBL H2D", - "sub_path": "filament/BETA/BETA PLA UV Color Change @BBL H2D.json" - }, - { - "name": "BETA PLA UV Color Change @BBL P1P", - "sub_path": "filament/BETA/BETA PLA UV Color Change @BBL P1P.json" - }, - { - "name": "BETA PLA UV Color Change @BBL X1C", - "sub_path": "filament/BETA/BETA PLA UV Color Change @BBL X1C.json" - }, - { - "name": "BETA PLA Wood @BBL A1", - "sub_path": "filament/BETA/BETA PLA Wood @BBL A1.json" - }, - { - "name": "BETA PLA Wood @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Wood @BBL A1M.json" - }, - { - "name": "BETA PLA Wood @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Wood @BBL H2D.json" - }, - { - "name": "BETA PLA Wood @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Wood @BBL P1P.json" - }, - { - "name": "BETA PLA Wood @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Wood @BBL X1C.json" - }, - { - "name": "BETA PLA Youth @BBL A1", - "sub_path": "filament/BETA/BETA PLA Youth @BBL A1.json" - }, - { - "name": "BETA PLA Youth @BBL A1M", - "sub_path": "filament/BETA/BETA PLA Youth @BBL A1M.json" - }, - { - "name": "BETA PLA Youth @BBL H2D", - "sub_path": "filament/BETA/BETA PLA Youth @BBL H2D.json" - }, - { - "name": "BETA PLA Youth @BBL P1P", - "sub_path": "filament/BETA/BETA PLA Youth @BBL P1P.json" - }, - { - "name": "BETA PLA Youth @BBL X1C", - "sub_path": "filament/BETA/BETA PLA Youth @BBL X1C.json" - }, - { - "name": "BETA PLA-CF @BBL A1", - "sub_path": "filament/BETA/BETA PLA-CF @BBL A1.json" - }, - { - "name": "BETA PLA-CF @BBL A1M", - "sub_path": "filament/BETA/BETA PLA-CF @BBL A1M.json" - }, - { - "name": "BETA PLA-CF @BBL H2D 0.4 nozzle", - "sub_path": "filament/BETA/BETA PLA-CF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "BETA PLA-CF @BBL P1P", - "sub_path": "filament/BETA/BETA PLA-CF @BBL P1P.json" - }, - { - "name": "BETA PLA-CF @BBL X1C", - "sub_path": "filament/BETA/BETA PLA-CF @BBL X1C.json" - }, - { - "name": "Bambu PLA Aero @BBL A1", - "sub_path": "filament/Bambu PLA Aero @BBL A1.json" - }, - { - "name": "Bambu PLA Aero @BBL A1M", - "sub_path": "filament/Bambu PLA Aero @BBL A1M.json" - }, - { - "name": "Bambu PLA Aero @BBL A2L", - "sub_path": "filament/Bambu PLA Aero @BBL A2L.json" - }, - { - "name": "Bambu PLA Aero @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Aero @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Aero @BBL H2C", - "sub_path": "filament/Bambu PLA Aero @BBL H2C.json" - }, - { - "name": "Bambu PLA Aero @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Aero @BBL H2D", - "sub_path": "filament/Bambu PLA Aero @BBL H2D.json" - }, - { - "name": "Bambu PLA Aero @BBL H2DP", - "sub_path": "filament/Bambu PLA Aero @BBL H2DP.json" - }, - { - "name": "Bambu PLA Aero @BBL H2S", - "sub_path": "filament/Bambu PLA Aero @BBL H2S.json" - }, - { - "name": "Bambu PLA Aero @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Aero @BBL P1P.json" - }, - { - "name": "Bambu PLA Aero @BBL P2S", - "sub_path": "filament/Bambu PLA Aero @BBL P2S.json" - }, - { - "name": "Bambu PLA Aero @BBL X1", - "sub_path": "filament/Bambu PLA Aero @BBL X1.json" - }, - { - "name": "Bambu PLA Aero @BBL X1C", - "sub_path": "filament/Bambu PLA Aero @BBL X1C.json" - }, - { - "name": "Bambu PLA Aero @BBL X2D", - "sub_path": "filament/Bambu PLA Aero @BBL X2D.json" - }, - { - "name": "Bambu PLA Aero @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL A1", - "sub_path": "filament/Bambu PLA Basic @BBL A1.json" - }, - { - "name": "Bambu PLA Basic @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL A1M", - "sub_path": "filament/Bambu PLA Basic @BBL A1M.json" - }, - { - "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2C", - "sub_path": "filament/Bambu PLA Basic @BBL H2C.json" - }, - { - "name": "Bambu PLA Basic @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2C 0.6 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2D", - "sub_path": "filament/Bambu PLA Basic @BBL H2D.json" - }, - { - "name": "Bambu PLA Basic @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2DP", - "sub_path": "filament/Bambu PLA Basic @BBL H2DP.json" - }, - { - "name": "Bambu PLA Basic @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2S", - "sub_path": "filament/Bambu PLA Basic @BBL H2S.json" - }, - { - "name": "Bambu PLA Basic @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P.json" - }, - { - "name": "Bambu PLA Basic @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL P2S", - "sub_path": "filament/Bambu PLA Basic @BBL P2S.json" - }, - { - "name": "Bambu PLA Basic @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL X1", - "sub_path": "filament/Bambu PLA Basic @BBL X1.json" - }, - { - "name": "Bambu PLA Basic @BBL X1C", - "sub_path": "filament/Bambu PLA Basic @BBL X1C.json" - }, - { - "name": "Bambu PLA Basic @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL X2D", - "sub_path": "filament/Bambu PLA Basic @BBL X2D.json" - }, - { - "name": "Bambu PLA Basic @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Basic @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A1", - "sub_path": "filament/Bambu PLA Dynamic @BBL A1.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A1M", - "sub_path": "filament/Bambu PLA Dynamic @BBL A1M.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A2L", - "sub_path": "filament/Bambu PLA Dynamic @BBL A2L.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2C", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2C.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2D", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2D.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2DP", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2DP.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2S", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2S.json" - }, - { - "name": "Bambu PLA Dynamic @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL P1P", - "sub_path": "filament/Bambu PLA Dynamic @BBL P1P.json" - }, - { - "name": "Bambu PLA Dynamic @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL P2S", - "sub_path": "filament/Bambu PLA Dynamic @BBL P2S.json" - }, - { - "name": "Bambu PLA Dynamic @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL X1C", - "sub_path": "filament/Bambu PLA Dynamic @BBL X1C.json" - }, - { - "name": "Bambu PLA Dynamic @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL X2D", - "sub_path": "filament/Bambu PLA Dynamic @BBL X2D.json" - }, - { - "name": "Bambu PLA Dynamic @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Dynamic @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A1", - "sub_path": "filament/Bambu PLA Galaxy @BBL A1.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A1M", - "sub_path": "filament/Bambu PLA Galaxy @BBL A1M.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A2L", - "sub_path": "filament/Bambu PLA Galaxy @BBL A2L.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2C", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2C.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2D", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2D.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2DP", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2DP.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2S", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2S.json" - }, - { - "name": "Bambu PLA Galaxy @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL P1P", - "sub_path": "filament/Bambu PLA Galaxy @BBL P1P.json" - }, - { - "name": "Bambu PLA Galaxy @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL P2S", - "sub_path": "filament/Bambu PLA Galaxy @BBL P2S.json" - }, - { - "name": "Bambu PLA Galaxy @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL X1C", - "sub_path": "filament/Bambu PLA Galaxy @BBL X1C.json" - }, - { - "name": "Bambu PLA Galaxy @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL X2D", - "sub_path": "filament/Bambu PLA Galaxy @BBL X2D.json" - }, - { - "name": "Bambu PLA Galaxy @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Galaxy @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL A1", - "sub_path": "filament/Bambu PLA Glow @BBL A1.json" - }, - { - "name": "Bambu PLA Glow @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL A1M", - "sub_path": "filament/Bambu PLA Glow @BBL A1M.json" - }, - { - "name": "Bambu PLA Glow @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL H2C", - "sub_path": "filament/Bambu PLA Glow @BBL H2C.json" - }, - { - "name": "Bambu PLA Glow @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL H2D", - "sub_path": "filament/Bambu PLA Glow @BBL H2D.json" - }, - { - "name": "Bambu PLA Glow @BBL H2DP", - "sub_path": "filament/Bambu PLA Glow @BBL H2DP.json" - }, - { - "name": "Bambu PLA Glow @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL H2S", - "sub_path": "filament/Bambu PLA Glow @BBL H2S.json" - }, - { - "name": "Bambu PLA Glow @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL P1P", - "sub_path": "filament/Bambu PLA Glow @BBL P1P.json" - }, - { - "name": "Bambu PLA Glow @BBL P2S", - "sub_path": "filament/Bambu PLA Glow @BBL P2S.json" - }, - { - "name": "Bambu PLA Glow @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL X1", - "sub_path": "filament/Bambu PLA Glow @BBL X1.json" - }, - { - "name": "Bambu PLA Glow @BBL X1C", - "sub_path": "filament/Bambu PLA Glow @BBL X1C.json" - }, - { - "name": "Bambu PLA Glow @BBL X1E", - "sub_path": "filament/Bambu PLA Glow @BBL X1E.json" - }, - { - "name": "Bambu PLA Glow @BBL X2D", - "sub_path": "filament/Bambu PLA Glow @BBL X2D.json" - }, - { - "name": "Bambu PLA Glow @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL A1", - "sub_path": "filament/Bambu PLA Lite @BBL A1.json" - }, - { - "name": "Bambu PLA Lite @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL A1M", - "sub_path": "filament/Bambu PLA Lite @BBL A1M.json" - }, - { - "name": "Bambu PLA Lite @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2C", - "sub_path": "filament/Bambu PLA Lite @BBL H2C.json" - }, - { - "name": "Bambu PLA Lite @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2D", - "sub_path": "filament/Bambu PLA Lite @BBL H2D.json" - }, - { - "name": "Bambu PLA Lite @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL H2S", - "sub_path": "filament/Bambu PLA Lite @BBL H2S.json" - }, - { - "name": "Bambu PLA Lite @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL P1P", - "sub_path": "filament/Bambu PLA Lite @BBL P1P.json" - }, - { - "name": "Bambu PLA Lite @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL X1C", - "sub_path": "filament/Bambu PLA Lite @BBL X1C.json" - }, - { - "name": "Bambu PLA Lite @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL X2D", - "sub_path": "filament/Bambu PLA Lite @BBL X2D.json" - }, - { - "name": "Bambu PLA Lite @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Lite @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Marble @BBL A1", - "sub_path": "filament/Bambu PLA Marble @BBL A1.json" - }, - { - "name": "Bambu PLA Marble @BBL A1M", - "sub_path": "filament/Bambu PLA Marble @BBL A1M.json" - }, - { - "name": "Bambu PLA Marble @BBL A2L", - "sub_path": "filament/Bambu PLA Marble @BBL A2L.json" - }, - { - "name": "Bambu PLA Marble @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Marble @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Marble @BBL H2C", - "sub_path": "filament/Bambu PLA Marble @BBL H2C.json" - }, - { - "name": "Bambu PLA Marble @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Marble @BBL H2D", - "sub_path": "filament/Bambu PLA Marble @BBL H2D.json" - }, - { - "name": "Bambu PLA Marble @BBL H2DP", - "sub_path": "filament/Bambu PLA Marble @BBL H2DP.json" - }, - { - "name": "Bambu PLA Marble @BBL H2S", - "sub_path": "filament/Bambu PLA Marble @BBL H2S.json" - }, - { - "name": "Bambu PLA Marble @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Marble @BBL P1P.json" - }, - { - "name": "Bambu PLA Marble @BBL P2S", - "sub_path": "filament/Bambu PLA Marble @BBL P2S.json" - }, - { - "name": "Bambu PLA Marble @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Marble @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Marble @BBL X1", - "sub_path": "filament/Bambu PLA Marble @BBL X1.json" - }, - { - "name": "Bambu PLA Marble @BBL X1C", - "sub_path": "filament/Bambu PLA Marble @BBL X1C.json" - }, - { - "name": "Bambu PLA Marble @BBL X2D", - "sub_path": "filament/Bambu PLA Marble @BBL X2D.json" - }, - { - "name": "Bambu PLA Marble @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL A1", - "sub_path": "filament/Bambu PLA Matte @BBL A1.json" - }, - { - "name": "Bambu PLA Matte @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL A1M", - "sub_path": "filament/Bambu PLA Matte @BBL A1M.json" - }, - { - "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2C", - "sub_path": "filament/Bambu PLA Matte @BBL H2C.json" - }, - { - "name": "Bambu PLA Matte @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2C 0.6 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2D", - "sub_path": "filament/Bambu PLA Matte @BBL H2D.json" - }, - { - "name": "Bambu PLA Matte @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2DP", - "sub_path": "filament/Bambu PLA Matte @BBL H2DP.json" - }, - { - "name": "Bambu PLA Matte @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2S", - "sub_path": "filament/Bambu PLA Matte @BBL H2S.json" - }, - { - "name": "Bambu PLA Matte @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P.json" - }, - { - "name": "Bambu PLA Matte @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL P2S", - "sub_path": "filament/Bambu PLA Matte @BBL P2S.json" - }, - { - "name": "Bambu PLA Matte @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL X1", - "sub_path": "filament/Bambu PLA Matte @BBL X1.json" - }, - { - "name": "Bambu PLA Matte @BBL X1C", - "sub_path": "filament/Bambu PLA Matte @BBL X1C.json" - }, - { - "name": "Bambu PLA Matte @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL X2D", - "sub_path": "filament/Bambu PLA Matte @BBL X2D.json" - }, - { - "name": "Bambu PLA Matte @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Matte @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL A1", - "sub_path": "filament/Bambu PLA Metal @BBL A1.json" - }, - { - "name": "Bambu PLA Metal @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL A1M", - "sub_path": "filament/Bambu PLA Metal @BBL A1M.json" - }, - { - "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL A2L", - "sub_path": "filament/Bambu PLA Metal @BBL A2L.json" - }, - { - "name": "Bambu PLA Metal @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL H2C", - "sub_path": "filament/Bambu PLA Metal @BBL H2C.json" - }, - { - "name": "Bambu PLA Metal @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL H2D", - "sub_path": "filament/Bambu PLA Metal @BBL H2D.json" - }, - { - "name": "Bambu PLA Metal @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL H2DP", - "sub_path": "filament/Bambu PLA Metal @BBL H2DP.json" - }, - { - "name": "Bambu PLA Metal @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL H2S", - "sub_path": "filament/Bambu PLA Metal @BBL H2S.json" - }, - { - "name": "Bambu PLA Metal @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P.json" - }, - { - "name": "Bambu PLA Metal @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL P2S", - "sub_path": "filament/Bambu PLA Metal @BBL P2S.json" - }, - { - "name": "Bambu PLA Metal @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL X1", - "sub_path": "filament/Bambu PLA Metal @BBL X1.json" - }, - { - "name": "Bambu PLA Metal @BBL X1C", - "sub_path": "filament/Bambu PLA Metal @BBL X1C.json" - }, - { - "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL X2D", - "sub_path": "filament/Bambu PLA Metal @BBL X2D.json" - }, - { - "name": "Bambu PLA Metal @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Metal @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL A2L", - "sub_path": "filament/Bambu PLA Pure @BBL A2L.json" - }, - { - "name": "Bambu PLA Pure @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL H2C", - "sub_path": "filament/Bambu PLA Pure @BBL H2C.json" - }, - { - "name": "Bambu PLA Pure @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL H2D", - "sub_path": "filament/Bambu PLA Pure @BBL H2D.json" - }, - { - "name": "Bambu PLA Pure @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL H2DP", - "sub_path": "filament/Bambu PLA Pure @BBL H2DP.json" - }, - { - "name": "Bambu PLA Pure @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Pure @BBL H2S", - "sub_path": "filament/Bambu PLA Pure @BBL H2S.json" - }, - { - "name": "Bambu PLA Pure @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL A1", - "sub_path": "filament/Bambu PLA Silk @BBL A1.json" - }, - { - "name": "Bambu PLA Silk @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL A1M", - "sub_path": "filament/Bambu PLA Silk @BBL A1M.json" - }, - { - "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL H2C", - "sub_path": "filament/Bambu PLA Silk @BBL H2C.json" - }, - { - "name": "Bambu PLA Silk @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL H2D", - "sub_path": "filament/Bambu PLA Silk @BBL H2D.json" - }, - { - "name": "Bambu PLA Silk @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL H2DP", - "sub_path": "filament/Bambu PLA Silk @BBL H2DP.json" - }, - { - "name": "Bambu PLA Silk @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL H2S", - "sub_path": "filament/Bambu PLA Silk @BBL H2S.json" - }, - { - "name": "Bambu PLA Silk @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Silk @BBL P1P.json" - }, - { - "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL P2S", - "sub_path": "filament/Bambu PLA Silk @BBL P2S.json" - }, - { - "name": "Bambu PLA Silk @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL X1", - "sub_path": "filament/Bambu PLA Silk @BBL X1.json" - }, - { - "name": "Bambu PLA Silk @BBL X1C", - "sub_path": "filament/Bambu PLA Silk @BBL X1C.json" - }, - { - "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL X2D", - "sub_path": "filament/Bambu PLA Silk @BBL X2D.json" - }, - { - "name": "Bambu PLA Silk @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A1", - "sub_path": "filament/Bambu PLA Silk+ @BBL A1.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A1M", - "sub_path": "filament/Bambu PLA Silk+ @BBL A1M.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2C", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2C.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2D", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2D.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2DP", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2DP.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2S", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2S.json" - }, - { - "name": "Bambu PLA Silk+ @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL P1P", - "sub_path": "filament/Bambu PLA Silk+ @BBL P1P.json" - }, - { - "name": "Bambu PLA Silk+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL P2S", - "sub_path": "filament/Bambu PLA Silk+ @BBL P2S.json" - }, - { - "name": "Bambu PLA Silk+ @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL X1", - "sub_path": "filament/Bambu PLA Silk+ @BBL X1.json" - }, - { - "name": "Bambu PLA Silk+ @BBL X1C", - "sub_path": "filament/Bambu PLA Silk+ @BBL X1C.json" - }, - { - "name": "Bambu PLA Silk+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL X2D", - "sub_path": "filament/Bambu PLA Silk+ @BBL X2D.json" - }, - { - "name": "Bambu PLA Silk+ @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Silk+ @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Sparkle @BBL A1", - "sub_path": "filament/Bambu PLA Sparkle @BBL A1.json" - }, - { - "name": "Bambu PLA Sparkle @BBL A1M", - "sub_path": "filament/Bambu PLA Sparkle @BBL A1M.json" - }, - { - "name": "Bambu PLA Sparkle @BBL A2L", - "sub_path": "filament/Bambu PLA Sparkle @BBL A2L.json" - }, - { - "name": "Bambu PLA Sparkle @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Sparkle @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Sparkle @BBL H2C", - "sub_path": "filament/Bambu PLA Sparkle @BBL H2C.json" - }, - { - "name": "Bambu PLA Sparkle @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Sparkle @BBL H2D", - "sub_path": "filament/Bambu PLA Sparkle @BBL H2D.json" - }, - { - "name": "Bambu PLA Sparkle @BBL H2DP", - "sub_path": "filament/Bambu PLA Sparkle @BBL H2DP.json" - }, - { - "name": "Bambu PLA Sparkle @BBL H2S", - "sub_path": "filament/Bambu PLA Sparkle @BBL H2S.json" - }, - { - "name": "Bambu PLA Sparkle @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Sparkle @BBL P1P.json" - }, - { - "name": "Bambu PLA Sparkle @BBL P2S", - "sub_path": "filament/Bambu PLA Sparkle @BBL P2S.json" - }, - { - "name": "Bambu PLA Sparkle @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Sparkle @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Sparkle @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Sparkle @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Sparkle @BBL X1", - "sub_path": "filament/Bambu PLA Sparkle @BBL X1.json" - }, - { - "name": "Bambu PLA Sparkle @BBL X1C", - "sub_path": "filament/Bambu PLA Sparkle @BBL X1C.json" - }, - { - "name": "Bambu PLA Sparkle @BBL X2D", - "sub_path": "filament/Bambu PLA Sparkle @BBL X2D.json" - }, - { - "name": "Bambu PLA Sparkle @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL A1", - "sub_path": "filament/Bambu PLA Tough @BBL A1.json" - }, - { - "name": "Bambu PLA Tough @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL A1M", - "sub_path": "filament/Bambu PLA Tough @BBL A1M.json" - }, - { - "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL A2L", - "sub_path": "filament/Bambu PLA Tough @BBL A2L.json" - }, - { - "name": "Bambu PLA Tough @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL H2C", - "sub_path": "filament/Bambu PLA Tough @BBL H2C.json" - }, - { - "name": "Bambu PLA Tough @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL H2D", - "sub_path": "filament/Bambu PLA Tough @BBL H2D.json" - }, - { - "name": "Bambu PLA Tough @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL H2DP", - "sub_path": "filament/Bambu PLA Tough @BBL H2DP.json" - }, - { - "name": "Bambu PLA Tough @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL H2S", - "sub_path": "filament/Bambu PLA Tough @BBL H2S.json" - }, - { - "name": "Bambu PLA Tough @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P.json" - }, - { - "name": "Bambu PLA Tough @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL P2S", - "sub_path": "filament/Bambu PLA Tough @BBL P2S.json" - }, - { - "name": "Bambu PLA Tough @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL X1", - "sub_path": "filament/Bambu PLA Tough @BBL X1.json" - }, - { - "name": "Bambu PLA Tough @BBL X1C", - "sub_path": "filament/Bambu PLA Tough @BBL X1C.json" - }, - { - "name": "Bambu PLA Tough @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL X2D", - "sub_path": "filament/Bambu PLA Tough @BBL X2D.json" - }, - { - "name": "Bambu PLA Tough @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A1", - "sub_path": "filament/Bambu PLA Tough+ @BBL A1.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A1M", - "sub_path": "filament/Bambu PLA Tough+ @BBL A1M.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A2L 0.4 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2C", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2C.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2C 0.6 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2D", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2D.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2DP", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2S", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2S.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA Tough+ @BBL P1P.json" - }, - { - "name": "Bambu PLA Tough+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL P2S", - "sub_path": "filament/Bambu PLA Tough+ @BBL P2S.json" - }, - { - "name": "Bambu PLA Tough+ @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL X1", - "sub_path": "filament/Bambu PLA Tough+ @BBL X1.json" - }, - { - "name": "Bambu PLA Tough+ @BBL X1C", - "sub_path": "filament/Bambu PLA Tough+ @BBL X1C.json" - }, - { - "name": "Bambu PLA Tough+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL X2D", - "sub_path": "filament/Bambu PLA Tough+ @BBL X2D.json" - }, - { - "name": "Bambu PLA Tough+ @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Tough+ @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL A1", - "sub_path": "filament/Bambu PLA Translucent @BBL A1.json" - }, - { - "name": "Bambu PLA Translucent @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL A1 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL A1 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL A1M", - "sub_path": "filament/Bambu PLA Translucent @BBL A1M.json" - }, - { - "name": "Bambu PLA Translucent @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL A1M 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL A2L", - "sub_path": "filament/Bambu PLA Translucent @BBL A2L.json" - }, - { - "name": "Bambu PLA Translucent @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2C", - "sub_path": "filament/Bambu PLA Translucent @BBL H2C.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2D", - "sub_path": "filament/Bambu PLA Translucent @BBL H2D.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2DP", - "sub_path": "filament/Bambu PLA Translucent @BBL H2DP.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2S", - "sub_path": "filament/Bambu PLA Translucent @BBL H2S.json" - }, - { - "name": "Bambu PLA Translucent @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL P1P", - "sub_path": "filament/Bambu PLA Translucent @BBL P1P.json" - }, - { - "name": "Bambu PLA Translucent @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL P1P 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL P1P 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL X1C", - "sub_path": "filament/Bambu PLA Translucent @BBL X1C.json" - }, - { - "name": "Bambu PLA Translucent @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL X2D 0.6 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Translucent @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL A1", - "sub_path": "filament/Bambu PLA Wood @BBL A1.json" - }, - { - "name": "Bambu PLA Wood @BBL A1M", - "sub_path": "filament/Bambu PLA Wood @BBL A1M.json" - }, - { - "name": "Bambu PLA Wood @BBL A2L", - "sub_path": "filament/Bambu PLA Wood @BBL A2L.json" - }, - { - "name": "Bambu PLA Wood @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL H2C", - "sub_path": "filament/Bambu PLA Wood @BBL H2C.json" - }, - { - "name": "Bambu PLA Wood @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL H2D", - "sub_path": "filament/Bambu PLA Wood @BBL H2D.json" - }, - { - "name": "Bambu PLA Wood @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL H2DP", - "sub_path": "filament/Bambu PLA Wood @BBL H2DP.json" - }, - { - "name": "Bambu PLA Wood @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL H2S", - "sub_path": "filament/Bambu PLA Wood @BBL H2S.json" - }, - { - "name": "Bambu PLA Wood @BBL P1P", - "sub_path": "filament/Bambu PLA Wood @BBL P1P.json" - }, - { - "name": "Bambu PLA Wood @BBL P2S", - "sub_path": "filament/Bambu PLA Wood @BBL P2S.json" - }, - { - "name": "Bambu PLA Wood @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL X1", - "sub_path": "filament/Bambu PLA Wood @BBL X1.json" - }, - { - "name": "Bambu PLA Wood @BBL X1C", - "sub_path": "filament/Bambu PLA Wood @BBL X1C.json" - }, - { - "name": "Bambu PLA Wood @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA Wood @BBL X2D", - "sub_path": "filament/Bambu PLA Wood @BBL X2D.json" - }, - { - "name": "Bambu PLA Wood @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL A1", - "sub_path": "filament/Bambu PLA-CF @BBL A1.json" - }, - { - "name": "Bambu PLA-CF @BBL A1 0.8 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL A1M", - "sub_path": "filament/Bambu PLA-CF @BBL A1M.json" - }, - { - "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL A2L", - "sub_path": "filament/Bambu PLA-CF @BBL A2L.json" - }, - { - "name": "Bambu PLA-CF @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL H2C", - "sub_path": "filament/Bambu PLA-CF @BBL H2C.json" - }, - { - "name": "Bambu PLA-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL H2S", - "sub_path": "filament/Bambu PLA-CF @BBL H2S.json" - }, - { - "name": "Bambu PLA-CF @BBL P1P", - "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P.json" - }, - { - "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle", - "sub_path": "filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL P2S 0.4 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL P2S 0.4 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL X1C", - "sub_path": "filament/Bambu PLA-CF @BBL X1C.json" - }, - { - "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json" - }, - { - "name": "Bambu PLA-CF @BBL X2D", - "sub_path": "filament/Bambu PLA-CF @BBL X2D.json" - }, - { - "name": "Bambu PLA-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL A1", - "sub_path": "filament/Bambu Support For PLA @BBL A1.json" - }, - { - "name": "Bambu Support For PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL A1M", - "sub_path": "filament/Bambu Support For PLA @BBL A1M.json" - }, - { - "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL A2L", - "sub_path": "filament/Bambu Support For PLA @BBL A2L.json" - }, - { - "name": "Bambu Support For PLA @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL H2C", - "sub_path": "filament/Bambu Support For PLA @BBL H2C.json" - }, - { - "name": "Bambu Support For PLA @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL H2D", - "sub_path": "filament/Bambu Support For PLA @BBL H2D.json" - }, - { - "name": "Bambu Support For PLA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL H2DP", - "sub_path": "filament/Bambu Support For PLA @BBL H2DP.json" - }, - { - "name": "Bambu Support For PLA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL H2S", - "sub_path": "filament/Bambu Support For PLA @BBL H2S.json" - }, - { - "name": "Bambu Support For PLA @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL P1P", - "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P.json" - }, - { - "name": "Bambu Support For PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL P2S", - "sub_path": "filament/Bambu Support For PLA @BBL P2S.json" - }, - { - "name": "Bambu Support For PLA @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL X1C", - "sub_path": "filament/Bambu Support For PLA @BBL X1C.json" - }, - { - "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL X2D", - "sub_path": "filament/Bambu Support For PLA @BBL X2D.json" - }, - { - "name": "Bambu Support For PLA @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL A1", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL A1M", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1M.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL A2L", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2C", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2D", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2DP", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2DP.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2S", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2S.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL P1P", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL P1P.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL P2S", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL P2S.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL X1C", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL X1C.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL X2D", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu Support For PLA/PETG @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu Support W @BBL A1", - "sub_path": "filament/Bambu Support W @BBL A1.json" - }, - { - "name": "Bambu Support W @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL A1M", - "sub_path": "filament/Bambu Support W @BBL A1M.json" - }, - { - "name": "Bambu Support W @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL A2L", - "sub_path": "filament/Bambu Support W @BBL A2L.json" - }, - { - "name": "Bambu Support W @BBL A2L 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL H2C", - "sub_path": "filament/Bambu Support W @BBL H2C.json" - }, - { - "name": "Bambu Support W @BBL H2C 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu Support W @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu Support W @BBL H2D", - "sub_path": "filament/Bambu Support W @BBL H2D.json" - }, - { - "name": "Bambu Support W @BBL H2D 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL H2DP", - "sub_path": "filament/Bambu Support W @BBL H2DP.json" - }, - { - "name": "Bambu Support W @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL H2S", - "sub_path": "filament/Bambu Support W @BBL H2S.json" - }, - { - "name": "Bambu Support W @BBL H2S 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL P1P", - "sub_path": "filament/P1P/Bambu Support W @BBL P1P.json" - }, - { - "name": "Bambu Support W @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL P2S", - "sub_path": "filament/Bambu Support W @BBL P2S.json" - }, - { - "name": "Bambu Support W @BBL P2S 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL X1", - "sub_path": "filament/Bambu Support W @BBL X1.json" - }, - { - "name": "Bambu Support W @BBL X1C", - "sub_path": "filament/Bambu Support W @BBL X1C.json" - }, - { - "name": "Bambu Support W @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL X2D", - "sub_path": "filament/Bambu Support W @BBL X2D.json" - }, - { - "name": "Bambu Support W @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu Support W @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu Support W @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu Support W @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PLA", - "sub_path": "filament/Generic PLA.json" - }, - { - "name": "Generic PLA @0.2 nozzle", - "sub_path": "filament/Generic PLA @0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL A1", - "sub_path": "filament/Generic PLA @BBL A1.json" - }, - { - "name": "Generic PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL A1M", - "sub_path": "filament/Generic PLA @BBL A1M.json" - }, - { - "name": "Generic PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL A2L", - "sub_path": "filament/Generic PLA @BBL A2L.json" - }, - { - "name": "Generic PLA @BBL A2L 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL H2C", - "sub_path": "filament/Generic PLA @BBL H2C.json" - }, - { - "name": "Generic PLA @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PLA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PLA @BBL H2D", - "sub_path": "filament/Generic PLA @BBL H2D.json" - }, - { - "name": "Generic PLA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL H2DP", - "sub_path": "filament/Generic PLA @BBL H2DP.json" - }, - { - "name": "Generic PLA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL H2S", - "sub_path": "filament/Generic PLA @BBL H2S.json" - }, - { - "name": "Generic PLA @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL P1P", - "sub_path": "filament/P1P/Generic PLA @BBL P1P.json" - }, - { - "name": "Generic PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL P2S", - "sub_path": "filament/Generic PLA @BBL P2S.json" - }, - { - "name": "Generic PLA @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL X2D", - "sub_path": "filament/Generic PLA @BBL X2D.json" - }, - { - "name": "Generic PLA @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic PLA @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic PLA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PLA E-PLA", - "sub_path": "filament/addnorth/addnorth PLA E-PLA.json" - }, - { - "name": "addnorth PLA Economy", - "sub_path": "filament/addnorth/addnorth PLA Economy.json" - }, - { - "name": "addnorth PLA HT-PLA PRO Matte", - "sub_path": "filament/addnorth/addnorth PLA HT-PLA PRO Matte.json" - }, - { - "name": "addnorth PLA Textura", - "sub_path": "filament/addnorth/addnorth PLA Textura.json" - }, - { - "name": "addnorth PLA Wood", - "sub_path": "filament/addnorth/addnorth PLA Wood.json" - }, - { - "name": "addnorth PLA X-PLA", - "sub_path": "filament/addnorth/addnorth PLA X-PLA.json" - }, - { - "name": "addnorth PLA rPLA RE-ADD", - "sub_path": "filament/addnorth/addnorth PLA rPLA RE-ADD.json" - }, - { - "name": "Generic PLA High Speed @BBL A1", - "sub_path": "filament/Generic PLA High Speed @BBL A1.json" - }, - { - "name": "Generic PLA High Speed @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL A1M", - "sub_path": "filament/Generic PLA High Speed @BBL A1M.json" - }, - { - "name": "Generic PLA High Speed @BBL A2L", - "sub_path": "filament/Generic PLA High Speed @BBL A2L.json" - }, - { - "name": "Generic PLA High Speed @BBL A2L 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL H2C", - "sub_path": "filament/Generic PLA High Speed @BBL H2C.json" - }, - { - "name": "Generic PLA High Speed @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL H2D", - "sub_path": "filament/Generic PLA High Speed @BBL H2D.json" - }, - { - "name": "Generic PLA High Speed @BBL H2D 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL H2DP", - "sub_path": "filament/Generic PLA High Speed @BBL H2DP.json" - }, - { - "name": "Generic PLA High Speed @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL H2S", - "sub_path": "filament/Generic PLA High Speed @BBL H2S.json" - }, - { - "name": "Generic PLA High Speed @BBL H2S 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL P1P", - "sub_path": "filament/Generic PLA High Speed @BBL P1P.json" - }, - { - "name": "Generic PLA High Speed @BBL P2S", - "sub_path": "filament/Generic PLA High Speed @BBL P2S.json" - }, - { - "name": "Generic PLA High Speed @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL X1C", - "sub_path": "filament/Generic PLA High Speed @BBL X1C.json" - }, - { - "name": "Generic PLA High Speed @BBL X2D", - "sub_path": "filament/Generic PLA High Speed @BBL X2D.json" - }, - { - "name": "Generic PLA High Speed @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PLA X-PLA High Speed", - "sub_path": "filament/addnorth/addnorth PLA X-PLA High Speed.json" - }, - { - "name": "Generic PLA Silk", - "sub_path": "filament/Generic PLA Silk.json" - }, - { - "name": "Generic PLA Silk @BBL A1", - "sub_path": "filament/Generic PLA Silk @BBL A1.json" - }, - { - "name": "Generic PLA Silk @BBL A1M", - "sub_path": "filament/Generic PLA Silk @BBL A1M.json" - }, - { - "name": "Generic PLA Silk @BBL A2L", - "sub_path": "filament/Generic PLA Silk @BBL A2L.json" - }, - { - "name": "Generic PLA Silk @BBL H2C", - "sub_path": "filament/Generic PLA Silk @BBL H2C.json" - }, - { - "name": "Generic PLA Silk @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PLA Silk @BBL H2D", - "sub_path": "filament/Generic PLA Silk @BBL H2D.json" - }, - { - "name": "Generic PLA Silk @BBL H2DP", - "sub_path": "filament/Generic PLA Silk @BBL H2DP.json" - }, - { - "name": "Generic PLA Silk @BBL H2S", - "sub_path": "filament/Generic PLA Silk @BBL H2S.json" - }, - { - "name": "Generic PLA Silk @BBL P1P", - "sub_path": "filament/P1P/Generic PLA Silk @BBL P1P.json" - }, - { - "name": "Generic PLA Silk @BBL P2S", - "sub_path": "filament/Generic PLA Silk @BBL P2S.json" - }, - { - "name": "Generic PLA Silk @BBL X2D", - "sub_path": "filament/Generic PLA Silk @BBL X2D.json" - }, - { - "name": "Generic PLA Silk @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PLA Premium Silk", - "sub_path": "filament/addnorth/addnorth PLA Premium Silk.json" - }, - { - "name": "Generic PLA-CF", - "sub_path": "filament/Generic PLA-CF.json" - }, - { - "name": "Generic PLA-CF @BBL A1", - "sub_path": "filament/Generic PLA-CF @BBL A1.json" - }, - { - "name": "Generic PLA-CF @BBL A1M", - "sub_path": "filament/Generic PLA-CF @BBL A1M.json" - }, - { - "name": "Generic PLA-CF @BBL A2L", - "sub_path": "filament/Generic PLA-CF @BBL A2L.json" - }, - { - "name": "Generic PLA-CF @BBL H2C", - "sub_path": "filament/Generic PLA-CF @BBL H2C.json" - }, - { - "name": "Generic PLA-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PLA-CF @BBL H2D", - "sub_path": "filament/Generic PLA-CF @BBL H2D.json" - }, - { - "name": "Generic PLA-CF @BBL H2DP", - "sub_path": "filament/Generic PLA-CF @BBL H2DP.json" - }, - { - "name": "Generic PLA-CF @BBL H2S", - "sub_path": "filament/Generic PLA-CF @BBL H2S.json" - }, - { - "name": "Generic PLA-CF @BBL P1P", - "sub_path": "filament/P1P/Generic PLA-CF @BBL P1P.json" - }, - { - "name": "Generic PLA-CF @BBL P2S", - "sub_path": "filament/Generic PLA-CF @BBL P2S.json" - }, - { - "name": "Generic PLA-CF @BBL X2D", - "sub_path": "filament/Generic PLA-CF @BBL X2D.json" - }, - { - "name": "Generic PLA-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth PLA-CF Carbon Fiber", - "sub_path": "filament/addnorth/addnorth PLA-CF Carbon Fiber.json" - }, - { - "name": "Numakers PLA+ @BBL A1", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json" - }, - { - "name": "Numakers PLA+ @BBL A1 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "Numakers PLA+ @BBL A1M", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M.json" - }, - { - "name": "Numakers PLA+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Numakers PLA+ @BBL P1P", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P.json" - }, - { - "name": "Numakers PLA+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Numakers PLA+ @BBL X1", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1.json" - }, - { - "name": "Numakers PLA+ @BBL X1C", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C.json" - }, - { - "name": "Numakers PLA+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL A1", - "sub_path": "filament/Overture/Overture Matte PLA @BBL A1.json" - }, - { - "name": "Overture Matte PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Matte PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL A1M", - "sub_path": "filament/Overture/Overture Matte PLA @BBL A1M.json" - }, - { - "name": "Overture Matte PLA @BBL H2D", - "sub_path": "filament/Overture Matte PLA @BBL H2D.json" - }, - { - "name": "Overture Matte PLA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL H2DP", - "sub_path": "filament/Overture Matte PLA @BBL H2DP.json" - }, - { - "name": "Overture Matte PLA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL H2S", - "sub_path": "filament/Overture Matte PLA @BBL H2S.json" - }, - { - "name": "Overture Matte PLA @BBL H2S 0.2 nozzle", - "sub_path": "filament/Overture Matte PLA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL P1P", - "sub_path": "filament/Overture/Overture Matte PLA @BBL P1P.json" - }, - { - "name": "Overture Matte PLA @BBL X1", - "sub_path": "filament/Overture/Overture Matte PLA @BBL X1.json" - }, - { - "name": "Overture Matte PLA @BBL X1C", - "sub_path": "filament/Overture/Overture Matte PLA @BBL X1C.json" - }, - { - "name": "Overture PLA @BBL A1", - "sub_path": "filament/Overture/Overture PLA @BBL A1.json" - }, - { - "name": "Overture PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture PLA @BBL A1M", - "sub_path": "filament/Overture/Overture PLA @BBL A1M.json" - }, - { - "name": "Overture PLA @BBL H2D", - "sub_path": "filament/Overture PLA @BBL H2D.json" - }, - { - "name": "Overture PLA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Overture PLA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "Overture PLA @BBL H2DP", - "sub_path": "filament/Overture PLA @BBL H2DP.json" - }, - { - "name": "Overture PLA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Overture PLA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Overture PLA @BBL H2S", - "sub_path": "filament/Overture PLA @BBL H2S.json" - }, - { - "name": "Overture PLA @BBL H2S 0.2 nozzle", - "sub_path": "filament/Overture PLA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "Overture PLA @BBL P1P", - "sub_path": "filament/Overture/Overture PLA @BBL P1P.json" - }, - { - "name": "Overture PLA @BBL X1", - "sub_path": "filament/Overture/Overture PLA @BBL X1.json" - }, - { - "name": "Overture PLA @BBL X1C", - "sub_path": "filament/Overture/Overture PLA @BBL X1C.json" - }, - { - "name": "Overture PLA Pro @BBL A1", - "sub_path": "filament/Overture/Overture PLA Pro @BBL A1.json" - }, - { - "name": "Overture PLA Pro @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA Pro @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture PLA Pro @BBL A1M", - "sub_path": "filament/Overture/Overture PLA Pro @BBL A1M.json" - }, - { - "name": "Overture PLA Pro @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA Pro @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture PLA Pro @BBL P1P", - "sub_path": "filament/Overture/Overture PLA Pro @BBL P1P.json" - }, - { - "name": "Overture PLA Pro @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA Pro @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture PLA Pro @BBL X1", - "sub_path": "filament/Overture/Overture PLA Pro @BBL X1.json" - }, - { - "name": "Overture PLA Pro @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA Pro @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture PLA Pro @BBL X1C", - "sub_path": "filament/Overture/Overture PLA Pro @BBL X1C.json" - }, - { - "name": "Overture PLA Pro @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA Pro @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma CoPE @BBL A1", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL A1.json" - }, - { - "name": "Panchroma CoPE @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma CoPE @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL A1M.json" - }, - { - "name": "Panchroma CoPE @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma CoPE @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL P1P.json" - }, - { - "name": "Panchroma CoPE @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma CoPE @BBL X1", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL X1.json" - }, - { - "name": "Panchroma CoPE @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma CoPE @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL X1C.json" - }, - { - "name": "Panchroma CoPE @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma CoPE @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL A1.json" - }, - { - "name": "Panchroma PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL A1M.json" - }, - { - "name": "Panchroma PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL P1P.json" - }, - { - "name": "Panchroma PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL X1.json" - }, - { - "name": "Panchroma PLA @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL X1C.json" - }, - { - "name": "Panchroma PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Celestial @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1.json" - }, - { - "name": "Panchroma PLA Celestial @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Celestial @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1M.json" - }, - { - "name": "Panchroma PLA Celestial @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Celestial @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL P1P.json" - }, - { - "name": "Panchroma PLA Celestial @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Celestial @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL X1.json" - }, - { - "name": "Panchroma PLA Celestial @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Celestial @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL X1C.json" - }, - { - "name": "Panchroma PLA Celestial @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL A1.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL A1M.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL P1P.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL X1.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL X1C.json" - }, - { - "name": "Panchroma PLA Galaxy @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Glow @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL A1.json" - }, - { - "name": "Panchroma PLA Glow @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Glow @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL A1M.json" - }, - { - "name": "Panchroma PLA Glow @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Glow @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL P1P.json" - }, - { - "name": "Panchroma PLA Glow @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Glow @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL X1.json" - }, - { - "name": "Panchroma PLA Glow @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Glow @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL X1C.json" - }, - { - "name": "Panchroma PLA Glow @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Luminous @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL A1.json" - }, - { - "name": "Panchroma PLA Luminous @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Luminous @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL A1M.json" - }, - { - "name": "Panchroma PLA Luminous @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Luminous @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL P1P.json" - }, - { - "name": "Panchroma PLA Luminous @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Luminous @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL X1.json" - }, - { - "name": "Panchroma PLA Luminous @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Luminous @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL X1C.json" - }, - { - "name": "Panchroma PLA Luminous @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Marble @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL A1.json" - }, - { - "name": "Panchroma PLA Marble @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Marble @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL A1M.json" - }, - { - "name": "Panchroma PLA Marble @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Marble @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL P1P.json" - }, - { - "name": "Panchroma PLA Marble @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Marble @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL X1.json" - }, - { - "name": "Panchroma PLA Marble @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Marble @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL X1C.json" - }, - { - "name": "Panchroma PLA Marble @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Matte @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL A1.json" - }, - { - "name": "Panchroma PLA Matte @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Matte @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL A1M.json" - }, - { - "name": "Panchroma PLA Matte @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Matte @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL P1P.json" - }, - { - "name": "Panchroma PLA Matte @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Matte @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL X1.json" - }, - { - "name": "Panchroma PLA Matte @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Matte @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL X1C.json" - }, - { - "name": "Panchroma PLA Matte @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Metallic @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL A1.json" - }, - { - "name": "Panchroma PLA Metallic @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Metallic @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL A1M.json" - }, - { - "name": "Panchroma PLA Metallic @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Metallic @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL P1P.json" - }, - { - "name": "Panchroma PLA Metallic @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Metallic @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL X1.json" - }, - { - "name": "Panchroma PLA Metallic @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Metallic @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL X1C.json" - }, - { - "name": "Panchroma PLA Metallic @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Neon @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL A1.json" - }, - { - "name": "Panchroma PLA Neon @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Neon @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL A1M.json" - }, - { - "name": "Panchroma PLA Neon @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Neon @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL P1P.json" - }, - { - "name": "Panchroma PLA Neon @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Neon @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL X1.json" - }, - { - "name": "Panchroma PLA Neon @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Neon @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL X1C.json" - }, - { - "name": "Panchroma PLA Neon @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Satin @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1.json" - }, - { - "name": "Panchroma PLA Satin @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Satin @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1M.json" - }, - { - "name": "Panchroma PLA Satin @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Satin @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL P1P.json" - }, - { - "name": "Panchroma PLA Satin @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Satin @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1.json" - }, - { - "name": "Panchroma PLA Satin @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Satin @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1C.json" - }, - { - "name": "Panchroma PLA Satin @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Silk @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL A1.json" - }, - { - "name": "Panchroma PLA Silk @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Silk @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL A1M.json" - }, - { - "name": "Panchroma PLA Silk @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Silk @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL P1P.json" - }, - { - "name": "Panchroma PLA Silk @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Silk @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1.json" - }, - { - "name": "Panchroma PLA Silk @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Silk @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C.json" - }, - { - "name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Starlight @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1.json" - }, - { - "name": "Panchroma PLA Starlight @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Starlight @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1M.json" - }, - { - "name": "Panchroma PLA Starlight @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Starlight @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL P1P.json" - }, - { - "name": "Panchroma PLA Starlight @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Starlight @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL X1.json" - }, - { - "name": "Panchroma PLA Starlight @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Starlight @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL X1C.json" - }, - { - "name": "Panchroma PLA Starlight @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL A1.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL X1.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C.json" - }, - { - "name": "Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Translucent @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL A1.json" - }, - { - "name": "Panchroma PLA Translucent @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Translucent @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL A1M.json" - }, - { - "name": "Panchroma PLA Translucent @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Translucent @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL P1P.json" - }, - { - "name": "Panchroma PLA Translucent @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Translucent @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL X1.json" - }, - { - "name": "Panchroma PLA Translucent @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA Translucent @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL X1C.json" - }, - { - "name": "Panchroma PLA Translucent @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL A1", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL A1.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL A1M", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL A1M.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL P1P", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL P1P.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL X1", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL X1.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL X1C", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL X1C.json" - }, - { - "name": "Panchroma PLA UV Shift @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json" - }, - { - "name": "PolyLite CosPLA @BBL A1", - "sub_path": "filament/Polymaker/PolyLite CosPLA @BBL A1.json" - }, - { - "name": "PolyLite CosPLA @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite CosPLA @BBL A1M.json" - }, - { - "name": "PolyLite CosPLA @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite CosPLA @BBL P1P.json" - }, - { - "name": "PolyLite CosPLA @BBL X1", - "sub_path": "filament/Polymaker/PolyLite CosPLA @BBL X1.json" - }, - { - "name": "PolyLite PLA @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL A1.json" - }, - { - "name": "PolyLite PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL A1M.json" - }, - { - "name": "PolyLite PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA @BBL H2D", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL H2D.json" - }, - { - "name": "PolyLite PLA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA @BBL H2DP", - "sub_path": "filament/PolyLite PLA @BBL H2DP.json" - }, - { - "name": "PolyLite PLA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA @BBL H2S", - "sub_path": "filament/PolyLite PLA @BBL H2S.json" - }, - { - "name": "PolyLite PLA @BBL H2S 0.2 nozzle", - "sub_path": "filament/PolyLite PLA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA @BBL P1P", - "sub_path": "filament/P1P/PolyLite PLA @BBL P1P.json" - }, - { - "name": "PolyLite PLA @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL X1.json" - }, - { - "name": "PolyLite PLA @BBL X1C", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL X1C.json" - }, - { - "name": "PolyLite PLA Galaxy @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA Galaxy @BBL A1.json" - }, - { - "name": "PolyLite PLA Galaxy @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA Galaxy @BBL A1M.json" - }, - { - "name": "PolyLite PLA Galaxy @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PLA Galaxy @BBL P1P.json" - }, - { - "name": "PolyLite PLA Galaxy @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA Galaxy @BBL X1.json" - }, - { - "name": "PolyLite PLA Glow @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA Glow @BBL A1.json" - }, - { - "name": "PolyLite PLA Glow @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA Glow @BBL A1M.json" - }, - { - "name": "PolyLite PLA Glow @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PLA Glow @BBL P1P.json" - }, - { - "name": "PolyLite PLA Glow @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA Glow @BBL X1.json" - }, - { - "name": "PolyLite PLA Luminous @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA Luminous @BBL A1.json" - }, - { - "name": "PolyLite PLA Luminous @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA Luminous @BBL A1M.json" - }, - { - "name": "PolyLite PLA Luminous @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PLA Luminous @BBL P1P.json" - }, - { - "name": "PolyLite PLA Luminous @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA Luminous @BBL X1.json" - }, - { - "name": "PolyLite PLA Neon @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA Neon @BBL A1.json" - }, - { - "name": "PolyLite PLA Neon @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA Neon @BBL A1M.json" - }, - { - "name": "PolyLite PLA Neon @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PLA Neon @BBL P1P.json" - }, - { - "name": "PolyLite PLA Neon @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA Neon @BBL X1.json" - }, - { - "name": "PolyLite PLA Pro @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL A1.json" - }, - { - "name": "PolyLite PLA Pro @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL A1 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA Pro @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL A1M.json" - }, - { - "name": "PolyLite PLA Pro @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA Pro @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL P1P.json" - }, - { - "name": "PolyLite PLA Pro @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA Pro @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL X1.json" - }, - { - "name": "PolyLite PLA Pro @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL X1 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA Pro @BBL X1C", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL X1C.json" - }, - { - "name": "PolyLite PLA Pro @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA Starlight @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA Starlight @BBL A1.json" - }, - { - "name": "PolyLite PLA Starlight @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA Starlight @BBL A1M.json" - }, - { - "name": "PolyLite PLA Starlight @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PLA Starlight @BBL P1P.json" - }, - { - "name": "PolyLite PLA Starlight @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA Starlight @BBL X1.json" - }, - { - "name": "PolyLite PLA Translucent @BBL A1", - "sub_path": "filament/Polymaker/PolyLite PLA Translucent @BBL A1.json" - }, - { - "name": "PolyLite PLA Translucent @BBL A1M", - "sub_path": "filament/Polymaker/PolyLite PLA Translucent @BBL A1M.json" - }, - { - "name": "PolyLite PLA Translucent @BBL P1P", - "sub_path": "filament/Polymaker/PolyLite PLA Translucent @BBL P1P.json" - }, - { - "name": "PolyLite PLA Translucent @BBL X1", - "sub_path": "filament/Polymaker/PolyLite PLA Translucent @BBL X1.json" - }, - { - "name": "PolyTerra PLA @BBL A1", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL A1.json" - }, - { - "name": "PolyTerra PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "PolyTerra PLA @BBL A1M", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL A1M.json" - }, - { - "name": "PolyTerra PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "PolyTerra PLA @BBL H2D", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL H2D.json" - }, - { - "name": "PolyTerra PLA @BBL H2D 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json" - }, - { - "name": "PolyTerra PLA @BBL H2DP", - "sub_path": "filament/PolyTerra PLA @BBL H2DP.json" - }, - { - "name": "PolyTerra PLA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "PolyTerra PLA @BBL H2S", - "sub_path": "filament/PolyTerra PLA @BBL H2S.json" - }, - { - "name": "PolyTerra PLA @BBL H2S 0.2 nozzle", - "sub_path": "filament/PolyTerra PLA @BBL H2S 0.2 nozzle.json" - }, - { - "name": "PolyTerra PLA @BBL P1P", - "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P.json" - }, - { - "name": "PolyTerra PLA @BBL X1", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL X1.json" - }, - { - "name": "PolyTerra PLA @BBL X1C", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL X1C.json" - }, - { - "name": "PolyTerra PLA Marble @BBL A1", - "sub_path": "filament/Polymaker/PolyTerra PLA Marble @BBL A1.json" - }, - { - "name": "PolyTerra PLA Marble @BBL A1M", - "sub_path": "filament/Polymaker/PolyTerra PLA Marble @BBL A1M.json" - }, - { - "name": "PolyTerra PLA Marble @BBL P1P", - "sub_path": "filament/Polymaker/PolyTerra PLA Marble @BBL P1P.json" - }, - { - "name": "PolyTerra PLA Marble @BBL X1", - "sub_path": "filament/Polymaker/PolyTerra PLA Marble @BBL X1.json" - }, - { - "name": "PolyTerra PLA+ @BBL A1", - "sub_path": "filament/Polymaker/PolyTerra PLA+ @BBL A1.json" - }, - { - "name": "PolyTerra PLA+ @BBL A1M", - "sub_path": "filament/Polymaker/PolyTerra PLA+ @BBL A1M.json" - }, - { - "name": "PolyTerra PLA+ @BBL P1P", - "sub_path": "filament/Polymaker/PolyTerra PLA+ @BBL P1P.json" - }, - { - "name": "PolyTerra PLA+ @BBL X1", - "sub_path": "filament/Polymaker/PolyTerra PLA+ @BBL X1.json" - }, - { - "name": "Polymaker HT-PLA @BBL A1", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL A1.json" - }, - { - "name": "Polymaker HT-PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA @BBL A1M", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL A1M.json" - }, - { - "name": "Polymaker HT-PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA @BBL P1P", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL P1P.json" - }, - { - "name": "Polymaker HT-PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA @BBL X1", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL X1.json" - }, - { - "name": "Polymaker HT-PLA @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA @BBL X1C", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL X1C.json" - }, - { - "name": "Polymaker HT-PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL A1", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL A1.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL A1 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL A1M", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL P1P", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL X1", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL X1.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL X1 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL X1C", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C.json" - }, - { - "name": "Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA Marble @BBL A1", - "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL A1.json" - }, - { - "name": "SUNLU PLA Marble @BBL A1M", - "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL A1M.json" - }, - { - "name": "SUNLU PLA Marble @BBL P1P", - "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL P1P.json" - }, - { - "name": "SUNLU PLA Marble @BBL X1", - "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL X1.json" - }, - { - "name": "SUNLU PLA Marble @BBL X1C", - "sub_path": "filament/SUNLU/SUNLU Marble PLA @BBL X1C.json" - }, - { - "name": "SUNLU PLA Matte @BBL A1", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1.json" - }, - { - "name": "SUNLU PLA Matte @BBL A1 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA Matte @BBL A1M", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1M.json" - }, - { - "name": "SUNLU PLA Matte @BBL A1M 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA Matte @BBL P1P", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL P1P.json" - }, - { - "name": "SUNLU PLA Matte @BBL P1P 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA Matte @BBL X1", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL X1.json" - }, - { - "name": "SUNLU PLA Matte @BBL X1C", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL X1C.json" - }, - { - "name": "SUNLU PLA Matte @BBL X1C 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL A1", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL A1M", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL P1P", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL X1", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL X1C", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json" - }, - { - "name": "SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ @BBL A1", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1.json" - }, - { - "name": "SUNLU PLA+ @BBL A1 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ @BBL A1M", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1M.json" - }, - { - "name": "SUNLU PLA+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ @BBL P1P", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL P1P.json" - }, - { - "name": "SUNLU PLA+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "SUNLU PLA+ @BBL X1", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL X1.json" - }, - { - "name": "SUNLU PLA+ @BBL X1C", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL X1C.json" - }, - { - "name": "SUNLU PLA+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL A1", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL A1 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL A1M", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL P1P", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL X1", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL X1C", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json" - }, - { - "name": "SUNLU Silk PLA+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json" - }, - { - "name": "SUNLU Wood PLA @BBL A1", - "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL A1.json" - }, - { - "name": "SUNLU Wood PLA @BBL A1M", - "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL A1M.json" - }, - { - "name": "SUNLU Wood PLA @BBL P1P", - "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL P1P.json" - }, - { - "name": "SUNLU Wood PLA @BBL X1", - "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL X1.json" - }, - { - "name": "SUNLU Wood PLA @BBL X1C", - "sub_path": "filament/SUNLU/SUNLU Wood PLA @BBL X1C.json" - }, - { - "name": "eSUN PLA+ @BBL A1", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL A1.json" - }, - { - "name": "eSUN PLA+ @BBL A1 0.2 nozzle", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "eSUN PLA+ @BBL A1M", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL A1M.json" - }, - { - "name": "eSUN PLA+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "eSUN PLA+ @BBL H2D", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL H2D.json" - }, - { - "name": "eSUN PLA+ @BBL H2D 0.2 nozzle", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json" - }, - { - "name": "eSUN PLA+ @BBL H2DP", - "sub_path": "filament/eSUN PLA+ @BBL H2DP.json" - }, - { - "name": "eSUN PLA+ @BBL H2DP 0.2 nozzle", - "sub_path": "filament/eSUN PLA+ @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "eSUN PLA+ @BBL H2S", - "sub_path": "filament/eSUN PLA+ @BBL H2S.json" - }, - { - "name": "eSUN PLA+ @BBL H2S 0.2 nozzle", - "sub_path": "filament/eSUN PLA+ @BBL H2S 0.2 nozzle.json" - }, - { - "name": "eSUN PLA+ @BBL P1P", - "sub_path": "filament/P1P/eSUN PLA+ @BBL P1P.json" - }, - { - "name": "eSUN PLA+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "eSUN PLA+ @BBL X1", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL X1.json" - }, - { - "name": "eSUN PLA+ @BBL X1C", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL X1C.json" - }, - { - "name": "eSUN PLA+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/eSUN/eSUN PLA+ @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Generic PP @BBL A1", - "sub_path": "filament/Generic PP @BBL A1.json" - }, - { - "name": "Generic PP @BBL A1M", - "sub_path": "filament/Generic PP @BBL A1M.json" - }, - { - "name": "Generic PP @BBL A2L", - "sub_path": "filament/Generic PP @BBL A2L.json" - }, - { - "name": "Generic PP @BBL H2C", - "sub_path": "filament/Generic PP @BBL H2C.json" - }, - { - "name": "Generic PP @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PP @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PP @BBL H2D", - "sub_path": "filament/Generic PP @BBL H2D.json" - }, - { - "name": "Generic PP @BBL H2DP", - "sub_path": "filament/Generic PP @BBL H2DP.json" - }, - { - "name": "Generic PP @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PP @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PP @BBL P2S", - "sub_path": "filament/Generic PP @BBL P2S.json" - }, - { - "name": "Generic PP @BBL X1C", - "sub_path": "filament/Generic PP @BBL X1C.json" - }, - { - "name": "Generic PP @BBL X2D", - "sub_path": "filament/Generic PP @BBL X2D.json" - }, - { - "name": "Generic PP @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PP @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PP-CF @BBL A1", - "sub_path": "filament/Generic PP-CF @BBL A1.json" - }, - { - "name": "Generic PP-CF @BBL H2C", - "sub_path": "filament/Generic PP-CF @BBL H2C.json" - }, - { - "name": "Generic PP-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PP-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PP-CF @BBL H2D", - "sub_path": "filament/Generic PP-CF @BBL H2D.json" - }, - { - "name": "Generic PP-CF @BBL H2DP", - "sub_path": "filament/Generic PP-CF @BBL H2DP.json" - }, - { - "name": "Generic PP-CF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PP-CF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PP-CF @BBL P2S", - "sub_path": "filament/Generic PP-CF @BBL P2S.json" - }, - { - "name": "Generic PP-CF @BBL X1C", - "sub_path": "filament/Generic PP-CF @BBL X1C.json" - }, - { - "name": "Generic PP-CF @BBL X2D", - "sub_path": "filament/Generic PP-CF @BBL X2D.json" - }, - { - "name": "Generic PP-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PP-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PP-GF @BBL A1", - "sub_path": "filament/Generic PP-GF @BBL A1.json" - }, - { - "name": "Generic PP-GF @BBL H2C", - "sub_path": "filament/Generic PP-GF @BBL H2C.json" - }, - { - "name": "Generic PP-GF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PP-GF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PP-GF @BBL H2D", - "sub_path": "filament/Generic PP-GF @BBL H2D.json" - }, - { - "name": "Generic PP-GF @BBL H2DP", - "sub_path": "filament/Generic PP-GF @BBL H2DP.json" - }, - { - "name": "Generic PP-GF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PP-GF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PP-GF @BBL P2S", - "sub_path": "filament/Generic PP-GF @BBL P2S.json" - }, - { - "name": "Generic PP-GF @BBL X1C", - "sub_path": "filament/Generic PP-GF @BBL X1C.json" - }, - { - "name": "Generic PP-GF @BBL X2D", - "sub_path": "filament/Generic PP-GF @BBL X2D.json" - }, - { - "name": "Generic PP-GF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PP-GF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PPA-CF @BBL H2C", - "sub_path": "filament/Bambu PPA-CF @BBL H2C.json" - }, - { - "name": "Bambu PPA-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PPA-CF @BBL H2D", - "sub_path": "filament/Bambu PPA-CF @BBL H2D.json" - }, - { - "name": "Bambu PPA-CF @BBL H2DP", - "sub_path": "filament/Bambu PPA-CF @BBL H2DP.json" - }, - { - "name": "Bambu PPA-CF @BBL H2S", - "sub_path": "filament/Bambu PPA-CF @BBL H2S.json" - }, - { - "name": "Bambu PPA-CF @BBL P2S", - "sub_path": "filament/Bambu PPA-CF @BBL P2S.json" - }, - { - "name": "Bambu PPA-CF @BBL X1C", - "sub_path": "filament/Bambu PPA-CF @BBL X1C.json" - }, - { - "name": "Bambu PPA-CF @BBL X1E", - "sub_path": "filament/Bambu PPA-CF @BBL X1E.json" - }, - { - "name": "Bambu PPA-CF @BBL X2D", - "sub_path": "filament/Bambu PPA-CF @BBL X2D.json" - }, - { - "name": "Bambu PPA-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PPA-CF @BBL H2C", - "sub_path": "filament/Generic PPA-CF @BBL H2C.json" - }, - { - "name": "Generic PPA-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PPA-CF @BBL H2D", - "sub_path": "filament/Generic PPA-CF @BBL H2D.json" - }, - { - "name": "Generic PPA-CF @BBL H2DP", - "sub_path": "filament/Generic PPA-CF @BBL H2DP.json" - }, - { - "name": "Generic PPA-CF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PPA-CF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PPA-CF @BBL P2S", - "sub_path": "filament/Generic PPA-CF @BBL P2S.json" - }, - { - "name": "Generic PPA-CF @BBL X1C", - "sub_path": "filament/Generic PPA-CF @BBL X1C.json" - }, - { - "name": "Generic PPA-CF @BBL X1E", - "sub_path": "filament/Generic PPA-CF @BBL X1E.json" - }, - { - "name": "Generic PPA-CF @BBL X2D", - "sub_path": "filament/Generic PPA-CF @BBL X2D.json" - }, - { - "name": "Generic PPA-CF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PPA-GF @BBL H2C", - "sub_path": "filament/Generic PPA-GF @BBL H2C.json" - }, - { - "name": "Generic PPA-GF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PPA-GF @BBL H2D", - "sub_path": "filament/Generic PPA-GF @BBL H2D.json" - }, - { - "name": "Generic PPA-GF @BBL H2DP", - "sub_path": "filament/Generic PPA-GF @BBL H2DP.json" - }, - { - "name": "Generic PPA-GF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PPA-GF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PPA-GF @BBL P2S", - "sub_path": "filament/Generic PPA-GF @BBL P2S.json" - }, - { - "name": "Generic PPA-GF @BBL X1C", - "sub_path": "filament/Generic PPA-GF @BBL X1C.json" - }, - { - "name": "Generic PPA-GF @BBL X1E", - "sub_path": "filament/Generic PPA-GF @BBL X1E.json" - }, - { - "name": "Generic PPA-GF @BBL X2D", - "sub_path": "filament/Generic PPA-GF @BBL X2D.json" - }, - { - "name": "Generic PPA-GF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu PPS-CF @BBL H2C", - "sub_path": "filament/Bambu PPS-CF @BBL H2C.json" - }, - { - "name": "Bambu PPS-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PPS-CF @BBL H2D", - "sub_path": "filament/Bambu PPS-CF @BBL H2D.json" - }, - { - "name": "Bambu PPS-CF @BBL H2DP", - "sub_path": "filament/Bambu PPS-CF @BBL H2DP.json" - }, - { - "name": "Bambu PPS-CF @BBL H2S", - "sub_path": "filament/Bambu PPS-CF @BBL H2S.json" - }, - { - "name": "Bambu PPS-CF @BBL X1E", - "sub_path": "filament/Bambu PPS-CF @BBL X1E.json" - }, - { - "name": "Generic PPS @BBL H2C", - "sub_path": "filament/Generic PPS @BBL H2C.json" - }, - { - "name": "Generic PPS @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PPS @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PPS @BBL H2D", - "sub_path": "filament/Generic PPS @BBL H2D.json" - }, - { - "name": "Generic PPS @BBL H2DP", - "sub_path": "filament/Generic PPS @BBL H2DP.json" - }, - { - "name": "Generic PPS @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PPS @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PPS @BBL X1E", - "sub_path": "filament/Generic PPS @BBL X1E.json" - }, - { - "name": "Generic PPS-CF @BBL H2C", - "sub_path": "filament/Generic PPS-CF @BBL H2C.json" - }, - { - "name": "Generic PPS-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PPS-CF @BBL H2D", - "sub_path": "filament/Generic PPS-CF @BBL H2D.json" - }, - { - "name": "Generic PPS-CF @BBL H2DP", - "sub_path": "filament/Generic PPS-CF @BBL H2DP.json" - }, - { - "name": "Generic PPS-CF @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PPS-CF @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PPS-CF @BBL X1E", - "sub_path": "filament/Generic PPS-CF @BBL X1E.json" - }, - { - "name": "Bambu PVA @BBL A1", - "sub_path": "filament/Bambu PVA @BBL A1.json" - }, - { - "name": "Bambu PVA @BBL A1 0.2 nozzle", - "sub_path": "filament/Bambu PVA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Bambu PVA @BBL A1M", - "sub_path": "filament/Bambu PVA @BBL A1M.json" - }, - { - "name": "Bambu PVA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Bambu PVA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Bambu PVA @BBL A2L", - "sub_path": "filament/Bambu PVA @BBL A2L.json" - }, - { - "name": "Bambu PVA @BBL H2C", - "sub_path": "filament/Bambu PVA @BBL H2C.json" - }, - { - "name": "Bambu PVA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu PVA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu PVA @BBL H2D", - "sub_path": "filament/Bambu PVA @BBL H2D.json" - }, - { - "name": "Bambu PVA @BBL H2DP", - "sub_path": "filament/Bambu PVA @BBL H2DP.json" - }, - { - "name": "Bambu PVA @BBL H2S", - "sub_path": "filament/Bambu PVA @BBL H2S.json" - }, - { - "name": "Bambu PVA @BBL P1P", - "sub_path": "filament/Bambu PVA @BBL P1P.json" - }, - { - "name": "Bambu PVA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PVA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PVA @BBL P2S", - "sub_path": "filament/Bambu PVA @BBL P2S.json" - }, - { - "name": "Bambu PVA @BBL X1C", - "sub_path": "filament/Bambu PVA @BBL X1C.json" - }, - { - "name": "Bambu PVA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PVA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PVA @BBL X2D", - "sub_path": "filament/Bambu PVA @BBL X2D.json" - }, - { - "name": "Bambu PVA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu PVA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic PVA", - "sub_path": "filament/Generic PVA.json" - }, - { - "name": "Generic PVA @0.2 nozzle", - "sub_path": "filament/Generic PVA @0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL A1", - "sub_path": "filament/Generic PVA @BBL A1.json" - }, - { - "name": "Generic PVA @BBL A1 0.2 nozzle", - "sub_path": "filament/Generic PVA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL A1M", - "sub_path": "filament/Generic PVA @BBL A1M.json" - }, - { - "name": "Generic PVA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Generic PVA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL A2L", - "sub_path": "filament/Generic PVA @BBL A2L.json" - }, - { - "name": "Generic PVA @BBL A2L 0.2 nozzle", - "sub_path": "filament/Generic PVA @BBL A2L 0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL H2C", - "sub_path": "filament/Generic PVA @BBL H2C.json" - }, - { - "name": "Generic PVA @BBL H2C 0.2 nozzle", - "sub_path": "filament/Generic PVA @BBL H2C 0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PVA @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PVA @BBL H2D", - "sub_path": "filament/Generic PVA @BBL H2D.json" - }, - { - "name": "Generic PVA @BBL H2DP", - "sub_path": "filament/Generic PVA @BBL H2DP.json" - }, - { - "name": "Generic PVA @BBL H2S 0.4 nozzle", - "sub_path": "filament/Generic PVA @BBL H2S 0.4 nozzle.json" - }, - { - "name": "Generic PVA @BBL P1P", - "sub_path": "filament/P1P/Generic PVA @BBL P1P.json" - }, - { - "name": "Generic PVA @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL P2S", - "sub_path": "filament/Generic PVA @BBL P2S.json" - }, - { - "name": "Generic PVA @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic PVA @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL X2D", - "sub_path": "filament/Generic PVA @BBL X2D.json" - }, - { - "name": "Generic PVA @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic PVA @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Generic PVA @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic PVA @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic SBS", - "sub_path": "filament/Generic SBS.json" - }, - { - "name": "BETA PEBA 90A @BBL A1", - "sub_path": "filament/BETA/BETA PEBA 90A @BBL A1.json" - }, - { - "name": "BETA PEBA 90A @BBL A1M", - "sub_path": "filament/BETA/BETA PEBA 90A @BBL A1M.json" - }, - { - "name": "BETA PEBA 90A @BBL H2D", - "sub_path": "filament/BETA/BETA PEBA 90A @BBL H2D.json" - }, - { - "name": "BETA PEBA 90A @BBL P1P", - "sub_path": "filament/BETA/BETA PEBA 90A @BBL P1P.json" - }, - { - "name": "BETA PEBA 90A @BBL X1C", - "sub_path": "filament/BETA/BETA PEBA 90A @BBL X1C.json" - }, - { - "name": "BETA TPU 90A @BBL A1", - "sub_path": "filament/BETA/BETA TPU 90A @BBL A1.json" - }, - { - "name": "BETA TPU 90A @BBL A1M", - "sub_path": "filament/BETA/BETA TPU 90A @BBL A1M.json" - }, - { - "name": "BETA TPU 90A @BBL H2D", - "sub_path": "filament/BETA/BETA TPU 90A @BBL H2D.json" - }, - { - "name": "BETA TPU 90A @BBL P1P", - "sub_path": "filament/BETA/BETA TPU 90A @BBL P1P.json" - }, - { - "name": "BETA TPU 90A @BBL X1C", - "sub_path": "filament/BETA/BETA TPU 90A @BBL X1C.json" - }, - { - "name": "BETA TPU 95A @BBL A1", - "sub_path": "filament/BETA/BETA TPU 95A @BBL A1.json" - }, - { - "name": "BETA TPU 95A @BBL A1M", - "sub_path": "filament/BETA/BETA TPU 95A @BBL A1M.json" - }, - { - "name": "BETA TPU 95A @BBL H2D", - "sub_path": "filament/BETA/BETA TPU 95A @BBL H2D.json" - }, - { - "name": "BETA TPU 95A @BBL P1P", - "sub_path": "filament/BETA/BETA TPU 95A @BBL P1P.json" - }, - { - "name": "BETA TPU 95A @BBL X1C", - "sub_path": "filament/BETA/BETA TPU 95A @BBL X1C.json" - }, - { - "name": "BETA TPU 98A @BBL A1", - "sub_path": "filament/BETA/BETA TPU 98A @BBL A1.json" - }, - { - "name": "BETA TPU 98A @BBL A1M", - "sub_path": "filament/BETA/BETA TPU 98A @BBL A1M.json" - }, - { - "name": "BETA TPU 98A @BBL H2D", - "sub_path": "filament/BETA/BETA TPU 98A @BBL H2D.json" - }, - { - "name": "BETA TPU 98A @BBL P1P", - "sub_path": "filament/BETA/BETA TPU 98A @BBL P1P.json" - }, - { - "name": "BETA TPU 98A @BBL X1C", - "sub_path": "filament/BETA/BETA TPU 98A @BBL X1C.json" - }, - { - "name": "BETA TPU Matte @BBL A1", - "sub_path": "filament/BETA/BETA TPU Matte @BBL A1.json" - }, - { - "name": "BETA TPU Matte @BBL A1M", - "sub_path": "filament/BETA/BETA TPU Matte @BBL A1M.json" - }, - { - "name": "BETA TPU Matte @BBL H2D", - "sub_path": "filament/BETA/BETA TPU Matte @BBL H2D.json" - }, - { - "name": "BETA TPU Matte @BBL P1P", - "sub_path": "filament/BETA/BETA TPU Matte @BBL P1P.json" - }, - { - "name": "BETA TPU Matte @BBL X1C", - "sub_path": "filament/BETA/BETA TPU Matte @BBL X1C.json" - }, - { - "name": "Bambu TPU 85A @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 85A @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 85A @BBL H2C", - "sub_path": "filament/Bambu TPU 85A @BBL H2C.json" - }, - { - "name": "Bambu TPU 85A @BBL H2D", - "sub_path": "filament/Bambu TPU 85A @BBL H2D.json" - }, - { - "name": "Bambu TPU 85A @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 85A @BBL H2DP", - "sub_path": "filament/Bambu TPU 85A @BBL H2DP.json" - }, - { - "name": "Bambu TPU 85A @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 85A @BBL H2S", - "sub_path": "filament/Bambu TPU 85A @BBL H2S.json" - }, - { - "name": "Bambu TPU 85A @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 85A @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 85A @BBL P1P", - "sub_path": "filament/Bambu TPU 85A @BBL P1P.json" - }, - { - "name": "Bambu TPU 85A @BBL P2S", - "sub_path": "filament/Bambu TPU 85A @BBL P2S.json" - }, - { - "name": "Bambu TPU 85A @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 85A @BBL X1C", - "sub_path": "filament/Bambu TPU 85A @BBL X1C.json" - }, - { - "name": "Bambu TPU 85A @BBL X2D", - "sub_path": "filament/Bambu TPU 85A @BBL X2D.json" - }, - { - "name": "Bambu TPU 85A @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL A1", - "sub_path": "filament/Bambu TPU 90A @BBL A1.json" - }, - { - "name": "Bambu TPU 90A @BBL A1M", - "sub_path": "filament/Bambu TPU 90A @BBL A1M.json" - }, - { - "name": "Bambu TPU 90A @BBL A2L", - "sub_path": "filament/Bambu TPU 90A @BBL A2L.json" - }, - { - "name": "Bambu TPU 90A @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL H2C", - "sub_path": "filament/Bambu TPU 90A @BBL H2C.json" - }, - { - "name": "Bambu TPU 90A @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL H2D", - "sub_path": "filament/Bambu TPU 90A @BBL H2D.json" - }, - { - "name": "Bambu TPU 90A @BBL H2D 0.6 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL H2D 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL H2D 0.8 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL H2D 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL H2DP", - "sub_path": "filament/Bambu TPU 90A @BBL H2DP.json" - }, - { - "name": "Bambu TPU 90A @BBL H2DP 0.6 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL H2DP 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL H2DP 0.8 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL H2DP 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL H2S", - "sub_path": "filament/Bambu TPU 90A @BBL H2S.json" - }, - { - "name": "Bambu TPU 90A @BBL H2S 0.6 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL H2S 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL H2S 0.8 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL H2S 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL P1P", - "sub_path": "filament/Bambu TPU 90A @BBL P1P.json" - }, - { - "name": "Bambu TPU 90A @BBL P2S", - "sub_path": "filament/Bambu TPU 90A @BBL P2S.json" - }, - { - "name": "Bambu TPU 90A @BBL P2S 0.6 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL P2S 0.8 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL X1C", - "sub_path": "filament/Bambu TPU 90A @BBL X1C.json" - }, - { - "name": "Bambu TPU 90A @BBL X2D", - "sub_path": "filament/Bambu TPU 90A @BBL X2D.json" - }, - { - "name": "Bambu TPU 90A @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 90A @BBL X2D 0.8 nozzle", - "sub_path": "filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 95A @BBL A1", - "sub_path": "filament/Bambu TPU 95A @BBL A1.json" - }, - { - "name": "Bambu TPU 95A @BBL A1M", - "sub_path": "filament/Bambu TPU 95A @BBL A1M.json" - }, - { - "name": "Bambu TPU 95A @BBL A2L", - "sub_path": "filament/Bambu TPU 95A @BBL A2L.json" - }, - { - "name": "Bambu TPU 95A @BBL H2C", - "sub_path": "filament/Bambu TPU 95A @BBL H2C.json" - }, - { - "name": "Bambu TPU 95A @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 95A @BBL H2D", - "sub_path": "filament/Bambu TPU 95A @BBL H2D.json" - }, - { - "name": "Bambu TPU 95A @BBL H2DP", - "sub_path": "filament/Bambu TPU 95A @BBL H2DP.json" - }, - { - "name": "Bambu TPU 95A @BBL H2S", - "sub_path": "filament/Bambu TPU 95A @BBL H2S.json" - }, - { - "name": "Bambu TPU 95A @BBL P1P", - "sub_path": "filament/P1P/Bambu TPU 95A @BBL P1P.json" - }, - { - "name": "Bambu TPU 95A @BBL P2S", - "sub_path": "filament/Bambu TPU 95A @BBL P2S.json" - }, - { - "name": "Bambu TPU 95A @BBL X1", - "sub_path": "filament/Bambu TPU 95A @BBL X1.json" - }, - { - "name": "Bambu TPU 95A @BBL X1C", - "sub_path": "filament/Bambu TPU 95A @BBL X1C.json" - }, - { - "name": "Bambu TPU 95A @BBL X2D", - "sub_path": "filament/Bambu TPU 95A @BBL X2D.json" - }, - { - "name": "Bambu TPU 95A @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 95A HF @BBL A1", - "sub_path": "filament/Bambu TPU 95A HF @BBL A1.json" - }, - { - "name": "Bambu TPU 95A HF @BBL A1M", - "sub_path": "filament/Bambu TPU 95A HF @BBL A1M.json" - }, - { - "name": "Bambu TPU 95A HF @BBL A2L", - "sub_path": "filament/Bambu TPU 95A HF @BBL A2L.json" - }, - { - "name": "Bambu TPU 95A HF @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu TPU 95A HF @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu TPU 95A HF @BBL H2C", - "sub_path": "filament/Bambu TPU 95A HF @BBL H2C.json" - }, - { - "name": "Bambu TPU 95A HF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 95A HF @BBL H2D", - "sub_path": "filament/Bambu TPU 95A HF @BBL H2D.json" - }, - { - "name": "Bambu TPU 95A HF @BBL H2DP", - "sub_path": "filament/Bambu TPU 95A HF @BBL H2DP.json" - }, - { - "name": "Bambu TPU 95A HF @BBL H2S", - "sub_path": "filament/Bambu TPU 95A HF @BBL H2S.json" - }, - { - "name": "Bambu TPU 95A HF @BBL P1P", - "sub_path": "filament/Bambu TPU 95A HF @BBL P1P.json" - }, - { - "name": "Bambu TPU 95A HF @BBL P1S", - "sub_path": "filament/Bambu TPU 95A HF @BBL P1S.json" - }, - { - "name": "Bambu TPU 95A HF @BBL P2S", - "sub_path": "filament/Bambu TPU 95A HF @BBL P2S.json" - }, - { - "name": "Bambu TPU 95A HF @BBL X1", - "sub_path": "filament/Bambu TPU 95A HF @BBL X1.json" - }, - { - "name": "Bambu TPU 95A HF @BBL X1C", - "sub_path": "filament/Bambu TPU 95A HF @BBL X1C.json" - }, - { - "name": "Bambu TPU 95A HF @BBL X1E", - "sub_path": "filament/Bambu TPU 95A HF @BBL X1E.json" - }, - { - "name": "Bambu TPU 95A HF @BBL X2D", - "sub_path": "filament/Bambu TPU 95A HF @BBL X2D.json" - }, - { - "name": "Bambu TPU 95A HF @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Bambu TPU for AMS @BBL A1", - "sub_path": "filament/Bambu TPU for AMS @BBL A1.json" - }, - { - "name": "Bambu TPU for AMS @BBL A1M", - "sub_path": "filament/Bambu TPU for AMS @BBL A1M.json" - }, - { - "name": "Bambu TPU for AMS @BBL A2L", - "sub_path": "filament/Bambu TPU for AMS @BBL A2L.json" - }, - { - "name": "Bambu TPU for AMS @BBL A2L 0.6 nozzle", - "sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json" - }, - { - "name": "Bambu TPU for AMS @BBL A2L 0.8 nozzle", - "sub_path": "filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json" - }, - { - "name": "Bambu TPU for AMS @BBL H2C", - "sub_path": "filament/Bambu TPU for AMS @BBL H2C.json" - }, - { - "name": "Bambu TPU for AMS @BBL H2C 0.4 nozzle", - "sub_path": "filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Bambu TPU for AMS @BBL H2D", - "sub_path": "filament/Bambu TPU for AMS @BBL H2D.json" - }, - { - "name": "Bambu TPU for AMS @BBL H2DP", - "sub_path": "filament/Bambu TPU for AMS @BBL H2DP.json" - }, - { - "name": "Bambu TPU for AMS @BBL H2S", - "sub_path": "filament/Bambu TPU for AMS @BBL H2S.json" - }, - { - "name": "Bambu TPU for AMS @BBL P1P", - "sub_path": "filament/Bambu TPU for AMS @BBL P1P.json" - }, - { - "name": "Bambu TPU for AMS @BBL P2S", - "sub_path": "filament/Bambu TPU for AMS @BBL P2S.json" - }, - { - "name": "Bambu TPU for AMS @BBL X1C", - "sub_path": "filament/Bambu TPU for AMS @BBL X1C.json" - }, - { - "name": "Bambu TPU for AMS @BBL X2D", - "sub_path": "filament/Bambu TPU for AMS @BBL X2D.json" - }, - { - "name": "Bambu TPU for AMS @BBL X2D 0.4 nozzle", - "sub_path": "filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic TPU", - "sub_path": "filament/Generic TPU.json" - }, - { - "name": "Generic TPU @BBL H2C", - "sub_path": "filament/Generic TPU @BBL H2C.json" - }, - { - "name": "Generic TPU @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic TPU @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic TPU @BBL H2D", - "sub_path": "filament/Generic TPU @BBL H2D.json" - }, - { - "name": "Generic TPU @BBL H2DP", - "sub_path": "filament/Generic TPU @BBL H2DP.json" - }, - { - "name": "Generic TPU @BBL P1P", - "sub_path": "filament/P1P/Generic TPU @BBL P1P.json" - }, - { - "name": "Generic TPU @BBL P2S", - "sub_path": "filament/Generic TPU @BBL P2S.json" - }, - { - "name": "Generic TPU @BBL X2D", - "sub_path": "filament/Generic TPU @BBL X2D.json" - }, - { - "name": "Generic TPU @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json" - }, - { - "name": "addnorth TPU EasyFlex", - "sub_path": "filament/addnorth/addnorth TPU EasyFlex.json" - }, - { - "name": "addnorth TPU Pro Matte 85A", - "sub_path": "filament/addnorth/addnorth TPU Pro Matte 85A.json" - }, - { - "name": "addnorth TPU Pro Matte 95A", - "sub_path": "filament/addnorth/addnorth TPU Pro Matte 95A.json" - }, - { - "name": "Generic TPU for AMS @BBL A1", - "sub_path": "filament/Generic TPU for AMS @BBL A1.json" - }, - { - "name": "Generic TPU for AMS @BBL A1M", - "sub_path": "filament/Generic TPU for AMS @BBL A1M.json" - }, - { - "name": "Generic TPU for AMS @BBL A2L", - "sub_path": "filament/Generic TPU for AMS @BBL A2L.json" - }, - { - "name": "Generic TPU for AMS @BBL H2C", - "sub_path": "filament/Generic TPU for AMS @BBL H2C.json" - }, - { - "name": "Generic TPU for AMS @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic TPU for AMS @BBL H2D", - "sub_path": "filament/Generic TPU for AMS @BBL H2D.json" - }, - { - "name": "Generic TPU for AMS @BBL H2DP", - "sub_path": "filament/Generic TPU for AMS @BBL H2DP.json" - }, - { - "name": "Generic TPU for AMS @BBL H2S", - "sub_path": "filament/Generic TPU for AMS @BBL H2S.json" - }, - { - "name": "Generic TPU for AMS @BBL P1P", - "sub_path": "filament/Generic TPU for AMS @BBL P1P.json" - }, - { - "name": "Generic TPU for AMS @BBL P2S", - "sub_path": "filament/Generic TPU for AMS @BBL P2S.json" - }, - { - "name": "Generic TPU for AMS @BBL X1C", - "sub_path": "filament/Generic TPU for AMS @BBL X1C.json" - }, - { - "name": "Generic TPU for AMS @BBL X2D", - "sub_path": "filament/Generic TPU for AMS @BBL X2D.json" - }, - { - "name": "Generic TPU for AMS @BBL X2D 0.4 nozzle", - "sub_path": "filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json" - }, - { - "name": "Generic ABS @BBL H2DP", - "sub_path": "filament/Generic ABS @BBL H2DP.json" - }, - { - "name": "Generic ABS @BBL X1E", - "sub_path": "filament/Generic ABS @BBL X1E.json" - }, - { - "name": "Generic ABS @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic ABS @BBL X1E 0.2 nozzle", - "sub_path": "filament/Generic ABS @BBL X1E 0.2 nozzle.json" - }, - { - "name": "PolyLite ABS @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL P1P 0.2 nozzle.json" - }, - { - "name": "PolyLite ABS @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ABS @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL H2DP", - "sub_path": "filament/Generic ASA @BBL H2DP.json" - }, - { - "name": "Generic ASA @BBL X1E", - "sub_path": "filament/Generic ASA @BBL X1E.json" - }, - { - "name": "Generic ASA @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic ASA @BBL X1E 0.2 nozzle", - "sub_path": "filament/Generic ASA @BBL X1E 0.2 nozzle.json" - }, - { - "name": "PolyLite ASA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "PolyLite ASA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "PolyLite ASA @BBL X1E 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite ASA @BBL X1E 0.2 nozzle.json" - }, - { - "name": "Generic PA @BBL A1", - "sub_path": "filament/Generic PA @BBL A1.json" - }, - { - "name": "Generic PA-CF @BBL A1", - "sub_path": "filament/Generic PA-CF @BBL A1.json" - }, - { - "name": "Generic PA-CF @BBL H2C", - "sub_path": "filament/Generic PA-CF @BBL H2C.json" - }, - { - "name": "Generic PA-CF @BBL H2C 0.4 nozzle", - "sub_path": "filament/Generic PA-CF @BBL H2C 0.4 nozzle.json" - }, - { - "name": "Generic PA-CF @BBL H2D", - "sub_path": "filament/Generic PA-CF @BBL H2D.json" - }, - { - "name": "Generic PA-CF @BBL H2DP", - "sub_path": "filament/Generic PA-CF @BBL H2DP.json" - }, - { - "name": "Generic PA-CF @BBL X1E", - "sub_path": "filament/Generic PA-CF @BBL X1E.json" - }, - { - "name": "Bambu PC @BBL P1S", - "sub_path": "filament/Bambu PC @BBL P1S.json" - }, - { - "name": "Bambu PC @BBL P1S 0.2 nozzle", - "sub_path": "filament/Bambu PC @BBL P1S 0.2 nozzle.json" - }, - { - "name": "Bambu PC @BBL P1S 0.6 nozzle", - "sub_path": "filament/Bambu PC @BBL P1S 0.6 nozzle.json" - }, - { - "name": "Bambu PC @BBL P1S 0.8 nozzle", - "sub_path": "filament/Bambu PC @BBL P1S 0.8 nozzle.json" - }, - { - "name": "Generic PC @BBL H2DP", - "sub_path": "filament/Generic PC @BBL H2DP.json" - }, - { - "name": "Generic PC @BBL P1S", - "sub_path": "filament/Generic PC @BBL P1S.json" - }, - { - "name": "Generic PC @BBL P2S", - "sub_path": "filament/Generic PC @BBL P2S.json" - }, - { - "name": "Generic PC @BBL X1E", - "sub_path": "filament/Generic PC @BBL X1E.json" - }, - { - "name": "Generic PC @BBL H2DP 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL H2DP 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL P1S 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL P1S 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL P2S 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL P2S 0.2 nozzle.json" - }, - { - "name": "Generic PC @BBL X1E 0.2 nozzle", - "sub_path": "filament/Generic PC @BBL X1E 0.2 nozzle.json" - }, - { - "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle", - "sub_path": "filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json" - }, - { - "name": "PolyLite PETG @BBL A1M 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL A1M 0.2 nozzle.json" - }, - { - "name": "PolyLite PETG @BBL P1P 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL P1P 0.2 nozzle.json" - }, - { - "name": "PolyLite PETG @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PETG @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL P1P 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL X1 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL X1 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL X1C 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL X2D 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Bambu PLA Glow @BBL X1E 0.2 nozzle", - "sub_path": "filament/Bambu PLA Glow @BBL X1E 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Generic PLA High Speed @BBL X2D 0.2 nozzle", - "sub_path": "filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture Matte PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture Matte PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture Matte PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture Matte PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "PolyLite PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyLite PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "PolyTerra PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "PolyTerra PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Polymaker/PolyTerra PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Bambu TPU 95A HF @BBL H2D 0.4 nozzle", - "sub_path": "filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json" - }, - { - "name": "Bambu TPU 95A HF @BBL H2DP 0.4 nozzle", - "sub_path": "filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json" - }, - { - "name": "Generic TPU @BBL A1", - "sub_path": "filament/Generic TPU @BBL A1.json" - }, - { - "name": "Generic TPU @BBL A1M", - "sub_path": "filament/Generic TPU @BBL A1M.json" - }, - { - "name": "Generic TPU @BBL A2L", - "sub_path": "filament/Generic TPU @BBL A2L.json" - }, - { - "name": "Generic TPU @BBL H2S", - "sub_path": "filament/Generic TPU @BBL H2S.json" - }, - { - "name": "AliZ PA-CF @P1-X1", - "sub_path": "filament/AliZ/AliZ PA-CF @P1-X1.json" - }, - { - "name": "AliZ PETG @P1-X1", - "sub_path": "filament/AliZ/AliZ PETG @P1-X1.json" - }, - { - "name": "AliZ PETG-CF @P1-X1", - "sub_path": "filament/AliZ/AliZ PETG-CF @P1-X1.json" - }, - { - "name": "AliZ PETG-Metal @P1-X1", - "sub_path": "filament/AliZ/AliZ PETG-Metal @P1-X1.json" - }, - { - "name": "AliZ PLA @P1-X1", - "sub_path": "filament/AliZ/AliZ PLA @P1-X1.json" - }, - { - "name": "COEX ABS @BBL X1", - "sub_path": "filament/COEX/COEX ABS @BBL X1.json" - }, - { - "name": "COEX ABS @BBL X1 0.2 nozzle", - "sub_path": "filament/COEX/COEX ABS @BBL X1 0.2 nozzle.json" - }, - { - "name": "COEX ABS @BBL X1C", - "sub_path": "filament/COEX/COEX ABS @BBL X1C.json" - }, - { - "name": "COEX ABS @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX ABS @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX ABS PRIME @BBL X1", - "sub_path": "filament/COEX/COEX ABS PRIME @BBL X1.json" - }, - { - "name": "COEX ABS PRIME @BBL X1 0.2 nozzle", - "sub_path": "filament/COEX/COEX ABS PRIME @BBL X1 0.2 nozzle.json" - }, - { - "name": "COEX ABS PRIME @BBL X1C", - "sub_path": "filament/COEX/COEX ABS PRIME @BBL X1C.json" - }, - { - "name": "COEX ABS PRIME @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX ABS PRIME @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX ASA PRIME @BBL X1", - "sub_path": "filament/COEX/COEX ASA PRIME @BBL X1.json" - }, - { - "name": "COEX ASA PRIME @BBL X1 0.2 nozzle", - "sub_path": "filament/COEX/COEX ASA PRIME @BBL X1 0.2 nozzle.json" - }, - { - "name": "COEX ASA PRIME @BBL X1C", - "sub_path": "filament/COEX/COEX ASA PRIME @BBL X1C.json" - }, - { - "name": "COEX ASA PRIME @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX ASA PRIME @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX NYLEX PA6-CF @BBL X1C", - "sub_path": "filament/COEX/COEX NYLEX PA6-CF @BBL X1C.json" - }, - { - "name": "COEX NYLEX UNFILLED @BBL X1C", - "sub_path": "filament/COEX/COEX NYLEX UNFILLED @BBL X1C.json" - }, - { - "name": "COEX PCTG PRIME @BBL A1", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL A1.json" - }, - { - "name": "COEX PCTG PRIME @BBL A1 0.2 nozzle", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL A1 0.2 nozzle.json" - }, - { - "name": "COEX PCTG PRIME @BBL A1 0.8 nozzle", - "sub_path": "filament/COEX/COEX PCTG PRIME @BBL A1 0.8 nozzle.json" - }, - { - "name": "COEX PETG @BBL A1", - "sub_path": "filament/COEX/COEX PETG @BBL A1.json" - }, - { - "name": "COEX PETG @BBL A1 0.2 nozzle", - "sub_path": "filament/COEX/COEX PETG @BBL A1 0.2 nozzle.json" - }, - { - "name": "COEX PETG @BBL A1 0.8 nozzle", - "sub_path": "filament/COEX/COEX PETG @BBL A1 0.8 nozzle.json" - }, - { - "name": "COEX PLA @BBL A1", - "sub_path": "filament/COEX/COEX PLA @BBL A1.json" - }, - { - "name": "COEX PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "COEX PLA @BBL X1", - "sub_path": "filament/COEX/COEX PLA @BBL X1.json" - }, - { - "name": "COEX PLA PRIME @BBL A1", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL A1.json" - }, - { - "name": "COEX PLA PRIME @BBL A1 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL A1 0.2 nozzle.json" - }, - { - "name": "COEX PLA PRIME @BBL A1M", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL A1M.json" - }, - { - "name": "COEX PLA PRIME @BBL A1M 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL A1M 0.2 nozzle.json" - }, - { - "name": "COEX PLA PRIME @BBL P1P", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL P1P.json" - }, - { - "name": "COEX PLA PRIME @BBL P1P 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL P1P 0.2 nozzle.json" - }, - { - "name": "COEX PLA PRIME @BBL X1", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL X1.json" - }, - { - "name": "COEX PLA PRIME @BBL X1 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL X1 0.2 nozzle.json" - }, - { - "name": "COEX PLA PRIME @BBL X1C", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL X1C.json" - }, - { - "name": "COEX PLA PRIME @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA PRIME @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX PLA+Silk @BBL A1", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL A1.json" - }, - { - "name": "COEX PLA+Silk @BBL A1 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL A1 0.2 nozzle.json" - }, - { - "name": "COEX PLA+Silk @BBL A1M", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL A1M.json" - }, - { - "name": "COEX PLA+Silk @BBL A1M 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL A1M 0.2 nozzle.json" - }, - { - "name": "COEX PLA+Silk @BBL P1P", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL P1P.json" - }, - { - "name": "COEX PLA+Silk @BBL P1P 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL P1P 0.2 nozzle.json" - }, - { - "name": "COEX PLA+Silk @BBL X1", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL X1.json" - }, - { - "name": "COEX PLA+Silk @BBL X1 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL X1 0.2 nozzle.json" - }, - { - "name": "COEX PLA+Silk @BBL X1C", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL X1C.json" - }, - { - "name": "COEX PLA+Silk @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX PLA+Silk @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX TPE 30D @BBL A1", - "sub_path": "filament/COEX/COEX TPE 30D @BBL A1.json" - }, - { - "name": "COEX TPE 30D @BBL A1M", - "sub_path": "filament/COEX/COEX TPE 30D @BBL A1M.json" - }, - { - "name": "COEX TPE 30D @BBL P1P", - "sub_path": "filament/COEX/COEX TPE 30D @BBL P1P.json" - }, - { - "name": "COEX TPE 30D @BBL X1", - "sub_path": "filament/COEX/COEX TPE 30D @BBL X1.json" - }, - { - "name": "COEX TPE 30D @BBL X1C", - "sub_path": "filament/COEX/COEX TPE 30D @BBL X1C.json" - }, - { - "name": "COEX TPE 40D @BBL A1", - "sub_path": "filament/COEX/COEX TPE 40D @BBL A1.json" - }, - { - "name": "COEX TPE 40D @BBL A1 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 40D @BBL A1 0.2 nozzle.json" - }, - { - "name": "COEX TPE 40D @BBL A1M", - "sub_path": "filament/COEX/COEX TPE 40D @BBL A1M.json" - }, - { - "name": "COEX TPE 40D @BBL A1M 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 40D @BBL A1M 0.2 nozzle.json" - }, - { - "name": "COEX TPE 40D @BBL P1P", - "sub_path": "filament/COEX/COEX TPE 40D @BBL P1P.json" - }, - { - "name": "COEX TPE 40D @BBL P1P 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 40D @BBL P1P 0.2 nozzle.json" - }, - { - "name": "COEX TPE 40D @BBL X1", - "sub_path": "filament/COEX/COEX TPE 40D @BBL X1.json" - }, - { - "name": "COEX TPE 40D @BBL X1 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 40D @BBL X1 0.2 nozzle.json" - }, - { - "name": "COEX TPE 40D @BBL X1C", - "sub_path": "filament/COEX/COEX TPE 40D @BBL X1C.json" - }, - { - "name": "COEX TPE 40D @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 40D @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX TPE 60D @BBL A1", - "sub_path": "filament/COEX/COEX TPE 60D @BBL A1.json" - }, - { - "name": "COEX TPE 60D @BBL A1 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 60D @BBL A1 0.2 nozzle.json" - }, - { - "name": "COEX TPE 60D @BBL A1M", - "sub_path": "filament/COEX/COEX TPE 60D @BBL A1M.json" - }, - { - "name": "COEX TPE 60D @BBL A1M 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 60D @BBL A1M 0.2 nozzle.json" - }, - { - "name": "COEX TPE 60D @BBL P1P", - "sub_path": "filament/COEX/COEX TPE 60D @BBL P1P.json" - }, - { - "name": "COEX TPE 60D @BBL P1P 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 60D @BBL P1P 0.2 nozzle.json" - }, - { - "name": "COEX TPE 60D @BBL X1", - "sub_path": "filament/COEX/COEX TPE 60D @BBL X1.json" - }, - { - "name": "COEX TPE 60D @BBL X1 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 60D @BBL X1 0.2 nozzle.json" - }, - { - "name": "COEX TPE 60D @BBL X1C", - "sub_path": "filament/COEX/COEX TPE 60D @BBL X1C.json" - }, - { - "name": "COEX TPE 60D @BBL X1C 0.2 nozzle", - "sub_path": "filament/COEX/COEX TPE 60D @BBL X1C 0.2 nozzle.json" - }, - { - "name": "COEX TPU 60A @BBL X1C", - "sub_path": "filament/COEX/COEX TPU 60A @BBL X1C.json" - }, - { - "name": "Overture ASA @BBL X1", - "sub_path": "filament/Overture/Overture ASA @BBL X1.json" - }, - { - "name": "Overture ASA @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture ASA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture ASA @BBL X1C", - "sub_path": "filament/Overture/Overture ASA @BBL X1C.json" - }, - { - "name": "Overture ASA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture ASA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture Air PLA @BBL A1", - "sub_path": "filament/Overture/Overture Air PLA @BBL A1.json" - }, - { - "name": "Overture Air PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Air PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture Air PLA @BBL A1M", - "sub_path": "filament/Overture/Overture Air PLA @BBL A1M.json" - }, - { - "name": "Overture Air PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture Air PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture Air PLA @BBL P1P", - "sub_path": "filament/Overture/Overture Air PLA @BBL P1P.json" - }, - { - "name": "Overture Air PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture Air PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture Air PLA @BBL X1", - "sub_path": "filament/Overture/Overture Air PLA @BBL X1.json" - }, - { - "name": "Overture Air PLA @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Air PLA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture Air PLA @BBL X1C", - "sub_path": "filament/Overture/Overture Air PLA @BBL X1C.json" - }, - { - "name": "Overture Air PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture Air PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture Easy PLA @BBL A1", - "sub_path": "filament/Overture/Overture Easy PLA @BBL A1.json" - }, - { - "name": "Overture Easy PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Easy PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture Easy PLA @BBL A1M", - "sub_path": "filament/Overture/Overture Easy PLA @BBL A1M.json" - }, - { - "name": "Overture Easy PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture Easy PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture Easy PLA @BBL P1P", - "sub_path": "filament/Overture/Overture Easy PLA @BBL P1P.json" - }, - { - "name": "Overture Easy PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture Easy PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture Easy PLA @BBL X1", - "sub_path": "filament/Overture/Overture Easy PLA @BBL X1.json" - }, - { - "name": "Overture Easy PLA @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Easy PLA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture Easy PLA @BBL X1C", - "sub_path": "filament/Overture/Overture Easy PLA @BBL X1C.json" - }, - { - "name": "Overture Easy PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture Easy PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture Rock PLA @BBL A1", - "sub_path": "filament/Overture/Overture Rock PLA @BBL A1.json" - }, - { - "name": "Overture Rock PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Rock PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture Rock PLA @BBL A1M", - "sub_path": "filament/Overture/Overture Rock PLA @BBL A1M.json" - }, - { - "name": "Overture Rock PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture Rock PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture Rock PLA @BBL P1P", - "sub_path": "filament/Overture/Overture Rock PLA @BBL P1P.json" - }, - { - "name": "Overture Rock PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture Rock PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture Rock PLA @BBL X1", - "sub_path": "filament/Overture/Overture Rock PLA @BBL X1.json" - }, - { - "name": "Overture Rock PLA @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Rock PLA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture Rock PLA @BBL X1C", - "sub_path": "filament/Overture/Overture Rock PLA @BBL X1C.json" - }, - { - "name": "Overture Rock PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture Rock PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture Silk PLA @BBL A1", - "sub_path": "filament/Overture/Overture Silk PLA @BBL A1.json" - }, - { - "name": "Overture Silk PLA @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Silk PLA @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture Silk PLA @BBL A1M", - "sub_path": "filament/Overture/Overture Silk PLA @BBL A1M.json" - }, - { - "name": "Overture Silk PLA @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture Silk PLA @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture Silk PLA @BBL P1P", - "sub_path": "filament/Overture/Overture Silk PLA @BBL P1P.json" - }, - { - "name": "Overture Silk PLA @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture Silk PLA @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture Silk PLA @BBL X1", - "sub_path": "filament/Overture/Overture Silk PLA @BBL X1.json" - }, - { - "name": "Overture Silk PLA @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Silk PLA @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture Silk PLA @BBL X1C", - "sub_path": "filament/Overture/Overture Silk PLA @BBL X1C.json" - }, - { - "name": "Overture Silk PLA @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture Silk PLA @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture Super PLA+ @BBL A1", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL A1.json" - }, - { - "name": "Overture Super PLA+ @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture Super PLA+ @BBL A1M", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL A1M.json" - }, - { - "name": "Overture Super PLA+ @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture Super PLA+ @BBL P1P", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL P1P.json" - }, - { - "name": "Overture Super PLA+ @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture Super PLA+ @BBL X1", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL X1.json" - }, - { - "name": "Overture Super PLA+ @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture Super PLA+ @BBL X1C", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL X1C.json" - }, - { - "name": "Overture Super PLA+ @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture Super PLA+ @BBL X1C 0.2 nozzle.json" - }, - { - "name": "Overture TPU @BBL A1", - "sub_path": "filament/Overture/Overture TPU @BBL A1.json" - }, - { - "name": "Overture TPU @BBL A1 0.2 nozzle", - "sub_path": "filament/Overture/Overture TPU @BBL A1 0.2 nozzle.json" - }, - { - "name": "Overture TPU @BBL A1M", - "sub_path": "filament/Overture/Overture TPU @BBL A1M.json" - }, - { - "name": "Overture TPU @BBL A1M 0.2 nozzle", - "sub_path": "filament/Overture/Overture TPU @BBL A1M 0.2 nozzle.json" - }, - { - "name": "Overture TPU @BBL P1P", - "sub_path": "filament/Overture/Overture TPU @BBL P1P.json" - }, - { - "name": "Overture TPU @BBL P1P 0.2 nozzle", - "sub_path": "filament/Overture/Overture TPU @BBL P1P 0.2 nozzle.json" - }, - { - "name": "Overture TPU @BBL X1", - "sub_path": "filament/Overture/Overture TPU @BBL X1.json" - }, - { - "name": "Overture TPU @BBL X1 0.2 nozzle", - "sub_path": "filament/Overture/Overture TPU @BBL X1 0.2 nozzle.json" - }, - { - "name": "Overture TPU @BBL X1C", - "sub_path": "filament/Overture/Overture TPU @BBL X1C.json" - }, - { - "name": "Overture TPU @BBL X1C 0.2 nozzle", - "sub_path": "filament/Overture/Overture TPU @BBL X1C 0.2 nozzle.json" - }, - { - "name": "fdm_filament_dual_common", - "sub_path": "filament/fdm_filament_dual_common.json" - } - ], - "machine_list": [ - { - "name": "fdm_machine_common", - "sub_path": "machine/fdm_machine_common.json" - }, - { - "name": "fdm_bbl_3dp_001_common", - "sub_path": "machine/fdm_bbl_3dp_001_common.json" - }, - { - "name": "fdm_bbl_3dp_002_common", - "sub_path": "machine/fdm_bbl_3dp_002_common.json" - }, - { - "name": "Bambu Lab A1 0.4 nozzle", - "sub_path": "machine/Bambu Lab A1 0.4 nozzle.json" - }, - { - "name": "Bambu Lab A1 mini 0.4 nozzle", - "sub_path": "machine/Bambu Lab A1 mini 0.4 nozzle.json" - }, - { - "name": "Bambu Lab A2L 0.4 nozzle", - "sub_path": "machine/Bambu Lab A2L 0.4 nozzle.json" - }, - { - "name": "Bambu Lab H2S 0.4 nozzle", - "sub_path": "machine/Bambu Lab H2S 0.4 nozzle.json" - }, - { - "name": "Bambu Lab P1P 0.4 nozzle", - "sub_path": "machine/Bambu Lab P1P 0.4 nozzle.json" - }, - { - "name": "Bambu Lab P1S 0.4 nozzle", - "sub_path": "machine/Bambu Lab P1S 0.4 nozzle.json" - }, - { - "name": "Bambu Lab P2S 0.4 nozzle", - "sub_path": "machine/Bambu Lab P2S 0.4 nozzle.json" - }, - { - "name": "Bambu Lab X1 0.4 nozzle", - "sub_path": "machine/Bambu Lab X1 0.4 nozzle.json" - }, - { - "name": "Bambu Lab X1 Carbon 0.4 nozzle", - "sub_path": "machine/Bambu Lab X1 Carbon 0.4 nozzle.json" - }, - { - "name": "Bambu Lab X1E 0.4 nozzle", - "sub_path": "machine/Bambu Lab X1E 0.4 nozzle.json" - }, - { - "name": "Bambu Lab H2C 0.4 nozzle", - "sub_path": "machine/Bambu Lab H2C 0.4 nozzle.json" - }, - { - "name": "Bambu Lab H2D 0.4 nozzle", - "sub_path": "machine/Bambu Lab H2D 0.4 nozzle.json" - }, - { - "name": "Bambu Lab H2D Pro 0.4 nozzle", - "sub_path": "machine/Bambu Lab H2D Pro 0.4 nozzle.json" - }, - { - "name": "Bambu Lab X2D 0.4 nozzle", - "sub_path": "machine/Bambu Lab X2D 0.4 nozzle.json" - }, - { - "name": "Bambu Lab A1 0.2 nozzle", - "sub_path": "machine/Bambu Lab A1 0.2 nozzle.json" - }, - { - "name": "Bambu Lab A1 0.6 nozzle", - "sub_path": "machine/Bambu Lab A1 0.6 nozzle.json" - }, - { - "name": "Bambu Lab A1 0.8 nozzle", - "sub_path": "machine/Bambu Lab A1 0.8 nozzle.json" - }, - { - "name": "Bambu Lab A1 mini 0.2 nozzle", - "sub_path": "machine/Bambu Lab A1 mini 0.2 nozzle.json" - }, - { - "name": "Bambu Lab A1 mini 0.6 nozzle", - "sub_path": "machine/Bambu Lab A1 mini 0.6 nozzle.json" - }, - { - "name": "Bambu Lab A1 mini 0.8 nozzle", - "sub_path": "machine/Bambu Lab A1 mini 0.8 nozzle.json" - }, - { - "name": "Bambu Lab A2L 0.2 nozzle", - "sub_path": "machine/Bambu Lab A2L 0.2 nozzle.json" - }, - { - "name": "Bambu Lab A2L 0.6 nozzle", - "sub_path": "machine/Bambu Lab A2L 0.6 nozzle.json" - }, - { - "name": "Bambu Lab A2L 0.8 nozzle", - "sub_path": "machine/Bambu Lab A2L 0.8 nozzle.json" - }, - { - "name": "Bambu Lab H2S 0.2 nozzle", - "sub_path": "machine/Bambu Lab H2S 0.2 nozzle.json" - }, - { - "name": "Bambu Lab H2S 0.6 nozzle", - "sub_path": "machine/Bambu Lab H2S 0.6 nozzle.json" - }, - { - "name": "Bambu Lab H2S 0.8 nozzle", - "sub_path": "machine/Bambu Lab H2S 0.8 nozzle.json" - }, - { - "name": "Bambu Lab P1P 0.2 nozzle", - "sub_path": "machine/Bambu Lab P1P 0.2 nozzle.json" - }, - { - "name": "Bambu Lab P1P 0.6 nozzle", - "sub_path": "machine/Bambu Lab P1P 0.6 nozzle.json" - }, - { - "name": "Bambu Lab P1P 0.8 nozzle", - "sub_path": "machine/Bambu Lab P1P 0.8 nozzle.json" - }, - { - "name": "Bambu Lab P1S 0.2 nozzle", - "sub_path": "machine/Bambu Lab P1S 0.2 nozzle.json" - }, - { - "name": "Bambu Lab P1S 0.6 nozzle", - "sub_path": "machine/Bambu Lab P1S 0.6 nozzle.json" - }, - { - "name": "Bambu Lab P1S 0.8 nozzle", - "sub_path": "machine/Bambu Lab P1S 0.8 nozzle.json" - }, - { - "name": "Bambu Lab P2S 0.2 nozzle", - "sub_path": "machine/Bambu Lab P2S 0.2 nozzle.json" - }, - { - "name": "Bambu Lab P2S 0.6 nozzle", - "sub_path": "machine/Bambu Lab P2S 0.6 nozzle.json" - }, - { - "name": "Bambu Lab P2S 0.8 nozzle", - "sub_path": "machine/Bambu Lab P2S 0.8 nozzle.json" - }, - { - "name": "Bambu Lab X1 0.2 nozzle", - "sub_path": "machine/Bambu Lab X1 0.2 nozzle.json" - }, - { - "name": "Bambu Lab X1 0.6 nozzle", - "sub_path": "machine/Bambu Lab X1 0.6 nozzle.json" - }, - { - "name": "Bambu Lab X1 0.8 nozzle", - "sub_path": "machine/Bambu Lab X1 0.8 nozzle.json" - }, - { - "name": "Bambu Lab X1 Carbon 0.2 nozzle", - "sub_path": "machine/Bambu Lab X1 Carbon 0.2 nozzle.json" - }, - { - "name": "Bambu Lab X1 Carbon 0.6 nozzle", - "sub_path": "machine/Bambu Lab X1 Carbon 0.6 nozzle.json" - }, - { - "name": "Bambu Lab X1 Carbon 0.8 nozzle", - "sub_path": "machine/Bambu Lab X1 Carbon 0.8 nozzle.json" - }, - { - "name": "Bambu Lab X1E 0.2 nozzle", - "sub_path": "machine/Bambu Lab X1E 0.2 nozzle.json" - }, - { - "name": "Bambu Lab X1E 0.6 nozzle", - "sub_path": "machine/Bambu Lab X1E 0.6 nozzle.json" - }, - { - "name": "Bambu Lab X1E 0.8 nozzle", - "sub_path": "machine/Bambu Lab X1E 0.8 nozzle.json" - }, - { - "name": "Bambu Lab H2C 0.2 nozzle", - "sub_path": "machine/Bambu Lab H2C 0.2 nozzle.json" - }, - { - "name": "Bambu Lab H2C 0.6 nozzle", - "sub_path": "machine/Bambu Lab H2C 0.6 nozzle.json" - }, - { - "name": "Bambu Lab H2C 0.8 nozzle", - "sub_path": "machine/Bambu Lab H2C 0.8 nozzle.json" - }, - { - "name": "Bambu Lab H2D 0.2 nozzle", - "sub_path": "machine/Bambu Lab H2D 0.2 nozzle.json" - }, - { - "name": "Bambu Lab H2D 0.6 nozzle", - "sub_path": "machine/Bambu Lab H2D 0.6 nozzle.json" - }, - { - "name": "Bambu Lab H2D 0.8 nozzle", - "sub_path": "machine/Bambu Lab H2D 0.8 nozzle.json" - }, - { - "name": "Bambu Lab H2D Pro 0.2 nozzle", - "sub_path": "machine/Bambu Lab H2D Pro 0.2 nozzle.json" - }, - { - "name": "Bambu Lab H2D Pro 0.6 nozzle", - "sub_path": "machine/Bambu Lab H2D Pro 0.6 nozzle.json" - }, - { - "name": "Bambu Lab H2D Pro 0.8 nozzle", - "sub_path": "machine/Bambu Lab H2D Pro 0.8 nozzle.json" - }, - { - "name": "Bambu Lab X2D 0.2 nozzle", - "sub_path": "machine/Bambu Lab X2D 0.2 nozzle.json" - }, - { - "name": "Bambu Lab X2D 0.6 nozzle", - "sub_path": "machine/Bambu Lab X2D 0.6 nozzle.json" - }, - { - "name": "Bambu Lab X2D 0.8 nozzle", - "sub_path": "machine/Bambu Lab X2D 0.8 nozzle.json" - } ] } diff --git a/resources/profiles/BBL/Bambu Lab H2D Pro_cover.png b/resources/profiles/BBL/Bambu Lab H2D Pro_cover.png index d45e231794..3eb7b4cc07 100644 Binary files a/resources/profiles/BBL/Bambu Lab H2D Pro_cover.png and b/resources/profiles/BBL/Bambu Lab H2D Pro_cover.png differ diff --git a/resources/profiles/BBL/Bambu Lab H2S_cover.png b/resources/profiles/BBL/Bambu Lab H2S_cover.png index 70a048d50a..d2c5718d95 100644 Binary files a/resources/profiles/BBL/Bambu Lab H2S_cover.png and b/resources/profiles/BBL/Bambu Lab H2S_cover.png differ diff --git a/resources/profiles/BBL/Bambu Lab P2S_cover.png b/resources/profiles/BBL/Bambu Lab P2S_cover.png index 30982b863a..febba125ee 100644 Binary files a/resources/profiles/BBL/Bambu Lab P2S_cover.png and b/resources/profiles/BBL/Bambu Lab P2S_cover.png differ diff --git a/resources/profiles/BBL/Bambu Lab X2D_cover.png b/resources/profiles/BBL/Bambu Lab X2D_cover.png index fa4b9cf8fe..7478f9007f 100644 Binary files a/resources/profiles/BBL/Bambu Lab X2D_cover.png and b/resources/profiles/BBL/Bambu Lab X2D_cover.png differ diff --git a/resources/profiles/BBL/bbl-3dp-A1M.stl b/resources/profiles/BBL/bbl-3dp-A1M.stl index d31997c36a..ccdc7982e0 100644 Binary files a/resources/profiles/BBL/bbl-3dp-A1M.stl and b/resources/profiles/BBL/bbl-3dp-A1M.stl differ diff --git a/resources/profiles/BBL/bbl-3dp-H2C.stl b/resources/profiles/BBL/bbl-3dp-H2C.stl index 4588514dd5..0936bd1d33 100644 Binary files a/resources/profiles/BBL/bbl-3dp-H2C.stl and b/resources/profiles/BBL/bbl-3dp-H2C.stl differ diff --git a/resources/profiles/BBL/bbl-3dp-H2D.stl b/resources/profiles/BBL/bbl-3dp-H2D.stl index cf4a3db0f0..5c81ba64bb 100644 Binary files a/resources/profiles/BBL/bbl-3dp-H2D.stl and b/resources/profiles/BBL/bbl-3dp-H2D.stl differ diff --git a/resources/profiles/BBL/bbl-3dp-O1S.stl b/resources/profiles/BBL/bbl-3dp-O1S.stl index 151303d573..d69a50bcd6 100644 Binary files a/resources/profiles/BBL/bbl-3dp-O1S.stl and b/resources/profiles/BBL/bbl-3dp-O1S.stl differ diff --git a/resources/profiles/BBL/bbl-3dp-X1.stl b/resources/profiles/BBL/bbl-3dp-X1.stl index 08675caed6..6823cdb229 100644 Binary files a/resources/profiles/BBL/bbl-3dp-X1.stl and b/resources/profiles/BBL/bbl-3dp-X1.stl differ diff --git a/resources/profiles/BBL/bbl-3dp-hotend.stl b/resources/profiles/BBL/bbl-3dp-hotend.stl index 6b2aba77fa..4138160ec0 100644 Binary files a/resources/profiles/BBL/bbl-3dp-hotend.stl and b/resources/profiles/BBL/bbl-3dp-hotend.stl differ diff --git a/resources/profiles/BBL/cli_config.json b/resources/profiles/BBL/cli_config.json index 5aa010c355..4aea0a0404 100644 --- a/resources/profiles/BBL/cli_config.json +++ b/resources/profiles/BBL/cli_config.json @@ -1,767 +1,851 @@ { - "printer": { - "Bambu Lab A1": { - "machine_limits": { - "cli_safe_acceleration_e": "0,0", - "cli_safe_acceleration_extruding": "0,0", - "cli_safe_acceleration_retracting": "0,0", - "cli_safe_acceleration_travel": "6000,6000", - "cli_safe_acceleration_x": "6000,6000", - "cli_safe_acceleration_y": "6000,6000", - "cli_safe_acceleration_z": "0,0", - "cli_safe_jerk_e": "0,0", - "cli_safe_jerk_x": "0,0", - "cli_safe_jerk_y": "0,0", - "cli_safe_jerk_z": "0,0", - "cli_safe_speed_e": "0,0", - "cli_safe_speed_x": "0,0", - "cli_safe_speed_y": "0,0", - "cli_safe_speed_z": "0,0" - }, - "downward_check": { - "Bambu Lab A1 0.2 nozzle": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab A1 0.4 nozzle": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab A1 0.6 nozzle": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab A1 0.8 nozzle": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab A1 mini": { - "machine_limits": { - "cli_safe_acceleration_e": "0,0", - "cli_safe_acceleration_extruding": "0,0", - "cli_safe_acceleration_retracting": "0,0", - "cli_safe_acceleration_travel": "6000,6000", - "cli_safe_acceleration_x": "6000,6000", - "cli_safe_acceleration_y": "6000,6000", - "cli_safe_acceleration_z": "0,0", - "cli_safe_jerk_e": "0,0", - "cli_safe_jerk_x": "0,0", - "cli_safe_jerk_y": "0,0", - "cli_safe_jerk_z": "0,0", - "cli_safe_speed_e": "0,0", - "cli_safe_speed_x": "0,0", - "cli_safe_speed_y": "0,0", - "cli_safe_speed_z": "0,0" - }, - "downward_check": { - "Bambu Lab A1 mini 0.2 nozzle": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab A1 mini 0.4 nozzle": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab A1 mini 0.6 nozzle": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab A1 mini 0.8 nozzle": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab X1": { - "downward_check": { - "Bambu Lab X1 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab X1 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab X1 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab X1 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab X1 Carbon": { - "downward_check": { - "Bambu Lab X1 Carbon 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab X1 Carbon 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab X1 Carbon 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab X1 Carbon 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab X1E": { - "downward_check": { - "Bambu Lab X1E 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab X1E 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab X1E 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab X1E 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab P1P": { - "downward_check": { - "Bambu Lab P1P 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab P1P 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab P1P 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab P1P 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab P1S": { - "downward_check": { - "Bambu Lab P1S 0.2 nozzle": [ - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab P1S 0.4 nozzle": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab P1S 0.6 nozzle": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab P1S 0.8 nozzle": [ - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab H2D": { - "downward_check": { - "Bambu Lab H2D 0.2 nozzle": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab H2D 0.4 nozzle": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab H2D 0.6 nozzle": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab H2D 0.8 nozzle": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab H2D Pro": { - "downward_check": { - "Bambu Lab H2D Pro 0.2 nozzle": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab H2D Pro 0.4 nozzle": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab H2D Pro 0.6 nozzle": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab H2D Pro 0.8 nozzle": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab H2S": { - "downward_check": { - "Bambu Lab H2S 0.2 nozzle": [ - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab H2S 0.4 nozzle": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab H2S 0.6 nozzle": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab H2S 0.8 nozzle": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab P2S": { - "downward_check": { - "Bambu Lab P2S 0.2 nozzle": [ - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab P2S 0.4 nozzle": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab P2S 0.6 nozzle": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab P2S 0.8 nozzle": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - }, - "Bambu Lab X2D": { - "downward_check": { - "Bambu Lab X2D 0.2 nozzle": [ - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab H2C 0.2 nozzle" - ], - "Bambu Lab X2D 0.4 nozzle": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab H2C 0.4 nozzle" - ], - "Bambu Lab X2D 0.6 nozzle": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab H2C 0.6 nozzle" - ], - "Bambu Lab X2D 0.8 nozzle": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ] - } - }, - "Bambu Lab H2C": { - "downward_check": { - "Bambu Lab H2C 0.2 nozzle": [ - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle", - "Bambu Lab A2L 0.2 nozzle" - ], - "Bambu Lab H2C 0.4 nozzle": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle", - "Bambu Lab A2L 0.4 nozzle" - ], - "Bambu Lab H2C 0.6 nozzle": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab A2L 0.6 nozzle" - ], - "Bambu Lab H2C 0.8 nozzle": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ] - } - }, - "Bambu Lab A2L": { - "machine_limits": { - "cli_safe_acceleration_e": "0,0", - "cli_safe_acceleration_extruding": "0,0", - "cli_safe_acceleration_retracting": "0,0", - "cli_safe_acceleration_travel": "8000,8000", - "cli_safe_acceleration_x": "6000,6000", - "cli_safe_acceleration_y": "6000,6000", - "cli_safe_acceleration_z": "0,0", - "cli_safe_jerk_e": "0,0", - "cli_safe_jerk_x": "0,0", - "cli_safe_jerk_y": "0,0", - "cli_safe_jerk_z": "0,0", - "cli_safe_speed_e": "0,0", - "cli_safe_speed_x": "0,0", - "cli_safe_speed_y": "0,0", - "cli_safe_speed_z": "0,0" - }, - "downward_check": { - "Bambu Lab A2L 0.2 nozzle": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab A1 mini 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab H2C 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab X2D 0.2 nozzle" - ], - "Bambu Lab A2L 0.4 nozzle": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2C 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab X2D 0.4 nozzle" - ], - "Bambu Lab A2L 0.6 nozzle": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab X2D 0.6 nozzle" - ], - "Bambu Lab A2L 0.8 nozzle": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab H2C 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ] - } - } - } + "printer": { + "Bambu Lab A1": { + "machine_limits": { + "cli_safe_acceleration_e": "0,0", + "cli_safe_acceleration_extruding": "0,0", + "cli_safe_acceleration_retracting": "0,0", + "cli_safe_acceleration_travel": "6000,6000", + "cli_safe_acceleration_x": "6000,6000", + "cli_safe_acceleration_y": "6000,6000", + "cli_safe_acceleration_z": "0,0", + "cli_safe_jerk_e": "0,0", + "cli_safe_jerk_x": "0,0", + "cli_safe_jerk_y": "0,0", + "cli_safe_jerk_z": "0,0", + "cli_safe_speed_e": "0,0", + "cli_safe_speed_x": "0,0", + "cli_safe_speed_y": "0,0", + "cli_safe_speed_z": "0,0" + }, + "downward_check": { + "Bambu Lab A1 0.2 nozzle": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle" + ], + "Bambu Lab A1 0.4 nozzle": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle" + ], + "Bambu Lab A1 0.6 nozzle": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle" + ], + "Bambu Lab A1 0.8 nozzle": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ] + } + }, + "Bambu Lab A1 mini": { + "machine_limits": { + "cli_safe_acceleration_e": "0,0", + "cli_safe_acceleration_extruding": "0,0", + "cli_safe_acceleration_retracting": "0,0", + "cli_safe_acceleration_travel": "6000,6000", + "cli_safe_acceleration_x": "6000,6000", + "cli_safe_acceleration_y": "6000,6000", + "cli_safe_acceleration_z": "0,0", + "cli_safe_jerk_e": "0,0", + "cli_safe_jerk_x": "0,0", + "cli_safe_jerk_y": "0,0", + "cli_safe_jerk_z": "0,0", + "cli_safe_speed_e": "0,0", + "cli_safe_speed_x": "0,0", + "cli_safe_speed_y": "0,0", + "cli_safe_speed_z": "0,0" + }, + "downward_check": { + "Bambu Lab A1 mini 0.2 nozzle": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle" + ], + "Bambu Lab A1 mini 0.4 nozzle": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle" + ], + "Bambu Lab A1 mini 0.6 nozzle": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle" + ], + "Bambu Lab A1 mini 0.8 nozzle": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ] + } + }, + "Bambu Lab X1": { + "downward_check": { + "Bambu Lab X1 0.2 nozzle": [ + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab X1 0.4 nozzle": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab X1 0.6 nozzle": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab X1 0.8 nozzle": [ + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab X1 Carbon": { + "downward_check": { + "Bambu Lab X1 Carbon 0.2 nozzle": [ + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab X1 Carbon 0.4 nozzle": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab X1 Carbon 0.6 nozzle": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab X1 Carbon 0.8 nozzle": [ + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab X1E": { + "downward_check": { + "Bambu Lab X1E 0.2 nozzle": [ + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab X1E 0.4 nozzle": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab X1E 0.6 nozzle": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab X1E 0.8 nozzle": [ + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab P1P": { + "downward_check": { + "Bambu Lab P1P 0.2 nozzle": [ + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab P1P 0.4 nozzle": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab P1P 0.6 nozzle": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab P1P 0.8 nozzle": [ + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab P1S": { + "downward_check": { + "Bambu Lab P1S 0.2 nozzle": [ + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab P1S 0.4 nozzle": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab P1S 0.6 nozzle": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab P1S 0.8 nozzle": [ + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab H2D": { + "downward_check": { + "Bambu Lab H2D 0.2 nozzle": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab H2D 0.4 nozzle": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab H2D 0.6 nozzle": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab H2D 0.8 nozzle": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab H2D Pro": { + "downward_check": { + "Bambu Lab H2D Pro 0.2 nozzle": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab H2D Pro 0.4 nozzle": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab H2D Pro 0.6 nozzle": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab H2D Pro 0.8 nozzle": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab H2S": { + "downward_check": { + "Bambu Lab H2S 0.2 nozzle": [ + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab H2S 0.4 nozzle": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab H2S 0.6 nozzle": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab H2S 0.8 nozzle": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab P2S": { + "downward_check": { + "Bambu Lab P2S 0.2 nozzle": [ + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab P2S 0.4 nozzle": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab P2S 0.6 nozzle": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab P2S 0.8 nozzle": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab H2C": { + "downward_check": { + "Bambu Lab H2C 0.2 nozzle": [ + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab H2C 0.4 nozzle": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab H2C 0.6 nozzle": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab H2C 0.8 nozzle": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab X2D": { + "downward_check": { + "Bambu Lab X2D 0.2 nozzle": [ + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "Bambu Lab X2D 0.4 nozzle": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "Bambu Lab X2D 0.6 nozzle": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ], + "Bambu Lab X2D 0.8 nozzle": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] + } + }, + "Bambu Lab A2L": { + "machine_limits": { + "cli_safe_acceleration_e": "0,0", + "cli_safe_acceleration_extruding": "0,0", + "cli_safe_acceleration_retracting": "0,0", + "cli_safe_acceleration_travel": "8000,8000", + "cli_safe_acceleration_x": "6000,6000", + "cli_safe_acceleration_y": "6000,6000", + "cli_safe_acceleration_z": "0,0", + "cli_safe_jerk_e": "0,0", + "cli_safe_jerk_x": "0,0", + "cli_safe_jerk_y": "0,0", + "cli_safe_jerk_z": "0,0", + "cli_safe_speed_e": "0,0", + "cli_safe_speed_x": "0,0", + "cli_safe_speed_y": "0,0", + "cli_safe_speed_z": "0,0" + }, + "downward_check": { + "Bambu Lab A2L 0.2 nozzle": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab A1 mini 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle" + ], + "Bambu Lab A2L 0.4 nozzle": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle" + ], + "Bambu Lab A2L 0.6 nozzle": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle" + ], + "Bambu Lab A2L 0.8 nozzle": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ] + } + } + } } diff --git a/resources/profiles/BBL/filament/BETA/BETA ABS @base.json b/resources/profiles/BBL/filament/BETA/BETA ABS @base.json deleted file mode 100644 index bbed068703..0000000000 --- a/resources/profiles/BBL/filament/BETA/BETA ABS @base.json +++ /dev/null @@ -1,21 +0,0 @@ -{ - "type": "filament", - "name": "BETA ABS @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFjUXn67", - "instantiation": "false", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "filament_cost": [ - "24.99" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_vendor": [ - "BETA" - ], - "impact_strength_z": [ - "7.4" - ] -} diff --git a/resources/profiles/BBL/filament/BETA/BETA HIPS @base.json b/resources/profiles/BBL/filament/BETA/BETA HIPS @base.json deleted file mode 100644 index 4d244f9fe1..0000000000 --- a/resources/profiles/BBL/filament/BETA/BETA HIPS @base.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "type": "filament", - "name": "BETA HIPS @base", - "inherits": "fdm_filament_hips", - "from": "system", - "filament_id": "OFlmxlDG", - "instantiation": "false", - "filament_is_support": [ - "1" - ], - "filament_vendor": [ - "BETA" - ] -} diff --git a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @base.json b/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @base.json deleted file mode 100644 index 1c140e3720..0000000000 --- a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @base.json +++ /dev/null @@ -1,48 +0,0 @@ -{ - "type": "filament", - "name": "BETA PAHT-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OF6qw3Wb", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "94.99" - ], - "filament_density": [ - "1.06" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "BETA" - ], - "full_fan_speed_layer": [ - "2" - ], - "impact_strength_z": [ - "13.3" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "temperature_vitrification": [ - "180" - ] -} diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @base.json b/resources/profiles/BBL/filament/BETA/BETA TPU 90A @base.json deleted file mode 100644 index bba256fd74..0000000000 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @base.json +++ /dev/null @@ -1,33 +0,0 @@ -{ - "type": "filament", - "name": "BETA TPU 90A @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OF6Yn69v", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "59.99" - ], - "filament_max_volumetric_speed": [ - "2.8" - ], - "filament_vendor": [ - "BETA" - ], - "impact_strength_z": [ - "87.3" - ], - "nozzle_temperature": [ - "225" - ], - "nozzle_temperature_initial_layer": [ - "225" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "slow_down_layer_time": [ - "14" - ] -} diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @base.json b/resources/profiles/BBL/filament/BETA/BETA TPU 95A @base.json deleted file mode 100644 index 87f7757c3f..0000000000 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @base.json +++ /dev/null @@ -1,27 +0,0 @@ -{ - "type": "filament", - "name": "BETA TPU 95A @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFK7830e", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_vendor": [ - "BETA" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ] -} diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @base.json b/resources/profiles/BBL/filament/BETA/BETA TPU 98A @base.json deleted file mode 100644 index cd106a6bf6..0000000000 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @base.json +++ /dev/null @@ -1,27 +0,0 @@ -{ - "type": "filament", - "name": "BETA TPU 98A @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFzaq7Yg", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_vendor": [ - "BETA" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ] -} diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json index 436551f825..3282b698e7 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu ABS @BBL A1 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_08", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL A1 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_08", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json index 50a6b5b49b..434551b4ab 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL A1.json @@ -1,43 +1,46 @@ { - "type": "filament", - "name": "Bambu ABS @BBL A1", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_07", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL A1", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_07", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json index 476af5f5f2..fd561c9b02 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.2 nozzle.json @@ -1,210 +1,113 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2C 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_23", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "40" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2C 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_23", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json index d045691a69..43827c7a5e 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.6 nozzle.json @@ -1,204 +1,141 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2C 0.6 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_34", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_max_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "25", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ABS @BBL H2C 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_34", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "30", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json index e06502611f..7fd3b25a7e 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C 0.8 nozzle.json @@ -1,204 +1,127 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2C 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_35", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_max_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "25", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2C 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_35", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json index dde059f080..410db132d7 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2C.json @@ -1,204 +1,141 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2C", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_22", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_max_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.6" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ABS @BBL H2C", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_22", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_retraction_length": [ + "0.4", + "0.6", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json index d88b92f803..e357dc5e05 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.2 nozzle.json @@ -1,134 +1,83 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2D 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_12", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2D 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_12", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json index 9775ec7727..328543f9c0 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.6 nozzle.json @@ -1,138 +1,109 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2D 0.6 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_29", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_id": [ - "1", - "1" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2D 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_29", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35", + "25" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json index c2e36ce885..5d75f70a48 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D 0.8 nozzle.json @@ -1,134 +1,99 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2D 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_13", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2D 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_13", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json index 5f76cd7b7b..dcbe4c9c9b 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2D.json @@ -1,134 +1,109 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2D", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_11", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2D", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_11", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "35", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json index 49577af9aa..afb7d2af99 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,53 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2DP 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_17", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2DP 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_17", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json index eb037b997a..5ed4484f7f 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.6 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2DP 0.6 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_31", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ABS @BBL H2DP 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_31", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json index 2d62fb219b..5f5a3435d7 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP 0.8 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2DP 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_18", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2DP 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_18", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json index c8b70f19cc..ed170c8a30 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2DP.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2DP", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_16", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ABS @BBL H2DP", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_16", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json index e7756331db..6f18702239 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.2 nozzle.json @@ -1,143 +1,104 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2S 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_25", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2S 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_25", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json index c7611051e5..d995f5cf2f 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.6 nozzle.json @@ -1,140 +1,125 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2S 0.6 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_33", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ABS @BBL H2S 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_33", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35", + "25" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json index 0c5ee84975..af38270fbb 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S 0.8 nozzle.json @@ -1,140 +1,113 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2S 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_32", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL H2S 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_32", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json index 821c81cb29..35a8d05943 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL H2S.json @@ -1,140 +1,125 @@ { - "type": "filament", - "name": "Bambu ABS @BBL H2S", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_24", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ABS @BBL H2S", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_24", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "35", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..d2b3ac673b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.4 nozzle.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL P1S 0.4 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_38", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "16", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.6 nozzle.json new file mode 100644 index 0000000000..df087aa06b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL P1S 0.6 nozzle.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL P1S 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_39", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "16", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json index 4ea2a820a8..c82f324007 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.2 nozzle.json @@ -1,174 +1,94 @@ { - "type": "filament", - "name": "Bambu ABS @BBL P2S 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_14", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "65" - ], - "fan_min_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL P2S 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_14", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0" + ], + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_min_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json index 7a68865cc7..6627fb2e62 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.6 nozzle.json @@ -1,174 +1,105 @@ { - "type": "filament", - "name": "Bambu ABS @BBL P2S 0.6 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_36", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ABS @BBL P2S 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_36", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "35", + "16" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json index 1d362722c4..de71006ade 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S 0.8 nozzle.json @@ -1,177 +1,94 @@ { - "type": "filament", - "name": "Bambu ABS @BBL P2S 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_15", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL P2S 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_15", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0" + ], + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json index df806f0816..31fa4e25a1 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL P2S.json @@ -1,174 +1,110 @@ { - "type": "filament", - "name": "Bambu ABS @BBL P2S", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_10", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "65" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "25" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ABS @BBL P2S", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_10", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_min": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "25", + "16" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "hole_limit_max": [ + "0.1319" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json index f932ecd24e..ef901b0dc1 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.2 nozzle.json @@ -1,127 +1,58 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X1C 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_00", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X1C 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_00", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..b7d3a06ea2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.6 nozzle.json @@ -0,0 +1,64 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL X1C 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_40", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "16", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "0.4", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json index a48f1f1dad..c25c690d8b 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C 0.8 nozzle.json @@ -1,130 +1,58 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X1C 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_01", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X1C 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_01", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json index 3a34dff1b3..4632ca054f 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1C.json @@ -1,130 +1,74 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X1C", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X1C", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "16", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json index 21fd5d6c6f..63b7b1ea67 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.2 nozzle.json @@ -1,125 +1,56 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X1E 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_05", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X1E 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_05", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json index bd5a55a77c..5022a70244 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E 0.8 nozzle.json @@ -1,128 +1,56 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X1E 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_06", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X1E 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_06", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json index c70dc81a06..996212ace3 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X1E.json @@ -1,126 +1,61 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X1E", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_04", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X1E", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_04", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json index d8cc33038d..31edcc6add 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.2 nozzle.json @@ -1,299 +1,134 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X2D 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_min_speed": [ - "80" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "2", - "2" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X2D 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_20", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json index 127196b764..e647fa477c 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.4 nozzle.json @@ -1,299 +1,163 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X2D 0.4 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_max_speed": [ - "60" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "25", - "16", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ABS @BBL X2D 0.4 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_09", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "25", + "16", + "16", + "18", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json index d62909130b..ab10c78829 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D 0.8 nozzle.json @@ -1,299 +1,134 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X2D 0.8 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_30", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_max_speed": [ - "60" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "35", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL X2D 0.8 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_30", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "35", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json index 5c8d0db73f..6a0850497b 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu ABS @BBL X2D.json @@ -1,299 +1,160 @@ { - "type": "filament", - "name": "Bambu ABS @BBL X2D", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_19", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0124" - ], - "counter_coef_3": [ - "0.0241" - ], - "counter_limit_max": [ - "0.3341" - ], - "counter_limit_min": [ - "0.0241" - ], - "fan_max_speed": [ - "60" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "35", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "-0.0008" - ], - "hole_coef_3": [ - "0.1319" - ], - "hole_limit_max": [ - "0.1319" - ], - "hole_limit_min": [ - "0.1119" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ABS @BBL X2D", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_19", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0124" + ], + "counter_coef_3": [ + "0.0241" + ], + "counter_limit_max": [ + "0.3341" + ], + "counter_limit_min": [ + "0.0241" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "35", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0008" + ], + "hole_coef_3": [ + "0.1319" + ], + "hole_limit_max": [ + "0.1319" + ], + "hole_limit_min": [ + "0.1119" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ABS @base.json b/resources/profiles/BBL/filament/Bambu ABS @base.json index 5f395440eb..9762539779 100644 --- a/resources/profiles/BBL/filament/Bambu ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS @base.json @@ -1,21 +1,21 @@ { - "type": "filament", - "name": "Bambu ABS @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFhuaUQB", - "instantiation": "false", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "filament_cost": [ - "24.99" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "7.4" - ] -} + "type": "filament", + "name": "Bambu ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFhuaUQB", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_cost": [ + "15.99" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "7.4" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json index ce54312a12..aee4e52a01 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL A1", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_02", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL A1", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_02", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json index 101af4fbd3..2a22b2c56c 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C 0.4 nozzle.json @@ -1,174 +1,86 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL H2C 0.4 nozzle", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL H2C 0.4 nozzle", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json index b4aa3eabe8..debf0cdb10 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2C.json @@ -1,175 +1,87 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL H2C", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL H2C", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json index aede062e59..1e29218693 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2D.json @@ -1,130 +1,61 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL H2D", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL H2D", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json index 4687bbc34e..fbb310bb0c 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2DP.json @@ -1,130 +1,49 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL H2DP", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_05", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL H2DP", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json index b55d5009ad..e97591813c 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL H2S.json @@ -1,130 +1,71 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL H2S", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL H2S", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json index 92a613d31e..391dde6b68 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P1P.json @@ -1,121 +1,52 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL P1P", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL P1P", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_01", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json index 83c7e86a21..6e921bdcc0 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL P2S.json @@ -1,170 +1,72 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL P2S", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_04", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL P2S", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_04", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json index 84fa26686c..9da7b387f0 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X1C.json @@ -1,130 +1,61 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL X1C", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL X1C", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json index 83718ceffb..4eb2b0ed73 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D 0.4 nozzle.json @@ -1,266 +1,103 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL X2D 0.4 nozzle", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "1", - "1", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL X2D 0.4 nozzle", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "1", + "1", + "1", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json index dc684ed111..0feee7871a 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @BBL X2D.json @@ -1,267 +1,104 @@ { - "type": "filament", - "name": "Bambu ABS-GF @BBL X2D", - "inherits": "Bambu ABS-GF @base", - "from": "system", - "setting_id": "GFSB50_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "1", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @BBL X2D", + "inherits": "Bambu ABS-GF @base", + "from": "system", + "setting_id": "GFSB50_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "1", + "nil", + "1", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json index a14581034d..92aaa864c3 100644 --- a/resources/profiles/BBL/filament/Bambu ABS-GF @base.json +++ b/resources/profiles/BBL/filament/Bambu ABS-GF @base.json @@ -1,45 +1,45 @@ { - "type": "filament", - "name": "Bambu ABS-GF @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFknl9Iz", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_cooling_layer_time": [ - "12" - ], - "fan_max_speed": [ - "30" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.08" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "ABS-GF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "5.3" - ], - "overhang_fan_speed": [ - "30" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "4" - ] -} + "type": "filament", + "name": "Bambu ABS-GF @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFknl9Iz", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "12" + ], + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "26.99" + ], + "filament_density": [ + "1.08" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "ABS-GF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "5.3" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "4" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json index e8bf20f799..52d1c45a6b 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.2 nozzle.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Bambu ASA @BBL A1 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_10", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL A1 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_10", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json index 47ee685e30..97017c4fa3 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.4 nozzle.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Bambu ASA @BBL A1 0.4 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL A1 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json index 61b62b138d..8aa9d6f38b 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL A1 0.6 nozzle.json @@ -1,21 +1,21 @@ { - "type": "filament", - "name": "Bambu ASA @BBL A1 0.6 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_08", - "instantiation": "true", - "fan_min_speed": [ - "25" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL A1 0.6 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_08", + "instantiation": "true", + "fan_min_speed": [ + "25" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json index 0265544a71..d219538b6d 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.2 nozzle.json @@ -1,201 +1,104 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2C 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_24", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0094" - ], - "counter_coef_3": [ - "-0.0092" - ], - "counter_limit_max": [ - "0.2258" - ], - "counter_limit_min": [ - "-0.0092" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0013" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1586" - ], - "hole_limit_min": [ - "0.1261" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "85" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2C 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_24", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "85" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json index 6dd2e76bce..4607a76875 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.6 nozzle.json @@ -1,198 +1,135 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2C 0.6 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_37", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0094" - ], - "counter_coef_3": [ - "-0.0092" - ], - "counter_limit_max": [ - "0.2258" - ], - "counter_limit_min": [ - "-0.0092" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "25", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0013" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1586" - ], - "hole_limit_min": [ - "0.1261" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "85" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ASA @BBL H2C 0.6 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_37", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "25", + "30", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "85" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json index f0597a6b6b..9e423a7cd8 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C 0.8 nozzle.json @@ -1,198 +1,121 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2C 0.8 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_38", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0094" - ], - "counter_coef_3": [ - "-0.0092" - ], - "counter_limit_max": [ - "0.2258" - ], - "counter_limit_min": [ - "-0.0092" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "25", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0013" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1586" - ], - "hole_limit_min": [ - "0.1261" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "85" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2C 0.8 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_38", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "25", + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "85" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json index c9a9653a42..dd929d197a 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2C.json @@ -1,198 +1,135 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2C", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_23", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0094" - ], - "counter_coef_3": [ - "-0.0092" - ], - "counter_limit_max": [ - "0.2258" - ], - "counter_limit_min": [ - "-0.0092" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.6" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0013" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1586" - ], - "hole_limit_min": [ - "0.1261" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "85" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ASA @BBL H2C", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_23", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_retraction_length": [ + "0.4", + "0.6", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "85" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json index 1f1678b52b..97240d7f90 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.2 nozzle.json @@ -1,128 +1,77 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2D 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_12", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2D 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_12", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json index a081558c0a..156abeec8c 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.4 nozzle.json @@ -1,149 +1,103 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2D 0.4 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_13", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.007" - ], - "counter_coef_3": [ - "0.003" - ], - "counter_limit_max": [ - "0.1" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.006" - ], - "hole_coef_3": [ - "0.25" - ], - "hole_limit_min": [ - "-0.088" - ], - "hole_limit_max": [ - "0.14" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2D 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_13", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "35", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json index fdb51cedba..73850c5f55 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.6 nozzle.json @@ -1,128 +1,103 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2D 0.6 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_11", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2D 0.6 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_11", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35", + "25" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json index 6c16c18dc7..b10ab76104 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2D 0.8 nozzle.json @@ -1,132 +1,97 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2D 0.8 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_33", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_id": [ - "1", - "1" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2D 0.8 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_33", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_extruder_id": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json index e728c14b86..1225a33407 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.2 nozzle.json @@ -1,128 +1,47 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2DP 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_18", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2DP 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_18", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json index 2d7a3e0b78..9e778800b9 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.4 nozzle.json @@ -1,149 +1,84 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2DP 0.4 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_19", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.007" - ], - "counter_coef_3": [ - "0.003" - ], - "counter_limit_max": [ - "0.1" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.006" - ], - "hole_coef_3": [ - "0.25" - ], - "hole_limit_min": [ - "-0.088" - ], - "hole_limit_max": [ - "0.14" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ASA @BBL H2DP 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_19", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.007" + ], + "counter_coef_3": [ + "0.003" + ], + "counter_limit_max": [ + "0.1" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.006" + ], + "hole_coef_3": [ + "0.25" + ], + "hole_limit_max": [ + "0.14" + ], + "hole_limit_min": [ + "-0.088" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json index 6ff818396f..37552482a1 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.6 nozzle.json @@ -1,128 +1,63 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2DP 0.6 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_17", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ASA @BBL H2DP 0.6 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_17", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json index 7904005cab..9fb3fc0ddc 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2DP 0.8 nozzle.json @@ -1,128 +1,63 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2DP 0.8 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_34", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2DP 0.8 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_34", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json index 14b6adc4e3..540af08837 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.2 nozzle.json @@ -1,134 +1,95 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2S 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_27", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2S 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_27", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json index 1bc719e589..3b583b2865 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.6 nozzle.json @@ -1,134 +1,119 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2S 0.6 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_36", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ASA @BBL H2S 0.6 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_36", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35", + "25" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json index 9723a3756f..9c15cc5cc3 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S 0.8 nozzle.json @@ -1,134 +1,107 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2S 0.8 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_35", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL H2S 0.8 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_35", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json index 99be696bec..b36583a6e4 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL H2S.json @@ -1,134 +1,119 @@ { - "type": "filament", - "name": "Bambu ASA @BBL H2S", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_26", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu ASA @BBL H2S", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_26", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "20", + "35", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json index cf15742854..53676c7bc2 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.2 nozzle.json @@ -1,192 +1,102 @@ { - "type": "filament", - "name": "Bambu ASA @BBL P2S 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_15", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "65" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL P2S 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_15", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0" + ], + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json index 11ab00acb8..b06aaf1b4a 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.4 nozzle.json @@ -1,186 +1,104 @@ { - "type": "filament", - "name": "Bambu ASA @BBL P2S 0.4 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_16", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "65" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "25" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ASA @BBL P2S 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_16", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "25", + "18" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json index 3ae3da7e29..463333a491 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.6 nozzle.json @@ -1,189 +1,117 @@ { - "type": "filament", - "name": "Bambu ASA @BBL P2S 0.6 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_14", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "65" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "fan_min_speed": [ - "25" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ASA @BBL P2S 0.6 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_14", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_min": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "fan_min_speed": [ + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "35", + "18" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json index b9b1974d28..284e476b53 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL P2S 0.8 nozzle.json @@ -1,186 +1,91 @@ { - "type": "filament", - "name": "Bambu ASA @BBL P2S 0.8 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_32", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "fan_min_speed": [ - "25" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL P2S 0.8 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_32", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "fan_min_speed": [ + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json index 0f942eb9c0..d7fa4d563a 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.2 nozzle.json @@ -1,119 +1,50 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_03", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_03", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json index f3ab38a4c2..63e38090f7 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1 0.6 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1 0.6 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_04", - "instantiation": "true", - "fan_min_speed": [ - "25" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_speed": [ - "0.4", - "0.4" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "V" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1 0.6 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_04", + "instantiation": "true", + "fan_min_speed": [ + "25" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_speed": [ + "0.4", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp_initial_layer": [ + "V" + ], + "compatible_printers": [ + "Bambu Lab X1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json index 03c9bd988a..442ccbdfc5 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.2 nozzle.json @@ -1,121 +1,52 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1C 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1C 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_01", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json index aba1ae8e63..358a7e83c0 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C 0.4 nozzle.json @@ -1,126 +1,65 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1C 0.4 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1C 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json index 043405a082..ab1677285e 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1C.json @@ -1,127 +1,66 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1C", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_00", - "instantiation": "true", - "fan_min_speed": [ - "25" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1C", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_00", + "instantiation": "true", + "fan_min_speed": [ + "25" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json index 434e5b3169..bf2df2143a 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.2 nozzle.json @@ -1,119 +1,50 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1E 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_06", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1E 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_06", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json index 8200afe8b1..9080ee1bb6 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E 0.4 nozzle.json @@ -1,119 +1,50 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1E 0.4 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_07", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1E 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_07", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json index 3a45999811..9336323c61 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X1E.json @@ -1,123 +1,54 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X1E", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_05", - "instantiation": "true", - "fan_min_speed": [ - "25" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X1E", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_05", + "instantiation": "true", + "fan_min_speed": [ + "25" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json index a2d4ee198c..ae13ba1ba3 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.2 nozzle.json @@ -1,293 +1,128 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X2D 0.2 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_21", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0094" - ], - "counter_coef_3": [ - "-0.0092" - ], - "counter_limit_max": [ - "0.2258" - ], - "counter_limit_min": [ - "-0.0092" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "2", - "2" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "0.0013" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1586" - ], - "hole_limit_min": [ - "0.1261" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA @BBL X2D 0.2 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_21", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json index 0049bdd6bd..f5aedbd3c7 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.4 nozzle.json @@ -1,293 +1,157 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X2D 0.4 nozzle", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_22", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0094" - ], - "counter_coef_3": [ - "-0.0092" - ], - "counter_limit_max": [ - "0.2258" - ], - "counter_limit_min": [ - "-0.0092" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "18", - "25", - "18", - "20" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "0.0013" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1586" - ], - "hole_limit_min": [ - "0.1261" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ASA @BBL X2D 0.4 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_22", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "18", + "25", + "18", + "18", + "20", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..4bf30b3fce --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D 0.8 nozzle.json @@ -0,0 +1,149 @@ +{ + "type": "filament", + "name": "Bambu ASA @BBL X2D 0.8 nozzle", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_50", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "fan_min_speed": [ + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "8.0", + "12", + "8.0" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "18", + "35", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json index b3b5e73c4c..38c96bff13 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu ASA @BBL X2D.json @@ -1,297 +1,157 @@ { - "type": "filament", - "name": "Bambu ASA @BBL X2D", - "inherits": "Bambu ASA @base", - "from": "system", - "setting_id": "GFSB01_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0094" - ], - "counter_coef_3": [ - "-0.0092" - ], - "counter_limit_max": [ - "0.2258" - ], - "counter_limit_min": [ - "-0.0092" - ], - "fan_min_speed": [ - "25" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "18", - "35", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "0.0013" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1586" - ], - "hole_limit_min": [ - "0.1261" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu ASA @BBL X2D", + "inherits": "Bambu ASA @base", + "from": "system", + "setting_id": "GFSB01_20", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0094" + ], + "counter_coef_3": [ + "-0.0092" + ], + "counter_limit_max": [ + "0.2258" + ], + "counter_limit_min": [ + "-0.0092" + ], + "fan_min_speed": [ + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "18", + "35", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0013" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1586" + ], + "hole_limit_min": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu ASA @base.json b/resources/profiles/BBL/filament/Bambu ASA @base.json index 5e66d50419..e1314043ef 100644 --- a/resources/profiles/BBL/filament/Bambu ASA @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA @base.json @@ -1,57 +1,54 @@ { - "type": "filament", - "name": "Bambu ASA @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OFfBpSRI", - "instantiation": "false", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "35" - ], - "filament_cost": [ - "31.99" - ], - "filament_density": [ - "1.05" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "impact_strength_z": [ - "4.9" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ] -} + "type": "filament", + "name": "Bambu ASA @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OFfBpSRI", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "35" + ], + "filament_cost": [ + "26.99" + ], + "filament_density": [ + "1.05" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL A1.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL A1.json index 08c89cd1d2..ceca584ce1 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL A1", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_02", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL A1", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json index 54d58171c5..f26386bdfc 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C 0.4 nozzle.json @@ -1,174 +1,116 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL H2C 0.4 nozzle", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "1.5", - "1.5" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "5", - "5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop": [ - "0", - "0" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL H2C 0.4 nozzle", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "1.5" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "5", + "5", + "5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop": [ + "0", + "0", + "0" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C.json index af6afa3b7b..c9d84e07dc 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2C.json @@ -1,175 +1,117 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL H2C", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "1.5", - "1.5" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "5", - "5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop": [ - "0", - "0" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL H2C", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "1.5" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "5", + "5", + "5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop": [ + "0", + "0", + "0" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json index 0e2e74f3f3..50e18b0199 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2D.json @@ -1,130 +1,66 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL H2D", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL H2D", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2DP.json index f77d850506..2b4239fd68 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2DP.json @@ -1,130 +1,53 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL H2DP", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_05", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL H2DP", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2S.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2S.json index 3c76624c3d..8d5c0248b2 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL H2S.json @@ -1,130 +1,96 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL H2S", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1.5", - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "5", - "5" - ], - "filament_z_hop": [ - "0", - "0" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL H2S", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "1.5" + ], + "filament_wipe_distance": [ + "5", + "5", + "5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop": [ + "0", + "0", + "0" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P1P.json index 00ea67fa8e..b6dbf0022b 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P1P.json @@ -1,121 +1,60 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL P1P", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "1.5", - "1.5" - ], - "filament_wipe_distance": [ - "5", - "5" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL P1P", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_length": [ + "1.5", + "1.5" + ], + "filament_wipe_distance": [ + "5", + "5" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P2S.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P2S.json index 832871142c..592b65fef4 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL P2S.json @@ -1,170 +1,92 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL P2S", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_04", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1.5", - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "5", - "5" - ], - "filament_z_hop": [ - "0", - "0" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL P2S", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_04", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "1.5" + ], + "filament_wipe_distance": [ + "5", + "5", + "5" + ], + "filament_z_hop": [ + "0", + "0", + "0" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X1C.json index f434bea9f5..8b6bc1aadb 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X1C.json @@ -1,130 +1,69 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL X1C", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.52", - "0.52" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "1.5", - "1.5" - ], - "filament_wipe_distance": [ - "5", - "5" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL X1C", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_length": [ + "1.5", + "1.5" + ], + "filament_wipe_distance": [ + "5", + "5" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json index 4e948ec55a..68d386090f 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D 0.4 nozzle.json @@ -1,269 +1,114 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL X2D 0.4 nozzle", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "1.5", - "1.5", - "1.5", - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "5", - "5", - "5", - "5" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift", - "Normal Lift", - "Normal Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.52", - "0.52", - "0.52", - "0.52" - ], - "filament_max_volumetric_speed": [ - "3", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL X2D 0.4 nozzle", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52", + "0.52", + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "6", + "12", + "6", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "1.5", + "1.5", + "1.5", + "1.5" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe_distance": [ + "5", + "5", + "5", + "5", + "5", + "5" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D.json index 7b2293c644..1d7084126f 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @BBL X2D.json @@ -1,270 +1,115 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @BBL X2D", - "inherits": "Bambu ASA-Aero @base", - "from": "system", - "setting_id": "GFSB02_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "1.5", - "1.5", - "1.5", - "1.5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "5", - "5", - "5", - "5" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Normal Lift", - "Normal Lift", - "Normal Lift", - "Normal Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.52", - "0.52", - "0.52", - "0.52" - ], - "filament_max_volumetric_speed": [ - "3", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @BBL X2D", + "inherits": "Bambu ASA-Aero @base", + "from": "system", + "setting_id": "GFSB02_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52", + "0.52", + "0.52", + "0.52" + ], + "filament_max_volumetric_speed": [ + "3", + "12", + "3", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "1.5", + "1.5", + "1.5", + "1.5" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "filament_wipe_distance": [ + "5", + "5", + "5", + "5", + "5", + "5" + ], + "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "6", + "3", + "6", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json index 43c69be716..e922b2c7df 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA-Aero @base.json @@ -1,66 +1,66 @@ { - "type": "filament", - "name": "Bambu ASA-Aero @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OFXzQ4yL", - "instantiation": "false", - "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "49.99" - ], - "filament_density": [ - "0.99" - ], - "filament_flow_ratio": [ - "0.52" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retraction_length": [ - "1.5" - ], - "filament_type": [ - "ASA-AERO" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_wipe_distance": [ - "5" - ], - "filament_z_hop_types": [ - "Normal Lift" - ], - "filament_dev_drying_cooling_temperature": [ - "70" - ], - "impact_strength_z": [ - "3.4" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "overhang_fan_speed": [ - "50" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "5" - ] -} + "type": "filament", + "name": "Bambu ASA-Aero @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OFXzQ4yL", + "instantiation": "false", + "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: ASA Aero Printing Guide.", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "46.99" + ], + "filament_density": [ + "0.99" + ], + "filament_dev_drying_cooling_temperature": [ + "70" + ], + "filament_flow_ratio": [ + "0.52" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_length": [ + "1.5" + ], + "filament_type": [ + "ASA-AERO" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_wipe_distance": [ + "5" + ], + "filament_z_hop_types": [ + "Normal Lift" + ], + "impact_strength_z": [ + "3.4" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "overhang_fan_speed": [ + "50" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "5" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json index 10dddf6434..442f2b6230 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1 0.6 nozzle.json @@ -1,12 +1,12 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL A1 0.6 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_05", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL A1 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_05", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json index 11fc104be5..70c164accf 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL A1.json @@ -1,11 +1,11 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL A1", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_04", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL A1", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json index f6b7e6dc8c..64db4fe9eb 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C 0.4 nozzle.json @@ -1,180 +1,102 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_14", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "235", - "235" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "95" - ], - "textured_plate_temp": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_14", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "90" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_pre_cooling_temperature_nc": [ + "235", + "235", + "235" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retraction_length": [ + "1.2", + "1.2", + "1.2" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "95" + ], + "textured_plate_temp": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C.json index 7ae4df95b1..0cf8596dca 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2C.json @@ -1,175 +1,97 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL H2C", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_15", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "235", - "235" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "95" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL H2C", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_15", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_pre_cooling_temperature_nc": [ + "235", + "235", + "235" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retraction_length": [ + "1.2", + "1.2", + "1.2" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "95" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json index ee9d7d06af..53c44ddc9c 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.4 nozzle.json @@ -1,134 +1,75 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL H2D 0.4 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_06", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "textured_plate_temp": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL H2D 0.4 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "90" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json index 73f350f6b6..37dc06bc9e 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2D 0.6 nozzle.json @@ -1,129 +1,70 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL H2D 0.6 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL H2D 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.4 nozzle.json index 1e385a3161..b3050aecc6 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.4 nozzle.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL H2DP 0.4 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "textured_plate_temp": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL H2DP 0.4 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "90" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.6 nozzle.json index c6c3132087..a10dd2783f 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2DP 0.6 nozzle.json @@ -1,129 +1,56 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL H2DP 0.6 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_11", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL H2DP 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_11", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2S.json index 90b0e34558..9700df7ca0 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL H2S.json @@ -1,130 +1,81 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL H2S", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_16", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL H2S", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_16", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json index 046e09c964..65e12dfc7d 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P 0.6 nozzle.json @@ -1,120 +1,57 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_03", - "instantiation": "true", - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL P1P 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_03", + "instantiation": "true", + "filament_flow_ratio": [ + "0.89", + "0.89" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "overhang_fan_speed": [ + "90" + ], + "pre_start_fan_time": [ + "3" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json index 565b571732..9f5fb5e0e1 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P1P.json @@ -1,119 +1,56 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL P1P", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL P1P", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.89", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "overhang_fan_speed": [ + "90" + ], + "pre_start_fan_time": [ + "3" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.4 nozzle.json index d104343ea6..30b6e616e6 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.4 nozzle.json @@ -1,186 +1,78 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL P2S 0.4 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_08", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL P2S 0.4 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_08", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "nil", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.6 nozzle.json index b12aa7333d..fdff13b164 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL P2S 0.6 nozzle.json @@ -1,187 +1,79 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL P2S 0.6 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_09", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL P2S 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_09", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "nil", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json index b534868de7..3c55f436ea 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C 0.6 nozzle.json @@ -1,126 +1,63 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL X1C 0.6 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.89", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "overhang_fan_speed": [ + "90" + ], + "pre_start_fan_time": [ + "3" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json index 89f32a24fd..0057078bcb 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X1C.json @@ -1,122 +1,59 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL X1C", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL X1C", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.89", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "overhang_fan_speed": [ + "90" + ], + "pre_start_fan_time": [ + "3" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json index 1f43c3e688..086b33b549 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D 0.4 nozzle.json @@ -1,269 +1,98 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_12", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.9", - "0.9", - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "275" - ], - "nozzle_temperature": [ - "275", - "275", - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275", - "275", - "275" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9", + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "nil", + "1.2", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "275" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D.json index 9352ed31ad..c221226aa0 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @BBL X2D.json @@ -1,270 +1,99 @@ { - "type": "filament", - "name": "Bambu ASA-CF @BBL X2D", - "inherits": "Bambu ASA-CF @base", - "from": "system", - "setting_id": "GFSB51_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.9", - "0.9", - "0.9", - "0.9" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "275" - ], - "nozzle_temperature": [ - "275", - "275", - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275", - "275", - "275" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu ASA-CF @BBL X2D", + "inherits": "Bambu ASA-CF @base", + "from": "system", + "setting_id": "GFSB51_13", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9", + "0.9", + "0.9", + "0.9" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "nil", + "1.2", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "275" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu ASA-CF @base.json b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json index bf957889b6..210bdbf04a 100644 --- a/resources/profiles/BBL/filament/Bambu ASA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu ASA-CF @base.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu ASA-CF @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OF0wBGNx", - "instantiation": "false", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "25" - ], - "filament_cost": [ - "36.99" - ], - "filament_density": [ - "1.02" - ], - "filament_flow_ratio": [ - "0.9" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_type": [ - "ASA-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], + "type": "filament", + "name": "Bambu ASA-CF @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OF0wBGNx", + "instantiation": "false", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "25" + ], + "filament_cost": [ + "33.99" + ], + "filament_density": [ + "1.02" + ], "filament_dev_drying_cooling_temperature": [ "95" ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "impact_strength_z": [ - "9.4" - ], - "nozzle_temperature": [ - "275" - ], - "nozzle_temperature_initial_layer": [ - "275" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "108" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ] -} + "filament_flow_ratio": [ + "0.9" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_type": [ + "ASA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "impact_strength_z": [ + "9.4" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "108" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL A1.json index 6e1281bb2f..7f19de7665 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL A1.json @@ -1,31 +1,34 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL A1", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL A1", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json index 4cc1673410..ffc578ba28 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C 0.4 nozzle.json @@ -1,171 +1,88 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C.json index 3182fc7db5..446a08eff1 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2C.json @@ -1,172 +1,89 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL H2C", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL H2C", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json index 00a6b5f08e..cee8d53842 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2D.json @@ -1,130 +1,66 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL H2D", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL H2D", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2DP.json index 9dc3c985b2..760fc62815 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2DP.json @@ -1,130 +1,53 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL H2DP", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL H2DP", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2S.json index e8db9dabc1..b1a9ff5a1b 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL H2S.json @@ -1,142 +1,91 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL H2S", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "full_fan_speed_layer": [ - "2" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL H2S", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL P2S.json index a5321a628a..2d6934a50f 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL P2S.json @@ -1,182 +1,87 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL P2S", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_03", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "full_fan_speed_layer": [ - "2" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL P2S", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_03", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json index e3ebff6b9e..52af58d8ba 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1C.json @@ -1,139 +1,69 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL X1C", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN00", - "instantiation": "true", - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "fan_cooling_layer_time": [ - "5" - ], - "full_fan_speed_layer": [ - "2" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL X1C", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json index 9539b0ba39..b12f9f014e 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X1E.json @@ -1,136 +1,66 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL X1E", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_00", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "full_fan_speed_layer": [ - "2" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL X1E", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json index 57bfcb4d75..4cd5698e7f 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D 0.4 nozzle.json @@ -1,281 +1,102 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "additional_fan_full_speed_layer": [ - "2" - ], - "chamber_temperatures": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_05", + "instantiation": "true", + "additional_fan_full_speed_layer": [ + "2" + ], + "chamber_temperatures": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "full_fan_speed_layer": [ + "2" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D.json index c9f8772c79..384d2e4f3b 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @BBL X2D.json @@ -1,282 +1,103 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL X2D", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN03_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "additional_fan_full_speed_layer": [ - "2" - ], - "chamber_temperatures": [ - "60" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL X2D", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN03_06", + "instantiation": "true", + "additional_fan_full_speed_layer": [ + "2" + ], + "chamber_temperatures": [ + "60" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "full_fan_speed_layer": [ + "2" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA-CF @base.json b/resources/profiles/BBL/filament/Bambu PA-CF @base.json index 47e1cc6ae1..56438fdc74 100644 --- a/resources/profiles/BBL/filament/Bambu PA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA-CF @base.json @@ -1,42 +1,42 @@ { - "type": "filament", - "name": "Bambu PA-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFFNYwWR", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "filament_cost": [ - "84.99" - ], - "filament_density": [ - "1.09" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "5.7" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "temperature_vitrification": [ - "170" - ] -} + "type": "filament", + "name": "Bambu PA-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFFNYwWR", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_cost": [ + "84.99" + ], + "filament_density": [ + "1.09" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "5.7" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "170" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL A1.json index 6a6b84d57d..c8ad4d3ae3 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL A1", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_00", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA6-CF @BBL A1", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json index 55082c4c58..d5f0e48284 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C 0.4 nozzle.json @@ -1,198 +1,115 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0016" - ], - "counter_coef_3": [ - "0.0031" - ], - "counter_limit_max": [ - "0.0031" - ], - "counter_limit_min": [ - "-0.038" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_pre_cooling_temperature_nc": [ - "235", - "235" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.2194" - ], - "hole_limit_max": [ - "0.2194" - ], - "hole_limit_min": [ - "0.092" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PA6-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "counter_limit_max": [ + "0.0031" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "235", + "235", + "235" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "hole_limit_max": [ + "0.2194" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..298e08ad9e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C 0.8 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL H2C 0.8 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_18", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_pre_cooling_temperature_nc": [ + "235", + "235" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C.json index 52ef42a778..efe4561e5b 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2C.json @@ -1,199 +1,115 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL H2C", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0016" - ], - "counter_coef_3": [ - "0.0031" - ], - "counter_limit_max": [ - "0.0031" - ], - "counter_limit_min": [ - "-0.038" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_pre_cooling_temperature_nc": [ - "235", - "235" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.2194" - ], - "hole_limit_max": [ - "0.2194" - ], - "hole_limit_min": [ - "0.092" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PA6-CF @BBL H2C", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_pre_cooling_temperature_nc": [ + "235", + "235", + "235" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..81af096616 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D 0.6 nozzle.json @@ -0,0 +1,84 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL H2D 0.6 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_19", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00565" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..6734c692af --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D 0.8 nozzle.json @@ -0,0 +1,76 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL H2D 0.8 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_20", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00565" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json index 5c42b34f22..7af66f7591 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2D.json @@ -1,139 +1,88 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL H2D", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.00565" - ], - "counter_coef_3": [ - "-0.0202" - ], - "counter_limit_max": [ - "0.03" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA6-CF @BBL H2D", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..4c103b0344 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,78 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_21", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00565" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..1109cf18b9 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,78 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_22", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00565" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP.json index 8eddde5255..3296ee17fc 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2DP.json @@ -1,139 +1,60 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL H2DP", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_06", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.00565" - ], - "counter_coef_3": [ - "-0.0202" - ], - "counter_limit_max": [ - "0.03" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PA6-CF @BBL H2DP", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00565" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..7865bb6c73 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL H2S 0.6 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_23", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..08ad4903ca --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S 0.8 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL H2S 0.8 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_24", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S.json index 02c509c54b..0b4d91befa 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL H2S.json @@ -1,130 +1,98 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL H2S", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PA6-CF @BBL H2S", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..20193526c3 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.6 nozzle.json @@ -0,0 +1,106 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL P2S 0.6 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_25", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..a7945881c9 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S 0.8 nozzle.json @@ -0,0 +1,96 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL P2S 0.8 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_26", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S.json index 34b1c150dd..4ba451c4b5 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL P2S.json @@ -1,170 +1,94 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL P2S", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_05", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PA6-CF @BBL P2S", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_05", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..55fc6dc7fe --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C 0.6 nozzle.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL X1C 0.6 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_13", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "10" + ], + "filament_retraction_length": [ + "nil", + "0.6" + ], + "filament_z_hop": [ + "nil", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json index fea98c0cd9..a3bd80d4ad 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1C.json @@ -1,130 +1,59 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL X1C", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA6-CF @BBL X1C", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "10" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json index 221461bf4d..7dc61e0a97 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X1E.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL X1E", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA6-CF @BBL X1E", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json index 0d4b65e724..2f8844aac0 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.4 nozzle.json @@ -1,302 +1,147 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_01", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0016" - ], - "counter_coef_3": [ - "0.0031" - ], - "counter_limit_max": [ - "0.0031" - ], - "counter_limit_min": [ - "-0.038" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "275" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.2194" - ], - "hole_limit_max": [ - "0.2194" - ], - "hole_limit_min": [ - "0.092" - ], - "nozzle_temperature": [ - "275", - "275", - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275", - "275", - "275" - ], - "overhang_fan_speed": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PA6-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "1", + "1", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "275" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "overhang_fan_speed": [ + "55" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..facf99db42 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D 0.8 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "filament", + "name": "Bambu PA6-CF @BBL X2D 0.8 nozzle", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_27", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "275" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "275", + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D.json index 133ef2ee2d..ac8ddec3e2 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @BBL X2D.json @@ -1,294 +1,138 @@ { - "type": "filament", - "name": "Bambu PA6-CF @BBL X2D", - "inherits": "Bambu PA6-CF @base", - "from": "system", - "setting_id": "GFSN05_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0016" - ], - "counter_coef_3": [ - "0.0031" - ], - "counter_limit_max": [ - "0.0031" - ], - "counter_limit_min": [ - "-0.038" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "275" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.2194" - ], - "hole_limit_max": [ - "0.2194" - ], - "hole_limit_min": [ - "0.092" - ], - "nozzle_temperature": [ - "275", - "275", - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "275", - "275", - "275", - "275" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PA6-CF @BBL X2D", + "inherits": "Bambu PA6-CF @base", + "from": "system", + "setting_id": "GFSN05_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0016" + ], + "counter_coef_3": [ + "0.0031" + ], + "counter_limit_max": [ + "0.0031" + ], + "counter_limit_min": [ + "-0.038" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "nil", + "1", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "275" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.2194" + ], + "hole_limit_max": [ + "0.2194" + ], + "hole_limit_min": [ + "0.092" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "275", + "275", + "275", + "275", + "275", + "275" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json index 0bb143c6ef..a61d8babea 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA6-CF @base.json @@ -1,51 +1,51 @@ { - "type": "filament", - "name": "Bambu PA6-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFniMuTN", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "79.99" - ], - "filament_density": [ - "1.10" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "15.5" - ], - "nozzle_temperature": [ - "275" - ], - "nozzle_temperature_initial_layer": [ - "275" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "temperature_vitrification": [ - "170" - ] -} + "type": "filament", + "name": "Bambu PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFniMuTN", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "76.99" + ], + "filament_density": [ + "1.10" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "15.5" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "170" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL A1.json index 1ed3942c27..76b7da4332 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL A1.json @@ -1,22 +1,22 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL A1", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "10.5" - ], - "nozzle_temperature": [ - "265" - ], - "nozzle_temperature_initial_layer": [ - "265" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL A1", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "10.5" + ], + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json index 0b1d7c52eb..9b62b86c31 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C 0.4 nozzle.json @@ -1,174 +1,96 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "225", - "225" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "225", + "225", + "225" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "265", + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265", + "265" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C.json index 749ace320a..c998ace674 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2C.json @@ -1,175 +1,97 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL H2C", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "225", - "225" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL H2C", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "225", + "225", + "225" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "265", + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265", + "265" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json index d18edfcde0..8f41c7c44c 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2D.json @@ -1,130 +1,71 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL H2D", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL H2D", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "265", + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265", + "265" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2DP.json index 5a19b9d6d7..1b07db3f0f 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2DP.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL H2DP", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_05", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL H2DP", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265" + ], + "retraction_distances_when_ec": [ + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2S.json index d0886c7a65..31f74a0214 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL H2S.json @@ -1,130 +1,76 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL H2S", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL H2S", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "265", + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265", + "265" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P1P.json index db4e431667..03fbe7dba3 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P1P.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL P1P", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL P1P", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P2S.json index 0f45ef0971..dcfec62f7a 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL P2S.json @@ -1,170 +1,72 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL P2S", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_04", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL P2S", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_04", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "265", + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265", + "265" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X1C.json index 1ae1285e50..4aabf6b9ee 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X1C.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL X1C", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_00", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL X1C", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json index 14e7f3ba63..d6d658b84c 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D 0.4 nozzle.json @@ -1,266 +1,95 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5", - "10.5", - "10.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "265" - ], - "nozzle_temperature": [ - "265", - "265", - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265", - "265", - "265" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5", + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "1", + "1", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "265" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "265", + "265", + "265", + "265", + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265", + "265", + "265", + "265", + "265" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D.json index 83b90323f8..40283e5149 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @BBL X2D.json @@ -1,267 +1,96 @@ { - "type": "filament", - "name": "Bambu PA6-GF @BBL X2D", - "inherits": "Bambu PA6-GF @base", - "from": "system", - "setting_id": "GFSN08_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5", - "10.5", - "10.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "265" - ], - "nozzle_temperature": [ - "265", - "265", - "265", - "265" - ], - "nozzle_temperature_initial_layer": [ - "265", - "265", - "265", - "265" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @BBL X2D", + "inherits": "Bambu PA6-GF @base", + "from": "system", + "setting_id": "GFSN08_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5", + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "nil", + "1", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "265" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "265", + "265", + "265", + "265", + "265", + "265" + ], + "nozzle_temperature_initial_layer": [ + "265", + "265", + "265", + "265", + "265", + "265" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json index 2f9a674e54..b1c0f4db86 100644 --- a/resources/profiles/BBL/filament/Bambu PA6-GF @base.json +++ b/resources/profiles/BBL/filament/Bambu PA6-GF @base.json @@ -1,48 +1,51 @@ { - "type": "filament", - "name": "Bambu PA6-GF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFNk8bxk", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "59.99" - ], - "filament_density": [ - "1.14" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_type": [ - "PA-GF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "full_fan_speed_layer": [ - "2" - ], - "impact_strength_z": [ - "4.1" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "temperature_vitrification": [ - "180" - ] -} + "type": "filament", + "name": "Bambu PA6-GF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFNk8bxk", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "additional_fan_full_speed_layer": [ + "2" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "56.99" + ], + "filament_density": [ + "1.14" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-GF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "full_fan_speed_layer": [ + "2" + ], + "impact_strength_z": [ + "4.1" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL A1.json index f6a2d95cc5..c925657b6d 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL A1", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_00", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PAHT-CF @BBL A1", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_00", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json index 98bada741c..8e75eae01b 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C 0.4 nozzle.json @@ -1,198 +1,115 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_06", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.002" - ], - "counter_coef_3": [ - "-0.055" - ], - "counter_limit_max": [ - "-0.005" - ], - "counter_limit_min": [ - "-0.055" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.1686" - ], - "hole_limit_max": [ - "0.19" - ], - "hole_limit_min": [ - "0.1686" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_min": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_min": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..f0f47e1320 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C 0.8 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2C 0.8 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_20", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C.json index fea3dea1a3..01c84f593d 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2C.json @@ -1,199 +1,115 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL H2C", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.002" - ], - "counter_coef_3": [ - "-0.055" - ], - "counter_limit_max": [ - "-0.005" - ], - "counter_limit_min": [ - "-0.055" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.1686" - ], - "hole_limit_max": [ - "0.19" - ], - "hole_limit_min": [ - "0.1686" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2C", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..7d675689e5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D 0.6 nozzle.json @@ -0,0 +1,84 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2D 0.6 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_21", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00545" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..4b70ace7c5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D 0.8 nozzle.json @@ -0,0 +1,76 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2D 0.8 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_22", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00545" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json index e4bb40d3c6..6639b62a14 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2D.json @@ -1,139 +1,88 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL H2D", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_01", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.00545" - ], - "counter_coef_3": [ - "-0.0202" - ], - "counter_limit_max": [ - "0.03" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2D", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..88e3ea08c7 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,78 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_23", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00545" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..7fcc74104b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,78 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_24", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00545" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP.json index 2ff3440853..c9f352bb43 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2DP.json @@ -1,139 +1,60 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL H2DP", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.00545" - ], - "counter_coef_3": [ - "-0.0202" - ], - "counter_limit_max": [ - "0.03" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2DP", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.00545" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..186c1118cd --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S 0.6 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2S 0.6 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_25", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..f974d4c426 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S 0.8 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2S 0.8 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_26", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S.json index ced8efb784..ee24f90784 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL H2S.json @@ -1,130 +1,98 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL H2S", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PAHT-CF @BBL H2S", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..f133eedc1d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.6 nozzle.json @@ -0,0 +1,106 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL P2S 0.6 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_27", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..e0cab2e004 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S 0.8 nozzle.json @@ -0,0 +1,96 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL P2S 0.8 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_28", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S.json index 388db9c1ef..90443c1446 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL P2S.json @@ -1,170 +1,94 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL P2S", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_02", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PAHT-CF @BBL P2S", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_02", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..bccc102d2d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C 0.6 nozzle.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL X1C 0.6 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "12" + ], + "filament_retraction_length": [ + "nil", + "1.2" + ], + "filament_z_hop": [ + "nil", + "0.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json index ac1cb704af..f8bfc2d417 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X1C.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL X1C", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PAHT-CF @BBL X1C", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "12" + ], + "filament_z_hop": [ + "nil", + "0.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json index 32a05382ba..0f02b6ea95 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.4 nozzle.json @@ -1,299 +1,120 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_04", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.002" - ], - "counter_coef_3": [ - "-0.055" - ], - "counter_limit_max": [ - "-0.005" - ], - "counter_limit_min": [ - "-0.055" - ], - "fan_max_speed": [ - "45" - ], - "fan_min_speed": [ - "25" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.1686" - ], - "hole_limit_max": [ - "0.19" - ], - "hole_limit_min": [ - "0.1686" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "overhang_fan_speed": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PAHT-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "fan_max_speed": [ + "45" + ], + "fan_min_speed": [ + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "overhang_fan_speed": [ + "60" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..d4a2c11570 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D 0.8 nozzle.json @@ -0,0 +1,113 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL X2D 0.8 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_29", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D.json index 89c68e9c33..39fc532026 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @BBL X2D.json @@ -1,291 +1,111 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL X2D", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.002" - ], - "counter_coef_3": [ - "-0.055" - ], - "counter_limit_max": [ - "-0.005" - ], - "counter_limit_min": [ - "-0.055" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.1686" - ], - "hole_limit_max": [ - "0.19" - ], - "hole_limit_min": [ - "0.1686" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PAHT-CF @BBL X2D", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.002" + ], + "counter_coef_3": [ + "-0.055" + ], + "counter_limit_max": [ + "-0.005" + ], + "counter_limit_min": [ + "-0.055" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.1686" + ], + "hole_limit_max": [ + "0.19" + ], + "hole_limit_min": [ + "0.1686" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json index 80c0599caa..4a1d43c5f2 100644 --- a/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PAHT-CF @base.json @@ -1,51 +1,54 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OF2VFe4J", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "94.99" - ], - "filament_density": [ - "1.06" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "full_fan_speed_layer": [ - "2" - ], + "type": "filament", + "name": "Bambu PAHT-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OF2VFe4J", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "additional_fan_full_speed_layer": [ + "2" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "91.99" + ], + "filament_density": [ + "1.06" + ], "filament_dev_chamber_drying_time": [ "16" ], - "impact_strength_z": [ - "13.3" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "temperature_vitrification": [ - "180" - ] -} + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "full_fan_speed_layer": [ + "2" + ], + "impact_strength_z": [ + "13.3" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL A1 0.2 nozzle.json index e59e2fe946..790ddb7c4a 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PC @BBL A1 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_13", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "260" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL A1 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_13", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL A1.json b/resources/profiles/BBL/filament/Bambu PC @BBL A1.json index 69742e339f..fa10655ee8 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PC @BBL A1", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_14", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL A1", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_14", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.2 nozzle.json index 77cc5e92db..a3ba75304a 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.2 nozzle.json @@ -1,204 +1,111 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2C 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_33", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.0081" - ], - "counter_coef_3": [ - "0.0183" - ], - "counter_limit_max": [ - "0.2208" - ], - "counter_limit_min": [ - "0.0183" - ], - "fan_max_speed": [ - "40" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.0725" - ], - "hole_limit_max": [ - "0.095" - ], - "hole_limit_min": [ - "0.0725" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2C 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_33", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.6 nozzle.json index 6b8f2211d5..b53e6eaf93 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.6 nozzle.json @@ -1,204 +1,141 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2C 0.6 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_40", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.0081" - ], - "counter_coef_3": [ - "0.0183" - ], - "counter_limit_max": [ - "0.2208" - ], - "counter_limit_min": [ - "0.0183" - ], - "fan_max_speed": [ - "40" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "25", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.0725" - ], - "hole_limit_max": [ - "0.095" - ], - "hole_limit_min": [ - "0.0725" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PC @BBL H2C 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_40", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "25", + "30", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.8 nozzle.json index 366352bae8..f4f455a8b2 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2C 0.8 nozzle.json @@ -1,204 +1,127 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2C 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_41", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.0081" - ], - "counter_coef_3": [ - "0.0183" - ], - "counter_limit_max": [ - "0.2208" - ], - "counter_limit_min": [ - "0.0183" - ], - "fan_max_speed": [ - "40" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "25", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.0725" - ], - "hole_limit_max": [ - "0.095" - ], - "hole_limit_min": [ - "0.0725" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2C 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_41", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "25", + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2C.json index 12b7201a0f..b2bb924ca0 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2C.json @@ -1,204 +1,141 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2C", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_34", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.0081" - ], - "counter_coef_3": [ - "0.0183" - ], - "counter_limit_max": [ - "0.2208" - ], - "counter_limit_min": [ - "0.0183" - ], - "fan_max_speed": [ - "40" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retraction_length": [ - "0.4", - "0.6" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.0725" - ], - "hole_limit_max": [ - "0.095" - ], - "hole_limit_min": [ - "0.0725" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PC @BBL H2C", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_34", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_retraction_length": [ + "0.4", + "0.6", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json index 4f832f4dfb..fea45a13bd 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.2 nozzle.json @@ -1,134 +1,87 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2D 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_21", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2D 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_21", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json index 395b12cf5d..7877739470 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.4 nozzle.json @@ -1,134 +1,114 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2D 0.4 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_15", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2D 0.4 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_15", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "20", + "35", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json index 85f22b1870..50a080979a 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.6 nozzle.json @@ -1,134 +1,114 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2D 0.6 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_23", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2D 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_23", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "25", + "35", + "25" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json index a4682f124e..37aa3eb857 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2D 0.8 nozzle.json @@ -1,134 +1,103 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2D 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_22", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2D 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_22", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.2 nozzle.json index b3f3ea8e80..55575cee0b 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_28", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_28", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.4 nozzle.json index 208eb081f2..4f843feadd 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.4 nozzle.json @@ -1,134 +1,73 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_27", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PC @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_27", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.6 nozzle.json index cd00977aba..1417c3c5a0 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.6 nozzle.json @@ -1,134 +1,73 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_30", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PC @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_30", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.8 nozzle.json index a8f41a0449..01f3c1431f 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2DP 0.8 nozzle.json @@ -1,134 +1,73 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_29", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_29", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.2 nozzle.json index f17b3105aa..8b6b883bb6 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.2 nozzle.json @@ -1,131 +1,96 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2S 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_17", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2S 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_17", + "instantiation": "true", + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.6 nozzle.json index 43806d8491..21a6b513d5 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.6 nozzle.json @@ -1,134 +1,124 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2S 0.6 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_38", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PC @BBL H2S 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_38", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "25", + "35", + "25" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.8 nozzle.json index 11d2ca73d6..6564a05f22 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2S 0.8 nozzle.json @@ -1,134 +1,111 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2S 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_39", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL H2S 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_39", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PC @BBL H2S.json index a4a62b2304..0a6ae94079 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL H2S.json @@ -1,134 +1,124 @@ { - "type": "filament", - "name": "Bambu PC @BBL H2S", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_16", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PC @BBL H2S", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_16", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "20", + "35", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json index f5f0aae33e..4190eb1836 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.2 nozzle.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu PC @BBL P1S 0.2 nozzle", - "inherits": "Bambu PC @BBL X1C 0.2 nozzle", - "from": "system", - "setting_id": "GFSC00_06", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL P1S 0.2 nozzle", + "inherits": "Bambu PC @BBL X1C 0.2 nozzle", + "from": "system", + "setting_id": "GFSC00_06", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json index 8d15033586..0e0857954a 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.6 nozzle.json @@ -1,29 +1,45 @@ { - "type": "filament", - "name": "Bambu PC @BBL P1S 0.6 nozzle", - "inherits": "Bambu PC @BBL X1C 0.6 nozzle", - "from": "system", - "setting_id": "GFSC00_08", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL P1S 0.6 nozzle", + "inherits": "Bambu PC @BBL X1C 0.6 nozzle", + "from": "system", + "setting_id": "GFSC00_08", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_flow_ratio": [ + "0.94", + "0.945" + ], + "filament_retraction_length": [ + "nil", + "0.45" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json index 0bb8824525..144a5cae30 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S 0.8 nozzle.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu PC @BBL P1S 0.8 nozzle", - "inherits": "Bambu PC @BBL X1C 0.8 nozzle", - "from": "system", - "setting_id": "GFSC00_07", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL P1S 0.8 nozzle", + "inherits": "Bambu PC @BBL X1C 0.8 nozzle", + "from": "system", + "setting_id": "GFSC00_07", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json b/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json index eb9a5eaa40..4d6730fde8 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P1S.json @@ -1,29 +1,33 @@ { - "type": "filament", - "name": "Bambu PC @BBL P1S", - "inherits": "Bambu PC @BBL X1C", - "from": "system", - "setting_id": "GFSC00_05", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL P1S", + "inherits": "Bambu PC @BBL X1C", + "from": "system", + "setting_id": "GFSC00_05", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_max_volumetric_speed": [ + "18", + "29" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.4 nozzle.json index 23bea78851..37390058bf 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.4 nozzle.json @@ -1,189 +1,113 @@ { - "type": "filament", - "name": "Bambu PC @BBL P2S 0.4 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_20", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PC @BBL P2S 0.4 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_20", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "30", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.6 nozzle.json index 642dd4919e..0e8d81de92 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.6 nozzle.json @@ -1,149 +1,138 @@ { - "type": "filament", - "name": "Bambu PC @BBL P2S 0.6 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_26", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "40", - "40" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PC @BBL P2S 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_26", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_min": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "35", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "40", + "40", + "40" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_min": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.8 nozzle.json index 6f79279667..27a717ab89 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL P2S 0.8 nozzle.json @@ -1,149 +1,108 @@ { - "type": "filament", - "name": "Bambu PC @BBL P2S 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_25", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL P2S 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_25", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json index a0052d4ee4..b2227e037e 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.2 nozzle.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1C 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_02", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1C 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_02", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json index 6b86eb6cc3..e8b0cf29d0 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.6 nozzle.json @@ -1,126 +1,65 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1C 0.6 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_01", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1C 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_01", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.945" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.45" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json index a7e0cc8222..7b18784bc6 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C 0.8 nozzle.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1C 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_00", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1C 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_00", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json index dfe60f0ab3..2462d8ccb9 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1C.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1C", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1C", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "29" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json index a0078a3dbb..8cab064d11 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.2 nozzle.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1E 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1E 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json index 0409996248..6166c3653e 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.6 nozzle.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1E 0.6 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1E 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json index 0ee8891ad2..299637f67d 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E 0.8 nozzle.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1E 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_11", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1E 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_11", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json index a2bad02c4b..a0f287e1e5 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X1E.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC @BBL X1E", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X1E", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.4 nozzle.json index 4b4fb66fc0..ef08e157a6 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.4 nozzle.json @@ -1,302 +1,158 @@ { - "type": "filament", - "name": "Bambu PC @BBL X2D 0.4 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_18", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.0081" - ], - "counter_coef_3": [ - "0.0183" - ], - "counter_limit_max": [ - "0.2208" - ], - "counter_limit_min": [ - "0.0183" - ], - "fan_max_speed": [ - "55" - ], - "fan_min_speed": [ - "25" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "30", - "18", - "20" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.0725" - ], - "hole_limit_max": [ - "0.095" - ], - "hole_limit_min": [ - "0.0725" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PC @BBL X2D 0.4 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_18", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "55" + ], + "fan_min_speed": [ + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "30", + "18", + "18", + "20", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "120" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.8 nozzle.json index 00d22e5e27..45a270ee3a 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X2D 0.8 nozzle.json @@ -1,296 +1,125 @@ { - "type": "filament", - "name": "Bambu PC @BBL X2D 0.8 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_37", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.0081" - ], - "counter_coef_3": [ - "0.0183" - ], - "counter_limit_max": [ - "0.2208" - ], - "counter_limit_min": [ - "0.0183" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "35", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.0725" - ], - "hole_limit_max": [ - "0.095" - ], - "hole_limit_min": [ - "0.0725" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC @BBL X2D 0.8 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_37", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "35", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PC @BBL X2D.json index 8e388cacbe..dfd7ca334f 100644 --- a/resources/profiles/BBL/filament/Bambu PC @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PC @BBL X2D.json @@ -1,296 +1,149 @@ { - "type": "filament", - "name": "Bambu PC @BBL X2D", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_31", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "0.0081" - ], - "counter_coef_3": [ - "0.0183" - ], - "counter_limit_max": [ - "0.2208" - ], - "counter_limit_min": [ - "0.0183" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "35", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "hole_coef_2": [ - "0.0009" - ], - "hole_coef_3": [ - "0.0725" - ], - "hole_limit_max": [ - "0.095" - ], - "hole_limit_min": [ - "0.0725" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PC @BBL X2D", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_31", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "0.0081" + ], + "counter_coef_3": [ + "0.0183" + ], + "counter_limit_max": [ + "0.2208" + ], + "counter_limit_min": [ + "0.0183" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "35", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "hole_coef_2": [ + "0.0009" + ], + "hole_coef_3": [ + "0.0725" + ], + "hole_limit_max": [ + "0.095" + ], + "hole_limit_min": [ + "0.0725" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PC @base.json b/resources/profiles/BBL/filament/Bambu PC @base.json index ee235b17d6..bb6ffcaafd 100644 --- a/resources/profiles/BBL/filament/Bambu PC @base.json +++ b/resources/profiles/BBL/filament/Bambu PC @base.json @@ -1,20 +1,23 @@ { - "type": "filament", - "name": "Bambu PC @base", - "inherits": "fdm_filament_pc", - "from": "system", - "filament_id": "OFKhMPeX", - "instantiation": "false", - "filament_vendor": [ - "Bambu Lab" - ], - "filament_cost": [ - "39.99" - ], - "filament_flow_ratio": [ - "0.94" - ], - "impact_strength_z": [ - "9.0" - ] -} + "type": "filament", + "name": "Bambu PC @base", + "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "OFKhMPeX", + "instantiation": "false", + "filament_cost": [ + "36.99" + ], + "filament_density": [ + "1.185" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "9.0" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL A1 0.2 nozzle.json index d6ff51600a..4906468b1c 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL A1 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_15", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "260" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL A1 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_15", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL A1.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL A1.json index 337247b285..a26fd5f556 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL A1", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_14", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL A1", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_14", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.2 nozzle.json index 2753dcaf30..ffde022ea3 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.2 nozzle.json @@ -1,180 +1,87 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2C 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_32", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2C 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_32", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.4 nozzle.json index 660d134ea6..fcf1a079ce 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C 0.4 nozzle.json @@ -1,180 +1,117 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2C 0.4 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_31", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2C 0.4 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_31", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C.json index d5ee574f47..957304bc2a 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2C.json @@ -1,181 +1,118 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2C", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_33", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "90" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2C", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_33", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json index 2ae2f4ed31..e768297ad6 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.2 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2D 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_17", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2D 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_17", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json index 7c34976c60..75dffbd64b 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.4 nozzle.json @@ -1,134 +1,70 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2D 0.4 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_16", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2D 0.4 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_16", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json index a366b531e8..e30efad3f5 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.6 nozzle.json @@ -1,134 +1,70 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2D 0.6 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_18", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2D 0.6 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_18", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json index ea9a6e584a..9806d53088 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2D 0.8 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2D 0.8 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_19", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2D 0.8 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_19", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.2 nozzle.json index dadb07a4f8..d61c1da460 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_25", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_25", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.4 nozzle.json index 774db3dc5e..8902b0bd27 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.4 nozzle.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_24", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_24", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.6 nozzle.json index aa4b83bd64..0ba2dc14ed 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.6 nozzle.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_26", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_26", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.8 nozzle.json index 0872db982f..1b1768ef51 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2DP 0.8 nozzle.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_27", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_27", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S 0.2 nozzle.json index 373788d188..ebcb2129dd 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S 0.2 nozzle.json @@ -1,134 +1,75 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2S 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_35", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2S 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_35", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S.json index d27a54971c..cf9963a435 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL H2S.json @@ -1,136 +1,102 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL H2S", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_34", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL H2S", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_34", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P 0.2 nozzle.json index 44dec2a9ee..b9e028b071 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P 0.2 nozzle.json @@ -1,146 +1,73 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P1P 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_09", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P1P 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_09", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P.json index 176477533c..50c66f2864 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1P.json @@ -1,148 +1,75 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P1P", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_08", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P1P", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_08", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.2 nozzle.json index 47f67143b6..472acab285 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.2 nozzle.json @@ -1,143 +1,70 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P1S 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_05", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P1S 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_05", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.6 nozzle.json index 4626cde396..1089e6e4d7 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.6 nozzle.json @@ -1,143 +1,70 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P1S 0.6 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_06", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P1S 0.6 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_06", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.8 nozzle.json index c792e9c63a..a8d3cea654 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S 0.8 nozzle.json @@ -1,143 +1,70 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P1S 0.8 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_07", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P1S 0.8 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_07", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S.json index 0f4534446c..0150515d70 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P1S.json @@ -1,143 +1,70 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P1S", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_04", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P1S", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_04", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.4 nozzle.json index f1e5980a4f..ea21badf01 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.4 nozzle.json @@ -1,189 +1,89 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P2S 0.4 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_20", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P2S 0.4 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_20", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.6 nozzle.json index f5e1916e48..ae0a394959 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.6 nozzle.json @@ -1,189 +1,94 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P2S 0.6 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_22", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P2S 0.6 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_22", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.8 nozzle.json index 82ec0320ed..6698de66a4 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL P2S 0.8 nozzle.json @@ -1,189 +1,88 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL P2S 0.8 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_23", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL P2S 0.8 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_23", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.2 nozzle.json index 6a82227f4b..a58b3a34fc 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.2 nozzle.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1C 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_03", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1C 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_03", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.6 nozzle.json index 00bb8c1fff..5f9fc6b9f8 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.6 nozzle.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1C 0.6 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_01", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1C 0.6 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_01", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.8 nozzle.json index bbaa240d26..bf7f605858 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C 0.8 nozzle.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1C 0.8 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_02", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1C 0.8 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_02", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C.json index 1a0540d7a3..c30bef59b3 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1C.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1C", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_00", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1C", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_00", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.2 nozzle.json index 8711327d5a..d786e82f33 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.2 nozzle.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1E 0.2 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_11", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1E 0.2 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_11", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.6 nozzle.json index de3a6e75b3..f5545427f1 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.6 nozzle.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1E 0.6 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1E 0.6 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.8 nozzle.json index 8cb2b75c22..050855f467 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E 0.8 nozzle.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1E 0.8 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_13", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1E 0.8 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_13", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E.json index e7cf3e2627..5314f3101a 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X1E.json @@ -1,128 +1,55 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X1E", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X1E", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.4 nozzle.json index e855d956c7..ccdeb880a0 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.4 nozzle.json @@ -1,272 +1,125 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X2D 0.4 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_28", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X2D 0.4 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_28", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.8 nozzle.json index 305ddb6c5b..5c58c59432 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D 0.8 nozzle.json @@ -1,272 +1,101 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X2D 0.8 nozzle", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_40", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X2D 0.8 nozzle", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_40", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D.json index b57e2d3411..9dd52a836f 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @BBL X2D.json @@ -1,272 +1,125 @@ { - "type": "filament", - "name": "Bambu PC FR @BBL X2D", - "inherits": "Bambu PC FR @base", - "from": "system", - "setting_id": "GFSC01_29", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PC FR @BBL X2D", + "inherits": "Bambu PC FR @base", + "from": "system", + "setting_id": "GFSC01_29", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PC FR @base.json b/resources/profiles/BBL/filament/Bambu PC FR @base.json index 0ee463d08f..2f9e91dd67 100644 --- a/resources/profiles/BBL/filament/Bambu PC FR @base.json +++ b/resources/profiles/BBL/filament/Bambu PC FR @base.json @@ -1,23 +1,23 @@ { - "type": "filament", - "name": "Bambu PC FR @base", - "inherits": "fdm_filament_pc", - "from": "system", - "filament_id": "OFg57Nmc", - "instantiation": "false", - "filament_cost": [ - "0" - ], - "filament_density": [ - "1.19" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "8" - ] -} + "type": "filament", + "name": "Bambu PC FR @base", + "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "OFg57Nmc", + "instantiation": "false", + "filament_cost": [ + "51.99" + ], + "filament_density": [ + "1.19" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "8" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL A1.json index c6cae1f9d5..38cf590364 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL A1.json @@ -1,19 +1,49 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL A1", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_01", - "instantiation": "true", - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL A1", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_flow_ratio": [ + "0.9555" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_overhang_2_4_speed": [ + "35" + ], + "filament_overhang_3_4_speed": [ + "35" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json index 622e10d1a1..4633db0021 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C 0.4 nozzle.json @@ -1,204 +1,151 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_08", - "instantiation": "true", - "chamber_temperatures": [ - "50" - ], - "counter_coef_2": [ - "-0.0004" - ], - "counter_coef_3": [ - "-0.0156" - ], - "counter_limit_max": [ - "-0.015" - ], - "counter_limit_min": [ - "-0.025" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "5", - "5" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0003" - ], - "hole_coef_3": [ - "0.1741" - ], - "hole_limit_max": [ - "0.174" - ], - "hole_limit_min": [ - "0.167" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_08", + "instantiation": "true", + "chamber_temperatures": [ + "50" + ], + "counter_coef_2": [ + "-0.0004" + ], + "counter_coef_3": [ + "-0.0156" + ], + "counter_limit_max": [ + "-0.015" + ], + "counter_limit_min": [ + "-0.025" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9555", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "5", + "5" + ], + "filament_overhang_2_4_speed": [ + "35", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30", + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0003" + ], + "hole_coef_3": [ + "0.1741" + ], + "hole_limit_max": [ + "0.174" + ], + "hole_limit_min": [ + "0.167" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "10", + "10" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C.json index ed779934d1..cee2b21e4d 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2C.json @@ -1,208 +1,155 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL H2C", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_09", - "instantiation": "true", - "chamber_temperatures": [ - "50" - ], - "counter_coef_2": [ - "-0.0004" - ], - "counter_coef_3": [ - "-0.0156" - ], - "counter_limit_max": [ - "-0.015" - ], - "counter_limit_min": [ - "-0.025" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "5", - "5" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0003" - ], - "hole_coef_3": [ - "0.1741" - ], - "hole_limit_max": [ - "0.174" - ], - "hole_limit_min": [ - "0.167" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL H2C", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_09", + "instantiation": "true", + "chamber_temperatures": [ + "50" + ], + "counter_coef_2": [ + "-0.0004" + ], + "counter_coef_3": [ + "-0.0156" + ], + "counter_limit_max": [ + "-0.015" + ], + "counter_limit_min": [ + "-0.025" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9555", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "5", + "5" + ], + "filament_overhang_2_4_speed": [ + "35", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30", + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0003" + ], + "hole_coef_3": [ + "0.1741" + ], + "hole_limit_max": [ + "0.174" + ], + "hole_limit_min": [ + "0.167" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "10", + "10" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json index 7d2a224c52..204fcc2b98 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2D.json @@ -1,154 +1,129 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL H2D", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_02", - "instantiation": "true", - "chamber_temperatures": [ - "50" - ], - "counter_coef_2": [ - "0.0075" - ], - "counter_coef_3": [ - "-0.052" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.012" - ], - "hole_coef_3": [ - "0.35043" - ], - "hole_limit_min": [ - "0.07" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL H2D", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_02", + "instantiation": "true", + "chamber_temperatures": [ + "50" + ], + "counter_coef_2": [ + "-0.0004" + ], + "counter_coef_3": [ + "-0.0156" + ], + "counter_limit_max": [ + "-0.015" + ], + "counter_limit_min": [ + "-0.025" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9555", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30", + "30" + ], + "filament_prime_volume": [ + "30" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0003" + ], + "hole_coef_3": [ + "0.1741" + ], + "hole_limit_max": [ + "0.174" + ], + "hole_limit_min": [ + "0.167" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "10", + "10" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2DP.json index dee0d35351..d6a563e31f 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2DP.json @@ -1,154 +1,104 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL H2DP", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_05", - "instantiation": "true", - "chamber_temperatures": [ - "50" - ], - "counter_coef_2": [ - "0.0075" - ], - "counter_coef_3": [ - "-0.052" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.012" - ], - "hole_coef_3": [ - "0.35043" - ], - "hole_limit_min": [ - "0.07" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL H2DP", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_05", + "instantiation": "true", + "chamber_temperatures": [ + "50" + ], + "counter_coef_2": [ + "0.0075" + ], + "counter_coef_3": [ + "-0.052" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9555", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.012" + ], + "hole_coef_3": [ + "0.35043" + ], + "hole_limit_min": [ + "0.07" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "10" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2S.json index 7735a8231c..9eb410e996 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL H2S.json @@ -1,142 +1,139 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL H2S", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL H2S", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0004" + ], + "counter_coef_3": [ + "-0.0156" + ], + "counter_limit_max": [ + "-0.015" + ], + "counter_limit_min": [ + "-0.025" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9555", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30", + "30" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0003" + ], + "hole_coef_3": [ + "0.1741" + ], + "hole_limit_max": [ + "0.174" + ], + "hole_limit_min": [ + "0.167" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0", + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL P2S.json index c738120a0d..8d5f30f117 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL P2S.json @@ -1,179 +1,130 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL P2S", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_03", - "instantiation": "true", - "chamber_temperatures": [ - "50" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL P2S", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_03", + "instantiation": "true", + "chamber_temperatures": [ + "50" + ], + "counter_coef_2": [ + "-0.0004" + ], + "counter_coef_3": [ + "-0.0156" + ], + "counter_limit_max": [ + "-0.015" + ], + "counter_limit_min": [ + "-0.025" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.9555", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0003" + ], + "hole_coef_3": [ + "0.1741" + ], + "hole_limit_max": [ + "0.174" + ], + "hole_limit_min": [ + "0.167" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0", + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json index 646e6412ea..e119b37000 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1C.json @@ -1,133 +1,84 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL X1C", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL X1C", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_flow_ratio": [ + "0.9555", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json index 221e74b1a1..2e750018cf 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X1E.json @@ -1,130 +1,81 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL X1E", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_00", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL X1E", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_flow_ratio": [ + "0.9555", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json index ec8b228fbb..55a854c514 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D 0.4 nozzle.json @@ -1,311 +1,170 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "50" - ], - "counter_coef_2": [ - "-0.0004" - ], - "counter_coef_3": [ - "-0.0156" - ], - "counter_limit_max": [ - "-0.015" - ], - "counter_limit_min": [ - "-0.025" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "45" - ], - "fan_min_speed": [ - "25" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "-0.0003" - ], - "hole_coef_3": [ - "0.1741" - ], - "hole_limit_max": [ - "0.174" - ], - "hole_limit_min": [ - "0.167" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "overhang_fan_speed": [ - "50" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_06", + "instantiation": "true", + "chamber_temperatures": [ + "50" + ], + "counter_coef_2": [ + "-0.0004" + ], + "counter_coef_3": [ + "-0.0156" + ], + "counter_limit_max": [ + "-0.015" + ], + "counter_limit_min": [ + "-0.025" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.9555", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8", + "8", + "8", + "8", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50", + "50", + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30", + "30", + "30", + "30", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "hole_coef_2": [ + "-0.0003" + ], + "hole_coef_3": [ + "0.1741" + ], + "hole_limit_max": [ + "0.174" + ], + "hole_limit_min": [ + "0.167" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0", + "0", + "0", + "0", + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D.json index f9b90f58ab..277b655bf1 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @BBL X2D.json @@ -1,309 +1,163 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL X2D", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "50" - ], - "counter_coef_2": [ - "-0.0004" - ], - "counter_coef_3": [ - "-0.0156" - ], - "counter_limit_max": [ - "-0.015" - ], - "counter_limit_min": [ - "-0.025" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "hole_coef_2": [ - "-0.0003" - ], - "hole_coef_3": [ - "0.1741" - ], - "hole_limit_max": [ - "0.174" - ], - "hole_limit_min": [ - "0.167" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL X2D", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_07", + "instantiation": "true", + "chamber_temperatures": [ + "50" + ], + "counter_coef_2": [ + "-0.0004" + ], + "counter_coef_3": [ + "-0.0156" + ], + "counter_limit_max": [ + "-0.015" + ], + "counter_limit_min": [ + "-0.025" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.9555", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8", + "8", + "8", + "8", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50", + "50", + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30", + "30", + "30", + "30", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "hole_coef_2": [ + "-0.0003" + ], + "hole_coef_3": [ + "0.1741" + ], + "hole_limit_max": [ + "0.174" + ], + "hole_limit_min": [ + "0.167" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0", + "0", + "0", + "0", + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PET-CF @base.json b/resources/profiles/BBL/filament/Bambu PET-CF @base.json index c84d423f0e..71a669f723 100644 --- a/resources/profiles/BBL/filament/Bambu PET-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PET-CF @base.json @@ -1,52 +1,40 @@ { - "type": "filament", - "name": "Bambu PET-CF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFHa48An", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "84.99" - ], - "filament_density": [ - "1.29" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_adhesiveness_category": [ - "800" - ], - "filament_dev_chamber_drying_bed_temperature": [ - "90" + "type": "filament", + "name": "Bambu PET-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFHa48An", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_adhesiveness_category": [ + "800" + ], + "filament_cost": [ + "81.99" + ], + "filament_density": [ + "1.29" ], "filament_dev_ams_drying_ams_limitations": [ "1" @@ -54,67 +42,82 @@ "filament_dev_ams_drying_heat_distortion_temperature": [ "165" ], - "filament_dev_drying_cooling_temperature": [ - "150" - ], "filament_dev_ams_drying_temperature": [ "65", "80", "65", "80" ], + "filament_dev_chamber_drying_bed_temperature": [ + "90" + ], + "filament_dev_drying_cooling_temperature": [ + "150" + ], "filament_dev_drying_softening_temperature": [ "150" ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "impact_strength_z": [ - "4.5" - ], - "nozzle_temperature_range_low": [ - "260" - ], - "nozzle_temperature_range_high": [ - "290" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "required_nozzle_HRC": [ - "40" - ], - "supertack_plate_temp": [ - "80" - ], - "supertack_plate_temp_initial_layer": [ - "80" - ], - "slow_down_layer_time": [ - "2" - ], - "temperature_vitrification": [ - "185" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "impact_strength_z": [ + "4.5" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "pre_start_fan_time": [ + "2" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" + ], + "temperature_vitrification": [ + "185" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.2 nozzle.json index a77a117965..0bd8b9dbdf 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A1 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "35" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A1 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "35" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json index 72e51b3f39..ee66fc15fd 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1 0.8 nozzle.json @@ -1,54 +1,54 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A1 0.8 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_08", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "pre_start_fan_time": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A1 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_08", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "pre_start_fan_time": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1.json index 3f40e826aa..04fafe66e9 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1.json @@ -1,50 +1,53 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A1", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_06", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A1", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_06", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json index 4d6485baca..35d1d7ba99 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "35" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A1M 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "35" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json index 16138a89ca..be54cd2c9c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.4 nozzle.json @@ -1,50 +1,53 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_03", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A1M 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_03", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json index 2f812a4535..b4790e22e0 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A1M 0.8 nozzle.json @@ -1,54 +1,54 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_05", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "pre_start_fan_time": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A1M 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_05", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "pre_start_fan_time": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json index cf66b0831f..6aad5c0b5c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.2 nozzle.json @@ -1,74 +1,74 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A2L 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_26", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp_fast": [ - "255" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_overhang_4_4_speed": [ - "30" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "1" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A2L 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_26", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "255" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_overhang_4_4_speed": [ + "30" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "override_process_overhang_speed": [ + "1" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json index a0868f4ba7..0fa7607469 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.4 nozzle.json @@ -1,74 +1,74 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A2L 0.4 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_33", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_bridge_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_overhang_4_4_speed": [ - "20" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "overhang_fan_speed": [ - "50" - ], - "override_process_overhang_speed": [ - "1" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A2L 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_33", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_bridge_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_overhang_4_4_speed": [ + "20" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "override_process_overhang_speed": [ + "1" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json index a8142340e5..09a1c88d84 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.6 nozzle.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A2L 0.6 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_43", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A2L 0.6 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_43", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json index c7b58973cd..6e6a8af01c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL A2L 0.8 nozzle.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL A2L 0.8 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_27", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL A2L 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_27", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json index 855946e799..1767dc81c5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.2 nozzle.json @@ -1,183 +1,86 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2C 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_24", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "210", - "210" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL H2C 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_24", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json index 65cdb48cd0..9611d1f270 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.4 nozzle.json @@ -1,186 +1,123 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2C 0.4 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_23", - "instantiation": "true", - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_change_length": [ - "4" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "18", - "21" - ], - "filament_pre_cooling_temperature_nc": [ - "210", - "210" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL H2C 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_23", + "instantiation": "true", + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "21", + "18" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210", + "210" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..f84645846a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C 0.8 nozzle.json @@ -0,0 +1,119 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL H2C 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_44", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C.json index a329a80c3b..1b09bc58f6 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2C.json @@ -1,181 +1,122 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2C", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_25", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "21", - "28" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "210", - "210" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL H2C", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_25", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "21", + "28", + "21" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210", + "210" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json index 17d9507008..bc8b057d8a 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.2 nozzle.json @@ -1,138 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2D 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_15", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL H2D 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_15", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json index 8cadbdb29f..a2fd083bc2 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.4 nozzle.json @@ -1,138 +1,92 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2D 0.4 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_09", - "instantiation": "true", - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_09", + "instantiation": "true", + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "21", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "1" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json index 5412b73209..22ad00b017 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.6 nozzle.json @@ -1,136 +1,91 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2D 0.6 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_16", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "28" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "250", - "255" - ], - "nozzle_temperature_initial_layer": [ - "245", - "255" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL H2D 0.6 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_16", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "21", + "28", + "21" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "250", + "255", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..122c8a04cc --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2D 0.8 nozzle.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL H2D 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_45", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.2 nozzle.json index 1b8658937b..36bb96bd39 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.2 nozzle.json @@ -1,138 +1,62 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_20", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_20", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.4 nozzle.json index fdf36b445d..c2a14583c4 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.4 nozzle.json @@ -1,138 +1,77 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_19", - "instantiation": "true", - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_19", + "instantiation": "true", + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "18", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.6 nozzle.json index 8e8679dfb1..53a228357b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.6 nozzle.json @@ -1,136 +1,75 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_21", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "28" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "250", - "255" - ], - "nozzle_temperature_initial_layer": [ - "245", - "255" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_21", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..50663c56b2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_46", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.2 nozzle.json index 450303dee5..7c16a6a6c9 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.2 nozzle.json @@ -1,138 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2S 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_11", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL H2S 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_11", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.6 nozzle.json index ef961d0710..48fdf41ed8 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.6 nozzle.json @@ -1,178 +1,94 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2S 0.6 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_32", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "28" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "2", - "2" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL H2S 0.6 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_32", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "21", + "28", + "21" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..3887491880 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S 0.8 nozzle.json @@ -0,0 +1,96 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL H2S 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_47", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S.json index 08523d6ed9..a640e8927f 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL H2S.json @@ -1,135 +1,112 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL H2S", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_10", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "18", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "2", - "2" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL H2S", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_10", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "18", + "21", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2", + "2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.2 nozzle.json index ff103cd3e7..c718d3d5a3 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.2 nozzle.json @@ -1,138 +1,71 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL P2S 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_17", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL P2S 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_17", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.4 nozzle.json index 34f6fb644e..8c24685000 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.4 nozzle.json @@ -1,135 +1,95 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL P2S 0.4 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_14", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL P2S 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_14", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.6 nozzle.json index c39ac4aa82..1b5a5fb77e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.6 nozzle.json @@ -1,136 +1,100 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL P2S 0.6 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_18", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "23" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL P2S 0.6 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_18", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "21", + "23", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..0bcf1a6a65 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL P2S 0.8 nozzle.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL P2S 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_48", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "23" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json index 8f0ef2cd52..9d1f36e9f3 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.2 nozzle.json @@ -1,136 +1,59 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_00", - "instantiation": "true", - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL X1C 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_00", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json index 734ed32095..b7a18afcd6 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C 0.8 nozzle.json @@ -1,138 +1,84 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_02", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL X1C 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_02", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json index 41861cef81..a43717b952 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X1C.json @@ -1,130 +1,75 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL X1C", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_01", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL X1C", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_01", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json index d1062bae38..69852348e4 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.2 nozzle.json @@ -1,278 +1,131 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL X2D 0.2 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "250" - ], - "filament_tower_ironing_area": [ - "8" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "250", - "250", - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245", - "245", - "245" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL X2D 0.2 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_13", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "3", + "3" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "250" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "250", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json index fb53d02912..c6cba824fd 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.4 nozzle.json @@ -1,278 +1,140 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL X2D 0.4 nozzle", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_12", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "15", - "21", - "15", - "15" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "250" - ], - "filament_tower_ironing_area": [ - "8" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "250", - "250", - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245", - "245", - "245" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @BBL X2D 0.4 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_12", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "15", + "21", + "15", + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "250" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..bf242cb1c1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D 0.8 nozzle.json @@ -0,0 +1,131 @@ +{ + "type": "filament", + "name": "Bambu PETG Basic @BBL X2D 0.8 nozzle", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_49", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "16", + "23", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "250" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "250", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D.json index 699cf9611e..829448ab91 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @BBL X2D.json @@ -1,279 +1,137 @@ { - "type": "filament", - "name": "Bambu PETG Basic @BBL X2D", - "inherits": "Bambu PETG Basic @base", - "from": "system", - "setting_id": "GFSG00_22", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "23", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "250" - ], - "filament_tower_ironing_area": [ - "8" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "250", - "250", - "250", - "250" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245", - "245", - "245" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG Basic @BBL X2D", + "inherits": "Bambu PETG Basic @base", + "from": "system", + "setting_id": "GFSG00_22", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "23", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "250" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json index 619483a4b4..190dd69298 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Basic @base.json @@ -1,96 +1,87 @@ { - "type": "filament", - "name": "Bambu PETG Basic @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFFvzqcd", - "instantiation": "false", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_prime_volume_nc": [ - "60" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length": [ - "10" - ], - "filament_change_length_nc": [ - "10" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "impact_strength_z": [ - "13.6" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "override_process_overhang_speed": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PETG Basic @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFFvzqcd", + "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_change_length_nc": [ + "10" + ], + "filament_cost": [ + "13.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "impact_strength_z": [ + "13.6" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "60" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json index 77f6e452d3..d089948098 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A1 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A1 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json index ffb7a658bc..6dc3ba8f3c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1 0.8 nozzle.json @@ -1,45 +1,45 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A1 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A1 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json index 0b5b8b61ef..7f430d4393 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A1", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A1", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json index fd3b52c2db..4ba45d6b8a 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A1M 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A1M 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json index 0b13bb78e9..479e3ddd49 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M 0.8 nozzle.json @@ -1,45 +1,45 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A1M 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A1M 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json index 62169f35db..a638fb49e0 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A1M.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A1M", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A1M", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json index 210184c7ee..7ef3f24ad1 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.2 nozzle.json @@ -1,77 +1,77 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A2L 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_26", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp_fast": [ - "240" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_overhang_4_4_speed": [ - "30" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "100" - ], - "override_process_overhang_speed": [ - "1" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A2L 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_26", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "240" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_overhang_4_4_speed": [ + "30" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "100" + ], + "override_process_overhang_speed": [ + "1" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json index f816e7f742..7e34d59fe7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.6 nozzle.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A2L 0.6 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_49", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp_fast": [ - "240" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A2L 0.6 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_49", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "240" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json index eff5d65efc..7798ceef64 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L 0.8 nozzle.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A2L 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_27", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp_fast": [ - "240" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A2L 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_27", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "240" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L.json index bf03c0b74e..412c60c69c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL A2L.json @@ -1,71 +1,71 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL A2L", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_28", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "240" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "240" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "7" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL A2L", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_28", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "240" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "240" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "7" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json index 6e43d2467d..0fbf4068cb 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.2 nozzle.json @@ -1,216 +1,119 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2C 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_24", - "instantiation": "true", - "counter_coef_2": [ - "0.0058" - ], - "counter_coef_3": [ - "0.0107" - ], - "counter_limit_max": [ - "0.15" - ], - "counter_limit_min": [ - "0.01" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0042" - ], - "hole_coef_3": [ - "0.2006" - ], - "hole_limit_max": [ - "0.2" - ], - "hole_limit_min": [ - "0.09" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2C 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_24", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json index 03f2f3c393..71292a2121 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.6 nozzle.json @@ -1,216 +1,158 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2C 0.6 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_33", - "instantiation": "true", - "counter_coef_2": [ - "0.0058" - ], - "counter_coef_3": [ - "0.0107" - ], - "counter_limit_max": [ - "0.15" - ], - "counter_limit_min": [ - "0.01" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "30", - "35" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "2", - "2" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0042" - ], - "hole_coef_3": [ - "0.2006" - ], - "hole_limit_max": [ - "0.2" - ], - "hole_limit_min": [ - "0.09" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL H2C 0.6 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_33", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_min": [ + "0.01" + ], + "counter_limit_max": [ + "0.15" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "30", + "35", + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "2", + "2", + "2" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_min": [ + "0.09" + ], + "hole_limit_max": [ + "0.2" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json index d035ce27b3..6be40ba26d 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C 0.8 nozzle.json @@ -1,216 +1,143 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2C 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_34", - "instantiation": "true", - "counter_coef_2": [ - "0.0058" - ], - "counter_coef_3": [ - "0.0107" - ], - "counter_limit_max": [ - "0.15" - ], - "counter_limit_min": [ - "0.01" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "30", - "35" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "2", - "2" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0042" - ], - "hole_coef_3": [ - "0.2006" - ], - "hole_limit_max": [ - "0.2" - ], - "hole_limit_min": [ - "0.09" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2C 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_34", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "30", + "35" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "2", + "2" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C.json index 78644d0987..77226518e4 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2C.json @@ -1,216 +1,158 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2C", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_25", - "instantiation": "true", - "counter_coef_2": [ - "0.0058" - ], - "counter_coef_3": [ - "0.0107" - ], - "counter_limit_max": [ - "0.15" - ], - "counter_limit_min": [ - "0.01" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_tower_ironing_area": [ - "8" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "2", - "2" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.6" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0042" - ], - "hole_coef_3": [ - "0.2006" - ], - "hole_limit_max": [ - "0.2" - ], - "hole_limit_min": [ - "0.09" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL H2C", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_25", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_min": [ + "0.01" + ], + "counter_limit_max": [ + "0.15" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "25", + "35", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.6", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "2", + "2", + "2" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_min": [ + "0.09" + ], + "hole_limit_max": [ + "0.2" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json index 3953c3f68b..d7e22db57d 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.2 nozzle.json @@ -1,143 +1,95 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2D 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_14", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2D 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_14", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json index fabc0cd48e..e53509cfa5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.4 nozzle.json @@ -1,164 +1,124 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2D 0.4 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_09", - "instantiation": "true", - "counter_coef_2": [ - "0.007" - ], - "counter_coef_3": [ - "0.003" - ], - "counter_limit_max": [ - "0.1" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "fan_max_speed": [ - "30" - ], - "hole_coef_2": [ - "-0.006" - ], - "hole_coef_3": [ - "0.1" - ], - "hole_limit_min": [ - "0.1" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_09", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "25" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "1" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json index e19fb77cf7..4ebbc2da27 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.6 nozzle.json @@ -1,143 +1,126 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2D 0.6 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_15", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2D 0.6 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_15", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.8 nozzle.json index bf0e49095f..20402f5724 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2D 0.8 nozzle.json @@ -1,147 +1,119 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2D 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_29", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_id": [ - "1", - "1" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2D 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_29", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_extruder_id": [ + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.2 nozzle.json index 6a8237d798..e0eaa5b1f4 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.2 nozzle.json @@ -1,143 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_20", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_20", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.4 nozzle.json index 50b1586b33..7fec884516 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.4 nozzle.json @@ -1,161 +1,102 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_19", - "instantiation": "true", - "counter_coef_2": [ - "0.007" - ], - "counter_coef_3": [ - "0.003" - ], - "counter_limit_max": [ - "0.1" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.006" - ], - "hole_coef_3": [ - "0.1" - ], - "hole_limit_min": [ - "0.1" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_19", + "instantiation": "true", + "counter_coef_2": [ + "0.007" + ], + "counter_coef_3": [ + "0.003" + ], + "counter_limit_max": [ + "0.1" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.006" + ], + "hole_coef_3": [ + "0.1" + ], + "hole_limit_min": [ + "0.1" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.6 nozzle.json index f72a06450b..9a75d0fb5c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.6 nozzle.json @@ -1,143 +1,88 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_21", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_21", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.8 nozzle.json index abab8e9e03..d4f215c1f2 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2DP 0.8 nozzle.json @@ -1,143 +1,88 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_30", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "0.2", - "0.2" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_30", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.2 nozzle.json index 776c191ccf..ecfadc5c2f 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.2 nozzle.json @@ -1,146 +1,110 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2S 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2S 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_11", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_min": [ + "0.01" + ], + "counter_limit_max": [ + "0.15" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_min": [ + "0.09" + ], + "hole_limit_max": [ + "0.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.6 nozzle.json index f77ac4b413..a06b5d9f2a 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.6 nozzle.json @@ -1,146 +1,134 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2S 0.6 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_32", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL H2S 0.6 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_32", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_min": [ + "0.01" + ], + "counter_limit_max": [ + "0.15" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_min": [ + "0.09" + ], + "hole_limit_max": [ + "0.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.8 nozzle.json index 8e41f3d065..2c38bb2fd7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S 0.8 nozzle.json @@ -1,146 +1,122 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2S 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_31", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL H2S 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_31", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_min": [ + "0.01" + ], + "counter_limit_max": [ + "0.15" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_min": [ + "0.09" + ], + "hole_limit_max": [ + "0.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S.json index 192286470e..1fc3f03964 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL H2S.json @@ -1,146 +1,134 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL H2S", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "overhang_fan_speed": [ - "100" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL H2S", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_10", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_min": [ + "0.01" + ], + "counter_limit_max": [ + "0.15" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_min": [ + "0.09" + ], + "hole_limit_max": [ + "0.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "100" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P1P 0.4 nozzle.json new file mode 100644 index 0000000000..c50087e617 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P1P 0.4 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PETG HF @BBL P1P 0.4 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_35", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.95", + "0.952" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..782a19a045 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PETG HF @BBL P1S 0.4 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_36", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.95", + "0.952" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.2 nozzle.json index 2395c2dfb2..7160dd0f0d 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.2 nozzle.json @@ -1,183 +1,127 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL P2S 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "40" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "0", - "0" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL P2S 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_17", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "40" + ], + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "0", + "0" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.4 nozzle.json index 9f5ed9fb53..4ff218f195 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.4 nozzle.json @@ -1,180 +1,138 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL P2S 0.4 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_16", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "240", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "0", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL P2S 0.4 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_16", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_min": [ + "0.01" + ], + "counter_limit_max": [ + "0.15" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_flush_temp": [ + "240", + "0", + "240" + ], + "filament_max_volumetric_speed": [ + "21", + "30", + "21" + ], + "filament_retraction_distances_when_cut": [ + "0", + "10", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_min": [ + "0.09" + ], + "hole_limit_max": [ + "0.2" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.6 nozzle.json index 8caf08af09..10b8b449d7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.6 nozzle.json @@ -1,181 +1,133 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL P2S 0.6 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_18", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL P2S 0.6 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_18", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "21", + "35", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..f214212555 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL P2S 0.8 nozzle.json @@ -0,0 +1,132 @@ +{ + "type": "filament", + "name": "Bambu PETG HF @BBL P2S 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_50", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json index c75cac18d1..52cf7e42be 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.2 nozzle.json @@ -1,138 +1,66 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL X1C 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL X1C 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..5461db84fe --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.6 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PETG HF @BBL X1C 0.6 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_37", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.95", + "0.952" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json index c5247a5fb3..e0df40dfcc 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C 0.8 nozzle.json @@ -1,143 +1,82 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL X1C 0.8 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL X1C 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.95", + "0.952" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json index 5e9eb16394..38d2d0a11b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X1C.json @@ -1,138 +1,76 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL X1C", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL X1C", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.95", + "0.952" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json index 07bd51a1a9..20e69622e7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.2 nozzle.json @@ -1,311 +1,170 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL X2D 0.2 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0058" - ], - "counter_coef_3": [ - "0.0107" - ], - "counter_limit_max": [ - "0.15" - ], - "counter_limit_min": [ - "0.01" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "filament_tower_ironing_area": [ - "8" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0042" - ], - "hole_coef_3": [ - "0.2006" - ], - "hole_limit_max": [ - "0.2" - ], - "hole_limit_min": [ - "0.09" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL X2D 0.2 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_13", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "3", + "3" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json index 381ae65dd5..81ffc9bf01 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.4 nozzle.json @@ -1,311 +1,178 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_12", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0058" - ], - "counter_coef_3": [ - "0.0107" - ], - "counter_limit_max": [ - "0.15" - ], - "counter_limit_min": [ - "0.01" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "21", - "30", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "filament_tower_ironing_area": [ - "8" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0042" - ], - "hole_coef_3": [ - "0.2006" - ], - "hole_limit_max": [ - "0.2" - ], - "hole_limit_min": [ - "0.09" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG HF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_12", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "21", + "30", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "overhang_fan_speed": [ + "50" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..6db5064f92 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D 0.8 nozzle.json @@ -0,0 +1,170 @@ +{ + "type": "filament", + "name": "Bambu PETG HF @BBL X2D 0.8 nozzle", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_51", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "21", + "35", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D.json index e7e516b72a..84f2ede658 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @BBL X2D.json @@ -1,312 +1,178 @@ { - "type": "filament", - "name": "Bambu PETG HF @BBL X2D", - "inherits": "Bambu PETG HF @base", - "from": "system", - "setting_id": "GFSG02_22", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0058" - ], - "counter_coef_3": [ - "0.0107" - ], - "counter_limit_max": [ - "0.15" - ], - "counter_limit_min": [ - "0.01" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "21", - "35", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "filament_tower_ironing_area": [ - "8" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0042" - ], - "hole_coef_3": [ - "0.2006" - ], - "hole_limit_max": [ - "0.2" - ], - "hole_limit_min": [ - "0.09" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG HF @BBL X2D", + "inherits": "Bambu PETG HF @base", + "from": "system", + "setting_id": "GFSG02_22", + "instantiation": "true", + "counter_coef_2": [ + "0.0058" + ], + "counter_coef_3": [ + "0.0107" + ], + "counter_limit_max": [ + "0.15" + ], + "counter_limit_min": [ + "0.01" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "21", + "35", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0042" + ], + "hole_coef_3": [ + "0.2006" + ], + "hole_limit_max": [ + "0.2" + ], + "hole_limit_min": [ + "0.09" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG HF @base.json b/resources/profiles/BBL/filament/Bambu PETG HF @base.json index 1c12d679fd..fefe42ac28 100644 --- a/resources/profiles/BBL/filament/Bambu PETG HF @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG HF @base.json @@ -1,89 +1,89 @@ { - "type": "filament", - "name": "Bambu PETG HF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFovEIbw", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.28" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_change_length": [ - "12" - ], - "filament_prime_volume": [ - "30" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "impact_strength_z": [ - "10.6" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PETG HF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFovEIbw", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_change_length": [ + "12" + ], + "filament_cost": [ + "15.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_prime_volume": [ + "30" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "impact_strength_z": [ + "10.6" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..e2bbaa0e7b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1 0.2 nozzle.json @@ -0,0 +1,47 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A1 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "35" + ], + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.8" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1 0.8 nozzle.json new file mode 100644 index 0000000000..f410300947 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A1 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_01", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "pre_start_fan_time": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1.json new file mode 100644 index 0000000000..f212c248e8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A1", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_02", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "235" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..5f3b510aa8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.2 nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A1M 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "35" + ], + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "7" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.4 nozzle.json new file mode 100644 index 0000000000..733839d8d8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.4 nozzle.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A1M 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_04", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..a3c52ef081 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A1M 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A1M 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_05", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "pre_start_fan_time": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.2 nozzle.json new file mode 100644 index 0000000000..be6d4bb72b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.2 nozzle.json @@ -0,0 +1,80 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A2L 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_flush_temp_fast": [ + "255" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_overhang_4_4_speed": [ + "30" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "override_process_overhang_speed": [ + "1" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.4 nozzle.json new file mode 100644 index 0000000000..366438e579 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.4 nozzle.json @@ -0,0 +1,80 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A2L 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_07", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_bridge_speed": [ + "50" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_overhang_4_4_speed": [ + "20" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "override_process_overhang_speed": [ + "1" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.6 nozzle.json new file mode 100644 index 0000000000..b614953750 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.6 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A2L 0.6 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_08", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.8 nozzle.json new file mode 100644 index 0000000000..b659affbc2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL A2L 0.8 nozzle.json @@ -0,0 +1,80 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL A2L 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_09", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.92" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "50" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.2 nozzle.json new file mode 100644 index 0000000000..11e340a26f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.2 nozzle.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2C 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_10", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.96", + "0.95" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.6", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.4 nozzle.json new file mode 100644 index 0000000000..1feb3bc3d1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.4 nozzle.json @@ -0,0 +1,126 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2C 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_11", + "instantiation": "true", + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.96", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "15", + "21", + "21" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210", + "210" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.6", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..57ada86690 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C 0.8 nozzle.json @@ -0,0 +1,125 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2C 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_12", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.96", + "0.97" + ], + "filament_max_volumetric_speed": [ + "15", + "28" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.6", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C.json new file mode 100644 index 0000000000..c848448b3b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2C.json @@ -0,0 +1,128 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2C", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_13", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.96", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "15", + "28", + "28" + ], + "filament_pre_cooling_temperature_nc": [ + "210", + "210", + "210" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.6", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..a50efe69d3 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.2 nozzle.json @@ -0,0 +1,77 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2D 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_14", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "nil" + ], + "filament_retraction_speed": [ + "30", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.4 nozzle.json new file mode 100644 index 0000000000..037dbb39fc --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.4 nozzle.json @@ -0,0 +1,105 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_15", + "instantiation": "true", + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_max_volumetric_speed": [ + "18", + "21", + "21" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "30", + "nil", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..a60362042d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.6 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2D 0.6 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_16", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_max_volumetric_speed": [ + "21", + "28", + "28" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.4", + "0.4" + ], + "filament_retraction_minimum_travel": [ + "30", + "nil", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..003c19bb28 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2D 0.8 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2D 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_17", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.4" + ], + "filament_retraction_speed": [ + "30", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.2 nozzle.json new file mode 100644 index 0000000000..8ba7e1fd4e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.2 nozzle.json @@ -0,0 +1,79 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_18", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "nil" + ], + "filament_retraction_minimum_travel": [ + "30", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.4 nozzle.json new file mode 100644 index 0000000000..201b082b3f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.4 nozzle.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_19", + "instantiation": "true", + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_max_volumetric_speed": [ + "18", + "21", + "21" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "30", + "nil", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..292a5d108e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_20", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_max_volumetric_speed": [ + "21", + "28", + "28" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "30", + "nil", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..085e159b28 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_21", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.4" + ], + "filament_retraction_speed": [ + "30", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.2 nozzle.json new file mode 100644 index 0000000000..ca2e8219fa --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.2 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2S 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_22", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..052d7c8068 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.6 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2S 0.6 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_23", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_max_volumetric_speed": [ + "21", + "28", + "28" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..3346abab97 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S 0.8 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2S 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_24", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "21", + "28" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S.json new file mode 100644 index 0000000000..0f95f15edd --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL H2S.json @@ -0,0 +1,109 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL H2S", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_25", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "18", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "2", + "2", + "2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..4f6e6b260a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.2 nozzle.json @@ -0,0 +1,75 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL P1P 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_49", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.4 nozzle.json new file mode 100644 index 0000000000..793997445f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.4 nozzle.json @@ -0,0 +1,87 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL P1P 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_50", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..6c379dd43d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P1P 0.6 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL P1P 0.6 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_51", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.2 nozzle.json new file mode 100644 index 0000000000..8f17112e84 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.2 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL P2S 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_38", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_overhang_2_4_speed": [ + "80", + "50" + ], + "filament_overhang_3_4_speed": [ + "50", + "30" + ], + "filament_overhang_4_4_speed": [ + "50", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil" + ], + "filament_tower_ironing_area": [ + "8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.4 nozzle.json new file mode 100644 index 0000000000..252bc6f136 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.4 nozzle.json @@ -0,0 +1,116 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL P2S 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_39", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_max_volumetric_speed": [ + "13", + "15", + "15" + ], + "filament_overhang_2_4_speed": [ + "80", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "50", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "50", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "240", + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..4297e9278c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.6 nozzle.json @@ -0,0 +1,121 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL P2S 0.6 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_40", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_max_volumetric_speed": [ + "15", + "23", + "23" + ], + "filament_overhang_2_4_speed": [ + "80", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "50", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "50", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..df51c24fd2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL P2S 0.8 nozzle.json @@ -0,0 +1,117 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL P2S 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_41", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "15", + "23" + ], + "filament_overhang_2_4_speed": [ + "80", + "50" + ], + "filament_overhang_3_4_speed": [ + "50", + "30" + ], + "filament_overhang_4_4_speed": [ + "50", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "40" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..31a5b61e21 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C 0.2 nozzle.json @@ -0,0 +1,64 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL X1C 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_42", + "instantiation": "true", + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.8", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C 0.8 nozzle.json new file mode 100644 index 0000000000..23db5e43c6 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C 0.8 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL X1C 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_43", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop": [ + "0.2", + "0.2" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C.json new file mode 100644 index 0000000000..e56d030427 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X1C.json @@ -0,0 +1,76 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL X1C", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_44", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_density": [ + "1.37" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.8", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "255" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.2 nozzle.json new file mode 100644 index 0000000000..0e56e63a37 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.2 nozzle.json @@ -0,0 +1,131 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL X2D 0.2 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_45", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "270", + "250", + "270" + ], + "nozzle_temperature_initial_layer": [ + "245", + "260", + "245", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.4 nozzle.json new file mode 100644 index 0000000000..a95be25e66 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.4 nozzle.json @@ -0,0 +1,143 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL X2D 0.4 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_46", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "13", + "21", + "21", + "13", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "250" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "250", + "250", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "overhang_fan_speed": [ + "50" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..9b9fa384c8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D 0.8 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL X2D 0.8 nozzle", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_47", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "23", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "250" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D.json new file mode 100644 index 0000000000..8e90a43b96 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @BBL X2D.json @@ -0,0 +1,140 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @BBL X2D", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "GFSG03_48", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_density": [ + "1.37" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "15", + "23", + "23", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "250" + ], + "filament_tower_ironing_area": [ + "8" + ], + "filament_wipe": [ + "1", + "nil", + "nil", + "1", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "nil", + "1", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "nil", + "Spiral Lift", + "nil", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "250", + "250", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Matte @base.json b/resources/profiles/BBL/filament/Bambu PETG Matte @base.json new file mode 100644 index 0000000000..e77d26ff44 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Matte @base.json @@ -0,0 +1,81 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFdyfQvU", + "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "13.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "fins_extrude_safe_temp": [ + "71" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "impact_strength_z": [ + "13.6" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.2 nozzle.json index 8bd14c3bd5..198b9a28d5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.2 nozzle.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A1 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_10", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.3" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A1 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_10", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.3" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json index 55abf064e9..3426bf7c8b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1 0.8 nozzle.json @@ -1,36 +1,36 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A1 0.8 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_04", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.2" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A1 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_04", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.2" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json index 8a8eca0950..6e90b91ace 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A1", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_05", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.3" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A1", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_05", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.3" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.2 nozzle.json index eba8d34a37..20b6ea94f3 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.2 nozzle.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A1M 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_09", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.3" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A1M 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_09", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.3" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json index 380eafe49e..30a198a138 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M 0.8 nozzle.json @@ -1,36 +1,36 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_03", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.2" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A1M 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_03", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.2" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json index 745dfc66c1..21a2f05d11 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A1M.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A1M", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_02", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.3" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A1M", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_02", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.3" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json index 5fef31f50e..3fdd0e40e2 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.2 nozzle.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A2L 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_25", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "30" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_overhang_4_4_speed": [ - "30" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.3" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "override_process_overhang_speed": [ - "1" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A2L 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_25", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_overhang_4_4_speed": [ + "30" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.3" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "override_process_overhang_speed": [ + "1" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json index 01a5670ad7..7ea69b881b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.6 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A2L 0.6 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_39", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.2" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A2L 0.6 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_39", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.2" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json index 38e23138e8..047a206bc7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L 0.8 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A2L 0.8 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_26", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.2" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A2L 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_26", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.2" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L.json index a0d99401ce..456fff0650 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL A2L.json @@ -1,35 +1,35 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL A2L", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_27", - "instantiation": "true", - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.3" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL A2L", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_27", + "instantiation": "true", + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.3" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json index f487455df3..8676d31a7e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.2 nozzle.json @@ -1,183 +1,86 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2C 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_24", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2C 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_24", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json index 6223c186b6..9f5c3828de 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.4 nozzle.json @@ -1,183 +1,120 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2C 0.4 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_22", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2C 0.4 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_22", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..75ac270250 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C 0.8 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2C 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_40", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C.json index 8b297c56a0..73e0247e95 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2C.json @@ -1,190 +1,126 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2C", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_23", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2C", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_23", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205", + "205" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json index d00b48c40c..d09cf4c4b0 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.2 nozzle.json @@ -1,131 +1,58 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2D 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_12", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2D 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_12", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json index 66edd30e59..397f3e23d5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.4 nozzle.json @@ -1,131 +1,68 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2D 0.4 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_06", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_06", + "instantiation": "true", + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "nil", + "1" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json index 33da1709c3..0c2c4df008 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.6 nozzle.json @@ -1,138 +1,69 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2D 0.6 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_11", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2D 0.6 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_11", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..66e2bbd006 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2D 0.8 nozzle.json @@ -0,0 +1,80 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2D 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_41", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.2 nozzle.json index cf917140b2..507f540dbb 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,52 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_18", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_18", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.4 nozzle.json index 500a637fe9..86db719213 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.4 nozzle.json @@ -1,131 +1,52 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_16", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_16", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.6 nozzle.json index 058e42275c..236296a6ce 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.6 nozzle.json @@ -1,138 +1,58 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_17", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_17", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..fc0bf555ea --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,76 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_42", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.2 nozzle.json index d30bf8f17d..aa135e98a1 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.2 nozzle.json @@ -1,131 +1,70 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2S 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_28", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2S 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_28", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..0d08cc4211 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.6 nozzle.json @@ -0,0 +1,105 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2S 0.6 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_44", + "instantiation": "true", + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..5b4ba7cfcd --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S 0.8 nozzle.json @@ -0,0 +1,94 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2S 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_45", + "instantiation": "true", + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S.json index 05639f7279..abe1b07138 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL H2S.json @@ -1,133 +1,93 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL H2S", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_08", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL H2S", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_08", + "instantiation": "true", + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.2 nozzle.json index a117aa2b88..af938e3c2b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.2 nozzle.json @@ -1,177 +1,86 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL P2S 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "20" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "50", - "50" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL P2S 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "20" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "filament_retraction_speed": [ + "50", + "50" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.4 nozzle.json index 109cd2c78b..1fb907c675 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.4 nozzle.json @@ -1,168 +1,74 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL P2S 0.4 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_13", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.3", - "0.3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL P2S 0.4 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_13", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.3", + "0.3", + "0.3" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.6 nozzle.json index 0d51292baf..27b5f3a1fd 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.6 nozzle.json @@ -1,175 +1,80 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL P2S 0.6 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_14", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.2", - "0.2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL P2S 0.6 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_14", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.2", + "0.2", + "0.2" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..cfbc2d52a7 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL P2S 0.8 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @BBL P2S 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_43", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.2", + "0.2" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.2 nozzle.json index 26854fbe03..007fe57c4f 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.2 nozzle.json @@ -1,126 +1,57 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL X1C 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_07", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.3", - "0.3" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL X1C 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_07", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.3", + "0.3" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..536a9742dc --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.6 nozzle.json @@ -0,0 +1,63 @@ +{ + "type": "filament", + "name": "Bambu PETG Translucent @BBL X1C 0.6 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_30", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.3", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_z_hop": [ + "nil", + "0.5" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json index 4a996e9d73..3ec40f01c5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C 0.8 nozzle.json @@ -1,137 +1,65 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL X1C 0.8 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_01", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.2", - "0.2" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL X1C 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_01", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.2", + "0.2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json index 5b1f468a06..3103acd859 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X1C.json @@ -1,126 +1,57 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL X1C", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.3", - "0.3" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL X1C", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.3", + "0.3" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json index 5da7bcc5dc..5d5cb6d173 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.2 nozzle.json @@ -1,281 +1,134 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL X2D 0.2 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_21", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "additional_cooling_fan_speed": [ - "20" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250", - "250", - "250" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL X2D 0.2 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_21", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "20" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "3", + "3" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250", + "250" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json index 0d2604da26..974b3528d6 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.4 nozzle.json @@ -1,278 +1,140 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL X2D 0.4 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_19", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "additional_cooling_fan_speed": [ - "10" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250", - "250", - "250" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL X2D 0.4 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "10" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json index dd05df3f9d..4281c834f7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D 0.8 nozzle.json @@ -1,275 +1,110 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL X2D 0.8 nozzle", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_29", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250", - "250", - "250" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @BBL X2D 0.8 nozzle", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_29", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250", + "250" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D.json index 8c65dd98f6..aca3950f6e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @BBL X2D.json @@ -1,275 +1,134 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @BBL X2D", - "inherits": "Bambu PETG Translucent @base", - "from": "system", - "setting_id": "GFSG01_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250", - "250", - "250" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG Translucent @BBL X2D", + "inherits": "Bambu PETG Translucent @base", + "from": "system", + "setting_id": "GFSG01_20", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json index 372c2e5c26..3553e5fc39 100644 --- a/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG Translucent @base.json @@ -1,84 +1,84 @@ { - "type": "filament", - "name": "Bambu PETG Translucent @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFwPrlCM", - "instantiation": "false", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "impact_strength_z": [ - "7.2" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PETG Translucent @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFwPrlCM", + "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "15.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "impact_strength_z": [ + "7.2" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json index 51d9883b07..4ad1c37417 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.4 nozzle.json @@ -1,32 +1,32 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL A1 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL A1 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json index 64face1005..edf85380a3 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1 0.8 nozzle.json @@ -1,33 +1,33 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL A1 0.8 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL A1 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json index bcbf1974e2..4545a6f2a9 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M 0.4 nozzle.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle", - "inherits": "Bambu PETG-CF @BBL A1M", - "from": "system", - "setting_id": "GFSG50_04", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "9" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL A1M 0.4 nozzle", + "inherits": "Bambu PETG-CF @BBL A1M", + "from": "system", + "setting_id": "GFSG50_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "9" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json index 5a237120e3..7852889288 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A1M.json @@ -1,24 +1,24 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL A1M", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL A1M", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json index 6b9e61c9de..2425defd7b 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.4 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL A2L 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_20", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "255" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "0" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL A2L 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_20", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "255" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json index 8c9bd1abc8..ecd9cdfe42 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L 0.8 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL A2L 0.8 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_29", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_flush_temp_fast": [ - "255" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "0" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL A2L 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_29", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_flush_temp_fast": [ + "255" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L.json index 62edee9abe..980c26433e 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL A2L.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL A2L", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_23", - "instantiation": "true", - "fan_min_speed": [ - "20" - ], - "filament_flush_temp_fast": [ - "255" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_speed": [ - "50" - ], - "pre_start_fan_time": [ - "0" - ], - "supertack_plate_temp": [ - "65" - ], - "supertack_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL A2L", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_23", + "instantiation": "true", + "fan_min_speed": [ + "20" + ], + "filament_flush_temp_fast": [ + "255" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_speed": [ + "50" + ], + "pre_start_fan_time": [ + "0" + ], + "supertack_plate_temp": [ + "65" + ], + "supertack_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json index 8b9caf8008..4de1312338 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C 0.4 nozzle.json @@ -1,213 +1,120 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_19", - "instantiation": "true", - "counter_coef_2": [ - "0.0022" - ], - "counter_coef_3": [ - "-0.0178" - ], - "counter_limit_max": [ - "0.036" - ], - "counter_limit_min": [ - "-0.0178" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0014" - ], - "hole_coef_3": [ - "0.11" - ], - "hole_limit_max": [ - "0.11" - ], - "hole_limit_min": [ - "0.075" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_19", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_min": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "hole_limit_max": [ + "0.11" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..f327384244 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C 0.8 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL H2C 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_30", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "55" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C.json index 3320eda7ec..fa1cab99a7 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2C.json @@ -1,214 +1,120 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL H2C", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_18", - "instantiation": "true", - "counter_coef_2": [ - "0.0022" - ], - "counter_coef_3": [ - "-0.0178" - ], - "counter_limit_max": [ - "0.036" - ], - "counter_limit_min": [ - "-0.0178" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0014" - ], - "hole_coef_3": [ - "0.11" - ], - "hole_limit_max": [ - "0.11" - ], - "hole_limit_min": [ - "0.075" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "supertack_plate_temp": [ - "60" - ], - "supertack_plate_temp_initial_layer": [ - "60" - ], - "temperature_vitrification": [ - "55" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL H2C", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_18", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "55" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json index c6bce7e4f6..cf5ed3198f 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.4 nozzle.json @@ -1,155 +1,98 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL H2D 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_08", - "instantiation": "true", - "counter_coef_2": [ - "0.00565" - ], - "counter_coef_3": [ - "-0.0112" - ], - "counter_limit_max": [ - "0.065" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0121" - ], - "hole_coef_3": [ - "0.145" - ], - "hole_limit_min": [ - "0.068" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL H2D 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_08", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "nil", + "0.8" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json index 67c79ab59e..347a56d4bf 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.6 nozzle.json @@ -1,138 +1,93 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL H2D 0.6 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL H2D 0.6 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_07", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..4ae2558fb2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2D 0.8 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL H2D 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_31", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.4 nozzle.json index 186c8f205a..93bb7ca67d 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.4 nozzle.json @@ -1,155 +1,76 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_15", - "instantiation": "true", - "counter_coef_2": [ - "0.00565" - ], - "counter_coef_3": [ - "-0.0112" - ], - "counter_limit_max": [ - "0.065" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0121" - ], - "hole_coef_3": [ - "0.145" - ], - "hole_limit_min": [ - "0.068" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_15", + "instantiation": "true", + "counter_coef_2": [ + "0.00565" + ], + "counter_coef_3": [ + "-0.0112" + ], + "counter_limit_max": [ + "0.065" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.0121" + ], + "hole_coef_3": [ + "0.145" + ], + "hole_limit_min": [ + "0.068" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.6 nozzle.json index 8ac5da7556..62bc309cfa 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.6 nozzle.json @@ -1,138 +1,58 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_14", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_14", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..62b7d54979 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,76 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_32", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..236fa4d02d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S 0.6 nozzle.json @@ -0,0 +1,115 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL H2S 0.6 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_34", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..c9ce999176 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S 0.8 nozzle.json @@ -0,0 +1,108 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL H2S 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_35", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S.json index 7815f24d48..f85e5e820c 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL H2S.json @@ -1,139 +1,103 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL H2S", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_09", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL H2S", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_09", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.4 nozzle.json index a937565714..f7987b06fe 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.4 nozzle.json @@ -1,177 +1,102 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL P2S 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_13", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL P2S 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_13", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_min": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "hole_limit_max": [ + "0.11" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.6 nozzle.json index 0d163230f6..3958df13ad 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.6 nozzle.json @@ -1,178 +1,102 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL P2S 0.6 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_12", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL P2S 0.6 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_12", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..7239839b3d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL P2S 0.8 nozzle.json @@ -0,0 +1,106 @@ +{ + "type": "filament", + "name": "Bambu PETG-CF @BBL P2S 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_33", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json index ab9879c43d..c136712f57 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C 0.4 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL X1C 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL X1C 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "11.5", + "20" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_wipe": [ + "nil", + "1" + ], + "filament_wipe_distance": [ + "nil", + "2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "275" + ], + "nozzle_temperature_initial_layer": [ + "255", + "275" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json index 769e236e4f..e953110fe0 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X1C.json @@ -1,138 +1,73 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL X1C", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL X1C", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "11.5", + "20" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json index 63502e9f99..24b3775fd5 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.4 nozzle.json @@ -1,305 +1,132 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0022" - ], - "counter_coef_3": [ - "-0.0178" - ], - "counter_limit_max": [ - "0.036" - ], - "counter_limit_min": [ - "-0.0178" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5", - "11.5", - "11.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0014" - ], - "hole_coef_3": [ - "0.11" - ], - "hole_limit_max": [ - "0.11" - ], - "hole_limit_min": [ - "0.075" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_17", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5", + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json index b048455936..378ad209c9 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D 0.8 nozzle.json @@ -1,305 +1,140 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL X2D 0.8 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_22", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0022" - ], - "counter_coef_3": [ - "-0.0178" - ], - "counter_limit_max": [ - "0.036" - ], - "counter_limit_min": [ - "-0.0178" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5", - "11.5", - "11.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0014" - ], - "hole_coef_3": [ - "0.11" - ], - "hole_limit_max": [ - "0.11" - ], - "hole_limit_min": [ - "0.075" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL X2D 0.8 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_22", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D.json index 5870af7871..f6e03276e0 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @BBL X2D.json @@ -1,305 +1,164 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL X2D", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0022" - ], - "counter_coef_3": [ - "-0.0178" - ], - "counter_limit_max": [ - "0.036" - ], - "counter_limit_min": [ - "-0.0178" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5", - "11.5", - "11.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0014" - ], - "hole_coef_3": [ - "0.11" - ], - "hole_limit_max": [ - "0.11" - ], - "hole_limit_min": [ - "0.075" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PETG-CF @BBL X2D", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_16", + "instantiation": "true", + "counter_coef_2": [ + "0.0022" + ], + "counter_coef_3": [ + "-0.0178" + ], + "counter_limit_max": [ + "0.036" + ], + "counter_limit_min": [ + "-0.0178" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5", + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0014" + ], + "hole_coef_3": [ + "0.11" + ], + "hole_limit_max": [ + "0.11" + ], + "hole_limit_min": [ + "0.075" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "supertack_plate_temp": [ + "60" + ], + "supertack_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json index 9c1d80768d..7e7f358275 100644 --- a/resources/profiles/BBL/filament/Bambu PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PETG-CF @base.json @@ -1,83 +1,80 @@ { - "type": "filament", - "name": "Bambu PETG-CF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFTRZ8Y4", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "impact_strength_z": [ - "10.7" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "40" - ], - "slow_down_layer_time": [ - "6" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFTRZ8Y4", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "31.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "impact_strength_z": [ + "10.7" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1.json index ab97729a9b..14def75264 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL A1", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_04", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL A1", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_04", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json index a2f8508e47..7d6397aa15 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A1M.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL A1M", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_03", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL A1M", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_03", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json index 92de474c10..8a3db40176 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.6 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_18", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_18", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json index b39e87297d..62f719ddbc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L 0.8 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L.json index e9962474ad..6bd9e86e48 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL A2L.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL A2L", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL A2L", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_13", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json index 580c187b4e..ed720d6732 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C 0.4 nozzle.json @@ -1,183 +1,105 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop": [ + "0", + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C.json index b6072e3359..0d5865af10 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2C.json @@ -1,184 +1,106 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL H2C", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL H2C", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop": [ + "0", + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json index 632181c07f..43a47a4722 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2D.json @@ -1,139 +1,75 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL H2D", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_05", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL H2D", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_05", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2DP.json index 9a356915f8..4f30395743 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2DP.json @@ -1,139 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL H2DP", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL H2DP", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2S.json index 0613ea8a73..3a651c0105 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL H2S.json @@ -1,142 +1,93 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL H2S", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "0", - "0" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL H2S", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL P2S.json index 77fc44385b..f2ea01ad72 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL P2S.json @@ -1,179 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL P2S", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL P2S", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json index 8a351c19c0..9e5ac03bf3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1.json @@ -1,127 +1,54 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL X1", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_00", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL X1", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_00", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json index 8425041516..9fe7a958e1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X1C.json @@ -1,136 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL X1C", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_01", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL X1C", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_01", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "filament_flow_ratio": [ + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json index 75d5e2d631..40f718ed86 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D 0.4 nozzle.json @@ -1,284 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "0.6", - "0.6", - "0.6", - "0.6" - ], - "filament_max_volumetric_speed": [ - "3", - "6", - "6", - "6" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6", + "0.6", + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "3", + "6", + "3", + "6", + "6", + "6" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "nil", + "nil", + "nil", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D.json index d9663b8c24..d3472e210f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @BBL X2D.json @@ -1,285 +1,106 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL X2D", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_10", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "0.6", - "0.6", - "0.6", - "0.6" - ], - "filament_max_volumetric_speed": [ - "3", - "6", - "6", - "6" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL X2D", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6", + "0.6", + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "3", + "6", + "3", + "6", + "6", + "6" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json index b941bed495..8eb1170260 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Aero @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Aero @base.json @@ -1,51 +1,48 @@ { - "type": "filament", - "name": "Bambu PLA Aero @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFBSW57R", - "instantiation": "false", - "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).", - "fan_min_speed": [ - "30" - ], - "filament_cost": [ - "44.99" - ], - "filament_density": [ - "1.21" - ], - "filament_flow_ratio": [ - "0.6" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_type": [ - "PLA-AERO" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_seam_type": [ - "none" - ], - "impact_strength_z": [ - "3.1" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFBSW57R", + "instantiation": "false", + "description": "This filament is only used to print models with a low density usually, and some special parameters are required. To get better printing quality, please refer to this wiki: Instructions for printing RC model with foaming PLA (PLA Aero).", + "fan_min_speed": [ + "30" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "0.6" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PLA-AERO" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "3.1" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json index 860a9f92c0..c3498b9c96 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json index 438869b04e..eb8c3297f8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A1", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A1", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json index 08c8eebd9c..704542fa89 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json index 871e60e85c..c353bff9ac 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A1M.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A1M", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A1M", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json index c82796d415..2df44cca2d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.2 nozzle.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json index f7b52810e6..0be9255970 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.4 nozzle.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A2L 0.4 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A2L 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "23" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json index 880f94a58c..1d40774b1b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.6 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_50", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_50", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json index bafc3729fc..3075bac717 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL A2L 0.8 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_51", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_51", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json index 2f1ab7ef04..07ee98f7e6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.2 nozzle.json @@ -1,213 +1,124 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_23", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.0025" - ], - "counter_coef_3": [ - "0.014" - ], - "counter_limit_max": [ - "0.076" - ], - "counter_limit_min": [ - "0.014" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.12" - ], - "hole_limit_max": [ - "0.12" - ], - "hole_limit_min": [ - "0.05" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_23", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json index 39bc94d00a..63a6a766b0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.6 nozzle.json @@ -1,213 +1,155 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2C 0.6 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_31", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.0025" - ], - "counter_coef_3": [ - "0.014" - ], - "counter_limit_max": [ - "0.076" - ], - "counter_limit_min": [ - "0.014" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.12" - ], - "hole_limit_max": [ - "0.12" - ], - "hole_limit_min": [ - "0.05" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL H2C 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_31", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json index 402f3cddd0..a8f668860c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C 0.8 nozzle.json @@ -1,213 +1,140 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2C 0.8 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_32", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.0025" - ], - "counter_coef_3": [ - "0.014" - ], - "counter_limit_max": [ - "0.076" - ], - "counter_limit_min": [ - "0.014" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.12" - ], - "hole_limit_max": [ - "0.12" - ], - "hole_limit_min": [ - "0.05" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_32", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C.json index 1e6c1643eb..fb7e781c55 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2C.json @@ -1,213 +1,155 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2C", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_22", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.0025" - ], - "counter_coef_3": [ - "0.014" - ], - "counter_limit_max": [ - "0.076" - ], - "counter_limit_min": [ - "0.014" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.8" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.12" - ], - "hole_limit_max": [ - "0.12" - ], - "hole_limit_min": [ - "0.05" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL H2C", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_22", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.8", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json index 44b42d7c71..53dfefb6b8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.2 nozzle.json @@ -1,143 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_13", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.6 nozzle.json index 15420e0dba..b201c04ae8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.6 nozzle.json @@ -1,159 +1,126 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2D 0.6 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_27", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_id": [ - "1", - "1" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_27", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json index f941c59ada..155afbbc68 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D 0.8 nozzle.json @@ -1,143 +1,115 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json index 9717bc1843..0cb3530b9c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2D.json @@ -1,155 +1,126 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2D", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2D", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "25" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "1" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.2 nozzle.json index cf46f6077e..9c49c6d367 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.2 nozzle.json @@ -1,143 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_18", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_18", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.6 nozzle.json index a581d77531..2efcf62609 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.6 nozzle.json @@ -1,155 +1,100 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_28", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_28", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.8 nozzle.json index 9abe36c35d..ded3b4e3d9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP 0.8 nozzle.json @@ -1,143 +1,88 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP.json index 85660b9ad0..6df1b590b0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2DP.json @@ -1,155 +1,100 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2DP", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL H2DP", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_17", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.2 nozzle.json index b2e85e89b3..a26fae8231 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.2 nozzle.json @@ -1,140 +1,108 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.6 nozzle.json index 4ba61fe097..5e8717b0fc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.6 nozzle.json @@ -1,143 +1,136 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2S 0.6 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_30", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_30", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.8 nozzle.json index 4d9e200ce2..fcfed64523 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S 0.8 nozzle.json @@ -1,143 +1,123 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2S 0.8 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_29", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S.json index 78ba481815..2b26b5a33b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL H2S.json @@ -1,140 +1,133 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL H2S", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_05", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL H2S", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_05", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..9b647c0605 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P1S 0.4 nozzle.json @@ -0,0 +1,73 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_34", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P1S 0.6 nozzle.json new file mode 100644 index 0000000000..fb9f4a9816 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P1S 0.6 nozzle.json @@ -0,0 +1,73 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL P1S 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_35", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.2 nozzle.json index e1a2432769..cec82f1394 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.2 nozzle.json @@ -1,171 +1,104 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_15", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.6 nozzle.json index 79a6dc18ec..093ad31bcd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.6 nozzle.json @@ -1,171 +1,121 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_26", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_26", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "40", + "21" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.8 nozzle.json index 8826267425..1d462e3afe 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S 0.8 nozzle.json @@ -1,171 +1,112 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_16", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S.json index 199c5311c6..6d36f1d3f7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL P2S.json @@ -1,171 +1,106 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL P2S", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_11", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL P2S", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_11", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_min": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "40", + "21" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "hole_limit_max": [ + "0.12" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json index 50a09c0b3d..ff5dabd8bd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL X1", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA04", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL X1", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json index 6ae9993dab..562e34ec84 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..da5b604de1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.6 nozzle.json @@ -0,0 +1,73 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_33", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json index 567fa2a16b..0b8ad7bb27 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C 0.8 nozzle.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json index da7167b84c..ddfe8cd5d9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X1C.json @@ -1,127 +1,67 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL X1C", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL X1C", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json index 872033281b..7745d8f761 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.2 nozzle.json @@ -1,299 +1,158 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0025" - ], - "counter_coef_3": [ - "0.014" - ], - "counter_limit_max": [ - "0.076" - ], - "counter_limit_min": [ - "0.014" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.12" - ], - "hole_limit_max": [ - "0.12" - ], - "hole_limit_min": [ - "0.05" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_20", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json index fec7aeb1e5..6ce14a3d78 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.4 nozzle.json @@ -1,296 +1,163 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_08", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0025" - ], - "counter_coef_3": [ - "0.014" - ], - "counter_limit_max": [ - "0.076" - ], - "counter_limit_min": [ - "0.014" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "40", - "21", - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.12" - ], - "hole_limit_max": [ - "0.12" - ], - "hole_limit_min": [ - "0.05" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Basic @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_08", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "40", + "21", + "21", + "30", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.6 nozzle.json new file mode 100644 index 0000000000..080c549be8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.6 nozzle.json @@ -0,0 +1,164 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL X2D 0.6 nozzle", + "renamed_from": "Bambu PLA Basic @BBL X2D", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_09", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "40", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..0d8be7315e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D 0.8 nozzle.json @@ -0,0 +1,155 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_55", + "instantiation": "true", + "counter_coef_2": [ + "0.0025" + ], + "counter_coef_3": [ + "0.014" + ], + "counter_limit_max": [ + "0.076" + ], + "counter_limit_min": [ + "0.014" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "21", + "40", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.12" + ], + "hole_limit_max": [ + "0.12" + ], + "hole_limit_min": [ + "0.05" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D.json deleted file mode 100644 index 7c9963249a..0000000000 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @BBL X2D.json +++ /dev/null @@ -1,297 +0,0 @@ -{ - "type": "filament", - "name": "Bambu PLA Basic @BBL X2D", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0025" - ], - "counter_coef_3": [ - "0.014" - ], - "counter_limit_max": [ - "0.076" - ], - "counter_limit_min": [ - "0.014" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "40", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.12" - ], - "hole_limit_max": [ - "0.12" - ], - "hole_limit_min": [ - "0.05" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} diff --git a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json index 6d25d0ece0..3a3f68a157 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Basic @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Basic @base.json @@ -1,48 +1,38 @@ { - "type": "filament", - "name": "Bambu PLA Basic @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFoiVqVM", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.26" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "10%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "filament_change_length": [ - "5" - ], - "filament_prime_volume": [ - "30" - ], - "impact_strength_z": [ - "13.8" - ], - "compatible_printers": [], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFoiVqVM", + "instantiation": "false", + "filament_change_length": [ + "5" + ], + "filament_cost": [ + "15.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_prime_volume": [ + "30" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "13.8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1 0.2 nozzle.json index 17373d31d6..576ebf073d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1.json index 9ac7dbb2a1..ae738f0ba2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A1", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A1", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json index 7540d6b075..32aecc1f97 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M.json index da0ddaa688..ab90c081c8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A1M.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A1M", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A1M", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json index 4b224de8c0..fa3bf8b447 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.2 nozzle.json @@ -1,53 +1,53 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_26", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_26", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json index 4d5e335fef..4b1e0366d7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.6 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_39", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_39", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json index db108940ed..3884c8766b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L 0.8 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_40", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_40", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L.json index 7755b48018..4a493cb8cf 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL A2L.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL A2L", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_27", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL A2L", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_27", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json index a12fc3a6a5..31708faa3f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.2 nozzle.json @@ -1,186 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_25", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_25", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json index f8209c2c99..203111f93d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C 0.4 nozzle.json @@ -1,186 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_23", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_23", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C.json index 4fadfcf5ba..d6ae035131 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2C.json @@ -1,187 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2C", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_24", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2C", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_24", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json index ad4a7ca427..94e60d2b28 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.2 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json index 549d8c70b7..73f707ce8f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D 0.8 nozzle.json @@ -1,134 +1,85 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json index b034a222d0..a55cfd5a4b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2D.json @@ -1,135 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2D", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2D", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.2 nozzle.json index dda21c0f10..bff31010ae 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.8 nozzle.json index 7f73e2caea..cf17ea5af0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP 0.8 nozzle.json @@ -1,134 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_19", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP.json index 0b8f861fce..32df6b69fd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2DP.json @@ -1,135 +1,80 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2DP", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_17", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2DP", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S 0.2 nozzle.json index 34e3593313..2e4df09afb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S 0.2 nozzle.json @@ -1,140 +1,87 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S.json index 43924594d4..6bd6a008d5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL H2S.json @@ -1,142 +1,114 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL H2S", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL H2S", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P 0.2 nozzle.json index 097b10358d..92b19310cb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..6f4d0fdbdc --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P 0.6 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PLA Dynamic @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_31", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P.json index 42178239a9..8dd853022d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P1P.json @@ -1,142 +1,84 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL P1P", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL P1P", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.2 nozzle.json index 7e14fddd41..518fe6e7fe 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.2 nozzle.json @@ -1,171 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.8 nozzle.json index 898144cda5..1abdfa6de7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S 0.8 nozzle.json @@ -1,171 +1,68 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S.json index fe8fcda52c..bd304790b6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL P2S.json @@ -1,172 +1,78 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL P2S", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL P2S", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.2 nozzle.json index 073a22e994..8cfe61e78c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.2 nozzle.json @@ -1,125 +1,52 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..98eb99862f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.6 nozzle.json @@ -0,0 +1,66 @@ +{ + "type": "filament", + "name": "Bambu PLA Dynamic @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_28", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.8 nozzle.json index 70e423ff23..2a16080567 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C 0.8 nozzle.json @@ -1,125 +1,52 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C.json index ae5aa03881..d6137cff59 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X1C.json @@ -1,129 +1,70 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL X1C", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL X1C", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json index 57e56acc27..436ec93e94 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.2 nozzle.json @@ -1,275 +1,92 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_22", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "2", - "2" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_22", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json index 5e22e07c12..18f6abcda7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D 0.4 nozzle.json @@ -1,272 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_20", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D.json index 5a9f3939d1..c632d75d48 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @BBL X2D.json @@ -1,273 +1,132 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @BBL X2D", - "inherits": "Bambu PLA Dynamic @base", - "from": "system", - "setting_id": "GFSA13_21", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @BBL X2D", + "inherits": "Bambu PLA Dynamic @base", + "from": "system", + "setting_id": "GFSA13_21", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json b/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json index b21b156082..12a51695d8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Dynamic @base.json @@ -1,23 +1,23 @@ { - "type": "filament", - "name": "Bambu PLA Dynamic @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFDGigEI", - "instantiation": "false", - "filament_cost": [ - "31.99" - ], - "filament_density": [ - "1.26" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "20.8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Dynamic @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFDGigEI", + "instantiation": "false", + "filament_cost": [ + "31.99" + ], + "filament_density": [ + "1.26" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "20.8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json index 34af54c59d..19c1fd43af 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json index 3ca1876828..75fc1db5ee 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A1", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A1", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json index 865161413b..d011a0b4bf 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json index 48cbcfc541..e4a749d675 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A1M.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A1M", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A1M", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json index 0e8d20c597..43add8445c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.2 nozzle.json @@ -1,71 +1,71 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_26", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_overhang_4_4_speed": [ - "35" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_26", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_overhang_4_4_speed": [ + "35" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json index 76e3315dc2..d74bfea08a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.6 nozzle.json @@ -1,59 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_39", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_39", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json index 971d39bb47..3cc6a7ebd8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L 0.8 nozzle.json @@ -1,59 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_40", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_40", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L.json index a29da01908..f73a831eb4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL A2L.json @@ -1,59 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL A2L", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_27", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL A2L", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_27", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json index fe15dcefb2..d7d9738881 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.2 nozzle.json @@ -1,186 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_25", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_25", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json index 76b79659ed..5fdb9b941f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C 0.4 nozzle.json @@ -1,186 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_23", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_23", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C.json index 59ec370472..3c4a3181fd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2C.json @@ -1,187 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2C", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_24", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2C", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_24", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json index a681eb11e5..5594ddd436 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.2 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json index 3fa5d9c823..b6f6057712 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D 0.8 nozzle.json @@ -1,134 +1,85 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json index b026cdd803..742304d148 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2D.json @@ -1,135 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2D", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2D", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.2 nozzle.json index 6b030eb631..d3db19b02b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.8 nozzle.json index ba876fce99..19f76bd953 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP 0.8 nozzle.json @@ -1,134 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_19", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP.json index e16f9732fb..e4f3c42060 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2DP.json @@ -1,135 +1,80 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2DP", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_17", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2DP", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S 0.2 nozzle.json index ea970f53ce..c9beecd89c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S 0.2 nozzle.json @@ -1,143 +1,90 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S.json index efc03eac1b..91d24f8332 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL H2S.json @@ -1,145 +1,117 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL H2S", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL H2S", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json index cc0886295d..7aa84eccd3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..b5d4190792 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P 0.6 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu PLA Galaxy @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_31", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json index 36814597d0..2c0bd7a5fe 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P1P.json @@ -1,142 +1,92 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL P1P", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL P1P", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.2 nozzle.json index 77febb1f11..049e3ad804 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.2 nozzle.json @@ -1,177 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.8 nozzle.json index f5bd3fc62b..bc138e1df2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S 0.8 nozzle.json @@ -1,171 +1,76 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S.json index 967a1e89ea..52fe7324be 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL P2S.json @@ -1,175 +1,86 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL P2S", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL P2S", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json index 750134520f..3332e1c8c8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..753b8c25b8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.6 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PLA Galaxy @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_28", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json index 323c3bb7de..89ecc60c27 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C 0.8 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_02", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json index 99c0479f7e..19e30e5fb0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X1C.json @@ -1,129 +1,78 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL X1C", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL X1C", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json index 8b154c0518..2a2a610ca9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.2 nozzle.json @@ -1,275 +1,134 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_22", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_22", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json index 0d4ed1815e..692021b2fc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D 0.4 nozzle.json @@ -1,272 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_20", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D.json index 50cd6aa79b..714741368f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @BBL X2D.json @@ -1,273 +1,140 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @BBL X2D", - "inherits": "Bambu PLA Galaxy @base", - "from": "system", - "setting_id": "GFSA15_21", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @BBL X2D", + "inherits": "Bambu PLA Galaxy @base", + "from": "system", + "setting_id": "GFSA15_21", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json b/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json index baeb6a1ab8..b26152dd2a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Galaxy @base.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu PLA Galaxy @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFQ3e56w", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.19" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "5.8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Galaxy @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFQ3e56w", + "instantiation": "false", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.19" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "5.8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json index 2de9cd5931..8763639cdd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json index a95509758b..4fa331e1b9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL A1", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL A1", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json index dc0dd63d0f..c0e753700a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_17", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_17", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M.json index 750fd2b9de..898241b43e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A1M.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL A1M", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_16", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL A1M", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_16", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json index decfd9b658..30222be57c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.4 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL A2L 0.4 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_27", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL A2L 0.4 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_27", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json index c980532cd1..01fed6905c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.6 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_38", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_38", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json index cedfcdf86c..57d8ea3bab 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL A2L 0.8 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_39", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_39", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json index 8558adc1ee..f0601b5374 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C 0.4 nozzle.json @@ -1,186 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_23", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_23", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C.json index 20c231beff..7130e8e127 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2C.json @@ -1,187 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL H2C", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_24", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL H2C", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_24", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json index c9ed5e4e72..f79d057d10 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2D.json @@ -1,136 +1,98 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL H2D", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL H2D", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json index 896ec8c7c8..0faa39a293 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_19", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP.json index 52f111fc26..f8edcb3f46 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2DP.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL H2DP", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL H2DP", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2S 0.2 nozzle.json deleted file mode 100644 index 24009ae53e..0000000000 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2S 0.2 nozzle.json +++ /dev/null @@ -1,143 +0,0 @@ -{ - "type": "filament", - "name": "Bambu PLA Glow @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2S.json index 85445c0e64..4530262350 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL H2S.json @@ -1,145 +1,118 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL H2S", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL H2S", + "renamed_from": "Bambu PLA Glow @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P 0.2 nozzle.json index 64a05d2e66..34d9c80622 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P 0.2 nozzle.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Glow @BBL P1P", - "from": "system", - "setting_id": "GFSA12_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Glow @BBL P1P", + "from": "system", + "setting_id": "GFSA12_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..930f3a2160 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P 0.6 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu PLA Glow @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_33", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json index 82d3513632..0d37c339c1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P1P.json @@ -1,142 +1,92 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL P1P", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL P1P", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json index 531cd9cb1e..1ac8c17a57 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.2 nozzle.json @@ -1,174 +1,83 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.6 nozzle.json index 4597af5b89..588e83309f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.6 nozzle.json @@ -1,174 +1,105 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_28", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.6", - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "0", - "0" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_28", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.6", + "0.6", + "0.6" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "0", + "0", + "0" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.8 nozzle.json index f843fc6c95..4eb1100b6b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S 0.8 nozzle.json @@ -1,171 +1,88 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_29", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_29", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S.json index 833d53771c..43a636a896 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL P2S.json @@ -1,174 +1,85 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL P2S", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL P2S", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1 0.2 nozzle.json index de724b771e..553b1ef680 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1 0.2 nozzle.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X1 0.2 nozzle", - "inherits": "Bambu PLA Glow @BBL X1", - "from": "system", - "setting_id": "GFSA12_09", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "compatible_printers": [ - "Bambu Lab X1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X1 0.2 nozzle", + "inherits": "Bambu PLA Glow @BBL X1", + "from": "system", + "setting_id": "GFSA12_09", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json index 247fc5c97e..16013c4055 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X1", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_08", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X1", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_08", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C 0.2 nozzle.json index 86fdf20128..c78067c23a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C 0.2 nozzle.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Glow @BBL X1C", - "from": "system", - "setting_id": "GFSA12_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Glow @BBL X1C", + "from": "system", + "setting_id": "GFSA12_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..821066a1f4 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C 0.6 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PLA Glow @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_30", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json index bd1fd2232e..68493f889e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1C.json @@ -1,127 +1,76 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X1C", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X1C", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E 0.2 nozzle.json index ea7cbdd476..85b566349a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E 0.2 nozzle.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X1E 0.2 nozzle", - "inherits": "Bambu PLA Glow @BBL X1E", - "from": "system", - "setting_id": "GFSA12_05", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X1E 0.2 nozzle", + "inherits": "Bambu PLA Glow @BBL X1E", + "from": "system", + "setting_id": "GFSA12_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json index 6aca99dc3b..f86d91bf11 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X1E.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X1E", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_04", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X1E", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json index 4ae6b67df7..f67c1b406b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.2 nozzle.json @@ -1,64 +1,137 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Glow @BBL X1C", - "from": "system", - "setting_id": "GFSA12_22", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_printable": [ - "0" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "retraction_distances_when_ec": [ - "3", - "3" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_22", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_printable": [ + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "nil", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json index 826f5db868..cd89ac6bbc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D 0.4 nozzle.json @@ -1,272 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_20", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D.json index 2f4bad282c..f5e3247ead 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @BBL X2D.json @@ -1,273 +1,140 @@ { - "type": "filament", - "name": "Bambu PLA Glow @BBL X2D", - "inherits": "Bambu PLA Glow @base", - "from": "system", - "setting_id": "GFSA12_21", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @BBL X2D", + "inherits": "Bambu PLA Glow @base", + "from": "system", + "setting_id": "GFSA12_21", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Glow @base.json b/resources/profiles/BBL/filament/Bambu PLA Glow @base.json index 7556361f81..8226894db3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Glow @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Glow @base.json @@ -1,32 +1,32 @@ { - "type": "filament", - "name": "Bambu PLA Glow @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFEkPBwx", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.26" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "19.8" - ], - "temperature_vitrification": [ - "45" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Glow @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFEkPBwx", + "instantiation": "false", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "19.8" + ], + "required_nozzle_HRC": [ + "40" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1 0.2 nozzle.json index 256a62a56d..59f6662ccd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1 0.2 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json index f3d08f5ab3..5c01a99100 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1.json @@ -1,49 +1,49 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A1", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A1", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json index b91ec4a8b8..0648aac9d2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M 0.2 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json index 4161408b26..1f8c8c5f22 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A1M.json @@ -1,49 +1,49 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A1M", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A1M", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json index be2d2d0309..79d0231180 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.2 nozzle.json @@ -1,77 +1,77 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_21", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_overhang_4_4_speed": [ - "35" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_21", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_overhang_4_4_speed": [ + "35" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json index 6e4d34f6f6..a72f2aecac 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.4 nozzle.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A2L 0.4 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_22", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A2L 0.4 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_22", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json index 91d868c8d0..8bd86cc2f0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.6 nozzle.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_39", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_39", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json index 390387cce7..b09c45cf36 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL A2L 0.8 nozzle.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_40", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_40", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json index bef804d79e..938f70ef5f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.2 nozzle.json @@ -1,198 +1,109 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_17", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json index 45a9cba268..a435869e4d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.4 nozzle.json @@ -1,213 +1,155 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "1.01", - "1.01" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_retraction_length": [ - "0.4", - "0.8" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0081" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_min": [ + "-0.4" + ], + "counter_limit_max": [ + "0.05" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "1.01", + "1.01", + "1.01" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_retraction_length": [ + "0.4", + "0.8", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0081" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..b10f90036d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C 0.8 nozzle.json @@ -0,0 +1,152 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_44", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1.01", + "1.01" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0081" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C.json index 5c1d65e758..a30e801edd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2C.json @@ -1,214 +1,155 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2C", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_16", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "1.01", - "1.01" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0081" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL H2C", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_16", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "1.01", + "1.01", + "1.01" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0081" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json index 8ba8d5847c..fcd3c66c1c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.2 nozzle.json @@ -1,149 +1,84 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..fbb2fb9994 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.6 nozzle.json @@ -0,0 +1,143 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_45", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json index 6d6cb1db6d..fb7b165418 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D 0.8 nozzle.json @@ -1,149 +1,115 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0081" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json index ed89da9c6e..f7bcb1ad8f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2D.json @@ -1,165 +1,126 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2D", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL H2D", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "1" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.2 nozzle.json index 51079b5a89..3844c578ee 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.2 nozzle.json @@ -1,149 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_30", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_30", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.4 nozzle.json index 06adfb14d1..e2aea610ee 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.4 nozzle.json @@ -1,164 +1,109 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_27", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_27", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.6 nozzle.json index 62ac9cfbae..758129964a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.6 nozzle.json @@ -1,164 +1,109 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_28", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_28", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.8 nozzle.json index cd59790f33..924d3416d2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2DP 0.8 nozzle.json @@ -1,149 +1,94 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_29", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.2 nozzle.json index f2417539a7..c28b9c1e67 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.2 nozzle.json @@ -1,140 +1,87 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..e1580f9a56 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.6 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_46", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..a1435c6c6f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S 0.8 nozzle.json @@ -0,0 +1,111 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_47", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S.json index ff2794f1af..da3587b191 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL H2S.json @@ -1,142 +1,112 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL H2S", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_18", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "20", - "30" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL H2S", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_18", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "20", + "30", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P 0.2 nozzle.json index e935a0de91..897af5a38f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..a270dea0ab --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P 0.6 nozzle.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_34", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json index 17c8cb629e..e7a9400504 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P1P.json @@ -1,142 +1,96 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL P1P", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL P1P", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.2 nozzle.json index 6a04db26bd..9fa4716211 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.2 nozzle.json @@ -1,168 +1,77 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.4 nozzle.json index c4db23999b..b7173ec6fd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.4 nozzle.json @@ -1,168 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL P2S 0.4 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL P2S 0.4 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1.01", + "0.98", + "1.01" + ], + "filament_max_volumetric_speed": [ + "16", + "40", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "18", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.6 nozzle.json index e8437c376c..93276abfa2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.6 nozzle.json @@ -1,168 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "40", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.8 nozzle.json index 9738cd919e..3e7034724b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL P2S 0.8 nozzle.json @@ -1,168 +1,85 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_26", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_26", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.2 nozzle.json index 8730cd4c0b..dadf938879 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..0ba97e92b1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.6 nozzle.json @@ -0,0 +1,78 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_31", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json index e8e60c657c..cc8e3aafd8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C 0.8 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_02", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json index 6dcacd02a0..00ece6ec72 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X1C.json @@ -1,129 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL X1C", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL X1C", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json index 31210a2d44..fa3cbb9c55 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.2 nozzle.json @@ -1,275 +1,134 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json index c2ff288751..53dc610c25 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.4 nozzle.json @@ -1,272 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_12", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1.029", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "40", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1.029", + "0.98", + "1.029", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "40", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..33ca9178ff --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D 0.8 nozzle.json @@ -0,0 +1,131 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_48", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "16", + "40", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D.json index fb392361e4..82f5fb2a27 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @BBL X2D.json @@ -1,273 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Lite @BBL X2D", - "inherits": "Bambu PLA Lite @base", - "from": "system", - "setting_id": "GFSA18_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "40", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Lite @BBL X2D", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "GFSA18_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "40", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Lite @base.json b/resources/profiles/BBL/filament/Bambu PLA Lite @base.json index 4a21717d9e..1a74521338 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Lite @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Lite @base.json @@ -1,44 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Lite @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFnfxTvi", - "instantiation": "false", - "filament_cost": [ - "0" - ], - "filament_density": [ - "1.40" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "6.6" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Lite @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFnfxTvi", + "instantiation": "false", + "filament_cost": [ + "18.99" + ], + "filament_density": [ + "1.40" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "6.6" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json index b752b8a869..1452831345 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL A1", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL A1", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json index 83ceb3a359..c53cde99c5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A1M.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL A1M", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL A1M", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json index 594122a3e3..1015ec00c0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.6 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json index 4aca94fe0d..2843aa8280 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L 0.8 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L.json index cf3b42820c..b2983ef119 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL A2L.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL A2L", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL A2L", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json index ef426cb255..1cdc32a534 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C 0.4 nozzle.json @@ -1,186 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C.json index 4055a4021e..6840297c89 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2C.json @@ -1,187 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL H2C", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL H2C", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json index 8bdb5beb00..47f56786ac 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2D.json @@ -1,136 +1,98 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL H2D", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL H2D", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2DP.json index a1ee864da0..a12b15a930 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2DP.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL H2DP", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL H2DP", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2S.json index 51db0ee82d..077bbab752 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL H2S.json @@ -1,145 +1,117 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL H2S", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL H2S", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S 0.8 nozzle.json index f313c05331..61be85f4aa 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S 0.8 nozzle.json @@ -1,174 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S.json index 09dfb9ecbf..28071dfd7c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL P2S.json @@ -1,175 +1,86 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL P2S", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL P2S", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json index 4dba8032bc..1bffa6b66b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL X1", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL X1", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..2c55f8c681 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C 0.6 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PLA Marble @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_15", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json index f07ebe22e1..681a71eade 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X1C.json @@ -1,130 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL X1C", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL X1C", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json index 1a285d0cca..e8004a8a96 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D 0.4 nozzle.json @@ -1,272 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_08", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D.json index e1f7f6f18b..1caa8e0ec0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @BBL X2D.json @@ -1,273 +1,140 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL X2D", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL X2D", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json index 4c9ecb2ff5..6669b42d96 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Marble @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Marble @base.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Bambu PLA Marble @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF9OlTWH", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.22" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "6.5" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OF9OlTWH", + "instantiation": "false", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "6.5" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json index cf043fc050..243fdbface 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json index 5a47157b33..4a06b0cfcc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1.json @@ -1,49 +1,49 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A1", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A1", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json index 41532d323e..ae8731e6c4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json index acd4791ec4..157576d182 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A1M.json @@ -1,49 +1,49 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A1M", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A1M", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json index 3434f4e252..7965c9dd02 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.2 nozzle.json @@ -1,71 +1,71 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_overhang_4_4_speed": [ - "35" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_overhang_4_4_speed": [ + "35" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json index d9f4a5e0c5..db067ed80f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.4 nozzle.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A2L 0.4 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "24" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A2L 0.4 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json index 3e4bec2ae7..4a5a1095fc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.6 nozzle.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_44", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "1" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_44", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "1" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json index a68950ebb2..6517427208 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL A2L 0.8 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_45", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_45", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json index cf9b4b85ce..8b970d07f2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.2 nozzle.json @@ -1,213 +1,124 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_23", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.0066" - ], - "counter_limit_max": [ - "0.082" - ], - "counter_limit_min": [ - "0.0066" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0026" - ], - "hole_coef_3": [ - "0.1116" - ], - "hole_limit_max": [ - "0.1116" - ], - "hole_limit_min": [ - "0.046" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_23", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json index b613b0aea6..7ff6555cec 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.6 nozzle.json @@ -1,213 +1,155 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2C 0.6 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_31", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.0066" - ], - "counter_limit_max": [ - "0.082" - ], - "counter_limit_min": [ - "0.0066" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0026" - ], - "hole_coef_3": [ - "0.1116" - ], - "hole_limit_max": [ - "0.1116" - ], - "hole_limit_min": [ - "0.046" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL H2C 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_31", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json index 0e60307815..9bcd43edb4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C 0.8 nozzle.json @@ -1,213 +1,140 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2C 0.8 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_32", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.0066" - ], - "counter_limit_max": [ - "0.082" - ], - "counter_limit_min": [ - "0.0066" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0026" - ], - "hole_coef_3": [ - "0.1116" - ], - "hole_limit_max": [ - "0.1116" - ], - "hole_limit_min": [ - "0.046" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_32", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C.json index 58464d719b..06643057f8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2C.json @@ -1,213 +1,155 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2C", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_22", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.0066" - ], - "counter_limit_max": [ - "0.082" - ], - "counter_limit_min": [ - "0.0066" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.8" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0026" - ], - "hole_coef_3": [ - "0.1116" - ], - "hole_limit_max": [ - "0.1116" - ], - "hole_limit_min": [ - "0.046" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL H2C", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_22", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "25" + ], + "filament_retraction_length": [ + "0.4", + "0.8", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json index 78bd6ad0a1..b190108aed 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.2 nozzle.json @@ -1,143 +1,102 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_13", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.6 nozzle.json index 783b7d04a0..be51abe9d3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.6 nozzle.json @@ -1,165 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2D 0.6 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_27", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_id": [ - "1", - "1" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_27", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json index 03ed06c5f3..3ada24f209 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D 0.8 nozzle.json @@ -1,143 +1,118 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json index 327ca4982f..2a0b55932e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2D.json @@ -1,161 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2D", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_05", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2D", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_05", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "31" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "1" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.2 nozzle.json index bcabadcc3c..f69cf85eca 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.2 nozzle.json @@ -1,143 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_18", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_18", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.6 nozzle.json index 0eaeecced3..477bf3492a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.6 nozzle.json @@ -1,161 +1,106 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_28", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_28", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.8 nozzle.json index 3592ee9216..85a1fbcf4f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP 0.8 nozzle.json @@ -1,143 +1,88 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP.json index a12465e381..08a123c6c4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2DP.json @@ -1,161 +1,106 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2DP", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.06" - ], - "counter_coef_3": [ - "-0.32" - ], - "counter_limit_min": [ - "-0.4" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "35" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL H2DP", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_17", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.06" + ], + "counter_coef_3": [ + "-0.32" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.4" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "35" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.2 nozzle.json index de41437dde..eeea4e7a78 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.2 nozzle.json @@ -1,137 +1,108 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.6 nozzle.json index 6cf6262e97..6c611715da 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.6 nozzle.json @@ -1,140 +1,136 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2S 0.6 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_30", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_30", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40", + "30" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.8 nozzle.json index d71ddd97b0..0c38e3d228 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S 0.8 nozzle.json @@ -1,140 +1,123 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2S 0.8 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_29", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "30", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "30", + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S.json index d1a2406f98..f794e7e0f5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL H2S.json @@ -1,137 +1,133 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL H2S", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "25", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL H2S", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "25", + "40", + "25" + ], + "filament_prime_volume": [ + "30" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..9065c06e4c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P1S 0.4 nozzle.json @@ -0,0 +1,73 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_34", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P1S 0.6 nozzle.json new file mode 100644 index 0000000000..df45e15bfb --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P1S 0.6 nozzle.json @@ -0,0 +1,73 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @BBL P1S 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_35", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.2 nozzle.json index 864fd08701..7af0bca0ae 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.2 nozzle.json @@ -1,174 +1,119 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "0", - "0" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "0", + "0" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.6 nozzle.json index a8dfd5c044..8845412d00 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.6 nozzle.json @@ -1,174 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_26", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "22", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_26", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "40", + "22" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.8 nozzle.json index d0f2aad651..369c15e2cd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S 0.8 nozzle.json @@ -1,174 +1,115 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_16", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "22", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_16", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S.json index 47c29030b0..85051a2210 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL P2S.json @@ -1,174 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL P2S", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "22", - "40" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "0", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL P2S", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_min": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1.01", + "0.98", + "1.01" + ], + "filament_max_volumetric_speed": [ + "22", + "40", + "22" + ], + "filament_retraction_distances_when_cut": [ + "0", + "10", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "hole_limit_max": [ + "0.1116" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json index 71d6c01418..0f652bab76 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1.json @@ -1,127 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL X1", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA05", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL X1", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA05", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json index 8ff99d2c90..053b788985 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..737b16ff2a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_33", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.6" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json index c9611be68c..6e90773f8f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C 0.8 nozzle.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json index f24ab7836c..09eeed982a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X1C.json @@ -1,127 +1,75 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL X1C", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL X1C", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json index b34707d2fe..229a26caff 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.2 nozzle.json @@ -1,299 +1,158 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.0066" - ], - "counter_limit_max": [ - "0.082" - ], - "counter_limit_min": [ - "0.0066" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0026" - ], - "hole_coef_3": [ - "0.1116" - ], - "hole_limit_max": [ - "0.1116" - ], - "hole_limit_min": [ - "0.046" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_20", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json index a598fe2ee9..ad344cf7c7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.4 nozzle.json @@ -1,296 +1,163 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.0066" - ], - "counter_limit_max": [ - "0.082" - ], - "counter_limit_min": [ - "0.0066" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1.006", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "22", - "40", - "22", - "25" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0026" - ], - "hole_coef_3": [ - "0.1116" - ], - "hole_limit_max": [ - "0.1116" - ], - "hole_limit_min": [ - "0.046" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_09", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1.006", + "0.98", + "1.006", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "40", + "22", + "22", + "25", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..9b7b3d49e5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D 0.8 nozzle.json @@ -0,0 +1,155 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_49", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "22", + "40", + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D.json index 727ba0f6aa..9f1f6b7dbe 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @BBL X2D.json @@ -1,297 +1,163 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL X2D", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_11", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.0066" - ], - "counter_limit_max": [ - "0.082" - ], - "counter_limit_min": [ - "0.0066" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "22", - "40", - "22", - "22" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0026" - ], - "hole_coef_3": [ - "0.1116" - ], - "hole_limit_max": [ - "0.1116" - ], - "hole_limit_min": [ - "0.046" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Matte @BBL X2D", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_11", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.0066" + ], + "counter_limit_max": [ + "0.082" + ], + "counter_limit_min": [ + "0.0066" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "40", + "22", + "22", + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0026" + ], + "hole_coef_3": [ + "0.1116" + ], + "hole_limit_max": [ + "0.1116" + ], + "hole_limit_min": [ + "0.046" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json index e98b6c3633..e5e552d9fd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Matte @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Matte @base.json @@ -1,38 +1,32 @@ { - "type": "filament", - "name": "Bambu PLA Matte @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFXIbw5D", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "impact_strength_z": [ - "6.6" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFXIbw5D", + "instantiation": "false", + "filament_cost": [ + "15.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "6.6" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1 0.2 nozzle.json index 9c6d0f5c22..06e56bced1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1.json index 8a752ef028..b4fcb8fcb5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A1", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A1", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json index b88ef9fff6..f3f5d36e40 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json index c0973a90fc..fce4ffa817 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A1M.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A1M", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A1M", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json index 7362252ecd..e66ae6d862 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.2 nozzle.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_22", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_overhang_4_4_speed": [ - "35" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_22", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_overhang_4_4_speed": [ + "35" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json index df84dabb95..066f53bc5b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.6 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_37", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_37", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json index 3b3e4459c2..af365bc1d8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L 0.8 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_38", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_38", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L.json index 9eba89e942..9d9e62d282 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL A2L.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL A2L", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL A2L", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json index 5bfe6de92a..d500051bb1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.2 nozzle.json @@ -1,186 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json index 4ac0996ec9..75b221dcd3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C 0.4 nozzle.json @@ -1,186 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_20", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_20", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C.json index fde942ad58..1ec6730b1a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2C.json @@ -1,187 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2C", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_21", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2C", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_21", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json index a492831a50..f32321f179 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D 0.2 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json index 6d66995bd5..933953be98 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2D.json @@ -1,136 +1,98 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2D", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2D", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP 0.2 nozzle.json index 8b0958cf1e..c3d438baa2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP.json index 51ce68a56e..87e11db490 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2DP.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2DP", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2DP", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S 0.2 nozzle.json index 44c1ea4df4..e437ccd9f9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S 0.2 nozzle.json @@ -1,140 +1,87 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S.json index 7ee5ea8d79..9c5648425d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL H2S.json @@ -1,142 +1,114 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL H2S", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL H2S", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.2 nozzle.json index c412967d43..d178683ef1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.2 nozzle.json @@ -1,177 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.6 nozzle.json index b5fb8098b8..7c26b3e980 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.6 nozzle.json @@ -1,177 +1,88 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_24", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_24", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.8 nozzle.json index a317e4d5cb..8211ae0b54 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S 0.8 nozzle.json @@ -1,177 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_25", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_25", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S.json index 6b75c8735d..5478a77797 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL P2S.json @@ -1,174 +1,80 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL P2S", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL P2S", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json index bfb349d52b..6b95f9a597 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL X1", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL X1", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json index c5fbe05d03..31d3f0f368 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.2 nozzle.json @@ -1,125 +1,52 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..098b7435e6 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C 0.6 nozzle.json @@ -0,0 +1,66 @@ +{ + "type": "filament", + "name": "Bambu PLA Metal @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_28", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json index 70816bef29..197e07ca4d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X1C.json @@ -1,130 +1,71 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL X1C", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL X1C", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json index d88aa17534..ceb5c15240 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.2 nozzle.json @@ -1,275 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json index 533a24b7dd..143ca8436f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D 0.4 nozzle.json @@ -1,272 +1,131 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D.json index 14469bc7e8..eadce2649f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @BBL X2D.json @@ -1,276 +1,135 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL X2D", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_18", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL X2D", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json index 9a12d97f4d..adf2d779e5 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Metal @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Metal @base.json @@ -1,30 +1,27 @@ { - "type": "filament", - "name": "Bambu PLA Metal @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFrKLeE3", - "instantiation": "false", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_seam_type": [ - "none" - ], - "impact_strength_z": [ - "16.8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFrKLeE3", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "16.8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..63ea4f3754 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1 0.2 nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1 0.8 nozzle.json new file mode 100644 index 0000000000..9440a91732 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL A1 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1.json new file mode 100644 index 0000000000..245ccd3c3d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL A1", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..7569bf572c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M 0.2 nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M 0.8 nozzle.json new file mode 100644 index 0000000000..fab321d37f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M 0.8 nozzle.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL A1M 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M.json new file mode 100644 index 0000000000..0577eca47c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A1M.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL A1M", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "10" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json index f910eba123..62ebcc0ad4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.2 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "filament_overhang_4_4_speed": [ - "30" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retract_before_wipe": [ - "0" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "25" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_overhang_4_4_speed": [ + "30" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "25" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json index 290e941ac8..1da1c1a536 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.6 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_41", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_retract_before_wipe": [ - "0" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_41", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json index d642e84cfd..e42d908fff 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L 0.8 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_retract_before_wipe": [ - "0" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L.json index b5ce60acd9..3410271a51 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL A2L.json @@ -1,53 +1,53 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL A2L", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_retract_before_wipe": [ - "0" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL A2L", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json index 2a4b3a6fa4..2fce1d0a33 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.2 nozzle.json @@ -1,183 +1,90 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_change_length": [ - "4" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.6 nozzle.json new file mode 100644 index 0000000000..54866db466 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.6 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL H2C 0.6 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_42", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..88ab702e3e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C 0.8 nozzle.json @@ -0,0 +1,119 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_43", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C.json index a53085235d..8a01b018c3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2C.json @@ -1,182 +1,117 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2C", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_change_length": [ - "4" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle", - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Pure @BBL H2C", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json index d3b7f06b97..e30e6203b4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.2 nozzle.json @@ -1,171 +1,70 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..8126977f4b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_44", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json index a26b9ba6b3..aa981c5177 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D 0.8 nozzle.json @@ -1,169 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D.json index 0d9e3429b2..002589887f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2D.json @@ -1,168 +1,90 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2D", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL H2D", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_13", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json index 1b87e764ab..27c1be9d5f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.2 nozzle.json @@ -1,171 +1,66 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..66a86f93ae --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_45", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json index d4148f9f02..dc62f9cecc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP 0.8 nozzle.json @@ -1,169 +1,75 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP.json index f9ecfa7a20..516cb30a90 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2DP.json @@ -1,168 +1,75 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2DP", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_16", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Pure @BBL H2DP", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_16", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json index ad2e498940..1206f03c01 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.2 nozzle.json @@ -1,171 +1,78 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_17", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..9a14fb210c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.6 nozzle.json @@ -0,0 +1,113 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_46", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..a780734dc8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S 0.8 nozzle.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_47", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S.json index dccdd17135..a3ce5df6ea 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL H2S.json @@ -1,171 +1,101 @@ { - "type": "filament", - "name": "Bambu PLA Pure @BBL H2S", - "inherits": "Bambu PLA Pure @base", - "from": "system", - "setting_id": "GFSA19_18", - "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Pure @BBL H2S", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_18", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..9c77055180 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P 0.2 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_23", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P 0.8 nozzle.json new file mode 100644 index 0000000000..18d8fd4a8a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P 0.8 nozzle.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL P1P 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_24", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P.json new file mode 100644 index 0000000000..ff2ff52185 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P1P.json @@ -0,0 +1,87 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL P1P", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_25", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.2 nozzle.json new file mode 100644 index 0000000000..053c0cc82a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.2 nozzle.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_26", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.4 nozzle.json new file mode 100644 index 0000000000..cf2c8c5584 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.4 nozzle.json @@ -0,0 +1,106 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL P2S 0.4 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_27", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..081ae17a81 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.6 nozzle.json @@ -0,0 +1,105 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_28", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..51b2957e47 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL P2S 0.8 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..c86ce1f957 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C 0.2 nozzle.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_30", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C 0.8 nozzle.json new file mode 100644 index 0000000000..8598235140 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C 0.8 nozzle.json @@ -0,0 +1,73 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_31", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C.json new file mode 100644 index 0000000000..95fec82c2f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X1C.json @@ -0,0 +1,70 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL X1C", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_32", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.2 nozzle.json new file mode 100644 index 0000000000..32120fd0c8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.2 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_33", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.4 nozzle.json new file mode 100644 index 0000000000..b6079ea5d2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.4 nozzle.json @@ -0,0 +1,143 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_34", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.6 nozzle.json new file mode 100644 index 0000000000..358b0ff624 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.6 nozzle.json @@ -0,0 +1,142 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL X2D 0.6 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_35", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..73a363cfab --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @BBL X2D 0.8 nozzle.json @@ -0,0 +1,116 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "GFSA19_36", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Pure @base.json b/resources/profiles/BBL/filament/Bambu PLA Pure @base.json index f947b2efaa..78d099c98b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Pure @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Pure @base.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu PLA Pure @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFTHDCqA", - "instantiation": "false", - "filament_cost": [ - "21.99" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Pure @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFTHDCqA", + "instantiation": "false", + "filament_cost": [ + "16.99" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1 0.2 nozzle.json index 0e8d593d3c..5072942f14 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1.json index 4e05663ee9..bfb8d47b04 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A1", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A1", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json index 5b68a42896..e70a76f872 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json index 3fffe5cdd4..06f8c99d79 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A1M.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A1M", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A1M", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json index 3f6fb8e7b7..7fe2facbff 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.2 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json index d2dec88c9f..0860d194dc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.4 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A2L 0.4 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A2L 0.4 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json index 6124848c0f..d082cd0f9e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.6 nozzle.json @@ -1,53 +1,53 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_33", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_33", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json index ee0d0c82cf..fa256f250f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL A2L 0.8 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_34", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_34", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json index 3257a921d8..5f6ac11da9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.2 nozzle.json @@ -1,207 +1,118 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_21", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.0036" - ], - "counter_coef_3": [ - "-0.0218" - ], - "counter_limit_max": [ - "0.0682" - ], - "counter_limit_min": [ - "-0.0218" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0037" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1261" - ], - "hole_limit_min": [ - "0.0336" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_21", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json index f5903cea1f..d738fa5afd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C 0.4 nozzle.json @@ -1,207 +1,149 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_22", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.0036" - ], - "counter_coef_3": [ - "-0.0218" - ], - "counter_limit_max": [ - "0.0682" - ], - "counter_limit_min": [ - "-0.0218" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0037" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1261" - ], - "hole_limit_min": [ - "0.0336" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_22", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C.json index e46f139763..e690d6b168 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2C.json @@ -1,208 +1,150 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2C", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_23", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.0036" - ], - "counter_coef_3": [ - "-0.0218" - ], - "counter_limit_max": [ - "0.0682" - ], - "counter_limit_min": [ - "-0.0218" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0037" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1261" - ], - "hole_limit_min": [ - "0.0336" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2C", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_23", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json index 545ea517eb..c14f4c2f2b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D 0.2 nozzle.json @@ -1,140 +1,87 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json index 2d1698855d..991a51de13 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2D.json @@ -1,160 +1,116 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2D", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_16", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.02" - ], - "counter_coef_3": [ - "-0.01" - ], - "counter_limit_min": [ - "-0.05" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.2" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2D", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_16", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_min": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP 0.2 nozzle.json index 609e1f2707..7a619beb01 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP 0.2 nozzle.json @@ -1,140 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_18", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_18", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP.json index f161206d68..3a26b9d69e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2DP.json @@ -1,160 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2DP", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.02" - ], - "counter_coef_3": [ - "-0.01" - ], - "counter_limit_min": [ - "-0.05" - ], - "counter_limit_max": [ - "0.05" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.2" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2DP", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.02" + ], + "counter_coef_3": [ + "-0.01" + ], + "counter_limit_max": [ + "0.05" + ], + "counter_limit_min": [ + "-0.05" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "hole_coef_3": [ + "0.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S 0.2 nozzle.json index 055130de7d..ad5e9778c7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S 0.2 nozzle.json @@ -1,140 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_min": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "hole_limit_max": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S.json index 5b678d971f..6221528724 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL H2S.json @@ -1,142 +1,131 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL H2S", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL H2S", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_min": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "hole_limit_max": [ + "0.1261" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.2 nozzle.json index c6450cc408..3600a41bbb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.2 nozzle.json @@ -1,177 +1,96 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.6 nozzle.json index 061877363a..71b9f5522b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.6 nozzle.json @@ -1,177 +1,126 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_26", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_26", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4" + ], + "filament_wipe": [ + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.8 nozzle.json index 3584dbf145..95374a8d59 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S 0.8 nozzle.json @@ -1,177 +1,112 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_27", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_27", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil" + ], + "filament_wipe": [ + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json index 0ad5711704..a650da3329 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL P2S.json @@ -1,177 +1,126 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL P2S", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "80" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL P2S", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_17", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "80" + ], + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4" + ], + "filament_wipe": [ + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json index ac5ed481f2..2f8703e79d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL X1", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL X1", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json index 4263063102..1c1a4ea93f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C 0.2 nozzle.json @@ -1,125 +1,52 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json index f0440d3ece..1d409b3705 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X1C.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL X1C", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL X1C", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json index 280a747d47..25cef68be3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.2 nozzle.json @@ -1,302 +1,149 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0036" - ], - "counter_coef_3": [ - "-0.0218" - ], - "counter_limit_max": [ - "0.0682" - ], - "counter_limit_min": [ - "-0.0218" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0037" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1261" - ], - "hole_limit_min": [ - "0.0336" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_13", + "instantiation": "true", + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json index 2cc9b50bb7..2ff4aa3612 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D 0.4 nozzle.json @@ -1,302 +1,163 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "200", - "200", - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0036" - ], - "counter_coef_3": [ - "-0.0218" - ], - "counter_limit_max": [ - "0.0682" - ], - "counter_limit_min": [ - "-0.0218" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0037" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1261" - ], - "hole_limit_min": [ - "0.0336" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_14", + "instantiation": "true", + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200", + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D.json index 0d10764e68..909d2120be 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @BBL X2D.json @@ -1,303 +1,164 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL X2D", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_20", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "200", - "200", - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0036" - ], - "counter_coef_3": [ - "-0.0218" - ], - "counter_limit_max": [ - "0.0682" - ], - "counter_limit_min": [ - "-0.0218" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0037" - ], - "hole_coef_3": [ - "0.1261" - ], - "hole_limit_max": [ - "0.1261" - ], - "hole_limit_min": [ - "0.0336" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL X2D", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_20", + "instantiation": "true", + "counter_coef_2": [ + "0.0036" + ], + "counter_coef_3": [ + "-0.0218" + ], + "counter_limit_max": [ + "0.0682" + ], + "counter_limit_min": [ + "-0.0218" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200", + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0037" + ], + "hole_coef_3": [ + "0.1261" + ], + "hole_limit_max": [ + "0.1261" + ], + "hole_limit_min": [ + "0.0336" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json index da20a689ee..8c5b125548 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk @base.json @@ -1,45 +1,45 @@ { - "type": "filament", - "name": "Bambu PLA Silk @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFEGNJD4", - "instantiation": "false", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_gap": [ - "0%" - ], - "impact_strength_z": [ - "4.6" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFEGNJD4", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.32" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "4.6" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1 0.2 nozzle.json index c7780b06d6..d8b23125e6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1.json index ad3d18d919..568c97495e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A1", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A1", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json index 25a61e7b69..3255f3d44d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M.json index 2317485b5c..5fa8cf6301 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A1M.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A1M", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A1M", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json index 92f6c76bc0..9cc7845814 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.2 nozzle.json @@ -1,71 +1,71 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_overhang_4_4_speed": [ - "35" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_overhang_4_4_speed": [ + "35" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json index 30f3feec05..0347bce2ac 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.4 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A2L 0.4 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A2L 0.4 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json index 4f9eeba4ba..b04c94cbab 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.6 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_35", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_35", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json index 2b09d71fe9..d25680f000 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL A2L 0.8 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_36", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_36", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json index 558486b5d4..6d0f939e60 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.2 nozzle.json @@ -1,189 +1,100 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_20", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_20", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json index 3773cbe45d..40b37f32b9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.4 nozzle.json @@ -1,189 +1,126 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_18", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "2", - "2" - ], - "filament_ramming_travel_time_nc": [ - "2", - "2" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_18", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "2", + "2", + "2" + ], + "filament_ramming_travel_time_nc": [ + "2", + "2", + "2" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..4d460cde49 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C 0.8 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_40", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "2", + "2" + ], + "filament_ramming_travel_time_nc": [ + "2", + "2" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C.json index d2f8d19124..e3a787b51c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2C.json @@ -1,190 +1,126 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2C", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "2", - "2" - ], - "filament_ramming_travel_time_nc": [ - "2", - "2" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2C", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "2", + "2", + "2" + ], + "filament_ramming_travel_time_nc": [ + "2", + "2", + "2" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json index 65770e0167..80791f03c7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.2 nozzle.json @@ -1,146 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..8c97969bf2 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.6 nozzle.json @@ -0,0 +1,124 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_41", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..f8508cd0f9 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D 0.8 nozzle.json @@ -0,0 +1,111 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_42", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json index 9ec6409c7e..a1e9d5a6a9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2D.json @@ -1,148 +1,96 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2D", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2D", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "1" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.2 nozzle.json index ae9a3c0354..6ef42bcf5f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.2 nozzle.json @@ -1,146 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..acb22ba23a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_43", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..a4b9e799a4 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_44", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP.json index cc048f4ec3..cba3b52ae0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2DP.json @@ -1,148 +1,85 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2DP", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2DP", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_13", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.2 nozzle.json index 1353b51526..b1bf42971c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.2 nozzle.json @@ -1,146 +1,81 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_22", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_22", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..8868530a19 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.6 nozzle.json @@ -0,0 +1,123 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_45", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..7e3270c32a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S 0.8 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_46", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S.json index 7e46d5ca0f..7d143d2360 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL H2S.json @@ -1,148 +1,111 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL H2S", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_21", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL H2S", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_21", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P 0.2 nozzle.json index 8ae8d24e3c..81c2083b09 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_04", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_04", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..ede41b7ea6 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P 0.6 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_30", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P.json index 89c2d0177e..19a3e6a26a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1P.json @@ -1,142 +1,68 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL P1P", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_03", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P1P", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_03", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..624d96182b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1S 0.4 nozzle.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P1S 0.4 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_29", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "30" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "30" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1S 0.6 nozzle.json new file mode 100644 index 0000000000..da488c277e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P1S 0.6 nozzle.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P1S 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_28", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "30" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "30" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.2 nozzle.json index 64451175bd..05f3286f11 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.2 nozzle.json @@ -1,183 +1,78 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.6 nozzle.json index eab7affb62..c5a9dd880a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.6 nozzle.json @@ -1,180 +1,105 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "0.4", - "0.4" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_z_hop": [ + "0.4", + "0.4", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.8 nozzle.json index b891ac0051..1285d9a709 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S 0.8 nozzle.json @@ -1,180 +1,83 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_26", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_26", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S.json index 964f180227..027b694a64 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL P2S.json @@ -1,183 +1,88 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL P2S", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "80" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL P2S", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "80" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1.json index ccdcc80dcb..db84ef6e8f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL X1", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X1", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C 0.2 nozzle.json index 8b8a12d926..223de5df5f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C 0.2 nozzle.json @@ -1,131 +1,58 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..99696df05a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C 0.6 nozzle.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_27", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "30" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_length": [ + "nil", + "0.6" + ], + "filament_retraction_speed": [ + "nil", + "30" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C.json index 313a55cdce..2a800db9e1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X1C.json @@ -1,136 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL X1C", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X1C", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json index df46de0024..cab7d6cad2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.2 nozzle.json @@ -1,284 +1,131 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json index ffbd1f363e..a8bec02327 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.4 nozzle.json @@ -1,281 +1,142 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "200", - "200", - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "3", - "3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200", + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "3", + "3", + "3" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..d9f3f30add --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D 0.8 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_47", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200", + "200" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D.json index 419eabdc03..b43c1d1844 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @BBL X2D.json @@ -1,282 +1,142 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @BBL X2D", - "inherits": "Bambu PLA Silk+ @base", - "from": "system", - "setting_id": "GFSA06_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "200", - "200", - "200", - "200" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Silk+ @BBL X2D", + "inherits": "Bambu PLA Silk+ @base", + "from": "system", + "setting_id": "GFSA06_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "200", + "200", + "200", + "200", + "200", + "200" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json b/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json index 17a7e21b79..6714b35375 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Silk+ @base.json @@ -1,39 +1,36 @@ { - "type": "filament", - "name": "Bambu PLA Silk+ @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFUanySo", - "instantiation": "false", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "8.5" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Silk+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFUanySo", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "15.99" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "8.5" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1.json index 79e55a3169..04ac842952 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL A1", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL A1", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json index 2fa3ae04de..e961b1fcd6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL A1M", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL A1M", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json index 8e133e78f2..2f0acae25a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.6 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json index 4b7c37e987..a9e854d9b6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L 0.8 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L.json index e3d2d6b7a1..33ace09427 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL A2L.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL A2L", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL A2L", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json index 7cdd1dd269..d635be71a7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C 0.4 nozzle.json @@ -1,186 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C.json index 8be484d1e4..59f9880889 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2C.json @@ -1,187 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL H2C", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL H2C", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json index daa0c39db1..452a69ed7d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2D.json @@ -1,136 +1,98 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL H2D", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL H2D", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2DP.json index 1456f4353b..8339de1440 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2DP.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL H2DP", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL H2DP", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2S.json index 3f5a87a026..53ce3da06c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL H2S.json @@ -1,145 +1,117 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL H2S", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL H2S", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.6 nozzle.json index ce386a6a07..8368e4c558 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.6 nozzle.json @@ -1,177 +1,93 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.6", - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.6", + "0.6", + "0.6" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.8 nozzle.json index 58eac67281..65cba64fe1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S 0.8 nozzle.json @@ -1,174 +1,75 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S.json index 6edd2b7bbd..2aea67b9b3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL P2S.json @@ -1,174 +1,80 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL P2S", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL P2S", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json index e5c703ee07..b527db03e4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL X1", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL X1", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..8edff08abf --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C 0.6 nozzle.json @@ -0,0 +1,66 @@ +{ + "type": "filament", + "name": "Bambu PLA Sparkle @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_16", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json index 320f07764c..b971229939 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X1C.json @@ -1,130 +1,71 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL X1C", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL X1C", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json index 9f041ca69d..8899893ddb 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D 0.4 nozzle.json @@ -1,272 +1,131 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_08", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D.json index 5bf2d292d6..d002d0e6ec 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @BBL X2D.json @@ -1,276 +1,135 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL X2D", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL X2D", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json index 6ecad9584e..d0a645f165 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Sparkle @base.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFDxfPgH", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.26" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "10.3" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFDxfPgH", + "instantiation": "false", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "10.3" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1 0.2 nozzle.json index 91c2a7951b..f18a4df2c8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1.json index 92cfd83431..f443261748 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL A1", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL A1", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json index b3466ee3c9..fe8e01f774 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json index a95888721c..35183f713b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A1M.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL A1M", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL A1M", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json index 048ab331a3..420b7a91a9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L 0.2 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L.json index c223f15301..cb25cff6ca 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL A2L.json @@ -1,49 +1,49 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL A2L", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL A2L", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json index bcb81af9f8..afc18f86e9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.2 nozzle.json @@ -1,186 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_22", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_22", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json index 2f63485604..395e917d6d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C 0.4 nozzle.json @@ -1,204 +1,146 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_20", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.024" - ], - "counter_limit_max": [ - "0.1" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.2041" - ], - "hole_limit_min": [ - "0.08" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_20", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.024" + ], + "counter_limit_max": [ + "0.1" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0081" + ], + "hole_coef_3": [ + "0.2041" + ], + "hole_limit_min": [ + "0.08" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C.json index 99a43532bd..687135999b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2C.json @@ -1,205 +1,147 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2C", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_21", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.024" - ], - "counter_limit_max": [ - "0.1" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.2041" - ], - "hole_limit_min": [ - "0.08" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2C", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_21", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.024" + ], + "counter_limit_max": [ + "0.1" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0081" + ], + "hole_coef_3": [ + "0.2041" + ], + "hole_limit_min": [ + "0.08" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json index 4b45f4fe05..2f2c0fac71 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D 0.2 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json index c5770de509..e7a65b1697 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2D.json @@ -1,154 +1,116 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2D", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_06", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.024" - ], - "counter_limit_max": [ - "0.1" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.2041" - ], - "hole_limit_min": [ - "0.08" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2D", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_06", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.024" + ], + "counter_limit_max": [ + "0.1" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0081" + ], + "hole_coef_3": [ + "0.2041" + ], + "hole_limit_min": [ + "0.08" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP 0.2 nozzle.json index f6bd13e744..18b446e8db 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP.json index a0e115bff0..3b89d63f14 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2DP.json @@ -1,154 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2DP", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_15", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.024" - ], - "counter_limit_max": [ - "0.1" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0081" - ], - "hole_coef_3": [ - "0.2041" - ], - "hole_limit_min": [ - "0.08" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2DP", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_15", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.024" + ], + "counter_limit_max": [ + "0.1" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0081" + ], + "hole_coef_3": [ + "0.2041" + ], + "hole_limit_min": [ + "0.08" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S 0.2 nozzle.json index c5b677c0f2..935d868854 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S 0.2 nozzle.json @@ -1,140 +1,87 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S.json index de820209ad..0f202955c9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL H2S.json @@ -1,142 +1,114 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL H2S", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL H2S", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S 0.2 nozzle.json index 4360b92608..6f9359930c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S 0.2 nozzle.json @@ -1,171 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S.json index a719c24f79..026e245fe7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL P2S.json @@ -1,173 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL P2S", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL P2S", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json index 44a3a8ccd3..1b357860f3 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL X1", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL X1", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json index 4fc157f4a2..c7afdd6a60 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C 0.2 nozzle.json @@ -1,125 +1,52 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json index 5d2d8d305a..f250ad8e99 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X1C.json @@ -1,131 +1,58 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL X1C", - "renamed_from": "Bambu PLA Impact @BBL X1C", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL X1C", + "renamed_from": "Bambu PLA Impact @BBL X1C", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json index e47ebf91a4..783771d07e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.2 nozzle.json @@ -1,275 +1,92 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_19", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "2", - "2" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json index fb61fc0555..6f3492d94c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D 0.4 nozzle.json @@ -1,272 +1,99 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D.json index d6a6c3e64a..712763b1b7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @BBL X2D.json @@ -1,273 +1,132 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL X2D", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_18", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL X2D", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json index 09b71a842d..ef45e53c17 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough @base.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu PLA Tough @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFaQMgRH", - "instantiation": "false", - "filament_cost": [ - "28.99" - ], - "filament_density": [ - "1.26" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_seam_type": [ - "none" - ], - "impact_strength_z": [ - "12.3" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFaQMgRH", + "instantiation": "false", + "filament_cost": [ + "28.99" + ], + "filament_density": [ + "1.26" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ], + "impact_strength_z": [ + "12.3" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json index e9f3e10be7..e99518ff40 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_00", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_00", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1.json index 226e372557..c87e1b3c59 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A1", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_01", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A1", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_01", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json index 1cf0b12abf..2b8ab78db2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_02", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_02", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M.json index 7367eb1c3c..9a61607c47 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A1M.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A1M", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_03", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A1M", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_03", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json index 1de9892a2a..3d95f85ff1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.2 nozzle.json @@ -1,71 +1,71 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "filament_overhang_4_4_speed": [ - "35" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "filament_overhang_4_4_speed": [ + "35" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json index 31c694aeb9..3163c3c906 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.4 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A2L 0.4 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_20", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A2L 0.4 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_20", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json index 8d6f6b9258..fb6e589539 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.6 nozzle.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_47", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_47", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json index 3272f7c892..0d03c808c2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL A2L 0.8 nozzle.json @@ -1,59 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_48", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "245" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_48", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "245" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json index 4fdd5b2f3c..4dddeede4f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.2 nozzle.json @@ -1,180 +1,91 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_21", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_21", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json index c33c99a53f..8ea86729b7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.6 nozzle.json @@ -1,192 +1,134 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2C 0.6 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_22", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_3": [ - "0.18" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2C 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_22", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_3": [ + "0.18" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json index 903335f325..e1c4a1853f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C 0.8 nozzle.json @@ -1,192 +1,119 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2C 0.8 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_23", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_3": [ - "0.18" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_23", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_3": [ + "0.18" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C.json index a12d2cd987..ee7aa68a18 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2C.json @@ -1,192 +1,134 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2C", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_24", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_3": [ - "0.18" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2C", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_24", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_3": [ + "0.18" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json index bfb1b063ff..b0b1356406 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.2 nozzle.json @@ -1,162 +1,66 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json index 9e55dc49ad..a55438aa3a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.6 nozzle.json @@ -1,174 +1,105 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2D 0.6 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_05", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_05", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json index 2d8fdd75cc..84b80f79a7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D 0.8 nozzle.json @@ -1,162 +1,94 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_06", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D.json index 28fc29155d..23aee02dfc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2D.json @@ -1,174 +1,105 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2D", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_07", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2D", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_07", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.2 nozzle.json index b2d1c4376a..c8c5f19e1c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.2 nozzle.json @@ -1,162 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.6 nozzle.json index 9481fd8afe..8b046bf504 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.6 nozzle.json @@ -1,174 +1,91 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_09", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_09", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.8 nozzle.json index 6fe54ee06b..d35ab9dd0c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP 0.8 nozzle.json @@ -1,162 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP.json index e0a4c9e780..5e85337111 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2DP.json @@ -1,174 +1,91 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2DP", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_11", - "instantiation": "true", - "counter_coef_2": [ - "0.003" - ], - "counter_coef_3": [ - "0.01" - ], - "counter_limit_max": [ - "0.088" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "hole_coef_3": [ - "0.18" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2DP", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_11", + "instantiation": "true", + "counter_coef_2": [ + "0.003" + ], + "counter_coef_3": [ + "0.01" + ], + "counter_limit_max": [ + "0.088" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_3": [ + "0.18" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.2 nozzle.json index 900e80fcfd..d1f203959e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.2 nozzle.json @@ -1,134 +1,78 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_12", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.6 nozzle.json index a1ffa854ef..8023fe75fc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.6 nozzle.json @@ -1,134 +1,103 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2S 0.6 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.8 nozzle.json index 6511b6677e..949c8e6452 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S 0.8 nozzle.json @@ -1,134 +1,90 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2S 0.8 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S.json index f28accada3..4dcda1d0d8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL H2S.json @@ -1,134 +1,103 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL H2S", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL H2S", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.2 nozzle.json index 9762d53285..22e089b33a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.2 nozzle.json @@ -1,171 +1,80 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.6 nozzle.json index c38094415a..a6b1d03f76 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.6 nozzle.json @@ -1,171 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_26", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_26", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.8 nozzle.json index 2524702b32..4315da6996 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S 0.8 nozzle.json @@ -1,171 +1,88 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_27", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_27", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S.json index b2cc2849d5..6454b9885f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL P2S.json @@ -1,171 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL P2S", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_28", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL P2S", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_28", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1.json index cb2b3784b6..80e7689736 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1.json @@ -1,133 +1,68 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL X1", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_29", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X1", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json index 3131968642..4e7fed4867 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_30", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_30", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..4eac2ec84a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.6 nozzle.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_37", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json index fdc21498a0..7f7ede7a6f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C 0.8 nozzle.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_31", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_31", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C.json index 35812c70ea..47ef6f0b56 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X1C.json @@ -1,127 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL X1C", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_32", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X1C", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_32", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json index 00908fcc1b..be2f3c593b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.2 nozzle.json @@ -1,275 +1,134 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "1.0084", - "1.0084", - "1.0084", - "1.0084" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245", - "245", - "245" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "1.0084", + "1.0084", + "1.0084", + "1.0084" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json index 541368a581..d520d07e28 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.4 nozzle.json @@ -1,272 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1.0084", - "1.0084", - "1.0084", - "1.0084" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245", - "245", - "245" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1.0084", + "1.0084", + "1.0084", + "1.0084", + "1.0084", + "1.0084" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..bf000bd0b1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D 0.8 nozzle.json @@ -0,0 +1,131 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_52", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1.0084", + "1.0084", + "1.0084", + "1.0084" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D.json index aadd4ae6db..f10ee7baa9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @BBL X2D.json @@ -1,273 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL X2D", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_18", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1.0084", - "1.0084", - "1.0084", - "1.0084" - ], - "filament_max_volumetric_speed": [ - "21", - "21", - "21", - "21" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "245" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "245", - "245", - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245", - "245", - "245" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Tough+ @BBL X2D", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1.0084", + "1.0084", + "1.0084", + "1.0084", + "1.0084", + "1.0084" + ], + "filament_max_volumetric_speed": [ + "21", + "21", + "21", + "21", + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "245" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json b/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json index ccc534d02f..3aeaf90be1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Tough+ @base.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF342jVN", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "80" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.21" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_change_length": [ - "5" - ], - "filament_prime_volume": [ - "30" - ], - "impact_strength_z": [ - "13.8" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OF342jVN", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "80" + ], + "filament_change_length": [ + "5" + ], + "filament_cost": [ + "20.99" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_prime_volume": [ + "30" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "13.8" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.2 nozzle.json index 8623b0876b..8031d53b68 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A1 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "filament_retract_before_wipe": [ - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A1 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.8 nozzle.json index 08a0412f63..b8aec9875a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1 0.8 nozzle.json @@ -1,42 +1,42 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A1 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_retract_before_wipe": [ - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A1 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1.json index 64e2e08784..83de977eed 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A1", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_retract_before_wipe": [ - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A1", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.2 nozzle.json index 7733c402fa..06761f55e9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A1M 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "filament_retract_before_wipe": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A1M 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json index e55d837499..95056fe081 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M 0.8 nozzle.json @@ -1,42 +1,42 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A1M 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_retract_before_wipe": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A1M 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M.json index 8e95a39c60..1838161dab 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A1M.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A1M", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_09", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_retract_before_wipe": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A1M", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_09", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_retract_before_wipe": [ + "0" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json index d485c9ce20..21d9e8ee0d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.2 nozzle.json @@ -1,71 +1,71 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A2L 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "filament_overhang_4_4_speed": [ - "35" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retract_before_wipe": [ - "0" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "25" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A2L 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "filament_overhang_4_4_speed": [ + "35" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "25" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json index 0944ef86cf..4e3a0a6b0c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.6 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_42", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_retract_before_wipe": [ - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_42", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_retract_before_wipe": [ + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json index 452a5fbd73..36e01fc851 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L 0.8 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_19", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_retract_before_wipe": [ - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_retract_before_wipe": [ + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L.json index 0f59f4d269..5833c872c0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL A2L.json @@ -1,59 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL A2L", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_20", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_retract_before_wipe": [ - "0" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL A2L", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_20", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_retract_before_wipe": [ + "0" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json index 1bf9f40acc..743a5d09aa 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.2 nozzle.json @@ -1,189 +1,100 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2C 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_30", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2C 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_30", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.6 nozzle.json new file mode 100644 index 0000000000..bf8d33de15 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.6 nozzle.json @@ -0,0 +1,143 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2C 0.6 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_43", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..7c19dbe1a7 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C 0.8 nozzle.json @@ -0,0 +1,128 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_44", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C.json index 1a4a5607ab..6a059d251b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2C.json @@ -1,191 +1,131 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2C", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_29", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle", - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2C", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json index 2f9bba7021..f955f7d6cc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.2 nozzle.json @@ -1,131 +1,66 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2D 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2D 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..595316f8b8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.6 nozzle.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_45", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json index f8a994f832..6fd684b73d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D 0.8 nozzle.json @@ -1,132 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json index f2bfcc1efb..ccfd220ee1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2D.json @@ -1,131 +1,93 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2D", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_12", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2D", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "1" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.2 nozzle.json index 413e9ec1d4..4463cff56e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2DP 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_33", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2DP 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_33", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..d4e2e52372 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,97 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_46", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.8 nozzle.json index 0bfcba025f..995c2349d4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP 0.8 nozzle.json @@ -1,132 +1,76 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_32", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_32", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP.json index 150f5e1da3..eb7ff81269 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2DP.json @@ -1,131 +1,76 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2DP", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_31", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2DP", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_31", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\nM145 P0 ; set airduct mode to cooling mode\nM142 P1 R35 S40 U0.3 V0.5 ; set chamber autocooling" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.2 nozzle.json index 7ea5aedb49..8ee80929b7 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.2 nozzle.json @@ -1,143 +1,90 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2S 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_16", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2S 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_16", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..264712fbc9 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.6 nozzle.json @@ -0,0 +1,128 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_47", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_change_length": [ + "4" + ], + "filament_prime_volume": [ + "30" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..398d122abe --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S 0.8 nozzle.json @@ -0,0 +1,115 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_48", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_change_length": [ + "4" + ], + "filament_prime_volume": [ + "30" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S.json index d0e6f37a75..5a1f621995 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL H2S.json @@ -1,146 +1,116 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL H2S", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_15", - "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA Translucent @BBL H2S", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_15", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.2 nozzle.json index 99a44c1be4..00bc9dac11 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.2 nozzle.json @@ -1,143 +1,74 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.8 nozzle.json index 95e0eb7a6a..670d60514e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P 0.8 nozzle.json @@ -1,144 +1,75 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL P1P 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL P1P 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P.json index c9271463e7..7ae191d7af 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P1P.json @@ -1,143 +1,74 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL P1P", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL P1P", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.2 nozzle.json index 076db70bc1..f4d864f29e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.2 nozzle.json @@ -1,180 +1,97 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL P2S 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_24", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL P2S 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_24", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.4 nozzle.json index bb50b18639..c09cce8eaf 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.4 nozzle.json @@ -1,178 +1,89 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL P2S 0.4 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_21", - "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Translucent @BBL P2S 0.4 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_21", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.6 nozzle.json index 505f25435e..2725f38791 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.6 nozzle.json @@ -1,177 +1,98 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_22", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "50", - "50" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA Translucent @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_22", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8" + ], + "filament_retraction_speed": [ + "50", + "50", + "50" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.8 nozzle.json index 97a3b7a1fa..fda701016e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL P2S 0.8 nozzle.json @@ -1,174 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.2 nozzle.json index 6f85e21a93..56c2cb1916 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.2 nozzle.json @@ -1,128 +1,59 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL X1C 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL X1C 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.8 nozzle.json index c2d3a11dfb..41f54caeb0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C 0.8 nozzle.json @@ -1,132 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_01", - "instantiation": "true", - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C.json index d615e497f8..cfe114c228 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X1C.json @@ -1,129 +1,60 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL X1C", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_00", - "instantiation": "true", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", - "filament_retract_before_wipe": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL X1C", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_00", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retract_before_wipe": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json index 08c0253238..9ff9f3c7c9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.2 nozzle.json @@ -1,275 +1,140 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL X2D 0.2 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_25", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "5", - "5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "50", - "50" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "0", - "0", - "0", - "0" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "nozzle_temperature": [ - "250", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "250", - "220", - "220", - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL X2D 0.2 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "nil", + "5", + "5" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "50", + "50" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "250", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "250", + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json index 9bf012934e..8fbd944596 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.4 nozzle.json @@ -1,276 +1,151 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_26", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "0", - "0", - "0", - "0" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] + "type": "filament", + "name": "Bambu PLA Translucent @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_26", + "instantiation": "true", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json index 536cdf9cb1..2efa9652d0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.6 nozzle.json @@ -1,275 +1,150 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL X2D 0.6 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_27", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "0", - "0", - "0", - "0" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] + "type": "filament", + "name": "Bambu PLA Translucent @BBL X2D 0.6 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_27", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json index 2372de3573..e8bba0ada4 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @BBL X2D 0.8 nozzle.json @@ -1,275 +1,122 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @BBL X2D 0.8 nozzle", - "inherits": "Bambu PLA Translucent @base", - "from": "system", - "setting_id": "GFSA17_28", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "0", - "0", - "0", - "0" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "GFSA17_28", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retract_before_wipe": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json b/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json index ada0a501fc..4f56335925 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Translucent @base.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Bambu PLA Translucent @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFFbSnCD", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.22" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Translucent @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFFbSnCD", + "instantiation": "false", + "filament_cost": [ + "15.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1.json index f958bca57e..f72128847a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL A1", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL A1", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1M.json index 9e4b22e6b2..545faea7b9 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A1M.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL A1M", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL A1M", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json index 787b2451b6..50c03e0547 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.6 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_28", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_28", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json index 05c3a08907..0b98e00740 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L 0.8 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_29", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_29", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L.json index 7cef051eef..d5f3807b40 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL A2L.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL A2L", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL A2L", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json index 08a53b3639..2165790d3a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C 0.4 nozzle.json @@ -1,186 +1,128 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C.json index b776afff56..1d718aa068 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2C.json @@ -1,187 +1,129 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL H2C", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_15", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL H2C", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_15", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json index edaa93a997..6b91602197 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D 0.8 nozzle.json @@ -1,134 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL H2D 0.8 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json index 706f9c88d9..de485c58fa 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2D.json @@ -1,135 +1,91 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL H2D", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL H2D", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP 0.8 nozzle.json index fc33dd9654..5fb03cf144 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP 0.8 nozzle.json @@ -1,134 +1,79 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL H2DP 0.8 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_11", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_11", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP.json index 4891afcd12..da0d1f7d95 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2DP.json @@ -1,135 +1,80 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL H2DP", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL H2DP", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2S.json index 06f54cf7a5..8d45019fdd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL H2S.json @@ -1,142 +1,108 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL H2S", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_16", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "80" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL H2S", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_16", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "80" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..abb60dfc31 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P1P 0.6 nozzle.json @@ -0,0 +1,94 @@ +{ + "type": "filament", + "name": "Bambu PLA Wood @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_23", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P1P.json index 646e929ab3..16208882d0 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P1P.json @@ -1,145 +1,95 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL P1P", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL P1P", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.6 nozzle.json index a92009e5f3..4c504bbafd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.6 nozzle.json @@ -1,171 +1,87 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_19", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.8 nozzle.json index 85ae8f3ad5..d7c9a22f24 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S 0.8 nozzle.json @@ -1,171 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL P2S 0.8 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S.json index 1131d01f2d..5af85c28bf 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL P2S.json @@ -1,171 +1,82 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL P2S", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL P2S", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1.json index f2114546da..7d6e298556 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1.json @@ -1,127 +1,62 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL X1", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL X1", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..ffde82d2c1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C 0.6 nozzle.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Bambu PLA Wood @BBL X1C 0.6 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_20", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C 0.8 nozzle.json index 70f575a7c1..977ebeb89d 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C 0.8 nozzle.json @@ -1,121 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C.json index 23f90e8f83..7036b20490 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X1C.json @@ -1,124 +1,73 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL X1C", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL X1C", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json index 4aaed174be..f46c1cfd3c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D 0.4 nozzle.json @@ -1,272 +1,139 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_12", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1", - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1", - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D.json index 39592384b1..e1c15f187c 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @BBL X2D.json @@ -1,273 +1,140 @@ { - "type": "filament", - "name": "Bambu PLA Wood @BBL X2D", - "inherits": "Bambu PLA Wood @base", - "from": "system", - "setting_id": "GFSA16_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "0.4", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @BBL X2D", + "inherits": "Bambu PLA Wood @base", + "from": "system", + "setting_id": "GFSA16_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "0.4", + "nil", + "0.4", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA Wood @base.json b/resources/profiles/BBL/filament/Bambu PLA Wood @base.json index 3ba638569b..74ae15237b 100644 --- a/resources/profiles/BBL/filament/Bambu PLA Wood @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA Wood @base.json @@ -1,38 +1,35 @@ { - "type": "filament", - "name": "Bambu PLA Wood @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFMjtqTC", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.21" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "5.6" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA Wood @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFMjtqTC", + "instantiation": "false", + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "5.6" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json index f1b5154e11..7b86bec58f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1 0.8 nozzle.json @@ -1,51 +1,51 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL A1 0.8 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL A1 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json index ef5bca4197..f27abc0df2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL A1", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL A1", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json index 0d4a58004b..af10570429 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M 0.8 nozzle.json @@ -1,51 +1,51 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL A1M 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json index a29ff89a84..06b3e679e2 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A1M.json @@ -1,50 +1,50 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL A1M", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL A1M", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json index b7a7b77290..f0b60f5564 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.6 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL A2L 0.6 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_25", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL A2L 0.6 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_25", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json index 9857537218..4e72987fc8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L 0.8 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL A2L 0.8 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_19", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "230" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL A2L 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "230" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L.json index 92e1c027d4..5b9242bdfc 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL A2L.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL A2L", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_20", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_bridge_speed": [ - "50" - ], - "filament_flush_temp_fast": [ - "240" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_overhang_4_4_speed": [ - "25" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "1" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL A2L", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_20", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_bridge_speed": [ + "50" + ], + "filament_flush_temp_fast": [ + "240" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_overhang_4_4_speed": [ + "25" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "overhang_fan_threshold": [ + "25%" + ], + "override_process_overhang_speed": [ + "1" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json index 46bbb2e021..353bf122ac 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C 0.4 nozzle.json @@ -1,198 +1,120 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_18", - "instantiation": "true", - "counter_coef_2": [ - "0.0003" - ], - "counter_coef_3": [ - "0.0224" - ], - "counter_limit_max": [ - "0.03" - ], - "counter_limit_min": [ - "0.0224" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.1173" - ], - "hole_limit_max": [ - "0.1173" - ], - "hole_limit_min": [ - "0.048" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_18", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_min": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "hole_limit_max": [ + "0.1173" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..b041ea0a2e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C 0.8 nozzle.json @@ -0,0 +1,121 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL H2C 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_26", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C.json index a347580105..0a1cb74fde 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2C.json @@ -1,199 +1,120 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL H2C", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_17", - "instantiation": "true", - "counter_coef_2": [ - "0.0003" - ], - "counter_coef_3": [ - "0.0224" - ], - "counter_limit_max": [ - "0.03" - ], - "counter_limit_min": [ - "0.0224" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.1173" - ], - "hole_limit_max": [ - "0.1173" - ], - "hole_limit_min": [ - "0.048" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL H2C", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_17", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json index 24b979d574..f2bdb2d88e 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.4 nozzle.json @@ -1,146 +1,111 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL H2D 0.4 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_08", - "instantiation": "true", - "counter_coef_2": [ - "0.012" - ], - "counter_coef_3": [ - "-0.063" - ], - "counter_limit_max": [ - "0.07" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0103" - ], - "hole_coef_3": [ - "0.1974" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL H2D 0.4 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_08", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.8" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json index 1286e0a222..8e0446d557 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.6 nozzle.json @@ -1,132 +1,111 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL H2D 0.6 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL H2D 0.6 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_06", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..51397da3a0 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2D 0.8 nozzle.json @@ -0,0 +1,86 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL H2D 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_27", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.4 nozzle.json index 556896028c..5a7b4b5592 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.4 nozzle.json @@ -1,146 +1,85 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL H2DP 0.4 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_14", - "instantiation": "true", - "counter_coef_2": [ - "0.012" - ], - "counter_coef_3": [ - "-0.063" - ], - "counter_limit_max": [ - "0.07" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hole_coef_2": [ - "-0.0103" - ], - "hole_coef_3": [ - "0.1974" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL H2DP 0.4 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_14", + "instantiation": "true", + "counter_coef_2": [ + "0.012" + ], + "counter_coef_3": [ + "-0.063" + ], + "counter_limit_max": [ + "0.07" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "hole_coef_2": [ + "-0.0103" + ], + "hole_coef_3": [ + "0.1974" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.6 nozzle.json index b5f6428cd3..693fe62b53 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.6 nozzle.json @@ -1,132 +1,70 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL H2DP 0.6 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..0abb0fc42b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_28", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_prime_volume": [ + "45" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..0d9ecda7af --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S 0.6 nozzle.json @@ -0,0 +1,113 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL H2S 0.6 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_29", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..24ca8956d1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S 0.8 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL H2S 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_30", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S.json index 48a25e7369..dc6c4235a8 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL H2S.json @@ -1,133 +1,101 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL H2S", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL H2S", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_07", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.4 nozzle.json index 7f0eef288d..7d10faad60 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.4 nozzle.json @@ -1,171 +1,100 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL P2S 0.4 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_12", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL P2S 0.4 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_12", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_min": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "hole_limit_max": [ + "0.1173" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.6 nozzle.json index a31825ef69..86e583ec10 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.6 nozzle.json @@ -1,172 +1,100 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL P2S 0.6 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL P2S 0.6 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_09", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..d18a238e59 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL P2S 0.8 nozzle.json @@ -0,0 +1,102 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL P2S 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_32", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json index 9958beef7c..4222f682b1 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C 0.8 nozzle.json @@ -1,129 +1,76 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_02", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL X1C 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.4" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json index 006f9ec2f3..44d4745a0a 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X1C.json @@ -1,125 +1,68 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL X1C", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL X1C", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.975" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "15", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json index f3b1a6b992..66eb0e92b6 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D 0.4 nozzle.json @@ -1,296 +1,155 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0003" - ], - "counter_coef_3": [ - "0.0224" - ], - "counter_limit_max": [ - "0.03" - ], - "counter_limit_min": [ - "0.0224" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "15", - "15", - "15", - "15" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.1173" - ], - "hole_limit_max": [ - "0.1173" - ], - "hole_limit_min": [ - "0.048" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_16", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15", + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "filament_wipe": [ + "nil", + "nil", + "nil", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..b8bfb13c3f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D 0.8 nozzle.json @@ -0,0 +1,131 @@ +{ + "type": "filament", + "name": "Bambu PLA-CF @BBL X2D 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_31", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D.json index 6da39af155..c2d777dffd 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @BBL X2D.json @@ -1,297 +1,131 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL X2D", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "counter_coef_2": [ - "0.0003" - ], - "counter_coef_3": [ - "0.0224" - ], - "counter_limit_max": [ - "0.03" - ], - "counter_limit_min": [ - "0.0224" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "hole_coef_2": [ - "-0.0028" - ], - "hole_coef_3": [ - "0.1173" - ], - "hole_limit_max": [ - "0.1173" - ], - "hole_limit_min": [ - "0.048" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PLA-CF @BBL X2D", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_15", + "instantiation": "true", + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "0.0224" + ], + "counter_limit_max": [ + "0.03" + ], + "counter_limit_min": [ + "0.0224" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "hole_coef_2": [ + "-0.0028" + ], + "hole_coef_3": [ + "0.1173" + ], + "hole_limit_max": [ + "0.1173" + ], + "hole_limit_min": [ + "0.048" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json index 5567889cae..89dafe790f 100644 --- a/resources/profiles/BBL/filament/Bambu PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PLA-CF @base.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu PLA-CF @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFEswT5W", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "45" - ], - "cool_plate_temp_initial_layer": [ - "45" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.22" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "7.8" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "required_nozzle_HRC": [ - "40" - ], - "supertack_plate_temp": [ - "50" - ], - "supertack_plate_temp_initial_layer": [ - "50" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFEswT5W", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_cost": [ + "31.99" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "7.8" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp": [ + "50" + ], + "supertack_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json index 48da23e4a8..6e02ac3559 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C 0.4 nozzle.json @@ -1,201 +1,118 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0036" - ], - "counter_coef_3": [ - "-0.0075" - ], - "counter_limit_max": [ - "-0.0975" - ], - "counter_limit_min": [ - "-0.0075" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.1702" - ], - "hole_limit_max": [ - "0.17" - ], - "hole_limit_min": [ - "0.04" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0036" + ], + "counter_coef_3": [ + "-0.0075" + ], + "counter_limit_max": [ + "-0.0975" + ], + "counter_limit_min": [ + "-0.0075" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.1702" + ], + "hole_limit_max": [ + "0.17" + ], + "hole_limit_min": [ + "0.04" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C.json index fa07fa6f21..62785a4973 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2C.json @@ -1,202 +1,119 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL H2C", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0036" - ], - "counter_coef_3": [ - "-0.0075" - ], - "counter_limit_max": [ - "-0.0975" - ], - "counter_limit_min": [ - "-0.0075" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.1702" - ], - "hole_limit_max": [ - "0.17" - ], - "hole_limit_min": [ - "0.04" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL H2C", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0036" + ], + "counter_coef_3": [ + "-0.0075" + ], + "counter_limit_max": [ + "-0.0975" + ], + "counter_limit_min": [ + "-0.0075" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.1702" + ], + "hole_limit_max": [ + "0.17" + ], + "hole_limit_min": [ + "0.04" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json index 5bed5e35c6..b33cf373bd 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2D.json @@ -1,133 +1,93 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL H2D", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL H2D", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0036" + ], + "counter_coef_3": [ + "-0.0075" + ], + "counter_limit_max": [ + "-0.0975" + ], + "counter_limit_min": [ + "-0.0075" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.1702" + ], + "hole_limit_max": [ + "0.17" + ], + "hole_limit_min": [ + "0.04" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2DP.json index b3afbb85a3..6e1e7d2e3e 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL H2DP", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL H2DP", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2S.json index 758ccec8a3..265f402207 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL H2S.json @@ -1,130 +1,100 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL H2S", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL H2S", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0036" + ], + "counter_coef_3": [ + "-0.0075" + ], + "counter_limit_min": [ + "-0.0075" + ], + "counter_limit_max": [ + "-0.0975" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.1702" + ], + "hole_limit_min": [ + "0.04" + ], + "hole_limit_max": [ + "0.17" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL P2S.json index 452adc0f10..01846e0988 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL P2S.json @@ -1,176 +1,102 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL P2S", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_03", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL P2S", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_03", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0036" + ], + "counter_coef_3": [ + "-0.0075" + ], + "counter_limit_max": [ + "-0.0975" + ], + "counter_limit_min": [ + "-0.0075" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.1702" + ], + "hole_limit_max": [ + "0.17" + ], + "hole_limit_min": [ + "0.04" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..e39241b82e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C 0.6 nozzle.json @@ -0,0 +1,63 @@ +{ + "type": "filament", + "name": "Bambu PPA-CF @BBL X1C 0.6 nozzle", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_10", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "12" + ], + "filament_retraction_length": [ + "nil", + "1.2" + ], + "filament_z_hop": [ + "nil", + "0.8" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C.json index e102dd285c..3a38733b59 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1C.json @@ -1,130 +1,59 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL X1C", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL X1C", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "12" + ], + "filament_retraction_length": [ + "nil", + "1.2" + ], + "filament_z_hop": [ + "nil", + "0.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1E.json index 0d94702ab6..d0ce626589 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X1E.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL X1E", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_01", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL X1E", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json index 81b06932d4..ace32ed399 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D 0.4 nozzle.json @@ -1,296 +1,117 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL X2D 0.4 nozzle", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0036" - ], - "counter_coef_3": [ - "-0.0075" - ], - "counter_limit_max": [ - "-0.0975" - ], - "counter_limit_min": [ - "-0.0075" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.1702" - ], - "hole_limit_max": [ - "0.17" - ], - "hole_limit_min": [ - "0.04" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL X2D 0.4 nozzle", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0036" + ], + "counter_coef_3": [ + "-0.0075" + ], + "counter_limit_max": [ + "-0.0975" + ], + "counter_limit_min": [ + "-0.0075" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.1702" + ], + "hole_limit_max": [ + "0.17" + ], + "hole_limit_min": [ + "0.04" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D.json index b6818e58a5..e05f66fa42 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @BBL X2D.json @@ -1,297 +1,118 @@ { - "type": "filament", - "name": "Bambu PPA-CF @BBL X2D", - "inherits": "Bambu PPA-CF @base", - "from": "system", - "setting_id": "GFSN06_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "counter_coef_2": [ - "-0.0036" - ], - "counter_coef_3": [ - "-0.0075" - ], - "counter_limit_max": [ - "-0.0975" - ], - "counter_limit_min": [ - "-0.0075" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "hole_coef_2": [ - "-0.0051" - ], - "hole_coef_3": [ - "0.1702" - ], - "hole_limit_max": [ - "0.17" - ], - "hole_limit_min": [ - "0.04" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @BBL X2D", + "inherits": "Bambu PPA-CF @base", + "from": "system", + "setting_id": "GFSN06_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "counter_coef_2": [ + "-0.0036" + ], + "counter_coef_3": [ + "-0.0075" + ], + "counter_limit_max": [ + "-0.0975" + ], + "counter_limit_min": [ + "-0.0075" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "hole_coef_2": [ + "-0.0051" + ], + "hole_coef_3": [ + "0.1702" + ], + "hole_limit_max": [ + "0.17" + ], + "hole_limit_min": [ + "0.04" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPA-CF @base.json b/resources/profiles/BBL/filament/Bambu PPA-CF @base.json index 48355afad1..0e3303cb6b 100644 --- a/resources/profiles/BBL/filament/Bambu PPA-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PPA-CF @base.json @@ -1,12 +1,15 @@ { - "type": "filament", - "name": "Bambu PPA-CF @base", - "inherits": "fdm_filament_ppa", - "from": "system", - "filament_id": "OF54B0S0", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "impact_strength_z": [ - "4.3" - ] -} + "type": "filament", + "name": "Bambu PPA-CF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "OF54B0S0", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_cost": [ + "195.99" + ], + "impact_strength_z": [ + "4.3" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json index 310768f7bb..0f7a14b29f 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C 0.4 nozzle.json @@ -1,201 +1,113 @@ { - "type": "filament", - "name": "Bambu PPS-CF @BBL H2C 0.4 nozzle", - "inherits": "Bambu PPS-CF @base", - "from": "system", - "setting_id": "GFST02_03", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0003" - ], - "counter_coef_3": [ - "-0.0033" - ], - "counter_limit_max": [ - "0.0036" - ], - "counter_limit_min": [ - "-0.0033" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_pre_cooling_temperature_nc": [ - "280", - "280" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0033" - ], - "hole_coef_3": [ - "0.1176" - ], - "hole_limit_max": [ - "0.1176" - ], - "hole_limit_min": [ - "0.035" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPS-CF @BBL H2C 0.4 nozzle", + "inherits": "Bambu PPS-CF @base", + "from": "system", + "setting_id": "GFST02_03", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "-0.0033" + ], + "counter_limit_max": [ + "0.0036" + ], + "counter_limit_min": [ + "-0.0033" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "280", + "280", + "280" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0033" + ], + "hole_coef_3": [ + "0.1176" + ], + "hole_limit_max": [ + "0.1176" + ], + "hole_limit_min": [ + "0.035" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C.json index 90d3ea985f..14dd27807e 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2C.json @@ -1,202 +1,114 @@ { - "type": "filament", - "name": "Bambu PPS-CF @BBL H2C", - "inherits": "Bambu PPS-CF @base", - "from": "system", - "setting_id": "GFST02_04", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.0003" - ], - "counter_coef_3": [ - "-0.0033" - ], - "counter_limit_max": [ - "0.0036" - ], - "counter_limit_min": [ - "-0.0033" - ], - "filament_change_length": [ - "4" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_pre_cooling_temperature_nc": [ - "280", - "280" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "hole_coef_2": [ - "-0.0033" - ], - "hole_coef_3": [ - "0.1176" - ], - "hole_limit_max": [ - "0.1176" - ], - "hole_limit_min": [ - "0.035" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "temperature_vitrification": [ - "150" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPS-CF @BBL H2C", + "inherits": "Bambu PPS-CF @base", + "from": "system", + "setting_id": "GFST02_04", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "-0.0033" + ], + "counter_limit_max": [ + "0.0036" + ], + "counter_limit_min": [ + "-0.0033" + ], + "filament_change_length": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "280", + "280", + "280" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "hole_coef_2": [ + "-0.0033" + ], + "hole_coef_3": [ + "0.1176" + ], + "hole_limit_max": [ + "0.1176" + ], + "hole_limit_min": [ + "0.035" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "temperature_vitrification": [ + "150" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json index 967b382cda..c2be6f2981 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2D.json @@ -1,142 +1,88 @@ { - "type": "filament", - "name": "Bambu PPS-CF @BBL H2D", - "inherits": "Bambu PPS-CF @base", - "from": "system", - "setting_id": "GFST02_01", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.00565" - ], - "counter_coef_3": [ - "-0.0202" - ], - "counter_limit_max": [ - "0.03" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPS-CF @BBL H2D", + "inherits": "Bambu PPS-CF @base", + "from": "system", + "setting_id": "GFST02_01", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "-0.0033" + ], + "counter_limit_max": [ + "0.0036" + ], + "counter_limit_min": [ + "-0.0033" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_prime_volume": [ + "30" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0033" + ], + "hole_coef_3": [ + "0.1176" + ], + "hole_limit_max": [ + "0.1176" + ], + "hole_limit_min": [ + "0.035" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2DP.json index 85a1dcf4db..a18c42afc6 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2DP.json @@ -1,142 +1,61 @@ { - "type": "filament", - "name": "Bambu PPS-CF @BBL H2DP", - "inherits": "Bambu PPS-CF @base", - "from": "system", - "setting_id": "GFST02_02", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "counter_coef_2": [ - "0.00565" - ], - "counter_coef_3": [ - "-0.0202" - ], - "counter_limit_max": [ - "0.03" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPS-CF @BBL H2DP", + "inherits": "Bambu PPS-CF @base", + "from": "system", + "setting_id": "GFST02_02", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.00565" + ], + "counter_coef_3": [ + "-0.0202" + ], + "counter_limit_max": [ + "0.03" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2S.json index 33c5fdb730..a30b757154 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL H2S.json @@ -1,130 +1,95 @@ { - "type": "filament", - "name": "Bambu PPS-CF @BBL H2S", - "inherits": "Bambu PPS-CF @base", - "from": "system", - "setting_id": "GFST02_05", - "instantiation": "true", - "chamber_temperatures": [ - "65" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PPS-CF @BBL H2S", + "inherits": "Bambu PPS-CF @base", + "from": "system", + "setting_id": "GFST02_05", + "instantiation": "true", + "chamber_temperatures": [ + "65" + ], + "counter_coef_2": [ + "0.0003" + ], + "counter_coef_3": [ + "-0.0033" + ], + "counter_limit_min": [ + "-0.0033" + ], + "counter_limit_max": [ + "0.0036" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_change_length": [ + "4" + ], + "hole_coef_2": [ + "-0.0033" + ], + "hole_coef_3": [ + "0.1176" + ], + "hole_limit_min": [ + "0.035" + ], + "hole_limit_max": [ + "0.1176" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL X1E.json index 0b381700e6..16cf559f1b 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @BBL X1E.json @@ -1,121 +1,44 @@ { - "type": "filament", - "name": "Bambu PPS-CF @BBL X1E", - "inherits": "Bambu PPS-CF @base", - "from": "system", - "setting_id": "GFST02_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PPS-CF @BBL X1E", + "inherits": "Bambu PPS-CF @base", + "from": "system", + "setting_id": "GFST02_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json index 3985fcbe02..0a48d3543c 100644 --- a/resources/profiles/BBL/filament/Bambu PPS-CF @base.json +++ b/resources/profiles/BBL/filament/Bambu PPS-CF @base.json @@ -1,42 +1,42 @@ { - "type": "filament", - "name": "Bambu PPS-CF @base", - "inherits": "fdm_filament_pps", - "from": "system", - "filament_id": "OF4RvVuU", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_max_speed": [ - "30" - ], - "filament_cost": [ - "175" - ], - "filament_density": [ - "1.26" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_type": [ - "PPS-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "2.8" - ], - "nozzle_temperature_range_low": [ - "310" - ], - "overhang_fan_threshold": [ - "25%" - ], - "required_nozzle_HRC": [ - "40" - ], - "temperature_vitrification": [ - "220" - ] -} + "type": "filament", + "name": "Bambu PPS-CF @base", + "inherits": "fdm_filament_pps", + "from": "system", + "filament_id": "OF4RvVuU", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "169.32" + ], + "filament_density": [ + "1.26" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PPS-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "2.8" + ], + "nozzle_temperature_range_low": [ + "310" + ], + "overhang_fan_threshold": [ + "25%" + ], + "required_nozzle_HRC": [ + "40" + ], + "temperature_vitrification": [ + "220" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL A1 0.2 nozzle.json index c3fc5949cb..8a3536fec4 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL A1 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PVA @BBL A1 0.2 nozzle", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL A1 0.2 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL A1.json b/resources/profiles/BBL/filament/Bambu PVA @BBL A1.json index 79f6b10740..67809d1d1d 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL A1.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PVA @BBL A1", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL A1", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL A1M 0.2 nozzle.json index e53cb64460..6dccfe59de 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL A1M 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu PVA @BBL A1M 0.2 nozzle", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL A1M 0.2 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL A1M.json b/resources/profiles/BBL/filament/Bambu PVA @BBL A1M.json index 4b6abcbe98..84c4dff149 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL A1M.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Bambu PVA @BBL A1M", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL A1M", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL A2L.json b/resources/profiles/BBL/filament/Bambu PVA @BBL A2L.json index 1738b4cd44..2d44398a94 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL A2L.json @@ -1,55 +1,55 @@ { - "type": "filament", - "name": "Bambu PVA @BBL A2L", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_23", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "240" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL A2L", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_23", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "240" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2C 0.4 nozzle.json index 2de71b03f5..2d3bbc69a2 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2C 0.4 nozzle.json @@ -1,177 +1,99 @@ { - "type": "filament", - "name": "Bambu PVA @BBL H2C 0.4 nozzle", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_17", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PVA @BBL H2C 0.4 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200", + "200" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..9f53d23671 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2C 0.8 nozzle.json @@ -0,0 +1,100 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL H2C 0.8 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_28", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2C.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2C.json index dfe286ab95..6b228e64c4 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2C.json @@ -1,178 +1,99 @@ { - "type": "filament", - "name": "Bambu PVA @BBL H2C", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PVA @BBL H2C", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200", + "200" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..1c80ea9175 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.6 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL H2D 0.6 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_29", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..e2bc140e43 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D 0.8 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL H2D 0.8 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_30", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json index 5ee8e2b854..039a893fcc 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2D.json @@ -1,133 +1,66 @@ { - "type": "filament", - "name": "Bambu PVA @BBL H2D", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL H2D", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..f8e2817dd6 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,70 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL H2DP 0.6 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_31", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..c1f4135e0d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,70 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL H2DP 0.8 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_32", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP.json index f6640bb13a..22a98ea65f 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2DP.json @@ -1,133 +1,58 @@ { - "type": "filament", - "name": "Bambu PVA @BBL H2DP", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PVA @BBL H2DP", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..28f3ae374f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2S 0.6 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL H2S 0.6 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_36", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..840b8da742 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2S 0.8 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL H2S 0.8 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_37", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL H2S.json b/resources/profiles/BBL/filament/Bambu PVA @BBL H2S.json index 99323c95b1..b2f03d3f71 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL H2S.json @@ -1,133 +1,71 @@ { - "type": "filament", - "name": "Bambu PVA @BBL H2S", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_20", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu PVA @BBL H2S", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_20", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL P1P 0.2 nozzle.json index c7e87f6c24..597e2d83ba 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Bambu PVA @BBL P1P 0.2 nozzle", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL P1P 0.2 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL P1P.json b/resources/profiles/BBL/filament/Bambu PVA @BBL P1P.json index 33df6781bc..4c98d516d1 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL P1P.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Bambu PVA @BBL P1P", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL P1P", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..f585aa6396 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL P2S 0.6 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL P2S 0.6 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_33", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..d6782c9504 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL P2S 0.8 nozzle.json @@ -0,0 +1,74 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL P2S 0.8 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_34", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL P2S.json b/resources/profiles/BBL/filament/Bambu PVA @BBL P2S.json index 7b69e1ffaa..dcf65dc1ea 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL P2S.json @@ -1,173 +1,71 @@ { - "type": "filament", - "name": "Bambu PVA @BBL P2S", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_12", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PVA @BBL P2S", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL X1C 0.2 nozzle.json index 8ac8473163..14dca0c469 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL X1C 0.2 nozzle.json @@ -1,122 +1,49 @@ { - "type": "filament", - "name": "Bambu PVA @BBL X1C 0.2 nozzle", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL X1C 0.2 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_01", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu PVA @BBL X1C.json index 335ff38766..c54b3d4ed7 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL X1C.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Bambu PVA @BBL X1C", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PVA @BBL X1C", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_00", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL X2D 0.4 nozzle.json index a23bdf153c..7b8c06759d 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL X2D 0.4 nozzle.json @@ -1,272 +1,93 @@ { - "type": "filament", - "name": "Bambu PVA @BBL X2D 0.4 nozzle", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_08", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PVA @BBL X2D 0.4 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu PVA @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..c12758141f --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL X2D 0.8 nozzle.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "name": "Bambu PVA @BBL X2D 0.8 nozzle", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_35", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu PVA @BBL X2D.json b/resources/profiles/BBL/filament/Bambu PVA @BBL X2D.json index 71151cf8e6..771634beda 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu PVA @BBL X2D.json @@ -1,273 +1,93 @@ { - "type": "filament", - "name": "Bambu PVA @BBL X2D", - "inherits": "Bambu PVA @base", - "from": "system", - "setting_id": "GFSS04_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu PVA @BBL X2D", + "inherits": "Bambu PVA @base", + "from": "system", + "setting_id": "GFSS04_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu PVA @base.json b/resources/profiles/BBL/filament/Bambu PVA @base.json index 1c6e0f2201..327bbf73a1 100644 --- a/resources/profiles/BBL/filament/Bambu PVA @base.json +++ b/resources/profiles/BBL/filament/Bambu PVA @base.json @@ -1,33 +1,33 @@ { - "type": "filament", - "name": "Bambu PVA @base", - "inherits": "fdm_filament_pva", - "from": "system", - "filament_id": "OFzyIxba", - "instantiation": "false", - "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", - "filament_cost": [ - "79.98" - ], - "filament_density": [ - "1.27" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "slow_down_layer_time": [ - "7" - ], - "slow_down_min_speed": [ - "20" - ] -} + "type": "filament", + "name": "Bambu PVA @base", + "inherits": "fdm_filament_pva", + "from": "system", + "filament_id": "OFzyIxba", + "instantiation": "false", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", + "filament_cost": [ + "73.98" + ], + "filament_density": [ + "1.27" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "210" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL A1.json index 4427832ec4..8a477d87ec 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL A1", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_02", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL A1", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json index 9492cfe2fc..957b4d0114 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C 0.4 nozzle.json @@ -1,174 +1,96 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL H2C 0.4 nozzle", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL H2C 0.4 nozzle", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C.json index cfe8734400..2e4b5d0455 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2C.json @@ -1,175 +1,97 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL H2C", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL H2C", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json index c7b5b55465..0b9cf45682 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2D.json @@ -1,130 +1,65 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL H2D", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL H2D", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2DP.json index 4261166266..e1a428af28 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2DP.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL H2DP", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_05", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL H2DP", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2S.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2S.json index dcde393538..eb90486d2c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL H2S.json @@ -1,130 +1,70 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL H2S", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL H2S", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL P2S.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL P2S.json index 496a4c2d57..d8a299efd2 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL P2S.json @@ -1,170 +1,72 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL P2S", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_04", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL P2S", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_04", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json index bdeddb678f..22e7897bfc 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X1C.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL X1C", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_00", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL X1C", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json index 46283ebba8..864a3a15cd 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D 0.4 nozzle.json @@ -1,269 +1,90 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL X2D 0.4 nozzle", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280", - "280", - "280" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL X2D 0.4 nozzle", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D.json index 506c188475..4106ff746d 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @BBL X2D.json @@ -1,270 +1,91 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL X2D", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280", - "280", - "280" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL X2D", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json index 70724ff11f..0f4c717ebd 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PA PET @base.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFMTK0UC", - "instantiation": "false", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", - "fan_cooling_layer_time": [ - "10" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.22" - ], - "filament_is_support": [ - "1" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_adhesiveness_category": [ - "703" - ], + "type": "filament", + "name": "Bambu Support For PA/PET @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFMTK0UC", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "10" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.22" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_adhesiveness_category": [ + "703" + ], "filament_dev_chamber_drying_time": [ "16" ], @@ -42,16 +42,16 @@ "filament_dev_drying_softening_temperature": [ "85" ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "required_nozzle_HRC": [ - "3" - ], - "slow_down_layer_time": [ - "6" - ] -} + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1 0.2 nozzle.json index f860127756..c6bef4c77e 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A1 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A1 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1.json index 09a786b1c5..da962db9cb 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A1", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A1", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json index 811c38f3ef..f02e4de3c2 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A1M 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json index d483afe734..4a73ea4aca 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A1M.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A1M", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A1M", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json index fefb849bb0..5a8c05f41c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.2 nozzle.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A2L 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_23", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "240" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "40" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A2L 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_23", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "240" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "40" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json index 33bc2071f4..42afb75252 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.6 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A2L 0.6 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_32", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A2L 0.6 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_32", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json index fb8f803e75..377e78d044 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L 0.8 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A2L 0.8 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_33", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A2L 0.8 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_33", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L.json index e4435583c1..f616b22b35 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL A2L.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL A2L", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_24", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL A2L", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_24", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json index 725eb7afbf..50022ade4b 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.2 nozzle.json @@ -1,186 +1,97 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2C 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_20", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL H2C 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_20", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json index 7186e97169..c8b6e555c3 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.4 nozzle.json @@ -1,186 +1,108 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2C 0.4 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_21", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA @BBL H2C 0.4 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_21", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..6186fbbfb1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C 0.8 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL H2C 0.8 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_34", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C.json index a98e4e44c6..ccdcb88f8b 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2C.json @@ -1,187 +1,108 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2C", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_22", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA @BBL H2C", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_22", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json index 8d0e7028e2..9ffdfdde10 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.2 nozzle.json @@ -1,140 +1,69 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2D 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL H2D 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..0157469f7b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.6 nozzle.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL H2D 0.6 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_35", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..18f993668b --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D 0.8 nozzle.json @@ -0,0 +1,85 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL H2D 0.8 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_36", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json index 3ff5a8b3c5..224744fbe2 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2D.json @@ -1,142 +1,76 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2D", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL H2D", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.2 nozzle.json index b42223fd66..6d3d64f4e4 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.2 nozzle.json @@ -1,140 +1,69 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2DP 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_17", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL H2DP 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..96927d4949 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,81 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL H2DP 0.6 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_37", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..1790f3dc7e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,81 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL H2DP 0.8 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_38", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP.json index a2e1bdc4f6..ddf96b9502 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2DP.json @@ -1,142 +1,69 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2DP", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA @BBL H2DP", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.2 nozzle.json index c17dd50e41..c3bc4b262f 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.2 nozzle.json @@ -1,140 +1,81 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2S 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL H2S 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..e1a5cabe18 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.6 nozzle.json @@ -0,0 +1,98 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL H2S 0.6 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_39", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..3c6c49d850 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S 0.8 nozzle.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL H2S 0.8 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_40", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S.json index 9545e3d9cb..9a65ce122d 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL H2S.json @@ -1,142 +1,86 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL H2S", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA @BBL H2S", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.2 nozzle.json index 1858c1400d..67d1b7513c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.2 nozzle.json @@ -1,177 +1,78 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL P2S 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL P2S 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..9e64493ce5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.6 nozzle.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL P2S 0.6 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_41", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..2ddb2fd157 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S 0.8 nozzle.json @@ -0,0 +1,80 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL P2S 0.8 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_42", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S.json index a7d8283743..6665caec1e 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL P2S.json @@ -1,173 +1,77 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL P2S", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support For PLA @BBL P2S", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json index 2de6cd45de..74ccf5548c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C 0.2 nozzle.json @@ -1,122 +1,49 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL X1C 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_01", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json index a188f11fcb..a1050cd162 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X1C.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL X1C", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL X1C", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_02", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json index 4a29bf79fe..3876e3f08a 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.2 nozzle.json @@ -1,272 +1,83 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL X2D 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL X2D 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json index 82731fa9e9..f6241c25d3 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.4 nozzle.json @@ -1,278 +1,99 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL X2D 0.4 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support For PLA @BBL X2D 0.4 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..48a9ea046a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D 0.8 nozzle.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA @BBL X2D 0.8 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_43", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D.json b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D.json index 8d3929fed5..50c702e6a4 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @BBL X2D.json @@ -1,273 +1,93 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL X2D", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_19", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support For PLA @BBL X2D", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json index 495291a3cf..aba549b864 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA @base.json @@ -1,31 +1,28 @@ { - "type": "filament", - "name": "Bambu Support For PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFAnyRUI", - "instantiation": "false", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "filament_cost": [ - "69.98" - ], - "filament_density": [ - "1.30" - ], - "filament_is_support": [ - "1" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_adhesiveness_category": [ - "702" + "type": "filament", + "name": "Bambu Support For PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFAnyRUI", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "filament_adhesiveness_category": [ + "702" + ], + "filament_cost": [ + "39.98" + ], + "filament_density": [ + "1.30" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "50" ], "filament_dev_ams_drying_temperature": [ "60", @@ -33,16 +30,19 @@ "50", "50" ], - "filament_dev_ams_drying_heat_distortion_temperature": [ - "50" - ], "filament_dev_drying_softening_temperature": [ "55" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json index 42d6db6223..db0f6ce2f1 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL A1 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_07", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL A1 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_07", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json index decef700d6..e0cb4210a7 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL A1", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_06", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL A1", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_06", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json index 6cf17252db..90920ebe8c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL A1M 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_05", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL A1M 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_05", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json index 05f3bfa985..fcbd1bb645 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL A1M", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_04", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL A1M", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_04", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json index 84b2f49104..a3cd0a70f0 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L 0.2 nozzle.json @@ -1,53 +1,53 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL A2L 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_22", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "210" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "40" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL A2L 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_22", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "210" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L.json index e3d6f909b4..714c839c33 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL A2L.json @@ -1,49 +1,49 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL A2L", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_23", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "210" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL A2L", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_23", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "210" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json index 89b94f0622..00c26d3422 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.2 nozzle.json @@ -1,180 +1,91 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2C 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_19", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "supertack_plate_temp": [ - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2C 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_19", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "supertack_plate_temp": [ + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json index 784fea9e45..4af8d221ba 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.4 nozzle.json @@ -1,180 +1,102 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2C 0.4 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_17", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "supertack_plate_temp": [ - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2C 0.4 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_17", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "supertack_plate_temp": [ + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..9cc5df6520 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C 0.8 nozzle.json @@ -0,0 +1,103 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2C 0.8 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_31", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C.json index 1bbef82d84..bc71874b44 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2C.json @@ -1,181 +1,102 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2C", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_18", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "supertack_plate_temp": [ - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2C", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_18", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json index bdebe07335..600ea2a5e3 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.2 nozzle.json @@ -1,134 +1,60 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2D 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_09", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2D 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_09", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..0b5f655fcb --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.6 nozzle.json @@ -0,0 +1,84 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2D 0.6 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_32", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..38dfd26575 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D 0.8 nozzle.json @@ -0,0 +1,76 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2D 0.8 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_33", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json index 698a644a63..658e24aee0 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2D.json @@ -1,136 +1,73 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2D", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_08", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2D", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_08", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_max_speed": [ + "15" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "220", + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.2 nozzle.json index 31d5651149..ca040b0b4b 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,60 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2DP 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_13", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2DP 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_13", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..2ee8345749 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2DP 0.6 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_39", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..6834cf6a30 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2DP 0.8 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_40", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP.json index ac0a8df2af..3d97fa3d3e 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2DP.json @@ -1,136 +1,60 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2DP", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_12", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2DP", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_12", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.2 nozzle.json index f9183fc382..0279d24189 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.2 nozzle.json @@ -1,134 +1,72 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2S 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_21", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2S 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_21", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..c16fbebfef --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.6 nozzle.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2S 0.6 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_34", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..8bd6e13725 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S 0.8 nozzle.json @@ -0,0 +1,80 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2S 0.8 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_35", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S.json index ad86a460f4..34a50ef5c8 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL H2S.json @@ -1,136 +1,77 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL H2S", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_20", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL H2S", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_20", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json index 9e473560f6..854ab19880 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL P1P 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_03", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL P1P 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_03", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json index 272ea0515d..c2da61c41c 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P1P.json @@ -1,139 +1,74 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL P1P", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_02", - "instantiation": "true", - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL P1P", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_02", + "instantiation": "true", + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.2 nozzle.json index 2a05c968b9..32a5f9cdaa 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.2 nozzle.json @@ -1,171 +1,73 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL P2S 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_11", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL P2S 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_11", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..b080aa58f1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.6 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL P2S 0.6 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_36", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..a1cf1530a4 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S 0.8 nozzle.json @@ -0,0 +1,81 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL P2S 0.8 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_37", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S.json index 53748045b1..880ec62cc8 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL P2S.json @@ -1,173 +1,79 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL P2S", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_10", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL P2S", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_10", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json index cf5d8c5006..d3d09d97a1 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C 0.2 nozzle.json @@ -1,128 +1,63 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL X1C 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_01", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL X1C 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_01", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json index 036657f387..3d6512aa13 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X1C.json @@ -1,136 +1,71 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL X1C", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_00", - "instantiation": "true", - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL X1C", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_00", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json index 75f649146b..10709e5ec1 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.2 nozzle.json @@ -1,275 +1,95 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL X2D 0.2 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_extruder_compatibility": [ - "24" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL X2D 0.2 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_16", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "24" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json index a55c1c8ef3..9e5c65749b 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.4 nozzle.json @@ -1,272 +1,104 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL X2D 0.4 nozzle", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL X2D 0.4 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_14", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..03e8f04d76 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D 0.8 nozzle.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL X2D 0.8 nozzle", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_38", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "60", + "60", + "50", + "50" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D.json index 6acc6ad0bf..9cfbde810a 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @BBL X2D.json @@ -1,273 +1,104 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @BBL X2D", - "inherits": "Bambu Support For PLA/PETG @base", - "from": "system", - "setting_id": "GFSS05_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support For PLA/PETG @BBL X2D", + "inherits": "Bambu Support For PLA/PETG @base", + "from": "system", + "setting_id": "GFSS05_15", + "instantiation": "true", + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json index 6a6ff6aa6b..d4bfb77aab 100644 --- a/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json +++ b/resources/profiles/BBL/filament/Bambu Support For PLA-PETG @base.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Bambu Support For PLA/PETG @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFIfnzxC", - "instantiation": "false", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "69.98" - ], - "filament_density": [ - "1.19" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_adhesiveness_category": [ - "705" + "type": "filament", + "name": "Bambu Support For PLA/PETG @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFIfnzxC", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "63.98" + ], + "filament_density": [ + "1.19" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_adhesiveness_category": [ + "705" ], "filament_dev_chamber_drying_bed_temperature": [ "80" @@ -47,29 +47,29 @@ ], "filament_dev_drying_softening_temperature": [ "55" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "slow_down_layer_time": [ - "8" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ] -} + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "8" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support G @BBL A1.json index a2e728b26c..bb28afc0fa 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Bambu Support G @BBL A1", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_01", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL A1", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2C 0.4 nozzle.json index 00c4001de7..bd669dd7ca 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2C 0.4 nozzle.json @@ -1,174 +1,96 @@ { - "type": "filament", - "name": "Bambu Support G @BBL H2C 0.4 nozzle", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL H2C 0.4 nozzle", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2C.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2C.json index 8237c4f297..6796582027 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2C.json @@ -1,175 +1,97 @@ { - "type": "filament", - "name": "Bambu Support G @BBL H2C", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL H2C", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json index 0b8d4a1ffd..bf5156f0d6 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2D.json @@ -1,130 +1,65 @@ { - "type": "filament", - "name": "Bambu Support G @BBL H2D", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL H2D", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2DP.json index a20e1599d4..b95357fd32 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2DP.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Bambu Support G @BBL H2DP", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL H2DP", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "retraction_distances_when_ec": [ + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL H2S.json b/resources/profiles/BBL/filament/Bambu Support G @BBL H2S.json index f7a1d459de..18617a17dc 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL H2S.json @@ -1,130 +1,70 @@ { - "type": "filament", - "name": "Bambu Support G @BBL H2S", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL H2S", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL P2S.json b/resources/profiles/BBL/filament/Bambu Support G @BBL P2S.json index 848c02a81c..37046fc70b 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL P2S.json @@ -1,167 +1,67 @@ { - "type": "filament", - "name": "Bambu Support G @BBL P2S", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL P2S", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json index 273f0cde20..bbb6df001d 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1C.json @@ -1,127 +1,54 @@ { - "type": "filament", - "name": "Bambu Support G @BBL X1C", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL X1C", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json index 9baf0de057..4672cda4c0 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X1E.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Bambu Support G @BBL X1E", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_00", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL X1E", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X2D 0.4 nozzle.json index 4238d60d8e..b9e3ff0c56 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Bambu Support G @BBL X2D 0.4 nozzle", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280", - "280", - "280" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL X2D 0.4 nozzle", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @BBL X2D.json b/resources/profiles/BBL/filament/Bambu Support G @BBL X2D.json index 5da2ec0c7c..99748688e1 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu Support G @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Bambu Support G @BBL X2D", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280", - "280", - "280" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL X2D", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support G @base.json b/resources/profiles/BBL/filament/Bambu Support G @base.json index 38c7f500f5..7cf9fc5ca1 100644 --- a/resources/profiles/BBL/filament/Bambu Support G @base.json +++ b/resources/profiles/BBL/filament/Bambu Support G @base.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Bambu Support G @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFQHiNJs", - "instantiation": "false", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", - "fan_cooling_layer_time": [ - "10" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.22" - ], - "filament_is_support": [ - "1" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_adhesiveness_category": [ - "701" + "type": "filament", + "name": "Bambu Support G @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFQHiNJs", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_cooling_layer_time": [ + "10" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.22" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_adhesiveness_category": [ + "701" ], "filament_dev_chamber_drying_time": [ "16" @@ -41,17 +41,17 @@ ], "filament_dev_drying_softening_temperature": [ "85" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "required_nozzle_HRC": [ - "3" - ], - "slow_down_layer_time": [ - "6" - ] -} + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1 0.2 nozzle.json index c921528678..6dfc9bf96e 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu Support W @BBL A1 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL A1 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1.json index 55e6b7ea0a..b5c4e7b7f8 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu Support W @BBL A1", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL A1", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json index e85ec02e3a..96c226d8e0 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu Support W @BBL A1M 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL A1M 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json index 5c870fd292..51efafdccf 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A1M.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu Support W @BBL A1M", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL A1M", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A2L 0.2 nozzle.json index 74810aaeb7..01b6abe4e7 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A2L 0.2 nozzle.json @@ -1,56 +1,56 @@ { - "type": "filament", - "name": "Bambu Support W @BBL A2L 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_20", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "240" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "40" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL A2L 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_20", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "240" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "40" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL A2L.json b/resources/profiles/BBL/filament/Bambu Support W @BBL A2L.json index 64e2cbb5d3..7d52265879 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL A2L.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Bambu Support W @BBL A2L", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_21", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "220" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL A2L", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_21", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "220" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.2 nozzle.json index 2a9e1eb28a..f2a1dd4faa 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.2 nozzle.json @@ -1,180 +1,91 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2C 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_19", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2C 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.4 nozzle.json index e84c9efefa..a141e719b8 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2C 0.4 nozzle.json @@ -1,180 +1,102 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2C 0.4 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_17", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2C 0.4 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2C.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2C.json index cfd8dcf4b2..5b448140c8 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2C.json @@ -1,181 +1,103 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2C", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "supertack_plate_temp": [ - "40" - ], - "supertack_plate_temp_initial_layer": [ - "40" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2C", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json index fcd2d7d52b..8651d60951 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D 0.2 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2D 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2D 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json index b752b636e9..bbab8a9b04 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2D.json @@ -1,136 +1,72 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2D", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2D", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP 0.2 nozzle.json index 7b1d2cba34..5d2410e4c4 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP 0.2 nozzle.json @@ -1,134 +1,63 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2DP 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2DP 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP.json index 20163bae32..82807fa583 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2DP.json @@ -1,136 +1,65 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2DP", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2DP", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2S 0.2 nozzle.json index 5e0f2e54b7..0c9ad96894 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2S 0.2 nozzle.json @@ -1,140 +1,85 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2S 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2S 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL H2S.json b/resources/profiles/BBL/filament/Bambu Support W @BBL H2S.json index 30f2947e0c..e1bb915584 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL H2S.json @@ -1,142 +1,93 @@ { - "type": "filament", - "name": "Bambu Support W @BBL H2S", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL H2S", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL P2S 0.2 nozzle.json index af8729821d..336cca1ec8 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL P2S 0.2 nozzle.json @@ -1,171 +1,72 @@ { - "type": "filament", - "name": "Bambu Support W @BBL P2S 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL P2S 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL P2S.json b/resources/profiles/BBL/filament/Bambu Support W @BBL P2S.json index 829856bd84..077265db71 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL P2S.json @@ -1,173 +1,79 @@ { - "type": "filament", - "name": "Bambu Support W @BBL P2S", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_12", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL P2S", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "supertack_plate_temp": [ + "40" + ], + "supertack_plate_temp_initial_layer": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json index 096cd6fa5a..520d5cd793 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu Support W @BBL X1", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL X1", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS02", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json index 57385b560c..4f2b3f0120 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C 0.2 nozzle.json @@ -1,122 +1,49 @@ { - "type": "filament", - "name": "Bambu Support W @BBL X1C 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL X1C 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_00", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json index 0d27ffda6c..92e8ea9022 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X1C.json @@ -1,127 +1,54 @@ { - "type": "filament", - "name": "Bambu Support W @BBL X1C", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL X1C", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.2 nozzle.json index 45979d042a..1154670bd3 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.2 nozzle.json @@ -1,272 +1,83 @@ { - "type": "filament", - "name": "Bambu Support W @BBL X2D 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL X2D 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.4 nozzle.json index 3bc7956c2d..97599b236c 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X2D 0.4 nozzle.json @@ -1,272 +1,93 @@ { - "type": "filament", - "name": "Bambu Support W @BBL X2D 0.4 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL X2D 0.4 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @BBL X2D.json b/resources/profiles/BBL/filament/Bambu Support W @BBL X2D.json index c51b414b40..8146c61633 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu Support W @BBL X2D.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Bambu Support W @BBL X2D", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_11", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL X2D", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_11", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support W @base.json b/resources/profiles/BBL/filament/Bambu Support W @base.json index 1391587ef0..da7a2e7591 100644 --- a/resources/profiles/BBL/filament/Bambu Support W @base.json +++ b/resources/profiles/BBL/filament/Bambu Support W @base.json @@ -1,39 +1,39 @@ { - "type": "filament", - "name": "Bambu Support W @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFsHSVZc", - "instantiation": "false", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "filament_cost": [ - "69.98" - ], - "filament_density": [ - "1.30" - ], - "filament_is_support": [ - "1" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_adhesiveness_category": [ - "700" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Bambu Support W @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFsHSVZc", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "filament_cost": [ + "69.98" + ], + "filament_density": [ + "1.30" + ], + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_adhesiveness_category": [ + "700" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json index 2a4de54a1a..52655bf9fb 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL A1", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_01", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support for ABS @BBL A1", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_01", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json index 0466c80f16..99b5ef2be7 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C 0.4 nozzle.json @@ -1,174 +1,86 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL H2C 0.4 nozzle", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support for ABS @BBL H2C 0.4 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..db205f0769 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C 0.8 nozzle.json @@ -0,0 +1,89 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL H2C 0.8 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_14", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "75" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C.json index 3760f214ee..554ffa9475 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2C.json @@ -1,175 +1,86 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL H2C", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support for ABS @BBL H2C", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..26caca6e30 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D 0.6 nozzle.json @@ -0,0 +1,70 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL H2D 0.6 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_15", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..f0106252de --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D 0.8 nozzle.json @@ -0,0 +1,63 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL H2D 0.8 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_16", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json index 1e83ac14fa..a2e8f70d1f 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2D.json @@ -1,130 +1,53 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL H2D", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu Support for ABS @BBL H2D", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..34ea19621a --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL H2DP 0.6 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_17", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..3537f29325 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL H2DP 0.8 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_18", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP.json index f611960602..fd1f329f0d 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2DP.json @@ -1,130 +1,47 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL H2DP", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support for ABS @BBL H2DP", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..bf0fc86691 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S 0.6 nozzle.json @@ -0,0 +1,75 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL H2S 0.6 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_19", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..fc939c2ddc --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S 0.8 nozzle.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL H2S 0.8 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_20", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S.json index 03cde4ad6f..64bca9215d 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL H2S.json @@ -1,130 +1,63 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL H2S", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu Support for ABS @BBL H2S", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..1f48d62041 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S 0.6 nozzle.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL P2S 0.6 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_21", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..95161a1a3e --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S 0.8 nozzle.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL P2S 0.8 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_22", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S.json index 95e1c6d602..bc11aaa193 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL P2S.json @@ -1,170 +1,70 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL P2S", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_03", - "instantiation": "true", - "activate_air_filtration": [ - "0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support for ABS @BBL P2S", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_03", + "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json index 2c3c1a543c..5ee757619a 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X1C.json @@ -1,133 +1,64 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL X1C", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support for ABS @BBL X1C", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_00", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json index 89e8556c2f..0882985ee0 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D 0.4 nozzle.json @@ -1,266 +1,95 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL X2D 0.4 nozzle", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support for ABS @BBL X2D 0.4 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..0e52093caa --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D 0.8 nozzle.json @@ -0,0 +1,95 @@ +{ + "type": "filament", + "name": "Bambu Support for ABS @BBL X2D 0.8 nozzle", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_23", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "4", + "12", + "4" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D.json b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D.json index a9fae6e28f..c5de9aa8ef 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @BBL X2D.json @@ -1,267 +1,95 @@ { - "type": "filament", - "name": "Bambu Support for ABS @BBL X2D", - "inherits": "Bambu Support for ABS @base", - "from": "system", - "setting_id": "GFSS06_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu Support for ABS @BBL X2D", + "inherits": "Bambu Support for ABS @base", + "from": "system", + "setting_id": "GFSS06_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json index 25f62a07c3..18400b5404 100644 --- a/resources/profiles/BBL/filament/Bambu Support for ABS @base.json +++ b/resources/profiles/BBL/filament/Bambu Support for ABS @base.json @@ -1,48 +1,48 @@ { - "type": "filament", - "name": "Bambu Support for ABS @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFf6mfQO", - "instantiation": "false", - "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", - "fan_max_speed": [ - "30" - ], - "filament_cost": [ - "29.98" - ], - "filament_density": [ - "1.16" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "filament_adhesiveness_category": [ - "706" + "type": "filament", + "name": "Bambu Support for ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFf6mfQO", + "instantiation": "false", + "description": "This is a non-water-soluble support filament, and usually it is only for the support structure and not for the model body. To get better printing quality, please refer to this wiki: Printing Tips for Support Filament and Support Function.", + "fan_max_speed": [ + "30" + ], + "filament_adhesiveness_category": [ + "706" + ], + "filament_cost": [ + "23.98" + ], + "filament_density": [ + "1.16" ], "filament_dev_ams_drying_time": [ "12", "4", "12", "4" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "90" - ] -} + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "90" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json index 160b3cd5b9..05d3bf0141 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.6 nozzle.json @@ -1,77 +1,77 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL A2L 0.6 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_18", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10" - ], - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_pre_cooling_temperature": [ - "195" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "20" - ], - "filament_ramming_volumetric_speed": [ - "0.55" - ], - "filament_retraction_length": [ - "1.3" - ], - "filament_support_printable": [ - "2" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL A2L 0.6 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_18", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_pre_cooling_temperature": [ + "195" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "20" + ], + "filament_ramming_volumetric_speed": [ + "0.55" + ], + "filament_retraction_length": [ + "1.3" + ], + "filament_support_printable": [ + "2" + ], + "impact_strength_z": [ + "88.7" + ], + "long_retractions_when_ec": [ + "1" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "pre_start_fan_time": [ + "0" + ], + "retraction_distances_when_ec": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json index bf04a2f638..9f80ff8060 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL A2L 0.8 nozzle.json @@ -1,80 +1,80 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL A2L 0.8 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10" - ], - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_pre_cooling_temperature": [ - "195" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "20" - ], - "filament_ramming_volumetric_speed": [ - "0.55" - ], - "filament_retraction_length": [ - "1" - ], - "filament_support_printable": [ - "2" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1" - ], - "nozzle_temperature": [ - "215" - ], - "nozzle_temperature_initial_layer": [ - "215" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "pre_start_fan_time": [ - "0" - ], - "retraction_distances_when_ec": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL A2L 0.8 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_pre_cooling_temperature": [ + "195" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "20" + ], + "filament_ramming_volumetric_speed": [ + "0.55" + ], + "filament_retraction_length": [ + "1" + ], + "filament_support_printable": [ + "2" + ], + "impact_strength_z": [ + "88.7" + ], + "long_retractions_when_ec": [ + "1" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "pre_start_fan_time": [ + "0" + ], + "retraction_distances_when_ec": [ + "10" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2C.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2C.json index c9c84d7b30..50da178634 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2C.json @@ -1,199 +1,151 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2C", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_05", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.2", - "2.2" - ], - "filament_ramming_volumetric_speed": [ - "0.55", - "0.55" - ], - "filament_ramming_volumetric_speed_nc": [ - "0.55", - "0.55" - ], - "filament_printable": [ - "2" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "195", - "195" - ], - "filament_pre_cooling_temperature_nc": [ - "185", - "185" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "impact_strength_z": [ - "88.7" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2C", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_05", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.2", + "2.2", + "2.2" + ], + "filament_ramming_volumetric_speed": [ + "0.55", + "0.55", + "0.55" + ], + "filament_ramming_volumetric_speed_nc": [ + "0.55", + "0.55", + "0.55" + ], + "filament_printable": [ + "2" + ], + "filament_retraction_length": [ + "1", + "1", + "1" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "185", + "185", + "185" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "impact_strength_z": [ + "88.7" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D 0.4 nozzle.json index 635ab2556c..4a4cfb2e1e 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D 0.4 nozzle.json @@ -1,101 +1,116 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2D 0.4 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10" - ], - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "50" - ], - "filament_extruder_variant": [ - "Direct Drive TPU High Flow" - ], - "filament_flow_ratio": [ - "1.1" - ], - "filament_long_retractions_when_cut": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2.5" - ], - "filament_pre_cooling_temperature": [ - "195" - ], - "filament_printable": [ - "2" - ], - "filament_ramming_travel_time": [ - "20" - ], - "filament_ramming_volumetric_speed": [ - "0.55" - ], - "filament_retraction_length": [ - "2.3" - ], - "filament_retraction_speed": [ - "20" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.6" - ], - "filament_z_hop_types": [ - "Auto Lift" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2D 0.4 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_17", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_extruder_variant": [ + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_long_retractions_when_cut": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2.5" + ], + "filament_overhang_2_4_speed": [ + "25" + ], + "filament_overhang_3_4_speed": [ + "25" + ], + "filament_overhang_4_4_speed": [ + "20" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_pre_cooling_temperature": [ + "195" + ], + "filament_printable": [ + "2" + ], + "filament_ramming_travel_time": [ + "20" + ], + "filament_ramming_volumetric_speed": [ + "0.55" + ], + "filament_retraction_length": [ + "2.3" + ], + "filament_retraction_speed": [ + "20" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.6" + ], + "filament_z_hop_types": [ + "Auto Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "long_retractions_when_ec": [ + "1" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "override_process_overhang_speed": [ + "1" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json index 7a35448013..a1c364a9ec 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2D.json @@ -1,171 +1,291 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2D", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_02", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "50" - ], - "filament_flow_ratio": [ - "1", - "1", - "1.03" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.2", - "2.2", - "4.8" - ], - "filament_ramming_volumetric_speed": [ - "0.55", - "0.55", - "0.55" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "2.3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "40" - ], - "filament_wipe": [ - "nil", - "nil", - "1" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "0.4" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Auto Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "195", - "195", - "195" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "225", - "225", - "235" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2D", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_02", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "25", + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "50", + "10" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1.03", + "1" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "2.2", + "2.2", + "4.8", + "2.2" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "25", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "25", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "20", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "25", + "10" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_printable": [ + "2" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "0.55", + "0.55", + "0.55", + "0.55" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "2", + "2", + "2.3", + "2" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "40", + "10" + ], + "filament_wipe": [ + "nil", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "1", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "0.4", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "Auto Lift", + "nil" + ], + "impact_strength_z": [ + "88.7" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "225", + "225", + "235", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "235", + "225" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "40", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP 0.4 nozzle.json index ff23d0e23b..8834843065 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP 0.4 nozzle.json @@ -1,101 +1,116 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2DP 0.4 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_20", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10" - ], - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "50" - ], - "filament_extruder_variant": [ - "Direct Drive TPU High Flow" - ], - "filament_flow_ratio": [ - "1.1" - ], - "filament_long_retractions_when_cut": [ - "0" - ], - "filament_max_volumetric_speed": [ - "2.5" - ], - "filament_pre_cooling_temperature": [ - "195" - ], - "filament_printable": [ - "2" - ], - "filament_ramming_travel_time": [ - "20" - ], - "filament_ramming_volumetric_speed": [ - "0.55" - ], - "filament_retraction_length": [ - "2.3" - ], - "filament_retraction_speed": [ - "20" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.6" - ], - "filament_z_hop_types": [ - "Auto Lift" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2DP 0.4 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_20", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_extruder_variant": [ + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_long_retractions_when_cut": [ + "0" + ], + "filament_max_volumetric_speed": [ + "2.5" + ], + "filament_overhang_2_4_speed": [ + "25" + ], + "filament_overhang_3_4_speed": [ + "25" + ], + "filament_overhang_4_4_speed": [ + "20" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "filament_pre_cooling_temperature": [ + "195" + ], + "filament_printable": [ + "2" + ], + "filament_ramming_travel_time": [ + "20" + ], + "filament_ramming_volumetric_speed": [ + "0.55" + ], + "filament_retraction_length": [ + "2.3" + ], + "filament_retraction_speed": [ + "20" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.6" + ], + "filament_z_hop_types": [ + "Auto Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "long_retractions_when_ec": [ + "1" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "override_process_overhang_speed": [ + "1" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP.json index eda8e4f60e..5afdd55df6 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2DP.json @@ -1,171 +1,249 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2DP", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_03", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "50" - ], - "filament_flow_ratio": [ - "1", - "1", - "1.03" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.2", - "2.2", - "4.8" - ], - "filament_ramming_volumetric_speed": [ - "0.55", - "0.55", - "0.55" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "2.3" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "40" - ], - "filament_wipe": [ - "nil", - "nil", - "1" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "0.4" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Auto Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "195", - "195", - "195" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "225", - "225", - "235" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2DP", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_03", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "50" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1.03" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "2.2", + "2.2", + "4.8" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "25" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "25" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "20" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "25" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0" + ], + "filament_printable": [ + "2" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "0.55", + "0.55", + "0.55" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "2", + "2", + "2.3" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "40" + ], + "filament_wipe": [ + "nil", + "nil", + "1" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "1" + ], + "filament_z_hop": [ + "nil", + "nil", + "0.4" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "Auto Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "225", + "225", + "235" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "235" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "40" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.6 nozzle.json index 608802a6a2..493fb2004d 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.6 nozzle.json @@ -1,168 +1,115 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2S 0.6 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_8", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_ramming_volumetric_speed": [ - "0.55", - "0.55" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_for_layer_cooling": [ - "0" - ], - "volumetric_speed_coefficients": [ - "12.4717 -2.8601 9.7830 2.9503 3.9235 -1.8644", - "12.4717 -2.8601 9.7830 2.9503 3.9235 -1.8644" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2S 0.6 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_8", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_ramming_volumetric_speed": [ + "0.55", + "0.55", + "0.55" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_for_layer_cooling": [ + "0" + ], + "volumetric_speed_coefficients": [ + "12.4717 -2.8601 9.7830 2.9503 3.9235 -1.8644", + "12.4717 -2.8601 9.7830 2.9503 3.9235 -1.8644", + "12.4717 -2.8601 9.7830 2.9503 3.9235 -1.8644" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.8 nozzle.json index 257d518996..b39cbdfe34 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S 0.8 nozzle.json @@ -1,140 +1,99 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2S 0.8 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_9", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "5", - "5" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_ramming_volumetric_speed": [ - "0.55", - "0.55" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "5", - "5" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_for_layer_cooling": [ - "0" - ], - "volumetric_speed_coefficients": [ - "6.6221 -1.8351 5.4532 2.6077 3.1996 -1.9564", - "6.6221 -1.8351 5.4532 2.6077 3.1996 -1.9564" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2S 0.8 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_9", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_deretraction_speed": [ + "5", + "5" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3", + "3" + ], + "filament_ramming_volumetric_speed": [ + "0.55", + "0.55" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "filament_retraction_speed": [ + "5", + "5" + ], + "filament_wipe": [ + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_for_layer_cooling": [ + "0" + ], + "volumetric_speed_coefficients": [ + "6.6221 -1.8351 5.4532 2.6077 3.1996 -1.9564", + "6.6221 -1.8351 5.4532 2.6077 3.1996 -1.9564" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S.json index 8ccd07d3c8..32401c7021 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL H2S.json @@ -1,140 +1,117 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL H2S", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_ramming_volumetric_speed": [ - "0.55", - "0.55" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "30" - ], - "volumetric_speed_coefficients": [ - "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920", - "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL H2S", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_ramming_volumetric_speed": [ + "0.55", + "0.55", + "0.55" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "30", + "30", + "30" + ], + "volumetric_speed_coefficients": [ + "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920", + "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920", + "-72.1736 -8.8086 10.6201 29.6592 9.9286 -3.3920" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P1P.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P1P.json index fbdfb1d84e..61a640f9f4 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P1P.json @@ -1,120 +1,47 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL P1P", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2.2", - "2.2" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL P1P", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2.2", + "2.2" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json index 860a2da6b9..b2ee2d8b7c 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S 0.8 nozzle.json @@ -1,168 +1,57 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL P2S 0.8 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_10", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.2", - "2.2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1.2", - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL P2S 0.8 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_10", + "instantiation": "true", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.2", + "2.2" + ], + "filament_prime_volume": [ + "60" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json index 7c139e896c..44fd0998eb 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL P2S.json @@ -1,168 +1,68 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL P2S", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_06", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.2", - "2.2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL P2S", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_06", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.2", + "2.2", + "2.2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "1", + "1" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X1C.json index 41d325d219..b24ff17409 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X1C.json @@ -1,126 +1,53 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL X1C", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2.2", - "2.2" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL X1C", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2.2", + "2.2" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json index 0bde7eb2e4..eb47c12591 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D 0.8 nozzle.json @@ -1,278 +1,83 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL X2D 0.8 nozzle", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_21", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "1.2", - "1.2", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.2", - "2.2", - "2.2", - "2.2" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "225" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "225", - "225", - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "225", - "225" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL X2D 0.8 nozzle", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_21", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.2", + "2.2", + "2.2", + "2.2" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "225" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "225", + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D.json b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D.json index df1e421aad..69367399c0 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @BBL X2D.json @@ -1,278 +1,107 @@ { - "type": "filament", - "name": "Bambu TPU 85A @BBL X2D", - "inherits": "Bambu TPU 85A @base", - "from": "system", - "setting_id": "GFSU04_04", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "200", - "200", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.2", - "2.2", - "2.2", - "2.2" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "225" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "225", - "225", - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "225", - "225" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @BBL X2D", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "GFSU04_04", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.2", + "2.2", + "2.2", + "2.2", + "2.2", + "2.2" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "2", + "2", + "2", + "0.4", + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "200", + "200", + "200", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "225" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "225", + "225", + "225", + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 85A @base.json b/resources/profiles/BBL/filament/Bambu TPU 85A @base.json index fc7f67bc45..d38f1b3da6 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 85A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 85A @base.json @@ -1,33 +1,33 @@ { - "type": "filament", - "name": "Bambu TPU 85A @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFlfuj2k", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "44.99" - ], - "filament_density": [ - "1.18" - ], - "filament_max_volumetric_speed": [ - "2.2" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "nozzle_temperature": [ - "225" - ], - "nozzle_temperature_initial_layer": [ - "225" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "slow_down_layer_time": [ - "20" - ] -} + "type": "filament", + "name": "Bambu TPU 85A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFlfuj2k", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.18" + ], + "filament_max_volumetric_speed": [ + "2.2" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "slow_down_layer_time": [ + "20" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1.json index 71f9bc7bd8..72beca2f7b 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL A1", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_04", - "instantiation": "true", - "filament_density": [ - "1.22" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL A1", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_04", + "instantiation": "true", + "filament_density": [ + "1.22" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1M.json index 7e86089fbb..0aca42745f 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A1M.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL A1M", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_05", - "instantiation": "true", - "filament_density": [ - "1.22" - ], - "hot_plate_temp": [ - "30" - ], - "hot_plate_temp_initial_layer": [ - "30" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "textured_plate_temp": [ - "30" - ], - "textured_plate_temp_initial_layer": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL A1M", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_05", + "instantiation": "true", + "filament_density": [ + "1.22" + ], + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json index a3097b65c0..a9e2cf1890 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.6 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL A2L 0.6 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_28", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.22" - ], - "filament_max_volumetric_speed": [ - "4.5" - ], - "filament_overhang_totally_speed": [ - "20" - ], - "filament_retraction_length": [ - "0.8" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_min_speed": [ - "25" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL A2L 0.6 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_28", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "4.5" + ], + "filament_overhang_totally_speed": [ + "20" + ], + "filament_retraction_length": [ + "0.8" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "25" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json index 8d6283b83d..fa6f028ab6 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L 0.8 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL A2L 0.8 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_32", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.22" - ], - "filament_max_volumetric_speed": [ - "4.5" - ], - "filament_overhang_totally_speed": [ - "25" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature": [ - "205" - ], - "nozzle_temperature_initial_layer": [ - "205" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL A2L 0.8 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_32", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "4.5" + ], + "filament_overhang_totally_speed": [ + "25" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L.json index 7e2c12fdca..c05d4c9aea 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL A2L.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL A2L", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_12", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_density": [ - "1.22" - ], - "filament_retraction_length": [ - "1" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_min_speed": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL A2L", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_12", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_density": [ + "1.22" + ], + "filament_retraction_length": [ + "1" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json index 621055a250..9a41e06a29 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C 0.4 nozzle.json @@ -1,195 +1,152 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2C 0.4 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7" - ], - "filament_ramming_volumetric_speed_nc": [ - "0.7", - "0.7" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "195", - "195" - ], - "filament_pre_cooling_temperature_nc": [ - "185", - "185" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "impact_strength_z": [ - "88.7" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "30", - "30" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2C 0.4 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7" + ], + "filament_ramming_volumetric_speed_nc": [ + "0.7", + "0.7", + "0.7" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "185", + "185", + "185" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "impact_strength_z": [ + "88.7" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "30", + "30", + "30" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C.json index d96ebeb009..28f6778d20 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2C.json @@ -1,196 +1,153 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2C", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7" - ], - "filament_ramming_volumetric_speed_nc": [ - "0.7", - "0.7" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "195", - "195" - ], - "filament_pre_cooling_temperature_nc": [ - "185", - "185" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "impact_strength_z": [ - "88.7" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2C", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7" + ], + "filament_ramming_volumetric_speed_nc": [ + "0.7", + "0.7", + "0.7" + ], + "filament_retraction_length": [ + "1", + "1", + "1" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "185", + "185", + "185" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "impact_strength_z": [ + "88.7" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.6 nozzle.json index 2efb672844..feb9db8a13 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.6 nozzle.json @@ -1,205 +1,290 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2D 0.6 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_24", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "25", - "25", - "30" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_flow_ratio": [ - "1.05", - "1.05", - "1.08" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8", - "5.6" - ], - "filament_pre_cooling_temperature": [ - "195", - "195", - "195" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10", - "10" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7", - "0.7" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.6", - "0.6", - "1.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "30" - ], - "filament_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "225", - "225", - "220" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "220" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "25", - "25", - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2D 0.6 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_24", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "25", + "25", + "30", + "25" + ], + "filament_flow_ratio": [ + "1.05", + "1.05", + "1.08", + "1.05" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "5.6", + "2.8" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7", + "0.7" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "0.6", + "0.6", + "1.8", + "0.6" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "30", + "10" + ], + "filament_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "30", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "30", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "30", + "10" + ], + "filament_bridge_speed": [ + "25", + "25", + "30", + "25" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "impact_strength_z": [ + "88.7" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature": [ + "225", + "225", + "220", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "220", + "225" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "25", + "25", + "50", + "25" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.8 nozzle.json index 347b10121c..b1a45e6d9a 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D 0.8 nozzle.json @@ -1,171 +1,94 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2D 0.8 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_26", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "25", - "25" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "1.05", - "1.05" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_pre_cooling_temperature": [ - "195", - "195" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.2", - "0.2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "25", - "25" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2D 0.8 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_26", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "25", + "25" + ], + "filament_flow_ratio": [ + "1.05", + "1.05" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8" + ], + "filament_pre_cooling_temperature": [ + "195", + "195" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7" + ], + "filament_retraction_length": [ + "0.2", + "0.2" + ], + "filament_retraction_speed": [ + "10", + "10" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "25", + "25" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json index e51fc63586..f2d39bc05c 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2D.json @@ -1,170 +1,290 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2D", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_02", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "30" - ], - "filament_flow_ratio": [ - "1", - "1", - "1.05" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8", - "5.6" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7", - "0.7" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "2.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "30" - ], - "filament_wipe": [ - "nil", - "nil", - "1" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "2" - ], - "filament_z_hop": [ - "nil", - "nil", - "0.4" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Slope Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "195", - "195", - "195" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "225", - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "225" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2D", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_02", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "30", + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_cost": [ + "38.99" + ], + "filament_deretraction_speed": [ + "25", + "25", + "30", + "25" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1.05", + "1" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "5.6", + "2.8" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "30", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "30", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "30", + "10" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7", + "0.7" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "2.8", + "1.5" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "30", + "10" + ], + "filament_wipe": [ + "nil", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "2", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "0.4", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Slope Lift", + "Spiral Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "225", + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "25", + "25", + "50", + "25" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.6 nozzle.json index 8fee266af3..cb24fbdbdd 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.6 nozzle.json @@ -1,205 +1,248 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2DP 0.6 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_25", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "25", - "25", - "30" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_flow_ratio": [ - "1.05", - "1.05", - "1.08" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8", - "5.6" - ], - "filament_pre_cooling_temperature": [ - "195", - "195", - "195" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10", - "10" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7", - "0.7" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.6", - "0.6", - "1.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "30" - ], - "filament_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Spiral Lift" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "225", - "225", - "220" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "220" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "25", - "25", - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2DP 0.6 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_25", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "25", + "25", + "30" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1.05", + "1.05", + "1.08" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "5.6" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "30" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "30" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "30" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "0.6", + "0.6", + "1.8" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "30" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "225", + "225", + "220" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "25", + "25", + "50" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.8 nozzle.json index bc2728217d..6f8fc61c4e 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP 0.8 nozzle.json @@ -1,171 +1,94 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2DP 0.8 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_27", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "25", - "25" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "1.05", - "1.05" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_pre_cooling_temperature": [ - "195", - "195" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_preheat_temperature_delta": [ - "10", - "10" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.2", - "0.2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "25", - "25" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2DP 0.8 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_27", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "25", + "25" + ], + "filament_flow_ratio": [ + "1.05", + "1.05" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8" + ], + "filament_pre_cooling_temperature": [ + "195", + "195" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7" + ], + "filament_retraction_length": [ + "0.2", + "0.2" + ], + "filament_retraction_speed": [ + "10", + "10" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "25", + "25" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP.json index 52c6c8e3c8..a77efbc6d7 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2DP.json @@ -1,170 +1,248 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2DP", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_03", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "30" - ], - "filament_flow_ratio": [ - "1", - "1", - "1.05" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8", - "5.6" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7", - "0.7" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "2.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "30" - ], - "filament_wipe": [ - "nil", - "nil", - "1" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "2" - ], - "filament_z_hop": [ - "nil", - "nil", - "0.4" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Slope Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "195", - "195", - "195" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "impact_strength_z": [ - "88.7" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "225", - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "225" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2DP", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_03", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_cost": [ + "38.99" + ], + "filament_deretraction_speed": [ + "25", + "25", + "30" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1.05" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "5.6" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "30" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "30" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "30" + ], + "filament_pre_cooling_temperature": [ + "195", + "195", + "195" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "1.5", + "1.5", + "2.8" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "30" + ], + "filament_wipe": [ + "nil", + "nil", + "1" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "2" + ], + "filament_z_hop": [ + "nil", + "nil", + "0.4" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Slope Lift" + ], + "impact_strength_z": [ + "88.7" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "25", + "25", + "50" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.6 nozzle.json index ae9da2933e..c56c11ff05 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.6 nozzle.json @@ -1,140 +1,107 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2S 0.6 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "5.6", - "5.6" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_for_layer_cooling": [ - "0" - ], - "volumetric_speed_coefficients": [ - "85.1441 -0.1306 48.4938 -43.6862 -5.8088 5.5653", - "85.1441 -0.1306 48.4938 -43.6862 -5.8088 5.5653" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2S 0.6 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_13", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5.6", + "5.6", + "5.6" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7" + ], + "filament_retraction_length": [ + "1", + "1", + "1" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "30", + "30", + "30" + ], + "volumetric_speed_coefficients": [ + "85.1441 -0.1306 48.4938 -43.6862 -5.8088 5.5653", + "85.1441 -0.1306 48.4938 -43.6862 -5.8088 5.5653", + "85.1441 -0.1306 48.4938 -43.6862 -5.8088 5.5653" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.8 nozzle.json index 8b4a090877..d6358536a6 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S 0.8 nozzle.json @@ -1,140 +1,95 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2S 0.8 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "5", - "5" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "5.6", - "5.6" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "5", - "5" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_for_layer_cooling": [ - "0" - ], - "volumetric_speed_coefficients": [ - "48.0137 -0.3915 27.3862 -32.3779 -3.9738 5.2809", - "48.0137 -0.3915 27.3862 -32.3779 -3.9738 5.2809" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2S 0.8 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5.6", + "5.6" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7" + ], + "filament_retraction_length": [ + "0.6", + "0.6" + ], + "filament_retraction_speed": [ + "10", + "10" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "18" + ], + "slow_down_min_speed": [ + "12", + "12" + ], + "volumetric_speed_coefficients": [ + "48.0137 -0.3915 27.3862 -32.3779 -3.9738 5.2809", + "48.0137 -0.3915 27.3862 -32.3779 -3.9738 5.2809" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S.json index a0a432569e..0cae43b7ab 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL H2S.json @@ -1,140 +1,107 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL H2S", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "5.6", - "5.6" - ], - "filament_ramming_volumetric_speed": [ - "0.7", - "0.7" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "30" - ], - "volumetric_speed_coefficients": [ - "-20.9250 -1.8134 71.7462 1.9816 0.5060 -0.1901", - "-20.9250 -1.8134 71.7462 1.9816 0.5060 -0.1901" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL H2S", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "5.6", + "5.6", + "5.6" + ], + "filament_ramming_volumetric_speed": [ + "0.7", + "0.7", + "0.7" + ], + "filament_retraction_length": [ + "1", + "1", + "1" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "30", + "30", + "30" + ], + "volumetric_speed_coefficients": [ + "-20.9250 -1.8134 71.7462 1.9816 0.5060 -0.1901", + "-20.9250 -1.8134 71.7462 1.9816 0.5060 -0.1901", + "-20.9250 -1.8134 71.7462 1.9816 0.5060 -0.1901" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P1P.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P1P.json index decf0510fc..e061018fc9 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P1P.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL P1P", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL P1P", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2.8", + "2.8" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json index ce3a3c1c9e..b294fbacc4 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.6 nozzle.json @@ -1,171 +1,86 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL P2S 0.6 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_16", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.6", - "0.6" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "0", - "0" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL P2S 0.6 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_16", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.6", + "0.6", + "0.6" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "0", + "0", + "0" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json index 7424760d4d..1c890a8ad9 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S 0.8 nozzle.json @@ -1,171 +1,54 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL P2S 0.8 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_17", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1.2", - "1.2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL P2S 0.8 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_17", + "instantiation": "true", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "1.2", + "1.2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json index ca32c1cb12..1942641481 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL P2S.json @@ -1,171 +1,71 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL P2S", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL P2S", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "1", + "1", + "1" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X1C.json index df4538dc7e..d6978f2776 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X1C.json @@ -1,130 +1,68 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL X1C", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2.8", - "2.8" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL X1C", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2.8", + "2.8" + ], + "filament_retraction_length": [ + "0.8", + "0.4" + ], + "filament_flow_ratio": [ + "1.029", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_z_hop": [ + "0.6", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json index a408dd51f2..849ff6609c 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.4 nozzle.json @@ -1,278 +1,107 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL X2D 0.4 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift", - "Auto Lift", - "Auto Lift" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8", - "2.8", - "2.8" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "225" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "225", - "225", - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "225", - "225" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL X2D 0.4 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_06", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8", + "2.8", + "2.8", + "2.8" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "225" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "225", + "225", + "225", + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json index 4596dc5cfc..675c288c03 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D 0.8 nozzle.json @@ -1,281 +1,104 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL X2D 0.8 nozzle", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.5", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8", - "2.8", - "2.8" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "225" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "225", - "225", - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "225", - "225" - ], - "slow_down_for_layer_cooling": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL X2D 0.8 nozzle", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_15", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8", + "2.8" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.5", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "225" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "nil" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "nil" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "225", + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_for_layer_cooling": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D.json b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D.json index d41e9b3574..d9af1d226f 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @BBL X2D.json @@ -1,281 +1,126 @@ { - "type": "filament", - "name": "Bambu TPU 90A @BBL X2D", - "inherits": "Bambu TPU 90A @base", - "from": "system", - "setting_id": "GFSU03_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.5", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "nil", - "1", - "nil" - ], - "filament_wipe_distance": [ - "1", - "nil", - "1", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "nil", - "Spiral Lift", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2.8", - "2.8", - "2.8", - "2.8" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "225" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "225", - "225", - "225", - "225" - ], - "nozzle_temperature_initial_layer": [ - "225", - "225", - "225", - "225" - ], - "slow_down_for_layer_cooling": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @BBL X2D", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "GFSU03_07", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8", + "2.8", + "2.8", + "2.8" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.5", + "nil", + "0.5", + "nil", + "nil", + "nil" + ], + "filament_tower_interface_print_temp": [ + "225" + ], + "filament_wipe": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_wipe_distance": [ + "1", + "nil", + "1", + "1", + "nil", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "nil", + "Spiral Lift", + "Spiral Lift", + "nil", + "Spiral Lift" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "225", + "225", + "225", + "225", + "225", + "225" + ], + "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225", + "225", + "225" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_for_layer_cooling": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 90A @base.json b/resources/profiles/BBL/filament/Bambu TPU 90A @base.json index 2f2ae95b02..583c17a63d 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 90A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 90A @base.json @@ -1,33 +1,33 @@ { - "type": "filament", - "name": "Bambu TPU 90A @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFtkLO6q", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "59.99" - ], - "filament_max_volumetric_speed": [ - "2.8" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "87.3" - ], - "nozzle_temperature": [ - "225" - ], - "nozzle_temperature_initial_layer": [ - "225" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "slow_down_layer_time": [ - "14" - ] -} + "type": "filament", + "name": "Bambu TPU 90A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFtkLO6q", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "38.99" + ], + "filament_max_volumetric_speed": [ + "2.8" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "87.3" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "slow_down_layer_time": [ + "14" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1.json index 6e003d4717..1210ba985d 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL A1", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "3.6" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL A1", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.6" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json index 3a0cce1e89..eefb04f274 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A1M.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL A1M", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "3.6" - ], - "hot_plate_temp": [ - "30" - ], - "hot_plate_temp_initial_layer": [ - "30" - ], - "textured_plate_temp": [ - "30" - ], - "textured_plate_temp_initial_layer": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL A1M", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.6" + ], + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A2L.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A2L.json index 767dc230ac..70c758c99c 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL A2L.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL A2L", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_11", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_max_volumetric_speed": [ - "3.6" - ], - "pre_start_fan_time": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL A2L", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_11", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_max_volumetric_speed": [ + "3.6" + ], + "pre_start_fan_time": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json index 252bc0a1bb..bbd0dbc809 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C 0.4 nozzle.json @@ -1,180 +1,137 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL H2C 0.4 nozzle", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6" - ], - "filament_ramming_volumetric_speed": [ - "0.9", - "0.9" - ], - "filament_ramming_volumetric_speed_nc": [ - "0.9", - "0.9" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL H2C 0.4 nozzle", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6" + ], + "filament_ramming_volumetric_speed": [ + "0.9", + "0.9", + "0.9" + ], + "filament_ramming_volumetric_speed_nc": [ + "0.9", + "0.9", + "0.9" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C.json index 5ba6a6ae92..20331454b3 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2C.json @@ -1,181 +1,138 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL H2C", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6" - ], - "filament_ramming_volumetric_speed": [ - "0.9", - "0.9" - ], - "filament_ramming_volumetric_speed_nc": [ - "0.9", - "0.9" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL H2C", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6" + ], + "filament_ramming_volumetric_speed": [ + "0.9", + "0.9", + "0.9" + ], + "filament_ramming_volumetric_speed_nc": [ + "0.9", + "0.9", + "0.9" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json index 5c2937c6fb..fa3cb556e2 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2D.json @@ -1,166 +1,283 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL H2D", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_03", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6", - "3.6" - ], - "filament_ramming_volumetric_speed": [ - "0.9", - "0.9", - "0.9" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "10" - ], - "filament_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL H2D", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_03", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6", + "3.6" + ], + "filament_ramming_volumetric_speed": [ + "0.9", + "0.9", + "0.9", + "0.9" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "2", + "2", + "2", + "2" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_bridge_speed": [ + "25", + "25", + "25", + "25" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "override_process_overhang_speed": [ + "0", + "0", + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2DP.json index a347feaa73..b2c79b2b94 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2DP.json @@ -1,166 +1,241 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL H2DP", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6", - "3.6" - ], - "filament_ramming_volumetric_speed": [ - "0.9", - "0.9", - "0.9" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "10" - ], - "filament_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL H2DP", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "10" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "0.9", + "0.9", + "0.9" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "override_process_overhang_speed": [ + "0", + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2S.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2S.json index 0e6c571c17..af483d6b70 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL H2S.json @@ -1,142 +1,99 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL H2S", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_04", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6" - ], - "filament_ramming_volumetric_speed": [ - "0.9", - "0.9" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL H2S", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_04", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6" + ], + "filament_ramming_volumetric_speed": [ + "0.9", + "0.9", + "0.9" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL P2S.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL P2S.json index f3726eaa93..240ebd5486 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL P2S.json @@ -1,173 +1,73 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL P2S", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_05", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL P2S", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_05", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json index 2d726ce148..c64d5188c5 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL X1", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "3.6", - "3.6" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL X1", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.6", + "3.6" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json index b134616a28..2cc7fbb6f3 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X1C.json @@ -1,127 +1,54 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL X1C", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "3.6", - "3.6" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL X1C", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.6", + "3.6" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json index d99f6acf2d..f17756a8b3 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D 0.4 nozzle.json @@ -1,278 +1,99 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL X2D 0.4 nozzle", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_02", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6", - "3.6", - "3.6" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL X2D 0.4 nozzle", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_02", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6", + "3.6", + "3.6", + "3.6" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D.json b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D.json index 14091161d3..4aab4ed5fe 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @BBL X2D.json @@ -1,279 +1,100 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL X2D", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.6", - "3.6", - "3.6", - "3.6" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL X2D", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_07", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.6", + "3.6", + "3.6", + "3.6", + "3.6", + "3.6" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json index 7d94b0256c..82787c65ea 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A @base.json @@ -1,27 +1,27 @@ { - "type": "filament", - "name": "Bambu TPU 95A @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFVCkX5w", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "88.7" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFVCkX5w", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1.json index 6654c53566..bf8526e1bf 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL A1", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_06", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_speed": [ - "nil" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL A1", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_06", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_speed": [ + "nil" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1M.json index 658003f5bd..a02dcb29ea 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A1M.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL A1M", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_05", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_speed": [ - "nil" - ], - "hot_plate_temp": [ - "30" - ], - "hot_plate_temp_initial_layer": [ - "30" - ], - "textured_plate_temp": [ - "30" - ], - "textured_plate_temp_initial_layer": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL A1M", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_05", + "instantiation": "true", + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_speed": [ + "nil" + ], + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json index 27926d79eb..a9f31bef41 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.6 nozzle.json @@ -1,35 +1,35 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL A2L 0.6 nozzle", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_24", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "50" - ], - "filament_retraction_length": [ - "2.5" - ], - "filament_retraction_speed": [ - "100" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_min_speed": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL A2L 0.6 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_24", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_retraction_length": [ + "2.5" + ], + "filament_retraction_speed": [ + "100" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json index e332366dad..b4eacb1a62 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L 0.8 nozzle.json @@ -1,35 +1,35 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL A2L 0.8 nozzle", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_25", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "50" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_speed": [ - "100" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_min_speed": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL A2L 0.8 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_25", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "100" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L.json index 4a0835012a..44bcddd47b 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL A2L.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL A2L", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_15", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "50" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_speed": [ - "100" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_min_speed": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL A2L", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_15", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_deretraction_speed": [ + "50" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "100" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_min_speed": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json index f451928fb0..e482736c0e 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C 0.4 nozzle.json @@ -1,183 +1,140 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL H2C 0.4 nozzle", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_13", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "3.0", - "3.0" - ], - "filament_ramming_volumetric_speed_nc": [ - "3.0", - "3.0" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2C 0.4 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_13", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_volumetric_speed": [ + "3.0", + "3.0", + "3.0" + ], + "filament_ramming_volumetric_speed_nc": [ + "3.0", + "3.0", + "3.0" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..d2368268d3 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C 0.8 nozzle.json @@ -0,0 +1,134 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2C 0.8 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_26", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "3.0", + "3.0" + ], + "filament_ramming_volumetric_speed_nc": [ + "3.0", + "3.0" + ], + "filament_retract_length_nc": [ + "10", + "10" + ], + "filament_retraction_length": [ + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "70" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C.json index 347c0fc4d7..52fdb8633b 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2C.json @@ -1,184 +1,140 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL H2C", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_14", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "3.0", - "3.0" - ], - "filament_ramming_volumetric_speed_nc": [ - "3.0", - "3.0" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2C", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_14", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "3.0", + "3.0", + "3.0" + ], + "filament_ramming_volumetric_speed_nc": [ + "3.0", + "3.0", + "3.0" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json index b061a22065..38726b7410 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D 0.4 nozzle.json @@ -1,46 +1,65 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL H2D 0.4 nozzle", - "inherits": "Bambu TPU 95A HF @BBL H2D", - "from": "system", - "setting_id": "GFSU00_20", - "instantiation": "true", - "filament_deretraction_speed": [ - "10", - "10", - "50" - ], - "filament_retraction_length": [ - "2", - "2", - "0.8" - ], - "filament_retraction_speed": [ - "10", - "10", - "50" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Slope Lift" - ], - "nozzle_temperature": [ - "230", - "230", - "240" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "240" - ], - "slow_down_min_speed": [ - "10", - "10", - "40" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2D 0.4 nozzle", + "inherits": "Bambu TPU 95A HF @BBL H2D", + "from": "system", + "setting_id": "GFSU00_20", + "instantiation": "true", + "filament_deretraction_speed": [ + "10", + "10", + "50", + "10" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10" + ], + "filament_retraction_length": [ + "2", + "2", + "0.8", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "50", + "10" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "Slope Lift", + "nil" + ], + "filament_bridge_speed": [ + "25", + "25", + "50", + "25" + ], + "nozzle_temperature": [ + "230", + "230", + "240", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "240", + "230" + ], + "slow_down_min_speed": [ + "10", + "10", + "40", + "10" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..04662c4e58 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D 0.8 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2D 0.8 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_27", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "3.0", + "3.0" + ], + "filament_retraction_length": [ + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json index 57f8ff236f..e4333a1576 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2D.json @@ -1,165 +1,281 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL H2D", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "40" - ], - "filament_flow_ratio": [ - "1", - "1", - "0.99" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "16" - ], - "filament_ramming_volumetric_speed": [ - "3.0", - "3.0", - "3.0" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "40" - ], - "filament_wipe": [ - "nil", - "nil", - "1" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230", - "235" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2D", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "25", + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "40", + "10" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "0.99", + "1" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "16", + "12" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "25", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "25", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "25", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "25", + "10" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "3.0", + "3.0", + "3.0", + "3.0" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "2", + "2", + "0.4", + "2" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "40", + "10" + ], + "filament_wipe": [ + "nil", + "nil", + "1", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "1", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "Spiral Lift", + "nil" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "230", + "230", + "235", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "235", + "230" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "30", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json index c99895e092..721fae1b45 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP 0.4 nozzle.json @@ -1,51 +1,56 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL H2DP 0.4 nozzle", - "inherits": "Bambu TPU 95A HF @BBL H2DP", - "from": "system", - "setting_id": "GFSU00_21", - "instantiation": "true", - "filament_deretraction_speed": [ - "10", - "10", - "50" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "16" - ], - "filament_retraction_length": [ - "2", - "2", - "0.8" - ], - "filament_retraction_speed": [ - "10", - "10", - "50" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Slope Lift" - ], - "nozzle_temperature": [ - "230", - "230", - "240" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "240" - ], - "slow_down_min_speed": [ - "10", - "10", - "40" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2DP 0.4 nozzle", + "inherits": "Bambu TPU 95A HF @BBL H2DP", + "from": "system", + "setting_id": "GFSU00_21", + "instantiation": "true", + "filament_bridge_speed": [ + "25", + "25", + "50" + ], + "filament_deretraction_speed": [ + "10", + "10", + "50" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "16" + ], + "filament_retraction_length": [ + "2", + "2", + "0.8" + ], + "filament_retraction_speed": [ + "10", + "10", + "50" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "Slope Lift" + ], + "nozzle_temperature": [ + "230", + "230", + "240" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "240" + ], + "slow_down_min_speed": [ + "10", + "10", + "40" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..68762079c0 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2DP 0.8 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_28", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "3.0", + "3.0" + ], + "filament_retraction_length": [ + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP.json index 181e7f9931..d0b0b6191f 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2DP.json @@ -1,165 +1,239 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL H2DP", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10", - "40" - ], - "filament_flow_ratio": [ - "1", - "1", - "0.99" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "3.0", - "3.0", - "3.0" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10", - "40" - ], - "filament_wipe": [ - "nil", - "nil", - "1" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "1" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230", - "235" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2DP", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "40" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "0.99" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "16" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "25" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "25" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "25" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "25" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "20" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "3.0", + "3.0", + "3.0" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "2", + "2", + "0.4" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "10", + "10", + "40" + ], + "filament_wipe": [ + "nil", + "nil", + "1" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "1" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "Spiral Lift" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "230", + "230", + "235" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "235" + ], + "override_process_overhang_speed": [ + "0", + "0", + "1" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "30" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..c9afffaaf8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S 0.6 nozzle.json @@ -0,0 +1,109 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2S 0.6 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..bbe70e2225 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S 0.8 nozzle.json @@ -0,0 +1,96 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2S 0.8 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_30", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "3", + "3" + ], + "filament_retraction_length": [ + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S.json index b48e66e6ae..82964bc87a 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL H2S.json @@ -1,142 +1,97 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL H2S", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "3", - "3" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "2", - "2" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "10", - "10" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL H2S", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_retraction_length": [ + "2", + "2", + "2" + ], + "filament_retraction_speed": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1P.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1P.json index 5cb160ae36..1a3cef67ba 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1P.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL P1P", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_02", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL P1P", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_02", + "instantiation": "true", + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1S.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1S.json index e13dd4b154..7710412bc5 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P1S.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL P1S", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_03", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL P1S", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_03", + "instantiation": "true", + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..949d9c0906 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S 0.6 nozzle.json @@ -0,0 +1,86 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL P2S 0.6 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_31", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..a2665f6707 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S 0.8 nozzle.json @@ -0,0 +1,77 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL P2S 0.8 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_32", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S.json index 23b20373bb..ab6761cea9 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL P2S.json @@ -1,176 +1,74 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL P2S", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL P2S", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1.json index df952405f8..41b3e48dfc 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL X1", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_01", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL X1", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_01", + "instantiation": "true", + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1C.json index 9f700cf01f..7bef00ce3f 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1C.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL X1C", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_00", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL X1C", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_00", + "instantiation": "true", + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1E.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1E.json index e5a5db367f..b855400979 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X1E.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL X1E", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_04", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @BBL X1E", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_04", + "instantiation": "true", + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json index b9ab2be6e6..f29d6d6f42 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D 0.4 nozzle.json @@ -1,278 +1,99 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL X2D 0.4 nozzle", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8", - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL X2D 0.4 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_07", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..7b2087f6a4 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D 0.8 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "name": "Bambu TPU 95A HF @BBL X2D 0.8 nozzle", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_33", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D.json index 8fd01e296c..c44f6842fc 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @BBL X2D.json @@ -1,279 +1,99 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @BBL X2D", - "inherits": "Bambu TPU 95A HF @base", - "from": "system", - "setting_id": "GFSU00_12", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8", - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_extruder_compatibility": [ - "8" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu TPU 95A HF @BBL X2D", + "inherits": "Bambu TPU 95A HF @base", + "from": "system", + "setting_id": "GFSU00_12", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "8" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json index 9f977eb5b2..d13561f288 100644 --- a/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU 95A HF @base.json @@ -1,39 +1,39 @@ { - "type": "filament", - "name": "Bambu TPU 95A HF @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFvKUnLh", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.22" - ], - "filament_deretraction_speed": [ - "10" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retraction_length": [ - "2" - ], - "filament_retraction_speed": [ - "10" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "86.3" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ] -} + "type": "filament", + "name": "Bambu TPU 95A HF @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFvKUnLh", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "38.99" + ], + "filament_density": [ + "1.22" + ], + "filament_deretraction_speed": [ + "10" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_speed": [ + "10" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "86.3" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json index 5e46c3fc96..a892637409 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1.json @@ -1,25 +1,25 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL A1", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_02", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_speed": [ - "nil" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL A1", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_02", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "nil" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json index 47baba277b..5d6371640b 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A1M.json @@ -1,25 +1,25 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL A1M", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_03", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_speed": [ - "nil" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL A1M", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_03", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "nil" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json index f4d92511dd..cbb5ed89f9 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.6 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL A2L 0.6 nozzle", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_21", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_speed": [ - "90" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "19" - ], - "slow_down_min_speed": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL A2L 0.6 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_21", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "90" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "19" + ], + "slow_down_min_speed": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json index 02a3c85695..e05f85cd65 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L 0.8 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL A2L 0.8 nozzle", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_22", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_retraction_length": [ - "0.6" - ], - "filament_retraction_speed": [ - "90" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "16" - ], - "slow_down_min_speed": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL A2L 0.8 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_22", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "0.6" + ], + "filament_retraction_speed": [ + "90" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "16" + ], + "slow_down_min_speed": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L.json index 3338821e07..f7558a1f12 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL A2L.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL A2L", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_12", - "instantiation": "true", - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_wipe": [ - "1" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "pre_start_fan_time": [ - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "35" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL A2L", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_12", + "instantiation": "true", + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_wipe": [ + "1" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift" + ], + "pre_start_fan_time": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "35" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json index 68b634336d..73f4e42208 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C 0.4 nozzle.json @@ -1,186 +1,123 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL H2C 0.4 nozzle", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "40" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "4.5", - "4.5" - ], - "filament_ramming_volumetric_speed_nc": [ - "4.5", - "4.5" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2C 0.4 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5", + "4.5" + ], + "filament_ramming_volumetric_speed_nc": [ + "4.5", + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..0e54a2e1d5 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C 0.8 nozzle.json @@ -0,0 +1,121 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2C 0.8 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_25", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5" + ], + "filament_ramming_volumetric_speed_nc": [ + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "temperature_vitrification": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C.json index 2eca7e2354..74253e1452 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2C.json @@ -1,187 +1,123 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL H2C", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "40" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "4.5", - "4.5" - ], - "filament_ramming_volumetric_speed_nc": [ - "4.5", - "4.5" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2C", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5", + "4.5" + ], + "filament_ramming_volumetric_speed_nc": [ + "4.5", + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D 0.6 nozzle.json new file mode 100644 index 0000000000..24405af162 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D 0.6 nozzle.json @@ -0,0 +1,99 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2D 0.6 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_26", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D 0.8 nozzle.json new file mode 100644 index 0000000000..cc9f65412d --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D 0.8 nozzle.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2D 0.8 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_27", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_preheat_temperature_delta": [ + "10", + "10" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json index 2762b73aed..22d29a0b08 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2D.json @@ -1,139 +1,82 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL H2D", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_04", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "4.5", - "4.5" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2D", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_04", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP 0.6 nozzle.json new file mode 100644 index 0000000000..728ec60720 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP 0.6 nozzle.json @@ -0,0 +1,84 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2DP 0.6 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_28", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP 0.8 nozzle.json new file mode 100644 index 0000000000..405b96caa6 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP 0.8 nozzle.json @@ -0,0 +1,84 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2DP 0.8 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_29", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP.json index b4ca419611..641c6bd8b2 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2DP.json @@ -1,139 +1,72 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL H2DP", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "4.5", - "4.5" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2DP", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S 0.6 nozzle.json new file mode 100644 index 0000000000..3791a37dfb --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S 0.6 nozzle.json @@ -0,0 +1,129 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2S 0.6 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_24", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5", + "4.5" + ], + "filament_ramming_volumetric_speed_nc": [ + "4.5", + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S 0.8 nozzle.json new file mode 100644 index 0000000000..785f6512f1 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S 0.8 nozzle.json @@ -0,0 +1,115 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2S 0.8 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_23", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_change_length": [ + "4" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5" + ], + "filament_ramming_volumetric_speed_nc": [ + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S.json index f497204aa0..195742bdb0 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL H2S.json @@ -1,145 +1,90 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL H2S", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "4.5", - "4.5" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] + "type": "filament", + "name": "Bambu TPU for AMS @BBL H2S", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "4.5", + "4.5", + "4.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..bf9b7554f8 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P 0.6 nozzle.json @@ -0,0 +1,61 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL P1P 0.6 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_16", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97", + "0.975" + ], + "filament_max_volumetric_speed": [ + "18", + "6" + ], + "filament_retraction_length": [ + "0.4", + "0.2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json index e62c1e698b..80d40378a7 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P1P.json @@ -1,127 +1,53 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL P1P", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_01", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL P1P", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_01", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S 0.6 nozzle.json new file mode 100644 index 0000000000..4f2c364ef4 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S 0.6 nozzle.json @@ -0,0 +1,92 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL P2S 0.6 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_30", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S 0.8 nozzle.json new file mode 100644 index 0000000000..fe6a92f21c --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S 0.8 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL P2S 0.8 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_31", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S.json index db5c9e608c..bf1249ebcb 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL P2S.json @@ -1,182 +1,80 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL P2S", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_05", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu TPU for AMS @BBL P2S", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_05", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "30" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C 0.6 nozzle.json new file mode 100644 index 0000000000..f7e164fe81 --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C 0.6 nozzle.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL X1C 0.6 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_13", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97", + "0.975" + ], + "filament_max_volumetric_speed": [ + "18", + "6" + ], + "filament_retraction_length": [ + "0.4", + "0.2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json index 6ad9b4e263..45b784e741 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X1C.json @@ -1,130 +1,55 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL X1C", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_00", - "instantiation": "true", - "fan_max_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @BBL X1C", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_00", + "instantiation": "true", + "fan_max_speed": [ + "40" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json index bb7ebd7daf..696a79e84a 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D 0.4 nozzle.json @@ -1,278 +1,102 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL X2D 0.4 nozzle", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.2", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "40" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.97", - "0.97", - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu TPU for AMS @BBL X2D 0.4 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_07", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97", + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.2", + "0.4", + "0.2", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "temperature_vitrification": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D 0.8 nozzle.json new file mode 100644 index 0000000000..116476ceeb --- /dev/null +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D 0.8 nozzle.json @@ -0,0 +1,101 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @BBL X2D 0.8 nozzle", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_32", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97", + "0.97" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D.json index e5357ea399..ee378baeff 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @BBL X2D.json @@ -1,279 +1,99 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @BBL X2D", - "inherits": "Bambu TPU for AMS @base", - "from": "system", - "setting_id": "GFSU02_08", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_max_speed": [ - "40" - ], - "filament_extruder_compatibility": [ - "16" - ], - "filament_flow_ratio": [ - "0.97", - "0.97", - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] + "type": "filament", + "name": "Bambu TPU for AMS @BBL X2D", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "GFSU02_08", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_max_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_compatibility": [ + "16" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97", + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json index 5f0b03329f..d4830a3c60 100644 --- a/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json +++ b/resources/profiles/BBL/filament/Bambu TPU for AMS @base.json @@ -1,66 +1,66 @@ { - "type": "filament", - "name": "Bambu TPU for AMS @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFIBbYO5", - "instantiation": "false", - "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "38.99" - ], - "filament_density": [ - "1.26" - ], - "filament_deretraction_speed": [ - "10" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retraction_length": [ - "2" - ], - "filament_retraction_speed": [ - "10" - ], - "filament_type": [ - "TPU-AMS" - ], - "filament_vendor": [ - "Bambu Lab" - ], - "impact_strength_z": [ - "9.6" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ] -} + "type": "filament", + "name": "Bambu TPU for AMS @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFIBbYO5", + "instantiation": "false", + "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retraction_length": [ + "2" + ], + "filament_retraction_speed": [ + "10" + ], + "filament_type": [ + "TPU-AMS" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "impact_strength_z": [ + "9.6" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @base.json b/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @base.json deleted file mode 100644 index 95a8fd47ea..0000000000 --- a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @base.json +++ /dev/null @@ -1,163 +0,0 @@ -{ - "type": "filament", - "name": "FusRock ABS-GF @base", - "inherits": "fdm_filament_common", - "from": "system", - "filament_id": "OFmn9NZL", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials（https://wiki.fusrock.com）.", - "filament_extruder_variant": [ - "Direct Drive Standard" - ], - "filament_adhesiveness_category": [ - "200" - ], - "filament_type": [ - "ABS-GF" - ], - "filament_vendor": [ - "FusRock" - ], - "filament_flow_ratio": [ - "0.92" - ], - "filament_density": [ - "1.08" - ], - "filament_cost": [ - "13" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "cool_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "supertack_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "105" - ], - "eng_plate_temp": [ - "105" - ], - "hot_plate_temp_initial_layer": [ - "105" - ], - "hot_plate_temp": [ - "105" - ], - "textured_plate_temp_initial_layer": [ - "105" - ], - "textured_plate_temp": [ - "105" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature": [ - "270" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "fan_min_speed": [ - "10" - ], - "fan_cooling_layer_time": [ - "12" - ], - "fan_max_speed": [ - "30" - ], - "slow_down_layer_time": [ - "4" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_min_speed": [ - "20" - ], - "enable_overhang_bridge_fan": [ - "1" - ], - "overhang_fan_threshold": [ - "10%" - ], - "overhang_threshold_participating_cooling": [ - "100%" - ], - "overhang_fan_speed": [ - "30" - ], - "pre_start_fan_time": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "activate_air_filtration": [ - "1" - ], - "during_print_exhaust_fan_speed": [ - "30" - ], - "complete_print_exhaust_fan_speed": [ - "10" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_z_hop": [ - "0.4" - ], - "filament_z_hop_types": [ - "Spiral Lift" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retract_when_changing_layer": [ - "0" - ], - "filament_wipe": [ - "0" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ], - "filament_notes": "//EN\n1.Be sure to read it carefully before using (https://wiki.fusrock.com).\n2.When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials（https://wiki.fusrock.com）.\\n3.Thank you for choosing us FusRock.\n*This setting may not be able to adapt to all models. In some cases, you need to modify and adjust the parameters by yourself to improve the printing effect.\n*FusRock 3D printing filaments are intended for general-purpose printing and have been tested under standard conditions. However, the performance and safety of printed objects are affected by multiple factors, including printing parameters, model design, usage environment, and the specific application.\n*By using FusRock materials, the user acknowledges and agrees to independently evaluate whether the printed parts are suitable for their intended use, and assumes all associated risks.\n*FusRock shall not be held liable for any damage, injury, or loss that may result from the use of printed products made with our materials, including but not limited to structural failure, functional defects, or safety hazards under actual usage conditions.Before applying printed parts in any critical, functional, or commercial context, thorough testing must be conducted. Except for the certifications explicitly stated for specific FusRock materials, our products are not certified for medical, aerospace, or life-support applications.\n//CN\n1.使用前请务必仔细阅读（https://wiki.fusrock.com）。\n2.打印该耗材时，可能会出现喷嘴堵塞、拉丝、翘边以及层间附着力不足等问题。为了获得更好的打印效果，请参考此维基页面：高温 / 工程材料打印技巧（https://wiki.fusrock.com）。\n3.感谢您选择FusRock。\n*此设置不一定能够适配所有模型，存在部分情况下需要您自行修改调整参数来提升打印效果。\n*FusRock 3D打印耗材适用于通用打印用途，已在标准条件下进行测试。然而，打印成品的性能与安全性受多种因素影响，包括打印参数、模型设计、使用环境及实际用途。\n*使用FusRock材料即表示用户已知悉并同意，自行评估打印件是否适用于其具体应用，并承担由此产生的全部风险。\n*FusRock对使用本公司耗材打印的产品在实际应用中可能导致的任何损害、伤害或损失不承担任何责任，包括但不限于结构失效、功能异常或使用环境中的安全隐患。在将打印件应用于关键、功能性或商业性场景前，请务必进行充分测试。除FusRock已标明材料所获得的各项认证资质外，FusRock产品未取得医疗、航天或生命支持系统认证资质。", - "impact_strength_z": [ - "5.3" - ] -} diff --git a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json index b37a33a8fe..ea692b1849 100644 --- a/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @0.2 nozzle.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic ABS @0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS @0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL A1 0.2 nozzle.json index 094d26bee1..a094891d38 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL A1 0.2 nozzle.json @@ -1,32 +1,32 @@ { - "type": "filament", - "name": "Generic ABS @BBL A1 0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_06", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS @BBL A1 0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_06", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL A1.json b/resources/profiles/BBL/filament/Generic ABS @BBL A1.json index b2a4909f9c..4c9b38b183 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL A1.json @@ -1,34 +1,37 @@ { - "type": "filament", - "name": "Generic ABS @BBL A1", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_05", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS @BBL A1", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_05", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_retraction_length": [ + "0.4" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.2 nozzle.json index 921bd56b9f..a95f8b7000 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.2 nozzle.json @@ -1,180 +1,83 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2C 0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_18", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "40" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2C 0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_18", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.4 nozzle.json index 1fd81f53d5..1262f2e87b 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2C 0.4 nozzle.json @@ -1,171 +1,108 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2C 0.4 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_16", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2C 0.4 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_16", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2C.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2C.json index e14004572f..4b2f542fdf 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2C.json @@ -1,172 +1,109 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2C", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_17", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "230", - "230" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2C", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_17", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "230", + "230", + "230" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json index 567b30c430..9495615771 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2D 0.2 nozzle.json @@ -1,128 +1,47 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2D 0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2D 0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json index 242cd40643..9a813fd06d 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2D.json @@ -1,130 +1,55 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2D", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2D", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2DP 0.2 nozzle.json index 0f3b6c1505..034c767566 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2DP 0.2 nozzle.json @@ -1,128 +1,47 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2DP 0.2 nozzle", - "inherits": "Generic ABS @0.2 nozzle", - "from": "system", - "setting_id": "GFSB99_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2DP 0.2 nozzle", + "inherits": "Generic ABS @0.2 nozzle", + "from": "system", + "setting_id": "GFSB99_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2DP.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2DP.json index ba21cde063..808befc013 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2DP.json @@ -1,130 +1,49 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2DP", - "inherits": "Generic ABS", - "from": "system", - "setting_id": "GFSB99_11", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2DP", + "inherits": "Generic ABS", + "from": "system", + "setting_id": "GFSB99_11", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.2 nozzle.json index bc238da9d2..e412d22e80 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.2 nozzle.json @@ -1,131 +1,62 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2S 0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_22", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "40" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2S 0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_22", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "40" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.4 nozzle.json index 1bffdc2ba7..4e19da6ed8 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL H2S 0.4 nozzle.json @@ -1,127 +1,82 @@ { - "type": "filament", - "name": "Generic ABS @BBL H2S 0.4 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_21", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL H2S 0.4 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_21", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL P2S 0.2 nozzle.json index a94d0c097a..04624095b8 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL P2S 0.2 nozzle.json @@ -1,165 +1,56 @@ { - "type": "filament", - "name": "Generic ABS @BBL P2S 0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL P2S 0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL P2S.json b/resources/profiles/BBL/filament/Generic ABS @BBL P2S.json index 73300b11d2..b03f98831f 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL P2S.json @@ -1,167 +1,62 @@ { - "type": "filament", - "name": "Generic ABS @BBL P2S", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL P2S", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json index 3117363a52..946ef8f492 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X1E 0.2 nozzle.json @@ -1,119 +1,42 @@ { - "type": "filament", - "name": "Generic ABS @BBL X1E 0.2 nozzle", - "inherits": "Generic ABS @0.2 nozzle", - "from": "system", - "setting_id": "GFSB99_04", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS @BBL X1E 0.2 nozzle", + "inherits": "Generic ABS @0.2 nozzle", + "from": "system", + "setting_id": "GFSB99_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json b/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json index f57c4510a2..5043419305 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X1E.json @@ -1,121 +1,44 @@ { - "type": "filament", - "name": "Generic ABS @BBL X1E", - "inherits": "Generic ABS", - "from": "system", - "setting_id": "GFSB99_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS @BBL X1E", + "inherits": "Generic ABS", + "from": "system", + "setting_id": "GFSB99_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.2 nozzle.json index 4854d1c98b..7ef8a9eea3 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.2 nozzle.json @@ -1,266 +1,77 @@ { - "type": "filament", - "name": "Generic ABS @BBL X2D 0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "2", - "2" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL X2D 0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_15", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.4 nozzle.json index 7840aa4d8a..c4f4f032bd 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic ABS @BBL X2D 0.4 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "15", - "15", - "15", - "15" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL X2D 0.4 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_13", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15", + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @BBL X2D.json b/resources/profiles/BBL/filament/Generic ABS @BBL X2D.json index 354570652b..296f60a32c 100644 --- a/resources/profiles/BBL/filament/Generic ABS @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic ABS @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic ABS @BBL X2D", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "15", - "15", - "15", - "15" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "270" - ], - "nozzle_temperature": [ - "270", - "270", - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ABS @BBL X2D", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_14", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15", + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "270" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS @base.json b/resources/profiles/BBL/filament/Generic ABS @base.json index d15a7cdfea..c38d4f371a 100644 --- a/resources/profiles/BBL/filament/Generic ABS @base.json +++ b/resources/profiles/BBL/filament/Generic ABS @base.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Generic ABS @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFY9muEs", - "instantiation": "false", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ] -} + "type": "filament", + "name": "Generic ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFY9muEs", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ABS.json b/resources/profiles/BBL/filament/Generic ABS.json index 40cfb23b7a..b740793514 100644 --- a/resources/profiles/BBL/filament/Generic ABS.json +++ b/resources/profiles/BBL/filament/Generic ABS.json @@ -1,22 +1,25 @@ { - "type": "filament", - "name": "Generic ABS", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "15" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "15" + ], + "filament_retraction_length": [ + "0.4" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json index 535f48bf18..7e26d7bb66 100644 --- a/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @0.2 nozzle.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic ASA @0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA @0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL A1 0.2 nozzle.json index d0d0a96895..9830140547 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL A1 0.2 nozzle.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic ASA @BBL A1 0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA @BBL A1 0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL A1.json b/resources/profiles/BBL/filament/Generic ASA @BBL A1.json index 1ec63fb6f8..282fab2763 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Generic ASA @BBL A1", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_04", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA @BBL A1", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_04", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.2 nozzle.json index 777de9e63b..54194fbb21 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.2 nozzle.json @@ -1,177 +1,80 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2C 0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_16", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "220", - "220" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2C 0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_16", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "220", + "220" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.4 nozzle.json index 0fbf7075a8..4fdada67bf 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2C 0.4 nozzle.json @@ -1,174 +1,111 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2C 0.4 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_17", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "220", - "220" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2C 0.4 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_17", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "220", + "220", + "220" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2C.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2C.json index c454519dcb..090c4aff5f 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2C.json @@ -1,175 +1,112 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2C", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_18", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "220", - "220" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2C", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_18", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "220", + "220", + "220" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json index 910c35b01d..5b34e05140 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2D 0.2 nozzle.json @@ -1,128 +1,47 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2D 0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_05", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2D 0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json index bab8005821..0ff6405d9d 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2D.json @@ -1,130 +1,55 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2D", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_06", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2D", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2DP 0.2 nozzle.json index b5a978207b..d18f10b86c 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2DP 0.2 nozzle.json @@ -1,128 +1,47 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2DP 0.2 nozzle", - "inherits": "Generic ASA @0.2 nozzle", - "from": "system", - "setting_id": "GFSB98_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2DP 0.2 nozzle", + "inherits": "Generic ASA @0.2 nozzle", + "from": "system", + "setting_id": "GFSB98_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2DP.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2DP.json index f7b48b9538..cf40a83df7 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2DP.json @@ -1,130 +1,49 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2DP", - "inherits": "Generic ASA", - "from": "system", - "setting_id": "GFSB98_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2DP", + "inherits": "Generic ASA", + "from": "system", + "setting_id": "GFSB98_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.2 nozzle.json index a7ae370b40..600499309e 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.2 nozzle.json @@ -1,146 +1,77 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2S 0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_22", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2S 0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_22", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.4 nozzle.json index 78479bbcf6..76f6c346c0 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL H2S 0.4 nozzle.json @@ -1,148 +1,103 @@ { - "type": "filament", - "name": "Generic ASA @BBL H2S 0.4 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_21", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL H2S 0.4 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_21", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL P2S 0.2 nozzle.json index 2a070f1652..5541d06861 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL P2S 0.2 nozzle.json @@ -1,183 +1,74 @@ { - "type": "filament", - "name": "Generic ASA @BBL P2S 0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL P2S 0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL P2S.json b/resources/profiles/BBL/filament/Generic ASA @BBL P2S.json index 9bf5026339..91646bd08f 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL P2S.json @@ -1,185 +1,80 @@ { - "type": "filament", - "name": "Generic ASA @BBL P2S", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL P2S", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json index 750118d31d..348c3e8e9e 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X1E 0.2 nozzle.json @@ -1,119 +1,42 @@ { - "type": "filament", - "name": "Generic ASA @BBL X1E 0.2 nozzle", - "inherits": "Generic ASA @0.2 nozzle", - "from": "system", - "setting_id": "GFSB98_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA @BBL X1E 0.2 nozzle", + "inherits": "Generic ASA @0.2 nozzle", + "from": "system", + "setting_id": "GFSB98_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json b/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json index 1225e33b6a..0e0d8a0997 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X1E.json @@ -1,121 +1,44 @@ { - "type": "filament", - "name": "Generic ASA @BBL X1E", - "inherits": "Generic ASA", - "from": "system", - "setting_id": "GFSB98_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA @BBL X1E", + "inherits": "Generic ASA", + "from": "system", + "setting_id": "GFSB98_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.2 nozzle.json index 84de220839..e53dae7455 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.2 nozzle.json @@ -1,266 +1,77 @@ { - "type": "filament", - "name": "Generic ASA @BBL X2D 0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "2", - "2", - "2", - "2" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL X2D 0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_13", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2", + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.4 nozzle.json index 4c17d0b666..ee7d814947 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic ASA @BBL X2D 0.4 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL X2D 0.4 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_14", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @BBL X2D.json b/resources/profiles/BBL/filament/Generic ASA @BBL X2D.json index 40c72ceee4..f2613130f1 100644 --- a/resources/profiles/BBL/filament/Generic ASA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic ASA @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic ASA @BBL X2D", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic ASA @BBL X2D", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_15", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA @base.json b/resources/profiles/BBL/filament/Generic ASA @base.json index 699fc64f7c..d860a37821 100644 --- a/resources/profiles/BBL/filament/Generic ASA @base.json +++ b/resources/profiles/BBL/filament/Generic ASA @base.json @@ -1,33 +1,33 @@ { - "type": "filament", - "name": "Generic ASA @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OFLPAxz3", - "instantiation": "false", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ] -} + "type": "filament", + "name": "Generic ASA @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OFLPAxz3", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic ASA.json b/resources/profiles/BBL/filament/Generic ASA.json index d5b6456db8..7e56eb37af 100644 --- a/resources/profiles/BBL/filament/Generic ASA.json +++ b/resources/profiles/BBL/filament/Generic ASA.json @@ -1,19 +1,19 @@ { - "type": "filament", - "name": "Generic ASA", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL A1.json b/resources/profiles/BBL/filament/Generic BVOH @BBL A1.json index 065a899291..c719bc4f8d 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Generic BVOH @BBL A1", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_02", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL A1", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL A1M.json b/resources/profiles/BBL/filament/Generic BVOH @BBL A1M.json index c3e7ea8742..c7c2bb1fbc 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL A1M.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Generic BVOH @BBL A1M", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_01", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL A1M", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL A2L.json b/resources/profiles/BBL/filament/Generic BVOH @BBL A2L.json index 2e2d66ea50..f90124864b 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL A2L.json @@ -1,19 +1,19 @@ { - "type": "filament", - "name": "Generic BVOH @BBL A2L", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_10", - "instantiation": "true", - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL A2L", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_10", + "instantiation": "true", + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic BVOH @BBL H2C 0.4 nozzle.json index bb5ed16dbe..2238cbdae1 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL H2C 0.4 nozzle.json @@ -1,177 +1,94 @@ { - "type": "filament", - "name": "Generic BVOH @BBL H2C 0.4 nozzle", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL H2C 0.4 nozzle", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL H2C.json b/resources/profiles/BBL/filament/Generic BVOH @BBL H2C.json index 6bdf0d5c99..6ad4f65689 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL H2C.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic BVOH @BBL H2C", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL H2C", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json b/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json index 359f483a81..b6a467b3a0 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL H2D.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Generic BVOH @BBL H2D", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_03", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL H2D", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_03", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL H2DP.json b/resources/profiles/BBL/filament/Generic BVOH @BBL H2DP.json index 2133d66a0d..0e0c3a994b 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Generic BVOH @BBL H2DP", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL H2DP", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic BVOH @BBL H2S 0.4 nozzle.json index 8f9c236520..f6e2599e15 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL H2S 0.4 nozzle.json @@ -1,136 +1,76 @@ { - "type": "filament", - "name": "Generic BVOH @BBL H2S 0.4 nozzle", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_11", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL H2S 0.4 nozzle", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_11", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL P2S.json b/resources/profiles/BBL/filament/Generic BVOH @BBL P2S.json index b924559101..51e7f4f88f 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL P2S.json @@ -1,173 +1,73 @@ { - "type": "filament", - "name": "Generic BVOH @BBL P2S", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL P2S", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL X1C.json b/resources/profiles/BBL/filament/Generic BVOH @BBL X1C.json index 122196177a..278d9943ca 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL X1C.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Generic BVOH @BBL X1C", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL X1C", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_00", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic BVOH @BBL X2D 0.4 nozzle.json index a76d2f3bc8..b9321b9892 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL X2D 0.4 nozzle.json @@ -1,272 +1,93 @@ { - "type": "filament", - "name": "Generic BVOH @BBL X2D 0.4 nozzle", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL X2D 0.4 nozzle", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @BBL X2D.json b/resources/profiles/BBL/filament/Generic BVOH @BBL X2D.json index feeb341891..b36508c030 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic BVOH @BBL X2D.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic BVOH @BBL X2D", - "inherits": "Generic BVOH @base", - "from": "system", - "setting_id": "GFSS97_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic BVOH @BBL X2D", + "inherits": "Generic BVOH @base", + "from": "system", + "setting_id": "GFSS97_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic BVOH @base.json b/resources/profiles/BBL/filament/Generic BVOH @base.json index 4a0fdf358e..da0a8da1bb 100644 --- a/resources/profiles/BBL/filament/Generic BVOH @base.json +++ b/resources/profiles/BBL/filament/Generic BVOH @base.json @@ -1,11 +1,11 @@ { - "type": "filament", - "name": "Generic BVOH @base", - "inherits": "fdm_filament_bvoh", - "from": "system", - "filament_id": "OFo2UF2C", - "instantiation": "false", - "filament_adhesiveness_category": [ - "797" - ] -} + "type": "filament", + "name": "Generic BVOH @base", + "inherits": "fdm_filament_bvoh", + "from": "system", + "filament_id": "OFo2UF2C", + "instantiation": "false", + "filament_adhesiveness_category": [ + "797" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL A1.json b/resources/profiles/BBL/filament/Generic EVA @BBL A1.json index a6d8267096..1090e57594 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL A1.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic EVA @BBL A1", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_01", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic EVA @BBL A1", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_01", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL A1M.json b/resources/profiles/BBL/filament/Generic EVA @BBL A1M.json index c0cae7fd4a..9d903da18d 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL A1M.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic EVA @BBL A1M", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_02", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 mini 0.6 nozzle" - ] -} + "type": "filament", + "name": "Generic EVA @BBL A1M", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_02", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL A2L.json b/resources/profiles/BBL/filament/Generic EVA @BBL A2L.json index 7f8afc4732..39d644ab35 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL A2L.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Generic EVA @BBL A2L", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_11", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic EVA @BBL A2L", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_11", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic EVA @BBL H2C 0.4 nozzle.json index d20e6c6608..614d08e93f 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL H2C 0.4 nozzle.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic EVA @BBL H2C 0.4 nozzle", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_08", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL H2C 0.4 nozzle", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_08", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL H2C.json b/resources/profiles/BBL/filament/Generic EVA @BBL H2C.json index 5c32ec697a..91349159f1 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL H2C.json @@ -1,179 +1,96 @@ { - "type": "filament", - "name": "Generic EVA @BBL H2C", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_09", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL H2C", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_09", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json b/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json index 7c3a40e926..f71bc5f2d2 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL H2D.json @@ -1,134 +1,64 @@ { - "type": "filament", - "name": "Generic EVA @BBL H2D", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_03", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL H2D", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_03", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL H2DP.json b/resources/profiles/BBL/filament/Generic EVA @BBL H2DP.json index 0bcb1c622d..1a845320ad 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL H2DP.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Generic EVA @BBL H2DP", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_05", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL H2DP", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_05", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic EVA @BBL H2S 0.4 nozzle.json index ded79988ba..1effe071b2 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL H2S 0.4 nozzle.json @@ -1,137 +1,77 @@ { - "type": "filament", - "name": "Generic EVA @BBL H2S 0.4 nozzle", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_12", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "40" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL H2S 0.4 nozzle", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_12", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL P2S.json b/resources/profiles/BBL/filament/Generic EVA @BBL P2S.json index 352bef9f8d..d59dd359af 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL P2S.json @@ -1,174 +1,74 @@ { - "type": "filament", - "name": "Generic EVA @BBL P2S", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_04", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL P2S", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_04", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL X1C.json b/resources/profiles/BBL/filament/Generic EVA @BBL X1C.json index 4de66e4b21..3e54162ac4 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL X1C.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "Generic EVA @BBL X1C", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_00", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic EVA @BBL X1C", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic EVA @BBL X2D 0.4 nozzle.json index 02e31aa051..3f3277cb67 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL X2D 0.4 nozzle.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic EVA @BBL X2D 0.4 nozzle", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL X2D 0.4 nozzle", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_06", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @BBL X2D.json b/resources/profiles/BBL/filament/Generic EVA @BBL X2D.json index 9730666950..3e447fb433 100644 --- a/resources/profiles/BBL/filament/Generic EVA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic EVA @BBL X2D.json @@ -1,274 +1,95 @@ { - "type": "filament", - "name": "Generic EVA @BBL X2D", - "inherits": "Generic EVA @base", - "from": "system", - "setting_id": "GFSR99_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic EVA @BBL X2D", + "inherits": "Generic EVA @base", + "from": "system", + "setting_id": "GFSR99_07", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic EVA @base.json b/resources/profiles/BBL/filament/Generic EVA @base.json index 79308d5d37..987b77013d 100644 --- a/resources/profiles/BBL/filament/Generic EVA @base.json +++ b/resources/profiles/BBL/filament/Generic EVA @base.json @@ -1,83 +1,86 @@ { - "type": "filament", - "name": "Generic EVA @base", - "inherits": "fdm_filament_eva", - "from": "system", - "filament_id": "OFCD8qiU", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "21.99" - ], - "filament_density": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_low": [ - "175" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic EVA @base", + "inherits": "fdm_filament_eva", + "from": "system", + "filament_id": "OFCD8qiU", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_low": [ + "175" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1 0.2 nozzle.json index fc12cd457b..9a75038819 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1 0.2 nozzle.json @@ -1,32 +1,32 @@ { - "type": "filament", - "name": "Generic HIPS @BBL A1 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_05", - "instantiation": "true", - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL A1 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_05", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1.json index b5c3f5a664..7ca8bbc16a 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1.json @@ -1,31 +1,31 @@ { - "type": "filament", - "name": "Generic HIPS @BBL A1", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_04", - "instantiation": "true", - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL A1", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_04", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json index 07ca51b896..a2200be03c 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M 0.2 nozzle.json @@ -1,32 +1,32 @@ { - "type": "filament", - "name": "Generic HIPS @BBL A1M 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_03", - "instantiation": "true", - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL A1M 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_03", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json index 78e10ef103..11c1000c23 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A1M.json @@ -1,31 +1,31 @@ { - "type": "filament", - "name": "Generic HIPS @BBL A1M", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_02", - "instantiation": "true", - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL A1M", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_02", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A2L 0.2 nozzle.json index 88c952b8d6..bbb755bf1e 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A2L 0.2 nozzle.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Generic HIPS @BBL A2L 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_18", - "instantiation": "true", - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "40" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL A2L 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_18", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "40" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL A2L.json b/resources/profiles/BBL/filament/Generic HIPS @BBL A2L.json index 9af02ee93a..7d51372d31 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL A2L.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic HIPS @BBL A2L", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_19", - "instantiation": "true", - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL A2L", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_19", + "instantiation": "true", + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.2 nozzle.json index 06ce0cbc13..bf887ab1a9 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.2 nozzle.json @@ -1,171 +1,78 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2C 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_17", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2C 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_17", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.4 nozzle.json index da9c295fc8..f55bddf14f 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2C 0.4 nozzle.json @@ -1,171 +1,88 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2C 0.4 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_15", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2C 0.4 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_15", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200", + "200" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2C.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2C.json index 71ab193857..c4699ac65a 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2C.json @@ -1,172 +1,89 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2C", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_16", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "75" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2C", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_16", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "200", + "200", + "200" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "75" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json index 719d29fdfa..2cf9a6067f 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D 0.2 nozzle.json @@ -1,125 +1,48 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2D 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_07", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2D 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_07", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json index ff10ca843d..c198e26682 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2D.json @@ -1,127 +1,57 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2D", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_06", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2D", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_06", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP 0.2 nozzle.json index f37ed54947..c27f7b5a17 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP 0.2 nozzle.json @@ -1,125 +1,48 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2DP 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_11", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2DP 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_11", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP.json index 00f330d6ab..a534eca8c3 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2DP.json @@ -1,127 +1,50 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2DP", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_10", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2DP", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_10", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.2 nozzle.json index 75df44fcfe..4f7a78c954 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.2 nozzle.json @@ -1,119 +1,54 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2S 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_21", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2S 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_21", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.4 nozzle.json index 0701193a90..c290b8755f 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL H2S 0.4 nozzle.json @@ -1,121 +1,61 @@ { - "type": "filament", - "name": "Generic HIPS @BBL H2S 0.4 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_20", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL H2S 0.4 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_20", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL P2S 0.2 nozzle.json index 2dc6447076..7ce3c7c1cc 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL P2S 0.2 nozzle.json @@ -1,165 +1,60 @@ { - "type": "filament", - "name": "Generic HIPS @BBL P2S 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_09", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL P2S 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_09", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL P2S.json b/resources/profiles/BBL/filament/Generic HIPS @BBL P2S.json index d1e020aa46..86e6d953b3 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL P2S.json @@ -1,167 +1,67 @@ { - "type": "filament", - "name": "Generic HIPS @BBL P2S", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_08", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL P2S", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_08", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json index 7810d59b2e..47de7f95d7 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C 0.2 nozzle.json @@ -1,123 +1,50 @@ { - "type": "filament", - "name": "Generic HIPS @BBL X1C 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL X1C 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_01", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json index 842f64c74e..d69f4ca1e2 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X1C.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Generic HIPS @BBL X1C", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL X1C", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_00", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.2 nozzle.json index 16d3e96621..4c8a2cb705 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.2 nozzle.json @@ -1,266 +1,77 @@ { - "type": "filament", - "name": "Generic HIPS @BBL X2D 0.2 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL X2D 0.2 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_14", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.4 nozzle.json index bd1986896c..2b340b6ac0 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic HIPS @BBL X2D 0.4 nozzle", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_12", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL X2D 0.4 nozzle", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_12", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @BBL X2D.json b/resources/profiles/BBL/filament/Generic HIPS @BBL X2D.json index 940072f4a5..8bea0ce705 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic HIPS @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic HIPS @BBL X2D", - "inherits": "Generic HIPS @base", - "from": "system", - "setting_id": "GFSS98_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic HIPS @BBL X2D", + "inherits": "Generic HIPS @base", + "from": "system", + "setting_id": "GFSS98_13", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic HIPS @base.json b/resources/profiles/BBL/filament/Generic HIPS @base.json index a0df005ecc..5ec83e7881 100644 --- a/resources/profiles/BBL/filament/Generic HIPS @base.json +++ b/resources/profiles/BBL/filament/Generic HIPS @base.json @@ -1,11 +1,11 @@ { - "type": "filament", - "name": "Generic HIPS @base", - "inherits": "fdm_filament_hips", - "from": "system", - "filament_id": "OFsFon5l", - "instantiation": "false", - "filament_is_support": [ - "1" - ] -} + "type": "filament", + "name": "Generic HIPS @base", + "inherits": "fdm_filament_hips", + "from": "system", + "filament_id": "OFsFon5l", + "instantiation": "false", + "filament_is_support": [ + "1" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL A1.json b/resources/profiles/BBL/filament/Generic PA @BBL A1.json index 93a713df83..a995a42b31 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL A1.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic PA @BBL A1", - "inherits": "Generic PA", - "from": "system", - "setting_id": "GFSN99_00", - "instantiation": "true", - "chamber_temperatures": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PA @BBL A1", + "inherits": "Generic PA", + "from": "system", + "setting_id": "GFSN99_00", + "instantiation": "true", + "chamber_temperatures": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PA @BBL H2C 0.4 nozzle.json index eeb46a95ff..267b5c24bf 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL H2C 0.4 nozzle.json @@ -1,171 +1,88 @@ { - "type": "filament", - "name": "Generic PA @BBL H2C 0.4 nozzle", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_06", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "220", - "220" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "temperature_vitrification": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA @BBL H2C 0.4 nozzle", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_06", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "220", + "220", + "220" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "temperature_vitrification": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL H2C.json b/resources/profiles/BBL/filament/Generic PA @BBL H2C.json index 65615430e6..211a60ca2c 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL H2C.json @@ -1,172 +1,89 @@ { - "type": "filament", - "name": "Generic PA @BBL H2C", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_07", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "220", - "220" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "temperature_vitrification": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA @BBL H2C", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_07", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "220", + "220", + "220" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "temperature_vitrification": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PA @BBL H2D.json index 9e594ddb90..5d2382b5e1 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL H2D.json @@ -1,127 +1,57 @@ { - "type": "filament", - "name": "Generic PA @BBL H2D", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_01", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA @BBL H2D", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_01", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PA @BBL H2DP.json index 62287a716e..dbaee5f823 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL H2DP.json @@ -1,127 +1,50 @@ { - "type": "filament", - "name": "Generic PA @BBL H2DP", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_03", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "4", - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA @BBL H2DP", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_03", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PA @BBL H2S 0.4 nozzle.json index 7fee81fd11..17d650e3d9 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL H2S 0.4 nozzle.json @@ -1,130 +1,65 @@ { - "type": "filament", - "name": "Generic PA @BBL H2S 0.4 nozzle", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_12", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA @BBL H2S 0.4 nozzle", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_12", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "temperature_vitrification": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL P2S.json b/resources/profiles/BBL/filament/Generic PA @BBL P2S.json index fea73f2950..46e2fe4c59 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL P2S.json @@ -1,164 +1,59 @@ { - "type": "filament", - "name": "Generic PA @BBL P2S", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_02", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA @BBL P2S", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_02", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PA @BBL X2D 0.4 nozzle.json index f8703664fe..06005616ac 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL X2D 0.4 nozzle.json @@ -1,263 +1,76 @@ { - "type": "filament", - "name": "Generic PA @BBL X2D 0.4 nozzle", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_04", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA @BBL X2D 0.4 nozzle", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_04", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @BBL X2D.json b/resources/profiles/BBL/filament/Generic PA @BBL X2D.json index 081a982513..fb5410d411 100644 --- a/resources/profiles/BBL/filament/Generic PA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PA @BBL X2D.json @@ -1,264 +1,77 @@ { - "type": "filament", - "name": "Generic PA @BBL X2D", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN99_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "260" - ], - "nozzle_temperature": [ - "260", - "260", - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260", - "260", - "260" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA @BBL X2D", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN99_05", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "260" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260", + "260", + "260", + "260" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA @base.json b/resources/profiles/BBL/filament/Generic PA @base.json index e6dad20449..bba2bff54b 100644 --- a/resources/profiles/BBL/filament/Generic PA @base.json +++ b/resources/profiles/BBL/filament/Generic PA @base.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Generic PA @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFg8ndtj", - "instantiation": "false", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "chamber_temperatures": [ - "60" - ], - "fan_cooling_layer_time": [ - "65" - ], - "fan_max_speed": [ - "85" - ], - "fan_min_speed": [ - "40" - ], - "filament_max_volumetric_speed": [ - "12" - ], + "type": "filament", + "name": "Generic PA @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFg8ndtj", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "chamber_temperatures": [ + "60" + ], + "fan_cooling_layer_time": [ + "65" + ], + "fan_max_speed": [ + "85" + ], + "fan_min_speed": [ + "40" + ], + "filament_max_volumetric_speed": [ + "12" + ], "filament_dev_ams_drying_temperature": [ "65", "80", @@ -36,31 +36,31 @@ "filament_dev_drying_softening_temperature": [ "85" ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "95" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "3" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ] -} + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL A1.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL A1.json index 1950571c28..d35160d2be 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL A1.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL A1", - "inherits": "Generic PA-CF", - "from": "system", - "setting_id": "GFSN98_01", - "instantiation": "true", - "temperature_vitrification": [ - "108" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL A1", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_01", + "instantiation": "true", + "temperature_vitrification": [ + "108" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C 0.4 nozzle.json index 830430cea4..05d7a22c85 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C 0.4 nozzle.json @@ -1,174 +1,91 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL H2C 0.4 nozzle", - "inherits": "Generic PA-CF", - "from": "system", - "setting_id": "GFSN98_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "130" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL H2C 0.4 nozzle", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "130" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C.json index aa932ea447..c33ae0a90c 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2C.json @@ -1,175 +1,92 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL H2C", - "inherits": "Generic PA-CF", - "from": "system", - "setting_id": "GFSN98_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "130" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL H2C", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "130" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json index 9c295df735..47b846b4a8 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2D.json @@ -1,130 +1,60 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL H2D", - "inherits": "Generic PA-CF", - "from": "system", - "setting_id": "GFSN98_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL H2D", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2DP.json index 125b577d1a..c4a8fbb2c8 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2DP.json @@ -1,130 +1,53 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL H2DP", - "inherits": "Generic PA-CF", - "from": "system", - "setting_id": "GFSN98_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL H2DP", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2S 0.4 nozzle.json index 7af66ea34f..a6797dac4b 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL H2S 0.4 nozzle.json @@ -1,133 +1,73 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL H2S 0.4 nozzle", - "inherits": "Generic PA-CF @base", - "from": "system", - "setting_id": "GFSN98_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "130" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL H2S 0.4 nozzle", + "inherits": "Generic PA-CF @base", + "from": "system", + "setting_id": "GFSN98_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "130" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL P2S.json index f675bb6803..e6a74c5ef4 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL P2S.json @@ -1,167 +1,67 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL P2S", - "inherits": "Generic PA-CF @base", - "from": "system", - "setting_id": "GFSN98_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL P2S", + "inherits": "Generic PA-CF @base", + "from": "system", + "setting_id": "GFSN98_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json index fbac5ee6d3..4f8e4e863b 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL X1E.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL X1E", - "inherits": "Generic PA-CF", - "from": "system", - "setting_id": "GFSN98_00", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL X1E", + "inherits": "Generic PA-CF", + "from": "system", + "setting_id": "GFSN98_00", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D 0.4 nozzle.json index e799f4bee8..8b70453f51 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL X2D 0.4 nozzle", - "inherits": "Generic PA-CF @base", - "from": "system", - "setting_id": "GFSN98_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL X2D 0.4 nozzle", + "inherits": "Generic PA-CF @base", + "from": "system", + "setting_id": "GFSN98_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D.json index 55a9e5601f..67f2112489 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL X2D", - "inherits": "Generic PA-CF @base", - "from": "system", - "setting_id": "GFSN98_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL X2D", + "inherits": "Generic PA-CF @base", + "from": "system", + "setting_id": "GFSN98_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF @base.json b/resources/profiles/BBL/filament/Generic PA-CF @base.json index 7c77ffe482..756d98b928 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PA-CF @base.json @@ -1,33 +1,36 @@ { - "type": "filament", - "name": "Generic PA-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFQLcbps", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_type": [ - "PA-CF" - ], - "full_fan_speed_layer": [ - "2" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "temperature_vitrification": [ - "170" - ] -} + "type": "filament", + "name": "Generic PA-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFQLcbps", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_type": [ + "PA-CF" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "170" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA-CF.json b/resources/profiles/BBL/filament/Generic PA-CF.json index eaef22a467..d316826ea5 100644 --- a/resources/profiles/BBL/filament/Generic PA-CF.json +++ b/resources/profiles/BBL/filament/Generic PA-CF.json @@ -1,19 +1,19 @@ { - "type": "filament", - "name": "Generic PA-CF", - "inherits": "Generic PA-CF @base", - "from": "system", - "setting_id": "GFSN99", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PA-CF", + "inherits": "Generic PA-CF @base", + "from": "system", + "setting_id": "GFSN99", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PA.json b/resources/profiles/BBL/filament/Generic PA.json index c543dfb5d2..ef3aa6526b 100644 --- a/resources/profiles/BBL/filament/Generic PA.json +++ b/resources/profiles/BBL/filament/Generic PA.json @@ -1,22 +1,22 @@ { - "type": "filament", - "name": "Generic PA", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN98", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PA", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN98", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json index 1f91e7819b..2aaddc1d97 100644 --- a/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @0.2 nozzle.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Generic PC @0.2 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @0.2 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL A1 0.2 nozzle.json index 9c086ee516..12484bcf7f 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PC @BBL A1 0.2 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_08", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL A1 0.2 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_08", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL A1.json b/resources/profiles/BBL/filament/Generic PC @BBL A1.json index d27d005aa7..8da1f25885 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic PC @BBL A1", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_07", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL A1", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_07", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.2 nozzle.json index a3aad0310b..a8ed1fae09 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.2 nozzle.json @@ -1,174 +1,81 @@ { - "type": "filament", - "name": "Generic PC @BBL H2C 0.2 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_20", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2C 0.2 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_20", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.4 nozzle.json index 96341294ac..3cbc4d7d04 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2C 0.4 nozzle.json @@ -1,174 +1,111 @@ { - "type": "filament", - "name": "Generic PC @BBL H2C 0.4 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_21", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2C 0.4 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_21", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2C.json b/resources/profiles/BBL/filament/Generic PC @BBL H2C.json index df406fff54..3f41a55f11 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2C.json @@ -1,175 +1,112 @@ { - "type": "filament", - "name": "Generic PC @BBL H2C", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_22", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "240", - "240" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2C", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_22", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "240", + "240", + "240" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json index f8364ea552..c999776cf7 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2D 0.2 nozzle.json @@ -1,128 +1,51 @@ { - "type": "filament", - "name": "Generic PC @BBL H2D 0.2 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2D 0.2 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2D.json b/resources/profiles/BBL/filament/Generic PC @BBL H2D.json index b896cb1d8e..47fb014f54 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2D.json @@ -1,130 +1,60 @@ { - "type": "filament", - "name": "Generic PC @BBL H2D", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_10", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2D", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_10", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2DP 0.2 nozzle.json index 30fefeea16..68becb1906 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2DP 0.2 nozzle.json @@ -1,128 +1,51 @@ { - "type": "filament", - "name": "Generic PC @BBL H2DP 0.2 nozzle", - "inherits": "Generic PC @0.2 nozzle", - "from": "system", - "setting_id": "GFSC99_15", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2DP 0.2 nozzle", + "inherits": "Generic PC @0.2 nozzle", + "from": "system", + "setting_id": "GFSC99_15", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PC @BBL H2DP.json index 3909e3f0af..8b75dc13d4 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2DP.json @@ -1,130 +1,53 @@ { - "type": "filament", - "name": "Generic PC @BBL H2DP", - "inherits": "Generic PC", - "from": "system", - "setting_id": "GFSC99_16", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2DP", + "inherits": "Generic PC", + "from": "system", + "setting_id": "GFSC99_16", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL H2S 0.2 nozzle.json index 68bce60e54..c50fc3489b 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2S 0.2 nozzle.json @@ -1,131 +1,66 @@ { - "type": "filament", - "name": "Generic PC @BBL H2S 0.2 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2S 0.2 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL H2S.json b/resources/profiles/BBL/filament/Generic PC @BBL H2S.json index 86d8644b6e..b425c60f05 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL H2S.json @@ -1,133 +1,93 @@ { - "type": "filament", - "name": "Generic PC @BBL H2S", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_11", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PC @BBL H2S", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_11", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json index 1cb8865544..1a384446d0 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL P1S 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Generic PC @BBL P1S 0.2 nozzle", - "inherits": "Generic PC @0.2 nozzle", - "from": "system", - "setting_id": "GFSC99_03", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL P1S 0.2 nozzle", + "inherits": "Generic PC @0.2 nozzle", + "from": "system", + "setting_id": "GFSC99_03", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P1S.json b/resources/profiles/BBL/filament/Generic PC @BBL P1S.json index eddd0f3b07..19b146fcb8 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL P1S.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL P1S.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Generic PC @BBL P1S", - "inherits": "Generic PC", - "from": "system", - "setting_id": "GFSC99_04", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL P1S", + "inherits": "Generic PC", + "from": "system", + "setting_id": "GFSC99_04", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL P2S 0.2 nozzle.json index 9462fe110a..7a9760120a 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL P2S 0.2 nozzle.json @@ -1,183 +1,78 @@ { - "type": "filament", - "name": "Generic PC @BBL P2S 0.2 nozzle", - "inherits": "Generic PC @0.2 nozzle", - "from": "system", - "setting_id": "GFSC99_13", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PC @BBL P2S 0.2 nozzle", + "inherits": "Generic PC @0.2 nozzle", + "from": "system", + "setting_id": "GFSC99_13", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL P2S.json b/resources/profiles/BBL/filament/Generic PC @BBL P2S.json index 2ebfebc7d8..54960ffdb6 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL P2S.json @@ -1,185 +1,85 @@ { - "type": "filament", - "name": "Generic PC @BBL P2S", - "inherits": "Generic PC", - "from": "system", - "setting_id": "GFSC99_14", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PC @BBL P2S", + "inherits": "Generic PC", + "from": "system", + "setting_id": "GFSC99_14", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json index ab5cb290e1..931d3b1495 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL X1E 0.2 nozzle.json @@ -1,122 +1,49 @@ { - "type": "filament", - "name": "Generic PC @BBL X1E 0.2 nozzle", - "inherits": "Generic PC @0.2 nozzle", - "from": "system", - "setting_id": "GFSC99_05", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL X1E 0.2 nozzle", + "inherits": "Generic PC @0.2 nozzle", + "from": "system", + "setting_id": "GFSC99_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X1E.json b/resources/profiles/BBL/filament/Generic PC @BBL X1E.json index 98787f054e..80e9a6c901 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL X1E.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Generic PC @BBL X1E", - "inherits": "Generic PC", - "from": "system", - "setting_id": "GFSC99_06", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL X1E", + "inherits": "Generic PC", + "from": "system", + "setting_id": "GFSC99_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.2 nozzle.json index a78168d21c..758091daa3 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.2 nozzle.json @@ -1,266 +1,77 @@ { - "type": "filament", - "name": "Generic PC @BBL X2D 0.2 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PC @BBL X2D 0.2 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_17", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.4 nozzle.json index f0af348f0e..2b9331cbe1 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic PC @BBL X2D 0.4 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_18", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PC @BBL X2D 0.4 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_18", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @BBL X2D.json b/resources/profiles/BBL/filament/Generic PC @BBL X2D.json index dcc901e61d..934e618447 100644 --- a/resources/profiles/BBL/filament/Generic PC @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PC @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic PC @BBL X2D", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_19", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.94", - "0.94", - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "280" - ], - "nozzle_temperature": [ - "280", - "280", - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270", - "270", - "270" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PC @BBL X2D", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_19", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "280" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", + "270" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC @base.json b/resources/profiles/BBL/filament/Generic PC @base.json index b61c2296b5..4226a49f5d 100644 --- a/resources/profiles/BBL/filament/Generic PC @base.json +++ b/resources/profiles/BBL/filament/Generic PC @base.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Generic PC @base", - "inherits": "fdm_filament_pc", - "from": "system", - "filament_id": "OFLakOUI", - "instantiation": "false", - "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "filament_flow_ratio": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "16" - ] -} + "type": "filament", + "name": "Generic PC @base", + "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "OFLakOUI", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "16" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PC.json b/resources/profiles/BBL/filament/Generic PC.json index 5c31679456..6e8cbc2c6e 100644 --- a/resources/profiles/BBL/filament/Generic PC.json +++ b/resources/profiles/BBL/filament/Generic PC.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic PC", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PC", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL A1.json b/resources/profiles/BBL/filament/Generic PCTG @BBL A1.json index 0d50315158..0d7ddda1cb 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL A1.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Generic PCTG @BBL A1", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_01", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL A1", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_01", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL A1M.json b/resources/profiles/BBL/filament/Generic PCTG @BBL A1M.json index 1009d7e522..3f02a3a3e8 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL A1M.json @@ -1,13 +1,13 @@ { - "type": "filament", - "name": "Generic PCTG @BBL A1M", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_02", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL A1M", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_02", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL A2L.json b/resources/profiles/BBL/filament/Generic PCTG @BBL A2L.json index 4908632fd1..0188b6396f 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL A2L.json @@ -1,19 +1,19 @@ { - "type": "filament", - "name": "Generic PCTG @BBL A2L", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_10", - "instantiation": "true", - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL A2L", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_10", + "instantiation": "true", + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PCTG @BBL H2C 0.4 nozzle.json index 8c4b384ba1..cc4ccc4df7 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL H2C 0.4 nozzle.json @@ -1,171 +1,78 @@ { - "type": "filament", - "name": "Generic PCTG @BBL H2C 0.4 nozzle", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_08", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL H2C 0.4 nozzle", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_08", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL H2C.json b/resources/profiles/BBL/filament/Generic PCTG @BBL H2C.json index 1111bf79dd..a6d2f7b961 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL H2C.json @@ -1,172 +1,79 @@ { - "type": "filament", - "name": "Generic PCTG @BBL H2C", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_09", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL H2C", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_09", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json b/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json index 6b12183d0d..6c4652cdd7 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL H2D.json @@ -1,127 +1,47 @@ { - "type": "filament", - "name": "Generic PCTG @BBL H2D", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_03", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL H2D", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_03", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PCTG @BBL H2DP.json index 76b8c3a828..2fba98ad14 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL H2DP.json @@ -1,127 +1,42 @@ { - "type": "filament", - "name": "Generic PCTG @BBL H2DP", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_05", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL H2DP", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_05", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PCTG @BBL H2S 0.4 nozzle.json index 4d93a98047..7ba47da8ea 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL H2S 0.4 nozzle.json @@ -1,130 +1,60 @@ { - "type": "filament", - "name": "Generic PCTG @BBL H2S 0.4 nozzle", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_11", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "60" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL H2S 0.4 nozzle", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_11", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL P2S.json b/resources/profiles/BBL/filament/Generic PCTG @BBL P2S.json index 0931564b87..dc6f419172 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL P2S.json @@ -1,167 +1,57 @@ { - "type": "filament", - "name": "Generic PCTG @BBL P2S", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_04", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL P2S", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_04", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL X1C.json b/resources/profiles/BBL/filament/Generic PCTG @BBL X1C.json index 1380331a77..38af07cac9 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL X1C.json @@ -1,133 +1,52 @@ { - "type": "filament", - "name": "Generic PCTG @BBL X1C", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL X1C", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PCTG @BBL X2D 0.4 nozzle.json index df0ea56d94..9468465fc3 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL X2D 0.4 nozzle.json @@ -1,266 +1,79 @@ { - "type": "filament", - "name": "Generic PCTG @BBL X2D 0.4 nozzle", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL X2D 0.4 nozzle", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_06", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @BBL X2D.json b/resources/profiles/BBL/filament/Generic PCTG @BBL X2D.json index df1601a0d1..f27677f209 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PCTG @BBL X2D.json @@ -1,267 +1,80 @@ { - "type": "filament", - "name": "Generic PCTG @BBL X2D", - "inherits": "Generic PCTG @base", - "from": "system", - "setting_id": "GFSG97_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PCTG @BBL X2D", + "inherits": "Generic PCTG @base", + "from": "system", + "setting_id": "GFSG97_07", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PCTG @base.json b/resources/profiles/BBL/filament/Generic PCTG @base.json index 2eea3496a3..f4b8444275 100644 --- a/resources/profiles/BBL/filament/Generic PCTG @base.json +++ b/resources/profiles/BBL/filament/Generic PCTG @base.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Generic PCTG @base", - "inherits": "fdm_filament_pctg", - "from": "system", - "filament_id": "OFu1evlr", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "28.99" - ], - "filament_density": [ - "1.29" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "6" - ], + "type": "filament", + "name": "Generic PCTG @base", + "inherits": "fdm_filament_pctg", + "from": "system", + "filament_id": "OFu1evlr", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "28.99" + ], + "filament_density": [ + "1.29" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "6" + ], "filament_dev_chamber_drying_bed_temperature": [ "80" ], @@ -66,37 +66,37 @@ "filament_dev_drying_softening_temperature": [ "60" ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "12" - ], - "temperature_vitrification": [ - "90" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "temperature_vitrification": [ + "90" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL A1.json b/resources/profiles/BBL/filament/Generic PE @BBL A1.json index 570275aa34..39e2445109 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL A1.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PE @BBL A1", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_01", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PE @BBL A1", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_01", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL A1M.json b/resources/profiles/BBL/filament/Generic PE @BBL A1M.json index a8ce6f5860..c1127d4123 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL A1M.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PE @BBL A1M", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_02", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PE @BBL A1M", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_02", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL A2L.json b/resources/profiles/BBL/filament/Generic PE @BBL A2L.json index 010887c67a..831832b034 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL A2L.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Generic PE @BBL A2L", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_10", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PE @BBL A2L", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_10", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PE @BBL H2C 0.4 nozzle.json index 2fdd6dfb3b..0620cbf5c5 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL H2C 0.4 nozzle.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic PE @BBL H2C 0.4 nozzle", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_08", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE @BBL H2C 0.4 nozzle", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_08", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL H2C.json b/resources/profiles/BBL/filament/Generic PE @BBL H2C.json index 84601671d0..9f8d92f68d 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL H2C.json @@ -1,179 +1,96 @@ { - "type": "filament", - "name": "Generic PE @BBL H2C", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_09", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE @BBL H2C", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_09", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL H2D.json b/resources/profiles/BBL/filament/Generic PE @BBL H2D.json index d3ab2a6d47..4488fc82b9 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL H2D.json @@ -1,134 +1,64 @@ { - "type": "filament", - "name": "Generic PE @BBL H2D", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_03", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE @BBL H2D", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_03", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PE @BBL H2DP.json index 204e484f6c..0764a31a50 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL H2DP.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Generic PE @BBL H2DP", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_05", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE @BBL H2DP", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_05", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PE @BBL H2S 0.4 nozzle.json index 5abcc9fb83..63fa707cc9 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL H2S 0.4 nozzle.json @@ -1,137 +1,77 @@ { - "type": "filament", - "name": "Generic PE @BBL H2S 0.4 nozzle", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_11", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE @BBL H2S 0.4 nozzle", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_11", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL P2S.json b/resources/profiles/BBL/filament/Generic PE @BBL P2S.json index 8527b90373..beda73d06f 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL P2S.json @@ -1,174 +1,74 @@ { - "type": "filament", - "name": "Generic PE @BBL P2S", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_04", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE @BBL P2S", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_04", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL X1C.json b/resources/profiles/BBL/filament/Generic PE @BBL X1C.json index 4875f9950a..b6c33141eb 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL X1C.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "Generic PE @BBL X1C", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_00", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PE @BBL X1C", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PE @BBL X2D 0.4 nozzle.json index 5db7dad391..639d0db200 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL X2D 0.4 nozzle.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PE @BBL X2D 0.4 nozzle", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE @BBL X2D 0.4 nozzle", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_06", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @BBL X2D.json b/resources/profiles/BBL/filament/Generic PE @BBL X2D.json index 1d33204d49..57d7b3f760 100644 --- a/resources/profiles/BBL/filament/Generic PE @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PE @BBL X2D.json @@ -1,274 +1,95 @@ { - "type": "filament", - "name": "Generic PE @BBL X2D", - "inherits": "Generic PE @base", - "from": "system", - "setting_id": "GFSP99_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8", - "8", - "8" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE @BBL X2D", + "inherits": "Generic PE @base", + "from": "system", + "setting_id": "GFSP99_07", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE @base.json b/resources/profiles/BBL/filament/Generic PE @base.json index d9bdfc84a5..f286dabbd4 100644 --- a/resources/profiles/BBL/filament/Generic PE @base.json +++ b/resources/profiles/BBL/filament/Generic PE @base.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PE @base", - "inherits": "fdm_filament_pe", - "from": "system", - "filament_id": "OFPklMI1", - "instantiation": "false", - "filament_cost": [ - "40.99" - ], - "filament_density": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_adhesiveness_category": [ - "901" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "175" - ], - "temperature_vitrification": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PE @base", + "inherits": "fdm_filament_pe", + "from": "system", + "filament_id": "OFPklMI1", + "instantiation": "false", + "filament_cost": [ + "40.99" + ], + "filament_density": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_adhesiveness_category": [ + "901" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "175" + ], + "temperature_vitrification": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL A1.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1.json index 8fb197041f..50584fff90 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL A1", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_01", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL A1", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_01", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1M.json index f01619fe37..2e3b4b4bf4 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL A1M.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL A1M", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_02", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL A1M", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_02", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL A2L.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL A2L.json index 49e57d939f..163a86dbc6 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL A2L.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL A2L", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_10", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL A2L", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_10", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C 0.4 nozzle.json index 5e444e7926..76b9551c6d 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C 0.4 nozzle.json @@ -1,177 +1,94 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL H2C 0.4 nozzle", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL H2C 0.4 nozzle", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C.json index 47ec6b69cf..4d48c0d584 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2C.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL H2C", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "170", - "170" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL H2C", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "170", + "170", + "170" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json index e9e7db6446..3af5c5c3d2 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2D.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL H2D", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_03", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL H2D", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_03", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2DP.json index e545f0fac7..455af49506 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL H2DP", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL H2DP", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2S 0.4 nozzle.json index 01f3d21dc3..2e65986a1f 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL H2S 0.4 nozzle.json @@ -1,136 +1,76 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL H2S 0.4 nozzle", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_11", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL H2S 0.4 nozzle", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_11", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL P2S.json index b713f1a3ec..9b7a6166db 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL P2S.json @@ -1,173 +1,73 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL P2S", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL P2S", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL X1C.json index 6413db2fdb..a8ba7158f4 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL X1C.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL X1C", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL X1C", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_00", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D 0.4 nozzle.json index a4d7d0aa2a..92a476c117 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D 0.4 nozzle.json @@ -1,272 +1,93 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL X2D 0.4 nozzle", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL X2D 0.4 nozzle", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D.json index 630ad14c1e..01a9694628 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @BBL X2D.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PE-CF @BBL X2D", - "inherits": "Generic PE-CF @base", - "from": "system", - "setting_id": "GFSP98_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "210" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "210", - "210", - "210", - "210" - ], - "nozzle_temperature_initial_layer": [ - "210", - "210", - "210", - "210" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PE-CF @BBL X2D", + "inherits": "Generic PE-CF @base", + "from": "system", + "setting_id": "GFSP98_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "210" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", + "210" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PE-CF @base.json b/resources/profiles/BBL/filament/Generic PE-CF @base.json index 655a30e41e..d638297441 100644 --- a/resources/profiles/BBL/filament/Generic PE-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PE-CF @base.json @@ -1,41 +1,41 @@ { - "type": "filament", - "name": "Generic PE-CF @base", - "inherits": "fdm_filament_pe", - "from": "system", - "filament_id": "OFd0Fv0k", - "instantiation": "false", - "filament_cost": [ - "65.99" - ], - "filament_density": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_type": [ - "PE-CF" - ], - "filament_adhesiveness_category": [ - "901" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "175" - ], - "temperature_vitrification": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PE-CF @base", + "inherits": "fdm_filament_pe", + "from": "system", + "filament_id": "OFd0Fv0k", + "instantiation": "false", + "filament_cost": [ + "65.99" + ], + "filament_density": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PE-CF" + ], + "filament_adhesiveness_category": [ + "901" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "nozzle_temperature_range_low": [ + "175" + ], + "temperature_vitrification": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json index d308ac9d7e..0c415d9844 100644 --- a/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @0.2 nozzle.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "Generic PETG @0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG @0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1 0.2 nozzle.json index 2e371d99f9..8be927cabe 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1 0.2 nozzle.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Generic PETG @BBL A1 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_04", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG @BBL A1 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1.json index 00a50550fe..ef9cc612fb 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic PETG @BBL A1", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG @BBL A1", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json index 462dfb4049..7abc1a0652 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1M 0.2 nozzle.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PETG @BBL A1M 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG @BBL A1M 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json b/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json index 5c31f2eacb..83ce33ee7b 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A1M.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic PETG @BBL A1M", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG @BBL A1M", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL A2L 0.2 nozzle.json index bfce104d88..84808dd0d7 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A2L 0.2 nozzle.json @@ -1,26 +1,26 @@ { - "type": "filament", - "name": "Generic PETG @BBL A2L 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_21", - "instantiation": "true", - "filament_flush_temp_fast": [ - "255" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PETG @BBL A2L 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_21", + "instantiation": "true", + "filament_flush_temp_fast": [ + "255" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL A2L.json b/resources/profiles/BBL/filament/Generic PETG @BBL A2L.json index 62f2c876b5..64d95945d1 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL A2L.json @@ -1,25 +1,25 @@ { - "type": "filament", - "name": "Generic PETG @BBL A2L", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_22", - "instantiation": "true", - "filament_flush_temp_fast": [ - "255" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PETG @BBL A2L", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_22", + "instantiation": "true", + "filament_flush_temp_fast": [ + "255" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.2 nozzle.json index e252904409..fb92858690 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.2 nozzle.json @@ -1,174 +1,81 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2C 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_20", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2C 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_20", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.4 nozzle.json index 2d726beb14..45204a656a 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2C 0.4 nozzle.json @@ -1,174 +1,116 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2C 0.4 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_18", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2C 0.4 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_18", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2C.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2C.json index e853d20f76..e73b442d97 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2C.json @@ -1,175 +1,117 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2C", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_19", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2C", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_19", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json index f52322b556..f15490d650 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2D 0.2 nozzle.json @@ -1,125 +1,44 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2D 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_06", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2D 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_06", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json index f71227f3f4..f69e5c6ad3 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2D.json @@ -1,127 +1,52 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2D", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_05", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2D", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_05", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2DP 0.2 nozzle.json index 3b4d4fda65..9b3db34823 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2DP 0.2 nozzle.json @@ -1,125 +1,44 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2DP 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_14", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2DP 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_14", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2DP.json index e4b22419c3..6cbef8f4ce 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2DP.json @@ -1,127 +1,46 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2DP", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_13", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2DP", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_13", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2S 0.2 nozzle.json index 79ef05bdd0..94c8446116 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2S 0.2 nozzle.json @@ -1,125 +1,56 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2S 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_08", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2S 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_08", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL H2S.json b/resources/profiles/BBL/filament/Generic PETG @BBL H2S.json index a761a4afb3..154c1094d8 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL H2S.json @@ -1,127 +1,82 @@ { - "type": "filament", - "name": "Generic PETG @BBL H2S", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_07", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL H2S", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_07", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL P2S 0.2 nozzle.json index 033a2aaf0d..ca225ca3ac 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL P2S 0.2 nozzle.json @@ -1,165 +1,56 @@ { - "type": "filament", - "name": "Generic PETG @BBL P2S 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_12", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL P2S 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_12", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL P2S.json b/resources/profiles/BBL/filament/Generic PETG @BBL P2S.json index d676dda67a..f3138a608d 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL P2S.json @@ -1,167 +1,62 @@ { - "type": "filament", - "name": "Generic PETG @BBL P2S", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_09", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL P2S", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_09", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.2 nozzle.json index 952532b483..82240ccef4 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.2 nozzle.json @@ -1,266 +1,77 @@ { - "type": "filament", - "name": "Generic PETG @BBL X2D 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL X2D 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_17", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.4 nozzle.json index 44ea0d462b..82f9a99de7 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic PETG @BBL X2D 0.4 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL X2D 0.4 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_15", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @BBL X2D.json b/resources/profiles/BBL/filament/Generic PETG @BBL X2D.json index 0ffb3c2ec0..a304ef6972 100644 --- a/resources/profiles/BBL/filament/Generic PETG @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PETG @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic PETG @BBL X2D", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG @BBL X2D", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_16", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG @base.json b/resources/profiles/BBL/filament/Generic PETG @base.json index 9fce0893ce..8d7b2da4fa 100644 --- a/resources/profiles/BBL/filament/Generic PETG @base.json +++ b/resources/profiles/BBL/filament/Generic PETG @base.json @@ -1,65 +1,65 @@ { - "type": "filament", - "name": "Generic PETG @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFYPdQJh", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFYPdQJh", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json index 3dcc9b8fb4..099dfcc30a 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1 0.2 nozzle.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL A1 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_05", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL A1 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json index 14bfa688a6..5f7c2112c0 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL A1", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_04", - "instantiation": "true", - "filament_retraction_length": [ - "0.4" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL A1", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_04", + "instantiation": "true", + "filament_retraction_length": [ + "0.4" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json index 84972c2cd7..0b499781ae 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M 0.2 nozzle.json @@ -1,11 +1,11 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL A1M 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_07", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL A1M 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_07", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json index 26a86d9d36..233d6f0d96 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A1M.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL A1M", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_06", - "instantiation": "true", - "filament_retraction_length": [ - "0.4" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL A1M", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_06", + "instantiation": "true", + "filament_retraction_length": [ + "0.4" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L 0.2 nozzle.json index 2599094d1e..10770bd12e 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L 0.2 nozzle.json @@ -1,23 +1,23 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL A2L 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_20", - "instantiation": "true", - "filament_flush_temp_fast": [ - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL A2L 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_20", + "instantiation": "true", + "filament_flush_temp_fast": [ + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L.json index 6c1582d465..dcaedaf69c 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL A2L.json @@ -1,25 +1,25 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL A2L", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_21", - "instantiation": "true", - "filament_flush_temp_fast": [ - "220" - ], - "filament_retraction_length": [ - "0.4" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL A2L", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_21", + "instantiation": "true", + "filament_flush_temp_fast": [ + "220" + ], + "filament_retraction_length": [ + "0.4" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.2 nozzle.json index d4b72d6747..bd018277f2 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.2 nozzle.json @@ -1,174 +1,77 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2C 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_19", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "205", - "205" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "pre_start_fan_time": [ - "2" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2C 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_19", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "205", + "205" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "pre_start_fan_time": [ + "2" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.4 nozzle.json index 450f208606..62636d5e82 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C 0.4 nozzle.json @@ -1,174 +1,111 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2C 0.4 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_17", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2C 0.4 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_17", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C.json index e603865aff..da1017048e 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2C.json @@ -1,175 +1,112 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2C", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_18", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.97", - "0.97" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2C", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_18", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json index 1cea9673b0..600d96f045 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D 0.2 nozzle.json @@ -1,125 +1,40 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2D 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_09", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2D 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_09", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json index be2f636abe..2818415ba3 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2D.json @@ -1,127 +1,52 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2D", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_08", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2D", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_08", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP 0.2 nozzle.json index 24db4dfdcb..fd48dad992 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP 0.2 nozzle.json @@ -1,125 +1,40 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2DP 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_13", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2DP 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_13", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP.json index 60f9c5b472..00943fdd36 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2DP.json @@ -1,127 +1,46 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2DP", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_12", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2DP", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_12", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.2 nozzle.json index e3da519133..30bf4eb540 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.2 nozzle.json @@ -1,119 +1,46 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2S 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_23", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2S 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_23", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.4 nozzle.json index ef0e4c2484..510a7cf7f0 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL H2S 0.4 nozzle.json @@ -1,121 +1,71 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL H2S 0.4 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_22", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL H2S 0.4 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_22", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json index 4c4f4a6473..f1c4f5ed06 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P 0.2 nozzle.json @@ -1,119 +1,38 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL P1P 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL P1P 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json index 8c6ad70b29..77b10307b9 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1P.json @@ -1,121 +1,44 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL P1P", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_02", - "instantiation": "true", - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL P1P", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_02", + "instantiation": "true", + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1S 0.4 nozzle.json new file mode 100644 index 0000000000..1b95667681 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1S 0.4 nozzle.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL P1S 0.4 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_26", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P1S 0.6 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1S 0.6 nozzle.json new file mode 100644 index 0000000000..e001db1b67 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P1S 0.6 nozzle.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL P1S 0.6 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_25", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.2 nozzle.json index 7b4ee0feb9..e2bc00bfb5 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.2 nozzle.json @@ -1,165 +1,52 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL P2S 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_11", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL P2S 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_11", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.4 nozzle.json index ae267ccb31..8dcec1db76 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S 0.4 nozzle.json @@ -1,165 +1,66 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL P2S 0.4 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_24", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "240", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL P2S 0.4 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_24", + "instantiation": "true", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flush_temp": [ + "240", + "0", + "240" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S.json index 7e2184289b..cbe50861cd 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL P2S.json @@ -1,166 +1,61 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL P2S", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_10", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL P2S", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_10", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1 0.6 nozzle.json new file mode 100644 index 0000000000..b91dcf6873 --- /dev/null +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1 0.6 nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "Generic PETG HF @BBL X1 0.6 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_27", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json index d15b26a5ec..afb1f036d1 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C 0.2 nozzle.json @@ -1,122 +1,41 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL X1C 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL X1C 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json index 1232d758ef..c667488f82 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X1C.json @@ -1,130 +1,48 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL X1C", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_00", - "instantiation": "true", - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL X1C", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_00", + "instantiation": "true", + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.2 nozzle.json index fab213e03d..0131943783 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.2 nozzle.json @@ -1,266 +1,71 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL X2D 0.2 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL X2D 0.2 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_16", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.4 nozzle.json index 0aa0826fcd..d4cfdc9fc9 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL X2D 0.4 nozzle", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL X2D 0.4 nozzle", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_14", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D.json index 0e9381abae..3ff655ec13 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic PETG HF @BBL X2D", - "inherits": "Generic PETG HF @base", - "from": "system", - "setting_id": "GFSG96_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG HF @BBL X2D", + "inherits": "Generic PETG HF @base", + "from": "system", + "setting_id": "GFSG96_15", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG HF @base.json b/resources/profiles/BBL/filament/Generic PETG HF @base.json index c756285013..1212ab9f41 100644 --- a/resources/profiles/BBL/filament/Generic PETG HF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG HF @base.json @@ -1,71 +1,71 @@ { - "type": "filament", - "name": "Generic PETG HF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OF7lOgYF", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.28" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "25" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PETG HF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OF7lOgYF", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "filament_cost": [ + "24.99" + ], + "filament_density": [ + "1.28" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "25" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL A1.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL A1.json index d15b2594ca..ce31f210d3 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL A1.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL A1", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL A1", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL A2L.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL A2L.json index 3936c4b090..3ea13e1da8 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL A2L.json @@ -1,25 +1,25 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL A2L", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_11", - "instantiation": "true", - "filament_flush_temp_fast": [ - "255" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL A2L", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_11", + "instantiation": "true", + "filament_flush_temp_fast": [ + "255" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json index 50e41672f4..e2dc6c43da 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C 0.4 nozzle.json @@ -1,183 +1,90 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL H2C 0.4 nozzle", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL H2C 0.4 nozzle", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C.json index 26119cd309..fffb6a6e49 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2C.json @@ -1,184 +1,91 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL H2C", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_09", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "215", - "215" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "temperature_vitrification": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL H2C", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_09", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "215", + "215", + "215" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "temperature_vitrification": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json index 293180b9cd..063d30a279 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2D.json @@ -1,139 +1,59 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL H2D", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL H2D", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2DP.json index 2d551d5f46..d0e4ff8752 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2DP.json @@ -1,139 +1,54 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL H2DP", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL H2DP", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2S.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2S.json index f5c0d4fdff..585f656ab1 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL H2S.json @@ -1,139 +1,74 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL H2S", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "0" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL H2S", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "nil", + "0", + "nil" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL P2S.json index 077f1e0c8c..e1944cca5d 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL P2S.json @@ -1,179 +1,69 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL P2S", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL P2S", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json index 3fca9e53f9..46dda5c26d 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X1C.json @@ -1,142 +1,61 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL X1C", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG50", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL X1C", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG50", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json index 8d09db5733..73db99b2ce 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json @@ -1,278 +1,91 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL X2D 0.4 nozzle", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5", - "11.5", - "11.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL X2D 0.4 nozzle", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5", + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D.json index 63ecfe6fa5..2309a91389 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @BBL X2D.json @@ -1,279 +1,92 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL X2D", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5", - "11.5", - "11.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "255" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "255", - "255", - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255", - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL X2D", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5", + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "255" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255", + "255", + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG-CF @base.json b/resources/profiles/BBL/filament/Generic PETG-CF @base.json index 4f2f6ed3f9..0cf0faa3c9 100644 --- a/resources/profiles/BBL/filament/Generic PETG-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PETG-CF @base.json @@ -1,74 +1,74 @@ { - "type": "filament", - "name": "Generic PETG-CF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFoYSJKi", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG-CF" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "required_nozzle_HRC": [ - "40" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PETG-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFoYSJKi", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PETG.json b/resources/profiles/BBL/filament/Generic PETG.json index 3f04b02a3f..4052484a56 100644 --- a/resources/profiles/BBL/filament/Generic PETG.json +++ b/resources/profiles/BBL/filament/Generic PETG.json @@ -1,22 +1,22 @@ { - "type": "filament", - "name": "Generic PETG", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL A1.json b/resources/profiles/BBL/filament/Generic PHA @BBL A1.json index 41cd622c87..32f3fd84a9 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL A1.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PHA @BBL A1", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_02", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PHA @BBL A1", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_02", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PHA @BBL A1M.json index 881d4cd47b..a3c6158000 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL A1M.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PHA @BBL A1M", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_01", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PHA @BBL A1M", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_01", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL A2L.json b/resources/profiles/BBL/filament/Generic PHA @BBL A2L.json index 6fa1b48bde..55c1640f2a 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL A2L.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Generic PHA @BBL A2L", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_10", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle", - "Bambu Lab A2L 0.4 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PHA @BBL A2L", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_10", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PHA @BBL H2C 0.4 nozzle.json index f2217f38f2..df3bf156db 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL H2C 0.4 nozzle.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic PHA @BBL H2C 0.4 nozzle", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_08", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "45" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL H2C 0.4 nozzle", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_08", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL H2C.json b/resources/profiles/BBL/filament/Generic PHA @BBL H2C.json index ba9d4b46ce..1bcacd3c03 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL H2C.json @@ -1,179 +1,96 @@ { - "type": "filament", - "name": "Generic PHA @BBL H2C", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_09", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "45" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL H2C", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_09", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json index af8836c575..43fd6c61be 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL H2D.json @@ -1,134 +1,64 @@ { - "type": "filament", - "name": "Generic PHA @BBL H2D", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_03", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL H2D", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_03", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PHA @BBL H2DP.json index 21574e4ee1..373ff783a0 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL H2DP.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Generic PHA @BBL H2DP", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_05", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL H2DP", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_05", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PHA @BBL H2S 0.4 nozzle.json index b9ab3740c2..3e46256165 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL H2S 0.4 nozzle.json @@ -1,137 +1,77 @@ { - "type": "filament", - "name": "Generic PHA @BBL H2S 0.4 nozzle", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_11", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "45" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL H2S 0.4 nozzle", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_11", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL P2S.json b/resources/profiles/BBL/filament/Generic PHA @BBL P2S.json index 9b156885d0..8d85a309e6 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL P2S.json @@ -1,174 +1,74 @@ { - "type": "filament", - "name": "Generic PHA @BBL P2S", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_04", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL P2S", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_04", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL X1C.json b/resources/profiles/BBL/filament/Generic PHA @BBL X1C.json index e5cb995ec6..2a7fd6891d 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL X1C.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "Generic PHA @BBL X1C", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_00", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PHA @BBL X1C", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PHA @BBL X2D 0.4 nozzle.json index d385da7295..aee19ed325 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL X2D 0.4 nozzle.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PHA @BBL X2D 0.4 nozzle", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL X2D 0.4 nozzle", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_06", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @BBL X2D.json b/resources/profiles/BBL/filament/Generic PHA @BBL X2D.json index e46a4dde77..a9a9b06986 100644 --- a/resources/profiles/BBL/filament/Generic PHA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PHA @BBL X2D.json @@ -1,274 +1,95 @@ { - "type": "filament", - "name": "Generic PHA @BBL X2D", - "inherits": "Generic PHA @base", - "from": "system", - "setting_id": "GFSR98_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PHA @BBL X2D", + "inherits": "Generic PHA @base", + "from": "system", + "setting_id": "GFSR98_07", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PHA @base.json b/resources/profiles/BBL/filament/Generic PHA @base.json index fe2373ff7c..c78cbd9a6e 100644 --- a/resources/profiles/BBL/filament/Generic PHA @base.json +++ b/resources/profiles/BBL/filament/Generic PHA @base.json @@ -1,8 +1,8 @@ { - "type": "filament", - "name": "Generic PHA @base", - "inherits": "fdm_filament_pha", - "from": "system", - "filament_id": "OF74KeQR", - "instantiation": "false" -} + "type": "filament", + "name": "Generic PHA @base", + "inherits": "fdm_filament_pha", + "from": "system", + "filament_id": "OF74KeQR", + "instantiation": "false" +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json index aa26520b18..deefbc71d4 100644 --- a/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @0.2 nozzle.json @@ -1,23 +1,23 @@ { - "type": "filament", - "name": "Generic PLA @0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.6" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "type": "filament", + "name": "Generic PLA @0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.6" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1 0.2 nozzle.json index 150e05abb7..b8a5916bc3 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PLA @BBL A1 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PLA @BBL A1 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1.json index a921481845..864344b169 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Generic PLA @BBL A1", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA @BBL A1", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json index 30a5984880..5d3c65d906 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PLA @BBL A1M 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PLA @BBL A1M 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json index 7592e4d054..783863506c 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A1M.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Generic PLA @BBL A1M", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA @BBL A1M", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL A2L 0.2 nozzle.json index f5207ee1d0..a39086e72a 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A2L 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "Generic PLA @BBL A2L 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PLA @BBL A2L 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL A2L.json b/resources/profiles/BBL/filament/Generic PLA @BBL A2L.json index d5c951a78f..30427dea0c 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL A2L.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Generic PLA @BBL A2L", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_24", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PLA @BBL A2L", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_24", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.2 nozzle.json index 02dd3a5f48..634dc781c4 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.2 nozzle.json @@ -1,180 +1,91 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2C 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_22", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2C 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_22", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.4 nozzle.json index 468699489e..9489ef729a 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2C 0.4 nozzle.json @@ -1,180 +1,122 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2C 0.4 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_20", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2C 0.4 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_20", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2C.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2C.json index 5e0433e39a..334c18e36c 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2C.json @@ -1,181 +1,123 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2C", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_21", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2C", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_21", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json index 23d0426d92..1b21eb75be 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2D 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2D 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2D 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json index 02ae1c7228..92d1d6d5c7 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2D.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2D", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2D", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2DP 0.2 nozzle.json index 7b9e9d498b..7fec3e7924 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2DP 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2DP 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2DP.json index a82e91dff2..86f0e63424 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2DP", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2DP", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2S 0.2 nozzle.json index 06e2434064..c04a5a7f1d 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2S 0.2 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2S 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2S 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL H2S.json b/resources/profiles/BBL/filament/Generic PLA @BBL H2S.json index 440384f4e7..d43e487d30 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL H2S.json @@ -1,136 +1,96 @@ { - "type": "filament", - "name": "Generic PLA @BBL H2S", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL H2S", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL P2S 0.2 nozzle.json index e74986f789..2fdaa256f9 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL P2S 0.2 nozzle.json @@ -1,171 +1,66 @@ { - "type": "filament", - "name": "Generic PLA @BBL P2S 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL P2S 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL P2S.json b/resources/profiles/BBL/filament/Generic PLA @BBL P2S.json index 2272e1b769..1590ded45a 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL P2S.json @@ -1,173 +1,73 @@ { - "type": "filament", - "name": "Generic PLA @BBL P2S", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL P2S", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.2 nozzle.json index e4869e8bdd..0c2606bf20 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.2 nozzle.json @@ -1,272 +1,83 @@ { - "type": "filament", - "name": "Generic PLA @BBL X2D 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_19", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6", - "1.6", - "1.6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL X2D 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_19", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6", + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.4 nozzle.json index 0459c3fd56..d24b8e890c 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL X2D 0.4 nozzle.json @@ -1,272 +1,93 @@ { - "type": "filament", - "name": "Generic PLA @BBL X2D 0.4 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL X2D 0.4 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @BBL X2D.json b/resources/profiles/BBL/filament/Generic PLA @BBL X2D.json index 5504d3dd84..1faa70bed2 100644 --- a/resources/profiles/BBL/filament/Generic PLA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PLA @BBL X2D.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PLA @BBL X2D", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_18", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA @BBL X2D", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA @base.json b/resources/profiles/BBL/filament/Generic PLA @base.json index 8e166fe212..285c3aa9eb 100644 --- a/resources/profiles/BBL/filament/Generic PLA @base.json +++ b/resources/profiles/BBL/filament/Generic PLA @base.json @@ -1,18 +1,18 @@ { - "type": "filament", - "name": "Generic PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFDSrzZ8", - "instantiation": "false", - "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", - "filament_flow_ratio": [ - "0.98" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFDSrzZ8", + "instantiation": "false", + "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", + "filament_flow_ratio": [ + "0.98" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1 0.2 nozzle.json index fbfb00551d..5e696d1ef1 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL A1 0.2 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL A1 0.2 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1.json index 2f4b1e6e3d..08abf18047 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL A1", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL A1", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json index 74a56574b5..b043e52658 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M 0.2 nozzle.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle", - "inherits": "Generic PLA High Speed @BBL A1M", - "from": "system", - "setting_id": "GFSL95_07", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL A1M 0.2 nozzle", + "inherits": "Generic PLA High Speed @BBL A1M", + "from": "system", + "setting_id": "GFSL95_07", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json index cab5fbbedc..a052820c45 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL A1M", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL A1M", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json index a10f03de18..868cae23cf 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL A2L 0.2 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_22", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "40" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL A2L 0.2 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_22", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "40" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L.json index d3bf1ac5b8..88ff48657c 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL A2L.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL A2L", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_23", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "6" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL A2L", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_23", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "6" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json index 5a8a52641a..736f9d5b73 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.2 nozzle.json @@ -1,180 +1,91 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2C 0.2 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_21", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2C 0.2 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_21", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json index e3114fb4a5..1978b96cf3 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C 0.4 nozzle.json @@ -1,183 +1,125 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2C 0.4 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_19", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2C 0.4 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_19", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C.json index bdb8905b0d..e7083107ef 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2C.json @@ -1,184 +1,126 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2C", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_20", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2C", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_20", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json index d9f2031f98..81eb3070fb 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2D 0.2 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2D 0.2 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json index 2b61d46727..98e43fec75 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2D.json @@ -1,136 +1,66 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2D", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2D", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json index ec808a7446..6420060c97 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2DP 0.2 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2DP 0.2 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP.json index 8191d93f7f..04df3f4e6f 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2DP.json @@ -1,136 +1,59 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2DP", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_14", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2DP", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S 0.2 nozzle.json index 745a286152..23633f4ce4 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2S 0.2 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2S 0.2 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S.json index 79b0dead71..97706a18ab 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL H2S.json @@ -1,139 +1,99 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL H2S", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL H2S", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json index 8b71e5209b..ae9b7cd6e4 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P 0.2 nozzle.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle", - "inherits": "Generic PLA High Speed @BBL P1P", - "from": "system", - "setting_id": "GFSL95_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL P1P 0.2 nozzle", + "inherits": "Generic PLA High Speed @BBL P1P", + "from": "system", + "setting_id": "GFSL95_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json index a4ac9709ae..9c36600779 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P1P.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL P1P", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL P1P", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json index 1f5f5644ab..ae545f8d76 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S 0.2 nozzle.json @@ -1,174 +1,69 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL P2S 0.2 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_13", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL P2S 0.2 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S.json index 546e65ce27..9e45a0db6d 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL P2S.json @@ -1,176 +1,76 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL P2S", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_12", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL P2S", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json index 9694ec5bbb..4d1639b736 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C 0.2 nozzle.json @@ -1,18 +1,18 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle", - "inherits": "Generic PLA High Speed @BBL X1C", - "from": "system", - "setting_id": "GFSL95_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL X1C 0.2 nozzle", + "inherits": "Generic PLA High Speed @BBL X1C", + "from": "system", + "setting_id": "GFSL95_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json index 0248772693..0ceae719e0 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X1C.json @@ -1,136 +1,63 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL X1C", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL X1C", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json index df1a884f06..f963772aac 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.2 nozzle.json @@ -1,42 +1,42 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL X2D 0.2 nozzle", - "inherits": "Generic PLA High Speed @BBL X1C", - "from": "system", - "setting_id": "GFSL95_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "retraction_distances_when_ec": [ - "3", - "3" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL X2D 0.2 nozzle", + "inherits": "Generic PLA High Speed @BBL X1C", + "from": "system", + "setting_id": "GFSL95_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "retraction_distances_when_ec": [ + "3", + "3" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json index a094687796..198ad36a8d 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json @@ -1,275 +1,96 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL X2D 0.4 nozzle", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_16", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "slow_down_layer_time": [ - "4" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL X2D 0.4 nozzle", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D.json b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D.json index 180ace5a9f..1115381a50 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @BBL X2D.json @@ -1,276 +1,97 @@ { - "type": "filament", - "name": "Generic PLA High Speed @BBL X2D", - "inherits": "Generic PLA High Speed @base", - "from": "system", - "setting_id": "GFSL95_17", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "18", - "18", - "18", - "18" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "slow_down_layer_time": [ - "4" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @BBL X2D", + "inherits": "Generic PLA High Speed @base", + "from": "system", + "setting_id": "GFSL95_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA High Speed @base.json b/resources/profiles/BBL/filament/Generic PLA High Speed @base.json index 9fd751ae44..fc6c29c211 100644 --- a/resources/profiles/BBL/filament/Generic PLA High Speed @base.json +++ b/resources/profiles/BBL/filament/Generic PLA High Speed @base.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "Generic PLA High Speed @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFmpMwxS", - "instantiation": "false", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "slow_down_layer_time": [ - "8" - ] -} + "type": "filament", + "name": "Generic PLA High Speed @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFmpMwxS", + "instantiation": "false", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1.json index e57cb22e16..0e6eb66ffc 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL A1", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "7.5" - ], - "filament_retraction_length": [ - "0.5" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL A1", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "7.5" + ], + "filament_retraction_length": [ + "0.5" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json index d2e5d12bb5..ba7582a9e1 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A1M.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL A1M", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "7.5" - ], - "filament_retraction_length": [ - "0.5" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL A1M", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "7.5" + ], + "filament_retraction_length": [ + "0.5" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A2L.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A2L.json index e8db9edc9a..9a5a78e075 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL A2L.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL A2L", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "filament_max_volumetric_speed": [ - "7.5" - ], - "filament_retraction_length": [ - "0.5" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL A2L", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "filament_max_volumetric_speed": [ + "7.5" + ], + "filament_retraction_length": [ + "0.5" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json index 730b5e0f02..c48a46337c 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C 0.4 nozzle.json @@ -1,180 +1,122 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL H2C 0.4 nozzle", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL H2C 0.4 nozzle", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C.json index 1d75400976..61201273f0 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2C.json @@ -1,181 +1,123 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL H2C", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.99", - "0.99" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL H2C", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.99", + "0.99", + "0.99" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json index 5d8001bda9..284b27ee8d 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2D.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL H2D", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_02", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL H2D", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_02", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2DP.json index d27582671e..dbbc13a500 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL H2DP", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL H2DP", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2S.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2S.json index 987ad0b4c0..100e03b3c9 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL H2S.json @@ -1,139 +1,99 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL H2S", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_04", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "1", - "1" - ], - "filament_wipe_distance": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "Spiral Lift", - "Spiral Lift" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL H2S", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_04", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "filament_wipe": [ + "1", + "1", + "1" + ], + "filament_wipe_distance": [ + "1", + "1", + "1" + ], + "filament_z_hop_types": [ + "Spiral Lift", + "Spiral Lift", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL P2S.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL P2S.json index 6aa7e0cc4b..28597851fb 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL P2S.json @@ -1,173 +1,78 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL P2S", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_03", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.5", - "0.5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL P2S", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_03", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.5", + "0.5", + "0.5" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json index 22ac6a6d7a..bf5faa157c 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json @@ -1,272 +1,101 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL X2D 0.4 nozzle", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.5", - "0.5", - "0.5", - "0.5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5", - "7.5", - "7.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL X2D 0.4 nozzle", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5", + "7.5", + "7.5", + "7.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.5", + "0.5", + "0.5", + "0.5", + "0.5", + "0.5" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D.json b/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D.json index 05fa8b0263..5e82201ebf 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @BBL X2D.json @@ -1,273 +1,102 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL X2D", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL96_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.5", - "0.5", - "0.5", - "0.5" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.98", - "0.98", - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "7.5", - "7.5", - "7.5", - "7.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL X2D", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL96_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5", + "7.5", + "7.5", + "7.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.5", + "0.5", + "0.5", + "0.5", + "0.5", + "0.5" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk @base.json b/resources/profiles/BBL/filament/Generic PLA Silk @base.json index 41bc486e88..d287b098a4 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk @base.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk @base.json @@ -1,24 +1,24 @@ { - "type": "filament", - "name": "Generic PLA Silk @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFesA6rF", - "instantiation": "false", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", - "filament_flow_ratio": [ - "0.98" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "8" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PLA Silk @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFesA6rF", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_flow_ratio": [ + "0.98" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA Silk.json b/resources/profiles/BBL/filament/Generic PLA Silk.json index 9758fd1517..b9dce32b37 100644 --- a/resources/profiles/BBL/filament/Generic PLA Silk.json +++ b/resources/profiles/BBL/filament/Generic PLA Silk.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Generic PLA Silk", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL99_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "7.5" - ], - "filament_retraction_length": [ - "0.5" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "type": "filament", + "name": "Generic PLA Silk", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL99_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "7.5" + ], + "filament_retraction_length": [ + "0.5" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1.json index 540e54edd4..e53f2d35c1 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL A1", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL A1", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json index 8483f075f8..b5b005424c 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL A1M", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL A1M", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A2L.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A2L.json index 9a94369480..ea16b27319 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL A2L.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL A2L", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_11", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_flush_temp_fast": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL A2L", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_11", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_flush_temp_fast": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json index 98e1f99a5b..f2aeb5d559 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C 0.4 nozzle.json @@ -1,174 +1,91 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL H2C 0.4 nozzle", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL H2C 0.4 nozzle", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C.json index 29befe21c2..f203c1b94d 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2C.json @@ -1,175 +1,92 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL H2C", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_retract_length_nc": [ - "18", - "18" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL H2C", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_retract_length_nc": [ + "18", + "18", + "18" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json index 40f7ee140d..9629844415 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2D.json @@ -1,133 +1,58 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL H2D", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_02", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL H2D", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_02", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2DP.json index ab44a93115..25176e2b10 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2DP.json @@ -1,133 +1,52 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL H2DP", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL H2DP", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2S.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2S.json index 4ba41919e5..7bdd82a338 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL H2S.json @@ -1,133 +1,73 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL H2S", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "0" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL H2S", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "nil", + "0", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL P2S.json index 3d56a89a63..adef1f79ab 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL P2S.json @@ -1,173 +1,68 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL P2S", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_03", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL P2S", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_03", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json index 89b2b2c72e..07f760089c 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json @@ -1,272 +1,93 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL X2D 0.4 nozzle", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL X2D 0.4 nozzle", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D.json index 823f303441..32f7c7edc2 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @BBL X2D.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL X2D", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL X2D", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF @base.json b/resources/profiles/BBL/filament/Generic PLA-CF @base.json index ffbcaad864..c9194ad76b 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF @base.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PLA-CF @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFWbdGsC", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "45" - ], - "cool_plate_temp_initial_layer": [ - "45" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_type": [ - "PLA-CF" - ], - "required_nozzle_HRC": [ - "40" - ], - "supertack_plate_temp": [ - "50" - ], - "supertack_plate_temp_initial_layer": [ - "50" - ], - "slow_down_layer_time": [ - "7" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PLA-CF @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFWbdGsC", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_type": [ + "PLA-CF" + ], + "required_nozzle_HRC": [ + "40" + ], + "supertack_plate_temp": [ + "50" + ], + "supertack_plate_temp_initial_layer": [ + "50" + ], + "slow_down_layer_time": [ + "7" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA-CF.json b/resources/profiles/BBL/filament/Generic PLA-CF.json index 0ad045f0f9..198072a86d 100644 --- a/resources/profiles/BBL/filament/Generic PLA-CF.json +++ b/resources/profiles/BBL/filament/Generic PLA-CF.json @@ -1,25 +1,25 @@ { - "type": "filament", - "name": "Generic PLA-CF", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "type": "filament", + "name": "Generic PLA-CF", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PLA.json b/resources/profiles/BBL/filament/Generic PLA.json index 4b99799313..ed6d69aa8e 100644 --- a/resources/profiles/BBL/filament/Generic PLA.json +++ b/resources/profiles/BBL/filament/Generic PLA.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic PLA", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "type": "filament", + "name": "Generic PLA", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL A1.json b/resources/profiles/BBL/filament/Generic PP @BBL A1.json index 9d9aba8e63..4c4b6c1710 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL A1.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PP @BBL A1", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_01", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PP @BBL A1", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_01", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL A1M.json b/resources/profiles/BBL/filament/Generic PP @BBL A1M.json index db378f2fb1..3c4907f8c9 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL A1M.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PP @BBL A1M", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_02", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PP @BBL A1M", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_02", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL A2L.json b/resources/profiles/BBL/filament/Generic PP @BBL A2L.json index e8ea2d9f54..11bf9a7c04 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL A2L.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Generic PP @BBL A2L", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_11", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "pre_start_fan_time": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PP @BBL A2L", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_11", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "pre_start_fan_time": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP @BBL H2C 0.4 nozzle.json index f82945ba5d..c26dae20e7 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL H2C 0.4 nozzle.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic PP @BBL H2C 0.4 nozzle", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_09", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "195", - "195" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP @BBL H2C 0.4 nozzle", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_09", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "195", + "195", + "195" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL H2C.json b/resources/profiles/BBL/filament/Generic PP @BBL H2C.json index 7904a38119..0c440b4df4 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL H2C.json @@ -1,179 +1,96 @@ { - "type": "filament", - "name": "Generic PP @BBL H2C", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_10", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "195", - "195" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP @BBL H2C", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_10", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "195", + "195", + "195" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL H2D.json b/resources/profiles/BBL/filament/Generic PP @BBL H2D.json index 9f9f1a90af..2410ce3cc9 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL H2D.json @@ -1,134 +1,64 @@ { - "type": "filament", - "name": "Generic PP @BBL H2D", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_04", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP @BBL H2D", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_04", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PP @BBL H2DP.json index a50d682f44..b88298b5eb 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL H2DP.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Generic PP @BBL H2DP", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_06", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP @BBL H2DP", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_06", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP @BBL H2S 0.4 nozzle.json index 5ba388e5ae..7bf4a1d6b4 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL H2S 0.4 nozzle.json @@ -1,137 +1,77 @@ { - "type": "filament", - "name": "Generic PP @BBL H2S 0.4 nozzle", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_12", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP @BBL H2S 0.4 nozzle", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_12", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL P2S.json b/resources/profiles/BBL/filament/Generic PP @BBL P2S.json index 502e2baee2..0a37f15e29 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL P2S.json @@ -1,174 +1,74 @@ { - "type": "filament", - "name": "Generic PP @BBL P2S", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_05", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP @BBL P2S", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_05", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL X1C.json b/resources/profiles/BBL/filament/Generic PP @BBL X1C.json index 41d0a02f28..9c452c18e3 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL X1C.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "Generic PP @BBL X1C", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_00", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PP @BBL X1C", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP @BBL X2D 0.4 nozzle.json index 1dc84c927b..8f46f07f1d 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL X2D 0.4 nozzle.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PP @BBL X2D 0.4 nozzle", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "235" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "235", - "235", - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235", - "235", - "235" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP @BBL X2D 0.4 nozzle", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_07", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "235" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @BBL X2D.json b/resources/profiles/BBL/filament/Generic PP @BBL X2D.json index 27a96daa13..61590c5403 100644 --- a/resources/profiles/BBL/filament/Generic PP @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PP @BBL X2D.json @@ -1,274 +1,95 @@ { - "type": "filament", - "name": "Generic PP @BBL X2D", - "inherits": "Generic PP @base", - "from": "system", - "setting_id": "GFSP97_08", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12", - "12", - "12" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "235" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "235", - "235", - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235", - "235", - "235" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP @BBL X2D", + "inherits": "Generic PP @base", + "from": "system", + "setting_id": "GFSP97_08", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "235" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP @base.json b/resources/profiles/BBL/filament/Generic PP @base.json index 94847d67e9..218bc35093 100644 --- a/resources/profiles/BBL/filament/Generic PP @base.json +++ b/resources/profiles/BBL/filament/Generic PP @base.json @@ -1,8 +1,8 @@ { - "type": "filament", - "name": "Generic PP @base", - "inherits": "fdm_filament_pp", - "from": "system", - "filament_id": "OF1UNk9P", - "instantiation": "false" -} + "type": "filament", + "name": "Generic PP @base", + "inherits": "fdm_filament_pp", + "from": "system", + "filament_id": "OF1UNk9P", + "instantiation": "false" +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL A1.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL A1.json index b74a4ce593..3c3ad6cfd1 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL A1.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL A1", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_01", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL A1", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_01", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C 0.4 nozzle.json index 31dba2afa7..8b357127db 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C 0.4 nozzle.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL H2C 0.4 nozzle", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_07", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "195", - "195" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL H2C 0.4 nozzle", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_07", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "195", + "195", + "195" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C.json index 1a34b1491c..777889fdd3 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2C.json @@ -1,179 +1,96 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL H2C", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_08", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "195", - "195" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL H2C", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_08", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "195", + "195", + "195" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json index 8065f9ce90..80e603bd6d 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2D.json @@ -1,134 +1,64 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL H2D", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_02", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL H2D", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_02", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2DP.json index 96aa86e940..c34bcd9070 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2DP.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL H2DP", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_04", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL H2DP", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_04", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2S 0.4 nozzle.json index de8f2b55e5..d4cd1841ef 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL H2S 0.4 nozzle.json @@ -1,137 +1,77 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL H2S 0.4 nozzle", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_10", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL H2S 0.4 nozzle", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_10", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL P2S.json index 4fae174f0f..5c071468df 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL P2S.json @@ -1,174 +1,74 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL P2S", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_03", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL P2S", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_03", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL X1C.json index 3daa064fb8..3f7b641a99 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL X1C.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL X1C", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_00", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL X1C", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D 0.4 nozzle.json index 04b944dac3..b3dc273d46 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D 0.4 nozzle.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL X2D 0.4 nozzle", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "235" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "235", - "235", - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235", - "235", - "235" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL X2D 0.4 nozzle", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_05", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "235" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D.json index 592172649d..ce02b609b1 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @BBL X2D.json @@ -1,274 +1,95 @@ { - "type": "filament", - "name": "Generic PP-CF @BBL X2D", - "inherits": "Generic PP-CF @base", - "from": "system", - "setting_id": "GFSP96_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "235" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "235", - "235", - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235", - "235", - "235" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-CF @BBL X2D", + "inherits": "Generic PP-CF @base", + "from": "system", + "setting_id": "GFSP96_06", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "235" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-CF @base.json b/resources/profiles/BBL/filament/Generic PP-CF @base.json index e04ee56b6d..c6c61c735b 100644 --- a/resources/profiles/BBL/filament/Generic PP-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PP-CF @base.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Generic PP-CF @base", - "inherits": "fdm_filament_pp", - "from": "system", - "filament_id": "OFXkm8q1", - "instantiation": "false", - "filament_cost": [ - "77.99" - ], - "filament_density": [ - "1.01" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_type": [ - "PP-CF" - ] -} + "type": "filament", + "name": "Generic PP-CF @base", + "inherits": "fdm_filament_pp", + "from": "system", + "filament_id": "OFXkm8q1", + "instantiation": "false", + "filament_cost": [ + "77.99" + ], + "filament_density": [ + "1.01" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PP-CF" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL A1.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL A1.json index 9b1e043775..b8d3231f45 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL A1.json @@ -1,14 +1,14 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL A1", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_00", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL A1", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_00", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C 0.4 nozzle.json index 2c96691c1e..70a93a056d 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C 0.4 nozzle.json @@ -1,178 +1,95 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL H2C 0.4 nozzle", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_06", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "195", - "195" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL H2C 0.4 nozzle", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_06", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "195", + "195", + "195" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C.json index 1622a69a3d..39ca551932 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2C.json @@ -1,179 +1,96 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL H2C", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_07", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "195", - "195" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "50" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL H2C", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_07", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "195", + "195", + "195" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json index ad2153589d..8c55e39dc0 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2D.json @@ -1,134 +1,64 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL H2D", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_01", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL H2D", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_01", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2DP.json index 33f9777169..e82993c8d3 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2DP.json @@ -1,134 +1,57 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL H2DP", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_03", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL H2DP", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_03", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2S 0.4 nozzle.json index b4b27abbad..b9710fb002 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL H2S 0.4 nozzle.json @@ -1,137 +1,77 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL H2S 0.4 nozzle", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_9", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL H2S 0.4 nozzle", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_9", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "50" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL P2S.json index 0ee1c076ae..c1a588fc91 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL P2S.json @@ -1,174 +1,74 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL P2S", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_02", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL P2S", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_02", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL X1C.json index 7bdaadab6b..852b2b5434 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL X1C.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL X1C", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP97_03", - "instantiation": "true", - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL X1C", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP97_03", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D 0.4 nozzle.json index d6291e8f70..c2810237dd 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D 0.4 nozzle.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL X2D 0.4 nozzle", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_04", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "235" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "235", - "235", - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235", - "235", - "235" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL X2D 0.4 nozzle", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_04", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "235" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D.json index 23f2e79eba..bd2d1c3ed7 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @BBL X2D.json @@ -1,274 +1,95 @@ { - "type": "filament", - "name": "Generic PP-GF @BBL X2D", - "inherits": "Generic PP-GF @base", - "from": "system", - "setting_id": "GFSP95_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "235" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "235", - "235", - "235", - "235" - ], - "nozzle_temperature_initial_layer": [ - "235", - "235", - "235", - "235" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PP-GF @BBL X2D", + "inherits": "Generic PP-GF @base", + "from": "system", + "setting_id": "GFSP95_05", + "instantiation": "true", + "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "235" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "nozzle_temperature_initial_layer": [ + "235", + "235", + "235", + "235", + "235", + "235" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PP-GF @base.json b/resources/profiles/BBL/filament/Generic PP-GF @base.json index 5d82e8223a..8602b343b1 100644 --- a/resources/profiles/BBL/filament/Generic PP-GF @base.json +++ b/resources/profiles/BBL/filament/Generic PP-GF @base.json @@ -1,20 +1,20 @@ { - "type": "filament", - "name": "Generic PP-GF @base", - "inherits": "fdm_filament_pp", - "from": "system", - "filament_id": "OFsijjtH", - "instantiation": "false", - "filament_cost": [ - "59.99" - ], - "filament_density": [ - "1.05" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_type": [ - "PP-GF" - ] -} + "type": "filament", + "name": "Generic PP-GF @base", + "inherits": "fdm_filament_pp", + "from": "system", + "filament_id": "OFsijjtH", + "instantiation": "false", + "filament_cost": [ + "59.99" + ], + "filament_density": [ + "1.05" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PP-GF" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json index f5a311d686..6307ce8fd1 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C 0.4 nozzle.json @@ -1,180 +1,97 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL H2C 0.4 nozzle", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL H2C 0.4 nozzle", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C.json index 70355a7fd4..99fbafe181 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2C.json @@ -1,184 +1,101 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL H2C", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_printable": [ - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL H2C", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5" + ], + "filament_printable": [ + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json index 42fda3ee7f..5798bede95 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2D.json @@ -1,139 +1,69 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL H2D", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL H2D", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2DP.json index a5291800ef..ab2c95d6ec 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2DP.json @@ -1,139 +1,62 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL H2DP", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL H2DP", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2S 0.4 nozzle.json index 78939aa32b..1424641376 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL H2S 0.4 nozzle.json @@ -1,136 +1,76 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL H2S 0.4 nozzle", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_9", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "70" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL H2S 0.4 nozzle", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_9", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL P2S.json index 89143e04cc..77b17fb0d8 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL P2S.json @@ -1,173 +1,73 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL P2S", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL P2S", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1C.json index 75e3c21a5b..6b543ecd14 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1C.json @@ -1,136 +1,63 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL X1C", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_00", - "instantiation": "true", - "fan_max_speed": [ - "35" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL X1C", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_00", + "instantiation": "true", + "fan_max_speed": [ + "35" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json index 5570916551..636204070f 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X1E.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL X1E", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_01", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL X1E", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json index 483b8a1400..c171b03fe9 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D 0.4 nozzle.json @@ -1,275 +1,96 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL X2D 0.4 nozzle", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5", - "6.5", - "6.5" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL X2D 0.4 nozzle", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5", + "6.5", + "6.5", + "6.5" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D.json index 077782b7cf..97b164c7a4 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @BBL X2D.json @@ -1,276 +1,97 @@ { - "type": "filament", - "name": "Generic PPA-CF @BBL X2D", - "inherits": "Generic PPA-CF @base", - "from": "system", - "setting_id": "GFSN97_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "fan_max_speed": [ - "35" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6.5", - "6.5", - "6.5", - "6.5" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "overhang_fan_threshold": [ - "25%" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PPA-CF @BBL X2D", + "inherits": "Generic PPA-CF @base", + "from": "system", + "setting_id": "GFSN97_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "fan_max_speed": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5", + "6.5", + "6.5", + "6.5" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-CF @base.json b/resources/profiles/BBL/filament/Generic PPA-CF @base.json index 78ad9bca5e..03fd113b86 100644 --- a/resources/profiles/BBL/filament/Generic PPA-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PPA-CF @base.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Generic PPA-CF @base", - "inherits": "fdm_filament_ppa", - "from": "system", - "filament_id": "OF8tPByX", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "filament_max_volumetric_speed": [ - "6" - ], - "filament_vendor": [ - "Generic" - ] -} + "type": "filament", + "name": "Generic PPA-CF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "OF8tPByX", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_max_volumetric_speed": [ + "6" + ], + "filament_vendor": [ + "Generic" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json index 1b85c2abc9..9e5993d821 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C 0.4 nozzle.json @@ -1,174 +1,91 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL H2C 0.4 nozzle", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_07", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL H2C 0.4 nozzle", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_07", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C.json index f9d47164c5..d1c1aca5fb 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2C.json @@ -1,175 +1,92 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL H2C", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "250", - "250" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "temperature_vitrification": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL H2C", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "250", + "250", + "250" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json index 7861a305fb..17ddc9fd88 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2D.json @@ -1,130 +1,60 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL H2D", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_02", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL H2D", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_02", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2DP.json index 69f266bf09..490edf6139 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2DP.json @@ -1,130 +1,53 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL H2DP", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_04", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL H2DP", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_04", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2S 0.4 nozzle.json index f85950f894..5e56752e32 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL H2S 0.4 nozzle.json @@ -1,130 +1,70 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL H2S 0.4 nozzle", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_9", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab H2S 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL H2S 0.4 nozzle", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_9", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "temperature_vitrification": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab H2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL P2S.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL P2S.json index 408fca5771..2bc84fad1a 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL P2S.json @@ -1,167 +1,67 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL P2S", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_03", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL P2S", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_03", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json index e9bf8354f6..af08fdb97e 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1C.json @@ -1,130 +1,57 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL X1C", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL X1C", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json index 40de09a1db..2b921dee14 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X1E.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL X1E", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_01", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL X1E", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_01", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json index faa187791e..f7f2359921 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D 0.4 nozzle.json @@ -1,266 +1,87 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL X2D 0.4 nozzle", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL X2D 0.4 nozzle", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_05", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D.json b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D.json index dafb6822f0..57ac55b20d 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @BBL X2D.json @@ -1,267 +1,88 @@ { - "type": "filament", - "name": "Generic PPA-GF @BBL X2D", - "inherits": "Generic PPA-GF @base", - "from": "system", - "setting_id": "GFSN96_06", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "3", - "3", - "4", - "4" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "chamber_temperatures": [ - "60" - ], - "filament_flow_ratio": [ - "0.96", - "0.96", - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "6", - "6", - "6", - "6" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "290" - ], - "nozzle_temperature": [ - "290", - "290", - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290", - "290", - "290" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PPA-GF @BBL X2D", + "inherits": "Generic PPA-GF @base", + "from": "system", + "setting_id": "GFSN96_06", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "290" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", + "290" + ], + "retraction_distances_when_ec": [ + "3", + "3", + "3", + "4", + "4", + "4" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPA-GF @base.json b/resources/profiles/BBL/filament/Generic PPA-GF @base.json index 72ff99cd16..06129b286a 100644 --- a/resources/profiles/BBL/filament/Generic PPA-GF @base.json +++ b/resources/profiles/BBL/filament/Generic PPA-GF @base.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "Generic PPA-GF @base", - "inherits": "fdm_filament_ppa", - "from": "system", - "filament_id": "OF8Tlg47", - "instantiation": "false", - "filament_max_volumetric_speed": [ - "6" - ], - "filament_type": [ - "PPA-GF" - ], - "filament_vendor": [ - "Generic" - ] -} + "type": "filament", + "name": "Generic PPA-GF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "OF8Tlg47", + "instantiation": "false", + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PPA-GF" + ], + "filament_vendor": [ + "Generic" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPS @BBL H2C 0.4 nozzle.json index 145ea2ecd6..2367b12fbb 100644 --- a/resources/profiles/BBL/filament/Generic PPS @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPS @BBL H2C 0.4 nozzle.json @@ -1,171 +1,83 @@ { - "type": "filament", - "name": "Generic PPS @BBL H2C 0.4 nozzle", - "inherits": "Generic PPS @base", - "from": "system", - "setting_id": "GFST97_03", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "4", - "4" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "280", - "280" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "temperature_vitrification": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS @BBL H2C 0.4 nozzle", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_03", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "4", + "4", + "4" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "280", + "280", + "280" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "temperature_vitrification": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL H2C.json b/resources/profiles/BBL/filament/Generic PPS @BBL H2C.json index 5f90d205f1..5240e7ba6b 100644 --- a/resources/profiles/BBL/filament/Generic PPS @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PPS @BBL H2C.json @@ -1,172 +1,84 @@ { - "type": "filament", - "name": "Generic PPS @BBL H2C", - "inherits": "Generic PPS @base", - "from": "system", - "setting_id": "GFST97_04", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "4", - "4" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "280", - "280" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "temperature_vitrification": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS @BBL H2C", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_04", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "4", + "4", + "4" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "280", + "280", + "280" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "temperature_vitrification": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json index be9c5e6cd0..092e0834f5 100644 --- a/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPS @BBL H2D.json @@ -1,127 +1,52 @@ { - "type": "filament", - "name": "Generic PPS @BBL H2D", - "inherits": "Generic PPS @base", - "from": "system", - "setting_id": "GFST97_01", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "4", - "4" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS @BBL H2D", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_01", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "4", + "4", + "4" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PPS @BBL H2DP.json index c289624213..8b260eb50d 100644 --- a/resources/profiles/BBL/filament/Generic PPS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PPS @BBL H2DP.json @@ -1,127 +1,46 @@ { - "type": "filament", - "name": "Generic PPS @BBL H2DP", - "inherits": "Generic PPS @base", - "from": "system", - "setting_id": "GFST97_02", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "4", - "4" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS @BBL H2DP", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_02", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "4", + "4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPS @BBL H2S 0.4 nozzle.json index 21aa101939..0560dab8cb 100644 --- a/resources/profiles/BBL/filament/Generic PPS @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPS @BBL H2S 0.4 nozzle.json @@ -1,127 +1,62 @@ { - "type": "filament", - "name": "Generic PPS @BBL H2S 0.4 nozzle", - "inherits": "Generic PPS @base", - "from": "system", - "setting_id": "GFST97_5", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "4", - "4" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "temperature_vitrification": [ - "80" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab H2S 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PPS @BBL H2S 0.4 nozzle", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_5", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "4", + "4", + "4" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "temperature_vitrification": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab H2S 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json index f9fb032496..deace32712 100644 --- a/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic PPS @BBL X1E.json @@ -1,121 +1,44 @@ { - "type": "filament", - "name": "Generic PPS @BBL X1E", - "inherits": "Generic PPS @base", - "from": "system", - "setting_id": "GFST97_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "4", - "4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PPS @BBL X1E", + "inherits": "Generic PPS @base", + "from": "system", + "setting_id": "GFST97_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "4", + "4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS @base.json b/resources/profiles/BBL/filament/Generic PPS @base.json index 08ba73cba8..ab37ca10a9 100644 --- a/resources/profiles/BBL/filament/Generic PPS @base.json +++ b/resources/profiles/BBL/filament/Generic PPS @base.json @@ -1,9 +1,9 @@ { - "type": "filament", - "name": "Generic PPS @base", - "inherits": "fdm_filament_pps", - "from": "system", - "filament_id": "OFq9svOz", + "type": "filament", + "name": "Generic PPS @base", + "inherits": "fdm_filament_pps", + "from": "system", + "filament_id": "OFq9svOz", "instantiation": "false", "filament_dev_chamber_drying_bed_temperature": [ "90" @@ -26,4 +26,4 @@ "filament_dev_drying_softening_temperature": [ "85" ] -} +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json index 379b9fb35b..0d472038c0 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C 0.4 nozzle.json @@ -1,168 +1,80 @@ { - "type": "filament", - "name": "Generic PPS-CF @BBL H2C 0.4 nozzle", - "inherits": "Generic PPS-CF @base", - "from": "system", - "setting_id": "GFST98_03", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "280", - "280" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS-CF @BBL H2C 0.4 nozzle", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_03", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "280", + "280", + "280" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C.json index 3d2bf461d6..1f02c3f71f 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2C.json @@ -1,172 +1,84 @@ { - "type": "filament", - "name": "Generic PPS-CF @BBL H2C", - "inherits": "Generic PPS-CF @base", - "from": "system", - "setting_id": "GFST98_04", - "instantiation": "true", - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_printable": [ - "1" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "280", - "280" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_min_speed": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS-CF @BBL H2C", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_04", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_printable": [ + "1" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "280", + "280", + "280" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json index fe0564d6f6..ecdb04064c 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2D.json @@ -1,130 +1,52 @@ { - "type": "filament", - "name": "Generic PPS-CF @BBL H2D", - "inherits": "Generic PPS-CF @base", - "from": "system", - "setting_id": "GFST98_01", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS-CF @BBL H2D", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_01", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2DP.json index fae35ff81c..1b93a87945 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2DP.json @@ -1,130 +1,46 @@ { - "type": "filament", - "name": "Generic PPS-CF @BBL H2DP", - "inherits": "Generic PPS-CF @base", - "from": "system", - "setting_id": "GFST98_02", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_printable": [ - "1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PPS-CF @BBL H2DP", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_02", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "3", + "3" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2S 0.4 nozzle.json index 07c077e7c7..634e11b2d5 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL H2S 0.4 nozzle.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "Generic PPS-CF @BBL H2S 0.4 nozzle", - "inherits": "Generic PPS-CF @base", - "from": "system", - "setting_id": "GFST98_5", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle" - ] -} + "type": "filament", + "name": "Generic PPS-CF @BBL H2S 0.4 nozzle", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_5", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "3", + "3", + "3" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "320", + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320", + "320" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json b/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json index e08e2589b6..a0ef51c9a4 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @BBL X1E.json @@ -1,121 +1,44 @@ { - "type": "filament", - "name": "Generic PPS-CF @BBL X1E", - "inherits": "Generic PPS-CF @base", - "from": "system", - "setting_id": "GFST98_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "3", - "3" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "320", - "320" - ], - "nozzle_temperature_initial_layer": [ - "320", - "320" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle" - ] -} + "type": "filament", + "name": "Generic PPS-CF @BBL X1E", + "inherits": "Generic PPS-CF @base", + "from": "system", + "setting_id": "GFST98_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3", + "3" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "320", + "320" + ], + "nozzle_temperature_initial_layer": [ + "320", + "320" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PPS-CF @base.json b/resources/profiles/BBL/filament/Generic PPS-CF @base.json index 76aab2de8b..975c8f7da8 100644 --- a/resources/profiles/BBL/filament/Generic PPS-CF @base.json +++ b/resources/profiles/BBL/filament/Generic PPS-CF @base.json @@ -1,36 +1,36 @@ { - "type": "filament", - "name": "Generic PPS-CF @base", - "inherits": "fdm_filament_pps", - "from": "system", - "filament_id": "OF6rdQ6M", - "instantiation": "false", - "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", - "fan_max_speed": [ - "30" - ], - "filament_cost": [ - "240" - ], - "filament_density": [ - "1.26" - ], - "filament_max_volumetric_speed": [ - "3" - ], - "filament_type": [ - "PPS-CF" - ], - "impact_strength_z": [ - "5.7" - ], - "nozzle_temperature_range_low": [ - "310" - ], - "required_nozzle_HRC": [ - "40" - ], - "temperature_vitrification": [ - "220" - ] -} + "type": "filament", + "name": "Generic PPS-CF @base", + "inherits": "fdm_filament_pps", + "from": "system", + "filament_id": "OF6rdQ6M", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "240" + ], + "filament_density": [ + "1.26" + ], + "filament_max_volumetric_speed": [ + "3" + ], + "filament_type": [ + "PPS-CF" + ], + "impact_strength_z": [ + "5.7" + ], + "nozzle_temperature_range_low": [ + "310" + ], + "required_nozzle_HRC": [ + "40" + ], + "temperature_vitrification": [ + "220" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json index 080de810fe..6df4727ea0 100644 --- a/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @0.2 nozzle.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "Generic PVA @0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "0.5" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA @0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "0.5" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1 0.2 nozzle.json index 259c55f6c5..57fca27585 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PVA @BBL A1 0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA @BBL A1 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1.json index 7ebecdda54..5e02d05a2e 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic PVA @BBL A1", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA @BBL A1", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json index 7aac5b9503..d57e6fd726 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "Generic PVA @BBL A1M 0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA @BBL A1M 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json b/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json index ebed9d4282..fa3e915260 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "Generic PVA @BBL A1M", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA @BBL A1M", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL A2L 0.2 nozzle.json index 66a2cd7851..f0775269ed 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A2L 0.2 nozzle.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "Generic PVA @BBL A2L 0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_19", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "0.5" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "40" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.2 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PVA @BBL A2L 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_19", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "0.5" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "40" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.2 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL A2L.json b/resources/profiles/BBL/filament/Generic PVA @BBL A2L.json index 59cbcc89e4..c1d62b6e47 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL A2L.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "Generic PVA @BBL A2L", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_20", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic PVA @BBL A2L", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_20", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.2 nozzle.json index 914e544994..353ade784e 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.2 nozzle.json @@ -1,174 +1,81 @@ { - "type": "filament", - "name": "Generic PVA @BBL H2C 0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL H2C 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.4 nozzle.json index b8e2d6bb77..cb03660318 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2C 0.4 nozzle.json @@ -1,174 +1,91 @@ { - "type": "filament", - "name": "Generic PVA @BBL H2C 0.4 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_17", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL H2C 0.4 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_17", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2C.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2C.json index 3d4ad8d48f..fed6a86989 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2C.json @@ -1,175 +1,92 @@ { - "type": "filament", - "name": "Generic PVA @BBL H2C", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_18", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature_nc": [ - "180", - "180" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "1", - "1" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL H2C", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_18", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature_nc": [ + "180", + "180", + "180" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "1", + "1", + "1" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json index 3cce41a26a..ce5386eb2c 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2D.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Generic PVA @BBL H2D", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_06", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL H2D", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_06", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2DP.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2DP.json index ea0845834b..cac607510c 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Generic PVA @BBL H2DP", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_12", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL H2DP", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_12", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL H2S 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL H2S 0.4 nozzle.json index 8b3a377650..89d27ee442 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL H2S 0.4 nozzle.json @@ -1,133 +1,68 @@ { - "type": "filament", - "name": "Generic PVA @BBL H2S 0.4 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_21", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL H2S 0.4 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_21", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL P2S 0.2 nozzle.json index af1f76b082..82438b0930 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL P2S 0.2 nozzle.json @@ -1,171 +1,62 @@ { - "type": "filament", - "name": "Generic PVA @BBL P2S 0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL P2S 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL P2S.json b/resources/profiles/BBL/filament/Generic PVA @BBL P2S.json index cfda7a8aee..5fa57d0e6c 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL P2S.json @@ -1,173 +1,68 @@ { - "type": "filament", - "name": "Generic PVA @BBL P2S", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL P2S", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.2 nozzle.json index 2a197b4591..6421feeb00 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.2 nozzle.json @@ -1,272 +1,83 @@ { - "type": "filament", - "name": "Generic PVA @BBL X2D 0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_13", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3", - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5", - "0.5", - "0.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL X2D 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_13", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_flush_volumetric_speed": [ + "3", + "3", + "3", + "3" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5", + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.4 nozzle.json index 214e64453a..ec9ef88cbf 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL X2D 0.4 nozzle.json @@ -1,272 +1,93 @@ { - "type": "filament", - "name": "Generic PVA @BBL X2D 0.4 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_14", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL X2D 0.4 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_14", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @BBL X2D.json b/resources/profiles/BBL/filament/Generic PVA @BBL X2D.json index 3e624721ef..4dcf0b2b02 100644 --- a/resources/profiles/BBL/filament/Generic PVA @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic PVA @BBL X2D.json @@ -1,273 +1,94 @@ { - "type": "filament", - "name": "Generic PVA @BBL X2D", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_15", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20", - "20", - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_flow_ratio": [ - "0.95", - "0.95", - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16", - "16", - "16" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "220" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "220", - "220", - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220", - "220", - "220" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic PVA @BBL X2D", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16", + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_tower_interface_print_temp": [ + "220" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20", + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA @base.json b/resources/profiles/BBL/filament/Generic PVA @base.json index 4021f07f45..5acf0e1856 100644 --- a/resources/profiles/BBL/filament/Generic PVA @base.json +++ b/resources/profiles/BBL/filament/Generic PVA @base.json @@ -1,21 +1,21 @@ { - "type": "filament", - "name": "Generic PVA @base", - "inherits": "fdm_filament_pva", - "from": "system", - "filament_id": "OFDvXujf", - "instantiation": "false", - "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "slow_down_layer_time": [ - "7" - ], - "slow_down_min_speed": [ - "20" - ] -} + "type": "filament", + "name": "Generic PVA @base", + "inherits": "fdm_filament_pva", + "from": "system", + "filament_id": "OFDvXujf", + "instantiation": "false", + "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic PVA.json b/resources/profiles/BBL/filament/Generic PVA.json index 33fac4bccc..7db3aac32b 100644 --- a/resources/profiles/BBL/filament/Generic PVA.json +++ b/resources/profiles/BBL/filament/Generic PVA.json @@ -1,22 +1,22 @@ { - "type": "filament", - "name": "Generic PVA", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic SBS @base.json b/resources/profiles/BBL/filament/Generic SBS @base.json deleted file mode 100644 index fbf9b8a403..0000000000 --- a/resources/profiles/BBL/filament/Generic SBS @base.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "type": "filament", - "name": "Generic SBS @base", - "inherits": "fdm_filament_sbs", - "from": "system", - "filament_id": "OFhQfUQY", - "instantiation": "false", - "filament_flow_ratio": [ - "0.98" - ], - "slow_down_layer_time": [ - "4" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Generic SBS.json b/resources/profiles/BBL/filament/Generic SBS.json deleted file mode 100644 index ffa36a9abb..0000000000 --- a/resources/profiles/BBL/filament/Generic SBS.json +++ /dev/null @@ -1,26 +0,0 @@ -{ - "type": "filament", - "name": "Generic SBS", - "inherits": "Generic SBS @base", - "from": "system", - "setting_id": "BFLSBS99-1", - "filament_id": "OFhQfUQY", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL A1.json b/resources/profiles/BBL/filament/Generic TPU @BBL A1.json index 952f31983e..9fbe338a57 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL A1.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic TPU @BBL A1", - "inherits": "Generic TPU", - "from": "system", - "setting_id": "GFSU99_01", - "instantiation": "true", - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic TPU @BBL A1", + "inherits": "Generic TPU", + "from": "system", + "setting_id": "GFSU99_01", + "instantiation": "true", + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json b/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json index 15df2926d1..d5caa5640a 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL A1M.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic TPU @BBL A1M", - "inherits": "Generic TPU", - "from": "system", - "setting_id": "GFSU99_00", - "instantiation": "true", - "hot_plate_temp": [ - "30" - ], - "hot_plate_temp_initial_layer": [ - "30" - ], - "textured_plate_temp": [ - "30" - ], - "textured_plate_temp_initial_layer": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic TPU @BBL A1M", + "inherits": "Generic TPU", + "from": "system", + "setting_id": "GFSU99_00", + "instantiation": "true", + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL A2L.json b/resources/profiles/BBL/filament/Generic TPU @BBL A2L.json index 2942151d52..5b5848d0f9 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL A2L.json @@ -1,31 +1,31 @@ { - "type": "filament", - "name": "Generic TPU @BBL A2L", - "inherits": "Generic TPU", - "from": "system", - "setting_id": "GFSU99_10", - "instantiation": "true", - "hot_plate_temp": [ - "30" - ], - "hot_plate_temp_initial_layer": [ - "30" - ], - "pre_start_fan_time": [ - "2" - ], - "textured_plate_temp": [ - "30" - ], - "textured_plate_temp_initial_layer": [ - "30" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic TPU @BBL A2L", + "inherits": "Generic TPU", + "from": "system", + "setting_id": "GFSU99_10", + "instantiation": "true", + "hot_plate_temp": [ + "30" + ], + "hot_plate_temp_initial_layer": [ + "30" + ], + "pre_start_fan_time": [ + "2" + ], + "textured_plate_temp": [ + "30" + ], + "textured_plate_temp_initial_layer": [ + "30" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic TPU @BBL H2C 0.4 nozzle.json index a977e63e1a..9dda2e9f85 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL H2C 0.4 nozzle.json @@ -1,183 +1,125 @@ { - "type": "filament", - "name": "Generic TPU @BBL H2C 0.4 nozzle", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSU99_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2" - ], - "filament_ramming_volumetric_speed": [ - "0.8", - "0.8" - ], - "filament_ramming_volumetric_speed_nc": [ - "0.8", - "0.8" - ], - "filament_printable": [ - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "210", - "210" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL H2C 0.4 nozzle", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSU99_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2" + ], + "filament_ramming_volumetric_speed": [ + "0.8", + "0.8", + "0.8" + ], + "filament_ramming_volumetric_speed_nc": [ + "0.8", + "0.8", + "0.8" + ], + "filament_printable": [ + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "210", + "210", + "210" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL H2C.json b/resources/profiles/BBL/filament/Generic TPU @BBL H2C.json index d7ad1a41ab..063f446f6d 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL H2C.json @@ -1,184 +1,126 @@ { - "type": "filament", - "name": "Generic TPU @BBL H2C", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSU99_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2" - ], - "filament_ramming_volumetric_speed": [ - "0.8", - "0.8" - ], - "filament_ramming_volumetric_speed_nc": [ - "0.8", - "0.8" - ], - "filament_printable": [ - "2" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "210", - "210" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_retract_length_nc": [ - "10", - "10" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "pre_start_fan_time": [ - "2" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL H2C", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSU99_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2" + ], + "filament_ramming_volumetric_speed": [ + "0.8", + "0.8", + "0.8" + ], + "filament_ramming_volumetric_speed_nc": [ + "0.8", + "0.8", + "0.8" + ], + "filament_printable": [ + "2" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "210", + "210", + "210" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_retract_length_nc": [ + "10", + "10", + "10" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "pre_start_fan_time": [ + "2" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json b/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json index 12844a54e6..1d2e1a447d 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL H2D.json @@ -1,166 +1,286 @@ { - "type": "filament", - "name": "Generic TPU @BBL H2D", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSU99_02", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2", - "3.2" - ], - "filament_ramming_volumetric_speed": [ - "0.8", - "0.8", - "0.8" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "210", - "210", - "210" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL H2D", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSU99_02", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2", + "3.2" + ], + "filament_ramming_volumetric_speed": [ + "0.8", + "0.8", + "0.8", + "0.8" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_printable": [ + "2" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" + ], + "filament_pre_cooling_temperature": [ + "210", + "210", + "210", + "210" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_bridge_speed": [ + "25", + "25", + "25", + "25" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240" + ], + "override_process_overhang_speed": [ + "0", + "0", + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL H2DP.json b/resources/profiles/BBL/filament/Generic TPU @BBL H2DP.json index d5801a1b6a..456941431d 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL H2DP.json @@ -1,166 +1,244 @@ { - "type": "filament", - "name": "Generic TPU @BBL H2DP", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSU99_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2", - "3.2" - ], - "filament_ramming_volumetric_speed": [ - "0.8", - "0.8", - "0.8" - ], - "filament_printable": [ - "2" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive TPU High Flow" - ], - "filament_pre_cooling_temperature": [ - "210", - "210", - "210" - ], - "filament_ramming_travel_time": [ - "20", - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1" - ], - "nozzle_temperature": [ - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL H2DP", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSU99_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_bridge_speed": [ + "25", + "25", + "25" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive TPU High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "10" + ], + "filament_pre_cooling_temperature": [ + "210", + "210", + "210" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0" + ], + "filament_printable": [ + "2" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "0.8", + "0.8", + "0.8" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "override_process_overhang_speed": [ + "0", + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "10", + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL H2S.json b/resources/profiles/BBL/filament/Generic TPU @BBL H2S.json index 0743eec7b2..be7f778869 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL H2S.json @@ -1,139 +1,81 @@ { - "type": "filament", - "name": "Generic TPU @BBL H2S", - "inherits": "Generic TPU", - "from": "system", - "setting_id": "GFSU99_04", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL H2S", + "inherits": "Generic TPU", + "from": "system", + "setting_id": "GFSU99_04", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2" + ], + "filament_retraction_length": [ + "nil", + "0.4", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL P2S.json b/resources/profiles/BBL/filament/Generic TPU @BBL P2S.json index a977d6b8bc..44d4036ade 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL P2S.json @@ -1,173 +1,73 @@ { - "type": "filament", - "name": "Generic TPU @BBL P2S", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSU99_05", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL P2S", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSU99_05", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic TPU @BBL X2D 0.4 nozzle.json index c971cba747..79590069a8 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL X2D 0.4 nozzle.json @@ -1,275 +1,96 @@ { - "type": "filament", - "name": "Generic TPU @BBL X2D 0.4 nozzle", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSU99_03", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2", - "3.2", - "3.2" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL X2D 0.4 nozzle", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSU99_03", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2", + "3.2", + "3.2", + "3.2" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @BBL X2D.json b/resources/profiles/BBL/filament/Generic TPU @BBL X2D.json index af94c4486d..4b77f2207d 100644 --- a/resources/profiles/BBL/filament/Generic TPU @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic TPU @BBL X2D.json @@ -1,276 +1,97 @@ { - "type": "filament", - "name": "Generic TPU @BBL X2D", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSU99_07", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "3.2", - "3.2", - "3.2", - "3.2" - ], - "filament_printable": [ - "1" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "240" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "240", - "240", - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240", - "240", - "240" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic TPU @BBL X2D", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSU99_07", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "3.2", + "3.2", + "3.2", + "3.2", + "3.2", + "3.2" + ], + "filament_printable": [ + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "filament_tower_interface_print_temp": [ + "240" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240", + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU @base.json b/resources/profiles/BBL/filament/Generic TPU @base.json index f2bc7049aa..86ed3103b3 100644 --- a/resources/profiles/BBL/filament/Generic TPU @base.json +++ b/resources/profiles/BBL/filament/Generic TPU @base.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "Generic TPU @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFgbpcy9", - "instantiation": "false", - "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_max_volumetric_speed": [ - "3.2" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic TPU @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFgbpcy9", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_max_volumetric_speed": [ + "3.2" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json index 30326518b1..b73d35817b 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL A1", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL A1", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json index 298a55fe21..bcb504c038 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A1M.json @@ -1,28 +1,28 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL A1M", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL A1M", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A2L.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A2L.json index 7c76a301d8..93a62334f4 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A2L.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL A2L.json @@ -1,34 +1,34 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL A2L", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_12", - "instantiation": "true", - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab A2L 0.4 nozzle", - "Bambu Lab A2L 0.6 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ], - "filament_start_gcode": [ - "" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL A2L", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_12", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab A2L 0.4 nozzle", + "Bambu Lab A2L 0.6 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "filament_start_gcode": [ + "" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json index b2ba07c308..7232187281 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C 0.4 nozzle.json @@ -1,195 +1,127 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL H2C 0.4 nozzle", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_10", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "2.63", - "2.63" - ], - "filament_ramming_volumetric_speed_nc": [ - "2.63", - "2.63" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL H2C 0.4 nozzle", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_10", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_volumetric_speed": [ + "2.63", + "2.63", + "2.63" + ], + "filament_ramming_volumetric_speed_nc": [ + "2.63", + "2.63", + "2.63" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C.json index b60988cad2..4980e672f8 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2C.json @@ -1,196 +1,128 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL H2C", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "2.63", - "2.63" - ], - "filament_ramming_volumetric_speed_nc": [ - "2.63", - "2.63" - ], - "filament_prime_volume": [ - "30" - ], - "filament_prime_volume_nc": [ - "30" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_pre_cooling_temperature_nc": [ - "190", - "190" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_ramming_travel_time_nc": [ - "20", - "20" - ], - "filament_change_length": [ - "4" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_change_length_nc": [ - "4" - ], - "filament_preheat_temperature_delta": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_retract_length_nc": [ - "14", - "14" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "pre_start_fan_time": [ - "2" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL H2C", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_volumetric_speed": [ + "2.63", + "2.63", + "2.63" + ], + "filament_ramming_volumetric_speed_nc": [ + "2.63", + "2.63", + "2.63" + ], + "filament_prime_volume": [ + "30" + ], + "filament_prime_volume_nc": [ + "30" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_pre_cooling_temperature_nc": [ + "190", + "190", + "190" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "filament_ramming_travel_time_nc": [ + "20", + "20", + "20" + ], + "filament_change_length": [ + "4" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_change_length_nc": [ + "4" + ], + "filament_preheat_temperature_delta": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "pre_start_fan_time": [ + "2" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab H2C 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json index f9e72de062..37f4f2ffa4 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2D.json @@ -1,151 +1,86 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL H2D", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_04", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "2.625", - "2.625" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL H2D", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_04", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_volumetric_speed": [ + "2.625", + "2.625", + "2.625" + ], + "filament_pre_cooling_temperature": [ + "200", + "200", + "200" + ], + "filament_ramming_travel_time": [ + "20", + "20", + "20" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2DP.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2DP.json index 287c6c798d..42f65f4680 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2DP.json @@ -1,151 +1,78 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL H2DP", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_08", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "2.625", - "2.625" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "200", - "200" - ], - "filament_ramming_travel_time": [ - "20", - "20" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL H2DP", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_08", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5" + ], + "filament_pre_cooling_temperature": [ + "200", + "200" + ], + "filament_ramming_travel_time": [ + "20", + "20" + ], + "filament_ramming_volumetric_speed": [ + "2.625", + "2.625" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2S.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2S.json index 00326a990e..7931394b1f 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2S.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL H2S.json @@ -1,154 +1,101 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL H2S", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "100" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "0" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL H2S", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "100" + ], + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "nil", + "0", + "nil" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json index f1c09c8b09..437aadfa54 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P1P.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL P1P", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL P1P", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P2S.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P2S.json index d4f073c08c..24c8b552fb 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P2S.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL P2S.json @@ -1,188 +1,88 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL P2S", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_07", - "instantiation": "true", - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_enable_overhang_speed": [ - "1", - "1" - ], - "filament_overhang_1_4_speed": [ - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "override_process_overhang_speed": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL P2S", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_07", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab P2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json index 305bdcad8b..85b053a0cd 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X1C.json @@ -1,142 +1,69 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL X1C", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5" - ], - "filament_retraction_length": [ - "0.8", - "0.8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL X1C", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5" + ], + "filament_retraction_length": [ + "0.8", + "0.8" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json index 065efc188c..446cb91fbb 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D 0.4 nozzle.json @@ -1,287 +1,108 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL X2D 0.4 nozzle", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_05", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8", - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5", - "10.5", - "10.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL X2D 0.4 nozzle", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_05", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5", + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D.json b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D.json index b345595ccd..3223336a76 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @BBL X2D.json @@ -1,288 +1,109 @@ { - "type": "filament", - "name": "Generic TPU for AMS @BBL X2D", - "inherits": "Generic TPU for AMS @base", - "from": "system", - "setting_id": "GFSU98_09", - "instantiation": "true", - "filament_adaptive_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10", - "10", - "10" - ], - "filament_deretraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_enable_overhang_speed": [ - "1", - "1", - "1", - "1" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "filament_flush_temp": [ - "0", - "0", - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_overhang_1_4_speed": [ - "0", - "0", - "0", - "0" - ], - "filament_overhang_2_4_speed": [ - "50", - "50", - "50", - "50" - ], - "filament_overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "filament_overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_overhang_totally_speed": [ - "10", - "10", - "10", - "10" - ], - "filament_bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "filament_pre_cooling_temperature": [ - "0", - "0", - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0", - "0", - "0" - ], - "filament_retract_length_nc": [ - "14", - "14", - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1", - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_length": [ - "0.8", - "0.8", - "0.8", - "0.8" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil", - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil", - "nil", - "nil" - ], - "long_retractions_when_ec": [ - "1", - "1", - "1", - "1" - ], - "override_process_overhang_speed": [ - "0", - "0", - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0", - "0", - "0" - ], - "slow_down_min_speed": [ - "10", - "10", - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "eng_plate_temp": [ - "35" - ], - "eng_plate_temp_initial_layer": [ - "35" - ], - "fan_cooling_layer_time": [ - "40" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "10" - ], - "filament_flow_ratio": [ - "1", - "1", - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "10.5", - "10.5", - "10.5", - "10.5" - ], - "filament_ramming_travel_time": [ - "0", - "0", - "0", - "0" - ], - "filament_tower_interface_print_temp": [ - "230" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "nozzle_temperature": [ - "230", - "230", - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230", - "230", - "230" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "10" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.6 nozzle", - "Bambu Lab X2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @BBL X2D", + "inherits": "Generic TPU for AMS @base", + "from": "system", + "setting_id": "GFSU98_09", + "instantiation": "true", + "eng_plate_temp": [ + "35" + ], + "eng_plate_temp_initial_layer": [ + "35" + ], + "fan_cooling_layer_time": [ + "40" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "10" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10.5", + "10.5", + "10.5", + "10.5", + "10.5", + "10.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8" + ], + "filament_tower_interface_print_temp": [ + "230" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "include": [ + "fdm_filament_template_direct_bowden_e3d" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "overhang_fan_threshold": [ + "25%" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab X2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU for AMS @base.json b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json index 1432bdfbe2..307eef847b 100644 --- a/resources/profiles/BBL/filament/Generic TPU for AMS @base.json +++ b/resources/profiles/BBL/filament/Generic TPU for AMS @base.json @@ -1,30 +1,30 @@ { - "type": "filament", - "name": "Generic TPU for AMS @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFmN2lvw", - "instantiation": "false", - "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", - "filament_cost": [ - "41.99" - ], - "filament_density": [ - "1.26" - ], - "filament_max_volumetric_speed": [ - "10.5" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_type": [ - "TPU-AMS" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ] -} + "type": "filament", + "name": "Generic TPU for AMS @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFmN2lvw", + "instantiation": "false", + "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.26" + ], + "filament_max_volumetric_speed": [ + "10.5" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_type": [ + "TPU-AMS" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Generic TPU.json b/resources/profiles/BBL/filament/Generic TPU.json index ee3426050e..0b2303da69 100644 --- a/resources/profiles/BBL/filament/Generic TPU.json +++ b/resources/profiles/BBL/filament/Generic TPU.json @@ -1,22 +1,22 @@ { - "type": "filament", - "name": "Generic TPU", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSR99", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic TPU", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSR99", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..a5f3c4665c --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL A1 0.2 nozzle", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1.json new file mode 100644 index 0000000000..5e362df470 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL A1", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..eaba775ddf --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL A1M 0.2 nozzle", + "inherits": "Overture Matte PLA @BBL A1M", + "from": "system", + "setting_id": "GFSL05_06", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json new file mode 100644 index 0000000000..e76b7f24ce --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL A1M", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.8 nozzle", + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json index b8ce4d201d..d4ce9d9f7c 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Overture Matte PLA @BBL H2D 0.2 nozzle", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture Matte PLA @BBL H2D 0.2 nozzle", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json index 8e5b357da3..edeb9786f9 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2D.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Overture Matte PLA @BBL H2D", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture Matte PLA @BBL H2D", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json index e59bcd145e..3dbd87ec38 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Overture Matte PLA @BBL H2DP 0.2 nozzle", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture Matte PLA @BBL H2DP 0.2 nozzle", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP.json index 985133f24f..a7bc9fd687 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Overture Matte PLA @BBL H2DP", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture Matte PLA @BBL H2DP", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S 0.2 nozzle.json index 8b9a9dade4..5c258fbd47 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S 0.2 nozzle.json @@ -1,134 +1,73 @@ { - "type": "filament", - "name": "Overture Matte PLA @BBL H2S 0.2 nozzle", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture Matte PLA @BBL H2S 0.2 nozzle", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S.json index 67736819f6..eb84bfac73 100644 --- a/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S.json +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL H2S.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "Overture Matte PLA @BBL H2S", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture Matte PLA @BBL H2S", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..66c7f1c3e1 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P 0.2 nozzle.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL P1P 0.2 nozzle", + "inherits": "Overture Matte PLA @BBL P1P", + "from": "system", + "setting_id": "GFSL05_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json new file mode 100644 index 0000000000..b6747d4d27 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL P1P.json @@ -0,0 +1,69 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL P1P", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json new file mode 100644 index 0000000000..7f5a9e2cc2 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL X1", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..9d3ea20395 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL X1C 0.2 nozzle", + "inherits": "Overture Matte PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL05_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "compatible_printers": [ + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json new file mode 100644 index 0000000000..6810da28c4 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @BBL X1C.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @BBL X1C", + "inherits": "Overture Matte PLA @base", + "from": "system", + "setting_id": "GFSL05_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture Matte PLA @base.json b/resources/profiles/BBL/filament/Overture Matte PLA @base.json new file mode 100644 index 0000000000..6573c1b46b --- /dev/null +++ b/resources/profiles/BBL/filament/Overture Matte PLA @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Overture Matte PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFBw6eEG", + "instantiation": "false", + "filament_cost": [ + "24.52" + ], + "filament_density": [ + "1.22" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "Overture" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..de9052fdb2 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1 0.2 nozzle.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL A1 0.2 nozzle", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1.json new file mode 100644 index 0000000000..bffa20d601 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1.json @@ -0,0 +1,25 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL A1", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..0c5657ceb5 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL A1M 0.2 nozzle", + "inherits": "Overture PLA @BBL A1M", + "from": "system", + "setting_id": "GFSL04_06", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.6" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json new file mode 100644 index 0000000000..a542675287 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL A1M", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json index 050fc3441e..e117800ca8 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2D 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Overture PLA @BBL H2D 0.2 nozzle", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture PLA @BBL H2D 0.2 nozzle", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json index 4c4a698cae..d236aeb1be 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2D.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Overture PLA @BBL H2D", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_09", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture PLA @BBL H2D", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_09", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2DP 0.2 nozzle.json index 61a22824f6..36c80d8888 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Overture PLA @BBL H2DP 0.2 nozzle", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture PLA @BBL H2DP 0.2 nozzle", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2DP.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2DP.json index 83ef11a9ea..7d5dd1217c 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Overture PLA @BBL H2DP", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture PLA @BBL H2DP", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2S 0.2 nozzle.json index 7f75638a27..015bd25840 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2S 0.2 nozzle.json @@ -1,134 +1,73 @@ { - "type": "filament", - "name": "Overture PLA @BBL H2S 0.2 nozzle", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture PLA @BBL H2S 0.2 nozzle", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL H2S.json b/resources/profiles/BBL/filament/Overture PLA @BBL H2S.json index 00ac02bffe..e66b7c9405 100644 --- a/resources/profiles/BBL/filament/Overture PLA @BBL H2S.json +++ b/resources/profiles/BBL/filament/Overture PLA @BBL H2S.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "Overture PLA @BBL H2S", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_11", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "Overture PLA @BBL H2S", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_11", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..714d4a117d --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL P1P 0.2 nozzle.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL P1P 0.2 nozzle", + "inherits": "Overture PLA @BBL P1P", + "from": "system", + "setting_id": "GFSL04_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL P1P.json b/resources/profiles/BBL/filament/Overture PLA @BBL P1P.json new file mode 100644 index 0000000000..c8ad574304 --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL P1P.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL P1P", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1.json new file mode 100644 index 0000000000..df1cab9b9c --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL X1", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..bdbef090ff --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL X1C 0.2 nozzle", + "inherits": "Overture PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL04_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json new file mode 100644 index 0000000000..9962d88ced --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @BBL X1C.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "name": "Overture PLA @BBL X1C", + "inherits": "Overture PLA @base", + "from": "system", + "setting_id": "GFSL04_05", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture PLA @base.json b/resources/profiles/BBL/filament/Overture PLA @base.json new file mode 100644 index 0000000000..d13d2d99de --- /dev/null +++ b/resources/profiles/BBL/filament/Overture PLA @base.json @@ -0,0 +1,26 @@ +{ + "type": "filament", + "name": "Overture PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFc3xdm9", + "instantiation": "false", + "filament_cost": [ + "24.15" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Overture" + ], + "slow_down_layer_time": [ + "6" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1 0.2 nozzle.json deleted file mode 100644 index 9564767b5d..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,38 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL A1 0.2 nozzle", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1.json deleted file mode 100644 index 00991ccd6e..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1.json +++ /dev/null @@ -1,37 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL A1", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1M 0.2 nozzle.json deleted file mode 100644 index 57370c05ef..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1M 0.2 nozzle.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL A1M 0.2 nozzle", - "inherits": "Overture Matte PLA @BBL A1M", - "from": "system", - "setting_id": "GFSL05_06", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.8" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1M.json deleted file mode 100644 index db25771d09..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL A1M.json +++ /dev/null @@ -1,37 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL A1M", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.8 nozzle", - "Bambu Lab A1 mini 0.6 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL P1P 0.2 nozzle.json deleted file mode 100644 index c6c93ea0d0..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL P1P 0.2 nozzle.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL P1P 0.2 nozzle", - "inherits": "Overture Matte PLA @BBL P1P", - "from": "system", - "setting_id": "GFSL05_04", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL P1P.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL P1P.json deleted file mode 100644 index c73cee4cb1..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL P1P.json +++ /dev/null @@ -1,142 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL P1P", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1.json deleted file mode 100644 index 25b17be464..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1.json +++ /dev/null @@ -1,127 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL X1", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1C 0.2 nozzle.json deleted file mode 100644 index aee193a929..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL X1C 0.2 nozzle", - "inherits": "Overture Matte PLA @BBL X1C", - "from": "system", - "setting_id": "GFSL05_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "compatible_printers": [ - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1C.json deleted file mode 100644 index b76e80596d..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @BBL X1C.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @BBL X1C", - "inherits": "Overture Matte PLA @base", - "from": "system", - "setting_id": "GFSL05_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @base.json b/resources/profiles/BBL/filament/Overture/Overture Matte PLA @base.json deleted file mode 100644 index bccfb1f17b..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture Matte PLA @base.json +++ /dev/null @@ -1,26 +0,0 @@ -{ - "type": "filament", - "name": "Overture Matte PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFBw6eEG", - "instantiation": "false", - "filament_cost": [ - "24.52" - ], - "filament_density": [ - "1.22" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Overture" - ], - "slow_down_layer_time": [ - "6" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1 0.2 nozzle.json deleted file mode 100644 index cc2a9ccae2..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,26 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL A1 0.2 nozzle", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1.json deleted file mode 100644 index febe198ebd..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1.json +++ /dev/null @@ -1,25 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL A1", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1M 0.2 nozzle.json deleted file mode 100644 index 8c2ad1cb8a..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1M 0.2 nozzle.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL A1M 0.2 nozzle", - "inherits": "Overture PLA @BBL A1M", - "from": "system", - "setting_id": "GFSL04_06", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.6" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1M.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1M.json deleted file mode 100644 index f3a70fa2d9..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL A1M.json +++ /dev/null @@ -1,37 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL A1M", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_00", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL P1P 0.2 nozzle.json deleted file mode 100644 index f0c7984d95..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL P1P 0.2 nozzle.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL P1P 0.2 nozzle", - "inherits": "Overture PLA @BBL P1P", - "from": "system", - "setting_id": "GFSL04_04", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL P1P.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL P1P.json deleted file mode 100644 index e6800d6d83..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL P1P.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL P1P", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1.json deleted file mode 100644 index 642af0098e..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1.json +++ /dev/null @@ -1,127 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL X1", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1C 0.2 nozzle.json deleted file mode 100644 index 6a2dc62ebb..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL X1C 0.2 nozzle", - "inherits": "Overture PLA @BBL X1C", - "from": "system", - "setting_id": "GFSL04_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1C.json b/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1C.json deleted file mode 100644 index d959fa28a8..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @BBL X1C.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @BBL X1C", - "inherits": "Overture PLA @base", - "from": "system", - "setting_id": "GFSL04_05", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA @base.json b/resources/profiles/BBL/filament/Overture/Overture PLA @base.json deleted file mode 100644 index 0f302d4798..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA @base.json +++ /dev/null @@ -1,26 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFc3xdm9", - "instantiation": "false", - "filament_cost": [ - "24.15" - ], - "filament_density": [ - "1.2" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_vendor": [ - "Overture" - ], - "slow_down_layer_time": [ - "6" - ] -} diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @base.json b/resources/profiles/BBL/filament/Overture/Overture PLA Pro @base.json deleted file mode 100644 index 454c36e7b0..0000000000 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Overture PLA Pro @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFxA1p01", - "instantiation": "false", - "filament_cost": [ - "26.99" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Overture" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "64" - ] -} diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json index 13fcb80eea..dcbd382ffe 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.2 nozzle.json @@ -1,140 +1,71 @@ { - "type": "filament", - "name": "Bambu ABS @BBL P1P 0.2 nozzle", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_02", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL P1P 0.2 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_02", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..ea6060ba15 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P 0.6 nozzle.json @@ -0,0 +1,87 @@ +{ + "type": "filament", + "name": "Bambu ABS @BBL P1P 0.6 nozzle", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_41", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "16", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json index df46984e46..c21004ca75 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu ABS @BBL P1P.json @@ -1,142 +1,88 @@ { - "type": "filament", - "name": "Bambu ABS @BBL P1P", - "inherits": "Bambu ABS @base", - "from": "system", - "setting_id": "GFSB00_03", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu ABS @BBL P1P", + "inherits": "Bambu ABS @base", + "from": "system", + "setting_id": "GFSB00_03", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "16", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json index e8127557c0..b7cfc61878 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PA-CF @BBL P1P.json @@ -1,133 +1,63 @@ { - "type": "filament", - "name": "Bambu PA-CF @BBL P1P", - "inherits": "Bambu PA-CF @base", - "from": "system", - "setting_id": "GFSN00_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "full_fan_speed_layer": [ - "2" - ], - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PA-CF @BBL P1P", + "inherits": "Bambu PA-CF @base", + "from": "system", + "setting_id": "GFSN00_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..adbae88001 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P 0.6 nozzle.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "name": "Bambu PAHT-CF @BBL P1P 0.6 nozzle", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_15", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "12" + ], + "filament_retraction_length": [ + "nil", + "1.2" + ], + "filament_z_hop": [ + "nil", + "0.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json index 3c423b8d54..9a4db4fe67 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PAHT-CF @BBL P1P.json @@ -1,121 +1,50 @@ { - "type": "filament", - "name": "Bambu PAHT-CF @BBL P1P", - "inherits": "Bambu PAHT-CF @base", - "from": "system", - "setting_id": "GFSN04_10", - "instantiation": "true", - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PAHT-CF @BBL P1P", + "inherits": "Bambu PAHT-CF @base", + "from": "system", + "setting_id": "GFSN04_10", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "12" + ], + "filament_z_hop": [ + "nil", + "0.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json index e5ce46da8d..d64fff5af9 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.2 nozzle.json @@ -1,146 +1,73 @@ { - "type": "filament", - "name": "Bambu PC @BBL P1P 0.2 nozzle", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_03", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL P1P 0.2 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_03", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..bc23bb1607 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P 0.6 nozzle.json @@ -0,0 +1,85 @@ +{ + "type": "filament", + "name": "Bambu PC @BBL P1P 0.6 nozzle", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_42", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94", + "0.945" + ], + "filament_max_volumetric_speed": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.45" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json index 44c437f34e..0977c4fbb8 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PC @BBL P1P.json @@ -1,148 +1,74 @@ { - "type": "filament", - "name": "Bambu PC @BBL P1P", - "inherits": "Bambu PC @base", - "from": "system", - "setting_id": "GFSC00_04", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PC @BBL P1P", + "inherits": "Bambu PC @base", + "from": "system", + "setting_id": "GFSC00_04", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "18", + "29" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json index 98651c4f20..5095859d67 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PET-CF @BBL P1P.json @@ -1,127 +1,78 @@ { - "type": "filament", - "name": "Bambu PET-CF @BBL P1P", - "inherits": "Bambu PET-CF @base", - "from": "system", - "setting_id": "GFST01_10", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PET-CF @BBL P1P", + "inherits": "Bambu PET-CF @base", + "from": "system", + "setting_id": "GFST01_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "1" + ], + "filament_flow_ratio": [ + "0.9555", + "1" + ], + "filament_max_volumetric_speed": [ + "5", + "8" + ], + "filament_overhang_2_4_speed": [ + "35", + "50" + ], + "filament_overhang_3_4_speed": [ + "35", + "30" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "overhang_fan_speed": [ + "75" + ], + "override_process_overhang_speed": [ + "1", + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "1" + ], + "slow_down_min_speed": [ + "35", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json index dbbae54b48..6f21d17509 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P 0.4 nozzle.json @@ -1,131 +1,66 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL P1P 0.4 nozzle", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "11.5", + "20" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_wipe": [ + "nil", + "1" + ], + "filament_wipe_distance": [ + "nil", + "2" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "275" + ], + "nozzle_temperature_initial_layer": [ + "255", + "275" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json index fd55dccbc0..bf140d0d31 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PETG-CF @BBL P1P.json @@ -1,132 +1,67 @@ { - "type": "filament", - "name": "Bambu PETG-CF @BBL P1P", - "inherits": "Bambu PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PETG-CF @BBL P1P", + "inherits": "Bambu PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "11.5", + "20" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.4" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json index b6281095ec..01eb23cd11 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Aero @BBL P1P.json @@ -1,142 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Aero @BBL P1P", - "inherits": "Bambu PLA Aero @base", - "from": "system", - "setting_id": "GFSA11_02", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "0" - ], - "fan_cooling_layer_time": [ - "80" - ], - "filament_flow_ratio": [ - "0.6", - "0.6" - ], - "filament_max_volumetric_speed": [ - "6", - "6" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Aero @BBL P1P", + "inherits": "Bambu PLA Aero @base", + "from": "system", + "setting_id": "GFSA11_02", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "0" + ], + "fan_cooling_layer_time": [ + "80" + ], + "filament_flow_ratio": [ + "0.6", + "0.6" + ], + "filament_max_volumetric_speed": [ + "6", + "6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json index 85ca50ccee..db4088ef94 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA00_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA00_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..f30ef29c1f --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P 0.6 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu PLA Basic @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA04_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json index 27d856a5d6..eb897cf359 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Basic @BBL P1P.json @@ -1,142 +1,92 @@ { - "type": "filament", - "name": "Bambu PLA Basic @BBL P1P", - "inherits": "Bambu PLA Basic @base", - "from": "system", - "setting_id": "GFSA04_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Basic @BBL P1P", + "inherits": "Bambu PLA Basic @base", + "from": "system", + "setting_id": "GFSA04_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..2cbd700b75 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P 0.6 nozzle.json @@ -0,0 +1,92 @@ +{ + "type": "filament", + "name": "Bambu PLA Marble @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_18", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json index 4414187013..1cc0306b4b 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Marble @BBL P1P.json @@ -1,142 +1,91 @@ { - "type": "filament", - "name": "Bambu PLA Marble @BBL P1P", - "inherits": "Bambu PLA Marble @base", - "from": "system", - "setting_id": "GFSA07_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Marble @BBL P1P", + "inherits": "Bambu PLA Marble @base", + "from": "system", + "setting_id": "GFSA07_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json index 60b520ea6d..6dbead6f4d 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA01_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA01_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..6107e5ba72 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P 0.6 nozzle.json @@ -0,0 +1,91 @@ +{ + "type": "filament", + "name": "Bambu PLA Matte @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA05_28", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json index 84748f2fdc..a70c160320 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Matte @BBL P1P.json @@ -1,142 +1,92 @@ { - "type": "filament", - "name": "Bambu PLA Matte @BBL P1P", - "inherits": "Bambu PLA Matte @base", - "from": "system", - "setting_id": "GFSA05_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Matte @BBL P1P", + "inherits": "Bambu PLA Matte @base", + "from": "system", + "setting_id": "GFSA05_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "29" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json index 48102aeb7a..c33ce2a479 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..f0fd865b66 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P 0.6 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PLA Metal @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_29", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json index b2b57bda5e..9c600caafe 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Metal @BBL P1P.json @@ -1,142 +1,84 @@ { - "type": "filament", - "name": "Bambu PLA Metal @BBL P1P", - "inherits": "Bambu PLA Metal @base", - "from": "system", - "setting_id": "GFSA02_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Metal @BBL P1P", + "inherits": "Bambu PLA Metal @base", + "from": "system", + "setting_id": "GFSA02_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "40" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "29" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "40" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json index 3300e3480b..f778eb9e23 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P 0.2 nozzle.json @@ -1,131 +1,58 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_11", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_11", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json index 6bd13b0ee2..972c6ca156 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Silk @BBL P1P.json @@ -1,136 +1,63 @@ { - "type": "filament", - "name": "Bambu PLA Silk @BBL P1P", - "inherits": "Bambu PLA Silk @base", - "from": "system", - "setting_id": "GFSA05_12", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Silk @BBL P1P", + "inherits": "Bambu PLA Silk @base", + "from": "system", + "setting_id": "GFSA05_12", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..eaa8896497 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P 0.6 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PLA Sparkle @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_19", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json index 7e6286af3b..240da6d165 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Sparkle @BBL P1P.json @@ -1,142 +1,84 @@ { - "type": "filament", - "name": "Bambu PLA Sparkle @BBL P1P", - "inherits": "Bambu PLA Sparkle @base", - "from": "system", - "setting_id": "GFSA08_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Sparkle @BBL P1P", + "inherits": "Bambu PLA Sparkle @base", + "from": "system", + "setting_id": "GFSA08_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "nil", + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_max_volumetric_speed": [ + "12", + "25" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_retraction_speed": [ + "nil", + "50" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json index 020f025a80..f99ea5200f 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json index d065df80ee..8a1a0fd274 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough @BBL P1P.json @@ -1,142 +1,69 @@ { - "type": "filament", - "name": "Bambu PLA Tough @BBL P1P", - "inherits": "Bambu PLA Tough @base", - "from": "system", - "setting_id": "GFSA09_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough @BBL P1P", + "inherits": "Bambu PLA Tough @base", + "from": "system", + "setting_id": "GFSA09_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json index b18ea4a73d..1a0c12f0ff 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.2 nozzle.json @@ -1,143 +1,78 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL P1P 0.2 nozzle", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_33", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL P1P 0.2 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_33", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.6 nozzle.json new file mode 100644 index 0000000000..c090797121 --- /dev/null +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P 0.6 nozzle.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough+ @BBL P1P 0.6 nozzle", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_38", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P.json index 3e4274de9c..b4e25f845b 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA Tough+ @BBL P1P.json @@ -1,142 +1,84 @@ { - "type": "filament", - "name": "Bambu PLA Tough+ @BBL P1P", - "inherits": "Bambu PLA Tough+ @base", - "from": "system", - "setting_id": "GFSA10_34", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "70" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "90" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA Tough+ @BBL P1P", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "GFSA10_34", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "70" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "90" + ], + "filament_flow_ratio": [ + "0.98", + "0.985" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "nil", + "0.4" + ], + "filament_z_hop": [ + "nil", + "0.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json index 8f168030d3..dcf38827ce 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P 0.8 nozzle.json @@ -1,138 +1,85 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "18", - "18" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL P1P 0.8 nozzle", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "nil" + ], + "filament_max_volumetric_speed": [ + "18", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "nil" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.4" + ], + "filament_z_hop_types": [ + "nil", + "Spiral Lift" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json index 52a180dbaf..82a84b4d1f 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu PLA-CF @BBL P1P.json @@ -1,137 +1,80 @@ { - "type": "filament", - "name": "Bambu PLA-CF @BBL P1P", - "inherits": "Bambu PLA-CF @base", - "from": "system", - "setting_id": "GFSA50_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle" - ] -} + "type": "filament", + "name": "Bambu PLA-CF @BBL P1P", + "inherits": "Bambu PLA-CF @base", + "from": "system", + "setting_id": "GFSA50_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.975" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "15", + "25" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "nil", + "0.8" + ], + "filament_z_hop": [ + "nil", + "0.4" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json index a5f0eb6e5f..e97c505bd5 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PA PET @BBL P1P.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu Support For PA/PET @BBL P1P", - "inherits": "Bambu Support For PA/PET @base", - "from": "system", - "setting_id": "GFSS03_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PA/PET @BBL P1P", + "inherits": "Bambu Support For PA/PET @base", + "from": "system", + "setting_id": "GFSS03_01", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json index 040e452f68..0a789a6941 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL P1P 0.2 nozzle", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL P1P 0.2 nozzle", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json index daa5499c31..3bbd78f489 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support For PLA @BBL P1P.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Bambu Support For PLA @BBL P1P", - "inherits": "Bambu Support For PLA @base", - "from": "system", - "setting_id": "GFSS02_12", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support For PLA @BBL P1P", + "inherits": "Bambu Support For PLA @base", + "from": "system", + "setting_id": "GFSS02_12", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json index f663ce25da..1c773ec4e4 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support G @BBL P1P.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Bambu Support G @BBL P1P", - "inherits": "Bambu Support G @base", - "from": "system", - "setting_id": "GFSS01_10", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support G @BBL P1P", + "inherits": "Bambu Support G @base", + "from": "system", + "setting_id": "GFSS01_10", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json index 57a3e44664..43c99264b1 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "Bambu Support W @BBL P1P 0.2 nozzle", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS00_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL P1P 0.2 nozzle", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS00_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json index 55e14c5edf..ca08dc8ce3 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu Support W @BBL P1P.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Bambu Support W @BBL P1P", - "inherits": "Bambu Support W @base", - "from": "system", - "setting_id": "GFSS02_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu Support W @BBL P1P", + "inherits": "Bambu Support W @base", + "from": "system", + "setting_id": "GFSS02_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json index 5550b07407..1cceb72d76 100644 --- a/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Bambu TPU 95A @BBL P1P.json @@ -1,133 +1,60 @@ { - "type": "filament", - "name": "Bambu TPU 95A @BBL P1P", - "inherits": "Bambu TPU 95A @base", - "from": "system", - "setting_id": "GFSU01_10", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "3.6", - "3.6" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Bambu TPU 95A @BBL P1P", + "inherits": "Bambu TPU 95A @base", + "from": "system", + "setting_id": "GFSU01_10", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.6", + "3.6" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json index 270932c7c6..a11c8b406c 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P 0.2 nozzle.json @@ -1,137 +1,60 @@ { - "type": "filament", - "name": "Generic ABS @BBL P1P 0.2 nozzle", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_02", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS @BBL P1P 0.2 nozzle", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_02", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json index b85c45d353..77f537261e 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic ABS @BBL P1P.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Generic ABS @BBL P1P", - "inherits": "Generic ABS @base", - "from": "system", - "setting_id": "GFSB99_01", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ABS @BBL P1P", + "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "GFSB99_01", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_retraction_length": [ + "0.4", + "nil" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json index b8a91fa88c..73cde11821 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P 0.2 nozzle.json @@ -1,119 +1,42 @@ { - "type": "filament", - "name": "Generic ASA @BBL P1P 0.2 nozzle", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_11", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA @BBL P1P 0.2 nozzle", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_11", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json index fc8d40a3c3..3ea5875d10 100644 --- a/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic ASA @BBL P1P.json @@ -1,121 +1,44 @@ { - "type": "filament", - "name": "Generic ASA @BBL P1P", - "inherits": "Generic ASA @base", - "from": "system", - "setting_id": "GFSB98_10", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic ASA @BBL P1P", + "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "GFSB98_10", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json index 980f88f9df..250c9e8e49 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA @BBL P1P.json @@ -1,124 +1,47 @@ { - "type": "filament", - "name": "Generic PA @BBL P1P", - "inherits": "Generic PA @base", - "from": "system", - "setting_id": "GFSN98_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "60" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PA @BBL P1P", + "inherits": "Generic PA @base", + "from": "system", + "setting_id": "GFSN98_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "60" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json index f76f7cebf5..b43a11f978 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PA-CF @BBL P1P.json @@ -1,121 +1,48 @@ { - "type": "filament", - "name": "Generic PA-CF @BBL P1P", - "inherits": "Generic PA-CF @base", - "from": "system", - "setting_id": "GFSN99_10", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PA-CF @BBL P1P", + "inherits": "Generic PA-CF @base", + "from": "system", + "setting_id": "GFSN99_10", + "instantiation": "true", + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json index 149cbf751b..75837ececb 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P 0.2 nozzle.json @@ -1,143 +1,70 @@ { - "type": "filament", - "name": "Generic PC @BBL P1P 0.2 nozzle", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_01", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL P1P 0.2 nozzle", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_01", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json index 704b90375d..08086f47f6 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PC @BBL P1P.json @@ -1,145 +1,72 @@ { - "type": "filament", - "name": "Generic PC @BBL P1P", - "inherits": "Generic PC @base", - "from": "system", - "setting_id": "GFSC99_02", - "instantiation": "true", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_max_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.94", - "0.94" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "280", - "280" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PC @BBL P1P", + "inherits": "Generic PC @base", + "from": "system", + "setting_id": "GFSC99_02", + "instantiation": "true", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_max_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94", + "0.94" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json index 7e10f704d4..92ade7e51a 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Generic PETG @BBL P1P 0.2 nozzle", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_11", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG @BBL P1P 0.2 nozzle", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_11", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json index 01998b0bd0..ecca6c0709 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG @BBL P1P.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Generic PETG @BBL P1P", - "inherits": "Generic PETG @base", - "from": "system", - "setting_id": "GFSG99_10", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG @BBL P1P", + "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "GFSG99_10", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json index d20ebf4c8f..0037591fe8 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL A1M.json @@ -1,16 +1,16 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL A1M", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG98_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL A1M", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG98_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json index 8aed5cdd51..fc0eb4132b 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PETG-CF @BBL P1P.json @@ -1,133 +1,52 @@ { - "type": "filament", - "name": "Generic PETG-CF @BBL P1P", - "inherits": "Generic PETG-CF @base", - "from": "system", - "setting_id": "GFSG50_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "40" - ], - "fan_min_speed": [ - "5" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "overhang_fan_speed": [ - "100" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PETG-CF @BBL P1P", + "inherits": "Generic PETG-CF @base", + "from": "system", + "setting_id": "GFSG50_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "40" + ], + "fan_min_speed": [ + "5" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "overhang_fan_speed": [ + "100" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json index 184f9fb820..fb08c2ca3c 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P 0.2 nozzle.json @@ -1,140 +1,67 @@ { - "type": "filament", - "name": "Generic PLA @BBL P1P 0.2 nozzle", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic PLA @BBL P1P 0.2 nozzle", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json index d8b0101523..23782d1f63 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA @BBL P1P.json @@ -1,139 +1,66 @@ { - "type": "filament", - "name": "Generic PLA @BBL P1P", - "inherits": "Generic PLA @base", - "from": "system", - "setting_id": "GFSL99_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA @BBL P1P", + "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "GFSL99_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json index d5f59fdd60..e2685df9da 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA Silk @BBL P1P.json @@ -1,121 +1,52 @@ { - "type": "filament", - "name": "Generic PLA Silk @BBL P1P", - "inherits": "Generic PLA Silk @base", - "from": "system", - "setting_id": "GFSL99_12", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "7.5", - "7.5" - ], - "filament_retraction_length": [ - "0.5", - "0.5" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA Silk @BBL P1P", + "inherits": "Generic PLA Silk @base", + "from": "system", + "setting_id": "GFSL99_12", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "7.5", + "7.5" + ], + "filament_retraction_length": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json index e9bb177e32..cb5333cd10 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PLA-CF @BBL P1P.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "Generic PLA-CF @BBL P1P", - "inherits": "Generic PLA-CF @base", - "from": "system", - "setting_id": "GFSL98_10", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PLA-CF @BBL P1P", + "inherits": "Generic PLA-CF @base", + "from": "system", + "setting_id": "GFSL98_10", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json index f31777cd92..47e125476b 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "Generic PVA @BBL P1P 0.2 nozzle", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_11", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "0.5", - "0.5" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA @BBL P1P 0.2 nozzle", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_11", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "0.5", + "0.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json index 419ccd398a..55cbed4c0f 100644 --- a/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic PVA @BBL P1P.json @@ -1,139 +1,62 @@ { - "type": "filament", - "name": "Generic PVA @BBL P1P", - "inherits": "Generic PVA @base", - "from": "system", - "setting_id": "GFSS99_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "Generic PVA @BBL P1P", + "inherits": "Generic PVA @base", + "from": "system", + "setting_id": "GFSS99_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json index 88e4134e96..65d2637617 100644 --- a/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/Generic TPU @BBL P1P.json @@ -1,136 +1,63 @@ { - "type": "filament", - "name": "Generic TPU @BBL P1P", - "inherits": "Generic TPU @base", - "from": "system", - "setting_id": "GFSR99_10", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "3.2", - "3.2" - ], - "filament_retraction_length": [ - "0.4", - "0.4" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "1", - "1" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "45" - ], - "hot_plate_temp_initial_layer": [ - "45" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "240", - "240" - ], - "nozzle_temperature_initial_layer": [ - "240", - "240" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "45" - ], - "textured_plate_temp_initial_layer": [ - "45" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Generic TPU @BBL P1P", + "inherits": "Generic TPU @base", + "from": "system", + "setting_id": "GFSR99_10", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "3.2", + "3.2" + ], + "filament_retraction_length": [ + "0.4", + "0.4" + ], + "filament_flow_ratio": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "45" + ], + "hot_plate_temp_initial_layer": [ + "45" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "textured_plate_temp": [ + "45" + ], + "textured_plate_temp_initial_layer": [ + "45" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json index 4fd6b666ff..c7e57b79d2 100644 --- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P 0.2 nozzle.json @@ -1,33 +1,33 @@ { - "type": "filament", - "name": "PolyLite PLA @BBL P1P 0.2 nozzle", - "inherits": "PolyLite PLA @BBL X1C", - "from": "system", - "setting_id": "GFSL25_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "PolyLite PLA @BBL P1P 0.2 nozzle", + "inherits": "PolyLite PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL25_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json index 69209bc8e4..9d5f349afb 100644 --- a/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/PolyLite PLA @BBL P1P.json @@ -1,142 +1,65 @@ { - "type": "filament", - "name": "PolyLite PLA @BBL P1P", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL23_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "PolyLite PLA @BBL P1P", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL23_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json index fb85bceae3..c07ce9f912 100644 --- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P 0.2 nozzle.json @@ -1,33 +1,33 @@ { - "type": "filament", - "name": "PolyTerra PLA @BBL P1P 0.2 nozzle", - "inherits": "PolyTerra PLA @BBL X1C", - "from": "system", - "setting_id": "GFSL24_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "PolyTerra PLA @BBL P1P 0.2 nozzle", + "inherits": "PolyTerra PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL24_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json index 7c8deeb49b..69b0921119 100644 --- a/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/PolyTerra PLA @BBL P1P.json @@ -1,145 +1,72 @@ { - "type": "filament", - "name": "PolyTerra PLA @BBL P1P", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL22_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "PolyTerra PLA @BBL P1P", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL22_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json index 44f181161e..07b2229f3c 100644 --- a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P 0.2 nozzle.json @@ -1,137 +1,64 @@ { - "type": "filament", - "name": "eSUN PLA+ @BBL P1P 0.2 nozzle", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "eSUN PLA+ @BBL P1P 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json index a58a910685..c035419a13 100644 --- a/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json +++ b/resources/profiles/BBL/filament/P1P/eSUN PLA+ @BBL P1P.json @@ -1,142 +1,69 @@ { - "type": "filament", - "name": "eSUN PLA+ @BBL P1P", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_11", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "eSUN PLA+ @BBL P1P", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_11", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..cc4c87c614 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL A1 0.2 nozzle.json @@ -0,0 +1,32 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL A1 0.2 nozzle", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_07", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL A1.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL A1.json new file mode 100644 index 0000000000..a3b7e81cb0 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL A1.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL A1", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_06", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..2b495380a8 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D 0.2 nozzle.json @@ -0,0 +1,47 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL H2D 0.2 nozzle", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D.json new file mode 100644 index 0000000000..d6958015ed --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2D.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL H2D", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "270", + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json index eb3061aefd..e46a562702 100644 --- a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP 0.2 nozzle.json @@ -1,128 +1,47 @@ { - "type": "filament", - "name": "PolyLite ABS @BBL H2DP 0.2 nozzle", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_13", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite ABS @BBL H2DP 0.2 nozzle", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_13", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP.json index 0b7bedab85..198c6f733a 100644 --- a/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP.json +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL H2DP.json @@ -1,130 +1,49 @@ { - "type": "filament", - "name": "PolyLite ABS @BBL H2DP", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite ABS @BBL H2DP", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..b0c5fdeea6 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P 0.2 nozzle.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL P1P 0.2 nozzle", + "inherits": "PolyLite ABS @BBL P1P", + "from": "system", + "setting_id": "GFSB60_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json new file mode 100644 index 0000000000..57d32de9a7 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL P1P.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL P1P", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_04", + "instantiation": "true", + "fan_max_speed": [ + "20" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..00dfc1ce7c --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C 0.2 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1C 0.2 nozzle", + "inherits": "PolyLite ABS @BBL X1C", + "from": "system", + "setting_id": "GFSB60_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json new file mode 100644 index 0000000000..1c7fc1b9cd --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1C.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1C", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..19c60e69a6 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E 0.2 nozzle.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1E 0.2 nozzle", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json new file mode 100644 index 0000000000..0faec54939 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @BBL X1E.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "PolyLite ABS @BBL X1E", + "inherits": "PolyLite ABS @base", + "from": "system", + "setting_id": "GFSB60_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ABS @base.json b/resources/profiles/BBL/filament/PolyLite ABS @base.json new file mode 100644 index 0000000000..fbf5115c8d --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ABS @base.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "PolyLite ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFOvv91M", + "instantiation": "false", + "filament_cost": [ + "26.9" + ], + "filament_density": [ + "1.03" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..9af117439b --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL A1 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL A1 0.2 nozzle", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_06", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL A1.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL A1.json new file mode 100644 index 0000000000..34b6c7aeec --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL A1.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL A1", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_07", + "instantiation": "true", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..5561e145a5 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D 0.2 nozzle.json @@ -0,0 +1,47 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL H2D 0.2 nozzle", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_09", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D.json new file mode 100644 index 0000000000..6249f32a8d --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2D.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL H2D", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_08", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "13", + "13", + "13" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json index 190a1660e0..a7d2f4c0cf 100644 --- a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP 0.2 nozzle.json @@ -1,128 +1,47 @@ { - "type": "filament", - "name": "PolyLite ASA @BBL H2DP 0.2 nozzle", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_13", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite ASA @BBL H2DP 0.2 nozzle", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_13", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP.json index e988e906e5..c783391392 100644 --- a/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL H2DP.json @@ -1,130 +1,49 @@ { - "type": "filament", - "name": "PolyLite ASA @BBL H2DP", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_12", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "13", - "13" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite ASA @BBL H2DP", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_12", + "instantiation": "true", + "chamber_temperatures": [ + "60" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "13", + "13" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..df67920c50 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P 0.2 nozzle.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL P1P 0.2 nozzle", + "inherits": "PolyLite ASA @BBL P1P", + "from": "system", + "setting_id": "GFSB61_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json new file mode 100644 index 0000000000..1c12dfe123 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL P1P.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL P1P", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "13", + "13" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..b72ce3ee14 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1C 0.2 nozzle", + "inherits": "PolyLite ASA @BBL X1C", + "from": "system", + "setting_id": "GFSB61_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "compatible_printers": [ + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json new file mode 100644 index 0000000000..f6468d59dc --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1C.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1C", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "13", + "13" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json new file mode 100644 index 0000000000..5fbc07eba1 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E 0.2 nozzle.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1E 0.2 nozzle", + "inherits": "PolyLite ASA @BBL X1E", + "from": "system", + "setting_id": "GFSB61_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json new file mode 100644 index 0000000000..7a38dd89e0 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @BBL X1E.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "PolyLite ASA @BBL X1E", + "inherits": "PolyLite ASA @base", + "from": "system", + "setting_id": "GFSB61_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "13", + "13" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite ASA @base.json b/resources/profiles/BBL/filament/PolyLite ASA @base.json new file mode 100644 index 0000000000..37321c6c18 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite ASA @base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "PolyLite ASA @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OFvrXuV7", + "instantiation": "false", + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "filament_cost": [ + "23.6" + ], + "filament_density": [ + "1.02" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..abf1ba8144 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1 0.2 nozzle.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL A1 0.2 nozzle", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_07", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1.json new file mode 100644 index 0000000000..af9b277e33 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1.json @@ -0,0 +1,31 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL A1", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_06", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..a7cc88d94e --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M 0.2 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL A1M 0.2 nozzle", + "inherits": "PolyLite PETG @BBL A1M", + "from": "system", + "setting_id": "GFSG60_05", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json new file mode 100644 index 0000000000..81ade454bf --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL A1M.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL A1M", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_04", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "8" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..cd37d7c51a --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2D 0.2 nozzle.json @@ -0,0 +1,44 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL H2D 0.2 nozzle", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_09", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2D.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2D.json new file mode 100644 index 0000000000..3e90dda823 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2D.json @@ -0,0 +1,55 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL H2D", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_08", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json index d1282565a6..ff8daffd6e 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP 0.2 nozzle.json @@ -1,125 +1,44 @@ { - "type": "filament", - "name": "PolyLite PETG @BBL H2DP 0.2 nozzle", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_15", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PETG @BBL H2DP 0.2 nozzle", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_15", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP.json index 4a4e2abb5f..24fcafab4f 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2DP.json @@ -1,130 +1,49 @@ { - "type": "filament", - "name": "PolyLite PETG @BBL H2DP", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_14", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PETG @BBL H2DP", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_14", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S 0.2 nozzle.json index c7bda040d6..0bdcad3735 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S 0.2 nozzle.json @@ -1,128 +1,63 @@ { - "type": "filament", - "name": "PolyLite PETG @BBL H2S 0.2 nozzle", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_11", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PETG @BBL H2S 0.2 nozzle", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_11", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S.json index 996592f2e0..912cb9a3ed 100644 --- a/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S.json +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL H2S.json @@ -1,130 +1,70 @@ { - "type": "filament", - "name": "PolyLite PETG @BBL H2S", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_10", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PETG @BBL H2S", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_10", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json new file mode 100644 index 0000000000..6460d78cc5 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P 0.2 nozzle.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL P1P 0.2 nozzle", + "inherits": "PolyLite PETG @BBL P1P", + "from": "system", + "setting_id": "GFSG60_03", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json new file mode 100644 index 0000000000..9b0b409cb9 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL P1P.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL P1P", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_02", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..3a20a86939 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C 0.2 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL X1C 0.2 nozzle", + "inherits": "PolyLite PETG @BBL X1C", + "from": "system", + "setting_id": "GFSG60_01", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json new file mode 100644 index 0000000000..fb7f801850 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @BBL X1C.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "PolyLite PETG @BBL X1C", + "inherits": "PolyLite PETG @base", + "from": "system", + "setting_id": "GFSG60_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "11.5", + "11.5" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PETG @base.json b/resources/profiles/BBL/filament/PolyLite PETG @base.json new file mode 100644 index 0000000000..fbb0bc606f --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PETG @base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "PolyLite PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OF0UJcb6", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..8f74b11f71 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL A1 0.2 nozzle", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1.json new file mode 100644 index 0000000000..442136617d --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL A1", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..e4370afe23 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL A1M 0.2 nozzle", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.6" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json new file mode 100644 index 0000000000..8394e1c7a0 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL A1M", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..a3a4f16430 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2D 0.2 nozzle.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL H2D 0.2 nozzle", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2D.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2D.json new file mode 100644 index 0000000000..1401530e33 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2D.json @@ -0,0 +1,58 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL H2D", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json index a39780c993..40cc6c44ff 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,50 @@ { - "type": "filament", - "name": "PolyLite PLA @BBL H2DP 0.2 nozzle", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_11", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PLA @BBL H2DP 0.2 nozzle", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_11", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP.json index fd3121455c..221400c275 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2DP.json @@ -1,133 +1,52 @@ { - "type": "filament", - "name": "PolyLite PLA @BBL H2DP", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PLA @BBL H2DP", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S 0.2 nozzle.json index e0e9a27a90..bcd5226a9e 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S 0.2 nozzle.json @@ -1,134 +1,69 @@ { - "type": "filament", - "name": "PolyLite PLA @BBL H2S 0.2 nozzle", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PLA @BBL H2S 0.2 nozzle", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S.json index 412c539efe..8ff8f89d35 100644 --- a/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S.json +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL H2S.json @@ -1,136 +1,76 @@ { - "type": "filament", - "name": "PolyLite PLA @BBL H2S", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyLite PLA @BBL H2S", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL00_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "15", + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json new file mode 100644 index 0000000000..7fa1a7c38a --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1.json @@ -0,0 +1,50 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL X1", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL23", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..9e77e960c3 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL X1C 0.2 nozzle", + "inherits": "PolyLite PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL25", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.6", + "1.6" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json new file mode 100644 index 0000000000..5a48b53ef0 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @BBL X1C.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "PolyLite PLA @BBL X1C", + "inherits": "PolyLite PLA @base", + "from": "system", + "setting_id": "GFSL19", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "15", + "15" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyLite PLA @base.json b/resources/profiles/BBL/filament/PolyLite PLA @base.json new file mode 100644 index 0000000000..889386ff02 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyLite PLA @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "PolyLite PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OF5CgdDq", + "instantiation": "false", + "filament_cost": [ + "25.4" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..8d2f7468e5 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL A1 0.2 nozzle", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1.json new file mode 100644 index 0000000000..85c3dc64d7 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL A1", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..e0d6699dfc --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL A1M 0.2 nozzle", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json new file mode 100644 index 0000000000..7a9187dd37 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL A1M.json @@ -0,0 +1,40 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL A1M", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_00", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..953eeecc26 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2D 0.2 nozzle.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL H2D 0.2 nozzle", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_05", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2D.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2D.json new file mode 100644 index 0000000000..7ac8e71cb9 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2D.json @@ -0,0 +1,63 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL H2D", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_04", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json index d49d58adb9..a6b996fa3d 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "PolyTerra PLA @BBL H2DP 0.2 nozzle", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_11", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyTerra PLA @BBL H2DP 0.2 nozzle", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_11", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP.json index c3d4420887..f9923d5ca0 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "PolyTerra PLA @BBL H2DP", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_10", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyTerra PLA @BBL H2DP", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_10", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S 0.2 nozzle.json index d8411109ca..38d5fec0ca 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S 0.2 nozzle.json @@ -1,134 +1,73 @@ { - "type": "filament", - "name": "PolyTerra PLA @BBL H2S 0.2 nozzle", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_07", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyTerra PLA @BBL H2S 0.2 nozzle", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_07", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S.json index cb993e30f0..ee6b8e2e36 100644 --- a/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S.json +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL H2S.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "PolyTerra PLA @BBL H2S", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_06", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "PolyTerra PLA @BBL H2S", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL01_06", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "22", + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json new file mode 100644 index 0000000000..6ba4b8cea7 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL X1", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL22", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..c98cd55f63 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C 0.2 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL X1C 0.2 nozzle", + "inherits": "PolyTerra PLA @BBL X1C", + "from": "system", + "setting_id": "GFSL24", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json new file mode 100644 index 0000000000..54103da726 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @BBL X1C.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @BBL X1C", + "inherits": "PolyTerra PLA @base", + "from": "system", + "setting_id": "GFSL18", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/PolyTerra PLA @base.json b/resources/profiles/BBL/filament/PolyTerra PLA @base.json new file mode 100644 index 0000000000..9921a87a02 --- /dev/null +++ b/resources/profiles/BBL/filament/PolyTerra PLA @base.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "PolyTerra PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFW29a9R", + "instantiation": "false", + "filament_cost": [ + "25.4" + ], + "filament_density": [ + "1.31" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "Polymaker" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL H2D.json index 3df18a415b..0781e6b428 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL H2D.json @@ -1,129 +1,61 @@ { - "type": "filament", - "name": "Fiberon PA12-CF @BBL H2D", - "inherits": "Fiberon PA12-CF @base", - "from": "system", - "setting_id": "GFL52_10", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "260", - "260" - ], - "nozzle_temperature_range_high": [ - "300", - "300" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA12-CF @BBL H2D", + "inherits": "Fiberon PA12-CF @base", + "from": "system", + "setting_id": "GFL52_10", + "instantiation": "true", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "14", + "14" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "260", + "260" + ], + "nozzle_temperature_range_high": [ + "300", + "300" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL X1C.json index 7e063562a8..77ec86e028 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @BBL X1C.json @@ -1,124 +1,47 @@ { - "type": "filament", - "name": "Fiberon PA12-CF @BBL X1C", - "inherits": "Fiberon PA12-CF @base", - "from": "system", - "setting_id": "GFSL52_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "14", - "14" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA12-CF @BBL X1C", + "inherits": "Fiberon PA12-CF @base", + "from": "system", + "setting_id": "GFSL52_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "14", + "14" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json index a5aa03bf9b..53026a9fc6 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF @base.json @@ -1,71 +1,74 @@ { - "type": "filament", - "name": "Fiberon PA12-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFX0ycRQ", - "instantiation": "false", - "eng_plate_temp": [ - "40" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "100" - ], - "filament_cost": [ - "99.99" - ], - "filament_density": [ - "1.06" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Polymaker" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_low": [ - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "temperature_vitrification": [ - "131" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ] -} + "type": "filament", + "name": "Fiberon PA12-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFX0ycRQ", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "99.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "131" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL H2D.json index f68c6fbec1..0e00407d54 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL H2D.json @@ -1,129 +1,60 @@ { - "type": "filament", - "name": "Fiberon PA6-CF @BBL H2D", - "inherits": "Fiberon PA6-CF @base", - "from": "system", - "setting_id": "GFL50_10", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "14", - "14" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "280", - "280" - ], - "nozzle_temperature_range_high": [ - "300", - "300" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA6-CF @BBL H2D", + "inherits": "Fiberon PA6-CF @base", + "from": "system", + "setting_id": "GFL50_10", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "14", + "14" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "280", + "280" + ], + "nozzle_temperature_range_high": [ + "300", + "300" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL X1C.json index f5d2e10233..c44de48c6e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @BBL X1C.json @@ -1,124 +1,47 @@ { - "type": "filament", - "name": "Fiberon PA6-CF @BBL X1C", - "inherits": "Fiberon PA6-CF @base", - "from": "system", - "setting_id": "GFSL50_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "14", - "14" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA6-CF @BBL X1C", + "inherits": "Fiberon PA6-CF @base", + "from": "system", + "setting_id": "GFSL50_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "14", + "14" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json index 823e8a0ff1..c17c5a8807 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF @base.json @@ -1,68 +1,68 @@ { - "type": "filament", - "name": "Fiberon PA6-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFkOviHk", - "instantiation": "false", - "eng_plate_temp": [ - "40" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "100" - ], - "filament_cost": [ - "83.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "temperature_vitrification": [ - "215" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ] -} + "type": "filament", + "name": "Fiberon PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFkOviHk", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "83.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "215" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL H2D.json index efd01686ae..a083fc6562 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL H2D.json @@ -1,132 +1,63 @@ { - "type": "filament", - "name": "Fiberon PA6-GF @BBL H2D", - "inherits": "Fiberon PA6-GF @base", - "from": "system", - "setting_id": "GFL51_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "280", - "280" - ], - "nozzle_temperature_range_high": [ - "300", - "300" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA6-GF @BBL H2D", + "inherits": "Fiberon PA6-GF @base", + "from": "system", + "setting_id": "GFL51_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "12" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "280", + "280" + ], + "nozzle_temperature_range_high": [ + "300", + "300" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL X1C.json index ac8b6d5cde..7716d0e93a 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @BBL X1C.json @@ -1,127 +1,50 @@ { - "type": "filament", - "name": "Fiberon PA6-GF @BBL X1C", - "inherits": "Fiberon PA6-GF @base", - "from": "system", - "setting_id": "GFSL51_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA6-GF @BBL X1C", + "inherits": "Fiberon PA6-GF @base", + "from": "system", + "setting_id": "GFSL51_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json index 607b1c8e00..dd2665f5ae 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF @base.json @@ -1,71 +1,74 @@ { - "type": "filament", - "name": "Fiberon PA6-GF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFwaYjL6", - "instantiation": "false", - "eng_plate_temp": [ - "40" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "100" - ], - "filament_cost": [ - "63.99" - ], - "filament_density": [ - "1.2" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PA-GF" - ], - "filament_vendor": [ - "Polymaker" - ], - "full_fan_speed_layer": [ - "2" - ], - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "temperature_vitrification": [ - "191" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ] -} + "type": "filament", + "name": "Fiberon PA6-GF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFwaYjL6", + "instantiation": "false", + "eng_plate_temp": [ + "40" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "63.99" + ], + "filament_density": [ + "1.2" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PA-GF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "191" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL H2D.json index fafc3e6f12..cf04cac658 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL H2D.json @@ -1,129 +1,60 @@ { - "type": "filament", - "name": "Fiberon PA612-CF @BBL H2D", - "inherits": "Fiberon PA612-CF @base", - "from": "system", - "setting_id": "GFL53_10", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "260", - "260" - ], - "nozzle_temperature_range_high": [ - "300", - "300" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA612-CF @BBL H2D", + "inherits": "Fiberon PA612-CF @base", + "from": "system", + "setting_id": "GFL53_10", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "260", + "260" + ], + "nozzle_temperature_range_high": [ + "300", + "300" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL X1C.json index 2c30f1ea55..996c126b0e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @BBL X1C.json @@ -1,124 +1,51 @@ { - "type": "filament", - "name": "Fiberon PA612-CF @BBL X1C", - "inherits": "Fiberon PA612-CF @base", - "from": "system", - "setting_id": "GFSL53_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.96", - "0.96" - ], - "filament_max_volumetric_speed": [ - "8", - "8" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PA612-CF @BBL X1C", + "inherits": "Fiberon PA612-CF @base", + "from": "system", + "setting_id": "GFSL53_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.96", + "0.96" + ], + "filament_max_volumetric_speed": [ + "8", + "8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json index 3765f754f5..25ca59d6e4 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF @base.json @@ -1,41 +1,44 @@ { - "type": "filament", - "name": "Fiberon PA612-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFS2tn6G", - "instantiation": "false", - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "94.99" - ], - "filament_density": [ - "1.06" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_vendor": [ - "Polymaker" - ], - "full_fan_speed_layer": [ - "2" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "temperature_vitrification": [ - "180" - ] -} + "type": "filament", + "name": "Fiberon PA612-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFS2tn6G", + "instantiation": "false", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "94.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "additional_fan_full_speed_layer": [ + "2" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @base.json deleted file mode 100644 index 310a2229d9..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @base.json +++ /dev/null @@ -1,53 +0,0 @@ -{ - "type": "filament", - "name": "Fiberon PA612-CF15 @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFcBl0nJ", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "94.99" - ], - "filament_density": [ - "1.03" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "Polymaker" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "206.2" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL H2D.json index f1c0a4eb3c..853a775bfb 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL H2D.json @@ -1,135 +1,66 @@ { - "type": "filament", - "name": "Fiberon PET-CF @BBL H2D", - "inherits": "Fiberon PET-CF @base", - "from": "system", - "setting_id": "GFL54_10", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "270", - "270" - ], - "nozzle_temperature_range_high": [ - "300", - "300" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "2" - ], - "temperature_vitrification": [ - "70" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PET-CF @BBL H2D", + "inherits": "Fiberon PET-CF @base", + "from": "system", + "setting_id": "GFL54_10", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "270", + "270" + ], + "nozzle_temperature_range_high": [ + "300", + "300" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "temperature_vitrification": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL X1C.json index 381ed4d225..74b61e0684 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @BBL X1C.json @@ -1,124 +1,47 @@ { - "type": "filament", - "name": "Fiberon PET-CF @BBL X1C", - "inherits": "Fiberon PET-CF @base", - "from": "system", - "setting_id": "GFSL54_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "300", - "300" - ], - "nozzle_temperature_initial_layer": [ - "300", - "300" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PET-CF @BBL X1C", + "inherits": "Fiberon PET-CF @base", + "from": "system", + "setting_id": "GFSL54_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "300", + "300" + ], + "nozzle_temperature_initial_layer": [ + "300", + "300" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json index 2ca2a42d04..72bd1c1e72 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF @base.json @@ -1,46 +1,46 @@ { - "type": "filament", - "name": "Fiberon PET-CF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFHWSM21", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "242" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "89.99" - ], - "filament_density": [ - "1.34" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "Polymaker" - ], + "type": "filament", + "name": "Fiberon PET-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFHWSM21", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "242" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "89.99" + ], + "filament_density": [ + "1.34" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "Polymaker" + ], "filament_adhesiveness_category": [ "800" ], @@ -65,49 +65,49 @@ "filament_dev_drying_softening_temperature": [ "150" ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature_range_low": [ - "270" - ], - "nozzle_temperature_range_high": [ - "300" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "required_nozzle_HRC": [ - "40" - ], - "supertack_plate_temp": [ - "80" - ], - "supertack_plate_temp_initial_layer": [ - "80" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "147" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_low": [ + "270" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "required_nozzle_HRC": [ + "40" + ], + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "147" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL H2D.json index a7a8c44207..e24fa75f9f 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL H2D.json @@ -1,132 +1,63 @@ { - "type": "filament", - "name": "Fiberon PETG-ESD @BBL H2D", - "inherits": "Fiberon PETG-ESD @base", - "from": "system", - "setting_id": "GFL06_10", - "instantiation": "true", - "filament_cost": [ - "29.99" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "20", - "20" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "250", - "250" - ], - "nozzle_temperature_range_high": [ - "290", - "290" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PETG-ESD @BBL H2D", + "inherits": "Fiberon PETG-ESD @base", + "from": "system", + "setting_id": "GFL06_10", + "instantiation": "true", + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "29.99" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "250", + "250" + ], + "nozzle_temperature_range_high": [ + "290", + "290" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL X1C.json index 539e0f19c8..efbd277fdc 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL X1C.json @@ -1,127 +1,50 @@ { - "type": "filament", - "name": "Fiberon PETG-ESD @BBL X1C", - "inherits": "Fiberon PETG-ESD @base", - "from": "system", - "setting_id": "GFSL06_00", - "instantiation": "true", - "filament_cost": [ - "29.99" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "20", - "20" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "290", - "290" - ], - "nozzle_temperature_initial_layer": [ - "290", - "290" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PETG-ESD @BBL X1C", + "inherits": "Fiberon PETG-ESD @base", + "from": "system", + "setting_id": "GFSL06_00", + "instantiation": "true", + "filament_cost": [ + "29.99" + ], + "filament_max_volumetric_speed": [ + "20", + "20" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "290", + "290" + ], + "nozzle_temperature_initial_layer": [ + "290", + "290" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json index b459cc68a1..1633157e93 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @base.json @@ -1,77 +1,77 @@ { - "type": "filament", - "name": "Fiberon PETG-ESD @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFcytyoA", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "15" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "0" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "290" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "76" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Fiberon PETG-ESD @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFcytyoA", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "15" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "76" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL H2D.json index 5a25ec639e..bec50bda20 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL H2D.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL H2D.json @@ -1,138 +1,69 @@ { - "type": "filament", - "name": "Fiberon PETG-rCF @BBL H2D", - "inherits": "Fiberon PETG-rCF @base", - "from": "system", - "setting_id": "GFL55_10", - "instantiation": "true", - "fan_cooling_layer_time": [ - "15" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.24" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_low": [ - "240", - "240" - ], - "nozzle_temperature_range_high": [ - "270", - "270" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PETG-rCF @BBL H2D", + "inherits": "Fiberon PETG-rCF @base", + "from": "system", + "setting_id": "GFL55_10", + "instantiation": "true", + "fan_cooling_layer_time": [ + "15" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.24" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature_range_low": [ + "240", + "240" + ], + "nozzle_temperature_range_high": [ + "270", + "270" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL X1C.json index 570446a8bf..45134d520e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL X1C.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @BBL X1C.json @@ -1,124 +1,47 @@ { - "type": "filament", - "name": "Fiberon PETG-rCF @BBL X1C", - "inherits": "Fiberon PETG-rCF @base", - "from": "system", - "setting_id": "GFSL55_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "270", - "270" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} + "type": "filament", + "name": "Fiberon PETG-rCF @BBL X1C", + "inherits": "Fiberon PETG-rCF @base", + "from": "system", + "setting_id": "GFSL55_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "270", + "270" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json index f052304624..2927c4526b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json +++ b/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF @base.json @@ -1,80 +1,80 @@ { - "type": "filament", - "name": "Fiberon PETG-rCF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFk8t9mz", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "12" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "39.99" - ], - "filament_density": [ - "1.3" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG-CF" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "required_nozzle_HRC": [ - "40" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "Fiberon PETG-rCF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFk8t9mz", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "12" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "39.99" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @base.json deleted file mode 100644 index e3e21d17a1..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma CoPE @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFqw2PQA", - "instantiation": "false", - "filament_cost": [ - "19.99" - ], - "filament_density": [ - "1.29" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "24" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "58" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @base.json deleted file mode 100644 index 5f4c2682db..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @base.json +++ /dev/null @@ -1,44 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFsRDvTM", - "instantiation": "false", - "filament_cost": [ - "19.99" - ], - "filament_density": [ - "1.32" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Polymaker" - ], - "filament_wipe": [ - "0" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "58" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @base.json deleted file mode 100644 index 18382eb7a0..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Celestial @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFRiYgMK", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @base.json deleted file mode 100644 index bf84a536a4..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Galaxy @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFFkCLBl", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @base.json deleted file mode 100644 index ab3032ad57..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Glow @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF0gGRWk", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @base.json deleted file mode 100644 index 14a805212e..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Luminous @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF0kCNDK", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @base.json deleted file mode 100644 index 63680ba1b7..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Marble @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFKiSMWR", - "instantiation": "false", - "filament_cost": [ - "21.99" - ], - "filament_density": [ - "1.31" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @base.json deleted file mode 100644 index 33d880ac08..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Matte @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFrOh600", - "instantiation": "false", - "filament_cost": [ - "20.99" - ], - "filament_density": [ - "1.31" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @base.json deleted file mode 100644 index 89ce745162..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Metallic @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFjb0wos", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @base.json deleted file mode 100644 index bd8f5fc0d6..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Neon @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFO1GEq6", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @base.json deleted file mode 100644 index 94c2cb7c0b..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Silk @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFS8lTQt", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.31" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "58" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @base.json deleted file mode 100644 index 8622a109f2..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Starlight @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFC78WGQ", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @base.json deleted file mode 100644 index d0d6f6b057..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Temp Shift @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFhASRWj", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @base.json deleted file mode 100644 index ac8842d912..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA Translucent @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFCIUsWh", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @base.json b/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @base.json deleted file mode 100644 index 986b46fd5d..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Panchroma PLA UV Shift @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF1N1qMK", - "instantiation": "false", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "61" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL A1 0.2 nozzle.json deleted file mode 100644 index 620cc411a6..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,32 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL A1 0.2 nozzle", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_07", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL A1.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL A1.json deleted file mode 100644 index 71f1f5a3c2..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL A1.json +++ /dev/null @@ -1,31 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL A1", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_06", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json deleted file mode 100644 index 3747e77ed3..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D 0.2 nozzle.json +++ /dev/null @@ -1,128 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL H2D 0.2 nozzle", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D.json deleted file mode 100644 index 3e81dfee44..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL H2D.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL H2D", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL P1P 0.2 nozzle.json deleted file mode 100644 index 04c89f69fd..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL P1P 0.2 nozzle.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL P1P 0.2 nozzle", - "inherits": "PolyLite ABS @BBL P1P", - "from": "system", - "setting_id": "GFSB60_05", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL P1P.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL P1P.json deleted file mode 100644 index 4b0d29fef5..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL P1P.json +++ /dev/null @@ -1,139 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL P1P", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_04", - "instantiation": "true", - "fan_max_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.4 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1C 0.2 nozzle.json deleted file mode 100644 index 45c74dfd07..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL X1C 0.2 nozzle", - "inherits": "PolyLite ABS @BBL X1C", - "from": "system", - "setting_id": "GFSB60_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1C.json deleted file mode 100644 index 6dadfc535e..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1C.json +++ /dev/null @@ -1,127 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL X1C", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1E 0.2 nozzle.json deleted file mode 100644 index cda3af8b09..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1E 0.2 nozzle.json +++ /dev/null @@ -1,119 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL X1E 0.2 nozzle", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_03", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1E.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1E.json deleted file mode 100644 index e936b14936..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @BBL X1E.json +++ /dev/null @@ -1,121 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @BBL X1E", - "inherits": "PolyLite ABS @base", - "from": "system", - "setting_id": "GFSB60_01", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "270", - "270" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @base.json deleted file mode 100644 index 11be66397d..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ABS @base.json +++ /dev/null @@ -1,23 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ABS @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFOvv91M", - "instantiation": "false", - "filament_cost": [ - "26.9" - ], - "filament_density": [ - "1.03" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_vendor": [ - "Polymaker" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL A1 0.2 nozzle.json deleted file mode 100644 index a38d211939..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL A1 0.2 nozzle", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_06", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL A1.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL A1.json deleted file mode 100644 index ae080355e9..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL A1.json +++ /dev/null @@ -1,13 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL A1", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_07", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json deleted file mode 100644 index a15a835b35..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D 0.2 nozzle.json +++ /dev/null @@ -1,128 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL H2D 0.2 nozzle", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_09", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D.json deleted file mode 100644 index 412217df5d..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL H2D.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL H2D", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_08", - "instantiation": "true", - "chamber_temperatures": [ - "60" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "13", - "13" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL P1P 0.2 nozzle.json deleted file mode 100644 index c293668107..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL P1P 0.2 nozzle.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL P1P 0.2 nozzle", - "inherits": "PolyLite ASA @BBL P1P", - "from": "system", - "setting_id": "GFSB61_05", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL P1P.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL P1P.json deleted file mode 100644 index 7d1d49e8b0..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL P1P.json +++ /dev/null @@ -1,121 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL P1P", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_04", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "13", - "13" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1C 0.2 nozzle.json deleted file mode 100644 index 7723f33269..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL X1C 0.2 nozzle", - "inherits": "PolyLite ASA @BBL X1C", - "from": "system", - "setting_id": "GFSB61_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "compatible_printers": [ - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1C.json deleted file mode 100644 index 6b3da4c0d2..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1C.json +++ /dev/null @@ -1,127 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL X1C", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_max_volumetric_speed": [ - "13", - "13" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1E 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1E 0.2 nozzle.json deleted file mode 100644 index ad34833c15..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1E 0.2 nozzle.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL X1E 0.2 nozzle", - "inherits": "PolyLite ASA @BBL X1E", - "from": "system", - "setting_id": "GFSB61_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1E.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1E.json deleted file mode 100644 index 8b637852dd..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @BBL X1E.json +++ /dev/null @@ -1,121 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @BBL X1E", - "inherits": "PolyLite ASA @base", - "from": "system", - "setting_id": "GFSB61_02", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "13", - "13" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "260", - "260" - ], - "nozzle_temperature_initial_layer": [ - "260", - "260" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @base.json deleted file mode 100644 index 026efbfb61..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite ASA @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite ASA @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OFvrXuV7", - "instantiation": "false", - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "filament_cost": [ - "23.6" - ], - "filament_density": [ - "1.02" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "13" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @base.json deleted file mode 100644 index 92739d13bb..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @base.json +++ /dev/null @@ -1,71 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite CosPLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFJgijky", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "20.99" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "59" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1 0.2 nozzle.json deleted file mode 100644 index fc1d7c9ccc..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,29 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL A1 0.2 nozzle", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_07", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1.json deleted file mode 100644 index 56ee99583a..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1.json +++ /dev/null @@ -1,31 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL A1", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_06", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 0.4 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1M 0.2 nozzle.json deleted file mode 100644 index b096b42ff1..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1M 0.2 nozzle.json +++ /dev/null @@ -1,14 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL A1M 0.2 nozzle", - "inherits": "PolyLite PETG @BBL A1M", - "from": "system", - "setting_id": "GFSG60_05", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1M.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1M.json deleted file mode 100644 index 0fd49e16b4..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL A1M.json +++ /dev/null @@ -1,19 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL A1M", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_04", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "8" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json deleted file mode 100644 index e385bf8477..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D 0.2 nozzle.json +++ /dev/null @@ -1,125 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL H2D 0.2 nozzle", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_09", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D.json deleted file mode 100644 index 07d4e46768..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL H2D.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL H2D", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_08", - "instantiation": "true", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL P1P 0.2 nozzle.json deleted file mode 100644 index d9c730cfe3..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL P1P 0.2 nozzle.json +++ /dev/null @@ -1,15 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL P1P 0.2 nozzle", - "inherits": "PolyLite PETG @BBL P1P", - "from": "system", - "setting_id": "GFSG60_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL P1P.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL P1P.json deleted file mode 100644 index d38bfdc04e..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL P1P.json +++ /dev/null @@ -1,136 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL P1P", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_02", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL X1C 0.2 nozzle.json deleted file mode 100644 index 87a2c0446a..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL X1C 0.2 nozzle", - "inherits": "PolyLite PETG @BBL X1C", - "from": "system", - "setting_id": "GFSG60_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL X1C.json deleted file mode 100644 index 5b4e022c74..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @BBL X1C.json +++ /dev/null @@ -1,133 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @BBL X1C", - "inherits": "PolyLite PETG @base", - "from": "system", - "setting_id": "GFSG60_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "11.5", - "11.5" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @base.json deleted file mode 100644 index 365f5f1460..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PETG @base.json +++ /dev/null @@ -1,59 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PETG @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OF0UJcb6", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1 0.2 nozzle.json deleted file mode 100644 index a994069549..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,38 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL A1 0.2 nozzle", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1.json deleted file mode 100644 index f52c8e2011..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1.json +++ /dev/null @@ -1,67 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL A1", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_02", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ], - "cool_plate_temp": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "bed_type": [ - "Cool Plate" - ], - "slow_down_min_speed": [ - "5" - ], - "slow_down_layer_time": [ - "2" - ], - "temperature_vitrification": [ - "61" - ], - "nozzle_temperature_range_high": [ - "230" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1M 0.2 nozzle.json deleted file mode 100644 index d6612569ee..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1M 0.2 nozzle.json +++ /dev/null @@ -1,38 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL A1M 0.2 nozzle", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.6" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1M.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1M.json deleted file mode 100644 index 57b3ab4e56..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL A1M.json +++ /dev/null @@ -1,67 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL A1M", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_00", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ], - "cool_plate_temp": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "bed_type": [ - "Cool Plate" - ], - "slow_down_min_speed": [ - "5" - ], - "slow_down_layer_time": [ - "2" - ], - "temperature_vitrification": [ - "61" - ], - "nozzle_temperature_range_high": [ - "230" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json deleted file mode 100644 index 020d4a28ff..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D 0.2 nozzle.json +++ /dev/null @@ -1,131 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL H2D 0.2 nozzle", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D.json deleted file mode 100644 index 09d44d45bd..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL H2D.json +++ /dev/null @@ -1,133 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL H2D", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL00_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1.json deleted file mode 100644 index 08bdd474a4..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1.json +++ /dev/null @@ -1,64 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL X1", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL23", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "cool_plate_temp": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "75" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "bed_type": [ - "Cool Plate" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "nozzle_temperature_range_high": [ - "230" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1C 0.2 nozzle.json deleted file mode 100644 index dea4fcd538..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL X1C 0.2 nozzle", - "inherits": "PolyLite PLA @BBL X1C", - "from": "system", - "setting_id": "GFSL25", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.6", - "1.6" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1C.json deleted file mode 100644 index 12436871ac..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @BBL X1C.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @BBL X1C", - "inherits": "PolyLite PLA @base", - "from": "system", - "setting_id": "GFSL19", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "15", - "15" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @base.json deleted file mode 100644 index 55ea664946..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA @base.json +++ /dev/null @@ -1,17 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF5CgdDq", - "instantiation": "false", - "filament_cost": [ - "25.4" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_vendor": [ - "Polymaker" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @base.json deleted file mode 100644 index 90996083f1..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @base.json +++ /dev/null @@ -1,68 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA Galaxy @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFvyB0Bz", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @base.json deleted file mode 100644 index 3a70d3a83f..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @base.json +++ /dev/null @@ -1,68 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA Glow @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF5umxxT", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @base.json deleted file mode 100644 index 14131c0348..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @base.json +++ /dev/null @@ -1,68 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA Luminous @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFBoSWxb", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @base.json deleted file mode 100644 index b9fc01a700..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @base.json +++ /dev/null @@ -1,68 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA Neon @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFitS8al", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @base.json deleted file mode 100644 index 93c6cf8c9f..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA Pro @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFF9OKoY", - "instantiation": "false", - "filament_cost": [ - "24.99" - ], - "filament_density": [ - "1.22" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "62" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @base.json deleted file mode 100644 index 3c8a79ed3f..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @base.json +++ /dev/null @@ -1,68 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA Starlight @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFIxOuOu", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @base.json b/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @base.json deleted file mode 100644 index 9a6155e283..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @base.json +++ /dev/null @@ -1,68 +0,0 @@ -{ - "type": "filament", - "name": "PolyLite PLA Translucent @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFy02QHU", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1 0.2 nozzle.json deleted file mode 100644 index 04497ac738..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,38 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @BBL A1 0.2 nozzle", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1M 0.2 nozzle.json deleted file mode 100644 index a8d1352806..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1M 0.2 nozzle.json +++ /dev/null @@ -1,38 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @BBL A1M 0.2 nozzle", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json deleted file mode 100644 index 2419d5ff05..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D 0.2 nozzle.json +++ /dev/null @@ -1,131 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @BBL H2D 0.2 nozzle", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_05", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D.json deleted file mode 100644 index 5a2083e6d1..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL H2D.json +++ /dev/null @@ -1,133 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @BBL H2D", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL01_04", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1.json deleted file mode 100644 index d3f601395b..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1.json +++ /dev/null @@ -1,64 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @BBL X1", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL22", - "instantiation": "true", - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "cool_plate_temp": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "75" - ], - "filament_cost": [ - "21.99" - ], - "filament_density": [ - "1.37" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "bed_type": [ - "Cool Plate" - ], - "slow_down_min_speed": [ - "5" - ], - "slow_down_layer_time": [ - "8" - ], - "temperature_vitrification": [ - "61" - ], - "nozzle_temperature_range_high": [ - "230" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1C 0.2 nozzle.json deleted file mode 100644 index 898906491a..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,18 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @BBL X1C 0.2 nozzle", - "inherits": "PolyTerra PLA @BBL X1C", - "from": "system", - "setting_id": "GFSL24", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1C.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1C.json deleted file mode 100644 index 7231c1a703..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL X1C.json +++ /dev/null @@ -1,130 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @BBL X1C", - "inherits": "PolyTerra PLA @base", - "from": "system", - "setting_id": "GFSL18", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @base.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @base.json deleted file mode 100644 index 3b13c5b55c..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @base.json +++ /dev/null @@ -1,20 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFW29a9R", - "instantiation": "false", - "filament_cost": [ - "25.4" - ], - "filament_density": [ - "1.31" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "Polymaker" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @base.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @base.json deleted file mode 100644 index ea65b41ec4..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @base.json +++ /dev/null @@ -1,77 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA Marble @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFxe4rXr", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "21.99" - ], - "filament_density": [ - "1.37" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "61" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @base.json b/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @base.json deleted file mode 100644 index 1d322a6c3e..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @base.json +++ /dev/null @@ -1,71 +0,0 @@ -{ - "type": "filament", - "name": "PolyTerra PLA+ @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFEjbwqG", - "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "filament_cost": [ - "20.99" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Polymaker" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "overhang_fan_speed": [ - "75" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "5" - ], - "temperature_vitrification": [ - "59" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_type": [ - "PLA" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @base.json b/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @base.json deleted file mode 100644 index 94ab2b2fd9..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @base.json +++ /dev/null @@ -1,47 +0,0 @@ -{ - "type": "filament", - "name": "Polymaker HT-PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFPoyiFs", - "instantiation": "false", - "filament_cost": [ - "26.99" - ], - "filament_density": [ - "1.28" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "24" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "60" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ] -} diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @base.json b/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @base.json deleted file mode 100644 index 585a6dd554..0000000000 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @base.json +++ /dev/null @@ -1,41 +0,0 @@ -{ - "type": "filament", - "name": "Polymaker HT-PLA-GF @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFlwmqrC", - "instantiation": "false", - "filament_cost": [ - "32.99" - ], - "filament_density": [ - "1.34" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "24" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "nozzle_temperature_range_low": [ - "210" - ], - "slow_down_layer_time": [ - "4" - ], - "temperature_vitrification": [ - "60" - ] -} diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json index c71d490498..b6a0c61f4e 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "SUNLU PLA Marble @BBL A1", - "inherits": "SUNLU PLA Marble @base", - "from": "system", - "setting_id": "GFSNLS06_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Marble @BBL A1", + "inherits": "SUNLU PLA Marble @base", + "from": "system", + "setting_id": "GFSNLS06_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json index e6fbcc08f4..61db76c30c 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL A1M.json @@ -1,43 +1,43 @@ { - "type": "filament", - "name": "SUNLU PLA Marble @BBL A1M", - "inherits": "SUNLU PLA Marble @base", - "from": "system", - "setting_id": "GFSNLS06_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Marble @BBL A1M", + "inherits": "SUNLU PLA Marble @base", + "from": "system", + "setting_id": "GFSNLS06_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json index bb04f33946..0a103c995c 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL P1P.json @@ -1,142 +1,77 @@ { - "type": "filament", - "name": "SUNLU PLA Marble @BBL P1P", - "inherits": "SUNLU PLA Marble @base", - "from": "system", - "setting_id": "GFSNLS06_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Marble @BBL P1P", + "inherits": "SUNLU PLA Marble @base", + "from": "system", + "setting_id": "GFSNLS06_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json index d179444017..7b284a250c 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "SUNLU PLA Marble @BBL X1", - "inherits": "SUNLU PLA Marble @base", - "from": "system", - "setting_id": "GFSNLS06_00", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Marble @BBL X1", + "inherits": "SUNLU PLA Marble @base", + "from": "system", + "setting_id": "GFSNLS06_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json index 17d7143d71..3b0d6858e8 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @BBL X1C.json @@ -1,130 +1,65 @@ { - "type": "filament", - "name": "SUNLU PLA Marble @BBL X1C", - "inherits": "SUNLU PLA Marble @base", - "from": "system", - "setting_id": "GFSNLS06", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA Marble @BBL X1C", + "inherits": "SUNLU PLA Marble @base", + "from": "system", + "setting_id": "GFSNLS06", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json index d2f34323a0..65ac195c51 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Marble PLA @base.json @@ -1,29 +1,29 @@ { - "type": "filament", - "name": "SUNLU PLA Marble @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFxUwUeW", - "instantiation": "false", - "filament_cost": [ - "31.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "SUNLU" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA Marble @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFxUwUeW", + "instantiation": "false", + "filament_cost": [ + "31.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "SUNLU" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json index d22531c5be..8e75032c56 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.2 nozzle.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL A1 0.2 nozzle", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_03", - "instantiation": "true", - "filament_flow_ratio": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL A1 0.2 nozzle", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_03", + "instantiation": "true", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json index fa85784f11..82e181089b 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1 0.8 nozzle.json @@ -1,24 +1,24 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL A1 0.8 nozzle", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_04", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL A1 0.8 nozzle", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_04", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json index 452e5b37df..e58d9fe6af 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL A1", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL A1", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json index 8f9a075819..d3814b6e17 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.2 nozzle.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL A1M 0.2 nozzle", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_06", - "instantiation": "true", - "filament_flow_ratio": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "1" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL A1M 0.2 nozzle", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_06", + "instantiation": "true", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "1" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json index 70e66dc87f..31dc5a3066 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M 0.8 nozzle.json @@ -1,21 +1,21 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL A1M 0.8 nozzle", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_07", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.94" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL A1M 0.8 nozzle", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_07", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.94" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json index 12862d015a..aa3c971f2a 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL A1M.json @@ -1,17 +1,17 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL A1M 0.4 nozzle", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_05", - "instantiation": "true", - "filament_flow_ratio": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL A1M 0.4 nozzle", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_05", + "instantiation": "true", + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json index 61b7382140..ef381a8b89 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.2 nozzle.json @@ -1,123 +1,50 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL X1C 0.2 nozzle", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1", - "1" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL X1C 0.2 nozzle", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_00", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json index 36c3f0dace..99dc78c918 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C 0.8 nozzle.json @@ -1,134 +1,61 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL X1C 0.8 nozzle", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08_01", - "instantiation": "true", - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "20" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL X1C 0.8 nozzle", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08_01", + "instantiation": "true", + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "20" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json index eb8150137d..80b85c3ffc 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @BBL X1C.json @@ -1,123 +1,50 @@ { - "type": "filament", - "name": "SUNLU PETG @BBL X1C", - "inherits": "SUNLU PETG @base", - "from": "system", - "setting_id": "GFSNLS08", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "14", - "14" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_flow_ratio": [ - "0.95", - "0.95" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "250", - "250" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PETG @BBL X1C", + "inherits": "SUNLU PETG @base", + "from": "system", + "setting_id": "GFSNLS08", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "14", + "14" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "250", + "250" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json index 6e3eaf356e..2017491981 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PETG @base.json @@ -1,84 +1,84 @@ { - "type": "filament", - "name": "SUNLU PETG @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OF2GCW1l", - "instantiation": "false", - "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "22.99" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_vendor": [ - "SUNLU" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "nozzle_temperature": [ - "245" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "12" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "temperature_vitrification": [ - "68" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OF2GCW1l", + "instantiation": "false", + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "22.99" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "temperature_vitrification": [ + "68" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json index 136d9a1a32..a3784f0810 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL A1 0.2 nozzle", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL A1 0.2 nozzle", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json index 8d4bc7b750..c821ebfe15 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL A1", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL A1", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json index 3161d71550..b8b97dd984 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL A1M 0.2 nozzle", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_08", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL A1M 0.2 nozzle", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_08", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json index 3b36e5eec2..54c1a6119e 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL A1M", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL A1M", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json index da4cd0a24e..464e056c8c 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL P1P 0.2 nozzle", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL P1P 0.2 nozzle", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json index 00b5289533..6054f5fd07 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL P1P.json @@ -1,142 +1,77 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL P1P", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL P1P", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json index a21dc559f1..0715879a5e 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1.json @@ -1,127 +1,62 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL X1", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_01", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL X1", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json index e47881e2f2..984234aba0 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL X1C 0.2 nozzle", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02_00", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL X1C 0.2 nozzle", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json index 06e1cfcd50..d2f04837ed 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @BBL X1C.json @@ -1,130 +1,65 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @BBL X1C", - "inherits": "SUNLU PLA Matte @base", - "from": "system", - "setting_id": "GFSNLS02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "21", - "21" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @BBL X1C", + "inherits": "SUNLU PLA Matte @base", + "from": "system", + "setting_id": "GFSNLS02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "21", + "21" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json index f3b92cdb2f..de4010d324 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA Matte @base.json @@ -1,53 +1,53 @@ { - "type": "filament", - "name": "SUNLU PLA Matte @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFpW4gdi", - "instantiation": "false", - "filament_cost": [ - "25.99" - ], - "filament_density": [ - "1.3" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "filament_vendor": [ - "SUNLU" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "nozzle_temperature_range_high": [ - "245" - ], - "nozzle_temperature_range_low": [ - "205" - ], - "temperature_vitrification": [ - "54" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA Matte @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFpW4gdi", + "instantiation": "false", + "filament_cost": [ + "25.99" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "nozzle_temperature_range_high": [ + "245" + ], + "nozzle_temperature_range_low": [ + "205" + ], + "temperature_vitrification": [ + "54" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json index 746a96be8d..20a3d734d5 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL A1 0.2 nozzle", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json index 6ee2d24002..19dbeb3614 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL A1", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL A1", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json index 4089650498..a639584679 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL A1M 0.2 nozzle", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json index 03e20eeae0..8bd011b007 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL A1M", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL A1M", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json index e86690c4fa..f8329334a4 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL P1P 0.2 nozzle", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json index 59431aad39..b6bccf5151 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL P1P.json @@ -1,142 +1,77 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL P1P", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL P1P", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json index c07fa6fd28..f4095c084c 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1.json @@ -1,127 +1,62 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL X1", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_00", - "instantiation": "true", - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL X1", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_00", + "instantiation": "true", + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json index cf1c66fdd1..15650c2e9f 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL X1C 0.2 nozzle", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04_01", + "instantiation": "true", + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json index f9b28938c4..4ba9c15f3e 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @BBL X1C.json @@ -1,130 +1,65 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @BBL X1C", - "inherits": "SUNLU PLA+ 2.0 @base", - "from": "system", - "setting_id": "GFSNLS04", - "instantiation": "true", - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "22", - "22" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @BBL X1C", + "inherits": "SUNLU PLA+ 2.0 @base", + "from": "system", + "setting_id": "GFSNLS04", + "instantiation": "true", + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "22", + "22" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json index d2b1087f28..b7c3ad36f0 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ 2.0 @base.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "SUNLU PLA+ 2.0 @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFHmPYRy", - "instantiation": "false", - "filament_cost": [ - "18.99" - ], - "filament_density": [ - "1.21" - ], - "filament_flow_ratio": [ - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "filament_vendor": [ - "SUNLU" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "temperature_vitrification": [ - "54" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ 2.0 @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFHmPYRy", + "instantiation": "false", + "filament_cost": [ + "18.99" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "temperature_vitrification": [ + "54" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json index 6aeee35734..d64023ebed 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL A1 0.2 nozzle", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL A1 0.2 nozzle", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json index c77349c9ac..28a92ffbcd 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL A1", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL A1", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json index cec61b3a90..ab27e92d49 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL A1M 0.2 nozzle", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL A1M 0.2 nozzle", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json index 40488898f6..1adf40a022 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL A1M", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL A1M", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json index 5856a69870..23227067a2 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P 0.2 nozzle.json @@ -1,137 +1,72 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL P1P 0.2 nozzle", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL P1P 0.2 nozzle", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json index 11336bfb68..092d213cca 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL P1P.json @@ -1,142 +1,77 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL P1P", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL P1P", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json index b37471ed79..72d5e42f96 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1.json @@ -1,127 +1,62 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL X1", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_00", - "instantiation": "true", - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL X1", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_00", + "instantiation": "true", + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json index 8774c874ce..8e9428f1dd 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL X1C 0.2 nozzle", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL X1C 0.2 nozzle", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03_01", + "instantiation": "true", + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json index da293f6b48..d6e52505a1 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @BBL X1C.json @@ -1,127 +1,62 @@ { - "type": "filament", - "name": "SUNLU PLA+ @BBL X1C", - "inherits": "SUNLU PLA+ @base", - "from": "system", - "setting_id": "GFSNLS03", - "instantiation": "true", - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @BBL X1C", + "inherits": "SUNLU PLA+ @base", + "from": "system", + "setting_id": "GFSNLS03", + "instantiation": "true", + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json index c46fb9affc..ad0170f289 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU PLA+ @base.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "SUNLU PLA+ @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFMUWNkp", - "instantiation": "false", - "filament_cost": [ - "18.99" - ], - "filament_density": [ - "1.23" - ], - "filament_flow_ratio": [ - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_vendor": [ - "SUNLU" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "temperature_vitrification": [ - "54" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFMUWNkp", + "instantiation": "false", + "filament_cost": [ + "18.99" + ], + "filament_density": [ + "1.23" + ], + "filament_flow_ratio": [ + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "temperature_vitrification": [ + "54" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json index 2f524eef2b..51aef0f369 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL A1 0.2 nozzle", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL A1 0.2 nozzle", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json index 526bc5d716..842b07f125 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL A1", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL A1", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json index 570f5a0de5..bfa3187978 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL A1M 0.2 nozzle", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_07", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "2" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL A1M 0.2 nozzle", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_07", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "2" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json index fed22243bd..470fb3880a 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL A1M.json @@ -1,37 +1,37 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL A1M", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL A1M", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json index e6c41c46c9..76ee99930e 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P 0.2 nozzle.json @@ -1,131 +1,66 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL P1P 0.2 nozzle", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_03", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.2 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL P1P 0.2 nozzle", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_03", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json index b98d0ed67f..afb63f8fd3 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL P1P.json @@ -1,136 +1,71 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL P1P", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL P1P", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json index 980359bb5a..7950b1b749 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1.json @@ -1,124 +1,59 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL X1", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL X1", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json index ed0ca92a7b..95997d7276 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C 0.2 nozzle.json @@ -1,125 +1,60 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL X1C 0.2 nozzle", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "2", - "2" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL X1C 0.2 nozzle", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "2", + "2" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json index 55e8349ec4..592744f786 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @BBL X1C.json @@ -1,130 +1,65 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @BBL X1C", - "inherits": "SUNLU Silk PLA+ @base", - "from": "system", - "setting_id": "GFSNLS05", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "230", - "230" - ], - "nozzle_temperature_initial_layer": [ - "230", - "230" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @BBL X1C", + "inherits": "SUNLU Silk PLA+ @base", + "from": "system", + "setting_id": "GFSNLS05", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json index 22e7994783..4368a784e6 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Silk PLA+ @base.json @@ -1,54 +1,54 @@ { - "type": "filament", - "name": "SUNLU Silk PLA+ @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFpPGSKG", - "instantiation": "false", - "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", - "filament_cost": [ - "29.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "SUNLU" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_gap": [ - "0%" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "54" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Silk PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFpPGSKG", + "instantiation": "false", + "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "54" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json index 224f465980..67ba026aba 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "SUNLU Wood PLA @BBL A1", - "inherits": "SUNLU Wood PLA @base", - "from": "system", - "setting_id": "GFSNLS07_02", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Wood PLA @BBL A1", + "inherits": "SUNLU Wood PLA @base", + "from": "system", + "setting_id": "GFSNLS07_02", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json index e5943c3222..5318be2d56 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL A1M.json @@ -1,40 +1,40 @@ { - "type": "filament", - "name": "SUNLU Wood PLA @BBL A1M", - "inherits": "SUNLU Wood PLA @base", - "from": "system", - "setting_id": "GFSNLS07_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "6" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Wood PLA @BBL A1M", + "inherits": "SUNLU Wood PLA @base", + "from": "system", + "setting_id": "GFSNLS07_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json index 5ecdb93c9c..ff61f6d3ce 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL P1P.json @@ -1,145 +1,92 @@ { - "type": "filament", - "name": "SUNLU Wood PLA @BBL P1P", - "inherits": "SUNLU Wood PLA @base", - "from": "system", - "setting_id": "GFSNLS07_01", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_min_speed": [ - "50" - ], - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "4", - "4" - ], - "filament_retraction_speed": [ - "50", - "50" - ], - "filament_deretraction_speed": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab P1P 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Wood PLA @BBL P1P", + "inherits": "SUNLU Wood PLA @base", + "from": "system", + "setting_id": "GFSNLS07_01", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_min_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "4", + "4" + ], + "filament_retraction_speed": [ + "50", + "50" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab P1P 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json index cd3b48f9af..ec47af1a1f 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1.json @@ -1,127 +1,74 @@ { - "type": "filament", - "name": "SUNLU Wood PLA @BBL X1", - "inherits": "SUNLU Wood PLA @base", - "from": "system", - "setting_id": "GFSNLS07_00", - "instantiation": "true", - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "4", - "4" - ], - "filament_retraction_speed": [ - "50", - "50" - ], - "filament_deretraction_speed": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "8" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Wood PLA @BBL X1", + "inherits": "SUNLU Wood PLA @base", + "from": "system", + "setting_id": "GFSNLS07_00", + "instantiation": "true", + "filament_deretraction_speed": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "4", + "4" + ], + "filament_retraction_speed": [ + "50", + "50" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json index f99e4d0815..166a646452 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @BBL X1C.json @@ -1,127 +1,74 @@ { - "type": "filament", - "name": "SUNLU Wood PLA @BBL X1C", - "inherits": "SUNLU Wood PLA @base", - "from": "system", - "setting_id": "GFSNLS07", - "instantiation": "true", - "filament_flow_ratio": [ - "1.0", - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1", - "1" - ], - "filament_retraction_distances_when_cut": [ - "18", - "18" - ], - "filament_retraction_length": [ - "4", - "4" - ], - "filament_retraction_speed": [ - "50", - "50" - ], - "filament_deretraction_speed": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} + "type": "filament", + "name": "SUNLU Wood PLA @BBL X1C", + "inherits": "SUNLU Wood PLA @base", + "from": "system", + "setting_id": "GFSNLS07", + "instantiation": "true", + "filament_deretraction_speed": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "1.0", + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18" + ], + "filament_retraction_length": [ + "4", + "4" + ], + "filament_retraction_speed": [ + "50", + "50" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json index e13c06ceb8..643b47bab5 100644 --- a/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json +++ b/resources/profiles/BBL/filament/SUNLU/SUNLU Wood PLA @base.json @@ -1,62 +1,62 @@ { - "type": "filament", - "name": "SUNLU Wood PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFLJ8S6I", - "instantiation": "false", - "filament_cost": [ - "26.99" - ], - "filament_density": [ - "1.10" - ], - "filament_flow_ratio": [ - "1.0" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_retraction_length": [ - "4" - ], - "filament_retraction_speed": [ - "50" - ], - "filament_deretraction_speed": [ - "0" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "SUNLU" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "5%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature_range_low": [ - "195" - ], - "temperature_vitrification": [ - "54" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} + "type": "filament", + "name": "SUNLU Wood PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFLJ8S6I", + "instantiation": "false", + "filament_cost": [ + "26.99" + ], + "filament_density": [ + "1.10" + ], + "filament_flow_ratio": [ + "1.0" + ], + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "filament_retraction_length": [ + "4" + ], + "filament_retraction_speed": [ + "50" + ], + "filament_deretraction_speed": [ + "0" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "SUNLU" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_scarf_height": [ + "5%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature_range_low": [ + "195" + ], + "temperature_vitrification": [ + "54" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1 0.2 nozzle.json new file mode 100644 index 0000000000..d6e8e925bd --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL A1 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_06", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1.json new file mode 100644 index 0000000000..072c2c94cc --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL A1", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_05", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json new file mode 100644 index 0000000000..ced8418038 --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M 0.2 nozzle.json @@ -0,0 +1,38 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL A1M 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_04", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_max_volumetric_speed": [ + "1.8" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json new file mode 100644 index 0000000000..9b71d17e27 --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL A1M.json @@ -0,0 +1,37 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL A1M", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_03", + "instantiation": "true", + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "slow_down_layer_time": [ + "8" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle", + "Bambu Lab A1 mini 0.6 nozzle", + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2D 0.2 nozzle.json new file mode 100644 index 0000000000..fa909a3fd2 --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2D 0.2 nozzle.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL H2D 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_08", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2D.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2D.json new file mode 100644 index 0000000000..a2343c6b4e --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2D.json @@ -0,0 +1,63 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL H2D", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_07", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP 0.2 nozzle.json index 5089f0a41f..e9c9c8caa5 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP 0.2 nozzle.json @@ -1,131 +1,54 @@ { - "type": "filament", - "name": "eSUN PLA+ @BBL H2DP 0.2 nozzle", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_16", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "eSUN PLA+ @BBL H2DP 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_16", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP.json index f1cc7cfa13..0b1ef208ab 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2DP.json @@ -1,133 +1,56 @@ { - "type": "filament", - "name": "eSUN PLA+ @BBL H2DP", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_15", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "eSUN PLA+ @BBL H2DP", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_15", + "instantiation": "true", + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S 0.2 nozzle.json index 13bc6f4cf7..eb6e63dd5c 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S 0.2 nozzle.json @@ -1,134 +1,73 @@ { - "type": "filament", - "name": "eSUN PLA+ @BBL H2S 0.2 nozzle", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_12", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "3", - "3" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "eSUN PLA+ @BBL H2S 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_12", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_volumetric_speed": [ + "3", + "3" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S.json index fe5752183a..0a60b92b11 100644 --- a/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S.json +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL H2S.json @@ -1,136 +1,81 @@ { - "type": "filament", - "name": "eSUN PLA+ @BBL H2S", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_09", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "75" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0", - "0" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2S 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} + "type": "filament", + "name": "eSUN PLA+ @BBL H2S", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_09", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "75" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_cooling_before_tower": [ + "10", + "10", + "10" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "0", + "0", + "0" + ], + "filament_max_volumetric_speed": [ + "16", + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual_e3d" + ], + "long_retractions_when_ec": [ + "0", + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2S 0.8 nozzle" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json new file mode 100644 index 0000000000..df1c6a5e5d --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL X1", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_02", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json new file mode 100644 index 0000000000..7e3c941a9f --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C 0.2 nozzle.json @@ -0,0 +1,49 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL X1C 0.2 nozzle", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_01", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "1.8", + "1.8" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json new file mode 100644 index 0000000000..712a1335d4 --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @BBL X1C.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @BBL X1C", + "inherits": "eSUN PLA+ @base", + "from": "system", + "setting_id": "GFSL03_00", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "16", + "16" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "include": [ + "fdm_filament_template_direct_dual" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "compatible_printers": [ + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab X1E 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN PLA+ @base.json b/resources/profiles/BBL/filament/eSUN PLA+ @base.json new file mode 100644 index 0000000000..7a40d0187f --- /dev/null +++ b/resources/profiles/BBL/filament/eSUN PLA+ @base.json @@ -0,0 +1,29 @@ +{ + "type": "filament", + "name": "eSUN PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFqINlYj", + "instantiation": "false", + "filament_cost": [ + "22.99" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "eSUN" + ], + "slow_down_layer_time": [ + "6" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1 0.2 nozzle.json deleted file mode 100644 index 7ec0d0250e..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1 0.2 nozzle.json +++ /dev/null @@ -1,38 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL A1 0.2 nozzle", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_06", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1.json deleted file mode 100644 index 9831a42950..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1.json +++ /dev/null @@ -1,37 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL A1", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_05", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1M 0.2 nozzle.json deleted file mode 100644 index d8ad009b96..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1M 0.2 nozzle.json +++ /dev/null @@ -1,38 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL A1M 0.2 nozzle", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_04", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_max_volumetric_speed": [ - "1.8" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1M.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1M.json deleted file mode 100644 index a7ab593c50..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL A1M.json +++ /dev/null @@ -1,37 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL A1M", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_03", - "instantiation": "true", - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "slow_down_layer_time": [ - "8" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json deleted file mode 100644 index 32f2e2c009..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D 0.2 nozzle.json +++ /dev/null @@ -1,131 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL H2D 0.2 nozzle", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_08", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D.json deleted file mode 100644 index 1589c492cc..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL H2D.json +++ /dev/null @@ -1,133 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL H2D", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_07", - "instantiation": "true", - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "1", - "1" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "10", - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D 0.8 nozzle" - ], - "filament_start_gcode": [ - "; filament start gcode\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1.json deleted file mode 100644 index 553c2ea312..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1.json +++ /dev/null @@ -1,124 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL X1", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_02", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_layer_time": [ - "10" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1C 0.2 nozzle.json deleted file mode 100644 index e0de21b614..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1C 0.2 nozzle.json +++ /dev/null @@ -1,122 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL X1C 0.2 nozzle", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_01", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "1.8", - "1.8" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1C.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1C.json deleted file mode 100644 index 5975af1cb2..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @BBL X1C.json +++ /dev/null @@ -1,127 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @BBL X1C", - "inherits": "eSUN PLA+ @base", - "from": "system", - "setting_id": "GFSL03_00", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "16", - "16" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "220", - "220" - ], - "nozzle_temperature_initial_layer": [ - "220", - "220" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "compatible_printers": [ - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab X1E 0.8 nozzle" - ] -} diff --git a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @base.json b/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @base.json deleted file mode 100644 index 6820e79489..0000000000 --- a/resources/profiles/BBL/filament/eSUN/eSUN PLA+ @base.json +++ /dev/null @@ -1,29 +0,0 @@ -{ - "type": "filament", - "name": "eSUN PLA+ @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFqINlYj", - "instantiation": "false", - "filament_cost": [ - "22.99" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "eSUN" - ], - "slow_down_layer_time": [ - "6" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ] -} diff --git a/resources/profiles/BBL/filament/fdm_filament_abs.json b/resources/profiles/BBL/filament/fdm_filament_abs.json index 4eb47ce0bd..4b8086b836 100644 --- a/resources/profiles/BBL/filament/fdm_filament_abs.json +++ b/resources/profiles/BBL/filament/fdm_filament_abs.json @@ -1,48 +1,48 @@ { - "type": "filament", - "name": "fdm_filament_abs", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "activate_air_filtration": [ - "1" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.04" - ], - "filament_max_volumetric_speed": [ - "28.6" - ], - "filament_type": [ - "ABS" - ], - "filament_adhesiveness_category": [ - "200" - ], + "type": "filament", + "name": "fdm_filament_abs", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "28.6" + ], + "filament_type": [ + "ABS" + ], + "filament_adhesiveness_category": [ + "200" + ], "filament_dev_ams_drying_time": [ "12", "8.0", @@ -64,52 +64,52 @@ "filament_dev_drying_softening_temperature": [ "80" ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "20" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_asa.json b/resources/profiles/BBL/filament/fdm_filament_asa.json index b5ae3ad8b5..b3d8d48b54 100644 --- a/resources/profiles/BBL/filament/fdm_filament_asa.json +++ b/resources/profiles/BBL/filament/fdm_filament_asa.json @@ -1,48 +1,48 @@ { - "type": "filament", - "name": "fdm_filament_asa", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "activate_air_filtration": [ - "1" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "fan_cooling_layer_time": [ - "35" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.04" - ], - "filament_max_volumetric_speed": [ - "28.6" - ], - "filament_type": [ - "ASA" - ], - "filament_adhesiveness_category": [ - "200" - ], + "type": "filament", + "name": "fdm_filament_asa", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "fan_cooling_layer_time": [ + "35" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "28.6" + ], + "filament_type": [ + "ASA" + ], + "filament_adhesiveness_category": [ + "200" + ], "filament_dev_ams_drying_time": [ "12", "8.0", @@ -64,55 +64,55 @@ "filament_dev_drying_softening_temperature": [ "85" ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "impact_strength_z": [ - "4.9" - ], - "nozzle_temperature": [ - "260" - ], - "nozzle_temperature_initial_layer": [ - "260" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "3" - ], - "slow_down_min_speed": [ - "20" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "impact_strength_z": [ + "4.9" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "3" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_bvoh.json b/resources/profiles/BBL/filament/fdm_filament_bvoh.json index ee15cc5e30..5755e3bdbb 100644 --- a/resources/profiles/BBL/filament/fdm_filament_bvoh.json +++ b/resources/profiles/BBL/filament/fdm_filament_bvoh.json @@ -1,48 +1,51 @@ { - "type": "filament", - "name": "fdm_filament_bvoh", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "40" - ], - "cool_plate_temp_initial_layer": [ - "40" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "69.99" - ], - "filament_density": [ - "1.13" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "BVOH" - ], + "type": "filament", + "name": "fdm_filament_bvoh", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "40" + ], + "cool_plate_temp_initial_layer": [ + "40" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "69.99" + ], + "filament_density": [ + "1.13" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "BVOH" + ], "filament_dev_chamber_drying_bed_temperature": [ "80" ], @@ -71,46 +74,46 @@ "filament_dev_drying_softening_temperature": [ "50" ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "45" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_common.json b/resources/profiles/BBL/filament/fdm_filament_common.json index caa037c74b..29f0d6a529 100644 --- a/resources/profiles/BBL/filament/fdm_filament_common.json +++ b/resources/profiles/BBL/filament/fdm_filament_common.json @@ -1,301 +1,400 @@ { - "type": "filament", - "name": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "0" - ], - "chamber_temperatures": [ - "0" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "close_additional_fan_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "70" - ], - "cool_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "counter_coef_1": [ - "0" - ], - "counter_coef_2": [ - "0.008" - ], - "counter_coef_3": [ - "-0.041" - ], - "counter_limit_min": [ - "-0.035" - ], - "counter_limit_max": [ - "0.033" - ], - "circle_compensation_speed": [ - "200" - ], - "during_print_exhaust_fan_speed": [ - "70" - ], - "diameter_limit": [ - "50" - ], - "eng_plate_temp": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "fan_cooling_layer_time": [ - "60" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "35" - ], - "filament_cost": [ - "0" - ], - "filament_density": [ - "0" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_diameter": [ - "1.75" - ], - "filament_flow_ratio": [ - "1" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_volumetric_speed": [ - "0" - ], - "filament_is_support": [ - "0" - ], - "filament_long_retractions_when_cut": [ - "nil" - ], - "filament_long_retractions_when_ec": [ - "nil" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_ramming_volumetric_speed": [ - "-1" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_tower_interface_pre_extrusion_dist": [ - "10" - ], - "filament_tower_interface_pre_extrusion_length": [ - "0" - ], - "filament_tower_ironing_area": [ - "4" - ], - "filament_tower_interface_purge_volume": [ - "20" - ], - "filament_tower_interface_print_temp": [ - "-1" - ], - "filament_printable": [ - "3" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil" - ], - "filament_retraction_distances_when_ec": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_settings_id": [ - "" - ], - "filament_soluble": [ - "0" - ], - "filament_type": [ - "PLA" - ], - "filament_vendor": [ - "Generic" - ], - "filament_wipe": [ - "nil" - ], - "filament_wipe_distance": [ - "nil" - ], - "filament_prime_volume": [ - "45" - ], - "filament_z_hop": [ - "nil" - ], - "filament_z_hop_types": [ - "nil" - ], - "full_fan_speed_layer": [ - "0" - ], - "additional_fan_full_speed_layer": [ - "0" - ], - "filament_extruder_variant": [ - "Direct Drive Standard" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "10%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "filament_shrink": [ - "100%" - ], - "filament_pre_cooling_temperature": [ - "0" - ], - "filament_ramming_travel_time": [ - "0" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "hole_coef_1": [ - "0" - ], - "hole_coef_2": [ - "-0.008" - ], - "hole_coef_3": [ - "0.23415" - ], - "hole_limit_min": [ - "0.088" - ], - "hole_limit_max": [ - "0.22" - ], - "impact_strength_z": [ - "10" - ], - "long_retractions_when_ec": [ - "0" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "240" - ], - "nozzle_temperature": [ - "200" - ], - "nozzle_temperature_initial_layer": [ - "200" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "95%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "3" - ], - "retraction_distances_when_ec": [ - "0" - ], - "supertack_plate_temp": [ - "45" - ], - "supertack_plate_temp_initial_layer": [ - "45" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "100" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "filament_velocity_adaptation_factor": [ - "1" - ], - "compatible_printers": [], - "filament_start_gcode": [ - "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \nM106 P3 S0\n" - ], - "filament_adaptive_volumetric_speed": [ - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0" - ] + "type": "filament", + "name": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "0" + ], + "additional_cooling_fan_speed": [ + "0" + ], + "chamber_temperatures": [ + "0" + ], + "circle_compensation_speed": [ + "200" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "counter_coef_1": [ + "0" + ], + "counter_coef_2": [ + "0.008" + ], + "counter_coef_3": [ + "-0.041" + ], + "counter_limit_max": [ + "0.033" + ], + "counter_limit_min": [ + "-0.035" + ], + "diameter_limit": [ + "50" + ], + "during_print_exhaust_fan_speed": [ + "70" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "60" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "35" + ], + "filament_adaptive_volumetric_speed": [ + "0" + ], + "filament_extruder_compatibility": [ + "0" + ], + "filament_cooling_before_tower": [ + "0" + ], + "filament_preheat_temperature_delta":[ + "0" + ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_ironing_area": [ + "4" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_cost": [ + "0" + ], + "filament_density": [ + "0" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45.0" + ], + "filament_dev_ams_drying_temperature": [ + "40.0", + "40.0", + "40.0", + "40.0" + ], + "filament_dev_ams_drying_time": [ + "8.0", + "8.0", + "8.0", + "8.0" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "90.0" + ], + "filament_dev_chamber_drying_time": [ + "12.0" + ], + "filament_dev_drying_cooling_temperature": [ + "35.0" + ], + "filament_dev_drying_softening_temperature": [ + "40.0" + ], + "filament_diameter": [ + "1.75" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_flush_temp": [ + "0" + ], + "filament_flush_temp_fast": [ + "0" + ], + "filament_flush_volumetric_speed": [ + "0" + ], + "filament_is_support": [ + "0" + ], + "filament_long_retractions_when_cut": [ + "nil" + ], + "filament_long_retractions_when_ec": [ + "nil" + ], + "filament_max_volumetric_speed": [ + "0" + ], + "filament_metal_stickiness": [ + "None" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_pre_cooling_temperature": [ + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_printable": [ + "3" + ], + "filament_ramming_travel_time_nc": [ + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil" + ], + "filament_retraction_distances_when_ec": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_settings_id": [ + "" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Generic" + ], + "filament_wipe": [ + "nil" + ], + "filament_wipe_distance": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_z_hop_types": [ + "nil" + ], + "full_fan_speed_layer": [ + "0" + ], + "additional_fan_full_speed_layer": [ + "0" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_ramming_travel_time": [ + "0" + ], + "filament_retract_length_nc": [ + "14" + ], + "filament_enable_overhang_speed": [ + "1" + ], + "filament_overhang_1_4_speed": [ + "0" + ], + "filament_overhang_2_4_speed": [ + "50" + ], + "filament_overhang_3_4_speed": [ + "30" + ], + "filament_overhang_4_4_speed": [ + "10" + ], + "filament_overhang_totally_speed": [ + "10" + ], + "filament_bridge_speed": [ + "25" + ], + "filament_change_length": [ + "10" + ], + "filament_velocity_adaptation_factor": [ + "1" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "filament_ingredients_safe": "1", + "filament_emission_safe": "1", + "filament_contact_safe": "1", + "hole_coef_1": [ + "0" + ], + "hole_coef_2": [ + "-0.008" + ], + "hole_coef_3": [ + "0.23415" + ], + "hole_limit_max": [ + "0.22" + ], + "hole_limit_min": [ + "0.088" + ], + "impact_strength_z": [ + "10" + ], + "long_retractions_when_ec": [ + "0" + ], + "no_slow_down_for_cooling_on_outwalls": [ + "0" + ], + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "override_process_overhang_speed": [ + "0" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "cooling_slowdown_logic": [ + "uniform_cooling" + ], + "cooling_perimeter_transition_distance": [ + "10" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ], + "supertack_plate_temp": [ + "45" + ], + "supertack_plate_temp_initial_layer": [ + "45" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "compatible_printers": [], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \nM106 P3 S0\n" + ] } diff --git a/resources/profiles/BBL/filament/fdm_filament_dual_common.json b/resources/profiles/BBL/filament/fdm_filament_dual_common.json deleted file mode 100644 index c36dc19ffc..0000000000 --- a/resources/profiles/BBL/filament/fdm_filament_dual_common.json +++ /dev/null @@ -1,75 +0,0 @@ -{ - "type": "filament", - "name": "fdm_filament_dual_common", - "from": "system", - "instantiation": "false", - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_max_volumetric_speed": [ - "", - "" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_prime_volume": [ - "45" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_flow_ratio": [ - "", - "" - ], - "filament_change_length": [ - "10" - ], - "nozzle_temperature": [ - "", - "" - ], - "nozzle_temperature_initial_layer": [ - "", - "" - ], - "filament_velocity_adaptation_factor": [ - "1" - ] -} diff --git a/resources/profiles/BBL/filament/fdm_filament_eva.json b/resources/profiles/BBL/filament/fdm_filament_eva.json index a3f9ab0011..8edbe3f6ff 100644 --- a/resources/profiles/BBL/filament/fdm_filament_eva.json +++ b/resources/profiles/BBL/filament/fdm_filament_eva.json @@ -1,12 +1,12 @@ { - "type": "filament", - "name": "fdm_filament_eva", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "filament_type": [ - "EVA" - ], + "type": "filament", + "name": "fdm_filament_eva", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "filament_type": [ + "EVA" + ], "filament_dev_chamber_drying_bed_temperature": [ "70" ], @@ -35,13 +35,13 @@ "filament_dev_drying_softening_temperature": [ "50" ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_hips.json b/resources/profiles/BBL/filament/fdm_filament_hips.json index 7016a866f6..ff43b5f174 100644 --- a/resources/profiles/BBL/filament/fdm_filament_hips.json +++ b/resources/profiles/BBL/filament/fdm_filament_hips.json @@ -1,44 +1,44 @@ { - "type": "filament", - "name": "fdm_filament_hips", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "90" - ], - "eng_plate_temp_initial_layer": [ - "90" - ], - "fan_cooling_layer_time": [ - "10" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "22.99" - ], - "filament_density": [ - "1.06" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "HIPS" - ], - "filament_adhesiveness_category": [ - "798" + "type": "filament", + "name": "fdm_filament_hips", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "fan_cooling_layer_time": [ + "10" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "22.99" + ], + "filament_density": [ + "1.06" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_type": [ + "HIPS" + ], + "filament_adhesiveness_category": [ + "798" ], "filament_dev_ams_drying_time": [ "12", @@ -60,50 +60,50 @@ ], "filament_dev_drying_softening_temperature": [ "80" - ], - "hot_plate_temp": [ - "90" - ], - "hot_plate_temp_initial_layer": [ - "90" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pa.json b/resources/profiles/BBL/filament/fdm_filament_pa.json index 61aeed66ce..361b84bf3b 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pa.json +++ b/resources/profiles/BBL/filament/fdm_filament_pa.json @@ -1,48 +1,51 @@ { - "type": "filament", - "name": "fdm_filament_pa", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "activate_air_filtration": [ - "1" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_cooling_layer_time": [ - "4" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.04" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "PA" - ], - "filament_adhesiveness_category": [ - "400" - ], + "type": "filament", + "name": "fdm_filament_pa", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "4" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_metal_stickiness": [ + "High" + ], + "filament_type": [ + "PA" + ], + "filament_adhesiveness_category": [ + "400" + ], "filament_dev_ams_drying_time": [ "12", "12", @@ -67,52 +70,52 @@ "filament_dev_drying_softening_temperature": [ "150" ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "300" - ], - "nozzle_temperature_range_low": [ - "260" - ], - "overhang_fan_speed": [ - "30" - ], - "required_nozzle_HRC": [ - "40" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "20" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "108" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "30" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "108" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pc.json b/resources/profiles/BBL/filament/fdm_filament_pc.json index a73a56b440..7a61e458cc 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pc.json +++ b/resources/profiles/BBL/filament/fdm_filament_pc.json @@ -1,45 +1,45 @@ { - "type": "filament", - "name": "fdm_filament_pc", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "110" - ], - "eng_plate_temp_initial_layer": [ - "110" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "60" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.04" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_type": [ - "PC" - ], - "filament_adhesiveness_category": [ - "500" - ], + "type": "filament", + "name": "fdm_filament_pc", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "60" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.04" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_type": [ + "PC" + ], + "filament_adhesiveness_category": [ + "500" + ], "filament_dev_ams_drying_time": [ "12", "8.0", @@ -61,55 +61,55 @@ "filament_dev_drying_softening_temperature": [ "90" ], - "hot_plate_temp": [ - "110" - ], - "hot_plate_temp_initial_layer": [ - "110" - ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_high": [ - "290" - ], - "nozzle_temperature_range_low": [ - "260" - ], - "overhang_fan_speed": [ - "60" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "20" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "120" - ], - "textured_plate_temp": [ - "110" - ], - "textured_plate_temp_initial_layer": [ - "110" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "280" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "60" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "120" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pctg.json b/resources/profiles/BBL/filament/fdm_filament_pctg.json index 01810a2ddc..0f6e163ba0 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pctg.json +++ b/resources/profiles/BBL/filament/fdm_filament_pctg.json @@ -1,33 +1,36 @@ { - "type": "filament", - "name": "fdm_filament_pctg", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.27" - ], - "filament_max_volumetric_speed": [ - "25" - ], - "filament_type": [ - "PCTG" - ], + "type": "filament", + "name": "fdm_filament_pctg", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_metal_stickiness": [ + "High" + ], + "filament_type": [ + "PCTG" + ], "filament_dev_chamber_drying_bed_temperature": [ "80" ], @@ -59,46 +62,46 @@ "filament_dev_drying_softening_temperature": [ "60" ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature": [ - "255" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pe.json b/resources/profiles/BBL/filament/fdm_filament_pe.json index 9235c3301e..0de7d887a7 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pe.json +++ b/resources/profiles/BBL/filament/fdm_filament_pe.json @@ -1,45 +1,48 @@ { - "type": "filament", - "name": "fdm_filament_pe", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.24" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PE" - ], + "type": "filament", + "name": "fdm_filament_pe", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PE" + ], "filament_dev_chamber_drying_bed_temperature": [ "70" ], @@ -65,49 +68,49 @@ "filament_dev_drying_softening_temperature": [ "50" ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "45" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pet.json b/resources/profiles/BBL/filament/fdm_filament_pet.json index 23a8f73fe4..fe1d01694a 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pet.json +++ b/resources/profiles/BBL/filament/fdm_filament_pet.json @@ -1,36 +1,39 @@ { - "type": "filament", - "name": "fdm_filament_pet", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_min_speed": [ - "20" - ], - "filament_cost": [ - "30" - ], - "filament_density": [ - "1.27" - ], - "filament_max_volumetric_speed": [ - "25" - ], - "filament_type": [ - "PETG" - ], - "filament_adhesiveness_category": [ - "300" - ], + "type": "filament", + "name": "fdm_filament_pet", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "30" + ], + "filament_density": [ + "1.27" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_metal_stickiness": [ + "High" + ], + "filament_type": [ + "PETG" + ], + "filament_adhesiveness_category": [ + "300" + ], "filament_dev_chamber_drying_bed_temperature": [ "80" ], @@ -59,46 +62,46 @@ "filament_dev_drying_softening_temperature": [ "60" ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "nozzle_temperature": [ - "255" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "70" - ], - "supertack_plate_temp_initial_layer": [ - "70" - ], - "temperature_vitrification": [ - "70" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "temperature_vitrification": [ + "70" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pha.json b/resources/profiles/BBL/filament/fdm_filament_pha.json index 2bd348e2de..8edb5389be 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pha.json +++ b/resources/profiles/BBL/filament/fdm_filament_pha.json @@ -1,45 +1,48 @@ { - "type": "filament", - "name": "fdm_filament_pha", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "27.99" - ], - "filament_density": [ - "1.24" - ], - "filament_max_volumetric_speed": [ - "6" - ], - "filament_type": [ - "PHA" - ], + "type": "filament", + "name": "fdm_filament_pha", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "27.99" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "filament_type": [ + "PHA" + ], "filament_dev_chamber_drying_bed_temperature": [ "70" ], @@ -65,49 +68,49 @@ "filament_dev_drying_softening_temperature": [ "50" ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "120" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "120" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pla.json b/resources/profiles/BBL/filament/fdm_filament_pla.json index f1e1c9a244..eb0ee310d1 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pla.json +++ b/resources/profiles/BBL/filament/fdm_filament_pla.json @@ -1,47 +1,50 @@ { - "type": "filament", - "name": "fdm_filament_pla", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.24" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_scarf_gap": [ - "15%" - ], - "filament_adhesiveness_category": [ - "100" + "type": "filament", + "name": "fdm_filament_pla", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_scarf_gap": [ + "15%" + ], + "filament_adhesiveness_category": [ + "100" ], "filament_dev_chamber_drying_bed_temperature": [ "70" @@ -70,47 +73,47 @@ ], "filament_dev_drying_softening_temperature": [ "50" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "impact_strength_z": [ - "10.0" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "45" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "impact_strength_z": [ + "10.0" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pp.json b/resources/profiles/BBL/filament/fdm_filament_pp.json index 2d8c3772ba..ce6b887c8a 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pp.json +++ b/resources/profiles/BBL/filament/fdm_filament_pp.json @@ -1,48 +1,51 @@ { - "type": "filament", - "name": "fdm_filament_pp", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "35" - ], - "cool_plate_temp_initial_layer": [ - "35" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "34.99" - ], - "filament_density": [ - "0.93" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PP" - ], - "filament_adhesiveness_category": [ - "902" - ], + "type": "filament", + "name": "fdm_filament_pp", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "35" + ], + "cool_plate_temp_initial_layer": [ + "35" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "0.93" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PP" + ], + "filament_adhesiveness_category": [ + "902" + ], "filament_dev_chamber_drying_bed_temperature": [ "70" ], @@ -71,55 +74,55 @@ "filament_dev_drying_softening_temperature": [ "55" ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature": [ - "235" - ], - "nozzle_temperature_initial_layer": [ - "235" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "110" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature": [ + "235" + ], + "nozzle_temperature_initial_layer": [ + "235" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "110" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_ppa.json b/resources/profiles/BBL/filament/fdm_filament_ppa.json index 3bba318bc5..f14397aa6e 100644 --- a/resources/profiles/BBL/filament/fdm_filament_ppa.json +++ b/resources/profiles/BBL/filament/fdm_filament_ppa.json @@ -1,51 +1,54 @@ { - "type": "filament", - "name": "fdm_filament_ppa", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "activate_air_filtration": [ - "1" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "100" - ], - "eng_plate_temp_initial_layer": [ - "100" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "10" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.17" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_type": [ - "PPA-CF" - ], - "filament_vendor": [ - "Bambu Lab" - ], + "type": "filament", + "name": "fdm_filament_ppa", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "100" + ], + "eng_plate_temp_initial_layer": [ + "100" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_metal_stickiness": [ + "High" + ], + "filament_type": [ + "PPA-CF" + ], + "filament_vendor": [ + "Bambu Lab" + ], "filament_dev_chamber_drying_bed_temperature": [ "100" ], @@ -55,7 +58,9 @@ "12", "12" ], - "filament_dev_ams_drying_ams_limitations": [], + "filament_dev_ams_drying_ams_limitations": [ + "-1" + ], "filament_dev_chamber_drying_time": [ "18" ], @@ -74,55 +79,55 @@ "filament_dev_drying_softening_temperature": [ "150" ], - "hot_plate_temp": [ - "100" - ], - "hot_plate_temp_initial_layer": [ - "100" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_high": [ - "320" - ], - "nozzle_temperature_range_low": [ - "280" - ], - "overhang_fan_speed": [ - "40" - ], - "overhang_fan_threshold": [ - "0%" - ], - "required_nozzle_HRC": [ - "40" - ], - "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "20" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "210" - ], - "textured_plate_temp": [ - "100" - ], - "textured_plate_temp_initial_layer": [ - "100" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "100" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_high": [ + "320" + ], + "nozzle_temperature_range_low": [ + "280" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "required_nozzle_HRC": [ + "40" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "210" + ], + "textured_plate_temp": [ + "100" + ], + "textured_plate_temp_initial_layer": [ + "100" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pps.json b/resources/profiles/BBL/filament/fdm_filament_pps.json index d1c6a6aed2..6df9a8f8d7 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pps.json +++ b/resources/profiles/BBL/filament/fdm_filament_pps.json @@ -1,48 +1,48 @@ { - "type": "filament", - "name": "fdm_filament_pps", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "chamber_temperatures": [ - "60" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "110" - ], - "eng_plate_temp_initial_layer": [ - "110" - ], - "fan_cooling_layer_time": [ - "5" - ], - "fan_max_speed": [ - "50" - ], - "fan_min_speed": [ - "0" - ], - "filament_density": [ - "1.36" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_max_volumetric_speed": [ - "4" - ], - "filament_type": [ - "PPS" - ], - "filament_adhesiveness_category": [ - "801" - ], + "type": "filament", + "name": "fdm_filament_pps", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "chamber_temperatures": [ + "60" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "0" + ], + "filament_density": [ + "1.36" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "4" + ], + "filament_type": [ + "PPS" + ], + "filament_adhesiveness_category": [ + "801" + ], "filament_dev_chamber_drying_bed_temperature": [ "100" ], @@ -52,7 +52,9 @@ "12", "12" ], - "filament_dev_ams_drying_ams_limitations": [], + "filament_dev_ams_drying_ams_limitations": [ + "-1" + ], "filament_dev_ams_drying_heat_distortion_temperature": [ "165" ], @@ -68,49 +70,49 @@ "filament_dev_drying_softening_temperature": [ "150" ], - "hot_plate_temp": [ - "110" - ], - "hot_plate_temp_initial_layer": [ - "110" - ], - "nozzle_temperature": [ - "320" - ], - "nozzle_temperature_initial_layer": [ - "320" - ], - "nozzle_temperature_range_high": [ - "340" - ], - "nozzle_temperature_range_low": [ - "300" - ], - "overhang_fan_speed": [ - "30" - ], - "overhang_fan_threshold": [ - "0%" - ], - "slow_down_layer_time": [ - "2" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "125" - ], - "textured_plate_temp": [ - "110" - ], - "textured_plate_temp_initial_layer": [ - "110" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "320" + ], + "nozzle_temperature_initial_layer": [ + "320" + ], + "nozzle_temperature_range_high": [ + "340" + ], + "nozzle_temperature_range_low": [ + "300" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "0%" + ], + "slow_down_layer_time": [ + "2" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "125" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_pva.json b/resources/profiles/BBL/filament/fdm_filament_pva.json index 55d83517ce..55801ab222 100644 --- a/resources/profiles/BBL/filament/fdm_filament_pva.json +++ b/resources/profiles/BBL/filament/fdm_filament_pva.json @@ -1,54 +1,57 @@ { - "type": "filament", - "name": "fdm_filament_pva", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "45" - ], - "cool_plate_temp_initial_layer": [ - "45" - ], - "eng_plate_temp": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "0" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.24" - ], - "filament_is_support": [ - "1" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_soluble": [ - "1" - ], - "filament_type": [ - "PVA" - ], - "filament_adhesiveness_category": [ - "704" - ], + "type": "filament", + "name": "fdm_filament_pva", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "eng_plate_temp": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "0" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_is_support": [ + "1" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_soluble": [ + "1" + ], + "filament_type": [ + "PVA" + ], + "filament_adhesiveness_category": [ + "704" + ], "filament_dev_ams_drying_time": [ "12", "18", @@ -70,49 +73,49 @@ "filament_dev_drying_softening_temperature": [ "75" ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "nozzle_temperature": [ - "220" - ], - "nozzle_temperature_initial_layer": [ - "220" - ], - "overhang_fan_threshold": [ - "50%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "35" - ], - "supertack_plate_temp_initial_layer": [ - "35" - ], - "slow_down_layer_time": [ - "4" - ], - "slow_down_min_speed": [ - "50" - ], - "temperature_vitrification": [ - "45" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "220" + ], + "nozzle_temperature_initial_layer": [ + "220" + ], + "overhang_fan_threshold": [ + "50%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "50" + ], + "temperature_vitrification": [ + "45" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_template_direct_bowden.json b/resources/profiles/BBL/filament/fdm_filament_template_direct_bowden.json new file mode 100644 index 0000000000..152b0ade59 --- /dev/null +++ b/resources/profiles/BBL/filament/fdm_filament_template_direct_bowden.json @@ -0,0 +1,228 @@ +{ + "type": "filament", + "name": "fdm_filament_template_direct_bowden", + "from": "system", + "instantiation": "false", + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_cooling_before_tower": [ + "0", + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta":[ + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "10", + "10" + ], + "filament_bridge_speed": [ + "25", + "25", + "25", + "25" + ], + "filament_pre_cooling_temperature": [ + "0", + "0", + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil", + "nil" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1" + ], + "override_process_overhang_speed": [ + "0", + "0", + "0", + "0" + ], + "retraction_distances_when_ec": [ + "10", + "10", + "10", + "10" + ], + "slow_down_min_speed": [ + "10", + "10", + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_template_direct_bowden_e3d.json b/resources/profiles/BBL/filament/fdm_filament_template_direct_bowden_e3d.json new file mode 100644 index 0000000000..dbc34809ab --- /dev/null +++ b/resources/profiles/BBL/filament/fdm_filament_template_direct_bowden_e3d.json @@ -0,0 +1,302 @@ +{ + "type": "filament", + "name": "fdm_filament_template_direct_bowden_e3d", + "from": "system", + "instantiation": "false", + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_cooling_before_tower": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "filament_flush_temp": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_bridge_speed": [ + "25", + "25", + "25", + "25", + "25", + "25" + ], + "filament_pre_cooling_temperature": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14", + "14", + "14", + "14" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1", + "-1", + "-1", + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1", + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil", + "nil", + "nil", + "nil" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "override_process_overhang_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "retraction_distances_when_ec": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "slow_down_min_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_template_direct_dual.json b/resources/profiles/BBL/filament/fdm_filament_template_direct_dual.json new file mode 100644 index 0000000000..45a531cdbb --- /dev/null +++ b/resources/profiles/BBL/filament/fdm_filament_template_direct_dual.json @@ -0,0 +1,162 @@ +{ + "type": "filament", + "name": "fdm_filament_template_direct_dual", + "from": "system", + "instantiation": "false", + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "filament_cooling_before_tower": [ + "0", + "0" + ], + "filament_preheat_temperature_delta":[ + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_enable_overhang_speed": [ + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_temp_fast": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil" + ], + "filament_overhang_1_4_speed": [ + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10" + ], + "filament_bridge_speed": [ + "25", + "25" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "override_process_overhang_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "1", + "1" + ], + "retraction_distances_when_ec": [ + "10", + "10" + ], + "slow_down_min_speed": [ + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/fdm_filament_template_direct_dual_e3d.json b/resources/profiles/BBL/filament/fdm_filament_template_direct_dual_e3d.json new file mode 100644 index 0000000000..814597c4e5 --- /dev/null +++ b/resources/profiles/BBL/filament/fdm_filament_template_direct_dual_e3d.json @@ -0,0 +1,201 @@ +{ + "type": "filament", + "name": "fdm_filament_template_direct_dual_e3d", + "from": "system", + "instantiation": "false", + "filament_adaptive_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_cooling_before_tower": [ + "0", + "0", + "0" + ], + "filament_preheat_temperature_delta":[ + "10", + "10", + "10" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_enable_overhang_speed": [ + "1", + "1", + "1" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "filament_flush_temp": [ + "0", + "0", + "0" + ], + "filament_flush_temp_fast": [ + "0", + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0", + "0" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "filament_overhang_2_4_speed": [ + "50", + "50", + "50" + ], + "filament_overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "filament_overhang_4_4_speed": [ + "10", + "10", + "10" + ], + "filament_overhang_totally_speed": [ + "10", + "10", + "10" + ], + "filament_bridge_speed": [ + "25", + "25", + "25" + ], + "filament_pre_cooling_temperature": [ + "0", + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14", + "14" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "long_retractions_when_ec": [ + "1", + "1", + "1" + ], + "override_process_overhang_speed": [ + "0", + "0", + "0" + ], + "retraction_distances_when_ec": [ + "10", + "10", + "10" + ], + "slow_down_min_speed": [ + "10", + "10", + "10" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/fdm_filament_tpu.json b/resources/profiles/BBL/filament/fdm_filament_tpu.json index d2ef5db84e..6c37a7873d 100644 --- a/resources/profiles/BBL/filament/fdm_filament_tpu.json +++ b/resources/profiles/BBL/filament/fdm_filament_tpu.json @@ -1,51 +1,57 @@ { - "type": "filament", - "name": "fdm_filament_tpu", - "inherits": "fdm_filament_common", - "from": "system", - "instantiation": "false", - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "cool_plate_temp": [ - "30" - ], - "cool_plate_temp_initial_layer": [ - "30" - ], - "eng_plate_temp": [ - "30" - ], - "eng_plate_temp_initial_layer": [ - "30" - ], - "fan_cooling_layer_time": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "filament_cost": [ - "20" - ], - "filament_density": [ - "1.24" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_type": [ - "TPU" - ], - "filament_adhesiveness_category": [ - "600" - ], + "type": "filament", + "name": "fdm_filament_tpu", + "inherits": "fdm_filament_common", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "1" + ], + "cool_plate_temp": [ + "30" + ], + "cool_plate_temp_initial_layer": [ + "30" + ], + "eng_plate_temp": [ + "30" + ], + "eng_plate_temp_initial_layer": [ + "30" + ], + "fan_cooling_layer_time": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "filament_cost": [ + "20" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_metal_stickiness": [ + "High" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_type": [ + "TPU" + ], + "filament_adhesiveness_category": [ + "600" + ], "filament_dev_ams_drying_time": [ "12", "18", @@ -70,46 +76,46 @@ "filament_dev_drying_softening_temperature": [ "50" ], - "hot_plate_temp": [ - "35" - ], - "hot_plate_temp_initial_layer": [ - "35" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "30" - ], - "textured_plate_temp": [ - "35" - ], - "textured_plate_temp_initial_layer": [ - "35" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ] -} + "hot_plate_temp": [ + "35" + ], + "hot_plate_temp_initial_layer": [ + "35" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "30" + ], + "textured_plate_temp": [ + "35" + ], + "textured_plate_temp_initial_layer": [ + "35" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/filament_id_map.json b/resources/profiles/BBL/filament/filament_id_map.json new file mode 100644 index 0000000000..3e7f151a18 --- /dev/null +++ b/resources/profiles/BBL/filament/filament_id_map.json @@ -0,0 +1,242 @@ +{ + "type": "filament", + "GM004": { + "GFSN05_02": "GFSN05_13", + "GFSN04": "GFSN04_12", + "GFSN06_00": "GFSN06_10" + }, + "GM007": { + "GFSG96_00": "GFSG96_27" + }, + "GM003": { + "GFSG96_00": "GFSG96_27" + }, + "GM005": { + "GFSB00": "GFSB00_40", + "GFSN05_02": "GFSN05_13", + "GFSN04": "GFSN04_12", + "GFSG02_02": "GFSG02_37", + "GFSG01_01": "GFSG01_30", + "GFSA00": "GFSA00_33", + "GFSA13_00": "GFSA13_28", + "GFSA15_00": "GFSA15_28", + "GFSA12_00": "GFSA12_30", + "GFSA18_00": "GFSA18_31", + "GFSA07_00": "GFSA07_15", + "GFSA01": "GFSA01_33", + "GFSA02": "GFSA02_28", + "GFSA06_00": "GFSA06_27", + "GFSA08_00": "GFSA08_16", + "GFSA10_32": "GFSA10_37", + "GFSA16_00": "GFSA16_20", + "GFSN06_00": "GFSN06_10", + "GFSU02_00": "GFSU02_13" + }, + "GM006": { + "GFSG96_00": "GFSG96_27" + }, + "GM014": { + "GFSB00": "GFSB00_38", + "GFSG02_00": "GFSG02_36", + "GFSA00": "GFSA00_34", + "GFSA01": "GFSA01_34", + "GFSA06_00": "GFSA06_29", + "GFSG96_00": "GFSG96_26" + }, + "GM016": { + "GFSB00": "GFSB00_39", + "GFSA00": "GFSA00_35", + "GFSA01": "GFSA01_35", + "GFSA06_00": "GFSA06_28", + "GFSG96_00": "GFSG96_25" + }, + "GM012": { + "GFSN04_10": "GFSN04_15", + "GFSA07_10": "GFSA07_18" + }, + "GM011": { + "GFSA13_03": "GFSA13_31", + "GFSA15_03": "GFSA15_31", + "GFSA12_02": "GFSA12_33", + "GFSA18_03": "GFSA18_34", + "GFSA06_03": "GFSA06_30", + "GFSA16_03": "GFSA16_23", + "GFSU02_01": "GFSU02_16", + "GFSB00_03": "GFSB00_41", + "GFSN04_10": "GFSN04_15", + "GFSC00_04": "GFSC00_42", + "GFSA04_10": "GFSA04_11", + "GFSA07_10": "GFSA07_18", + "GFSA05_10": "GFSA05_28", + "GFSA02_10": "GFSA02_29", + "GFSA08_10": "GFSA08_19", + "GFSA10_34": "GFSA10_38" + }, + "GM013": { + "GFSG02_00": "GFSG02_35" + }, + "GM033": { + "GFSU00_08": "GFSU00_20", + "GFSU00_11": "GFSU00_21" + }, + "GM035": { + "GFSU03_02": "GFSU03_24", + "GFSN05_04": "GFSN05_19", + "GFSN04_01": "GFSN04_21", + "GFSA18_09": "GFSA18_45", + "GFSA19_12": "GFSA19_44", + "GFSA06_09": "GFSA06_41", + "GFSA17_13": "GFSA17_45", + "GFSS04_10": "GFSS04_29", + "GFSS02_07": "GFSS02_35", + "GFSS05_08": "GFSS05_32", + "GFSS06_02": "GFSS06_15", + "GFSU02_04": "GFSU02_26" + }, + "GM036": { + "GFSU03_02": "GFSU03_26", + "GFSN05_04": "GFSN05_20", + "GFSN04_01": "GFSN04_22", + "GFSG00_16": "GFSG00_45", + "GFSG01_11": "GFSG01_41", + "GFSG50_07": "GFSG50_31", + "GFSA06_09": "GFSA06_42", + "GFSA50_06": "GFSA50_27", + "GFSS04_10": "GFSS04_30", + "GFSS02_07": "GFSS02_36", + "GFSS05_08": "GFSS05_33", + "GFSS06_02": "GFSS06_16", + "GFSU00_08": "GFSU00_27", + "GFSU02_04": "GFSU02_27" + }, + "GM053": { + "GFSU03_03": "GFSU03_25", + "GFSN05_06": "GFSN05_21", + "GFSN04_03": "GFSN04_23", + "GFSA19_15": "GFSA19_45", + "GFSA06_13": "GFSA06_43", + "GFSA17_32": "GFSA17_46", + "GFSS04_14": "GFSS04_31", + "GFSS02_18": "GFSS02_37", + "GFSS05_12": "GFSS05_39", + "GFSS06_04": "GFSS06_17", + "GFSU02_06": "GFSU02_28" + }, + "GM054": { + "GFSU03_03": "GFSU03_27", + "GFSN05_06": "GFSN05_22", + "GFSN04_03": "GFSN04_24", + "GFSG00_21": "GFSG00_46", + "GFSG01_17": "GFSG01_42", + "GFSG50_14": "GFSG50_32", + "GFSA06_13": "GFSA06_44", + "GFSA50_13": "GFSA50_28", + "GFSS04_14": "GFSS04_32", + "GFSS02_18": "GFSS02_38", + "GFSS05_12": "GFSS05_40", + "GFSS06_04": "GFSS06_18", + "GFSU00_11": "GFSU00_28", + "GFSU02_06": "GFSU02_29" + }, + "GM048": { + "GFSB01_20": "GFSB01_50", + "GFSN05_07": "GFSN05_27", + "GFSN04_05": "GFSN04_29", + "GFSG00_22": "GFSG00_49", + "GFSG02_22": "GFSG02_51", + "GFSA18_13": "GFSA18_48", + "GFSA01_11": "GFSA01_49", + "GFSA06_16": "GFSA06_47", + "GFSA10_18": "GFSA10_52", + "GFSA50_15": "GFSA50_31", + "GFSS04_09": "GFSS04_35", + "GFSS02_19": "GFSS02_43", + "GFSS05_15": "GFSS05_38", + "GFSS06_06": "GFSS06_23", + "GFSU00_12": "GFSU00_33", + "GFSU02_08": "GFSU02_32", + "GFSA00_09": "GFSA00_55" + }, + "GM044": { + "GFSN05_09": "GFSN05_18", + "GFSN04_07": "GFSN04_20", + "GFSG00_25": "GFSG00_44", + "GFSG01_23": "GFSG01_40", + "GFSG50_18": "GFSG50_30", + "GFSA18_16": "GFSA18_44", + "GFSA19_10": "GFSA19_43", + "GFSA06_19": "GFSA06_40", + "GFSA17_29": "GFSA17_44", + "GFSA50_17": "GFSA50_26", + "GFSS04_18": "GFSS04_28", + "GFSS02_22": "GFSS02_34", + "GFSS05_18": "GFSS05_31", + "GFSS06_08": "GFSS06_14", + "GFSU00_14": "GFSU00_26", + "GFSU02_10": "GFSU02_25" + }, + "GM039": { + "GFSN05_10": "GFSN05_23", + "GFSN04_08": "GFSN04_25", + "GFSG01_08": "GFSG01_44", + "GFSG50_09": "GFSG50_34", + "GFSA18_18": "GFSA18_46", + "GFSA19_18": "GFSA19_46", + "GFSA06_21": "GFSA06_45", + "GFSA17_15": "GFSA17_47", + "GFSA50_07": "GFSA50_29", + "GFSS04_20": "GFSS04_36", + "GFSS02_08": "GFSS02_39", + "GFSS05_20": "GFSS05_34", + "GFSS06_09": "GFSS06_19", + "GFSU00_09": "GFSU00_29", + "GFSU02_11": "GFSU02_24" + }, + "GM040": { + "GFSN05_10": "GFSN05_24", + "GFSN04_08": "GFSN04_26", + "GFSG00_32": "GFSG00_47", + "GFSG01_08": "GFSG01_45", + "GFSG50_09": "GFSG50_35", + "GFSA18_18": "GFSA18_47", + "GFSA19_18": "GFSA19_47", + "GFSA06_21": "GFSA06_46", + "GFSA17_15": "GFSA17_48", + "GFSA50_07": "GFSA50_30", + "GFSS04_20": "GFSS04_37", + "GFSS02_08": "GFSS02_40", + "GFSS05_20": "GFSS05_35", + "GFSS06_09": "GFSS06_20", + "GFSU00_09": "GFSU00_30", + "GFSU02_11": "GFSU02_23" + }, + "GM009": { + "GFSN05_05": "GFSN05_25", + "GFSN04_02": "GFSN04_27", + "GFSS04_12": "GFSS04_33", + "GFSS02_16": "GFSS02_41", + "GFSS05_10": "GFSS05_36", + "GFSS06_03": "GFSS06_21", + "GFSU00_10": "GFSU00_31", + "GFSU02_05": "GFSU02_30" + }, + "GM018": { + "GFSN05_05": "GFSN05_26", + "GFSN04_02": "GFSN04_28", + "GFSG00_18": "GFSG00_48", + "GFSG02_18": "GFSG02_50", + "GFSG01_14": "GFSG01_43", + "GFSG50_12": "GFSG50_33", + "GFSA50_09": "GFSA50_32", + "GFSS04_12": "GFSS04_34", + "GFSS02_16": "GFSS02_42", + "GFSS05_10": "GFSS05_37", + "GFSS06_03": "GFSS06_22", + "GFSU00_10": "GFSU00_32", + "GFSU02_05": "GFSU02_31" + }, + "GM043": { + "GFSA19_10": "GFSA19_42", + "GFSA17_29": "GFSA17_43" + } +} diff --git a/resources/profiles/BBL/filament/filament_name_map.json b/resources/profiles/BBL/filament/filament_name_map.json new file mode 100644 index 0000000000..dc7168b749 --- /dev/null +++ b/resources/profiles/BBL/filament/filament_name_map.json @@ -0,0 +1,245 @@ +{ + "type": "filament", + "Bambu Lab X1 Carbon 0.8 nozzle": { + "Bambu PA6-CF @BBL X1C": "Bambu PA6-CF @BBL X1C 0.6 nozzle", + "Bambu PAHT-CF @BBL X1C": "Bambu PAHT-CF @BBL X1C 0.6 nozzle", + "Bambu PPA-CF @BBL X1C": "Bambu PPA-CF @BBL X1C 0.6 nozzle" + }, + "Bambu Lab X1 0.8 nozzle": { + "Generic PETG HF @BBL X1C": "Generic PETG HF @BBL X1 0.6 nozzle" + }, + "Bambu Lab X1 0.4 nozzle": { + "Generic PETG HF @BBL X1C": "Generic PETG HF @BBL X1 0.6 nozzle" + }, + "Bambu Lab X1 Carbon 0.6 nozzle": { + "Bambu ABS @BBL X1C": "Bambu ABS @BBL X1C 0.6 nozzle", + "Bambu PA6-CF @BBL X1C": "Bambu PA6-CF @BBL X1C 0.6 nozzle", + "Bambu PAHT-CF @BBL X1C": "Bambu PAHT-CF @BBL X1C 0.6 nozzle", + "Bambu PETG HF @BBL X1C 0.8 nozzle": "Bambu PETG HF @BBL X1C 0.6 nozzle", + "Bambu PETG Translucent @BBL X1C 0.8 nozzle": "Bambu PETG Translucent @BBL X1C 0.6 nozzle", + "Bambu PLA Basic @BBL X1C": "Bambu PLA Basic @BBL X1C 0.6 nozzle", + "Bambu PLA Dynamic @BBL X1C": "Bambu PLA Dynamic @BBL X1C 0.6 nozzle", + "Bambu PLA Galaxy @BBL X1C": "Bambu PLA Galaxy @BBL X1C 0.6 nozzle", + "Bambu PLA Glow @BBL X1C": "Bambu PLA Glow @BBL X1C 0.6 nozzle", + "Bambu PLA Lite @BBL X1C": "Bambu PLA Lite @BBL X1C 0.6 nozzle", + "Bambu PLA Marble @BBL X1C": "Bambu PLA Marble @BBL X1C 0.6 nozzle", + "Bambu PLA Matte @BBL X1C": "Bambu PLA Matte @BBL X1C 0.6 nozzle", + "Bambu PLA Metal @BBL X1C": "Bambu PLA Metal @BBL X1C 0.6 nozzle", + "Bambu PLA Silk+ @BBL X1C": "Bambu PLA Silk+ @BBL X1C 0.6 nozzle", + "Bambu PLA Sparkle @BBL X1C": "Bambu PLA Sparkle @BBL X1C 0.6 nozzle", + "Bambu PLA Tough+ @BBL X1C": "Bambu PLA Tough+ @BBL X1C 0.6 nozzle", + "Bambu PLA Wood @BBL X1C": "Bambu PLA Wood @BBL X1C 0.6 nozzle", + "Bambu PPA-CF @BBL X1C": "Bambu PPA-CF @BBL X1C 0.6 nozzle", + "Bambu TPU for AMS @BBL X1C": "Bambu TPU for AMS @BBL X1C 0.6 nozzle" + }, + "Bambu Lab X1 0.6 nozzle": { + "Generic PETG HF @BBL X1C": "Generic PETG HF @BBL X1 0.6 nozzle" + }, + "Bambu Lab P1S 0.4 nozzle": { + "Bambu ABS @BBL X1C": "Bambu ABS @BBL P1S 0.4 nozzle", + "Bambu PETG HF @BBL X1C": "Bambu PETG HF @BBL P1S 0.4 nozzle", + "Bambu PLA Basic @BBL X1C": "Bambu PLA Basic @BBL P1S 0.4 nozzle", + "Bambu PLA Matte @BBL X1C": "Bambu PLA Matte @BBL P1S 0.4 nozzle", + "Bambu PLA Silk+ @BBL X1C": "Bambu PLA Silk+ @BBL P1S 0.4 nozzle", + "Generic PETG HF @BBL X1C": "Generic PETG HF @BBL P1S 0.4 nozzle" + }, + "Bambu Lab P1S 0.6 nozzle": { + "Bambu ABS @BBL X1C": "Bambu ABS @BBL P1S 0.6 nozzle", + "Bambu PLA Basic @BBL X1C": "Bambu PLA Basic @BBL P1S 0.6 nozzle", + "Bambu PLA Matte @BBL X1C": "Bambu PLA Matte @BBL P1S 0.6 nozzle", + "Bambu PLA Silk+ @BBL X1C": "Bambu PLA Silk+ @BBL P1S 0.6 nozzle", + "Generic PETG HF @BBL X1C": "Generic PETG HF @BBL P1S 0.6 nozzle" + }, + "Bambu Lab P1P 0.8 nozzle": { + "Bambu PAHT-CF @BBL P1P": "Bambu PAHT-CF @BBL P1P 0.6 nozzle", + "Bambu PLA Marble @BBL P1P": "Bambu PLA Marble @BBL P1P 0.6 nozzle" + }, + "Bambu Lab P1P 0.6 nozzle": { + "Bambu PLA Dynamic @BBL P1P": "Bambu PLA Dynamic @BBL P1P 0.6 nozzle", + "Bambu PLA Galaxy @BBL P1P": "Bambu PLA Galaxy @BBL P1P 0.6 nozzle", + "Bambu PLA Glow @BBL P1P": "Bambu PLA Glow @BBL P1P 0.6 nozzle", + "Bambu PLA Lite @BBL P1P": "Bambu PLA Lite @BBL P1P 0.6 nozzle", + "Bambu PLA Silk+ @BBL P1P": "Bambu PLA Silk+ @BBL P1P 0.6 nozzle", + "Bambu PLA Wood @BBL P1P": "Bambu PLA Wood @BBL P1P 0.6 nozzle", + "Bambu TPU for AMS @BBL P1P": "Bambu TPU for AMS @BBL P1P 0.6 nozzle", + "Bambu ABS @BBL P1P": "Bambu ABS @BBL P1P 0.6 nozzle", + "Bambu PAHT-CF @BBL P1P": "Bambu PAHT-CF @BBL P1P 0.6 nozzle", + "Bambu PC @BBL P1P": "Bambu PC @BBL P1P 0.6 nozzle", + "Bambu PLA Basic @BBL P1P": "Bambu PLA Basic @BBL P1P 0.6 nozzle", + "Bambu PLA Marble @BBL P1P": "Bambu PLA Marble @BBL P1P 0.6 nozzle", + "Bambu PLA Matte @BBL P1P": "Bambu PLA Matte @BBL P1P 0.6 nozzle", + "Bambu PLA Metal @BBL P1P": "Bambu PLA Metal @BBL P1P 0.6 nozzle", + "Bambu PLA Sparkle @BBL P1P": "Bambu PLA Sparkle @BBL P1P 0.6 nozzle", + "Bambu PLA Tough+ @BBL P1P": "Bambu PLA Tough+ @BBL P1P 0.6 nozzle" + }, + "Bambu Lab P1P 0.4 nozzle": { + "Bambu PETG HF @BBL X1C": "Bambu PETG HF @BBL P1P 0.4 nozzle" + }, + "Bambu Lab H2D 0.4 nozzle": { + "Bambu TPU 95A HF @BBL H2D": "Bambu TPU 95A HF @BBL H2D 0.4 nozzle", + "Bambu TPU 95A HF @BBL H2DP": "Bambu TPU 95A HF @BBL H2DP 0.4 nozzle" + }, + "Bambu Lab H2D 0.6 nozzle": { + "Bambu TPU 90A @BBL H2D": "Bambu TPU 90A @BBL H2D 0.6 nozzle", + "Bambu PA6-CF @BBL H2D": "Bambu PA6-CF @BBL H2D 0.6 nozzle", + "Bambu PAHT-CF @BBL H2D": "Bambu PAHT-CF @BBL H2D 0.6 nozzle", + "Bambu PLA Lite @BBL H2D": "Bambu PLA Lite @BBL H2D 0.6 nozzle", + "Bambu PLA Pure @BBL H2D 0.8 nozzle": "Bambu PLA Pure @BBL H2D 0.6 nozzle", + "Bambu PLA Silk+ @BBL H2D": "Bambu PLA Silk+ @BBL H2D 0.6 nozzle", + "Bambu PLA Translucent @BBL H2D 0.8 nozzle": "Bambu PLA Translucent @BBL H2D 0.6 nozzle", + "Bambu PVA @BBL H2D": "Bambu PVA @BBL H2D 0.6 nozzle", + "Bambu Support For PLA @BBL H2D": "Bambu Support For PLA @BBL H2D 0.6 nozzle", + "Bambu Support For PLA/PETG @BBL H2D": "Bambu Support For PLA/PETG @BBL H2D 0.6 nozzle", + "Bambu Support for ABS @BBL H2D": "Bambu Support for ABS @BBL H2D 0.6 nozzle", + "Bambu TPU for AMS @BBL H2D": "Bambu TPU for AMS @BBL H2D 0.6 nozzle" + }, + "Bambu Lab H2D 0.8 nozzle": { + "Bambu TPU 90A @BBL H2D": "Bambu TPU 90A @BBL H2D 0.8 nozzle", + "Bambu PA6-CF @BBL H2D": "Bambu PA6-CF @BBL H2D 0.8 nozzle", + "Bambu PAHT-CF @BBL H2D": "Bambu PAHT-CF @BBL H2D 0.8 nozzle", + "Bambu PETG Basic @BBL H2D 0.6 nozzle": "Bambu PETG Basic @BBL H2D 0.8 nozzle", + "Bambu PETG Translucent @BBL H2D 0.6 nozzle": "Bambu PETG Translucent @BBL H2D 0.8 nozzle", + "Bambu PETG-CF @BBL H2D 0.6 nozzle": "Bambu PETG-CF @BBL H2D 0.8 nozzle", + "Bambu PLA Silk+ @BBL H2D": "Bambu PLA Silk+ @BBL H2D 0.8 nozzle", + "Bambu PLA-CF @BBL H2D 0.6 nozzle": "Bambu PLA-CF @BBL H2D 0.8 nozzle", + "Bambu PVA @BBL H2D": "Bambu PVA @BBL H2D 0.8 nozzle", + "Bambu Support For PLA @BBL H2D": "Bambu Support For PLA @BBL H2D 0.8 nozzle", + "Bambu Support For PLA/PETG @BBL H2D": "Bambu Support For PLA/PETG @BBL H2D 0.8 nozzle", + "Bambu Support for ABS @BBL H2D": "Bambu Support for ABS @BBL H2D 0.8 nozzle", + "Bambu TPU 95A HF @BBL H2D": "Bambu TPU 95A HF @BBL H2D 0.8 nozzle", + "Bambu TPU for AMS @BBL H2D": "Bambu TPU for AMS @BBL H2D 0.8 nozzle" + }, + "Bambu Lab H2D Pro 0.6 nozzle": { + "Bambu TPU 90A @BBL H2DP": "Bambu TPU 90A @BBL H2DP 0.6 nozzle", + "Bambu PA6-CF @BBL H2DP": "Bambu PA6-CF @BBL H2DP 0.6 nozzle", + "Bambu PAHT-CF @BBL H2DP": "Bambu PAHT-CF @BBL H2DP 0.6 nozzle", + "Bambu PLA Pure @BBL H2DP 0.8 nozzle": "Bambu PLA Pure @BBL H2DP 0.6 nozzle", + "Bambu PLA Silk+ @BBL H2DP": "Bambu PLA Silk+ @BBL H2DP 0.6 nozzle", + "Bambu PLA Translucent @BBL H2DP 0.8 nozzle": "Bambu PLA Translucent @BBL H2DP 0.6 nozzle", + "Bambu PVA @BBL H2DP": "Bambu PVA @BBL H2DP 0.6 nozzle", + "Bambu Support For PLA @BBL H2DP": "Bambu Support For PLA @BBL H2DP 0.6 nozzle", + "Bambu Support For PLA/PETG @BBL H2DP": "Bambu Support For PLA/PETG @BBL H2DP 0.6 nozzle", + "Bambu Support for ABS @BBL H2DP": "Bambu Support for ABS @BBL H2DP 0.6 nozzle", + "Bambu TPU for AMS @BBL H2DP": "Bambu TPU for AMS @BBL H2DP 0.6 nozzle" + }, + "Bambu Lab H2D Pro 0.8 nozzle": { + "Bambu TPU 90A @BBL H2DP": "Bambu TPU 90A @BBL H2DP 0.8 nozzle", + "Bambu PA6-CF @BBL H2DP": "Bambu PA6-CF @BBL H2DP 0.8 nozzle", + "Bambu PAHT-CF @BBL H2DP": "Bambu PAHT-CF @BBL H2DP 0.8 nozzle", + "Bambu PETG Basic @BBL H2DP 0.6 nozzle": "Bambu PETG Basic @BBL H2DP 0.8 nozzle", + "Bambu PETG Translucent @BBL H2DP 0.6 nozzle": "Bambu PETG Translucent @BBL H2DP 0.8 nozzle", + "Bambu PETG-CF @BBL H2DP 0.6 nozzle": "Bambu PETG-CF @BBL H2DP 0.8 nozzle", + "Bambu PLA Silk+ @BBL H2DP": "Bambu PLA Silk+ @BBL H2DP 0.8 nozzle", + "Bambu PLA-CF @BBL H2DP 0.6 nozzle": "Bambu PLA-CF @BBL H2DP 0.8 nozzle", + "Bambu PVA @BBL H2DP": "Bambu PVA @BBL H2DP 0.8 nozzle", + "Bambu Support For PLA @BBL H2DP": "Bambu Support For PLA @BBL H2DP 0.8 nozzle", + "Bambu Support For PLA/PETG @BBL H2DP": "Bambu Support For PLA/PETG @BBL H2DP 0.8 nozzle", + "Bambu Support for ABS @BBL H2DP": "Bambu Support for ABS @BBL H2DP 0.8 nozzle", + "Bambu TPU 95A HF @BBL H2DP": "Bambu TPU 95A HF @BBL H2DP 0.8 nozzle", + "Bambu TPU for AMS @BBL H2DP": "Bambu TPU for AMS @BBL H2DP 0.8 nozzle" + }, + "Bambu Lab X2D 0.8 nozzle": { + "Bambu ASA @BBL X2D": "Bambu ASA @BBL X2D 0.8 nozzle", + "Bambu PA6-CF @BBL X2D": "Bambu PA6-CF @BBL X2D 0.8 nozzle", + "Bambu PAHT-CF @BBL X2D": "Bambu PAHT-CF @BBL X2D 0.8 nozzle", + "Bambu PETG Basic @BBL X2D": "Bambu PETG Basic @BBL X2D 0.8 nozzle", + "Bambu PETG HF @BBL X2D": "Bambu PETG HF @BBL X2D 0.8 nozzle", + "Bambu PLA Basic @BBL X2D": "Bambu PLA Basic @BBL X2D 0.8 nozzle", + "Bambu PLA Lite @BBL X2D": "Bambu PLA Lite @BBL X2D 0.8 nozzle", + "Bambu PLA Matte @BBL X2D": "Bambu PLA Matte @BBL X2D 0.8 nozzle", + "Bambu PLA Silk+ @BBL X2D": "Bambu PLA Silk+ @BBL X2D 0.8 nozzle", + "Bambu PLA Tough+ @BBL X2D": "Bambu PLA Tough+ @BBL X2D 0.8 nozzle", + "Bambu PLA-CF @BBL X2D": "Bambu PLA-CF @BBL X2D 0.8 nozzle", + "Bambu PVA @BBL X2D": "Bambu PVA @BBL X2D 0.8 nozzle", + "Bambu Support For PLA @BBL X2D": "Bambu Support For PLA @BBL X2D 0.8 nozzle", + "Bambu Support For PLA/PETG @BBL X2D": "Bambu Support For PLA/PETG @BBL X2D 0.8 nozzle", + "Bambu Support for ABS @BBL X2D": "Bambu Support for ABS @BBL X2D 0.8 nozzle", + "Bambu TPU 95A HF @BBL X2D": "Bambu TPU 95A HF @BBL X2D 0.8 nozzle", + "Bambu TPU for AMS @BBL X2D": "Bambu TPU for AMS @BBL X2D 0.8 nozzle" + }, + "Bambu Lab H2C 0.8 nozzle": { + "Bambu PA6-CF @BBL H2C": "Bambu PA6-CF @BBL H2C 0.8 nozzle", + "Bambu PAHT-CF @BBL H2C": "Bambu PAHT-CF @BBL H2C 0.8 nozzle", + "Bambu PETG Basic @BBL H2C": "Bambu PETG Basic @BBL H2C 0.8 nozzle", + "Bambu PETG Translucent @BBL H2C": "Bambu PETG Translucent @BBL H2C 0.8 nozzle", + "Bambu PETG-CF @BBL H2C": "Bambu PETG-CF @BBL H2C 0.8 nozzle", + "Bambu PLA Lite @BBL H2C": "Bambu PLA Lite @BBL H2C 0.8 nozzle", + "Bambu PLA Pure @BBL H2C": "Bambu PLA Pure @BBL H2C 0.8 nozzle", + "Bambu PLA Silk+ @BBL H2C": "Bambu PLA Silk+ @BBL H2C 0.8 nozzle", + "Bambu PLA Translucent @BBL H2C": "Bambu PLA Translucent @BBL H2C 0.8 nozzle", + "Bambu PLA-CF @BBL H2C": "Bambu PLA-CF @BBL H2C 0.8 nozzle", + "Bambu PVA @BBL H2C": "Bambu PVA @BBL H2C 0.8 nozzle", + "Bambu Support For PLA @BBL H2C": "Bambu Support For PLA @BBL H2C 0.8 nozzle", + "Bambu Support For PLA/PETG @BBL H2C": "Bambu Support For PLA/PETG @BBL H2C 0.8 nozzle", + "Bambu Support for ABS @BBL H2C": "Bambu Support for ABS @BBL H2C 0.8 nozzle", + "Bambu TPU 95A HF @BBL H2C": "Bambu TPU 95A HF @BBL H2C 0.8 nozzle", + "Bambu TPU for AMS @BBL H2C": "Bambu TPU for AMS @BBL H2C 0.8 nozzle" + }, + "Bambu Lab H2S 0.6 nozzle": { + "Bambu PA6-CF @BBL H2S": "Bambu PA6-CF @BBL H2S 0.6 nozzle", + "Bambu PAHT-CF @BBL H2S": "Bambu PAHT-CF @BBL H2S 0.6 nozzle", + "Bambu PETG Translucent @BBL H2S": "Bambu PETG Translucent @BBL H2S 0.6 nozzle", + "Bambu PETG-CF @BBL H2S": "Bambu PETG-CF @BBL H2S 0.6 nozzle", + "Bambu PLA Lite @BBL H2S": "Bambu PLA Lite @BBL H2S 0.6 nozzle", + "Bambu PLA Pure @BBL H2S": "Bambu PLA Pure @BBL H2S 0.6 nozzle", + "Bambu PLA Silk+ @BBL H2S": "Bambu PLA Silk+ @BBL H2S 0.6 nozzle", + "Bambu PLA Translucent @BBL H2S": "Bambu PLA Translucent @BBL H2S 0.6 nozzle", + "Bambu PLA-CF @BBL H2S": "Bambu PLA-CF @BBL H2S 0.6 nozzle", + "Bambu PVA @BBL H2S": "Bambu PVA @BBL H2S 0.6 nozzle", + "Bambu Support For PLA @BBL H2S": "Bambu Support For PLA @BBL H2S 0.6 nozzle", + "Bambu Support For PLA/PETG @BBL H2S": "Bambu Support For PLA/PETG @BBL H2S 0.6 nozzle", + "Bambu Support for ABS @BBL H2S": "Bambu Support for ABS @BBL H2S 0.6 nozzle", + "Bambu TPU 95A HF @BBL H2S": "Bambu TPU 95A HF @BBL H2S 0.6 nozzle", + "Bambu TPU for AMS @BBL H2S": "Bambu TPU for AMS @BBL H2S 0.6 nozzle" + }, + "Bambu Lab H2S 0.8 nozzle": { + "Bambu PA6-CF @BBL H2S": "Bambu PA6-CF @BBL H2S 0.8 nozzle", + "Bambu PAHT-CF @BBL H2S": "Bambu PAHT-CF @BBL H2S 0.8 nozzle", + "Bambu PETG Basic @BBL H2S 0.6 nozzle": "Bambu PETG Basic @BBL H2S 0.8 nozzle", + "Bambu PETG Translucent @BBL H2S": "Bambu PETG Translucent @BBL H2S 0.8 nozzle", + "Bambu PETG-CF @BBL H2S": "Bambu PETG-CF @BBL H2S 0.8 nozzle", + "Bambu PLA Lite @BBL H2S": "Bambu PLA Lite @BBL H2S 0.8 nozzle", + "Bambu PLA Pure @BBL H2S": "Bambu PLA Pure @BBL H2S 0.8 nozzle", + "Bambu PLA Silk+ @BBL H2S": "Bambu PLA Silk+ @BBL H2S 0.8 nozzle", + "Bambu PLA Translucent @BBL H2S": "Bambu PLA Translucent @BBL H2S 0.8 nozzle", + "Bambu PLA-CF @BBL H2S": "Bambu PLA-CF @BBL H2S 0.8 nozzle", + "Bambu PVA @BBL H2S": "Bambu PVA @BBL H2S 0.8 nozzle", + "Bambu Support For PLA @BBL H2S": "Bambu Support For PLA @BBL H2S 0.8 nozzle", + "Bambu Support For PLA/PETG @BBL H2S": "Bambu Support For PLA/PETG @BBL H2S 0.8 nozzle", + "Bambu Support for ABS @BBL H2S": "Bambu Support for ABS @BBL H2S 0.8 nozzle", + "Bambu TPU 95A HF @BBL H2S": "Bambu TPU 95A HF @BBL H2S 0.8 nozzle", + "Bambu TPU for AMS @BBL H2S": "Bambu TPU for AMS @BBL H2S 0.8 nozzle" + }, + "Bambu Lab P2S 0.6 nozzle": { + "Bambu PA6-CF @BBL P2S": "Bambu PA6-CF @BBL P2S 0.6 nozzle", + "Bambu PAHT-CF @BBL P2S": "Bambu PAHT-CF @BBL P2S 0.6 nozzle", + "Bambu PVA @BBL P2S": "Bambu PVA @BBL P2S 0.6 nozzle", + "Bambu Support For PLA @BBL P2S": "Bambu Support For PLA @BBL P2S 0.6 nozzle", + "Bambu Support For PLA/PETG @BBL P2S": "Bambu Support For PLA/PETG @BBL P2S 0.6 nozzle", + "Bambu Support for ABS @BBL P2S": "Bambu Support for ABS @BBL P2S 0.6 nozzle", + "Bambu TPU 95A HF @BBL P2S": "Bambu TPU 95A HF @BBL P2S 0.6 nozzle", + "Bambu TPU for AMS @BBL P2S": "Bambu TPU for AMS @BBL P2S 0.6 nozzle" + }, + "Bambu Lab P2S 0.8 nozzle": { + "Bambu PA6-CF @BBL P2S": "Bambu PA6-CF @BBL P2S 0.8 nozzle", + "Bambu PAHT-CF @BBL P2S": "Bambu PAHT-CF @BBL P2S 0.8 nozzle", + "Bambu PETG Basic @BBL P2S 0.6 nozzle": "Bambu PETG Basic @BBL P2S 0.8 nozzle", + "Bambu PETG HF @BBL P2S 0.6 nozzle": "Bambu PETG HF @BBL P2S 0.8 nozzle", + "Bambu PETG Translucent @BBL P2S 0.6 nozzle": "Bambu PETG Translucent @BBL P2S 0.8 nozzle", + "Bambu PETG-CF @BBL P2S 0.6 nozzle": "Bambu PETG-CF @BBL P2S 0.8 nozzle", + "Bambu PLA-CF @BBL P2S 0.6 nozzle": "Bambu PLA-CF @BBL P2S 0.8 nozzle", + "Bambu PVA @BBL P2S": "Bambu PVA @BBL P2S 0.8 nozzle", + "Bambu Support For PLA @BBL P2S": "Bambu Support For PLA @BBL P2S 0.8 nozzle", + "Bambu Support For PLA/PETG @BBL P2S": "Bambu Support For PLA/PETG @BBL P2S 0.8 nozzle", + "Bambu Support for ABS @BBL P2S": "Bambu Support for ABS @BBL P2S 0.8 nozzle", + "Bambu TPU 95A HF @BBL P2S": "Bambu TPU 95A HF @BBL P2S 0.8 nozzle", + "Bambu TPU for AMS @BBL P2S": "Bambu TPU for AMS @BBL P2S 0.8 nozzle" + }, + "Bambu Lab X2D 0.6 nozzle": { + "Bambu PLA Basic @BBL X2D": "Bambu PLA Basic @BBL X2D 0.6 nozzle" + }, + "Bambu Lab H2C 0.6 nozzle": { + "Bambu PLA Pure @BBL H2C": "Bambu PLA Pure @BBL H2C 0.6 nozzle", + "Bambu PLA Translucent @BBL H2C": "Bambu PLA Translucent @BBL H2C 0.6 nozzle" + } +} diff --git a/resources/profiles/BBL/filament/filaments_color_codes.json b/resources/profiles/BBL/filament/filaments_color_codes.json index 5c4cfa7570..f236cab20b 100644 --- a/resources/profiles/BBL/filament/filaments_color_codes.json +++ b/resources/profiles/BBL/filament/filaments_color_codes.json @@ -1,7081 +1,7659 @@ { - "data": [ - { - "fila_color_code": "10300", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Orange", - "sv": "Orange", - "pt": "Laranja", - "ko": "오렌지", - "ja": "オレンジ", - "en": "Orange", - "ru": "Оранжевый", - "it": "Arancione", - "fr": "Orange", - "hu": "Narancssárga", - "zh": "橙色", - "nl": "Oranje", - "es": "Naranja" - }, - "fila_color": [ - "#FF6A13FF" - ] - }, - { - "fila_color_code": "10301", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Kürbis-Orange", - "sv": "Pumpaorange", - "pt": "Abóbora Laranja", - "ko": "펌프킨 오렌지", - "ja": "パンプキン オレンジ", - "en": "Pumpkin Orange", - "ru": "Тыквенно-оранжевый", - "it": "Arancione zucca", - "fr": "Orange citrouille", - "hu": "Sütőtök", - "zh": "南瓜橙", - "nl": "Pompoenoranje", - "es": "Naranja calabaza" - }, - "fila_color": [ - "#FF9016FF" - ] - }, - { - "fila_color_code": "10602", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Blau-Grau", - "sv": "Blågrå", - "pt": "Azul-Cinza", - "ko": "블루 그레이", - "ja": "ブルー グレー", - "en": "Blue Gray", - "ru": "Серо-голубой", - "it": "Grigio blu", - "fr": "Bleu gris", - "hu": "Kékesszürke", - "zh": "蓝灰", - "nl": "Blauwgrijs", - "es": "Gris azulado" - }, - "fila_color": [ - "#5B6579FF" - ] - }, - { - "fila_color_code": "10604", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Kobaltblau", - "sv": "Koboltblå", - "pt": "Azul-cobalto", - "ko": "코발트 블루", - "ja": "コバルト ブルー", - "en": "Cobalt Blue", - "ru": "Синий кобальт", - "it": "Blu cobalto", - "fr": "Bleu cobalt", - "hu": "Kobaltkék", - "zh": "钴蓝色", - "nl": "Kobaltblauw", - "es": "Azul cobalto" - }, - "fila_color": [ - "#0056B8FF" - ] - }, - { - "fila_color_code": "10605", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Türkis", - "sv": "Turkos", - "pt": "Turquesa", - "ko": "터쿼이즈", - "ja": "ターコイズ", - "en": "Turquoise", - "ru": "Бирюзовый", - "it": "Turchese", - "fr": "Turquoise", - "hu": "Türkiz", - "zh": "松石绿", - "nl": "Turkoois", - "es": "Turquesa" - }, - "fila_color": [ - "#00B1B7FF" - ] - }, - { - "fila_color_code": "10603", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Cyan", - "sv": "Cyan", - "pt": "Ciano", - "ko": "시안", - "ja": "シアン", - "en": "Cyan", - "ru": "Голубой", - "it": "Ciano", - "fr": "Cyan", - "hu": "Cián", - "zh": "青色", - "nl": "Cyaan", - "es": "Cian" - }, - "fila_color": [ - "#0086D6FF" - ] - }, - { - "fila_color_code": "10601", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#0A2989FF" - ] - }, - { - "fila_color_code": "10103", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#8E9089FF" - ] - }, - { - "fila_color_code": "10102", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Silber", - "sv": "Silver", - "pt": "Prateado", - "ko": "실버", - "ja": "シルバー", - "en": "Silver", - "ru": "Серебристый", - "it": "Argento", - "fr": "Argenté", - "hu": "Ezüst", - "zh": "银色", - "nl": "Zilver", - "es": "Plateado" - }, - "fila_color": [ - "#A6A9AAFF" - ] - }, - { - "fila_color_code": "10104", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Hellgrau", - "sv": "Ljusgrå", - "pt": "Cinza-claro", - "ko": "라이트 그레이", - "ja": "ライト グレー", - "en": "Light Gray", - "ru": "Светло-серый", - "it": "Grigio chiaro", - "fr": "Gris clair", - "hu": "Világosszürke", - "zh": "浅灰", - "nl": "Lichtgrijs", - "es": "Gris claro" - }, - "fila_color": [ - "#D1D3D5FF" - ] - }, - { - "fila_color_code": "10105", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Dunkelgrau", - "sv": "Mörkgrå", - "pt": "Cinza-escuro", - "ko": "다크 그레이", - "ja": "ダーク グレー", - "en": "Dark Gray", - "ru": "Тёмно-серый", - "it": "Grigio scuro", - "fr": "Gris foncé", - "hu": "Sötétszürke", - "zh": "深灰", - "nl": "Donkergrijs", - "es": "Gris oscuro" - }, - "fila_color": [ - "#545454FF" - ] - }, - { - "fila_color_code": "10500", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "墨绿", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#164B35FF" - ] - }, - { - "fila_color_code": "10502", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Mistelzweig-Grün", - "sv": "Mistelgrön", - "pt": "Mistletoe Green", - "ko": "미슬토 그린", - "ja": "ミスルトー グリーン", - "en": "Mistletoe Green", - "ru": "Зелёная омела", - "it": "Verde vischio", - "fr": "Vert gui", - "hu": "Fagyöngyzöld", - "zh": "圣诞绿", - "nl": "Maretakgroen", - "es": "Verde muérdago" - }, - "fila_color": [ - "#3F8E43FF" - ] - }, - { - "fila_color_code": "10503", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Hellgrün", - "sv": "Ljusgrön", - "pt": "Verde Brilhante", - "ko": "브라이트 그린", - "ja": "ブライト グリーン", - "en": "Bright Green", - "ru": "Салатовый", - "it": "Verde brillante", - "fr": "Vert vif", - "hu": "Világoszöld", - "zh": "苹果绿", - "nl": "Felgroen", - "es": "Verde brillante" - }, - "fila_color": [ - "#BECF00FF" - ] - }, - { - "fila_color_code": "10501", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Bambusgrün", - "sv": "Bambugrön", - "pt": "Verde-bambu", - "ko": "뱀부 그린", - "ja": "バンブー グリーン", - "en": "Bambu Green", - "ru": "Зелёный бамбук", - "it": "Verde bambù", - "fr": "Vert bambou", - "hu": "Bambu-zöld", - "zh": "拓竹绿", - "nl": "Bamboegroen", - "es": "Verde bambú" - }, - "fila_color": [ - "#00AE42FF" - ] - }, - { - "fila_color_code": "10101", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "10900", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Arktisches Flüstern", - "sv": "Arktisk viskning", - "pt": "Arctic Whisper", - "ko": "아크틱 위스퍼", - "ja": "アークティック ウィスパー", - "en": "Arctic Whisper", - "ru": "Арктический шёпот", - "it": "Arctic Whisper", - "fr": "Murmure arctique", - "hu": "Sarkköri suttogás", - "zh": "蓝白渐变", - "nl": "Vleugje noordpool", - "es": "Susurro ártico" - }, - "fila_color": [ - "#FFFFFFFF", - "#9CDBD9FF" - ] - }, - { - "fila_color_code": "10901", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Sonnenbrise", - "sv": "Solbris", - "pt": "Brisa Solar", - "ko": "솔라 브리즈", - "ja": "ソーラー ブリーズ", - "en": "Solar Breeze", - "ru": "Солнечный бриз", - "it": "Solar Breeze", - "fr": "Brise solaire", - "hu": "Napszellő", - "zh": "红白渐变", - "nl": "Zonnebries", - "es": "Brisa solar" - }, - "fila_color": [ - "#E94B3CFF", - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "10902", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Meer und Wiese", - "sv": "Ocean till äng", - "pt": "Ocean to Meadow", - "ko": "오션에서 메도우로", - "ja": "オーシャン トゥ メドウ", - "en": "Ocean to Meadow", - "ru": "Из глубин к морским лугам (Ocean to Meadow)", - "it": "Azzurro/verde con gradazione", - "fr": "Océan à Prairie", - "hu": "Óceántól a rétig", - "zh": "蓝绿渐变", - "nl": "Van oceaanblauw naar weidegroen", - "es": "Del océano a la pradera" - }, - "fila_color": [ - "#307FE2FF", - "#54FF9BFF" - ] - }, - { - "fila_color_code": "10903", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Zitrus-Pink", - "sv": "Rosa citrus", - "pt": "Pink Citrus", - "ko": "핑크 시트러스", - "ja": "ピンク シトラス", - "en": "Pink Citrus", - "ru": "Розовый цитрус", - "it": "Rosa citrus", - "fr": "Agrume rose", - "hu": "Rózsaszín-citrus", - "zh": "霞光粉", - "nl": "Roze citrus", - "es": "Rosa cítrico" - }, - "fila_color": [ - "#F78F77FF", - "#E4505AFF" - ] - }, - { - "fila_color_code": "10904", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Minze-Limette", - "sv": "Mintlime", - "pt": "Menta-lima", - "ko": "민트 라임", - "ja": "ミント ライム", - "en": "Mint Lime", - "ru": "Мятный лайм", - "it": "Lime menta", - "fr": "Menthe citron vert", - "hu": "Menta-lime", - "zh": "青柠绿", - "nl": "Muntlimoen", - "es": "Lima menta" - }, - "fila_color": [ - "#4EC939FF", - "#B6FF43FF" - ] - }, - { - "fila_color_code": "10905", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Blaubeere-Bubblegum", - "sv": "Blåbärsbubbelgum", - "pt": "Chiclete de Mirtilo", - "ko": "블루베리 버블검", - "ja": "ブルーベリー バブルガム", - "en": "Blueberry Bubblegum", - "ru": "Черничная жвачка", - "it": "Mirtillo", - "fr": "Chewing-gum myrtilles", - "hu": "Áfonyás rágógumi", - "zh": "泡泡紫", - "nl": "Bosbessenkauwgum", - "es": "Chicle de arándano" - }, - "fila_color": [ - "#6FCAEFFF", - "#8573DDFF" - ] - }, - { - "fila_color_code": "10906", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Leuchtende Abenddämmerung", - "sv": "Skymningsljus", - "pt": "Brilho do Crepúsculo", - "ko": "더스크 글래어", - "ja": "ダスク グレア", - "en": "Dusk Glare", - "ru": "Сумеречный блик", - "it": "Dusk Glare", - "fr": "Éclat crépusculaire", - "hu": "Alkonyati csillámlás", - "zh": "日落橙", - "nl": "Schemerlicht", - "es": "Resplandor del crepúsculo" - }, - "fila_color": [ - "#CE4406FF", - "#ED9558FF" - ] - }, - { - "fila_color_code": "10907", - "fila_id": "GFA00", - "fila_color_type": "渐变色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Zuckerwatten-Wolke", - "sv": "Sockervaddsmoln", - "pt": "Cotton Candy Cloud", - "ko": "코튼 캔디 클라우드", - "ja": "コットン キャンディ クラウド", - "en": "Cotton Candy Cloud", - "ru": "Сахарная вата", - "it": "Zucchero filato", - "fr": "Nuage de barbe à papa", - "hu": "Vattacukorfelhő", - "zh": "多巴胺（粉蓝渐变）", - "nl": "Suikerspinwolk", - "es": "Nube de algodón de azúcar" - }, - "fila_color": [ - "#8EC9E9FF", - "#E7C1D5FF" - ] - }, - { - "fila_color_code": "10800", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Braun", - "sv": "Brun", - "pt": "Marrom", - "ko": "브라운", - "ja": "ブラウン", - "en": "Brown", - "ru": "Коричневый", - "it": "Marrone", - "fr": "Marron", - "hu": "Barna", - "zh": "棕色", - "nl": "Bruin", - "es": "Marrón" - }, - "fila_color": [ - "#9D432CFF" - ] - }, - { - "fila_color_code": "10802", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Kakaobraun", - "sv": "Kakaobrun", - "pt": "Cacau Marrom", - "ko": "코코아 브라운", - "ja": "ココア ブラウン", - "en": "Cocoa Brown", - "ru": "Коричневый какао", - "it": "Marrone cacao", - "fr": "Marron cacao", - "hu": "Kakaóbarna", - "zh": "可可棕", - "nl": "Chocoladebruin", - "es": "Marrón cacao" - }, - "fila_color": [ - "#6F5034FF" - ] - }, - { - "fila_color_code": "10201", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Beige", - "sv": "Beige", - "pt": "Bege", - "ko": "베이지", - "ja": "ベージュ", - "en": "Beige", - "ru": "Бежевый", - "it": "Beige", - "fr": "Beige", - "hu": "Bézs", - "zh": "杏色", - "nl": "Beige", - "es": "Beis" - }, - "fila_color": [ - "#F7E6DEFF" - ] - }, - { - "fila_color_code": "10203", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Pink", - "sv": "Rosa", - "pt": "Rosa", - "ko": "핑크", - "ja": "ピンク", - "en": "Pink", - "ru": "Розовый", - "it": "Rosa", - "fr": "Rose", - "hu": "Rózsaszín", - "zh": "粉色", - "nl": "Roze", - "es": "Rosa" - }, - "fila_color": [ - "#F55A74FF" - ] - }, - { - "fila_color_code": "10701", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Indigo-Violett", - "sv": "Indigolila", - "pt": "Indigo Purple", - "ko": "인디고 퍼플", - "ja": "インディゴ パープル", - "en": "Indigo Purple", - "ru": "Тёмный индиго", - "it": "Viola indaco", - "fr": "Violet indigo", - "hu": "Indigólila", - "zh": "绀紫色", - "nl": "Indigopaars", - "es": "Púrpura índigo" - }, - "fila_color": [ - "#482960FF" - ] - }, - { - "fila_color_code": "10700", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Lila", - "sv": "Lila", - "pt": "Roxo", - "ko": "퍼플", - "ja": "パープル", - "en": "Purple", - "ru": "Пурпурный", - "it": "Viola", - "fr": "Violet", - "hu": "Lila", - "zh": "紫色", - "nl": "Paars", - "es": "Púrpura" - }, - "fila_color": [ - "#5E43B7FF" - ] - }, - { - "fila_color_code": "10202", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Magenta", - "sv": "Magenta", - "pt": "Magenta", - "ko": "마젠타", - "ja": "マゼンタ", - "en": "Magenta", - "ru": "Малиновый", - "it": "Magenta", - "fr": "Magenta", - "hu": "Magenta", - "zh": "品红", - "nl": "Magenta", - "es": "Magenta" - }, - "fila_color": [ - "#EC008CFF" - ] - }, - { - "fila_color_code": "10200", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#C12E1FFF" - ] - }, - { - "fila_color_code": "10205", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Kastanienrot", - "sv": "Rödbrun", - "pt": "Maroon Red", - "ko": "마룬 레드", - "ja": "マルーン レッド", - "en": "Maroon Red", - "ru": "Бордовый", - "it": "Rosso bordeaux", - "fr": "Rouge marron", - "hu": "Gesztenyés vörös", - "zh": "胭脂红", - "nl": "Kastanjerood", - "es": "Rojo granate" - }, - "fila_color": [ - "#9D2235FF" - ] - }, - { - "fila_color_code": "10204", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Heißes Pink", - "sv": "Neonrosa", - "pt": "Rosa-choque", - "ko": "핫핑크", - "ja": "ホット ピンク", - "en": "Hot Pink", - "ru": "Ярко-розовый", - "it": "Fucsia", - "fr": "Rose vif", - "hu": "Forró rózsaszín", - "zh": "桃红色", - "nl": "Felroze", - "es": "Rosa fucsia" - }, - "fila_color": [ - "#F5547CFF" - ] - }, - { - "fila_color_code": "10100", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Jade-Weiß", - "sv": "Jadevit", - "pt": "Jade Branco", - "ko": "제이드 화이트", - "ja": "ジェイド ホワイト", - "en": "Jade White", - "ru": "Белый нефрит", - "it": "Bianco giada", - "fr": "Blanc de jade", - "hu": "Jádefehér", - "zh": "玉石白", - "nl": "Jadewit", - "es": "Blanco jade" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "10400", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#F4EE2AFF" - ] - }, - { - "fila_color_code": "10402", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Sonnenblumen-Gelb", - "sv": "Solrosgul", - "pt": "Girassol Amarelo", - "ko": "썬플라워 옐로우", - "ja": "サンフラワー イエロー", - "en": "Sunflower Yellow", - "ru": "Жёлтый подсолнух", - "it": "Giallo girasole", - "fr": "Jaune tournesol", - "hu": "Napraforgósárga", - "zh": "暖黄色", - "nl": "Zonnebloemgeel", - "es": "Amarillo girasol" - }, - "fila_color": [ - "#FEC600FF" - ] - }, - { - "fila_color_code": "10801", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Bronze", - "sv": "Brons", - "pt": "Bronze", - "ko": "브론즈", - "ja": "ブロンズ", - "en": "Bronze", - "ru": "Бронзовый", - "it": "Bronzo", - "fr": "Bronze", - "hu": "Bronz", - "zh": "青铜", - "nl": "Bronskleurig", - "es": "Bronce" - }, - "fila_color": [ - "#847D48FF" - ] - }, - { - "fila_color_code": "10401", - "fila_id": "GFA00", - "fila_color_type": "单色", - "fila_type": "PLA Basic", - "fila_color_name": { - "de": "Gold", - "sv": "Guld", - "pt": "Dourado", - "ko": "골드", - "ja": "ゴールド", - "en": "Gold", - "ru": "Золотистый", - "it": "Oro", - "fr": "Doré", - "hu": "Arany", - "zh": "金色", - "nl": "Goud", - "es": "Dorado" - }, - "fila_color": [ - "#E4BD68FF" - ] - }, - { - "fila_color_code": "11300", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Mandarine-Orange", - "sv": "Mandarinorange", - "pt": "Tangerina", - "ko": "만다린 오렌지", - "ja": "マンダリン オレンジ", - "en": "Mandarin Orange", - "ru": "Оранжевый мандарин", - "it": "Arancio mandarino", - "fr": "Mandarine", - "hu": "Mandarinsárga", - "zh": "橘橙", - "nl": "Mandarijnoranje", - "es": "Naranja Mandarina" - }, - "fila_color": [ - "#F99963FF" - ] - }, - { - "fila_color_code": "11603", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Himmelblau", - "sv": "Himmelsblå", - "pt": "Azul-celeste", - "ko": "스카이 블루", - "ja": "スカイ ブルー", - "en": "Sky Blue", - "ru": "Небесно-голубой", - "it": "Azzurro cielo", - "fr": "Bleu ciel", - "hu": "Égszínkék", - "zh": "天蓝色", - "nl": "Hemelsblauw", - "es": "Azul cielo" - }, - "fila_color": [ - "#56B7E6FF" - ] - }, - { - "fila_color_code": "11600", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Marineblau", - "sv": "Marinblå", - "pt": "Azul-marinho", - "ko": "마린 블루", - "ja": "マリン ブルー", - "en": "Marine Blue", - "ru": "Морской синий", - "it": "Blu marino", - "fr": "Bleu marine", - "hu": "Tengerkék", - "zh": "海蓝", - "nl": "Marineblauw", - "es": "Azul marino" - }, - "fila_color": [ - "#0078BFFF" - ] - }, - { - "fila_color_code": "11601", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Eisblau", - "sv": "Isblå", - "pt": "Azul-gelo", - "ko": "아이스 블루", - "ja": "アイス ブルー", - "en": "Ice Blue", - "ru": "Голубой лёд", - "it": "Blu ghiaccio", - "fr": "Bleu glacier", - "hu": "Jégkék", - "zh": "冰蓝", - "nl": "IJsblauw", - "es": "Azul hielo" - }, - "fila_color": [ - "#A3D8E1FF" - ] - }, - { - "fila_color_code": "11602", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Dunkelblau", - "sv": "Mörkblå", - "pt": "Azul-escuro", - "ko": "다크 블루", - "ja": "ダーク ブルー", - "en": "Dark Blue", - "ru": "Тёмно-синий", - "it": "Blu scuro", - "fr": "Bleu foncé", - "hu": "Sötétkék", - "zh": "暗夜蓝", - "nl": "Donkerblauw", - "es": "Azul oscuro" - }, - "fila_color": [ - "#042F56FF" - ] - }, - { - "fila_color_code": "11104", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Nardo-Grau", - "sv": "Nardogrå", - "pt": "Nardo Gray", - "ko": "나르도 그레이", - "ja": "ナルド グレイ", - "en": "Nardo Gray", - "ru": "Серый Nardo", - "it": "Grigio Nardo", - "fr": "Gris nardo", - "hu": "Matt szürke", - "zh": "枪灰色", - "nl": "Nardogrijs", - "es": "Gris nardo" - }, - "fila_color": [ - "#757575FF" - ] - }, - { - "fila_color_code": "11102", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Aschgrau", - "sv": "Askgrå", - "pt": "Ash Gray", - "ko": "애쉬 그레이", - "ja": "アッシュ グレー", - "en": "Ash Gray", - "ru": "Пепельный", - "it": "Grigio cenere", - "fr": "Gris cendré", - "hu": "Hamuszürke", - "zh": "岩石灰", - "nl": "Asgrijs", - "es": "Gris ceniza" - }, - "fila_color": [ - "#9B9EA0FF" - ] - }, - { - "fila_color_code": "11502", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Apfelgrün", - "sv": "Äppelgrön", - "pt": "Maçã-Verde", - "ko": "애플 그린", - "ja": "アップル グリーン", - "en": "Apple Green", - "ru": "Яблочный", - "it": "Verde mela", - "fr": "Vert pomme", - "hu": "Almazöld", - "zh": "果绿色", - "nl": "Appelgroen", - "es": "Verde manzana" - }, - "fila_color": [ - "#C2E189FF" - ] - }, - { - "fila_color_code": "11500", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Grasgrün", - "sv": "Gräsgrön", - "pt": "Grama Verde", - "ko": "그래스 그린", - "ja": "グラス グリーン", - "en": "Grass Green", - "ru": "Травянистый", - "it": "Verde prato", - "fr": "Vert herbacé", - "hu": "Fűzöld", - "zh": "草绿", - "nl": "Grasgroen", - "es": "Verde hierba" - }, - "fila_color": [ - "#61C680FF" - ] - }, - { - "fila_color_code": "11501", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Dunkelgrün", - "sv": "Mörkgrön", - "pt": "Verde-escuro", - "ko": "다크 그린", - "ja": "ダーク グリーン", - "en": "Dark Green", - "ru": "Тёмно-зелёный", - "it": "Verde scuro", - "fr": "Vert foncé", - "hu": "Sötétzöld", - "zh": "暗夜绿", - "nl": "Donkergroen", - "es": "Verde oscuro" - }, - "fila_color": [ - "#68724DFF" - ] - }, - { - "fila_color_code": "11101", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Kohlschwarz", - "sv": "Kolsvart", - "pt": "Carvão", - "ko": "차콜", - "ja": "チャコール", - "en": "Charcoal", - "ru": "Угольный", - "it": "Carbone", - "fr": "Anthracite", - "hu": "Faszén", - "zh": "炭黑", - "nl": "Donkergrijs", - "es": "Carbón" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "11802", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Dunkel-Schokoladenbraun", - "sv": "Mörk choklad", - "pt": "Chocolate-escuro", - "ko": "다크 초콜릿", - "ja": "ダーク チョコレート", - "en": "Dark Chocolate", - "ru": "Тёмный шоколад", - "it": "Cioccolato", - "fr": "Chocolat noir", - "hu": "Étcsokoládé", - "zh": "深棕色", - "nl": "Donkerchocoladebruin", - "es": "Chocolate oscuro" - }, - "fila_color": [ - "#4D3324FF" - ] - }, - { - "fila_color_code": "11800", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Milchkaffee-Braun", - "sv": "Lattebrun", - "pt": "Café com Leite", - "ko": "라떼 브라운", - "ja": "ラテ ブラウン", - "en": "Latte Brown", - "ru": "Латте", - "it": "Caffelatte", - "fr": "Marron latte", - "hu": "Lattebarna", - "zh": "拿铁褐", - "nl": "Lattebruin", - "es": "Marrón Latte" - }, - "fila_color": [ - "#D3B7A7FF" - ] - }, - { - "fila_color_code": "11801", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Dunkelbraun", - "sv": "Mörkbrun", - "pt": "Marrom-escuro", - "ko": "다크 브라운", - "ja": "ダーク ブラウン", - "en": "Dark Brown", - "ru": "Тёмно-коричневый", - "it": "Marrone scuro", - "fr": "Marron foncé", - "hu": "Sötétbarna", - "zh": "暗夜棕", - "nl": "Donkerbruin", - "es": "Marrón oscuro" - }, - "fila_color": [ - "#7D6556FF" - ] - }, - { - "fila_color_code": "11803", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Karamell", - "sv": "Kola", - "pt": "Caramelo", - "ko": "캐러멜", - "ja": "キャラメル", - "en": "Caramel", - "ru": "Карамельный", - "it": "Caramello", - "fr": "Caramel", - "hu": "Karamella", - "zh": "沙棕色", - "nl": "Karamel", - "es": "Caramelo" - }, - "fila_color": [ - "#AE835BFF" - ] - }, - { - "fila_color_code": "11201", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Sakura-Pink", - "sv": "Körsbärsrosa", - "pt": "Sakura Rosa", - "ko": "사쿠라 핑크", - "ja": "サクラ ピンク", - "en": "Sakura Pink", - "ru": "Розовая сакура", - "it": "Rosa sakura", - "fr": "Rose sakura", - "hu": "Szakurarózsaszín", - "zh": "樱花粉", - "nl": "Sakura-roze", - "es": "Rosa sakura" - }, - "fila_color": [ - "#E8AFCFFF" - ] - }, - { - "fila_color_code": "11700", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Flieder-Violett", - "sv": "Syrenlila", - "pt": "Lilás Roxo", - "ko": "라일락 퍼플", - "ja": "ライラック パープル", - "en": "Lilac Purple", - "ru": "Сиреневый", - "it": "Lilla", - "fr": "Violet lilas", - "hu": "Ibolya", - "zh": "丁香紫", - "nl": "Lilapaars", - "es": "Púrpura lila" - }, - "fila_color": [ - "#AE96D4FF" - ] - }, - { - "fila_color_code": "11200", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Scharlachrot", - "sv": "Scharlakansröd", - "pt": "Vermelho Escarlate", - "ko": "스칼렛 레드", - "ja": "スカーレット レッド", - "en": "Scarlet Red", - "ru": "Алый ", - "it": "Rosso scarlatto", - "fr": "Rouge écarlate", - "hu": "Skarlátvörös", - "zh": "猩红", - "nl": "Scharlakenrood", - "es": "Rojo escarlata" - }, - "fila_color": [ - "#DE4343FF" - ] - }, - { - "fila_color_code": "11203", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Terrakotta", - "sv": "Terrakotta", - "pt": "Terracota", - "ko": "테라코타", - "ja": "テラコッタ", - "en": "Terracotta", - "ru": "Терракотовый", - "it": "Terracotta", - "fr": "Terre cuite", - "hu": "Terrakotta", - "zh": "砖红色", - "nl": "Terracotta", - "es": "Terracota" - }, - "fila_color": [ - "#B15533FF" - ] - }, - { - "fila_color_code": "11204", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Pflaume", - "sv": "Plommon", - "pt": "Ameixa", - "ko": "플럼", - "ja": "プラム", - "en": "Plum", - "ru": "Сливовый", - "it": "Prugna", - "fr": "Prune", - "hu": "Szilva", - "zh": "莓果紫", - "nl": "Pruim", - "es": "Ciruela" - }, - "fila_color": [ - "#950051FF" - ] - }, - { - "fila_color_code": "11202", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Dunkelrot", - "sv": "Mörkröd", - "pt": "Vermelho-escuro", - "ko": "다크 레드", - "ja": "ダーク レッド", - "en": "Dark Red", - "ru": "Тёмно-красный", - "it": "Rosso scuro", - "fr": "Rouge foncé", - "hu": "Sötétvörös", - "zh": "暗夜红", - "nl": "Donkerrood", - "es": "Rojo oscuro" - }, - "fila_color": [ - "#BB3D43FF" - ] - }, - { - "fila_color_code": "11100", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Elfenbeinweiß", - "sv": "Elfenbensvit", - "pt": "Branco Marfim", - "ko": "아이보리 화이트", - "ja": "アイボリー ホワイト", - "en": "Ivory White", - "ru": "Слоновья кость", - "it": "Bianco avorio", - "fr": "Blanc ivoire", - "hu": "Elefántcsontfehér", - "zh": "象牙白", - "nl": "Ivoorwit", - "es": "Blanco marfil" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "11103", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Knochenweiß", - "sv": "Benvit", - "pt": "Bone White", - "ko": "본 화이트", - "ja": "ボーン ホワイト", - "en": "Bone White", - "ru": "Белая кость", - "it": "Bianco osso", - "fr": "Blanc os", - "hu": "Csontfehér", - "zh": "骨白", - "nl": "Beenwit", - "es": "Blanco hueso" - }, - "fila_color": [ - "#CBC6B8FF" - ] - }, - { - "fila_color_code": "11400", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Zitronengelb", - "sv": "Citrongul", - "pt": "Amarelo-limão", - "ko": "레몬 옐로우", - "ja": "レモン イエロー", - "en": "Lemon Yellow", - "ru": "Лимонный", - "it": "Giallo limone", - "fr": "Jaune citron", - "hu": "Citromsárga", - "zh": "柠檬黄", - "nl": "Citroengeel", - "es": "Amarillo limón" - }, - "fila_color": [ - "#F7D959FF" - ] - }, - { - "fila_color_code": "11401", - "fila_id": "GFA01", - "fila_color_type": "单色", - "fila_type": "PLA Matte", - "fila_color_name": { - "de": "Wüstenbraun", - "sv": "Ökenbrun", - "pt": "Desert Tan", - "ko": "데저트 탄", - "ja": "デザート タン", - "en": "Desert Tan", - "ru": "Песочный загар", - "it": "Sabbia", - "fr": "Brun clair du désert", - "hu": "Sivatagi cser", - "zh": "沙漠黄", - "nl": "Woestijnbruin", - "es": "Arena del desierto" - }, - "fila_color": [ - "#E8DBB7FF" - ] - }, - { - "fila_color_code": "13601", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#147BD1FF" - ] - }, - { - "fila_color_code": "13104", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Silber", - "sv": "Silver", - "pt": "Prateado", - "ko": "실버", - "ja": "シルバー", - "en": "Silver", - "ru": "Серебристый", - "it": "Argento", - "fr": "Argenté", - "hu": "Ezüst", - "zh": "银色", - "nl": "Zilver", - "es": "Plateado" - }, - "fila_color": [ - "#EAECEBFF" - ] - }, - { - "fila_color_code": "13502", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "绿色", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#4CE4A0FF" - ] - }, - { - "fila_color_code": "13300", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Kupfer", - "sv": "Koppar", - "pt": "Cobre", - "ko": "코퍼", - "ja": "カッパー", - "en": "Copper", - "ru": "Медный", - "it": "Rame", - "fr": "Cuivre", - "hu": "Réz", - "zh": "铜色", - "nl": "Koperkleurig", - "es": "Cobre" - }, - "fila_color": [ - "#5E4B3CFF" - ] - }, - { - "fila_color_code": "13202", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Pink", - "sv": "Rosa", - "pt": "Rosa", - "ko": "핑크", - "ja": "ピンク", - "en": "Pink", - "ru": "Розовый", - "it": "Rosa", - "fr": "Rose", - "hu": "Rózsaszín", - "zh": "粉色", - "nl": "Roze", - "es": "Rosa" - }, - "fila_color": [ - "#EEB1C1FF" - ] - }, - { - "fila_color_code": "13701", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Lila", - "sv": "Lila", - "pt": "Roxo", - "ko": "퍼플", - "ja": "パープル", - "en": "Purple", - "ru": "Пурпурный", - "it": "Viola", - "fr": "Violet", - "hu": "Lila", - "zh": "紫色", - "nl": "Paars", - "es": "Púrpura" - }, - "fila_color": [ - "#854CE4FF" - ] - }, - { - "fila_color_code": "13901", - "fila_id": "GFA05", - "fila_color_type": "多拼色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Goldenes Rosa", - "sv": "Gyllene ros", - "pt": "Rosa Dourada", - "ko": "길디드 로즈", - "ja": "ギルディッド ローズ", - "en": "Gilded Rose", - "ru": "Позолоченная роза", - "it": "Rosa con sfumature dorate", - "fr": "Rose doré", - "hu": "Aranyozott rózsa", - "zh": "金粉双色", - "nl": "Vergulde roos", - "es": "Rosa dorado" - }, - "fila_color": [ - "#FF9425FF", - "#C16784FF" - ] - }, - { - "fila_color_code": "13902", - "fila_id": "GFA05", - "fila_color_type": "多拼色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Mitternachtsglanz", - "sv": "Midnattsflamma", - "pt": "Midnight Blaze", - "ko": "미드나이트 블레이즈", - "ja": "ミッドナイト ブレイズ", - "en": "Midnight Blaze", - "ru": "Ночное пламя", - "it": "Midnight Blaze", - "fr": "Feu de minuit", - "hu": "Éjféli ragyogás", - "zh": "蓝红双色", - "nl": "Middernachtblauw", - "es": "Resplandor de medianoche" - }, - "fila_color": [ - "#0047BBFF", - "#7D1B49FF" - ] - }, - { - "fila_color_code": "13903", - "fila_id": "GFA05", - "fila_color_type": "多拼色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Neon City", - "sv": "Stadsljus", - "pt": "Cidade Neon", - "ko": "네온 시티", - "ja": "ネオン シティ", - "en": "Neon City", - "ru": "Неоновый город", - "it": "Neon City", - "fr": "Ville de Néon", - "hu": "Neonfény", - "zh": "蓝粉双色", - "nl": "Neonstad", - "es": "Ciudad de neón" - }, - "fila_color": [ - "#BB22A3FF", - "#0047BBFF" - ] - }, - { - "fila_color_code": "13904", - "fila_id": "GFA05", - "fila_color_type": "多拼色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Hawaii-Blau", - "sv": "Blå Hawaii", - "pt": "Blue Hawaii", - "ko": "블루 하와이", - "ja": "ブルー ハワイ", - "en": "Blue Hawaii", - "ru": "Гавайский голубой", - "it": "Blue Hawaii", - "fr": "Hawaï bleu", - "hu": "Kék Hawaii", - "zh": "蓝绿双色", - "nl": "Blauw Hawaï", - "es": "Azul Hawái" - }, - "fila_color": [ - "#70C884FF", - "#418FDEFF" - ] - }, - { - "fila_color_code": "13905", - "fila_id": "GFA05", - "fila_color_type": "多拼色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Dunkler Samt (Schwarz-Rot)", - "sv": "Sammetsglans (svart-röd)", - "pt": "Velvet Eclipse (Preto-Vermelho)", - "ko": "벨벳 이클립스(블랙-레드)", - "ja": "ベルベット エクリプス (ブラック レッド)", - "en": "Velvet Eclipse (Black-Red)", - "ru": "Бархатное затмение (чёрно-красный)", - "it": "Velvet Eclipse (nero/rosso)", - "fr": "Éclipse de velours (Noir-Rouge)", - "hu": "Bársony naplemente (fekete-piros)", - "zh": "灰烬红", - "nl": "Fluwelen zonsverduistering (zwart-rood)", - "es": "Eclipse de terciopelo (negro-rojo)" - }, - "fila_color": [ - "#000000FF", - "#A34342FF" - ] - }, - { - "fila_color_code": "13105", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "13401", - "fila_id": "GFA05", - "fila_color_type": "单色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "Gold", - "sv": "Guld", - "pt": "Dourado", - "ko": "골드", - "ja": "ゴールド", - "en": "Gold", - "ru": "Золотой", - "it": "Oro", - "fr": "Doré", - "hu": "Arany", - "zh": "金色", - "nl": "Goud", - "es": "Dorado" - }, - "fila_color": [ - "#E5B03DFF" - ] - }, - { - "fila_color_code": "13603", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Babyblau", - "sv": "Babyblå", - "pt": "Azul-bebê", - "ko": "베이비 블루", - "ja": "ベイビー ブルー", - "en": "Baby Blue", - "ru": "Нежно-голубой", - "it": "Blu-turchese chiaro", - "fr": "Bleu layette", - "hu": "Babakék", - "zh": "天空蓝", - "nl": "Babyblauw", - "es": "Azul bebé" - }, - "fila_color": [ - "#A8C6EEFF" - ] - }, - { - "fila_color_code": "13604", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "丝绸蓝", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#008BDAFF" - ] - }, - { - "fila_color_code": "13108", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Titangrau", - "sv": "Titangrå", - "pt": "Titan Gray", - "ko": "타이탄 그레이", - "ja": "チタン グレー", - "en": "Titan Gray", - "ru": "Титановый", - "it": "Grigio titanio", - "fr": "Gris titane", - "hu": "Titánszürke", - "zh": "钛灰色", - "nl": "Titaangrijs", - "es": "Gris titán" - }, - "fila_color": [ - "#5F6367FF" - ] - }, - { - "fila_color_code": "13109", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Silber", - "sv": "Silver", - "pt": "Prateado", - "ko": "실버", - "ja": "シルバー", - "en": "Silver", - "ru": "Серебристый", - "it": "Argento", - "fr": "Argenté", - "hu": "Ezüst", - "zh": "丝绸银", - "nl": "Zilver", - "es": "Plateado" - }, - "fila_color": [ - "#C8C8C8FF" - ] - }, - { - "fila_color_code": "13506", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Candy-Grün", - "sv": "Godisgrön", - "pt": "Candy Green", - "ko": "캔디 그린", - "ja": "キャンディ グリーン", - "en": "Candy Green", - "ru": "Зелёный леденец", - "it": "Verde caramella", - "fr": "Vert bonbon", - "hu": "Cukorkazöld", - "zh": "糖果绿", - "nl": "Snoepgroen", - "es": "Verde caramelo" - }, - "fila_color": [ - "#018814FF" - ] - }, - { - "fila_color_code": "13507", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Minze", - "sv": "Mint", - "pt": "Menta", - "ko": "민트", - "ja": "ミント", - "en": "Mint", - "ru": "Мятный", - "it": "Menta", - "fr": "Menthe", - "hu": "Menta", - "zh": "薄荷绿", - "nl": "Munt", - "es": "Menta" - }, - "fila_color": [ - "#96DCB9FF" - ] - }, - { - "fila_color_code": "13702", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Lila", - "sv": "Lila", - "pt": "Roxo", - "ko": "퍼플", - "ja": "パープル", - "en": "Purple", - "ru": "Пурпурный", - "it": "Viola", - "fr": "Violet", - "hu": "Lila", - "zh": "丝绸紫", - "nl": "Paars", - "es": "Púrpura" - }, - "fila_color": [ - "#8671CBFF" - ] - }, - { - "fila_color_code": "13205", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Candy-Rot", - "sv": "Godisröd", - "pt": "Candy Red", - "ko": "캔디 레드", - "ja": "キャンディ レッド", - "en": "Candy Red", - "ru": "Красный леденец", - "it": "Rosso caramella", - "fr": "Rouge bonbon", - "hu": "Cukorkapiros", - "zh": "糖果红", - "nl": "Snoeprood", - "es": "Rojo caramelo" - }, - "fila_color": [ - "#D02727FF" - ] - }, - { - "fila_color_code": "13206", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Gold-Rosa", - "sv": "Rödguld", - "pt": "Ouro Rosa", - "ko": "로즈 골드", - "ja": "ローズ ゴールド", - "en": "Rose Gold", - "ru": "Розовое золото", - "it": "Oro rosa", - "fr": "Doré rose", - "hu": "Rózsaarany", - "zh": "烟粉色", - "nl": "Roségoud", - "es": "Oro rosa" - }, - "fila_color": [ - "#BA9594FF" - ] - }, - { - "fila_color_code": "13207", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Pink", - "sv": "Rosa", - "pt": "Rosa", - "ko": "핑크", - "ja": "ピンク", - "en": "Pink", - "ru": "Розовый", - "it": "Rosa", - "fr": "Rose", - "hu": "Rózsaszín", - "zh": "丝绸粉", - "nl": "Roze", - "es": "Rosa" - }, - "fila_color": [ - "#F7ADA6FF" - ] - }, - { - "fila_color_code": "13110", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "丝绸白", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "13404", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Champagner", - "sv": "Champagne", - "pt": "Champagne", - "ko": "샴페인", - "ja": "シャンパン", - "en": "Champagne", - "ru": "Шампань", - "it": "Champagne", - "fr": "Champagne", - "hu": "Pezsgő", - "zh": "香槟色", - "nl": "Champagne", - "es": "Champán" - }, - "fila_color": [ - "#F3CFB2FF" - ] - }, - { - "fila_color_code": "13405", - "fila_id": "GFA06", - "fila_color_type": "单色", - "fila_type": "PLA Silk+", - "fila_color_name": { - "de": "Gold", - "sv": "Guld", - "pt": "Dourado", - "ko": "골드", - "ja": "ゴールド", - "en": "Gold", - "ru": "Золотистый", - "it": "Oro", - "fr": "Doré", - "hu": "Arany", - "zh": "丝绸金", - "nl": "Goud", - "es": "Dorado" - }, - "fila_color": [ - "#F4A925FF" - ] - }, - { - "fila_color_code": "13103", - "fila_id": "GFA07", - "fila_color_type": "单色", - "fila_type": "PLA Marble", - "fila_color_name": { - "de": "Weißer Marmor", - "sv": "Vit marmor", - "pt": "Mármore Branco", - "ko": "화이트 마블", - "ja": "ホワイト マーブル", - "en": "White Marble", - "ru": "Белый мрамор", - "it": "Marmo bianco", - "fr": "Marbre blanc", - "hu": "Fehér márvány", - "zh": "大理石", - "nl": "Wit marmer", - "es": "Mármol blanco" - }, - "fila_color": [ - "#F7F3F0FF" - ] - }, - { - "fila_color_code": "13201", - "fila_id": "GFA07", - "fila_color_type": "单色", - "fila_type": "PLA Marble", - "fila_color_name": { - "de": "Granitrot", - "sv": "Röd granit", - "pt": "Granito Vermelho", - "ko": "레드 그래나이트", - "ja": "レッド グラナイト", - "en": "Red Granite", - "ru": "Красный гранит", - "it": "Rosso granito", - "fr": "Granit rouge", - "hu": "Vörös gránit", - "zh": "砖红", - "nl": "Rood graniet", - "es": "Granate rojo" - }, - "fila_color": [ - "#AD4E38FF" - ] - }, - { - "fila_color_code": "13700", - "fila_id": "GFA08", - "fila_color_type": "单色", - "fila_type": "PLA Sparkle", - "fila_color_name": { - "de": "Glitzerndes Königslila", - "sv": "Kungslila glans", - "pt": "Royal Purple Sparkle", - "ko": "로얄 퍼플 스파클", - "ja": "ロイヤル パープル スパークル", - "en": "Royal Purple Sparkle", - "ru": "Королевский фиолетовый", - "it": "Viola reale con brillantini", - "fr": "Violet royal scintillant", - "hu": "Csillámló királyi lila", - "zh": "深蓝", - "nl": "Sprankelend koningspaars", - "es": "Púrpura real brillante" - }, - "fila_color": [ - "#483D8BFF" - ] - }, - { - "fila_color_code": "13102", - "fila_id": "GFA08", - "fila_color_type": "单色", - "fila_type": "PLA Sparkle", - "fila_color_name": { - "de": "Glitzerndes Schiefergrau", - "sv": "Granitgrå glans", - "pt": "Slate Gray Sparkle", - "ko": "슬레이트 그레이 스파클", - "ja": "スレート グレース パークル", - "en": "Slate Gray Sparkle", - "ru": "Сланцево-серый", - "it": "Grigio ardesia con brillantini", - "fr": "Gris ardoise scintillant", - "hu": "Csillámló palaszürke", - "zh": "灰色", - "nl": "Sprankelend leigrijs", - "es": "Gris pizarra brillante" - }, - "fila_color": [ - "#8E9089FF" - ] - }, - { - "fila_color_code": "13501", - "fila_id": "GFA08", - "fila_color_type": "单色", - "fila_type": "PLA Sparkle", - "fila_color_name": { - "de": "Glitzerndes Alpengrün", - "sv": "Alpingrön glans", - "pt": "Alpine Green Sparkle", - "ko": "알파인 그린 스파클", - "ja": "アルパイン グリーン スパークル", - "en": "Alpine Green Sparkle", - "ru": "Альпийский зелёный", - "it": "Verde alpino con brillantini", - "fr": "Vert alpin scintillant", - "hu": "Alpesi csillogó zöld", - "zh": "绿色", - "nl": "Sprankelend alpengroen", - "es": "Verde alpino brillante" - }, - "fila_color": [ - "#3F5443FF" - ] - }, - { - "fila_color_code": "13101", - "fila_id": "GFA08", - "fila_color_type": "单色", - "fila_type": "PLA Sparkle", - "fila_color_name": { - "de": "Glitzerndes Onyx-Schwarz", - "sv": "Onyxsvart glans", - "pt": "Onyx Black Sparkle", - "ko": "오닉스 블랙 스파클", - "ja": "オニキス ブラック スパークル", - "en": "Onyx Black Sparkle", - "ru": "Чёрный оникс", - "it": "Nero onice con brillantini", - "fr": "Onyx noir scintillant", - "hu": "Csillámló ónixfekete", - "zh": "黑色", - "nl": "Sprankelend onyxzwart", - "es": "Negro ónix brillante" - }, - "fila_color": [ - "#2D2B28FF" - ] - }, - { - "fila_color_code": "13200", - "fila_id": "GFA08", - "fila_color_type": "单色", - "fila_type": "PLA Sparkle", - "fila_color_name": { - "de": "Glitzerndes Karminrot", - "sv": "Mörkröd glans", - "pt": "Crimson Red Sparkle", - "ko": "크림슨 레드 스파클", - "ja": "クリムゾン レッド スパークル", - "en": "Crimson Red Sparkle", - "ru": "Багровый красный", - "it": "Rosso cremisi con brillantini", - "fr": "Pourpre scintillant", - "hu": "Csillámló bíborvörös", - "zh": "红色", - "nl": "Sprankelend karmozijnrood", - "es": "Rojo carmesí brillante" - }, - "fila_color": [ - "#792B36FF" - ] - }, - { - "fila_color_code": "13402", - "fila_id": "GFA08", - "fila_color_type": "单色", - "fila_type": "PLA Sparkle", - "fila_color_name": { - "de": "Klassisches Glitzer-Gold", - "sv": "Klassisk guld glans", - "pt": "Classic Gold Sparkle", - "ko": "클래식 골드 스파클", - "ja": "クラシック ゴールド スパークル", - "en": "Classic Gold Sparkle", - "ru": "Античное золото", - "it": "Oro con brillantini", - "fr": "Doré classique scintillant", - "hu": "Klasszikus csillogó arany", - "zh": "金色", - "nl": "Sprankelend klassiek goud", - "es": "Dorado clásico brillante" - }, - "fila_color": [ - "#CEA629FF" - ] - }, - { - "fila_color_code": "12300", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Orange", - "sv": "Orange", - "pt": "Laranja", - "ko": "오렌지", - "ja": "オレンジ", - "en": "Orange", - "ru": "Оранжевый", - "it": "Arancione", - "fr": "Orange", - "hu": "Narancssárga", - "zh": "橙色", - "nl": "Oranje", - "es": "Naranja" - }, - "fila_color": [ - "#FF7F41FF" - ] - }, - { - "fila_color_code": "12600", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Hellblau", - "sv": "Ljusblå", - "pt": "Azul-claro", - "ko": "라이트 블루", - "ja": "ライト ブルー", - "en": "Light Blue", - "ru": "Голубой", - "it": "Azzurro chiaro", - "fr": "Bleu clair", - "hu": "Világoskék", - "zh": "浅蓝", - "nl": "Lichtblauw", - "es": "Azul claro" - }, - "fila_color": [ - "#0085ADFF" - ] - }, - { - "fila_color_code": "12700", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Lavendelblau", - "sv": "Lavendelblå", - "pt": "Azul-lavanda", - "ko": "라벤더 블루", - "ja": "ラベンダー ブルー", - "en": "Lavender Blue", - "ru": "Лавандовый", - "it": "Blu lavanda", - "fr": "Bleu lavande", - "hu": "Levendulakék", - "zh": "薰衣草紫", - "nl": "Lavendelblauw", - "es": "Azul lavanda" - }, - "fila_color": [ - "#6667ABFF" - ] - }, - { - "fila_color_code": "12102", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#515A6CFF" - ] - }, - { - "fila_color_code": "12103", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Silber", - "sv": "Silver", - "pt": "Prateado", - "ko": "실버", - "ja": "シルバー", - "en": "Silver", - "ru": "Серебристый", - "it": "Argento", - "fr": "Argenté", - "hu": "Ezüst", - "zh": "银色", - "nl": "Zilver", - "es": "Plateado" - }, - "fila_color": [ - "#898D8DFF" - ] - }, - { - "fila_color_code": "12500", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Tannengrün", - "sv": "Pinjegrön", - "pt": "Pinho Verde", - "ko": "파인 그린", - "ja": "パイン グリーン", - "en": "Pine Green", - "ru": "Зелёная сосна", - "it": "Verde pino", - "fr": "Vert pin", - "hu": "Fenyőzöld", - "zh": "松绿", - "nl": "Dennengroen", - "es": "Verde pino" - }, - "fila_color": [ - "#00482BFF" - ] - }, - { - "fila_color_code": "12101", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#25282AFF" - ] - }, - { - "fila_color_code": "12200", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Zinnoberrot", - "sv": "Vermilionröd", - "pt": "Vermelho Vermilion", - "ko": "버밀리언 레드", - "ja": "バーミリオン レッド", - "en": "Vermilion Red", - "ru": "Киноварь", - "it": "Rosso vermiglio", - "fr": "Rouge vermillon", - "hu": "Cinóbervörös", - "zh": "朱砂红", - "nl": "Vermiljoenrood", - "es": "Rojo bermellón" - }, - "fila_color": [ - "#DD3C22FF" - ] - }, - { - "fila_color_code": "12100", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#F9F7F4FF" - ] - }, - { - "fila_color_code": "12400", - "fila_id": "GFA09", - "fila_color_type": "单色", - "fila_type": "PLA Tough", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#FEDB00FF" - ] - }, - { - "fila_color_code": "14104", - "fila_id": "GFA11", - "fila_color_type": "单色", - "fila_type": "PLA Aero", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#CDCECAFF" - ] - }, - { - "fila_color_code": "14103", - "fila_id": "GFA11", - "fila_color_type": "单色", - "fila_type": "PLA Aero", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "14102", - "fila_id": "GFA11", - "fila_color_type": "单色", - "fila_type": "PLA Aero", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "15300", - "fila_id": "GFA12", - "fila_color_type": "单色", - "fila_type": "PLA Glow", - "fila_color_name": { - "de": "Leuchtend-Orange", - "sv": "Orange glöd", - "pt": "Brilho Laranja", - "ko": "글로우 오렌지", - "ja": "グロー オレンジ", - "en": "Glow Orange", - "ru": "Оранжевый", - "it": "Arancione fosforescente", - "fr": "Orange éclatant", - "hu": "Ragyogó narancssárga", - "zh": "夜光橙", - "nl": "Oranje gloed", - "es": "Naranja brillante" - }, - "fila_color": [ - "#FF9D5BFF" - ] - }, - { - "fila_color_code": "15600", - "fila_id": "GFA12", - "fila_color_type": "单色", - "fila_type": "PLA Glow", - "fila_color_name": { - "de": "Leuchtend-Blau", - "sv": "Blå glöd", - "pt": "Brilho Azul", - "ko": "글로우 블루", - "ja": "グロー ブルー", - "en": "Glow Blue", - "ru": "Синий", - "it": "Blu fosforescente", - "fr": "Bleu éclatant", - "hu": "Ragyogó kék", - "zh": "夜光蓝", - "nl": "Blauwe gloed", - "es": "Azul brillante" - }, - "fila_color": [ - "#7AC0E9FF" - ] - }, - { - "fila_color_code": "15500", - "fila_id": "GFA12", - "fila_color_type": "单色", - "fila_type": "PLA Glow", - "fila_color_name": { - "de": "Leuchtend-Grün", - "sv": "Grön glöd", - "pt": "Brilho Verde", - "ko": "글로우 그린", - "ja": "グロー グリーン", - "en": "Glow Green", - "ru": "Зелёный", - "it": "Verde fosforescente", - "fr": "Vert éclatant", - "hu": "Ragyogó zöld", - "zh": "夜光绿", - "nl": "Groene gloed", - "es": "Verde brillante" - }, - "fila_color": [ - "#A1FFACFF" - ] - }, - { - "fila_color_code": "15200", - "fila_id": "GFA12", - "fila_color_type": "单色", - "fila_type": "PLA Glow", - "fila_color_name": { - "de": "Leuchtend-Pink", - "sv": "Rosa glöd", - "pt": "Rosa Brilhante", - "ko": "글로우 핑크", - "ja": "グロー ピンク", - "en": "Glow Pink", - "ru": "Розовый", - "it": "Rosa fosforescente", - "fr": "Rose éclatant", - "hu": "Ragyogó rózsaszín", - "zh": "夜光粉", - "nl": "Roze gloed", - "es": "Rosa brillante" - }, - "fila_color": [ - "#F17B8FFF" - ] - }, - { - "fila_color_code": "15400", - "fila_id": "GFA12", - "fila_color_type": "单色", - "fila_type": "PLA Glow", - "fila_color_name": { - "de": "Leuchtend-Gelb", - "sv": "Gul glöd", - "pt": "Amarelo Brilhante", - "ko": "글로우 옐로우", - "ja": "グロー イエロー", - "en": "Glow Yellow", - "ru": "Жёлтый", - "it": "Giallo fosforescente", - "fr": "Jaune éclatant", - "hu": "Ragyogó sárga", - "zh": "夜光黄", - "nl": "Gele gloed", - "es": "Amarillo brillante" - }, - "fila_color": [ - "#F8FF80FF" - ] - }, - { - "fila_color_code": "15100", - "fila_id": "GFA13", - "fila_color_type": "单色", - "fila_type": "PLA Dynamic", - "fila_color_name": { - "de": "UV-Farbwechsel – Weiß nach Koralle", - "sv": "UV-toning - vit till korall", - "pt": "Mudança de cor UV — Branco para coral", - "ko": "UV 컬러 변경 - 화이트에서 코랄로", - "ja": "UV カラー チェンジ - ホワイトからコーラル", - "en": "UV Color Changing - White to Coral", - "ru": "Белый→коралловый (под ультрафиалетом)", - "it": "Cambia colore con l'esposizione ai raggi UV - Da bianco a corallo", - "fr": "Changement de couleur UV - Blanc à corail", - "hu": "UV-színváltó – fehérről korallra", - "zh": "光变-白变粉", - "nl": "UV-kleurverandering: wit naar koraal", - "es": "De blanco a coral (Cambia con los rayos UV)" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "13602", - "fila_id": "GFA15", - "fila_color_type": "单色", - "fila_type": "PLA Galaxy", - "fila_color_name": { - "de": "Lila", - "sv": "Lila", - "pt": "Roxo", - "ko": "퍼플", - "ja": "パープル", - "en": "Purple", - "ru": "Пурпурный", - "it": "Viola", - "fr": "Violet", - "hu": "Lila", - "zh": "星河紫", - "nl": "Paars", - "es": "Púrpura" - }, - "fila_color": [ - "#594177FF" - ] - }, - { - "fila_color_code": "13503", - "fila_id": "GFA15", - "fila_color_type": "单色", - "fila_type": "PLA Galaxy", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "星河绿", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#3B665EFF" - ] - }, - { - "fila_color_code": "13504", - "fila_id": "GFA15", - "fila_color_type": "单色", - "fila_type": "PLA Galaxy", - "fila_color_name": { - "de": "Nebel", - "sv": "Nebulosor", - "pt": "Nebulae", - "ko": "네뷸라", - "ja": "ネビュリー", - "en": "Nebulae", - "ru": "Туманность", - "it": "Nebula", - "fr": "Nébuleuse", - "hu": "Űrbéli ködök", - "zh": "星云色", - "nl": "Nevelig", - "es": "Nebulosa" - }, - "fila_color": [ - "#424379FF" - ] - }, - { - "fila_color_code": "13203", - "fila_id": "GFA15", - "fila_color_type": "单色", - "fila_type": "PLA Galaxy", - "fila_color_name": { - "de": "Braun", - "sv": "Brun", - "pt": "Marrom", - "ko": "브라운", - "ja": "ブラウン", - "en": "Brown", - "ru": "Коричневый", - "it": "Marrone", - "fr": "Marron", - "hu": "Barna", - "zh": "星河棕", - "nl": "Bruin", - "es": "Marrón" - }, - "fila_color": [ - "#684A43FF" - ] - }, - { - "fila_color_code": "13505", - "fila_id": "GFA16", - "fila_color_type": "单色", - "fila_type": "PLA Wood", - "fila_color_name": { - "de": "Klassische Birke", - "sv": "Klassisk björk", - "pt": "Classic Birch", - "ko": "클래식 버치", - "ja": "クラシック バーチ", - "en": "Classic Birch", - "ru": "Берёза", - "it": "Betulla", - "fr": "Bouleau classique", - "hu": "Klasszikus nyírfa", - "zh": "经典桦木", - "nl": "Klassieke berk", - "es": "Abedul clásico" - }, - "fila_color": [ - "#918669FF" - ] - }, - { - "fila_color_code": "13107", - "fila_id": "GFA16", - "fila_color_type": "单色", - "fila_type": "PLA Wood", - "fila_color_name": { - "de": "Schwarze Walnuss", - "sv": "Svart valnöt", - "pt": "Noz preta", - "ko": "블랙 월넛", - "ja": "ブラック ウォールナット", - "en": "Black Walnut", - "ru": "Чёрный орех", - "it": "Noce nero", - "fr": "Noyer noir", - "hu": "Fekete dió", - "zh": "黑胡桃", - "nl": "Walnootzwart", - "es": "Nogal negro" - }, - "fila_color": [ - "#4F3F24FF" - ] - }, - { - "fila_color_code": "13801", - "fila_id": "GFA16", - "fila_color_type": "单色", - "fila_type": "PLA Wood", - "fila_color_name": { - "de": "Lehmbraun", - "sv": "Lerbrun", - "pt": "Clay Brown", - "ko": "클레이 브라운", - "ja": "クレイ ブラウン", - "en": "Clay Brown", - "ru": "Коричневая глина", - "it": "Marrone argilla", - "fr": "Marron argile", - "hu": "Agyagbarna", - "zh": "陶土褐", - "nl": "Modderbruin", - "es": "Marrón arcilla" - }, - "fila_color": [ - "#995F11FF" - ] - }, - { - "fila_color_code": "13204", - "fila_id": "GFA16", - "fila_color_type": "单色", - "fila_type": "PLA Wood", - "fila_color_name": { - "de": "Rosenholz", - "sv": "Rosenträ", - "pt": "Jacarandá", - "ko": "로즈우드", - "ja": "ローズウッド", - "en": "Rosewood", - "ru": "Палисандр", - "it": "Palissandro", - "fr": "Palissandre", - "hu": "Rózsafa", - "zh": "红木", - "nl": "Rozenhout", - "es": "Palo de rosa" - }, - "fila_color": [ - "#4C241CFF" - ] - }, - { - "fila_color_code": "13106", - "fila_id": "GFA16", - "fila_color_type": "单色", - "fila_type": "PLA Wood", - "fila_color_name": { - "de": "Weiße Eiche", - "sv": "Vit ek", - "pt": "Carvalho Branco", - "ko": "화이트 오크", - "ja": "ホワイト オーク", - "en": "White Oak", - "ru": "Белый дуб", - "it": "Rovere bianco", - "fr": "Chêne blanc", - "hu": "Fehér tölgy", - "zh": "白橡木", - "nl": "Wit eiken", - "es": "Roble blanco" - }, - "fila_color": [ - "#D6CCA3FF" - ] - }, - { - "fila_color_code": "13403", - "fila_id": "GFA16", - "fila_color_type": "单色", - "fila_type": "PLA Wood", - "fila_color_name": { - "de": "Ockergelb", - "sv": "Ockragul", - "pt": "Amarelo-ocre", - "ko": "오커 옐로우", - "ja": "オーカー イエロー", - "en": "Ochre Yellow", - "ru": "Охра", - "it": "Giallo ocra", - "fr": "Jaune ocre", - "hu": "Okkersárga", - "zh": "赭石黄", - "nl": "Okergeel", - "es": "Amarillo ocre" - }, - "fila_color": [ - "#C98935FF" - ] - }, - { - "fila_color_code": "14601", - "fila_id": "GFA50", - "fila_color_type": "单色", - "fila_type": "PLA-CF", - "fila_color_name": { - "de": "Königsblau", - "sv": "Kungsblå", - "pt": "Azul Royal", - "ko": "로얄 블루", - "ja": "ロイヤル ブルー", - "en": "Royal Blue", - "ru": "Королевский синий", - "it": "Blu royal", - "fr": "Bleu royal", - "hu": "Királykék", - "zh": "皇家蓝", - "nl": "Koningsblauw", - "es": "Azul real" - }, - "fila_color": [ - "#2842ADFF" - ] - }, - { - "fila_color_code": "14600", - "fila_id": "GFA50", - "fila_color_type": "单色", - "fila_type": "PLA-CF", - "fila_color_name": { - "de": "Jeansblau", - "sv": "Jeansblå", - "pt": "Jeans Azul", - "ko": "진 블루", - "ja": "ジーンズ ブルー", - "en": "Jeans Blue", - "ru": "Джинсовый", - "it": "Blu jeans", - "fr": "Jean bleu", - "hu": "Farmerkék", - "zh": "牛仔蓝", - "nl": "Jeansblauw", - "es": "Azul vaquero" - }, - "fila_color": [ - "#6e88bcFF" - ] - }, - { - "fila_color_code": "14101", - "fila_id": "GFA50", - "fila_color_type": "单色", - "fila_type": "PLA-CF", - "fila_color_name": { - "de": "Lava-Grau", - "sv": "Lavagrå", - "pt": "Lava Cinza", - "ko": "라바 그레이", - "ja": "ラバ グレー", - "en": "Lava Gray", - "ru": "Лавово-серый", - "it": "Grigio lava", - "fr": "Gris lave", - "hu": "Lávaszürke", - "zh": "熔岩灰", - "nl": "Lavagrijs", - "es": "Gris lava" - }, - "fila_color": [ - "#4d5054FF" - ] - }, - { - "fila_color_code": "14500", - "fila_id": "GFA50", - "fila_color_type": "单色", - "fila_type": "PLA-CF", - "fila_color_name": { - "de": "Matcha-Grün", - "sv": "Matchagrön", - "pt": "Matcha Green", - "ko": "마차 그린", - "ja": "抹茶グリーン", - "en": "Matcha Green", - "ru": "Зелёный чай", - "it": "Verde matcha", - "fr": "Vert matcha", - "hu": "Matchazöld", - "zh": "抹茶绿", - "nl": "Matchagroen", - "es": "Verde matcha" - }, - "fila_color": [ - "#5c9748FF" - ] - }, - { - "fila_color_code": "14100", - "fila_id": "GFA50", - "fila_color_type": "单色", - "fila_type": "PLA-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "14700", - "fila_id": "GFA50", - "fila_color_type": "单色", - "fila_type": "PLA-CF", - "fila_color_name": { - "de": "Iris-Violett", - "sv": "Irislila", - "pt": "Íris Roxa", - "ko": "아이리스 퍼플", - "ja": "アイリス パープル", - "en": "Iris Purple", - "ru": "Фиолетовый ирис", - "it": "Viola iris", - "fr": "Violet iris", - "hu": "Íriszlila", - "zh": "鸢尾花紫", - "nl": "Irispaars", - "es": "Púrpura iris" - }, - "fila_color": [ - "#69398EFF" - ] - }, - { - "fila_color_code": "14200", - "fila_id": "GFA50", - "fila_color_type": "单色", - "fila_type": "PLA-CF", - "fila_color_name": { - "de": "Burgunderrot", - "sv": "Vinröd", - "pt": "Burgundy Red", - "ko": "버건디 레드", - "ja": "バーガンディ レッド", - "en": "Burgundy Red", - "ru": "Красное вино", - "it": "Rosso borgogna", - "fr": "Rouge bordeaux", - "hu": "Bordó-vörös", - "zh": "勃艮第红", - "nl": "Wijnrood", - "es": "Rojo burdeos" - }, - "fila_color": [ - "#951e23FF" - ] - }, - { - "fila_color_code": "40300", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Orange", - "sv": "Orange", - "pt": "Laranja", - "ko": "오렌지", - "ja": "オレンジ", - "en": "Orange", - "ru": "Оранжевый", - "it": "Arancione", - "fr": "Orange", - "hu": "Narancssárga", - "zh": "橙色", - "nl": "Oranje", - "es": "Naranja" - }, - "fila_color": [ - "#FF6A13FF" - ] - }, - { - "fila_color_code": "40600", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#0A2CA5FF" - ] - }, - { - "fila_color_code": "40601", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Azurblau", - "sv": "Azurblå", - "pt": "Azure", - "ko": "애저", - "ja": "アズール", - "en": "Azure", - "ru": "Лазурь", - "it": "Azzurro", - "fr": "Bleu azur", - "hu": "Azúr", - "zh": "天蓝色", - "nl": "Azuurblauw", - "es": "Azul celeste" - }, - "fila_color": [ - "#489FDFFF" - ] - }, - { - "fila_color_code": "40602", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Marineblau", - "sv": "Marinblå", - "pt": "Azul-marinho", - "ko": "네이비 블루", - "ja": "ネイビー ブルー", - "en": "Navy Blue", - "ru": "Тёмно-синий", - "it": "Blu navy", - "fr": "Bleu marine", - "hu": "Tengerészkék", - "zh": "藏青色", - "nl": "Marineblauw", - "es": "Azul marino oscuro" - }, - "fila_color": [ - "#0C2340FF" - ] - }, - { - "fila_color_code": "40501", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Minze", - "sv": "Mint", - "pt": "Menta", - "ko": "민트", - "ja": "ミント", - "en": "Mint", - "ru": "Мятный", - "it": "Menta", - "fr": "Menthe", - "hu": "Menta", - "zh": "青色", - "nl": "Munt", - "es": "Menta" - }, - "fila_color": [ - "#7AE1BFFF" - ] - }, - { - "fila_color_code": "40102", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Silber", - "sv": "Silver", - "pt": "Prateado", - "ko": "실버", - "ja": "シルバー", - "en": "Silver", - "ru": "Серебристый", - "it": "Argento", - "fr": "Argenté", - "hu": "Ezüst", - "zh": "银色", - "nl": "Zilver", - "es": "Plateado" - }, - "fila_color": [ - "#87909AFF" - ] - }, - { - "fila_color_code": "40500", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Bambusgrün", - "sv": "Bambugrön", - "pt": "Verde-bambu", - "ko": "뱀부 그린", - "ja": "バンブー グリーン", - "en": "Bambu Green", - "ru": "Зелёный бамбук", - "it": "Verde bambù", - "fr": "Vert bambou", - "hu": "Bambu-zöld", - "zh": "拓竹绿", - "nl": "Bamboegroen", - "es": "Verde bambú" - }, - "fila_color": [ - "#00AE42FF" - ] - }, - { - "fila_color_code": "40502", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Olive", - "sv": "Oliv", - "pt": "Olive", - "ko": "올리브", - "ja": "オリーブ", - "en": "Olive", - "ru": "Оливковый", - "it": "Oliva", - "fr": "Olive", - "hu": "Olivazöld", - "zh": "橄榄绿", - "nl": "Olijf", - "es": "Oliva" - }, - "fila_color": [ - "#789D4AFF" - ] - }, - { - "fila_color_code": "40101", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "40701", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Lavendel", - "sv": "Lavendel", - "pt": "Lavanda", - "ko": "라벤더", - "ja": "ラベンダー", - "en": "Lavender", - "ru": "Лавандовый", - "it": "Lavanda", - "fr": "Lavande", - "hu": "Levendula", - "zh": "薰衣草紫", - "nl": "Lavendel", - "es": "Lavanda" - }, - "fila_color": [ - "#7248BDFF" - ] - }, - { - "fila_color_code": "40700", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Lila", - "sv": "Lila", - "pt": "Roxo", - "ko": "퍼플", - "ja": "パープル", - "en": "Purple", - "ru": "Пурпурный", - "it": "Viola", - "fr": "Violet", - "hu": "Lila", - "zh": "紫色", - "nl": "Paars", - "es": "Púrpura" - }, - "fila_color": [ - "#AF1685FF" - ] - }, - { - "fila_color_code": "40200", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#D32941FF" - ] - }, - { - "fila_color_code": "40100", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "40400", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#FCE900FF" - ] - }, - { - "fila_color_code": "40402", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Mandarinengelb", - "sv": "Mandaringul", - "pt": "Amarelo Tangerina", - "ko": "탠저린 옐로우", - "ja": "タンジェリン イエロー", - "en": "Tangerine Yellow", - "ru": "Мандариновый", - "it": "Giallo tangerine", - "fr": "Jaune mandarine", - "hu": "Tangerin", - "zh": "橘黄", - "nl": "Feloranjegeel", - "es": "Amarillo mandarina" - }, - "fila_color": [ - "#FFC72CFF" - ] - }, - { - "fila_color_code": "40401", - "fila_id": "GFB00", - "fila_color_type": "单色", - "fila_type": "ABS", - "fila_color_name": { - "de": "Beige", - "sv": "Beige", - "pt": "Bege", - "ko": "베이지", - "ja": "ベージュ", - "en": "Beige", - "ru": "Бежевый", - "it": "Beige", - "fr": "Beige", - "hu": "Bézs", - "zh": "卡其色", - "nl": "Beige", - "es": "Beis" - }, - "fila_color": [ - "#DFD1A7FF" - ] - }, - { - "fila_color_code": "45600", - "fila_id": "GFB01", - "fila_color_type": "单色", - "fila_type": "ASA", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#2140B4FF" - ] - }, - { - "fila_color_code": "45102", - "fila_id": "GFB01", - "fila_color_type": "单色", - "fila_type": "ASA", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#8A949EFF" - ] - }, - { - "fila_color_code": "45500", - "fila_id": "GFB01", - "fila_color_type": "单色", - "fila_type": "ASA", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "绿色", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#00A6A0FF" - ] - }, - { - "fila_color_code": "45101", - "fila_id": "GFB01", - "fila_color_type": "单色", - "fila_type": "ASA", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "45200", - "fila_id": "GFB01", - "fila_color_type": "单色", - "fila_type": "ASA", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#E02928FF" - ] - }, - { - "fila_color_code": "45100", - "fila_id": "GFB01", - "fila_color_type": "单色", - "fila_type": "ASA", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFAF2FF" - ] - }, - { - "fila_color_code": "46100", - "fila_id": "GFB02", - "fila_color_type": "单色", - "fila_type": "ASA Aero", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#F5F1DDFF" - ] - }, - { - "fila_color_code": "41300", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Orange", - "sv": "Orange", - "pt": "Laranja", - "ko": "오렌지", - "ja": "オレンジ", - "en": "Orange", - "ru": "Оранжевый", - "it": "Arancione", - "fr": "Orange", - "hu": "Narancssárga", - "zh": "橙色", - "nl": "Oranje", - "es": "Naranja" - }, - "fila_color": [ - "#F48438FF" - ] - }, - { - "fila_color_code": "41600", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#0C3B95FF" - ] - }, - { - "fila_color_code": "41102", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#C6C6C6FF" - ] - }, - { - "fila_color_code": "41500", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "绿色", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#61BF36FF" - ] - }, - { - "fila_color_code": "41101", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "41200", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#E83100FF" - ] - }, - { - "fila_color_code": "41100", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "41400", - "fila_id": "GFB50", - "fila_color_type": "单色", - "fila_type": "ABS-GF", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#FFE133FF" - ] - }, - { - "fila_color_code": "46101", - "fila_id": "GFB51", - "fila_color_type": "单色", - "fila_type": "ASA-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "60102", - "fila_id": "GFC00", - "fila_color_type": "单色", - "fila_type": "PC", - "fila_color_name": { - "de": "Klares Schwarz", - "sv": "Klar svart", - "pt": "Preto-claro", - "ko": "클리어 블랙", - "ja": "クリア ブラック", - "en": "Clear Black", - "ru": "Чистый чёрный", - "it": "Nero trasparente", - "fr": "Noir transparent", - "hu": "Tiszta fekete", - "zh": "透明黑", - "nl": "Helder zwart", - "es": "Negro transparente" - }, - "fila_color": [ - "#00000080" - ] - }, - { - "fila_color_code": "60103", - "fila_id": "GFC00", - "fila_color_type": "单色", - "fila_type": "PC", - "fila_color_name": { - "de": "Durchsichtig", - "sv": "Genomskinlig", - "pt": "Transparente", - "ko": "투명", - "ja": "トランスペアレント", - "en": "Transparent", - "ru": "Прозрачный", - "it": "Trasparente", - "fr": "Transparent", - "hu": "Áttetsző", - "zh": "透明", - "nl": "Transparant", - "es": "Translúcido" - }, - "fila_color": [ - "#FFFFFF00" - ] - }, - { - "fila_color_code": "60101", - "fila_id": "GFC00", - "fila_color_type": "单色", - "fila_type": "PC", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#686865FF" - ] - }, - { - "fila_color_code": "60100", - "fila_id": "GFC00", - "fila_color_type": "单色", - "fila_type": "PC", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "63102", - "fila_id": "GFC01", - "fila_color_type": "单色", - "fila_type": "PC FR", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#A8A8AAFF" - ] - }, - { - "fila_color_code": "63100", - "fila_id": "GFC01", - "fila_color_type": "单色", - "fila_type": "PC FR", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "63101", - "fila_id": "GFC01", - "fila_color_type": "单色", - "fila_type": "PC FR", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "30300", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Orange", - "sv": "Orange", - "pt": "Laranja", - "ko": "오렌지", - "ja": "オレンジ", - "en": "Orange", - "ru": "Оранжевый", - "it": "Arancione", - "fr": "Orange", - "hu": "Narancssárga", - "zh": "橙色", - "nl": "Oranje", - "es": "Naranja" - }, - "fila_color": [ - "#FF671FFF" - ] - }, - { - "fila_color_code": "30602", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Blauer See", - "sv": "Sjöblå", - "pt": "Lago Azul", - "ko": "레이크 블루", - "ja": "レイク ブルー", - "en": "Lake Blue", - "ru": "Голубой", - "it": "Blu lago", - "fr": "Bleu lac", - "hu": "Vízkék", - "zh": "湖蓝", - "nl": "Meerblauw", - "es": "Azul Lago" - }, - "fila_color": [ - "#0069B1FF" - ] - }, - { - "fila_color_code": "30601", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Blau-Grau", - "sv": "Blågrå", - "pt": "Azul-Cinza", - "ko": "블루 그레이", - "ja": "ブルー グレー", - "en": "Blue Gray", - "ru": "Сизый", - "it": "Grigio blu", - "fr": "Bleu gris", - "hu": "Kékesszürke", - "zh": "灰蓝", - "nl": "Blauwgrijs", - "es": "Gris azulado" - }, - "fila_color": [ - "#688197FF" - ] - }, - { - "fila_color_code": "30700", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Lila", - "sv": "Lila", - "pt": "Roxo", - "ko": "퍼플", - "ja": "パープル", - "en": "Purple", - "ru": "Пурпурный", - "it": "Viola", - "fr": "Violet", - "hu": "Lila", - "zh": "紫色", - "nl": "Paars", - "es": "Púrpura" - }, - "fila_color": [ - "#9E007EFF" - ] - }, - { - "fila_color_code": "30600", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#001489FF" - ] - }, - { - "fila_color_code": "30103", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Durchsichtig", - "sv": "Genomskinlig", - "pt": "Transparente", - "ko": "투명", - "ja": "トランスペアレント", - "en": "Transparent", - "ru": "Прозрачный", - "it": "Trasparente", - "fr": "Transparent", - "hu": "Áttetsző", - "zh": "透明", - "nl": "Transparant", - "es": "Translúcido" - }, - "fila_color": [ - "#FFFFFF00" - ] - }, - { - "fila_color_code": "30102", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#9EA2A2FF" - ] - }, - { - "fila_color_code": "30500", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "绿色", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#009639FF" - ] - }, - { - "fila_color_code": "30501", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Limettengrün", - "sv": "Limegrön", - "pt": "Verde-limão", - "ko": "라임 그린", - "ja": "ライム グリーン", - "en": "Lime Green", - "ru": "Салатовый", - "it": "Verde lime", - "fr": "Vert citron", - "hu": "Limezöld", - "zh": "柠檬绿", - "nl": "Limoengroen", - "es": "Verde lima" - }, - "fila_color": [ - "#7CD82BFF" - ] - }, - { - "fila_color_code": "30101", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "30200", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#D6001CFF" - ] - }, - { - "fila_color_code": "30100", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "30104", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Natur", - "sv": "Natur", - "pt": "Natureza", - "ko": "네이처", - "ja": "ネイチャー", - "en": "Nature", - "ru": "Естественный", - "it": "Naturale", - "fr": "Nature", - "hu": "Natúr", - "zh": "自然色", - "nl": "Natuurlijk", - "es": "Naturaleza" - }, - "fila_color": [ - "#F9F7F2FF" - ] - }, - { - "fila_color_code": "30400", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#FCE300FF" - ] - }, - { - "fila_color_code": "30401", - "fila_id": "GFG00", - "fila_color_type": "单色", - "fila_type": "PETG Basic", - "fila_color_name": { - "de": "Gold", - "sv": "Guld", - "pt": "Dourado", - "ko": "골드", - "ja": "ゴールド", - "en": "Gold", - "ru": "Золотистый", - "it": "Oro", - "fr": "Doré", - "hu": "Arany", - "zh": "金色", - "nl": "Goud", - "es": "Dorado" - }, - "fila_color": [ - "#B28B33FF" - ] - }, - { - "fila_color_code": "32300", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Orange", - "sv": "Genomskinlig orange", - "pt": "Laranja Translúcido", - "ko": "반투명 오렌지", - "ja": "トランスルーセント オレンジ", - "en": "Translucent Orange", - "ru": "Оранжевый", - "it": "Arancione traslucido", - "fr": "Orange translucide", - "hu": "Áttetsző narancssárga", - "zh": "透明橘", - "nl": "Doorschijnend oranje", - "es": "Naranja translúcido" - }, - "fila_color": [ - "#FF911A80" - ] - }, - { - "fila_color_code": "32600", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Hellblau", - "sv": "Genomskinlig ljusblå", - "pt": "Azul-claro Translúcido", - "ko": "반투명 라이트 블루", - "ja": "トランスルーセント ライト ブルー", - "en": "Translucent Light Blue", - "ru": "Голубой", - "it": "Azzurro traslucido", - "fr": "Bleu clair translucide", - "hu": "Áttetsző világoskék", - "zh": "透明浅蓝", - "nl": "Doorschijnend lichtblauw", - "es": "Azul claro translúcido" - }, - "fila_color": [ - "#61B0FF80" - ] - }, - { - "fila_color_code": "32101", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Klar", - "sv": "Klar", - "pt": "Claro", - "ko": "클리어", - "ja": "クリア", - "en": "Clear", - "ru": "Чистый", - "it": "Trasparente", - "fr": "Transparent", - "hu": "Átlátszó", - "zh": "透明", - "nl": "Helder", - "es": "Transparente" - }, - "fila_color": [ - "#FFFFFF00" - ] - }, - { - "fila_color_code": "32100", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Grau", - "sv": "Genomskinlig grå", - "pt": "Cinza Translúcido", - "ko": "반투명 그레이", - "ja": "トランスルーセント グレー", - "en": "Translucent Gray", - "ru": "Серый", - "it": "Grigio traslucido", - "fr": "Gris translucide", - "hu": "Áttetsző szürke", - "zh": "透明灰", - "nl": "Doorschijnend grijs", - "es": "Gris translúcido" - }, - "fila_color": [ - "#8E8E8E80" - ] - }, - { - "fila_color_code": "32500", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Olivgrün", - "sv": "Genomskinlig oliv", - "pt": "Oliva Translúcido", - "ko": "반투명 올리브", - "ja": "トランスルーセント オリーブ", - "en": "Translucent Olive", - "ru": "Оливковый", - "it": "Oliva traslucido", - "fr": "Olive translucide", - "hu": "Áttetsző olivazöld", - "zh": "透明橄榄绿", - "nl": "Doorschijnend olijf", - "es": "Oliva translúcido" - }, - "fila_color": [ - "#748C4580" - ] - }, - { - "fila_color_code": "32501", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Blaugrün", - "sv": "Genomskinlig teal", - "pt": "Azul-petróleo Translúcido", - "ko": "반투명 틸", - "ja": "トランスルーセント ティール", - "en": "Translucent Teal", - "ru": "Морской", - "it": "Verde petrolio traslucido", - "fr": "Bleu sarcelle translucide", - "hu": "Áttetsző kékeszöld", - "zh": "透明浅绿", - "nl": "Doorschijnend blauwgroen", - "es": "Verde azulado translúcido" - }, - "fila_color": [ - "#77EDD780" - ] - }, - { - "fila_color_code": "32800", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Braun", - "sv": "Genomskinlig brun", - "pt": "Marrom Translúcido", - "ko": "반투명 브라운", - "ja": "トランスルーセント ブラウン", - "en": "Translucent Brown", - "ru": "Коричневый", - "it": "Marrone traslucido", - "fr": "Marron translucide", - "hu": "Áttetsző barna", - "zh": "透明茶色", - "nl": "Doorschijnend bruin", - "es": "Marrón translúcido" - }, - "fila_color": [ - "#C9A38180" - ] - }, - { - "fila_color_code": "32700", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Lila", - "sv": "Genomskinlig lila", - "pt": "Roxo Translúcido", - "ko": "반투명 퍼플", - "ja": "トランスルーセント パープル", - "en": "Translucent Purple", - "ru": "Фиолетовый", - "it": "Viola traslucido", - "fr": "Violet translucide", - "hu": "Áttetsző lila", - "zh": "透明紫", - "nl": "Doorschijnend paars", - "es": "Púrpura translúcido" - }, - "fila_color": [ - "#D6ABFF80" - ] - }, - { - "fila_color_code": "32200", - "fila_id": "GFG01", - "fila_color_type": "单色", - "fila_type": "PETG Translucent", - "fila_color_name": { - "de": "Durchsichtiges Pink", - "sv": "Genomskinlig rosa", - "pt": "Rosa Translúcido", - "ko": "반투명 핑크", - "ja": "トランスルーセント ピンク", - "en": "Translucent Pink", - "ru": "Розовый", - "it": "Rosa traslucido", - "fr": "Rose translucide", - "hu": "Áttetsző rózsaszín", - "zh": "透明粉", - "nl": "Doorschijnend roze", - "es": "Rosa translúcido" - }, - "fila_color": [ - "#F9C1BD80" - ] - }, - { - "fila_color_code": "33300", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Orange", - "sv": "Orange", - "pt": "Laranja", - "ko": "오렌지", - "ja": "オレンジ", - "en": "Orange", - "ru": "Оранжевый", - "it": "Arancione", - "fr": "Orange", - "hu": "Narancssárga", - "zh": "橙色", - "nl": "Oranje", - "es": "Naranja" - }, - "fila_color": [ - "#F75403FF" - ] - }, - { - "fila_color_code": "33600", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#002E96FF" - ] - }, - { - "fila_color_code": "33601", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Blauer See", - "sv": "Sjöblå", - "pt": "Lago Azul", - "ko": "레이크 블루", - "ja": "レイク ブルー", - "en": "Lake Blue", - "ru": "Голубой", - "it": "Blu lago", - "fr": "Bleu lac", - "hu": "Vízkék", - "zh": "湖蓝", - "nl": "Meerblauw", - "es": "Azul Lago" - }, - "fila_color": [ - "#1F79E5FF" - ] - }, - { - "fila_color_code": "33101", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#ADB1B2FF" - ] - }, - { - "fila_color_code": "33103", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Dunkelgrau", - "sv": "Mörkgrå", - "pt": "Cinza-escuro", - "ko": "다크 그레이", - "ja": "ダーク グレー", - "en": "Dark Gray", - "ru": "Тёмно-серый", - "it": "Grigio scuro", - "fr": "Gris foncé", - "hu": "Sötétszürke", - "zh": "深灰", - "nl": "Donkergrijs", - "es": "Gris oscuro" - }, - "fila_color": [ - "#515151FF" - ] - }, - { - "fila_color_code": "33500", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "绿色", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#00AE42FF" - ] - }, - { - "fila_color_code": "33501", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Limettengrün", - "sv": "Limegrön", - "pt": "Verde-limão", - "ko": "라임 그린", - "ja": "ライム グリーン", - "en": "Lime Green", - "ru": "Салатовый", - "it": "Verde lime", - "fr": "Vert citron", - "hu": "Limezöld", - "zh": "柠檬绿", - "nl": "Limoengroen", - "es": "Verde lima" - }, - "fila_color": [ - "#6EE53CFF" - ] - }, - { - "fila_color_code": "33502", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Waldgrün", - "sv": "Skogsgrön", - "pt": "Verde-floresta", - "ko": "포레스트 그린", - "ja": "フォレスト グリーン", - "en": "Forest Green", - "ru": "Лесной зелёный", - "it": "Verde foresta", - "fr": "Vert forêt", - "hu": "Erdőzöld", - "zh": "丛林绿", - "nl": "Bosgroen", - "es": "Verde bosque" - }, - "fila_color": [ - "#39541AFF" - ] - }, - { - "fila_color_code": "33102", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "33801", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Erdnussbraun", - "sv": "Jordnötsbrun", - "pt": "Peanut Brown", - "ko": "피넛 브라운", - "ja": "ピーナッツ ブラウン", - "en": "Peanut Brown", - "ru": "Ореховый", - "it": "Cognac", - "fr": "Marron cacahuète", - "hu": "Mogyoróbarna", - "zh": "花生棕", - "nl": "Pindabruin", - "es": "Marrón cacahuete" - }, - "fila_color": [ - "#875718FF" - ] - }, - { - "fila_color_code": "33200", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#BC0900FF" - ] - }, - { - "fila_color_code": "33100", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "33400", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#FFD00BFF" - ] - }, - { - "fila_color_code": "33401", - "fila_id": "GFG02", - "fila_color_type": "单色", - "fila_type": "PETG HF", - "fila_color_name": { - "de": "Creme", - "sv": "Cremevit", - "pt": "Creme", - "ko": "크림", - "ja": "クリーム", - "en": "Cream", - "ru": "Кремовый", - "it": "Panna", - "fr": "Crème", - "hu": "Törtfehér", - "zh": "奶油白", - "nl": "Roomkleurig", - "es": "Crema" - }, - "fila_color": [ - "#F9DFB9FF" - ] - }, - { - "fila_color_code": "31600", - "fila_id": "GFG50", - "fila_color_type": "单色", - "fila_type": "PETG-CF", - "fila_color_name": { - "de": "Indigo-Blau", - "sv": "Indigoblå", - "pt": "Indigo Blue", - "ko": "인디고 블루", - "ja": "インディゴ ブルー", - "en": "Indigo Blue", - "ru": "Индиго", - "it": "Blu indaco", - "fr": "Bleu indigo", - "hu": "Indigókék", - "zh": "靛蓝色", - "nl": "Indigoblauw", - "es": "Azul índigo" - }, - "fila_color": [ - "#324585FF" - ] - }, - { - "fila_color_code": "31101", - "fila_id": "GFG50", - "fila_color_type": "单色", - "fila_type": "PETG-CF", - "fila_color_name": { - "de": "Titangrau", - "sv": "Titangrå", - "pt": "Titan Gray", - "ko": "타이탄 그레이", - "ja": "チタン グレー", - "en": "Titan Gray", - "ru": "Титановый", - "it": "Grigio titanio", - "fr": "Gris titane", - "hu": "Titánszürke", - "zh": "钛灰色", - "nl": "Titaangrijs", - "es": "Gris titán" - }, - "fila_color": [ - "#565656FF" - ] - }, - { - "fila_color_code": "31500", - "fila_id": "GFG50", - "fila_color_type": "单色", - "fila_type": "PETG-CF", - "fila_color_name": { - "de": "Malachitgrün", - "sv": "Malakitgrön", - "pt": "Verde Malaquita", - "ko": "말라카이트 그린", - "ja": "マラカイト グリーン", - "en": "Malachite Green", - "ru": "Малахитовый", - "it": "Verde malachite", - "fr": "Vert malachite", - "hu": "Malachitzöld", - "zh": "孔雀绿", - "nl": "Malachietgroen", - "es": "Verde malaquita" - }, - "fila_color": [ - "#16b08eFF" - ] - }, - { - "fila_color_code": "31100", - "fila_id": "GFG50", - "fila_color_type": "单色", - "fila_type": "PETG-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "31700", - "fila_id": "GFG50", - "fila_color_type": "单色", - "fila_type": "PETG-CF", - "fila_color_name": { - "de": "Lila-Violett", - "sv": "Violettlila", - "pt": "Violeta Roxo", - "ko": "바이올렛 퍼플", - "ja": "バイオレット パープル", - "en": "Violet Purple", - "ru": "Фиолетовый", - "it": "Viola", - "fr": "Violet pourpre", - "hu": "Viola", - "zh": "紫罗兰色", - "nl": "Violetpaars", - "es": "Violeta púrpura" - }, - "fila_color": [ - "#583061FF" - ] - }, - { - "fila_color_code": "31200", - "fila_id": "GFG50", - "fila_color_type": "单色", - "fila_type": "PETG-CF", - "fila_color_name": { - "de": "Ziegelrot", - "sv": "Tegelröd", - "pt": "Vermelho Tijolo", - "ko": "브릭 레드", - "ja": "ブリック レッド", - "en": "Brick Red", - "ru": "Кирпичный", - "it": "Rosso mattone", - "fr": "Rouge brique", - "hu": "Téglavörös", - "zh": "砖红色", - "nl": "Steenrood", - "es": "Rojo ladrillo" - }, - "fila_color": [ - "#9f332aFF" - ] - }, - { - "fila_color_code": "70100", - "fila_id": "GFN04", - "fila_color_type": "单色", - "fila_type": "PAHT-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "72100", - "fila_id": "GFN05", - "fila_color_type": "单色", - "fila_type": "PA6-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "73100", - "fila_id": "GFN06", - "fila_color_type": "单色", - "fila_type": "PPA-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "72600", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#75AED8FF" - ] - }, - { - "fila_color_code": "72102", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#EAEAE4FF" - ] - }, - { - "fila_color_code": "72103", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#353533FF" - ] - }, - { - "fila_color_code": "72500", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Limette", - "sv": "Lime", - "pt": "Lima", - "ko": "라임", - "ja": "ライム", - "en": "Lime", - "ru": "Салатовый", - "it": "Lime", - "fr": "Citron vert", - "hu": "Lime", - "zh": "柠檬绿", - "nl": "Limoen", - "es": "Lima" - }, - "fila_color": [ - "#C5ED48FF" - ] - }, - { - "fila_color_code": "72104", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "72800", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Braun", - "sv": "Brun", - "pt": "Marrom", - "ko": "브라운", - "ja": "ブラウン", - "en": "Brown", - "ru": "Коричневый", - "it": "Marrone", - "fr": "Marron", - "hu": "Barna", - "zh": "棕色", - "nl": "Bruin", - "es": "Marrón" - }, - "fila_color": [ - "#5B492FFF" - ] - }, - { - "fila_color_code": "72200", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Orange", - "sv": "Orange", - "pt": "Laranja", - "ko": "오렌지", - "ja": "オレンジ", - "en": "Orange", - "ru": "Оранжевый", - "it": "Arancione", - "fr": "Orange", - "hu": "Narancssárga", - "zh": "橙色", - "nl": "Oranje", - "es": "Naranja" - }, - "fila_color": [ - "#FF4800FF" - ] - }, - { - "fila_color_code": "72400", - "fila_id": "GFN08", - "fila_color_type": "单色", - "fila_type": "PA6-GF", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#FFCE00FF" - ] - }, - { - "fila_color_code": "65101", - "fila_id": "GFS02", - "fila_color_type": "单色", - "fila_type": "Support for PLA", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "65100", - "fila_id": "GFS02", - "fila_color_type": "单色", - "fila_type": "Support for PLA", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "65500", - "fila_id": "GFS03", - "fila_color_type": "单色", - "fila_type": "Support for PA/PET", - "fila_color_name": { - "de": "Grün", - "sv": "Grön", - "pt": "Verde", - "ko": "그린", - "ja": "グリーン", - "en": "Green", - "ru": "Зелёный", - "it": "Verde", - "fr": "Vert", - "hu": "Zöld", - "zh": "绿色", - "nl": "Groen", - "es": "Verde" - }, - "fila_color": [ - "#C0DF16FF" - ] - }, - { - "fila_color_code": "66400", - "fila_id": "GFS04", - "fila_color_type": "单色", - "fila_type": "PVA", - "fila_color_name": { - "de": "Klar", - "sv": "Klar", - "pt": "Claro", - "ko": "클리어", - "ja": "クリア", - "en": "Clear", - "ru": "Чистый", - "it": "Trasparente", - "fr": "Transparent", - "hu": "Átlátszó", - "zh": "透明浅黄色", - "nl": "Helder", - "es": "Transparente" - }, - "fila_color": [ - "#F0F1A880" - ] - }, - { - "fila_color_code": "65102", - "fila_id": "GFS05", - "fila_color_type": "单色", - "fila_type": "Support for PLA/PETG", - "fila_color_name": { - "de": "Natur", - "sv": "Natur", - "pt": "Natureza", - "ko": "네이처", - "ja": "ネイチャー", - "en": "Nature", - "ru": "Естественный", - "it": "Naturale", - "fr": "Nature", - "hu": "Natúr", - "zh": "半透明", - "nl": "Natuurlijk", - "es": "Naturaleza" - }, - "fila_color": [ - "#00000000" - ] - }, - { - "fila_color_code": "65103", - "fila_id": "GFS05", - "fila_color_type": "单色", - "fila_type": "Support for PLA/PETG", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "66100", - "fila_id": "GFS06", - "fila_color_type": "单色", - "fila_type": "Support for ABS", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "71100", - "fila_id": "GFT01", - "fila_color_type": "单色", - "fila_type": "PET-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "76100", - "fila_id": "GFT02", - "fila_color_type": "单色", - "fila_type": "PPS-CF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "51600", - "fila_id": "GFU00", - "fila_color_type": "单色", - "fila_type": "TPU 95A HF", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#0072CEFF" - ] - }, - { - "fila_color_code": "51101", - "fila_id": "GFU00", - "fila_color_type": "单色", - "fila_type": "TPU 95A HF", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#898D8DFF" - ] - }, - { - "fila_color_code": "51100", - "fila_id": "GFU00", - "fila_color_type": "单色", - "fila_type": "TPU 95A HF", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#101820FF" - ] - }, - { - "fila_color_code": "51200", - "fila_id": "GFU00", - "fila_color_type": "单色", - "fila_type": "TPU 95A HF", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#C8102EFF" - ] - }, - { - "fila_color_code": "51102", - "fila_id": "GFU00", - "fila_color_type": "单色", - "fila_type": "TPU 95A HF", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "51400", - "fila_id": "GFU00", - "fila_color_type": "单色", - "fila_type": "TPU 95A HF", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#F3E600FF" - ] - }, - { - "fila_color_code": "50101", - "fila_id": "GFU01", - "fila_color_type": "单色", - "fila_type": "TPU 95A", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "50100", - "fila_id": "GFU01", - "fila_color_type": "单色", - "fila_type": "TPU 95A", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "53600", - "fila_id": "GFU02", - "fila_color_type": "单色", - "fila_type": "TPU for AMS", - "fila_color_name": { - "de": "Blau", - "sv": "Blå", - "pt": "Azul", - "ko": "블루", - "ja": "ブルー", - "en": "Blue", - "ru": "Синий", - "it": "Blu", - "fr": "Bleu", - "hu": "Kék", - "zh": "蓝色", - "nl": "Blauw", - "es": "Azul" - }, - "fila_color": [ - "#5898DDFF" - ] - }, - { - "fila_color_code": "53102", - "fila_id": "GFU02", - "fila_color_type": "单色", - "fila_type": "TPU for AMS", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#939393FF" - ] - }, - { - "fila_color_code": "53500", - "fila_id": "GFU02", - "fila_color_type": "单色", - "fila_type": "TPU for AMS", - "fila_color_name": { - "de": "Neongrün", - "sv": "Neongrön", - "pt": "Verde-neon", - "ko": "네온 그린", - "ja": "ネオン グリーン", - "en": "Neon Green", - "ru": "Неоновый зелёный", - "it": "Verde neon", - "fr": "Vert fluo", - "hu": "Neonzöld", - "zh": "荧光绿", - "nl": "Neongroen", - "es": "Verde neón" - }, - "fila_color": [ - "#90FF1AFF" - ] - }, - { - "fila_color_code": "53101", - "fila_id": "GFU02", - "fila_color_type": "单色", - "fila_type": "TPU for AMS", - "fila_color_name": { - "de": "Schwarz", - "sv": "Svart", - "pt": "Preto", - "ko": "블랙", - "ja": "ブラック", - "en": "Black", - "ru": "Чёрный", - "it": "Nero", - "fr": "Noir", - "hu": "Fekete", - "zh": "黑色", - "nl": "Zwart", - "es": "Negro" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "53200", - "fila_id": "GFU02", - "fila_color_type": "单色", - "fila_type": "TPU for AMS", - "fila_color_name": { - "de": "Rot", - "sv": "Röd", - "pt": "Vermelho", - "ko": "레드", - "ja": "レッド", - "en": "Red", - "ru": "Красный", - "it": "Rosso", - "fr": "Rouge", - "hu": "Piros", - "zh": "红色", - "nl": "Rood", - "es": "Rojo" - }, - "fila_color": [ - "#ED0000FF" - ] - }, - { - "fila_color_code": "53100", - "fila_id": "GFU02", - "fila_color_type": "单色", - "fila_type": "TPU for AMS", - "fila_color_name": { - "de": "Weiß", - "sv": "Vit", - "pt": "Branco", - "ko": "화이트", - "ja": "ホワイト", - "en": "White", - "ru": "Белый", - "it": "Bianco", - "fr": "Blanc", - "hu": "Fehér", - "zh": "白色", - "nl": "Wit", - "es": "Blanco" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "53400", - "fila_id": "GFU02", - "fila_color_type": "单色", - "fila_type": "TPU for AMS", - "fila_color_name": { - "de": "Gelb", - "sv": "Gul", - "pt": "Amarelo", - "ko": "옐로우", - "ja": "イエロー", - "en": "Yellow", - "ru": "Жёлтый", - "it": "Giallo", - "fr": "Jaune", - "hu": "Sárga", - "zh": "黄色", - "nl": "Geel", - "es": "Amarillo" - }, - "fila_color": [ - "#F9EF41FF" - ] - }, - { - "fila_color_code": "16100", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Black", - "ru": "Чёрный", - "it": "", - "fr": "", - "hu": "", - "zh": "黑色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "16400", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Yellow", - "ru": "Жёлтый", - "it": "", - "fr": "", - "hu": "", - "zh": "黄色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#EFE255FF" - ] - }, - { - "fila_color_code": "16103", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "White", - "ru": "Белый", - "it": "", - "fr": "", - "hu": "", - "zh": "白色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "16600", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Cyan", - "ru": "Голубой", - "it": "", - "fr": "", - "hu": "", - "zh": "天蓝色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#4DAFDAFF" - ] - }, - { - "fila_color_code": "16200", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Red", - "ru": "Красный", - "it": "", - "fr": "", - "hu": "", - "zh": "深红色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#C6001AFF" - ] - }, - { - "fila_color_code": "16101", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "Grau", - "sv": "Grå", - "pt": "Cinza", - "ko": "그레이", - "ja": "グレー", - "en": "Gray", - "ru": "Серый", - "it": "Grigio", - "fr": "Gris", - "hu": "Szürke", - "zh": "灰色", - "nl": "Grijs", - "es": "Gris" - }, - "fila_color": [ - "#999D9DFF" - ] - }, - { - "fila_color_code": "13210", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Red", - "ru": "Красный", - "it": "", - "fr": "", - "hu": "", - "zh": "透明红", - "nl": "", - "es": "" - }, - "fila_color": [ - "#B5001180" - ] - }, - { - "fila_color_code": "13211", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Cherry Pink", - "ru": "Вишнёвый", - "it": "", - "fr": "", - "hu": "", - "zh": "果冻粉", - "nl": "", - "es": "" - }, - "fila_color": [ - "#F5B6CD80" - ] - }, - { - "fila_color_code": "13301", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Orange", - "ru": "Оранжевый", - "it": "", - "fr": "", - "hu": "", - "zh": "透明橙", - "nl": "", - "es": "" - }, - "fila_color": [ - "#F74E0280" - ] - }, - { - "fila_color_code": "13410", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Mellow Yellow", - "ru": "Ярко-жёлтый", - "it": "", - "fr": "", - "hu": "", - "zh": "黄水晶", - "nl": "", - "es": "" - }, - "fila_color": [ - "#F5DBAB80" - ] - }, - { - "fila_color_code": "13510", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Light Jade", - "ru": "Светлый нефрит", - "it": "", - "fr": "", - "hu": "", - "zh": "浅青玉", - "nl": "", - "es": "" - }, - "fila_color": [ - "#96D8AF80" - ] - }, - { - "fila_color_code": "13610", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Ice Blue", - "ru": "Голубой лёд", - "it": "", - "fr": "", - "hu": "", - "zh": "冰蓝", - "nl": "", - "es": "" - }, - "fila_color": [ - "#B8CDE980" - ] - }, - { - "fila_color_code": "13611", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Blue", - "ru": "Синий", - "it": "", - "fr": "", - "hu": "", - "zh": "透明蓝", - "nl": "", - "es": "" - }, - "fila_color": [ - "#0047BB80" - ] - }, - { - "fila_color_code": "13612", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Teal", - "ru": "Морской", - "it": "", - "fr": "", - "hu": "", - "zh": "蓝绿色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#009FA180" - ] - }, - { - "fila_color_code": "13710", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Purple", - "ru": "Пурпурный", - "it": "", - "fr": "", - "hu": "", - "zh": "透明紫", - "nl": "", - "es": "" - }, - "fila_color": [ - "#8344B080" - ] - }, - { - "fila_color_code": "13711", - "fila_id": "GFA17", - "fila_color_type": "单色", - "fila_type": "PLA Translucent", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Lavender", - "ru": "Лавандовый", - "it": "", - "fr": "", - "hu": "", - "zh": "紫罗兰", - "nl": "", - "es": "" - }, - "fila_color": [ - "#B8ACD680" - ] - }, - { - "fila_color_code": "13906", - "fila_id": "GFA05", - "fila_color_type": "渐变色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "South Beach", - "ru": "Южный пляж", - "it": "", - "fr": "", - "hu": "", - "zh": "马卡龙", - "nl": "", - "es": "" - }, - "fila_color": [ - "#00918BFF", - "#F772A4FF" - ] - }, - { - "fila_color_code": "13909", - "fila_id": "GFA05", - "fila_color_type": "渐变色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Aurora Purple", - "ru": "Пурпурное сияние", - "it": "", - "fr": "", - "hu": "", - "zh": "星云紫", - "nl": "", - "es": "" - }, - "fila_color": [ - "#7F3696FF", - "#006EC9FF" - ] - }, - { - "fila_color_code": "13912", - "fila_id": "GFA05", - "fila_color_type": "渐变色", - "fila_type": "PLA Silk", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Dawn Radiance", - "ru": "Сияющий рассвет", - "it": "", - "fr": "", - "hu": "", - "zh": "浅彩虹", - "nl": "", - "es": "" - }, - "fila_color": [ - "#EC984CFF", - "#6CD4BCFF", - "#A66EB9FF", - "#D87694FF" - ] - }, - { - "fila_color_code": "51103", - "fila_id": "GFU03", - "fila_color_type": "单色", - "fila_type": "TPU 90A", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Black", - "ru": "Чёрный", - "it": "", - "fr": "", - "hu": "", - "zh": "黑色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "51105", - "fila_id": "GFU03", - "fila_color_type": "单色", - "fila_type": "TPU 90A", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "White", - "ru": "Белый", - "it": "", - "fr": "", - "hu": "", - "zh": "白色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "51305", - "fila_id": "GFU04", - "fila_color_type": "单色", - "fila_type": "TPU 85A", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Neon Orange", - "ru": "Неоновый оранжевый", - "it": "", - "fr": "", - "hu": "", - "zh": "暖橙色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#F68B1BFF" - ] - }, - { - "fila_color_code": "51500", - "fila_id": "GFU04", - "fila_color_type": "单色", - "fila_type": "TPU 85A", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Light Cyan", - "ru": "Светло-голубой", - "it": "", - "fr": "", - "hu": "", - "zh": "苍青色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#C3E2D6FF" - ] - }, - { - "fila_color_code": "51900", - "fila_id": "GFU03", - "fila_color_type": "渐变色", - "fila_type": "TPU 90A", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Frozen", - "ru": "Морозный", - "it": "", - "fr": "", - "hu": "", - "zh": "冰封蓝", - "nl": "", - "es": "" - }, - "fila_color": [ - "#FFFFFFFF", - "#40B6E4FF" - ] - }, - { - "fila_color_code": "51901", - "fila_id": "GFU03", - "fila_color_type": "渐变色", - "fila_type": "TPU 90A", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Blaze", - "ru": "Пламя", - "it": "", - "fr": "", - "hu": "", - "zh": "西瓜红", - "nl": "", - "es": "" - }, - "fila_color": [ - "#D21B3CFF", - "#F1AAA8FF" - ] - }, - { - "fila_color_code": "65104", - "fila_id": "GFS02", - "fila_color_type": "单色", - "fila_type": "Support for PLA", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "White", - "ru": "Белый", - "it": "", - "fr": "", - "hu": "", - "zh": "白色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "12104", - "fila_id": "GFA10", - "fila_color_type": "单色", - "fila_type": "PLA Tough+", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Black", - "ru": "Чёрный", - "it": "", - "fr": "", - "hu": "", - "zh": "黑色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#000000FF" - ] - }, - { - "fila_color_code": "12105", - "fila_id": "GFA10", - "fila_color_type": "单色", - "fila_type": "PLA Tough+", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Gray", - "ru": "Серый", - "it": "", - "fr": "", - "hu": "", - "zh": "浅灰色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#AFB1AEFF" - ] - }, - { - "fila_color_code": "12106", - "fila_id": "GFA10", - "fila_color_type": "单色", - "fila_type": "PLA Tough+", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Silver", - "ru": "Серебристый", - "it": "", - "fr": "", - "hu": "", - "zh": "银色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#959698FF" - ] - }, - { - "fila_color_code": "12107", - "fila_id": "GFA10", - "fila_color_type": "单色", - "fila_type": "PLA Tough+", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "White", - "ru": "Белый", - "it": "", - "fr": "", - "hu": "", - "zh": "白色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#FFFFFFFF" - ] - }, - { - "fila_color_code": "12301", - "fila_id": "GFA10", - "fila_color_type": "单色", - "fila_type": "PLA Tough+", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Orange", - "ru": "Оранжевый", - "it": "", - "fr": "", - "hu": "", - "zh": "橙色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#DC3A27FF" - ] - }, - { - "fila_color_code": "12401", - "fila_id": "GFA10", - "fila_color_type": "单色", - "fila_type": "PLA Tough+", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Yellow", - "ru": "Жёлтый", - "it": "", - "fr": "", - "hu": "", - "zh": "亮黄色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#F4D53FFF" - ] - }, - { - "fila_color_code": "12601", - "fila_id": "GFA10", - "fila_color_type": "单色", - "fila_type": "PLA Tough+", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Cyan", - "ru": "Голубой", - "it": "", - "fr": "", - "hu": "", - "zh": "天蓝色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#009BD8FF" - ] - }, - { - "fila_color_code": "13100", - "fila_id": "GFA02", - "fila_color_type": "单色", - "fila_type": "PLA Metal", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Iron Gray Metallic", - "ru": "Серое железо", - "it": "", - "fr": "", - "hu": "", - "zh": "深空灰", - "nl": "", - "es": "" - }, - "fila_color": [ - "#43403DFF" - ] - }, - { - "fila_color_code": "13400", - "fila_id": "GFA02", - "fila_color_type": "单色", - "fila_type": "PLA Metal", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Iridium Gold Metallic", - "ru": "Золотистый иридий", - "it": "", - "fr": "", - "hu": "", - "zh": "香槟金", - "nl": "", - "es": "" - }, - "fila_color": [ - "#B39B84FF" - ] - }, - { - "fila_color_code": "13500", - "fila_id": "GFA02", - "fila_color_type": "单色", - "fila_type": "PLA Metal", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Oxide Green Metallic", - "ru": "Зелёный оксид", - "it": "", - "fr": "", - "hu": "", - "zh": "极光绿", - "nl": "", - "es": "" - }, - "fila_color": [ - "#1D7C6AFF" - ] - }, - { - "fila_color_code": "13600", - "fila_id": "GFA02", - "fila_color_type": "单色", - "fila_type": "PLA Metal", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Cobalt Blue Metallic", - "ru": "Кобальт", - "it": "", - "fr": "", - "hu": "", - "zh": "典雅蓝", - "nl": "", - "es": "" - }, - "fila_color": [ - "#39699EFF" - ] - }, - { - "fila_color_code": "13800", - "fila_id": "GFA02", - "fila_color_type": "单色", - "fila_type": "PLA Metal", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Copper Brown Metallic", - "ru": "Коричневая медь", - "it": "", - "fr": "", - "hu": "", - "zh": "咖啡金", - "nl": "", - "es": "" - }, - "fila_color": [ - "#AA6443FF" - ] - }, - { - "fila_color_code": "16601", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Blue", - "ru": "Синий", - "it": "", - "fr": "", - "hu": "", - "zh": "蓝色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#004EA8FF" - ] - }, - { - "fila_color_code": "16401", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Sunflower Yellow", - "ru": "Жёлтый подсолнух", - "it": "", - "fr": "", - "hu": "", - "zh": "橙黄色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#FFB549FF" - ] - }, - { - "fila_color_code": "16501", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Green", - "ru": "Зелёный", - "it": "", - "fr": "", - "hu": "", - "zh": "绿色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#00BB31FF" - ] - }, - { - "fila_color_code": "16301", - "fila_id": "GFA18", - "fila_color_type": "单色", - "fila_type": "PLA Lite", - "fila_color_name": { - "de": "", - "sv": "", - "pt": "", - "ko": "", - "ja": "", - "en": "Orange", - "ru": "Оранжевый", - "it": "", - "fr": "", - "hu": "", - "zh": "橙色", - "nl": "", - "es": "" - }, - "fila_color": [ - "#FF671FFF" - ] - } - ], - "total": 294 -} + "data": [ + { + "fila_color_code": "10300", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Orange", + "sv": "Orange", + "pt": "Laranja", + "ko": "오렌지", + "ja": "オレンジ", + "en": "Orange", + "it": "Arancione", + "fr": "Orange", + "hu": "Narancssárga", + "zh": "橙色", + "nl": "Oranje", + "es": "Naranja" + }, + "color_code": "A0", + "fila_color": [ + "#FF6A13FF" + ] + }, + { + "fila_color_code": "10301", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Kürbis-Orange", + "sv": "Pumpaorange", + "pt": "Abóbora Laranja", + "ko": "펌프킨 오렌지", + "ja": "パンプキン オレンジ", + "en": "Pumpkin Orange", + "it": "Arancione zucca", + "fr": "Orange citrouille", + "hu": "Sütőtök", + "zh": "南瓜橙", + "nl": "Pompoenoranje", + "es": "Naranja calabaza" + }, + "color_code": "A1", + "fila_color": [ + "#FF9016FF" + ] + }, + { + "fila_color_code": "10602", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Blau-Grau", + "sv": "Blågrå", + "pt": "Azul-Cinza", + "ko": "블루 그레이", + "ja": "ブルー グレー", + "en": "Blue Gray", + "it": "Grigio blu", + "fr": "Bleu gris", + "hu": "Kékesszürke", + "zh": "蓝灰", + "nl": "Blauwgrijs", + "es": "Gris azulado" + }, + "color_code": "B1", + "fila_color": [ + "#5B6579FF" + ] + }, + { + "fila_color_code": "10604", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Kobaltblau", + "sv": "Koboltblå", + "pt": "Azul-cobalto", + "ko": "코발트 블루", + "ja": "コバルト ブルー", + "en": "Cobalt Blue", + "it": "Blu cobalto", + "fr": "Bleu cobalt", + "hu": "Kobaltkék", + "zh": "钴蓝色", + "nl": "Kobaltblauw", + "es": "Azul cobalto" + }, + "color_code": "B3", + "fila_color": [ + "#0056B8FF" + ] + }, + { + "fila_color_code": "10605", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Türkis", + "sv": "Turkos", + "pt": "Turquesa", + "ko": "터쿼이즈", + "ja": "ターコイズ", + "en": "Turquoise", + "it": "Turchese", + "fr": "Turquoise", + "hu": "Türkiz", + "zh": "松石绿", + "nl": "Turkoois", + "es": "Turquesa" + }, + "color_code": "B5", + "fila_color": [ + "#00B1B7FF" + ] + }, + { + "fila_color_code": "10603", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Cyan", + "sv": "Cyan", + "pt": "Ciano", + "ko": "시안", + "ja": "シアン", + "en": "Cyan", + "it": "Ciano", + "fr": "Cyan", + "hu": "Cián", + "zh": "青色", + "nl": "Cyaan", + "es": "Cian" + }, + "color_code": "B8", + "fila_color": [ + "#0086D6FF" + ] + }, + { + "fila_color_code": "10601", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B9", + "fila_color": [ + "#0A2989FF" + ] + }, + { + "fila_color_code": "10103", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#8E9089FF" + ] + }, + { + "fila_color_code": "10102", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Silber", + "sv": "Silver", + "pt": "Prateado", + "ko": "실버", + "ja": "シルバー", + "en": "Silver", + "it": "Argento", + "fr": "Argenté", + "hu": "Ezüst", + "zh": "银色", + "nl": "Zilver", + "es": "Plateado" + }, + "color_code": "D1", + "fila_color": [ + "#A6A9AAFF" + ] + }, + { + "fila_color_code": "10104", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Hellgrau", + "sv": "Ljusgrå", + "pt": "Cinza-claro", + "ko": "라이트 그레이", + "ja": "ライト グレー", + "en": "Light Gray", + "it": "Grigio chiaro", + "fr": "Gris clair", + "hu": "Világosszürke", + "zh": "浅灰", + "nl": "Lichtgrijs", + "es": "Gris claro" + }, + "color_code": "D2", + "fila_color": [ + "#D1D3D5FF" + ] + }, + { + "fila_color_code": "10105", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Dunkelgrau", + "sv": "Mörkgrå", + "pt": "Cinza-escuro", + "ko": "다크 그레이", + "ja": "ダーク グレー", + "en": "Dark Gray", + "it": "Grigio scuro", + "fr": "Gris foncé", + "hu": "Sötétszürke", + "zh": "深灰", + "nl": "Donkergrijs", + "es": "Gris oscuro" + }, + "color_code": "D3", + "fila_color": [ + "#545454FF" + ] + }, + { + "fila_color_code": "10502", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Mistelzweig-Grün", + "sv": "Mistelgrön", + "pt": "Mistletoe Green", + "ko": "미슬토 그린", + "ja": "ミスルトー グリーン", + "en": "Mistletoe Green", + "it": "Verde vischio", + "fr": "Vert gui", + "hu": "Fagyöngyzöld", + "zh": "圣诞绿", + "nl": "Maretakgroen", + "es": "Verde muérdago" + }, + "color_code": "G2", + "fila_color": [ + "#3F8E43FF" + ] + }, + { + "fila_color_code": "10503", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Hellgrün", + "sv": "Ljusgrön", + "pt": "Verde Brilhante", + "ko": "브라이트 그린", + "ja": "ブライト グリーン", + "en": "Bright Green", + "it": "Verde brillante", + "fr": "Vert vif", + "hu": "Világoszöld", + "zh": "苹果绿", + "nl": "Felgroen", + "es": "Verde brillante" + }, + "color_code": "G3", + "fila_color": [ + "#BECF00FF" + ] + }, + { + "fila_color_code": "10501", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Bambusgrün", + "sv": "Bambugrön", + "pt": "Verde-bambu", + "ko": "뱀부 그린", + "ja": "バンブー グリーン", + "en": "Bambu Green", + "it": "Verde bambù", + "fr": "Vert bambou", + "hu": "Bambu-zöld", + "zh": "拓竹绿", + "nl": "Bamboegroen", + "es": "Verde bambú" + }, + "color_code": "G6", + "fila_color": [ + "#00AE42FF" + ] + }, + { + "fila_color_code": "10101", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "10900", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Arktisches Flüstern", + "sv": "Arktisk viskning", + "pt": "Arctic Whisper", + "ko": "아크틱 위스퍼", + "ja": "アークティック ウィスパー", + "en": "Arctic Whisper", + "it": "Arctic Whisper", + "fr": "Murmure arctique", + "hu": "Sarkköri suttogás", + "zh": "蓝白渐变", + "nl": "Vleugje noordpool", + "es": "Susurro ártico" + }, + "color_code": "M0", + "fila_color": [ + "#9CDBD9FF", + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "10901", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Sonnenbrise", + "sv": "Solbris", + "pt": "Brisa Solar", + "ko": "솔라 브리즈", + "ja": "ソーラー ブリーズ", + "en": "Solar Breeze", + "it": "Solar Breeze", + "fr": "Brise solaire", + "hu": "Napszellő", + "zh": "红白渐变", + "nl": "Zonnebries", + "es": "Brisa solar" + }, + "color_code": "M1", + "fila_color": [ + "#E94B3CFF", + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "10902", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Meer und Wiese", + "sv": "Ocean till äng", + "pt": "Ocean to Meadow", + "ko": "오션에서 메도우로", + "ja": "オーシャン トゥ メドウ", + "en": "Ocean to Meadow", + "it": "Azzurro/verde con gradazione", + "fr": "Océan à Prairie", + "hu": "Óceántól a rétig", + "zh": "蓝绿渐变", + "nl": "Van oceaanblauw naar weidegroen", + "es": "Del océano a la pradera" + }, + "color_code": "M2", + "fila_color": [ + "#307FE2FF", + "#54FF9BFF" + ] + }, + { + "fila_color_code": "10903", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Zitrus-Pink", + "sv": "Rosa citrus", + "pt": "Pink Citrus", + "ko": "핑크 시트러스", + "ja": "ピンク シトラス", + "en": "Pink Citrus", + "it": "Rosa citrus", + "fr": "Agrume rose", + "hu": "Rózsaszín-citrus", + "zh": "霞光粉", + "nl": "Roze citrus", + "es": "Rosa cítrico" + }, + "color_code": "M3", + "fila_color": [ + "#F78F77FF", + "#E4505AFF" + ] + }, + { + "fila_color_code": "10904", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Minze-Limette", + "sv": "Mintlime", + "pt": "Menta-lima", + "ko": "민트 라임", + "ja": "ミント ライム", + "en": "Mint Lime", + "it": "Lime menta", + "fr": "Menthe citron vert", + "hu": "Menta-lime", + "zh": "青柠绿", + "nl": "Muntlimoen", + "es": "Lima menta" + }, + "color_code": "M4", + "fila_color": [ + "#B6FF43FF", + "#4EC939FF" + ] + }, + { + "fila_color_code": "10905", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Blaubeere-Bubblegum", + "sv": "Blåbärsbubbelgum", + "pt": "Chiclete de Mirtilo", + "ko": "블루베리 버블검", + "ja": "ブルーベリー バブルガム", + "en": "Blueberry Bubblegum", + "it": "Mirtillo", + "fr": "Chewing-gum myrtilles", + "hu": "Áfonyás rágógumi", + "zh": "泡泡紫", + "nl": "Bosbessenkauwgum", + "es": "Chicle de arándano" + }, + "color_code": "M5", + "fila_color": [ + "#6FCAEFFF", + "#8573DDFF" + ] + }, + { + "fila_color_code": "10906", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Leuchtende Abenddämmerung", + "sv": "Skymningsljus", + "pt": "Brilho do Crepúsculo", + "ko": "더스크 글래어", + "ja": "ダスク グレア", + "en": "Dusk Glare", + "it": "Dusk Glare", + "fr": "Éclat crépusculaire", + "hu": "Alkonyati csillámlás", + "zh": "日落橙", + "nl": "Schemerlicht", + "es": "Resplandor del crepúsculo" + }, + "color_code": "M6", + "fila_color": [ + "#CE4406FF", + "#ED9558FF" + ] + }, + { + "fila_color_code": "10907", + "fila_id": "GFA00", + "fila_color_type": "渐变色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Zuckerwatten-Wolke", + "sv": "Sockervaddsmoln", + "pt": "Cotton Candy Cloud", + "ko": "코튼 캔디 클라우드", + "ja": "コットン キャンディ クラウド", + "en": "Cotton Candy Cloud", + "it": "Zucchero filato", + "fr": "Nuage de barbe à papa", + "hu": "Vattacukorfelhő", + "zh": "多巴胺（粉蓝渐变）", + "nl": "Suikerspinwolk", + "es": "Nube de algodón de azúcar" + }, + "color_code": "M7", + "fila_color": [ + "#E7C1D5FF", + "#8EC9E9FF" + ] + }, + { + "fila_color_code": "10800", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Braun", + "sv": "Brun", + "pt": "Marrom", + "ko": "브라운", + "ja": "ブラウン", + "en": "Brown", + "it": "Marrone", + "fr": "Marron", + "hu": "Barna", + "zh": "棕色", + "nl": "Bruin", + "es": "Marrón" + }, + "color_code": "N0", + "fila_color": [ + "#9D432CFF" + ] + }, + { + "fila_color_code": "10802", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Kakaobraun", + "sv": "Kakaobrun", + "pt": "Cacau Marrom", + "ko": "코코아 브라운", + "ja": "ココア ブラウン", + "en": "Cocoa Brown", + "it": "Marrone cacao", + "fr": "Marron cacao", + "hu": "Kakaóbarna", + "zh": "可可棕", + "nl": "Chocoladebruin", + "es": "Marrón cacao" + }, + "color_code": "N1", + "fila_color": [ + "#6F5034FF" + ] + }, + { + "fila_color_code": "10201", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Beige", + "sv": "Beige", + "pt": "Bege", + "ko": "베이지", + "ja": "ベージュ", + "en": "Beige", + "it": "Beige", + "fr": "Beige", + "hu": "Bézs", + "zh": "杏色", + "nl": "Beige", + "es": "Beis" + }, + "color_code": "P0", + "fila_color": [ + "#F7E6DEFF" + ] + }, + { + "fila_color_code": "10203", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Pink", + "sv": "Rosa", + "pt": "Rosa", + "ko": "핑크", + "ja": "ピンク", + "en": "Pink", + "it": "Rosa", + "fr": "Rose", + "hu": "Rózsaszín", + "zh": "粉色", + "nl": "Roze", + "es": "Rosa" + }, + "color_code": "P1", + "fila_color": [ + "#F55A74FF" + ] + }, + { + "fila_color_code": "10701", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Indigo-Violett", + "sv": "Indigolila", + "pt": "Indigo Purple", + "ko": "인디고 퍼플", + "ja": "インディゴ パープル", + "en": "Indigo Purple", + "it": "Viola indaco", + "fr": "Violet indigo", + "hu": "Indigólila", + "zh": "绀紫色", + "nl": "Indigopaars", + "es": "Púrpura índigo" + }, + "color_code": "P2", + "fila_color": [ + "#482960FF" + ] + }, + { + "fila_color_code": "10700", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Lila", + "sv": "Lila", + "pt": "Roxo", + "ko": "퍼플", + "ja": "パープル", + "en": "Purple", + "it": "Viola", + "fr": "Violet", + "hu": "Lila", + "zh": "紫色", + "nl": "Paars", + "es": "Púrpura" + }, + "color_code": "P5", + "fila_color": [ + "#5E43B7FF" + ] + }, + { + "fila_color_code": "10202", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Magenta", + "sv": "Magenta", + "pt": "Magenta", + "ko": "마젠타", + "ja": "マゼンタ", + "en": "Magenta", + "it": "Magenta", + "fr": "Magenta", + "hu": "Magenta", + "zh": "品红", + "nl": "Magenta", + "es": "Magenta" + }, + "color_code": "P6", + "fila_color": [ + "#EC008CFF" + ] + }, + { + "fila_color_code": "10200", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Rot", + "sv": "Röd", + "pt": "Vermelho", + "ko": "레드", + "ja": "レッド", + "en": "Red", + "it": "Rosso", + "fr": "Rouge", + "hu": "Piros", + "zh": "红色", + "nl": "Rood", + "es": "Rojo" + }, + "color_code": "R0", + "fila_color": [ + "#C12E1FFF" + ] + }, + { + "fila_color_code": "10205", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Kastanienrot", + "sv": "Rödbrun", + "pt": "Maroon Red", + "ko": "마룬 레드", + "ja": "マルーン レッド", + "en": "Maroon Red", + "it": "Rosso bordeaux", + "fr": "Rouge marron", + "hu": "Gesztenyés vörös", + "zh": "胭脂红", + "nl": "Kastanjerood", + "es": "Rojo granate" + }, + "color_code": "R2", + "fila_color": [ + "#9D2235FF" + ] + }, + { + "fila_color_code": "10204", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Heißes Pink", + "sv": "Neonrosa", + "pt": "Rosa-choque", + "ko": "핫핑크", + "ja": "ホット ピンク", + "en": "Hot Pink", + "it": "Fucsia", + "fr": "Rose vif", + "hu": "Forró rózsaszín", + "zh": "桃红色", + "nl": "Felroze", + "es": "Rosa fucsia" + }, + "color_code": "R3", + "fila_color": [ + "#F5547CFF" + ] + }, + { + "fila_color_code": "10100", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Jade-Weiß", + "sv": "Jadevit", + "pt": "Jade Branco", + "ko": "제이드 화이트", + "ja": "ジェイド ホワイト", + "en": "Jade White", + "it": "Bianco giada", + "fr": "Blanc de jade", + "hu": "Jádefehér", + "zh": "玉石白", + "nl": "Jadewit", + "es": "Blanco jade" + }, + "color_code": "W1", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "10400", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#F4EE2AFF" + ] + }, + { + "fila_color_code": "10402", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Sonnenblumen-Gelb", + "sv": "Solrosgul", + "pt": "Girassol Amarelo", + "ko": "썬플라워 옐로우", + "ja": "サンフラワー イエロー", + "en": "Sunflower Yellow", + "it": "Giallo girasole", + "fr": "Jaune tournesol", + "hu": "Napraforgósárga", + "zh": "暖黄色", + "nl": "Zonnebloemgeel", + "es": "Amarillo girasol" + }, + "color_code": "Y2", + "fila_color": [ + "#FEC600FF" + ] + }, + { + "fila_color_code": "10801", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Bronze", + "sv": "Brons", + "pt": "Bronze", + "ko": "브론즈", + "ja": "ブロンズ", + "en": "Bronze", + "it": "Bronzo", + "fr": "Bronze", + "hu": "Bronz", + "zh": "青铜", + "nl": "Bronskleurig", + "es": "Bronce" + }, + "color_code": "Y3", + "fila_color": [ + "#847D48FF" + ] + }, + { + "fila_color_code": "10401", + "fila_id": "GFA00", + "fila_color_type": "单色", + "fila_type": "PLA Basic", + "fila_color_name": { + "de": "Gold", + "sv": "Guld", + "pt": "Dourado", + "ko": "골드", + "ja": "ゴールド", + "en": "Gold", + "it": "Oro", + "fr": "Doré", + "hu": "Arany", + "zh": "金色", + "nl": "Goud", + "es": "Dorado" + }, + "color_code": "Y4", + "fila_color": [ + "#E4BD68FF" + ] + }, + { + "fila_color_code": "11300", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Mandarine-Orange", + "sv": "Mandarinorange", + "pt": "Tangerina", + "ko": "만다린 오렌지", + "ja": "マンダリン オレンジ", + "en": "Mandarin Orange", + "it": "Arancio mandarino", + "fr": "Mandarine", + "hu": "Mandarinsárga", + "zh": "橘橙", + "nl": "Mandarijnoranje", + "es": "Naranja Mandarina" + }, + "color_code": "A2", + "fila_color": [ + "#F99963FF" + ] + }, + { + "fila_color_code": "11603", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Himmelblau", + "sv": "Himmelsblå", + "pt": "Azul-celeste", + "ko": "스카이 블루", + "ja": "スカイ ブルー", + "en": "Sky Blue", + "it": "Azzurro cielo", + "fr": "Bleu ciel", + "hu": "Égszínkék", + "zh": "天蓝色", + "nl": "Hemelsblauw", + "es": "Azul cielo" + }, + "color_code": "B0", + "fila_color": [ + "#56B7E6FF" + ] + }, + { + "fila_color_code": "11600", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Marineblau", + "sv": "Marinblå", + "pt": "Azul-marinho", + "ko": "마린 블루", + "ja": "マリン ブルー", + "en": "Marine Blue", + "it": "Blu marino", + "fr": "Bleu marine", + "hu": "Tengerkék", + "zh": "海蓝", + "nl": "Marineblauw", + "es": "Azul marino" + }, + "color_code": "B3", + "fila_color": [ + "#0078BFFF" + ] + }, + { + "fila_color_code": "11601", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Eisblau", + "sv": "Isblå", + "pt": "Azul-gelo", + "ko": "아이스 블루", + "ja": "アイス ブルー", + "en": "Ice Blue", + "it": "Blu ghiaccio", + "fr": "Bleu glacier", + "hu": "Jégkék", + "zh": "冰蓝", + "nl": "IJsblauw", + "es": "Azul hielo" + }, + "color_code": "B4", + "fila_color": [ + "#A3D8E1FF" + ] + }, + { + "fila_color_code": "11602", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Dunkelblau", + "sv": "Mörkblå", + "pt": "Azul-escuro", + "ko": "다크 블루", + "ja": "ダーク ブルー", + "en": "Dark Blue", + "it": "Blu scuro", + "fr": "Bleu foncé", + "hu": "Sötétkék", + "zh": "暗夜蓝", + "nl": "Donkerblauw", + "es": "Azul oscuro" + }, + "color_code": "B6", + "fila_color": [ + "#042F56FF" + ] + }, + { + "fila_color_code": "11104", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Nardo-Grau", + "sv": "Nardogrå", + "pt": "Nardo Gray", + "ko": "나르도 그레이", + "ja": "ナルド グレイ", + "en": "Nardo Gray", + "it": "Grigio Nardo", + "fr": "Gris nardo", + "hu": "Matt szürke", + "zh": "枪灰色", + "nl": "Nardogrijs", + "es": "Gris nardo" + }, + "color_code": "D0", + "fila_color": [ + "#757575FF" + ] + }, + { + "fila_color_code": "11102", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Aschgrau", + "sv": "Askgrå", + "pt": "Ash Gray", + "ko": "애쉬 그레이", + "ja": "アッシュ グレー", + "en": "Ash Gray", + "it": "Grigio cenere", + "fr": "Gris cendré", + "hu": "Hamuszürke", + "zh": "岩石灰", + "nl": "Asgrijs", + "es": "Gris ceniza" + }, + "color_code": "D3", + "fila_color": [ + "#9B9EA0FF" + ] + }, + { + "fila_color_code": "11502", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Apfelgrün", + "sv": "Äppelgrön", + "pt": "Maçã-Verde", + "ko": "애플 그린", + "ja": "アップル グリーン", + "en": "Apple Green", + "it": "Verde mela", + "fr": "Vert pomme", + "hu": "Almazöld", + "zh": "果绿色", + "nl": "Appelgroen", + "es": "Verde manzana" + }, + "color_code": "G0", + "fila_color": [ + "#C2E189FF" + ] + }, + { + "fila_color_code": "11500", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Grasgrün", + "sv": "Gräsgrön", + "pt": "Grama Verde", + "ko": "그래스 그린", + "ja": "グラス グリーン", + "en": "Grass Green", + "it": "Verde prato", + "fr": "Vert herbacé", + "hu": "Fűzöld", + "zh": "草绿", + "nl": "Grasgroen", + "es": "Verde hierba" + }, + "color_code": "G1", + "fila_color": [ + "#61C680FF" + ] + }, + { + "fila_color_code": "11501", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Dunkelgrün", + "sv": "Mörkgrön", + "pt": "Verde-escuro", + "ko": "다크 그린", + "ja": "ダーク グリーン", + "en": "Dark Green", + "it": "Verde scuro", + "fr": "Vert foncé", + "hu": "Sötétzöld", + "zh": "暗夜绿", + "nl": "Donkergroen", + "es": "Verde oscuro" + }, + "color_code": "G7", + "fila_color": [ + "#68724DFF" + ] + }, + { + "fila_color_code": "11101", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Kohlschwarz", + "sv": "Kolsvart", + "pt": "Carvão", + "ko": "차콜", + "ja": "チャコール", + "en": "Charcoal", + "it": "Carbone", + "fr": "Anthracite", + "hu": "Faszén", + "zh": "炭黑", + "nl": "Donkergrijs", + "es": "Carbón" + }, + "color_code": "K1", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "11802", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Dunkel-Schokoladenbraun", + "sv": "Mörk choklad", + "pt": "Chocolate-escuro", + "ko": "다크 초콜릿", + "ja": "ダーク チョコレート", + "en": "Dark Chocolate", + "it": "Cioccolato", + "fr": "Chocolat noir", + "hu": "Étcsokoládé", + "zh": "深棕色", + "nl": "Donkerchocoladebruin", + "es": "Chocolate oscuro" + }, + "color_code": "N0", + "fila_color": [ + "#4D3324FF" + ] + }, + { + "fila_color_code": "11800", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Milchkaffee-Braun", + "sv": "Lattebrun", + "pt": "Café com Leite", + "ko": "라떼 브라운", + "ja": "ラテ ブラウン", + "en": "Latte Brown", + "it": "Caffelatte", + "fr": "Marron latte", + "hu": "Lattebarna", + "zh": "拿铁褐", + "nl": "Lattebruin", + "es": "Marrón Latte" + }, + "color_code": "N1", + "fila_color": [ + "#D3B7A7FF" + ] + }, + { + "fila_color_code": "11801", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Dunkelbraun", + "sv": "Mörkbrun", + "pt": "Marrom-escuro", + "ko": "다크 브라운", + "ja": "ダーク ブラウン", + "en": "Dark Brown", + "it": "Marrone scuro", + "fr": "Marron foncé", + "hu": "Sötétbarna", + "zh": "暗夜棕", + "nl": "Donkerbruin", + "es": "Marrón oscuro" + }, + "color_code": "N2", + "fila_color": [ + "#7D6556FF" + ] + }, + { + "fila_color_code": "11803", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Karamell", + "sv": "Kola", + "pt": "Caramelo", + "ko": "캐러멜", + "ja": "キャラメル", + "en": "Caramel", + "it": "Caramello", + "fr": "Caramel", + "hu": "Karamella", + "zh": "沙棕色", + "nl": "Karamel", + "es": "Caramelo" + }, + "color_code": "N3", + "fila_color": [ + "#AE835BFF" + ] + }, + { + "fila_color_code": "11201", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Sakura-Pink", + "sv": "Körsbärsrosa", + "pt": "Sakura Rosa", + "ko": "사쿠라 핑크", + "ja": "サクラ ピンク", + "en": "Sakura Pink", + "it": "Rosa sakura", + "fr": "Rose sakura", + "hu": "Szakurarózsaszín", + "zh": "樱花粉", + "nl": "Sakura-roze", + "es": "Rosa sakura" + }, + "color_code": "P3", + "fila_color": [ + "#E8AFCFFF" + ] + }, + { + "fila_color_code": "11700", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Flieder-Violett", + "sv": "Syrenlila", + "pt": "Lilás Roxo", + "ko": "라일락 퍼플", + "ja": "ライラック パープル", + "en": "Lilac Purple", + "it": "Lilla", + "fr": "Violet lilas", + "hu": "Ibolya", + "zh": "丁香紫", + "nl": "Lilapaars", + "es": "Púrpura lila" + }, + "color_code": "P4", + "fila_color": [ + "#AE96D4FF" + ] + }, + { + "fila_color_code": "11200", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Scharlachrot", + "sv": "Scharlakansröd", + "pt": "Vermelho Escarlate", + "ko": "스칼렛 레드", + "ja": "スカーレット レッド", + "en": "Scarlet Red", + "it": "Rosso scarlatto", + "fr": "Rouge écarlate", + "hu": "Skarlátvörös", + "zh": "猩红", + "nl": "Scharlakenrood", + "es": "Rojo escarlata" + }, + "color_code": "R1", + "fila_color": [ + "#DE4343FF" + ] + }, + { + "fila_color_code": "11203", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Terrakotta", + "sv": "Terrakotta", + "pt": "Terracota", + "ko": "테라코타", + "ja": "テラコッタ", + "en": "Terracotta", + "it": "Terracotta", + "fr": "Terre cuite", + "hu": "Terrakotta", + "zh": "砖红色", + "nl": "Terracotta", + "es": "Terracota" + }, + "color_code": "R2", + "fila_color": [ + "#B15533FF" + ] + }, + { + "fila_color_code": "11204", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Pflaume", + "sv": "Plommon", + "pt": "Ameixa", + "ko": "플럼", + "ja": "プラム", + "en": "Plum", + "it": "Prugna", + "fr": "Prune", + "hu": "Szilva", + "zh": "莓果紫", + "nl": "Pruim", + "es": "Ciruela" + }, + "color_code": "R3", + "fila_color": [ + "#950051FF" + ] + }, + { + "fila_color_code": "11202", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Dunkelrot", + "sv": "Mörkröd", + "pt": "Vermelho-escuro", + "ko": "다크 레드", + "ja": "ダーク レッド", + "en": "Dark Red", + "it": "Rosso scuro", + "fr": "Rouge foncé", + "hu": "Sötétvörös", + "zh": "暗夜红", + "nl": "Donkerrood", + "es": "Rojo oscuro" + }, + "color_code": "R4", + "fila_color": [ + "#BB3D43FF" + ] + }, + { + "fila_color_code": "11100", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Elfenbeinweiß", + "sv": "Elfenbensvit", + "pt": "Branco Marfim", + "ko": "아이보리 화이트", + "ja": "アイボリー ホワイト", + "en": "Ivory White", + "it": "Bianco avorio", + "fr": "Blanc ivoire", + "hu": "Elefántcsontfehér", + "zh": "象牙白", + "nl": "Ivoorwit", + "es": "Blanco marfil" + }, + "color_code": "W2", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "11103", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Knochenweiß", + "sv": "Benvit", + "pt": "Bone White", + "ko": "본 화이트", + "ja": "ボーン ホワイト", + "en": "Bone White", + "it": "Bianco osso", + "fr": "Blanc os", + "hu": "Csontfehér", + "zh": "骨白", + "nl": "Beenwit", + "es": "Blanco hueso" + }, + "color_code": "W3", + "fila_color": [ + "#CBC6B8FF" + ] + }, + { + "fila_color_code": "11400", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Zitronengelb", + "sv": "Citrongul", + "pt": "Amarelo-limão", + "ko": "레몬 옐로우", + "ja": "レモン イエロー", + "en": "Lemon Yellow", + "it": "Giallo limone", + "fr": "Jaune citron", + "hu": "Citromsárga", + "zh": "柠檬黄", + "nl": "Citroengeel", + "es": "Amarillo limón" + }, + "color_code": "Y2", + "fila_color": [ + "#F7D959FF" + ] + }, + { + "fila_color_code": "11401", + "fila_id": "GFA01", + "fila_color_type": "单色", + "fila_type": "PLA Matte", + "fila_color_name": { + "de": "Wüstenbraun", + "sv": "Ökenbrun", + "pt": "Desert Tan", + "ko": "데저트 탄", + "ja": "デザート タン", + "en": "Desert Tan", + "it": "Sabbia", + "fr": "Brun clair du désert", + "hu": "Sivatagi cser", + "zh": "沙漠黄", + "nl": "Woestijnbruin", + "es": "Arena del desierto" + }, + "color_code": "Y3", + "fila_color": [ + "#E8DBB7FF" + ] + }, + { + "fila_color_code": "13601", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#147BD1FF" + ] + }, + { + "fila_color_code": "13104", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Silber", + "sv": "Silver", + "pt": "Prateado", + "ko": "실버", + "ja": "シルバー", + "en": "Silver", + "it": "Argento", + "fr": "Argenté", + "hu": "Ezüst", + "zh": "银色", + "nl": "Zilver", + "es": "Plateado" + }, + "color_code": "D1", + "fila_color": [ + "#EAECEBFF" + ] + }, + { + "fila_color_code": "13502", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Grün", + "sv": "Grön", + "pt": "Verde", + "ko": "그린", + "ja": "グリーン", + "en": "Green", + "it": "Verde", + "fr": "Vert", + "hu": "Zöld", + "zh": "绿色", + "nl": "Groen", + "es": "Verde" + }, + "color_code": "G1", + "fila_color": [ + "#4CE4A0FF" + ] + }, + { + "fila_color_code": "13300", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Kupfer", + "sv": "Koppar", + "pt": "Cobre", + "ko": "코퍼", + "ja": "カッパー", + "en": "Copper", + "it": "Rame", + "fr": "Cuivre", + "hu": "Réz", + "zh": "铜色", + "nl": "Koperkleurig", + "es": "Cobre" + }, + "color_code": "N4", + "fila_color": [ + "#5E4B3CFF" + ] + }, + { + "fila_color_code": "13202", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Pink", + "sv": "Rosa", + "pt": "Rosa", + "ko": "핑크", + "ja": "ピンク", + "en": "Pink", + "it": "Rosa", + "fr": "Rose", + "hu": "Rózsaszín", + "zh": "粉色", + "nl": "Roze", + "es": "Rosa" + }, + "color_code": "P3", + "fila_color": [ + "#EEB1C1FF" + ] + }, + { + "fila_color_code": "13701", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Lila", + "sv": "Lila", + "pt": "Roxo", + "ko": "퍼플", + "ja": "パープル", + "en": "Purple", + "it": "Viola", + "fr": "Violet", + "hu": "Lila", + "zh": "紫色", + "nl": "Paars", + "es": "Púrpura" + }, + "color_code": "P5", + "fila_color": [ + "#854CE4FF" + ] + }, + { + "fila_color_code": "13901", + "fila_id": "GFA05", + "fila_color_type": "多拼色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Goldenes Rosa", + "sv": "Gyllene ros", + "pt": "Rosa Dourada", + "ko": "길디드 로즈", + "ja": "ギルディッド ローズ", + "en": "Gilded Rose", + "it": "Rosa con sfumature dorate", + "fr": "Rose doré", + "hu": "Aranyozott rózsa", + "zh": "金粉双色", + "nl": "Vergulde roos", + "es": "Rosa dorado" + }, + "color_code": "T1", + "fila_color": [ + "#FF9425FF", + "#C16784FF" + ] + }, + { + "fila_color_code": "13902", + "fila_id": "GFA05", + "fila_color_type": "多拼色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Mitternachtsglanz", + "sv": "Midnattsflamma", + "pt": "Midnight Blaze", + "ko": "미드나이트 블레이즈", + "ja": "ミッドナイト ブレイズ", + "en": "Midnight Blaze", + "it": "Midnight Blaze", + "fr": "Feu de minuit", + "hu": "Éjféli ragyogás", + "zh": "蓝红双色", + "nl": "Middernachtblauw", + "es": "Resplandor de medianoche" + }, + "color_code": "T2", + "fila_color": [ + "#0047BBFF", + "#7D1B49FF" + ] + }, + { + "fila_color_code": "13903", + "fila_id": "GFA05", + "fila_color_type": "多拼色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Neon City", + "sv": "Stadsljus", + "pt": "Cidade Neon", + "ko": "네온 시티", + "ja": "ネオン シティ", + "en": "Neon City", + "it": "Neon City", + "fr": "Ville de Néon", + "hu": "Neonfény", + "zh": "蓝粉双色", + "nl": "Neonstad", + "es": "Ciudad de neón" + }, + "color_code": "T3", + "fila_color": [ + "#0047BBFF", + "#BB22A3FF" + ] + }, + { + "fila_color_code": "13904", + "fila_id": "GFA05", + "fila_color_type": "多拼色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Hawaii-Blau", + "sv": "Blå Hawaii", + "pt": "Blue Hawaii", + "ko": "블루 하와이", + "ja": "ブルー ハワイ", + "en": "Blue Hawaii", + "it": "Blue Hawaii", + "fr": "Hawaï bleu", + "hu": "Kék Hawaii", + "zh": "蓝绿双色", + "nl": "Blauw Hawaï", + "es": "Azul Hawái" + }, + "color_code": "T4", + "fila_color": [ + "#418FDEFF", + "#70C884FF" + ] + }, + { + "fila_color_code": "13905", + "fila_id": "GFA05", + "fila_color_type": "多拼色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Dunkler Samt (Schwarz-Rot)", + "sv": "Sammetsglans (svart-röd)", + "pt": "Velvet Eclipse (Preto-Vermelho)", + "ko": "벨벳 이클립스(블랙-레드)", + "ja": "ベルベット エクリプス (ブラック レッド)", + "en": "Velvet Eclipse (Black-Red)", + "it": "Velvet Eclipse (nero/rosso)", + "fr": "Éclipse de velours (Noir-Rouge)", + "hu": "Bársony naplemente (fekete-piros)", + "zh": "灰烬红", + "nl": "Fluwelen zonsverduistering (zwart-rood)", + "es": "Eclipse de terciopelo (negro-rojo)" + }, + "color_code": "T5", + "fila_color": [ + "#000000FF", + "#A34342FF" + ] + }, + { + "fila_color_code": "13105", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "13401", + "fila_id": "GFA05", + "fila_color_type": "单色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "Gold", + "sv": "Guld", + "pt": "Dourado", + "ko": "골드", + "ja": "ゴールド", + "en": "Gold", + "it": "Oro", + "fr": "Doré", + "hu": "Arany", + "zh": "金色", + "nl": "Goud", + "es": "Dorado" + }, + "color_code": "Y4", + "fila_color": [ + "#E5B03DFF" + ] + }, + { + "fila_color_code": "13603", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Babyblau", + "sv": "Babyblå", + "pt": "Azul-bebê", + "ko": "베이비 블루", + "ja": "ベイビー ブルー", + "en": "Baby Blue", + "it": "Blu-turchese chiaro", + "fr": "Bleu layette", + "hu": "Babakék", + "zh": "天空蓝", + "nl": "Babyblauw", + "es": "Azul bebé" + }, + "color_code": "B0", + "fila_color": [ + "#A8C6EEFF" + ] + }, + { + "fila_color_code": "13604", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "丝绸蓝", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B1", + "fila_color": [ + "#008BDAFF" + ] + }, + { + "fila_color_code": "13108", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Titangrau", + "sv": "Titangrå", + "pt": "Titan Gray", + "ko": "타이탄 그레이", + "ja": "チタン グレー", + "en": "Titan Gray", + "it": "Grigio titanio", + "fr": "Gris titane", + "hu": "Titánszürke", + "zh": "钛灰色", + "nl": "Titaangrijs", + "es": "Gris titán" + }, + "color_code": "D0", + "fila_color": [ + "#5F6367FF" + ] + }, + { + "fila_color_code": "13109", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Silber", + "sv": "Silver", + "pt": "Prateado", + "ko": "실버", + "ja": "シルバー", + "en": "Silver", + "it": "Argento", + "fr": "Argenté", + "hu": "Ezüst", + "zh": "丝绸银", + "nl": "Zilver", + "es": "Plateado" + }, + "color_code": "D1", + "fila_color": [ + "#C8C8C8FF" + ] + }, + { + "fila_color_code": "13506", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Candy-Grün", + "sv": "Godisgrön", + "pt": "Candy Green", + "ko": "캔디 그린", + "ja": "キャンディ グリーン", + "en": "Candy Green", + "it": "Verde caramella", + "fr": "Vert bonbon", + "hu": "Cukorkazöld", + "zh": "糖果绿", + "nl": "Snoepgroen", + "es": "Verde caramelo" + }, + "color_code": "G0", + "fila_color": [ + "#018814FF" + ] + }, + { + "fila_color_code": "13507", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Minze", + "sv": "Mint", + "pt": "Menta", + "ko": "민트", + "ja": "ミント", + "en": "Mint", + "it": "Menta", + "fr": "Menthe", + "hu": "Menta", + "zh": "薄荷绿", + "nl": "Munt", + "es": "Menta" + }, + "color_code": "G1", + "fila_color": [ + "#96DCB9FF" + ] + }, + { + "fila_color_code": "13702", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Lila", + "sv": "Lila", + "pt": "Roxo", + "ko": "퍼플", + "ja": "パープル", + "en": "Purple", + "it": "Viola", + "fr": "Violet", + "hu": "Lila", + "zh": "丝绸紫", + "nl": "Paars", + "es": "Púrpura" + }, + "color_code": "P0", + "fila_color": [ + "#8671CBFF" + ] + }, + { + "fila_color_code": "13205", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Candy-Rot", + "sv": "Godisröd", + "pt": "Candy Red", + "ko": "캔디 레드", + "ja": "キャンディ レッド", + "en": "Candy Red", + "it": "Rosso caramella", + "fr": "Rouge bonbon", + "hu": "Cukorkapiros", + "zh": "糖果红", + "nl": "Snoeprood", + "es": "Rojo caramelo" + }, + "color_code": "R0", + "fila_color": [ + "#D02727FF" + ] + }, + { + "fila_color_code": "13206", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Gold-Rosa", + "sv": "Rödguld", + "pt": "Ouro Rosa", + "ko": "로즈 골드", + "ja": "ローズ ゴールド", + "en": "Rose Gold", + "it": "Oro rosa", + "fr": "Doré rose", + "hu": "Rózsaarany", + "zh": "烟粉色", + "nl": "Roségoud", + "es": "Oro rosa" + }, + "color_code": "R1", + "fila_color": [ + "#BA9594FF" + ] + }, + { + "fila_color_code": "13207", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Pink", + "sv": "Rosa", + "pt": "Rosa", + "ko": "핑크", + "ja": "ピンク", + "en": "Pink", + "it": "Rosa", + "fr": "Rose", + "hu": "Rózsaszín", + "zh": "丝绸粉", + "nl": "Roze", + "es": "Rosa" + }, + "color_code": "R2", + "fila_color": [ + "#F7ADA6FF" + ] + }, + { + "fila_color_code": "13110", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "丝绸白", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "13404", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Champagner", + "sv": "Champagne", + "pt": "Champagne", + "ko": "샴페인", + "ja": "シャンパン", + "en": "Champagne", + "it": "Champagne", + "fr": "Champagne", + "hu": "Pezsgő", + "zh": "香槟色", + "nl": "Champagne", + "es": "Champán" + }, + "color_code": "Y0", + "fila_color": [ + "#F3CFB2FF" + ] + }, + { + "fila_color_code": "13405", + "fila_id": "GFA06", + "fila_color_type": "单色", + "fila_type": "PLA Silk+", + "fila_color_name": { + "de": "Gold", + "sv": "Guld", + "pt": "Dourado", + "ko": "골드", + "ja": "ゴールド", + "en": "Gold", + "it": "Oro", + "fr": "Doré", + "hu": "Arany", + "zh": "丝绸金", + "nl": "Goud", + "es": "Dorado" + }, + "color_code": "Y1", + "fila_color": [ + "#F4A925FF" + ] + }, + { + "fila_color_code": "13103", + "fila_id": "GFA07", + "fila_color_type": "单色", + "fila_type": "PLA Marble", + "fila_color_name": { + "de": "Weißer Marmor", + "sv": "Vit marmor", + "pt": "Mármore Branco", + "ko": "화이트 마블", + "ja": "ホワイト マーブル", + "en": "White Marble", + "it": "Marmo bianco", + "fr": "Marbre blanc", + "hu": "Fehér márvány", + "zh": "大理石", + "nl": "Wit marmer", + "es": "Mármol blanco" + }, + "color_code": "D4", + "fila_color": [ + "#F7F3F0FF" + ] + }, + { + "fila_color_code": "13201", + "fila_id": "GFA07", + "fila_color_type": "单色", + "fila_type": "PLA Marble", + "fila_color_name": { + "de": "Granitrot", + "sv": "Röd granit", + "pt": "Granito Vermelho", + "ko": "레드 그래나이트", + "ja": "レッド グラナイト", + "en": "Red Granite", + "it": "Rosso granito", + "fr": "Granit rouge", + "hu": "Vörös gránit", + "zh": "砖红", + "nl": "Rood graniet", + "es": "Granate rojo" + }, + "color_code": "R5", + "fila_color": [ + "#AD4E38FF" + ] + }, + { + "fila_color_code": "13700", + "fila_id": "GFA08", + "fila_color_type": "单色", + "fila_type": "PLA Sparkle", + "fila_color_name": { + "de": "Glitzerndes Königslila", + "sv": "Kungslila glans", + "pt": "Royal Purple Sparkle", + "ko": "로얄 퍼플 스파클", + "ja": "ロイヤル パープル スパークル", + "en": "Royal Purple Sparkle", + "it": "Viola reale con brillantini", + "fr": "Violet royal scintillant", + "hu": "Csillámló királyi lila", + "zh": "深蓝", + "nl": "Sprankelend koningspaars", + "es": "Púrpura real brillante" + }, + "color_code": "B7", + "fila_color": [ + "#483D8BFF" + ] + }, + { + "fila_color_code": "13102", + "fila_id": "GFA08", + "fila_color_type": "单色", + "fila_type": "PLA Sparkle", + "fila_color_name": { + "de": "Glitzerndes Schiefergrau", + "sv": "Granitgrå glans", + "pt": "Slate Gray Sparkle", + "ko": "슬레이트 그레이 스파클", + "ja": "スレート グレース パークル", + "en": "Slate Gray Sparkle", + "it": "Grigio ardesia con brillantini", + "fr": "Gris ardoise scintillant", + "hu": "Csillámló palaszürke", + "zh": "灰色", + "nl": "Sprankelend leigrijs", + "es": "Gris pizarra brillante" + }, + "color_code": "D5", + "fila_color": [ + "#8E9089FF" + ] + }, + { + "fila_color_code": "13501", + "fila_id": "GFA08", + "fila_color_type": "单色", + "fila_type": "PLA Sparkle", + "fila_color_name": { + "de": "Glitzerndes Alpengrün", + "sv": "Alpingrön glans", + "pt": "Alpine Green Sparkle", + "ko": "알파인 그린 스파클", + "ja": "アルパイン グリーン スパークル", + "en": "Alpine Green Sparkle", + "it": "Verde alpino con brillantini", + "fr": "Vert alpin scintillant", + "hu": "Alpesi csillogó zöld", + "zh": "绿色", + "nl": "Sprankelend alpengroen", + "es": "Verde alpino brillante" + }, + "color_code": "G3", + "fila_color": [ + "#3F5443FF" + ] + }, + { + "fila_color_code": "13101", + "fila_id": "GFA08", + "fila_color_type": "单色", + "fila_type": "PLA Sparkle", + "fila_color_name": { + "de": "Glitzerndes Onyx-Schwarz", + "sv": "Onyxsvart glans", + "pt": "Onyx Black Sparkle", + "ko": "오닉스 블랙 스파클", + "ja": "オニキス ブラック スパークル", + "en": "Onyx Black Sparkle", + "it": "Nero onice con brillantini", + "fr": "Onyx noir scintillant", + "hu": "Csillámló ónixfekete", + "zh": "黑色", + "nl": "Sprankelend onyxzwart", + "es": "Negro ónix brillante" + }, + "color_code": "K2", + "fila_color": [ + "#2D2B28FF" + ] + }, + { + "fila_color_code": "13200", + "fila_id": "GFA08", + "fila_color_type": "单色", + "fila_type": "PLA Sparkle", + "fila_color_name": { + "de": "Glitzerndes Karminrot", + "sv": "Mörkröd glans", + "pt": "Crimson Red Sparkle", + "ko": "크림슨 레드 스파클", + "ja": "クリムゾン レッド スパークル", + "en": "Crimson Red Sparkle", + "it": "Rosso cremisi con brillantini", + "fr": "Pourpre scintillant", + "hu": "Csillámló bíborvörös", + "zh": "红色", + "nl": "Sprankelend karmozijnrood", + "es": "Rojo carmesí brillante" + }, + "color_code": "R2", + "fila_color": [ + "#792B36FF" + ] + }, + { + "fila_color_code": "13402", + "fila_id": "GFA08", + "fila_color_type": "单色", + "fila_type": "PLA Sparkle", + "fila_color_name": { + "de": "Klassisches Glitzer-Gold", + "sv": "Klassisk guld glans", + "pt": "Classic Gold Sparkle", + "ko": "클래식 골드 스파클", + "ja": "クラシック ゴールド スパークル", + "en": "Classic Gold Sparkle", + "it": "Oro con brillantini", + "fr": "Doré classique scintillant", + "hu": "Klasszikus csillogó arany", + "zh": "金色", + "nl": "Sprankelend klassiek goud", + "es": "Dorado clásico brillante" + }, + "color_code": "Y1", + "fila_color": [ + "#CEA629FF" + ] + }, + { + "fila_color_code": "12300", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Orange", + "sv": "Orange", + "pt": "Laranja", + "ko": "오렌지", + "ja": "オレンジ", + "en": "Orange", + "it": "Arancione", + "fr": "Orange", + "hu": "Narancssárga", + "zh": "橙色", + "nl": "Oranje", + "es": "Naranja" + }, + "color_code": "A0", + "fila_color": [ + "#FF7F41FF" + ] + }, + { + "fila_color_code": "12600", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Hellblau", + "sv": "Ljusblå", + "pt": "Azul-claro", + "ko": "라이트 블루", + "ja": "ライト ブルー", + "en": "Light Blue", + "it": "Azzurro chiaro", + "fr": "Bleu clair", + "hu": "Világoskék", + "zh": "浅蓝", + "nl": "Lichtblauw", + "es": "Azul claro" + }, + "color_code": "B4", + "fila_color": [ + "#0085ADFF" + ] + }, + { + "fila_color_code": "12700", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Lavendelblau", + "sv": "Lavendelblå", + "pt": "Azul-lavanda", + "ko": "라벤더 블루", + "ja": "ラベンダー ブルー", + "en": "Lavender Blue", + "it": "Blu lavanda", + "fr": "Bleu lavande", + "hu": "Levendulakék", + "zh": "薰衣草紫", + "nl": "Lavendelblauw", + "es": "Azul lavanda" + }, + "color_code": "B5", + "fila_color": [ + "#6667ABFF" + ] + }, + { + "fila_color_code": "12102", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#515A6CFF" + ] + }, + { + "fila_color_code": "12103", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Silber", + "sv": "Silver", + "pt": "Prateado", + "ko": "실버", + "ja": "シルバー", + "en": "Silver", + "it": "Argento", + "fr": "Argenté", + "hu": "Ezüst", + "zh": "银色", + "nl": "Zilver", + "es": "Plateado" + }, + "color_code": "D1", + "fila_color": [ + "#898D8DFF" + ] + }, + { + "fila_color_code": "12500", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Tannengrün", + "sv": "Pinjegrön", + "pt": "Pinho Verde", + "ko": "파인 그린", + "ja": "パイン グリーン", + "en": "Pine Green", + "it": "Verde pino", + "fr": "Vert pin", + "hu": "Fenyőzöld", + "zh": "松绿", + "nl": "Dennengroen", + "es": "Verde pino" + }, + "color_code": "G4", + "fila_color": [ + "#00482BFF" + ] + }, + { + "fila_color_code": "12101", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#25282AFF" + ] + }, + { + "fila_color_code": "12200", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Zinnoberrot", + "sv": "Vermilionröd", + "pt": "Vermelho Vermilion", + "ko": "버밀리언 레드", + "ja": "バーミリオン レッド", + "en": "Vermilion Red", + "it": "Rosso vermiglio", + "fr": "Rouge vermillon", + "hu": "Cinóbervörös", + "zh": "朱砂红", + "nl": "Vermiljoenrood", + "es": "Rojo bermellón" + }, + "color_code": "R3", + "fila_color": [ + "#DD3C22FF" + ] + }, + { + "fila_color_code": "12100", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W3", + "fila_color": [ + "#F9F7F4FF" + ] + }, + { + "fila_color_code": "12400", + "fila_id": "GFA09", + "fila_color_type": "单色", + "fila_type": "PLA Tough", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#FEDB00FF" + ] + }, + { + "fila_color_code": "14104", + "fila_id": "GFA11", + "fila_color_type": "单色", + "fila_type": "PLA Aero", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#CDCECAFF" + ] + }, + { + "fila_color_code": "14103", + "fila_id": "GFA11", + "fila_color_type": "单色", + "fila_type": "PLA Aero", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "14102", + "fila_id": "GFA11", + "fila_color_type": "单色", + "fila_type": "PLA Aero", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "15300", + "fila_id": "GFA12", + "fila_color_type": "单色", + "fila_type": "PLA Glow", + "fila_color_name": { + "de": "Leuchtend-Orange", + "sv": "Orange glöd", + "pt": "Brilho Laranja", + "ko": "글로우 오렌지", + "ja": "グロー オレンジ", + "en": "Glow Orange", + "it": "Arancione fosforescente", + "fr": "Orange éclatant", + "hu": "Ragyogó narancssárga", + "zh": "夜光橙", + "nl": "Oranje gloed", + "es": "Naranja brillante" + }, + "color_code": "A0", + "fila_color": [ + "#FF9D5BFF" + ] + }, + { + "fila_color_code": "15600", + "fila_id": "GFA12", + "fila_color_type": "单色", + "fila_type": "PLA Glow", + "fila_color_name": { + "de": "Leuchtend-Blau", + "sv": "Blå glöd", + "pt": "Brilho Azul", + "ko": "글로우 블루", + "ja": "グロー ブルー", + "en": "Glow Blue", + "it": "Blu fosforescente", + "fr": "Bleu éclatant", + "hu": "Ragyogó kék", + "zh": "夜光蓝", + "nl": "Blauwe gloed", + "es": "Azul brillante" + }, + "color_code": "B0", + "fila_color": [ + "#7AC0E9FF" + ] + }, + { + "fila_color_code": "15500", + "fila_id": "GFA12", + "fila_color_type": "单色", + "fila_type": "PLA Glow", + "fila_color_name": { + "de": "Leuchtend-Grün", + "sv": "Grön glöd", + "pt": "Brilho Verde", + "ko": "글로우 그린", + "ja": "グロー グリーン", + "en": "Glow Green", + "it": "Verde fosforescente", + "fr": "Vert éclatant", + "hu": "Ragyogó zöld", + "zh": "夜光绿", + "nl": "Groene gloed", + "es": "Verde brillante" + }, + "color_code": "G0", + "fila_color": [ + "#A1FFACFF" + ] + }, + { + "fila_color_code": "15200", + "fila_id": "GFA12", + "fila_color_type": "单色", + "fila_type": "PLA Glow", + "fila_color_name": { + "de": "Leuchtend-Pink", + "sv": "Rosa glöd", + "pt": "Rosa Brilhante", + "ko": "글로우 핑크", + "ja": "グロー ピンク", + "en": "Glow Pink", + "it": "Rosa fosforescente", + "fr": "Rose éclatant", + "hu": "Ragyogó rózsaszín", + "zh": "夜光粉", + "nl": "Roze gloed", + "es": "Rosa brillante" + }, + "color_code": "R0", + "fila_color": [ + "#F17B8FFF" + ] + }, + { + "fila_color_code": "15400", + "fila_id": "GFA12", + "fila_color_type": "单色", + "fila_type": "PLA Glow", + "fila_color_name": { + "de": "Leuchtend-Gelb", + "sv": "Gul glöd", + "pt": "Amarelo Brilhante", + "ko": "글로우 옐로우", + "ja": "グロー イエロー", + "en": "Glow Yellow", + "it": "Giallo fosforescente", + "fr": "Jaune éclatant", + "hu": "Ragyogó sárga", + "zh": "夜光黄", + "nl": "Gele gloed", + "es": "Amarillo brillante" + }, + "color_code": "Y0", + "fila_color": [ + "#F8FF80FF" + ] + }, + { + "fila_color_code": "15100", + "fila_id": "GFA13", + "fila_color_type": "单色", + "fila_type": "PLA Dynamic", + "fila_color_name": { + "de": "UV-Farbwechsel – Weiß nach Koralle", + "sv": "UV-toning - vit till korall", + "pt": "Mudança de cor UV — Branco para coral", + "ko": "UV 컬러 변경 - 화이트에서 코랄로", + "ja": "UV カラー チェンジ - ホワイトからコーラル", + "en": "UV Color Changing - White to Coral", + "it": "Cambia colore con l'esposizione ai raggi UV - Da bianco a corallo", + "fr": "Changement de couleur UV - Blanc à corail", + "hu": "UV-színváltó – fehérről korallra", + "zh": "光变-白变粉", + "nl": "UV-kleurverandering: wit naar koraal", + "es": "De blanco a coral (Cambia con los rayos UV)" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "13602", + "fila_id": "GFA15", + "fila_color_type": "单色", + "fila_type": "PLA Galaxy", + "fila_color_name": { + "de": "Lila", + "sv": "Lila", + "pt": "Roxo", + "ko": "퍼플", + "ja": "パープル", + "en": "Purple", + "it": "Viola", + "fr": "Violet", + "hu": "Lila", + "zh": "星河紫", + "nl": "Paars", + "es": "Púrpura" + }, + "color_code": "B0", + "fila_color": [ + "#594177FF" + ] + }, + { + "fila_color_code": "13503", + "fila_id": "GFA15", + "fila_color_type": "单色", + "fila_type": "PLA Galaxy", + "fila_color_name": { + "de": "Grün", + "sv": "Grön", + "pt": "Verde", + "ko": "그린", + "ja": "グリーン", + "en": "Green", + "it": "Verde", + "fr": "Vert", + "hu": "Zöld", + "zh": "星河绿", + "nl": "Groen", + "es": "Verde" + }, + "color_code": "G0", + "fila_color": [ + "#3B665EFF" + ] + }, + { + "fila_color_code": "13504", + "fila_id": "GFA15", + "fila_color_type": "单色", + "fila_type": "PLA Galaxy", + "fila_color_name": { + "de": "Nebel", + "sv": "Nebulosor", + "pt": "Nebulae", + "ko": "네뷸라", + "ja": "ネビュリー", + "en": "Nebulae", + "it": "Nebula", + "fr": "Nébuleuse", + "hu": "Űrbéli ködök", + "zh": "星云色", + "nl": "Nevelig", + "es": "Nebulosa" + }, + "color_code": "G1", + "fila_color": [ + "#424379FF" + ] + }, + { + "fila_color_code": "13203", + "fila_id": "GFA15", + "fila_color_type": "单色", + "fila_type": "PLA Galaxy", + "fila_color_name": { + "de": "Braun", + "sv": "Brun", + "pt": "Marrom", + "ko": "브라운", + "ja": "ブラウン", + "en": "Brown", + "it": "Marrone", + "fr": "Marron", + "hu": "Barna", + "zh": "星河棕", + "nl": "Bruin", + "es": "Marrón" + }, + "color_code": "R0", + "fila_color": [ + "#684A43FF" + ] + }, + { + "fila_color_code": "13505", + "fila_id": "GFA16", + "fila_color_type": "单色", + "fila_type": "PLA Wood", + "fila_color_name": { + "de": "Klassische Birke", + "sv": "Klassisk björk", + "pt": "Classic Birch", + "ko": "클래식 버치", + "ja": "クラシック バーチ", + "en": "Classic Birch", + "it": "Betulla", + "fr": "Bouleau classique", + "hu": "Klasszikus nyírfa", + "zh": "经典桦木", + "nl": "Klassieke berk", + "es": "Abedul clásico" + }, + "color_code": "G0", + "fila_color": [ + "#918669FF" + ] + }, + { + "fila_color_code": "13107", + "fila_id": "GFA16", + "fila_color_type": "单色", + "fila_type": "PLA Wood", + "fila_color_name": { + "de": "Schwarze Walnuss", + "sv": "Svart valnöt", + "pt": "Noz preta", + "ko": "블랙 월넛", + "ja": "ブラック ウォールナット", + "en": "Black Walnut", + "it": "Noce nero", + "fr": "Noyer noir", + "hu": "Fekete dió", + "zh": "黑胡桃", + "nl": "Walnootzwart", + "es": "Nogal negro" + }, + "color_code": "K0", + "fila_color": [ + "#4F3F24FF" + ] + }, + { + "fila_color_code": "13801", + "fila_id": "GFA16", + "fila_color_type": "单色", + "fila_type": "PLA Wood", + "fila_color_name": { + "de": "Lehmbraun", + "sv": "Lerbrun", + "pt": "Clay Brown", + "ko": "클레이 브라운", + "ja": "クレイ ブラウン", + "en": "Clay Brown", + "it": "Marrone argilla", + "fr": "Marron argile", + "hu": "Agyagbarna", + "zh": "陶土褐", + "nl": "Modderbruin", + "es": "Marrón arcilla" + }, + "color_code": "N0", + "fila_color": [ + "#995F11FF" + ] + }, + { + "fila_color_code": "13204", + "fila_id": "GFA16", + "fila_color_type": "单色", + "fila_type": "PLA Wood", + "fila_color_name": { + "de": "Rosenholz", + "sv": "Rosenträ", + "pt": "Jacarandá", + "ko": "로즈우드", + "ja": "ローズウッド", + "en": "Rosewood", + "it": "Palissandro", + "fr": "Palissandre", + "hu": "Rózsafa", + "zh": "红木", + "nl": "Rozenhout", + "es": "Palo de rosa" + }, + "color_code": "R0", + "fila_color": [ + "#4C241CFF" + ] + }, + { + "fila_color_code": "13106", + "fila_id": "GFA16", + "fila_color_type": "单色", + "fila_type": "PLA Wood", + "fila_color_name": { + "de": "Weiße Eiche", + "sv": "Vit ek", + "pt": "Carvalho Branco", + "ko": "화이트 오크", + "ja": "ホワイト オーク", + "en": "White Oak", + "it": "Rovere bianco", + "fr": "Chêne blanc", + "hu": "Fehér tölgy", + "zh": "白橡木", + "nl": "Wit eiken", + "es": "Roble blanco" + }, + "color_code": "W0", + "fila_color": [ + "#D6CCA3FF" + ] + }, + { + "fila_color_code": "13403", + "fila_id": "GFA16", + "fila_color_type": "单色", + "fila_type": "PLA Wood", + "fila_color_name": { + "de": "Ockergelb", + "sv": "Ockragul", + "pt": "Amarelo-ocre", + "ko": "오커 옐로우", + "ja": "オーカー イエロー", + "en": "Ochre Yellow", + "it": "Giallo ocra", + "fr": "Jaune ocre", + "hu": "Okkersárga", + "zh": "赭石黄", + "nl": "Okergeel", + "es": "Amarillo ocre" + }, + "color_code": "Y0", + "fila_color": [ + "#C98935FF" + ] + }, + { + "fila_color_code": "14601", + "fila_id": "GFA50", + "fila_color_type": "单色", + "fila_type": "PLA-CF", + "fila_color_name": { + "de": "Königsblau", + "sv": "Kungsblå", + "pt": "Azul Royal", + "ko": "로얄 블루", + "ja": "ロイヤル ブルー", + "en": "Royal Blue", + "it": "Blu royal", + "fr": "Bleu royal", + "hu": "Királykék", + "zh": "皇家蓝", + "nl": "Koningsblauw", + "es": "Azul real" + }, + "color_code": "B6", + "fila_color": [ + "#2842ADFF" + ] + }, + { + "fila_color_code": "14600", + "fila_id": "GFA50", + "fila_color_type": "单色", + "fila_type": "PLA-CF", + "fila_color_name": { + "de": "Jeansblau", + "sv": "Jeansblå", + "pt": "Jeans Azul", + "ko": "진 블루", + "ja": "ジーンズ ブルー", + "en": "Jeans Blue", + "it": "Blu jeans", + "fr": "Jean bleu", + "hu": "Farmerkék", + "zh": "牛仔蓝", + "nl": "Jeansblauw", + "es": "Azul vaquero" + }, + "color_code": "B9", + "fila_color": [ + "#6e88bcFF" + ] + }, + { + "fila_color_code": "14101", + "fila_id": "GFA50", + "fila_color_type": "单色", + "fila_type": "PLA-CF", + "fila_color_name": { + "de": "Lava-Grau", + "sv": "Lavagrå", + "pt": "Lava Cinza", + "ko": "라바 그레이", + "ja": "ラバ グレー", + "en": "Lava Gray", + "it": "Grigio lava", + "fr": "Gris lave", + "hu": "Lávaszürke", + "zh": "熔岩灰", + "nl": "Lavagrijs", + "es": "Gris lava" + }, + "color_code": "D6", + "fila_color": [ + "#4d5054FF" + ] + }, + { + "fila_color_code": "14500", + "fila_id": "GFA50", + "fila_color_type": "单色", + "fila_type": "PLA-CF", + "fila_color_name": { + "de": "Matcha-Grün", + "sv": "Matchagrön", + "pt": "Matcha Green", + "ko": "마차 그린", + "ja": "抹茶グリーン", + "en": "Matcha Green", + "it": "Verde matcha", + "fr": "Vert matcha", + "hu": "Matchazöld", + "zh": "抹茶绿", + "nl": "Matchagroen", + "es": "Verde matcha" + }, + "color_code": "G7", + "fila_color": [ + "#5c9748FF" + ] + }, + { + "fila_color_code": "14100", + "fila_id": "GFA50", + "fila_color_type": "单色", + "fila_type": "PLA-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "14700", + "fila_id": "GFA50", + "fila_color_type": "单色", + "fila_type": "PLA-CF", + "fila_color_name": { + "de": "Iris-Violett", + "sv": "Irislila", + "pt": "Íris Roxa", + "ko": "아이리스 퍼플", + "ja": "アイリス パープル", + "en": "Iris Purple", + "it": "Viola iris", + "fr": "Violet iris", + "hu": "Íriszlila", + "zh": "鸢尾花紫", + "nl": "Irispaars", + "es": "Púrpura iris" + }, + "color_code": "P7", + "fila_color": [ + "#69398EFF" + ] + }, + { + "fila_color_code": "14200", + "fila_id": "GFA50", + "fila_color_type": "单色", + "fila_type": "PLA-CF", + "fila_color_name": { + "de": "Burgunderrot", + "sv": "Vinröd", + "pt": "Burgundy Red", + "ko": "버건디 레드", + "ja": "バーガンディ レッド", + "en": "Burgundy Red", + "it": "Rosso borgogna", + "fr": "Rouge bordeaux", + "hu": "Bordó-vörös", + "zh": "勃艮第红", + "nl": "Wijnrood", + "es": "Rojo burdeos" + }, + "color_code": "R4", + "fila_color": [ + "#951e23FF" + ] + }, + { + "fila_color_code": "40300", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Orange", + "sv": "Orange", + "pt": "Laranja", + "ko": "오렌지", + "ja": "オレンジ", + "en": "Orange", + "it": "Arancione", + "fr": "Orange", + "hu": "Narancssárga", + "zh": "橙色", + "nl": "Oranje", + "es": "Naranja" + }, + "color_code": "A0", + "fila_color": [ + "#FF6A13FF" + ] + }, + { + "fila_color_code": "40600", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#0A2CA5FF" + ] + }, + { + "fila_color_code": "40601", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Azurblau", + "sv": "Azurblå", + "pt": "Azure", + "ko": "애저", + "ja": "アズール", + "en": "Azure", + "it": "Azzurro", + "fr": "Bleu azur", + "hu": "Azúr", + "zh": "天蓝色", + "nl": "Azuurblauw", + "es": "Azul celeste" + }, + "color_code": "B4", + "fila_color": [ + "#489FDFFF" + ] + }, + { + "fila_color_code": "40602", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Marineblau", + "sv": "Marinblå", + "pt": "Azul-marinho", + "ko": "네이비 블루", + "ja": "ネイビー ブルー", + "en": "Navy Blue", + "it": "Blu navy", + "fr": "Bleu marine", + "hu": "Tengerészkék", + "zh": "藏青色", + "nl": "Marineblauw", + "es": "Azul marino oscuro" + }, + "color_code": "B6", + "fila_color": [ + "#0C2340FF" + ] + }, + { + "fila_color_code": "40501", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Minze", + "sv": "Mint", + "pt": "Menta", + "ko": "민트", + "ja": "ミント", + "en": "Mint", + "it": "Menta", + "fr": "Menthe", + "hu": "Menta", + "zh": "青色", + "nl": "Munt", + "es": "Menta" + }, + "color_code": "B8", + "fila_color": [ + "#7AE1BFFF" + ] + }, + { + "fila_color_code": "40102", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Silber", + "sv": "Silver", + "pt": "Prateado", + "ko": "실버", + "ja": "シルバー", + "en": "Silver", + "it": "Argento", + "fr": "Argenté", + "hu": "Ezüst", + "zh": "银色", + "nl": "Zilver", + "es": "Plateado" + }, + "color_code": "D1", + "fila_color": [ + "#87909AFF" + ] + }, + { + "fila_color_code": "40500", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Bambusgrün", + "sv": "Bambugrön", + "pt": "Verde-bambu", + "ko": "뱀부 그린", + "ja": "バンブー グリーン", + "en": "Bambu Green", + "it": "Verde bambù", + "fr": "Vert bambou", + "hu": "Bambu-zöld", + "zh": "拓竹绿", + "nl": "Bamboegroen", + "es": "Verde bambú" + }, + "color_code": "G6", + "fila_color": [ + "#00AE42FF" + ] + }, + { + "fila_color_code": "40502", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Olive", + "sv": "Oliv", + "pt": "Olive", + "ko": "올리브", + "ja": "オリーブ", + "en": "Olive", + "it": "Oliva", + "fr": "Olive", + "hu": "Olivazöld", + "zh": "橄榄绿", + "nl": "Olijf", + "es": "Oliva" + }, + "color_code": "G7", + "fila_color": [ + "#789D4AFF" + ] + }, + { + "fila_color_code": "40101", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "40701", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Lavendel", + "sv": "Lavendel", + "pt": "Lavanda", + "ko": "라벤더", + "ja": "ラベンダー", + "en": "Lavender", + "it": "Lavanda", + "fr": "Lavande", + "hu": "Levendula", + "zh": "薰衣草紫", + "nl": "Lavendel", + "es": "Lavanda" + }, + "color_code": "P4", + "fila_color": [ + "#7248BDFF" + ] + }, + { + "fila_color_code": "40700", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Lila", + "sv": "Lila", + "pt": "Roxo", + "ko": "퍼플", + "ja": "パープル", + "en": "Purple", + "it": "Viola", + "fr": "Violet", + "hu": "Lila", + "zh": "紫色", + "nl": "Paars", + "es": "Púrpura" + }, + "color_code": "P6", + "fila_color": [ + "#AF1685FF" + ] + }, + { + "fila_color_code": "40200", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Rot", + "sv": "Röd", + "pt": "Vermelho", + "ko": "레드", + "ja": "レッド", + "en": "Red", + "it": "Rosso", + "fr": "Rouge", + "hu": "Piros", + "zh": "红色", + "nl": "Rood", + "es": "Rojo" + }, + "color_code": "R0", + "fila_color": [ + "#D32941FF" + ] + }, + { + "fila_color_code": "40100", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "40400", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#FCE900FF" + ] + }, + { + "fila_color_code": "40402", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Mandarinengelb", + "sv": "Mandaringul", + "pt": "Amarelo Tangerina", + "ko": "탠저린 옐로우", + "ja": "タンジェリン イエロー", + "en": "Tangerine Yellow", + "it": "Giallo tangerine", + "fr": "Jaune mandarine", + "hu": "Tangerin", + "zh": "橘黄", + "nl": "Feloranjegeel", + "es": "Amarillo mandarina" + }, + "color_code": "Y1", + "fila_color": [ + "#FFC72CFF" + ] + }, + { + "fila_color_code": "40401", + "fila_id": "GFB00", + "fila_color_type": "单色", + "fila_type": "ABS", + "fila_color_name": { + "de": "Beige", + "sv": "Beige", + "pt": "Bege", + "ko": "베이지", + "ja": "ベージュ", + "en": "Beige", + "it": "Beige", + "fr": "Beige", + "hu": "Bézs", + "zh": "卡其色", + "nl": "Beige", + "es": "Beis" + }, + "color_code": "Y2", + "fila_color": [ + "#DFD1A7FF" + ] + }, + { + "fila_color_code": "45600", + "fila_id": "GFB01", + "fila_color_type": "单色", + "fila_type": "ASA", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#2140B4FF" + ] + }, + { + "fila_color_code": "45102", + "fila_id": "GFB01", + "fila_color_type": "单色", + "fila_type": "ASA", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#8A949EFF" + ] + }, + { + "fila_color_code": "45500", + "fila_id": "GFB01", + "fila_color_type": "单色", + "fila_type": "ASA", + "fila_color_name": { + "de": "Grün", + "sv": "Grön", + "pt": "Verde", + "ko": "그린", + "ja": "グリーン", + "en": "Green", + "it": "Verde", + "fr": "Vert", + "hu": "Zöld", + "zh": "绿色", + "nl": "Groen", + "es": "Verde" + }, + "color_code": "G0", + "fila_color": [ + "#00A6A0FF" + ] + }, + { + "fila_color_code": "45101", + "fila_id": "GFB01", + "fila_color_type": "单色", + "fila_type": "ASA", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "45200", + "fila_id": "GFB01", + "fila_color_type": "单色", + "fila_type": "ASA", + "fila_color_name": { + "de": "Rot", + "sv": "Röd", + "pt": "Vermelho", + "ko": "레드", + "ja": "レッド", + "en": "Red", + "it": "Rosso", + "fr": "Rouge", + "hu": "Piros", + "zh": "红色", + "nl": "Rood", + "es": "Rojo" + }, + "color_code": "R0", + "fila_color": [ + "#E02928FF" + ] + }, + { + "fila_color_code": "45100", + "fila_id": "GFB01", + "fila_color_type": "单色", + "fila_type": "ASA", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFAF2FF" + ] + }, + { + "fila_color_code": "46100", + "fila_id": "GFB02", + "fila_color_type": "单色", + "fila_type": "ASA Aero", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#F5F1DDFF" + ] + }, + { + "fila_color_code": "41300", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Orange", + "sv": "Orange", + "pt": "Laranja", + "ko": "오렌지", + "ja": "オレンジ", + "en": "Orange", + "it": "Arancione", + "fr": "Orange", + "hu": "Narancssárga", + "zh": "橙色", + "nl": "Oranje", + "es": "Naranja" + }, + "color_code": "A0", + "fila_color": [ + "#F48438FF" + ] + }, + { + "fila_color_code": "41600", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#0C3B95FF" + ] + }, + { + "fila_color_code": "41102", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#C6C6C6FF" + ] + }, + { + "fila_color_code": "41500", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Grün", + "sv": "Grön", + "pt": "Verde", + "ko": "그린", + "ja": "グリーン", + "en": "Green", + "it": "Verde", + "fr": "Vert", + "hu": "Zöld", + "zh": "绿色", + "nl": "Groen", + "es": "Verde" + }, + "color_code": "G0", + "fila_color": [ + "#61BF36FF" + ] + }, + { + "fila_color_code": "41101", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "41200", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Rot", + "sv": "Röd", + "pt": "Vermelho", + "ko": "레드", + "ja": "レッド", + "en": "Red", + "it": "Rosso", + "fr": "Rouge", + "hu": "Piros", + "zh": "红色", + "nl": "Rood", + "es": "Rojo" + }, + "color_code": "R0", + "fila_color": [ + "#E83100FF" + ] + }, + { + "fila_color_code": "41100", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "41400", + "fila_id": "GFB50", + "fila_color_type": "单色", + "fila_type": "ABS-GF", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#FFE133FF" + ] + }, + { + "fila_color_code": "46101", + "fila_id": "GFB51", + "fila_color_type": "单色", + "fila_type": "ASA-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "60102", + "fila_id": "GFC00", + "fila_color_type": "单色", + "fila_type": "PC", + "fila_color_name": { + "de": "Klares Schwarz", + "sv": "Klar svart", + "pt": "Preto-claro", + "ko": "클리어 블랙", + "ja": "クリア ブラック", + "en": "Clear Black", + "it": "Nero trasparente", + "fr": "Noir transparent", + "hu": "Tiszta fekete", + "zh": "透明黑", + "nl": "Helder zwart", + "es": "Negro transparente" + }, + "color_code": "C0", + "fila_color": [ + "#68686580" + ] + }, + { + "fila_color_code": "60103", + "fila_id": "GFC00", + "fila_color_type": "单色", + "fila_type": "PC", + "fila_color_name": { + "de": "Durchsichtig", + "sv": "Genomskinlig", + "pt": "Transparente", + "ko": "투명", + "ja": "トランスペアレント", + "en": "Transparent", + "it": "Trasparente", + "fr": "Transparent", + "hu": "Áttetsző", + "zh": "透明", + "nl": "Transparant", + "es": "Translúcido" + }, + "color_code": "C1", + "fila_color": [ + "#00000000" + ] + }, + { + "fila_color_code": "60101", + "fila_id": "GFC00", + "fila_color_type": "单色", + "fila_type": "PC", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "60100", + "fila_id": "GFC00", + "fila_color_type": "单色", + "fila_type": "PC", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "63102", + "fila_id": "GFC01", + "fila_color_type": "单色", + "fila_type": "PC FR", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#A8A8AAFF" + ] + }, + { + "fila_color_code": "63100", + "fila_id": "GFC01", + "fila_color_type": "单色", + "fila_type": "PC FR", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "63101", + "fila_id": "GFC01", + "fila_color_type": "单色", + "fila_type": "PC FR", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "32300", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Orange", + "sv": "Genomskinlig orange", + "pt": "Laranja Translúcido", + "ko": "반투명 오렌지", + "ja": "トランスルーセント オレンジ", + "en": "Translucent Orange", + "it": "Arancione traslucido", + "fr": "Orange translucide", + "hu": "Áttetsző narancssárga", + "zh": "透明橘", + "nl": "Doorschijnend oranje", + "es": "Naranja translúcido" + }, + "color_code": "A0", + "fila_color": [ + "#FF911A80" + ] + }, + { + "fila_color_code": "32600", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Hellblau", + "sv": "Genomskinlig ljusblå", + "pt": "Azul-claro Translúcido", + "ko": "반투명 라이트 블루", + "ja": "トランスルーセント ライト ブルー", + "en": "Translucent Light Blue", + "it": "Azzurro traslucido", + "fr": "Bleu clair translucide", + "hu": "Áttetsző világoskék", + "zh": "透明浅蓝", + "nl": "Doorschijnend lichtblauw", + "es": "Azul claro translúcido" + }, + "color_code": "B0", + "fila_color": [ + "#61B0FF80" + ] + }, + { + "fila_color_code": "32101", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Klar", + "sv": "Klar", + "pt": "Claro", + "ko": "클리어", + "ja": "クリア", + "en": "Clear", + "it": "Trasparente", + "fr": "Transparent", + "hu": "Átlátszó", + "zh": "透明", + "nl": "Helder", + "es": "Transparente" + }, + "color_code": "C0", + "fila_color": [ + "#00000000" + ] + }, + { + "fila_color_code": "32100", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Grau", + "sv": "Genomskinlig grå", + "pt": "Cinza Translúcido", + "ko": "반투명 그레이", + "ja": "トランスルーセント グレー", + "en": "Translucent Gray", + "it": "Grigio traslucido", + "fr": "Gris translucide", + "hu": "Áttetsző szürke", + "zh": "透明灰", + "nl": "Doorschijnend grijs", + "es": "Gris translúcido" + }, + "color_code": "D0", + "fila_color": [ + "#8E8E8E80" + ] + }, + { + "fila_color_code": "32500", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Olivgrün", + "sv": "Genomskinlig oliv", + "pt": "Oliva Translúcido", + "ko": "반투명 올리브", + "ja": "トランスルーセント オリーブ", + "en": "Translucent Olive", + "it": "Oliva traslucido", + "fr": "Olive translucide", + "hu": "Áttetsző olivazöld", + "zh": "透明橄榄绿", + "nl": "Doorschijnend olijf", + "es": "Oliva translúcido" + }, + "color_code": "G0", + "fila_color": [ + "#748C4580" + ] + }, + { + "fila_color_code": "32501", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Blaugrün", + "sv": "Genomskinlig teal", + "pt": "Azul-petróleo Translúcido", + "ko": "반투명 틸", + "ja": "トランスルーセント ティール", + "en": "Translucent Teal", + "it": "Verde petrolio traslucido", + "fr": "Bleu sarcelle translucide", + "hu": "Áttetsző kékeszöld", + "zh": "透明浅绿", + "nl": "Doorschijnend blauwgroen", + "es": "Verde azulado translúcido" + }, + "color_code": "G1", + "fila_color": [ + "#77EDD780" + ] + }, + { + "fila_color_code": "32800", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Braun", + "sv": "Genomskinlig brun", + "pt": "Marrom Translúcido", + "ko": "반투명 브라운", + "ja": "トランスルーセント ブラウン", + "en": "Translucent Brown", + "it": "Marrone traslucido", + "fr": "Marron translucide", + "hu": "Áttetsző barna", + "zh": "透明茶色", + "nl": "Doorschijnend bruin", + "es": "Marrón translúcido" + }, + "color_code": "N0", + "fila_color": [ + "#C9A38180" + ] + }, + { + "fila_color_code": "32700", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Lila", + "sv": "Genomskinlig lila", + "pt": "Roxo Translúcido", + "ko": "반투명 퍼플", + "ja": "トランスルーセント パープル", + "en": "Translucent Purple", + "it": "Viola traslucido", + "fr": "Violet translucide", + "hu": "Áttetsző lila", + "zh": "透明紫", + "nl": "Doorschijnend paars", + "es": "Púrpura translúcido" + }, + "color_code": "P0", + "fila_color": [ + "#D6ABFF80" + ] + }, + { + "fila_color_code": "32200", + "fila_id": "GFG01", + "fila_color_type": "单色", + "fila_type": "PETG Translucent", + "fila_color_name": { + "de": "Durchsichtiges Pink", + "sv": "Genomskinlig rosa", + "pt": "Rosa Translúcido", + "ko": "반투명 핑크", + "ja": "トランスルーセント ピンク", + "en": "Translucent Pink", + "it": "Rosa traslucido", + "fr": "Rose translucide", + "hu": "Áttetsző rózsaszín", + "zh": "透明粉", + "nl": "Doorschijnend roze", + "es": "Rosa translúcido" + }, + "color_code": "P1", + "fila_color": [ + "#F9C1BD80" + ] + }, + { + "fila_color_code": "33300", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Orange", + "sv": "Orange", + "pt": "Laranja", + "ko": "오렌지", + "ja": "オレンジ", + "en": "Orange", + "it": "Arancione", + "fr": "Orange", + "hu": "Narancssárga", + "zh": "橙色", + "nl": "Oranje", + "es": "Naranja" + }, + "color_code": "A0", + "fila_color": [ + "#F75403FF" + ] + }, + { + "fila_color_code": "33600", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#002E96FF" + ] + }, + { + "fila_color_code": "33601", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Blauer See", + "sv": "Sjöblå", + "pt": "Lago Azul", + "ko": "레이크 블루", + "ja": "レイク ブルー", + "en": "Lake Blue", + "it": "Blu lago", + "fr": "Bleu lac", + "hu": "Vízkék", + "zh": "湖蓝", + "nl": "Meerblauw", + "es": "Azul Lago" + }, + "color_code": "B1", + "fila_color": [ + "#1F79E5FF" + ] + }, + { + "fila_color_code": "33101", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#ADB1B2FF" + ] + }, + { + "fila_color_code": "33103", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Dunkelgrau", + "sv": "Mörkgrå", + "pt": "Cinza-escuro", + "ko": "다크 그레이", + "ja": "ダーク グレー", + "en": "Dark Gray", + "it": "Grigio scuro", + "fr": "Gris foncé", + "hu": "Sötétszürke", + "zh": "深灰", + "nl": "Donkergrijs", + "es": "Gris oscuro" + }, + "color_code": "D1", + "fila_color": [ + "#515151FF" + ] + }, + { + "fila_color_code": "33500", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Grün", + "sv": "Grön", + "pt": "Verde", + "ko": "그린", + "ja": "グリーン", + "en": "Green", + "it": "Verde", + "fr": "Vert", + "hu": "Zöld", + "zh": "绿色", + "nl": "Groen", + "es": "Verde" + }, + "color_code": "G0", + "fila_color": [ + "#00AE42FF" + ] + }, + { + "fila_color_code": "33501", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Limettengrün", + "sv": "Limegrön", + "pt": "Verde-limão", + "ko": "라임 그린", + "ja": "ライム グリーン", + "en": "Lime Green", + "it": "Verde lime", + "fr": "Vert citron", + "hu": "Limezöld", + "zh": "柠檬绿", + "nl": "Limoengroen", + "es": "Verde lima" + }, + "color_code": "G1", + "fila_color": [ + "#6EE53CFF" + ] + }, + { + "fila_color_code": "33502", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Waldgrün", + "sv": "Skogsgrön", + "pt": "Verde-floresta", + "ko": "포레스트 그린", + "ja": "フォレスト グリーン", + "en": "Forest Green", + "it": "Verde foresta", + "fr": "Vert forêt", + "hu": "Erdőzöld", + "zh": "丛林绿", + "nl": "Bosgroen", + "es": "Verde bosque" + }, + "color_code": "G2", + "fila_color": [ + "#39541AFF" + ] + }, + { + "fila_color_code": "33102", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "33801", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Erdnussbraun", + "sv": "Jordnötsbrun", + "pt": "Peanut Brown", + "ko": "피넛 브라운", + "ja": "ピーナッツ ブラウン", + "en": "Peanut Brown", + "it": "Cognac", + "fr": "Marron cacahuète", + "hu": "Mogyoróbarna", + "zh": "花生棕", + "nl": "Pindabruin", + "es": "Marrón cacahuete" + }, + "color_code": "N1", + "fila_color": [ + "#875718FF" + ] + }, + { + "fila_color_code": "33200", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Rot", + "sv": "Röd", + "pt": "Vermelho", + "ko": "레드", + "ja": "レッド", + "en": "Red", + "it": "Rosso", + "fr": "Rouge", + "hu": "Piros", + "zh": "红色", + "nl": "Rood", + "es": "Rojo" + }, + "color_code": "R0", + "fila_color": [ + "#BC0900FF" + ] + }, + { + "fila_color_code": "33100", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "33400", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#FFD00BFF" + ] + }, + { + "fila_color_code": "33401", + "fila_id": "GFG02", + "fila_color_type": "单色", + "fila_type": "PETG HF", + "fila_color_name": { + "de": "Creme", + "sv": "Cremevit", + "pt": "Creme", + "ko": "크림", + "ja": "クリーム", + "en": "Cream", + "it": "Panna", + "fr": "Crème", + "hu": "Törtfehér", + "zh": "奶油白", + "nl": "Roomkleurig", + "es": "Crema" + }, + "color_code": "Y1", + "fila_color": [ + "#F9DFB9FF" + ] + }, + { + "fila_color_code": "31600", + "fila_id": "GFG50", + "fila_color_type": "单色", + "fila_type": "PETG-CF", + "fila_color_name": { + "de": "Indigo-Blau", + "sv": "Indigoblå", + "pt": "Indigo Blue", + "ko": "인디고 블루", + "ja": "インディゴ ブルー", + "en": "Indigo Blue", + "it": "Blu indaco", + "fr": "Bleu indigo", + "hu": "Indigókék", + "zh": "靛蓝色", + "nl": "Indigoblauw", + "es": "Azul índigo" + }, + "color_code": "B6", + "fila_color": [ + "#324585FF" + ] + }, + { + "fila_color_code": "31101", + "fila_id": "GFG50", + "fila_color_type": "单色", + "fila_type": "PETG-CF", + "fila_color_name": { + "de": "Titangrau", + "sv": "Titangrå", + "pt": "Titan Gray", + "ko": "타이탄 그레이", + "ja": "チタン グレー", + "en": "Titan Gray", + "it": "Grigio titanio", + "fr": "Gris titane", + "hu": "Titánszürke", + "zh": "钛灰色", + "nl": "Titaangrijs", + "es": "Gris titán" + }, + "color_code": "D6", + "fila_color": [ + "#565656FF" + ] + }, + { + "fila_color_code": "31500", + "fila_id": "GFG50", + "fila_color_type": "单色", + "fila_type": "PETG-CF", + "fila_color_name": { + "de": "Malachitgrün", + "sv": "Malakitgrön", + "pt": "Verde Malaquita", + "ko": "말라카이트 그린", + "ja": "マラカイト グリーン", + "en": "Malachite Green", + "it": "Verde malachite", + "fr": "Vert malachite", + "hu": "Malachitzöld", + "zh": "孔雀绿", + "nl": "Malachietgroen", + "es": "Verde malaquita" + }, + "color_code": "G7", + "fila_color": [ + "#16b08eFF" + ] + }, + { + "fila_color_code": "31100", + "fila_id": "GFG50", + "fila_color_type": "单色", + "fila_type": "PETG-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "31700", + "fila_id": "GFG50", + "fila_color_type": "单色", + "fila_type": "PETG-CF", + "fila_color_name": { + "de": "Lila-Violett", + "sv": "Violettlila", + "pt": "Violeta Roxo", + "ko": "바이올렛 퍼플", + "ja": "バイオレット パープル", + "en": "Violet Purple", + "it": "Viola", + "fr": "Violet pourpre", + "hu": "Viola", + "zh": "紫罗兰色", + "nl": "Violetpaars", + "es": "Violeta púrpura" + }, + "color_code": "P7", + "fila_color": [ + "#583061FF" + ] + }, + { + "fila_color_code": "31200", + "fila_id": "GFG50", + "fila_color_type": "单色", + "fila_type": "PETG-CF", + "fila_color_name": { + "de": "Ziegelrot", + "sv": "Tegelröd", + "pt": "Vermelho Tijolo", + "ko": "브릭 레드", + "ja": "ブリック レッド", + "en": "Brick Red", + "it": "Rosso mattone", + "fr": "Rouge brique", + "hu": "Téglavörös", + "zh": "砖红色", + "nl": "Steenrood", + "es": "Rojo ladrillo" + }, + "color_code": "R4", + "fila_color": [ + "#9f332aFF" + ] + }, + { + "fila_color_code": "70100", + "fila_id": "GFN04", + "fila_color_type": "单色", + "fila_type": "PAHT-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "72100", + "fila_id": "GFN05", + "fila_color_type": "单色", + "fila_type": "PA6-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "73100", + "fila_id": "GFN06", + "fila_color_type": "单色", + "fila_type": "PPA-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "72600", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#75AED8FF" + ] + }, + { + "fila_color_code": "72102", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "D0", + "fila_color": [ + "#EAEAE4FF" + ] + }, + { + "fila_color_code": "72103", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D1", + "fila_color": [ + "#353533FF" + ] + }, + { + "fila_color_code": "72500", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Limette", + "sv": "Lime", + "pt": "Lima", + "ko": "라임", + "ja": "ライム", + "en": "Lime", + "it": "Lime", + "fr": "Citron vert", + "hu": "Lime", + "zh": "柠檬绿", + "nl": "Limoen", + "es": "Lima" + }, + "color_code": "G0", + "fila_color": [ + "#C5ED48FF" + ] + }, + { + "fila_color_code": "72104", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "72800", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Braun", + "sv": "Brun", + "pt": "Marrom", + "ko": "브라운", + "ja": "ブラウン", + "en": "Brown", + "it": "Marrone", + "fr": "Marron", + "hu": "Barna", + "zh": "棕色", + "nl": "Bruin", + "es": "Marrón" + }, + "color_code": "N0", + "fila_color": [ + "#5B492FFF" + ] + }, + { + "fila_color_code": "72200", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Orange", + "sv": "Orange", + "pt": "Laranja", + "ko": "오렌지", + "ja": "オレンジ", + "en": "Orange", + "it": "Arancione", + "fr": "Orange", + "hu": "Narancssárga", + "zh": "橙色", + "nl": "Oranje", + "es": "Naranja" + }, + "color_code": "R0", + "fila_color": [ + "#FF4800FF" + ] + }, + { + "fila_color_code": "72400", + "fila_id": "GFN08", + "fila_color_type": "单色", + "fila_type": "PA6-GF", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#FFCE00FF" + ] + }, + { + "fila_color_code": "65500", + "fila_id": "GFS03", + "fila_color_type": "单色", + "fila_type": "Support for PA/PET", + "fila_color_name": { + "de": "Grün", + "sv": "Grön", + "pt": "Verde", + "ko": "그린", + "ja": "グリーン", + "en": "Green", + "it": "Verde", + "fr": "Vert", + "hu": "Zöld", + "zh": "绿色", + "nl": "Groen", + "es": "Verde" + }, + "color_code": "G1", + "fila_color": [ + "#C0DF16FF" + ] + }, + { + "fila_color_code": "66400", + "fila_id": "GFS04", + "fila_color_type": "单色", + "fila_type": "PVA", + "fila_color_name": { + "de": "Klar", + "sv": "Klar", + "pt": "Claro", + "ko": "클리어", + "ja": "クリア", + "en": "Clear", + "it": "Trasparente", + "fr": "Transparent", + "hu": "Átlátszó", + "zh": "透明浅黄色", + "nl": "Helder", + "es": "Transparente" + }, + "color_code": "Y0", + "fila_color": [ + "#F0F1A880" + ] + }, + { + "fila_color_code": "65102", + "fila_id": "GFS05", + "fila_color_type": "单色", + "fila_type": "Support for PLA/PETG", + "fila_color_name": { + "de": "Natur", + "sv": "Natur", + "pt": "Natureza", + "ko": "네이처", + "ja": "ネイチャー", + "en": "Nature", + "it": "Naturale", + "fr": "Nature", + "hu": "Natúr", + "zh": "半透明", + "nl": "Natuurlijk", + "es": "Naturaleza" + }, + "color_code": "C0", + "fila_color": [ + "#00000000" + ] + }, + { + "fila_color_code": "65103", + "fila_id": "GFS05", + "fila_color_type": "单色", + "fila_type": "Support for PLA/PETG", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "66100", + "fila_id": "GFS06", + "fila_color_type": "单色", + "fila_type": "Support for ABS", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "71100", + "fila_id": "GFT01", + "fila_color_type": "单色", + "fila_type": "PET-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "76100", + "fila_id": "GFT02", + "fila_color_type": "单色", + "fila_type": "PPS-CF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "51600", + "fila_id": "GFU00", + "fila_color_type": "单色", + "fila_type": "TPU 95A HF", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#0072CEFF" + ] + }, + { + "fila_color_code": "51101", + "fila_id": "GFU00", + "fila_color_type": "单色", + "fila_type": "TPU 95A HF", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#898D8DFF" + ] + }, + { + "fila_color_code": "51100", + "fila_id": "GFU00", + "fila_color_type": "单色", + "fila_type": "TPU 95A HF", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#101820FF" + ] + }, + { + "fila_color_code": "51200", + "fila_id": "GFU00", + "fila_color_type": "单色", + "fila_type": "TPU 95A HF", + "fila_color_name": { + "de": "Rot", + "sv": "Röd", + "pt": "Vermelho", + "ko": "레드", + "ja": "レッド", + "en": "Red", + "it": "Rosso", + "fr": "Rouge", + "hu": "Piros", + "zh": "红色", + "nl": "Rood", + "es": "Rojo" + }, + "color_code": "R0", + "fila_color": [ + "#C8102EFF" + ] + }, + { + "fila_color_code": "51102", + "fila_id": "GFU00", + "fila_color_type": "单色", + "fila_type": "TPU 95A HF", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "51400", + "fila_id": "GFU00", + "fila_color_type": "单色", + "fila_type": "TPU 95A HF", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#F3E600FF" + ] + }, + { + "fila_color_code": "50101", + "fila_id": "GFU01", + "fila_color_type": "单色", + "fila_type": "TPU 95A", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "50100", + "fila_id": "GFU01", + "fila_color_type": "单色", + "fila_type": "TPU 95A", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "53600", + "fila_id": "GFU02", + "fila_color_type": "单色", + "fila_type": "TPU for AMS", + "fila_color_name": { + "de": "Blau", + "sv": "Blå", + "pt": "Azul", + "ko": "블루", + "ja": "ブルー", + "en": "Blue", + "it": "Blu", + "fr": "Bleu", + "hu": "Kék", + "zh": "蓝色", + "nl": "Blauw", + "es": "Azul" + }, + "color_code": "B0", + "fila_color": [ + "#5898DDFF" + ] + }, + { + "fila_color_code": "53102", + "fila_id": "GFU02", + "fila_color_type": "单色", + "fila_type": "TPU for AMS", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#939393FF" + ] + }, + { + "fila_color_code": "53500", + "fila_id": "GFU02", + "fila_color_type": "单色", + "fila_type": "TPU for AMS", + "fila_color_name": { + "de": "Neongrün", + "sv": "Neongrön", + "pt": "Verde-neon", + "ko": "네온 그린", + "ja": "ネオン グリーン", + "en": "Neon Green", + "it": "Verde neon", + "fr": "Vert fluo", + "hu": "Neonzöld", + "zh": "荧光绿", + "nl": "Neongroen", + "es": "Verde neón" + }, + "color_code": "G0", + "fila_color": [ + "#90FF1AFF" + ] + }, + { + "fila_color_code": "53101", + "fila_id": "GFU02", + "fila_color_type": "单色", + "fila_type": "TPU for AMS", + "fila_color_name": { + "de": "Schwarz", + "sv": "Svart", + "pt": "Preto", + "ko": "블랙", + "ja": "ブラック", + "en": "Black", + "it": "Nero", + "fr": "Noir", + "hu": "Fekete", + "zh": "黑色", + "nl": "Zwart", + "es": "Negro" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "53200", + "fila_id": "GFU02", + "fila_color_type": "单色", + "fila_type": "TPU for AMS", + "fila_color_name": { + "de": "Rot", + "sv": "Röd", + "pt": "Vermelho", + "ko": "레드", + "ja": "レッド", + "en": "Red", + "it": "Rosso", + "fr": "Rouge", + "hu": "Piros", + "zh": "红色", + "nl": "Rood", + "es": "Rojo" + }, + "color_code": "R0", + "fila_color": [ + "#ED0000FF" + ] + }, + { + "fila_color_code": "53100", + "fila_id": "GFU02", + "fila_color_type": "单色", + "fila_type": "TPU for AMS", + "fila_color_name": { + "de": "Weiß", + "sv": "Vit", + "pt": "Branco", + "ko": "화이트", + "ja": "ホワイト", + "en": "White", + "it": "Bianco", + "fr": "Blanc", + "hu": "Fehér", + "zh": "白色", + "nl": "Wit", + "es": "Blanco" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "53400", + "fila_id": "GFU02", + "fila_color_type": "单色", + "fila_type": "TPU for AMS", + "fila_color_name": { + "de": "Gelb", + "sv": "Gul", + "pt": "Amarelo", + "ko": "옐로우", + "ja": "イエロー", + "en": "Yellow", + "it": "Giallo", + "fr": "Jaune", + "hu": "Sárga", + "zh": "黄色", + "nl": "Geel", + "es": "Amarillo" + }, + "color_code": "Y0", + "fila_color": [ + "#F9EF41FF" + ] + }, + { + "fila_color_code": "16100", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Black", + "it": "", + "fr": "", + "hu": "", + "zh": "黑色", + "nl": "", + "es": "" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "16400", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Yellow", + "it": "", + "fr": "", + "hu": "", + "zh": "黄色", + "nl": "", + "es": "" + }, + "color_code": "Y0", + "fila_color": [ + "#EFE255FF" + ] + }, + { + "fila_color_code": "16103", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "White", + "it": "", + "fr": "", + "hu": "", + "zh": "白色", + "nl": "", + "es": "" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "16600", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Cyan", + "it": "", + "fr": "", + "hu": "", + "zh": "天蓝色", + "nl": "", + "es": "" + }, + "color_code": "B0", + "fila_color": [ + "#4DAFDAFF" + ] + }, + { + "fila_color_code": "16200", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Red", + "it": "", + "fr": "", + "hu": "", + "zh": "深红色", + "nl": "", + "es": "" + }, + "color_code": "R0", + "fila_color": [ + "#C6001AFF" + ] + }, + { + "fila_color_code": "16101", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "Grau", + "sv": "Grå", + "pt": "Cinza", + "ko": "그레이", + "ja": "グレー", + "en": "Gray", + "it": "Grigio", + "fr": "Gris", + "hu": "Szürke", + "zh": "灰色", + "nl": "Grijs", + "es": "Gris" + }, + "color_code": "D0", + "fila_color": [ + "#999D9DFF" + ] + }, + { + "fila_color_code": "13210", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Red", + "it": "", + "fr": "", + "hu": "", + "zh": "透明红", + "nl": "", + "es": "" + }, + "color_code": "R0", + "fila_color": [ + "#B5001180" + ] + }, + { + "fila_color_code": "13211", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Cherry Pink", + "it": "", + "fr": "", + "hu": "", + "zh": "果冻粉", + "nl": "", + "es": "" + }, + "color_code": "R1", + "fila_color": [ + "#F5B6CD80" + ] + }, + { + "fila_color_code": "13301", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Orange", + "it": "", + "fr": "", + "hu": "", + "zh": "透明橙", + "nl": "", + "es": "" + }, + "color_code": "A0", + "fila_color": [ + "#F74E0280" + ] + }, + { + "fila_color_code": "13410", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Mellow Yellow", + "it": "", + "fr": "", + "hu": "", + "zh": "黄水晶", + "nl": "", + "es": "" + }, + "color_code": "Y0", + "fila_color": [ + "#F5DBAB80" + ] + }, + { + "fila_color_code": "13510", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Light Jade", + "it": "", + "fr": "", + "hu": "", + "zh": "浅青玉", + "nl": "", + "es": "" + }, + "color_code": "G0", + "fila_color": [ + "#96D8AF80" + ] + }, + { + "fila_color_code": "13610", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Ice Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "冰蓝", + "nl": "", + "es": "" + }, + "color_code": "B0", + "fila_color": [ + "#B8CDE980" + ] + }, + { + "fila_color_code": "13611", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "透明蓝", + "nl": "", + "es": "" + }, + "color_code": "B1", + "fila_color": [ + "#0047BB80" + ] + }, + { + "fila_color_code": "13612", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Teal", + "it": "", + "fr": "", + "hu": "", + "zh": "蓝绿色", + "nl": "", + "es": "" + }, + "color_code": "B2", + "fila_color": [ + "#009FA180" + ] + }, + { + "fila_color_code": "13710", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Purple", + "it": "", + "fr": "", + "hu": "", + "zh": "透明紫", + "nl": "", + "es": "" + }, + "color_code": "P0", + "fila_color": [ + "#8344B080" + ] + }, + { + "fila_color_code": "13711", + "fila_id": "GFA17", + "fila_color_type": "单色", + "fila_type": "PLA Translucent", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Lavender", + "it": "", + "fr": "", + "hu": "", + "zh": "紫罗兰", + "nl": "", + "es": "" + }, + "color_code": "P1", + "fila_color": [ + "#B8ACD680" + ] + }, + { + "fila_color_code": "13906", + "fila_id": "GFA05", + "fila_color_type": "渐变色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "South Beach", + "it": "", + "fr": "", + "hu": "", + "zh": "马卡龙", + "nl": "", + "es": "" + }, + "color_code": "M1", + "fila_color": [ + "#F772A4FF", + "#00918BFF" + ] + }, + { + "fila_color_code": "13909", + "fila_id": "GFA05", + "fila_color_type": "渐变色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Aurora Purple", + "it": "", + "fr": "", + "hu": "", + "zh": "星云紫", + "nl": "", + "es": "" + }, + "color_code": "M4", + "fila_color": [ + "#7F3696FF", + "#006EC9FF" + ] + }, + { + "fila_color_code": "13912", + "fila_id": "GFA05", + "fila_color_type": "渐变色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Dawn Radiance", + "it": "", + "fr": "", + "hu": "", + "zh": "浅彩虹", + "nl": "", + "es": "" + }, + "color_code": "M8", + "fila_color": [ + "#EC984CFF", + "#6CD4BCFF", + "#A66EB9FF", + "#D87694FF" + ] + }, + { + "fila_color_code": "51103", + "fila_id": "GFU03", + "fila_color_type": "单色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Black", + "it": "", + "fr": "", + "hu": "", + "zh": "黑色", + "nl": "", + "es": "" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "51105", + "fila_id": "GFU03", + "fila_color_type": "单色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "White", + "it": "", + "fr": "", + "hu": "", + "zh": "白色", + "nl": "", + "es": "" + }, + "color_code": "W1", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "51305", + "fila_id": "GFU04", + "fila_color_type": "单色", + "fila_type": "TPU 85A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Neon Orange", + "it": "", + "fr": "", + "hu": "", + "zh": "暖橙色", + "nl": "", + "es": "" + }, + "color_code": "A1", + "fila_color": [ + "#F68B1BFF" + ] + }, + { + "fila_color_code": "51500", + "fila_id": "GFU04", + "fila_color_type": "单色", + "fila_type": "TPU 85A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Light Cyan", + "it": "", + "fr": "", + "hu": "", + "zh": "苍青色", + "nl": "", + "es": "" + }, + "color_code": "G0", + "fila_color": [ + "#C3E2D6FF" + ] + }, + { + "fila_color_code": "51900", + "fila_id": "GFU03", + "fila_color_type": "渐变色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Frozen", + "it": "", + "fr": "", + "hu": "", + "zh": "冰封蓝", + "nl": "", + "es": "" + }, + "color_code": "M0", + "fila_color": [ + "#40B6E4FF", + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "51901", + "fila_id": "GFU03", + "fila_color_type": "渐变色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Blaze", + "it": "", + "fr": "", + "hu": "", + "zh": "西瓜红", + "nl": "", + "es": "" + }, + "color_code": "M1", + "fila_color": [ + "#D21B3CFF", + "#F1AAA8FF" + ] + }, + { + "fila_color_code": "65104", + "fila_id": "GFS02", + "fila_color_type": "单色", + "fila_type": "Support for PLA", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "White", + "it": "", + "fr": "", + "hu": "", + "zh": "白色", + "nl": "", + "es": "" + }, + "color_code": "W1", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "12104", + "fila_id": "GFA10", + "fila_color_type": "单色", + "fila_type": "PLA Tough+", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Black", + "it": "", + "fr": "", + "hu": "", + "zh": "黑色", + "nl": "", + "es": "" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "12105", + "fila_id": "GFA10", + "fila_color_type": "单色", + "fila_type": "PLA Tough+", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Gray", + "it": "", + "fr": "", + "hu": "", + "zh": "浅灰色", + "nl": "", + "es": "" + }, + "color_code": "D0", + "fila_color": [ + "#AFB1AEFF" + ] + }, + { + "fila_color_code": "12106", + "fila_id": "GFA10", + "fila_color_type": "单色", + "fila_type": "PLA Tough+", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Silver", + "it": "", + "fr": "", + "hu": "", + "zh": "银色", + "nl": "", + "es": "" + }, + "color_code": "D1", + "fila_color": [ + "#959698FF" + ] + }, + { + "fila_color_code": "12107", + "fila_id": "GFA10", + "fila_color_type": "单色", + "fila_type": "PLA Tough+", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "White", + "it": "", + "fr": "", + "hu": "", + "zh": "白色", + "nl": "", + "es": "" + }, + "color_code": "W0", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "12301", + "fila_id": "GFA10", + "fila_color_type": "单色", + "fila_type": "PLA Tough+", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Orange", + "it": "", + "fr": "", + "hu": "", + "zh": "橙色", + "nl": "", + "es": "" + }, + "color_code": "A0", + "fila_color": [ + "#DC3A27FF" + ] + }, + { + "fila_color_code": "12401", + "fila_id": "GFA10", + "fila_color_type": "单色", + "fila_type": "PLA Tough+", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Yellow", + "it": "", + "fr": "", + "hu": "", + "zh": "亮黄色", + "nl": "", + "es": "" + }, + "color_code": "Y0", + "fila_color": [ + "#F4D53FFF" + ] + }, + { + "fila_color_code": "12601", + "fila_id": "GFA10", + "fila_color_type": "单色", + "fila_type": "PLA Tough+", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Cyan", + "it": "", + "fr": "", + "hu": "", + "zh": "天蓝色", + "nl": "", + "es": "" + }, + "color_code": "B0", + "fila_color": [ + "#009BD8FF" + ] + }, + { + "fila_color_code": "13100", + "fila_id": "GFA02", + "fila_color_type": "单色", + "fila_type": "PLA Metal", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Iron Gray Metallic", + "it": "", + "fr": "", + "hu": "", + "zh": "深空灰", + "nl": "", + "es": "" + }, + "color_code": "D2", + "fila_color": [ + "#43403DFF" + ] + }, + { + "fila_color_code": "13400", + "fila_id": "GFA02", + "fila_color_type": "单色", + "fila_type": "PLA Metal", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Iridium Gold Metallic", + "it": "", + "fr": "", + "hu": "", + "zh": "香槟金", + "nl": "", + "es": "" + }, + "color_code": "Y1", + "fila_color": [ + "#B39B84FF" + ] + }, + { + "fila_color_code": "13500", + "fila_id": "GFA02", + "fila_color_type": "单色", + "fila_type": "PLA Metal", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Oxide Green Metallic", + "it": "", + "fr": "", + "hu": "", + "zh": "极光绿", + "nl": "", + "es": "" + }, + "color_code": "G2", + "fila_color": [ + "#1D7C6AFF" + ] + }, + { + "fila_color_code": "13600", + "fila_id": "GFA02", + "fila_color_type": "单色", + "fila_type": "PLA Metal", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Cobalt Blue Metallic", + "it": "", + "fr": "", + "hu": "", + "zh": "典雅蓝", + "nl": "", + "es": "" + }, + "color_code": "B2", + "fila_color": [ + "#39699EFF" + ] + }, + { + "fila_color_code": "13800", + "fila_id": "GFA02", + "fila_color_type": "单色", + "fila_type": "PLA Metal", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Copper Brown Metallic", + "it": "", + "fr": "", + "hu": "", + "zh": "咖啡金", + "nl": "", + "es": "" + }, + "color_code": "N3", + "fila_color": [ + "#AA6443FF" + ] + }, + { + "fila_color_code": "16601", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "蓝色", + "nl": "", + "es": "" + }, + "color_code": "B1", + "fila_color": [ + "#004EA8FF" + ] + }, + { + "fila_color_code": "16401", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Sunflower Yellow", + "it": "", + "fr": "", + "hu": "", + "zh": "橙黄色", + "nl": "", + "es": "" + }, + "color_code": "Y1", + "fila_color": [ + "#FFB549FF" + ] + }, + { + "fila_color_code": "16501", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Green", + "it": "", + "fr": "", + "hu": "", + "zh": "绿色", + "nl": "", + "es": "" + }, + "color_code": "G1", + "fila_color": [ + "#00BB31FF" + ] + }, + { + "fila_color_code": "16301", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Orange", + "it": "", + "fr": "", + "hu": "", + "zh": "橙色", + "nl": "", + "es": "" + }, + "color_code": "A1", + "fila_color": [ + "#FF671FFF" + ] + }, + { + "fila_color_code": "16700", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Matte Beige", + "it": "", + "fr": "", + "hu": "", + "zh": "浅肤色", + "nl": "", + "es": "" + }, + "color_code": "P0", + "fila_color": [ + "#ECC3B2FF" + ] + }, + { + "fila_color_code": "16800", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Cocoa Brown", + "it": "", + "fr": "", + "hu": "", + "zh": "棕色", + "nl": "", + "es": "" + }, + "color_code": "N0", + "fila_color": [ + "#745335FF" + ] + }, + { + "fila_color_code": "16102", + "fila_id": "GFA18", + "fila_color_type": "单色", + "fila_type": "PLA Lite", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Dark Gray", + "it": "", + "fr": "", + "hu": "", + "zh": "深灰", + "nl": "", + "es": "" + }, + "color_code": "D1", + "fila_color": [ + "#8c8b8cFF" + ] + }, + { + "fila_color_code": "13913", + "fila_id": "GFA05", + "fila_color_type": "多拼色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Mystic Magenta", + "it": "", + "fr": "", + "hu": "", + "zh": "北极光", + "nl": "", + "es": "" + }, + "color_code": "T7", + "fila_color": [ + "#720062FF", + "#3a913fFF" + ] + }, + { + "fila_color_code": "13916", + "fila_id": "GFA05", + "fila_color_type": "多拼色", + "fila_type": "PLA Silk", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Phantom Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "幻影蓝", + "nl": "", + "es": "" + }, + "color_code": "T9", + "fila_color": [ + "#00629bFF", + "#000000FF" + ] + }, + { + "fila_color_code": "51601", + "fila_id": "GFU03", + "fila_color_type": "单色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Crystal Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "水晶蓝", + "nl": "", + "es": "" + }, + "color_code": "B1", + "fila_color": [ + "#7eb4e180" + ] + }, + { + "fila_color_code": "51106", + "fila_id": "GFU03", + "fila_color_type": "单色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Quicksilver", + "it": "", + "fr": "", + "hu": "", + "zh": "水银色", + "nl": "", + "es": "" + }, + "color_code": "D0", + "fila_color": [ + "#9ea2a2FF" + ] + }, + { + "fila_color_code": "51201", + "fila_id": "GFU04", + "fila_color_type": "单色", + "fila_type": "TPU 85A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Rose Beige/Flesh", + "it": "", + "fr": "", + "hu": "", + "zh": "肤色", + "nl": "", + "es": "" + }, + "color_code": "P0", + "fila_color": [ + "#F3CFB2FF" + ] + }, + { + "fila_color_code": "51700", + "fila_id": "GFU03", + "fila_color_type": "单色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Grape Jelly", + "it": "", + "fr": "", + "hu": "", + "zh": "果冻紫", + "nl": "", + "es": "" + }, + "color_code": "P1", + "fila_color": [ + "#D6ABFF80" + ] + }, + { + "fila_color_code": "51107", + "fila_id": "GFU04", + "fila_color_type": "单色", + "fila_type": "TPU 85A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Black", + "it": "", + "fr": "", + "hu": "", + "zh": "黑色", + "nl": "", + "es": "" + }, + "color_code": "K0", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "51501", + "fila_id": "GFU04", + "fila_color_type": "单色", + "fila_type": "TPU 85A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Lime Green", + "it": "", + "fr": "", + "hu": "", + "zh": "苹果绿", + "nl": "", + "es": "" + }, + "color_code": "G1", + "fila_color": [ + "#CDEA80FF" + ] + }, + { + "fila_color_code": "51800", + "fila_id": "GFU03", + "fila_color_type": "单色", + "fila_type": "TPU 90A", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Cocoa Brown", + "it": "", + "fr": "", + "hu": "", + "zh": "皮革棕", + "nl": "", + "es": "" + }, + "color_code": "N0", + "fila_color": [ + "#5C4738FF" + ] + }, + { + "fila_color_code": "30105", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Black", + "it": "", + "fr": "", + "hu": "", + "zh": "黑色", + "nl": "", + "es": "" + }, + "color_code": "K00", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "30106", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "White", + "it": "", + "fr": "", + "hu": "", + "zh": "白色", + "nl": "", + "es": "" + }, + "color_code": "W00", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "30107", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Gray", + "it": "", + "fr": "", + "hu": "", + "zh": "灰色", + "nl": "", + "es": "" + }, + "color_code": "D00", + "fila_color": [ + "#7F7E83FF" + ] + }, + { + "fila_color_code": "30402", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Yellow", + "it": "", + "fr": "", + "hu": "", + "zh": "黄色", + "nl": "", + "es": "" + }, + "color_code": "Y00", + "fila_color": [ + "#FCE300FF" + ] + }, + { + "fila_color_code": "30201", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Red", + "it": "", + "fr": "", + "hu": "", + "zh": "红色", + "nl": "", + "es": "" + }, + "color_code": "R00", + "fila_color": [ + "#D6001CFF" + ] + }, + { + "fila_color_code": "30603", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Reflex Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "深蓝色", + "nl": "", + "es": "" + }, + "color_code": "B00", + "fila_color": [ + "#001489FF" + ] + }, + { + "fila_color_code": "30800", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Dark Brown", + "it": "", + "fr": "", + "hu": "", + "zh": "深棕色", + "nl": "", + "es": "" + }, + "color_code": "N00", + "fila_color": [ + "#4f2c1dFF" + ] + }, + { + "fila_color_code": "30502", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Green", + "it": "", + "fr": "", + "hu": "", + "zh": "绿色", + "nl": "", + "es": "" + }, + "color_code": "G00", + "fila_color": [ + "#009639FF" + ] + }, + { + "fila_color_code": "30301", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Orange", + "it": "", + "fr": "", + "hu": "", + "zh": "橙色", + "nl": "", + "es": "" + }, + "color_code": "A00", + "fila_color": [ + "#FF671FFF" + ] + }, + { + "fila_color_code": "30503", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Pine Green", + "it": "", + "fr": "", + "hu": "", + "zh": "墨绿色", + "nl": "", + "es": "" + }, + "color_code": "G01", + "fila_color": [ + "#034638FF" + ] + }, + { + "fila_color_code": "30604", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Navy Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "湖蓝色", + "nl": "", + "es": "" + }, + "color_code": "B01", + "fila_color": [ + "#0086d6FF" + ] + }, + { + "fila_color_code": "30108", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Misty Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "蓝灰色", + "nl": "", + "es": "" + }, + "color_code": "D01", + "fila_color": [ + "#688197FF" + ] + }, + { + "fila_color_code": "30403", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Dark Beige", + "it": "", + "fr": "", + "hu": "", + "zh": "深米色", + "nl": "", + "es": "" + }, + "color_code": "Y01", + "fila_color": [ + "#dbc8b6FF" + ] + }, + { + "fila_color_code": "17100", + "fila_id": "GFA19", + "fila_color_type": "单色", + "fila_type": "PLA Pure", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Pure White", + "it": "", + "fr": "", + "hu": "", + "zh": "纯净白", + "nl": "", + "es": "" + }, + "color_code": "W00", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "17101", + "fila_id": "GFA19", + "fila_color_type": "单色", + "fila_type": "PLA Pure", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Absolute Black", + "it": "", + "fr": "", + "hu": "", + "zh": "纯净黑", + "nl": "", + "es": "" + }, + "color_code": "K00", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "17200", + "fila_id": "GFA19", + "fila_color_type": "单色", + "fila_type": "PLA Pure", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Milky Pink", + "it": "", + "fr": "", + "hu": "", + "zh": "水玉粉", + "nl": "", + "es": "" + }, + "color_code": "P00", + "fila_color": [ + "#f7ced7FF" + ] + }, + { + "fila_color_code": "17600", + "fila_id": "GFA19", + "fila_color_type": "单色", + "fila_type": "PLA Pure", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Baby Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "雪山蓝", + "nl": "", + "es": "" + }, + "color_code": "B00", + "fila_color": [ + "#a4dbe8FF" + ] + }, + { + "fila_color_code": "17300", + "fila_id": "GFA19", + "fila_color_type": "单色", + "fila_type": "PLA Pure", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Apricot", + "it": "", + "fr": "", + "hu": "", + "zh": "杏子黄", + "nl": "", + "es": "" + }, + "color_code": "A00", + "fila_color": [ + "#ffb673FF" + ] + }, + { + "fila_color_code": "30701", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Purple", + "it": "", + "fr": "", + "hu": "", + "zh": "紫色", + "nl": "", + "es": "" + }, + "color_code": "P01", + "fila_color": [ + "#8A75D1FF" + ] + }, + { + "fila_color_code": "30404", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Sunflower Yellow", + "it": "", + "fr": "", + "hu": "", + "zh": "芒果橙", + "nl": "", + "es": "" + }, + "color_code": "Y04", + "fila_color": [ + "#FFB81CFF" + ] + }, + { + "fila_color_code": "30504", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Bright Green", + "it": "", + "fr": "", + "hu": "", + "zh": "苹果绿", + "nl": "", + "es": "" + }, + "color_code": "G04", + "fila_color": [ + "#97D700FF" + ] + }, + { + "fila_color_code": "30702", + "fila_id": "GFG00", + "fila_color_type": "单色", + "fila_type": "PETG Basic", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Hot Pink", + "it": "", + "fr": "", + "hu": "", + "zh": "粉紫色", + "nl": "", + "es": "" + }, + "color_code": "P02", + "fila_color": [ + "#F277C6FF" + ] + }, + { + "fila_color_code": "35100", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "White", + "it": "", + "fr": "", + "hu": "", + "zh": "白色", + "nl": "", + "es": "" + }, + "color_code": "W00", + "fila_color": [ + "#FFFFFFFF" + ] + }, + { + "fila_color_code": "35101", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Black", + "it": "", + "fr": "", + "hu": "", + "zh": "黑色", + "nl": "", + "es": "" + }, + "color_code": "K00", + "fila_color": [ + "#000000FF" + ] + }, + { + "fila_color_code": "35500", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Lime", + "it": "", + "fr": "", + "hu": "", + "zh": "黄绿色", + "nl": "", + "es": "" + }, + "color_code": "G00", + "fila_color": [ + "#c0df16FF" + ] + }, + { + "fila_color_code": "35102", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Gray", + "it": "", + "fr": "", + "hu": "", + "zh": "灰色", + "nl": "", + "es": "" + }, + "color_code": "D00", + "fila_color": [ + "#7F7E83FF" + ] + }, + { + "fila_color_code": "35700", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Pink", + "it": "", + "fr": "", + "hu": "", + "zh": "粉色", + "nl": "", + "es": "" + }, + "color_code": "P00", + "fila_color": [ + "#FABBCBFF" + ] + }, + { + "fila_color_code": "35600", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Baby Blue", + "it": "", + "fr": "", + "hu": "", + "zh": "浅蓝色", + "nl": "", + "es": "" + }, + "color_code": "B00", + "fila_color": [ + "#B9D9EBFF" + ] + }, + { + "fila_color_code": "35702", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Violet", + "it": "", + "fr": "", + "hu": "", + "zh": "紫罗兰", + "nl": "", + "es": "" + }, + "color_code": "P02", + "fila_color": [ + "#A7A4E0FF" + ] + }, + { + "fila_color_code": "35501", + "fila_id": "GFG03", + "fila_color_type": "单色", + "fila_type": "PETG Matte", + "fila_color_name": { + "de": "", + "sv": "", + "pt": "", + "ko": "", + "ja": "", + "en": "Avocado Green", + "it": "", + "fr": "", + "hu": "", + "zh": "牛油果绿", + "nl": "", + "es": "" + }, + "color_code": "G01", + "fila_color": [ + "#bce194FF" + ] + } + ], + "total": 318 +} \ No newline at end of file diff --git a/resources/profiles/BBL/filament/support_recommended_params.json b/resources/profiles/BBL/filament/support_recommended_params.json new file mode 100644 index 0000000000..18bfcb48a7 --- /dev/null +++ b/resources/profiles/BBL/filament/support_recommended_params.json @@ -0,0 +1,263 @@ +{ + "type": "filament", + "description": "Recommended support parameters for specific material combinations. support_material_type/model_material_type can be 'name' or 'type'", + "combinations": [ + { + "model_material": "PLA", + "model_material_type": "type", + "support_material_list": [ + "Bambu Support For PLA/PETG", + "Bambu Support For PLA" + ], + "support_material_type": "name", + "priority": 3, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_style": "tree_hybrid", + "support_threshold_angle": 35, + "support_on_build_plate_only": false, + "raft_first_layer_expansion": 5.0, + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0, + "tree_support_branch_diameter": 3.0, + "tree_support_branch_diameter_angle": 7.0, + "support_interface_speed": [ + 50.0, + 50.0, + 50.0, + 50.0 + ] + } + }, + { + "model_material": "PLA", + "model_material_type": "type", + "support_material_list": [ + "PETG" + ], + "support_material_type": "type", + "priority": 1, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_style": "tree_hybrid", + "support_threshold_angle": 35, + "support_on_build_plate_only": false, + "raft_first_layer_expansion": 5.0, + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0, + "tree_support_branch_diameter": 3.0, + "tree_support_branch_diameter_angle": 7.0, + "support_interface_speed": [ + 50.0, + 50.0, + 50.0, + 50.0 + ] + } + }, + { + "model_material": "PLA", + "model_material_type": "type", + "support_material_list": [ + "PVA" + ], + "support_material_type": "type", + "priority": 2, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_on_build_plate_only": false, + "support_top_z_distance": 0.0, + "support_bottom_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0, + "support_object_xy_distance": 0.0 + } + }, + { + "model_material": "PETG", + "model_material_type": "type", + "support_material_list": [ + "Bambu Support For PLA/PETG" + ], + "support_material_type": "name", + "priority": 3, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_style": "tree_hybrid", + "support_threshold_angle": 35, + "support_on_build_plate_only": false, + "raft_first_layer_expansion": 5.0, + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0, + "tree_support_branch_diameter": 3.0, + "tree_support_branch_diameter_angle": 7.0, + "support_interface_speed": [ + 50.0, + 50.0, + 50.0, + 50.0 + ] + } + }, + { + "model_material": "PETG", + "model_material_type": "type", + "support_material_list": [ + "PLA" + ], + "support_material_type": "type", + "priority": 1, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_style": "tree_hybrid", + "support_threshold_angle": 35, + "support_on_build_plate_only": false, + "raft_first_layer_expansion": 5.0, + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0, + "tree_support_branch_diameter": 3.0, + "tree_support_branch_diameter_angle": 7.0, + "support_interface_speed": [ + 50.0, + 50.0, + 50.0, + 50.0 + ] + } + }, + { + "model_material": "ABS", + "model_material_type": "type", + "support_material_list": [ + "Bambu Support for ABS" + ], + "support_material_type": "name", + "priority": 3, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_on_build_plate_only": false, + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0 + } + }, + { + "model_material": "PA", + "model_material_type": "type", + "support_material_list": [ + "Bambu Support For PA/PET", + "Bambu ASA", + "Bambu ABS" + ], + "support_material_type": "name", + "priority": 3, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_style": "tree_hybrid", + "support_on_build_plate_only": false, + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0 + } + }, + { + "model_material": "TPU", + "model_material_type": "type", + "support_material_list": [ + "PLA" + ], + "support_material_type": "type", + "priority": 2, + "recommended_params": { + "enable_support": true, + "support_type": "tree(auto)", + "support_on_build_plate_only": false, + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0, + "support_object_xy_distance": 0.0 + } + }, + { + "model_material": "Bambu PA6-GF", + "model_material_type": "name", + "support_material_list": [ + "ABS" + ], + "support_material_type": "type", + "priority": 2, + "recommended_params": { + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0 + } + }, + { + "model_material": "Bambu PET-CF", + "model_material_type": "name", + "support_material_list": [ + "ASA" + ], + "support_material_type": "type", + "priority": 2, + "recommended_params": { + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0 + } + }, + { + "model_material": "Bambu PPA-CF", + "model_material_type": "name", + "support_material_list": [ + "ASA" + ], + "support_material_type": "type", + "priority": 2, + "recommended_params": { + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0 + } + }, + { + "model_material": "Bambu PAHT-CF", + "model_material_type": "name", + "support_material_list": [ + "ASA" + ], + "support_material_type": "type", + "priority": 2, + "recommended_params": { + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0 + } + }, + { + "model_material": "Bambu PA6-CF", + "model_material_type": "name", + "support_material_list": [ + "ASA" + ], + "support_material_type": "type", + "priority": 2, + "recommended_params": { + "support_top_z_distance": 0.0, + "support_interface_pattern": "rectilinear_interlaced", + "support_interface_spacing": 0.0 + } + } + ] +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json index 7dc3281418..469834f156 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.2 nozzle.json @@ -1,29 +1,32 @@ { - "type": "machine", - "name": "Bambu Lab A1 0.2 nozzle", - "inherits": "Bambu Lab A1 0.4 nozzle", - "from": "system", - "setting_id": "GM029", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab A1", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL A1 0.2 nozzle", - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A1 0.2 nozzle", + "inherits": "Bambu Lab A1 0.4 nozzle", + "from": "system", + "setting_id": "GM029", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab A1", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL A1 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..3c415c212b --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";===== A1 20251031 =======================\nM1007 S0 ; turn off mass estimation\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X267 F18000\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F1200\n{else}\nM620.11 S0\n{endif}\nM400\n\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nM620.10 A0 F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60} L[flush_length] H[nozzle_diameter] T{flush_temperatures[next_extruder]}\n\nG1 Y128 F9000\n\n{if next_extruder < 255}\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\n\nM400\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[flush_temperatures[next_extruder]]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E6 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM622.1 S0\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n G92 E0\n G1 E-[new_retract_length_toolchange] F1800\n M400\n \n M106 P1 S178\n M400 S4\n G1 X-38.2 F18000\n G1 X-48.2 F3000\n G1 X-38.2 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-38.2 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0 \nM623\n\nM621 S[next_extruder]A\nG392 S0\n\nM1007 S1\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..42e7835633 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..ea1cf17af5 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== date: 20260513 =====================\nG392 S0 ;turn off nozzle clog detect\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X267 F15000\nT255\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 256}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z256 F600\n G1 Z256\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-48 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A44 B20 L100 C49 D20 M80 E41 F20 N80\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N80\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n;=====printer finish sound=========\n\n;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM400\nM18 X Y Z\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..e5fc622ad8 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: A1 =========================\n;===== date: 20260513 ==================\nG392 S0\nM9833.2\n;M400\n;M73 P1.717\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\n\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A43 B10 L100 C46 D10 M70 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C43 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C41 D10 M80 E41 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E44 F10 N80\nM1006 A0 B10 L100 C49 D10 M80 E49 F10 N80\nM1006 A0 B10 L100 C0 D10 M80 E0 F10 N80\nM1006 A44 B10 L100 C48 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A43 B10 L100 C46 D10 M60 E39 F10 N80\nM1006 W\nM18 \n;=====start printer sound ===================\n\n;=====avoid end stop =================\nG91\nG380 S2 Z40 F1200\nG380 S3 Z-15 F1200\nG90\n\n;===== reset machine status =================\n;M290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.65 Y1.2 Z0.6 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;M211 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\nM1002 gcode_claim_action : 13\n\nG28 X\nG91\nG1 Z5 F1200\nG90\nG0 X128 F30000\nG0 Y254 F3000\nG91\nG1 Z-5 F1200\n\nM109 S25 H140\n\nM17 E0.3\nM83\nG1 E10 F1200\nG1 E-0.5 F30\nM17 D\n\nG28 Z P0 T140; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n G90\n G1 Z5 F1200\nM623\n\n;M400\n;M73 P1.717\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 24\n\nM400\n;G392 S1\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on\n\nG90\nG1 X-28.5 F30000\nG1 X-48.2 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n{if (filament_type[initial_no_support_extruder] == \"PLA\") && (nozzle_diameter != 0.2)}\n M104 S220\n{else}\n M104 S250\n{endif}\n M400\n T[initial_no_support_extruder]\n G1 X-48.2 F3000\n M400\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") && (nozzle_diameter != 0.2)}\n M620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T220\n M109 S220 ;set nozzle to common flush temp\n{else}\n M620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n{endif}\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") && (nozzle_diameter != 0.2)}\n M109 S220 H300\n{else}\n M109 S{flush_temperatures[initial_no_support_extruder]} H300\n{endif}\nG92 E0\nG1 E50 F200 ; lower extrusion speed to avoid clog\nM400\nM106 P1 S178\nG92 E0\nG1 E5 F200\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG92 E0\nG1 E-0.5 F300\n\nG1 X-28.5 F30000\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\n\n;G392 S0\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n;M400\n;M73 P1.717\n\n;===== auto extrude cali start =========================\nM975 S1\n;G392 S1\n\nG90\nM83\nT1000\nG1 X-48.2 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\n\nM622 J1\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_extruder]}\n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-48.2 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4} H[nozzle_diameter]\n M106 P1 S178\n M400 S7\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;G392 S0\n;===== auto extrude cali end ========================\n\n;M400\n;M73 P1.717\n\nM104 S170 ; prepare to wipe nozzle\nM106 S255 ; turn on fan\n\n;===== mech mode fast check start =====================\nM1002 gcode_claim_action : 3\n\nG1 X128 Y128 F20000\nG1 Z5 F1200\nM400 P200\nM970.3 Q1 A5 K0 O3\nM974 Q1 S2 P0\n\nM970.2 Q1 K1 W58 Z0.1\nM974 S2\n\nG1 X128 Y128 F20000\nG1 Z5 F1200\nM400 P200\nM970.3 Q0 A10 K0 O1\nM974 Q0 S2 P0\n\nM970.2 Q0 K1 W78 Z0.1\nM974 S2\n\nM975 S1\nG1 F30000\nG1 X0 Y5\nG28 X ; re-home XY\n\nG1 Z4 F1200\n\n;===== mech mode fast check end =======================\n\n;M400\n;M73 P1.717\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\n\nM975 S1\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\n;===== remove waste by touching start =====\n\nM104 S170 ; set temp down to heatbed acceptable\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nG0 X108 Y-0.5 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X110 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X112 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X114 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X116 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X118 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X120 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X122 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X124 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X126 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X128 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X130 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X132 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X134 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X136 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X138 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X140 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X142 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X144 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X146 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X148 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;===== remove waste by touching end =====\n\nG1 Z10 F1200\nG0 X118 Y261 F30000\nG1 Z5 F1200\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-50}\n\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S140 ; prepare to abl\nG0 Z5 F20000\n\nG0 X128 Y261 F20000 ; move to exposed steel surface\nG0 Z-1.01 F1200 ; stop the nozzle\n\nG91\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z10 F1200\n\n;===== brush material wipe nozzle =====\n\nG90\nG1 Y250 F30000\nG1 X55\nG1 Z1.300 F1200\nG1 Y262.5 F6000\nG91\nG1 X-35 F30000\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Z5.000 F1200\n\nG90\nG1 X30 Y250.000 F30000\nG1 Z1.300 F1200\nG1 Y262.5 F6000\nG91\nG1 X35 F30000\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Z10.000 F1200\n\n;===== brush material wipe nozzle end =====\n\nG90\n;G0 X128 Y261 F20000 ; move to exposed steel surface\nG1 Y250 F30000\nG1 X138\nG1 Y261\nG0 Z-1.01 F1200 ; stop the nozzle\n\nG91\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nM109 S140\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM211 R; pop softend status\n\n;===== wipe nozzle end ================================\n\n;M400\n;M73 P1.717\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\n\nG90\nG1 Z5 F1200\nG1 X0 Y0 F30000\nG29.2 S1 ; turn on ABL\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140\nM106 S0 ; turn off fan , too noisy\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n\n;===== home after wipe mouth end =======================\n\n;M400\n;M73 P1.717\n\nG1 X108.000 Y-0.500 F30000\nG1 Z0.300 F1200\nM400\nG2814 Z0.32\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; prepare to print\n\n;===== nozzle load line ===============================\n;G90\n;M83\n;G1 Z5 F1200\n;G1 X88 Y-0.5 F20000\n;G1 Z0.3 F1200\n\n;M109 S{nozzle_temperature_initial_layer[initial_extruder]}\n\n;G1 E2 F300\n;G1 X168 E4.989 F6000\n;G1 Z1 F1200\n;===== nozzle load line end ===========================\n\n;===== extrude cali test ===============================\n\nM400\n M900 S\n M900 C\n G90\n M83\n\n M109 S{nozzle_temperature_initial_layer[initial_extruder]}\n G0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G91\n G1 X1 Z-0.300\n G1 X4\n G1 Z1 F1200\n G90\n M400\n\nM900 R\n\nM1002 judge_flag extrude_cali_flag\nM622 J1\n G90\n G1 X108.000 Y1.000 F30000\n G91\n G1 Z-0.700 F1200\n G90\n M83\n G0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G91\n G1 X1 Z-0.300\n G1 X4\n G1 Z1 F1200\n G90\n M400\nM623\n\nG1 Z0.2\n\n;M400\n;M73 P1.717\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\n;G392 S1 ; turn on clog detection\nM1007 S1 ; turn on mass estimation\nG29.4\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..7d91e7c3b0 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";===================== date: 20250206 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-48.2 F3000 ; move to safe pos\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n; SKIPTYPE: head_wrap_detect\nM622.1 S1\nM1002 judge_flag g39_3rd_layer_detect_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X261 Y250 F20000\n M400 P200\n G39 S1\n G0 Z2 F4000\n {endif}\n\n\n M622.1 S1\n M1002 judge_flag g39_detection_flag\n M622 J1\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\n M623\nM623\n; SKIPPABLE_END\n{endif}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json index c63d8f717c..ad543aa32f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.4 nozzle.json @@ -1,80 +1,83 @@ { - "type": "machine", - "name": "Bambu Lab A1 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM030", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab A1", - "printer_variant": "0.4", - "auxiliary_fan": "0", - "bed_exclude_area": [], - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1" - ], - "default_print_profile": "0.20mm Standard @BBL A1", - "enable_long_retraction_when_cut": "2", - "extruder_clearance_dist_to_rod": "56.5", - "extruder_clearance_height_to_lid": "256", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_max_radius": "73", - "grab_length": [ - "17.4" - ], - "head_wrap_detect_zone": [ - "226x224", - "256x224", - "256x256", - "226x256" - ], - "machine_load_filament_time": "25", - "machine_max_acceleration_extruding": [ - "12000", - "12000" - ], - "machine_max_acceleration_x": [ - "12000", - "12000" - ], - "machine_max_acceleration_y": [ - "12000", - "12000" - ], - "machine_max_acceleration_z": [ - "1500", - "1500" - ], - "machine_max_jerk_e": [ - "3", - "3" - ], - "machine_max_speed_z": [ - "30", - "30" - ], - "nozzle_height": "4.76", - "nozzle_type": [ - "stainless_steel" - ], - "nozzle_volume": [ - "92" - ], - "printable_height": "256", - "printer_structure": "i3", - "retract_lift_below": [ - "255" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: A1 =========================\n;===== date: 20250822 ==================\nG392 S0\nM9833.2\n;M400\n;M73 P1.717\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S140\nM140 S[bed_temperature_initial_layer_single]\n\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A43 B10 L100 C46 D10 M70 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C43 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C41 D10 M80 E41 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E44 F10 N80\nM1006 A0 B10 L100 C49 D10 M80 E49 F10 N80\nM1006 A0 B10 L100 C0 D10 M80 E0 F10 N80\nM1006 A44 B10 L100 C48 D10 M60 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A0 B10 L100 C44 D10 M80 E39 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A43 B10 L100 C46 D10 M60 E39 F10 N80\nM1006 W\nM18 \n;=====start printer sound ===================\n\n;=====avoid end stop =================\nG91\nG380 S2 Z40 F1200\nG380 S3 Z-15 F1200\nG90\n\n;===== reset machine status =================\n;M290 X39 Y39 Z8\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.65 Y1.2 Z0.6 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;M211 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\nM1002 gcode_claim_action : 13\n\nG28 X\nG91\nG1 Z5 F1200\nG90\nG0 X128 F30000\nG0 Y254 F3000\nG91\nG1 Z-5 F1200\n\nM109 S25 H140\n\nM17 E0.3\nM83\nG1 E10 F1200\nG1 E-0.5 F30\nM17 D\n\nG28 Z P0 T140; home z with low precision,permit 300deg temperature\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n G90\n G1 Z5 F1200\nM623\n\n;M400\n;M73 P1.717\n\n;===== prepare print temperature and material ==========\nM1002 gcode_claim_action : 24\n\nM400\n;G392 S1\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on\n\nG90\nG1 X-28.5 F30000\nG1 X-48.2 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-48.2 F3000\n M400\n\n M620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM109 S{flush_temperatures[initial_no_support_extruder]} H300\nG92 E0\nG1 E50 F200 ; lower extrusion speed to avoid clog\nM400\nM106 P1 S178\nG92 E0\nG1 E5 F200\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG92 E0\nG1 E-0.5 F300\n\nG1 X-28.5 F30000\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\nG1 X-28.5 F30000 ;wipe and shake\nG1 X-48.2 F3000\n\n;G392 S0\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n;M400\n;M73 P1.717\n\n;===== auto extrude cali start =========================\nM975 S1\n;G392 S1\n\nG90\nM83\nT1000\nG1 X-48.2 Y0 Z10 F10000\nM400\nM1002 set_filament_type:UNKNOWN\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\n\nM622 J1\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_extruder]}\n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S255\n M400 S5\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-48.2 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4} H[nozzle_diameter]\n M106 P1 S178\n M400 S7\n G1 X-28.5 F18000\n G1 X-48.2 F3000\n G1 X-28.5 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-28.5 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;G392 S0\n;===== auto extrude cali end ========================\n\n;M400\n;M73 P1.717\n\nM104 S170 ; prepare to wipe nozzle\nM106 S255 ; turn on fan\n\n;===== mech mode fast check start =====================\nM1002 gcode_claim_action : 3\n\nG1 X128 Y128 F20000\nG1 Z5 F1200\nM400 P200\nM970.3 Q1 A5 K0 O3\nM974 Q1 S2 P0\n\nM970.2 Q1 K1 W58 Z0.1\nM974 S2\n\nG1 X128 Y128 F20000\nG1 Z5 F1200\nM400 P200\nM970.3 Q0 A10 K0 O1\nM974 Q0 S2 P0\n\nM970.2 Q0 K1 W78 Z0.1\nM974 S2\n\nM975 S1\nG1 F30000\nG1 X0 Y5\nG28 X ; re-home XY\n\nG1 Z4 F1200\n\n;===== mech mode fast check end =======================\n\n;M400\n;M73 P1.717\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\n\nM975 S1\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\n;===== remove waste by touching start =====\n\nM104 S170 ; set temp down to heatbed acceptable\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nG0 X108 Y-0.5 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X110 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X112 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X114 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X116 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X118 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X120 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X122 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X124 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X126 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X128 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X130 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X132 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X134 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X136 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X138 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X140 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X142 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X144 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X146 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X148 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;===== remove waste by touching end =====\n\nG1 Z10 F1200\nG0 X118 Y261 F30000\nG1 Z5 F1200\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-50}\n\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S140 ; prepare to abl\nG0 Z5 F20000\n\nG0 X128 Y261 F20000 ; move to exposed steel surface\nG0 Z-1.01 F1200 ; stop the nozzle\n\nG91\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z10 F1200\n\n;===== brush material wipe nozzle =====\n\nG90\nG1 Y250 F30000\nG1 X55\nG1 Z1.300 F1200\nG1 Y262.5 F6000\nG91\nG1 X-35 F30000\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Z5.000 F1200\n\nG90\nG1 X30 Y250.000 F30000\nG1 Z1.300 F1200\nG1 Y262.5 F6000\nG91\nG1 X35 F30000\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Y-0.5\nG1 X45\nG1 Y-0.5\nG1 X-45\nG1 Z10.000 F1200\n\n;===== brush material wipe nozzle end =====\n\nG90\n;G0 X128 Y261 F20000 ; move to exposed steel surface\nG1 Y250 F30000\nG1 X138\nG1 Y261\nG0 Z-1.01 F1200 ; stop the nozzle\n\nG91\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nM109 S140\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM211 R; pop softend status\n\n;===== wipe nozzle end ================================\n\n;M400\n;M73 P1.717\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\n\nG90\nG1 Z5 F1200\nG1 X0 Y0 F30000\nG29.2 S1 ; turn on ABL\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140\nM106 S0 ; turn off fan , too noisy\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n\n;===== home after wipe mouth end =======================\n\n;M400\n;M73 P1.717\n\nG1 X108.000 Y-0.500 F30000\nG1 Z0.300 F1200\nM400\nG2814 Z0.32\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; prepare to print\n\n;===== nozzle load line ===============================\n;G90\n;M83\n;G1 Z5 F1200\n;G1 X88 Y-0.5 F20000\n;G1 Z0.3 F1200\n\n;M109 S{nozzle_temperature_initial_layer[initial_extruder]}\n\n;G1 E2 F300\n;G1 X168 E4.989 F6000\n;G1 Z1 F1200\n;===== nozzle load line end ===========================\n\n;===== extrude cali test ===============================\n\nM400\n M900 S\n M900 C\n G90\n M83\n\n M109 S{nozzle_temperature_initial_layer[initial_extruder]}\n G0 X128 E8 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G91\n G1 X1 Z-0.300\n G1 X4\n G1 Z1 F1200\n G90\n M400\n\nM900 R\n\nM1002 judge_flag extrude_cali_flag\nM622 J1\n G90\n G1 X108.000 Y1.000 F30000\n G91\n G1 Z-0.700 F1200\n G90\n M83\n G0 X128 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X133 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X138 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X143 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X148 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X153 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G91\n G1 X1 Z-0.300\n G1 X4\n G1 Z1 F1200\n G90\n M400\nM623\n\nG1 Z0.2\n\n;M400\n;M73 P1.717\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\n;G392 S1 ; turn on clog detection\nM1007 S1 ; turn on mass estimation\nG29.4\n", - "machine_end_gcode": ";===== date: 20231229 =====================\nG392 S0 ;turn off nozzle clog detect\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X267 F15000\nT255\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nG1 X-28.5 F18000\nG1 X-48.2 F3000\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 256}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z256 F600\n G1 Z256\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-48 Y180 F3600\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N80\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N80\nM1006 A44 B20 L100 C49 D20 M80 E41 F20 N80\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N80\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n;=====printer finish sound=========\n\n;M17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM400\nM18 X Y Z\n\n", - "time_lapse_gcode": ";===================== date: 20250206 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-48.2 F3000 ; move to safe pos\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n; SKIPTYPE: head_wrap_detect\nM622.1 S1\nM1002 judge_flag g39_3rd_layer_detect_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X261 Y250 F20000\n M400 P200\n G39 S1\n G0 Z2 F4000\n {endif}\n\n\n M622.1 S1\n M1002 judge_flag g39_detection_flag\n M622 J1\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\n M623\nM623\n; SKIPPABLE_END\n{endif}\n", - "change_filament_gcode": ";===== A1 20250822 =======================\nM1007 S0 ; turn off mass estimation\nG392 S0\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if nozzle_temperature[previous_extruder] > 142 && next_extruder < 255}\nM104 S{nozzle_temperature[previous_extruder]}\n{endif}\n\nG1 X267 F18000\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F1200\n{else}\nM620.11 S0\n{endif}\nM400\n\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nM620.10 A0 F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60} L[flush_length] H[nozzle_diameter] T{flush_temperatures[next_extruder]}\n\nG1 Y128 F9000\n\n{if next_extruder < 255}\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\n\nM400\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[flush_temperatures[next_extruder]]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S{nozzle_temperature[next_extruder]}\nG1 E6 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nG1 X-38.2 F18000\nG1 X-48.2 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM622.1 S0\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n G92 E0\n G1 E-[new_retract_length_toolchange] F1800\n M400\n \n M106 P1 S178\n M400 S4\n G1 X-38.2 F18000\n G1 X-48.2 F3000\n G1 X-38.2 F18000 ;wipe and shake\n G1 X-48.2 F3000\n G1 X-38.2 F12000 ;wipe and shake\n G1 X-48.2 F3000\n M400\n M106 P1 S0 \nM623\n\nM621 S[next_extruder]A\nG392 S0\n\nM1007 S1\n" + "type": "machine", + "name": "Bambu Lab A1 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM030", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab A1", + "printer_variant": "0.4", + "auxiliary_fan": "0", + "bed_exclude_area": [], + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1" + ], + "default_print_profile": "0.20mm Standard @BBL A1", + "enable_long_retraction_when_cut": "2", + "extruder_clearance_dist_to_rod": "56.5", + "extruder_clearance_height_to_lid": "256", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_max_radius": "73", + "grab_length": [ + "17.4" + ], + "head_wrap_detect_zone": [ + "226x224", + "256x224", + "256x256", + "226x256" + ], + "include": [ + "Bambu Lab A1 0.4 nozzle template machine_start_gcode", + "Bambu Lab A1 0.4 nozzle template machine_end_gcode", + "Bambu Lab A1 0.4 nozzle template time_lapse_gcode", + "Bambu Lab A1 0.4 nozzle template change_filament_gcode", + "Bambu Lab A1 0.4 nozzle template layer_change_gcode" + ], + "machine_load_filament_time": "25", + "machine_max_acceleration_extruding": [ + "12000", + "12000" + ], + "machine_max_acceleration_x": [ + "12000", + "12000" + ], + "machine_max_acceleration_y": [ + "12000", + "12000" + ], + "machine_max_acceleration_z": [ + "1500", + "1500" + ], + "machine_max_jerk_e": [ + "3", + "3" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "nozzle_height": "4.76", + "nozzle_volume": [ + "92" + ], + "printable_height": "256", + "printer_structure": "i3", + "retract_lift_below": [ + "255" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json index e09f5e1353..dc2de73fab 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.6 nozzle.json @@ -1,29 +1,32 @@ { - "type": "machine", - "name": "Bambu Lab A1 0.6 nozzle", - "inherits": "Bambu Lab A1 0.4 nozzle", - "from": "system", - "setting_id": "GM031", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab A1", - "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1" - ], - "default_print_profile": "0.30mm Strength @BBL A1 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A1 0.6 nozzle", + "inherits": "Bambu Lab A1 0.4 nozzle", + "from": "system", + "setting_id": "GM031", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab A1", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1" + ], + "default_print_profile": "0.30mm Strength @BBL A1 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json index 6b75929717..2d6b04082c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 0.8 nozzle.json @@ -1,29 +1,32 @@ { - "type": "machine", - "name": "Bambu Lab A1 0.8 nozzle", - "inherits": "Bambu Lab A1 0.4 nozzle", - "from": "system", - "setting_id": "GM032", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab A1", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1" - ], - "default_print_profile": "0.40mm Standard @BBL A1 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A1 0.8 nozzle", + "inherits": "Bambu Lab A1 0.4 nozzle", + "from": "system", + "setting_id": "GM032", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab A1", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1" + ], + "default_print_profile": "0.40mm Standard @BBL A1 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json index d43fbf3d67..bb3a2ba202 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.2 nozzle.json @@ -1,38 +1,41 @@ { - "type": "machine", - "name": "Bambu Lab A1 mini 0.2 nozzle", - "inherits": "Bambu Lab A1 mini 0.4 nozzle", - "from": "system", - "setting_id": "GM021", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab A1 mini", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1M 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL A1M 0.2 nozzle", - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "retraction_length": [ - "0.4" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A1 mini 0.2 nozzle", + "inherits": "Bambu Lab A1 mini 0.4 nozzle", + "from": "system", + "setting_id": "GM021", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL A1M 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..dc1daa8e4e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";===== A1mini 20251031 =====\nG392 S0\nM1007 S0\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n\nG1 X180 F18000\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F1200\n{else}\nM620.11 S0\n{endif}\nM400\n\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nM620.10 A0 F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60} L[flush_length] H[nozzle_diameter] T{flush_temperatures[next_extruder]}\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\n\nM400\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[flush_temperatures[next_extruder]]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S[new_filament_temp]\nG1 E5 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM622.1 S0\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n G92 E0\n G1 E-[new_retract_length_toolchange] F1800\n M400\n \n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0 \nM623\n\nM621 S[next_extruder]A\nG392 S0\n\nM1007 S1\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..5741b3c5d4 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..9b58e6aa50 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== date: 20260513 =====================\n;turn off nozzle clog detect\nG392 S0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nG91\nG1 Z-1 F600\nG90\nM83\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18 X Y Z\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..943565b7cb --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20260513 ==================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\nM9833.2\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S3 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S0 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n{if (filament_type[initial_no_support_extruder] == \"PLA\") && (nozzle_diameter != 0.2)}\n M104 S220\n{else}\n M104 S250\n{endif}\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n{if (filament_type[initial_no_support_extruder] == \"PLA\") && (nozzle_diameter != 0.2)}\n M620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T220\n M109 S220 ;set nozzle to common flush temp\n{else}\n M620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n{endif}\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n{if (filament_type[initial_no_support_extruder] == \"PLA\") && (nozzle_diameter != 0.2)}\n M104 S220\n{else}\n M104 S{flush_temperatures[initial_no_support_extruder]}\n{endif}\n G92 E0\n G1 E50 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n M400\nM623\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5 F3000\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5\nG0 X55 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\nG1 X95\nG1 X90\n\nM211 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action:54\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28 T145\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nG1 E1.2 F500\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S0 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X68 Y-4 F30000\n G0 Z0.3 F18000 ;Move to start position\n M400\n G0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 Y0 Z0 F20000\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-13.5 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4} H[nozzle_diameter]\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\nG90\nM83\nG0 X68 Y-2.5 F30000\nG0 Z0.3 F18000 ;Move to start position\nG0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 Z0 F20000\nG0 Z5\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nM1007 S1\n\n\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..03bd284f25 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";===================== date: 20250206 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n; SKIPTYPE: head_wrap_detect\nM622.1 S1\nM1002 judge_flag g39_3rd_layer_detect_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X187 Y178 F20000\n G39 S1 X187 Y178\n G0 Z2 F4000\n {endif}\n\n\n M622.1 S1\n M1002 judge_flag g39_detection_flag\n M622 J1\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\n M623\nM623\n; SKIPPABLE_END\n{endif}\n\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json index 0cc3b0b8fb..c4907fd48e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.4 nozzle.json @@ -1,87 +1,89 @@ { - "type": "machine", - "name": "Bambu Lab A1 mini 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM020", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab A1 mini", - "printer_variant": "0.4", - "auxiliary_fan": "0", - "bed_exclude_area": [], - "best_object_pos": "0.7x0.5", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1M" - ], - "default_print_profile": "0.20mm Standard @BBL A1M", - "enable_long_retraction_when_cut": "2", - "extruder_clearance_dist_to_rod": "56.5", - "extruder_clearance_height_to_lid": "180", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_max_radius": "73", - "grab_length": [ - "17.4" - ], - "head_wrap_detect_zone": [ - "156x152", - "180x152", - "180x180", - "156x180" - ], - "machine_load_filament_time": "28", - "machine_max_acceleration_z": [ - "1500", - "1500" - ], - "machine_max_jerk_e": [ - "3", - "3" - ], - "machine_max_jerk_z": [ - "5", - "5" - ], - "machine_max_speed_z": [ - "30", - "30" - ], - "machine_unload_filament_time": "34", - "nozzle_height": "4.76", - "nozzle_type": [ - "stainless_steel" - ], - "nozzle_volume": [ - "92" - ], - "printable_area": [ - "0x0", - "180x0", - "180x180", - "0x180" - ], - "printable_height": "180", - "printer_structure": "i3", - "retract_lift_below": [ - "179" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: A1 mini =========================\n;===== date: 20250822 ==================\n\n;===== start to heat heatbead&hotend==========\nM1002 gcode_claim_action : 2\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM104 S170\nM140 S[bed_temperature_initial_layer_single]\nG392 S0 ;turn off clog detect\nM9833.2\n;=====start printer sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B0 L100 C37 D10 M100 E37 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E43 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C41 D10 M100 E41 F10 N100\nM1006 A0 B0 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C49 D10 M100 E49 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C39 D10 M100 E48 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B0 L100 C39 D10 M100 E44 F10 N100\nM1006 A0 B0 L100 C0 D10 M100 E0 F10 N100\nM1006 A43 B10 L100 C39 D10 M100 E46 F10 N100\nM1006 W\nM18\n;=====avoid end stop =================\nG91\nG380 S2 Z30 F1200\nG380 S3 Z-20 F1200\nG1 Z5 F1200\nG90\n\n;===== reset machine status =================\nM204 S6000\n\nM630 S0 P0\nG91\nM17 Z0.3 ; lower the z-motor current\n\nG90\nM17 X0.7 Y0.9 Z0.5 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM83\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== prepare print temperature and material ==========\nM400\nM18\nM109 S100 H170\nM104 S170\nM400\nM17\nM400\nG28 X\n\nM211 X0 Y0 Z0 ;turn off soft endstop ; turn off soft endstop to prevent protential logic problem\n\nM975 S1 ; turn on\n\nG1 X0.0 F30000\nG1 X-13.5 F3000\n\nM620 M ;enable remap\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n G392 S0 ;turn on clog detect\n M1002 gcode_claim_action : 4\n M400\n M1002 set_filament_type:UNKNOWN\n M109 S[nozzle_temperature_initial_layer]\n M104 S250\n M400\n T[initial_no_support_extruder]\n G1 X-13.5 F3000\n M400\n M620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n M109 S250 ;set nozzle to common flush temp\n M106 P1 S0\n G92 E0\n G1 E50 F200\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S{flush_temperatures[initial_no_support_extruder]}\n G92 E0\n G1 E50 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n M400\n M106 P1 S178\n G92 E0\n G1 E5 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G92 E0\n G1 E-0.5 F300\n\n G1 X0 F30000\n G1 X-13.5 F3000\n G1 X0 F30000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X0 F30000\n G1 X-13.5 F3000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-40}\n G392 S0 ;turn off clog detect\nM621 S[initial_no_support_extruder]A\n\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== mech mode fast check============================\nM1002 gcode_claim_action : 3\nG0 X25 Y175 F20000 ; find a soft place to home\n;M104 S0\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nM104 S170\n\n; build plate detect\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G39.4\n M400\nM623\n\nG1 Z5 F3000\nG1 X90 Y-1 F30000\nM400 P200\nM970.3 Q1 A7 K0 O2\nM974 Q1 S2 P0\n\nG1 X90 Y0 Z5 F30000\nM400 P200\nM970 Q0 A10 B50 C90 H15 K0 M20 O3\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X-1 Y10\nG28 X ; re-home XY\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\n\nM104 S170 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\nM211 S; push soft endstop status\nM211 X0 Y0 Z0 ;turn off Z axis endstop\n\nM83\nG1 E-1 F500\nG90\nM83\n\nM109 S170\nM104 S140\nG0 X90 Y-4 F30000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X91 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X92 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X93 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X94 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X95 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X96 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X97 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X98 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\nG1 Z2 F1200\nG1 X99 F10000\nG380 S3 Z-5 F1200\n\nG1 Z5 F30000\n;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5 F3000\nG0 X50 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG0 X85 Y185 F10000 ;move to exposed steel surface and stop the nozzle\nG0 Z-1.01 F10000\nG91\n\nG2 I1 J0 X2 Y0 F2000.1\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\nG2 I1 J0 X2\nG2 I-0.75 J0 X-1.5\n\nG90\nG1 Z5 F30000\nG1 X25 Y175 F30000.1 ;Brush material\nG1 Z0.2 F30000.1\nG1 Y185\nG91\nG1 X-30 F30000\nG1 Y-2\nG1 X27\nG1 Y1.5\nG1 X-28\nG1 Y-2\nG1 X30\nG1 Y1.5\nG1 X-30\nG90\nM83\n\nG1 Z5\nG0 X55 Y175 F20000 ; find a soft place to home\nG28 Z P0 T300; home z with low precision, permit 300deg temperature\nG29.2 S0 ; turn off ABL\n\nG1 Z10\nG1 X85 Y185\nG1 Z-1.01\nG1 X95\nG1 X90\n\nM211 R; pop softend status\n\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== wait heatbed ====================\nM1002 gcode_claim_action : 2\nM104 S0\nM190 S[bed_temperature_initial_layer_single];set bed temp\nM109 S140\n\nG1 Z5 F3000\nG29.2 S1\nG1 X10 Y10 F20000\n\n;===== bed leveling ==================================\n;M1002 set_flag g29_before_print_flag=1\nM1002 judge_flag g29_before_print_flag\nM622 J1\n M1002 gcode_claim_action : 1\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28 T145\n\nM623\n\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\n\nG1 X-13.5 Y0 Z10 F10000\nG1 E1.2 F500\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S{nozzle_temperature[initial_extruder]}\nM400\n\nM412 S1 ; ===turn on filament runout detection===\nM400 P10\n\nG392 S0 ;turn on clog detect\n\nM620.3 W1; === turn on filament tangle detection===\nM400 S2\n\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n;M1002 set_flag extrude_cali_flag=1\nM1002 judge_flag extrude_cali_flag\nM622 J1\n M1002 gcode_claim_action : 8\n \n M400\n M900 K0.0 L1000.0 M1.0\n G90\n M83\n G0 X68 Y-4 F30000\n G0 Z0.3 F18000 ;Move to start position\n M400\n G0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\n G0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n G0 Y0 Z0 F20000\n M400\n \n G1 X-13.5 Y0 Z10 F10000\n M400\n \n G1 E10 F{outer_wall_volumetric_speed/2.4*60}\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\n M1002 judge_last_extrude_cali_success\n M622 J0\n M983 F{outer_wall_volumetric_speed/2.4} A0.3 H[nozzle_diameter]; cali dynamic extrusion compensation\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0\n M623\n \n G1 X-13.5 F3000\n M400\n M984 A0.1 E1 S1 F{outer_wall_volumetric_speed/2.4} H[nozzle_diameter]\n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n M400\n M106 P1 S0\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n;===== extrude cali test ===============================\nM104 S{nozzle_temperature_initial_layer[initial_extruder]}\nG90\nM83\nG0 X68 Y-2.5 F30000\nG0 Z0.3 F18000 ;Move to start position\nG0 X88 E10 F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X93 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X98 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X103 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X108 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 X113 E.3742 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X115 Z0 F20000\nG0 Z5\nM400\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\n\nM400 ; wait all motion done before implement the emprical L parameters\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.02} ; for Textured PEI Plate\n{endif}\n\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nM1007 S1\n\n\n\n", - "machine_end_gcode": ";===== date: 20231229 =====================\n;turn off nozzle clog detect\nG392 S0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\n{if !spiral_mode && print_sequence != \"by object\"}\nM1002 judge_flag timelapse_record_flag\nM622 J1\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM400 P100\nM971 S11 C11 O0\nM991 S0 P-1 ;end timelapse at safe pos\nM623\n{endif}\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n;G1 X27 F15000 ; wipe\n\n; pull back filament to AMS\nM620 S255\nG1 X181 F12000\nT255\nG1 X0 F18000\nG1 X-13.0 F3000\nG1 X0 F18000 ; wipe\nM621 S255\n\nM104 S0 ; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 180}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z180 F600\n G1 Z180\n{endif}\nM400 P100\nM17 R ; restore z current\n\nG90\nG1 X-13 Y180 F3600\n\nG91\nG1 Z-1 F600\nG90\nM83\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M100 E42 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C46 D10 M100 E46 F10 N100\nM1006 A44 B20 L100 C39 D20 M100 E48 F20 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C44 D10 M100 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A0 B10 L100 C39 D10 M100 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E48 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A44 B20 L100 C41 D20 M100 E49 F20 N100\nM1006 A0 B20 L100 C0 D20 M100 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M100 E37 F20 N100\nM1006 W\n;=====printer finish sound=========\nM400 S1\nM18 X Y Z\n", - "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", - "time_lapse_gcode": ";===================== date: 20250206 =====================\n{if !spiral_mode && print_sequence != \"by object\"}\n; don't support timelapse gcode in spiral_mode and by object sequence for I3 structure printer\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\nG92 E0\nG1 Z{max_layer_z + 0.4}\nG1 X0 Y{first_layer_center_no_wipe_tower[1]} F18000 ; move to safe pos\nG1 X-13.0 F3000 ; move to safe pos\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X0 F18000\nM623\n\n; SKIPTYPE: head_wrap_detect\nM622.1 S1\nM1002 judge_flag g39_3rd_layer_detect_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 2}\n M400\n G90\n M83\n M204 S5000\n G0 Z2 F4000\n G0 X187 Y178 F20000\n G39 S1 X187 Y178\n G0 Z2 F4000\n {endif}\n\n\n M622.1 S1\n M1002 judge_flag g39_detection_flag\n M622 J1\n {if !in_head_wrap_detect_zone}\n M622.1 S0\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n G392 S0\n M400\n G90\n M83\n M204 S5000\n G0 Z{max_layer_z + 0.4} F4000\n G39.3 S1\n G0 Z{max_layer_z + 0.4} F4000\n G392 S0\n {endif}\n M623\n {endif}\n M623\nM623\n; SKIPPABLE_END\n{endif}\n\n\n", - "change_filament_gcode": ";===== A1mini 20250822 =====\nG392 S0\nM1007 S0\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n{if nozzle_temperature[previous_extruder] > 142 && next_extruder < 255}\nM104 S{nozzle_temperature[previous_extruder]}\n{endif}\n\nG1 X180 F18000\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F1200\n{else}\nM620.11 S0\n{endif}\nM400\n\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nM620.10 A0 F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60} L[flush_length] H[nozzle_diameter] T{flush_temperatures[next_extruder]}\n\nG1 Y90 F9000\n\n{if next_extruder < 255}\n\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\n\nM400\nG92 E0\nM628 S0\n\n{if flush_length_1 > 1}\n; FLUSH_START\n; always use highest temperature to flush\nM400\nM1002 set_filament_type:UNKNOWN\nM109 S[flush_temperatures[next_extruder]]\nM106 P1 S60\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\nM400\nM1002 set_filament_type:{filament_type[next_extruder]}\n{endif}\n\n{if flush_length_1 > 45 && flush_length_2 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_2 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 45 && flush_length_3 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_3 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 45 && flush_length_4 > 1}\n; WIPE\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nM106 P1 S0\n{endif}\n\n{if flush_length_4 > 1}\nM106 P1 S60\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n\nM629\n\nM400\nM106 P1 S60\nM109 S{nozzle_temperature[next_extruder]}\nG1 E5 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM400\nM106 P1 S178\nM400 S3\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nG1 X-3.5 F18000\nG1 X-13.5 F3000\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM106 P1 S0\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM622.1 S0\nM9833 F{outer_wall_volumetric_speed/2.4} A0.3 ; cali dynamic extrusion compensation\nM1002 judge_flag filament_need_cali_flag\nM622 J1\n G92 E0\n G1 E-[new_retract_length_toolchange] F1800\n M400\n \n M106 P1 S178\n M400 S7\n G1 X0 F18000\n G1 X-13.5 F3000\n G1 X0 F18000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n G1 X-13.5 F3000\n G1 X0 F12000 ;wipe and shake\n M400\n M106 P1 S0 \nM623\n\nM621 S[next_extruder]A\nG392 S0\n\nM1007 S1\n" + "type": "machine", + "name": "Bambu Lab A1 mini 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM020", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.4", + "auxiliary_fan": "0", + "bed_exclude_area": [], + "best_object_pos": "0.7x0.5", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M" + ], + "default_print_profile": "0.20mm Standard @BBL A1M", + "enable_long_retraction_when_cut": "2", + "extruder_clearance_dist_to_rod": "56.5", + "extruder_clearance_height_to_lid": "180", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_max_radius": "73", + "grab_length": [ + "17.4" + ], + "head_wrap_detect_zone": [ + "156x152", + "180x152", + "180x180", + "156x180" + ], + "include": [ + "Bambu Lab A1 mini 0.4 nozzle template machine_start_gcode", + "Bambu Lab A1 mini 0.4 nozzle template machine_end_gcode", + "Bambu Lab A1 mini 0.4 nozzle template layer_change_gcode", + "Bambu Lab A1 mini 0.4 nozzle template time_lapse_gcode", + "Bambu Lab A1 mini 0.4 nozzle template change_filament_gcode" + ], + "machine_load_filament_time": "28", + "machine_max_acceleration_z": [ + "1500", + "1500" + ], + "machine_max_jerk_e": [ + "3", + "3" + ], + "machine_max_jerk_z": [ + "5", + "5" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_unload_filament_time": "34", + "nozzle_height": "4.76", + "nozzle_volume": [ + "92" + ], + "printable_area": [ + "0x0", + "180x0", + "180x180", + "0x180" + ], + "printable_height": "180", + "printer_structure": "i3", + "retract_lift_below": [ + "179" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json index 53439cbb62..0bc539c678 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.6 nozzle.json @@ -1,44 +1,44 @@ { - "type": "machine", - "name": "Bambu Lab A1 mini 0.6 nozzle", - "inherits": "Bambu Lab A1 mini 0.4 nozzle", - "from": "system", - "setting_id": "GM022", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab A1 mini", - "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1M" - ], - "default_print_profile": "0.30mm Standard @BBL A1M 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "nozzle_type": [ - "hardened_steel" - ], - "retraction_length": [ - "1.4" - ], - "retraction_minimum_travel": [ - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A1 mini 0.6 nozzle", + "inherits": "Bambu Lab A1 mini 0.4 nozzle", + "from": "system", + "setting_id": "GM022", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M" + ], + "default_print_profile": "0.30mm Standard @BBL A1M 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4" + ], + "retraction_minimum_travel": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json index c347db6859..b0ae2d100d 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini 0.8 nozzle.json @@ -1,44 +1,44 @@ { - "type": "machine", - "name": "Bambu Lab A1 mini 0.8 nozzle", - "inherits": "Bambu Lab A1 mini 0.4 nozzle", - "from": "system", - "setting_id": "GM023", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab A1 mini", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A1M" - ], - "default_print_profile": "0.40mm Standard @BBL A1M 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "nozzle_type": [ - "hardened_steel" - ], - "retract_length_toolchange": [ - "3" - ], - "retraction_length": [ - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A1 mini 0.8 nozzle", + "inherits": "Bambu Lab A1 mini 0.4 nozzle", + "from": "system", + "setting_id": "GM023", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab A1 mini", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A1M" + ], + "default_print_profile": "0.40mm Standard @BBL A1M 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3" + ], + "retraction_length": [ + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json index 33cf76e05b..064b0b21e7 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1 mini.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1 mini.json @@ -1,15 +1,16 @@ { - "type": "machine_model", - "name": "Bambu Lab A1 mini", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-A1M.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "image_bed_type": "mini", - "not_support_bed_type": "Smooth Cool Plate;Engineering Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "N1", - "default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M;Bambu PETG HF @BBL A1M;Bambu PLA Basic @BBL A1M 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab A1 mini", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-A1M.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "image_bed_type": "mini", + "not_support_bed_type": "Cool Plate;Engineering Plate", + "support_side_panel_fan": "false", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "N1", + "default_materials": "Bambu PLA Matte @BBL A1M;Bambu PLA Basic @BBL A1M;Bambu PLA Silk @BBL A1M;Bambu Support For PLA @BBL A1M;Bambu TPU 95A @BBL A1M;Generic PLA @BBL A1M;Generic PLA High Speed @BBL A1M;Bambu PLA Metal @BBL A1M;Generic PETG @BBL A1M;Bambu PLA Marble @BBL A1M;Bambu PLA-CF @BBL A1M;Bambu PETG-CF @BBL A1M;Bambu PETG HF @BBL A1M;Bambu PLA Pure @BBL A1M;Bambu PLA Basic @BBL A1M 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A1.json b/resources/profiles/BBL/machine/Bambu Lab A1.json index 1ce5f24296..d3b7597def 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A1.json +++ b/resources/profiles/BBL/machine/Bambu Lab A1.json @@ -1,13 +1,14 @@ { - "type": "machine_model", - "name": "Bambu Lab A1", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "N2S", - "default_materials": "Bambu PLA Matte @BBL A1;Bambu PLA Basic @BBL A1;Bambu PLA Silk @BBL A1;Bambu Support For PA/PET @BBL A1;Bambu ABS @BBL A1;Bambu TPU 95A @BBL A1;Bambu PLA Tough @BBL A1;Generic PLA @BBL A1;Generic PLA High Speed @BBL A1;Generic PETG @BBL A1;Generic PVA @BBL A1;Bambu PETG HF @BBL A1;Bambu PLA Basic @BBL A1 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab A1", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "support_side_panel_fan": "false", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "N2S", + "default_materials": "Bambu PLA Matte @BBL A1;Bambu PLA Basic @BBL A1;Bambu PLA Silk @BBL A1;Bambu Support For PA/PET @BBL A1;Bambu ABS @BBL A1;Bambu TPU 95A @BBL A1;Bambu PLA Tough @BBL A1;Generic PLA @BBL A1;Generic PLA High Speed @BBL A1;Generic PETG @BBL A1;Generic PVA @BBL A1;Bambu PETG HF @BBL A1;Bambu PLA Pure @BBL A1;Bambu PLA Basic @BBL A1 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.2 nozzle.json index afdfa19fdd..e8991904a8 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.2 nozzle.json @@ -1,37 +1,37 @@ { - "type": "machine", - "name": "Bambu Lab A2L 0.2 nozzle", - "inherits": "Bambu Lab A2L 0.4 nozzle", - "from": "system", - "setting_id": "GM055", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab A2L", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A2L 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL A2L 0.2 nozzle", - "machine_max_speed_x": [ - "500", - "200" - ], - "machine_max_speed_y": [ - "500", - "200" - ], - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "retract_lift_below": [ - "326" - ], - "upward_compatible_machine": [ - "Bambu Lab H2S 0.2 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A2L 0.2 nozzle", + "inherits": "Bambu Lab A2L 0.4 nozzle", + "from": "system", + "setting_id": "GM055", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab A2L", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A2L 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL A2L 0.2 nozzle", + "machine_max_speed_x": [ + "500", + "200" + ], + "machine_max_speed_y": [ + "500", + "200" + ], + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retract_lift_below": [ + "326" + ], + "upward_compatible_machine": [ + "Bambu Lab H2S 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..57c4eb3421 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A2L 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";======== A2L filament_change gcode ==========\n;===== 2026/05/26 =====\n\nM620 S[next_filament_id]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_filament_id] == 0 || z_hop_types[current_filament_id] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\") || (filament_type[current_filament_id] == \"PETG-CF\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\") || (filament_type[next_filament_id] == \"PETG-CF\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_filament_id] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_filament_id] E0\n{endif}\n\nM620.11 K0 I[current_filament_id] R0\n\n\nT[next_filament_id]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 80) * 7.5 + 6.5}\n\n; compensate for heating and cooling\n{if flush_length > 0}\n{if flush_temperatures[next_filament_id] > new_filament_temp}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{else}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{endif}\n{endif}\n\n; VFLUSH_END\n\n\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\n\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM621 S[next_filament_id]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;disable E air printing detect\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PETG\") || (filament_type[next_filament_id] == \"PETG-CF\") || (filament_type[next_filament_id] == \"TPU\") || (filament_type[next_filament_id] == \"TPU-AMS\"))}\n G390.7 M6 G4 C3\n{else}\n G390.7 M6 G6 C3\n{endif}\n\nM620.6 I[next_filament_id] W1 ;enable ams air printing detect\n\n;Set the filament gear warning temperature\n{if (temperature_vitrification[next_filament_id] <= 50)}\n {if ((filament_ids[next_filament_id]==\"GFA05\") || (filament_ids[next_filament_id]==\"GFA06\"))}\n M142 P1 O45; set PLASILK gear warning temperature when filament change\n {else}\n M142 P1 O60; set PLA/PLACF/PLAAERO/PVA/TPU gear warning temperature when filament change\n {endif}\n{else}\n M142 P1 O100 ; set gear warning temperature when filament change\n{endif}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..d53ce80cbb --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A2L 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": ";======== A2L layer_change gcode ==========\n;===== 2026/04/29 ====\n; update layer progress\nM201 N1 Y[curr_y_acceleration_limit]\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\nM1007 L1" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..f1f28d1280 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A2L 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";======== A2L end gcode ==========\n;===== 2026/07/29 =====\n\nM1003 S0\nM73 P100 R0\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\nG150.3\nG1 Y295 F3600\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM142 P1 Q0 ; turn off extruder autocool\n\nM220 S100 ; Reset feedrate magnitude\nM204.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\n\nM1015.3 S0 ;disable clog detect\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L30 C53 D10 M30 E53 F10 N30 \nM1006 A57 B10 L30 C57 D10 M30 E57 F10 N30 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L30 C53 D10 M30 E53 F10 N30 \nM1006 A57 B10 L30 C57 D10 M30 E57 F10 N30 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L30 C48 D10 M30 E48 F10 N30 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L30 C60 D10 M30 E60 F10 N30 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM1007 S0" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..ca5c2c516c --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A2L 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n;M1002 set_flag bed_heat_stable_wait_flag=1\n\n;======== A2L start gcode==========\n;===== 2026/07/14 =====\nT1000 O0\nM1002 gcode_claim_action : 2\n{if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M140 S65\n{else}\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n{endif}\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\nM400\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L30 C53 D9 M30 E53 F9 N30\nM1006 A56 B9 L30 C56 D9 M30 E56 F9 N30\nM1006 A61 B9 L30 C61 D9 M30 E61 F9 N30\nM1006 A53 B9 L30 C53 D9 M30 E53 F9 N30\nM1006 A56 B9 L30 C56 D9 M30 E56 F9 N30\nM1006 A61 B18 L30 C61 D18 M30 E61 F18 N30\nM1006 W\n;=====printer start sound ===================\n\n M620 M ;enable remap\n G389\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n M220 S100 ;Reset Feedrate\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n M983.4 S0\n;===== reset machine status =================\n;Set the filament gear warning temperature\n{if (temperature_vitrification[initial_filament_id] <= 50)}\n {if ((filament_ids[initial_filament_id]==\"GFA05\") || (filament_ids[initial_filament_id]==\"GFA06\"))}\n M142 P1 O45; set PLASILK gear warning temperature when start\n {else}\n M142 P1 O60; set PLA/PLACF/PLAAERO/PVA/TPU gear warning temperature when start\n {endif}\n{else}\n M142 P1 O100 ; set gear warning temperature when start\n{endif}\n;===== start to heat heatbed & hotend==========\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M104 S140 A\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n M105\n G28 X Z P0 T300 W\n G150.3\n G1 Z1.3 F1200\n G150.1 F16000 ; wipe mouth to avoid filament stick to heatbed\n G90\n M400\n;===== first homing end =====\n\n\n;===== detection start =====\n;===== build_plate_detect_flag start =====\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G91\n G1 Z5 F1200\n G90\n G0 X15 F30000\n G0 Y319 F3000\n G91\n G1 Z-5 F1200\n G28 Z P0 T140\n G1 F1200\n G39.4\n G90\n G1 Z5 F1200\nM623\n;===== build_plate_detect_flag end =====\n;===== detection end =====\n\n\n;===== hotend hotbed pre-heat start =====\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A ; rise nozzle temp in advance\n\n G90\n G1 Y220 F3000 ; Put away the heated bed to prevent collisions\n\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M190 S65\n {else}\n M190 S[bed_temperature_initial_layer_single]\n {endif}\n;===== hotend hotbed pre-heat end =====\n\n\n;===== prepare print temperature and material ==========\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\n M620.11 P0 L0 I[initial_no_support_filament_id] E0\n M620.11 K0 I[initial_no_support_filament_id] R0\n\n M620 S[initial_no_support_filament_id]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_filament_id]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M621 S[initial_no_support_filament_id]A\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n{if ((filament_type[initial_no_support_filament_id] == \"PETG\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\") || (filament_type[initial_no_support_filament_id] == \"TPU\") || (filament_type[initial_no_support_filament_id] == \"TPU-AMS\"))}\n G390.7 M6 G4 C3\n{else}\n G390.7 M6 G6 C3\n{endif}\n;===== prepare print temperature and material ==========\n\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M623\n;===== auto extrude cali end =========================\n\n\n {if filament_type[initial_filament_id] == \"TPU\" || filament_type[initial_filament_id] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n G0 Z1.3 F1200\n G150.2\n G150.1 F16000\n\n G91\n G1 X20 F12000 ; move away from the trash bin\n G90\n M400\n\n\n;===== wipe nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M109 S140 A\n M106 P1 S255\n G91\n G1 Z1.3 F1200\n G90\n M400 S1\n ;======== enhance brush nozzle start =====\n G150.1 F16000\n G91\n G1 Y5 F5000\n G1 X-20 F16000\n G1 Y-10 F5000\n G1 X-20 F16000\n G1 Y10 F5000\n G1 X20 F16000\n G1 Y-10 F5000\n G1 X20 F16000\n G1 Y5 F5000\n G90\n G150.1 F16000\n G150.3\n ;======== enhance brush nozzle end =====\n M106 P1 S0\n;===== wipe nozzle end =====\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 Z5 F1200\n G1 X165 Y160 F20000\n M400 P200\n M970.3 Q1 A5 K0 O3\n M970.3 Q1 B1\n M970.2 Q1 K1 W52 Z0.1 B30 ;\n M970.3 Q0 A10 K0 O1\n M970.3 Q0 B1\n M970.2 Q0 K1 W40 Z0.1 B20 ;\n M974 Q0 S2 P0\n M974 Q1 S2 P0\n M975 S1 R1 M1\n M400\n G1 X155 F3000\n G150.3\n;===== mech mode sweep end =====\n\n\n;===== bed leveling ==================================\n\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M190 S65\n {else}\n M190 S[bed_temperature_initial_layer_single] ; ensure bed temp\n {endif}\n M109 S140 A\n\n\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M1002 gcode_claim_action : 58\n SYNC R0 T600\n M1030 S500 ; action before has done 200s insulation\n M1030 C\n {else}\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 judge_flag bed_heat_stable_wait_flag\n M622 J1\n {if (bed_temperature_initial_layer_single > 35)}\n M1002 gcode_claim_action : 58\n G29.30 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M623\n M623\n M622 J2\n M1002 judge_flag bed_heat_stable_wait_flag\n M622 J1\n {if (bed_temperature_initial_layer_single > 35)}\n M1002 gcode_claim_action : 58\n G29.30 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M623\n M623\n {endif}\n SYNC R0 T120 ; Adjust estimated time\n\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n G29 R\n {else}\n {if (bed_temperature_initial_layer_single > 35)}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O1 R\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O R\n {endif}\n {endif}\n M400\n M623\n\n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n G29 R\n {else}\n {if (bed_temperature_initial_layer_single > 35)}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O1 R\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O R\n {endif}\n {endif}\n M400\n M623\n\n M622 J0\n G28 R\n M623\n G29.2 S1\n;===== bed leveling end ================================\n\n M985.1 U0 E2\n M985.1 U1 E2\n\n M104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M190 S65\n {else}\n M190 S[bed_temperature_initial_layer_single] ; ensure bed temp\n {endif}\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n\n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n G29.1 Z{-0.03} ; for Textured PEI Plate first layer\n {else}\n G29.1 Z{-0.04} ; for Textured PEI Plate\n {endif}\n {else}\n G29.1 Z{-0.01}\n {endif}\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n G0 X145 Y0 F24000\n M400\n G130 O0 X145 Y-0.2 Z0.8 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E20 D4\n G90\n M83\n G1 Z0.2\n M400\n;===== nozzle load line end ===========================\nM1007 S1 C1;turn on mass estimation && clear\nM1002 gcode_claim_action : 0\n G29.99\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] W1 ;enable ams air printing detect\n\nM1010 Q0 B0.005 S0.01\nM1010 Q1 B0.002 S0.01\nM1010.1 S1\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..3add10135b --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab A2L 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";======== A2L timelapse gcode ==========\n;===== 2026/05/09 ====\n{if !spiral_mode && print_sequence != \"by object\"}\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G1 Z{max_layer_z + 0.4} F1200\n G150.3 ; move to garbage can\n G1 Y{first_layer_center_no_wipe_tower[1]} F30000; move to safe pos\n M400\n M1004 S5 P1 ; external shutter\n M971 S11 C11 O0\n M400 P350\nM623\n; SKIPPABLE_END\n{endif}\n; SKIPPABLE_START\n; SKIPTYPE: g39_detection\n; go x0 clamping detection, clear_to_x0 = [clear_to_x0]\n{if !spiral_mode && (print_sequence != \"by object\" || clear_to_x0)}\nM1002 judge_flag g39_detection_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 1 || layer_num == 2}\n M400\n G390.7 M7 S1 Z2.5\n {endif}\n {if layer_num > 5 && layer_z <= 10 && layer_z > 0.4 && layer_num % 6 == 0}\n M400\n G390.7 M7 S1 Z2.5\n {endif}\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n M400\n G390.7 M9 S1 Z2.5\n {endif}\n M623\nM623\n{endif}\n; SKIPPABLE_END" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle.json index 93bf4afd83..4b95e9b7de 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.4 nozzle.json @@ -1,100 +1,118 @@ { - "type": "machine", - "name": "Bambu Lab A2L 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM056", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab A2L", - "printer_variant": "0.4", - "auxiliary_fan": "0", - "bed_exclude_area": [], - "default_filament_profile": [ - "Bambu PLA Basic @BBL A2L 0.4 nozzle" - ], - "default_print_profile": "0.20mm Standard @BBL A2L", - "enable_long_retraction_when_cut": "2", - "extruder_clearance_height_to_lid": "325", - "extruder_clearance_height_to_rod": "25", - "extruder_clearance_max_radius": "73", - "grab_length": [ - "17.4" - ], - "head_wrap_detect_zone": [ - "226x224", - "256x224", - "256x256", - "226x256" - ], - "machine_bed_mass_Y": "2700", - "machine_load_filament_time": "11", - "machine_max_acceleration_extruding": [ - "12000", - "12000" - ], - "machine_max_acceleration_x": [ - "12000", - "12000" - ], - "machine_max_acceleration_y": [ - "8000", - "8000" - ], - "machine_max_acceleration_z": [ - "1500", - "1500" - ], - "machine_max_force_Y": "29", - "machine_max_jerk_e": [ - "3", - "3" - ], - "machine_max_printed_mass": "2000", - "machine_max_speed_x": [ - "500", - "500" - ], - "machine_max_speed_y": [ - "500", - "500" - ], - "machine_max_speed_z": [ - "30", - "30" - ], - "machine_unload_filament_time": "12", - "nozzle_height": "4.76", - "nozzle_type": [ - "stainless_steel" - ], - "nozzle_volume": [ - "92" - ], - "deretract_speed_extruder_change": [ - "30" - ], - "printable_area": [ - "0x0", - "330x0", - "330x320", - "0x320" - ], - "printable_height": "325", - "printer_structure": "i3", - "retract_lift_below": [ - "326" - ], - "support_fast_purge_mode": "1", - "support_object_skip_flush": "1", - "upward_compatible_machine": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n;M1002 set_flag bed_heat_stable_wait_flag=1\n\n;======== A2L start gcode==========\n;===== 2026/05/26 =====\nT1000 O0\nM1002 gcode_claim_action : 2\n{if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M140 S65\n{else}\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n{endif}\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\nM400\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L30 C53 D9 M30 E53 F9 N30\nM1006 A56 B9 L30 C56 D9 M30 E56 F9 N30\nM1006 A61 B9 L30 C61 D9 M30 E61 F9 N30\nM1006 A53 B9 L30 C53 D9 M30 E53 F9 N30\nM1006 A56 B9 L30 C56 D9 M30 E56 F9 N30\nM1006 A61 B18 L30 C61 D18 M30 E61 F18 N30\nM1006 W\n;=====printer start sound ===================\n\n M620 M ;enable remap\n G389\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n M220 S100 ;Reset Feedrate\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n M983.4 S0\n;===== reset machine status =================\n;Set the filament gear warning temperature\n{if (temperature_vitrification[initial_filament_id] <= 50)}\n {if ((filament_ids[initial_filament_id]==\"GFA05\") || (filament_ids[initial_filament_id]==\"GFA06\"))}\n M142 P1 O45; set PLASILK gear warning temperature when start\n {else}\n M142 P1 O60; set PLA/PLACF/PLAAERO/PVA/TPU gear warning temperature when start\n {endif}\n{else}\n M142 P1 O100 ; set gear warning temperature when start\n{endif}\n;===== start to heat heatbed & hotend==========\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M104 S140 A\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n M105\n G28 X Z P0 T300 W\n G150.3\n G1 Z1.3 F1200\n G150.1 F16000 ; wipe mouth to avoid filament stick to heatbed\n G90\n M400\n;===== first homing end =====\n\n\n;===== detection start =====\n;===== build_plate_detect_flag start =====\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n G91\n G1 Z5 F1200\n G90\n G0 X15 F30000\n G0 Y319 F3000\n G91\n G1 Z-5 F1200\n G28 Z P0 T140\n G1 F1200\n G39.4\n G90\n G1 Z5 F1200\nM623\n;===== build_plate_detect_flag end =====\n;===== detection end =====\n\n\n;===== hotend hotbed pre-heat start =====\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A ; rise nozzle temp in advance\n\n G90\n G1 Y220 F3000 ; Put away the heated bed to prevent collisions\n\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M190 S65\n {else}\n M190 S[bed_temperature_initial_layer_single]\n {endif}\n;===== hotend hotbed pre-heat end =====\n\n\n;===== prepare print temperature and material ==========\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\n M620.11 P0 L0 I[initial_no_support_filament_id] E0\n M620.11 K0 I[initial_no_support_filament_id] R0\n\n M620 S[initial_no_support_filament_id]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_filament_id]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M621 S[initial_no_support_filament_id]A\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n{if ((filament_type[initial_no_support_filament_id] == \"PETG\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\") || (filament_type[initial_no_support_filament_id] == \"TPU\") || (filament_type[initial_no_support_filament_id] == \"TPU-AMS\"))}\n G390.7 M6 G4 C3\n{else}\n G390.7 M6 G6 C3\n{endif}\n;===== prepare print temperature and material ==========\n\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M623\n;===== auto extrude cali end =========================\n\n\n {if filament_type[initial_filament_id] == \"TPU\" || filament_type[initial_filament_id] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n G0 Z1.3 F1200\n G150.2\n G150.1 F16000\n\n G91\n G1 X20 F12000 ; move away from the trash bin\n G90\n M400\n\n\n;===== wipe nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M109 S140 A\n M106 P1 S255\n G91\n G1 Z1.3 F1200\n G90\n M400 S1\n ;======== enhance brush nozzle start =====\n G150.1 F16000\n G91\n G1 Y5 F5000\n G1 X-20 F16000\n G1 Y-10 F5000\n G1 X-20 F16000\n G1 Y10 F5000\n G1 X20 F16000\n G1 Y-10 F5000\n G1 X20 F16000\n G1 Y5 F5000\n G90\n G150.1 F16000\n G150.3\n ;======== enhance brush nozzle end =====\n M106 P1 S0\n;===== wipe nozzle end =====\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 Z5 F1200\n G1 X165 Y160 F20000\n M400 P200\n M970.3 Q1 A5 K0 O3\n M970.3 Q1 B1\n M970.2 Q1 K1 W52 Z0.1 B30 ;\n M970.3 Q0 A10 K0 O1\n M970.3 Q0 B1\n M970.2 Q0 K1 W40 Z0.1 B20 ;\n M974 Q0 S2 P0\n M974 Q1 S2 P0\n M975 S1 R1 M1\n M400\n G1 X155 F3000\n G150.3\n;===== mech mode sweep end =====\n\n\n;===== bed leveling ==================================\n\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M190 S65\n {else}\n M190 S[bed_temperature_initial_layer_single] ; ensure bed temp\n {endif}\n M109 S140 A\n\n\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M1002 gcode_claim_action : 58\n SYNC R0 T600\n M1030 S500 ; action before has done 200s insulation\n M1030 C\n {else}\n M1002 judge_flag bed_heat_stable_wait_flag\n M622 J1\n {if (bed_temperature_initial_layer_single > 35)}\n M1002 gcode_claim_action : 54\n G29.30 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M623\n {endif}\n SYNC R0 T120 ; Adjust estimated time\n\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n G29 R\n {else}\n {if (bed_temperature_initial_layer_single > 35)}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O1 R\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O R\n {endif}\n {endif}\n M400\n M623\n\n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n G29 R\n {else}\n {if (bed_temperature_initial_layer_single > 35)}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O1 R\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} O R\n {endif}\n {endif}\n M400\n M623\n\n M622 J0\n G28 R\n M623\n G29.2 S1\n;===== bed leveling end ================================\n\n M985.1 U0 E2\n M985.1 U1 E2\n\n M104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n M190 S65\n {else}\n M190 S[bed_temperature_initial_layer_single] ; ensure bed temp\n {endif}\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n\n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n {if hold_chamber_temp_for_flat_print && (bed_temperature_initial_layer_single == 55)}\n G29.1 Z{-0.03} ; for Textured PEI Plate first layer\n {else}\n G29.1 Z{-0.04} ; for Textured PEI Plate\n {endif}\n {else}\n G29.1 Z{-0.01}\n {endif}\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n G0 X145 Y0 F24000\n M400\n G130 O0 X145 Y-0.2 Z0.8 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E20 D4\n G90\n M83\n G1 Z0.2\n M400\n;===== nozzle load line end ===========================\nM1007 S1 C1;turn on mass estimation && clear\nM1002 gcode_claim_action : 0\n G29.99\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] W1 ;enable ams air printing detect\n\nM1010 Q0 B0.005 S0.01\nM1010 Q1 B0.002 S0.01\nM1010.1 S1\n", - "machine_end_gcode": ";======== A2L end gcode ==========\n;===== 2026/04/07 =====\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\nG150.3\nG1 Y295 F3600\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM142 P1 Q0 ; turn off extruder autocool\n\nM220 S100 ; Reset feedrate magnitude\nM204.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\n\nM1015.3 S0 ;disable clog detect\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L30 C53 D10 M30 E53 F10 N30 \nM1006 A57 B10 L30 C57 D10 M30 E57 F10 N30 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L30 C53 D10 M30 E53 F10 N30 \nM1006 A57 B10 L30 C57 D10 M30 E57 F10 N30 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L30 C48 D10 M30 E48 F10 N30 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L30 C60 D10 M30 E60 F10 N30 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM1007 S0", - "layer_change_gcode": ";======== A2L layer_change gcode ==========\n;===== 2026/04/29 ====\n; update layer progress\nM201 N1 Y[curr_y_acceleration_limit]\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\nM1007 L1", - "time_lapse_gcode": ";======== A2L timelapse gcode ==========\n;===== 2026/05/09 ====\n{if !spiral_mode && print_sequence != \"by object\"}\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G1 Z{max_layer_z + 0.4} F1200\n G150.3 ; move to garbage can\n G1 Y{first_layer_center_no_wipe_tower[1]} F30000; move to safe pos\n M400\n M1004 S5 P1 ; external shutter\n M971 S11 C11 O0\n M400 P350\nM623\n; SKIPPABLE_END\n{endif}\n; SKIPPABLE_START\n; SKIPTYPE: g39_detection\n; go x0 clamping detection, clear_to_x0 = [clear_to_x0]\n{if !spiral_mode && (print_sequence != \"by object\" || clear_to_x0)}\nM1002 judge_flag g39_detection_flag\nM622 J1\n ; enable nozzle clog detect at 3rd layer\n {if layer_num == 1 || layer_num == 2}\n M400\n G390.7 M7 S1 Z2.5\n {endif}\n {if layer_num > 5 && layer_z <= 10 && layer_z > 0.4 && layer_num % 6 == 0}\n M400\n G390.7 M7 S1 Z2.5\n {endif}\n M1002 judge_flag g39_mass_exceed_flag\n M622 J1\n {if layer_num > 2}\n M400\n G390.7 M9 S1 Z2.5\n {endif}\n M623\nM623\n{endif}\n; SKIPPABLE_END", - "change_filament_gcode": ";======== A2L filament_change gcode ==========\n;===== 2026/05/26 =====\n\nM620 S[next_filament_id]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_filament_id] == 0 || z_hop_types[current_filament_id] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\") || (filament_type[current_filament_id] == \"PETG-CF\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\") || (filament_type[next_filament_id] == \"PETG-CF\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_filament_id] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_filament_id] E0\n{endif}\n\nM620.11 K0 I[current_filament_id] R0\n\n\nT[next_filament_id]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 80) * 7.5 + 6.5}\n\n; compensate for heating and cooling\n{if flush_length > 0}\n{if flush_temperatures[next_filament_id] > new_filament_temp}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{else}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{endif}\n{endif}\n\n; VFLUSH_END\n\n\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\n\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM621 S[next_filament_id]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;disable E air printing detect\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PETG\") || (filament_type[next_filament_id] == \"PETG-CF\") || (filament_type[next_filament_id] == \"TPU\") || (filament_type[next_filament_id] == \"TPU-AMS\"))}\n G390.7 M6 G4 C3\n{else}\n G390.7 M6 G6 C3\n{endif}\n\nM620.6 I[next_filament_id] W1 ;enable ams air printing detect\n\n;Set the filament gear warning temperature\n{if (temperature_vitrification[next_filament_id] <= 50)}\n {if ((filament_ids[next_filament_id]==\"GFA05\") || (filament_ids[next_filament_id]==\"GFA06\"))}\n M142 P1 O45; set PLASILK gear warning temperature when filament change\n {else}\n M142 P1 O60; set PLA/PLACF/PLAAERO/PVA/TPU gear warning temperature when filament change\n {endif}\n{else}\n M142 P1 O100 ; set gear warning temperature when filament change\n{endif}\n" + "type": "machine", + "name": "Bambu Lab A2L 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM056", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab A2L", + "printer_variant": "0.4", + "auxiliary_fan": "0", + "bed_exclude_area": [], + "bed_heat_soak_area": [ + "102x93.4", + "228x93.4", + "228x226.6", + "102x226.6", + "60x49", + "270x49", + "270x271", + "60x271" + ], + "default_filament_profile": [ + "Bambu PLA Basic @BBL A2L 0.4 nozzle" + ], + "default_print_profile": "0.20mm Standard @BBL A2L", + "default_wipe_tower_pos": "0.0x1.0", + "deretract_speed_extruder_change": [ + "30" + ], + "enable_long_retraction_when_cut": "2", + "extruder_clearance_dist_to_rod": "56.5", + "extruder_clearance_height_to_lid": "325", + "extruder_clearance_height_to_rod": "25", + "extruder_clearance_max_radius": "73", + "grab_length": [ + "17.4" + ], + "head_wrap_detect_zone": [ + "226x224", + "256x224", + "256x256", + "226x256" + ], + "include": [ + "Bambu Lab A2L 0.4 nozzle template machine_start_gcode", + "Bambu Lab A2L 0.4 nozzle template machine_end_gcode", + "Bambu Lab A2L 0.4 nozzle template layer_change_gcode", + "Bambu Lab A2L 0.4 nozzle template time_lapse_gcode", + "Bambu Lab A2L 0.4 nozzle template change_filament_gcode" + ], + "machine_bed_mass_Y": "2700", + "machine_load_filament_time": "11", + "machine_max_acceleration_extruding": [ + "12000", + "12000" + ], + "machine_max_acceleration_x": [ + "12000", + "12000" + ], + "machine_max_acceleration_y": [ + "8000", + "8000" + ], + "machine_max_acceleration_z": [ + "1500", + "1500" + ], + "machine_max_force_Y": "29", + "machine_max_jerk_e": [ + "3", + "3" + ], + "machine_max_printed_mass": "2000", + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_unload_filament_time": "12", + "nozzle_height": "4.76", + "nozzle_volume": [ + "92" + ], + "printable_area": [ + "0x0", + "330x0", + "330x320", + "0x320" + ], + "printable_height": "325", + "printer_structure": "i3", + "retract_lift_below": [ + "326" + ], + "support_fast_purge_mode": "1", + "support_object_skip_flush": "1", + "upward_compatible_machine": [ + "Bambu Lab H2S 0.4 nozzle" + ], + "default_ams_type": "2", + "ams_filament_load_time_ams": "23", + "ams_filament_load_time_ams_lite": "11", + "ams_filament_load_time_n3f_s": "18", + "ams_filament_unload_time_ams": "21", + "ams_filament_unload_time_ams_lite": "12", + "ams_filament_unload_time_n3f_s": "19" } diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.6 nozzle.json index 56a902f6a2..fa164e3b25 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.6 nozzle.json @@ -1,37 +1,37 @@ { - "type": "machine", - "name": "Bambu Lab A2L 0.6 nozzle", - "inherits": "Bambu Lab A2L 0.4 nozzle", - "from": "system", - "setting_id": "GM057", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab A2L", - "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A2L 0.6 nozzle" - ], - "default_print_profile": "0.30mm Standard @BBL A2L 0.6 nozzle", - "machine_max_speed_x": [ - "500", - "200" - ], - "machine_max_speed_y": [ - "500", - "200" - ], - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "retract_lift_below": [ - "326" - ], - "upward_compatible_machine": [ - "Bambu Lab H2S 0.6 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A2L 0.6 nozzle", + "inherits": "Bambu Lab A2L 0.4 nozzle", + "from": "system", + "setting_id": "GM057", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab A2L", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A2L 0.6 nozzle" + ], + "default_print_profile": "0.30mm Standard @BBL A2L 0.6 nozzle", + "machine_max_speed_x": [ + "500", + "200" + ], + "machine_max_speed_y": [ + "500", + "200" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retract_lift_below": [ + "326" + ], + "upward_compatible_machine": [ + "Bambu Lab H2S 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab A2L 0.8 nozzle.json index 20cf48518c..770a1e9987 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab A2L 0.8 nozzle.json @@ -1,37 +1,37 @@ { - "type": "machine", - "name": "Bambu Lab A2L 0.8 nozzle", - "inherits": "Bambu Lab A2L 0.4 nozzle", - "from": "system", - "setting_id": "GM058", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab A2L", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL A2L 0.8 nozzle" - ], - "default_print_profile": "0.40mm Standard @BBL A2L 0.8 nozzle", - "machine_max_speed_x": [ - "500", - "200" - ], - "machine_max_speed_y": [ - "500", - "200" - ], - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "retract_lift_below": [ - "326" - ], - "upward_compatible_machine": [ - "Bambu Lab H2S 0.8 nozzle" - ] + "type": "machine", + "name": "Bambu Lab A2L 0.8 nozzle", + "inherits": "Bambu Lab A2L 0.4 nozzle", + "from": "system", + "setting_id": "GM058", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab A2L", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL A2L 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL A2L 0.8 nozzle", + "machine_max_speed_x": [ + "500", + "200" + ], + "machine_max_speed_y": [ + "500", + "200" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_lift_below": [ + "326" + ], + "upward_compatible_machine": [ + "Bambu Lab H2S 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab A2L.json b/resources/profiles/BBL/machine/Bambu Lab A2L.json index 62a9a0fddf..fd031b21e8 100644 --- a/resources/profiles/BBL/machine/Bambu Lab A2L.json +++ b/resources/profiles/BBL/machine/Bambu Lab A2L.json @@ -1,17 +1,18 @@ { - "type": "machine_model", - "name": "Bambu Lab A2L", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-H2C.stl", - "bed_texture": "bbl-3dp-logo.svg", - "bottom_texture_rect_longer": "45, -14.5, 240, 8", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "image_bed_type": "o", - "machine_tech": "FFF", - "model_id": "N9", - "not_support_bed_type": "Cool Plate", - "use_double_extruder_default_texture": "true", - "default_materials": "Bambu PLA Matte @BBL A2L 0.4 nozzle;Bambu PLA Basic @BBL A2L 0.4 nozzle;Bambu PLA Silk @BBL A2L 0.4 nozzle;Bambu Support For PLA/PETG @BBL A2L;Bambu TPU 95A @BBL A2L;Bambu PLA Tough @BBL A2L;Generic PLA @BBL A2L;Generic PLA High Speed @BBL A2L;Generic PETG @BBL A2L;Generic PVA @BBL A2L;Bambu PETG HF @BBL A2L;Bambu PLA Basic @BBL A2L 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab A2L", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-H2C.stl", + "bed_texture": "bbl-3dp-logo.svg", + "bottom_texture_rect_longer": "45, -14.5, 240, 8", + "bottom_texture_rect_longer_ignore_list": "High Temp Plate;Textured PEI Plate", + "default_bed_type": "Textured PEI Plate", + "family": "BBL-3DP", + "image_bed_type": "o", + "machine_tech": "FFF", + "model_id": "N9", + "not_support_bed_type": "Cool Plate", + "use_double_extruder_default_texture": "true", + "default_materials": "Bambu PLA Matte @BBL A2L 0.4 nozzle;Bambu PLA Basic @BBL A2L 0.4 nozzle;Bambu PLA Silk @BBL A2L 0.4 nozzle;Bambu Support For PLA/PETG @BBL A2L;Bambu TPU 95A @BBL A2L;Bambu PLA Tough @BBL A2L;Generic PLA @BBL A2L;Generic PLA High Speed @BBL A2L;Generic PETG @BBL A2L;Generic PVA @BBL A2L;Bambu PETG HF @BBL A2L;Bambu PLA Basic @BBL A2L 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.2 nozzle.json index 1f1f1c4314..dfa0d4fab7 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.2 nozzle.json @@ -1,38 +1,330 @@ { - "type": "machine", - "name": "Bambu Lab H2C 0.2 nozzle", - "inherits": "Bambu Lab H2C 0.4 nozzle", - "from": "system", - "setting_id": "GM042", - "instantiation": "true", - "nozzle_diameter": [ - "0.2", - "0.2" - ], - "printer_model": "Bambu Lab H2C", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2C 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL H2C 0.2 nozzle", - "max_layer_height": [ - "0.14", - "0.14" - ], - "min_layer_height": [ - "0.04", - "0.04" - ], - "retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "upward_compatible_machine": [ - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab A2L 0.2 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab H2C 0.2 nozzle", + "inherits": "Bambu Lab H2C 0.4 nozzle", + "from": "system", + "setting_id": "GM042", + "instantiation": "true", + "nozzle_diameter": [ + "0.2", + "0.2" + ], + "printer_model": "Bambu Lab H2C", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2C 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL H2C 0.2 nozzle", + "max_layer_height": [ + "0.14", + "0.14" + ], + "min_layer_height": [ + "0.04", + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "hotend_cooling_rate": [ + "1.6", + "1.6", + "3.4", + "3.4" + ], + "hotend_heating_rate": [ + "3.5", + "3.5", + "13.3", + "13.3" + ], + "long_retractions_when_cut": [ + "1", + "1", + "1", + "1" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "14", + "14", + "14", + "14" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], + "nozzle_volume": [ + "130", + "133", + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..cd7b05a26e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2C 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";======== H2C filament_change ========\n;===== 20260413 =====\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_filament_id]A H[next_hotend]\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if wipe_tower_center_pos_valid}\n M620.14 X[wipe_tower_center_pos_x] Y[wipe_tower_center_pos_y]\n{else}\n M620.14 X95.5 Y336\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n\nM620.15 P[filament_pre_cooling_temperature_nc[next_filament_id]]\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\nM620.11 O1 T[filament_retract_length_nc]\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\nM628 S1\n{if filament_type[current_filament_id] == \"TPU\"}\nM620.11 S0 L0 I[current_filament_id] B[current_hotend] E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\n{if (filament_type[current_filament_id] == \"PA\") || (filament_type[current_filament_id] == \"PA-GF\")}\nM620.11 S1 L0 I[current_filament_id] B[current_hotend] R4 D2 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 S1 L0 I[current_filament_id] B[current_hotend] R10 D8 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{endif}\n{endif}\nM629\n\n{if (filament_type[current_filament_id] == \"TPU\") && (filament_map[current_filament_id] == 2) && (nozzle_volume_types[current_nozzle_id] != \"TPU High Flow\")}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\n{if (nozzle_volume_types[current_nozzle_id] == \"TPU High Flow\") && (filament_map[current_filament_id] == 2) && (filament_map[next_filament_id] == 1)}\n;sw from R2L&TPU kit, travel run a distance for sketch TPU\nG1 X30 Y30 F5000\nM400\nG1 X300 Y30 F5000\nM400\n{endif}\n\nT[next_filament_id] H[next_hotend]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if (filament_type[next_filament_id] == \"PA\") || (filament_type[next_filament_id] == \"PA-GF\")}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; compensate for heating and cooling\n{if flush_length > 0}\n{if flush_temperatures[next_filament_id] > new_filament_temp}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{else}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{endif}\n{endif}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\n\n\nM620.10 R{new_extruder_retracted_length}\n\n{if (print_sequence == \"by object\" && !has_wipe_tower)}\nM628 S0 F1 L10.0\n; VFLUSH_START\n;VG1 E10 F[new_filament_e_feedrate]\n; VFLUSH_END\n{else}\nM628 S0\n{endif}\n;VM109 S[new_filament_temp]\n\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\n\n\nM400\n{if wipe_avoid_perimeter}\nG387 Y320 J1 F10000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG387 Y295 J1 F30000\nG387 Y265 J1 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_filament_id]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\nM400\n{if wipe_avoid_perimeter}\nG387 Y320 J1 F10000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG387 Y295 J1 F30000\nG387 Y265 J1 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_filament_id] H[next_hotend] W1 ;enable ams air printing detect\nM620 O{toolchange_count + 1}\nM1002 gcode_claim_action : 0" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..696236228e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2C 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..e5e8e71c3c --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2C 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== machine: H2C end =====\n;====== date: 20260729 ======\n\nM1003 S0\nM73 P100 R0\n\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\nM640.2 R0\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P9 S0 ; turn off ext toodhead cooling fan\n\n; pull back filament to AMS\nM620 S65535\n{if long_retraction_when_cut}\nM620.11 P1 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.11 P1 I[current_filament_id] B[current_hotend] E-14\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (100.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 100.0 - max_layer_z/2) < 320}\n G1 Z{max_layer_z + 100.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 98.0 - max_layer_z/2}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 320}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P6 S255\nM400 S180\nM106 P6 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S127\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99\nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99\nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99\nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99\nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0\nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99\nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0\nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99\nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..5132ccee2e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2C 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: H2C =========================\n;===== date: 20260608 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\nM960 S10 P1 ; ext fan led\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99\nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM1002 set_gcode_claim_speed_level 5 ;Reset speed level\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1\nM901 D4\nM481 S0 ; turn off cutter pos comp\nG28.140 D0; reset pre-extrude z pos\n;===== reset machine status =================\n\nM620 M ;enable remap\nM620 N ;enable hotend remap\nM620 T0 ;print tmpr\nM620 T1 ;sn -> pos\nM620 T2 ;filament_id\n\n;===== start to heat heatbed & hotend==========\n\n M104 O-80 A\n M140 D[bed_temperature_initial_layer_single]\n\n;===== start to heat heatbead & hotend==========\n\n;===== avoid end stop =================\nG91\nG380 S2 Z42 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ====\n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{if(cooling_filter_enabled)}\nM145.2 P0 F0\n{else}\nM145.2 P0 F1\n{endif}\n{endif}\n;==== set airduct mode ====\n\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nM640 S\nM640.1 R\nM641\nG28 X T300\nT1000\n\nG150.3\nM972 S24 P0 T2000 ; live-view camera foolproof\nM972 S46 P0 T5000 ; vortek anti-collision\nM640.1 S\nM640.4\n{if (first_non_support_filaments[0] != -1)}\nM640 S\nM640.8 T A{first_non_support_filaments[0]} H{first_non_support_hotend[0]}\nM640.7 L\nM641\n{endif}\n\n\n{if wipe_tower_center_pos_valid}\n M620.14 X[wipe_tower_center_pos_x] Y[wipe_tower_center_pos_y]\n{else}\n M620.14 X95.5 Y336\n{endif}\n\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\n\nM1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\nM104 S0\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nM972 S41 P0 T5000 ; trash can anti-collision\n\nM1009 Q1 L1\nG91\nG380 S2 Z30 F1200 ; lower heatbed to move toolhead\nG90\nG1 X175 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n\n;===== first homing end =====\n\n;===== detection start =====\n\nM1002 judge_flag build_plate_detect_flag\nM104 S0\nM622 S1\n ;M1002 gcode_claim_action : 11 ; Indentifying build plate type\n M972 S19 P0 C0 ; heatbed presence detection\n M972 S31 P0 T5000 ; toolhead camera dirty detection\n ;M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 T5000 ; heatbed plate offset detection\nM623\n\nM1002 gcode_claim_action : 72 ; Hotend Type Detection\nT1001\nM972 S14 P0 T5000 ; nozzle type detection\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\nG151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n\n{if max_print_z >= 145}\nM1002 gcode_claim_action : 75 ; Heatbed underside foreign object detection\nG3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n{endif}\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\nM620.11 P1 I[initial_no_support_filament_id] B[initial_no_support_hotend] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_filament_id] B[initial_no_support_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_filament_id] == \"PA\") || (filament_type[initial_no_support_filament_id] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R4 D2 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R10 D8 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_filament_id] H[initial_no_support_hotend]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM621 S[initial_no_support_filament_id]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\nM400\nM106 P1 S0\n\nG91\nG1 Y-16 F60000\nG90\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\n\nM400\n;M73 P99\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J2\n M1002 gcode_claim_action : 54\n M190 D[bed_temperature_initial_layer_single]\n\n M1002 gcode_claim_action : 39\n M620 D[initial_no_support_hotend]\n G383.3 U140 L{initial_no_support_filament_id}\nM623\n\nM622 J1\n M1002 gcode_claim_action : 54\n M190 D[bed_temperature_initial_layer_single]\n\n M1002 gcode_claim_action : 39\n M620 D[initial_no_support_hotend]\n G383 O2 U140 L{initial_no_support_filament_id}\nM623\n\n;===== xy ofst cali end =====\n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n G150.3\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n G150.3\n M106 P1 S0\n M400 S2\n M109 S{nozzle_temperature[initial_no_support_filament_id]} ; wait tmpr to extrude\n M83\n {if(nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8)}\n G1 E60 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {else}\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {endif}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\nM622 J0\n G91\n G1 Z5 F1200\n G90\n M1012.7\n G383.7 U140 J0\nM623\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z10 F1200\n{if (first_non_support_filaments[0] != -1) && filament_type[initial_no_support_filament_id] != \"TPU\"}\nM640 S\nM640.7 U\nM640.7 L\nM640.2 R1\nM641\n{endif}\nG90\nG1 X175 Y160 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n M400\nM623\n\nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\nM623\n\nM622 J0\n G28 R\nM623\n\n;===== bed leveling end ================================\n\nG39.1 ; cali nozzle wrapped detection pos\n\nG90\nG1 Z5 F1200\nG1 X270 Y-0.5 F60000\nG28.140 S0 ; cali pre-extrude z pos\n\n;============switch again==================\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM620 S[initial_no_support_filament_id]A H[initial_no_support_hotend]\nM400\nT[initial_no_support_filament_id] H[initial_no_support_hotend]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_filament_id]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\nM141 S[overall_chamber_temperature]\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X165 Y160 F20000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n\n M975 S1\n;===== mech mode sweep end =====\n\n;===== wait temperature reaching the reference value =======\n\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n ;==== set ext toodhead cooling fan ====\n {if (min_vitrification_temperature <= 50)}\n M106 P9 S255\n {endif}\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{-0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n {else}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{0.01}\n {endif}\n {endif}\nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation\nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14 R0\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n\n ========== record data ==========\n M1026\n M1012.8\n M1012.9\n G29.9\n ========== record data ==========\n\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M83\n{if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G1 X290 E10 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] H[initial_no_support_hotend] W1 ;enable ams air printing detect\nM620 O1\n\nM211 Z1\nG29.99\nM1002 gcode_claim_action : 0\nM400\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..927c2fde97 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2C 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";===== machine: H2C timelapse =====\n;======== date: 20260731 ========\n\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n {if !spiral_mode && !timelapse_inline_photo}\n M993 A2 B2 C2\n M993 A0 B0 C0\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {elsif has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n \n {if !spiral_mode && !timelapse_inline_photo}\n M993 A3 B3 C3\n {endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode.json new file mode 100644 index 0000000000..4183c059cd --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode", + "instantiation": "false", + "wrapping_detection_gcode": ";===== machine: H2C =========================\n;===== date: 20251104 =====================\n\n{if !spiral_mode}\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y295 F30000\n G1 Y265 F18000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n{endif}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle.json index 867e419c60..95b7be94be 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.4 nozzle.json @@ -10,12 +10,26 @@ "0.4" ], "printer_model": "Bambu Lab H2C", - "printer_variant": "0.4", "farthest_point_timelapse": "1", + "printer_variant": "0.4", "default_filament_profile": [ "Bambu PLA Basic @BBL H2C" ], "default_print_profile": "0.20mm Standard @BBL H2C", + "deretraction_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15", + "15" + ], "enable_long_retraction_when_cut": [ "2" ], @@ -23,6 +37,7 @@ "extruder_clearance_height_to_lid": "201", "extruder_clearance_height_to_rod": "47.4", "extruder_clearance_max_radius": "96", + "extruder_height_gap": "5", "extruder_printable_area": [ "0x0,325x0,325x320,0x320", "25x0,330x0,330x320,25x320" @@ -31,26 +46,174 @@ "1", "6" ], + "extruder_clearance_dist_to_rod": "50", + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive E3D High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], "fan_direction": "left", "hotend_cooling_rate": [ + "1.6", "1.6", "1.6", "3.4", "3.4" ], "hotend_heating_rate": [ + "3.5", "3.5", "3.5", "13.3", "13.3" ], + "include": [ + "Bambu Lab H2C 0.4 nozzle template machine_start_gcode", + "Bambu Lab H2C 0.4 nozzle template machine_end_gcode", + "Bambu Lab H2C 0.4 nozzle template time_lapse_gcode", + "Bambu Lab H2C 0.4 nozzle template wrapping_detection_gcode", + "Bambu Lab H2C 0.4 nozzle template change_filament_gcode", + "Bambu Lab H2C 0.4 nozzle template layer_change_gcode" + ], "long_retractions_when_cut": [ "1", "1", "1", + "1", "1" ], "machine_load_filament_time": "15", + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], "machine_max_speed_x": [ "1000", "1000", @@ -59,6 +222,8 @@ "1000", "1000", "1000", + "1000", + "1000", "1000" ], "machine_max_speed_y": [ @@ -69,6 +234,8 @@ "1000", "1000", "1000", + "1000", + "1000", "1000" ], "machine_max_speed_z": [ @@ -79,9 +246,12 @@ "30", "30", "30", + "30", + "30", "30" ], "machine_unload_filament_time": "15", + "master_extruder_id": "2", "machine_max_speed_e": [ "50", "50", @@ -90,12 +260,21 @@ "50", "50", "50", + "50", + "50", "50" ], - "master_extruder_id": "2", + "nozzle_flush_dataset": [ + "1", + "2", + "2", + "1", + "2" + ], "nozzle_volume": [ "130", "133", + "133", "145", "148" ], @@ -105,35 +284,142 @@ "330x320", "0x320" ], + "printer_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0", + "0" + ], "retract_lift_below": [ "319", "319", "319", + "319", "319" ], "retraction_distances_when_cut": [ "14", "14", "14", + "14", "14" ], + "retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", + "1" + ], "support_chamber_temp_control": "1", "support_cooling_filter": "1", + "support_object_skip_flush": "0", + "unprintable_filament_types": [ + "TPU", + "PPS-CF,PPA-CF" + ], + "wipe": [ + "1", + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2", + "2" + ], "wrapping_exclude_area": [ "145x310", "251x310", "251x326", "145x326" ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], "upward_compatible_machine": [ "Bambu Lab H2S 0.4 nozzle", "Bambu Lab H2D 0.4 nozzle", "Bambu Lab H2D Pro 0.4 nozzle", "Bambu Lab A2L 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: H2C =========================\n;===== date: 20260608 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\nM960 S10 P1 ; ext fan led\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99\nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM1002 set_gcode_claim_speed_level 5 ;Reset speed level\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1\nM901 D4\nM481 S0 ; turn off cutter pos comp\nG28.140 D0; reset pre-extrude z pos\n;===== reset machine status =================\n\nM620 M ;enable remap\nM620 N ;enable hotend remap\nM620 T0 ;print tmpr\nM620 T1 ;sn -> pos\nM620 T2 ;filament_id\n\n;===== start to heat heatbed & hotend==========\n\n M104 O-80 A\n M140 D[bed_temperature_initial_layer_single]\n\n;===== start to heat heatbead & hotend==========\n\n;===== avoid end stop =================\nG91\nG380 S2 Z42 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ====\n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{if(cooling_filter_enabled)}\nM145.2 P0 F0\n{else}\nM145.2 P0 F1\n{endif}\n{endif}\n;==== set airduct mode ====\n\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nM640 S\nM640.1 R\nM641\nG28 X T300\nT1000\n\nG150.3\nM972 S24 P0 T2000 ; live-view camera foolproof\nM972 S46 P0 T5000 ; vortek anti-collision\nM640.1 S\nM640.4\n{if (first_non_support_filaments[0] != -1)}\nM640 S\nM640.8 T A{first_non_support_filaments[0]} H{first_non_support_hotend[0]}\nM640.7 L\nM641\n{endif}\n\n\n{if wipe_tower_center_pos_valid}\n M620.14 X[wipe_tower_center_pos_x] Y[wipe_tower_center_pos_y]\n{else}\n M620.14 X95.5 Y336\n{endif}\n\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\n\nM1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\nM104 S0\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nM972 S41 P0 T5000 ; trash can anti-collision\n\nM1009 Q1 L1\nG91\nG380 S2 Z30 F1200 ; lower heatbed to move toolhead\nG90\nG1 X175 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n\n;===== first homing end =====\n\n;===== detection start =====\n\nM1002 judge_flag build_plate_detect_flag\nM104 S0\nM622 S1\n ;M1002 gcode_claim_action : 11 ; Indentifying build plate type\n M972 S19 P0 C0 ; heatbed presence detection\n M972 S31 P0 T5000 ; toolhead camera dirty detection\n ;M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 T5000 ; heatbed plate offset detection\nM623\n\nM1002 gcode_claim_action : 72 ; Hotend Type Detection\nT1001\nM972 S14 P0 T5000 ; nozzle type detection\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\nG151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n\n{if max_print_z >= 145}\nM1002 gcode_claim_action : 75 ; Heatbed underside foreign object detection\nG3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n{endif}\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\nM620.11 P1 I[initial_no_support_filament_id] B[initial_no_support_hotend] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_filament_id] B[initial_no_support_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_filament_id] == \"PA\") || (filament_type[initial_no_support_filament_id] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R4 D2 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R10 D8 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_filament_id] H[initial_no_support_hotend]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM621 S[initial_no_support_filament_id]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\nM400\nM106 P1 S0\n\nG91\nG1 Y-16 F60000\nG90\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\n\nM400\n;M73 P99\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J2\n M1002 gcode_claim_action : 54\n M190 D[bed_temperature_initial_layer_single]\n\n M1002 gcode_claim_action : 39\n M620 D[initial_no_support_hotend]\n G383.3 U140 L{initial_no_support_filament_id}\nM623\n\nM622 J1\n M1002 gcode_claim_action : 54\n M190 D[bed_temperature_initial_layer_single]\n\n M1002 gcode_claim_action : 39\n M620 D[initial_no_support_hotend]\n G383 O2 U140 L{initial_no_support_filament_id}\nM623\n\n;===== xy ofst cali end =====\n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n G150.3\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n G150.3\n M106 P1 S0\n M400 S2\n M109 S{nozzle_temperature[initial_no_support_filament_id]} ; wait tmpr to extrude\n M83\n {if(nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8)}\n G1 E60 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {else}\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {endif}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\nM622 J0\n G91\n G1 Z5 F1200\n G90\n M1012.7\n G383.7 U140 J0\nM623\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z10 F1200\n{if (first_non_support_filaments[0] != -1) && filament_type[initial_no_support_filament_id] != \"TPU\"}\nM640 S\nM640.7 U\nM640.7 L\nM640.2 R1\nM641\n{endif}\nG90\nG1 X175 Y160 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n M400\nM623\n\nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\nM623\n\nM622 J0\n G28 R\nM623\n\n;===== bed leveling end ================================\n\nG39.1 ; cali nozzle wrapped detection pos\n\nG90\nG1 Z5 F1200\nG1 X270 Y-0.5 F60000\nG28.140 S0 ; cali pre-extrude z pos\n\n;============switch again==================\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM620 S[initial_no_support_filament_id]A H[initial_no_support_hotend]\nM400\nT[initial_no_support_filament_id] H[initial_no_support_hotend]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_filament_id]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\nM141 S[overall_chamber_temperature]\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X165 Y160 F20000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n\n M975 S1\n;===== mech mode sweep end =====\n\n;===== wait temperature reaching the reference value =======\n\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n ;==== set ext toodhead cooling fan ====\n {if (min_vitrification_temperature <= 50)}\n M106 P9 S255\n {endif}\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{-0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n {else}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{0.01}\n {endif}\n {endif}\nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation\nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14 R0\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n\n ========== record data ==========\n M1026\n M1012.8\n M1012.9\n G29.9\n ========== record data ==========\n\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M83\n{if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G1 X290 E10 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] H[initial_no_support_hotend] W1 ;enable ams air printing detect\nM620 O1\n\nM211 Z1\nG29.99\nM1002 gcode_claim_action : 0\nM400\n", - "machine_end_gcode": ";===== machine: H2C end =====\n;====== date: 20260313 ======\n\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\nM640.2 R0\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P9 S0 ; turn off ext toodhead cooling fan\n\n; pull back filament to AMS\nM620 S65535\n{if long_retraction_when_cut}\nM620.11 P1 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.11 P1 I[current_filament_id] B[current_hotend] E-14\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (100.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 100.0 - max_layer_z/2) < 320}\n G1 Z{max_layer_z + 100.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 98.0 - max_layer_z/2}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 320}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P6 S255\nM400 S180\nM106 P6 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S127\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99\nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99\nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99\nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99\nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0\nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99\nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0\nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99\nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n", - "time_lapse_gcode": ";===== machine: H2C timelapse =====\n;======== date: 20260603 ========\n\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n {if !spiral_mode}\n M993 A2 B2 C2\n M993 A0 B0 C0\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {elsif has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n \n {if !spiral_mode}\n M993 A3 B3 C3\n {endif}\nM623\n; SKIPPABLE_END\n", - "wrapping_detection_gcode": ";===== machine: H2C =========================\n;===== date: 20251104 =====================\n\n{if !spiral_mode}\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y295 F30000\n G1 Y265 F18000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n{endif}\n", - "change_filament_gcode": ";======== H2C filament_change ========\n;===== 20260413 =====\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_filament_id]A H[next_hotend]\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if wipe_tower_center_pos_valid}\n M620.14 X[wipe_tower_center_pos_x] Y[wipe_tower_center_pos_y]\n{else}\n M620.14 X95.5 Y336\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n\nM620.15 P[filament_pre_cooling_temperature_nc[next_filament_id]]\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\nM620.11 O1 T[filament_retract_length_nc]\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\nM628 S1\n{if filament_type[current_filament_id] == \"TPU\"}\nM620.11 S0 L0 I[current_filament_id] B[current_hotend] E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\n{if (filament_type[current_filament_id] == \"PA\") || (filament_type[current_filament_id] == \"PA-GF\")}\nM620.11 S1 L0 I[current_filament_id] B[current_hotend] R4 D2 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 S1 L0 I[current_filament_id] B[current_hotend] R10 D8 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{endif}\n{endif}\nM629\n\n{if (filament_type[current_filament_id] == \"TPU\") && (filament_map[current_filament_id] == 2) && (nozzle_volume_types[current_nozzle_id] != \"TPU High Flow\")}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\n{if (nozzle_volume_types[current_nozzle_id] == \"TPU High Flow\") && (filament_map[current_filament_id] == 2) && (filament_map[next_filament_id] == 1)}\n;sw from R2L&TPU kit, travel run a distance for sketch TPU\nG1 X30 Y30 F5000\nM400\nG1 X300 Y30 F5000\nM400\n{endif}\n\nT[next_filament_id] H[next_hotend]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if (filament_type[next_filament_id] == \"PA\") || (filament_type[next_filament_id] == \"PA-GF\")}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; compensate for heating and cooling\n{if flush_length > 0}\n{if flush_temperatures[next_filament_id] > new_filament_temp}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{else}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{endif}\n{endif}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\n\n\nM620.10 R{new_extruder_retracted_length}\n\n{if (print_sequence == \"by object\" && !has_wipe_tower)}\nM628 S0 F1 L10.0\n; VFLUSH_START\n;VG1 E10 F[new_filament_e_feedrate]\n; VFLUSH_END\n{else}\nM628 S0\n{endif}\n;VM109 S[new_filament_temp]\n\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\n\n\nM400\n{if wipe_avoid_perimeter}\nG387 Y320 J1 F10000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG387 Y295 J1 F30000\nG387 Y265 J1 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_filament_id]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\nM400\n{if wipe_avoid_perimeter}\nG387 Y320 J1 F10000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG387 Y295 J1 F30000\nG387 Y265 J1 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_filament_id] H[next_hotend] W1 ;enable ams air printing detect\nM620 O{toolchange_count + 1}\nM1002 gcode_claim_action : 0" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.6 nozzle.json index 7174ec6f93..4860dac550 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.6 nozzle.json @@ -1,38 +1,39 @@ { - "type": "machine", - "name": "Bambu Lab H2C 0.6 nozzle", - "inherits": "Bambu Lab H2C 0.4 nozzle", - "from": "system", - "setting_id": "GM043", - "instantiation": "true", - "nozzle_diameter": [ - "0.6", - "0.6" - ], - "printer_model": "Bambu Lab H2C", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL H2C 0.6 nozzle", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2C 0.6 nozzle" - ], - "max_layer_height": [ - "0.42", - "0.42" - ], - "min_layer_height": [ - "0.12", - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4", - "1.4", - "1.4" - ], - "upward_compatible_machine": [ - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab A2L 0.6 nozzle" - ] + "type": "machine", + "name": "Bambu Lab H2C 0.6 nozzle", + "inherits": "Bambu Lab H2C 0.4 nozzle", + "from": "system", + "setting_id": "GM043", + "instantiation": "true", + "nozzle_diameter": [ + "0.6", + "0.6" + ], + "printer_model": "Bambu Lab H2C", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL H2C 0.6 nozzle", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2C 0.6 nozzle" + ], + "max_layer_height": [ + "0.42", + "0.42" + ], + "min_layer_height": [ + "0.12", + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4", + "1.4", + "1.4", + "1.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2C 0.8 nozzle.json index 67da881c6d..7ff6023625 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2C 0.8 nozzle.json @@ -1,38 +1,330 @@ { - "type": "machine", - "name": "Bambu Lab H2C 0.8 nozzle", - "inherits": "Bambu Lab H2C 0.4 nozzle", - "from": "system", - "setting_id": "GM044", - "instantiation": "true", - "nozzle_diameter": [ - "0.8", - "0.8" - ], - "printer_model": "Bambu Lab H2C", - "printer_variant": "0.8", - "default_print_profile": "0.40mm Standard @BBL H2C 0.8 nozzle", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2C 0.8 nozzle" - ], - "max_layer_height": [ - "0.56", - "0.56" - ], - "min_layer_height": [ - "0.16", - "0.16" - ], - "retraction_length": [ - "3", - "3", - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab A2L 0.8 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab H2C 0.8 nozzle", + "inherits": "Bambu Lab H2C 0.4 nozzle", + "from": "system", + "setting_id": "GM044", + "instantiation": "true", + "nozzle_diameter": [ + "0.8", + "0.8" + ], + "printer_model": "Bambu Lab H2C", + "printer_variant": "0.8", + "default_print_profile": "0.40mm Standard @BBL H2C 0.8 nozzle", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2C 0.8 nozzle" + ], + "max_layer_height": [ + "0.56", + "0.56" + ], + "min_layer_height": [ + "0.16", + "0.16" + ], + "retraction_length": [ + "3", + "3", + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "hotend_cooling_rate": [ + "1.6", + "1.6", + "3.4", + "3.4" + ], + "hotend_heating_rate": [ + "3.5", + "3.5", + "13.3", + "13.3" + ], + "long_retractions_when_cut": [ + "1", + "1", + "1", + "1" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "14", + "14", + "14", + "14" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], + "nozzle_volume": [ + "130", + "133", + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2C.json b/resources/profiles/BBL/machine/Bambu Lab H2C.json index b9734a34c5..287754bacc 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2C.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2C.json @@ -1,16 +1,17 @@ { - "type": "machine_model", - "name": "Bambu Lab H2C", - "nozzle_diameter": "0.2;0.4;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-H2C.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "bottom_texture_rect_longer": "45, -14.5, 240, 8", - "image_bed_type": "o", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "O1C2", - "not_support_bed_type": "Cool Plate;Smooth PEI Plate / High Temp Plate", - "default_materials": "Bambu PLA Basic @BBL H2C;Bambu PLA-CF @BBL H2C;Bambu PETG Basic @BBL H2C;Bambu ABS @BBL H2C;Bambu PETG HF @BBL H2C;Bambu PLA Silk @BBL H2C;Bambu PLA Matte @BBL H2C;Bambu PC @BBL H2C;Bambu PA-CF @BBL H2C;Bambu PLA Pure @BBL H2C;Bambu PLA Basic @BBL H2C 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab H2C", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-H2C.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "bottom_texture_rect_longer": "45, -14.5, 240, 8", + "bottom_texture_rect_longer_ignore_list": "High Temp Plate;Textured PEI Plate", + "image_bed_type": "o", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "O1C2", + "not_support_bed_type": "Cool Plate;Smooth PEI Plate / High Temp Plate", + "default_materials": "Bambu PLA Basic @BBL H2C;Bambu PLA-CF @BBL H2C;Bambu PETG Basic @BBL H2C;Bambu ABS @BBL H2C;Bambu PETG HF @BBL H2C;Bambu PLA Silk @BBL H2C;Bambu PLA Matte @BBL H2C;Bambu PC @BBL H2C;Bambu PA-CF @BBL H2C;Bambu PLA Pure @BBL H2C;Bambu PLA Basic @BBL H2C 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json index 5f4e504a7d..a49f262539 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.2 nozzle.json @@ -1,333 +1,327 @@ { - "type": "machine", - "name": "Bambu Lab H2D 0.2 nozzle", - "inherits": "Bambu Lab H2D 0.4 nozzle", - "from": "system", - "setting_id": "GM034", - "instantiation": "true", - "nozzle_diameter": [ - "0.2", - "0.2" - ], - "printer_model": "Bambu Lab H2D", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2D 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL H2D 0.2 nozzle", - "max_layer_height": [ - "0.14", - "0.14" - ], - "min_layer_height": [ - "0.04", - "0.04" - ], - "retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ], - "deretraction_speed": [ - "30", - "30", - "30", - "30" - ], - "deretract_speed_extruder_change": [ - "15", - "15", - "15", - "15" - ], - "hotend_cooling_rate": [ - "2", - "2", - "2", - "2" - ], - "hotend_heating_rate": [ - "3.6", - "3.6", - "3.6", - "3.6" - ], - "long_retractions_when_cut": [ - "0", - "0", - "0", - "0" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "500", - "500", - "500", - "500", - "500", - "500", - "500" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3", - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_z": [ - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30" - ], - "nozzle_flush_dataset": [ - "1", - "2", - "1", - "2" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel" - ], - "nozzle_volume": [ - "130", - "133", - "145", - "148" - ], - "printer_extruder_id": [ - "1", - "1", - "2", - "2" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%", - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2", - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0", - "0", - "0" - ], - "retract_lift_below": [ - "319", - "319", - "319", - "319" - ], - "retract_restart_extra": [ - "0", - "0", - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0", - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1", - "1", - "1" - ], - "retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "retraction_minimum_travel": [ - "1", - "1", - "1", - "1" - ], - "retraction_speed": [ - "30", - "30", - "30", - "30" - ], - "wipe": [ - "1", - "1", - "1", - "1" - ], - "wipe_distance": [ - "2", - "2", - "2", - "2" - ], - "z_hop": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift", - "Auto Lift", - "Auto Lift" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow", - "Direct Drive Standard,Direct Drive High Flow" - ] -} + "type": "machine", + "name": "Bambu Lab H2D 0.2 nozzle", + "inherits": "Bambu Lab H2D 0.4 nozzle", + "from": "system", + "setting_id": "GM034", + "instantiation": "true", + "nozzle_diameter": [ + "0.2", + "0.2" + ], + "printer_model": "Bambu Lab H2D", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2D 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL H2D 0.2 nozzle", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], + "hotend_cooling_rate": [ + "2", + "2", + "2", + "2" + ], + "hotend_heating_rate": [ + "3.6", + "3.6", + "3.6", + "3.6" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "max_layer_height": [ + "0.14", + "0.14" + ], + "min_layer_height": [ + "0.04", + "0.04" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "nozzle_volume": [ + "130", + "133", + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..5f276e3e25 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";======== H2D ========\n;===== 20260528 =====\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_filament_id]A H[next_hotend]\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\nM628 S1\n{if filament_type[current_filament_id] == \"TPU\"}\nM620.11 S0 L0 I[current_filament_id] B[current_hotend] E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\n{if (filament_type[current_filament_id] == \"PA\") || (filament_type[current_filament_id] == \"PA-GF\")}\nM620.11 S1 L0 I[current_filament_id] B[current_hotend] R4 D2 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 S1 L0 I[current_filament_id] B[current_hotend] R10 D8 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{endif}\n{endif}\nM629\n\n{if (filament_type[current_filament_id] == \"TPU\") && (filament_map[current_filament_id] == 2) && (nozzle_volume_types[current_nozzle_id] != \"TPU High Flow\")}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\n{if (nozzle_volume_types[current_nozzle_id] == \"TPU High Flow\") && (filament_map[current_filament_id] == 2) && (filament_map[next_filament_id] == 1)}\n;sw from R2L&TPU kit, travel run a distance for sketch TPU\nG1 X30 Y30 F5000\nM400\nG1 X300 Y30 F5000\nM400\n{endif}\n\nT[next_filament_id] H[next_hotend]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if (filament_type[next_filament_id] == \"PA\") || (filament_type[next_filament_id] == \"PA-GF\")}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; compensate for heating and cooling\n{if flush_length > 0}\n{if flush_temperatures[next_filament_id] > new_filament_temp}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(flush_temperatures[next_filament_id]-(new_filament_temp - filament_cooling_before_tower[next_filament_id]))/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{else}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_cooling_rate[filament_map[next_filament_id]-1]}\nSYNC T{(new_filament_temp - filament_cooling_before_tower[next_filament_id] -flush_temperatures[next_filament_id])/hotend_heating_rate[filament_map[next_filament_id]-1]}\n{endif}\n{endif}\n\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\n\nM620.10 R{new_extruder_retracted_length}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_filament_id]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_filament_id] H[next_hotend] W1 ;enable ams air printing detect\nM620 Q{toolchange_count + 1}\nM1002 gcode_claim_action : 0\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..86fc6203a6 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": ";======== H2D 20250710 layer_change ========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..c22aa7c986 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";========== H2D end ==========\n;===== date: 2026/07/29 =====\n\nM1003 S0\nM73 P100 R0\n\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P9 S0 ; turn off ext toodhead cooling fan\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (100.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 100.0 - max_layer_z/2) < 320}\n G1 Z{max_layer_z + 100.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 98.0 - max_layer_z/2}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 320}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P6 S255\nM400 S180\nM106 P6 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S127\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..519b801692 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: H2D =========================\n;===== date: 20260605 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\nM960 S10 P1 ; ext fan led\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99\nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM1002 set_gcode_claim_speed_level 5 ;Reset speed level\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1\nM901 D4\nM481 S0 ; turn off cutter pos comp\nG28.140 D0; reset pre-extrude z pos\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z42 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ====\n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n {if(cooling_filter_enabled)}\n M145.2 P0 F0\n {else}\n M145.2 P0 F1\n {endif}\n{endif}\n\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\n\nM1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nM972 S41 P0 T5000 ; trash can anti-collision\n\nM1009 Q1 L1\nG91\nG380 S2 Z30 F1200 ; lower heatbed to move toolhead\nG90\nG1 X175 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n ;M1002 gcode_claim_action : 11 ; Indentifying build plate type\n M972 S19 P0 C0 ; heatbed presence detection\n M972 S31 P0 T5000 ; toolhead camera dirty detection\n ;M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 T5000 ; heatbed plate offset detection\nM623\n\nM1002 gcode_claim_action : 72 ; Hotend Type Detection\nT1001\nM972 S14 P0 T5000 ; nozzle type detection\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\nG151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n\n{if max_print_z >= 145}\nM1002 gcode_claim_action : 75 ; Heatbed underside foreign object detection\nG3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n{endif}\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\nM620.11 P0 I[initial_no_support_filament_id] B[initial_no_support_hotend] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_filament_id] B[initial_no_support_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_filament_id] == \"PA\") || (filament_type[initial_no_support_filament_id] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R4 D2 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R10 D8 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_filament_id] H[initial_no_support_hotend]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM621 S[initial_no_support_filament_id]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M109 S{nozzle_temperature[initial_no_support_filament_id]} ; wait tmpr to extrude\n M83\n {if(nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8)}\n G1 E60 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {else}\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {endif}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X175 Y160 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n M400\nM623\n\nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\nM623\n\nM622 J0\n G28 R\nM623\n\n;===== bed leveling end ================================\n\n;===== z ofst cali start =====\n\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n\n G383 O0 M2 T140\n\n;===== z ofst cali end =====\n\nG39.1 ; cali nozzle wrapped detection pos\n\nG90\nG1 Z5 F1200\nG1 X270 Y-0.5 F60000\nG28.140 S0 ; cali pre-extrude z pos\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} A\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\nG29.9\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\nM400\n;M73 P99\n\nM1002 gcode_claim_action : 0\nM400\n\n;============switch again==================\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM620 S[initial_no_support_filament_id]A H[initial_no_support_hotend]\nM400\nT[initial_no_support_filament_id] H[initial_no_support_hotend]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_filament_id]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n ;==== set ext toodhead cooling fan ====\n {if (min_vitrification_temperature <= 50)}\n M106 P9 S255\n {endif}\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{-0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n {else}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{0.01}\n {endif}\n {endif}\n\nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation\nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14 R0\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M83\n{if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G1 X290 E10 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] H[initial_no_support_hotend] W1 ;enable ams air printing detect\nM620 Q1\n\nM211 Z1\nG29.99\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..d0bc930da5 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";======== H2D 20260731========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n {if !spiral_mode && !timelapse_inline_photo}\n M993 A2 B2 C2\n M993 A0 B0 C0\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M622.1 S0 ; for prev firmware, default turn off\n M1002 set_flag smooth_safe_pos_suppoprt_flag=1\n M1002 judge_flag smooth_safe_pos_suppoprt_flag\n \n M622 J0\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && timelapse_type == 0 && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} X{timelapse_pos_x} Y{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n\n M622 J1\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n {endif}\n \n {if !spiral_mode && !timelapse_inline_photo}\n M993 A3 B3 C3\n {endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template wrapping_detection_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template wrapping_detection_gcode.json new file mode 100644 index 0000000000..c174f3658d --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle template wrapping_detection_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D 0.4 nozzle template wrapping_detection_gcode", + "instantiation": "false", + "wrapping_detection_gcode": ";======== H2D 20250729 clumping ========\n{if !spiral_mode}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y295 F30000\n G1 Y265 F18000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json index 6259ce4946..7102ecef5b 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.4 nozzle.json @@ -10,131 +10,15 @@ "0.4" ], "printer_model": "Bambu Lab H2D", - "printer_variant": "0.4", "farthest_point_timelapse": "1", - "enable_long_retraction_when_cut": [ - "2" - ], - "enable_pre_heating": "1", - "extruder_clearance_dist_to_rod": "50", - "extruder_clearance_height_to_lid": "201", - "extruder_clearance_height_to_rod": "47.4", - "extruder_clearance_max_radius": "96", - "extruder_printable_area": [ - "0x0,325x0,325x320,0x320", - "25x0,350x0,350x320,25x320" - ], - "fan_direction": "left", - "hotend_heating_rate": [ - "3.6", - "3.6", - "3.6", - "3.6", - "3.6" - ], - "machine_load_filament_time": "30", - "machine_max_speed_e": [ - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_z": [ - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30" - ], - "machine_switch_extruder_time": "5.6", - "machine_unload_filament_time": "30", - "master_extruder_id": "2", - "nozzle_volume": [ - "130", - "133", - "145", - "148", - "148" - ], - "printable_area": [ - "0x0", - "350x0", - "350x320", - "0x320" - ], - "retract_lift_below": [ - "319", - "319", - "319", - "319", - "319" - ], - "retraction_distances_when_cut": [ - "10", - "10", - "10", - "10", - "10" - ], - "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "support_cooling_filter": "1", - "support_object_skip_flush": "1", - "wrapping_exclude_area": [ - "145x310", - "256x310", - "256x326", - "145x326" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: H2D =========================\n;===== date: 20260116 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\nM960 S10 P1 ; ext fan led\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM1002 set_gcode_claim_speed_level 5 ;Reset speed level\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\nG28.140 D0; reset pre-extrude z pos\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z42 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n {if(cooling_filter_enabled)}\n M145.2 P0 F0\n {else}\n M145.2 P0 F1\n {endif}\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\n\nM1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nM972 S41 P0 T5000 ; trash can anti-collision\n\nM1009 Q1 L1\nG91\nG380 S2 Z30 F1200 ; lower heatbed to move toolhead\nG90\nG1 X175 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n \nM1002 judge_flag build_plate_detect_flag\nM622 S1\n ;M1002 gcode_claim_action : 11 ; Indentifying build plate type\n M972 S19 P0 C0 ; heatbed presence detection\n M972 S31 P0 T5000 ; toolhead camera dirty detection\n ;M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 T5000 ; heatbed plate offset detection\nM623\n\nM1002 gcode_claim_action : 72 ; Hotend Type Detection\nT1001\nM972 S14 P0 T5000 ; nozzle type detection\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} T{filament_map[initial_no_support_extruder] % 2} ; rise temp in advance\n\nG151 P{filament_map[initial_no_support_extruder] % 2} M ; plug the heat nozzle\n\n{if max_print_z >= 145}\nM1002 gcode_claim_action : 75 ; Heatbed underside foreign object detection\nG3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n{endif}\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG\")) && (nozzle_diameter[initial_no_support_extruder] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60*0.8} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60*0.8} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{endif}\n\nM620.11 P0 I[initial_no_support_extruder] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_extruder] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_extruder] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_extruder] E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_extruder] == \"PA\") || (filament_type[initial_no_support_extruder] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_extruder] R4 D2 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_extruder] R10 D8 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M109 S{nozzle_temperature[initial_no_support_extruder]} ; wait tmpr to extrude\n M83\n {if(nozzle_diameter == 0.8)}\n G1 E60 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n {else}\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n {endif}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X175 Y160 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R \n M400\n M500 ; save cali data\nM623\n \nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\n M500 ; save cali data\nM623\n\nM622 J0\n G28 R\nM623\n\n;===== bed leveling end ================================\n\n;===== z ofst cali start =====\n\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n\n G383 O0 M2 T140\n M500\n\n;===== z ofst cali end =====\n\nG39.1 ; cali nozzle wrapped detection pos\nM500\n\nG90\nG1 Z5 F1200\nG1 X270 Y-0.5 F60000\nG28.140 S0 ; cali pre-extrude z pos\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} A\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n M500\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\nG29.9\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\n M500\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\nM400\n;M73 P99\n\nM1002 gcode_claim_action : 0\nM400\n\n;============switch again==================\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM620 S[initial_no_support_extruder]A\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_extruder]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single] \nM190 S[bed_temperature_initial_layer_single] \n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n ;==== set ext toodhead cooling fan ==== \n {if (min_vitrification_temperature <= 50)}\n M106 P9 S255\n {endif}\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n {if nozzle_diameter[initial_no_support_extruder] == 0.2}\n G29.1 Z{-0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n {else}\n {if nozzle_diameter[initial_no_support_extruder] == 0.2}\n G29.1 Z{0.01} ; for Textured PEI Plate\n {endif}\n {endif}\n \nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation \nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14 R0\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n M83\n{if (filament_type[initial_no_support_extruder] == \"TPU\")}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n{endif}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n G1 X290 E10 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")\n || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_extruder] W1 ;enable ams air printing detect\n\nM211 Z1\nG29.99\n\n\n", - "machine_end_gcode": ";========== H2D end ==========\n;===== date: 2025/12/26 =====\n\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nM400\nM211 Z1\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P9 S0 ; turn off ext toodhead cooling fan\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (100.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 100.0 - max_layer_z/2) < 320}\n G1 Z{max_layer_z + 100.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 98.0 - max_layer_z/2}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 320}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P6 S255\nM400 S180\nM106 P6 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S127\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n", - "layer_change_gcode": ";======== H2D 20250710 layer_change ========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", - "time_lapse_gcode": ";======== H2D 20260612========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n {if !spiral_mode}\n M993 A2 B2 C2\n M993 A0 B0 C0\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M622.1 S0 ; for prev firmware, default turn off\n M1002 set_flag smooth_safe_pos_suppoprt_flag=1\n M1002 judge_flag smooth_safe_pos_suppoprt_flag\n \n M622 J0\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && timelapse_type == 0 && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} X{timelapse_pos_x} Y{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n\n M622 J1\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n {endif}\n \n {if !spiral_mode}\n M993 A3 B3 C3\n {endif}\nM623\n; SKIPPABLE_END\n", - "wrapping_detection_gcode": ";======== H2D 20250729 clumping ========\n{if !spiral_mode}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y295 F30000\n G1 Y265 F18000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}\n", - "change_filament_gcode": ";======== H2D ========\n;===== 20260116 =====\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_extruder]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_extruder] == \"PLA\") || (filament_type[current_extruder] == \"PLA-CF\") || (filament_type[current_extruder] == \"PETG\")) && (nozzle_diameter[current_extruder] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_extruder]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG\")) && (nozzle_diameter[next_extruder] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_extruder] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_extruder] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_extruder] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_extruder] R0\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_extruder]}\n\nM628 S1\n{if filament_type[current_extruder] == \"TPU\"}\nM620.11 S0 L0 I[current_extruder] E-{retraction_distances_when_cut[current_extruder]} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\n{if (filament_type[current_extruder] == \"PA\") || (filament_type[current_extruder] == \"PA-GF\")}\nM620.11 S1 L0 I[current_extruder] R4 D2 E-{retraction_distances_when_cut[current_extruder]} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 S1 L0 I[current_extruder] R10 D8 E-{retraction_distances_when_cut[current_extruder]} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{endif}\n{endif}\nM629\n\n{if (filament_type[current_extruder] == \"TPU\" || filament_type[next_extruder] == \"TPU\") && (old_extruder_variant != \"Direct Drive TPU High Flow\")}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\n{if (old_extruder_variant == \"Direct Drive TPU High Flow\") && (filament_map[current_extruder] == 2) && (filament_map[next_extruder] == 1)}\n;debug log pe:{previous_extruder} ce:{current_extruder} ne:{next_extruder} oev: {old_extruder_variant} nev:{new_extruder_variant}\n;debug fm-curr:{filament_map[current_extruder]} fm-next:{filament_map[next_extruder]}\n;sw from R2L&TPU kit, travel run a distance for sketch TPU\nG1 X30 Y30 F5000\nM400\nG1 X300 Y30 F5000\nM400\n{endif}\n\nT[next_extruder]\n\n;deretract\n{if filament_type[next_extruder] == \"TPU\"}\n{else}\n{if (filament_type[next_extruder] == \"PA\") || (filament_type[next_extruder] == \"PA-GF\")}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_extruder]}\n\nM400\nM83\n{if next_extruder < 255}\n\nM620.10 R{new_extruder_retracted_length}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4 R{new_extruder_retracted_length}\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0", + "printer_variant": "0.4", "deretraction_speed": [ "30", "30", "30", "30", + "30", + "30", "30" ], "deretract_speed_extruder_change": [ @@ -142,22 +26,64 @@ "15", "15", "15", + "15", + "15", "15" ], + "extruder_clearance_height_to_lid": "201", + "extruder_clearance_height_to_rod": "47.4", + "extruder_clearance_max_radius": "96", + "extruder_clearance_dist_to_rod": "50", + "enable_long_retraction_when_cut": [ + "2" + ], + "enable_pre_heating": "1", + "extruder_height_gap": "5", + "extruder_printable_area": [ + "0x0,325x0,325x320,0x320", + "25x0,350x0,350x320,25x320" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive E3D High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive TPU High Flow,Direct Drive E3D High Flow" + ], + "fan_direction": "left", "hotend_cooling_rate": [ "2", "2", "2", "2", + "2", + "2", "2" ], + "hotend_heating_rate": [ + "3.6", + "3.6", + "3.6", + "3.6", + "3.6", + "3.6", + "3.6" + ], + "include": [ + "Bambu Lab H2D 0.4 nozzle template machine_start_gcode", + "Bambu Lab H2D 0.4 nozzle template machine_end_gcode", + "Bambu Lab H2D 0.4 nozzle template layer_change_gcode", + "Bambu Lab H2D 0.4 nozzle template time_lapse_gcode", + "Bambu Lab H2D 0.4 nozzle template wrapping_detection_gcode", + "Bambu Lab H2D 0.4 nozzle template change_filament_gcode" + ], "long_retractions_when_cut": [ "0", "0", "0", "0", + "0", + "0", "0" ], + "machine_load_filament_time": "26", "machine_max_acceleration_e": [ "5000", "5000", @@ -168,6 +94,10 @@ "5000", "5000", "5000", + "5000", + "5000", + "5000", + "5000", "5000" ], "machine_max_acceleration_extruding": [ @@ -180,6 +110,10 @@ "20000", "20000", "20000", + "20000", + "20000", + "20000", + "20000", "20000" ], "machine_max_acceleration_retracting": [ @@ -192,20 +126,12 @@ "5000", "5000", "5000", + "5000", + "5000", + "5000", + "5000", "5000" ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000" - ], "machine_max_acceleration_x": [ "20000", "20000", @@ -216,6 +142,10 @@ "20000", "20000", "20000", + "20000", + "20000", + "20000", + "20000", "20000" ], "machine_max_acceleration_y": [ @@ -228,6 +158,10 @@ "20000", "20000", "20000", + "20000", + "20000", + "20000", + "20000", "20000" ], "machine_max_acceleration_z": [ @@ -240,6 +174,10 @@ "500", "500", "500", + "500", + "500", + "500", + "500", "500" ], "machine_max_jerk_e": [ @@ -252,6 +190,10 @@ "2.5", "2.5", "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5" ], "machine_max_jerk_x": [ @@ -264,6 +206,10 @@ "9", "9", "9", + "9", + "9", + "9", + "9", "9" ], "machine_max_jerk_y": [ @@ -276,6 +222,10 @@ "9", "9", "9", + "9", + "9", + "9", + "9", "9" ], "machine_max_jerk_z": [ @@ -288,25 +238,124 @@ "3", "3", "3", + "3", + "3", + "3", + "3", "3" ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "machine_switch_extruder_time": "5.6", + "machine_unload_filament_time": "26", + "master_extruder_id": "2", + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], "nozzle_flush_dataset": [ "1", "2", + "2", "1", "2", + "2", "2" ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel" + "nozzle_volume": [ + "130", + "133", + "133", + "145", + "148", + "148", + "148" + ], + "printable_area": [ + "0x0", + "350x0", + "350x320", + "0x320" ], "printer_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -314,15 +363,19 @@ "printer_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], "retract_before_wipe": [ "0%", "0%", "0%", "0%", + "0%", + "0%", "0%" ], "retract_length_toolchange": [ @@ -330,20 +383,17 @@ "2", "2", "2", + "2", + "2", "2" ], - "retract_lift_above": [ - "0", - "0", - "0", - "0", - "0" - ], "retract_restart_extra": [ "0", "0", "0", "0", + "0", + "0", "0" ], "retract_restart_extra_toolchange": [ @@ -351,6 +401,8 @@ "0", "0", "0", + "0", + "0", "0" ], "retract_when_changing_layer": [ @@ -358,13 +410,26 @@ "1", "1", "1", + "1", + "1", "1" ], + "retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10", + "10", + "10" + ], "retraction_length": [ "0.8", "0.8", "0.8", "0.8", + "0.8", + "0.8", "0.8" ], "retraction_minimum_travel": [ @@ -372,6 +437,8 @@ "1", "1", "1", + "1", + "1", "1" ], "retraction_speed": [ @@ -379,20 +446,53 @@ "30", "30", "30", + "30", + "30", "30" ], + "retract_lift_above": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319", + "319", + "319", + "319" + ], + "support_cooling_filter": "1", + "support_chamber_temp_control": "1", + "support_object_skip_flush": "0", "wipe": [ "1", "1", "1", "1", + "1", + "1", "1" ], + "wrapping_exclude_area": [ + "145x310", + "256x310", + "256x326", + "145x326" + ], "wipe_distance": [ "2", "2", "2", "2", + "2", + "2", "2" ], "z_hop": [ @@ -400,6 +500,8 @@ "0.4", "0.4", "0.4", + "0.4", + "0.4", "0.4" ], "z_hop_types": [ @@ -407,10 +509,11 @@ "Auto Lift", "Auto Lift", "Auto Lift", + "Auto Lift", + "Auto Lift", "Auto Lift" ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow", - "Direct Drive Standard,Direct Drive High Flow,Direct Drive TPU High Flow" + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json index 164b2a606c..3b45d9a6e7 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.6 nozzle.json @@ -1,36 +1,38 @@ { - "type": "machine", - "name": "Bambu Lab H2D 0.6 nozzle", - "inherits": "Bambu Lab H2D 0.4 nozzle", - "from": "system", - "setting_id": "GM035", - "instantiation": "true", - "nozzle_diameter": [ - "0.6", - "0.6" - ], - "printer_model": "Bambu Lab H2D", - "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2D 0.6 nozzle" - ], - "default_print_profile": "0.30mm Standard @BBL H2D 0.6 nozzle", - "max_layer_height": [ - "0.42", - "0.42" - ], - "min_layer_height": [ - "0.12", - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4", - "1.4", - "1.4", - "1.4" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab H2D 0.6 nozzle", + "inherits": "Bambu Lab H2D 0.4 nozzle", + "from": "system", + "setting_id": "GM035", + "instantiation": "true", + "nozzle_diameter": [ + "0.6", + "0.6" + ], + "printer_model": "Bambu Lab H2D", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2D 0.6 nozzle" + ], + "default_print_profile": "0.30mm Standard @BBL H2D 0.6 nozzle", + "max_layer_height": [ + "0.42", + "0.42" + ], + "min_layer_height": [ + "0.12", + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4", + "1.4", + "1.4", + "1.4", + "1.4", + "1.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json index acae75a038..c5350f5c19 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D 0.8 nozzle.json @@ -1,333 +1,327 @@ { - "type": "machine", - "name": "Bambu Lab H2D 0.8 nozzle", - "inherits": "Bambu Lab H2D 0.4 nozzle", - "from": "system", - "setting_id": "GM036", - "instantiation": "true", - "nozzle_diameter": [ - "0.8", - "0.8" - ], - "printer_model": "Bambu Lab H2D", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2D 0.8 nozzle" - ], - "default_print_profile": "0.40mm Standard @BBL H2D 0.8 nozzle", - "max_layer_height": [ - "0.56", - "0.56" - ], - "min_layer_height": [ - "0.16", - "0.16" - ], - "retraction_length": [ - "3", - "3", - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ], - "deretraction_speed": [ - "30", - "30", - "30", - "30" - ], - "deretract_speed_extruder_change": [ - "15", - "15", - "15", - "15" - ], - "hotend_cooling_rate": [ - "2", - "2", - "2", - "2" - ], - "hotend_heating_rate": [ - "3.6", - "3.6", - "3.6", - "3.6" - ], - "long_retractions_when_cut": [ - "0", - "0", - "0", - "0" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "500", - "500", - "500", - "500", - "500", - "500", - "500" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3", - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_z": [ - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30" - ], - "nozzle_flush_dataset": [ - "1", - "2", - "1", - "2" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel" - ], - "nozzle_volume": [ - "130", - "133", - "145", - "148" - ], - "printer_extruder_id": [ - "1", - "1", - "2", - "2" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%", - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2", - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0", - "0", - "0" - ], - "retract_lift_below": [ - "319", - "319", - "319", - "319" - ], - "retract_restart_extra": [ - "0", - "0", - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0", - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1", - "1", - "1" - ], - "retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "retraction_minimum_travel": [ - "1", - "1", - "1", - "1" - ], - "retraction_speed": [ - "30", - "30", - "30", - "30" - ], - "wipe": [ - "1", - "1", - "1", - "1" - ], - "wipe_distance": [ - "2", - "2", - "2", - "2" - ], - "z_hop": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift", - "Auto Lift", - "Auto Lift" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow", - "Direct Drive Standard,Direct Drive High Flow" - ] -} + "type": "machine", + "name": "Bambu Lab H2D 0.8 nozzle", + "inherits": "Bambu Lab H2D 0.4 nozzle", + "from": "system", + "setting_id": "GM036", + "instantiation": "true", + "nozzle_diameter": [ + "0.8", + "0.8" + ], + "printer_model": "Bambu Lab H2D", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2D 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL H2D 0.8 nozzle", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], + "hotend_cooling_rate": [ + "2", + "2", + "2", + "2" + ], + "hotend_heating_rate": [ + "3.6", + "3.6", + "3.6", + "3.6" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "max_layer_height": [ + "0.56", + "0.56" + ], + "min_layer_height": [ + "0.16", + "0.16" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "nozzle_volume": [ + "130", + "133", + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "retraction_length": [ + "3", + "3", + "3", + "3" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json index 2a5830740f..91172e21ee 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.2 nozzle.json @@ -1,327 +1,327 @@ { - "type": "machine", - "name": "Bambu Lab H2D Pro 0.2 nozzle", - "inherits": "Bambu Lab H2D Pro 0.4 nozzle", - "from": "system", - "setting_id": "GM052", - "instantiation": "true", - "nozzle_diameter": [ - "0.2", - "0.2" - ], - "printer_model": "Bambu Lab H2D Pro", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2DP 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL H2DP 0.2 nozzle", - "max_layer_height": [ - "0.14", - "0.14" - ], - "min_layer_height": [ - "0.04", - "0.04" - ], - "retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.2 nozzle" - ], - "deretraction_speed": [ - "30", - "30", - "30", - "30" - ], - "hotend_cooling_rate": [ - "2", - "2", - "2", - "2" - ], - "hotend_heating_rate": [ - "3.6", - "3.6", - "3.6", - "3.6" - ], - "long_retractions_when_cut": [ - "0", - "0", - "0", - "0" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "500", - "500", - "500", - "500", - "500", - "500", - "500" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3", - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_z": [ - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30" - ], - "nozzle_flush_dataset": [ - "1", - "2", - "1", - "2" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel" - ], - "nozzle_volume": [ - "130", - "133", - "145", - "148" - ], - "printer_extruder_id": [ - "1", - "1", - "2", - "2" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%", - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2", - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0", - "0", - "0" - ], - "retract_lift_below": [ - "319", - "319", - "319", - "319" - ], - "retract_restart_extra": [ - "0", - "0", - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0", - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1", - "1", - "1" - ], - "retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "retraction_minimum_travel": [ - "1", - "1", - "1", - "1" - ], - "retraction_speed": [ - "30", - "30", - "30", - "30" - ], - "wipe": [ - "1", - "1", - "1", - "1" - ], - "wipe_distance": [ - "2", - "2", - "2", - "2" - ], - "z_hop": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift", - "Auto Lift", - "Auto Lift" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow", - "Direct Drive Standard,Direct Drive High Flow" - ] -} + "type": "machine", + "name": "Bambu Lab H2D Pro 0.2 nozzle", + "inherits": "Bambu Lab H2D Pro 0.4 nozzle", + "from": "system", + "setting_id": "GM052", + "instantiation": "true", + "nozzle_diameter": [ + "0.2", + "0.2" + ], + "printer_model": "Bambu Lab H2D Pro", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2DP 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL H2DP 0.2 nozzle", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], + "hotend_cooling_rate": [ + "2", + "2", + "2", + "2" + ], + "hotend_heating_rate": [ + "3.6", + "3.6", + "3.6", + "3.6" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "max_layer_height": [ + "0.14", + "0.14" + ], + "min_layer_height": [ + "0.04", + "0.04" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "nozzle_volume": [ + "130", + "133", + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "retraction_length": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..88aae84286 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D Pro 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";======== H2D Pro filament ========\n;===== 20260115 =====\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_filament_id]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_filament_id] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_filament_id] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] R0\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\nM628 S1\n{if filament_type[current_filament_id] == \"TPU\"}\nM620.11 S0 L0 I[current_filament_id] E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\n{if (filament_type[current_filament_id] == \"PA\") || (filament_type[current_filament_id] == \"PA-GF\")}\nM620.11 S1 L0 I[current_filament_id] R4 D2 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 S1 L0 I[current_filament_id] R10 D8 E-{retraction_distances_when_cut[current_filament_id]} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{endif}\n{endif}\nM629\n\n{if (filament_type[current_filament_id] == \"TPU\" || filament_type[next_filament_id] == \"TPU\") && (nozzle_volume_types[current_nozzle_id] != \"TPU High Flow\")}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\n{if (filament_type[current_filament_id] == \"TPU\") && (filament_map[current_filament_id] == 2) && (nozzle_volume_types[current_nozzle_id] != \"TPU High Flow\")}\n;sw from R2L&TPU kit, travel run a distance for sketch TPU\nG1 X30 Y30 F5000\nM400\nG1 X300 Y30 F5000\nM400\n{endif}\n\nT[next_filament_id]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if (filament_type[next_filament_id] == \"PA\") || (filament_type[next_filament_id] == \"PA-GF\")}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\n\nM620.10 R{new_extruder_retracted_length}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_filament_id]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{new_extruder_retracted_length}\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_filament_id] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..f330c2a364 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D Pro 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": ";======== H2D Pro 20250725 layer_change ========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..350e7676ca --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D Pro 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";======== H2D Pro end ========\n;===== date: 2026/07/29 =====\n\nM1003 S0\nM73 P100 R0\n\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P9 S0 ; turn off ext toodhead cooling fan\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (100.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 100.0 - max_layer_z/2) < 320}\n G1 Z{max_layer_z + 100.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 98.0 - max_layer_z/2}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 320}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P6 S255\nM400 S180\nM106 P6 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S127\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..9d28e066d2 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D Pro 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: H2D Pro start ======\n;===== date: 20260605 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\nM960 S10 P1 ; ext fan led\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99\nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99\nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99\nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM1002 set_gcode_claim_speed_level 5 ;Reset speed level\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1\nM901 D4\nM481 S0 ; turn off cutter pos comp\nG28.140 D0; reset pre-extrude z pos\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z42 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ====\n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n {if(cooling_filter_enabled)}\n M145.2 P0 F0\n {else}\n M145.2 P0 F1\n {endif}\n{endif}\n\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\n\nM1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nM972 S41 P0 T5000 ; trash can anti-collision\n\nM1009 Q1 L1\nG91\nG380 S2 Z30 F1200 ; lower heatbed to move toolhead\nG90\nG1 X175 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n ;M1002 gcode_claim_action : 11 ; Indentifying build plate type\n M972 S19 P0 C0 ; heatbed presence detection\n M972 S31 P0 T5000 ; toolhead camera dirty detection\n ;M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 T5000 ; heatbed plate offset detection\nM623\n\nM1002 gcode_claim_action : 72 ; Hotend Type Detection\nT1001\nM972 S14 P0 T5000 ; nozzle type detection\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\nG151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n\n{if max_print_z >= 145}\nM1002 gcode_claim_action : 75 ; Heatbed underside foreign object detection\nG3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n{endif}\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60*0.8} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\nM620.11 P0 I[initial_no_support_filament_id] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_filament_id] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_filament_id] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_filament_id] E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_filament_id] == \"PA\") || (filament_type[initial_no_support_filament_id] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_filament_id] R4 D2 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_filament_id] R10 D8 E-{retraction_distances_when_cut[initial_no_support_filament_id]} F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_filament_id]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_filament_id]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM621 S[initial_no_support_filament_id]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_filament_id] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M109 S{nozzle_temperature[initial_no_support_filament_id]} ; wait tmpr to extrude\n M83\n {if(nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8)}\n G1 E60 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {else}\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n {endif}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X175 Y160 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n M400\nM623\n\nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\nM623\n\nM622 J0\n G28 R\nM623\n\n;===== bed leveling end ================================\n\n;===== z ofst cali start =====\n\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n\n G383 O0 M2 T140\n\n;===== z ofst cali end =====\n\nG39.1 ; cali nozzle wrapped detection pos\n\nG90\nG1 Z5 F1200\nG1 X270 Y-0.5 F60000\nG28.140 S0 ; cali pre-extrude z pos\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} A\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\nG29.9\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\nM400\n;M73 P99\n\nM1002 gcode_claim_action : 0\nM400\n\n;============switch again==================\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\nM620 S[initial_no_support_filament_id]A\nM400\nT[initial_no_support_filament_id]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_filament_id]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single]\nM190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n ;==== set ext toodhead cooling fan ====\n {if (min_vitrification_temperature <= 50)}\n M106 P9 S255\n {endif}\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{-0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n {else}\n {if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2}\n G29.1 Z{0.01}\n {endif}\n {endif}\n\nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation\nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14 R0\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M83\n{if nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.8}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n{endif}\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G1 X290 E10 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] W1 ;enable ams air printing detect\n\nM211 Z1\nG29.99\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..52e9c65a12 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D Pro 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";======== H2D Pro 20260731========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n {if !spiral_mode && !timelapse_inline_photo}\n M993 A2 B2 C2\n M993 A0 B0 C0\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M622.1 S0 ; for prev firmware, default turn off\n M1002 set_flag smooth_safe_pos_suppoprt_flag=1\n M1002 judge_flag smooth_safe_pos_suppoprt_flag\n \n M622 J0\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && timelapse_type == 0 && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} X{timelapse_pos_x} Y{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n\n M622 J1\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n {endif}\n \n {if !spiral_mode && !timelapse_inline_photo}\n M993 A3 B3 C3\n {endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template wrapping_detection_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template wrapping_detection_gcode.json new file mode 100644 index 0000000000..c44fb1da14 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle template wrapping_detection_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2D Pro 0.4 nozzle template wrapping_detection_gcode", + "instantiation": "false", + "wrapping_detection_gcode": ";======== H2D Pro 20250806 clumping ========\n{if !spiral_mode}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y295 F30000\n G1 Y265 F18000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json index 842461e4d6..1b2565e73a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.4 nozzle.json @@ -10,129 +10,12 @@ "0.4" ], "printer_model": "Bambu Lab H2D Pro", + "farthest_point_timelapse": "1", "printer_variant": "0.4", "default_filament_profile": [ "Bambu PLA Basic @BBL H2DP" ], "default_print_profile": "0.20mm Standard @BBL H2DP", - "enable_long_retraction_when_cut": [ - "2" - ], - "enable_pre_heating": "1", - "extruder_clearance_dist_to_rod": "50", - "extruder_clearance_height_to_lid": "201", - "extruder_clearance_height_to_rod": "47.4", - "extruder_clearance_max_radius": "96", - "extruder_printable_area": [ - "0x0,325x0,325x320,0x320", - "25x0,350x0,350x320,25x320" - ], - "fan_direction": "left", - "hotend_heating_rate": [ - "3.6", - "3.6", - "3.6", - "3.6", - "3.6" - ], - "machine_load_filament_time": "30", - "machine_max_speed_e": [ - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_z": [ - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30" - ], - "machine_switch_extruder_time": "5.6", - "machine_unload_filament_time": "30", - "master_extruder_id": "2", - "nozzle_volume": [ - "130", - "133", - "145", - "148", - "148" - ], - "printable_area": [ - "0x0", - "350x0", - "350x320", - "0x320" - ], - "retract_lift_below": [ - "319", - "319", - "319", - "319", - "319" - ], - "retraction_distances_when_cut": [ - "10", - "10", - "10", - "10", - "10" - ], - "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "support_cooling_filter": "1", - "support_object_skip_flush": "1", - "wrapping_exclude_area": [ - "145x310", - "256x310", - "256x326", - "145x326" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: H2D Pro start ======\n;===== date: 20251104 =====================\n\n;M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\nM960 S10 P1 ; ext fan led\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM1002 set_gcode_claim_speed_level 5 ;Reset speed level\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z27 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140 A\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\n\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\n\nM972 S41 P0 T5000 ; trash can anti-collision\n\nM1009 Q1 L1\nG90\nG1 X175 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\n T1001\n \n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80} A ; rise temp in advance\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n M972 S19 P0 C0 ; heatbed presence detection\n M972 S31 P0 T5000 ; toolhead camera dirty detection\n M972 S34 P0 T5000 ; heatbed plate offset detection\nM623\n\n M972 S14 P0 ; nozzle type detection\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\n{if ((filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG\")) && (nozzle_diameter[initial_no_support_extruder] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60*0.8} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60*0.8} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{endif}\n\nM620.11 P0 I[initial_no_support_extruder] E0\n\n{if long_retraction_when_ec }\nM620.11 K1 I[initial_no_support_extruder] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[initial_no_support_extruder] R0\n{endif}\n\nM628 S1\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n M620.11 S0 L0 I[initial_no_support_extruder] E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n{if (filament_type[initial_no_support_extruder] == \"PA\") || (filament_type[initial_no_support_extruder] == \"PA-GF\")}\n M620.11 S1 L0 I[initial_no_support_extruder] R4 D2 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{else}\n M620.11 S1 L0 I[initial_no_support_extruder] R10 D8 E-{retraction_distances_when_cut[initial_no_support_extruder]} F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60}\n{endif}\n{endif}\nM629\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M109 S{nozzle_temperature[initial_no_support_extruder]} ; wait tmpr to extrude\n M83\n {if(nozzle_diameter == 0.8)}\n G1 E60 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n {else}\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n {endif}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140 A\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X175 Y160 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n \nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M500 ; save cali data\nM623\n\nM622 J0\n G28\nM623\n\n;===== bed leveling end ================================\n\n;===== z ofst cali start =====\n\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n\n G383 O0 M2 T140\n M500\n\n;===== z ofst cali end =====\n\nG39.1 ; cali nozzle wrapped detection pos\nM500\n\nM400\n;M73 P99\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} A\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n M500\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\nG29.9\n\n;===== xy ofst cali start =====\n\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\n M500\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : first_filaments[0])}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : first_filaments[1])}\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_extruder]} L{initial_no_support_extruder}\n M500\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\nM400\n;M73 P99\n\nM1002 gcode_claim_action : 0\nM400\n\n;============switch again==================\n\nM211 X0 Y0 Z0 ;turn off soft endstop\nG91\nG1 Z6 F1200\nG90\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM620 S[initial_no_support_extruder]A\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM621 S[initial_no_support_extruder]A\n\n;============switch again==================\n\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single] \nM190 S[bed_temperature_initial_layer_single] \n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n ;==== set ext toodhead cooling fan ==== \n {if (min_vitrification_temperature <= 50)}\n M106 P9 S255\n {endif}\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {endif}\n \nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation \nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n M83\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G1 X290 E20 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n{if (filament_type[initial_no_support_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")\n || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_extruder] W1 ;enable ams air printing detect\n\nM211 Z1\nG29.99\n\n\n", - "machine_end_gcode": ";======== H2D Pro end ========\n;===== date: 2025/11/11 =====\n\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nM400\nM211 Z1\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nG90\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P9 S0 ; turn off ext toodhead cooling fan\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nM620 S65279\nT65279\nG150.2\nM621 S65279\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (100.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 100.0 - max_layer_z/2) < 320}\n G1 Z{max_layer_z + 100.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 98.0 - max_layer_z/2}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 320}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z320 F600\n G1 Z320\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n", - "layer_change_gcode": ";======== H2D Pro 20250725 layer_change ========\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", - "time_lapse_gcode": ";======== H2D Pro 20260612========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n {if !spiral_mode}\n M993 A2 B2 C2\n M993 A0 B0 C0\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M622.1 S0 ; for prev firmware, default turn off\n M1002 set_flag smooth_safe_pos_suppoprt_flag=1\n M1002 judge_flag smooth_safe_pos_suppoprt_flag\n \n M622 J0\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && timelapse_type == 0 && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} X{timelapse_pos_x} Y{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos && timelapse_type == 0) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n\n M622 J1\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n M83\n {endif}\n {endif}\n M623\n {endif}\n \n {if !spiral_mode}\n M993 A3 B3 C3\n {endif}\nM623\n; SKIPPABLE_END\n", - "wrapping_detection_gcode": ";======== H2D Pro 20250806 clumping ========\n{if !spiral_mode}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y295 F30000\n G1 Y265 F18000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}\n", - "change_filament_gcode": ";======== H2D Pro filament ========\n;===== 20251031 =====\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_extruder]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_extruder] == \"PLA\") || (filament_type[current_extruder] == \"PLA-CF\") || (filament_type[current_extruder] == \"PETG\")) && (nozzle_diameter[current_extruder] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_extruder]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG\")) && (nozzle_diameter[next_extruder] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P[new_filament_temp] S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_extruder] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_extruder] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_extruder] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_extruder] R0\n{endif}\n\nM628 S1\n{if filament_type[current_extruder] == \"TPU\"}\nM620.11 S0 L0 I[current_extruder] E-{retraction_distances_when_cut[current_extruder]} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\n{if (filament_type[current_extruder] == \"PA\") || (filament_type[current_extruder] == \"PA-GF\")}\nM620.11 S1 L0 I[current_extruder] R4 D2 E-{retraction_distances_when_cut[current_extruder]} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 S1 L0 I[current_extruder] R10 D8 E-{retraction_distances_when_cut[current_extruder]} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{endif}\n{endif}\nM629\n\n{if filament_type[current_extruder] == \"TPU\" || filament_type[next_extruder] == \"TPU\"}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\nT[next_extruder]\n\n;deretract\n{if filament_type[next_extruder] == \"TPU\"}\n{else}\n{if (filament_type[next_extruder] == \"PA\") || (filament_type[next_extruder] == \"PA-GF\")}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_extruder]}\n\nM400\nM83\n{if next_extruder < 255}\n\nM620.10 R{retract_length_toolchange[filament_map[next_extruder]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_extruder]-1]}\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0", "deretraction_speed": [ "30", "30", @@ -140,6 +23,31 @@ "30", "30" ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15", + "15" + ], + "extruder_clearance_height_to_lid": "201", + "extruder_clearance_height_to_rod": "47.4", + "extruder_clearance_max_radius": "96", + "extruder_clearance_dist_to_rod": "50", + "enable_long_retraction_when_cut": [ + "2" + ], + "enable_pre_heating": "1", + "extruder_height_gap": "5", + "extruder_printable_area": [ + "0x0,325x0,325x320,0x320", + "25x0,350x0,350x320,25x320" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive TPU High Flow" + ], + "fan_direction": "left", "hotend_cooling_rate": [ "2", "2", @@ -147,6 +55,21 @@ "2", "2" ], + "hotend_heating_rate": [ + "3.6", + "3.6", + "3.6", + "3.6", + "3.6" + ], + "include": [ + "Bambu Lab H2D Pro 0.4 nozzle template machine_start_gcode", + "Bambu Lab H2D Pro 0.4 nozzle template machine_end_gcode", + "Bambu Lab H2D Pro 0.4 nozzle template layer_change_gcode", + "Bambu Lab H2D Pro 0.4 nozzle template time_lapse_gcode", + "Bambu Lab H2D Pro 0.4 nozzle template wrapping_detection_gcode", + "Bambu Lab H2D Pro 0.4 nozzle template change_filament_gcode" + ], "long_retractions_when_cut": [ "0", "0", @@ -154,6 +77,7 @@ "0", "0" ], + "machine_load_filament_time": "30", "machine_max_acceleration_e": [ "5000", "5000", @@ -190,18 +114,6 @@ "5000", "5000" ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000" - ], "machine_max_acceleration_x": [ "20000", "20000", @@ -286,6 +198,69 @@ "3", "3" ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "machine_switch_extruder_time": "5.6", + "machine_unload_filament_time": "30", + "master_extruder_id": "2", + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], "nozzle_flush_dataset": [ "1", "2", @@ -293,12 +268,18 @@ "2", "2" ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel" + "nozzle_volume": [ + "130", + "133", + "145", + "148", + "148" + ], + "printable_area": [ + "0x0", + "350x0", + "350x320", + "0x320" ], "printer_extruder_id": [ "1", @@ -328,13 +309,6 @@ "2", "2" ], - "retract_lift_above": [ - "0", - "0", - "0", - "0", - "0" - ], "retract_restart_extra": [ "0", "0", @@ -356,6 +330,13 @@ "1", "1" ], + "retraction_distances_when_cut": [ + "10", + "10", + "10", + "10", + "10" + ], "retraction_length": [ "0.8", "0.8", @@ -377,6 +358,23 @@ "30", "30" ], + "retract_lift_above": [ + "0", + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319", + "319" + ], + "support_cooling_filter": "1", + "support_chamber_temp_control": "1", + "support_object_skip_flush": "0", "wipe": [ "1", "1", @@ -384,6 +382,12 @@ "1", "1" ], + "wrapping_exclude_area": [ + "145x310", + "256x310", + "256x326", + "145x326" + ], "wipe_distance": [ "2", "2", @@ -405,8 +409,7 @@ "Auto Lift", "Auto Lift" ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow", - "Direct Drive Standard,Direct Drive High Flow,Direct Drive TPU High Flow" + "upward_compatible_machine": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json index 218506fbfa..f948cd211f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.6 nozzle.json @@ -1,33 +1,36 @@ { - "type": "machine", - "name": "Bambu Lab H2D Pro 0.6 nozzle", - "inherits": "Bambu Lab H2D Pro 0.4 nozzle", - "from": "system", - "setting_id": "GM053", - "instantiation": "true", - "nozzle_diameter": [ - "0.6", - "0.6" - ], - "printer_model": "Bambu Lab H2D Pro", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL H2DP 0.6 nozzle", - "max_layer_height": [ - "0.42", - "0.42" - ], - "min_layer_height": [ - "0.12", - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4", - "1.4", - "1.4", - "1.4" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.6 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab H2D Pro 0.6 nozzle", + "inherits": "Bambu Lab H2D Pro 0.4 nozzle", + "from": "system", + "setting_id": "GM053", + "instantiation": "true", + "nozzle_diameter": [ + "0.6", + "0.6" + ], + "printer_model": "Bambu Lab H2D Pro", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2DP 0.6 nozzle" + ], + "default_print_profile": "0.30mm Standard @BBL H2DP 0.6 nozzle", + "max_layer_height": [ + "0.42", + "0.42" + ], + "min_layer_height": [ + "0.12", + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4", + "1.4", + "1.4", + "1.4" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json index 6722650b46..7b363c8cb2 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro 0.8 nozzle.json @@ -1,327 +1,327 @@ { - "type": "machine", - "name": "Bambu Lab H2D Pro 0.8 nozzle", - "inherits": "Bambu Lab H2D Pro 0.4 nozzle", - "from": "system", - "setting_id": "GM054", - "instantiation": "true", - "nozzle_diameter": [ - "0.8", - "0.8" - ], - "printer_model": "Bambu Lab H2D Pro", - "printer_variant": "0.8", - "default_print_profile": "0.40mm Standard @BBL H2DP 0.8 nozzle", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2DP 0.8 nozzle" - ], - "max_layer_height": [ - "0.56", - "0.56" - ], - "min_layer_height": [ - "0.16", - "0.16" - ], - "retraction_length": [ - "3", - "3", - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab H2D 0.8 nozzle" - ], - "deretraction_speed": [ - "30", - "30", - "30", - "30" - ], - "hotend_cooling_rate": [ - "2", - "2", - "2", - "2" - ], - "hotend_heating_rate": [ - "3.6", - "3.6", - "3.6", - "3.6" - ], - "long_retractions_when_cut": [ - "0", - "0", - "0", - "0" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "500", - "500", - "500", - "500", - "500", - "500", - "500" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9", - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3", - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "50", - "50", - "50", - "50", - "50", - "50", - "50", - "50" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_z": [ - "30", - "30", - "30", - "30", - "30", - "30", - "30", - "30" - ], - "nozzle_flush_dataset": [ - "1", - "2", - "1", - "2" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel" - ], - "nozzle_volume": [ - "130", - "133", - "145", - "148" - ], - "printer_extruder_id": [ - "1", - "1", - "2", - "2" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%", - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2", - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0", - "0", - "0" - ], - "retract_lift_below": [ - "319", - "319", - "319", - "319" - ], - "retract_restart_extra": [ - "0", - "0", - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0", - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1", - "1", - "1" - ], - "retraction_distances_when_cut": [ - "10", - "10", - "10", - "10" - ], - "retraction_minimum_travel": [ - "1", - "1", - "1", - "1" - ], - "retraction_speed": [ - "30", - "30", - "30", - "30" - ], - "wipe": [ - "1", - "1", - "1", - "1" - ], - "wipe_distance": [ - "2", - "2", - "2", - "2" - ], - "z_hop": [ - "0.4", - "0.4", - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift", - "Auto Lift", - "Auto Lift" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow", - "Direct Drive Standard,Direct Drive High Flow" - ] -} + "type": "machine", + "name": "Bambu Lab H2D Pro 0.8 nozzle", + "inherits": "Bambu Lab H2D Pro 0.4 nozzle", + "from": "system", + "setting_id": "GM054", + "instantiation": "true", + "nozzle_diameter": [ + "0.8", + "0.8" + ], + "printer_model": "Bambu Lab H2D Pro", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2DP 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL H2DP 0.8 nozzle", + "deretraction_speed": [ + "30", + "30", + "30", + "30" + ], + "deretract_speed_extruder_change": [ + "15", + "15", + "15", + "15" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Direct Drive Standard,Direct Drive High Flow" + ], + "hotend_cooling_rate": [ + "2", + "2", + "2", + "2" + ], + "hotend_heating_rate": [ + "3.6", + "3.6", + "3.6", + "3.6" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "max_layer_height": [ + "0.56", + "0.56" + ], + "min_layer_height": [ + "0.16", + "0.16" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "nozzle_volume": [ + "130", + "133", + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "10", + "10", + "10", + "10" + ], + "retraction_length": [ + "3", + "3", + "3", + "3" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_speed": [ + "30", + "30", + "30", + "30" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_below": [ + "319", + "319", + "319", + "319" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json b/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json index d2be50fe67..cacfa01b7e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D Pro.json @@ -1,15 +1,15 @@ { - "type": "machine_model", - "name": "Bambu Lab H2D Pro", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-H2D.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "image_bed_type": "o", - "not_support_bed_type": "Smooth Cool Plate;Textured Cool Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "O1E", - "default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP 0.4 nozzle;Bambu PETG Basic @BBL H2DP 0.4 nozzle;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP 0.4 nozzle;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP 0.4 nozzle;Bambu PA-CF @BBL H2DP;Bambu PLA Pure @BBL H2DP;Bambu PLA Basic @BBL H2DP 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab H2D Pro", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-H2D.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "image_bed_type": "o", + "not_support_bed_type": "Cool Plate", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "O1E", + "default_materials": "Bambu PLA Basic @BBL H2DP;Bambu PLA-CF @BBL H2DP 0.4 nozzle;Bambu PETG Basic @BBL H2DP 0.4 nozzle;Bambu ABS @BBL H2DP;Bambu PETG HF @BBL H2DP 0.4 nozzle;Bambu PLA Silk @BBL H2DP;Bambu PLA Matte @BBL H2DP;Bambu PC @BBL H2DP 0.4 nozzle;Bambu PA-CF @BBL H2DP;Bambu PLA Pure @BBL H2DP;Bambu PLA Basic @BBL H2DP 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2D.json b/resources/profiles/BBL/machine/Bambu Lab H2D.json index a264365c94..31b0cc023e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2D.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2D.json @@ -1,16 +1,16 @@ { - "type": "machine_model", - "name": "Bambu Lab H2D", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-H2D.stl", - "bed_texture": "bbl-3dp-logo.svg", - "use_rect_grid": "true", - "default_bed_type": "Textured PEI Plate", - "image_bed_type": "o", - "not_support_bed_type": "Smooth Cool Plate;Textured Cool Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "O1D", - "default_materials": "Bambu PLA Basic @BBL H2D;Bambu PLA-CF @BBL H2D 0.4 nozzle;Bambu PETG Basic @BBL H2D 0.4 nozzle;Bambu ABS @BBL H2D;Bambu PETG HF @BBL H2D 0.4 nozzle;Bambu PLA Silk @BBL H2D;Bambu PLA Matte @BBL H2D;Bambu PC @BBL H2D 0.4 nozzle;Bambu PA-CF @BBL H2D;Bambu PLA Pure @BBL H2D;Bambu PLA Basic @BBL H2D 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab H2D", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-H2D.stl", + "bed_texture": "bbl-3dp-logo.svg", + "use_rect_grid": "true", + "default_bed_type": "Textured PEI Plate", + "image_bed_type": "o", + "not_support_bed_type": "Cool Plate", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "O1D", + "default_materials": "Bambu PLA Basic @BBL H2D;Bambu PLA-CF @BBL H2D 0.4 nozzle;Bambu PETG Basic @BBL H2D 0.4 nozzle;Bambu ABS @BBL H2D;Bambu PETG HF @BBL H2D 0.4 nozzle;Bambu PLA Silk @BBL H2D;Bambu PLA Matte @BBL H2D;Bambu PC @BBL H2D 0.4 nozzle;Bambu PA-CF @BBL H2D;Bambu PLA Pure @BBL H2D;Bambu PLA Basic @BBL H2D 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.2 nozzle.json index b7e7230b50..1623e24690 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.2 nozzle.json @@ -1,27 +1,212 @@ { - "type": "machine", - "name": "Bambu Lab H2S 0.2 nozzle", - "inherits": "Bambu Lab H2S 0.4 nozzle", - "from": "system", - "setting_id": "GM038", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab H2S", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2S 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL H2S 0.2 nozzle", - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "retraction_length": [ - "0.4", - "0.4" - ] -} + "type": "machine", + "name": "Bambu Lab H2S 0.2 nozzle", + "inherits": "Bambu Lab H2S 0.4 nozzle", + "from": "system", + "setting_id": "GM038", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab H2S", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2S 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL H2S 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4" + ], + "deretraction_speed": [ + "30", + "30" + ], + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_flush_dataset": [ + "1", + "2" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "deretract_speed_extruder_change": [ + "30", + "30" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "nozzle_volume": [ + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "339", + "339" + ], + "wipe_distance": [ + "2", + "2" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..a6bf90fda6 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2S 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";===== machine: H2S filament_change =====\n;===== date: 2026/01/28 =====\n\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_extruder]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\nM620.10 A0 F{flush_volumetric_speeds[current_extruder]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P[old_filament_temp] S1\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60*0.8} L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P[new_filament_temp] S1\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_extruder] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_extruder] E0\n{endif}\n\n\n{if filament_type[current_extruder] == \"TPU\" || filament_type[next_extruder] == \"TPU\"}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_extruder]}\n\nT[next_extruder]\n\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_extruder]}\n\nM400\nM83\n{if next_extruder < 255}\n\nM620.10 R{retract_length_toolchange[filament_map[next_extruder]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\n\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_extruder]-1]}\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_extruder]-1]}\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..e46a42768e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2S 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": ";============= H2S 20250611 =============\n; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..f8b451a7b8 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2S 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";========== H2S end ==========\n;===== date: 2026/03/13 =====\n\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nG150.3\n\nM104 S0; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (100.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 100.0 - max_layer_z/2) < 340}\n G1 Z{max_layer_z + 100.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 98.0 - max_layer_z/2}\n {else}\n G1 Z340 F600\n G1 Z340\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 340}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z340 F600\n G1 Z340\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\n\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P6 S255\nM400 S180\nM106 P6 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S127\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..900c8d4520 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2S 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: H2S =========================\n;===== date: 2026/04/21 =====================\n\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM1002 set_gcode_claim_speed_level 5 ;Reset speed level\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\nG28.140 D0; reset pre-extrude z pos\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z32 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{if(cooling_filter_enabled)}\nM145.2 P0 F0\n{else}\nM145.2 P0 F1\n{endif}\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.3 F18000\nT1000 O0 ;Preventing 3D Print Misalignment After Laser Operations\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\nM1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\nM972 S41 P0 T5000; trash can anti-collision\n\nM1009 Q1 L1\nG91\nG380 S2 Z30 F1200 ; lower heatbed to move toolhead\nG90\nG1 X170 Y160 F30000\nG28 Z P0 T250\nM1009 Q1 L0\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\nM104 S0 T0 ; stop hotend heating before detection\nM562 P1 E0 B1\nM18 E\nM400 P200\nM1028 S1\n\nM1002 judge_flag build_plate_detect_flag\nM622 S1\n ;M1002 gcode_claim_action : 11 ; Indentifying build plate type\n M972 S19 P0 C0 ; heatbed detection\n \n M972 S31 P0 T5000; Toolhead camera detection\n \n ;M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 T5000; Plate offset detection\nM623\n\nM1028 S0\nM562 P1 E1 B1\nM17 D\n\n{if max_print_z >= 145}\nM1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\nG150.3\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise temp in advance\nG3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n{endif}\n\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60*0.8} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60*0.8} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n\nM620.11 P0 I[initial_no_support_extruder] E0\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M109 S{nozzle_temperature[initial_no_support_extruder]} ; wait tmpr to extrude\n M83\n {if(nozzle_diameter == 0.8)}\n G1 E60 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n {else}\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n {endif}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X275 Y300 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\nM623\n \nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\nM623\n\nM622 J0\n G28\nM623\n\n;===== bed leveling end ================================\n\nG390.1 Z; cali nozzle wrapped detection pos\n\nG90\nG1 Z5 F1200\nG1 X270 Y-0.5 F60000\nG28.140 S0 ; cali pre-extrude z pos\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\nG29.9\n\nM1002 gcode_claim_action : 0\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single] \nM190 S[bed_temperature_initial_layer_single] \n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.01} ; for Textured PEI Plate\n {endif}\n \nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation \nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14 R0\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n M83\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G1 X290 E20 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")\n || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_extruder] W1 ;enable ams air printing detect\n\nM211 Z1\nG29.99\n\n{if (filament_type[initial_no_support_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..da656213d2 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2S 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";========Date 20250925========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n\n{if timelapse_type == 0} ; timelapse without wipe tower\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\n\n G150.3 ; move to garbage can\n M400\n\n M1004 S5 P1 ; external shutter\n M400 P300\n\n M971 S11 C10 O0\n M400 P350\n\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n{endif}\nM623\n\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template wrapping_detection_gcode.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template wrapping_detection_gcode.json new file mode 100644 index 0000000000..b994e13c5f --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle template wrapping_detection_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab H2S 0.4 nozzle template wrapping_detection_gcode", + "instantiation": "false", + "wrapping_detection_gcode": ";======== H2S 20250105 clumping ========\n{if !spiral_mode}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G390\n\n G90\n G1 Y295 F30000\n G1 Y265 F15000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle.json index 0a02a254f1..a71260a9ba 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.4 nozzle.json @@ -9,123 +9,170 @@ "0.4" ], "printer_model": "Bambu Lab H2S", + "farthest_point_timelapse": "1", "printer_variant": "0.4", "bed_exclude_area": [], "default_filament_profile": [ "Bambu PLA Basic @BBL H2S" ], "default_print_profile": "0.20mm Standard @BBL H2S", + "deretract_speed_extruder_change": [ + "30", + "30", + "30" + ], "deretraction_speed": [ + "30", "30", "30" ], "enable_long_retraction_when_cut": "2", - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], "extruder_clearance_dist_to_rod": "56", "extruder_clearance_height_to_lid": "187", "extruder_clearance_height_to_rod": "33", "extruder_clearance_max_radius": "81", + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive E3D High Flow" + ], "fan_direction": "left", "hotend_cooling_rate": [ + "2", "2", "2" ], "hotend_heating_rate": [ + "2", "2", "2" ], + "include": [ + "Bambu Lab H2S 0.4 nozzle template machine_start_gcode", + "Bambu Lab H2S 0.4 nozzle template machine_end_gcode", + "Bambu Lab H2S 0.4 nozzle template time_lapse_gcode", + "Bambu Lab H2S 0.4 nozzle template change_filament_gcode", + "Bambu Lab H2S 0.4 nozzle template layer_change_gcode", + "Bambu Lab H2S 0.4 nozzle template wrapping_detection_gcode" + ], "long_retractions_when_cut": [ + "0", "0", "0" ], - "machine_max_acceleration_z": [ - "500", - "500", - "500", - "500" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_z": [ - "30", - "30", - "30", - "30" - ], - "machine_unload_filament_time": "28", "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", "5000", "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "9000", + "9000", "9000", "9000", "9000", "9000" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000", "20000", "20000" ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], "machine_max_jerk_e": [ + "2.5", + "2.5", "2.5", "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", "9", "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", "9", "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", "3", "3", "3", "3" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_z": [ + "30", + "30", "30", "30", "30", @@ -137,17 +184,16 @@ "machine_min_travel_rate": [ "0" ], - "nozzle_volume": [ - "145", - "148" - ], + "machine_unload_filament_time": "28", "nozzle_flush_dataset": [ "1", + "2", "2" ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" + "nozzle_volume": [ + "145", + "148", + "148" ], "printable_area": [ "0x0", @@ -157,79 +203,97 @@ ], "printable_height": "340", "printer_extruder_id": [ + "1", "1", "1" ], "printer_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_lift_below": [ - "339", - "339" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], "retract_before_wipe": [ + "0%", "0%", "0%" ], "retract_length_toolchange": [ + "2", "2", "2" ], "retract_lift_above": [ + "0", "0", "0" ], - "retraction_length": [ - "0.8", - "0.8" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" + "retract_lift_below": [ + "339", + "339", + "339" ], "retract_restart_extra": [ + "0", "0", "0" ], "retract_restart_extra_toolchange": [ + "0", "0", "0" ], "retract_when_changing_layer": [ + "1", "1", "1" ], "retraction_distances_when_cut": [ + "18", "18", "18" ], - "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "support_cooling_filter": "1", - "support_object_skip_flush": "1", - "wipe_distance": [ - "2", - "2" + "retraction_length": [ + "0.8", + "0.8", + "0.8" ], - "wipe": [ + "retraction_minimum_travel": [ + "1", "1", "1" ], + "retraction_speed": [ + "30", + "30", + "30" + ], + "support_chamber_temp_control": "1", + "support_cooling_filter": "1", + "support_object_skip_flush": "1", + "wipe": [ + "1", + "1", + "1" + ], + "wipe_distance": [ + "2", + "2", + "2" + ], + "wrapping_exclude_area": [ + "172.3x302", + "232.5x302", + "232.5x322", + "172.3x322" + ], "z_hop": [ + "0.4", "0.4", "0.4" ], "z_hop_types": [ + "Auto Lift", "Auto Lift", "Auto Lift" - ], - "machine_start_gcode": ";===== machine: H2S =========================\n;===== date: 2025/08/06 =====================\n\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\nM400\n;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B9 L99 C61 D9 M99 E61 F9 N99 \nM1006 A53 B9 L99 C53 D9 M99 E53 F9 N99 \nM1006 A56 B9 L99 C56 D9 M99 E56 F9 N99 \nM1006 A61 B18 L99 C61 D18 M99 E61 F18 N99 \nM1006 W\n;=====printer start sound ===================\n\n;===== reset machine status =================\nM204 S10000\nM630 S0 P0\n\nG90\nM17 D ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nG29.1 Z{+0.0} ; clear z-trim value first\nM983.1 M1 \nM901 D4\nM481 S0 ; turn off cutter pos comp\n;===== reset machine status =================\n\nM620 M ;enable remap\n\n;===== avoid end stop =================\nG91\nG380 S2 Z22 F1200\nG380 S2 Z-12 F1200\nG90\n;===== avoid end stop =================\n\n;==== set airduct mode ==== \n\n{if (overall_chamber_temperature >= 40)}\n\n M145 P1 ; set airduct mode to heating mode for heating\n M106 P2 S0 ; turn off auxiliary fan\n M106 P3 S0 ; turn off chamber fan\n\n{else}\n M145 P0 ; set airduct mode to cooling mode for cooling\n M106 P2 S178 ; turn on auxiliary fan for cooling\n M106 P3 S127 ; turn on chamber fan for cooling\n M140 S0 ; stop heatbed from heating\n\n M1002 gcode_claim_action : 29\n M191 S0 ; wait for chamber temp\n M106 P2 S0 ; turn off auxiliary fan\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S35 T40 U0.3 V0.5 W0.8 O40 ; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 T45 U0.3 V0.5 W0.8 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R35 S40 T45 U0.3 V0.5 W0.8 O45 L1 ; set third-party PETG chamber autocooling\n {else}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R35 S45 T50 U0.3 V0.5 W0.8 O50 L1 ; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R35 S50 T55 U0.3 V0.5 W0.8 O55 L1 ; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{if(cooling_filter_enabled)}\nM145.2 P0 F0\n{else}\nM145.2 P0 F1\n{endif}\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n\n M104 S140\n M140 S[bed_temperature_initial_layer_single]\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n ;===== set chamber temperature ==========\n\n;===== start to heat heatbead & hotend==========\n\n;====== cog noise reduction=================\nM982.2 S1 ; turn on cog noise reduction\n\n;===== first homing start =====\nM1002 gcode_claim_action : 13\n\nG28 X T300\n\nG150.3 F18000\nT1000 O0 ;Preventing 3D Print Misalignment After Laser Operations\n\nG150.1 F18000 ; wipe mouth to avoid filament stick to heatbed\nG150.3 F18000\nM400 P200\nM972 S24 P0 T2000\n{if curr_bed_type==\"Textured PEI Plate\"}\nM972 S26 P0 C0\n{else}\nM972 S36 P0 C0 X1\n{endif}\nM972 S35 P0 C0\nM972 S41 P0 T5000; trash can anti-collision\n\nG90\nG1 X170 Y160 F30000\n\nG28 Z P0 T250\n\n;===== first homing end =====\n\nM400\n;M73 P99\n\n;===== detection start =====\n\n \n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80} ; rise temp in advance\n\n M972 S19 P0 C0 ; heatbed detection\n\n M972 S31 P0 T5000; Toolhead camera detection\n M972 S34 P0 T5000; Plate offset detection\n;===== detection end =====\n\nM400\n;M73 P99\n\n;===== prepare print temperature and material ==========\nM400\nM211 X0 Y0 Z0 ;turn off soft endstop\nM975 S1 ; turn on input shaping\n\nG29.2 S0 ; avoid invalid abl data\n\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n\nM620.11 P0 I[initial_no_support_extruder] E0\n\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\nM1002 gcode_claim_action : 4\nM1002 set_filament_type:UNKNOWN\nM400\nT[initial_no_support_extruder]\nM400\nM628 S0\nM629\nM400\nM1002 set_filament_type:{filament_type[initial_no_support_extruder]}\nM621 S[initial_no_support_extruder]A\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nM400\nM106 P1 S0\n\nG29.2 S1\n;===== prepare print temperature and material ==========\n\nM400\n;M73 P99\n\n;===== auto extrude cali start =========================\nM975 S1\nM1002 judge_flag extrude_cali_flag\n\nM622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\nM623\n\nM622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\nM622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\nM623\n\n;===== auto extrude cali end =========================\n\n{if filament_type[initial_no_support_extruder] == \"TPU\"}\n G150.2\n G150.1\n G150.2\n G150.1\n G150.2\n G150.1\n{else}\n M106 P1 S0\n M400 S2\n M83\n G1 E45 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4053*60}\n G1 E-3 F1800\n M400 P500\n G150.2\n G150.1\n{endif}\n\nG91\nG1 Y-16 F12000 ; move away from the trash bin\nG90\n\nM400\n;M73 P99\n\n;===== wipe right nozzle start =====\n\nM1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n {if (overall_chamber_temperature >= 40)}\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder] - 80}\n {endif}\nM106 S255 ; turn on fan to cool the nozzle\n\n;===== wipe left nozzle end =====\n\nM400\n;M73 P99\n\n{if (overall_chamber_temperature >= 40)}\n M1002 gcode_claim_action : 49\n M191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\nM400\n;M73 P99\n\n;===== bed leveling ==================================\n\nM1002 judge_flag g29_before_print_flag\n\nM190 S[bed_temperature_initial_layer_single]; ensure bed temp\nM109 S140\nM106 S0 ; turn off fan , too noisy\n\nG91\nG1 Z5 F1200\nG90\nG1 X275 Y300 F30000\n\nM622 J1\n M1002 gcode_claim_action : 1\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\nM623\n \nM622 J2\n M1002 gcode_claim_action : 1\n {if has_tpu_in_first_layer}\n G29.20 A3\n G29 A1 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {else}\n G29.20 A4\n G29 A2 O X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M500 ; save cali data\nM623\n\nM622 J0\n G28\nM623\n\n;===== bed leveling end ================================\n\nM400\n;M73 P99\n\nM141 S[overall_chamber_temperature]\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n\n G90\n G1 Z5 F1200\n G1 X187 Y160 F20000\n T1000\n M400 P200\n\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n\n M970.3 Q0 A5 K0 O1\n M974 Q0 S2 P0\n\n M970.2 Q2 K0 W38 Z0.01\n M974 Q2 S2 P0\n M500\n\n M975 S1\n;===== mech mode sweep end =====\n\nM400\n;M73 P99\n\nG150.3 ; move to garbage can to wait for temp\nM1026\n\nM1002 gcode_claim_action : 0\nM400\n;M73 P99\n\n;===== wait temperature reaching the reference value =======\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise to print tmpr\n\nM140 S[bed_temperature_initial_layer_single] \nM190 S[bed_temperature_initial_layer_single] \n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off fan\n M106 P2 S0 ; turn off big fan\n\n ;============set motor current==================\n M400 S1\n\n;===== wait temperature reaching the reference value =======\n\nM400\n;M73 P99\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.01} ; for Textured PEI Plate\n {endif}\n \nG150.1\n\nM975 S1 ; turn on mech mode supression\nM983.4 S1 ; turn on deformation compensation \nG29.2 S1 ; turn on pos comp\nG29.7 S1\n\nG90\nG1 Z5 F1200\nG1 Y295 F30000\nG1 Y265 F18000\n\n;===== nozzle load line ===============================\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n G1 Z5 F1200\n G1 X270 Y-0.5 F60000\n G28.14\n G29.2 S0\n G91\n G1 Z0.8 F1200\n G90\n G1 X250 F60000\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n M83\n G1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G1 X290 E20 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\n G91\n G3 Z0.4 I1.217 J0 P1 F60000\n G90\n M83\n G29.2 S1 ; ensure z comp turn on\n;===== noozle load line end ===========================\n\nM400\n;M73 P99\n\nM993 A1 B1 C1 ; nozzle cam detection allowed.\n\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")\n || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_extruder] W1 ;enable ams air printing detect\n\nM211 Z1\nG29.99\n\n{if (filament_type[initial_no_support_extruder] == \"TPU\")}\nM1015.3 S1;enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n", - "machine_end_gcode": ";===== date: 2025/02/05 =====================\n;===== H2S =====================\nG392 S0 ;turn off nozzle clog detect\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if timelapse_type == 2}\nM991 S0 P-1 ;end timelapse immediately\n{endif}\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\n\nG90\nG150.3\n\n{if timelapse_type == 1}\nM991 S0 P-1 ;end timelapse at safe pos\n{endif}\n\nM141 S0 ; turn off chamber heating\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.2\nM621 S65535\n\nG150.3\n\nM104 S0; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 320}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z320 F600\n G1 Z320\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.4 S0 K0 ;disable air printing detect\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L99 C53 D10 M99 E53 F10 N99 \nM1006 A57 B10 L99 C57 D10 M99 E57 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L99 C48 D10 M99 E48 F10 N99 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L99 C60 D10 M99 E60 F10 N99 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n", - "time_lapse_gcode": ";========Date 20250611========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n\nM400\n\n{if timelapse_type == 0} ; timelapse without wipe tower\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\n\n G150.3 ; move to garbage can\n M400\n\n M1004 S5 P1 ; external shutter\n M400 P300\n\n M971 S11 C10 O0\n M400 P350\n\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y295 F30000\n G1 Y265 F18000\n{endif}\nM623\n\n; SKIPPABLE_END\n", - "change_filament_gcode": ";===== machine: H2S filament_change =====\n;===== date: 2025/08/14 =====\n\nM993 A2 B2 C2 ; nozzle cam detection allow status save.\nM993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K0 ;disable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620 S[next_extruder]A\nM1002 gcode_claim_action : 4\nM204 S9000\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\nM106 P2 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\nM620.10 A0 F{flush_volumetric_speeds[current_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P{nozzle_temperature[current_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P{nozzle_temperature[next_extruder]} S1\n\n{if long_retraction_when_cut}\nM620.11 P1 I[current_extruder] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 P0 I[current_extruder] E0\n{endif}\n\n\n{if filament_type[current_extruder] == \"TPU\" || filament_type[next_extruder] == \"TPU\"}\nM620.11 H2 C331\n{else}\nM620.11 H0\n{endif}\n\nT[next_extruder]\n\n\n; VFLUSH_START\n\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\n\nSYNC T{ceil(flush_length / 125) * 5}\n\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_extruder]}\n\nM400\nM83\n{if next_extruder < 255}\n\nM620.10 R{retract_length_toolchange[filament_map[next_extruder]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\n\nM629\nM400\n\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_extruder]-1]}\n\nM400\n{if wipe_avoid_perimeter}\nG1 Y320 F30000\nG1 X{wipe_avoid_pos_x} F30000\n{endif}\nG1 Y295 F30000\nG1 Y265 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n\nM993 A3 B3 C3 ; nozzle cam detection allow status restore.\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 ; disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\nM1002 gcode_claim_action : 0\n" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.6 nozzle.json index 0240681890..8b203a6579 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.6 nozzle.json @@ -1,27 +1,28 @@ { - "type": "machine", - "name": "Bambu Lab H2S 0.6 nozzle", - "inherits": "Bambu Lab H2S 0.4 nozzle", - "from": "system", - "setting_id": "GM039", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab H2S", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL H2S 0.6 nozzle", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2S 0.6 nozzle" - ], - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4" - ] -} + "type": "machine", + "name": "Bambu Lab H2S 0.6 nozzle", + "inherits": "Bambu Lab H2S 0.4 nozzle", + "from": "system", + "setting_id": "GM039", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab H2S", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL H2S 0.6 nozzle", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2S 0.6 nozzle" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4", + "1.4" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab H2S 0.8 nozzle.json index b7aedb41bc..a3d001d6aa 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2S 0.8 nozzle.json @@ -1,27 +1,212 @@ { - "type": "machine", - "name": "Bambu Lab H2S 0.8 nozzle", - "inherits": "Bambu Lab H2S 0.4 nozzle", - "from": "system", - "setting_id": "GM040", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab H2S", - "printer_variant": "0.8", - "default_print_profile": "0.40mm Standard @BBL H2S 0.8 nozzle", - "default_filament_profile": [ - "Bambu PLA Basic @BBL H2S 0.8 nozzle" - ], - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "retraction_length": [ - "3", - "3" - ] -} + "type": "machine", + "name": "Bambu Lab H2S 0.8 nozzle", + "inherits": "Bambu Lab H2S 0.4 nozzle", + "from": "system", + "setting_id": "GM040", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab H2S", + "printer_variant": "0.8", + "default_print_profile": "0.40mm Standard @BBL H2S 0.8 nozzle", + "default_filament_profile": [ + "Bambu PLA Basic @BBL H2S 0.8 nozzle" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retraction_length": [ + "3", + "3" + ], + "deretraction_speed": [ + "30", + "30" + ], + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_flush_dataset": [ + "1", + "2" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "deretract_speed_extruder_change": [ + "30", + "30" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "nozzle_volume": [ + "145", + "148" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "339", + "339" + ], + "wipe_distance": [ + "2", + "2" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "30", + "30", + "30", + "30" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab H2S.json b/resources/profiles/BBL/machine/Bambu Lab H2S.json index 2ead7abc09..3eae9e9567 100644 --- a/resources/profiles/BBL/machine/Bambu Lab H2S.json +++ b/resources/profiles/BBL/machine/Bambu Lab H2S.json @@ -1,18 +1,20 @@ { - "type": "machine_model", - "name": "Bambu Lab H2S", - "nozzle_diameter": "0.2;0.4;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-O1S.stl", - "bed_texture": "bbl-3dp-logo.svg", - "use_double_extruder_default_texture": "true", - "bottom_texture_rect": "40,-14.5,70,8", - "default_bed_type": "Textured PEI Plate", - "image_bed_type": "o", - "not_support_bed_type": "Smooth Cool Plate;Textured Cool Plate", - "right_icon_offset_bed": "10;-5", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "O1S", - "default_materials": "Bambu PLA Basic @BBL H2S;Bambu PLA Matte @BBL H2S;Bambu PLA Tough @BBL H2S;Bambu PLA Marble @BBL H2S;Bambu PLA Metal @BBL H2S;Bambu PLA Silk @BBL H2S;Bambu TPU 95A HF @BBL H2S;Bambu PETG Basic @BBL H2S;Bambu PLA Pure @BBL H2S;Bambu PLA Basic @BBL H2S 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab H2S", + "nozzle_diameter": "0.2;0.4;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-O1S.stl", + "bed_texture": "bbl-3dp-logo.svg", + "use_double_extruder_default_texture": "true", + "bottom_texture_rect": "40,-14.5,70,8", + "bottom_texture_rect_longer": "40,-14.5,260,8", + "bottom_texture_rect_longer_ignore_list": "High Temp Plate;Textured PEI Plate", + "default_bed_type": "Textured PEI Plate", + "image_bed_type": "o", + "not_support_bed_type": "Cool Plate", + "right_icon_offset_bed": "10;-5", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "O1S", + "default_materials": "Bambu PLA Basic @BBL H2S;Bambu PLA Matte @BBL H2S;Bambu PLA Tough @BBL H2S;Bambu PLA Marble @BBL H2S;Bambu PLA Metal @BBL H2S;Bambu PLA Silk @BBL H2S;Bambu TPU 95A HF @BBL H2S;Bambu PETG Basic @BBL H2S;Bambu PLA Pure @BBL H2S;Bambu PLA Basic @BBL H2S 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..df7a462624 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.2 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1S-0.2 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json index a55651cba2..eb9a546b92 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.2 nozzle.json @@ -1,218 +1,44 @@ { - "type": "machine", - "name": "Bambu Lab P1P 0.2 nozzle", - "inherits": "Bambu Lab P1P 0.4 nozzle", - "from": "system", - "setting_id": "GM010", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab P1P", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL P1P 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL P1P 0.2 nozzle", - "deretraction_speed": [ - "30", - "30" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "long_retractions_when_cut": [ - "0", - "0" - ], - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retraction_length": [ - "0.4", - "0.4" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle" - ], - "machine_start_gcode": ";===== machine: P1S-0.2 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "type": "machine", + "name": "Bambu Lab P1P 0.2 nozzle", + "inherits": "Bambu Lab P1P 0.4 nozzle", + "from": "system", + "setting_id": "GM010", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab P1P", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL P1P 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL P1P 0.2 nozzle", + "include": [ + "Bambu Lab P1P 0.2 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..325f89c9a2 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";=P1P 20251031=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..92609c5299 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..9f54de954b --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..d3fc2793b0 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1P-0.4 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..670ab7b3e5 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json index adb67848f4..aa8b12cebc 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.4 nozzle.json @@ -1,228 +1,243 @@ { - "type": "machine", - "name": "Bambu Lab P1P 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM013", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab P1P", - "printer_variant": "0.4", - "auxiliary_fan": "0", - "bed_exclude_area": [ - "0x0", - "18x0", - "18x28", - "0x28" - ], - "default_filament_profile": [ - "Bambu PLA Basic @BBL P1P" - ], - "default_print_profile": "0.20mm Standard @BBL P1P", - "deretraction_speed": [ - "30", - "30" - ], - "enable_long_retraction_when_cut": "2", - "extruder_offset": [ - "0x2" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "long_retractions_when_cut": [ - "0", - "0" - ], - "machine_unload_filament_time": "28", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_height": "4.2", - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_length": [ - "0.8", - "0.8" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: P1P-0.4 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n", - "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", - "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END\n", - "change_filament_gcode": ";=P1P 20250822=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if nozzle_temperature[previous_extruder] > 142 && next_extruder < 255}\nM104 S{nozzle_temperature[previous_extruder]}\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S{nozzle_temperature[next_extruder]}\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" + "type": "machine", + "name": "Bambu Lab P1P 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM013", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab P1P", + "farthest_point_timelapse": "1", + "printer_variant": "0.4", + "auxiliary_fan": "0", + "bed_exclude_area": [ + "0x0", + "18x0", + "18x28", + "0x28" + ], + "default_filament_profile": [ + "Bambu PLA Basic @BBL P1P" + ], + "default_print_profile": "0.20mm Standard @BBL P1P", + "deretraction_speed": [ + "30", + "30" + ], + "enable_long_retraction_when_cut": "2", + "extruder_offset": [ + "0x2" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "include": [ + "Bambu Lab P1P 0.4 nozzle template machine_start_gcode", + "Bambu Lab P1P 0.4 nozzle template machine_end_gcode", + "Bambu Lab P1P 0.4 nozzle template time_lapse_gcode", + "Bambu Lab P1P 0.4 nozzle template change_filament_gcode", + "Bambu Lab P1P 0.4 nozzle template layer_change_gcode" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "machine_unload_filament_time": "28", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ], + "machine_max_speed_x": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "nozzle_height": "4.2", + "nozzle_volume": [ + "107", + "107" + ], + "nozzle_flush_dataset": [ + "0", + "0" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "249", + "249" + ], + "retraction_length": [ + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "wipe_distance": [ + "2", + "2" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..0d92979b2e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.6 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1S-0.6 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json index 013da7a12f..a92ad68146 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.6 nozzle.json @@ -1,44 +1,48 @@ { - "type": "machine", - "name": "Bambu Lab P1P 0.6 nozzle", - "inherits": "Bambu Lab P1P 0.4 nozzle", - "from": "system", - "setting_id": "GM011", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab P1P", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL P1P 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "retraction_length": [ - "1.4", - "1.4" - ], - "retraction_minimum_travel": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "machine_start_gcode": ";===== machine: P1S-0.6 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "type": "machine", + "name": "Bambu Lab P1P 0.6 nozzle", + "inherits": "Bambu Lab P1P 0.4 nozzle", + "from": "system", + "setting_id": "GM011", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab P1P", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL P1P 0.6 nozzle", + "default_filament_profile": [ + "Bambu PLA Basic @BBL P1P 0.6 nozzle" + ], + "include": [ + "Bambu Lab P1P 0.6 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4" + ], + "retraction_minimum_travel": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..1bb4dc652f --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1P 0.8 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1S-0.8 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json index 1911e2b60a..8e4bed700c 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P 0.8 nozzle.json @@ -1,44 +1,45 @@ { - "type": "machine", - "name": "Bambu Lab P1P 0.8 nozzle", - "inherits": "Bambu Lab P1P 0.4 nozzle", - "from": "system", - "setting_id": "GM012", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab P1P", - "printer_variant": "0.8", - "default_print_profile": "0.40mm Standard @BBL P1P 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "retract_length_toolchange": [ - "3", - "3" - ], - "retraction_length": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "machine_start_gcode": ";===== machine: P1S-0.8 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "type": "machine", + "name": "Bambu Lab P1P 0.8 nozzle", + "inherits": "Bambu Lab P1P 0.4 nozzle", + "from": "system", + "setting_id": "GM012", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab P1P", + "printer_variant": "0.8", + "default_print_profile": "0.40mm Standard @BBL P1P 0.8 nozzle", + "include": [ + "Bambu Lab P1P 0.8 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3", + "3" + ], + "retraction_length": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1P.json b/resources/profiles/BBL/machine/Bambu Lab P1P.json index 7365599b1c..ce92149a61 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1P.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1P.json @@ -1,13 +1,14 @@ { - "type": "machine_model", - "name": "Bambu Lab P1P", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "C11", - "default_materials": "Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu PLA-CF @BBL P1P;Bambu PETG-CF @BBL P1P;Bambu ABS @BBL P1P;Bambu PLA Silk @BBL P1P;Bambu PAHT-CF @BBL P1P;Bambu Support For PA/PET @BBL P1P;Bambu Support For PLA @BBL P1P;Generic PLA @BBL P1P;Generic PLA High Speed @BBL P1P;Generic PETG @BBL P1P;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL P1P 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab P1P", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "support_side_panel_fan": "false", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "C11", + "default_materials": "Bambu PLA Matte @BBL P1P;Bambu PLA Basic @BBL P1P;Bambu PLA-CF @BBL P1P;Bambu PETG-CF @BBL P1P;Bambu ABS @BBL P1P;Bambu PLA Silk @BBL P1P;Bambu PAHT-CF @BBL P1P;Bambu Support For PA/PET @BBL P1P;Bambu Support For PLA @BBL P1P;Generic PLA @BBL P1P;Generic PLA High Speed @BBL P1P;Generic PETG @BBL P1P;Bambu PETG HF @BBL X1C;Bambu PLA Pure @BBL P1P;Bambu PLA Basic @BBL P1P 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..ce98968537 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.2 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1S-0.2 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json index 136fbc3a2a..36f4e4bfeb 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.2 nozzle.json @@ -1,218 +1,44 @@ { - "type": "machine", - "name": "Bambu Lab P1S 0.2 nozzle", - "inherits": "Bambu Lab P1S 0.4 nozzle", - "from": "system", - "setting_id": "GM015", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab P1S", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1C 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", - "deretraction_speed": [ - "30", - "30" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "long_retractions_when_cut": [ - "0", - "0" - ], - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retraction_length": [ - "0.4", - "0.4" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle" - ], - "machine_start_gcode": ";===== machine: P1S-0.2 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z-0.04 ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "type": "machine", + "name": "Bambu Lab P1S 0.2 nozzle", + "inherits": "Bambu Lab P1S 0.4 nozzle", + "from": "system", + "setting_id": "GM015", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab P1S", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", + "include": [ + "Bambu Lab P1S 0.2 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..cbec41ae6a --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";=P1S 20251031=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..2004d93548 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..f30a018718 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..fab3b107a4 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1S-0.4 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..fce7cdbddd --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json index e7d011aa54..960814b881 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.4 nozzle.json @@ -1,226 +1,243 @@ { - "type": "machine", - "name": "Bambu Lab P1S 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM014", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab P1S", - "printer_variant": "0.4", - "bed_exclude_area": [ - "0x0", - "18x0", - "18x28", - "0x28" - ], - "default_print_profile": "0.20mm Standard @BBL X1C", - "deretraction_speed": [ - "30", - "30" - ], - "enable_long_retraction_when_cut": "2", - "extruder_offset": [ - "0x2" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "fan_direction": "left", - "long_retractions_when_cut": [ - "0", - "0" - ], - "machine_unload_filament_time": "28", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_height": "4.2", - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_length": [ - "0.8", - "0.8" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "support_air_filtration": "1", - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: P1S-0.4 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n", - "machine_end_gcode": ";===== date: 20230428 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\n", - "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C11 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END", - "change_filament_gcode": ";=P1S 20250822=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if nozzle_temperature[previous_extruder] > 142 && next_extruder < 255}\nM104 S{nozzle_temperature[previous_extruder]}\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S{nozzle_temperature[next_extruder]}\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" + "type": "machine", + "name": "Bambu Lab P1S 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM014", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab P1S", + "farthest_point_timelapse": "1", + "printer_variant": "0.4", + "bed_exclude_area": [ + "0x0", + "18x0", + "18x28", + "0x28" + ], + "default_print_profile": "0.20mm Standard @BBL X1C", + "deretraction_speed": [ + "30", + "30" + ], + "default_filament_profile": [ + "Bambu PLA Basic @BBL P1S 0.4 nozzle" + ], + "enable_long_retraction_when_cut": "2", + "extruder_offset": [ + "0x2" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "fan_direction": "left", + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "include": [ + "Bambu Lab P1S 0.4 nozzle template machine_start_gcode", + "Bambu Lab P1S 0.4 nozzle template machine_end_gcode", + "Bambu Lab P1S 0.4 nozzle template time_lapse_gcode", + "Bambu Lab P1S 0.4 nozzle template change_filament_gcode", + "Bambu Lab P1S 0.4 nozzle template layer_change_gcode" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "machine_unload_filament_time": "28", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ], + "machine_max_speed_x": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "nozzle_height": "4.2", + "nozzle_volume": [ + "107", + "107" + ], + "nozzle_flush_dataset": [ + "0", + "0" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "249", + "249" + ], + "retraction_length": [ + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "wipe_distance": [ + "2", + "2" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..9b07c9a2b6 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.6 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1S-0.6 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json index 34e21341af..e1518a7ba4 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.6 nozzle.json @@ -1,44 +1,48 @@ { - "type": "machine", - "name": "Bambu Lab P1S 0.6 nozzle", - "inherits": "Bambu Lab P1S 0.4 nozzle", - "from": "system", - "setting_id": "GM016", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab P1S", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "retraction_length": [ - "1.4", - "1.4" - ], - "retraction_minimum_travel": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "machine_start_gcode": ";===== machine: P1S-0.6 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ;turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X18 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "type": "machine", + "name": "Bambu Lab P1S 0.6 nozzle", + "inherits": "Bambu Lab P1S 0.4 nozzle", + "from": "system", + "setting_id": "GM016", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab P1S", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", + "default_filament_profile": [ + "Bambu PLA Basic @BBL P1S 0.6 nozzle" + ], + "include": [ + "Bambu Lab P1S 0.6 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4" + ], + "retraction_minimum_travel": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..9066f0fdef --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P1S 0.8 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: P1S-0.8 ========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json index 1c78e34238..a7ee22787e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S 0.8 nozzle.json @@ -1,47 +1,48 @@ { - "type": "machine", - "name": "Bambu Lab P1S 0.8 nozzle", - "inherits": "Bambu Lab P1S 0.4 nozzle", - "from": "system", - "setting_id": "GM017", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab P1S", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1C 0.8 nozzle" - ], - "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "retract_length_toolchange": [ - "3", - "3" - ], - "retraction_length": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "machine_start_gcode": ";===== machine: P1S-0.8 ========================\n;===== date: 20250822 =====================\n;===== turn on the HB fan & MC board fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\nM710 A1 S255 ; turn on MC fan by default(P1S)\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X230 Y15\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_extruder]==\"PLA\"}\n {if (bed_temperature[initial_extruder] >50)||(bed_temperature_initial_layer[initial_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_extruder] >45)||(bed_temperature_initial_layer[initial_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n\nM104 S{nozzle_temperature_initial_layer[initial_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== fmech mode fast check============================\n\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y15 E1.500 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.500\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X18 E15\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\n" + "type": "machine", + "name": "Bambu Lab P1S 0.8 nozzle", + "inherits": "Bambu Lab P1S 0.4 nozzle", + "from": "system", + "setting_id": "GM017", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab P1S", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", + "include": [ + "Bambu Lab P1S 0.8 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3", + "3" + ], + "retraction_length": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P1S.json b/resources/profiles/BBL/machine/Bambu Lab P1S.json index 76d1a92839..48f008b02a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P1S.json +++ b/resources/profiles/BBL/machine/Bambu Lab P1S.json @@ -1,13 +1,13 @@ { - "type": "machine_model", - "name": "Bambu Lab P1S", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "C12", - "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab P1S", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "C12", + "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Pure @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.2 nozzle.json index 8b174457f9..490fb819cc 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.2 nozzle.json @@ -1,33 +1,221 @@ { - "type": "machine", - "name": "Bambu Lab P2S 0.2 nozzle", - "inherits": "Bambu Lab P2S 0.4 nozzle", - "from": "system", - "setting_id": "GM000", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab P2S", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL P2S 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL P2S 0.2 nozzle", - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "retraction_length": [ - "0.4", - "0.4" - ], - "upward_compatible_machine": [ - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab P2S 0.2 nozzle", + "inherits": "Bambu Lab P2S 0.4 nozzle", + "from": "system", + "setting_id": "GM000", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab P2S", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL P2S 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL P2S 0.2 nozzle", + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "deretraction_speed": [ + "30", + "30" + ], + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_flush_dataset": [ + "0", + "0" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "deretract_speed_extruder_change": [ + "30", + "30" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "nozzle_volume": [ + "110", + "110" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "249", + "249" + ], + "wipe_distance": [ + "2", + "2" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "10000", + "10000", + "10000", + "10000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..0cb2886e39 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P2S 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";======== P2S filament_change gcode ==========\n;===== 2026/05/15 =====\n\nM620 S[next_filament_id]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_filament_id] == 0 || z_hop_types[current_filament_id] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_filament_id] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_filament_id] E0\n{endif}\n\nM620.11 K0 I[current_filament_id] R0\n\n\nT[next_filament_id]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if filament_type[next_filament_id] == \"PA\"}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\nSYNC T{ceil(flush_length / 80) * 5}\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\n\nM629\nM400\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Y247 F30000\nG1 Y217 F18000\n\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM621 S[next_filament_id]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Y247 F30000\nG1 Y217 F18000\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[next_filament_id] W1 ;enable ams air printing detect\n\nG1 Y256 F18000\n\n{if (overall_chamber_temperature < 40)}\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[next_filament_id])}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{first_x_layer_fan_speed[next_filament_id]*255.0/100.0 };set first x_layer aux fan\n {endif}\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[next_filament_id] && additional_fan_full_speed_layer[next_filament_id] > close_additional_fan_first_x_layers[next_filament_id])}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{(first_x_layer_fan_speed[next_filament_id] + (additional_cooling_fan_speed[next_filament_id] - first_x_layer_fan_speed[next_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[next_filament_id]) / max(additional_fan_full_speed_layer[next_filament_id] - close_additional_fan_first_x_layers[next_filament_id], 1)) * 255.0/100.0}\n {endif}\n{else}\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {endif}\n{endif}\n{endif}\n\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[next_filament_id])}\n M106 P10 S{first_x_layer_fan_speed[next_filament_id]*255.0/100.0 };set first x_layer left aux fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[next_filament_id] && additional_fan_full_speed_layer[next_filament_id] > close_additional_fan_first_x_layers[next_filament_id])}\n M106 P10 S{(first_x_layer_fan_speed[next_filament_id] + (additional_cooling_fan_speed[next_filament_id] - first_x_layer_fan_speed[next_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[next_filament_id]) / max(additional_fan_full_speed_layer[next_filament_id] - close_additional_fan_first_x_layers[next_filament_id], 1)) * 255.0/100.0}\n{else}\n M106 P10 S{additional_cooling_fan_speed[next_filament_id]*255.0/100.0};set left aux fan\n{endif}\nM623\n\n;not set fan changing filament" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..a3f4757bea --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P2S 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": ";======== P2S layer_change gcode ==========\n;===== 2026/05/15 ====\n\n{if (layer_num + 1 == 1)}\n{if (overall_chamber_temperature >= 40)}\n ;not reset filter fan in first layer\n ;not reset fan\n{else}\n{if (min_vitrification_temperature > 50)}\n ;not reset filter fan in first layer\n ;not reset fan\n{endif}\n{endif}\n{endif}\n\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n {endif}\n{endif}\n M622.1 S0\n M1002 judge_flag ventobox_replace_aux1_fan_flag\n M622 J0\n M106 P10 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}; set first x_layer left aux fan\n M623\n;not reset fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[current_filament_id] && additional_fan_full_speed_layer[current_filament_id] > close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n {endif}\n{endif}\n M622.1 S0\n M1002 judge_flag ventobox_replace_aux1_fan_flag\n M622 J0\n M106 P10 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n M623\n;not reset fan\n{elsif (layer_num + 1 == max(close_additional_fan_first_x_layers[current_filament_id] + 1, additional_fan_full_speed_layer[current_filament_id]))}\n{if (overall_chamber_temperature < 40)}\n ;updata chamber autocooling in Xth layer\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n ;not reset filter fan in Xth layer\n {endif}\n{else}\n ;not reset filter fan in Xth layer\n{endif}\n M622.1 S0\n M1002 judge_flag ventobox_replace_aux1_fan_flag\n M622 J0\n M106 P10 S{additional_cooling_fan_speed[current_filament_id]*255.0/100.0}; set left aux fan\n M623\n;not reset fan\n{endif}\n\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..5ce7cb3c9f --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P2S 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";======== P2S end gcode ==========\n;===== 2026/05/18 =====\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.1 F8000\nM621 S65535\n\nG150.3\nM104 S0 ; turn off hotend\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (80.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 80.0 - max_layer_z/2) < 256}\n G1 Z{max_layer_z + 80.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 78.0 - max_layer_z/2}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 256}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.3 S0 ;disable clog detect\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P2 S255\nM400 S180\nM106 P2 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S255\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L50 C48 D10 M50 E48 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L50 C60 D10 M50 E60 F10 N50 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..a7dee998fb --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P2S 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== P2S start gcode==========\n;===== 2026/05/18 =====\n\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50\nM1006 W\n;=====printer start sound ===================\n\n M620 M ;enable remap\n G389\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n G90\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n M983.4 S0\n;===== reset machine status =================\n\n;==== set airduct mode ====\n;==== if Chamber Cooling is necessary ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S255 ; turn on filter fan\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\nM106 P10 S0 ; turn off left aux fan\nM623\n{else}\n{if (min_vitrification_temperature <= 50)}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\nM106 P10 S0 ; turn off left aux fan\nM623\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n{else}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S127 ; turn on 50% filter fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PLA/TPU exhaust chamber autocooling\n{endif}\n{endif}\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M104 S140 A\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M972 S26 P0 C0\n M972 S42 P0 T5000\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G90\n G1 X128 Y128 F30000\n G28 Z P0 T400\n M400\n;===== first homign end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A ; rise temp in advance\n M972 S19 P0 T5000 ;plate type detection\n\n {if max_print_z >= 145}\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G150.3\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} ; rise temp in advance\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\n M620.11 P0 L0 I[initial_no_support_filament_id] E0\n M620.11 K0 I[initial_no_support_filament_id] R0\n\n M620 S[initial_no_support_filament_id]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_filament_id]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M621 S[initial_no_support_filament_id]A\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n;===== prepare print temperature and material ==========\n\n\n;===== auto extrude cali start =========================\n M975 S1\n M1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n;===== auto extrude cali end =========================\n\n {if hold_chamber_temp_for_flat_print}\n M1002 gcode_claim_action : 58\n M104 S{first_layer_temperature[initial_no_support_filament_id]}\n {if bed_temperature_initial_layer_single > 89}\n M1030 S1800\n SYNC R0 T1800\n {else}\n M1030 S300\n SYNC R0 T300\n {endif}\n M1030 C\n {endif}\n\n {if filament_type[initial_filament_id] == \"TPU\" || filament_type[initial_filament_id] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n G150.2\n G150.1 F8000\n G150.2\n G150.1 F8000\n\n G91\n G1 Y-16 F12000 ; move away from the trash bin\n G90\n M400\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A\n\n;===== wipe right nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n\n{if filament_type[initial_filament_id] == \"PC\"}\n M109 S170 A\n{else}\n M109 S140 A\n{endif}\n G91\n G1 Z5 F1200\n G90\n M400\n G150.1\n;===== wipe left nozzle end =====\n\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 X128 Y128 F20000\n G1 Z5 F1200\n M400 P200\n M970.3 Q1 A5 K0 O1\n M970.2 Q1 K1 W74 Z0.01\n M974 Q1 S2 P0\n M970.3 Q0 A7 K0 O1\n M970.2 Q0 K1 W74 Z0.01\n M974 Q0 S2 P0\n M975 S1\n M400\n;===== mech mode sweep end =====\n\n;===== bed leveling ==================================\n M1002 gcode_claim_action : 54\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n M109 S140 A\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M623\n\n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M623\n\n M622 J0\n G28\n M623\n G29.2 S1\n G28\n;===== bed leveling end ================================\n\n M985.1 U0 E2\n M985.1 U1 E2\n\n M104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n M190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n\n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n\n;============switch again==================\n M211 X0 Y0 Z0 ;turn off soft endstop\n G91\n G1 Z6 F1200\n G90\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M620 S[initial_no_support_filament_id]A\n M400\n T[initial_no_support_filament_id]\n M400\n M628 S0\n M629\n M400\n M621 S[initial_no_support_filament_id]A\n;============switch again==================\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if bed_temperature_initial_layer_single > 89}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.0}\n {endif}\n {else}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.03}\n {endif}\n {endif}\n\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n G0 X100 Y0 F24000\n M400\n ;G130 O0 X100 Y-0.4 Z0.8 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E20 D5\n G130 O0 X100 Y-0.2 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E12 D4\n G90\n M83\n G1 Z1\n M400\n;===== noozle load line end ===========================\nM1002 gcode_claim_action : 0\n G29.99\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\") ||\n(filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]};enable tpu, pla and petg clog detect\n{else}\nM1015.3 S0;disable clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_filament_id] W1 ;enable ams air printing detect\n\nM1010 Q0 B0.023 S0.01\nM1010 Q1 B0.005 S0.01\nM1010.1 S1\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..4ba9426d02 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P2S 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";======== P2S timelapes gcode ==========\n;===== 2025/06/16 ====\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\n G150.3 ; move to garbage can\n M400\n M1004 S5 P1 ; external shutter\n M400 P300\n M971 S11 C10 O0\n M400 P350\n \n G90\n G1 Z{max_layer_z + 3.0} F1200\n G1 Y247 F30000\n G1 Y217 F18000\n{endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode.json new file mode 100644 index 0000000000..97ec404494 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode", + "instantiation": "false", + "wrapping_detection_gcode": ";======== P2S 20250822 clumping ========\n{if !spiral_mode}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y247 F30000\n G1 Y217 F18000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle.json index 96e9e51600..55119f44e5 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.4 nozzle.json @@ -9,6 +9,7 @@ "0.4" ], "printer_model": "Bambu Lab P2S", + "farthest_point_timelapse": "1", "printer_variant": "0.4", "bed_exclude_area": [], "default_filament_profile": [ @@ -16,10 +17,12 @@ ], "default_print_profile": "0.20mm Standard @BBL P2S", "deretraction_speed": [ + "30", "30", "30" ], "deretract_speed_extruder_change": [ + "30", "30", "30" ], @@ -32,67 +35,94 @@ "0X0" ], "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" + "Direct Drive Standard,Direct Drive High Flow,Direct Drive E3D High Flow" ], "fan_direction": "right", "hotend_cooling_rate": [ + "2", "2", "2" ], "hotend_heating_rate": [ + "2", "2", "2" ], + "include": [ + "Bambu Lab P2S 0.4 nozzle template machine_start_gcode", + "Bambu Lab P2S 0.4 nozzle template machine_end_gcode", + "Bambu Lab P2S 0.4 nozzle template layer_change_gcode", + "Bambu Lab P2S 0.4 nozzle template time_lapse_gcode", + "Bambu Lab P2S 0.4 nozzle template wrapping_detection_gcode", + "Bambu Lab P2S 0.4 nozzle template change_filament_gcode" + ], "long_retractions_when_cut": [ + "0", "0", "0" ], "machine_load_filament_time": "26", "machine_max_acceleration_travel": [ + "10000", + "10000", "10000", "10000", "10000", "10000" ], "machine_max_speed_x": [ - "600", - "600", - "600", - "600" + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" ], "machine_max_speed_y": [ - "600", - "600", - "600", - "600" + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" ], "machine_prepare_compensation_time": "370", "machine_unload_filament_time": "31", "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", "5000", "5000", "5000", "5000" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000", "20000", @@ -100,41 +130,55 @@ ], "machine_max_acceleration_z": [ "500", - "200", - "200", - "200" + "500", + "500", + "500", + "500", + "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", "2.5", "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", "9", "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", "9", "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", "3", "3", "3", "3" ], "machine_max_speed_e": [ + "30", + "30", "30", "30", "30", "30" ], "machine_max_speed_z": [ + "20", + "20", "20", "20", "20", @@ -148,78 +192,89 @@ ], "nozzle_height": "4.2", "nozzle_volume": [ + "110", "110", "110" ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], "nozzle_flush_dataset": [ + "0", "0", "0" ], "printable_height": "256", - "auxiliary_fan": "0", - "support_air_filtration": "1", "printer_extruder_id": [ + "1", "1", "1" ], "printer_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], "retract_before_wipe": [ + "0%", "0%", "0%" ], "retract_length_toolchange": [ + "2", "2", "2" ], "retract_lift_above": [ + "0", "0", "0" ], "retract_lift_below": [ + "249", "249", "249" ], "retraction_length": [ + "0.8", "0.8", "0.8" ], "retraction_minimum_travel": [ + "1", "1", "1" ], "retraction_speed": [ + "30", "30", "30" ], "retract_restart_extra": [ + "0", "0", "0" ], "retract_restart_extra_toolchange": [ + "0", "0", "0" ], "retract_when_changing_layer": [ + "1", "1", "1" ], "retraction_distances_when_cut": [ + "18", "18", "18" ], "support_object_skip_flush": "1", "wipe_distance": [ + "2", "2", "2" ], "wipe": [ + "1", "1", "1" ], @@ -230,10 +285,12 @@ "153x235" ], "z_hop": [ + "0.4", "0.4", "0.4" ], "z_hop_types": [ + "Auto Lift", "Auto Lift", "Auto Lift" ], @@ -241,12 +298,10 @@ "Bambu Lab A1 0.4 nozzle", "Bambu Lab H2S 0.4 nozzle", "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle" + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" ], - "machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== P2S start gcode==========\n;===== Based on official 2026/04/21 start gcode =====\n \n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50 \nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50 \nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50 \nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50 \nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50 \nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50 \nM1006 W\n;=====printer start sound ===================\n\n M620 M ;enable remap\n G389\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n G90\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M975 S1 ; turn on input shaping\n M982.2 S1 ; turn on cog noise reduction\n M983.4 S0\n;===== reset machine status =================\n\n;==== set airduct mode ==== \n;==== if Chamber Cooling is necessary ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S255 ; turn on filter fan\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\nM106 P10 S0 ; turn off left aux fan\nM623\n{else}\n{if (min_vitrification_temperature <= 50)}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\nM106 P10 S0 ; turn off left aux fan\nM623\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n{else}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S127 ; turn on 50% filter fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PLA/TPU exhaust chamber autocooling\n{endif}\n{endif}\n;==== set airduct mode ==== \n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M104 S140 A \n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M972 S26 P0 C0\n M972 S42 P0 T5000\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G90\n G1 X128 Y128 F30000\n G28 Z P0 T400\n M400\n;===== first homing end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-80} A ; rise temp in advance\n M972 S19 P0 T5000 ;plate type detection\n \n {if max_print_z >= 145}\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G150.3\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise temp in advance\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n \n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG\")) && (nozzle_diameter[initial_no_support_extruder] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} H{nozzle_diameter[initial_no_support_extruder]} T{flush_temperatures[initial_no_support_extruder]} P{nozzle_temperature_initial_layer[initial_no_support_extruder]} S1\n{endif}\n \n M620.11 P0 L0 I[initial_no_support_extruder] E0\n M620.11 K0 I[initial_no_support_extruder] R0\n \n M620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_extruder]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M621 S[initial_no_support_extruder]A\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n;===== prepare print temperature and material ==========\n\n\n;===== auto extrude cali start =========================\n M975 S1\n M1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_extruder]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n;===== auto extrude cali end =========================\n\n {if hold_chamber_temp_for_flat_print}\n M1002 gcode_claim_action : 58\n M104 S{first_layer_temperature[initial_no_support_extruder]}\n {if bed_temperature_initial_layer_single > 89}\n M1030 S1800 \n SYNC R0 T1800\n {else}\n M1030 S300\n SYNC R0 T300\n {endif}\n M1030 C\n {endif}\n \n {if filament_type[current_extruder] == \"TPU\" || filament_type[current_extruder] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n\n ; series of wipes to ensure the nozzle is as clean as possible to avoid potential z-drift issues.\n M104 S180\n G150.2\n G150.1 F8000\n G150.2\n G150.1 F8000\n M106 P1 S255\n M109 S180 A\n G150.1 F8000 \n M109 S140 A\n M106 P1 S0\n G150.1 F8000\n G91\n G1 Y-16 F12000\n G1 X100 F6000\n G90\n M400\n\n;===== wipe right nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n M400\n \n{if filament_type[current_extruder] == \"PC\"}\n M109 S170 A\n{else}\n M109 S140 A\n{endif}\n G91\n G1 Z5 F1200\n G90\n M400\n G150.1\n;===== wipe left nozzle end =====\n\n\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 X128 Y128 F20000\n G1 Z5 F1200\n M400 P200\n M970.3 Q1 A5 K0 O1\n M970.2 Q1 K1 W74 Z0.01\n M974 Q1 S2 P0\n M970.3 Q0 A7 K0 O1\n M970.2 Q0 K1 W74 Z0.01\n M974 Q0 S2 P0\n M975 S1\n M400\n;===== mech mode sweep end =====\n\n;===== bed leveling ==================================\n M1002 gcode_claim_action : 54\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n M109 S140 A\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M623\n \n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n {endif}\n M400\n M623\n\n M622 J0\n ;skip to homing\n M623\n G29.2 S1\n G28\n;===== bed leveling end ================================\n\n M985.1 U0 E2\n M985.1 U1 E2\n\n M104 S[nozzle_temperature_initial_layer] A\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n M190 S[bed_temperature_initial_layer_single] \n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n \n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n\n;============switch again==================\n M211 X0 Y0 Z0 ;turn off soft endstop\n G91\n G1 Z6 F1200\n G90\n M1002 set_filament_type:{filament_type[initial_no_support_extruder]}\n M620 S[initial_no_support_extruder]A\n M400\n T[initial_no_support_extruder]\n M400\n M628 S0\n M629\n M400\n M621 S[initial_no_support_extruder]A\n;============switch again==================\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if bed_temperature_initial_layer_single > 89}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.02} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.0}\n {endif}\n {else}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{0.01} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.03}\n {endif}\n {endif}\n\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 X100 Y0 F24000\n M400\n G130 O0 X100 Y-0.2 Z0.6 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053} L40 E12 D4\n G90\n M83\n G1 Z1\n M400\n;===== nozzle load line end ===========================\nM1002 gcode_claim_action : 0\n G29.99\n\n{if (filament_type[initial_no_support_extruder] == \"TPU\") || \n(filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")}\nM1015.3 S1 H[nozzle_diameter];enable tpu, pla and petg clog detect\n{else}\nM1015.3 S0;disable clog detect\n{endif}\n\n{if (filament_type[initial_no_support_extruder] == \"PLA\") || (filament_type[initial_no_support_extruder] == \"PETG\")\n || (filament_type[initial_no_support_extruder] == \"PLA-CF\") || (filament_type[initial_no_support_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[initial_no_support_extruder] W1 ;enable ams air printing detect\n\nM1010 Q0 B0.023 S0.01\nM1010 Q1 B0.005 S0.01\nM1010.1 S1\n", - "machine_end_gcode": ";======== P2S end gcode ==========\n;===== Based on official 2026/04/01 end gcode =====\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\n\n; pull back filament to AMS\nM620 S65535\nT65535\nG150.1 F8000\nM621 S65535\n\nG150.3\nM104 S0 ; turn off hotend\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (80.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 80.0 - max_layer_z/2) < 256}\n G1 Z{max_layer_z + 80.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 78.0 - max_layer_z/2}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 256}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.3 S0 ;disable clog detect\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\n;checks for activate_air_filtration_on_completion and parent flag. If enabled, the override fan speed will be used. Otherwise, the default air purification will kick in.\n\nM622 J1\n{if !activate_air_filtration[current_extruder] || (activate_air_filtration[current_extruder] && !activate_air_filtration_on_completion[current_extruder])}\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P2 S255\nM400 S180\nM106 P2 S0\n{endif}\nM623\n\nM622 J2\n{if !activate_air_filtration[current_extruder] || (activate_air_filtration[current_extruder] && !activate_air_filtration_on_completion[current_extruder])}\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S255\nM400 S180\nM106 P3 S0\n{endif}\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L50 C48 D10 M50 E48 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L50 C60 D10 M50 E60 F10 N50 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n", - "layer_change_gcode": ";======== P2S layer_change gcode ==========\n;===== Based on official 2026/04/08 layer change gcode =====\n\n{if (layer_num + 1 == 1)}\n{if (overall_chamber_temperature >= 40)}\n ;not reset filter fan in first layer\n ;not reset fan\n{else}\n{if (min_vitrification_temperature > 50)}\n ;not reset filter fan in first layer\n ;not reset fan\n{endif} \n{endif}\n{endif}\n\n{if (layer_num + 1 <= close_fan_the_first_x_layers[current_extruder])}\n{if (overall_chamber_temperature < 40)}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{first_x_layer_fan_speed[current_extruder]*255.0/100.0}\n {endif}\n{endif}\n M622.1 S0\n M1002 judge_flag ventobox_replace_aux1_fan_flag\n M622 J0\n M106 P10 S{first_x_layer_fan_speed[current_extruder]*255.0/100.0}; set first x_layer left aux fan \n M623\n;not reset fan\n{elsif (layer_num + 1 < full_fan_speed_layer[current_extruder] && full_fan_speed_layer[current_extruder] > close_fan_the_first_x_layers[current_extruder])}\n{if (overall_chamber_temperature < 40)}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{(first_x_layer_fan_speed[current_extruder] + (additional_cooling_fan_speed[current_extruder] - first_x_layer_fan_speed[current_extruder]) * (layer_num + 1 - close_fan_the_first_x_layers[current_extruder]) / (full_fan_speed_layer[current_extruder] - close_fan_the_first_x_layers[current_extruder])) * 255.0/100.0}\n {endif}\n{endif}\n M622.1 S0\n M1002 judge_flag ventobox_replace_aux1_fan_flag\n M622 J0\n M106 P10 S{(first_x_layer_fan_speed[current_extruder] + (additional_cooling_fan_speed[current_extruder] - first_x_layer_fan_speed[current_extruder]) * (layer_num + 1 - close_fan_the_first_x_layers[current_extruder]) / (full_fan_speed_layer[current_extruder] - close_fan_the_first_x_layers[current_extruder])) * 255.0/100.0}\n M623\n;not reset fan\n{elsif (layer_num + 1 == max(close_fan_the_first_x_layers[current_extruder] + 1, full_fan_speed_layer[current_extruder]))}\n{if (overall_chamber_temperature < 40)}\n ;updata chamber autocooling in Xth layer\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n ;not reset filter fan in Xth layer\n {endif}\n{else}\n ;not reset filter fan in Xth layer\n{endif}\n M622.1 S0\n M1002 judge_flag ventobox_replace_aux1_fan_flag\n M622 J0\n M106 P10 S{additional_cooling_fan_speed[current_extruder]*255.0/100.0}; set left aux fan \n M623\n;not reset fan\n{endif}\n\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n\n", - "time_lapse_gcode": ";======== P2S timeslape gcode ==========\n;===== 2025/06/16 ====\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\n G150.3 ; move to garbage can\n M400\n M1004 S5 P1 ; external shutter\n M400 P300\n M971 S11 C10 O0\n M400 P350\n \n G90\n G1 Z{max_layer_z + 3.0} F1200\n G0 Y210 F18000\n{endif}\nM623\n; SKIPPABLE_END\n", - "wrapping_detection_gcode": ";======== P2S 20250822 clumping ========\n{if !spiral_mode}\n M622.1 S0 ; for previous firmware, default turn off\n M1002 set_flag g39_forced_detection_flag=1\n M1002 judge_flag g39_forced_detection_flag\n M622 J1\n {if layer_num == 3 || layer_num == 10 || layer_num == 19}\n M993 A2 B2 C2 ; nozzle cam detection allow status save.\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n\n M400 P100\n\n G39\n\n G90\n G1 Y240 F30000\n G1 Y210 F15000\n \n M993 A3 B3 C3 ; nozzle cam detection allow status restore.\n {endif}\n M623\n{endif}", - "change_filament_gcode": ";======== P2S filament_change gcode ==========\n;===== Based on official 2026/04/08 filament change gcode =====\n\nM620 S[next_extruder]A\nM204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_extruder] == 0 || z_hop_types[current_extruder] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_extruder] == \"PLA\") || (filament_type[current_extruder] == \"PLA-CF\") || (filament_type[current_extruder] == \"PETG\")) && (nozzle_diameter[current_extruder] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P{nozzle_temperature[current_extruder]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[current_extruder]} T{flush_temperatures[current_extruder]} P{nozzle_temperature[current_extruder]} S1\n{endif}\n\n{if ((filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG\")) && (nozzle_diameter[next_extruder] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P{nozzle_temperature[next_extruder]} S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_extruder]/2.4053*60} L[flush_length] H{nozzle_diameter[next_extruder]} T{flush_temperatures[next_extruder]} P{nozzle_temperature[next_extruder]} S1\n{endif}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_extruder] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_extruder]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_extruder] E0\n{endif}\n\nM620.11 K0 I[current_extruder] R0\n\n \nT[next_extruder]\n\n;deretract\n{if filament_type[next_extruder] == \"TPU\"}\n{else}\n{if filament_type[next_extruder] == \"PA\"}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\nSYNC T{ceil(flush_length / 80) * 5}\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_extruder]}\n\nM400\nM83\n{if next_extruder < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_extruder]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\n\nM629\nM400\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_extruder]-1]}\nM400\n\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\nM621 S[next_extruder]A\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_extruder]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_extruder]-1]}\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\nM1002 set_flag powerloss_resume_flag=0\nM623\n\n{if (filament_type[next_extruder] == \"PLA\") || (filament_type[next_extruder] == \"PETG\")\n || (filament_type[next_extruder] == \"PLA-CF\") || (filament_type[next_extruder] == \"PETG-CF\")}\nM1015.4 S1 K1 H[nozzle_diameter] ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H[nozzle_diameter] ;disable E air printing detect\n{endif}\n\nM620.6 I[next_extruder] W1 ;enable ams air printing detect\n\nG1 Y256 F18000\n\n{if (overall_chamber_temperature < 40)}\n{if (layer_num + 1 <= close_fan_the_first_x_layers[next_extruder])}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{first_x_layer_fan_speed[next_extruder]*255.0/100.0 };set first x_layer aux fan\n {endif}\n{elsif (layer_num + 1 < full_fan_speed_layer[next_extruder] && full_fan_speed_layer[next_extruder] > close_fan_the_first_x_layers[next_extruder])}\n {if (min_vitrification_temperature <= 50)}\n M106 P2 S{(first_x_layer_fan_speed[next_extruder] + (additional_cooling_fan_speed[next_extruder] - first_x_layer_fan_speed[next_extruder]) * (layer_num + 1 - close_fan_the_first_x_layers[next_extruder]) / (full_fan_speed_layer[next_extruder] - close_fan_the_first_x_layers[next_extruder])) * 255.0/100.0}\n {endif}\n{else}\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {endif}\n{endif}\n{endif}\n\nM622.1 S0\nM1002 judge_flag ventobox_replace_aux1_fan_flag\nM622 J0\n{if (layer_num + 1 <= close_fan_the_first_x_layers[next_extruder])}\n M106 P10 S{first_x_layer_fan_speed[next_extruder]*255.0/100.0 };set first x_layer left aux fan \n{elsif (layer_num + 1 < full_fan_speed_layer[next_extruder] && full_fan_speed_layer[next_extruder] > close_fan_the_first_x_layers[next_extruder])}\n M106 P10 S{(first_x_layer_fan_speed[next_extruder] + (additional_cooling_fan_speed[next_extruder] - first_x_layer_fan_speed[next_extruder]) * (layer_num + 1 - close_fan_the_first_x_layers[next_extruder]) / (full_fan_speed_layer[next_extruder] - close_fan_the_first_x_layers[next_extruder])) * 255.0/100.0}\n{else}\n M106 P10 S{additional_cooling_fan_speed[next_extruder]*255.0/100.0};set left aux fan\n{endif}\nM623\n\n;not set fan changing filament" + "print_in_clockwise": "1" } diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.6 nozzle.json index fe42eef3f1..78764749fa 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.6 nozzle.json @@ -1,33 +1,37 @@ { - "type": "machine", - "name": "Bambu Lab P2S 0.6 nozzle", - "inherits": "Bambu Lab P2S 0.4 nozzle", - "from": "system", - "setting_id": "GM009", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab P2S", - "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL P2S 0.6 nozzle" - ], - "default_print_profile": "0.30mm Standard @BBL P2S 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4" - ], - "upward_compatible_machine": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle" - ] + "type": "machine", + "name": "Bambu Lab P2S 0.6 nozzle", + "inherits": "Bambu Lab P2S 0.4 nozzle", + "from": "system", + "setting_id": "GM009", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab P2S", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL P2S 0.6 nozzle" + ], + "default_print_profile": "0.30mm Standard @BBL P2S 0.6 nozzle", + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4", + "1.4" + ], + "upward_compatible_machine": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab P2S 0.8 nozzle.json index c154ec6105..35dd4955d8 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab P2S 0.8 nozzle.json @@ -1,37 +1,221 @@ { - "type": "machine", - "name": "Bambu Lab P2S 0.8 nozzle", - "inherits": "Bambu Lab P2S 0.4 nozzle", - "from": "system", - "setting_id": "GM018", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab P2S", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL P2S 0.8 nozzle" - ], - "default_print_profile": "0.40mm Standard @BBL P2S 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "retract_length_toolchange": [ - "3", - "3" - ], - "retraction_length": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab P2S 0.8 nozzle", + "inherits": "Bambu Lab P2S 0.4 nozzle", + "from": "system", + "setting_id": "GM018", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab P2S", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL P2S 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL P2S 0.8 nozzle", + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3", + "3" + ], + "retraction_length": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "deretraction_speed": [ + "30", + "30" + ], + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "nozzle_flush_dataset": [ + "0", + "0" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "deretract_speed_extruder_change": [ + "30", + "30" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "nozzle_volume": [ + "110", + "110" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "249", + "249" + ], + "wipe_distance": [ + "2", + "2" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "10000", + "10000", + "10000", + "10000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab P2S.json b/resources/profiles/BBL/machine/Bambu Lab P2S.json index 869cb56016..a355fc1179 100644 --- a/resources/profiles/BBL/machine/Bambu Lab P2S.json +++ b/resources/profiles/BBL/machine/Bambu Lab P2S.json @@ -1,16 +1,16 @@ { - "type": "machine_model", - "name": "Bambu Lab P2S", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "image_bed_type": "n", - "bottom_texture_end_name": "n", - "not_support_bed_type": "Smooth Cool Plate;Textured Cool Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "N7", - "default_materials": "Bambu PLA Matte @BBL P2S;Bambu PLA Basic @BBL P2S;Bambu PLA Silk @BBL P2S;Bambu PLA Marble @BBL P2S;Bambu PLA Sparkle @BBL P2S;Generic PLA @BBL P2S;Bambu TPU 95A @BBL P2S;Bambu ABS @BBL P2S;Bambu PC @BBL P2S 0.4 nozzle;Bambu PLA Basic @BBL P2S 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab P2S", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "image_bed_type": "n", + "bottom_texture_end_name": "n", + "not_support_bed_type": "Cool Plate", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "N7", + "default_materials": "Bambu PLA Matte @BBL P2S;Bambu PLA Basic @BBL P2S;Bambu PLA Silk @BBL P2S;Bambu PLA Marble @BBL P2S;Bambu PLA Sparkle @BBL P2S;Generic PLA @BBL P2S;Bambu TPU 95A @BBL P2S;Bambu ABS @BBL P2S;Bambu PC @BBL P2S 0.4 nozzle;Bambu PLA Pure @BBL P2S 0.4 nozzle;Bambu PLA Basic @BBL P2S 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..c814830f56 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 0.2 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.2 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json index 1d7363975b..0d3e449d12 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.2 nozzle.json @@ -1,218 +1,44 @@ { - "type": "machine", - "name": "Bambu Lab X1 0.2 nozzle", - "inherits": "Bambu Lab X1 0.4 nozzle", - "from": "system", - "setting_id": "GM008", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab X1", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1C 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", - "deretraction_speed": [ - "30", - "30" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "long_retractions_when_cut": [ - "0", - "0" - ], - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retraction_length": [ - "0.4", - "0.4" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.2 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" + "type": "machine", + "name": "Bambu Lab X1 0.2 nozzle", + "inherits": "Bambu Lab X1 0.4 nozzle", + "from": "system", + "setting_id": "GM008", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab X1", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", + "include": [ + "Bambu Lab X1 0.2 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..3167207ebe --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";=X1 20251031=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..d0a5e1716c --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..3709f9f179 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.4 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..67d293b29f --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json index d56f1094f8..667590e658 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.4 nozzle.json @@ -1,233 +1,246 @@ { - "type": "machine", - "name": "Bambu Lab X1 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM003", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab X1", - "printer_variant": "0.4", - "auxiliary_fan": "0", - "bed_exclude_area": [ - "0x0", - "18x0", - "18x28", - "0x28" - ], - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1" - ], - "default_print_profile": "0.20mm Standard @BBL X1C", - "deretraction_speed": [ - "30", - "30" - ], - "enable_long_retraction_when_cut": [ - "2" - ], - "extruder_offset": [ - "0x2" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "fan_direction": "left", - "long_retractions_when_cut": [ - "0", - "0" - ], - "machine_unload_filament_time": "28", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_height": "4.2", - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_length": [ - "0.8", - "0.8" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "scan_first_layer": "1", - "support_air_filtration": "1", - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.4 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", - "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n", - "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END\n", - "change_filament_gcode": ";=X1 20250822=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if nozzle_temperature[previous_extruder] > 142 && next_extruder < 255}\nM104 S{nozzle_temperature[previous_extruder]}\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S{nozzle_temperature[next_extruder]}\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" + "type": "machine", + "name": "Bambu Lab X1 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM003", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab X1", + "farthest_point_timelapse": "1", + "printer_variant": "0.4", + "auxiliary_fan": "0", + "bed_exclude_area": [ + "0x0", + "18x0", + "18x28", + "0x28" + ], + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1" + ], + "default_print_profile": "0.20mm Standard @BBL X1C", + "deretraction_speed": [ + "30", + "30" + ], + "enable_long_retraction_when_cut": [ + "2" + ], + "extruder_offset": [ + "0x2" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "fan_direction": "left", + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "include": [ + "Bambu Lab X1 0.4 nozzle template machine_start_gcode", + "Bambu Lab X1 0.4 nozzle template machine_end_gcode", + "Bambu Lab X1 0.4 nozzle template time_lapse_gcode", + "Bambu Lab X1 0.4 nozzle template change_filament_gcode" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "machine_unload_filament_time": "28", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ], + "machine_max_speed_x": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "nozzle_height": "4.2", + "nozzle_volume": [ + "107", + "107" + ], + "nozzle_flush_dataset": [ + "0", + "0" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "249", + "249" + ], + "retraction_length": [ + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "scan_first_layer": "1", + "wipe_distance": [ + "2", + "2" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..1c3c940d86 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 0.6 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.6 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.039\n G0 F1200.0 X226 Y12 Z0.2 E0.495\n G0 F1200.0 X226 Y1.5 Z0.2 E1.039\n G0 F1200.0 X220 Y1.5 Z0.2 E0.594\n G0 F1200.0 X220 Y8 Z0.2 E0.644\n G0 F1200.0 X210 Y8 Z0.2 E0.988\n G0 F1200.0 X210 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E19.826 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.312 F1200.0\n G0 X45.0 E0.374 F1200.0\n G0 X35.0 Y6.0 E1.460 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json index d5a6eb8a2a..6f58baa060 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.6 nozzle.json @@ -1,44 +1,45 @@ { - "type": "machine", - "name": "Bambu Lab X1 0.6 nozzle", - "inherits": "Bambu Lab X1 0.4 nozzle", - "from": "system", - "setting_id": "GM006", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab X1", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL X1 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "retraction_length": [ - "1.4", - "1.4" - ], - "retraction_minimum_travel": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.6 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.039\n G0 F1200.0 X226 Y12 Z0.2 E0.495\n G0 F1200.0 X226 Y1.5 Z0.2 E1.039\n G0 F1200.0 X220 Y1.5 Z0.2 E0.594\n G0 F1200.0 X220 Y8 Z0.2 E0.644\n G0 F1200.0 X210 Y8 Z0.2 E0.988\n G0 F1200.0 X210 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E19.826 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.312 F1200.0\n G0 X45.0 E0.374 F1200.0\n G0 X35.0 Y6.0 E1.460 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" + "type": "machine", + "name": "Bambu Lab X1 0.6 nozzle", + "inherits": "Bambu Lab X1 0.4 nozzle", + "from": "system", + "setting_id": "GM006", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab X1", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL X1 0.6 nozzle", + "include": [ + "Bambu Lab X1 0.6 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4" + ], + "retraction_minimum_travel": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..88f22deea6 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 0.8 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.8 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.154\n G0 F1200.0 X226 Y12 Z0.2 E0.550\n G0 F1200.0 X226 Y1.5 Z0.2 E1.154\n G0 F1200.0 X220 Y1.5 Z0.2 E0.660\n G0 F1200.0 X220 Y8 Z0.2 E0.716\n G0 F1200.0 X210 Y8 Z0.2 E1.098\n G0 F1200.0 X210 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E24.107 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.420 F1200.0\n G0 X45.0 E0.404 F1200.0\n G0 X35.0 Y6.0 E1.580 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json index 090a5665e0..35ec6c6d3f 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 0.8 nozzle.json @@ -1,44 +1,45 @@ { - "type": "machine", - "name": "Bambu Lab X1 0.8 nozzle", - "inherits": "Bambu Lab X1 0.4 nozzle", - "from": "system", - "setting_id": "GM007", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab X1", - "printer_variant": "0.8", - "default_print_profile": "0.40mm Standard @BBL X1 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "retract_length_toolchange": [ - "3", - "3" - ], - "retraction_length": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.8 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.154\n G0 F1200.0 X226 Y12 Z0.2 E0.550\n G0 F1200.0 X226 Y1.5 Z0.2 E1.154\n G0 F1200.0 X220 Y1.5 Z0.2 E0.660\n G0 F1200.0 X220 Y8 Z0.2 E0.716\n G0 F1200.0 X210 Y8 Z0.2 E1.098\n G0 F1200.0 X210 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E24.107 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.420 F1200.0\n G0 X45.0 E0.404 F1200.0\n G0 X35.0 Y6.0 E1.580 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" + "type": "machine", + "name": "Bambu Lab X1 0.8 nozzle", + "inherits": "Bambu Lab X1 0.4 nozzle", + "from": "system", + "setting_id": "GM007", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab X1", + "printer_variant": "0.8", + "default_print_profile": "0.40mm Standard @BBL X1 0.8 nozzle", + "include": [ + "Bambu Lab X1 0.8 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3", + "3" + ], + "retraction_length": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..7e4812ce30 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.2 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.2 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json index 9ce0f9268f..33a370cc95 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.2 nozzle.json @@ -1,218 +1,44 @@ { - "type": "machine", - "name": "Bambu Lab X1 Carbon 0.2 nozzle", - "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", - "from": "system", - "setting_id": "GM002", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab X1 Carbon", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1C 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", - "deretraction_speed": [ - "30", - "30" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "long_retractions_when_cut": [ - "0", - "0" - ], - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retraction_length": [ - "0.4", - "0.4" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1E 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.2 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.2 nozzle", + "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", + "from": "system", + "setting_id": "GM002", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab X1 Carbon", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", + "include": [ + "Bambu Lab X1 Carbon 0.2 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1E 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..1130465f85 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";=X1 20251031=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..e762dc0200 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..365adfe3de --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..7c52887ce4 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.4 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..7af804b64f --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json index 3303ece1b0..f208c2e5fd 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.4 nozzle.json @@ -1,227 +1,241 @@ { - "type": "machine", - "name": "Bambu Lab X1 Carbon 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM001", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab X1 Carbon", - "printer_variant": "0.4", - "bed_exclude_area": [ - "0x0", - "18x0", - "18x28", - "0x28" - ], - "default_print_profile": "0.20mm Standard @BBL X1C", - "deretraction_speed": [ - "30", - "30" - ], - "enable_long_retraction_when_cut": "2", - "extruder_offset": [ - "0x2" - ], - "fan_direction": "left", - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "long_retractions_when_cut": [ - "0", - "0" - ], - "machine_unload_filament_time": "28", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_height": "4.2", - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_length": [ - "0.8", - "0.8" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "scan_first_layer": "1", - "support_air_filtration": "1", - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.4 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", - "machine_end_gcode": ";===== date: 20240528 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos\nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A0 B20 L100 C37 D20 M40 E42 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C46 D10 M80 E46 F10 N80\nM1006 A44 B20 L100 C39 D20 M60 E48 F20 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C39 D10 M60 E39 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A0 B10 L100 C48 D10 M60 E44 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A49 B20 L100 C44 D20 M100 E41 F20 N100\nM1006 A0 B20 L100 C0 D20 M60 E0 F20 N100\nM1006 A0 B20 L100 C37 D20 M30 E37 F20 N60\nM1006 W\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n", - "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END\n", - "change_filament_gcode": ";=X1 20250822=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if nozzle_temperature[previous_extruder] > 142 && next_extruder < 255}\nM104 S{nozzle_temperature[previous_extruder]}\n{endif}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E-{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{else}\nM620.11 S0\n{endif}\nM400\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\n{if long_retractions_when_cut[previous_extruder]}\nM620.11 S1 I[previous_extruder] E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM628 S1\nG92 E0\nG1 E{retraction_distances_when_cut[previous_extruder]} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nM400\nM629 S1\n{else}\nM620.11 S0\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S{nozzle_temperature[next_extruder]}\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM001", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab X1 Carbon", + "farthest_point_timelapse": "1", + "printer_variant": "0.4", + "bed_exclude_area": [ + "0x0", + "18x0", + "18x28", + "0x28" + ], + "default_print_profile": "0.20mm Standard @BBL X1C", + "deretraction_speed": [ + "30", + "30" + ], + "enable_long_retraction_when_cut": "2", + "extruder_offset": [ + "0x2" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "fan_direction": "left", + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "include": [ + "Bambu Lab X1 Carbon 0.4 nozzle template machine_start_gcode", + "Bambu Lab X1 Carbon 0.4 nozzle template machine_end_gcode", + "Bambu Lab X1 Carbon 0.4 nozzle template time_lapse_gcode", + "Bambu Lab X1 Carbon 0.4 nozzle template change_filament_gcode", + "Bambu Lab X1 Carbon 0.4 nozzle template layer_change_gcode" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "machine_unload_filament_time": "28", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ], + "machine_max_speed_x": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "nozzle_height": "4.2", + "nozzle_volume": [ + "107", + "107" + ], + "nozzle_flush_dataset": [ + "0", + "0" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "249", + "249" + ], + "retraction_length": [ + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "scan_first_layer": "1", + "wipe_distance": [ + "2", + "2" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..99900d3bdb --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.6 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.6 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.039\n G0 F1200.0 X226 Y12 Z0.2 E0.495\n G0 F1200.0 X226 Y1.5 Z0.2 E1.039\n G0 F1200.0 X220 Y1.5 Z0.2 E0.594\n G0 F1200.0 X220 Y8 Z0.2 E0.644\n G0 F1200.0 X210 Y8 Z0.2 E0.988\n G0 F1200.0 X210 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E19.826 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.312 F1200.0\n G0 X45.0 E0.374 F1200.0\n G0 X35.0 Y6.0 E1.460 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json index 59e54fdc44..f8d2014482 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.6 nozzle.json @@ -1,40 +1,48 @@ { - "type": "machine", - "name": "Bambu Lab X1 Carbon 0.6 nozzle", - "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", - "from": "system", - "setting_id": "GM005", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab X1 Carbon", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4" - ], - "retraction_minimum_travel": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1E 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.6 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.039\n G0 F1200.0 X226 Y12 Z0.2 E0.495\n G0 F1200.0 X226 Y1.5 Z0.2 E1.039\n G0 F1200.0 X220 Y1.5 Z0.2 E0.594\n G0 F1200.0 X220 Y8 Z0.2 E0.644\n G0 F1200.0 X210 Y8 Z0.2 E0.988\n G0 F1200.0 X210 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E19.826 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.312 F1200.0\n G0 X45.0 E0.374 F1200.0\n G0 X35.0 Y6.0 E1.460 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.6 nozzle", + "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", + "from": "system", + "setting_id": "GM005", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab X1 Carbon", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.6 nozzle" + ], + "include": [ + "Bambu Lab X1 Carbon 0.6 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4" + ], + "retraction_minimum_travel": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1E 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..b179c1ed00 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.8 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1-0.8 ====================\n;===== date: 20251031 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.154\n G0 F1200.0 X226 Y12 Z0.2 E0.550\n G0 F1200.0 X226 Y1.5 Z0.2 E1.154\n G0 F1200.0 X220 Y1.5 Z0.2 E0.660\n G0 F1200.0 X220 Y8 Z0.2 E0.716\n G0 F1200.0 X210 Y8 Z0.2 E1.098\n G0 F1200.0 X210 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E24.107 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.420 F1200.0\n G0 X45.0 E0.404 F1200.0\n G0 X35.0 Y6.0 E1.580 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json index dd8bb88c52..5112f3979a 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon 0.8 nozzle.json @@ -1,43 +1,48 @@ { - "type": "machine", - "name": "Bambu Lab X1 Carbon 0.8 nozzle", - "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", - "from": "system", - "setting_id": "GM004", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab X1 Carbon", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1C 0.8 nozzle" - ], - "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "retract_length_toolchange": [ - "3", - "3" - ], - "retraction_length": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1E 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "machine_start_gcode": ";===== machine: X1-0.8 ====================\n;===== date: 20250909 ==================\n;===== start printer sound ================\nM17\nM400 S1\nM1006 S1\nM1006 A0 B10 L100 C37 D10 M60 E37 F10 N60\nM1006 A0 B10 L100 C41 D10 M60 E41 F10 N60\nM1006 A0 B10 L100 C44 D10 M60 E44 F10 N60\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N60\nM1006 A46 B10 L100 C43 D10 M70 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A43 B10 L100 C0 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A41 B10 L100 C0 D10 M100 E41 F10 N100\nM1006 A44 B10 L100 C0 D10 M100 E44 F10 N100\nM1006 A49 B10 L100 C0 D10 M100 E49 F10 N100\nM1006 A0 B10 L100 C0 D10 M100 E0 F10 N100\nM1006 A48 B10 L100 C44 D10 M60 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A44 B10 L100 C0 D10 M90 E39 F10 N100\nM1006 A0 B10 L100 C0 D10 M60 E0 F10 N100\nM1006 A46 B10 L100 C43 D10 M60 E39 F10 N100\nM1006 W\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S250 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== nozzle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.154\n G0 F1200.0 X226 Y12 Z0.2 E0.550\n G0 F1200.0 X226 Y1.5 Z0.2 E1.154\n G0 F1200.0 X220 Y1.5 Z0.2 E0.660\n G0 F1200.0 X220 Y8 Z0.2 E0.716\n G0 F1200.0 X210 Y8 Z0.2 E1.098\n G0 F1200.0 X210 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E24.107 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.420 F1200.0\n G0 X45.0 E0.404 F1200.0\n G0 X35.0 Y6.0 E1.580 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" + "type": "machine", + "name": "Bambu Lab X1 Carbon 0.8 nozzle", + "inherits": "Bambu Lab X1 Carbon 0.4 nozzle", + "from": "system", + "setting_id": "GM004", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab X1 Carbon", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", + "include": [ + "Bambu Lab X1 Carbon 0.8 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3", + "3" + ], + "retraction_length": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1E 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json index a3a89c14de..4fbc650872 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1 Carbon.json @@ -1,13 +1,13 @@ { - "type": "machine_model", - "name": "Bambu Lab X1 Carbon", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "BL-P001", - "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu TPU 95A @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab X1 Carbon", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "BL-P001", + "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PC @BBL X1C;Bambu TPU 95A @BBL X1C;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Bambu PETG HF @BBL X1C;Bambu PLA Pure @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1.json b/resources/profiles/BBL/machine/Bambu Lab X1.json index 23a90ded95..607302b5f8 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1.json @@ -1,13 +1,13 @@ { - "type": "machine_model", - "name": "Bambu Lab X1", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "BL-P002", - "default_materials": "Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab X1", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "BL-P002", + "default_materials": "Bambu PLA Matte @BBL X1;Bambu PLA Basic @BBL X1;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1C;Bambu PLA Silk @BBL X1;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PLA;Generic PLA High Speed @BBL X1C;Generic PETG;Bambu PETG HF @BBL X1C;Bambu PLA Pure @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..c3a252568e --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.2 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1E-0.2 =========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json index b892dc36e3..5dfc7925b9 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.2 nozzle.json @@ -1,218 +1,44 @@ { - "type": "machine", - "name": "Bambu Lab X1E 0.2 nozzle", - "inherits": "Bambu Lab X1E 0.4 nozzle", - "from": "system", - "setting_id": "GM025", - "instantiation": "true", - "nozzle_diameter": [ - "0.2" - ], - "printer_model": "Bambu Lab X1E", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1C 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", - "deretraction_speed": [ - "30", - "30" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "long_retractions_when_cut": [ - "0", - "0" - ], - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_type": [ - "stainless_steel", - "stainless_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retraction_length": [ - "0.4", - "0.4" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.2 nozzle", - "Bambu Lab P1P 0.2 nozzle", - "Bambu Lab X1 0.2 nozzle", - "Bambu Lab X1 Carbon 0.2 nozzle", - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle" - ], - "machine_start_gcode": ";===== machine: X1E-0.2 =========================\n;===== date: 20250909 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n\t{if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.160\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.080\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.080 K0.160\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.08 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.08}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "type": "machine", + "name": "Bambu Lab X1E 0.2 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM025", + "instantiation": "true", + "nozzle_diameter": [ + "0.2" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL X1C 0.2 nozzle", + "include": [ + "Bambu Lab X1E 0.2 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.14" + ], + "min_layer_height": [ + "0.04" + ], + "retraction_length": [ + "0.4", + "0.4" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.2 nozzle", + "Bambu Lab P1P 0.2 nozzle", + "Bambu Lab X1 0.2 nozzle", + "Bambu Lab X1 Carbon 0.2 nozzle", + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab X2D 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..e91ec6e911 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";=X1E 20251031=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if old_filament_temp > 142 && next_extruder < 255}\nM104 S[old_filament_temp]\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E-[retraction_distance_when_cut] F200\nM400\n{endif}\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\nM400\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E{retraction_distance_when_cut - 2} F200\nG1 E2 F20\nM400\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S[new_filament_temp]\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..5626f5737c --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": "; layer num/total_layer_count: {layer_num+1}/[total_layer_count]\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..fd577a55f6 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..e38e9ff110 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1E-0.4 =========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ====\n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..7bd08b5cae --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json index 4b2fe3c755..5171880c21 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.4 nozzle.json @@ -1,228 +1,243 @@ { - "type": "machine", - "name": "Bambu Lab X1E 0.4 nozzle", - "inherits": "fdm_bbl_3dp_001_common", - "from": "system", - "setting_id": "GM026", - "instantiation": "true", - "nozzle_diameter": [ - "0.4" - ], - "printer_model": "Bambu Lab X1E", - "printer_variant": "0.4", - "bed_exclude_area": [ - "0x0", - "18x0", - "18x28", - "0x28" - ], - "default_print_profile": "0.20mm Standard @BBL X1C", - "deretraction_speed": [ - "30", - "30" - ], - "enable_long_retraction_when_cut": "1", - "extruder_offset": [ - "0x2" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow" - ], - "fan_direction": "left", - "long_retractions_when_cut": [ - "0", - "0" - ], - "machine_unload_filament_time": "28", - "machine_max_acceleration_e": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_extruding": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_retracting": [ - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_travel": [ - "9000", - "9000", - "9000", - "9000" - ], - "machine_max_acceleration_x": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_y": [ - "20000", - "20000", - "20000", - "20000" - ], - "machine_max_acceleration_z": [ - "500", - "200", - "200", - "200" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5", - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_y": [ - "9", - "9", - "9", - "9" - ], - "machine_max_jerk_z": [ - "3", - "3", - "3", - "3" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30" - ], - "machine_max_speed_x": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_y": [ - "500", - "200", - "200", - "200" - ], - "machine_max_speed_z": [ - "20", - "20", - "20", - "20" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "nozzle_height": "4.2", - "nozzle_type": [ - "hardened_steel", - "hardened_steel" - ], - "nozzle_volume": [ - "107", - "107" - ], - "printer_extruder_id": [ - "1", - "1" - ], - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "retract_before_wipe": [ - "0%", - "0%" - ], - "retract_length_toolchange": [ - "2", - "2" - ], - "retract_lift_above": [ - "0", - "0" - ], - "retract_lift_below": [ - "249", - "249" - ], - "retraction_length": [ - "0.8", - "0.8" - ], - "retraction_minimum_travel": [ - "1", - "1" - ], - "retraction_speed": [ - "30", - "30" - ], - "retract_restart_extra": [ - "0", - "0" - ], - "retract_restart_extra_toolchange": [ - "0", - "0" - ], - "retract_when_changing_layer": [ - "1", - "1" - ], - "retraction_distances_when_cut": [ - "18", - "18" - ], - "scan_first_layer": "1", - "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "wipe_distance": [ - "2", - "2" - ], - "wipe": [ - "1", - "1" - ], - "z_hop": [ - "0.4", - "0.4" - ], - "z_hop_types": [ - "Auto Lift", - "Auto Lift" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab P1P 0.4 nozzle", - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle" - ], - "machine_start_gcode": ";===== machine: X1E-0.4 =========================\n;===== date: 20250909 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ====\n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y11 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E0.700\nG0 X231 E0.700 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n T1000\n\n G0 F1200.0 X231 Y12 Z0.2 E0.577\n G0 F1200.0 X226 Y12 Z0.2 E0.275\n G0 F1200.0 X226 Y1.5 Z0.2 E0.577\n G0 F1200.0 X220 Y1.5 Z0.2 E0.330\n G0 F1200.0 X220 Y8 Z0.2 E0.358\n G0 F1200.0 X210 Y8 Z0.2 E0.549\n G0 F1200.0 X210 Y1.5 Z0.2 E0.357\n\n G0 X48.0 E11.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E0.772 F1200.0\n G0 X45.0 E0.22 F1200.0\n G0 X35.0 Y6.0 E0.86 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E9.35441 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.040\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.020\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E14.3 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.020 K0.040\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E1.24726 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.02 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.02}\n M623\n\n G1 X140.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.31181 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\n;===== purge line to wipe the nozzle ============================\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X18.0 Y2.5 Z0.8 F18000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG1 Z0.2\nG0 X239 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y12 E0.7 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n", - "machine_end_gcode": ";===== date: 20240402 =====================\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-0.8 F1800 ; retract\nG1 Z{max_layer_z + 0.5} F900 ; lower z a little\nG1 X65 Y245 F12000 ; move to safe pos \nG1 Y265 F3000\n\nG1 X65 Y245 F12000\nG1 Y265 F3000\nM141 S0 ; turn off chamber \nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\n\nG1 X100 F12000 ; wipe\n; pull back filament to AMS\nM620 S255\nG1 X20 Y50 F12000\nG1 Y-3\nT255\nG1 X65 F12000\nG1 Y265\nG1 X100 F12000 ; wipe\nM621 S255\nM104 S0 ; turn off hotend\n\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S3 ;wait for last picture to be taken\nM623; end of \"timelapse_record_flag\"\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (max_layer_z + 100.0) < 250}\n G1 Z{max_layer_z + 100.0} F600\n G1 Z{max_layer_z +98.0}\n{else}\n G1 Z250 F600\n G1 Z248\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM17 X0.8 Y0.8 Z0.5 ; lower motor current to 45% power\nM960 S5 P0 ; turn off logo lamp\n\n", - "time_lapse_gcode": ";========Date 20250206========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firmware, default turned on\nM1002 judge_flag timelapse_record_flag\nM622 J1\n{if timelapse_type == 0} ; timelapse without wipe tower\nM971 S11 C10 O0\nM1004 S5 P1 ; external shutter\n{elsif timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 X65 Y245 F20000 ; move to safe pos\nG17\nG2 Z{layer_z} I0.86 J0.86 P1 F20000\nG1 Y265 F3000\nM400\nM1004 S5 P1 ; external shutter\nM400 P300\nM971 S11 C10 O0\nG92 E0\nG1 X100 F5000\nG1 Y255 F20000\n{endif}\nM623\n; SKIPPABLE_END", - "change_filament_gcode": ";=X1E 20250822=\nM620 S[next_extruder]A\nM204 S9000\nG1 Z{max_layer_z + 3.0} F1200\n\nG1 X70 F21000\nG1 Y245\nG1 Y265 F3000\nM400\nM106 P1 S0\nM106 P2 S0\n{if nozzle_temperature[previous_extruder] > 142 && next_extruder < 255}\nM104 S{nozzle_temperature[previous_extruder]}\n{endif}\nG1 X90 F3000\nG1 Y255 F4000\nG1 X100 F5000\nG1 X120 F15000\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E-[retraction_distance_when_cut] F200\nM400\n{endif}\nG1 X20 Y50 F21000\nG1 Y-3\n{if toolchange_count == 2}\n; get travel path for change filament\nM620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\nM620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\nM620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\nM620.1 E F{flush_volumetric_speeds[previous_extruder]/2.4053*60} T{flush_temperatures[previous_extruder]}\nT[next_extruder]\nM620.1 E F{flush_volumetric_speeds[next_extruder]/2.4053*60} T{flush_temperatures[next_extruder]}\n\n{if next_extruder < 255}\nM400\n{if long_retraction_when_cut && retraction_distance_when_cut > 2}\nG1 E{retraction_distance_when_cut - 2} F200\nG1 E2 F20\nM400\n{endif}\nG92 E0\n{if flush_length_1 > 1}\nM83\n; FLUSH_START\n; always use highest temperature to flush\nM400\n{if filament_type[next_extruder] == \"PETG\"}\nM109 S260\n{elsif filament_type[next_extruder] == \"PVA\"}\nM109 S210\n{else}\nM109 S{flush_temperatures[next_extruder]}\n{endif}\n{if flush_length_1 > 23.7}\nG1 E23.7 F{flush_volumetric_speeds[previous_extruder]/2.4053*60} ; do not need pulsatile flushing for start part\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{(flush_length_1 - 23.7) * 0.02} F50\nG1 E{(flush_length_1 - 23.7) * 0.23} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\n{else}\nG1 E{flush_length_1} F{flush_volumetric_speeds[previous_extruder]/2.4053*60}\n{endif}\n; FLUSH_END\nG1 E-[old_retract_length_toolchange] F1800\nG1 E[old_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_2 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\nG1 E{flush_length_2 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_2 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_3 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\nG1 E{flush_length_3 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_3 * 0.02} F50\n; FLUSH_END\nG1 E-[new_retract_length_toolchange] F1800\nG1 E[new_retract_length_toolchange] F300\n{endif}\n\n{if flush_length_4 > 1}\n\nG91\nG1 X3 F12000; move aside to extrude\nG90\nM83\n\n; FLUSH_START\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\nG1 E{flush_length_4 * 0.18} F{flush_volumetric_speeds[next_extruder]/2.4053*60}\nG1 E{flush_length_4 * 0.02} F50\n; FLUSH_END\n{endif}\n; FLUSH_START\nM400\nM109 S{nozzle_temperature[next_extruder]}\nG1 E2 F{flush_volumetric_speeds[next_extruder]/2.4053*60} ;Compensate for filament spillage during waiting temperature\n; FLUSH_END\nM400\nG92 E0\nG1 E-[new_retract_length_toolchange] F1800\nM106 P1 S255\nM400 S3\n\nG1 X70 F5000\nG1 X90 F3000\nG1 Y255 F4000\nG1 X105 F5000\nG1 Y265 F5000\nG1 X70 F10000\nG1 X100 F5000\nG1 X70 F10000\nG1 X100 F5000\n\nG1 X70 F10000\nG1 X80 F15000\nG1 X60\nG1 X80\nG1 X60\nG1 X80 ; shake to put down garbage\nG1 X100 F5000\nG1 X165 F15000; wipe and shake\nG1 Y256 ; move Y to aside, prevent collision\nM400\nG1 Z{max_layer_z + 3.0} F3000\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[default_acceleration]\n{endif}\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\nM621 S[next_extruder]A\n" + "type": "machine", + "name": "Bambu Lab X1E 0.4 nozzle", + "inherits": "fdm_bbl_3dp_001_common", + "from": "system", + "setting_id": "GM026", + "instantiation": "true", + "nozzle_diameter": [ + "0.4" + ], + "printer_model": "Bambu Lab X1E", + "farthest_point_timelapse": "1", + "printer_variant": "0.4", + "bed_exclude_area": [ + "0x0", + "18x0", + "18x28", + "0x28" + ], + "default_print_profile": "0.20mm Standard @BBL X1C", + "deretraction_speed": [ + "30", + "30" + ], + "enable_long_retraction_when_cut": "1", + "extruder_offset": [ + "0x2" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow" + ], + "fan_direction": "left", + "hotend_cooling_rate": [ + "2", + "2" + ], + "hotend_heating_rate": [ + "2", + "2" + ], + "include": [ + "Bambu Lab X1E 0.4 nozzle template machine_start_gcode", + "Bambu Lab X1E 0.4 nozzle template machine_end_gcode", + "Bambu Lab X1E 0.4 nozzle template time_lapse_gcode", + "Bambu Lab X1E 0.4 nozzle template change_filament_gcode", + "Bambu Lab X1E 0.4 nozzle template layer_change_gcode" + ], + "long_retractions_when_cut": [ + "0", + "0" + ], + "machine_unload_filament_time": "28", + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30" + ], + "machine_max_speed_x": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500", + "500", + "500" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "nozzle_height": "4.2", + "nozzle_volume": [ + "107", + "107" + ], + "nozzle_flush_dataset": [ + "0", + "0" + ], + "printer_extruder_id": [ + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "retract_before_wipe": [ + "0%", + "0%" + ], + "retract_length_toolchange": [ + "2", + "2" + ], + "retract_lift_above": [ + "0", + "0" + ], + "retract_lift_below": [ + "249", + "249" + ], + "retraction_length": [ + "0.8", + "0.8" + ], + "retraction_minimum_travel": [ + "1", + "1" + ], + "retraction_speed": [ + "30", + "30" + ], + "retract_restart_extra": [ + "0", + "0" + ], + "retract_restart_extra_toolchange": [ + "0", + "0" + ], + "retract_when_changing_layer": [ + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18" + ], + "scan_first_layer": "1", + "support_air_filtration": "1", + "support_chamber_temp_control": "1", + "wipe_distance": [ + "2", + "2" + ], + "wipe": [ + "1", + "1" + ], + "z_hop": [ + "0.4", + "0.4" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab P1P 0.4 nozzle", + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab X2D 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..e1d67f8cb8 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.6 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1E-0.6 =========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.039\n G0 F1200.0 X226 Y12 Z0.2 E0.495\n G0 F1200.0 X226 Y1.5 Z0.2 E1.039\n G0 F1200.0 X220 Y1.5 Z0.2 E0.594\n G0 F1200.0 X220 Y8 Z0.2 E0.644\n G0 F1200.0 X210 Y8 Z0.2 E0.988\n G0 F1200.0 X210 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E19.826 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.312 F1200.0\n G0 X45.0 E0.374 F1200.0\n G0 X35.0 Y6.0 E1.460 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json index 267ab51466..2f45cee711 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.6 nozzle.json @@ -1,40 +1,45 @@ { - "type": "machine", - "name": "Bambu Lab X1E 0.6 nozzle", - "inherits": "Bambu Lab X1E 0.4 nozzle", - "from": "system", - "setting_id": "GM027", - "instantiation": "true", - "nozzle_diameter": [ - "0.6" - ], - "printer_model": "Bambu Lab X1E", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4" - ], - "retraction_minimum_travel": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.6 nozzle", - "Bambu Lab P1P 0.6 nozzle", - "Bambu Lab X1 0.6 nozzle", - "Bambu Lab X1 Carbon 0.6 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle" - ], - "machine_start_gcode": ";===== machine: X1E-0.6 =========================\n;===== date: 20250909 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y1.0 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X240 E25 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nG0 Y15 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\nG0 X239.5\nG0 E0.2\nG0 Y1.5 E1.166\nG0 X231 E1.166 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.039\n G0 F1200.0 X226 Y12 Z0.2 E0.495\n G0 F1200.0 X226 Y1.5 Z0.2 E1.039\n G0 F1200.0 X220 Y1.5 Z0.2 E0.594\n G0 F1200.0 X220 Y8 Z0.2 E0.644\n G0 F1200.0 X210 Y8 Z0.2 E0.988\n G0 F1200.0 X210 Y1.5 Z0.2 E0.642\n\n G0 X48.0 E19.826 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.312 F1200.0\n G0 X45.0 E0.374 F1200.0\n G0 X35.0 Y6.0 E1.460 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X185.000 E16.9 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.030\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.015\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.9) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X18 E23.9 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.015 K0.030\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.25000 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X70.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X75.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X80.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X85.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X90.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X95.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X100.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X105.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X110.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X115.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X120.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X125.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X130.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X135.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.015 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*0.015}\n M623\n\n G1 X140.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X145.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X150.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X155.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X160.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X165.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X170.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X175.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X180.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X185.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X190.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X195.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X200.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X205.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X210.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X215.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G1 X220.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5)/ 4 * 60}\n G1 X225.000 E0.56250 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "type": "machine", + "name": "Bambu Lab X1E 0.6 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM027", + "instantiation": "true", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @BBL X1C 0.6 nozzle", + "include": [ + "Bambu Lab X1E 0.6 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.42" + ], + "min_layer_height": [ + "0.12" + ], + "retraction_length": [ + "1.4", + "1.4" + ], + "retraction_minimum_travel": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.6 nozzle", + "Bambu Lab P1P 0.6 nozzle", + "Bambu Lab X1 0.6 nozzle", + "Bambu Lab X1 Carbon 0.6 nozzle", + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab X2D 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..ce489cd506 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X1E 0.8 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";===== machine: X1E-0.8 =========================\n;===== date: 20251031 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action:54\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.154\n G0 F1200.0 X226 Y12 Z0.2 E0.550\n G0 F1200.0 X226 Y1.5 Z0.2 E1.154\n G0 F1200.0 X220 Y1.5 Z0.2 E0.660\n G0 F1200.0 X220 Y8 Z0.2 E0.716\n G0 F1200.0 X210 Y8 Z0.2 E1.098\n G0 F1200.0 X210 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E24.107 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.420 F1200.0\n G0 X45.0 E0.404 F1200.0\n G0 X35.0 Y6.0 E1.580 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json index 4d8a9c9bd0..d2adeb9845 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E 0.8 nozzle.json @@ -1,43 +1,48 @@ { - "type": "machine", - "name": "Bambu Lab X1E 0.8 nozzle", - "inherits": "Bambu Lab X1E 0.4 nozzle", - "from": "system", - "setting_id": "GM028", - "instantiation": "true", - "nozzle_diameter": [ - "0.8" - ], - "printer_model": "Bambu Lab X1E", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X1C 0.8 nozzle" - ], - "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "retract_length_toolchange": [ - "3", - "3" - ], - "retraction_length": [ - "3", - "3" - ], - "upward_compatible_machine": [ - "Bambu Lab P1S 0.8 nozzle", - "Bambu Lab P1P 0.8 nozzle", - "Bambu Lab X1 0.8 nozzle", - "Bambu Lab X1 Carbon 0.8 nozzle", - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle" - ], - "machine_start_gcode": ";===== machine: X1E-0.8 =========================\n;===== date: 20250909 =====================\n;===== turn on the HB fan =================\nM104 S75 ;set extruder temp to turn on the HB fan and prevent filament oozing from nozzle\n;===== reset machine status =================\nM290 X40 Y40 Z2.6666666\nG91\nM17 Z0.4 ; lower the z-motor current\nG380 S2 Z30 F300 ; G380 is same as G38; lower the hotbed , to prevent the nozzle is below the hotbed\nG380 S2 Z-25 F300 ;\nG1 Z5 F300;\nG90\nM17 X1.2 Y1.2 Z0.75 ; reset motor current to default\nM960 S5 P1 ; turn on logo lamp\nG90\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 5\nM221 X0 Y0 Z0 ; turn off soft endstop to prevent protential logic problem\nG29.1 Z{+0.0} ; clear z-trim value first\nM204 S10000 ; init ACC set to 10m/s^2\n\n;==== if Chamber Cooling is necessary ==== \n\n{if (filament_type[initial_no_support_extruder]==\"PLA\") || (filament_type[initial_no_support_extruder]==\"PETG\") || (filament_type[initial_no_support_extruder]==\"TPU\") || (filament_type[initial_no_support_extruder]==\"PVA\") || (filament_type[initial_no_support_extruder]==\"PLA-CF\") || (filament_type[initial_no_support_extruder]==\"PETG-CF\")}\nM1002 gcode_claim_action : 29\nG28\nG90\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nG1 Z75\nM140 S0 ; stop heatbed from heating\nM106 P2 S255 ; open auxiliary fan for cooling\nM106 P3 S255 ; open chamber fan for cooling\nM191 S0 ; wait for chamber temp\nM106 P3 S0 ; reset chamber fan cmd\nM106 P2 S0; reset auxiliary fan cmd\n{endif}\n\n;===== heatbed preheat ====================\nM1002 gcode_claim_action : 2\nM140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\n\n{if scan_first_layer}\n;=========register first layer scan=====\nM977 S1 P60\n{endif}\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\n;===== prepare print temperature and material ==========\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nG91\nG0 Z10 F1200\nG90\nG28 X\nM975 S1 ; turn on\nG1 X60 F12000\nG1 Y245\nG1 Y265 F3000\nM620 M\nM620 S[initial_no_support_extruder]A ; switch material if AMS exist\n M109 S[nozzle_temperature_initial_layer]\n G1 X120 F12000\n\n G1 X20 Y50 F12000\n G1 Y-3\n T[initial_no_support_extruder]\n G1 X54 F12000\n G1 Y265\n M400\nM621 S[initial_no_support_extruder]A\nM620.1 E F{flush_volumetric_speeds[initial_no_support_extruder]/2.4053*60} T{flush_temperatures[initial_no_support_extruder]}\n\n\nM412 S1 ; ===turn on filament runout detection===\n\nM109 S290 ;set nozzle to common flush temp\nM106 P1 S0\nG92 E0\nG1 E50 F200\nM400\nM104 S[nozzle_temperature_initial_layer]\nG92 E0\nG1 E50 F200\nM400\nM106 P1 S255\nG92 E0\nG1 E5 F300\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20} ; drop nozzle temp, make filament shink a bit\nG92 E0\nG1 E-0.5 F300\n\nG1 X70 F9000\nG1 X76 F15000\nG1 X65 F15000\nG1 X76 F15000\nG1 X65 F15000; shake to put down garbage\nG1 X80 F6000\nG1 X95 F15000\nG1 X80 F15000\nG1 X165 F15000; wipe and shake\nM400\nM106 P1 S0\n\n;===== set chamber temperature ==========\n{if (overall_chamber_temperature >= 40)}\nM106 P2 S255 ; open big fan to help heating\nM141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n{endif}\n\n;===== prepare print temperature and material end =====\n\n\n;===== wipe nozzle ===============================\nM1002 gcode_claim_action : 14\nM975 S1\nM106 S255\nG1 X65 Y230 F18000\nG1 Y264 F6000\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]-20}\nG1 X100 F18000 ; first wipe mouth\n\nG0 X135 Y253 F20000 ; move to exposed steel surface edge\nG28 Z P0 T300; home z with low precision,permit 300deg temperature\nG29.2 S0 ; turn off ABL\nG0 Z5 F20000\n\nG1 X60 Y265\nG92 E0\nG1 E-0.5 F300 ; retrack more\nG1 X100 F5000; second wipe mouth\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X100 F5000\nG1 X70 F15000\nG1 X90 F5000\nG0 X128 Y261 Z-1.5 F20000 ; move to exposed steel surface and stop the nozzle\nM104 S140 ; set temp down to heatbed acceptable\nM106 S255 ; turn on fan (G28 has turn off fan)\n\nM221 S; push soft endstop status\nM221 Z0 ;turn off Z axis endstop\nG0 Z0.5 F20000\nG0 X125 Y259.5 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y262.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y260.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.5\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 Z0.5 F20000\nG0 X125 Y261.0\nG0 Z-1.01\nG0 X131 F211\nG0 X124\nG0 X128\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\nG2 I0.5 J0 F300\n\nM109 S140 ; wait nozzle temp down to heatbed acceptable\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\nG2 I0.5 J0 F3000\n\nM221 R; pop softend status\nG1 Z10 F1200\nM400\nG1 Z10\nG1 F30000\nG1 X128 Y128\nG29.2 S1 ; turn on ABL\n;G28 ; home again after hard wipe mouth\nM106 S0 ; turn off fan , too noisy\n;===== wipe nozzle end ================================\n\n;===== check scanner clarity ===========================\nG1 X128 Y128 F24000\nG28 Z P0\nM972 S5 P0\nG1 X230 Y15 F24000\n;===== check scanner clarity end =======================\n\n;===== bed leveling ==================================\nM1002 judge_flag g29_before_print_flag\nM622 J1\n\n M1002 gcode_claim_action : 1\n G29 A X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]}\n M400\n M500 ; save cali data\n\nM623\n;===== bed leveling end ================================\n\n;===== home after wipe mouth============================\nM1002 judge_flag g29_before_print_flag\nM622 J0\n\n M1002 gcode_claim_action : 13\n G28\n\nM623\n;===== home after wipe mouth end =======================\n\nM975 S1 ; turn on vibration supression\n\n;=============turn on fans to prevent PLA jamming=================\n{if filament_type[initial_no_support_extruder]==\"PLA\"}\n {if (bed_temperature[initial_no_support_extruder] >50)||(bed_temperature_initial_layer[initial_no_support_extruder] >50)}\n M106 P3 S255\n {elsif (bed_temperature[initial_no_support_extruder] >45)||(bed_temperature_initial_layer[initial_no_support_extruder] >45)}\n M106 P3 S180\n {endif};Prevent PLA from jamming\n M142 P1 R35 S40\n{endif}\nM106 P2 S100 ; turn on big fan ,to cool down toolhead\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; set extrude temp earlier, to reduce wait time\n\n;===== mech mode fast check============================\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q1 A7 B30 C80 H15 K0\nM974 Q1 S2 P0\n\nG1 X128 Y128 Z10 F20000\nM400 P200\nM970.3 Q0 A7 B30 C90 Q0 H15 K0\nM974 Q0 S2 P0\n\nM975 S1\nG1 F30000\nG1 X230 Y15\nG28 X ; re-home XY\n;===== mech mode fast check============================\n\n{if scan_first_layer}\n;start heatbed scan====================================\nM976 S2 P1\nG90\nG1 X128 Y128 F20000\nM976 S3 P2 ;register void printing detection\n{endif}\n\n;===== noozle load line ===============================\nM975 S1\nG90\nM83\nT1000\nG1 X18.0 Y0.5 Z0.8 F18000;Move to start position\nM109 S{nozzle_temperature[initial_no_support_extruder]}\nG1 Z0.2\nG0 E2 F300\nG0 X129 E15 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\nG0 X240 E15\nG0 Y11 E1.364 F{outer_wall_volumetric_speed/(0.3*1.0)/ 4 * 60}\nG0 X239.5\nG0 E0.3\nG0 Y1.5 E1.300\nG0 X231 E1.160 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM400\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n;curr_bed_type={curr_bed_type}\n{if curr_bed_type==\"Textured PEI Plate\"}\nG29.1 Z{-0.04} ; for Textured PEI Plate\n{endif}\n\n;===== draw extrinsic para cali paint =================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M1002 gcode_claim_action : 8\n\n G0 F1200.0 X231 Y12 Z0.2 E1.154\n G0 F1200.0 X226 Y12 Z0.2 E0.550\n G0 F1200.0 X226 Y1.5 Z0.2 E1.154\n G0 F1200.0 X220 Y1.5 Z0.2 E0.660\n G0 F1200.0 X220 Y8 Z0.2 E0.716\n G0 F1200.0 X210 Y8 Z0.2 E1.098\n G0 F1200.0 X210 Y1.5 Z0.2 E0.714\n\n G0 X48.0 E24.107 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\n G0 X48.0 Y12 E1.420 F1200.0\n G0 X45.0 E0.404 F1200.0\n G0 X35.0 Y6.0 E1.580 F1200.0\n\n ;=========== extruder cali extrusion ==================\n T1000\n M83\n {if default_acceleration > 0}\n {if outer_wall_acceleration > 0}\n M204 S[outer_wall_acceleration]\n {else}\n M204 S[default_acceleration]\n {endif}\n {endif}\n G0 X35.000 Y6.000 Z0.300 F30000 E0\n G1 F1500.000 E0.800\n M106 S0 ; turn off fan\n G0 X110.000 E9.35441 F4800\n G0 X185.000 E9.35441 F4800\n G0 X187 Z0\n G1 F1500.000 E-0.800\n G0 Z1\n G0 X180 Z0.3 F18000\n\n M900 L1000.0 M1.0\n M900 K0.020\n G0 X45.000 F30000\n G0 Y8.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.010\n G0 X45.000 F30000\n G0 Y10.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n M400\n\n G0 X45.000 F30000\n M900 K0.000\n G0 X45.000 F30000\n G0 Y12.000 F30000\n G1 F1500.000 E0.800\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 F1500.000 E-0.800\n G1 X183 Z0.15 F30000\n G1 X185\n G1 Z1.0\n G0 Y6.000 F30000 ; move y to clear pos\n G1 Z0.3\n\n G0 X45.000 F30000 ; move to start point\n\nM623 ; end of \"draw extrinsic para cali paint\"\n\nM1002 judge_flag extrude_cali_flag\nM622 J0\n G0 X231 Y1.5 F30000\n G0 X129 E14 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G0 X18 E15 F{outer_wall_volumetric_speed/(0.3*0.5) * 60}\nM623\n\nM104 S140\n\n\n;=========== laser and rgb calibration ===========\nM400\nM18 E\nM500 R\n\nM973 S3 P14\n\nG1 X120 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nT1100\nG1 X235.0 Y1.0 Z0.3 F18000.0;Move to first extrude line pos\nM400 P100\nM960 S1 P1\nM400 P100\nM973 S6 P0; use auto exposure for horizontal laser by xcam\nM960 S0 P0\n\nG1 X240.0 Y6.0 Z0.3 F18000.0;Move to vertical extrude line pos\nM960 S2 P1\nM400 P100\nM973 S6 P1; use auto exposure for vertical laser by xcam\nM960 S0 P0\n\n;=========== handeye calibration ======================\nM1002 judge_flag extrude_cali_flag\nM622 J1\n\n M973 S3 P1 ; camera start stream\n M400 P500\n M973 S1\n G0 F6000 X228.500 Y4.750 Z0.000\n M960 S0 P1\n M973 S1\n M400 P800\n M971 S6 P0\n M973 S2 P0\n M400 P500\n G0 Z0.000 F12000\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P200\n M971 S5 P1\n M973 S2 P1\n M400 P500\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P3\n G0 Z0.500 F12000\n M960 S0 P0\n M960 S2 P1\n G0 X228.5 Y6.75\n M400 P200\n M971 S5 P4\n M973 S2 P0\n M400 P500\n M960 S0 P0\n M960 S1 P1\n G0 X215.00 Y4.750\n M400 P500\n M971 S5 P2\n M963 S1\n M400 P1500\n M964\n T1100\n G1 Z3 F3000\n\n M400\n M500 ; save cali data\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_extruder]} ; rise nozzle temp now ,to reduce temp waiting time.\n\n T1100\n M400 P400\n M960 S0 P0\n G0 F30000.000 Y10.000 X65.000 Z0.000\n M400 P400\n M960 S1 P1\n M400 P50\n\n M969 S1 N3 A2000\n G0 F360.000 X181.000 Z0.000\n M980.3 A70.000 B{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60/4} C5.000 D{outer_wall_volumetric_speed/(1.75*1.75/4*3.14)*60} E5.000 F175.000 H1.000 I0.000 J0.010 K0.020\n M400 P100\n G0 F20000\n G0 Z1 ; rise nozzle up\n T1000 ; change to nozzle space\n G0 X45.000 Y4.000 F30000 ; move to test line pos\n M969 S0 ; turn off scanning\n M960 S0 P0\n\n\n G1 Z2 F20000\n T1000\n G0 X45.000 Y4.000 F30000 E0\n M109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\n G0 Z0.3\n G1 F1500.000 E3.600\n G1 X65.000 E2.4945 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X70.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X75.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X80.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X85.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X90.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X95.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X100.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X105.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X110.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X115.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X120.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X125.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X130.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X135.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n\n ; see if extrude cali success, if not ,use default value\n M1002 judge_last_extrude_cali_success\n M622 J0\n M400\n M900 K0.01 M{outer_wall_volumetric_speed/(1.75*1.75/4*3.14) *0.01}\n M623\n\n G1 X140.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X145.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X150.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X155.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X160.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X165.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X170.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X175.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X180.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X185.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X190.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X195.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X200.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X205.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X210.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X215.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n G1 X220.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) / 4 * 60}\n G1 X225.000 E0.6236 F{outer_wall_volumetric_speed/(0.3*1.0) * 60}\n M973 S4\n\nM623\n\n;===== wait chamber temperature reaching the reference value =======\n{if (overall_chamber_temperature >= 40)}\nM104 S140\nM191 S[overall_chamber_temperature] ; wait for chamber temp\nM106 P2 S0 ; reset chamber fan cmd\nM109 S{nozzle_temperature[initial_no_support_extruder]}\n{endif}\n\n;========turn off light and wait extrude temperature =============\nM1002 gcode_claim_action : 0\nM973 S4 ; turn off scanner\nM400 ; wait all motion done before implement the emprical L parameters\n;M900 L500.0 ; Empirical parameters\nM109 S[nozzle_temperature_initial_layer]\nM960 S1 P0 ; turn off laser\nM960 S2 P0 ; turn off laser\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off big fan\nM106 P3 S0 ; turn off chamber fan\n\nM975 S1 ; turn on mech mode supression\nG90\nM83\nT1000\nG1 E{-retraction_length[initial_no_support_extruder]} F1800\nG1 X128.0 Y253.0 Z0.2 F24000.0;Move to start position\nG1 E{retraction_length[initial_no_support_extruder]} F1800\nM109 S{nozzle_temperature_initial_layer[initial_no_support_extruder]}\nG0 X253 E6.4 F{outer_wall_volumetric_speed/(0.3*0.6) * 60}\nG0 Y128 E6.4\nG0 X252.5\nG0 Y252.5 E6.4\nG0 X128 E6.4\n" + "type": "machine", + "name": "Bambu Lab X1E 0.8 nozzle", + "inherits": "Bambu Lab X1E 0.4 nozzle", + "from": "system", + "setting_id": "GM028", + "instantiation": "true", + "nozzle_diameter": [ + "0.8" + ], + "printer_model": "Bambu Lab X1E", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X1C 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL X1C 0.8 nozzle", + "include": [ + "Bambu Lab X1E 0.8 nozzle template machine_start_gcode" + ], + "max_layer_height": [ + "0.56" + ], + "min_layer_height": [ + "0.16" + ], + "retract_length_toolchange": [ + "3", + "3" + ], + "retraction_length": [ + "3", + "3" + ], + "upward_compatible_machine": [ + "Bambu Lab P1S 0.8 nozzle", + "Bambu Lab P1P 0.8 nozzle", + "Bambu Lab X1 0.8 nozzle", + "Bambu Lab X1 Carbon 0.8 nozzle", + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab X2D 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X1E.json b/resources/profiles/BBL/machine/Bambu Lab X1E.json index 0c4d6faf76..0880fc4f6e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X1E.json +++ b/resources/profiles/BBL/machine/Bambu Lab X1E.json @@ -1,13 +1,13 @@ { - "type": "machine_model", - "name": "Bambu Lab X1E", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "machine_tech": "FFF", - "model_id": "C13", - "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1E;Bambu ASA @BBL X1E;Bambu PC @BBL X1E;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PPA-CF @BBL X1E;Generic PPS @BBL X1E;Generic PPS-CF @BBL X1E;Bambu PETG HF @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab X1E", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "default_bed_type": "Textured PEI Plate", + "family": "BBL-3DP", + "machine_tech": "FFF", + "model_id": "C13", + "default_materials": "Bambu PLA Matte @BBL X1C;Bambu PLA Basic @BBL X1C;Bambu PLA-CF @BBL X1C;Bambu PETG-CF @BBL X1C;Bambu ABS @BBL X1E;Bambu ASA @BBL X1E;Bambu PC @BBL X1E;Bambu PAHT-CF @BBL X1C;Bambu Support For PLA @BBL X1C;Bambu Support For PA/PET @BBL X1C;Generic PPA-CF @BBL X1E;Generic PPS @BBL X1E;Generic PPS-CF @BBL X1E;Bambu PETG HF @BBL X1C;Bambu PLA Pure @BBL X1C;Bambu PLA Basic @BBL X1C 0.2 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.2 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.2 nozzle.json index ebb6a2f83c..1a4f6d9c3d 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.2 nozzle.json @@ -1,34 +1,333 @@ { - "type": "machine", - "name": "Bambu Lab X2D 0.2 nozzle", - "inherits": "Bambu Lab X2D 0.4 nozzle", - "from": "system", - "setting_id": "GM046", - "instantiation": "true", - "nozzle_diameter": [ - "0.2", - "0.2" - ], - "printer_model": "Bambu Lab X2D", - "printer_variant": "0.2", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X2D 0.2 nozzle" - ], - "default_print_profile": "0.10mm Standard @BBL X2D 0.2 nozzle", - "max_layer_height": [ - "0.14", - "0.14" - ], - "min_layer_height": [ - "0.04", - "0.04" - ], - "upward_compatible_machine": [ - "Bambu Lab A1 0.2 nozzle", - "Bambu Lab P2S 0.2 nozzle", - "Bambu Lab H2S 0.2 nozzle", - "Bambu Lab H2D 0.2 nozzle", - "Bambu Lab H2D Pro 0.2 nozzle", - "Bambu Lab H2C 0.2 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab X2D 0.2 nozzle", + "inherits": "Bambu Lab X2D 0.4 nozzle", + "from": "system", + "setting_id": "GM046", + "instantiation": "true", + "nozzle_diameter": [ + "0.2", + "0.2" + ], + "printer_model": "Bambu Lab X2D", + "printer_variant": "0.2", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X2D 0.2 nozzle" + ], + "default_print_profile": "0.10mm Standard @BBL X2D 0.2 nozzle", + "max_layer_height": [ + "0.14", + "0.14" + ], + "min_layer_height": [ + "0.04", + "0.04" + ], + "upward_compatible_machine": [ + "Bambu Lab A1 0.2 nozzle", + "Bambu Lab P2S 0.2 nozzle", + "Bambu Lab H2S 0.2 nozzle", + "Bambu Lab H2D 0.2 nozzle", + "Bambu Lab H2D Pro 0.2 nozzle", + "Bambu Lab H2C 0.2 nozzle", + "Bambu Lab A2L 0.2 nozzle" + ], + "deretraction_speed": [ + "30", + "30", + "20", + "20" + ], + "hotend_heating_rate": [ + "1.5", + "1.5", + "1.5", + "1.5" + ], + "retraction_length": [ + "0.8", + "0.8", + "2", + "2" + ], + "retraction_speed": [ + "30", + "30", + "20", + "20" + ], + "deretract_speed_extruder_change": [ + "30", + "30", + "90", + "90" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Bowden Standard,Bowden High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "retract_lift_below": [ + "254", + "254", + "254", + "254" + ], + "machine_max_acceleration_e": [ + "30000", + "5000", + "30000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "30000", + "5000", + "30000", + "5000", + "30000", + "5000", + "30000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "120", + "120", + "120", + "120" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "nozzle_volume": [ + "92", + "92", + "92", + "92" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "hotend_cooling_rate": [ + "2", + "2", + "2", + "2" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template change_filament_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template change_filament_gcode.json new file mode 100644 index 0000000000..77b94e6368 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template change_filament_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X2D 0.4 nozzle template change_filament_gcode", + "instantiation": "false", + "change_filament_gcode": ";======== X2D filament_change gcode ==========\n;===== 2026/07/01 =====\n\nM620 S[next_filament_id]A B H[next_hotend]\n;M204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_filament_id] == 0 || z_hop_types[current_filament_id] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.22 I[next_filament_id] P1 ; enable remote extruder runout auto purge.\n\nT[next_filament_id] H[next_hotend]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if filament_type[next_filament_id] == \"PA\"}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\nSYNC T{ceil(flush_length / 125) * 5}\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\n\nM400\n\nG1 Z{max_layer_z + 3.0} F3000\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\n\nM621 S[next_filament_id]A B\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM620.6 I[next_filament_id] H[next_hotend] W1 ;enable ams air printing detect\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;disable E air printing detect\n{endif}\n\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\n\nG1 Y256 F18000\n\n\n{if (overall_chamber_temperature < 40)}\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[next_filament_id])}\n M106 P2 S{first_x_layer_fan_speed[next_filament_id]*255.0/100.0 };set first x_layer fan\n\tM106 P10 S{first_x_layer_fan_speed[next_filament_id]*255.0/100.0 };set first x_layer fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[next_filament_id] && additional_fan_full_speed_layer[next_filament_id] > close_additional_fan_first_x_layers[next_filament_id])}\n M106 P2 S{(first_x_layer_fan_speed[next_filament_id] + (additional_cooling_fan_speed[next_filament_id] - first_x_layer_fan_speed[next_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[next_filament_id]) / max(additional_fan_full_speed_layer[next_filament_id] - close_additional_fan_first_x_layers[next_filament_id], 1)) * 255.0/100.0}\n\tM106 P10 S{(first_x_layer_fan_speed[next_filament_id] + (additional_cooling_fan_speed[next_filament_id] - first_x_layer_fan_speed[next_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[next_filament_id]) / max(additional_fan_full_speed_layer[next_filament_id] - close_additional_fan_first_x_layers[next_filament_id], 1)) * 255.0/100.0}\n{else}\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R40 S45 U{max_additional_fan/100.0} V0.5 O50; set third-party PETG chamber \n {else}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R45 S50 U{max_additional_fan/100.0} V0.5 O50; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R50 S55 U{max_additional_fan/100.0} V0.5 O55; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{endif}\n{endif}\n;not set fan changing filament" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template layer_change_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template layer_change_gcode.json new file mode 100644 index 0000000000..7ce70c4556 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template layer_change_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X2D 0.4 nozzle template layer_change_gcode", + "instantiation": "false", + "layer_change_gcode": ";======== X2D layer_change gcode ==========\n;===== 2026/07/01 =====\n\n{if (layer_num + 1 == 1)}\n{if (overall_chamber_temperature >= 40)}\n ;not reset filter fan in first layer\n ;not reset fan\n{endif}\n{endif}\n\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n\tM106 P10 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[current_filament_id] && additional_fan_full_speed_layer[current_filament_id] > close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n\tM106 P10 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 == max(close_additional_fan_first_x_layers[current_filament_id] + 1, additional_fan_full_speed_layer[current_filament_id]))}\n{if (overall_chamber_temperature < 40)}\n ;updata chamber autocooling in Xth layer\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R40 S45 U{max_additional_fan/100.0} V0.5 O50; set third-party PETG chamber \n {else}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R45 S50 U{max_additional_fan/100.0} V0.5 O50; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R50 S55 U{max_additional_fan/100.0} V0.5 O55; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{else}\n ;not reset filter fan in Xth layer\n{endif}\n;not reset fan\n{endif}\n\n\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template machine_end_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template machine_end_gcode.json new file mode 100644 index 0000000000..de16a36421 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template machine_end_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X2D 0.4 nozzle template machine_end_gcode", + "instantiation": "false", + "machine_end_gcode": ";======== X2D end gcode ==========\n;===== 2026/05/18 =====\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nM140 S0 ; turn off bed\nM141 S0 ; turn off chamber heating\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P10 S0 ; turn off remote part1 cooling fan\n\n; pull back filament to AMS\nM620 S65279 B\n; M620.11 P1 L0 I65279 E-3\nT65279\nG150.1 F8000\nM621 S65279 B\n\nM620 S65535 B\n; M620.11 P1 L0 I65535 E-4\nT65535\nG150.1 F8000\nM621 S65535 B\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (80.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 80.0 - max_layer_z/2) < 256}\n G1 Z{max_layer_z + 80.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 78.0 - max_layer_z/2}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 256}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.3 S0 ;disable clog detect\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P10 S255\nM400 S180\nM106 P10 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S255\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L50 C48 D10 M50 E48 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L50 C60 D10 M50 E60 F10 N50 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template machine_start_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template machine_start_gcode.json new file mode 100644 index 0000000000..bc81e16c86 --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template machine_start_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X2D 0.4 nozzle template machine_start_gcode", + "instantiation": "false", + "machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== X2D start gcode==========\n;===== 2026/06/05 =====\n\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n ;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50\nM1006 W\n;=====printer start sound ===================\n\n M1012.1 T1100\n M620 M ;enable remap\n M622.1 S0\n G383.4\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n;===== reset machine status =================\n\n;==== set airduct mode ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S0 ; turn off auxiliary fan\nM106 P10 S255 ; turn on filter fan\n{else}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P10 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\n;M140 S0 ; stop heatbed from heating\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on auxiliary fan\nM106 P10 S102 ; turn on chamber fan\nM142 P6 R30 S40 U0.6 V0.8 ; set PLA/TPU/PETG exhaust chamber autocooling\n{endif}\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n;===== set chamber temperature ==========\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300 R\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n M972 S26 P0 C0\n G90\n M83\n G1 Y128 F30000\n G1 X128\n G28 Z P0 T400\n M400\n;===== first homign end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n\n M104 S0 T0\n M104 S0 T1\n M562 P1 E0 B1\n M562 P2 E0 B1\n M18 E\n M400 P200\n M1028 S1\n M972 S19 P0 ;heatbed detection\n M972 S31 P0 ;toolhead camera dirt detection\n M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 ;print plate deviation detection\n M1028 S0\n M562 P1 E1 B1\n M562 P2 E1 B1\n M17 D\n\n ;M400\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\n {if max_print_z >= 145}\n G151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-40} A ; rise temp in advance\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\n M620.11 P0 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] E0\n M620.11 K0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R0\n\n M620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] B ; switch material if AMS exist\n M620.22 I[initial_no_support_filament_id] P1 ; enable remote extruder runout auto purge.\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_filament_id] H[initial_no_support_hotend]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M621 S[initial_no_support_filament_id]A B\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n;===== prepare print temperature and material ==========\n\n;===== auto extrude cali start =========================\n M975 S1\n M1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n;===== auto extrude cali end =========================\n\n {if hold_chamber_temp_for_flat_print}\n G150.3\n M1002 gcode_claim_action : 58\n M104 S{first_layer_temperature[initial_no_support_filament_id]}\n {if bed_temperature_initial_layer_single > 89}\n {if overall_chamber_temperature < 40}\n M1030 S1200\n SYNC R0 T1200\n {else}\n M1030 S600\n SYNC R0 T600\n {endif}\n {else}\n M1030 S300\n SYNC R0 T300\n {endif}\n M1030 C\n {endif}\n\n {if filament_type[initial_filament_id] == \"TPU\" || filament_type[initial_filament_id] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n G150.2\n G150.1 F8000\n G150.2\n G150.1 F8000\n\n G91\n G1 Y-16 F12000 ; move away from the trash bin\n G90\n M400\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A\n\n;===== wipe right nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n;===== wipe left nozzle end =====\n\n{if filament_type[initial_filament_id] == \"PC\"}\n M109 S170 A\n{else}\n M109 S140 A\n{endif}\n M106 S0 ; turn off fan , too noisy\n G91\n G1 Z5 F1200\n G90\n M400\n G150.1\n\n{if (overall_chamber_temperature >= 40)}\nM1002 gcode_claim_action : 49\nM191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\n;===== z ofst cali start =====\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n G383 O0 M1 T140\n M400\n;===== z ofst cali end =====\nG90\nM83\nG0 Y200 F18000\n\n;===== bed leveling ==================================\n M1002 gcode_claim_action : 54\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n M109 S140 A\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H R\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\n M623\n\n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H R\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\n M623\n\n M622 J0\n G28 R\n M623\n G29.2 S1\n;===== bed leveling end ================================\n\n; cali eddy z pos\n;G383.13 T1 C1\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} A\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 X128 Y128 F20000\n G1 Z5 F1200\n M400 P200\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n M970.3 Q0 A7 K0 O1\n M970.2 Q0 W73 K1 Z0.01\n M974 Q0 S2 P0\n M975 S1\n M400\n;===== mech mode sweep end =====\n\nM104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\nG150.3\n\n;===== xy ofst cali start =====\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\n M104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\n\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n M140 S[bed_temperature_initial_layer_single]\n M190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n\n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n M983.4 S0 ; turn off deformation compensation\n\n;============switch again==================\n M211 X0 Y0 Z0 ;turn off soft endstop\n G91\n G1 Z6 F1200\n G90\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] B\n M620.22 I[initial_no_support_filament_id] P1 ; enable remote extruder runout auto purge.\n M400\n T[initial_no_support_filament_id] H[initial_no_support_hotend]\n M400\n M628 S0\n M629\n M400\n M621 S[initial_no_support_filament_id]A B\n;============switch again==================\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if bed_temperature_initial_layer_single > 70}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.003} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.017}\n {endif}\n {else}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{0.002} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.022}\n {endif}\n {endif}\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n G0 X100 Y0 F24000\n M400\n ;G130 O0 X100 Y-0.4 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E20 D5\n G130 O0 X100 Y-0.2 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E12 D4\nG90\n G90\n M83\n G1 Z1\n M400\n;===== noozle load line end ===========================\nM1002 gcode_claim_action : 0\n G29.99\n\n;M993 A1 B1 C1 ; nozzle cam detection allowed.\n\nM620.6 I[initial_no_support_filament_id] H[initial_no_support_hotend] W1 ;enable ams air printing detect\n\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template time_lapse_gcode.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template time_lapse_gcode.json new file mode 100644 index 0000000000..6597ef120c --- /dev/null +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle template time_lapse_gcode.json @@ -0,0 +1,6 @@ +{ + "type": "machine", + "name": "Bambu Lab X2D 0.4 nozzle template time_lapse_gcode", + "instantiation": "false", + "time_lapse_gcode": ";======== X2D timelapse gcode ========\n;======== 2026/06/03 ========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\n\nM622 J1\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {elsif has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G91\n G0 Y-20 F18000\n G90\n M83\n {endif}\n {endif}\nM623\n; SKIPPABLE_END\n" +} diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle.json index 0c79b7fed0..e381fbdbee 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.4 nozzle.json @@ -1,157 +1,470 @@ { - "type": "machine", - "name": "Bambu Lab X2D 0.4 nozzle", - "inherits": "fdm_bbl_3dp_002_common", - "from": "system", - "setting_id": "GM045", - "instantiation": "true", - "change_filament_gcode": "======== X2D filament_change gcode ==========\n;===== 2026/07/01 =====\n\nM620 S[next_filament_id]A B H[next_hotend]\n;M204 S9000\n{if toolchange_count > 1 && (z_hop_types[current_filament_id] == 0 || z_hop_types[current_filament_id] == 3)}\nG17\nG2 Z{z_after_toolchange + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\n{endif}\n\n;nozzle_change_gcode\n\nG1 Z{max_layer_z + 3.0} F1200\n\nM400\nM106 P1 S0\n\n{if toolchange_count == 2}\n; get travel path for change filament\n;M620.1 X[travel_point_1_x] Y[travel_point_1_y] F21000 P0\n;M620.1 X[travel_point_2_x] Y[travel_point_2_y] F21000 P1\n;M620.1 X[travel_point_3_x] Y[travel_point_3_y] F21000 P2\n{endif}\n\n{if ((filament_type[current_filament_id] == \"PLA\") || (filament_type[current_filament_id] == \"PLA-CF\") || (filament_type[current_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[current_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[current_nozzle_id]} T{flush_temperatures[current_filament_id]} P[old_filament_temp] S1\n{endif}\n\n{if ((filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[next_nozzle_id] == 0.2)}\nM620.10 A1 F74.8347 L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{else}\nM620.10 A1 F{flush_volumetric_speeds[next_filament_id]/2.4053*60} L[flush_length] H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} T{flush_temperatures[next_filament_id]} P[new_filament_temp] S1\n{endif}\n\nM620.15 C{new_filament_temp - filament_cooling_before_tower[next_filament_id]}\n\n{if long_retraction_when_cut}\nM620.11 P1 L0 I[current_filament_id] B[current_hotend] E-{retraction_distance_when_cut} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 P0 L0 I[current_filament_id] B[current_hotend] E0\n{endif}\n\n{if long_retraction_when_ec}\nM620.11 K1 I[current_filament_id] B[current_hotend] R{retraction_distance_when_ec} F{max((flush_volumetric_speeds[current_filament_id]/2.4053*60), 200)}\n{else}\nM620.11 K0 I[current_filament_id] B[current_hotend] R0\n{endif}\n\nM620.22 I[next_filament_id] P1 ; enable remote extruder runout auto purge.\n\nT[next_filament_id] H[next_hotend]\n\n;deretract\n{if filament_type[next_filament_id] == \"TPU\"}\n{else}\n{if filament_type[next_filament_id] == \"PA\"}\n;VG1 E1 F{max(new_filament_e_feedrate, 200)}\n;VG1 E1 F{max(new_filament_e_feedrate/2, 100)}\n{else}\n;VG1 E4 F{max(new_filament_e_feedrate, 200)}\n;VG1 E4 F{max(new_filament_e_feedrate/2, 100)}\n{endif}\n{endif}\n\n; VFLUSH_START\n{if flush_length>41.5}\n;VG1 E41.5 F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n;VG1 E{flush_length-41.5} F{new_filament_e_feedrate}\n{else}\n;VG1 E{flush_length} F{min(old_filament_e_feedrate,new_filament_e_feedrate)}\n{endif}\nSYNC T{ceil(flush_length / 125) * 5}\n; VFLUSH_END\n\nM1002 set_filament_type:{filament_type[next_filament_id]}\n\nM400\nM83\n{if next_filament_id < 255}\nM620.10 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM628 S0\n;VM109 S[new_filament_temp]\nM629\nM400\n\n;prime_tower_interface\n{if is_prime_tower_interface && filament_tower_interface_purge_volume !=0}\nG150.1\nM620.13 W0 L{filament_tower_interface_purge_volume} T{filament_tower_interface_print_temp} R0.0\n{endif}\n;prime_tower_interface\n\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\n\nM400\n\nG1 Z{max_layer_z + 3.0} F3000\n\n{else}\nG1 X[x_after_toolchange] Y[y_after_toolchange] Z[z_after_toolchange] F12000\n{endif}\n\n\nM621 S[next_filament_id]A B\n\nM622.1 S0 ;for prev version, default skip\nM1002 judge_flag powerloss_resume_flag\nM622 J1\nM983.3 F{filament_max_volumetric_speed[next_filament_id]/2.4} A0.4 R{retract_length_toolchange[filament_map[next_filament_id]-1]}\nM400\nG1 Z{max_layer_z + 3.0} F3000\nM1002 set_flag powerloss_resume_flag=0\nM623\n\nM620.6 I[next_filament_id] H[next_hotend] W1 ;enable ams air printing detect\n\n{if (filament_type[next_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[next_filament_id] == \"PLA\") || (filament_type[next_filament_id] == \"PETG\")\n || (filament_type[next_filament_id] == \"PLA-CF\") || (filament_type[next_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[next_nozzle_id]} ;disable E air printing detect\n{endif}\n\n{if layer_z <= (initial_layer_print_height + 0.001)}\nM204 S[initial_layer_acceleration]\n{else}\nM204 S[travel_acceleration]\n{endif}\n\nG1 Y256 F18000\n\n\n{if (overall_chamber_temperature < 40)}\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[next_filament_id])}\n M106 P2 S{first_x_layer_fan_speed[next_filament_id]*255.0/100.0 };set first x_layer fan\n\tM106 P10 S{first_x_layer_fan_speed[next_filament_id]*255.0/100.0 };set first x_layer fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[next_filament_id] && additional_fan_full_speed_layer[next_filament_id] > close_additional_fan_first_x_layers[next_filament_id])}\n M106 P2 S{(first_x_layer_fan_speed[next_filament_id] + (additional_cooling_fan_speed[next_filament_id] - first_x_layer_fan_speed[next_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[next_filament_id]) / max(additional_fan_full_speed_layer[next_filament_id] - close_additional_fan_first_x_layers[next_filament_id], 1)) * 255.0/100.0}\n\tM106 P10 S{(first_x_layer_fan_speed[next_filament_id] + (additional_cooling_fan_speed[next_filament_id] - first_x_layer_fan_speed[next_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[next_filament_id]) / max(additional_fan_full_speed_layer[next_filament_id] - close_additional_fan_first_x_layers[next_filament_id], 1)) * 255.0/100.0}\n{else}\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R40 S45 U{max_additional_fan/100.0} V0.5 O50; set third-party PETG chamber \n {else}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R45 S50 U{max_additional_fan/100.0} V0.5 O50; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R50 S55 U{max_additional_fan/100.0} V0.5 O55; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{endif}\n{endif}\n;not set fan changing filament", - "layer_change_gcode": ";======== X2D layer_change gcode ==========\n;===== 2026/07/01 =====\n\n{if (layer_num + 1 == 1)}\n{if (overall_chamber_temperature >= 40)}\n ;not reset filter fan in first layer\n ;not reset fan\n{endif}\n{endif}\n\n{if (layer_num + 1 <= close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n\tM106 P10 S{first_x_layer_fan_speed[current_filament_id]*255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 < additional_fan_full_speed_layer[current_filament_id] && additional_fan_full_speed_layer[current_filament_id] > close_additional_fan_first_x_layers[current_filament_id])}\n{if (overall_chamber_temperature < 40)}\n M106 P2 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n\tM106 P10 S{(first_x_layer_fan_speed[current_filament_id] + (additional_cooling_fan_speed[current_filament_id] - first_x_layer_fan_speed[current_filament_id]) * (layer_num + 1 - close_additional_fan_first_x_layers[current_filament_id]) / max(additional_fan_full_speed_layer[current_filament_id] - close_additional_fan_first_x_layers[current_filament_id], 1)) * 255.0/100.0}\n{endif}\n;not reset fan\n{elsif (layer_num + 1 == max(close_additional_fan_first_x_layers[current_filament_id] + 1, additional_fan_full_speed_layer[current_filament_id]))}\n{if (overall_chamber_temperature < 40)}\n ;updata chamber autocooling in Xth layer\n {if (min_vitrification_temperature <= 50)}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.2 chamber autocooling\n {else}\n M142 P1 R30 S40 U{max_additional_fan/100.0} V1.0 O45; set PLA/TPU ND0.4 chamber autocooling\n {endif}\n {else}\n {if (!is_all_bbl_filament)}\n M142 P1 R40 S45 U{max_additional_fan/100.0} V0.5 O50; set third-party PETG chamber \n {else}\n {if (nozzle_diameter_at_nozzle_id[current_nozzle_id] == 0.2)}\n M142 P1 R45 S50 U{max_additional_fan/100.0} V0.5 O50; set PETG ND0.2 chamber autocooling\n {else}\n M142 P1 R50 S55 U{max_additional_fan/100.0} V0.5 O55; set PETG ND0.4 chamber autocooling\n {endif}\n {endif}\n {endif}\n{else}\n ;not reset filter fan in Xth layer\n{endif}\n;not reset fan\n{endif}\n\n\n; update layer progress\nM73 L{layer_num+1}\nM991 S0 P{layer_num} ;notify layer change\n", - "machine_end_gcode": ";======== X2D end gcode ==========\n;===== 2026/05/18 =====\n\nM400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nM211 Z1\n\nG90\nG1 Z{max_layer_z + 0.4} F900 ; lower z a little\nM1002 judge_flag timelapse_record_flag\nM622 J1\n G150.3\n M400 ; wait all motion done\n M991 S0 P-1 ;end smooth timelapse at safe pos\n M400 S5 ;wait for last picture to be taken\nM623 ;end of \"timelapse_record_flag\"\n\nG90\nG1 Z{max_layer_z + 10} F900 ; lower z a little\n\nM140 S0 ; turn off bed\nM141 S0 ; turn off chamber heating\nM106 S0 ; turn off fan\nM106 P2 S0 ; turn off remote part cooling fan\nM106 P3 S0 ; turn off chamber cooling fan\nM106 P10 S0 ; turn off remote part1 cooling fan\n\n; pull back filament to AMS\nM620 S65279 B\n; M620.11 P1 L0 I65279 E-3\nT65279\nG150.1 F8000\nM621 S65279 B\n\nM620 S65535 B\n; M620.11 P1 L0 I65535 E-4\nT65535\nG150.1 F8000\nM621 S65535 B\n\nG150.3\n\nM104 S0 T0; turn off hotend\nM104 S0 T1; turn off hotend\n\nM400 ; wait all motion done\nM17 S\nM17 Z0.4 ; lower z motor current to reduce impact if there is something in the bottom\n{if (80.0 - max_layer_z/2) > 0}\n {if (max_layer_z + 80.0 - max_layer_z/2) < 256}\n G1 Z{max_layer_z + 80.0 - max_layer_z/2} F600\n G1 Z{max_layer_z + 78.0 - max_layer_z/2}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{else}\n {if (max_layer_z + 4.0) < 256}\n G1 Z{max_layer_z + 4.0} F600\n G1 Z{max_layer_z + 2.0}\n {else}\n G1 Z256 F600\n G1 Z256\n {endif}\n{endif}\nM400 P100\nM17 R ; restore z current\n\nM220 S100 ; Reset feedrate magnitude\nM201.2 K1.0 ; Reset acc magnitude\nM73.2 R1.0 ;Reset left time magnitude\nM1002 set_gcode_claim_speed_level : 0\n\nM1015.3 S0 ;disable clog detect\nM1015.4 S0 K0 ;disable air printing detect\n\n;=====printer finish air purification=========\nM622.1 S0\nM1002 judge_flag print_finish_air_filt_flag\n\nM622 J1\nM1002 gcode_claim_action : 66\nM145 P1\nM106 P10 S255\nM400 S180\nM106 P10 S0\nM623\n\nM622 J2\nM1002 gcode_claim_action : 66\nM145 P0\nM106 P3 S255\nM400 S180\nM106 P3 S0\nM623\n;=====printer finish air purification=========\n\n;=====printer finish sound=========\nM17\nM400 S1\nM1006 S1\nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A53 B10 L50 C53 D10 M50 E53 F10 N50 \nM1006 A57 B10 L50 C57 D10 M50 E57 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A48 B10 L50 C48 D10 M50 E48 F10 N50 \nM1006 A0 B15 L0 C0 D15 M0 E0 F15 N0 \nM1006 A60 B10 L50 C60 D10 M50 E60 F10 N50 \nM1006 W\n;=====printer finish sound=========\nM400\nM18\n\n", - "machine_start_gcode": ";M1002 set_flag extrude_cali_flag=1\n;M1002 set_flag g29_before_print_flag=1\n;M1002 set_flag auto_cali_toolhead_offset_flag=1\n;M1002 set_flag build_plate_detect_flag=1\n\n;======== X2D start gcode==========\n;===== 2026/06/05 =====\n\n M140 S[bed_temperature_initial_layer_single] ; heat heatbed first\n M993 A0 B0 C0 ; nozzle cam detection not allowed.\n M400\n ;M73 P99\n\n;=====printer start sound ===================\nM17\nM400 S1\nM1006 S1\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B9 L50 C61 D9 M50 E61 F9 N50\nM1006 A53 B9 L50 C53 D9 M50 E53 F9 N50\nM1006 A56 B9 L50 C56 D9 M50 E56 F9 N50\nM1006 A61 B18 L50 C61 D18 M50 E61 F18 N50\nM1006 W\n;=====printer start sound ===================\n\n M1012.1 T1100\n M620 M ;enable remap\n M622.1 S0\n G383.4\n\n;===== avoid end stop =================\n G91\n G380 S2 Z22 F1200\n G380 S2 Z-12 F1200\n G90\n;===== avoid end stop =================\n\n;===== reset machine status =================\n M204 S10000\n M630 S0 P1\n G90\n M17 D ; reset motor current to default\n M960 S5 P1 ; turn on logo lamp\n M220 S100 ;Reset Feedrate\n M1002 set_gcode_claim_speed_level: 5\n M221 S100 ;Reset Flowrate\n M73.2 R1.0 ;Reset left time magnitude\n G29.1 Z{+0.0} ; clear z-trim value first\n M983.1 M1\n M982.2 S1 ; turn on cog noise reduction\n;===== reset machine status =================\n\n;==== set airduct mode ====\n{if (overall_chamber_temperature >= 40)}\nM145 P1 ; set airduct mode to heating mode for heating\nM106 P2 S0 ; turn off auxiliary fan\nM106 P10 S255 ; turn on filter fan\n{else}\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P10 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\n;M140 S0 ; stop heatbed from heating\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on auxiliary fan\nM106 P10 S102 ; turn on chamber fan\nM142 P6 R30 S40 U0.6 V0.8 ; set PLA/TPU/PETG exhaust chamber autocooling\n{endif}\n;==== set airduct mode ====\n\n;===== start to heat heatbed & hotend==========\n M1002 gcode_claim_action : 2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n\n ;===== set chamber temperature ==========\n {if (overall_chamber_temperature >= 40)}\n M145 P1 ; set airduct mode to heating mode\n M141 S[overall_chamber_temperature] ; Let Chamber begin to heat\n {endif}\n;===== set chamber temperature ==========\n\n G29.2 S0 ; avoid invalid abl data\n\n;===== first homing start =====\n M1002 gcode_claim_action : 13\n G28 X T300 R\n G150.1 F8000 ; wipe mouth to avoid filament stick to heatbed\n G150.3\n M972 S24 P0\n M1002 gcode_claim_action : 74 ; Heatbed surface foreign object detection\n M972 S26 P0 C0\n G90\n M83\n G1 Y128 F30000\n G1 X128\n G28 Z P0 T400\n M400\n;===== first homign end =====\n\n;===== detection start =====\n M1002 gcode_claim_action : 11\n\n M104 S0 T0\n M104 S0 T1\n M562 P1 E0 B1\n M562 P2 E0 B1\n M18 E\n M400 P200\n M1028 S1\n M972 S19 P0 ;heatbed detection\n M972 S31 P0 ;toolhead camera dirt detection\n M1002 gcode_claim_action : 73 ; Build plate alignment detection\n M972 S34 P0 ;print plate deviation detection\n M1028 S0\n M562 P1 E1 B1\n M562 P2 E1 B1\n M17 D\n\n ;M400\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} T{filament_map[initial_no_support_filament_id] % 2} ; rise temp in advance\n\n {if max_print_z >= 145}\n G151 P{filament_map[initial_no_support_filament_id] % 2} M ; plug the heat nozzle\n M1002 gcode_claim_action : 75 ; Detect obstacles at the botton of the heated bed\n G3811 Z{max_print_z} ; Detect obstacles at the bottom of the heated bed\n {endif}\n;===== detection end =====\n\n;===== prepare print temperature and material ==========\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-40} A ; rise temp in advance\n M400\n M211 X0 Y0 Z0 ;turn off soft endstop\n M975 S1 ; turn on input shaping\n\n G29.2 S0 ; avoid invalid abl data\n G150.3\n{if ((filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG\")) && (nozzle_diameter_at_nozzle_id[initial_nozzle_id] == 0.2)}\nM620.10 A0 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F74.8347 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{else}\nM620.10 A0 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\nM620.10 A1 F{flush_volumetric_speeds[initial_no_support_filament_id]/2.4053*60} H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} T{flush_temperatures[initial_no_support_filament_id]} P{nozzle_temperature_initial_layer[initial_no_support_filament_id]} S1\n{endif}\n\n M620.11 P0 L0 I[initial_no_support_filament_id] B[initial_no_support_hotend] E0\n M620.11 K0 I[initial_no_support_filament_id] B[initial_no_support_hotend] R0\n\n M620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] B ; switch material if AMS exist\n M620.22 I[initial_no_support_filament_id] P1 ; enable remote extruder runout auto purge.\n M1002 gcode_claim_action : 4\n M1002 set_filament_type:UNKNOWN\n M400\n T[initial_no_support_filament_id] H[initial_no_support_hotend]\n M400\n M628 S0\n M629\n M400\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M621 S[initial_no_support_filament_id]A B\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n M106 P1 S0\n M400\n G29.2 S1\n;===== prepare print temperature and material ==========\n\n;===== auto extrude cali start =========================\n M975 S1\n M1002 judge_flag extrude_cali_flag\n M622 J0\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M623\n\n M622 J1\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n\n M622 J2\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M1002 gcode_claim_action : 8\n M109 S{nozzle_temperature[initial_no_support_filament_id]}\n G90\n M83\n M983.3 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2.4} A0.4 ; cali dynamic extrusion compensation\n M400\n M106 P1 S255\n M400 S5\n M106 P1 S0\n G150.3\n M623\n;===== auto extrude cali end =========================\n\n {if hold_chamber_temp_for_flat_print}\n G150.3\n M1002 gcode_claim_action : 58\n M104 S{first_layer_temperature[initial_no_support_filament_id]}\n {if bed_temperature_initial_layer_single > 89}\n {if overall_chamber_temperature < 40}\n M1030 S1200\n SYNC R0 T1200\n {else}\n M1030 S600\n SYNC R0 T600\n {endif}\n {else}\n M1030 S300\n SYNC R0 T300\n {endif}\n M1030 C\n {endif}\n\n {if filament_type[initial_filament_id] == \"TPU\" || filament_type[initial_filament_id] == \"PVA\"}\n {else}\n M83\n G1 E-3 F1800\n M400 P500\n {endif}\n G150.2\n G150.1 F8000\n G150.2\n G150.1 F8000\n\n G91\n G1 Y-16 F12000 ; move away from the trash bin\n G90\n M400\n\n M104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]-80} A\n\n;===== wipe right nozzle start =====\n M1002 gcode_claim_action : 14\n G150 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n M400\n;===== wipe left nozzle end =====\n\n{if filament_type[initial_filament_id] == \"PC\"}\n M109 S170 A\n{else}\n M109 S140 A\n{endif}\n M106 S0 ; turn off fan , too noisy\n G91\n G1 Z5 F1200\n G90\n M400\n G150.1\n\n{if (overall_chamber_temperature >= 40)}\nM1002 gcode_claim_action : 49\nM191 S[overall_chamber_temperature] ; wait for chamber temp\n{endif}\n\n;===== z ofst cali start =====\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n G383 O0 M1 T140\n M400\n;===== z ofst cali end =====\nG90\nM83\nG0 Y200 F18000\n\n;===== bed leveling ==================================\n M1002 gcode_claim_action : 54\n M190 S[bed_temperature_initial_layer_single]; ensure bed temp\n M109 S140 A\n M106 S0 ; turn off fan , too noisy\n M1002 judge_flag g29_before_print_flag\n M622 J1\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H R\n {else}\n G29 A1 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\n M623\n\n M622 J2\n M1002 gcode_claim_action : 1\n {if hold_chamber_temp_for_flat_print}\n G29 H R\n {else}\n G29 A2 X{first_layer_print_min[0]} Y{first_layer_print_min[1]} I{first_layer_print_size[0]} J{first_layer_print_size[1]} R\n {endif}\n M400\n M623\n\n M622 J0\n G28 R\n M623\n G29.2 S1\n;===== bed leveling end ================================\n\n; cali eddy z pos\n;G383.13 T1 C1\n\nM104 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]} A\n;===== mech mode sweep start =====\n M1002 gcode_claim_action : 3\n G90\n G1 X128 Y128 F20000\n G1 Z5 F1200\n M400 P200\n M970.3 Q1 A5 K0 O1\n M974 Q1 S2 P0\n M970.3 Q0 A7 K0 O1\n M970.2 Q0 W73 K1 Z0.01\n M974 Q0 S2 P0\n M975 S1\n M400\n;===== mech mode sweep end =====\n\nM104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\nG150.3\n\n;===== xy ofst cali start =====\nM1002 judge_flag auto_cali_toolhead_offset_flag\n\nM622 J0\n M1012.5 N1 R1\nM623\n\nM622 J1\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383 O1 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n\nM622 J2\n M1002 gcode_claim_action : 39\n M141 S0\n M620.17 T0 S{nozzle_temperature_initial_layer[(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))]} L{(first_non_support_filaments[0] != -1 ? first_non_support_filaments[0] : (first_filaments[0] != -1 ? first_filaments[0] : 0))}\n M620.17 T1 S{nozzle_temperature_initial_layer[(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))]} L{(first_non_support_filaments[1] != -1 ? first_non_support_filaments[1] : (first_filaments[1] != -1 ? first_filaments[1] : 0))}\n M620 D[initial_no_support_hotend]\n G383.3 T{nozzle_temperature_initial_layer[initial_no_support_filament_id]} L{initial_no_support_filament_id}\n M141 S[overall_chamber_temperature]\nM623\n;===== xy ofst cali end =====\n\n M104 S{nozzle_temperature_initial_layer[initial_filament_id]} A\n\n G150.3 ; move to garbage can to wait for temp\n\n;===== wait temperature reaching the reference value =======\n M140 S[bed_temperature_initial_layer_single]\n M190 S[bed_temperature_initial_layer_single]\n\n ;========turn off light and fans =============\n M960 S1 P0 ; turn off laser\n M960 S2 P0 ; turn off laser\n M106 S0 ; turn off cooling fan\n\n;===== wait temperature reaching the reference value =======\n\n M1002 gcode_claim_action : 255\n M400\n M975 S1 ; turn on mech mode supression\n M983.4 S0 ; turn off deformation compensation\n\n;============switch again==================\n M211 X0 Y0 Z0 ;turn off soft endstop\n G91\n G1 Z6 F1200\n G90\n M1002 set_filament_type:{filament_type[initial_no_support_filament_id]}\n M620 S[initial_no_support_filament_id]A H[initial_no_support_hotend] B\n M620.22 I[initial_no_support_filament_id] P1 ; enable remote extruder runout auto purge.\n M400\n T[initial_no_support_filament_id] H[initial_no_support_hotend]\n M400\n M628 S0\n M629\n M400\n M621 S[initial_no_support_filament_id]A B\n;============switch again==================\n\n;===== for Textured PEI Plate , lower the nozzle as the nozzle was touching topmost of the texture when homing ==\n {if bed_temperature_initial_layer_single > 70}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{-0.003} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.017}\n {endif}\n {else}\n {if curr_bed_type==\"Textured PEI Plate\"}\n G29.1 Z{0.002} ; for Textured PEI Plate\n {else}\n G29.1 Z{0.022}\n {endif}\n {endif}\n\n;===== nozzle load line ===============================\nM1002 gcode_claim_action : 51\n G29.2 S1 ; ensure z comp turn on\n G90\n M83\n M400 P50\n M500 D1\n M400 S3\n M109 S{nozzle_temperature_initial_layer[initial_no_support_filament_id]}\n G0 X100 Y0 F24000\n M400\n ;G130 O0 X100 Y-0.4 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E20 D5\n G130 O0 X100 Y-0.2 Z0.6 F{filament_max_volumetric_speed[initial_no_support_filament_id]/2/2.4053} L40 E12 D4\nG90\n G90\n M83\n G1 Z1\n M400\n;===== noozle load line end ===========================\nM1002 gcode_claim_action : 0\n G29.99\n\n;M993 A1 B1 C1 ; nozzle cam detection allowed.\n\nM620.6 I[initial_no_support_filament_id] H[initial_no_support_hotend] W1 ;enable ams air printing detect\n\n\n{if (filament_type[initial_no_support_filament_id] == \"TPU\")}\nM1015.3 S1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]};enable tpu clog detect\n{else}\nM1015.3 S0;disable tpu clog detect\n{endif}\n\n{if (filament_type[initial_no_support_filament_id] == \"PLA\") || (filament_type[initial_no_support_filament_id] == \"PETG\")\n || (filament_type[initial_no_support_filament_id] == \"PLA-CF\") || (filament_type[initial_no_support_filament_id] == \"PETG-CF\")}\nM1015.4 S1 K1 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;enable E air printing detect\n{else}\nM1015.4 S0 K0 H{nozzle_diameter_at_nozzle_id[initial_nozzle_id]} ;disable E air printing detect\n{endif}\n\n", - "time_lapse_gcode": ";======== X2D timelapse gcode ========\n;======== 2026/06/03 ========\n; SKIPPABLE_START\n; SKIPTYPE: timelapse\nM622.1 S1 ; for prev firware, default turned on\n\nM1002 judge_flag timelapse_record_flag\n\nM622 J1\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n M83\n G1 Z{max_layer_z + 0.4} F1200\n M400\n {endif}\n {endif}\n\n {if timelapse_inline_photo}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {elsif has_timelapse_safe_pos && !spiral_mode}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} U{timelapse_pos_x} V{timelapse_pos_y} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {else}\n {if spiral_mode}\n M971 S11 C10 O0\n M1004 S5 P1 ; external shutter\n {else}\n M9711 M{timelapse_type} E{most_used_physical_extruder_id} Z{layer_z + (farthest_point_timelapse_enabled ? 0.0 : 0.4)} S11 C10 O0 T3000\n {endif}\n {endif}\n\n {if !spiral_mode && !(has_timelapse_safe_pos) }\n {if most_used_physical_extruder_id!= curr_physical_extruder_id || timelapse_type == 1}\n G90\n G1 Z{max_layer_z + 3.0} F1200\n G91\n G0 Y-20 F18000\n G90\n M83\n {endif}\n {endif}\nM623\n; SKIPPABLE_END\n", - "nozzle_diameter": [ - "0.4", - "0.4" - ], - "printer_model": "Bambu Lab X2D", - "printer_variant": "0.4", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X2D 0.4 nozzle" - ], - "default_print_profile": "0.20mm Standard @BBL X2D", - "deretract_speed_extruder_change": [ - "30", - "30", - "90", - "90" - ], - "deretraction_speed": [ - "30", - "30", - "20", - "20" - ], - "enable_long_retraction_when_cut": "2", - "enable_pre_heating": "1", - "extruder_clearance_height_to_lid": "133", - "extruder_clearance_height_to_rod": "32.8", - "extruder_clearance_max_radius": "60", - "extruder_height_gap": "7", - "extruder_printable_area": [ - "0x0,256x0,256x256,0x256", - "20.5x0,256x0,256x256,20.5x256" - ], - "extruder_printable_height": [ - "261", - "256" - ], - "extruder_type": [ - "Direct Drive", - "Bowden" - ], - "extruder_variant_list": [ - "Direct Drive Standard,Direct Drive High Flow", - "Bowden Standard,Bowden High Flow" - ], - "fan_direction": "both", - "group_algo_with_time": "1", - "hotend_heating_rate": [ - "1.5", - "1.5", - "1.5", - "1.5" - ], - "machine_max_acceleration_e": [ - "30000", - "5000", - "30000", - "5000", - "5000", - "5000", - "5000", - "5000" - ], - "machine_max_acceleration_retracting": [ - "30000", - "5000", - "30000", - "5000", - "30000", - "5000", - "30000", - "5000" - ], - "machine_max_speed_e": [ - "30", - "30", - "30", - "30", - "120", - "120", - "120", - "120" - ], - "machine_max_speed_x": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "machine_max_speed_y": [ - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "printable_area": [ - "0x0", - "256x0", - "256x256", - "0x256 " - ], - "print_in_clockwise": "1", - "printable_height": "261", - "printer_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "retract_lift_below": [ - "254", - "254", - "254", - "254" - ], - "retraction_length": [ - "0.8", - "0.8", - "2", - "2" - ], - "retraction_speed": [ - "30", - "30", - "20", - "20" - ], - "support_chamber_temp_control": "1", - "support_air_filtration": "1", - "upward_compatible_machine": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab P2S 0.4 nozzle", - "Bambu Lab H2S 0.4 nozzle", - "Bambu Lab H2D 0.4 nozzle", - "Bambu Lab H2D Pro 0.4 nozzle", - "Bambu Lab H2C 0.4 nozzle" - ] + "type": "machine", + "name": "Bambu Lab X2D 0.4 nozzle", + "inherits": "fdm_bbl_3dp_002_common", + "from": "system", + "setting_id": "GM045", + "instantiation": "true", + "nozzle_diameter": [ + "0.4", + "0.4" + ], + "printer_model": "Bambu Lab X2D", + "farthest_point_timelapse": "1", + "printer_variant": "0.4", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X2D 0.4 nozzle" + ], + "default_print_profile": "0.20mm Standard @BBL X2D", + "deretract_speed_extruder_change": [ + "30", + "30", + "30", + "90", + "90", + "90" + ], + "deretraction_speed": [ + "30", + "30", + "30", + "20", + "20", + "20" + ], + "enable_long_retraction_when_cut": "2", + "enable_pre_heating": "1", + "extruder_clearance_height_to_lid": "133", + "extruder_clearance_height_to_rod": "32.8", + "extruder_clearance_max_radius": "60", + "extruder_height_gap": "7", + "extruder_printable_area": [ + "0x0,256x0,256x256,0x256", + "20.5x0,256x0,256x256,20.5x256" + ], + "extruder_printable_height": [ + "261", + "256" + ], + "extruder_type": [ + "Direct Drive", + "Bowden" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive E3D High Flow", + "Bowden Standard,Bowden High Flow,Bowden E3D High Flow" + ], + "fan_direction": "both", + "group_algo_with_time": "1", + "hotend_heating_rate": [ + "1.5", + "1.5", + "1.5", + "1.5", + "1.5", + "1.5" + ], + "include": [ + "Bambu Lab X2D 0.4 nozzle template machine_start_gcode", + "Bambu Lab X2D 0.4 nozzle template machine_end_gcode", + "Bambu Lab X2D 0.4 nozzle template layer_change_gcode", + "Bambu Lab X2D 0.4 nozzle template time_lapse_gcode", + "Bambu Lab X2D 0.4 nozzle template change_filament_gcode" + ], + "machine_max_acceleration_e": [ + "30000", + "5000", + "5000", + "30000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_retracting": [ + "30000", + "5000", + "5000", + "30000", + "5000", + "5000", + "30000", + "5000", + "5000", + "30000", + "5000", + "5000" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", + "120", + "120", + "120", + "120", + "120", + "120" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "printable_area": [ + "0x0", + "256x0", + "256x256", + "0x256 " + ], + "print_in_clockwise": "1", + "printable_height": "261", + "printer_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "retract_lift_below": [ + "254", + "254", + "254", + "254", + "254", + "254" + ], + "retraction_length": [ + "0.8", + "0.8", + "0.8", + "2", + "2", + "2" + ], + "retraction_speed": [ + "30", + "30", + "30", + "20", + "20", + "20" + ], + "support_chamber_temp_control": "1", + "upward_compatible_machine": [ + "Bambu Lab A1 0.4 nozzle", + "Bambu Lab P2S 0.4 nozzle", + "Bambu Lab H2S 0.4 nozzle", + "Bambu Lab H2D 0.4 nozzle", + "Bambu Lab H2D Pro 0.4 nozzle", + "Bambu Lab H2C 0.4 nozzle", + "Bambu Lab A2L 0.4 nozzle" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2", + "2", + "2" + ], + "wipe": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2", + "2", + "2" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%", + "0%", + "0%" + ], + "nozzle_volume": [ + "92", + "92", + "92", + "92", + "92", + "92" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "2", + "1", + "2", + "2" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20" + ], + "hotend_cooling_rate": [ + "2", + "2", + "2", + "2", + "2", + "2" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.6 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.6 nozzle.json index dc85dedc23..932559e5a2 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X2D 0.6 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.6 nozzle.json @@ -1,34 +1,35 @@ { - "type": "machine", - "name": "Bambu Lab X2D 0.6 nozzle", - "inherits": "Bambu Lab X2D 0.4 nozzle", - "from": "system", - "setting_id": "GM047", - "instantiation": "true", - "nozzle_diameter": [ - "0.6", - "0.6" - ], - "printer_model": "Bambu Lab X2D", - "printer_variant": "0.6", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X2D" - ], - "default_print_profile": "0.30mm Standard @BBL X2D 0.6 nozzle", - "max_layer_height": [ - "0.42", - "0.42" - ], - "min_layer_height": [ - "0.12", - "0.12" - ], - "upward_compatible_machine": [ - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab P2S 0.6 nozzle", - "Bambu Lab H2S 0.6 nozzle", - "Bambu Lab H2D 0.6 nozzle", - "Bambu Lab H2D Pro 0.6 nozzle", - "Bambu Lab H2C 0.6 nozzle" - ] + "type": "machine", + "name": "Bambu Lab X2D 0.6 nozzle", + "inherits": "Bambu Lab X2D 0.4 nozzle", + "from": "system", + "setting_id": "GM047", + "instantiation": "true", + "nozzle_diameter": [ + "0.6", + "0.6" + ], + "printer_model": "Bambu Lab X2D", + "printer_variant": "0.6", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X2D 0.6 nozzle" + ], + "default_print_profile": "0.30mm Standard @BBL X2D 0.6 nozzle", + "max_layer_height": [ + "0.42", + "0.42" + ], + "min_layer_height": [ + "0.12", + "0.12" + ], + "upward_compatible_machine": [ + "Bambu Lab A1 0.6 nozzle", + "Bambu Lab P2S 0.6 nozzle", + "Bambu Lab H2S 0.6 nozzle", + "Bambu Lab H2D 0.6 nozzle", + "Bambu Lab H2D Pro 0.6 nozzle", + "Bambu Lab H2C 0.6 nozzle", + "Bambu Lab A2L 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D 0.8 nozzle.json b/resources/profiles/BBL/machine/Bambu Lab X2D 0.8 nozzle.json index c6ddef3ac8..ffe98bd85e 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/machine/Bambu Lab X2D 0.8 nozzle.json @@ -1,34 +1,333 @@ { - "type": "machine", - "name": "Bambu Lab X2D 0.8 nozzle", - "inherits": "Bambu Lab X2D 0.4 nozzle", - "from": "system", - "setting_id": "GM048", - "instantiation": "true", - "nozzle_diameter": [ - "0.8", - "0.8" - ], - "printer_model": "Bambu Lab X2D", - "printer_variant": "0.8", - "default_filament_profile": [ - "Bambu PLA Basic @BBL X2D" - ], - "default_print_profile": "0.40mm Standard @BBL X2D 0.8 nozzle", - "max_layer_height": [ - "0.56", - "0.56" - ], - "min_layer_height": [ - "0.16", - "0.16" - ], - "upward_compatible_machine": [ - "Bambu Lab A1 0.8 nozzle", - "Bambu Lab P2S 0.8 nozzle", - "Bambu Lab H2S 0.8 nozzle", - "Bambu Lab H2D 0.8 nozzle", - "Bambu Lab H2D Pro 0.8 nozzle", - "Bambu Lab H2C 0.8 nozzle" - ] -} + "type": "machine", + "name": "Bambu Lab X2D 0.8 nozzle", + "inherits": "Bambu Lab X2D 0.4 nozzle", + "from": "system", + "setting_id": "GM048", + "instantiation": "true", + "nozzle_diameter": [ + "0.8", + "0.8" + ], + "printer_model": "Bambu Lab X2D", + "printer_variant": "0.8", + "default_filament_profile": [ + "Bambu PLA Basic @BBL X2D 0.8 nozzle" + ], + "default_print_profile": "0.40mm Standard @BBL X2D 0.8 nozzle", + "max_layer_height": [ + "0.56", + "0.56" + ], + "min_layer_height": [ + "0.16", + "0.16" + ], + "upward_compatible_machine": [ + "Bambu Lab A1 0.8 nozzle", + "Bambu Lab P2S 0.8 nozzle", + "Bambu Lab H2S 0.8 nozzle", + "Bambu Lab H2D 0.8 nozzle", + "Bambu Lab H2D Pro 0.8 nozzle", + "Bambu Lab H2C 0.8 nozzle", + "Bambu Lab A2L 0.8 nozzle" + ], + "deretraction_speed": [ + "30", + "30", + "20", + "20" + ], + "hotend_heating_rate": [ + "1.5", + "1.5", + "1.5", + "1.5" + ], + "retraction_length": [ + "0.8", + "0.8", + "2", + "2" + ], + "retraction_speed": [ + "30", + "30", + "20", + "20" + ], + "deretract_speed_extruder_change": [ + "30", + "30", + "90", + "90" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow", + "Bowden Standard,Bowden High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "2", + "2" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "retract_lift_below": [ + "254", + "254", + "254", + "254" + ], + "machine_max_acceleration_e": [ + "30000", + "5000", + "30000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "30000", + "5000", + "30000", + "5000", + "30000", + "5000", + "30000", + "5000" + ], + "machine_max_acceleration_travel": [ + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000", + "9000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3" + ], + "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", + "20", + "20" + ], + "machine_max_speed_y": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_x": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "120", + "120", + "120", + "120" + ], + "z_hop_types": [ + "Auto Lift", + "Auto Lift", + "Auto Lift", + "Auto Lift" + ], + "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "wipe_distance": [ + "2", + "2", + "2", + "2" + ], + "wipe": [ + "1", + "1", + "1", + "1" + ], + "retraction_minimum_travel": [ + "1", + "1", + "1", + "1" + ], + "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18" + ], + "retract_when_changing_layer": [ + "1", + "1", + "1", + "1" + ], + "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0" + ], + "retract_restart_extra": [ + "0", + "0", + "0", + "0" + ], + "retract_lift_above": [ + "0", + "0", + "0", + "0" + ], + "retract_length_toolchange": [ + "2", + "2", + "2", + "2" + ], + "retract_before_wipe": [ + "0%", + "0%", + "0%", + "0%" + ], + "nozzle_volume": [ + "92", + "92", + "92", + "92" + ], + "nozzle_flush_dataset": [ + "1", + "2", + "1", + "2" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ], + "hotend_cooling_rate": [ + "2", + "2", + "2", + "2" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/Bambu Lab X2D.json b/resources/profiles/BBL/machine/Bambu Lab X2D.json index 95e65f3b1e..ed32f5c7c9 100644 --- a/resources/profiles/BBL/machine/Bambu Lab X2D.json +++ b/resources/profiles/BBL/machine/Bambu Lab X2D.json @@ -1,18 +1,18 @@ { - "type": "machine_model", - "name": "Bambu Lab X2D", - "nozzle_diameter": "0.4;0.2;0.6;0.8", - "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", - "bed_model": "bbl-3dp-X1.stl", - "bed_texture": "bbl-3dp-logo.svg", - "image_bed_type": "n", - "bottom_texture_end_name": "n", - "bottom_texture_rect": "74,-10,148,12", - "default_bed_type": "Textured PEI Plate", - "family": "BBL-3DP", - "middle_texture_rect": "13,240,236.12,10", - "machine_tech": "FFF", - "model_id": "N6", - "not_support_bed_type": "Cool Plate", - "default_materials": "Bambu PLA Matte @BBL X2D;Bambu PLA Matte @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D;Bambu PLA Basic @BBL X2D 0.4 nozzle;Bambu TPU 95A @BBL X2D;Bambu TPU 95A @BBL X2D 0.4 nozzle;Generic TPU @BBL X2D;Generic TPU @BBL X2D 0.4 nozzle;Bambu PETG Basic @BBL X2D;Bambu PETG Basic @BBL X2D 0.4 nozzle;Bambu PETG HF @BBL X2D;Bambu PETG HF @BBL X2D 0.4 nozzle;Bambu ABS @BBL X2D;Bambu ABS @BBL X2D 0.4 nozzle;Bambu PC @BBL X2D;Bambu PC @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D 0.2 nozzle" -} + "type": "machine_model", + "name": "Bambu Lab X2D", + "nozzle_diameter": "0.4;0.2;0.6;0.8", + "url": "http://www.bambulab.com/Parameters/printer_model/Bambu Lab X1 Carbon.json", + "bed_model": "bbl-3dp-X1.stl", + "bed_texture": "bbl-3dp-logo.svg", + "image_bed_type": "n", + "bottom_texture_end_name": "n", + "bottom_texture_rect": "74,-10,148,12", + "default_bed_type": "Textured PEI Plate", + "family": "BBL-3DP", + "middle_texture_rect": "13,240,236.12,10", + "machine_tech": "FFF", + "model_id": "N6", + "not_support_bed_type": "Cool Plate", + "default_materials": "Bambu PLA Matte @BBL X2D;Bambu PLA Basic @BBL X2D 0.4 nozzle;Bambu TPU 95A @BBL X2D;Generic TPU @BBL X2D;Bambu PETG Basic @BBL X2D;Bambu PETG HF @BBL X2D;Bambu ABS @BBL X2D;Bambu PC @BBL X2D;Bambu PLA Pure @BBL X2D 0.4 nozzle;Bambu PLA Basic @BBL X2D 0.2 nozzle;Bambu PLA Matte @BBL X2D 0.4 nozzle;Bambu TPU 95A @BBL X2D 0.4 nozzle;Generic TPU @BBL X2D 0.4 nozzle;Bambu PETG Basic @BBL X2D 0.4 nozzle;Bambu PETG HF @BBL X2D 0.4 nozzle;Bambu ABS @BBL X2D 0.4 nozzle;Bambu PC @BBL X2D 0.4 nozzle" +} \ No newline at end of file diff --git a/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json b/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json index e3670c57fd..c0ac9a1843 100644 --- a/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json +++ b/resources/profiles/BBL/machine/fdm_bbl_3dp_001_common.json @@ -113,9 +113,6 @@ "0", "0" ], - "nozzle_type": [ - "hardened_steel" - ], "nozzle_volume": [ "107" ], diff --git a/resources/profiles/BBL/machine/fdm_bbl_3dp_002_common.json b/resources/profiles/BBL/machine/fdm_bbl_3dp_002_common.json index 841d56533c..a5eaf8c6f5 100644 --- a/resources/profiles/BBL/machine/fdm_bbl_3dp_002_common.json +++ b/resources/profiles/BBL/machine/fdm_bbl_3dp_002_common.json @@ -60,6 +60,10 @@ "0", "0" ], + "extruder_max_nozzle_count": [ + "1", + "1" + ], "head_wrap_detect_zone": [], "hotend_cooling_rate": [ "2", @@ -252,12 +256,6 @@ "1", "2" ], - "nozzle_type": [ - "hardened_steel", - "hardened_steel", - "hardened_steel", - "hardened_steel" - ], "nozzle_volume": [ "92", "92", diff --git a/resources/profiles/BBL/machine/fdm_machine_common.json b/resources/profiles/BBL/machine/fdm_machine_common.json index b10072a284..1016397166 100644 --- a/resources/profiles/BBL/machine/fdm_machine_common.json +++ b/resources/profiles/BBL/machine/fdm_machine_common.json @@ -8,7 +8,6 @@ ], "printer_variant": "0.4", "auxiliary_fan": "1", - "apply_top_surface_compensation": "0", "best_object_pos": "0.5x0.5", "default_filament_profile": [], "default_print_profile": "0.16mm Optimal @BBL X1C", @@ -24,20 +23,25 @@ ], "enable_long_retraction_when_cut": "0", "enable_pre_heating": "0", - "bed_temperature_formula": "by_first_filament", + "extruder_height_gap": "0", + "extruder_offset": [ + "0x0" + ], + "fan_direction": "undefine", + "gcode_flavor": "marlin", + "grab_length": [ + "0" + ], + "group_algo_with_time": "0", + "extruder_max_nozzle_count": [ + "1" + ], "hotend_cooling_rate": [ "2" ], "hotend_heating_rate": [ "2" ], - "extruder_offset": [ - "0x0" - ], - "gcode_flavor": "marlin", - "grab_length": [ - "0" - ], "long_retractions_when_cut": [ "0" ], @@ -60,6 +64,9 @@ "machine_max_acceleration_z": [ "100" ], + "machine_max_force_Y": "0", + "machine_bed_mass_Y": "0", + "machine_max_printed_mass": "0", "machine_max_jerk_e": [ "5" ], @@ -93,6 +100,7 @@ "machine_prepare_compensation_time": "260", "machine_switch_extruder_time": "0", "machine_unload_filament_time": "29", + "machine_hotend_change_time": "0", "master_extruder_id": "1", "max_layer_height": [ "0.28" @@ -104,6 +112,7 @@ "nozzle_flush_dataset": [ "0" ], + "print_in_clockwise": "0", "printable_height": "250", "printer_settings_id": "", "printer_structure": "corexy", @@ -136,13 +145,12 @@ "60" ], "scan_first_layer": "0", - "enable_power_loss_recovery": "printer_configuration", "single_extruder_multi_material": "1", "support_air_filtration": "0", "support_cooling_filter": "0", + "support_fast_purge_mode": "0", "cooling_filter_enabled": "0", "support_chamber_temp_control": "0", - "support_fast_purge_mode": "0", "support_object_skip_flush": "0", "wipe": [ "1" @@ -156,7 +164,5 @@ "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end", "time_lapse_gcode": "", "wrapping_detection_gcode": "", - "change_filament_gcode": "", - "purge_in_prime_tower": "0", - "enable_filament_ramming": "0" + "change_filament_gcode": "" } diff --git a/resources/profiles/BBL/process/0.06mm Fine @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Fine @BBL A1 0.2 nozzle.json index 0cc680e2d1..225f9366ca 100644 --- a/resources/profiles/BBL/process/0.06mm Fine @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Fine @BBL A1 0.2 nozzle.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "0.06mm Fine @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.06_nozzle_0.2", - "from": "system", - "setting_id": "GP084", - "instantiation": "true", - "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.06mm Fine @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.06_nozzle_0.2", + "from": "system", + "setting_id": "GP084", + "instantiation": "true", + "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json index 68c6ffe660..2782eaafee 100644 --- a/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Fine @BBL A1M 0.2 nozzle.json @@ -1,24 +1,24 @@ { - "type": "process", - "name": "0.06mm Fine @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.06_nozzle_0.2", - "from": "system", - "setting_id": "GP050", - "instantiation": "true", - "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.06mm Fine @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.06_nozzle_0.2", + "from": "system", + "setting_id": "GP050", + "instantiation": "true", + "description": "Compared with the default profile of 0.2 mm nozzle, it has a smaller layer height, and results in minimal layer lines and higher printing quality, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json index 7eae54fd49..9ae841723a 100644 --- a/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Fine @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "2500", "2500" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json index cb31da1441..15f6fbb663 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1 0.2 nozzle.json @@ -1,32 +1,32 @@ { - "type": "process", - "name": "0.06mm High Quality @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.06_nozzle_0.2", - "from": "system", - "setting_id": "GP118", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "outer_wall_acceleration": [ - "2000" - ], - "outer_wall_speed": [ - "60" - ], - "sparse_infill_pattern": "gyroid", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.06mm High Quality @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.06_nozzle_0.2", + "from": "system", + "setting_id": "GP118", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "4000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "outer_wall_acceleration": [ + "2000" + ], + "outer_wall_speed": [ + "60" + ], + "sparse_infill_pattern": "gyroid", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json index d4f8971af4..8f1f3ee9fe 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL A1M 0.2 nozzle.json @@ -1,31 +1,31 @@ { - "type": "process", - "name": "0.06mm High Quality @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.06_nozzle_0.2", - "from": "system", - "setting_id": "GP117", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "3000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "outer_wall_speed": [ - "60" - ], - "outer_wall_acceleration": [ - "2000" - ], - "sparse_infill_pattern": "gyroid", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.06mm High Quality @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.06_nozzle_0.2", + "from": "system", + "setting_id": "GP117", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in minimal layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "3000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "outer_wall_speed": [ + "60" + ], + "outer_wall_acceleration": [ + "2000" + ], + "sparse_infill_pattern": "gyroid", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json index 9ccca5434e..517fe80a9b 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,14 +43,26 @@ "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" ], "outer_wall_speed": [ "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0" @@ -92,6 +92,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -128,34 +136,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json index 80edd032c6..8323ef79d2 100644 --- a/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm High Quality @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,14 +43,26 @@ "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" ], "outer_wall_speed": [ "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0" @@ -92,6 +92,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -128,34 +136,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json index b1bfc9052a..cbd74e9244 100644 --- a/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.06mm Standard @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "5000", "5000" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1.json index eb39d07cbb..c60006d3d7 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.08mm Extra Fine @BBL A1", - "inherits": "fdm_process_single_0.08", - "from": "system", - "setting_id": "GP076", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.08mm Extra Fine @BBL A1", + "inherits": "fdm_process_single_0.08", + "from": "system", + "setting_id": "GP076", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json index f663382bc1..8e31867e15 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL A1M.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.08mm Extra Fine @BBL A1M", - "inherits": "fdm_process_single_0.08", - "from": "system", - "setting_id": "GP049", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.08mm Extra Fine @BBL A1M", + "inherits": "fdm_process_single_0.08", + "from": "system", + "setting_id": "GP049", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D 0.2 nozzle.json index 028660c893..9178ef5c0c 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D 0.2 nozzle.json @@ -1,38 +1,39 @@ { - "type": "process", - "name": "0.08mm Extra Fine @BBL H2D 0.2 nozzle", - "inherits": "fdm_process_dual_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP139", - "instantiation": "true", - "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm Extra Fine @BBL H2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP139", + "instantiation": "true", + "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D.json index 64624b0bec..185c792b7e 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2D.json @@ -5,32 +5,59 @@ "from": "system", "setting_id": "GP136", "instantiation": "true", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000" - ], - "gap_infill_speed": [ + "bridge_speed": [ + "50", + "50", "50", "50", "50", "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70", - "70", - "70", - "70" + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" ], "initial_layer_speed": [ "40", "40", "40", "40", + "40", + "40", "40" ], "inner_wall_speed": [ @@ -38,6 +65,8 @@ "120", "120", "120", + "120", + "120", "120" ], "internal_solid_infill_speed": [ @@ -45,27 +74,71 @@ "120", "120", "120", + "120", + "120", "120" ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" ], "outer_wall_speed": [ "60", "60", "60", "60", + "60", + "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], "overhang_1_4_speed": [ "60", "60", "60", "60", + "60", + "60", "60" ], "overhang_2_4_speed": [ @@ -73,6 +146,8 @@ "30", "30", "30", + "30", + "30", "30" ], "overhang_3_4_speed": [ @@ -80,73 +155,26 @@ "10", "10", "10", + "10", + "10", "10" ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100", - "100" - ], - "top_surface_speed": [ - "120", - "120", - "120", - "120", - "120" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], - "inner_wall_acceleration": [ - "0", - "0", - "0", - "0", - "0" - ], "overhang_4_4_speed": [ "10", "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -154,36 +182,29 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -191,34 +212,164 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "top_surface_speed": [ + "120", + "120", + "120", + "120", + "120", + "120", + "120" ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", "500", "500", + "500", + "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP 0.2 nozzle.json index 9b3e95027b..64b7278bdd 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP 0.2 nozzle.json @@ -1,38 +1,38 @@ { - "type": "process", - "name": "0.08mm Extra Fine @BBL H2DP 0.2 nozzle", - "inherits": "fdm_process_dual_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP040", - "instantiation": "true", - "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm Extra Fine @BBL H2DP 0.2 nozzle", + "inherits": "fdm_process_dual_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP040", + "instantiation": "true", + "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP.json index 122190afd4..08bcd98c31 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL H2DP.json @@ -5,6 +5,13 @@ "from": "system", "setting_id": "GP043", "instantiation": "true", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "4000", "4000", @@ -12,6 +19,20 @@ "4000", "4000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "50", "50", @@ -40,6 +61,20 @@ "120", "120" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ "70", "70", @@ -47,6 +82,13 @@ "70", "70" ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], "outer_wall_speed": [ "60", "60", @@ -82,61 +124,6 @@ "10", "10" ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100", - "100" - ], - "top_surface_speed": [ - "120", - "120", - "120", - "120", - "120" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], - "inner_wall_acceleration": [ - "0", - "0", - "0", - "0", - "0" - ], "overhang_4_4_speed": [ "10", "10", @@ -144,6 +131,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -158,6 +147,70 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100", + "100" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -179,26 +232,12 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "top_surface_speed": [ + "120", + "120", + "120", + "120", + "120" ], "travel_acceleration": [ "10000", @@ -207,6 +246,13 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", @@ -214,11 +260,35 @@ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json index 0c9ed0c2d3..423b16e0df 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL P1P.json @@ -26,10 +26,6 @@ "350", "350" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,22 +38,30 @@ "350", "350" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], "overhang_1_4_speed": [ "60", "60" @@ -70,10 +74,6 @@ "10", "10" ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], "overhang_4_4_speed": [ "10", "10" @@ -90,6 +90,14 @@ "450", "450" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json index 60ba1abfa7..4e7ba2f670 100644 --- a/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm Extra Fine @BBL X1C.json @@ -26,10 +26,6 @@ "350", "350" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,22 +38,30 @@ "350", "350" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], "overhang_1_4_speed": [ "60", "60" @@ -70,10 +74,6 @@ "10", "10" ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], "overhang_4_4_speed": [ "10", "10" @@ -90,6 +90,14 @@ "450", "450" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json index f6e51105a2..36b8a073bb 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1 0.2 nozzle.json @@ -1,32 +1,32 @@ { - "type": "process", - "name": "0.08mm High Quality @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP119", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "outer_wall_acceleration": [ - "2000" - ], - "outer_wall_speed": [ - "60" - ], - "sparse_infill_pattern": "gyroid", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm High Quality @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP119", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "4000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "outer_wall_acceleration": [ + "2000" + ], + "outer_wall_speed": [ + "60" + ], + "sparse_infill_pattern": "gyroid", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json index 9c183b14b9..ae14ead2b3 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1.json @@ -1,41 +1,41 @@ { - "type": "process", - "name": "0.08mm High Quality @BBL A1", - "inherits": "fdm_process_single_0.08", - "from": "system", - "setting_id": "GP102", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000" - ], - "elefant_foot_compensation": "0.075", - "gap_infill_speed": [ - "210" - ], - "inner_wall_speed": [ - "120" - ], - "internal_solid_infill_speed": [ - "150" - ], - "outer_wall_acceleration": [ - "2000" - ], - "outer_wall_speed": [ - "60" - ], - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "150" - ], - "top_surface_speed": [ - "150" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.08mm High Quality @BBL A1", + "inherits": "fdm_process_single_0.08", + "from": "system", + "setting_id": "GP102", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "4000" + ], + "elefant_foot_compensation": "0.075", + "gap_infill_speed": [ + "210" + ], + "inner_wall_speed": [ + "120" + ], + "internal_solid_infill_speed": [ + "150" + ], + "outer_wall_acceleration": [ + "2000" + ], + "outer_wall_speed": [ + "60" + ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "150" + ], + "top_surface_speed": [ + "150" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json index 428c72b7b9..4ad1413552 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M 0.2 nozzle.json @@ -1,31 +1,31 @@ { - "type": "process", - "name": "0.08mm High Quality @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP120", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "3000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "outer_wall_speed": [ - "60" - ], - "outer_wall_acceleration": [ - "2000" - ], - "sparse_infill_pattern": "gyroid", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm High Quality @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP120", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer lines, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost invisible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "3000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "outer_wall_speed": [ + "60" + ], + "outer_wall_acceleration": [ + "2000" + ], + "sparse_infill_pattern": "gyroid", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json index d125acc09d..569151b943 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A1M.json @@ -1,41 +1,41 @@ { - "type": "process", - "name": "0.08mm High Quality @BBL A1M", - "inherits": "fdm_process_single_0.08", - "from": "system", - "setting_id": "GP101", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "3000" - ], - "elefant_foot_compensation": "0", - "gap_infill_speed": [ - "210" - ], - "inner_wall_speed": [ - "120" - ], - "internal_solid_infill_speed": [ - "150" - ], - "outer_wall_speed": [ - "60" - ], - "outer_wall_acceleration": [ - "2000" - ], - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "150" - ], - "top_surface_speed": [ - "150" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.08mm High Quality @BBL A1M", + "inherits": "fdm_process_single_0.08", + "from": "system", + "setting_id": "GP101", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "3000" + ], + "elefant_foot_compensation": "0", + "gap_infill_speed": [ + "210" + ], + "inner_wall_speed": [ + "120" + ], + "internal_solid_infill_speed": [ + "150" + ], + "outer_wall_speed": [ + "60" + ], + "outer_wall_acceleration": [ + "2000" + ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "150" + ], + "top_surface_speed": [ + "150" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json index c87e2d5d0e..32e0da8c6b 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L 0.2 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "4000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json index 1d1eb841da..702b75f0bf 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL A2L.json @@ -9,7 +9,6 @@ "default_acceleration": [ "4000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" @@ -42,9 +41,6 @@ "slowdown_start_acc": [ "8000" ], - "slowdown_start_height": [ - "0" - ], "slowdown_start_speed": [ "500" ], diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C 0.2 nozzle.json index 6552d7b47e..ac6fe2150d 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C 0.2 nozzle.json @@ -1,45 +1,45 @@ { - "type": "process", - "name": "0.08mm High Quality @BBL H2C 0.2 nozzle", - "inherits": "fdm_process_dual_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP243", - "instantiation": "true", - "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "enable_tower_interface_features": "1", - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60" - ], - "outer_wall_speed": [ - "100", - "100", - "100", - "100" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm High Quality @BBL H2C 0.2 nozzle", + "inherits": "fdm_process_dual_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP243", + "instantiation": "true", + "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60" + ], + "outer_wall_speed": [ + "100", + "100", + "100", + "100" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C.json index be2c204f08..b237b22500 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2C.json @@ -9,6 +9,7 @@ "4000", "4000", "4000", + "4000", "4000" ], "enable_tower_interface_features": "1", @@ -16,60 +17,70 @@ "50", "50", "50", + "50", "50" ], "initial_layer_infill_speed": [ "70", "70", "70", + "70", "70" ], "initial_layer_speed": [ "40", "40", "40", + "40", "40" ], "inner_wall_speed": [ "120", "120", "120", + "120", "120" ], "internal_solid_infill_speed": [ "120", "120", "120", + "120", "120" ], "outer_wall_acceleration": [ "2000", "2000", "2000", + "2000", "2000" ], "outer_wall_speed": [ "60", "60", "60", + "60", "60" ], "overhang_1_4_speed": [ "60", "60", "60", + "60", "60" ], "overhang_2_4_speed": [ "30", "30", "30", + "30", "30" ], "overhang_3_4_speed": [ "10", "10", "10", + "10", "10" ], "prime_tower_brim_width": "-1", @@ -79,15 +90,206 @@ "100", "100", "100", + "100", "100" ], "top_surface_speed": [ "120", "120", "120", + "120", "120" ], "compatible_printers": [ "Bambu Lab H2C 0.4 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "travel_speed": [ + "500", + "500", + "500", + "500", + "500" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json index 521f97aad2..4396ab55aa 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S 0.2 nozzle.json @@ -6,52 +6,15 @@ "setting_id": "GP231", "instantiation": "true", "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", - "default_acceleration": [ - "10000", - "10000" - ], - "initial_layer_speed": [ - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_infill_speed": [ - "70", - "70" - ], - "sparse_infill_speed": [ - "100", - "100" - ], - "top_surface_speed": [ - "150", - "150" - ], "bridge_speed": [ "50", "50" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "travel_acceleration": [ + "default_acceleration": [ "10000", "10000" ], + "elefant_foot_compensation": "0.15", "enable_overhang_speed": [ "1", "1" @@ -60,6 +23,86 @@ "0", "0" ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_speed": [ + "40", + "40" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "100", + "100" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "100", + "100" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -84,54 +127,6 @@ "100000", "100000" ], - "gap_infill_speed": [ - "50", - "50" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], - "inner_wall_speed": [ - "150", - "150" - ], - "internal_solid_infill_speed": [ - "150", - "150" - ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], - "outer_wall_speed": [ - "100", - "100" - ], - "overhang_2_4_speed": [ - "50", - "50" - ], - "overhang_3_4_speed": [ - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10" - ], - "print_extruder_id": [ - "1", - "1" - ], - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "small_perimeter_speed": [ "50%", "50%" @@ -144,14 +139,26 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80" - ], - "support_speed": [ + "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -164,6 +171,8 @@ "80%", "80%" ], - "prime_tower_flat_ironing": "1", - "sparse_infill_pattern": "gyroid" + "monotonic_travel_into_wall": "45.0", + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json index d30d85cdc6..50b9952447 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL H2S.json @@ -5,164 +5,213 @@ "from": "system", "setting_id": "GP232", "instantiation": "true", + "bridge_speed": [ + "50", + "50", + "50" + ], "default_acceleration": [ + "4000", "4000", "4000" ], + "enable_height_slowdown": [ + "0", + "0", + "0" + ], + "enable_overhang_speed": [ + "1", + "1", + "1" + ], "gap_infill_speed": [ + "210", "210", "210" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ + "105", "105", "105" ], "initial_layer_speed": [ "50", - "50" - ], - "inner_wall_speed": [ - "120", - "120" - ], - "internal_solid_infill_speed": [ - "150", - "150" - ], - "outer_wall_acceleration": [ - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "60" - ], - "overhang_1_4_speed": [ - "60", - "60" - ], - "overhang_2_4_speed": [ - "30", - "30" - ], - "overhang_3_4_speed": [ - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "150", - "150" - ], - "top_surface_speed": [ - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "top_shell_thickness": "1.0", - "bridge_speed": [ "50", "50" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], "inner_wall_acceleration": [ + "0", "0", "0" ], - "overhang_4_4_speed": [ + "inner_wall_speed": [ + "120", + "120", + "120" + ], + "internal_solid_infill_speed": [ + "150", + "150", + "150" + ], + "monotonic_travel_into_wall": "45.0", + "outer_wall_acceleration": [ + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "60", + "60" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", "10", "10" ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "150", + "150", + "150" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], + "top_shell_thickness": "1.0", + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], + "top_surface_speed": [ + "150", + "150", + "150" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ + "500", "500", "500" ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json index 1d72dc8bc2..50d97550cc 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,14 +43,26 @@ "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" ], "outer_wall_speed": [ "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0" @@ -92,6 +92,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -128,34 +136,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json index ab50f11c4d..75e31bb3c2 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P1P.json @@ -26,6 +26,10 @@ "210", "210" ], + "initial_layer_speed": [ + "50", + "50" + ], "inner_wall_speed": [ "120", "120" @@ -34,34 +38,30 @@ "150", "150" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" + "outer_wall_speed": [ + "60", + "60" ], "outer_wall_acceleration": [ "2000", "2000" ], - "outer_wall_speed": [ - "60", - "60" - ], "overhang_1_4_speed": [ "60", "60" @@ -91,6 +91,14 @@ "150", "150" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json index fba6cdf18b..8ca40003f3 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S 0.2 nozzle.json @@ -6,12 +6,10 @@ "setting_id": "GP204", "instantiation": "true", "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ "4000", "4000" @@ -28,22 +26,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "50", - "50" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -56,14 +42,30 @@ "6000", "6000" ], - "overhang_1_4_speed": [ + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "50", + "50" + ], + "inner_wall_acceleration": [ "0", + "0" + ], + "outer_wall_speed": [ + "60", "60" ], "outer_wall_acceleration": [ "2000", "2000" ], + "overhang_1_4_speed": [ + "0", + "60" + ], "overhang_2_4_speed": [ "60", "30" @@ -72,16 +74,12 @@ "40", "10" ], - "outer_wall_speed": [ - "60", - "60" - ], "overhang_4_4_speed": [ "20", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1" @@ -90,11 +88,20 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -131,23 +138,26 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -156,14 +166,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.2 nozzle" ] diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json index 89bca9df5b..bd399e65a1 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL P2S.json @@ -5,164 +5,211 @@ "from": "system", "setting_id": "GP205", "instantiation": "true", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "50", "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "4000", "4000", "4000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "210", "210", "210" ], + "initial_layer_speed": [ + "50", + "50", + "50" + ], "inner_wall_speed": [ + "120", "120", "120" ], "internal_solid_infill_speed": [ + "150", "150", "150" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" ], "outer_wall_speed": [ + "60", "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", + "60", "60" ], "overhang_2_4_speed": [ "60", + "30", "30" ], "overhang_3_4_speed": [ "40", + "10", "10" ], "overhang_4_4_speed": [ "20", + "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "150", - "150" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "small_perimeter_speed": [ - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%" - ], - "support_speed": [ "150", "150" ], "support_interface_speed": [ + "80", "80", "80" ], - "top_surface_speed": [ + "support_speed": [ + "150", "150", "150" ], - "top_surface_pattern": "monotonic", + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%" + ], + "top_surface_speed": [ + "150", + "150", + "150" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ - "600", - "600" + "1000", + "1000", + "1000" ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json index 9ecb07315c..43892532a2 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,14 +43,26 @@ "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" ], "outer_wall_speed": [ "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0" @@ -92,6 +92,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -128,34 +136,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json index 46391c740a..877a682ca5 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X1C.json @@ -26,6 +26,10 @@ "210", "210" ], + "initial_layer_speed": [ + "50", + "50" + ], "inner_wall_speed": [ "120", "120" @@ -34,34 +38,30 @@ "150", "150" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" + "outer_wall_speed": [ + "60", + "60" ], "outer_wall_acceleration": [ "2000", "2000" ], - "outer_wall_speed": [ - "60", - "60" - ], "overhang_1_4_speed": [ "60", "60" @@ -91,6 +91,14 @@ "150", "150" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D 0.2 nozzle.json index 7fad2321e6..05a7af7e4a 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D 0.2 nozzle.json @@ -1,71 +1,71 @@ { - "type": "process", - "name": "0.08mm High Quality @BBL X2D 0.2 nozzle", - "inherits": "fdm_process_dual_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP216", - "instantiation": "true", - "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", - "bridge_flow": "1.5", - "bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "default_acceleration": [ - "4000", - "8000", - "4000", - "4000" - ], - "enable_tower_interface_features": "1", - "initial_layer_speed": [ - "40", - "40", - "20", - "20" - ], - "outer_wall_acceleration": [ - "2000", - "5000", - "5000", - "5000" - ], - "outer_wall_speed": [ - "60", - "120", - "50", - "50" - ], - "overhang_2_4_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_4_4_speed": [ - "20", - "20", - "20", - "20" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "sparse_infill_pattern": "gyroid", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm High Quality @BBL X2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP216", + "instantiation": "true", + "description": "High quality profile for 0.2mm nozzle, prioritizing print quality.", + "bridge_flow": "1.5", + "bridge_speed": [ + "25", + "25", + "25", + "25" + ], + "default_acceleration": [ + "4000", + "8000", + "4000", + "4000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "20", + "20" + ], + "outer_wall_acceleration": [ + "2000", + "5000", + "5000", + "5000" + ], + "outer_wall_speed": [ + "60", + "120", + "50", + "50" + ], + "overhang_2_4_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_4_4_speed": [ + "20", + "20", + "20", + "20" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "sparse_infill_pattern": "gyroid", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D.json b/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D.json index 201721da9e..dab9ea764a 100644 --- a/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D.json +++ b/resources/profiles/BBL/process/0.08mm High Quality @BBL X2D.json @@ -7,6 +7,8 @@ "instantiation": "true", "bridge_flow": "1.5", "bridge_speed": [ + "25", + "25", "25", "25", "25", @@ -15,6 +17,8 @@ "default_acceleration": [ "4000", "4000", + "4000", + "1000", "1000", "1000" ], @@ -22,46 +26,62 @@ "initial_layer_infill_speed": [ "70", "70", + "70", + "100", "100", "100" ], "initial_layer_speed": [ "50", "40", + "40", + "50", "50", "50" ], "inner_wall_speed": [ "120", "120", + "120", + "100", "100", "100" ], "internal_solid_infill_speed": [ "120", "120", + "120", + "100", "100", "100" ], "outer_wall_acceleration": [ "2000", "2000", + "2000", + "1000", "1000", "1000" ], "outer_wall_speed": [ "60", "60", + "60", + "50", "50", "50" ], "overhang_2_4_speed": [ + "40", + "40", "40", "40", "40", "40" ], "overhang_4_4_speed": [ + "20", + "20", "20", "20", "20", @@ -72,11 +92,23 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ + "100", + "100", "100", "100", "100", @@ -86,10 +118,14 @@ "top_surface_speed": [ "120", "120", + "120", + "100", "100", "100" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -97,5 +133,205 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.4 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" ] } diff --git a/resources/profiles/BBL/process/0.08mm Optimal @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1 0.2 nozzle.json index 1261079a0a..cae05d9570 100644 --- a/resources/profiles/BBL/process/0.08mm Optimal @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1 0.2 nozzle.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "0.08mm Optimal @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP085", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm Optimal @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP085", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json index 7d85a42520..22cc6b5120 100644 --- a/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Optimal @BBL A1M 0.2 nozzle.json @@ -1,24 +1,24 @@ { - "type": "process", - "name": "0.08mm Optimal @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.08_nozzle_0.2", - "from": "system", - "setting_id": "GP051", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.08mm Optimal @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.08_nozzle_0.2", + "from": "system", + "setting_id": "GP051", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a smaller layer height, and results in almost invisible layer lines and higher printing quality, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json index 748fa47e60..00e6966420 100644 --- a/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Optimal @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "2500", "2500" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json index de2043ca5f..e39c982b7c 100644 --- a/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.08mm Standard @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "5000", "5000" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json index bdf92d4828..ae0fb564bc 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1 0.2 nozzle.json @@ -1,32 +1,32 @@ { - "type": "process", - "name": "0.10mm High Quality @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP114", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", - "default_acceleration": [ - "4000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "outer_wall_acceleration": [ - "2000" - ], - "outer_wall_speed": [ - "60" - ], - "sparse_infill_pattern": "gyroid", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm High Quality @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP114", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", + "default_acceleration": [ + "4000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "outer_wall_acceleration": [ + "2000" + ], + "outer_wall_speed": [ + "60" + ], + "sparse_infill_pattern": "gyroid", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json index f05f26152e..89f0ade70d 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL A1M 0.2 nozzle.json @@ -1,31 +1,31 @@ { - "type": "process", - "name": "0.10mm High Quality @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP113", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", - "default_acceleration": [ - "3000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "outer_wall_speed": [ - "60" - ], - "outer_wall_acceleration": [ - "2000" - ], - "sparse_infill_pattern": "gyroid", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm High Quality @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP113", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in much higher printing quality, but a much longer printing time.", + "default_acceleration": [ + "3000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "outer_wall_speed": [ + "60" + ], + "outer_wall_acceleration": [ + "2000" + ], + "sparse_infill_pattern": "gyroid", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json index 88b2bc08df..85f6814858 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,14 +43,26 @@ "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" ], "outer_wall_speed": [ "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0" @@ -92,6 +92,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -128,34 +136,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json index 5dcdb588f1..90164e6c99 100644 --- a/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm High Quality @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,14 +43,26 @@ "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" ], "outer_wall_speed": [ "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0" @@ -92,6 +92,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -128,34 +136,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A1 0.2 nozzle.json index e594e557e5..a62ae0dcf5 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A1 0.2 nozzle.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "0.10mm Standard @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP083", - "instantiation": "true", - "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm Standard @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP083", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json index 4f7adc8d1c..3b898e8041 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A1M 0.2 nozzle.json @@ -1,24 +1,24 @@ { - "type": "process", - "name": "0.10mm Standard @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP039", - "instantiation": "true", - "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", - "default_acceleration": [ - "6000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm Standard @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP039", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "6000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json index c122c78e09..2ec37b0efd 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL A2L 0.2 nozzle.json @@ -10,7 +10,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2C 0.2 nozzle.json index 2139246636..fe21267b4d 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2C 0.2 nozzle.json @@ -1,46 +1,46 @@ { - "type": "process", - "name": "0.10mm Standard @BBL H2C 0.2 nozzle", - "inherits": "fdm_process_dual_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP245", - "instantiation": "true", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "enable_tower_interface_features": "1", - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "ironing_speed": "20", - "ironing_flow": "20%", - "outer_wall_speed": [ - "100", - "100", - "100", - "100" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm Standard @BBL H2C 0.2 nozzle", + "inherits": "fdm_process_dual_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP245", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "ironing_speed": "20", + "ironing_flow": "20%", + "outer_wall_speed": [ + "100", + "100", + "100", + "100" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json index 72e86cbda6..ff216acf66 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2D 0.2 nozzle.json @@ -1,31 +1,32 @@ { - "type": "process", - "name": "0.10mm Standard @BBL H2D 0.2 nozzle", - "inherits": "fdm_process_dual_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP123", - "instantiation": "true", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm Standard @BBL H2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP123", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2DP 0.2 nozzle.json index 7fc4f213ae..6379498843 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2DP 0.2 nozzle.json @@ -1,31 +1,31 @@ { - "type": "process", - "name": "0.10mm Standard @BBL H2DP 0.2 nozzle", - "inherits": "fdm_process_dual_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP041", - "instantiation": "true", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm Standard @BBL H2DP 0.2 nozzle", + "inherits": "fdm_process_dual_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP041", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json index 698c0ba106..6df990e59c 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL H2S 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -51,10 +39,28 @@ "150", "150" ], + "ironing_flow": "20%", + "ironing_speed": "20", "initial_layer_travel_acceleration": [ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "100", + "100" + ], "outer_wall_acceleration": [ "5000", "5000" @@ -75,12 +81,8 @@ "10", "10" ], - "outer_wall_speed": [ - "100", - "100" - ], - "prime_tower_flat_ironing": "1", "prime_tower_width": "60", + "prime_tower_flat_ironing": "1", "print_extruder_id": [ "1", "1" @@ -93,26 +95,14 @@ "100", "100" ], - "small_perimeter_speed": [ - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%" + "support_interface_speed": [ + "80", + "80" ], "support_speed": [ "150", "150" ], - "support_interface_speed": [ - "80", - "80" - ], "slowdown_start_height": [ "0", "0" @@ -137,14 +127,38 @@ "100000", "100000" ], - "travel_speed": [ - "1000", - "1000" + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%" ], "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -153,14 +167,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab H2S 0.2 nozzle" ] diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json index 8c7c9415a1..2e03ae7655 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "5000", "5000" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json index 51fcbc71d4..02ec0007ec 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL P2S 0.2 nozzle.json @@ -5,12 +5,10 @@ "from": "system", "setting_id": "GP153", "instantiation": "true", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ "4000", "4000" @@ -28,22 +26,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "50", - "50" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -56,6 +42,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "50", + "50" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "100", + "100" + ], "outer_wall_acceleration": [ "2000", "2000" @@ -72,10 +74,6 @@ "40", "10" ], - "outer_wall_speed": [ - "100", - "100" - ], "overhang_4_4_speed": [ "20", "10" @@ -88,10 +86,19 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -128,23 +135,26 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -153,14 +163,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.2 nozzle" ] diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json index 5145c45b42..2ba56ae744 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "5000", "5000" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.10mm Standard @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.10mm Standard @BBL X2D 0.2 nozzle.json index db79e7411c..bd69dbc54d 100644 --- a/resources/profiles/BBL/process/0.10mm Standard @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.10mm Standard @BBL X2D 0.2 nozzle.json @@ -1,69 +1,69 @@ { - "type": "process", - "name": "0.10mm Standard @BBL X2D 0.2 nozzle", - "inherits": "fdm_process_dual_0.10_nozzle_0.2", - "from": "system", - "setting_id": "GP148", - "instantiation": "true", - "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", - "bridge_flow": "1.5", - "bridge_speed": [ - "25", - "25", - "25", - "25" - ], - "default_acceleration": [ - "4000", - "10000", - "4000", - "4000" - ], - "enable_tower_interface_features": "1", - "initial_layer_speed": [ - "40", - "20", - "20", - "20" - ], - "outer_wall_acceleration": [ - "2000", - "5000", - "4000", - "4000" - ], - "outer_wall_speed": [ - "100", - "120", - "50", - "50" - ], - "overhang_2_4_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_4_4_speed": [ - "20", - "20", - "20", - "20" - ], - "prime_tower_brim_width": "-1", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ] -} + "type": "process", + "name": "0.10mm Standard @BBL X2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.10_nozzle_0.2", + "from": "system", + "setting_id": "GP148", + "instantiation": "true", + "description": "It has a small layer height, and results in almost negligible layer lines and high printing quality. It is suitable for most general printing cases.", + "bridge_flow": "1.5", + "bridge_speed": [ + "25", + "25", + "25", + "25" + ], + "default_acceleration": [ + "4000", + "10000", + "4000", + "4000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "20", + "20", + "20" + ], + "outer_wall_acceleration": [ + "2000", + "5000", + "4000", + "4000" + ], + "outer_wall_speed": [ + "100", + "120", + "50", + "50" + ], + "overhang_2_4_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_4_4_speed": [ + "20", + "20", + "20", + "20" + ], + "prime_tower_brim_width": "-1", + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json index 3fd94d41ca..f44831cdba 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL A2L 0.2 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2C 0.2 nozzle.json index 33691925f0..bf6f1100d6 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2C 0.2 nozzle.json @@ -1,44 +1,44 @@ { - "type": "process", - "name": "0.12mm Balanced Quality @BBL H2C 0.2 nozzle", - "inherits": "fdm_process_dual_0.12_nozzle_0.2", - "from": "system", - "setting_id": "GP246", - "instantiation": "true", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "enable_tower_interface_features": "1", - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60" - ], - "outer_wall_speed": [ - "100", - "100", - "100", - "100" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.2 nozzle" - ] -} + "type": "process", + "name": "0.12mm Balanced Quality @BBL H2C 0.2 nozzle", + "inherits": "fdm_process_dual_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP246", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60" + ], + "outer_wall_speed": [ + "100", + "100", + "100", + "100" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2D 0.2 nozzle.json index 09846ad5c1..740aeea2bf 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2D 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2D 0.2 nozzle.json @@ -1,37 +1,38 @@ { - "type": "process", - "name": "0.12mm Balanced Quality @BBL H2D 0.2 nozzle", - "inherits": "fdm_process_dual_0.12_nozzle_0.2", - "from": "system", - "setting_id": "GP140", - "instantiation": "true", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.2 nozzle" - ] -} + "type": "process", + "name": "0.12mm Balanced Quality @BBL H2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP140", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2DP 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2DP 0.2 nozzle.json index 8fc4edbc13..3105c027de 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2DP 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2DP 0.2 nozzle.json @@ -1,37 +1,37 @@ { - "type": "process", - "name": "0.12mm Balanced Quality @BBL H2DP 0.2 nozzle", - "inherits": "fdm_process_dual_0.12_nozzle_0.2", - "from": "system", - "setting_id": "GP042", - "instantiation": "true", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "40", - "40", - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.2 nozzle" - ] -} + "type": "process", + "name": "0.12mm Balanced Quality @BBL H2DP 0.2 nozzle", + "inherits": "fdm_process_dual_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP042", + "instantiation": "true", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "initial_layer_speed": [ + "40", + "40", + "40", + "40" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json index f35eccf500..fe43dfd8f4 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL H2S 0.2 nozzle.json @@ -5,52 +5,15 @@ "from": "system", "setting_id": "GP233", "instantiation": "true", - "default_acceleration": [ - "10000", - "10000" - ], - "initial_layer_speed": [ - "40", - "40" - ], - "overhang_1_4_speed": [ - "60", - "60" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "travel_speed": [ - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.2 nozzle" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_infill_speed": [ - "70", - "70" - ], - "sparse_infill_speed": [ - "100", - "100" - ], - "top_surface_speed": [ - "150", - "150" - ], "bridge_speed": [ "50", "50" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "travel_acceleration": [ + "default_acceleration": [ "10000", "10000" ], + "elefant_foot_compensation": "0.15", "enable_overhang_speed": [ "1", "1" @@ -59,6 +22,85 @@ "0", "0" ], + "gap_infill_speed": [ + "50", + "50" + ], + "initial_layer_speed": [ + "40", + "40" + ], + "inner_wall_speed": [ + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "100", + "100" + ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "60", + "60" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "sparse_infill_speed": [ + "100", + "100" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -83,54 +125,6 @@ "100000", "100000" ], - "gap_infill_speed": [ - "50", - "50" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], - "inner_wall_speed": [ - "150", - "150" - ], - "internal_solid_infill_speed": [ - "150", - "150" - ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], - "outer_wall_speed": [ - "100", - "100" - ], - "overhang_2_4_speed": [ - "50", - "50" - ], - "overhang_3_4_speed": [ - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10" - ], - "print_extruder_id": [ - "1", - "1" - ], - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "small_perimeter_speed": [ "50%", "50%" @@ -143,14 +137,26 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80" - ], - "support_speed": [ + "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -163,5 +169,8 @@ "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "monotonic_travel_into_wall": "45.0", + "compatible_printers": [ + "Bambu Lab H2S 0.2 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json index f7a7639857..e3471e88b0 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL P2S 0.2 nozzle.json @@ -5,12 +5,10 @@ "from": "system", "setting_id": "GP206", "instantiation": "true", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ "4000", "4000" @@ -27,22 +25,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "50", - "50" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,14 +41,30 @@ "6000", "6000" ], - "overhang_1_4_speed": [ + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "50", + "50" + ], + "inner_wall_acceleration": [ "0", - "60" + "0" + ], + "outer_wall_speed": [ + "100", + "100" ], "outer_wall_acceleration": [ "2000", "2000" ], + "overhang_1_4_speed": [ + "0", + "60" + ], "overhang_2_4_speed": [ "60", "30" @@ -71,16 +73,12 @@ "40", "10" ], - "outer_wall_speed": [ - "100", - "100" - ], "overhang_4_4_speed": [ "20", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1" @@ -89,10 +87,19 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -129,23 +136,26 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -154,14 +164,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.2 nozzle" ] diff --git a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL X2D 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL X2D 0.2 nozzle.json index 0659337324..2ffb707c46 100644 --- a/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL X2D 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Balanced Quality @BBL X2D 0.2 nozzle.json @@ -1,68 +1,68 @@ { - "type": "process", - "name": "0.12mm Balanced Quality @BBL X2D 0.2 nozzle", - "inherits": "fdm_process_dual_0.12_nozzle_0.2", - "from": "system", - "setting_id": "GP219", - "instantiation": "true", - "default_acceleration": [ - "4000", - "8000", - "4000", - "4000" - ], - "enable_tower_interface_features": "1", - "initial_layer_speed": [ - "40", - "40", - "20", - "20" - ], - "outer_wall_acceleration": [ - "2000", - "5000", - "5000", - "5000" - ], - "outer_wall_speed": [ - "100", - "120", - "50", - "50" - ], - "overhang_1_4_speed": [ - "60", - "60", - "0", - "0" - ], - "overhang_2_4_speed": [ - "30", - "50", - "50", - "50" - ], - "overhang_3_4_speed": [ - "10", - "30", - "30", - "30" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.2 nozzle" - ] -} + "type": "process", + "name": "0.12mm Balanced Quality @BBL X2D 0.2 nozzle", + "inherits": "fdm_process_dual_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP219", + "instantiation": "true", + "default_acceleration": [ + "4000", + "8000", + "4000", + "4000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "40", + "40", + "20", + "20" + ], + "outer_wall_acceleration": [ + "2000", + "5000", + "5000", + "5000" + ], + "outer_wall_speed": [ + "100", + "120", + "50", + "50" + ], + "overhang_1_4_speed": [ + "60", + "60", + "0", + "0" + ], + "overhang_2_4_speed": [ + "30", + "50", + "50", + "50" + ], + "overhang_3_4_speed": [ + "10", + "30", + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL A1 0.2 nozzle.json index 4ff6131907..32c72fff62 100644 --- a/resources/profiles/BBL/process/0.12mm Draft @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Draft @BBL A1 0.2 nozzle.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "0.12mm Draft @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.12_nozzle_0.2", - "from": "system", - "setting_id": "GP086", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.12mm Draft @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP086", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json index 49c0ce07e5..2c3c43d12a 100644 --- a/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Draft @BBL A1M 0.2 nozzle.json @@ -1,24 +1,24 @@ { - "type": "process", - "name": "0.12mm Draft @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.12_nozzle_0.2", - "from": "system", - "setting_id": "GP052", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", - "default_acceleration": [ - "6000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.12mm Draft @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.12_nozzle_0.2", + "from": "system", + "setting_id": "GP052", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a slightly bigger layer height, and results in almost negligible layer lines, and slightly shorter printing time.", + "default_acceleration": [ + "6000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json index 83afb88fd8..46b781c4b0 100644 --- a/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Draft @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "2500", "2500" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL A1.json b/resources/profiles/BBL/process/0.12mm Fine @BBL A1.json index 9a37ca278c..3cba0cd013 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL A1.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.12mm Fine @BBL A1", - "inherits": "fdm_process_single_0.12", - "from": "system", - "setting_id": "GP077", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.12mm Fine @BBL A1", + "inherits": "fdm_process_single_0.12", + "from": "system", + "setting_id": "GP077", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json index 61979a5549..3412b7726b 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL A1M.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.12mm Fine @BBL A1M", - "inherits": "fdm_process_single_0.12", - "from": "system", - "setting_id": "GP044", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.12mm Fine @BBL A1M", + "inherits": "fdm_process_single_0.12", + "from": "system", + "setting_id": "GP044", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in almost negligible layer lines and higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL H2D.json b/resources/profiles/BBL/process/0.12mm Fine @BBL H2D.json index e9251415b4..b32a3b555b 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL H2D.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL H2D.json @@ -6,32 +6,59 @@ "setting_id": "GP142", "instantiation": "true", "bottom_shell_layers": "7", - "default_acceleration": [ - "4000", - "4000", - "4000", - "4000", - "4000" - ], - "gap_infill_speed": [ + "bridge_speed": [ + "50", + "50", "50", "50", "50", "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70", - "70", - "70", - "70" + "default_acceleration": [ + "4000", + "4000", + "4000", + "4000", + "4000", + "4000", + "4000" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" ], "initial_layer_speed": [ "40", "40", "40", "40", + "40", + "40", "40" ], "inner_wall_speed": [ @@ -39,6 +66,8 @@ "120", "120", "120", + "120", + "120", "120" ], "internal_solid_infill_speed": [ @@ -46,27 +75,71 @@ "150", "150", "150", + "150", + "150", "150" ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70", + "70", + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" ], "outer_wall_speed": [ "60", "60", "60", "60", + "60", + "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], "overhang_1_4_speed": [ "60", "60", "60", "60", + "60", + "60", "60" ], "overhang_2_4_speed": [ @@ -74,6 +147,8 @@ "30", "30", "30", + "30", + "30", "30" ], "overhang_3_4_speed": [ @@ -81,76 +156,26 @@ "10", "10", "10", + "10", + "10", "10" ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100", - "100" - ], - "top_color_penetration_layers": "7", - "top_shell_layers": "9", - "top_shell_thickness": "0.8", - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], - "inner_wall_acceleration": [ - "0", - "0", - "0", - "0", - "0" - ], "overhang_4_4_speed": [ "10", "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -158,36 +183,29 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -195,34 +213,167 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "top_shell_layers": "9", + "top_color_penetration_layers": "7", + "top_shell_thickness": "0.8", + "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150" ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", "500", "500", + "500", + "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL H2DP.json b/resources/profiles/BBL/process/0.12mm Fine @BBL H2DP.json index 3bb1e99970..cd0298e7ad 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL H2DP.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL H2DP.json @@ -6,6 +6,13 @@ "setting_id": "GP127", "instantiation": "true", "bottom_shell_layers": "7", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "4000", "4000", @@ -13,6 +20,20 @@ "4000", "4000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "50", "50", @@ -41,6 +62,20 @@ "150", "150" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ "70", "70", @@ -48,6 +83,13 @@ "70", "70" ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], "outer_wall_speed": [ "60", "60", @@ -83,64 +125,6 @@ "10", "10" ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100", - "100" - ], - "top_shell_layers": "9", - "top_color_penetration_layers": "7", - "top_shell_thickness": "0.8", - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], - "inner_wall_acceleration": [ - "0", - "0", - "0", - "0", - "0" - ], "overhang_4_4_speed": [ "10", "10", @@ -148,6 +132,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -162,6 +148,70 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100", + "100" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -183,26 +233,22 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ + "top_shell_layers": "9", + "top_color_penetration_layers": "7", + "top_shell_thickness": "0.8", + "top_surface_speed": [ "150", "150", "150", "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" ], "travel_acceleration": [ "10000", @@ -211,6 +257,13 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", @@ -218,11 +271,28 @@ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json index 96047bf831..2cbcf582e5 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL P1P.json @@ -26,10 +26,6 @@ "350", "350" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,22 +38,30 @@ "350", "350" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], "overhang_1_4_speed": [ "60", "60" @@ -70,10 +74,6 @@ "10", "10" ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], "overhang_4_4_speed": [ "10", "10" @@ -90,6 +90,14 @@ "430", "430" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json index 1758049a79..189e13972c 100644 --- a/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm Fine @BBL X1C.json @@ -26,10 +26,6 @@ "350", "350" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,22 +38,30 @@ "350", "350" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], "overhang_1_4_speed": [ "60", "60" @@ -70,10 +74,6 @@ "10", "10" ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], "overhang_4_4_speed": [ "10", "10" @@ -90,6 +90,14 @@ "430", "430" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json index d9caca6a9a..817744de26 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1.json @@ -1,41 +1,41 @@ { - "type": "process", - "name": "0.12mm High Quality @BBL A1", - "inherits": "fdm_process_single_0.12", - "from": "system", - "setting_id": "GP106", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000" - ], - "elefant_foot_compensation": "0.075", - "gap_infill_speed": [ - "230" - ], - "inner_wall_speed": [ - "150" - ], - "internal_solid_infill_speed": [ - "180" - ], - "outer_wall_acceleration": [ - "2000" - ], - "outer_wall_speed": [ - "60" - ], - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "180" - ], - "top_surface_speed": [ - "150" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.12mm High Quality @BBL A1", + "inherits": "fdm_process_single_0.12", + "from": "system", + "setting_id": "GP106", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "4000" + ], + "elefant_foot_compensation": "0.075", + "gap_infill_speed": [ + "230" + ], + "inner_wall_speed": [ + "150" + ], + "internal_solid_infill_speed": [ + "180" + ], + "outer_wall_acceleration": [ + "2000" + ], + "outer_wall_speed": [ + "60" + ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "180" + ], + "top_surface_speed": [ + "150" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json index 14b984a971..743c00ea98 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL A1M.json @@ -1,41 +1,41 @@ { - "type": "process", - "name": "0.12mm High Quality @BBL A1M", - "inherits": "fdm_process_single_0.12", - "from": "system", - "setting_id": "GP105", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "3000" - ], - "elefant_foot_compensation": "0", - "gap_infill_speed": [ - "230" - ], - "inner_wall_speed": [ - "150" - ], - "internal_solid_infill_speed": [ - "180" - ], - "outer_wall_speed": [ - "60" - ], - "outer_wall_acceleration": [ - "2000" - ], - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "180" - ], - "top_surface_speed": [ - "150" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.12mm High Quality @BBL A1M", + "inherits": "fdm_process_single_0.12", + "from": "system", + "setting_id": "GP105", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in almost negligible layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "3000" + ], + "elefant_foot_compensation": "0", + "gap_infill_speed": [ + "230" + ], + "inner_wall_speed": [ + "150" + ], + "internal_solid_infill_speed": [ + "180" + ], + "outer_wall_speed": [ + "60" + ], + "outer_wall_acceleration": [ + "2000" + ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "180" + ], + "top_surface_speed": [ + "150" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json index 9b7a3a9504..ca2cd88cd5 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL A2L.json @@ -9,7 +9,6 @@ "default_acceleration": [ "4000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" @@ -42,9 +41,6 @@ "slowdown_start_acc": [ "8000" ], - "slowdown_start_height": [ - "0" - ], "slowdown_start_speed": [ "500" ], diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2C.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2C.json index c6155c7395..68e1864560 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2C.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2C.json @@ -10,6 +10,7 @@ "4000", "4000", "4000", + "4000", "4000" ], "enable_tower_interface_features": "1", @@ -17,60 +18,70 @@ "50", "50", "50", + "50", "50" ], "initial_layer_infill_speed": [ "70", "70", "70", + "70", "70" ], "initial_layer_speed": [ "40", "40", "40", + "40", "40" ], "inner_wall_speed": [ "120", "120", "120", + "120", "120" ], "internal_solid_infill_speed": [ "150", "150", "150", + "150", "150" ], "outer_wall_acceleration": [ "2000", "2000", "2000", + "2000", "2000" ], "outer_wall_speed": [ "60", "60", "60", + "60", "60" ], "overhang_1_4_speed": [ "60", "60", "60", + "60", "60" ], "overhang_2_4_speed": [ "30", "30", "30", + "30", "30" ], "overhang_3_4_speed": [ "10", "10", "10", + "10", "10" ], "prime_tower_brim_width": "-1", @@ -80,6 +91,7 @@ "100", "100", "100", + "100", "100" ], "top_color_penetration_layers": "7", @@ -89,9 +101,199 @@ "150", "150", "150", + "150", "150" ], "compatible_printers": [ "Bambu Lab H2C 0.4 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "travel_speed": [ + "500", + "500", + "500", + "500", + "500" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json index 99aa118b84..53a8985a32 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL H2S.json @@ -5,164 +5,213 @@ "from": "system", "setting_id": "GP234", "instantiation": "true", + "bridge_speed": [ + "50", + "50", + "50" + ], "default_acceleration": [ + "4000", "4000", "4000" ], + "enable_height_slowdown": [ + "0", + "0", + "0" + ], + "enable_overhang_speed": [ + "1", + "1", + "1" + ], "gap_infill_speed": [ + "230", "230", "230" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ + "105", "105", "105" ], "initial_layer_speed": [ "50", - "50" - ], - "inner_wall_speed": [ - "150", - "150" - ], - "internal_solid_infill_speed": [ - "180", - "180" - ], - "outer_wall_acceleration": [ - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "60" - ], - "overhang_1_4_speed": [ - "60", - "60" - ], - "overhang_2_4_speed": [ - "30", - "30" - ], - "overhang_3_4_speed": [ - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "180", - "180" - ], - "top_color_penetration_layers": "7", - "top_surface_speed": [ - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" - ], - "bridge_speed": [ "50", "50" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], "inner_wall_acceleration": [ + "0", "0", "0" ], - "overhang_4_4_speed": [ + "inner_wall_speed": [ + "150", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "180", + "180", + "180" + ], + "monotonic_travel_into_wall": "45.0", + "outer_wall_acceleration": [ + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "60", + "60" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", "10", "10" ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "180", + "180", + "180" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], + "top_color_penetration_layers": "5", + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], + "top_surface_speed": [ + "150", + "150", + "150" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ + "500", "500", "500" ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json index 6cdae36ed1..d2a8ef5e2a 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL P1P.json @@ -26,6 +26,10 @@ "230", "230" ], + "initial_layer_speed": [ + "50", + "50" + ], "inner_wall_speed": [ "150", "150" @@ -34,34 +38,30 @@ "180", "180" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" + "outer_wall_speed": [ + "60", + "60" ], "outer_wall_acceleration": [ "2000", "2000" ], - "outer_wall_speed": [ - "60", - "60" - ], "overhang_1_4_speed": [ "60", "60" @@ -91,6 +91,14 @@ "180", "180" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json index 6f86d4824b..a9c9eb7bdf 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL P2S.json @@ -5,165 +5,212 @@ "from": "system", "setting_id": "GP207", "instantiation": "true", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "50", "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "4000", "4000", "4000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "230", "230", "230" ], + "initial_layer_speed": [ + "50", + "50", + "50" + ], "inner_wall_speed": [ + "150", "150", "150" ], "internal_solid_infill_speed": [ + "180", "180", "180" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" ], "outer_wall_speed": [ + "60", "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", + "60", "60" ], "overhang_2_4_speed": [ "60", + "30", "30" ], "overhang_3_4_speed": [ "40", + "10", "10" ], "overhang_4_4_speed": [ "20", + "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ + "180", "180", "180" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_color_penetration_layers": "7", + "top_color_penetration_layers": "5", "top_surface_speed": [ + "150", "150", "150" ], - "top_surface_pattern": "monotonic", + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ - "600", - "600" + "1000", + "1000", + "1000" ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json index 94f8634116..fe2ab3d3be 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL X1C.json @@ -26,6 +26,10 @@ "230", "230" ], + "initial_layer_speed": [ + "50", + "50" + ], "inner_wall_speed": [ "150", "150" @@ -34,34 +38,30 @@ "180", "180" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" + "outer_wall_speed": [ + "60", + "60" ], "outer_wall_acceleration": [ "2000", "2000" ], - "outer_wall_speed": [ - "60", - "60" - ], "overhang_1_4_speed": [ "60", "60" @@ -91,6 +91,14 @@ "180", "180" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.12mm High Quality @BBL X2D.json b/resources/profiles/BBL/process/0.12mm High Quality @BBL X2D.json index 38f954fd37..34ed640d32 100644 --- a/resources/profiles/BBL/process/0.12mm High Quality @BBL X2D.json +++ b/resources/profiles/BBL/process/0.12mm High Quality @BBL X2D.json @@ -7,6 +7,8 @@ "instantiation": "true", "bridge_flow": "1.5", "bridge_speed": [ + "25", + "25", "25", "25", "25", @@ -15,6 +17,8 @@ "default_acceleration": [ "4000", "4000", + "4000", + "1000", "1000", "1000" ], @@ -22,46 +26,62 @@ "initial_layer_infill_speed": [ "105", "70", + "70", + "100", "100", "100" ], "initial_layer_speed": [ "50", "40", + "40", + "50", "50", "50" ], "inner_wall_speed": [ "150", "120", + "120", + "100", "100", "100" ], "internal_solid_infill_speed": [ "180", "150", + "150", + "100", "100", "100" ], "outer_wall_acceleration": [ "2000", "2000", + "2000", + "1000", "1000", "1000" ], "outer_wall_speed": [ "60", "60", + "60", + "50", "50", "50" ], "overhang_2_4_speed": [ + "40", + "40", "40", "40", "40", "40" ], "overhang_4_4_speed": [ + "20", + "20", "20", "20", "20", @@ -72,24 +92,40 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "150", "100", "100", + "100", + "100", "100" ], - "top_color_penetration_layers": "7", + "top_color_penetration_layers": "5", "top_surface_speed": [ "150", "150", + "150", + "100", "100", "100" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -97,5 +133,205 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.4 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" ] } diff --git a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json index b0186048dd..2523024fbc 100644 --- a/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.12mm Standard @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "5000", "5000" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1 0.2 nozzle.json index 0b09340a5f..c8bae15c77 100644 --- a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1 0.2 nozzle.json @@ -1,25 +1,25 @@ { - "type": "process", - "name": "0.14mm Extra Draft @BBL A1 0.2 nozzle", - "inherits": "fdm_process_single_0.14_nozzle_0.2", - "from": "system", - "setting_id": "GP087", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "initial_layer_infill_speed": [ - "28" - ], - "initial_layer_speed": [ - "16" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.2 nozzle" - ] -} + "type": "process", + "name": "0.14mm Extra Draft @BBL A1 0.2 nozzle", + "inherits": "fdm_process_single_0.14_nozzle_0.2", + "from": "system", + "setting_id": "GP087", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "initial_layer_infill_speed": [ + "28" + ], + "initial_layer_speed": [ + "16" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json index 1d29cc9b0f..df0cdaa63c 100644 --- a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL A1M 0.2 nozzle.json @@ -1,24 +1,24 @@ { - "type": "process", - "name": "0.14mm Extra Draft @BBL A1M 0.2 nozzle", - "inherits": "fdm_process_single_0.14_nozzle_0.2", - "from": "system", - "setting_id": "GP053", - "instantiation": "true", - "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "initial_layer_speed": [ - "16" - ], - "initial_layer_infill_speed": [ - "28" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.2 nozzle" - ] -} + "type": "process", + "name": "0.14mm Extra Draft @BBL A1M 0.2 nozzle", + "inherits": "fdm_process_single_0.14_nozzle_0.2", + "from": "system", + "setting_id": "GP053", + "instantiation": "true", + "description": "Compared with the default profile of a 0.2 mm nozzle, it has a bigger layer height, and results in slightly visible layer lines, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "initial_layer_speed": [ + "16" + ], + "initial_layer_infill_speed": [ + "28" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.2 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json index 437f17bf44..27bead46f0 100644 --- a/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Extra Draft @BBL P1P 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "2500", "2500" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json index 8e36589ccd..ad94671a99 100644 --- a/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/BBL/process/0.14mm Standard @BBL X1C 0.2 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "70", - "70" - ], "initial_layer_speed": [ "40", "40" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,6 +43,22 @@ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "70", + "70" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" + ], "outer_wall_acceleration": [ "5000", "5000" @@ -75,10 +79,6 @@ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json index e1196f39ed..02e5ea0d9f 100644 --- a/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json +++ b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2D.json @@ -6,18 +6,59 @@ "setting_id": "GP174", "instantiation": "true", "description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "4000", "4000", "4000", "4000", + "4000", + "4000", "4000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], "initial_layer_speed": [ "50", "50", "50", "50", + "50", + "50", "50" ], "inner_wall_speed": [ @@ -25,96 +66,35 @@ "150", "150", "150", + "150", + "150", "150" ], "internal_solid_infill_speed": [ "180", "180", - "180", - "180", - "180" - ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "60", - "60", - "60", - "60" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60", - "60" - ], - "overhang_2_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "overhang_3_4_speed": [ - "10", - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ "180", "180", "180", "180", "180" ], - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250", - "250" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500", "500", "500", + "500", + "500", "500" ], "initial_layer_infill_speed": [ @@ -122,32 +102,80 @@ "105", "105", "105", + "105", + "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], - "overhang_4_4_speed": [ + "outer_wall_speed": [ + "60", + "60", + "60", + "60", + "60", + "60", + "60" + ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60", + "60", + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", + "10", "10", "10", "10", "10", "10" ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10", + "10" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -155,36 +183,29 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "180", + "180", + "180", + "180", + "180", + "180", + "180" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -192,34 +213,164 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150" ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", "500", "500", + "500", + "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2DP.json b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2DP.json index a759744dac..80f0b0671d 100644 --- a/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2DP.json +++ b/resources/profiles/BBL/process/0.16mm Balanced Quality @BBL H2DP.json @@ -6,6 +6,13 @@ "setting_id": "GP129", "instantiation": "true", "description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "4000", "4000", @@ -13,6 +20,27 @@ "4000", "4000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250" + ], "initial_layer_speed": [ "50", "50", @@ -34,6 +62,34 @@ "180", "180" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], "outer_wall_speed": [ "60", "60", @@ -69,75 +125,6 @@ "10", "10" ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "180", - "180", - "180", - "180", - "180" - ], - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250", - "250" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105", - "105" - ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], - "inner_wall_acceleration": [ - "0", - "0", - "0", - "0", - "0" - ], "overhang_4_4_speed": [ "10", "10", @@ -145,6 +132,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -159,6 +148,70 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "180", + "180", + "180", + "180", + "180" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -180,27 +233,13 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ + "top_surface_speed": [ "150", "150", "150", "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], "travel_acceleration": [ "10000", "10000", @@ -208,6 +247,13 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", @@ -215,11 +261,35 @@ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json index c2d82c45d8..4a61503a61 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1.json @@ -1,41 +1,41 @@ { - "type": "process", - "name": "0.16mm High Quality @BBL A1", - "inherits": "fdm_process_single_0.16", - "from": "system", - "setting_id": "GP110", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "4000" - ], - "elefant_foot_compensation": "0.075", - "gap_infill_speed": [ - "250" - ], - "inner_wall_speed": [ - "150" - ], - "internal_solid_infill_speed": [ - "200" - ], - "outer_wall_acceleration": [ - "2000" - ], - "outer_wall_speed": [ - "60" - ], - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "200" - ], - "top_surface_speed": [ - "150" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.16mm High Quality @BBL A1", + "inherits": "fdm_process_single_0.16", + "from": "system", + "setting_id": "GP110", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "4000" + ], + "elefant_foot_compensation": "0.075", + "gap_infill_speed": [ + "250" + ], + "inner_wall_speed": [ + "150" + ], + "internal_solid_infill_speed": [ + "200" + ], + "outer_wall_acceleration": [ + "2000" + ], + "outer_wall_speed": [ + "60" + ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "200" + ], + "top_surface_speed": [ + "150" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json index c0caba2edb..1b8de9eb36 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A1M.json @@ -1,41 +1,41 @@ { - "type": "process", - "name": "0.16mm High Quality @BBL A1M", - "inherits": "fdm_process_single_0.16", - "from": "system", - "setting_id": "GP109", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.", - "default_acceleration": [ - "3000" - ], - "elefant_foot_compensation": "0", - "gap_infill_speed": [ - "250" - ], - "inner_wall_speed": [ - "150" - ], - "internal_solid_infill_speed": [ - "200" - ], - "outer_wall_speed": [ - "60" - ], - "outer_wall_acceleration": [ - "2000" - ], - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "200" - ], - "top_surface_speed": [ - "150" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.16mm High Quality @BBL A1M", + "inherits": "fdm_process_single_0.16", + "from": "system", + "setting_id": "GP109", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, lower speeds and acceleration, and the sparse infill pattern is Gyroid. So, it results in less apparent layer lines and much higher printing quality, but much longer printing time.", + "default_acceleration": [ + "3000" + ], + "elefant_foot_compensation": "0", + "gap_infill_speed": [ + "250" + ], + "inner_wall_speed": [ + "150" + ], + "internal_solid_infill_speed": [ + "200" + ], + "outer_wall_speed": [ + "60" + ], + "outer_wall_acceleration": [ + "2000" + ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "200" + ], + "top_surface_speed": [ + "150" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json index 5c75e20bdd..846de8781b 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL A2L.json @@ -9,7 +9,6 @@ "default_acceleration": [ "4000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" @@ -42,9 +41,6 @@ "slowdown_start_acc": [ "8000" ], - "slowdown_start_height": [ - "0" - ], "slowdown_start_speed": [ "500" ], diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2C.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2C.json index c5b4a93f93..6cd4abbb4f 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2C.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2C.json @@ -10,6 +10,7 @@ "4000", "4000", "4000", + "4000", "4000" ], "enable_tower_interface_features": "1", @@ -17,50 +18,58 @@ "50", "50", "50", + "50", "50" ], "inner_wall_speed": [ "150", "150", "150", + "150", "150" ], "internal_solid_infill_speed": [ "180", "180", "180", + "180", "180" ], - "ironing_speed": "20", "ironing_flow": "25%", + "ironing_speed": "20", "outer_wall_acceleration": [ "2000", "2000", "2000", + "2000", "2000" ], "outer_wall_speed": [ "60", "60", "60", + "60", "60" ], "overhang_1_4_speed": [ "60", "60", "60", + "60", "60" ], "overhang_2_4_speed": [ "30", "30", "30", + "30", "30" ], "overhang_3_4_speed": [ "10", "10", "10", + "10", "10" ], "prime_tower_brim_width": "-1", @@ -70,15 +79,220 @@ "180", "180", "180", + "180", "180" ], "top_surface_speed": [ "150", "150", "150", + "150", "150" ], "compatible_printers": [ "Bambu Lab H2C 0.4 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "travel_speed": [ + "500", + "500", + "500", + "500", + "500" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json index 903eb3749d..9aa48c1f6b 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL H2S.json @@ -6,163 +6,214 @@ "setting_id": "GP235", "instantiation": "true", "description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.", - "default_acceleration": [ - "4000", - "4000" - ], - "initial_layer_speed": [ + "bridge_speed": [ + "50", "50", "50" ], - "inner_wall_speed": [ - "150", - "150" + "default_acceleration": [ + "4000", + "4000", + "4000" ], - "internal_solid_infill_speed": [ - "200", - "200" + "enable_height_slowdown": [ + "0", + "0", + "0" ], - "outer_wall_acceleration": [ - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "60" - ], - "overhang_1_4_speed": [ - "60", - "60" - ], - "overhang_2_4_speed": [ - "30", - "30" - ], - "overhang_3_4_speed": [ - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_pattern": "gyroid", - "sparse_infill_speed": [ - "200", - "200" - ], - "top_surface_speed": [ - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" + "enable_overhang_speed": [ + "1", + "1", + "1" ], "gap_infill_speed": [ + "250", "250", "250" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ + "105", "105", "105" ], - "bridge_speed": [ + "initial_layer_speed": [ + "50", "50", "50" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], "inner_wall_acceleration": [ + "0", "0", "0" ], - "overhang_4_4_speed": [ + "inner_wall_speed": [ + "150", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "200", + "200", + "200" + ], + "ironing_flow": "25%", + "ironing_speed": "20", + "monotonic_travel_into_wall": "45.0", + "outer_wall_acceleration": [ + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", + "60", + "60" + ], + "overhang_1_4_speed": [ + "60", + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", "10", "10" ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "200", + "200", + "200" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], + "top_surface_speed": [ + "150", + "150", + "150" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ + "500", "500", "500" ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json index b7b7d2bd55..b89509d26e 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL P1P.json @@ -26,6 +26,10 @@ "250", "250" ], + "initial_layer_speed": [ + "50", + "50" + ], "inner_wall_speed": [ "150", "150" @@ -34,34 +38,30 @@ "200", "200" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" + "outer_wall_speed": [ + "60", + "60" ], "outer_wall_acceleration": [ "2000", "2000" ], - "outer_wall_speed": [ - "60", - "60" - ], "overhang_1_4_speed": [ "60", "60" @@ -91,6 +91,14 @@ "200", "200" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json index 65e4674832..4d6e809633 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL P2S.json @@ -6,164 +6,211 @@ "setting_id": "GP208", "instantiation": "true", "description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "50", "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "4000", "4000", "4000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "250", "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50" + ], "inner_wall_speed": [ + "150", "150", "150" ], "internal_solid_infill_speed": [ + "200", "200", "200" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "outer_wall_acceleration": [ - "2000", - "2000" + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" ], "outer_wall_speed": [ + "60", "60", "60" ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000" + ], "overhang_1_4_speed": [ + "60", "60", "60" ], "overhang_2_4_speed": [ + "30", "30", "30" ], "overhang_3_4_speed": [ + "10", "10", "10" ], "overhang_4_4_speed": [ + "10", "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ + "200", "200", "200" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ + "150", "150", "150" ], - "top_surface_pattern": "monotonic", + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ - "600", - "600" + "1000", + "1000", + "1000" ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json index 0e281022a3..851eb8617c 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL X1C.json @@ -26,6 +26,10 @@ "250", "250" ], + "initial_layer_speed": [ + "50", + "50" + ], "inner_wall_speed": [ "150", "150" @@ -34,34 +38,30 @@ "200", "200" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" + "outer_wall_speed": [ + "60", + "60" ], "outer_wall_acceleration": [ "2000", "2000" ], - "outer_wall_speed": [ - "60", - "60" - ], "overhang_1_4_speed": [ "60", "60" @@ -91,6 +91,14 @@ "200", "200" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.16mm High Quality @BBL X2D.json b/resources/profiles/BBL/process/0.16mm High Quality @BBL X2D.json index 4b5cf6a1b5..ceb4632c88 100644 --- a/resources/profiles/BBL/process/0.16mm High Quality @BBL X2D.json +++ b/resources/profiles/BBL/process/0.16mm High Quality @BBL X2D.json @@ -8,6 +8,8 @@ "description": "High quality profile for 0.16mm layer height, prioritizing print quality and strength.", "bridge_flow": "1.5", "bridge_speed": [ + "25", + "25", "25", "25", "25", @@ -16,11 +18,15 @@ "default_acceleration": [ "4000", "4000", + "4000", + "1000", "1000", "1000" ], "enable_tower_interface_features": "1", "initial_layer_speed": [ + "50", + "50", "50", "50", "50", @@ -29,34 +35,46 @@ "inner_wall_speed": [ "150", "150", + "150", + "100", "100", "100" ], "internal_solid_infill_speed": [ "180", "180", + "180", + "100", "100", "100" ], "outer_wall_acceleration": [ "2000", "2000", + "2000", + "1000", "1000", "1000" ], "outer_wall_speed": [ "60", "60", + "60", + "50", "50", "50" ], "overhang_2_4_speed": [ + "40", + "40", "40", "40", "40", "40" ], "overhang_4_4_speed": [ + "20", + "20", "20", "20", "20", @@ -67,23 +85,39 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "180", "180", + "180", + "100", "100", "100" ], "top_surface_speed": [ "150", "150", + "150", + "100", "100", "100" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -91,5 +125,213 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.4 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" ] } diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1.json index 17541349bf..6525558f7d 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.16mm Optimal @BBL A1", - "inherits": "fdm_process_single_0.16", - "from": "system", - "setting_id": "GP078", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.16mm Optimal @BBL A1", + "inherits": "fdm_process_single_0.16", + "from": "system", + "setting_id": "GP078", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json index bb129e5b79..cfc292d56e 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL A1M.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.16mm Optimal @BBL A1M", - "inherits": "fdm_process_single_0.16", - "from": "system", - "setting_id": "GP045", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.16mm Optimal @BBL A1M", + "inherits": "fdm_process_single_0.16", + "from": "system", + "setting_id": "GP045", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json index 4f536ba2cf..a2b0b19939 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL P1P.json @@ -26,10 +26,6 @@ "300", "300" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,22 +38,30 @@ "300", "300" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], "overhang_1_4_speed": [ "60", "60" @@ -70,10 +74,6 @@ "10", "10" ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], "overhang_4_4_speed": [ "10", "10" @@ -90,6 +90,14 @@ "330", "330" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json index 867d939dce..247807f042 100644 --- a/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json +++ b/resources/profiles/BBL/process/0.16mm Optimal @BBL X1C.json @@ -26,10 +26,6 @@ "300", "300" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,22 +38,30 @@ "300", "300" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], "overhang_1_4_speed": [ "60", "60" @@ -70,10 +74,6 @@ "10", "10" ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], "overhang_4_4_speed": [ "10", "10" @@ -90,6 +90,14 @@ "330", "330" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json index b3eef2ee33..99b6f0e969 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL A2L.json @@ -9,7 +9,6 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" @@ -27,9 +26,6 @@ "slowdown_start_acc": [ "8000" ], - "slowdown_start_height": [ - "0" - ], "slowdown_start_speed": [ "500" ], diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL H2C.json b/resources/profiles/BBL/process/0.16mm Standard @BBL H2C.json index 6c532d3d77..cf5f5492af 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL H2C.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL H2C.json @@ -10,6 +10,7 @@ "8000", "8000", "8000", + "8000", "8000" ], "enable_tower_interface_features": "1", @@ -17,11 +18,13 @@ "50", "50", "50", + "50", "50" ], "internal_solid_infill_speed": [ "250", "300", + "300", "250", "300" ], @@ -29,24 +32,28 @@ "200", "200", "200", + "200", "200" ], "overhang_1_4_speed": [ "60", "60", "60", + "60", "60" ], "overhang_2_4_speed": [ "30", "30", "30", + "30", "30" ], "overhang_3_4_speed": [ "10", "10", "10", + "10", "10" ], "prime_tower_brim_width": "-1", @@ -54,6 +61,7 @@ "sparse_infill_speed": [ "350", "600", + "600", "350", "600" ], @@ -61,9 +69,227 @@ "1000", "1000", "1000", + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2C 0.4 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL H2D.json b/resources/profiles/BBL/process/0.16mm Standard @BBL H2D.json index 3bf6f6ae7f..58d9431dc5 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL H2D.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL H2D.json @@ -6,86 +6,95 @@ "setting_id": "GP143", "instantiation": "true", "description": "Standard profile for 0.16mm layer height, prioritizing speed.", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "8000", "8000", "8000", "8000", + "8000", + "8000", "8000" ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60", - "60" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], "enable_overhang_speed": [ "1", "1", "1", "1", + "1", + "1", "1" ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", "gap_infill_speed": [ "250", "250", "250", "250", + "250", + "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "300", + "250", + "300", + "300", + "300" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500", "500", "500", + "500", + "500", "500" ], "initial_layer_infill_speed": [ @@ -93,41 +102,53 @@ "105", "105", "105", + "105", + "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300", - "300" + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" ], "outer_wall_acceleration": [ "5000", "5000", "5000", "5000", + "5000", + "5000", "5000" ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60", + "60", + "60", + "60" + ], "overhang_2_4_speed": [ "50", "50", "50", "50", + "50", + "50", "50" ], "overhang_3_4_speed": [ @@ -135,6 +156,8 @@ "30", "30", "30", + "30", + "30", "30" ], "overhang_4_4_speed": [ @@ -142,11 +165,17 @@ "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -154,36 +183,28 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_speed": [ + "350", + "600", + "600", + "350", + "600", + "600", + "600" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -191,34 +212,164 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" ], "top_surface_speed": [ "200", "200", "200", "200", + "200", + "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL H2DP.json b/resources/profiles/BBL/process/0.16mm Standard @BBL H2DP.json index fa625ded59..af0d5ef4cb 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL H2DP.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL H2DP.json @@ -6,60 +6,6 @@ "setting_id": "GP128", "instantiation": "true", "description": "Standard profile for 0.16mm layer height, prioritizing speed.", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_1_4_speed": [ - "60", - "60", - "60", - "60", - "60" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], "bridge_speed": [ "50", "50", @@ -67,6 +13,13 @@ "50", "50" ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000", + "8000" + ], "enable_overhang_speed": [ "1", "1", @@ -74,6 +27,13 @@ "1", "1" ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "250", "250", @@ -81,6 +41,34 @@ "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300", + "300" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500", @@ -95,13 +83,6 @@ "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", @@ -109,12 +90,12 @@ "0", "0" ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300", - "300" + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200" ], "outer_wall_acceleration": [ "5000", @@ -123,6 +104,13 @@ "5000", "5000" ], + "overhang_1_4_speed": [ + "60", + "60", + "60", + "60", + "60" + ], "overhang_2_4_speed": [ "50", "50", @@ -144,6 +132,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -158,6 +148,69 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_speed": [ + "350", + "600", + "350", + "600", + "600" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -179,27 +232,6 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], "top_surface_speed": [ "200", "200", @@ -214,11 +246,49 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json index ec829b7ee4..8291be1cb1 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL H2S.json @@ -7,157 +7,206 @@ "instantiation": "true", "description": "Standard profile for 0.16mm layer height, prioritizing speed.", "bridge_speed": [ + "50", "50", "50" ], "default_acceleration": [ + "10000", "10000", "10000" ], - "enable_overhang_speed": [ - "1", - "1" - ], "enable_height_slowdown": [ "0", - "0" - ], - "gap_infill_speed": [ - "250", - "250" - ], - "initial_layer_speed": [ - "50", - "50" - ], - "internal_solid_infill_speed": [ - "250", - "300" - ], - "inner_wall_speed": [ - "300", - "300" - ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ "0", "0" ], + "enable_overhang_speed": [ + "1", + "1", + "1" + ], + "gap_infill_speed": [ + "250", + "250", + "250" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], + "inner_wall_speed": [ + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "300" + ], + "monotonic_travel_into_wall": "45.0", + "outer_wall_acceleration": [ + "5000", + "5000", + "5000" + ], "outer_wall_speed": [ + "200", "200", "200" ], "overhang_1_4_speed": [ + "60", "60", "60" ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], "overhang_2_4_speed": [ + "30", "30", "30" ], "overhang_3_4_speed": [ + "10", "10", "10" ], "overhang_4_4_speed": [ + "10", "10", "10" ], "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], - "prime_tower_flat_ironing": "1", - "sparse_infill_speed": [ - "350", - "600" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ + "slowdown_end_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], - "slowdown_end_acc": [ + "slowdown_start_acc": [ + "100000", "100000", "100000" ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" + ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_speed": [ + "350", + "600", + "600" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], - "travel_speed": [ - "1000", - "1000" - ], - "travel_acceleration": [ - "10000", - "10000" + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "top_surface_speed": [ + "200", "200", "200" ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json index ba295d7a52..657b0b7c38 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL P2S.json @@ -6,163 +6,210 @@ "setting_id": "GP209", "instantiation": "true", "description": "Standard profile for 0.16mm layer height, prioritizing speed.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "50", "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "10000", "10000", "10000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ "250", - "250" - ], - "internal_solid_infill_speed": [ "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ + "50", "50", "50" ], "inner_wall_speed": [ + "300", "300", "300" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" + "internal_solid_infill_speed": [ + "250", + "250", + "250" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "outer_wall_speed": [ + "200", "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000" + ], "overhang_1_4_speed": [ + "60", "60", "60" ], "overhang_2_4_speed": [ + "30", "30", "30" ], "overhang_3_4_speed": [ "10", - "10" - ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], - "overhang_4_4_speed": [ "10", "10" ], - "prime_tower_brim_width": "-1", + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ + "270", "270", "270" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ + "150", "150", "150" ], - "top_surface_pattern": "monotonic", + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ - "600", - "600" + "1000", + "1000", + "1000" ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.16mm Standard @BBL X2D.json b/resources/profiles/BBL/process/0.16mm Standard @BBL X2D.json index d88dfcd60d..9057cd2b9f 100644 --- a/resources/profiles/BBL/process/0.16mm Standard @BBL X2D.json +++ b/resources/profiles/BBL/process/0.16mm Standard @BBL X2D.json @@ -8,6 +8,8 @@ "description": "Standard profile for 0.16mm layer height, prioritizing speed.", "bridge_flow": "1.5", "bridge_speed": [ + "25", + "25", "25", "25", "25", @@ -16,6 +18,8 @@ "default_acceleration": [ "10000", "8000", + "8000", + "1000", "1000", "1000" ], @@ -24,9 +28,13 @@ "50", "250", "250", + "250", + "250", "250" ], "initial_layer_speed": [ + "50", + "50", "50", "50", "50", @@ -35,22 +43,30 @@ "internal_solid_infill_speed": [ "250", "300", + "300", + "100", "100", "100" ], "outer_wall_speed": [ "200", "200", + "200", + "50", "50", "50" ], "overhang_2_4_speed": [ + "40", + "40", "40", "40", "40", "40" ], "overhang_4_4_speed": [ + "20", + "20", "20", "20", "20", @@ -61,12 +77,24 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_speed": [ "270", "600", + "600", + "100", "100", "100" ], @@ -74,9 +102,13 @@ "150", "200", "200", + "200", + "200", "200" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -84,5 +116,221 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.4 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300", + "300" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" ] } diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json index 8995eeb48f..fb98427904 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL A2L 0.6 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2C 0.6 nozzle.json index 4c0bebdccc..c10546eb03 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2C 0.6 nozzle.json @@ -10,6 +10,7 @@ "8000", "8000", "8000", + "8000", "8000" ], "enable_tower_interface_features": "1", @@ -17,36 +18,42 @@ "105", "105", "105", + "105", "105" ], "initial_layer_speed": [ "50", "50", "50", + "50", "50" ], "inner_wall_speed": [ "300", "300", "300", + "300", "300" ], "internal_solid_infill_speed": [ "250", "250", "250", + "250", "250" ], "outer_wall_speed": [ "200", "200", "200", + "200", "200" ], "overhang_3_4_speed": [ "30", "30", "30", + "30", "30" ], "prime_tower_brim_width": "-1", @@ -55,21 +62,234 @@ "350", "350", "350", + "350", "350" ], "top_surface_speed": [ "200", "200", "200", + "200", "200" ], "travel_speed": [ "1000", "1000", "1000", + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2C 0.6 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2D 0.6 nozzle.json index 8acb76fa22..fdb6aa1b45 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2D 0.6 nozzle.json @@ -11,6 +11,8 @@ "50", "50", "50", + "50", + "50", "50" ], "default_acceleration": [ @@ -18,27 +20,45 @@ "8000", "8000", "8000", + "8000", + "8000", "8000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", "gap_infill_speed": [ "250", "250", "250", "250", + "250", + "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105", - "105" - ], "initial_layer_speed": [ "50", "50", "50", "50", + "50", + "50", "50" ], "inner_wall_speed": [ @@ -46,88 +66,71 @@ "300", "300", "300", + "300", + "300", "300" ], "internal_solid_infill_speed": [ "250", "300", + "300", "250", "300", + "300", "300" ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], "initial_layer_travel_acceleration": [ "6000", "6000", "6000", "6000", + "6000", + "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], "outer_wall_acceleration": [ "5000", "5000", "5000", "5000", + "5000", + "5000", "5000" ], "overhang_1_4_speed": [ @@ -135,6 +138,8 @@ "0", "0", "0", + "0", + "0", "0" ], "overhang_2_4_speed": [ @@ -142,18 +147,35 @@ "50", "50", "50", + "50", + "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], "overhang_4_4_speed": [ "10", "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -161,36 +183,28 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_speed": [ + "350", + "600", + "600", + "350", + "600", + "600", + "600" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -198,27 +212,164 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2DP 0.6 nozzle.json index 617f91bb1a..6f9b6e8f61 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2DP 0.6 nozzle.json @@ -20,6 +20,20 @@ "8000", "8000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "250", "250", @@ -48,59 +62,12 @@ "300", "300" ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105", - "105" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" ], "initial_layer_acceleration": [ "500", @@ -109,12 +76,12 @@ "500", "500" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" ], "inner_wall_acceleration": [ "0", @@ -123,6 +90,13 @@ "0", "0" ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200" + ], "outer_wall_acceleration": [ "5000", "5000", @@ -144,6 +118,13 @@ "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30" + ], "overhang_4_4_speed": [ "10", "10", @@ -151,6 +132,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -165,6 +148,69 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_speed": [ + "350", + "600", + "350", + "600", + "600" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -186,26 +232,12 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200" ], "travel_acceleration": [ "10000", @@ -214,11 +246,49 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json index c0061a0b41..e0742fac98 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL H2S 0.6 nozzle.json @@ -7,162 +7,211 @@ "instantiation": "true", "description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.", "bridge_speed": [ + "30", "30", "30" ], "default_acceleration": [ + "10000", "10000", "10000" ], + "elefant_foot_compensation": "0.15", + "enable_height_slowdown": [ + "0", + "0", + "0" + ], + "enable_overhang_speed": [ + "1", + "1", + "1" + ], "gap_infill_speed": [ + "50", "50", "50" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ + "105", "105", "105" ], "initial_layer_speed": [ + "50", "50", "50" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "inner_wall_speed": [ + "300", "300", "300" ], "internal_solid_infill_speed": [ + "250", "250", "250" ], - "outer_wall_speed": [ - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "350" - ], - "top_surface_speed": [ - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], + "monotonic_travel_into_wall": "45.0", "outer_wall_acceleration": [ + "5000", "5000", "5000" ], + "outer_wall_speed": [ + "200", + "200", + "200" + ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30" + ], "overhang_4_4_speed": [ + "10", "10", "10" ], + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_speed": [ + "350", + "350", + "350" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], + "top_surface_speed": [ + "200", + "200", + "200" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json index 74dccd56d7..4d2722df04 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL P2S 0.6 nozzle.json @@ -6,163 +6,210 @@ "setting_id": "GP210", "instantiation": "true", "description": "High quality profile for 0.6mm nozzle, prioritizing print quality and strength.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "30", "30", "30" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "10000", "10000", "10000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "50", "50", "50" ], + "initial_layer_speed": [ + "35", + "35", + "35" + ], "inner_wall_speed": [ + "300", "300", "300" ], "internal_solid_infill_speed": [ + "250", "250", "250" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "35" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "outer_wall_speed": [ + "200", "200", "200" ], - "overhang_3_4_speed": [ - "15", - "15" - ], "outer_wall_acceleration": [ + "5000", "5000", "5000" ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15", + "15" + ], "overhang_4_4_speed": [ + "10", "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ + "270", "270", "270" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], "top_surface_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.6 nozzle" ] diff --git a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL X2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL X2D 0.6 nozzle.json index 12852d7a3c..010af18bdb 100644 --- a/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL X2D 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Balanced Quality @BBL X2D 0.6 nozzle.json @@ -9,12 +9,16 @@ "bridge_speed": [ "30", "50", + "50", + "30", "30", "30" ], "default_acceleration": [ "10000", "8000", + "8000", + "4000", "4000", "4000" ], @@ -22,42 +26,56 @@ "gap_infill_speed": [ "50", "250", + "250", + "50", "50", "50" ], "initial_layer_infill_speed": [ "55", "105", + "105", + "55", "55", "55" ], "initial_layer_speed": [ "35", "50", + "50", + "20", "20", "20" ], "inner_wall_speed": [ "300", "300", + "300", + "150", "150", "150" ], "internal_solid_infill_speed": [ "250", "300", + "300", + "150", "150", "150" ], "outer_wall_speed": [ "200", "200", + "200", + "50", "50", "50" ], "overhang_3_4_speed": [ "15", "30", + "30", + "15", "15", "15" ], @@ -66,22 +84,38 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_speed": [ "270", "600", + "600", + "100", "100", "100" ], "top_surface_speed": [ "150", "200", + "200", + "150", "150", "150" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -89,5 +123,213 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.6 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" ] } diff --git a/resources/profiles/BBL/process/0.18mm Fine @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Fine @BBL A1 0.6 nozzle.json index 94f8bad6bc..a8c2761a81 100644 --- a/resources/profiles/BBL/process/0.18mm Fine @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Fine @BBL A1 0.6 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.18mm Fine @BBL A1 0.6 nozzle", - "inherits": "fdm_process_single_0.18_nozzle_0.6", - "from": "system", - "setting_id": "GP088", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "process", + "name": "0.18mm Fine @BBL A1 0.6 nozzle", + "inherits": "fdm_process_single_0.18_nozzle_0.6", + "from": "system", + "setting_id": "GP088", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json index f37ba30341..c15f066e13 100644 --- a/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Fine @BBL A1M 0.6 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.18mm Fine @BBL A1M 0.6 nozzle", - "inherits": "fdm_process_single_0.18_nozzle_0.6", - "from": "system", - "setting_id": "GP062", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle" - ] -} + "type": "process", + "name": "0.18mm Fine @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_single_0.18_nozzle_0.6", + "from": "system", + "setting_id": "GP062", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json index 9598dfcfea..8adb7b6da1 100644 --- a/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Fine @BBL P1P 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json index b865adf071..d3ade4fa48 100644 --- a/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.18mm Standard @BBL X1C 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json index a58086b7ec..a7786842e9 100644 --- a/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json +++ b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2D.json @@ -7,18 +7,59 @@ "instantiation": "true", "description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.", "bottom_shell_layers": "4", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "4000", "4000", "4000", "4000", + "4000", + "4000", "4000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], "initial_layer_speed": [ "50", "50", "50", "50", + "50", + "50", "50" ], "inner_wall_speed": [ @@ -26,89 +67,35 @@ "150", "150", "150", + "150", + "150", "150" ], "internal_solid_infill_speed": [ "200", "200", - "200", - "200", - "200" - ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "60", - "60", - "60", - "60" - ], - "overhang_2_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "overhang_3_4_speed": [ - "10", - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ "200", "200", "200", "200", "200" ], - "top_shell_layers": "6", - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250", - "250" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500", "500", "500", + "500", + "500", "500" ], "initial_layer_infill_speed": [ @@ -116,39 +103,80 @@ "105", "105", "105", + "105", + "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], + "outer_wall_speed": [ + "60", + "60", + "60", + "60", + "60", + "60", + "60" + ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0", "0", "0", + "0", + "0", "0" ], - "overhang_4_4_speed": [ + "overhang_2_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", + "10", "10", "10", "10", "10", "10" ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10", + "10" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -156,36 +184,28 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -193,34 +213,165 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "top_shell_layers": "6", + "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150" ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", "500", "500", + "500", + "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2DP.json b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2DP.json index 4f5abb11f2..f807f6375e 100644 --- a/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2DP.json +++ b/resources/profiles/BBL/process/0.20mm Balanced Strength @BBL H2DP.json @@ -7,6 +7,13 @@ "instantiation": "true", "description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.", "bottom_shell_layers": "4", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "4000", "4000", @@ -14,6 +21,27 @@ "4000", "4000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250" + ], "initial_layer_speed": [ "50", "50", @@ -35,74 +63,12 @@ "200", "200" ], - "outer_wall_speed": [ - "60", - "60", - "60", - "60", - "60" - ], - "outer_wall_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], - "overhang_2_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "overhang_3_4_speed": [ - "10", - "10", - "10", - "10", - "10" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "top_shell_layers": "6", - "top_surface_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250", - "250" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" ], "initial_layer_acceleration": [ "500", @@ -118,13 +84,6 @@ "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", @@ -132,6 +91,20 @@ "0", "0" ], + "outer_wall_speed": [ + "60", + "60", + "60", + "60", + "60" + ], + "outer_wall_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], "overhang_1_4_speed": [ "0", "0", @@ -139,6 +112,20 @@ "0", "0" ], + "overhang_2_4_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], "overhang_4_4_speed": [ "10", "10", @@ -146,6 +133,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -160,6 +149,69 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_speed": [ + "200", + "200", + "200", + "200", + "200" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -181,27 +233,14 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ + "top_shell_layers": "6", + "top_surface_speed": [ "150", "150", "150", "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], "travel_acceleration": [ "10000", "10000", @@ -209,6 +248,13 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], "travel_speed": [ "500", "500", @@ -216,11 +262,35 @@ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json index d7c3d6468d..6fbf2559c6 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL A2L.json @@ -9,7 +9,6 @@ "default_acceleration": [ "4000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" @@ -47,9 +46,6 @@ "slowdown_start_acc": [ "8000" ], - "slowdown_start_height": [ - "0" - ], "slowdown_start_speed": [ "500" ], diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2C.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2C.json index 720e1cbcc7..fa5950da15 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2C.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2C.json @@ -11,6 +11,7 @@ "4000", "4000", "4000", + "4000", "4000" ], "enable_tower_interface_features": "1", @@ -18,48 +19,56 @@ "50", "50", "50", + "50", "50" ], "inner_wall_speed": [ "150", "150", "150", + "150", "150" ], "internal_solid_infill_speed": [ "200", "200", "200", + "200", "200" ], "outer_wall_acceleration": [ "2000", "2000", "2000", + "2000", "2000" ], "outer_wall_speed": [ "60", "60", "60", + "60", "60" ], "overhang_2_4_speed": [ "30", "30", "30", + "30", "30" ], "overhang_3_4_speed": [ "10", "10", "10", + "10", "10" ], "overhang_1_4_speed": [ "60", "60", "60", + "60", "60" ], "prime_tower_brim_width": "-1", @@ -68,6 +77,7 @@ "200", "200", "200", + "200", "200" ], "top_shell_layers": "6", @@ -75,9 +85,213 @@ "150", "150", "150", + "150", "150" ], "compatible_printers": [ "Bambu Lab H2C 0.4 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "travel_speed": [ + "500", + "500", + "500", + "500", + "500" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json index 0e6064052d..3790610f8b 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL H2S.json @@ -6,163 +6,212 @@ "setting_id": "GP238", "instantiation": "true", "description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.", - "default_acceleration": [ - "4000", - "4000" - ], - "initial_layer_speed": [ + "bridge_speed": [ + "50", "50", "50" ], - "inner_wall_speed": [ - "150", - "150" + "default_acceleration": [ + "4000", + "4000", + "4000" ], - "internal_solid_infill_speed": [ - "200", - "200" + "enable_height_slowdown": [ + "0", + "0", + "0" ], - "outer_wall_acceleration": [ - "2000", - "2000" - ], - "outer_wall_speed": [ - "60", - "60" - ], - "overhang_2_4_speed": [ - "30", - "30" - ], - "overhang_3_4_speed": [ - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "200", - "200" - ], - "top_surface_speed": [ - "150", - "150" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" + "enable_overhang_speed": [ + "1", + "1", + "1" ], "gap_infill_speed": [ + "250", "250", "250" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ + "105", "105", "105" ], - "bridge_speed": [ + "initial_layer_speed": [ + "50", "50", "50" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], "inner_wall_acceleration": [ + "0", "0", "0" ], - "overhang_1_4_speed": [ + "inner_wall_speed": [ + "150", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "200", + "200", + "200" + ], + "monotonic_travel_into_wall": "45.0", + "outer_wall_acceleration": [ + "2000", + "2000", + "2000" + ], + "outer_wall_speed": [ + "60", "60", "60" ], - "overhang_4_4_speed": [ + "overhang_1_4_speed": [ + "60", + "60", + "60" + ], + "overhang_2_4_speed": [ + "30", + "30", + "30" + ], + "overhang_3_4_speed": [ + "10", "10", "10" ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_pattern": "gyroid", + "sparse_infill_speed": [ + "200", + "200", + "200" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], + "top_surface_speed": [ + "150", + "150", + "150" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ + "500", "500", "500" ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], - "prime_tower_flat_ironing": "1", - "sparse_infill_pattern": "gyroid" + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json index d6170c2c44..2a76fcba00 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL P2S.json @@ -6,164 +6,211 @@ "setting_id": "GP211", "instantiation": "true", "description": "High quality profile for 0.2mm layer height, prioritizing strength and print quality.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "50", "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "4000", "4000", "4000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "250", "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50" + ], "inner_wall_speed": [ + "150", "150", "150" ], "internal_solid_infill_speed": [ + "200", "200", "200" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], + "outer_wall_speed": [ + "60", + "60", + "60" + ], "outer_wall_acceleration": [ + "2000", "2000", "2000" ], - "outer_wall_speed": [ + "overhang_1_4_speed": [ + "60", "60", "60" ], "overhang_2_4_speed": [ + "30", "30", "30" ], "overhang_3_4_speed": [ "10", - "10" - ], - "overhang_1_4_speed": [ - "60", - "60" - ], - "overhang_4_4_speed": [ "10", "10" ], - "prime_tower_brim_width": "-1", + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", + "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ + "200", "200", "200" ], - "sparse_infill_pattern": "gyroid", + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ + "150", "150", "150" ], - "top_surface_pattern": "monotonic", + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ - "600", - "600" + "1000", + "1000", + "1000" ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.20mm High Quality @BBL X2D.json b/resources/profiles/BBL/process/0.20mm High Quality @BBL X2D.json index 7c2cb2180f..9ae8ec20fc 100644 --- a/resources/profiles/BBL/process/0.20mm High Quality @BBL X2D.json +++ b/resources/profiles/BBL/process/0.20mm High Quality @BBL X2D.json @@ -9,6 +9,8 @@ "default_acceleration": [ "4000", "4000", + "4000", + "1000", "1000", "1000" ], @@ -17,9 +19,13 @@ "50", "250", "250", + "250", + "250", "250" ], "initial_layer_speed": [ + "50", + "50", "50", "50", "50", @@ -28,24 +34,32 @@ "inner_wall_speed": [ "150", "150", + "150", + "100", "100", "100" ], "internal_solid_infill_speed": [ "200", "200", + "200", + "100", "100", "100" ], "outer_wall_acceleration": [ "2000", "2000", + "2000", + "1000", "1000", "1000" ], "outer_wall_speed": [ "60", "60", + "60", + "50", "50", "50" ], @@ -53,18 +67,24 @@ "60", "0", "0", + "0", + "0", "0" ], "overhang_2_4_speed": [ + "30", "30", "30", "50", + "30", "30" ], "overhang_3_4_speed": [ + "10", "10", "10", "30", + "10", "10" ], "prime_tower_brim_width": "-1", @@ -72,23 +92,39 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_pattern": "gyroid", "sparse_infill_speed": [ "200", "200", + "200", + "100", "100", "100" ], "top_surface_speed": [ "150", "150", + "150", + "100", "100", "100" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -96,5 +132,205 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.4 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" ] } diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL A1.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A1.json index 03578962a4..b001cf6858 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL A1.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.20mm Standard @BBL A1", - "inherits": "fdm_process_single_0.20", - "from": "system", - "setting_id": "GP079", - "instantiation": "true", - "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.20mm Standard @BBL A1", + "inherits": "fdm_process_single_0.20", + "from": "system", + "setting_id": "GP079", + "instantiation": "true", + "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json index 737bfb8555..f30fb28c18 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A1M.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.20mm Standard @BBL A1M", - "inherits": "fdm_process_single_0.20", - "from": "system", - "setting_id": "GP000", - "instantiation": "true", - "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.20mm Standard @BBL A1M", + "inherits": "fdm_process_single_0.20", + "from": "system", + "setting_id": "GP000", + "instantiation": "true", + "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json index 9eee3748dc..1355dbe5c9 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL A2L.json @@ -9,7 +9,6 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" @@ -27,9 +26,6 @@ "slowdown_start_acc": [ "8000" ], - "slowdown_start_height": [ - "0" - ], "slowdown_start_speed": [ "500" ], diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2C.json index b50064fe34..560a3a6833 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2C.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2C.json @@ -10,12 +10,14 @@ "8000", "8000", "8000", + "8000", "8000" ], "enable_tower_interface_features": "1", "gap_infill_speed": [ "250", "150", + "150", "250", "150" ], @@ -23,17 +25,20 @@ "50", "50", "50", + "50", "50" ], "internal_solid_infill_speed": [ "250", "600", + "600", "250", "600" ], "inner_wall_speed": [ "300", "600", + "600", "300", "600" ], @@ -41,6 +46,7 @@ "outer_wall_speed": [ "200", "500", + "500", "200", "500" ], @@ -49,6 +55,7 @@ "sparse_infill_speed": [ "350", "600", + "600", "350", "600" ], @@ -56,9 +63,234 @@ "1000", "1000", "1000", + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2C 0.4 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json index 967cec907a..1b3426e1a7 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2D.json @@ -6,86 +6,95 @@ "setting_id": "GP124", "instantiation": "true", "description": "Standard profile for 0.4mm nozzle, prioritizing speed.", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "8000", "8000", "8000", "8000", + "8000", + "8000", "8000" ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "250", - "600", - "600" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500", - "500" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], "enable_overhang_speed": [ "1", "1", "1", "1", + "1", + "1", "1" ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", "gap_infill_speed": [ "250", "250", "250", "250", + "250", + "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "600", + "600", + "300", + "600", + "600", + "600" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "600", + "250", + "600", + "600", + "600" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500", "500", "500", + "500", + "500", "500" ], "initial_layer_infill_speed": [ @@ -93,27 +102,35 @@ "105", "105", "105", + "105", + "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], + "outer_wall_speed": [ + "200", + "500", + "500", + "200", + "500", + "500", + "500" + ], "outer_wall_acceleration": [ "5000", "5000", "5000", "5000", + "5000", + "5000", "5000" ], "overhang_1_4_speed": [ @@ -121,6 +138,8 @@ "0", "0", "0", + "0", + "0", "0" ], "overhang_2_4_speed": [ @@ -128,6 +147,8 @@ "50", "50", "50", + "50", + "50", "50" ], "overhang_3_4_speed": [ @@ -135,6 +156,8 @@ "30", "30", "30", + "30", + "30", "30" ], "overhang_4_4_speed": [ @@ -142,11 +165,17 @@ "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -154,36 +183,28 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_speed": [ + "350", + "600", + "600", + "350", + "600", + "600", + "600" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -191,20 +212,98 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" ], "top_surface_speed": [ "200", "200", "200", "200", + "200", + "200", "200" ], "travel_acceleration": [ @@ -212,13 +311,65 @@ "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1.09", + "1.09" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2DP.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2DP.json index da67bb2b18..839ce5ea5a 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2DP.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2DP.json @@ -6,53 +6,6 @@ "setting_id": "GP130", "instantiation": "true", "description": "Standard profile for 0.4mm nozzle, prioritizing speed.", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], "bridge_speed": [ "50", "50", @@ -60,6 +13,13 @@ "50", "50" ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000", + "8000" + ], "enable_overhang_speed": [ "1", "1", @@ -67,6 +27,13 @@ "1", "1" ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "250", "250", @@ -74,6 +41,34 @@ "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300", + "300" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500", @@ -88,13 +83,6 @@ "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", @@ -102,12 +90,12 @@ "0", "0" ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300", - "300" + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200" ], "outer_wall_acceleration": [ "5000", @@ -144,6 +132,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -158,6 +148,69 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_speed": [ + "350", + "600", + "350", + "600", + "600" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -179,27 +232,6 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], "top_surface_speed": [ "200", "200", @@ -214,11 +246,49 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1.09" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json index d807f16450..9e04bbd7cc 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL H2S.json @@ -7,159 +7,209 @@ "instantiation": "true", "description": "It has a general layer height, and results in general layer lines and printing quality. It is suitable for most general printing cases.", "bridge_speed": [ + "50", "50", "50" ], "default_acceleration": [ + "10000", "10000", "10000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ "250", + "150", "150" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ + "50", "50", "50" ], "inner_wall_speed": [ "300", + "600", "600" ], "internal_solid_infill_speed": [ "250", + "600", "600" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], + "ironing_flow": "15%", "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "outer_wall_speed": [ "200", + "500", "500" ], "outer_wall_acceleration": [ + "5000", "5000", "5000" ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], "overhang_3_4_speed": [ + "30", "30", "30" ], "overhang_4_4_speed": [ + "10", "10", "10" ], - "prime_tower_flat_ironing": "1", "prime_tower_width": "60", + "prime_tower_flat_ironing": "1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], "sparse_infill_speed": [ "350", + "600", "600" ], - "small_perimeter_speed": [ - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%" - ], - "support_speed": [ - "150", - "150" - ], "support_interface_speed": [ + "80", "80", "80" ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%" + ], + "top_surface_speed": [ + "200", + "200", + "200" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], "travel_speed": [ + "1000", "1000", "1000" ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], - "top_surface_speed": [ - "200", - "200" - ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab H2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json index 2d96c4fc4d..2292213fe1 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P1P.json @@ -26,37 +26,37 @@ "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" ], "inner_wall_speed": [ "300", - "300" + "400" ], "internal_solid_infill_speed": [ "250", - "250" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" + "350" ], "initial_layer_travel_acceleration": [ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], "outer_wall_speed": [ "200", - "200" + "350" ], "outer_wall_acceleration": [ "5000", @@ -88,7 +88,15 @@ ], "sparse_infill_speed": [ "270", - "270" + "370" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" ], "slowdown_start_height": [ "0", @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", - "200" + "300" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json index b1696e1fa5..13c9f1e722 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL P2S.json @@ -6,161 +6,208 @@ "setting_id": "GP155", "instantiation": "true", "description": "Standard profile for 0.4mm nozzle, prioritizing speed.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "50", "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "10000", "10000", "10000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "250", "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ + "50", "50", "50" ], "inner_wall_speed": [ "300", + "600", "600" ], "internal_solid_infill_speed": [ "250", + "600", "600" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ "6000", - "6000" - ], - "outer_wall_acceleration": [ "6000", "6000" ], - "outer_wall_speed": [ - "200", + "initial_layer_acceleration": [ + "500", + "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], + "outer_wall_speed": [ + "200", + "500", + "500" + ], + "outer_wall_acceleration": [ + "6000", + "6000", + "6000" + ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], "overhang_3_4_speed": [ + "30", "30", "30" ], "overhang_4_4_speed": [ + "10", "10", "10" ], "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ "270", + "600", "600" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ + "200", "200", "200" ], - "travel_speed_z": [ - "0", - "0" + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" ], "travel_acceleration": [ + "10000", "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0", + "0" + ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json index c5528cf17a..76557dd18d 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X1C.json @@ -27,37 +27,37 @@ "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" ], "inner_wall_speed": [ "300", - "300" + "400" ], "internal_solid_infill_speed": [ "250", - "250" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" + "350" ], "initial_layer_travel_acceleration": [ "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], "outer_wall_speed": [ "200", - "200" + "350" ], "outer_wall_acceleration": [ "5000", @@ -89,7 +89,15 @@ ], "sparse_infill_speed": [ "270", - "270" + "370" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" ], "slowdown_start_height": [ "0", @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", - "200" + "300" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.20mm Standard @BBL X2D.json b/resources/profiles/BBL/process/0.20mm Standard @BBL X2D.json index 797add313c..925ca46bfb 100644 --- a/resources/profiles/BBL/process/0.20mm Standard @BBL X2D.json +++ b/resources/profiles/BBL/process/0.20mm Standard @BBL X2D.json @@ -10,11 +10,15 @@ "50", "50", "50", + "50", + "200", "200" ], "default_acceleration": [ "10000", "10000", + "10000", + "1000", "1000", "1000" ], @@ -22,10 +26,14 @@ "1", "1", "1", + "1", + "0", "0" ], "enable_tower_interface_features": "1", "initial_layer_speed": [ + "50", + "50", "50", "50", "50", @@ -34,53 +42,79 @@ "inner_wall_speed": [ "300", "600", + "600", + "200", "200", "200" ], "internal_solid_infill_speed": [ "250", "600", + "600", + "200", "200", "200" ], "outer_wall_acceleration": [ "5000", "5000", + "5000", + "1000", "1000", "1000" ], "outer_wall_speed": [ "200", "500", + "500", + "50", "50", "50" ], "overhang_3_4_speed": [ "30", "20", + "20", "30", + "20", "20" ], "prime_tower_brim_width": "-1", "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_speed": [ "270", "600", + "600", + "200", "200", "200" ], "top_surface_acceleration": [ "2000", "2000", + "2000", + "1000", "1000", "1000" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -88,5 +122,213 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.4 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200", + "200" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" ] } diff --git a/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json b/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json index cee984c300..10776c396d 100644 --- a/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json +++ b/resources/profiles/BBL/process/0.20mm Steady @BBL A2L.json @@ -14,7 +14,6 @@ "3500", "6000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1", @@ -87,7 +86,7 @@ ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive TPU285" + "Direct Drive High Flow" ], "slowdown_end_acc": [ "2000", diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL A1.json b/resources/profiles/BBL/process/0.20mm Strength @BBL A1.json index e925a545c0..4be40d2ded 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL A1.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL A1.json @@ -1,26 +1,26 @@ { - "type": "process", - "name": "0.20mm Strength @BBL A1", - "inherits": "fdm_process_single_0.20", - "from": "system", - "setting_id": "GP080", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "outer_wall_speed": [ - "60" - ], - "sparse_infill_density": "25%", - "skeleton_infill_density": "25%", - "skin_infill_density": "25%", - "travel_speed": [ - "700" - ], - "wall_loops": "6", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.20mm Strength @BBL A1", + "inherits": "fdm_process_single_0.20", + "from": "system", + "setting_id": "GP080", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "outer_wall_speed": [ + "60" + ], + "sparse_infill_density": "25%", + "skeleton_infill_density": "25%", + "skin_infill_density": "25%", + "travel_speed": [ + "700" + ], + "wall_loops": "6", + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json index 4451e8f9c5..5e9a5e1eff 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL A1M.json @@ -1,26 +1,26 @@ { - "type": "process", - "name": "0.20mm Strength @BBL A1M", - "inherits": "fdm_process_single_0.20", - "from": "system", - "setting_id": "GP046", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0", - "outer_wall_speed": [ - "60" - ], - "sparse_infill_density": "25%", - "skeleton_infill_density": "25%", - "skin_infill_density": "25%", - "travel_speed": [ - "700" - ], - "wall_loops": "6", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.20mm Strength @BBL A1M", + "inherits": "fdm_process_single_0.20", + "from": "system", + "setting_id": "GP046", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0", + "outer_wall_speed": [ + "60" + ], + "sparse_infill_density": "25%", + "skeleton_infill_density": "25%", + "skin_infill_density": "25%", + "travel_speed": [ + "700" + ], + "wall_loops": "6", + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json index 932890cad3..5e6612b34f 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL P1P.json @@ -26,10 +26,6 @@ "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,18 +38,22 @@ "250", "250" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "60", "60" @@ -93,6 +93,14 @@ "270", "270" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -129,34 +137,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json index 3cb1ff5984..e9d90bf509 100644 --- a/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json +++ b/resources/profiles/BBL/process/0.20mm Strength @BBL X1C.json @@ -26,10 +26,6 @@ "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,18 +38,22 @@ "250", "250" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "60", "60" @@ -93,6 +93,14 @@ "270", "270" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -129,34 +137,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json index fe0d6589ac..ec11105a26 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.6 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json index d776a52d25..656ab5fe10 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL A2L 0.8 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2C 0.6 nozzle.json new file mode 100644 index 0000000000..4498589015 --- /dev/null +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2C 0.6 nozzle.json @@ -0,0 +1,295 @@ +{ + "type": "process", + "name": "0.24mm Balanced Quality @BBL H2C 0.6 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP163", + "instantiation": "true", + "description": "Strength profile for 0.6mm nozzle, prioritizing strength.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250", + "250" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "350", + "350", + "350", + "350" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" + ] +} diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2C 0.8 nozzle.json index 0a32a82a86..e9bfa96c5e 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2C 0.8 nozzle.json @@ -1,81 +1,81 @@ { - "type": "process", - "name": "0.24mm Balanced Quality @BBL H2C 0.8 nozzle", - "inherits": "fdm_process_dual_0.24_nozzle_0.8", - "from": "system", - "setting_id": "GP253", - "instantiation": "true", - "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "enable_tower_interface_features": "1", - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "350", - "350", - "350" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ] -} + "type": "process", + "name": "0.24mm Balanced Quality @BBL H2C 0.8 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP253", + "instantiation": "true", + "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "350", + "350", + "350" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2D 0.8 nozzle.json index c904c653f6..a70f768b16 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2D 0.8 nozzle.json @@ -1,92 +1,93 @@ { - "type": "process", - "name": "0.24mm Balanced Quality @BBL H2D 0.8 nozzle", - "inherits": "fdm_process_dual_0.24_nozzle_0.8", - "from": "system", - "setting_id": "GP138", - "instantiation": "true", - "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "process", + "name": "0.24mm Balanced Quality @BBL H2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP138", + "instantiation": "true", + "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2DP 0.8 nozzle.json index 9ca80b6acc..c8800dd913 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2DP 0.8 nozzle.json @@ -1,92 +1,92 @@ { - "type": "process", - "name": "0.24mm Balanced Quality @BBL H2DP 0.8 nozzle", - "inherits": "fdm_process_dual_0.24_nozzle_0.8", - "from": "system", - "setting_id": "GP141", - "instantiation": "true", - "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ] -} + "type": "process", + "name": "0.24mm Balanced Quality @BBL H2DP 0.8 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP141", + "instantiation": "true", + "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json index 373149f7ee..022974ff89 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.6 nozzle.json @@ -7,162 +7,211 @@ "instantiation": "true", "description": "Strength profile for 0.6mm nozzle, prioritizing strength.", "bridge_speed": [ + "30", "30", "30" ], "default_acceleration": [ + "10000", "10000", "10000" ], + "elefant_foot_compensation": "0.15", + "enable_height_slowdown": [ + "0", + "0", + "0" + ], + "enable_overhang_speed": [ + "1", + "1", + "1" + ], "gap_infill_speed": [ + "50", "50", "50" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_infill_speed": [ + "105", "105", "105" ], "initial_layer_speed": [ + "50", "50", "50" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "inner_wall_speed": [ + "300", "300", "300" ], "internal_solid_infill_speed": [ + "250", "250", "250" ], - "outer_wall_speed": [ - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "350" - ], - "top_surface_speed": [ - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.6 nozzle" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], + "monotonic_travel_into_wall": "45.0", "outer_wall_acceleration": [ + "5000", "5000", "5000" ], + "outer_wall_speed": [ + "200", + "200", + "200" + ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30" + ], "overhang_4_4_speed": [ + "10", "10", "10" ], + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_speed": [ + "350", + "350", + "350" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], + "top_surface_speed": [ + "200", + "200", + "200" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "compatible_printers": [ + "Bambu Lab H2S 0.6 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json index f9b4a1ab8d..9ef8388102 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL H2S 0.8 nozzle.json @@ -14,14 +14,19 @@ "10000", "10000" ], + "elefant_foot_compensation": "0.15", + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], "gap_infill_speed": [ "50", "50" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -34,10 +39,38 @@ "250", "250" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], "overhang_3_4_speed": [ "30", "30" @@ -46,39 +79,28 @@ "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], "sparse_infill_speed": [ "350", "350" ], - "top_surface_speed": [ - "200", - "200" + "support_interface_speed": [ + "80", + "80" ], - "travel_speed": [ - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" + "support_speed": [ + "150", + "150" ], "slowdown_start_height": [ "0", @@ -104,34 +126,6 @@ "100000", "100000" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], - "overhang_1_4_speed": [ - "0", - "0" - ], - "overhang_2_4_speed": [ - "50", - "50" - ], - "print_extruder_id": [ - "1", - "1" - ], - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "small_perimeter_speed": [ "50%", "50%" @@ -144,13 +138,25 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80" + "top_surface_speed": [ + "200", + "200" ], - "support_speed": [ - "150", - "150" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" ], "top_surface_acceleration": [ "2000", @@ -164,5 +170,8 @@ "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "monotonic_travel_into_wall": "45.0", + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json index 6ec3215684..24f35fc875 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.6 nozzle.json @@ -6,163 +6,210 @@ "setting_id": "GP213", "instantiation": "true", "description": "Strength profile for 0.6mm nozzle, prioritizing strength.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "30", "30", "30" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "10000", "10000", "10000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "50", "50", "50" ], + "initial_layer_speed": [ + "35", + "35", + "35" + ], "inner_wall_speed": [ + "300", "300", "300" ], "internal_solid_infill_speed": [ + "250", "250", "250" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "35" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "outer_wall_speed": [ + "200", "200", "200" ], - "overhang_3_4_speed": [ - "15", - "15" - ], "outer_wall_acceleration": [ + "5000", "5000", "5000" ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15", + "15" + ], "overhang_4_4_speed": [ + "10", "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ + "270", "270", "270" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], "top_surface_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.6 nozzle" ] diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json index 1a925b86c3..64c46e6414 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL P2S 0.8 nozzle.json @@ -6,12 +6,10 @@ "setting_id": "GP212", "instantiation": "true", "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ "30", "30" ], - "enable_arc_fitting": "0", "default_acceleration": [ "10000", "10000" @@ -28,6 +26,10 @@ "50", "50" ], + "initial_layer_speed": [ + "35", + "35" + ], "inner_wall_speed": [ "300", "300" @@ -36,38 +38,26 @@ "250", "250" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "35" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "55", + "55" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], - "overhang_3_4_speed": [ - "15", - "15" - ], - "overhang_4_4_speed": [ - "10", - "10" - ], "outer_wall_acceleration": [ "5000", "5000" @@ -80,8 +70,16 @@ "50", "50" ], - "prime_tower_brim_width": "-1", + "overhang_3_4_speed": [ + "15", + "15" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1" @@ -90,10 +88,19 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ "270", "270" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -130,22 +137,27 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "travel_speed": [ - "600", - "600" - ], + "top_surface_pattern": "monotonicline", "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -154,14 +166,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.8 nozzle" ] diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json index 28b6e84f97..f14acdfadb 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.6 nozzle.json @@ -9,12 +9,16 @@ "bridge_speed": [ "30", "50", + "50", + "30", "30", "30" ], "default_acceleration": [ "10000", "8000", + "8000", + "4000", "4000", "4000" ], @@ -22,42 +26,56 @@ "gap_infill_speed": [ "50", "250", + "250", + "50", "50", "50" ], "initial_layer_infill_speed": [ "55", "105", + "105", + "55", "55", "55" ], "initial_layer_speed": [ "35", "50", + "50", + "20", "20", "20" ], "inner_wall_speed": [ "300", "300", + "300", + "150", "150", "150" ], "internal_solid_infill_speed": [ "250", "300", + "300", + "150", "150", "150" ], "outer_wall_speed": [ "200", "200", + "200", + "50", "50", "50" ], "overhang_3_4_speed": [ "15", "30", + "30", + "15", "15", "15" ], @@ -66,22 +84,38 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_speed": [ "270", "600", + "600", + "100", "100", "100" ], "top_surface_speed": [ "150", "200", + "200", + "150", "150", "150" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -89,5 +123,213 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.6 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" ] } diff --git a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.8 nozzle.json index 8656248052..da2a8b86c3 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Quality @BBL X2D 0.8 nozzle.json @@ -1,100 +1,100 @@ { - "type": "process", - "name": "0.24mm Balanced Quality @BBL X2D 0.8 nozzle", - "inherits": "fdm_process_dual_0.24_nozzle_0.8", - "from": "system", - "setting_id": "GP226", - "instantiation": "true", - "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", - "bridge_speed": [ - "30", - "50", - "30", - "30" - ], - "default_acceleration": [ - "10000", - "8000", - "4000", - "4000" - ], - "enable_tower_interface_features": "1", - "gap_infill_speed": [ - "50", - "250", - "50", - "50" - ], - "initial_layer_infill_speed": [ - "55", - "105", - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "50", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "150", - "150" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "150", - "150" - ], - "outer_wall_speed": [ - "200", - "200", - "50", - "50" - ], - "overhang_3_4_speed": [ - "15", - "30", - "25", - "25" - ], - "overhang_4_4_speed": [ - "10", - "10", - "5", - "5" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "sparse_infill_speed": [ - "270", - "600", - "100", - "100" - ], - "top_surface_pattern": "monotonicline", - "top_surface_speed": [ - "150", - "200", - "150", - "150" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ] -} + "type": "process", + "name": "0.24mm Balanced Quality @BBL X2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP226", + "instantiation": "true", + "description": "High quality profile for 0.8mm nozzle, prioritizing print quality.", + "bridge_speed": [ + "30", + "50", + "30", + "30" + ], + "default_acceleration": [ + "10000", + "8000", + "4000", + "4000" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "50", + "250", + "50", + "50" + ], + "initial_layer_infill_speed": [ + "55", + "105", + "55", + "55" + ], + "initial_layer_speed": [ + "35", + "50", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "150", + "150" + ], + "outer_wall_speed": [ + "200", + "200", + "50", + "50" + ], + "overhang_3_4_speed": [ + "15", + "30", + "25", + "25" + ], + "overhang_4_4_speed": [ + "10", + "10", + "5", + "5" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "sparse_infill_speed": [ + "270", + "600", + "100", + "100" + ], + "top_surface_pattern": "monotonicline", + "top_surface_speed": [ + "150", + "200", + "150", + "150" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2C 0.6 nozzle.json index e66b7ee039..2514a1e537 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2C 0.6 nozzle.json @@ -1,87 +1,87 @@ { - "type": "process", - "name": "0.24mm Balanced Strength @BBL H2C 0.6 nozzle", - "inherits": "fdm_process_dual_0.24_nozzle_0.6", - "from": "system", - "setting_id": "GP254", - "instantiation": "true", - "description": "Strength profile for 0.6mm nozzle, prioritizing strength.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "enable_tower_interface_features": "1", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.6 nozzle" - ] -} + "type": "process", + "name": "0.24mm Balanced Strength @BBL H2C 0.6 nozzle", + "inherits": "fdm_process_dual_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP254", + "instantiation": "true", + "description": "Strength profile for 0.6mm nozzle, prioritizing strength.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2D 0.6 nozzle.json index 63063d0d3c..a6939904e4 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2D 0.6 nozzle.json @@ -11,6 +11,8 @@ "50", "50", "50", + "50", + "50", "50" ], "default_acceleration": [ @@ -18,27 +20,45 @@ "8000", "8000", "8000", + "8000", + "8000", "8000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", "gap_infill_speed": [ "250", "250", "250", "250", + "250", + "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105", - "105" - ], "initial_layer_speed": [ "50", "50", "50", "50", + "50", + "50", "50" ], "inner_wall_speed": [ @@ -46,88 +66,71 @@ "300", "300", "300", + "300", + "300", "300" ], "internal_solid_infill_speed": [ "250", "300", + "300", "250", "300", + "300", "300" ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], "initial_layer_travel_acceleration": [ "6000", "6000", "6000", "6000", + "6000", + "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], "outer_wall_acceleration": [ "5000", "5000", "5000", "5000", + "5000", + "5000", "5000" ], "overhang_1_4_speed": [ @@ -135,6 +138,8 @@ "0", "0", "0", + "0", + "0", "0" ], "overhang_2_4_speed": [ @@ -142,18 +147,35 @@ "50", "50", "50", + "50", + "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], "overhang_4_4_speed": [ "10", "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -161,36 +183,28 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_speed": [ + "350", + "600", + "600", + "350", + "600", + "600", + "600" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -198,27 +212,164 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2DP 0.6 nozzle.json index 0f138b0cc6..250df469d2 100644 --- a/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Balanced Strength @BBL H2DP 0.6 nozzle.json @@ -20,6 +20,20 @@ "8000", "8000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "250", "250", @@ -48,59 +62,12 @@ "300", "300" ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105", - "105" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" ], "initial_layer_acceleration": [ "500", @@ -109,12 +76,12 @@ "500", "500" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" ], "inner_wall_acceleration": [ "0", @@ -123,6 +90,13 @@ "0", "0" ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200" + ], "outer_wall_acceleration": [ "5000", "5000", @@ -144,6 +118,13 @@ "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30" + ], "overhang_4_4_speed": [ "10", "10", @@ -151,6 +132,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -165,6 +148,69 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_speed": [ + "350", + "600", + "350", + "600", + "600" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -186,26 +232,19 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200" ], - "support_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" ], "travel_acceleration": [ "10000", @@ -214,11 +253,42 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL A1.json b/resources/profiles/BBL/process/0.24mm Draft @BBL A1.json index 70c8df6513..637e5f031c 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL A1.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.24mm Draft @BBL A1", - "inherits": "fdm_process_single_0.24", - "from": "system", - "setting_id": "GP081", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.24mm Draft @BBL A1", + "inherits": "fdm_process_single_0.24", + "from": "system", + "setting_id": "GP081", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json index 510e60bd3a..f85bfbfd56 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL A1M.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.24mm Draft @BBL A1M", - "inherits": "fdm_process_single_0.24", - "from": "system", - "setting_id": "GP047", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.24mm Draft @BBL A1M", + "inherits": "fdm_process_single_0.24", + "from": "system", + "setting_id": "GP047", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but slightly shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json index f59e06d60b..9df641f1a7 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL P1P.json @@ -26,10 +26,6 @@ "230", "230" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,18 +38,22 @@ "230", "230" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" @@ -90,6 +90,14 @@ "230", "230" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json index 5a32b21d55..ab68c44ca7 100644 --- a/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.24mm Draft @BBL X1C.json @@ -26,10 +26,6 @@ "230", "230" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,18 +38,22 @@ "230", "230" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" @@ -90,6 +90,14 @@ "230", "230" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL A1 0.8 nozzle.json index 52b75c5f3a..044b7b95eb 100644 --- a/resources/profiles/BBL/process/0.24mm Fine @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Fine @BBL A1 0.8 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.24mm Fine @BBL A1 0.8 nozzle", - "inherits": "fdm_process_single_0.24_nozzle_0.8", - "from": "system", - "setting_id": "GP092", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "process", + "name": "0.24mm Fine @BBL A1 0.8 nozzle", + "inherits": "fdm_process_single_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP092", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json index 617a01b57b..8581ea849e 100644 --- a/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Fine @BBL A1M 0.8 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.24mm Fine @BBL A1M 0.8 nozzle", - "inherits": "fdm_process_single_0.24_nozzle_0.8", - "from": "system", - "setting_id": "GP057", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "process", + "name": "0.24mm Fine @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_single_0.24_nozzle_0.8", + "from": "system", + "setting_id": "GP057", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a smaller layer height, and results in less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json index dc80b360fa..468c46d138 100644 --- a/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Fine @BBL P1P 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.24mm Optimal @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1 0.6 nozzle.json index 41aad2f0a4..aa437c7811 100644 --- a/resources/profiles/BBL/process/0.24mm Optimal @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1 0.6 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.24mm Optimal @BBL A1 0.6 nozzle", - "inherits": "fdm_process_single_0.24_nozzle_0.6", - "from": "system", - "setting_id": "GP089", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "process", + "name": "0.24mm Optimal @BBL A1 0.6 nozzle", + "inherits": "fdm_process_single_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP089", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json index b0c88937e6..c5503c4eab 100644 --- a/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Optimal @BBL A1M 0.6 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.24mm Optimal @BBL A1M 0.6 nozzle", - "inherits": "fdm_process_single_0.24_nozzle_0.6", - "from": "system", - "setting_id": "GP054", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle" - ] -} + "type": "process", + "name": "0.24mm Optimal @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_single_0.24_nozzle_0.6", + "from": "system", + "setting_id": "GP054", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a smaller layer height, and results in less apparent layer lines and slight higher printing quality, but longer printing time.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json index a8eb1b516b..9b22c38074 100644 --- a/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Optimal @BBL P1P 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json b/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json index 920c0743fd..045d75a74f 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL A2L.json @@ -9,7 +9,6 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" @@ -27,9 +26,6 @@ "slowdown_start_acc": [ "8000" ], - "slowdown_start_height": [ - "0" - ], "slowdown_start_speed": [ "500" ], diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL H2C.json b/resources/profiles/BBL/process/0.24mm Standard @BBL H2C.json index 3f58cdbc04..b87fa9df45 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL H2C.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL H2C.json @@ -9,6 +9,7 @@ "8000", "8000", "8000", + "8000", "8000" ], "enable_tower_interface_features": "1", @@ -16,11 +17,13 @@ "50", "50", "50", + "50", "50" ], "internal_solid_infill_speed": [ "250", "300", + "300", "250", "300" ], @@ -28,6 +31,7 @@ "200", "200", "200", + "200", "200" ], "prime_tower_brim_width": "-1", @@ -35,6 +39,7 @@ "sparse_infill_speed": [ "350", "600", + "600", "350", "600" ], @@ -42,9 +47,248 @@ "1000", "1000", "1000", + "1000", "1000" ], "compatible_printers": [ "Bambu Lab H2C 0.4 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL H2D.json b/resources/profiles/BBL/process/0.24mm Standard @BBL H2D.json index b01b963193..d0645ccde5 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL H2D.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL H2D.json @@ -5,79 +5,95 @@ "from": "system", "setting_id": "GP144", "instantiation": "true", + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], "default_acceleration": [ "8000", "8000", "8000", "8000", + "8000", + "8000", "8000" ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.4 nozzle" - ], - "bridge_speed": [ - "50", - "50", - "50", - "50", - "50" - ], "enable_overhang_speed": [ "1", "1", "1", "1", + "1", + "1", "1" ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", "gap_infill_speed": [ "250", "250", "250", "250", + "250", + "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "300", + "250", + "300", + "300", + "300" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500", "500", "500", + "500", + "500", "500" ], "initial_layer_infill_speed": [ @@ -85,34 +101,35 @@ "105", "105", "105", + "105", + "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300", - "300" + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" ], "outer_wall_acceleration": [ "5000", "5000", "5000", "5000", + "5000", + "5000", "5000" ], "overhang_1_4_speed": [ @@ -120,6 +137,8 @@ "0", "0", "0", + "0", + "0", "0" ], "overhang_2_4_speed": [ @@ -127,6 +146,8 @@ "50", "50", "50", + "50", + "50", "50" ], "overhang_3_4_speed": [ @@ -134,6 +155,8 @@ "30", "30", "30", + "30", + "30", "30" ], "overhang_4_4_speed": [ @@ -141,11 +164,17 @@ "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -153,36 +182,28 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_speed": [ + "350", + "600", + "600", + "350", + "600", + "600", + "600" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -190,20 +211,98 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" ], "top_surface_speed": [ "200", "200", "200", "200", + "200", + "200", "200" ], "travel_acceleration": [ @@ -211,13 +310,65 @@ "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL H2DP.json b/resources/profiles/BBL/process/0.24mm Standard @BBL H2DP.json index fb06e53278..190c95ab87 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL H2DP.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL H2DP.json @@ -5,53 +5,6 @@ "from": "system", "setting_id": "GP132", "instantiation": "true", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000", - "8000" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50", - "50" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.4 nozzle" - ], "bridge_speed": [ "50", "50", @@ -59,6 +12,13 @@ "50", "50" ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000", + "8000" + ], "enable_overhang_speed": [ "1", "1", @@ -66,6 +26,13 @@ "1", "1" ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "250", "250", @@ -73,6 +40,34 @@ "250", "250" ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300", + "300" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500", @@ -87,13 +82,6 @@ "105", "105" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" - ], "inner_wall_acceleration": [ "0", "0", @@ -101,12 +89,12 @@ "0", "0" ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300", - "300" + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200" ], "outer_wall_acceleration": [ "5000", @@ -143,6 +131,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -157,6 +147,69 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_speed": [ + "350", + "600", + "350", + "600", + "600" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -178,27 +231,6 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" - ], "top_surface_speed": [ "200", "200", @@ -213,11 +245,49 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.4 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json b/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json index 11717ad604..c1907cf933 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL H2S.json @@ -5,162 +5,211 @@ "from": "system", "setting_id": "GP241", "instantiation": "true", - "default_acceleration": [ - "10000", - "10000" - ], - "initial_layer_speed": [ + "bridge_speed": [ + "50", "50", "50" ], - "internal_solid_infill_speed": [ - "250", - "300" + "default_acceleration": [ + "10000", + "10000", + "10000" ], - "outer_wall_speed": [ - "200", - "200" + "enable_height_slowdown": [ + "0", + "0", + "0" ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600" - ], - "travel_speed": [ - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.4 nozzle" + "enable_overhang_speed": [ + "1", + "1", + "1" ], "gap_infill_speed": [ + "250", "250", "250" ], - "inner_wall_speed": [ - "300", - "300" + "initial_layer_acceleration": [ + "500", + "500", + "500" ], "initial_layer_infill_speed": [ + "105", "105", "105" ], - "bridge_speed": [ + "initial_layer_speed": [ + "50", "50", "50" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" - ], - "slowdown_start_height": [ - "0", - "0" - ], - "slowdown_start_speed": [ - "1000", - "1000" - ], - "slowdown_start_acc": [ - "100000", - "100000" - ], - "slowdown_end_height": [ - "400", - "400" - ], - "slowdown_end_speed": [ - "1000", - "1000" - ], - "slowdown_end_acc": [ - "100000", - "100000" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], "inner_wall_acceleration": [ + "0", "0", "0" ], + "inner_wall_speed": [ + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "300" + ], + "monotonic_travel_into_wall": "45.0", "outer_wall_acceleration": [ + "5000", "5000", "5000" ], + "outer_wall_speed": [ + "200", + "200", + "200" + ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], "overhang_3_4_speed": [ + "30", "30", "30" ], "overhang_4_4_speed": [ + "10", "10", "10" ], + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "prime_tower_width": "60", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000" + ], + "slowdown_start_height": [ + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], + "sparse_infill_speed": [ + "350", + "600", + "600" + ], "support_interface_speed": [ + "80", "80", "80" ], "support_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "top_surface_speed": [ + "200", "200", "200" ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "travel_speed_z": [ + "0", "0", "0" ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "compatible_printers": [ + "Bambu Lab H2S 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json b/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json index b0655b0f55..bec3147a16 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL P2S.json @@ -5,163 +5,210 @@ "from": "system", "setting_id": "GP214", "instantiation": "true", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "50", "50", "50" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "10000", "10000", "10000" ], "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ "250", - "250" - ], - "internal_solid_infill_speed": [ "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ + "50", "50", "50" ], "inner_wall_speed": [ + "230", "230", "230" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" + "internal_solid_infill_speed": [ + "250", + "250", + "250" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "outer_wall_speed": [ + "200", "200", "200" ], "outer_wall_acceleration": [ + "5000", "5000", "5000" ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], "overhang_3_4_speed": [ + "30", "30", "30" ], "overhang_4_4_speed": [ + "10", "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ + "270", "270", "270" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ + "200", "200", "200" ], - "travel_speed_z": [ - "0", - "0" + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" ], "travel_acceleration": [ + "10000", "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000" + ], + "travel_speed_z": [ + "0", + "0", + "0" + ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.4 nozzle" ] diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json index 7b3f2d2293..6f3e2666a1 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json index 9f3bd73c59..5a7d89eea4 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X1C 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.24mm Standard @BBL X2D.json b/resources/profiles/BBL/process/0.24mm Standard @BBL X2D.json index fa06724591..80f9fb0384 100644 --- a/resources/profiles/BBL/process/0.24mm Standard @BBL X2D.json +++ b/resources/profiles/BBL/process/0.24mm Standard @BBL X2D.json @@ -8,11 +8,15 @@ "default_acceleration": [ "10000", "8000", + "8000", + "1000", "1000", "1000" ], "enable_tower_interface_features": "1", "initial_layer_speed": [ + "50", + "50", "50", "50", "50", @@ -21,12 +25,16 @@ "internal_solid_infill_speed": [ "250", "300", + "300", + "100", "100", "100" ], "outer_wall_speed": [ "200", "200", + "200", + "50", "50", "50" ], @@ -35,16 +43,30 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_speed": [ "270", "600", + "600", + "100", "100", "100" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -52,5 +74,261 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.4 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200", + "200" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300", + "300", + "300" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" ] } diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1.json index 48c3a62ef0..b21713ffde 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.28mm Extra Draft @BBL A1", - "inherits": "fdm_process_single_0.28", - "from": "system", - "setting_id": "GP082", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle" - ] -} + "type": "process", + "name": "0.28mm Extra Draft @BBL A1", + "inherits": "fdm_process_single_0.28", + "from": "system", + "setting_id": "GP082", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json index b6d2e920e5..a4d1cd337e 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL A1M.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.28mm Extra Draft @BBL A1M", - "inherits": "fdm_process_single_0.28", - "from": "system", - "setting_id": "GP048", - "instantiation": "true", - "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle" - ] -} + "type": "process", + "name": "0.28mm Extra Draft @BBL A1M", + "inherits": "fdm_process_single_0.28", + "from": "system", + "setting_id": "GP048", + "instantiation": "true", + "description": "Compared with the default profile of a 0.4 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.4 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json index 92fadb9054..ed36d640ec 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL P1P.json @@ -26,10 +26,6 @@ "200", "200" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,18 +38,22 @@ "200", "200" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" @@ -90,6 +90,14 @@ "200", "200" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json index 255d2a806a..c7fb145bfb 100644 --- a/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json +++ b/resources/profiles/BBL/process/0.28mm Extra Draft @BBL X1C.json @@ -26,10 +26,6 @@ "200", "200" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -42,18 +38,22 @@ "200", "200" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" @@ -90,6 +90,14 @@ "200", "200" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -126,34 +134,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_acceleration": [ - "2000", - "2000" - ], "top_surface_speed": [ "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A1 0.6 nozzle.json index 7ace7d3b69..99dfef5693 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A1 0.6 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.30mm Standard @BBL A1 0.6 nozzle", - "inherits": "fdm_process_single_0.30_nozzle_0.6", - "from": "system", - "setting_id": "GP096", - "instantiation": "true", - "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "process", + "name": "0.30mm Standard @BBL A1 0.6 nozzle", + "inherits": "fdm_process_single_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP096", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json index ab1491afdd..fa570e3115 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A1M 0.6 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.30mm Standard @BBL A1M 0.6 nozzle", - "inherits": "fdm_process_single_0.30_nozzle_0.6", - "from": "system", - "setting_id": "GP038", - "instantiation": "true", - "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle" - ] -} + "type": "process", + "name": "0.30mm Standard @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_single_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP038", + "instantiation": "true", + "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json index 800dad889c..63cc41d61f 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL A2L 0.6 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2C 0.6 nozzle.json index b86a58762a..ff61238230 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2C 0.6 nozzle.json @@ -10,6 +10,7 @@ "8000", "8000", "8000", + "8000", "8000" ], "enable_tower_interface_features": "1", @@ -17,29 +18,34 @@ "105", "105", "105", + "105", "105" ], "initial_layer_speed": [ "50", "50", "50", + "50", "50" ], "inner_wall_speed": [ "300", "600", + "600", "300", "600" ], "internal_solid_infill_speed": [ "250", "600", + "600", "250", "600" ], "outer_wall_speed": [ "200", "500", + "500", "200", "500" ], @@ -47,6 +53,7 @@ "30", "30", "30", + "30", "30" ], "prime_tower_brim_width": "-1", @@ -54,6 +61,7 @@ "sparse_infill_speed": [ "350", "600", + "600", "350", "600" ], @@ -61,16 +69,228 @@ "200", "200", "200", + "200", "200" ], "travel_speed": [ "1000", "1000", "1000", + "1000", "1000" ], "top_shell_layers": "4", "compatible_printers": [ "Bambu Lab H2C 0.6 nozzle" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "30", + "30", + "30", + "30", + "30" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0" + ], + "gap_infill_speed": [ + "50", + "50", + "50", + "50", + "50" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive E3D High Flow", + "Direct Drive Standard", + "Direct Drive High Flow" ] } diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json index ce7e10a14d..85fec57c8b 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2D 0.6 nozzle.json @@ -11,6 +11,8 @@ "50", "50", "50", + "50", + "50", "50" ], "default_acceleration": [ @@ -18,27 +20,45 @@ "8000", "8000", "8000", + "8000", + "8000", "8000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "enable_tower_interface_features": "1", "gap_infill_speed": [ "250", "250", "250", "250", + "250", + "250", "250" ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105", - "105" - ], "initial_layer_speed": [ "50", "50", "50", "50", + "50", + "50", "50" ], "inner_wall_speed": [ @@ -46,88 +66,71 @@ "300", "300", "300", + "300", + "300", "300" ], "internal_solid_infill_speed": [ "250", "300", + "300", "250", "300", + "300", "300" ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.6 nozzle" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" - ], - "initial_layer_acceleration": [ - "500", - "500", - "500", - "500", - "500" - ], "initial_layer_travel_acceleration": [ "6000", "6000", "6000", "6000", + "6000", + "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105", + "105" + ], "inner_wall_acceleration": [ "0", "0", "0", "0", + "0", + "0", "0" ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], "outer_wall_acceleration": [ "5000", "5000", "5000", "5000", + "5000", + "5000", "5000" ], "overhang_1_4_speed": [ @@ -135,6 +138,8 @@ "0", "0", "0", + "0", + "0", "0" ], "overhang_2_4_speed": [ @@ -142,18 +147,35 @@ "50", "50", "50", + "50", + "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], "overhang_4_4_speed": [ "10", "10", "10", "10", + "10", + "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", + "1", + "2", "2", "2", "2" @@ -161,36 +183,28 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Direct Drive Standard", "Direct Drive High Flow", - "Direct Drive TPU High Flow" + "Direct Drive TPU High Flow", + "Direct Drive E3D High Flow" ], - "small_perimeter_speed": [ - "50%", - "50%", - "50%", - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0", - "0", - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%", - "100%", - "100%", - "100%" + "sparse_infill_speed": [ + "350", + "600", + "600", + "350", + "600", + "600", + "600" ], "support_interface_speed": [ "80", "80", "80", "80", + "80", + "80", "80" ], "support_speed": [ @@ -198,27 +212,164 @@ "150", "150", "150", + "150", + "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200" ], "travel_acceleration": [ "10000", "10000", "10000", "10000", + "10000", + "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1.09", + "1.09" + ], "travel_speed_z": [ "0", "0", "0", "0", + "0", + "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.6 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2DP 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2DP 0.6 nozzle.json index c141b81adf..3ff700eb52 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2DP 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2DP 0.6 nozzle.json @@ -20,6 +20,20 @@ "8000", "8000" ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0" + ], "gap_infill_speed": [ "250", "250", @@ -48,59 +62,12 @@ "300", "300" ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105", - "105" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30", - "30" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.6 nozzle" - ], - "enable_overhang_speed": [ - "1", - "1", - "1", - "1", - "1" + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000" ], "initial_layer_acceleration": [ "500", @@ -109,12 +76,12 @@ "500", "500" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000", - "6000", - "6000", - "6000" + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105" ], "inner_wall_acceleration": [ "0", @@ -123,6 +90,13 @@ "0", "0" ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200", + "200" + ], "outer_wall_acceleration": [ "5000", "5000", @@ -144,6 +118,13 @@ "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30" + ], "overhang_4_4_speed": [ "10", "10", @@ -151,6 +132,8 @@ "10", "10" ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1", @@ -165,6 +148,69 @@ "Direct Drive High Flow", "Direct Drive TPU High Flow" ], + "sparse_infill_speed": [ + "350", + "600", + "350", + "600", + "600" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000" + ], "small_perimeter_speed": [ "50%", "50%", @@ -186,26 +232,12 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80", - "80" - ], - "support_speed": [ - "150", - "150", - "150", - "150", - "150" - ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000", - "2000" + "top_surface_speed": [ + "200", + "200", + "200", + "200", + "200" ], "travel_acceleration": [ "10000", @@ -214,11 +246,49 @@ "10000", "10000" ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1.09" + ], "travel_speed_z": [ "0", "0", "0", "0", "0" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.6 nozzle" ] } diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json index 1e4493c397..89319e5662 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL H2S 0.6 nozzle.json @@ -7,160 +7,210 @@ "instantiation": "true", "description": "It has a big layer height, and results in apparent layer lines and ordinary printing quality and printing time.", "bridge_speed": [ + "30", "30", "30" ], "default_acceleration": [ + "10000", "10000", "10000" ], "elefant_foot_compensation": "0.15", "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ "50", - "50" - ], - "initial_layer_infill_speed": [ - "105", - "105" - ], - "initial_layer_speed": [ "50", "50" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" + "initial_layer_speed": [ + "50", + "50", + "50" ], "inner_wall_speed": [ "300", + "600", "600" ], "internal_solid_infill_speed": [ "250", + "600", "600" ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], - "overhang_3_4_speed": [ - "30", - "30" + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], + "outer_wall_speed": [ + "200", + "500", + "500" ], "outer_wall_acceleration": [ + "5000", "5000", "5000" ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], + "overhang_3_4_speed": [ + "30", + "30", + "30" + ], "overhang_4_4_speed": [ + "10", "10", "10" ], - "outer_wall_speed": [ - "120", - "500" - ], - "prime_tower_flat_ironing": "1", "prime_tower_width": "60", + "prime_tower_flat_ironing": "1", "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], "sparse_infill_speed": [ "350", + "600", "600" ], - "small_perimeter_speed": [ - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%" + "support_interface_speed": [ + "80", + "80", + "80" ], "support_speed": [ + "150", "150", "150" ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], - "support_interface_speed": [ - "80", - "80" + "small_perimeter_speed": [ + "50%", + "50%", + "50%" ], - "travel_speed": [ - "1000", - "1000" + "small_perimeter_threshold": [ + "0", + "0", + "0" ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%" + ], + "top_shell_layers": "4", "top_surface_speed": [ + "200", "200", "200" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab H2S 0.6 nozzle" ] diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json index 66a2c3a007..91a3c1fcf7 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P1P 0.6 nozzle.json @@ -25,39 +25,39 @@ ], "gap_infill_speed": [ "50", - "50" - ], - "initial_layer_infill_speed": [ - "55", - "55" + "30" ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", - "150" + "180" ], "internal_solid_infill_speed": [ "150", - "150" + "250" ], "initial_layer_travel_acceleration": [ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "150" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -89,7 +89,15 @@ ], "sparse_infill_speed": [ "100", - "100" + "200" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" ], "slowdown_start_height": [ "0", @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", - "150" + "80" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json index b10573aa5e..d745625988 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL P2S 0.6 nozzle.json @@ -6,162 +6,209 @@ "setting_id": "GP160", "instantiation": "true", "description": "Standard profile for 0.6mm nozzle, prioritizing speed.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ + "30", "30", "30" ], - "enable_arc_fitting": "0", "default_acceleration": [ + "10000", "10000", "10000" ], "elefant_foot_compensation": "0.15", "enable_overhang_speed": [ + "1", "1", "1" ], "enable_height_slowdown": [ + "0", "0", "0" ], "gap_infill_speed": [ + "50", "50", "50" ], + "initial_layer_speed": [ + "35", + "35", + "35" + ], "inner_wall_speed": [ "300", + "600", "600" ], "internal_solid_infill_speed": [ "250", + "600", "600" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "35" - ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "initial_layer_travel_acceleration": [ + "6000", "6000", "6000" ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0" + ], "outer_wall_speed": [ "200", + "500", "500" ], - "overhang_3_4_speed": [ - "15", - "15" - ], "outer_wall_acceleration": [ + "5000", "5000", "5000" ], "overhang_1_4_speed": [ + "0", "0", "0" ], "overhang_2_4_speed": [ + "50", "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15", + "15" + ], "overhang_4_4_speed": [ + "10", "10", "10" ], "print_extruder_id": [ + "1", "1", "1" ], "print_extruder_variant": [ "Direct Drive Standard", - "Direct Drive High Flow" + "Direct Drive High Flow", + "Direct Drive E3D High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ "270", + "600", "600" ], + "support_interface_speed": [ + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150" + ], "slowdown_start_height": [ + "0", "0", "0" ], "slowdown_start_speed": [ + "1000", "1000", "1000" ], "slowdown_start_acc": [ + "100000", "100000", "100000" ], "slowdown_end_height": [ + "400", "400", "400" ], "slowdown_end_speed": [ + "1000", "1000", "1000" ], "slowdown_end_acc": [ + "100000", "100000", "100000" ], "small_perimeter_speed": [ + "50%", "50%", "50%" ], "small_perimeter_threshold": [ + "0", "0", "0" ], "sparse_infill_acceleration": [ + "100%", "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "top_surface_pattern": "monotonic", - "travel_speed": [ - "600", - "600" - ], "top_surface_speed": [ + "150", "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000", + "1000" + ], "top_surface_acceleration": [ + "2000", "2000", "2000" ], "travel_speed_z": [ + "0", "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ + "80%", "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.6 nozzle" ] diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json index f4f72db014..035a7fbbed 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json index 7b04010bf2..85508a9021 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X1C 0.6 nozzle.json @@ -25,39 +25,39 @@ ], "gap_infill_speed": [ "50", - "50" - ], - "initial_layer_infill_speed": [ - "55", - "55" + "30" ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", - "150" + "180" ], "internal_solid_infill_speed": [ "150", - "150" + "250" ], "initial_layer_travel_acceleration": [ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "150" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -89,7 +89,15 @@ ], "sparse_infill_speed": [ "100", - "100" + "200" + ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" ], "slowdown_start_height": [ "0", @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", - "150" + "80" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.30mm Standard @BBL X2D 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Standard @BBL X2D 0.6 nozzle.json index 4ef62cbbdc..b2bcc119e6 100644 --- a/resources/profiles/BBL/process/0.30mm Standard @BBL X2D 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Standard @BBL X2D 0.6 nozzle.json @@ -9,6 +9,8 @@ "default_acceleration": [ "10000", "10000", + "10000", + "4000", "4000", "4000" ], @@ -16,30 +18,40 @@ "initial_layer_speed": [ "35", "35", + "35", + "20", "20", "20" ], "inner_wall_speed": [ "300", "600", + "600", + "150", "150", "150" ], "internal_solid_infill_speed": [ "250", "600", + "600", + "150", "150", "150" ], "outer_wall_acceleration": [ "5000", "5000", + "5000", + "4000", "4000", "4000" ], "outer_wall_speed": [ "200", "500", + "500", + "50", "50", "50" ], @@ -47,16 +59,30 @@ "print_extruder_variant": [ "Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive E3D High Flow", "Bowden Standard", - "Bowden High Flow" + "Bowden High Flow", + "Bowden E3D High Flow" + ], + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2" ], "sparse_infill_speed": [ "270", "600", + "600", + "100", "100", "100" ], "travel_speed": [ + "1000", + "1000", "1000", "1000", "1000", @@ -64,5 +90,245 @@ ], "compatible_printers": [ "Bambu Lab X2D 0.6 nozzle" + ], + "vertical_shell_speed": [ + "80%", + "80%", + "80%", + "80%", + "80%", + "80%" + ], + "travel_speed_z": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "travel_acceleration": [ + "10000", + "10000", + "10000", + "10000", + "10000", + "10000" + ], + "top_surface_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000", + "2000", + "2000" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80" + ], + "sparse_infill_acceleration": [ + "100%", + "100%", + "100%", + "100%", + "100%", + "100%" + ], + "small_perimeter_threshold": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "small_perimeter_speed": [ + "50%", + "50%", + "50%", + "50%", + "50%", + "50%" + ], + "slowdown_start_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_start_height": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "slowdown_start_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "slowdown_end_speed": [ + "1000", + "1000", + "1000", + "1000", + "1000", + "1000" + ], + "slowdown_end_height": [ + "400", + "400", + "400", + "400", + "400", + "400" + ], + "slowdown_end_acc": [ + "100000", + "100000", + "100000", + "100000", + "100000", + "100000" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15", + "15", + "15" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "inner_wall_acceleration": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "initial_layer_travel_acceleration": [ + "6000", + "6000", + "6000", + "6000", + "6000", + "6000" + ], + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55", + "55", + "55" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500" + ], + "gap_infill_speed": [ + "50", + "50", + "50", + "50", + "50", + "50" + ], + "enable_overhang_speed": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0", + "0", + "0", + "0", + "0" + ], + "bridge_speed": [ + "30", + "30", + "30", + "30", + "30", + "30" ] } diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL A1 0.6 nozzle.json index cccc2ff9f9..0c3818df5f 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL A1 0.6 nozzle.json @@ -1,23 +1,23 @@ { - "type": "process", - "name": "0.30mm Strength @BBL A1 0.6 nozzle", - "inherits": "fdm_process_single_0.30_nozzle_0.6", - "from": "system", - "setting_id": "GP097", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "sparse_infill_density": "25%", - "skeleton_infill_density": "25%", - "skin_infill_density": "25%", - "travel_speed": [ - "700" - ], - "wall_loops": "4", - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "process", + "name": "0.30mm Strength @BBL A1 0.6 nozzle", + "inherits": "fdm_process_single_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP097", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "sparse_infill_density": "25%", + "skeleton_infill_density": "25%", + "skin_infill_density": "25%", + "travel_speed": [ + "700" + ], + "wall_loops": "4", + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json index 111348a26c..53ca56dde6 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL A1M 0.6 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.30mm Strength @BBL A1M 0.6 nozzle", - "inherits": "fdm_process_single_0.30_nozzle_0.6", - "from": "system", - "setting_id": "GP061", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle" - ] -} + "type": "process", + "name": "0.30mm Strength @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_single_0.30_nozzle_0.6", + "from": "system", + "setting_id": "GP061", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has more wall loops and a higher sparse infill density. So, it results in higher strength of the prints, but more filament consumption and longer printing time.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json index 4394c363d0..92598e6ea0 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL P1P 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -94,6 +94,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -130,34 +138,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json index 99b2f43361..30c7a5b091 100644 --- a/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.30mm Strength @BBL X1C 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -94,6 +94,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -130,34 +138,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json index 1e60033ace..520fb58498 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL A2L 0.8 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2C 0.8 nozzle.json new file mode 100644 index 0000000000..e1ef4deb01 --- /dev/null +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2C 0.8 nozzle.json @@ -0,0 +1,81 @@ +{ + "type": "process", + "name": "0.32mm Balanced Quality @BBL H2C 0.8 nozzle", + "inherits": "fdm_process_dual_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP164", + "instantiation": "true", + "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "350", + "350", + "350" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ] +} diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json index cd60ebe8af..56ddf4cc97 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL H2S 0.8 nozzle.json @@ -14,14 +14,19 @@ "10000", "10000" ], + "elefant_foot_compensation": "0.15", + "enable_overhang_speed": [ + "1", + "1" + ], + "enable_height_slowdown": [ + "0", + "0" + ], "gap_infill_speed": [ "50", "50" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" @@ -34,10 +39,38 @@ "250", "250" ], + "initial_layer_travel_acceleration": [ + "6000", + "6000" + ], + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], "outer_wall_speed": [ "200", "200" ], + "outer_wall_acceleration": [ + "5000", + "5000" + ], + "overhang_1_4_speed": [ + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50" + ], "overhang_3_4_speed": [ "30", "30" @@ -46,39 +79,28 @@ "10", "10" ], - "prime_tower_brim_width": "-1", "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "prime_tower_flat_ironing": "1", + "print_extruder_id": [ + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], "sparse_infill_speed": [ "350", "350" ], - "top_surface_speed": [ - "200", - "200" + "support_interface_speed": [ + "80", + "80" ], - "travel_speed": [ - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2S 0.8 nozzle" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "travel_acceleration": [ - "10000", - "10000" - ], - "enable_overhang_speed": [ - "1", - "1" - ], - "enable_height_slowdown": [ - "0", - "0" + "support_speed": [ + "150", + "150" ], "slowdown_start_height": [ "0", @@ -104,34 +126,6 @@ "100000", "100000" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], - "outer_wall_acceleration": [ - "5000", - "5000" - ], - "overhang_1_4_speed": [ - "0", - "0" - ], - "overhang_2_4_speed": [ - "50", - "50" - ], - "print_extruder_id": [ - "1", - "1" - ], - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], "small_perimeter_speed": [ "50%", "50%" @@ -144,13 +138,25 @@ "100%", "100%" ], - "support_interface_speed": [ - "80", - "80" + "top_surface_speed": [ + "200", + "200" ], - "support_speed": [ - "150", - "150" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" ], "top_surface_acceleration": [ "2000", @@ -164,5 +170,8 @@ "80%", "80%" ], - "prime_tower_flat_ironing": "1" + "monotonic_travel_into_wall": "45.0", + "compatible_printers": [ + "Bambu Lab H2S 0.8 nozzle" + ] } diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json index f0049b42e3..979edcca6e 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL P2S 0.8 nozzle.json @@ -6,12 +6,10 @@ "setting_id": "GP215", "instantiation": "true", "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ "30", "30" ], - "enable_arc_fitting": "0", "default_acceleration": [ "10000", "10000" @@ -28,6 +26,10 @@ "50", "50" ], + "initial_layer_speed": [ + "35", + "35" + ], "inner_wall_speed": [ "300", "300" @@ -36,38 +38,26 @@ "250", "250" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "35" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "55", + "55" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], "outer_wall_speed": [ "200", "200" ], - "overhang_3_4_speed": [ - "15", - "15" - ], - "overhang_4_4_speed": [ - "10", - "10" - ], "outer_wall_acceleration": [ "5000", "5000" @@ -80,8 +70,16 @@ "50", "50" ], - "prime_tower_brim_width": "-1", + "overhang_3_4_speed": [ + "15", + "15" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], "prime_tower_width": "60", + "prime_tower_brim_width": "-1", "print_extruder_id": [ "1", "1" @@ -90,10 +88,19 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ "270", "270" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -130,22 +137,27 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "travel_speed": [ - "600", - "600" - ], + "top_surface_pattern": "monotonicline", "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -154,14 +166,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.8 nozzle" ] diff --git a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json index 5d1cf50bc4..42f062b60c 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Quality @BBL X2D 0.8 nozzle.json @@ -1,100 +1,100 @@ { - "type": "process", - "name": "0.32mm Balanced Quality @BBL X2D 0.8 nozzle", - "inherits": "fdm_process_dual_0.32_nozzle_0.8", - "from": "system", - "setting_id": "GP230", - "instantiation": "true", - "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", - "bridge_speed": [ - "30", - "50", - "30", - "30" - ], - "default_acceleration": [ - "10000", - "8000", - "4000", - "4000" - ], - "enable_tower_interface_features": "1", - "gap_infill_speed": [ - "50", - "250", - "50", - "50" - ], - "initial_layer_infill_speed": [ - "55", - "105", - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "50", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "150", - "150" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "150", - "150" - ], - "outer_wall_speed": [ - "200", - "200", - "50", - "50" - ], - "overhang_3_4_speed": [ - "15", - "30", - "25", - "25" - ], - "overhang_4_4_speed": [ - "10", - "10", - "5", - "5" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "sparse_infill_speed": [ - "270", - "600", - "100", - "100" - ], - "top_surface_pattern": "monotonicline", - "top_surface_speed": [ - "150", - "200", - "150", - "150" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ] -} + "type": "process", + "name": "0.32mm Balanced Quality @BBL X2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP230", + "instantiation": "true", + "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", + "bridge_speed": [ + "30", + "50", + "30", + "30" + ], + "default_acceleration": [ + "10000", + "8000", + "4000", + "4000" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "50", + "250", + "50", + "50" + ], + "initial_layer_infill_speed": [ + "55", + "105", + "55", + "55" + ], + "initial_layer_speed": [ + "35", + "50", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "150", + "150" + ], + "outer_wall_speed": [ + "200", + "200", + "50", + "50" + ], + "overhang_3_4_speed": [ + "15", + "30", + "25", + "25" + ], + "overhang_4_4_speed": [ + "10", + "10", + "5", + "5" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "sparse_infill_speed": [ + "270", + "600", + "100", + "100" + ], + "top_surface_pattern": "monotonicline", + "top_surface_speed": [ + "150", + "200", + "150", + "150" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2C 0.8 nozzle.json index 512bd79982..4b9b3c263c 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2C 0.8 nozzle.json @@ -1,93 +1,93 @@ { - "type": "process", - "name": "0.32mm Balanced Strength @BBL H2C 0.8 nozzle", - "inherits": "fdm_process_dual_0.32_nozzle_0.8", - "from": "system", - "setting_id": "GP257", - "instantiation": "true", - "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "enable_tower_interface_features": "1", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ] -} + "type": "process", + "name": "0.32mm Balanced Strength @BBL H2C 0.8 nozzle", + "inherits": "fdm_process_dual_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP257", + "instantiation": "true", + "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2D 0.8 nozzle.json index a108887ebf..41901a7069 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2D 0.8 nozzle.json @@ -1,92 +1,93 @@ { - "type": "process", - "name": "0.32mm Balanced Strength @BBL H2D 0.8 nozzle", - "inherits": "fdm_process_dual_0.32_nozzle_0.8", - "from": "system", - "setting_id": "GP149", - "instantiation": "true", - "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "process", + "name": "0.32mm Balanced Strength @BBL H2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP149", + "instantiation": "true", + "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2DP 0.8 nozzle.json index f276560d67..af06eed31e 100644 --- a/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Balanced Strength @BBL H2DP 0.8 nozzle.json @@ -1,92 +1,92 @@ { - "type": "process", - "name": "0.32mm Balanced Strength @BBL H2DP 0.8 nozzle", - "inherits": "fdm_process_dual_0.32_nozzle_0.8", - "from": "system", - "setting_id": "GP145", - "instantiation": "true", - "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ] -} + "type": "process", + "name": "0.32mm Balanced Strength @BBL H2DP 0.8 nozzle", + "inherits": "fdm_process_dual_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP145", + "instantiation": "true", + "description": "Strength profile for 0.8mm nozzle, prioritizing strength.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Optimal @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1 0.8 nozzle.json index 06c01c966c..3e3dd51698 100644 --- a/resources/profiles/BBL/process/0.32mm Optimal @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1 0.8 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.32mm Optimal @BBL A1 0.8 nozzle", - "inherits": "fdm_process_single_0.32_nozzle_0.8", - "from": "system", - "setting_id": "GP093", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "process", + "name": "0.32mm Optimal @BBL A1 0.8 nozzle", + "inherits": "fdm_process_single_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP093", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json index 7ca6b47420..883bc8c2ef 100644 --- a/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Optimal @BBL A1M 0.8 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.32mm Optimal @BBL A1M 0.8 nozzle", - "inherits": "fdm_process_single_0.32_nozzle_0.8", - "from": "system", - "setting_id": "GP058", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "process", + "name": "0.32mm Optimal @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_single_0.32_nozzle_0.8", + "from": "system", + "setting_id": "GP058", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a slightly smaller layer height, and results in slightly less but still apparent layer lines and slightly higher printing quality, but longer printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json index 8100421664..d3448ba1d6 100644 --- a/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Optimal @BBL P1P 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json index 304b99974a..8f195d7dbe 100644 --- a/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.32mm Standard @BBL X1C 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL A1 0.6 nozzle.json index 40deac5ead..73abfd9df9 100644 --- a/resources/profiles/BBL/process/0.36mm Draft @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Draft @BBL A1 0.6 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.36mm Draft @BBL A1 0.6 nozzle", - "inherits": "fdm_process_single_0.36_nozzle_0.6", - "from": "system", - "setting_id": "GP090", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "process", + "name": "0.36mm Draft @BBL A1 0.6 nozzle", + "inherits": "fdm_process_single_0.36_nozzle_0.6", + "from": "system", + "setting_id": "GP090", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json index 0b1a9b9cd8..3ced1815f0 100644 --- a/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Draft @BBL A1M 0.6 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.36mm Draft @BBL A1M 0.6 nozzle", - "inherits": "fdm_process_single_0.36_nozzle_0.6", - "from": "system", - "setting_id": "GP055", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle" - ] -} + "type": "process", + "name": "0.36mm Draft @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_single_0.36_nozzle_0.6", + "from": "system", + "setting_id": "GP055", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in more apparent layer lines and lower printing quality, but shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json index a36c99978a..6774911b11 100644 --- a/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Draft @BBL P1P 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json index 9103a177a7..853ec7ef95 100644 --- a/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.36mm Standard @BBL X1C 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A1 0.8 nozzle.json index 0030d939a1..7cfc16647b 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A1 0.8 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.40mm Standard @BBL A1 0.8 nozzle", - "inherits": "fdm_process_single_0.40_nozzle_0.8", - "from": "system", - "setting_id": "GP098", - "instantiation": "true", - "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "process", + "name": "0.40mm Standard @BBL A1 0.8 nozzle", + "inherits": "fdm_process_single_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP098", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json index 175ba969eb..7d5a5e2f8a 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A1M 0.8 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.40mm Standard @BBL A1M 0.8 nozzle", - "inherits": "fdm_process_single_0.40_nozzle_0.8", - "from": "system", - "setting_id": "GP037", - "instantiation": "true", - "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "process", + "name": "0.40mm Standard @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_single_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP037", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json index 74c452d588..14352053a6 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL A2L 0.8 nozzle.json @@ -9,7 +9,7 @@ "default_acceleration": [ "6000" ], - "elefant_foot_compensation": "0.075", + "elefant_foot_compensation": "0.15", "enable_arc_fitting": "0", "enable_height_slowdown": [ "1" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2C 0.8 nozzle.json index 535f1f1a2f..c95e58755b 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2C 0.8 nozzle.json @@ -1,82 +1,82 @@ { - "type": "process", - "name": "0.40mm Standard @BBL H2C 0.8 nozzle", - "inherits": "fdm_process_dual_0.40_nozzle_0.8", - "from": "system", - "setting_id": "GP258", - "instantiation": "true", - "description": "Standard profile for 0.8mm nozzle, prioritizing speed.", - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "enable_tower_interface_features": "1", - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "600", - "300", - "600" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "250", - "600" - ], - "outer_wall_speed": [ - "200", - "500", - "200", - "500" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "top_shell_layers": "4", - "compatible_printers": [ - "Bambu Lab H2C 0.8 nozzle" - ] -} + "type": "process", + "name": "0.40mm Standard @BBL H2C 0.8 nozzle", + "inherits": "fdm_process_dual_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP258", + "instantiation": "true", + "description": "Standard profile for 0.8mm nozzle, prioritizing speed.", + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "600", + "300", + "600" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "250", + "600" + ], + "outer_wall_speed": [ + "200", + "500", + "200", + "500" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "top_shell_layers": "4", + "compatible_printers": [ + "Bambu Lab H2C 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json index 3766a598a9..13b605e998 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2D 0.8 nozzle.json @@ -1,92 +1,93 @@ { - "type": "process", - "name": "0.40mm Standard @BBL H2D 0.8 nozzle", - "inherits": "fdm_process_dual_0.40_nozzle_0.8", - "from": "system", - "setting_id": "GP126", - "instantiation": "true", - "description": "Standard profile for 0.8mm nozzle, prioritizing speed.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_brim_width": "-1", - "prime_tower_width": "60", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D 0.8 nozzle" - ] -} + "type": "process", + "name": "0.40mm Standard @BBL H2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP126", + "instantiation": "true", + "description": "Standard profile for 0.8mm nozzle, prioritizing speed.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "enable_tower_interface_features": "1", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_brim_width": "-1", + "prime_tower_width": "60", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2DP 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2DP 0.8 nozzle.json index 57ba9e85b0..47f003e5cf 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2DP 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2DP 0.8 nozzle.json @@ -1,92 +1,92 @@ { - "type": "process", - "name": "0.40mm Standard @BBL H2DP 0.8 nozzle", - "inherits": "fdm_process_dual_0.40_nozzle_0.8", - "from": "system", - "setting_id": "GP147", - "instantiation": "true", - "description": "Standard profile for 0.8mm nozzle, prioritizing speed.", - "bridge_speed": [ - "50", - "50", - "50", - "50" - ], - "default_acceleration": [ - "8000", - "8000", - "8000", - "8000" - ], - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "50", - "50", - "50", - "50" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "300", - "250", - "300" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "outer_wall_speed": [ - "200", - "200", - "200", - "200" - ], - "overhang_3_4_speed": [ - "30", - "30", - "30", - "30" - ], - "overhang_4_4_speed": [ - "10", - "10", - "10", - "10" - ], - "prime_tower_width": "60", - "prime_tower_brim_width": "-1", - "sparse_infill_speed": [ - "350", - "600", - "350", - "600" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" - ], - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab H2D Pro 0.8 nozzle" - ] -} + "type": "process", + "name": "0.40mm Standard @BBL H2DP 0.8 nozzle", + "inherits": "fdm_process_dual_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP147", + "instantiation": "true", + "description": "Standard profile for 0.8mm nozzle, prioritizing speed.", + "bridge_speed": [ + "50", + "50", + "50", + "50" + ], + "default_acceleration": [ + "8000", + "8000", + "8000", + "8000" + ], + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "300", + "250", + "300" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "outer_wall_speed": [ + "200", + "200", + "200", + "200" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10" + ], + "prime_tower_width": "60", + "prime_tower_brim_width": "-1", + "sparse_infill_speed": [ + "350", + "600", + "350", + "600" + ], + "top_surface_speed": [ + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab H2D Pro 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json index 9f8035e903..8fd37314df 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL H2S 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "105", - "105" - ], "initial_layer_speed": [ "50", "50" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "300", "600" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "30", - "30" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "10", - "10" + "initial_layer_infill_speed": [ + "105", + "105" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "500" ], "outer_wall_acceleration": [ "5000", @@ -75,12 +71,16 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "500" + "overhang_3_4_speed": [ + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10" ], - "prime_tower_flat_ironing": "1", "prime_tower_width": "60", + "prime_tower_flat_ironing": "1", "print_extruder_id": [ "1", "1" @@ -93,17 +93,9 @@ "350", "600" ], - "small_perimeter_speed": [ - "50%", - "50%" - ], - "small_perimeter_threshold": [ - "0", - "0" - ], - "sparse_infill_acceleration": [ - "100%", - "100%" + "support_interface_speed": [ + "80", + "80" ], "support_speed": [ "150", @@ -133,18 +125,39 @@ "100000", "100000" ], - "support_interface_speed": [ - "80", - "80" + "small_perimeter_speed": [ + "50%", + "50%" + ], + "small_perimeter_threshold": [ + "0", + "0" + ], + "sparse_infill_acceleration": [ + "100%", + "100%" + ], + "top_shell_layers": "4", + "top_surface_speed": [ + "200", + "200" + ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "1000", "1000" ], - "top_surface_speed": [ - "200", - "200" - ], "top_surface_acceleration": [ "2000", "2000" @@ -153,14 +166,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab H2S 0.8 nozzle" ] diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json index b6596c47d5..f7926a63c8 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P1P 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json index eee70ed075..d3aaa84887 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL P2S 0.8 nozzle.json @@ -6,12 +6,10 @@ "setting_id": "GP157", "instantiation": "true", "description": "Standard profile for 0.8mm nozzle, prioritizing speed.", - "bottom_surface_pattern": "monotonicline", "bridge_speed": [ "30", "30" ], - "enable_arc_fitting": "0", "default_acceleration": [ "10000", "10000" @@ -29,6 +27,10 @@ "50", "50" ], + "initial_layer_speed": [ + "35", + "35" + ], "inner_wall_speed": [ "300", "600" @@ -37,34 +39,22 @@ "250", "600" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], - "initial_layer_speed": [ - "35", - "35" + "initial_layer_travel_acceleration": [ + "6000", + "6000" ], "initial_layer_acceleration": [ "500", "500" ], + "initial_layer_infill_speed": [ + "55", + "55" + ], "inner_wall_acceleration": [ "0", "0" ], - "initial_layer_travel_acceleration": [ - "6000", - "6000" - ], - "overhang_3_4_speed": [ - "15", - "15" - ], - "overhang_4_4_speed": [ - "10", - "10" - ], "outer_wall_speed": [ "200", "500" @@ -81,6 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], + "overhang_4_4_speed": [ + "10", + "10" + ], "print_extruder_id": [ "1", "1" @@ -89,10 +87,19 @@ "Direct Drive Standard", "Direct Drive High Flow" ], + "prime_tower_flat_ironing": "1", "sparse_infill_speed": [ "270", "600" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -129,22 +136,27 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], - "travel_speed": [ - "600", - "600" - ], + "top_surface_pattern": "monotonicline", "top_surface_speed": [ "150", "150" ], + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" + ], + "travel_speed": [ + "1000", + "1000" + ], "top_surface_acceleration": [ "2000", "2000" @@ -153,14 +165,11 @@ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "compatible_printers": [ "Bambu Lab P2S 0.8 nozzle" ] diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json index dabf9e5308..3fe093f4f7 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json index f15e9e7a91..a032a0ce4d 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X1C 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.40mm Standard @BBL X2D 0.8 nozzle.json b/resources/profiles/BBL/process/0.40mm Standard @BBL X2D 0.8 nozzle.json index 43b4034653..e40e7677f1 100644 --- a/resources/profiles/BBL/process/0.40mm Standard @BBL X2D 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.40mm Standard @BBL X2D 0.8 nozzle.json @@ -1,81 +1,81 @@ { - "type": "process", - "name": "0.40mm Standard @BBL X2D 0.8 nozzle", - "inherits": "fdm_process_dual_0.40_nozzle_0.8", - "from": "system", - "setting_id": "GP150", - "instantiation": "true", - "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", - "default_acceleration": [ - "10000", - "10000", - "4000", - "4000" - ], - "enable_tower_interface_features": "1", - "initial_layer_speed": [ - "35", - "35", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "600", - "150", - "150" - ], - "internal_solid_infill_speed": [ - "250", - "600", - "150", - "150" - ], - "outer_wall_acceleration": [ - "5000", - "5000", - "4000", - "4000" - ], - "outer_wall_speed": [ - "200", - "500", - "50", - "50" - ], - "overhang_3_4_speed": [ - "15", - "25", - "25", - "25" - ], - "overhang_4_4_speed": [ - "10", - "5", - "5", - "5" - ], - "prime_tower_brim_width": "-1", - "print_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow", - "Bowden Standard", - "Bowden High Flow" - ], - "sparse_infill_speed": [ - "270", - "600", - "100", - "100" - ], - "top_surface_pattern": "monotonicline", - "travel_speed": [ - "1000", - "1000", - "1000", - "1000" - ], - "compatible_printers": [ - "Bambu Lab X2D 0.8 nozzle" - ] -} + "type": "process", + "name": "0.40mm Standard @BBL X2D 0.8 nozzle", + "inherits": "fdm_process_dual_0.40_nozzle_0.8", + "from": "system", + "setting_id": "GP150", + "instantiation": "true", + "description": "It has a very big layer height, and results in very apparent layer lines, low printing quality and general printing time.", + "default_acceleration": [ + "10000", + "10000", + "4000", + "4000" + ], + "enable_tower_interface_features": "1", + "initial_layer_speed": [ + "35", + "35", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "600", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "250", + "600", + "150", + "150" + ], + "outer_wall_acceleration": [ + "5000", + "5000", + "4000", + "4000" + ], + "outer_wall_speed": [ + "200", + "500", + "50", + "50" + ], + "overhang_3_4_speed": [ + "15", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "10", + "5", + "5", + "5" + ], + "prime_tower_brim_width": "-1", + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Bowden Standard", + "Bowden High Flow" + ], + "sparse_infill_speed": [ + "270", + "600", + "100", + "100" + ], + "top_surface_pattern": "monotonicline", + "travel_speed": [ + "1000", + "1000", + "1000", + "1000" + ], + "compatible_printers": [ + "Bambu Lab X2D 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1 0.6 nozzle.json index 5ec42977f7..9a1a12c2d5 100644 --- a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1 0.6 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.42mm Extra Draft @BBL A1 0.6 nozzle", - "inherits": "fdm_process_single_0.42_nozzle_0.6", - "from": "system", - "setting_id": "GP091", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.6 nozzle" - ] -} + "type": "process", + "name": "0.42mm Extra Draft @BBL A1 0.6 nozzle", + "inherits": "fdm_process_single_0.42_nozzle_0.6", + "from": "system", + "setting_id": "GP091", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json index a47a365981..995e7946b1 100644 --- a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL A1M 0.6 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.42mm Extra Draft @BBL A1M 0.6 nozzle", - "inherits": "fdm_process_single_0.42_nozzle_0.6", - "from": "system", - "setting_id": "GP056", - "instantiation": "true", - "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.6 nozzle" - ] -} + "type": "process", + "name": "0.42mm Extra Draft @BBL A1M 0.6 nozzle", + "inherits": "fdm_process_single_0.42_nozzle_0.6", + "from": "system", + "setting_id": "GP056", + "instantiation": "true", + "description": "Compared with the default profile of a 0.6 mm nozzle, it has a bigger layer height, and results in much more apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.6 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json index e4a31d3d12..7179f43bd6 100644 --- a/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Extra Draft @BBL P1P 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json index ebc423cf93..7b0306c0af 100644 --- a/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json +++ b/resources/profiles/BBL/process/0.42mm Standard @BBL X1C 0.6 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,9 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "15", - "15" + "initial_layer_acceleration": [ + "500", + "500" + ], + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -71,14 +71,14 @@ "50", "50" ], + "overhang_3_4_speed": [ + "15", + "15" + ], "overhang_4_4_speed": [ "10", "10" ], - "outer_wall_speed": [ - "120", - "120" - ], "print_extruder_id": [ "1", "1" @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL A1 0.8 nozzle.json index 2131a39875..4e46c6aa0b 100644 --- a/resources/profiles/BBL/process/0.48mm Draft @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Draft @BBL A1 0.8 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.48mm Draft @BBL A1 0.8 nozzle", - "inherits": "fdm_process_single_0.48_nozzle_0.8", - "from": "system", - "setting_id": "GP094", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "process", + "name": "0.48mm Draft @BBL A1 0.8 nozzle", + "inherits": "fdm_process_single_0.48_nozzle_0.8", + "from": "system", + "setting_id": "GP094", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json index 0f059c59b2..cd95a8ce15 100644 --- a/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Draft @BBL A1M 0.8 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.48mm Draft @BBL A1M 0.8 nozzle", - "inherits": "fdm_process_single_0.48_nozzle_0.8", - "from": "system", - "setting_id": "GP059", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "process", + "name": "0.48mm Draft @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_single_0.48_nozzle_0.8", + "from": "system", + "setting_id": "GP059", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a bigger layer height, and results in very apparent layer lines and much lower printing quality, but shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json index cf788c3832..aad6cf2dfd 100644 --- a/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Draft @BBL P1P 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json index 12de9a8108..f620fea934 100644 --- a/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.48mm Standard @BBL X1C 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1 0.8 nozzle.json index 1114b908fa..bb2888bdd0 100644 --- a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1 0.8 nozzle.json @@ -1,19 +1,19 @@ { - "type": "process", - "name": "0.56mm Extra Draft @BBL A1 0.8 nozzle", - "inherits": "fdm_process_single_0.56_nozzle_0.8", - "from": "system", - "setting_id": "GP095", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "elefant_foot_compensation": "0.075", - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 0.8 nozzle" - ] -} + "type": "process", + "name": "0.56mm Extra Draft @BBL A1 0.8 nozzle", + "inherits": "fdm_process_single_0.56_nozzle_0.8", + "from": "system", + "setting_id": "GP095", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "elefant_foot_compensation": "0.075", + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json index c2b0a10848..0ab9ba9245 100644 --- a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL A1M 0.8 nozzle.json @@ -1,18 +1,18 @@ { - "type": "process", - "name": "0.56mm Extra Draft @BBL A1M 0.8 nozzle", - "inherits": "fdm_process_single_0.56_nozzle_0.8", - "from": "system", - "setting_id": "GP060", - "instantiation": "true", - "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", - "default_acceleration": [ - "6000" - ], - "travel_speed": [ - "700" - ], - "compatible_printers": [ - "Bambu Lab A1 mini 0.8 nozzle" - ] -} + "type": "process", + "name": "0.56mm Extra Draft @BBL A1M 0.8 nozzle", + "inherits": "fdm_process_single_0.56_nozzle_0.8", + "from": "system", + "setting_id": "GP060", + "instantiation": "true", + "description": "Compared with the default profile of a 0.8 mm nozzle, it has a much bigger layer height, and results in extremely apparent layer lines and much lower printing quality, but much shorter printing time in some printing cases.", + "default_acceleration": [ + "6000" + ], + "travel_speed": [ + "700" + ], + "compatible_printers": [ + "Bambu Lab A1 mini 0.8 nozzle" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json index 1b4d5ee0c3..538a4ea1e6 100644 --- a/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Extra Draft @BBL P1P 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json index 2745935c6c..10244b33ba 100644 --- a/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/BBL/process/0.56mm Standard @BBL X1C 0.8 nozzle.json @@ -27,22 +27,10 @@ "50", "50" ], - "initial_layer_infill_speed": [ - "55", - "55" - ], "initial_layer_speed": [ "35", "35" ], - "initial_layer_acceleration": [ - "500", - "500" - ], - "inner_wall_acceleration": [ - "0", - "0" - ], "inner_wall_speed": [ "150", "150" @@ -55,13 +43,21 @@ "6000", "6000" ], - "overhang_3_4_speed": [ - "25", - "25" + "initial_layer_acceleration": [ + "500", + "500" ], - "overhang_4_4_speed": [ - "5", - "5" + "initial_layer_infill_speed": [ + "55", + "55" + ], + "inner_wall_acceleration": [ + "0", + "0" + ], + "outer_wall_speed": [ + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -75,9 +71,13 @@ "50", "50" ], - "outer_wall_speed": [ - "120", - "120" + "overhang_3_4_speed": [ + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5" ], "print_extruder_id": [ "1", @@ -91,6 +91,14 @@ "100", "100" ], + "support_interface_speed": [ + "80", + "80" + ], + "support_speed": [ + "150", + "150" + ], "slowdown_start_height": [ "0", "0" @@ -127,34 +135,34 @@ "100%", "100%" ], - "support_speed": [ - "150", - "150" - ], - "support_interface_speed": [ - "80", - "80" - ], "top_surface_speed": [ "150", "150" ], - "top_surface_acceleration": [ - "2000", - "2000" + "top_solid_infill_flow_ratio": [ + "1", + "1" + ], + "travel_acceleration": [ + "10000", + "10000" + ], + "travel_short_distance_acceleration": [ + "250", + "250" ], "travel_speed": [ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000" + ], "travel_speed_z": [ "0", "0" ], - "travel_acceleration": [ - "10000", - "10000" - ], "vertical_shell_speed": [ "80%", "80%" diff --git a/resources/profiles/BBL/process/fdm_process_common.json b/resources/profiles/BBL/process/fdm_process_common.json index 5af292b424..ecb2956698 100644 --- a/resources/profiles/BBL/process/fdm_process_common.json +++ b/resources/profiles/BBL/process/fdm_process_common.json @@ -7,6 +7,7 @@ "bottom_color_penetration_layers": "3", "bottom_shell_thickness": "0", "bottom_surface_pattern": "monotonic", + "bottom_surface_density": "100", "bridge_flow": "0.95", "bridge_no_support": "0", "bridge_speed": [ @@ -36,7 +37,9 @@ "infill_combination": "0", "infill_direction": "45", "infill_wall_overlap": "15%", + "monotonic_travel_into_wall": "0.0", "initial_layer_line_width": "0.5", + "initial_layer_infill_line_width": "0.5", "initial_layer_print_height": "0.2", "initial_layer_speed": [ "20" @@ -69,6 +72,7 @@ "locked_skeleton_infill_pattern": "zigzag", "max_bridge_length": "0", "max_travel_detour_distance": "0", + "avoid_crossing_wall_includes_support": "0", "minimum_sparse_infill_area": "15", "only_one_wall_top": "1", "outer_wall_line_width": "0.42", @@ -88,26 +92,26 @@ "prime_tower_lift_height": "-1", "prime_tower_max_speed": "90", "prime_tower_flat_ironing": "0", - "enable_tower_interface_features": "0", - "enable_tower_interface_cooldown_during_tower": "0", "raft_layers": "0", "reduce_crossing_wall": "0", - "reduce_infill_retraction": "1", + "reduce_infill_retraction_mode": "Auto", "resolution": "0.012", "scarf_angle_threshold": "155", "seam_position": "aligned", "seam_placement_away_from_overhangs": "0", "skirt_distance": "2", + "skirt_per_object": "1", "skirt_height": "1", "skirt_loops": "0", "sparse_infill_density": "15%", + "fill_multiline": "1", "skeleton_infill_density": "15%", "skin_infill_density": "15%", "sparse_infill_line_width": "0.45", "skin_infill_line_width": "0.45", "skin_infill_depth": "2.0", "skeleton_infill_line_width": "0.45", - "sparse_infill_pattern": "crosshatch", + "sparse_infill_pattern": "grid", "sparse_infill_speed": [ "50" ], @@ -137,33 +141,63 @@ "support_threshold_angle": "30", "support_top_z_distance": "0.2", "support_type": "tree(auto)", + "enable_support_ironing": "0", + "support_ironing_pattern": "zig-zag", + "support_ironing_speed": "30", + "support_ironing_flow": "10%", + "support_ironing_spacing": "0.15", + "support_ironing_inset": "0.0", + "support_ironing_direction": "0", "seam_slope_type": "none", "seam_slope_start_height": "10%", "seam_slope_gap": "0", "seam_slope_min_length": "10", "symmetric_infill_y_axis": "0", + "sparse_infill_lattice_angle_1": "-45", + "sparse_infill_lattice_angle_2": "45", "top_shell_layers": "3", "top_color_penetration_layers": "3", "top_shell_thickness": "0.8", "top_surface_line_width": "0.42", "top_surface_pattern": "monotonicline", + "top_surface_density": "100", "top_surface_speed": [ "30" ], + "top_solid_infill_flow_ratio": [ + "1" + ], "travel_acceleration": [ "10000" ], + "travel_short_distance_acceleration": [ + "250" + ], "travel_speed": [ "400" ], "tree_support_branch_angle": "45", "tree_support_branch_diameter": "2", - "tree_support_wall_count": "0", + "tree_support_wall_count": "-1", "wall_generator": "classic", "wall_infill_order": "inner wall/outer wall/infill", "wall_loops": "2", "wipe_tower_no_sparse_layers": "0", "xy_contour_compensation": "0", "xy_hole_compensation": "0", - "z_direction_outwall_speed_continuous": "0" + "z_direction_outwall_speed_continuous": "0", + "enable_tower_interface_features": "0", + "sparse_infill_filament": "0", + "wall_filament": "0", + "solid_infill_filament": "0", + "infill_instead_top_bottom_surfaces": "0", + "fuzzy_skin": "none", + "fuzzy_skin_thickness": "0.3", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_first_layer": "0", + "fuzzy_skin_noise_type": "classic", + "fuzzy_skin_mode": "displacement", + "fuzzy_skin_scale": "1.0", + "fuzzy_skin_octaves": "4", + "fuzzy_skin_persistence": "0.5" } diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.06_nozzle_0.2.json index 466b5f3a11..de31d5a7d4 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.06_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.06_nozzle_0.2.json @@ -1,53 +1,54 @@ { - "type": "process", - "name": "fdm_process_dual_0.06_nozzle_0.2", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "initial_layer_infill_speed": [ - "70", - "70", - "70", - "70" - ], - "layer_height": "0.06", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_bottom_z_distance": "0.06", - "support_line_width": "0.22", - "support_top_z_distance": "0.06", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_dual_0.06_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.06", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.06", + "support_line_width": "0.22", + "support_top_z_distance": "0.06", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.2.json index 512a0e6c7d..10a7c041b2 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.2.json @@ -1,53 +1,54 @@ { - "type": "process", - "name": "fdm_process_dual_0.08_nozzle_0.2", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "initial_layer_infill_speed": [ - "70", - "70", - "70", - "70" - ], - "layer_height": "0.08", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_bottom_z_distance": "0.08", - "support_line_width": "0.22", - "support_top_z_distance": "0.08", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_dual_0.08_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.08", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.08", + "support_line_width": "0.22", + "support_top_z_distance": "0.08", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.4.json index 609bfd598f..8484f99833 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.4.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.08_nozzle_0.4.json @@ -1,55 +1,55 @@ { - "type": "process", - "name": "fdm_process_dual_0.08_nozzle_0.4", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "7", - "bottom_color_penetration_layers": "7", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "ironing_flow": "8%", - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "layer_height": "0.08", - "sparse_infill_speed": [ - "270", - "270", - "270", - "270" - ], - "support_bottom_z_distance": "0.08", - "support_threshold_angle": "15", - "support_top_z_distance": "0.08", - "top_shell_layers": "9", - "top_color_penetration_layers": "9", - "top_shell_thickness": "1.0" -} + "type": "process", + "name": "fdm_process_dual_0.08_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "7", + "bottom_color_penetration_layers": "7", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "ironing_flow": "8%", + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "layer_height": "0.08", + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "support_bottom_z_distance": "0.08", + "support_threshold_angle": "15", + "support_top_z_distance": "0.08", + "top_shell_layers": "9", + "top_color_penetration_layers": "9", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.10_nozzle_0.2.json index a39481dde0..dd333ca246 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.10_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.10_nozzle_0.2.json @@ -1,53 +1,54 @@ { - "type": "process", - "name": "fdm_process_dual_0.10_nozzle_0.2", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "initial_layer_infill_speed": [ - "70", - "70", - "70", - "70" - ], - "layer_height": "0.1", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_bottom_z_distance": "0.1", - "support_line_width": "0.22", - "support_top_z_distance": "0.1", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_dual_0.10_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.1", + "support_line_width": "0.22", + "support_top_z_distance": "0.1", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.2.json index 58ad34feff..cc9f8b2012 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.2.json @@ -1,53 +1,54 @@ { - "type": "process", - "name": "fdm_process_dual_0.12_nozzle_0.2", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "initial_layer_infill_speed": [ - "70", - "70", - "70", - "70" - ], - "layer_height": "0.12", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_bottom_z_distance": "0.12", - "support_line_width": "0.22", - "support_top_z_distance": "0.12", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_dual_0.12_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.12", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.12", + "support_line_width": "0.22", + "support_top_z_distance": "0.12", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.4.json index 60ee09e135..63b4fd4eb5 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.4.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.12_nozzle_0.4.json @@ -1,54 +1,54 @@ { - "type": "process", - "name": "fdm_process_dual_0.12_nozzle_0.4", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "layer_height": "0.12", - "sparse_infill_speed": [ - "270", - "270", - "270", - "270" - ], - "support_bottom_z_distance": "0.12", - "support_threshold_angle": "20", - "support_top_z_distance": "0.12", - "top_shell_layers": "5", - "top_color_penetration_layers": "5", - "top_shell_thickness": "0.6" -} + "type": "process", + "name": "fdm_process_dual_0.12_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "layer_height": "0.12", + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "support_bottom_z_distance": "0.12", + "support_threshold_angle": "20", + "support_top_z_distance": "0.12", + "top_shell_layers": "5", + "top_color_penetration_layers": "5", + "top_shell_thickness": "0.6" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_dual_0.14_nozzle_0.2.json index 8e4e1c88c3..c1475f0de9 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.14_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.14_nozzle_0.2.json @@ -1,53 +1,54 @@ { - "type": "process", - "name": "fdm_process_dual_0.14_nozzle_0.2", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "initial_layer_infill_speed": [ - "70", - "70", - "70", - "70" - ], - "layer_height": "0.14", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_bottom_z_distance": "0.14", - "support_line_width": "0.22", - "support_top_z_distance": "0.14", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_dual_0.14_nozzle_0.2", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "initial_layer_infill_speed": [ + "70", + "70", + "70", + "70" + ], + "layer_height": "0.14", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.14", + "support_line_width": "0.22", + "support_top_z_distance": "0.14", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.16_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.16_nozzle_0.4.json index 227709be64..e898f696ba 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.16_nozzle_0.4.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.16_nozzle_0.4.json @@ -1,54 +1,54 @@ { - "type": "process", - "name": "fdm_process_dual_0.16_nozzle_0.4", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "4", - "bottom_color_penetration_layers": "4", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "layer_height": "0.16", - "sparse_infill_speed": [ - "270", - "270", - "270", - "270" - ], - "support_bottom_z_distance": "0.16", - "support_threshold_angle": "25", - "support_top_z_distance": "0.16", - "top_shell_layers": "6", - "top_color_penetration_layers": "6", - "top_shell_thickness": "1.0" -} + "type": "process", + "name": "fdm_process_dual_0.16_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "4", + "bottom_color_penetration_layers": "4", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "layer_height": "0.16", + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "support_bottom_z_distance": "0.16", + "support_threshold_angle": "25", + "support_top_z_distance": "0.16", + "top_shell_layers": "6", + "top_color_penetration_layers": "6", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.18_nozzle_0.6.json index 0bb23d17ef..cd7d35631f 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.18_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.18_nozzle_0.6.json @@ -1,60 +1,61 @@ { - "type": "process", - "name": "fdm_process_dual_0.18_nozzle_0.6", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.18", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15", - "15", - "15", - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_bottom_z_distance": "0.18", - "support_line_width": "0.62", - "support_top_z_distance": "0.18", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.18_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.18", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_bottom_z_distance": "0.18", + "support_line_width": "0.62", + "support_top_z_distance": "0.18", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.20_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.20_nozzle_0.4.json index c05b0d9b98..32599695e7 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.20_nozzle_0.4.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.20_nozzle_0.4.json @@ -1,48 +1,48 @@ { - "type": "process", - "name": "fdm_process_dual_0.20_nozzle_0.4", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "sparse_infill_speed": [ - "270", - "270", - "270", - "270" - ], - "top_shell_layers": "5", - "top_color_penetration_layers": "5", - "top_shell_thickness": "1.0" -} + "type": "process", + "name": "fdm_process_dual_0.20_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "top_shell_layers": "5", + "top_color_penetration_layers": "5", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.4.json index 5538af711f..4348c147ac 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.4.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.4.json @@ -1,51 +1,51 @@ { - "type": "process", - "name": "fdm_process_dual_0.24_nozzle_0.4", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "layer_height": "0.24", - "sparse_infill_speed": [ - "270", - "270", - "270", - "270" - ], - "support_threshold_angle": "35", - "top_shell_layers": "4", - "top_color_penetration_layers": "4", - "top_shell_thickness": "1.0", - "top_surface_line_width": "0.45" -} + "type": "process", + "name": "fdm_process_dual_0.24_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "layer_height": "0.24", + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "support_threshold_angle": "35", + "top_shell_layers": "4", + "top_color_penetration_layers": "4", + "top_shell_thickness": "1.0", + "top_surface_line_width": "0.45" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.6.json index a0cd2198dd..9c46eec3bd 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.6.json @@ -1,58 +1,59 @@ { - "type": "process", - "name": "fdm_process_dual_0.24_nozzle_0.6", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.24", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15", - "15", - "15", - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.24_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.24", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.8.json index 2fe366bb68..cf20548536 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.24_nozzle_0.8.json @@ -1,65 +1,66 @@ { - "type": "process", - "name": "fdm_process_dual_0.24_nozzle_0.8", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.24", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25", - "25", - "25", - "25" - ], - "overhang_4_4_speed": [ - "5", - "5", - "5", - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.24_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.24", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.28_nozzle_0.4.json b/resources/profiles/BBL/process/fdm_process_dual_0.28_nozzle_0.4.json index d1b065987b..1124d1fb2c 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.28_nozzle_0.4.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.28_nozzle_0.4.json @@ -1,51 +1,51 @@ { - "type": "process", - "name": "fdm_process_dual_0.28_nozzle_0.4", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_speed": [ - "300", - "300", - "300", - "300" - ], - "internal_solid_infill_speed": [ - "250", - "250", - "250", - "250" - ], - "initial_layer_infill_speed": [ - "105", - "105", - "105", - "105" - ], - "layer_height": "0.28", - "sparse_infill_speed": [ - "270", - "270", - "270", - "270" - ], - "support_threshold_angle": "40", - "top_shell_layers": "4", - "top_color_penetration_layers": "4", - "top_shell_thickness": "1.0", - "top_surface_line_width": "0.45" -} + "type": "process", + "name": "fdm_process_dual_0.28_nozzle_0.4", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_speed": [ + "300", + "300", + "300", + "300" + ], + "internal_solid_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105" + ], + "layer_height": "0.28", + "sparse_infill_speed": [ + "270", + "270", + "270", + "270" + ], + "support_threshold_angle": "40", + "top_shell_layers": "4", + "top_color_penetration_layers": "4", + "top_shell_thickness": "1.0", + "top_surface_line_width": "0.45" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.30_nozzle_0.6.json index 3af15e170f..b5c048e4bb 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.30_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.30_nozzle_0.6.json @@ -1,58 +1,59 @@ { - "type": "process", - "name": "fdm_process_dual_0.30_nozzle_0.6", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.3", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15", - "15", - "15", - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.30_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.3", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.32_nozzle_0.8.json index 96f62ed044..1ada2fc45e 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.32_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.32_nozzle_0.8.json @@ -1,65 +1,66 @@ { - "type": "process", - "name": "fdm_process_dual_0.32_nozzle_0.8", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.32", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25", - "25", - "25", - "25" - ], - "overhang_4_4_speed": [ - "5", - "5", - "5", - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.32_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.32", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.36_nozzle_0.6.json index 322c77e321..2540101cac 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.36_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.36_nozzle_0.6.json @@ -1,58 +1,59 @@ { - "type": "process", - "name": "fdm_process_dual_0.36_nozzle_0.6", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.36", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15", - "15", - "15", - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.36_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.36", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.40_nozzle_0.8.json index b99854bb45..6cb42b32ed 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.40_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.40_nozzle_0.8.json @@ -1,65 +1,66 @@ { - "type": "process", - "name": "fdm_process_dual_0.40_nozzle_0.8", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.4", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25", - "25", - "25", - "25" - ], - "overhang_4_4_speed": [ - "5", - "5", - "5", - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.40_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.4", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_dual_0.42_nozzle_0.6.json index 398536fea8..fc0050582d 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.42_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.42_nozzle_0.6.json @@ -1,58 +1,59 @@ { - "type": "process", - "name": "fdm_process_dual_0.42_nozzle_0.6", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.42", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15", - "15", - "15", - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.42_nozzle_0.6", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.42", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15", + "15", + "15", + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.48_nozzle_0.8.json index 27bc5afa0e..74c6d15c86 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.48_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.48_nozzle_0.8.json @@ -1,65 +1,66 @@ { - "type": "process", - "name": "fdm_process_dual_0.48_nozzle_0.8", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.48", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25", - "25", - "25", - "25" - ], - "overhang_4_4_speed": [ - "5", - "5", - "5", - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.48_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.48", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_dual_0.56_nozzle_0.8.json index 6837c965f4..8792ef84e8 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_0.56_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_dual_0.56_nozzle_0.8.json @@ -1,65 +1,66 @@ { - "type": "process", - "name": "fdm_process_dual_0.56_nozzle_0.8", - "inherits": "fdm_process_dual_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30", - "30", - "30", - "30" - ], - "elefant_foot_compensation": "0.15", - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "20", - "20", - "20", - "20" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "initial_layer_infill_speed": [ - "55", - "55", - "55", - "55" - ], - "layer_height": "0.56", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25", - "25", - "25", - "25" - ], - "overhang_4_4_speed": [ - "5", - "5", - "5", - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100", - "100", - "100", - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150", - "150", - "150", - "150" - ] -} + "type": "process", + "name": "fdm_process_dual_0.56_nozzle_0.8", + "inherits": "fdm_process_dual_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30", + "30", + "30", + "30" + ], + "elefant_foot_compensation": "0.15", + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "20", + "20", + "20", + "20" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "initial_layer_infill_speed": [ + "55", + "55", + "55", + "55" + ], + "layer_height": "0.56", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25", + "25", + "25", + "25" + ], + "overhang_4_4_speed": [ + "5", + "5", + "5", + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100", + "100", + "100", + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150", + "150", + "150", + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_dual_common.json b/resources/profiles/BBL/process/fdm_process_dual_common.json index b247f2ffb1..1508b7620a 100644 --- a/resources/profiles/BBL/process/fdm_process_dual_common.json +++ b/resources/profiles/BBL/process/fdm_process_dual_common.json @@ -4,7 +4,6 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "enable_wrapping_detection": "0", "bridge_speed": [ "50", "50", @@ -35,6 +34,24 @@ "50", "50" ], + "initial_layer_speed": [ + "30", + "30", + "30", + "30" + ], + "inner_wall_speed": [ + "150", + "150", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150", + "150", + "150" + ], "initial_layer_travel_acceleration": [ "6000", "6000", @@ -53,29 +70,17 @@ "60", "60" ], - "initial_layer_speed": [ - "30", - "30", - "30", - "30" - ], "inner_wall_acceleration": [ "0", "0", "0", "0" ], - "inner_wall_speed": [ - "150", - "150", - "150", - "150" - ], - "internal_solid_infill_speed": [ - "150", - "150", - "150", - "150" + "outer_wall_speed": [ + "120", + "120", + "120", + "120" ], "outer_wall_acceleration": [ "5000", @@ -83,12 +88,6 @@ "5000", "5000" ], - "outer_wall_speed": [ - "120", - "120", - "120", - "120" - ], "overhang_1_4_speed": [ "0", "0", @@ -113,6 +112,7 @@ "10", "10" ], + "prime_tower_flat_ironing": "1", "print_extruder_id": [ "1", "1", @@ -125,7 +125,24 @@ "Direct Drive Standard", "Direct Drive High Flow" ], - "prime_tower_flat_ironing": "1", + "sparse_infill_speed": [ + "250", + "250", + "250", + "250" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150" + ], "slowdown_start_height": [ "0", "0", @@ -180,23 +197,17 @@ "100%", "100%" ], - "sparse_infill_speed": [ - "250", - "250", - "250", - "250" + "top_surface_speed": [ + "200", + "200", + "200", + "200" ], - "support_interface_speed": [ - "80", - "80", - "80", - "80" - ], - "support_speed": [ - "150", - "150", - "150", - "150" + "top_solid_infill_flow_ratio": [ + "1", + "1", + "1", + "1" ], "travel_acceleration": [ "10000", @@ -204,17 +215,11 @@ "10000", "10000" ], - "top_surface_acceleration": [ - "2000", - "2000", - "2000", - "2000" - ], - "top_surface_speed": [ - "200", - "200", - "200", - "200" + "travel_short_distance_acceleration": [ + "250", + "250", + "250", + "250" ], "travel_speed": [ "500", @@ -222,6 +227,12 @@ "500", "500" ], + "top_surface_acceleration": [ + "2000", + "2000", + "2000", + "2000" + ], "travel_speed_z": [ "0", "0", @@ -234,5 +245,6 @@ "80%", "80%" ], + "monotonic_travel_into_wall": "45.0", "z_direction_outwall_speed_continuous": "1" } diff --git a/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json index 4c3a6b3404..042c2bda0d 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.06_nozzle_0.2.json @@ -1,40 +1,41 @@ { - "type": "process", - "name": "fdm_process_single_0.06_nozzle_0.2", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "initial_layer_infill_speed": [ - "70" - ], - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "40" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "layer_height": "0.06", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100" - ], - "support_bottom_z_distance": "0.06", - "support_line_width": "0.22", - "support_top_z_distance": "0.06", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_single_0.06_nozzle_0.2", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "initial_layer_infill_speed": [ + "70" + ], + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "40" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "layer_height": "0.06", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100" + ], + "support_bottom_z_distance": "0.06", + "support_line_width": "0.22", + "support_top_z_distance": "0.06", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.08.json b/resources/profiles/BBL/process/fdm_process_single_0.08.json index ea4015ae57..416c7556ae 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.08.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.08.json @@ -1,48 +1,48 @@ { - "type": "process", - "name": "fdm_process_single_0.08", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "7", - "bottom_color_penetration_layers": "7", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "350" - ], - "initial_layer_infill_speed": [ - "105" - ], - "initial_layer_speed": [ - "50" - ], - "inner_wall_speed": [ - "350" - ], - "internal_solid_infill_speed": [ - "350" - ], - "ironing_flow": "8%", - "layer_height": "0.08", - "outer_wall_speed": [ - "200" - ], - "overhang_1_4_speed": [ - "60" - ], - "overhang_2_4_speed": [ - "30" - ], - "overhang_3_4_speed": [ - "10" - ], - "sparse_infill_speed": [ - "450" - ], - "support_bottom_z_distance": "0.08", - "support_threshold_angle": "15", - "support_top_z_distance": "0.08", - "top_shell_layers": "9", - "top_color_penetration_layers": "9" -} + "type": "process", + "name": "fdm_process_single_0.08", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "7", + "bottom_color_penetration_layers": "7", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "350" + ], + "initial_layer_infill_speed": [ + "105" + ], + "initial_layer_speed": [ + "50" + ], + "inner_wall_speed": [ + "350" + ], + "internal_solid_infill_speed": [ + "350" + ], + "ironing_flow": "8%", + "layer_height": "0.08", + "outer_wall_speed": [ + "200" + ], + "overhang_1_4_speed": [ + "60" + ], + "overhang_2_4_speed": [ + "30" + ], + "overhang_3_4_speed": [ + "10" + ], + "sparse_infill_speed": [ + "450" + ], + "support_bottom_z_distance": "0.08", + "support_threshold_angle": "15", + "support_top_z_distance": "0.08", + "top_shell_layers": "9", + "top_color_penetration_layers": "9" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json index 1ecdb07d2f..ce740cb37d 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.08_nozzle_0.2.json @@ -1,40 +1,41 @@ { - "type": "process", - "name": "fdm_process_single_0.08_nozzle_0.2", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "initial_layer_infill_speed": [ - "70" - ], - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "40" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "layer_height": "0.08", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100" - ], - "support_bottom_z_distance": "0.08", - "support_line_width": "0.22", - "support_top_z_distance": "0.08", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_single_0.08_nozzle_0.2", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "initial_layer_infill_speed": [ + "70" + ], + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "40" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "layer_height": "0.08", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100" + ], + "support_bottom_z_distance": "0.08", + "support_line_width": "0.22", + "support_top_z_distance": "0.08", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json index 12a60401c2..a8ff4a3c4f 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.10_nozzle_0.2.json @@ -1,40 +1,41 @@ { - "type": "process", - "name": "fdm_process_single_0.10_nozzle_0.2", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "initial_layer_infill_speed": [ - "70" - ], - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "40" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "layer_height": "0.1", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100" - ], - "support_bottom_z_distance": "0.1", - "support_line_width": "0.22", - "support_top_z_distance": "0.1", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_single_0.10_nozzle_0.2", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "initial_layer_infill_speed": [ + "70" + ], + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "40" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "layer_height": "0.1", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100" + ], + "support_bottom_z_distance": "0.1", + "support_line_width": "0.22", + "support_top_z_distance": "0.1", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.12.json b/resources/profiles/BBL/process/fdm_process_single_0.12.json index 352389dd4c..b418f09dd2 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.12.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.12.json @@ -1,48 +1,48 @@ { - "type": "process", - "name": "fdm_process_single_0.12", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "350" - ], - "initial_layer_infill_speed": [ - "105" - ], - "initial_layer_speed": [ - "50" - ], - "inner_wall_speed": [ - "350" - ], - "internal_solid_infill_speed": [ - "350" - ], - "layer_height": "0.12", - "outer_wall_speed": [ - "200" - ], - "overhang_1_4_speed": [ - "60" - ], - "overhang_2_4_speed": [ - "30" - ], - "overhang_3_4_speed": [ - "10" - ], - "sparse_infill_speed": [ - "430" - ], - "support_bottom_z_distance": "0.12", - "support_threshold_angle": "20", - "support_top_z_distance": "0.12", - "top_shell_layers": "5", - "top_color_penetration_layers": "5", - "top_shell_thickness": "0.6" -} + "type": "process", + "name": "fdm_process_single_0.12", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "350" + ], + "initial_layer_infill_speed": [ + "105" + ], + "initial_layer_speed": [ + "50" + ], + "inner_wall_speed": [ + "350" + ], + "internal_solid_infill_speed": [ + "350" + ], + "layer_height": "0.12", + "outer_wall_speed": [ + "200" + ], + "overhang_1_4_speed": [ + "60" + ], + "overhang_2_4_speed": [ + "30" + ], + "overhang_3_4_speed": [ + "10" + ], + "sparse_infill_speed": [ + "430" + ], + "support_bottom_z_distance": "0.12", + "support_threshold_angle": "20", + "support_top_z_distance": "0.12", + "top_shell_layers": "5", + "top_color_penetration_layers": "5", + "top_shell_thickness": "0.6" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json index 0d65394274..b298d08e01 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.12_nozzle_0.2.json @@ -1,40 +1,41 @@ { - "type": "process", - "name": "fdm_process_single_0.12_nozzle_0.2", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "initial_layer_infill_speed": [ - "70" - ], - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "40" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "layer_height": "0.12", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100" - ], - "support_bottom_z_distance": "0.12", - "support_line_width": "0.22", - "support_top_z_distance": "0.12", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_single_0.12_nozzle_0.2", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "initial_layer_infill_speed": [ + "70" + ], + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "40" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "layer_height": "0.12", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100" + ], + "support_bottom_z_distance": "0.12", + "support_line_width": "0.22", + "support_top_z_distance": "0.12", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json b/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json index 48d3fa2f44..27bce376cc 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.14_nozzle_0.2.json @@ -1,40 +1,41 @@ { - "type": "process", - "name": "fdm_process_single_0.14_nozzle_0.2", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "5", - "bottom_color_penetration_layers": "5", - "bridge_flow": "1", - "initial_layer_infill_speed": [ - "70" - ], - "initial_layer_line_width": "0.25", - "initial_layer_print_height": "0.1", - "initial_layer_speed": [ - "40" - ], - "inner_wall_line_width": "0.22", - "internal_solid_infill_line_width": "0.22", - "ironing_inset": "0.11", - "layer_height": "0.14", - "line_width": "0.22", - "outer_wall_line_width": "0.22", - "sparse_infill_line_width": "0.22", - "skin_infill_line_width": "0.22", - "skeleton_infill_line_width": "0.22", - "sparse_infill_speed": [ - "100" - ], - "support_bottom_z_distance": "0.14", - "support_line_width": "0.22", - "support_top_z_distance": "0.14", - "top_shell_layers": "7", - "top_color_penetration_layers": "7", - "top_surface_line_width": "0.22", - "top_surface_speed": [ - "150" - ], - "wall_loops": "4" -} + "type": "process", + "name": "fdm_process_single_0.14_nozzle_0.2", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "5", + "bottom_color_penetration_layers": "5", + "bridge_flow": "1", + "initial_layer_infill_speed": [ + "70" + ], + "initial_layer_line_width": "0.25", + "initial_layer_infill_line_width": "0.25", + "initial_layer_print_height": "0.1", + "initial_layer_speed": [ + "40" + ], + "inner_wall_line_width": "0.22", + "internal_solid_infill_line_width": "0.22", + "ironing_inset": "0.11", + "layer_height": "0.14", + "line_width": "0.22", + "outer_wall_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "skin_infill_line_width": "0.22", + "skeleton_infill_line_width": "0.22", + "sparse_infill_speed": [ + "100" + ], + "support_bottom_z_distance": "0.14", + "support_line_width": "0.22", + "support_top_z_distance": "0.14", + "top_shell_layers": "7", + "top_color_penetration_layers": "7", + "top_surface_line_width": "0.22", + "top_surface_speed": [ + "150" + ], + "wall_loops": "4" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.16.json b/resources/profiles/BBL/process/fdm_process_single_0.16.json index a288183508..a347766b0a 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.16.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.16.json @@ -1,48 +1,48 @@ { - "type": "process", - "name": "fdm_process_single_0.16", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bottom_shell_layers": "4", - "bottom_color_penetration_layers": "4", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "300" - ], - "initial_layer_infill_speed": [ - "105" - ], - "initial_layer_speed": [ - "50" - ], - "inner_wall_speed": [ - "300" - ], - "internal_solid_infill_speed": [ - "300" - ], - "layer_height": "0.16", - "outer_wall_speed": [ - "200" - ], - "overhang_1_4_speed": [ - "60" - ], - "overhang_2_4_speed": [ - "30" - ], - "overhang_3_4_speed": [ - "10" - ], - "sparse_infill_speed": [ - "330" - ], - "support_bottom_z_distance": "0.16", - "support_threshold_angle": "25", - "support_top_z_distance": "0.16", - "top_shell_layers": "6", - "top_color_penetration_layers": "6", - "top_shell_thickness": "1.0" -} + "type": "process", + "name": "fdm_process_single_0.16", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bottom_shell_layers": "4", + "bottom_color_penetration_layers": "4", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "300" + ], + "initial_layer_infill_speed": [ + "105" + ], + "initial_layer_speed": [ + "50" + ], + "inner_wall_speed": [ + "300" + ], + "internal_solid_infill_speed": [ + "300" + ], + "layer_height": "0.16", + "outer_wall_speed": [ + "200" + ], + "overhang_1_4_speed": [ + "60" + ], + "overhang_2_4_speed": [ + "30" + ], + "overhang_3_4_speed": [ + "10" + ], + "sparse_infill_speed": [ + "330" + ], + "support_bottom_z_distance": "0.16", + "support_threshold_angle": "25", + "support_top_z_distance": "0.16", + "top_shell_layers": "6", + "top_color_penetration_layers": "6", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json index 928a4ba1a4..d9d490c5c6 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.18_nozzle_0.6.json @@ -1,41 +1,42 @@ { - "type": "process", - "name": "fdm_process_single_0.18_nozzle_0.6", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "layer_height": "0.18", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100" - ], - "support_bottom_z_distance": "0.18", - "support_line_width": "0.62", - "support_top_z_distance": "0.18", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.18_nozzle_0.6", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "layer_height": "0.18", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100" + ], + "support_bottom_z_distance": "0.18", + "support_line_width": "0.62", + "support_top_z_distance": "0.18", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.20.json b/resources/profiles/BBL/process/fdm_process_single_0.20.json index 12dfa47697..7be86d5e24 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.20.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.20.json @@ -1,33 +1,33 @@ { - "type": "process", - "name": "fdm_process_single_0.20", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "250" - ], - "initial_layer_infill_speed": [ - "105" - ], - "initial_layer_speed": [ - "50" - ], - "inner_wall_speed": [ - "300" - ], - "internal_solid_infill_speed": [ - "250" - ], - "outer_wall_speed": [ - "200" - ], - "sparse_infill_speed": [ - "270" - ], - "top_shell_layers": "5", - "top_color_penetration_layers": "5", - "top_shell_thickness": "1.0" -} + "type": "process", + "name": "fdm_process_single_0.20", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "250" + ], + "initial_layer_infill_speed": [ + "105" + ], + "initial_layer_speed": [ + "50" + ], + "inner_wall_speed": [ + "300" + ], + "internal_solid_infill_speed": [ + "250" + ], + "outer_wall_speed": [ + "200" + ], + "sparse_infill_speed": [ + "270" + ], + "top_shell_layers": "5", + "top_color_penetration_layers": "5", + "top_shell_thickness": "1.0" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.24.json b/resources/profiles/BBL/process/fdm_process_single_0.24.json index e17fe3620a..4c87c79cb7 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.24.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.24.json @@ -1,36 +1,36 @@ { - "type": "process", - "name": "fdm_process_single_0.24", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "230" - ], - "initial_layer_infill_speed": [ - "105" - ], - "initial_layer_speed": [ - "50" - ], - "inner_wall_speed": [ - "230" - ], - "internal_solid_infill_speed": [ - "230" - ], - "layer_height": "0.24", - "outer_wall_speed": [ - "200" - ], - "sparse_infill_speed": [ - "230" - ], - "support_threshold_angle": "35", - "top_shell_layers": "4", - "top_color_penetration_layers": "4", - "top_shell_thickness": "1.0", - "top_surface_line_width": "0.45" -} + "type": "process", + "name": "fdm_process_single_0.24", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "230" + ], + "initial_layer_infill_speed": [ + "105" + ], + "initial_layer_speed": [ + "50" + ], + "inner_wall_speed": [ + "230" + ], + "internal_solid_infill_speed": [ + "230" + ], + "layer_height": "0.24", + "outer_wall_speed": [ + "200" + ], + "sparse_infill_speed": [ + "230" + ], + "support_threshold_angle": "35", + "top_shell_layers": "4", + "top_color_penetration_layers": "4", + "top_shell_thickness": "1.0", + "top_surface_line_width": "0.45" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json index a0f2a45f11..f1ca3158c2 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.6.json @@ -1,39 +1,40 @@ { - "type": "process", - "name": "fdm_process_single_0.24_nozzle_0.6", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "layer_height": "0.24", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.24_nozzle_0.6", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "layer_height": "0.24", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json index 86fabec271..c8da7bffea 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.24_nozzle_0.8.json @@ -1,43 +1,44 @@ { - "type": "process", - "name": "fdm_process_single_0.24_nozzle_0.8", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "layer_height": "0.24", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25" - ], - "overhang_4_4_speed": [ - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.24_nozzle_0.8", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "layer_height": "0.24", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25" + ], + "overhang_4_4_speed": [ + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.28.json b/resources/profiles/BBL/process/fdm_process_single_0.28.json index 0e5e24b0dd..959d0c5fce 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.28.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.28.json @@ -1,36 +1,36 @@ { - "type": "process", - "name": "fdm_process_single_0.28", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "elefant_foot_compensation": "0.15", - "gap_infill_speed": [ - "200" - ], - "initial_layer_infill_speed": [ - "105" - ], - "initial_layer_speed": [ - "50" - ], - "inner_wall_speed": [ - "200" - ], - "internal_solid_infill_speed": [ - "200" - ], - "layer_height": "0.28", - "outer_wall_speed": [ - "200" - ], - "sparse_infill_speed": [ - "200" - ], - "support_threshold_angle": "40", - "top_shell_layers": "4", - "top_color_penetration_layers": "4", - "top_shell_thickness": "1.0", - "top_surface_line_width": "0.45" -} + "type": "process", + "name": "fdm_process_single_0.28", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "elefant_foot_compensation": "0.15", + "gap_infill_speed": [ + "200" + ], + "initial_layer_infill_speed": [ + "105" + ], + "initial_layer_speed": [ + "50" + ], + "inner_wall_speed": [ + "200" + ], + "internal_solid_infill_speed": [ + "200" + ], + "layer_height": "0.28", + "outer_wall_speed": [ + "200" + ], + "sparse_infill_speed": [ + "200" + ], + "support_threshold_angle": "40", + "top_shell_layers": "4", + "top_color_penetration_layers": "4", + "top_shell_thickness": "1.0", + "top_surface_line_width": "0.45" +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json index b2cf4f8c9e..e2be1acd36 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.30_nozzle_0.6.json @@ -1,39 +1,40 @@ { - "type": "process", - "name": "fdm_process_single_0.30_nozzle_0.6", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "layer_height": "0.3", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.30_nozzle_0.6", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "layer_height": "0.3", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json index d2e0c39984..7d2cefd223 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.32_nozzle_0.8.json @@ -1,43 +1,44 @@ { - "type": "process", - "name": "fdm_process_single_0.32_nozzle_0.8", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "layer_height": "0.32", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25" - ], - "overhang_4_4_speed": [ - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.32_nozzle_0.8", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "layer_height": "0.32", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25" + ], + "overhang_4_4_speed": [ + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json index a99b9a146b..c366a84351 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.36_nozzle_0.6.json @@ -1,39 +1,40 @@ { - "type": "process", - "name": "fdm_process_single_0.36_nozzle_0.6", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "layer_height": "0.36", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.36_nozzle_0.6", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "layer_height": "0.36", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json index 663a268e1b..f8b344de32 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.40_nozzle_0.8.json @@ -1,43 +1,44 @@ { - "type": "process", - "name": "fdm_process_single_0.40_nozzle_0.8", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "layer_height": "0.4", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25" - ], - "overhang_4_4_speed": [ - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.40_nozzle_0.8", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "layer_height": "0.4", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25" + ], + "overhang_4_4_speed": [ + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json b/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json index 25d6b599f1..67f7131468 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.42_nozzle_0.6.json @@ -1,39 +1,40 @@ { - "type": "process", - "name": "fdm_process_single_0.42_nozzle_0.6", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.62", - "initial_layer_print_height": "0.3", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.62", - "internal_solid_infill_line_width": "0.62", - "ironing_inset": "0.31", - "layer_height": "0.42", - "line_width": "0.62", - "outer_wall_line_width": "0.62", - "overhang_3_4_speed": [ - "15" - ], - "sparse_infill_line_width": "0.62", - "skin_infill_line_width": "0.62", - "skeleton_infill_line_width": "0.62", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.42_nozzle_0.6", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.62", + "initial_layer_infill_line_width": "0.62", + "initial_layer_print_height": "0.3", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.62", + "internal_solid_infill_line_width": "0.62", + "ironing_inset": "0.31", + "layer_height": "0.42", + "line_width": "0.62", + "outer_wall_line_width": "0.62", + "overhang_3_4_speed": [ + "15" + ], + "sparse_infill_line_width": "0.62", + "skin_infill_line_width": "0.62", + "skeleton_infill_line_width": "0.62", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.62", + "top_surface_line_width": "0.62", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json index 030c505799..c05df03512 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.48_nozzle_0.8.json @@ -1,43 +1,44 @@ { - "type": "process", - "name": "fdm_process_single_0.48_nozzle_0.8", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.31", - "layer_height": "0.48", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25" - ], - "overhang_4_4_speed": [ - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.48_nozzle_0.8", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.31", + "layer_height": "0.48", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25" + ], + "overhang_4_4_speed": [ + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json b/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json index 9cbbd608d1..fc8f01f85f 100644 --- a/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json +++ b/resources/profiles/BBL/process/fdm_process_single_0.56_nozzle_0.8.json @@ -1,43 +1,44 @@ { - "type": "process", - "name": "fdm_process_single_0.56_nozzle_0.8", - "inherits": "fdm_process_single_common", - "from": "system", - "instantiation": "false", - "bridge_flow": "1", - "bridge_speed": [ - "30" - ], - "initial_layer_infill_speed": [ - "55" - ], - "initial_layer_line_width": "0.82", - "initial_layer_print_height": "0.4", - "initial_layer_speed": [ - "35" - ], - "inner_wall_line_width": "0.82", - "internal_solid_infill_line_width": "0.82", - "ironing_inset": "0.41", - "layer_height": "0.56", - "line_width": "0.82", - "outer_wall_line_width": "0.82", - "overhang_3_4_speed": [ - "25" - ], - "overhang_4_4_speed": [ - "5" - ], - "sparse_infill_line_width": "0.82", - "skin_infill_line_width": "0.82", - "skeleton_infill_line_width": "0.82", - "sparse_infill_speed": [ - "100" - ], - "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "top_surface_speed": [ - "150" - ] -} + "type": "process", + "name": "fdm_process_single_0.56_nozzle_0.8", + "inherits": "fdm_process_single_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", + "bridge_speed": [ + "30" + ], + "initial_layer_infill_speed": [ + "55" + ], + "initial_layer_line_width": "0.82", + "initial_layer_infill_line_width": "0.82", + "initial_layer_print_height": "0.4", + "initial_layer_speed": [ + "35" + ], + "inner_wall_line_width": "0.82", + "internal_solid_infill_line_width": "0.82", + "ironing_inset": "0.41", + "layer_height": "0.56", + "line_width": "0.82", + "outer_wall_line_width": "0.82", + "overhang_3_4_speed": [ + "25" + ], + "overhang_4_4_speed": [ + "5" + ], + "sparse_infill_line_width": "0.82", + "skin_infill_line_width": "0.82", + "skeleton_infill_line_width": "0.82", + "sparse_infill_speed": [ + "100" + ], + "support_line_width": "0.82", + "top_surface_line_width": "0.82", + "top_surface_pattern": "monotonic", + "top_surface_speed": [ + "150" + ] +} \ No newline at end of file diff --git a/resources/profiles/BBL/process/fdm_process_single_common.json b/resources/profiles/BBL/process/fdm_process_single_common.json index 36bd1611d5..12aee19488 100644 --- a/resources/profiles/BBL/process/fdm_process_single_common.json +++ b/resources/profiles/BBL/process/fdm_process_single_common.json @@ -1,106 +1,106 @@ { - "type": "process", - "name": "fdm_process_single_common", - "inherits": "fdm_process_common", - "from": "system", - "instantiation": "false", - "bridge_speed": [ - "50" - ], - "enable_overhang_speed": [ - "1" - ], - "enable_height_slowdown": [ - "0" - ], - "gap_infill_speed": [ - "50" - ], - "initial_layer_acceleration": [ - "500" - ], - "initial_layer_infill_speed": [ - "60" - ], - "initial_layer_speed": [ - "30" - ], - "inner_wall_acceleration": [ - "0" - ], - "inner_wall_speed": [ - "150" - ], - "internal_solid_infill_speed": [ - "150" - ], - "outer_wall_acceleration": [ - "5000" - ], - "overhang_1_4_speed": [ - "0" - ], - "overhang_2_4_speed": [ - "50" - ], - "overhang_3_4_speed": [ - "30" - ], - "overhang_4_4_speed": [ - "10" - ], - "print_extruder_id": [ - "1" - ], - "print_extruder_variant": [ - "Direct Drive Standard" - ], - "slowdown_start_height": [ - "0" - ], - "slowdown_start_speed": [ - "1000" - ], - "slowdown_start_acc": [ - "100000" - ], - "slowdown_end_height": [ - "400" - ], - "slowdown_end_speed": [ - "1000" - ], - "slowdown_end_acc": [ - "100000" - ], - "small_perimeter_speed": [ - "50%" - ], - "small_perimeter_threshold": [ - "0" - ], - "sparse_infill_acceleration": [ - "100%" - ], - "sparse_infill_speed": [ - "250" - ], - "support_speed": [ - "150" - ], - "top_surface_acceleration": [ - "2000" - ], - "top_surface_speed": [ - "200" - ], - "travel_speed": [ - "500" - ], - "travel_speed_z": [ - "0" - ], - "vertical_shell_speed": [ - "80%" - ] -} + "type": "process", + "name": "fdm_process_single_common", + "inherits": "fdm_process_common", + "from": "system", + "instantiation": "false", + "bridge_speed": [ + "50" + ], + "enable_overhang_speed": [ + "1" + ], + "enable_height_slowdown": [ + "0" + ], + "gap_infill_speed": [ + "50" + ], + "initial_layer_acceleration": [ + "500" + ], + "initial_layer_infill_speed": [ + "60" + ], + "initial_layer_speed": [ + "30" + ], + "inner_wall_acceleration": [ + "0" + ], + "inner_wall_speed": [ + "150" + ], + "internal_solid_infill_speed": [ + "150" + ], + "outer_wall_acceleration": [ + "5000" + ], + "overhang_1_4_speed": [ + "0" + ], + "overhang_2_4_speed": [ + "50" + ], + "overhang_3_4_speed": [ + "30" + ], + "overhang_4_4_speed": [ + "10" + ], + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "slowdown_start_height": [ + "0" + ], + "slowdown_start_speed": [ + "1000" + ], + "slowdown_start_acc": [ + "100000" + ], + "slowdown_end_height": [ + "400" + ], + "slowdown_end_speed": [ + "1000" + ], + "slowdown_end_acc": [ + "100000" + ], + "small_perimeter_speed": [ + "50%" + ], + "small_perimeter_threshold": [ + "0" + ], + "sparse_infill_acceleration": [ + "100%" + ], + "sparse_infill_speed": [ + "250" + ], + "support_speed": [ + "150" + ], + "top_surface_acceleration": [ + "2000" + ], + "top_surface_speed": [ + "200" + ], + "travel_speed": [ + "500" + ], + "travel_speed_z": [ + "0" + ], + "vertical_shell_speed": [ + "80%" + ] +} \ No newline at end of file diff --git a/resources/profiles/BIQU.json b/resources/profiles/BIQU.json index 2dd4115290..1230988a61 100644 --- a/resources/profiles/BIQU.json +++ b/resources/profiles/BIQU.json @@ -1,6 +1,6 @@ { "name": "BIQU", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "BIQU configurations", "machine_model_list": [ diff --git a/resources/profiles/BIQU/machine/BIQU B1 (0.4 nozzle).json b/resources/profiles/BIQU/machine/BIQU B1 (0.4 nozzle).json index 1f98c673e8..40e597b6e2 100644 --- a/resources/profiles/BIQU/machine/BIQU B1 (0.4 nozzle).json +++ b/resources/profiles/BIQU/machine/BIQU B1 (0.4 nozzle).json @@ -24,45 +24,59 @@ ], "gcode_flavor": "marlin", "machine_max_acceleration_e": [ + "10000", "10000" ], "machine_max_acceleration_extruding": [ + "1000", "1000" ], "machine_max_acceleration_retracting": [ + "1000", "1000" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "100", "100" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "10", "10" ], "machine_max_jerk_y": [ + "10", "10" ], "machine_max_jerk_z": [ + "0.3", "0.3" ], "machine_max_junction_deviation": [ diff --git a/resources/profiles/BIQU/machine/BIQU BX (0.4 nozzle).json b/resources/profiles/BIQU/machine/BIQU BX (0.4 nozzle).json index 8acfe76925..ecd11d7c5a 100644 --- a/resources/profiles/BIQU/machine/BIQU BX (0.4 nozzle).json +++ b/resources/profiles/BIQU/machine/BIQU BX (0.4 nozzle).json @@ -24,45 +24,59 @@ ], "gcode_flavor": "marlin", "machine_max_acceleration_e": [ + "10000", "10000" ], "machine_max_acceleration_extruding": [ + "1000", "1000" ], "machine_max_acceleration_retracting": [ + "1000", "1000" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "100", "100" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "10", "10" ], "machine_max_jerk_y": [ + "10", "10" ], "machine_max_jerk_z": [ + "0.3", "0.3" ], "machine_max_junction_deviation": [ diff --git a/resources/profiles/Blocks.json b/resources/profiles/Blocks.json index f24bcb81da..e4dc6527a7 100644 --- a/resources/profiles/Blocks.json +++ b/resources/profiles/Blocks.json @@ -1,6 +1,6 @@ { "name": "Blocks", - "version": "02.04.00.04", + "version": "02.04.00.14", "force_update": "0", "description": "Blocks configurations", "machine_model_list": [ @@ -43,8 +43,8 @@ "sub_path": "process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json" }, { - "name": "0.20mm Standard 0.4 nozzle @Blocks", - "sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks.json" + "name": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks_Pro_S100.json" }, { "name": "0.20mm Standard 0.4 nozzle @Blocks_RD50_V2", @@ -55,8 +55,8 @@ "sub_path": "process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json" }, { - "name": "0.24mm Draft 0.4 nozzle @Blocks", - "sub_path": "process/0.24mm Draft 0.4 nozzle @Blocks.json" + "name": "0.24mm Draft 0.4 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.24mm Draft 0.4 nozzle @Blocks_Pro_S100.json" }, { "name": "0.24mm Draft 0.4 nozzle @Blocks_RD50_V2", @@ -75,8 +75,8 @@ "sub_path": "process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json" }, { - "name": "0.30mm Extra Draft 0.4 nozzle @Blocks", - "sub_path": "process/0.30mm Extra Draft 0.4 nozzle @Blocks.json" + "name": "0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100.json" }, { "name": "fdm_process_common 0.6 nozzle", @@ -111,8 +111,8 @@ "sub_path": "process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json" }, { - "name": "0.30mm Standard 0.6 nozzle @Blocks", - "sub_path": "process/0.30mm Standard 0.6 nozzle @Blocks.json" + "name": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.30mm Standard 0.6 nozzle @Blocks_Pro_S100.json" }, { "name": "0.32mm Draft 0.6 nozzle @Blocks_RD50_V2", @@ -131,12 +131,12 @@ "sub_path": "process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json" }, { - "name": "0.40mm Draft 0.6 nozzle @Blocks", - "sub_path": "process/0.40mm Draft 0.6 nozzle @Blocks.json" + "name": "0.40mm Draft 0.6 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.40mm Draft 0.6 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.30mm Optimal 0.8 nozzle @Blocks", - "sub_path": "process/0.30mm Optimal 0.8 nozzle @Blocks.json" + "name": "0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100.json" }, { "name": "0.30mm Optimal 0.8 nozzle @Blocks_RD50_V2", @@ -155,8 +155,8 @@ "sub_path": "process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json" }, { - "name": "0.40mm Standard 0.8 nozzle @Blocks", - "sub_path": "process/0.40mm Standard 0.8 nozzle @Blocks.json" + "name": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.40mm Standard 0.8 nozzle @Blocks_Pro_S100.json" }, { "name": "0.46mm Draft 0.8 nozzle @Blocks_RD50_V2", @@ -167,8 +167,8 @@ "sub_path": "process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json" }, { - "name": "0.50mm Draft 0.8 nozzle @Blocks", - "sub_path": "process/0.50mm Draft 0.8 nozzle @Blocks.json" + "name": "0.50mm Draft 0.8 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.50mm Draft 0.8 nozzle @Blocks_Pro_S100.json" }, { "name": "0.54mm Extra Draft 0.8 nozzle @Blocks_RD50_V2", @@ -179,36 +179,36 @@ "sub_path": "process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json" }, { - "name": "0.30mm Optimal 1.0 nozzle @Blocks", - "sub_path": "process/0.30mm Optimal 1.0 nozzle @Blocks.json" + "name": "0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.50mm Standard 1.0 nozzle @Blocks", - "sub_path": "process/0.50mm Standard 1.0 nozzle @Blocks.json" + "name": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.50mm Standard 1.0 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.60mm Draft 1.0 nozzle @Blocks", - "sub_path": "process/0.60mm Draft 1.0 nozzle @Blocks.json" + "name": "0.60mm Draft 1.0 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.60mm Draft 1.0 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.70mm Extra Draft 1.0 nozzle @Blocks", - "sub_path": "process/0.70mm Extra Draft 1.0 nozzle @Blocks.json" + "name": "0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.50mm Optimal 1.2 nozzle @Blocks", - "sub_path": "process/0.50mm Optimal 1.2 nozzle @Blocks.json" + "name": "0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.60mm Standard 1.2 nozzle @Blocks", - "sub_path": "process/0.60mm Standard 1.2 nozzle @Blocks.json" + "name": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.60mm Standard 1.2 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.70mm Draft 1.2 nozzle @Blocks", - "sub_path": "process/0.70mm Draft 1.2 nozzle @Blocks.json" + "name": "0.70mm Draft 1.2 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.70mm Draft 1.2 nozzle @Blocks_Pro_S100.json" }, { - "name": "0.80mm Extra Draft 1.2 nozzle @Blocks", - "sub_path": "process/0.80mm Extra Draft 1.2 nozzle @Blocks.json" + "name": "0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100", + "sub_path": "process/0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100.json" } ], "filament_list": [ @@ -249,48 +249,148 @@ "sub_path": "filament/fdm_filament_tpu.json" }, { - "name": "Generic ABS @Blocks", - "sub_path": "filament/Generic ABS @Blocks.json" + "name": "Blocks ABS @base", + "sub_path": "filament/Blocks ABS @base.json" }, { - "name": "Generic ASA @Blocks", - "sub_path": "filament/Generic ASA @Blocks.json" + "name": "Blocks ASA @base", + "sub_path": "filament/Blocks ASA @base.json" }, { - "name": "Generic ASA-CF @Blocks", - "sub_path": "filament/Generic ASA-CF @Blocks.json" + "name": "Blocks ASA-CF @base", + "sub_path": "filament/Blocks ASA-CF @base.json" }, { - "name": "Generic PA @Blocks", - "sub_path": "filament/Generic PA @Blocks.json" + "name": "Blocks PA @base", + "sub_path": "filament/Blocks PA @base.json" }, { - "name": "Generic PA-CF @Blocks", - "sub_path": "filament/Generic PA-CF @Blocks.json" + "name": "Blocks PA-CF @base", + "sub_path": "filament/Blocks PA-CF @base.json" }, { - "name": "Generic PC @Blocks", - "sub_path": "filament/Generic PC @Blocks.json" + "name": "Blocks PC @base", + "sub_path": "filament/Blocks PC @base.json" }, { - "name": "Generic PETG @Blocks", - "sub_path": "filament/Generic PETG @Blocks.json" + "name": "Blocks PETG @base", + "sub_path": "filament/Blocks PETG @base.json" }, { - "name": "Generic PLA @Blocks", - "sub_path": "filament/Generic PLA @Blocks.json" + "name": "Blocks PLA @base", + "sub_path": "filament/Blocks PLA @base.json" }, { - "name": "Generic PLA-CF @Blocks", - "sub_path": "filament/Generic PLA-CF @Blocks.json" + "name": "Blocks PLA-CF @base", + "sub_path": "filament/Blocks PLA-CF @base.json" }, { - "name": "Generic PVA @Blocks", - "sub_path": "filament/Generic PVA @Blocks.json" + "name": "Blocks PVA @base", + "sub_path": "filament/Blocks PVA @base.json" }, { - "name": "Generic TPU @Blocks", - "sub_path": "filament/Generic TPU @Blocks.json" + "name": "Blocks TPU @base", + "sub_path": "filament/Blocks TPU @base.json" + }, + { + "name": "Blocks ABS @Blocks_RD50_V2", + "sub_path": "filament/Blocks ABS @Blocks_RD50_V2.json" + }, + { + "name": "Blocks ABS @Blocks_RF50", + "sub_path": "filament/Blocks ABS @Blocks_RF50.json" + }, + { + "name": "Blocks ASA @Blocks_RD50_V2", + "sub_path": "filament/Blocks ASA @Blocks_RD50_V2.json" + }, + { + "name": "Blocks ASA @Blocks_RF50", + "sub_path": "filament/Blocks ASA @Blocks_RF50.json" + }, + { + "name": "Blocks ASA-CF @Blocks_RD50_V2", + "sub_path": "filament/Blocks ASA-CF @Blocks_RD50_V2.json" + }, + { + "name": "Blocks ASA-CF @Blocks_RF50", + "sub_path": "filament/Blocks ASA-CF @Blocks_RF50.json" + }, + { + "name": "Blocks PA @Blocks_RD50_V2", + "sub_path": "filament/Blocks PA @Blocks_RD50_V2.json" + }, + { + "name": "Blocks PA @Blocks_RF50", + "sub_path": "filament/Blocks PA @Blocks_RF50.json" + }, + { + "name": "Blocks PA-CF @Blocks_RD50_V2", + "sub_path": "filament/Blocks PA-CF @Blocks_RD50_V2.json" + }, + { + "name": "Blocks PA-CF @Blocks_RF50", + "sub_path": "filament/Blocks PA-CF @Blocks_RF50.json" + }, + { + "name": "Blocks PC @Blocks_RD50_V2", + "sub_path": "filament/Blocks PC @Blocks_RD50_V2.json" + }, + { + "name": "Blocks PC @Blocks_RF50", + "sub_path": "filament/Blocks PC @Blocks_RF50.json" + }, + { + "name": "Blocks PETG @Blocks_Pro_S100", + "sub_path": "filament/Blocks PETG @Blocks_Pro_S100.json" + }, + { + "name": "Blocks PETG @Blocks_RD50_V2", + "sub_path": "filament/Blocks PETG @Blocks_RD50_V2.json" + }, + { + "name": "Blocks PETG @Blocks_RF50", + "sub_path": "filament/Blocks PETG @Blocks_RF50.json" + }, + { + "name": "Blocks PLA @Blocks_Pro_S100", + "sub_path": "filament/Blocks PLA @Blocks_Pro_S100.json" + }, + { + "name": "Blocks PLA @Blocks_RD50_V2", + "sub_path": "filament/Blocks PLA @Blocks_RD50_V2.json" + }, + { + "name": "Blocks PLA @Blocks_RF50", + "sub_path": "filament/Blocks PLA @Blocks_RF50.json" + }, + { + "name": "Blocks PLA-CF @Blocks_RD50_V2", + "sub_path": "filament/Blocks PLA-CF @Blocks_RD50_V2.json" + }, + { + "name": "Blocks PLA-CF @Blocks_RF50", + "sub_path": "filament/Blocks PLA-CF @Blocks_RF50.json" + }, + { + "name": "Blocks PVA @Blocks_RD50_V2", + "sub_path": "filament/Blocks PVA @Blocks_RD50_V2.json" + }, + { + "name": "Blocks PVA @Blocks_RF50", + "sub_path": "filament/Blocks PVA @Blocks_RF50.json" + }, + { + "name": "Blocks TPU @Blocks_Pro_S100", + "sub_path": "filament/Blocks TPU @Blocks_Pro_S100.json" + }, + { + "name": "Blocks TPU @Blocks_RD50_V2", + "sub_path": "filament/Blocks TPU @Blocks_RD50_V2.json" + }, + { + "name": "Blocks TPU @Blocks_RF50", + "sub_path": "filament/Blocks TPU @Blocks_RF50.json" } ], "machine_list": [ diff --git a/resources/profiles/Blocks/filament/Blocks ABS @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks ABS @Blocks_RD50_V2.json new file mode 100644 index 0000000000..5ce6d8bed6 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks ABS @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks ABS @Blocks_RD50_V2", + "renamed_from": "Blocks Generic ABS;Generic ABS @Blocks", + "inherits": "Blocks ABS @base", + "from": "system", + "setting_id": "qhQ0qQDGJgsueCAF", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks ABS @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks ABS @Blocks_RF50.json new file mode 100644 index 0000000000..3f418a8d6b --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks ABS @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks ABS @Blocks_RF50", + "inherits": "Blocks ABS @base", + "from": "system", + "setting_id": "bGYMFFdKiROKuSiY", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Generic ABS @Blocks.json b/resources/profiles/Blocks/filament/Blocks ABS @base.json similarity index 75% rename from resources/profiles/Blocks/filament/Generic ABS @Blocks.json rename to resources/profiles/Blocks/filament/Blocks ABS @base.json index c3d09cfd18..e475770f64 100644 --- a/resources/profiles/Blocks/filament/Generic ABS @Blocks.json +++ b/resources/profiles/Blocks/filament/Blocks ABS @base.json @@ -1,12 +1,13 @@ { "type": "filament", - "name": "Generic ABS @Blocks", + "name": "Blocks ABS @base", "inherits": "fdm_filament_abs", - "renamed_from": "Blocks Generic ABS", "from": "system", - "setting_id": "TL1Q1kA4t36GGObG", - "filament_id": "OFY9muEs", - "instantiation": "true", + "filament_id": "OFBBhiX8", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], "filament_flow_ratio": [ "0.95" ], @@ -81,13 +82,5 @@ ], "during_print_exhaust_fan_speed": [ "100" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" ] } diff --git a/resources/profiles/Blocks/filament/Blocks ASA @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks ASA @Blocks_RD50_V2.json new file mode 100644 index 0000000000..99671f2d3d --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks ASA @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks ASA @Blocks_RD50_V2", + "renamed_from": "Blocks Generic ASA;Generic ASA @Blocks", + "inherits": "Blocks ASA @base", + "from": "system", + "setting_id": "HW7xDXThvpVFbMq5", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks ASA @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks ASA @Blocks_RF50.json new file mode 100644 index 0000000000..603c2d7dfa --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks ASA @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks ASA @Blocks_RF50", + "inherits": "Blocks ASA @base", + "from": "system", + "setting_id": "lBW7SCsvawi4icNU", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Generic ASA @Blocks.json b/resources/profiles/Blocks/filament/Blocks ASA @base.json similarity index 75% rename from resources/profiles/Blocks/filament/Generic ASA @Blocks.json rename to resources/profiles/Blocks/filament/Blocks ASA @base.json index 0c1ee32085..8fed35b779 100644 --- a/resources/profiles/Blocks/filament/Generic ASA @Blocks.json +++ b/resources/profiles/Blocks/filament/Blocks ASA @base.json @@ -1,12 +1,13 @@ { "type": "filament", - "name": "Generic ASA @Blocks", + "name": "Blocks ASA @base", "inherits": "fdm_filament_asa", - "renamed_from": "Blocks Generic ASA", "from": "system", - "setting_id": "xP7cB4RHgbm4cYDD", - "filament_id": "OFLPAxz3", - "instantiation": "true", + "filament_id": "OFTz2YXa", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], "filament_flow_ratio": [ "0.95" ], @@ -81,13 +82,5 @@ ], "during_print_exhaust_fan_speed": [ "100" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" ] } diff --git a/resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RD50_V2.json new file mode 100644 index 0000000000..83929ad9b2 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks ASA-CF @Blocks_RD50_V2", + "renamed_from": "Blocks Generic ASA-CF;Generic ASA-CF @Blocks", + "inherits": "Blocks ASA-CF @base", + "from": "system", + "setting_id": "x5ksnGLGGy1PgDns", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RF50.json new file mode 100644 index 0000000000..1304f52400 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks ASA-CF @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks ASA-CF @Blocks_RF50", + "inherits": "Blocks ASA-CF @base", + "from": "system", + "setting_id": "pcbd5qFiMZAvDPg1", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Generic ASA-CF @Blocks.json b/resources/profiles/Blocks/filament/Blocks ASA-CF @base.json similarity index 75% rename from resources/profiles/Blocks/filament/Generic ASA-CF @Blocks.json rename to resources/profiles/Blocks/filament/Blocks ASA-CF @base.json index 0d9f0aa862..fb1cdeb998 100644 --- a/resources/profiles/Blocks/filament/Generic ASA-CF @Blocks.json +++ b/resources/profiles/Blocks/filament/Blocks ASA-CF @base.json @@ -1,12 +1,13 @@ { "type": "filament", - "name": "Generic ASA-CF @Blocks", + "name": "Blocks ASA-CF @base", "inherits": "fdm_filament_asa", - "renamed_from": "Blocks Generic ASA-CF", "from": "system", - "setting_id": "ju4ue7yJoz3ujny6", - "filament_id": "OF53eLVD", - "instantiation": "true", + "filament_id": "OF8b9I7o", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], "filament_type": [ "ASA-CF" ], @@ -84,13 +85,5 @@ ], "during_print_exhaust_fan_speed": [ "100" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" ] } diff --git a/resources/profiles/Blocks/filament/Blocks PA @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks PA @Blocks_RD50_V2.json new file mode 100644 index 0000000000..f3b3e9e2ac --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PA @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks PA @Blocks_RD50_V2", + "renamed_from": "Blocks Generic PA;Generic PA @Blocks", + "inherits": "Blocks PA @base", + "from": "system", + "setting_id": "gxD81n2jjrReLD29", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PA @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks PA @Blocks_RF50.json new file mode 100644 index 0000000000..6b11df1a22 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PA @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PA @Blocks_RF50", + "inherits": "Blocks PA @base", + "from": "system", + "setting_id": "PzKxRMDnQUzVWRer", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PA @base.json b/resources/profiles/Blocks/filament/Blocks PA @base.json new file mode 100644 index 0000000000..ff6ca4b599 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PA @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Blocks PA @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFidOgK4", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "10" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RD50_V2.json new file mode 100644 index 0000000000..174ffbab6d --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks PA-CF @Blocks_RD50_V2", + "renamed_from": "Blocks Generic PA-CF;Generic PA-CF @Blocks", + "inherits": "Blocks PA-CF @base", + "from": "system", + "setting_id": "EtbeKx3rbhUo1TtM", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RF50.json new file mode 100644 index 0000000000..1b1e02f58e --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PA-CF @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PA-CF @Blocks_RF50", + "inherits": "Blocks PA-CF @base", + "from": "system", + "setting_id": "udI8Q4X7HaPIaPt4", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Generic PA-CF @Blocks.json b/resources/profiles/Blocks/filament/Blocks PA-CF @base.json similarity index 76% rename from resources/profiles/Blocks/filament/Generic PA-CF @Blocks.json rename to resources/profiles/Blocks/filament/Blocks PA-CF @base.json index 7ec957f6d1..360a090042 100644 --- a/resources/profiles/Blocks/filament/Generic PA-CF @Blocks.json +++ b/resources/profiles/Blocks/filament/Blocks PA-CF @base.json @@ -1,12 +1,13 @@ { "type": "filament", - "name": "Generic PA-CF @Blocks", + "name": "Blocks PA-CF @base", "inherits": "fdm_filament_pa", - "renamed_from": "Blocks Generic PA-CF", "from": "system", - "setting_id": "T6SO0WRdnG6wcyG8", - "filament_id": "OFQLcbps", - "instantiation": "true", + "filament_id": "OFdWrXpL", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], "filament_type": [ "PA-CF" ], @@ -87,13 +88,5 @@ ], "during_print_exhaust_fan_speed": [ "80" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" ] } diff --git a/resources/profiles/Blocks/filament/Blocks PC @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks PC @Blocks_RD50_V2.json new file mode 100644 index 0000000000..4fe1758a1d --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PC @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks PC @Blocks_RD50_V2", + "renamed_from": "Blocks Generic PC;Generic PC @Blocks", + "inherits": "Blocks PC @base", + "from": "system", + "setting_id": "HLc0shWnKwJzSFyW", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PC @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks PC @Blocks_RF50.json new file mode 100644 index 0000000000..ad23b4ba03 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PC @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PC @Blocks_RF50", + "inherits": "Blocks PC @base", + "from": "system", + "setting_id": "9a6bccZopMTeNHYu", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PC @base.json b/resources/profiles/Blocks/filament/Blocks PC @base.json new file mode 100644 index 0000000000..83b3d75300 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PC @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Blocks PC @base", + "inherits": "fdm_filament_pc", + "from": "system", + "filament_id": "OFlGY0MN", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_max_volumetric_speed": [ + "10" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PETG @Blocks_Pro_S100.json b/resources/profiles/Blocks/filament/Blocks PETG @Blocks_Pro_S100.json new file mode 100644 index 0000000000..8dab9e61d2 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PETG @Blocks_Pro_S100.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Blocks PETG @Blocks_Pro_S100", + "renamed_from": "Blocks Generic PETG;Generic PETG @Blocks", + "inherits": "Blocks PETG @base", + "from": "system", + "setting_id": "AhMR49fcFqtrQ6hI", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS Pro S100 0.4 nozzle", + "BLOCKS Pro S100 0.6 nozzle", + "BLOCKS Pro S100 0.8 nozzle", + "BLOCKS Pro S100 1.0 nozzle", + "BLOCKS Pro S100 1.2 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PETG @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks PETG @Blocks_RD50_V2.json new file mode 100644 index 0000000000..e48e2d8145 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PETG @Blocks_RD50_V2.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PETG @Blocks_RD50_V2", + "inherits": "Blocks PETG @base", + "from": "system", + "setting_id": "3v7ah1zVG8MERPSJ", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PETG @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks PETG @Blocks_RF50.json new file mode 100644 index 0000000000..c810cf0e8f --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PETG @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PETG @Blocks_RF50", + "inherits": "Blocks PETG @base", + "from": "system", + "setting_id": "S7weR19wo9meJ6Yz", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Generic PETG @Blocks.json b/resources/profiles/Blocks/filament/Blocks PETG @base.json similarity index 68% rename from resources/profiles/Blocks/filament/Generic PETG @Blocks.json rename to resources/profiles/Blocks/filament/Blocks PETG @base.json index 45a2a13e9b..f272fa9049 100644 --- a/resources/profiles/Blocks/filament/Generic PETG @Blocks.json +++ b/resources/profiles/Blocks/filament/Blocks PETG @base.json @@ -1,12 +1,13 @@ { "type": "filament", - "name": "Generic PETG @Blocks", + "name": "Blocks PETG @base", "inherits": "fdm_filament_petg", - "renamed_from": "Blocks Generic PETG", "from": "system", - "setting_id": "NgzPlYItKHbmGgv3", - "filament_id": "OFYPdQJh", - "instantiation": "true", + "filament_id": "OF9t1Ga0", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], "filament_flow_ratio": [ "0.94" ], @@ -81,18 +82,5 @@ ], "slow_down_layer_time": [ "5" - ], - "compatible_printers": [ - "BLOCKS Pro S100 0.4 nozzle", - "BLOCKS Pro S100 0.6 nozzle", - "BLOCKS Pro S100 0.8 nozzle", - "BLOCKS Pro S100 1.0 nozzle", - "BLOCKS Pro S100 1.2 nozzle", - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" ] } diff --git a/resources/profiles/Blocks/filament/Blocks PLA @Blocks_Pro_S100.json b/resources/profiles/Blocks/filament/Blocks PLA @Blocks_Pro_S100.json new file mode 100644 index 0000000000..d68c94d143 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PLA @Blocks_Pro_S100.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Blocks PLA @Blocks_Pro_S100", + "renamed_from": "Blocks Generic PLA;Generic PLA @Blocks", + "inherits": "Blocks PLA @base", + "from": "system", + "setting_id": "vWojuLYIfduLGFLL", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS Pro S100 0.4 nozzle", + "BLOCKS Pro S100 0.6 nozzle", + "BLOCKS Pro S100 0.8 nozzle", + "BLOCKS Pro S100 1.0 nozzle", + "BLOCKS Pro S100 1.2 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PLA @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks PLA @Blocks_RD50_V2.json new file mode 100644 index 0000000000..ac283bbe06 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PLA @Blocks_RD50_V2.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PLA @Blocks_RD50_V2", + "inherits": "Blocks PLA @base", + "from": "system", + "setting_id": "y7y8NcXNdp17sJUs", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PLA @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks PLA @Blocks_RF50.json new file mode 100644 index 0000000000..c59a35df74 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PLA @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PLA @Blocks_RF50", + "inherits": "Blocks PLA @base", + "from": "system", + "setting_id": "jt1MJF4eZzkkscEJ", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json b/resources/profiles/Blocks/filament/Blocks PLA @base.json similarity index 56% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json rename to resources/profiles/Blocks/filament/Blocks PLA @base.json index c8ef69cf88..c4051967af 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @base.json +++ b/resources/profiles/Blocks/filament/Blocks PLA @base.json @@ -1,41 +1,44 @@ { "type": "filament", - "name": "Panchroma PLA Satin @base", + "name": "Blocks PLA @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "OFPkCJKE", + "filament_id": "OFVGAC8g", "instantiation": "false", - "filament_cost": [ - "20.99" - ], - "filament_density": [ - "1.24" + "filament_vendor": [ + "Blocks" ], "filament_flow_ratio": [ "0.95" ], "filament_max_volumetric_speed": [ - "16" - ], - "filament_vendor": [ - "Polymaker" - ], - "nozzle_temperature": [ - "230" + "18" ], "nozzle_temperature_initial_layer": [ - "230" + "210" ], - "nozzle_temperature_range_high": [ - "240" + "nozzle_temperature": [ + "210" ], "nozzle_temperature_range_low": [ "190" ], - "slow_down_layer_time": [ - "5" + "nozzle_temperature_range_high": [ + "230" ], - "temperature_vitrification": [ - "59" + "slow_down_min_speed": [ + "30" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "80" + ], + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "100" ] } diff --git a/resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RD50_V2.json new file mode 100644 index 0000000000..690779dfdb --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks PLA-CF @Blocks_RD50_V2", + "renamed_from": "Blocks Generic PLA-CF;Generic PLA-CF @Blocks", + "inherits": "Blocks PLA-CF @base", + "from": "system", + "setting_id": "lhBtMKP1DmOB3HOI", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RF50.json new file mode 100644 index 0000000000..1f27f49fdf --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PLA-CF @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PLA-CF @Blocks_RF50", + "inherits": "Blocks PLA-CF @base", + "from": "system", + "setting_id": "6CU83mAyhcZ4FCPI", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @base.json b/resources/profiles/Blocks/filament/Blocks PLA-CF @base.json similarity index 64% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Speed @base.json rename to resources/profiles/Blocks/filament/Blocks PLA-CF @base.json index 7b93695099..989a427df4 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @base.json +++ b/resources/profiles/Blocks/filament/Blocks PLA-CF @base.json @@ -1,20 +1,23 @@ { "type": "filament", - "name": "BETA PLA High Speed @base", + "name": "Blocks PLA-CF @base", "inherits": "fdm_filament_pla", "from": "system", - "filament_id": "OF3PDEw3", + "filament_id": "OF6FfwOP", "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], "filament_flow_ratio": [ - "0.98" + "0.95" ], "filament_max_volumetric_speed": [ - "18" + "20" + ], + "filament_type": [ + "PLA-CF" ], "slow_down_layer_time": [ - "8" - ], - "filament_vendor": [ - "BETA" + "7" ] } diff --git a/resources/profiles/Blocks/filament/Blocks PVA @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks PVA @Blocks_RD50_V2.json new file mode 100644 index 0000000000..c000e8bc7d --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PVA @Blocks_RD50_V2.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Blocks PVA @Blocks_RD50_V2", + "renamed_from": "Blocks Generic PVA;Generic PVA @Blocks", + "inherits": "Blocks PVA @base", + "from": "system", + "setting_id": "hREDqwKF6qyKkakp", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PVA @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks PVA @Blocks_RF50.json new file mode 100644 index 0000000000..91a0a0e5e6 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PVA @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks PVA @Blocks_RF50", + "inherits": "Blocks PVA @base", + "from": "system", + "setting_id": "q6pKqHY7Iz4OZaAC", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks PVA @base.json b/resources/profiles/Blocks/filament/Blocks PVA @base.json new file mode 100644 index 0000000000..326e61b362 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks PVA @base.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Blocks PVA @base", + "inherits": "fdm_filament_pva", + "from": "system", + "filament_id": "OFqcNuE1", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks TPU @Blocks_Pro_S100.json b/resources/profiles/Blocks/filament/Blocks TPU @Blocks_Pro_S100.json new file mode 100644 index 0000000000..c397c06bb6 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks TPU @Blocks_Pro_S100.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Blocks TPU @Blocks_Pro_S100", + "renamed_from": "Blocks Generic TPU;Generic TPU @Blocks", + "inherits": "Blocks TPU @base", + "from": "system", + "setting_id": "6Rkz2je91JRTRoTi", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS Pro S100 0.4 nozzle", + "BLOCKS Pro S100 0.6 nozzle", + "BLOCKS Pro S100 0.8 nozzle", + "BLOCKS Pro S100 1.0 nozzle", + "BLOCKS Pro S100 1.2 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks TPU @Blocks_RD50_V2.json b/resources/profiles/Blocks/filament/Blocks TPU @Blocks_RD50_V2.json new file mode 100644 index 0000000000..088ad69bbb --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks TPU @Blocks_RD50_V2.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks TPU @Blocks_RD50_V2", + "inherits": "Blocks TPU @base", + "from": "system", + "setting_id": "mkCqRQTtXldzoEUg", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RD50 V2 0.4 nozzle", + "BLOCKS RD50 V2 0.6 nozzle", + "BLOCKS RD50 V2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Blocks TPU @Blocks_RF50.json b/resources/profiles/Blocks/filament/Blocks TPU @Blocks_RF50.json new file mode 100644 index 0000000000..53773dd813 --- /dev/null +++ b/resources/profiles/Blocks/filament/Blocks TPU @Blocks_RF50.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Blocks TPU @Blocks_RF50", + "inherits": "Blocks TPU @base", + "from": "system", + "setting_id": "bCCvu5Ow1JkwIrRR", + "instantiation": "true", + "compatible_printers": [ + "BLOCKS RF50 0.4 nozzle", + "BLOCKS RF50 0.6 nozzle", + "BLOCKS RF50 0.8 nozzle" + ] +} diff --git a/resources/profiles/Blocks/filament/Generic TPU @Blocks.json b/resources/profiles/Blocks/filament/Blocks TPU @base.json similarity index 58% rename from resources/profiles/Blocks/filament/Generic TPU @Blocks.json rename to resources/profiles/Blocks/filament/Blocks TPU @base.json index 8b5873a745..9b26d57636 100644 --- a/resources/profiles/Blocks/filament/Generic TPU @Blocks.json +++ b/resources/profiles/Blocks/filament/Blocks TPU @base.json @@ -1,12 +1,13 @@ { "type": "filament", - "name": "Generic TPU @Blocks", + "name": "Blocks TPU @base", "inherits": "fdm_filament_tpu", - "renamed_from": "Blocks Generic TPU", "from": "system", - "setting_id": "6iVYOCZo8ugs4JA0", - "filament_id": "OFgbpcy9", - "instantiation": "true", + "filament_id": "OFYnedOZ", + "instantiation": "false", + "filament_vendor": [ + "Blocks" + ], "filament_max_volumetric_speed": [ "4" ], @@ -54,18 +55,5 @@ ], "during_print_exhaust_fan_speed": [ "80" - ], - "compatible_printers": [ - "BLOCKS Pro S100 0.4 nozzle", - "BLOCKS Pro S100 0.6 nozzle", - "BLOCKS Pro S100 0.8 nozzle", - "BLOCKS Pro S100 1.0 nozzle", - "BLOCKS Pro S100 1.2 nozzle", - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" ] } diff --git a/resources/profiles/Blocks/filament/Generic PA @Blocks.json b/resources/profiles/Blocks/filament/Generic PA @Blocks.json deleted file mode 100644 index e624226ded..0000000000 --- a/resources/profiles/Blocks/filament/Generic PA @Blocks.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PA @Blocks", - "inherits": "fdm_filament_pa", - "renamed_from": "Blocks Generic PA", - "from": "system", - "setting_id": "hL3p8gAeciwDkjNK", - "filament_id": "OFg8ndtj", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" - ] -} diff --git a/resources/profiles/Blocks/filament/Generic PC @Blocks.json b/resources/profiles/Blocks/filament/Generic PC @Blocks.json deleted file mode 100644 index 7b5df77bc5..0000000000 --- a/resources/profiles/Blocks/filament/Generic PC @Blocks.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PC @Blocks", - "inherits": "fdm_filament_pc", - "renamed_from": "Blocks Generic PC", - "from": "system", - "setting_id": "Xhs8PjtmwwVj0ksE", - "filament_id": "OFLakOUI", - "instantiation": "true", - "filament_flow_ratio": [ - "0.94" - ], - "filament_max_volumetric_speed": [ - "10" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" - ] -} diff --git a/resources/profiles/Blocks/filament/Generic PLA @Blocks.json b/resources/profiles/Blocks/filament/Generic PLA @Blocks.json deleted file mode 100644 index 3a5c942899..0000000000 --- a/resources/profiles/Blocks/filament/Generic PLA @Blocks.json +++ /dev/null @@ -1,56 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA @Blocks", - "inherits": "fdm_filament_pla", - "renamed_from": "Blocks Generic PLA", - "from": "system", - "setting_id": "kjhuttx4T8OtTNmV", - "filament_id": "OFDSrzZ8", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "230" - ], - "slow_down_min_speed": [ - "30" - ], - "additional_cooling_fan_speed": [ - "100" - ], - "complete_print_exhaust_fan_speed": [ - "80" - ], - "activate_air_filtration": [ - "1" - ], - "during_print_exhaust_fan_speed": [ - "100" - ], - "compatible_printers": [ - "BLOCKS Pro S100 0.4 nozzle", - "BLOCKS Pro S100 0.6 nozzle", - "BLOCKS Pro S100 0.8 nozzle", - "BLOCKS Pro S100 1.0 nozzle", - "BLOCKS Pro S100 1.2 nozzle", - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" - ] -} diff --git a/resources/profiles/Blocks/filament/Generic PLA-CF @Blocks.json b/resources/profiles/Blocks/filament/Generic PLA-CF @Blocks.json deleted file mode 100644 index 3a3ac5daba..0000000000 --- a/resources/profiles/Blocks/filament/Generic PLA-CF @Blocks.json +++ /dev/null @@ -1,30 +0,0 @@ -{ - "type": "filament", - "name": "Generic PLA-CF @Blocks", - "inherits": "fdm_filament_pla", - "renamed_from": "Blocks Generic PLA-CF", - "from": "system", - "setting_id": "oKUqzwAWMrpiyGLf", - "filament_id": "OFWbdGsC", - "instantiation": "true", - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_type": [ - "PLA-CF" - ], - "slow_down_layer_time": [ - "7" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" - ] -} diff --git a/resources/profiles/Blocks/filament/Generic PVA @Blocks.json b/resources/profiles/Blocks/filament/Generic PVA @Blocks.json deleted file mode 100644 index 5b6a3ad368..0000000000 --- a/resources/profiles/Blocks/filament/Generic PVA @Blocks.json +++ /dev/null @@ -1,24 +0,0 @@ -{ - "type": "filament", - "name": "Generic PVA @Blocks", - "inherits": "fdm_filament_pva", - "renamed_from": "Blocks Generic PVA", - "from": "system", - "setting_id": "tNw3oe7VovLkgUbB", - "filament_id": "OFDvXujf", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "compatible_printers": [ - "BLOCKS RD50 V2 0.4 nozzle", - "BLOCKS RD50 V2 0.6 nozzle", - "BLOCKS RD50 V2 0.8 nozzle", - "BLOCKS RF50 0.4 nozzle", - "BLOCKS RF50 0.6 nozzle", - "BLOCKS RF50 0.8 nozzle" - ] -} diff --git a/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.4 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.4 nozzle.json index e8cc1893c7..43951cf9c5 100644 --- a/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.4 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.4 nozzle.json @@ -6,7 +6,7 @@ "setting_id": "G7HQgaspHXduDM8O", "instantiation": "true", "printer_model": "BLOCKS Pro S100", - "default_print_profile": "0.20mm Standard 0.4 nozzle @Blocks", + "default_print_profile": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100", "max_layer_height": [ "0.30" ], @@ -25,5 +25,8 @@ "printable_height": "900", "upward_compatible_machine": [ "BLOCKS Pro S100" + ], + "default_filament_profile": [ + "Blocks PLA @Blocks_Pro_S100" ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.6 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.6 nozzle.json index 49e519d2ec..a55153bab7 100644 --- a/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.6 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.6 nozzle.json @@ -6,7 +6,7 @@ "setting_id": "XkWdS210oUMQN17N", "instantiation": "true", "printer_model": "BLOCKS Pro S100", - "default_print_profile": "0.30mm Standard 0.6 nozzle @Blocks", + "default_print_profile": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100", "max_layer_height": [ "0.50" ], @@ -26,5 +26,8 @@ "upward_compatible_machine": [ "BLOCKS Pro S100" ], - "printer_variant": "0.6" + "printer_variant": "0.6", + "default_filament_profile": [ + "Blocks PLA @Blocks_Pro_S100" + ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.8 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.8 nozzle.json index 3c3a29f111..7e889bbf14 100644 --- a/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.8 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS Pro S100 0.8 nozzle.json @@ -6,7 +6,7 @@ "setting_id": "I6PdeCS7SbvIlkZf", "instantiation": "true", "printer_model": "BLOCKS Pro S100", - "default_print_profile": "0.40mm Standard 0.8 nozzle @Blocks", + "default_print_profile": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100", "max_layer_height": [ "0.56" ], @@ -26,5 +26,8 @@ "upward_compatible_machine": [ "BLOCKS Pro S100" ], - "printer_variant": "0.8" + "printer_variant": "0.8", + "default_filament_profile": [ + "Blocks PLA @Blocks_Pro_S100" + ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.0 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.0 nozzle.json index 1be375c34b..c84ad8c227 100644 --- a/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.0 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.0 nozzle.json @@ -6,7 +6,7 @@ "setting_id": "elLdUyy9RhUoa37o", "instantiation": "true", "printer_model": "BLOCKS Pro S100", - "default_print_profile": "0.50mm Standard 1.0 nozzle @Blocks", + "default_print_profile": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100", "max_layer_height": [ "0.7" ], @@ -26,5 +26,8 @@ "upward_compatible_machine": [ "BLOCKS Pro S100" ], - "printer_variant": "1.0" + "printer_variant": "1.0", + "default_filament_profile": [ + "Blocks PLA @Blocks_Pro_S100" + ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.2 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.2 nozzle.json index 426fdafd55..11aab094cf 100644 --- a/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.2 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS Pro S100 1.2 nozzle.json @@ -6,7 +6,7 @@ "setting_id": "xtsGSJ4JkbHTPi44", "instantiation": "true", "printer_model": "BLOCKS Pro S100", - "default_print_profile": "0.60mm Standard 1.2 nozzle @Blocks", + "default_print_profile": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100", "max_layer_height": [ "0.8" ], @@ -26,5 +26,8 @@ "upward_compatible_machine": [ "BLOCKS Pro S100" ], - "printer_variant": "1.2" + "printer_variant": "1.2", + "default_filament_profile": [ + "Blocks PLA @Blocks_Pro_S100" + ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS Pro S100.json b/resources/profiles/Blocks/machine/BLOCKS Pro S100.json index de9ea3756c..e034ffd9b1 100644 --- a/resources/profiles/Blocks/machine/BLOCKS Pro S100.json +++ b/resources/profiles/Blocks/machine/BLOCKS Pro S100.json @@ -8,5 +8,5 @@ "bed_model": "PRO S100 HotBed model.stl", "bed_texture": "PRO S100 HotBed texture.svg", "hotend_model": "BLOCKS PrintCore.stl", - "default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks" + "default_materials": "Blocks PLA @Blocks_Pro_S100;Blocks PETG @Blocks_Pro_S100;Blocks TPU @Blocks_Pro_S100" } diff --git a/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.4 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.4 nozzle.json index 3d2908a403..c5613b39ec 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.4 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.4 nozzle.json @@ -34,5 +34,9 @@ "printable_height": "500", "upward_compatible_machine": [ "BLOCKS RD50 V2" + ], + "printer_variant": "0.4", + "default_filament_profile": [ + "Blocks PLA @Blocks_RD50_V2" ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.6 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.6 nozzle.json index bf41f1070f..92cde6244c 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.6 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.6 nozzle.json @@ -35,5 +35,8 @@ "deretraction_speed": [ "80" ], - "printer_variant": "0.6" + "printer_variant": "0.6", + "default_filament_profile": [ + "Blocks PLA @Blocks_RD50_V2" + ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.8 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.8 nozzle.json index 23c0808be2..756e77efb7 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.8 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS RD50 V2 0.8 nozzle.json @@ -35,5 +35,8 @@ "deretraction_speed": [ "80" ], - "printer_variant": "0.8" + "printer_variant": "0.8", + "default_filament_profile": [ + "Blocks PLA @Blocks_RD50_V2" + ] } diff --git a/resources/profiles/Blocks/machine/BLOCKS RD50 V2.json b/resources/profiles/Blocks/machine/BLOCKS RD50 V2.json index 76dafd429e..1cc75448ac 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RD50 V2.json +++ b/resources/profiles/Blocks/machine/BLOCKS RD50 V2.json @@ -8,5 +8,5 @@ "bed_model": "RD50 V2 HotBed model.stl", "bed_texture": "RD50 V2 HotBed texture.svg", "hotend_model": "BLOCKS PrintCore.stl", - "default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks" + "default_materials": "Blocks PLA @Blocks_RD50_V2;Blocks PETG @Blocks_RD50_V2;Blocks TPU @Blocks_RD50_V2" } diff --git a/resources/profiles/Blocks/machine/BLOCKS RF50 0.4 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS RF50 0.4 nozzle.json index a589b6620b..00954cc1c3 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RF50 0.4 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS RF50 0.4 nozzle.json @@ -39,19 +39,23 @@ "20000" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "12", "12" ], "retraction_length": [ - "1" + "1.2" ], "retraction_speed": [ "60" @@ -79,5 +83,10 @@ ], "retract_before_wipe": [ "0" - ] + ], + "default_filament_profile": [ + "Blocks PLA @Blocks_RF50" + ], + "support_multi_bed_types": "1", + "default_bed_type": "Textured PEI Plate" } diff --git a/resources/profiles/Blocks/machine/BLOCKS RF50 0.6 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS RF50 0.6 nozzle.json index fea3007abc..930d7591f3 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RF50 0.6 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS RF50 0.6 nozzle.json @@ -39,19 +39,23 @@ "20000" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "12", "12" ], "retraction_length": [ - "1" + "1.2" ], "retraction_speed": [ "60" @@ -75,8 +79,8 @@ "BLOCKS RF50" ], "machine_start_gcode": [ - "PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer]", - "SET_PRESSURE_ADVANCE ADVANCE=0.046" + "PRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer]\n", + "SET_PRESSURE_ADVANCE ADVANCE=0.046\n" ], "printer_variant": "0.6", "wipe_distance": [ @@ -84,5 +88,10 @@ ], "retract_before_wipe": [ "0" - ] + ], + "default_filament_profile": [ + "Blocks PLA @Blocks_RF50" + ], + "support_multi_bed_types": "1", + "default_bed_type": "Textured PEI Plate" } diff --git a/resources/profiles/Blocks/machine/BLOCKS RF50 0.8 nozzle.json b/resources/profiles/Blocks/machine/BLOCKS RF50 0.8 nozzle.json index c8d6cec882..dc1b704a9e 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RF50 0.8 nozzle.json +++ b/resources/profiles/Blocks/machine/BLOCKS RF50 0.8 nozzle.json @@ -39,19 +39,23 @@ "20000" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "12", "12" ], "retraction_length": [ - "1" + "1.2" ], "retraction_speed": [ "60" @@ -80,5 +84,10 @@ ], "retract_before_wipe": [ "0" - ] + ], + "default_filament_profile": [ + "Blocks PLA @Blocks_RF50" + ], + "support_multi_bed_types": "1", + "default_bed_type": "Textured PEI Plate" } diff --git a/resources/profiles/Blocks/machine/BLOCKS RF50.json b/resources/profiles/Blocks/machine/BLOCKS RF50.json index 14ae8bc5f4..79aeec9ebc 100644 --- a/resources/profiles/Blocks/machine/BLOCKS RF50.json +++ b/resources/profiles/Blocks/machine/BLOCKS RF50.json @@ -8,5 +8,6 @@ "bed_model": "RF50 HotBed model.stl", "bed_texture": "RF50 HotBed texture.svg", "hotend_model": "BLOCKS PrintCore.stl", - "default_materials": "Generic PLA @Blocks;Generic PETG @Blocks;Generic TPU @Blocks" + "default_materials": "Blocks PLA @Blocks_RF50;Blocks PETG @Blocks_RF50;Blocks TPU @Blocks_RF50", + "not_support_bed_type": "Smooth Cool Plate;Engineering Plate;Textured Cool Plate;Cool Plate (SuperTack)" } diff --git a/resources/profiles/Blocks/machine/fdm_klipper_common.json b/resources/profiles/Blocks/machine/fdm_klipper_common.json index 5372b42547..eab501bf4b 100644 --- a/resources/profiles/Blocks/machine/fdm_klipper_common.json +++ b/resources/profiles/Blocks/machine/fdm_klipper_common.json @@ -123,9 +123,6 @@ "wipe": [ "1" ], - "default_filament_profile": [ - "Generic PLA @Blocks" - ], "bed_exclude_area": [ "0x0" ], diff --git a/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json index 315256dcab..43474f76c1 100644 --- a/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.12mm Fine 0.4 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json index ca6facb720..b7351a4996 100644 --- a/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.16mm Optimal 0.4 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json index b80b051a71..aa2b2c8e4a 100644 --- a/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.20mm Optimal 0.6 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_Pro_S100.json index 9f66196279..8b7704a63a 100644 --- a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.20mm Standard 0.4 nozzle @Blocks", + "name": "0.20mm Standard 0.4 nozzle @Blocks_Pro_S100", + "renamed_from": "0.20mm Standard 0.4 nozzle @Blocks", "inherits": "fdm_process_blocks_common", "from": "system", - "setting_id": "47aDtVL6E5DVr7Mt", + "setting_id": "QSEguMMChNFZsK5H", "instantiation": "true", "layer_height": "0.2", "bottom_shell_layers": "4", diff --git a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json index 5c88e00c2a..901f3f811d 100644 --- a/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.20mm Standard 0.4 nozzle @Blocks_RF50.json @@ -25,7 +25,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -61,5 +61,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_Pro_S100.json similarity index 64% rename from resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_Pro_S100.json index 2bc124f2dc..2bf1bc9b85 100644 --- a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.24mm Draft 0.4 nozzle @Blocks", + "name": "0.24mm Draft 0.4 nozzle @Blocks_Pro_S100", + "renamed_from": "0.24mm Draft 0.4 nozzle @Blocks", "inherits": "fdm_process_blocks_common", "from": "system", - "setting_id": "ETADjxV6ViJQdnHA", + "setting_id": "uALfEFHGmup6vBYI", "instantiation": "true", "layer_height": "0.24", "bottom_shell_layers": "4", diff --git a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json index edb1bfcc2d..ab911910b9 100644 --- a/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.24mm Draft 0.4 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json index d2f853b638..739b4f7168 100644 --- a/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.26mm Standard 0.6 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json index dd6b60d371..7c9a108287 100644 --- a/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.28mm Extra Draft 0.4 nozzle @Blocks_RF50.json @@ -22,7 +22,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100.json similarity index 62% rename from resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100.json index 0cef66fb5a..eb2adc5e66 100644 --- a/resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.30mm Extra Draft 0.4 nozzle @Blocks", + "name": "0.30mm Extra Draft 0.4 nozzle @Blocks_Pro_S100", + "renamed_from": "0.30mm Extra Draft 0.4 nozzle @Blocks", "inherits": "fdm_process_blocks_common", "from": "system", - "setting_id": "UbuICsmppKDsaaZ4", + "setting_id": "HYKF5l2OGvpugSQy", "instantiation": "true", "bottom_shell_layers": "3", "top_shell_layers": "4", diff --git a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100.json index bbb74c97a9..43c66f8978 100644 --- a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.30mm Optimal 0.8 nozzle @Blocks", + "name": "0.30mm Optimal 0.8 nozzle @Blocks_Pro_S100", + "renamed_from": "0.30mm Optimal 0.8 nozzle @Blocks", "inherits": "fdm_process_common 0.8 nozzle", "from": "system", - "setting_id": "YqkYzp5zdH4R5upm", + "setting_id": "OUfZvizM5MGnvHfp", "instantiation": "true", "bottom_shell_layers": "3", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json index 9d909c1dd4..f6763c9494 100644 --- a/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.30mm Optimal 0.8 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100.json index 8820018b9d..be8a15f243 100644 --- a/resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.30mm Optimal 1.0 nozzle @Blocks", + "name": "0.30mm Optimal 1.0 nozzle @Blocks_Pro_S100", + "renamed_from": "0.30mm Optimal 1.0 nozzle @Blocks", "inherits": "fdm_process_common 1.0 nozzle", "from": "system", - "setting_id": "8pBawPScHkyQu0SW", + "setting_id": "HGG9WxKVr89qNFDx", "instantiation": "true", "bottom_shell_layers": "4", "top_shell_layers": "4", diff --git a/resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks_Pro_S100.json index d2a815e849..bdcc3d2f22 100644 --- a/resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.30mm Standard 0.6 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.30mm Standard 0.6 nozzle @Blocks", + "name": "0.30mm Standard 0.6 nozzle @Blocks_Pro_S100", + "renamed_from": "0.30mm Standard 0.6 nozzle @Blocks", "inherits": "fdm_process_common 0.6 nozzle", "from": "system", - "setting_id": "EPI3PAVK9LpJOZWO", + "setting_id": "gO2I1YjBl4nf8yzr", "instantiation": "true", "bottom_shell_layers": "3", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json index 60c6eae19e..b19346e30a 100644 --- a/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.32mm Draft 0.6 nozzle @Blocks_RF50.json @@ -22,7 +22,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json index f28a975208..12922fa105 100644 --- a/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.38mm Extra Draft 0.6 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json index 7b94febc1c..5c2245f114 100644 --- a/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.38mm Standard 0.8 nozzle @Blocks_RF50.json @@ -22,7 +22,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks_Pro_S100.json similarity index 64% rename from resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks_Pro_S100.json index 45fdd61179..6613c55d57 100644 --- a/resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.40mm Draft 0.6 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.40mm Draft 0.6 nozzle @Blocks", + "name": "0.40mm Draft 0.6 nozzle @Blocks_Pro_S100", + "renamed_from": "0.40mm Draft 0.6 nozzle @Blocks", "inherits": "fdm_process_common 0.6 nozzle", "from": "system", - "setting_id": "CShVKoGspbMJNPw8", + "setting_id": "OjsLUl1heqv1cevs", "instantiation": "true", "bottom_shell_layers": "2", "top_shell_layers": "2", diff --git a/resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks_Pro_S100.json index 177b620e51..ae0a24b261 100644 --- a/resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.40mm Standard 0.8 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.40mm Standard 0.8 nozzle @Blocks", + "name": "0.40mm Standard 0.8 nozzle @Blocks_Pro_S100", + "renamed_from": "0.40mm Standard 0.8 nozzle @Blocks", "inherits": "fdm_process_common 0.8 nozzle", "from": "system", - "setting_id": "TSRjmfWaatY7oLJB", + "setting_id": "laOTioBGySeudJpl", "instantiation": "true", "bottom_shell_layers": "3", "top_shell_layers": "4", diff --git a/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json index d49633e89d..be66641b28 100644 --- a/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.46mm Draft 0.8 nozzle @Blocks_RF50.json @@ -22,7 +22,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks_Pro_S100.json similarity index 64% rename from resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks_Pro_S100.json index fc1a875d67..56058fc52d 100644 --- a/resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.50mm Draft 0.8 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.50mm Draft 0.8 nozzle @Blocks", + "name": "0.50mm Draft 0.8 nozzle @Blocks_Pro_S100", + "renamed_from": "0.50mm Draft 0.8 nozzle @Blocks", "inherits": "fdm_process_common 0.8 nozzle", "from": "system", - "setting_id": "vOtZHrDS88Shmf2m", + "setting_id": "oAhgUZdADR7kP87e", "instantiation": "true", "bottom_shell_layers": "3", "top_shell_layers": "4", diff --git a/resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100.json index 6b59b1c101..582cdb1043 100644 --- a/resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.50mm Optimal 1.2 nozzle @Blocks", + "name": "0.50mm Optimal 1.2 nozzle @Blocks_Pro_S100", + "renamed_from": "0.50mm Optimal 1.2 nozzle @Blocks", "inherits": "fdm_process_common 1.2 nozzle", "from": "system", - "setting_id": "BKrEAKqDYzdH43wc", + "setting_id": "0eqNgX26jemsBfV5", "instantiation": "true", "bottom_shell_layers": "2", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks_Pro_S100.json index 80e3ba5649..301c7d6dd7 100644 --- a/resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.50mm Standard 1.0 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.50mm Standard 1.0 nozzle @Blocks", + "name": "0.50mm Standard 1.0 nozzle @Blocks_Pro_S100", + "renamed_from": "0.50mm Standard 1.0 nozzle @Blocks", "inherits": "fdm_process_common 1.0 nozzle", "from": "system", - "setting_id": "D40iksDm7mFjhSKn", + "setting_id": "z1qCW1cEMc4QvBbV", "instantiation": "true", "bottom_shell_layers": "3", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json b/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json index a0e9121ceb..6700893916 100644 --- a/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json +++ b/resources/profiles/Blocks/process/0.54mm Extra Draft 0.8 nozzle @Blocks_RF50.json @@ -21,7 +21,7 @@ "top_solid_infill_flow_ratio": "0.97", "bottom_solid_infill_flow_ratio": "1.08", "seam_position": "aligned", - "sparse_infill_patter": "grid", + "sparse_infill_pattern": "grid", "initial_layer_speed": "60", "initial_layer_infill_speed": "80", "initial_travel_speed": "100%", @@ -57,5 +57,7 @@ "accel_to_decel_enable": "1", "accel_to_decel_factor": "50%", "elefant_foot_compensation": "0.25", - "elefant_foot_compensation_layers": "1" + "elefant_foot_compensation_layers": "1", + "skirt_loops": "2", + "skirt_type": "perobject" } diff --git a/resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks_Pro_S100.json similarity index 64% rename from resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks_Pro_S100.json index e59174620f..5d883bba1e 100644 --- a/resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.60mm Draft 1.0 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.60mm Draft 1.0 nozzle @Blocks", + "name": "0.60mm Draft 1.0 nozzle @Blocks_Pro_S100", + "renamed_from": "0.60mm Draft 1.0 nozzle @Blocks", "inherits": "fdm_process_common 1.0 nozzle", "from": "system", - "setting_id": "UJUe8XCBzZf8NyCL", + "setting_id": "gTTgtfG8qb9My3hH", "instantiation": "true", "bottom_shell_layers": "2", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks_Pro_S100.json similarity index 63% rename from resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks_Pro_S100.json index 598534c050..326215bc82 100644 --- a/resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.60mm Standard 1.2 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.60mm Standard 1.2 nozzle @Blocks", + "name": "0.60mm Standard 1.2 nozzle @Blocks_Pro_S100", + "renamed_from": "0.60mm Standard 1.2 nozzle @Blocks", "inherits": "fdm_process_common 1.2 nozzle", "from": "system", - "setting_id": "PSBFrTykpkytPI2Q", + "setting_id": "ApcyToENCIANrI71", "instantiation": "true", "bottom_shell_layers": "2", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks_Pro_S100.json similarity index 64% rename from resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks_Pro_S100.json index 905bb32a48..00eb2414a9 100644 --- a/resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.70mm Draft 1.2 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.70mm Draft 1.2 nozzle @Blocks", + "name": "0.70mm Draft 1.2 nozzle @Blocks_Pro_S100", + "renamed_from": "0.70mm Draft 1.2 nozzle @Blocks", "inherits": "fdm_process_common 1.2 nozzle", "from": "system", - "setting_id": "0ZQ0USGX9SwAKr29", + "setting_id": "DEv7X7zaTfxRQmjo", "instantiation": "true", "bottom_shell_layers": "2", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100.json similarity index 62% rename from resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100.json index 49eaf2c7b9..393e5937de 100644 --- a/resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.70mm Extra Draft 1.0 nozzle @Blocks", + "name": "0.70mm Extra Draft 1.0 nozzle @Blocks_Pro_S100", + "renamed_from": "0.70mm Extra Draft 1.0 nozzle @Blocks", "inherits": "fdm_process_common 1.0 nozzle", "from": "system", - "setting_id": "69PFmjOVFBOIp3Qg", + "setting_id": "nUW7N9dJmTyQT4AG", "instantiation": "true", "bottom_shell_layers": "2", "top_shell_layers": "3", diff --git a/resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks.json b/resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100.json similarity index 62% rename from resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks.json rename to resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100.json index df6d97a9d7..45642be537 100644 --- a/resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks.json +++ b/resources/profiles/Blocks/process/0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100.json @@ -1,9 +1,10 @@ { "type": "process", - "name": "0.80mm Extra Draft 1.2 nozzle @Blocks", + "name": "0.80mm Extra Draft 1.2 nozzle @Blocks_Pro_S100", + "renamed_from": "0.80mm Extra Draft 1.2 nozzle @Blocks", "inherits": "fdm_process_common 1.2 nozzle", "from": "system", - "setting_id": "iBwRI5JJewW5HJSv", + "setting_id": "JMy62SonRfK0cAdL", "instantiation": "true", "bottom_shell_layers": "2", "top_shell_layers": "2", diff --git a/resources/profiles/CONSTRUCT3D.json b/resources/profiles/CONSTRUCT3D.json index 55845903b0..eaa44771ea 100644 --- a/resources/profiles/CONSTRUCT3D.json +++ b/resources/profiles/CONSTRUCT3D.json @@ -1,6 +1,6 @@ { "name": "CONSTRUCT3D", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "Construct3D configurations", "machine_model_list": [ diff --git a/resources/profiles/CONSTRUCT3D/filament/Generic High Flow PETG @C1.json b/resources/profiles/CONSTRUCT3D/filament/Generic High Flow PETG @C1.json index 11a7df0903..9a511418e3 100644 --- a/resources/profiles/CONSTRUCT3D/filament/Generic High Flow PETG @C1.json +++ b/resources/profiles/CONSTRUCT3D/filament/Generic High Flow PETG @C1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic High Flow PETG @C1", - "inherits": "fdm_filament_pet", "renamed_from": "C1 Generic High Flow PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "STRDBlNRWBGfRctE", "filament_id": "OFNjku08", diff --git a/resources/profiles/CONSTRUCT3D/filament/Generic PETG @C1.json b/resources/profiles/CONSTRUCT3D/filament/Generic PETG @C1.json index dfb510e993..de2fa2b2ab 100644 --- a/resources/profiles/CONSTRUCT3D/filament/Generic PETG @C1.json +++ b/resources/profiles/CONSTRUCT3D/filament/Generic PETG @C1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @C1", - "inherits": "fdm_filament_pet", "renamed_from": "C1 Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "v0b4nWyzRw5z5EfK", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/CONSTRUCT3D/filament/Generic PLA @C1.json b/resources/profiles/CONSTRUCT3D/filament/Generic PLA @C1.json index 4c8a90b1de..c5474c89ff 100644 --- a/resources/profiles/CONSTRUCT3D/filament/Generic PLA @C1.json +++ b/resources/profiles/CONSTRUCT3D/filament/Generic PLA @C1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @C1", - "inherits": "fdm_filament_pla", "renamed_from": "C1 Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "mCKOBqN6Y92a9nHV", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/CONSTRUCT3D/machine/Construct 1 0.4 nozzle.json b/resources/profiles/CONSTRUCT3D/machine/Construct 1 0.4 nozzle.json index a83c207d1d..a186f253b1 100644 --- a/resources/profiles/CONSTRUCT3D/machine/Construct 1 0.4 nozzle.json +++ b/resources/profiles/CONSTRUCT3D/machine/Construct 1 0.4 nozzle.json @@ -22,12 +22,15 @@ "nozzle_type": "hardened_steel", "thumbnails_format": "QOI", "machine_max_acceleration_e": [ + "9000", "9000" ], "machine_max_acceleration_extruding": [ + "9000", "9000" ], "machine_max_acceleration_retracting": [ + "9000", "9000" ], "machine_max_acceleration_travel": [ @@ -35,30 +38,39 @@ "1250" ], "machine_max_acceleration_x": [ + "18000", "18000" ], "machine_max_acceleration_y": [ + "18000", "18000" ], "machine_max_jerk_e": [ + "6", "6" ], "machine_max_jerk_x": [ + "25", "25" ], "machine_max_jerk_y": [ + "25", "25" ], "machine_max_speed_e": [ + "100", "100" ], "machine_max_speed_x": [ + "320", "320" ], "machine_max_speed_y": [ + "320", "320" ], "machine_max_speed_z": [ + "40", "40" ], "machine_end_gcode": ";Retract the filament\nG92 E1\nG1 E-5 F900\n;Move nozzle fast\nG1 X5 Y258 F15000\n;Move Bed Down\nG1 Z180 F6000\n\n;Set machine to idle\nM104 S0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors", diff --git a/resources/profiles/CONSTRUCT3D/machine/Construct 1 XL 0.6 nozzle.json b/resources/profiles/CONSTRUCT3D/machine/Construct 1 XL 0.6 nozzle.json index ca001ed3ea..51b7b0dc75 100644 --- a/resources/profiles/CONSTRUCT3D/machine/Construct 1 XL 0.6 nozzle.json +++ b/resources/profiles/CONSTRUCT3D/machine/Construct 1 XL 0.6 nozzle.json @@ -22,12 +22,15 @@ "nozzle_type": "hardened_steel", "thumbnails_format": "QOI", "machine_max_acceleration_e": [ + "9000", "9000" ], "machine_max_acceleration_extruding": [ + "9000", "9000" ], "machine_max_acceleration_retracting": [ + "9000", "9000" ], "machine_max_acceleration_travel": [ @@ -35,30 +38,39 @@ "1250" ], "machine_max_acceleration_x": [ + "18000", "18000" ], "machine_max_acceleration_y": [ + "18000", "18000" ], "machine_max_jerk_e": [ + "6", "6" ], "machine_max_jerk_x": [ + "25", "25" ], "machine_max_jerk_y": [ + "25", "25" ], "machine_max_speed_e": [ + "100", "100" ], "machine_max_speed_x": [ + "320", "320" ], "machine_max_speed_y": [ + "320", "320" ], "machine_max_speed_z": [ + "40", "40" ], "machine_end_gcode": ";Retract the filament\nG92 E1\nG1 E-5 F900\n;Move nozzle fast\nG1 X5 Y369 F15000\n;Move Bed Down\nG1 Z400 F6000\n\n;Set machine to idle\nT-1\nM104 S0\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors\n", diff --git a/resources/profiles/Chuanying.json b/resources/profiles/Chuanying.json index 5434e13bb8..3125f8d2e9 100644 --- a/resources/profiles/Chuanying.json +++ b/resources/profiles/Chuanying.json @@ -1,7 +1,7 @@ { "name": "Chuanying", "url": "", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "Chuanying configurations", "machine_model_list": [ diff --git a/resources/profiles/Chuanying/filament/Generic ABS @Chuanying X1 0.25 Nozzle.json b/resources/profiles/Chuanying/filament/Generic ABS @Chuanying X1 0.25 Nozzle.json index f54d17ef0d..47115a5556 100644 --- a/resources/profiles/Chuanying/filament/Generic ABS @Chuanying X1 0.25 Nozzle.json +++ b/resources/profiles/Chuanying/filament/Generic ABS @Chuanying X1 0.25 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Chuanying X1 0.25 Nozzle", - "inherits": "Generic ABS @Chuanying", "renamed_from": "Chuanying ABS @Chuanying X1 0.25 Nozzle;Chuanying ABS Chuanying X1 0.25 Nozzle", + "inherits": "Generic ABS @Chuanying", "from": "system", "setting_id": "uHqfv6eUDzoxEkEj", "instantiation": "true", diff --git a/resources/profiles/Chuanying/filament/Generic ABS @Chuanying.json b/resources/profiles/Chuanying/filament/Generic ABS @Chuanying.json index 570cd814df..6c2ba4bc28 100644 --- a/resources/profiles/Chuanying/filament/Generic ABS @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic ABS @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Chuanying", - "inherits": "fdm_filament_abs", "renamed_from": "Chuanying Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "iOgVkaYF0sixbb9x", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Chuanying/filament/Generic ASA @Chuanying X1 0.25 Nozzle.json b/resources/profiles/Chuanying/filament/Generic ASA @Chuanying X1 0.25 Nozzle.json index 690f31669a..903dd7feb2 100644 --- a/resources/profiles/Chuanying/filament/Generic ASA @Chuanying X1 0.25 Nozzle.json +++ b/resources/profiles/Chuanying/filament/Generic ASA @Chuanying X1 0.25 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Chuanying X1 0.25 Nozzle", - "inherits": "Generic ASA @Chuanying", "renamed_from": "Chuanying ASA @Chuanying X1 0.25 Nozzle;Chuanying ASA Chuanying X1 0.25 Nozzle", + "inherits": "Generic ASA @Chuanying", "from": "system", "setting_id": "bVxY01TC9sAM9KQW", "instantiation": "true", diff --git a/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying X1 0.25 Nozzle.json b/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying X1 0.25 Nozzle.json index 339fae8619..7a3e125246 100644 --- a/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying X1 0.25 Nozzle.json +++ b/resources/profiles/Chuanying/filament/Generic HS PLA @Chuanying X1 0.25 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic HS PLA @Chuanying X1 0.25 Nozzle", - "inherits": "Generic HS PLA @Chuanying", "renamed_from": "Chuanying HS PLA @Chuanying X1 0.25 Nozzle;Chuanying HS PLA Chuanying X1 0.25 Nozzle", + "inherits": "Generic HS PLA @Chuanying", "from": "system", "setting_id": "gdW1LIVf6BecAtpa", "instantiation": "true", diff --git a/resources/profiles/Chuanying/filament/Generic PETG @Chuanying X1 0.25 Nozzle.json b/resources/profiles/Chuanying/filament/Generic PETG @Chuanying X1 0.25 Nozzle.json index 88eaf57c01..c31060d7bd 100644 --- a/resources/profiles/Chuanying/filament/Generic PETG @Chuanying X1 0.25 Nozzle.json +++ b/resources/profiles/Chuanying/filament/Generic PETG @Chuanying X1 0.25 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Chuanying X1 0.25 Nozzle", - "inherits": "Generic PETG @Chuanying", "renamed_from": "Chuanying PETG @Chuanying X1 0.25 Nozzle;Chuanying PETG Chuanying X1 0.25 Nozzle", + "inherits": "Generic PETG @Chuanying", "from": "system", "setting_id": "YQ0HAxEDmMQgqNGY", "instantiation": "true", diff --git a/resources/profiles/Chuanying/filament/Generic PETG @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PETG @Chuanying.json index ae84fb2982..ef2c336b7f 100644 --- a/resources/profiles/Chuanying/filament/Generic PETG @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic PETG @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Chuanying", - "inherits": "fdm_filament_pet", "renamed_from": "Chuanying Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "Mq3uwHDMub81SuRG", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Chuanying/filament/Generic PLA @Chuanying X1 0.25 Nozzle.json b/resources/profiles/Chuanying/filament/Generic PLA @Chuanying X1 0.25 Nozzle.json index cea064f9da..05a142627f 100644 --- a/resources/profiles/Chuanying/filament/Generic PLA @Chuanying X1 0.25 Nozzle.json +++ b/resources/profiles/Chuanying/filament/Generic PLA @Chuanying X1 0.25 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Chuanying X1 0.25 Nozzle", - "inherits": "Generic PLA @Chuanying", "renamed_from": "Chuanying PLA @Chuanying X1 0.25 Nozzle;Chuanying PLA Chuanying X1 0.25 Nozzle", + "inherits": "Generic PLA @Chuanying", "from": "system", "setting_id": "XsPEVGHYiyAX4YXy", "instantiation": "true", diff --git a/resources/profiles/Chuanying/filament/Generic PLA @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PLA @Chuanying.json index 3fcf7cf873..cf8b954c96 100644 --- a/resources/profiles/Chuanying/filament/Generic PLA @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic PLA @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Chuanying", - "inherits": "fdm_filament_pla", "renamed_from": "Chuanying Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "PRk8NAihEzwi5Dqd", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying X1 0.25 Nozzle.json b/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying X1 0.25 Nozzle.json index 66d057cbf1..94f0bce238 100644 --- a/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying X1 0.25 Nozzle.json +++ b/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying X1 0.25 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-Silk @Chuanying X1 0.25 Nozzle", - "inherits": "Generic PLA-Silk @Chuanying", "renamed_from": "Chuanying PLA-SILK @Chuanying X1 0.25 Nozzle;Chuanying PLA-SILK Chuanying X1 0.25 Nozzle", + "inherits": "Generic PLA-Silk @Chuanying", "from": "system", "setting_id": "XaGDKARkuGTTabMN", "instantiation": "true", diff --git a/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying.json b/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying.json index 0739646658..f35355b2b7 100644 --- a/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying.json +++ b/resources/profiles/Chuanying/filament/Generic PLA-Silk @Chuanying.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-Silk @Chuanying", - "inherits": "fdm_filament_pla", "renamed_from": "Chuanying Generic PLA-Silk", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "tSCou6bWg8eY1TFn", "filament_id": "OFi6PfUM", diff --git a/resources/profiles/Co Print.json b/resources/profiles/Co Print.json index 2e1ad809eb..18902a2932 100644 --- a/resources/profiles/Co Print.json +++ b/resources/profiles/Co Print.json @@ -1,6 +1,6 @@ { "name": "Co Print", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "CoPrint configurations", "machine_model_list": [ diff --git a/resources/profiles/Co Print/filament/Generic ABS @CoPrint.json b/resources/profiles/Co Print/filament/Generic ABS @CoPrint.json index f047afc265..470a917e55 100644 --- a/resources/profiles/Co Print/filament/Generic ABS @CoPrint.json +++ b/resources/profiles/Co Print/filament/Generic ABS @CoPrint.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @CoPrint", - "inherits": "Generic PLA @CoPrint", "renamed_from": "CoPrint Generic ABS", + "inherits": "Generic PLA @CoPrint", "from": "system", "setting_id": "T6mJwfI7n1YDmDzv", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Co Print/filament/Generic PETG @CoPrint.json b/resources/profiles/Co Print/filament/Generic PETG @CoPrint.json index dd2d03af04..331056a6d9 100644 --- a/resources/profiles/Co Print/filament/Generic PETG @CoPrint.json +++ b/resources/profiles/Co Print/filament/Generic PETG @CoPrint.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @CoPrint", - "inherits": "Generic PLA @CoPrint", "renamed_from": "CoPrint Generic PETG", + "inherits": "Generic PLA @CoPrint", "from": "system", "setting_id": "99zIrGIXC9RUGDlM", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Co Print/filament/Generic TPU @CoPrint.json b/resources/profiles/Co Print/filament/Generic TPU @CoPrint.json index c25896fe55..f536912987 100644 --- a/resources/profiles/Co Print/filament/Generic TPU @CoPrint.json +++ b/resources/profiles/Co Print/filament/Generic TPU @CoPrint.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @CoPrint", - "inherits": "Generic PLA @CoPrint", "renamed_from": "CoPrint Generic TPU", + "inherits": "Generic PLA @CoPrint", "from": "system", "setting_id": "0V6UoaCfNUIwYwah", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus.json b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus.json index f032c9bf6e..17fe8260d1 100644 --- a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus.json +++ b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3 Plus.json @@ -29,48 +29,63 @@ "0.5" ], "machine_max_speed_e": [ + "100", "100" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_acceleration_e": [ + "2500", "2500" ], "machine_max_acceleration_extruding": [ + "5000", "5000" ], "machine_max_acceleration_retracting": [ + "2500", "2500" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "5000", "5000" ], "machine_max_acceleration_y": [ + "5000", "5000" ], "machine_max_acceleration_z": [ + "100", "100" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "8", "8" ], "machine_max_jerk_y": [ + "8", "8" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "z_hop": [ diff --git a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3.json b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3.json index a36e231d94..e479a91cc6 100644 --- a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3.json +++ b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle - Ender-3 V3.json @@ -29,48 +29,63 @@ "0.5" ], "machine_max_speed_e": [ + "100", "100" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_acceleration_e": [ + "2500", "2500" ], "machine_max_acceleration_extruding": [ + "5000", "5000" ], "machine_max_acceleration_retracting": [ + "2500", "2500" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "5000", "5000" ], "machine_max_acceleration_y": [ + "5000", "5000" ], "machine_max_acceleration_z": [ + "100", "100" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "8", "8" ], "machine_max_jerk_y": [ + "8", "8" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "z_hop": [ diff --git a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle fast.json b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle fast.json index 2d206c1734..15620e545e 100644 --- a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle fast.json +++ b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle fast.json @@ -29,48 +29,63 @@ "0.5" ], "machine_max_speed_e": [ + "100", "100" ], "machine_max_speed_x": [ + "700", "700" ], "machine_max_speed_y": [ + "700", "700" ], "machine_max_speed_z": [ + "20", "20" ], "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", "20000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "z_hop": [ diff --git a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle.json b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle.json index 72116fcd70..1f9cf4a9d1 100644 --- a/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle.json +++ b/resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle.json @@ -29,48 +29,63 @@ "0.5" ], "machine_max_speed_e": [ + "100", "100" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_acceleration_e": [ + "2500", "2500" ], "machine_max_acceleration_extruding": [ + "5000", "5000" ], "machine_max_acceleration_retracting": [ + "2500", "2500" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "5000", "5000" ], "machine_max_acceleration_y": [ + "5000", "5000" ], "machine_max_acceleration_z": [ + "100", "100" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "8", "8" ], "machine_max_jerk_y": [ + "8", "8" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "z_hop": [ diff --git a/resources/profiles/CoLiDo.json b/resources/profiles/CoLiDo.json index f27623c7bc..3aaee455d3 100644 --- a/resources/profiles/CoLiDo.json +++ b/resources/profiles/CoLiDo.json @@ -1,6 +1,6 @@ { "name": "CoLiDo", - "version": "02.04.00.05", + "version": "02.04.00.07", "force_update": "0", "description": "CoLiDo configurations", "machine_model_list": [ diff --git a/resources/profiles/CoLiDo/CoLiDo SR1_cover.png b/resources/profiles/CoLiDo/CoLiDo SR1_cover.png index 79bf3e9cfb..ca4cdca253 100644 Binary files a/resources/profiles/CoLiDo/CoLiDo SR1_cover.png and b/resources/profiles/CoLiDo/CoLiDo SR1_cover.png differ diff --git a/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo DIY 4.0.json b/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo DIY 4.0.json index acb6033883..cd80fbd170 100644 --- a/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo DIY 4.0.json +++ b/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo DIY 4.0.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @CoLiDo DIY 4.0", - "inherits": "fdm_filament_abs", "renamed_from": "CoLiDo Generic ABS @CoLiDo DIY 4.0;CoLiDo Generic ABS CoLiDo DIY 4.0", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "XLTLGUPGcCZnX5XA", "filament_id": "OFY9muEs", diff --git a/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo X16.json b/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo X16.json index aa567b7ba8..c5707a18cb 100644 --- a/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo X16.json +++ b/resources/profiles/CoLiDo/filament/Generic ABS @CoLiDo X16.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @CoLiDo X16", - "inherits": "fdm_filament_abs", "renamed_from": "CoLiDo Generic ABS @CoLiDo X16;CoLiDo Generic ABS CoLiDo X16", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "LE7jeYUNsBZEKQpJ", "filament_id": "OFY9muEs", diff --git a/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo DIY 4.0.json b/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo DIY 4.0.json index d70dd4d511..cf724d73c4 100644 --- a/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo DIY 4.0.json +++ b/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo DIY 4.0.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @CoLiDo DIY 4.0", - "inherits": "fdm_filament_pet", "renamed_from": "CoLiDo Generic PETG @CoLiDo DIY 4.0;CoLiDo Generic PETG CoLiDo DIY 4.0", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "FV2MjDSWlg3kolp3", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo X16.json b/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo X16.json index 5f68b5600b..771cbc8dd7 100644 --- a/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo X16.json +++ b/resources/profiles/CoLiDo/filament/Generic PETG @CoLiDo X16.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @CoLiDo X16", - "inherits": "fdm_filament_pet", "renamed_from": "CoLiDo Generic PETG @CoLiDo X16;CoLiDo Generic PETG CoLiDo X16", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "eX4i0rDwO3rAlQ2y", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo DIY 4.0.json b/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo DIY 4.0.json index 9bd8db3357..0bea71d187 100644 --- a/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo DIY 4.0.json +++ b/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo DIY 4.0.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @CoLiDo DIY 4.0", - "inherits": "fdm_filament_pla", "renamed_from": "CoLiDo Generic PLA @CoLiDo DIY 4.0;CoLiDo Generic PLA CoLiDo DIY 4.0", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "POF6nKughZF8OsBF", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo X16.json b/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo X16.json index f437702111..601ba78cde 100644 --- a/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo X16.json +++ b/resources/profiles/CoLiDo/filament/Generic PLA @CoLiDo X16.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @CoLiDo X16", - "inherits": "fdm_filament_pla", "renamed_from": "CoLiDo Generic PLA @CoLiDo X16;CoLiDo Generic PLA CoLiDo X16", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "38SFNLJEVBeAVL3B", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo DIY 4.0.json b/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo DIY 4.0.json index 0422f6b4c6..46dce9d565 100644 --- a/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo DIY 4.0.json +++ b/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo DIY 4.0.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @CoLiDo DIY 4.0", - "inherits": "fdm_filament_tpu", "renamed_from": "CoLiDo Generic TPU @CoLiDo DIY 4.0;CoLiDo Generic TPU CoLiDo DIY 4.0", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "5tJNn6c6RXqJUT2z", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo X16.json b/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo X16.json index ccf0d405b1..f1ba622d3b 100644 --- a/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo X16.json +++ b/resources/profiles/CoLiDo/filament/Generic TPU @CoLiDo X16.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @CoLiDo X16", - "inherits": "fdm_filament_tpu", "renamed_from": "CoLiDo Generic TPU @CoLiDo X16;CoLiDo Generic TPU CoLiDo X16", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "wylEuYSIKlzSVnoQ", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json index b02f431b3e..76da0b0c03 100644 --- a/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json +++ b/resources/profiles/CoLiDo/machine/CoLiDo 160 V2 0.4 nozzle.json @@ -57,12 +57,15 @@ "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-3.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y0 F3000 ; park print head\nM84 ; disable motors", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "1000", "1000" ], "machine_max_acceleration_retracting": [ + "1000", "1000" ], "machine_max_acceleration_travel": [ @@ -70,36 +73,47 @@ "0" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "8", "8" ], "machine_max_jerk_y": [ + "8", "8" ], "machine_max_jerk_z": [ + "0.4", "0.4" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "300", "300" ], "machine_max_speed_y": [ + "300", "300" ], "machine_max_speed_z": [ + "10", "10" ], "machine_min_extruding_rate": [ diff --git a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json index 4110cbe15d..ee232937ba 100644 --- a/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json +++ b/resources/profiles/CoLiDo/machine/CoLiDo X16 0.4 nozzle.json @@ -57,12 +57,15 @@ "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-3.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y0 F3000 ; park print head\nM84 ; disable motors", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "1000", "1000" ], "machine_max_acceleration_retracting": [ + "1000", "1000" ], "machine_max_acceleration_travel": [ @@ -70,36 +73,47 @@ "0" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "8", "8" ], "machine_max_jerk_y": [ + "8", "8" ], "machine_max_jerk_z": [ + "0.4", "0.4" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "300", "300" ], "machine_max_speed_y": [ + "300", "300" ], "machine_max_speed_z": [ + "10", "10" ], "machine_min_extruding_rate": [ diff --git a/resources/profiles/Comgrow.json b/resources/profiles/Comgrow.json index e3eb237518..d5e20fc2da 100644 --- a/resources/profiles/Comgrow.json +++ b/resources/profiles/Comgrow.json @@ -1,6 +1,6 @@ { "name": "Comgrow", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "Comgrow configurations", "machine_model_list": [ diff --git a/resources/profiles/Comgrow/filament/Generic ABS @Comgrow.json b/resources/profiles/Comgrow/filament/Generic ABS @Comgrow.json index 0494418d88..dd0b824817 100644 --- a/resources/profiles/Comgrow/filament/Generic ABS @Comgrow.json +++ b/resources/profiles/Comgrow/filament/Generic ABS @Comgrow.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Comgrow", - "inherits": "fdm_filament_abs", "renamed_from": "Comgrow Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "jprGDn9oZEZu4N97", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Comgrow/filament/Generic PETG @Comgrow.json b/resources/profiles/Comgrow/filament/Generic PETG @Comgrow.json index 12b29d0b1d..c22a95c514 100644 --- a/resources/profiles/Comgrow/filament/Generic PETG @Comgrow.json +++ b/resources/profiles/Comgrow/filament/Generic PETG @Comgrow.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Comgrow", - "inherits": "fdm_filament_pet", "renamed_from": "Comgrow Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "xi0S7KdXD7lwr3H8", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Comgrow/filament/Generic PLA @Comgrow T300.json b/resources/profiles/Comgrow/filament/Generic PLA @Comgrow T300.json index bde24b8ba0..cf4a01fa4f 100644 --- a/resources/profiles/Comgrow/filament/Generic PLA @Comgrow T300.json +++ b/resources/profiles/Comgrow/filament/Generic PLA @Comgrow T300.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Comgrow T300", - "inherits": "Generic PLA @Comgrow", "renamed_from": "Comgrow T300 PLA", + "inherits": "Generic PLA @Comgrow", "from": "system", "setting_id": "3N6gPGkzpE9CvkVz", "instantiation": "true", diff --git a/resources/profiles/Comgrow/filament/Generic PLA @Comgrow.json b/resources/profiles/Comgrow/filament/Generic PLA @Comgrow.json index 21b8e19d42..c7c5c60ca3 100644 --- a/resources/profiles/Comgrow/filament/Generic PLA @Comgrow.json +++ b/resources/profiles/Comgrow/filament/Generic PLA @Comgrow.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Comgrow", - "inherits": "fdm_filament_pla", "renamed_from": "Comgrow Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "oxIMSlkJ8C40mJIv", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Comgrow/machine/Comgrow T300 0.4 nozzle.json b/resources/profiles/Comgrow/machine/Comgrow T300 0.4 nozzle.json index 2453aefcab..2af8864abf 100644 --- a/resources/profiles/Comgrow/machine/Comgrow T300 0.4 nozzle.json +++ b/resources/profiles/Comgrow/machine/Comgrow T300 0.4 nozzle.json @@ -27,45 +27,59 @@ "0.8" ], "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_x": [ + "12000", "12000" ], "machine_max_acceleration_y": [ + "12000", "12000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_z": [ + "20", "20" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "0.25", "0.25" ], "machine_max_jerk_e": [ + "3", "3" ], "z_hop": [ diff --git a/resources/profiles/Creality.json b/resources/profiles/Creality.json index b5d5b420bd..f9657c7034 100644 --- a/resources/profiles/Creality.json +++ b/resources/profiles/Creality.json @@ -1,6 +1,6 @@ { "name": "Creality", - "version": "02.03.02.84", + "version": "02.03.02.86", "force_update": "0", "description": "Creality configurations", "machine_model_list": [ diff --git a/resources/profiles/Creality/Creality Ender-3 V4_cover.png b/resources/profiles/Creality/Creality Ender-3 V4_cover.png index ac4526fed0..60b5b3d3a6 100644 Binary files a/resources/profiles/Creality/Creality Ender-3 V4_cover.png and b/resources/profiles/Creality/Creality Ender-3 V4_cover.png differ diff --git a/resources/profiles/Creality/Creality K1 Max_CFS-C_cover.png b/resources/profiles/Creality/Creality K1 Max_CFS-C_cover.png index 52499b572b..fd7e344043 100644 Binary files a/resources/profiles/Creality/Creality K1 Max_CFS-C_cover.png and b/resources/profiles/Creality/Creality K1 Max_CFS-C_cover.png differ diff --git a/resources/profiles/Creality/Creality K1 SE_CFS-C_cover.png b/resources/profiles/Creality/Creality K1 SE_CFS-C_cover.png index f7ce98e840..6cb63c833c 100644 Binary files a/resources/profiles/Creality/Creality K1 SE_CFS-C_cover.png and b/resources/profiles/Creality/Creality K1 SE_CFS-C_cover.png differ diff --git a/resources/profiles/Creality/Creality K1C_CFS-C_cover.png b/resources/profiles/Creality/Creality K1C_CFS-C_cover.png index 2d49bc6f46..5ac50899ec 100644 Binary files a/resources/profiles/Creality/Creality K1C_CFS-C_cover.png and b/resources/profiles/Creality/Creality K1C_CFS-C_cover.png differ diff --git a/resources/profiles/Creality/Creality K1_CFS-C_cover.png b/resources/profiles/Creality/Creality K1_CFS-C_cover.png index f91158f668..e1c02f0c48 100644 Binary files a/resources/profiles/Creality/Creality K1_CFS-C_cover.png and b/resources/profiles/Creality/Creality K1_CFS-C_cover.png differ diff --git a/resources/profiles/Creality/Creality K2 SE_cover.png b/resources/profiles/Creality/Creality K2 SE_cover.png index c335885597..d5d53937fc 100644 Binary files a/resources/profiles/Creality/Creality K2 SE_cover.png and b/resources/profiles/Creality/Creality K2 SE_cover.png differ diff --git a/resources/profiles/Creality/Creality SPARKX i7_cover.png b/resources/profiles/Creality/Creality SPARKX i7_cover.png index 076d521faa..20b8042f61 100644 Binary files a/resources/profiles/Creality/Creality SPARKX i7_cover.png and b/resources/profiles/Creality/Creality SPARKX i7_cover.png differ diff --git a/resources/profiles/Creality/creality_SPARKX_buildplate_model.stl b/resources/profiles/Creality/creality_SPARKX_buildplate_model.stl index 91de14606e..6b9935aff5 100644 Binary files a/resources/profiles/Creality/creality_SPARKX_buildplate_model.stl and b/resources/profiles/Creality/creality_SPARKX_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_SPARKX_buildplate_texture.svg b/resources/profiles/Creality/creality_SPARKX_buildplate_texture.svg new file mode 100644 index 0000000000..53f9ee4f54 --- /dev/null +++ b/resources/profiles/Creality/creality_SPARKX_buildplate_texture.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/resources/profiles/Creality/creality_ender3v4_buildplate_model.stl b/resources/profiles/Creality/creality_ender3v4_buildplate_model.stl new file mode 100644 index 0000000000..4e9ed9b65b Binary files /dev/null and b/resources/profiles/Creality/creality_ender3v4_buildplate_model.stl differ diff --git a/resources/profiles/Creality/creality_ender3v4_buildplate_texture.svg b/resources/profiles/Creality/creality_ender3v4_buildplate_texture.svg new file mode 100644 index 0000000000..53f9ee4f54 --- /dev/null +++ b/resources/profiles/Creality/creality_ender3v4_buildplate_texture.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json index 10bdfa06e1..0cf3dfb96d 100644 --- a/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json @@ -46,7 +46,7 @@ "0" ], "filament_max_volumetric_speed": [ - "10" + "18" ], "filament_minimal_purge_on_wipe_tower": [ "15" diff --git a/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json index 4a9e23750b..622e88b93d 100644 --- a/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json @@ -40,7 +40,7 @@ "14" ], "filament_density": [ - "1.23" + "1.24" ], "filament_flow_ratio": [ "0.95" @@ -49,10 +49,10 @@ "0" ], "filament_max_volumetric_speed": [ - "12" + "18" ], "filament_retraction_length": [ - "0.8" + "1.2" ], "filament_type": [ "PETG" @@ -67,10 +67,10 @@ "70" ], "nozzle_temperature": [ - "250" + "240" ], "nozzle_temperature_initial_layer": [ - "250" + "240" ], "nozzle_temperature_range_high": [ "270" @@ -79,7 +79,7 @@ "220" ], "overhang_fan_speed": [ - "90" + "100" ], "overhang_fan_threshold": [ "25%" @@ -94,7 +94,7 @@ "20" ], "temperature_vitrification": [ - "80" + "60" ], "textured_plate_temp": [ "70" diff --git a/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json index 48d6542c23..67b418e22f 100644 --- a/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json @@ -46,7 +46,7 @@ "0" ], "filament_max_volumetric_speed": [ - "16" + "18" ], "filament_minimal_purge_on_wipe_tower": [ "15" diff --git a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json index fc0b3e724a..4935d41c7d 100644 --- a/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json @@ -46,7 +46,7 @@ "0" ], "filament_max_volumetric_speed": [ - "16" + "18" ], "filament_minimal_purge_on_wipe_tower": [ "15" diff --git a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json index ae46802d71..23239f3115 100644 --- a/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json @@ -49,7 +49,7 @@ "0" ], "filament_max_volumetric_speed": [ - "12" + "18" ], "filament_minimal_purge_on_wipe_tower": [ "15" diff --git a/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json b/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json index d1d211884e..a157181008 100644 --- a/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json @@ -49,7 +49,7 @@ "0" ], "filament_max_volumetric_speed": [ - "12" + "10" ], "filament_minimal_purge_on_wipe_tower": [ "15" @@ -100,10 +100,10 @@ "50" ], "nozzle_temperature": [ - "230" + "220" ], "nozzle_temperature_initial_layer": [ - "230" + "220" ], "nozzle_temperature_range_high": [ "240" diff --git a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json index cf7a5ef46a..8830fb9d0c 100644 --- a/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json @@ -49,7 +49,7 @@ "0" ], "filament_max_volumetric_speed": [ - "16" + "23" ], "filament_minimal_purge_on_wipe_tower": [ "15" @@ -155,7 +155,7 @@ "filament_unloading_speed_start": "100", "material_flow_dependent_temperature": "0", "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.05", + "pressure_advance": "0.04", "support_material_interface_fan_speed": "-1", "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic ABS @Creality Ender-3V3-all.json index 4081db783f..162ef3ddc7 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Creality Ender-3V3-all", - "inherits": "Generic ABS @Creality", "renamed_from": "Creality Generic ABS @Ender-3V3-all;Creality Generic ABS Ender-3V3-all", + "inherits": "Generic ABS @Creality", "from": "system", "setting_id": "RqMPGyaU3l17zFrA", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic ABS @Creality Hi-all.json index aba8475a20..f459b7cc06 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Creality Hi-all", - "inherits": "Generic ABS @Creality", "renamed_from": "Creality Generic ABS @Hi-all;Creality Generic ABS Hi-all", + "inherits": "Generic ABS @Creality", "from": "system", "setting_id": "W2NhLx7Lw4NxWJY6", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality K1-all.json b/resources/profiles/Creality/filament/Generic ABS @Creality K1-all.json index 0ea7629f24..384b1c3ff0 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Creality K1-all", - "inherits": "Generic ABS @Creality", "renamed_from": "Creality Generic ABS @K1-all;Creality Generic ABS K1-all", + "inherits": "Generic ABS @Creality", "from": "system", "setting_id": "9hr2XywDT7lTehYd", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality K2-all.json b/resources/profiles/Creality/filament/Generic ABS @Creality K2-all.json index 4aab7d7d0d..0674bc1066 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic ABS @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Creality K2-all", - "inherits": "Generic ABS @Creality", "renamed_from": "Creality Generic ABS @K2-all;Creality Generic ABS K2-all", + "inherits": "Generic ABS @Creality", "from": "system", "setting_id": "39krWtacUjDnf03V", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ABS @Creality.json b/resources/profiles/Creality/filament/Generic ABS @Creality.json index 2e0bb44fa0..622178222c 100644 --- a/resources/profiles/Creality/filament/Generic ABS @Creality.json +++ b/resources/profiles/Creality/filament/Generic ABS @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Creality", - "inherits": "fdm_filament_abs", "renamed_from": "Creality Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "My3UvJeg30wW7hLq", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Creality/filament/Generic ASA @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic ASA @Creality Ender-3V3-all.json index 0675884518..7b559b188c 100644 --- a/resources/profiles/Creality/filament/Generic ASA @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Creality Ender-3V3-all", - "inherits": "Generic ASA @Creality", "renamed_from": "Creality Generic ASA @Ender-3V3-all;Creality Generic ASA Ender-3V3-all", + "inherits": "Generic ASA @Creality", "from": "system", "setting_id": "LXPKRyWzBzo9nU8k", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ASA @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic ASA @Creality Hi-all.json index e706078d18..525e1682ac 100644 --- a/resources/profiles/Creality/filament/Generic ASA @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Creality Hi-all", - "inherits": "Generic ASA @Creality", "renamed_from": "Creality Generic ASA @Hi-all;Creality Generic ASA Hi-all", + "inherits": "Generic ASA @Creality", "from": "system", "setting_id": "kcMcMJUiRgTRFe8P", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ASA @Creality K1-all.json b/resources/profiles/Creality/filament/Generic ASA @Creality K1-all.json index 91feecf436..c1b8e3e588 100644 --- a/resources/profiles/Creality/filament/Generic ASA @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Creality K1-all", - "inherits": "Generic ASA @Creality", "renamed_from": "Creality Generic ASA @K1-all;Creality Generic ASA K1-all", + "inherits": "Generic ASA @Creality", "from": "system", "setting_id": "GQVdb7ZBWA55Ld0m", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ASA @Creality K2-all.json b/resources/profiles/Creality/filament/Generic ASA @Creality K2-all.json index 510e1d7660..a3b9c1bb98 100644 --- a/resources/profiles/Creality/filament/Generic ASA @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic ASA @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Creality K2-all", - "inherits": "Generic ASA @Creality", "renamed_from": "Creality Generic ASA @K2-all;Creality Generic ASA K2-all", + "inherits": "Generic ASA @Creality", "from": "system", "setting_id": "XJKLmHYbW2ReKSKs", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic ASA @Creality.json b/resources/profiles/Creality/filament/Generic ASA @Creality.json index 0ef5d15433..3b7c470734 100644 --- a/resources/profiles/Creality/filament/Generic ASA @Creality.json +++ b/resources/profiles/Creality/filament/Generic ASA @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Creality", - "inherits": "fdm_filament_asa", "renamed_from": "Creality Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "dCUxfG2JXDg56zTK", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Creality/filament/Generic ASA-CF @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic ASA-CF @Creality Hi-all.json index 7a462cc250..f0fb24f465 100644 --- a/resources/profiles/Creality/filament/Generic ASA-CF @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic ASA-CF @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA-CF @Creality Hi-all", - "inherits": "Generic ASA @Creality Hi-all", "renamed_from": "Creality Generic ASA-CF @Hi-all;Creality Generic ASA-CF Hi-all", + "inherits": "Generic ASA @Creality Hi-all", "from": "system", "setting_id": "MwKV8Lh4XzvMUVYA", "filament_id": "OF53eLVD", diff --git a/resources/profiles/Creality/filament/Generic PA-CF @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic PA-CF @Creality Ender-3V3-all.json index 152c8100d6..4619cbadef 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Creality Ender-3V3-all", - "inherits": "Generic PA-CF @Creality", "renamed_from": "Creality Generic PA-CF @Ender-3V3-all;Creality Generic PA-CF Ender-3V3-all", + "inherits": "Generic PA-CF @Creality", "from": "system", "setting_id": "L9lg0gKfwuz9xcs4", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PA-CF @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PA-CF @Creality K1-all.json index 72519b07f2..23927dca0a 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Creality K1-all", - "inherits": "Generic PA-CF @Creality", "renamed_from": "Creality Generic PA-CF @K1-all;Creality Generic PA-CF K1-all", + "inherits": "Generic PA-CF @Creality", "from": "system", "setting_id": "BkM0CVxYrvFPAbpQ", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PA-CF @Creality K2-all.json b/resources/profiles/Creality/filament/Generic PA-CF @Creality K2-all.json index 932c37b2a2..7b3b8d746c 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Creality K2-all", - "inherits": "Generic PA-CF @Creality", "renamed_from": "Creality Generic PA-CF @K2-all;Creality Generic PA-CF K2-all", + "inherits": "Generic PA-CF @Creality", "from": "system", "setting_id": "jCFh6dGbNQt7YHNB", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PA-CF @Creality.json b/resources/profiles/Creality/filament/Generic PA-CF @Creality.json index 964672343a..dfc1124f92 100644 --- a/resources/profiles/Creality/filament/Generic PA-CF @Creality.json +++ b/resources/profiles/Creality/filament/Generic PA-CF @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Creality", - "inherits": "fdm_filament_pa", "renamed_from": "Creality Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "JDbda1VeHrPKR0NN", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Creality/filament/Generic PC @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PC @Creality K1-all.json index a73499e2e9..684093851f 100644 --- a/resources/profiles/Creality/filament/Generic PC @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PC @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Creality K1-all", - "inherits": "Generic PC @Creality", "renamed_from": "Creality Generic PC @K1-all;Creality Generic PC K1-all", + "inherits": "Generic PC @Creality", "from": "system", "setting_id": "Jk9yNMEqu4M92edj", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic PETG @Creality Ender-3V3-all.json index 5cabe6f64d..039a6143bc 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Creality Ender-3V3-all", - "inherits": "Generic PETG @Creality", "renamed_from": "Creality Generic PETG @Ender-3V3-all;Creality Generic PETG Ender-3V3-all", + "inherits": "Generic PETG @Creality", "from": "system", "setting_id": "sX2aMXNynDp6VKSR", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PETG @Creality Hi-all.json index 0092cf5d12..5558df0d9d 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Creality Hi-all", - "inherits": "Generic PETG @Creality", "renamed_from": "Creality Generic PETG @Hi-all;Creality Generic PETG Hi-all", + "inherits": "Generic PETG @Creality", "from": "system", "setting_id": "QcMkrViYBKh4oISG", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PETG @Creality K1-all.json index 06fb485fd0..ca5022fa42 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Creality K1-all", - "inherits": "Generic PETG @Creality", "renamed_from": "Creality Generic PETG @K1-all;Creality Generic PETG K1-all", + "inherits": "Generic PETG @Creality", "from": "system", "setting_id": "YEB1keha4rhCSmq8", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality K2-all.json b/resources/profiles/Creality/filament/Generic PETG @Creality K2-all.json index 87e82d3eb5..45a308e5d0 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic PETG @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Creality K2-all", - "inherits": "Generic PETG @Creality", "renamed_from": "Creality Generic PETG @K2-all;Creality Generic PETG K2-all", + "inherits": "Generic PETG @Creality", "from": "system", "setting_id": "IrbPRxkyhiUXaPEu", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PETG @Creality.json b/resources/profiles/Creality/filament/Generic PETG @Creality.json index d6b81cb3fd..f97d600565 100644 --- a/resources/profiles/Creality/filament/Generic PETG @Creality.json +++ b/resources/profiles/Creality/filament/Generic PETG @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Creality", - "inherits": "fdm_filament_pet", "renamed_from": "Creality Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "B8lWG3jJQ4ar4j70", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Creality/filament/Generic PETG-CF @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PETG-CF @Creality Hi-all.json index 5049c12c57..bf246e0b8d 100644 --- a/resources/profiles/Creality/filament/Generic PETG-CF @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PETG-CF @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Creality Hi-all", - "inherits": "Generic PETG @Creality Hi-all", "renamed_from": "Creality Generic PETG-CF @Hi-all;Creality Generic PETG-CF Hi-all", + "inherits": "Generic PETG @Creality Hi-all", "from": "system", "setting_id": "dWEGZoSVFzj7e9m1", "filament_id": "OFoYSJKi", diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic PLA @Creality Ender-3V3-all.json index 3c2e7de2ed..7882700836 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Creality Ender-3V3-all", - "inherits": "Generic PLA @Creality", "renamed_from": "Creality Generic PLA @Ender-3V3-all;Creality Generic PLA Ender-3V3-all", + "inherits": "Generic PLA @Creality", "from": "system", "setting_id": "uGq3aWYUI2sLJORU", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PLA @Creality K1-all.json index ac6f727f02..725d4bbb18 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Creality K1-all", - "inherits": "Generic PLA @Creality", "renamed_from": "Creality Generic PLA @K1-all;Creality Generic PLA K1-all", + "inherits": "Generic PLA @Creality", "from": "system", "setting_id": "oO2HaneRPfqxNQsP", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality K2-all.json b/resources/profiles/Creality/filament/Generic PLA @Creality K2-all.json index bf98b76c5a..125879698b 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Creality K2-all", - "inherits": "Generic PLA @Creality", "renamed_from": "Creality Generic PLA @K2-all;Creality Generic PLA K2-all", + "inherits": "Generic PLA @Creality", "from": "system", "setting_id": "EC0PPocMp0c4O0dK", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PLA @Creality.json b/resources/profiles/Creality/filament/Generic PLA @Creality.json index 248ff78dcb..9ffb7083d7 100644 --- a/resources/profiles/Creality/filament/Generic PLA @Creality.json +++ b/resources/profiles/Creality/filament/Generic PLA @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Creality", - "inherits": "fdm_filament_pla", "renamed_from": "Creality Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "UNUCEjCpe1e4ICT9", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Creality/filament/Generic PLA HF @Creality.json b/resources/profiles/Creality/filament/Generic PLA HF @Creality.json index 235e113a59..84efc28eb7 100644 --- a/resources/profiles/Creality/filament/Generic PLA HF @Creality.json +++ b/resources/profiles/Creality/filament/Generic PLA HF @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA HF @Creality", - "inherits": "fdm_filament_pla", "renamed_from": "Creality HF Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "YXqIFmq63jGbN8aZ", "filament_id": "OFZr862X", diff --git a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Ender-3V3-all.json index 21d1029a5d..bd353acb91 100644 --- a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Creality Ender-3V3-all", - "inherits": "Generic PLA @Creality Ender-3V3-all", "renamed_from": "Creality Generic PLA High Speed @Ender-3V3-all;Creality Generic PLA High Speed Ender-3V3-all", + "inherits": "Generic PLA @Creality Ender-3V3-all", "from": "system", "setting_id": "MOH1B7U4Ipv8jw0s", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Hi-all.json index cb184a432a..c1e482601d 100644 --- a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Creality Hi-all", - "inherits": "Generic PLA @Creality Hi-all", "renamed_from": "Creality Generic PLA High Speed @Hi-all;Creality Generic PLA High Speed Hi-all", + "inherits": "Generic PLA @Creality Hi-all", "from": "system", "setting_id": "KJZ1ztg3jL2Cg4fi", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K1-all.json index c7b2bbb03a..26b8cb5669 100644 --- a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Creality K1-all", - "inherits": "Generic PLA @Creality K1-all", "renamed_from": "Creality Generic PLA High Speed @K1-all;Creality Generic PLA High Speed K1-all", + "inherits": "Generic PLA @Creality K1-all", "from": "system", "setting_id": "5HgGIzGuma2z6vD8", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K2-all.json b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K2-all.json index 9df651b17d..66d24a636e 100644 --- a/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA High Speed @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Creality K2-all", - "inherits": "Generic PLA @Creality K2-all", "renamed_from": "Creality Generic PLA High Speed @K2-all;Creality Generic PLA High Speed K2-all", + "inherits": "Generic PLA @Creality K2-all", "from": "system", "setting_id": "Lxp4EwuEZKFHZXWR", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Creality/filament/Generic PLA Matte @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic PLA Matte @Creality Ender-3V3-all.json index 2e561af6b5..660cc0a00d 100644 --- a/resources/profiles/Creality/filament/Generic PLA Matte @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Matte @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Matte @Creality Ender-3V3-all", - "inherits": "Generic PLA @Creality Ender-3V3-all", "renamed_from": "Creality Generic PLA Matte @Ender-3V3-all;Creality Generic PLA Matte Ender-3V3-all", + "inherits": "Generic PLA @Creality Ender-3V3-all", "from": "system", "setting_id": "JlvUB8GxzpAOlgkz", "filament_id": "OFmY0l6t", diff --git a/resources/profiles/Creality/filament/Generic PLA Matte @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PLA Matte @Creality Hi-all.json index 1cff84c8bf..8d2d699ae6 100644 --- a/resources/profiles/Creality/filament/Generic PLA Matte @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Matte @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Matte @Creality Hi-all", - "inherits": "Generic PLA @Creality Hi-all", "renamed_from": "Creality Generic PLA Matte @Hi-all;Creality Generic PLA Matte Hi-all", + "inherits": "Generic PLA @Creality Hi-all", "from": "system", "setting_id": "pFxJgjam0WAeSKqf", "filament_id": "OFmY0l6t", diff --git a/resources/profiles/Creality/filament/Generic PLA Matte @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PLA Matte @Creality K1-all.json index 2a584450f8..77249010d5 100644 --- a/resources/profiles/Creality/filament/Generic PLA Matte @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Matte @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Matte @Creality K1-all", - "inherits": "Generic PLA @Creality K1-all", "renamed_from": "Creality Generic PLA Matte @K1-all;Creality Generic PLA Matte K1-all", + "inherits": "Generic PLA @Creality K1-all", "from": "system", "setting_id": "JJRpJQcHUhelwD02", "filament_id": "OFmY0l6t", diff --git a/resources/profiles/Creality/filament/Generic PLA Matte @Creality K2-all.json b/resources/profiles/Creality/filament/Generic PLA Matte @Creality K2-all.json index 27607938a5..373a18ac1b 100644 --- a/resources/profiles/Creality/filament/Generic PLA Matte @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Matte @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Matte @Creality K2-all", - "inherits": "Generic PLA @Creality K2-all", "renamed_from": "Creality Generic PLA Matte @K2-all;Creality Generic PLA Matte K2-all", + "inherits": "Generic PLA @Creality K2-all", "from": "system", "setting_id": "VVcXNl0Y6B0mLlrb", "filament_id": "OFmY0l6t", diff --git a/resources/profiles/Creality/filament/Generic PLA Silk @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic PLA Silk @Creality Ender-3V3-all.json index 1f528f79fb..d3c281ca9e 100644 --- a/resources/profiles/Creality/filament/Generic PLA Silk @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Silk @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Creality Ender-3V3-all", - "inherits": "Generic PLA @Creality Ender-3V3-all", "renamed_from": "Creality Generic PLA Silk @Ender-3V3-all;Creality Generic PLA Silk Ender-3V3-all", + "inherits": "Generic PLA @Creality Ender-3V3-all", "from": "system", "setting_id": "vPrmBiuBCC8843Jb", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Creality/filament/Generic PLA Silk @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PLA Silk @Creality Hi-all.json index 3358b98c75..3dd93ed1e9 100644 --- a/resources/profiles/Creality/filament/Generic PLA Silk @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Silk @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Creality Hi-all", - "inherits": "Generic PLA @Creality Hi-all", "renamed_from": "Creality Generic PLA Silk @Hi-all;Creality Generic PLA Silk Hi-all", + "inherits": "Generic PLA @Creality Hi-all", "from": "system", "setting_id": "k1ofgUXqhHGSPDPY", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Creality/filament/Generic PLA Silk @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PLA Silk @Creality K1-all.json index 4e8adb2b35..947f98b81c 100644 --- a/resources/profiles/Creality/filament/Generic PLA Silk @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Silk @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Creality K1-all", - "inherits": "Generic PLA @Creality K1-all", "renamed_from": "Creality Generic PLA Silk @K1-all;Creality Generic PLA Silk K1-all", + "inherits": "Generic PLA @Creality K1-all", "from": "system", "setting_id": "JcSq9nar8x5BjFss", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Creality/filament/Generic PLA Silk @Creality K2-all.json b/resources/profiles/Creality/filament/Generic PLA Silk @Creality K2-all.json index 850ea2704b..aa2de4a0bc 100644 --- a/resources/profiles/Creality/filament/Generic PLA Silk @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Silk @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Creality K2-all", - "inherits": "Generic PLA @Creality K2-all", "renamed_from": "Creality Generic PLA Silk @K2-all;Creality Generic PLA Silk K2-all", + "inherits": "Generic PLA @Creality K2-all", "from": "system", "setting_id": "fRyhLWAQiCOaAxKA", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Creality/filament/Generic PLA Wood @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PLA Wood @Creality Hi-all.json index 62f6ddf42c..d42115e997 100644 --- a/resources/profiles/Creality/filament/Generic PLA Wood @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA Wood @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Wood @Creality Hi-all", - "inherits": "Generic PLA @Creality Hi-all", "renamed_from": "Creality Generic PLA Wood @Hi-all;Creality Generic PLA Wood Hi-all", + "inherits": "Generic PLA @Creality Hi-all", "from": "system", "setting_id": "PNqfF5ecYqqpobdh", "filament_id": "OFIKZxPF", diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @Creality Hi-all.json index 9bbc7a4433..20e6b62344 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Creality Hi-all", - "inherits": "Generic PLA-CF @Creality", "renamed_from": "Creality Generic PLA-CF @Hi-all;Creality Generic PLA-CF Hi-all", + "inherits": "Generic PLA-CF @Creality", "from": "system", "setting_id": "MH2pm9wTHLgX9fyq", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @Creality K1-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @Creality K1-all.json index 2e3ed94cb7..5ff14bf8fd 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Creality K1-all", - "inherits": "Generic PLA-CF @Creality", "renamed_from": "Creality Generic PLA-CF @K1-all;Creality Generic PLA-CF K1-all", + "inherits": "Generic PLA-CF @Creality", "from": "system", "setting_id": "DoyvqW51z3o1vBSa", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @Creality K2-all.json b/resources/profiles/Creality/filament/Generic PLA-CF @Creality K2-all.json index 4cc99c0ff5..e910381ac8 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Creality K2-all", - "inherits": "Generic PLA-CF @Creality", "renamed_from": "Creality Generic PLA-CF @K2-all;Creality Generic PLA-CF K2-all", + "inherits": "Generic PLA-CF @Creality", "from": "system", "setting_id": "6KqkLBBYBA59h5TA", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic PLA-CF @Creality.json b/resources/profiles/Creality/filament/Generic PLA-CF @Creality.json index e35a839035..b18e953e9b 100644 --- a/resources/profiles/Creality/filament/Generic PLA-CF @Creality.json +++ b/resources/profiles/Creality/filament/Generic PLA-CF @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Creality", - "inherits": "fdm_filament_pla", "renamed_from": "Creality Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "Fn5Z3ccrrRYFkiwT", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Creality/filament/Generic Speed PLA @Creality HF.json b/resources/profiles/Creality/filament/Generic Speed PLA @Creality HF.json index 80e07cfff0..b9f4ef02b3 100644 --- a/resources/profiles/Creality/filament/Generic Speed PLA @Creality HF.json +++ b/resources/profiles/Creality/filament/Generic Speed PLA @Creality HF.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic Speed PLA @Creality HF", - "inherits": "fdm_filament_pla", "renamed_from": "Creality HF Generic Speed PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "pklu1YSwmDOj6gRq", "filament_id": "OFXmv5p0", diff --git a/resources/profiles/Creality/filament/Generic TPU @Creality Ender-3V3-all.json b/resources/profiles/Creality/filament/Generic TPU @Creality Ender-3V3-all.json index 80d3316a76..9ccaba5c4b 100644 --- a/resources/profiles/Creality/filament/Generic TPU @Creality Ender-3V3-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @Creality Ender-3V3-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Creality Ender-3V3-all", - "inherits": "Generic TPU @Creality", "renamed_from": "Creality Generic TPU @Ender-3V3-all;Creality Generic TPU Ender-3V3-all", + "inherits": "Generic TPU @Creality", "from": "system", "setting_id": "ZufJdJseoFNQC66B", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic TPU @Creality Hi-all.json b/resources/profiles/Creality/filament/Generic TPU @Creality Hi-all.json index 1a46bfc0b5..c53515566a 100644 --- a/resources/profiles/Creality/filament/Generic TPU @Creality Hi-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @Creality Hi-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Creality Hi-all", - "inherits": "Generic TPU @Creality", "renamed_from": "Creality Generic TPU @Hi-all;Creality Generic TPU Hi-all", + "inherits": "Generic TPU @Creality", "from": "system", "setting_id": "P42mcGCETNdcZchS", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic TPU @Creality K1-all.json b/resources/profiles/Creality/filament/Generic TPU @Creality K1-all.json index d2cd19bb7c..5474080ad8 100644 --- a/resources/profiles/Creality/filament/Generic TPU @Creality K1-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @Creality K1-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Creality K1-all", - "inherits": "Generic TPU @Creality", "renamed_from": "Creality Generic TPU @K1-all;Creality Generic TPU K1-all", + "inherits": "Generic TPU @Creality", "from": "system", "setting_id": "7zTgnS8bIEkkhqtB", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic TPU @Creality K2-all.json b/resources/profiles/Creality/filament/Generic TPU @Creality K2-all.json index 9a8896ea23..f1d34a4ec7 100644 --- a/resources/profiles/Creality/filament/Generic TPU @Creality K2-all.json +++ b/resources/profiles/Creality/filament/Generic TPU @Creality K2-all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Creality K2-all", - "inherits": "Generic TPU @Creality", "renamed_from": "Creality Generic TPU @K2-all;Creality Generic TPU K2-all", + "inherits": "Generic TPU @Creality", "from": "system", "setting_id": "C9PAmCIDhCAthMuK", "instantiation": "true", diff --git a/resources/profiles/Creality/filament/Generic TPU @Creality.json b/resources/profiles/Creality/filament/Generic TPU @Creality.json index af863c3893..9edbfc1265 100644 --- a/resources/profiles/Creality/filament/Generic TPU @Creality.json +++ b/resources/profiles/Creality/filament/Generic TPU @Creality.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Creality", - "inherits": "fdm_filament_tpu", "renamed_from": "Creality Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "eCzlxPg3piTZEui4", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json b/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json index 6aadd53bf2..35490b244a 100644 --- a/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json @@ -58,7 +58,7 @@ "0" ], "filament_max_volumetric_speed": [ - "10" + "14" ], "filament_minimal_purge_on_wipe_tower": [ "15" diff --git a/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json index 18a4380b95..6080aee780 100644 --- a/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json @@ -40,7 +40,7 @@ "40" ], "filament_cost": [ - "24.99" + "25" ], "filament_density": [ "1.28" @@ -52,13 +52,13 @@ "0" ], "filament_max_volumetric_speed": [ - "18" + "23" ], "filament_retract_before_wipe": [ "100" ], "filament_retraction_length": [ - "0.8" + "1.2" ], "filament_type": [ "PETG" @@ -97,7 +97,7 @@ "20" ], "temperature_vitrification": [ - "74.3" + "75" ], "textured_plate_temp": [ "70" @@ -136,7 +136,7 @@ "filament_unloading_speed": "90", "filament_unloading_speed_start": "100", "material_flow_dependent_temperature": "0", - "pressure_advance": "0.07", + "pressure_advance": "0.05", "support_material_interface_fan_speed": "-1", "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", diff --git a/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json b/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json index a56f03f226..4f7e0130f6 100644 --- a/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json @@ -31,7 +31,7 @@ "50" ], "filament_cost": [ - "30" + "20" ], "filament_deretraction_speed": [ "nil" @@ -46,7 +46,7 @@ "0" ], "filament_max_volumetric_speed": [ - "21" + "23" ], "filament_minimal_purge_on_wipe_tower": [ "15" @@ -146,7 +146,7 @@ "filament_unloading_speed_start": "100", "material_flow_dependent_temperature": "0", "material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]", - "pressure_advance": "0.04", + "pressure_advance": "0.044", "support_material_interface_fan_speed": "-1", "compatible_printers": [ "Creality K2 Plus 0.2 nozzle", diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 KE-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 KE-all.json index 0df433e3db..48af68fefe 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 KE-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 KE-all.json @@ -1,120 +1,120 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @Ender-3 V3 KE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "eQu3UILWB8OQPf1X", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_max_volumetric_speed": [ - "9" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_retraction_length": [ - "0.8" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "1" - ], - "filament_z_hop": [ - "0.4" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "chamber_temperature": "35", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[1.0,230],[1.2,230],[1.3,240]]", - "pressure_advance": "0.09", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality Ender-3 V3 KE 0.4 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @Ender-3 V3 KE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "eQu3UILWB8OQPf1X", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_max_volumetric_speed": [ + "9" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_retraction_length": [ + "0.8" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "1" + ], + "filament_z_hop": [ + "0.4" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "chamber_temperature": "35", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[1.0,230],[1.2,230],[1.3,240]]", + "pressure_advance": "0.09", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality Ender-3 V3 KE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 Plus-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 Plus-all.json index cfcaf8dcd4..f6942dfe46 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 Plus-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 Plus-all.json @@ -1,122 +1,122 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @Ender-3 V3 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "uYReKb57FZWbcn66", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "1" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "14" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "chamber_temperature": "35", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,240]]", - "pressure_advance": "0.076", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality Ender-3 V3 Plus 0.4 nozzle", - "Creality Ender-3 V3 Plus 0.6 nozzle", - "Creality Ender-3 V3 Plus 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @Ender-3 V3 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "uYReKb57FZWbcn66", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "1" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "14" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "chamber_temperature": "35", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,240]]", + "pressure_advance": "0.076", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality Ender-3 V3 Plus 0.4 nozzle", + "Creality Ender-3 V3 Plus 0.6 nozzle", + "Creality Ender-3 V3 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 SE-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 SE-all.json index 07826b7931..3d934dc95b 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 SE-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3 SE-all.json @@ -1,105 +1,105 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @Ender-3 V3 SE-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "IkpZHqKxz3D4DM8n", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "chamber_temperature": "35", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,240]]", - "pressure_advance": "0.02", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality Ender-3 V3 SE 0.4 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @Ender-3 V3 SE-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "IkpZHqKxz3D4DM8n", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "chamber_temperature": "35", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,240]]", + "pressure_advance": "0.02", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality Ender-3 V3 SE 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3-all.json index 6cb9b5389d..ba387ef37f 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @Ender-3 V3-all.json @@ -1,119 +1,119 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @Ender-3 V3-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "VFPEq8OL7ibFlpNn", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "80" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "1.5" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "240" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "14" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "chamber_temperature": "35", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,240]]", - "pressure_advance": "0.076", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality Ender-3 V3 0.4 nozzle", - "Creality Ender-3 V3 0.6 nozzle", - "Creality Ender-3 V3 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @Ender-3 V3-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "VFPEq8OL7ibFlpNn", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "80" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "1.5" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "14" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "chamber_temperature": "35", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.5,220],[1.0,220],[1.2,240]]", + "pressure_advance": "0.076", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality Ender-3 V3 0.4 nozzle", + "Creality Ender-3 V3 0.6 nozzle", + "Creality Ender-3 V3 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @Hi-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @Hi-all.json index 1e77a28ccf..06a6706eeb 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @Hi-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @Hi-all.json @@ -1,127 +1,127 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @Hi-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "sUalM5HH0sDpMOmD", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "60" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.96" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.6,220],[1.4,220],[1.7,250]]", - "pressure_advance": "0.06", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality Hi 0.4 nozzle", - "Creality Hi 0.6 nozzle", - "Creality Hi 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @Hi-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "sUalM5HH0sDpMOmD", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.6,220],[1.4,220],[1.7,250]]", + "pressure_advance": "0.06", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality Hi 0.4 nozzle", + "Creality Hi 0.6 nozzle", + "Creality Hi 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @K1C-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @K1C-all.json index 626d34362d..267939fa6b 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @K1C-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @K1C-all.json @@ -1,130 +1,130 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @K1C-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "RHcExN6yUArn3nky", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "60" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "30" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retraction_length": [ - "0.4" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "30" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", - "pressure_advance": "0.054", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K1C 0.4 nozzle", - "Creality K1C 0.6 nozzle", - "Creality K1C 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @K1C-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "RHcExN6yUArn3nky", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "60" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "30" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "30" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.8,220], [1.2,220], [1.3,250]]", + "pressure_advance": "0.054", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K1C 0.4 nozzle", + "Creality K1C 0.6 nozzle", + "Creality K1C 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Plus-all.json index 8d1dc8a1c0..35ffc576d4 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Plus-all.json @@ -1,132 +1,132 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "w8SHt6Slm8uIqTbh", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.5,230],[1.2,230],[1.2,250]]", - "pressure_advance": "0.074", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle", - "Creality K2 Plus 0.6 nozzle", - "Creality K2 Plus 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "w8SHt6Slm8uIqTbh", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.5,230],[1.2,230],[1.2,250]]", + "pressure_advance": "0.074", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle", + "Creality K2 Plus 0.6 nozzle", + "Creality K2 Plus 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Pro-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Pro-all.json index fca00e01ab..c2d411ef34 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Pro-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @K2 Pro-all.json @@ -1,132 +1,132 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @K2 Pro-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "vI7ThHCwOBfts0NQ", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", - "pressure_advance": "0.08", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 Pro 0.4 nozzle", - "Creality K2 Pro 0.6 nozzle", - "Creality K2 Pro 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @K2 Pro-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "vI7ThHCwOBfts0NQ", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.5,220],[1.2,220],[1.2,250]]", + "pressure_advance": "0.08", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 Pro 0.4 nozzle", + "Creality K2 Pro 0.6 nozzle", + "Creality K2 Pro 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @K2-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @K2-all.json index da86d9e27e..c244600091 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @K2-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @K2-all.json @@ -1,132 +1,132 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @K2-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "nqr9TMlkS8nLVGhG", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "80" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "activate_chamber_temp_control": "1", - "chamber_temperature": "35", - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.5,230],[1.2,230],[1.2,250]]", - "pressure_advance": "0.08", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 0.4 nozzle", - "Creality K2 0.6 nozzle", - "Creality K2 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @K2-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "nqr9TMlkS8nLVGhG", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "80" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "activate_chamber_temp_control": "1", + "chamber_temperature": "35", + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.5,230],[1.2,230],[1.2,250]]", + "pressure_advance": "0.08", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 0.4 nozzle", + "Creality K2 0.6 nozzle", + "Creality K2 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @SPARKX i7-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @SPARKX i7-all.json index 79b83b8e69..b3b56aab4b 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @SPARKX i7-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @SPARKX i7-all.json @@ -1,122 +1,122 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @SPARKX i7-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "yWR45TQhsN5eYgCu", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "80" - ], - "cool_plate_temp_initial_layer": [ - "80" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "80" - ], - "eng_plate_temp_initial_layer": [ - "80" - ], - "fan_cooling_layer_time": [ - "80" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_retract_before_wipe": [ - "100%" - ], - "filament_retraction_minimum_travel": [ - "2" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "hot_plate_temp": [ - "80" - ], - "hot_plate_temp_initial_layer": [ - "80" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "14" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "90" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ], - "customized_plate_temp": "80", - "customized_plate_temp_initial_layer": "80", - "enable_pressure_advance": "1", - "epoxy_resin_plate_temp": "70", - "epoxy_resin_plate_temp_initial_layer": "70", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.6,240],[1.2,250]]", - "pressure_advance": "0.054", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality SPARKX i7 0.4 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @SPARKX i7-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "yWR45TQhsN5eYgCu", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_retract_before_wipe": [ + "100%" + ], + "filament_retraction_minimum_travel": [ + "2" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "14" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "90" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "customized_plate_temp": "80", + "customized_plate_temp_initial_layer": "80", + "enable_pressure_advance": "1", + "epoxy_resin_plate_temp": "70", + "epoxy_resin_plate_temp_initial_layer": "70", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.6,240],[1.2,250]]", + "pressure_advance": "0.054", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality SPARKX i7 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/Soleyin Basic PETG @Sermoon M300-all.json b/resources/profiles/Creality/filament/Soleyin Basic PETG @Sermoon M300-all.json index ee7263427c..52f0f070bb 100644 --- a/resources/profiles/Creality/filament/Soleyin Basic PETG @Sermoon M300-all.json +++ b/resources/profiles/Creality/filament/Soleyin Basic PETG @Sermoon M300-all.json @@ -1,124 +1,124 @@ { - "type": "filament", - "name": "Soleyin Basic PETG @Sermoon M300-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "oKRNh6oI0CNy6guE", - "instantiation": "true", - "complete_print_exhaust_fan_speed": [ - "0" - ], - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "15.9" - ], - "filament_density": [ - "1.25" - ], - "filament_deretraction_speed": [ - "40" - ], - "filament_flow_ratio": [ - "0.97" - ], - "filament_max_volumetric_speed": [ - "16" - ], - "filament_retract_before_wipe": [ - "90%" - ], - "filament_retraction_minimum_travel": [ - "1" - ], - "filament_retraction_speed": [ - "40" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "Creality" - ], - "filament_wipe_distance": [ - "2" - ], - "filament_z_hop_types": [ - "Slope Lift" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "nozzle_temperature_range_low": [ - "220" - ], - "overhang_fan_speed": [ - "80" - ], - "overhang_fan_threshold": [ - "25%" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "enable_pressure_advance": "0", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "filament_retract_lift_above": "nil", - "filament_retract_lift_below": "nil", - "filament_retract_lift_enforce": "nil", - "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]", - "pressure_advance": "0.075", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality Sermoon M300 0.4 nozzle", - "Creality Sermoon M300 0.6 nozzle", - "Creality Sermoon M300 0.8 nozzle" - ], - "filament_id": "OFBLktDy" -} \ No newline at end of file + "type": "filament", + "name": "Soleyin Basic PETG @Sermoon M300-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "oKRNh6oI0CNy6guE", + "filament_id": "OFBLktDy", + "instantiation": "true", + "complete_print_exhaust_fan_speed": [ + "0" + ], + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "during_print_exhaust_fan_speed": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "15.9" + ], + "filament_density": [ + "1.25" + ], + "filament_deretraction_speed": [ + "40" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_retract_before_wipe": [ + "90%" + ], + "filament_retraction_minimum_travel": [ + "1" + ], + "filament_retraction_speed": [ + "40" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Creality" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_z_hop_types": [ + "Slope Lift" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_speed": [ + "80" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "enable_pressure_advance": "0", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "filament_retract_lift_above": "nil", + "filament_retract_lift_below": "nil", + "filament_retract_lift_enforce": "nil", + "material_flow_temp_graph": "[[0.5,230],[1.0,230],[1.2,250]]", + "pressure_advance": "0.075", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality Sermoon M300 0.4 nozzle", + "Creality Sermoon M300 0.6 nozzle", + "Creality Sermoon M300 0.8 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PETG @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PETG @K2 Plus-all.json index 745ca87011..dfc4bb69a7 100644 --- a/resources/profiles/Creality/filament/eSUN PETG @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PETG @K2 Plus-all.json @@ -1,87 +1,87 @@ { - "type": "filament", - "name": "eSUN PETG @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "BHCutIIr9w5Lg1DM", - "instantiation": "true", - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "5" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "eSUN" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "255" - ], - "nozzle_temperature_initial_layer": [ - "255" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "pressure_advance": "0.1", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OF3kBrdA" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PETG @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "BHCutIIr9w5Lg1DM", + "filament_id": "OF3kBrdA", + "instantiation": "true", + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "5" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "eSUN" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "pressure_advance": "0.1", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PETG+HS @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PETG+HS @K2 Plus-all.json index db95688083..8862af8bdf 100644 --- a/resources/profiles/Creality/filament/eSUN PETG+HS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PETG+HS @K2 Plus-all.json @@ -1,84 +1,84 @@ { - "type": "filament", - "name": "eSUN PETG+HS @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "2hnUQwzB9vx9ZUOG", - "instantiation": "true", - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.26" - ], - "filament_max_volumetric_speed": [ - "7" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "eSUN" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "pressure_advance": "0.1", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFrdZ0cK" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PETG+HS @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "2hnUQwzB9vx9ZUOG", + "filament_id": "OFrdZ0cK", + "instantiation": "true", + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.26" + ], + "filament_max_volumetric_speed": [ + "7" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "eSUN" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "pressure_advance": "0.1", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PETG-Basic @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PETG-Basic @K2 Plus-all.json index 4885eb89a0..df6a63898a 100644 --- a/resources/profiles/Creality/filament/eSUN PETG-Basic @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PETG-Basic @K2 Plus-all.json @@ -1,87 +1,87 @@ { - "type": "filament", - "name": "eSUN PETG-Basic @K2 Plus-all", - "inherits": "fdm_filament_petg", - "from": "system", - "setting_id": "YxOoppTAD5GAFwyM", - "instantiation": "true", - "cool_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ - "40" - ], - "filament_cost": [ - "22" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "8" - ], - "filament_retract_before_wipe": [ - "70%" - ], - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "eSUN" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "250" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "overhang_fan_speed": [ - "90" - ], - "overhang_fan_threshold": [ - "25%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "customized_plate_temp": "70", - "customized_plate_temp_initial_layer": "70", - "epoxy_resin_plate_temp": "60", - "epoxy_resin_plate_temp_initial_layer": "60", - "pressure_advance": "0.1", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFFbQscs" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PETG-Basic @K2 Plus-all", + "inherits": "fdm_filament_petg", + "from": "system", + "setting_id": "YxOoppTAD5GAFwyM", + "filament_id": "OFFbQscs", + "instantiation": "true", + "cool_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "22" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_retract_before_wipe": [ + "70%" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "eSUN" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "customized_plate_temp": "70", + "customized_plate_temp_initial_layer": "70", + "epoxy_resin_plate_temp": "60", + "epoxy_resin_plate_temp_initial_layer": "60", + "pressure_advance": "0.1", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PLA-CF @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-CF @K2 Plus-all.json index e76dc3d1fa..11b8d9448e 100644 --- a/resources/profiles/Creality/filament/eSUN PLA-CF @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PLA-CF @K2 Plus-all.json @@ -1,78 +1,78 @@ { - "type": "filament", - "name": "eSUN PLA-CF @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "DYF2ppm40yQWEtnp", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "28" - ], - "filament_density": [ - "1.21" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "11" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_type": [ - "PLA-CF" - ], - "filament_vendor": [ - "eSUN" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "pressure_advance": "0.04", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFnHc3D6" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PLA-CF @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "DYF2ppm40yQWEtnp", + "filament_id": "OFnHc3D6", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "28" + ], + "filament_density": [ + "1.21" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "11" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_type": [ + "PLA-CF" + ], + "filament_vendor": [ + "eSUN" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "pressure_advance": "0.04", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/eSUN PLA-HS @K2 Plus-all.json b/resources/profiles/Creality/filament/eSUN PLA-HS @K2 Plus-all.json index 0c540de90b..5acf20e255 100644 --- a/resources/profiles/Creality/filament/eSUN PLA-HS @K2 Plus-all.json +++ b/resources/profiles/Creality/filament/eSUN PLA-HS @K2 Plus-all.json @@ -1,69 +1,69 @@ { - "type": "filament", - "name": "eSUN PLA-HS @K2 Plus-all", - "inherits": "fdm_filament_pla", - "from": "system", - "setting_id": "lJaXWbmrBmg87yhI", - "instantiation": "true", - "additional_cooling_fan_speed": [ - "80" - ], - "cool_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "50" - ], - "filament_cost": [ - "25" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_retract_before_wipe": [ - "100" - ], - "filament_retraction_length": [ - "1.2" - ], - "filament_vendor": [ - "eSUN" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "20" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" - ], - "customized_plate_temp": "50", - "customized_plate_temp_initial_layer": "50", - "epoxy_resin_plate_temp": "40", - "epoxy_resin_plate_temp_initial_layer": "40", - "pressure_advance": "0.04", - "default_filament_colour": "\"\"", - "compatible_printers": [ - "Creality K2 Plus 0.4 nozzle" - ], - "filament_id": "OFOHOf2F" -} \ No newline at end of file + "type": "filament", + "name": "eSUN PLA-HS @K2 Plus-all", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "lJaXWbmrBmg87yhI", + "filament_id": "OFOHOf2F", + "instantiation": "true", + "additional_cooling_fan_speed": [ + "80" + ], + "cool_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "50" + ], + "filament_cost": [ + "25" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_retract_before_wipe": [ + "100" + ], + "filament_retraction_length": [ + "1.2" + ], + "filament_vendor": [ + "eSUN" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (layer_z > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}" + ], + "customized_plate_temp": "50", + "customized_plate_temp_initial_layer": "50", + "epoxy_resin_plate_temp": "40", + "epoxy_resin_plate_temp_initial_layer": "40", + "pressure_advance": "0.04", + "default_filament_colour": "\"\"", + "compatible_printers": [ + "Creality K2 Plus 0.4 nozzle" + ] +} diff --git a/resources/profiles/Creality/filament/fdm_filament_hips.json b/resources/profiles/Creality/filament/fdm_filament_hips.json index c1de1560e8..a65b1977b9 100644 --- a/resources/profiles/Creality/filament/fdm_filament_hips.json +++ b/resources/profiles/Creality/filament/fdm_filament_hips.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "fdm_filament_hips", + "from": "system", "instantiation": "false", "close_fan_the_first_x_layers": [ "3" @@ -137,7 +138,6 @@ "filament_end_gcode": [ "; filament end gcode \n" ], - "from": "system", "filament_adhesiveness_category": [ "798" ], diff --git a/resources/profiles/Creality/filament/fdm_filament_petg.json b/resources/profiles/Creality/filament/fdm_filament_petg.json index c99fcf9b4e..0dcde20293 100644 --- a/resources/profiles/Creality/filament/fdm_filament_petg.json +++ b/resources/profiles/Creality/filament/fdm_filament_petg.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "fdm_filament_petg", + "from": "system", "instantiation": "false", "close_fan_the_first_x_layers": [ "3" @@ -137,7 +138,6 @@ "filament_end_gcode": [ "; filament end gcode \n" ], - "from": "system", "filament_adhesiveness_category": [ "300" ], diff --git a/resources/profiles/Creality/filament/fdm_filament_pp.json b/resources/profiles/Creality/filament/fdm_filament_pp.json index 6568654ba3..0624152b80 100644 --- a/resources/profiles/Creality/filament/fdm_filament_pp.json +++ b/resources/profiles/Creality/filament/fdm_filament_pp.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "fdm_filament_pp", + "from": "system", "instantiation": "false", "close_fan_the_first_x_layers": [ "3" @@ -137,7 +138,6 @@ "filament_end_gcode": [ "; filament end gcode \n" ], - "from": "system", "filament_adhesiveness_category": [ "902" ], diff --git a/resources/profiles/Creality/filament/fdm_filament_pps.json b/resources/profiles/Creality/filament/fdm_filament_pps.json index 65be9d03f6..62be4e2d2b 100644 --- a/resources/profiles/Creality/filament/fdm_filament_pps.json +++ b/resources/profiles/Creality/filament/fdm_filament_pps.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "fdm_filament_pps", + "from": "system", "instantiation": "false", "close_fan_the_first_x_layers": [ "3" @@ -137,7 +138,6 @@ "filament_end_gcode": [ "; filament end gcode \n" ], - "from": "system", "filament_adhesiveness_category": [ "801" ], diff --git a/resources/profiles/Creality/filament/fdm_filament_pva.json b/resources/profiles/Creality/filament/fdm_filament_pva.json index ab1694031f..c0101e0c81 100644 --- a/resources/profiles/Creality/filament/fdm_filament_pva.json +++ b/resources/profiles/Creality/filament/fdm_filament_pva.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "fdm_filament_pva", + "from": "system", "instantiation": "false", "close_fan_the_first_x_layers": [ "3" @@ -137,7 +138,6 @@ "filament_end_gcode": [ "; filament end gcode \n" ], - "from": "system", "filament_adhesiveness_category": [ "704" ], diff --git a/resources/profiles/Creality/machine/Creality CR-10 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 0.4 nozzle.json index 5da636490c..014578b914 100644 --- a/resources/profiles/Creality/machine/Creality CR-10 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality CR-10 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit
\nG1 E-2 Z1 F2400 ;Retract and raise Z
\nG1 X5 Y5 F3000 ;Wipe out
\nG1 Z10 ;Raise Z more
\nG90 ;Absolute positionning

\nG1 X0 Y0 ;Present print
\nM106 S0 ;Turn-off fan
\nM104 S0 ;Turn-off hotend
\nM140 S0 ;Turn-off bed

\nM84 X Y E ;Disable all steppers but Z
", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000,5000", - "machine_max_acceleration_extruding": "500,500", - "machine_max_acceleration_retracting": "500,1000", - "machine_max_acceleration_travel": "500,500", - "machine_max_acceleration_x": "500,500", - "machine_max_acceleration_y": "500,500", - "machine_max_acceleration_z": "500,500", - "machine_max_jerk_e": "5,5", - "machine_max_jerk_x": "10,8", - "machine_max_jerk_y": "10,8", - "machine_max_jerk_z": "0.4,0.4", - "machine_max_speed_e": "50,60", - "machine_max_speed_x": "500,500", - "machine_max_speed_y": "500,500", - "machine_max_speed_z": "10,10", + "machine_max_acceleration_e": ["5000,5000", "5000,5000"], + "machine_max_acceleration_extruding": ["500,500", "500,500"], + "machine_max_acceleration_retracting": ["500,1000", "500,1000"], + "machine_max_acceleration_travel": ["500,500", "500,500"], + "machine_max_acceleration_x": ["500,500", "500,500"], + "machine_max_acceleration_y": ["500,500", "500,500"], + "machine_max_acceleration_z": ["500,500", "500,500"], + "machine_max_jerk_e": ["5,5", "5,5"], + "machine_max_jerk_x": ["10,8", "10,8"], + "machine_max_jerk_y": ["10,8", "10,8"], + "machine_max_jerk_z": ["0.4,0.4", "0.4,0.4"], + "machine_max_speed_e": ["50,60", "50,60"], + "machine_max_speed_x": ["500,500", "500,500"], + "machine_max_speed_y": ["500,500", "500,500"], + "machine_max_speed_z": ["10,10", "10,10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Creality/machine/Creality CR-10 Smart 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 Smart 0.4 nozzle.json index f7d9b8167e..70c7b43293 100644 --- a/resources/profiles/Creality/machine/Creality CR-10 Smart 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality CR-10 Smart 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit
\nG1 E-2 Z1 F2400 ;Retract and raise Z
\nG1 X5 Y5 F3000 ;Wipe out
\nG1 Z10 ;Raise Z more
\nG90 ;Absolute positionning

\nG1 X0 Y0 ;Present print
\nM106 S0 ;Turn-off fan
\nM104 S0 ;Turn-off hotend
\nM140 S0 ;Turn-off bed

\nM84 X Y E ;Disable all steppers but Z
", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000,5000", - "machine_max_acceleration_extruding": "500,500", - "machine_max_acceleration_retracting": "500,1000", - "machine_max_acceleration_travel": "500,500", - "machine_max_acceleration_x": "500,500", - "machine_max_acceleration_y": "500,500", - "machine_max_acceleration_z": "500,500", - "machine_max_jerk_e": "5,5", - "machine_max_jerk_x": "10,8", - "machine_max_jerk_y": "10,8", - "machine_max_jerk_z": "0.4,0.4", - "machine_max_speed_e": "50,60", - "machine_max_speed_x": "500,500", - "machine_max_speed_y": "500,500", - "machine_max_speed_z": "10,10", + "machine_max_acceleration_e": ["5000,5000", "5000,5000"], + "machine_max_acceleration_extruding": ["500,500", "500,500"], + "machine_max_acceleration_retracting": ["500,1000", "500,1000"], + "machine_max_acceleration_travel": ["500,500", "500,500"], + "machine_max_acceleration_x": ["500,500", "500,500"], + "machine_max_acceleration_y": ["500,500", "500,500"], + "machine_max_acceleration_z": ["500,500", "500,500"], + "machine_max_jerk_e": ["5,5", "5,5"], + "machine_max_jerk_x": ["10,8", "10,8"], + "machine_max_jerk_y": ["10,8", "10,8"], + "machine_max_jerk_z": ["0.4,0.4", "0.4,0.4"], + "machine_max_speed_e": ["50,60", "50,60"], + "machine_max_speed_x": ["500,500", "500,500"], + "machine_max_speed_y": ["500,500", "500,500"], + "machine_max_speed_z": ["10,10", "10,10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Creality/machine/Creality CR-10 Smart Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10 Smart Pro 0.4 nozzle.json index c7db2ac74f..3a65d1a6e7 100644 --- a/resources/profiles/Creality/machine/Creality CR-10 Smart Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality CR-10 Smart Pro 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit
\nG1 E-2 Z1 F2400 ;Retract and raise Z
\nG1 X5 Y5 F3000 ;Wipe out
\nG1 Z10 ;Raise Z more
\nG90 ;Absolute positionning

\nG1 X0 Y0 ;Present print
\nM106 S0 ;Turn-off fan
\nM104 S0 ;Turn-off hotend
\nM140 S0 ;Turn-off bed

\nM84 X Y E ;Disable all steppers but Z
", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000,5000", - "machine_max_acceleration_extruding": "500,500", - "machine_max_acceleration_retracting": "500,1000", - "machine_max_acceleration_travel": "500,500", - "machine_max_acceleration_x": "500,500", - "machine_max_acceleration_y": "500,500", - "machine_max_acceleration_z": "500,500", - "machine_max_jerk_e": "5,5", - "machine_max_jerk_x": "10,8", - "machine_max_jerk_y": "10,8", - "machine_max_jerk_z": "0.4,0.4", - "machine_max_speed_e": "50,60", - "machine_max_speed_x": "500,500", - "machine_max_speed_y": "500,500", - "machine_max_speed_z": "10,10", + "machine_max_acceleration_e": ["5000,5000", "5000,5000"], + "machine_max_acceleration_extruding": ["500,500", "500,500"], + "machine_max_acceleration_retracting": ["500,1000", "500,1000"], + "machine_max_acceleration_travel": ["500,500", "500,500"], + "machine_max_acceleration_x": ["500,500", "500,500"], + "machine_max_acceleration_y": ["500,500", "500,500"], + "machine_max_acceleration_z": ["500,500", "500,500"], + "machine_max_jerk_e": ["5,5", "5,5"], + "machine_max_jerk_x": ["10,8", "10,8"], + "machine_max_jerk_y": ["10,8", "10,8"], + "machine_max_jerk_z": ["0.4,0.4", "0.4,0.4"], + "machine_max_speed_e": ["50,60", "50,60"], + "machine_max_speed_x": ["500,500", "500,500"], + "machine_max_speed_y": ["500,500", "500,500"], + "machine_max_speed_z": ["10,10", "10,10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Creality/machine/Creality CR-10S Pro V2 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-10S Pro V2 0.4 nozzle.json index 04fe4b7cfd..cd56ba7dfb 100644 --- a/resources/profiles/Creality/machine/Creality CR-10S Pro V2 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality CR-10S Pro V2 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit
\nG1 E-2 Z1 F2400 ;Retract and raise Z
\nG1 X5 Y5 F3000 ;Wipe out
\nG1 Z10 ;Raise Z more
\nG90 ;Absolute positionning

\nG1 X0 Y0 ;Present print
\nM106 S0 ;Turn-off fan
\nM104 S0 ;Turn-off hotend
\nM140 S0 ;Turn-off bed

\nM84 X Y E ;Disable all steppers but Z
", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000,5000", - "machine_max_acceleration_extruding": "500,500", - "machine_max_acceleration_retracting": "500,1000", - "machine_max_acceleration_travel": "500,500", - "machine_max_acceleration_x": "500,500", - "machine_max_acceleration_y": "500,500", - "machine_max_acceleration_z": "500,500", - "machine_max_jerk_e": "5,5", - "machine_max_jerk_x": "10,8", - "machine_max_jerk_y": "10,8", - "machine_max_jerk_z": "0.4,0.4", - "machine_max_speed_e": "50,60", - "machine_max_speed_x": "500,500", - "machine_max_speed_y": "500,500", - "machine_max_speed_z": "10,10", + "machine_max_acceleration_e": ["5000,5000", "5000,5000"], + "machine_max_acceleration_extruding": ["500,500", "500,500"], + "machine_max_acceleration_retracting": ["500,1000", "500,1000"], + "machine_max_acceleration_travel": ["500,500", "500,500"], + "machine_max_acceleration_x": ["500,500", "500,500"], + "machine_max_acceleration_y": ["500,500", "500,500"], + "machine_max_acceleration_z": ["500,500", "500,500"], + "machine_max_jerk_e": ["5,5", "5,5"], + "machine_max_jerk_x": ["10,8", "10,8"], + "machine_max_jerk_y": ["10,8", "10,8"], + "machine_max_jerk_z": ["0.4,0.4", "0.4,0.4"], + "machine_max_speed_e": ["50,60", "50,60"], + "machine_max_speed_x": ["500,500", "500,500"], + "machine_max_speed_y": ["500,500", "500,500"], + "machine_max_speed_z": ["10,10", "10,10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Creality/machine/Creality CR-20 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-20 Pro 0.4 nozzle.json index 49f85b6acc..9740c97a1a 100644 --- a/resources/profiles/Creality/machine/Creality CR-20 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality CR-20 Pro 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "500", - "machine_max_acceleration_retracting": "500", - "machine_max_acceleration_travel": "500", - "machine_max_acceleration_x": "500", - "machine_max_acceleration_y": "500", - "machine_max_acceleration_z": "100", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "50", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["500", "500"], + "machine_max_acceleration_retracting": ["500", "500"], + "machine_max_acceleration_travel": ["500", "500"], + "machine_max_acceleration_x": ["500", "500"], + "machine_max_acceleration_y": ["500", "500"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Creality/machine/Creality CR-M4 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality CR-M4 SE 0.4 nozzle.json index 1a6ac10bea..ca875c8184 100644 --- a/resources/profiles/Creality/machine/Creality CR-M4 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality CR-M4 SE 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z4.5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "11", - "machine_max_acceleration_e": "8000", - "machine_max_acceleration_extruding": "8000", - "machine_max_acceleration_retracting": "8000", - "machine_max_acceleration_travel": "8000", - "machine_max_acceleration_x": "8000", - "machine_max_acceleration_y": "8000", - "machine_max_acceleration_z": "2000", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "100", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["8000", "8000"], + "machine_max_acceleration_extruding": ["8000", "8000"], + "machine_max_acceleration_retracting": ["8000", "8000"], + "machine_max_acceleration_travel": ["8000", "8000"], + "machine_max_acceleration_x": ["8000", "8000"], + "machine_max_acceleration_y": ["8000", "8000"], + "machine_max_acceleration_z": ["2000", "2000"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Ender-2 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-2 Pro 0.4 nozzle.json index 8aa0ce3cb3..0ca93a00bf 100644 --- a/resources/profiles/Creality/machine/Creality Ender-2 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-2 Pro 0.4 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "500", - "machine_max_acceleration_retracting": "500", - "machine_max_acceleration_travel": "500", - "machine_max_acceleration_x": "500", - "machine_max_acceleration_y": "500", - "machine_max_acceleration_z": "100", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "50", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["500", "500"], + "machine_max_acceleration_retracting": ["500", "500"], + "machine_max_acceleration_travel": ["500", "500"], + "machine_max_acceleration_x": ["500", "500"], + "machine_max_acceleration_y": ["500", "500"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Max 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Max 0.4 nozzle.json index 2c0f280ae7..dd07893bca 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 Max 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 Max 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "500", - "machine_max_acceleration_retracting": "500", - "machine_max_acceleration_travel": "500", - "machine_max_acceleration_x": "500", - "machine_max_acceleration_y": "500", - "machine_max_acceleration_z": "100", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "50", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["500", "500"], + "machine_max_acceleration_retracting": ["500", "500"], + "machine_max_acceleration_travel": ["500", "500"], + "machine_max_acceleration_x": ["500", "500"], + "machine_max_acceleration_y": ["500", "500"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Max Neo 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Max Neo 0.4 nozzle.json index 8db6b4d5cc..88eaf0af7b 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 Max Neo 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 Max Neo 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "500", - "machine_max_acceleration_retracting": "500", - "machine_max_acceleration_travel": "500", - "machine_max_acceleration_x": "500", - "machine_max_acceleration_y": "500", - "machine_max_acceleration_z": "100", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "50", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["500", "500"], + "machine_max_acceleration_retracting": ["500", "500"], + "machine_max_acceleration_travel": ["500", "500"], + "machine_max_acceleration_x": ["500", "500"], + "machine_max_acceleration_y": ["500", "500"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 Neo 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 Neo 0.4 nozzle.json index d401e149e5..4ad35f9bc1 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 Neo 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 Neo 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit
\nG1 E-2 Z1 F2400 ;Retract and raise Z
\nG1 X5 Y5 F3000 ;Wipe out
\nG1 Z10 ;Raise Z more
\nG90 ;Absolute positionning

\nG1 X0 Y0 ;Present print
\nM106 S0 ;Turn-off fan
\nM104 S0 ;Turn-off hotend
\nM140 S0 ;Turn-off bed

\nM84 X Y E ;Disable all steppers but Z
", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000,5000", - "machine_max_acceleration_extruding": "500,500", - "machine_max_acceleration_retracting": "500,1000", - "machine_max_acceleration_travel": "500,500", - "machine_max_acceleration_x": "500,500", - "machine_max_acceleration_y": "500,500", - "machine_max_acceleration_z": "500,500", - "machine_max_jerk_e": "5,5", - "machine_max_jerk_x": "10,8", - "machine_max_jerk_y": "10,8", - "machine_max_jerk_z": "0.4,0.4", - "machine_max_speed_e": "50,60", - "machine_max_speed_x": "500,500", - "machine_max_speed_y": "500,500", - "machine_max_speed_z": "10,10", + "machine_max_acceleration_e": ["5000,5000", "5000,5000"], + "machine_max_acceleration_extruding": ["500,500", "500,500"], + "machine_max_acceleration_retracting": ["500,1000", "500,1000"], + "machine_max_acceleration_travel": ["500,500", "500,500"], + "machine_max_acceleration_x": ["500,500", "500,500"], + "machine_max_acceleration_y": ["500,500", "500,500"], + "machine_max_acceleration_z": ["500,500", "500,500"], + "machine_max_jerk_e": ["5,5", "5,5"], + "machine_max_jerk_x": ["10,8", "10,8"], + "machine_max_jerk_y": ["10,8", "10,8"], + "machine_max_jerk_z": ["0.4,0.4", "0.4,0.4"], + "machine_max_speed_e": ["50,60", "50,60"], + "machine_max_speed_x": ["500,500", "500,500"], + "machine_max_speed_y": ["500,500", "500,500"], + "machine_max_speed_z": ["10,10", "10,10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25 ;pause print", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 S1 Sonic 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 S1 Sonic 0.4 nozzle.json index c0bc21cedf..88a92fadca 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 S1 Sonic 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 S1 Sonic 0.4 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "3000", - "machine_max_acceleration_extruding": "10000", - "machine_max_acceleration_retracting": "3000", - "machine_max_acceleration_travel": "5000", - "machine_max_acceleration_x": "10000", - "machine_max_acceleration_y": "10000", - "machine_max_acceleration_z": "200", - "machine_max_jerk_e": "2.5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "2", - "machine_max_speed_e": "80", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["3000", "3000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["3000", "3000"], + "machine_max_acceleration_travel": ["5000", "5000"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["2", "2"], + "machine_max_speed_e": ["80", "80"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 0.8 nozzle.json index d075f13e04..ff02afcd42 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 0.8 nozzle.json @@ -31,21 +31,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "10000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "2.5", - "machine_max_jerk_x": "50", - "machine_max_jerk_y": "50", - "machine_max_jerk_z": "2", - "machine_max_speed_e": "100", - "machine_max_speed_x": "600", - "machine_max_speed_y": "600", - "machine_max_speed_z": "500", + "machine_max_acceleration_e": ["10000", "10000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["50", "50"], + "machine_max_jerk_y": ["50", "50"], + "machine_max_jerk_z": ["2", "2"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["600", "600"], + "machine_max_speed_y": ["600", "600"], + "machine_max_speed_z": ["500", "500"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE\n", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.8 nozzle.json index 713d45e321..8bc845ee6a 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 Plus 0.8 nozzle.json @@ -32,21 +32,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "10000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "2.5", - "machine_max_jerk_x": "50", - "machine_max_jerk_y": "50", - "machine_max_jerk_z": "2", - "machine_max_speed_e": "100", - "machine_max_speed_x": "600", - "machine_max_speed_y": "600", - "machine_max_speed_z": "500", + "machine_max_acceleration_e": ["10000", "10000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["50", "50"], + "machine_max_jerk_y": ["50", "50"], + "machine_max_jerk_z": ["2", "2"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["600", "600"], + "machine_max_speed_y": ["600", "600"], + "machine_max_speed_z": ["500", "500"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE\n", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json index 378dca3a2d..46d9ce1085 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.2 nozzle.json @@ -121,7 +121,7 @@ "Generic PLA @Creality Ender-3V3-all" ], "file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_total_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}", - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nG90 ;Absolute positioning \nM82 ;Absolute extrusion mode \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json index 97ef822dc7..b905be8d39 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.4 nozzle.json @@ -121,7 +121,7 @@ "Generic PLA @Creality Ender-3V3-all" ], "file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_total_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}", - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nG90 ;Absolute positioning \nM82 ;Absolute extrusion mode \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json index 7023c5a95a..40ad654754 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.6 nozzle.json @@ -121,7 +121,7 @@ "Generic PLA @Creality Ender-3V3-all" ], "file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_total_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}", - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nG90 ;Absolute positioning \nM82 ;Absolute extrusion mode \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json index acec590a1f..1b6053bd36 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V3 SE 0.8 nozzle.json @@ -121,7 +121,7 @@ "Generic PLA @Creality Ender-3V3-all" ], "file_start_gcode": ";FLAVOR:Marlin\\n;TIME:{print_time_total_sec}\\n;Filament used:{used_filament_length}m\\n;Layer height:{layer_height}", - "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", + "machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nG90 ;Absolute positioning \nM82 ;Absolute extrusion mode \n \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nM190 S[bed_temperature_initial_layer_single] ;Set and wait for bed temp to stabilize \nG28 ;Home \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y220 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "scan_first_layer": "0", "disable_m73": "1", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json index ce5d13c8d9..035bbf87a6 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V4 0.4 nozzle.json @@ -35,21 +35,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "126", - "machine_max_acceleration_e": "2400", - "machine_max_acceleration_extruding": "12000", - "machine_max_acceleration_retracting": "2400", - "machine_max_acceleration_travel": "12000", - "machine_max_acceleration_x": "12000", - "machine_max_acceleration_y": "12000", - "machine_max_acceleration_z": "1000", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "100", - "machine_max_jerk_y": "100", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "40", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["2400", "2400"], + "machine_max_acceleration_extruding": ["12000", "12000"], + "machine_max_acceleration_retracting": ["2400", "2400"], + "machine_max_acceleration_travel": ["12000", "12000"], + "machine_max_acceleration_x": ["12000", "12000"], + "machine_max_acceleration_y": ["12000", "12000"], + "machine_max_acceleration_z": ["1000", "1000"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["100", "100"], + "machine_max_jerk_y": ["100", "100"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["40", "40"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Ender-3 V4.json b/resources/profiles/Creality/machine/Creality Ender-3 V4.json index 3229f33792..baa9cec0af 100644 --- a/resources/profiles/Creality/machine/Creality Ender-3 V4.json +++ b/resources/profiles/Creality/machine/Creality Ender-3 V4.json @@ -2,9 +2,9 @@ "type": "machine_model", "name": "Creality Ender-3 V4", "nozzle_diameter": "0.4", - "bed_model": "creality_ender3v3_buildplate_model.stl", + "bed_model": "creality_ender3v4_buildplate_model.stl", "default_bed_type": "Textured PEI Plate", - "bed_texture": "creality_ender3v3_buildplate_texture.svg", + "bed_texture": "creality_ender3v4_buildplate_texture.svg", "family": "Creality", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json index 496a977127..b4e435461b 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "11", - "machine_max_acceleration_e": "30000", - "machine_max_acceleration_extruding": "50000", - "machine_max_acceleration_retracting": "50000", - "machine_max_acceleration_travel": "50000", - "machine_max_acceleration_x": "50000", - "machine_max_acceleration_y": "50000", - "machine_max_acceleration_z": "1000", - "machine_max_jerk_e": "100", - "machine_max_jerk_x": "100", - "machine_max_jerk_y": "100", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "1000", - "machine_max_speed_x": "1000", - "machine_max_speed_y": "1000", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["30000", "30000"], + "machine_max_acceleration_extruding": ["50000", "50000"], + "machine_max_acceleration_retracting": ["50000", "50000"], + "machine_max_acceleration_travel": ["50000", "50000"], + "machine_max_acceleration_x": ["50000", "50000"], + "machine_max_acceleration_y": ["50000", "50000"], + "machine_max_acceleration_z": ["1000", "1000"], + "machine_max_jerk_e": ["100", "100"], + "machine_max_jerk_x": ["100", "100"], + "machine_max_jerk_y": ["100", "100"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["1000", "1000"], + "machine_max_speed_x": ["1000", "1000"], + "machine_max_speed_y": ["1000", "1000"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json index 59d08460d5..8bf84b5292 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.6 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "11", - "machine_max_acceleration_e": "30000", - "machine_max_acceleration_extruding": "12000", - "machine_max_acceleration_retracting": "12000", - "machine_max_acceleration_travel": "50000", - "machine_max_acceleration_x": "12000", - "machine_max_acceleration_y": "12000", - "machine_max_acceleration_z": "100", - "machine_max_jerk_e": "6", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "4", - "machine_max_speed_e": "30", - "machine_max_speed_x": "1000", - "machine_max_speed_y": "1000", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["30000", "30000"], + "machine_max_acceleration_extruding": ["12000", "12000"], + "machine_max_acceleration_retracting": ["12000", "12000"], + "machine_max_acceleration_travel": ["50000", "50000"], + "machine_max_acceleration_x": ["12000", "12000"], + "machine_max_acceleration_y": ["12000", "12000"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_jerk_e": ["6", "6"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["4", "4"], + "machine_max_speed_e": ["30", "30"], + "machine_max_speed_x": ["1000", "1000"], + "machine_max_speed_y": ["1000", "1000"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json index fcfa26e790..d01635c614 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Max 0.8 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \n \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X395 Y395 F6000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "11", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "12000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "50000", - "machine_max_acceleration_x": "12000", - "machine_max_acceleration_y": "12000", - "machine_max_acceleration_z": "200", - "machine_max_jerk_e": "3", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "3", - "machine_max_speed_e": "30", - "machine_max_speed_x": "1000", - "machine_max_speed_y": "1000", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["12000", "12000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["50000", "50000"], + "machine_max_acceleration_x": ["12000", "12000"], + "machine_max_acceleration_y": ["12000", "12000"], + "machine_max_acceleration_z": ["200", "200"], + "machine_max_jerk_e": ["3", "3"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["3", "3"], + "machine_max_speed_e": ["30", "30"], + "machine_max_speed_x": ["1000", "1000"], + "machine_max_speed_y": ["1000", "1000"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json index 66fea8f254..03a8e00895 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 Plus 0.4 nozzle.json @@ -20,6 +20,7 @@ "nozzle_type": "undefine", "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "1000", "1000" ], "machine_max_acceleration_extruding": [ diff --git a/resources/profiles/Creality/machine/Creality Ender-5 S1 Sonic 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Ender-5 S1 Sonic 0.4 nozzle.json index c290f9bb9a..06c6ed6e99 100644 --- a/resources/profiles/Creality/machine/Creality Ender-5 S1 Sonic 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Ender-5 S1 Sonic 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "2000", - "machine_max_acceleration_extruding": "2500", - "machine_max_acceleration_retracting": "1000", - "machine_max_acceleration_travel": "2000", - "machine_max_acceleration_x": "2500", - "machine_max_acceleration_y": "2500", - "machine_max_acceleration_z": "100", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "12", - "machine_max_jerk_y": "12", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "100", - "machine_max_speed_x": "250", - "machine_max_speed_y": "250", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["2000", "2000"], + "machine_max_acceleration_extruding": ["2500", "2500"], + "machine_max_acceleration_retracting": ["1000", "1000"], + "machine_max_acceleration_travel": ["2000", "2000"], + "machine_max_acceleration_x": ["2500", "2500"], + "machine_max_acceleration_y": ["2500", "2500"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["12", "12"], + "machine_max_jerk_y": ["12", "12"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["250", "250"], + "machine_max_speed_y": ["250", "250"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json index 2acc80fe3d..4bc5847408 100644 --- a/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Hi 0.2 nozzle.json @@ -39,21 +39,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G1 X0 Y180 F8000\nEND_PRINT", "machine_load_filament_time": "105", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "12000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "12000", - "machine_max_acceleration_y": "12000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "2.5", - "machine_max_jerk_x": "12", - "machine_max_jerk_y": "12", - "machine_max_jerk_z": "2", - "machine_max_speed_e": "50", - "machine_max_speed_x": "300", - "machine_max_speed_y": "300", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["12000", "12000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["12000", "12000"], + "machine_max_acceleration_y": ["12000", "12000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["12", "12"], + "machine_max_jerk_y": ["12", "12"], + "machine_max_jerk_z": ["2", "2"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["300", "300"], + "machine_max_speed_y": ["300", "300"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json index dcf32371d4..74126664e2 100644 --- a/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Hi 0.8 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G1 X0 Y180 F8000\nEND_PRINT", "machine_load_filament_time": "105", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "12000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "12000", - "machine_max_acceleration_y": "12000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "2.5", - "machine_max_jerk_x": "12", - "machine_max_jerk_y": "12", - "machine_max_jerk_z": "2", - "machine_max_speed_e": "50", - "machine_max_speed_x": "300", - "machine_max_speed_y": "300", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["12000", "12000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["12000", "12000"], + "machine_max_acceleration_y": ["12000", "12000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["2.5", "2.5"], + "machine_max_jerk_x": ["12", "12"], + "machine_max_jerk_y": ["12", "12"], + "machine_max_jerk_z": ["2", "2"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["300", "300"], + "machine_max_speed_y": ["300", "300"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json index 2e96b092ab..f30d670e49 100644 --- a/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 Max_CFS-C 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "119", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "300", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "20", - "machine_max_jerk_y": "20", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "100", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["300", "300"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["20", "20"], + "machine_max_jerk_y": ["20", "20"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json index e1212431e2..0dbe9552e5 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 SE 0.6 nozzle.json @@ -38,21 +38,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "119", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "20", - "machine_max_jerk_y": "20", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "100", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["20", "20"], + "machine_max_jerk_y": ["20", "20"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json index e17cfbaee4..fb2ae7bc58 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 SE 0.8 nozzle.json @@ -38,21 +38,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "119", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "20", - "machine_max_jerk_y": "20", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "100", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["20", "20"], + "machine_max_jerk_y": ["20", "20"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json index aff5f6df86..1cce21a968 100644 --- a/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1 SE_CFS-C 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "119", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "20", - "machine_max_jerk_y": "20", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "100", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["20", "20"], + "machine_max_jerk_y": ["20", "20"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json index 3c21fddd9e..6d51a3cea8 100644 --- a/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1C_CFS-C 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "119", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "300", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "20", - "machine_max_jerk_y": "20", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "100", - "machine_max_speed_x": "600", - "machine_max_speed_y": "600", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["300", "300"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["20", "20"], + "machine_max_jerk_y": ["20", "20"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["600", "600"], + "machine_max_speed_y": ["600", "600"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json index c19ca981f8..f53f11a029 100644 --- a/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K1_CFS-C 0.4 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "119", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "300", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "20", - "machine_max_jerk_y": "20", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "100", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["300", "300"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["20", "20"], + "machine_max_jerk_y": ["20", "20"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json index a1c33a0026..2005444a7b 100644 --- a/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality K2 SE 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "135", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "20", - "machine_max_jerk_y": "20", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "100", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "30", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["20", "20"], + "machine_max_jerk_y": ["20", "20"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["100", "100"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["30", "30"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json index 146628aded..8f622d072d 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.2 nozzle.json @@ -39,21 +39,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G1 E-0.8 F2400 ; retract\nG2 Z{position[2]+3} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG92 E0 ; zero the extruder\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 1} F1800\n{endif}\nG1 X0 Y180 F8000\nEND_PRINT", "machine_load_filament_time": "30", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "10000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "30000", - "machine_max_acceleration_x": "10000", - "machine_max_acceleration_y": "10000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "3", - "machine_max_jerk_x": "9", - "machine_max_jerk_y": "9", - "machine_max_jerk_z": "3", - "machine_max_speed_e": "14", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["30000", "30000"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["3", "3"], + "machine_max_jerk_x": ["9", "9"], + "machine_max_jerk_y": ["9", "9"], + "machine_max_jerk_z": ["3", "3"], + "machine_max_speed_e": ["14", "14"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json index bf30a2ce49..34f9781bab 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.4 nozzle.json @@ -39,21 +39,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G1 E-0.8 F2400 ; retract\nG2 Z{position[2]+3} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG92 E0 ; zero the extruder\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 1} F1800\n{endif}\nG1 X0 Y180 F8000\nEND_PRINT", "machine_load_filament_time": "30", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "10000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "30000", - "machine_max_acceleration_x": "10000", - "machine_max_acceleration_y": "10000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "3", - "machine_max_jerk_x": "9", - "machine_max_jerk_y": "9", - "machine_max_jerk_z": "3", - "machine_max_speed_e": "14", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["30000", "30000"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["3", "3"], + "machine_max_jerk_x": ["9", "9"], + "machine_max_jerk_y": ["9", "9"], + "machine_max_jerk_z": ["3", "3"], + "machine_max_speed_e": ["14", "14"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json index e327895da7..406e50f45f 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.6 nozzle.json @@ -39,21 +39,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G1 E-0.8 F2400 ; retract\nG2 Z{position[2]+3} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG92 E0 ; zero the extruder\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 1} F1800\n{endif}\nG1 X0 Y180 F8000\nEND_PRINT", "machine_load_filament_time": "30", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "10000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "30000", - "machine_max_acceleration_x": "10000", - "machine_max_acceleration_y": "10000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "3", - "machine_max_jerk_x": "9", - "machine_max_jerk_y": "9", - "machine_max_jerk_z": "3", - "machine_max_speed_e": "14", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["30000", "30000"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["3", "3"], + "machine_max_jerk_x": ["9", "9"], + "machine_max_jerk_y": ["9", "9"], + "machine_max_jerk_z": ["3", "3"], + "machine_max_speed_e": ["14", "14"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json index a3fad94bab..0c4e269ea0 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7 0.8 nozzle.json @@ -39,21 +39,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G1 E-0.8 F2400 ; retract\nG2 Z{position[2]+3} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG92 E0 ; zero the extruder\n{if print_sequence == \"by object\"}\nG0 Z{max_layer_z + 1} F1800\n{endif}\nG1 X0 Y180 F8000\nEND_PRINT", "machine_load_filament_time": "30", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "10000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "30000", - "machine_max_acceleration_x": "10000", - "machine_max_acceleration_y": "10000", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "3", - "machine_max_jerk_x": "9", - "machine_max_jerk_y": "9", - "machine_max_jerk_z": "3", - "machine_max_speed_e": "14", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "20", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["10000", "10000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["30000", "30000"], + "machine_max_acceleration_x": ["10000", "10000"], + "machine_max_acceleration_y": ["10000", "10000"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["3", "3"], + "machine_max_jerk_x": ["9", "9"], + "machine_max_jerk_y": ["9", "9"], + "machine_max_jerk_z": ["3", "3"], + "machine_max_speed_e": ["14", "14"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["20", "20"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality SPARKX i7.json b/resources/profiles/Creality/machine/Creality SPARKX i7.json index 4ec6a2a935..180f042129 100644 --- a/resources/profiles/Creality/machine/Creality SPARKX i7.json +++ b/resources/profiles/Creality/machine/Creality SPARKX i7.json @@ -4,7 +4,7 @@ "nozzle_diameter": "0.8;0.6;0.4;0.2", "bed_model": "creality_SPARKX_buildplate_model.stl", "default_bed_type": "Textured PEI Plate", - "bed_texture": "creality_hi_buildplate_texture.svg", + "bed_texture": "creality_SPARKX_buildplate_texture.svg", "family": "Creality", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Creality/machine/Creality Sermoon D3 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Sermoon D3 0.4 nozzle.json index aafe573db7..cc5faa2e2e 100644 --- a/resources/profiles/Creality/machine/Creality Sermoon D3 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Sermoon D3 0.4 nozzle.json @@ -38,21 +38,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "500", - "machine_max_acceleration_retracting": "500", - "machine_max_acceleration_travel": "500", - "machine_max_acceleration_x": "500", - "machine_max_acceleration_y": "500", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "50", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["500", "500"], + "machine_max_acceleration_retracting": ["500", "500"], + "machine_max_acceleration_travel": ["500", "500"], + "machine_max_acceleration_x": ["500", "500"], + "machine_max_acceleration_y": ["500", "500"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Creality/machine/Creality Sermoon D3 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Sermoon D3 Pro 0.4 nozzle.json index e82ab42245..4c19dc813d 100644 --- a/resources/profiles/Creality/machine/Creality Sermoon D3 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Sermoon D3 Pro 0.4 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\n;G1 Z10 ;Raise Z more\nG90 ;Absolute positionning\n\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\n\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "5000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "3000", - "machine_max_acceleration_y": "3000", - "machine_max_acceleration_z": "100", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "50", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["5000", "5000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["3000", "3000"], + "machine_max_acceleration_y": ["3000", "3000"], + "machine_max_acceleration_z": ["100", "100"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Creality/machine/Creality Sermoon M300 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Sermoon M300 0.4 nozzle.json index bd52ae171a..05720901ca 100644 --- a/resources/profiles/Creality/machine/Creality Sermoon M300 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Sermoon M300 0.4 nozzle.json @@ -36,21 +36,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "128", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "300", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "100", - "machine_max_jerk_y": "100", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "50", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["300", "300"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["100", "100"], + "machine_max_jerk_y": ["100", "100"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Sermoon M300 0.6 nozzle.json b/resources/profiles/Creality/machine/Creality Sermoon M300 0.6 nozzle.json index e8cd96e845..8263db1d97 100644 --- a/resources/profiles/Creality/machine/Creality Sermoon M300 0.6 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Sermoon M300 0.6 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "128", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "300", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "100", - "machine_max_jerk_y": "100", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "50", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["300", "300"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["100", "100"], + "machine_max_jerk_y": ["100", "100"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Sermoon M300 0.8 nozzle.json b/resources/profiles/Creality/machine/Creality Sermoon M300 0.8 nozzle.json index 299bb1679b..7daddf2688 100644 --- a/resources/profiles/Creality/machine/Creality Sermoon M300 0.8 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Sermoon M300 0.8 nozzle.json @@ -37,21 +37,21 @@ "machine_LED_light_exist": "0", "machine_end_gcode": "END_PRINT", "machine_load_filament_time": "128", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "20000", - "machine_max_acceleration_retracting": "5000", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "20000", - "machine_max_acceleration_y": "20000", - "machine_max_acceleration_z": "300", - "machine_max_jerk_e": "10", - "machine_max_jerk_x": "100", - "machine_max_jerk_y": "100", - "machine_max_jerk_z": "5", - "machine_max_speed_e": "50", - "machine_max_speed_x": "800", - "machine_max_speed_y": "800", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["20000", "20000"], + "machine_max_acceleration_retracting": ["5000", "5000"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["20000", "20000"], + "machine_max_acceleration_y": ["20000", "20000"], + "machine_max_acceleration_z": ["300", "300"], + "machine_max_jerk_e": ["10", "10"], + "machine_max_jerk_x": ["100", "100"], + "machine_max_jerk_y": ["100", "100"], + "machine_max_jerk_z": ["5", "5"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["800", "800"], + "machine_max_speed_y": ["800", "800"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Creality/machine/Creality Sermoon V1 Pro 0.4 nozzle.json b/resources/profiles/Creality/machine/Creality Sermoon V1 Pro 0.4 nozzle.json index 036ec9c791..ffa05ac323 100644 --- a/resources/profiles/Creality/machine/Creality Sermoon V1 Pro 0.4 nozzle.json +++ b/resources/profiles/Creality/machine/Creality Sermoon V1 Pro 0.4 nozzle.json @@ -38,21 +38,21 @@ "machine_LED_light_exist": "1", "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z", "machine_load_filament_time": "0", - "machine_max_acceleration_e": "5000", - "machine_max_acceleration_extruding": "500", - "machine_max_acceleration_retracting": "500", - "machine_max_acceleration_travel": "20000", - "machine_max_acceleration_x": "500", - "machine_max_acceleration_y": "500", - "machine_max_acceleration_z": "500", - "machine_max_jerk_e": "5", - "machine_max_jerk_x": "10", - "machine_max_jerk_y": "10", - "machine_max_jerk_z": "0.4", - "machine_max_speed_e": "50", - "machine_max_speed_x": "500", - "machine_max_speed_y": "500", - "machine_max_speed_z": "10", + "machine_max_acceleration_e": ["5000", "5000"], + "machine_max_acceleration_extruding": ["500", "500"], + "machine_max_acceleration_retracting": ["500", "500"], + "machine_max_acceleration_travel": ["20000", "20000"], + "machine_max_acceleration_x": ["500", "500"], + "machine_max_acceleration_y": ["500", "500"], + "machine_max_acceleration_z": ["500", "500"], + "machine_max_jerk_e": ["5", "5"], + "machine_max_jerk_x": ["10", "10"], + "machine_max_jerk_y": ["10", "10"], + "machine_max_jerk_z": ["0.4", "0.4"], + "machine_max_speed_e": ["50", "50"], + "machine_max_speed_x": ["500", "500"], + "machine_max_speed_y": ["500", "500"], + "machine_max_speed_z": ["10", "10"], "machine_min_extruding_rate": "0,0", "machine_min_travel_rate": "0,0", "machine_pause_gcode": "M25", diff --git a/resources/profiles/Cubicon.json b/resources/profiles/Cubicon.json index 57f9da37d6..b50c3be4b7 100644 --- a/resources/profiles/Cubicon.json +++ b/resources/profiles/Cubicon.json @@ -1,6 +1,6 @@ { "name": "Cubicon", - "version": "02.04.00.06", + "version": "02.04.00.08", "force_update": "0", "description": "Cubicon configurations", "machine_model_list": [ diff --git a/resources/profiles/Cubicon/Cubicon xCeler-Mini_cover.png b/resources/profiles/Cubicon/Cubicon xCeler-Mini_cover.png index 9474c2d5ed..eb9f73c5ea 100644 Binary files a/resources/profiles/Cubicon/Cubicon xCeler-Mini_cover.png and b/resources/profiles/Cubicon/Cubicon xCeler-Mini_cover.png differ diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json index 93949a7c80..03721728c7 100644 --- a/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon ABS @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon ABS @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon ABS @base", "renamed_from": "Cubicon ABS @base", + "inherits": "Cubicon ABS @base", "setting_id": "VJEyK87ZYvHmamB9", "filament_id": "OFpDo5Ix", "instantiation": "true", diff --git a/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json index 2788688e1b..ab66e1a8f5 100644 --- a/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon ABS-A100 @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon ABS-A100 @base", "renamed_from": "Cubicon ABS-A100 @base", + "inherits": "Cubicon ABS-A100 @base", "setting_id": "OfiOryklf7FDVCz8", "filament_id": "OFy8tYJE", "instantiation": "true", diff --git a/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json index cdb6324af1..913a98cfed 100644 --- a/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon ABSk @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon ABSk @base", "renamed_from": "Cubicon ABSk @base", + "inherits": "Cubicon ABSk @base", "setting_id": "TXcodZkab4fofnEn", "filament_id": "OForhBi4", "instantiation": "true", diff --git a/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json index 09a5d917f4..7999bdd8e2 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon PA-CF @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PA-CF @base", "renamed_from": "Cubicon PA-CF @base", + "inherits": "Cubicon PA-CF @base", "setting_id": "nupuIJggdc1EKDqG", "filament_id": "OFiEz2XI", "instantiation": "true", diff --git a/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json index e37f5f063c..6a4347591a 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PC @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon PC @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PC @base", "renamed_from": "Cubicon PC @base", + "inherits": "Cubicon PC @base", "setting_id": "c0sUPS0SRYUNjEpB", "filament_id": "OFEj7sca", "instantiation": "true", diff --git a/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json index db9a90c42d..d5fcedfa96 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PETG @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon PETG @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PETG @base", "renamed_from": "Cubicon PETG @base", + "inherits": "Cubicon PETG @base", "setting_id": "dsX01tCkd2Usk104", "filament_id": "OFoBTKmn", "instantiation": "true", diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json index 3b3c9b1d4c..154c8c664f 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PLA @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon PLA @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PLA @base", "renamed_from": "Cubicon PLA @base", + "inherits": "Cubicon PLA @base", "from": "system", "setting_id": "xXJgHAeNf1JdCitr", "filament_id": "OFEwRwmL", diff --git a/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json index 3674c61e3f..eba57450e5 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon PLA+ @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PLA+ @base", "renamed_from": "Cubicon PLA+ @base", + "inherits": "Cubicon PLA+ @base", "from": "system", "setting_id": "fNR2Bw3e4TGcWhq0", "filament_id": "OF7tt7DO", diff --git a/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json index 74bff5f995..374e068198 100644 --- a/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json +++ b/resources/profiles/Cubicon/filament/Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Cubicon PLAi21 @Cubicon xCeler-I 0.4 nozzle", - "inherits": "Cubicon PLAi21 @base", "renamed_from": "Cubicon PLAi21 @base", + "inherits": "Cubicon PLAi21 @base", "from": "system", "setting_id": "vcLVF3cglagBfVAF", "filament_id": "OFRhBryT", diff --git a/resources/profiles/Custom.json b/resources/profiles/Custom.json index aceecc557a..afbcdacbe8 100644 --- a/resources/profiles/Custom.json +++ b/resources/profiles/Custom.json @@ -1,6 +1,6 @@ { "name": "Custom Printer", - "version": "02.04.00.05", + "version": "02.04.00.07", "force_update": "0", "description": "My configurations", "machine_model_list": [ diff --git a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json index 615d3aafa4..3b55c98554 100644 --- a/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic ABS @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "h83PqSYsAi8yZyg0", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "0.926", + "0.926", + "0.926" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "20", + "25" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json index cef361767f..d5d74a280c 100644 --- a/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic ASA @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "WllFTKxFejz4prhD", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "0.926", + "0.926", + "0.926" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "20", + "25" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "260", + "260", + "260" + ], + "nozzle_temperature_initial_layer": [ + "260", + "260", + "260" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json index f8a3f9d4ff..047a5f4584 100644 --- a/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PA @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "Lw6e7YMy0J5Flnjj", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "8", + "12", + "12" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json index 3db93c2e10..cc86241941 100644 --- a/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PA-CF @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "0NPQJ9aRrfjAqLeX", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "8", + "8", + "8" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280", + "280" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json index 8fbc18b513..310d50a16d 100644 --- a/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PC @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "HMOa2jbj19Xjipt5", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "20", + "30" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "280", + "280", + "280" + ], + "nozzle_temperature_initial_layer": [ + "270", + "270", + "270" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json index faba4cf7cb..ebe6728fe9 100644 --- a/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PETG @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "4qShNrl9EWAVBfeG", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "10", + "18", + "21" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "255", + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255", + "255" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json index 5f20b83ec5..557e432016 100644 --- a/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PLA @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "WbAYFZdqFwEZnNAX", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "21", + "40" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json index ccfc71ebb7..f7df427b1e 100644 --- a/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PLA-CF @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "53UFt3Q63NB0ztlP", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "18", + "18" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json index 67a46e0129..dce39dc311 100644 --- a/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic PVA @MyToolChanger.json @@ -6,6 +6,111 @@ "from": "system", "setting_id": "dyOUyXNOKP1VmSal", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "4", + "4", + "4" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220" + ], "filament_cooling_final_speed": [ "3.5" ], diff --git a/resources/profiles/Custom/filament/Generic TPU @MyToolChanger.json b/resources/profiles/Custom/filament/Generic TPU @MyToolChanger.json index 2527ff824e..175174d72b 100644 --- a/resources/profiles/Custom/filament/Generic TPU @MyToolChanger.json +++ b/resources/profiles/Custom/filament/Generic TPU @MyToolChanger.json @@ -6,7 +6,109 @@ "from": "system", "setting_id": "H45dfn4BGdLAx9nN", "instantiation": "true", + "activate_air_filtration": [ + "0", + "0", + "0" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70", + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "filament_flow_ratio": [ + "1", + "1", + "1" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retract_before_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil", + "nil" + ], + "nozzle_temperature": [ + "240", + "240", + "240" + ], + "nozzle_temperature_initial_layer": [ + "240", + "240", + "240" + ], "filament_max_volumetric_speed": [ + "3.2", + "3.2", "3.2" ], "compatible_printers": [ diff --git a/resources/profiles/Custom/machine/MyKlipper 0.2 nozzle.json b/resources/profiles/Custom/machine/MyKlipper 0.2 nozzle.json index c7686998c0..a692f178f8 100644 --- a/resources/profiles/Custom/machine/MyKlipper 0.2 nozzle.json +++ b/resources/profiles/Custom/machine/MyKlipper 0.2 nozzle.json @@ -5,6 +5,25 @@ "from": "system", "setting_id": "FONwo6mjzIUC1Jfw", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic Klipper Printer", "nozzle_diameter": [ "0.2" diff --git a/resources/profiles/Custom/machine/MyKlipper 0.4 nozzle.json b/resources/profiles/Custom/machine/MyKlipper 0.4 nozzle.json index 6c5bd3fc83..20468e270a 100644 --- a/resources/profiles/Custom/machine/MyKlipper 0.4 nozzle.json +++ b/resources/profiles/Custom/machine/MyKlipper 0.4 nozzle.json @@ -5,6 +5,25 @@ "from": "system", "setting_id": "h7lWobw9IAl6rIFf", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic Klipper Printer", "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Custom/machine/MyKlipper 0.6 nozzle.json b/resources/profiles/Custom/machine/MyKlipper 0.6 nozzle.json index 35a5ca033f..19dd3981dc 100644 --- a/resources/profiles/Custom/machine/MyKlipper 0.6 nozzle.json +++ b/resources/profiles/Custom/machine/MyKlipper 0.6 nozzle.json @@ -5,6 +5,25 @@ "from": "system", "setting_id": "ealoRWEBVYdKQwY4", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic Klipper Printer", "nozzle_diameter": [ "0.6" diff --git a/resources/profiles/Custom/machine/MyKlipper 0.8 nozzle.json b/resources/profiles/Custom/machine/MyKlipper 0.8 nozzle.json index 1dd4e563cf..249dd7f0b3 100644 --- a/resources/profiles/Custom/machine/MyKlipper 0.8 nozzle.json +++ b/resources/profiles/Custom/machine/MyKlipper 0.8 nozzle.json @@ -5,6 +5,25 @@ "from": "system", "setting_id": "ameNjll5Z5Ptmvko", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic Klipper Printer", "nozzle_diameter": [ "0.8" diff --git a/resources/profiles/Custom/machine/MyMarlin 0.4 nozzle.json b/resources/profiles/Custom/machine/MyMarlin 0.4 nozzle.json index a8cff74ece..333e6359ac 100644 --- a/resources/profiles/Custom/machine/MyMarlin 0.4 nozzle.json +++ b/resources/profiles/Custom/machine/MyMarlin 0.4 nozzle.json @@ -5,6 +5,25 @@ "from": "system", "setting_id": "80333z8YjBojDweT", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic Marlin Printer", "gcode_flavor": "marlin", "machine_end_gcode": "G1 E-1.0 F2100 ; retract\nG92 E0.0\nG1{if max_layer_z < max_print_height} Z{z_offset+min(max_layer_z+30, max_print_height)}{endif} E-34.0 F720 ; move print head up & retract filament\nG4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y105 F3000 ; park print head\nM84 ; disable motors", @@ -13,21 +32,33 @@ "0.32" ], "retraction_length": [ + "0.9", + "0.9", "0.9" ], "retraction_minimum_travel": [ + "1", + "1", "1" ], "retraction_speed": [ + "45", + "45", "45" ], "deretraction_speed": [ + "35", + "35", "35" ], "wipe": [ + "0", + "0", "0" ], "z_hop": [ + "0.4", + "0.4", "0.4" ], "nozzle_diameter": [ diff --git a/resources/profiles/Custom/machine/MyRRF 0.4 nozzle.json b/resources/profiles/Custom/machine/MyRRF 0.4 nozzle.json index 492f696697..17c5735fa5 100644 --- a/resources/profiles/Custom/machine/MyRRF 0.4 nozzle.json +++ b/resources/profiles/Custom/machine/MyRRF 0.4 nozzle.json @@ -5,6 +5,25 @@ "from": "system", "setting_id": "eweNs9Rgfgftu6Nw", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic RRF Printer", "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json b/resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json index 0c06ed2dbe..585b444582 100644 --- a/resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json +++ b/resources/profiles/Custom/machine/MyRepetier 0.4 nozzle.json @@ -5,6 +5,25 @@ "from": "system", "setting_id": "DQo4iCTagLKPE8Kv", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic Repetier Printer", "nozzle_diameter": [ "0.4" @@ -17,4 +36,4 @@ "0x250" ], "printable_height": "250" -} \ No newline at end of file +} diff --git a/resources/profiles/Custom/machine/MyRepetier.json b/resources/profiles/Custom/machine/MyRepetier.json index 7b5a291c72..2cb389a660 100644 --- a/resources/profiles/Custom/machine/MyRepetier.json +++ b/resources/profiles/Custom/machine/MyRepetier.json @@ -9,4 +9,4 @@ "bed_texture": "orcaslicer_bed_texture.svg", "hotend_model": "", "default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System" -} \ No newline at end of file +} diff --git a/resources/profiles/Custom/machine/MyToolChanger 0.2 nozzle.json b/resources/profiles/Custom/machine/MyToolChanger 0.2 nozzle.json index 0e7d56e99a..1cf35f8809 100644 --- a/resources/profiles/Custom/machine/MyToolChanger 0.2 nozzle.json +++ b/resources/profiles/Custom/machine/MyToolChanger 0.2 nozzle.json @@ -5,6 +5,61 @@ "from": "system", "setting_id": "BFnMQPzSH6GHG60z", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard", + "Standard", + "Standard", + "Standard", + "Standard" + ], + "extruder_type": [ + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic ToolChanger Printer", "nozzle_diameter": [ "0.2", diff --git a/resources/profiles/Custom/machine/MyToolChanger 0.4 nozzle.json b/resources/profiles/Custom/machine/MyToolChanger 0.4 nozzle.json index 64a50ed44e..b44db48b01 100644 --- a/resources/profiles/Custom/machine/MyToolChanger 0.4 nozzle.json +++ b/resources/profiles/Custom/machine/MyToolChanger 0.4 nozzle.json @@ -5,6 +5,61 @@ "from": "system", "setting_id": "tJ98aJdTqDwMfyZd", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard", + "Standard", + "Standard", + "Standard", + "Standard" + ], + "extruder_type": [ + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic ToolChanger Printer", "nozzle_diameter": [ "0.4", diff --git a/resources/profiles/Custom/machine/MyToolChanger 0.6 nozzle.json b/resources/profiles/Custom/machine/MyToolChanger 0.6 nozzle.json index fc615ac3d9..d15c22ef43 100644 --- a/resources/profiles/Custom/machine/MyToolChanger 0.6 nozzle.json +++ b/resources/profiles/Custom/machine/MyToolChanger 0.6 nozzle.json @@ -5,6 +5,61 @@ "from": "system", "setting_id": "rhZgOdaU0sJu9aYF", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard", + "Standard", + "Standard", + "Standard", + "Standard" + ], + "extruder_type": [ + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic ToolChanger Printer", "nozzle_diameter": [ "0.6", diff --git a/resources/profiles/Custom/machine/MyToolChanger 0.8 nozzle.json b/resources/profiles/Custom/machine/MyToolChanger 0.8 nozzle.json index c019a13181..a9ac3fe999 100644 --- a/resources/profiles/Custom/machine/MyToolChanger 0.8 nozzle.json +++ b/resources/profiles/Custom/machine/MyToolChanger 0.8 nozzle.json @@ -5,6 +5,61 @@ "from": "system", "setting_id": "2rsBSbB6oAgBhyy0", "instantiation": "true", + "default_nozzle_volume_type": [ + "Standard", + "Standard", + "Standard", + "Standard", + "Standard" + ], + "extruder_type": [ + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_model": "Generic ToolChanger Printer", "nozzle_diameter": [ "0.8", diff --git a/resources/profiles/Custom/machine/fdm_klipper_common.json b/resources/profiles/Custom/machine/fdm_klipper_common.json index 0080d0ebb0..96e8888c7c 100644 --- a/resources/profiles/Custom/machine/fdm_klipper_common.json +++ b/resources/profiles/Custom/machine/fdm_klipper_common.json @@ -4,64 +4,143 @@ "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "gcode_flavor": "klipper", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_e": [ + "25", + "25", + "25", + "25", "25", "25" ], "machine_max_speed_x": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "0.2", + "0.4", + "0.2", + "0.4", "0.2", "0.4" ], @@ -87,39 +166,65 @@ "printer_technology": "FFF", "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", + "1", "1" ], "retract_before_wipe": [ + "70%", + "70%", "70%" ], "retract_when_changing_layer": [ + "1", + "1", "1" ], "retraction_length": [ + "0.8", + "0.8", "0.8" ], "retract_length_toolchange": [ + "2", + "2", "2" ], "z_hop": [ + "0.4", + "0.4", "0.4" ], "retract_restart_extra": [ + "0", + "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", "0" ], "retraction_speed": [ + "30", + "30", "30" ], "deretraction_speed": [ + "30", + "30", "30" ], - "z_hop_types": "Slope Lift", + "z_hop_types": [ + "Slope Lift", + "Slope Lift", + "Slope Lift" + ], "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ + "1", + "1", "1" ], "default_filament_profile": [ @@ -135,6 +240,10 @@ "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_pause_gcode": "PAUSE", "scan_first_layer": "0", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine", + "undefine" + ], "auxiliary_fan": "0" } diff --git a/resources/profiles/Custom/machine/fdm_machine_common.json b/resources/profiles/Custom/machine/fdm_machine_common.json index bf8f2249cf..10f65cdf80 100644 --- a/resources/profiles/Custom/machine/fdm_machine_common.json +++ b/resources/profiles/Custom/machine/fdm_machine_common.json @@ -3,8 +3,29 @@ "name": "fdm_machine_common", "from": "system", "instantiation": "false", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "printer_technology": "FFF", "deretraction_speed": [ + "40", + "40", "40" ], "extruder_colour": [ @@ -15,45 +36,115 @@ ], "gcode_flavor": "marlin", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "10000", + "10000", + "10000", + "10000", + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "1000", + "1000", + "1000", + "1000", + "1000", "1000" ], "machine_max_acceleration_x": [ + "10000", + "10000", + "10000", + "10000", + "10000", "10000" ], "machine_max_acceleration_y": [ + "10000", + "10000", + "10000", + "10000", + "10000", "10000" ], "machine_max_acceleration_z": [ + "500", + "500", + "500", + "500", + "500", "500" ], "machine_max_speed_e": [ + "60", + "60", + "60", + "60", + "60", "60" ], "machine_max_speed_x": [ + "500", + "500", + "500", + "500", + "500", "500" ], "machine_max_speed_y": [ + "500", + "500", + "500", + "500", + "500", "500" ], "machine_max_speed_z": [ + "10", + "10", + "10", + "10", + "10", "10" ], "machine_max_jerk_e": [ + "5", + "5", + "5", + "5", + "5", "5" ], "machine_max_jerk_x": [ + "8", + "8", + "8", + "8", + "8", "8" ], "machine_max_jerk_y": [ + "8", + "8", + "8", + "8", + "8", "8" ], "machine_max_jerk_z": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", "0.4" ], "machine_min_extruding_rate": [ @@ -78,35 +169,55 @@ "printer_settings_id": "", "printer_variant": "0.4", "retraction_minimum_travel": [ + "2", + "2", "2" ], "retract_before_wipe": [ + "70%", + "70%", "70%" ], "retract_when_changing_layer": [ + "1", + "1", "1" ], "retraction_length": [ + "1", + "1", "1" ], "retract_length_toolchange": [ + "1", + "1", "1" ], "z_hop": [ + "0", + "0", "0" ], "retract_restart_extra": [ + "0", + "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", "0" ], "retraction_speed": [ + "60", + "60", "60" ], "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ + "1", + "1", "1" ], "default_print_profile": "", diff --git a/resources/profiles/Custom/machine/fdm_repetier_common.json b/resources/profiles/Custom/machine/fdm_repetier_common.json index 27b4dd7741..7cb3faf648 100644 --- a/resources/profiles/Custom/machine/fdm_repetier_common.json +++ b/resources/profiles/Custom/machine/fdm_repetier_common.json @@ -4,66 +4,145 @@ "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "gcode_flavor": "repetier", "disable_m73": "1", "emit_machine_limits_to_gcode": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_e": [ + "25", + "25", + "25", + "25", "25", "25" ], "machine_max_speed_x": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "0.2", + "0.4", + "0.2", + "0.4", "0.2", "0.4" ], @@ -89,39 +168,65 @@ "printer_technology": "FFF", "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", + "1", "1" ], "retract_before_wipe": [ + "70%", + "70%", "70%" ], "retract_when_changing_layer": [ + "1", + "1", "1" ], "retraction_length": [ + "0.8", + "0.8", "0.8" ], "retract_length_toolchange": [ + "2", + "2", "2" ], "z_hop": [ + "0.4", + "0.4", "0.4" ], "retract_restart_extra": [ + "0", + "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", "0" ], "retraction_speed": [ + "30", + "30", "30" ], "deretraction_speed": [ + "30", + "30", "30" ], - "z_hop_types": "Slope Lift", + "z_hop_types": [ + "Slope Lift", + "Slope Lift", + "Slope Lift" + ], "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ + "1", + "1", "1" ], "default_filament_profile": [ @@ -137,6 +242,10 @@ "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "machine_pause_gcode": "G91\nG1 Z10 F900\nG90\nG1 X0 Y0 F6000\n", "scan_first_layer": "0", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine", + "undefine" + ], "auxiliary_fan": "0" } diff --git a/resources/profiles/Custom/machine/fdm_rrf_common.json b/resources/profiles/Custom/machine/fdm_rrf_common.json index e9a1301622..e85c6977ad 100644 --- a/resources/profiles/Custom/machine/fdm_rrf_common.json +++ b/resources/profiles/Custom/machine/fdm_rrf_common.json @@ -4,64 +4,143 @@ "inherits": "fdm_machine_common", "from": "system", "instantiation": "false", + "default_nozzle_volume_type": [ + "Standard" + ], + "extruder_type": [ + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "printer_extruder_id": [ + "1", + "1", + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "gcode_flavor": "reprapfirmware", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_e": [ + "25", + "25", + "25", + "25", "25", "25" ], "machine_max_speed_x": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "0.2", + "0.4", + "0.2", + "0.4", "0.2", "0.4" ], @@ -87,39 +166,65 @@ "printer_technology": "FFF", "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", + "1", "1" ], "retract_before_wipe": [ + "70%", + "70%", "70%" ], "retract_when_changing_layer": [ + "1", + "1", "1" ], "retraction_length": [ + "0.8", + "0.8", "0.8" ], "retract_length_toolchange": [ + "2", + "2", "2" ], "z_hop": [ + "0.4", + "0.4", "0.4" ], "retract_restart_extra": [ + "0", + "0", "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", "0" ], "retraction_speed": [ + "30", + "30", "30" ], "deretraction_speed": [ + "30", + "30", "30" ], - "z_hop_types": "Slope Lift", + "z_hop_types": [ + "Slope Lift", + "Slope Lift", + "Slope Lift" + ], "single_extruder_multi_material": "1", "change_filament_gcode": "", "wipe": [ + "1", + "1", "1" ], "default_filament_profile": [ @@ -130,7 +235,11 @@ "0x0" ], "scan_first_layer": "0", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine", + "undefine" + ], "auxiliary_fan": "0", "machine_start_gcode": "; Prime Filament Sensor for Runout\nM581 P1 T2 S-1 R0\nM950 J1 C\"nil\" ; Input 1 e0 Filament Sensor \nM591 D0 P2 C\"e0stop\" S1 ; Filament Runout Sensor\n\nM83 ; extruder relative mode\n\nM140 S[first_layer_bed_temperature] ; set bed temp\nM109 S140 ; Set extruder temp 140C before bed level\nM190 S[first_layer_bed_temperature] ; wait for bed temp\n\n;G28 W\nG32 ; Levels Z Tilt and probes Z=0\nG29 S0 ; mesh bed leveling\nG1 X0 Y0 Z2 F2000\nM109 S[first_layer_temperature] ; wait for extruder temp\n\nG1 X10 Y-7 Z0.3 F1000.0 ; go outside print area\nG92 E0.0\nG1 Z0.2 E8 ; Purge Bubble\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0", "machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors", diff --git a/resources/profiles/Custom/machine/fdm_toolchanger_common.json b/resources/profiles/Custom/machine/fdm_toolchanger_common.json index 55f1b2cadb..3efd27245a 100644 --- a/resources/profiles/Custom/machine/fdm_toolchanger_common.json +++ b/resources/profiles/Custom/machine/fdm_toolchanger_common.json @@ -4,6 +4,541 @@ "inherits": "fdm_klipper_common", "from": "system", "instantiation": "false", + "default_nozzle_volume_type": [ + "Standard", + "Standard", + "Standard", + "Standard", + "Standard" + ], + "extruder_type": [ + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive", + "Direct Drive" + ], + "extruder_variant_list": [ + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow", + "Direct Drive Standard,Direct Drive High Flow,Direct Drive Extra High Flow" + ], + "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_extruding": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_x": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_y": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", + "20000" + ], + "machine_max_acceleration_z": [ + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9", + "9" + ], + "machine_max_jerk_z": [ + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4", + "0.2", + "0.4" + ], + "machine_max_speed_e": [ + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25", + "25" + ], + "machine_max_speed_x": [ + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200" + ], + "machine_max_speed_y": [ + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200", + "500", + "200" + ], + "machine_max_speed_z": [ + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12", + "12" + ], + "printer_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "printer_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "gcode_flavor": "klipper", "single_extruder_multi_material": "0", "wait_for_temp_on_wipe_tower": "1", @@ -26,6 +561,16 @@ "0.08" ], "deretraction_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", "30", "30", "30", @@ -47,6 +592,16 @@ "0x0" ], "long_retractions_when_cut": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0", "0", "0", @@ -61,6 +616,16 @@ "0.4" ], "retract_before_wipe": [ + "70%", + "70%", + "70%", + "70%", + "70%", + "70%", + "70%", + "70%", + "70%", + "70%", "70%", "70%", "70%", @@ -68,6 +633,16 @@ "70%" ], "retract_length_toolchange": [ + "2", + "2", + "2", + "2", + "2", + "2", + "2", + "2", + "2", + "2", "2", "2", "2", @@ -75,6 +650,16 @@ "2" ], "retract_lift_above": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0", "0", "0", @@ -82,6 +667,16 @@ "0" ], "retract_lift_below": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0", "0", "0", @@ -89,6 +684,16 @@ "0" ], "retract_lift_enforce": [ + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", + "All Surfaces", "All Surfaces", "All Surfaces", "All Surfaces", @@ -96,6 +701,16 @@ "All Surfaces" ], "retract_restart_extra": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0", "0", "0", @@ -103,6 +718,16 @@ "0" ], "retract_restart_extra_toolchange": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", "0", "0", "0", @@ -110,6 +735,16 @@ "0" ], "retract_when_changing_layer": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", "1", "1", "1", @@ -117,6 +752,16 @@ "1" ], "retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", + "18", + "18", + "18", + "18", + "18", "18", "18", "18", @@ -124,6 +769,16 @@ "18" ], "retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", "0.8", "0.8", "0.8", @@ -131,6 +786,16 @@ "0.8" ], "retraction_minimum_travel": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", "1", "1", "1", @@ -138,6 +803,16 @@ "1" ], "retraction_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", "30", "30", "30", @@ -145,6 +820,16 @@ "30" ], "travel_slope": [ + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", + "3", "3", "3", "3", @@ -152,6 +837,16 @@ "3" ], "wipe": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", "1", "1", "1", @@ -159,6 +854,16 @@ "1" ], "wipe_distance": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", "1", "1", "1", @@ -166,6 +871,16 @@ "1" ], "z_hop": [ + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", + "0.4", "0.4", "0.4", "0.4", @@ -173,6 +888,16 @@ "0.4" ], "z_hop_types": [ + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", + "Slope Lift", "Slope Lift", "Slope Lift", "Slope Lift", @@ -184,6 +909,22 @@ "change_filament_gcode": "", "machine_start_gcode": "PRINT_START TOOL_TEMP={first_layer_temperature[initial_tool]} {if is_extruder_used[0]}T0_TEMP={first_layer_temperature[0]}{endif} {if is_extruder_used[1]}T1_TEMP={first_layer_temperature[1]}{endif} {if is_extruder_used[2]}T2_TEMP={first_layer_temperature[2]}{endif} {if is_extruder_used[3]}T3_TEMP={first_layer_temperature[3]}{endif} {if is_extruder_used[4]}T4_TEMP={first_layer_temperature[4]}{endif} {if is_extruder_used[5]}T5_TEMP={first_layer_temperature[5]}{endif} BED_TEMP=[first_layer_bed_temperature] TOOL=[initial_tool]\n\nM83\n; set extruder temp\n{if first_layer_temperature[0] > 0 and (is_extruder_used[0])}M104 T0 S{first_layer_temperature[0]}{endif}\n{if first_layer_temperature[1] > 0 and (is_extruder_used[1])}M104 T1 S{first_layer_temperature[1]}{endif}\n{if first_layer_temperature[2] > 0 and (is_extruder_used[2])}M104 T2 S{first_layer_temperature[2]}{endif}\n{if first_layer_temperature[3] > 0 and (is_extruder_used[3])}M104 T3 S{first_layer_temperature[3]}{endif}\n{if first_layer_temperature[4] > 0 and (is_extruder_used[4])}M104 T4 S{first_layer_temperature[4]}{endif}\n{if (is_extruder_used[0]) and initial_tool != 0}\n;\n; purge first tool\n;\nG1 F{travel_speed * 60}\nM109 T0 S{first_layer_temperature[0]}\nT0; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(0 == 0 ? 0 : (0 == 1 ? 120 : (0 == 2 ? 180 : 300)))} Y{(0 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[0]}10{else}30{endif} X40 Z0.2 F{if filament_multitool_ramming[0]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X40 E9 F800 ; continue purging and wipe the nozzle\nG0 X{40 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{40 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[0]} F2400 ; retract\n{e_retracted[0] = 1.5 * retract_length[0]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[0] == 0 ? (first_layer_temperature[0] + standby_temperature_delta) : (idle_temperature[0]))} T0\n{endif}\n{if (is_extruder_used[1]) and initial_tool != 1}\n;\n; purge second tool\n;\nG1 F{travel_speed * 60}\nM109 T1 S{first_layer_temperature[1]}\nT1; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(1 == 0 ? 0 : (1 == 1 ? 120 : (1 == 2 ? 180 : 300)))} Y{(1 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[1]}10{else}30{endif} X120 Z0.2 F{if filament_multitool_ramming[1]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X80 E9 F800 ; continue purging and wipe the nozzle\nG0 X{80 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{80 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[1]} F2400 ; retract\n{e_retracted[1] = 1.5 * retract_length[1]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[1] == 0 ? (first_layer_temperature[1] + standby_temperature_delta) : (idle_temperature[1]))} T1\n{endif}\n{if (is_extruder_used[2]) and initial_tool != 2}\n;\n; purge third tool\n;\nG1 F{travel_speed * 60}\nM109 T2 S{first_layer_temperature[2]}\nT2; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(2 == 0 ? 0 : (2 == 1 ? 120 : (2 == 2 ? 180 : 300)))} Y{(2 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[2]}10{else}30{endif} X220 Z0.2 F{if filament_multitool_ramming[2]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X220 E9 F800 ; continue purging and wipe the nozzle\nG0 X{220 + 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{220 + 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[2]} F2400 ; retract\n{e_retracted[2] = 1.5 * retract_length[2]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[2] == 0 ? (first_layer_temperature[2] + standby_temperature_delta) : (idle_temperature[2]))} T2\n{endif}\n{if (is_extruder_used[3]) and initial_tool != 3}\n;\n; purge fourth tool\n;\nG1 F{travel_speed * 60}\nM109 T3 S{first_layer_temperature[3]}\nT3; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(3 == 0 ? 0 : (3 == 1 ? 120 : (3 == 2 ? 180 : 300)))} Y{(3 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[3]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[3]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[3]} F2400 ; retract\n{e_retracted[3] = 1.5 * retract_length[3]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[3] == 0 ? (first_layer_temperature[3] + standby_temperature_delta) : (idle_temperature[3]))} T3\n{endif}\n{if (is_extruder_used[4]) and initial_tool != 4}\n;\n; purge fifth tool\n;\nG1 F{travel_speed * 60}\nM109 T4 S{first_layer_temperature[4]}\nT4; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(4 == 0 ? 0 : (4 == 1 ? 120 : (4 == 2 ? 180 : 300)))} Y{(4 < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[4]}10{else}30{endif} X290 Z0.2 F{if filament_multitool_ramming[4]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X260 E9 F800 ; continue purging and wipe the nozzle\nG0 X{260 - 3} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{260 - 3 * 2} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[4]} F2400 ; retract\n{e_retracted[4] = 1.5 * retract_length[4]} ; update slicer internal retract variable\nG92 E0 ; reset extruder position\n\nM104 S{(idle_temperature[4] == 0 ? (first_layer_temperature[4] + standby_temperature_delta) : (idle_temperature[4]))} T4\n{endif}\n;\n; purge initial tool\n;\nG1 F{travel_speed * 60}\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]}\nT{initial_tool}; pick the tool\nG92 E0 ; reset extruder position\n\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300)))} Y{(initial_tool < 4 ? 0 : 3)} Z10 F{(travel_speed * 60)} ; move close to the sheet's edge\nG0 E{if filament_multitool_ramming[initial_tool]}10{else}30{endif} X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 10)} Z0.2 F{if filament_multitool_ramming[initial_tool]}500{else}170{endif} ; purge while moving towards the sheet\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40)} E9 F800 ; continue purging and wipe the nozzle\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3)} Z{0.05} F{8000} ; wipe, move close to the bed\nG0 X{(initial_tool == 0 ? 0 : (initial_tool == 1 ? 120 : (initial_tool == 2 ? 180 : 300))) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 40) + ((initial_tool == 0 or initial_tool == 2 ? 1 : -1) * 3 * 2)} Z0.2 F{8000} ; wipe, move quickly away from the bed\nG1 E{- 1.5 * retract_length[initial_tool]} F2400 ; retract\n{e_retracted[initial_tool] = 1.5 * retract_length[initial_tool]}\nG92 E0 ; reset extruder position\n", "scan_first_layer": "0", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine", + "undefine" + ], "auxiliary_fan": "0" } diff --git a/resources/profiles/Custom/process/0.08mm Extra Fine @MyKlipper.json b/resources/profiles/Custom/process/0.08mm Extra Fine @MyKlipper.json index 4cebf36eaa..1c52b7de5d 100644 --- a/resources/profiles/Custom/process/0.08mm Extra Fine @MyKlipper.json +++ b/resources/profiles/Custom/process/0.08mm Extra Fine @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "qC4SXEgZNVB9eWNQ", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.08", "bottom_shell_layers": "7", "top_shell_layers": "9", diff --git a/resources/profiles/Custom/process/0.08mm Extra Fine @MyMarlin.json b/resources/profiles/Custom/process/0.08mm Extra Fine @MyMarlin.json index 70c78226a5..5c7847846e 100644 --- a/resources/profiles/Custom/process/0.08mm Extra Fine @MyMarlin.json +++ b/resources/profiles/Custom/process/0.08mm Extra Fine @MyMarlin.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "F0QIJviBIYDJjJe2", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.08", "bottom_shell_layers": "7", "top_shell_layers": "9" diff --git a/resources/profiles/Custom/process/0.08mm Extra Fine @MyRRF.json b/resources/profiles/Custom/process/0.08mm Extra Fine @MyRRF.json index 1c5392cae6..54085435ad 100644 --- a/resources/profiles/Custom/process/0.08mm Extra Fine @MyRRF.json +++ b/resources/profiles/Custom/process/0.08mm Extra Fine @MyRRF.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "zhi1tw9y210xSTmh", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.08", "bottom_shell_layers": "7", "top_shell_layers": "9" diff --git a/resources/profiles/Custom/process/0.08mm Extra Fine @MyToolChanger.json b/resources/profiles/Custom/process/0.08mm Extra Fine @MyToolChanger.json index 17f9df6cac..d1576584e6 100644 --- a/resources/profiles/Custom/process/0.08mm Extra Fine @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.08mm Extra Fine @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "Xt1tNqoffQCMWaDF", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.08", "bottom_shell_layers": "7", "top_shell_layers": "9", diff --git a/resources/profiles/Custom/process/0.12mm Fine @MyKlipper.json b/resources/profiles/Custom/process/0.12mm Fine @MyKlipper.json index e275ffeb1a..6cfed675ba 100644 --- a/resources/profiles/Custom/process/0.12mm Fine @MyKlipper.json +++ b/resources/profiles/Custom/process/0.12mm Fine @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "guUxwo1j4TPACM0Z", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.12", "bottom_shell_layers": "5", "top_shell_layers": "6", diff --git a/resources/profiles/Custom/process/0.12mm Fine @MyMarlin.json b/resources/profiles/Custom/process/0.12mm Fine @MyMarlin.json index 64916a585a..6cc4a2520f 100644 --- a/resources/profiles/Custom/process/0.12mm Fine @MyMarlin.json +++ b/resources/profiles/Custom/process/0.12mm Fine @MyMarlin.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "p7cD7BCjLQtah9z8", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.12", "bottom_shell_layers": "5", "top_shell_layers": "6" diff --git a/resources/profiles/Custom/process/0.12mm Fine @MyRRF.json b/resources/profiles/Custom/process/0.12mm Fine @MyRRF.json index 2d30168abf..99d504fda5 100644 --- a/resources/profiles/Custom/process/0.12mm Fine @MyRRF.json +++ b/resources/profiles/Custom/process/0.12mm Fine @MyRRF.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "Zj9uGAyf8yYuHwRQ", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.12", "bottom_shell_layers": "5", "top_shell_layers": "6" diff --git a/resources/profiles/Custom/process/0.12mm Fine @MyToolChanger.json b/resources/profiles/Custom/process/0.12mm Fine @MyToolChanger.json index 5e3e23f000..840eb680c4 100644 --- a/resources/profiles/Custom/process/0.12mm Fine @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.12mm Fine @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "RjRwftLktZM6uz3u", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.12", "bottom_shell_layers": "5", "top_shell_layers": "6", diff --git a/resources/profiles/Custom/process/0.15mm Optimal @MyKlipper.json b/resources/profiles/Custom/process/0.15mm Optimal @MyKlipper.json index 9036023f45..dd8ff191cb 100644 --- a/resources/profiles/Custom/process/0.15mm Optimal @MyKlipper.json +++ b/resources/profiles/Custom/process/0.15mm Optimal @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "CiHtbxYtXnT5bdRM", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "bottom_shell_layers": "4", "top_shell_layers": "5", "layer_height": "0.15", diff --git a/resources/profiles/Custom/process/0.15mm Optimal @MyMarlin.json b/resources/profiles/Custom/process/0.15mm Optimal @MyMarlin.json index 13236b3640..1c3dfa5239 100644 --- a/resources/profiles/Custom/process/0.15mm Optimal @MyMarlin.json +++ b/resources/profiles/Custom/process/0.15mm Optimal @MyMarlin.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "gkXHi7QQxtxIy9V9", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "bottom_shell_layers": "4", "top_shell_layers": "5", "layer_height": "0.15" diff --git a/resources/profiles/Custom/process/0.15mm Optimal @MyRRF.json b/resources/profiles/Custom/process/0.15mm Optimal @MyRRF.json index dd2d25490e..9d2ba95304 100644 --- a/resources/profiles/Custom/process/0.15mm Optimal @MyRRF.json +++ b/resources/profiles/Custom/process/0.15mm Optimal @MyRRF.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "TcZOJuBSFK5kB1H8", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "bottom_shell_layers": "4", "top_shell_layers": "5", "layer_height": "0.15" diff --git a/resources/profiles/Custom/process/0.15mm Optimal @MyToolChanger.json b/resources/profiles/Custom/process/0.15mm Optimal @MyToolChanger.json index 67c34009a8..6758afab14 100644 --- a/resources/profiles/Custom/process/0.15mm Optimal @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.15mm Optimal @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "kZG2HcARq8ZFzUk9", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "bottom_shell_layers": "4", "top_shell_layers": "5", "layer_height": "0.15", diff --git a/resources/profiles/Custom/process/0.16mm Optimal @MyKlipper.json b/resources/profiles/Custom/process/0.16mm Optimal @MyKlipper.json index 1a1d9a60b1..1718a8a931 100644 --- a/resources/profiles/Custom/process/0.16mm Optimal @MyKlipper.json +++ b/resources/profiles/Custom/process/0.16mm Optimal @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "qMjBH8WRooCfhtTP", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "bottom_shell_layers": "4", "top_shell_layers": "5", "support_top_z_distance": "0.16", diff --git a/resources/profiles/Custom/process/0.16mm Optimal @MyToolChanger.json b/resources/profiles/Custom/process/0.16mm Optimal @MyToolChanger.json index fd035549f6..683c8d29e9 100644 --- a/resources/profiles/Custom/process/0.16mm Optimal @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.16mm Optimal @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "99y1EZwxDuKQwzv3", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "bottom_shell_layers": "4", "top_shell_layers": "5", "support_top_z_distance": "0.16", diff --git a/resources/profiles/Custom/process/0.20mm Standard @MyKlipper.json b/resources/profiles/Custom/process/0.20mm Standard @MyKlipper.json index bb7c196823..34266e7168 100644 --- a/resources/profiles/Custom/process/0.20mm Standard @MyKlipper.json +++ b/resources/profiles/Custom/process/0.20mm Standard @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "UkxcnbdZ2LeRvO4x", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.2", "compatible_printers": [ "MyKlipper 0.4 nozzle", diff --git a/resources/profiles/Custom/process/0.20mm Standard @MyMarlin.json b/resources/profiles/Custom/process/0.20mm Standard @MyMarlin.json index 9ea731097b..78b61e3610 100644 --- a/resources/profiles/Custom/process/0.20mm Standard @MyMarlin.json +++ b/resources/profiles/Custom/process/0.20mm Standard @MyMarlin.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "zZztMlYzzLA0KiTz", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.2", "bottom_shell_layers": "3", "top_shell_layers": "4" diff --git a/resources/profiles/Custom/process/0.20mm Standard @MyRRF.json b/resources/profiles/Custom/process/0.20mm Standard @MyRRF.json index 4c17f18134..ad41f0b413 100644 --- a/resources/profiles/Custom/process/0.20mm Standard @MyRRF.json +++ b/resources/profiles/Custom/process/0.20mm Standard @MyRRF.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "UFkBAddrcwXsuoVt", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.2", "bottom_shell_layers": "3", "top_shell_layers": "4" diff --git a/resources/profiles/Custom/process/0.20mm Standard @MyRepetier.json b/resources/profiles/Custom/process/0.20mm Standard @MyRepetier.json index 63023f1cb5..735b628335 100644 --- a/resources/profiles/Custom/process/0.20mm Standard @MyRepetier.json +++ b/resources/profiles/Custom/process/0.20mm Standard @MyRepetier.json @@ -5,7 +5,17 @@ "from": "system", "setting_id": "Ny9kvyQ0UjkVAUiY", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.2", "bottom_shell_layers": "3", "top_shell_layers": "4" -} \ No newline at end of file +} diff --git a/resources/profiles/Custom/process/0.20mm Standard @MyToolChanger.json b/resources/profiles/Custom/process/0.20mm Standard @MyToolChanger.json index 53dc9dc6c7..9706cd10b5 100644 --- a/resources/profiles/Custom/process/0.20mm Standard @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.20mm Standard @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "MHpNmkShui6fTwVu", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.2", "compatible_printers": [ "MyToolChanger 0.4 nozzle", diff --git a/resources/profiles/Custom/process/0.24mm Draft @MyKlipper.json b/resources/profiles/Custom/process/0.24mm Draft @MyKlipper.json index f54829e461..80191bedea 100644 --- a/resources/profiles/Custom/process/0.24mm Draft @MyKlipper.json +++ b/resources/profiles/Custom/process/0.24mm Draft @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "E5SAhAOy240BOYOB", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.2", "support_bottom_z_distance": "0.2", "layer_height": "0.24", diff --git a/resources/profiles/Custom/process/0.24mm Draft @MyMarlin.json b/resources/profiles/Custom/process/0.24mm Draft @MyMarlin.json index 2f75b3af69..c3ab4c7dcf 100644 --- a/resources/profiles/Custom/process/0.24mm Draft @MyMarlin.json +++ b/resources/profiles/Custom/process/0.24mm Draft @MyMarlin.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "HjdvHJl5dBqwwOiq", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.24", "top_surface_line_width": "0.45", "bottom_shell_layers": "3", diff --git a/resources/profiles/Custom/process/0.24mm Draft @MyRRF.json b/resources/profiles/Custom/process/0.24mm Draft @MyRRF.json index 4da6be51ee..0561313f06 100644 --- a/resources/profiles/Custom/process/0.24mm Draft @MyRRF.json +++ b/resources/profiles/Custom/process/0.24mm Draft @MyRRF.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "lh4F2302iVSyXP0D", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.24", "top_surface_line_width": "0.45", "bottom_shell_layers": "3", diff --git a/resources/profiles/Custom/process/0.24mm Draft @MyToolChanger.json b/resources/profiles/Custom/process/0.24mm Draft @MyToolChanger.json index b16f1bcf0c..b3d7f7c91d 100644 --- a/resources/profiles/Custom/process/0.24mm Draft @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.24mm Draft @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "2V93QpRMBE9OU5Ak", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.2", "support_bottom_z_distance": "0.2", "layer_height": "0.24", diff --git a/resources/profiles/Custom/process/0.28mm Extra Draft @MyKlipper.json b/resources/profiles/Custom/process/0.28mm Extra Draft @MyKlipper.json index 0a9a9c3316..6c7aeb10fd 100644 --- a/resources/profiles/Custom/process/0.28mm Extra Draft @MyKlipper.json +++ b/resources/profiles/Custom/process/0.28mm Extra Draft @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "Wxgntm1oFqaS5sSD", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.28", "initial_layer_print_height": "0.2", "compatible_printers": [ diff --git a/resources/profiles/Custom/process/0.28mm Extra Draft @MyMarlin.json b/resources/profiles/Custom/process/0.28mm Extra Draft @MyMarlin.json index dc59a3bc35..4bbb83dcd2 100644 --- a/resources/profiles/Custom/process/0.28mm Extra Draft @MyMarlin.json +++ b/resources/profiles/Custom/process/0.28mm Extra Draft @MyMarlin.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "FPRthCpiEQtZgF7W", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.28", "top_surface_line_width": "0.45", "bottom_shell_layers": "3", diff --git a/resources/profiles/Custom/process/0.28mm Extra Draft @MyRRF.json b/resources/profiles/Custom/process/0.28mm Extra Draft @MyRRF.json index 09c9dba77c..f41c7a1b13 100644 --- a/resources/profiles/Custom/process/0.28mm Extra Draft @MyRRF.json +++ b/resources/profiles/Custom/process/0.28mm Extra Draft @MyRRF.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "KWkOr3YqJ2Jf3UAF", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.28", "top_surface_line_width": "0.45", "bottom_shell_layers": "3", diff --git a/resources/profiles/Custom/process/0.28mm Extra Draft @MyToolChanger.json b/resources/profiles/Custom/process/0.28mm Extra Draft @MyToolChanger.json index d069bcc819..2fab506db7 100644 --- a/resources/profiles/Custom/process/0.28mm Extra Draft @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.28mm Extra Draft @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "q6Bc7ar365O7vKe3", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "layer_height": "0.28", "initial_layer_print_height": "0.2", "compatible_printers": [ diff --git a/resources/profiles/Custom/process/0.32mm Extra Draft @MyKlipper.json b/resources/profiles/Custom/process/0.32mm Extra Draft @MyKlipper.json index 4db0c96be0..57ac63f76b 100644 --- a/resources/profiles/Custom/process/0.32mm Extra Draft @MyKlipper.json +++ b/resources/profiles/Custom/process/0.32mm Extra Draft @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "b3MuRrAWKYtKZM79", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.24", "support_bottom_z_distance": "0.24", "layer_height": "0.32", diff --git a/resources/profiles/Custom/process/0.32mm Extra Draft @MyToolChanger.json b/resources/profiles/Custom/process/0.32mm Extra Draft @MyToolChanger.json index 0dcd2fb762..df929ad1b7 100644 --- a/resources/profiles/Custom/process/0.32mm Extra Draft @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.32mm Extra Draft @MyToolChanger.json @@ -6,6 +6,40 @@ "from": "system", "setting_id": "7cM9iT4GyGhmfwHu", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.24", "support_bottom_z_distance": "0.24", "layer_height": "0.32", diff --git a/resources/profiles/Custom/process/0.40mm Extra Draft @MyKlipper.json b/resources/profiles/Custom/process/0.40mm Extra Draft @MyKlipper.json index 74bce75980..eb66511d10 100644 --- a/resources/profiles/Custom/process/0.40mm Extra Draft @MyKlipper.json +++ b/resources/profiles/Custom/process/0.40mm Extra Draft @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "bc0WLUlEcdg9LWE5", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.24", "support_bottom_z_distance": "0.24", "layer_height": "0.40", diff --git a/resources/profiles/Custom/process/0.40mm Extra Draft @MyToolChanger.json b/resources/profiles/Custom/process/0.40mm Extra Draft @MyToolChanger.json index 4922fdb747..365fc27fd9 100644 --- a/resources/profiles/Custom/process/0.40mm Extra Draft @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.40mm Extra Draft @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "BnN85WtRYfMwpdV0", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.24", "support_bottom_z_distance": "0.24", "layer_height": "0.40", diff --git a/resources/profiles/Custom/process/0.56mm Extra Draft @MyKlipper.json b/resources/profiles/Custom/process/0.56mm Extra Draft @MyKlipper.json index f470958a24..f81887191a 100644 --- a/resources/profiles/Custom/process/0.56mm Extra Draft @MyKlipper.json +++ b/resources/profiles/Custom/process/0.56mm Extra Draft @MyKlipper.json @@ -5,6 +5,16 @@ "from": "system", "setting_id": "ivoHEUPxZxSxGmrh", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.24", "support_bottom_z_distance": "0.24", "layer_height": "0.56", diff --git a/resources/profiles/Custom/process/0.56mm Extra Draft @MyToolChanger.json b/resources/profiles/Custom/process/0.56mm Extra Draft @MyToolChanger.json index 226610bfc2..3b380c1868 100644 --- a/resources/profiles/Custom/process/0.56mm Extra Draft @MyToolChanger.json +++ b/resources/profiles/Custom/process/0.56mm Extra Draft @MyToolChanger.json @@ -5,6 +5,40 @@ "from": "system", "setting_id": "Pky5GvEuSlaG1Lvm", "instantiation": "true", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "support_top_z_distance": "0.24", "support_bottom_z_distance": "0.24", "layer_height": "0.56", diff --git a/resources/profiles/Custom/process/fdm_process_common.json b/resources/profiles/Custom/process/fdm_process_common.json index 0d558129af..55b4a58665 100644 --- a/resources/profiles/Custom/process/fdm_process_common.json +++ b/resources/profiles/Custom/process/fdm_process_common.json @@ -3,22 +3,60 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", "bottom_shell_thickness": "0", - "bridge_speed": "50", + "bridge_speed": [ + "50", + "50", + "50" + ], "brim_width": "5", "brim_object_gap": "0.1", "compatible_printers": [], "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "1000", - "initial_layer_acceleration": "500", - "top_surface_acceleration": "1000", - "travel_acceleration": "1000", - "inner_wall_acceleration": "1000", - "outer_wall_acceleration": "700", + "default_acceleration": [ + "1000", + "1000", + "1000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "top_surface_acceleration": [ + "1000", + "1000", + "1000" + ], + "travel_acceleration": [ + "1000", + "1000", + "1000" + ], + "inner_wall_acceleration": [ + "1000", + "1000", + "1000" + ], + "outer_wall_acceleration": [ + "700", + "700", + "700" + ], "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", @@ -38,11 +76,31 @@ "reduce_infill_retraction": "1", "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode", "detect_overhang_wall": "1", - "slowdown_for_curled_perimeters": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", + "slowdown_for_curled_perimeters": [ + "1", + "1", + "1" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], "line_width": "110%", "inner_wall_line_width": "110%", "outer_wall_line_width": "100%", @@ -74,10 +132,18 @@ "support_interface_top_layers": "2", "support_interface_bottom_layers": "2", "support_interface_spacing": "0.5", - "support_interface_speed": "80", + "support_interface_speed": [ + "80", + "80", + "80" + ], "support_base_pattern": "default", "support_base_pattern_spacing": "2.5", - "support_speed": "150", + "support_speed": [ + "150", + "150", + "150" + ], "support_threshold_angle": "30", "support_object_xy_distance": "0.35", "tree_support_branch_angle": "30", @@ -94,13 +160,49 @@ "bottom_shell_layers": "3", "top_shell_layers": "4", "bridge_flow": "1", - "initial_layer_speed": "45", - "initial_layer_infill_speed": "45", - "outer_wall_speed": "45", - "inner_wall_speed": "80", - "sparse_infill_speed": "150", - "internal_solid_infill_speed": "150", - "top_surface_speed": "50", - "gap_infill_speed": "30", - "travel_speed": "200" + "initial_layer_speed": [ + "45", + "45", + "45" + ], + "initial_layer_infill_speed": [ + "45", + "45", + "45" + ], + "outer_wall_speed": [ + "45", + "45", + "45" + ], + "inner_wall_speed": [ + "80", + "80", + "80" + ], + "sparse_infill_speed": [ + "150", + "150", + "150" + ], + "internal_solid_infill_speed": [ + "150", + "150", + "150" + ], + "top_surface_speed": [ + "50", + "50", + "50" + ], + "gap_infill_speed": [ + "30", + "30", + "30" + ], + "travel_speed": [ + "200", + "200", + "200" + ] } diff --git a/resources/profiles/Custom/process/fdm_process_klipper_common.json b/resources/profiles/Custom/process/fdm_process_klipper_common.json index 2977d9392a..d24268b0c6 100644 --- a/resources/profiles/Custom/process/fdm_process_klipper_common.json +++ b/resources/profiles/Custom/process/fdm_process_klipper_common.json @@ -4,20 +4,90 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", - "default_acceleration": "5000", - "top_surface_acceleration": "3000", - "travel_acceleration": "7000", - "inner_wall_acceleration": "5000", - "outer_wall_acceleration": "3000", - "initial_layer_acceleration": "500", - "initial_layer_speed": "50", - "initial_layer_infill_speed": "105", - "outer_wall_speed": "120", - "inner_wall_speed": "200", - "internal_solid_infill_speed": "200", - "top_surface_speed": "100", - "gap_infill_speed": "100", - "sparse_infill_speed": "200", - "travel_speed": "350", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "default_acceleration": [ + "5000", + "5000", + "5000" + ], + "top_surface_acceleration": [ + "3000", + "3000", + "3000" + ], + "travel_acceleration": [ + "7000", + "7000", + "7000" + ], + "inner_wall_acceleration": [ + "5000", + "5000", + "5000" + ], + "outer_wall_acceleration": [ + "3000", + "3000", + "3000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], + "initial_layer_speed": [ + "50", + "50", + "50" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "outer_wall_speed": [ + "120", + "120", + "120" + ], + "inner_wall_speed": [ + "200", + "200", + "200" + ], + "internal_solid_infill_speed": [ + "200", + "200", + "200" + ], + "top_surface_speed": [ + "100", + "100", + "100" + ], + "gap_infill_speed": [ + "100", + "100", + "100" + ], + "sparse_infill_speed": [ + "200", + "200", + "200" + ], + "travel_speed": [ + "350", + "350", + "350" + ], "exclude_object": "1" } diff --git a/resources/profiles/Custom/process/fdm_process_marlin_common.json b/resources/profiles/Custom/process/fdm_process_marlin_common.json index 5f5c10f173..f15c13984b 100644 --- a/resources/profiles/Custom/process/fdm_process_marlin_common.json +++ b/resources/profiles/Custom/process/fdm_process_marlin_common.json @@ -4,22 +4,56 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "0.95", - "bridge_speed": "50", + "bridge_speed": [ + "50", + "50", + "50" + ], "brim_width": "5", "brim_object_gap": "0.1", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "1000", - "top_surface_acceleration": "1000", - "travel_acceleration": "1000", - "inner_wall_acceleration": "1000", - "outer_wall_acceleration": "1000", + "default_acceleration": [ + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "1000", + "1000", + "1000" + ], + "travel_acceleration": [ + "1000", + "1000", + "1000" + ], + "inner_wall_acceleration": [ + "1000", + "1000", + "1000" + ], + "outer_wall_acceleration": [ + "1000", + "1000", + "1000" + ], "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", @@ -29,7 +63,11 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "initial_layer_acceleration": "500", + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", "infill_combination": "0", @@ -44,10 +82,26 @@ "reduce_infill_retraction": "1", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", + "overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], "inner_wall_line_width": "0.45", "wall_loops": "3", "print_settings_id": "", @@ -73,10 +127,18 @@ "support_interface_top_layers": "2", "support_interface_bottom_layers": "2", "support_interface_spacing": "0.5", - "support_interface_speed": "40", + "support_interface_speed": [ + "40", + "40", + "40" + ], "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "60", + "support_speed": [ + "60", + "60", + "60" + ], "support_threshold_angle": "30", "support_object_xy_distance": "0.35", "tree_support_branch_angle": "45", @@ -86,15 +148,51 @@ "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", - "initial_layer_speed": "45", - "initial_layer_infill_speed": "60", - "outer_wall_speed": "60", - "inner_wall_speed": "80", - "internal_solid_infill_speed": "80", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "sparse_infill_speed": "80", - "travel_speed": "150", + "initial_layer_speed": [ + "45", + "45", + "45" + ], + "initial_layer_infill_speed": [ + "60", + "60", + "60" + ], + "outer_wall_speed": [ + "60", + "60", + "60" + ], + "inner_wall_speed": [ + "80", + "80", + "80" + ], + "internal_solid_infill_speed": [ + "80", + "80", + "80" + ], + "top_surface_speed": [ + "50", + "50", + "50" + ], + "gap_infill_speed": [ + "80", + "80", + "80" + ], + "sparse_infill_speed": [ + "80", + "80", + "80" + ], + "travel_speed": [ + "150", + "150", + "150" + ], "enable_prime_tower": "1", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Custom/process/fdm_process_mytoolchanger_common.json b/resources/profiles/Custom/process/fdm_process_mytoolchanger_common.json index 95b1b8b497..764a2220c6 100644 --- a/resources/profiles/Custom/process/fdm_process_mytoolchanger_common.json +++ b/resources/profiles/Custom/process/fdm_process_mytoolchanger_common.json @@ -4,21 +4,431 @@ "inherits": "fdm_process_klipper_common", "from": "system", "instantiation": "false", - "default_acceleration": "5000", - "top_surface_acceleration": "3000", - "travel_acceleration": "7000", - "inner_wall_acceleration": "5000", - "outer_wall_acceleration": "3000", - "initial_layer_acceleration": "500", - "initial_layer_speed": "50", - "initial_layer_infill_speed": "105", - "outer_wall_speed": "120", - "inner_wall_speed": "200", - "internal_solid_infill_speed": "200", - "top_surface_speed": "100", - "gap_infill_speed": "100", - "sparse_infill_speed": "200", - "travel_speed": "350", + "print_extruder_id": [ + "1", + "1", + "1", + "2", + "2", + "2", + "3", + "3", + "3", + "4", + "4", + "4", + "5", + "5", + "5" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], + "default_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "top_surface_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "travel_acceleration": [ + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000", + "7000" + ], + "inner_wall_acceleration": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", + "5000" + ], + "outer_wall_acceleration": [ + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000", + "3000" + ], + "initial_layer_acceleration": [ + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500", + "500" + ], + "initial_layer_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105", + "105" + ], + "outer_wall_speed": [ + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120", + "120" + ], + "inner_wall_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], + "internal_solid_infill_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], + "top_surface_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100" + ], + "gap_infill_speed": [ + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100", + "100" + ], + "sparse_infill_speed": [ + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200", + "200" + ], + "travel_speed": [ + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350", + "350" + ], + "bridge_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "slowdown_for_curled_perimeters": [ + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1", + "1" + ], + "overhang_1_4_speed": [ + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10", + "10" + ], + "support_interface_speed": [ + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80", + "80" + ], + "support_speed": [ + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150", + "150" + ], "exclude_object": "1", "enable_prime_tower": "1", "wipe_tower_cone_angle": "25", diff --git a/resources/profiles/Custom/process/fdm_process_repetier_common.json b/resources/profiles/Custom/process/fdm_process_repetier_common.json index 66df7ad018..daeab13e8e 100644 --- a/resources/profiles/Custom/process/fdm_process_repetier_common.json +++ b/resources/profiles/Custom/process/fdm_process_repetier_common.json @@ -4,22 +4,56 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "0.95", - "bridge_speed": "50", + "bridge_speed": [ + "50", + "50", + "50" + ], "brim_width": "5", "brim_object_gap": "0.1", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "1000", - "top_surface_acceleration": "1000", - "travel_acceleration": "1000", - "inner_wall_acceleration": "1000", - "outer_wall_acceleration": "1000", + "default_acceleration": [ + "1000", + "1000", + "1000" + ], + "top_surface_acceleration": [ + "1000", + "1000", + "1000" + ], + "travel_acceleration": [ + "1000", + "1000", + "1000" + ], + "inner_wall_acceleration": [ + "1000", + "1000", + "1000" + ], + "outer_wall_acceleration": [ + "1000", + "1000", + "1000" + ], "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", @@ -29,7 +63,11 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "initial_layer_acceleration": "500", + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", "infill_combination": "0", @@ -44,10 +82,26 @@ "reduce_infill_retraction": "1", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", + "overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], "inner_wall_line_width": "0.45", "wall_loops": "3", "print_settings_id": "", @@ -73,10 +127,18 @@ "support_interface_top_layers": "2", "support_interface_bottom_layers": "2", "support_interface_spacing": "0.5", - "support_interface_speed": "40", + "support_interface_speed": [ + "40", + "40", + "40" + ], "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "60", + "support_speed": [ + "60", + "60", + "60" + ], "support_threshold_angle": "30", "support_object_xy_distance": "0.35", "tree_support_branch_angle": "45", @@ -86,15 +148,51 @@ "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", - "initial_layer_speed": "45", - "initial_layer_infill_speed": "60", - "outer_wall_speed": "60", - "inner_wall_speed": "80", - "internal_solid_infill_speed": "80", - "top_surface_speed": "50", - "gap_infill_speed": "80", - "sparse_infill_speed": "80", - "travel_speed": "150", + "initial_layer_speed": [ + "45", + "45", + "45" + ], + "initial_layer_infill_speed": [ + "60", + "60", + "60" + ], + "outer_wall_speed": [ + "60", + "60", + "60" + ], + "inner_wall_speed": [ + "80", + "80", + "80" + ], + "internal_solid_infill_speed": [ + "80", + "80", + "80" + ], + "top_surface_speed": [ + "50", + "50", + "50" + ], + "gap_infill_speed": [ + "80", + "80", + "80" + ], + "sparse_infill_speed": [ + "80", + "80", + "80" + ], + "travel_speed": [ + "150", + "150", + "150" + ], "enable_prime_tower": "1", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/Custom/process/fdm_process_rrf_common.json b/resources/profiles/Custom/process/fdm_process_rrf_common.json index 469ca6ecfd..a87cc59602 100644 --- a/resources/profiles/Custom/process/fdm_process_rrf_common.json +++ b/resources/profiles/Custom/process/fdm_process_rrf_common.json @@ -4,22 +4,56 @@ "inherits": "fdm_process_common", "from": "system", "instantiation": "false", + "print_extruder_id": [ + "1", + "1", + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow" + ], "reduce_crossing_wall": "0", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", "bottom_shell_layers": "3", "bottom_shell_thickness": "0", "bridge_flow": "0.95", - "bridge_speed": "50", + "bridge_speed": [ + "50", + "50", + "50" + ], "brim_width": "5", "brim_object_gap": "0.1", "compatible_printers_condition": "", "print_sequence": "by layer", - "default_acceleration": "5000", - "top_surface_acceleration": "3000", - "travel_acceleration": "7000", - "inner_wall_acceleration": "5000", - "outer_wall_acceleration": "3000", + "default_acceleration": [ + "5000", + "5000", + "5000" + ], + "top_surface_acceleration": [ + "3000", + "3000", + "3000" + ], + "travel_acceleration": [ + "7000", + "7000", + "7000" + ], + "inner_wall_acceleration": [ + "5000", + "5000", + "5000" + ], + "outer_wall_acceleration": [ + "3000", + "3000", + "3000" + ], "bridge_no_support": "0", "draft_shield": "disabled", "elefant_foot_compensation": "0", @@ -29,7 +63,11 @@ "infill_direction": "45", "sparse_infill_density": "15%", "sparse_infill_pattern": "crosshatch", - "initial_layer_acceleration": "500", + "initial_layer_acceleration": [ + "500", + "500", + "500" + ], "initial_layer_line_width": "0.5", "initial_layer_print_height": "0.2", "infill_combination": "0", @@ -44,10 +82,26 @@ "reduce_infill_retraction": "1", "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", + "overhang_1_4_speed": [ + "0", + "0", + "0" + ], + "overhang_2_4_speed": [ + "50", + "50", + "50" + ], + "overhang_3_4_speed": [ + "30", + "30", + "30" + ], + "overhang_4_4_speed": [ + "10", + "10", + "10" + ], "inner_wall_line_width": "0.45", "wall_loops": "3", "print_settings_id": "", @@ -73,10 +127,18 @@ "support_interface_top_layers": "2", "support_interface_bottom_layers": "2", "support_interface_spacing": "0.5", - "support_interface_speed": "80", + "support_interface_speed": [ + "80", + "80", + "80" + ], "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "2.5", - "support_speed": "150", + "support_speed": [ + "150", + "150", + "150" + ], "support_threshold_angle": "30", "support_object_xy_distance": "0.35", "tree_support_branch_angle": "45", @@ -86,15 +148,51 @@ "top_surface_line_width": "0.4", "top_shell_layers": "3", "top_shell_thickness": "0.8", - "initial_layer_speed": "50", - "initial_layer_infill_speed": "105", - "outer_wall_speed": "120", - "inner_wall_speed": "200", - "internal_solid_infill_speed": "200", - "top_surface_speed": "100", - "gap_infill_speed": "100", - "sparse_infill_speed": "200", - "travel_speed": "350", + "initial_layer_speed": [ + "50", + "50", + "50" + ], + "initial_layer_infill_speed": [ + "105", + "105", + "105" + ], + "outer_wall_speed": [ + "120", + "120", + "120" + ], + "inner_wall_speed": [ + "200", + "200", + "200" + ], + "internal_solid_infill_speed": [ + "200", + "200", + "200" + ], + "top_surface_speed": [ + "100", + "100", + "100" + ], + "gap_infill_speed": [ + "100", + "100", + "100" + ], + "sparse_infill_speed": [ + "200", + "200", + "200" + ], + "travel_speed": [ + "350", + "350", + "350" + ], "enable_prime_tower": "1", "wipe_tower_no_sparse_layers": "0", "prime_tower_width": "60", diff --git a/resources/profiles/DeltaMaker.json b/resources/profiles/DeltaMaker.json index 6ef943d248..b65109ef68 100755 --- a/resources/profiles/DeltaMaker.json +++ b/resources/profiles/DeltaMaker.json @@ -1,7 +1,7 @@ { "name": "DeltaMaker", "url": "", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "DeltaMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/DeltaMaker/filament/Generic PETG @DeltaMaker.json b/resources/profiles/DeltaMaker/filament/Generic PETG @DeltaMaker.json index a31ad9aec5..a6a788e47e 100755 --- a/resources/profiles/DeltaMaker/filament/Generic PETG @DeltaMaker.json +++ b/resources/profiles/DeltaMaker/filament/Generic PETG @DeltaMaker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @DeltaMaker", - "inherits": "fdm_filament_pet", "renamed_from": "DeltaMaker Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "XmKr3I3RjeI3hm6F", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/DeltaMaker/filament/Generic PLA @DeltaMaker.json b/resources/profiles/DeltaMaker/filament/Generic PLA @DeltaMaker.json index 2e2b626feb..7c448a26f4 100755 --- a/resources/profiles/DeltaMaker/filament/Generic PLA @DeltaMaker.json +++ b/resources/profiles/DeltaMaker/filament/Generic PLA @DeltaMaker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @DeltaMaker", - "inherits": "fdm_filament_pla", "renamed_from": "DeltaMaker Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "ITJo0Cig9myqk1uB", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/DeltaMaker/filament/Generic TPU @DeltaMaker.json b/resources/profiles/DeltaMaker/filament/Generic TPU @DeltaMaker.json index edfc8a1cd2..94a62d4d78 100755 --- a/resources/profiles/DeltaMaker/filament/Generic TPU @DeltaMaker.json +++ b/resources/profiles/DeltaMaker/filament/Generic TPU @DeltaMaker.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @DeltaMaker", - "inherits": "fdm_filament_tpu", "renamed_from": "DeltaMaker Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "uWHBbbhFzvWq0qUP", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Dremel.json b/resources/profiles/Dremel.json index 3d804f6a1b..a57e18fcad 100644 --- a/resources/profiles/Dremel.json +++ b/resources/profiles/Dremel.json @@ -1,6 +1,6 @@ { "name": "Dremel", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "Dremel configurations", "machine_model_list": [ diff --git a/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D20 all.json b/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D20 all.json index 2dbcc6184e..9c3d6d69af 100644 --- a/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D20 all.json +++ b/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D20 all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Dremel 3D20 all", - "inherits": "fdm_filament_pla", "renamed_from": "Dremel Generic PLA @3D20 all;Dremel Generic PLA 3D20 all", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "UggXEvCig0b6S8Vx", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D40 all.json b/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D40 all.json index 03704ce5e9..2a2c9dfa6b 100644 --- a/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D40 all.json +++ b/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D40 all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Dremel 3D40 all", - "inherits": "fdm_filament_pla", "renamed_from": "Dremel Generic PLA @3D40 all;Dremel Generic PLA 3D40 all", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "VUOtsWfy46cvAyBT", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D45 all.json b/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D45 all.json index 78f747e0f9..9b44661579 100644 --- a/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D45 all.json +++ b/resources/profiles/Dremel/filament/Generic PLA @Dremel 3D45 all.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Dremel 3D45 all", - "inherits": "fdm_filament_pla", "renamed_from": "Dremel Generic PLA @3D45 all;Dremel Generic PLA 3D45 all", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "qEeBb3Pix2iDT3SD", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Elegoo.json b/resources/profiles/Elegoo.json index b2e2c21f14..e85c442406 100644 --- a/resources/profiles/Elegoo.json +++ b/resources/profiles/Elegoo.json @@ -1,6 +1,6 @@ { "name": "Elegoo", - "version": "02.04.00.09", + "version": "02.04.00.12", "force_update": "0", "description": "Elegoo configurations", "machine_model_list": [ diff --git a/resources/profiles/Elegoo/Elegoo Centauri 2_cover.png b/resources/profiles/Elegoo/Elegoo Centauri 2_cover.png index d836650597..197aab0111 100644 Binary files a/resources/profiles/Elegoo/Elegoo Centauri 2_cover.png and b/resources/profiles/Elegoo/Elegoo Centauri 2_cover.png differ diff --git a/resources/profiles/Elegoo/filament/BASE/Elegoo PLA @base.json b/resources/profiles/Elegoo/filament/BASE/Elegoo PLA @base.json index 8965bae8e1..21112c1791 100644 --- a/resources/profiles/Elegoo/filament/BASE/Elegoo PLA @base.json +++ b/resources/profiles/Elegoo/filament/BASE/Elegoo PLA @base.json @@ -15,6 +15,6 @@ "Elegoo" ], "filament_start_gcode": [ - "; filament start gcode\n" + "; Elegoo PLA filament start gcode\n" ] } diff --git a/resources/profiles/Elegoo/filament/ELEGOO_02_NOZZLE/Elegoo PLA @0.2 nozzle.json b/resources/profiles/Elegoo/filament/ELEGOO_02_NOZZLE/Elegoo PLA @0.2 nozzle.json index 9bfeb0529c..489de9c25e 100644 --- a/resources/profiles/Elegoo/filament/ELEGOO_02_NOZZLE/Elegoo PLA @0.2 nozzle.json +++ b/resources/profiles/Elegoo/filament/ELEGOO_02_NOZZLE/Elegoo PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Elegoo PLA @0.2 nozzle", + "inherits": "Elegoo PLA @base", "from": "system", "setting_id": "g5M60iK3oBpmDv68", "instantiation": "true", - "inherits": "Elegoo PLA @base", "filament_max_volumetric_speed": [ "3.2" ], diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json index fca1b001a8..186df48f9d 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo ASA @Elegoo Giga", + "renamed_from": "Elegoo ASA @EOS Giga", "inherits": "Elegoo ASA @base", "from": "system", "setting_id": "YEKtGrB8gsvKz8XQ", @@ -19,6 +20,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo ASA @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG @Elegoo Giga.json index fa02324356..eb3d9bddbe 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PETG @Elegoo Giga", + "renamed_from": "Elegoo PETG @EOS Giga", "inherits": "Elegoo PETG @base", "from": "system", "setting_id": "7XyTDotf1zFmCPTV", @@ -25,6 +26,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PETG @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json index bf3942c6c9..63daca52b0 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PETG PRO @Elegoo Giga", + "renamed_from": "Elegoo PETG PRO @EOS Giga", "inherits": "Elegoo PETG PRO @base", "from": "system", "setting_id": "cO87yMETWbUTIweN", @@ -13,6 +14,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PETG PRO @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG Translucent @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG Translucent @Elegoo Giga.json index 89b17d0d8c..5ecda636ba 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG Translucent @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG Translucent @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PETG Translucent @Elegoo Giga", + "renamed_from": "Elegoo PETG Translucent @EOS Giga", "inherits": "Elegoo PETG Translucent @base", "from": "system", "setting_id": "fkE2LCMu63t1NQtI", @@ -25,6 +26,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PETG Translucent @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-CF @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-CF @Elegoo Giga.json index 633fee4d01..38129125b9 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-CF @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-CF @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PETG-CF @Elegoo Giga", + "renamed_from": "Elegoo PETG-CF @EOS Giga", "inherits": "Elegoo PETG-CF @base", "from": "system", "setting_id": "uGF6puqnX1jW2pmn", @@ -40,6 +41,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PETG-CF @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-GF @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-GF @Elegoo Giga.json index 085eba8e80..dce4172270 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-GF @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PETG-GF @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PETG-GF @Elegoo Giga", + "renamed_from": "Elegoo PETG-GF @EOS Giga", "inherits": "Elegoo PETG-GF @base", "from": "system", "setting_id": "S4ZpKZDyr5g5HMPi", @@ -40,6 +41,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PETG-GF @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json index 32d6f6a1eb..40a421724c 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA @Elegoo Giga", + "renamed_from": "Elegoo PLA @EOS Giga", "inherits": "Elegoo PLA @base", "from": "system", "setting_id": "DzHDGa5SJa8wdZkD", @@ -13,6 +14,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PLA @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Basic @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Basic @Elegoo Giga.json index 345eb9b131..0cc99c36ef 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Basic @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Basic @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Basic @Elegoo Giga", + "renamed_from": "Elegoo PLA Basic @EOS Giga", "inherits": "Elegoo PLA Basic @base", "from": "system", "setting_id": "vdtyGUjloveBjsGV", @@ -28,6 +29,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PLA Basic @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Galaxy @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Galaxy @Elegoo Giga.json index 4c6df1a2ac..41da71fe96 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Galaxy @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Galaxy @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Galaxy @Elegoo Giga", + "renamed_from": "Elegoo PLA Galaxy @EOS Giga", "inherits": "Elegoo PLA Galaxy @base", "from": "system", "setting_id": "Nq1YaFeJ6Osr7OZ9", @@ -31,6 +32,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PLA Galaxy @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Marble @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Marble @Elegoo Giga.json index a76087fb41..e4eaa97f9b 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Marble @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Marble @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Marble @Elegoo Giga", + "renamed_from": "Elegoo PLA Marble @EOS Giga", "inherits": "Elegoo PLA Marble @base", "from": "system", "setting_id": "6mfjc7t9ntuG1ZKW", @@ -31,6 +32,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PLA Marble @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json index ebc4a86a33..2699fa1860 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Matte @Elegoo Giga", + "renamed_from": "Elegoo PLA Matte @EOS Giga", "inherits": "Elegoo PLA Matte @base", "from": "system", "setting_id": "mHbvYB78eds96SH8", @@ -37,6 +38,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PLA Matte @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Sparkle @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Sparkle @Elegoo Giga.json index 68ad38e31a..e744828b49 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Sparkle @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Sparkle @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Sparkle @Elegoo Giga", + "renamed_from": "Elegoo PLA Sparkle @EOS Giga", "inherits": "Elegoo PLA Sparkle @base", "from": "system", "setting_id": "pgsOuYMxtcm3Fkar", @@ -31,6 +32,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PLA Sparkle @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Wood @Elegoo Giga.json b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Wood @Elegoo Giga.json index 2d3118d9f9..511b3a538a 100644 --- a/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Wood @Elegoo Giga.json +++ b/resources/profiles/Elegoo/filament/EOSGIGA/Elegoo PLA Wood @Elegoo Giga.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Wood @Elegoo Giga", + "renamed_from": "Elegoo PLA Wood @EOS Giga", "inherits": "Elegoo PLA Wood @base", "from": "system", "setting_id": "BI2euv7xwM9F2hKC", @@ -31,6 +32,5 @@ "Elegoo OrangeStorm Giga 0.6 nozzle", "Elegoo OrangeStorm Giga 0.8 nozzle", "Elegoo OrangeStorm Giga 1.0 nozzle" - ], - "renamed_from": "Elegoo PLA Wood @EOS Giga" + ] } diff --git a/resources/profiles/Elegoo/filament/Generic/Generic ABS @Elegoo.json b/resources/profiles/Elegoo/filament/Generic/Generic ABS @Elegoo.json index ff56f113f1..bf95116cca 100644 --- a/resources/profiles/Elegoo/filament/Generic/Generic ABS @Elegoo.json +++ b/resources/profiles/Elegoo/filament/Generic/Generic ABS @Elegoo.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "RWcQPhlCtjoh9xec", "name": "Generic ABS @Elegoo", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS @base", + "from": "system", + "setting_id": "RWcQPhlCtjoh9xec", + "instantiation": "true", "cool_plate_temp": [ "100" ], diff --git a/resources/profiles/Elegoo/filament/Generic/Generic ASA @Elegoo.json b/resources/profiles/Elegoo/filament/Generic/Generic ASA @Elegoo.json index eed4e746d9..ff7a1c9d00 100644 --- a/resources/profiles/Elegoo/filament/Generic/Generic ASA @Elegoo.json +++ b/resources/profiles/Elegoo/filament/Generic/Generic ASA @Elegoo.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "U5sKORLsVPcldRY9", "name": "Generic ASA @Elegoo", - "from": "system", - "instantiation": "true", "inherits": "Generic ASA @base", + "from": "system", + "setting_id": "U5sKORLsVPcldRY9", + "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Elegoo/filament/Generic/Generic PETG @Elegoo.json b/resources/profiles/Elegoo/filament/Generic/Generic PETG @Elegoo.json index 005d5b305c..d8e67cda60 100644 --- a/resources/profiles/Elegoo/filament/Generic/Generic PETG @Elegoo.json +++ b/resources/profiles/Elegoo/filament/Generic/Generic PETG @Elegoo.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "MJMg6nee4l28n2mK", "name": "Generic PETG @Elegoo", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @base", + "from": "system", + "setting_id": "MJMg6nee4l28n2mK", + "instantiation": "true", "cool_plate_temp": [ "60" ], diff --git a/resources/profiles/Elegoo/filament/Generic/Generic PETG PRO @Elegoo.json b/resources/profiles/Elegoo/filament/Generic/Generic PETG PRO @Elegoo.json index f122066617..6b5a610016 100644 --- a/resources/profiles/Elegoo/filament/Generic/Generic PETG PRO @Elegoo.json +++ b/resources/profiles/Elegoo/filament/Generic/Generic PETG PRO @Elegoo.json @@ -1,12 +1,12 @@ { "type": "filament", - "setting_id": "pKzSR8XeyyUDbrNW", "name": "Generic PETG PRO @Elegoo", "renamed_from": "Elegoo Generic PETG PRO", + "inherits": "Generic PETG @base", "from": "system", + "setting_id": "pKzSR8XeyyUDbrNW", "filament_id": "OFllmFhT", "instantiation": "true", - "inherits": "Generic PETG @base", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Elegoo/filament/Generic/Generic PLA @Elegoo.json b/resources/profiles/Elegoo/filament/Generic/Generic PLA @Elegoo.json index d70a73e10e..263ba5b3e4 100644 --- a/resources/profiles/Elegoo/filament/Generic/Generic PLA @Elegoo.json +++ b/resources/profiles/Elegoo/filament/Generic/Generic PLA @Elegoo.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "PaFKjG9jocZSHl76", "name": "Generic PLA @Elegoo", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA @base", + "from": "system", + "setting_id": "PaFKjG9jocZSHl76", + "instantiation": "true", "cool_plate_temp": [ "60" ], diff --git a/resources/profiles/Elegoo/filament/Generic/Generic PLA Matte @Elegoo.json b/resources/profiles/Elegoo/filament/Generic/Generic PLA Matte @Elegoo.json index 33561c23bc..3519ae8c4d 100644 --- a/resources/profiles/Elegoo/filament/Generic/Generic PLA Matte @Elegoo.json +++ b/resources/profiles/Elegoo/filament/Generic/Generic PLA Matte @Elegoo.json @@ -1,11 +1,11 @@ { "type": "filament", - "setting_id": "dH2Yf92iqsOj5XYo", "name": "Generic PLA Matte @Elegoo", + "inherits": "Generic PLA @base", "from": "system", + "setting_id": "dH2Yf92iqsOj5XYo", "filament_id": "OFmY0l6t", "instantiation": "true", - "inherits": "Generic PLA @base", "cool_plate_temp": [ "60" ], diff --git a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 0.4 nozzle.json index 09536322dd..2733de7433 100644 --- a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "zECkpVCtequEr3jC", "name": "Elegoo Neptune 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Elegoo Neptune 2 0.4 nozzle", + "from": "system", + "setting_id": "zECkpVCtequEr3jC", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune", "default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2 0.4 nozzle.json index 9f2c728356..aca22ef378 100644 --- a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "WButFYamVx0MBjUr", "name": "Elegoo Neptune 2 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_elegoo_common", + "from": "system", + "setting_id": "WButFYamVx0MBjUr", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 2", "default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2D 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2D 0.4 nozzle.json index ae78964a9a..8776a9d224 100644 --- a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2D 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2D 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "9KnJva7m7E5M1quB", "name": "Elegoo Neptune 2D 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Elegoo Neptune 2 0.4 nozzle", + "from": "system", + "setting_id": "9KnJva7m7E5M1quB", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 2D", "default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", @@ -29,58 +29,86 @@ "printable_height": "250", "auxiliary_fan": "0", "machine_max_acceleration_extruding": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_retracting": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_travel": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "70", + "70", "70", "70" ], "machine_max_speed_x": [ + "300", + "300", "300", "300" ], "machine_max_speed_y": [ + "300", + "300", "300", "300" ], "machine_max_speed_z": [ + "20", + "20", "20", "20" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "8", + "8", "8", "8" ], "machine_max_jerk_y": [ + "8", + "8", "8", "8" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], diff --git a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2S 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2S 0.4 nozzle.json index e6ee656aad..b8e276a9dd 100644 --- a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2S 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 2S 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "a8iTteroepkgXrLV", "name": "Elegoo Neptune 2S 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_elegoo_common", + "from": "system", + "setting_id": "a8iTteroepkgXrLV", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 2S", "default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 3 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 3 0.4 nozzle.json index 8766784dc6..af79ce92db 100644 --- a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 3 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune 3 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "rdKmVhTTrup3yqgA", "name": "Elegoo Neptune 3 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Elegoo Neptune 2 0.4 nozzle", + "from": "system", + "setting_id": "rdKmVhTTrup3yqgA", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 3", "default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune X 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune X 0.4 nozzle.json index 6596abf85a..19eaa4a699 100644 --- a/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune X 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN2SERIES/Elegoo Neptune X 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "krz8Xh3MatGnm8pm", "name": "Elegoo Neptune X 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_elegoo_common", + "from": "system", + "setting_id": "krz8Xh3MatGnm8pm", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune X", "default_print_profile": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Max 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Max 0.4 nozzle.json index 9aebe16dd2..5e4dc6fe1d 100644 --- a/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "8CM5vaCDh096ZzUs", "name": "Elegoo Neptune 3 Max 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Elegoo Neptune 3 Pro 0.4 nozzle", + "from": "system", + "setting_id": "8CM5vaCDh096ZzUs", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 3 Max", "default_print_profile": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Plus 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Plus 0.4 nozzle.json index c53f7a7d7a..51ad7c820b 100644 --- a/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "FylvH6NMzPbR9Bz6", "name": "Elegoo Neptune 3 Plus 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Elegoo Neptune 3 Pro 0.4 nozzle", + "from": "system", + "setting_id": "FylvH6NMzPbR9Bz6", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 3 Plus", "default_print_profile": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Pro 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Pro 0.4 nozzle.json index 82798b0285..b246cacab0 100644 --- a/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN3SERIES/Elegoo Neptune 3 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "9vUFjjVwWAggcbwk", "name": "Elegoo Neptune 3 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_elegoo_common", + "from": "system", + "setting_id": "9vUFjjVwWAggcbwk", + "instantiation": "true", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 3 Pro", "default_print_profile": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.2 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.2 nozzle.json index 32ec717163..2c01584e91 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.2 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 0.2 nozzle", + "renamed_from": "Elegoo Neptune 4 (0.2 nozzle)", "inherits": "Elegoo Neptune 4 0.4 nozzle", "from": "system", "setting_id": "YGH30n1CBw3of81j", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.06" - ], - "renamed_from": "Elegoo Neptune 4 (0.2 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.4 nozzle.json index fb3ca2d389..407344c774 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.4 nozzle.json @@ -1,10 +1,11 @@ { "type": "machine", "name": "Elegoo Neptune 4 0.4 nozzle", + "renamed_from": "Elegoo Neptune 4 (0.4 nozzle)", + "inherits": "fdm_elegoo_3dp_001_common", "from": "system", "setting_id": "69QdWuRQwAZk9rFu", "instantiation": "true", - "inherits": "fdm_elegoo_3dp_001_common", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 4", "default_print_profile": "0.20mm Standard @Elegoo N4 0.4 nozzle", @@ -114,6 +115,5 @@ "160x160/COLPIC/#30394F", "160x160/PNG" ], - "thumbnails_format": "COLPIC", - "renamed_from": "Elegoo Neptune 4 (0.4 nozzle)" + "thumbnails_format": "COLPIC" } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.6 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.6 nozzle.json index 6195ecf232..68763e7e16 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.6 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 0.6 nozzle", + "renamed_from": "Elegoo Neptune 4 (0.6 nozzle)", "inherits": "Elegoo Neptune 4 0.4 nozzle", "from": "system", "setting_id": "hAlEcYQJUiRdXvP3", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.12" - ], - "renamed_from": "Elegoo Neptune 4 (0.6 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.8 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.8 nozzle.json index 52483240b3..f3a97531dc 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.8 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 0.8 nozzle", + "renamed_from": "Elegoo Neptune 4 (0.8 nozzle)", "inherits": "Elegoo Neptune 4 0.4 nozzle", "from": "system", "setting_id": "2lAqJ4y4QPkkG3Eq", @@ -31,6 +32,5 @@ ], "retract_length_toolchange": [ "3" - ], - "renamed_from": "Elegoo Neptune 4 (0.8 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.2 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.2 nozzle.json index 5b863d5773..f3fbfacfda 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.2 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Max 0.2 nozzle", + "renamed_from": "Elegoo Neptune 4 Max (0.2 nozzle)", "inherits": "Elegoo Neptune 4 Max 0.4 nozzle", "from": "system", "setting_id": "cnSthrwdZaeijtbD", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.06" - ], - "renamed_from": "Elegoo Neptune 4 Max (0.2 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.4 nozzle.json index 08c9690cda..3779e74c0d 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.4 nozzle.json @@ -1,10 +1,11 @@ { "type": "machine", "name": "Elegoo Neptune 4 Max 0.4 nozzle", + "renamed_from": "Elegoo Neptune 4 Max (0.4 nozzle)", + "inherits": "Elegoo Neptune 4 0.4 nozzle", "from": "system", "setting_id": "Ie1QF4p1mjA7QqZf", "instantiation": "true", - "inherits": "Elegoo Neptune 4 0.4 nozzle", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 4 Max", "default_print_profile": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", @@ -80,6 +81,5 @@ "nozzle_volume": "110", "default_filament_profile": [ "Elegoo PLA @EN4 Series" - ], - "renamed_from": "Elegoo Neptune 4 Max (0.4 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.6 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.6 nozzle.json index 0b117150b1..04562e965a 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Max 0.6 nozzle", + "renamed_from": "Elegoo Neptune 4 Max (0.6 nozzle)", "inherits": "Elegoo Neptune 4 Max 0.4 nozzle", "from": "system", "setting_id": "DXxpsdZ4r73cfNT7", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.12" - ], - "renamed_from": "Elegoo Neptune 4 Max (0.6 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.8 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.8 nozzle.json index ca4c4dc092..9f9aea1263 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Max 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Max 0.8 nozzle", + "renamed_from": "Elegoo Neptune 4 Max (0.8 nozzle)", "inherits": "Elegoo Neptune 4 Max 0.4 nozzle", "from": "system", "setting_id": "licXMWyXGDavpuvu", @@ -31,6 +32,5 @@ ], "retract_length_toolchange": [ "3" - ], - "renamed_from": "Elegoo Neptune 4 Max (0.8 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.2 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.2 nozzle.json index e0c66e5166..1040c95656 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.2 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Plus 0.2 nozzle", + "renamed_from": "Elegoo Neptune 4 Plus (0.2 nozzle)", "inherits": "Elegoo Neptune 4 Plus 0.4 nozzle", "from": "system", "setting_id": "i5vcoYRF6cqkYBg9", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.06" - ], - "renamed_from": "Elegoo Neptune 4 Plus (0.2 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.4 nozzle.json index d6686b8bba..84f8568da2 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.4 nozzle.json @@ -1,10 +1,11 @@ { "type": "machine", "name": "Elegoo Neptune 4 Plus 0.4 nozzle", + "renamed_from": "Elegoo Neptune 4 Plus (0.4 nozzle)", + "inherits": "Elegoo Neptune 4 0.4 nozzle", "from": "system", "setting_id": "Rc54LjtIhvBWRS2Y", "instantiation": "true", - "inherits": "Elegoo Neptune 4 0.4 nozzle", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 4 Plus", "default_print_profile": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", @@ -80,6 +81,5 @@ "nozzle_volume": "110", "default_filament_profile": [ "Elegoo PLA @EN4 Series" - ], - "renamed_from": "Elegoo Neptune 4 Plus (0.4 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.6 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.6 nozzle.json index d038519e2e..1a1c90eaea 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Plus 0.6 nozzle", + "renamed_from": "Elegoo Neptune 4 Plus (0.6 nozzle)", "inherits": "Elegoo Neptune 4 Plus 0.4 nozzle", "from": "system", "setting_id": "nCRrAqumiiZpu5Re", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.12" - ], - "renamed_from": "Elegoo Neptune 4 Plus (0.6 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.8 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.8 nozzle.json index e4cbdaf790..21bceaceec 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Plus 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Plus 0.8 nozzle", + "renamed_from": "Elegoo Neptune 4 Plus (0.8 nozzle)", "inherits": "Elegoo Neptune 4 Plus 0.4 nozzle", "from": "system", "setting_id": "CM0ZVy6UJRObNbMV", @@ -31,6 +32,5 @@ ], "retract_length_toolchange": [ "3" - ], - "renamed_from": "Elegoo Neptune 4 Plus (0.8 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.2 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.2 nozzle.json index ff7bd8fdf9..bc9b797d10 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.2 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Pro 0.2 nozzle", + "renamed_from": "Elegoo Neptune 4 Pro (0.2 nozzle)", "inherits": "Elegoo Neptune 4 Pro 0.4 nozzle", "from": "system", "setting_id": "tjxZec78rbpYkEM2", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.06" - ], - "renamed_from": "Elegoo Neptune 4 Pro (0.2 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.4 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.4 nozzle.json index 97b3ad8fea..37b92b682e 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.4 nozzle.json @@ -1,10 +1,11 @@ { "type": "machine", "name": "Elegoo Neptune 4 Pro 0.4 nozzle", + "renamed_from": "Elegoo Neptune 4 Pro (0.4 nozzle)", + "inherits": "Elegoo Neptune 4 0.4 nozzle", "from": "system", "setting_id": "H1wMUu4EMaiQzxeD", "instantiation": "true", - "inherits": "Elegoo Neptune 4 0.4 nozzle", "host_type": "elegoolink", "printer_model": "Elegoo Neptune 4 Pro", "default_print_profile": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", @@ -35,6 +36,5 @@ "before_layer_change_gcode": ";[layer_z]\nG92 E0\n{if (first_layer_print_min[0]) > 57.5 && (first_layer_print_min[1]) > 57.5 &&(first_layer_print_max[0]) < 177.5 && (first_layer_print_max[1]) < 177.5 && layer_num < 4 && bed_temperature_initial_layer_single < 71}\nM141 S0\n{endif}", "default_filament_profile": [ "Elegoo PLA @EN4 Series" - ], - "renamed_from": "Elegoo Neptune 4 Pro (0.4 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.6 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.6 nozzle.json index 940da1c6a3..1572bcc985 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Pro 0.6 nozzle", + "renamed_from": "Elegoo Neptune 4 Pro (0.6 nozzle)", "inherits": "Elegoo Neptune 4 Pro 0.4 nozzle", "from": "system", "setting_id": "f9xvw4oHKtdZq7oq", @@ -28,6 +29,5 @@ ], "min_layer_height": [ "0.12" - ], - "renamed_from": "Elegoo Neptune 4 Pro (0.6 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.8 nozzle.json b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.8 nozzle.json index cdeebf75c3..ea04471ccc 100644 --- a/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/machine/EN4SERIES/Elegoo Neptune 4 Pro 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "machine", "name": "Elegoo Neptune 4 Pro 0.8 nozzle", + "renamed_from": "Elegoo Neptune 4 Pro (0.8 nozzle)", "inherits": "Elegoo Neptune 4 Pro 0.4 nozzle", "from": "system", "setting_id": "nd5TLZa3xnDu1s4W", @@ -31,6 +32,5 @@ ], "retract_length_toolchange": [ "3" - ], - "renamed_from": "Elegoo Neptune 4 Pro (0.8 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/process/EC/0.08mm Optimal @Elegoo C 0.2 nozzle.json b/resources/profiles/Elegoo/process/EC/0.08mm Optimal @Elegoo C 0.2 nozzle.json index 2312d6f0e6..4deed44f41 100644 --- a/resources/profiles/Elegoo/process/EC/0.08mm Optimal @Elegoo C 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.08mm Optimal @Elegoo C 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "elefant_foot_compensation": "0.05", - "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle", - "layer_height": "0.08", "name": "0.08mm Optimal @Elegoo C 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle", "from": "system", "setting_id": "YPAU0R4VfHdwXGMK", - "instantiation": "true" + "instantiation": "true", + "elefant_foot_compensation": "0.05", + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EC/0.12mm Draft @Elegoo C 0.2 nozzle.json b/resources/profiles/Elegoo/process/EC/0.12mm Draft @Elegoo C 0.2 nozzle.json index 8a775fd9d6..2c04217e64 100644 --- a/resources/profiles/Elegoo/process/EC/0.12mm Draft @Elegoo C 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.12mm Draft @Elegoo C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle", - "layer_height": "0.12", "name": "0.12mm Draft @Elegoo C 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle", "from": "system", "setting_id": "2syIUL3VOd1cnbjD", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EC/0.12mm Fine @Elegoo C 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC/0.12mm Fine @Elegoo C 0.4 nozzle.json index a94c0e7b2e..f922a8890d 100644 --- a/resources/profiles/Elegoo/process/EC/0.12mm Fine @Elegoo C 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.12mm Fine @Elegoo C 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", - "layer_height": "0.12", "name": "0.12mm Fine @Elegoo C 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", "from": "system", - "wall_loops": "3", "setting_id": "0S47zshoJbgOUinj", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12", + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EC/0.14mm Extra Draft @Elegoo C 0.2 nozzle.json b/resources/profiles/Elegoo/process/EC/0.14mm Extra Draft @Elegoo C 0.2 nozzle.json index d676fb31b1..5eb42ca072 100644 --- a/resources/profiles/Elegoo/process/EC/0.14mm Extra Draft @Elegoo C 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.14mm Extra Draft @Elegoo C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle", - "layer_height": "0.14", "name": "0.14mm Extra Draft @Elegoo C 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo C 0.2 nozzle", "from": "system", "setting_id": "6ibckorXgT6NdqHu", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.14" } diff --git a/resources/profiles/Elegoo/process/EC/0.16mm Extra Fine @Elegoo C 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC/0.16mm Extra Fine @Elegoo C 0.8 nozzle.json index 4cc9f531bb..aedfb88750 100644 --- a/resources/profiles/Elegoo/process/EC/0.16mm Extra Fine @Elegoo C 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.16mm Extra Fine @Elegoo C 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.16", "name": "0.16mm Extra Fine @Elegoo C 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", "from": "system", "setting_id": "93O7HpujQ35rwBWc", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EC/0.16mm Optimal @Elegoo C 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC/0.16mm Optimal @Elegoo C 0.4 nozzle.json index 4bce55dde7..cf7751dfb9 100644 --- a/resources/profiles/Elegoo/process/EC/0.16mm Optimal @Elegoo C 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.16mm Optimal @Elegoo C 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", - "layer_height": "0.16", "name": "0.16mm Optimal @Elegoo C 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", "from": "system", "setting_id": "KW2VknXy8J5A7ot5", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EC/0.18mm Fine @Elegoo C 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC/0.18mm Fine @Elegoo C 0.6 nozzle.json index 212ac989de..5d8f5a90b9 100644 --- a/resources/profiles/Elegoo/process/EC/0.18mm Fine @Elegoo C 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.18mm Fine @Elegoo C 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", - "layer_height": "0.18", "name": "0.18mm Fine @Elegoo C 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", "from": "system", "setting_id": "Z2Qn4avdLVCcBmcZ", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.18" } diff --git a/resources/profiles/Elegoo/process/EC/0.20mm Strength @Elegoo C 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC/0.20mm Strength @Elegoo C 0.4 nozzle.json index 33702fa81d..81cf56d8c0 100644 --- a/resources/profiles/Elegoo/process/EC/0.20mm Strength @Elegoo C 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.20mm Strength @Elegoo C 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", "name": "0.20mm Strength @Elegoo C 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", "from": "system", + "setting_id": "ICxi69TCESAQTBVb", + "instantiation": "true", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "bottom_shell_layers": "5", @@ -10,7 +12,5 @@ "print_flow_ratio": "0.95", "sparse_infill_density": "20%", "top_shell_layers": "6", - "wall_loops": "6", - "setting_id": "ICxi69TCESAQTBVb", - "instantiation": "true" + "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EC/0.24mm Draft @Elegoo C 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC/0.24mm Draft @Elegoo C 0.4 nozzle.json index fa0edcba37..395d036d1e 100644 --- a/resources/profiles/Elegoo/process/EC/0.24mm Draft @Elegoo C 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.24mm Draft @Elegoo C 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", - "layer_height": "0.24", "name": "0.24mm Draft @Elegoo C 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", "from": "system", "setting_id": "eoyZK9tkjdL1ATi9", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EC/0.24mm Fine @Elegoo C 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC/0.24mm Fine @Elegoo C 0.8 nozzle.json index 16dde5137e..f5b96e47ca 100644 --- a/resources/profiles/Elegoo/process/EC/0.24mm Fine @Elegoo C 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.24mm Fine @Elegoo C 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.24", "name": "0.24mm Fine @Elegoo C 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", "from": "system", "setting_id": "HyulASCV51SI9Dgo", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EC/0.24mm Optimal @Elegoo C 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC/0.24mm Optimal @Elegoo C 0.6 nozzle.json index 3e12c4cc8f..11af13cf25 100644 --- a/resources/profiles/Elegoo/process/EC/0.24mm Optimal @Elegoo C 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.24mm Optimal @Elegoo C 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", - "layer_height": "0.24", "name": "0.24mm Optimal @Elegoo C 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", "from": "system", "setting_id": "2H4qamD9XBTs46M7", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EC/0.28mm Extra Draft @Elegoo C 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC/0.28mm Extra Draft @Elegoo C 0.4 nozzle.json index a996b51d67..a9b43740a2 100644 --- a/resources/profiles/Elegoo/process/EC/0.28mm Extra Draft @Elegoo C 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.28mm Extra Draft @Elegoo C 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", - "layer_height": "0.28", "name": "0.28mm Extra Draft @Elegoo C 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C 0.4 nozzle", "from": "system", "setting_id": "R2evn20zXKqcB4Ro", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EC/0.30mm Strength @Elegoo C 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC/0.30mm Strength @Elegoo C 0.6 nozzle.json index d0d20b4fc7..8b082b398a 100644 --- a/resources/profiles/Elegoo/process/EC/0.30mm Strength @Elegoo C 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.30mm Strength @Elegoo C 0.6 nozzle.json @@ -1,15 +1,15 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", - "inner_wall_speed": "120", "name": "0.30mm Strength @Elegoo C 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", "from": "system", + "setting_id": "GtT1qn9vSWDdqBmm", + "instantiation": "true", + "inner_wall_speed": "120", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "outer_wall_speed": "80", "sparse_infill_density": "15%", "top_surface_speed": "120", - "wall_loops": "4", - "setting_id": "GtT1qn9vSWDdqBmm", - "instantiation": "true" + "wall_loops": "4" } diff --git a/resources/profiles/Elegoo/process/EC/0.32mm Optimal @Elegoo C 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC/0.32mm Optimal @Elegoo C 0.8 nozzle.json index c98b6810e2..7c7badf6de 100644 --- a/resources/profiles/Elegoo/process/EC/0.32mm Optimal @Elegoo C 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.32mm Optimal @Elegoo C 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", - "layer_height": "0.32", "name": "0.32mm Optimal @Elegoo C 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", "from": "system", "setting_id": "HDjwnNiVaWHvhyTX", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EC/0.36mm Draft @Elegoo C 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC/0.36mm Draft @Elegoo C 0.6 nozzle.json index 255e8ee255..24a73ec080 100644 --- a/resources/profiles/Elegoo/process/EC/0.36mm Draft @Elegoo C 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.36mm Draft @Elegoo C 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", - "layer_height": "0.36", "name": "0.36mm Draft @Elegoo C 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", "from": "system", "setting_id": "AviieBSwRir1KzZr", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EC/0.42mm Extra Draft @Elegoo C 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC/0.42mm Extra Draft @Elegoo C 0.6 nozzle.json index c146f09d58..24e74d5c84 100644 --- a/resources/profiles/Elegoo/process/EC/0.42mm Extra Draft @Elegoo C 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.42mm Extra Draft @Elegoo C 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", - "layer_height": "0.42", "name": "0.42mm Extra Draft @Elegoo C 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C 0.6 nozzle", "from": "system", "setting_id": "ex5zv2heDmy6ZcbP", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EC/0.48mm Draft @Elegoo C 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC/0.48mm Draft @Elegoo C 0.8 nozzle.json index 8aea27b6dd..ba4e097193 100644 --- a/resources/profiles/Elegoo/process/EC/0.48mm Draft @Elegoo C 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC/0.48mm Draft @Elegoo C 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", - "layer_height": "0.48", "name": "0.48mm Draft @Elegoo C 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C 0.8 nozzle", "from": "system", "setting_id": "ZFRRBIC9Z4OzSW7b", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EC2/0.08mm Optimal @Elegoo C2 0.2 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.08mm Optimal @Elegoo C2 0.2 nozzle.json index fb31e5b085..2695aa82b0 100644 --- a/resources/profiles/Elegoo/process/EC2/0.08mm Optimal @Elegoo C2 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.08mm Optimal @Elegoo C2 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "elefant_foot_compensation": "0.05", - "inherits": "0.10mm Standard @Elegoo C2 0.2 nozzle", - "layer_height": "0.08", "name": "0.08mm Optimal @Elegoo C2 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo C2 0.2 nozzle", + "from": "system", "setting_id": "w51mhOmSGgIFKlYV", - "instantiation": "true" + "instantiation": "true", + "elefant_foot_compensation": "0.05", + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EC2/0.12mm Draft @Elegoo C2 0.2 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.12mm Draft @Elegoo C2 0.2 nozzle.json index 2591f133fa..433b665c69 100644 --- a/resources/profiles/Elegoo/process/EC2/0.12mm Draft @Elegoo C2 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.12mm Draft @Elegoo C2 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.10mm Standard @Elegoo C2 0.2 nozzle", - "layer_height": "0.12", "name": "0.12mm Draft @Elegoo C2 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo C2 0.2 nozzle", + "from": "system", "setting_id": "MwbMs6dE4PKJjWEv", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EC2/0.12mm Fine @Elegoo C2 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.12mm Fine @Elegoo C2 0.4 nozzle.json index 1e38bdedef..03e6cda866 100644 --- a/resources/profiles/Elegoo/process/EC2/0.12mm Fine @Elegoo C2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.12mm Fine @Elegoo C2 0.4 nozzle.json @@ -1,13 +1,13 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", - "layer_height": "0.12", "name": "0.12mm Fine @Elegoo C2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", + "from": "system", + "setting_id": "NbPHZPuFyAdAwYxw", + "instantiation": "true", + "layer_height": "0.12", "wall_loops": "3", "support_bottom_z_distance": "0.2", "support_top_z_distance": "0.2", - "top_solid_infill_flow_ratio": "1.09", - "setting_id": "NbPHZPuFyAdAwYxw", - "instantiation": "true" + "top_solid_infill_flow_ratio": "1.09" } diff --git a/resources/profiles/Elegoo/process/EC2/0.14mm Extra Draft @Elegoo C2 0.2 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.14mm Extra Draft @Elegoo C2 0.2 nozzle.json index 578cc189a1..41468b71bb 100644 --- a/resources/profiles/Elegoo/process/EC2/0.14mm Extra Draft @Elegoo C2 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.14mm Extra Draft @Elegoo C2 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.10mm Standard @Elegoo C2 0.2 nozzle", - "layer_height": "0.14", "name": "0.14mm Extra Draft @Elegoo C2 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo C2 0.2 nozzle", + "from": "system", "setting_id": "WZYQH8ejJLFr3JKT", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.14" } diff --git a/resources/profiles/Elegoo/process/EC2/0.16mm Extra Fine @Elegoo C2 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.16mm Extra Fine @Elegoo C2 0.8 nozzle.json index ee21a677ad..aaeae89b95 100644 --- a/resources/profiles/Elegoo/process/EC2/0.16mm Extra Fine @Elegoo C2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.16mm Extra Fine @Elegoo C2 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.16", "name": "0.16mm Extra Fine @Elegoo C2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", + "from": "system", "setting_id": "8PjDabUQtqZkOYxb", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EC2/0.16mm Optimal @Elegoo C2 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.16mm Optimal @Elegoo C2 0.4 nozzle.json index cbf804ad9c..568d7ed0c2 100644 --- a/resources/profiles/Elegoo/process/EC2/0.16mm Optimal @Elegoo C2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.16mm Optimal @Elegoo C2 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", - "layer_height": "0.16", "name": "0.16mm Optimal @Elegoo C2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", + "from": "system", "setting_id": "cyxRTNBvYul3eWPq", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EC2/0.18mm Fine @Elegoo C2 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.18mm Fine @Elegoo C2 0.6 nozzle.json index 607c77fc1a..f27edc3b97 100644 --- a/resources/profiles/Elegoo/process/EC2/0.18mm Fine @Elegoo C2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.18mm Fine @Elegoo C2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", - "layer_height": "0.18", "name": "0.18mm Fine @Elegoo C2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", + "from": "system", "setting_id": "CpTAuCMAczdOUFQv", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.18" } diff --git a/resources/profiles/Elegoo/process/EC2/0.20mm Strength @Elegoo C2 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.20mm Strength @Elegoo C2 0.4 nozzle.json index 8a87b379c7..3f5375d255 100644 --- a/resources/profiles/Elegoo/process/EC2/0.20mm Strength @Elegoo C2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.20mm Strength @Elegoo C2 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", "name": "0.20mm Strength @Elegoo C2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", + "from": "system", + "setting_id": "qE1gwHDiHsBUar05", + "instantiation": "true", "wall_sequence": "inner wall/outer wall", "reduce_crossing_wall": "0", "bottom_shell_layers": "5", @@ -11,7 +13,5 @@ "sparse_infill_density": "20%", "top_shell_layers": "6", "wall_loops": "5", - "top_solid_infill_flow_ratio": "1.09", - "setting_id": "qE1gwHDiHsBUar05", - "instantiation": "true" + "top_solid_infill_flow_ratio": "1.09" } diff --git a/resources/profiles/Elegoo/process/EC2/0.24mm Draft @Elegoo C2 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.24mm Draft @Elegoo C2 0.4 nozzle.json index 3477713edc..046e6bf7b4 100644 --- a/resources/profiles/Elegoo/process/EC2/0.24mm Draft @Elegoo C2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.24mm Draft @Elegoo C2 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", - "layer_height": "0.24", "name": "0.24mm Draft @Elegoo C2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", + "from": "system", "setting_id": "m8IwC70UUDsvEgDx", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EC2/0.24mm Fine @Elegoo C2 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.24mm Fine @Elegoo C2 0.8 nozzle.json index 8a3d3f1baa..af303b49d3 100644 --- a/resources/profiles/Elegoo/process/EC2/0.24mm Fine @Elegoo C2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.24mm Fine @Elegoo C2 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.24", "name": "0.24mm Fine @Elegoo C2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", + "from": "system", "setting_id": "aGRzp98JewtyCnJ5", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EC2/0.24mm Optimal @Elegoo C2 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.24mm Optimal @Elegoo C2 0.6 nozzle.json index f8a86f303d..844f875909 100644 --- a/resources/profiles/Elegoo/process/EC2/0.24mm Optimal @Elegoo C2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.24mm Optimal @Elegoo C2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", - "layer_height": "0.24", "name": "0.24mm Optimal @Elegoo C2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", + "from": "system", "setting_id": "mg6YKeDhdAmVUnCp", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EC2/0.28mm Extra Draft @Elegoo C2 0.4 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.28mm Extra Draft @Elegoo C2 0.4 nozzle.json index d763b38514..325b617538 100644 --- a/resources/profiles/Elegoo/process/EC2/0.28mm Extra Draft @Elegoo C2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.28mm Extra Draft @Elegoo C2 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", - "layer_height": "0.28", "name": "0.28mm Extra Draft @Elegoo C2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo C2 0.4 nozzle", + "from": "system", "setting_id": "zLhSKg0WGU0C5hfV", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EC2/0.30mm Strength @Elegoo C2 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.30mm Strength @Elegoo C2 0.6 nozzle.json index 52ff71723c..d62a28c431 100644 --- a/resources/profiles/Elegoo/process/EC2/0.30mm Strength @Elegoo C2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.30mm Strength @Elegoo C2 0.6 nozzle.json @@ -1,15 +1,15 @@ { "type": "process", - "from": "system", - "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", - "inner_wall_speed": "120", "name": "0.30mm Strength @Elegoo C2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", + "from": "system", + "setting_id": "6Pdk7vUo7sxZ1H3r", + "instantiation": "true", + "inner_wall_speed": "120", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "outer_wall_speed": "80", "sparse_infill_density": "15%", "top_surface_speed": "120", - "wall_loops": "4", - "setting_id": "6Pdk7vUo7sxZ1H3r", - "instantiation": "true" + "wall_loops": "4" } diff --git a/resources/profiles/Elegoo/process/EC2/0.32mm Optimal @Elegoo C2 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.32mm Optimal @Elegoo C2 0.8 nozzle.json index 46caf9ca4c..f4f0a3152c 100644 --- a/resources/profiles/Elegoo/process/EC2/0.32mm Optimal @Elegoo C2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.32mm Optimal @Elegoo C2 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", - "layer_height": "0.32", "name": "0.32mm Optimal @Elegoo C2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", + "from": "system", "setting_id": "CctfduTuGLmoXTaG", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EC2/0.36mm Draft @Elegoo C2 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.36mm Draft @Elegoo C2 0.6 nozzle.json index a484461350..e5889acabd 100644 --- a/resources/profiles/Elegoo/process/EC2/0.36mm Draft @Elegoo C2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.36mm Draft @Elegoo C2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", - "layer_height": "0.36", "name": "0.36mm Draft @Elegoo C2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", + "from": "system", "setting_id": "MEasFZeORQm7BzsT", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EC2/0.42mm Extra Draft @Elegoo C2 0.6 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.42mm Extra Draft @Elegoo C2 0.6 nozzle.json index 7ab59fecd2..4499644811 100644 --- a/resources/profiles/Elegoo/process/EC2/0.42mm Extra Draft @Elegoo C2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.42mm Extra Draft @Elegoo C2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", - "layer_height": "0.42", "name": "0.42mm Extra Draft @Elegoo C2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo C2 0.6 nozzle", + "from": "system", "setting_id": "TbMqvWBwE7Hf6VdK", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EC2/0.48mm Draft @Elegoo C2 0.8 nozzle.json b/resources/profiles/Elegoo/process/EC2/0.48mm Draft @Elegoo C2 0.8 nozzle.json index 17e2904446..08a962901f 100644 --- a/resources/profiles/Elegoo/process/EC2/0.48mm Draft @Elegoo C2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EC2/0.48mm Draft @Elegoo C2 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", - "layer_height": "0.48", "name": "0.48mm Draft @Elegoo C2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo C2 0.8 nozzle", + "from": "system", "setting_id": "8BBCLnwOPdqLlIIo", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/ECC/0.08mm Optimal @Elegoo CC 0.2 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.08mm Optimal @Elegoo CC 0.2 nozzle.json index 5673d99376..ee5b5e815f 100644 --- a/resources/profiles/Elegoo/process/ECC/0.08mm Optimal @Elegoo CC 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.08mm Optimal @Elegoo CC 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "elefant_foot_compensation": "0.05", - "inherits": "0.10mm Standard @Elegoo CC 0.2 nozzle", - "layer_height": "0.08", "name": "0.08mm Optimal @Elegoo CC 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo CC 0.2 nozzle", "from": "system", "setting_id": "99XQJJWd9FHtXPEa", - "instantiation": "true" + "instantiation": "true", + "elefant_foot_compensation": "0.05", + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/ECC/0.12mm Draft @Elegoo CC 0.2 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.12mm Draft @Elegoo CC 0.2 nozzle.json index 4a21f48f65..7de0bb2c42 100644 --- a/resources/profiles/Elegoo/process/ECC/0.12mm Draft @Elegoo CC 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.12mm Draft @Elegoo CC 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.10mm Standard @Elegoo CC 0.2 nozzle", - "layer_height": "0.12", "name": "0.12mm Draft @Elegoo CC 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo CC 0.2 nozzle", "from": "system", "setting_id": "LwyvYtJYTwvDlW5Z", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/ECC/0.12mm Fine @Elegoo CC 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.12mm Fine @Elegoo CC 0.4 nozzle.json index 66ca86dafa..037787bfc2 100644 --- a/resources/profiles/Elegoo/process/ECC/0.12mm Fine @Elegoo CC 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.12mm Fine @Elegoo CC 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", - "layer_height": "0.12", "name": "0.12mm Fine @Elegoo CC 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", "from": "system", - "wall_loops": "3", "setting_id": "340MqJEmv7j7xiOz", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12", + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/ECC/0.14mm Extra Draft @Elegoo CC 0.2 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.14mm Extra Draft @Elegoo CC 0.2 nozzle.json index f30ff023ab..05680ce052 100644 --- a/resources/profiles/Elegoo/process/ECC/0.14mm Extra Draft @Elegoo CC 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.14mm Extra Draft @Elegoo CC 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.10mm Standard @Elegoo CC 0.2 nozzle", - "layer_height": "0.14", "name": "0.14mm Extra Draft @Elegoo CC 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo CC 0.2 nozzle", "from": "system", "setting_id": "Z5WZBJIWjzOpucn2", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.14" } diff --git a/resources/profiles/Elegoo/process/ECC/0.16mm Extra Fine @Elegoo CC 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.16mm Extra Fine @Elegoo CC 0.8 nozzle.json index 6ea50dcd4d..f879a64262 100644 --- a/resources/profiles/Elegoo/process/ECC/0.16mm Extra Fine @Elegoo CC 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.16mm Extra Fine @Elegoo CC 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.16", "name": "0.16mm Extra Fine @Elegoo CC 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", "from": "system", "setting_id": "1pAr6ZTtBBXzHoUw", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/ECC/0.16mm Optimal @Elegoo CC 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.16mm Optimal @Elegoo CC 0.4 nozzle.json index 20391d67eb..cc24a259f6 100644 --- a/resources/profiles/Elegoo/process/ECC/0.16mm Optimal @Elegoo CC 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.16mm Optimal @Elegoo CC 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", - "layer_height": "0.16", "name": "0.16mm Optimal @Elegoo CC 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", "from": "system", "setting_id": "drsSvJoMY02R1hyF", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/ECC/0.18mm Fine @Elegoo CC 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.18mm Fine @Elegoo CC 0.6 nozzle.json index 547b84689f..bb34313938 100644 --- a/resources/profiles/Elegoo/process/ECC/0.18mm Fine @Elegoo CC 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.18mm Fine @Elegoo CC 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", - "layer_height": "0.18", "name": "0.18mm Fine @Elegoo CC 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", "from": "system", "setting_id": "bmv0UtvbzVHeOF4Q", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.18" } diff --git a/resources/profiles/Elegoo/process/ECC/0.20mm Strength @Elegoo CC 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.20mm Strength @Elegoo CC 0.4 nozzle.json index c91e5af39d..d34f85b66f 100644 --- a/resources/profiles/Elegoo/process/ECC/0.20mm Strength @Elegoo CC 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.20mm Strength @Elegoo CC 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", "name": "0.20mm Strength @Elegoo CC 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", "from": "system", + "setting_id": "1OQrGLkl8fwRTEDT", + "instantiation": "true", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "bottom_shell_layers": "5", @@ -10,7 +12,5 @@ "print_flow_ratio": "0.95", "sparse_infill_density": "20%", "top_shell_layers": "6", - "wall_loops": "6", - "setting_id": "1OQrGLkl8fwRTEDT", - "instantiation": "true" + "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/ECC/0.24mm Draft @Elegoo CC 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.24mm Draft @Elegoo CC 0.4 nozzle.json index e59c6de6b4..da3b132b6a 100644 --- a/resources/profiles/Elegoo/process/ECC/0.24mm Draft @Elegoo CC 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.24mm Draft @Elegoo CC 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", - "layer_height": "0.24", "name": "0.24mm Draft @Elegoo CC 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", "from": "system", "setting_id": "PMeZoCKetIP9VQZM", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/ECC/0.24mm Fine @Elegoo CC 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.24mm Fine @Elegoo CC 0.8 nozzle.json index bacdbd0ca9..82dd9cbca4 100644 --- a/resources/profiles/Elegoo/process/ECC/0.24mm Fine @Elegoo CC 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.24mm Fine @Elegoo CC 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.24", "name": "0.24mm Fine @Elegoo CC 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", "from": "system", "setting_id": "6sqS6WmJX9aYJymC", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/ECC/0.24mm Optimal @Elegoo CC 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.24mm Optimal @Elegoo CC 0.6 nozzle.json index 7e25c9177f..a92338f4de 100644 --- a/resources/profiles/Elegoo/process/ECC/0.24mm Optimal @Elegoo CC 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.24mm Optimal @Elegoo CC 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", - "layer_height": "0.24", "name": "0.24mm Optimal @Elegoo CC 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", "from": "system", "setting_id": "hIJP5FSSmLy6bMcK", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/ECC/0.28mm Extra Draft @Elegoo CC 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.28mm Extra Draft @Elegoo CC 0.4 nozzle.json index 1b03db5ce9..80f65df58d 100644 --- a/resources/profiles/Elegoo/process/ECC/0.28mm Extra Draft @Elegoo CC 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.28mm Extra Draft @Elegoo CC 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", - "layer_height": "0.28", "name": "0.28mm Extra Draft @Elegoo CC 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC 0.4 nozzle", "from": "system", "setting_id": "6A6cE25ThuCqP7wi", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/ECC/0.30mm Strength @Elegoo CC 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.30mm Strength @Elegoo CC 0.6 nozzle.json index 33d040c984..f14883ffe6 100644 --- a/resources/profiles/Elegoo/process/ECC/0.30mm Strength @Elegoo CC 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.30mm Strength @Elegoo CC 0.6 nozzle.json @@ -1,15 +1,15 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", - "inner_wall_speed": "120", "name": "0.30mm Strength @Elegoo CC 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", "from": "system", + "setting_id": "b3rbevf3CUh8I05M", + "instantiation": "true", + "inner_wall_speed": "120", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "outer_wall_speed": "80", "sparse_infill_density": "15%", "top_surface_speed": "120", - "wall_loops": "4", - "setting_id": "b3rbevf3CUh8I05M", - "instantiation": "true" + "wall_loops": "4" } diff --git a/resources/profiles/Elegoo/process/ECC/0.32mm Optimal @Elegoo CC 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.32mm Optimal @Elegoo CC 0.8 nozzle.json index 654a49c1c5..8725296220 100644 --- a/resources/profiles/Elegoo/process/ECC/0.32mm Optimal @Elegoo CC 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.32mm Optimal @Elegoo CC 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", - "layer_height": "0.32", "name": "0.32mm Optimal @Elegoo CC 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", "from": "system", "setting_id": "Kez7FhiJRPdChlgg", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/ECC/0.36mm Draft @Elegoo CC 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.36mm Draft @Elegoo CC 0.6 nozzle.json index eaed462a3e..197ebfc0a3 100644 --- a/resources/profiles/Elegoo/process/ECC/0.36mm Draft @Elegoo CC 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.36mm Draft @Elegoo CC 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", - "layer_height": "0.36", "name": "0.36mm Draft @Elegoo CC 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", "from": "system", "setting_id": "pigdfIs4DLj6QswL", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/ECC/0.42mm Extra Draft @Elegoo CC 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.42mm Extra Draft @Elegoo CC 0.6 nozzle.json index c1fd90decf..1f6bb2fbb7 100644 --- a/resources/profiles/Elegoo/process/ECC/0.42mm Extra Draft @Elegoo CC 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.42mm Extra Draft @Elegoo CC 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", - "layer_height": "0.42", "name": "0.42mm Extra Draft @Elegoo CC 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC 0.6 nozzle", "from": "system", "setting_id": "griDT2q7IdUWT7hr", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/ECC/0.48mm Draft @Elegoo CC 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC/0.48mm Draft @Elegoo CC 0.8 nozzle.json index 775f515837..3b571e8079 100644 --- a/resources/profiles/Elegoo/process/ECC/0.48mm Draft @Elegoo CC 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC/0.48mm Draft @Elegoo CC 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", - "layer_height": "0.48", "name": "0.48mm Draft @Elegoo CC 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC 0.8 nozzle", "from": "system", "setting_id": "tpCT2ow532mcwKcd", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.08mm Optimal @Elegoo CC2 0.2 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.08mm Optimal @Elegoo CC2 0.2 nozzle.json index 82dc23f427..8b4947373f 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.08mm Optimal @Elegoo CC2 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.08mm Optimal @Elegoo CC2 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "elefant_foot_compensation": "0.05", - "inherits": "0.10mm Standard @Elegoo CC2 0.2 nozzle", - "layer_height": "0.08", "name": "0.08mm Optimal @Elegoo CC2 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo CC2 0.2 nozzle", "from": "system", "setting_id": "uD5gceL1thOzkzGo", - "instantiation": "true" + "instantiation": "true", + "elefant_foot_compensation": "0.05", + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.12mm Draft @Elegoo CC2 0.2 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.12mm Draft @Elegoo CC2 0.2 nozzle.json index e570db58fc..19784aedec 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.12mm Draft @Elegoo CC2 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.12mm Draft @Elegoo CC2 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.10mm Standard @Elegoo CC2 0.2 nozzle", - "layer_height": "0.12", "name": "0.12mm Draft @Elegoo CC2 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo CC2 0.2 nozzle", "from": "system", "setting_id": "cGFwf6ddNwMmqs9h", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.12mm Fine @Elegoo CC2 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.12mm Fine @Elegoo CC2 0.4 nozzle.json index 85705f0aa9..e5a793903d 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.12mm Fine @Elegoo CC2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.12mm Fine @Elegoo CC2 0.4 nozzle.json @@ -1,13 +1,13 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", - "layer_height": "0.12", "name": "0.12mm Fine @Elegoo CC2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", "from": "system", + "setting_id": "lRhdk46FwTwzcCYh", + "instantiation": "true", + "layer_height": "0.12", "wall_loops": "3", "support_bottom_z_distance": "0.2", "support_top_z_distance": "0.2", - "top_solid_infill_flow_ratio": "1.09", - "setting_id": "lRhdk46FwTwzcCYh", - "instantiation": "true" + "top_solid_infill_flow_ratio": "1.09" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.14mm Extra Draft @Elegoo CC2 0.2 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.14mm Extra Draft @Elegoo CC2 0.2 nozzle.json index 69934b5680..1ec3f6f14d 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.14mm Extra Draft @Elegoo CC2 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.14mm Extra Draft @Elegoo CC2 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.10mm Standard @Elegoo CC2 0.2 nozzle", - "layer_height": "0.14", "name": "0.14mm Extra Draft @Elegoo CC2 0.2 nozzle", + "inherits": "0.10mm Standard @Elegoo CC2 0.2 nozzle", "from": "system", "setting_id": "falXCyvjKInAQBuU", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.14" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.16mm Extra Fine @Elegoo CC2 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.16mm Extra Fine @Elegoo CC2 0.8 nozzle.json index e5de49c2fc..65bf021f37 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.16mm Extra Fine @Elegoo CC2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.16mm Extra Fine @Elegoo CC2 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.16", "name": "0.16mm Extra Fine @Elegoo CC2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", "from": "system", "setting_id": "fkdUtfBU1HkWIIvT", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.16mm Optimal @Elegoo CC2 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.16mm Optimal @Elegoo CC2 0.4 nozzle.json index 82cebc5760..9fb8d633c4 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.16mm Optimal @Elegoo CC2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.16mm Optimal @Elegoo CC2 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", - "layer_height": "0.16", "name": "0.16mm Optimal @Elegoo CC2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", "from": "system", "setting_id": "et3r9GAefxCq9TSq", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.18mm Fine @Elegoo CC2 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.18mm Fine @Elegoo CC2 0.6 nozzle.json index a8c83adc07..739c4695b1 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.18mm Fine @Elegoo CC2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.18mm Fine @Elegoo CC2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", - "layer_height": "0.18", "name": "0.18mm Fine @Elegoo CC2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", "from": "system", "setting_id": "zpijb8su3jIgrND9", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.18" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.20mm Strength @Elegoo CC2 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.20mm Strength @Elegoo CC2 0.4 nozzle.json index d3374f99e0..92db8b43a7 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.20mm Strength @Elegoo CC2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.20mm Strength @Elegoo CC2 0.4 nozzle.json @@ -1,8 +1,10 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", "name": "0.20mm Strength @Elegoo CC2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", "from": "system", + "setting_id": "jTiebnbHJERoOZ2Y", + "instantiation": "true", "wall_sequence": "inner wall/outer wall", "reduce_crossing_wall": "0", "bottom_shell_layers": "5", @@ -11,7 +13,5 @@ "sparse_infill_density": "20%", "top_shell_layers": "6", "wall_loops": "5", - "top_solid_infill_flow_ratio": "1.09", - "setting_id": "jTiebnbHJERoOZ2Y", - "instantiation": "true" + "top_solid_infill_flow_ratio": "1.09" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.24mm Draft @Elegoo CC2 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.24mm Draft @Elegoo CC2 0.4 nozzle.json index cb28d46e8d..fd84b8c167 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.24mm Draft @Elegoo CC2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.24mm Draft @Elegoo CC2 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", - "layer_height": "0.24", "name": "0.24mm Draft @Elegoo CC2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", "from": "system", "setting_id": "dw8ZgRee5mUlNdon", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.24mm Fine @Elegoo CC2 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.24mm Fine @Elegoo CC2 0.8 nozzle.json index 1df6cf54a0..111f740966 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.24mm Fine @Elegoo CC2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.24mm Fine @Elegoo CC2 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", - "initial_layer_print_height": "0.3", - "layer_height": "0.24", "name": "0.24mm Fine @Elegoo CC2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", "from": "system", "setting_id": "TrKMkazV6my94O8Q", - "instantiation": "true" + "instantiation": "true", + "initial_layer_print_height": "0.3", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.24mm Optimal @Elegoo CC2 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.24mm Optimal @Elegoo CC2 0.6 nozzle.json index e559bf36ca..b9d53c20bc 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.24mm Optimal @Elegoo CC2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.24mm Optimal @Elegoo CC2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", - "layer_height": "0.24", "name": "0.24mm Optimal @Elegoo CC2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", "from": "system", "setting_id": "VfcmVzpWGuafr5C8", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.28mm Extra Draft @Elegoo CC2 0.4 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.28mm Extra Draft @Elegoo CC2 0.4 nozzle.json index f7259db276..335d024ec0 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.28mm Extra Draft @Elegoo CC2 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.28mm Extra Draft @Elegoo CC2 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", - "layer_height": "0.28", "name": "0.28mm Extra Draft @Elegoo CC2 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo CC2 0.4 nozzle", "from": "system", "setting_id": "iOd2EdXRnWMT6VZM", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.30mm Strength @Elegoo CC2 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.30mm Strength @Elegoo CC2 0.6 nozzle.json index 7b67d63e18..798c769cd2 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.30mm Strength @Elegoo CC2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.30mm Strength @Elegoo CC2 0.6 nozzle.json @@ -1,15 +1,15 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", - "inner_wall_speed": "120", "name": "0.30mm Strength @Elegoo CC2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", "from": "system", + "setting_id": "qvgkuo9AInajHCez", + "instantiation": "true", + "inner_wall_speed": "120", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "outer_wall_speed": "80", "sparse_infill_density": "15%", "top_surface_speed": "120", - "wall_loops": "4", - "setting_id": "qvgkuo9AInajHCez", - "instantiation": "true" + "wall_loops": "4" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.32mm Optimal @Elegoo CC2 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.32mm Optimal @Elegoo CC2 0.8 nozzle.json index e84edc7edf..1caa6083a2 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.32mm Optimal @Elegoo CC2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.32mm Optimal @Elegoo CC2 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", - "layer_height": "0.32", "name": "0.32mm Optimal @Elegoo CC2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", "from": "system", "setting_id": "3l5lU1sBxbMAzV6x", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.36mm Draft @Elegoo CC2 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.36mm Draft @Elegoo CC2 0.6 nozzle.json index 41479b76b1..e892c976fd 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.36mm Draft @Elegoo CC2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.36mm Draft @Elegoo CC2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", - "layer_height": "0.36", "name": "0.36mm Draft @Elegoo CC2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", "from": "system", "setting_id": "S1MtBrEo884gfhm3", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.42mm Extra Draft @Elegoo CC2 0.6 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.42mm Extra Draft @Elegoo CC2 0.6 nozzle.json index debbe6ef13..10f98d7d2e 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.42mm Extra Draft @Elegoo CC2 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.42mm Extra Draft @Elegoo CC2 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", - "layer_height": "0.42", "name": "0.42mm Extra Draft @Elegoo CC2 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo CC2 0.6 nozzle", "from": "system", "setting_id": "Du73E9Zw3cOyKZYb", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/ECC2/0.48mm Draft @Elegoo CC2 0.8 nozzle.json b/resources/profiles/Elegoo/process/ECC2/0.48mm Draft @Elegoo CC2 0.8 nozzle.json index 08006c453f..b7786ea559 100644 --- a/resources/profiles/Elegoo/process/ECC2/0.48mm Draft @Elegoo CC2 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/ECC2/0.48mm Draft @Elegoo CC2 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", - "layer_height": "0.48", "name": "0.48mm Draft @Elegoo CC2 0.8 nozzle", + "inherits": "0.40mm Standard @Elegoo CC2 0.8 nozzle", "from": "system", "setting_id": "K7hJQ2Kzyu7kgmCx", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.12mm Fine @Elegoo Neptune 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.12mm Fine @Elegoo Neptune 0.4 nozzle.json index cd7a6f60ae..b7a1867e5a 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.12mm Fine @Elegoo Neptune 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.12mm Fine @Elegoo Neptune 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "x7ZbjKUNtGbCsJWr", - "from": "system", - "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", "name": "0.12mm Fine @Elegoo Neptune 0.4 nozzle", - "layer_height": "0.12", - "wall_loops": "3", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune;0.08mm Extra Fine @Elegoo Neptune2;0.08mm Extra Fine @Elegoo Neptune2D;0.08mm Extra Fine @Elegoo Neptune2S;0.08mm Extra Fine @Elegoo NeptuneX;0.12mm Fine @Elegoo Neptune;0.12mm Fine @Elegoo Neptune2;0.12mm Fine @Elegoo Neptune2D;0.12mm Fine @Elegoo Neptune2S;0.12mm Fine @Elegoo NeptuneX", + "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", + "from": "system", + "setting_id": "x7ZbjKUNtGbCsJWr", "instantiation": "true", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune;0.08mm Extra Fine @Elegoo Neptune2;0.08mm Extra Fine @Elegoo Neptune2D;0.08mm Extra Fine @Elegoo Neptune2S;0.08mm Extra Fine @Elegoo NeptuneX;0.12mm Fine @Elegoo Neptune;0.12mm Fine @Elegoo Neptune2;0.12mm Fine @Elegoo Neptune2D;0.12mm Fine @Elegoo Neptune2S;0.12mm Fine @Elegoo NeptuneX" + "layer_height": "0.12", + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.16mm Optimal @Elegoo Neptune 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.16mm Optimal @Elegoo Neptune 0.4 nozzle.json index c616506306..79e11c97f4 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.16mm Optimal @Elegoo Neptune 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.16mm Optimal @Elegoo Neptune 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "dmdjW1ZxuWAXgArQ", - "from": "system", - "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", "name": "0.16mm Optimal @Elegoo Neptune 0.4 nozzle", - "layer_height": "0.16", + "renamed_from": "0.16mm Optimal @Elegoo Neptune;0.16mm Optimal @Elegoo Neptune2;0.16mm Optimal @Elegoo Neptune2D;0.16mm Optimal @Elegoo Neptune2S;0.16mm Optimal @Elegoo NeptuneX", + "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", + "from": "system", + "setting_id": "dmdjW1ZxuWAXgArQ", "instantiation": "true", - "renamed_from": "0.16mm Optimal @Elegoo Neptune;0.16mm Optimal @Elegoo Neptune2;0.16mm Optimal @Elegoo Neptune2D;0.16mm Optimal @Elegoo Neptune2S;0.16mm Optimal @Elegoo NeptuneX" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Standard @Elegoo Neptune 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Standard @Elegoo Neptune 0.4 nozzle.json index fce4e6ea2a..b1d56aef44 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Standard @Elegoo Neptune 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Standard @Elegoo Neptune 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "ivuelLxit3DxpCQf", "name": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune;0.20mm Standard @Elegoo Neptune2;0.20mm Standard @Elegoo Neptune2D;0.20mm Standard @Elegoo Neptune2S;0.20mm Standard @Elegoo NeptuneX", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "ivuelLxit3DxpCQf", "instantiation": "true", "filename_format": "{nozzle_diameter[0]}{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "default_acceleration": "1000", @@ -34,6 +35,5 @@ "Elegoo Neptune 2S 0.4 nozzle", "Elegoo Neptune 2D 0.4 nozzle", "Elegoo Neptune 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune;0.20mm Standard @Elegoo Neptune2;0.20mm Standard @Elegoo Neptune2D;0.20mm Standard @Elegoo Neptune2S;0.20mm Standard @Elegoo NeptuneX" + ] } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Strength @Elegoo Neptune 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Strength @Elegoo Neptune 0.4 nozzle.json index e7c2cc6460..56ea858aa7 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Strength @Elegoo Neptune 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.20mm Strength @Elegoo Neptune 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "7o8beRTTV9kahf6c", - "from": "system", - "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", "name": "0.20mm Strength @Elegoo Neptune 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", + "from": "system", + "setting_id": "7o8beRTTV9kahf6c", + "instantiation": "true", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", - "wall_loops": "6", - "instantiation": "true" + "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Draft @Elegoo Neptune 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Draft @Elegoo Neptune 0.4 nozzle.json index 939d9d3e0d..4d5178d0ff 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Draft @Elegoo Neptune 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Draft @Elegoo Neptune 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "AQnZ1c7zUfkqHzUV", - "from": "system", - "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", "name": "0.24mm Draft @Elegoo Neptune 0.4 nozzle", - "layer_height": "0.24", + "renamed_from": "0.24mm Draft @Elegoo Neptune;0.24mm Draft @Elegoo Neptune2;0.24mm Draft @Elegoo Neptune2D;0.24mm Draft @Elegoo Neptune2S;0.24mm Draft @Elegoo NeptuneX", + "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", + "from": "system", + "setting_id": "AQnZ1c7zUfkqHzUV", "instantiation": "true", - "renamed_from": "0.24mm Draft @Elegoo Neptune;0.24mm Draft @Elegoo Neptune2;0.24mm Draft @Elegoo Neptune2D;0.24mm Draft @Elegoo Neptune2S;0.24mm Draft @Elegoo NeptuneX" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Fine @Elegoo Neptune 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Fine @Elegoo Neptune 0.8 nozzle.json index 5ecf1d6597..1195505088 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Fine @Elegoo Neptune 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Fine @Elegoo Neptune 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "58PjDN7iOw2uuKCa", - "from": "system", "name": "0.24mm Fine @Elegoo Neptune 0.8 nozzle", "inherits": "0.40mm Standard @Elegoo Neptune 0.8 nozzle", - "layer_height": "0.24", - "instantiation": "true" + "from": "system", + "setting_id": "58PjDN7iOw2uuKCa", + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Optimal @Elegoo Neptune 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Optimal @Elegoo Neptune 0.6 nozzle.json index 4564e2836a..c0e47c5aa5 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Optimal @Elegoo Neptune 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.24mm Optimal @Elegoo Neptune 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "9TcC7ocHTTV5fO6u", - "from": "system", "name": "0.24mm Optimal @Elegoo Neptune 0.6 nozzle", "inherits": "0.30mm Standard @Elegoo Neptune 0.6 nozzle", - "layer_height": "0.24", - "instantiation": "true" + "from": "system", + "setting_id": "9TcC7ocHTTV5fO6u", + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle.json index dc1f40365c..8751d16bec 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "gZWSfkY2eEsk2BOj", - "from": "system", - "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo Neptune 0.4 nozzle", - "layer_height": "0.28", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune;0.28mm Extra Draft @Elegoo Neptune2;0.28mm Extra Draft @Elegoo Neptune2D;0.28mm Extra Draft @Elegoo Neptune2S;0.28mm Extra Draft @Elegoo NeptuneX", + "inherits": "0.20mm Standard @Elegoo Neptune 0.4 nozzle", + "from": "system", + "setting_id": "gZWSfkY2eEsk2BOj", "instantiation": "true", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune;0.28mm Extra Draft @Elegoo Neptune2;0.28mm Extra Draft @Elegoo Neptune2D;0.28mm Extra Draft @Elegoo Neptune2S;0.28mm Extra Draft @Elegoo NeptuneX" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.32mm Optimal @Elegoo Neptune 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.32mm Optimal @Elegoo Neptune 0.8 nozzle.json index 21508d6fcb..30262f4649 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.32mm Optimal @Elegoo Neptune 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.32mm Optimal @Elegoo Neptune 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "pubCZO4TSk26n9tN", - "from": "system", "name": "0.32mm Optimal @Elegoo Neptune 0.8 nozzle", "inherits": "0.40mm Standard @Elegoo Neptune 0.8 nozzle", - "layer_height": "0.32", - "instantiation": "true" + "from": "system", + "setting_id": "pubCZO4TSk26n9tN", + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.36mm Draft @Elegoo Neptune 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.36mm Draft @Elegoo Neptune 0.6 nozzle.json index 2c70c48f96..3fa40e6835 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.36mm Draft @Elegoo Neptune 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.36mm Draft @Elegoo Neptune 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "3uIERa8zvsPoVkk8", - "from": "system", "name": "0.36mm Draft @Elegoo Neptune 0.6 nozzle", "inherits": "0.30mm Standard @Elegoo Neptune 0.6 nozzle", - "layer_height": "0.36", - "instantiation": "true" + "from": "system", + "setting_id": "3uIERa8zvsPoVkk8", + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN2SERIES/0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN2SERIES/0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle.json index d0deeae0cd..e99545bc37 100644 --- a/resources/profiles/Elegoo/process/EN2SERIES/0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN2SERIES/0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "xvfDVb6XEH8USrny", - "from": "system", "name": "0.42mm Extra Draft @Elegoo Neptune 0.6 nozzle", "inherits": "0.30mm Standard @Elegoo Neptune 0.6 nozzle", - "layer_height": "0.42", - "instantiation": "true" + "from": "system", + "setting_id": "xvfDVb6XEH8USrny", + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Max 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Max 0.2 nozzle.json index c7551fea08..34ff7bf326 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Max 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Max 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.08mm Optimal @Elegoo N3Max 0.2 nozzle", - "from": "system", "inherits": "0.10mm Standard @Elegoo N3Max 0.2 nozzle", - "layer_height": "0.08", + "from": "system", "setting_id": "XEXWDtkuVN27Z0Ae", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Plus 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Plus 0.2 nozzle.json index 751845d1a7..4e47fdf3b2 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Plus 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Plus 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.08mm Optimal @Elegoo N3Plus 0.2 nozzle", - "from": "system", "inherits": "0.10mm Standard @Elegoo N3Plus 0.2 nozzle", - "layer_height": "0.08", + "from": "system", "setting_id": "oRNlKaMaOZS6N4pT", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Pro 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Pro 0.2 nozzle.json index 98dc95f83c..91f6449c43 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Pro 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.08mm Optimal @Elegoo N3Pro 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.08mm Optimal @Elegoo N3Pro 0.2 nozzle", - "from": "system", "inherits": "0.10mm Standard @Elegoo N3Pro 0.2 nozzle", - "layer_height": "0.08", + "from": "system", "setting_id": "4d4rm5pkuVEpvKUA", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Max 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Max 0.2 nozzle.json index 593b54ea29..eb407e5674 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Max 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Max 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.12mm Draft @Elegoo N3Max 0.2 nozzle", - "from": "system", "inherits": "0.10mm Standard @Elegoo N3Max 0.2 nozzle", + "from": "system", "setting_id": "0tL8rTEK1rEksfWu", "instantiation": "true", "layer_height": "0.12" diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Plus 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Plus 0.2 nozzle.json index ac73a53ff0..001848ec26 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Plus 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Plus 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.12mm Draft @Elegoo N3Plus 0.2 nozzle", - "from": "system", "inherits": "0.10mm Standard @Elegoo N3Plus 0.2 nozzle", - "layer_height": "0.12", + "from": "system", "setting_id": "4H7asjR6qAfYD1zA", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Pro 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Pro 0.2 nozzle.json index 93e0053162..52b0b59650 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Pro 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Draft @Elegoo N3Pro 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.12mm Draft @Elegoo N3Pro 0.2 nozzle", - "from": "system", "inherits": "0.10mm Standard @Elegoo N3Pro 0.2 nozzle", - "layer_height": "0.12", + "from": "system", "setting_id": "B5TzYBAO9JaSXfj8", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Max 0.4 nozzle.json index df15921fc8..310f13fc98 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Max 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", "name": "0.12mm Fine @Elegoo N3Max 0.4 nozzle", - "layer_height": "0.12", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune3Max;0.12mm Fine @Elegoo Neptune3Max", + "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", + "from": "system", "setting_id": "EvN6TYCeyMKxI6Re", "instantiation": "true", - "wall_loops": "3", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune3Max;0.12mm Fine @Elegoo Neptune3Max" + "layer_height": "0.12", + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Plus 0.4 nozzle.json index 3ea7659416..41f6f6683b 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Plus 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", "name": "0.12mm Fine @Elegoo N3Plus 0.4 nozzle", - "layer_height": "0.12", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune3Plus;0.12mm Fine @Elegoo Neptune3Plus", + "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", + "from": "system", "setting_id": "7BlZuuOXdqTj6cV6", "instantiation": "true", - "wall_loops": "3", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune3Plus;0.12mm Fine @Elegoo Neptune3Plus" + "layer_height": "0.12", + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Pro 0.4 nozzle.json index e4e8b01040..6050a1a9cd 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.12mm Fine @Elegoo N3Pro 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", "name": "0.12mm Fine @Elegoo N3Pro 0.4 nozzle", - "layer_height": "0.12", - "wall_loops": "3", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune3;0.08mm Extra Fine @Elegoo Neptune3Pro;0.12mm Fine @Elegoo Neptune3;0.12mm Fine @Elegoo Neptune3Pro", + "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", + "from": "system", "setting_id": "sxbVyUoQQwvDwEgm", "instantiation": "true", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune3;0.08mm Extra Fine @Elegoo Neptune3Pro;0.12mm Fine @Elegoo Neptune3;0.12mm Fine @Elegoo Neptune3Pro" + "layer_height": "0.12", + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Max 0.4 nozzle.json index e6f3e04bc7..2fe8babd91 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", "name": "0.16mm Optimal @Elegoo N3Max 0.4 nozzle", - "layer_height": "0.16", + "renamed_from": "0.16mm Optimal @Elegoo Neptune3Max", + "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", + "from": "system", "setting_id": "TCM0SNa96VA5Dx2H", "instantiation": "true", - "renamed_from": "0.16mm Optimal @Elegoo Neptune3Max" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Plus 0.4 nozzle.json index bdcacf92c7..0d0c52e654 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", "name": "0.16mm Optimal @Elegoo N3Plus 0.4 nozzle", - "layer_height": "0.16", + "renamed_from": "0.16mm Optimal @Elegoo Neptune3Plus", + "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", + "from": "system", "setting_id": "WZhze0PkeqiyOdrj", "instantiation": "true", - "renamed_from": "0.16mm Optimal @Elegoo Neptune3Plus" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Pro 0.4 nozzle.json index 823a13b1be..bc0864f976 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.16mm Optimal @Elegoo N3Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", "name": "0.16mm Optimal @Elegoo N3Pro 0.4 nozzle", - "layer_height": "0.16", + "renamed_from": "0.16mm Optimal @Elegoo Neptune3;0.16mm Optimal @Elegoo Neptune3Pro", + "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", + "from": "system", "setting_id": "xSjvTTFHSiKGi5vc", "instantiation": "true", - "renamed_from": "0.16mm Optimal @Elegoo Neptune3;0.16mm Optimal @Elegoo Neptune3Pro" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Max 0.4 nozzle.json index badc9335be..0cd5f99157 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Max 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "YVbjgCkFSIfI9zDy", "name": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune3Max", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "YVbjgCkFSIfI9zDy", "instantiation": "true", "filename_format": "EN3Max_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "gap_infill_speed": "30", @@ -26,6 +27,5 @@ "travel_speed": "150", "compatible_printers": [ "Elegoo Neptune 3 Max 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune3Max" + ] } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Plus 0.4 nozzle.json index beb35d4ae7..00b47f0dbc 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Plus 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "t2QdKzmUAoGrZTl2", "name": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune3Plus", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "t2QdKzmUAoGrZTl2", "instantiation": "true", "filename_format": "EN3Plus_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "default_acceleration": "1000", @@ -26,6 +27,5 @@ "travel_speed": "200", "compatible_printers": [ "Elegoo Neptune 3 Plus 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune3Plus" + ] } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Pro 0.4 nozzle.json index 68635c0424..eabbef58d0 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Standard @Elegoo N3Pro 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "Z6E0SkSXvbyrgCwI", "name": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune3;0.20mm Standard @Elegoo Neptune3Pro", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "Z6E0SkSXvbyrgCwI", "instantiation": "true", "filename_format": "EN3Pro_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "default_acceleration": "1000", @@ -26,6 +27,5 @@ "travel_speed": "200", "compatible_printers": [ "Elegoo Neptune 3 Pro 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune3;0.20mm Standard @Elegoo Neptune3Pro" + ] } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Max 0.4 nozzle.json index 5e666a782f..cb5d6ce635 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Max 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", "name": "0.20mm Strength @Elegoo N3Max 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", + "from": "system", + "setting_id": "F9cFxKIj5tmaKw0q", + "instantiation": "true", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", - "wall_loops": "6", - "setting_id": "F9cFxKIj5tmaKw0q", - "instantiation": "true" + "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Plus 0.4 nozzle.json index b5b6ce375a..1d98f8670c 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Plus 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", "name": "0.20mm Strength @Elegoo N3Plus 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", + "from": "system", + "setting_id": "dUTKuxKR2EutaNmT", + "instantiation": "true", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", - "wall_loops": "6", - "setting_id": "dUTKuxKR2EutaNmT", - "instantiation": "true" + "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Pro 0.4 nozzle.json index a369fa15e4..e2739cccf6 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.20mm Strength @Elegoo N3Pro 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", "name": "0.20mm Strength @Elegoo N3Pro 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", + "from": "system", + "setting_id": "8A1LaTaH5mFRXIRT", + "instantiation": "true", "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", - "wall_loops": "6", - "setting_id": "8A1LaTaH5mFRXIRT", - "instantiation": "true" + "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Max 0.4 nozzle.json index 81bbeed822..8ea3de4a8a 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", "name": "0.24mm Draft @Elegoo N3Max 0.4 nozzle", - "layer_height": "0.24", + "renamed_from": "0.24mm Draft @Elegoo Neptune3Max", + "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", + "from": "system", "setting_id": "4cjFrdHJQUTXPlhY", "instantiation": "true", - "renamed_from": "0.24mm Draft @Elegoo Neptune3Max" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Plus 0.4 nozzle.json index 647186a296..583b2b0aa9 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", "name": "0.24mm Draft @Elegoo N3Plus 0.4 nozzle", - "layer_height": "0.24", + "renamed_from": "0.24mm Draft @Elegoo Neptune3Plus", + "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", + "from": "system", "setting_id": "YVe8MEaJXZUeE3h4", "instantiation": "true", - "renamed_from": "0.24mm Draft @Elegoo Neptune3Plus" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Pro 0.4 nozzle.json index 84bfc06411..3c4c32a08e 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Draft @Elegoo N3Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", "name": "0.24mm Draft @Elegoo N3Pro 0.4 nozzle", - "layer_height": "0.24", + "renamed_from": "0.24mm Draft @Elegoo Neptune3;0.24mm Draft @Elegoo Neptune3Pro", + "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", + "from": "system", "setting_id": "D8EjvZ18sgk2kVfO", "instantiation": "true", - "renamed_from": "0.24mm Draft @Elegoo Neptune3;0.24mm Draft @Elegoo Neptune3Pro" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Max 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Max 0.8 nozzle.json index 9f1fb265ca..01f46c671b 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Max 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.24mm Fine @Elegoo N3Max 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Max 0.8 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "AIFj2Nkig3Xe3f80", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Plus 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Plus 0.8 nozzle.json index 05753f9621..7c37971f9d 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Plus 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.24mm Fine @Elegoo N3Plus 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Plus 0.8 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "Fo9SwcT3g26U1cJO", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Pro 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Pro 0.8 nozzle.json index 2c43b42df2..900bd39899 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Fine @Elegoo N3Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.24mm Fine @Elegoo N3Pro 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Pro 0.8 nozzle", + "from": "system", "setting_id": "QEh6pEz7MS4x51QA", "instantiation": "true", "layer_height": "0.24" diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Max 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Max 0.6 nozzle.json index 9284fa65e4..ff37a1d0f2 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Max 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.24mm Optimal @Elegoo N3Max 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Max 0.6 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "sRz0TXDOEWnLxXh5", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Plus 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Plus 0.6 nozzle.json index dbf6f01505..c71c7c422d 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Plus 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.24mm Optimal @Elegoo N3Plus 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Plus 0.6 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "T7cpTs4IIK8zix8P", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Pro 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Pro 0.6 nozzle.json index a0fbc1a58b..52ea4e8c08 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.24mm Optimal @Elegoo N3Pro 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.24mm Optimal @Elegoo N3Pro 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Pro 0.6 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "T2QWt3peRdwFJFXE", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle.json index 5feef5dfe9..168d00b90f 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo N3Max 0.4 nozzle", - "layer_height": "0.28", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune3Max", + "inherits": "0.20mm Standard @Elegoo N3Max 0.4 nozzle", + "from": "system", "setting_id": "nJX8mCa1nrWxYsEd", "instantiation": "true", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune3Max" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle.json index 45b060a748..ae7381a4a4 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo N3Plus 0.4 nozzle", - "layer_height": "0.28", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune3Plus", + "inherits": "0.20mm Standard @Elegoo N3Plus 0.4 nozzle", + "from": "system", "setting_id": "7ZbuPzdEsBEeZlOC", "instantiation": "true", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune3Plus" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle.json index fbfcb2f8c4..d6d3d8eb3d 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo N3Pro 0.4 nozzle", - "layer_height": "0.28", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune3;0.28mm Extra Draft @Elegoo Neptune3Pro", + "inherits": "0.20mm Standard @Elegoo N3Pro 0.4 nozzle", + "from": "system", "setting_id": "pcBUWmShCb8ii1Ro", "instantiation": "true", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune3;0.28mm Extra Draft @Elegoo Neptune3Pro" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Max 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Max 1.0 nozzle.json index 524e501772..413db6d902 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Max 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Max 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.30mm Fine @Elegoo N3Max 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Max 1.0 nozzle", - "layer_height": "0.3", + "from": "system", "setting_id": "HMDmYxoPgPEF3o2k", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.3" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Plus 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Plus 1.0 nozzle.json index 88ad4e385a..121f851b6c 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Plus 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Plus 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.30mm Fine @Elegoo N3Plus 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Plus 1.0 nozzle", - "layer_height": "0.3", + "from": "system", "setting_id": "nnGIKTAThcIjqiNY", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.3" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Pro 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Pro 1.0 nozzle.json index d33a7620be..f22d330a05 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Pro 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.30mm Fine @Elegoo N3Pro 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.30mm Fine @Elegoo N3Pro 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Pro 1.0 nozzle", - "layer_height": "0.3", + "from": "system", "setting_id": "PGLk0C6CFjdJgUD2", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.3" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Max 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Max 0.8 nozzle.json index 540bafd120..a46bb223e2 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Max 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.32mm Optimal @Elegoo N3Max 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Max 0.8 nozzle", - "layer_height": "0.32", + "from": "system", "setting_id": "EuI4NCtPdnDgCwod", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Plus 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Plus 0.8 nozzle.json index de45890943..e3e6ad27cc 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Plus 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.32mm Optimal @Elegoo N3Plus 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Plus 0.8 nozzle", - "layer_height": "0.32", + "from": "system", "setting_id": "cWbafri96E6xdetF", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Pro 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Pro 0.8 nozzle.json index 2b0823c3fb..24a6026cc0 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.32mm Optimal @Elegoo N3Pro 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.32mm Optimal @Elegoo N3Pro 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Pro 0.8 nozzle", - "layer_height": "0.32", + "from": "system", "setting_id": "JyNhgxXpE3QGd22F", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Max 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Max 0.6 nozzle.json index 3a5b561cb7..7936351746 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Max 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.36mm Draft @Elegoo N3Max 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Max 0.6 nozzle", - "layer_height": "0.36", + "from": "system", "setting_id": "lyUQ9qqdlT3xOjLa", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Plus 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Plus 0.6 nozzle.json index ab050a47a5..c0aa4c85a1 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Plus 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.36mm Draft @Elegoo N3Plus 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Plus 0.6 nozzle", - "layer_height": "0.36", + "from": "system", "setting_id": "9fgmDydMRIQt1EMc", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Pro 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Pro 0.6 nozzle.json index 4d306b8c9c..477693abdb 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.36mm Draft @Elegoo N3Pro 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.36mm Draft @Elegoo N3Pro 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Pro 0.6 nozzle", - "layer_height": "0.36", + "from": "system", "setting_id": "y577AyAVfQm2t7MC", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Max 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Max 1.0 nozzle.json index b385b6032b..087e4e4187 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Max 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Max 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.40mm Optimal @Elegoo N3Max 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Max 1.0 nozzle", - "layer_height": "0.4", + "from": "system", "setting_id": "SVth0sMD2ndZBpxW", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.4" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Plus 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Plus 1.0 nozzle.json index 8671652915..0103f473fc 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Plus 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Plus 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.40mm Optimal @Elegoo N3Plus 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Plus 1.0 nozzle", - "layer_height": "0.4", + "from": "system", "setting_id": "Bg9wsz7gRUfhdsxO", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.4" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Pro 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Pro 1.0 nozzle.json index 24b31b6c1a..f129f697b1 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Pro 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.40mm Optimal @Elegoo N3Pro 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.40mm Optimal @Elegoo N3Pro 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Pro 1.0 nozzle", - "layer_height": "0.4", + "from": "system", "setting_id": "TTj088WcmPAL0J2v", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.4" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle.json index 64e16d4207..d7408a5423 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.42mm Extra Draft @Elegoo N3Max 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Max 0.6 nozzle", - "layer_height": "0.42", + "from": "system", "setting_id": "q8wRFEbNbhFiR68s", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle.json index 001039fd99..9baa0bd846 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.42mm Extra Draft @Elegoo N3Plus 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Plus 0.6 nozzle", - "layer_height": "0.42", + "from": "system", "setting_id": "S3XpelIawW7YF0tp", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle.json index 72aa6be907..f34162a375 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.42mm Extra Draft @Elegoo N3Pro 0.6 nozzle", - "from": "system", "inherits": "0.30mm Standard @Elegoo N3Pro 0.6 nozzle", - "layer_height": "0.42", + "from": "system", "setting_id": "fZmtvPZ1k15dep6l", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Max 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Max 0.8 nozzle.json index fc26633f8a..9cebf8ef94 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Max 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.48mm Draft @Elegoo N3Max 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Max 0.8 nozzle", - "layer_height": "0.48", + "from": "system", "setting_id": "xpdQ4VMjMsYWaLNA", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Plus 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Plus 0.8 nozzle.json index f7286e3bb5..c24c66df3c 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Plus 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.48mm Draft @Elegoo N3Plus 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Plus 0.8 nozzle", - "layer_height": "0.48", + "from": "system", "setting_id": "5H03Otf81sLLUkRT", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Pro 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Pro 0.8 nozzle.json index cb5da8f8da..ea5736e51a 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.48mm Draft @Elegoo N3Pro 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.48mm Draft @Elegoo N3Pro 0.8 nozzle", - "from": "system", "inherits": "0.40mm Standard @Elegoo N3Pro 0.8 nozzle", - "layer_height": "0.48", + "from": "system", "setting_id": "kC1SOTD5KAkOvmkd", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Max 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Max 1.0 nozzle.json index 4334cd2fb8..a924ba7465 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Max 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Max 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.60mm Draft @Elegoo N3Max 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Max 1.0 nozzle", - "layer_height": "0.6", + "from": "system", "setting_id": "VDAPQAbVmGJlCEUB", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.6" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Plus 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Plus 1.0 nozzle.json index 54172dcdbe..81b9e2705e 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Plus 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Plus 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.60mm Draft @Elegoo N3Plus 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Plus 1.0 nozzle", - "layer_height": "0.6", + "from": "system", "setting_id": "M67oOpMsXtZzCcLQ", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.6" } diff --git a/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Pro 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Pro 1.0 nozzle.json index 26d78b0da3..3038e060d6 100644 --- a/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Pro 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN3SERIES/0.60mm Draft @Elegoo N3Pro 1.0 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", "name": "0.60mm Draft @Elegoo N3Pro 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N3Pro 1.0 nozzle", - "layer_height": "0.6", + "from": "system", "setting_id": "FTb0W3wG9mNPkONL", - "instantiation": "true" + "instantiation": "true", + "layer_height": "0.6" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4 0.2 nozzle.json index bb30a9622a..a0902f4a38 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.08mm Optimal @Elegoo N4 0.2 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4 (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4 0.2 nozzle", + "from": "system", "setting_id": "mPn1wANI8OeyLWGt", "instantiation": "true", - "layer_height": "0.08", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4 (0.2 nozzle)" + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Max 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Max 0.2 nozzle.json index 93bcefb615..a35cfc7024 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Max 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Max 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.08mm Optimal @Elegoo N4Max 0.2 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4Max (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4Max 0.2 nozzle", + "from": "system", "setting_id": "n72kCNTZ1ILUzaiJ", "instantiation": "true", - "layer_height": "0.08", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4Max (0.2 nozzle)" + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Plus 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Plus 0.2 nozzle.json index 5f663fb35c..a9db44da77 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Plus 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Plus 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.08mm Optimal @Elegoo N4Plus 0.2 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4 Plus (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4Plus 0.2 nozzle", + "from": "system", "setting_id": "apACoiYg6U3Z0xwK", "instantiation": "true", - "layer_height": "0.08", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4 Plus (0.2 nozzle)" + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Pro 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Pro 0.2 nozzle.json index ae08228f0f..3435578e98 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Pro 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.08mm Optimal @Elegoo N4Pro 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.08mm Optimal @Elegoo N4Pro 0.2 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4Pro (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4Pro 0.2 nozzle", + "from": "system", "setting_id": "tY0jBQmvK2chT34r", "instantiation": "true", - "layer_height": "0.08", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.2 nozzle);0.16mm Optimal @Elegoo Neptune4Pro (0.2 nozzle)" + "layer_height": "0.08" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4 0.2 nozzle.json index fc4663a2fd..d431496ddc 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.10mm Standard @Elegoo N4 0.2 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)", "inherits": "fdm_process_elegoo_02010", "from": "system", "setting_id": "j8LrMhjmrrWEcnSl", @@ -12,6 +13,5 @@ ], "default_acceleration": "6000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "5000", - "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.2 nozzle)" + "outer_wall_acceleration": "5000" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Max 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Max 0.2 nozzle.json index 793f694514..936cefd906 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Max 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Max 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.10mm Standard @Elegoo N4Max 0.2 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.2 nozzle)", "inherits": "fdm_process_elegoo_02010", "from": "system", "setting_id": "zFHnOUd2WXdPG1d0", @@ -12,6 +13,5 @@ ], "default_acceleration": "3000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "1500", - "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.2 nozzle)" + "outer_wall_acceleration": "1500" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Plus 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Plus 0.2 nozzle.json index 4064775c34..17983a171c 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Plus 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Plus 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.10mm Standard @Elegoo N4Plus 0.2 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)", "inherits": "fdm_process_elegoo_02010", "from": "system", "setting_id": "RpheR4sGaJlp7yJp", @@ -12,6 +13,5 @@ ], "default_acceleration": "5000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "2500", - "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.2 nozzle)" + "outer_wall_acceleration": "2500" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Pro 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Pro 0.2 nozzle.json index 6f611b6f10..856403c945 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Pro 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.10mm Standard @Elegoo N4Pro 0.2 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.10mm Standard @Elegoo N4Pro 0.2 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)", "inherits": "fdm_process_elegoo_02010", "from": "system", "setting_id": "EH1TvdVsdTCuvv2c", @@ -12,6 +13,5 @@ ], "default_acceleration": "6000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "5000", - "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.2 nozzle)" + "outer_wall_acceleration": "5000" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4 0.2 nozzle.json index fea092f942..903f60ea17 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.12mm Draft @Elegoo N4 0.2 nozzle", - "from": "system", + "renamed_from": "0.12mm Fine @Elegoo Neptune4 (0.2 nozzle);0.24mm Draft @Elegoo Neptune4 (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4 (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4 0.2 nozzle", + "from": "system", "setting_id": "Vis3rzOs4NILDE6C", "instantiation": "true", - "layer_height": "0.12", - "renamed_from": "0.12mm Fine @Elegoo Neptune4 (0.2 nozzle);0.24mm Draft @Elegoo Neptune4 (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4 (0.2 nozzle)" + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Max 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Max 0.2 nozzle.json index 318662d214..eac769ef26 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Max 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Max 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.12mm Draft @Elegoo N4Max 0.2 nozzle", - "from": "system", + "renamed_from": "0.12mm Fine @Elegoo Neptune4Max (0.2 nozzle);0.24mm Draft @Elegoo Neptune4Max (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4Max (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4Max 0.2 nozzle", + "from": "system", "setting_id": "BdbN0fjzy0GtRZty", "instantiation": "true", - "layer_height": "0.12", - "renamed_from": "0.12mm Fine @Elegoo Neptune4Max (0.2 nozzle);0.24mm Draft @Elegoo Neptune4Max (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4Max (0.2 nozzle)" + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Plus 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Plus 0.2 nozzle.json index 5e6c3b13b0..1a26f69852 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Plus 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Plus 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.12mm Draft @Elegoo N4Plus 0.2 nozzle", - "from": "system", + "renamed_from": "0.12mm Fine @Elegoo Neptune4 Plus (0.2 nozzle);0.24mm Draft @Elegoo Neptune4 Plus (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4 Plus (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4Plus 0.2 nozzle", + "from": "system", "setting_id": "zPlAvLncVwzD1wCI", "instantiation": "true", - "layer_height": "0.12", - "renamed_from": "0.12mm Fine @Elegoo Neptune4 Plus (0.2 nozzle);0.24mm Draft @Elegoo Neptune4 Plus (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4 Plus (0.2 nozzle)" + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Pro 0.2 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Pro 0.2 nozzle.json index 62ceae2703..04fbd5753f 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Pro 0.2 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Draft @Elegoo N4Pro 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.12mm Draft @Elegoo N4Pro 0.2 nozzle", - "from": "system", + "renamed_from": "0.12mm Fine @Elegoo Neptune4Pro (0.2 nozzle);0.24mm Draft @Elegoo Neptune4Pro (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4Pro (0.2 nozzle)", "inherits": "0.10mm Standard @Elegoo N4Pro 0.2 nozzle", + "from": "system", "setting_id": "UpIR8nVGr9eXImwd", "instantiation": "true", - "layer_height": "0.12", - "renamed_from": "0.12mm Fine @Elegoo Neptune4Pro (0.2 nozzle);0.24mm Draft @Elegoo Neptune4Pro (0.2 nozzle);0.28mm Extra Draft @Elegoo Neptune4Pro (0.2 nozzle)" + "layer_height": "0.12" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4 0.4 nozzle.json index 4c4e045ce5..659e6ea759 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", + "name": "0.12mm Fine @Elegoo N4 0.4 nozzle", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.4 nozzle);0.12mm Fine @Elegoo Neptune4 (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", + "from": "system", "setting_id": "RQ9dC2A0MkeEXleJ", "instantiation": "true", - "name": "0.12mm Fine @Elegoo N4 0.4 nozzle", "layer_height": "0.12", - "wall_loops": "3", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.4 nozzle);0.12mm Fine @Elegoo Neptune4 (0.4 nozzle)" + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Max 0.4 nozzle.json index afd2451e06..2eadf5cd0c 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Max 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", + "name": "0.12mm Fine @Elegoo N4Max 0.4 nozzle", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.4 nozzle);0.12mm Fine @Elegoo Neptune4Max (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", + "from": "system", "setting_id": "YJTSqtPEGZDih9XE", "instantiation": "true", - "name": "0.12mm Fine @Elegoo N4Max 0.4 nozzle", "layer_height": "0.12", - "wall_loops": "3", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.4 nozzle);0.12mm Fine @Elegoo Neptune4Max (0.4 nozzle)" + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Plus 0.4 nozzle.json index f69751563e..d2294ac9a0 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Plus 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", + "name": "0.12mm Fine @Elegoo N4Plus 0.4 nozzle", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.4 nozzle);0.12mm Fine @Elegoo Neptune4 Plus (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", + "from": "system", "setting_id": "9BipQyur4imL8jml", "instantiation": "true", - "name": "0.12mm Fine @Elegoo N4Plus 0.4 nozzle", "layer_height": "0.12", - "wall_loops": "3", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.4 nozzle);0.12mm Fine @Elegoo Neptune4 Plus (0.4 nozzle)" + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Pro 0.4 nozzle.json index 500ba47b84..c73263f6ff 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.12mm Fine @Elegoo N4Pro 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", + "name": "0.12mm Fine @Elegoo N4Pro 0.4 nozzle", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle);0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", + "from": "system", "setting_id": "iN9aVhyxLhUdhDdG", "instantiation": "true", - "name": "0.12mm Fine @Elegoo N4Pro 0.4 nozzle", "layer_height": "0.12", - "wall_loops": "3", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.4 nozzle);0.12mm Fine @Elegoo Neptune4Pro (0.4 nozzle)" + "wall_loops": "3" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4 0.4 nozzle.json index 819552c612..5c44b2ae5a 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.16mm Optimal @Elegoo N4 0.4 nozzle", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4 (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", + "from": "system", "setting_id": "Cbq6b2Enl5dz7R61", "instantiation": "true", - "name": "0.16mm Optimal @Elegoo N4 0.4 nozzle", - "layer_height": "0.16", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4 (0.4 nozzle)" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Max 0.4 nozzle.json index 05ad8379a9..e7283fb678 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.16mm Optimal @Elegoo N4Max 0.4 nozzle", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4Max (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", + "from": "system", "setting_id": "StpHJelrwAxTFcwx", "instantiation": "true", - "name": "0.16mm Optimal @Elegoo N4Max 0.4 nozzle", - "layer_height": "0.16", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4Max (0.4 nozzle)" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Plus 0.4 nozzle.json index b7e0e6bcb0..f1821e5c43 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.16mm Optimal @Elegoo N4Plus 0.4 nozzle", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4 Plus (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", + "from": "system", "setting_id": "rldSbNbKZcfEVZqR", "instantiation": "true", - "name": "0.16mm Optimal @Elegoo N4Plus 0.4 nozzle", - "layer_height": "0.16", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4 Plus (0.4 nozzle)" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Pro 0.4 nozzle.json index fe95ed6e04..a710a00b74 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.16mm Optimal @Elegoo N4Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.16mm Optimal @Elegoo N4Pro 0.4 nozzle", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle)", "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", + "from": "system", "setting_id": "SNO9sWlpg5QylF2U", "instantiation": "true", - "name": "0.16mm Optimal @Elegoo N4Pro 0.4 nozzle", - "layer_height": "0.16", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4Pro (0.4 nozzle)" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4 0.4 nozzle.json index 8904a2de16..e1386c5e48 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "KX7Cn4tNCSa1BMpF", "name": "0.20mm Standard @Elegoo N4 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "KX7Cn4tNCSa1BMpF", "instantiation": "true", "filename_format": "EN4_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "default_acceleration": "6000", @@ -12,6 +13,5 @@ "min_width_top_surface": "50%", "compatible_printers": [ "Elegoo Neptune 4 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.4 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Max 0.4 nozzle.json index 418d9824c0..349f1dab0c 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Max 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "6llMZka0sgQ4w50C", "name": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.4 nozzle)", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "6llMZka0sgQ4w50C", "instantiation": "true", "filename_format": "EN4Max_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "default_acceleration": "3000", @@ -12,6 +13,5 @@ "min_width_top_surface": "50%", "compatible_printers": [ "Elegoo Neptune 4 Max 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.4 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Plus 0.4 nozzle.json index 316a5d8dec..d31b34e6ce 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Plus 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "EWip2jSpsehCzgdG", "name": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "EWip2jSpsehCzgdG", "instantiation": "true", "filename_format": "EN4Plus_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "default_acceleration": "5000", @@ -12,6 +13,5 @@ "min_width_top_surface": "50%", "compatible_printers": [ "Elegoo Neptune 4 Plus 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.4 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Pro 0.4 nozzle.json index d9d74a5fb0..145afaa989 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Standard @Elegoo N4Pro 0.4 nozzle.json @@ -1,9 +1,10 @@ { "type": "process", - "setting_id": "ev7Dl6VzLoldRKK3", "name": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", - "from": "system", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)", "inherits": "fdm_process_elegoo_04020", + "from": "system", + "setting_id": "ev7Dl6VzLoldRKK3", "instantiation": "true", "filename_format": "EN4Pro_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "default_acceleration": "6000", @@ -12,6 +13,5 @@ "min_width_top_surface": "50%", "compatible_printers": [ "Elegoo Neptune 4 Pro 0.4 nozzle" - ], - "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.4 nozzle)" + ] } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4 0.4 nozzle.json index 7b3f4c2e64..98cb1470f1 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", "name": "0.20mm Strength @Elegoo N4 0.4 nozzle", - "wall_sequence": "inner-outer-inner wall", + "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", + "from": "system", "setting_id": "WBaSzHgrqKENej4G", "instantiation": "true", + "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Max 0.4 nozzle.json index 54ad422763..f701643d83 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Max 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", "name": "0.20mm Strength @Elegoo N4Max 0.4 nozzle", - "wall_sequence": "inner-outer-inner wall", + "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", + "from": "system", "setting_id": "HaK3rpieMESKs6PY", "instantiation": "true", + "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Plus 0.4 nozzle.json index 831205c4d7..a61ed21ae8 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Plus 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", "name": "0.20mm Strength @Elegoo N4Plus 0.4 nozzle", - "wall_sequence": "inner-outer-inner wall", + "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", + "from": "system", "setting_id": "ad0UueKfT6sGUn0I", "instantiation": "true", + "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Pro 0.4 nozzle.json index 0d475532a4..71cd7c1b92 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.20mm Strength @Elegoo N4Pro 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", "name": "0.20mm Strength @Elegoo N4Pro 0.4 nozzle", - "wall_sequence": "inner-outer-inner wall", + "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", + "from": "system", "setting_id": "LrBDOuD4h741FItb", "instantiation": "true", + "wall_sequence": "inner-outer-inner wall", "reduce_crossing_wall": "1", "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4 0.4 nozzle.json index e0a2eaabd9..120ee7171f 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", "name": "0.24mm Draft @Elegoo N4 0.4 nozzle", + "renamed_from": "0.24mm Draft @Elegoo Neptune4 (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", + "from": "system", "setting_id": "3bX9fmM7GOKwsWLc", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.24mm Draft @Elegoo Neptune4 (0.4 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Max 0.4 nozzle.json index 7035c986c8..cdc064da5a 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", "name": "0.24mm Draft @Elegoo N4Max 0.4 nozzle", + "renamed_from": "0.24mm Draft @Elegoo Neptune4Max (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", + "from": "system", "setting_id": "I5pPHYUqGEV4faQe", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.24mm Draft @Elegoo Neptune4Max (0.4 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Plus 0.4 nozzle.json index aec452e1b0..07dbfe2095 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", "name": "0.24mm Draft @Elegoo N4Plus 0.4 nozzle", + "renamed_from": "0.24mm Draft @Elegoo Neptune4 Plus (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", + "from": "system", "setting_id": "TUwtXktoDMUFiUjH", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.24mm Draft @Elegoo Neptune4 Plus (0.4 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Pro 0.4 nozzle.json index 20acd0a27c..8cd1ca3d67 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Draft @Elegoo N4Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", "name": "0.24mm Draft @Elegoo N4Pro 0.4 nozzle", + "renamed_from": "0.24mm Draft @Elegoo Neptune4Pro (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", + "from": "system", "setting_id": "JSPwiPfUUfrEmRLx", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.24mm Draft @Elegoo Neptune4Pro (0.4 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4 0.8 nozzle.json index d093eeaf65..b073c67b8d 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Fine @Elegoo N4 0.8 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.8 nozzle);0.12mm Fine @Elegoo Neptune4 (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4 0.8 nozzle", + "from": "system", "setting_id": "HUtKrGQKYKgX2DSp", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.8 nozzle);0.12mm Fine @Elegoo Neptune4 (0.8 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Max 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Max 0.8 nozzle.json index 493fd9ff9a..6c1b56167e 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Max 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Fine @Elegoo N4Max 0.8 nozzle", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.8 nozzle);0.12mm Fine @Elegoo Neptune4Max (0.8 nozzle)", + "inherits": "0.40mm Standard @Elegoo N4Max 0.8 nozzle", "from": "system", "setting_id": "8eKtU9RlWvWk8MfS", "instantiation": "true", - "inherits": "0.40mm Standard @Elegoo N4Max 0.8 nozzle", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.8 nozzle);0.12mm Fine @Elegoo Neptune4Max (0.8 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Plus 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Plus 0.8 nozzle.json index 6bdaeb44c2..697eac529b 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Fine @Elegoo N4Plus 0.8 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.8 nozzle);0.12mm Fine @Elegoo Neptune4 Plus (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Plus 0.8 nozzle", + "from": "system", "setting_id": "hRKqKq27wVaeLAPG", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.8 nozzle);0.12mm Fine @Elegoo Neptune4 Plus (0.8 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Pro 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Pro 0.8 nozzle.json index 2449ed7c4b..4431caf445 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Fine @Elegoo N4Pro 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Fine @Elegoo N4Pro 0.8 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.8 nozzle);0.12mm Fine @Elegoo Neptune4Pro (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Pro 0.8 nozzle", + "from": "system", "setting_id": "OcNAeI4a7QtbFJ6W", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.8 nozzle);0.12mm Fine @Elegoo Neptune4Pro (0.8 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4 0.6 nozzle.json index ff72b55af4..be2bedfb89 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Optimal @Elegoo N4 0.6 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.6 nozzle);0.12mm Fine @Elegoo Neptune4 (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4 (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4 0.6 nozzle", + "from": "system", "setting_id": "EX3MNVdWZSogtuND", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 (0.6 nozzle);0.12mm Fine @Elegoo Neptune4 (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4 (0.6 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Max 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Max 0.6 nozzle.json index e54636a0b6..6b4eae42dc 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Max 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Optimal @Elegoo N4Max 0.6 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.6 nozzle);0.12mm Fine @Elegoo Neptune4Max (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4Max (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Max 0.6 nozzle", + "from": "system", "setting_id": "KvtJF6N8LWqwgBJu", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Max (0.6 nozzle);0.12mm Fine @Elegoo Neptune4Max (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4Max (0.6 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Plus 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Plus 0.6 nozzle.json index fcbc9a9066..47582bb842 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Optimal @Elegoo N4Plus 0.6 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.6 nozzle);0.12mm Fine @Elegoo Neptune4 Plus (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4 Plus (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Plus 0.6 nozzle", + "from": "system", "setting_id": "vVYW2JeI230MxnFV", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4 Plus (0.6 nozzle);0.12mm Fine @Elegoo Neptune4 Plus (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4 Plus (0.6 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Pro 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Pro 0.6 nozzle.json index 9f225d96f5..da502a172d 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.24mm Optimal @Elegoo N4Pro 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.24mm Optimal @Elegoo N4Pro 0.6 nozzle", - "from": "system", + "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.6 nozzle);0.12mm Fine @Elegoo Neptune4Pro (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4Pro (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Pro 0.6 nozzle", + "from": "system", "setting_id": "3mpKq49ZsvU2jr1J", "instantiation": "true", - "layer_height": "0.24", - "renamed_from": "0.08mm Extra Fine @Elegoo Neptune4Pro (0.6 nozzle);0.12mm Fine @Elegoo Neptune4Pro (0.6 nozzle);0.16mm Optimal @Elegoo Neptune4Pro (0.6 nozzle)" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4 0.4 nozzle.json index 3495255fee..00031f343e 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo N4 0.4 nozzle", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4 0.4 nozzle", + "from": "system", "setting_id": "d1EZu3O7DCEtvUo9", "instantiation": "true", - "layer_height": "0.28", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 (0.4 nozzle)" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle.json index 316c9f9376..8af768caee 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo N4Max 0.4 nozzle", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Max (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4Max 0.4 nozzle", + "from": "system", "setting_id": "uBXPR8bbDu4tnfZ7", "instantiation": "true", - "layer_height": "0.28", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Max (0.4 nozzle)" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle.json index 195d30d125..4475997940 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo N4Plus 0.4 nozzle", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 Plus (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4Plus 0.4 nozzle", + "from": "system", "setting_id": "McXTTMnfUYmOZHcI", "instantiation": "true", - "layer_height": "0.28", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 Plus (0.4 nozzle)" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle.json index 98e5594b4c..be50ba0bb3 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", "name": "0.28mm Extra Draft @Elegoo N4Pro 0.4 nozzle", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Pro (0.4 nozzle)", + "inherits": "0.20mm Standard @Elegoo N4Pro 0.4 nozzle", + "from": "system", "setting_id": "qIl89vLzpnjOmZMG", "instantiation": "true", - "layer_height": "0.28", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Pro (0.4 nozzle)" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4 1.0 nozzle.json index f159ca8b8e..5f287a1ed6 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.30mm Fine @Elegoo N4 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4 1.0 nozzle", + "from": "system", "setting_id": "LSxHoq8lDbiY0WwD", "instantiation": "true", "layer_height": "0.3" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Max 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Max 1.0 nozzle.json index 4dda55dcb9..c28369ad54 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Max 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Max 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.30mm Fine @Elegoo N4Max 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Max 1.0 nozzle", + "from": "system", "setting_id": "Usm5LQIdEG5qte0Z", "instantiation": "true", "layer_height": "0.3" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Plus 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Plus 1.0 nozzle.json index 57db88d6c0..f14bbdd458 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Plus 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Plus 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.30mm Fine @Elegoo N4Plus 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Plus 1.0 nozzle", + "from": "system", "setting_id": "sSKLKqIlQsgkvBoj", "instantiation": "true", "layer_height": "0.3" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Pro 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Pro 1.0 nozzle.json index 3b9ca2ba34..57661ac6a8 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Pro 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Fine @Elegoo N4Pro 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.30mm Fine @Elegoo N4Pro 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Pro 1.0 nozzle", + "from": "system", "setting_id": "Fs44Eg0QxZTwNB4i", "instantiation": "true", "layer_height": "0.3" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4 0.6 nozzle.json index 4b0d1d7041..92858aedd6 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.30mm Standard @Elegoo N4 0.6 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)", "inherits": "fdm_process_elegoo_06030", "from": "system", "setting_id": "X0otPkxfrqhtmKyX", @@ -11,6 +12,5 @@ ], "default_acceleration": "6000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "5000", - "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.6 nozzle)" + "outer_wall_acceleration": "5000" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Max 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Max 0.6 nozzle.json index 9f10ee23f4..f8efc3ca05 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Max 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.30mm Standard @Elegoo N4Max 0.6 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)", "inherits": "fdm_process_elegoo_06030", "from": "system", "setting_id": "Vy5RnlR6iFs2Uo4Z", @@ -11,6 +12,5 @@ ], "default_acceleration": "3000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "1500", - "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.6 nozzle)" + "outer_wall_acceleration": "1500" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Plus 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Plus 0.6 nozzle.json index 653de53108..cea5c991e9 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Plus 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.30mm Standard @Elegoo N4Plus 0.6 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)", "inherits": "fdm_process_elegoo_06030", "from": "system", "setting_id": "VtWElYWASazfYCCd", @@ -11,6 +12,5 @@ ], "default_acceleration": "5000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "2500", - "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.6 nozzle)" + "outer_wall_acceleration": "2500" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Pro 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Pro 0.6 nozzle.json index 603c81acb4..291c14166b 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.30mm Standard @Elegoo N4Pro 0.6 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.30mm Standard @Elegoo N4Pro 0.6 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)", "inherits": "fdm_process_elegoo_06030", "from": "system", "setting_id": "rNfnCbVknDzyGq7a", @@ -11,6 +12,5 @@ ], "default_acceleration": "6000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "5000", - "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.6 nozzle)" + "outer_wall_acceleration": "5000" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4 0.8 nozzle.json index 444ca610ff..e5049ab07b 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.32mm Optimal @Elegoo N4 0.8 nozzle", - "from": "system", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4 (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4 (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4 0.8 nozzle", + "from": "system", "setting_id": "qzrXP9bCuf6aoqg6", "instantiation": "true", - "layer_height": "0.32", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4 (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4 (0.8 nozzle)" + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Max 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Max 0.8 nozzle.json index b27212d71a..adfe70dbd2 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Max 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.32mm Optimal @Elegoo N4Max 0.8 nozzle", - "from": "system", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4Max (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4Max (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Max 0.8 nozzle", + "from": "system", "setting_id": "G3FnBHsN3NV7ZfTR", "instantiation": "true", - "layer_height": "0.32", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4Max (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4Max (0.8 nozzle)" + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Plus 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Plus 0.8 nozzle.json index ab89009c71..9b6a97a83c 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.32mm Optimal @Elegoo N4Plus 0.8 nozzle", - "from": "system", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4 Plus (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4 Plus (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Plus 0.8 nozzle", + "from": "system", "setting_id": "xbAlLK2WW32kCp3z", "instantiation": "true", - "layer_height": "0.32", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4 Plus (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4 Plus (0.8 nozzle)" + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Pro 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Pro 0.8 nozzle.json index 2dd5be1fbf..09d0f7ee49 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.32mm Optimal @Elegoo N4Pro 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.32mm Optimal @Elegoo N4Pro 0.8 nozzle", - "from": "system", + "renamed_from": "0.16mm Optimal @Elegoo Neptune4Pro (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Pro 0.8 nozzle", + "from": "system", "setting_id": "KOk0kTX3EelPCG3R", "instantiation": "true", - "layer_height": "0.32", - "renamed_from": "0.16mm Optimal @Elegoo Neptune4Pro (0.8 nozzle);0.28mm Extra Draft @Elegoo Neptune4Pro (0.8 nozzle)" + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4 0.6 nozzle.json index 827c319064..b9c0a86537 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.36mm Draft @Elegoo N4 0.6 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4 (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4 0.6 nozzle", + "from": "system", "setting_id": "RPUd5w4RMBgxhvgu", "instantiation": "true", - "layer_height": "0.36", - "renamed_from": "0.24mm Draft @Elegoo Neptune4 (0.6 nozzle)" + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Max 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Max 0.6 nozzle.json index 1facc52b31..886865680a 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Max 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.36mm Draft @Elegoo N4Max 0.6 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4Max (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Max 0.6 nozzle", + "from": "system", "setting_id": "C9QhIRg3uvqiceM9", "instantiation": "true", - "layer_height": "0.36", - "renamed_from": "0.24mm Draft @Elegoo Neptune4Max (0.6 nozzle)" + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Plus 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Plus 0.6 nozzle.json index 6e05f6655f..f00a560ddd 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.36mm Draft @Elegoo N4Plus 0.6 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4 Plus (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Plus 0.6 nozzle", + "from": "system", "setting_id": "6LT83N9zzhnyndd1", "instantiation": "true", - "layer_height": "0.36", - "renamed_from": "0.24mm Draft @Elegoo Neptune4 Plus (0.6 nozzle)" + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Pro 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Pro 0.6 nozzle.json index 7380250779..7d981cc1b5 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.36mm Draft @Elegoo N4Pro 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.36mm Draft @Elegoo N4Pro 0.6 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4Pro (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Pro 0.6 nozzle", + "from": "system", "setting_id": "uV8fOfHicJZXuBrG", "instantiation": "true", - "layer_height": "0.36", - "renamed_from": "0.24mm Draft @Elegoo Neptune4Pro (0.6 nozzle)" + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4 1.0 nozzle.json index e1c9dc2ebf..41062da83d 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.40mm Optimal @Elegoo N4 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4 1.0 nozzle", + "from": "system", "setting_id": "knCmCemB0pCsXI9H", "instantiation": "true", "layer_height": "0.4" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Max 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Max 1.0 nozzle.json index 2db783f9c1..7184631de3 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Max 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Max 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.40mm Optimal @Elegoo N4Max 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Max 1.0 nozzle", + "from": "system", "setting_id": "O0MSBh9OeaZDP7ow", "instantiation": "true", "layer_height": "0.4" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Plus 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Plus 1.0 nozzle.json index f5abebabbb..6e57163463 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Plus 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Plus 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.40mm Optimal @Elegoo N4Plus 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Plus 1.0 nozzle", + "from": "system", "setting_id": "rxq0eIQKDme3F1Es", "instantiation": "true", "layer_height": "0.4" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Pro 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Pro 1.0 nozzle.json index 56bc5cd096..0798fc7630 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Pro 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Optimal @Elegoo N4Pro 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.40mm Optimal @Elegoo N4Pro 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Pro 1.0 nozzle", + "from": "system", "setting_id": "tc7tn1h9Sf3B0D0X", "instantiation": "true", "layer_height": "0.4" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4 0.8 nozzle.json index a07bccbda1..c4440bf396 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.40mm Standard @Elegoo N4 0.8 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)", "inherits": "fdm_process_elegoo_08040", "from": "system", "setting_id": "VnE7I5kpYjaWE9TQ", @@ -11,6 +12,5 @@ ], "default_acceleration": "6000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "5000", - "renamed_from": "0.20mm Standard @Elegoo Neptune4 (0.8 nozzle)" + "outer_wall_acceleration": "5000" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Max 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Max 0.8 nozzle.json index c3fd42ae08..3c398e5473 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Max 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.40mm Standard @Elegoo N4Max 0.8 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.8 nozzle)", "inherits": "fdm_process_elegoo_08040", "from": "system", "setting_id": "tgLcMBDWsMF48oRZ", @@ -11,6 +12,5 @@ ], "default_acceleration": "3000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "1500", - "renamed_from": "0.20mm Standard @Elegoo Neptune4Max (0.8 nozzle)" + "outer_wall_acceleration": "1500" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Plus 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Plus 0.8 nozzle.json index 768d30d0a1..45b9a3bb84 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Plus 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.40mm Standard @Elegoo N4Plus 0.8 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)", "inherits": "fdm_process_elegoo_08040", "from": "system", "setting_id": "9o2i5h6e4I7l7QOg", @@ -11,6 +12,5 @@ ], "default_acceleration": "5000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "2500", - "renamed_from": "0.20mm Standard @Elegoo Neptune4 Plus (0.8 nozzle)" + "outer_wall_acceleration": "2500" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Pro 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Pro 0.8 nozzle.json index 5cd78291fc..c9c2761c65 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.40mm Standard @Elegoo N4Pro 0.8 nozzle.json @@ -1,6 +1,7 @@ { "type": "process", "name": "0.40mm Standard @Elegoo N4Pro 0.8 nozzle", + "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)", "inherits": "fdm_process_elegoo_08040", "from": "system", "setting_id": "xFnwaHCJymLM4Bgb", @@ -11,6 +12,5 @@ ], "default_acceleration": "6000", "min_width_top_surface": "50%", - "outer_wall_acceleration": "5000", - "renamed_from": "0.20mm Standard @Elegoo Neptune4Pro (0.8 nozzle)" + "outer_wall_acceleration": "5000" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4 0.6 nozzle.json index 1c43c12f8b..2461ad12a5 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.42mm Extra Draft @Elegoo N4 0.6 nozzle", - "from": "system", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4 0.6 nozzle", + "from": "system", "setting_id": "XlLhnDcy7S6BcaFE", "instantiation": "true", - "layer_height": "0.42", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 (0.6 nozzle)" + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle.json index f6d276ebb6..c5c1cfbbe2 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.42mm Extra Draft @Elegoo N4Max 0.6 nozzle", - "from": "system", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Max (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Max 0.6 nozzle", + "from": "system", "setting_id": "oPxKL0bgR2gX0Ijh", "instantiation": "true", - "layer_height": "0.42", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Max (0.6 nozzle)" + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle.json index 7def2341c6..0a90e61896 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.42mm Extra Draft @Elegoo N4Plus 0.6 nozzle", - "from": "system", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 Plus (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Plus 0.6 nozzle", + "from": "system", "setting_id": "qY9HPvv16AZMQj4O", "instantiation": "true", - "layer_height": "0.42", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4 Plus (0.6 nozzle)" + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle.json index d060f49384..bff2a4b016 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.42mm Extra Draft @Elegoo N4Pro 0.6 nozzle", - "from": "system", + "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Pro (0.6 nozzle)", "inherits": "0.30mm Standard @Elegoo N4Pro 0.6 nozzle", + "from": "system", "setting_id": "o1GuCAN5AF2cjFRZ", "instantiation": "true", - "layer_height": "0.42", - "renamed_from": "0.28mm Extra Draft @Elegoo Neptune4Pro (0.6 nozzle)" + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4 0.8 nozzle.json index 41feffa308..8e9e970cb2 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.48mm Draft @Elegoo N4 0.8 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4 (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4 0.8 nozzle", + "from": "system", "setting_id": "SBUBC3tTWEsoUDwB", "instantiation": "true", - "layer_height": "0.48", - "renamed_from": "0.24mm Draft @Elegoo Neptune4 (0.8 nozzle)" + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Max 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Max 0.8 nozzle.json index e0a4de6b6a..05c2713f77 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Max 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Max 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.48mm Draft @Elegoo N4Max 0.8 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4Max (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Max 0.8 nozzle", + "from": "system", "setting_id": "O8HQgyqJNT6oHFL1", "instantiation": "true", - "layer_height": "0.48", - "renamed_from": "0.24mm Draft @Elegoo Neptune4Max (0.8 nozzle)" + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Plus 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Plus 0.8 nozzle.json index f6f5655f0d..dcd7156e56 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Plus 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Plus 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.48mm Draft @Elegoo N4Plus 0.8 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4 Plus (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Plus 0.8 nozzle", + "from": "system", "setting_id": "DSXwIJeZIaTQNJdD", "instantiation": "true", - "layer_height": "0.48", - "renamed_from": "0.24mm Draft @Elegoo Neptune4 Plus (0.8 nozzle)" + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Pro 0.8 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Pro 0.8 nozzle.json index 796fc78212..fcc66b3900 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Pro 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.48mm Draft @Elegoo N4Pro 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", "name": "0.48mm Draft @Elegoo N4Pro 0.8 nozzle", - "from": "system", + "renamed_from": "0.24mm Draft @Elegoo Neptune4Pro (0.8 nozzle)", "inherits": "0.40mm Standard @Elegoo N4Pro 0.8 nozzle", + "from": "system", "setting_id": "GYMUhWOFDMRwYdxY", "instantiation": "true", - "layer_height": "0.48", - "renamed_from": "0.24mm Draft @Elegoo Neptune4Pro (0.8 nozzle)" + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4 1.0 nozzle.json index 6da75b45b4..83291412e3 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.60mm Draft @Elegoo N4 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4 1.0 nozzle", + "from": "system", "setting_id": "Y8DwHQxs3j9DEU2v", "instantiation": "true", "layer_height": "0.6" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Max 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Max 1.0 nozzle.json index c713999503..cbf3c2e5c3 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Max 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Max 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.60mm Draft @Elegoo N4Max 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Max 1.0 nozzle", + "from": "system", "setting_id": "QoV7xebXnXFxPc1G", "instantiation": "true", "layer_height": "0.6" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Plus 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Plus 1.0 nozzle.json index 78e01e0765..e296202055 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Plus 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Plus 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.60mm Draft @Elegoo N4Plus 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Plus 1.0 nozzle", + "from": "system", "setting_id": "f5rYjm5HnjXGeRv9", "instantiation": "true", "layer_height": "0.6" diff --git a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Pro 1.0 nozzle.json b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Pro 1.0 nozzle.json index e935f52c72..2de38474da 100644 --- a/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Pro 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EN4SERIES/0.60mm Draft @Elegoo N4Pro 1.0 nozzle.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.60mm Draft @Elegoo N4Pro 1.0 nozzle", - "from": "system", "inherits": "0.50mm Standard @Elegoo N4Pro 1.0 nozzle", + "from": "system", "setting_id": "pjsuqOu6iU4ZDjfL", "instantiation": "true", "layer_height": "0.6" diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json index 965365edd6..b4adafc224 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.16mm Optimal @Elegoo Giga 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle", + "renamed_from": "0.16mm Optimal @EOS Giga 0.4 nozzle", "inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle", - "layer_height": "0.16", + "from": "system", "setting_id": "XLb4AmNTfuDRMWQl", "instantiation": "true", - "renamed_from": "0.16mm Optimal @EOS Giga 0.4 nozzle", - "name": "0.16mm Optimal @Elegoo Giga 0.4 nozzle" + "layer_height": "0.16" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json index f82182d302..76e69eb5a9 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.18mm Fine @Elegoo Giga 0.6 nozzle.json @@ -1,12 +1,12 @@ { "type": "process", - "from": "system", + "name": "0.18mm Fine @Elegoo Giga 0.6 nozzle", + "renamed_from": "0.18mm Fine @EOS Giga 0.6 nozzle", "inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle", - "layer_height": "0.18", + "from": "system", "setting_id": "xxVHp48sijSkmOCr", "instantiation": "true", - "renamed_from": "0.18mm Fine @EOS Giga 0.6 nozzle", - "name": "0.18mm Fine @Elegoo Giga 0.6 nozzle", + "layer_height": "0.18", "compatible_printers": [ "Elegoo OrangeStorm Giga 0.6 nozzle" ] diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json index 1dc016e684..bca4437c89 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Standard @Elegoo Giga 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", "name": "0.20mm Standard @Elegoo Giga 0.4 nozzle", + "renamed_from": "0.20mm Standard @EOS Giga 0.4 nozzle", "inherits": "fdm_process_elegoo_04020", "from": "system", "setting_id": "GIglVjgVd5bAy2nW", "instantiation": "true", - "renamed_from": "0.20mm Standard @EOS Giga 0.4 nozzle", "default_acceleration": "3000", "filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json index 432e7b60d2..dc25639b17 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.20mm Strength @Elegoo Giga 0.4 nozzle.json @@ -1,12 +1,12 @@ { "type": "process", - "from": "system", - "inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle", "name": "0.20mm Strength @Elegoo Giga 0.4 nozzle", - "wall_sequence": "inner-outer-inner wall", - "reduce_crossing_wall": "1", + "renamed_from": "0.20mm Strength @EOS Giga 0.4 nozzle", + "inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle", + "from": "system", "setting_id": "JsDp89yLYQpZ8a9z", "instantiation": "true", - "renamed_from": "0.20mm Strength @EOS Giga 0.4 nozzle", + "wall_sequence": "inner-outer-inner wall", + "reduce_crossing_wall": "1", "wall_loops": "6" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json index c7df41ccde..5b76b8e465 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Draft @Elegoo Giga 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.24mm Draft @Elegoo Giga 0.4 nozzle", + "renamed_from": "0.24mm Draft @EOS Giga 0.4 nozzle", "inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "V1FtH3wGlPhP8SlR", "instantiation": "true", - "renamed_from": "0.24mm Draft @EOS Giga 0.4 nozzle", - "name": "0.24mm Draft @Elegoo Giga 0.4 nozzle" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json index 3c61774ab9..e1f16f497c 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Fine @Elegoo Giga 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.24mm Fine @Elegoo Giga 0.8 nozzle", + "renamed_from": "0.24mm Fine @EOS Giga 0.8 nozzle", "inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "v4n8azbYxr3XfTC1", "instantiation": "true", - "renamed_from": "0.24mm Fine @EOS Giga 0.8 nozzle", - "name": "0.24mm Fine @Elegoo Giga 0.8 nozzle" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json index 5c9783aca0..72b80ea0ab 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.24mm Optimal @Elegoo Giga 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.24mm Optimal @Elegoo Giga 0.6 nozzle", + "renamed_from": "0.24mm Optimal @EOS Giga 0.6 nozzle", "inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle", - "layer_height": "0.24", + "from": "system", "setting_id": "ZvTBY1VByXi0woy8", "instantiation": "true", - "renamed_from": "0.24mm Optimal @EOS Giga 0.6 nozzle", - "name": "0.24mm Optimal @Elegoo Giga 0.6 nozzle" + "layer_height": "0.24" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json index cfb1f6173b..afecee96d4 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.28mm Extra Draft @Elegoo Giga 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.28mm Extra Draft @Elegoo Giga 0.4 nozzle", + "renamed_from": "0.28mm Extra Draft @EOS Giga 0.4 nozzle", "inherits": "0.20mm Standard @Elegoo Giga 0.4 nozzle", - "layer_height": "0.28", + "from": "system", "setting_id": "fJFavkWAsAtwN4W2", "instantiation": "true", - "renamed_from": "0.28mm Extra Draft @EOS Giga 0.4 nozzle", - "name": "0.28mm Extra Draft @Elegoo Giga 0.4 nozzle" + "layer_height": "0.28" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Fine @Elegoo Giga 1.0 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Fine @Elegoo Giga 1.0 nozzle.json index 0d57c5f756..cf0bb205e7 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Fine @Elegoo Giga 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Fine @Elegoo Giga 1.0 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.30mm Fine @Elegoo Giga 1.0 nozzle", + "renamed_from": "0.30mm Fine @EOS Giga 1.0 nozzle", "inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle", - "layer_height": "0.3", + "from": "system", "setting_id": "fmE4BaIielLYEpAm", "instantiation": "true", - "renamed_from": "0.30mm Fine @EOS Giga 1.0 nozzle", - "name": "0.30mm Fine @Elegoo Giga 1.0 nozzle" + "layer_height": "0.3" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Strength @Elegoo Giga 0.6 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Strength @Elegoo Giga 0.6 nozzle.json index ce791916ca..46edb7aefa 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Strength @Elegoo Giga 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.30mm Strength @Elegoo Giga 0.6 nozzle.json @@ -1,12 +1,12 @@ { "type": "process", - "from": "system", - "inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle", "name": "0.30mm Strength @Elegoo Giga 0.6 nozzle", - "wall_sequence": "inner-outer-inner wall", - "reduce_crossing_wall": "1", + "renamed_from": "0.30mm Strength @EOS Giga 0.6 nozzle", + "inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle", + "from": "system", "setting_id": "Vwty88kyYO8bPt9l", "instantiation": "true", - "renamed_from": "0.30mm Strength @EOS Giga 0.6 nozzle", + "wall_sequence": "inner-outer-inner wall", + "reduce_crossing_wall": "1", "wall_loops": "5" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json index c859de87a7..be8908ca94 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.32mm Optimal @Elegoo Giga 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.32mm Optimal @Elegoo Giga 0.8 nozzle", + "renamed_from": "0.32mm Optimal @EOS Giga 0.8 nozzle", "inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle", - "layer_height": "0.32", + "from": "system", "setting_id": "U6XpRv8LUHeLMpO6", "instantiation": "true", - "renamed_from": "0.32mm Optimal @EOS Giga 0.8 nozzle", - "name": "0.32mm Optimal @Elegoo Giga 0.8 nozzle" + "layer_height": "0.32" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.36mm Draft @Elegoo Giga 0.6 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.36mm Draft @Elegoo Giga 0.6 nozzle.json index fa032fc410..f8f348841e 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.36mm Draft @Elegoo Giga 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.36mm Draft @Elegoo Giga 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.36mm Draft @Elegoo Giga 0.6 nozzle", + "renamed_from": "0.36mm Draft @EOS Giga 0.6 nozzle", "inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle", - "layer_height": "0.36", + "from": "system", "setting_id": "aFZ4bLGGhFIcwoH5", "instantiation": "true", - "renamed_from": "0.36mm Draft @EOS Giga 0.6 nozzle", - "name": "0.36mm Draft @Elegoo Giga 0.6 nozzle" + "layer_height": "0.36" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json index aa8af94e85..48ffeb9d06 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Optimal @Elegoo Giga 1.0 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.40mm Optimal @Elegoo Giga 1.0 nozzle", + "renamed_from": "0.40mm Optimal @EOS Giga 1.0 nozzle", "inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle", - "layer_height": "0.4", + "from": "system", "setting_id": "fGSfqfyNqMhuqZ8X", "instantiation": "true", - "renamed_from": "0.40mm Optimal @EOS Giga 1.0 nozzle", - "name": "0.40mm Optimal @Elegoo Giga 1.0 nozzle" + "layer_height": "0.4" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Standard @Elegoo Giga 0.8 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Standard @Elegoo Giga 0.8 nozzle.json index 8b73f6b7d1..10e4611bc4 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Standard @Elegoo Giga 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.40mm Standard @Elegoo Giga 0.8 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", "name": "0.40mm Standard @Elegoo Giga 0.8 nozzle", + "renamed_from": "0.40mm Standard @EOS Giga 0.8 nozzle", "inherits": "fdm_process_elegoo_08040", "from": "system", "setting_id": "oiMWJMGC2aW2v4wg", "instantiation": "true", - "renamed_from": "0.40mm Standard @EOS Giga 0.8 nozzle", "default_acceleration": "3000", "filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "initial_layer_acceleration": "1000", diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json index 803606068b..11004b57f4 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.42mm Extra Draft @Elegoo Giga 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.42mm Extra Draft @Elegoo Giga 0.6 nozzle", + "renamed_from": "0.42mm Extra Draft @EOS Giga 0.6 nozzle", "inherits": "0.30mm Standard @Elegoo Giga 0.6 nozzle", - "layer_height": "0.42", + "from": "system", "setting_id": "dlzWR8ZIwaJ1tYId", "instantiation": "true", - "renamed_from": "0.42mm Extra Draft @EOS Giga 0.6 nozzle", - "name": "0.42mm Extra Draft @Elegoo Giga 0.6 nozzle" + "layer_height": "0.42" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.48mm Draft @Elegoo Giga 0.8 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.48mm Draft @Elegoo Giga 0.8 nozzle.json index 3c660f5b8e..33163a00f1 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.48mm Draft @Elegoo Giga 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.48mm Draft @Elegoo Giga 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.48mm Draft @Elegoo Giga 0.8 nozzle", + "renamed_from": "0.48mm Draft @EOS Giga 0.8 nozzle", "inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle", - "layer_height": "0.48", + "from": "system", "setting_id": "lqJRn5QLgMp5i2dr", "instantiation": "true", - "renamed_from": "0.48mm Draft @EOS Giga 0.8 nozzle", - "name": "0.48mm Draft @Elegoo Giga 0.8 nozzle" + "layer_height": "0.48" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.50mm Standard @Elegoo Giga 1.0 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.50mm Standard @Elegoo Giga 1.0 nozzle.json index f2ad7bb95a..0252414921 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.50mm Standard @Elegoo Giga 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.50mm Standard @Elegoo Giga 1.0 nozzle.json @@ -1,11 +1,11 @@ { "type": "process", - "inherits": "fdm_process_elegoo_10050", "name": "0.50mm Standard @Elegoo Giga 1.0 nozzle", + "renamed_from": "0.50mm Standard @EOS Giga 1.0 nozzle", + "inherits": "fdm_process_elegoo_10050", "from": "system", "setting_id": "hLPWpsFCvKgbrebl", "instantiation": "true", - "renamed_from": "0.50mm Standard @EOS Giga 1.0 nozzle", "default_acceleration": "3000", "filename_format": "EOGiga1_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode", "initial_layer_acceleration": "1000", diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json index 8104d7423a..9a1b450a86 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.56mm Extra Draft @Elegoo Giga 0.8 nozzle.json @@ -1,9 +1,9 @@ { "type": "process", - "from": "system", - "inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle", - "setting_id": "EC6Dqk8dUIai51E5", - "instantiation": "true", + "name": "0.56mm Extra Draft @Elegoo Giga 0.8 nozzle", "renamed_from": "0.56mm Extra Draft @EOS Giga 0.8 nozzle", - "name": "0.56mm Extra Draft @Elegoo Giga 0.8 nozzle" + "inherits": "0.40mm Standard @Elegoo Giga 0.8 nozzle", + "from": "system", + "setting_id": "EC6Dqk8dUIai51E5", + "instantiation": "true" } diff --git a/resources/profiles/Elegoo/process/EOSGIGA/0.60mm Draft @Elegoo Giga 1.0 nozzle.json b/resources/profiles/Elegoo/process/EOSGIGA/0.60mm Draft @Elegoo Giga 1.0 nozzle.json index d53af64b0e..664dbdddea 100644 --- a/resources/profiles/Elegoo/process/EOSGIGA/0.60mm Draft @Elegoo Giga 1.0 nozzle.json +++ b/resources/profiles/Elegoo/process/EOSGIGA/0.60mm Draft @Elegoo Giga 1.0 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "from": "system", + "name": "0.60mm Draft @Elegoo Giga 1.0 nozzle", + "renamed_from": "0.60mm Draft @EOS Giga 1.0 nozzle", "inherits": "0.50mm Standard @Elegoo Giga 1.0 nozzle", - "layer_height": "0.6", + "from": "system", "setting_id": "VsOntugsCeEPNBvC", "instantiation": "true", - "renamed_from": "0.60mm Draft @EOS Giga 1.0 nozzle", - "name": "0.60mm Draft @Elegoo Giga 1.0 nozzle" + "layer_height": "0.6" } diff --git a/resources/profiles/Eryone.json b/resources/profiles/Eryone.json index 1ee1f88ed8..3a222c5404 100644 --- a/resources/profiles/Eryone.json +++ b/resources/profiles/Eryone.json @@ -1,6 +1,6 @@ { "name": "Eryone", - "version": "02.04.00.05", + "version": "02.04.00.07", "force_update": "0", "description": "Eryone configurations", "machine_model_list": [ @@ -432,10 +432,18 @@ "name": "Eryone ABS", "sub_path": "filament/Eryone ABS.json" }, + { + "name": "Eryone ABS+-HS @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone ABS+-HS @Thinker X400 0.4 nozzle.json" + }, { "name": "Eryone ABS-CF", "sub_path": "filament/Eryone ABS-CF.json" }, + { + "name": "Eryone ABS-GF @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone ABS-GF @Thinker X400 0.4 nozzle.json" + }, { "name": "Eryone ASA", "sub_path": "filament/Eryone ASA.json" @@ -444,6 +452,10 @@ "name": "Eryone ASA-CF", "sub_path": "filament/Eryone ASA-CF.json" }, + { + "name": "Eryone ASA-HS @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone ASA-HS @Thinker X400 0.4 nozzle.json" + }, { "name": "Eryone PA", "sub_path": "filament/Eryone PA.json" @@ -460,18 +472,50 @@ "name": "Eryone PETG", "sub_path": "filament/Eryone PETG.json" }, + { + "name": "Eryone PETG HS @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PETG HS @Thinker X400 0.4 nozzle.json" + }, { "name": "Eryone PETG-CF", "sub_path": "filament/Eryone PETG-CF.json" }, + { + "name": "Eryone PETG-GF @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PETG-GF @Thinker X400 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Lite @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PETG-Lite @Thinker X400 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Matte @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PETG-Matte @Thinker X400 0.4 nozzle.json" + }, + { + "name": "Eryone PETG-Translucent @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PETG-Translucent @Thinker X400 0.4 nozzle.json" + }, { "name": "Eryone PLA", "sub_path": "filament/Eryone PLA.json" }, + { + "name": "Eryone PLA+HS @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PLA+HS @Thinker X400 0.4 nozzle.json" + }, { "name": "Eryone PLA-CF", "sub_path": "filament/Eryone PLA-CF.json" }, + { + "name": "Eryone PLA-Matte @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PLA-Matte @Thinker X400 0.4 nozzle.json" + }, + { + "name": "Eryone PLA-Matte HS @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone PLA-Matte HS @Thinker X400 0.4 nozzle.json" + }, { "name": "Eryone PP", "sub_path": "filament/Eryone PP.json" @@ -488,6 +532,14 @@ "name": "Eryone TPU", "sub_path": "filament/Eryone TPU.json" }, + { + "name": "Eryone petg-Galaxy @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone petg-Galaxy @Thinker X400 0.4 nozzle.json" + }, + { + "name": "Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle", + "sub_path": "filament/Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle.json" + }, { "name": "fdm_filament_pla", "sub_path": "filament/fdm_filament_pla.json" diff --git a/resources/profiles/Eryone/filament/Eryone ABS @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone ABS @0.2 nozzle.json index 11bd3c3c67..c178314b73 100644 --- a/resources/profiles/Eryone/filament/Eryone ABS @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone ABS @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone ABS @0.2 nozzle", + "inherits": "Eryone ABS", "from": "system", "setting_id": "sNet9szMIhVY4WoS", "instantiation": "true", - "inherits": "Eryone ABS", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone ABS+-HS @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone ABS+-HS @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..fb0f39861c --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone ABS+-HS @Thinker X400 0.4 nozzle.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Eryone ABS+-HS @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "aUH1I90BFXa0C84r", + "filament_id": "OFRgjTRp", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone ABS+-HS @Thinker X400 0.4 nozzle" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "25" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "ABS" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "255" + ], + "nozzle_temperature_initial_layer": [ + "255" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone ABS-CF @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone ABS-CF @0.2 nozzle.json index 0d862c72f6..c64db14844 100644 --- a/resources/profiles/Eryone/filament/Eryone ABS-CF @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone ABS-CF @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone ABS-CF @0.2 nozzle", + "inherits": "Eryone ABS-CF", "from": "system", "setting_id": "a7qk6VtkbJziQHZo", "instantiation": "true", - "inherits": "Eryone ABS-CF", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone ABS-GF @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone ABS-GF @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..f3ff63ea2d --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone ABS-GF @Thinker X400 0.4 nozzle.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Eryone ABS-GF @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "WnsZC7HYi5Z1MOcn", + "filament_id": "OFenMm2Y", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone ABS-GF @Thinker X400 0.4 nozzle" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "ABS" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone ASA @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone ASA @0.2 nozzle.json index fd8a747c60..090804de80 100644 --- a/resources/profiles/Eryone/filament/Eryone ASA @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone ASA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone ASA @0.2 nozzle", + "inherits": "Eryone ASA", "from": "system", "setting_id": "SopkMvsT3DXzJ9Ky", "instantiation": "true", - "inherits": "Eryone ASA", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone ASA-CF @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone ASA-CF @0.2 nozzle.json index 3e38a60b4f..a89631b5e0 100644 --- a/resources/profiles/Eryone/filament/Eryone ASA-CF @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone ASA-CF @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone ASA-CF @0.2 nozzle", + "inherits": "Eryone ASA-CF", "from": "system", "setting_id": "yBYSvDH0djt4S123", "instantiation": "true", - "inherits": "Eryone ASA-CF", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone ASA-HS @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone ASA-HS @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..40b5d6da1b --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone ASA-HS @Thinker X400 0.4 nozzle.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Eryone ASA-HS @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "xw8zqUsFb2WVaSo1", + "filament_id": "OFIzY5sP", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone ASA-HS @Thinker X400 0.4 nozzle" + ], + "fan_max_speed": [ + "20" + ], + "fan_min_speed": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "ASA" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PA @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PA @0.2 nozzle.json index f8ee131756..36af337c35 100644 --- a/resources/profiles/Eryone/filament/Eryone PA @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PA @0.2 nozzle", + "inherits": "Eryone PA", "from": "system", "setting_id": "zavqdFwS2fsajkps", "instantiation": "true", - "inherits": "Eryone PA", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PA-CF @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PA-CF @0.2 nozzle.json index bb0b1ecba2..006ac2d6d7 100644 --- a/resources/profiles/Eryone/filament/Eryone PA-CF @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PA-CF @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PA-CF @0.2 nozzle", + "inherits": "Eryone PA-CF", "from": "system", "setting_id": "wbnmjqeccJS209GO", "instantiation": "true", - "inherits": "Eryone PA-CF", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PA-GF @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PA-GF @0.2 nozzle.json index 14c8620f6a..d161e2ca89 100644 --- a/resources/profiles/Eryone/filament/Eryone PA-GF @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PA-GF @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PA-GF @0.2 nozzle", + "inherits": "Eryone PA-GF", "from": "system", "setting_id": "J7Oy1mm1szLspwBb", "instantiation": "true", - "inherits": "Eryone PA-GF", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PETG @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PETG @0.2 nozzle.json index e8ddc59440..d3e8c6b1e2 100644 --- a/resources/profiles/Eryone/filament/Eryone PETG @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PETG @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PETG @0.2 nozzle", + "inherits": "Eryone PETG", "from": "system", "setting_id": "cATziDM4CjP6MiC4", "instantiation": "true", - "inherits": "Eryone PETG", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PETG HS @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PETG HS @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..d0716a6d94 --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PETG HS @Thinker X400 0.4 nozzle.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Eryone PETG HS @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "GtPiiNgHAnxrR9Tj", + "filament_id": "OFtqfvcE", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PETG HS @Thinker X400 0.4 nozzle" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "PETG" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PETG-CF @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PETG-CF @0.2 nozzle.json index 3bb3f6f1df..84f3ac67a1 100644 --- a/resources/profiles/Eryone/filament/Eryone PETG-CF @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PETG-CF @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PETG-CF @0.2 nozzle", + "inherits": "Eryone PETG-CF", "from": "system", "setting_id": "wsR57UlUrO2aW2Lc", "instantiation": "true", - "inherits": "Eryone PETG-CF", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PETG-CF.json b/resources/profiles/Eryone/filament/Eryone PETG-CF.json index 3dc02ddf00..c0823b73fe 100644 --- a/resources/profiles/Eryone/filament/Eryone PETG-CF.json +++ b/resources/profiles/Eryone/filament/Eryone PETG-CF.json @@ -40,7 +40,7 @@ "14" ], "filament_settings_id": [ - "Eryone PETG" + "Eryone PETG-CF" ], "filament_type": [ "PETG-CF" diff --git a/resources/profiles/Eryone/filament/Eryone PETG-GF @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PETG-GF @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..0bdb2eacd3 --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PETG-GF @Thinker X400 0.4 nozzle.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Eryone PETG-GF @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "S1FBfw93PzYJMhCa", + "filament_id": "OFbzOkXX", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PETG-GF @Thinker X400 0.4 nozzle" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "PETG" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PETG-Lite @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PETG-Lite @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..d23aeae081 --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PETG-Lite @Thinker X400 0.4 nozzle.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Eryone PETG-Lite @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "CWHhUswq3j9XHAuC", + "filament_id": "OFyWb8AA", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PETG-Lite @Thinker X400 0.4 nozzle" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.9796" + ], + "filament_max_volumetric_speed": [ + "13" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "PETG" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PETG-Matte @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PETG-Matte @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..5d7793b549 --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PETG-Matte @Thinker X400 0.4 nozzle.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Eryone PETG-Matte @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "pzceBG5k2u3X9TLO", + "filament_id": "OFSvr7Aj", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PETG-Matte @Thinker X400 0.4 nozzle" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "PETG" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PETG-Translucent @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PETG-Translucent @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..f195328495 --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PETG-Translucent @Thinker X400 0.4 nozzle.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Eryone PETG-Translucent @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "jN64L5SUnQB5dG1x", + "filament_id": "OFY2E8cd", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PETG-Translucent @Thinker X400 0.4 nozzle" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "PETG" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PLA @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PLA @0.2 nozzle.json index 204bb5e32e..d28cd2146c 100644 --- a/resources/profiles/Eryone/filament/Eryone PLA @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PLA @0.2 nozzle", + "inherits": "Eryone PLA", "from": "system", "setting_id": "kJhDYIHtXhAd4M6v", "instantiation": "true", - "inherits": "Eryone PLA", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PLA+HS @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PLA+HS @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..13708aa4c4 --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PLA+HS @Thinker X400 0.4 nozzle.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Eryone PLA+HS @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "AfUEns6VhCXsj9Ft", + "filament_id": "OFeRoHy3", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PLA+HS @Thinker X400 0.4 nozzle" + ], + "fan_min_speed": [ + "80" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PLA-CF @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PLA-CF @0.2 nozzle.json index 9d43ea33e3..953392e263 100644 --- a/resources/profiles/Eryone/filament/Eryone PLA-CF @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PLA-CF @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PLA-CF @0.2 nozzle", + "inherits": "Eryone PLA-CF", "from": "system", "setting_id": "ghNuMkVp1164Fw1Z", "instantiation": "true", - "inherits": "Eryone PLA-CF", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PLA-Matte @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PLA-Matte @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..f4d0667f5f --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PLA-Matte @Thinker X400 0.4 nozzle.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Eryone PLA-Matte @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "Ho1nQYsweqTTte0g", + "filament_id": "OFFMWFWL", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PLA-Matte @Thinker X400 0.4 nozzle" + ], + "fan_min_speed": [ + "80" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.99" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PLA-Matte HS @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone PLA-Matte HS @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..4a705e04bd --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone PLA-Matte HS @Thinker X400 0.4 nozzle.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Eryone PLA-Matte HS @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "8W0yhuRu7OBJkSOS", + "filament_id": "OF9mNFSM", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone PLA-Matte HS @Thinker X400 0.4 nozzle" + ], + "fan_min_speed": [ + "80" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "1.1" + ], + "filament_max_volumetric_speed": [ + "28" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone PP @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PP @0.2 nozzle.json index 47d0b9ec14..f6df74cfe5 100644 --- a/resources/profiles/Eryone/filament/Eryone PP @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PP @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PP @0.2 nozzle", + "inherits": "Eryone PP", "from": "system", "setting_id": "ePXvfc5tmC3GnZPe", "instantiation": "true", - "inherits": "Eryone PP", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone PP-CF @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone PP-CF @0.2 nozzle.json index 986696084e..2b8dab8617 100644 --- a/resources/profiles/Eryone/filament/Eryone PP-CF @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone PP-CF @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone PP-CF @0.2 nozzle", + "inherits": "Eryone PP-CF", "from": "system", "setting_id": "os5ZrNT1utAczy2F", "instantiation": "true", - "inherits": "Eryone PP-CF", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone Silk PLA @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone Silk PLA @0.2 nozzle.json index 1a617e7f14..bfa247ca71 100644 --- a/resources/profiles/Eryone/filament/Eryone Silk PLA @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone Silk PLA @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone Silk PLA @0.2 nozzle", + "inherits": "Eryone Silk PLA", "from": "system", "setting_id": "RS6yfcZ6PbJzGrUc", "instantiation": "true", - "inherits": "Eryone Silk PLA", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone TPU @0.2 nozzle.json b/resources/profiles/Eryone/filament/Eryone TPU @0.2 nozzle.json index 8596a81fb9..2116afac4b 100644 --- a/resources/profiles/Eryone/filament/Eryone TPU @0.2 nozzle.json +++ b/resources/profiles/Eryone/filament/Eryone TPU @0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "Eryone TPU @0.2 nozzle", + "inherits": "Eryone TPU", "from": "system", "setting_id": "6Le5wRz6cFfKcPaz", "instantiation": "true", - "inherits": "Eryone TPU", "compatible_printers": [ "Thinker X400 0.2 nozzle" ], diff --git a/resources/profiles/Eryone/filament/Eryone petg-Galaxy @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone petg-Galaxy @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..e0cbb34d8e --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone petg-Galaxy @Thinker X400 0.4 nozzle.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Eryone petg-Galaxy @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "R4BPYs8aAc9DFf0n", + "filament_id": "OFWDDu8u", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone petg-Galaxy @Thinker X400 0.4 nozzle" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "30" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "filament_type": [ + "PETG" + ], + "full_fan_speed_layer": [ + "2" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "245" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/filament/Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle.json b/resources/profiles/Eryone/filament/Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle.json new file mode 100644 index 0000000000..0801863e0e --- /dev/null +++ b/resources/profiles/Eryone/filament/Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle", + "inherits": "Eryone Standard PLA", + "from": "system", + "setting_id": "jCbto64oaAKrDaN0", + "filament_id": "OF99Cc22", + "instantiation": "true", + "compatible_printers": [ + "Thinker X400 0.4 nozzle" + ], + "filament_settings_id": [ + "Eryone pla-Ultra Silk @Thinker X400 0.4 nozzle" + ], + "fan_min_speed": [ + "80" + ], + "filament_end_gcode": [ + "; filament end gcode \nSET_FAN_SPEED FAN=filter_fan SPEED=0" + ], + "filament_flow_ratio": [ + "0.97" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_start_gcode": [ + "; filament start gcode\nSET_FAN_SPEED FAN=filter_fan SPEED=1" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "slow_down_layer_time": [ + "4" + ], + "slow_down_min_speed": [ + "15" + ] +} diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.2 nozzle.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.2 nozzle.json index 452efb7dba..133e2bd1e1 100644 --- a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.2 nozzle.json +++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.2 nozzle.json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.10mm Standard @Eryone ER20 0.2 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 0.2 nozzle", "inherits": "fdm_machine_eryone_ER20_common", + "from": "system", "setting_id": "mN66BkXzUCaGGkZ5", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.10mm Standard @Eryone ER20 0.2 nozzle", "max_layer_height": [ "0.14" ], "min_layer_height": [ "0.04" ], - "name": "Eryone ER20 0.2 nozzle", "nozzle_diameter": [ "0.2" ], "printer_model": "Eryone ER20", - "printer_variant": "0.2", - "type": "machine" + "printer_variant": "0.2" } diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.4 nozzle.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.4 nozzle.json index c9dd07d94e..b77a7fa400 100644 --- a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.4 nozzle.json +++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.4 nozzle.json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.20mm Standard @Eryone ER20", - "from": "system", + "type": "machine", + "name": "Eryone ER20 0.4 nozzle", "inherits": "fdm_machine_eryone_ER20_common", + "from": "system", "setting_id": "7Hs87Tz3oMj8YGLU", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.20mm Standard @Eryone ER20", "max_layer_height": [ "0.32" ], "min_layer_height": [ "0.08" ], - "name": "Eryone ER20 0.4 nozzle", "nozzle_diameter": [ "0.4" ], "printer_model": "Eryone ER20", - "printer_variant": "0.4", - "type": "machine" + "printer_variant": "0.4" } diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.5 nozzle.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.5 nozzle.json index 6565c58aa8..5ee3558c4d 100644 --- a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.5 nozzle.json +++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.5 nozzle.json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.25mm Standard @Eryone ER20 0.5 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 0.5 nozzle", "inherits": "fdm_machine_eryone_ER20_common", + "from": "system", "setting_id": "8AfjLDQQXEAnxuQ7", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.25mm Standard @Eryone ER20 0.5 nozzle", "max_layer_height": [ "0.38" ], "min_layer_height": [ "0.10" ], - "name": "Eryone ER20 0.5 nozzle", "nozzle_diameter": [ "0.5" ], "printer_model": "Eryone ER20", - "printer_variant": "0.5", - "type": "machine" + "printer_variant": "0.5" } diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.6 nozzle.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.6 nozzle.json index f090d44b6b..7940d962ea 100644 --- a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.6 nozzle.json +++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.6 nozzle.json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.30mm Standard @Eryone ER20 0.6 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 0.6 nozzle", "inherits": "fdm_machine_eryone_ER20_common", + "from": "system", "setting_id": "8USSZMCTCDoHK55n", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.30mm Standard @Eryone ER20 0.6 nozzle", "max_layer_height": [ "0.42" ], "min_layer_height": [ "0.12" ], - "name": "Eryone ER20 0.6 nozzle", "nozzle_diameter": [ "0.6" ], "printer_model": "Eryone ER20", - "printer_variant": "0.6", - "type": "machine" + "printer_variant": "0.6" } diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.8 nozzle.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.8 nozzle.json index d64321fabf..1e2ef0d4e4 100644 --- a/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.8 nozzle.json +++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20 0.8 nozzle.json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.40mm Standard @Eryone ER20 0.8 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 0.8 nozzle", "inherits": "fdm_machine_eryone_ER20_common", + "from": "system", "setting_id": "JWFQL6GvDRJk46i7", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.40mm Standard @Eryone ER20 0.8 nozzle", "max_layer_height": [ "0.56" ], "min_layer_height": [ "0.16" ], - "name": "Eryone ER20 0.8 nozzle", "nozzle_diameter": [ "0.8" ], "printer_model": "Eryone ER20", - "printer_variant": "0.8", - "type": "machine" + "printer_variant": "0.8" } diff --git a/resources/profiles/Eryone/machine/ER20/Eryone ER20.json b/resources/profiles/Eryone/machine/ER20/Eryone ER20.json index c555d904dc..f6c3f95c7e 100644 --- a/resources/profiles/Eryone/machine/ER20/Eryone ER20.json +++ b/resources/profiles/Eryone/machine/ER20/Eryone ER20.json @@ -1,4 +1,6 @@ { + "type": "machine_model", + "name": "Eryone ER20", "bed_model": "eryone_er20_buildplate_model.stl", "bed_texture": "Eryone ER20_texture.svg", "family": "Eryone", @@ -6,7 +8,5 @@ "machine_tech": "FFF", "model_id": "Eryone ER20", "default_materials": "Generic PLA @System", - "name": "Eryone ER20", - "nozzle_diameter": "0.4;0.2;0.5;0.6;0.8", - "type": "machine_model" + "nozzle_diameter": "0.4;0.2;0.5;0.6;0.8" } diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.2 nozzle .json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.2 nozzle .json index fe19a23635..901e256a50 100644 --- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.2 nozzle .json +++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.2 nozzle .json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.10mm Standard @Eryone ER20 Klipper 0.2 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 Klipper 0.2 nozzle", "inherits": "fdm_machine_eryone_ER20_Klipper_common", + "from": "system", "setting_id": "dUHn8STOXHOXD63f", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.10mm Standard @Eryone ER20 Klipper 0.2 nozzle", "max_layer_height": [ "0.14" ], "min_layer_height": [ "0.04" ], - "name": "Eryone ER20 Klipper 0.2 nozzle", "nozzle_diameter": [ "0.2" ], "printer_model": "Eryone ER20 Klipper", - "printer_variant": "0.2", - "type": "machine" + "printer_variant": "0.2" } diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.4 nozzle .json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.4 nozzle .json index 5a95f35977..d206af00a6 100644 --- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.4 nozzle .json +++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.4 nozzle .json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.20mm Standard @Eryone ER20 Klipper", - "from": "system", + "type": "machine", + "name": "Eryone ER20 Klipper 0.4 nozzle", "inherits": "fdm_machine_eryone_ER20_Klipper_common", + "from": "system", "setting_id": "xp3wEd41u0J6bR65", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.20mm Standard @Eryone ER20 Klipper", "max_layer_height": [ "0.32" ], "min_layer_height": [ "0.08" ], - "name": "Eryone ER20 Klipper 0.4 nozzle", "nozzle_diameter": [ "0.4" ], "printer_model": "Eryone ER20 Klipper", - "printer_variant": "0.4", - "type": "machine" + "printer_variant": "0.4" } diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.5 nozzle .json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.5 nozzle .json index 1f97d64742..24b4bdcbbb 100644 --- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.5 nozzle .json +++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.5 nozzle .json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 Klipper 0.5 nozzle", "inherits": "fdm_machine_eryone_ER20_Klipper_common", + "from": "system", "setting_id": "5zuzTKyILhVSA5J5", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle", "max_layer_height": [ "0.38" ], "min_layer_height": [ "0.10" ], - "name": "Eryone ER20 Klipper 0.5 nozzle", "nozzle_diameter": [ "0.5" ], "printer_model": "Eryone ER20 Klipper", - "printer_variant": "0.5", - "type": "machine" + "printer_variant": "0.5" } diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.6 nozzle .json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.6 nozzle .json index b9f675ea43..09abdb4adf 100644 --- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.6 nozzle .json +++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.6 nozzle .json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 Klipper 0.6 nozzle", "inherits": "fdm_machine_eryone_ER20_Klipper_common", + "from": "system", "setting_id": "LCVtRqmtH6YySurQ", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle", "max_layer_height": [ "0.42" ], "min_layer_height": [ "0.12" ], - "name": "Eryone ER20 Klipper 0.6 nozzle", "nozzle_diameter": [ "0.6" ], "printer_model": "Eryone ER20 Klipper", - "printer_variant": "0.6", - "type": "machine" + "printer_variant": "0.6" } diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.8 nozzle .json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.8 nozzle .json index 558a442e30..3f09c89052 100644 --- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.8 nozzle .json +++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper 0.8 nozzle .json @@ -1,21 +1,21 @@ { - "default_filament_profile": [], - "default_print_profile": "0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle", - "from": "system", + "type": "machine", + "name": "Eryone ER20 Klipper 0.8 nozzle", "inherits": "fdm_machine_eryone_ER20_Klipper_common", + "from": "system", "setting_id": "eMvz9rZXfWxXvuva", "instantiation": "true", + "default_filament_profile": [], + "default_print_profile": "0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle", "max_layer_height": [ "0.56" ], "min_layer_height": [ "0.16" ], - "name": "Eryone ER20 Klipper 0.8 nozzle", "nozzle_diameter": [ "0.8" ], "printer_model": "Eryone ER20 Klipper", - "printer_variant": "0.8", - "type": "machine" + "printer_variant": "0.8" } diff --git a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json index 11d48a7859..edf488dfc9 100644 --- a/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/machine/ER20_Klipper/Eryone ER20 Klipper.json @@ -1,4 +1,6 @@ { + "type": "machine_model", + "name": "Eryone ER20 Klipper", "bed_model": "eryone_er20_buildplate_model.stl", "bed_texture": "Eryone ER20_texture.svg", "default_bed_type": "Textured PEI Plate", @@ -7,8 +9,6 @@ "machine_tech": "FFF", "model_id": "Eryone ER20 Klipper", "default_materials": "Generic PLA @System", - "name": "Eryone ER20 Klipper", "nozzle_diameter": "0.4;0.2;0.5;0.6;0.8", - "type": "machine_model", "desciption": "optimized Eryone ER20 Klipper configuration with E3D Hotend, BMG directdrive, printable height limited to 200 because of the directdrive and Z-Sync mod" } diff --git a/resources/profiles/Eryone/machine/Thinker X400 0.2 nozzle.json b/resources/profiles/Eryone/machine/Thinker X400 0.2 nozzle.json index da3983130a..da328b97ec 100644 --- a/resources/profiles/Eryone/machine/Thinker X400 0.2 nozzle.json +++ b/resources/profiles/Eryone/machine/Thinker X400 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "machine", - "from": "system", "name": "Thinker X400 0.2 nozzle", "inherits": "Thinker X400 0.4 nozzle", + "from": "system", "setting_id": "hMvy9QaXQyM7tGke", "instantiation": "true", "printer_model": "Thinker X400", diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.12mm Draft @Eryone ER20 0.2 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.12mm Draft @Eryone ER20 0.2 nozzle.json index f17dc797a8..d811c3cd92 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.12mm Draft @Eryone ER20 0.2 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.12mm Draft @Eryone ER20 0.2 nozzle.json @@ -1,13 +1,13 @@ { + "type": "process", + "name": "0.12mm Draft @Eryone ER20 0.2 nozzle", + "inherits": "fdm_process_ER20_0.12_nozzle_0.2", + "from": "system", + "setting_id": "X5RY5e2qDLLXRw73", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.2 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.12_nozzle_0.2", - "setting_id": "X5RY5e2qDLLXRw73", - "instantiation": "true", - "name": "0.12mm Draft @Eryone ER20 0.2 nozzle", - "sparse_infill_pattern": "gyroid", - "type": "process" + "sparse_infill_pattern": "gyroid" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.14mm Extra Draft @Eryone ER20 0.2 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.14mm Extra Draft @Eryone ER20 0.2 nozzle.json index 7cc56e1902..dda0835710 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.14mm Extra Draft @Eryone ER20 0.2 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.14mm Extra Draft @Eryone ER20 0.2 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.14mm Extra Draft @Eryone ER20 0.2 nozzle", + "inherits": "fdm_process_ER20_0.14_nozzle_0.2", + "from": "system", + "setting_id": "USrHobTi6gZB0qfs", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.2 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.14_nozzle_0.2", - "setting_id": "USrHobTi6gZB0qfs", - "instantiation": "true", - "name": "0.14mm Extra Draft @Eryone ER20 0.2 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.15mm Optimal @Eryone ER20 0.5 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.15mm Optimal @Eryone ER20 0.5 nozzle.json index c552b7ec31..b294de444d 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.15mm Optimal @Eryone ER20 0.5 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.15mm Optimal @Eryone ER20 0.5 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.15mm Optimal @Eryone ER20 0.5 nozzle", + "inherits": "fdm_process_ER20_0.15_nozzle_0.5", + "from": "system", + "setting_id": "oapNf4dk0MGlHc1t", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.5 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.15_nozzle_0.5", - "setting_id": "oapNf4dk0MGlHc1t", - "instantiation": "true", - "name": "0.15mm Optimal @Eryone ER20 0.5 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.18mm Fine @Eryone ER20 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.18mm Fine @Eryone ER20 0.6 nozzle.json index c7078cfba4..919f30c69d 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.18mm Fine @Eryone ER20 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.18mm Fine @Eryone ER20 0.6 nozzle.json @@ -1,11 +1,11 @@ { - "compatible_printers": [ - "Eryone ER20 0.6 nozzle" - ], - "from": "system", + "type": "process", + "name": "0.18mm Fine @Eryone ER20 0.6 nozzle", "inherits": "fdm_process_ER20_0.18_nozzle_0.6", + "from": "system", "setting_id": "XnzfgUygXaUCzqsa", "instantiation": "true", - "name": "0.18mm Fine @Eryone ER20 0.6 nozzle", - "type": "process" + "compatible_printers": [ + "Eryone ER20 0.6 nozzle" + ] } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.20mm Standard @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.20mm Standard @Eryone ER20.json index 2e223dab0c..bd50b52efa 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.20mm Standard @Eryone ER20.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.20mm Standard @Eryone ER20.json @@ -1,13 +1,13 @@ { + "type": "process", + "name": "0.20mm Standard @Eryone ER20", + "inherits": "fdm_process_ER20_0.20", + "from": "system", + "setting_id": "TMsKM3bODapym77c", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.4 nozzle" ], - "from": "system", - "inherits": "fdm_process_ER20_0.20", - "setting_id": "TMsKM3bODapym77c", - "instantiation": "true", "layer_height": "0.20", - "name": "0.20mm Standard @Eryone ER20", - "notes": "", - "type": "process" + "notes": "" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.20mm Strength @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.20mm Strength @Eryone ER20.json index 0ce68ee027..ff47769d19 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.20mm Strength @Eryone ER20.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.20mm Strength @Eryone ER20.json @@ -1,14 +1,14 @@ { + "type": "process", + "name": "0.20mm Strength @Eryone ER20", + "inherits": "fdm_process_ER20_0.20", + "from": "system", + "setting_id": "GFfpctaMRI4Nuqk9", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.4 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.20", - "setting_id": "GFfpctaMRI4Nuqk9", - "instantiation": "true", - "name": "0.20mm Strength @Eryone ER20", "sparse_infill_density": "25%", - "type": "process", "wall_loops": "6" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.24mm Draft @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.24mm Draft @Eryone ER20.json index 339736d0b1..bb25e98ead 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.24mm Draft @Eryone ER20.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.24mm Draft @Eryone ER20.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.24mm Draft @Eryone ER20", + "inherits": "fdm_process_ER20_0.24", + "from": "system", + "setting_id": "8rfQRPMh82vmdDeb", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.4 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.24", - "setting_id": "8rfQRPMh82vmdDeb", - "instantiation": "true", - "name": "0.24mm Draft @Eryone ER20", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.24mm Fine @Eryone ER20 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.24mm Fine @Eryone ER20 0.8 nozzle.json index 44d7d8e926..e82e27216d 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.24mm Fine @Eryone ER20 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.24mm Fine @Eryone ER20 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.24mm Fine @Eryone ER20 0.8 nozzle", + "inherits": "fdm_process_ER20_0.24_nozzle_0.8", + "from": "system", + "setting_id": "0Ham5AnvDEnEzaSY", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.24_nozzle_0.8", - "setting_id": "0Ham5AnvDEnEzaSY", - "instantiation": "true", - "name": "0.24mm Fine @Eryone ER20 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.24mm Optimal @Eryone ER20 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.24mm Optimal @Eryone ER20 0.6 nozzle.json index 7fea46be58..fcf464d07a 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.24mm Optimal @Eryone ER20 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.24mm Optimal @Eryone ER20 0.6 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.24mm Optimal @Eryone ER20 0.6 nozzle", + "inherits": "fdm_process_ER20_0.24_nozzle_0.6", + "from": "system", + "setting_id": "0CRLvmSKxkmglWRi", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.6 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.24_nozzle_0.6", - "setting_id": "0CRLvmSKxkmglWRi", - "instantiation": "true", - "name": "0.24mm Optimal @Eryone ER20 0.6 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.25mm Standard @Eryone ER20 0.5 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.25mm Standard @Eryone ER20 0.5 nozzle.json index e1a26f1715..8dbe018f32 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.25mm Standard @Eryone ER20 0.5 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.25mm Standard @Eryone ER20 0.5 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.25mm Standard @Eryone ER20 0.5 nozzle", + "inherits": "fdm_process_ER20_0.25_nozzle_0.5", + "from": "system", + "setting_id": "oEjMrkTjRF6zL46C", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.5 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.25_nozzle_0.5", - "setting_id": "oEjMrkTjRF6zL46C", - "instantiation": "true", - "name": "0.25mm Standard @Eryone ER20 0.5 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.28mm Extra Draft @Eryone ER20.json b/resources/profiles/Eryone/process/eryone_ER20/0.28mm Extra Draft @Eryone ER20.json index 8a63db28a4..0afdb08dbb 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.28mm Extra Draft @Eryone ER20.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.28mm Extra Draft @Eryone ER20.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.28mm Extra Draft @Eryone ER20", + "inherits": "fdm_process_ER20_0.28", + "from": "system", + "setting_id": "oyoecLMFQzjbIfcd", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.4 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.28", - "setting_id": "oyoecLMFQzjbIfcd", - "instantiation": "true", - "name": "0.28mm Extra Draft @Eryone ER20", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.30mm Standard @Eryone ER20 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.30mm Standard @Eryone ER20 0.6 nozzle.json index f928604605..67288717e1 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.30mm Standard @Eryone ER20 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.30mm Standard @Eryone ER20 0.6 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.30mm Standard @Eryone ER20 0.6 nozzle", + "inherits": "fdm_process_ER20_0.30_nozzle_0.6", + "from": "system", + "setting_id": "jw5QUhazCifzzM6Q", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.6 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.30_nozzle_0.6", - "setting_id": "jw5QUhazCifzzM6Q", - "instantiation": "true", - "name": "0.30mm Standard @Eryone ER20 0.6 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.30mm Strength @Eryone ER20 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.30mm Strength @Eryone ER20 0.6 nozzle.json index 42a56dafef..0467be8ba4 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.30mm Strength @Eryone ER20 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.30mm Strength @Eryone ER20 0.6 nozzle.json @@ -1,14 +1,14 @@ { + "type": "process", + "name": "0.30mm Strength @Eryone ER20 0.6 nozzle", + "inherits": "fdm_process_ER20_0.30_nozzle_0.6", + "from": "system", + "setting_id": "LqOFomJiS10Vbrdp", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.6 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.30_nozzle_0.6", - "setting_id": "LqOFomJiS10Vbrdp", - "instantiation": "true", - "name": "0.30mm Strength @Eryone ER20 0.6 nozzle", "sparse_infill_density": "25%", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.32mm Optimal @Eryone ER20 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.32mm Optimal @Eryone ER20 0.8 nozzle.json index 8c1ff89a9c..5171631cfa 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.32mm Optimal @Eryone ER20 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.32mm Optimal @Eryone ER20 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.32mm Optimal @Eryone ER20 0.8 nozzle", + "inherits": "fdm_process_ER20_0.32_nozzle_0.8", + "from": "system", + "setting_id": "5lYVYrlEfVVl2n0F", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.32_nozzle_0.8", - "setting_id": "5lYVYrlEfVVl2n0F", - "instantiation": "true", - "name": "0.32mm Optimal @Eryone ER20 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.36mm Draft @Eryone ER20 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.36mm Draft @Eryone ER20 0.6 nozzle.json index e673f0b293..da668817ab 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.36mm Draft @Eryone ER20 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.36mm Draft @Eryone ER20 0.6 nozzle.json @@ -1,13 +1,13 @@ { + "type": "process", + "name": "0.36mm Draft @Eryone ER20 0.6 nozzle", + "inherits": "fdm_process_ER20_0.36_nozzle_0.6", + "from": "system", + "setting_id": "vavNueSF5zRpUlTZ", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.6 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.36_nozzle_0.6", - "setting_id": "vavNueSF5zRpUlTZ", - "instantiation": "true", - "name": "0.36mm Draft @Eryone ER20 0.6 nozzle", - "travel_speed": "250", - "type": "process" + "travel_speed": "250" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.40mm Standard @Eryone ER20 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.40mm Standard @Eryone ER20 0.8 nozzle.json index 053d009d36..6ee5f62a08 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.40mm Standard @Eryone ER20 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.40mm Standard @Eryone ER20 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.40mm Standard @Eryone ER20 0.8 nozzle", + "inherits": "fdm_process_ER20_0.40_nozzle_0.8", + "from": "system", + "setting_id": "TlCbtZYdCRCkpIf6", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.40_nozzle_0.8", - "setting_id": "TlCbtZYdCRCkpIf6", - "instantiation": "true", - "name": "0.40mm Standard @Eryone ER20 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.42mm Extra Draft @Eryone ER20 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.42mm Extra Draft @Eryone ER20 0.6 nozzle.json index b6c8cd4dbb..13bdd2a5fb 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.42mm Extra Draft @Eryone ER20 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.42mm Extra Draft @Eryone ER20 0.6 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.42mm Extra Draft @Eryone ER20 0.6 nozzle", + "inherits": "fdm_process_ER20_0.42_nozzle_0.6", + "from": "system", + "setting_id": "q6PozBOTtWU7CMb0", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.6 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.42_nozzle_0.6", - "setting_id": "q6PozBOTtWU7CMb0", - "instantiation": "true", - "name": "0.42mm Extra Draft @Eryone ER20 0.6 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.48mm Draft @Eryone ER20 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.48mm Draft @Eryone ER20 0.8 nozzle.json index b4b2bed4e5..a45b4c05b2 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.48mm Draft @Eryone ER20 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.48mm Draft @Eryone ER20 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.48mm Draft @Eryone ER20 0.8 nozzle", + "inherits": "fdm_process_ER20_0.48_nozzle_0.8", + "from": "system", + "setting_id": "O3BhYAmUROrYm64x", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.48_nozzle_0.8", - "setting_id": "O3BhYAmUROrYm64x", - "instantiation": "true", - "name": "0.48mm Draft @Eryone ER20 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/0.56mm Extra Draft @Eryone ER20 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20/0.56mm Extra Draft @Eryone ER20 0.8 nozzle.json index df15e8722f..c500f00896 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/0.56mm Extra Draft @Eryone ER20 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20/0.56mm Extra Draft @Eryone ER20 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.56mm Extra Draft @Eryone ER20 0.8 nozzle", + "inherits": "fdm_process_ER20_0.56_nozzle_0.8", + "from": "system", + "setting_id": "RCycTBzuArwmwrj1", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_0.56_nozzle_0.8", - "setting_id": "RCycTBzuArwmwrj1", - "instantiation": "true", - "name": "0.56mm Extra Draft @Eryone ER20 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.06_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.06_nozzle_0.2.json index aeb0a8babe..25626784f6 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.06_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.06_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_0.06_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.06", "line_width": "0.22", - "name": "fdm_process_ER20_0.06_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.06", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.06", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.08_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.08_nozzle_0.2.json index 298bae6b03..cba1685f01 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.08_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.08_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_0.08_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.08", "line_width": "0.22", - "name": "fdm_process_ER20_0.08_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.08", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.08", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.10_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.10_nozzle_0.2.json index e25994edf5..fc5d14a763 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.10_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.10_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_0.10_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.1", "line_width": "0.22", - "name": "fdm_process_ER20_0.10_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.1", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.1", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12.json index 47dab55b11..2fd68b2f50 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12.json @@ -1,12 +1,13 @@ { + "type": "process", + "name": "fdm_process_ER20_0.12", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", - "instantiation": "false", "layer_height": "0.12", - "name": "fdm_process_ER20_0.12", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", @@ -14,6 +15,5 @@ "support_threshold_angle": "25", "support_top_z_distance": "0.16", "top_shell_layers": "5", - "top_shell_thickness": "0.6", - "type": "process" + "top_shell_thickness": "0.6" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12_nozzle_0.2.json index f365127bd8..a850e4d244 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.12_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_0.12_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.12", "line_width": "0.22", - "name": "fdm_process_ER20_0.12_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.12", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.12", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.14_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.14_nozzle_0.2.json index 36bddbb8c1..01d0d03b70 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.14_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.14_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_0.14_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.14", "line_width": "0.22", - "name": "fdm_process_ER20_0.14_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.14", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.14", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.15_nozzle_0.5.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.15_nozzle_0.5.json index c1b87f3c79..1ac3e109d2 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.15_nozzle_0.5.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.15_nozzle_0.5.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_0.15_nozzle_0.5", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", "initial_layer_line_width": "0.52", "inner_wall_line_width": "0.55", - "instantiation": "false", "internal_solid_infill_line_width": "0.55", "ironing_inset": "0.21", "layer_height": "0.15", "line_width": "0.52", - "name": "fdm_process_ER20_0.15_nozzle_0.5", "outer_wall_line_width": "0.52", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", @@ -22,6 +23,5 @@ "support_top_z_distance": "0.15", "top_shell_layers": "6", "top_shell_thickness": "0", - "top_surface_line_width": "0.52", - "type": "process" + "top_surface_line_width": "0.52" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.16.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.16.json index 4ccdbd7f5d..559dd8a177 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.16.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.16.json @@ -1,18 +1,18 @@ { + "type": "process", + "name": "fdm_process_ER20_0.16", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "bottom_shell_layers": "5", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", - "instantiation": "false", "layer_height": "0.16", - "name": "fdm_process_ER20_0.16", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "support_bottom_z_distance": "0.16", "support_top_z_distance": "0.16", "top_shell_layers": "6", - "top_shell_thickness": "0", - "type": "process" + "top_shell_thickness": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.18_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.18_nozzle_0.6.json index e0898428f9..806ecfd94b 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.18_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.18_nozzle_0.6.json @@ -1,22 +1,22 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.18_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.18", "line_width": "0.62", - "name": "fdm_process_ER20_0.18_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_bottom_z_distance": "0.18", "support_line_width": "0.62", "support_top_z_distance": "0.18", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.20.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.20.json index d19ce1d6b5..db95834983 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.20.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.20.json @@ -1,18 +1,18 @@ { + "type": "process", + "name": "fdm_process_ER20_0.20", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "bottom_shell_layers": "5", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", - "instantiation": "false", "layer_height": "0.20", - "name": "fdm_process_ER20_0.20", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "support_bottom_z_distance": "0.16", "support_top_z_distance": "0.16", "top_shell_layers": "5", - "top_shell_thickness": "0", - "type": "process" + "top_shell_thickness": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24.json index a7123ed6e4..ea72c8881c 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24.json @@ -1,16 +1,16 @@ { + "type": "process", + "name": "fdm_process_ER20_0.24", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", - "instantiation": "false", "layer_height": "0.24", - "name": "fdm_process_ER20_0.24", "support_bottom_z_distance": "0.16", "support_top_z_distance": "0.16", "support_threshold_angle": "35", "top_shell_layers": "5", "top_shell_thickness": "0", - "top_surface_line_width": "0.45", - "type": "process" + "top_surface_line_width": "0.45" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.6.json index 1532096134..86ba72d2f1 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.24_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.24", "line_width": "0.62", - "name": "fdm_process_ER20_0.24_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.8.json index 2a6ffbb9f5..6d6a928541 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.24_nozzle_0.8.json @@ -1,21 +1,21 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.24_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.24", "line_width": "0.82", - "name": "fdm_process_ER20_0.24_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "type": "process" + "top_surface_line_width": "0.82" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.25_nozzle_0.5.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.25_nozzle_0.5.json index ecffb4877c..38003a9df9 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.25_nozzle_0.5.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.25_nozzle_0.5.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.25_nozzle_0.5", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.55", "initial_layer_print_height": "0.2", "inner_wall_line_width": "0.55", - "instantiation": "false", "internal_solid_infill_line_width": "0.55", "ironing_inset": "0.21", "layer_height": "0.25", "line_width": "0.55", - "name": "fdm_process_ER20_0.25_nozzle_0.5", "outer_wall_line_width": "0.55", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.55", "support_line_width": "0.55", - "top_surface_line_width": "0.55", - "type": "process" + "top_surface_line_width": "0.55" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.28.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.28.json index d75e311f29..ba913a409f 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.28.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.28.json @@ -1,16 +1,16 @@ { + "type": "process", + "name": "fdm_process_ER20_0.28", + "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_common", - "instantiation": "false", "layer_height": "0.28", - "name": "fdm_process_ER20_0.28", "support_bottom_z_distance": "0.16", "support_threshold_angle": "40", "support_top_z_distance": "0.16", "top_shell_layers": "4", "top_shell_thickness": "0", - "top_surface_line_width": "0.45", - "type": "process" + "top_surface_line_width": "0.45" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.30_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.30_nozzle_0.6.json index 906493c26d..91de6302d0 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.30_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.30_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.30_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.3", "line_width": "0.62", - "name": "fdm_process_ER20_0.30_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.32_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.32_nozzle_0.8.json index 3a41303514..70ba0bd138 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.32_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.32_nozzle_0.8.json @@ -1,21 +1,21 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.32_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.32", "line_width": "0.82", - "name": "fdm_process_ER20_0.32_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "type": "process" + "top_surface_line_width": "0.82" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.36_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.36_nozzle_0.6.json index b204326637..b20f77d447 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.36_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.36_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.36_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.36", "line_width": "0.62", - "name": "fdm_process_ER20_0.36_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.40_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.40_nozzle_0.8.json index a12fe0e287..4b96ae9173 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.40_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.40_nozzle_0.8.json @@ -1,21 +1,21 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.40_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.4", "line_width": "0.82", - "name": "fdm_process_ER20_0.40_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "type": "process" + "top_surface_line_width": "0.82" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.42_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.42_nozzle_0.6.json index 5663b993b7..25f8762e55 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.42_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.42_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.42_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.42", "line_width": "0.62", - "name": "fdm_process_ER20_0.42_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.48_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.48_nozzle_0.8.json index c5a3bca18c..603758c587 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.48_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.48_nozzle_0.8.json @@ -1,21 +1,21 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.48_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.48", "line_width": "0.82", - "name": "fdm_process_ER20_0.48_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "type": "process" + "top_surface_line_width": "0.82" } diff --git a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.56_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.56_nozzle_0.8.json index 28c4e47272..eecb35736f 100644 --- a/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.56_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20/fdm_process_ER20_0.56_nozzle_0.8.json @@ -1,22 +1,22 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_0.56_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.56", "line_width": "0.82", - "name": "fdm_process_ER20_0.56_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "type": "process" + "top_surface_pattern": "monotonic" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm Draft @Eryone ER20 Klipper 0.2 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm Draft @Eryone ER20 Klipper 0.2 nozzle.json index 1ea915ac25..bb24e38c8b 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm Draft @Eryone ER20 Klipper 0.2 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.12mm Draft @Eryone ER20 Klipper 0.2 nozzle.json @@ -1,13 +1,13 @@ { + "type": "process", + "name": "0.12mm Draft @Eryone ER20 Klipper 0.2 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.12_nozzle_0.2", + "from": "system", + "setting_id": "G6ezw9j2ZskBlDcf", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.2 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.12_nozzle_0.2", - "setting_id": "G6ezw9j2ZskBlDcf", - "instantiation": "true", - "name": "0.12mm Draft @Eryone ER20 Klipper 0.2 nozzle", - "sparse_infill_pattern": "gyroid", - "type": "process" + "sparse_infill_pattern": "gyroid" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.14mm Extra Draft @Eryone ER20 Klipper 0.2 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.14mm Extra Draft @Eryone ER20 Klipper 0.2 nozzle.json index 17ddd78449..781bcc50b4 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.14mm Extra Draft @Eryone ER20 Klipper 0.2 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.14mm Extra Draft @Eryone ER20 Klipper 0.2 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.14mm Extra Draft @Eryone ER20 Klipper 0.2 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.14_nozzle_0.2", + "from": "system", + "setting_id": "REb8DrBmb84Jz1RU", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.2 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.14_nozzle_0.2", - "setting_id": "REb8DrBmb84Jz1RU", - "instantiation": "true", - "name": "0.14mm Extra Draft @Eryone ER20 Klipper 0.2 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.15mm Optimal @Eryone ER20 Klipper 0.5 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.15mm Optimal @Eryone ER20 Klipper 0.5 nozzle.json index dae8d693f8..6839e252df 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.15mm Optimal @Eryone ER20 Klipper 0.5 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.15mm Optimal @Eryone ER20 Klipper 0.5 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.15mm Optimal @Eryone ER20 Klipper 0.5 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.15_nozzle_0.5", + "from": "system", + "setting_id": "bwykEBgiXSoyw8zd", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.5 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.15_nozzle_0.5", - "setting_id": "bwykEBgiXSoyw8zd", - "instantiation": "true", - "name": "0.15mm Optimal @Eryone ER20 Klipper 0.5 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.18mm Fine @Eryone ER20 Klipper 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.18mm Fine @Eryone ER20 Klipper 0.6 nozzle.json index abba79b691..55b5c999e6 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.18mm Fine @Eryone ER20 Klipper 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.18mm Fine @Eryone ER20 Klipper 0.6 nozzle.json @@ -1,11 +1,11 @@ { - "compatible_printers": [ - "Eryone ER20 Klipper 0.6 nozzle" - ], - "from": "system", + "type": "process", + "name": "0.18mm Fine @Eryone ER20 Klipper 0.6 nozzle", "inherits": "fdm_process_ER20_Klipper_0.18_nozzle_0.6", + "from": "system", "setting_id": "4Wh9O5o6h68TEy69", "instantiation": "true", - "name": "0.18mm Fine @Eryone ER20 Klipper 0.6 nozzle", - "type": "process" + "compatible_printers": [ + "Eryone ER20 Klipper 0.6 nozzle" + ] } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Standard @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Standard @Eryone ER20 Klipper.json index 3208090373..bb42e46c99 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Standard @Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Standard @Eryone ER20 Klipper.json @@ -1,13 +1,13 @@ { + "type": "process", + "name": "0.20mm Standard @Eryone ER20 Klipper", + "inherits": "fdm_process_ER20_Klipper_0.20", + "from": "system", + "setting_id": "08wgu9MP0trL3JBg", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.4 nozzle" ], - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.20", - "setting_id": "08wgu9MP0trL3JBg", - "instantiation": "true", "layer_height": "0.20", - "name": "0.20mm Standard @Eryone ER20 Klipper", - "notes": "", - "type": "process" + "notes": "" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Strength @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Strength @Eryone ER20 Klipper.json index a0679cda21..b39dcd5503 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Strength @Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.20mm Strength @Eryone ER20 Klipper.json @@ -1,14 +1,14 @@ { + "type": "process", + "name": "0.20mm Strength @Eryone ER20 Klipper", + "inherits": "fdm_process_ER20_Klipper_0.20", + "from": "system", + "setting_id": "7pYaosUUA3Kv13pI", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.4 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.20", - "setting_id": "7pYaosUUA3Kv13pI", - "instantiation": "true", - "name": "0.20mm Strength @Eryone ER20 Klipper", "sparse_infill_density": "25%", - "type": "process", "wall_loops": "6" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Draft @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Draft @Eryone ER20 Klipper.json index 4a9d3d1a7b..0c33decbda 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Draft @Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Draft @Eryone ER20 Klipper.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.24mm Draft @Eryone ER20 Klipper", + "inherits": "fdm_process_ER20_Klipper_0.24", + "from": "system", + "setting_id": "SJzxe1s82yL2Lgrj", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.4 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.24", - "setting_id": "SJzxe1s82yL2Lgrj", - "instantiation": "true", - "name": "0.24mm Draft @Eryone ER20 Klipper", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Fine @Eryone ER20 Klipper 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Fine @Eryone ER20 Klipper 0.8 nozzle.json index 75c49ea75a..b0505f3053 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Fine @Eryone ER20 Klipper 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Fine @Eryone ER20 Klipper 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.24mm Fine @Eryone ER20 Klipper 0.8 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.24_nozzle_0.8", + "from": "system", + "setting_id": "FaQ9qpjWF28hexB2", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.24_nozzle_0.8", - "setting_id": "FaQ9qpjWF28hexB2", - "instantiation": "true", - "name": "0.24mm Fine @Eryone ER20 Klipper 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Optimal @Eryone ER20 Klipper 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Optimal @Eryone ER20 Klipper 0.6 nozzle.json index 67c4801673..c6ec9d4d14 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Optimal @Eryone ER20 Klipper 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.24mm Optimal @Eryone ER20 Klipper 0.6 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.24mm Optimal @Eryone ER20 Klipper 0.6 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.24_nozzle_0.6", + "from": "system", + "setting_id": "BaYIyJyVUiPXPjMr", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.6 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.24_nozzle_0.6", - "setting_id": "BaYIyJyVUiPXPjMr", - "instantiation": "true", - "name": "0.24mm Optimal @Eryone ER20 Klipper 0.6 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle.json index 74b798ed80..8c6142132e 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.25_nozzle_0.5", + "from": "system", + "setting_id": "GFnRlK2ceYBvswLe", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.5 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.25_nozzle_0.5", - "setting_id": "GFnRlK2ceYBvswLe", - "instantiation": "true", - "name": "0.25mm Standard @Eryone ER20 Klipper 0.5 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.28mm Extra Draft @Eryone ER20 Klipper.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.28mm Extra Draft @Eryone ER20 Klipper.json index 182198870c..10a767540c 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.28mm Extra Draft @Eryone ER20 Klipper.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.28mm Extra Draft @Eryone ER20 Klipper.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.28mm Extra Draft @Eryone ER20 Klipper", + "inherits": "fdm_process_ER20_Klipper_0.28", + "from": "system", + "setting_id": "q5VO6Fykaq7MeqA3", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.4 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.28", - "setting_id": "q5VO6Fykaq7MeqA3", - "instantiation": "true", - "name": "0.28mm Extra Draft @Eryone ER20 Klipper", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle.json index e89b4e4328..f1b660b67b 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.30_nozzle_0.6", + "from": "system", + "setting_id": "uteDUtHF4ALpNDE9", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.6 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.30_nozzle_0.6", - "setting_id": "uteDUtHF4ALpNDE9", - "instantiation": "true", - "name": "0.30mm Standard @Eryone ER20 Klipper 0.6 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Strength @Eryone ER20 Klipper 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Strength @Eryone ER20 Klipper 0.6 nozzle.json index 948cffdd9e..4c89f50816 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Strength @Eryone ER20 Klipper 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.30mm Strength @Eryone ER20 Klipper 0.6 nozzle.json @@ -1,14 +1,14 @@ { + "type": "process", + "name": "0.30mm Strength @Eryone ER20 Klipper 0.6 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.30_nozzle_0.6", + "from": "system", + "setting_id": "I69wf0KGngqBKs6d", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.6 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.30_nozzle_0.6", - "setting_id": "I69wf0KGngqBKs6d", - "instantiation": "true", - "name": "0.30mm Strength @Eryone ER20 Klipper 0.6 nozzle", "sparse_infill_density": "25%", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.32mm Optimal @Eryone ER20 Klipper 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.32mm Optimal @Eryone ER20 Klipper 0.8 nozzle.json index a4fab18d22..33b0a77c3b 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.32mm Optimal @Eryone ER20 Klipper 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.32mm Optimal @Eryone ER20 Klipper 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.32mm Optimal @Eryone ER20 Klipper 0.8 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.32_nozzle_0.8", + "from": "system", + "setting_id": "6ULt0zBZlGeQj0zL", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.32_nozzle_0.8", - "setting_id": "6ULt0zBZlGeQj0zL", - "instantiation": "true", - "name": "0.32mm Optimal @Eryone ER20 Klipper 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.36mm Draft @Eryone ER20 Klipper 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.36mm Draft @Eryone ER20 Klipper 0.6 nozzle.json index 32a776a3c3..ba2c8d73c5 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.36mm Draft @Eryone ER20 Klipper 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.36mm Draft @Eryone ER20 Klipper 0.6 nozzle.json @@ -1,13 +1,13 @@ { + "type": "process", + "name": "0.36mm Draft @Eryone ER20 Klipper 0.6 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.36_nozzle_0.6", + "from": "system", + "setting_id": "JLPcqoC2Uib9aRUQ", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.6 nozzle" ], "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.36_nozzle_0.6", - "setting_id": "JLPcqoC2Uib9aRUQ", - "instantiation": "true", - "name": "0.36mm Draft @Eryone ER20 Klipper 0.6 nozzle", - "travel_speed": "250", - "type": "process" + "travel_speed": "250" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle.json index 90db009e2c..8f53d41934 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.40_nozzle_0.8", + "from": "system", + "setting_id": "Rar12YnTox9pGeWw", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.40_nozzle_0.8", - "setting_id": "Rar12YnTox9pGeWw", - "instantiation": "true", - "name": "0.40mm Standard @Eryone ER20 Klipper 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.42mm Extra Draft @Eryone ER20 Klipper 0.6 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.42mm Extra Draft @Eryone ER20 Klipper 0.6 nozzle.json index 2fb538d04a..4eb71e439d 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.42mm Extra Draft @Eryone ER20 Klipper 0.6 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.42mm Extra Draft @Eryone ER20 Klipper 0.6 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.42mm Extra Draft @Eryone ER20 Klipper 0.6 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.42_nozzle_0.6", + "from": "system", + "setting_id": "8XAFm1qhJ5VbrcDt", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.6 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.42_nozzle_0.6", - "setting_id": "8XAFm1qhJ5VbrcDt", - "instantiation": "true", - "name": "0.42mm Extra Draft @Eryone ER20 Klipper 0.6 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.48mm Draft @Eryone ER20 Klipper 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.48mm Draft @Eryone ER20 Klipper 0.8 nozzle.json index 96a1373759..57d3990944 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.48mm Draft @Eryone ER20 Klipper 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.48mm Draft @Eryone ER20 Klipper 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.48mm Draft @Eryone ER20 Klipper 0.8 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.48_nozzle_0.8", + "from": "system", + "setting_id": "PtwzuflLVEwcJU1s", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.48_nozzle_0.8", - "setting_id": "PtwzuflLVEwcJU1s", - "instantiation": "true", - "name": "0.48mm Draft @Eryone ER20 Klipper 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.56mm Extra Draft @Eryone ER20 Klipper 0.8 nozzle.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.56mm Extra Draft @Eryone ER20 Klipper 0.8 nozzle.json index a76d38d67a..f9dcb4b411 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.56mm Extra Draft @Eryone ER20 Klipper 0.8 nozzle.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/0.56mm Extra Draft @Eryone ER20 Klipper 0.8 nozzle.json @@ -1,12 +1,12 @@ { + "type": "process", + "name": "0.56mm Extra Draft @Eryone ER20 Klipper 0.8 nozzle", + "inherits": "fdm_process_ER20_Klipper_0.56_nozzle_0.8", + "from": "system", + "setting_id": "yjLp31EgxsGWg3AY", + "instantiation": "true", "compatible_printers": [ "Eryone ER20 Klipper 0.8 nozzle" ], - "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_ER20_Klipper_0.56_nozzle_0.8", - "setting_id": "yjLp31EgxsGWg3AY", - "instantiation": "true", - "name": "0.56mm Extra Draft @Eryone ER20 Klipper 0.8 nozzle", - "type": "process" + "elefant_foot_compensation": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.06_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.06_nozzle_0.2.json index b7ddf5d471..e10f036503 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.06_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.06_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.06_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.06", "line_width": "0.22", - "name": "fdm_process_ER20_Klipper_0.06_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.06", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.06", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.08_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.08_nozzle_0.2.json index 023831538f..3717b77e01 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.08_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.08_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.08_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.08", "line_width": "0.22", - "name": "fdm_process_ER20_Klipper_0.08_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.08", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.08", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.10_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.10_nozzle_0.2.json index 7595ff7330..d1f2d8a94e 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.10_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.10_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.10_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.1", "line_width": "0.22", - "name": "fdm_process_ER20_Klipper_0.10_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.1", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.1", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12.json index 69ff2af25e..ea4b88c42c 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12.json @@ -1,12 +1,13 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.12", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", - "instantiation": "false", "layer_height": "0.12", - "name": "fdm_process_ER20_Klipper_0.12", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", @@ -14,6 +15,5 @@ "support_threshold_angle": "25", "support_top_z_distance": "0.16", "top_shell_layers": "5", - "top_shell_thickness": "0.6", - "type": "process" + "top_shell_thickness": "0.6" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12_nozzle_0.2.json index b05e4cc430..5193865b34 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.12_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.12_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.12", "line_width": "0.22", - "name": "fdm_process_ER20_Klipper_0.12_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.12", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.12", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.14_nozzle_0.2.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.14_nozzle_0.2.json index 4cb51f3fa3..34399dccb7 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.14_nozzle_0.2.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.14_nozzle_0.2.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.14_nozzle_0.2", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", "initial_layer_line_width": "0.25", "inner_wall_line_width": "0.22", - "instantiation": "false", "internal_solid_infill_line_width": "0.22", "ironing_inset": "0.11", "layer_height": "0.14", "line_width": "0.22", - "name": "fdm_process_ER20_Klipper_0.14_nozzle_0.2", "outer_wall_line_width": "0.22", "sparse_infill_line_width": "0.22", "support_bottom_z_distance": "0.14", @@ -18,6 +19,5 @@ "support_top_z_distance": "0.14", "top_shell_layers": "7", "top_surface_line_width": "0.22", - "type": "process", "wall_loops": "4" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.15_nozzle_0.5.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.15_nozzle_0.5.json index 8b9d0510d6..187eb955f0 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.15_nozzle_0.5.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.15_nozzle_0.5.json @@ -1,16 +1,17 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.15_nozzle_0.5", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bottom_shell_layers": "5", "bridge_flow": "1", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", "initial_layer_line_width": "0.52", "inner_wall_line_width": "0.55", - "instantiation": "false", "internal_solid_infill_line_width": "0.55", "ironing_inset": "0.21", "layer_height": "0.15", "line_width": "0.52", - "name": "fdm_process_ER20_Klipper_0.15_nozzle_0.5", "outer_wall_line_width": "0.52", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", @@ -22,6 +23,5 @@ "support_top_z_distance": "0.15", "top_shell_layers": "6", "top_shell_thickness": "0", - "top_surface_line_width": "0.52", - "type": "process" + "top_surface_line_width": "0.52" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.16.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.16.json index 838270870f..c2a2da9584 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.16.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.16.json @@ -1,18 +1,18 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.16", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "bottom_shell_layers": "5", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", - "instantiation": "false", "layer_height": "0.16", - "name": "fdm_process_ER20_Klipper_0.16", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "support_bottom_z_distance": "0.16", "support_top_z_distance": "0.16", "top_shell_layers": "6", - "top_shell_thickness": "0", - "type": "process" + "top_shell_thickness": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.18_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.18_nozzle_0.6.json index c43af7a161..637d483e3e 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.18_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.18_nozzle_0.6.json @@ -1,22 +1,22 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.18_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.18", "line_width": "0.62", - "name": "fdm_process_ER20_Klipper_0.18_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_bottom_z_distance": "0.18", "support_line_width": "0.62", "support_top_z_distance": "0.18", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.20.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.20.json index 0a0fbc96ca..4eb554ffa4 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.20.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.20.json @@ -1,18 +1,18 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.20", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "bottom_shell_layers": "5", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", - "instantiation": "false", "layer_height": "0.20", - "name": "fdm_process_ER20_Klipper_0.20", "overhang_1_4_speed": "60", "overhang_2_4_speed": "30", "overhang_3_4_speed": "10", "support_bottom_z_distance": "0.16", "support_top_z_distance": "0.16", "top_shell_layers": "5", - "top_shell_thickness": "0", - "type": "process" + "top_shell_thickness": "0" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24.json index d20c74bbf5..16fc9471ef 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24.json @@ -1,16 +1,16 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.24", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", - "instantiation": "false", "layer_height": "0.24", - "name": "fdm_process_ER20_Klipper_0.24", "support_bottom_z_distance": "0.16", "support_top_z_distance": "0.16", "support_threshold_angle": "35", "top_shell_layers": "5", "top_shell_thickness": "0", - "top_surface_line_width": "0.45", - "type": "process" + "top_surface_line_width": "0.45" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.6.json index eb55b212e5..69c93e65b8 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.24_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.24", "line_width": "0.62", - "name": "fdm_process_ER20_Klipper_0.24_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.8.json index bb639fd3db..272bee0193 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.24_nozzle_0.8.json @@ -1,21 +1,21 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.24_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.24", "line_width": "0.82", - "name": "fdm_process_ER20_Klipper_0.24_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "type": "process" + "top_surface_line_width": "0.82" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.25_nozzle_0.5.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.25_nozzle_0.5.json index 4de34c25a9..253a74cdbc 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.25_nozzle_0.5.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.25_nozzle_0.5.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.25_nozzle_0.5", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.52", "initial_layer_print_height": "0.2", "inner_wall_line_width": "0.52", - "instantiation": "false", "internal_solid_infill_line_width": "0.52", "ironing_inset": "0.21", "layer_height": "0.25", "line_width": "0.52", - "name": "fdm_process_ER20_Klipper_0.25_nozzle_0.5", "outer_wall_line_width": "0.52", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.52", "support_line_width": "0.52", - "top_surface_line_width": "0.52", - "type": "process" + "top_surface_line_width": "0.52" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.28.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.28.json index a38384ccd6..ea275d2f8a 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.28.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.28.json @@ -1,16 +1,16 @@ { + "type": "process", + "name": "fdm_process_ER20_Klipper_0.28", + "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", "bridge_flow": "1", "elefant_foot_compensation": "0", - "from": "system", - "inherits": "fdm_process_eryone_ER20_Klipper_common", - "instantiation": "false", "layer_height": "0.28", - "name": "fdm_process_ER20_Klipper_0.28", "support_bottom_z_distance": "0.16", "support_threshold_angle": "40", "support_top_z_distance": "0.16", "top_shell_layers": "4", "top_shell_thickness": "0", - "top_surface_line_width": "0.45", - "type": "process" + "top_surface_line_width": "0.45" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.30_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.30_nozzle_0.6.json index d9c7546b71..96353e5a49 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.30_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.30_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.30_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.3", "line_width": "0.62", - "name": "fdm_process_ER20_Klipper_0.30_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.32_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.32_nozzle_0.8.json index 926c1d2eb7..a4db98d968 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.32_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.32_nozzle_0.8.json @@ -1,21 +1,21 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.32_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.32", "line_width": "0.82", - "name": "fdm_process_ER20_Klipper_0.32_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", - "top_surface_line_width": "0.82", - "type": "process" + "top_surface_line_width": "0.82" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.36_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.36_nozzle_0.6.json index b460bfc6da..c3342ea896 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.36_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.36_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.36_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.36", "line_width": "0.62", - "name": "fdm_process_ER20_Klipper_0.36_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.40_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.40_nozzle_0.8.json index 0322029ca6..b1af14348b 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.40_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.40_nozzle_0.8.json @@ -1,22 +1,22 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.40_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.4", "line_width": "0.82", - "name": "fdm_process_ER20_Klipper_0.40_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "type": "process" + "top_surface_pattern": "monotonic" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.42_nozzle_0.6.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.42_nozzle_0.6.json index 2740014d1b..76d5c254d7 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.42_nozzle_0.6.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.42_nozzle_0.6.json @@ -1,20 +1,20 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.42_nozzle_0.6", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.62", "initial_layer_print_height": "0.3", "inner_wall_line_width": "0.62", - "instantiation": "false", "internal_solid_infill_line_width": "0.62", "ironing_inset": "0.31", "layer_height": "0.42", "line_width": "0.62", - "name": "fdm_process_ER20_Klipper_0.42_nozzle_0.6", "outer_wall_line_width": "0.62", "overhang_3_4_speed": "15", "sparse_infill_line_width": "0.62", "support_line_width": "0.62", - "top_surface_line_width": "0.62", - "type": "process" + "top_surface_line_width": "0.62" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.48_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.48_nozzle_0.8.json index 63391ccad7..32df0df51e 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.48_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.48_nozzle_0.8.json @@ -1,22 +1,22 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.48_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.48", "line_width": "0.82", - "name": "fdm_process_ER20_Klipper_0.48_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "type": "process" + "top_surface_pattern": "monotonic" } diff --git a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.56_nozzle_0.8.json b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.56_nozzle_0.8.json index 49c926381d..94a133d6a2 100644 --- a/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.56_nozzle_0.8.json +++ b/resources/profiles/Eryone/process/eryone_ER20_Klipper/fdm_process_ER20_Klipper_0.56_nozzle_0.8.json @@ -1,22 +1,22 @@ { - "bridge_flow": "1", - "from": "system", + "type": "process", + "name": "fdm_process_ER20_Klipper_0.56_nozzle_0.8", "inherits": "fdm_process_eryone_ER20_Klipper_common", + "from": "system", + "instantiation": "false", + "bridge_flow": "1", "initial_layer_line_width": "0.82", "initial_layer_print_height": "0.4", "inner_wall_line_width": "0.82", - "instantiation": "false", "internal_solid_infill_line_width": "0.82", "ironing_inset": "0.41", "layer_height": "0.56", "line_width": "0.82", - "name": "fdm_process_ER20_Klipper_0.56_nozzle_0.8", "outer_wall_line_width": "0.82", "overhang_3_4_speed": "25", "overhang_4_4_speed": "5", "sparse_infill_line_width": "0.82", "support_line_width": "0.82", "top_surface_line_width": "0.82", - "top_surface_pattern": "monotonic", - "type": "process" + "top_surface_pattern": "monotonic" } diff --git a/resources/profiles/FLSun.json b/resources/profiles/FLSun.json index 36d0129015..d8d91a09a0 100644 --- a/resources/profiles/FLSun.json +++ b/resources/profiles/FLSun.json @@ -1,6 +1,6 @@ { "name": "FLSun", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "FLSun configurations", "machine_model_list": [ diff --git a/resources/profiles/FLSun/filament/Generic ABS @FLSun S1.json b/resources/profiles/FLSun/filament/Generic ABS @FLSun S1.json index 3a57d47404..07bde5301d 100644 --- a/resources/profiles/FLSun/filament/Generic ABS @FLSun S1.json +++ b/resources/profiles/FLSun/filament/Generic ABS @FLSun S1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @FLSun S1", - "inherits": "Generic ABS @FLSun", "renamed_from": "FLSun S1 ABS", + "inherits": "Generic ABS @FLSun", "from": "system", "setting_id": "a7U3u888FlJ6CSFb", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic ABS @FLSun T1.json b/resources/profiles/FLSun/filament/Generic ABS @FLSun T1.json index 36c684cdc6..54c0f5457e 100644 --- a/resources/profiles/FLSun/filament/Generic ABS @FLSun T1.json +++ b/resources/profiles/FLSun/filament/Generic ABS @FLSun T1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @FLSun T1", - "inherits": "Generic ABS @FLSun", "renamed_from": "FLSun T1 ABS", + "inherits": "Generic ABS @FLSun", "from": "system", "setting_id": "j185WWfVulPxWJvQ", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic ABS @FLSun.json b/resources/profiles/FLSun/filament/Generic ABS @FLSun.json index 2daf007fe9..ce04f9a073 100644 --- a/resources/profiles/FLSun/filament/Generic ABS @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic ABS @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @FLSun", - "inherits": "fdm_filament_abs", "renamed_from": "FLSun Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "1lPapSrZbKMLBx6k", "filament_id": "OFY9muEs", diff --git a/resources/profiles/FLSun/filament/Generic ASA @FLSun S1.json b/resources/profiles/FLSun/filament/Generic ASA @FLSun S1.json index d605ac5519..e858be9f6c 100644 --- a/resources/profiles/FLSun/filament/Generic ASA @FLSun S1.json +++ b/resources/profiles/FLSun/filament/Generic ASA @FLSun S1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @FLSun S1", - "inherits": "Generic ASA @FLSun", "renamed_from": "FLSun S1 ASA", + "inherits": "Generic ASA @FLSun", "from": "system", "setting_id": "qJeJII6CgHuaC4Iz", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic ASA @FLSun T1.json b/resources/profiles/FLSun/filament/Generic ASA @FLSun T1.json index c27f9e34dd..e7acf671d9 100644 --- a/resources/profiles/FLSun/filament/Generic ASA @FLSun T1.json +++ b/resources/profiles/FLSun/filament/Generic ASA @FLSun T1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @FLSun T1", - "inherits": "Generic ASA @FLSun", "renamed_from": "FLSun T1 ASA", + "inherits": "Generic ASA @FLSun", "from": "system", "setting_id": "kj4PPnvuvvGDrDwA", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic ASA @FLSun.json b/resources/profiles/FLSun/filament/Generic ASA @FLSun.json index e86f82f441..681f5a381b 100644 --- a/resources/profiles/FLSun/filament/Generic ASA @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic ASA @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @FLSun", - "inherits": "fdm_filament_asa", "renamed_from": "FLSun Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "22OH64Yfg5sdyEmz", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/FLSun/filament/Generic PA @FLSun.json b/resources/profiles/FLSun/filament/Generic PA @FLSun.json index 49fe8c01fc..a47ceea70a 100644 --- a/resources/profiles/FLSun/filament/Generic PA @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic PA @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @FLSun", - "inherits": "fdm_filament_pa", "renamed_from": "FLSun Generic PA", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "hlHGTLqHjaRfMkqC", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/FLSun/filament/Generic PA-CF @FLSun.json b/resources/profiles/FLSun/filament/Generic PA-CF @FLSun.json index b6dc311dcf..370cdb2e6e 100644 --- a/resources/profiles/FLSun/filament/Generic PA-CF @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic PA-CF @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @FLSun", - "inherits": "fdm_filament_pa", "renamed_from": "FLSun Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "xiLUY07SM81i1pPs", "filament_id": "OFQLcbps", diff --git a/resources/profiles/FLSun/filament/Generic PC @FLSun.json b/resources/profiles/FLSun/filament/Generic PC @FLSun.json index e4d81857d3..74f6bbfa1a 100644 --- a/resources/profiles/FLSun/filament/Generic PC @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic PC @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @FLSun", - "inherits": "fdm_filament_pc", "renamed_from": "FLSun Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "Ok08F2LxNjxor6ph", "filament_id": "OFLakOUI", diff --git a/resources/profiles/FLSun/filament/Generic PETG @FLSun S1.json b/resources/profiles/FLSun/filament/Generic PETG @FLSun S1.json index 02506525dd..8af106f03d 100644 --- a/resources/profiles/FLSun/filament/Generic PETG @FLSun S1.json +++ b/resources/profiles/FLSun/filament/Generic PETG @FLSun S1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @FLSun S1", - "inherits": "Generic PETG @FLSun", "renamed_from": "FLSun S1 PETG", + "inherits": "Generic PETG @FLSun", "from": "system", "setting_id": "LxDenrdsmz0QjMDE", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic PETG @FLSun T1.json b/resources/profiles/FLSun/filament/Generic PETG @FLSun T1.json index 64651bea1d..8a51e86e6b 100644 --- a/resources/profiles/FLSun/filament/Generic PETG @FLSun T1.json +++ b/resources/profiles/FLSun/filament/Generic PETG @FLSun T1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @FLSun T1", - "inherits": "Generic PETG @FLSun", "renamed_from": "FLSun T1 PETG", + "inherits": "Generic PETG @FLSun", "from": "system", "setting_id": "n9wpUe32lTtq2iSS", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic PETG @FLSun.json b/resources/profiles/FLSun/filament/Generic PETG @FLSun.json index 84eaee1c7c..22dbbbf5e7 100644 --- a/resources/profiles/FLSun/filament/Generic PETG @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic PETG @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @FLSun", - "inherits": "fdm_filament_pet", "renamed_from": "FLSun Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "pWuJLjWhYMutD92n", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/FLSun/filament/Generic PLA @FLSun S1.json b/resources/profiles/FLSun/filament/Generic PLA @FLSun S1.json index 5674ba8c27..9fa17d0e6b 100644 --- a/resources/profiles/FLSun/filament/Generic PLA @FLSun S1.json +++ b/resources/profiles/FLSun/filament/Generic PLA @FLSun S1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @FLSun S1", - "inherits": "Generic PLA @FLSun", "renamed_from": "FLSun S1 PLA Generic", + "inherits": "Generic PLA @FLSun", "from": "system", "setting_id": "4f9vGTYsHDbZoVjs", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/FLSun/filament/Generic PLA @FLSun T1.json b/resources/profiles/FLSun/filament/Generic PLA @FLSun T1.json index 93b9ac08d4..d5a35a8138 100644 --- a/resources/profiles/FLSun/filament/Generic PLA @FLSun T1.json +++ b/resources/profiles/FLSun/filament/Generic PLA @FLSun T1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @FLSun T1", - "inherits": "Generic PLA @FLSun", "renamed_from": "FLSun T1 PLA Generic", + "inherits": "Generic PLA @FLSun", "from": "system", "setting_id": "5aJUZ6r6jtnvck19", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/FLSun/filament/Generic PLA @FLSun.json b/resources/profiles/FLSun/filament/Generic PLA @FLSun.json index a4f8655ff9..f5696d5205 100644 --- a/resources/profiles/FLSun/filament/Generic PLA @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic PLA @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @FLSun", - "inherits": "fdm_filament_pla", "renamed_from": "FLSun Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "JcpwaJCVC9MoJrPB", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun S1.json b/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun S1.json index af00b2272d..daf2d6cfc5 100644 --- a/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun S1.json +++ b/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun S1.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA High Speed @FLSun S1", - "inherits": "Generic PLA High Speed @System", "renamed_from": "FLSun S1 PLA High Speed", + "inherits": "Generic PLA High Speed @System", "from": "system", "setting_id": "ONz6C8a3AMGWxqdK", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_multitool_ramming_flow": [ "10" ], diff --git a/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun T1.json b/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun T1.json index 7468aadd31..e53b94fe26 100644 --- a/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun T1.json +++ b/resources/profiles/FLSun/filament/Generic PLA High Speed @FLSun T1.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA High Speed @FLSun T1", - "inherits": "Generic PLA High Speed @System", "renamed_from": "FLSun T1 PLA High Speed", + "inherits": "Generic PLA High Speed @System", "from": "system", "setting_id": "en1l0jgFX97t6qUi", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_multitool_ramming_flow": [ "10" ], diff --git a/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun S1.json b/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun S1.json index 0ec0d28da4..d4425663dc 100644 --- a/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun S1.json +++ b/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun S1.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA Silk @FLSun S1", - "inherits": "Generic PLA Silk @System", "renamed_from": "FLSun S1 PLA Silk", + "inherits": "Generic PLA Silk @System", "from": "system", "setting_id": "NTJw0fbcn3JoOr0R", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_retraction_length": [ "nil" ], diff --git a/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun T1.json b/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun T1.json index 891697aa01..b5c18fb00b 100644 --- a/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun T1.json +++ b/resources/profiles/FLSun/filament/Generic PLA Silk @FLSun T1.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA Silk @FLSun T1", - "inherits": "Generic PLA Silk @System", "renamed_from": "FLSun T1 PLA Silk", + "inherits": "Generic PLA Silk @System", "from": "system", "setting_id": "y2p7TTGI8XWIeiQY", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_retraction_length": [ "nil" ], diff --git a/resources/profiles/FLSun/filament/Generic PLA-CF @FLSun.json b/resources/profiles/FLSun/filament/Generic PLA-CF @FLSun.json index 87b301513e..e5e25b612c 100644 --- a/resources/profiles/FLSun/filament/Generic PLA-CF @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic PLA-CF @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @FLSun", - "inherits": "fdm_filament_pla", "renamed_from": "FLSun Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "teBJEScAMecyn3JU", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/FLSun/filament/Generic PVA @FLSun.json b/resources/profiles/FLSun/filament/Generic PVA @FLSun.json index 9279ece682..0117b6fad5 100644 --- a/resources/profiles/FLSun/filament/Generic PVA @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic PVA @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @FLSun", - "inherits": "fdm_filament_pva", "renamed_from": "FLSun Generic PVA", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "hyVWJBubfQl497iO", "filament_id": "OFDvXujf", diff --git a/resources/profiles/FLSun/filament/Generic TPU @FLSun S1.json b/resources/profiles/FLSun/filament/Generic TPU @FLSun S1.json index 76e27d9be3..21fe1d4443 100644 --- a/resources/profiles/FLSun/filament/Generic TPU @FLSun S1.json +++ b/resources/profiles/FLSun/filament/Generic TPU @FLSun S1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @FLSun S1", - "inherits": "Generic TPU @FLSun", "renamed_from": "FLSun S1 TPU", + "inherits": "Generic TPU @FLSun", "from": "system", "setting_id": "xDnQih17nXmGPoPc", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic TPU @FLSun T1.json b/resources/profiles/FLSun/filament/Generic TPU @FLSun T1.json index 25f60f10e1..bfaea98bda 100644 --- a/resources/profiles/FLSun/filament/Generic TPU @FLSun T1.json +++ b/resources/profiles/FLSun/filament/Generic TPU @FLSun T1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @FLSun T1", - "inherits": "Generic TPU @FLSun", "renamed_from": "FLSun T1 TPU", + "inherits": "Generic TPU @FLSun", "from": "system", "setting_id": "TEakmydLXxrHti3G", "instantiation": "true", diff --git a/resources/profiles/FLSun/filament/Generic TPU @FLSun.json b/resources/profiles/FLSun/filament/Generic TPU @FLSun.json index 70d1b8c42a..199a85987a 100644 --- a/resources/profiles/FLSun/filament/Generic TPU @FLSun.json +++ b/resources/profiles/FLSun/filament/Generic TPU @FLSun.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @FLSun", - "inherits": "fdm_filament_tpu", "renamed_from": "FLSun Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "gJ3UZr4n4K8DPdBz", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json index e75c40726b..a2adfba683 100644 --- a/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json +++ b/resources/profiles/FLSun/machine/FLSun S1 0.4 nozzle.json @@ -46,45 +46,59 @@ "80" ], "machine_max_acceleration_e": [ + "40000", "40000" ], "machine_max_acceleration_extruding": [ + "40000", "40000" ], "machine_max_acceleration_retracting": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "40000", "40000" ], "machine_max_jerk_e": [ + "100", "100" ], "machine_max_jerk_x": [ + "20000", "20000" ], "machine_max_jerk_y": [ + "20000", "20000" ], "machine_max_jerk_z": [ + "10000", "10000" ], "machine_max_speed_e": [ + "1200", "1200" ], "machine_max_speed_x": [ + "1200", "1200" ], "machine_max_speed_y": [ + "1200", "1200" ], "machine_max_speed_z": [ + "1200", "1200" ], "printable_area": [ diff --git a/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json b/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json index 3cff2526eb..a1d43dc592 100644 --- a/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json +++ b/resources/profiles/FLSun/machine/FLSun T1 0.4 nozzle.json @@ -46,45 +46,59 @@ "70" ], "machine_max_acceleration_e": [ + "30000", "30000" ], "machine_max_acceleration_extruding": [ + "30000", "30000" ], "machine_max_acceleration_retracting": [ + "30000", "30000" ], "machine_max_acceleration_x": [ + "30000", "30000" ], "machine_max_acceleration_y": [ + "30000", "30000" ], "machine_max_acceleration_z": [ + "30000", "30000" ], "machine_max_jerk_e": [ + "100", "100" ], "machine_max_jerk_x": [ + "20000", "20000" ], "machine_max_jerk_y": [ + "20000", "20000" ], "machine_max_jerk_z": [ + "10000", "10000" ], "machine_max_speed_e": [ + "1000", "1000" ], "machine_max_speed_x": [ + "1000", "1000" ], "machine_max_speed_y": [ + "1000", "1000" ], "machine_max_speed_z": [ + "1000", "1000" ], "printable_area": [ diff --git a/resources/profiles/Flashforge.json b/resources/profiles/Flashforge.json index cda2215a33..be6e64da1e 100644 --- a/resources/profiles/Flashforge.json +++ b/resources/profiles/Flashforge.json @@ -1,7 +1,7 @@ { "name": "Flashforge", "url": "", - "version": "02.04.00.09", + "version": "02.04.00.11", "force_update": "0", "description": "Flashforge configurations", "machine_model_list": [ diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json index 7ba9ffc527..f394f8f15d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "fgEYZ1Mgyp1AvtwU", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json index d797114137..020a3ec800 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "cIxbQMVdG5K85rJr", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X.json index 82e08e3f49..ecdcc55df5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "9GXBeuCUrScJfmJB", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF Adventurer A5.json index 0ea70e0bf4..eef66d26e8 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "rDW4AwKc7SD7WIxN", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5.json index 5e5ce18eea..30714730ad 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "ds0GgE1jssl4IbF3", "filament_id": "OFibWuBd", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5P.json index 9ea370b14b..ca1681ca27 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "UTWbwTYuXYbBx3uw", "filament_id": "OFibWuBd", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json index c38639dd89..5f0155e58a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "NttDJCrfB01uwMDl", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json index 9709d11e22..29115ab4d5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "hJd6dG6OdEffEFC7", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json index 2f3d072baf..8fed11ee6b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "8yFCuCnEuI3dUvQy", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 HF.json index a6badb7396..763e98e344 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "np4fP5kghRlczOTT", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4.json index c70351a9b1..6ebc5b5fc5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "8o2maTFOXq0XR6Dm", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json index d6be224ddc..bcf7f43a43 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vCsjC0UnKenzIR0O", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json index 9ff2f3f54a..d074cb6f53 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "xhxVdlmh5r7meoHo", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json index d2c5c73541..129253e9d8 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "6dlQN4Xhd6kGZ0Qn", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P HF.json index c4b58df04c..18f6622fa6 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "r8WVFPozL8f5oLVJ", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P.json index ebf003f20d..17cc2d9f95 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "xw0pZNmhw1K4tPQ1", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS Basic.json b/resources/profiles/Flashforge/filament/Flashforge ABS Basic.json index 8be3cb0913..b2bb4df5d5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS Basic.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS Basic.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "m6QLC2UaS3fW298i", "filament_id": "OFibWuBd", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge ABS Basic" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json index 398f80f8a5..1289d1c7ef 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Nx3Px0Zu356IKShT", "filament_id": "OFYTIMbj", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4.json index 3fd0dc97ea..f4bf737da4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "d4EGsmMeEDCOUBF2", "filament_id": "OFYTIMbj", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "complete_print_exhaust_fan_speed": [ "50" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json index 043e0ea208..e0a4aa3260 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "9ziPFKsjESbw1pXL", "filament_id": "OFYTIMbj", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P.json index 77148bf480..25550aded3 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-CF @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "NzJJs6yrSik5xuyX", "filament_id": "OFYTIMbj", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "complete_print_exhaust_fan_speed": [ "50" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5.json index 8cb591fa47..0d4d387a4e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "UinlbuXNbad2kN0s", "filament_id": "OFojbdhR", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5P.json index 3fefbd7a96..c1cb75784b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ABS-GF @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "ycgiXY41kqNgslE3", "filament_id": "OFojbdhR", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json index f7d1332ec2..ee9f015d7a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA @FF AD5M 0.25 Nozzle.json @@ -4,10 +4,10 @@ "inherits": "Generic ASA @Flashforge", "from": "system", "filament_id": "OFJS560n", + "instantiation": "false", "filament_vendor": [ "Flashforge" ], - "instantiation": "false", "compatible_printers": [ "Flashforge Adventurer 5M 0.25 Nozzle", "Flashforge Adventurer 5M Pro 0.25 Nozzle" diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json index 0f99d476fc..a80eb8aac6 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5M 0.25 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "kjS4k8nrIdNNNoWw", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge ASA Basic @FF AD5M 0.25 nozzle" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json index 9a3aac8573..d626f4b25e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.25 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Y647IFVkk5JIXzte", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json index 7a199389af..84907ec84b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vaOyXUcrJ97KE7ZW", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json index 3c2e7173bf..55a3bb3550 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "iLWq5pJ3ox9EAM1Z", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X.json index 68f66a1f6b..b58051e0be 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "i7PUPYxy0Z9weyyA", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF Adventurer A5.json index 80943c015a..05dc0925a5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "FY9mcqOyuu1Gqq1m", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5.json index 5aec1c1d8b..ad94105eb5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "UUSDyOetXSOuBIUd", "filament_id": "OFFFg2Pf", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5P.json index 18ae2c78f1..9afefb0909 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "2r0kwhklE24Hp94O", "filament_id": "OFFFg2Pf", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json index 66ae12c06c..87e870ecae 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "w8O6oenp0NymzCqf", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json index 166d3a01ab..03849119fe 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "thhmWRzNYLYJOeR2", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json index 54e47a5e64..bfa2769868 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "g5jiz6Q6or23BIo7", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 HF.json index 01db10d49d..66db692dd2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "7xmWlHHNMvXBKdYS", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4.json index 9cdc87b1e5..8e81c9b855 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "r0B8KfZ1mNWMvGqE", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json index d8801abca8..ae0473e389 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "CBLZqLhkwf5XKO12", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json index 1cc08eabb3..30234b7f4c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Df3anJxiRXLVO9hw", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json index 30787c9de1..3ba4b3f7fe 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Nu4WvBWuEhazZfh5", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P HF.json index 5b73e31a49..465105b8dc 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "hF0h4ye3hMDtEba1", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P.json index 05223314f5..b85d3cf82a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "3isZCWr4CBjFtGDX", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA Basic.json b/resources/profiles/Flashforge/filament/Flashforge ASA Basic.json index 2500eacd3f..100726da10 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA Basic.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA Basic.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "SU6r879TbQMUFCij", "filament_id": "OFFFg2Pf", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge ASA Basic" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5.json index 5cd421f15c..7daa8cfda2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5.json @@ -6,6 +6,9 @@ "setting_id": "TqU1elqwuVr9EhTA", "filament_id": "OFq0TY7C", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5P.json index c61eb8159b..7119ae83d9 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA-CF @FF C5P.json @@ -6,6 +6,9 @@ "setting_id": "nMczAtoc5W0J2WkS", "filament_id": "OFq0TY7C", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5.json index de98bbdf41..c5cebbe5e0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "941E5MaAyFY3iv4V", "filament_id": "OFrZDhVt", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5P.json index 0bff2a9e2c..ab61e17048 100644 --- a/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge ASA-GF @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "RdmsxyUGUX8Ot4oj", "filament_id": "OFrZDhVt", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5.json index 608d143031..5f7e75ad38 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "ckwc7U0Q2eKHmCxY", "filament_id": "OFvaLVML", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5P.json index 14a3d39616..eda0021d7c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "AEQYrT7e4Q5J2G6C", "filament_id": "OFvaLVML", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 Pro 0.4 nozzle", "Flashforge Creator 5 Pro 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json index bb2f4387b9..b6071e5dc1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "jUNUZhE0BJyB64fC", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 nozzle.json index 597e24ade7..93a88f3576 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "0qMEqo9YMDLSVafs", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json index 5b17792267..b71f191b47 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ek749gIdUAPq6WxT", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 HF.json index b79fa3d0d2..91a8add8fe 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "tEohTtyHofD6l6o3", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "complete_print_exhaust_fan_speed": [ "50" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4.json index 96b5849040..e1d3687137 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "oLeLrIjFJzoZha3E", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json index cb385fd395..fac11c2185 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "HXGUlYY4X5IHhL3R", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 nozzle.json index a32508d8b0..a7932d87e9 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "g22Cv3zy3h5BhJYK", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json index b2958e0032..08db515203 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "aDzBXuvN7IuSP5sa", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P HF.json index bbbaebe8b8..4b2c461dfb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "CIj24REX7BA8zPHQ", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "complete_print_exhaust_fan_speed": [ "50" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P.json index bc52c94e5b..205591ea81 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge HIPS @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "yAGyGjF6uDrjfjLn", "filament_id": "OFvaLVML", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json index c1dd59623c..4f87423ffd 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vOqAGzaYLz0XdRvC", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json index 21198590ac..6d80e34383 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "KSuxZ3fpQz0khDSz", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X.json index 23703621f3..4e3f23c94c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "o4B1kAToVny7jw0M", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF Adventurer A5.json index 5825f17141..9eb341d698 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ZpNEEHTtvhMJS8Kv", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5.json index a48606e3c0..a74c501133 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "kpRved5M3NktqIYn", "filament_id": "OFDxxTpW", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5P.json index 9ceca02a50..72be5b0240 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "ypxgjHl9uIMyZIce", "filament_id": "OFDxxTpW", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json index 28565a5c3b..abd6ad90f2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "q9UbakUmZPzG3xU0", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 nozzle.json index 592b3fe094..deb7150b48 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "IL18Lu0qHx1RVqKD", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json index e4b953f089..52d9c81da9 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "2FQib7fZjcwfCnm2", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json index 3534f1a60b..6d7728b5d9 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "CtwOm90WWD4S7U6j", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4.json index 5a47b94941..fe42a7839c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "kvULpm0WhKiSPj8V", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json index 26df92ae7b..6915366030 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "CUU7knzm4cbe1giE", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json index b936141d13..51ca8798b7 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "gcYvL572cumWZdnl", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json index f53c9c41e3..c8c5e5a53e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "cx99AH0C575XxAj9", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json index 263224a1ea..ec23e9a241 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "RrrKoR7MVD8IFQlq", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P.json index ff09b6e445..80dcdfccd6 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "7VEPGuR16wNukAX2", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PETG.json b/resources/profiles/Flashforge/filament/Flashforge HS PETG.json index 3ee8ed9e42..dd06f811c5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PETG.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PETG.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "H9uwlPw6m6Nf7qH5", "filament_id": "OFDxxTpW", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge HS PETG" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json index d511cdafe6..35d20cded2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5M 0.25 Nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "OmDped3weZ4uHAtY", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Adventurer 5M 0.25 Nozzle", "Flashforge Adventurer 5M Pro 0.25 Nozzle" diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json index 082b03f19b..2c2162d5cf 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "oD592bif4ra0ADco", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json index 6571d871b4..5c11af86f6 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ldhMY6F7v6nK8wwf", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X.json index a5b788402d..df25c44944 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "5vzOmbjHbkJXrgYM", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF Adventurer A5.json index 9f34aa44af..2df2ee66c3 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "2L7FS5JeAyPb3y0s", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5.json index 85c0b17327..2106876030 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "xSJk7LFpYKmckPQh", "filament_id": "OFIK2H3G", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5P.json index 667e4045b9..08dfa6d74a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "xdFZUsj1cNLXdvT6", "filament_id": "OFIK2H3G", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json index ba4f6bc6d9..2ccf5b9e65 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "hzxRPyH1fqarsMuN", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 nozzle.json index 4e69e17253..4b0b75ad6c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "oJsLlIIpxwGSoJTv", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json index ad8f07ef26..551945e272 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "hJbNZ381ERkZ0KUB", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 HF.json index f202e50f11..81a37ad4f5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "BqavrNpwhXDXcZ3r", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4.json index 7472f78b02..a77b12bced 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "cgf4Qk4iHZh7zHN5", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json index 2bc30165fc..737ba3b476 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "p31K69Srld6o4sQ2", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json index b5308a0f8c..ef76855837 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "MwbYvnRIzlNmH81h", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json index 2c2ee97348..613fb82ce1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "rKhHmkqXYD2xN4K9", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P HF.json index 88184f5a92..caef6473f1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Dshsi3O7NvYYjXJt", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P.json index cd59be156d..d127543ac1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "mfnL6QEevCmTmOL0", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json index 3281932fe8..1541e28697 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "AGLHrHKWye0YTtNK", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json index f5de82a8bb..c924aa4ee5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "px8qzmB2yFLoNl83", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json index da6fd90d98..ff90bc0593 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "mwuIEsBz5bXEV68w", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json index bb2d6256b6..0721d38cc0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "TielygFT88owWg4J", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json index 149406f025..59dbba6ad3 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "It2NI6OFhNEUvulz", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json index 22b1a35dcb..a7c152efc5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle.json @@ -1,15 +1,15 @@ { "type": "filament", "name": "Flashforge HS PLA Burnt Ti@FF G4 0.8 HF nozzle", - "inherits": "Generic PLA @Flashforge G3U 0.6 Nozzle", "renamed_from": "Flashforge PLA Buint Ti @FF G4 0.8 nozzle;Flashforge PLA Buint Ti FF G4 0.8 nozzle", + "inherits": "Generic PLA @Flashforge G3U 0.6 Nozzle", "from": "system", "setting_id": "Qt3huWxoYpMEqEN6", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json index 6fb09f1458..59609aa49d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Y3XuavnnOMoHLGHA", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json index dccc672613..8361d79c60 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle.json @@ -1,15 +1,15 @@ { "type": "filament", "name": "Flashforge HS PLA Burnt Ti@FF G4P 0.8 HF nozzle", - "inherits": "Generic PLA @Flashforge G3U 0.6 Nozzle", "renamed_from": "Flashforge PLA Buint Ti @FF G4P 0.8 nozzle;Flashforge PLA Buint Ti FF G4P 0.8 nozzle", + "inherits": "Generic PLA @Flashforge G3U 0.6 Nozzle", "from": "system", "setting_id": "2HUxAWeolJIlxPs1", "filament_id": "OF8O09RG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA+ @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA+ @FF Adventurer A5.json index 22c1c9870f..c2bd7154f7 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA+ @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA+ @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "V4jIUQzxoZkK50mn", "filament_id": "OFXB8ZI7", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge HS PLA.json b/resources/profiles/Flashforge/filament/Flashforge HS PLA.json index 8002ac7ba9..58f8fca603 100644 --- a/resources/profiles/Flashforge/filament/Flashforge HS PLA.json +++ b/resources/profiles/Flashforge/filament/Flashforge HS PLA.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vdaZBnDsmUC1fhDp", "filament_id": "OFIK2H3G", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge HS PLA" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 0.6 HF nozzle.json index f5d60553e6..dabb15e3cd 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "u7rolQaTQz9U6veH", "filament_id": "OFEvEfw5", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 HF.json index 8b10616a83..c8b9164985 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "qTGTwiliWj3dSo9y", "filament_id": "OFEvEfw5", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4.json index ec1ded13ea..00c98624be 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "wAkuJRTLWxGyBU0b", "filament_id": "OFEvEfw5", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P 0.6 HF nozzle.json index bc05757132..066cc81a69 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "dbs29hQSQl9zuWis", "filament_id": "OFEvEfw5", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P HF.json index 1e5eb664ec..9c13b3abb5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "XGNPvS2ps7Xn2fpx", "filament_id": "OFEvEfw5", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P.json index 21ee8da2a6..1125a33164 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "h33iEGZ7wPeBYKYQ", "filament_id": "OFEvEfw5", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5.json index 2b4f6fc95a..27eade4316 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "e58C9MdOWikIbbVR", "filament_id": "OFGxuI0n", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5P.json index b75438e584..4681375016 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "RX2Tg8KpwQpCbkLI", "filament_id": "OFGxuI0n", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4.json index 3379bd5c39..e6e036a4db 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "C4DfYuQgDXIgK7mk", "filament_id": "OFGxuI0n", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4P.json index 07653a9002..e52bc920d8 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PA-CF @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Yu7hL4izNsgDVqMT", "filament_id": "OFGxuI0n", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 HF nozzle.json index e88cbb31c3..f6aa5e7a0b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PC @FF G4 0.6 HF nozzle", - "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "renamed_from": "FlashForge PC @FF G4 0.6 HF nozzle;FlashForge PC FF G4 0.6 HF nozzle", + "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "from": "system", "setting_id": "Tj504IYSj6mUDR6E", "filament_id": "OFWXCbVF", diff --git a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 nozzle.json index 6b1decef09..a4eb9726c5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PC @FF G4 0.6 nozzle", - "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "renamed_from": "FlashForge PC @FF G4 0.6 nozzle;FlashForge PC FF G4 0.6 nozzle", + "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "from": "system", "setting_id": "VfhBf8676qCWatKP", "filament_id": "OFWXCbVF", diff --git a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.8 HF nozzle.json index e1740fb30d..d08b0bb2f7 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4 0.8 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PC @FF G4 0.8 HF nozzle", - "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "renamed_from": "FlashForge PC @FF G4 0.8 HF nozzle;FlashForge PC FF G4 0.8 HF nozzle", + "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "from": "system", "setting_id": "ILBm9zXX5U4Oh82h", "filament_id": "OFWXCbVF", diff --git a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 HF nozzle.json index 11ec475184..70b46e169e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PC @FF G4P 0.6 HF nozzle", - "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "renamed_from": "FlashForge PC @FF G4P 0.6 HF nozzle;FlashForge PC FF G4P 0.6 HF nozzle", + "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "from": "system", "setting_id": "Kj6KWBfSuFALX2sd", "filament_id": "OFWXCbVF", diff --git a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 nozzle.json index 38ca36a685..466e515c74 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PC @FF G4P 0.6 nozzle", - "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "renamed_from": "FlashForge PC @FF G4P 0.6 nozzle;FlashForge PC FF G4P 0.6 nozzle", + "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "from": "system", "setting_id": "XjAM4PMXLCBwdgQf", "filament_id": "OFWXCbVF", diff --git a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.8 HF nozzle.json index dfdda7bfe2..ea43b47767 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PC @FF G4P 0.8 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PC @FF G4P 0.8 HF nozzle", - "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "renamed_from": "FlashForge PC @FF G4P 0.8 HF nozzle;FlashForge PC FF G4P 0.8 HF nozzle", + "inherits": "FusRock S-PAHT @G3U 0.6 Nozzle", "from": "system", "setting_id": "icAIkgRCZAjz6apM", "filament_id": "OFWXCbVF", diff --git a/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5.json index 7157336d3f..0a0fd2d622 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5.json @@ -6,6 +6,9 @@ "setting_id": "3bguiaEtUsS8ULHW", "filament_id": "OFrjacXf", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5P.json index b550ae743f..7d19965089 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PET-CF @FF C5P.json @@ -6,6 +6,9 @@ "setting_id": "W6i9E22BVo11TeCm", "filament_id": "OFrjacXf", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Basic.json b/resources/profiles/Flashforge/filament/Flashforge PETG Basic.json index 3d5c4f4b0c..f257a24995 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Basic.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Basic.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "YLLJ4xZI704GReej", "filament_id": "OFYYeMyQ", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "60" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json index e15f011f1f..3c4126159a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "dFZ1MmHjj1AAIaMm", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json index a3d431030f..a93a6ed04a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Ro3rt7IAJrA5aZD6", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X.json index 7cc361d89d..05e1b984eb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "cTxrnqzr2wVt4Nj7", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF Adventurer A5.json index b1a6a9f7e5..f81aba4130 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "rPy6e6kaIt2tI34j", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "60" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5.json index 0a1b47b916..14dbf52b99 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "QA1KD03F0zj2zsVi", "filament_id": "OFXiArjA", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5P.json index 69cb6ee5e8..2cafbe8043 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "EU8Q0XLjED23MNer", "filament_id": "OFXiArjA", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json index 746eb1cc61..5493fc1566 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "8x6yU2U8d5f67N73", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json index ecafe03349..92e11c5a7b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "4W0nfaSSZdg2HQkh", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json index 94b757887a..ef509a6e8d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "AJcugKx4qHPJ3JAT", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json index 8308064c52..ccd4fedb6e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "R0nZuLXEo5qA6Mt8", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4.json index 8c1de1d947..c2ac1bc1f1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Ql2BBBymzqEG7GKk", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json index 60bb0ae243..f509ebd2e4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "KU5tDHAKja1sCoHm", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json index 24ed205273..83f839dc15 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "sb6jD3UZmb0DNIsC", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json index d993d05592..821f640057 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "4BB1wJLtsXus5eyY", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json index d8bdc53caa..bde4793410 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "m7oJx47UMlFctMkX", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P.json index 1bd2c4cdbf..c478014ab4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ozD2wU5UiORTtJsa", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Pro.json b/resources/profiles/Flashforge/filament/Flashforge PETG Pro.json index df9948d863..ca41082534 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Pro.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Pro.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "IQfUoy7gTmVmBDL5", "filament_id": "OFXiArjA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "60" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json index 2d29ad79b5..ec4cbe4150 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Ht7wzk8l0b1kv5tZ", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json index f1b7a3b4ab..8b1521d82b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "NJFHpa5HFHIyHSWu", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X.json index 252e51750d..b96a53dc08 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "UaObrRNSTwitC6jr", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "close_fan_the_first_x_layers": [ "2" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF Adventurer A5.json index 15ccd1d0ac..864e757268 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "axOWrjnN5lofH9qM", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "60" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5.json index ed8c6fd0bb..6b931f2732 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "TtXy042wtT6nF3WB", "filament_id": "OFwjMiKL", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5P.json index b6395b0325..34271c74c7 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "66OWHhGyuaFISu6v", "filament_id": "OFwjMiKL", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json index 2ab27e8567..0b2fa34dcb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "K8WkJmFy2V1zhYQO", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json index b3c10e9970..723bd68852 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "LLK1hwKZhDU8SaGJ", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json index 8c29f5a466..840424a6ca 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "LaUF2HJtBnpZF7Cd", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json index f38a075dea..3e4dd0451e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "OUToXk8ddS1RPPUK", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4.json index d907e48ab5..f4204e031e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ywff8rI39XKjcocY", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json index 0dfa3dfee2..5c61d8dfde 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "kuCvwo6Phr6Ywhm4", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json index 91c49b1c85..cbb85f11e4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Z2E69w9AevYg15tl", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json index 0ac80ad83a..5ea183e50c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "RkQaxwTjhJK0A3zr", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json index c920f757e5..dbfc255ff1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "YBQTMes2S9iJjKDf", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P.json index 0213d9e14b..e454323a33 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "lCngVWG3q0FWsnrG", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent.json b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent.json index 7502aa35b6..7e7beee06e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG Transparent.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG Transparent.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "3Gv6MJ3RRja5pbOM", "filament_id": "OFwjMiKL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "60" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json index a516f371a2..4b02af402f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "bcqYod61blJRzhK2", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json index 7a51f2615a..3218ae7e22 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "CnFKOi7fFyS8QlKK", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X.json index e401baa389..eaa57a517b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "eKWJW36I5fVHwjWD", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF Adventurer A5.json index c4001061f2..e257f61b10 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "aDSOS4PWssYHk8Fh", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5.json index 52901dd534..3e0640128f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "RXRERfs2oQKewpPS", "filament_id": "OFuFEtKX", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 0.4 nozzle", "Flashforge Creator 5 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5P.json index dda9226bcd..59da2d552d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "8Ns75F5n2fdQ8sDk", "filament_id": "OFuFEtKX", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "compatible_printers": [ "Flashforge Creator 5 Pro 0.4 nozzle", "Flashforge Creator 5 Pro 0.6 nozzle", diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json index 71c68991d0..b01dc6e877 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "4EgMPzlVo1rTeQ1e", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4.json index b0b2ec7360..7106a199cd 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "K9ME1F4oJkPi8jRu", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json index 668e1af37a..67e4d0bcf4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "9jCp0gTjB3Mt95Mj", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "0" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P.json index a0200ebe49..1f40be2ec7 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "d5OleuNNZBJK9vxH", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PETG-CF.json b/resources/profiles/Flashforge/filament/Flashforge PETG-CF.json index 57b297768c..4c6b3b130c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PETG-CF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PETG-CF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "MpG61mwVUtJ7t602", "filament_id": "OFuFEtKX", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PETG-CF" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json index 7c929b1363..044604a134 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "gMmhMDqjmJfAYcbV", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json index 7f66423bbe..98b2473f4c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "0OsrtqfIxrEJMwac", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X.json index f698b05b32..f0d25bf349 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "fuzWVrfZqekMETLK", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF Adventurer A5.json index 6fdc1bdb17..87760ea716 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "HCpI817HAWckXBtk", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5.json index 6893946556..60befa66ee 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "FmUnckQofjunAtwr", "filament_id": "OFJ3F2jm", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5P.json index 9a7c7080a0..aaac7134ad 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "Q0RsVOPLuMByur9c", "filament_id": "OFJ3F2jm", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json index 4ed8203529..7d6df18572 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "R54l7TcwsjdPHvNB", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json index 731b59748d..2a32b29f00 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "MELEwYupDkT2DPxL", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json index 24eb70b646..c740682350 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "uGLvOoPAfksLO43M", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 HF.json index b9ab2a97ec..232a7294d8 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "gGpKvk3rnLuTjOwo", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4.json index 2d81ff10df..fb1e3faa7d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Yopqnj4b5ZVwigGx", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json index 9c6d20e0e0..32ff549bb5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "QEfQrqMwApuSMqih", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json index 1285b05257..61c89f8c95 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "BAPIn3eJAPGpscRJ", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json index 784f6dfd17..be05a3d90e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "44BmRNRb6vlPq8qe", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P HF.json index 4fdcf94869..aa5960059f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ltJbhoAeAec9gxrS", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P.json index 57305d4cc5..736c0f4a41 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "GxdZiXdqns72ibQl", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Basic.json b/resources/profiles/Flashforge/filament/Flashforge PLA Basic.json index 12a8f6cd79..48c4ec6983 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Basic.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Basic.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "5XKGaHUjxHECbnHO", "filament_id": "OFJ3F2jm", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Basic" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json index 4f5eca6889..445ea80872 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "TF6BeOl0patjpPaa", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json index 950effa7cd..b6fbfe419b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "nkYeEBo8NdkJulAP", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X.json index bf6dfb230f..2cce8c7bd8 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "yEDfsOsogfZbNBVX", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF Adventurer A5.json index 2eeb85526c..8547fa026a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "o1Fl6t8nFCKZoj3Q", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5.json index 23bfa9be0c..95b8e02fad 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "xZmQdh487UMtvBRu", "filament_id": "OFMkAW6r", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5P.json index 6f5e1afb0e..d1871c007d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "rc00SOyIg30uE3Da", "filament_id": "OFMkAW6r", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json index 31a99ea10e..6448467d0e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "G2Et7kPHptMESzQ0", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json index 07fe12f973..06de5aed71 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "zsOdmFGBSF9UySMN", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json index 3a778e5472..ed80aad827 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "oxRMuvBMu9qdQWUQ", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 HF.json index 8657a4010e..f644a8ab18 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "5hwNJvvLtb75XBBg", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4.json index c185b26f3d..9b06bfcd58 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "mGj8VEyOnnogpkmF", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json index 9742b8aefc..fd5370bf4a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "JDcRA6apekWLXPvH", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json index 4d3681736e..79fd7a6636 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "b5GJpvKYktP4vZpj", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json index 6eb75a8f52..f4057e2860 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "RjUpQV6iQxTircwj", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P HF.json index 26609fd995..1f181537a2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "9DEZ6SmFdgfluhsR", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P.json index e660d0f569..b5528cac52 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "girTMkusNTfY04rz", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change.json b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change.json index 29f68b0f62..c216b7fd22 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Color Change.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Color Change.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "pCQ2qmeXUyJzP7kS", "filament_id": "OFMkAW6r", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Color Change" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json index d66bf2b24c..7b10963fef 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "y8TNaRebTrmFem10", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json index 65dffd3601..37c76958e0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "qju0AMvvq0B5Glny", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X.json index 1067b50067..b49adc2988 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "o8gGBOEcNvlbZxGW", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF Adventurer A5.json index a833b55331..2347ddf9ad 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "4rpfTTgZrsVDwxI9", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5.json index 2ce8486cb0..407744a897 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "0RkkIcIUFgwOFTBY", "filament_id": "OFJJ0Ar3", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5P.json index 373a81bcdc..7320f6e19c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "9qVabnSl8xfKSIYX", "filament_id": "OFJJ0Ar3", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json index efb7dad130..3bb954210b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "koEC7DteUoXHUd2z", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json index 64b442938c..70e94be7c1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "D69fWcXioFcpoUjC", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json index d20dc55d41..5b3136029c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "rfiQUncdSExEaK0U", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 HF.json index 346dfad0a0..7415d88645 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "WX8lK8efXIVcpjFf", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4.json index 3b999c0734..139be55915 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Tzvo3oILQJc4SQko", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json index 1b8e75eb32..93387df7e9 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Y5gm20O4yCCDIoC0", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json index d39114697f..9b2d3bdae3 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "80vSQxnHfd5ZUy5h", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json index 185440fba4..d8cc2481f4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "UZi7T5VoasmXWyH5", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P HF.json index ec0581df11..265b4f865c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "6UlSb4fqHIMdMxkO", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P.json index c1818186cb..8a87da7aab 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "H2Cr4B5VUaxyYsN0", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy.json b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy.json index 785e26ace5..4e7bc2c581 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Galaxy.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "NJrc0UZ54Fq8MaqF", "filament_id": "OFJJ0Ar3", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Galaxy" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA LITE @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA LITE @FF Adventurer A5.json index 36e0a64d69..dc00b7b598 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA LITE @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA LITE @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "2QZaQyg66IJPbsSc", "filament_id": "OFDDdgHM", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json index 3e106a6eda..301ed1b8c0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "GdvXL8SrKrYHxSgZ", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json index 446137267f..9074bdd547 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "SLYD2YcQTQgbSjIF", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X.json index d605b1e444..3d1da264d5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "kOobFSlqEG9Qe0d1", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF Adventurer A5.json index 0be02b85f5..c81af34a7c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "GqNeJoH4M1IVAXrZ", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5.json index 5efeada6af..66fc70e7ed 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "4sE1LTVVuRglRbpD", "filament_id": "OFdqkWtz", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5P.json index 485a3b51a2..d69b537c6a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "jEUZyaEIBf2eXXeh", "filament_id": "OFdqkWtz", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json index 0b58399215..1f8feef089 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "xPPSRmadqfqCtRF2", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json index 792049300a..e3a3fc5ee1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "aWVXIk1xVa9URR1D", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 HF.json index a218752f68..93632d0992 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "KhBF7hHHVPzqiAca", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4.json index 615e05d2e6..d570838ab4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "sTplnj3gMAzwtLWE", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json index 65e6995584..bb66eccb3a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vXPXOKD8vNJlujM1", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json index 7704d5f2b8..9a99a237a3 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "purqxjmWiflDrnik", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P HF.json index b9f94e604e..f11ea26336 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "qraQ97uusigB63hv", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P.json index 5ce6582146..d96d107b83 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Z1NCX8XMyIVlOlWn", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous.json b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous.json index 46151a4496..7228ed0f99 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Luminous.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Luminous.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "s620OFLTgFT4Ds2A", "filament_id": "OFdqkWtz", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Luminous" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json index 2774450e57..32ec6b37ec 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "BVmVfNCuy8HDhcEI", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json index f03dc70fd1..0fa484f6b6 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "WRMePGzDGdEGiqNv", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X.json index f009759cad..f6b304da2b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "thnbuaLDDlGrkrdY", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF Adventurer A5.json index 33a2228f8d..cc0a51eacf 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Jk7PRQkF2lFEtI8Q", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5.json index 230a723624..a9637b4b2d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5.json @@ -1,15 +1,18 @@ { "type": "filament", "name": "Flashforge PLA Matte @FF C5", - "inherits": "Generic PLA @System", "renamed_from": "Flashforge PLA Matte @FF C5;Flashforge PLA Matte FF C5", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "ct3nO6w9j58gqDI0", "filament_id": "OF6qAuyi", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5P.json index 0d7543cc09..8386a4424a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF C5P.json @@ -1,15 +1,18 @@ { "type": "filament", "name": "Flashforge PLA Matte @FF C5P", - "inherits": "Generic PLA @System", "renamed_from": "Flashforge PLA Matte @FF C5P;Flashforge PLA Matte FF C5P", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "Bn2BaG7f1tkvlyYI", "filament_id": "OF6qAuyi", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json index 2ff2a07363..d3df0a765c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "8b9q1FfVljPmKoEt", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json index f49e19c292..7263fb66b5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "o9dOrLgL6efF19O1", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json index 98e44f21f4..7036ec3ffa 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "QoRmDvhoeGi6Z2xv", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 HF.json index 7eda7a4b62..599e8dc771 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "dHyuoORAUGLtlGkJ", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4.json index 698511967d..a8c257fea1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "OgqVyIHfy3U8Dc6d", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json index c868aa0137..2e8676a2a2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "feXpVbDM5ON5mwg0", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json index fc205bb684..5f9ff2e3bb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "XMnZQ1AxXPJqpqRX", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json index 42dc4c9c15..ef6c9b3010 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Ke0bRKPNKSsVMO1Y", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P HF.json index 1d76131870..0345d9b8a4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "IRC2n4GaofxvvyTt", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P.json index 63d6f372e3..661fd7e800 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "RN4wdTL0qccM4huZ", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Matte.json b/resources/profiles/Flashforge/filament/Flashforge PLA Matte.json index 781357b1a1..b747e3a26b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Matte.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Matte.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ipMevDMORKqZYdvD", "filament_id": "OF6qAuyi", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json index 27caf06739..33f787d3d3 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "uusF7Vz94HOwoQF0", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json index 4f01562a04..2e3bd9c33a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "sHZWzrZO8PP0QYZR", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X.json index f85391cb2b..6bec10ee8d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "bxwjEFI8HmNY8JI6", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF Adventurer A5.json index 1ef06a756b..4cd41a44f7 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Gs8hS5CpV3W62pjs", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5.json index d382637556..35fa843ada 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5.json @@ -1,15 +1,18 @@ { "type": "filament", "name": "Flashforge PLA Metal @FF C5", - "inherits": "Generic PLA @System", "renamed_from": "Flashforge PLA Metal @FF C5;Flashforge PLA Metal FF C5", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "AdjRSTc9RZG6mJ1e", "filament_id": "OFAebKg8", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5P.json index 965b6fe595..fc69dcf2a2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF C5P.json @@ -1,15 +1,18 @@ { "type": "filament", "name": "Flashforge PLA Metal @FF C5P", - "inherits": "Generic PLA @System", "renamed_from": "Flashforge PLA Metal @FF C5P;Flashforge PLA Metal FF C5P", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "k0AQO2dGbk0qvxzO", "filament_id": "OFAebKg8", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json index 8fcf56e6b6..b50b30e1fd 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "5xqdqoj2l50FegPF", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json index 352adaa681..6e8d01fc22 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "R79SbWA9i2OAu2ee", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json index 8d78236629..422abb7e48 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "zjIN4KzIOwI1VwOc", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 HF.json index aaabcaac60..8fbedcac7d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "UxMNNil2KnWvAJ4q", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4.json index b1035a4629..53c81cc9df 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "57i6iKrVYUS5UiBT", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json index bf06971c23..2ce77f2098 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "IYPw8a9tkpuf95uH", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json index 7d85d6e56f..5be845c3cb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "I0bULoVAbtVfQoCy", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json index 9c6e1b92b0..cb7ca9ce1e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "DbPo3ay2e4a002AB", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P HF.json index a79ce03a5b..d386502160 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "uztv4hhm2O3T93zZ", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P.json index 82bf12c247..948e047ffa 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "UFWWrhfgS7N36Y8W", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Metal.json b/resources/profiles/Flashforge/filament/Flashforge PLA Metal.json index 90d419bfa5..4110cc586c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Metal.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Metal.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "UD5i0ijsirfieUvb", "filament_id": "OFAebKg8", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Metal" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json index d56ed06c1e..38e48d781b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "t9lPSFnwLDk0ARIp", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json index 423b8743a7..db4ee0563d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "SBSlOEwZSvZHeX4r", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X.json index 0ab1f650f2..92cf8d55ab 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "DbWTm2H71izMWmpx", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF Adventurer A5.json index 416c8bf207..5f2a38e02c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vTVCr1id0cTtMzuE", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5.json index e02f21dbd3..668707306e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5.json @@ -1,15 +1,18 @@ { "type": "filament", "name": "Flashforge PLA Pro @FF C5", - "inherits": "Generic PLA @System", "renamed_from": "Flashforge PLA Pro @FF C5;Flashforge PLA Pro FF C5", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "30eBjTZFg6vDZkc0", "filament_id": "OFm4SivL", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5P.json index fedd74b2c5..0805a77333 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF C5P.json @@ -1,15 +1,18 @@ { "type": "filament", "name": "Flashforge PLA Pro @FF C5P", - "inherits": "Generic PLA @System", "renamed_from": "Flashforge PLA Pro @FF C5P;Flashforge PLA Pro FF C5P", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "xOvxorpWP37CQCfi", "filament_id": "OFm4SivL", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json index f3dd8e04cf..6012a3cc75 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "YcXuvz3qYHtVoWxv", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json index 7dc8528606..6fa23af370 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "prItyXNphhuPCAce", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json index 57e815ab25..9d518f1c67 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "83zDmjaAgxxIt7KU", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 HF.json index 35bce9d866..31e86195bd 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "px3O28Olb9LExqfT", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4.json index b04f49d81b..a86a8d4c73 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "QYgsCCHP3Khqrzh3", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json index 07b82edf7f..390ccaa53f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "1ro9wHPYhuMHNiYe", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json index 433318fc86..d4829bab74 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "4W4a7c9ugUVwvvmn", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json index 87031ba66b..3902337856 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "CloRo3qxvzxHZuIP", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P HF.json index 281a34a2c5..6f89effb8d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "QgUbP07tIXmFysEb", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P.json index 8d29d1823c..d5b49f18eb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "6mvGOtkPZT6ROboo", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Pro.json b/resources/profiles/Flashforge/filament/Flashforge PLA Pro.json index e70b87f9a9..cf0dd71a81 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Pro.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Pro.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vI875WYbMyQeMwlh", "filament_id": "OFm4SivL", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Pro" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json index b232f00632..1005ecbcf0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5M 0.25 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "gxl3i7jTwkzrKxF4", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Silk @FF AD5M 0.25 nozzle" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json index 3bbc1afcb1..ac59ca225a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "YH9IHXOFMKwcTLyA", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json index 36a3c15a4f..2a55fcc117 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "IfAieG0OAG807xlu", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X.json index ce5ecdb2aa..db75066f14 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "N6J7QqQ7TIgM3MyW", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "50" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF Adventurer A5.json index e157b16c6d..5c7f51a024 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "XXmeUWaLyVCTDS6G", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5.json index de9c9be46a..4ff076c635 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "OIsfpi49wEoF0ekO", "filament_id": "OFgjgN35", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5P.json index f82bc5efc4..996e0c3052 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "xxeZ6VPjRFevxDnK", "filament_id": "OFgjgN35", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json index ec7a71f35f..b1de1db0c9 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "2GZp8yjrY1OioFDi", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json index 36090afaf7..fff6e7d313 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "U0XtCVUhIMnidhbR", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json index 558015cb87..777fd93940 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "8j9kaYy3ghkF81Cu", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 HF.json index c37e0f6341..7286eca6aa 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "E0LeJwSxaniDkB0b", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4.json index b7f4f619ec..46a4b9e268 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "8rggqgJ9kg9yLE28", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json index 047cdcf879..df57e3437e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "uY4OWhIytHMz4rWq", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json index b5f36b7483..dcd315eb34 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "YSkkXd9EhhEHvGpf", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json index a41d10e40a..c2b25925c5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "XlxXZj9Wi1D6IwCE", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P HF.json index e95f7ad1de..fd347929e6 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "IPyXBSnMCAikjI9V", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P.json index df4894cdb1..d11fb0e157 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "f3gJsovSmDKoA7BP", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Silk.json b/resources/profiles/Flashforge/filament/Flashforge PLA Silk.json index 15239129d4..5f4826c112 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Silk.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Silk.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vZb7BvbyVWkZv3rR", "filament_id": "OFgjgN35", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Silk" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json index 3786cf7abb..6c0baf8308 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "o8lsEnMIiHHorJhb", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json index c7fb93bca2..017caafcf1 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "oXlxQJY0K6Dnri7e", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X.json index b6802db1b4..834976ea9a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "XKpFulrvvrfE56va", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF Adventurer A5.json index b7954c6677..f9983c2e2e 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "dscnwSfbrGWiS4Um", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json index 5cf32f2c38..1871eeddf9 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "yeh5cd0tAHtHzdoQ", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json index 27380eb9e7..4a227d08f0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "q2Zi0YluaYpG3Ktf", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 HF.json index 42df4a0ea9..60e1fa25d4 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4 HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "1qXV6AJqPpAwX1YK", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4.json index 7a11476c06..dd14fdd6ce 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "YsyGGOGqUVkEqkIr", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json index 4a975e6f20..044d335abb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "UVvd018dTbygqTgy", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json index 0781dd641f..a064b07063 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "F0k8kkgWM5FkLAzo", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P HF.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P HF.json index 9b4065c982..0b5677dffd 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P HF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P HF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Oapl8InwbkwNSIDl", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P.json index 35ccf42632..65552aff78 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "NiB6Yb4b0auyn9KQ", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle.json b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle.json index 4be3dba6ea..5f91c27894 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA Sparkle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "LYtdPgec1hBLhoQA", "filament_id": "OFV5c8hG", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA Sparkle" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json index 245e401283..a6f9bfe060 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "QRyISvTy06kCwxKo", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json index f456d8c7db..0fe961c8dd 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "rmnF24E3SuwzRscH", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X.json index a39646f621..c167401434 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "BXPI5Pkp7a6pLrCh", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF Adventurer A5.json index 542045cdeb..6589ef2776 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "EpC2ItdGUxFV7x1y", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5.json index a1b271569e..ef53b045ca 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "rBm25DRY1PAkEJ4r", "filament_id": "OF9cAwMK", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5P.json index 189dba715a..4860f2c41f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "xReo12oteZ4ECNJN", "filament_id": "OF9cAwMK", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json index 292cf5972c..34eec41e5c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "9PgjgxU7pLl2Dfpe", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4.json index 0faba78623..0a3aff8808 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "RuNKzuIsw7F1ogmG", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json index 77a590f1d6..036e937e59 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "YPuMCHNGDWh0FpIB", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P.json index 3bd2e72000..5c2741e7a0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "3uC056Y171ZjnQE6", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-CF.json b/resources/profiles/Flashforge/filament/Flashforge PLA-CF.json index 10f87a860a..418e644f56 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-CF.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-CF.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "JxNlb64lTODaaQhU", "filament_id": "OF9cAwMK", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge PLA-CF" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json index 4242f0f8a5..315d522084 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PLA-SILK @FF AD5M 0.25 Nozzle.json @@ -4,10 +4,10 @@ "inherits": "Generic PLA-Silk @Flashforge", "from": "system", "filament_id": "OFV8Mxqx", + "instantiation": "false", "filament_vendor": [ "Flashforge" ], - "instantiation": "false", "compatible_printers": [ "Flashforge Adventurer 5M 0.25 Nozzle", "Flashforge Adventurer 5M Pro 0.25 Nozzle" diff --git a/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5.json index e559b22a88..cef2cbbfa0 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5.json @@ -6,6 +6,9 @@ "setting_id": "DhC7iFgNKCAq4Zkt", "filament_id": "OFLC1oRH", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5P.json index 96fa32ad12..25ecaebd67 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPA-CF @FF C5P.json @@ -6,6 +6,9 @@ "setting_id": "Jws2AaLWaNyZhqX4", "filament_id": "OFLC1oRH", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 HF nozzle.json index 3df5398f11..11277a4ffa 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS @FF G4 0.6 HF nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS @FF G4 0.6 HF nozzle;FlashForge PPS FF G4 0.6 HF nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "5x1ye2DAm3GvzmZJ", "filament_id": "OFlgMgNM", diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 nozzle.json index 1de4d51745..5eced86546 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS @FF G4 0.6 nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS @FF G4 0.6 nozzle;FlashForge PPS FF G4 0.6 nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "yZoLC24CeKEyvkgA", "filament_id": "OFlgMgNM", diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.8 HF nozzle.json index e8014ddfec..c43b7b3290 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4 0.8 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS @FF G4 0.8 HF nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS @FF G4 0.8 HF nozzle;FlashForge PPS FF G4 0.8 HF nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "EsrSpDB3Kx35qb76", "filament_id": "OFlgMgNM", diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4.json index fd2f854067..1aab3f1755 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "6NjEQ6RJKUAOrSLw", "filament_id": "OFlgMgNM", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 HF nozzle.json index f731181d65..fd9323cc7d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS @FF G4P 0.6 HF nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS @FF G4P 0.6 HF nozzle;FlashForge PPS FF G4P 0.6 HF nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "Uu82gm86ESeidnRT", "filament_id": "OFlgMgNM", diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 nozzle.json index 3eab34befc..ef12c6a66d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS @FF G4P 0.6 nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS @FF G4P 0.6 nozzle;FlashForge PPS FF G4P 0.6 nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "G6pIMZA5RC15kJoC", "filament_id": "OFlgMgNM", diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.8 HF nozzle.json index a2662d8cc9..7c48a9f82a 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P 0.8 HF nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS @FF G4P 0.8 HF nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS @FF G4P 0.8 HF nozzle;FlashForge PPS FF G4P 0.8 HF nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "SsK15iSJxrQWI5wy", "filament_id": "OFlgMgNM", diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P.json index b841f62e6c..294fe8d4eb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "vFMKqNjQjlNxwvDI", "filament_id": "OFlgMgNM", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_chamber_temp_control": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5.json index 58b2d242a8..ce58dc7c7f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5.json @@ -6,6 +6,9 @@ "setting_id": "ihXPnFERMjbBgrP5", "filament_id": "OFTSXxzE", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5P.json index 5f261953b3..7b8cab5254 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF C5P.json @@ -6,6 +6,9 @@ "setting_id": "UWFjBmSpUkZLBvoO", "filament_id": "OFTSXxzE", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4 0.6 nozzle.json index b33fcb95c9..0ca1140813 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS-CF @FF G4 0.6 nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS-CF @FF G4 0.6 nozzle;FlashForge PPS-CF FF G4 0.6 nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "mMTi9QaW5xVch3an", "filament_id": "OFTSXxzE", diff --git a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4P 0.6 nozzle.json index 48edb216c5..fabbaf7068 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge PPS-CF @FF G4P 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Flashforge PPS-CF @FF G4P 0.6 nozzle", - "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "renamed_from": "FlashForge PPS-CF @FF G4P 0.6 nozzle;FlashForge PPS-CF FF G4P 0.6 nozzle", + "inherits": "FusRock PET-CF @G3U 0.6 Nozzle", "from": "system", "setting_id": "dSI79hoaa9jLGvhz", "filament_id": "OFTSXxzE", diff --git a/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5.json index 90d94b9c29..ca3216eef5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "rSYGG2ni41NDVw6l", "filament_id": "OFaaddbQ", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5P.json index 03fdb6117e..6348ec601f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge PVA @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "nwgbMjLRJLtJ04ri", "filament_id": "OFaaddbQ", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge R PLA @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge R PLA @FF Adventurer A5.json index e5511d5622..c17d507b4f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge R PLA @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge R PLA @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "sN7eGcbuGZxGrbR5", "filament_id": "OFT02Lz9", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json index 1514862e44..725349ad2d 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "f75oElm4zB0hukIj", "filament_id": "OFSDfduA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json index d6fda96505..7298c982fe 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "o4KYTpJF6KksX2mg", "filament_id": "OFSDfduA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json index 27d6515ccb..9c710563ed 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "HUSkDZL6rCpz0lRk", "filament_id": "OFSDfduA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json index 7db519170a..f96b992d49 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "8xgu0AnMuKbPWyVd", "filament_id": "OFSDfduA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json index 2123c33993..73df34ec44 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "Rgqt3MjxOye5EaFt", "filament_id": "OFSDfduA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json index a5ce644702..65e0df12a8 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 65D @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "PBFsW5qhVbQteYh5", "filament_id": "OFSDfduA", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json index 897054d8ee..7fd3fce86f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "TPbHmcFyPyjvoERv", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json index adb4820faa..474c793788 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X 0.8 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "zLMgsyDmdoXHhqFv", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X.json index 5c5f690cd2..8233c9eab7 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF AD5X.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ThakVhjfpgnAlEVH", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF Adventurer A5.json index 19b0981798..e8c9ee8f67 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "2MT9C2rvvQ3uU1lG", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "cool_plate_temp": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json index b67887cc8b..b244df24ce 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "M0ozqaD3jSKoD6fm", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json index ae6049673b..fd12c0a3e8 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "ob8IkvzNt9CWCzbk", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json index 37bef9c3f6..792a504a01 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "NzxX1lyRJ7wLUihV", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4.json index c5b24e9e04..083214475b 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "4FIGiheSGvSJPw3s", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json index 23cd8d6326..0ebf8ad04c 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "1GNqSBaQitzhYSx7", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json index eb2a423bca..441792c4d5 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.6 nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "eOhMygyxaccdov7o", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json index f4b91222e7..5e41834400 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P 0.8 HF nozzle.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "LxooKiOkRncktNLf", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P.json index 9e675ccd52..656106c830 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A @FF G4P.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "HdoJfbQr0uwQ6Vwb", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU 95A.json b/resources/profiles/Flashforge/filament/Flashforge TPU 95A.json index aa2f6251dc..1d1ea62a65 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU 95A.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU 95A.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "J4EaFhnpkLDcl5wH", "filament_id": "OFSqIcJC", + "instantiation": "true", "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "filament_settings_id": [ "Flashforge TPU 95A" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5.json index 5a4e304862..7098dd4ac2 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "fd5bACFa33J7aTdp", "filament_id": "OF8GtyKJ", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5P.json index 428afe7f1c..80b1f9964f 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU-64D @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "hrcELA2qEMkZ6Wvj", "filament_id": "OF8GtyKJ", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5.json index 407e92aed8..6faa7d3a58 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "Lis7BZ3lMkoX5KQt", "filament_id": "OFwlZ7gH", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5P.json index 611724b460..a2dc8ab5fb 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU-90A @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "xY03Hiidu5YNSUyZ", "filament_id": "OFwlZ7gH", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5.json b/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5.json index 0c27bb94c6..69e930a3ff 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "AHu6wNV3zcPBusOF", "filament_id": "OFx0WlzS", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "additional_cooling_fan_speed": [ "40" ], diff --git a/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5P.json b/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5P.json index e3b05721e6..bf11fa31ae 100644 --- a/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Flashforge TPU-95A @FF C5P.json @@ -5,10 +5,13 @@ "from": "system", "setting_id": "8MBRqfLIRdhxk1dF", "filament_id": "OFx0WlzS", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Flashforge" ], - "instantiation": "true", "activate_air_filtration": [ "1" ], diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5.json index 5ad0cca8f6..31c5d807d4 100644 --- a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5.json +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5.json @@ -1,12 +1,15 @@ { "type": "filament", "name": "FusRock PAHT-CF @FF C5", - "inherits": "Generic PA-CF @System", "renamed_from": "Flashforge PAHT-CF @FF C5;Flashforge PAHT-CF FF C5", + "inherits": "Generic PA-CF @System", "from": "system", "setting_id": "gZqAGVOlWR79n7hN", "filament_id": "OFKW5hEW", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "FusRock" ], diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5P.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5P.json index b23f871add..952f16aa4e 100644 --- a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5P.json +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF C5P.json @@ -1,12 +1,15 @@ { "type": "filament", "name": "FusRock PAHT-CF @FF C5P", - "inherits": "Generic PA-CF @System", "renamed_from": "Flashforge PAHT-CF @FF C5P;Flashforge PAHT-CF FF C5P", + "inherits": "Generic PA-CF @System", "from": "system", "setting_id": "nJF1lCOavNNh4yHs", "filament_id": "OFKW5hEW", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "FusRock" ], diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4.json index 2fb2e00e21..0a963b57ac 100644 --- a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4.json +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PAHT-CF @FF G4", - "inherits": "Generic PLA-CF10 @Flashforge", "renamed_from": "Flashforge PAHT-CF @FF G4;Flashforge PAHT-CF FF G4", + "inherits": "Generic PLA-CF10 @Flashforge", "from": "system", "setting_id": "nH6pwFYsPyBzL1EB", "filament_id": "OFKW5hEW", diff --git a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P.json b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P.json index 263323a60a..d4f32a7962 100644 --- a/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P.json +++ b/resources/profiles/Flashforge/filament/FusRock PAHT-CF @FF G4P.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PAHT-CF @FF G4P", - "inherits": "Generic PLA-CF10 @Flashforge", "renamed_from": "Flashforge PAHT-CF @FF G4P;Flashforge PAHT-CF FF G4P", + "inherits": "Generic PLA-CF10 @Flashforge", "from": "system", "setting_id": "wmWMf3MfmbfZx2o8", "filament_id": "OFKW5hEW", diff --git a/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5.json b/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5.json index c5d429456d..e76983e211 100644 --- a/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5.json +++ b/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5.json @@ -6,6 +6,9 @@ "setting_id": "O3tz36NNMoagELL0", "filament_id": "OF0AquDh", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "FusRock" ], diff --git a/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5P.json b/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5P.json index bb1ccc7292..5ee5ad5303 100644 --- a/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5P.json +++ b/resources/profiles/Flashforge/filament/FusRock S-Multi @FF C5P.json @@ -6,6 +6,9 @@ "setting_id": "Gg9H6I32fOqoLSqE", "filament_id": "OF0AquDh", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "FusRock" ], diff --git a/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5.json b/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5.json index b895fd4370..148f941f09 100644 --- a/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5.json +++ b/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5.json @@ -6,6 +6,9 @@ "setting_id": "pV5QERvRuROIZTOa", "filament_id": "OFCn83wF", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "FusRock" ], diff --git a/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5P.json b/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5P.json index 6845961090..1237e3d98b 100644 --- a/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5P.json +++ b/resources/profiles/Flashforge/filament/FusRock S-PAHT @FF C5P.json @@ -6,6 +6,9 @@ "setting_id": "0i7VkquM4n0uFaXH", "filament_id": "OFCn83wF", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "FusRock" ], diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF @G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF @G3U 0.6 Nozzle.json index b1112d508d..2ac906fb34 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF @G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-CF @G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PAHT-CF @G3U 0.6 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic PAHT-CF @G3U 0.6 Nozzle;FusRock Generic PAHT-CF G3U 0.6 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "axB3SEA3AC7rmxiZ", "filament_id": "OFKW5hEW", diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-GF.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-GF.json index 0e29324831..6f2d0dddb1 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-GF.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PAHT-GF.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PAHT-GF", - "inherits": "FusRock PAHT-CF", "renamed_from": "FusRock Generic PAHT-GF", + "inherits": "FusRock PAHT-CF", "from": "system", "setting_id": "yJJEULB0ra4GAS8Q", "filament_id": "OFcVLpNA", diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF @G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF @G3U 0.6 Nozzle.json index b82f7ef4a9..e0ee54b6b3 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF @G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-CF @G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PET-CF @G3U 0.6 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic PET-CF @G3U 0.6 Nozzle;FusRock Generic PET-CF G3U 0.6 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "Gyw0XH6UtYQqtgx9", "filament_id": "OFDu1qE7", diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-GF.json b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-GF.json index 6a224aded2..c886d48276 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock PET-GF.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock PET-GF.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock PET-GF", - "inherits": "FusRock PET-CF", "renamed_from": "FusRock Generic PET-GF", + "inherits": "FusRock PET-CF", "from": "system", "setting_id": "ZFIkUVZOklX8jUrT", "filament_id": "OFzwA5Z9", diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi @G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi @G3U 0.6 Nozzle.json index 80f5577529..8ffe7ef103 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi @G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock S-Multi @G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock S-Multi @G3U 0.6 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic S-Multi @G3U 0.6 Nozzle;FusRock Generic S-Multi G3U 0.6 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "HvimUHzfNcDRrUBq", "filament_id": "OF0AquDh", diff --git a/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT @G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT @G3U 0.6 Nozzle.json index 858da9c1bb..653f47de7c 100644 --- a/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT @G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/FusRock/FusRock S-PAHT @G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FusRock S-PAHT @G3U 0.6 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "FusRock Generic S-PAHT @G3U 0.6 Nozzle;FusRock Generic S-PAHT G3U 0.6 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "JUiz70mbp7RRSPia", "filament_id": "OFCn83wF", diff --git a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U 0.6 Nozzle.json index 0176ef471f..18dbc7b49c 100644 --- a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Flashforge G3U 0.6 Nozzle", - "inherits": "Generic ABS @Flashforge", "renamed_from": "Flashforge Generic ABS @G3U 0.6 Nozzle;Flashforge Generic ABS G3U 0.6 Nozzle", + "inherits": "Generic ABS @Flashforge", "from": "system", "setting_id": "tzuKCtXYbGw6WB2c", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge.json b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge.json index a7cfc16967..0c7fdf561e 100644 --- a/resources/profiles/Flashforge/filament/Generic ABS @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic ABS @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Flashforge", - "inherits": "fdm_filament_abs", "renamed_from": "Flashforge Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "CJXM3PoVEjf4kYnz", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json index 3ecb1b1c67..3213e52e71 100644 --- a/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic ASA @Flashforge G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Flashforge G3U 0.6 Nozzle", - "inherits": "Generic ASA @Flashforge", "renamed_from": "Flashforge Generic ASA @G3U 0.6 Nozzle;Flashforge Generic ASA G3U 0.6 Nozzle", + "inherits": "Generic ASA @Flashforge", "from": "system", "setting_id": "9wfcw1ifKVGOXx5G", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Flashforge/filament/Generic BVOH @FF C5.json b/resources/profiles/Flashforge/filament/Generic BVOH @FF C5.json index 0e77a94bd8..11ca1a9d74 100644 --- a/resources/profiles/Flashforge/filament/Generic BVOH @FF C5.json +++ b/resources/profiles/Flashforge/filament/Generic BVOH @FF C5.json @@ -34,6 +34,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "3.5" ], diff --git a/resources/profiles/Flashforge/filament/Generic BVOH @FF C5P.json b/resources/profiles/Flashforge/filament/Generic BVOH @FF C5P.json index 6679b74a66..b6cd31a55a 100644 --- a/resources/profiles/Flashforge/filament/Generic BVOH @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Generic BVOH @FF C5P.json @@ -37,6 +37,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "3.5" ], diff --git a/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge G3U 0.6 Nozzle.json index 84c43def44..0948b4b9a8 100644 --- a/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic HIPS @Flashforge G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic HIPS @Flashforge G3U 0.6 Nozzle", - "inherits": "Generic ABS @Flashforge", "renamed_from": "Flashforge Generic HIPS @G3U 0.6 Nozzle;Flashforge Generic HIPS G3U 0.6 Nozzle", + "inherits": "Generic ABS @Flashforge", "from": "system", "setting_id": "wsAmSziSQ4UEHucg", "filament_id": "OFsFon5l", diff --git a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json index 77095049c2..25366c54fb 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Flashforge G3U 0.6 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "Flashforge Generic PETG @G3U 0.6 Nozzle;Flashforge Generic PETG G3U 0.6 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "ptfqxSWRVMFXRqzD", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json index f0ebbde186..f97a46088d 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge G3U 0.8 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Flashforge G3U 0.8 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "Flashforge Generic PETG @G3U 0.8 Nozzle;Flashforge Generic PETG G3U 0.8 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "UhrHMgzzppLirT8M", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge.json index b53946e06c..6cf3196412 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic PETG @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Flashforge", - "inherits": "fdm_filament_pet", "renamed_from": "Flashforge Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "pd9YWgt8IGXdiiUV", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json index a44330253e..85e6d41043 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Flashforge G3U 0.6 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "Flashforge Generic PETG-CF @G3U 0.6 Nozzle;Flashforge Generic PETG-CF G3U 0.6 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "xYtwo7Ddkfh5PLIz", "filament_id": "OFoYSJKi", diff --git a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json index 3f5f92e8bc..76d477a95e 100644 --- a/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PETG-CF @Flashforge G3U 0.8 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Flashforge G3U 0.8 Nozzle", - "inherits": "Generic PETG @Flashforge", "renamed_from": "Flashforge Generic PETG-CF @G3U 0.8 Nozzle;Flashforge Generic PETG-CF G3U 0.8 Nozzle", + "inherits": "Generic PETG @Flashforge", "from": "system", "setting_id": "v3HCxK10mQARiRTZ", "filament_id": "OFoYSJKi", diff --git a/resources/profiles/Flashforge/filament/Generic PLA @FF C5.json b/resources/profiles/Flashforge/filament/Generic PLA @FF C5.json index 12f0d129bc..df25efccb9 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA @FF C5.json +++ b/resources/profiles/Flashforge/filament/Generic PLA @FF C5.json @@ -49,6 +49,9 @@ "filament_cooling_moves": [ "2" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_loading_speed": [ "10" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA @FF C5P.json b/resources/profiles/Flashforge/filament/Generic PLA @FF C5P.json index 0f9ccae55c..e7e3e0d186 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Generic PLA @FF C5P.json @@ -43,6 +43,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "18" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge.json index 2a7b642470..8c8984059c 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic PLA @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Flashforge", - "inherits": "fdm_filament_pla", "renamed_from": "Flashforge Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "keWbSonGBWos68ag", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5.json b/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5.json index 2087257bcb..18e926c6b1 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5.json +++ b/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5.json @@ -40,6 +40,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "12" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5P.json b/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5P.json index a5de4c8f4a..f2987ca9bf 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Generic PLA Silk @FF C5P.json @@ -43,6 +43,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "12" ], diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json index af864f7f8e..cb0f27a120 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.6 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Flashforge G3U 0.6 Nozzle", - "inherits": "Generic PLA @Flashforge", "renamed_from": "Flashforge Generic PLA-CF @G3U 0.6 Nozzle;Flashforge Generic PLA-CF G3U 0.6 Nozzle", + "inherits": "Generic PLA @Flashforge", "from": "system", "setting_id": "3vXm1hn43igE1xww", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json index 798dff9458..9b43dfadac 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json +++ b/resources/profiles/Flashforge/filament/Generic PLA-CF @Flashforge G3U 0.8 Nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Flashforge G3U 0.8 Nozzle", - "inherits": "Generic PLA @Flashforge", "renamed_from": "Flashforge Generic PLA-CF @G3U 0.8 Nozzle;Flashforge Generic PLA-CF G3U 0.8 Nozzle", + "inherits": "Generic PLA @Flashforge", "from": "system", "setting_id": "f1rqvqunGS94fw7q", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Flashforge/filament/Generic PLA-Silk @Flashforge.json b/resources/profiles/Flashforge/filament/Generic PLA-Silk @Flashforge.json index d8eabacaa0..f831b9b690 100644 --- a/resources/profiles/Flashforge/filament/Generic PLA-Silk @Flashforge.json +++ b/resources/profiles/Flashforge/filament/Generic PLA-Silk @Flashforge.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-Silk @Flashforge", - "inherits": "fdm_filament_pla", "renamed_from": "Flashforge Generic PLA-Silk", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "TPRkxgDXxVhPC1ws", "filament_id": "OFi6PfUM", diff --git a/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5.json b/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5.json index d34dc09ee4..ffd86b3f25 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5.json +++ b/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5.json @@ -41,6 +41,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "1.02" ], diff --git a/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5P.json b/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5P.json index 7b90c39711..499a3b0658 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Generic TPU-64D @FF C5P.json @@ -44,6 +44,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "1.02" ], diff --git a/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5.json b/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5.json index de84158ff1..4e57706c46 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5.json +++ b/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5.json @@ -41,6 +41,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "1.02" ], diff --git a/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5P.json b/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5P.json index dae60389c1..597b919fbe 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Generic TPU-90A @FF C5P.json @@ -44,6 +44,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "1.02" ], diff --git a/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5.json b/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5.json index 66f0535b0b..9f7dcd3e03 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5.json +++ b/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5.json @@ -41,6 +41,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "1.02" ], diff --git a/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5P.json b/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5P.json index f44c131661..eaa6eacd93 100644 --- a/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5P.json +++ b/resources/profiles/Flashforge/filament/Generic TPU-95A @FF C5P.json @@ -44,6 +44,9 @@ "fan_min_speed": [ "70" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "1.02" ], diff --git a/resources/profiles/Flashforge/filament/Kexcelled TPU 64D @FF Adventurer A5.json b/resources/profiles/Flashforge/filament/Kexcelled TPU 64D @FF Adventurer A5.json index 285af63564..95de8ab8b2 100644 --- a/resources/profiles/Flashforge/filament/Kexcelled TPU 64D @FF Adventurer A5.json +++ b/resources/profiles/Flashforge/filament/Kexcelled TPU 64D @FF Adventurer A5.json @@ -5,10 +5,10 @@ "from": "system", "setting_id": "OB4I8nwZn8sCcCcF", "filament_id": "OF20zavY", + "instantiation": "true", "filament_vendor": [ "Kexcelled" ], - "instantiation": "true", "cool_plate_temp": [ "40" ], diff --git a/resources/profiles/Flashforge/flashforge_c5_buildplate_model.stl b/resources/profiles/Flashforge/flashforge_c5_buildplate_model.stl index b535cc4e98..af24406f2d 100644 Binary files a/resources/profiles/Flashforge/flashforge_c5_buildplate_model.stl and b/resources/profiles/Flashforge/flashforge_c5_buildplate_model.stl differ diff --git a/resources/profiles/Flashforge/flashforge_c5_buildplate_texture.png b/resources/profiles/Flashforge/flashforge_c5_buildplate_texture.png deleted file mode 100644 index a5af30d0c5..0000000000 Binary files a/resources/profiles/Flashforge/flashforge_c5_buildplate_texture.png and /dev/null differ diff --git a/resources/profiles/Flashforge/flashforge_c5_buildplate_texture.svg b/resources/profiles/Flashforge/flashforge_c5_buildplate_texture.svg new file mode 100644 index 0000000000..55fb96abfa --- /dev/null +++ b/resources/profiles/Flashforge/flashforge_c5_buildplate_texture.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series 0.6 nozzle.json index 357e50666a..fe24c8c825 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Adventurer 4 Series 0.6 nozzle.json @@ -22,9 +22,11 @@ ], "host_type": "flashforge", "machine_max_acceleration_extruding": [ + "5000", "5000" ], "machine_max_speed_z": [ + "30", "30" ] } diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json index c3cb7aa570..3f49f72c9e 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.25 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json index 474e697fa1..bb59171e96 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.4 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json index a10c65d83e..21aee9e9a1 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.6 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json index 0e3a29a2ad..1e4a9ced6c 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 0.8 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json index 911c09f29c..5faaefa754 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.25 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json index ec69837a3a..644248c9af 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.4 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json index d3d189d4e9..4a6f4db2f8 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.6 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json index e596675ad0..bcd21f54e9 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro 0.8 nozzle.json @@ -70,66 +70,162 @@ "machine_end_gcode": ";end_gcode\nG1 X150 Y150 E-1.2 F12000", "machine_load_filament_time": "0", "machine_max_acceleration_e": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", + "5000", + "5000", + "5000", + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", + "20000", + "20000", + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_x": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_y": [ + "30000", + "20000", + "30000", + "20000", + "30000", + "20000", "30000", "20000" ], "machine_max_acceleration_z": [ + "300", + "500", + "300", + "500", + "300", + "500", "300", "500" ], "machine_max_jerk_e": [ + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", + "9", + "9", + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", + "3", + "3", + "3", + "3", "3", "3" ], "machine_max_junction_deviation": [ + "0", + "0", + "0", + "0", + "0", + "0", "0", "0" ], "machine_max_speed_e": [ + "30", + "30", + "30", + "30", + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_y": [ + "600", + "600", + "600", + "600", + "600", + "600", "600", "600" ], "machine_max_speed_z": [ + "20", + "20", + "20", + "20", + "20", + "20", "20", "20" ], @@ -168,8 +264,18 @@ ], "nozzle_height": "4", "nozzle_hrc": "0", - "nozzle_type": "hardened_steel", - "nozzle_volume": "0", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], + "nozzle_volume": [ + "0", + "0", + "0", + "0" + ], "parking_pos_retraction": "0", "pellet_modded_printer": "0", "preferred_orientation": "0", diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json index c33735a4bb..329aec09d9 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json @@ -6,7 +6,7 @@ "machine_tech": "FFF", "family": "Flashforge", "bed_model": "flashforge_c5_buildplate_model.stl", - "bed_texture": "flashforge_c5_buildplate_texture.png", + "bed_texture": "flashforge_c5_buildplate_texture.svg", "hotend_model": "", "default_materials": "Generic PLA @System;Generic PLA @FF C5P" } diff --git a/resources/profiles/Flashforge/machine/Flashforge Creator 5.json b/resources/profiles/Flashforge/machine/Flashforge Creator 5.json index 358cd4aaee..8512bdab4a 100644 --- a/resources/profiles/Flashforge/machine/Flashforge Creator 5.json +++ b/resources/profiles/Flashforge/machine/Flashforge Creator 5.json @@ -6,7 +6,7 @@ "machine_tech": "FFF", "family": "Flashforge", "bed_model": "flashforge_c5_buildplate_model.stl", - "bed_texture": "flashforge_c5_buildplate_texture.png", + "bed_texture": "flashforge_c5_buildplate_texture.svg", "hotend_model": "", "default_materials": "Generic PLA @System;Generic PLA @FF C5" } diff --git a/resources/profiles/FlyingBear.json b/resources/profiles/FlyingBear.json index 8c09e115e2..04dac46c58 100644 --- a/resources/profiles/FlyingBear.json +++ b/resources/profiles/FlyingBear.json @@ -1,6 +1,6 @@ { "name": "FlyingBear", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "1", "description": "FlyingBear configurations", "machine_model_list": [ diff --git a/resources/profiles/FlyingBear/filament/Generic ABS @FlyingBear.json b/resources/profiles/FlyingBear/filament/Generic ABS @FlyingBear.json index b0de37a64b..c35e6def0c 100644 --- a/resources/profiles/FlyingBear/filament/Generic ABS @FlyingBear.json +++ b/resources/profiles/FlyingBear/filament/Generic ABS @FlyingBear.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @FlyingBear", - "inherits": "fdm_filament_abs", "renamed_from": "FlyingBear Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "2aW5bka7pvQhHGqF", "filament_id": "OFY9muEs", diff --git a/resources/profiles/FlyingBear/filament/Generic PA-CF @FlyingBear.json b/resources/profiles/FlyingBear/filament/Generic PA-CF @FlyingBear.json index 37448910ed..6a21bf1f04 100644 --- a/resources/profiles/FlyingBear/filament/Generic PA-CF @FlyingBear.json +++ b/resources/profiles/FlyingBear/filament/Generic PA-CF @FlyingBear.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @FlyingBear", - "inherits": "fdm_filament_pa", "renamed_from": "FlyingBear Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "5hw49IVGTMbie2Zr", "filament_id": "OFQLcbps", diff --git a/resources/profiles/FlyingBear/filament/Generic PC @FlyingBear.json b/resources/profiles/FlyingBear/filament/Generic PC @FlyingBear.json index 926494718b..91a4def417 100644 --- a/resources/profiles/FlyingBear/filament/Generic PC @FlyingBear.json +++ b/resources/profiles/FlyingBear/filament/Generic PC @FlyingBear.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @FlyingBear", - "inherits": "fdm_filament_pc", "renamed_from": "FlyingBear Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "HU6kkNtEXGubYV0U", "filament_id": "OFLakOUI", diff --git a/resources/profiles/FlyingBear/filament/Generic PETG @FlyingBear.json b/resources/profiles/FlyingBear/filament/Generic PETG @FlyingBear.json index 77079afc33..c14cb5258f 100644 --- a/resources/profiles/FlyingBear/filament/Generic PETG @FlyingBear.json +++ b/resources/profiles/FlyingBear/filament/Generic PETG @FlyingBear.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @FlyingBear", - "inherits": "fdm_filament_pet", "renamed_from": "FlyingBear Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "D5Zk6ykY8TX3gs0Z", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/FlyingBear/filament/Generic PLA @FlyingBear.json b/resources/profiles/FlyingBear/filament/Generic PLA @FlyingBear.json index 159f3da22b..b62cae5202 100644 --- a/resources/profiles/FlyingBear/filament/Generic PLA @FlyingBear.json +++ b/resources/profiles/FlyingBear/filament/Generic PLA @FlyingBear.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @FlyingBear", - "inherits": "fdm_filament_pla", "renamed_from": "FlyingBear Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "g7zPgD6P3bbwm5gv", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/FlyingBear/filament/Generic TPU @FlyingBear.json b/resources/profiles/FlyingBear/filament/Generic TPU @FlyingBear.json index c33b3757be..8b462ad936 100644 --- a/resources/profiles/FlyingBear/filament/Generic TPU @FlyingBear.json +++ b/resources/profiles/FlyingBear/filament/Generic TPU @FlyingBear.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @FlyingBear", - "inherits": "fdm_filament_tpu", "renamed_from": "FlyingBear Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "Xdx2FIIQiqSz7DpN", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/FlyingBear/filament/Ghost7/FlyingBear PLA Basic @Ghost7.json b/resources/profiles/FlyingBear/filament/Ghost7/FlyingBear PLA Basic @Ghost7.json index 85a926f7e9..01adb95891 100644 --- a/resources/profiles/FlyingBear/filament/Ghost7/FlyingBear PLA Basic @Ghost7.json +++ b/resources/profiles/FlyingBear/filament/Ghost7/FlyingBear PLA Basic @Ghost7.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "FlyingBear PLA Basic @Ghost7", - "inherits": "fdm_filament_pla @Ghost7", "renamed_from": "FlyingBear PLA @Ghost7", + "inherits": "fdm_filament_pla @Ghost7", "from": "system", "setting_id": "3JBTG6IDrBCnvIhf", "filament_id": "OF3fwO8b", diff --git a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json index fd14f77ebf..9f195a4eca 100644 --- a/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json +++ b/resources/profiles/FlyingBear/machine/Ghost7/FlyingBear Ghost7 0.4 nozzle.json @@ -198,6 +198,6 @@ "0.4" ], "z_hop_types": [ - "Normal Lift" + "Auto Lift" ] } diff --git a/resources/profiles/InfiMech.json b/resources/profiles/InfiMech.json index 78c54e0b4d..fb8e63b962 100644 --- a/resources/profiles/InfiMech.json +++ b/resources/profiles/InfiMech.json @@ -1,6 +1,6 @@ { "name": "InfiMech", - "version": "02.04.00.06", + "version": "02.04.00.07", "force_update": "1", "description": "InfiMech configurations", "machine_model_list": [ diff --git a/resources/profiles/InfiMech/filament/Generic ABS @InfiMech.json b/resources/profiles/InfiMech/filament/Generic ABS @InfiMech.json index 80b479de75..305a441fac 100644 --- a/resources/profiles/InfiMech/filament/Generic ABS @InfiMech.json +++ b/resources/profiles/InfiMech/filament/Generic ABS @InfiMech.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @InfiMech", - "inherits": "fdm_filament_abs", "renamed_from": "InfiMech Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "HRLECASD9Ko4Xxof", "filament_id": "OFY9muEs", diff --git a/resources/profiles/InfiMech/filament/Generic PA-CF @InfiMech.json b/resources/profiles/InfiMech/filament/Generic PA-CF @InfiMech.json index 0c202c609c..162e322696 100644 --- a/resources/profiles/InfiMech/filament/Generic PA-CF @InfiMech.json +++ b/resources/profiles/InfiMech/filament/Generic PA-CF @InfiMech.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @InfiMech", - "inherits": "fdm_filament_pa", "renamed_from": "InfiMech Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "IRYJpvGGjpF4ofY1", "filament_id": "OFQLcbps", diff --git a/resources/profiles/InfiMech/filament/Generic PC @InfiMech.json b/resources/profiles/InfiMech/filament/Generic PC @InfiMech.json index a37d5db2b7..ca98f3db10 100644 --- a/resources/profiles/InfiMech/filament/Generic PC @InfiMech.json +++ b/resources/profiles/InfiMech/filament/Generic PC @InfiMech.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @InfiMech", - "inherits": "fdm_filament_pc", "renamed_from": "InfiMech Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "W0oujcCps06G6yNB", "filament_id": "OFLakOUI", diff --git a/resources/profiles/InfiMech/filament/Generic PETG @InfiMech.json b/resources/profiles/InfiMech/filament/Generic PETG @InfiMech.json index 55162d9852..f57df9a1fc 100644 --- a/resources/profiles/InfiMech/filament/Generic PETG @InfiMech.json +++ b/resources/profiles/InfiMech/filament/Generic PETG @InfiMech.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @InfiMech", - "inherits": "fdm_filament_pet", "renamed_from": "InfiMech Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "sAi8oKez7NGKo1wy", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/InfiMech/filament/Generic PLA @InfiMech.json b/resources/profiles/InfiMech/filament/Generic PLA @InfiMech.json index 4d2d7dc402..fecad691df 100644 --- a/resources/profiles/InfiMech/filament/Generic PLA @InfiMech.json +++ b/resources/profiles/InfiMech/filament/Generic PLA @InfiMech.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @InfiMech", - "inherits": "fdm_filament_pla", "renamed_from": "InfiMech Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "tdnlzJyNB6zpQS8w", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/InfiMech/filament/Generic TPU @InfiMech.json b/resources/profiles/InfiMech/filament/Generic TPU @InfiMech.json index bc2b0c37a8..58e7605d3e 100644 --- a/resources/profiles/InfiMech/filament/Generic TPU @InfiMech.json +++ b/resources/profiles/InfiMech/filament/Generic TPU @InfiMech.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @InfiMech", - "inherits": "fdm_filament_tpu", "renamed_from": "InfiMech Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "kK1S7YP8vgTJeFPO", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json b/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json index a77186c2fd..9fb5343da9 100644 --- a/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json +++ b/resources/profiles/InfiMech/machine/EX+APS/InfiMech EX+APS 0.4 nozzle.json @@ -198,6 +198,6 @@ "0.4" ], "z_hop_types": [ - "Normal Lift" + "Auto Lift" ] } diff --git a/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json b/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json index a018e3f8a3..ec9bbc6d00 100644 --- a/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json +++ b/resources/profiles/InfiMech/machine/EX/InfiMech EX 0.4 nozzle.json @@ -198,6 +198,6 @@ "0.4" ], "z_hop_types": [ - "Normal Lift" + "Auto Lift" ] } diff --git a/resources/profiles/LH.json b/resources/profiles/LH.json index 7784b42bed..43d0afc572 100644 --- a/resources/profiles/LH.json +++ b/resources/profiles/LH.json @@ -1,7 +1,7 @@ { "name": "LH", "url": "https://github.com/lhndo/LH-Stinger", - "version": "02.04.00.05", + "version": "02.04.00.07", "force_update": "0", "description": "LH 3D Printer Configuration", "machine_model_list": [ diff --git a/resources/profiles/LH/LH_Stinger_MMU_buildplate_texture.png b/resources/profiles/LH/LH_Stinger_MMU_buildplate_texture.png deleted file mode 100644 index d21afe069e..0000000000 Binary files a/resources/profiles/LH/LH_Stinger_MMU_buildplate_texture.png and /dev/null differ diff --git a/resources/profiles/LH/LH_Stinger_MMU_buildplate_texture.svg b/resources/profiles/LH/LH_Stinger_MMU_buildplate_texture.svg new file mode 100644 index 0000000000..b8e11ed2a8 --- /dev/null +++ b/resources/profiles/LH/LH_Stinger_MMU_buildplate_texture.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/resources/profiles/LH/LH_Stinger_buildplate_model.stl b/resources/profiles/LH/LH_Stinger_buildplate_model.stl index 37fd514014..a71ba5cbd4 100644 Binary files a/resources/profiles/LH/LH_Stinger_buildplate_model.stl and b/resources/profiles/LH/LH_Stinger_buildplate_model.stl differ diff --git a/resources/profiles/LH/LH_Stinger_buildplate_texture.png b/resources/profiles/LH/LH_Stinger_buildplate_texture.png deleted file mode 100644 index e03843bd23..0000000000 Binary files a/resources/profiles/LH/LH_Stinger_buildplate_texture.png and /dev/null differ diff --git a/resources/profiles/LH/LH_Stinger_buildplate_texture.svg b/resources/profiles/LH/LH_Stinger_buildplate_texture.svg new file mode 100644 index 0000000000..f5606ba2f1 --- /dev/null +++ b/resources/profiles/LH/LH_Stinger_buildplate_texture.svg @@ -0,0 +1 @@ + \ No newline at end of file diff --git a/resources/profiles/LH/filament/LHS ABS.json b/resources/profiles/LH/filament/LHS ABS.json index 2e7ee48e32..f31f1c0392 100644 --- a/resources/profiles/LH/filament/LHS ABS.json +++ b/resources/profiles/LH/filament/LHS ABS.json @@ -1,11 +1,11 @@ { - "name": "LHS ABS", "type": "filament", - "filament_id": "OFztQ7rO", - "setting_id": "EQxNYC7BdGEA2iiD", - "from": "system", - "instantiation": "true", + "name": "LHS ABS", "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "EQxNYC7BdGEA2iiD", + "filament_id": "OFztQ7rO", + "instantiation": "true", "compatible_printers": [ "LH Stinger 0.4 nozzle", "LH Stinger MMU 0.4 nozzle" @@ -352,4 +352,4 @@ "volumetric_speed_coefficients": [ "" ] -} \ No newline at end of file +} diff --git a/resources/profiles/LH/filament/LHS ASA.json b/resources/profiles/LH/filament/LHS ASA.json index 4cc096cb90..8495669ef7 100644 --- a/resources/profiles/LH/filament/LHS ASA.json +++ b/resources/profiles/LH/filament/LHS ASA.json @@ -1,11 +1,11 @@ { - "name": "LHS ASA", - "filament_id": "OFaP2SsH", - "setting_id": "hoq5bKHUb9DE1ezj", "type": "filament", - "from": "system", - "instantiation": "true", + "name": "LHS ASA", "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "hoq5bKHUb9DE1ezj", + "filament_id": "OFaP2SsH", + "instantiation": "true", "compatible_printers": [ "LH Stinger 0.4 nozzle", "LH Stinger MMU 0.4 nozzle" @@ -349,4 +349,4 @@ "volumetric_speed_coefficients": [ "" ] -} \ No newline at end of file +} diff --git a/resources/profiles/LH/filament/LHS PCTG.json b/resources/profiles/LH/filament/LHS PCTG.json index 2f2a7d2fd6..515158064f 100644 --- a/resources/profiles/LH/filament/LHS PCTG.json +++ b/resources/profiles/LH/filament/LHS PCTG.json @@ -1,11 +1,11 @@ { - "name": "LHS PCTG", "type": "filament", - "filament_id": "OFBJAdLw", - "setting_id": "dKWttiAQNwymKsIC", - "from": "system", - "instantiation": "true", + "name": "LHS PCTG", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "dKWttiAQNwymKsIC", + "filament_id": "OFBJAdLw", + "instantiation": "true", "compatible_printers": [ "LH Stinger 0.4 nozzle", "LH Stinger MMU 0.4 nozzle" @@ -349,4 +349,4 @@ "volumetric_speed_coefficients": [ "" ] -} \ No newline at end of file +} diff --git a/resources/profiles/LH/filament/LHS PETG.json b/resources/profiles/LH/filament/LHS PETG.json index 2956267dab..88893460dd 100644 --- a/resources/profiles/LH/filament/LHS PETG.json +++ b/resources/profiles/LH/filament/LHS PETG.json @@ -1,11 +1,11 @@ { - "name": "LHS PETG", "type": "filament", - "filament_id": "OFRJ325z", - "setting_id": "aZdY1M44ui7Rtj8r", - "from": "system", - "instantiation": "true", + "name": "LHS PETG", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "aZdY1M44ui7Rtj8r", + "filament_id": "OFRJ325z", + "instantiation": "true", "compatible_printers": [ "LH Stinger 0.4 nozzle", "LH Stinger MMU 0.4 nozzle" @@ -349,4 +349,4 @@ "volumetric_speed_coefficients": [ "" ] -} \ No newline at end of file +} diff --git a/resources/profiles/LH/filament/LHS PLA.json b/resources/profiles/LH/filament/LHS PLA.json index 87ef788b7d..d52996d0a9 100644 --- a/resources/profiles/LH/filament/LHS PLA.json +++ b/resources/profiles/LH/filament/LHS PLA.json @@ -1,11 +1,11 @@ { - "name": "LHS PLA", "type": "filament", - "filament_id": "OFyoBZdm", - "setting_id": "M8WSwqD1iQkQntpy", - "from": "system", - "instantiation": "true", + "name": "LHS PLA", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "M8WSwqD1iQkQntpy", + "filament_id": "OFyoBZdm", + "instantiation": "true", "compatible_printers": [ "LH Stinger 0.4 nozzle", "LH Stinger MMU 0.4 nozzle" @@ -349,4 +349,4 @@ "volumetric_speed_coefficients": [ "" ] -} \ No newline at end of file +} diff --git a/resources/profiles/LH/filament/LHS TPU Foamy 78A.json b/resources/profiles/LH/filament/LHS TPU Foamy 78A.json index 3be659400a..db9a24428a 100644 --- a/resources/profiles/LH/filament/LHS TPU Foamy 78A.json +++ b/resources/profiles/LH/filament/LHS TPU Foamy 78A.json @@ -1,11 +1,11 @@ { - "name": "LHS TPU Foamy 78A", "type": "filament", - "filament_id": "OFngcE81", - "setting_id": "FWyg21qHmAKeihMn", - "from": "system", - "instantiation": "true", + "name": "LHS TPU Foamy 78A", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "FWyg21qHmAKeihMn", + "filament_id": "OFngcE81", + "instantiation": "true", "compatible_printers": [ "LH Stinger 0.4 nozzle", "LH Stinger MMU 0.4 nozzle" @@ -349,4 +349,4 @@ "volumetric_speed_coefficients": [ "" ] -} \ No newline at end of file +} diff --git a/resources/profiles/LH/filament/LHS TPU.json b/resources/profiles/LH/filament/LHS TPU.json index f503425bd4..6c6fd5cf99 100644 --- a/resources/profiles/LH/filament/LHS TPU.json +++ b/resources/profiles/LH/filament/LHS TPU.json @@ -1,11 +1,11 @@ { - "name": "LHS TPU", "type": "filament", - "filament_id": "OFIZMQwM", - "setting_id": "ILgpZYIqYGH6mqdI", - "from": "system", - "instantiation": "true", + "name": "LHS TPU", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "ILgpZYIqYGH6mqdI", + "filament_id": "OFIZMQwM", + "instantiation": "true", "compatible_printers": [ "LH Stinger 0.4 nozzle", "LH Stinger MMU 0.4 nozzle" @@ -349,4 +349,4 @@ "volumetric_speed_coefficients": [ "" ] -} \ No newline at end of file +} diff --git a/resources/profiles/LH/machine/LH Stinger MMU.json b/resources/profiles/LH/machine/LH Stinger MMU.json index dd0a1201c6..9e1f1df44b 100644 --- a/resources/profiles/LH/machine/LH Stinger MMU.json +++ b/resources/profiles/LH/machine/LH Stinger MMU.json @@ -5,8 +5,8 @@ "nozzle_diameter": "0.4", "machine_tech": "FFF", "family": "LH", - "bed_model": "LH_Stinger_buildplate_model.STL", - "bed_texture": "LH_Stinger_MMU_buildplate_texture.png", + "bed_model": "LH_Stinger_buildplate_model.stl", + "bed_texture": "LH_Stinger_MMU_buildplate_texture.svg", "hotend_model": "", "default_materials": "LHS PLA;LHS PETG;LHS PCTG;LHS ASA;LHS ABS;LHS PC CF;LHS TPU Foamy 78A;LHS TPU;" } \ No newline at end of file diff --git a/resources/profiles/LH/machine/LH Stinger.json b/resources/profiles/LH/machine/LH Stinger.json index 1e29493210..f02a42da4c 100644 --- a/resources/profiles/LH/machine/LH Stinger.json +++ b/resources/profiles/LH/machine/LH Stinger.json @@ -5,8 +5,8 @@ "nozzle_diameter": "0.4", "machine_tech": "FFF", "family": "LH", - "bed_model": "LH_Stinger_buildplate_model.STL", - "bed_texture": "LH_Stinger_buildplate_texture.png", + "bed_model": "LH_Stinger_buildplate_model.stl", + "bed_texture": "LH_Stinger_buildplate_texture.svg", "hotend_model": "", "default_materials": "LHS PLA;LHS PETG;LHS PCTG;LHS ASA;LHS ABS;LHS PC CF;LHS TPU Foamy 78A;LHS TPU;" } \ No newline at end of file diff --git a/resources/profiles/LONGER.json b/resources/profiles/LONGER.json index b4d6c3a1fb..7ce53329e1 100644 --- a/resources/profiles/LONGER.json +++ b/resources/profiles/LONGER.json @@ -1,6 +1,6 @@ { "name": "LONGER", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "LONGER configurations", "machine_model_list": [ diff --git a/resources/profiles/LONGER/machine/LONGER LK10 (0.2 nozzle).json b/resources/profiles/LONGER/machine/LONGER LK10 (0.2 nozzle).json index 93a11e4a66..71b70e7fc8 100644 --- a/resources/profiles/LONGER/machine/LONGER LK10 (0.2 nozzle).json +++ b/resources/profiles/LONGER/machine/LONGER LK10 (0.2 nozzle).json @@ -33,36 +33,47 @@ ], "thumbnails_format": "PNG", "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "10000", "10000" ], "machine_max_acceleration_travel": [ + "10000", "10000" ], "machine_max_acceleration_x": [ + "10000", "10000" ], "machine_max_acceleration_y": [ + "10000", "10000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "12", "12" ] } diff --git a/resources/profiles/LONGER/machine/LONGER LK10 (0.4 nozzle).json b/resources/profiles/LONGER/machine/LONGER LK10 (0.4 nozzle).json index ce8f8b9580..5073e5e3c2 100644 --- a/resources/profiles/LONGER/machine/LONGER LK10 (0.4 nozzle).json +++ b/resources/profiles/LONGER/machine/LONGER LK10 (0.4 nozzle).json @@ -33,36 +33,47 @@ ], "thumbnails_format": "PNG", "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "10000", "10000" ], "machine_max_acceleration_travel": [ + "10000", "10000" ], "machine_max_acceleration_x": [ + "10000", "10000" ], "machine_max_acceleration_y": [ + "10000", "10000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "12", "12" ] } diff --git a/resources/profiles/LONGER/machine/LONGER LK10 (0.6 nozzle).json b/resources/profiles/LONGER/machine/LONGER LK10 (0.6 nozzle).json index a99639d18d..9dee6b44a9 100644 --- a/resources/profiles/LONGER/machine/LONGER LK10 (0.6 nozzle).json +++ b/resources/profiles/LONGER/machine/LONGER LK10 (0.6 nozzle).json @@ -33,36 +33,47 @@ ], "thumbnails_format": "PNG", "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "10000", "10000" ], "machine_max_acceleration_travel": [ + "10000", "10000" ], "machine_max_acceleration_x": [ + "10000", "10000" ], "machine_max_acceleration_y": [ + "10000", "10000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "12", "12" ] } diff --git a/resources/profiles/LONGER/machine/LONGER LK10 (0.8 nozzle).json b/resources/profiles/LONGER/machine/LONGER LK10 (0.8 nozzle).json index 0493d30520..222e47453e 100644 --- a/resources/profiles/LONGER/machine/LONGER LK10 (0.8 nozzle).json +++ b/resources/profiles/LONGER/machine/LONGER LK10 (0.8 nozzle).json @@ -33,36 +33,47 @@ ], "thumbnails_format": "PNG", "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "10000", "10000" ], "machine_max_acceleration_travel": [ + "10000", "10000" ], "machine_max_acceleration_x": [ + "10000", "10000" ], "machine_max_acceleration_y": [ + "10000", "10000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "12", "12" ] } diff --git a/resources/profiles/Lulzbot.json b/resources/profiles/Lulzbot.json index 1ca47d7cba..5f0eb2a917 100644 --- a/resources/profiles/Lulzbot.json +++ b/resources/profiles/Lulzbot.json @@ -1,10 +1,14 @@ { "name": "Lulzbot", "url": "https://ohai.lulzbot.com/group/taz-6/", - "version": "02.04.00.04", + "version": "02.04.00.06", "force_update": "0", "description": "Lulzbot configurations", "machine_model_list": [ + { + "name": "Lulzbot Mini 1", + "sub_path": "machine/Lulzbot Mini 1.json" + }, { "name": "Lulzbot Taz 4 or 5", "sub_path": "machine/Lulzbot Taz 4 or 5.json" @@ -27,6 +31,10 @@ "name": "fdm_process_common", "sub_path": "process/fdm_process_common.json" }, + { + "name": "0.25mm Standard @Lulzbot Mini 1", + "sub_path": "process/0.25mm Standard @Lulzbot Mini 1.json" + }, { "name": "0.25mm Standard @Lulzbot Taz 4 or 5", "sub_path": "process/0.25mm Standard @Lulzbot Taz 4 or 5.json" @@ -43,6 +51,10 @@ "name": "0.25mm Standard @Lulzbot Taz Pro S", "sub_path": "process/0.25mm Standard @Lulzbot Taz Pro S.json" }, + { + "name": "0.18mm High Detail @Lulzbot Mini 1", + "sub_path": "process/0.18mm High Detail @Lulzbot Mini 1.json" + }, { "name": "0.18mm High Detail @Lulzbot Taz 4 or 5", "sub_path": "process/0.18mm High Detail @Lulzbot Taz 4 or 5.json" @@ -65,13 +77,25 @@ "name": "Generic ABS @Lulzbot", "sub_path": "filament/Generic ABS @Lulzbot.json" }, + { + "name": "Generic ABS @Lulzbot Mini 1", + "sub_path": "filament/Generic ABS @Lulzbot Mini 1.json" + }, { "name": "Generic PETG @Lulzbot", "sub_path": "filament/Generic PETG @Lulzbot.json" }, + { + "name": "Generic PETG @Lulzbot Mini 1", + "sub_path": "filament/Generic PETG @Lulzbot Mini 1.json" + }, { "name": "Generic PLA @Lulzbot", "sub_path": "filament/Generic PLA @Lulzbot.json" + }, + { + "name": "Generic PLA @Lulzbot Mini 1", + "sub_path": "filament/Generic PLA @Lulzbot Mini 1.json" } ], "machine_list": [ @@ -79,6 +103,10 @@ "name": "fdm_machine_common", "sub_path": "machine/fdm_machine_common.json" }, + { + "name": "Lulzbot Mini 1 0.5 nozzle", + "sub_path": "machine/Lulzbot Mini 1 0.5 nozzle.json" + }, { "name": "Lulzbot Taz 4 or 5 0.5 nozzle", "sub_path": "machine/Lulzbot Taz 4 or 5 0.5 nozzle.json" diff --git a/resources/profiles/Lulzbot/Lulzbot Mini 1_cover.png b/resources/profiles/Lulzbot/Lulzbot Mini 1_cover.png new file mode 100644 index 0000000000..1d46d02650 Binary files /dev/null and b/resources/profiles/Lulzbot/Lulzbot Mini 1_cover.png differ diff --git a/resources/profiles/Lulzbot/filament/Generic ABS @Lulzbot Mini 1.json b/resources/profiles/Lulzbot/filament/Generic ABS @Lulzbot Mini 1.json new file mode 100644 index 0000000000..63f59fcbb9 --- /dev/null +++ b/resources/profiles/Lulzbot/filament/Generic ABS @Lulzbot Mini 1.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Generic ABS @Lulzbot Mini 1", + "inherits": "Generic ABS @System", + "from": "system", + "setting_id": "vYckNG6HUwmwixlF", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_density": [ + "1.06" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "cool_plate_temp": [ + "110" + ], + "cool_plate_temp_initial_layer": [ + "110" + ], + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "fan_min_speed": [ + "40" + ], + "fan_max_speed": [ + "60" + ], + "compatible_printers": [ + "Lulzbot Mini 1 0.5 nozzle" + ], + "textured_cool_plate_temp": [ + "110" + ], + "textured_cool_plate_temp_initial_layer": [ + "110" + ], + "supertack_plate_temp": [ + "110" + ], + "supertack_plate_temp_initial_layer": [ + "110" + ] +} diff --git a/resources/profiles/Lulzbot/filament/Generic ABS @Lulzbot.json b/resources/profiles/Lulzbot/filament/Generic ABS @Lulzbot.json index 95d8a2274c..e7590dc5f8 100644 --- a/resources/profiles/Lulzbot/filament/Generic ABS @Lulzbot.json +++ b/resources/profiles/Lulzbot/filament/Generic ABS @Lulzbot.json @@ -1,14 +1,17 @@ { "type": "filament", "name": "Generic ABS @Lulzbot", - "inherits": "Generic ABS @System", "renamed_from": "Lulzbot 2.85mm ABS", + "inherits": "Generic ABS @System", "from": "system", "setting_id": "Mtn4Fh3Lp6KlAxjo", "instantiation": "true", "filament_diameter": [ "2.85" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "6" ], diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1M.json b/resources/profiles/Lulzbot/filament/Generic PETG @Lulzbot Mini 1.json similarity index 50% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1M.json rename to resources/profiles/Lulzbot/filament/Generic PETG @Lulzbot Mini 1.json index ca09a47935..5b7bf6a70e 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1M.json +++ b/resources/profiles/Lulzbot/filament/Generic PETG @Lulzbot Mini 1.json @@ -1,73 +1,71 @@ { "type": "filament", - "name": "PolyTerra PLA @BBL A1M", - "inherits": "PolyTerra PLA @base", + "name": "Generic PETG @Lulzbot Mini 1", + "inherits": "Generic PETG @System", "from": "system", - "setting_id": "GFSL01_00", + "setting_id": "zcgAqKXFHMgCJr2q", "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 mini 0.4 nozzle", - "Bambu Lab A1 mini 0.6 nozzle", - "Bambu Lab A1 mini 0.8 nozzle" - ], - "cool_plate_temp": [ - "60" - ], - "eng_plate_temp": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "cool_plate_temp_initial_layer": [ - "60" - ], - "eng_plate_temp_initial_layer": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "overhang_fan_speed": [ - "75" - ], - "fan_cooling_layer_time": [ - "80" - ], - "filament_cost": [ - "21.99" + "filament_diameter": [ + "2.85" ], "filament_density": [ - "1.37" + "1.24" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" ], "filament_max_volumetric_speed": [ - "22" + "6" ], - "bed_type": [ - "Cool Plate" + "nozzle_temperature": [ + "230" ], - "fan_max_speed": [ + "nozzle_temperature_initial_layer": [ + "235" + ], + "cool_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "eng_plate_temp": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "hot_plate_temp": [ + "80" + ], + "hot_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ "80" ], "fan_min_speed": [ + "40" + ], + "fan_max_speed": [ "60" ], - "slow_down_min_speed": [ - "5" + "compatible_printers": [ + "Lulzbot Mini 1 0.5 nozzle" ], - "slow_down_layer_time": [ - "8" + "textured_cool_plate_temp": [ + "80" ], - "temperature_vitrification": [ - "61" + "textured_cool_plate_temp_initial_layer": [ + "80" ], - "nozzle_temperature_range_high": [ - "230" + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" ] } diff --git a/resources/profiles/Lulzbot/filament/Generic PETG @Lulzbot.json b/resources/profiles/Lulzbot/filament/Generic PETG @Lulzbot.json index 825df8bdc8..3a45b4f117 100644 --- a/resources/profiles/Lulzbot/filament/Generic PETG @Lulzbot.json +++ b/resources/profiles/Lulzbot/filament/Generic PETG @Lulzbot.json @@ -1,14 +1,17 @@ { "type": "filament", "name": "Generic PETG @Lulzbot", - "inherits": "Generic PETG @System", "renamed_from": "Lulzbot 2.85mm PETG", + "inherits": "Generic PETG @System", "from": "system", "setting_id": "dqj6O9NIPAaq8wWz", "instantiation": "true", "filament_diameter": [ "2.85" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "6" ], diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1.json b/resources/profiles/Lulzbot/filament/Generic PLA @Lulzbot Mini 1.json similarity index 53% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1.json rename to resources/profiles/Lulzbot/filament/Generic PLA @Lulzbot Mini 1.json index d10f958597..3a0a3f5549 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA @BBL A1.json +++ b/resources/profiles/Lulzbot/filament/Generic PLA @Lulzbot Mini 1.json @@ -1,73 +1,68 @@ { "type": "filament", - "name": "PolyTerra PLA @BBL A1", - "inherits": "PolyTerra PLA @base", + "name": "Generic PLA @Lulzbot Mini 1", + "inherits": "Generic PLA @System", "from": "system", - "setting_id": "GFSL01_02", + "setting_id": "xjWvBH3Qyc46iwAi", "instantiation": "true", - "compatible_printers": [ - "Bambu Lab A1 0.4 nozzle", - "Bambu Lab A1 0.6 nozzle", - "Bambu Lab A1 0.8 nozzle" + "filament_diameter": [ + "2.85" + ], + "filament_density": [ + "1.25" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "210" ], "cool_plate_temp": [ "60" ], - "eng_plate_temp": [ - "60" - ], - "hot_plate_temp": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], "cool_plate_temp_initial_layer": [ "60" ], + "eng_plate_temp": [ + "60" + ], "eng_plate_temp_initial_layer": [ "60" ], + "hot_plate_temp": [ + "60" + ], "hot_plate_temp_initial_layer": [ "60" ], + "textured_plate_temp": [ + "60" + ], "textured_plate_temp_initial_layer": [ "60" ], - "overhang_fan_speed": [ + "fan_min_speed": [ "75" ], - "fan_cooling_layer_time": [ - "80" + "compatible_printers": [ + "Lulzbot Mini 1 0.5 nozzle" ], - "filament_cost": [ - "21.99" - ], - "filament_density": [ - "1.37" - ], - "filament_max_volumetric_speed": [ - "22" - ], - "bed_type": [ - "Cool Plate" - ], - "fan_max_speed": [ - "80" - ], - "fan_min_speed": [ + "textured_cool_plate_temp": [ "60" ], - "slow_down_min_speed": [ - "5" + "textured_cool_plate_temp_initial_layer": [ + "60" ], - "slow_down_layer_time": [ - "8" + "supertack_plate_temp": [ + "60" ], - "temperature_vitrification": [ - "61" - ], - "nozzle_temperature_range_high": [ - "230" + "supertack_plate_temp_initial_layer": [ + "60" ] } diff --git a/resources/profiles/Lulzbot/filament/Generic PLA @Lulzbot.json b/resources/profiles/Lulzbot/filament/Generic PLA @Lulzbot.json index d08d72ee53..29dae86c0e 100644 --- a/resources/profiles/Lulzbot/filament/Generic PLA @Lulzbot.json +++ b/resources/profiles/Lulzbot/filament/Generic PLA @Lulzbot.json @@ -1,14 +1,17 @@ { "type": "filament", "name": "Generic PLA @Lulzbot", - "inherits": "Generic PLA @System", "renamed_from": "Lulzbot 2.85mm PLA", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "3evRjso1wNxd9nV3", "instantiation": "true", "filament_diameter": [ "2.85" ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "8" ], diff --git a/resources/profiles/Lulzbot/machine/Lulzbot Mini 1 0.5 nozzle.json b/resources/profiles/Lulzbot/machine/Lulzbot Mini 1 0.5 nozzle.json new file mode 100644 index 0000000000..4059188689 --- /dev/null +++ b/resources/profiles/Lulzbot/machine/Lulzbot Mini 1 0.5 nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "machine", + "name": "Lulzbot Mini 1 0.5 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "Jhc8WqYmrK3y65fQ", + "instantiation": "true", + "printer_model": "Lulzbot Mini 1", + "default_print_profile": "0.25mm Standard @Lulzbot Mini 1", + "nozzle_diameter": [ + "0.5" + ], + "printable_area": [ + "0x0", + "154x0", + "154x154", + "0x154" + ], + "printable_height": "158", + "nozzle_type": "undefine", + "auxiliary_fan": "0", + "emit_machine_limits_to_gcode": "0", + "machine_max_acceleration_extruding": [ + "2000", + "2000" + ], + "machine_max_acceleration_retracting": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "2000", + "2000" + ], + "machine_max_acceleration_x": [ + "2000", + "2000" + ], + "machine_max_acceleration_y": [ + "2000", + "2000" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_speed_e": [ + "40", + "40" + ], + "machine_max_speed_x": [ + "500", + "500" + ], + "machine_max_speed_y": [ + "500", + "500" + ], + "machine_max_speed_z": [ + "3", + "3" + ], + "machine_max_jerk_e": [ + "5", + "5" + ], + "machine_max_jerk_x": [ + "8", + "8" + ], + "machine_max_jerk_y": [ + "8", + "8" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "max_layer_height": [ + "0.4" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "Lulzbot", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "70%" + ], + "retraction_length": [ + "1.5" + ], + "retraction_speed": [ + "10" + ], + "deretraction_speed": [ + "10" + ], + "single_extruder_multi_material": "1", + "default_filament_profile": [ + "Generic PLA @Lulzbot Mini 1" + ], + "machine_start_gcode": ";This G-Code has been translated from LulzBot's CuraLE (resources/gcodes/mini_1) startup GCODE for the Mini 1 Single Extruder\nM73 P0; clear GLCD progress bar (ignored if no LCD is fitted)\nM75; start GLCD timer\nM107; disable fans\nM420 S0; disable leveling matrix\nG90; absolute positioning\nM82; set extruder to absolute mode\nG92 E0; set extruder position to 0\nM140 S{bed_temperature_initial_layer[0]}; start bed heating up (w)\nG28; home all axes (Z homes to the top on the Mini)\nG0 X0 Y187 Z156 F200; move away from endstops\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R170\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R190; unknown filament type soften temp before homing Z{endif}\nG1 E-30 F75; retract filament clear of the melt zone so it cannot ooze onto the probe washers\nM109 {if filament_type[0] == \"PLA\"}R180\n{elsif filament_type[0] == \"ABS\"}R190\n{elsif filament_type[0] == \"ABS-GF\"}R190\n{elsif filament_type[0] == \"ASA\"}R190\n{elsif filament_type[0] == \"ASA-Aero\"}R190\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R220\n{elsif filament_type[0] == \"PA-CF\"}R220\n{elsif filament_type[0] == \"PA-GF\"}R220\n{elsif filament_type[0] == \"PA6-CF\"}R220\n{elsif filament_type[0] == \"PA11-CF\"}R220\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R220\n{elsif filament_type[0] == \"PC-CF\"}R220\n{elsif filament_type[0] == \"PCTG\"}R190\n{elsif filament_type[0] == \"PE\"}R190\n{elsif filament_type[0] == \"PE-CF\"}R190\n{elsif filament_type[0] == \"PET-CF\"}R190\n{elsif filament_type[0] == \"PETG\"}R190\n{elsif filament_type[0] == \"PETG-CF10\"}R190\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R180\n{elsif filament_type[0] == \"PVB\"}R180\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R180\n{elsif filament_type[0] == \"FLEX\"}R180\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R180\n{elsif filament_type[0] == \"NYLON\"}R220\n{else}R170; unknown filament type wipe temp{endif}\nG1 X45 Y173 F11520; move above wiper pad\nG1 Z0 F1200; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000; wiping\nG1 X52 Y171 Z-.5 F4000; wiping\nG1 X42 Y173 Z0 F4000; wiping\nG1 X52 Y171 F4000; wiping\nG1 X42 Y173 F4000; wiping\nG1 X52 Y171 F4000; wiping\nG1 X42 Y173 F4000; wiping\nG1 X52 Y171 F4000; wiping\nG1 X57 Y173 F4000; wiping\nG1 X77 Y171 F4000; wiping\nG1 X57 Y173 F4000; wiping\nG1 X77 Y171 F4000; wiping\nG1 X57 Y173 F4000; wiping\nG1 X87 Y171 F4000; wiping\nG1 X77 Y173 F4000; wiping\nG1 X97 Y171 F4000; wiping\nG1 X77 Y173 F4000; wiping\nG1 X97 Y171 F4000; wiping\nG1 X77 Y173 F4000; wiping\nG1 X97 Y171 F4000; wiping\nG1 X107 Y173 F4000; wiping\nG1 X97 Y171 F4000; wiping\nG1 X107 Y173 F4000; wiping\nG1 X97 Y171 F4000; wiping\nG1 X107 Y173 F4000; wiping\nG1 X112 Y171 Z-0.5 F1000; wiping\nG1 Z10; raise extruder\nG28 X0 Y0; home X and Y\nG0 X0 Y187 F200; move away from endstops\nM109 {if filament_type[0] == \"PLA\"}R160\n{elsif filament_type[0] == \"ABS\"}R170\n{elsif filament_type[0] == \"ABS-GF\"}R170\n{elsif filament_type[0] == \"ASA\"}R170\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"BVOH\"}R170\n{elsif filament_type[0] == \"EVA\"}R170\n{elsif filament_type[0] == \"PA\"}R200\n{elsif filament_type[0] == \"PA-CF\"}R200\n{elsif filament_type[0] == \"PA-GF\"}R170\n{elsif filament_type[0] == \"PA6-CF\"}R170\n{elsif filament_type[0] == \"PA11-CF\"}R200\n{elsif filament_type[0] == \"ASA-Aero\"}R170\n{elsif filament_type[0] == \"PC\"}R200\n{elsif filament_type[0] == \"PC-CF\"}R200\n{elsif filament_type[0] == \"PCTG\"}R180\n{elsif filament_type[0] == \"PE\"}R180\n{elsif filament_type[0] == \"PE-CF\"}R180\n{elsif filament_type[0] == \"PET-CF\"}R170\n{elsif filament_type[0] == \"PETG\"}R170\n{elsif filament_type[0] == \"PETG-CF10\"}R170\n{elsif filament_type[0] == \"PHA\"}R180\n{elsif filament_type[0] == \"PLA-AERO\"}R180\n{elsif filament_type[0] == \"PLA-CF\"}R180\n{elsif filament_type[0] == \"PP\"}R180\n{elsif filament_type[0] == \"PP-CF\"}R180\n{elsif filament_type[0] == \"PP-GF\"}R180\n{elsif filament_type[0] == \"PPS\"}R180\n{elsif filament_type[0] == \"PPS-CF\"}R180\n{elsif filament_type[0] == \"PVA\"}R160\n{elsif filament_type[0] == \"PVB\"}R160\n{elsif filament_type[0] == \"SBS\"}R180\n{elsif filament_type[0] == \"TPU\"}R160\n{elsif filament_type[0] == \"FLEX\"}R160\n{elsif filament_type[0] == \"PET\"}R170\n{elsif filament_type[0] == \"HIPS\"}R160\n{elsif filament_type[0] == \"NYLON\"}R200\n{else}R170; unknown filament type probe temp{endif}\nM204 S300; set probing acceleration\nG29; start auto-leveling sequence\nM420 S1; enable leveling matrix\nM204 S2000; restore standard acceleration\nG28 X0 Y0; re-home to account for build variance of earlier Mini builds\nG0 X0 Y187 F200; move away from endstops\nG0 Y152 F4000; move in front of wiper pad\nG4 S1; pause\nM400; wait for moves to finish\nM117 Heating...; progress indicator message on LCD\nM109 R{nozzle_temperature_initial_layer[0]}; wait for extruder to reach printing temp (w)\nM190 R{bed_temperature_initial_layer[0]}; wait for bed to reach printing temp\nG1 Z2 E0 F75; prime tiny bit of filament into the nozzle\nM117 Mini Printing...; progress indicator message on LCD\n;Start G-Code End", + "machine_end_gcode": ";End G-Code Begin\nM400; wait for moves to finish\nM104 S0; disable hotend\nM140 S0; start bed cooling\nM107; disable fans\nG92 E5; set extruder to 5mm for retract on print end\nG1 X5 Y5 Z158 E0 F10000; move to cooling position, retracting on the way\nG1 E5; re-prime extruder\nM77; stop GLCD timer\nG1 X145 F1000; move extruder out of the way\nG1 Y175 F1000; present finished print\nM84; disable steppers\nG90; absolute positioning\nM117 Print Complete.; print complete message\n;End G-Code End", + "before_layer_change_gcode": "G92 E0; reset relative extrusion", + "layer_change_gcode": "; LAYER:{layer_num}\nM117 Layer: {layer_num +1} / [total_layer_count]", + "scan_first_layer": "0" +} diff --git a/resources/profiles/Lulzbot/machine/Lulzbot Mini 1.json b/resources/profiles/Lulzbot/machine/Lulzbot Mini 1.json new file mode 100644 index 0000000000..315497585a --- /dev/null +++ b/resources/profiles/Lulzbot/machine/Lulzbot Mini 1.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Lulzbot Mini 1", + "model_id": "Lulzbot-Mini-1", + "nozzle_diameter": "0.5", + "machine_tech": "FFF", + "family": "Lulzbot", + "bed_model": "", + "bed_texture": "lulzbot_logo.svg", + "hotend_model": "", + "default_materials": "Generic PLA @Lulzbot Mini 1;Generic ABS @Lulzbot Mini 1;Generic PETG @Lulzbot Mini 1" +} diff --git a/resources/profiles/Lulzbot/process/0.18mm High Detail @Lulzbot Mini 1.json b/resources/profiles/Lulzbot/process/0.18mm High Detail @Lulzbot Mini 1.json new file mode 100644 index 0000000000..974b51f747 --- /dev/null +++ b/resources/profiles/Lulzbot/process/0.18mm High Detail @Lulzbot Mini 1.json @@ -0,0 +1,12 @@ +{ + "type": "process", + "name": "0.18mm High Detail @Lulzbot Mini 1", + "inherits": "0.25mm Standard @Lulzbot Mini 1", + "from": "system", + "setting_id": "2FKMCpTJ1Ptv1wLD", + "instantiation": "true", + "layer_height": "0.18", + "compatible_printers": [ + "Lulzbot Mini 1 0.5 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Mini 1.json similarity index 69% rename from resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json rename to resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Mini 1.json index bd77f960ac..50aa0dbfac 100644 --- a/resources/profiles/UltiMaker/process/0.25mm Darft @UltiMaker 2.json +++ b/resources/profiles/Lulzbot/process/0.25mm Standard @Lulzbot Mini 1.json @@ -1,42 +1,43 @@ { "type": "process", - "name": "0.25mm Draft @UltiMaker 2", + "name": "0.25mm Standard @Lulzbot Mini 1", "inherits": "fdm_process_common", "from": "system", - "setting_id": "dBum79P8qUSRgT90", + "setting_id": "bqY8CEHwvUYnLRPe", "instantiation": "true", "reduce_crossing_wall": "0", "layer_height": "0.25", "max_travel_detour_distance": "0", "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "3", + "bottom_shell_layers": "5", "bottom_shell_thickness": "0", - "bridge_flow": "1", - "bridge_speed": "60", + "bridge_flow": "0.85", + "bridge_speed": "25", "brim_width": "0", "brim_object_gap": "0", "compatible_printers_condition": "", "print_sequence": "by layer", "default_acceleration": "0", + "outer_wall_acceleration": "0", "top_surface_acceleration": "0", "bridge_no_support": "0", "draft_shield": "disabled", - "elefant_foot_compensation": "0", + "elefant_foot_compensation": "0.1", "enable_arc_fitting": "0", - "outer_wall_line_width": "0.4", + "outer_wall_line_width": "0.5", "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", + "line_width": "0.5", "infill_direction": "45", - "sparse_infill_density": "15%", + "sparse_infill_density": "20%", "sparse_infill_pattern": "crosshatch", - "initial_layer_acceleration": "500", + "initial_layer_acceleration": "0", "travel_acceleration": "0", "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", + "initial_layer_line_width": "0.50", + "initial_layer_print_height": "0.425", "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "35%", + "sparse_infill_line_width": "0.50", + "infill_wall_overlap": "25%", "interface_shells": "0", "ironing_flow": "15%", "ironing_spacing": "0.1", @@ -49,7 +50,7 @@ "overhang_2_4_speed": "20", "overhang_3_4_speed": "15", "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", + "inner_wall_line_width": "0.50", "wall_loops": "2", "print_settings_id": "", "raft_layers": "0", @@ -66,9 +67,9 @@ "support_type": "normal(auto)", "support_style": "grid", "support_on_build_plate_only": "0", - "support_top_z_distance": "0.2", + "support_top_z_distance": "0.19", "support_filament": "0", - "support_line_width": "0.4", + "support_line_width": "0.5", "support_interface_loop_pattern": "0", "support_interface_filament": "0", "support_interface_top_layers": "3", @@ -77,31 +78,31 @@ "support_interface_speed": "100%", "support_base_pattern": "rectilinear", "support_base_pattern_spacing": "0.2", - "support_speed": "60", + "support_speed": "40", "support_threshold_angle": "30", - "support_object_xy_distance": "50%", + "support_object_xy_distance": "60%", "tree_support_branch_angle": "40", "tree_support_wall_count": "0", "detect_thin_wall": "1", "top_surface_pattern": "monotonicline", - "top_surface_line_width": "0.4", - "top_shell_layers": "4", - "top_shell_thickness": "0.8", + "top_surface_line_width": "0.5", + "top_shell_layers": "5", + "top_shell_thickness": "1.0", "initial_layer_speed": "35%", "initial_layer_infill_speed": "35%", - "outer_wall_speed": "200", - "inner_wall_speed": "300", - "internal_solid_infill_speed": "250", - "top_surface_speed": "200", - "gap_infill_speed": "250", - "sparse_infill_speed": "270", - "travel_speed": "150", + "outer_wall_speed": "40", + "inner_wall_speed": "45", + "internal_solid_infill_speed": "40", + "top_surface_speed": "30", + "gap_infill_speed": "30", + "sparse_infill_speed": "60", + "travel_speed": "175", "enable_prime_tower": "1", "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", + "prime_tower_width": "30", "xy_hole_compensation": "0", "xy_contour_compensation": "0", "compatible_printers": [ - "UltiMaker 2 0.4 nozzle" + "Lulzbot Mini 1 0.5 nozzle" ] } diff --git a/resources/profiles/M3D.json b/resources/profiles/M3D.json index a4231e878e..9140a8797b 100644 --- a/resources/profiles/M3D.json +++ b/resources/profiles/M3D.json @@ -1,6 +1,6 @@ { "name": "M3D", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "Configuration for M3D printers", "machine_model_list": [ diff --git a/resources/profiles/M3D/machine/M3D Enabler D7500 0.4 nozzle.json b/resources/profiles/M3D/machine/M3D Enabler D7500 0.4 nozzle.json index 9888c656b8..ad15070b64 100644 --- a/resources/profiles/M3D/machine/M3D Enabler D7500 0.4 nozzle.json +++ b/resources/profiles/M3D/machine/M3D Enabler D7500 0.4 nozzle.json @@ -32,27 +32,35 @@ "machine_end_gcode": "M104 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG1 X0 Y140\nG1 Y150 F4000\nM18 X Y E\nM18 S36000", "machine_load_filament_time": "0.5", "machine_max_acceleration_e": [ + "10000", "10000" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "400", "400" ], "machine_max_speed_e": [ + "30", "30" ], "machine_max_speed_x": [ + "60", "60" ], "machine_max_speed_y": [ + "60", "60" ], "machine_max_speed_z": [ + "12", "12" ], "machine_start_gcode": "M104 S{first_layer_temperature[0]} ; Begin Heating\n\nG91 ; Relative coordinates\nG1 Z10 ; Lift the head abit\nG90 ; Back to absolute coordinates\nG28 ; Home All\nG1 Z10 F500 ; Dont want to burn the bed while heating\nM109 S{first_layer_temperature[0]} ; Wait for pre-heat\n; Prime the extruder\nG92 E0 ; Set Extruder position to be 0\nG1 E5 F100 ; Extrude a bit in the air\nG1 X0 Y5 Z0.1 F500 ; Touch Down\nG92 E0 ; Set Extruder position to be 0\nG1 X100 Z0.3 E10 F500 ; Nozzle wipe\nG92 E0 ; Set Extruder position to be 0", diff --git a/resources/profiles/M3D/machine/M3D Enabler D8500 0.4 nozzle.json b/resources/profiles/M3D/machine/M3D Enabler D8500 0.4 nozzle.json index e57e6aeb8e..ee54cae8e5 100644 --- a/resources/profiles/M3D/machine/M3D Enabler D8500 0.4 nozzle.json +++ b/resources/profiles/M3D/machine/M3D Enabler D8500 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "machine", "name": "M3D Enabler D8500 0.4 nozzle", - "inherits": "fdm_machine_common", "renamed_from": "M3D Enabler D8500 MM", + "inherits": "fdm_machine_common", "from": "system", "setting_id": "xdGprcdFiVkG5vT2", "instantiation": "true", @@ -37,34 +37,50 @@ "machine_end_gcode": "; ===== ORCA END GCODE =====\nM400\nM83\nG92 E0\nG1 E-17 F1800 ; retract BEFORE any moves or power changes\n\n; Now lift and park\nG91\nG1 Z2 F2000\nG90\nG1 X100 Y160 F3000 ; parking point\n\n; Power down in order\nM104 T0 S0\nM104 T1 S0\nM106 S50 ; keep fan at ~50% while cooling (adjust if desired)\n; (Leave steppers on by omitting M84)\n; ===== END ORCA END GCODE =====\n", "machine_load_filament_time": "0.5", "machine_max_acceleration_e": [ + "10000", + "10000", "10000", "10000" ], "machine_max_acceleration_x": [ + "2000", + "2000", "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", + "2000", "2000", "2000" ], "machine_max_acceleration_z": [ + "400", + "400", "400", "400" ], "machine_max_speed_e": [ + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "400", + "400", "400", "400" ], "machine_max_speed_y": [ + "300", + "300", "300", "300" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], @@ -86,7 +102,10 @@ "0.4", "0.4" ], - "nozzle_type": "brass", + "nozzle_type": [ + "brass", + "brass" + ], "print_host": "m3d-enabler.local", "printable_area": [ "0x0", diff --git a/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D8500.json b/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D8500.json index 10c103af8d..a1e96478ed 100644 --- a/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D8500.json +++ b/resources/profiles/M3D/process/0.15mm Standard @M3D Enabler D8500.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.15mm Standard @M3D Enabler D8500", - "inherits": "fdm_process_common", "renamed_from": "0.15mm MM @D8500", + "inherits": "fdm_process_common", "from": "system", "setting_id": "69ArGbue7nQ5gO2r", "instantiation": "true", diff --git a/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D8500.json b/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D8500.json index dabf8c2dd0..1b24b64d8b 100644 --- a/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D8500.json +++ b/resources/profiles/M3D/process/0.20mm Standard @M3D Enabler D8500.json @@ -1,8 +1,8 @@ { "type": "process", "name": "0.20mm Standard @M3D Enabler D8500", - "inherits": "fdm_process_common", "renamed_from": "0.20mm MM @D8500", + "inherits": "fdm_process_common", "from": "system", "setting_id": "gg3RzTI5TgWRX2Hh", "instantiation": "true", diff --git a/resources/profiles/MagicMaker.json b/resources/profiles/MagicMaker.json index 08e5774547..f223b51f10 100644 --- a/resources/profiles/MagicMaker.json +++ b/resources/profiles/MagicMaker.json @@ -1,6 +1,6 @@ { "name": "MagicMaker", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "MagicMaker configurations", "machine_model_list": [ diff --git a/resources/profiles/MagicMaker/filament/Generic PEEK @MM.json b/resources/profiles/MagicMaker/filament/Generic PEEK @MM.json index 6915058856..101f4049e4 100644 --- a/resources/profiles/MagicMaker/filament/Generic PEEK @MM.json +++ b/resources/profiles/MagicMaker/filament/Generic PEEK @MM.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PEEK @MM", - "inherits": "fdm_filament_peek", "renamed_from": "MM Generic PEEK", + "inherits": "fdm_filament_peek", "from": "system", "setting_id": "2xiVNAQTwBaiLjJn", "filament_id": "OFz5oHgf", diff --git a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json index 91054a666d..1ff55a7702 100644 --- a/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM BoneKing 0.4 nozzle.json @@ -76,6 +76,7 @@ "Generic PLA @System" ], "machine_max_acceleration_e": [ + "10000", "10000" ], "machine_max_acceleration_extruding": [ diff --git a/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json index c1b219aae0..ef1cd2354c 100644 --- a/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM hj SK 0.4 nozzle.json @@ -51,6 +51,7 @@ "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_speed_e": [ diff --git a/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json index fdfc49385a..6dff59135f 100644 --- a/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM hqs SF 0.4 nozzle.json @@ -49,6 +49,7 @@ "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_speed_e": [ diff --git a/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json index 9760c8382b..8e147c5284 100644 --- a/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM hqs hj 0.4 nozzle.json @@ -60,6 +60,7 @@ "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_speed_e": [ diff --git a/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json b/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json index 7c71afe855..fd64db2ef7 100644 --- a/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json +++ b/resources/profiles/MagicMaker/machine/MM slb 0.4 nozzle.json @@ -49,6 +49,7 @@ "extruder_clearance_height_to_rod": "32", "extruder_clearance_radius": "50", "machine_max_acceleration_e": [ + "4000", "4000" ], "machine_max_speed_e": [ diff --git a/resources/profiles/Meltingplot.json b/resources/profiles/Meltingplot.json index 654d955380..78277c2966 100644 --- a/resources/profiles/Meltingplot.json +++ b/resources/profiles/Meltingplot.json @@ -1,6 +1,6 @@ { "name": "Meltingplot", - "version": "02.04.00.00", + "version": "02.04.00.01", "force_update": "0", "description": "Meltingplot configurations", "machine_model_list": [ diff --git a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.4 nozzle.json index 1f759767fa..d0e99e29e7 100644 --- a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "AL4mb7soA7L0FKTb", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "10" ], diff --git a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.6 nozzle.json index c7984aa06d..0d4a82630a 100644 --- a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "OCnoqOQbcfgikNmA", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "15" ], diff --git a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.8 nozzle.json index a28a1feca0..7a416adeb2 100644 --- a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "HO2NCV1i1l21mokh", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "20" ], diff --git a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @1.0 nozzle.json index 545acdf113..afe41dfb47 100644 --- a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "dRH4HfWHQPwo33cP", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "25" ], diff --git a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt.json b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt.json index b9f864f79f..6ef4a397b2 100644 --- a/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt.json +++ b/resources/profiles/Meltingplot/filament/Extrudr PLA NX2 Matt.json @@ -6,6 +6,9 @@ "setting_id": "qmPRaTcPlmtk6zB2", "filament_id": "OF1PznHI", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Extrudr" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.4 nozzle.json index 837e55a36f..d5838a8bbc 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "NjuuWYHSc7IlwWAy", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "11" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.6 nozzle.json index d73964b709..add93bc87d 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "md24RPsRyxBhGRoW", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "16" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.8 nozzle.json index 82c5ed8935..c5e7bcb0ca 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ABS @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "Y2LYeWL7Zxel3m0c", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ABS @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ABS @1.0 nozzle.json index a74a3a1925..e69535f635 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ABS @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ABS @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "G2UYPHTEWjun65jj", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "27" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ABS.json b/resources/profiles/Meltingplot/filament/Meltingplot ABS.json index c947cd55e9..391c1b2233 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ABS.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ABS.json @@ -6,6 +6,9 @@ "setting_id": "zVQixgSSn1jm1c7n", "filament_id": "OFVIMei2", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Meltingplot" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.4 nozzle.json index f567231b8d..4257ef5d1e 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "4EBXMyiXoLrw5rLC", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "11" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.6 nozzle.json index 96553662a8..82313a70a6 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "2UdzXwYGT5nqtcdK", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "16" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.8 nozzle.json index 9e6d846c7f..92e4fb5ad2 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ASA @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "4hk1aKrMkppVYH4z", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ASA @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot ASA @1.0 nozzle.json index e8bc7d7a32..6f69297c3f 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ASA @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ASA @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "JRSnSdwkvrQx8uH8", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "27" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot ASA.json b/resources/profiles/Meltingplot/filament/Meltingplot ASA.json index 180ef14e39..908fef6e95 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot ASA.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot ASA.json @@ -6,6 +6,9 @@ "setting_id": "5VuPxdOXfTIidM4X", "filament_id": "OFRdywGp", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Meltingplot" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.4 nozzle.json index 5fd012ed93..ee4e17948e 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "yUlzU6KMVx8bpxj1", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "7" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.6 nozzle.json index 4ece916d20..a07615dfd6 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "9XzYyYbJ4jnO4nhJ", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "11" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.8 nozzle.json index b1b4d489f8..edd3918a77 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "BMbLehqxegpSvMci", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "15" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @1.0 nozzle.json index b2ab6f3cf5..197bf260b4 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "7R3XuQlzD8IHq4PZ", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "18" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT.json b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT.json index 6b2852b4b2..f1a9f8f3d4 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PA6 CF HT.json @@ -6,6 +6,9 @@ "setting_id": "kzlYLTM6H5CgpQ8y", "filament_id": "OFdPevOo", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Meltingplot" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.4 nozzle.json index f828906a7c..e3696dd899 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "2fkQa1BwTGZbSi2z", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "10" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.6 nozzle.json index 11b9bb2550..c2d529b818 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "PcNAj2kwuUNBAjQE", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "16" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.8 nozzle.json index 20039024ce..91e9f9aef8 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "70EwKatuncZBKgoD", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "21" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @1.0 nozzle.json index 9913b5f812..7995a32bfa 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15 @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "X2yhWBjK4j46bUYW", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "26" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15.json b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15.json index f932be9d05..4166040fad 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PET-CF15.json @@ -6,6 +6,9 @@ "setting_id": "IdqfEh7xRXKTYmV3", "filament_id": "OFJdf5nt", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Meltingplot" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.4 nozzle.json index 55df65bb99..edef02255f 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "2ohDGd34awK2DVbV", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "9" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.6 nozzle.json index 5d77c69c8f..fc5cd4fc2d 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "DZe1WokuOM5byttU", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "14" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.8 nozzle.json index 4e5f16b411..699bb146a2 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PETG @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "LwFY7N8Uisy6ivOV", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "18" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PETG @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PETG @1.0 nozzle.json index cdc4620078..87129aae8e 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PETG @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PETG @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "kR8Vbizk0CPciCbD", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "23" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PETG.json b/resources/profiles/Meltingplot/filament/Meltingplot PETG.json index d6ed4e25cb..f6085221b2 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PETG.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PETG.json @@ -6,6 +6,9 @@ "setting_id": "dsW7JrzWhKAY1fey", "filament_id": "OFvlreVF", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Meltingplot" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.4 nozzle.json index 4ec8bc1fb5..70794f0c92 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "T3OEfrhyZ6ISyv20", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "11" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.6 nozzle.json index 054bc03ab6..17bc575326 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "hsgzwjPc26BJ4sQu", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "16" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.8 nozzle.json index 7fa45fc182..21860142a0 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PLA @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "cz6RkfsQ0hJE0hYG", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PLA @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot PLA @1.0 nozzle.json index bbb19233db..f7d2138e9c 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PLA @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PLA @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "H3n0VPl3CymiK9VN", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "27" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot PLA.json b/resources/profiles/Meltingplot/filament/Meltingplot PLA.json index 60575e7aa6..d6eaeebaed 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot PLA.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot PLA.json @@ -6,6 +6,9 @@ "setting_id": "ONpaHlfJVJyh7Shb", "filament_id": "OFwXRVbB", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Meltingplot" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.4 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.4 nozzle.json index 6804806002..96c2e1a130 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.4 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.4 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "i5ttRpqpqF3Kg8IF", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "11" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.6 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.6 nozzle.json index a80febac3f..766ac02cc6 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.6 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.6 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "Vbm6NJb4il6QAU6v", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "16" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.8 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.8 nozzle.json index 3815b36da9..df6e98bf92 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.8 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @0.8 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "jYrElhVPtK2Dpb9K", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "22" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @1.0 nozzle.json b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @1.0 nozzle.json index 51ccd444e2..b9e3adad88 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot TitanX @1.0 nozzle.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot TitanX @1.0 nozzle.json @@ -5,6 +5,9 @@ "from": "system", "setting_id": "lQDEFxTsxFsT5A4n", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ "27" ], diff --git a/resources/profiles/Meltingplot/filament/Meltingplot TitanX.json b/resources/profiles/Meltingplot/filament/Meltingplot TitanX.json index 5082e6e19e..f3ae8c8a23 100644 --- a/resources/profiles/Meltingplot/filament/Meltingplot TitanX.json +++ b/resources/profiles/Meltingplot/filament/Meltingplot TitanX.json @@ -6,6 +6,9 @@ "setting_id": "LDPRmxlvX97NXF0F", "filament_id": "OFyYfgDM", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Meltingplot" ], diff --git a/resources/profiles/OpenEYE.json b/resources/profiles/OpenEYE.json index 36f4ae9fac..07ba99b088 100644 --- a/resources/profiles/OpenEYE.json +++ b/resources/profiles/OpenEYE.json @@ -1,7 +1,7 @@ { "name": "OpenEYE", "url": "http://www.openeye.tech", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "OpenEYE Printers Configurations", "machine_model_list": [ diff --git a/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json b/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json index 8a3ce9de77..591bb61c09 100644 --- a/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json +++ b/resources/profiles/OpenEYE/machine/OpenEYE Peacock V2 0.4 nozzle.json @@ -1,9 +1,12 @@ { + "type": "machine", + "name": "OpenEYE Peacock V2 0.4 nozzle", + "inherits": "fdm_openeye_common", + "from": "system", + "setting_id": "iJqPJqKBFJvagyMn", + "instantiation": "true", "default_print_profile": "0.20mm Standard @OpenEYE Peacock V2", "default_bed_type": "Textured PEI Plate", - "from": "system", - "inherits": "fdm_openeye_common", - "instantiation": "true", "adaptive_bed_mesh_margin": "10", "bed_mesh_max": "211,211", "bed_mesh_min": "1.5,7", @@ -29,7 +32,6 @@ "machine_pause_gcode": "PAUSE", "machine_start_gcode": "SET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nMMU_START_SETUP INITIAL_TOOL={initial_tool} TOTAL_TOOLCHANGES=!total_toolchanges! REFERENCED_TOOLS=!referenced_tools! TOOL_COLORS=!colors! TOOL_TEMPS=!temperatures! TOOL_MATERIALS=!materials! FILAMENT_NAMES=!filament_names! PURGE_VOLUMES=!purge_volumes!\nMMU_START_CHECK\nSTART_PRINT BED_TEMP=[bed_temperature_initial_layer] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TYPE=\"{curr_bed_type}\" MESH_MIN={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} MESH_MAX={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE_MARGIN={adaptive_bed_mesh_margin}\n; Enter YOUR exist start_print macro call here (minus purging logic because tool may not be loaded yet)\nMMU_START_LOAD_INITIAL_TOOL\n; Optionally add YOUR additional start logic (like purging) here to run just prior to start\nSTART_PRINT_SECONDARY\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} ; For pause at layer functionality and better print stats", "machine_unload_filament_time": "30", - "name": "OpenEYE Peacock V2 0.4 nozzle", "nozzle_diameter": [ "0.4" ], @@ -43,9 +45,6 @@ "printer_model": "OpenEYE Peacock V2", "printer_variant": "0.4", "retract_lift_below": [ - "180", "180" - ], - "setting_id": "iJqPJqKBFJvagyMn", - "type": "machine" + ] } diff --git a/resources/profiles/OrcaArena.json b/resources/profiles/OrcaArena.json index 9bb97fb232..582bd47577 100644 --- a/resources/profiles/OrcaArena.json +++ b/resources/profiles/OrcaArena.json @@ -1,7 +1,7 @@ { "name": "Orca Arena Printer", "url": "", - "version": "02.04.00.07", + "version": "02.04.00.08", "force_update": "0", "description": "Orca Arena configuration files", "machine_model_list": [ diff --git a/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena 0.2 nozzle.json b/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena 0.2 nozzle.json index f98408fe0f..06fafc1e6d 100644 --- a/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena 0.2 nozzle.json +++ b/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @OrcaArena 0.2 nozzle", - "inherits": "Generic ABS @OrcaArena base", "renamed_from": "OrcaArena Generic ABS @0.2 nozzle;OrcaArena Generic ABS 0.2 nozzle", + "inherits": "Generic ABS @OrcaArena base", "from": "system", "setting_id": "mzx0hG9Xe9fIrkrW", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena.json index 2a505d7ca1..3cdcc432e7 100644 --- a/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic ABS @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @OrcaArena", - "inherits": "Generic ABS @OrcaArena base", "renamed_from": "OrcaArena Generic ABS", + "inherits": "Generic ABS @OrcaArena base", "from": "system", "setting_id": "ftTPQmVmsaD0n1GF", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena 0.2 nozzle.json b/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena 0.2 nozzle.json index 77bd051b4e..dfa3a1c768 100644 --- a/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena 0.2 nozzle.json +++ b/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @OrcaArena 0.2 nozzle", - "inherits": "Generic ASA @OrcaArena base", "renamed_from": "OrcaArena Generic ASA @0.2 nozzle;OrcaArena Generic ASA 0.2 nozzle", + "inherits": "Generic ASA @OrcaArena base", "from": "system", "setting_id": "rtFj6gFceWHdzTmO", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena.json index 0ee8d6cc20..5566524b6b 100644 --- a/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic ASA @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @OrcaArena", - "inherits": "Generic ASA @OrcaArena base", "renamed_from": "OrcaArena Generic ASA", + "inherits": "Generic ASA @OrcaArena base", "from": "system", "setting_id": "V2Z1rxHqIqIuwP5O", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PA @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PA @OrcaArena.json index 87b0a67ed8..bd158cb214 100644 --- a/resources/profiles/OrcaArena/filament/Generic PA @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PA @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @OrcaArena", - "inherits": "fdm_filament_pa", "renamed_from": "OrcaArena Generic PA", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "KScdeqdB3UR6uvxs", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/OrcaArena/filament/Generic PA-CF @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PA-CF @OrcaArena.json index 2d928201b7..725379b2b2 100644 --- a/resources/profiles/OrcaArena/filament/Generic PA-CF @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PA-CF @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @OrcaArena", - "inherits": "fdm_filament_pa", "renamed_from": "OrcaArena Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "xANIesGhsXwbTn3J", "filament_id": "OFQLcbps", diff --git a/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena 0.2 nozzle.json b/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena 0.2 nozzle.json index ad15f49a69..cfad14e592 100644 --- a/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena 0.2 nozzle.json +++ b/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @OrcaArena 0.2 nozzle", - "inherits": "Generic PC @OrcaArena base", "renamed_from": "OrcaArena Generic PC @0.2 nozzle;OrcaArena Generic PC 0.2 nozzle", + "inherits": "Generic PC @OrcaArena base", "from": "system", "setting_id": "AEKvB4RVBo2zOkdg", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena.json index b4302c3c47..8d912f314d 100644 --- a/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PC @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @OrcaArena", - "inherits": "Generic PC @OrcaArena base", "renamed_from": "OrcaArena Generic PC", + "inherits": "Generic PC @OrcaArena base", "from": "system", "setting_id": "He4O4h8oEFsySDIJ", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena 0.2 nozzle.json b/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena 0.2 nozzle.json index 1be2988356..f61bd4a93c 100644 --- a/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena 0.2 nozzle.json +++ b/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @OrcaArena 0.2 nozzle", - "inherits": "Generic PETG @OrcaArena base", "renamed_from": "OrcaArena Generic PETG @0.2 nozzle;OrcaArena Generic PETG 0.2 nozzle", + "inherits": "Generic PETG @OrcaArena base", "from": "system", "setting_id": "ZstQ3h8DGCpRWQJN", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena.json index ad3260fe1c..1535697b43 100644 --- a/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PETG @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @OrcaArena", - "inherits": "Generic PETG @OrcaArena base", "renamed_from": "OrcaArena Generic PETG", + "inherits": "Generic PETG @OrcaArena base", "from": "system", "setting_id": "3puaC0EwFLvEnGH2", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PETG-CF @Arena X1C.json b/resources/profiles/OrcaArena/filament/Generic PETG-CF @Arena X1C.json index f8741a22a9..464391a198 100644 --- a/resources/profiles/OrcaArena/filament/Generic PETG-CF @Arena X1C.json +++ b/resources/profiles/OrcaArena/filament/Generic PETG-CF @Arena X1C.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Arena X1C", - "inherits": "Generic PETG-CF @OrcaArena base", "renamed_from": "OrcaArena Generic PETG-CF @Arena X1C;OrcaArena Generic PETG-CF Arena X1C", + "inherits": "Generic PETG-CF @OrcaArena base", "from": "system", "setting_id": "MeIL8qLFZytjvYrF", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena 0.2 nozzle.json b/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena 0.2 nozzle.json index 074732db01..03561223e1 100644 --- a/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena 0.2 nozzle.json +++ b/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @OrcaArena 0.2 nozzle", - "inherits": "Generic PLA @OrcaArena base", "renamed_from": "OrcaArena Generic PLA @0.2 nozzle;OrcaArena Generic PLA 0.2 nozzle", + "inherits": "Generic PLA @OrcaArena base", "from": "system", "setting_id": "HjJH9JT9x9sFtVES", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena.json index 9018f24583..df02e7a649 100644 --- a/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PLA @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @OrcaArena", - "inherits": "Generic PLA @OrcaArena base", "renamed_from": "OrcaArena Generic PLA", + "inherits": "Generic PLA @OrcaArena base", "from": "system", "setting_id": "TfkkCc6rILxDiZhR", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PLA Silk @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PLA Silk @OrcaArena.json index 6afb0e48a2..69fbf67886 100644 --- a/resources/profiles/OrcaArena/filament/Generic PLA Silk @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PLA Silk @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @OrcaArena", - "inherits": "Generic PLA Silk @OrcaArena base", "renamed_from": "OrcaArena Generic PLA Silk", + "inherits": "Generic PLA Silk @OrcaArena base", "from": "system", "setting_id": "rvJjX9QsHM1O1CGD", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PLA-CF @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PLA-CF @OrcaArena.json index ced9245904..6e5423f31b 100644 --- a/resources/profiles/OrcaArena/filament/Generic PLA-CF @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PLA-CF @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @OrcaArena", - "inherits": "Generic PLA-CF @OrcaArena base", "renamed_from": "OrcaArena Generic PLA-CF", + "inherits": "Generic PLA-CF @OrcaArena base", "from": "system", "setting_id": "vexlQFuvVzpsYT0Z", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena 0.2 nozzle.json b/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena 0.2 nozzle.json index 417ef65683..65f69a90ab 100644 --- a/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena 0.2 nozzle.json +++ b/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @OrcaArena 0.2 nozzle", - "inherits": "Generic PVA @OrcaArena base", "renamed_from": "OrcaArena Generic PVA @0.2 nozzle;OrcaArena Generic PVA 0.2 nozzle", + "inherits": "Generic PVA @OrcaArena base", "from": "system", "setting_id": "jX00tEZaqsJvpoBT", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena.json index bf9cbcda7a..575fa261c0 100644 --- a/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic PVA @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @OrcaArena", - "inherits": "Generic PVA @OrcaArena base", "renamed_from": "OrcaArena Generic PVA", + "inherits": "Generic PVA @OrcaArena base", "from": "system", "setting_id": "S9TMm0n7t54fKHoM", "instantiation": "true", diff --git a/resources/profiles/OrcaArena/filament/Generic TPU @OrcaArena.json b/resources/profiles/OrcaArena/filament/Generic TPU @OrcaArena.json index 75fcc13a79..84ae780686 100644 --- a/resources/profiles/OrcaArena/filament/Generic TPU @OrcaArena.json +++ b/resources/profiles/OrcaArena/filament/Generic TPU @OrcaArena.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @OrcaArena", - "inherits": "fdm_filament_tpu", "renamed_from": "OrcaArena Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "GBRnBtqYf9H8pQKU", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/OrcaFilamentLibrary.json b/resources/profiles/OrcaFilamentLibrary.json index fa97f3492f..084a12993f 100644 --- a/resources/profiles/OrcaFilamentLibrary.json +++ b/resources/profiles/OrcaFilamentLibrary.json @@ -1,6 +1,6 @@ { "name": "OrcaFilamentLibrary", - "version": "02.04.00.10", + "version": "02.04.00.15", "force_update": "0", "description": "Orca Filament Library", "filament_list": [ @@ -92,10 +92,18 @@ "name": "fdm_filament_tpu", "sub_path": "filament/base/fdm_filament_tpu.json" }, + { + "name": "FusRock ABS-GF @BBL base", + "sub_path": "filament/FusRock/BBL/FusRock ABS-GF @BBL base.json" + }, { "name": "FusRock ABS-GF @System", "sub_path": "filament/FusRock/FusRock ABS-GF @System.json" }, + { + "name": "BETA ABS @base", + "sub_path": "filament/BETA/BETA ABS @base.json" + }, { "name": "Bambu ABS @base", "sub_path": "filament/Bambu/Bambu ABS @base.json" @@ -140,6 +148,10 @@ "name": "FDplast ABS @base", "sub_path": "filament/FDplast/FDplast ABS @base.json" }, + { + "name": "Generic ABS @BBL base", + "sub_path": "filament/addnorth/BBL/Generic ABS @BBL base.json" + }, { "name": "Generic ABS @System", "sub_path": "filament/Generic ABS @System.json" @@ -160,6 +172,10 @@ "name": "Printalot ABS @base", "sub_path": "filament/Printalot/Printalot ABS @base.json" }, + { + "name": "BETA ASA @base", + "sub_path": "filament/BETA/BETA ASA @base.json" + }, { "name": "Bambu ASA @base", "sub_path": "filament/Bambu/Bambu ASA @base.json" @@ -224,6 +240,10 @@ "name": "Generic EVA @System", "sub_path": "filament/Generic EVA @System.json" }, + { + "name": "BETA HIPS @base", + "sub_path": "filament/BETA/BETA HIPS @base.json" + }, { "name": "FDplast HIPS @base", "sub_path": "filament/FDplast/FDplast HIPS @base.json" @@ -236,6 +256,10 @@ "name": "AliZ PA-CF @base", "sub_path": "filament/AliZ/AliZ PA-CF @base.json" }, + { + "name": "BETA PAHT-CF @base", + "sub_path": "filament/BETA/BETA PAHT-CF @base.json" + }, { "name": "Bambu PA-CF @base", "sub_path": "filament/Bambu/Bambu PA-CF @base.json" @@ -288,22 +312,46 @@ "name": "Fiberon PA12-CF @base", "sub_path": "filament/Polymaker/Fiberon PA12-CF @base.json" }, + { + "name": "Fiberon PA12-CF10 @base", + "sub_path": "filament/Polymaker/Fiberon PA12-CF10 @base.json" + }, { "name": "Fiberon PA6-CF @base", "sub_path": "filament/Polymaker/Fiberon PA6-CF @base.json" }, + { + "name": "Fiberon PA6-CF20 @base", + "sub_path": "filament/Polymaker/Fiberon PA6-CF20 @base.json" + }, { "name": "Fiberon PA6-GF @base", "sub_path": "filament/Polymaker/Fiberon PA6-GF @base.json" }, + { + "name": "Fiberon PA6-GF25 @base", + "sub_path": "filament/Polymaker/Fiberon PA6-GF25 @base.json" + }, { "name": "Fiberon PA612-CF @base", "sub_path": "filament/Polymaker/Fiberon PA612-CF @base.json" }, + { + "name": "Fiberon PA612-CF15 @base", + "sub_path": "filament/Polymaker/Fiberon PA612-CF15 @base.json" + }, + { + "name": "Generic PA @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PA @BBL base.json" + }, { "name": "Generic PA @System", "sub_path": "filament/Generic PA @System.json" }, + { + "name": "Generic PA-CF @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PA-CF @BBL base.json" + }, { "name": "Generic PA-CF @System", "sub_path": "filament/Generic PA-CF @System.json" @@ -328,6 +376,10 @@ "name": "Elegoo PC @base", "sub_path": "filament/Elegoo/Elegoo PC @base.json" }, + { + "name": "Generic PC @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PC @BBL base.json" + }, { "name": "Generic PC @System", "sub_path": "filament/Generic PC @System.json" @@ -352,6 +404,62 @@ "name": "AliZ PETG @base", "sub_path": "filament/AliZ/AliZ PETG @base.json" }, + { + "name": "BETA PETG @base", + "sub_path": "filament/BETA/BETA PETG @base.json" + }, + { + "name": "BETA PETG Fluorescence @base", + "sub_path": "filament/BETA/BETA PETG Fluorescence @base.json" + }, + { + "name": "BETA PETG Glitter @base", + "sub_path": "filament/BETA/BETA PETG Glitter @base.json" + }, + { + "name": "BETA PETG Glow @base", + "sub_path": "filament/BETA/BETA PETG Glow @base.json" + }, + { + "name": "BETA PETG Gradient @base", + "sub_path": "filament/BETA/BETA PETG Gradient @base.json" + }, + { + "name": "BETA PETG HF @base", + "sub_path": "filament/BETA/BETA PETG HF @base.json" + }, + { + "name": "BETA PETG Heat Color Change @base", + "sub_path": "filament/BETA/BETA PETG Heat Color Change @base.json" + }, + { + "name": "BETA PETG Marble @base", + "sub_path": "filament/BETA/BETA PETG Marble @base.json" + }, + { + "name": "BETA PETG Matte @base", + "sub_path": "filament/BETA/BETA PETG Matte @base.json" + }, + { + "name": "BETA PETG Metallic @base", + "sub_path": "filament/BETA/BETA PETG Metallic @base.json" + }, + { + "name": "BETA PETG Transparent @base", + "sub_path": "filament/BETA/BETA PETG Transparent @base.json" + }, + { + "name": "BETA PETG UV Color Change @base", + "sub_path": "filament/BETA/BETA PETG UV Color Change @base.json" + }, + { + "name": "BETA PETG-CF @base", + "sub_path": "filament/BETA/BETA PETG-CF @base.json" + }, + { + "name": "BETA PETG-GF @base", + "sub_path": "filament/BETA/BETA PETG-GF @base.json" + }, { "name": "Bambu PET-CF @base", "sub_path": "filament/Bambu/Bambu PET-CF @base.json" @@ -364,6 +472,10 @@ "name": "Bambu PETG HF @base", "sub_path": "filament/Bambu/Bambu PETG HF @base.json" }, + { + "name": "Bambu PETG Matte @base", + "sub_path": "filament/Bambu/Bambu PETG Matte @base.json" + }, { "name": "Bambu PETG Translucent @base", "sub_path": "filament/Bambu/Bambu PETG Translucent @base.json" @@ -420,6 +532,10 @@ "name": "Fiberon PET-CF @base", "sub_path": "filament/Polymaker/Fiberon PET-CF @base.json" }, + { + "name": "Fiberon PET-CF17 @base", + "sub_path": "filament/Polymaker/Fiberon PET-CF17 @base.json" + }, { "name": "Fiberon PETG-ESD @base", "sub_path": "filament/Polymaker/Fiberon PETG-ESD @base.json" @@ -428,10 +544,18 @@ "name": "Fiberon PETG-rCF @base", "sub_path": "filament/Polymaker/Fiberon PETG-rCF @base.json" }, + { + "name": "Fiberon PETG-rCF08 @base", + "sub_path": "filament/Polymaker/Fiberon PETG-rCF08 @base.json" + }, { "name": "FilAr PETG @base", "sub_path": "filament/FilAr/FilAr PETG @base.json" }, + { + "name": "Generic PETG @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PETG @BBL base.json" + }, { "name": "Generic PETG @System", "sub_path": "filament/Generic PETG @System.json" @@ -480,6 +604,90 @@ "name": "AliZ PLA @base", "sub_path": "filament/AliZ/AliZ PLA @base.json" }, + { + "name": "BETA PLA Basic @base", + "sub_path": "filament/BETA/BETA PLA Basic @base.json" + }, + { + "name": "BETA PLA Chameleon @base", + "sub_path": "filament/BETA/BETA PLA Chameleon @base.json" + }, + { + "name": "BETA PLA Fluorescence @base", + "sub_path": "filament/BETA/BETA PLA Fluorescence @base.json" + }, + { + "name": "BETA PLA Glitter @base", + "sub_path": "filament/BETA/BETA PLA Glitter @base.json" + }, + { + "name": "BETA PLA Glow @base", + "sub_path": "filament/BETA/BETA PLA Glow @base.json" + }, + { + "name": "BETA PLA Gradient @base", + "sub_path": "filament/BETA/BETA PLA Gradient @base.json" + }, + { + "name": "BETA PLA Heat Color Change @base", + "sub_path": "filament/BETA/BETA PLA Heat Color Change @base.json" + }, + { + "name": "BETA PLA High Speed @base", + "sub_path": "filament/BETA/BETA PLA High Speed @base.json" + }, + { + "name": "BETA PLA High Temp @base", + "sub_path": "filament/BETA/BETA PLA High Temp @base.json" + }, + { + "name": "BETA PLA Marble @base", + "sub_path": "filament/BETA/BETA PLA Marble @base.json" + }, + { + "name": "BETA PLA Matte @base", + "sub_path": "filament/BETA/BETA PLA Matte @base.json" + }, + { + "name": "BETA PLA Metal @base", + "sub_path": "filament/BETA/BETA PLA Metal @base.json" + }, + { + "name": "BETA PLA Metallic @base", + "sub_path": "filament/BETA/BETA PLA Metallic @base.json" + }, + { + "name": "BETA PLA PRO @base", + "sub_path": "filament/BETA/BETA PLA PRO @base.json" + }, + { + "name": "BETA PLA Silk @base", + "sub_path": "filament/BETA/BETA PLA Silk @base.json" + }, + { + "name": "BETA PLA Silk+ @base", + "sub_path": "filament/BETA/BETA PLA Silk+ @base.json" + }, + { + "name": "BETA PLA Transparent @base", + "sub_path": "filament/BETA/BETA PLA Transparent @base.json" + }, + { + "name": "BETA PLA UV Color Change @base", + "sub_path": "filament/BETA/BETA PLA UV Color Change @base.json" + }, + { + "name": "BETA PLA Wood @base", + "sub_path": "filament/BETA/BETA PLA Wood @base.json" + }, + { + "name": "BETA PLA Youth @base", + "sub_path": "filament/BETA/BETA PLA Youth @base.json" + }, + { + "name": "BETA PLA-CF @base", + "sub_path": "filament/BETA/BETA PLA-CF @base.json" + }, { "name": "Bambu PLA Aero @base", "sub_path": "filament/Bambu/Bambu PLA Aero @base.json" @@ -504,6 +712,10 @@ "name": "Bambu PLA Impact @base", "sub_path": "filament/Bambu/Bambu PLA Impact @base.json" }, + { + "name": "Bambu PLA Lite @base", + "sub_path": "filament/Bambu/Bambu PLA Lite @base.json" + }, { "name": "Bambu PLA Marble @base", "sub_path": "filament/Bambu/Bambu PLA Marble @base.json" @@ -516,6 +728,10 @@ "name": "Bambu PLA Metal @base", "sub_path": "filament/Bambu/Bambu PLA Metal @base.json" }, + { + "name": "Bambu PLA Pure @base", + "sub_path": "filament/Bambu/Bambu PLA Pure @base.json" + }, { "name": "Bambu PLA Silk @base", "sub_path": "filament/Bambu/Bambu PLA Silk @base.json" @@ -532,6 +748,14 @@ "name": "Bambu PLA Tough @base", "sub_path": "filament/Bambu/Bambu PLA Tough @base.json" }, + { + "name": "Bambu PLA Tough+ @base", + "sub_path": "filament/Bambu/Bambu PLA Tough+ @base.json" + }, + { + "name": "Bambu PLA Translucent @base", + "sub_path": "filament/Bambu/Bambu PLA Translucent @base.json" + }, { "name": "Bambu PLA Wood @base", "sub_path": "filament/Bambu/Bambu PLA Wood @base.json" @@ -636,10 +860,18 @@ "name": "FilAr PLA-mate @base", "sub_path": "filament/FilAr/FilAr PLA-mate @base.json" }, + { + "name": "Generic PLA @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PLA @BBL base.json" + }, { "name": "Generic PLA @System", "sub_path": "filament/Generic PLA @System.json" }, + { + "name": "Generic PLA High Speed @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PLA High Speed @BBL base.json" + }, { "name": "Generic PLA High Speed @System", "sub_path": "filament/Generic PLA High Speed @System.json" @@ -648,6 +880,14 @@ "name": "Generic PLA Matte @base", "sub_path": "filament/Generic PLA Matte @base.json" }, + { + "name": "Generic PLA Silk @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PLA Silk @BBL base.json" + }, + { + "name": "Generic PLA-CF @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PLA-CF @BBL base.json" + }, { "name": "Generic PLA-CF @System", "sub_path": "filament/Generic PLA-CF @System.json" @@ -772,18 +1012,54 @@ "name": "PlastAR PLA @base", "sub_path": "filament/Printalot/PlastAR PLA @base.json" }, + { + "name": "PolyLite CosPLA @base", + "sub_path": "filament/Polymaker/PolyLite CosPLA @base.json" + }, { "name": "PolyLite PLA @base", "sub_path": "filament/Polymaker/PolyLite PLA @base.json" }, + { + "name": "PolyLite PLA Galaxy @base", + "sub_path": "filament/Polymaker/PolyLite PLA Galaxy @base.json" + }, + { + "name": "PolyLite PLA Glow @base", + "sub_path": "filament/Polymaker/PolyLite PLA Glow @base.json" + }, + { + "name": "PolyLite PLA Luminous @base", + "sub_path": "filament/Polymaker/PolyLite PLA Luminous @base.json" + }, + { + "name": "PolyLite PLA Neon @base", + "sub_path": "filament/Polymaker/PolyLite PLA Neon @base.json" + }, { "name": "PolyLite PLA Pro @base", "sub_path": "filament/Polymaker/PolyLite PLA Pro @base.json" }, + { + "name": "PolyLite PLA Starlight @base", + "sub_path": "filament/Polymaker/PolyLite PLA Starlight @base.json" + }, + { + "name": "PolyLite PLA Translucent @base", + "sub_path": "filament/Polymaker/PolyLite PLA Translucent @base.json" + }, { "name": "PolyTerra PLA @base", "sub_path": "filament/Polymaker/PolyTerra PLA @base.json" }, + { + "name": "PolyTerra PLA Marble @base", + "sub_path": "filament/Polymaker/PolyTerra PLA Marble @base.json" + }, + { + "name": "PolyTerra PLA+ @base", + "sub_path": "filament/Polymaker/PolyTerra PLA+ @base.json" + }, { "name": "Polymaker HT-PLA @base", "sub_path": "filament/Polymaker/Polymaker HT-PLA @base.json" @@ -916,6 +1192,34 @@ "name": "Generic SBS @System", "sub_path": "filament/Generic SBS @System.json" }, + { + "name": "BETA PEBA 90A @base", + "sub_path": "filament/BETA/BETA PEBA 90A @base.json" + }, + { + "name": "BETA TPU 90A @base", + "sub_path": "filament/BETA/BETA TPU 90A @base.json" + }, + { + "name": "BETA TPU 95A @base", + "sub_path": "filament/BETA/BETA TPU 95A @base.json" + }, + { + "name": "BETA TPU 98A @base", + "sub_path": "filament/BETA/BETA TPU 98A @base.json" + }, + { + "name": "BETA TPU Matte @base", + "sub_path": "filament/BETA/BETA TPU Matte @base.json" + }, + { + "name": "Bambu TPU 85A @base", + "sub_path": "filament/Bambu/Bambu TPU 85A @base.json" + }, + { + "name": "Bambu TPU 90A @base", + "sub_path": "filament/Bambu/Bambu TPU 90A @base.json" + }, { "name": "Bambu TPU 95A @base", "sub_path": "filament/Bambu/Bambu TPU 95A @base.json" @@ -924,6 +1228,10 @@ "name": "Bambu TPU 95A HF @base", "sub_path": "filament/Bambu/Bambu TPU 95A HF @base.json" }, + { + "name": "Bambu TPU for AMS @base", + "sub_path": "filament/Bambu/Bambu TPU for AMS @base.json" + }, { "name": "COEX TPE 30D @base", "sub_path": "filament/COEX/COEX TPE 30D @base.json" @@ -968,6 +1276,10 @@ "name": "FDplast TPU @base", "sub_path": "filament/FDplast/FDplast TPU @base.json" }, + { + "name": "Generic TPU @BBL base", + "sub_path": "filament/addnorth/BBL/Generic TPU @BBL base.json" + }, { "name": "Generic TPU @System", "sub_path": "filament/Generic TPU @System.json" @@ -976,6 +1288,38 @@ "name": "Overture TPU @base", "sub_path": "filament/Overture/Overture TPU @base.json" }, + { + "name": "FusRock ABS-GF @BBL A1", + "sub_path": "filament/FusRock/BBL/FusRock ABS-GF @BBL A1.json" + }, + { + "name": "FusRock ABS-GF @BBL H2D", + "sub_path": "filament/FusRock/BBL/FusRock ABS-GF @BBL H2D.json" + }, + { + "name": "FusRock ABS-GF @BBL P1P", + "sub_path": "filament/FusRock/BBL/FusRock ABS-GF @BBL P1P.json" + }, + { + "name": "FusRock ABS-GF @BBL X1C", + "sub_path": "filament/FusRock/BBL/FusRock ABS-GF @BBL X1C.json" + }, + { + "name": "BETA ABS @BBL A1", + "sub_path": "filament/BETA/BBL/BETA ABS @BBL A1.json" + }, + { + "name": "BETA ABS @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA ABS @BBL H2D.json" + }, + { + "name": "BETA ABS @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA ABS @BBL P1P.json" + }, + { + "name": "BETA ABS @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA ABS @BBL X1C.json" + }, { "name": "Bambu ABS @System", "sub_path": "filament/Bambu/Bambu ABS @System.json" @@ -988,10 +1332,42 @@ "name": "Bambu Support for ABS @System", "sub_path": "filament/Bambu/Bambu Support for ABS @System.json" }, + { + "name": "COEX ABS @BBL X1", + "sub_path": "filament/COEX/BBL/COEX ABS @BBL X1.json" + }, + { + "name": "COEX ABS @BBL X1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX ABS @BBL X1 0.2 nozzle.json" + }, + { + "name": "COEX ABS @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX ABS @BBL X1C.json" + }, + { + "name": "COEX ABS @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX ABS @BBL X1C 0.2 nozzle.json" + }, { "name": "COEX ABS @System", "sub_path": "filament/COEX/COEX ABS @System.json" }, + { + "name": "COEX ABS PRIME @BBL X1", + "sub_path": "filament/COEX/BBL/COEX ABS PRIME @BBL X1.json" + }, + { + "name": "COEX ABS PRIME @BBL X1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX ABS PRIME @BBL X1 0.2 nozzle.json" + }, + { + "name": "COEX ABS PRIME @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX ABS PRIME @BBL X1C.json" + }, + { + "name": "COEX ABS PRIME @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX ABS PRIME @BBL X1C 0.2 nozzle.json" + }, { "name": "COEX ABS PRIME @System", "sub_path": "filament/COEX/COEX ABS PRIME @System.json" @@ -1016,6 +1392,10 @@ "name": "FDplast ABS @System", "sub_path": "filament/FDplast/FDplast ABS @System.json" }, + { + "name": "addnorth ABS rABS", + "sub_path": "filament/addnorth/BBL/addnorth ABS rABS.json" + }, { "name": "NIT ABS @System", "sub_path": "filament/NIT/NIT ABS @System.json" @@ -1032,6 +1412,18 @@ "name": "Printalot ABS @System", "sub_path": "filament/Printalot/Printalot ABS @System.json" }, + { + "name": "BETA ASA @BBL A1 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA ASA @BBL A1 0.4 nozzle.json" + }, + { + "name": "BETA ASA @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA ASA @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA ASA @BBL X1C 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA ASA @BBL X1C 0.4 nozzle.json" + }, { "name": "Bambu ASA @System", "sub_path": "filament/Bambu/Bambu ASA @System.json" @@ -1044,6 +1436,22 @@ "name": "Bambu ASA-CF @System", "sub_path": "filament/Bambu/Bambu ASA-CF @System.json" }, + { + "name": "COEX ASA PRIME @BBL X1", + "sub_path": "filament/COEX/BBL/COEX ASA PRIME @BBL X1.json" + }, + { + "name": "COEX ASA PRIME @BBL X1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX ASA PRIME @BBL X1 0.2 nozzle.json" + }, + { + "name": "COEX ASA PRIME @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX ASA PRIME @BBL X1C.json" + }, + { + "name": "COEX ASA PRIME @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX ASA PRIME @BBL X1C 0.2 nozzle.json" + }, { "name": "COEX ASA PRIME @System", "sub_path": "filament/COEX/COEX ASA PRIME @System.json" @@ -1072,6 +1480,22 @@ "name": "Elegoo ASA-CF @base", "sub_path": "filament/Elegoo/Elegoo ASA-CF @base.json" }, + { + "name": "Overture ASA @BBL X1", + "sub_path": "filament/Overture/BBL/Overture ASA @BBL X1.json" + }, + { + "name": "Overture ASA @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture ASA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture ASA @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture ASA @BBL X1C.json" + }, + { + "name": "Overture ASA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture ASA @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture ASA @System", "sub_path": "filament/Overture/Overture ASA @System.json" @@ -1080,14 +1504,38 @@ "name": "PolyLite ASA @System", "sub_path": "filament/Polymaker/PolyLite ASA @System.json" }, + { + "name": "BETA HIPS @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA HIPS @BBL H2D.json" + }, + { + "name": "BETA HIPS @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA HIPS @BBL X1C.json" + }, { "name": "FDplast HIPS @System", "sub_path": "filament/FDplast/FDplast HIPS @System.json" }, + { + "name": "AliZ PA-CF @P1-X1", + "sub_path": "filament/AliZ/BBL/AliZ PA-CF @P1-X1.json" + }, { "name": "AliZ PA-CF @System", "sub_path": "filament/AliZ/AliZ PA-CF @System.json" }, + { + "name": "BETA PAHT-CF @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PAHT-CF @BBL H2D.json" + }, + { + "name": "BETA PAHT-CF @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PAHT-CF @BBL P1P.json" + }, + { + "name": "BETA PAHT-CF @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PAHT-CF @BBL X1C.json" + }, { "name": "Bambu PA-CF @System", "sub_path": "filament/Bambu/Bambu PA-CF @System.json" @@ -1112,10 +1560,18 @@ "name": "Bambu Support G @System", "sub_path": "filament/Bambu/Bambu Support G @System.json" }, + { + "name": "COEX NYLEX PA6-CF @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX NYLEX PA6-CF @BBL X1C.json" + }, { "name": "COEX NYLEX PA6-CF @System", "sub_path": "filament/COEX/COEX NYLEX PA6-CF @System.json" }, + { + "name": "COEX NYLEX UNFILLED @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX NYLEX UNFILLED @BBL X1C.json" + }, { "name": "DREMC PA12-CF @System", "sub_path": "filament/DREMC/DREMC PA12-CF @System.json" @@ -1136,18 +1592,54 @@ "name": "Fiberon PA12-CF @System", "sub_path": "filament/Polymaker/Fiberon PA12-CF @System.json" }, + { + "name": "Fiberon PA12-CF10 @BBL X1", + "sub_path": "filament/Polymaker/BBL/Fiberon PA12-CF10 @BBL X1.json" + }, { "name": "Fiberon PA6-CF @System", "sub_path": "filament/Polymaker/Fiberon PA6-CF @System.json" }, + { + "name": "Fiberon PA6-CF20 @BBL X1", + "sub_path": "filament/Polymaker/BBL/Fiberon PA6-CF20 @BBL X1.json" + }, { "name": "Fiberon PA6-GF @System", "sub_path": "filament/Polymaker/Fiberon PA6-GF @System.json" }, + { + "name": "Fiberon PA6-GF25 @BBL X1", + "sub_path": "filament/Polymaker/BBL/Fiberon PA6-GF25 @BBL X1.json" + }, { "name": "Fiberon PA612-CF @System", "sub_path": "filament/Polymaker/Fiberon PA612-CF @System.json" }, + { + "name": "Fiberon PA612-CF15 @BBL X1", + "sub_path": "filament/Polymaker/BBL/Fiberon PA612-CF15 @BBL X1.json" + }, + { + "name": "addnorth PA Adura", + "sub_path": "filament/addnorth/BBL/addnorth PA Adura.json" + }, + { + "name": "addnorth PA Adura FDA", + "sub_path": "filament/addnorth/BBL/addnorth PA Adura FDA.json" + }, + { + "name": "addnorth PA6 Addlantis", + "sub_path": "filament/addnorth/BBL/addnorth PA6 Addlantis.json" + }, + { + "name": "addnorth PVDF Adamant S1", + "sub_path": "filament/addnorth/BBL/addnorth PVDF Adamant S1.json" + }, + { + "name": "addnorth PA-CF Adura X", + "sub_path": "filament/addnorth/BBL/addnorth PA-CF Adura X.json" + }, { "name": "INSLOGIC PA6-66 @BBL P2S", "sub_path": "filament/INSLOGIC/BBL/INSLOGIC PA6-66 @BBL P2S.json" @@ -1188,6 +1680,34 @@ "name": "Elegoo PC-FR @base", "sub_path": "filament/Elegoo/Elegoo PC-FR @base.json" }, + { + "name": "addnorth PC BLend HT LCF", + "sub_path": "filament/addnorth/BBL/addnorth PC BLend HT LCF.json" + }, + { + "name": "COEX PCTG PRIME @BBL A1", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL A1.json" + }, + { + "name": "COEX PCTG PRIME @BBL A1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.2 nozzle.json" + }, + { + "name": "COEX PCTG PRIME @BBL A1 0.8 nozzle", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.8 nozzle.json" + }, + { + "name": "COEX PCTG PRIME @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL X1C.json" + }, + { + "name": "COEX PCTG PRIME @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json" + }, + { + "name": "COEX PCTG PRIME @BBL X1C 0.8 nozzle", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json" + }, { "name": "COEX PCTG PRIME @System", "sub_path": "filament/COEX/COEX PCTG PRIME @System.json" @@ -1196,6 +1716,10 @@ "name": "Generic PE-CF @System", "sub_path": "filament/Generic PE-CF @System.json" }, + { + "name": "AliZ PETG @P1-X1", + "sub_path": "filament/AliZ/BBL/AliZ PETG @P1-X1.json" + }, { "name": "AliZ PETG @System", "sub_path": "filament/AliZ/AliZ PETG @System.json" @@ -1208,6 +1732,238 @@ "name": "AliZ PETG-Metal @base", "sub_path": "filament/AliZ/AliZ PETG-Metal @base.json" }, + { + "name": "BETA PETG @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG @BBL A1.json" + }, + { + "name": "BETA PETG @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG @BBL X1C.json" + }, + { + "name": "BETA PETG Fluorescence @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Fluorescence @BBL A1.json" + }, + { + "name": "BETA PETG Fluorescence @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Fluorescence @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Fluorescence @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Fluorescence @BBL X1C.json" + }, + { + "name": "BETA PETG Glitter @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Glitter @BBL A1.json" + }, + { + "name": "BETA PETG Glitter @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Glitter @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Glitter @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Glitter @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Glitter @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Glitter @BBL X1C.json" + }, + { + "name": "BETA PETG Glow @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Glow @BBL A1.json" + }, + { + "name": "BETA PETG Glow @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Glow @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Glow @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Glow @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Glow @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Glow @BBL X1C.json" + }, + { + "name": "BETA PETG Gradient @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Gradient @BBL A1.json" + }, + { + "name": "BETA PETG Gradient @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Gradient @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Gradient @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Gradient @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Gradient @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Gradient @BBL X1C.json" + }, + { + "name": "BETA PETG HF @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG HF @BBL A1.json" + }, + { + "name": "BETA PETG HF @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PETG HF @BBL A1M.json" + }, + { + "name": "BETA PETG HF @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG HF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG HF @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG HF @BBL X1C.json" + }, + { + "name": "BETA PETG Heat Color Change @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1.json" + }, + { + "name": "BETA PETG Heat Color Change @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Heat Color Change @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Heat Color Change @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Heat Color Change @BBL X1C.json" + }, + { + "name": "BETA PETG Marble @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Marble @BBL A1.json" + }, + { + "name": "BETA PETG Marble @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Marble @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Marble @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Marble @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Marble @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Marble @BBL X1C.json" + }, + { + "name": "BETA PETG Matte @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Matte @BBL A1.json" + }, + { + "name": "BETA PETG Matte @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Matte @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Matte @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Matte @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Matte @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Matte @BBL X1C.json" + }, + { + "name": "BETA PETG Metallic @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Metallic @BBL A1.json" + }, + { + "name": "BETA PETG Metallic @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Metallic @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG Metallic @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Metallic @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Metallic @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Metallic @BBL X1C.json" + }, + { + "name": "BETA PETG Transparent @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG Transparent @BBL A1.json" + }, + { + "name": "BETA PETG Transparent @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PETG Transparent @BBL A1M.json" + }, + { + "name": "BETA PETG Transparent @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG Transparent @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG Transparent @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG Transparent @BBL X1C.json" + }, + { + "name": "BETA PETG UV Color Change @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PETG UV Color Change @BBL A1.json" + }, + { + "name": "BETA PETG UV Color Change @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG UV Color Change @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG UV Color Change @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PETG UV Color Change @BBL X1C.json" + }, + { + "name": "BETA PETG-CF @BBL A1 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-CF @BBL A1 0.4 nozzle.json" + }, + { + "name": "BETA PETG-CF @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-CF @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG-CF @BBL P1P 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-CF @BBL P1P 0.4 nozzle.json" + }, + { + "name": "BETA PETG-CF @BBL X1C 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-CF @BBL X1C 0.4 nozzle.json" + }, + { + "name": "BETA PETG-GF @BBL A1 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-GF @BBL A1 0.4 nozzle.json" + }, + { + "name": "BETA PETG-GF @BBL A1M 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-GF @BBL A1M 0.4 nozzle.json" + }, + { + "name": "BETA PETG-GF @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-GF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PETG-GF @BBL P1P 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-GF @BBL P1P 0.4 nozzle.json" + }, + { + "name": "BETA PETG-GF @BBL X1C 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PETG-GF @BBL X1C 0.4 nozzle.json" + }, { "name": "Bambu PET-CF @System", "sub_path": "filament/Bambu/Bambu PET-CF @System.json" @@ -1220,6 +1976,10 @@ "name": "Bambu PETG HF @System", "sub_path": "filament/Bambu/Bambu PETG HF @System.json" }, + { + "name": "Bambu PETG Matte @System", + "sub_path": "filament/Bambu/Bambu PETG Matte @System.json" + }, { "name": "Bambu PETG Translucent @System", "sub_path": "filament/Bambu/Bambu PETG Translucent @System.json" @@ -1228,6 +1988,30 @@ "name": "Bambu PETG-CF @System", "sub_path": "filament/Bambu/Bambu PETG-CF @System.json" }, + { + "name": "COEX PETG @BBL A1", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL A1.json" + }, + { + "name": "COEX PETG @BBL A1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL A1 0.2 nozzle.json" + }, + { + "name": "COEX PETG @BBL A1 0.8 nozzle", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL A1 0.8 nozzle.json" + }, + { + "name": "COEX PETG @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL X1C.json" + }, + { + "name": "COEX PETG @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL X1C 0.2 nozzle.json" + }, + { + "name": "COEX PETG @BBL X1C 0.8 nozzle", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL X1C 0.8 nozzle.json" + }, { "name": "COEX PETG @System", "sub_path": "filament/COEX/COEX PETG @System.json" @@ -1292,6 +2076,14 @@ "name": "Fiberon PET-CF @System", "sub_path": "filament/Polymaker/Fiberon PET-CF @System.json" }, + { + "name": "Fiberon PET-CF17 @BBL X1", + "sub_path": "filament/Polymaker/BBL/Fiberon PET-CF17 @BBL X1.json" + }, + { + "name": "Fiberon PETG-ESD @BBL base", + "sub_path": "filament/Polymaker/BBL/Fiberon PETG-ESD @BBL base.json" + }, { "name": "Fiberon PETG-ESD @System", "sub_path": "filament/Polymaker/Fiberon PETG-ESD @System.json" @@ -1300,6 +2092,10 @@ "name": "Fiberon PETG-rCF @System", "sub_path": "filament/Polymaker/Fiberon PETG-rCF @System.json" }, + { + "name": "Fiberon PETG-rCF08 @BBL X1", + "sub_path": "filament/Polymaker/BBL/Fiberon PETG-rCF08 @BBL X1.json" + }, { "name": "FilAr PETG Amarillo Lima", "sub_path": "filament/FilAr/FilAr PETG Amarillo Lima.json" @@ -1356,10 +2152,38 @@ "name": "FilAr PETG Rojo Carmesi", "sub_path": "filament/FilAr/FilAr PETG Rojo Carmesi.json" }, + { + "name": "addnorth PETG Base", + "sub_path": "filament/addnorth/BBL/addnorth PETG Base.json" + }, + { + "name": "addnorth PETG ESD", + "sub_path": "filament/addnorth/BBL/addnorth PETG ESD.json" + }, + { + "name": "addnorth PETG Economy", + "sub_path": "filament/addnorth/BBL/addnorth PETG Economy.json" + }, + { + "name": "addnorth PETG Flame v0", + "sub_path": "filament/addnorth/BBL/addnorth PETG Flame v0.json" + }, + { + "name": "addnorth PETG PRO Matte", + "sub_path": "filament/addnorth/BBL/addnorth PETG PRO Matte.json" + }, + { + "name": "addnorth PETG rPETG Matte", + "sub_path": "filament/addnorth/BBL/addnorth PETG rPETG Matte.json" + }, { "name": "Generic PETG HF @System", "sub_path": "filament/Generic PETG HF @System.json" }, + { + "name": "Generic PETG-CF @BBL base", + "sub_path": "filament/addnorth/BBL/Generic PETG-CF @BBL base.json" + }, { "name": "Generic PETG-CF @System", "sub_path": "filament/Generic PETG-CF @System.json" @@ -1412,10 +2236,434 @@ "name": "eSUN PETG @System", "sub_path": "filament/eSUN/eSUN PETG @System.json" }, + { + "name": "AliZ PLA @P1-X1", + "sub_path": "filament/AliZ/BBL/AliZ PLA @P1-X1.json" + }, { "name": "AliZ PLA @System", "sub_path": "filament/AliZ/AliZ PLA @System.json" }, + { + "name": "BETA PLA Basic @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Basic @BBL A1.json" + }, + { + "name": "BETA PLA Basic @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Basic @BBL A1M.json" + }, + { + "name": "BETA PLA Basic @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Basic @BBL H2D.json" + }, + { + "name": "BETA PLA Basic @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Basic @BBL P1P.json" + }, + { + "name": "BETA PLA Basic @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Basic @BBL X1C.json" + }, + { + "name": "BETA PLA Chameleon @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Chameleon @BBL A1.json" + }, + { + "name": "BETA PLA Chameleon @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Chameleon @BBL A1M.json" + }, + { + "name": "BETA PLA Chameleon @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Chameleon @BBL H2D.json" + }, + { + "name": "BETA PLA Chameleon @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Chameleon @BBL P1P.json" + }, + { + "name": "BETA PLA Chameleon @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Chameleon @BBL X1C.json" + }, + { + "name": "BETA PLA Fluorescence @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Fluorescence @BBL A1.json" + }, + { + "name": "BETA PLA Fluorescence @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Fluorescence @BBL A1M.json" + }, + { + "name": "BETA PLA Fluorescence @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Fluorescence @BBL H2D.json" + }, + { + "name": "BETA PLA Fluorescence @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Fluorescence @BBL P1P.json" + }, + { + "name": "BETA PLA Fluorescence @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Fluorescence @BBL X1C.json" + }, + { + "name": "BETA PLA Glitter @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Glitter @BBL A1.json" + }, + { + "name": "BETA PLA Glitter @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Glitter @BBL A1M.json" + }, + { + "name": "BETA PLA Glitter @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Glitter @BBL H2D.json" + }, + { + "name": "BETA PLA Glitter @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Glitter @BBL P1P.json" + }, + { + "name": "BETA PLA Glitter @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Glitter @BBL X1C.json" + }, + { + "name": "BETA PLA Glow @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Glow @BBL A1.json" + }, + { + "name": "BETA PLA Glow @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Glow @BBL A1M.json" + }, + { + "name": "BETA PLA Glow @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Glow @BBL H2D.json" + }, + { + "name": "BETA PLA Glow @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Glow @BBL P1P.json" + }, + { + "name": "BETA PLA Glow @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Glow @BBL X1C.json" + }, + { + "name": "BETA PLA Gradient @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Gradient @BBL A1.json" + }, + { + "name": "BETA PLA Gradient @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Gradient @BBL A1M.json" + }, + { + "name": "BETA PLA Gradient @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Gradient @BBL H2D.json" + }, + { + "name": "BETA PLA Gradient @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Gradient @BBL P1P.json" + }, + { + "name": "BETA PLA Gradient @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Gradient @BBL X1C.json" + }, + { + "name": "BETA PLA Heat Color Change @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1.json" + }, + { + "name": "BETA PLA Heat Color Change @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1M.json" + }, + { + "name": "BETA PLA Heat Color Change @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Heat Color Change @BBL H2D.json" + }, + { + "name": "BETA PLA Heat Color Change @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Heat Color Change @BBL P1P.json" + }, + { + "name": "BETA PLA Heat Color Change @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Heat Color Change @BBL X1C.json" + }, + { + "name": "BETA PLA High Speed @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA High Speed @BBL A1.json" + }, + { + "name": "BETA PLA High Speed @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA High Speed @BBL A1M.json" + }, + { + "name": "BETA PLA High Speed @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA High Speed @BBL H2D.json" + }, + { + "name": "BETA PLA High Speed @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA High Speed @BBL P1P.json" + }, + { + "name": "BETA PLA High Speed @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA High Speed @BBL X1C.json" + }, + { + "name": "BETA PLA High Temp @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA High Temp @BBL A1.json" + }, + { + "name": "BETA PLA High Temp @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA High Temp @BBL A1M.json" + }, + { + "name": "BETA PLA High Temp @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA High Temp @BBL H2D.json" + }, + { + "name": "BETA PLA High Temp @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA High Temp @BBL P1P.json" + }, + { + "name": "BETA PLA High Temp @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA High Temp @BBL X1C.json" + }, + { + "name": "BETA PLA Marble @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Marble @BBL A1.json" + }, + { + "name": "BETA PLA Marble @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Marble @BBL A1M.json" + }, + { + "name": "BETA PLA Marble @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Marble @BBL H2D.json" + }, + { + "name": "BETA PLA Marble @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Marble @BBL P1P.json" + }, + { + "name": "BETA PLA Marble @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Marble @BBL X1C.json" + }, + { + "name": "BETA PLA Matte @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Matte @BBL A1.json" + }, + { + "name": "BETA PLA Matte @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Matte @BBL A1M.json" + }, + { + "name": "BETA PLA Matte @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Matte @BBL H2D.json" + }, + { + "name": "BETA PLA Matte @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Matte @BBL P1P.json" + }, + { + "name": "BETA PLA Matte @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Matte @BBL X1C.json" + }, + { + "name": "BETA PLA Metal @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Metal @BBL A1.json" + }, + { + "name": "BETA PLA Metal @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Metal @BBL A1M.json" + }, + { + "name": "BETA PLA Metal @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Metal @BBL H2D.json" + }, + { + "name": "BETA PLA Metal @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Metal @BBL P1P.json" + }, + { + "name": "BETA PLA Metal @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Metal @BBL X1C.json" + }, + { + "name": "BETA PLA Metallic @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Metallic @BBL A1.json" + }, + { + "name": "BETA PLA Metallic @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Metallic @BBL A1M.json" + }, + { + "name": "BETA PLA Metallic @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Metallic @BBL H2D.json" + }, + { + "name": "BETA PLA Metallic @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Metallic @BBL P1P.json" + }, + { + "name": "BETA PLA Metallic @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Metallic @BBL X1C.json" + }, + { + "name": "BETA PLA PRO @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA PRO @BBL A1.json" + }, + { + "name": "BETA PLA PRO @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA PRO @BBL A1M.json" + }, + { + "name": "BETA PLA PRO @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA PRO @BBL H2D.json" + }, + { + "name": "BETA PLA PRO @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA PRO @BBL P1P.json" + }, + { + "name": "BETA PLA PRO @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA PRO @BBL X1C.json" + }, + { + "name": "BETA PLA Silk @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Silk @BBL A1.json" + }, + { + "name": "BETA PLA Silk @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Silk @BBL A1M.json" + }, + { + "name": "BETA PLA Silk @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Silk @BBL H2D.json" + }, + { + "name": "BETA PLA Silk @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Silk @BBL P1P.json" + }, + { + "name": "BETA PLA Silk @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Silk @BBL X1C.json" + }, + { + "name": "BETA PLA Silk+ @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Silk+ @BBL A1.json" + }, + { + "name": "BETA PLA Silk+ @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Silk+ @BBL A1M.json" + }, + { + "name": "BETA PLA Silk+ @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Silk+ @BBL H2D.json" + }, + { + "name": "BETA PLA Silk+ @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Silk+ @BBL P1P.json" + }, + { + "name": "BETA PLA Silk+ @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Silk+ @BBL X1C.json" + }, + { + "name": "BETA PLA Transparent @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Transparent @BBL A1.json" + }, + { + "name": "BETA PLA Transparent @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Transparent @BBL A1M.json" + }, + { + "name": "BETA PLA Transparent @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Transparent @BBL H2D.json" + }, + { + "name": "BETA PLA Transparent @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Transparent @BBL P1P.json" + }, + { + "name": "BETA PLA Transparent @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Transparent @BBL X1C.json" + }, + { + "name": "BETA PLA UV Color Change @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA UV Color Change @BBL A1.json" + }, + { + "name": "BETA PLA UV Color Change @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA UV Color Change @BBL A1M.json" + }, + { + "name": "BETA PLA UV Color Change @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA UV Color Change @BBL H2D.json" + }, + { + "name": "BETA PLA UV Color Change @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA UV Color Change @BBL P1P.json" + }, + { + "name": "BETA PLA UV Color Change @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA UV Color Change @BBL X1C.json" + }, + { + "name": "BETA PLA Wood @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Wood @BBL A1.json" + }, + { + "name": "BETA PLA Wood @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Wood @BBL A1M.json" + }, + { + "name": "BETA PLA Wood @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Wood @BBL H2D.json" + }, + { + "name": "BETA PLA Wood @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Wood @BBL P1P.json" + }, + { + "name": "BETA PLA Wood @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Wood @BBL X1C.json" + }, + { + "name": "BETA PLA Youth @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA Youth @BBL A1.json" + }, + { + "name": "BETA PLA Youth @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA Youth @BBL A1M.json" + }, + { + "name": "BETA PLA Youth @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PLA Youth @BBL H2D.json" + }, + { + "name": "BETA PLA Youth @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA Youth @BBL P1P.json" + }, + { + "name": "BETA PLA Youth @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA Youth @BBL X1C.json" + }, + { + "name": "BETA PLA-CF @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PLA-CF @BBL A1.json" + }, + { + "name": "BETA PLA-CF @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PLA-CF @BBL A1M.json" + }, + { + "name": "BETA PLA-CF @BBL H2D 0.4 nozzle", + "sub_path": "filament/BETA/BBL/BETA PLA-CF @BBL H2D 0.4 nozzle.json" + }, + { + "name": "BETA PLA-CF @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PLA-CF @BBL P1P.json" + }, + { + "name": "BETA PLA-CF @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PLA-CF @BBL X1C.json" + }, { "name": "Bambu PLA Aero @System", "sub_path": "filament/Bambu/Bambu PLA Aero @System.json" @@ -1440,6 +2688,10 @@ "name": "Bambu PLA Impact @System", "sub_path": "filament/Bambu/Bambu PLA Impact @System.json" }, + { + "name": "Bambu PLA Lite @System", + "sub_path": "filament/Bambu/Bambu PLA Lite @System.json" + }, { "name": "Bambu PLA Marble @System", "sub_path": "filament/Bambu/Bambu PLA Marble @System.json" @@ -1452,6 +2704,10 @@ "name": "Bambu PLA Metal @System", "sub_path": "filament/Bambu/Bambu PLA Metal @System.json" }, + { + "name": "Bambu PLA Pure @System", + "sub_path": "filament/Bambu/Bambu PLA Pure @System.json" + }, { "name": "Bambu PLA Silk @System", "sub_path": "filament/Bambu/Bambu PLA Silk @System.json" @@ -1468,6 +2724,14 @@ "name": "Bambu PLA Tough @System", "sub_path": "filament/Bambu/Bambu PLA Tough @System.json" }, + { + "name": "Bambu PLA Tough+ @System", + "sub_path": "filament/Bambu/Bambu PLA Tough+ @System.json" + }, + { + "name": "Bambu PLA Translucent @System", + "sub_path": "filament/Bambu/Bambu PLA Translucent @System.json" + }, { "name": "Bambu PLA Wood @System", "sub_path": "filament/Bambu/Bambu PLA Wood @System.json" @@ -1488,10 +2752,74 @@ "name": "Bambu Support W @System", "sub_path": "filament/Bambu/Bambu Support W @System.json" }, + { + "name": "COEX PLA @BBL A1", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL A1.json" + }, + { + "name": "COEX PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "COEX PLA @BBL A1M", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL A1M.json" + }, + { + "name": "COEX PLA @BBL P1P", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL P1P.json" + }, + { + "name": "COEX PLA @BBL X1", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL X1.json" + }, + { + "name": "COEX PLA @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL X1C.json" + }, { "name": "COEX PLA @System", "sub_path": "filament/COEX/COEX PLA @System.json" }, + { + "name": "COEX PLA PRIME @BBL A1", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL A1.json" + }, + { + "name": "COEX PLA PRIME @BBL A1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL A1 0.2 nozzle.json" + }, + { + "name": "COEX PLA PRIME @BBL A1M", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL A1M.json" + }, + { + "name": "COEX PLA PRIME @BBL A1M 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL A1M 0.2 nozzle.json" + }, + { + "name": "COEX PLA PRIME @BBL P1P", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL P1P.json" + }, + { + "name": "COEX PLA PRIME @BBL P1P 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL P1P 0.2 nozzle.json" + }, + { + "name": "COEX PLA PRIME @BBL X1", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL X1.json" + }, + { + "name": "COEX PLA PRIME @BBL X1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL X1 0.2 nozzle.json" + }, + { + "name": "COEX PLA PRIME @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL X1C.json" + }, + { + "name": "COEX PLA PRIME @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA PRIME @BBL X1C 0.2 nozzle.json" + }, { "name": "COEX PLA PRIME @System", "sub_path": "filament/COEX/COEX PLA PRIME @System.json" @@ -1764,10 +3092,50 @@ "name": "FilAr PLA-mate Violeta", "sub_path": "filament/FilAr/FilAr PLA-mate Violeta.json" }, + { + "name": "addnorth PLA E-PLA", + "sub_path": "filament/addnorth/BBL/addnorth PLA E-PLA.json" + }, + { + "name": "addnorth PLA Economy", + "sub_path": "filament/addnorth/BBL/addnorth PLA Economy.json" + }, + { + "name": "addnorth PLA HT-PLA PRO Matte", + "sub_path": "filament/addnorth/BBL/addnorth PLA HT-PLA PRO Matte.json" + }, + { + "name": "addnorth PLA Textura", + "sub_path": "filament/addnorth/BBL/addnorth PLA Textura.json" + }, + { + "name": "addnorth PLA Wood", + "sub_path": "filament/addnorth/BBL/addnorth PLA Wood.json" + }, + { + "name": "addnorth PLA X-PLA", + "sub_path": "filament/addnorth/BBL/addnorth PLA X-PLA.json" + }, + { + "name": "addnorth PLA rPLA RE-ADD", + "sub_path": "filament/addnorth/BBL/addnorth PLA rPLA RE-ADD.json" + }, + { + "name": "addnorth PLA X-PLA High Speed", + "sub_path": "filament/addnorth/BBL/addnorth PLA X-PLA High Speed.json" + }, { "name": "Generic PLA Matte @System", "sub_path": "filament/Generic PLA Matte @System.json" }, + { + "name": "addnorth PLA Premium Silk", + "sub_path": "filament/addnorth/BBL/addnorth PLA Premium Silk.json" + }, + { + "name": "addnorth PLA-CF Carbon Fiber", + "sub_path": "filament/addnorth/BBL/addnorth PLA-CF Carbon Fiber.json" + }, { "name": "INSLOGIC PLA Pro @BBL P2S", "sub_path": "filament/INSLOGIC/BBL/INSLOGIC PLA Pro @BBL P2S.json" @@ -1816,14 +3184,98 @@ "name": "NIT PLA @System", "sub_path": "filament/NIT/NIT PLA @System.json" }, + { + "name": "Numakers PLA+ @BBL base", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL base.json" + }, { "name": "Numakers PLA+ @System", "sub_path": "filament/Numakers/Numakers PLA+ @System.json" }, + { + "name": "Overture Air PLA @BBL A1", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL A1.json" + }, + { + "name": "Overture Air PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture Air PLA @BBL A1M", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL A1M.json" + }, + { + "name": "Overture Air PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture Air PLA @BBL P1P", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL P1P.json" + }, + { + "name": "Overture Air PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture Air PLA @BBL X1", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL X1.json" + }, + { + "name": "Overture Air PLA @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture Air PLA @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL X1C.json" + }, + { + "name": "Overture Air PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Air PLA @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture Air PLA @System", "sub_path": "filament/Overture/Overture Air PLA @System.json" }, + { + "name": "Overture Easy PLA @BBL A1", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL A1.json" + }, + { + "name": "Overture Easy PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture Easy PLA @BBL A1M", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL A1M.json" + }, + { + "name": "Overture Easy PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture Easy PLA @BBL P1P", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL P1P.json" + }, + { + "name": "Overture Easy PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture Easy PLA @BBL X1", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL X1.json" + }, + { + "name": "Overture Easy PLA @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture Easy PLA @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL X1C.json" + }, + { + "name": "Overture Easy PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Easy PLA @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture Easy PLA @System", "sub_path": "filament/Overture/Overture Easy PLA @System.json" @@ -1836,82 +3288,270 @@ "name": "Overture PLA @System", "sub_path": "filament/Overture/Overture PLA @System.json" }, + { + "name": "Overture PLA Pro @BBL base", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL base.json" + }, { "name": "Overture PLA Pro @System", "sub_path": "filament/Overture/Overture PLA Pro @System.json" }, + { + "name": "Overture Rock PLA @BBL A1", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL A1.json" + }, + { + "name": "Overture Rock PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture Rock PLA @BBL A1M", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL A1M.json" + }, + { + "name": "Overture Rock PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture Rock PLA @BBL P1P", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL P1P.json" + }, + { + "name": "Overture Rock PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture Rock PLA @BBL X1", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL X1.json" + }, + { + "name": "Overture Rock PLA @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture Rock PLA @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL X1C.json" + }, + { + "name": "Overture Rock PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Rock PLA @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture Rock PLA @System", "sub_path": "filament/Overture/Overture Rock PLA @System.json" }, + { + "name": "Overture Silk PLA @BBL A1", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL A1.json" + }, + { + "name": "Overture Silk PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture Silk PLA @BBL A1M", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL A1M.json" + }, + { + "name": "Overture Silk PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture Silk PLA @BBL P1P", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL P1P.json" + }, + { + "name": "Overture Silk PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture Silk PLA @BBL X1", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL X1.json" + }, + { + "name": "Overture Silk PLA @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture Silk PLA @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL X1C.json" + }, + { + "name": "Overture Silk PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Silk PLA @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture Silk PLA @System", "sub_path": "filament/Overture/Overture Silk PLA @System.json" }, + { + "name": "Overture Super PLA+ @BBL A1", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL A1.json" + }, + { + "name": "Overture Super PLA+ @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture Super PLA+ @BBL A1M", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL A1M.json" + }, + { + "name": "Overture Super PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture Super PLA+ @BBL P1P", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL P1P.json" + }, + { + "name": "Overture Super PLA+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture Super PLA+ @BBL X1", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL X1.json" + }, + { + "name": "Overture Super PLA+ @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture Super PLA+ @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL X1C.json" + }, + { + "name": "Overture Super PLA+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture Super PLA+ @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture Super PLA+ @System", "sub_path": "filament/Overture/Overture Super PLA+ @System.json" }, + { + "name": "Panchroma CoPE @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL base.json" + }, { "name": "Panchroma CoPE @System", "sub_path": "filament/Polymaker/Panchroma CoPE @System.json" }, + { + "name": "Panchroma PLA @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL base.json" + }, { "name": "Panchroma PLA @System", "sub_path": "filament/Polymaker/Panchroma PLA @System.json" }, + { + "name": "Panchroma PLA Celestial @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL base.json" + }, { "name": "Panchroma PLA Celestial @System", "sub_path": "filament/Polymaker/Panchroma PLA Celestial @System.json" }, + { + "name": "Panchroma PLA Galaxy @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL base.json" + }, { "name": "Panchroma PLA Galaxy @System", "sub_path": "filament/Polymaker/Panchroma PLA Galaxy @System.json" }, + { + "name": "Panchroma PLA Glow @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL base.json" + }, { "name": "Panchroma PLA Glow @System", "sub_path": "filament/Polymaker/Panchroma PLA Glow @System.json" }, + { + "name": "Panchroma PLA Luminous @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL base.json" + }, { "name": "Panchroma PLA Luminous @System", "sub_path": "filament/Polymaker/Panchroma PLA Luminous @System.json" }, + { + "name": "Panchroma PLA Marble @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL base.json" + }, { "name": "Panchroma PLA Marble @System", "sub_path": "filament/Polymaker/Panchroma PLA Marble @System.json" }, + { + "name": "Panchroma PLA Matte @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL base.json" + }, { "name": "Panchroma PLA Matte @System", "sub_path": "filament/Polymaker/Panchroma PLA Matte @System.json" }, + { + "name": "Panchroma PLA Metallic @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL base.json" + }, { "name": "Panchroma PLA Metallic @System", "sub_path": "filament/Polymaker/Panchroma PLA Metallic @System.json" }, + { + "name": "Panchroma PLA Neon @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL base.json" + }, { "name": "Panchroma PLA Neon @System", "sub_path": "filament/Polymaker/Panchroma PLA Neon @System.json" }, + { + "name": "Panchroma PLA Satin @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL base.json" + }, { "name": "Panchroma PLA Satin @System", "sub_path": "filament/Polymaker/Panchroma PLA Satin @System.json" }, + { + "name": "Panchroma PLA Silk @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL base.json" + }, { "name": "Panchroma PLA Silk @System", "sub_path": "filament/Polymaker/Panchroma PLA Silk @System.json" }, + { + "name": "Panchroma PLA Starlight @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL base.json" + }, { "name": "Panchroma PLA Starlight @System", "sub_path": "filament/Polymaker/Panchroma PLA Starlight @System.json" }, + { + "name": "Panchroma PLA Temp Shift @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL base.json" + }, { "name": "Panchroma PLA Temp Shift @System", "sub_path": "filament/Polymaker/Panchroma PLA Temp Shift @System.json" }, + { + "name": "Panchroma PLA Translucent @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL base.json" + }, { "name": "Panchroma PLA Translucent @System", "sub_path": "filament/Polymaker/Panchroma PLA Translucent @System.json" }, + { + "name": "Panchroma PLA UV Shift @BBL base", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL base.json" + }, { "name": "Panchroma PLA UV Shift @System", "sub_path": "filament/Polymaker/Panchroma PLA UV Shift @System.json" @@ -1920,6 +3560,22 @@ "name": "PlastAR PLA @System", "sub_path": "filament/Printalot/PlastAR PLA @System.json" }, + { + "name": "PolyLite CosPLA @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite CosPLA @BBL A1.json" + }, + { + "name": "PolyLite CosPLA @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite CosPLA @BBL A1M.json" + }, + { + "name": "PolyLite CosPLA @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite CosPLA @BBL P1P.json" + }, + { + "name": "PolyLite CosPLA @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite CosPLA @BBL X1.json" + }, { "name": "PolyLite Dual PLA @base", "sub_path": "filament/Polymaker/PolyLite Dual PLA @base.json" @@ -1928,10 +3584,110 @@ "name": "PolyLite PLA @System", "sub_path": "filament/Polymaker/PolyLite PLA @System.json" }, + { + "name": "PolyLite PLA Galaxy @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1.json" + }, + { + "name": "PolyLite PLA Galaxy @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1M.json" + }, + { + "name": "PolyLite PLA Galaxy @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL P1P.json" + }, + { + "name": "PolyLite PLA Galaxy @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL X1.json" + }, + { + "name": "PolyLite PLA Glow @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1.json" + }, + { + "name": "PolyLite PLA Glow @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1M.json" + }, + { + "name": "PolyLite PLA Glow @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Glow @BBL P1P.json" + }, + { + "name": "PolyLite PLA Glow @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Glow @BBL X1.json" + }, + { + "name": "PolyLite PLA Luminous @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1.json" + }, + { + "name": "PolyLite PLA Luminous @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1M.json" + }, + { + "name": "PolyLite PLA Luminous @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Luminous @BBL P1P.json" + }, + { + "name": "PolyLite PLA Luminous @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Luminous @BBL X1.json" + }, + { + "name": "PolyLite PLA Neon @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1.json" + }, + { + "name": "PolyLite PLA Neon @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1M.json" + }, + { + "name": "PolyLite PLA Neon @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Neon @BBL P1P.json" + }, + { + "name": "PolyLite PLA Neon @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Neon @BBL X1.json" + }, + { + "name": "PolyLite PLA Pro @BBL base", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL base.json" + }, { "name": "PolyLite PLA Pro @System", "sub_path": "filament/Polymaker/PolyLite PLA Pro @System.json" }, + { + "name": "PolyLite PLA Starlight @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1.json" + }, + { + "name": "PolyLite PLA Starlight @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1M.json" + }, + { + "name": "PolyLite PLA Starlight @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Starlight @BBL P1P.json" + }, + { + "name": "PolyLite PLA Starlight @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Starlight @BBL X1.json" + }, + { + "name": "PolyLite PLA Translucent @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1.json" + }, + { + "name": "PolyLite PLA Translucent @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1M.json" + }, + { + "name": "PolyLite PLA Translucent @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Translucent @BBL P1P.json" + }, + { + "name": "PolyLite PLA Translucent @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Translucent @BBL X1.json" + }, { "name": "PolyTerra Dual PLA @System", "sub_path": "filament/Polymaker/PolyTerra Dual PLA @System.json" @@ -1940,10 +3696,50 @@ "name": "PolyTerra PLA @System", "sub_path": "filament/Polymaker/PolyTerra PLA @System.json" }, + { + "name": "PolyTerra PLA Marble @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1.json" + }, + { + "name": "PolyTerra PLA Marble @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1M.json" + }, + { + "name": "PolyTerra PLA Marble @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA Marble @BBL P1P.json" + }, + { + "name": "PolyTerra PLA Marble @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA Marble @BBL X1.json" + }, + { + "name": "PolyTerra PLA+ @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1.json" + }, + { + "name": "PolyTerra PLA+ @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1M.json" + }, + { + "name": "PolyTerra PLA+ @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA+ @BBL P1P.json" + }, + { + "name": "PolyTerra PLA+ @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyTerra PLA+ @BBL X1.json" + }, + { + "name": "Polymaker HT-PLA @BBL base", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL base.json" + }, { "name": "Polymaker HT-PLA @System", "sub_path": "filament/Polymaker/Polymaker HT-PLA @System.json" }, + { + "name": "Polymaker HT-PLA-GF @BBL base", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL base.json" + }, { "name": "Polymaker HT-PLA-GF @System", "sub_path": "filament/Polymaker/Polymaker HT-PLA-GF @System.json" @@ -2048,6 +3844,114 @@ "name": "FDplast SBS @System", "sub_path": "filament/FDplast/FDplast SBS @System.json" }, + { + "name": "BETA PEBA 90A @BBL A1", + "sub_path": "filament/BETA/BBL/BETA PEBA 90A @BBL A1.json" + }, + { + "name": "BETA PEBA 90A @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA PEBA 90A @BBL A1M.json" + }, + { + "name": "BETA PEBA 90A @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA PEBA 90A @BBL H2D.json" + }, + { + "name": "BETA PEBA 90A @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA PEBA 90A @BBL P1P.json" + }, + { + "name": "BETA PEBA 90A @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA PEBA 90A @BBL X1C.json" + }, + { + "name": "BETA TPU 90A @BBL A1", + "sub_path": "filament/BETA/BBL/BETA TPU 90A @BBL A1.json" + }, + { + "name": "BETA TPU 90A @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA TPU 90A @BBL A1M.json" + }, + { + "name": "BETA TPU 90A @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA TPU 90A @BBL H2D.json" + }, + { + "name": "BETA TPU 90A @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA TPU 90A @BBL P1P.json" + }, + { + "name": "BETA TPU 90A @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA TPU 90A @BBL X1C.json" + }, + { + "name": "BETA TPU 95A @BBL A1", + "sub_path": "filament/BETA/BBL/BETA TPU 95A @BBL A1.json" + }, + { + "name": "BETA TPU 95A @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA TPU 95A @BBL A1M.json" + }, + { + "name": "BETA TPU 95A @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA TPU 95A @BBL H2D.json" + }, + { + "name": "BETA TPU 95A @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA TPU 95A @BBL P1P.json" + }, + { + "name": "BETA TPU 95A @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA TPU 95A @BBL X1C.json" + }, + { + "name": "BETA TPU 98A @BBL A1", + "sub_path": "filament/BETA/BBL/BETA TPU 98A @BBL A1.json" + }, + { + "name": "BETA TPU 98A @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA TPU 98A @BBL A1M.json" + }, + { + "name": "BETA TPU 98A @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA TPU 98A @BBL H2D.json" + }, + { + "name": "BETA TPU 98A @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA TPU 98A @BBL P1P.json" + }, + { + "name": "BETA TPU 98A @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA TPU 98A @BBL X1C.json" + }, + { + "name": "BETA TPU Matte @BBL A1", + "sub_path": "filament/BETA/BBL/BETA TPU Matte @BBL A1.json" + }, + { + "name": "BETA TPU Matte @BBL A1M", + "sub_path": "filament/BETA/BBL/BETA TPU Matte @BBL A1M.json" + }, + { + "name": "BETA TPU Matte @BBL H2D", + "sub_path": "filament/BETA/BBL/BETA TPU Matte @BBL H2D.json" + }, + { + "name": "BETA TPU Matte @BBL P1P", + "sub_path": "filament/BETA/BBL/BETA TPU Matte @BBL P1P.json" + }, + { + "name": "BETA TPU Matte @BBL X1C", + "sub_path": "filament/BETA/BBL/BETA TPU Matte @BBL X1C.json" + }, + { + "name": "Bambu TPU 85A @System", + "sub_path": "filament/Bambu/Bambu TPU 85A @System.json" + }, + { + "name": "Bambu TPU 90A @System", + "sub_path": "filament/Bambu/Bambu TPU 90A @System.json" + }, { "name": "Bambu TPU 95A @System", "sub_path": "filament/Bambu/Bambu TPU 95A @System.json" @@ -2056,18 +3960,126 @@ "name": "Bambu TPU 95A HF @System", "sub_path": "filament/Bambu/Bambu TPU 95A HF @System.json" }, + { + "name": "Bambu TPU for AMS @System", + "sub_path": "filament/Bambu/Bambu TPU for AMS @System.json" + }, + { + "name": "COEX TPE 30D @BBL A1", + "sub_path": "filament/COEX/BBL/COEX TPE 30D @BBL A1.json" + }, + { + "name": "COEX TPE 30D @BBL A1M", + "sub_path": "filament/COEX/BBL/COEX TPE 30D @BBL A1M.json" + }, + { + "name": "COEX TPE 30D @BBL P1P", + "sub_path": "filament/COEX/BBL/COEX TPE 30D @BBL P1P.json" + }, + { + "name": "COEX TPE 30D @BBL X1", + "sub_path": "filament/COEX/BBL/COEX TPE 30D @BBL X1.json" + }, + { + "name": "COEX TPE 30D @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX TPE 30D @BBL X1C.json" + }, { "name": "COEX TPE 30D @System", "sub_path": "filament/COEX/COEX TPE 30D @System.json" }, + { + "name": "COEX TPE 40D @BBL A1", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL A1.json" + }, + { + "name": "COEX TPE 40D @BBL A1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL A1 0.2 nozzle.json" + }, + { + "name": "COEX TPE 40D @BBL A1M", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL A1M.json" + }, + { + "name": "COEX TPE 40D @BBL A1M 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL A1M 0.2 nozzle.json" + }, + { + "name": "COEX TPE 40D @BBL P1P", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL P1P.json" + }, + { + "name": "COEX TPE 40D @BBL P1P 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL P1P 0.2 nozzle.json" + }, + { + "name": "COEX TPE 40D @BBL X1", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL X1.json" + }, + { + "name": "COEX TPE 40D @BBL X1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL X1 0.2 nozzle.json" + }, + { + "name": "COEX TPE 40D @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL X1C.json" + }, + { + "name": "COEX TPE 40D @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 40D @BBL X1C 0.2 nozzle.json" + }, { "name": "COEX TPE 40D @System", "sub_path": "filament/COEX/COEX TPE 40D @System.json" }, + { + "name": "COEX TPE 60D @BBL A1", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL A1.json" + }, + { + "name": "COEX TPE 60D @BBL A1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL A1 0.2 nozzle.json" + }, + { + "name": "COEX TPE 60D @BBL A1M", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL A1M.json" + }, + { + "name": "COEX TPE 60D @BBL A1M 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL A1M 0.2 nozzle.json" + }, + { + "name": "COEX TPE 60D @BBL P1P", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL P1P.json" + }, + { + "name": "COEX TPE 60D @BBL P1P 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL P1P 0.2 nozzle.json" + }, + { + "name": "COEX TPE 60D @BBL X1", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL X1.json" + }, + { + "name": "COEX TPE 60D @BBL X1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL X1 0.2 nozzle.json" + }, + { + "name": "COEX TPE 60D @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL X1C.json" + }, + { + "name": "COEX TPE 60D @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX TPE 60D @BBL X1C 0.2 nozzle.json" + }, { "name": "COEX TPE 60D @System", "sub_path": "filament/COEX/COEX TPE 60D @System.json" }, + { + "name": "COEX TPU 60A @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX TPU 60A @BBL X1C.json" + }, { "name": "COEX TPU 60A @System", "sub_path": "filament/COEX/COEX TPU 60A @System.json" @@ -2088,6 +4100,58 @@ "name": "FDplast TPU @System", "sub_path": "filament/FDplast/FDplast TPU @System.json" }, + { + "name": "addnorth TPU EasyFlex", + "sub_path": "filament/addnorth/BBL/addnorth TPU EasyFlex.json" + }, + { + "name": "addnorth TPU Pro Matte 85A", + "sub_path": "filament/addnorth/BBL/addnorth TPU Pro Matte 85A.json" + }, + { + "name": "addnorth TPU Pro Matte 95A", + "sub_path": "filament/addnorth/BBL/addnorth TPU Pro Matte 95A.json" + }, + { + "name": "Overture TPU @BBL A1", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL A1.json" + }, + { + "name": "Overture TPU @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture TPU @BBL A1M", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL A1M.json" + }, + { + "name": "Overture TPU @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture TPU @BBL P1P", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL P1P.json" + }, + { + "name": "Overture TPU @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture TPU @BBL X1", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL X1.json" + }, + { + "name": "Overture TPU @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture TPU @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL X1C.json" + }, + { + "name": "Overture TPU @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture TPU @BBL X1C 0.2 nozzle.json" + }, { "name": "Overture TPU @System", "sub_path": "filament/Overture/Overture TPU @System.json" @@ -2100,14 +4164,46 @@ "name": "Elegoo PC-FR @System", "sub_path": "filament/Elegoo/Elegoo PC-FR @System.json" }, + { + "name": "COEX PCTG PRIME @BBL A1M 0.4 nozzle", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL A1M.json" + }, + { + "name": "COEX PCTG PRIME @BBL A1M 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json" + }, + { + "name": "COEX PCTG PRIME @BBL A1M 0.8 nozzle", + "sub_path": "filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json" + }, + { + "name": "AliZ PETG-CF @P1-X1", + "sub_path": "filament/AliZ/BBL/AliZ PETG-CF @P1-X1.json" + }, { "name": "AliZ PETG-CF @System", "sub_path": "filament/AliZ/AliZ PETG-CF @System.json" }, + { + "name": "AliZ PETG-Metal @P1-X1", + "sub_path": "filament/AliZ/BBL/AliZ PETG-Metal @P1-X1.json" + }, { "name": "AliZ PETG-Metal @System", "sub_path": "filament/AliZ/AliZ PETG-Metal @System.json" }, + { + "name": "COEX PETG @BBL A1M 0.4 nozzle", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL A1M.json" + }, + { + "name": "COEX PETG @BBL A1M 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL A1M 0.2 nozzle.json" + }, + { + "name": "COEX PETG @BBL A1M 0.8 nozzle", + "sub_path": "filament/COEX/BBL/COEX PETG @BBL A1M 0.8 nozzle.json" + }, { "name": "Elegoo PET-CF @System", "sub_path": "filament/Elegoo/Elegoo PET-CF @System.json" @@ -2136,6 +4232,26 @@ "name": "Elegoo Rapid PETG @System", "sub_path": "filament/Elegoo/Elegoo Rapid PETG @System.json" }, + { + "name": "Fiberon PETG-ESD @BBL X1", + "sub_path": "filament/Polymaker/BBL/Fiberon PETG-ESD @BBL X1.json" + }, + { + "name": "addnorth PETG-CF Rigid X", + "sub_path": "filament/addnorth/BBL/addnorth PETG-CF Rigid X.json" + }, + { + "name": "COEX PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "COEX PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "COEX PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA @BBL X1C 0.2 nozzle.json" + }, { "name": "Elegoo PLA Basic @System", "sub_path": "filament/Elegoo/Elegoo PLA Basic @System.json" @@ -2188,10 +4304,886 @@ "name": "Elegoo Rapid PLA+ @System", "sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @System.json" }, + { + "name": "Numakers PLA+ @BBL A1", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL A1.json" + }, + { + "name": "Numakers PLA+ @BBL A1 0.2 nozzle", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL A1 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL A1M", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL A1M.json" + }, + { + "name": "Numakers PLA+ @BBL A1M 0.2 nozzle", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL P1P", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL P1P.json" + }, + { + "name": "Numakers PLA+ @BBL P1P 0.2 nozzle", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Numakers PLA+ @BBL X1", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL X1.json" + }, + { + "name": "Numakers PLA+ @BBL X1C", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL X1C.json" + }, + { + "name": "Numakers PLA+ @BBL X1C 0.2 nozzle", + "sub_path": "filament/Numakers/BBL/Numakers PLA+ @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Overture PLA Pro @BBL A1", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL A1.json" + }, + { + "name": "Overture PLA Pro @BBL A1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL A1 0.2 nozzle.json" + }, + { + "name": "Overture PLA Pro @BBL A1M", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL A1M.json" + }, + { + "name": "Overture PLA Pro @BBL A1M 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Overture PLA Pro @BBL P1P", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL P1P.json" + }, + { + "name": "Overture PLA Pro @BBL P1P 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Overture PLA Pro @BBL X1", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL X1.json" + }, + { + "name": "Overture PLA Pro @BBL X1 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL X1 0.2 nozzle.json" + }, + { + "name": "Overture PLA Pro @BBL X1C", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL X1C.json" + }, + { + "name": "Overture PLA Pro @BBL X1C 0.2 nozzle", + "sub_path": "filament/Overture/BBL/Overture PLA Pro @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma CoPE @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL A1.json" + }, + { + "name": "Panchroma CoPE @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma CoPE @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL A1M.json" + }, + { + "name": "Panchroma CoPE @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma CoPE @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL P1P.json" + }, + { + "name": "Panchroma CoPE @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma CoPE @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL X1.json" + }, + { + "name": "Panchroma CoPE @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma CoPE @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL X1C.json" + }, + { + "name": "Panchroma CoPE @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma CoPE @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL A1.json" + }, + { + "name": "Panchroma PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL A1M.json" + }, + { + "name": "Panchroma PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL P1P.json" + }, + { + "name": "Panchroma PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL X1.json" + }, + { + "name": "Panchroma PLA @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL X1C.json" + }, + { + "name": "Panchroma PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Celestial @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1.json" + }, + { + "name": "Panchroma PLA Celestial @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Celestial @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M.json" + }, + { + "name": "Panchroma PLA Celestial @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Celestial @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P.json" + }, + { + "name": "Panchroma PLA Celestial @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Celestial @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1.json" + }, + { + "name": "Panchroma PLA Celestial @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Celestial @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C.json" + }, + { + "name": "Panchroma PLA Celestial @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C.json" + }, + { + "name": "Panchroma PLA Galaxy @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Glow @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1.json" + }, + { + "name": "Panchroma PLA Glow @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Glow @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M.json" + }, + { + "name": "Panchroma PLA Glow @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Glow @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P.json" + }, + { + "name": "Panchroma PLA Glow @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Glow @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1.json" + }, + { + "name": "Panchroma PLA Glow @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Glow @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C.json" + }, + { + "name": "Panchroma PLA Glow @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Luminous @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1.json" + }, + { + "name": "Panchroma PLA Luminous @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Luminous @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M.json" + }, + { + "name": "Panchroma PLA Luminous @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Luminous @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P.json" + }, + { + "name": "Panchroma PLA Luminous @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Luminous @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1.json" + }, + { + "name": "Panchroma PLA Luminous @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Luminous @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C.json" + }, + { + "name": "Panchroma PLA Luminous @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Marble @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1.json" + }, + { + "name": "Panchroma PLA Marble @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Marble @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M.json" + }, + { + "name": "Panchroma PLA Marble @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Marble @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P.json" + }, + { + "name": "Panchroma PLA Marble @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Marble @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1.json" + }, + { + "name": "Panchroma PLA Marble @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Marble @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C.json" + }, + { + "name": "Panchroma PLA Marble @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Matte @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1.json" + }, + { + "name": "Panchroma PLA Matte @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Matte @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M.json" + }, + { + "name": "Panchroma PLA Matte @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Matte @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P.json" + }, + { + "name": "Panchroma PLA Matte @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Matte @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1.json" + }, + { + "name": "Panchroma PLA Matte @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Matte @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C.json" + }, + { + "name": "Panchroma PLA Matte @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Metallic @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1.json" + }, + { + "name": "Panchroma PLA Metallic @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Metallic @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M.json" + }, + { + "name": "Panchroma PLA Metallic @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Metallic @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P.json" + }, + { + "name": "Panchroma PLA Metallic @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Metallic @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1.json" + }, + { + "name": "Panchroma PLA Metallic @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Metallic @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C.json" + }, + { + "name": "Panchroma PLA Metallic @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Neon @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1.json" + }, + { + "name": "Panchroma PLA Neon @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Neon @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M.json" + }, + { + "name": "Panchroma PLA Neon @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Neon @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P.json" + }, + { + "name": "Panchroma PLA Neon @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Neon @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1.json" + }, + { + "name": "Panchroma PLA Neon @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Neon @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C.json" + }, + { + "name": "Panchroma PLA Neon @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1.json" + }, + { + "name": "Panchroma PLA Satin @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M.json" + }, + { + "name": "Panchroma PLA Satin @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P.json" + }, + { + "name": "Panchroma PLA Satin @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C.json" + }, + { + "name": "Panchroma PLA Satin @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Silk @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1.json" + }, + { + "name": "Panchroma PLA Silk @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Silk @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M.json" + }, + { + "name": "Panchroma PLA Silk @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Silk @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P.json" + }, + { + "name": "Panchroma PLA Silk @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Silk @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1.json" + }, + { + "name": "Panchroma PLA Silk @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Silk @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C.json" + }, + { + "name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Starlight @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1.json" + }, + { + "name": "Panchroma PLA Starlight @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Starlight @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M.json" + }, + { + "name": "Panchroma PLA Starlight @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Starlight @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P.json" + }, + { + "name": "Panchroma PLA Starlight @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Starlight @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1.json" + }, + { + "name": "Panchroma PLA Starlight @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Starlight @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C.json" + }, + { + "name": "Panchroma PLA Starlight @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C.json" + }, + { + "name": "Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Translucent @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1.json" + }, + { + "name": "Panchroma PLA Translucent @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Translucent @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M.json" + }, + { + "name": "Panchroma PLA Translucent @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Translucent @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P.json" + }, + { + "name": "Panchroma PLA Translucent @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Translucent @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1.json" + }, + { + "name": "Panchroma PLA Translucent @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA Translucent @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C.json" + }, + { + "name": "Panchroma PLA Translucent @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL A1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL X1", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C.json" + }, + { + "name": "Panchroma PLA UV Shift @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json" + }, { "name": "PolyLite Dual PLA @System", "sub_path": "filament/Polymaker/PolyLite Dual PLA @System.json" }, + { + "name": "PolyLite PLA Pro @BBL A1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1.json" + }, + { + "name": "PolyLite PLA Pro @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA Pro @BBL A1M", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M.json" + }, + { + "name": "PolyLite PLA Pro @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA Pro @BBL P1P", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P.json" + }, + { + "name": "PolyLite PLA Pro @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA Pro @BBL X1", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1.json" + }, + { + "name": "PolyLite PLA Pro @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1 0.2 nozzle.json" + }, + { + "name": "PolyLite PLA Pro @BBL X1C", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C.json" + }, + { + "name": "PolyLite PLA Pro @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA @BBL A1", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1.json" + }, + { + "name": "Polymaker HT-PLA @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M.json" + }, + { + "name": "Polymaker HT-PLA @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P.json" + }, + { + "name": "Polymaker HT-PLA @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA @BBL X1", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1.json" + }, + { + "name": "Polymaker HT-PLA @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C.json" + }, + { + "name": "Polymaker HT-PLA @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL A1", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL A1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL A1M", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL P1P", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL X1", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL X1 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL X1C", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C.json" + }, + { + "name": "Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle", + "sub_path": "filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json" + }, + { + "name": "COEX PLA+Silk @BBL A1", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL A1.json" + }, + { + "name": "COEX PLA+Silk @BBL A1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL A1 0.2 nozzle.json" + }, + { + "name": "COEX PLA+Silk @BBL A1M", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL A1M.json" + }, + { + "name": "COEX PLA+Silk @BBL A1M 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL A1M 0.2 nozzle.json" + }, + { + "name": "COEX PLA+Silk @BBL P1P", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL P1P.json" + }, + { + "name": "COEX PLA+Silk @BBL P1P 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL P1P 0.2 nozzle.json" + }, + { + "name": "COEX PLA+Silk @BBL X1", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL X1.json" + }, + { + "name": "COEX PLA+Silk @BBL X1 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL X1 0.2 nozzle.json" + }, + { + "name": "COEX PLA+Silk @BBL X1C", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL X1C.json" + }, + { + "name": "COEX PLA+Silk @BBL X1C 0.2 nozzle", + "sub_path": "filament/COEX/BBL/COEX PLA+Silk @BBL X1C 0.2 nozzle.json" + }, { "name": "COEX PLA+Silk @System", "sub_path": "filament/COEX/COEX PLA+Silk @System.json" diff --git a/resources/profiles/BBL/filament/AliZ/AliZ PA-CF @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PA-CF @P1-X1.json similarity index 91% rename from resources/profiles/BBL/filament/AliZ/AliZ PA-CF @P1-X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PA-CF @P1-X1.json index c94baa16f8..bc75a0717f 100644 --- a/resources/profiles/BBL/filament/AliZ/AliZ PA-CF @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PA-CF @P1-X1.json @@ -3,7 +3,7 @@ "name": "AliZ PA-CF @P1-X1", "inherits": "AliZ PA-CF @base", "from": "system", - "setting_id": "AliZ003_00", + "setting_id": "cN0uesF0mZf3KSkj", "instantiation": "true", "enable_pressure_advance": [ "1" diff --git a/resources/profiles/BBL/filament/AliZ/AliZ PETG @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG @P1-X1.json similarity index 91% rename from resources/profiles/BBL/filament/AliZ/AliZ PETG @P1-X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG @P1-X1.json index 9549920f5a..9976c2e168 100644 --- a/resources/profiles/BBL/filament/AliZ/AliZ PETG @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG @P1-X1.json @@ -3,7 +3,7 @@ "name": "AliZ PETG @P1-X1", "inherits": "AliZ PETG @base", "from": "system", - "setting_id": "AliZ001_00", + "setting_id": "cZp23cC4ong9q6dn", "instantiation": "true", "enable_pressure_advance": [ "1" diff --git a/resources/profiles/BBL/filament/AliZ/AliZ PETG-CF @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG-CF @P1-X1.json similarity index 91% rename from resources/profiles/BBL/filament/AliZ/AliZ PETG-CF @P1-X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG-CF @P1-X1.json index be611e7ee7..f7af938dfa 100644 --- a/resources/profiles/BBL/filament/AliZ/AliZ PETG-CF @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG-CF @P1-X1.json @@ -3,7 +3,7 @@ "name": "AliZ PETG-CF @P1-X1", "inherits": "AliZ PETG-CF @base", "from": "system", - "setting_id": "AZ01-1_00", + "setting_id": "HWW5mejsB0SfEfWw", "instantiation": "true", "enable_pressure_advance": [ "1" diff --git a/resources/profiles/BBL/filament/AliZ/AliZ PETG-Metal @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG-Metal @P1-X1.json similarity index 92% rename from resources/profiles/BBL/filament/AliZ/AliZ PETG-Metal @P1-X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG-Metal @P1-X1.json index b25bfa6521..e985f6123b 100644 --- a/resources/profiles/BBL/filament/AliZ/AliZ PETG-Metal @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PETG-Metal @P1-X1.json @@ -3,7 +3,7 @@ "name": "AliZ PETG-Metal @P1-X1", "inherits": "AliZ PETG-Metal @base", "from": "system", - "setting_id": "AZ01-2_00", + "setting_id": "JqD0blE4fxaNfXqB", "instantiation": "true", "enable_pressure_advance": [ "1" diff --git a/resources/profiles/BBL/filament/AliZ/AliZ PLA @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PLA @P1-X1.json similarity index 91% rename from resources/profiles/BBL/filament/AliZ/AliZ PLA @P1-X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PLA @P1-X1.json index c60138f745..a49d64e421 100644 --- a/resources/profiles/BBL/filament/AliZ/AliZ PLA @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/AliZ/BBL/AliZ PLA @P1-X1.json @@ -3,7 +3,7 @@ "name": "AliZ PLA @P1-X1", "inherits": "AliZ PLA @base", "from": "system", - "setting_id": "AliZ002_00", + "setting_id": "fRELapY8YiP4qrBW", "instantiation": "true", "enable_pressure_advance": [ "1" diff --git a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA ABS @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL A1.json index 97348b871d..efe7ba4bd6 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA ABS @BBL A1", "inherits": "BETA ABS @base", "from": "system", - "setting_id": "BABB00_07", + "setting_id": "dUGRrmxU89pRaJ2Z", "instantiation": "true", "fan_max_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA ABS @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL H2D.json index d4c4fda0ba..b02dd7539c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA ABS @BBL H2D", "inherits": "BETA ABS @base", "from": "system", - "setting_id": "BABB00_11", + "setting_id": "oxZKTEMd8TpyoH39", "instantiation": "true", "chamber_temperatures": [ "65" diff --git a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA ABS @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL P1P.json index c9c9bbfe4b..8210765185 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA ABS @BBL P1P", "inherits": "BETA ABS @base", "from": "system", - "setting_id": "BABB00_03", + "setting_id": "MPYyfCKMsJZy8GaY", "instantiation": "true", "fan_max_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA ABS @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL X1C.json index b6682d512a..196053eb0a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ABS @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ABS @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA ABS @BBL X1C", "inherits": "BETA ABS @base", "from": "system", - "setting_id": "BABB00", + "setting_id": "vMA7EhgNDT4MwMRr", "instantiation": "true", "fan_max_speed": [ "60" diff --git a/resources/profiles/BBL/filament/BETA/BETA ASA @BBL A1 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL A1 0.4 nozzle.json similarity index 90% rename from resources/profiles/BBL/filament/BETA/BETA ASA @BBL A1 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL A1 0.4 nozzle.json index 3aaff7f087..670fa696fb 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ASA @BBL A1 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL A1 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA ASA @BBL A1 0.4 nozzle", "inherits": "BETA ASA @base", "from": "system", - "setting_id": "BASB00_09", + "setting_id": "LevRG7t9mTlEseaB", "instantiation": "true", "chamber_temperatures": [ "60" diff --git a/resources/profiles/BBL/filament/BETA/BETA ASA @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA ASA @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL H2D 0.4 nozzle.json index 66569a778a..3f27231fd0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ASA @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA ASA @BBL H2D 0.4 nozzle", "inherits": "BETA ASA @base", "from": "system", - "setting_id": "BASB00_13", + "setting_id": "3NBkWTXmqi8eRUhi", "instantiation": "true", "chamber_temperatures": [ "65" diff --git a/resources/profiles/BBL/filament/BETA/BETA ASA @BBL X1C 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL X1C 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA ASA @BBL X1C 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL X1C 0.4 nozzle.json index 3420b95e62..3d65ee4436 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ASA @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA ASA @BBL X1C 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA ASA @BBL X1C 0.4 nozzle", "inherits": "BETA ASA @base", "from": "system", - "setting_id": "BASB00_02", + "setting_id": "0nWTEZkH7NKXgCib", "instantiation": "true", "chamber_temperatures": [ "60" diff --git a/resources/profiles/BBL/filament/BETA/BETA HIPS @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA HIPS @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA HIPS @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA HIPS @BBL H2D.json index 7975343472..7bb555ede0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA HIPS @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA HIPS @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA HIPS @BBL H2D", "inherits": "BETA HIPS @base", "from": "system", - "setting_id": "BHIB00_06", + "setting_id": "9nN2uWxlYH1c507A", "instantiation": "true", "filament_deretraction_speed": [ "nil", diff --git a/resources/profiles/BBL/filament/BETA/BETA HIPS @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA HIPS @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA HIPS @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA HIPS @BBL X1C.json index 7f8204ab99..1b92494eac 100644 --- a/resources/profiles/BBL/filament/BETA/BETA HIPS @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA HIPS @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA HIPS @BBL X1C", "inherits": "BETA HIPS @base", "from": "system", - "setting_id": "BHIB00_00", + "setting_id": "mTcT8sCciWyX5enc", "instantiation": "true", "filament_max_volumetric_speed": [ "8", diff --git a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL H2D.json index 283b174880..dc5df41921 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PAHT-CF @BBL H2D", "inherits": "BETA PAHT-CF @base", "from": "system", - "setting_id": "BPAB00_01", + "setting_id": "YbYCVQd5IR0sQR8S", "instantiation": "true", "chamber_temperatures": [ "60" diff --git a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL P1P.json index 020684ae9d..6dc9175a2d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PAHT-CF @BBL P1P", "inherits": "BETA PAHT-CF @base", "from": "system", - "setting_id": "BPAB00_10", + "setting_id": "5O5fzmFrT3O1k1H0", "instantiation": "true", "filament_flow_ratio": [ "0.96", diff --git a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL X1C.json index 2d07f60dd7..6c456aa3eb 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PAHT-CF @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PAHT-CF @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PAHT-CF @BBL X1C", "inherits": "BETA PAHT-CF @base", "from": "system", - "setting_id": "BPAB00", + "setting_id": "gB5HLYTDCooFy2W5", "instantiation": "true", "chamber_temperatures": [ "60" diff --git a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL A1.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL A1.json index 5d2672ea39..bef1266f14 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PEBA 90A @BBL A1", "inherits": "BETA PEBA 90A @base", "from": "system", - "setting_id": "BPBB00_04", + "setting_id": "A57Sbar56Ah1NiU7", "instantiation": "true", "filament_density": [ "1.22" diff --git a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL A1M.json index 65a899ec25..feb281f605 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PEBA 90A @BBL A1M", "inherits": "BETA PEBA 90A @base", "from": "system", - "setting_id": "BPBB00_05", + "setting_id": "OoLkWS147R0AasZc", "instantiation": "true", "filament_density": [ "1.22" diff --git a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL H2D.json index 15e570c0ef..a5b0a4e46b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PEBA 90A @BBL H2D", "inherits": "BETA PEBA 90A @base", "from": "system", - "setting_id": "BPBB00_02", + "setting_id": "91b8WTzvOky9wAVK", "instantiation": "true", "additional_cooling_fan_speed": [ "100" diff --git a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL P1P.json index d84427a067..f5cc6b7f98 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PEBA 90A @BBL P1P", "inherits": "BETA PEBA 90A @base", "from": "system", - "setting_id": "BPBB00_01", + "setting_id": "ydudEBLRmj1WSXqB", "instantiation": "true", "filament_max_volumetric_speed": [ "2.8", diff --git a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL X1C.json index 9787ec8671..74c0bdd20d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PEBA 90A @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PEBA 90A @BBL X1C", "inherits": "BETA PEBA 90A @base", "from": "system", - "setting_id": "BPBB00_00", + "setting_id": "F1hTal3M92tBjv2N", "instantiation": "true", "filament_max_volumetric_speed": [ "2.8", diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL A1.json index e66cac62b6..9d6fc9329d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG @BBL A1", "inherits": "BETA PETG @base", "from": "system", - "setting_id": "BPGB00_06", + "setting_id": "EpYzxZwVHvLaseku", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL A1M 0.4 nozzle.json index 0831aa7d3e..7cac0a9bef 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG @BBL A1M 0.4 nozzle", "inherits": "BETA PETG @base", "from": "system", - "setting_id": "BPGB00_03", + "setting_id": "5V0hyhzFoDU8Tfwm", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL H2D 0.4 nozzle.json index 5f581768f2..c508f9041c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG @BBL H2D 0.4 nozzle", "inherits": "BETA PETG @base", "from": "system", - "setting_id": "BPGB00_09", + "setting_id": "KnKvUsD4rSpQU413", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL X1C.json index 5a92aaf386..5547610fcf 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG @BBL X1C", "inherits": "BETA PETG @base", "from": "system", - "setting_id": "BPGB00_01", + "setting_id": "uM6wHdt0N5ftZRge", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL A1.json index 4afed91de9..67e25a2c01 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Fluorescence @BBL A1", "inherits": "BETA PETG Fluorescence @base", "from": "system", - "setting_id": "BPGB02_06", + "setting_id": "ZtyTtAWsZnLGsM0O", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json index 3dea382bb2..a12cc74634 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Fluorescence @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Fluorescence @base", "from": "system", - "setting_id": "BPGB02_03", + "setting_id": "VUSunTT0OJa7iOSd", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json index 62dfb7753f..19f8879c41 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Fluorescence @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Fluorescence @base", "from": "system", - "setting_id": "BPGB02_09", + "setting_id": "JHg4y0pxAOtoJSuw", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL X1C.json index 88562c9da2..353498bf5c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Fluorescence @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Fluorescence @BBL X1C", "inherits": "BETA PETG Fluorescence @base", "from": "system", - "setting_id": "BPGB02_01", + "setting_id": "pCetfFvyLLw3vS2j", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL A1.json index d3a13707b4..6a97df7f55 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glitter @BBL A1", "inherits": "BETA PETG Glitter @base", "from": "system", - "setting_id": "BPGB03_06", + "setting_id": "cz5dC7OrXDlX1Ctj", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL A1M 0.4 nozzle.json index 2b12feac1e..dc051ee414 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glitter @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Glitter @base", "from": "system", - "setting_id": "BPGB03_03", + "setting_id": "PozWnOfZ2l7HqTpx", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL H2D 0.4 nozzle.json index 988f09054d..7d4b3bb5d5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glitter @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Glitter @base", "from": "system", - "setting_id": "BPGB03_09", + "setting_id": "ijW4zvNAQ3DIK984", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL X1C.json index 8eb9ef276f..18c99695f4 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glitter @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glitter @BBL X1C", "inherits": "BETA PETG Glitter @base", "from": "system", - "setting_id": "BPGB03_01", + "setting_id": "UI220qldPoLY8VZN", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL A1.json index 039a6b5a77..8c4d9a584a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glow @BBL A1", "inherits": "BETA PETG Glow @base", "from": "system", - "setting_id": "BPGB04_06", + "setting_id": "LudMQeiSJOLw0Aoy", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL A1M 0.4 nozzle.json index 30a1290c7f..f8d7d240f3 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glow @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Glow @base", "from": "system", - "setting_id": "BPGB04_03", + "setting_id": "cl1Rl9hgrahhhSd3", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL H2D 0.4 nozzle.json index d460a13719..9196aff31b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glow @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Glow @base", "from": "system", - "setting_id": "BPGB04_09", + "setting_id": "3s9w3mH6M4OdbrUV", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL X1C.json index e599deed02..42a4521212 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Glow @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Glow @BBL X1C", "inherits": "BETA PETG Glow @base", "from": "system", - "setting_id": "BPGB04_01", + "setting_id": "wv5FRKdnsHaIFA7L", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL A1.json index 8c732afcf6..0a753194b6 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Gradient @BBL A1", "inherits": "BETA PETG Gradient @base", "from": "system", - "setting_id": "BPGB05_06", + "setting_id": "L3hZggzEZUgUv0Qv", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL A1M 0.4 nozzle.json index c7dd29444b..7d5f7fba8b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Gradient @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Gradient @base", "from": "system", - "setting_id": "BPGB05_03", + "setting_id": "zsITnsNFRG7IE6sR", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL H2D 0.4 nozzle.json index 078a954fd6..b468069cb7 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Gradient @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Gradient @base", "from": "system", - "setting_id": "BPGB05_09", + "setting_id": "GqmCuPg6baUxeoYS", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL X1C.json index 0bca3fd849..48c3f30535 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Gradient @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Gradient @BBL X1C", "inherits": "BETA PETG Gradient @base", "from": "system", - "setting_id": "BPGB05_01", + "setting_id": "oYJjUiaCI4UBZ0ur", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL A1.json index 4fa56ff56c..fc7d4417e8 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG HF @BBL A1", "inherits": "BETA PETG HF @base", "from": "system", - "setting_id": "BPGB06_03", + "setting_id": "T2Ea25pM2u9BM7Oa", "instantiation": "true", "fan_cooling_layer_time": [ "15" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL A1M.json index 4594b057e3..c162f9b829 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PETG HF @BBL A1M", "inherits": "BETA PETG HF @base", "from": "system", - "setting_id": "BPGB06_06", + "setting_id": "nO5R86dkDle1m5Pq", "instantiation": "true", "fan_cooling_layer_time": [ "15" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL H2D 0.4 nozzle.json index 5af6977e37..f8bc99dd97 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG HF @BBL H2D 0.4 nozzle", "inherits": "BETA PETG HF @base", "from": "system", - "setting_id": "BPGB06_09", + "setting_id": "YOBguayM9PiwkpfT", "instantiation": "true", "counter_coef_2": [ "0.007" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL X1C.json index e880bef58f..d67f8d619e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG HF @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG HF @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG HF @BBL X1C", "inherits": "BETA PETG HF @base", "from": "system", - "setting_id": "BPGB06_00", + "setting_id": "EG3h0IHVO1yyVNMs", "instantiation": "true", "fan_cooling_layer_time": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1.json index 178a75b1cc..9ce4a5d5f4 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Heat Color Change @BBL A1", "inherits": "BETA PETG Heat Color Change @base", "from": "system", - "setting_id": "BPGB01_06", + "setting_id": "ZhHASdXFywqbRuBf", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json index 62371b18de..aa50a522ba 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Heat Color Change @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Heat Color Change @base", "from": "system", - "setting_id": "BPGB01_03", + "setting_id": "YiFgzCJDAOW9YSjZ", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json index e94aec5705..5f6706766a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Heat Color Change @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Heat Color Change @base", "from": "system", - "setting_id": "BPGB01_09", + "setting_id": "DpWgpTiKdm70Xt1i", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL X1C.json index 9b3cec67e5..b0e0ee39ca 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Heat Color Change @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Heat Color Change @BBL X1C", "inherits": "BETA PETG Heat Color Change @base", "from": "system", - "setting_id": "BPGB01_01", + "setting_id": "3lJe6ftSHQDkQZ1S", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL A1.json index 829f200312..1c8a6e7cf5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Marble @BBL A1", "inherits": "BETA PETG Marble @base", "from": "system", - "setting_id": "BPGB07_06", + "setting_id": "tSCDuE4dE44PyIwb", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL A1M 0.4 nozzle.json index b0cb67eb0e..0adda57b8f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Marble @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Marble @base", "from": "system", - "setting_id": "BPGB07_03", + "setting_id": "n6dguOo5ZleD6Ec4", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL H2D 0.4 nozzle.json index 2f510ad7ab..decfcb73a1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Marble @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Marble @base", "from": "system", - "setting_id": "BPGB07_09", + "setting_id": "RxCTxdvym4iNOB5j", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL X1C.json index 3b38034011..49ac9206f0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Marble @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Marble @BBL X1C", "inherits": "BETA PETG Marble @base", "from": "system", - "setting_id": "BPGB07_01", + "setting_id": "3BgsPAgilo1MgtOV", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL A1.json index a8062a0de5..bbac04c0b9 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Matte @BBL A1", "inherits": "BETA PETG Matte @base", "from": "system", - "setting_id": "BPGB08_06", + "setting_id": "zYkrzQk11C98R31F", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL A1M 0.4 nozzle.json index 2ed2cd9930..3408e81946 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Matte @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Matte @base", "from": "system", - "setting_id": "BPGB08_03", + "setting_id": "rzX5oP4037Ex5Chh", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL H2D 0.4 nozzle.json index edfdacc993..3287a32971 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Matte @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Matte @base", "from": "system", - "setting_id": "BPGB08_09", + "setting_id": "sqz8Vluq7GMd3siv", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL X1C.json index 763594b41d..d8f5548ba0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Matte @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Matte @BBL X1C", "inherits": "BETA PETG Matte @base", "from": "system", - "setting_id": "BPGB08_01", + "setting_id": "NXgqYCqHeVCgFF3I", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL A1.json index 715ebc1ad1..e378cf3de1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Metallic @BBL A1", "inherits": "BETA PETG Metallic @base", "from": "system", - "setting_id": "BPGB09_06", + "setting_id": "1baUIJ3P8n6DcyRc", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL A1M 0.4 nozzle.json index 85b11b2e80..6e1f1c1d30 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Metallic @BBL A1M 0.4 nozzle", "inherits": "BETA PETG Metallic @base", "from": "system", - "setting_id": "BPGB09_03", + "setting_id": "LMsVDqsChBksLNqL", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL H2D 0.4 nozzle.json index c00e63bf3d..c04e4513b5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Metallic @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Metallic @base", "from": "system", - "setting_id": "BPGB09_09", + "setting_id": "giq8BW6qcwz91e4C", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL X1C.json index 71f0be98d3..eaa3a9dae2 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Metallic @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Metallic @BBL X1C", "inherits": "BETA PETG Metallic @base", "from": "system", - "setting_id": "BPGB09_01", + "setting_id": "tZzoc2LdgWkpEiox", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL A1.json index 53202d68d2..e00ecd5b04 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG Transparent @BBL A1", "inherits": "BETA PETG Transparent @base", "from": "system", - "setting_id": "BPGB10_05", + "setting_id": "86loYV5S4bgO2FOx", "instantiation": "true", "filament_long_retractions_when_cut": [ "1" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL A1M.json index 0419cdd3d4..a8c9ca893d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PETG Transparent @BBL A1M", "inherits": "BETA PETG Transparent @base", "from": "system", - "setting_id": "BPGB10_02", + "setting_id": "c2xTYO07RC2G2xsv", "instantiation": "true", "filament_long_retractions_when_cut": [ "1" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL H2D 0.4 nozzle.json index e0e2c984aa..8e95c0e543 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG Transparent @BBL H2D 0.4 nozzle", "inherits": "BETA PETG Transparent @base", "from": "system", - "setting_id": "BPGB10_06", + "setting_id": "GkC5T0RX0meiLVKg", "instantiation": "true", "filament_deretraction_speed": [ "nil", diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL X1C.json index 102dbce7bf..9d2e347f64 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG Transparent @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG Transparent @BBL X1C", "inherits": "BETA PETG Transparent @base", "from": "system", - "setting_id": "BPGB10_00", + "setting_id": "doyjzbrEn9akgjvG", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL A1.json index fd0e5b8e0d..9f34c89591 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PETG UV Color Change @BBL A1", "inherits": "BETA PETG UV Color Change @base", "from": "system", - "setting_id": "BPGB11_06", + "setting_id": "CeepF0rRLZ5fzBwm", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json index 9b8d64318c..8a9f8d28d6 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG UV Color Change @BBL A1M 0.4 nozzle", "inherits": "BETA PETG UV Color Change @base", "from": "system", - "setting_id": "BPGB11_03", + "setting_id": "Atb1esrVdoWBK97e", "instantiation": "true", "fan_max_speed": [ "50" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json index 2ff953dc88..03f0000a35 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG UV Color Change @BBL H2D 0.4 nozzle", "inherits": "BETA PETG UV Color Change @base", "from": "system", - "setting_id": "BPGB11_09", + "setting_id": "Ic0NUfwLmR0NSh5q", "instantiation": "true", "fan_max_speed": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL X1C.json index cd5be66bf3..32eaa333cf 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG UV Color Change @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PETG UV Color Change @BBL X1C", "inherits": "BETA PETG UV Color Change @base", "from": "system", - "setting_id": "BPGB11_01", + "setting_id": "BUKCpukEUmocfz3v", "instantiation": "true", "fan_min_speed": [ "20" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL A1 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL A1 0.4 nozzle.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL A1 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL A1 0.4 nozzle.json index 4e15c8fc86..c0ed516884 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL A1 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL A1 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-CF @BBL A1 0.4 nozzle", "inherits": "BETA PETG-CF @base", "from": "system", - "setting_id": "BPGB12_05", + "setting_id": "2ysJdw1MuW8VLmny", "instantiation": "true", "fan_cooling_layer_time": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL A1M 0.4 nozzle.json similarity index 88% rename from resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL A1M 0.4 nozzle.json index d19e61f946..9dee306a03 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-CF @BBL A1M 0.4 nozzle", "inherits": "BETA PETG-CF @base", "from": "system", - "setting_id": "BPGB12_04", + "setting_id": "eZsa6noZZUahQeBp", "instantiation": "true", "filament_max_volumetric_speed": [ "9" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL H2D 0.4 nozzle.json index fd47d4f843..22af1e06ff 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-CF @BBL H2D 0.4 nozzle", "inherits": "BETA PETG-CF @base", "from": "system", - "setting_id": "BPGB12_08", + "setting_id": "YRUDQs5jE1d1BGTY", "instantiation": "true", "counter_coef_2": [ "0.00565" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL P1P 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL P1P 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL P1P 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL P1P 0.4 nozzle.json index 845086dfe1..f1a7334810 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL P1P 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL P1P 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-CF @BBL P1P 0.4 nozzle", "inherits": "BETA PETG-CF @base", "from": "system", - "setting_id": "BPGB12_03", + "setting_id": "i1OjgC3I96a1Trb8", "instantiation": "true", "fan_cooling_layer_time": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL X1C 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL X1C 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL X1C 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL X1C 0.4 nozzle.json index 4c8bf18ae3..273260a31f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-CF @BBL X1C 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-CF @BBL X1C 0.4 nozzle", "inherits": "BETA PETG-CF @base", "from": "system", - "setting_id": "BPGB12_02", + "setting_id": "0p4213iz0b9fbeKO", "instantiation": "true", "fan_cooling_layer_time": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL A1 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL A1 0.4 nozzle.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL A1 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL A1 0.4 nozzle.json index 719dd3ddfe..0aac4d7f04 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL A1 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL A1 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-GF @BBL A1 0.4 nozzle", "inherits": "BETA PETG-GF @base", "from": "system", - "setting_id": "BPGB13_05", + "setting_id": "mUZlODC7TvISFthv", "instantiation": "true", "fan_cooling_layer_time": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL A1M 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL A1M 0.4 nozzle.json similarity index 88% rename from resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL A1M 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL A1M 0.4 nozzle.json index f874d81f46..ed98f6337f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL A1M 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL A1M 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-GF @BBL A1M 0.4 nozzle", "inherits": "BETA PETG-GF @base", "from": "system", - "setting_id": "BPGB13_04", + "setting_id": "9Rh7EvY3QZm07VNe", "instantiation": "true", "filament_max_volumetric_speed": [ "9" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL H2D 0.4 nozzle.json index fd093d8506..277d1915b1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-GF @BBL H2D 0.4 nozzle", "inherits": "BETA PETG-GF @base", "from": "system", - "setting_id": "BPGB13_08", + "setting_id": "SOA1XFfdBEV4MEJy", "instantiation": "true", "counter_coef_2": [ "0.00565" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL P1P 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL P1P 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL P1P 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL P1P 0.4 nozzle.json index f700b2149e..a94fc48630 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL P1P 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL P1P 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-GF @BBL P1P 0.4 nozzle", "inherits": "BETA PETG-GF @base", "from": "system", - "setting_id": "BPGB13_03", + "setting_id": "tGtdR6vVNrTU26eI", "instantiation": "true", "fan_cooling_layer_time": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL X1C 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL X1C 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL X1C 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL X1C 0.4 nozzle.json index 32b0daf255..db3ecc90d9 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @BBL X1C 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PETG-GF @BBL X1C 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PETG-GF @BBL X1C 0.4 nozzle", "inherits": "BETA PETG-GF @base", "from": "system", - "setting_id": "BPGB13_02", + "setting_id": "Z6dHVj1BKTJT7305", "instantiation": "true", "fan_cooling_layer_time": [ "30" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL A1.json index 3e0545627d..5dd32459b3 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Basic @BBL A1", "inherits": "BETA PLA Basic @base", "from": "system", - "setting_id": "BPLB00_04", + "setting_id": "e6tjM1Pa81eCsCVa", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL A1M.json index 074c8bbad6..78ba2bb9eb 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Basic @BBL A1M", "inherits": "BETA PLA Basic @base", "from": "system", - "setting_id": "BPLB00_02", + "setting_id": "Uw0Gm74RTGBUcOYK", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL H2D.json index f309ce4697..97e462a487 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Basic @BBL H2D", "inherits": "BETA PLA Basic @base", "from": "system", - "setting_id": "BPLB00_12", + "setting_id": "LZBgJ5xFtzrt3v02", "instantiation": "true", "additional_cooling_fan_speed": [ "75" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL P1P.json index a9b3b41e67..99214e744d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Basic @BBL P1P", "inherits": "BETA PLA Basic @base", "from": "system", - "setting_id": "BPLB00_10", + "setting_id": "lh6niwL4m4XkSf8W", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL X1C.json index 2efae39e66..c50f60f49c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Basic @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Basic @BBL X1C", "inherits": "BETA PLA Basic @base", "from": "system", - "setting_id": "BPLB00", + "setting_id": "D5Ac9gZkax8dSVtV", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL A1.json index da7e730707..bc2af1a623 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Chameleon @BBL A1", "inherits": "BETA PLA Chameleon @base", "from": "system", - "setting_id": "BPLB02_03", + "setting_id": "vEjSWxmmbBWpuaRq", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL A1M.json index 667a27517c..8d2dd918e9 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Chameleon @BBL A1M", "inherits": "BETA PLA Chameleon @base", "from": "system", - "setting_id": "BPLB02_02", + "setting_id": "TAwpOCw19HhlNsMH", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL H2D.json index 61921e055e..b2bae83295 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Chameleon @BBL H2D", "inherits": "BETA PLA Chameleon @base", "from": "system", - "setting_id": "BPLB02_04", + "setting_id": "vG7kTitKJp5cBs3q", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL P1P.json index 896b695cad..ea66c51982 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Chameleon @BBL P1P", "inherits": "BETA PLA Chameleon @base", "from": "system", - "setting_id": "BPLB02_10", + "setting_id": "WGrBGAllXKxuLzjs", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL X1C.json index ecc1332410..e1ec162a69 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Chameleon @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Chameleon @BBL X1C", "inherits": "BETA PLA Chameleon @base", "from": "system", - "setting_id": "BPLB02_00", + "setting_id": "EfLqGX43NXNKKbWt", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL A1.json index 07ccf57777..021a32a374 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Fluorescence @BBL A1", "inherits": "BETA PLA Fluorescence @base", "from": "system", - "setting_id": "BPLB04_03", + "setting_id": "iyInqcqIjcvTJAKF", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL A1M.json index fe2a32394a..5bbfa583bc 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Fluorescence @BBL A1M", "inherits": "BETA PLA Fluorescence @base", "from": "system", - "setting_id": "BPLB04_02", + "setting_id": "A1f81XZTI4THuOrz", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL H2D.json index 4dfe6a3041..50390428cc 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Fluorescence @BBL H2D", "inherits": "BETA PLA Fluorescence @base", "from": "system", - "setting_id": "BPLB04_04", + "setting_id": "gcP4tfP34Xz6A1aX", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL P1P.json index fa085c4b5b..a786a7aa36 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Fluorescence @BBL P1P", "inherits": "BETA PLA Fluorescence @base", "from": "system", - "setting_id": "BPLB04_10", + "setting_id": "VXtzYPTfTHywigT5", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL X1C.json index f7930db006..ef2188514c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Fluorescence @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Fluorescence @BBL X1C", "inherits": "BETA PLA Fluorescence @base", "from": "system", - "setting_id": "BPLB04_00", + "setting_id": "2nZDf5vDbWMzG91Q", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL A1.json index a50ea558f6..271a16779c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glitter @BBL A1", "inherits": "BETA PLA Glitter @base", "from": "system", - "setting_id": "BPLB05_03", + "setting_id": "OSPJASUk0Pg4tbVq", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL A1M.json index e9f9995415..f9c7b13966 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glitter @BBL A1M", "inherits": "BETA PLA Glitter @base", "from": "system", - "setting_id": "BPLB05_02", + "setting_id": "TwCRZOBSByKVOpWu", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL H2D.json index 30a169c731..de6665e0ef 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glitter @BBL H2D", "inherits": "BETA PLA Glitter @base", "from": "system", - "setting_id": "BPLB05_04", + "setting_id": "V21QsVHdIu9O5x8H", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL P1P.json index 56fbd91b1f..c7cb14bea3 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glitter @BBL P1P", "inherits": "BETA PLA Glitter @base", "from": "system", - "setting_id": "BPLB05_10", + "setting_id": "6j8mVocsMSyMcN7W", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL X1C.json index 27ef9b6bb1..97335ee8ba 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glitter @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glitter @BBL X1C", "inherits": "BETA PLA Glitter @base", "from": "system", - "setting_id": "BPLB05_00", + "setting_id": "9xX3mgUo5cbNvn1G", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL A1.json index b3e3f5810f..bf3ee29978 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glow @BBL A1", "inherits": "BETA PLA Glow @base", "from": "system", - "setting_id": "BPLB06_11", + "setting_id": "5CBeJCmUFnmeran7", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL A1M.json index ce16e93ea2..99725d2707 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glow @BBL A1M", "inherits": "BETA PLA Glow @base", "from": "system", - "setting_id": "BPLB06_16", + "setting_id": "E9Dx6JqlKJSObUbH", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL H2D.json index f36dad2a44..ef4fdb473b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glow @BBL H2D", "inherits": "BETA PLA Glow @base", "from": "system", - "setting_id": "BPLB06_06", + "setting_id": "3V9M3nMyxMHZPw86", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL P1P.json index 4e1abbead0..f19705f369 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glow @BBL P1P", "inherits": "BETA PLA Glow @base", "from": "system", - "setting_id": "BPLB06_02", + "setting_id": "iYLZEeO84vkLMKTI", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL X1C.json index b7ed381bd3..b6d88f2cdc 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Glow @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Glow @BBL X1C", "inherits": "BETA PLA Glow @base", "from": "system", - "setting_id": "BPLB06_00", + "setting_id": "t2r0gXudUDKwtqiq", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL A1.json index 93a1e0c8a7..e178d3ff99 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Gradient @BBL A1", "inherits": "BETA PLA Gradient @base", "from": "system", - "setting_id": "BPLB07_03", + "setting_id": "425v7oGgeTL6iomC", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL A1M.json index a29b928941..36a9d142ad 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Gradient @BBL A1M", "inherits": "BETA PLA Gradient @base", "from": "system", - "setting_id": "BPLB07_02", + "setting_id": "X8Y4YSnjlFf9mSIB", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL H2D.json index 3657d33348..23d5f31d21 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Gradient @BBL H2D", "inherits": "BETA PLA Gradient @base", "from": "system", - "setting_id": "BPLB07_04", + "setting_id": "YGTS7nibKyJKDcU4", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL P1P.json index 38ca268766..15b6d22f5e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Gradient @BBL P1P", "inherits": "BETA PLA Gradient @base", "from": "system", - "setting_id": "BPLB07_10", + "setting_id": "qSQlI3DJHr4ILcB2", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL X1C.json index 28167832c7..ec1845f924 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Gradient @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Gradient @BBL X1C", "inherits": "BETA PLA Gradient @base", "from": "system", - "setting_id": "BPLB07_00", + "setting_id": "d7p2sIDTErREL4Kl", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1.json index f07c12540f..ca08ac0b4e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Heat Color Change @BBL A1", "inherits": "BETA PLA Heat Color Change @base", "from": "system", - "setting_id": "BPLB03_03", + "setting_id": "5j48tMo1EVC3xQIy", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1M.json index 057ac94128..2a3ef9a0b4 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Heat Color Change @BBL A1M", "inherits": "BETA PLA Heat Color Change @base", "from": "system", - "setting_id": "BPLB03_02", + "setting_id": "revg1V2Pi8iCfrxi", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL H2D.json index 7777bdb4ca..6c9d1605fb 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Heat Color Change @BBL H2D", "inherits": "BETA PLA Heat Color Change @base", "from": "system", - "setting_id": "BPLB03_04", + "setting_id": "4gszgdDD34i0PqNB", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL P1P.json index 0b8b264d0f..b789e28638 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Heat Color Change @BBL P1P", "inherits": "BETA PLA Heat Color Change @base", "from": "system", - "setting_id": "BPLB03_10", + "setting_id": "nNjRbHDsEfiCaAlB", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL X1C.json index 96ae68563e..ed8b6c8589 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Heat Color Change @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Heat Color Change @BBL X1C", "inherits": "BETA PLA Heat Color Change @base", "from": "system", - "setting_id": "BPLB03_00", + "setting_id": "UxrUKGG8X65QaY8e", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL A1.json index 0f8dc55aec..a3fb1f92e7 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Speed @BBL A1", "inherits": "BETA PLA High Speed @base", "from": "system", - "setting_id": "BPLB20_04", + "setting_id": "BGnydxe8BWKLWGUh", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL A1M.json index a9a989fa0b..714f84f727 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Speed @BBL A1M", "inherits": "BETA PLA High Speed @base", "from": "system", - "setting_id": "BPLB20_06", + "setting_id": "c9A7frKuehrQbxga", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL H2D.json index c353b206f8..01bd6e5701 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Speed @BBL H2D", "inherits": "BETA PLA High Speed @base", "from": "system", - "setting_id": "BPLB20_08", + "setting_id": "n9Bq9aOUoHA2d5aj", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL P1P.json index 36f42f9c42..b2f9e5ad9d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Speed @BBL P1P", "inherits": "BETA PLA High Speed @base", "from": "system", - "setting_id": "BPLB20_02", + "setting_id": "OSqz4aXmaTf5UeNx", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL X1C.json index 0c6aa6b8b2..7babfd0ad0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Speed @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Speed @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Speed @BBL X1C", "inherits": "BETA PLA High Speed @base", "from": "system", - "setting_id": "BPLB20_00", + "setting_id": "Ikl9jwlTBbGAgccp", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL A1.json index b8ccc3af16..84769a0374 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Temp @BBL A1", "inherits": "BETA PLA High Temp @base", "from": "system", - "setting_id": "BPLB18_05", + "setting_id": "hiRu8jlZ2NW4LlPH", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL A1M.json index c7bca3f5c4..2caae4c09d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Temp @BBL A1M", "inherits": "BETA PLA High Temp @base", "from": "system", - "setting_id": "BPLB18_07", + "setting_id": "Dg4tIm8P04KTRbeo", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL H2D.json index 08653bbf37..4047850988 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Temp @BBL H2D", "inherits": "BETA PLA High Temp @base", "from": "system", - "setting_id": "BPLB18_09", + "setting_id": "5F1rml3AGNMD6F1g", "instantiation": "true", "additional_cooling_fan_speed": [ "75" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL P1P.json index 25a0522a02..91f72cdfb0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Temp @BBL P1P", "inherits": "BETA PLA High Temp @base", "from": "system", - "setting_id": "BPLB18_03", + "setting_id": "EeBCe9mT3aa8GY6E", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL X1C.json index e221c28c18..f0202e0fc1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA High Temp @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA High Temp @BBL X1C", "inherits": "BETA PLA High Temp @base", "from": "system", - "setting_id": "BPLB18_00", + "setting_id": "YuUxUrDHm5pkQJ00", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL A1.json index 4bff45b61d..fad6908ea2 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Marble @BBL A1", "inherits": "BETA PLA Marble @base", "from": "system", - "setting_id": "BPLB08_03", + "setting_id": "HUIyHrpR1NeXtq2U", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL A1M.json index 3ad98ecb34..631d702b60 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Marble @BBL A1M", "inherits": "BETA PLA Marble @base", "from": "system", - "setting_id": "BPLB08_02", + "setting_id": "tizFbLmroyCZkYwM", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL H2D.json index decacdcc40..1ef7104002 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Marble @BBL H2D", "inherits": "BETA PLA Marble @base", "from": "system", - "setting_id": "BPLB08_04", + "setting_id": "HQiUpjhYDmRgfE58", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL P1P.json index 2e7cf93c79..a198637db6 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Marble @BBL P1P", "inherits": "BETA PLA Marble @base", "from": "system", - "setting_id": "BPLB08_10", + "setting_id": "vL5v8bp6NzR0rDLx", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL X1C.json index bfc904d686..58a42b7452 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Marble @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Marble @BBL X1C", "inherits": "BETA PLA Marble @base", "from": "system", - "setting_id": "BPLB08_00", + "setting_id": "nNLxWZNjsSJ6hgoi", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL A1.json index 5791eaacb1..eafde54097 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Matte @BBL A1", "inherits": "BETA PLA Matte @base", "from": "system", - "setting_id": "BPLB09_04", + "setting_id": "FcoZYFxLOjcwqHeK", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL A1M.json index d2dace4b32..d35c947f36 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Matte @BBL A1M", "inherits": "BETA PLA Matte @base", "from": "system", - "setting_id": "BPLB09_02", + "setting_id": "ZKRYRXFXljR57zqd", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL H2D.json index ef3fa05d53..bc595e11b5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Matte @BBL H2D", "inherits": "BETA PLA Matte @base", "from": "system", - "setting_id": "BPLB09_05", + "setting_id": "Zw3CZVyBon930GCH", "instantiation": "true", "additional_cooling_fan_speed": [ "75" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL P1P.json index 8076797fb8..6331679d0c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Matte @BBL P1P", "inherits": "BETA PLA Matte @base", "from": "system", - "setting_id": "BPLB09_10", + "setting_id": "twKgWxS55toXm9pS", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL X1C.json index dea5b1f08b..9214f71190 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Matte @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Matte @BBL X1C", "inherits": "BETA PLA Matte @base", "from": "system", - "setting_id": "BPLB09", + "setting_id": "R9ZZzNBbymoFbwoD", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL A1.json index 0824f7da2a..6362a7cd3d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metal @BBL A1", "inherits": "BETA PLA Metal @base", "from": "system", - "setting_id": "BPLB10_04", + "setting_id": "fXRyE1fu4AtA5AdK", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL A1M.json index 7c845e3bc0..8a60fd062a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metal @BBL A1M", "inherits": "BETA PLA Metal @base", "from": "system", - "setting_id": "BPLB10_00", + "setting_id": "flbisIR5Js1cFyUe", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL H2D.json index 7dd3a3f16d..7ff82b8ae0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metal @BBL H2D", "inherits": "BETA PLA Metal @base", "from": "system", - "setting_id": "BPLB10_07", + "setting_id": "iuy4UVicjmTl5B0i", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL P1P.json index 48eede1a01..512647c8ac 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metal @BBL P1P", "inherits": "BETA PLA Metal @base", "from": "system", - "setting_id": "BPLB10_10", + "setting_id": "nEkQaDE7Ps8lSN5M", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL X1C.json index 263bf64877..342feb455d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metal @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metal @BBL X1C", "inherits": "BETA PLA Metal @base", "from": "system", - "setting_id": "BPLB10", + "setting_id": "RkaFgVuA3VCXCUwR", "instantiation": "true", "filament_max_volumetric_speed": [ "21", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL A1.json index 87c03f5dc7..18c962f034 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metallic @BBL A1", "inherits": "BETA PLA Metallic @base", "from": "system", - "setting_id": "BPLB11_04", + "setting_id": "Uqkj3TepJG7iMPQG", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL A1M.json index 685c0be389..e0600f6ae0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metallic @BBL A1M", "inherits": "BETA PLA Metallic @base", "from": "system", - "setting_id": "BPLB11_00", + "setting_id": "LaqMwUAucC9o1Iwn", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL H2D.json index 23e0eada1d..d9a181f2ba 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metallic @BBL H2D", "inherits": "BETA PLA Metallic @base", "from": "system", - "setting_id": "BPLB11_07", + "setting_id": "S5UzAJasZ5CyEmfL", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL P1P.json index eb1d1f6804..cdb7e0a72d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metallic @BBL P1P", "inherits": "BETA PLA Metallic @base", "from": "system", - "setting_id": "BPLB11_10", + "setting_id": "xyNibP5nFO0inDjx", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL X1C.json index edc372c4c8..0387582b90 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Metallic @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Metallic @BBL X1C", "inherits": "BETA PLA Metallic @base", "from": "system", - "setting_id": "BPLB11", + "setting_id": "vXm2F0GQvACSRrDF", "instantiation": "true", "filament_max_volumetric_speed": [ "21", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL A1.json index c8b2a6fa6a..5366e04cf5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA PRO @BBL A1", "inherits": "BETA PLA PRO @base", "from": "system", - "setting_id": "BPLB12_04", + "setting_id": "SiBlaw6JN4thc2v7", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL A1M.json index fe1de91251..215c2b6e4e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA PRO @BBL A1M", "inherits": "BETA PLA PRO @base", "from": "system", - "setting_id": "BPLB12_02", + "setting_id": "3PLh2oirCzwxIYY7", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL H2D.json index 13aaebc092..605e1e9a37 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA PRO @BBL H2D", "inherits": "BETA PLA PRO @base", "from": "system", - "setting_id": "BPLB12_12", + "setting_id": "Mth7IAdxkWf7pSSj", "instantiation": "true", "additional_cooling_fan_speed": [ "75" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL P1P.json index ded38c78d8..35d88a6d9f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA PRO @BBL P1P", "inherits": "BETA PLA PRO @base", "from": "system", - "setting_id": "BPLB12_10", + "setting_id": "TbpMpIJpBn6t93fw", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL X1C.json index bb7581f809..b35f73cc70 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA PRO @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA PRO @BBL X1C", "inherits": "BETA PLA PRO @base", "from": "system", - "setting_id": "BPLB12", + "setting_id": "vGDfXmE1VEysXtAO", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL A1.json index 0fa19d6760..7431ae5cfb 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk @BBL A1", "inherits": "BETA PLA Silk @base", "from": "system", - "setting_id": "BPLB13_05", + "setting_id": "YX4fP5hZvz8u47CE", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL A1M.json index eb9a1c4d17..a04e603208 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk @BBL A1M", "inherits": "BETA PLA Silk @base", "from": "system", - "setting_id": "BPLB13_03", + "setting_id": "ebNsrfIGYb2cWiFZ", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL H2D.json index 513d2a4aa7..943bdfaf11 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk @BBL H2D", "inherits": "BETA PLA Silk @base", "from": "system", - "setting_id": "BPLB13_16", + "setting_id": "qXuac1ixZ4VdWMyA", "instantiation": "true", "additional_cooling_fan_speed": [ "75" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL P1P.json index e8cbc2e14b..8967b90534 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk @BBL P1P", "inherits": "BETA PLA Silk @base", "from": "system", - "setting_id": "BPLB13_12", + "setting_id": "AjbwkQMcmhlbU05G", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL X1C.json index 8a7e3eff50..5a94b4e94b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk @BBL X1C", "inherits": "BETA PLA Silk @base", "from": "system", - "setting_id": "BPLB13_01", + "setting_id": "WfQvql8IUq5wYZy2", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL A1.json index fde75ade2b..7dd7287011 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk+ @BBL A1", "inherits": "BETA PLA Silk+ @base", "from": "system", - "setting_id": "BPLB01_05", + "setting_id": "tuARzQoSxOfqBGVB", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL A1M.json index 2f7caa3f45..343cef28a0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk+ @BBL A1M", "inherits": "BETA PLA Silk+ @base", "from": "system", - "setting_id": "BPLB01_07", + "setting_id": "FYOjtlcF2X4JJTW2", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL H2D.json index 244dab338f..35d9da0d5c 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk+ @BBL H2D", "inherits": "BETA PLA Silk+ @base", "from": "system", - "setting_id": "BPLB01_09", + "setting_id": "4aj9YjpmJDQoTIv7", "instantiation": "true", "additional_cooling_fan_speed": [ "75" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL P1P.json index f809b6d7e9..0655808c45 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk+ @BBL P1P", "inherits": "BETA PLA Silk+ @base", "from": "system", - "setting_id": "BPLB01_03", + "setting_id": "2zazn2f141IdduiF", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL X1C.json index 065b493b2c..f4061a43c5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Silk+ @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Silk+ @BBL X1C", "inherits": "BETA PLA Silk+ @base", "from": "system", - "setting_id": "BPLB01_00", + "setting_id": "II7v6FJKAEfsHPsC", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL A1.json similarity index 96% rename from resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL A1.json index 2a84d1f507..80c20b5305 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Transparent @BBL A1", "inherits": "BETA PLA Transparent @base", "from": "system", - "setting_id": "BPLB14_06", + "setting_id": "V0vkf3I1WVUAqxoF", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL A1M.json similarity index 96% rename from resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL A1M.json index 94753a2b93..d573615c6e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Transparent @BBL A1M", "inherits": "BETA PLA Transparent @base", "from": "system", - "setting_id": "BPLB14_09", + "setting_id": "Byg1D2JdNLqdxm0F", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL H2D.json index 3d11c50857..6932a2a9b1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Transparent @BBL H2D", "inherits": "BETA PLA Transparent @base", "from": "system", - "setting_id": "BPLB14_12", + "setting_id": "1l2wIbU3KDjwmUVY", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL P1P.json index a180a2a124..3ab7af716f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Transparent @BBL P1P", "inherits": "BETA PLA Transparent @base", "from": "system", - "setting_id": "BPLB14_03", + "setting_id": "lkk8IBexAioV8IVA", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL X1C.json index 072bb2ec9c..0c564fe5d0 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Transparent @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Transparent @BBL X1C", "inherits": "BETA PLA Transparent @base", "from": "system", - "setting_id": "BPLB14_00", + "setting_id": "irzqsuMp63Uk5U3F", "instantiation": "true", "description": "The generic presets are conservatively tuned for compatibility with a wider range of filaments. For higher printing quality and speeds, please use Bambu filaments with Bambu presets.", "filament_retract_before_wipe": [ diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL A1.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL A1.json index f9016e233b..1cb752641a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA UV Color Change @BBL A1", "inherits": "BETA PLA UV Color Change @base", "from": "system", - "setting_id": "BPLB15_11", + "setting_id": "JrWOMe0rkRqc1Ke4", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL A1M.json index da74968584..9f2b89b70e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA UV Color Change @BBL A1M", "inherits": "BETA PLA UV Color Change @base", "from": "system", - "setting_id": "BPLB15_16", + "setting_id": "7V4HEL5PUiStwzpz", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL H2D.json index 5d23c31585..2e086ef2c9 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA UV Color Change @BBL H2D", "inherits": "BETA PLA UV Color Change @base", "from": "system", - "setting_id": "BPLB15_06", + "setting_id": "oOCiCsRmcy4hRZ45", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL P1P.json index 4ec6559082..15309bbca5 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA UV Color Change @BBL P1P", "inherits": "BETA PLA UV Color Change @base", "from": "system", - "setting_id": "BPLB15_02", + "setting_id": "lxVwiIRA5WN0N2TU", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL X1C.json index f990e19fbe..050907b9da 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA UV Color Change @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA UV Color Change @BBL X1C", "inherits": "BETA PLA UV Color Change @base", "from": "system", - "setting_id": "BPLB15_00", + "setting_id": "PRWqTkiWEkWOiXFA", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL A1.json similarity index 96% rename from resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL A1.json index 59a931d95d..1782275869 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Wood @BBL A1", "inherits": "BETA PLA Wood @base", "from": "system", - "setting_id": "BPLB19_04", + "setting_id": "NnfeDQPSJ3lnrAw9", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL A1M.json similarity index 97% rename from resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL A1M.json index ee662f0c7b..755497f89b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Wood @BBL A1M", "inherits": "BETA PLA Wood @base", "from": "system", - "setting_id": "BPLB19_05", + "setting_id": "GXigA5h84gA4KRH3", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL H2D.json index 74c43f6e6b..07f19819fc 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Wood @BBL H2D", "inherits": "BETA PLA Wood @base", "from": "system", - "setting_id": "BPLB19_06", + "setting_id": "8KPAmWj4bJ2P4gAn", "instantiation": "true", "eng_plate_temp": [ "55" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL P1P.json index eb0c56df11..62d5a28a78 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Wood @BBL P1P", "inherits": "BETA PLA Wood @base", "from": "system", - "setting_id": "BPLB19_03", + "setting_id": "mcsmTaMSaWs2RBvn", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL X1C.json index 9ada7a13f1..e000cf0259 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Wood @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Wood @BBL X1C", "inherits": "BETA PLA Wood @base", "from": "system", - "setting_id": "BPLB19_00", + "setting_id": "TI16gHjo52VFaAW1", "instantiation": "true", "filament_flow_ratio": [ "0.98", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL A1.json index c2fa4faa80..fcfd4f3774 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA Youth @BBL A1", "inherits": "BETA PLA Youth @base", "from": "system", - "setting_id": "BPLB16_04", + "setting_id": "jVWf9kiFpfmxFlw6", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL A1M.json index 799c3c13db..e8e6da828a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA Youth @BBL A1M", "inherits": "BETA PLA Youth @base", "from": "system", - "setting_id": "BPLB16_02", + "setting_id": "OfKH1gaVgx1adGeJ", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL H2D.json index 66520b424e..4b1b4b9a50 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA PLA Youth @BBL H2D", "inherits": "BETA PLA Youth @base", "from": "system", - "setting_id": "BPLB16_05", + "setting_id": "ZtgqauY30xyhRIB3", "instantiation": "true", "additional_cooling_fan_speed": [ "75" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL P1P.json index 2afbb6da25..a40b68fbc3 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA Youth @BBL P1P", "inherits": "BETA PLA Youth @base", "from": "system", - "setting_id": "BPLB16_10", + "setting_id": "9vXzlNUSu4TNwDJU", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL X1C.json index e80eb16387..f073c1dab8 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA Youth @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA Youth @BBL X1C", "inherits": "BETA PLA Youth @base", "from": "system", - "setting_id": "BPLB16", + "setting_id": "CjlZ1vLEO5q9poBI", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL A1.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL A1.json index 8aab52aaff..9412797e04 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA PLA-CF @BBL A1", "inherits": "BETA PLA-CF @base", "from": "system", - "setting_id": "BPLB17_04", + "setting_id": "BrCWtHyjzY4HmH3d", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL A1M.json similarity index 95% rename from resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL A1M.json index 4ccfd18683..344eb03185 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA PLA-CF @BBL A1M", "inherits": "BETA PLA-CF @base", "from": "system", - "setting_id": "BPLB17_00", + "setting_id": "IWXiKjynDITAsjK6", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL H2D 0.4 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL H2D 0.4 nozzle.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL H2D 0.4 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL H2D 0.4 nozzle.json index 320aee32e5..892c56cf9f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL H2D 0.4 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL H2D 0.4 nozzle.json @@ -3,7 +3,7 @@ "name": "BETA PLA-CF @BBL H2D 0.4 nozzle", "inherits": "BETA PLA-CF @base", "from": "system", - "setting_id": "BPLB17_08", + "setting_id": "xwMsvH6rRcJMpVlv", "instantiation": "true", "counter_coef_2": [ "0.012" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL P1P.json index 499a024436..d7e1cf9423 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA PLA-CF @BBL P1P", "inherits": "BETA PLA-CF @base", "from": "system", - "setting_id": "BPLB17_10", + "setting_id": "zLVxbFEuXKyzoI7M", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL X1C.json index 0f123a7e5a..ae78bbd234 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA PLA-CF @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA PLA-CF @BBL X1C", "inherits": "BETA PLA-CF @base", "from": "system", - "setting_id": "BPLB17_01", + "setting_id": "OnU9q1dVgATPktPE", "instantiation": "true", "filament_long_retractions_when_cut": [ "1", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL A1.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL A1.json index 35e3010043..82b5dcda5e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA TPU 90A @BBL A1", "inherits": "BETA TPU 90A @base", "from": "system", - "setting_id": "BTUB00_04", + "setting_id": "kJCrh3pbuHtgOzPo", "instantiation": "true", "filament_density": [ "1.22" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL A1M.json index e4a5c32532..0ac15e9a90 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA TPU 90A @BBL A1M", "inherits": "BETA TPU 90A @base", "from": "system", - "setting_id": "BTUB00_05", + "setting_id": "r1Upv1GORMLTOi0k", "instantiation": "true", "filament_density": [ "1.22" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL H2D.json index d37436075b..8eb8e80392 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA TPU 90A @BBL H2D", "inherits": "BETA TPU 90A @base", "from": "system", - "setting_id": "BTUB00_02", + "setting_id": "lm5PEdmOJODAz6KJ", "instantiation": "true", "additional_cooling_fan_speed": [ "100" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL P1P.json index 2b599ce405..65070fff7b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA TPU 90A @BBL P1P", "inherits": "BETA TPU 90A @base", "from": "system", - "setting_id": "BTUB00_01", + "setting_id": "OourWlFV3alIJBzh", "instantiation": "true", "filament_max_volumetric_speed": [ "2.8", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL X1C.json index 00935d8509..b95218473a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 90A @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 90A @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA TPU 90A @BBL X1C", "inherits": "BETA TPU 90A @base", "from": "system", - "setting_id": "BTUB00_00", + "setting_id": "nLIwjhps5uVtTuo4", "instantiation": "true", "filament_max_volumetric_speed": [ "2.8", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL A1.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL A1.json index 7a7432b1c0..716d6a743b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA TPU 95A @BBL A1", "inherits": "BETA TPU 95A @base", "from": "system", - "setting_id": "BTUB02_01", + "setting_id": "OOPUx5d9zREy0XXN", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL A1M.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL A1M.json index a6d90ba06a..12f9bf0f0b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA TPU 95A @BBL A1M", "inherits": "BETA TPU 95A @base", "from": "system", - "setting_id": "BTUB02_00", + "setting_id": "rNCp3fE6g2C8sd7S", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL H2D.json index dcce8d00cb..62cdeadad1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA TPU 95A @BBL H2D", "inherits": "BETA TPU 95A @base", "from": "system", - "setting_id": "BTUB02_03", + "setting_id": "k6clcTFJXTGVdmZg", "instantiation": "true", "additional_cooling_fan_speed": [ "100" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL P1P.json index a2fb288291..d16b0ae94a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA TPU 95A @BBL P1P", "inherits": "BETA TPU 95A @base", "from": "system", - "setting_id": "BTUB02_10", + "setting_id": "RaXgc8QZiSW0tsnD", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL X1C.json index e96641af54..985aca2147 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 95A @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 95A @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA TPU 95A @BBL X1C", "inherits": "BETA TPU 95A @base", "from": "system", - "setting_id": "BTUB02", + "setting_id": "ngJL0G4zca0UcpwY", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL A1.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL A1.json index 2813ecc893..9ff26d32d3 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA TPU 98A @BBL A1", "inherits": "BETA TPU 98A @base", "from": "system", - "setting_id": "BTUB03_01", + "setting_id": "uSuXXdSY9wCappR9", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL A1M.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL A1M.json index baf4f84328..8506e28d8b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA TPU 98A @BBL A1M", "inherits": "BETA TPU 98A @base", "from": "system", - "setting_id": "BTUB03_00", + "setting_id": "KZXiOO0bAUvrntok", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL H2D.json index bf342fadc9..ab3c0989cb 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA TPU 98A @BBL H2D", "inherits": "BETA TPU 98A @base", "from": "system", - "setting_id": "BTUB03_03", + "setting_id": "p0qjTRymaVctbU11", "instantiation": "true", "additional_cooling_fan_speed": [ "100" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL P1P.json index 419eb5b7c6..7ccae380cd 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA TPU 98A @BBL P1P", "inherits": "BETA TPU 98A @base", "from": "system", - "setting_id": "BTUB03_10", + "setting_id": "dHuSF6XjQORHCc8n", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL X1C.json index 8df9a59fe2..c455de9c8d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU 98A @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU 98A @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA TPU 98A @BBL X1C", "inherits": "BETA TPU 98A @base", "from": "system", - "setting_id": "BTUB03", + "setting_id": "jl1vNhZRhicI78UU", "instantiation": "true", "filament_max_volumetric_speed": [ "3.6", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL A1.json similarity index 93% rename from resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL A1.json index 427e618aec..730b3e1419 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL A1.json @@ -3,7 +3,7 @@ "name": "BETA TPU Matte @BBL A1", "inherits": "BETA TPU Matte @base", "from": "system", - "setting_id": "BTUB01_04", + "setting_id": "lnP769IP2TuLf36V", "instantiation": "true", "filament_density": [ "1.22" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL A1M.json index 0ce2e0f9f3..df0f14e67f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL A1M.json @@ -3,7 +3,7 @@ "name": "BETA TPU Matte @BBL A1M", "inherits": "BETA TPU Matte @base", "from": "system", - "setting_id": "BTUB01_05", + "setting_id": "wjYECCkIeDnUZfqL", "instantiation": "true", "filament_density": [ "1.22" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL H2D.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL H2D.json index 10193d7d5a..a1571446ab 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL H2D.json @@ -3,7 +3,7 @@ "name": "BETA TPU Matte @BBL H2D", "inherits": "BETA TPU Matte @base", "from": "system", - "setting_id": "BTUB01_02", + "setting_id": "PeJPI88l3Ui7jZnj", "instantiation": "true", "additional_cooling_fan_speed": [ "100" diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL P1P.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL P1P.json index c5648fb898..a058c9b86d 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL P1P.json @@ -3,7 +3,7 @@ "name": "BETA TPU Matte @BBL P1P", "inherits": "BETA TPU Matte @base", "from": "system", - "setting_id": "BTUB01_01", + "setting_id": "yyZ2UYGXe34MM1VO", "instantiation": "true", "filament_max_volumetric_speed": [ "2.8", diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL X1C.json similarity index 98% rename from resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL X1C.json index 046660b063..af019a9c89 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BBL/BETA TPU Matte @BBL X1C.json @@ -3,7 +3,7 @@ "name": "BETA TPU Matte @BBL X1C", "inherits": "BETA TPU Matte @base", "from": "system", - "setting_id": "BTUB01_00", + "setting_id": "LmABGlfUSMLmezJw", "instantiation": "true", "filament_max_volumetric_speed": [ "2.8", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA ABS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA ABS @base.json new file mode 100644 index 0000000000..848f3eacfc --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA ABS @base.json @@ -0,0 +1,93 @@ +{ + "type": "filament", + "name": "BETA ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFjUXn67", + "instantiation": "false", + "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "filament_cost": [ + "24.99" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "BETA" + ], + "impact_strength_z": [ + "7.4" + ], + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "filament_max_volumetric_speed": [ + "28.6" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "270" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "200" + ], + "filament_dev_ams_drying_time": [ + "12", + "8.0", + "12", + "8.0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "90" + ], + "filament_dev_drying_cooling_temperature": [ + "75" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_drying_softening_temperature": [ + "80" + ] +} diff --git a/resources/profiles/BBL/filament/BETA/BETA ASA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA ASA @base.json similarity index 52% rename from resources/profiles/BBL/filament/BETA/BETA ASA @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA ASA @base.json index a525f16bb1..38e260bf89 100644 --- a/resources/profiles/BBL/filament/BETA/BETA ASA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA ASA @base.json @@ -53,5 +53,53 @@ ], "textured_plate_temp_initial_layer": [ "100" + ], + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "200" + ], + "filament_dev_ams_drying_time": [ + "12", + "8.0", + "12", + "8.0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "100" + ], + "filament_dev_drying_cooling_temperature": [ + "85" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "80" + ], + "filament_dev_drying_softening_temperature": [ + "85" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA HIPS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA HIPS @base.json new file mode 100644 index 0000000000..1a228ea989 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA HIPS @base.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "BETA HIPS @base", + "inherits": "fdm_filament_hips", + "from": "system", + "filament_id": "OFlmxlDG", + "instantiation": "false", + "filament_is_support": [ + "1" + ], + "filament_vendor": [ + "BETA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "798" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "90" + ], + "filament_dev_drying_cooling_temperature": [ + "75" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_drying_softening_temperature": [ + "80" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PAHT-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PAHT-CF @base.json new file mode 100644 index 0000000000..a0df70918d --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PAHT-CF @base.json @@ -0,0 +1,102 @@ +{ + "type": "filament", + "name": "BETA PAHT-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OF6qw3Wb", + "instantiation": "false", + "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "94.99" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "BETA" + ], + "full_fan_speed_layer": [ + "2" + ], + "impact_strength_z": [ + "13.3" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "temperature_vitrification": [ + "180" + ], + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "400" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "165" + ], + "filament_dev_drying_cooling_temperature": [ + "150" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_drying_softening_temperature": [ + "150" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PEBA 90A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PEBA 90A @base.json new file mode 100644 index 0000000000..62a0db7d3c --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PEBA 90A @base.json @@ -0,0 +1,75 @@ +{ + "type": "filament", + "name": "BETA PEBA 90A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFI2MKy7", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "59.99" + ], + "filament_max_volumetric_speed": [ + "2.8" + ], + "filament_vendor": [ + "BETA" + ], + "impact_strength_z": [ + "87.3" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "slow_down_layer_time": [ + "14" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "600" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_dev_chamber_drying_time": [ + "16" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "40" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG @base.json index 07a25f9233..9acad81c21 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Fluorescence @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Fluorescence @base.json index b79699b9fc..963100be12 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Fluorescence @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Fluorescence @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Glitter @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glitter @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Glitter @base.json index c6b7b96de5..0137072894 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glitter @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Glitter @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Glow @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Glow @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Glow @base.json index 30c8cc2783..2765d13a52 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Glow @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Glow @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Gradient @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Gradient @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Gradient @base.json index cff77a0d6c..4e30a572bc 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Gradient @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Gradient @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG HF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG HF @base.json similarity index 69% rename from resources/profiles/BBL/filament/BETA/BETA PETG HF @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG HF @base.json index b7aa43b6b5..233a35897a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG HF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG HF @base.json @@ -85,5 +85,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Heat Color Change @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Heat Color Change @base.json index 254cf9e4c1..bae2307535 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Heat Color Change @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Heat Color Change @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Marble @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Marble @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Marble @base.json index 335a3f59b2..a8c63f5eec 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Marble @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Marble @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Matte @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Matte @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Matte @base.json index 52a838f323..4b26213bc7 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Matte @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Matte @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Metallic @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG Metallic @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Metallic @base.json index 9c276bcf4d..fad379b99b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Metallic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Metallic @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Transparent @base.json similarity index 70% rename from resources/profiles/BBL/filament/BETA/BETA PETG Transparent @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Transparent @base.json index 781d69af3a..63278e852e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG Transparent @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG Transparent @base.json @@ -80,5 +80,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG UV Color Change @base.json similarity index 72% rename from resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG UV Color Change @base.json index 42fa3bd62b..524c425437 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG UV Color Change @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG UV Color Change @base.json @@ -92,5 +92,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG-CF @base.json similarity index 68% rename from resources/profiles/BBL/filament/BETA/BETA PETG-CF @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG-CF @base.json index 8e3514f0ad..cde1782bbd 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG-CF @base.json @@ -79,5 +79,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG-GF @base.json similarity index 68% rename from resources/profiles/BBL/filament/BETA/BETA PETG-GF @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG-GF @base.json index d530f7a1d7..39dc650e7a 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PETG-GF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PETG-GF @base.json @@ -79,5 +79,48 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Basic @base.json similarity index 61% rename from resources/profiles/BBL/filament/BETA/BETA PLA Basic @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Basic @base.json index 429ecceda1..58375bd9c2 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Basic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Basic @base.json @@ -44,5 +44,51 @@ "compatible_printers": [], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Chameleon @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Chameleon @base.json index 5054237514..c26be0fa57 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Chameleon @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Chameleon @base.json @@ -22,5 +22,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Fluorescence @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Fluorescence @base.json index d9198287aa..0e928aaf25 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Fluorescence @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Fluorescence @base.json @@ -22,5 +22,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Glitter @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glitter @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Glitter @base.json index 545a34dd92..4cfe7043d4 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glitter @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Glitter @base.json @@ -22,5 +22,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Glow @base.json similarity index 56% rename from resources/profiles/BBL/filament/BETA/BETA PLA Glow @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Glow @base.json index 6be0a9da33..4381b12aab 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Glow @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Glow @base.json @@ -28,5 +28,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Gradient @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PLA Gradient @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Gradient @base.json index 9609ff08d3..b5cad1fec6 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Gradient @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Gradient @base.json @@ -22,5 +22,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Heat Color Change @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Heat Color Change @base.json index 958b999d91..4d60266708 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Heat Color Change @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Heat Color Change @base.json @@ -22,5 +22,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA High Speed @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA High Speed @base.json new file mode 100644 index 0000000000..39ec3bd0d1 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA High Speed @base.json @@ -0,0 +1,69 @@ +{ + "type": "filament", + "name": "BETA PLA High Speed @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OF3PDEw3", + "instantiation": "false", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "slow_down_layer_time": [ + "8" + ], + "filament_vendor": [ + "BETA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA High Temp @base.json similarity index 62% rename from resources/profiles/BBL/filament/BETA/BETA PLA High Temp @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA High Temp @base.json index d900b28794..539f71ed33 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA High Temp @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA High Temp @base.json @@ -35,5 +35,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Marble @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PLA Marble @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Marble @base.json index a472446d9a..4c1016d11f 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Marble @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Marble @base.json @@ -22,5 +22,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Matte @base.json similarity index 58% rename from resources/profiles/BBL/filament/BETA/BETA PLA Matte @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Matte @base.json index 32bd79b43b..74e742ddf9 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Matte @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Matte @base.json @@ -34,5 +34,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Metal @base.json similarity index 59% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metal @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Metal @base.json index 607e20fa4e..e2c18cb190 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metal @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Metal @base.json @@ -26,5 +26,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Metallic @base.json similarity index 59% rename from resources/profiles/BBL/filament/BETA/BETA PLA Metallic @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Metallic @base.json index c03bc0a8c7..0ca2cdde44 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Metallic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Metallic @base.json @@ -26,5 +26,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA PRO @base.json similarity index 61% rename from resources/profiles/BBL/filament/BETA/BETA PLA PRO @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA PRO @base.json index 6938382062..af4fc215f1 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA PRO @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA PRO @base.json @@ -44,5 +44,51 @@ "compatible_printers": [], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Silk @base.json similarity index 63% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Silk @base.json index a0c61acd51..c343d78794 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Silk @base.json @@ -41,5 +41,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Silk+ @base.json similarity index 62% rename from resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Silk+ @base.json index 0bedc9186a..45485dfd0b 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Silk+ @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Silk+ @base.json @@ -35,5 +35,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Transparent @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PLA Transparent @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Transparent @base.json index be62c10734..12a3538c6e 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Transparent @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Transparent @base.json @@ -22,5 +22,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA UV Color Change @base.json similarity index 57% rename from resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA UV Color Change @base.json index d95a0d8411..dbb8a8d0c4 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA UV Color Change @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA UV Color Change @base.json @@ -28,5 +28,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Wood @base.json similarity index 59% rename from resources/profiles/BBL/filament/BETA/BETA PLA Wood @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Wood @base.json index c5eeae9995..fb2b544375 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Wood @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Wood @base.json @@ -34,5 +34,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\nM142 P1 R35 S40\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Youth @base.json similarity index 58% rename from resources/profiles/BBL/filament/BETA/BETA PLA Youth @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Youth @base.json index 5fa118d566..dbc749d229 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA Youth @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA Youth @base.json @@ -34,5 +34,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA-CF @base.json similarity index 63% rename from resources/profiles/BBL/filament/BETA/BETA PLA-CF @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA-CF @base.json index f0f632adfa..08c441b7ac 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PLA-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA PLA-CF @base.json @@ -52,5 +52,51 @@ ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 90A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 90A @base.json new file mode 100644 index 0000000000..106ef8b7f6 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 90A @base.json @@ -0,0 +1,75 @@ +{ + "type": "filament", + "name": "BETA TPU 90A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OF6Yn69v", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "59.99" + ], + "filament_max_volumetric_speed": [ + "2.8" + ], + "filament_vendor": [ + "BETA" + ], + "impact_strength_z": [ + "87.3" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "slow_down_layer_time": [ + "14" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "600" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_dev_chamber_drying_time": [ + "16" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "40" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 95A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 95A @base.json new file mode 100644 index 0000000000..912d748d4c --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 95A @base.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "BETA TPU 95A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFK7830e", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_vendor": [ + "BETA" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "600" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_dev_chamber_drying_time": [ + "16" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "40" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 98A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 98A @base.json new file mode 100644 index 0000000000..13192a41f0 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU 98A @base.json @@ -0,0 +1,72 @@ +{ + "type": "filament", + "name": "BETA TPU 98A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFzaq7Yg", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "41.99" + ], + "filament_density": [ + "1.22" + ], + "filament_vendor": [ + "BETA" + ], + "impact_strength_z": [ + "88.7" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "600" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_dev_chamber_drying_time": [ + "16" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "40" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU Matte @base.json new file mode 100644 index 0000000000..4b27f0abf7 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/BETA/BETA TPU Matte @base.json @@ -0,0 +1,75 @@ +{ + "type": "filament", + "name": "BETA TPU Matte @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OF4QZANi", + "instantiation": "false", + "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", + "filament_cost": [ + "59.99" + ], + "filament_max_volumetric_speed": [ + "2.8" + ], + "filament_vendor": [ + "BETA" + ], + "impact_strength_z": [ + "87.3" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_initial_layer": [ + "225" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "slow_down_layer_time": [ + "14" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "600" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_dev_chamber_drying_time": [ + "16" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "40" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json index 30b5938bd1..9a66aa85db 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @System.json @@ -9,12 +9,27 @@ "60" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_max_volumetric_speed": [ - "16" + "12", + "20", + "25", + "12", + "18", + "18" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "slow_down_layer_time": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json index 62c2f3bc84..9005778d8f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS @base.json @@ -7,9 +7,22 @@ "instantiation": "false", "description": "When printing this filament, there's a risk of warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", "filament_cost": [ - "24.99" + "15.99" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", "0.95" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json index 2a0c04401e..9c3b25c7f4 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @System.json @@ -6,9 +6,19 @@ "setting_id": "mxgv6vFKgwBAF1Gw", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json index 5cdd145c56..368f6415e0 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ABS-GF @base.json @@ -13,15 +13,33 @@ "30" ], "filament_cost": [ - "29.99" + "26.99" ], "filament_density": [ "1.08" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", "0.95" ], "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", "12" ], "filament_type": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json index d94e4e4d83..0706ff5cc5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @System.json @@ -9,9 +9,19 @@ "25" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json index 432f106879..b848dda3a7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA @base.json @@ -16,16 +16,34 @@ "35" ], "filament_cost": [ - "31.99" + "26.99" ], "filament_density": [ "1.05" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", "0.95" ], "filament_max_volumetric_speed": [ - "12" + "12", + "20", + "25", + "12", + "20", + "20" ], "filament_vendor": [ "Bambu Lab" @@ -37,9 +55,19 @@ "100" ], "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", "270" ], "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", "270" ], "slow_down_layer_time": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json index 8343f4f8cb..0b020ea032 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-Aero @base.json @@ -16,18 +16,41 @@ "30" ], "filament_cost": [ - "49.99" + "46.99" ], "filament_density": [ "0.99" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.52", + "0.52", + "0.52", + "0.52", + "0.52", "0.52" ], "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", "12" ], "filament_retraction_length": [ + "1.5", + "1.5", + "1.5", + "1.5", + "1.5", "1.5" ], "filament_type": [ @@ -37,15 +60,35 @@ "Bambu Lab" ], "filament_wipe_distance": [ + "5", + "5", + "5", + "5", + "5", "5" ], "filament_z_hop_types": [ + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift", + "Normal Lift", "Normal Lift" ], "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", "270" ], "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", "270" ], "overhang_fan_speed": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json index 66abe8195a..96a8350b01 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu ASA-CF @base.json @@ -15,15 +15,33 @@ "25" ], "filament_cost": [ - "36.99" + "33.99" ], "filament_density": [ "1.02" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.9", + "0.9", + "0.9", + "0.9", + "0.9", "0.9" ], "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", "12" ], "filament_type": [ @@ -39,9 +57,19 @@ "100" ], "nozzle_temperature": [ + "275", + "275", + "275", + "275", + "275", "275" ], "nozzle_temperature_initial_layer": [ + "275", + "275", + "275", + "275", + "275", "275" ], "nozzle_temperature_range_low": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json index cadf540846..a37d362c30 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @System.json @@ -6,9 +6,19 @@ "setting_id": "XTve0TGrHzrMdBnZ", "instantiation": "true", "nozzle_temperature_initial_layer": [ + "290", + "290", + "290", + "290", + "290", "290" ], "nozzle_temperature": [ + "290", + "290", + "290", + "290", + "290", "290" ], "fan_max_speed": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json index 00df3d58ef..f42452c512 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA-CF @base.json @@ -12,7 +12,20 @@ "filament_density": [ "1.09" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", "0.96" ], "filament_type": [ @@ -21,12 +34,6 @@ "filament_vendor": [ "Bambu Lab" ], - "nozzle_temperature": [ - "280" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], "overhang_fan_speed": [ "40" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json index 578e30294c..304890617d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-CF @base.json @@ -16,12 +16,25 @@ "10" ], "filament_cost": [ - "79.99" + "76.99" ], "filament_density": [ "1.10" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", "0.96" ], "filament_type": [ @@ -31,9 +44,19 @@ "Bambu Lab" ], "nozzle_temperature": [ + "275", + "275", + "275", + "275", + "275", "275" ], "nozzle_temperature_initial_layer": [ + "275", + "275", + "275", + "275", + "275", "275" ], "overhang_fan_speed": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json index 337bcfae2c..9180402eaa 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @System.json @@ -9,12 +9,27 @@ "60" ], "filament_max_volumetric_speed": [ + "8", + "10.5", + "10.5", + "8", + "10.5", "10.5" ], "nozzle_temperature": [ + "265", + "265", + "265", + "265", + "265", "265" ], "nozzle_temperature_initial_layer": [ + "265", + "265", + "265", + "265", + "265", "265" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json index c9eb830cad..09a6d7ca59 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PA6-GF @base.json @@ -6,6 +6,9 @@ "filament_id": "OFNk8bxk", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "additional_fan_full_speed_layer": [ + "2" + ], "fan_cooling_layer_time": [ "5" ], @@ -16,12 +19,25 @@ "10" ], "filament_cost": [ - "59.99" + "56.99" ], "filament_density": [ "1.14" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", "0.96" ], "filament_type": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json index a028b7f7dc..d30f0be200 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PAHT-CF @base.json @@ -6,6 +6,9 @@ "filament_id": "OF2VFe4J", "instantiation": "false", "description": "When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials.", + "additional_fan_full_speed_layer": [ + "2" + ], "fan_cooling_layer_time": [ "5" ], @@ -16,12 +19,25 @@ "10" ], "filament_cost": [ - "94.99" + "91.99" ], "filament_density": [ "1.06" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.96", + "0.96", + "0.96", + "0.96", + "0.96", "0.96" ], "filament_type": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json index 2de9e190d2..cf5cc74a10 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @System.json @@ -11,5 +11,13 @@ "slow_down_layer_time": [ "12" ], - "compatible_printers": [] + "compatible_printers": [], + "filament_max_volumetric_speed": [ + "12", + "12", + "30", + "12", + "12", + "20" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json index 5ce775f0d0..56f22a6f3f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC @base.json @@ -5,13 +5,29 @@ "from": "system", "filament_id": "OFKhMPeX", "instantiation": "false", + "filament_cost": [ + "36.99" + ], + "filament_density": [ + "1.185" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_vendor": [ "Bambu Lab" ], - "filament_cost": [ - "39.99" - ], "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", "0.94" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json index 18c02b41a1..7afe6f6ed6 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PC FR @base.json @@ -6,12 +6,25 @@ "filament_id": "OFg57Nmc", "instantiation": "false", "filament_cost": [ - "0" + "51.99" ], "filament_density": [ "1.19" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.94", + "0.94", + "0.94", + "0.94", + "0.94", "0.94" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json index fe22a52a0a..84673cb64b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PET-CF @base.json @@ -28,12 +28,25 @@ "10" ], "filament_cost": [ - "84.99" + "81.99" ], "filament_density": [ "1.29" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_max_volumetric_speed": [ + "8", + "8", + "8", + "8", + "8", "8" ], "filament_multitool_ramming_flow": [ @@ -52,9 +65,19 @@ "100" ], "nozzle_temperature": [ + "270", + "270", + "270", + "270", + "270", "270" ], "nozzle_temperature_initial_layer": [ + "270", + "270", + "270", + "270", + "270", "270" ], "nozzle_temperature_range_high": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json index 0eb5c7c460..9a73056129 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @System.json @@ -6,12 +6,27 @@ "setting_id": "CCfgYCmjECjEC2ZS", "instantiation": "true", "filament_max_volumetric_speed": [ - "13" + "10", + "18", + "21", + "10", + "15", + "15" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json index 117416a251..086af82c6a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Basic @base.json @@ -28,16 +28,26 @@ "10" ], "filament_cost": [ - "24.99" + "13.99" ], "filament_density": [ "1.25" ], - "filament_flow_ratio": [ - "0.95" + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], - "filament_max_volumetric_speed": [ - "8" + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" ], "filament_multitool_ramming_flow": [ "8" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json index ac9a5c3db0..453ccc6400 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @System.json @@ -12,10 +12,20 @@ "20" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ - "18" + "18", + "10", + "10", + "18", + "10", + "10" ], "overhang_fan_speed": [ "100" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json index ef4a817974..323b8bcae6 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG HF @base.json @@ -27,16 +27,34 @@ "10" ], "filament_cost": [ - "24.99" + "15.99" ], "filament_density": [ "1.28" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ - "0.95" + "0.95", + "0.952", + "0.952", + "0.95", + "0.952", + "0.952" ], "filament_max_volumetric_speed": [ - "12" + "12", + "26", + "30", + "12", + "21", + "21" ], "filament_vendor": [ "Bambu Lab" @@ -48,9 +66,19 @@ "70" ], "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", "245" ], "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", "230" ], "nozzle_temperature_range_high": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Matte @System.json new file mode 100644 index 0000000000..04597dba2f --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Matte @System.json @@ -0,0 +1,49 @@ +{ + "type": "filament", + "name": "Bambu PETG Matte @System", + "inherits": "Bambu PETG Matte @base", + "from": "system", + "setting_id": "iFrbXE36ZPfvbGeb", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "10", + "15", + "21", + "10", + "15", + "15" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "nozzle_temperature": [ + "250", + "250", + "250", + "250", + "250", + "250" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Matte @base.json similarity index 57% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Matte @base.json index fe8eca06cb..7d6b8a692e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Matte @base.json @@ -1,16 +1,11 @@ { "type": "filament", - "name": "Fiberon PETG-rCF08 @base", + "name": "Bambu PETG Matte @base", "inherits": "fdm_filament_pet", "from": "system", - "filament_id": "OFw4WD4T", + "filament_id": "OFdyfQvU", "instantiation": "false", - "bed_type": [ - "Cool Plate" - ], - "close_fan_the_first_x_layers": [ - "3" - ], + "description": "To get better transparent or translucent results with the corresponding filament, please refer to this wiki: Printing tips for transparent PETG.", "cool_plate_temp": [ "0" ], @@ -24,34 +19,38 @@ "70" ], "fan_cooling_layer_time": [ - "12" + "30" ], "fan_max_speed": [ - "80" + "40" ], "fan_min_speed": [ - "0" + "10" ], "filament_cost": [ - "39.99" + "13.99" ], "filament_density": [ - "1.3" + "1.25" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PETG-CF" + "0.95", + "0.97", + "0.97", + "0.95", + "0.97", + "0.97" ], "filament_vendor": [ - "Polymaker" - ], - "full_fan_speed_layer": [ - "0" + "Bambu Lab" ], "hot_plate_temp": [ "70" @@ -59,38 +58,20 @@ "hot_plate_temp_initial_layer": [ "70" ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], "nozzle_temperature_range_high": [ "270" ], "nozzle_temperature_range_low": [ - "240" + "230" ], "overhang_fan_speed": [ - "70" + "90" ], "overhang_fan_threshold": [ - "95%" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "slow_down_for_layer_cooling": [ - "1" + "10%" ], "slow_down_layer_time": [ - "2" - ], - "slow_down_min_speed": [ - "20" - ], - "temperature_vitrification": [ - "69.7" + "12" ], "textured_plate_temp": [ "70" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json index 990343ec8e..58b7b615fa 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @System.json @@ -6,12 +6,27 @@ "setting_id": "qUW9pYQ6aYUpMb2I", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "filament_retraction_length": [ + "0.3", + "0.3", + "0.3", + "0.3", + "0.3", "0.3" ], "slow_down_layer_time": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json index 09efd2d8b5..555b2417a5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG Translucent @base.json @@ -28,15 +28,33 @@ "10" ], "filament_cost": [ - "24.99" + "15.99" ], "filament_density": [ "1.25" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", "0.95" ], "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", "6" ], "filament_multitool_ramming_flow": [ @@ -52,9 +70,19 @@ "70" ], "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", "245" ], "nozzle_temperature_initial_layer": [ + "250", + "250", + "250", + "250", + "250", "250" ], "nozzle_temperature_range_high": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json index 2474c3c9da..28ae43ae59 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @System.json @@ -15,12 +15,27 @@ "5" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5", + "11.5", + "11.5", "11.5" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "overhang_fan_speed": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json index 89fe7b3dde..ffbae062ae 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PETG-CF @base.json @@ -24,16 +24,26 @@ "0" ], "filament_cost": [ - "34.99" + "31.99" ], "filament_density": [ "1.25" ], - "filament_flow_ratio": [ - "0.95" + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], - "filament_max_volumetric_speed": [ - "12" + "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", + "0.95" ], "filament_type": [ "PETG-CF" @@ -65,9 +75,6 @@ "slow_down_layer_time": [ "6" ], - "temperature_vitrification": [ - "70" - ], "textured_plate_temp": [ "70" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json index 1fb04ff6a9..5baa67a318 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Aero @base.json @@ -10,15 +10,33 @@ "30" ], "filament_cost": [ - "44.99" + "41.99" ], "filament_density": [ "1.21" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.6", + "0.6", + "0.6", + "0.6", + "0.6", "0.6" ], "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", "6" ], "filament_multitool_ramming_flow": [ @@ -30,9 +48,6 @@ "filament_vendor": [ "Bambu Lab" ], - "filament_scarf_seam_type": [ - "none" - ], "nozzle_temperature_range_low": [ "210" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json index 04ae179bcc..3e267d9444 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @System.json @@ -6,12 +6,27 @@ "setting_id": "zkc85XTKi4cb6cOw", "instantiation": "true", "filament_max_volumetric_speed": [ - "21" + "12", + "21", + "40", + "12", + "21", + "30" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json index d5614af65f..96bf0e01d8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Basic @base.json @@ -6,30 +6,31 @@ "filament_id": "OFoiVqVM", "instantiation": "false", "filament_cost": [ - "24.99" + "15.99" ], "filament_density": [ "1.26" ], - "filament_flow_ratio": [ - "0.98" + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], - "filament_max_volumetric_speed": [ - "12" + "filament_flow_ratio": [ + "0.98", + "0.985", + "0.985", + "0.98", + "0.985", + "0.985" ], "filament_vendor": [ "Bambu Lab" ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "10%" - ], "filament_scarf_gap": [ "0%" - ], - "filament_scarf_length": [ - "10" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json index 15adc3e70f..51190b04ab 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @System.json @@ -6,9 +6,19 @@ "setting_id": "NZkeYlElza4KiVEo", "instantiation": "true", "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "12", + "21", + "21", + "12", + "21", "21" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json index 7b1290817d..544235249e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Dynamic @base.json @@ -11,6 +11,14 @@ "filament_density": [ "1.26" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_vendor": [ "Bambu Lab" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json index 69dc00e4e1..7b9c100352 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @System.json @@ -6,9 +6,19 @@ "setting_id": "O21mHwtRSSE6HEfS", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json index 3ecc707ddf..09086beec7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Galaxy @base.json @@ -6,15 +6,33 @@ "filament_id": "OFQ3e56w", "instantiation": "false", "filament_cost": [ - "29.99" + "21.99" ], "filament_density": [ "1.19" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", "12" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json index 62b7248f32..6924441f5d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @System.json @@ -6,9 +6,19 @@ "setting_id": "BiwTTWJCMV2qcaF1", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json index 8395082e6d..50ed9ba8fd 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Glow @base.json @@ -6,21 +6,39 @@ "filament_id": "OFEkPBwx", "instantiation": "false", "filament_cost": [ - "29.99" + "21.99" ], "filament_density": [ "1.26" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", "12" ], "filament_vendor": [ "Bambu Lab" ], - "temperature_vitrification": [ - "45" + "required_nozzle_HRC": [ + "40" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json index 342d7667f8..7a1c0c90b5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @System.json @@ -6,7 +6,12 @@ "setting_id": "1qdr65SvIErZzxN3", "instantiation": "true", "filament_max_volumetric_speed": [ - "23.2" + "12", + "21", + "21", + "12", + "21", + "21" ], "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json index 1ff6cb84cc..33cfe9bbf6 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Impact @base.json @@ -8,7 +8,20 @@ "filament_cost": [ "25.4" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", "0.95" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Lite @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Lite @System.json new file mode 100644 index 0000000000..bd4b09654b --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Lite @System.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @System", + "inherits": "Bambu PLA Lite @base", + "from": "system", + "setting_id": "MmKkT3hRnIEeSeXm", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "nozzle_temperature": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "nozzle_temperature_initial_layer": [ + "220", + "220", + "220", + "220", + "220", + "220" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Lite @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Lite @base.json new file mode 100644 index 0000000000..81ccf320ed --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Lite @base.json @@ -0,0 +1,41 @@ +{ + "type": "filament", + "name": "Bambu PLA Lite @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFnfxTvi", + "instantiation": "false", + "filament_cost": [ + "18.99" + ], + "filament_density": [ + "1.40" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "21", + "40", + "12", + "16", + "16" + ], + "filament_vendor": [ + "Bambu Lab" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json index 0573904f7f..67b3b9273c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @System.json @@ -6,9 +6,19 @@ "setting_id": "oNGmbbdba2aULYwQ", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json index 0faa115520..74d40dde58 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Marble @base.json @@ -6,12 +6,25 @@ "filament_id": "OF9OlTWH", "instantiation": "false", "filament_cost": [ - "29.99" + "21.99" ], "filament_density": [ "1.22" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json index bb359354b1..eb3d72adff 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @System.json @@ -6,12 +6,27 @@ "setting_id": "POQTCsM5qwSXswgr", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_max_volumetric_speed": [ - "22" + "11", + "19.5", + "40", + "11", + "19.5", + "25" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json index ac7760f632..fa68a8c519 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Matte @base.json @@ -6,27 +6,34 @@ "filament_id": "OFXIbw5D", "instantiation": "false", "filament_cost": [ - "24.99" + "15.99" ], "filament_density": [ "1.32" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_vendor": [ "Bambu Lab" ], - "filament_scarf_seam_type": [ - "none" - ], "filament_scarf_height": [ "5%" ], "filament_scarf_gap": [ "0%" - ], - "filament_scarf_length": [ - "10" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json index 7a1a9661d8..c3616606cf 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @System.json @@ -6,6 +6,11 @@ "setting_id": "7w5T6uXXrwLzQb5D", "instantiation": "true", "filament_max_volumetric_speed": [ + "12", + "21", + "21", + "12", + "21", "21" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json index 81a9c95c24..3a319c357c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Metal @base.json @@ -7,18 +7,28 @@ "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ - "29.99" + "21.99" ], "filament_density": [ "1.25" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_vendor": [ "Bambu Lab" - ], - "filament_scarf_seam_type": [ - "none" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Pure @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Pure @System.json new file mode 100644 index 0000000000..e18d718039 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Pure @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @System", + "inherits": "Bambu PLA Pure @base", + "from": "system", + "setting_id": "MI6Z51sJkjOmlIl0", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Pure @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Pure @base.json new file mode 100644 index 0000000000..cc37c38cfa --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Pure @base.json @@ -0,0 +1,36 @@ +{ + "type": "filament", + "name": "Bambu PLA Pure @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFTHDCqA", + "instantiation": "false", + "filament_cost": [ + "16.99" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json index 8114f02586..8a3c41a981 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @System.json @@ -5,5 +5,13 @@ "from": "system", "setting_id": "urdS8L3VweWtD0bW", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5", + "7.5", + "7.5", + "7.5" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json index f76daf5b77..3010ab3b71 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk @base.json @@ -7,12 +7,25 @@ "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ - "29.99" + "21.99" ], "filament_density": [ "1.32" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_vendor": [ @@ -25,9 +38,19 @@ "0%" ], "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", "230" ], "supertack_plate_temp": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json index c58e4dbc95..97db4b7d66 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @System.json @@ -11,5 +11,13 @@ "supertack_plate_temp_initial_layer": [ "35" ], - "compatible_printers": [] + "compatible_printers": [], + "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5", + "7.5", + "7.5", + "7.5" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json index 93e6e81148..26fb14ac08 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Silk+ @base.json @@ -7,27 +7,47 @@ "instantiation": "false", "description": "To make the prints get higher gloss, please dry the filament before use, and set the outer wall speed to be 40 to 60 mm/s when slicing.", "filament_cost": [ - "29.99" + "15.99" ], "filament_density": [ "1.27" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ - "0.98" + "0.98", + "0.985", + "0.985", + "0.98", + "0.985", + "0.985" ], "filament_scarf_height": [ "5%" ], - "filament_scarf_seam_type": [ - "all" - ], "filament_vendor": [ "Bambu Lab" ], "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", "230" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json index 152b762069..e9ed1a15ca 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Sparkle @base.json @@ -6,12 +6,25 @@ "filament_id": "OFDxfPgH", "instantiation": "false", "filament_cost": [ - "29.99" + "21.99" ], "filament_density": [ "1.26" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json index 98ac23e383..206a921cea 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @System.json @@ -6,6 +6,11 @@ "setting_id": "ZxjDjF5XAaoeOobw", "instantiation": "true", "filament_max_volumetric_speed": [ + "12", + "21", + "21", + "12", + "21", "21" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json index a5aa15e8c1..dfa1936ab9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough @base.json @@ -11,7 +11,20 @@ "filament_density": [ "1.26" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_vendor": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough+ @System.json new file mode 100644 index 0000000000..191fc1baad --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough+ @System.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough+ @System", + "inherits": "Bambu PLA Tough+ @base", + "from": "system", + "setting_id": "5DfKHufhlLWJBqNG", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", + "1" + ], + "filament_max_volumetric_speed": [ + "12", + "18", + "18", + "12", + "18", + "18" + ], + "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough+ @base.json new file mode 100644 index 0000000000..efe3f7aea1 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Tough+ @base.json @@ -0,0 +1,67 @@ +{ + "type": "filament", + "name": "Bambu PLA Tough+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OF342jVN", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "80" + ], + "filament_change_length": [ + "5" + ], + "filament_cost": [ + "20.99" + ], + "filament_density": [ + "1.21" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_prime_volume": [ + "30" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245", + "245", + "245", + "245", + "245" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Translucent @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Translucent @System.json new file mode 100644 index 0000000000..1db5196607 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Translucent @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @System", + "inherits": "Bambu PLA Translucent @base", + "from": "system", + "setting_id": "M48unzzxHYxY9hUU", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Translucent @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Translucent @base.json new file mode 100644 index 0000000000..0cfa44ea55 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Translucent @base.json @@ -0,0 +1,36 @@ +{ + "type": "filament", + "name": "Bambu PLA Translucent @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFFbSnCD", + "instantiation": "false", + "filament_cost": [ + "15.99" + ], + "filament_density": [ + "1.22" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", + "0.98" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json index b9686af187..075d0f175d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA Wood @base.json @@ -6,26 +6,51 @@ "filament_id": "OFMjtqTC", "instantiation": "false", "filament_cost": [ - "24.99" + "21.99" ], "filament_density": [ "1.21" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", "12" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], - "filament_scarf_seam_type": [ - "none" - ], "filament_vendor": [ "Bambu Lab" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json index a677e25a26..e0a7db2a04 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @System.json @@ -6,18 +6,43 @@ "setting_id": "JKf6MqhbAM6NRWNY", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_max_volumetric_speed": [ + "12", + "15", + "15", + "12", + "15", "15" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", "230" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json index 7bd37d40a4..652b978391 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PLA-CF @base.json @@ -15,12 +15,25 @@ "45" ], "filament_cost": [ - "34.99" + "31.99" ], "filament_density": [ "1.22" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_type": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json index 4200478407..958e721fe9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @System.json @@ -5,5 +5,13 @@ "from": "system", "setting_id": "NEjBweIYKppi6T0Q", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5", + "6.5", + "6.5", + "6.5" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json index 8519203173..e25994ff90 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPA-CF @base.json @@ -5,6 +5,14 @@ "from": "system", "filament_id": "OF54B0S0", "instantiation": "false", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_vendor": [ "Bambu Lab" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json index b48f3b9300..8f6b42d96d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PPS-CF @base.json @@ -10,7 +10,7 @@ "30" ], "filament_cost": [ - "175" + "169.32" ], "filament_density": [ "1.26" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json index b0f82e6b71..ed4df6036f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @System.json @@ -6,9 +6,19 @@ "setting_id": "Eb9Y2xbVDpjuptrv", "instantiation": "true", "nozzle_temperature": [ + "240", + "240", + "240", + "240", + "240", "240" ], "nozzle_temperature_initial_layer": [ + "240", + "240", + "240", + "240", + "240", "240" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json index 1c6e0f2201..7d8917cf86 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu PVA @base.json @@ -7,13 +7,26 @@ "instantiation": "false", "description": "This is a water-soluble support filament, and usually it is only for the support structure and not for the model body. Printing this filament is of many requirements, and to get better printing quality, please refer to this wiki: PVA Printing Guide.", "filament_cost": [ - "79.98" + "73.98" ], "filament_density": [ "1.27" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_max_volumetric_speed": [ - "6" + "4", + "4", + "4", + "4", + "4", + "4" ], "filament_vendor": [ "Bambu Lab" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json index 7adbcb812d..6f15479b24 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PA PET @base.json @@ -15,6 +15,14 @@ "filament_density": [ "1.22" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_is_support": [ "1" ], @@ -22,9 +30,19 @@ "Bambu Lab" ], "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", "280" ], "nozzle_temperature_initial_layer": [ + "280", + "280", + "280", + "280", + "280", "280" ], "required_nozzle_HRC": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json index 9511f5c0cd..8dc7f82786 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA @base.json @@ -13,11 +13,19 @@ "40" ], "filament_cost": [ - "69.98" + "39.98" ], "filament_density": [ "1.30" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_is_support": [ "1" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json index 06af8de863..0e5d882c32 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @System.json @@ -12,9 +12,19 @@ "60" ], "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json index 63802d3794..42b946de62 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support For PLA-PETG @base.json @@ -21,10 +21,23 @@ "filament_density": [ "1.19" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_is_support": [ "1" ], "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", "6" ], "filament_multitool_ramming_flow": [ @@ -43,9 +56,19 @@ "60" ], "nozzle_temperature": [ + "210", + "210", + "210", + "210", + "210", "210" ], "nozzle_temperature_initial_layer": [ + "210", + "210", + "210", + "210", + "210", "210" ], "slow_down_layer_time": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json index 35cc03e9b8..148f1a6e1c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support G @base.json @@ -15,6 +15,14 @@ "filament_density": [ "1.22" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_is_support": [ "1" ], @@ -22,9 +30,19 @@ "Bambu Lab" ], "nozzle_temperature": [ + "280", + "280", + "280", + "280", + "280", "280" ], "nozzle_temperature_initial_layer": [ + "280", + "280", + "280", + "280", + "280", "280" ], "required_nozzle_HRC": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json index a922afd83e..5f8135bfdc 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support W @base.json @@ -18,6 +18,14 @@ "filament_density": [ "1.30" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_is_support": [ "1" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json index 3e998e0cc4..6e53555d93 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @System.json @@ -6,9 +6,19 @@ "setting_id": "5fy5QeiH5NyGq69r", "instantiation": "true", "filament_long_retractions_when_cut": [ + "1", + "1", + "1", + "1", + "1", "1" ], "filament_retraction_distances_when_cut": [ + "18", + "18", + "18", + "18", + "18", "18" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json index b844ac16c7..8f6c3d6996 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu Support for ABS @base.json @@ -10,15 +10,33 @@ "30" ], "filament_cost": [ - "29.98" + "23.98" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", "0.95" ], "filament_is_support": [ "1" ], "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", "6" ], "filament_multitool_ramming_flow": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 85A @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 85A @System.json new file mode 100644 index 0000000000..73ec0a348b --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 85A @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu TPU 85A @System", + "inherits": "Bambu TPU 85A @base", + "from": "system", + "setting_id": "rmOR0b5LEO1Db9Db", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 85A @base.json similarity index 54% rename from resources/profiles/BBL/filament/BETA/BETA PEBA 90A @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 85A @base.json index fe1d3cd5b6..e8acb25e51 100644 --- a/resources/profiles/BBL/filament/BETA/BETA PEBA 90A @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 85A @base.json @@ -1,33 +1,56 @@ { "type": "filament", - "name": "BETA PEBA 90A @base", + "name": "Bambu TPU 85A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "OFI2MKy7", + "filament_id": "OFlfuj2k", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ - "59.99" + "41.99" + ], + "filament_density": [ + "1.18" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], "filament_max_volumetric_speed": [ - "2.8" + "2.2", + "2.2", + "2.2", + "2.2", + "2.2", + "2.2" ], "filament_vendor": [ - "BETA" - ], - "impact_strength_z": [ - "87.3" + "Bambu Lab" ], "nozzle_temperature": [ + "225", + "225", + "225", + "225", + "225", "225" ], "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225", + "225", "225" ], "nozzle_temperature_range_high": [ "240" ], "slow_down_layer_time": [ - "14" + "20" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 90A @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 90A @System.json new file mode 100644 index 0000000000..55631055a2 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 90A @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu TPU 90A @System", + "inherits": "Bambu TPU 90A @base", + "from": "system", + "setting_id": "YCcBMzzb9pqPsesL", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 90A @base.json similarity index 58% rename from resources/profiles/BBL/filament/BETA/BETA TPU Matte @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 90A @base.json index 272e9be1ed..ace53ae601 100644 --- a/resources/profiles/BBL/filament/BETA/BETA TPU Matte @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 90A @base.json @@ -1,27 +1,47 @@ { "type": "filament", - "name": "BETA TPU Matte @base", + "name": "Bambu TPU 90A @base", "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "OF4QZANi", + "filament_id": "OFtkLO6q", "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ - "59.99" + "38.99" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" ], "filament_max_volumetric_speed": [ + "2.8", + "2.8", + "2.8", + "2.8", + "2.8", "2.8" ], "filament_vendor": [ - "BETA" - ], - "impact_strength_z": [ - "87.3" + "Bambu Lab" ], "nozzle_temperature": [ + "225", + "225", + "225", + "225", + "225", "225" ], "nozzle_temperature_initial_layer": [ + "225", + "225", + "225", + "225", + "225", "225" ], "nozzle_temperature_range_high": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json index 5973e084b3..af343b5c5a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @System.json @@ -6,7 +6,12 @@ "setting_id": "LVi6dblW9n9rnSNJ", "instantiation": "true", "filament_max_volumetric_speed": [ - "3.6" + "3.2", + "3.2", + "3.2", + "3.2", + "3.2", + "3.2" ], "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json index 5b71c52f81..4cf5910c79 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A @base.json @@ -12,13 +12,31 @@ "filament_density": [ "1.22" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_vendor": [ "Bambu Lab" ], "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", "230" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json index 95263eb4ef..d89e277204 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU 95A HF @base.json @@ -7,24 +7,52 @@ "instantiation": "false", "description": "This filament is too soft and not compatible with the AMS. Printing it is of many requirements, and to get better printing quality, please refer to this wiki: TPU printing guide.", "filament_cost": [ - "41.99" + "38.99" ], "filament_density": [ "1.22" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_max_volumetric_speed": [ + "12", + "12", + "12", + "12", + "12", "12" ], "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", "0.8" ], "filament_vendor": [ "Bambu Lab" ], "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", "230" ], "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", "230" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU for AMS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU for AMS @System.json new file mode 100644 index 0000000000..2a366e7da5 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU for AMS @System.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @System", + "inherits": "Bambu TPU for AMS @base", + "from": "system", + "setting_id": "kYivBf7yRPZlOH2U", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU for AMS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU for AMS @base.json new file mode 100644 index 0000000000..dd8aada9db --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Bambu/Bambu TPU for AMS @base.json @@ -0,0 +1,106 @@ +{ + "type": "filament", + "name": "Bambu TPU for AMS @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFIBbYO5", + "instantiation": "false", + "description": "If you are to print a kind of soft TPU, please don't slice with this profile, and it is only for TPU that has high enough hardness (not less than 55D) and is compatible with the AMS. To get better printing quality, please refer to this wiki: TPU printing guide.", + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "50" + ], + "fan_min_speed": [ + "20" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.26" + ], + "filament_deretraction_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_flow_ratio": [ + "0.97", + "0.97", + "0.97", + "0.97", + "0.97", + "0.97" + ], + "filament_max_volumetric_speed": [ + "18", + "18", + "18", + "18", + "18", + "18" + ], + "filament_retraction_length": [ + "2", + "0.4", + "0.4", + "2", + "0.4", + "0.4" + ], + "filament_retraction_speed": [ + "10", + "10", + "10", + "10", + "10", + "10" + ], + "filament_type": [ + "TPU-AMS" + ], + "filament_vendor": [ + "Bambu Lab" + ], + "nozzle_temperature": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_initial_layer": [ + "230", + "230", + "230", + "230", + "230", + "230" + ], + "nozzle_temperature_range_high": [ + "240" + ], + "nozzle_temperature_range_low": [ + "220" + ], + "overhang_fan_threshold": [ + "25%" + ], + "slow_down_layer_time": [ + "10" + ] +} diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1 0.2 nozzle.json similarity index 90% rename from resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1 0.2 nozzle.json index 6622dad899..0ca53101a7 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX ABS @BBL X1 0.2 nozzle", "inherits": "COEX ABS @base", "from": "system", - "setting_id": "CXABSB01_02", + "setting_id": "RG1oJ6nUUar2xjeP", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1.json index 7b10388861..441ac96720 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX ABS @BBL X1", "inherits": "COEX ABS @base", "from": "system", - "setting_id": "CXABSB01_03", + "setting_id": "EYfQzF9Xb2lvPs9b", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1C 0.2 nozzle.json index 095cdc7364..905c4f009f 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX ABS @BBL X1C 0.2 nozzle", "inherits": "COEX ABS @base", "from": "system", - "setting_id": "CXABSB01_04", + "setting_id": "WBC8PkLBCiT1VnCz", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1C.json index f3b31bf01a..e5c818ddcd 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX ABS @BBL X1C", "inherits": "COEX ABS @base", "from": "system", - "setting_id": "CXABSB01_01", + "setting_id": "AwuhtCWlU5uzCk7j", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1 0.2 nozzle.json index 148aac0fe0..4c8947bc26 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX ABS PRIME @BBL X1 0.2 nozzle", "inherits": "COEX ABS PRIME @base", "from": "system", - "setting_id": "CXABPB09_02", + "setting_id": "nWGYzlOGc2WsoIdU", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1.json index f118e9e390..74f3595357 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX ABS PRIME @BBL X1", "inherits": "COEX ABS PRIME @base", "from": "system", - "setting_id": "CXABPB09_03", + "setting_id": "N5mryBHDklwUbPkx", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1C 0.2 nozzle.json index 6bfcf676fb..46363dcc07 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX ABS PRIME @BBL X1C 0.2 nozzle", "inherits": "COEX ABS PRIME @base", "from": "system", - "setting_id": "CXABPB09_04", + "setting_id": "xj7D5OzJSN6e8oJW", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1C.json index 45144ae3fe..7a18a3c848 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ABS PRIME @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ABS PRIME @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX ABS PRIME @BBL X1C", "inherits": "COEX ABS PRIME @base", "from": "system", - "setting_id": "CXABPB09_01", + "setting_id": "k9NyXpycDZJAnFLF", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1 0.2 nozzle.json index e690412a58..b1e0f04377 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX ASA PRIME @BBL X1 0.2 nozzle", "inherits": "COEX ASA PRIME @base", "from": "system", - "setting_id": "CXASAB04_01", + "setting_id": "tuxYV5K2a9arndZ0", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1.json index dcc177b1ed..a8e4357478 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX ASA PRIME @BBL X1", "inherits": "COEX ASA PRIME @base", "from": "system", - "setting_id": "CXASAB04_02", + "setting_id": "o8hJqPQWAuJXxwxd", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1C 0.2 nozzle.json index 7067bf1b1e..d084c99750 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX ASA PRIME @BBL X1C 0.2 nozzle", "inherits": "COEX ASA PRIME @base", "from": "system", - "setting_id": "CXASAB04_03", + "setting_id": "tjT134m6lHPjh5YH", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1C.json index 224a6279d6..70e90f269d 100644 --- a/resources/profiles/BBL/filament/COEX/COEX ASA PRIME @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX ASA PRIME @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX ASA PRIME @BBL X1C", "inherits": "COEX ASA PRIME @base", "from": "system", - "setting_id": "CXASAB04_04", + "setting_id": "fPFt2sY4junWyKad", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX NYLEX PA6-CF @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX NYLEX PA6-CF @BBL X1C.json similarity index 93% rename from resources/profiles/BBL/filament/COEX/COEX NYLEX PA6-CF @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX NYLEX PA6-CF @BBL X1C.json index d050a1f5a6..f3512373f5 100644 --- a/resources/profiles/BBL/filament/COEX/COEX NYLEX PA6-CF @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX NYLEX PA6-CF @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX NYLEX PA6-CF @BBL X1C", "inherits": "COEX NYLEX PA6-CF @base", "from": "system", - "setting_id": "CXPACB23_01", + "setting_id": "fI5xYLWT4SAU5igp", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1S 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX NYLEX UNFILLED @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX NYLEX UNFILLED @BBL X1C.json similarity index 95% rename from resources/profiles/BBL/filament/COEX/COEX NYLEX UNFILLED @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX NYLEX UNFILLED @BBL X1C.json index 082948c7ec..d59aa48ae6 100644 --- a/resources/profiles/BBL/filament/COEX/COEX NYLEX UNFILLED @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX NYLEX UNFILLED @BBL X1C.json @@ -4,7 +4,7 @@ "renamed_from": "COEX NYLEX UNFILLED @BBL X1C", "inherits": "COEX NYLEX UNFILLED @base", "from": "system", - "setting_id": "CXPAUB21_01", + "setting_id": "rN4kjoJDWnro8SAu", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.2 nozzle.json similarity index 89% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.2 nozzle.json index 2800d37b1c..5f4fcb6089 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL A1 0.2 nozzle", "inherits": "COEX PCTG PRIME @base", "from": "system", - "setting_id": "CXPCTX09", + "setting_id": "tuTktXuFMxhD5bdZ", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1 0.8 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.8 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1 0.8 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.8 nozzle.json index 441aa2cd9d..0b9bae9252 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1 0.8 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1 0.8 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL A1 0.8 nozzle", "inherits": "COEX PCTG PRIME @base", "from": "system", - "setting_id": "CXPCTX08", + "setting_id": "egEOiFlnbvmEKvNk", "instantiation": "true", "fan_max_speed": [ "60" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1.json similarity index 89% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1.json index c681c2e87e..102bcf8b74 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL A1", "inherits": "COEX PCTG PRIME @base", "from": "system", - "setting_id": "CXPCTX07", + "setting_id": "IveIh521d1zM1sbg", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json index b7cc4c4aa5..f93c4fbad6 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL A1M 0.2 nozzle", "inherits": "COEX PCTG PRIME @BBL X1C 0.2 nozzle", "from": "system", - "setting_id": "CXPCTX06", + "setting_id": "xDQWVr6jZyb8JU9q", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json index e84ab8f469..d7860ae235 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M 0.8 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL A1M 0.8 nozzle", "inherits": "COEX PCTG PRIME @BBL X1C 0.8 nozzle", "from": "system", - "setting_id": "CXPCTX05", + "setting_id": "Tf3V4GVy9idlbJWz", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M.json index 34370de8d3..c4f1bd6e88 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL A1M 0.4 nozzle", "inherits": "COEX PCTG PRIME @BBL X1C", "from": "system", - "setting_id": "CXPCTX04", + "setting_id": "6VkUjoEkwOlOuhXW", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json similarity index 93% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json index 55a4c8af53..a754286541 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL X1C 0.2 nozzle", "inherits": "COEX PCTG PRIME @base", "from": "system", - "setting_id": "CXPCTX03", + "setting_id": "OvCsASrQYGNbptJL", "instantiation": "true", "filament_max_volumetric_speed": [ "6" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json index 90fd488cd8..e861ff5845 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C 0.8 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL X1C 0.8 nozzle", "inherits": "COEX PCTG PRIME @base", "from": "system", - "setting_id": "CXPCTX02", + "setting_id": "m7SNC69mm4Mq16z2", "instantiation": "true", "fan_max_speed": [ "40" diff --git a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C.json similarity index 93% rename from resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C.json index 2a3f276d56..a55e5a7ffd 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PCTG PRIME @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PCTG PRIME @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX PCTG PRIME @BBL X1C", "inherits": "COEX PCTG PRIME @base", "from": "system", - "setting_id": "CXPCTX01", + "setting_id": "MGJHFaQHCW5nyY7g", "instantiation": "true", "filament_max_volumetric_speed": [ "14" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1 0.2 nozzle.json similarity index 89% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1 0.2 nozzle.json index e284f3cb97..756913dc00 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL A1 0.2 nozzle", "inherits": "COEX PETG @base", "from": "system", - "setting_id": "CXPETX09", + "setting_id": "eW0lME1PpSiCQ50o", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1 0.8 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1 0.8 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1 0.8 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1 0.8 nozzle.json index 1053447fff..1022e84e8e 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1 0.8 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1 0.8 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL A1 0.8 nozzle", "inherits": "COEX PETG @base", "from": "system", - "setting_id": "CXPETX08", + "setting_id": "b1N9FDhZ9LDZCXbr", "instantiation": "true", "fan_max_speed": [ "60" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1.json index ded2bf0454..3ff688a34f 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL A1", "inherits": "COEX PETG @base", "from": "system", - "setting_id": "CXPETX07", + "setting_id": "QdBlIRA64gjVhmdY", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M 0.2 nozzle.json index c403e2d70e..a3c1395672 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL A1M 0.2 nozzle", "inherits": "COEX PETG @BBL X1C 0.2 nozzle", "from": "system", - "setting_id": "CXPETX06", + "setting_id": "wzg15HcFnr57D3WG", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M 0.8 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M 0.8 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M 0.8 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M 0.8 nozzle.json index 300c25172f..adf18f203d 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M 0.8 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M 0.8 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL A1M 0.8 nozzle", "inherits": "COEX PETG @BBL X1C 0.8 nozzle", "from": "system", - "setting_id": "CXPETX05", + "setting_id": "QybtmiPJpTywWVRY", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M.json index 1b36cc42a3..f1f2305f34 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL A1M 0.4 nozzle", "inherits": "COEX PETG @BBL X1C", "from": "system", - "setting_id": "CXPETX04", + "setting_id": "OVVZwYafB1y5Mo0H", "instantiation": "true", "filament_flow_ratio": [ "0.94" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C 0.2 nozzle.json similarity index 93% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C 0.2 nozzle.json index ad9623ef99..d3a112550f 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL X1C 0.2 nozzle", "inherits": "COEX PETG @base", "from": "system", - "setting_id": "CXPETX03", + "setting_id": "okr5VvLy0gPTcU2m", "instantiation": "true", "filament_max_volumetric_speed": [ "6" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C 0.8 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C 0.8 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C 0.8 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C 0.8 nozzle.json index ebc5c1f82c..36e1ed91c6 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C 0.8 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C 0.8 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL X1C 0.8 nozzle", "inherits": "COEX PETG @base", "from": "system", - "setting_id": "CXPETX02", + "setting_id": "scNT4RccECXf88MU", "instantiation": "true", "fan_max_speed": [ "40" diff --git a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C.json similarity index 93% rename from resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C.json index b06f93d281..0163ecd21e 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PETG @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PETG @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX PETG @BBL X1C", "inherits": "COEX PETG @base", "from": "system", - "setting_id": "CXPETX01", + "setting_id": "sDI541ggJ5DoXcdP", "instantiation": "true", "filament_max_volumetric_speed": [ "14" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1 0.2 nozzle.json index 95408fd0bd..7faacef1bf 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL A1 0.2 nozzle", "inherits": "COEX PLA @base", "from": "system", - "setting_id": "CXPLAX09", + "setting_id": "VDPt22q9NQHPLwep", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1.json index 395ea8350b..8a266b1a1f 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL A1", "inherits": "COEX PLA @base", "from": "system", - "setting_id": "CXPLAX08", + "setting_id": "jFDQnqGZVHlRjjlK", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1M 0.2 nozzle.json similarity index 87% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1M 0.2 nozzle.json index 6fd31fe8e2..755cba92e0 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL A1M 0.2 nozzle", "inherits": "COEX PLA @BBL A1M", "from": "system", - "setting_id": "CXPLAX07", + "setting_id": "dbJukwYNClAE3Y4W", "instantiation": "true", "filament_max_volumetric_speed": [ "6" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1M.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1M.json index 8853919a29..d888cbb20b 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL A1M", "inherits": "COEX PLA @base", "from": "system", - "setting_id": "CXPLAX06", + "setting_id": "QkZVOGGnNC3U0A7m", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL P1P 0.2 nozzle.json similarity index 87% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL P1P 0.2 nozzle.json index 3b9362f347..5853e66179 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL P1P 0.2 nozzle", "inherits": "COEX PLA @BBL P1P", "from": "system", - "setting_id": "CXPLAX05", + "setting_id": "87nvDFQRevtSiubX", "instantiation": "true", "filament_max_volumetric_speed": [ "6" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL P1P.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL P1P.json index c39c501104..7407f01112 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL P1P.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL P1P", "inherits": "COEX PLA @base", "from": "system", - "setting_id": "CXPLAX04", + "setting_id": "Ja95cvzeSeqSAKsq", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1.json similarity index 88% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1.json index 2590b208c5..ded86a4938 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL X1", "inherits": "COEX PLA @base", "from": "system", - "setting_id": "CXPLAX03", + "setting_id": "5D7sxBEXD7eta7V3", "instantiation": "true", "slow_down_layer_time": [ "10" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1C 0.2 nozzle.json similarity index 90% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1C 0.2 nozzle.json index eb0684a05d..7b36a15acd 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL X1C 0.2 nozzle", "inherits": "COEX PLA @BBL X1C", "from": "system", - "setting_id": "CXPLAX02", + "setting_id": "BvByjahhcY0Moihz", "instantiation": "true", "filament_max_volumetric_speed": [ "1.6" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1C.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1C.json index e4fb5fcc4f..c6d08bdf3d 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX PLA @BBL X1C", "inherits": "COEX PLA @base", "from": "system", - "setting_id": "CXPLAX01", + "setting_id": "e4zp2O3cFAcbqoFi", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1 0.2 nozzle.json index 6028dcdd90..565f01f48c 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL A1 0.2 nozzle", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX10", + "setting_id": "Vys3UqyWFT69wMH6", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1.json index 8d18bccfd4..5c482f19fb 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL A1", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX09", + "setting_id": "g1yJbSmJv4RDWLUa", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1M 0.2 nozzle.json index 940966a5b3..5383c52bf0 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL A1M 0.2 nozzle", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX08", + "setting_id": "5mzTIa5FF81O5BDZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1M.json index e80f790fd9..81c5d63c2c 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL A1M", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX07", + "setting_id": "dhsmZHXKzMNn0FtL", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL P1P 0.2 nozzle.json index c027b287cd..87270136c6 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL P1P 0.2 nozzle", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX06", + "setting_id": "z9CUoW9SUMr840v9", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL P1P.json index d0dd387bb1..5efa9671f2 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL P1P.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL P1P", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX05", + "setting_id": "Y0N972snI2iVBaMY", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1 0.2 nozzle.json index 62831e8052..ba76a4fd64 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL X1 0.2 nozzle", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX04", + "setting_id": "msqmewkUzhFUnXCt", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1.json index 028ff4b670..e396cea21e 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL X1", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX03", + "setting_id": "KFI0vPD4fV1IXcM7", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1C 0.2 nozzle.json index 7974b443de..5055ec3346 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL X1C 0.2 nozzle", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX02", + "setting_id": "IiYPW1KPNf3ZJJrJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1C.json index 331caa6f06..baf0e668ca 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA PRIME @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA PRIME @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX PLA PRIME @BBL X1C", "inherits": "COEX PLA PRIME @base", "from": "system", - "setting_id": "CXPLPX01", + "setting_id": "VOBMEynoZVDn7WPc", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1 0.2 nozzle.json index 21da9b46b6..1f5af9e8e5 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL A1 0.2 nozzle", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX10", + "setting_id": "2UyZUycIPMP0PUup", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1.json index e609d02f66..b762ca9617 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL A1", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX09", + "setting_id": "XxZ5veyuN2CgIJ5x", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1M 0.2 nozzle.json index 95f8fb9e59..348d2a305e 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL A1M 0.2 nozzle", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX08", + "setting_id": "6Vc8BkXxDP7T8Coo", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1M.json index f2ce3cdce0..8589ba64b2 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL A1M", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX07", + "setting_id": "eu0boRMOVOgQrl3Y", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL P1P 0.2 nozzle.json index 902323e79e..e948f0bb05 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL P1P 0.2 nozzle", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX06", + "setting_id": "OUxQCADBha44cBsA", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL P1P.json index 0d390cb258..99759f5ddd 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL P1P.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL P1P", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX05", + "setting_id": "hk0y7xqoLTA3tNUo", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1 0.2 nozzle.json index a2fd486eca..7f61bf7be2 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL X1 0.2 nozzle", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX04", + "setting_id": "ns9Gncke9yUgUmex", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1.json index 7048da3321..23d856488d 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL X1", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX03", + "setting_id": "0QI62GCE2YGCb7rI", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1C 0.2 nozzle.json index 43e1c0f75a..1fe80d582d 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL X1C 0.2 nozzle", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX02", + "setting_id": "H5u3IWbfcVMSmXoY", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1C.json index 581970defd..85cc1e8c76 100644 --- a/resources/profiles/BBL/filament/COEX/COEX PLA+Silk @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX PLA+Silk @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX PLA+Silk @BBL X1C", "inherits": "COEX PLA+Silk @base", "from": "system", - "setting_id": "CXPLSX01", + "setting_id": "8nvO7iSj7Kr21VYS", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL A1.json index eaa218b86f..57792d2139 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX TPE 30D @BBL A1", "inherits": "COEX TPE 30D @base", "from": "system", - "setting_id": "CX30DX09", + "setting_id": "oSB30vX697zFBQus", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL A1M.json index cebfe28dea..d00a90d06a 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX TPE 30D @BBL A1M", "inherits": "COEX TPE 30D @base", "from": "system", - "setting_id": "CX30DX07", + "setting_id": "DAkMitwruFDPSbRg", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL P1P.json index 321ff2b715..f7ee71643f 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL P1P.json @@ -3,7 +3,7 @@ "name": "COEX TPE 30D @BBL P1P", "inherits": "COEX TPE 30D @base", "from": "system", - "setting_id": "CX30DX05", + "setting_id": "fM4NLTU5iPByCRuc", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL X1.json index f9a4e3efb8..75db97ea70 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX TPE 30D @BBL X1", "inherits": "COEX TPE 30D @base", "from": "system", - "setting_id": "CX30DX03", + "setting_id": "sAU5cu8EPBihEP3m", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL X1C.json index 562df95753..d2dc636f7d 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 30D @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 30D @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX TPE 30D @BBL X1C", "inherits": "COEX TPE 30D @base", "from": "system", - "setting_id": "CX30DX01", + "setting_id": "YD3gdeJlVLobA19c", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1 0.2 nozzle.json index c2a4b814df..17f180ac4c 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL A1 0.2 nozzle", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX10", + "setting_id": "5kmtoD76pdg0QjC6", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1.json index 63bb69cfe1..63351b26f1 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL A1", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX09", + "setting_id": "vIBFZpAkGHevYJ4e", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1M 0.2 nozzle.json index 5a822a1dba..36224d8ed4 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL A1M 0.2 nozzle", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX08", + "setting_id": "kcfjEjxaRqsxGAQW", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1M.json index 1948af44c4..cadb053df3 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL A1M", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX07", + "setting_id": "IzNE1SAjAwkoqxIE", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL P1P 0.2 nozzle.json index 9d67b69e19..36defa8e23 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL P1P 0.2 nozzle", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX06", + "setting_id": "oOlkk48h49OuvTZn", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL P1P.json index 81a519bfc8..31a5a2fe95 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL P1P.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL P1P", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX05", + "setting_id": "218zr889pSXjWLAP", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1 0.2 nozzle.json index 6bcf9675e6..c9ee50ed81 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL X1 0.2 nozzle", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX04", + "setting_id": "jbVhungUNiUfz8XR", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1.json index 158229e332..4b78b22348 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL X1", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX03", + "setting_id": "iivGVcN67LySNauF", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1C 0.2 nozzle.json index 4e1d4b8264..2ba81969e2 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL X1C 0.2 nozzle", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX02", + "setting_id": "khZfUC4r9MBSv1DR", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1C.json index 5ab4e9ea18..e24c6481b1 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 40D @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 40D @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX TPE 40D @BBL X1C", "inherits": "COEX TPE 40D @base", "from": "system", - "setting_id": "CX40DX01", + "setting_id": "L9Dosu0C19pn86o4", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1 0.2 nozzle.json index 8812114a16..65ae57aefc 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL A1 0.2 nozzle", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX10", + "setting_id": "fZGjPDEF9pAAPT3b", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1.json index e3653c8a13..9d94bd2a90 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL A1", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX09", + "setting_id": "HQvwpstkDqMUiUv4", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1M 0.2 nozzle.json index 90c1fec615..bd27b9eb5e 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL A1M 0.2 nozzle", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX08", + "setting_id": "PXeGlTps8xPbMGyl", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1M.json index ca90c77cad..9b63d7fcaa 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL A1M.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL A1M", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX07", + "setting_id": "YjSBLf6gS4qED472", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL P1P 0.2 nozzle.json index 8f6c0a8d69..35540825cf 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL P1P 0.2 nozzle", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX06", + "setting_id": "KCOov85CN9IGBY9i", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL P1P.json index 745f10e97a..e89acac314 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL P1P.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL P1P", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX05", + "setting_id": "Sy5TZ37aHkRJLp0Q", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1 0.2 nozzle.json index 94f9002881..6d1f6a5ea6 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL X1 0.2 nozzle", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX04", + "setting_id": "YoM9DLlAdYgEk4PZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1.json index eb7afe6bfa..f39c9d3de4 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL X1", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX03", + "setting_id": "9eXbTxjk34q8jj3y", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1C 0.2 nozzle.json index 604792b29c..1882d80114 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL X1C 0.2 nozzle", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX02", + "setting_id": "WUhtYzsVYMxdcNIO", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1C.json index 99b2b9a765..6589562d7a 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPE 60D @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPE 60D @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX TPE 60D @BBL X1C", "inherits": "COEX TPE 60D @base", "from": "system", - "setting_id": "CX60DX01", + "setting_id": "YjRgNYgjXV16sqZC", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/COEX/COEX TPU 60A @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPU 60A @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/COEX/COEX TPU 60A @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPU 60A @BBL X1C.json index 19fa44de17..d5d63ffbcf 100644 --- a/resources/profiles/BBL/filament/COEX/COEX TPU 60A @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/COEX/BBL/COEX TPU 60A @BBL X1C.json @@ -3,7 +3,7 @@ "name": "COEX TPU 60A @BBL X1C", "inherits": "COEX TPU 60A @base", "from": "system", - "setting_id": "CX60AX01", + "setting_id": "Kgwghfh0bJD5r1cK", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @System.json index 5fac752fcf..7b347e5f79 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC ABS @System", - "inherits": "DREMC ABS @base", - "from": "system", - "setting_id": "gNjISMxTLwQzDrV9", - "instantiation": "true", - "compatible_printers": [] -} \ No newline at end of file +{ + "type": "filament", + "name": "DREMC ABS @System", + "inherits": "DREMC ABS @base", + "from": "system", + "setting_id": "gNjISMxTLwQzDrV9", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @base.json index fbd2a32e8f..283ba5535c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS @base.json @@ -1,35 +1,35 @@ -{ - "type": "filament", - "name": "DREMC ABS @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFzrUUxc", - "instantiation": "false", - "filament_cost": [ - "24" - ], - "filament_density": [ - "1.06" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_shrink": [ - "99.7" - ], - "fan_max_speed": [ - "20" - ], - "overhang_fan_speed": [ - "50" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "chamber_temperature": [ - "60" - ], - "filament_vendor": [ - "DREMC" - ] -} \ No newline at end of file +{ + "type": "filament", + "name": "DREMC ABS @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFzrUUxc", + "instantiation": "false", + "filament_cost": [ + "24" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_shrink": [ + "99.7" + ], + "fan_max_speed": [ + "20" + ], + "overhang_fan_speed": [ + "50" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "chamber_temperature": [ + "60" + ], + "filament_vendor": [ + "DREMC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @System.json index 0d0345828e..6e367b2622 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC ABS+ @System", - "inherits": "DREMC ABS+ @base", - "from": "system", - "setting_id": "M73sIwcpWv6zpFrb", - "instantiation": "true", - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC ABS+ @System", + "inherits": "DREMC ABS+ @base", + "from": "system", + "setting_id": "M73sIwcpWv6zpFrb", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @base.json index 6817351573..8f9fb0abad 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS+ @base.json @@ -1,26 +1,26 @@ -{ - "type": "filament", - "name": "DREMC ABS+ @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OF99vXPs", - "instantiation": "false", - "filament_cost": [ - "24" - ], - "filament_density": [ - "1.06" - ], - "filament_flow_ratio": [ - "0.93" - ], - "filament_shrink": [ - "99.7" - ], - "filament_max_volumetric_speed": [ - "20" - ], - "filament_vendor": [ - "DREMC" - ] -} +{ + "type": "filament", + "name": "DREMC ABS+ @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OF99vXPs", + "instantiation": "false", + "filament_cost": [ + "24" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_shrink": [ + "99.7" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "DREMC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @System.json index f5cde22b77..ab136b1c02 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @System.json @@ -1,15 +1,15 @@ -{ - "type": "filament", - "name": "DREMC ABS-GF @System", - "inherits": "DREMC ABS-GF @base", - "from": "system", - "setting_id": "eWq555EPhD9cVAPL", - "instantiation": "true", - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC ABS-GF @System", + "inherits": "DREMC ABS-GF @base", + "from": "system", + "setting_id": "eWq555EPhD9cVAPL", + "instantiation": "true", + "filament_long_retractions_when_cut": [ + "1" + ], + "filament_retraction_distances_when_cut": [ + "18" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @base.json index 046a015930..397ca63348 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ABS-GF @base.json @@ -1,44 +1,44 @@ -{ - "type": "filament", - "name": "DREMC ABS-GF @base", - "inherits": "fdm_filament_abs", - "from": "system", - "filament_id": "OFCidU7j", - "instantiation": "false", - "fan_cooling_layer_time": [ - "12" - ], - "fan_max_speed": [ - "30" - ], - "filament_cost": [ - "40" - ], - "filament_density": [ - "1.12" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_shrink": [ - "99.7" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_type": [ - "ABS-GF" - ], - "filament_vendor": [ - "DREMC" - ], - "overhang_fan_speed": [ - "30" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "4" - ] -} +{ + "type": "filament", + "name": "DREMC ABS-GF @base", + "inherits": "fdm_filament_abs", + "from": "system", + "filament_id": "OFCidU7j", + "instantiation": "false", + "fan_cooling_layer_time": [ + "12" + ], + "fan_max_speed": [ + "30" + ], + "filament_cost": [ + "40" + ], + "filament_density": [ + "1.12" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_shrink": [ + "99.7" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_type": [ + "ABS-GF" + ], + "filament_vendor": [ + "DREMC" + ], + "overhang_fan_speed": [ + "30" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "4" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @System.json index 10d6626540..d5481e90f6 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC ASA @System", - "inherits": "DREMC ASA @base", - "from": "system", - "setting_id": "PMulSQ0tYbNyvOYw", - "instantiation": "true", - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC ASA @System", + "inherits": "DREMC ASA @base", + "from": "system", + "setting_id": "PMulSQ0tYbNyvOYw", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @base.json index 5e5e96b148..9b12602c7b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA @base.json @@ -1,44 +1,44 @@ -{ - "type": "filament", - "name": "DREMC ASA @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OFLNgV3C", - "instantiation": "false", - "eng_plate_temp": [ - "110" - ], - "eng_plate_temp_initial_layer": [ - "110" - ], - "filament_cost": [ - "36" - ], - "filament_density": [ - "1.09" - ], - "filament_flow_ratio": [ - "0.94" - ], - "filament_shrink": [ - "99.7" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_vendor": [ - "DREMC" - ], - "hot_plate_temp": [ - "110" - ], - "hot_plate_temp_initial_layer": [ - "110" - ], - "textured_plate_temp": [ - "110" - ], - "textured_plate_temp_initial_layer": [ - "110" - ] -} +{ + "type": "filament", + "name": "DREMC ASA @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OFLNgV3C", + "instantiation": "false", + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "filament_cost": [ + "36" + ], + "filament_density": [ + "1.09" + ], + "filament_flow_ratio": [ + "0.94" + ], + "filament_shrink": [ + "99.7" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "DREMC" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @System.json index 0e10750d78..72d6abf2ca 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC ASA CF @System", - "inherits": "DREMC ASA CF @base", - "from": "system", - "setting_id": "ZcipEKAqtBcAm6vR", - "instantiation": "true", - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC ASA CF @System", + "inherits": "DREMC ASA CF @base", + "from": "system", + "setting_id": "ZcipEKAqtBcAm6vR", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @base.json index ef6c3bc7b5..01065766e5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA CF @base.json @@ -1,50 +1,50 @@ -{ - "type": "filament", - "name": "DREMC ASA CF @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OFdI4zMo", - "instantiation": "false", - "eng_plate_temp": [ - "110" - ], - "eng_plate_temp_initial_layer": [ - "110" - ], - "filament_cost": [ - "48" - ], - "filament_density": [ - "1.09" - ], - "filament_flow_ratio": [ - "0.92" - ], - "filament_shrink": [ - "99.7" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_vendor": [ - "DREMC" - ], - "hot_plate_temp": [ - "110" - ], - "hot_plate_temp_initial_layer": [ - "110" - ], - "textured_plate_temp": [ - "110" - ], - "textured_plate_temp_initial_layer": [ - "110" - ], - "nozzle_temperature": [ - "265" - ], - "nozzle_temperature_initial_layer": [ - "265" - ] -} +{ + "type": "filament", + "name": "DREMC ASA CF @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OFdI4zMo", + "instantiation": "false", + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "filament_cost": [ + "48" + ], + "filament_density": [ + "1.09" + ], + "filament_flow_ratio": [ + "0.92" + ], + "filament_shrink": [ + "99.7" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "DREMC" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "265" + ], + "nozzle_temperature_initial_layer": [ + "265" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @System.json index 2d0f99fa1e..18072f734c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC ASA GF @System", - "inherits": "DREMC ASA GF @base", - "from": "system", - "setting_id": "8J3lt7KlQWcx0VUS", - "instantiation": "true", - "compatible_printers": [] -} \ No newline at end of file +{ + "type": "filament", + "name": "DREMC ASA GF @System", + "inherits": "DREMC ASA GF @base", + "from": "system", + "setting_id": "8J3lt7KlQWcx0VUS", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @base.json index b916335f2f..985063e406 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC ASA GF @base.json @@ -1,50 +1,50 @@ -{ - "type": "filament", - "name": "DREMC ASA GF @base", - "inherits": "fdm_filament_asa", - "from": "system", - "filament_id": "OF2xccEe", - "instantiation": "false", - "eng_plate_temp": [ - "110" - ], - "eng_plate_temp_initial_layer": [ - "110" - ], - "filament_cost": [ - "36" - ], - "filament_density": [ - "1.12" - ], - "filament_flow_ratio": [ - "0.92" - ], - "filament_shrink": [ - "99.7" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "filament_vendor": [ - "DREMC" - ], - "hot_plate_temp": [ - "110" - ], - "hot_plate_temp_initial_layer": [ - "110" - ], - "textured_plate_temp": [ - "110" - ], - "textured_plate_temp_initial_layer": [ - "110" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ] -} +{ + "type": "filament", + "name": "DREMC ASA GF @base", + "inherits": "fdm_filament_asa", + "from": "system", + "filament_id": "OF2xccEe", + "instantiation": "false", + "eng_plate_temp": [ + "110" + ], + "eng_plate_temp_initial_layer": [ + "110" + ], + "filament_cost": [ + "36" + ], + "filament_density": [ + "1.12" + ], + "filament_flow_ratio": [ + "0.92" + ], + "filament_shrink": [ + "99.7" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_vendor": [ + "DREMC" + ], + "hot_plate_temp": [ + "110" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "textured_plate_temp": [ + "110" + ], + "textured_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @System.json index b126651441..46ee06deb1 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC PA12-CF @System", - "inherits": "DREMC PA12-CF @base", - "from": "system", - "setting_id": "jVlZ1KPsA5i8RIED", - "instantiation": "true", - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC PA12-CF @System", + "inherits": "DREMC PA12-CF @base", + "from": "system", + "setting_id": "jVlZ1KPsA5i8RIED", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @base.json index 3482ecedf6..db21421565 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA12-CF @base.json @@ -1,59 +1,59 @@ -{ - "type": "filament", - "name": "DREMC PA12-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFEhuUNq", - "instantiation": "false", - "fan_cooling_layer_time": [ - "15" - ], - "fan_max_speed": [ - "100" - ], - "filament_cost": [ - "105" - ], - "filament_density": [ - "1.06" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "14" - ], - "filament_type": [ - "PA-CF" - ], - "filament_vendor": [ - "DREMC" - ], - "full_fan_speed_layer": [ - "2" - ], - "nozzle_temperature": [ - "290" - ], - "nozzle_temperature_initial_layer": [ - "290" - ], - "nozzle_temperature_range_low": [ - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "temperature_vitrification": [ - "131" - ], - "textured_plate_temp": [ - "80" - ], - "textured_plate_temp_initial_layer": [ - "80" - ] -} +{ + "type": "filament", + "name": "DREMC PA12-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFEhuUNq", + "instantiation": "false", + "fan_cooling_layer_time": [ + "15" + ], + "fan_max_speed": [ + "100" + ], + "filament_cost": [ + "105" + ], + "filament_density": [ + "1.06" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "14" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "DREMC" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "131" + ], + "textured_plate_temp": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @System.json index 61b28cdb4d..26825d9fb4 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC PA6-CF @System", - "inherits": "DREMC PA6-CF @base", - "from": "system", - "setting_id": "GPnfqyRGptMQSsGP", - "instantiation": "true", - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC PA6-CF @System", + "inherits": "DREMC PA6-CF @base", + "from": "system", + "setting_id": "GPnfqyRGptMQSsGP", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @base.json index fe5ef518a1..ebf4155d2f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PA6-CF @base.json @@ -1,53 +1,53 @@ -{ - "type": "filament", - "name": "DREMC PA6-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFsoykbm", - "instantiation": "false", - "fan_cooling_layer_time": [ - "15" - ], - "filament_cost": [ - "68" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PA6-CF" - ], - "filament_vendor": [ - "DREMC" - ], - "nozzle_temperature": [ - "270" - ], - "nozzle_temperature_initial_layer": [ - "270" - ], - "nozzle_temperature_range_low": [ - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "temperature_vitrification": [ - "215" - ], - "textured_plate_temp": [ - "90" - ], - "textured_plate_temp_initial_layer": [ - "90" - ] -} +{ + "type": "filament", + "name": "DREMC PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFsoykbm", + "instantiation": "false", + "fan_cooling_layer_time": [ + "15" + ], + "filament_cost": [ + "68" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PA6-CF" + ], + "filament_vendor": [ + "DREMC" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_low": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "temperature_vitrification": [ + "215" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @System.json index 85efd31920..05c758379b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC PET-CF @System", - "inherits": "DREMC PET-CF @base", - "from": "system", - "setting_id": "hal1nPyBF13UL9qB", - "instantiation": "true", - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC PET-CF @System", + "inherits": "DREMC PET-CF @base", + "from": "system", + "setting_id": "hal1nPyBF13UL9qB", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @base.json index 9f7d27a1a0..a9c3db755d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PET-CF @base.json @@ -1,86 +1,86 @@ -{ - "type": "filament", - "name": "DREMC PET-CF @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFwJ0qu2", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "242" - ], - "fan_min_speed": [ - "0" - ], - "filament_cost": [ - "70" - ], - "filament_density": [ - "1.3" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_type": [ - "PET-CF" - ], - "filament_vendor": [ - "DREMC" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature": [ - "300" - ], - "nozzle_temperature_initial_layer": [ - "300" - ], - "nozzle_temperature_range_high": [ - "300" - ], - "nozzle_temperature_range_low": [ - "270" - ], - "required_nozzle_HRC": [ - "40" - ], - "supertack_plate_temp": [ - "80" - ], - "supertack_plate_temp_initial_layer": [ - "80" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "10" - ], - "temperature_vitrification": [ - "147" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ] -} +{ + "type": "filament", + "name": "DREMC PET-CF @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFwJ0qu2", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "242" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "70" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PET-CF" + ], + "filament_vendor": [ + "DREMC" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "300" + ], + "nozzle_temperature_initial_layer": [ + "300" + ], + "nozzle_temperature_range_high": [ + "300" + ], + "nozzle_temperature_range_low": [ + "270" + ], + "required_nozzle_HRC": [ + "40" + ], + "supertack_plate_temp": [ + "80" + ], + "supertack_plate_temp_initial_layer": [ + "80" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "147" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @System.json index 46f2cb9b20..733448583a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @System.json @@ -1,15 +1,15 @@ -{ - "type": "filament", - "name": "DREMC PETG @System", - "inherits": "DREMC PETG @base", - "from": "system", - "setting_id": "gTGiaBYfymmtlyfG", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "20" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC PETG @System", + "inherits": "DREMC PETG @base", + "from": "system", + "setting_id": "gTGiaBYfymmtlyfG", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "20" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @base.json index c67e185527..9bc66b7ef4 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PETG @base.json @@ -1,59 +1,59 @@ -{ - "type": "filament", - "name": "DREMC PETG @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFVBlUFH", - "instantiation": "false", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "30" - ], - "fan_max_speed": [ - "90" - ], - "fan_min_speed": [ - "20" - ], - "filament_flow_ratio": [ - "0.95" - ], - "filament_vendor": [ - "DREMC" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "overhang_fan_speed": [ - "50" - ], - "overhang_fan_threshold": [ - "10%" - ], - "slow_down_layer_time": [ - "12" - ], - "slow_down_min_speed": [ - "10" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ] -} \ No newline at end of file +{ + "type": "filament", + "name": "DREMC PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFVBlUFH", + "instantiation": "false", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "20" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_vendor": [ + "DREMC" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_speed": [ + "50" + ], + "overhang_fan_threshold": [ + "10%" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "10" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @System.json index 8e98be30b8..801772818c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @System.json @@ -1,12 +1,12 @@ -{ - "type": "filament", - "name": "DREMC PLA+ HS @System", - "inherits": "DREMC PLA+ HS @base", - "from": "system", - "setting_id": "I0HWhYAZ3ppq91Gx", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "22" - ], - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC PLA+ HS @System", + "inherits": "DREMC PLA+ HS @base", + "from": "system", + "setting_id": "I0HWhYAZ3ppq91Gx", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "22" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @base.json index 1d7f1b47af..8aff665468 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA HS @base.json @@ -1,20 +1,20 @@ -{ - "type": "filament", - "name": "DREMC PLA+ HS @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFJHBEGD", - "instantiation": "false", - "filament_cost": [ - "26" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "DREMC" - ] -} +{ + "type": "filament", + "name": "DREMC PLA+ HS @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFJHBEGD", + "instantiation": "false", + "filament_cost": [ + "26" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "DREMC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @System.json index 869633969a..37c782593e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @System.json @@ -1,12 +1,12 @@ -{ - "type": "filament", - "name": "DREMC PLA+ @System", - "inherits": "DREMC PLA+ @base", - "from": "system", - "setting_id": "fIjHIsFmdDWIM1bf", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "18" - ], - "compatible_printers": [] -} \ No newline at end of file +{ + "type": "filament", + "name": "DREMC PLA+ @System", + "inherits": "DREMC PLA+ @base", + "from": "system", + "setting_id": "fIjHIsFmdDWIM1bf", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "18" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @base.json index b989f6d59d..56402a1a71 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PLA+ @base.json @@ -1,20 +1,20 @@ -{ - "type": "filament", - "name": "DREMC PLA+ @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFSwbBWS", - "instantiation": "false", - "filament_cost": [ - "26" - ], - "filament_density": [ - "1.25" - ], - "filament_flow_ratio": [ - "0.98" - ], - "filament_vendor": [ - "DREMC" - ] -} +{ + "type": "filament", + "name": "DREMC PLA+ @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFSwbBWS", + "instantiation": "false", + "filament_cost": [ + "26" + ], + "filament_density": [ + "1.25" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_vendor": [ + "DREMC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @System.json index 32edda19c3..48b62c9ca3 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @System.json @@ -1,9 +1,9 @@ -{ - "type": "filament", - "name": "DREMC PPA-CF @System", - "inherits": "DREMC PPA-CF @base", - "from": "system", - "setting_id": "flUD84NuiAfCit8z", - "instantiation": "true", - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC PPA-CF @System", + "inherits": "DREMC PPA-CF @base", + "from": "system", + "setting_id": "flUD84NuiAfCit8z", + "instantiation": "true", + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @base.json index 6a696177e7..8fd11800be 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC PPA-CF @base.json @@ -1,11 +1,11 @@ -{ - "type": "filament", - "name": "DREMC PPA-CF @base", - "inherits": "fdm_filament_ppa", - "from": "system", - "filament_id": "OFiWaoqD", - "instantiation": "false", - "filament_vendor": [ - "DREMC" - ] -} \ No newline at end of file +{ + "type": "filament", + "name": "DREMC PPA-CF @base", + "inherits": "fdm_filament_ppa", + "from": "system", + "filament_id": "OFiWaoqD", + "instantiation": "false", + "filament_vendor": [ + "DREMC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @System.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @System.json index 86d5d02151..8278548d38 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @System.json @@ -1,12 +1,12 @@ -{ - "type": "filament", - "name": "DREMC TPU 95A @System", - "inherits": "DREMC TPU 95A @base", - "from": "system", - "setting_id": "AfnFh14wKZsNEaZ1", - "instantiation": "true", - "filament_max_volumetric_speed": [ - "6" - ], - "compatible_printers": [] -} +{ + "type": "filament", + "name": "DREMC TPU 95A @System", + "inherits": "DREMC TPU 95A @base", + "from": "system", + "setting_id": "AfnFh14wKZsNEaZ1", + "instantiation": "true", + "filament_max_volumetric_speed": [ + "6" + ], + "compatible_printers": [] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @base.json b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @base.json index 63d4669b47..a0fe66dc47 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/DREMC/DREMC TPU 95A @base.json @@ -1,23 +1,23 @@ -{ - "type": "filament", - "name": "DREMC TPU 95A @base", - "inherits": "fdm_filament_tpu", - "from": "system", - "filament_id": "OFYd5uS3", - "instantiation": "false", - "filament_cost": [ - "40" - ], - "filament_density": [ - "1.25" - ], - "filament_vendor": [ - "DREMC" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_initial_layer": [ - "230" - ] -} +{ + "type": "filament", + "name": "DREMC TPU 95A @base", + "inherits": "fdm_filament_tpu", + "from": "system", + "filament_id": "OFYd5uS3", + "instantiation": "false", + "filament_cost": [ + "40" + ], + "filament_density": [ + "1.25" + ], + "filament_vendor": [ + "DREMC" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ABS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ABS @System.json index 51121cf6fc..0360bbbb63 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ABS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ABS @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo ABS @System", + "renamed_from": "Elegoo ABS", "inherits": "Elegoo ABS @base", "from": "system", "setting_id": "UKRDINWkDngjN16F", "instantiation": "true", - "renamed_from": "Elegoo ABS", "fan_max_speed": [ "40" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA @System.json index 6bd0ca95fd..97cc8563df 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo ASA @System", + "renamed_from": "Elegoo ASA", "inherits": "Elegoo ASA @base", "from": "system", "setting_id": "mpSVVs77BAdKmtP6", @@ -17,6 +18,5 @@ "nozzle_temperature_initial_layer": [ "270" ], - "compatible_printers": [], - "renamed_from": "Elegoo ASA" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA-CF @System.json index 13ef86c2d9..c469fa9019 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo ASA-CF @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo ASA-CF @System", + "renamed_from": "Elegoo ASA-CF", "inherits": "Elegoo ASA-CF @base", "from": "system", "setting_id": "XT1aUl4pe9t0Ijwg", "instantiation": "true", - "renamed_from": "Elegoo ASA-CF", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json index d07ac1dd64..725896bbd5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PAHT-CF @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PAHT-CF @System", + "renamed_from": "Elegoo PAHT-CF", "inherits": "Elegoo PAHT-CF @base", "from": "system", "setting_id": "S073oXCeOlTEqh6L", "instantiation": "true", - "renamed_from": "Elegoo PAHT-CF", "close_fan_the_first_x_layers": [ "3" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC @System.json index 8d2dcf83b7..6cd55a5668 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PC @System", + "renamed_from": "Elegoo PC", "inherits": "Elegoo PC @base", "from": "system", "setting_id": "NlNHcKHlkiq8khIf", "instantiation": "true", - "renamed_from": "Elegoo PC", "pressure_advance": [ "0.052" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC-FR @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC-FR @System.json index 7d2ab85058..e116b9e69a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC-FR @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PC-FR @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PC-FR @System", + "renamed_from": "Elegoo PC-FR", "inherits": "Elegoo PC-FR @base", "from": "system", "setting_id": "JcopkaXZ7YyLjIcw", "instantiation": "true", - "renamed_from": "Elegoo PC-FR", "pressure_advance": [ "0.05" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PET-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PET-CF @System.json index b7191e482b..5609b5ba6b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PET-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PET-CF @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PET-CF @System", + "renamed_from": "Elegoo PET-CF", "inherits": "Elegoo PET-CF @base", "from": "system", "setting_id": "oloKoC4Bs8dXatMU", "instantiation": "true", - "renamed_from": "Elegoo PET-CF", "pressure_advance": [ "0.05" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @System.json index 621945f027..948f0970b6 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PETG @System", + "renamed_from": "Elegoo PETG", "inherits": "Elegoo PETG @base", "from": "system", "setting_id": "4PLHMrDEDw4HLTve", "instantiation": "true", - "renamed_from": "Elegoo PETG", "pressure_advance": [ "0.05" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG HF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG HF @System.json index d912550c88..f67f6bbb15 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG HF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG HF @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PETG HF @System", + "renamed_from": "Elegoo PETG HF", "inherits": "Elegoo PETG HF @base", "from": "system", "setting_id": "d6gNuzrG00SXvMth", "instantiation": "true", - "renamed_from": "Elegoo PETG HF", "pressure_advance": [ "0.052" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @System.json index aa30920b7c..988424367e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG PRO @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PETG PRO @System", + "renamed_from": "Elegoo PETG PRO;Elegoo PETG Pro @System", "inherits": "Elegoo PETG PRO @base", "from": "system", "setting_id": "fdfCAYQEoYa9DN6I", @@ -17,6 +18,5 @@ "filament_max_volumetric_speed": [ "5" ], - "compatible_printers": [], - "renamed_from": "Elegoo PETG PRO;Elegoo PETG Pro @System" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG Translucent @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG Translucent @System.json index edb04a6dce..b73dece8de 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG Translucent @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG Translucent @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PETG Translucent @System", + "renamed_from": "Elegoo PETG Translucent", "inherits": "Elegoo PETG Translucent @base", "from": "system", "setting_id": "80Auuv3K7l8IptF3", "instantiation": "true", - "renamed_from": "Elegoo PETG Translucent", "pressure_advance": [ "0.052" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-CF @System.json index 03de8dad0f..9777aec024 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-CF @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PETG-CF @System", + "renamed_from": "Elegoo PETG-CF", "inherits": "Elegoo PETG-CF @base", "from": "system", "setting_id": "bXRJMaXxB3V49x7R", "instantiation": "true", - "renamed_from": "Elegoo PETG-CF", "pressure_advance": [ "0.052" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-GF @System.json index f315756987..d8fcd5b90a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PETG-GF @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PETG-GF @System", + "renamed_from": "Elegoo PETG-GF", "inherits": "Elegoo PETG-GF @base", "from": "system", "setting_id": "9NXaejLGh1VFX8bg", "instantiation": "true", - "renamed_from": "Elegoo PETG-GF", "pressure_advance": [ "0.052" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @System.json index 6120c0ac97..6e913207ac 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA @System", + "renamed_from": "Elegoo PLA", "inherits": "Elegoo PLA @base", "from": "system", "setting_id": "jiwZ5eoW1vHoJv9K", @@ -26,6 +27,5 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], - "compatible_printers": [], - "renamed_from": "Elegoo PLA" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @base.json index 45456ab6d8..624c4ed95b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA @base.json @@ -6,7 +6,7 @@ "filament_id": "OFvgE0Zh", "instantiation": "false", "fan_cooling_layer_time": [ - "80" + "81" ], "fan_min_speed": [ "50" @@ -39,7 +39,7 @@ "60" ], "filament_start_gcode": [ - "; filament start gcode\n" + "; Elegoo PLA filament start gcode\n" ], "filament_end_gcode": [ "; filament end gcode \n" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Basic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Basic @System.json index 15d6f46a3f..ef10b6b1b2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Basic @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Basic @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PLA Basic @System", + "renamed_from": "Elegoo PLA Basic", "inherits": "Elegoo PLA Basic @base", "from": "system", "setting_id": "qHDFHECwAInvpuk2", "instantiation": "true", - "renamed_from": "Elegoo PLA Basic", "nozzle_temperature": [ "220" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Galaxy @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Galaxy @System.json index 6fd7f8f606..3b00a8b673 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Galaxy @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Galaxy @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PLA Galaxy @System", + "renamed_from": "Elegoo PLA Galaxy", "inherits": "Elegoo PLA Galaxy @base", "from": "system", "setting_id": "WXEEksjWsTbRyCPh", "instantiation": "true", - "renamed_from": "Elegoo PLA Galaxy", "fan_min_speed": [ "80" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Glow @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Glow @System.json index 9c4c2075b8..9a0d4d137b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Glow @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Glow @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PLA Glow @System", + "renamed_from": "Elegoo PLA Glow", "inherits": "Elegoo PLA Glow @base", "from": "system", "setting_id": "yFdF2YmEMeCHiPxl", "instantiation": "true", - "renamed_from": "Elegoo PLA Glow", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Marble @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Marble @System.json index 755e42e758..e6309aca95 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Marble @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Marble @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PLA Marble @System", + "renamed_from": "Elegoo PLA Marble", "inherits": "Elegoo PLA Marble @base", "from": "system", "setting_id": "kq7NS8IhIV4cBI1C", "instantiation": "true", - "renamed_from": "Elegoo PLA Marble", "fan_min_speed": [ "80" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Matte @System.json index a05c57216e..c97d63d201 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Matte @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Matte @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Matte @System", + "renamed_from": "Elegoo PLA Matte", "inherits": "Elegoo PLA Matte @base", "from": "system", "setting_id": "UykE255l5V0oS0Ca", @@ -47,6 +48,5 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], - "compatible_printers": [], - "renamed_from": "Elegoo PLA Matte" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA PRO @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA PRO @System.json index fbc18fac42..8ec9dd9746 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA PRO @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA PRO @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA PRO @System", + "renamed_from": "Elegoo PLA PRO", "inherits": "Elegoo PLA PRO @base", "from": "system", "setting_id": "62GiUVVZd8kx21vw", @@ -23,6 +24,5 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], - "compatible_printers": [], - "renamed_from": "Elegoo PLA PRO" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Silk @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Silk @System.json index 79ae01da5b..b6b8387375 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Silk @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Silk @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA Silk @System", + "renamed_from": "Elegoo PLA Silk", "inherits": "Elegoo PLA Silk @base", "from": "system", "setting_id": "VkXguNj79KADxuYn", @@ -47,6 +48,5 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], - "compatible_printers": [], - "renamed_from": "Elegoo PLA Silk" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Sparkle @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Sparkle @System.json index c7c030ff5a..203f67162e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Sparkle @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Sparkle @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PLA Sparkle @System", + "renamed_from": "Elegoo PLA Sparkle", "inherits": "Elegoo PLA Sparkle @base", "from": "system", "setting_id": "VwZIFCojZLQLPrI1", "instantiation": "true", - "renamed_from": "Elegoo PLA Sparkle", "fan_min_speed": [ "80" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Translucent2 @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Translucent2 @System.json index 28993f13b4..2fc32af720 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Translucent2 @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Translucent2 @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PLA Translucent2 @System", + "renamed_from": "Elegoo PLA Translucent2", "inherits": "Elegoo PLA Translucent2 @base", "from": "system", "setting_id": "q0koYRlO9X8xLXPM", "instantiation": "true", - "renamed_from": "Elegoo PLA Translucent2", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json index 1e86976608..9e54df5c0b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA Wood @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo PLA Wood @System", + "renamed_from": "Elegoo PLA Wood", "inherits": "Elegoo PLA Wood @base", "from": "system", "setting_id": "pMgazYJG8tyTpAVE", "instantiation": "true", - "renamed_from": "Elegoo PLA Wood", "fan_min_speed": [ "80" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA+ @System.json index 2315cd2ac4..c155f82d3d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA+ @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA+ @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA+ @System", + "renamed_from": "Elegoo PLA+", "inherits": "Elegoo PLA+ @base", "from": "system", "setting_id": "q7NpDtaD9dTq1HIZ", @@ -20,6 +21,5 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], - "compatible_printers": [], - "renamed_from": "Elegoo PLA+" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA-CF @System.json index 9b79f54799..0bb0edb9b9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo PLA-CF @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo PLA-CF @System", + "renamed_from": "Elegoo PLA-CF", "inherits": "Elegoo PLA-CF @base", "from": "system", "setting_id": "cYxM93L2KZBnAuWu", @@ -56,6 +57,5 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], - "compatible_printers": [], - "renamed_from": "Elegoo PLA-CF" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PETG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PETG @System.json index 7fd3f8d160..ee13e5c9c9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PETG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PETG @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo Rapid PETG @System", + "renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+;Elegoo RAPID PETG;Elegoo RAPID PETG+", "inherits": "Elegoo Rapid PETG @base", "from": "system", "setting_id": "uUQSVOvP8tAaDqvB", @@ -32,6 +33,5 @@ "nozzle_temperature_initial_layer": [ "250" ], - "compatible_printers": [], - "renamed_from": "Elegoo Rapid PETG;Elegoo Rapid PETG+;Elegoo RAPID PETG;Elegoo RAPID PETG+" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PLA+ @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PLA+ @System.json index 4f3ee82ced..a632544557 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PLA+ @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid PLA+ @System.json @@ -1,6 +1,7 @@ { "type": "filament", "name": "Elegoo Rapid PLA+ @System", + "renamed_from": "Elegoo Rapid PLA+;Elegoo RAPID PLA+", "inherits": "Elegoo Rapid PLA+ @base", "from": "system", "setting_id": "HZ4nP67iAG7a243e", @@ -44,6 +45,5 @@ "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" ], - "compatible_printers": [], - "renamed_from": "Elegoo Rapid PLA+;Elegoo RAPID PLA+" + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid TPU 95A @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid TPU 95A @System.json index 3d15ba541c..e64c237aa7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid TPU 95A @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo Rapid TPU 95A @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo Rapid TPU 95A @System", + "renamed_from": "Elegoo Rapid TPU 95A", "inherits": "Elegoo Rapid TPU 95A @base", "from": "system", "setting_id": "WXLuO112bsdM37MI", "instantiation": "true", - "renamed_from": "Elegoo Rapid TPU 95A", "pressure_advance": [ "0.1" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo TPU 95A @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo TPU 95A @System.json index 020bb85945..fdc4a7546d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo TPU 95A @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Elegoo/Elegoo TPU 95A @System.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Elegoo TPU 95A @System", + "renamed_from": "Elegoo TPU 95A", "inherits": "Elegoo TPU 95A @base", "from": "system", "setting_id": "SLcn59fIZPDl2brJ", "instantiation": "true", - "renamed_from": "Elegoo TPU 95A", "filament_max_volumetric_speed": [ "3.2" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ABS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ABS @System.json index 09fe0e6298..b73866a0f2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ABS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ABS @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFXCBZTA", - "setting_id": "R1lkPc60BdFq6i2Z", "name": "Eolas Prints ABS @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "R1lkPc60BdFq6i2Z", + "filament_id": "OFXCBZTA", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ASA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ASA @System.json index 263752abf1..e5fd6a2412 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ASA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints ASA @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFlSNkhc", - "setting_id": "JFXFsEzqXxNqxnsL", "name": "Eolas Prints ASA @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "JFXFsEzqXxNqxnsL", + "filament_id": "OFlSNkhc", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG @System.json index 9f1c691c30..33a64f72e5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFhWhL1i", - "setting_id": "u9fzEmHRAACOHT6J", "name": "Eolas Prints PETG @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "u9fzEmHRAACOHT6J", + "filament_id": "OFhWhL1i", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG Transition @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG Transition @System.json index 47245f3f54..890d68f491 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG Transition @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG Transition @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFRiFnfQ", - "setting_id": "BY3z4yKW9PQZwgto", "name": "Eolas Prints PETG Transition @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "BY3z4yKW9PQZwgto", + "filament_id": "OFRiFnfQ", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG UV Resistant @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG UV Resistant @System.json index 749b37cb54..8c50f37064 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG UV Resistant @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PETG UV Resistant @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFx8Lmsd", - "setting_id": "eexjO9xiesNROPCK", "name": "Eolas Prints PETG UV Resistant @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "eexjO9xiesNROPCK", + "filament_id": "OFx8Lmsd", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Antibacterial @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Antibacterial @System.json index a9cbc62ed2..46ebc7ae49 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Antibacterial @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Antibacterial @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFkzr35f", - "setting_id": "LAihILsSxo3djWjq", "name": "Eolas Prints PLA Antibacterial @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "LAihILsSxo3djWjq", + "filament_id": "OFkzr35f", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA High Speed @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA High Speed @System.json index 7488530282..2d6555bd1d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA High Speed @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA High Speed @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFvzvwCu", - "setting_id": "5g69jS4PRY0PbXvI", "name": "Eolas Prints PLA High Speed @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "5g69jS4PRY0PbXvI", + "filament_id": "OFvzvwCu", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 850 @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 850 @System.json index c4c66400e4..35bf1435e7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 850 @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 850 @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFH2nN08", - "setting_id": "jdjLUTsIovrt3UAF", "name": "Eolas Prints PLA INGEO 850 @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "jdjLUTsIovrt3UAF", + "filament_id": "OFH2nN08", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 870 @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 870 @System.json index f8ae8e662c..8e84babe2f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 870 @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA INGEO 870 @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFPc4zVY", - "setting_id": "AafBj7XbFWaNhKHu", "name": "Eolas Prints PLA INGEO 870 @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "AafBj7XbFWaNhKHu", + "filament_id": "OFPc4zVY", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Matte @System.json index 9489d9f0f7..3b3bef69a4 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Matte @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Matte @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFf5awy4", - "setting_id": "7LiJHuwirgABvbUa", "name": "Eolas Prints PLA Matte @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "7LiJHuwirgABvbUa", + "filament_id": "OFf5awy4", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json index d6619b629c..034fe0d72f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Neon @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFrFBEfd", - "setting_id": "sKgUBhF3VvETDkwg", "name": "Eolas Prints PLA Neon @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "sKgUBhF3VvETDkwg", + "filament_id": "OFrFBEfd", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Premium @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Premium @System.json index 03c332daa0..1ed527c6ad 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Premium @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Premium @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFtudokz", - "setting_id": "O2Ur7FIG2YlVEyZp", "name": "Eolas Prints PLA Premium @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "O2Ur7FIG2YlVEyZp", + "filament_id": "OFtudokz", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json index b59d6ebf3d..e913c6a9d9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Silk @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFbP8zEO", - "setting_id": "WN0GdqBsjhvnyDmG", "name": "Eolas Prints PLA Silk @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "WN0GdqBsjhvnyDmG", + "filament_id": "OFbP8zEO", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Transition @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Transition @System.json index 22bb2af20a..575d66d2dc 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Transition @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints PLA Transition @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFHfzQXo", - "setting_id": "o3RoG3NGSBlyBkfZ", "name": "Eolas Prints PLA Transition @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "o3RoG3NGSBlyBkfZ", + "filament_id": "OFHfzQXo", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex 93A @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex 93A @System.json index c2252c5df8..49643b7cc8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex 93A @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex 93A @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFhfd722", - "setting_id": "bQPvp6BCMzcG8FOi", "name": "Eolas Prints TPU Flex 93A @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "bQPvp6BCMzcG8FOi", + "filament_id": "OFhfd722", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D53 @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D53 @System.json index f6b85ebd29..3223cc6bb5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D53 @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D53 @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFIegjmD", - "setting_id": "XIFP4KMuMtXF5bjQ", "name": "Eolas Prints TPU Flex D53 @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "XIFP4KMuMtXF5bjQ", + "filament_id": "OFIegjmD", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D60 UV Resistant @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D60 UV Resistant @System.json index 4fc33c0d64..c8bdffbd3a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D60 UV Resistant @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Flex D60 UV Resistant @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFvVy7yo", - "setting_id": "rJmsm0zjvsk9Dy0G", "name": "Eolas Prints TPU D60 UV Resistant @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "rJmsm0zjvsk9Dy0G", + "filament_id": "OFvVy7yo", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Transition @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Transition @System.json index 31dd33a87d..b1f7114d15 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Transition @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Eolas Prints/Eolas Prints TPU Transition @System.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFTOPcx0", - "setting_id": "CM24KGoHLt0yLH93", "name": "Eolas Prints TPU Transition @System", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "CM24KGoHLt0yLH93", + "filament_id": "OFTOPcx0", + "instantiation": "true", "filament_color": [ "#4d9398" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @System.json index bea08bf527..364a065362 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @System.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FILL3D PA @System", + "inherits": "FILL3D PA @base", "from": "system", "setting_id": "IX32M9Hib9UlDHuW", "instantiation": "true", - "inherits": "FILL3D PA @base", "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @base.json index bb8f8905e3..2c243c8779 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PA @base.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "FILL3D PA @base", + "inherits": "fdm_filament_pa", "from": "system", "filament_id": "OFJNeELv", "instantiation": "false", - "inherits": "fdm_filament_pa", "filament_vendor": [ "FILL3D" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @System.json index 6600d5fc36..0b072d4941 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @System.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FILL3D PETG @System", + "inherits": "FILL3D PETG @base", "from": "system", "setting_id": "f8kKGdxNz45g3xtZ", "instantiation": "true", - "inherits": "FILL3D PETG @base", "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @base.json index f0a0e32f26..a38dadedc4 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG @base.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "FILL3D PETG @base", + "inherits": "fdm_filament_pet", "from": "system", "filament_id": "OFQbjX3s", "instantiation": "false", - "inherits": "fdm_filament_pet", "filament_vendor": [ "FILL3D" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @System.json index 093e6d0ba8..9d942e6968 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @System.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FILL3D PETG CF @System", + "inherits": "FILL3D PETG CF @base", "from": "system", "setting_id": "MqNSM5lYck0H1Uyd", "instantiation": "true", - "inherits": "FILL3D PETG CF @base", "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @base.json index 0d1dc4a737..1dfedb9045 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PETG CF @base.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "FILL3D PETG CF @base", + "inherits": "fdm_filament_pet", "from": "system", "filament_id": "OFOiJfLM", "instantiation": "false", - "inherits": "fdm_filament_pet", "filament_vendor": [ "FILL3D" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @System.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @System.json index cbe0c934f2..ded0d4cc51 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @System.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FILL3D PLA Basic @System", + "inherits": "FILL3D PLA Basic @base", "from": "system", "setting_id": "b8Gq0WEZwF3Ty1As", "instantiation": "true", - "inherits": "FILL3D PLA Basic @base", "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @base.json index 13d29eaaa8..a053c5278b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Basic @base.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "FILL3D PLA Basic @base", + "inherits": "fdm_filament_pla", "from": "system", "filament_id": "OFDpW3J8", "instantiation": "false", - "inherits": "fdm_filament_pla", "filament_vendor": [ "FILL3D" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @System.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @System.json index 6fa7fe2738..6e27267a87 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @System.json @@ -1,9 +1,9 @@ { "type": "filament", - "setting_id": "eWB0sfzKjOAnz8iy", "name": "FILL3D PLA Turbo @System", - "from": "system", - "instantiation": "true", "inherits": "FILL3D PLA Turbo @base", + "from": "system", + "setting_id": "eWB0sfzKjOAnz8iy", + "instantiation": "true", "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @base.json index 38be0d7078..f31476056d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PLA Turbo @base.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "FILL3D PLA Turbo @base", + "inherits": "fdm_filament_pla", "from": "system", "filament_id": "OFoSknDB", "instantiation": "false", - "inherits": "fdm_filament_pla", "adaptive_pressure_advance": [ "1" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @System.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @System.json index 8a4e89650e..ab9792c196 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @System.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FILL3D PP @System", + "inherits": "FILL3D PP @base", "from": "system", "setting_id": "7FAQwU4JwTfuaGa1", "instantiation": "true", - "inherits": "FILL3D PP @base", "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @base.json index 708e4c50ec..991253f510 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PP @base.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "FILL3D PP @base", + "inherits": "fdm_filament_pp", "from": "system", "filament_id": "OFPWPlSC", "instantiation": "false", - "inherits": "fdm_filament_pp", "filament_vendor": [ "FILL3D" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @System.json index 313b3ff01b..2dc6362e5f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @System.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FILL3D PPCF @System", + "inherits": "FILL3D PPCF @base", "from": "system", "setting_id": "CuI1vfvq3rjnqXQq", "instantiation": "true", - "inherits": "FILL3D PPCF @base", "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @base.json index 6d6aaf9e34..639a6981dd 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FILL3D/FILL3D PPCF @base.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "FILL3D PPCF @base", + "inherits": "fdm_filament_pp", "from": "system", "filament_id": "OFg8hMzT", "instantiation": "false", - "inherits": "fdm_filament_pp", "filament_vendor": [ "FILL3D" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG @base.json index 340dc5da23..d85a652fca 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG @base.json @@ -1,53 +1,53 @@ { - "type": "filament", - "name": "FilAr PETG @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OF5rnhjh", - "instantiation": "false", - "filament_type": [ - "PETG" - ], - "filament_vendor": [ - "FilAr" - ], - "filament_diameter": [ - "1.75" - ], - "filament_density": [ - "1.27" - ], - "filament_flow_ratio": [ - "0.95" - ], - "nozzle_temperature": [ - "240" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "hot_plate_temp": [ - "78" - ], - "hot_plate_temp_initial_layer": [ - "78" - ], - "textured_plate_temp": [ - "78" - ], - "textured_plate_temp_initial_layer": [ - "78" - ], - "fan_min_speed": [ - "40" - ], - "fan_max_speed": [ - "60" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OF5rnhjh", + "instantiation": "false", + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "FilAr" + ], + "filament_diameter": [ + "1.75" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "hot_plate_temp": [ + "78" + ], + "hot_plate_temp_initial_layer": [ + "78" + ], + "textured_plate_temp": [ + "78" + ], + "textured_plate_temp_initial_layer": [ + "78" + ], + "fan_min_speed": [ + "40" + ], + "fan_max_speed": [ + "60" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Lima.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Lima.json index b1284f1d3d..6dba9cad51 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Lima.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Lima.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Amarillo Lima", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "QuJY74Af8ssl9uuB", - "filament_id": "OFt6e0US", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#C7E03A" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Amarillo Lima", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "QuJY74Af8ssl9uuB", + "filament_id": "OFt6e0US", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#C7E03A" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Radiante.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Radiante.json index 00e5af59a1..f40144889a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Radiante.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Amarillo Radiante.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Amarillo Radiante", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "aFO2PDBIQqvNlH9p", - "filament_id": "OF0Vtzaw", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FFD400" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Amarillo Radiante", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "aFO2PDBIQqvNlH9p", + "filament_id": "OF0Vtzaw", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FFD400" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Boreal.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Boreal.json index cbed2c3aa7..bbf4e876b2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Boreal.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Boreal.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Azul Boreal", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "JQsOaH7Zcs0cLLPY", - "filament_id": "OFNU9YIW", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#1B4F9C" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Azul Boreal", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "JQsOaH7Zcs0cLLPY", + "filament_id": "OFNU9YIW", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#1B4F9C" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Francia.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Francia.json index f2d8c16a43..c9919e6833 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Francia.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Francia.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Azul Francia", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "O24dTvHOzlbikvmq", - "filament_id": "OF44VYzK", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#0033A0" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Azul Francia", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "O24dTvHOzlbikvmq", + "filament_id": "OF44VYzK", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#0033A0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Imperial.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Imperial.json index 8c917d750a..e71e68ae3f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Imperial.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Azul Imperial.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Azul Imperial", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "JAUmcvfO2lnmxGj5", - "filament_id": "OF2Z1nT5", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#14306B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Azul Imperial", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "JAUmcvfO2lnmxGj5", + "filament_id": "OF2Z1nT5", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#14306B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Blanco Antartida.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Blanco Antartida.json index c2bd7f3368..34e470b384 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Blanco Antartida.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Blanco Antartida.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Blanco Antartida", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "dd4fL2ztjz4UiTaG", - "filament_id": "OFsXQXbs", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#F7FAFC" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Blanco Antartida", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "dd4fL2ztjz4UiTaG", + "filament_id": "OFsXQXbs", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#F7FAFC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cian.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cian.json index ac1d1be6fe..52c4c8765e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cian.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cian.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Cian", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "kQFbBS3nxU7M2yPa", - "filament_id": "OFnejEt4", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#00B7D4" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Cian", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "kQFbBS3nxU7M2yPa", + "filament_id": "OFnejEt4", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#00B7D4" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Coral.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Coral.json index 9b3e380b57..a3795310ab 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Coral.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Coral.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Coral", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "fspbgXmAOWjFBQqh", - "filament_id": "OFysxCep", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FF6F5E" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Coral", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "fspbgXmAOWjFBQqh", + "filament_id": "OFysxCep", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FF6F5E" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cristal.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cristal.json index 1e7c947bea..3aa6ef6fe0 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cristal.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Cristal.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Cristal", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "MnA2FnHdIuViwo41", - "filament_id": "OFJQDUk3", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#E8F0EC" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Cristal", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "MnA2FnHdIuViwo41", + "filament_id": "OFJQDUk3", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#E8F0EC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Ceniza.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Ceniza.json index c20eb5fcad..28205f3b09 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Ceniza.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Ceniza.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Gris Ceniza", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "oYjDczRs4U1JdteC", - "filament_id": "OFybzvQN", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#B4B6B1" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Gris Ceniza", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "oYjDczRs4U1JdteC", + "filament_id": "OFybzvQN", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#B4B6B1" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Plata.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Plata.json index 93335c7951..b013b19150 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Plata.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Gris Plata.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Gris Plata", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "eCJ5aFcQ00m97U35", - "filament_id": "OFgpLTMR", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#8C8686" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Gris Plata", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "eCJ5aFcQ00m97U35", + "filament_id": "OFgpLTMR", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#8C8686" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Magenta.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Magenta.json index 5a8ac777f5..ddca59214d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Magenta.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Magenta.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Magenta", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "CEOhwBE63SWwuh6P", - "filament_id": "OFurdQxc", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#B5174B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Magenta", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "CEOhwBE63SWwuh6P", + "filament_id": "OFurdQxc", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#B5174B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Negro Azabache.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Negro Azabache.json index 5cba6c4a02..a3325d5214 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Negro Azabache.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Negro Azabache.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Negro Azabache", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "OPZin7y48ZEeiH8D", - "filament_id": "OFq8gfS4", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#000000" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Negro Azabache", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "OPZin7y48ZEeiH8D", + "filament_id": "OFq8gfS4", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#000000" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Rojo Carmesi.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Rojo Carmesi.json index 3ed33ea0f9..aa00dbce0f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Rojo Carmesi.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PETG Rojo Carmesi.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PETG Rojo Carmesi", - "inherits": "FilAr PETG @base", - "from": "system", - "setting_id": "ok1h38XzyQXPBIMM", - "filament_id": "OFPbyOSk", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#8C1020" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PETG Rojo Carmesi", + "inherits": "FilAr PETG @base", + "from": "system", + "setting_id": "ok1h38XzyQXPBIMM", + "filament_id": "OFPbyOSk", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#8C1020" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA @base.json index c5ed35c1f1..547e5ab043 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA @base.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "FilAr PLA @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OF4KsW72", - "instantiation": "false", - "filament_type": [ - "PLA" - ], - "filament_vendor": [ - "FilAr" - ], - "filament_diameter": [ - "1.75" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.98" - ], - "nozzle_temperature": [ - "210" - ], - "nozzle_temperature_initial_layer": [ - "215" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OF4KsW72", + "instantiation": "false", + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "FilAr" + ], + "filament_diameter": [ + "1.75" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "nozzle_temperature": [ + "210" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "nozzle_temperature_range_low": [ + "200" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Amarillo Lirio.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Amarillo Lirio.json index 1d6c41003b..e42c565e63 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Amarillo Lirio.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Amarillo Lirio.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Amarillo Lirio", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "sZEY2QrlLsDkgZin", - "filament_id": "OF8aFWfQ", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FFD52B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Amarillo Lirio", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "sZEY2QrlLsDkgZin", + "filament_id": "OF8aFWfQ", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FFD52B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Azul Francia.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Azul Francia.json index a2f84470c4..d369ea77c2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Azul Francia.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Azul Francia.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Azul Francia", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "kOF3UfqKVqWKFwiH", - "filament_id": "OFnYVFk2", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#0000FF" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Azul Francia", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "kOF3UfqKVqWKFwiH", + "filament_id": "OFnYVFk2", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#0000FF" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Antartida.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Antartida.json index e9d68452dc..45f399f37f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Antartida.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Antartida.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Blanco Antartida", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "9KxtnS1WoUAgH323", - "filament_id": "OFHAccHz", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#F7FAFC" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Blanco Antartida", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "9KxtnS1WoUAgH323", + "filament_id": "OFHAccHz", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#F7FAFC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Calido.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Calido.json index 1166928647..ad66e02521 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Calido.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Blanco Calido.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Blanco Calido", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "pAToQatK3PVTMHrW", - "filament_id": "OFKTSiYF", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FFF8E7" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Blanco Calido", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "pAToQatK3PVTMHrW", + "filament_id": "OFKTSiYF", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FFF8E7" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Bronce.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Bronce.json index 599c64038c..51e2a4bb66 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Bronce.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Bronce.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Bronce", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "bJuNDmVGIF0TXvkk", - "filament_id": "OFWTRJ1K", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#AD8428" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Bronce", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "bJuNDmVGIF0TXvkk", + "filament_id": "OFWTRJ1K", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#AD8428" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cafe con Leche.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cafe con Leche.json index b70feb22d4..ffd0d08354 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cafe con Leche.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cafe con Leche.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Cafe con Leche", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "vlPu3T66cQhIr5nl", - "filament_id": "OFWwF7K7", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#E0B269" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Cafe con Leche", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "vlPu3T66cQhIr5nl", + "filament_id": "OFWwF7K7", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#E0B269" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Carpincho.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Carpincho.json index bdb948112a..538c7b23a7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Carpincho.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Carpincho.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Carpincho", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "dNsCH2BVjuq3jrN7", - "filament_id": "OFKWWgyp", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#E8DFC1" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Carpincho", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "dNsCH2BVjuq3jrN7", + "filament_id": "OFKWWgyp", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#E8DFC1" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Celeste Cielo.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Celeste Cielo.json index f0ca1c323c..a836b2da5b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Celeste Cielo.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Celeste Cielo.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Celeste Cielo", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "baAQZuzRZD0nwmqH", - "filament_id": "OFaDOaNt", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#A1EBFF" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Celeste Cielo", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "baAQZuzRZD0nwmqH", + "filament_id": "OFaDOaNt", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#A1EBFF" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cobre.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cobre.json index 44402e7b5a..387493e380 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cobre.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Cobre.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Cobre", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "BpYgVH5d3LOdib3U", - "filament_id": "OFNemJM6", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#87421E" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Cobre", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "BpYgVH5d3LOdib3U", + "filament_id": "OFNemJM6", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#87421E" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Dorado.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Dorado.json index fd25d70050..a1aefcad52 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Dorado.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Dorado.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Dorado", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "KHIdy0oNw9YYDNOD", - "filament_id": "OF5P4jgA", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#A67F00" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Dorado", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "KHIdy0oNw9YYDNOD", + "filament_id": "OF5P4jgA", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#A67F00" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Ceniza.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Ceniza.json index d09d053c53..ae41bd4072 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Ceniza.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Ceniza.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Gris Ceniza", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "LBpWNtHWPyZi96wr", - "filament_id": "OFIamQnD", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#B4B6B1" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Gris Ceniza", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "LBpWNtHWPyZi96wr", + "filament_id": "OFIamQnD", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#B4B6B1" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Pizarra.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Pizarra.json index c6809d1104..ea38dedda9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Pizarra.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Pizarra.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Gris Pizarra", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "SeePXOShT3cge6TS", - "filament_id": "OFTlRzpe", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#4B4B4B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Gris Pizarra", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "SeePXOShT3cge6TS", + "filament_id": "OFTlRzpe", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#4B4B4B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Plata.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Plata.json index 3748c83352..4091ccc39f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Plata.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Gris Plata.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Gris Plata", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "B6HABCdHSblZS7lQ", - "filament_id": "OFKKajh6", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#8C8686" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Gris Plata", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "B6HABCdHSblZS7lQ", + "filament_id": "OFKKajh6", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#8C8686" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Manteca.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Manteca.json index 81c6eb5928..792fb3a0c8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Manteca.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Manteca.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Manteca", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "tR4io22VQO0J8UsV", - "filament_id": "OFexaZU2", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FFF5AB" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Manteca", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "tR4io22VQO0J8UsV", + "filament_id": "OFexaZU2", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FFF5AB" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Marron Oxido.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Marron Oxido.json index 452b48010d..9c8f6f9b3f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Marron Oxido.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Marron Oxido.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Marron Oxido", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "r9eviTeCeTW4rLuz", - "filament_id": "OFAt6ec0", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#5E190E" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Marron Oxido", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "r9eviTeCeTW4rLuz", + "filament_id": "OFAt6ec0", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#5E190E" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Naranja Tigre.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Naranja Tigre.json index dd5475f0c6..d42a83f938 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Naranja Tigre.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Naranja Tigre.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Naranja Tigre", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "zLZxXa78e1oiYWSg", - "filament_id": "OFKZ9skj", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FC5017" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Naranja Tigre", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "zLZxXa78e1oiYWSg", + "filament_id": "OFKZ9skj", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FC5017" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Negro Azabache.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Negro Azabache.json index aaf06f8833..782e2bc624 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Negro Azabache.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Negro Azabache.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Negro Azabache", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "glc7ip75qjodcceS", - "filament_id": "OFgMWJ8T", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#000000" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Negro Azabache", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "glc7ip75qjodcceS", + "filament_id": "OFgMWJ8T", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#000000" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Oro.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Oro.json index 03e171b525..2102a321b8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Oro.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Oro.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Oro", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "hCv43F2tNJagwzC7", - "filament_id": "OF5nlfKY", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FFD700" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Oro", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "hCv43F2tNJagwzC7", + "filament_id": "OF5nlfKY", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FFD700" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Piel.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Piel.json index 4ae2924081..46556f00b8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Piel.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Piel.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Piel", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "6ZwTYvV27Oj3l33v", - "filament_id": "OFsDXRpS", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FADDAC" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Piel", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "6ZwTYvV27Oj3l33v", + "filament_id": "OFsDXRpS", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FADDAC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rojo de Carreras.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rojo de Carreras.json index 95c3c870bc..358ad6769e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rojo de Carreras.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rojo de Carreras.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Rojo de Carreras", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "5dINxIgy0kMYYNDT", - "filament_id": "OFaEesXQ", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FA0F0F" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Rojo de Carreras", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "5dINxIgy0kMYYNDT", + "filament_id": "OFaEesXQ", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FA0F0F" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Amaranto.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Amaranto.json index 62763f36a5..7bc5f981ba 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Amaranto.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Amaranto.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Rosa Amaranto", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "wgxgJfhOa2ZPikRH", - "filament_id": "OFPqX3x2", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FA4164" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Rosa Amaranto", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "wgxgJfhOa2ZPikRH", + "filament_id": "OFPqX3x2", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FA4164" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Flamenco.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Flamenco.json index 9fb203bb0c..2ca378da29 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Flamenco.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Rosa Flamenco.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Rosa Flamenco", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "FhROwdLMSz3cyRZo", - "filament_id": "OFZ4QbfK", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#FFC7C2" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Rosa Flamenco", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "FhROwdLMSz3cyRZo", + "filament_id": "OFZ4QbfK", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#FFC7C2" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Tabaco.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Tabaco.json index 6925843d95..3cb6d377b5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Tabaco.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Tabaco.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Tabaco", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "6ax7ka7LBHqhBigT", - "filament_id": "OFjT9PkZ", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#7D5429" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Tabaco", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "6ax7ka7LBHqhBigT", + "filament_id": "OFjT9PkZ", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#7D5429" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Titanio.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Titanio.json index f7b823fe5b..b687dd6726 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Titanio.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Titanio.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Titanio", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "ZRedeSWJhUayeJLw", - "filament_id": "OFQWIKbV", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#878681" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Titanio", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "ZRedeSWJhUayeJLw", + "filament_id": "OFQWIKbV", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#878681" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde FilAr.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde FilAr.json index e3355ffa43..d4f853d0a7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde FilAr.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde FilAr.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Verde FilAr", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "SYWoimklLqx5O2Xh", - "filament_id": "OFvPPMxL", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#036D6B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Verde FilAr", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "SYWoimklLqx5O2Xh", + "filament_id": "OFvPPMxL", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#036D6B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Manzana.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Manzana.json index 46772cf083..0d2c420f7d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Manzana.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Manzana.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Verde Manzana", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "FlPRrQEcKnVKwJDM", - "filament_id": "OFdb8YNz", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#D4FF38" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Verde Manzana", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "FlPRrQEcKnVKwJDM", + "filament_id": "OFdb8YNz", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#D4FF38" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Oliva.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Oliva.json index 6fe74aa2f3..c1cf89131d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Oliva.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Oliva.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Verde Oliva", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "eWAcT15sDLZeV2uS", - "filament_id": "OFkoLUtR", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#595900" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Verde Oliva", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "eWAcT15sDLZeV2uS", + "filament_id": "OFkoLUtR", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#595900" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Pixel.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Pixel.json index 9068b293f2..1ae9dbcac8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Pixel.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Verde Pixel.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Verde Pixel", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "Z7toK1R2GuzHVgfo", - "filament_id": "OFkGvN4d", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#02E32F" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Verde Pixel", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "Z7toK1R2GuzHVgfo", + "filament_id": "OFkGvN4d", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#02E32F" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Violeta Jacaranda.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Violeta Jacaranda.json index fa12bcc077..d79155046b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Violeta Jacaranda.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA Violeta Jacaranda.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA Violeta Jacaranda", - "inherits": "FilAr PLA @base", - "from": "system", - "setting_id": "4VO2Qb2cTXQ1TJv2", - "filament_id": "OFP26zNb", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#9342C9" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA Violeta Jacaranda", + "inherits": "FilAr PLA @base", + "from": "system", + "setting_id": "4VO2Qb2cTXQ1TJv2", + "filament_id": "OFP26zNb", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#9342C9" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate @base.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate @base.json index 972f5a4220..669e40909b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate @base.json @@ -1,47 +1,47 @@ { - "type": "filament", - "name": "FilAr PLA-mate @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFtOoWIj", - "instantiation": "false", - "filament_type": [ - "PLA" - ], - "filament_vendor": [ - "FilAr" - ], - "filament_diameter": [ - "1.75" - ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.98" - ], - "nozzle_temperature": [ - "200" - ], - "nozzle_temperature_initial_layer": [ - "205" - ], - "nozzle_temperature_range_low": [ - "195" - ], - "nozzle_temperature_range_high": [ - "210" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFtOoWIj", + "instantiation": "false", + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "FilAr" + ], + "filament_diameter": [ + "1.75" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "nozzle_temperature_range_low": [ + "195" + ], + "nozzle_temperature_range_high": [ + "210" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Amarillo.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Amarillo.json index 98a2349ac1..d9efefd3f7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Amarillo.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Amarillo.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Amarillo", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "f8DPrkYuTUPJ3cru", - "filament_id": "OFj3bTjw", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#E8C547" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Amarillo", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "f8DPrkYuTUPJ3cru", + "filament_id": "OFj3bTjw", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#E8C547" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Azul.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Azul.json index 7688708656..2b384f61c5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Azul.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Azul.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Azul", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "QMBocqysEed86R9y", - "filament_id": "OF5vgi2G", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#2D5DA8" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Azul", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "QMBocqysEed86R9y", + "filament_id": "OF5vgi2G", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#2D5DA8" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Beige.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Beige.json index 2324dadcc5..0a95d908ae 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Beige.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Beige.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Beige", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "XoilIv3HqpDTVRwv", - "filament_id": "OFGcLA5R", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#D8C4A0" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Beige", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "XoilIv3HqpDTVRwv", + "filament_id": "OFGcLA5R", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#D8C4A0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Blanco.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Blanco.json index 92f10acf51..26d6aa37d5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Blanco.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Blanco.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Blanco", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "xkotTQheAIUUhPd7", - "filament_id": "OFtefokm", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#F2F2EC" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Blanco", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "xkotTQheAIUUhPd7", + "filament_id": "OFtefokm", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#F2F2EC" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Bordo.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Bordo.json index 4018c1d710..9ab337468d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Bordo.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Bordo.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Bordo", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "zV2dKrknk0ThDv36", - "filament_id": "OFiDpM1B", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#6E1A2B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Bordo", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "zV2dKrknk0ThDv36", + "filament_id": "OFiDpM1B", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#6E1A2B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Celeste Cielo.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Celeste Cielo.json index ff47203106..38e041c79e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Celeste Cielo.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Celeste Cielo.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Celeste Cielo", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "UZW4F0aVz1TqstYi", - "filament_id": "OFqtx549", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#9DC8E8" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Celeste Cielo", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "UZW4F0aVz1TqstYi", + "filament_id": "OFqtx549", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#9DC8E8" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Chocolate.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Chocolate.json index b67e57db85..071bcf600e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Chocolate.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Chocolate.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Chocolate", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "DdW1XKqqRuLM1cAd", - "filament_id": "OFdzlrhi", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#4A2E22" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Chocolate", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "DdW1XKqqRuLM1cAd", + "filament_id": "OFdzlrhi", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#4A2E22" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Gris.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Gris.json index 445a44b1e4..d1615e94f2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Gris.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Gris.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Gris", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "6OtKg1UxWuNCqsZy", - "filament_id": "OFGVwfK0", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#7E7E7E" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Gris", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "6OtKg1UxWuNCqsZy", + "filament_id": "OFGVwfK0", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#7E7E7E" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Marron.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Marron.json index aa411c3d77..289b15449a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Marron.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Marron.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Marron", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "lKOXMY37q8WpMdBA", - "filament_id": "OF8jh0Lk", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#6B4226" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Marron", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "lKOXMY37q8WpMdBA", + "filament_id": "OF8jh0Lk", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#6B4226" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Naranja.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Naranja.json index 2c382c085d..e817ce8b25 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Naranja.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Naranja.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Naranja", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "MabNpNP8G9RqEruP", - "filament_id": "OFmaeU4a", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#E0662A" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Naranja", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "MabNpNP8G9RqEruP", + "filament_id": "OFmaeU4a", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#E0662A" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Negro.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Negro.json index 7ec4105a25..2827d288d7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Negro.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Negro.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Negro", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "Jwrm1uuCo7UjvgWn", - "filament_id": "OFufTAK9", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#1A1A1A" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Negro", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "Jwrm1uuCo7UjvgWn", + "filament_id": "OFufTAK9", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#1A1A1A" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Piel.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Piel.json index 6635fe8b78..641e338dea 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Piel.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Piel.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Piel", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "ifbCS3WypTUa1JHr", - "filament_id": "OFfZcoKr", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#E8C9A8" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Piel", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "ifbCS3WypTUa1JHr", + "filament_id": "OFfZcoKr", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#E8C9A8" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rojo.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rojo.json index bed097ad9a..780517616f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rojo.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rojo.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Rojo", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "ak2QX0IS74Nmtyex", - "filament_id": "OFIBXa0k", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#B5302E" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Rojo", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "ak2QX0IS74Nmtyex", + "filament_id": "OFIBXa0k", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#B5302E" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rosa.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rosa.json index 1767674916..1f5848e668 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rosa.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Rosa.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Rosa", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "GrEXuL6TYue238MK", - "filament_id": "OFausr3F", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#E07A9B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Rosa", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "GrEXuL6TYue238MK", + "filament_id": "OFausr3F", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#E07A9B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Uva.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Uva.json index 0e5bb137e1..bd12219417 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Uva.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Uva.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Uva", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "PK1CsK7AS1p1IJaR", - "filament_id": "OFEZ449N", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#5B2A6B" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Uva", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "PK1CsK7AS1p1IJaR", + "filament_id": "OFEZ449N", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#5B2A6B" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Verde.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Verde.json index 67fe0ebfee..6b9d58ddac 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Verde.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Verde.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Verde", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "rsLi8jr62hHPgERG", - "filament_id": "OFCjG251", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#3A7D44" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Verde", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "rsLi8jr62hHPgERG", + "filament_id": "OFCjG251", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#3A7D44" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Violeta.json b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Violeta.json index e842875905..1b3f32860f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Violeta.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FilAr/FilAr PLA-mate Violeta.json @@ -1,15 +1,15 @@ { - "type": "filament", - "name": "FilAr PLA-mate Violeta", - "inherits": "FilAr PLA-mate @base", - "from": "system", - "setting_id": "z2Pk06JzY9Tr1WjQ", - "filament_id": "OF2EK9F1", - "instantiation": "true", - "filament_vendor": [ - "FilAr" - ], - "default_filament_colour": [ - "#6B3FA0" - ] -} \ No newline at end of file + "type": "filament", + "name": "FilAr PLA-mate Violeta", + "inherits": "FilAr PLA-mate @base", + "from": "system", + "setting_id": "z2Pk06JzY9Tr1WjQ", + "filament_id": "OF2EK9F1", + "instantiation": "true", + "filament_vendor": [ + "FilAr" + ], + "default_filament_colour": [ + "#6B3FA0" + ] +} diff --git a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL A1.json similarity index 93% rename from resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL A1.json index 2fac503182..c283b9aafb 100644 --- a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FusRock ABS-GF @BBL A1", - "inherits": "FusRock ABS-GF @base", + "inherits": "FusRock ABS-GF @BBL base", "from": "system", - "setting_id": "GFSR00_01", + "setting_id": "AWilJGD4uphvinK0", "instantiation": "true", "filament_notes": "//EN\n1.Be sure to read it carefully before using (https://wiki.fusrock.com).\n2.When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials（https://wiki.fusrock.com）.\\n3.Thank you for choosing FusRock. \n//CN\n1.使用前请务必仔细阅读（https://wiki.fusrock.com）。\n2.打印该耗材时，可能会出现喷嘴堵塞、拉丝、翘边以及层间附着力不足等问题。为了获得更好的打印效果，请参考此维基页面：高温 / 工程材料打印技巧（https://wiki.fusrock.com）。\n3.感谢您选择FusRock。", "filament_long_retractions_when_cut": [ diff --git a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL H2D.json b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL H2D.json similarity index 95% rename from resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL H2D.json rename to resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL H2D.json index be3bdb2c40..e3bf5dfd28 100644 --- a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL H2D.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL H2D.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FusRock ABS-GF @BBL H2D", - "inherits": "FusRock ABS-GF @base", + "inherits": "FusRock ABS-GF @BBL base", "from": "system", - "setting_id": "GFSR00_03", + "setting_id": "N3PSDaJIkJdhGssG", "instantiation": "true", "chamber_temperatures": [ "60" diff --git a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL P1P.json similarity index 81% rename from resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL P1P.json index a15ebcb69c..2480c3c7be 100644 --- a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FusRock ABS-GF @BBL P1P", - "inherits": "FusRock ABS-GF @base", + "inherits": "FusRock ABS-GF @BBL base", "from": "system", - "setting_id": "GFSR00_04", + "setting_id": "mhwJGDVOG3AYawSy", "instantiation": "true", "filament_long_retractions_when_cut": [ "1" diff --git a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL X1C.json similarity index 89% rename from resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL X1C.json index 40d26ba410..0dc4a90e65 100644 --- a/resources/profiles/BBL/filament/FusRock/FusRock ABS-GF @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "FusRock ABS-GF @BBL X1C", - "inherits": "FusRock ABS-GF @base", + "inherits": "FusRock ABS-GF @BBL base", "from": "system", - "setting_id": "GFSR00_05", + "setting_id": "Gb22zRgoijThX2e8", "instantiation": "true", "filament_long_retractions_when_cut": [ "1" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL base.json new file mode 100644 index 0000000000..fda844dce3 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/FusRock/BBL/FusRock ABS-GF @BBL base.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "FusRock ABS-GF @BBL base", + "inherits": "FusRock ABS-GF @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic ABS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic ABS @System.json index e499fa3a73..bdffbd3398 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic ABS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic ABS @System.json @@ -7,5 +7,21 @@ "setting_id": "W0LP8Ah5MHMzogvV", "filament_id": "OFY9muEs", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "20", + "25", + "12", + "18", + "18" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic ASA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic ASA @System.json index f55ee5e239..4262791b9d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic ASA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic ASA @System.json @@ -7,5 +7,21 @@ "setting_id": "bcsNcj4DzLb4K5zN", "filament_id": "OFLPAxz3", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "20", + "25", + "12", + "20", + "20" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic BVOH @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic BVOH @System.json index 7b34746bb2..20445bfecb 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic BVOH @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic BVOH @System.json @@ -6,5 +6,13 @@ "setting_id": "oUpbqz3uzQqND5DG", "filament_id": "OFo2UF2C", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic CoPE @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic CoPE @System.json index 60c330fc39..19d55ea479 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic CoPE @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic CoPE @System.json @@ -6,5 +6,13 @@ "setting_id": "KlHtaJU2GM0uaRGM", "filament_id": "OFjt9en1", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic EVA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic EVA @System.json index 646bef3f28..f0c9e0e16f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic EVA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic EVA @System.json @@ -7,5 +7,13 @@ "filament_id": "OFCD8qiU", "instantiation": "true", "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic HIPS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic HIPS @System.json index c4acb079be..ff885839f9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic HIPS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic HIPS @System.json @@ -6,5 +6,21 @@ "setting_id": "A7gedcxip65DXKuf", "filament_id": "OFsFon5l", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "8", + "13", + "13", + "8", + "13", + "13" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PA @System.json index 4bea15a407..3e9b42ad65 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PA @System.json @@ -7,5 +7,21 @@ "setting_id": "9DoeedUBMRPSCyu2", "filament_id": "OFg8ndtj", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "8", + "12", + "12", + "8", + "12", + "12" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json index 0e653e5529..fdef334123 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PA-CF @System.json @@ -7,6 +7,14 @@ "setting_id": "rchW8WI6gcXuAE0V", "filament_id": "OFQLcbps", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_type": [ "PA-CF" ], diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PC @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PC @System.json index f84c7fe7b6..bd4d19e935 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PC @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PC @System.json @@ -7,5 +7,21 @@ "setting_id": "LNjv9LwZnbu7ZASC", "filament_id": "OFLakOUI", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "20", + "30", + "12", + "20", + "20" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PCTG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PCTG @System.json index 41ff08bd5c..717f111802 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PCTG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PCTG @System.json @@ -6,5 +6,21 @@ "setting_id": "21dhMVBuVwR2lzIX", "filament_id": "OFu1evlr", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "18", + "18", + "12", + "15", + "15" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PE @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PE @System.json index 210c48b77a..c8297957b4 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PE @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PE @System.json @@ -7,5 +7,13 @@ "filament_id": "OFPklMI1", "instantiation": "true", "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PE-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PE-CF @base.json index 53ca2e0f9d..a67219ac82 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PE-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PE-CF @base.json @@ -5,6 +5,14 @@ "from": "system", "filament_id": "OFd0Fv0k", "instantiation": "false", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_type": [ "PE-CF" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG @System.json index f6fb133324..8b34215571 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG @System.json @@ -7,5 +7,21 @@ "setting_id": "YiQZfhL6hH0giSHL", "filament_id": "OFYPdQJh", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "10", + "18", + "21", + "10", + "15", + "15" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json index 63472f65a0..e46645a5e1 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @System.json @@ -6,7 +6,12 @@ "setting_id": "wNH8CohYIh9y6ayx", "instantiation": "true", "filament_max_volumetric_speed": [ - "20" + "20", + "26", + "30", + "20", + "21", + "21" ], "filament_multitool_ramming_flow": [ "20" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @base.json index 173f397a49..d5557c9176 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG HF @base.json @@ -4,5 +4,13 @@ "inherits": "fdm_filament_pet", "from": "system", "filament_id": "OF7lOgYF", - "instantiation": "false" + "instantiation": "false", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json index aea01d2740..4127e51392 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @System.json @@ -15,6 +15,11 @@ "5" ], "filament_max_volumetric_speed": [ + "11.5", + "11.5", + "11.5", + "11.5", + "11.5", "11.5" ], "filament_multitool_ramming_flow": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @base.json index 8bf644a26d..13c3ab8234 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PETG-CF @base.json @@ -5,6 +5,14 @@ "from": "system", "filament_id": "OFoYSJKi", "instantiation": "false", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_type": [ "PETG-CF" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PHA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PHA @System.json index c50840c55a..d8d8b19d88 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PHA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PHA @System.json @@ -7,5 +7,13 @@ "filament_id": "OF74KeQR", "instantiation": "true", "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA @System.json index 7bf0a0e72b..c5274780f3 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA @System.json @@ -7,5 +7,21 @@ "setting_id": "RcBNzytWgwRrwXXz", "filament_id": "OFDSrzZ8", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "12", + "21", + "40", + "12", + "21", + "30" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json index ccd8205595..303ad6ac2f 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA High Speed @System.json @@ -6,11 +6,29 @@ "setting_id": "L9wOwDxavVR7vrL7", "filament_id": "OFmpMwxS", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.98", + "0.98", + "0.98", + "0.98", + "0.98", "0.98" ], "filament_max_volumetric_speed": [ - "18" + "18", + "25", + "40", + "18", + "25", + "30" ], "filament_multitool_ramming_flow": [ "25" diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json index 2bb0e98e58..a7dd869115 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @System.json @@ -6,12 +6,22 @@ "setting_id": "RFs9eCKYOMUSmvZf", "instantiation": "true", "filament_max_volumetric_speed": [ - "11" + "11", + "19.5", + "40", + "11", + "19.5", + "25" ], "filament_multitool_ramming_flow": [ "11" ], "filament_retraction_length": [ + "0.8", + "0.8", + "0.8", + "0.8", + "0.8", "0.8" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @base.json index 7fed10e48e..debc41c3ff 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Matte @base.json @@ -4,5 +4,13 @@ "inherits": "fdm_filament_pla", "from": "system", "filament_id": "OFmY0l6t", - "instantiation": "false" + "instantiation": "false", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json index 3bee7ccde6..32fbeccf4c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA Silk @System.json @@ -7,10 +7,28 @@ "setting_id": "oPkXDCBrTQB3SRm4", "filament_id": "OFesA6rF", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_max_volumetric_speed": [ + "7.5", + "7.5", + "7.5", + "7.5", + "7.5", "7.5" ], "filament_retraction_length": [ + "0.5", + "0.5", + "0.5", + "0.5", + "0.5", "0.5" ], "compatible_printers": [] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json index 972ef33800..5d7df3c446 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PLA-CF @System.json @@ -7,11 +7,32 @@ "setting_id": "l2LkEql1SVH0iRqY", "filament_id": "OFWbdGsC", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_flow_ratio": [ + "0.95", + "0.95", + "0.95", + "0.95", + "0.95", "0.95" ], "filament_type": [ "PLA-CF" ], - "compatible_printers": [] + "compatible_printers": [], + "filament_max_volumetric_speed": [ + "12", + "18", + "18", + "12", + "18", + "18" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP @System.json index 14e38bc340..869b02e807 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP @System.json @@ -7,5 +7,13 @@ "filament_id": "OF1UNk9P", "instantiation": "true", "description": "This is neither a commonly used filament, nor one of Bambu filaments, and it varies a lot from brand to brand. So, it's highly recommended to ask its vendor for suitable profile before printing and adjust some parameters according to its performances.", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json index 3f2ee9f3f0..3e55ce0703 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @System.json @@ -13,6 +13,11 @@ "1.01" ], "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", "6" ], "filament_multitool_ramming_flow": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @base.json index 1852185476..92f65b3da2 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-CF @base.json @@ -5,6 +5,14 @@ "from": "system", "filament_id": "OFXkm8q1", "instantiation": "false", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_type": [ "PP-CF" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json index d9bedf9316..101c2be4e7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @System.json @@ -13,6 +13,11 @@ "1.05" ], "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", "6" ], "filament_multitool_ramming_flow": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @base.json index 958fbc75a6..0c3873595d 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PP-GF @base.json @@ -5,6 +5,14 @@ "from": "system", "filament_id": "OFsijjtH", "instantiation": "false", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_type": [ "PP-GF" ] diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json index 99ee7acda7..33c6747a68 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-CF @System.json @@ -9,7 +9,20 @@ "fan_max_speed": [ "35" ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_max_volumetric_speed": [ + "6.5", + "6.5", + "6.5", + "6.5", + "6.5", "6.5" ], "overhang_fan_threshold": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json index 3b5e1b7583..1a93e1db6b 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PPA-GF @System.json @@ -6,7 +6,20 @@ "setting_id": "yJCAFLt5wstMgMAY", "filament_id": "OF8Tlg47", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], "filament_max_volumetric_speed": [ + "6", + "6", + "6", + "6", + "6", "6" ], "filament_type": [ diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic PVA @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic PVA @System.json index c6300423ba..bd34a8405e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic PVA @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic PVA @System.json @@ -7,5 +7,21 @@ "setting_id": "1dlLnJKh1HzQCZVJ", "filament_id": "OFDvXujf", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ], + "filament_max_volumetric_speed": [ + "4", + "4", + "4", + "4", + "4", + "4" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic SBS @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic SBS @System.json index cf5aa1a8f6..8d754ab3c7 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic SBS @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic SBS @System.json @@ -6,5 +6,13 @@ "setting_id": "fjVWcIfxaOAZHNU1", "filament_id": "OFhQfUQY", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Generic TPU @System.json b/resources/profiles/OrcaFilamentLibrary/filament/Generic TPU @System.json index c8ae9f2562..2a22351156 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/Generic TPU @System.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Generic TPU @System.json @@ -7,5 +7,13 @@ "setting_id": "D6O8IcmSe8WGqOvb", "filament_id": "OFgbpcy9", "instantiation": "true", - "compatible_printers": [] + "compatible_printers": [], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Extra High Flow", + "Bowden Standard", + "Bowden High Flow", + "Bowden Extra High Flow" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @BBL P2S.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @BBL P2S.json index b183295021..e421095237 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @BBL P2S.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @BBL P2S.json @@ -1,275 +1,289 @@ { - "type": "filament", - "name": "INSLOGIC PA6-66 @BBL P2S", - "inherits": "INSLOGIC PA6-66 @base", - "from": "system", - "setting_id": "UHHdgZgE7e8KR2GV", - "instantiation": "true", - "activate_air_filtration": [ - "1" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "close_additional_fan_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "70" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "70" - ], - "eng_plate_temp": [ - "50" - ], - "eng_plate_temp_initial_layer": [ - "50" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "60" - ], - "filament_adaptive_volumetric_speed": [ - "0" - ], - "filament_extruder_compatibility": [ - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_preheat_temperature_delta": [ - "0" - ], - "filament_tower_interface_pre_extrusion_dist": [ - "10" - ], - "filament_tower_interface_pre_extrusion_length": [ - "0" - ], - "filament_tower_ironing_area": [ - "4" - ], - "filament_tower_interface_purge_volume": [ - "20" - ], - "filament_tower_interface_print_temp": [ - "-1" - ], - "filament_density": [ - "1.10" - ], - "filament_dev_ams_drying_ams_limitations": [ - "1" - ], - "filament_dev_ams_drying_heat_distortion_temperature": [ - "90" - ], - "filament_dev_ams_drying_temperature": [ - "65", - "80", - "65", - "80" - ], - "filament_dev_ams_drying_time": [ - "12", - "12", - "12", - "12" - ], - "filament_dev_chamber_drying_bed_temperature": [ - "90.0" - ], - "filament_dev_chamber_drying_time": [ - "18" - ], - "filament_dev_drying_cooling_temperature": [ - "65" - ], - "filament_dev_drying_softening_temperature": [ - "85" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "0" - ], - "filament_flush_volumetric_speed": [ - "0" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_pre_cooling_temperature": [ - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0" - ], - "filament_prime_volume": [ - "45" - ], - "filament_prime_volume_nc": [ - "60" - ], - "filament_printable": [ - "3" - ], - "filament_ramming_travel_time_nc": [ - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_shrink": [ - "100%" - ], - "filament_soluble": [ - "0" - ], - "full_fan_speed_layer": [ - "0" - ], - "additional_fan_full_speed_layer": [ - "0" - ], - "filament_scarf_height": [ - "10%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14" - ], - "filament_change_length": [ - "10" - ], - "hot_plate_temp": [ - "50" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "overhang_fan_speed": [ - "95" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "3" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "10" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "74.2" - ], - "textured_plate_temp": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0" - ], - "filament_start_gcode": [ - "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ], - "filament_adhesiveness_category": [ - "400" - ], - "idle_temperature": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PA6-66 @BBL P2S", + "inherits": "INSLOGIC PA6-66 @base", + "from": "system", + "setting_id": "UHHdgZgE7e8KR2GV", + "instantiation": "true", + "activate_air_filtration": [ + "1", + "1" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70" + ], + "eng_plate_temp": [ + "50" + ], + "eng_plate_temp_initial_layer": [ + "50" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "filament_extruder_compatibility": [ + "0" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_preheat_temperature_delta": [ + "0", + "0" + ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_ironing_area": [ + "4" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_density": [ + "1.10" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "90" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "90.0" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_drying_cooling_temperature": [ + "65" + ], + "filament_dev_drying_softening_temperature": [ + "85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_temp_fast": [ + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_printable": [ + "3" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "full_fan_speed_layer": [ + "0" + ], + "additional_fan_full_speed_layer": [ + "0" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14" + ], + "filament_change_length": [ + "10" + ], + "hot_plate_temp": [ + "50" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "3" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "10" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "74.2" + ], + "textured_plate_temp": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "filament_start_gcode": [ + "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_adhesiveness_category": [ + "400" + ], + "idle_temperature": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @P1-X1.json index fa71bcc4b7..6a01ae3255 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-66 @P1-X1.json @@ -1,210 +1,211 @@ { - "type": "filament", - "name": "INSLOGIC PA6-66 @P1-X1", - "inherits": "INSLOGIC PA6-66 @base", - "from": "system", - "setting_id": "X6EcSgHdfuxoY1lL", - "instantiation": "true", - "cool_plate_temp": [ - "0" - ], - "eng_plate_temp": [ - "40" - ], - "hot_plate_temp": [ - "50" - ], - "textured_plate_temp": [ - "50" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "50" - ], - "textured_plate_temp_initial_layer": [ - "50" - ], - "overhang_fan_threshold": [ - "95%" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_cooling_layer_time": [ - "15" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "nozzle_temperature_initial_layer": [ - "255", - "255" - ], - "full_fan_speed_layer": [ - "2" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "60" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "2" - ], - "filament_start_gcode": [ - "; Filament gcode\n" - ], - "nozzle_temperature": [ - "255", - "255" - ], - "temperature_vitrification": [ - "70.4" - ], - "nozzle_temperature_range_low": [ - "250", - "250" - ], - "nozzle_temperature_range_high": [ - "280", - "280" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "idle_temperature": [ - "0" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PA6-66 @P1-X1", + "inherits": "INSLOGIC PA6-66 @base", + "from": "system", + "setting_id": "X6EcSgHdfuxoY1lL", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "40" + ], + "hot_plate_temp": [ + "50" + ], + "textured_plate_temp": [ + "50" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "50" + ], + "textured_plate_temp_initial_layer": [ + "50" + ], + "overhang_fan_threshold": [ + "95%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "15" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "nozzle_temperature_initial_layer": [ + "255", + "255" + ], + "full_fan_speed_layer": [ + "2" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "2" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "255", + "255" + ], + "temperature_vitrification": [ + "70.4" + ], + "nozzle_temperature_range_low": [ + "250", + "250" + ], + "nozzle_temperature_range_high": [ + "280", + "280" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "idle_temperature": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @BBL P2S.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @BBL P2S.json index 91c7c2bdbd..2e2b7b82b5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @BBL P2S.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @BBL P2S.json @@ -1,275 +1,289 @@ { - "type": "filament", - "name": "INSLOGIC PA6-CF @BBL P2S", - "inherits": "INSLOGIC PA6-CF @base", - "from": "system", - "setting_id": "Km9iCy4A8kukE0AA", - "instantiation": "true", - "activate_air_filtration": [ - "1" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "close_additional_fan_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "70" - ], - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "during_print_exhaust_fan_speed": [ - "70" - ], - "eng_plate_temp": [ - "65" - ], - "eng_plate_temp_initial_layer": [ - "65" - ], - "fan_cooling_layer_time": [ - "20" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "60" - ], - "filament_adaptive_volumetric_speed": [ - "0" - ], - "filament_extruder_compatibility": [ - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_preheat_temperature_delta": [ - "0" - ], - "filament_tower_interface_pre_extrusion_dist": [ - "10" - ], - "filament_tower_interface_pre_extrusion_length": [ - "0" - ], - "filament_tower_ironing_area": [ - "4" - ], - "filament_tower_interface_purge_volume": [ - "20" - ], - "filament_tower_interface_print_temp": [ - "-1" - ], - "filament_density": [ - "1.12" - ], - "filament_dev_ams_drying_ams_limitations": [ - "1" - ], - "filament_dev_ams_drying_heat_distortion_temperature": [ - "90" - ], - "filament_dev_ams_drying_temperature": [ - "65", - "80", - "65", - "80" - ], - "filament_dev_ams_drying_time": [ - "12", - "12", - "12", - "12" - ], - "filament_dev_chamber_drying_bed_temperature": [ - "90.0" - ], - "filament_dev_chamber_drying_time": [ - "18" - ], - "filament_dev_drying_cooling_temperature": [ - "65" - ], - "filament_dev_drying_softening_temperature": [ - "85" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_temp_fast": [ - "0" - ], - "filament_flush_volumetric_speed": [ - "0" - ], - "filament_is_support": [ - "0" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_pre_cooling_temperature": [ - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0" - ], - "filament_prime_volume": [ - "45" - ], - "filament_prime_volume_nc": [ - "60" - ], - "filament_printable": [ - "3" - ], - "filament_ramming_travel_time_nc": [ - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_shrink": [ - "100%" - ], - "filament_soluble": [ - "0" - ], - "full_fan_speed_layer": [ - "0" - ], - "additional_fan_full_speed_layer": [ - "0" - ], - "filament_scarf_height": [ - "10%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_retract_length_nc": [ - "14" - ], - "filament_change_length": [ - "10" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "nozzle_temperature_range_high": [ - "290" - ], - "nozzle_temperature_range_low": [ - "270" - ], - "overhang_fan_speed": [ - "95" - ], - "overhang_fan_threshold": [ - "10%" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "required_nozzle_HRC": [ - "3" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "slow_down_layer_time": [ - "6" - ], - "slow_down_min_speed": [ - "10" - ], - "supertack_plate_temp": [ - "0" - ], - "supertack_plate_temp_initial_layer": [ - "0" - ], - "temperature_vitrification": [ - "74.2" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0" - ], - "filament_start_gcode": [ - "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ], - "filament_adhesiveness_category": [ - "400" - ], - "idle_temperature": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PA6-CF @BBL P2S", + "inherits": "INSLOGIC PA6-CF @base", + "from": "system", + "setting_id": "Km9iCy4A8kukE0AA", + "instantiation": "true", + "activate_air_filtration": [ + "1", + "1" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70" + ], + "eng_plate_temp": [ + "65" + ], + "eng_plate_temp_initial_layer": [ + "65" + ], + "fan_cooling_layer_time": [ + "20" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "filament_extruder_compatibility": [ + "0" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_preheat_temperature_delta": [ + "0", + "0" + ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_ironing_area": [ + "4" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_density": [ + "1.12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "90" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "90.0" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_drying_cooling_temperature": [ + "65" + ], + "filament_dev_drying_softening_temperature": [ + "85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_temp_fast": [ + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_is_support": [ + "0" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_printable": [ + "3" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "full_fan_speed_layer": [ + "0" + ], + "additional_fan_full_speed_layer": [ + "0" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_retract_length_nc": [ + "14", + "14" + ], + "filament_change_length": [ + "10" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "nozzle_temperature_range_low": [ + "270" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "10%" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "required_nozzle_HRC": [ + "3" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "6" + ], + "slow_down_min_speed": [ + "10" + ], + "supertack_plate_temp": [ + "0" + ], + "supertack_plate_temp_initial_layer": [ + "0" + ], + "temperature_vitrification": [ + "74.2" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "filament_start_gcode": [ + "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_adhesiveness_category": [ + "400" + ], + "idle_temperature": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @P1-X1.json index c95e5d3f97..b50fbd38e9 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PA6-CF @P1-X1.json @@ -1,210 +1,211 @@ { - "type": "filament", - "name": "INSLOGIC PA6-CF @P1-X1", - "inherits": "INSLOGIC PA6-CF @base", - "from": "system", - "setting_id": "ky3k6Q9Fyi3QwCHL", - "instantiation": "true", - "cool_plate_temp": [ - "0" - ], - "eng_plate_temp": [ - "40" - ], - "hot_plate_temp": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "overhang_fan_threshold": [ - "95%" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_cooling_layer_time": [ - "15" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "nozzle_temperature_initial_layer": [ - "280", - "280" - ], - "full_fan_speed_layer": [ - "2" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "60" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "2" - ], - "filament_start_gcode": [ - "; Filament gcode\n" - ], - "nozzle_temperature": [ - "275", - "275" - ], - "temperature_vitrification": [ - "70.4" - ], - "nozzle_temperature_range_low": [ - "270", - "270" - ], - "nozzle_temperature_range_high": [ - "290", - "290" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "idle_temperature": [ - "0" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PA6-CF @P1-X1", + "inherits": "INSLOGIC PA6-CF @base", + "from": "system", + "setting_id": "ky3k6Q9Fyi3QwCHL", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "40" + ], + "hot_plate_temp": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "overhang_fan_threshold": [ + "95%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "15" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "nozzle_temperature_initial_layer": [ + "280", + "280" + ], + "full_fan_speed_layer": [ + "2" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "2" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "275", + "275" + ], + "temperature_vitrification": [ + "70.4" + ], + "nozzle_temperature_range_low": [ + "270", + "270" + ], + "nozzle_temperature_range_high": [ + "290", + "290" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "idle_temperature": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @BBL P2S.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @BBL P2S.json index f654aa67f8..7522dfad87 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @BBL P2S.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @BBL P2S.json @@ -1,328 +1,343 @@ { - "type": "filament", - "name": "INSLOGIC PETG Pro @BBL P2S", - "inherits": "INSLOGIC PETG Pro @base", - "from": "system", - "setting_id": "6iAMtvQjja2ZKenA", - "instantiation": "true", - "cool_plate_temp": [ - "0" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp": [ - "70" - ], - "eng_plate_temp_initial_layer": [ - "70" - ], - "fan_cooling_layer_time": [ - "25" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "60" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "hot_plate_temp": [ - "70" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature_range_high": [ - "260" - ], - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "95%" - ], - "slow_down_layer_time": [ - "8" - ], - "slow_down_min_speed": [ - "20", - "20" - ], - "textured_plate_temp": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0" - ], - "filament_flush_volumetric_speed": [ - "0" - ], - "filament_long_retractions_when_cut": [ - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "nil", - "nil" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "0" - ], - "filament_pre_cooling_temperature": [ - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0" - ], - "activate_air_filtration": [ - "0" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "close_fan_the_first_x_layers": [ - "1" - ], - "close_additional_fan_first_x_layers": [ - "3" - ], - "complete_print_exhaust_fan_speed": [ - "70" - ], - "during_print_exhaust_fan_speed": [ - "70" - ], - "filament_extruder_compatibility": [ - "0" - ], - "filament_cooling_before_tower": [ - "10", - "10" - ], - "filament_preheat_temperature_delta": [ - "0" - ], - "filament_tower_interface_pre_extrusion_dist": [ - "10" - ], - "filament_tower_interface_pre_extrusion_length": [ - "0" - ], - "filament_tower_ironing_area": [ - "4" - ], - "filament_tower_interface_purge_volume": [ - "20" - ], - "filament_tower_interface_print_temp": [ - "-1" - ], - "filament_density": [ - "1.28" - ], - "filament_dev_ams_drying_ams_limitations": [ - "1", - "0" - ], - "filament_dev_ams_drying_heat_distortion_temperature": [ - "75" - ], - "filament_dev_ams_drying_temperature": [ - "65", - "65", - "55", - "55" - ], - "filament_dev_ams_drying_time": [ - "12", - "12", - "12", - "12" - ], - "filament_dev_chamber_drying_bed_temperature": [ - "80" - ], - "filament_dev_chamber_drying_time": [ - "12.0" - ], - "filament_dev_drying_cooling_temperature": [ - "55" - ], - "filament_dev_drying_softening_temperature": [ - "60" - ], - "filament_is_support": [ - "0" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_prime_volume": [ - "45" - ], - "filament_prime_volume_nc": [ - "60" - ], - "filament_printable": [ - "3" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_shrink": [ - "100%" - ], - "filament_soluble": [ - "0" - ], - "full_fan_speed_layer": [ - "0" - ], - "additional_fan_full_speed_layer": [ - "0" - ], - "filament_scarf_height": [ - "10%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "filament_retract_length_nc": [ - "14" - ], - "filament_change_length": [ - "10" - ], - "nozzle_temperature_range_low": [ - "240" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "required_nozzle_HRC": [ - "3" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "supertack_plate_temp": [ - "70" - ], - "supertack_plate_temp_initial_layer": [ - "70" - ], - "temperature_vitrification": [ - "81" - ], - "filament_start_gcode": [ - "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" - ], - "filament_end_gcode": [ - "; filament end gcode \n\n" - ], - "filament_adhesiveness_category": [ - "300" - ], - "idle_temperature": [ - "0" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PETG Pro @BBL P2S", + "inherits": "INSLOGIC PETG Pro @base", + "from": "system", + "setting_id": "6iAMtvQjja2ZKenA", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "25" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "260" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "95%" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20", + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "nil", + "nil" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "first_x_layer_fan_speed": [ + "0" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "activate_air_filtration": [ + "0", + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "complete_print_exhaust_fan_speed": [ + "70", + "70" + ], + "during_print_exhaust_fan_speed": [ + "70", + "70" + ], + "filament_extruder_compatibility": [ + "0" + ], + "filament_cooling_before_tower": [ + "10", + "10" + ], + "filament_preheat_temperature_delta": [ + "0", + "0" + ], + "filament_tower_interface_pre_extrusion_dist": [ + "10" + ], + "filament_tower_interface_pre_extrusion_length": [ + "0" + ], + "filament_tower_ironing_area": [ + "4" + ], + "filament_tower_interface_purge_volume": [ + "20" + ], + "filament_tower_interface_print_temp": [ + "-1" + ], + "filament_density": [ + "1.28" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_chamber_drying_time": [ + "12.0" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" + ], + "filament_is_support": [ + "0" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_prime_volume": [ + "45" + ], + "filament_prime_volume_nc": [ + "60" + ], + "filament_printable": [ + "3" + ], + "filament_scarf_seam_type": [ + "none" + ], + "filament_shrink": [ + "100%" + ], + "filament_soluble": [ + "0" + ], + "full_fan_speed_layer": [ + "0" + ], + "additional_fan_full_speed_layer": [ + "0" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_retract_length_nc": [ + "14", + "14" + ], + "filament_change_length": [ + "10" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "required_nozzle_HRC": [ + "3" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "supertack_plate_temp": [ + "70" + ], + "supertack_plate_temp_initial_layer": [ + "70" + ], + "temperature_vitrification": [ + "81" + ], + "filament_start_gcode": [ + "; Filament gcode\nM145 P0 ; set airduct mode to cooling mode for cooling\nM106 P2 S255 ; turn on auxiliary fan for cooling\nM106 P3 S127 ; turn on chamber fan for cooling\nM1002 gcode_claim_action : 29\nM191 S0 ; wait for chamber temp\nM106 P2 S102 ; turn on chamber cooling fan\nM106 P10 S0 ; turn off left aux fan\nM142 P6 R30 S40 U0.3 V0.8 ; set PETG exhaust chamber autocooling\n" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_adhesiveness_category": [ + "300" + ], + "idle_temperature": [ + "0" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @P1-X1.json index 01411d237f..9269f53bc5 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PETG Pro @P1-X1.json @@ -1,210 +1,211 @@ { - "type": "filament", - "name": "INSLOGIC PETG Pro @P1-X1", - "inherits": "INSLOGIC PETG Pro @base", - "from": "system", - "setting_id": "miOBX0bGzziXI6SE", - "instantiation": "true", - "cool_plate_temp": [ - "0" - ], - "eng_plate_temp": [ - "40" - ], - "hot_plate_temp": [ - "70" - ], - "textured_plate_temp": [ - "70" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "overhang_fan_threshold": [ - "95%" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_cooling_layer_time": [ - "15" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "nozzle_temperature_initial_layer": [ - "245", - "245" - ], - "full_fan_speed_layer": [ - "2" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "60" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "2" - ], - "filament_start_gcode": [ - "; Filament gcode\n" - ], - "nozzle_temperature": [ - "245", - "245" - ], - "temperature_vitrification": [ - "70.4" - ], - "nozzle_temperature_range_low": [ - "240", - "240" - ], - "nozzle_temperature_range_high": [ - "260", - "260" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "idle_temperature": [ - "0" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PETG Pro @P1-X1", + "inherits": "INSLOGIC PETG Pro @base", + "from": "system", + "setting_id": "miOBX0bGzziXI6SE", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "40" + ], + "hot_plate_temp": [ + "70" + ], + "textured_plate_temp": [ + "70" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "overhang_fan_threshold": [ + "95%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "15" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "nozzle_temperature_initial_layer": [ + "245", + "245" + ], + "full_fan_speed_layer": [ + "2" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "2" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "245", + "245" + ], + "temperature_vitrification": [ + "70.4" + ], + "nozzle_temperature_range_low": [ + "240", + "240" + ], + "nozzle_temperature_range_high": [ + "260", + "260" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "idle_temperature": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @BBL P2S.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @BBL P2S.json index 88c69393b9..b9a4e0b377 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @BBL P2S.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @BBL P2S.json @@ -1,190 +1,190 @@ { - "type": "filament", - "name": "INSLOGIC PLA Pro @BBL P2S", - "inherits": "INSLOGIC PLA Pro @base", - "from": "system", - "setting_id": "UAd1QXW7vm9gwoEc", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_scarf_seam_type": [ - "all" - ], - "filament_scarf_height": [ - "10%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" - ], - "filament_change_length": [ - "5" - ], - "filament_prime_volume": [ - "30" - ], - "filament_start_gcode": [ - "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" - ], - "eng_plate_temp": [ - "55" - ], - "eng_plate_temp_initial_layer": [ - "55" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "nil", - "nil" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_ramming_volumetric_speed_nc": [ - "-1", - "-1" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_distances_when_cut": [ - "10", - "10" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "first_x_layer_fan_speed": [ - "40" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_pre_cooling_temperature_nc": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_ramming_travel_time_nc": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "nozzle_temperature": [ - "215", - "215" - ], - "nozzle_temperature_initial_layer": [ - "215", - "215" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "nozzle_temperature_range_low": [ - "205", - "205" - ], - "nozzle_temperature_range_high": [ - "245", - "245" - ], - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "fan_min_speed": [ - "60" - ], - "fan_max_speed": [ - "100" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab P2S 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PLA Pro @BBL P2S", + "inherits": "INSLOGIC PLA Pro @base", + "from": "system", + "setting_id": "UAd1QXW7vm9gwoEc", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_scarf_seam_type": [ + "all" + ], + "filament_scarf_height": [ + "10%" + ], + "filament_scarf_gap": [ + "0%" + ], + "filament_scarf_length": [ + "10" + ], + "filament_change_length": [ + "5" + ], + "filament_prime_volume": [ + "30" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "eng_plate_temp": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "nil", + "nil" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_ramming_volumetric_speed_nc": [ + "-1", + "-1" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_distances_when_cut": [ + "10", + "10" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "first_x_layer_fan_speed": [ + "40" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_pre_cooling_temperature_nc": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_ramming_travel_time_nc": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "nozzle_temperature": [ + "215", + "215" + ], + "nozzle_temperature_initial_layer": [ + "215", + "215" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "nozzle_temperature_range_low": [ + "205", + "205" + ], + "nozzle_temperature_range_high": [ + "245", + "245" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "fan_min_speed": [ + "60" + ], + "fan_max_speed": [ + "100" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab P2S 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @P1-X1.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @P1-X1.json index db92a68125..52cbbd3596 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @P1-X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/BBL/INSLOGIC PLA Pro @P1-X1.json @@ -1,210 +1,211 @@ { - "type": "filament", - "name": "INSLOGIC PLA Pro @P1-X1", - "inherits": "INSLOGIC PLA Pro @base", - "from": "system", - "setting_id": "InmXr3LoNKKDfnQu", - "instantiation": "true", - "cool_plate_temp": [ - "0" - ], - "eng_plate_temp": [ - "40" - ], - "hot_plate_temp": [ - "55" - ], - "textured_plate_temp": [ - "55" - ], - "cool_plate_temp_initial_layer": [ - "0" - ], - "eng_plate_temp_initial_layer": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "overhang_fan_threshold": [ - "95%" - ], - "overhang_fan_speed": [ - "100" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "3" - ], - "filament_end_gcode": [ - "; filament end gcode \n" - ], - "filament_flow_ratio": [ - "0.98", - "0.98" - ], - "reduce_fan_stop_start_freq": [ - "1" - ], - "fan_cooling_layer_time": [ - "15" - ], - "filament_density": [ - "1.2" - ], - "filament_deretraction_speed": [ - "nil", - "nil" - ], - "filament_max_volumetric_speed": [ - "12", - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_retraction_minimum_travel": [ - "nil", - "nil" - ], - "filament_retract_before_wipe": [ - "nil", - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil", - "nil" - ], - "filament_retraction_length": [ - "1", - "1" - ], - "filament_z_hop": [ - "nil", - "nil" - ], - "filament_z_hop_types": [ - "nil", - "nil" - ], - "filament_retract_restart_extra": [ - "nil", - "nil" - ], - "filament_retraction_speed": [ - "nil", - "nil" - ], - "filament_soluble": [ - "0" - ], - "filament_wipe": [ - "nil", - "nil" - ], - "filament_wipe_distance": [ - "nil", - "nil" - ], - "nozzle_temperature_initial_layer": [ - "215", - "215" - ], - "full_fan_speed_layer": [ - "2" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "60" - ], - "slow_down_min_speed": [ - "10" - ], - "slow_down_layer_time": [ - "2" - ], - "filament_start_gcode": [ - "; Filament gcode\n" - ], - "nozzle_temperature": [ - "215", - "215" - ], - "temperature_vitrification": [ - "70.4" - ], - "nozzle_temperature_range_low": [ - "205", - "205" - ], - "nozzle_temperature_range_high": [ - "245", - "245" - ], - "filament_flush_temp": [ - "0", - "0" - ], - "filament_flush_volumetric_speed": [ - "0", - "0" - ], - "filament_long_retractions_when_cut": [ - "0" - ], - "filament_ramming_volumetric_speed": [ - "-1", - "-1" - ], - "filament_retraction_distances_when_cut": [ - "nil", - "nil" - ], - "filament_extruder_variant": [ - "Direct Drive Standard", - "Direct Drive High Flow" - ], - "filament_pre_cooling_temperature": [ - "0", - "0" - ], - "filament_ramming_travel_time": [ - "0", - "0" - ], - "filament_adaptive_volumetric_speed": [ - "0", - "0" - ], - "long_retractions_when_ec": [ - "0", - "0" - ], - "retraction_distances_when_ec": [ - "0", - "0" - ], - "volumetric_speed_coefficients": [ - "0 0 0 0 0 0", - "0 0 0 0 0 0" - ], - "idle_temperature": [ - "0" - ], - "additional_cooling_fan_speed": [ - "70" - ], - "compatible_printers": [ - "Bambu Lab X1 0.4 nozzle", - "Bambu Lab X1 Carbon 0.4 nozzle", - "Bambu Lab P1S 0.4 nozzle", - "Bambu Lab X1E 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PLA Pro @P1-X1", + "inherits": "INSLOGIC PLA Pro @base", + "from": "system", + "setting_id": "InmXr3LoNKKDfnQu", + "instantiation": "true", + "cool_plate_temp": [ + "0" + ], + "eng_plate_temp": [ + "40" + ], + "hot_plate_temp": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp_initial_layer": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "overhang_fan_threshold": [ + "95%" + ], + "overhang_fan_speed": [ + "100" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_flow_ratio": [ + "0.98", + "0.98" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "fan_cooling_layer_time": [ + "15" + ], + "filament_density": [ + "1.2" + ], + "filament_deretraction_speed": [ + "nil", + "nil" + ], + "filament_max_volumetric_speed": [ + "12", + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_retraction_minimum_travel": [ + "nil", + "nil" + ], + "filament_retract_before_wipe": [ + "nil", + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil", + "nil" + ], + "filament_retraction_length": [ + "1", + "1" + ], + "filament_z_hop": [ + "nil", + "nil" + ], + "filament_z_hop_types": [ + "nil", + "nil" + ], + "filament_retract_restart_extra": [ + "nil", + "nil" + ], + "filament_retraction_speed": [ + "nil", + "nil" + ], + "filament_soluble": [ + "0" + ], + "filament_wipe": [ + "nil", + "nil" + ], + "filament_wipe_distance": [ + "nil", + "nil" + ], + "nozzle_temperature_initial_layer": [ + "215", + "215" + ], + "full_fan_speed_layer": [ + "2" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "60" + ], + "slow_down_min_speed": [ + "10" + ], + "slow_down_layer_time": [ + "2" + ], + "filament_start_gcode": [ + "; Filament gcode\n" + ], + "nozzle_temperature": [ + "215", + "215" + ], + "temperature_vitrification": [ + "70.4" + ], + "nozzle_temperature_range_low": [ + "205", + "205" + ], + "nozzle_temperature_range_high": [ + "245", + "245" + ], + "filament_flush_temp": [ + "0", + "0" + ], + "filament_flush_volumetric_speed": [ + "0", + "0" + ], + "filament_long_retractions_when_cut": [ + "0", + "0" + ], + "filament_ramming_volumetric_speed": [ + "-1", + "-1" + ], + "filament_retraction_distances_when_cut": [ + "nil", + "nil" + ], + "filament_extruder_variant": [ + "Direct Drive Standard", + "Direct Drive High Flow" + ], + "filament_pre_cooling_temperature": [ + "0", + "0" + ], + "filament_ramming_travel_time": [ + "0", + "0" + ], + "filament_adaptive_volumetric_speed": [ + "0", + "0" + ], + "long_retractions_when_ec": [ + "0", + "0" + ], + "retraction_distances_when_ec": [ + "0", + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", + "0 0 0 0 0 0" + ], + "idle_temperature": [ + "0" + ], + "additional_cooling_fan_speed": [ + "70" + ], + "compatible_printers": [ + "Bambu Lab X1 0.4 nozzle", + "Bambu Lab X1 Carbon 0.4 nozzle", + "Bambu Lab P1S 0.4 nozzle", + "Bambu Lab X1E 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-66 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-66 @base.json index 952f927479..f5eedf33d8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-66 @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-66 @base.json @@ -1,36 +1,36 @@ { - "type": "filament", - "name": "INSLOGIC PA6-66 @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OF02mnRc", - "instantiation": "false", - "filament_vendor": [ - "INSLOGIC" - ], - "filament_type": [ - "PA" - ], - "filament_density": [ - "1.08" - ], - "filament_diameter": [ - "1.75" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_soluble": [ - "0" - ], - "nozzle_temperature_range_low": [ - "250" - ], - "nozzle_temperature_range_high": [ - "280" - ], - "filament_notes": [ - "Inslogic Nylon PA6/66 TDS (20.01.2025). Nozzle sizes 0.2/0.4/0.6mm. Nozzle 250-280C. Bed 30-50C. Printing speed 50-150mm/s. Cooling fan 100%. Textured PEI Sheet. Drying 80C for 48h or 110C for 3h. TDS linear speed is not converted to filament_max_volumetric_speed." - ], - "compatible_printers": [] + "type": "filament", + "name": "INSLOGIC PA6-66 @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OF02mnRc", + "instantiation": "false", + "filament_vendor": [ + "INSLOGIC" + ], + "filament_type": [ + "PA" + ], + "filament_density": [ + "1.08" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_soluble": [ + "0" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "filament_notes": [ + "Inslogic Nylon PA6/66 TDS (20.01.2025). Nozzle sizes 0.2/0.4/0.6mm. Nozzle 250-280C. Bed 30-50C. Printing speed 50-150mm/s. Cooling fan 100%. Textured PEI Sheet. Drying 80C for 48h or 110C for 3h. TDS linear speed is not converted to filament_max_volumetric_speed." + ], + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-CF @base.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-CF @base.json index cf73d10c59..07b2ca037c 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-CF @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PA6-CF @base.json @@ -1,39 +1,39 @@ { - "type": "filament", - "name": "INSLOGIC PA6-CF @base", - "inherits": "fdm_filament_pa", - "from": "system", - "filament_id": "OFDkHRsW", - "instantiation": "false", - "filament_vendor": [ - "INSLOGIC" - ], - "filament_type": [ - "PA-CF" - ], - "filament_density": [ - "1.20" - ], - "filament_diameter": [ - "1.75" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_soluble": [ - "0" - ], - "nozzle_temperature_range_low": [ - "270" - ], - "nozzle_temperature_range_high": [ - "290" - ], - "filament_notes": [ - "Inslogic PA6-CF TDS (20.01.2025). Nozzle sizes 0.4/0.6mm. Nozzle 270-290C at 50-100mm/s. Bed 50-70C. Cooling fan 30%. Textured PEI Sheet. Drying 90C for 12h or 110C for 4h. Carbon-fiber reinforced; abrasive filament. TDS linear speed is not converted to filament_max_volumetric_speed." - ], - "compatible_printers": [], - "required_nozzle_HRC": [ - "3" - ] + "type": "filament", + "name": "INSLOGIC PA6-CF @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFDkHRsW", + "instantiation": "false", + "filament_vendor": [ + "INSLOGIC" + ], + "filament_type": [ + "PA-CF" + ], + "filament_density": [ + "1.20" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_soluble": [ + "0" + ], + "nozzle_temperature_range_low": [ + "270" + ], + "nozzle_temperature_range_high": [ + "290" + ], + "filament_notes": [ + "Inslogic PA6-CF TDS (20.01.2025). Nozzle sizes 0.4/0.6mm. Nozzle 270-290C at 50-100mm/s. Bed 50-70C. Cooling fan 30%. Textured PEI Sheet. Drying 90C for 12h or 110C for 4h. Carbon-fiber reinforced; abrasive filament. TDS linear speed is not converted to filament_max_volumetric_speed." + ], + "compatible_printers": [], + "required_nozzle_HRC": [ + "3" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PETG Pro @base.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PETG Pro @base.json index ef0e797c2a..c5ac71e563 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PETG Pro @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PETG Pro @base.json @@ -1,36 +1,36 @@ { - "type": "filament", - "name": "INSLOGIC PETG Pro @base", - "inherits": "fdm_filament_pet", - "from": "system", - "filament_id": "OFBdBfg1", - "instantiation": "false", - "filament_vendor": [ - "INSLOGIC" - ], - "filament_type": [ - "PETG" - ], - "filament_density": [ - "1.26" - ], - "filament_diameter": [ - "1.75" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_soluble": [ - "0" - ], - "nozzle_temperature_range_low": [ - "230" - ], - "nozzle_temperature_range_high": [ - "270" - ], - "filament_notes": [ - "Inslogic PETG Pro TDS (12.02.2024). Nozzle sizes 0.2/0.4/0.6mm. 230-240C at 50-100mm/s; 240-255C at 100-300mm/s; 255-270C at 300-600mm/s. Bed 60-70C. Cooling fan 100%. Bed: Smooth PEI Sheet / High Temperature Plate. Drying 50C for 4h. TDS linear speed is not converted to filament_max_volumetric_speed." - ], - "compatible_printers": [] + "type": "filament", + "name": "INSLOGIC PETG Pro @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFBdBfg1", + "instantiation": "false", + "filament_vendor": [ + "INSLOGIC" + ], + "filament_type": [ + "PETG" + ], + "filament_density": [ + "1.26" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_soluble": [ + "0" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "filament_notes": [ + "Inslogic PETG Pro TDS (12.02.2024). Nozzle sizes 0.2/0.4/0.6mm. 230-240C at 50-100mm/s; 240-255C at 100-300mm/s; 255-270C at 300-600mm/s. Bed 60-70C. Cooling fan 100%. Bed: Smooth PEI Sheet / High Temperature Plate. Drying 50C for 4h. TDS linear speed is not converted to filament_max_volumetric_speed." + ], + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PLA Pro @base.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PLA Pro @base.json index b33a37c62c..7d199cb46e 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PLA Pro @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/INSLOGIC PLA Pro @base.json @@ -1,36 +1,36 @@ { - "type": "filament", - "name": "INSLOGIC PLA Pro @base", - "inherits": "fdm_filament_pla", - "from": "system", - "filament_id": "OFvPeNbA", - "instantiation": "false", - "filament_vendor": [ - "INSLOGIC" - ], - "filament_type": [ - "PLA" - ], - "filament_density": [ - "1.20" - ], - "filament_diameter": [ - "1.75" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_soluble": [ - "0" - ], - "nozzle_temperature_range_low": [ - "195" - ], - "nozzle_temperature_range_high": [ - "220" - ], - "filament_notes": [ - "Inslogic PLA Pro TDS (12.02.2024). Nozzle sizes 0.2/0.4/0.6mm. 195-205C at 50-100mm/s; 205-220C at 100-300mm/s. Bed 50-60C. Cooling fan 100%. Bed: Textured PEI Sheet / Cool Plate. Drying 50C for 4h. TDS linear speed is not converted to filament_max_volumetric_speed." - ], - "compatible_printers": [] + "type": "filament", + "name": "INSLOGIC PLA Pro @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFvPeNbA", + "instantiation": "false", + "filament_vendor": [ + "INSLOGIC" + ], + "filament_type": [ + "PLA" + ], + "filament_density": [ + "1.20" + ], + "filament_diameter": [ + "1.75" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_soluble": [ + "0" + ], + "nozzle_temperature_range_low": [ + "195" + ], + "nozzle_temperature_range_high": [ + "220" + ], + "filament_notes": [ + "Inslogic PLA Pro TDS (12.02.2024). Nozzle sizes 0.2/0.4/0.6mm. 195-205C at 50-100mm/s; 205-220C at 100-300mm/s. Bed 50-60C. Cooling fan 100%. Bed: Textured PEI Sheet / Cool Plate. Drying 50C for 4h. TDS linear speed is not converted to filament_max_volumetric_speed." + ], + "compatible_printers": [] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-66 @Prusa CORE One.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-66 @Prusa CORE One.json index 040e1f0ff0..7fa82c8699 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-66 @Prusa CORE One.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-66 @Prusa CORE One.json @@ -1,165 +1,165 @@ { - "type": "filament", - "name": "INSLOGIC PA6-66 @Prusa CORE One", - "inherits": "INSLOGIC PA6-66 @base", - "from": "system", - "setting_id": "Kuv4zCw8jhxYOzhB", - "instantiation": "true", - "hot_plate_temp": [ - "40" - ], - "hot_plate_temp_initial_layer": [ - "40" - ], - "textured_plate_temp": [ - "40" - ], - "textured_plate_temp_initial_layer": [ - "40" - ], - "enable_overhang_bridge_fan": [ - "1" - ], - "overhang_fan_speed": [ - "100" - ], - "chamber_minimal_temperature": [ - "0" - ], - "chamber_temperature": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "0" - ], - "filament_end_gcode": [ - "; Filament-specific end gcode" - ], - "filament_flow_ratio": [ - "0.99" - ], - "fan_cooling_layer_time": [ - "100" - ], - "filament_cooling_final_speed": [ - "3.5" - ], - "filament_cooling_initial_speed": [ - "10" - ], - "filament_cooling_moves": [ - "2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_loading_speed": [ - "10" - ], - "filament_loading_speed_start": [ - "50" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], - "filament_ramming_parameters": [ - "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retract_length_toolchange": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_retract_lift_above": [ - "nil" - ], - "filament_retract_lift_below": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_restart_extra_toolchange": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_stamping_distance": [ - "45" - ], - "filament_stamping_loading_speed": [ - "29" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "100" - ], - "filament_unloading_speed_start": [ - "100" - ], - "filament_wipe": [ - "nil" - ], - "nozzle_temperature_initial_layer": [ - "265" - ], - "full_fan_speed_layer": [ - "0" - ], - "idle_temperature": [ - "170" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "slow_down_min_speed": [ - "20" - ], - "slow_down_layer_time": [ - "15" - ], - "filament_start_gcode": [ - "" - ], - "nozzle_temperature": [ - "265" - ], - "compatible_printers": [ - "Prusa CORE One 0.4 nozzle", - "Prusa CORE One L 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PA6-66 @Prusa CORE One", + "inherits": "INSLOGIC PA6-66 @base", + "from": "system", + "setting_id": "Kuv4zCw8jhxYOzhB", + "instantiation": "true", + "hot_plate_temp": [ + "40" + ], + "hot_plate_temp_initial_layer": [ + "40" + ], + "textured_plate_temp": [ + "40" + ], + "textured_plate_temp_initial_layer": [ + "40" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "overhang_fan_speed": [ + "100" + ], + "chamber_minimal_temperature": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "0" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_flow_ratio": [ + "0.99" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_restart_extra_toolchange": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_wipe": [ + "nil" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "170" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "15" + ], + "filament_start_gcode": [ + "" + ], + "nozzle_temperature": [ + "265" + ], + "compatible_printers": [ + "Prusa CORE One 0.4 nozzle", + "Prusa CORE One L 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-CF @Prusa CORE One.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-CF @Prusa CORE One.json index 790650ee23..5063ee001a 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-CF @Prusa CORE One.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PA6-CF @Prusa CORE One.json @@ -1,165 +1,165 @@ { - "type": "filament", - "name": "INSLOGIC PA6-CF @Prusa CORE One", - "inherits": "INSLOGIC PA6-CF @base", - "from": "system", - "setting_id": "ZCYSMR6VCj0IrYAF", - "instantiation": "true", - "hot_plate_temp": [ - "60" - ], - "hot_plate_temp_initial_layer": [ - "60" - ], - "textured_plate_temp": [ - "60" - ], - "textured_plate_temp_initial_layer": [ - "60" - ], - "enable_overhang_bridge_fan": [ - "1" - ], - "overhang_fan_speed": [ - "30" - ], - "chamber_minimal_temperature": [ - "0" - ], - "chamber_temperature": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "0" - ], - "filament_end_gcode": [ - "; Filament-specific end gcode" - ], - "filament_flow_ratio": [ - "0.99" - ], - "fan_cooling_layer_time": [ - "100" - ], - "filament_cooling_final_speed": [ - "3.5" - ], - "filament_cooling_initial_speed": [ - "10" - ], - "filament_cooling_moves": [ - "2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_loading_speed": [ - "10" - ], - "filament_loading_speed_start": [ - "50" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], - "filament_ramming_parameters": [ - "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retract_length_toolchange": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_retract_lift_above": [ - "nil" - ], - "filament_retract_lift_below": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_restart_extra_toolchange": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_stamping_distance": [ - "45" - ], - "filament_stamping_loading_speed": [ - "29" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "100" - ], - "filament_unloading_speed_start": [ - "100" - ], - "filament_wipe": [ - "nil" - ], - "nozzle_temperature_initial_layer": [ - "280" - ], - "full_fan_speed_layer": [ - "0" - ], - "idle_temperature": [ - "170" - ], - "fan_max_speed": [ - "30" - ], - "fan_min_speed": [ - "30" - ], - "slow_down_min_speed": [ - "20" - ], - "slow_down_layer_time": [ - "15" - ], - "filament_start_gcode": [ - "" - ], - "nozzle_temperature": [ - "280" - ], - "compatible_printers": [ - "Prusa CORE One 0.4 nozzle", - "Prusa CORE One L 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PA6-CF @Prusa CORE One", + "inherits": "INSLOGIC PA6-CF @base", + "from": "system", + "setting_id": "ZCYSMR6VCj0IrYAF", + "instantiation": "true", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "overhang_fan_speed": [ + "30" + ], + "chamber_minimal_temperature": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "0" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_flow_ratio": [ + "0.99" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_restart_extra_toolchange": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_wipe": [ + "nil" + ], + "nozzle_temperature_initial_layer": [ + "280" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "170" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "30" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "15" + ], + "filament_start_gcode": [ + "" + ], + "nozzle_temperature": [ + "280" + ], + "compatible_printers": [ + "Prusa CORE One 0.4 nozzle", + "Prusa CORE One L 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PETG Pro @Prusa CORE One.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PETG Pro @Prusa CORE One.json index 6eb05df53d..70465325c1 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PETG Pro @Prusa CORE One.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PETG Pro @Prusa CORE One.json @@ -1,165 +1,165 @@ { - "type": "filament", - "name": "INSLOGIC PETG Pro @Prusa CORE One", - "inherits": "INSLOGIC PETG Pro @base", - "from": "system", - "setting_id": "yHUGQJhN0HUa7A5V", - "instantiation": "true", - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "textured_plate_temp": [ - "65" - ], - "textured_plate_temp_initial_layer": [ - "65" - ], - "enable_overhang_bridge_fan": [ - "1" - ], - "overhang_fan_speed": [ - "100" - ], - "chamber_minimal_temperature": [ - "0" - ], - "chamber_temperature": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "0" - ], - "filament_end_gcode": [ - "; Filament-specific end gcode" - ], - "filament_flow_ratio": [ - "0.99" - ], - "fan_cooling_layer_time": [ - "100" - ], - "filament_cooling_final_speed": [ - "3.5" - ], - "filament_cooling_initial_speed": [ - "10" - ], - "filament_cooling_moves": [ - "2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_loading_speed": [ - "10" - ], - "filament_loading_speed_start": [ - "50" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], - "filament_ramming_parameters": [ - "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retract_length_toolchange": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_retract_lift_above": [ - "nil" - ], - "filament_retract_lift_below": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_restart_extra_toolchange": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_stamping_distance": [ - "45" - ], - "filament_stamping_loading_speed": [ - "29" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "100" - ], - "filament_unloading_speed_start": [ - "100" - ], - "filament_wipe": [ - "nil" - ], - "nozzle_temperature_initial_layer": [ - "250" - ], - "full_fan_speed_layer": [ - "0" - ], - "idle_temperature": [ - "170" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "slow_down_min_speed": [ - "20" - ], - "slow_down_layer_time": [ - "15" - ], - "filament_start_gcode": [ - "" - ], - "nozzle_temperature": [ - "250" - ], - "compatible_printers": [ - "Prusa CORE One 0.4 nozzle", - "Prusa CORE One L 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PETG Pro @Prusa CORE One", + "inherits": "INSLOGIC PETG Pro @base", + "from": "system", + "setting_id": "yHUGQJhN0HUa7A5V", + "instantiation": "true", + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "textured_plate_temp": [ + "65" + ], + "textured_plate_temp_initial_layer": [ + "65" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "overhang_fan_speed": [ + "100" + ], + "chamber_minimal_temperature": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "0" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_flow_ratio": [ + "0.99" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_restart_extra_toolchange": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_wipe": [ + "nil" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "170" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "15" + ], + "filament_start_gcode": [ + "" + ], + "nozzle_temperature": [ + "250" + ], + "compatible_printers": [ + "Prusa CORE One 0.4 nozzle", + "Prusa CORE One L 0.4 nozzle" + ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PLA Pro @Prusa CORE One.json b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PLA Pro @Prusa CORE One.json index f670bd71b0..6330d188c8 100644 --- a/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PLA Pro @Prusa CORE One.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/INSLOGIC/Prusa/INSLOGIC PLA Pro @Prusa CORE One.json @@ -1,165 +1,165 @@ { - "type": "filament", - "name": "INSLOGIC PLA Pro @Prusa CORE One", - "inherits": "INSLOGIC PLA Pro @base", - "from": "system", - "setting_id": "Qkscha5uuuFXbvbB", - "instantiation": "true", - "hot_plate_temp": [ - "55" - ], - "hot_plate_temp_initial_layer": [ - "55" - ], - "textured_plate_temp": [ - "55" - ], - "textured_plate_temp_initial_layer": [ - "55" - ], - "enable_overhang_bridge_fan": [ - "1" - ], - "overhang_fan_speed": [ - "100" - ], - "chamber_minimal_temperature": [ - "0" - ], - "chamber_temperature": [ - "0" - ], - "slow_down_for_layer_cooling": [ - "1" - ], - "close_fan_the_first_x_layers": [ - "0" - ], - "filament_end_gcode": [ - "; Filament-specific end gcode" - ], - "filament_flow_ratio": [ - "0.99" - ], - "fan_cooling_layer_time": [ - "100" - ], - "filament_cooling_final_speed": [ - "3.5" - ], - "filament_cooling_initial_speed": [ - "10" - ], - "filament_cooling_moves": [ - "2" - ], - "filament_deretraction_speed": [ - "nil" - ], - "filament_loading_speed": [ - "10" - ], - "filament_loading_speed_start": [ - "50" - ], - "filament_max_volumetric_speed": [ - "12" - ], - "filament_minimal_purge_on_wipe_tower": [ - "15" - ], - "filament_multitool_ramming": [ - "0" - ], - "filament_multitool_ramming_flow": [ - "10" - ], - "filament_multitool_ramming_volume": [ - "10" - ], - "filament_ramming_parameters": [ - "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" - ], - "filament_retraction_minimum_travel": [ - "nil" - ], - "filament_retract_before_wipe": [ - "nil" - ], - "filament_retract_when_changing_layer": [ - "nil" - ], - "filament_retraction_length": [ - "nil" - ], - "filament_retract_length_toolchange": [ - "nil" - ], - "filament_z_hop": [ - "nil" - ], - "filament_retract_lift_above": [ - "nil" - ], - "filament_retract_lift_below": [ - "nil" - ], - "filament_retract_restart_extra": [ - "nil" - ], - "filament_retract_restart_extra_toolchange": [ - "nil" - ], - "filament_retraction_speed": [ - "nil" - ], - "filament_stamping_distance": [ - "45" - ], - "filament_stamping_loading_speed": [ - "29" - ], - "filament_toolchange_delay": [ - "0" - ], - "filament_unloading_speed": [ - "100" - ], - "filament_unloading_speed_start": [ - "100" - ], - "filament_wipe": [ - "nil" - ], - "nozzle_temperature_initial_layer": [ - "210" - ], - "full_fan_speed_layer": [ - "0" - ], - "idle_temperature": [ - "170" - ], - "fan_max_speed": [ - "100" - ], - "fan_min_speed": [ - "100" - ], - "slow_down_min_speed": [ - "20" - ], - "slow_down_layer_time": [ - "15" - ], - "filament_start_gcode": [ - "" - ], - "nozzle_temperature": [ - "210" - ], - "compatible_printers": [ - "Prusa CORE One 0.4 nozzle", - "Prusa CORE One L 0.4 nozzle" - ] + "type": "filament", + "name": "INSLOGIC PLA Pro @Prusa CORE One", + "inherits": "INSLOGIC PLA Pro @base", + "from": "system", + "setting_id": "Qkscha5uuuFXbvbB", + "instantiation": "true", + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "enable_overhang_bridge_fan": [ + "1" + ], + "overhang_fan_speed": [ + "100" + ], + "chamber_minimal_temperature": [ + "0" + ], + "chamber_temperature": [ + "0" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "close_fan_the_first_x_layers": [ + "0" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_flow_ratio": [ + "0.99" + ], + "fan_cooling_layer_time": [ + "100" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_deretraction_speed": [ + "nil" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_multitool_ramming": [ + "0" + ], + "filament_multitool_ramming_flow": [ + "10" + ], + "filament_multitool_ramming_volume": [ + "10" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_retraction_minimum_travel": [ + "nil" + ], + "filament_retract_before_wipe": [ + "nil" + ], + "filament_retract_when_changing_layer": [ + "nil" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_retract_length_toolchange": [ + "nil" + ], + "filament_z_hop": [ + "nil" + ], + "filament_retract_lift_above": [ + "nil" + ], + "filament_retract_lift_below": [ + "nil" + ], + "filament_retract_restart_extra": [ + "nil" + ], + "filament_retract_restart_extra_toolchange": [ + "nil" + ], + "filament_retraction_speed": [ + "nil" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_toolchange_delay": [ + "0" + ], + "filament_unloading_speed": [ + "100" + ], + "filament_unloading_speed_start": [ + "100" + ], + "filament_wipe": [ + "nil" + ], + "nozzle_temperature_initial_layer": [ + "210" + ], + "full_fan_speed_layer": [ + "0" + ], + "idle_temperature": [ + "170" + ], + "fan_max_speed": [ + "100" + ], + "fan_min_speed": [ + "100" + ], + "slow_down_min_speed": [ + "20" + ], + "slow_down_layer_time": [ + "15" + ], + "filament_start_gcode": [ + "" + ], + "nozzle_temperature": [ + "210" + ], + "compatible_printers": [ + "Prusa CORE One 0.4 nozzle", + "Prusa CORE One L 0.4 nozzle" + ] } diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1 0.2 nozzle.json similarity index 88% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1 0.2 nozzle.json index 7dbd2a0536..4e7717f3bc 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL A1 0.2 nozzle", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS04_00", + "setting_id": "Ii1WcXMeEaYffOlt", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1.json index eeda187bdb..c5d9d9c5bb 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL A1", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS04", + "setting_id": "qR2dbJvfmbQBJDzR", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1M 0.2 nozzle.json similarity index 89% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1M 0.2 nozzle.json index 072a706142..5a9fcb5ad7 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL A1M 0.2 nozzle", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS05_00", + "setting_id": "zvDRrswBnEy5zN80", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1M.json similarity index 88% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1M.json index 3e67330378..8b9acfc457 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL A1M", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS05", + "setting_id": "mvL3CcSQzWhHmcug", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL P1P 0.2 nozzle.json similarity index 95% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL P1P 0.2 nozzle.json index d5582669b0..f2c1c78883 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL P1P 0.2 nozzle", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS03_00", + "setting_id": "bm0Cd4BbrflodAnD", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL P1P.json similarity index 95% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL P1P.json index 42cddbeed8..a9e5da69b6 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL P1P", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS03", + "setting_id": "E0GTBXYDb5d2jRH4", "instantiation": "true", "fan_cooling_layer_time": [ "80" diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1.json similarity index 95% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1.json index de788faca1..30c1bb19cf 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL X1", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS02", + "setting_id": "sY9tzmFIrFQKJyFw", "instantiation": "true", "filament_deretraction_speed": [ "nil", diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1C 0.2 nozzle.json similarity index 96% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1C 0.2 nozzle.json index 01d6929053..0b00b5fd71 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL X1C 0.2 nozzle", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS00_00", + "setting_id": "5pXee8UkJCi9ptVA", "instantiation": "true", "filament_max_volumetric_speed": [ "2", diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1C.json similarity index 96% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1C.json index d368e739b9..6aa8b0b279 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Numakers PLA+ @BBL X1C", - "inherits": "Numakers PLA+ @base", + "inherits": "Numakers PLA+ @BBL base", "from": "system", - "setting_id": "GFNMKS00", + "setting_id": "CPPonepBAXeRtRIN", "instantiation": "true", "filament_deretraction_speed": [ "nil", diff --git a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL base.json similarity index 51% rename from resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL base.json index b77157064b..0c42dd97d9 100644 --- a/resources/profiles/BBL/filament/Numakers/Numakers PLA+ @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Numakers/BBL/Numakers PLA+ @BBL base.json @@ -1,65 +1,65 @@ { "type": "filament", - "name": "Numakers PLA+ @base", - "inherits": "fdm_filament_pla", + "name": "Numakers PLA+ @BBL base", + "inherits": "Numakers PLA+ @base", "from": "system", - "filament_id": "OFqGRZyH", "instantiation": "false", - "filament_cost": [ - "20.99" + "close_additional_fan_first_x_layers": [ + "3" ], - "filament_density": [ - "1.24" - ], - "filament_flow_ratio": [ - "0.99" - ], - "filament_long_retractions_when_cut": [ - "1" - ], - "filament_retraction_distances_when_cut": [ - "18" - ], - "filament_max_volumetric_speed": [ - "18" - ], - "filament_vendor": [ - "Numakers" - ], - "nozzle_temperature": [ - "225" - ], - "nozzle_temperature_initial_layer": [ - "225" - ], - "nozzle_temperature_range_high": [ - "255" - ], - "nozzle_temperature_range_low": [ - "200" - ], - "filament_scarf_seam_type": [ - "none" - ], - "filament_scarf_height": [ - "10%" - ], - "filament_scarf_gap": [ - "0%" - ], - "filament_scarf_length": [ - "10" + "filament_adhesiveness_category": [ + "100" ], "filament_change_length": [ "5" ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "18" + ], "filament_prime_volume": [ "30" ], - "temperature_vitrification": [ - "55" - ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" ] } diff --git a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1 0.2 nozzle.json index 92a040235f..998c4c2958 100644 --- a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture ASA @BBL X1 0.2 nozzle", "inherits": "Overture ASA @base", "from": "system", - "setting_id": "GFOT009_07", + "setting_id": "jh7mvQEqtBbMHbbR", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1.json index 7a376a21dd..06d940632c 100644 --- a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1.json @@ -3,7 +3,7 @@ "name": "Overture ASA @BBL X1", "inherits": "Overture ASA @base", "from": "system", - "setting_id": "GFOT009_06", + "setting_id": "cRfT6znwV5A6Shfo", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1C 0.2 nozzle.json index 7fcb646a6f..04ceab67a6 100644 --- a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture ASA @BBL X1C 0.2 nozzle", "inherits": "Overture ASA @base", "from": "system", - "setting_id": "GFOT009_09", + "setting_id": "AtFqTBLGJVqukhdU", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1C.json index 721caa685f..9f080e5b90 100644 --- a/resources/profiles/BBL/filament/Overture/Overture ASA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture ASA @BBL X1C.json @@ -3,7 +3,7 @@ "name": "Overture ASA @BBL X1C", "inherits": "Overture ASA @base", "from": "system", - "setting_id": "GFOT009_08", + "setting_id": "xGrk4eFUHPepuKY3", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1 0.2 nozzle.json index ae882af557..c63f9b6992 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL A1 0.2 nozzle", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_01", + "setting_id": "hd5p80tAvLBtbLOz", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1.json index 7f14c21871..ce543127f7 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL A1", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_00", + "setting_id": "rC3OqieoVV0VVT49", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1M 0.2 nozzle.json index f0861d37c3..ff348d47d3 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL A1M 0.2 nozzle", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_03", + "setting_id": "nehgqHdfo3H5PRWD", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1M.json index 51649a3185..30d73664d4 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL A1M.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL A1M", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_02", + "setting_id": "gek0LVJsLSpW2ouh", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL P1P 0.2 nozzle.json similarity index 90% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL P1P 0.2 nozzle.json index a0d9068fe4..923ab78071 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL P1P 0.2 nozzle", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_05", + "setting_id": "epbY8jIIyn2noQd9", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL P1P.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL P1P.json index 6780f2121a..f216f29bbf 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL P1P.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL P1P", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_04", + "setting_id": "aaOFmzBat4Zx6HtZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1 0.2 nozzle.json similarity index 90% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1 0.2 nozzle.json index ba350275a1..b13bb033d6 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL X1 0.2 nozzle", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_07", + "setting_id": "cUFI1juBlncOcQf1", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1.json index bd9ecff79b..ca8b4304bc 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL X1", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_06", + "setting_id": "nYva3KRuxYikRQic", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1C 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1C 0.2 nozzle.json index 85b85b9d4a..afa578c2f3 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL X1C 0.2 nozzle", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_09", + "setting_id": "LQ99qVFxsjYsXJlK", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1C.json index f499cbc99f..66c97952f8 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Air PLA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Air PLA @BBL X1C.json @@ -3,7 +3,7 @@ "name": "Overture Air PLA @BBL X1C", "inherits": "Overture Air PLA @base", "from": "system", - "setting_id": "GFOT006_08", + "setting_id": "t9G4iW1zQGXDVa1j", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1 0.2 nozzle.json index ed140c5597..cbd95782ae 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL A1 0.2 nozzle", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_01", + "setting_id": "GyvGTwqYkGYjEFJk", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1.json index ac2df417ca..84bc7f06f5 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL A1", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_00", + "setting_id": "eBLeXUH3S3XbITJe", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1M 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1M 0.2 nozzle.json index 168d69a765..98b5074879 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL A1M 0.2 nozzle", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_03", + "setting_id": "OVU5pNwnZzjfGYmA", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1M.json similarity index 93% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1M.json index 5636c618e2..3ddca5f725 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL A1M.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL A1M", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_02", + "setting_id": "4tkz4o4Gy9Rg9pDn", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL P1P 0.2 nozzle.json index 2cfe573d05..1b0f98d600 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL P1P 0.2 nozzle", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_05", + "setting_id": "7NxD1OVmlxvWkmMF", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL P1P.json index 6f40c9c10a..1c3deabdb2 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL P1P.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL P1P", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_04", + "setting_id": "f0DPSVoUn0Q4sWDh", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1 0.2 nozzle.json index 5b21800908..affea525be 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL X1 0.2 nozzle", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_07", + "setting_id": "YSplJrX00oFk88io", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1.json index bec755226a..026a114216 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL X1", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_06", + "setting_id": "lzlcNvejwGBbieeC", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1C 0.2 nozzle.json index 75c0f762c1..9582e8f2b1 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL X1C 0.2 nozzle", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_09", + "setting_id": "RSBIHAgBtOG3hB9J", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1C.json index a7e163b13d..90297c1aee 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Easy PLA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Easy PLA @BBL X1C.json @@ -3,7 +3,7 @@ "name": "Overture Easy PLA @BBL X1C", "inherits": "Overture Easy PLA @base", "from": "system", - "setting_id": "GFOT003_08", + "setting_id": "FNdjKfYe8qGoyL01", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1 0.2 nozzle.json index 4ef6fd92eb..a0c643d5a8 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL A1 0.2 nozzle", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_01", + "setting_id": "CNG8j1OyXdsHgayH", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1.json similarity index 83% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1.json index 0ba3ff4f77..e35ad0464c 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL A1", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_00", + "setting_id": "f1psVRwfXnf2RBYX", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1M 0.2 nozzle.json index a96050f3fe..acad992f0e 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL A1M 0.2 nozzle", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_03", + "setting_id": "Czjg8dECgTCk9rmy", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1M.json similarity index 84% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1M.json index ba717d8b4b..551a2f34f9 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL A1M", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_02", + "setting_id": "awqS4tjR4dYkSEkt", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL P1P 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL P1P 0.2 nozzle.json index d1409ad106..f5f7414508 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL P1P 0.2 nozzle", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_05", + "setting_id": "cj0T92bD6kKlQCOi", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL P1P.json similarity index 82% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL P1P.json index a4074f45de..70f64ce4ba 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL P1P", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_04", + "setting_id": "dolDErUUhjBKdxrv", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1 0.2 nozzle.json index 59cf0ab335..338c4f32ae 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL X1 0.2 nozzle", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_07", + "setting_id": "J2HhpnKJq31D1dbL", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1.json similarity index 82% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1.json index fc6d7800c7..a6afdb2af4 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL X1", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_06", + "setting_id": "kcqyWA5VYsx7sCbu", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1C 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1C 0.2 nozzle.json index 82399a8d10..20f757c895 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL X1C 0.2 nozzle", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_09", + "setting_id": "pVINOtBlNRnosjC1", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1C.json index f9248c24c2..1f2ddcca38 100644 --- a/resources/profiles/BBL/filament/Overture/Overture PLA Pro @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Overture PLA Pro @BBL X1C", - "inherits": "Overture PLA Pro @base", + "inherits": "Overture PLA Pro @BBL base", "from": "system", - "setting_id": "GFOT001_08", + "setting_id": "yJ0rLSZDqfrxPimR", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL base.json new file mode 100644 index 0000000000..095c74ea7b --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture PLA Pro @BBL base.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "Overture PLA Pro @BBL base", + "inherits": "Overture PLA Pro @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1 0.2 nozzle.json index dda00766d7..9a9604bb55 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL A1 0.2 nozzle", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_01", + "setting_id": "E0qnin9rxon6Jyq7", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1.json index f7f71c6f6e..1027e13de5 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL A1", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_00", + "setting_id": "PQ9XuAMnKD9y3vgp", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1M 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1M 0.2 nozzle.json index 070f15b76d..bee6747184 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL A1M 0.2 nozzle", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_03", + "setting_id": "q3FXD5WrKqNhaLGu", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1M.json similarity index 93% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1M.json index b8ce5fb710..c56c221876 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL A1M.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL A1M", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_02", + "setting_id": "4uJnRSvdNM68meEz", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL P1P 0.2 nozzle.json index a299d81e60..26584a4de9 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL P1P 0.2 nozzle", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_05", + "setting_id": "E4iqlOBK45gpYklp", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL P1P.json index 07354aac11..4b58af1898 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL P1P.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL P1P", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_04", + "setting_id": "UIb9tBtZiKaRNopy", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1 0.2 nozzle.json index af0d62edf5..6e0e502c08 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL X1 0.2 nozzle", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_07", + "setting_id": "q4astJFFLi6KbOJl", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1.json index 036771d5d0..0829e13b6a 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL X1", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_06", + "setting_id": "PhBMG4I8ITdLQ8oV", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1C 0.2 nozzle.json index aa330205cc..b958f28bb2 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL X1C 0.2 nozzle", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_09", + "setting_id": "HnQhvIXWKZFGVNoY", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1C.json index e25071605f..84e0c9c95c 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Rock PLA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Rock PLA @BBL X1C.json @@ -3,7 +3,7 @@ "name": "Overture Rock PLA @BBL X1C", "inherits": "Overture Rock PLA @base", "from": "system", - "setting_id": "GFOT004_08", + "setting_id": "KsUAem6nMlwcev3c", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1 0.2 nozzle.json index 1c93195c36..053c01830b 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL A1 0.2 nozzle", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_01", + "setting_id": "UQsPs9GFLPdYgnMp", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1.json index 6dfdc93163..17fdb143b1 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL A1", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_00", + "setting_id": "i0iDLQw8NKSQF3Pe", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1M 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1M 0.2 nozzle.json index 2666d7f316..6cee47ecae 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL A1M 0.2 nozzle", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_03", + "setting_id": "ugplOmuNqqnsPvfO", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1M.json similarity index 93% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1M.json index d625d1453c..7a0ed2f205 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL A1M.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL A1M", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_02", + "setting_id": "AMHxNiY2PM8Hell8", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL P1P 0.2 nozzle.json index c855b5d607..098a33d064 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL P1P 0.2 nozzle", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_05", + "setting_id": "4roLiX33h7u51gl7", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL P1P.json index c744db5570..179b9caa25 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL P1P.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL P1P", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_04", + "setting_id": "Qecq5EdIXGd6JRKj", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1 0.2 nozzle.json index 2f1630fa6c..a4aefdaf23 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL X1 0.2 nozzle", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_07", + "setting_id": "Kyi1iZqSagQAzgeD", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1.json index 673407ee17..fc66735eb5 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL X1", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_06", + "setting_id": "dCmwz1TxVv1k4nrj", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1C 0.2 nozzle.json index e5ef452f46..033c200681 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL X1C 0.2 nozzle", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_09", + "setting_id": "wZZy64Zqs8K4jP9J", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1C.json index 419c96e79f..3efefaf2fc 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Silk PLA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Silk PLA @BBL X1C.json @@ -3,7 +3,7 @@ "name": "Overture Silk PLA @BBL X1C", "inherits": "Overture Silk PLA @base", "from": "system", - "setting_id": "GFOT002_08", + "setting_id": "tIykohBzOGcn12G4", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1 0.2 nozzle.json index 4ddcd5b2e2..07a2549567 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL A1 0.2 nozzle", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_01", + "setting_id": "WGfgpz40PV9Ru7Zt", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1.json index 9ce608984d..59e0030198 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL A1", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_00", + "setting_id": "f0PblNsW9q7iGZxH", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1M 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1M 0.2 nozzle.json index 709fe09c58..a90597f317 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL A1M 0.2 nozzle", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_03", + "setting_id": "kV0ZlvVhOwzTcc9u", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1M.json similarity index 93% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1M.json index 0e45b6901b..9dd8261e1e 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL A1M.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL A1M", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_02", + "setting_id": "4D70u7cXRWqDdbEN", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL P1P 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL P1P 0.2 nozzle.json index 0e425bdac8..451593ab27 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL P1P 0.2 nozzle", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_05", + "setting_id": "rdS6sZ5bnMnNVI38", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL P1P.json index 92554e2dd7..e72b63ac39 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL P1P.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL P1P", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_04", + "setting_id": "Lm4gFcVAQrwCbQpJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1 0.2 nozzle.json index 70e034c186..e86479ca76 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL X1 0.2 nozzle", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_07", + "setting_id": "rjQvmZrLs2JgPa5G", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1.json index b6c52b1ea8..e0b5a34861 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL X1", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_06", + "setting_id": "oGCZ4MSkwNzAvPbk", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1C 0.2 nozzle.json similarity index 93% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1C 0.2 nozzle.json index 51b2c733ee..df71a69633 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL X1C 0.2 nozzle", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_09", + "setting_id": "J9fImqGnYoSpSs9W", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1C.json index b6982e47a0..d82b6bec09 100644 --- a/resources/profiles/BBL/filament/Overture/Overture Super PLA+ @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture Super PLA+ @BBL X1C.json @@ -3,7 +3,7 @@ "name": "Overture Super PLA+ @BBL X1C", "inherits": "Overture Super PLA+ @base", "from": "system", - "setting_id": "GFOT005_08", + "setting_id": "Pg160F3SwSEQePIv", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1 0.2 nozzle.json index 0f6a00d64a..bd24bde2ba 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL A1 0.2 nozzle", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_01", + "setting_id": "Joam1aSO8dvTmJhx", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1.json index d9b354d6bc..cbd7a4a46f 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL A1", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_00", + "setting_id": "6ff8qgjKmzyaMfEs", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1M 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1M 0.2 nozzle.json index 43f9df80a9..37b08df2a8 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1M 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL A1M 0.2 nozzle", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_03", + "setting_id": "ivfbVD3bPoUyvP0s", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1M.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1M.json index 55be8761be..884583f481 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL A1M.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL A1M", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_02", + "setting_id": "XGXmvtOIxwC6QU6p", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL P1P 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL P1P 0.2 nozzle.json index 8f906df48d..5f67e51cb1 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL P1P 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL P1P 0.2 nozzle", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_05", + "setting_id": "Eov2TNCnSl1cmOWA", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL P1P.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL P1P.json index 9d25d70806..984b4c351c 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL P1P.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL P1P", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_04", + "setting_id": "ZqdxAsj5MYTV6Fyn", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1 0.2 nozzle.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1 0.2 nozzle.json index 1f50237b49..a60623e77d 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL X1 0.2 nozzle", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_07", + "setting_id": "YuUN1xxe8zInAObb", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1.json index 0e676f6fbf..7358d45849 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL X1", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_06", + "setting_id": "PURuOPM03EAwfxRq", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1C 0.2 nozzle.json similarity index 92% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1C 0.2 nozzle.json index 0fbae23716..88658fc933 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1C 0.2 nozzle.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL X1C 0.2 nozzle", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_09", + "setting_id": "PXWDk0asjkBa2I9g", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1C.json similarity index 94% rename from resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1C.json index 68dcbaa3fd..e8beca31f9 100644 --- a/resources/profiles/BBL/filament/Overture/Overture TPU @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Overture/BBL/Overture TPU @BBL X1C.json @@ -3,7 +3,7 @@ "name": "Overture TPU @BBL X1C", "inherits": "Overture TPU @base", "from": "system", - "setting_id": "GFOT008_08", + "setting_id": "JkPJzKrOYYS3RsnL", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA12-CF10 @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA12-CF10 @BBL X1.json index 225e12d539..520c97c01d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA12-CF10 @BBL X1.json @@ -3,7 +3,7 @@ "name": "Fiberon PA12-CF10 @BBL X1", "inherits": "Fiberon PA12-CF10 @base", "from": "system", - "setting_id": "GFSL56_00", + "setting_id": "iK97kha1pRV62Yhj", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA6-CF20 @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA6-CF20 @BBL X1.json index ce552a17e6..6d2dc16779 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA6-CF20 @BBL X1.json @@ -3,7 +3,7 @@ "name": "Fiberon PA6-CF20 @BBL X1", "inherits": "Fiberon PA6-CF20 @base", "from": "system", - "setting_id": "GFSL57_00", + "setting_id": "oXBzN409HuCA9c3X", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA6-GF25 @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA6-GF25 @BBL X1.json index 7c03b332b7..c61073f36e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA6-GF25 @BBL X1.json @@ -3,7 +3,7 @@ "name": "Fiberon PA6-GF25 @BBL X1", "inherits": "Fiberon PA6-GF25 @base", "from": "system", - "setting_id": "GFSL58_00", + "setting_id": "tv24rlJLXAHNYOrf", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA612-CF15 @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA612-CF15 @BBL X1.json index a33b87e835..fe7e671ffa 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA612-CF15 @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PA612-CF15 @BBL X1.json @@ -3,7 +3,7 @@ "name": "Fiberon PA612-CF15 @BBL X1", "inherits": "Fiberon PA612-CF15 @base", "from": "system", - "setting_id": "GFSL59_00", + "setting_id": "zsBPiVizpWSR58Ri", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PET-CF17 @BBL X1.json similarity index 96% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PET-CF17 @BBL X1.json index 4661fc9dfc..dc84326688 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PET-CF17 @BBL X1.json @@ -3,7 +3,7 @@ "name": "Fiberon PET-CF17 @BBL X1", "inherits": "Fiberon PET-CF17 @base", "from": "system", - "setting_id": "GFSL60_00", + "setting_id": "6Roq8NKQujI03Xzb", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-ESD @BBL X1.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-ESD @BBL X1.json index 6d72159532..99fcec0536 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-ESD @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-ESD @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Fiberon PETG-ESD @BBL X1", - "inherits": "Fiberon PETG-ESD @base", + "inherits": "Fiberon PETG-ESD @BBL base", "from": "system", - "setting_id": "GFSL06_01", + "setting_id": "C2HT9Y3AUpOQ1hXy", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-ESD @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-ESD @BBL base.json new file mode 100644 index 0000000000..26367622de --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-ESD @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Fiberon PETG-ESD @BBL base", + "inherits": "Fiberon PETG-ESD @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-rCF08 @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-rCF08 @BBL X1.json index 264472679c..d564918a1e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PETG-rCF08 @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Fiberon PETG-rCF08 @BBL X1.json @@ -3,7 +3,7 @@ "name": "Fiberon PETG-rCF08 @BBL X1", "inherits": "Fiberon PETG-rCF08 @base", "from": "system", - "setting_id": "GFSL61_00", + "setting_id": "jh9tJUTbisPNdlgS", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", @@ -11,39 +11,50 @@ "Bambu Lab X1 0.8 nozzle" ], "filament_deretraction_speed": [ + "nil", "nil" ], "filament_minimal_purge_on_wipe_tower": [ "15" ], "filament_retraction_minimum_travel": [ + "nil", "nil" ], "filament_retract_before_wipe": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ + "nil", "nil" ], "filament_retraction_length": [ + "nil", "nil" ], "filament_z_hop": [ + "nil", "nil" ], "filament_z_hop_types": [ + "nil", "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retraction_speed": [ + "nil", "nil" ], "filament_wipe": [ + "nil", "nil" ], "filament_wipe_distance": [ + "nil", "nil" ], "filament_start_gcode": [ @@ -53,18 +64,23 @@ "40" ], "filament_flush_temp": [ + "0", "0" ], "filament_flush_volumetric_speed": [ + "0", "0" ], "filament_long_retractions_when_cut": [ + "nil", "nil" ], "filament_ramming_volumetric_speed": [ + "-1", "-1" ], "filament_retraction_distances_when_cut": [ + "nil", "nil" ], "filament_extruder_variant": [ @@ -72,21 +88,27 @@ "Direct Drive High Flow" ], "filament_pre_cooling_temperature": [ + "0", "0" ], "filament_ramming_travel_time": [ + "0", "0" ], "filament_adaptive_volumetric_speed": [ + "0", "0" ], "long_retractions_when_ec": [ + "0", "0" ], "retraction_distances_when_ec": [ + "0", "0" ], "volumetric_speed_coefficients": [ + "0 0 0 0 0 0", "0 0 0 0 0 0" ] } diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1 0.2 nozzle.json index 17723658e1..1942059805 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL A1 0.2 nozzle", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_01", + "setting_id": "qD6JA9FtX9LlQRjY", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1.json index ec927bbc52..3949502dbe 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL A1", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_00", + "setting_id": "Lhxp7wzWfMqiUYsW", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1M 0.2 nozzle.json index 6c28307dde..9a9476b5d7 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL A1M 0.2 nozzle", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_03", + "setting_id": "XIfGqJMiptV6ZgHl", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1M.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1M.json index 4857f27375..442de47db5 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL A1M", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_02", + "setting_id": "Xovp5RS0Bd9x4zbN", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL P1P 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL P1P 0.2 nozzle.json index 902853fe07..5ad5ae0080 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL P1P 0.2 nozzle", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_05", + "setting_id": "pWCjS7hx9zYIDvqg", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL P1P.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL P1P.json index a33f7058de..d569c17314 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL P1P", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_04", + "setting_id": "1hUd7X4ZLN1fmoxj", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1 0.2 nozzle.json index fdc4ef045c..e25ca2b2aa 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL X1 0.2 nozzle", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_07", + "setting_id": "Ebl5q2HobL5n5kr0", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1.json index 2251c3a170..7da192d7d2 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL X1", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_06", + "setting_id": "ybkf8gjoxusiAQph", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1C 0.2 nozzle.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1C 0.2 nozzle.json index 5294ca84e4..e6a47c969b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL X1C 0.2 nozzle", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_09", + "setting_id": "N5ZsMGwX81KaREg0", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1C.json index 300be9e919..5c50a8898a 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma CoPE @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma CoPE @BBL X1C", - "inherits": "Panchroma CoPE @base", + "inherits": "Panchroma CoPE @BBL base", "from": "system", - "setting_id": "GFSPM016_08", + "setting_id": "bhe6owE7ZvcZR33I", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL base.json new file mode 100644 index 0000000000..8c0f134090 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma CoPE @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma CoPE @BBL base", + "inherits": "Panchroma CoPE @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1 0.2 nozzle.json index afd1a28716..960b50781c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_01", + "setting_id": "EcAyHYYBbwh0W7cv", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1.json index 8460996ce9..10dfee2329 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL A1", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_00", + "setting_id": "o66PtkUZsIhPbkHO", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1M 0.2 nozzle.json index 6dca0b3e8e..dacd19208d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_03", + "setting_id": "JNSUp4LzTjep3XoO", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1M.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1M.json index c592bdd1da..71cb670085 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL A1M", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_02", + "setting_id": "jW21lAphUo0cMqsl", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL P1P 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL P1P 0.2 nozzle.json index 35f8d181b0..4ce3915b98 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_05", + "setting_id": "Du0ZWcJNqd8W18Wh", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL P1P.json index 4f802b2f28..9bd4136dcb 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL P1P", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_04", + "setting_id": "u3UE6zNIEtdcpJab", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1 0.2 nozzle.json index 8ac58e3363..9d9cb008b2 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_07", + "setting_id": "9zGwmuNOrUdT3WNZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1.json index 836f8c4cc7..caf04702a5 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL X1", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_06", + "setting_id": "409xnlGe1IzrXIPC", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1C 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1C 0.2 nozzle.json index 25152f4be0..47977b6bc9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_09", + "setting_id": "SGPzwN6RFKai400f", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1C.json index 542d61a645..4907976e1d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA @BBL X1C", - "inherits": "Panchroma PLA @base", + "inherits": "Panchroma PLA @BBL base", "from": "system", - "setting_id": "GFSPM001_08", + "setting_id": "RXeUIZvz0rlPHaqX", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL base.json new file mode 100644 index 0000000000..678d137b88 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA @BBL base.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Panchroma PLA @BBL base", + "inherits": "Panchroma PLA @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_wipe": [ + "0" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json index f968b7e6d7..db7cecd782 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_01", + "setting_id": "rIAWIanchOslJupB", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1.json index 6a34b19049..a2c80dd6ea 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL A1", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_00", + "setting_id": "HDgCi6UfHZdjXDzr", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json index 546a9f5218..2ade265aab 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_03", + "setting_id": "7VaribjbKdvyTwD4", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M.json index 74aa730a03..93730978e9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL A1M", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_02", + "setting_id": "8ah5CAsPw9MmdkS1", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json index 1770bfc6fc..4407c9a3ab 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_05", + "setting_id": "hgz8wyLSMeGXpVfM", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P.json index 97c3558b2c..2661e9b46e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL P1P", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_04", + "setting_id": "NIFRCroV1KVjKF97", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json index 9611e74064..50ddece26e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_07", + "setting_id": "ipgwBtocyVVSwJmb", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1.json index ef1c0886e7..04e3588789 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL X1", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_06", + "setting_id": "4FFTu7rnCK2ebMUJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json index 3e31f69e9b..ef737817f1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_09", + "setting_id": "JHISMlNlBTFJaGf0", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C.json similarity index 87% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C.json index 7e2eff119c..ab2d7cb3de 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Celestial @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Celestial @BBL X1C", - "inherits": "Panchroma PLA Celestial @base", + "inherits": "Panchroma PLA Celestial @BBL base", "from": "system", - "setting_id": "GFSPM008_08", + "setting_id": "d2X6FU4NkwHHaP1f", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL base.json new file mode 100644 index 0000000000..e6519aab8a --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Celestial @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Celestial @BBL base", + "inherits": "Panchroma PLA Celestial @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json index b9a1387c7d..3365bc8122 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_01", + "setting_id": "ZrOxMUGgsizajGy5", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1.json index 2201897336..762c347447 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL A1", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_00", + "setting_id": "SBhUnTx3hn0BUZt7", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json index cae0556865..bbfc74f8a9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_03", + "setting_id": "0pWJRx7TOMdsmNMl", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M.json index 29a115d824..defebe61af 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL A1M", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_02", + "setting_id": "hdbXfBG9ybegQrYC", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json index 5b5b20ed1e..0a97e15c8c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_05", + "setting_id": "t4aSBTluntMqFXVx", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P.json index a5bda6970b..2af46fc880 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL P1P", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_04", + "setting_id": "5G4872zbCMhL2AfW", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json index 39167dd06d..3a462dcc96 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_07", + "setting_id": "cnP7n2P50AAugJIM", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1.json index c36bf6bf63..f85d6fcd68 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL X1", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_06", + "setting_id": "KkNb6pbD1nfB0hab", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json index 2e6def811d..d09e0c31a5 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_09", + "setting_id": "hw5cUrvg4USa0PGq", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C.json index 01e13b013b..f1c0770442 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Galaxy @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Galaxy @BBL X1C", - "inherits": "Panchroma PLA Galaxy @base", + "inherits": "Panchroma PLA Galaxy @BBL base", "from": "system", - "setting_id": "GFSPM007_08", + "setting_id": "DYAuEfsNR9uFeu8B", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL base.json new file mode 100644 index 0000000000..9b2179bb1f --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Galaxy @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Galaxy @BBL base", + "inherits": "Panchroma PLA Galaxy @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1 0.2 nozzle.json index dadf681d5b..4e88a9b087 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_01", + "setting_id": "yIA49PJ8keAftG2V", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1.json index 29aa7205ee..3fc88e67fc 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL A1", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_00", + "setting_id": "fekuuLTiJQoB1g7X", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json index dc9f4fab28..ea4226ed27 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_03", + "setting_id": "kbweRw9oFJKMEvDZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M.json index d07309eef6..c99f50a841 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL A1M", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_02", + "setting_id": "IknQVZ1JKDhWNjhR", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json index 3e6c0fb5d3..30dd7aeedb 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_05", + "setting_id": "PVxGiD5EsfILtoXr", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P.json index c81ef58f9c..5538a0c2e2 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL P1P", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_04", + "setting_id": "09YUARvE0trJdL9W", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1 0.2 nozzle.json index 376c88decd..312820e515 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_07", + "setting_id": "djzqnlITUbE88XaR", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1.json index 10701cfc01..1dedfbbcbe 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL X1", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_06", + "setting_id": "45ePNVRJQTB9RfK6", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json index 277e90e9f7..47e1816e91 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_09", + "setting_id": "5gNvQlBSR7uJpdfZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C.json index 1c5af79b77..a07275076d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Glow @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Glow @BBL X1C", - "inherits": "Panchroma PLA Glow @base", + "inherits": "Panchroma PLA Glow @BBL base", "from": "system", - "setting_id": "GFSPM010_08", + "setting_id": "GwpJCEpzSLf6WQPM", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL base.json new file mode 100644 index 0000000000..66685f2324 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Glow @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Glow @BBL base", + "inherits": "Panchroma PLA Glow @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json index d33e7192de..f97ab3fe9d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_01", + "setting_id": "Gm0V2yS38B73lzej", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1.json index 4da92b5a04..615c17f131 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL A1", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_00", + "setting_id": "cNayl2LdadgzGPIu", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json index 4701429827..8622522aa4 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_03", + "setting_id": "svpeogHNJpG6OJcs", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M.json index e121d53f7d..391098c405 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL A1M", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_02", + "setting_id": "eZXv92vdqjhAMw8d", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json index fd3b873bb2..df695ab23b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_05", + "setting_id": "iq98CGGzUCwjBNJ3", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P.json index f15189902b..4649b9a73e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL P1P", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_04", + "setting_id": "CyVrwfMZwfYtiqKh", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json index 1a506784f0..eb5634ab03 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_07", + "setting_id": "wLKtViV6H7LzbbzO", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1.json index db9dcf9269..5b500d904e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL X1", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_06", + "setting_id": "pbsffX1Tn2uZBQAC", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json index 98f9ce2376..da45931ab7 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_09", + "setting_id": "dBfdr3XSx2Ycs0t1", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C.json index 9134015573..013a8709e5 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Luminous @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Luminous @BBL X1C", - "inherits": "Panchroma PLA Luminous @base", + "inherits": "Panchroma PLA Luminous @BBL base", "from": "system", - "setting_id": "GFSPM011_08", + "setting_id": "FR0NsZuwXmyydY91", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL base.json new file mode 100644 index 0000000000..0cbb162fe3 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Luminous @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Luminous @BBL base", + "inherits": "Panchroma PLA Luminous @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1 0.2 nozzle.json index a5ddad4353..ae607f61e7 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_01", + "setting_id": "R6T9OGfLgYyuJQQV", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1.json index e18cf6058f..b00e3ac4d5 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL A1", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_00", + "setting_id": "74wdx9EmWTPhMgGp", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json index 298b3f0830..f73242632a 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_03", + "setting_id": "JGiyk0wyB9sND2BX", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M.json index 0cddd47a22..a694565762 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL A1M", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_02", + "setting_id": "TV9TVGXyBgKJjLj4", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json index 70b8f89852..0f233b0b14 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_05", + "setting_id": "xmuKHrKm68rk6LGG", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P.json index e67d08514c..ecf207c701 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL P1P", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_04", + "setting_id": "AiUXencnnJ8dsI3G", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1 0.2 nozzle.json index 8e8e4e4e84..a435975aed 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_07", + "setting_id": "OHXft04xIKN5AtVc", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1.json index 8f85dff8df..632b5488e7 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL X1", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_06", + "setting_id": "FTcxWNxE7TXZvX9g", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json index 6a83b160a7..7492f0474e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_09", + "setting_id": "X610ITrFop4MDa77", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C.json index f9c4181158..446522db10 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Marble @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Marble @BBL X1C", - "inherits": "Panchroma PLA Marble @base", + "inherits": "Panchroma PLA Marble @BBL base", "from": "system", - "setting_id": "GFSPM003_08", + "setting_id": "2mvGOjwoOrlKnLZD", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL base.json new file mode 100644 index 0000000000..77f862243e --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Marble @BBL base.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Panchroma PLA Marble @BBL base", + "inherits": "Panchroma PLA Marble @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1 0.2 nozzle.json index de3a7c35e1..44e22c2015 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_01", + "setting_id": "feUwXmzCUHI8Ani5", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1.json index 905b6e8624..fe82cc670d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL A1", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_00", + "setting_id": "LCcphd1X1Id1EY7i", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json index 9f0e3b708e..86618b113d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_03", + "setting_id": "U9z6EWwT6wjpR7HL", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M.json index 2bd26f4411..e359124d5b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL A1M", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_02", + "setting_id": "p7NNq8w4i95ofi0p", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json index 5f6a0bea90..56c2f2dedc 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_05", + "setting_id": "35T8Ez3Y9PToAZSa", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P.json index 4100fe84ab..55f0d71f82 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL P1P", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_04", + "setting_id": "GjYsfwFb1rjW2HWh", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1 0.2 nozzle.json index 26219eeffa..af771680cb 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_07", + "setting_id": "UIBovjt1ahFJMP3C", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1.json index 6901a33b60..b66e36e578 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL X1", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_06", + "setting_id": "iaQKkGk4P0Fmwczg", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json index 2ef1da596c..8bd5609b00 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_09", + "setting_id": "rrF1mxIIRougcDSP", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C.json index bd3d25b3e6..7f162d80bf 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Matte @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Matte @BBL X1C", - "inherits": "Panchroma PLA Matte @base", + "inherits": "Panchroma PLA Matte @BBL base", "from": "system", - "setting_id": "GFSPM002_08", + "setting_id": "K3UxBLo5EwyO5RJH", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL base.json new file mode 100644 index 0000000000..d19670cc6e --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Matte @BBL base.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Panchroma PLA Matte @BBL base", + "inherits": "Panchroma PLA Matte @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json index e0e3f84b3d..074f6328a9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_01", + "setting_id": "8oiaDU9UY2x6kI6x", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1.json index 546e7c323c..804b4c9444 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL A1", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_00", + "setting_id": "7nQYDYBd96AF3H1C", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json index deea2a43ed..103f582d97 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_03", + "setting_id": "Illg4tjxcHRlYb1n", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M.json index f96e849799..88b432b6de 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL A1M", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_02", + "setting_id": "tQfPV5JmDkRn2OOV", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json index b2b5bd7776..918f3764ea 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_05", + "setting_id": "OI3pVdKp585lQcs9", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P.json index a386ec3306..c4e7df4c22 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL P1P", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_04", + "setting_id": "jYQVdc3W3vGJfDzz", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json index c439b25f93..5c93a002aa 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_07", + "setting_id": "KbzFSFJBykP6kZkL", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1.json index ca62255017..f63b0e7852 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL X1", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_06", + "setting_id": "l5X4qdMfFoyvDsqJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json index 435ffab33f..0e871c4ae1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_09", + "setting_id": "P9tuNS2IJYvkWdgK", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C.json index bbb4f8a603..84e1cf33c8 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Metallic @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Metallic @BBL X1C", - "inherits": "Panchroma PLA Metallic @base", + "inherits": "Panchroma PLA Metallic @BBL base", "from": "system", - "setting_id": "GFSPM012_08", + "setting_id": "qHZ93iDrS0Yq0nve", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL base.json new file mode 100644 index 0000000000..aa2532e6b3 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Metallic @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Metallic @BBL base", + "inherits": "Panchroma PLA Metallic @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1 0.2 nozzle.json index 05824a933b..c916a76c59 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_01", + "setting_id": "x8Legvhy2R0I1VAs", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1.json index cfb6c3f3d3..9ace07f696 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL A1", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_00", + "setting_id": "N7SOOVeq1hiXmrKQ", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json index 268ef04f05..2db77f41f1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_03", + "setting_id": "Ptuq1zUHdeoGINzD", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M.json index d970f6b468..4df64db262 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL A1M", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_02", + "setting_id": "laH74uyf5UCItC8M", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json index e3d6d2a600..1f0450c396 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_05", + "setting_id": "MgoWnobu5p8ksS6s", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P.json index c09699ecd7..182e803ace 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL P1P", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_04", + "setting_id": "xChAJ7xQfHPMZwr0", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1 0.2 nozzle.json index 90a6ebd9e7..9214dd3848 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_07", + "setting_id": "h201yjxsJ93sqVhB", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1.json index 4a08ef9ec7..407ae307cc 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL X1", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_06", + "setting_id": "ZNx216TW1gv9bXyT", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json index 4ab620fa59..0a404b1a53 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_09", + "setting_id": "Iq6TUkH1NFn0p6Ds", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C.json index 7184cb4caf..4f133f3eda 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Neon @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Neon @BBL X1C", - "inherits": "Panchroma PLA Neon @base", + "inherits": "Panchroma PLA Neon @BBL base", "from": "system", - "setting_id": "GFSPM013_08", + "setting_id": "xeteveYJBnFTC3A9", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL base.json new file mode 100644 index 0000000000..d83b3e2009 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Neon @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Neon @BBL base", + "inherits": "Panchroma PLA Neon @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1 0.2 nozzle.json index ad7a553237..edd74d38bf 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1 0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL A1 0.2 nozzle", "renamed_from": "Panchroma PLA Stain @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_01", + "setting_id": "nQu34WPbkpyMfQ4J", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1.json index e516c24976..b19355f06c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL A1", "renamed_from": "Panchroma PLA Stain @BBL A1", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_00", + "setting_id": "91v2p9zMeGRNWX4C", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json index bc354c062d..3cc973ed27 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M 0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL A1M 0.2 nozzle", "renamed_from": "Panchroma PLA Stain @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_03", + "setting_id": "31G5dYmmEeEeDnGx", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M.json index b9698daa75..4e2a28e870 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL A1M.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL A1M", "renamed_from": "Panchroma PLA Stain @BBL A1M", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_02", + "setting_id": "h8Iw5jv0LkEsGWWC", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json index cab5e39ee6..2e664a44b2 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P 0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL P1P 0.2 nozzle", "renamed_from": "Panchroma PLA Stain @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_05", + "setting_id": "8wht7zi8DcoOFMSB", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P.json index fcb4636518..b4e3228b09 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL P1P.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL P1P", "renamed_from": "Panchroma PLA Stain @BBL P1P", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_04", + "setting_id": "7b5ZYEJp7KK75tKw", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1 0.2 nozzle.json index 2ca9056d3a..fdae5f5719 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1 0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL X1 0.2 nozzle", "renamed_from": "Panchroma PLA Stain @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_07", + "setting_id": "zRkt2fsqDlC8i8hO", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1.json index 804564f4e8..b08400c092 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL X1", "renamed_from": "Panchroma PLA Stain @BBL X1", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_06", + "setting_id": "bf2w3EzBrBkeZ2ds", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json similarity index 86% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json index ef4fe88115..a3065b143a 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C 0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL X1C 0.2 nozzle", "renamed_from": "Panchroma PLA Stain @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_09", + "setting_id": "BqsKjFUcRPWxKg7B", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C.json index 349e489fd5..e48b0812c9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Satin @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL X1C.json @@ -2,9 +2,9 @@ "type": "filament", "name": "Panchroma PLA Satin @BBL X1C", "renamed_from": "Panchroma PLA Stain @BBL X1C", - "inherits": "Panchroma PLA Satin @base", + "inherits": "Panchroma PLA Satin @BBL base", "from": "system", - "setting_id": "GFSPM005_08", + "setting_id": "dRGzGPHSG9tujLWW", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL base.json new file mode 100644 index 0000000000..aa84850f06 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Satin @BBL base.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Panchroma PLA Satin @BBL base", + "inherits": "Panchroma PLA Satin @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1 0.2 nozzle.json index 8bb018f7b1..01109cc58a 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_01", + "setting_id": "IF4pmYpCYGXFEioc", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1.json index 964735c284..34c7df8605 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL A1", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_00", + "setting_id": "BKrse8svL0dwO85f", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json index 7c667a7ce1..63f11eff05 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_03", + "setting_id": "7a6AEiNpDN8tcV9b", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M.json index ea303d2dcf..c7f7958b6d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL A1M", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_02", + "setting_id": "kB393DUVClzaxcwJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json index b66894171d..1bfeb9a8bb 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_05", + "setting_id": "1nztFtUL604XOsra", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P.json index 8523bbb0cc..49d831a1de 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL P1P", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_04", + "setting_id": "k9BIYLfdkxVgSQ6d", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1 0.2 nozzle.json index 1bf7ceab18..41368a10e4 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_07", + "setting_id": "iaoE6g4vlMos1s6D", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1.json index 8bb1c8a001..05e03e19c2 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL X1", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_06", + "setting_id": "XcR7Y0PAtTf1tH3L", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json index 592eea2e73..50812453ef 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_09", + "setting_id": "BMTCNRFG2REbt9Bh", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C.json index 632617eb41..d9eddf1f37 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Silk @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Silk @BBL X1C", - "inherits": "Panchroma PLA Silk @base", + "inherits": "Panchroma PLA Silk @BBL base", "from": "system", - "setting_id": "GFSPM004_08", + "setting_id": "mXuLnQicus3Uhhfj", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL base.json new file mode 100644 index 0000000000..43f4b10fb8 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Silk @BBL base.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Panchroma PLA Silk @BBL base", + "inherits": "Panchroma PLA Silk @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json index 973f8c99a6..b337099a21 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_01", + "setting_id": "GBzsX4zOxHFSZf2p", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1.json index 7195ee8aee..bfd4e12372 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL A1", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_00", + "setting_id": "q6gmM7NizDVBcW99", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json index c5d1f19e60..9df5de026d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_03", + "setting_id": "xywCdWs1PD3mizua", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M.json index 86702002c9..05648190e1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL A1M", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_02", + "setting_id": "94bGLG3JVHJqeuwm", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json index 47d3ca9b7c..9281a7c061 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_05", + "setting_id": "vWIBfFxUxiYs0noT", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P.json index 5a814b235b..7c8188b63f 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL P1P", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_04", + "setting_id": "SA4k2TGlvq09KgSP", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json index d9ff1754f5..9c289222ed 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_07", + "setting_id": "buWzLlidD8kqVn9M", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1.json index 6d22d51867..c30f32eb9c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL X1", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_06", + "setting_id": "iJpQBSxPtmXKX6LW", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json index 227615d682..9783999b83 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_09", + "setting_id": "3PYDMfg7fybbTYDk", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C.json index d8b4cd49ca..9192a3af91 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Starlight @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Starlight @BBL X1C", - "inherits": "Panchroma PLA Starlight @base", + "inherits": "Panchroma PLA Starlight @BBL base", "from": "system", - "setting_id": "GFSPM009_08", + "setting_id": "TPy2tnZX4boCuzTE", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL base.json new file mode 100644 index 0000000000..16c1a8bfcb --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Starlight @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Starlight @BBL base", + "inherits": "Panchroma PLA Starlight @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json index c31df860c9..18c47b256a 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_01", + "setting_id": "MhWpOISJ94dCFLkL", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1.json index 7d0a259c82..8f35932204 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL A1", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_00", + "setting_id": "afjWBIswJY3gc5LB", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json index e965532271..fe118e5196 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_03", + "setting_id": "FLjIiVwIw3hBR4zr", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M.json index b8d390ac59..847caf796d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL A1M", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_02", + "setting_id": "FnQCzJdXUvEN6UQD", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json index 18bc4ee042..f56dcd1e1c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_05", + "setting_id": "Q0sKvONnbUG681AH", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P.json index da5f9cb944..f661d2c87c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL P1P", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_04", + "setting_id": "I85PKyUlLOUrI6PX", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json index ca3d26546d..6e2cfc1a2f 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_07", + "setting_id": "t8zf48odJN0uPudJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1.json index b5c6ac4677..62a3fe9c94 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL X1", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_06", + "setting_id": "BdVwwKFmYpKF3lRd", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json index a0d88ed2a2..8d441e2155 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_09", + "setting_id": "XYFkKA5rrYglMvYM", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C.json index 904a5a8989..7912a33d33 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Temp Shift @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Temp Shift @BBL X1C", - "inherits": "Panchroma PLA Temp Shift @base", + "inherits": "Panchroma PLA Temp Shift @BBL base", "from": "system", - "setting_id": "GFSPM015_08", + "setting_id": "OlYGtaCNurO3M3sg", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL base.json new file mode 100644 index 0000000000..763d8eb6ca --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Temp Shift @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA Temp Shift @BBL base", + "inherits": "Panchroma PLA Temp Shift @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json index 0078623ce2..76ded72324 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_01", + "setting_id": "zDyzNmefpuxJCUf1", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1.json index aaa1caeb72..267542b75b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL A1", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_00", + "setting_id": "oJpOjk6xOr69m72O", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json index f8c904ca5a..f8d9c88a56 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_03", + "setting_id": "pJn7qO8UafWUd7bK", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M.json index af56eb9d0b..c98588964b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL A1M", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_02", + "setting_id": "P0oMTDXeotLr88q3", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json index d184549271..8accf85cd7 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_05", + "setting_id": "yLrxM4mMZK4Fnbix", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P.json index 7c6352f796..121ce473fc 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL P1P", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_04", + "setting_id": "NlLnaah4H9VBmrg5", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json index 5e6459dab2..8740aacf3b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_07", + "setting_id": "h0XL2rQLSJDH201O", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1.json index e4c5264897..e47becd271 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL X1", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_06", + "setting_id": "jwYkduo5MDavMoAq", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json index 7de90acf15..c97b449e17 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_09", + "setting_id": "lYVGQR5ASM1xcY5x", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C.json index a7b9f9d960..9b96d50f32 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA Translucent @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA Translucent @BBL X1C", - "inherits": "Panchroma PLA Translucent @base", + "inherits": "Panchroma PLA Translucent @BBL base", "from": "system", - "setting_id": "GFSPM006_08", + "setting_id": "8wamrzX02dIlNwyB", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL base.json new file mode 100644 index 0000000000..de3edbb787 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA Translucent @BBL base.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "Panchroma PLA Translucent @BBL base", + "inherits": "Panchroma PLA Translucent @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json index ad46ce3ca8..73bad6fa61 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL A1 0.2 nozzle", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_01", + "setting_id": "7TCFz5BoNlzot5qI", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1.json index ebc5d11ea1..de81558654 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL A1", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_00", + "setting_id": "oc0d9P8i9ayTXhbo", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json index f69f8986f1..3489fcc0a0 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL A1M 0.2 nozzle", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_03", + "setting_id": "wWQ8UeVEjOFGNcF0", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M.json index 2d62c7b9bd..abfa010e9e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL A1M", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_02", + "setting_id": "EIduHLHB0VdCzUaZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json index 7781c4576e..c01a00df0c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL P1P 0.2 nozzle", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_05", + "setting_id": "D27EcyIrV9yzFJTU", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P.json index 795fa3ded8..22b64cd805 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL P1P", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_04", + "setting_id": "ek4lPfBD7JS3B4rK", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json index 2fd8082b4a..b45a366ed1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL X1 0.2 nozzle", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_07", + "setting_id": "HoU6Q2qUtDHDhP8L", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1.json index c2bc0b9eda..b0fbc37193 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL X1", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_06", + "setting_id": "hVSsizCHzMJgGpZt", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json similarity index 85% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json index 3fa53d3985..744e3e941b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL X1C 0.2 nozzle", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_09", + "setting_id": "aZKuZsTTX3GQP0uE", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C.json index db9a5a9da0..69a4e897a2 100644 --- a/resources/profiles/BBL/filament/Polymaker/Panchroma PLA UV Shift @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Panchroma PLA UV Shift @BBL X1C", - "inherits": "Panchroma PLA UV Shift @base", + "inherits": "Panchroma PLA UV Shift @BBL base", "from": "system", - "setting_id": "GFSPM014_08", + "setting_id": "0PPfIX4yL8BoCdD1", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL base.json new file mode 100644 index 0000000000..a3e099410e --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Panchroma PLA UV Shift @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Panchroma PLA UV Shift @BBL base", + "inherits": "Panchroma PLA UV Shift @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL A1.json index b45a5cbad4..8f5acc37e9 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyLite CosPLA @BBL A1", "inherits": "PolyLite CosPLA @base", "from": "system", - "setting_id": "GFSL62_00", + "setting_id": "RZYqtQDR4zIvSrXg", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL A1M.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL A1M.json index 679b39ff18..4f7eaba197 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyLite CosPLA @BBL A1M", "inherits": "PolyLite CosPLA @base", "from": "system", - "setting_id": "GFSL62_01", + "setting_id": "yNMQPBXRPOdpkuiG", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL P1P.json index ef0e9ae3a6..2f5b93746f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyLite CosPLA @BBL P1P", "inherits": "PolyLite CosPLA @base", "from": "system", - "setting_id": "GFSL62_02", + "setting_id": "jvptdmELTscDj8ay", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL X1.json index 7442729e32..5bbf9ff1b1 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite CosPLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite CosPLA @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyLite CosPLA @BBL X1", "inherits": "PolyLite CosPLA @base", "from": "system", - "setting_id": "GFSL62_03", + "setting_id": "2kR4lOogidryispD", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1.json index feee6effdb..d324c766bc 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Galaxy @BBL A1", "inherits": "PolyLite PLA Galaxy @base", "from": "system", - "setting_id": "GFSL63_00", + "setting_id": "BLC6OE9zCj7LjJjp", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1M.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1M.json index e7e4f70f23..f87860f55d 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Galaxy @BBL A1M", "inherits": "PolyLite PLA Galaxy @base", "from": "system", - "setting_id": "GFSL63_01", + "setting_id": "FNCJtFwvh9M7HyuM", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL P1P.json index 5c29bee1f3..ea0c64e419 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Galaxy @BBL P1P", "inherits": "PolyLite PLA Galaxy @base", "from": "system", - "setting_id": "GFSL63_02", + "setting_id": "8BCbg87dmo5amtRg", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL X1.json index 5442a29906..f2dacc4ca3 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Galaxy @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Galaxy @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Galaxy @BBL X1", "inherits": "PolyLite PLA Galaxy @base", "from": "system", - "setting_id": "GFSL63_03", + "setting_id": "2kfI9rkYF93LpNRd", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1.json index 3c9a455cae..be691b2ace 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Glow @BBL A1", "inherits": "PolyLite PLA Glow @base", "from": "system", - "setting_id": "GFSL64_00", + "setting_id": "qn7H5PN0KgMm8Ee6", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1M.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1M.json index 205722c3d2..853fce1442 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Glow @BBL A1M", "inherits": "PolyLite PLA Glow @base", "from": "system", - "setting_id": "GFSL64_01", + "setting_id": "IVp9am7BOL6CAN5z", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL P1P.json index 2c67c2098b..c009583f3d 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Glow @BBL P1P", "inherits": "PolyLite PLA Glow @base", "from": "system", - "setting_id": "GFSL64_02", + "setting_id": "RHZanpy7EGdGAtF3", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL X1.json index 932e217ee5..066db3d6e6 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Glow @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Glow @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Glow @BBL X1", "inherits": "PolyLite PLA Glow @base", "from": "system", - "setting_id": "GFSL64_03", + "setting_id": "Awxx4RSqrQAIhEFv", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1.json index 7b9b747ad1..53b45dbd2f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Luminous @BBL A1", "inherits": "PolyLite PLA Luminous @base", "from": "system", - "setting_id": "GFSL65_00", + "setting_id": "97DOrlNHiPMMGWR5", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1M.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1M.json index f6a84a52cb..d756a5516d 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Luminous @BBL A1M", "inherits": "PolyLite PLA Luminous @base", "from": "system", - "setting_id": "GFSL65_01", + "setting_id": "LOv2b9kaKYXUJIrJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL P1P.json index c89622dd47..147fa2c3f2 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Luminous @BBL P1P", "inherits": "PolyLite PLA Luminous @base", "from": "system", - "setting_id": "GFSL65_02", + "setting_id": "2wls9L4EqRFiGypv", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL X1.json index d9cca17665..4795f26970 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Luminous @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Luminous @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Luminous @BBL X1", "inherits": "PolyLite PLA Luminous @base", "from": "system", - "setting_id": "GFSL65_03", + "setting_id": "gp70NZoz5qCgHz5k", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1.json index c54ed61ca9..5636638102 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Neon @BBL A1", "inherits": "PolyLite PLA Neon @base", "from": "system", - "setting_id": "GFSL66_00", + "setting_id": "hwWKjnndkCU3SlEZ", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1M.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1M.json index b324cfd9bf..52c2899c98 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Neon @BBL A1M", "inherits": "PolyLite PLA Neon @base", "from": "system", - "setting_id": "GFSL66_01", + "setting_id": "CA5E5Q1TA87iSWzO", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL P1P.json index 79e994ecc4..a52ec2c4e7 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Neon @BBL P1P", "inherits": "PolyLite PLA Neon @base", "from": "system", - "setting_id": "GFSL66_02", + "setting_id": "N5UTXT19kDfbXFzU", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL X1.json index 6cc2023b3b..d915656d02 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Neon @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Neon @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Neon @BBL X1", "inherits": "PolyLite PLA Neon @base", "from": "system", - "setting_id": "GFSL66_03", + "setting_id": "sUxGOFvUcbomrJPf", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1 0.2 nozzle.json index 0ff17288b1..5ffa8cadb5 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL A1 0.2 nozzle", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_01", + "setting_id": "7nuAyrO27zNpg9wf", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1.json index ec9d964a24..a84d5e6e4a 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL A1", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_00", + "setting_id": "BHoc6AnMAH5K74Aj", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json index f054661b8a..4c40ae1a7f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL A1M 0.2 nozzle", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_03", + "setting_id": "dDZvDBIEzJ09HaIY", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M.json index b2cec16452..6878b2883b 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL A1M", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_02", + "setting_id": "tvVT77ReLWwXVJ94", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json index f68cec25ac..6feb074149 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL P1P 0.2 nozzle", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_05", + "setting_id": "DQXQkdBzvuKYGgwy", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P.json index ebbcb11a4d..23d88dc5e3 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL P1P", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_04", + "setting_id": "4UouP8fbyytuGEh9", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1 0.2 nozzle.json index 5c160455d3..28c725b198 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL X1 0.2 nozzle", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_07", + "setting_id": "LhJeeHkaASQEVjTn", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1.json index 1edee961a4..ba78098938 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL X1", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_06", + "setting_id": "YcS2HQfu2ryGKNjU", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json index 66a6b1361b..5bda0d2371 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL X1C 0.2 nozzle", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_09", + "setting_id": "ZV4GAHpitfQoTpCI", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C.json index 95e83272ee..c8d422f0e9 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Pro @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "PolyLite PLA Pro @BBL X1C", - "inherits": "PolyLite PLA Pro @base", + "inherits": "PolyLite PLA Pro @BBL base", "from": "system", - "setting_id": "GFSPM019_08", + "setting_id": "4srNqDfqtDziN7qV", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL base.json new file mode 100644 index 0000000000..ed50abf183 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Pro @BBL base.json @@ -0,0 +1,56 @@ +{ + "type": "filament", + "name": "PolyLite PLA Pro @BBL base", + "inherits": "PolyLite PLA Pro @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1.json index 8e1425278b..5d52618010 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Starlight @BBL A1", "inherits": "PolyLite PLA Starlight @base", "from": "system", - "setting_id": "GFSL67_00", + "setting_id": "x3HpVqx9XW9lbRqW", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1M.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1M.json index ecb482cdcb..35b02ad63b 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Starlight @BBL A1M", "inherits": "PolyLite PLA Starlight @base", "from": "system", - "setting_id": "GFSL67_01", + "setting_id": "s9Bt0isdVCbdSW0F", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL P1P.json index 0f7210a5cc..a863663828 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Starlight @BBL P1P", "inherits": "PolyLite PLA Starlight @base", "from": "system", - "setting_id": "GFSL67_02", + "setting_id": "00qUK2jehjtj3TGx", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL X1.json index 88d436c526..3ba8df3c03 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Starlight @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Starlight @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Starlight @BBL X1", "inherits": "PolyLite PLA Starlight @base", "from": "system", - "setting_id": "GFSL67_03", + "setting_id": "DKJZNSTf5GsaaIGh", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1.json index 6664212a43..ddbfc08f77 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Translucent @BBL A1", "inherits": "PolyLite PLA Translucent @base", "from": "system", - "setting_id": "GFSL68_00", + "setting_id": "dHceYRjzcwzLsj0x", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1M.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1M.json index 7b20e40ce1..61dbdfaaf9 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Translucent @BBL A1M", "inherits": "PolyLite PLA Translucent @base", "from": "system", - "setting_id": "GFSL68_01", + "setting_id": "OdzH7quFslZrWu4D", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL P1P.json index f3f3198158..3c990bc685 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Translucent @BBL P1P", "inherits": "PolyLite PLA Translucent @base", "from": "system", - "setting_id": "GFSL68_02", + "setting_id": "JRp3eQU5ss6L3c1q", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL X1.json index f67db0a271..d3df5df701 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyLite PLA Translucent @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyLite PLA Translucent @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyLite PLA Translucent @BBL X1", "inherits": "PolyLite PLA Translucent @base", "from": "system", - "setting_id": "GFSL68_03", + "setting_id": "bb3M8zXSY90Q1itv", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1.json index 9bda6808d9..15a9b254cb 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA Marble @BBL A1", "inherits": "PolyTerra PLA Marble @base", "from": "system", - "setting_id": "GFSL69_00", + "setting_id": "Ni47TgOKsSs85PJE", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1M.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1M.json index 721e0b3d3d..6b8267439f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA Marble @BBL A1M", "inherits": "PolyTerra PLA Marble @base", "from": "system", - "setting_id": "GFSL69_01", + "setting_id": "Kson0GJmt8ntF4YI", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL P1P.json similarity index 90% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL P1P.json index 5dedafd5ff..55c7b5303f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA Marble @BBL P1P", "inherits": "PolyTerra PLA Marble @base", "from": "system", - "setting_id": "GFSL69_02", + "setting_id": "aWpbrCSSX38lHCnA", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL X1.json similarity index 91% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL X1.json index 8a47922219..e8f9e60ac7 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA Marble @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA Marble @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA Marble @BBL X1", "inherits": "PolyTerra PLA Marble @base", "from": "system", - "setting_id": "GFSL69_03", + "setting_id": "O7XwxOsxwFvLmnpP", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1.json index 08ace4c6a5..d425ce94e2 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA+ @BBL A1", "inherits": "PolyTerra PLA+ @base", "from": "system", - "setting_id": "GFSL70_00", + "setting_id": "dUlbwjCqWtjlCvnm", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1M.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1M.json index 86f3ab3ffb..956956002f 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL A1M.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA+ @BBL A1M", "inherits": "PolyTerra PLA+ @base", "from": "system", - "setting_id": "GFSL70_01", + "setting_id": "0JDQqqSmuHYSyw96", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL P1P.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL P1P.json index dd09d09637..3207cd79a9 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL P1P.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA+ @BBL P1P", "inherits": "PolyTerra PLA+ @base", "from": "system", - "setting_id": "GFSL70_02", + "setting_id": "0OM8MaObnp4YapKh", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL X1.json similarity index 89% rename from resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL X1.json index a28a8d30d8..17067e580a 100644 --- a/resources/profiles/BBL/filament/Polymaker/PolyTerra PLA+ @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/PolyTerra PLA+ @BBL X1.json @@ -3,7 +3,7 @@ "name": "PolyTerra PLA+ @BBL X1", "inherits": "PolyTerra PLA+ @base", "from": "system", - "setting_id": "GFSL70_03", + "setting_id": "g8UtZo9rzucrDDRO", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1 0.2 nozzle.json index ed5963f237..5512413504 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL A1 0.2 nozzle", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_01", + "setting_id": "slYmT9dA3LLqD0be", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1.json index 1b56b76099..f1bf555ba4 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL A1", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_00", + "setting_id": "zVgRM5YBqLHPK4GW", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json index 77c6eb8c4f..dc1e605560 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL A1M 0.2 nozzle", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_03", + "setting_id": "jsAUYwGfSOhSbD4j", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M.json index d2658cdaaf..8b143fb54c 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL A1M", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_02", + "setting_id": "wu8GY5oLKYeRmTBz", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json index a17c2cca66..b7601df909 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL P1P 0.2 nozzle", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_05", + "setting_id": "i9pO3z5aKKpG2Bzx", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P.json index 249eb1f3be..0482c25ee3 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL P1P", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_04", + "setting_id": "AnMfPI9uXHGmULQB", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1 0.2 nozzle.json index e5480765e3..28254af5ba 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL X1 0.2 nozzle", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_07", + "setting_id": "Oc91jGuSipSzgUfJ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1.json index 2e94b04dc7..bb1dde93c6 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL X1", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_06", + "setting_id": "lHSGRJDnVnktPC00", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json index 1f60d42cc1..e236a3d94e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL X1C 0.2 nozzle", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_09", + "setting_id": "MTp1xeVFrOKH0i0c", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C.json similarity index 88% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C.json index 04257c17e7..09bf02b13f 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA @BBL X1C", - "inherits": "Polymaker HT-PLA @base", + "inherits": "Polymaker HT-PLA @BBL base", "from": "system", - "setting_id": "GFSPM017_08", + "setting_id": "2GENTxe0e6vil9B1", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL base.json new file mode 100644 index 0000000000..e9ffeb7382 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA @BBL base.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA @BBL base", + "inherits": "Polymaker HT-PLA @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json similarity index 81% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json index 5bdd8b529b..6e04d7cd01 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL A1 0.2 nozzle", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_01", + "setting_id": "kZzdx6ZKazTMyAFO", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1.json index 042880d506..e4fb10f2cb 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL A1", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_00", + "setting_id": "5utdPhp0IJwPR4UM", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json index 3a67107ed5..2bd90b6671 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL A1M 0.2 nozzle", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_03", + "setting_id": "BWfRU15xATzKPSDq", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M.json similarity index 84% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M.json index e3dff1d4fc..14d0860498 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL A1M.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL A1M.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL A1M", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_02", + "setting_id": "cmE8Id8aqjJnEQOC", "instantiation": "true", "compatible_printers": [ "Bambu Lab A1 mini 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json index a77c921c4f..6230d2266f 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL P1P 0.2 nozzle", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_05", + "setting_id": "qRNDKVWDQjvhsbRk", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P.json index 4ac3029cc8..432b4540b9 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL P1P.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL P1P.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL P1P", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_04", + "setting_id": "WQ9Ie36OxVWVMZTs", "instantiation": "true", "compatible_printers": [ "Bambu Lab P1P 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json similarity index 80% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json index 990f68be15..6ac4908f51 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL X1 0.2 nozzle", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_07", + "setting_id": "VVzPI5haSYrbQSwt", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.2 nozzle" diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1.json similarity index 82% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1.json index d8052b99a8..3d02b62c3b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL X1", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_06", + "setting_id": "Zd7H1E7L2dB9wec4", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 0.4 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json similarity index 83% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json index c4c95ccca8..37e860c8a1 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL X1C 0.2 nozzle", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_09", + "setting_id": "LdFkOELESgEZ2hxP", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.2 nozzle", diff --git a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C.json similarity index 87% rename from resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C.json index 0d12e2b887..212387a20d 100644 --- a/resources/profiles/BBL/filament/Polymaker/Polymaker HT-PLA-GF @BBL X1C.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL X1C.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Polymaker HT-PLA-GF @BBL X1C", - "inherits": "Polymaker HT-PLA-GF @base", + "inherits": "Polymaker HT-PLA-GF @BBL base", "from": "system", - "setting_id": "GFSPM018_08", + "setting_id": "Y9702HoKQefN1etQ", "instantiation": "true", "compatible_printers": [ "Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL base.json new file mode 100644 index 0000000000..55f7b14d94 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/BBL/Polymaker HT-PLA-GF @BBL base.json @@ -0,0 +1,71 @@ +{ + "type": "filament", + "name": "Polymaker HT-PLA-GF @BBL base", + "inherits": "Polymaker HT-PLA-GF @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "hot_plate_temp": [ + "55" + ], + "hot_plate_temp_initial_layer": [ + "55" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF10 @base.json similarity index 54% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF10 @base.json index 674d5acb38..299b26856b 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA12-CF10 @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA12-CF10 @base.json @@ -73,5 +73,50 @@ ], "textured_plate_temp_initial_layer": [ "40" + ], + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "400" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "165" + ], + "filament_dev_drying_cooling_temperature": [ + "150" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_drying_softening_temperature": [ + "150" ] } diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF20 @base.json similarity index 54% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF20 @base.json index f28ee154b8..6b12a9a40e 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-CF20 @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-CF20 @base.json @@ -70,5 +70,50 @@ ], "textured_plate_temp_initial_layer": [ "40" + ], + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "400" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "165" + ], + "filament_dev_drying_cooling_temperature": [ + "150" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_drying_softening_temperature": [ + "150" ] } diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF25 @base.json similarity index 54% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF25 @base.json index 426e4175db..6160c94714 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PA6-GF25 @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA6-GF25 @base.json @@ -73,5 +73,50 @@ ], "textured_plate_temp_initial_layer": [ "40" + ], + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "400" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "165" + ], + "filament_dev_drying_cooling_temperature": [ + "150" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_drying_softening_temperature": [ + "150" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF15 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF15 @base.json new file mode 100644 index 0000000000..9e7c30dc14 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PA612-CF15 @base.json @@ -0,0 +1,104 @@ +{ + "type": "filament", + "name": "Fiberon PA612-CF15 @base", + "inherits": "fdm_filament_pa", + "from": "system", + "filament_id": "OFcBl0nJ", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_cost": [ + "94.99" + ], + "filament_density": [ + "1.03" + ], + "filament_flow_ratio": [ + "0.96" + ], + "filament_type": [ + "PA-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature_range_low": [ + "250" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "slow_down_min_speed": [ + "10" + ], + "temperature_vitrification": [ + "206.2" + ], + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "400" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "165" + ], + "filament_dev_drying_cooling_temperature": [ + "150" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_drying_softening_temperature": [ + "150" + ] +} diff --git a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF17 @base.json similarity index 50% rename from resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @base.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF17 @base.json index d55b7d2daf..f56f885917 100644 --- a/resources/profiles/BBL/filament/Polymaker/Fiberon PET-CF17 @base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PET-CF17 @base.json @@ -82,5 +82,51 @@ ], "textured_plate_temp_initial_layer": [ "70" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF08 @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF08 @base.json new file mode 100644 index 0000000000..08e7989dbc --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/Fiberon PETG-rCF08 @base.json @@ -0,0 +1,147 @@ +{ + "type": "filament", + "name": "Fiberon PETG-rCF08 @base", + "inherits": "fdm_filament_pet", + "from": "system", + "filament_id": "OFw4WD4T", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "close_fan_the_first_x_layers": [ + "3" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "12" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "0" + ], + "filament_cost": [ + "39.99" + ], + "filament_density": [ + "1.3" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_type": [ + "PETG-CF" + ], + "filament_vendor": [ + "Polymaker" + ], + "full_fan_speed_layer": [ + "0" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature": [ + "270" + ], + "nozzle_temperature_initial_layer": [ + "270" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "95%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "69.7" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite CosPLA @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite CosPLA @base.json new file mode 100644 index 0000000000..a0ed46734e --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite CosPLA @base.json @@ -0,0 +1,117 @@ +{ + "type": "filament", + "name": "PolyLite CosPLA @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFJgijky", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cost": [ + "20.99" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "59" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Galaxy @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Galaxy @base.json new file mode 100644 index 0000000000..3dbf49779f --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Galaxy @base.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "PolyLite PLA Galaxy @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFvyB0Bz", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "61" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Glow @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Glow @base.json new file mode 100644 index 0000000000..fd598973b3 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Glow @base.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "PolyLite PLA Glow @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OF5umxxT", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "61" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Luminous @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Luminous @base.json new file mode 100644 index 0000000000..e4c4679b13 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Luminous @base.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "PolyLite PLA Luminous @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFBoSWxb", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "61" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Neon @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Neon @base.json new file mode 100644 index 0000000000..df73135660 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Neon @base.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "PolyLite PLA Neon @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFitS8al", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "61" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Starlight @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Starlight @base.json new file mode 100644 index 0000000000..467b3e5083 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Starlight @base.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "PolyLite PLA Starlight @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFIxOuOu", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "61" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Translucent @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Translucent @base.json new file mode 100644 index 0000000000..8a03d118c7 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyLite PLA Translucent @base.json @@ -0,0 +1,114 @@ +{ + "type": "filament", + "name": "PolyLite PLA Translucent @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFy02QHU", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.17" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "20" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "2" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "61" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA Marble @base.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA Marble @base.json new file mode 100644 index 0000000000..470a945b3a --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA Marble @base.json @@ -0,0 +1,123 @@ +{ + "type": "filament", + "name": "PolyTerra PLA Marble @base", + "inherits": "fdm_filament_pla", + "from": "system", + "filament_id": "OFxe4rXr", + "instantiation": "false", + "bed_type": [ + "Cool Plate" + ], + "cool_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "eng_plate_temp_initial_layer": [ + "60" + ], + "fan_cooling_layer_time": [ + "80" + ], + "fan_max_speed": [ + "80" + ], + "fan_min_speed": [ + "60" + ], + "filament_cost": [ + "21.99" + ], + "filament_density": [ + "1.37" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature_range_high": [ + "230" + ], + "overhang_fan_speed": [ + "75" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "61" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ] +} diff --git a/resources/profiles/BBL/filament/fdm_filament_sbs.json b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA+ @base.json similarity index 52% rename from resources/profiles/BBL/filament/fdm_filament_sbs.json rename to resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA+ @base.json index 4aef177e14..ac351462b1 100644 --- a/resources/profiles/BBL/filament/fdm_filament_sbs.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/Polymaker/PolyTerra PLA+ @base.json @@ -1,85 +1,117 @@ { "type": "filament", - "name": "fdm_filament_sbs", - "inherits": "fdm_filament_common", + "name": "PolyTerra PLA+ @base", + "inherits": "fdm_filament_pla", "from": "system", + "filament_id": "OFEjbwqG", "instantiation": "false", - "fan_cooling_layer_time": [ - "100" - ], - "filament_max_volumetric_speed": [ - "23" - ], - "filament_type": [ - "SBS" - ], - "filament_density": [ - "1.02" - ], - "filament_cost": [ - "15" + "bed_type": [ + "Cool Plate" ], "cool_plate_temp": [ - "70" - ], - "eng_plate_temp": [ - "70" - ], - "hot_plate_temp": [ - "70" - ], - "textured_plate_temp": [ - "70" + "60" ], "cool_plate_temp_initial_layer": [ - "70" + "60" + ], + "eng_plate_temp": [ + "60" ], "eng_plate_temp_initial_layer": [ - "70" + "60" + ], + "filament_cost": [ + "20.99" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_vendor": [ + "Polymaker" + ], + "hot_plate_temp": [ + "60" ], "hot_plate_temp_initial_layer": [ - "70" - ], - "textured_plate_temp_initial_layer": [ - "70" - ], - "nozzle_temperature_initial_layer": [ - "235" - ], - "reduce_fan_stop_start_freq": [ - "0" - ], - "fan_min_speed": [ - "0" - ], - "overhang_fan_threshold": [ - "50%" - ], - "close_fan_the_first_x_layers": [ - "3" + "60" ], "nozzle_temperature": [ - "235" + "230" ], - "temperature_vitrification": [ - "70" - ], - "nozzle_temperature_range_low": [ - "215" + "nozzle_temperature_initial_layer": [ + "230" ], "nozzle_temperature_range_high": [ - "250" + "230" ], - "slow_down_min_speed": [ - "20" + "overhang_fan_speed": [ + "75" ], "slow_down_layer_time": [ - "4" + "5" ], - "additional_cooling_fan_speed": [ - "40" + "slow_down_min_speed": [ + "5" + ], + "temperature_vitrification": [ + "59" + ], + "textured_plate_temp": [ + "60" + ], + "textured_plate_temp_initial_layer": [ + "60" + ], + "filament_type": [ + "PLA" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" ], "filament_start_gcode": [ "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" ] } diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic ABS @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic ABS @BBL base.json new file mode 100644 index 0000000000..d4a694e968 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic ABS @BBL base.json @@ -0,0 +1,82 @@ +{ + "type": "filament", + "name": "Generic ABS @BBL base", + "inherits": "fdm_filament_abs", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "eng_plate_temp": [ + "90" + ], + "eng_plate_temp_initial_layer": [ + "90" + ], + "filament_adhesiveness_category": [ + "200" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "90" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "75" + ], + "filament_dev_ams_drying_time": [ + "12", + "8.0", + "12", + "8.0" + ], + "filament_dev_drying_cooling_temperature": [ + "75" + ], + "filament_dev_drying_softening_temperature": [ + "80" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "hot_plate_temp": [ + "90" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "270" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "100" + ], + "textured_plate_temp": [ + "90" + ], + "textured_plate_temp_initial_layer": [ + "90" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PA @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PA @BBL base.json new file mode 100644 index 0000000000..87e9176216 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PA @BBL base.json @@ -0,0 +1,88 @@ +{ + "type": "filament", + "name": "Generic PA @BBL base", + "inherits": "fdm_filament_pa", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "65" + ], + "fan_max_speed": [ + "85" + ], + "fan_min_speed": [ + "40" + ], + "filament_adhesiveness_category": [ + "400" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "90" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_drying_cooling_temperature": [ + "65" + ], + "filament_dev_drying_softening_temperature": [ + "85" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "nozzle_temperature": [ + "260" + ], + "nozzle_temperature_initial_layer": [ + "260" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "95" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "3" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PA-CF @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PA-CF @BBL base.json new file mode 100644 index 0000000000..27a6bcc8fe --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PA-CF @BBL base.json @@ -0,0 +1,85 @@ +{ + "type": "filament", + "name": "Generic PA-CF @BBL base", + "inherits": "fdm_filament_pa", + "from": "system", + "instantiation": "false", + "activate_air_filtration": [ + "1" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "fan_cooling_layer_time": [ + "5" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "10" + ], + "filament_adhesiveness_category": [ + "400" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "165" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "85", + "65", + "85" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_time": [ + "18" + ], + "filament_dev_drying_cooling_temperature": [ + "150" + ], + "filament_dev_drying_softening_temperature": [ + "150" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_type": [ + "PA-CF" + ], + "full_fan_speed_layer": [ + "2" + ], + "nozzle_temperature": [ + "290" + ], + "nozzle_temperature_initial_layer": [ + "290" + ], + "overhang_fan_speed": [ + "40" + ], + "overhang_fan_threshold": [ + "0%" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "temperature_vitrification": [ + "170" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PC @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PC @BBL base.json new file mode 100644 index 0000000000..d979d07df1 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PC @BBL base.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Generic PC @BBL base", + "inherits": "fdm_filament_pc", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "500" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "105" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "80", + "65", + "80" + ], + "filament_dev_ams_drying_time": [ + "12", + "8.0", + "12", + "8.0" + ], + "filament_dev_drying_cooling_temperature": [ + "90" + ], + "filament_dev_drying_softening_temperature": [ + "90" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "16" + ], + "filament_start_gcode": [ + "; Filament gcode\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PETG @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PETG @BBL base.json new file mode 100644 index 0000000000..a65e4d08bc --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PETG @BBL base.json @@ -0,0 +1,107 @@ +{ + "type": "filament", + "name": "Generic PETG @BBL base", + "inherits": "fdm_filament_pet", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "12" + ], + "slow_down_min_speed": [ + "20" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PETG-CF @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PETG-CF @BBL base.json new file mode 100644 index 0000000000..8349f1f552 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PETG-CF @BBL base.json @@ -0,0 +1,113 @@ +{ + "type": "filament", + "name": "Generic PETG-CF @BBL base", + "inherits": "Generic PETG-CF @base", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "cool_plate_temp": [ + "0" + ], + "cool_plate_temp_initial_layer": [ + "0" + ], + "eng_plate_temp": [ + "70" + ], + "eng_plate_temp_initial_layer": [ + "70" + ], + "fan_max_speed": [ + "30" + ], + "fan_min_speed": [ + "0" + ], + "filament_adhesiveness_category": [ + "300" + ], + "filament_cost": [ + "34.99" + ], + "filament_density": [ + "1.25" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "75" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "65", + "55", + "55" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "80" + ], + "filament_dev_drying_cooling_temperature": [ + "55" + ], + "filament_dev_drying_softening_temperature": [ + "60" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "hot_plate_temp": [ + "70" + ], + "hot_plate_temp_initial_layer": [ + "70" + ], + "nozzle_temperature_range_high": [ + "270" + ], + "nozzle_temperature_range_low": [ + "240" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "10%" + ], + "required_nozzle_HRC": [ + "40" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "6" + ], + "textured_plate_temp": [ + "70" + ], + "textured_plate_temp_initial_layer": [ + "70" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA @BBL base.json new file mode 100644 index 0000000000..75bd53937d --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA @BBL base.json @@ -0,0 +1,59 @@ +{ + "type": "filament", + "name": "Generic PLA @BBL base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA High Speed @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA High Speed @BBL base.json new file mode 100644 index 0000000000..d25b8b2972 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA High Speed @BBL base.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Generic PLA High Speed @BBL base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_max_volumetric_speed": [ + "18" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA Silk @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA Silk @BBL base.json new file mode 100644 index 0000000000..15a73adc83 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA Silk @BBL base.json @@ -0,0 +1,65 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @BBL base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "35" + ], + "supertack_plate_temp_initial_layer": [ + "35" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA-CF @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA-CF @BBL base.json new file mode 100644 index 0000000000..0f1f98fe3d --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic PLA-CF @BBL base.json @@ -0,0 +1,83 @@ +{ + "type": "filament", + "name": "Generic PLA-CF @BBL base", + "inherits": "fdm_filament_pla", + "from": "system", + "instantiation": "false", + "additional_cooling_fan_speed": [ + "0" + ], + "close_additional_fan_first_x_layers": [ + "3" + ], + "cool_plate_temp": [ + "45" + ], + "cool_plate_temp_initial_layer": [ + "45" + ], + "filament_adhesiveness_category": [ + "100" + ], + "filament_dev_ams_drying_ams_limitations": [ + "1", + "0" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "45", + "45", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "12", + "12", + "12" + ], + "filament_dev_chamber_drying_bed_temperature": [ + "70" + ], + "filament_dev_drying_cooling_temperature": [ + "45" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "filament_type": [ + "PLA-CF" + ], + "required_nozzle_HRC": [ + "40" + ], + "retraction_distances_when_ec": [ + "0" + ], + "slow_down_layer_time": [ + "7" + ], + "slow_down_min_speed": [ + "20" + ], + "supertack_plate_temp": [ + "50" + ], + "supertack_plate_temp_initial_layer": [ + "50" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic TPU @BBL base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic TPU @BBL base.json new file mode 100644 index 0000000000..37ca736246 --- /dev/null +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/Generic TPU @BBL base.json @@ -0,0 +1,49 @@ +{ + "type": "filament", + "name": "Generic TPU @BBL base", + "inherits": "fdm_filament_tpu", + "from": "system", + "instantiation": "false", + "close_additional_fan_first_x_layers": [ + "3" + ], + "filament_adhesiveness_category": [ + "600" + ], + "filament_dev_ams_drying_heat_distortion_temperature": [ + "45" + ], + "filament_dev_ams_drying_temperature": [ + "65", + "75", + "45", + "45" + ], + "filament_dev_ams_drying_time": [ + "12", + "18", + "12", + "18" + ], + "filament_dev_chamber_drying_time": [ + "16" + ], + "filament_dev_drying_cooling_temperature": [ + "40" + ], + "filament_dev_drying_softening_temperature": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n\n" + ], + "filament_start_gcode": [ + "; filament start gcode\n{if (bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >30)||(bed_temperature_initial_layer[current_extruder] >30)}M106 P3 S180\n{endif} \n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}" + ], + "retraction_distances_when_ec": [ + "0" + ], + "volumetric_speed_coefficients": [ + "0 0 0 0 0 0" + ] +} diff --git a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth ABS rABS.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth ABS rABS.json index 5d6b376e47..4d06956b11 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth ABS rABS.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth ABS rABS.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth ABS rABS", - "inherits": "Generic ABS @base", + "inherits": "Generic ABS @BBL base", "from": "system", - "setting_id": "GF_ANRA_00", + "setting_id": "bYVQgQBBRMux4QtM", "filament_id": "OFzk5oAo", "instantiation": "true", "activate_air_filtration": [ + "1", "1" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.95", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA Adura FDA.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA Adura FDA.json index 703389a687..7bc7435c74 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura FDA.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA Adura FDA.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PA Adura FDA", - "inherits": "Generic PA @base", + "inherits": "Generic PA @BBL base", "from": "system", - "setting_id": "GF_ANAF_00", + "setting_id": "P7DJKbbOFdbW8PiQ", "filament_id": "OFSw6Mor", "instantiation": "true", "activate_air_filtration": [ + "1", "1" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.99", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA Adura.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA Adura.json index beba3c51de..b33951c7ba 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA Adura.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA Adura.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PA Adura", - "inherits": "Generic PA @base", + "inherits": "Generic PA @BBL base", "from": "system", - "setting_id": "GF_ANAD_00", + "setting_id": "08Ph3NCT7oy6bt1I", "filament_id": "OFWK0Y9A", "instantiation": "true", "activate_air_filtration": [ + "1", "1" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.99", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA-CF Adura X.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA-CF Adura X.json index f4894e3e6a..9f938e51e9 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA-CF Adura X.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA-CF Adura X.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PA-CF Adura X", - "inherits": "Generic PA-CF @base", + "inherits": "Generic PA-CF @BBL base", "from": "system", - "setting_id": "GF_ANAX_00", + "setting_id": "anjeZ96YVijlGovm", "filament_id": "OFBsbMMF", "instantiation": "true", "activate_air_filtration": [ + "1", "1" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.99", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA6 Addlantis.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA6 Addlantis.json index 5cb61738c8..352bd80ac6 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PA6 Addlantis.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PA6 Addlantis.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PA6 Addlantis", - "inherits": "Generic PA @base", + "inherits": "Generic PA @BBL base", "from": "system", - "setting_id": "GF_ANLA_00", + "setting_id": "b9bF4KKvxA9TaOjF", "filament_id": "OF1ID4N1", "instantiation": "true", "activate_air_filtration": [ + "1", "1" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.99", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PC BLend HT LCF.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PC BLend HT LCF.json index b94065e44d..839c055ebf 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PC BLend HT LCF.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PC BLend HT LCF.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PC BLend HT LCF", - "inherits": "Generic PC @base", + "inherits": "Generic PC @BBL base", "from": "system", - "setting_id": "GF_ANPBX_00", + "setting_id": "UWA9V5XulJ8hHOsK", "filament_id": "OFhN09f0", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.95", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Base.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Base.json index eb1ffaf48c..f2e5824c14 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Base.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Base.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PETG Base", - "inherits": "Generic PETG @base", + "inherits": "Generic PETG @BBL base", "from": "system", - "setting_id": "GF_ANPE_00", + "setting_id": "Akp0GVUm3MHf7OsA", "filament_id": "OFHHwrd1", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.95", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG ESD.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG ESD.json index de07353b97..1074484973 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG ESD.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG ESD.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PETG ESD", - "inherits": "Generic PETG @base", + "inherits": "Generic PETG @BBL base", "from": "system", - "setting_id": "GF_ANEG_00", + "setting_id": "6nKNE7WJ6wCFrNoi", "filament_id": "OFUtiVRn", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.97", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Economy.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Economy.json index f3df226774..3747f7a86f 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Economy.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Economy.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PETG Economy", - "inherits": "Generic PETG @base", + "inherits": "Generic PETG @BBL base", "from": "system", - "setting_id": "GF_ANGE_00", + "setting_id": "eQivhqRViItWCwEX", "filament_id": "OFZGrQTU", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.95", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Flame v0.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Flame v0.json index 08ad97161a..7dea674787 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG Flame v0.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG Flame v0.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PETG Flame v0", - "inherits": "Generic PETG @base", + "inherits": "Generic PETG @BBL base", "from": "system", - "setting_id": "GF_ANPF_00", + "setting_id": "mrOAjreoxAIouiAt", "filament_id": "OF0EYBWQ", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.97", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG PRO Matte.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG PRO Matte.json index 0948d9f9c7..8dc175d8e1 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG PRO Matte.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG PRO Matte.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PETG PRO Matte", - "inherits": "Generic PETG @base", + "inherits": "Generic PETG @BBL base", "from": "system", - "setting_id": "GF_ANPM_00", + "setting_id": "KFHaOT0Jte5AvS9h", "filament_id": "OFU5JPDy", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.95", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG rPETG Matte.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG rPETG Matte.json index 0396c6578d..0454a13f5c 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG rPETG Matte.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG rPETG Matte.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PETG rPETG Matte", - "inherits": "Generic PETG @base", + "inherits": "Generic PETG @BBL base", "from": "system", - "setting_id": "GF_ANRM_00", + "setting_id": "nQKorwiLMPEErXYY", "filament_id": "OFqTwtXM", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.95", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG-CF Rigid X.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG-CF Rigid X.json index a0f78bb956..024faed63d 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PETG-CF Rigid X.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PETG-CF Rigid X.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PETG-CF Rigid X", - "inherits": "Generic PETG-CF @base", + "inherits": "Generic PETG-CF @BBL base", "from": "system", - "setting_id": "GF_ANRX_00", + "setting_id": "YBPZbWUVDHXCCNuf", "filament_id": "OFAcJkl1", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.95", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA E-PLA.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA E-PLA.json index 3a35d16b29..1f6892b815 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA E-PLA.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA E-PLA.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA E-PLA", - "inherits": "Generic PLA @base", + "inherits": "Generic PLA @BBL base", "from": "system", - "setting_id": "GF_ANEP_00", + "setting_id": "8uUckNJ5ysf07IYC", "filament_id": "OF71b7qO", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Economy.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Economy.json index 77a86797f0..ccacef16f4 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Economy.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Economy.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA Economy", - "inherits": "Generic PLA @base", + "inherits": "Generic PLA @BBL base", "from": "system", - "setting_id": "GF_ANPL_00", + "setting_id": "ZENT5cw0e5khSvwe", "filament_id": "OFZJft47", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA HT-PLA PRO Matte.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA HT-PLA PRO Matte.json index 5327b8a083..aa466f3c3e 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA HT-PLA PRO Matte.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA HT-PLA PRO Matte.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA HT-PLA PRO Matte", - "inherits": "Generic PLA @base", + "inherits": "Generic PLA @BBL base", "from": "system", - "setting_id": "GF_ANHTP_00", + "setting_id": "9qfkzOF7e8gAXv57", "filament_id": "OFVDWuxl", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Premium Silk.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Premium Silk.json index 1487f567cd..f794753c4a 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Premium Silk.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Premium Silk.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA Premium Silk", - "inherits": "Generic PLA Silk @base", + "inherits": "Generic PLA Silk @BBL base", "from": "system", - "setting_id": "GF_ANPS_00", + "setting_id": "Z15Ye6VtACtidxAY", "filament_id": "OFOQCfVa", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "1", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Textura.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Textura.json index 789d2bd096..73cfea81a4 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Textura.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Textura.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA Textura", - "inherits": "Generic PLA @base", + "inherits": "Generic PLA @BBL base", "from": "system", - "setting_id": "GF_ANTE_00", + "setting_id": "Lghtct7718TzOZhh", "filament_id": "OFRFhdqy", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Wood.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Wood.json index aed77a1a1a..5d64f416b7 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA Wood.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA Wood.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA Wood", - "inherits": "Generic PLA @base", + "inherits": "Generic PLA @BBL base", "from": "system", - "setting_id": "GF_ANPLW_00", + "setting_id": "HLJjfniZF8YnyDXs", "filament_id": "OFN8QBhu", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA X-PLA High Speed.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA X-PLA High Speed.json index 6e0a0952d5..d752b3adaf 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA High Speed.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA X-PLA High Speed.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA X-PLA High Speed", - "inherits": "Generic PLA High Speed @base", + "inherits": "Generic PLA High Speed @BBL base", "from": "system", - "setting_id": "GF_ANXPH_00", + "setting_id": "6Z0HjNASgsk02KHj", "filament_id": "OFLjDYxH", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA X-PLA.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA X-PLA.json index d785327ee7..2deaf8d323 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA X-PLA.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA X-PLA.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA X-PLA", - "inherits": "Generic PLA @base", + "inherits": "Generic PLA @BBL base", "from": "system", - "setting_id": "GF_ANXP_00", + "setting_id": "DwatndcgamhNXNwa", "filament_id": "OFtdVZpV", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA rPLA RE-ADD.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA rPLA RE-ADD.json index c530f3fa7c..5ef8ccc6b6 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA rPLA RE-ADD.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA rPLA RE-ADD.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PLA rPLA RE-ADD", - "inherits": "Generic PLA @base", + "inherits": "Generic PLA @BBL base", "from": "system", - "setting_id": "GF_ANRPL_00", + "setting_id": "C3PV2FCtxFb74701", "filament_id": "OFnBvPhb", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "0.98", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA-CF Carbon Fiber.json similarity index 98% rename from resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA-CF Carbon Fiber.json index 32debd4c18..60eebfce37 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PLA-CF Carbon Fiber.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PLA-CF Carbon Fiber.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "addnorth PLA-CF Carbon Fiber", - "inherits": "Generic PLA-CF @base", + "inherits": "Generic PLA-CF @BBL base", "from": "system", - "setting_id": "GF_ANPCF_00", + "setting_id": "6EGbWT7sxqv613lw", "filament_id": "OFcpa50Z", "instantiation": "true", "activate_air_filtration": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PVDF Adamant S1.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PVDF Adamant S1.json index 88258976f2..608d67a5bd 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth PVDF Adamant S1.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth PVDF Adamant S1.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth PVDF Adamant S1", - "inherits": "Generic PA @base", + "inherits": "Generic PA @BBL base", "from": "system", - "setting_id": "GF_ANPV_00", + "setting_id": "rc1IER71KiN6wNpH", "filament_id": "OFQ5TxZ2", "instantiation": "true", "activate_air_filtration": [ + "1", "1" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "1", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU EasyFlex.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU EasyFlex.json index afdcb43296..25f2c310db 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU EasyFlex.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU EasyFlex.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth TPU EasyFlex", - "inherits": "Generic TPU @base", + "inherits": "Generic TPU @BBL base", "from": "system", - "setting_id": "GF_ANEF_00", + "setting_id": "X0NEq8DKNad80uRp", "filament_id": "OFO6GMJ3", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "1", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU Pro Matte 85A.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU Pro Matte 85A.json index 81d08c4681..a922a91ba1 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 85A.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU Pro Matte 85A.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth TPU Pro Matte 85A", - "inherits": "Generic TPU @base", + "inherits": "Generic TPU @BBL base", "from": "system", - "setting_id": "GF_ANTA_00", + "setting_id": "2vvu1QFF18EEijLG", "filament_id": "OFvcIGee", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "1", @@ -189,6 +193,7 @@ "nil" ], "filament_retract_restart_extra": [ + "nil", "nil" ], "filament_retract_when_changing_layer": [ diff --git a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU Pro Matte 95A.json similarity index 97% rename from resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json rename to resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU Pro Matte 95A.json index 0b4e7c3fcd..80c80328e8 100644 --- a/resources/profiles/BBL/filament/addnorth/addnorth TPU Pro Matte 95A.json +++ b/resources/profiles/OrcaFilamentLibrary/filament/addnorth/BBL/addnorth TPU Pro Matte 95A.json @@ -1,12 +1,13 @@ { "type": "filament", "name": "addnorth TPU Pro Matte 95A", - "inherits": "Generic TPU @base", + "inherits": "Generic TPU @BBL base", "from": "system", - "setting_id": "GF_ANTM_00", + "setting_id": "lfe1hOdWYCc1gyop", "filament_id": "OFyJjkek", "instantiation": "true", "activate_air_filtration": [ + "0", "0" ], "additional_cooling_fan_speed": [ @@ -72,6 +73,7 @@ "compatible_prints": [], "compatible_prints_condition": "", "complete_print_exhaust_fan_speed": [ + "70", "70" ], "cool_plate_temp": [ @@ -102,6 +104,7 @@ "50" ], "during_print_exhaust_fan_speed": [ + "70", "70" ], "enable_overhang_bridge_fan": [ @@ -148,7 +151,8 @@ "; filament end gcode \n" ], "filament_extruder_variant": [ - "Direct Drive Standard" + "Direct Drive Standard", + "Direct Drive High Flow" ], "filament_flow_ratio": [ "1", diff --git a/resources/profiles/Peopoly.json b/resources/profiles/Peopoly.json index 9b95c24bb3..21ae6bdb93 100644 --- a/resources/profiles/Peopoly.json +++ b/resources/profiles/Peopoly.json @@ -1,6 +1,6 @@ { "name": "Peopoly", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "Peopoly configurations", "machine_model_list": [ diff --git a/resources/profiles/Peopoly/filament/Generic ABS @Peopoly.json b/resources/profiles/Peopoly/filament/Generic ABS @Peopoly.json index d9e2ae777c..9342bcb63c 100644 --- a/resources/profiles/Peopoly/filament/Generic ABS @Peopoly.json +++ b/resources/profiles/Peopoly/filament/Generic ABS @Peopoly.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Peopoly", - "inherits": "fdm_filament_abs", "renamed_from": "Peopoly Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "HLq9urLhPLW0du6x", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Peopoly/filament/Generic PETG @Peopoly.json b/resources/profiles/Peopoly/filament/Generic PETG @Peopoly.json index fc4501866a..0d21a46002 100644 --- a/resources/profiles/Peopoly/filament/Generic PETG @Peopoly.json +++ b/resources/profiles/Peopoly/filament/Generic PETG @Peopoly.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Peopoly", - "inherits": "fdm_filament_petg", "renamed_from": "Peopoly Generic PETG", + "inherits": "fdm_filament_petg", "from": "system", "setting_id": "dgMXFTyLovrMR56j", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Phrozen.json b/resources/profiles/Phrozen.json index f07568bb29..ef10047de6 100644 --- a/resources/profiles/Phrozen.json +++ b/resources/profiles/Phrozen.json @@ -1,6 +1,6 @@ { "name": "Phrozen", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "Phrozen configurations", "machine_model_list": [ diff --git a/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json b/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json index c53abee956..63c6d76ba0 100644 --- a/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json +++ b/resources/profiles/Phrozen/filament/Generic PLA @Phrozen Arco 0.4 nozzle.json @@ -6,6 +6,9 @@ "from": "system", "setting_id": "xTeHmDOY48Bik10J", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_settings_id": [ "Generic PLA @Phrozen Arco 0.4 nozzle" ], diff --git a/resources/profiles/Prusa.json b/resources/profiles/Prusa.json index 723874f67d..c0c6ce2f4e 100644 --- a/resources/profiles/Prusa.json +++ b/resources/profiles/Prusa.json @@ -1,6 +1,6 @@ { "name": "Prusa", - "version": "02.04.00.06", + "version": "02.04.00.09", "force_update": "0", "description": "Prusa configurations", "machine_model_list": [ @@ -20,6 +20,10 @@ "name": "Prusa CORE One L HF", "sub_path": "machine/Prusa CORE One L HF.json" }, + { + "name": "Prusa CORE One MMU3", + "sub_path": "machine/Prusa CORE One MMU3.json" + }, { "name": "Prusa MINI", "sub_path": "machine/Prusa MINI.json" @@ -702,6 +706,26 @@ "name": "0.25mm Speed @MINIIS", "sub_path": "process/0.25mm Speed @MINIIS.json" }, + { + "name": "0.15mm BALANCED @COREONE0.4 + MMU3", + "sub_path": "process/0.15mm BALANCED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.20mm BALANCED @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm BALANCED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm BALANCED @COREONE0.4 + MMU3", + "sub_path": "process/0.25mm BALANCED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm SPEED @COREONE0.4 + MMU3", + "sub_path": "process/0.25mm SPEED @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm STRUCTURAL @COREONE0.4 + MMU3", + "sub_path": "process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json" + }, { "name": "0.05mm DETAIL @MK4S 0.25", "sub_path": "process/0.05mm DETAIL @MK4S 0.25.json" @@ -1114,6 +1138,14 @@ "name": "0.05mm DETAIL @CORE One L 0.25", "sub_path": "process/0.05mm DETAIL @CORE One L 0.25.json" }, + { + "name": "0.07mm DETAIL @COREONE0.25 + MMU3", + "sub_path": "process/0.07mm DETAIL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.12mm SPEED @COREONE0.25 + MMU3", + "sub_path": "process/0.12mm SPEED @COREONE0.25 + MMU3.json" + }, { "name": "0.12mm STRUCTURAL @CORE One 0.25", "sub_path": "process/0.12mm STRUCTURAL @CORE One 0.25.json" @@ -1134,6 +1166,10 @@ "name": "0.15mm STRUCTURAL @MK4S 0.25", "sub_path": "process/0.15mm STRUCTURAL @MK4S 0.25.json" }, + { + "name": "0.12mm STRUCTURAL @COREONE0.3 + MMU3", + "sub_path": "process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json" + }, { "name": "0.16mm SPEED @MK4S 0.3", "sub_path": "process/0.16mm SPEED @MK4S 0.3.json" @@ -1158,6 +1194,10 @@ "name": "0.10mm FAST DETAIL @CORE One L 0.4", "sub_path": "process/0.10mm FAST DETAIL @CORE One L 0.4.json" }, + { + "name": "0.15mm SPEED @COREONE0.4 + MMU3", + "sub_path": "process/0.15mm SPEED @COREONE0.4 + MMU3.json" + }, { "name": "0.15mm SPEED @CORE One HF 0.4", "sub_path": "process/0.15mm SPEED @CORE One HF 0.4.json" @@ -1166,6 +1206,22 @@ "name": "0.15mm SPEED @CORE One L HF 0.4", "sub_path": "process/0.15mm SPEED @CORE One L HF 0.4.json" }, + { + "name": "0.15mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.20mm SOLUBLE FULL @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json" + }, + { + "name": "0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json" + }, + { + "name": "0.20mm SPEED @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm SPEED @COREONE0.4 + MMU3.json" + }, { "name": "0.20mm SPEED @CORE One HF 0.5", "sub_path": "process/0.20mm SPEED @CORE One HF 0.5.json" @@ -1198,6 +1254,10 @@ "name": "0.25mm SPEED @MK4S HF0.5", "sub_path": "process/0.25mm SPEED @MK4S HF0.5.json" }, + { + "name": "0.20mm SPEED @COREONE0.6 + MMU3", + "sub_path": "process/0.20mm SPEED @COREONE0.6 + MMU3.json" + }, { "name": "0.20mm SPEED @CORE One HF 0.6", "sub_path": "process/0.20mm SPEED @CORE One HF 0.6.json" @@ -1222,6 +1282,10 @@ "name": "0.15mm STRUCTURAL @CORE One L 0.4", "sub_path": "process/0.15mm STRUCTURAL @CORE One L 0.4.json" }, + { + "name": "0.20mm STRUCTURAL @COREONE0.4 + MMU3", + "sub_path": "process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json" + }, { "name": "0.25mm STRUCTURAL @CORE One HF 0.4", "sub_path": "process/0.25mm STRUCTURAL @CORE One HF 0.4.json" @@ -1230,6 +1294,10 @@ "name": "0.25mm STRUCTURAL @CORE One L HF 0.4", "sub_path": "process/0.25mm STRUCTURAL @CORE One L HF 0.4.json" }, + { + "name": "0.25mm SPEED @COREONE0.6 + MMU3", + "sub_path": "process/0.25mm SPEED @COREONE0.6 + MMU3.json" + }, { "name": "0.25mm SPEED @CORE One HF 0.6", "sub_path": "process/0.25mm SPEED @CORE One HF 0.6.json" @@ -1262,6 +1330,10 @@ "name": "0.30mm STRUCTURAL @CORE One L HF 0.8", "sub_path": "process/0.30mm STRUCTURAL @CORE One L HF 0.8.json" }, + { + "name": "0.32mm SPEED @COREONE0.6 + MMU3", + "sub_path": "process/0.32mm SPEED @COREONE0.6 + MMU3.json" + }, { "name": "0.32mm SPEED @CORE One HF 0.6", "sub_path": "process/0.32mm SPEED @CORE One HF 0.6.json" @@ -1318,6 +1390,18 @@ "name": "0.55mm SPEED @CORE One L HF 0.8", "sub_path": "process/0.55mm SPEED @CORE One L HF 0.8.json" }, + { + "name": "0.05mm DETAIL @COREONE0.25 + MMU3", + "sub_path": "process/0.05mm DETAIL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.12mm STRUCTURAL @COREONE0.25 + MMU3", + "sub_path": "process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.15mm SPEED @COREONE0.25 + MMU3", + "sub_path": "process/0.15mm SPEED @COREONE0.25 + MMU3.json" + }, { "name": "0.15mm STRUCTURAL @CORE One 0.25", "sub_path": "process/0.15mm STRUCTURAL @CORE One 0.25.json" @@ -1338,6 +1422,10 @@ "name": "0.20mm SPEED @MK4S 0.3", "sub_path": "process/0.20mm SPEED @MK4S 0.3.json" }, + { + "name": "0.16mm STRUCTURAL @COREONE0.3 + MMU3", + "sub_path": "process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json" + }, { "name": "0.20mm STRUCTURAL @CORE One 0.3", "sub_path": "process/0.20mm STRUCTURAL @CORE One 0.3.json" @@ -1346,6 +1434,10 @@ "name": "0.20mm STRUCTURAL @CORE One L 0.3", "sub_path": "process/0.20mm STRUCTURAL @CORE One L 0.3.json" }, + { + "name": "0.10mm FAST DETAIL @COREONE0.4 + MMU3", + "sub_path": "process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json" + }, { "name": "0.25mm STRUCTURAL @CORE One 0.5", "sub_path": "process/0.25mm STRUCTURAL @CORE One 0.5.json" @@ -1370,6 +1462,30 @@ "name": "0.32mm SPEED @MK4S HF0.5", "sub_path": "process/0.32mm SPEED @MK4S HF0.5.json" }, + { + "name": "0.20mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.15mm STRUCTURAL @COREONE0.4 + MMU3", + "sub_path": "process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json" + }, + { + "name": "0.25mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.32mm STRUCTURAL @COREONE0.6 + MMU3", + "sub_path": "process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json" + }, + { + "name": "0.15mm STRUCTURAL @COREONE0.25 + MMU3", + "sub_path": "process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json" + }, + { + "name": "0.16mm SPEED @COREONE0.3 + MMU3", + "sub_path": "process/0.16mm SPEED @COREONE0.3 + MMU3.json" + }, { "name": "0.20mm SPEED @CORE One 0.3", "sub_path": "process/0.20mm SPEED @CORE One 0.3.json" @@ -1378,6 +1494,10 @@ "name": "0.20mm SPEED @CORE One L 0.3", "sub_path": "process/0.20mm SPEED @CORE One L 0.3.json" }, + { + "name": "0.20mm STRUCTURAL @COREONE0.3 + MMU3", + "sub_path": "process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json" + }, { "name": "0.32mm STRUCTURAL @CORE One HF 0.5", "sub_path": "process/0.32mm STRUCTURAL @CORE One HF 0.5.json" @@ -1393,6 +1513,10 @@ { "name": "0.32mm SPEED @CORE One L HF 0.5", "sub_path": "process/0.32mm SPEED @CORE One L HF 0.5.json" + }, + { + "name": "0.20mm SPEED @COREONE0.3 + MMU3", + "sub_path": "process/0.20mm SPEED @COREONE0.3 + MMU3.json" } ], "filament_list": [ @@ -1560,6 +1684,18 @@ "name": "Prusament ASA @CORE One", "sub_path": "filament/Prusament ASA @CORE One.json" }, + { + "name": "Prusament ASA @MK3S", + "sub_path": "filament/Prusament ASA @MK3S.json" + }, + { + "name": "Prusament ASA @MK4", + "sub_path": "filament/Prusament ASA @MK4.json" + }, + { + "name": "Prusament ASA @MK4S", + "sub_path": "filament/Prusament ASA @MK4S.json" + }, { "name": "Prusament ASA @XL", "sub_path": "filament/Prusament ASA @XL.json" @@ -1632,6 +1768,18 @@ "name": "Prusament PA-CF @XL 5T", "sub_path": "filament/Prusament PA-CF @XL 5T.json" }, + { + "name": "Prusament PA11 Carbon Fiber @MK3S", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK3S.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4S", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S.json" + }, { "name": "Generic PC @Prusa", "sub_path": "filament/Generic PC @Prusa.json" @@ -1688,6 +1836,18 @@ "name": "Prusament PC Blend @CORE One", "sub_path": "filament/Prusament PC Blend @CORE One.json" }, + { + "name": "Prusament PC Blend @MK3S", + "sub_path": "filament/Prusament PC Blend @MK3S.json" + }, + { + "name": "Prusament PC Blend @MK4", + "sub_path": "filament/Prusament PC Blend @MK4.json" + }, + { + "name": "Prusament PC Blend @MK4S", + "sub_path": "filament/Prusament PC Blend @MK4S.json" + }, { "name": "Prusament PC Blend @XL", "sub_path": "filament/Prusament PC Blend @XL.json" @@ -1700,6 +1860,18 @@ "name": "Prusament PC-CF @CORE One", "sub_path": "filament/Prusament PC-CF @CORE One.json" }, + { + "name": "Prusament PC Blend Carbon Fiber @MK3S", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK3S.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4S", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S.json" + }, { "name": "Prusament PC-CF @XL", "sub_path": "filament/Prusament PC-CF @XL.json" @@ -1756,6 +1928,18 @@ "name": "Prusament PETG @CORE One", "sub_path": "filament/Prusament PETG @CORE One.json" }, + { + "name": "Prusament PETG @MK3S", + "sub_path": "filament/Prusament PETG @MK3S.json" + }, + { + "name": "Prusament PETG @MK4", + "sub_path": "filament/Prusament PETG @MK4.json" + }, + { + "name": "Prusament PETG @MK4S", + "sub_path": "filament/Prusament PETG @MK4S.json" + }, { "name": "Prusament PETG @base", "sub_path": "filament/Prusament PETG @base.json" @@ -1832,6 +2016,18 @@ "name": "Prusament PLA @CORE One", "sub_path": "filament/Prusament PLA @CORE One.json" }, + { + "name": "Prusament PLA @MK3S", + "sub_path": "filament/Prusament PLA @MK3S.json" + }, + { + "name": "Prusament PLA @MK4", + "sub_path": "filament/Prusament PLA @MK4.json" + }, + { + "name": "Prusament PLA @MK4S", + "sub_path": "filament/Prusament PLA @MK4S.json" + }, { "name": "Prusament PLA @base", "sub_path": "filament/Prusament PLA @base.json" @@ -1840,6 +2036,18 @@ "name": "Prusament rPLA @CORE One", "sub_path": "filament/Prusament rPLA @CORE One.json" }, + { + "name": "Prusament rPLA @MK3S", + "sub_path": "filament/Prusament rPLA @MK3S.json" + }, + { + "name": "Prusament rPLA @MK4", + "sub_path": "filament/Prusament rPLA @MK4.json" + }, + { + "name": "Prusament rPLA @MK4S", + "sub_path": "filament/Prusament rPLA @MK4S.json" + }, { "name": "Prusament rPLA @base", "sub_path": "filament/Prusament rPLA @base.json" @@ -1884,6 +2092,18 @@ "name": "Prusament PVB @CORE One", "sub_path": "filament/Prusament PVB @CORE One.json" }, + { + "name": "Prusament PVB @MK3S", + "sub_path": "filament/Prusament PVB @MK3S.json" + }, + { + "name": "Prusament PVB @MK4", + "sub_path": "filament/Prusament PVB @MK4.json" + }, + { + "name": "Prusament PVB @MK4S", + "sub_path": "filament/Prusament PVB @MK4S.json" + }, { "name": "Prusament PVB @XL", "sub_path": "filament/Prusament PVB @XL.json" @@ -1936,6 +2156,10 @@ "name": "Generic ABS @Prusa CORE One HF 0.8", "sub_path": "filament/Generic ABS @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic ABS @Prusa CORE One MMU3", + "sub_path": "filament/Generic ABS @Prusa CORE One MMU3.json" + }, { "name": "Generic ABS @Prusa MK4S 0.6", "sub_path": "filament/Generic ABS @Prusa MK4S 0.6.json" @@ -2016,6 +2240,10 @@ "name": "Generic ASA @Prusa CORE One HF 0.8", "sub_path": "filament/Generic ASA @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic ASA @Prusa CORE One MMU3", + "sub_path": "filament/Generic ASA @Prusa CORE One MMU3.json" + }, { "name": "Generic ASA @Prusa MK4S 0.6", "sub_path": "filament/Generic ASA @Prusa MK4S 0.6.json" @@ -2064,6 +2292,34 @@ "name": "Prusament ASA @CORE One HF 0.8", "sub_path": "filament/Prusament ASA @CORE One HF 0.8.json" }, + { + "name": "Prusament ASA @CORE One MMU3", + "sub_path": "filament/Prusament ASA @CORE One MMU3.json" + }, + { + "name": "Prusament ASA @MK4S 0.6", + "sub_path": "filament/Prusament ASA @MK4S 0.6.json" + }, + { + "name": "Prusament ASA @MK4S 0.8", + "sub_path": "filament/Prusament ASA @MK4S 0.8.json" + }, + { + "name": "Prusament ASA @MK4S HF0.4", + "sub_path": "filament/Prusament ASA @MK4S HF0.4.json" + }, + { + "name": "Prusament ASA @MK4S HF0.5", + "sub_path": "filament/Prusament ASA @MK4S HF0.5.json" + }, + { + "name": "Prusament ASA @MK4S HF0.6", + "sub_path": "filament/Prusament ASA @MK4S HF0.6.json" + }, + { + "name": "Prusament ASA @MK4S HF0.8", + "sub_path": "filament/Prusament ASA @MK4S HF0.8.json" + }, { "name": "Generic TPU @Prusa CORE One 0.6", "sub_path": "filament/Generic TPU @Prusa CORE One 0.6.json" @@ -2072,6 +2328,10 @@ "name": "Generic TPU @Prusa CORE One 0.8", "sub_path": "filament/Generic TPU @Prusa CORE One 0.8.json" }, + { + "name": "Generic TPU @Prusa CORE One MMU3", + "sub_path": "filament/Generic TPU @Prusa CORE One MMU3.json" + }, { "name": "Generic PA @Prusa", "sub_path": "filament/Generic PA @Prusa.json" @@ -2120,6 +2380,34 @@ "name": "Prusament PA-CF @CORE One 0.8", "sub_path": "filament/Prusament PA-CF @CORE One 0.8.json" }, + { + "name": "Prusament PA-CF @CORE One MMU3", + "sub_path": "filament/Prusament PA-CF @CORE One MMU3.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4S 0.6", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S 0.6.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4S 0.8", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S 0.8.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.4", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S HF0.4.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.5", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S HF0.5.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.6", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S HF0.6.json" + }, + { + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.8", + "sub_path": "filament/Prusament PA11 Carbon Fiber @MK4S HF0.8.json" + }, { "name": "Generic PC HF @Prusa MINIIS", "sub_path": "filament/Generic PC HF @Prusa MINIIS.json" @@ -2156,6 +2444,34 @@ "name": "Prusament PC Blend @CORE One HF 0.8", "sub_path": "filament/Prusament PC Blend @CORE One HF 0.8.json" }, + { + "name": "Prusament PC Blend @CORE One MMU3", + "sub_path": "filament/Prusament PC Blend @CORE One MMU3.json" + }, + { + "name": "Prusament PC Blend @MK4S 0.6", + "sub_path": "filament/Prusament PC Blend @MK4S 0.6.json" + }, + { + "name": "Prusament PC Blend @MK4S 0.8", + "sub_path": "filament/Prusament PC Blend @MK4S 0.8.json" + }, + { + "name": "Prusament PC Blend @MK4S HF0.4", + "sub_path": "filament/Prusament PC Blend @MK4S HF0.4.json" + }, + { + "name": "Prusament PC Blend @MK4S HF0.5", + "sub_path": "filament/Prusament PC Blend @MK4S HF0.5.json" + }, + { + "name": "Prusament PC Blend @MK4S HF0.6", + "sub_path": "filament/Prusament PC Blend @MK4S HF0.6.json" + }, + { + "name": "Prusament PC Blend @MK4S HF0.8", + "sub_path": "filament/Prusament PC Blend @MK4S HF0.8.json" + }, { "name": "Prusament PC-CF @CORE One 0.6", "sub_path": "filament/Prusament PC-CF @CORE One 0.6.json" @@ -2164,6 +2480,34 @@ "name": "Prusament PC-CF @CORE One 0.8", "sub_path": "filament/Prusament PC-CF @CORE One 0.8.json" }, + { + "name": "Prusament PC-CF @CORE One MMU3", + "sub_path": "filament/Prusament PC-CF @CORE One MMU3.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4S 0.6", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S 0.6.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4S 0.8", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S 0.8.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.4", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S HF0.4.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.5", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S HF0.5.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.6", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S HF0.6.json" + }, + { + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.8", + "sub_path": "filament/Prusament PC Blend Carbon Fiber @MK4S HF0.8.json" + }, { "name": "Generic PETG @Prusa CORE One 0.6", "sub_path": "filament/Generic PETG @Prusa CORE One 0.6.json" @@ -2188,6 +2532,10 @@ "name": "Generic PETG @Prusa CORE One HF 0.8", "sub_path": "filament/Generic PETG @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic PETG @Prusa CORE One MMU3", + "sub_path": "filament/Generic PETG @Prusa CORE One MMU3.json" + }, { "name": "Generic PETG @Prusa MK4S 0.6", "sub_path": "filament/Generic PETG @Prusa MK4S 0.6.json" @@ -2268,6 +2616,34 @@ "name": "Prusament PETG @CORE One HF 0.8", "sub_path": "filament/Prusament PETG @CORE One HF 0.8.json" }, + { + "name": "Prusament PETG @CORE One MMU3", + "sub_path": "filament/Prusament PETG @CORE One MMU3.json" + }, + { + "name": "Prusament PETG @MK4S 0.6", + "sub_path": "filament/Prusament PETG @MK4S 0.6.json" + }, + { + "name": "Prusament PETG @MK4S 0.8", + "sub_path": "filament/Prusament PETG @MK4S 0.8.json" + }, + { + "name": "Prusament PETG @MK4S HF0.4", + "sub_path": "filament/Prusament PETG @MK4S HF0.4.json" + }, + { + "name": "Prusament PETG @MK4S HF0.5", + "sub_path": "filament/Prusament PETG @MK4S HF0.5.json" + }, + { + "name": "Prusament PETG @MK4S HF0.6", + "sub_path": "filament/Prusament PETG @MK4S HF0.6.json" + }, + { + "name": "Prusament PETG @MK4S HF0.8", + "sub_path": "filament/Prusament PETG @MK4S HF0.8.json" + }, { "name": "Prusament PETG @XL", "sub_path": "filament/Prusament PETG @XL.json" @@ -2300,6 +2676,10 @@ "name": "Generic PLA @Prusa CORE One HF 0.8", "sub_path": "filament/Generic PLA @Prusa CORE One HF 0.8.json" }, + { + "name": "Generic PLA @Prusa CORE One MMU3", + "sub_path": "filament/Generic PLA @Prusa CORE One MMU3.json" + }, { "name": "Generic PLA @Prusa MK4S 0.6", "sub_path": "filament/Generic PLA @Prusa MK4S 0.6.json" @@ -2368,6 +2748,10 @@ "name": "Generic PLA Silk @Prusa CORE One 0.8", "sub_path": "filament/Generic PLA Silk @Prusa CORE One 0.8.json" }, + { + "name": "Generic PLA Silk @Prusa CORE One MMU3", + "sub_path": "filament/Generic PLA Silk @Prusa CORE One MMU3.json" + }, { "name": "Generic PLA-CF @Prusa", "sub_path": "filament/Generic PLA-CF @Prusa.json" @@ -2412,6 +2796,34 @@ "name": "Prusament PLA @CORE One HF 0.8", "sub_path": "filament/Prusament PLA @CORE One HF 0.8.json" }, + { + "name": "Prusament PLA @CORE One MMU3", + "sub_path": "filament/Prusament PLA @CORE One MMU3.json" + }, + { + "name": "Prusament PLA @MK4S 0.6", + "sub_path": "filament/Prusament PLA @MK4S 0.6.json" + }, + { + "name": "Prusament PLA @MK4S 0.8", + "sub_path": "filament/Prusament PLA @MK4S 0.8.json" + }, + { + "name": "Prusament PLA @MK4S HF0.4", + "sub_path": "filament/Prusament PLA @MK4S HF0.4.json" + }, + { + "name": "Prusament PLA @MK4S HF0.5", + "sub_path": "filament/Prusament PLA @MK4S HF0.5.json" + }, + { + "name": "Prusament PLA @MK4S HF0.6", + "sub_path": "filament/Prusament PLA @MK4S HF0.6.json" + }, + { + "name": "Prusament PLA @MK4S HF0.8", + "sub_path": "filament/Prusament PLA @MK4S HF0.8.json" + }, { "name": "Prusament PLA @XL", "sub_path": "filament/Prusament PLA @XL.json" @@ -2428,6 +2840,34 @@ "name": "Prusament rPLA @CORE One 0.8", "sub_path": "filament/Prusament rPLA @CORE One 0.8.json" }, + { + "name": "Prusament rPLA @CORE One MMU3", + "sub_path": "filament/Prusament rPLA @CORE One MMU3.json" + }, + { + "name": "Prusament rPLA @MK4S 0.6", + "sub_path": "filament/Prusament rPLA @MK4S 0.6.json" + }, + { + "name": "Prusament rPLA @MK4S 0.8", + "sub_path": "filament/Prusament rPLA @MK4S 0.8.json" + }, + { + "name": "Prusament rPLA @MK4S HF0.4", + "sub_path": "filament/Prusament rPLA @MK4S HF0.4.json" + }, + { + "name": "Prusament rPLA @MK4S HF0.5", + "sub_path": "filament/Prusament rPLA @MK4S HF0.5.json" + }, + { + "name": "Prusament rPLA @MK4S HF0.6", + "sub_path": "filament/Prusament rPLA @MK4S HF0.6.json" + }, + { + "name": "Prusament rPLA @MK4S HF0.8", + "sub_path": "filament/Prusament rPLA @MK4S HF0.8.json" + }, { "name": "Prusament rPLA @XL", "sub_path": "filament/Prusament rPLA @XL.json" @@ -2476,6 +2916,34 @@ "name": "Prusament PVB @CORE One 0.8", "sub_path": "filament/Prusament PVB @CORE One 0.8.json" }, + { + "name": "Prusament PVB @CORE One MMU3", + "sub_path": "filament/Prusament PVB @CORE One MMU3.json" + }, + { + "name": "Prusament PVB @MK4S 0.6", + "sub_path": "filament/Prusament PVB @MK4S 0.6.json" + }, + { + "name": "Prusament PVB @MK4S 0.8", + "sub_path": "filament/Prusament PVB @MK4S 0.8.json" + }, + { + "name": "Prusament PVB @MK4S HF0.4", + "sub_path": "filament/Prusament PVB @MK4S HF0.4.json" + }, + { + "name": "Prusament PVB @MK4S HF0.5", + "sub_path": "filament/Prusament PVB @MK4S HF0.5.json" + }, + { + "name": "Prusament PVB @MK4S HF0.6", + "sub_path": "filament/Prusament PVB @MK4S HF0.6.json" + }, + { + "name": "Prusament PVB @MK4S HF0.8", + "sub_path": "filament/Prusament PVB @MK4S HF0.8.json" + }, { "name": "Generic TPU @Prusa MK4S 0.6", "sub_path": "filament/Generic TPU @Prusa MK4S 0.6.json" @@ -2730,6 +3198,10 @@ "name": "fdm_machine_common_xl_5t", "sub_path": "machine/fdm_machine_common_xl_5t.json" }, + { + "name": "Prusa CORE One MMU3 0.4 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.4 nozzle.json" + }, { "name": "Prusa CORE One 0.5 nozzle", "sub_path": "machine/Prusa CORE One 0.5 nozzle.json" @@ -2802,6 +3274,18 @@ "name": "Prusa XL 5T 0.8 nozzle", "sub_path": "machine/Prusa XL 5T 0.8 nozzle.json" }, + { + "name": "Prusa CORE One MMU3 0.25 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.25 nozzle.json" + }, + { + "name": "Prusa CORE One MMU3 0.3 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.3 nozzle.json" + }, + { + "name": "Prusa CORE One MMU3 0.6 nozzle", + "sub_path": "machine/Prusa CORE One MMU3 0.6 nozzle.json" + }, { "name": "Prusa MK4S HF0.5 nozzle", "sub_path": "machine/Prusa MK4S HF0.5 nozzle.json" diff --git a/resources/profiles/Prusa/Prusa CORE One MMU3_cover.png b/resources/profiles/Prusa/Prusa CORE One MMU3_cover.png new file mode 100644 index 0000000000..be841d654b Binary files /dev/null and b/resources/profiles/Prusa/Prusa CORE One MMU3_cover.png differ diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.6.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.6.json index 8ba18e9dde..8493c75c81 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa CORE One 0.6", - "inherits": "Generic ABS @Prusa CORE One", "renamed_from": "Prusa Generic ABS @CORE One 0.6;Prusa Generic ABS CORE One 0.6", + "inherits": "Generic ABS @Prusa CORE One", "from": "system", "setting_id": "PYQhstNvKFJ7qsxe", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.8.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.8.json index 2981c2ef63..cc8322476d 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa CORE One 0.8", - "inherits": "Generic ABS @Prusa CORE One", "renamed_from": "Prusa Generic ABS @CORE One 0.8;Prusa Generic ABS CORE One 0.8", + "inherits": "Generic ABS @Prusa CORE One", "from": "system", "setting_id": "ExG49agessyLCVpW", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.4.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.4.json index f2e61055ab..caf36dc7d1 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.4.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa CORE One HF 0.4", - "inherits": "Generic ABS @Prusa CORE One", "renamed_from": "Prusa Generic ABS @CORE One HF 0.4;Prusa Generic ABS CORE One HF 0.4", + "inherits": "Generic ABS @Prusa CORE One", "from": "system", "setting_id": "ASYz8yASE82tQDII", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.5.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.5.json index 14782a747a..4d0ae20a33 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.5.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa CORE One HF 0.5", - "inherits": "Generic ABS @Prusa CORE One", "renamed_from": "Prusa Generic ABS @CORE One HF 0.5;Prusa Generic ABS CORE One HF 0.5", + "inherits": "Generic ABS @Prusa CORE One", "from": "system", "setting_id": "mzZCm8XDmAR23YR6", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.6.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.6.json index be46455a73..6419e2a9d4 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa CORE One HF 0.6", - "inherits": "Generic ABS @Prusa CORE One", "renamed_from": "Prusa Generic ABS @CORE One HF 0.6;Prusa Generic ABS CORE One HF 0.6", + "inherits": "Generic ABS @Prusa CORE One", "from": "system", "setting_id": "gJhX2KBpk4wfXIj0", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.8.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.8.json index f4d2954ad7..84913947af 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One HF 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa CORE One HF 0.8", - "inherits": "Generic ABS @Prusa CORE One", "renamed_from": "Prusa Generic ABS @CORE One HF 0.8;Prusa Generic ABS CORE One HF 0.8", + "inherits": "Generic ABS @Prusa CORE One", "from": "system", "setting_id": "JbGYSVdZTeFJXaVk", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..b909758269 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic ABS @Prusa CORE One MMU3", + "inherits": "Generic ABS @Prusa CORE One", + "from": "system", + "setting_id": "TM5fcvhbo1lgzsU6", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One.json index 7339d20a7c..146903ac55 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa CORE One.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa CORE One", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS @CORE One;Prusa Generic ABS CORE One", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "0k31oXq1pLQsHvrj", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.25.json index 0fe673d854..23709aa9a8 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MINIIS 0.25", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS @MINIIS 0.25;Prusa Generic ABS MINIIS 0.25", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "T7U23i3I3ALV2oEd", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.6.json index 3b9fa495e3..41dc794378 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MINIIS 0.6", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS @MINIIS 0.6;Prusa Generic ABS MINIIS 0.6", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "iZdNxczgKBs0zIiI", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.8.json index e9d5d7554b..71a6e81ce3 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MINIIS 0.8", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS @MINIIS 0.8;Prusa Generic ABS MINIIS 0.8", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "f6fZt6LNgXSHjInj", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS.json index 9f6569d6e9..f32d65f4b7 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MINIIS", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS @MINIIS;Prusa Generic ABS MINIIS", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "ZqiVOVIYGAbB1SPk", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.25.json index 0a36c04f02..48f60ab2be 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK3.5 0.25", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS @MK3.5 0.25;Prusa Generic ABS MK3.5 0.25", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "IjZS8VJrGg6fRiI2", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.6.json index 04626e6ad8..853478b06e 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK3.5 0.6", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS @MK3.5 0.6;Prusa Generic ABS MK3.5 0.6", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "iJ2u6LgWCZd2zaPJ", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.8.json index 4e65b7e329..dde209cb04 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK3.5 0.8", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS @MK3.5 0.8;Prusa Generic ABS MK3.5 0.8", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "m8neIe1dfWt5Klbq", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5.json index 075e055e72..bdd0f313ea 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK3.5", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS @MK3.5;Prusa Generic ABS MK3.5", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "EEc6F9uzIkv6nFib", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4.json index 9ab147b678..a6fc0f89da 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS @MK4;Prusa Generic ABS MK4", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "MVcRPldYJo5fnXh8", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.6.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.6.json index 7371c1f2f9..9e27724462 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4S 0.6", - "inherits": "Generic ABS @Prusa MK4S", "renamed_from": "Prusa Generic ABS @MK4S 0.6;Prusa Generic ABS MK4S 0.6", + "inherits": "Generic ABS @Prusa MK4S", "from": "system", "setting_id": "aNRfxkoYTEG3NPV1", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.8.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.8.json index bf0e8419cf..72718602a4 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4S 0.8", - "inherits": "Generic ABS @Prusa MK4S", "renamed_from": "Prusa Generic ABS @MK4S 0.8;Prusa Generic ABS MK4S 0.8", + "inherits": "Generic ABS @Prusa MK4S", "from": "system", "setting_id": "sL7NL7GOf52fzxnj", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.4.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.4.json index 84aca85d1a..c0e2cd5932 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.4.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4S HF0.4", - "inherits": "Generic ABS @Prusa MK4S", "renamed_from": "Prusa Generic ABS @MK4S HF0.4;Prusa Generic ABS MK4S HF0.4", + "inherits": "Generic ABS @Prusa MK4S", "from": "system", "setting_id": "usm5Dycg7z1b1o1v", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.5.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.5.json index cb9f3ccebc..6b5706180e 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.5.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4S HF0.5", - "inherits": "Generic ABS @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic ABS @MK4S HF0.5;Prusa Generic ABS MK4S HF0.5", + "inherits": "Generic ABS @Prusa MK4S HF0.4", "from": "system", "setting_id": "EdrmoUsReFVn5EWW", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.6.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.6.json index 2327e2d1cc..2de8b74683 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4S HF0.6", - "inherits": "Generic ABS @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic ABS @MK4S HF0.6;Prusa Generic ABS MK4S HF0.6", + "inherits": "Generic ABS @Prusa MK4S HF0.4", "from": "system", "setting_id": "lcxvk4AN6z8NGdKv", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.8.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.8.json index 81bf85e41c..104c612597 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S HF0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4S HF0.8", - "inherits": "Generic ABS @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic ABS @MK4S HF0.8;Prusa Generic ABS MK4S HF0.8", + "inherits": "Generic ABS @Prusa MK4S HF0.4", "from": "system", "setting_id": "VTSZGauVB9yGzOJD", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S.json index c454e1d79b..2809ff16e9 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa MK4S.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa MK4S", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS @MK4S;Prusa Generic ABS MK4S", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "6xkFvOyWtTQNXYAm", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Prusa/filament/Generic ABS @Prusa.json b/resources/profiles/Prusa/filament/Generic ABS @Prusa.json index 0c10f8f297..6747d42b45 100644 --- a/resources/profiles/Prusa/filament/Generic ABS @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic ABS @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Prusa", - "inherits": "Generic ABS @Prusa base", "renamed_from": "Prusa Generic ABS", + "inherits": "Generic ABS @Prusa base", "from": "system", "setting_id": "RBSSZVt1NCAz4x3V", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.6.json index 071e689280..c6390f9d8d 100644 --- a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HF @Prusa MINIIS 0.6", - "inherits": "Generic ABS HF @Prusa base", "renamed_from": "Prusa Generic ABS HF @MINIIS 0.6;Prusa Generic ABS HF MINIIS 0.6", + "inherits": "Generic ABS HF @Prusa base", "from": "system", "setting_id": "L6copDR26trR0D8B", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.8.json index ca0b250240..a52f9f3f40 100644 --- a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HF @Prusa MINIIS 0.8", - "inherits": "Generic ABS HF @Prusa base", "renamed_from": "Prusa Generic ABS HF @MINIIS 0.8;Prusa Generic ABS HF MINIIS 0.8", + "inherits": "Generic ABS HF @Prusa base", "from": "system", "setting_id": "oxiwspATW960u3eZ", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS.json index 6acc1844e7..b845f03d4d 100644 --- a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HF @Prusa MINIIS", - "inherits": "Generic ABS HF @Prusa base", "renamed_from": "Prusa Generic ABS HF @MINIIS;Prusa Generic ABS HF MINIIS", + "inherits": "Generic ABS HF @Prusa base", "from": "system", "setting_id": "KcRRWqB7hrovzBng", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.6.json index 5e446b1507..2dbab6b643 100644 --- a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS HF @MK3.5 0.6;Prusa Generic ABS HF MK3.5 0.6", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "ELwxwCcaOKeCUqoB", "filament_id": "OF55jHAJ", diff --git a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.8.json index e5f48f3390..4a0a033087 100644 --- a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS HF @MK3.5 0.8;Prusa Generic ABS HF MK3.5 0.8", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "xWMzscdlR6llxFKQ", "filament_id": "OF55jHAJ", diff --git a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5.json index 9c1f224149..f814613ec2 100644 --- a/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic ABS HF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HF @Prusa MK3.5", - "inherits": "fdm_filament_abs", "renamed_from": "Prusa Generic ABS HF @MK3.5;Prusa Generic ABS HF MK3.5", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "n9Xu8L69l5rs6VZF", "filament_id": "OF55jHAJ", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.6.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.6.json index 0fa54a9d21..15413c6ac0 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa CORE One 0.6", - "inherits": "Generic ASA @Prusa CORE One", "renamed_from": "Prusa Generic ASA @CORE One 0.6;Prusa Generic ASA CORE One 0.6", + "inherits": "Generic ASA @Prusa CORE One", "from": "system", "setting_id": "WJzGT568OrlSqxjt", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.8.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.8.json index db78ff7eeb..008cbbc758 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa CORE One 0.8", - "inherits": "Generic ASA @Prusa CORE One", "renamed_from": "Prusa Generic ASA @CORE One 0.8;Prusa Generic ASA CORE One 0.8", + "inherits": "Generic ASA @Prusa CORE One", "from": "system", "setting_id": "VtxVQIuWVkP6W3aN", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.4.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.4.json index 18a1b68fb3..825a3de691 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.4.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa CORE One HF 0.4", - "inherits": "Generic ASA @Prusa CORE One", "renamed_from": "Prusa Generic ASA @CORE One HF 0.4;Prusa Generic ASA CORE One HF 0.4", + "inherits": "Generic ASA @Prusa CORE One", "from": "system", "setting_id": "eKDfiVRE59itoppm", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.5.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.5.json index dd7c08b25f..86dec35130 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.5.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa CORE One HF 0.5", - "inherits": "Generic ASA @Prusa CORE One", "renamed_from": "Prusa Generic ASA @CORE One HF 0.5;Prusa Generic ASA CORE One HF 0.5", + "inherits": "Generic ASA @Prusa CORE One", "from": "system", "setting_id": "ZjHf5Vvtf4ESNnWb", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.6.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.6.json index 7ca03b1c37..e3de3e1d3d 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa CORE One HF 0.6", - "inherits": "Generic ASA @Prusa CORE One", "renamed_from": "Prusa Generic ASA @CORE One HF 0.6;Prusa Generic ASA CORE One HF 0.6", + "inherits": "Generic ASA @Prusa CORE One", "from": "system", "setting_id": "aRDgUgQJWdNDJx5c", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.8.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.8.json index 7fe2a7d8bf..c8d78a0e69 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One HF 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa CORE One HF 0.8", - "inherits": "Generic ASA @Prusa CORE One", "renamed_from": "Prusa Generic ASA @CORE One HF 0.8;Prusa Generic ASA CORE One HF 0.8", + "inherits": "Generic ASA @Prusa CORE One", "from": "system", "setting_id": "UQYl8pGvqg2D9zJX", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..4461d30750 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic ASA @Prusa CORE One MMU3", + "inherits": "Generic ASA @Prusa CORE One", + "from": "system", + "setting_id": "0uAHoCupgHmVYVEx", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One.json index 84fe0fa3d9..853b1e0803 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa CORE One.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa CORE One", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @CORE One;Prusa Generic ASA CORE One", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "Q7fgojkHRZI0floy", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.25.json index 8aeaefd5c8..b4f7bbc063 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MINIIS 0.25", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MINIIS 0.25;Prusa Generic ASA MINIIS 0.25", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "3k53bfrhLAnuxHQo", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.6.json index 46cf4ee835..b52d104a19 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MINIIS 0.6", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MINIIS 0.6;Prusa Generic ASA MINIIS 0.6", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "NMILNvvq88zkz2Lf", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.8.json index 2e96b0d886..2f968e4792 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MINIIS 0.8", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MINIIS 0.8;Prusa Generic ASA MINIIS 0.8", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "lnjqcRttOW0XRGe2", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS.json index add2390249..01270df239 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MINIIS", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MINIIS;Prusa Generic ASA MINIIS", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "53FptNgFYqTPZfkV", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.25.json index ddf9c2d380..c97d7ae278 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK3.5 0.25", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MK3.5 0.25;Prusa Generic ASA MK3.5 0.25", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "zyUCfzPlsqRZiUvj", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.6.json index 0bcbf559e4..3e11e59a68 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK3.5 0.6", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MK3.5 0.6;Prusa Generic ASA MK3.5 0.6", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "AjpsLZCJaPLfpGdv", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.8.json index 2ca5decddd..e92daf0a82 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK3.5 0.8", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MK3.5 0.8;Prusa Generic ASA MK3.5 0.8", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "UwiRVbIWfsSjXcwV", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5.json index 61eed484a1..2bbcdd5b2a 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK3.5", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MK3.5;Prusa Generic ASA MK3.5", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "BA46zZsxlvH5bdbC", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4.json index bf6998903d..2afc566d7b 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MK4;Prusa Generic ASA MK4", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "3HdBZTnRTu6aKN1e", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.6.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.6.json index 15d5cb17a8..378d3eb14b 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4S 0.6", - "inherits": "Generic ASA @Prusa MK4S", "renamed_from": "Prusa Generic ASA @MK4S 0.6;Prusa Generic ASA MK4S 0.6", + "inherits": "Generic ASA @Prusa MK4S", "from": "system", "setting_id": "gtPmGmeYUKi7hwVI", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.8.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.8.json index 5af8faecb8..54710e830a 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4S 0.8", - "inherits": "Generic ASA @Prusa MK4S", "renamed_from": "Prusa Generic ASA @MK4S 0.8;Prusa Generic ASA MK4S 0.8", + "inherits": "Generic ASA @Prusa MK4S", "from": "system", "setting_id": "a0IXdYic1FVnKaJg", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.4.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.4.json index 033ca2b942..4ce726bbe0 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.4.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4S HF0.4", - "inherits": "Generic ASA @Prusa MK4S", "renamed_from": "Prusa Generic ASA @MK4S HF0.4;Prusa Generic ASA MK4S HF0.4", + "inherits": "Generic ASA @Prusa MK4S", "from": "system", "setting_id": "INXVBsLNAkRQUlPU", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.5.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.5.json index fe96876ce6..64352c5df0 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.5.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4S HF0.5", - "inherits": "Generic ASA @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic ASA @MK4S HF0.5;Prusa Generic ASA MK4S HF0.5", + "inherits": "Generic ASA @Prusa MK4S HF0.4", "from": "system", "setting_id": "g7VYJJrBS9mmbJOi", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.6.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.6.json index 56c2ff76e0..d167d8e54e 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4S HF0.6", - "inherits": "Generic ASA @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic ASA @MK4S HF0.6;Prusa Generic ASA MK4S HF0.6", + "inherits": "Generic ASA @Prusa MK4S HF0.4", "from": "system", "setting_id": "yDj1rzyRIOYJM4Pp", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.8.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.8.json index be3eeb1fe4..ed1b0939dc 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S HF0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4S HF0.8", - "inherits": "Generic ASA @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic ASA @MK4S HF0.8;Prusa Generic ASA MK4S HF0.8", + "inherits": "Generic ASA @Prusa MK4S HF0.4", "from": "system", "setting_id": "HF59RnyQo2wt5act", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S.json index 80ba2d523b..a8f931c1c6 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa MK4S.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa MK4S", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA @MK4S;Prusa Generic ASA MK4S", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "THc7WYsGi7nwc5wv", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA @Prusa.json b/resources/profiles/Prusa/filament/Generic ASA @Prusa.json index 19d7553977..e8df9c7e12 100644 --- a/resources/profiles/Prusa/filament/Generic ASA @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic ASA @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Prusa", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "Uff8hd9OkoS2Yly7", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.6.json index a8806ff0c6..4eba0eaf3f 100644 --- a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA HF @Prusa MINIIS 0.6", - "inherits": "Generic ASA HF @Prusa base", "renamed_from": "Prusa Generic ASA HF @MINIIS 0.6;Prusa Generic ASA HF MINIIS 0.6", + "inherits": "Generic ASA HF @Prusa base", "from": "system", "setting_id": "Xswtt3GpBabtxN4h", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.8.json index cceae0087a..61e088ac76 100644 --- a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA HF @Prusa MINIIS 0.8", - "inherits": "Generic ASA HF @Prusa base", "renamed_from": "Prusa Generic ASA HF @MINIIS 0.8;Prusa Generic ASA HF MINIIS 0.8", + "inherits": "Generic ASA HF @Prusa base", "from": "system", "setting_id": "z13Q2CqpzsnazYwI", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS.json index 4a9bb2b877..2f9e4d232a 100644 --- a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA HF @Prusa MINIIS", - "inherits": "Generic ASA HF @Prusa base", "renamed_from": "Prusa Generic ASA HF @MINIIS;Prusa Generic ASA HF MINIIS", + "inherits": "Generic ASA HF @Prusa base", "from": "system", "setting_id": "zzMFtHrjmImnj77f", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.6.json index e62013867c..a9f7e9941b 100644 --- a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA HF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA HF @MK3.5 0.6;Prusa Generic ASA HF MK3.5 0.6", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "lhsnnKDQp3U8enP3", "filament_id": "OFzRtFM9", diff --git a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.8.json index 74d0b8a4dc..15c68eb01e 100644 --- a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA HF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA HF @MK3.5 0.8;Prusa Generic ASA HF MK3.5 0.8", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "Qb9bphdgmmLKHgnC", "filament_id": "OFzRtFM9", diff --git a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5.json index b5675c32a0..ecbec14fc8 100644 --- a/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic ASA HF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA HF @Prusa MK3.5", - "inherits": "fdm_filament_asa", "renamed_from": "Prusa Generic ASA HF @MK3.5;Prusa Generic ASA HF MK3.5", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "C9YvhnKeHonpemK8", "filament_id": "OFzRtFM9", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.25.json index f887a7caca..e78ac3fe42 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MINIIS 0.25", - "inherits": "Generic PA @Prusa base", "renamed_from": "Prusa Generic PA @MINIIS 0.25;Prusa Generic PA MINIIS 0.25", + "inherits": "Generic PA @Prusa base", "from": "system", "setting_id": "zONIDmAy6bC6rkBd", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.6.json index fce5c4f837..91cd7ac4b6 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MINIIS 0.6", - "inherits": "Generic PA @Prusa base", "renamed_from": "Prusa Generic PA @MINIIS 0.6;Prusa Generic PA MINIIS 0.6", + "inherits": "Generic PA @Prusa base", "from": "system", "setting_id": "Ib0bThHzZ0GXWgXv", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.8.json index 35c7df7919..764287a488 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MINIIS 0.8", - "inherits": "Generic PA @Prusa base", "renamed_from": "Prusa Generic PA @MINIIS 0.8;Prusa Generic PA MINIIS 0.8", + "inherits": "Generic PA @Prusa base", "from": "system", "setting_id": "WSCkyvdqYKalsLHg", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS.json index 67e59c92d9..fb8f18d875 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MINIIS", - "inherits": "Generic PA @Prusa base", "renamed_from": "Prusa Generic PA @MINIIS;Prusa Generic PA MINIIS", + "inherits": "Generic PA @Prusa base", "from": "system", "setting_id": "06VxUw37OfEzaSka", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.25.json index eebbafe187..f4dad0fb8d 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MK3.5 0.25", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA @MK3.5 0.25;Prusa Generic PA MK3.5 0.25", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "htgSl4rIQ1smRBy4", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.6.json index 6405d18e56..d23262e4e9 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA @MK3.5 0.6;Prusa Generic PA MK3.5 0.6", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "LPzPJN0XdHVQDEsd", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.8.json index d85d70d810..773aa08aaa 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA @MK3.5 0.8;Prusa Generic PA MK3.5 0.8", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "WiO6dm6LbzJxOC9j", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5.json index f3309fd275..a089d00fb2 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa MK3.5", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA @MK3.5;Prusa Generic PA MK3.5", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "YfGmmjqpxHcDcRsk", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Prusa/filament/Generic PA @Prusa.json b/resources/profiles/Prusa/filament/Generic PA @Prusa.json index 1ebaec2fe2..d6d2f33cd8 100644 --- a/resources/profiles/Prusa/filament/Generic PA @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic PA @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Prusa", - "inherits": "Generic PA @Prusa base", "renamed_from": "Prusa Generic PA", + "inherits": "Generic PA @Prusa base", "from": "system", "setting_id": "zTnz1NYXoXxIHhRv", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.25.json index 85ae694018..15c69ed420 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MINIIS 0.25", - "inherits": "Generic PA-CF @Prusa base", "renamed_from": "Prusa Generic PA-CF @MINIIS 0.25;Prusa Generic PA-CF MINIIS 0.25", + "inherits": "Generic PA-CF @Prusa base", "from": "system", "setting_id": "5OyMl43GFDPQHrx3", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.6.json index e986346eee..d9340c7895 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MINIIS 0.6", - "inherits": "Generic PA-CF @Prusa base", "renamed_from": "Prusa Generic PA-CF @MINIIS 0.6;Prusa Generic PA-CF MINIIS 0.6", + "inherits": "Generic PA-CF @Prusa base", "from": "system", "setting_id": "lvYPxwHzVnW29IKZ", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.8.json index 1e3dd13b49..fdaed32273 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MINIIS 0.8", - "inherits": "Generic PA-CF @Prusa base", "renamed_from": "Prusa Generic PA-CF @MINIIS 0.8;Prusa Generic PA-CF MINIIS 0.8", + "inherits": "Generic PA-CF @Prusa base", "from": "system", "setting_id": "LlGpiQAvrrd5bMCs", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS.json index 6c59be3227..f8bd971d8e 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MINIIS", - "inherits": "Generic PA-CF @Prusa base", "renamed_from": "Prusa Generic PA-CF @MINIIS;Prusa Generic PA-CF MINIIS", + "inherits": "Generic PA-CF @Prusa base", "from": "system", "setting_id": "AfQLoOulI6zwAZDg", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.25.json index 8f0622e2cc..6ff68fc59f 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MK3.5 0.25", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA-CF @MK3.5 0.25;Prusa Generic PA-CF MK3.5 0.25", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "15pNQLVuXkSI3zjU", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.6.json index bb6fc654ad..5db76e8298 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA-CF @MK3.5 0.6;Prusa Generic PA-CF MK3.5 0.6", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "3ZKi2gcV6LgJwidS", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.8.json index 2ad7d45932..ec0c9e725e 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA-CF @MK3.5 0.8;Prusa Generic PA-CF MK3.5 0.8", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "Ilehw0Za73eW1Z9v", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5.json index 4150a3f625..e5d4621196 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa MK3.5", - "inherits": "fdm_filament_pa", "renamed_from": "Prusa Generic PA-CF @MK3.5;Prusa Generic PA-CF MK3.5", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "yy2FgYPLARliAAmZ", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa.json b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa.json index f60463913f..74b6736fb2 100644 --- a/resources/profiles/Prusa/filament/Generic PA-CF @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic PA-CF @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Prusa", - "inherits": "Generic PA-CF @Prusa base", "renamed_from": "Prusa Generic PA-CF", + "inherits": "Generic PA-CF @Prusa base", "from": "system", "setting_id": "R2WthJ8gqw8xdajn", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.25.json index 4c50bdca0c..591f5502ad 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MINIIS 0.25", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MINIIS 0.25;Prusa Generic PC MINIIS 0.25", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "v5LHPemQZ8fEQJrX", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.6.json index f6e67d5d5e..4fb6967e5c 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MINIIS 0.6", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MINIIS 0.6;Prusa Generic PC MINIIS 0.6", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "MOLOCn9YKfvHMmOu", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.8.json index ecfa0c6fea..272adbb49c 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MINIIS 0.8", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MINIIS 0.8;Prusa Generic PC MINIIS 0.8", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "eJ9SwUbq1VyHBciM", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS.json index 088f2be363..dfdd628760 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MINIIS", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MINIIS;Prusa Generic PC MINIIS", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "2QWF3WdcbA7ArFgt", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.25.json index dd823e700d..db337c60b1 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MK3.5 0.25", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MK3.5 0.25;Prusa Generic PC MK3.5 0.25", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "MWiCzFnPAeMCWxHz", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.6.json index b33d32e71d..64e7a63dbe 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MK3.5 0.6;Prusa Generic PC MK3.5 0.6", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "KEgDSg0oQi1SQlst", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.8.json index a6fa27ed6d..2564c36995 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MK3.5 0.8;Prusa Generic PC MK3.5 0.8", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "LHNmoFsylIuepyww", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5.json index 1891e65703..5a30930fa6 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa MK3.5", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC @MK3.5;Prusa Generic PC MK3.5", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "awF5u8ojSKhvSYud", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC @Prusa.json b/resources/profiles/Prusa/filament/Generic PC @Prusa.json index 59b97e22e5..c9048035b7 100644 --- a/resources/profiles/Prusa/filament/Generic PC @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic PC @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Prusa", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "UJ5KpqIb5mpcNXzl", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.6.json index dbd6cb209f..37b44b73e6 100644 --- a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC HF @Prusa MINIIS 0.6", - "inherits": "Generic PC HF @Prusa base", "renamed_from": "Prusa Generic PC HF @MINIIS 0.6;Prusa Generic PC HF MINIIS 0.6", + "inherits": "Generic PC HF @Prusa base", "from": "system", "setting_id": "W3G94E0IQo6Kaq8G", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.8.json index 53bc9b96bd..941e0ef406 100644 --- a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC HF @Prusa MINIIS 0.8", - "inherits": "Generic PC HF @Prusa base", "renamed_from": "Prusa Generic PC HF @MINIIS 0.8;Prusa Generic PC HF MINIIS 0.8", + "inherits": "Generic PC HF @Prusa base", "from": "system", "setting_id": "Fjwchj1gB62f7CUF", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS.json index 4d0785504f..a25fdc2957 100644 --- a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC HF @Prusa MINIIS", - "inherits": "Generic PC HF @Prusa base", "renamed_from": "Prusa Generic PC HF @MINIIS;Prusa Generic PC HF MINIIS", + "inherits": "Generic PC HF @Prusa base", "from": "system", "setting_id": "Wodqshgvx38zWaE2", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.6.json index cb2ad5f37c..00b780d238 100644 --- a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC HF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC HF @MK3.5 0.6;Prusa Generic PC HF MK3.5 0.6", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "Rm7U967jnpk74lPA", "filament_id": "OFwwAQnA", diff --git a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.8.json index 0f684bcca8..74ed4537d9 100644 --- a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC HF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC HF @MK3.5 0.8;Prusa Generic PC HF MK3.5 0.8", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "zFkWWW3PTBvuUWqs", "filament_id": "OFwwAQnA", diff --git a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5.json index aa007446ce..f6dcd5d539 100644 --- a/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PC HF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC HF @Prusa MK3.5", - "inherits": "fdm_filament_pc", "renamed_from": "Prusa Generic PC HF @MK3.5;Prusa Generic PC HF MK3.5", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "lvbcRP0xEru9jmms", "filament_id": "OFwwAQnA", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.6.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.6.json index a2f899e88f..4f53e75d4e 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa CORE One 0.6", - "inherits": "Generic PETG @Prusa CORE One", "renamed_from": "Prusa Generic PETG @CORE One 0.6;Prusa Generic PETG CORE One 0.6", + "inherits": "Generic PETG @Prusa CORE One", "from": "system", "setting_id": "oPWpCDB3p6hQeY2F", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.8.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.8.json index 669cf219fc..6e05f1a34c 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa CORE One 0.8", - "inherits": "Generic PETG @Prusa CORE One", "renamed_from": "Prusa Generic PETG @CORE One 0.8;Prusa Generic PETG CORE One 0.8", + "inherits": "Generic PETG @Prusa CORE One", "from": "system", "setting_id": "OmaayFCLuRLadur0", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.4.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.4.json index 6c9ff68c89..510e1d2baf 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.4.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa CORE One HF 0.4", - "inherits": "Generic PETG @Prusa CORE One", "renamed_from": "Prusa Generic PETG @CORE One HF 0.4;Prusa Generic PETG CORE One HF 0.4", + "inherits": "Generic PETG @Prusa CORE One", "from": "system", "setting_id": "7oUyjvRHLH4bJyX0", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.5.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.5.json index 8784e403ab..f28f5f10a3 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.5.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa CORE One HF 0.5", - "inherits": "Generic PETG @Prusa CORE One", "renamed_from": "Prusa Generic PETG @CORE One HF 0.5;Prusa Generic PETG CORE One HF 0.5", + "inherits": "Generic PETG @Prusa CORE One", "from": "system", "setting_id": "6HiIOGURZWwman1l", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.6.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.6.json index c0eb6a594f..53dd49907d 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa CORE One HF 0.6", - "inherits": "Generic PETG @Prusa CORE One", "renamed_from": "Prusa Generic PETG @CORE One HF 0.6;Prusa Generic PETG CORE One HF 0.6", + "inherits": "Generic PETG @Prusa CORE One", "from": "system", "setting_id": "KKiug7A9NOQPe1m7", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.8.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.8.json index 99748978bf..fc9ac8b755 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One HF 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa CORE One HF 0.8", - "inherits": "Generic PETG @Prusa CORE One", "renamed_from": "Prusa Generic PETG @CORE One HF 0.8;Prusa Generic PETG CORE One HF 0.8", + "inherits": "Generic PETG @Prusa CORE One", "from": "system", "setting_id": "vtiAC44hrmtap0Ou", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..c026e6d770 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic PETG @Prusa CORE One MMU3", + "inherits": "Generic PETG @Prusa CORE One", + "from": "system", + "setting_id": "JutuB6ct5A1l2Biz", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One.json index a086fb9336..1c940b74b1 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa CORE One.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa CORE One", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG @CORE One;Prusa Generic PETG CORE One", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "W71PW5bpf7CV16D4", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.25.json index 282048f6a3..a6e262c483 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MINIIS 0.25", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG @MINIIS 0.25;Prusa Generic PETG MINIIS 0.25", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "lKegAyiWytPNEXH0", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.6.json index 40f6d0c685..d0f73f75ef 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MINIIS 0.6", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG @MINIIS 0.6;Prusa Generic PETG MINIIS 0.6", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "7QT1EXl4qKoNBuqz", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.8.json index a578482dc0..353d01603c 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MINIIS 0.8", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG @MINIIS 0.8;Prusa Generic PETG MINIIS 0.8", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "zl2HOUtcoIR2dFQH", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS.json index 5a135dfd2d..c5df3291e1 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MINIIS", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG @MINIIS;Prusa Generic PETG MINIIS", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "COQ9qpnYRGAFRBoq", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.25.json index e338514096..66cbb86acc 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK3.5 0.25", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG @MK3.5 0.25;Prusa Generic PETG MK3.5 0.25", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "M0vmzxmP3IVIUTuv", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.6.json index d57e0fdb3f..9ffccc5462 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG @MK3.5 0.6;Prusa Generic PETG MK3.5 0.6", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "OvkhxGhjjRMjwb4C", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.8.json index 59e45d94f6..1b83f6983e 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG @MK3.5 0.8;Prusa Generic PETG MK3.5 0.8", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "kZSlkCTdghAi8LFG", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5.json index 7d63599c7a..4d868e63e0 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK3.5", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG @MK3.5;Prusa Generic PETG MK3.5", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "6PUbXHNUBfWjVvse", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4.json index 68f627daa4..167303226a 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG @MK4;Prusa Generic PETG MK4", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "ieo6hcpwnV0j76eo", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.6.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.6.json index ddfbb665be..f755d3343c 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4S 0.6", - "inherits": "Generic PETG @Prusa MK4S", "renamed_from": "Prusa Generic PETG @MK4S 0.6;Prusa Generic PETG MK4S 0.6", + "inherits": "Generic PETG @Prusa MK4S", "from": "system", "setting_id": "z5Ys1AU5ujQF9D5U", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.8.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.8.json index 8e8fee1973..77aabc46a0 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4S 0.8", - "inherits": "Generic PETG @Prusa MK4S", "renamed_from": "Prusa Generic PETG @MK4S 0.8;Prusa Generic PETG MK4S 0.8", + "inherits": "Generic PETG @Prusa MK4S", "from": "system", "setting_id": "LKUzA7cbyYL6kxar", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.4.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.4.json index ebbdb73717..ef4945eb07 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.4.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4S HF0.4", - "inherits": "Generic PETG @Prusa MK4S", "renamed_from": "Prusa Generic PETG @MK4S HF0.4;Prusa Generic PETG MK4S HF0.4", + "inherits": "Generic PETG @Prusa MK4S", "from": "system", "setting_id": "lLapCyweW6Svj7cV", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.5.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.5.json index e424f13c82..ba6a2d5373 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.5.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4S HF0.5", - "inherits": "Generic PETG @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic PETG @MK4S HF0.5;Prusa Generic PETG MK4S HF0.5", + "inherits": "Generic PETG @Prusa MK4S HF0.4", "from": "system", "setting_id": "lu9twhsjDkBT1kyn", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.6.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.6.json index c0d46b3ca1..2835358872 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4S HF0.6", - "inherits": "Generic PETG @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic PETG @MK4S HF0.6;Prusa Generic PETG MK4S HF0.6", + "inherits": "Generic PETG @Prusa MK4S HF0.4", "from": "system", "setting_id": "d7ocKzA4YSAit63Z", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.8.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.8.json index 237c3f116a..cb2834ee4b 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S HF0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4S HF0.8", - "inherits": "Generic PETG @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic PETG @MK4S HF0.8;Prusa Generic PETG MK4S HF0.8", + "inherits": "Generic PETG @Prusa MK4S HF0.4", "from": "system", "setting_id": "HSBSswxwznxDClK5", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S.json index b7bbc6094e..8126c317cd 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa MK4S.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa MK4S", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG @MK4S;Prusa Generic PETG MK4S", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "t3ZCKWVct5d69cb8", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Prusa/filament/Generic PETG @Prusa.json b/resources/profiles/Prusa/filament/Generic PETG @Prusa.json index 6881507204..dd9029f4c4 100644 --- a/resources/profiles/Prusa/filament/Generic PETG @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic PETG @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Prusa", - "inherits": "Generic PETG @Prusa base", "renamed_from": "Prusa Generic PETG", + "inherits": "Generic PETG @Prusa base", "from": "system", "setting_id": "Vwc0owmwoEYrLhuU", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.6.json index e8de400490..24584986f2 100644 --- a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG HF @Prusa MINIIS 0.6", - "inherits": "Generic PETG HF @Prusa base", "renamed_from": "Prusa Generic PETG HF @MINIIS 0.6;Prusa Generic PETG HF MINIIS 0.6", + "inherits": "Generic PETG HF @Prusa base", "from": "system", "setting_id": "nF8YzRMvaT4D8LBD", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.8.json index adc5401268..5a50d4e42c 100644 --- a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG HF @Prusa MINIIS 0.8", - "inherits": "Generic PETG HF @Prusa base", "renamed_from": "Prusa Generic PETG HF @MINIIS 0.8;Prusa Generic PETG HF MINIIS 0.8", + "inherits": "Generic PETG HF @Prusa base", "from": "system", "setting_id": "7itUjrAu9Oj9hxiU", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS.json index 9148f5e849..1c2f083063 100644 --- a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG HF @Prusa MINIIS", - "inherits": "Generic PETG HF @Prusa base", "renamed_from": "Prusa Generic PETG HF @MINIIS;Prusa Generic PETG HF MINIIS", + "inherits": "Generic PETG HF @Prusa base", "from": "system", "setting_id": "dPNOryBcrviemefo", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.6.json index 71481537b1..c799624fcf 100644 --- a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG HF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG HF @MK3.5 0.6;Prusa Generic PETG HF MK3.5 0.6", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "YqVidH7m1HXR3hHZ", "filament_id": "OF7lOgYF", diff --git a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.8.json index 5dffe82d0b..e5811d0eb7 100644 --- a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG HF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG HF @MK3.5 0.8;Prusa Generic PETG HF MK3.5 0.8", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "vfR067tK5WsrE4pw", "filament_id": "OF7lOgYF", diff --git a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5.json index e343519efd..c5bcb47158 100644 --- a/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PETG HF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG HF @Prusa MK3.5", - "inherits": "fdm_filament_pet", "renamed_from": "Prusa Generic PETG HF @MK3.5;Prusa Generic PETG HF MK3.5", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "grvZIUU79fxDOa3O", "filament_id": "OF7lOgYF", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.6.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.6.json index 2e2f9275d4..009a827c7f 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa CORE One 0.6", - "inherits": "Generic PLA @Prusa CORE One", "renamed_from": "Prusa Generic PLA @CORE One 0.6;Prusa Generic PLA CORE One 0.6", + "inherits": "Generic PLA @Prusa CORE One", "from": "system", "setting_id": "IkmLxDwrdRkacHWw", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.8.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.8.json index cfe88119de..18a60b5cc1 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa CORE One 0.8", - "inherits": "Generic PLA @Prusa CORE One", "renamed_from": "Prusa Generic PLA @CORE One 0.8;Prusa Generic PLA CORE One 0.8", + "inherits": "Generic PLA @Prusa CORE One", "from": "system", "setting_id": "aBengWdqRXg9i2sx", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.4.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.4.json index c0969904c7..e821c4d97d 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.4.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa CORE One HF 0.4", - "inherits": "Generic PLA @Prusa CORE One", "renamed_from": "Prusa Generic PLA @CORE One HF 0.4;Prusa Generic PLA CORE One HF 0.4", + "inherits": "Generic PLA @Prusa CORE One", "from": "system", "setting_id": "vniEPaoyABoAfLFa", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.5.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.5.json index 5d6e9fcba2..af02d26924 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.5.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa CORE One HF 0.5", - "inherits": "Generic PLA @Prusa CORE One", "renamed_from": "Prusa Generic PLA @CORE One HF 0.5;Prusa Generic PLA CORE One HF 0.5", + "inherits": "Generic PLA @Prusa CORE One", "from": "system", "setting_id": "NPEs4gtBlKWupYZX", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.6.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.6.json index 6575aebf8d..dd830e04cd 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa CORE One HF 0.6", - "inherits": "Generic PLA @Prusa CORE One", "renamed_from": "Prusa Generic PLA @CORE One HF 0.6;Prusa Generic PLA CORE One HF 0.6", + "inherits": "Generic PLA @Prusa CORE One", "from": "system", "setting_id": "SnfULjrWGCiA7ljq", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.8.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.8.json index 64471ba72b..45efb6df87 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One HF 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa CORE One HF 0.8", - "inherits": "Generic PLA @Prusa CORE One", "renamed_from": "Prusa Generic PLA @CORE One HF 0.8;Prusa Generic PLA CORE One HF 0.8", + "inherits": "Generic PLA @Prusa CORE One", "from": "system", "setting_id": "ZsIuxJUaBzoeWPDv", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..32498fb8a9 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic PLA @Prusa CORE One MMU3", + "inherits": "Generic PLA @Prusa CORE One", + "from": "system", + "setting_id": "haNaA1KFlYeqtfIg", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.022{elsif nozzle_diameter[filament_extruder_id]==0.6}0.019{elsif nozzle_diameter[filament_extruder_id]==0.8}0.013{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One.json index 9bc9e086b0..d16a6c0366 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa CORE One.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa CORE One", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA @CORE One;Prusa Generic PLA CORE One", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "r2i4c7DsYXYIMVCX", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.25.json index 3682a6fcb0..1ac72b15e4 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MINIIS 0.25", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA @MINIIS 0.25;Prusa Generic PLA MINIIS 0.25", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "t7jm6WSfRqsdSZfz", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.6.json index ae982f46bc..2701d684c6 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MINIIS 0.6", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA @MINIIS 0.6;Prusa Generic PLA MINIIS 0.6", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "hWk01xYl6gu41B4w", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.8.json index 8a5897d741..77defbf7c1 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MINIIS 0.8", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA @MINIIS 0.8;Prusa Generic PLA MINIIS 0.8", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "6A9NivZl5nMpNfsz", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS.json index cf2adda390..1a3429b6a7 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MINIIS", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA @MINIIS;Prusa Generic PLA MINIIS", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "3bPlO5U5udlu8eVv", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.25.json index b3f84dc4e1..3e831471cf 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK3.5 0.25", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA @MK3.5 0.25;Prusa Generic PLA MK3.5 0.25", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "IJsZsvdG7N8uwobX", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.6.json index 49d75d5e31..d75f11c181 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA @MK3.5 0.6;Prusa Generic PLA MK3.5 0.6", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "YLx95teMRy5UQWKN", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.8.json index 6590e43c17..0cadf43880 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA @MK3.5 0.8;Prusa Generic PLA MK3.5 0.8", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "bZ42VSqIaJlri1VH", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5.json index 058e05e99e..75bd9f92d2 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK3.5", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA @MK3.5;Prusa Generic PLA MK3.5", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "5tDjTVPzE0lIEReK", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4.json index e7cc5df0d8..548980044c 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA @MK4;Prusa Generic PLA MK4", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "cBqjSJcxcXvS8sY0", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.6.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.6.json index bcc0847385..ab91482338 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4S 0.6", - "inherits": "Generic PLA @Prusa MK4S", "renamed_from": "Prusa Generic PLA @MK4S 0.6;Prusa Generic PLA MK4S 0.6", + "inherits": "Generic PLA @Prusa MK4S", "from": "system", "setting_id": "vLeTzdoXExkeNSdX", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.8.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.8.json index e574ce49a5..92ae855bfe 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4S 0.8", - "inherits": "Generic PLA @Prusa MK4S", "renamed_from": "Prusa Generic PLA @MK4S 0.8;Prusa Generic PLA MK4S 0.8", + "inherits": "Generic PLA @Prusa MK4S", "from": "system", "setting_id": "6fyFsevbPLYfgZRb", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.4.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.4.json index 10e37500a8..6ba97466d4 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.4.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4S HF0.4", - "inherits": "Generic PLA @Prusa MK4S", "renamed_from": "Prusa Generic PLA @MK4S HF0.4;Prusa Generic PLA MK4S HF0.4", + "inherits": "Generic PLA @Prusa MK4S", "from": "system", "setting_id": "BFvt90DhCobphEF9", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.5.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.5.json index ec1efb5aad..9c227baa46 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.5.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4S HF0.5", - "inherits": "Generic PLA @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic PLA @MK4S HF0.5;Prusa Generic PLA MK4S HF0.5", + "inherits": "Generic PLA @Prusa MK4S HF0.4", "from": "system", "setting_id": "IDv2UUR8EH7AVUIA", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.6.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.6.json index 8ce85314dd..5f9bbba153 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4S HF0.6", - "inherits": "Generic PLA @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic PLA @MK4S HF0.6;Prusa Generic PLA MK4S HF0.6", + "inherits": "Generic PLA @Prusa MK4S HF0.4", "from": "system", "setting_id": "t7cAPFNPWmeHBeuD", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.8.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.8.json index 968bf56356..383c210e4f 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S HF0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4S HF0.8", - "inherits": "Generic PLA @Prusa MK4S HF0.4", "renamed_from": "Prusa Generic PLA @MK4S HF0.8;Prusa Generic PLA MK4S HF0.8", + "inherits": "Generic PLA @Prusa MK4S HF0.4", "from": "system", "setting_id": "t1a58q4l6Xo6kKCC", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S.json index a847cf8334..be71cb6113 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa MK4S.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa MK4S", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA @MK4S;Prusa Generic PLA MK4S", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "lsjHMlvwZzImWgek", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Prusa/filament/Generic PLA @Prusa.json b/resources/profiles/Prusa/filament/Generic PLA @Prusa.json index 83951fb4ab..5e262da446 100644 --- a/resources/profiles/Prusa/filament/Generic PLA @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic PLA @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Prusa", - "inherits": "Generic PLA @Prusa base", "renamed_from": "Prusa Generic PLA", + "inherits": "Generic PLA @Prusa base", "from": "system", "setting_id": "SBviEhhXcdsIwj0y", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.6.json index 56c2e823b0..9459c8734a 100644 --- a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA HF @Prusa MINIIS 0.6", - "inherits": "Generic PLA HF @Prusa base", "renamed_from": "Prusa Generic PLA HF @MINIIS 0.6;Prusa Generic PLA HF MINIIS 0.6", + "inherits": "Generic PLA HF @Prusa base", "from": "system", "setting_id": "eqBN6ykUB4csEMCR", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.8.json index be0722c134..232e4b6638 100644 --- a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA HF @Prusa MINIIS 0.8", - "inherits": "Generic PLA HF @Prusa base", "renamed_from": "Prusa Generic PLA HF @MINIIS 0.8;Prusa Generic PLA HF MINIIS 0.8", + "inherits": "Generic PLA HF @Prusa base", "from": "system", "setting_id": "FuCHQFBuP9yLUzT0", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS.json index 656c756e6d..c59708df52 100644 --- a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA HF @Prusa MINIIS", - "inherits": "Generic PLA HF @Prusa base", "renamed_from": "Prusa Generic PLA HF @MINIIS;Prusa Generic PLA HF MINIIS", + "inherits": "Generic PLA HF @Prusa base", "from": "system", "setting_id": "cQJUt7LR5hkKT0Za", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.6.json index 41dce0b5ed..e738c7104e 100644 --- a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA HF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA HF @MK3.5 0.6;Prusa Generic PLA HF MK3.5 0.6", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "5vgrugarZSgMZ6FT", "filament_id": "OFZr862X", diff --git a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.8.json index b6af02d8fb..90ce533d55 100644 --- a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA HF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA HF @MK3.5 0.8;Prusa Generic PLA HF MK3.5 0.8", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "CM3EYkpRcWwsw7KB", "filament_id": "OFZr862X", diff --git a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5.json index 46ed4d0752..a4a7e5a583 100644 --- a/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PLA HF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA HF @Prusa MK3.5", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA HF @MK3.5;Prusa Generic PLA HF MK3.5", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "4N82rUxi9Bbm2Cdd", "filament_id": "OFZr862X", diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.6.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.6.json index aeeba4d5ee..7772677dad 100644 --- a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Prusa CORE One 0.6", - "inherits": "Generic PLA Silk @Prusa CORE One", "renamed_from": "Prusa Generic PLA Silk @CORE One 0.6;Prusa Generic PLA Silk CORE One 0.6", + "inherits": "Generic PLA Silk @Prusa CORE One", "from": "system", "setting_id": "nBWqKjSKw2UEAmkv", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.8.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.8.json index 82e3840d37..8eddb354ab 100644 --- a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Prusa CORE One 0.8", - "inherits": "Generic PLA Silk @Prusa CORE One", "renamed_from": "Prusa Generic PLA Silk @CORE One 0.8;Prusa Generic PLA Silk CORE One 0.8", + "inherits": "Generic PLA Silk @Prusa CORE One", "from": "system", "setting_id": "a2KWbhOMQrFTkAZh", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..d45bd3cd90 --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @Prusa CORE One MMU3", + "inherits": "Generic PLA Silk @Prusa CORE One", + "from": "system", + "setting_id": "MMarDGtK4f7u78gA", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.5}0.022{elsif nozzle_diameter[0]==0.6}0.018{elsif nozzle_diameter[0]==0.8}0.012{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.075{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One.json index c11965fc72..ba4c693334 100644 --- a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One.json +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa CORE One.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Prusa CORE One", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA Silk @CORE One;Prusa Generic PLA Silk CORE One", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "F9lNHyhZwZi7aD74", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.6.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.6.json index 82413605dc..29df44572b 100644 --- a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Prusa MK4S 0.6", - "inherits": "Generic PLA Silk @Prusa MK4S", "renamed_from": "Prusa Generic PLA Silk @MK4S 0.6;Prusa Generic PLA Silk MK4S 0.6", + "inherits": "Generic PLA Silk @Prusa MK4S", "from": "system", "setting_id": "lWYrhnu1MUizrdOB", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.8.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.8.json index e94cbdf57a..1342eb8ce2 100644 --- a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Prusa MK4S 0.8", - "inherits": "Generic PLA Silk @Prusa MK4S", "renamed_from": "Prusa Generic PLA Silk @MK4S 0.8;Prusa Generic PLA Silk MK4S 0.8", + "inherits": "Generic PLA Silk @Prusa MK4S", "from": "system", "setting_id": "cyBdMwJ5sAZcQ7wP", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S.json b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S.json index 9a3830fd4a..6f3149cb30 100644 --- a/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S.json +++ b/resources/profiles/Prusa/filament/Generic PLA Silk @Prusa MK4S.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Prusa MK4S", - "inherits": "Generic PLA @Prusa MK4S", "renamed_from": "Prusa Generic PLA Silk @MK4S;Prusa Generic PLA Silk MK4S", + "inherits": "Generic PLA @Prusa MK4S", "from": "system", "setting_id": "9VQ1YVv9EZexIUoF", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.25.json index 9432c36087..201fc6558b 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MINIIS 0.25", - "inherits": "Generic PLA-CF @Prusa base", "renamed_from": "Prusa Generic PLA-CF @MINIIS 0.25;Prusa Generic PLA-CF MINIIS 0.25", + "inherits": "Generic PLA-CF @Prusa base", "from": "system", "setting_id": "uQJghHEl91slhmEP", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.6.json index 7900e25ab2..97708e2263 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MINIIS 0.6", - "inherits": "Generic PLA-CF @Prusa base", "renamed_from": "Prusa Generic PLA-CF @MINIIS 0.6;Prusa Generic PLA-CF MINIIS 0.6", + "inherits": "Generic PLA-CF @Prusa base", "from": "system", "setting_id": "nZEIrx6XaOFsNyHS", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.8.json index 97db4345c8..df0fd97bb1 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MINIIS 0.8", - "inherits": "Generic PLA-CF @Prusa base", "renamed_from": "Prusa Generic PLA-CF @MINIIS 0.8;Prusa Generic PLA-CF MINIIS 0.8", + "inherits": "Generic PLA-CF @Prusa base", "from": "system", "setting_id": "A3VUqeRysd3c5Txq", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS.json index 4c08a4b23c..532dc5f299 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MINIIS", - "inherits": "Generic PLA-CF @Prusa base", "renamed_from": "Prusa Generic PLA-CF @MINIIS;Prusa Generic PLA-CF MINIIS", + "inherits": "Generic PLA-CF @Prusa base", "from": "system", "setting_id": "cNZereL1ltFYG5FZ", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.25.json index 436bf22209..7174067503 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MK3.5 0.25", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA-CF @MK3.5 0.25;Prusa Generic PLA-CF MK3.5 0.25", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "eID2rl5MlHlkerrQ", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.6.json index db1973c5c8..f81dea6a16 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA-CF @MK3.5 0.6;Prusa Generic PLA-CF MK3.5 0.6", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "FGXPEP83zLoINOZy", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.8.json index bfcbcf2dbc..9d1d02d6c3 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA-CF @MK3.5 0.8;Prusa Generic PLA-CF MK3.5 0.8", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "TM5JPaNUTlZTiuCe", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5.json index 677bbc0d27..5bbd23098d 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa MK3.5", - "inherits": "fdm_filament_pla", "renamed_from": "Prusa Generic PLA-CF @MK3.5;Prusa Generic PLA-CF MK3.5", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "3qImFrQCon7iUj4c", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa.json b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa.json index c572b9f67c..b57c07f4a2 100644 --- a/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic PLA-CF @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Prusa", - "inherits": "Generic PLA-CF @Prusa base", "renamed_from": "Prusa Generic PLA-CF", + "inherits": "Generic PLA-CF @Prusa base", "from": "system", "setting_id": "LIL5n1PzMoaNoJ84", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.25.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.25.json index f74228304a..a0485636b5 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MINIIS 0.25", - "inherits": "Generic PVA @Prusa base", "renamed_from": "Prusa Generic PVA @MINIIS 0.25;Prusa Generic PVA MINIIS 0.25", + "inherits": "Generic PVA @Prusa base", "from": "system", "setting_id": "2TecWVXOXcxW37EN", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.6.json index f25c70a70c..7827888a46 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MINIIS 0.6", - "inherits": "Generic PVA @Prusa base", "renamed_from": "Prusa Generic PVA @MINIIS 0.6;Prusa Generic PVA MINIIS 0.6", + "inherits": "Generic PVA @Prusa base", "from": "system", "setting_id": "3UTClbjiwrQUCXsV", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.8.json index 90c4fc2256..1313511a55 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MINIIS 0.8", - "inherits": "Generic PVA @Prusa base", "renamed_from": "Prusa Generic PVA @MINIIS 0.8;Prusa Generic PVA MINIIS 0.8", + "inherits": "Generic PVA @Prusa base", "from": "system", "setting_id": "RKxewqskgDD2DQTk", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS.json index 99014f18a3..221a384ebc 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MINIIS", - "inherits": "Generic PVA @Prusa base", "renamed_from": "Prusa Generic PVA @MINIIS;Prusa Generic PVA MINIIS", + "inherits": "Generic PVA @Prusa base", "from": "system", "setting_id": "XfJmxNhCJiWTWB9i", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.25.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.25.json index a13990f6c7..28d8b6eff4 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.25.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.25.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MK3.5 0.25", - "inherits": "fdm_filament_pva", "renamed_from": "Prusa Generic PVA @MK3.5 0.25;Prusa Generic PVA MK3.5 0.25", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "P9y77rdSQsCFcFwr", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.6.json index 8854a19282..8543ffbf2d 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pva", "renamed_from": "Prusa Generic PVA @MK3.5 0.6;Prusa Generic PVA MK3.5 0.6", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "rvSzvHZL6FIiOQV1", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.8.json index 718845dc9a..d2c6e71ab8 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pva", "renamed_from": "Prusa Generic PVA @MK3.5 0.8;Prusa Generic PVA MK3.5 0.8", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "E2sA3y3Cyp0UsQD4", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5.json index 6e1e1c9381..5d895dd35f 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa MK3.5", - "inherits": "fdm_filament_pva", "renamed_from": "Prusa Generic PVA @MK3.5;Prusa Generic PVA MK3.5", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "UTyXSJox9HVdwfXR", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Prusa/filament/Generic PVA @Prusa.json b/resources/profiles/Prusa/filament/Generic PVA @Prusa.json index 3ad6ba8337..5d11a4e854 100644 --- a/resources/profiles/Prusa/filament/Generic PVA @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic PVA @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Prusa", - "inherits": "Generic PVA @Prusa base", "renamed_from": "Prusa Generic PVA", + "inherits": "Generic PVA @Prusa base", "from": "system", "setting_id": "uVzUlzHkXz6rH1ml", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.6.json b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.6.json index f4e03d791f..b6d9877fe8 100644 --- a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA HF @Prusa MINIIS 0.6", - "inherits": "Generic PVA HF @Prusa base", "renamed_from": "Prusa Generic PVA HF @MINIIS 0.6;Prusa Generic PVA HF MINIIS 0.6", + "inherits": "Generic PVA HF @Prusa base", "from": "system", "setting_id": "qeWFOMhrKa1yezHw", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.8.json b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.8.json index e8935f9172..55510df02d 100644 --- a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA HF @Prusa MINIIS 0.8", - "inherits": "Generic PVA HF @Prusa base", "renamed_from": "Prusa Generic PVA HF @MINIIS 0.8;Prusa Generic PVA HF MINIIS 0.8", + "inherits": "Generic PVA HF @Prusa base", "from": "system", "setting_id": "h0RQ3XME0UFEeZVA", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS.json index a4a131da97..d15d79a5a1 100644 --- a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA HF @Prusa MINIIS", - "inherits": "Generic PVA HF @Prusa base", "renamed_from": "Prusa Generic PVA HF @MINIIS;Prusa Generic PVA HF MINIIS", + "inherits": "Generic PVA HF @Prusa base", "from": "system", "setting_id": "VZcvmjCAtivpMepD", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.6.json b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.6.json index 1b78b6b0bc..299a2925c0 100644 --- a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.6.json +++ b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA HF @Prusa MK3.5 0.6", - "inherits": "fdm_filament_pva", "renamed_from": "Prusa Generic PVA HF @MK3.5 0.6;Prusa Generic PVA HF MK3.5 0.6", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "8R3yU9OjRFBIp1nU", "filament_id": "OFDwBwO5", diff --git a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.8.json b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.8.json index 94f635382e..b7793a0dcf 100644 --- a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.8.json +++ b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA HF @Prusa MK3.5 0.8", - "inherits": "fdm_filament_pva", "renamed_from": "Prusa Generic PVA HF @MK3.5 0.8;Prusa Generic PVA HF MK3.5 0.8", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "OOUVHHPIB95wqeTB", "filament_id": "OFDwBwO5", diff --git a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5.json index c3749316e9..9b50e42404 100644 --- a/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic PVA HF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA HF @Prusa MK3.5", - "inherits": "fdm_filament_pva", "renamed_from": "Prusa Generic PVA HF @MK3.5;Prusa Generic PVA HF MK3.5", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "gTh9PfBYkibWdknz", "filament_id": "OFDwBwO5", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.6.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.6.json index dc68ea318c..018ffeb1b7 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.6.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa CORE One 0.6", - "inherits": "Generic TPU @Prusa CORE One", "renamed_from": "Prusa Generic TPU @CORE One 0.6;Prusa Generic TPU CORE One 0.6", + "inherits": "Generic TPU @Prusa CORE One", "from": "system", "setting_id": "VvvSk3OsXXxyerAX", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.8.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.8.json index 93b68e0afa..c4d79ea162 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.8.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa CORE One 0.8", - "inherits": "Generic TPU @Prusa CORE One", "renamed_from": "Prusa Generic TPU @CORE One 0.8;Prusa Generic TPU CORE One 0.8", + "inherits": "Generic TPU @Prusa CORE One", "from": "system", "setting_id": "LUUEXi6UUk0Zs5Pf", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One MMU3.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One MMU3.json new file mode 100644 index 0000000000..7aa75a058f --- /dev/null +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One MMU3.json @@ -0,0 +1,53 @@ +{ + "type": "filament", + "name": "Generic TPU @Prusa CORE One MMU3", + "inherits": "Generic TPU @Prusa CORE One", + "from": "system", + "setting_id": "pYEUfg7uqu2LGw2n", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.4" + ], + "filament_cooling_initial_speed": [ + "2.2" + ], + "filament_cooling_moves": [ + "4" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "28" + ], + "filament_loading_speed_start": [ + "3" + ], + "filament_ramming_parameters": [ + "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6" + ], + "filament_stamping_distance": [ + "0" + ], + "filament_stamping_loading_speed": [ + "0" + ], + "filament_start_gcode": [ + "M900 K0 ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "90" + ], + "filament_unloading_speed_start": [ + "100" + ], + "idle_temperature": [ + "150" + ] +} diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One.json index 3717f8586a..ae0a3edf7b 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa CORE One.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa CORE One", - "inherits": "fdm_filament_flex", "renamed_from": "Prusa Generic TPU @CORE One;Prusa Generic TPU CORE One", + "inherits": "fdm_filament_flex", "from": "system", "setting_id": "jsXqf9CeaXCvsrWM", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa MINIIS.json index 85c60e64a8..f76317163d 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa MINIIS", - "inherits": "Generic TPU @Prusa base", "renamed_from": "Prusa Generic TPU @MINIIS;Prusa Generic TPU MINIIS", + "inherits": "Generic TPU @Prusa base", "from": "system", "setting_id": "bOai5Ib1dggl5Qlc", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK3.5.json index 3e72481ea7..65c6989baf 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa MK3.5", - "inherits": "fdm_filament_tpu", "renamed_from": "Prusa Generic TPU @MK3.5;Prusa Generic TPU MK3.5", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "j6bDPJnwtsB16yBu", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4.json index 52c7ebf182..cc2959bcc5 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa MK4", - "inherits": "Generic TPU @Prusa base", "renamed_from": "Prusa Generic TPU @MK4;Prusa Generic TPU MK4", + "inherits": "Generic TPU @Prusa base", "from": "system", "setting_id": "9wL3LAJZ7PyqBVEb", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.6.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.6.json index 4b5399bd89..674f3bf3d4 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.6.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.6.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa MK4S 0.6", - "inherits": "Generic TPU @Prusa MK4S", "renamed_from": "Prusa Generic TPU @MK4S 0.6;Prusa Generic TPU MK4S 0.6", + "inherits": "Generic TPU @Prusa MK4S", "from": "system", "setting_id": "XM427EDbbCgt2wNZ", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.8.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.8.json index 3a663958f1..a10c0bb03c 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.8.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S 0.8.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa MK4S 0.8", - "inherits": "Generic TPU @Prusa MK4S", "renamed_from": "Prusa Generic TPU @MK4S 0.8;Prusa Generic TPU MK4S 0.8", + "inherits": "Generic TPU @Prusa MK4S", "from": "system", "setting_id": "2UPIZFNertdlZ4o2", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S.json index 75f1895c87..beeefc6393 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa MK4S.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa MK4S", - "inherits": "fdm_filament_tpu", "renamed_from": "Prusa Generic TPU @MK4S;Prusa Generic TPU MK4S", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "wdopbtHBnMKC2rhj", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Prusa/filament/Generic TPU @Prusa.json b/resources/profiles/Prusa/filament/Generic TPU @Prusa.json index 95048f947c..0e51d2d827 100644 --- a/resources/profiles/Prusa/filament/Generic TPU @Prusa.json +++ b/resources/profiles/Prusa/filament/Generic TPU @Prusa.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Prusa", - "inherits": "Generic TPU @Prusa base", "renamed_from": "Prusa Generic TPU", + "inherits": "Generic TPU @Prusa base", "from": "system", "setting_id": "bmtq13tfalfSTRrO", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MINIIS.json b/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MINIIS.json index 4c4ab81b42..dc35f57d09 100644 --- a/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MINIIS.json +++ b/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MINIIS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU HF @Prusa MINIIS", - "inherits": "Generic TPU HF @Prusa base", "renamed_from": "Prusa Generic TPU HF @MINIIS;Prusa Generic TPU HF MINIIS", + "inherits": "Generic TPU HF @Prusa base", "from": "system", "setting_id": "Jw1UjgrXtYG5rMDt", "instantiation": "true", diff --git a/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MK3.5.json b/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MK3.5.json index f958cac588..cc0c571567 100644 --- a/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MK3.5.json +++ b/resources/profiles/Prusa/filament/Generic TPU HF @Prusa MK3.5.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU HF @Prusa MK3.5", - "inherits": "fdm_filament_tpu", "renamed_from": "Prusa Generic TPU HF @MK3.5;Prusa Generic TPU HF MK3.5", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "W8pYAV5JMW70PKlw", "filament_id": "OFnT7Qpb", diff --git a/resources/profiles/Prusa/filament/Prusament ASA @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament ASA @CORE One MMU3.json new file mode 100644 index 0000000000..6f415ba213 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament ASA @CORE One MMU3", + "inherits": "Prusament ASA @CORE One", + "from": "system", + "setting_id": "pESQ8XminojyIGyw", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK3S.json b/resources/profiles/Prusa/filament/Prusament ASA @MK3S.json new file mode 100644 index 0000000000..c8d17cbd59 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK3S.json @@ -0,0 +1,39 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK3S", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "6axLRDqyMzSKivpv", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "filament_cost": [ + "35.28" + ], + "filament_density": [ + "1.07" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_max_volumetric_speed": [ + "11" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "ASA" + ], + "filament_vendor": [ + "Prusa Polymers" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4.json new file mode 100644 index 0000000000..10f5a90ebf --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4.json @@ -0,0 +1,39 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "S4liaSXDqOT1o64k", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "filament_cost": [ + "35.28" + ], + "filament_density": [ + "1.07" + ], + "filament_flow_ratio": [ + "0.93" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "ASA" + ], + "filament_vendor": [ + "Prusa Polymers" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4S 0.6.json new file mode 100644 index 0000000000..20372c4e3d --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4S 0.6.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4S 0.6", + "inherits": "Prusament ASA @MK4S", + "from": "system", + "setting_id": "NjWtcE6qB6wUa6pc", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "nozzle_temperature": "255", + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4S 0.8.json new file mode 100644 index 0000000000..8960cd8cdd --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4S 0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4S 0.8", + "inherits": "Prusament ASA @MK4S", + "from": "system", + "setting_id": "Xeqlb6XMZBWZtRkd", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "slow_down_layer_time": "18" +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.4.json new file mode 100644 index 0000000000..85bb74a8a9 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.4.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4S HF0.4", + "inherits": "Prusament ASA @MK4S", + "from": "system", + "setting_id": "1N3BqmbZKCKh8v9N", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_max_volumetric_speed": [ + "26" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp" + ], + "nozzle_temperature": "265", + "nozzle_temperature_initial_layer": "265", + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.5.json new file mode 100644 index 0000000000..451f4c4fe0 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.5.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4S HF0.5", + "inherits": "Prusament ASA @MK4S", + "from": "system", + "setting_id": "Se12CQUzRlCv6pHb", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ], + "filament_max_volumetric_speed": [ + "27" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.6.json new file mode 100644 index 0000000000..d2903f606a --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.6.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4S HF0.6", + "inherits": "Prusament ASA @MK4S", + "from": "system", + "setting_id": "ejFx8rfOt0hqS3kG", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "filament_max_volumetric_speed": [ + "34" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.8.json new file mode 100644 index 0000000000..49536b1aeb --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4S HF0.8.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4S HF0.8", + "inherits": "Prusament ASA @MK4S", + "from": "system", + "setting_id": "fEVn3NwNrLU1NeWg", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "filament_max_volumetric_speed": [ + "36" + ], + "nozzle_temperature": "270", + "nozzle_temperature_initial_layer": "270", + "slow_down_layer_time": "20" +} diff --git a/resources/profiles/Prusa/filament/Prusament ASA @MK4S.json b/resources/profiles/Prusa/filament/Prusament ASA @MK4S.json new file mode 100644 index 0000000000..1d04b9b114 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament ASA @MK4S.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Prusament ASA @MK4S", + "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "Gciz1m8uMxV9wogi", + "filament_id": "OFmFwUWM", + "instantiation": "true", + "close_fan_the_first_x_layers": "4", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "default_filament_colour": "#FFF2EC", + "fan_cooling_layer_time": "20", + "fan_max_speed": "12", + "fan_min_speed": "12", + "filament_cost": [ + "35.28" + ], + "filament_density": [ + "1.07" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_minimal_purge_on_wipe_tower": "35", + "filament_notes": [ + "" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "ASA" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": "110", + "overhang_fan_speed": "20", + "slow_down_layer_time": "10", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PA-CF @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PA-CF @CORE One MMU3.json new file mode 100644 index 0000000000..cfdc1c5412 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA-CF @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PA-CF @CORE One MMU3", + "inherits": "Prusament PA-CF @CORE One", + "from": "system", + "setting_id": "DsvJLtFStnmOCm1m", + "filament_id": "OF54SvEe", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK3S.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK3S.json new file mode 100644 index 0000000000..3a791d2d61 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK3S.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK3S", + "inherits": "fdm_filament_pa11cf", + "from": "system", + "setting_id": "NwYUwfN9nhSfE2C1", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "filament_cost": [ + "124.99" + ], + "filament_density": [ + "1.11" + ], + "filament_max_volumetric_speed": [ + "6.5" + ], + "filament_spool_weight": [ + "197" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "PA11-CF" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "285" + ], + "nozzle_temperature_initial_layer": [ + "275" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4.json new file mode 100644 index 0000000000..aa9b5edef1 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4", + "inherits": "fdm_filament_pa11cf", + "from": "system", + "setting_id": "a7kxY0dJGsGZn47w", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "filament_cost": [ + "124.99" + ], + "filament_density": [ + "1.11" + ], + "filament_max_volumetric_speed": [ + "6.5" + ], + "filament_spool_weight": [ + "197" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "PA11-CF" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "285" + ], + "nozzle_temperature_initial_layer": [ + "275" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S 0.6.json new file mode 100644 index 0000000000..167a3300a6 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S 0.6.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4S 0.6", + "inherits": "Prusament PA11 Carbon Fiber @MK4S", + "from": "system", + "setting_id": "FBlyfsI1Ma2iAPNK", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S 0.8.json new file mode 100644 index 0000000000..0689785966 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S 0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4S 0.8", + "inherits": "Prusament PA11 Carbon Fiber @MK4S", + "from": "system", + "setting_id": "0NFWsNglK5k71qTn", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "slow_down_layer_time": "18" +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.4.json new file mode 100644 index 0000000000..9e0ff77a60 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.4.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.4", + "inherits": "Prusament PA11 Carbon Fiber @MK4S", + "from": "system", + "setting_id": "aye0FxF8I7iBveqa", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp" + ], + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.5.json new file mode 100644 index 0000000000..7e1c46f294 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.5.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.5", + "inherits": "Prusament PA11 Carbon Fiber @MK4S", + "from": "system", + "setting_id": "dKNDJrwKoWYdTM5u", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.6.json new file mode 100644 index 0000000000..6eeed2e00c --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.6.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.6", + "inherits": "Prusament PA11 Carbon Fiber @MK4S", + "from": "system", + "setting_id": "CwGIOx1Nds9lAZ2V", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.8.json new file mode 100644 index 0000000000..deaf23f371 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S HF0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4S HF0.8", + "inherits": "Prusament PA11 Carbon Fiber @MK4S", + "from": "system", + "setting_id": "GXVNLqFRsWlDtQzZ", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "slow_down_layer_time": "20" +} diff --git a/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S.json b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S.json new file mode 100644 index 0000000000..39c52f2ae9 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PA11 Carbon Fiber @MK4S.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Prusament PA11 Carbon Fiber @MK4S", + "inherits": "fdm_filament_pa11cf", + "from": "system", + "setting_id": "bUXItT9R8S8cC0zq", + "filament_id": "OF4MZtnE", + "instantiation": "true", + "close_fan_the_first_x_layers": "4", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "fan_cooling_layer_time": "20", + "fan_max_speed": "12", + "fan_min_speed": "12", + "filament_cost": [ + "124.99" + ], + "filament_density": [ + "1.11" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "6.5" + ], + "filament_minimal_purge_on_wipe_tower": "35", + "filament_notes": [ + "" + ], + "filament_spool_weight": [ + "197" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "PA11-CF" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "90" + ], + "nozzle_temperature": [ + "285" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "overhang_fan_speed": "20", + "slow_down_layer_time": "10", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PC Blend @CORE One MMU3.json new file mode 100644 index 0000000000..ac1e31b8a5 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @CORE One MMU3", + "inherits": "Prusament PC Blend @CORE One", + "from": "system", + "setting_id": "VjMN8MwtU3BG5cA9", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "150" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK3S.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK3S.json new file mode 100644 index 0000000000..ee01d9be96 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK3S.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK3S", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "CXCOX0SxF2ayfzJq", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "filament_cost": [ + "51.53" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "PC" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4.json new file mode 100644 index 0000000000..dfd02df48b --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "ZGYW1dcpquZnrAvh", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "filament_cost": [ + "51.53" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "PC" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S 0.6.json new file mode 100644 index 0000000000..003ab80372 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S 0.6.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4S 0.6", + "inherits": "Prusament PC Blend @MK4S", + "from": "system", + "setting_id": "xDACbSXabUy8mLgz", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S 0.8.json new file mode 100644 index 0000000000..64f31dff07 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S 0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4S 0.8", + "inherits": "Prusament PC Blend @MK4S", + "from": "system", + "setting_id": "D9aLjfFHsSeQKmCN", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "slow_down_layer_time": "18" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.4.json new file mode 100644 index 0000000000..1fa33516f1 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.4.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4S HF0.4", + "inherits": "Prusament PC Blend @MK4S", + "from": "system", + "setting_id": "F9ojwwNwOFimrvA7", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp" + ], + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.5.json new file mode 100644 index 0000000000..3a6ca6f5b2 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.5.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4S HF0.5", + "inherits": "Prusament PC Blend @MK4S", + "from": "system", + "setting_id": "rnFCKXWalTbb1kCq", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.6.json new file mode 100644 index 0000000000..569fbb3be2 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.6.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4S HF0.6", + "inherits": "Prusament PC Blend @MK4S", + "from": "system", + "setting_id": "dCBGHyldKgJPtI58", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.8.json new file mode 100644 index 0000000000..b108d00335 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S HF0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4S HF0.8", + "inherits": "Prusament PC Blend @MK4S", + "from": "system", + "setting_id": "7gGAWA0q7ZbcUg9l", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "slow_down_layer_time": "20" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S.json b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S.json new file mode 100644 index 0000000000..28329e96e8 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend @MK4S.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Prusament PC Blend @MK4S", + "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "PnkaoPoBRavoeMJm", + "filament_id": "OFvDbkFq", + "instantiation": "true", + "close_fan_the_first_x_layers": "4", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "fan_cooling_layer_time": "20", + "fan_max_speed": "12", + "fan_min_speed": "12", + "filament_cost": [ + "51.53" + ], + "filament_density": [ + "1.22" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": "35", + "filament_notes": [ + "" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "PC" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "275" + ], + "nozzle_temperature_initial_layer": [ + "275" + ], + "overhang_fan_speed": "20", + "slow_down_layer_time": "10", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK3S.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK3S.json new file mode 100644 index 0000000000..623a3b40c4 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK3S.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK3S", + "inherits": "fdm_filament_pccf", + "from": "system", + "setting_id": "d9bHnNlPCrWYi9qR", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "filament_cost": [ + "74.99" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.02{else}0.04{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K12{elsif nozzle_diameter[0]==0.8};{else}M900 K20{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "PC-CF" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "285" + ], + "nozzle_temperature_initial_layer": [ + "285" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4.json new file mode 100644 index 0000000000..631adc3d61 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4.json @@ -0,0 +1,48 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4", + "inherits": "fdm_filament_pccf", + "from": "system", + "setting_id": "AmzsXSosYtRhIQ4G", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "filament_cost": [ + "74.99" + ], + "filament_density": [ + "1.22" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; Filament gcode\nM900 K{if nozzle_diameter[0]==0.4}0.03{elsif nozzle_diameter[0]==0.25}0.1{elsif nozzle_diameter[0]==0.3}0.06{elsif nozzle_diameter[0]==0.35}0.05{elsif nozzle_diameter[0]==0.5}0.03{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.012{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "PC-CF" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "285" + ], + "nozzle_temperature_initial_layer": [ + "285" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S 0.6.json new file mode 100644 index 0000000000..2a79f39297 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S 0.6.json @@ -0,0 +1,13 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4S 0.6", + "inherits": "Prusament PC Blend Carbon Fiber @MK4S", + "from": "system", + "setting_id": "cWC8gJcldfVtxPX6", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S 0.8.json new file mode 100644 index 0000000000..434c32c4da --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S 0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4S 0.8", + "inherits": "Prusament PC Blend Carbon Fiber @MK4S", + "from": "system", + "setting_id": "00MDpPdEKLFIKRaD", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "slow_down_layer_time": "18" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.4.json new file mode 100644 index 0000000000..804974ffbd --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.4.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.4", + "inherits": "Prusament PC Blend Carbon Fiber @MK4S", + "from": "system", + "setting_id": "KGuzaSeGZHauDImP", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.02{elsif nozzle_diameter[0]==0.5}0.018{elsif nozzle_diameter[0]==0.6}0.015{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.25}0.09{elsif nozzle_diameter[0]==0.3}0.065{else}0{endif} ; Filament gcode\nM142 S40 ; set heatbreak target temp" + ], + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.5.json new file mode 100644 index 0000000000..c726b71c77 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.5.json @@ -0,0 +1,12 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.5", + "inherits": "Prusament PC Blend Carbon Fiber @MK4S", + "from": "system", + "setting_id": "OaosyMTYopgexb4a", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.6.json new file mode 100644 index 0000000000..2f6ce1cfe4 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.6.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.6", + "inherits": "Prusament PC Blend Carbon Fiber @MK4S", + "from": "system", + "setting_id": "6Y8rtcvi7pHhZZWc", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.8.json new file mode 100644 index 0000000000..3d4752b6e4 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S HF0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4S HF0.8", + "inherits": "Prusament PC Blend Carbon Fiber @MK4S", + "from": "system", + "setting_id": "ZV1h1rvEia2iAtzD", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_max_speed": "15", + "fan_min_speed": "15", + "slow_down_layer_time": "20" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S.json b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S.json new file mode 100644 index 0000000000..2176620a50 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC Blend Carbon Fiber @MK4S.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Prusament PC Blend Carbon Fiber @MK4S", + "inherits": "fdm_filament_pccf", + "from": "system", + "setting_id": "hsgqC40IgFV1nBFs", + "filament_id": "OFdO6vpt", + "instantiation": "true", + "close_fan_the_first_x_layers": "4", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "fan_cooling_layer_time": "20", + "fan_max_speed": "12", + "fan_min_speed": "12", + "filament_cost": [ + "74.99" + ], + "filament_density": [ + "1.22" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_minimal_purge_on_wipe_tower": "35", + "filament_notes": [ + "" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.04{elsif nozzle_diameter[filament_extruder_id]==0.25}0.1{elsif nozzle_diameter[filament_extruder_id]==0.3}0.06{elsif nozzle_diameter[filament_extruder_id]==0.35}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.03{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.02{elsif nozzle_diameter[filament_extruder_id]==0.5}0.018{elsif nozzle_diameter[filament_extruder_id]==0.6}0.012{elsif nozzle_diameter[filament_extruder_id]==0.8}0.01{elsif nozzle_diameter[filament_extruder_id]==0.25}0.09{elsif nozzle_diameter[filament_extruder_id]==0.3}0.065{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S40 ; set heatbreak target temp" + ], + "filament_type": [ + "PC-CF" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "115" + ], + "hot_plate_temp_initial_layer": [ + "110" + ], + "nozzle_temperature": [ + "285" + ], + "nozzle_temperature_initial_layer": [ + "285" + ], + "overhang_fan_speed": "20", + "slow_down_layer_time": "10", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PC-CF @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PC-CF @CORE One MMU3.json new file mode 100644 index 0000000000..fc73ddf3b4 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PC-CF @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PC-CF @CORE One MMU3", + "inherits": "Prusament PC-CF @CORE One", + "from": "system", + "setting_id": "hTcuccoINAUJ4PfR", + "filament_id": "OFjz0a3m", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.6}0.025{elsif nozzle_diameter[filament_extruder_id]==0.8}0.016{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{else}0{endif} ; Filament gcode\n\nM142 S45 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "150" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PETG @CORE One MMU3.json new file mode 100644 index 0000000000..70d19cc0d1 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PETG @CORE One MMU3", + "inherits": "Prusament PETG @CORE One", + "from": "system", + "setting_id": "ypQNV38FrfRu9QSd", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "2.5" + ], + "filament_cooling_initial_speed": [ + "5" + ], + "filament_cooling_moves": [ + "3" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 42.4194 42.4194 42.4194 42.4194 42.4194| 0.05 42.4387 0.45 42.4387 0.95 42.4387 1.45 42.4387 1.95 42.4387 2.45 42.4387 2.95 42.4387 3.45 42.4387 3.95 42.4387 4.45 42.4387 4.95 42.4387" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "26.5" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "60" + ], + "filament_unloading_speed_start": [ + "60" + ], + "idle_temperature": [ + "130" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK3S.json b/resources/profiles/Prusa/filament/Prusament PETG @MK3S.json new file mode 100644 index 0000000000..20fe2653da --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK3S.json @@ -0,0 +1,78 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK3S", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "1Lq1vO0EjKGK7JnD", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.02{elsif nozzle_diameter[0]==0.6}0.04{else}0.08{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K24{elsif nozzle_diameter[0]==0.8};{else}M900 K45{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "85" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "230" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4.json new file mode 100644 index 0000000000..af10c5cfc9 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4.json @@ -0,0 +1,69 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "YB1aMpM57M1Wrhnw", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "fan_cooling_layer_time": [ + "30" + ], + "fan_max_speed": [ + "90" + ], + "fan_min_speed": [ + "40" + ], + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.27" + ], + "filament_flow_ratio": [ + "0.95" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_ramming_parameters": [ + "250 100 42.4 42.4 42.4 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.035{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.09{elsif nozzle_diameter[0]==0.35}0.08{elsif nozzle_diameter[0]==0.6}0.04{elsif nozzle_diameter[0]==0.5}0.05{elsif nozzle_diameter[0]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.055{elsif nozzle_diameter[0]==0.5}0.042{elsif nozzle_diameter[0]==0.6}0.025{elsif nozzle_diameter[0]==0.8}0.018{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "overhang_fan_speed": [ + "90" + ], + "overhang_fan_threshold": [ + "25%" + ], + "reduce_fan_stop_start_freq": [ + "1" + ], + "slow_down_for_layer_cooling": [ + "1" + ], + "slow_down_layer_time": [ + "8" + ], + "slow_down_min_speed": [ + "10" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4S 0.6.json new file mode 100644 index 0000000000..a2b467d4cb --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4S 0.6.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4S 0.6", + "inherits": "Prusament PETG @MK4S", + "from": "system", + "setting_id": "4IeTOEFPCTCEBwU1", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "filament_max_volumetric_speed": [ + "17" + ], + "overhang_fan_speed": "45", + "slow_down_layer_time": "10" +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4S 0.8.json new file mode 100644 index 0000000000..af75f27433 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4S 0.8.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4S 0.8", + "inherits": "Prusament PETG @MK4S", + "from": "system", + "setting_id": "bbyfFv8Lm1scbO48", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_max_speed": "45", + "fan_min_speed": "25", + "filament_max_volumetric_speed": [ + "22" + ], + "filament_retract_before_wipe": "50", + "nozzle_temperature": "245", + "nozzle_temperature_initial_layer": "240", + "overhang_fan_speed": "45", + "slow_down_layer_time": "18" +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.4.json new file mode 100644 index 0000000000..74303e85bd --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.4.json @@ -0,0 +1,23 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4S HF0.4", + "inherits": "Prusament PETG @MK4S", + "from": "system", + "setting_id": "PCkfLeCKekadlalX", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_max_volumetric_speed": [ + "24" + ], + "filament_ramming_parameters": [ + "250 100 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.5}0.044{elsif nozzle_diameter[0]==0.6}0.035{elsif nozzle_diameter[0]==0.8}0.022{elsif nozzle_diameter[0]==0.25}0.18{elsif nozzle_diameter[0]==0.3}0.1{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "nozzle_temperature": "245", + "nozzle_temperature_initial_layer": "235" +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.5.json new file mode 100644 index 0000000000..2ab13c26fb --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.5.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4S HF0.5", + "inherits": "Prusament PETG @MK4S", + "from": "system", + "setting_id": "HayDpO5Htl0tfaym", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ], + "filament_max_volumetric_speed": [ + "29" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.6.json new file mode 100644 index 0000000000..370f8a3a2e --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.6.json @@ -0,0 +1,20 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4S HF0.6", + "inherits": "Prusament PETG @MK4S", + "from": "system", + "setting_id": "WtNF07X5vNklj181", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "filament_max_volumetric_speed": [ + "33" + ], + "nozzle_temperature": "240", + "nozzle_temperature_initial_layer": "230", + "overhang_fan_speed": "45", + "slow_down_layer_time": "10" +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.8.json new file mode 100644 index 0000000000..d9ce144cd2 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4S HF0.8.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4S HF0.8", + "inherits": "Prusament PETG @MK4S", + "from": "system", + "setting_id": "wQHkNi9PUdQBELEy", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_max_speed": "45", + "filament_max_volumetric_speed": [ + "37" + ], + "filament_retract_before_wipe": "50", + "nozzle_temperature_initial_layer": "240", + "overhang_fan_speed": "45", + "slow_down_layer_time": "18" +} diff --git a/resources/profiles/Prusa/filament/Prusament PETG @MK4S.json b/resources/profiles/Prusa/filament/Prusament PETG @MK4S.json new file mode 100644 index 0000000000..9196845a27 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PETG @MK4S.json @@ -0,0 +1,60 @@ +{ + "type": "filament", + "name": "Prusament PETG @MK4S", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "J83RtTwoqDdTBPW2", + "filament_id": "OFkR8E2c", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "default_filament_colour": "#FF8000", + "fan_max_speed": "40", + "filament_cost": [ + "29.99" + ], + "filament_density": [ + "1.27" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_minimal_purge_on_wipe_tower": "35", + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "250 100 42.4 42.4 42.4 42.4 42.4 | 0.05 42.4 0.45 42.4 0.95 42.4 1.45 42.4 1.95 42.4 2.45 42.4 2.95 42.4 3.45 42.4 3.95 42.4 4.45 42.4 4.95 42.4" + ], + "filament_retract_before_wipe": "20", + "filament_retraction_length": "0.8", + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.07{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.09{elsif nozzle_diameter[filament_extruder_id]==0.35}0.08{elsif nozzle_diameter[filament_extruder_id]==0.6}0.04{elsif nozzle_diameter[filament_extruder_id]==0.5}0.05{elsif nozzle_diameter[filament_extruder_id]==0.8}0.02{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.053{elsif nozzle_diameter[filament_extruder_id]==0.5}0.042{elsif nozzle_diameter[filament_extruder_id]==0.6}0.032{elsif nozzle_diameter[filament_extruder_id]==0.8}0.018{elsif nozzle_diameter[filament_extruder_id]==0.25}0.18{elsif nozzle_diameter[filament_extruder_id]==0.3}0.1{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PETG" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "filament_wipe": "1", + "filament_z_hop": "0.15", + "full_fan_speed_layer": "5", + "hot_plate_temp": "90", + "hot_plate_temp_initial_layer": "85", + "nozzle_temperature": "240", + "nozzle_temperature_initial_layer": "230", + "overhang_fan_speed": "40", + "slow_down_layer_time": "7", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PLA @CORE One MMU3.json new file mode 100644 index 0000000000..df0112ed8f --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PLA @CORE One MMU3", + "inherits": "Prusament PLA @CORE One", + "from": "system", + "setting_id": "HSqoQhcjRqpny2g2", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK3S.json b/resources/profiles/Prusa/filament/Prusament PLA @MK3S.json new file mode 100644 index 0000000000..ccb4b54b63 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK3S.json @@ -0,0 +1,42 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK3S", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "jd5bJxkA2tV0xWMh", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "filament_cost": [ + "27.99" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4.json new file mode 100644 index 0000000000..7433816590 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4.json @@ -0,0 +1,45 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "NcoTSmHCXFp32Loh", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "filament_cost": [ + "27.99" + ], + "filament_density": [ + "1.24" + ], + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "12" + ], + "filament_ramming_parameters": [ + "250 100 40 40 40 40 40 | 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.026{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.026{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4S 0.6.json new file mode 100644 index 0000000000..7d85e6a598 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4S 0.6.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4S 0.6", + "inherits": "Prusament PLA @MK4S", + "from": "system", + "setting_id": "ZEBOwRtl5qpCb9IG", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "nozzle_temperature": "210", + "slow_down_layer_time": "10" +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4S 0.8.json new file mode 100644 index 0000000000..55fb31d409 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4S 0.8.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4S 0.8", + "inherits": "Prusament PLA @MK4S", + "from": "system", + "setting_id": "CzKCsSyqjLn2UfXr", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_min_speed": "80", + "filament_max_volumetric_speed": [ + "19" + ], + "nozzle_temperature": "225", + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.4.json new file mode 100644 index 0000000000..e1f7978ec4 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.4.json @@ -0,0 +1,22 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4S HF0.4", + "inherits": "Prusament PLA @MK4S", + "from": "system", + "setting_id": "LnduHI0DPjZ5GUrI", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_max_volumetric_speed": [ + "22" + ], + "filament_ramming_parameters": [ + "250 100 40 40| 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.026{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.015{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "nozzle_temperature": "225" +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.5.json new file mode 100644 index 0000000000..116642f6e6 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.5.json @@ -0,0 +1,17 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4S HF0.5", + "inherits": "Prusament PLA @MK4S", + "from": "system", + "setting_id": "3NoQEhv9aaqhuZkV", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ], + "fan_cooling_layer_time": "20", + "filament_max_volumetric_speed": [ + "24" + ], + "slow_down_layer_time": "8" +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.6.json new file mode 100644 index 0000000000..1553aad04f --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.6.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4S HF0.6", + "inherits": "Prusament PLA @MK4S", + "from": "system", + "setting_id": "gc7etYK4E5aNlE8r", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "filament_max_volumetric_speed": [ + "30" + ], + "slow_down_layer_time": "10", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.8.json new file mode 100644 index 0000000000..f971be6375 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4S HF0.8.json @@ -0,0 +1,19 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4S HF0.8", + "inherits": "Prusament PLA @MK4S", + "from": "system", + "setting_id": "7RNQ9AxcL9zZVpqX", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_min_speed": "80", + "filament_max_volumetric_speed": [ + "35" + ], + "slow_down_layer_time": "15", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PLA @MK4S.json b/resources/profiles/Prusa/filament/Prusament PLA @MK4S.json new file mode 100644 index 0000000000..24df5df2a6 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PLA @MK4S.json @@ -0,0 +1,52 @@ +{ + "type": "filament", + "name": "Prusament PLA @MK4S", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Zhgox3YIOqKlJpI7", + "filament_id": "OFnO4wnf", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "default_filament_colour": "#FF8000", + "fan_cooling_layer_time": "17", + "fan_min_speed": "70", + "filament_cost": [ + "27.99" + ], + "filament_density": [ + "1.24" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "250 100 40 40 40 40 40 | 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "full_fan_speed_layer": "3", + "nozzle_temperature_initial_layer": "230", + "slow_down_layer_time": "6", + "slow_down_min_speed": "20" +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament PVB @CORE One MMU3.json new file mode 100644 index 0000000000..992b9ebd58 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @CORE One MMU3.json @@ -0,0 +1,57 @@ +{ + "type": "filament", + "name": "Prusament PVB @CORE One MMU3", + "inherits": "Prusament PVB @CORE One", + "from": "system", + "setting_id": "IXUO4uCgUY1p5jIo", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_minimal_purge_on_wipe_tower": [ + "15" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK3S.json b/resources/profiles/Prusa/filament/Prusament PVB @MK3S.json new file mode 100644 index 0000000000..13a6aa761a --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK3S.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK3S", + "inherits": "fdm_filament_pvb", + "from": "system", + "setting_id": "kO3wM0M7J1PagKmj", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "filament_cost": [ + "49.98" + ], + "filament_density": [ + "1.09" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "PVB" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4.json new file mode 100644 index 0000000000..bce92b05ef --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4", + "inherits": "fdm_filament_pvb", + "from": "system", + "setting_id": "Ef8S7ZBjRdBICgMN", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "filament_cost": [ + "49.98" + ], + "filament_density": [ + "1.09" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_ramming_parameters": [ + "250 100 40 40 40 40 40 | 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.026{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.026{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PVB" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4S 0.6.json new file mode 100644 index 0000000000..10b24342b8 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4S 0.6.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4S 0.6", + "inherits": "Prusament PVB @MK4S", + "from": "system", + "setting_id": "d3jPKsT0pNyA81gj", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "slow_down_layer_time": "10" +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4S 0.8.json new file mode 100644 index 0000000000..9456ebc3c5 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4S 0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4S 0.8", + "inherits": "Prusament PVB @MK4S", + "from": "system", + "setting_id": "YHoqMYnFgw3tp4uV", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_min_speed": "80", + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.4.json new file mode 100644 index 0000000000..f18231e31c --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.4.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4S HF0.4", + "inherits": "Prusament PVB @MK4S", + "from": "system", + "setting_id": "Sds69fscdMiTlHlX", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_ramming_parameters": [ + "250 100 40 40| 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.026{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.015{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.5.json new file mode 100644 index 0000000000..843e9cc4b9 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.5.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4S HF0.5", + "inherits": "Prusament PVB @MK4S", + "from": "system", + "setting_id": "HRME1Zm3QWVNOM7D", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ], + "fan_cooling_layer_time": "20", + "slow_down_layer_time": "8" +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.6.json new file mode 100644 index 0000000000..4e88e536b3 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.6.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4S HF0.6", + "inherits": "Prusament PVB @MK4S", + "from": "system", + "setting_id": "dMKhLR5eOYhQusUg", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "slow_down_layer_time": "10", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.8.json new file mode 100644 index 0000000000..c91839dfbc --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4S HF0.8.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4S HF0.8", + "inherits": "Prusament PVB @MK4S", + "from": "system", + "setting_id": "E41yKP1EQp91Dhbm", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_min_speed": "80", + "slow_down_layer_time": "15", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament PVB @MK4S.json b/resources/profiles/Prusa/filament/Prusament PVB @MK4S.json new file mode 100644 index 0000000000..18e28e7418 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament PVB @MK4S.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Prusament PVB @MK4S", + "inherits": "fdm_filament_pvb", + "from": "system", + "setting_id": "eIhnQsQrrCKHjCIy", + "filament_id": "OFh7mvPO", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "fan_cooling_layer_time": "17", + "fan_min_speed": "70", + "filament_cost": [ + "49.98" + ], + "filament_density": [ + "1.09" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "250 100 40 40 40 40 40 | 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PVB" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "full_fan_speed_layer": "3", + "hot_plate_temp": [ + "75" + ], + "hot_plate_temp_initial_layer": [ + "75" + ], + "nozzle_temperature": [ + "215" + ], + "nozzle_temperature_initial_layer": [ + "215" + ], + "slow_down_layer_time": "6", + "slow_down_min_speed": "20" +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @CORE One MMU3.json b/resources/profiles/Prusa/filament/Prusament rPLA @CORE One MMU3.json new file mode 100644 index 0000000000..282449b194 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @CORE One MMU3.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament rPLA @CORE One MMU3", + "inherits": "Prusament rPLA @CORE One", + "from": "system", + "setting_id": "n0gSFPBaa7PQ1Y1x", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle", + "Prusa CORE One MMU3 0.25 nozzle", + "Prusa CORE One MMU3 0.3 nozzle", + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filament_cooling_final_speed": [ + "3.5" + ], + "filament_cooling_initial_speed": [ + "10" + ], + "filament_cooling_moves": [ + "2" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_loading_speed": [ + "10" + ], + "filament_loading_speed_start": [ + "50" + ], + "filament_ramming_parameters": [ + "250 100 40.1613 40.3548 40.4516 40.3548 40.2581| 0.05 40.1483 0.45 40.3419 0.95 40.3419 1.45 40.3419 1.95 40.3419 2.45 40.3419 2.95 40.3419 3.45 40.3419 3.95 40.3419 4.45 40.3419 4.95 40.3419" + ], + "filament_stamping_distance": [ + "45" + ], + "filament_stamping_loading_speed": [ + "29" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.022{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_unloading_speed": [ + "40" + ], + "filament_unloading_speed_start": [ + "30" + ], + "idle_temperature": [ + "170" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK3S.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK3S.json new file mode 100644 index 0000000000..26edf0dcd5 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK3S.json @@ -0,0 +1,51 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK3S", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "DvZ1JFdQmxSvwekh", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK3S 0.25 nozzle", + "Prusa MK3S 0.4 nozzle", + "Prusa MK3S 0.6 nozzle", + "Prusa MK3S 0.8 nozzle" + ], + "filament_cost": [ + "37.49" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.6}0.12{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/ and nozzle_diameter[0]==0.8}0.06{elsif printer_notes=~/.*PRINTER_MODEL_MINI.*/}0.2{elsif nozzle_diameter[0]==0.8}0.01{elsif nozzle_diameter[0]==0.6}0.04{else}0.05{endif} ; Filament gcode LA 1.5\n{if printer_notes=~/.*PRINTER_MODEL_MINI.*/};{elsif printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}M900 K200{elsif nozzle_diameter[0]==0.6}M900 K18{elsif nozzle_diameter[0]==0.8};{else}M900 K30{endif} ; Filament gcode LA 1.0" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4.json new file mode 100644 index 0000000000..f5a1e0a766 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4.json @@ -0,0 +1,54 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "SnMLCgJupdA5BURx", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4 0.25 nozzle", + "Prusa MK4 0.4 nozzle", + "Prusa MK4 0.6 nozzle", + "Prusa MK4 0.8 nozzle" + ], + "filament_cost": [ + "37.49" + ], + "filament_density": [ + "1.24" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_ramming_parameters": [ + "250 100 40 40 40 40 40 | 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.026{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_MK4IS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.026{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "slow_down_layer_time": [ + "8" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4S 0.6.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S 0.6.json new file mode 100644 index 0000000000..c973329486 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S 0.6.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4S 0.6", + "inherits": "Prusament rPLA @MK4S", + "from": "system", + "setting_id": "Jsb4d55uh5AiilFy", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "slow_down_layer_time": "10" +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4S 0.8.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S 0.8.json new file mode 100644 index 0000000000..7ed563d0ee --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S 0.8.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4S 0.8", + "inherits": "Prusament rPLA @MK4S", + "from": "system", + "setting_id": "ETHdABOm1ngNTAwE", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_min_speed": "80", + "slow_down_layer_time": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.4.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.4.json new file mode 100644 index 0000000000..118d9eeac3 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.4.json @@ -0,0 +1,18 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4S HF0.4", + "inherits": "Prusament rPLA @MK4S", + "from": "system", + "setting_id": "KqG308Vq6NlSFvBq", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.4 nozzle" + ], + "filament_ramming_parameters": [ + "250 100 40 40| 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_start_gcode": [ + "M572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.026{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.015{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n\nM142 S36 ; set heatbreak target temp" + ] +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.5.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.5.json new file mode 100644 index 0000000000..8cadd83f2a --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.5.json @@ -0,0 +1,14 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4S HF0.5", + "inherits": "Prusament rPLA @MK4S", + "from": "system", + "setting_id": "yWMgM2m6Vhmgcz3o", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.5 nozzle" + ], + "fan_cooling_layer_time": "20", + "slow_down_layer_time": "8" +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.6.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.6.json new file mode 100644 index 0000000000..cf1721197b --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.6.json @@ -0,0 +1,15 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4S HF0.6", + "inherits": "Prusament rPLA @MK4S", + "from": "system", + "setting_id": "rG5LhqOyuhtVsJA5", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.6 nozzle" + ], + "fan_cooling_layer_time": "22", + "slow_down_layer_time": "10", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.8.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.8.json new file mode 100644 index 0000000000..a0368f1f76 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S HF0.8.json @@ -0,0 +1,16 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4S HF0.8", + "inherits": "Prusament rPLA @MK4S", + "from": "system", + "setting_id": "4aW3ShLVlu345ILy", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S HF0.8 nozzle" + ], + "fan_cooling_layer_time": "25", + "fan_min_speed": "80", + "slow_down_layer_time": "15", + "slow_down_min_speed": "15" +} diff --git a/resources/profiles/Prusa/filament/Prusament rPLA @MK4S.json b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S.json new file mode 100644 index 0000000000..7ad6c20567 --- /dev/null +++ b/resources/profiles/Prusa/filament/Prusament rPLA @MK4S.json @@ -0,0 +1,62 @@ +{ + "type": "filament", + "name": "Prusament rPLA @MK4S", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "RT3cyjS4ZsddCiM9", + "filament_id": "OFWRITFw", + "instantiation": "true", + "compatible_printers": [ + "Prusa MK4S 0.25 nozzle", + "Prusa MK4S 0.3 nozzle", + "Prusa MK4S 0.4 nozzle", + "Prusa MK4S 0.5 nozzle" + ], + "fan_cooling_layer_time": "17", + "fan_min_speed": "70", + "filament_cost": [ + "37.49" + ], + "filament_density": [ + "1.24" + ], + "filament_end_gcode": [ + "; Filament-specific end gcode" + ], + "filament_max_volumetric_speed": [ + "10" + ], + "filament_notes": [ + "" + ], + "filament_ramming_parameters": [ + "250 100 40 40 40 40 40 | 0.05 40 0.45 40 0.95 40 1.45 40 1.95 40 2.45 40 2.95 40 3.45 40 3.95 40 4.45 40 4.95 40" + ], + "filament_spool_weight": [ + "278" + ], + "filament_start_gcode": [ + "M900 K{if nozzle_diameter[filament_extruder_id]==0.4}0.05{elsif nozzle_diameter[filament_extruder_id]==0.25}0.14{elsif nozzle_diameter[filament_extruder_id]==0.3}0.07{elsif nozzle_diameter[filament_extruder_id]==0.35}0.06{elsif nozzle_diameter[filament_extruder_id]==0.6}0.03{elsif nozzle_diameter[filament_extruder_id]==0.5}0.035{elsif nozzle_diameter[filament_extruder_id]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*(MK4IS|XLIS|MK4S|MK3.9S).*/}\nM572 S{if nozzle_diameter[filament_extruder_id]==0.4}0.036{elsif nozzle_diameter[filament_extruder_id]==0.5}0.025{elsif nozzle_diameter[filament_extruder_id]==0.6}0.02{elsif nozzle_diameter[filament_extruder_id]==0.8}0.014{elsif nozzle_diameter[filament_extruder_id]==0.25}0.12{elsif nozzle_diameter[filament_extruder_id]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp" + ], + "filament_type": [ + "PLA" + ], + "filament_vendor": [ + "Prusa Polymers" + ], + "full_fan_speed_layer": "3", + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "205" + ], + "nozzle_temperature_initial_layer": [ + "205" + ], + "slow_down_layer_time": "6", + "slow_down_min_speed": "20" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.25 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.25 nozzle.json new file mode 100644 index 0000000000..2a862a9a73 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.25 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.25 nozzle", + "inherits": "Prusa CORE One MMU3 0.4 nozzle", + "from": "system", + "setting_id": "8VtAsgGqtUUBmaxH", + "instantiation": "true", + "default_print_profile": "0.12mm SPEED @COREONE0.25 + MMU3", + "max_layer_height": "0.15", + "min_layer_height": "0.05", + "nozzle_diameter": [ + "0.25" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_variant": "0.25", + "retraction_length": "0.8", + "z_hop": "0.15" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.3 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.3 nozzle.json new file mode 100644 index 0000000000..3396a41a8d --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.3 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.3 nozzle", + "inherits": "Prusa CORE One MMU3 0.4 nozzle", + "from": "system", + "setting_id": "EiPXZjRoFcw95gWA", + "instantiation": "true", + "default_print_profile": "0.16mm STRUCTURAL @COREONE0.3 + MMU3", + "max_layer_height": "0.22", + "min_layer_height": "0.05", + "nozzle_diameter": [ + "0.3" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_variant": "0.3", + "retraction_length": "0.7", + "z_hop": "0.15" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.4 nozzle.json new file mode 100644 index 0000000000..83a6a95ca5 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.4 nozzle.json @@ -0,0 +1,40 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.4 nozzle", + "inherits": "Prusa CORE One 0.4 nozzle", + "from": "system", + "setting_id": "7NzvROXEkMpOMzJ5", + "instantiation": "true", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]", + "change_filament_gcode": "", + "cooling_tube_length": "20", + "cooling_tube_retraction": "45", + "default_filament_profile": "Prusament PLA @CORE One MMU3", + "default_print_profile": "0.20mm SPEED @COREONE0.4 + MMU3", + "extra_loading_move": "-52", + "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\n", + "machine_end_gcode": "{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nM140 S0 ; turn off heatbed\nM141 S0 ; disable chamber control\nM107 ; turn off fan\nG1 X242 Y211 F10200 ; park\n{if layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+50, max_print_height)} F720 ; Move bed down{endif}\nM702 ; unload the current filament\nM104 S0 ; turn off temperature\nG4 ; wait\nM572 S0 ; reset PA\nM84 X Y E ; disable motors\n; max_layer_z = [max_layer_z]", + "machine_load_filament_time": "10.9", + "machine_max_speed_z": [ + "12", + "40" + ], + "machine_start_gcode": "M17 ; enable steppers\nM862.1 P[nozzle_diameter] A{(printer_notes=~/.*ABRASIVE_NOZZLE.*/ ? 1 : 0)} F{(printer_notes=~/.*HF_NOZZLE.*/ ? 1 : 0)} ; nozzle check\nM862.3 P \"COREONE\" ; printer model check\nM862.5 P2 ; g-code level check\nM862.6 P \"Input shaper\" ; FW feature check\nM862.6 P \"MMU3\" ; FW feature check\nM115 U6.4.0+11974\n\n; setup MMU\nM708 A0x0b X5 ; extra load distance\nM708 A0x0d X140 ; unload feedrate\nM708 A0x11 X140 ; load feedrate\nM708 A0x14 X50 ; slow feedrate\nM708 A0x1e X12 ; Pulley current to ~200mA\nM708 A0x12 X90 ; selector feedrate mm/s\nM708 A0x13 X400 ; idler feedrate deg/s\nM708 A0x0f X400 ; selector acceleration mm/s2\n\nM555 X{(min(print_bed_max[0], first_layer_print_min[0] + 32) - 32)} Y{(max(0, first_layer_print_min[1]) - 4)} W{((min(print_bed_max[0], max(first_layer_print_min[0] + 32, first_layer_print_max[0])))) - ((min(print_bed_max[0], first_layer_print_min[0] + 32) - 32))} H{((first_layer_print_max[1])) - ((max(0, first_layer_print_min[1]) - 4))} ; define print area\n\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\n\n{if chamber_temperature[initial_tool] > 35} \n; we need to preheat the chamber\nM140 S115 ; set bed temp for chamber heating\n{else} \n; just set the selected bed temp otherwise\nM140 S[first_layer_bed_temperature] ; set bed temp\n{endif}\nM109 R{((filament_notes[initial_tool]=~/.*HT_MBL10.*/) ? (first_layer_temperature[initial_tool] - 10) : (filament_type[initial_tool] == \"PC\" or filament_type[initial_tool] == \"PA\") ? (first_layer_temperature[initial_tool] - 25) : (filament_type[initial_tool] == \"FLEX\") ? 210 : (filament_type[initial_tool]=~/.*PET.*/) ? 175 : 170)} ; wait for temp\n\nM84 E ; turn off E motor\n\nG28 ; home all without mesh bed level\n\n; -- Chamber Temperature Control --\n{if chamber_temperature[initial_tool] > 35} ; if we need to heat the chamber\n; min chamber temp section\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif} ; set idle temp\nG1 Z10 F720 ; set bed position\nG1 X242 Y-9 F4800 ; set print head position\nM191 S{chamber_temperature[initial_tool]} ; wait for minimal chamber temp\nM141 S0 ; set nominal chamber temp\nM107\nM140 S[first_layer_bed_temperature] ; set bed temp\n\n{else}\nM141 S{if chamber_temperature[initial_tool] == 0}20{else}{chamber_temperature[initial_tool]}{endif} ; set nominal chamber temp\n{endif}\n\n{if first_layer_bed_temperature[initial_tool]<=60}M106 S70{endif}\nG0 Z40 F10000\nM104 T{initial_tool} S{if idle_temperature[initial_tool] == 0}100{else}{idle_temperature[initial_tool]}{endif}\nM190 R[first_layer_bed_temperature] ; wait for bed temp\nM107\n\nG29 G ; absorb heat\n\nM109 R{((filament_notes[0]=~/.*HT_MBL10.*/) ? (first_layer_temperature[0] - 10) : (filament_type[0] == \"PC\" or filament_type[0] == \"PA\") ? (first_layer_temperature[0] - 25) : (filament_type[0] == \"FLEX\") ? 210 : 170)} ; wait for MBL temp\n\nM302 S160 ; lower cold extrusion limit to 160C\n\n{if filament_type[initial_tool]==\"FLEX\"}\nG1 E-4 F2400 ; retraction\n{else}\nG1 E-2 F2400 ; retraction\n{endif}\n\nM84 E ; turn off E motor\n\n; --- Mesh Bed Leveling (MBL) ---\n\nG29 P9 X208 Y-2.5 W32 H4 ; limited MBL\nM84 E ; turn off E motor\n\nG29 P1 ; invalidate MBL and probe print area\nG29 P1 X150 Y0 W100 H20 C ; probe near purge area\nG29 P3.2 ; MBL interpolation\nG29 P3.13 ; MBL extrapolation outside probe area\nG29 A ; activate MBL\n\n; prepare for purge\nM104 S{first_layer_temperature[initial_tool]}\nG0 X249 Y-2.5 Z15 F4800 ; move away and ready for the purge\nM109 S{first_layer_temperature[initial_tool]}\n\nG92 E0\nM569 S0 E ; set spreadcycle mode for extruder\n\nM591 S0 ; disable stuck detection\n\nT[initial_tool]\nG1 E{parking_pos_retraction + extra_loading_move - 15} F1000 ; load to the nozzle\n\n;\n; Extrude purge line\n;\nG92 E0 ; reset extruder position\nG1 E{(filament_type[initial_tool] == \"FLEX\" ? 4 : 2)} F2400 ; deretraction after the initial one before nozzle cleaning\nG0 E5 X235 Z0.2 F500 ; purge\nG0 X145 E36 F500 ; purge\nG0 X135 E4 F500 ; purge\nG0 X125 E4 F650 ; purge\nG0 X122 Z0.05 F8000 ; wipe, move close to the bed\nG0 X119 Z0.2 F8000 ; wipe, move quickly away from the bed\n\nM591 R ; restore stuck detection\n\nG92 E0\nM221 S100 ; set flow to 100%", + "machine_unload_filament_time": "8.9", + "nozzle_diameter": [ + "0.4" + ], + "nozzle_height": "4", + "parking_pos_retraction": "84", + "printer_extruder_id": [ + "1" + ], + "printer_extruder_variant": [ + "Direct Drive Standard" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_notes": "Don't remove the following keywords! These keywords are used in the \"compatible printer\" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_MODEL_COREONEMMU3\nPRINTER_MODEL_MK4\nCOREMMU\nRAMMING_EXTRA\nPG\nNO_TEMPLATES\nThe MK4 marker enables WipeTower2 cold ramming and filament monitoring control for the CORE One MMU3.", + "printer_variant": "0.4", + "single_extruder_multi_material": "1", + "wipe_tower_type": "type2" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.6 nozzle.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.6 nozzle.json new file mode 100644 index 0000000000..11de2e2eac --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3 0.6 nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "name": "Prusa CORE One MMU3 0.6 nozzle", + "inherits": "Prusa CORE One MMU3 0.4 nozzle", + "from": "system", + "setting_id": "rFDxiYXLDZVYHqe8", + "instantiation": "true", + "default_filament_profile": "Prusament PLA @CORE One MMU3", + "default_print_profile": "0.20mm SPEED @COREONE0.6 + MMU3", + "max_layer_height": "0.40", + "min_layer_height": "0.15", + "nozzle_diameter": [ + "0.6" + ], + "printer_model": "Prusa CORE One MMU3", + "printer_variant": "0.6", + "retraction_length": "0.7", + "wipe": "0" +} diff --git a/resources/profiles/Prusa/machine/Prusa CORE One MMU3.json b/resources/profiles/Prusa/machine/Prusa CORE One MMU3.json new file mode 100644 index 0000000000..a0e766e818 --- /dev/null +++ b/resources/profiles/Prusa/machine/Prusa CORE One MMU3.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "Prusa CORE One MMU3", + "bed_model": "coreone_bed.stl", + "bed_texture": "coreone.svg", + "default_materials": "Generic ABS @Prusa CORE One MMU3;Generic ASA @Prusa CORE One MMU3;Generic PETG @Prusa CORE One MMU3;Generic PLA @Prusa CORE One MMU3;Generic PLA Silk @Prusa CORE One MMU3;Generic TPU @Prusa CORE One MMU3", + "family": "Prusa", + "hotend_model": "", + "machine_tech": "FFF", + "model_id": "Prusa_CORE_One_MMU3", + "nozzle_diameter": "0.25;0.3;0.4;0.6" +} diff --git a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json index 18fe72ef3f..9890e6c88e 100644 --- a/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json +++ b/resources/profiles/Prusa/machine/Prusa MINIIS 0.4 nozzle.json @@ -96,6 +96,7 @@ "0.2" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "fan_speedup_time": "0.2", diff --git a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json index ae7df2e583..0c7c1de00f 100644 --- a/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json +++ b/resources/profiles/Prusa/machine/Prusa MK3.5 0.4 nozzle.json @@ -96,6 +96,7 @@ "0.2" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "fan_speedup_time": "0.2", diff --git a/resources/profiles/Prusa/machine/Prusa MK3S.json b/resources/profiles/Prusa/machine/Prusa MK3S.json index ad27bb59f6..6ebf5b6651 100644 --- a/resources/profiles/Prusa/machine/Prusa MK3S.json +++ b/resources/profiles/Prusa/machine/Prusa MK3S.json @@ -8,5 +8,5 @@ "bed_model": "mk3_bed.stl", "bed_texture": "mk3.svg", "hotend_model": "", - "default_materials": "Generic ABS @Prusa;Generic PLA @Prusa;Generic PLA-CF @Prusa;Generic PETG @Prusa;Generic TPU @Prusa;Generic ASA @Prusa;Generic PC @Prusa;Generic PVA @Prusa;Generic PA @Prusa;Generic PA-CF @Prusa" + "default_materials": "Generic ABS @Prusa;Generic PLA @Prusa;Generic PLA-CF @Prusa;Generic PETG @Prusa;Generic TPU @Prusa;Generic ASA @Prusa;Generic PC @Prusa;Generic PVA @Prusa;Generic PA @Prusa;Generic PA-CF @Prusa;Prusament PLA @MK3S;Prusament rPLA @MK3S;Prusament PETG @MK3S;Prusament ASA @MK3S;Prusament PC Blend @MK3S;Prusament PVB @MK3S;Prusament PC Blend Carbon Fiber @MK3S;Prusament PA11 Carbon Fiber @MK3S" } diff --git a/resources/profiles/Prusa/machine/Prusa MK4.json b/resources/profiles/Prusa/machine/Prusa MK4.json index a5a01b2f2e..912987092c 100644 --- a/resources/profiles/Prusa/machine/Prusa MK4.json +++ b/resources/profiles/Prusa/machine/Prusa MK4.json @@ -8,5 +8,5 @@ "bed_model": "mk4_bed.stl", "bed_texture": "mk4is.svg", "hotend_model": "", - "default_materials": "Generic PLA-CF @Prusa;Generic PC @Prusa;Generic PVA @Prusa;Generic PA @Prusa;Generic PA-CF @Prusa;Generic ABS @Prusa MK4;Generic PLA @Prusa MK4;Generic PETG @Prusa MK4;Generic TPU @Prusa MK4;Generic ASA @Prusa MK4;" + "default_materials": "Generic PLA-CF @Prusa;Generic PC @Prusa;Generic PVA @Prusa;Generic PA @Prusa;Generic PA-CF @Prusa;Generic ABS @Prusa MK4;Generic PLA @Prusa MK4;Generic PETG @Prusa MK4;Generic TPU @Prusa MK4;Generic ASA @Prusa MK4;Prusament PLA @MK4;Prusament rPLA @MK4;Prusament PETG @MK4;Prusament ASA @MK4;Prusament PC Blend @MK4;Prusament PVB @MK4;Prusament PC Blend Carbon Fiber @MK4;Prusament PA11 Carbon Fiber @MK4" } diff --git a/resources/profiles/Prusa/machine/Prusa MK4S.json b/resources/profiles/Prusa/machine/Prusa MK4S.json index e3f598023b..ae26c5aa27 100644 --- a/resources/profiles/Prusa/machine/Prusa MK4S.json +++ b/resources/profiles/Prusa/machine/Prusa MK4S.json @@ -3,7 +3,7 @@ "name": "Prusa MK4S", "bed_model": "mk4_bed.stl", "bed_texture": "mk4s.svg", - "default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S;Generic PLA @Prusa MK4S 0.6;Generic PLA @Prusa MK4S 0.8", + "default_materials": "Generic ABS @Prusa MK4S;Generic ASA @Prusa MK4S;Generic PETG @Prusa MK4S;Generic PLA @Prusa MK4S;Generic PLA Silk @Prusa MK4S;Generic TPU @Prusa MK4S;Generic PLA @Prusa MK4S 0.6;Generic PLA @Prusa MK4S 0.8;Prusament PLA @MK4S;Prusament rPLA @MK4S;Prusament PETG @MK4S;Prusament ASA @MK4S;Prusament PC Blend @MK4S;Prusament PVB @MK4S;Prusament PC Blend Carbon Fiber @MK4S;Prusament PA11 Carbon Fiber @MK4S", "family": "Prusa", "hotend_model": "", "machine_tech": "FFF", diff --git a/resources/profiles/Prusa/process/0.05mm DETAIL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.05mm DETAIL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..123a51ea99 --- /dev/null +++ b/resources/profiles/Prusa/process/0.05mm DETAIL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.05mm DETAIL @COREONE0.25 + MMU3", + "inherits": "0.05mm DETAIL @CORE One 0.25", + "from": "system", + "setting_id": "GZ9p7JXzPU3Widdg", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.07mm DETAIL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.07mm DETAIL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..97b0973c5c --- /dev/null +++ b/resources/profiles/Prusa/process/0.07mm DETAIL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.07mm DETAIL @COREONE0.25 + MMU3", + "inherits": "0.07mm DETAIL @CORE One 0.25", + "from": "system", + "setting_id": "9ffM9tc7XMSNHnGB", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..2e7b0c7edb --- /dev/null +++ b/resources/profiles/Prusa/process/0.10mm FAST DETAIL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.10mm FAST DETAIL @COREONE0.4 + MMU3", + "inherits": "0.10mm FAST DETAIL @CORE One 0.4", + "from": "system", + "setting_id": "5l28K1bE8lfuaXF1", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.12mm SPEED @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.12mm SPEED @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..e2d4ba94ca --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm SPEED @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12mm SPEED @COREONE0.25 + MMU3", + "inherits": "0.12mm SPEED @CORE One 0.25", + "from": "system", + "setting_id": "YjbMEvZ8ALzK2qHf", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..551f6248f5 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12mm STRUCTURAL @COREONE0.25 + MMU3", + "inherits": "0.12mm STRUCTURAL @CORE One 0.25", + "from": "system", + "setting_id": "g8Bp93DCAwTo5G0s", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..25efb09730 --- /dev/null +++ b/resources/profiles/Prusa/process/0.12mm STRUCTURAL @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12mm STRUCTURAL @COREONE0.3 + MMU3", + "inherits": "0.12mm STRUCTURAL @CORE One 0.3", + "from": "system", + "setting_id": "XmhM0qI0mXLbBMwv", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.15mm BALANCED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.15mm BALANCED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..dd86f29945 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm BALANCED @COREONE0.4 + MMU3.json @@ -0,0 +1,70 @@ +{ + "type": "process", + "name": "0.15mm BALANCED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "gU24xfFrPejGfV1D", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "45", + "bottom_shell_layers": "4", + "inner_wall_acceleration": "3000", + "inner_wall_speed": "150", + "internal_bridge_speed": "45", + "internal_solid_infill_acceleration": "6000", + "internal_solid_infill_speed": "150", + "layer_height": "0.15", + "outer_wall_acceleration": "2500", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "50", + "overhang_4_4_speed": "80%", + "small_perimeter_speed": "170", + "sparse_infill_acceleration": "5000", + "sparse_infill_speed": "150", + "support_bottom_z_distance": "0.17", + "support_interface_speed": "50", + "support_threshold_angle": "35", + "support_top_z_distance": "0.17", + "top_shell_layers": "6", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..287579505b --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm SPEED @COREONE0.25 + MMU3", + "inherits": "0.15mm SPEED @CORE One 0.25", + "from": "system", + "setting_id": "mYSeGZQ0MykDNtXP", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..d9b2e4b903 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm SPEED @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm SPEED @COREONE0.4 + MMU3", + "inherits": "0.15mm SPEED @CORE One 0.4", + "from": "system", + "setting_id": "CdehEFlvnacxhU2H", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json new file mode 100644 index 0000000000..b9082c332c --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.25 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm STRUCTURAL @COREONE0.25 + MMU3", + "inherits": "0.15mm STRUCTURAL @CORE One 0.25", + "from": "system", + "setting_id": "sUWaBUUy033BXEzk", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.25 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..dd1e847ee3 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm STRUCTURAL @COREONE0.4 + MMU3", + "inherits": "0.15mm STRUCTURAL @CORE One 0.4", + "from": "system", + "setting_id": "kM9rtB6iLqcDNZZU", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..6e7adf72c0 --- /dev/null +++ b/resources/profiles/Prusa/process/0.15mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.15mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.15mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "PTOVGYLNah28dKRr", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.16mm SPEED @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.16mm SPEED @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..30c6902ee7 --- /dev/null +++ b/resources/profiles/Prusa/process/0.16mm SPEED @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.16mm SPEED @COREONE0.3 + MMU3", + "inherits": "0.16mm SPEED @CORE One 0.3", + "from": "system", + "setting_id": "ByXT7JeCV0SWiSnt", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..946d22c3a5 --- /dev/null +++ b/resources/profiles/Prusa/process/0.16mm STRUCTURAL @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.16mm STRUCTURAL @COREONE0.3 + MMU3", + "inherits": "0.16mm STRUCTURAL @CORE One 0.3", + "from": "system", + "setting_id": "3XaKemYMM9AMLAIE", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.20mm BALANCED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm BALANCED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..eba4b17a0e --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm BALANCED @COREONE0.4 + MMU3.json @@ -0,0 +1,66 @@ +{ + "type": "process", + "name": "0.20mm BALANCED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "ZhSjwXMEOWyeWIDd", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "inner_wall_acceleration": "3000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "6000", + "internal_solid_infill_speed": "150", + "outer_wall_acceleration": "2500", + "overhang_2_4_speed": "25", + "overhang_3_4_speed": "50", + "overhang_4_4_speed": "80%", + "small_perimeter_speed": "170", + "sparse_infill_acceleration": "5000", + "sparse_infill_speed": "150", + "support_interface_speed": "60", + "support_style": "snug", + "support_threshold_angle": "35", + "top_shell_layers": "5", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..88860432a2 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SOLUBLE FULL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SOLUBLE FULL @COREONE0.4 + MMU3", + "inherits": "0.20mm SOLUBLE FULL @CORE One 0.4", + "from": "system", + "setting_id": "F4GvezeeqYGgETx5", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..c74ace1163 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SOLUBLE INTERFACE @COREONE0.4 + MMU3", + "inherits": "0.20mm SOLUBLE INTERFACE @CORE One 0.4", + "from": "system", + "setting_id": "hrh6ZS8cMrp6Fput", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..660170520b --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SPEED @COREONE0.3 + MMU3", + "inherits": "0.20mm SPEED @CORE One 0.3", + "from": "system", + "setting_id": "a8MnMQB4PuzlCBkv", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..66ac63af73 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SPEED @COREONE0.4 + MMU3", + "inherits": "0.20mm SPEED @CORE One 0.4", + "from": "system", + "setting_id": "gFegVTUTnp12IurN", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..fa6fcb0a90 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm SPEED @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm SPEED @COREONE0.6 + MMU3", + "inherits": "0.20mm SPEED @CORE One 0.6", + "from": "system", + "setting_id": "b5DuLDBbPOrc3QUB", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json new file mode 100644 index 0000000000..d1fe101fb0 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.3 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm STRUCTURAL @COREONE0.3 + MMU3", + "inherits": "0.20mm STRUCTURAL @CORE One 0.3", + "from": "system", + "setting_id": "3GXAe0t8hNMloSsA", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.3 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..cdb41c0ac6 --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.4 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm STRUCTURAL @COREONE0.4 + MMU3", + "inherits": "0.20mm STRUCTURAL @CORE One 0.4", + "from": "system", + "setting_id": "elSJkPZlFi4sWveY", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..1a5cad323a --- /dev/null +++ b/resources/profiles/Prusa/process/0.20mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.20mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "uvQ25wBWKEFdqMVl", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.25mm BALANCED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.25mm BALANCED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..4a3343351a --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm BALANCED @COREONE0.4 + MMU3.json @@ -0,0 +1,68 @@ +{ + "type": "process", + "name": "0.25mm BALANCED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "cEccdq6KND9xa5HS", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "inner_wall_acceleration": "3000", + "inner_wall_speed": "150", + "internal_solid_infill_acceleration": "5000", + "internal_solid_infill_speed": "140", + "layer_height": "0.25", + "outer_wall_acceleration": "2500", + "overhang_2_4_speed": "15", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "70%", + "small_perimeter_speed": "150", + "sparse_infill_acceleration": "5000", + "sparse_infill_speed": "150", + "support_base_pattern": "rectilinear", + "support_bottom_z_distance": "0.25", + "support_style": "snug", + "support_threshold_angle": "35", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..869de56781 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.4 + MMU3.json @@ -0,0 +1,65 @@ +{ + "type": "process", + "name": "0.25mm SPEED @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "oVLlJtwPINArAb0Y", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "inner_wall_acceleration": "6000", + "internal_solid_infill_acceleration": "5000", + "layer_height": "0.25", + "overhang_2_4_speed": "15", + "overhang_3_4_speed": "25", + "overhang_4_4_speed": "70%", + "small_perimeter_speed": "170", + "sparse_infill_acceleration": "7000", + "support_base_pattern": "rectilinear", + "support_bottom_z_distance": "0.25", + "support_interface_speed": "60", + "support_style": "snug", + "support_threshold_angle": "35", + "support_top_z_distance": "0.25", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..ebfaa5bad5 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm SPEED @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.25mm SPEED @COREONE0.6 + MMU3", + "inherits": "0.25mm SPEED @CORE One 0.6", + "from": "system", + "setting_id": "CRAV58WCDIn2bZdK", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json new file mode 100644 index 0000000000..87aa0f0c52 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.4 + MMU3.json @@ -0,0 +1,72 @@ +{ + "type": "process", + "name": "0.25mm STRUCTURAL @COREONE0.4 + MMU3", + "inherits": "0.20mm Standard @MK4", + "from": "system", + "setting_id": "lBGry26X4a9IihAD", + "instantiation": "true", + "bridge_acceleration": "1500", + "brim_type": "no_brim", + "default_acceleration": "3000", + "elefant_foot_compensation": "0.2", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "initial_layer_acceleration": "500", + "initial_layer_infill_speed": "100", + "initial_layer_line_width": "0.5", + "inner_wall_line_width": "0.45", + "internal_solid_infill_line_width": "0.45", + "line_width": "0.45", + "outer_wall_line_width": "0.45", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "raft_first_layer_expansion": "3", + "resolution": "0", + "seam_gap": "15%", + "sparse_infill_line_width": "0.45", + "sparse_infill_pattern": "grid", + "support_base_pattern_spacing": "2", + "support_bottom_interface_spacing": "0.2", + "support_interface_bottom_layers": "0", + "support_interface_spacing": "0.2", + "support_interface_top_layers": "3", + "support_line_width": "0.4", + "support_speed": "120", + "top_surface_acceleration": "2000", + "top_surface_line_width": "0.42", + "travel_acceleration": "7000", + "travel_speed": "350", + "wall_loops": "2", + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "bridge_speed": "50", + "gap_infill_speed": "60", + "inner_wall_acceleration": "2500", + "inner_wall_speed": "70", + "internal_solid_infill_acceleration": "4000", + "internal_solid_infill_speed": "140", + "layer_height": "0.25", + "outer_wall_acceleration": "1500", + "outer_wall_speed": "50", + "overhang_1_4_speed": "50%", + "overhang_2_4_speed": "15", + "overhang_3_4_speed": "45", + "overhang_4_4_speed": "90%", + "small_perimeter_speed": "50", + "sparse_infill_acceleration": "6000", + "sparse_infill_speed": "120", + "support_base_pattern": "rectilinear", + "support_bottom_z_distance": "0.25", + "support_style": "snug", + "support_threshold_angle": "40", + "support_top_z_distance": "0.25", + "top_surface_speed": "80", + "compatible_printers": [ + "Prusa CORE One MMU3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..3ade06d990 --- /dev/null +++ b/resources/profiles/Prusa/process/0.25mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.25mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.25mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "95m4AA4YRwcBt63r", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Prusa/process/0.32mm SPEED @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.32mm SPEED @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..1f39814702 --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm SPEED @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.32mm SPEED @COREONE0.6 + MMU3", + "inherits": "0.32mm SPEED @CORE One 0.6", + "from": "system", + "setting_id": "nqrmLvULVOKW9bSm", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%", + "compatible_printers_condition": "" +} diff --git a/resources/profiles/Prusa/process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json new file mode 100644 index 0000000000..8d69f5c4bc --- /dev/null +++ b/resources/profiles/Prusa/process/0.32mm STRUCTURAL @COREONE0.6 + MMU3.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.32mm STRUCTURAL @COREONE0.6 + MMU3", + "inherits": "0.32mm STRUCTURAL @CORE One 0.6", + "from": "system", + "setting_id": "rYhCYIq1vvY40IYf", + "instantiation": "true", + "compatible_printers": [ + "Prusa CORE One MMU3 0.6 nozzle" + ], + "compatible_printers_condition": "", + "filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[0]}-{filament_type[1]}-{filament_type[2]}-{filament_type[3]}-{filament_type[4]}_COREONE_MMU3_{print_time}.gcode", + "prime_tower_brim_width": "2", + "print_extruder_id": [ + "1" + ], + "print_extruder_variant": [ + "Direct Drive Standard" + ], + "wipe_tower_cone_angle": "25", + "wipe_tower_extra_flow": "250%", + "wipe_tower_extra_spacing": "110%" +} diff --git a/resources/profiles/Qidi.json b/resources/profiles/Qidi.json index 25ffa10171..4b6496df31 100644 --- a/resources/profiles/Qidi.json +++ b/resources/profiles/Qidi.json @@ -1,6 +1,6 @@ { "name": "Qidi", - "version": "02.04.00.14", + "version": "02.04.00.16", "force_update": "0", "description": "Qidi configurations", "machine_model_list": [ diff --git a/resources/profiles/Qidi/Qidi X-Plus 5_cover.png b/resources/profiles/Qidi/Qidi X-Plus 5_cover.png index 06f5c5858d..632a2ce841 100644 Binary files a/resources/profiles/Qidi/Qidi X-Plus 5_cover.png and b/resources/profiles/Qidi/Qidi X-Plus 5_cover.png differ diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.2 nozzle.json index 2ca51212e7..b9a712df46 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi Q1 Pro 0.2 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi Q1 Pro 0.2 nozzle;Qidi Generic ABS Qidi Q1 Pro 0.2 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "IQDYfIQsv6WlnA3z", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json index 7c22168a8e..9f67b4ed0c 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi Q1 Pro 0.4 nozzle;Qidi Generic ABS Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "YS0ov4dEWAJhRRvk", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.6 nozzle.json index b16d7783b2..ed830abf62 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi Q1 Pro 0.6 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi Q1 Pro 0.6 nozzle;Qidi Generic ABS Qidi Q1 Pro 0.6 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "LQTfTgV2MBEm6DDD", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.8 nozzle.json index 61f33e870a..fcc954bd1d 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi Q1 Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi Q1 Pro 0.8 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi Q1 Pro 0.8 nozzle;Qidi Generic ABS Qidi Q1 Pro 0.8 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "ZWOlrWQQwvsDV8xa", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Max 3 0.2 nozzle.json index fcb9b9f547..5b8101c544 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Max 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi X-Max 3 0.2 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi X-Max 3 0.2 nozzle;Qidi Generic ABS Qidi X-Max 3 0.2 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "v7w2dLJ1MtUjvy1l", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 3 0.2 nozzle.json index c52716ea4b..7d82df3dfe 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi X-Plus 3 0.2 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi X-Plus 3 0.2 nozzle;Qidi Generic ABS Qidi X-Plus 3 0.2 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "vH2jlch11zfDBUPP", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json index 521521c0fe..d6608ea9c7 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi X-Plus 4 0.2 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi X-Plus 4 0.2 nozzle;Qidi Generic ABS Qidi X-Plus 4 0.2 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "0bwmAx9OQYm5MwVE", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json index b5bbbdbf47..ce1d6d1031 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi X-Plus 4 0.4 nozzle;Qidi Generic ABS Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "Y3yAythmKXxr76Pg", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json index 27ef9809e8..2d220fae24 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi X-Plus 4 0.6 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi X-Plus 4 0.6 nozzle;Qidi Generic ABS Qidi X-Plus 4 0.6 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "Bt8ySpZn6WFWC00A", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json index 3dcc3d5889..5f70d001c9 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi X-Plus 4 0.8 nozzle;Qidi Generic ABS Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "7j3bweJutseUaoZQ", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Smart 3 0.2 nozzle.json index 7503ba737d..abb68163d7 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi X-Smart 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi X-Smart 3 0.2 nozzle", - "inherits": "Generic ABS @Qidi", "renamed_from": "Qidi Generic ABS @Qidi X-Smart 3 0.2 nozzle;Qidi Generic ABS Qidi X-Smart 3 0.2 nozzle", + "inherits": "Generic ABS @Qidi", "from": "system", "setting_id": "StJpaMQKORYm7i94", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ABS @Qidi.json b/resources/profiles/Qidi/filament/Generic ABS @Qidi.json index 76a01a3fa6..94bff391e1 100644 --- a/resources/profiles/Qidi/filament/Generic ABS @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic ABS @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Qidi", - "inherits": "fdm_filament_abs", "renamed_from": "Qidi Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "iO5utPsBKAo7cHop", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.2 nozzle.json index 749dddc689..131ed3d9bc 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi Q1 Pro 0.2 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi Q1 Pro 0.2 nozzle;Qidi Generic ASA Qidi Q1 Pro 0.2 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "3LUibDTlv799Gy6r", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.4 nozzle.json index f8ef61a4aa..40aa8e0cce 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi Q1 Pro 0.4 nozzle;Qidi Generic ASA Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "EtjXhHzpmShNgIqj", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.6 nozzle.json index cef5172ed5..042d20b807 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi Q1 Pro 0.6 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi Q1 Pro 0.6 nozzle;Qidi Generic ASA Qidi Q1 Pro 0.6 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "5hlUjx0YAFTR9TYr", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.8 nozzle.json index 93b389d444..beaa056c27 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi Q1 Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi Q1 Pro 0.8 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi Q1 Pro 0.8 nozzle;Qidi Generic ASA Qidi Q1 Pro 0.8 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "oArSgOFOlXLGkueW", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Max 3 0.2 nozzle.json index 38b0088adb..61b4f99d0b 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Max 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi X-Max 3 0.2 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi X-Max 3 0.2 nozzle;Qidi Generic ASA Qidi X-Max 3 0.2 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "LfT1OaNir4KZevUP", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 3 0.2 nozzle.json index c0e92e8f7c..e324f211d0 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi X-Plus 3 0.2 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi X-Plus 3 0.2 nozzle;Qidi Generic ASA Qidi X-Plus 3 0.2 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "S2aFIcoyiIsZ5TR8", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json index 1f7ec6918c..8a7eef5c24 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi X-Plus 4 0.2 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi X-Plus 4 0.2 nozzle;Qidi Generic ASA Qidi X-Plus 4 0.2 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "aYowi3jA3nUcr5e8", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json index 1a42a6d075..2c40f2f68c 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi X-Plus 4 0.4 nozzle;Qidi Generic ASA Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "Qaogxqa5Zw7i7n0a", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json index 6700a02c94..9f071cebf6 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi X-Plus 4 0.6 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi X-Plus 4 0.6 nozzle;Qidi Generic ASA Qidi X-Plus 4 0.6 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "aP2WrJLkjpGFtt8I", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json index 3a1c923505..a7f079c5b9 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi X-Plus 4 0.8 nozzle;Qidi Generic ASA Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "mx6C1Q73i0B7gpag", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Smart 3 0.2 nozzle.json index 437ed6c7d8..45110363c3 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi X-Smart 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi X-Smart 3 0.2 nozzle", - "inherits": "Generic ASA @Qidi", "renamed_from": "Qidi Generic ASA @Qidi X-Smart 3 0.2 nozzle;Qidi Generic ASA Qidi X-Smart 3 0.2 nozzle", + "inherits": "Generic ASA @Qidi", "from": "system", "setting_id": "6jbwOYmS2ypqTshH", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic ASA @Qidi.json b/resources/profiles/Qidi/filament/Generic ASA @Qidi.json index 6057fbea4a..0e3f924506 100644 --- a/resources/profiles/Qidi/filament/Generic ASA @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic ASA @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Qidi", - "inherits": "fdm_filament_asa", "renamed_from": "Qidi Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "IO7E03K3t2sySCAM", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Qidi/filament/Generic PA @Qidi.json b/resources/profiles/Qidi/filament/Generic PA @Qidi.json index c27771e405..6f56a24db4 100644 --- a/resources/profiles/Qidi/filament/Generic PA @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PA @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Qidi", - "inherits": "fdm_filament_pa", "renamed_from": "Qidi Generic PA", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "la9e4F5ns9eWv7Lg", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json b/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json index bdf39e1630..fa2710c578 100644 --- a/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PA-CF @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Qidi", - "inherits": "fdm_filament_pa", "renamed_from": "Qidi Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "qLuGt33iENH6QTjv", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi 0.2 nozzle.json index 8573598189..ee2ff50daf 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi 0.2 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @0.2 nozzle;Qidi Generic PC 0.2 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "Ei2Izb38mh4A4wgw", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi 0.8 nozzle.json index 491f5917d3..ff71dffad4 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi 0.8 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @0.8 nozzle;Qidi Generic PC 0.8 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "marM5nqtpl08NP9b", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.2 nozzle.json index fb85345598..ad21c9206a 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi Q1 Pro 0.2 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi Q1 Pro 0.2 nozzle;Qidi Generic PC Qidi Q1 Pro 0.2 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "5sAcMTaVI41PCs3n", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.4 nozzle.json index b7057b6c2f..d635aa6da6 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi Q1 Pro 0.4 nozzle;Qidi Generic PC Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "QmaeYzkbcmKJCJSv", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.6 nozzle.json index 56a5a8e132..e774dac351 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi Q1 Pro 0.6 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi Q1 Pro 0.6 nozzle;Qidi Generic PC Qidi Q1 Pro 0.6 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "heIlhCMIZ9MXeDHE", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.8 nozzle.json index 13f13ea759..f9f3fa7cef 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi Q1 Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi Q1 Pro 0.8 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi Q1 Pro 0.8 nozzle;Qidi Generic PC Qidi Q1 Pro 0.8 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "JlztE3hk1LB23o4h", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.2 nozzle.json index 29c7c1658b..b1ff25edbd 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi X-Plus 4 0.2 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PC Qidi X-Plus 4 0.2 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "2eI2cXfCN6vlk6UV", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.4 nozzle.json index ba52effd22..c8427080e2 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PC Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "kGhUT0TAXku3by9D", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.6 nozzle.json index e3f9c180ba..78afa33a2e 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi X-Plus 4 0.6 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PC Qidi X-Plus 4 0.6 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "HzAwEYvedOi3GRMY", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.8 nozzle.json index e6c8d1586d..c85b2b7230 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic PC @Qidi", "renamed_from": "Qidi Generic PC @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PC Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic PC @Qidi", "from": "system", "setting_id": "iq1u1nPMi9GT31p9", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PC @Qidi.json b/resources/profiles/Qidi/filament/Generic PC @Qidi.json index c69f050f5c..574c75e189 100644 --- a/resources/profiles/Qidi/filament/Generic PC @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PC @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Qidi", - "inherits": "fdm_filament_pc", "renamed_from": "Qidi Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "m1fBauBqqvKdIAAr", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.2 nozzle.json index 02004cab28..a2ea56a059 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi Q1 Pro 0.2 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi Q1 Pro 0.2 nozzle;Qidi Generic PETG Qidi Q1 Pro 0.2 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "D2QwO7VczuscejBF", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json index 10a2b2f080..b8e5e3ed9f 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi Q1 Pro 0.4 nozzle;Qidi Generic PETG Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "GeV4szn47hD1UedT", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.6 nozzle.json index 995b79eb68..c739178dfd 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi Q1 Pro 0.6 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi Q1 Pro 0.6 nozzle;Qidi Generic PETG Qidi Q1 Pro 0.6 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "hwVzOmBJL0wnhzVj", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.8 nozzle.json index f1d1298d8d..ebc69da5df 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi Q1 Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi Q1 Pro 0.8 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi Q1 Pro 0.8 nozzle;Qidi Generic PETG Qidi Q1 Pro 0.8 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "QKyHd7rHutldls1y", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Max 3 0.2 nozzle.json index 9eb15c7a9c..c4728dd56b 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Max 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi X-Max 3 0.2 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi X-Max 3 0.2 nozzle;Qidi Generic PETG Qidi X-Max 3 0.2 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "afJiGzHpK1vEgb0S", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 3 0.2 nozzle.json index 7994ab710f..fcce9fc73a 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi X-Plus 3 0.2 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi X-Plus 3 0.2 nozzle;Qidi Generic PETG Qidi X-Plus 3 0.2 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "grlFOKGDoAo075zz", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json index f8de246245..e545d2e6f5 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi X-Plus 4 0.2 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PETG Qidi X-Plus 4 0.2 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "hb1v0ytZ8KFm0KeO", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json index 0419f9669d..7d13f3211b 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PETG Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "V8YvTFXnlItPw97m", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json index f4a3448c63..40fcfa53e8 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi X-Plus 4 0.6 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PETG Qidi X-Plus 4 0.6 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "X9FiUfQBLABTKIKO", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json index 6bc15f85a2..2381fdb58c 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PETG Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "5XdW6h65aMPX61o9", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Smart 3 0.2 nozzle.json index ac5c820791..c08df1141a 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi X-Smart 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi X-Smart 3 0.2 nozzle", - "inherits": "Generic PETG @Qidi", "renamed_from": "Qidi Generic PETG @Qidi X-Smart 3 0.2 nozzle;Qidi Generic PETG Qidi X-Smart 3 0.2 nozzle", + "inherits": "Generic PETG @Qidi", "from": "system", "setting_id": "MynfKhfKlXwFaVOJ", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG @Qidi.json b/resources/profiles/Qidi/filament/Generic PETG @Qidi.json index b4747dc9df..94b2ec8002 100644 --- a/resources/profiles/Qidi/filament/Generic PETG @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PETG @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Qidi", - "inherits": "fdm_filament_pet", "renamed_from": "Qidi Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "zRfo4sbJ3auEJtiC", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json b/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json index fbe5386405..d99e3af12b 100644 --- a/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PETG-CF @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Qidi", - "inherits": "fdm_filament_pet", "renamed_from": "Qidi Generic PETG-CF", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "1ehKRzcekplfoFdJ", "filament_id": "OFoYSJKi", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json index 4c0c00e6ba..86c04e8e84 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi Q1 Pro 0.2 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi Q1 Pro 0.2 nozzle;Qidi Generic PLA Qidi Q1 Pro 0.2 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "2TNFziuyxg2X4zgY", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.4 nozzle.json index 5b49e8560e..b8f25d0170 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi Q1 Pro 0.4 nozzle;Qidi Generic PLA Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "PNCPMC8uMY9h5SZr", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json index 442f46e559..ef0c9e0b58 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi Q1 Pro 0.6 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi Q1 Pro 0.6 nozzle;Qidi Generic PLA Qidi Q1 Pro 0.6 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "23t94qXoDPSdi7fS", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json index d915ed03a8..04e92b79fd 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi Q1 Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi Q1 Pro 0.8 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi Q1 Pro 0.8 nozzle;Qidi Generic PLA Qidi Q1 Pro 0.8 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "aWIicFWyadhnYKfF", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.2 nozzle.json index 52ee24c470..619675bfa9 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Max 3 0.2 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Max 3 0.2 nozzle;Qidi Generic PLA Qidi X-Max 3 0.2 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "VhP4JYzAah2X1Kr3", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.6 nozzle.json index 76521556dd..7da0c07712 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Max 3 0.6 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Max 3 0.6 nozzle;Qidi Generic PLA Qidi X-Max 3 0.6 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "uhzFvazl2rWd0YN3", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.8 nozzle.json index 4246b7fc19..3a054b001a 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Max 3 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Max 3 0.8 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Max 3 0.8 nozzle;Qidi Generic PLA Qidi X-Max 3 0.8 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "t7bkbAgWCK7ObiK4", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.2 nozzle.json index 7508b21dc3..c2c3235b9d 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Plus 3 0.2 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Plus 3 0.2 nozzle;Qidi Generic PLA Qidi X-Plus 3 0.2 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "1iUDRQmhNsb4Tlag", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.6 nozzle.json index fcdcb48de7..ecad4ab984 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Plus 3 0.6 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Plus 3 0.6 nozzle;Qidi Generic PLA Qidi X-Plus 3 0.6 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "qbT3T9cRjqK7aO4M", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.8 nozzle.json index d42c838771..9fea437ebe 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 3 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Plus 3 0.8 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Plus 3 0.8 nozzle;Qidi Generic PLA Qidi X-Plus 3 0.8 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "dMVLTDJInWMo2fMP", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json index 8124fb26b0..8aeb08e0d0 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Plus 4 0.2 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PLA Qidi X-Plus 4 0.2 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "4OyCs9habQtGhoot", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json index 90d822953f..60aef44069 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "SU5XqpfPO5g87dfL", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json index 2cc9b574c1..77199ca160 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Plus 4 0.6 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PLA Qidi X-Plus 4 0.6 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "7ALKguzkoK6KLHVv", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json index 2f0ab0b4c7..3b54f66229 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PLA Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "jzfMNZP4WaNcNixD", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.2 nozzle.json index c9af562ff6..0947ec5a64 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Smart 3 0.2 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Smart 3 0.2 nozzle;Qidi Generic PLA Qidi X-Smart 3 0.2 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "gNbvzCkxedrQ7nQe", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.6 nozzle.json index 497283dd4c..b4c5017daf 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Smart 3 0.6 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Smart 3 0.6 nozzle;Qidi Generic PLA Qidi X-Smart 3 0.6 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "t8uPl9peXZRJbdLj", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.8 nozzle.json index 6b125ee3aa..1139e581ec 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi X-Smart 3 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi X-Smart 3 0.8 nozzle", - "inherits": "Generic PLA @Qidi", "renamed_from": "Qidi Generic PLA @Qidi X-Smart 3 0.8 nozzle;Qidi Generic PLA Qidi X-Smart 3 0.8 nozzle", + "inherits": "Generic PLA @Qidi", "from": "system", "setting_id": "VsoBEmU35N8eW3CO", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA @Qidi.json b/resources/profiles/Qidi/filament/Generic PLA @Qidi.json index e3e1f6eb48..c49b7ada5c 100644 --- a/resources/profiles/Qidi/filament/Generic PLA @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PLA @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Qidi", - "inherits": "fdm_filament_pla", "renamed_from": "Qidi Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "illxClFj0LphvnHh", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.2 nozzle.json index 75f9a19364..75bb815bb9 100644 --- a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Qidi X-Plus 4 0.2 nozzle", - "inherits": "Generic PLA @Qidi X-Plus 4 0.2 nozzle", "renamed_from": "Qidi Generic PLA High Speed @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PLA High Speed Qidi X-Plus 4 0.2 nozzle", + "inherits": "Generic PLA @Qidi X-Plus 4 0.2 nozzle", "from": "system", "setting_id": "ktWvoEzkA0mJ0Q5T", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.4 nozzle.json index 7067954ef5..ff45958f89 100644 --- a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic PLA @Qidi X-Plus 4 0.4 nozzle", "renamed_from": "Qidi Generic PLA High Speed @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA High Speed Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic PLA @Qidi X-Plus 4 0.4 nozzle", "from": "system", "setting_id": "lBa0yfqPsQgr4U3m", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.6 nozzle.json index d4bd50b020..aea3f32b82 100644 --- a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Qidi X-Plus 4 0.6 nozzle", - "inherits": "Generic PLA @Qidi X-Plus 4 0.6 nozzle", "renamed_from": "Qidi Generic PLA High Speed @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PLA High Speed Qidi X-Plus 4 0.6 nozzle", + "inherits": "Generic PLA @Qidi X-Plus 4 0.6 nozzle", "from": "system", "setting_id": "Ls5CQx5Yf8QuC4T3", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle.json index dd77278778..e290cff0c9 100644 --- a/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic PLA @Qidi X-Plus 4 0.8 nozzle", "renamed_from": "Qidi Generic PLA High Speed @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PLA High Speed Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic PLA @Qidi X-Plus 4 0.8 nozzle", "from": "system", "setting_id": "VyCsuptxJnVw1KqD", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json index fbf48ad575..365da21bae 100644 --- a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic PLA Silk @Qidi", "renamed_from": "Qidi Generic PLA Silk @Qidi Q1 Pro 0.4 nozzle;Qidi Generic PLA Silk Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic PLA Silk @Qidi", "from": "system", "setting_id": "VusYzaMdLpjravVc", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json index bbfd984880..76fa98a2b6 100644 --- a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic PLA Silk @Qidi", "renamed_from": "Qidi Generic PLA Silk @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA Silk Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic PLA Silk @Qidi", "from": "system", "setting_id": "9GVORPqwLq0s3mlY", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json index c9fed29f60..d2ebb83e3e 100644 --- a/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PLA Silk @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Qidi", - "inherits": "fdm_filament_pla", "renamed_from": "Qidi Generic PLA Silk", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "qmNmFB6yN23u389x", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.2 nozzle.json index e61e507c68..755924040f 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi Q1 Pro 0.2 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi Q1 Pro 0.2 nozzle;Qidi Generic PLA+ Qidi Q1 Pro 0.2 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "S5IihmYwqdoEXiOT", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.4 nozzle.json index 842010a166..4a5ceebc40 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi Q1 Pro 0.4 nozzle;Qidi Generic PLA+ Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "iZYrNv7L15yrfAPR", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.6 nozzle.json index 1b48ab6b10..09eb399d77 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi Q1 Pro 0.6 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi Q1 Pro 0.6 nozzle;Qidi Generic PLA+ Qidi Q1 Pro 0.6 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "zDYfWdaJGDL64gzD", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.8 nozzle.json index 677620b7b7..7d90ab5d6a 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi Q1 Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi Q1 Pro 0.8 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi Q1 Pro 0.8 nozzle;Qidi Generic PLA+ Qidi Q1 Pro 0.8 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "eAtbANg8BCzaurOY", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.2 nozzle.json index f3fa9ec4b4..ef4ddb5536 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Max 3 0.2 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Max 3 0.2 nozzle;Qidi Generic PLA+ Qidi X-Max 3 0.2 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "ak1iDHwta1iV5CXw", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.6 nozzle.json index 2e151c9e14..5041834b25 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Max 3 0.6 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Max 3 0.6 nozzle;Qidi Generic PLA+ Qidi X-Max 3 0.6 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "JwpYPwMfRZtymarF", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.8 nozzle.json index b829c40c1a..c236f16d65 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Max 3 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Max 3 0.8 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Max 3 0.8 nozzle;Qidi Generic PLA+ Qidi X-Max 3 0.8 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "ZOuRUZf07g43ZV9u", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.2 nozzle.json index 2a761a1946..94d972de5f 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Plus 3 0.2 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Plus 3 0.2 nozzle;Qidi Generic PLA+ Qidi X-Plus 3 0.2 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "DujfIhzIsPDdHZlg", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.6 nozzle.json index 657b16a6a4..9a38c47abf 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Plus 3 0.6 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Plus 3 0.6 nozzle;Qidi Generic PLA+ Qidi X-Plus 3 0.6 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "BA46FjbkAt4dhdfQ", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.8 nozzle.json index 9455380809..f861a4a8b3 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 3 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Plus 3 0.8 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Plus 3 0.8 nozzle;Qidi Generic PLA+ Qidi X-Plus 3 0.8 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "TEqTy5MhYC1CLkrr", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.2 nozzle.json index ecfb501bb0..7a20b6c326 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Plus 4 0.2 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Plus 4 0.2 nozzle;Qidi Generic PLA+ Qidi X-Plus 4 0.2 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "TO1cgOHqLFnimX9m", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.4 nozzle.json index c0ff54ee65..7368ff43ef 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Plus 4 0.4 nozzle;Qidi Generic PLA+ Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "Dyf2Y7pDd4UWIIJ5", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.6 nozzle.json index 5ddca086f7..b3271efaeb 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Plus 4 0.6 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Plus 4 0.6 nozzle;Qidi Generic PLA+ Qidi X-Plus 4 0.6 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "ty1M4Mik83FlDWKj", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.8 nozzle.json index 937e85aff4..1b9f32fb89 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Plus 4 0.8 nozzle;Qidi Generic PLA+ Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "Wyo0NeD4dPzA365C", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.2 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.2 nozzle.json index a32c884550..2b35f41efa 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.2 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Smart 3 0.2 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Smart 3 0.2 nozzle;Qidi Generic PLA+ Qidi X-Smart 3 0.2 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "lypNmywVe3qfhs2q", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.6 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.6 nozzle.json index fe84ef4f8c..d7013cfd45 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Smart 3 0.6 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Smart 3 0.6 nozzle;Qidi Generic PLA+ Qidi X-Smart 3 0.6 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "Hxpe6y8Xo37WmcQr", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.8 nozzle.json index 59a6efb166..e37624442b 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi X-Smart 3 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi X-Smart 3 0.8 nozzle", - "inherits": "Generic PLA+ @Qidi", "renamed_from": "Qidi Generic PLA+ @Qidi X-Smart 3 0.8 nozzle;Qidi Generic PLA+ Qidi X-Smart 3 0.8 nozzle", + "inherits": "Generic PLA+ @Qidi", "from": "system", "setting_id": "2jjI8l22cAXTuxMl", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi.json b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi.json index 2c1e136f6b..c102baea70 100644 --- a/resources/profiles/Qidi/filament/Generic PLA+ @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PLA+ @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA+ @Qidi", - "inherits": "fdm_filament_pla", "renamed_from": "Qidi Generic PLA+", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "JhZ9hP9n1gBNGwBq", "filament_id": "OFEWYR89", diff --git a/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json b/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json index 1381442943..e3981e0cca 100644 --- a/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PLA-CF @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Qidi", - "inherits": "fdm_filament_pla", "renamed_from": "Qidi Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "XspRlBSqR3DsiFBM", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Qidi/filament/Generic PVA @Qidi.json b/resources/profiles/Qidi/filament/Generic PVA @Qidi.json index ffd25855a1..d38624664c 100644 --- a/resources/profiles/Qidi/filament/Generic PVA @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic PVA @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Qidi", - "inherits": "fdm_filament_pva", "renamed_from": "Qidi Generic PVA", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "dmGcoGkH9lvmgsJL", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json index 3fab5170d7..57cf52644e 100644 --- a/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle", - "inherits": "Generic TPU 95A @Qidi", "renamed_from": "Qidi Generic TPU 95A @Qidi Q1 Pro 0.8 nozzle;Qidi Generic TPU 95A Qidi Q1 Pro 0.8 nozzle", + "inherits": "Generic TPU 95A @Qidi", "from": "system", "setting_id": "lwRnIxnWLYp1Hww4", "filament_id": "OFjiXpyf", diff --git a/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle.json b/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle.json index 7e964fd0b8..5e7c3dffa0 100644 --- a/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle", - "inherits": "Generic TPU 95A @Qidi", "renamed_from": "Qidi Generic TPU 95A @Qidi X-Plus 4 0.8 nozzle;Qidi Generic TPU 95A Qidi X-Plus 4 0.8 nozzle", + "inherits": "Generic TPU 95A @Qidi", "from": "system", "setting_id": "BPUUHxYPhHcPIWs9", "filament_id": "OFjiXpyf", diff --git a/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi.json b/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi.json index 2c9602ee2e..330c6fbeee 100644 --- a/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic TPU 95A @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU 95A @Qidi", - "inherits": "fdm_filament_tpu", "renamed_from": "Qidi Generic TPU 95A", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "nXjylLuhXqtlLGEv", "filament_id": "OFjiXpyf", diff --git a/resources/profiles/Qidi/filament/Generic TPU @Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic TPU @Qidi Q1 Pro 0.4 nozzle.json index 93793f8d8e..6df699563f 100644 --- a/resources/profiles/Qidi/filament/Generic TPU @Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic TPU @Qidi Q1 Pro 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Qidi Q1 Pro 0.4 nozzle", - "inherits": "Generic TPU @Qidi", "renamed_from": "Qidi Generic TPU @Qidi Q1 Pro 0.4 nozzle;Qidi Generic TPU Qidi Q1 Pro 0.4 nozzle", + "inherits": "Generic TPU @Qidi", "from": "system", "setting_id": "ToMKfKFZDCHyEHw9", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Qidi/filament/Generic TPU @Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/filament/Generic TPU @Qidi X-Plus 4 0.4 nozzle.json index f1c8117c47..5e75f2e8c9 100644 --- a/resources/profiles/Qidi/filament/Generic TPU @Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/Generic TPU @Qidi X-Plus 4 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Qidi X-Plus 4 0.4 nozzle", - "inherits": "Generic TPU @Qidi", "renamed_from": "Qidi Generic TPU @Qidi X-Plus 4 0.4 nozzle;Qidi Generic TPU Qidi X-Plus 4 0.4 nozzle", + "inherits": "Generic TPU @Qidi", "from": "system", "setting_id": "AACIHxmLhuNAGo6d", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Qidi/filament/Generic TPU @Qidi.json b/resources/profiles/Qidi/filament/Generic TPU @Qidi.json index a525b49520..d34a036466 100644 --- a/resources/profiles/Qidi/filament/Generic TPU @Qidi.json +++ b/resources/profiles/Qidi/filament/Generic TPU @Qidi.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Qidi", - "inherits": "fdm_filament_tpu", "renamed_from": "Qidi Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "0jwJs0mTFs0904VK", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.2 nozzle.json index 32352a70c8..7debd40941 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "v4Of6ePWz1oGVLqU", "name": "Bambu ABS @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "v4Of6ePWz1oGVLqU", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.4 nozzle.json index 8b6bc2ebb6..80a312cc50 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "K3KqxJ3z6lSKoCsQ", "name": "Bambu ABS @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "K3KqxJ3z6lSKoCsQ", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.6 nozzle.json index 3fa0dfca1f..4cce902594 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "D3OOS6ShJDdn4dlU", "name": "Bambu ABS @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "D3OOS6ShJDdn4dlU", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.8 nozzle.json index 833774ecff..a71a5904d9 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu ABS @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "8zWM4mqGjwjy2yJb", "name": "Bambu ABS @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "8zWM4mqGjwjy2yJb", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu ABS @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Bambu ABS @X-Plus 5.json index 0e0fdb08b0..ee457bf4e8 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu ABS @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Bambu ABS @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFhuaUQB", "name": "Bambu ABS@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFhuaUQB", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.2 nozzle.json index 67725a5ee4..185809e35c 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "ed9ZVS66ll61akjK", "name": "Bambu PETG @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "ed9ZVS66ll61akjK", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.4 nozzle.json index 953359bb36..008572349b 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "mPLqTb7smgIDOZTg", "name": "Bambu PETG @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "mPLqTb7smgIDOZTg", + "instantiation": "true", "pressure_advance": [ "0.056" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.6 nozzle.json index 77014127cd..e34ce6538c 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "A3K4JfwyqUnciD2e", "name": "Bambu PETG @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "A3K4JfwyqUnciD2e", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.8 nozzle.json index 3e95da1618..a8dfcfb925 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PETG @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "4qjG4MYXmLPJ5Qjm", "name": "Bambu PETG @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "4qjG4MYXmLPJ5Qjm", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PETG @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Bambu PETG @X-Plus 5.json index ef6ea57354..714f89223c 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PETG @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PETG @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFLYDngx", "name": "Bambu PETG@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFLYDngx", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.2 nozzle.json index 8cebbd7581..d3bdaf4de5 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "cI5eJwzwoecS97SU", "name": "Bambu PLA @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "cI5eJwzwoecS97SU", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.4 nozzle.json index 3e7d24cf85..f8d805f9cf 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "UP5ST3BYA3nWaT5i", "name": "Bambu PLA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "UP5ST3BYA3nWaT5i", + "instantiation": "true", "pressure_advance": [ "0.034" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.6 nozzle.json index e3e192d1e8..984e925e9d 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "jSFJn0WmV76aBwPt", "name": "Bambu PLA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "jSFJn0WmV76aBwPt", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.8 nozzle.json index 2390355042..f9f59c8f53 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PLA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "MYCn1SS32p63RzX0", "name": "Bambu PLA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Bambu PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "MYCn1SS32p63RzX0", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/Bambu PLA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Bambu PLA @X-Plus 5.json index ad90cb8a81..244c43220a 100644 --- a/resources/profiles/Qidi/filament/X5/Bambu PLA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Bambu PLA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF1dpPrW", "name": "Bambu PLA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF1dpPrW", + "instantiation": "false", "filament_adhesiveness_category": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.2 nozzle.json index c12bcc6687..fe7c8c77cb 100644 --- a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "xxRxeoAbiYJcH1P4", "name": "Generic ABS @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "xxRxeoAbiYJcH1P4", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.4 nozzle.json index 7807bc8420..96f99c0806 100644 --- a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "MM6yfNPfpCtbsm2M", "name": "Generic ABS @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "MM6yfNPfpCtbsm2M", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.6 nozzle.json index 6de2b02613..974d4f2294 100644 --- a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "BIiPt2AExUkASm2F", "name": "Generic ABS @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "BIiPt2AExUkASm2F", + "instantiation": "true", "filament_max_volumetric_speed": [ "24.5" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.8 nozzle.json index 6e7bda8441..4db5f22815 100644 --- a/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic ABS @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "VzKqGnik79qlJ1bA", "name": "Generic ABS @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "VzKqGnik79qlJ1bA", + "instantiation": "true", "filament_max_volumetric_speed": [ "24.5" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json index 79a52578a4..df28065bdb 100644 --- a/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Generic ABS @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFY9muEs", "name": "Generic ABS@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFY9muEs", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.2 nozzle.json index da5c50af1a..ad3e9d3128 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "ERbh7DQQfK7A623W", "name": "Generic PC @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PC@X-Plus 5-Series", + "from": "system", + "setting_id": "ERbh7DQQfK7A623W", + "instantiation": "true", "filament_flow_ratio": [ "0.94" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.4 nozzle.json index 487d8dd31d..ede9e25962 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "MK8OyxUEziAeEbXk", "name": "Generic PC @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PC@X-Plus 5-Series", + "from": "system", + "setting_id": "MK8OyxUEziAeEbXk", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.6 nozzle.json index 90829d6463..a7aa10707f 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "EQIfBmyVNumOKVWU", "name": "Generic PC @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PC@X-Plus 5-Series", + "from": "system", + "setting_id": "EQIfBmyVNumOKVWU", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.8 nozzle.json index 514715f8a2..adb328a7f5 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PC @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "FsTuQT5hxmfjHyVZ", "name": "Generic PC @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PC@X-Plus 5-Series", + "from": "system", + "setting_id": "FsTuQT5hxmfjHyVZ", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PC @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic PC @X-Plus 5.json index 79745adfce..22a8e9ae48 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PC @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Generic PC @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFLakOUI", "name": "Generic PC@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFLakOUI", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.2 nozzle.json index 2b4e220a54..ddb382e1b4 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "KaxkabCgu6EWZBzj", "name": "Generic PETG @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "KaxkabCgu6EWZBzj", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.4 nozzle.json index 4da60c3c48..d92c9c31e3 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "ckqzES7LsTgYKKhb", "name": "Generic PETG @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "ckqzES7LsTgYKKhb", + "instantiation": "true", "pressure_advance": [ "0.056" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.6 nozzle.json index 6f1b9667ab..27071937e8 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "1ID4LaQVZN4WjJ4v", "name": "Generic PETG @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "1ID4LaQVZN4WjJ4v", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.8 nozzle.json index 764e313efe..2948194a2a 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PETG @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "yzkFoRA3R01K3lCa", "name": "Generic PETG @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "yzkFoRA3R01K3lCa", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PETG @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic PETG @X-Plus 5.json index 0e65fe68f7..ccbd996499 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PETG @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Generic PETG @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFYPdQJh", "name": "Generic PETG@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFYPdQJh", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.2 nozzle.json index 218b407d21..704366e9a4 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "m5zUk3OpAayCbBwF", "name": "Generic PLA @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "m5zUk3OpAayCbBwF", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.4 nozzle.json index c8dd22aba5..a7d0a7552d 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "5Eorr9nKVhLbnYAZ", "name": "Generic PLA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "5Eorr9nKVhLbnYAZ", + "instantiation": "true", "pressure_advance": [ "0.034" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.6 nozzle.json index ee352a5667..bb9627c447 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "nqOawjrkU2lp3P0K", "name": "Generic PLA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "nqOawjrkU2lp3P0K", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.8 nozzle.json index 14a7fa59c1..0c25dc2848 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "nA20S71nTMCso0Bn", "name": "Generic PLA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "nA20S71nTMCso0Bn", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic PLA @X-Plus 5.json index 3b7690cc38..2d41995886 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFDSrzZ8", "name": "Generic PLA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFDSrzZ8", + "instantiation": "false", "additional_cooling_fan_speed": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle.json index f701cf5b50..3d298c969a 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "42feLKkUTBQTPNDm", "name": "Generic PLA Silk @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA Silk@X-Plus 5-Series", + "from": "system", + "setting_id": "42feLKkUTBQTPNDm", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle.json index b898df762a..755122bcfd 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "uyCmwBkoRNNRbG5R", "name": "Generic PLA Silk @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA Silk@X-Plus 5-Series", + "from": "system", + "setting_id": "uyCmwBkoRNNRbG5R", + "instantiation": "true", "pressure_advance": [ "0.014" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA Silk @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic PLA Silk @X-Plus 5.json index afa64cc602..d4470e4420 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA Silk @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA Silk @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFesA6rF", "name": "Generic PLA Silk@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFesA6rF", + "instantiation": "false", "additional_cooling_fan_speed": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.2 nozzle.json index a7a736a95a..33abeac017 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "aD9SNuHAOxVFczNM", "name": "Generic PLA+ @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA+@X-Plus 5-Series", + "from": "system", + "setting_id": "aD9SNuHAOxVFczNM", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.4 nozzle.json index e10196f45c..2bbaf88d12 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "QDAKF2VaO4MkiYZ7", "name": "Generic PLA+ @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA+@X-Plus 5-Series", + "from": "system", + "setting_id": "QDAKF2VaO4MkiYZ7", + "instantiation": "true", "pressure_advance": [ "0.034" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.6 nozzle.json index 62c8ce9de1..faac0f9236 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "kNONALYQIZ8hkU2f", "name": "Generic PLA+ @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA+@X-Plus 5-Series", + "from": "system", + "setting_id": "kNONALYQIZ8hkU2f", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.8 nozzle.json index 78599cb326..cbe051a130 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA+ @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "ehm8mY40hPq6Bjby", "name": "Generic PLA+ @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA+@X-Plus 5-Series", + "from": "system", + "setting_id": "ehm8mY40hPq6Bjby", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic PLA+ @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic PLA+ @X-Plus 5.json index 72d7b6f9c6..13769cac67 100644 --- a/resources/profiles/Qidi/filament/X5/Generic PLA+ @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Generic PLA+ @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFEWYR89", "name": "Generic PLA+@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFEWYR89", + "instantiation": "false", "additional_cooling_fan_speed": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle.json index 525652742c..db09af9899 100644 --- a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "blCxzXDeplxz7FrS", "name": "Generic TPU 95A @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic TPU 95A@X-Plus 5-Series", + "from": "system", + "setting_id": "blCxzXDeplxz7FrS", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle.json index f17a6e91e5..023195f39f 100644 --- a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "mXwJpelMKlY7SQR8", "name": "Generic TPU 95A @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic TPU 95A@X-Plus 5-Series", + "from": "system", + "setting_id": "mXwJpelMKlY7SQR8", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle.json index 072983e488..482a66f549 100644 --- a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "o9NLhClfpsJFEE3P", "name": "Generic TPU 95A @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Generic TPU 95A@X-Plus 5-Series", + "from": "system", + "setting_id": "o9NLhClfpsJFEE3P", + "instantiation": "true", "nozzle_temperature": [ "220" ], diff --git a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @X-Plus 5.json index b98a3a0a2f..7a9f80d609 100644 --- a/resources/profiles/Qidi/filament/X5/Generic TPU 95A @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Generic TPU 95A @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFjiXpyf", "name": "Generic TPU 95A@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFjiXpyf", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "30" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle.json index 2346539b73..ad98af14f4 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "uarx8NrJerlKsoA8", "name": "HATCHBOX ABS @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "uarx8NrJerlKsoA8", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle.json index 4566ece152..902fe4e144 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "T52l6W0u1uoiXrAx", "name": "HATCHBOX ABS @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "T52l6W0u1uoiXrAx", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle.json index bb16d32b06..ec263bee9b 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "krTIEBmeK9q2R60M", "name": "HATCHBOX ABS @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "krTIEBmeK9q2R60M", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle.json index 19b4ce995f..aefeac6176 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "B99z7PiwClkWtyqv", "name": "HATCHBOX ABS @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "B99z7PiwClkWtyqv", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @X-Plus 5.json index 323fcf3e90..7142ad1de3 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX ABS @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFwLBAGf", "name": "HATCHBOX ABS@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFwLBAGf", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle.json index dc87553374..47ba45ca0c 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "2y03Jbrd8epf06MW", "name": "HATCHBOX PETG @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "2y03Jbrd8epf06MW", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle.json index 21441a8d3e..863b7cc3f2 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "KHbEUzPhVICXYhTs", "name": "HATCHBOX PETG @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "KHbEUzPhVICXYhTs", + "instantiation": "true", "pressure_advance": [ "0.056" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle.json index 85219cea79..90413c57b2 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "3HPxSQqEM8XGZqgU", "name": "HATCHBOX PETG @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "3HPxSQqEM8XGZqgU", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle.json index c6b4b699cd..c71cb3a6ec 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "eZnTfUmPGkeoEP87", "name": "HATCHBOX PETG @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PETG@X-Plus 5-Series", + "from": "system", + "setting_id": "eZnTfUmPGkeoEP87", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @X-Plus 5.json index 6f0495c45b..ab0b15a5f7 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PETG @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFIWMSGX", "name": "HATCHBOX PETG@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFIWMSGX", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle.json index a1838c2041..12ebb48fcf 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Sn0LAKII01kQONZS", "name": "HATCHBOX PLA @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "Sn0LAKII01kQONZS", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle.json index 82e54e389e..dc60b97e1d 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "HWmejqWfehK4LG6C", "name": "HATCHBOX PLA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "HWmejqWfehK4LG6C", + "instantiation": "true", "pressure_advance": [ "0.034" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle.json index d6ac4c9a7e..0c08bf069f 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "zjIVoA34wN8AT6cp", "name": "HATCHBOX PLA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "zjIVoA34wN8AT6cp", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle.json index 5b89e541e3..e1e42418d9 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "sTjweBRTvE0P6YtE", "name": "HATCHBOX PLA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "HATCHBOX PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "sTjweBRTvE0P6YtE", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @X-Plus 5.json index 7ee05c27f7..056f920c67 100644 --- a/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/HATCHBOX PLA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFeelsSM", "name": "HATCHBOX PLA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFeelsSM", + "instantiation": "false", "filament_adhesiveness_category": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.2 nozzle.json index 7194b54b7f..e65fd300ae 100644 --- a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "tLj2E2dWAdLKpC4K", "name": "Overture ABS @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "tLj2E2dWAdLKpC4K", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.4 nozzle.json index 5e50aa5dbc..556a0d1708 100644 --- a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "1IkBG0ywAkk3VhOd", "name": "Overture ABS @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "1IkBG0ywAkk3VhOd", + "instantiation": "true", "pressure_advance": [ "0.033" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.6 nozzle.json index 9bacef9d3a..36b67e90b2 100644 --- a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "4SXA27uTG5kcbnAq", "name": "Overture ABS @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "4SXA27uTG5kcbnAq", + "instantiation": "true", "pressure_advance": [ "0.02" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.8 nozzle.json index a53148ed26..fcdf219ca0 100644 --- a/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture ABS @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "AzC8XjbkzsxEPDMG", "name": "Overture ABS @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "AzC8XjbkzsxEPDMG", + "instantiation": "true", "pressure_advance": [ "0.01" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture ABS @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Overture ABS @X-Plus 5.json index 82863e8d80..19084c236d 100644 --- a/resources/profiles/Qidi/filament/X5/Overture ABS @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Overture ABS @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFK8XHPn", "name": "Overture ABS@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFK8XHPn", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.2 nozzle.json index f209b21a6e..9cea361938 100644 --- a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "2TAd2Dlk6KPvvmMg", "name": "Overture PLA @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "2TAd2Dlk6KPvvmMg", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.4 nozzle.json index a625953f60..a48b32d09a 100644 --- a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "1rKASIobH0DqQUeH", "name": "Overture PLA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "1rKASIobH0DqQUeH", + "instantiation": "true", "pressure_advance": [ "0.037" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.6 nozzle.json index 5a3dfdee8f..7f9e0702d4 100644 --- a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "UWQ7bLf74AxEPDdc", "name": "Overture PLA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "UWQ7bLf74AxEPDdc", + "instantiation": "true", "pressure_advance": [ "0.019" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.8 nozzle.json index 86d8605933..6da685b581 100644 --- a/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Overture PLA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "bIg1NW0EwTlmRNAF", "name": "Overture PLA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Overture PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "bIg1NW0EwTlmRNAF", + "instantiation": "true", "pressure_advance": [ "0.012" ], diff --git a/resources/profiles/Qidi/filament/X5/Overture PLA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Overture PLA @X-Plus 5.json index 0dbb498feb..3ef4391d22 100644 --- a/resources/profiles/Qidi/filament/X5/Overture PLA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Overture PLA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFc3xdm9", "name": "Overture PLA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFc3xdm9", + "instantiation": "false", "filament_adhesiveness_category": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.2 nozzle.json index 0618d3c36f..232efa107a 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "AJYooe7fIzg43McT", "name": "PolyLite ABS @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "AJYooe7fIzg43McT", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.4 nozzle.json index 36e012b0d6..927c0262a1 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "S0uCyMruXw5waEYf", "name": "PolyLite ABS @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "S0uCyMruXw5waEYf", + "instantiation": "true", "pressure_advance": [ "0.033" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.6 nozzle.json index 1bf7cdf030..986b891898 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "oYlfF3MMF5DEeJpK", "name": "PolyLite ABS @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "oYlfF3MMF5DEeJpK", + "instantiation": "true", "pressure_advance": [ "0.02" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.8 nozzle.json index 9d1f541dfc..8167d40eda 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite ABS @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "hHXz74Ps9x4T7kZl", "name": "PolyLite ABS @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite ABS@X-Plus 5-Series", + "from": "system", + "setting_id": "hHXz74Ps9x4T7kZl", + "instantiation": "true", "pressure_advance": [ "0.01" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite ABS @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/PolyLite ABS @X-Plus 5.json index 1cf57f8ce3..f58163af9f 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite ABS @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite ABS @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFOvv91M", "name": "PolyLite ABS@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFOvv91M", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.2 nozzle.json index f823b38e67..60378002c0 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "kKfybaeH6Llb3Vdc", "name": "PolyLite PLA @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "kKfybaeH6Llb3Vdc", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.4 nozzle.json index b7f3ef07f6..41678a9375 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "hzEsCxIKwuV2ubrz", "name": "PolyLite PLA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "hzEsCxIKwuV2ubrz", + "instantiation": "true", "pressure_advance": [ "0.037" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.6 nozzle.json index 8b98d3842a..1ad4796c5b 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "PODs7XKIgMiJZI5x", "name": "PolyLite PLA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "PODs7XKIgMiJZI5x", + "instantiation": "true", "pressure_advance": [ "0.019" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.8 nozzle.json index f4b6b8c2ee..7dec540c25 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite PLA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "LQ1rP7NSTjw2moHk", "name": "PolyLite PLA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "PolyLite PLA@X-Plus 5-Series", + "from": "system", + "setting_id": "LQ1rP7NSTjw2moHk", + "instantiation": "true", "pressure_advance": [ "0.012" ], diff --git a/resources/profiles/Qidi/filament/X5/PolyLite PLA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/PolyLite PLA @X-Plus 5.json index 4702c9ba1c..b33091774b 100644 --- a/resources/profiles/Qidi/filament/X5/PolyLite PLA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/PolyLite PLA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF5CgdDq", "name": "PolyLite PLA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF5CgdDq", + "instantiation": "false", "filament_adhesiveness_category": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle.json index 78389ceeb5..9d31e4b943 100644 --- a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "p9cDXBgbjwjOX5me", "name": "Polymaker PLA-HT @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Polymaker PLA-HT@X-Plus 5-Series", + "from": "system", + "setting_id": "p9cDXBgbjwjOX5me", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle.json index 9f77b41119..9088048ab5 100644 --- a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "TpI2jqmcVygyTO8N", "name": "Polymaker PLA-HT @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Polymaker PLA-HT@X-Plus 5-Series", + "from": "system", + "setting_id": "TpI2jqmcVygyTO8N", + "instantiation": "true", "pressure_advance": [ "0.037" ], diff --git a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle.json index 3c46385369..ba1b143068 100644 --- a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "69AgpjCCTxF5ffW1", "name": "Polymaker PLA-HT @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Polymaker PLA-HT@X-Plus 5-Series", + "from": "system", + "setting_id": "69AgpjCCTxF5ffW1", + "instantiation": "true", "pressure_advance": [ "0.019" ], diff --git a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle.json index 788db83504..314c12302a 100644 --- a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "tcoQNICpWYGdE24e", "name": "Polymaker PLA-HT @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Polymaker PLA-HT@X-Plus 5-Series", + "from": "system", + "setting_id": "tcoQNICpWYGdE24e", + "instantiation": "true", "pressure_advance": [ "0.012" ], diff --git a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @X-Plus 5.json index 233542bab1..4cb74f25b5 100644 --- a/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/Polymaker PLA-HT @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFfYHK5z", "name": "Polymaker PLA-HT@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFfYHK5z", + "instantiation": "false", "filament_adhesiveness_category": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle.json index 254422bb19..7e2954ea55 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "8SvrXXv743rCyyeN", "name": "QIDI ABS Odorless @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Odorless@X-Plus 5-Series", + "from": "system", + "setting_id": "8SvrXXv743rCyyeN", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle.json index 1bd37ac08a..c1af1b6f1c 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "YviPsfkGYv6Q3r3T", "name": "QIDI ABS Odorless @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Odorless@X-Plus 5-Series", + "from": "system", + "setting_id": "YviPsfkGYv6Q3r3T", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle.json index cbb361fb9c..0ec0bd3a8b 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "YLOcbaCppSmQ1twv", "name": "QIDI ABS Odorless @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Odorless@X-Plus 5-Series", + "from": "system", + "setting_id": "YLOcbaCppSmQ1twv", + "instantiation": "true", "filament_max_volumetric_speed": [ "24.5" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle.json index 912dc04ed7..a0a88a324e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Klsu6iALsWgbg3vK", "name": "QIDI ABS Odorless @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Odorless@X-Plus 5-Series", + "from": "system", + "setting_id": "Klsu6iALsWgbg3vK", + "instantiation": "true", "filament_max_volumetric_speed": [ "24.5" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @X-Plus 5.json index 7a80b433df..c5b84a18fb 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Odorless @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFma5TXH", "name": "QIDI ABS Odorless@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFma5TXH", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle.json index 99a9e16c08..892be9f985 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "bTwNiMSHwex0gxrd", "name": "QIDI ABS Rapido @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "bTwNiMSHwex0gxrd", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle.json index 30086f5dce..c22b5114cc 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "mcPlHcr33zPv3aIf", "name": "QIDI ABS Rapido @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "mcPlHcr33zPv3aIf", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle.json index 47278a61b1..4ace571ef5 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "0np334pRpl3qa8Uq", "name": "QIDI ABS Rapido @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "0np334pRpl3qa8Uq", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle.json index f79fcfdfac..4307b82a73 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Vp2bJxFhsPvW6K0P", "name": "QIDI ABS Rapido @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "Vp2bJxFhsPvW6K0P", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @X-Plus 5.json index 0afffa18f4..5b5626a5f7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFT2jon4", "name": "QIDI ABS Rapido@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFT2jon4", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json index 34632b393f..cba33e6e48 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "U69dFGlkEk9twDF6", "name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "U69dFGlkEk9twDF6", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json index 59492201a5..4ccea8f40b 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "XaJbATawtVrUsXpz", "name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "XaJbATawtVrUsXpz", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json index 93b4cb3aba..cb23a6e9aa 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Xb0A7YqmqP2peSM3", "name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "Xb0A7YqmqP2peSM3", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json index c4edce73be..bf577771af 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "4AA9wGDNebbTHf4X", "name": "QIDI ABS Rapido Metal @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "4AA9wGDNebbTHf4X", + "instantiation": "true", "nozzle_temperature": [ "250" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @X-Plus 5.json index 9614cab30f..5e0f760698 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS Rapido Metal @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFeCJqxx", "name": "QIDI ABS Rapido Metal@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFeCJqxx", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle.json index d81d623d33..27c682c04b 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "V9h7YWcaTejmFCh0", "name": "QIDI ABS-GF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "V9h7YWcaTejmFCh0", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle.json index 88ee5f2146..1a0fd60db1 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "hO8H1GUCzMkwFtQH", "name": "QIDI ABS-GF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "hO8H1GUCzMkwFtQH", + "instantiation": "true", "pressure_advance": [ "0.01" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle.json index 997e67a0f0..6691f987d0 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "LskHdeEngKlRCSmg", "name": "QIDI ABS-GF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ABS-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "LskHdeEngKlRCSmg", + "instantiation": "true", "pressure_advance": [ "0.01" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @X-Plus 5.json index 5336842811..59c26ea74c 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ABS-GF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFt3HtlG", "name": "QIDI ABS-GF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFt3HtlG", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.2 nozzle.json index d417265f5a..9b5ee8720f 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "FgeIGgT8xZCm4UO8", "name": "QIDI ASA @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA@X-Plus 5-Series", + "from": "system", + "setting_id": "FgeIGgT8xZCm4UO8", + "instantiation": "true", "chamber_temperatures": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.4 nozzle.json index ed86d714a1..e42e13f776 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "VRicNQizOCKkgLBJ", "name": "QIDI ASA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA@X-Plus 5-Series", + "from": "system", + "setting_id": "VRicNQizOCKkgLBJ", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.6 nozzle.json index a7870accce..a071f0b7f0 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "KDjln7WdhhbSztX3", "name": "QIDI ASA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA@X-Plus 5-Series", + "from": "system", + "setting_id": "KDjln7WdhhbSztX3", + "instantiation": "true", "filament_max_volumetric_speed": [ "13" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.8 nozzle.json index 30496917d1..73ce4a3d38 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "X9TOBuOKBbJIoF7y", "name": "QIDI ASA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA@X-Plus 5-Series", + "from": "system", + "setting_id": "X9TOBuOKBbJIoF7y", + "instantiation": "true", "filament_max_volumetric_speed": [ "13" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI ASA @X-Plus 5.json index b8fe444dd2..624e97dbd0 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFTsHNQi", "name": "QIDI ASA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFTsHNQi", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle.json index 08a4ed22a9..a5979282e9 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "g5F7NP83yx0Iub4c", "name": "QIDI ASA-Aero @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA-Aero@X-Plus 5-Series", + "from": "system", + "setting_id": "g5F7NP83yx0Iub4c", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @X-Plus 5.json index 73fb83834d..2e186ef10c 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA-Aero @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFu1E4ur", "name": "QIDI ASA-Aero@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFu1E4ur", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle.json index be97fdfd58..295be4eefa 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Aqh00EJ8ZaiPCU6F", "name": "QIDI ASA-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "Aqh00EJ8ZaiPCU6F", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle.json index cd8bbc98bd..98f3269be5 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "fgwkL5igRvM0leJf", "name": "QIDI ASA-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "fgwkL5igRvM0leJf", + "instantiation": "true", "filament_max_volumetric_speed": [ "13" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle.json index 3095a16138..b4bdf7413b 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "bDAcTzwdiXT4fFnT", "name": "QIDI ASA-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI ASA-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "bDAcTzwdiXT4fFnT", + "instantiation": "true", "filament_max_volumetric_speed": [ "13" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @X-Plus 5.json index 12606c993b..442c6322c8 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI ASA-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF1W7c76", "name": "QIDI ASA-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF1W7c76", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle.json index 165c5cfb62..6bf8f36b07 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "vDXAb7Kkj7nFc8go", "name": "QIDI PA12-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PA12-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "vDXAb7Kkj7nFc8go", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle.json index ad26af1f86..29b7b7a0cd 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "KjZ3jgo2Zoklkk0F", "name": "QIDI PA12-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PA12-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "KjZ3jgo2Zoklkk0F", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle.json index 5324f0c183..e0cf068166 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Xcl3UPe7tmXw9hXa", "name": "QIDI PA12-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PA12-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "Xcl3UPe7tmXw9hXa", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.8 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json index d4af23e160..fd8437e120 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA12-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFn6WpN7", "name": "QIDI PA12-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFn6WpN7", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle.json index fbe5870078..bb8370b591 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "qTjsP8oR1sbh56Gh", "name": "QIDI PA6-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PA6-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "qTjsP8oR1sbh56Gh", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle.json index 016f9bb2e4..255402fa16 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "4kzkdzJmDYGic0aa", "name": "QIDI PA6-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PA6-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "4kzkdzJmDYGic0aa", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle.json index ba0d981c29..20b6fdf5c5 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "97peVPSildpjdDQj", "name": "QIDI PA6-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PA6-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "97peVPSildpjdDQj", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.8 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @X-Plus 5.json index 1c70ef53a0..8ad2e48c7e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PA6-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFZ3K2cL", "name": "QIDI PA6-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFZ3K2cL", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle.json index 68d604414d..11be5e1010 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "3iw5hq0KFa9NU4b3", "name": "QIDI PAHT-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PAHT-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "3iw5hq0KFa9NU4b3", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle.json index 0ca7290e39..22388a4791 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "7eBDjJbetxOC3aNT", "name": "QIDI PAHT-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PAHT-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "7eBDjJbetxOC3aNT", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle.json index b3b88d5f28..99a545da7e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "hkIpB0QZOGZpoYFX", "name": "QIDI PAHT-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PAHT-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "hkIpB0QZOGZpoYFX", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.8 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json index fec939caa8..db77ecc2ca 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFKgmsqE", "name": "QIDI PAHT-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFKgmsqE", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle.json index 9638d33afc..dc6a820d2c 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "R7cctkITobdKgMkY", "name": "QIDI PAHT-GF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PAHT-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "R7cctkITobdKgMkY", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle.json index 4d926ff370..3d1c6d6d9c 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "cVzpHjaSzsDm0bwG", "name": "QIDI PAHT-GF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PAHT-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "cVzpHjaSzsDm0bwG", + "instantiation": "true", "pressure_advance": [ "0.015" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle.json index ce49e3ef04..e706c99f0e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "N0aUkpcJD6CvODci", "name": "QIDI PAHT-GF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PAHT-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "N0aUkpcJD6CvODci", + "instantiation": "true", "pressure_advance": [ "0.01" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json index de72deb697..b0ad404197 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PAHT-GF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFo15hcT", "name": "QIDI PAHT-GF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFo15hcT", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.4 nozzle.json index e4842206ed..331183714a 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "uYwbMiemSo7LxiqR", "name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PC/ABS-FR@X-Plus 5-Series", + "from": "system", + "setting_id": "uYwbMiemSo7LxiqR", + "instantiation": "true", "pressure_advance": [ "0.042" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.6 nozzle.json index 35c317e8d3..a649c493b5 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Fxkv0PN8RU17fkB0", "name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PC/ABS-FR@X-Plus 5-Series", + "from": "system", + "setting_id": "Fxkv0PN8RU17fkB0", + "instantiation": "true", "pressure_advance": [ "0.031" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.8 nozzle.json index 456a93a6d0..4043236cf7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "oKNGzYqymTnWQsBB", "name": "QIDI PC/ABS-FR @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PC/ABS-FR@X-Plus 5-Series", + "from": "system", + "setting_id": "oKNGzYqymTnWQsBB", + "instantiation": "true", "pressure_advance": [ "0.024" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @X-Plus 5.json index c7e407cd2e..29e56dae89 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PC-ABS-FR @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFDIrhbu", "name": "QIDI PC/ABS-FR@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFDIrhbu", + "instantiation": "false", "box_temperature_range_high": [ "50" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle.json index 5fa07706a9..275b1188b4 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "hgdi1oL4EFzh0h7h", "name": "QIDI PEBA 95A @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PEBA 95A@X-Plus 5-Series", + "from": "system", + "setting_id": "hgdi1oL4EFzh0h7h", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle.json index f44261951e..360cea614c 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "iNZpBz1iklW3sJlj", "name": "QIDI PEBA 95A @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PEBA 95A@X-Plus 5-Series", + "from": "system", + "setting_id": "iNZpBz1iklW3sJlj", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @X-Plus 5.json index bf56f12203..9de796f2be 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PEBA 95A @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFhiJE7Y", "name": "QIDI PEBA 95A@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFhiJE7Y", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "30" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle.json index bfdd1aed31..f4a91aa343 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "bILtWMlzBPi4Ft8a", "name": "QIDI PET-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PET-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "bILtWMlzBPi4Ft8a", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle.json index cb78cf3afc..5716a20bb7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "E0Y6g3qpoERrgSUH", "name": "QIDI PET-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PET-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "E0Y6g3qpoERrgSUH", + "instantiation": "true", "pressure_advance": [ "0.025" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle.json index ae40d594ff..c35eddb490 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "e2HuHVJZck2nKANa", "name": "QIDI PET-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PET-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "e2HuHVJZck2nKANa", + "instantiation": "true", "pressure_advance": [ "0.025" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @X-Plus 5.json index 9163c3344e..913df35758 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFKfJTwL", "name": "QIDI PET-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFKfJTwL", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle.json index 97029aeb25..7ea2ee2d4f 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "2NHbKFmgDoN1oHlo", "name": "QIDI PET-GF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PET-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "2NHbKFmgDoN1oHlo", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle.json index 480d13bb65..f189d6847e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "cMlzOMKIIIro4H62", "name": "QIDI PET-GF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PET-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "cMlzOMKIIIro4H62", + "instantiation": "true", "pressure_advance": [ "0.014" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle.json index 2cc0cfe2cb..f83d62dfce 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "evxG7nCDQx2Y5UV5", "name": "QIDI PET-GF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PET-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "evxG7nCDQx2Y5UV5", + "instantiation": "true", "pressure_advance": [ "0.01" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @X-Plus 5.json index 83e68f579f..767ab88e1d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PET-GF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PET-GF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFhx4uOG", "name": "QIDI PET-GF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFhx4uOG", + "instantiation": "false", "box_temperature_range_high": [ "50" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle.json index 6689cca71a..ee872fe154 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "k4jOZFY5QV2bMKHK", "name": "QIDI PETG Basic @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "k4jOZFY5QV2bMKHK", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle.json index c1b29f1b75..6fe6c7bb9e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "b55sLpGKCrWLiDPf", "name": "QIDI PETG Basic @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "b55sLpGKCrWLiDPf", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle.json index 3be97a337f..27a8aa59bf 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "XcxbsZ4d8Dh21WX0", "name": "QIDI PETG Basic @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "XcxbsZ4d8Dh21WX0", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle.json index 92a57fb1b8..3c35473c25 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "9MEoOjLU7AOCvb9X", "name": "QIDI PETG Basic @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "9MEoOjLU7AOCvb9X", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @X-Plus 5.json index 7254fd50bb..ab14286d6d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Basic @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFuJ49uH", "name": "QIDI PETG Basic@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFuJ49uH", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle.json index 220a6ce55a..151b6bafd4 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "oi5JKM4fwEYHefs0", "name": "QIDI PETG Rapido @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "oi5JKM4fwEYHefs0", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle.json index 9fe3affac2..9c695c8b5a 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "SZOwb16vrcdtaDzJ", "name": "QIDI PETG Rapido @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "SZOwb16vrcdtaDzJ", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle.json index a550919113..3b0ee18299 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "4LKxL4N0ccD6vZ60", "name": "QIDI PETG Rapido @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "4LKxL4N0ccD6vZ60", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle.json index b56b55d1ff..70e2c8de58 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "rsNDDt3IFUOMYV3O", "name": "QIDI PETG Rapido @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "rsNDDt3IFUOMYV3O", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @X-Plus 5.json index 01a3e6cabe..89af24cc85 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Rapido @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF4S3To3", "name": "QIDI PETG Rapido@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF4S3To3", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle.json index 7708ebba0d..b74a782893 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "k4kLQheLeWOw8bwp", "name": "QIDI PETG Tough @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Tough@X-Plus 5-Series", + "from": "system", + "setting_id": "k4kLQheLeWOw8bwp", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle.json index 5c8c182a2b..46d3107ff9 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "WEyrSDtW2CJeLQmg", "name": "QIDI PETG Tough @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Tough@X-Plus 5-Series", + "from": "system", + "setting_id": "WEyrSDtW2CJeLQmg", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle.json index ad75cc5722..6949cb951d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "Morgo6GIzU3Voc0Q", "name": "QIDI PETG Tough @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Tough@X-Plus 5-Series", + "from": "system", + "setting_id": "Morgo6GIzU3Voc0Q", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle.json index 37c0beddb9..9b02b7f1c8 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "DsoxBXKOjsENLEZf", "name": "QIDI PETG Tough @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Tough@X-Plus 5-Series", + "from": "system", + "setting_id": "DsoxBXKOjsENLEZf", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @X-Plus 5.json index ed1b218139..65bcd87f2d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Tough @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFQ40XeN", "name": "QIDI PETG Tough@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFQ40XeN", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle.json index 03e72feba9..63875362fe 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "2UJnG0rXeU2nCIQL", "name": "QIDI PETG Translucent @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Translucent@X-Plus 5-Series", + "from": "system", + "setting_id": "2UJnG0rXeU2nCIQL", + "instantiation": "true", "filament_max_volumetric_speed": [ "1" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle.json index 545bd42538..9730016f67 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "S2DQ7jy5KqbiVNnV", "name": "QIDI PETG Translucent @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Translucent@X-Plus 5-Series", + "from": "system", + "setting_id": "S2DQ7jy5KqbiVNnV", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle.json index 963916f76e..929eff1456 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "G33dlk73weGNFNwg", "name": "QIDI PETG Translucent @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Translucent@X-Plus 5-Series", + "from": "system", + "setting_id": "G33dlk73weGNFNwg", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle.json index 42bf38bde4..b6a99d1f9d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "zqI9F8vplNFfm2pa", "name": "QIDI PETG Translucent @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG Translucent@X-Plus 5-Series", + "from": "system", + "setting_id": "zqI9F8vplNFfm2pa", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @X-Plus 5.json index 94792b7a75..5bedf7bcf2 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG Translucent @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFf0MkD5", "name": "QIDI PETG Translucent@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFf0MkD5", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle.json index 04176974f5..15b1691904 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "cXbQtMQKmAFqwmqK", "name": "QIDI PETG-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "cXbQtMQKmAFqwmqK", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle.json index ce16a13acf..a828f3958b 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "YNIWSLXvW6kSPRFG", "name": "QIDI PETG-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "YNIWSLXvW6kSPRFG", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle.json index e1ce42ee0a..19a87d0ea7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "O0lwfGXO3BdPCask", "name": "QIDI PETG-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "O0lwfGXO3BdPCask", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @X-Plus 5.json index 19f7f473dd..91a9dbcc9f 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF4iWKrE", "name": "QIDI PETG-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF4iWKrE", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle.json index 46b3b1176a..3a81d10184 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "zfI1VXQ7E0re78CC", "name": "QIDI PETG-GF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "zfI1VXQ7E0re78CC", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle.json index 4af6b7db02..77eb2fc3b4 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "zYEbjZPipK4BgHRO", "name": "QIDI PETG-GF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "zYEbjZPipK4BgHRO", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle.json index bf819e04a9..2388ed7488 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "5ef246YwGEK0eVCr", "name": "QIDI PETG-GF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PETG-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "5ef246YwGEK0eVCr", + "instantiation": "true", "pressure_advance": [ "0.04" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @X-Plus 5.json index 3bed003091..a278471f44 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PETG-GF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFdtPd9h", "name": "QIDI PETG-GF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFdtPd9h", + "instantiation": "false", "box_temperature_range_high": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle.json index 4ec7f05eb9..7ccc28f4ea 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "sfrpgBzPufKwgBCT", "name": "QIDI PLA Basic @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "sfrpgBzPufKwgBCT", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle.json index 20dd378bd2..a0ca3347bd 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "6ZscfuWENwCkdSYE", "name": "QIDI PLA Basic @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "6ZscfuWENwCkdSYE", + "instantiation": "true", "pressure_advance": [ "0.038" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle.json index 574e748c98..ebb3690322 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "pEry2GMq8UJEw7c7", "name": "QIDI PLA Basic @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "pEry2GMq8UJEw7c7", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle.json index 527eb00054..73c062b226 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "MTq8xcAKCWABLI2k", "name": "QIDI PLA Basic @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "MTq8xcAKCWABLI2k", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @X-Plus 5.json index 30e12990e3..5e0fe80a47 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Basic @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF4nQ62r", "name": "QIDI PLA Basic@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF4nQ62r", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle.json index 0078600f36..f70f0cc585 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "54iiCCwizthHtT1v", "name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Matte Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "54iiCCwizthHtT1v", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle.json index d67aa77dc4..b5a20a483f 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "ojnl8sBbBL4QBL8q", "name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Matte Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "ojnl8sBbBL4QBL8q", + "instantiation": "true", "pressure_advance": [ "0.038" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle.json index 6575396e45..479b0f01d7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "XtZarwF2HIipdHjN", "name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Matte Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "XtZarwF2HIipdHjN", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle.json index 8c4584a70b..23fa3c1ce8 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "TRkCNQeoDvLBaJMt", "name": "QIDI PLA Matte Basic @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Matte Basic@X-Plus 5-Series", + "from": "system", + "setting_id": "TRkCNQeoDvLBaJMt", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @X-Plus 5.json index 2843092024..f59be1d0c7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Matte Basic @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFughwKn", "name": "QIDI PLA Matte Basic@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFughwKn", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle.json index 3ea3dac12f..e963435867 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "S56TixVPmXr4uFut", "name": "QIDI PLA Rapido @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "S56TixVPmXr4uFut", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle.json index 178fcfd08d..478bd28b07 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "KATHrxoL84i7MiVJ", "name": "QIDI PLA Rapido @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "KATHrxoL84i7MiVJ", + "instantiation": "true", "pressure_advance": [ "0.038" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle.json index 2ad1d18a60..f57cabb657 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "YE6WmGAG5Ua6bbap", "name": "QIDI PLA Rapido @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "YE6WmGAG5Ua6bbap", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle.json index ffc9edfb78..ed1b1ef153 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "KPqnbBv0Np93O02u", "name": "QIDI PLA Rapido @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "KPqnbBv0Np93O02u", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @X-Plus 5.json index 6327908055..c8292370bb 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFKIQO2W", "name": "QIDI PLA Rapido@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFKIQO2W", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "45" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle.json index e469cf1fd1..1de6949d00 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "jlUpp5oaYSWwaNn1", "name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Matte@X-Plus 5-Series", + "from": "system", + "setting_id": "jlUpp5oaYSWwaNn1", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle.json index 3f74323770..cf3780c37a 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "E0gYAZUksoFlebuH", "name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Matte@X-Plus 5-Series", + "from": "system", + "setting_id": "E0gYAZUksoFlebuH", + "instantiation": "true", "pressure_advance": [ "0.034" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle.json index f45479c37f..42deb84165 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "juxpaK6EosaHj2ok", "name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Matte@X-Plus 5-Series", + "from": "system", + "setting_id": "juxpaK6EosaHj2ok", + "instantiation": "true", "pressure_advance": [ "0.016" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle.json index 7e4ec99248..e5020c3aa0 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "OlgI3WQA3QLhPsdw", "name": "QIDI PLA Rapido Matte @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Matte@X-Plus 5-Series", + "from": "system", + "setting_id": "OlgI3WQA3QLhPsdw", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @X-Plus 5.json index 9e2380faea..6d66f820ac 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Matte @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF3IKafc", "name": "QIDI PLA Rapido Matte@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF3IKafc", + "instantiation": "false", "additional_cooling_fan_speed": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json index 7506c80541..0a456a70c8 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "t9qUv1IlI5VJ8LoV", "name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "t9qUv1IlI5VJ8LoV", + "instantiation": "true", "filament_max_volumetric_speed": [ "2" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json index e2be1216f3..821ae99c83 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "ARcrUoVsGSM0RB1a", "name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "ARcrUoVsGSM0RB1a", + "instantiation": "true", "pressure_advance": [ "0.038" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json index 2b3fae0a1e..3dc29e0274 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "A23HjUFAyt4GeHAW", "name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "A23HjUFAyt4GeHAW", + "instantiation": "true", "pressure_advance": [ "0.020" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json index e6868b6772..fe0b014127 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "nMpSP1jmsQIUjGPb", "name": "QIDI PLA Rapido Metal @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Rapido Metal@X-Plus 5-Series", + "from": "system", + "setting_id": "nMpSP1jmsQIUjGPb", + "instantiation": "true", "pressure_advance": [ "0.01" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @X-Plus 5.json index bc9f655538..9f94f435be 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Rapido Metal @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFANFm4x", "name": "QIDI PLA Rapido Metal@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFANFm4x", + "instantiation": "false", "filament_type": [ "PLA" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle.json index dfd789a216..32461ff6d1 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "IUU7TApRivYtrrt0", "name": "QIDI PLA Silk @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Silk@X-Plus 5-Series", + "from": "system", + "setting_id": "IUU7TApRivYtrrt0", + "instantiation": "true", "pressure_advance": [ "0.034" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle.json index 286c1d3a36..aa4b899180 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "lx9Dqv6EMmZ0C2SD", "name": "QIDI PLA Silk @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA Silk@X-Plus 5-Series", + "from": "system", + "setting_id": "lx9Dqv6EMmZ0C2SD", + "instantiation": "true", "pressure_advance": [ "0.021" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @X-Plus 5.json index 2b6574b104..81a6411737 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA Silk @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF2TQpOO", "name": "QIDI PLA Silk@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF2TQpOO", + "instantiation": "false", "additional_cooling_fan_speed": [ "100" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle.json index c341f7c71d..9537368024 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "5PocTwpY0SnNzcdc", "name": "QIDI PLA-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "5PocTwpY0SnNzcdc", + "instantiation": "true", "pressure_advance": [ "0.034" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle.json index 5c08e7f67f..2157d07648 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "5NETSLSQlaoR2MYD", "name": "QIDI PLA-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "5NETSLSQlaoR2MYD", + "instantiation": "true", "pressure_advance": [ "0.012" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle.json index 7435222e8b..5dd00e049d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "AUO7iSMEa6GDvM7Y", "name": "QIDI PLA-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PLA-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "AUO7iSMEa6GDvM7Y", + "instantiation": "true", "filament_max_volumetric_speed": [ "18" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @X-Plus 5.json index 390b331556..cf71930b51 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PLA-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFhWrAuP", "name": "QIDI PLA-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFhWrAuP", + "instantiation": "false", "additional_cooling_fan_speed": [ "0" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle.json index 2c2d573713..761944e013 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "FwWut7sJIMbe87XC", "name": "QIDI PPS-CF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PPS-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "FwWut7sJIMbe87XC", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle.json index 9cc0556490..1547ca8bec 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "gDIuKCdgoP59Xc0G", "name": "QIDI PPS-CF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PPS-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "gDIuKCdgoP59Xc0G", + "instantiation": "true", "pressure_advance": [ "0.021" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle.json index 573f8e17f8..512bc7617e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "D29sGCB9OI4cTn0S", "name": "QIDI PPS-CF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PPS-CF@X-Plus 5-Series", + "from": "system", + "setting_id": "D29sGCB9OI4cTn0S", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @X-Plus 5.json index b482042819..c70f3c26b2 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-CF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFZOuWrO", "name": "QIDI PPS-CF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFZOuWrO", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle.json index de96ad5f7a..5e6446b802 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "5C6dIIgQOt4NiTu0", "name": "QIDI PPS-GF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PPS-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "5C6dIIgQOt4NiTu0", + "instantiation": "true", "pressure_advance": [ "0.03" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle.json index 470839ef59..e88688b456 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "aSd6UW4Mrlxpa15E", "name": "QIDI PPS-GF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PPS-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "aSd6UW4Mrlxpa15E", + "instantiation": "true", "pressure_advance": [ "0.021" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle.json index 6cc49dbd68..277492f8e4 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "7JC2zAUgtGu5zSGo", "name": "QIDI PPS-GF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI PPS-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "7JC2zAUgtGu5zSGo", + "instantiation": "true", "pressure_advance": [ "0.008" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json index f973121e62..61d4c6a502 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI PPS-GF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFp57RRC", "name": "QIDI PPS-GF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFp57RRC", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle.json index 5bd3b85fb9..44e8e0df5d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "oMvDD9rKJGcezwpq", "name": "QIDI Support For PAHT @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI Support For PAHT@X-Plus 5-Series", + "from": "system", + "setting_id": "oMvDD9rKJGcezwpq", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle.json index 37f474533e..e37712ead6 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "6BhbbuUP6HCVScDd", "name": "QIDI Support For PAHT @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI Support For PAHT@X-Plus 5-Series", + "from": "system", + "setting_id": "6BhbbuUP6HCVScDd", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle.json index f28e56c5b1..a568d0cd8a 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "kA4fvvj6xZEhArXv", "name": "QIDI Support For PAHT @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI Support For PAHT@X-Plus 5-Series", + "from": "system", + "setting_id": "kA4fvvj6xZEhArXv", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.8 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @X-Plus 5.json index 63941c851b..5484c472f5 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PAHT @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFXn3Vd9", "name": "QIDI Support For PAHT@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFXn3Vd9", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.4 nozzle.json index 615d9af041..99cc873ddf 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "0xy82KbAJD5uBara", "name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI Support For PET/PA@X-Plus 5-Series", + "from": "system", + "setting_id": "0xy82KbAJD5uBara", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.6 nozzle.json index 1e0c81424c..e8c4526fc7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "2oCGYFdC4dfpNUw4", "name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI Support For PET/PA@X-Plus 5-Series", + "from": "system", + "setting_id": "2oCGYFdC4dfpNUw4", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.8 nozzle.json index 2d47d18707..9e9160a2b5 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "hFYahJkYIgmjcuPb", "name": "QIDI Support For PET/PA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI Support For PET/PA@X-Plus 5-Series", + "from": "system", + "setting_id": "hFYahJkYIgmjcuPb", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.8 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @X-Plus 5.json index 969fc2bccc..34d1baa32f 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI Support For PET-PA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFqcL5UF", "name": "QIDI Support For PET/PA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFqcL5UF", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle.json index 1f2db1eb25..6be778053d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "ygLg4KVojo7YoG5K", "name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU 95A-HF@X-Plus 5-Series", + "from": "system", + "setting_id": "ygLg4KVojo7YoG5K", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle.json index 94e992d0e9..30e5899f0b 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "K98nPXclatc5HnIx", "name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU 95A-HF@X-Plus 5-Series", + "from": "system", + "setting_id": "K98nPXclatc5HnIx", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle.json index e05faeed65..2f41c696dc 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "pTxBir6QC9KhWrLU", "name": "QIDI TPU 95A-HF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU 95A-HF@X-Plus 5-Series", + "from": "system", + "setting_id": "pTxBir6QC9KhWrLU", + "instantiation": "true", "nozzle_temperature": [ "220" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @X-Plus 5.json index 7b06c92253..c7a7ed62cd 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU 95A-HF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFR1XLMN", "name": "QIDI TPU 95A-HF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFR1XLMN", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "30" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle.json index 592ad5a51c..17ca5e5a60 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "KIIwoI87n5MkT83b", "name": "QIDI TPU-Aero @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU-Aero@X-Plus 5-Series", + "from": "system", + "setting_id": "KIIwoI87n5MkT83b", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle.json index f18b67f608..03b11ef242 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "eUNygrv7weqgX7e0", "name": "QIDI TPU-Aero @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU-Aero@X-Plus 5-Series", + "from": "system", + "setting_id": "eUNygrv7weqgX7e0", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @X-Plus 5.json index 4ede2d7d6e..fd8964a9f9 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU-Aero @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFMDHOcT", "name": "QIDI TPU-Aero@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFMDHOcT", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "30" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle.json index 8e88b23151..8857639b58 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "AtsowCGhOIw4GeRJ", "name": "QIDI TPU-GF @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "AtsowCGhOIw4GeRJ", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle.json index 5a7687b51c..d5a590bf3e 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "wqk4I1KaRyLEm12W", "name": "QIDI TPU-GF @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "wqk4I1KaRyLEm12W", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle.json index 2fe800d6ab..4349ea9820 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "o2JjRsoi03ST3Wh2", "name": "QIDI TPU-GF @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI TPU-GF@X-Plus 5-Series", + "from": "system", + "setting_id": "o2JjRsoi03ST3Wh2", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.8 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @X-Plus 5.json index 90de30cb02..d4a4e6cd55 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI TPU-GF @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF9EHUKK", "name": "QIDI TPU-GF@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF9EHUKK", + "instantiation": "false", "cool_plate_temp_initial_layer": [ "30" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle.json index ae7b99531e..b924628294 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "RzZGtHGu2xKASwwu", "name": "QIDI UltraPA @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI UltraPA@X-Plus 5-Series", + "from": "system", + "setting_id": "RzZGtHGu2xKASwwu", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle.json index e9bfbe4362..7f2e0c6f76 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "0seF33ojhYF6lNM4", "name": "QIDI UltraPA @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI UltraPA@X-Plus 5-Series", + "from": "system", + "setting_id": "0seF33ojhYF6lNM4", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.6 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle.json index 6f03ff7b5a..c2441fd612 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "vfr7Lv94OHi4KOCw", "name": "QIDI UltraPA @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI UltraPA@X-Plus 5-Series", + "from": "system", + "setting_id": "vfr7Lv94OHi4KOCw", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.8 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @X-Plus 5.json index 75a89479e2..84bcd1025d 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFWDe7YH", "name": "QIDI UltraPA@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFWDe7YH", + "instantiation": "false", "box_temperature_range_high": [ "55" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle.json index c88635f447..5988080581 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "8h1ITuLzHYf0J4NA", "name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI UltraPA-CF25@X-Plus 5-Series", + "from": "system", + "setting_id": "8h1ITuLzHYf0J4NA", + "instantiation": "true", "compatible_printers": [ "Qidi X-Plus 5 0.4 nozzle" ] diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle.json index 66ac797bb8..c36fea25b1 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "WK63qDyLkG4fznPW", "name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI UltraPA-CF25@X-Plus 5-Series", + "from": "system", + "setting_id": "WK63qDyLkG4fznPW", + "instantiation": "true", "pressure_advance": [ "0.022" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle.json index 282fed912a..4e729f5d62 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "53sirpAAiDOx0c8P", "name": "QIDI UltraPA-CF25 @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI UltraPA-CF25@X-Plus 5-Series", + "from": "system", + "setting_id": "53sirpAAiDOx0c8P", + "instantiation": "true", "pressure_advance": [ "0.02" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json index 82c261fbd5..9e8518cacb 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI UltraPA-CF25 @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OF9PELEb", "name": "QIDI UltraPA-CF25@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OF9PELEb", + "instantiation": "false", "box_temperature_range_high": [ "65" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle.json index 2232226b78..eafa4d90e7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "gIumq0YfeZrNDTZt", "name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI WOOD Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "gIumq0YfeZrNDTZt", + "instantiation": "true", "pressure_advance": [ "0.044" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle.json index b9ecf201ba..2067b842b7 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "qUjZ8AUjivOk8uCf", "name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI WOOD Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "qUjZ8AUjivOk8uCf", + "instantiation": "true", "pressure_advance": [ "0.024" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle.json index fc15698443..6cd6d5e192 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "filament", - "setting_id": "A2kztfG9PA7Qxh7r", "name": "QIDI WOOD Rapido @Qidi X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "QIDI WOOD Rapido@X-Plus 5-Series", + "from": "system", + "setting_id": "A2kztfG9PA7Qxh7r", + "instantiation": "true", "pressure_advance": [ "0.012" ], diff --git a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @X-Plus 5.json b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @X-Plus 5.json index efbe41d51d..280d05e09c 100644 --- a/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @X-Plus 5.json +++ b/resources/profiles/Qidi/filament/X5/QIDI WOOD Rapido @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "filament", - "filament_id": "OFvdZ2bx", "name": "QIDI WOOD Rapido@X-Plus 5-Series", - "from": "system", - "instantiation": "false", "inherits": "fdm_filament_x5_common", + "from": "system", + "filament_id": "OFvdZ2bx", + "instantiation": "false", "additional_cooling_fan_speed": [ "100" ], diff --git a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json index a085ce6cfe..bd2398ae7a 100644 --- a/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi Q1 Pro 0.4 nozzle.json @@ -63,15 +63,19 @@ "112x112" ], "machine_max_jerk_e": [ + "2", "2" ], "machine_max_jerk_x": [ + "8", "8" ], "machine_max_jerk_y": [ + "8", "8" ], "machine_max_jerk_z": [ + "3", "3" ], "extruder_clearance_radius": "70", diff --git a/resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json index 6a0a91b2ac..623bbf841d 100644 --- a/resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi Q2 0.4 nozzle.json @@ -33,18 +33,23 @@ "machine_end_gcode": "DISABLE_BOX_HEATER\nM141 S0\nM140 S0\nBUFFER_MONITORING ENABLE=0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y270 F12000\nG0 X90 Y270 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0", "machine_load_filament_time": "35", "machine_max_jerk_e": [ + "4", "4" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "4", "4" ], "machine_max_speed_z": [ + "20", "20" ], "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Qidi/machine/Qidi Q2C 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi Q2C 0.4 nozzle.json index 9d4683885f..84f3e8700a 100644 --- a/resources/profiles/Qidi/machine/Qidi Q2C 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi Q2C 0.4 nozzle.json @@ -33,18 +33,23 @@ "machine_end_gcode": "DISABLE_BOX_HEATER\nM140 S0\nBUFFER_MONITORING ENABLE=0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y270 F12000\nG0 X90 Y270 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0", "machine_load_filament_time": "35", "machine_max_jerk_e": [ + "4", "4" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "4", "4" ], "machine_max_speed_z": [ + "20", "20" ], "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Qidi/machine/Qidi X-Max 4 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Max 4 0.4 nozzle.json index ef26c0a620..f7cda2a1cd 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Max 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Max 4 0.4 nozzle.json @@ -30,31 +30,40 @@ "layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\nMOVE_TO_TRASH\n{if layer_z <=25}\nG1 Z25\n{endif}\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 E[retraction_length] F300\nG1 X180 F8000\nG1 Y380\n{if layer_z <=25}\nG1 Z[layer_z]\n{endif}\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}", "machine_end_gcode": "SET_PRINT_MAIN_STATUS MAIN_STATUS=print_end\nDISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y380 F12000\nG0 X128 Y380 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0\nPRINT_END", "machine_max_jerk_e": [ + "4", "4" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "4", "4" ], "machine_max_speed_z": [ + "20", "20" ], "machine_pause_gcode": "PAUSE", "machine_max_acceleration_x": [ + "30000", "30000" ], "machine_max_acceleration_y": [ + "30000", "30000" ], "machine_max_speed_x": [ + "800", "800" ], "machine_max_speed_y": [ + "800", "800" ], "machine_start_gcode": ";===== PRINT_PHASE_INIT =====\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\nSET_PRINT_MAIN_STATUS MAIN_STATUS=print_start\nM220 S100\nM221 S100\nDISABLE_ALL_SENSOR\nM1002 R1\nM107\nCLEAR_PAUSE\nM140 S[bed_temperature_initial_layer_single]\nM141 S[chamber_temperature]\nG29.0\nSET_PRINT_SUB_STATUS SUB_STATUS=tool_head_reset\nG28\n\n;===== BOX_PREPAR =====\nSET_PRINT_SUB_STATUS SUB_STATUS=change_filament\nBOX_PRINT_START EXTRUDER=[initial_no_support_extruder] HOTENDTEMP={nozzle_temperature_range_high[initial_tool]}\nM400\nEXTRUSION_AND_FLUSH HOTEND=[nozzle_temperature_initial_layer]\n\n;===== CLEAR_NOZZLE =====\nSET_PRINT_SUB_STATUS SUB_STATUS=flush_filament\nG1 Z20 F480\nMOVE_TO_TRASH\nG1 Y403.5 F2000\n{if chamber_temperature[0] == 0}\nM106 P3 S[during_print_exhaust_fan_speed]\n{else}\nM106 P3 S0\n{endif}\nM1004\nM106 S0\nM109 S[nozzle_temperature_initial_layer]\nG92 E0\nM83\nG1 E5 F80\nG1 E250 F300\nM400\nM106 S255\nG1 E-3 F1000\nM104 S140\nSET_PRINT_SUB_STATUS SUB_STATUS=clear_nozzle\nM109.1 S{nozzle_temperature_initial_layer[0]-30}\nM204 S10000\nG1 Y403 F2000\nG1 X163 F8000\nG1 X145 F5000\nG1 X163 F8000\nG1 X145 F5000\nG1 X175 F6000\nG1 X163\nG1 X175\nG1 X163\nG1 X175\nG1 X163\nG1 X180 F10000\nG1 Y395 F6000\nG1 X188\nG1 Z-0.2 F480\nM106 S255\nM109.1 S150\nG91\nG1 X15 F200\nG1 Y2\nG1 X-15\nG1 Y-2\nG1 X15\nG90\nG2 I0.5 J0.5 F480\nG2 I0.5 J0.5\nG2 I0.5 J0.5\nG1 Z10\nG1 Y383 F12000\nG1 X116\nG1 Y403\nG1 X163 F8000\nG1 X145 F5000\nG1 X163 F8000\nG1 X145 F5000\nG1 X175 F6000\nG1 X163\nG1 X175\nG1 X163\nG1 X175\nG1 X163\nG1 X180 F10000\nG1 X195 Y195\nM106 S0\nSET_PRINT_SUB_STATUS SUB_STATUS=wait_bed_temp\nM190 S[bed_temperature_initial_layer_single]\nSET_PRINT_SUB_STATUS SUB_STATUS=wait_chamber_temp\nM191 S[chamber_temperature]\nG1 Y0 F15000\nG1 X15\nG1 X3 F5000\nG4 P1000\nG1 X4 F1000\nG1 X3 F5000\nG4 P1000\nG1 E-4 F1800\nG1 X15 F3000\nG1 X20 Y20 F15000\nSET_PRINT_SUB_STATUS SUB_STATUS=z_tilt_adjust\nZ_TILT_ADJUST\nSET_PRINT_SUB_STATUS SUB_STATUS=auto_bed_adjust\nG29\nM1002 A1\nG1 X195 Y195 Z10 F20000\nG92_ Z{10 - ((nozzle_temperature_initial_layer[initial_tool] - 130) / 14 - 5.0) / 100}\nG0 Y1\nM109 S[nozzle_temperature_initial_layer]\nENABLE_ALL_SENSOR\n\n;===== PRINT_START =====\n; LAYER_HEIGHT: 0.2\nT[initial_tool]\nM140 S[bed_temperature_initial_layer_single]\nM104 S[nozzle_temperature_initial_layer]\nM141 S[chamber_temperature]\nG4 P3000\nprobe samples=1\nG91\nG0 Z0.6 F480\nG90\nG1 X175 Y1 F20000\nG1 E5 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\nG1 X215 E20 F{filament_max_volumetric_speed[initial_no_support_extruder]/2/2.4053*60}\nG1 Z1 F480\nSET_PRINT_MAIN_STATUS MAIN_STATUS=printing", diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json index a7d2f09195..21c4b29044 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 4 0.4 nozzle.json @@ -68,21 +68,27 @@ "96x96" ], "machine_max_jerk_e": [ + "4", "4" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "4", "4" ], "machine_max_acceleration_retracting": [ + "20000", "20000" ], "machine_max_speed_z": [ + "20", "20" ], "retract_lift_below": [ diff --git a/resources/profiles/Qidi/machine/Qidi X-Plus 5 0.4 nozzle.json b/resources/profiles/Qidi/machine/Qidi X-Plus 5 0.4 nozzle.json index f23f86af2a..7ee84157f8 100644 --- a/resources/profiles/Qidi/machine/Qidi X-Plus 5 0.4 nozzle.json +++ b/resources/profiles/Qidi/machine/Qidi X-Plus 5 0.4 nozzle.json @@ -32,30 +32,39 @@ "layer_change_gcode": "{if timelapse_type == 1} ; timelapse with wipe tower\nG92 E0\nG1 E-[retraction_length] F1800\n{if layer_z + 0.4 > max_print_height}\nG2 Z{max_print_height} I0.86 J0.86 P1 F20000 ; spiral lift a little\n{else}\nG2 Z{layer_z + 0.4} I0.86 J0.86 P1 F20000 ; spiral lift a little\n{endif}\nMOVE_TO_TRASH\n{if layer_z <=25}\nG1 Z25\n{endif}\nG92 E0\nM400\nTIMELAPSE_TAKE_FRAME\nG1 E[retraction_length] F300\nG1 X140 F8000\nG1 Y319\n{if layer_z <=25}\nG1 Z[layer_z]\n{endif}\n{elsif timelapse_type == 0} ; timelapse without wipe tower\nTIMELAPSE_TAKE_FRAME\n{endif}\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER={layer_num + 1}", "machine_end_gcode": "SET_PRINT_MAIN_STATUS MAIN_STATUS=print_end\nDISABLE_BOX_HEATER\nM141 S0\nM140 S0\nDISABLE_ALL_SENSOR\nG1 E-3 F1800\n{if max_layer_z + 3 > max_print_height}\nG0 Z{max_print_height} F600\n{else}\nG0 Z{max_layer_z + 3} F600\n{endif}\nUNLOAD_FILAMENT T=[current_extruder]\nG0 Y320 F12000\nG0 X105 Y320 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}\nM104 S0\nPRINT_END", "machine_max_acceleration_x": [ + "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", "20000" ], "machine_max_jerk_e": [ + "4", "4" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "4", "4" ], "machine_max_speed_x": [ + "600", "600" ], "machine_max_speed_y": [ + "600", "600" ], "machine_max_speed_z": [ + "20", "20" ], "machine_pause_gcode": "PAUSE", diff --git a/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5 0.2 nozzle.json index 6ef2deee1a..290b2a8785 100644 --- a/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ojwggKwtZ95dDdGn", "name": "0.08mm High Quality @X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "ojwggKwtZ95dDdGn", + "instantiation": "true", "bottom_color_penetration_layers": "5", "bottom_shell_layers": "5", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5.json b/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5.json index 5b76c79ef4..3ffa85deba 100644 --- a/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5.json +++ b/resources/profiles/Qidi/process/0.08mm High Quality @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "pdbmnAHtrlkeD1D6", "name": "0.08mm High Quality @X-Plus 5", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "pdbmnAHtrlkeD1D6", + "instantiation": "true", "bottom_color_penetration_layers": "7", "bottom_shell_layers": "7", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.10mm Standard @X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/process/0.10mm Standard @X-Plus 5 0.2 nozzle.json index a8a9aa5f37..79c6ac4712 100644 --- a/resources/profiles/Qidi/process/0.10mm Standard @X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/process/0.10mm Standard @X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "3k8N3voNC9Kp0Ov6", "name": "0.10mm Standard @X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "3k8N3voNC9Kp0Ov6", + "instantiation": "true", "bottom_color_penetration_layers": "5", "bottom_shell_layers": "5", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Plus 5 0.2 nozzle.json b/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Plus 5 0.2 nozzle.json index 1c1d304ccd..5dc8f6532b 100644 --- a/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Plus 5 0.2 nozzle.json +++ b/resources/profiles/Qidi/process/0.12mm Balanced Quality @X-Plus 5 0.2 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "O20HfmdyTRg2xayA", "name": "0.12mm Balanced Quality @X-Plus 5 0.2 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "O20HfmdyTRg2xayA", + "instantiation": "true", "bottom_color_penetration_layers": "5", "bottom_shell_layers": "5", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.12mm High Quality @X-Plus 5.json b/resources/profiles/Qidi/process/0.12mm High Quality @X-Plus 5.json index a74aecb369..d2b490a4b1 100644 --- a/resources/profiles/Qidi/process/0.12mm High Quality @X-Plus 5.json +++ b/resources/profiles/Qidi/process/0.12mm High Quality @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "xWoxLO8XiKAOEvPO", "name": "0.12mm High Quality @X-Plus 5", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "xWoxLO8XiKAOEvPO", + "instantiation": "true", "bottom_color_penetration_layers": "5", "bottom_shell_layers": "5", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.16mm High Quality @X-Plus 5.json b/resources/profiles/Qidi/process/0.16mm High Quality @X-Plus 5.json index 54f20f7324..7d0d689ddb 100644 --- a/resources/profiles/Qidi/process/0.16mm High Quality @X-Plus 5.json +++ b/resources/profiles/Qidi/process/0.16mm High Quality @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "7hYw7osV25Xu2yiu", "name": "0.16mm High Quality @X-Plus 5", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "7hYw7osV25Xu2yiu", + "instantiation": "true", "bottom_color_penetration_layers": "4", "bottom_shell_layers": "4", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.16mm Standard @X-Plus 5.json b/resources/profiles/Qidi/process/0.16mm Standard @X-Plus 5.json index 5399e693aa..1501ed2daf 100644 --- a/resources/profiles/Qidi/process/0.16mm Standard @X-Plus 5.json +++ b/resources/profiles/Qidi/process/0.16mm Standard @X-Plus 5.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "xP7mco0WGscmPNoV", "name": "0.16mm Standard @X-Plus 5", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "xP7mco0WGscmPNoV", + "instantiation": "true", "bottom_color_penetration_layers": "4", "bottom_shell_layers": "4", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Plus 5 0.6 nozzle.json index 85d94d49a7..50c7af3c16 100644 --- a/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/process/0.18mm Balanced Quality @X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "kj7YrKOrYowWXXrY", "name": "0.18mm Balanced Quality @X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "kj7YrKOrYowWXXrY", + "instantiation": "true", "bridge_flow": "1", "bridge_speed": [ "30" diff --git a/resources/profiles/Qidi/process/0.20mm High Quality @X-Plus 5.json b/resources/profiles/Qidi/process/0.20mm High Quality @X-Plus 5.json index 4f8c7b4ef4..5fdcac42e1 100644 --- a/resources/profiles/Qidi/process/0.20mm High Quality @X-Plus 5.json +++ b/resources/profiles/Qidi/process/0.20mm High Quality @X-Plus 5.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "azERQAEOdeNEo2z7", "name": "0.20mm High Quality @X-Plus 5", - "from": "system", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "azERQAEOdeNEo2z7", "instantiation": "true", "bottom_shell_layers": "3", "bridge_flow": "1", diff --git a/resources/profiles/Qidi/process/0.20mm Standard @X-Plus 5.json b/resources/profiles/Qidi/process/0.20mm Standard @X-Plus 5.json index decaceecae..49a75ca11b 100644 --- a/resources/profiles/Qidi/process/0.20mm Standard @X-Plus 5.json +++ b/resources/profiles/Qidi/process/0.20mm Standard @X-Plus 5.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "ug7kxxCLKKE7MoJW", "name": "0.20mm Standard @X-Plus 5", - "from": "system", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "ug7kxxCLKKE7MoJW", "instantiation": "true", "bridge_flow": "1", "default_acceleration": [ diff --git a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.6 nozzle.json index 16e25dcef3..bdccab0dbb 100644 --- a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "BWwslzDWus0iHZM8", "name": "0.24mm Balanced Quality @X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "BWwslzDWus0iHZM8", + "instantiation": "true", "bridge_flow": "1", "bridge_speed": [ "30" diff --git a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.8 nozzle.json index e7d69b3f09..65649a82e2 100644 --- a/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/process/0.24mm Balanced Quality @X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "TdXf6dJK5dAiFtIW", "name": "0.24mm Balanced Quality @X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "TdXf6dJK5dAiFtIW", + "instantiation": "true", "bridge_flow": "1", "bridge_speed": [ "30" diff --git a/resources/profiles/Qidi/process/0.24mm Standard @X-Plus 5.json b/resources/profiles/Qidi/process/0.24mm Standard @X-Plus 5.json index 8a435e69e7..952d161781 100644 --- a/resources/profiles/Qidi/process/0.24mm Standard @X-Plus 5.json +++ b/resources/profiles/Qidi/process/0.24mm Standard @X-Plus 5.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "fiMTwk6ObF3WNpi5", "name": "0.24mm Standard @X-Plus 5", - "from": "system", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "fiMTwk6ObF3WNpi5", "instantiation": "true", "bridge_flow": "1", "default_acceleration": [ diff --git a/resources/profiles/Qidi/process/0.30mm Standard @X-Plus 5 0.6 nozzle.json b/resources/profiles/Qidi/process/0.30mm Standard @X-Plus 5 0.6 nozzle.json index a297f33bac..5024f95495 100644 --- a/resources/profiles/Qidi/process/0.30mm Standard @X-Plus 5 0.6 nozzle.json +++ b/resources/profiles/Qidi/process/0.30mm Standard @X-Plus 5 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ZHUAMUGv0HI3h8fQ", "name": "0.30mm Standard @X-Plus 5 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "ZHUAMUGv0HI3h8fQ", + "instantiation": "true", "bridge_flow": "1", "bridge_speed": [ "30" diff --git a/resources/profiles/Qidi/process/0.32mm Balanced Quality @X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/process/0.32mm Balanced Quality @X-Plus 5 0.8 nozzle.json index be02d140d6..d063b5a735 100644 --- a/resources/profiles/Qidi/process/0.32mm Balanced Quality @X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/process/0.32mm Balanced Quality @X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "Vl4hMKR69J1JcquX", "name": "0.32mm Balanced Quality @X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "Vl4hMKR69J1JcquX", + "instantiation": "true", "bridge_flow": "1", "bridge_speed": [ "30" diff --git a/resources/profiles/Qidi/process/0.40mm Standard @X-Plus 5 0.8 nozzle.json b/resources/profiles/Qidi/process/0.40mm Standard @X-Plus 5 0.8 nozzle.json index cb3f30c20e..343fdc744b 100644 --- a/resources/profiles/Qidi/process/0.40mm Standard @X-Plus 5 0.8 nozzle.json +++ b/resources/profiles/Qidi/process/0.40mm Standard @X-Plus 5 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "6EBzl1Pg5Px36Cu6", "name": "0.40mm Standard @X-Plus 5 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_n_common", + "from": "system", + "setting_id": "6EBzl1Pg5Px36Cu6", + "instantiation": "true", "bridge_flow": "1", "bridge_speed": [ "30" diff --git a/resources/profiles/Qidi/qidi_xplus5_buildplate_model.stl b/resources/profiles/Qidi/qidi_xplus5_buildplate_model.stl index 5e2d7ca485..efc28709cb 100644 Binary files a/resources/profiles/Qidi/qidi_xplus5_buildplate_model.stl and b/resources/profiles/Qidi/qidi_xplus5_buildplate_model.stl differ diff --git a/resources/profiles/Qidi/qidi_xplus5_buildplate_texture.svg b/resources/profiles/Qidi/qidi_xplus5_buildplate_texture.svg index 72a081620f..1edb2c3900 100644 --- a/resources/profiles/Qidi/qidi_xplus5_buildplate_texture.svg +++ b/resources/profiles/Qidi/qidi_xplus5_buildplate_texture.svg @@ -1 +1 @@ - \ No newline at end of file + \ No newline at end of file diff --git a/resources/profiles/RH3D.json b/resources/profiles/RH3D.json index 3e177c5efd..09b413845f 100644 --- a/resources/profiles/RH3D.json +++ b/resources/profiles/RH3D.json @@ -1,6 +1,6 @@ { "name": "RH3D", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "RH3D - printer profiles", "machine_model_list": [ diff --git a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.2 nozzle.json b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.2 nozzle.json index cc2c23cfd2..0a5e6fc99a 100644 --- a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.2 nozzle.json +++ b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.2 nozzle.json @@ -1,14 +1,14 @@ -{ - "type": "machine", - "name": "E3NG v1.2S - 0.2 nozzle", - "printer_model": "E3NG v1.2S", - "inherits": "fdm_common_E3NG v1.2S", - "from": "system", - "setting_id": "gPm0noz1896R4GyO", - "instantiation": "true", - "default_print_profile": "0.10mm Standard @E3NG v1.2S", - "nozzle_diameter": [ - "0.2" - ], - "printer_variant": "0.2" -} +{ + "type": "machine", + "name": "E3NG v1.2S - 0.2 nozzle", + "inherits": "fdm_common_E3NG v1.2S", + "from": "system", + "setting_id": "gPm0noz1896R4GyO", + "instantiation": "true", + "printer_model": "E3NG v1.2S", + "default_print_profile": "0.10mm Standard @E3NG v1.2S", + "nozzle_diameter": [ + "0.2" + ], + "printer_variant": "0.2" +} diff --git a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.3 nozzle.json b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.3 nozzle.json index 7c3e5e837f..0feb4065cb 100644 --- a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.3 nozzle.json +++ b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.3 nozzle.json @@ -1,14 +1,14 @@ -{ - "type": "machine", - "name": "E3NG v1.2S - 0.3 nozzle", - "printer_model": "E3NG v1.2S", - "inherits": "fdm_common_E3NG v1.2S", - "from": "system", - "setting_id": "UQ67wIWTbJiUiPoy", - "instantiation": "true", - "default_print_profile": "0.15mm Standard @E3NG v1.2S", - "nozzle_diameter": [ - "0.3" - ], - "printer_variant": "0.3" -} +{ + "type": "machine", + "name": "E3NG v1.2S - 0.3 nozzle", + "inherits": "fdm_common_E3NG v1.2S", + "from": "system", + "setting_id": "UQ67wIWTbJiUiPoy", + "instantiation": "true", + "printer_model": "E3NG v1.2S", + "default_print_profile": "0.15mm Standard @E3NG v1.2S", + "nozzle_diameter": [ + "0.3" + ], + "printer_variant": "0.3" +} diff --git a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.4 nozzle.json b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.4 nozzle.json index a0ee4cae85..d199950c27 100644 --- a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.4 nozzle.json +++ b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.4 nozzle.json @@ -1,14 +1,14 @@ -{ - "type": "machine", - "name": "E3NG v1.2S - 0.4 nozzle", - "printer_model": "E3NG v1.2S", - "inherits": "fdm_common_E3NG v1.2S", - "from": "system", - "setting_id": "Ngr03MsSBAkmFnld", - "instantiation": "true", - "default_print_profile": "0.20mm Standard @E3NG v1.2S", - "nozzle_diameter": [ - "0.4" - ], - "printer_variant": "0.4" -} +{ + "type": "machine", + "name": "E3NG v1.2S - 0.4 nozzle", + "inherits": "fdm_common_E3NG v1.2S", + "from": "system", + "setting_id": "Ngr03MsSBAkmFnld", + "instantiation": "true", + "printer_model": "E3NG v1.2S", + "default_print_profile": "0.20mm Standard @E3NG v1.2S", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4" +} diff --git a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.5 nozzle.json b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.5 nozzle.json index 12131e5f84..0d1491ef32 100644 --- a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.5 nozzle.json +++ b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.5 nozzle.json @@ -1,14 +1,14 @@ -{ - "type": "machine", - "name": "E3NG v1.2S - 0.5 nozzle", - "printer_model": "E3NG v1.2S", - "inherits": "fdm_common_E3NG v1.2S", - "from": "system", - "setting_id": "GSUiav9EILSf8XF4", - "instantiation": "true", - "default_print_profile": "0.20mm Standard @E3NG v1.2S", - "nozzle_diameter": [ - "0.5" - ], - "printer_variant": "0.5" -} +{ + "type": "machine", + "name": "E3NG v1.2S - 0.5 nozzle", + "inherits": "fdm_common_E3NG v1.2S", + "from": "system", + "setting_id": "GSUiav9EILSf8XF4", + "instantiation": "true", + "printer_model": "E3NG v1.2S", + "default_print_profile": "0.20mm Standard @E3NG v1.2S", + "nozzle_diameter": [ + "0.5" + ], + "printer_variant": "0.5" +} diff --git a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.6 nozzle.json b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.6 nozzle.json index c8288a67bf..a04ef63e45 100644 --- a/resources/profiles/RH3D/machine/E3NG v1.2S - 0.6 nozzle.json +++ b/resources/profiles/RH3D/machine/E3NG v1.2S - 0.6 nozzle.json @@ -1,14 +1,14 @@ -{ - "type": "machine", - "name": "E3NG v1.2S - 0.6 nozzle", - "printer_model": "E3NG v1.2S", - "inherits": "fdm_common_E3NG v1.2S", - "from": "system", - "setting_id": "jVNTcmQwQIwJMfFd", - "instantiation": "true", - "default_print_profile": "0.25mm Standard @E3NG v1.2S", - "nozzle_diameter": [ - "0.6" - ], - "printer_variant": "0.6" -} +{ + "type": "machine", + "name": "E3NG v1.2S - 0.6 nozzle", + "inherits": "fdm_common_E3NG v1.2S", + "from": "system", + "setting_id": "jVNTcmQwQIwJMfFd", + "instantiation": "true", + "printer_model": "E3NG v1.2S", + "default_print_profile": "0.25mm Standard @E3NG v1.2S", + "nozzle_diameter": [ + "0.6" + ], + "printer_variant": "0.6" +} diff --git a/resources/profiles/RH3D/machine/VIRTU E3 - 0.2 nozzle.json b/resources/profiles/RH3D/machine/VIRTU E3 - 0.2 nozzle.json index 8814f25e0c..516ad310e1 100644 --- a/resources/profiles/RH3D/machine/VIRTU E3 - 0.2 nozzle.json +++ b/resources/profiles/RH3D/machine/VIRTU E3 - 0.2 nozzle.json @@ -1,11 +1,11 @@ { "type": "machine", "name": "VIRTU E3 - 0.2 nozzle", - "printer_model": "VIRTU E3", "inherits": "fdm_common_VIRTU E3", "from": "system", "setting_id": "NEqwtUJ9txtcf1vY", "instantiation": "true", + "printer_model": "VIRTU E3", "default_print_profile": "0.10mm Standard @VIRTU E3", "nozzle_diameter": [ "0.2" diff --git a/resources/profiles/RH3D/machine/VIRTU E3 - 0.3 nozzle.json b/resources/profiles/RH3D/machine/VIRTU E3 - 0.3 nozzle.json index 4c27b80bb8..1a9a5dfe55 100644 --- a/resources/profiles/RH3D/machine/VIRTU E3 - 0.3 nozzle.json +++ b/resources/profiles/RH3D/machine/VIRTU E3 - 0.3 nozzle.json @@ -1,11 +1,11 @@ { "type": "machine", "name": "VIRTU E3 - 0.3 nozzle", - "printer_model": "VIRTU E3", "inherits": "fdm_common_VIRTU E3", "from": "system", "setting_id": "3PjlEiZxmdLJjoGw", "instantiation": "true", + "printer_model": "VIRTU E3", "default_print_profile": "0.15mm Standard @VIRTU E3", "nozzle_diameter": [ "0.3" diff --git a/resources/profiles/RH3D/machine/VIRTU E3 - 0.4 nozzle.json b/resources/profiles/RH3D/machine/VIRTU E3 - 0.4 nozzle.json index 7b02993a2b..2f78ffc1ca 100644 --- a/resources/profiles/RH3D/machine/VIRTU E3 - 0.4 nozzle.json +++ b/resources/profiles/RH3D/machine/VIRTU E3 - 0.4 nozzle.json @@ -1,11 +1,11 @@ { "type": "machine", "name": "VIRTU E3 - 0.4 nozzle", - "printer_model": "VIRTU E3", "inherits": "fdm_common_VIRTU E3", "from": "system", "setting_id": "mYCTx4ovF6z0STDL", "instantiation": "true", + "printer_model": "VIRTU E3", "default_print_profile": "0.20mm Standard @VIRTU E3", "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/RH3D/machine/VIRTU E3 - 0.5 nozzle.json b/resources/profiles/RH3D/machine/VIRTU E3 - 0.5 nozzle.json index 660dd35305..e8b64a12b3 100644 --- a/resources/profiles/RH3D/machine/VIRTU E3 - 0.5 nozzle.json +++ b/resources/profiles/RH3D/machine/VIRTU E3 - 0.5 nozzle.json @@ -1,11 +1,11 @@ { "type": "machine", "name": "VIRTU E3 - 0.5 nozzle", - "printer_model": "VIRTU E3", "inherits": "fdm_common_VIRTU E3", "from": "system", "setting_id": "iMnENFt2zw6UTcbM", "instantiation": "true", + "printer_model": "VIRTU E3", "default_print_profile": "0.20mm Standard @VIRTU E3", "nozzle_diameter": [ "0.5" diff --git a/resources/profiles/RH3D/machine/VIRTU E3 - 0.6 nozzle.json b/resources/profiles/RH3D/machine/VIRTU E3 - 0.6 nozzle.json index bce4e91736..8963f1b68a 100644 --- a/resources/profiles/RH3D/machine/VIRTU E3 - 0.6 nozzle.json +++ b/resources/profiles/RH3D/machine/VIRTU E3 - 0.6 nozzle.json @@ -1,11 +1,11 @@ { "type": "machine", "name": "VIRTU E3 - 0.6 nozzle", - "printer_model": "VIRTU E3", "inherits": "fdm_common_VIRTU E3", "from": "system", "setting_id": "T1RuDWhyFkI1GH1h", "instantiation": "true", + "printer_model": "VIRTU E3", "default_print_profile": "0.25mm Standard @VIRTU E3", "nozzle_diameter": [ "0.6" diff --git a/resources/profiles/Raise3D.json b/resources/profiles/Raise3D.json index 5f98b967d4..740c9c33e6 100644 --- a/resources/profiles/Raise3D.json +++ b/resources/profiles/Raise3D.json @@ -1,7 +1,7 @@ { "name": "Raise3D", "url": "", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "Raise3D configurations", "machine_model_list": [ diff --git a/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Dual).json b/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Dual).json index 660abd55d4..73d4a4344e 100644 --- a/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Dual).json +++ b/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Dual).json @@ -21,70 +21,103 @@ ], "printable_area": [ "0x0", - "340x0", - "340x300", + "255x0", + "255x300", "0x300" ], "printable_height": "300", - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "3000", + "3000", "3000", "3000" ], "machine_max_acceleration_extruding": [ + "1000", + "300", "1000", "300" ], "machine_max_acceleration_retracting": [ + "3000", + "1500", "3000", "1500" ], "machine_max_acceleration_travel": [ + "1500", + "500", "1500", "500" ], "machine_max_acceleration_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_speed_x": [ + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], diff --git a/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Left).json b/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Left).json index 433dddfff7..97eee4b9c3 100644 --- a/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Left).json +++ b/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Left).json @@ -21,70 +21,103 @@ ], "printable_area": [ "0x0", - "340x0", - "340x300", + "300x0", + "300x300", "0x300" ], "printable_height": "300", - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "3000", + "3000", "3000", "3000" ], "machine_max_acceleration_extruding": [ + "1000", + "300", "1000", "300" ], "machine_max_acceleration_retracting": [ + "3000", + "1500", "3000", "1500" ], "machine_max_acceleration_travel": [ + "1500", + "500", "1500", "500" ], "machine_max_acceleration_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_speed_x": [ + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], diff --git a/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Right).json b/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Right).json index 2cbbe2fc49..2d42bf5b53 100644 --- a/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Right).json +++ b/resources/profiles/Raise3D/machine/Raise3D Pro3 0.4 nozzle (Right).json @@ -21,70 +21,103 @@ ], "printable_area": [ "0x0", - "340x0", - "340x300", + "300x0", + "300x300", "0x300" ], "printable_height": "300", - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "3000", + "3000", "3000", "3000" ], "machine_max_acceleration_extruding": [ + "1000", + "300", "1000", "300" ], "machine_max_acceleration_retracting": [ + "3000", + "1500", "3000", "1500" ], "machine_max_acceleration_travel": [ + "1500", + "500", "1500", "500" ], "machine_max_acceleration_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_speed_x": [ + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], diff --git a/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Dual).json b/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Dual).json index 566911b4c6..a70c9d4583 100644 --- a/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Dual).json +++ b/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Dual).json @@ -21,70 +21,103 @@ ], "printable_area": [ "0x0", - "340x0", - "340x300", + "255x0", + "255x300", "0x300" ], "printable_height": "605", - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "3000", + "3000", "3000", "3000" ], "machine_max_acceleration_extruding": [ + "1000", + "300", "1000", "300" ], "machine_max_acceleration_retracting": [ + "3000", + "1500", "3000", "1500" ], "machine_max_acceleration_travel": [ + "1500", + "500", "1500", "500" ], "machine_max_acceleration_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_speed_x": [ + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], diff --git a/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Left).json b/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Left).json index daaef6abdb..69fa4fcb07 100644 --- a/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Left).json +++ b/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Left).json @@ -21,70 +21,103 @@ ], "printable_area": [ "0x0", - "340x0", - "340x300", + "300x0", + "300x300", "0x300" ], "printable_height": "605", - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "3000", + "3000", "3000", "3000" ], "machine_max_acceleration_extruding": [ + "1000", + "300", "1000", "300" ], "machine_max_acceleration_retracting": [ + "3000", + "1500", "3000", "1500" ], "machine_max_acceleration_travel": [ + "1500", + "500", "1500", "500" ], "machine_max_acceleration_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_speed_x": [ + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], diff --git a/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Right).json b/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Right).json index 1e842a07ae..d7274d5185 100644 --- a/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Right).json +++ b/resources/profiles/Raise3D/machine/Raise3D Pro3 Plus 0.4 nozzle (Right).json @@ -21,70 +21,103 @@ ], "printable_area": [ "0x0", - "340x0", - "340x300", + "300x0", + "300x300", "0x300" ], "printable_height": "605", - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "3000", + "3000", "3000", "3000" ], "machine_max_acceleration_extruding": [ + "1000", + "300", "1000", "300" ], "machine_max_acceleration_retracting": [ + "3000", + "1500", "3000", "1500" ], "machine_max_acceleration_travel": [ + "1500", + "500", "1500", "500" ], "machine_max_acceleration_x": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_speed_x": [ + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], diff --git a/resources/profiles/Ratrig.json b/resources/profiles/Ratrig.json index 743333f9aa..4f161b0001 100644 --- a/resources/profiles/Ratrig.json +++ b/resources/profiles/Ratrig.json @@ -1,6 +1,6 @@ { "name": "RatRig", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "RatRig configurations", "machine_model_list": [ diff --git a/resources/profiles/Ratrig/filament/Generic ABS @RatRig.json b/resources/profiles/Ratrig/filament/Generic ABS @RatRig.json index d45720cf60..6086cfa0e8 100644 --- a/resources/profiles/Ratrig/filament/Generic ABS @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic ABS @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @RatRig", - "inherits": "fdm_filament_abs", "renamed_from": "RatRig Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "0BepsauXBs5bxPYO", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Ratrig/filament/Generic ABS BigNozzle @RatRig.json b/resources/profiles/Ratrig/filament/Generic ABS BigNozzle @RatRig.json index 3d071c779a..19cc67c606 100644 --- a/resources/profiles/Ratrig/filament/Generic ABS BigNozzle @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic ABS BigNozzle @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS BigNozzle @RatRig", - "inherits": "fdm_filament_abs", "renamed_from": "RatRig BigNozzle ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "4GJ4GHOuApWBbQoS", "filament_id": "OFnyHfcv", diff --git a/resources/profiles/Ratrig/filament/Generic ASA @RatRig.json b/resources/profiles/Ratrig/filament/Generic ASA @RatRig.json index 9b70da5bab..83cbfc3240 100644 --- a/resources/profiles/Ratrig/filament/Generic ASA @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic ASA @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @RatRig", - "inherits": "fdm_filament_asa", "renamed_from": "RatRig Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "cogJbKPAXzyCQgvf", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Ratrig/filament/Generic ASA BigNozzle @RatRig.json b/resources/profiles/Ratrig/filament/Generic ASA BigNozzle @RatRig.json index f6f85f78e7..6a66e5856c 100644 --- a/resources/profiles/Ratrig/filament/Generic ASA BigNozzle @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic ASA BigNozzle @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA BigNozzle @RatRig", - "inherits": "fdm_filament_asa", "renamed_from": "RatRig BigNozzle ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "n2V9gkhbqWJzsQBK", "filament_id": "OF4GM5qX", diff --git a/resources/profiles/Ratrig/filament/Generic PA @RatRig.json b/resources/profiles/Ratrig/filament/Generic PA @RatRig.json index 58d6757d78..15f498d4cf 100644 --- a/resources/profiles/Ratrig/filament/Generic PA @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PA @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @RatRig", - "inherits": "fdm_filament_pa", "renamed_from": "RatRig Generic PA", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "5rpTzhFjS6Ar4Xy8", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Ratrig/filament/Generic PA-CF @RatRig.json b/resources/profiles/Ratrig/filament/Generic PA-CF @RatRig.json index 5b0ea38d75..fe0c69592a 100644 --- a/resources/profiles/Ratrig/filament/Generic PA-CF @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PA-CF @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @RatRig", - "inherits": "fdm_filament_pa", "renamed_from": "RatRig Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "ps7duiwT8adNshEO", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Ratrig/filament/Generic PC @RatRig.json b/resources/profiles/Ratrig/filament/Generic PC @RatRig.json index c6dc89cce5..6ca17d3395 100644 --- a/resources/profiles/Ratrig/filament/Generic PC @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PC @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @RatRig", - "inherits": "fdm_filament_pc", "renamed_from": "RatRig Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "7x5VtUIevdAmBqqA", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Ratrig/filament/Generic PCTG @RatRig.json b/resources/profiles/Ratrig/filament/Generic PCTG @RatRig.json index d3e06685b5..2a4e89addc 100644 --- a/resources/profiles/Ratrig/filament/Generic PCTG @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PCTG @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PCTG @RatRig", - "inherits": "fdm_filament_pet", "renamed_from": "RatRig Generic PCTG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "JMTUqdhoQzCb6ZxJ", "filament_id": "OFu1evlr", diff --git a/resources/profiles/Ratrig/filament/Generic PCTG BigNozzle @RatRig.json b/resources/profiles/Ratrig/filament/Generic PCTG BigNozzle @RatRig.json index 2e47eb6765..a197e62102 100644 --- a/resources/profiles/Ratrig/filament/Generic PCTG BigNozzle @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PCTG BigNozzle @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PCTG BigNozzle @RatRig", - "inherits": "fdm_filament_pctg", "renamed_from": "RatRig BigNozzle PCTG", + "inherits": "fdm_filament_pctg", "from": "system", "setting_id": "HPaol79uY9NdhasQ", "filament_id": "OFXW4CDh", diff --git a/resources/profiles/Ratrig/filament/Generic PETG @RatRig.json b/resources/profiles/Ratrig/filament/Generic PETG @RatRig.json index b0182712b1..633c0a30db 100644 --- a/resources/profiles/Ratrig/filament/Generic PETG @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PETG @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @RatRig", - "inherits": "fdm_filament_pet", "renamed_from": "RatRig Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "6p3FfhhSIAOQGEzT", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Ratrig/filament/Generic PETG BigNozzle @RatRig.json b/resources/profiles/Ratrig/filament/Generic PETG BigNozzle @RatRig.json index 213f41628c..6b3c70b39d 100644 --- a/resources/profiles/Ratrig/filament/Generic PETG BigNozzle @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PETG BigNozzle @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG BigNozzle @RatRig", - "inherits": "fdm_filament_pet", "renamed_from": "RatRig BigNozzle PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "pRM6IVX5T3y6Ywj4", "filament_id": "OFvD0Qqt", diff --git a/resources/profiles/Ratrig/filament/Generic PLA @RatRig.json b/resources/profiles/Ratrig/filament/Generic PLA @RatRig.json index b8a33f4da4..c8a70e0751 100644 --- a/resources/profiles/Ratrig/filament/Generic PLA @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PLA @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @RatRig", - "inherits": "fdm_filament_pla", "renamed_from": "RatRig Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "BsQA6ChWHTDUSlii", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Ratrig/filament/Generic PLA BigNozzle @RatRig.json b/resources/profiles/Ratrig/filament/Generic PLA BigNozzle @RatRig.json index 08d546aafc..50774b8799 100644 --- a/resources/profiles/Ratrig/filament/Generic PLA BigNozzle @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PLA BigNozzle @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA BigNozzle @RatRig", - "inherits": "fdm_filament_pla", "renamed_from": "RatRig BigNozzle PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "WEI4QiKyANQOK7dG", "filament_id": "OFqFRiLb", diff --git a/resources/profiles/Ratrig/filament/Generic PLA-CF @RatRig.json b/resources/profiles/Ratrig/filament/Generic PLA-CF @RatRig.json index 288c892f09..4771b2caad 100644 --- a/resources/profiles/Ratrig/filament/Generic PLA-CF @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PLA-CF @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @RatRig", - "inherits": "fdm_filament_pla", "renamed_from": "RatRig Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "ai3I13fL5giqq5LW", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Ratrig/filament/Generic PVA @RatRig.json b/resources/profiles/Ratrig/filament/Generic PVA @RatRig.json index 016b146181..09e8cad05a 100644 --- a/resources/profiles/Ratrig/filament/Generic PVA @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic PVA @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @RatRig", - "inherits": "fdm_filament_pva", "renamed_from": "RatRig Generic PVA", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "y6DJYhqAmxMng8Kf", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Ratrig/filament/Generic TPU @RatRig.json b/resources/profiles/Ratrig/filament/Generic TPU @RatRig.json index e8ea6176b7..6ed3edbeb0 100644 --- a/resources/profiles/Ratrig/filament/Generic TPU @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic TPU @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @RatRig", - "inherits": "fdm_filament_tpu", "renamed_from": "RatRig Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "dAIGKmZctSRhP1Lu", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/Ratrig/filament/Generic TPU BigNozzle @RatRig.json b/resources/profiles/Ratrig/filament/Generic TPU BigNozzle @RatRig.json index 4714f57d5a..8bd40ac062 100644 --- a/resources/profiles/Ratrig/filament/Generic TPU BigNozzle @RatRig.json +++ b/resources/profiles/Ratrig/filament/Generic TPU BigNozzle @RatRig.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU BigNozzle @RatRig", - "inherits": "fdm_filament_tpu", "renamed_from": "RatRig BigNozzle TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "9UWg2cO61XFdlWxo", "filament_id": "OF5tX6va", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json index 28412dd804..db452dcf21 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 300 0.8 nozzle.json @@ -2,10 +2,10 @@ "type": "machine", "name": "RatRig V-Core 4 300 0.8 nozzle", "inherits": "fdm_klipper_common", - "default_print_profile": "0.30mm Big @RatRig V-Core 4 0.8", "from": "system", "setting_id": "feTeGuFkLzWFFSC4", "instantiation": "true", + "default_print_profile": "0.30mm Big @RatRig V-Core 4 0.8", "printer_model": "RatRig V-Core 4 300", "nozzle_diameter": [ "0.8" diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json index a40343b574..649efabebf 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 400 0.8 nozzle.json @@ -2,10 +2,10 @@ "type": "machine", "name": "RatRig V-Core 4 400 0.8 nozzle", "inherits": "fdm_klipper_common", - "default_print_profile": "0.30mm Big @RatRig V-Core 4 0.8", "from": "system", "setting_id": "DQ7Lzsuk87A4qtav", "instantiation": "true", + "default_print_profile": "0.30mm Big @RatRig V-Core 4 0.8", "printer_model": "RatRig V-Core 4 400", "printer_variant": "0.8", "nozzle_diameter": [ diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json index 828b2d8711..75f518c286 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 500 0.8 nozzle.json @@ -2,10 +2,10 @@ "type": "machine", "name": "RatRig V-Core 4 500 0.8 nozzle", "inherits": "fdm_klipper_common", - "default_print_profile": "0.30mm Big @RatRig V-Core 4 0.8", "from": "system", "setting_id": "VMKIyofeEpPvUvkY", "instantiation": "true", + "default_print_profile": "0.30mm Big @RatRig V-Core 4 0.8", "printer_model": "RatRig V-Core 4 500", "printer_variant": "0.8", "nozzle_diameter": [ diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json index 9e3f45189c..d5cae37925 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.4 nozzle.json @@ -24,62 +24,92 @@ "0x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,12 +123,15 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ @@ -106,12 +139,15 @@ "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json index 51856c4305..be901905a7 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.5 nozzle.json @@ -24,62 +24,92 @@ "0x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.25", "0.25" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json index f255b58824..5fbbf455cc 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.6 nozzle.json @@ -24,62 +24,92 @@ "0x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.3", "0.3" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json index cca40b5979..56f1e96dac 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 0.8 nozzle.json @@ -24,62 +24,92 @@ "0x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.3", "0.3" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json index 4b49fc36a7..e6789ac2f4 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.4 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json index 5e9a55e6e6..532351fa0e 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.5 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json index 69848e1743..196b0970e3 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.6 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json index 0018a5d250..1a5b501ca9 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 COPY MODE 0.8 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json index 902ba9a044..24dff4f024 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.4 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json index 873385c476..37bc1f5f00 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.5 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json index b9ba5860ea..433d140877 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.6 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json index 83cac78c49..d1f2d58e25 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 300 MIRROR MODE 0.8 nozzle.json @@ -24,62 +24,92 @@ "75x300" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json index 8d4683eeed..8bd346b1bb 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.4 nozzle.json @@ -24,62 +24,92 @@ "0x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,12 +123,15 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ @@ -106,12 +139,15 @@ "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json index cc30cfd0dc..11a65871b7 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.5 nozzle.json @@ -24,62 +24,92 @@ "0x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.25", "0.25" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json index e960f29742..0111ef8e99 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.6 nozzle.json @@ -24,62 +24,92 @@ "0x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.3", "0.3" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json index 568f9ab12f..d3ec81c9c9 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 0.8 nozzle.json @@ -24,62 +24,92 @@ "0x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.3", "0.3" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json index 8837dd0937..ff40588926 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.4 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json index be7c731a19..1590ca8b97 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.5 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json index f0af89ed75..70e56acda2 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.6 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json index 2079c3f39e..e56436666d 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 COPY MODE 0.8 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json index 034fbc4477..ead084348a 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.4 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json index 2e5d00ff9f..a8b8e11c10 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.5 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json index 00c1a3d339..e003b9ff29 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.6 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json index 668450c706..4732e2874b 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 400 MIRROR MODE 0.8 nozzle.json @@ -24,62 +24,92 @@ "100x400" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json index e117439353..23fe24b867 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.4 nozzle.json @@ -24,62 +24,92 @@ "0x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,12 +123,15 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ @@ -106,12 +139,15 @@ "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json index 87096aa4e7..5cd0d2a7aa 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.5 nozzle.json @@ -24,62 +24,92 @@ "0x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.25", "0.25" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json index 61903d2dc6..f2beb5c4cd 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.6 nozzle.json @@ -24,62 +24,92 @@ "0x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.3", "0.3" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json index 275241f8bf..1db28524d5 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 0.8 nozzle.json @@ -24,62 +24,92 @@ "0x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.3", "0.3" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json index 1ecc8bb035..53fe2527a3 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.4 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json index 08ca62e3bb..2ef06808bf 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.5 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json index 3f7c43607e..41687594a6 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.6 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json index ab1a259368..508b740eda 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 COPY MODE 0.8 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_COPY\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json index f4d6d57d1b..33f40fbeb6 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.4 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json index 5c89275a42..e41b672612 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.5 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json index 1b8edc1400..f1f959b1c6 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.6 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json index 12ca6a0a2a..95d215cfb8 100644 --- a/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json +++ b/resources/profiles/Ratrig/machine/RatRig V-Core 4 IDEX 500 MIRROR MODE 0.8 nozzle.json @@ -24,62 +24,92 @@ "125x500" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "200", + "200", "200", "200" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "200", + "200", "200", "200" ], "machine_max_acceleration_e": [ + "5000", + "5000", "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_retracting": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_travel": [ + "20000", + "20000", "20000", "20000" ], "machine_max_jerk_x": [ + "5", + "5", "5", "5" ], "machine_max_jerk_y": [ + "5", + "5", "5", "5" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], @@ -93,24 +123,31 @@ "extruder_clearance_height_to_rod": "25", "extruder_clearance_height_to_lid": "140", "retract_lift_below": [ + "0.2", "0.2" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_speed": [ + "120", "120" ], "deretraction_speed": [ + "120", "120" ], "wipe": [ + "1", "1" ], "retract_before_wipe": [ + "70%", "70%" ], "z_hop": [ + "0.2", "0.2" ], "machine_start_gcode": "G28\nIDEX_MIRROR\nSTART_PRINT EXTRUDER_TEMP={first_layer_temperature[0]},{first_layer_temperature[1]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]},{temperature[1]} BED_TEMP=[first_layer_bed_temperature] INITIAL_TOOL={initial_tool} TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}", diff --git a/resources/profiles/RolohaunDesign.json b/resources/profiles/RolohaunDesign.json index e0b7a33301..18eb9e4fc3 100644 --- a/resources/profiles/RolohaunDesign.json +++ b/resources/profiles/RolohaunDesign.json @@ -1,6 +1,6 @@ { "name": "RolohaunDesign", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "RolohaunDesign Printer Profiles", "machine_model_list": [ diff --git a/resources/profiles/RolohaunDesign/machine/Rolohaun Delta Flyer Refit 0.4 nozzle.json b/resources/profiles/RolohaunDesign/machine/Rolohaun Delta Flyer Refit 0.4 nozzle.json index f5c095918f..4637e5ad14 100644 --- a/resources/profiles/RolohaunDesign/machine/Rolohaun Delta Flyer Refit 0.4 nozzle.json +++ b/resources/profiles/RolohaunDesign/machine/Rolohaun Delta Flyer Refit 0.4 nozzle.json @@ -3,8 +3,8 @@ "name": "Rolohaun Delta Flyer Refit 0.4 nozzle", "inherits": "fdm_common_Rook MK1 LDO", "from": "system", - "instantiation": "true", "setting_id": "xRvK2POOU8rx7dLH", + "instantiation": "true", "bed_custom_model": "", "printer_structure": "delta", "deretraction_speed": [ diff --git a/resources/profiles/SecKit.json b/resources/profiles/SecKit.json index 91804bff0a..e4d4f91e80 100644 --- a/resources/profiles/SecKit.json +++ b/resources/profiles/SecKit.json @@ -1,6 +1,6 @@ { "name": "SecKit", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "SecKit configurations", "machine_model_list": [ diff --git a/resources/profiles/SecKit/filament/Generic ABS @SecKit.json b/resources/profiles/SecKit/filament/Generic ABS @SecKit.json index cdd9ce2f62..32db36b0fb 100644 --- a/resources/profiles/SecKit/filament/Generic ABS @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic ABS @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @SecKit", - "inherits": "fdm_filament_abs", "renamed_from": "SecKit Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "VSrXBQUNBQMwUc08", "filament_id": "OFY9muEs", diff --git a/resources/profiles/SecKit/filament/Generic ASA @SecKit.json b/resources/profiles/SecKit/filament/Generic ASA @SecKit.json index 366b20172b..7d48828374 100644 --- a/resources/profiles/SecKit/filament/Generic ASA @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic ASA @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @SecKit", - "inherits": "fdm_filament_asa", "renamed_from": "SecKit Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "usCYRq4VuLqXvb0T", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/SecKit/filament/Generic PA @SecKit.json b/resources/profiles/SecKit/filament/Generic PA @SecKit.json index 7746d8628a..0c3ac3a4c2 100644 --- a/resources/profiles/SecKit/filament/Generic PA @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic PA @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @SecKit", - "inherits": "fdm_filament_pa", "renamed_from": "SecKit Generic PA", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "uAuptETLwGxTsthC", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/SecKit/filament/Generic PA-CF @SecKit.json b/resources/profiles/SecKit/filament/Generic PA-CF @SecKit.json index 52c0bae450..0833f7c993 100644 --- a/resources/profiles/SecKit/filament/Generic PA-CF @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic PA-CF @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @SecKit", - "inherits": "fdm_filament_pa", "renamed_from": "SecKit Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "P6G8DjjyfAFgGaj2", "filament_id": "OFQLcbps", diff --git a/resources/profiles/SecKit/filament/Generic PC @SecKit.json b/resources/profiles/SecKit/filament/Generic PC @SecKit.json index 689f3ea553..4d08959ca5 100644 --- a/resources/profiles/SecKit/filament/Generic PC @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic PC @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @SecKit", - "inherits": "fdm_filament_pc", "renamed_from": "SecKit Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "PxmBHXsdhZGR9bYv", "filament_id": "OFLakOUI", diff --git a/resources/profiles/SecKit/filament/Generic PETG @SecKit.json b/resources/profiles/SecKit/filament/Generic PETG @SecKit.json index 05c5c753c6..2b2181c88d 100644 --- a/resources/profiles/SecKit/filament/Generic PETG @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic PETG @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @SecKit", - "inherits": "fdm_filament_pet", "renamed_from": "SecKit Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "Qt4oXABB5Fukbz46", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/SecKit/filament/Generic PLA @SecKit.json b/resources/profiles/SecKit/filament/Generic PLA @SecKit.json index b3cd1c2ffc..7a87454000 100644 --- a/resources/profiles/SecKit/filament/Generic PLA @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic PLA @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @SecKit", - "inherits": "fdm_filament_pla", "renamed_from": "SecKit Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "uWvI4RDQiYLFN7pp", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/SecKit/filament/Generic PLA-CF @SecKit.json b/resources/profiles/SecKit/filament/Generic PLA-CF @SecKit.json index 507716caee..d68c13d36b 100644 --- a/resources/profiles/SecKit/filament/Generic PLA-CF @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic PLA-CF @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @SecKit", - "inherits": "fdm_filament_pla", "renamed_from": "SecKit Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "znagqvEsDcHYse9M", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/SecKit/filament/Generic PVA @SecKit.json b/resources/profiles/SecKit/filament/Generic PVA @SecKit.json index 13f7d50673..b149854c0e 100644 --- a/resources/profiles/SecKit/filament/Generic PVA @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic PVA @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @SecKit", - "inherits": "fdm_filament_pva", "renamed_from": "SecKit Generic PVA", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "DIUaGXpIF3fUfxqg", "filament_id": "OFDvXujf", diff --git a/resources/profiles/SecKit/filament/Generic TPU @SecKit.json b/resources/profiles/SecKit/filament/Generic TPU @SecKit.json index 96d9c38a60..d4e3952768 100644 --- a/resources/profiles/SecKit/filament/Generic TPU @SecKit.json +++ b/resources/profiles/SecKit/filament/Generic TPU @SecKit.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @SecKit", - "inherits": "fdm_filament_tpu", "renamed_from": "SecKit Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "agKm2K9w4ZOmZN8c", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/SeeMeCNC.json b/resources/profiles/SeeMeCNC.json index 21db5e4e3e..8bff5661ae 100644 --- a/resources/profiles/SeeMeCNC.json +++ b/resources/profiles/SeeMeCNC.json @@ -1,6 +1,6 @@ { "name": "SeeMeCNC", - "version": "2.4.0.05", + "version": "2.4.0.06", "force_update": "1", "description": "SeeMeCNC configurations - Full profile set for Artemis, BOSSdelta, and RostockMAX printers", "machine_model_list": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json index 23ccc8cd08..6aabc9d4c3 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_4mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json index f16bdf8620..9fb7eef8a8 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_5mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json index 7bf1733799..f72a25c9cc 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_0_7mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json index 68316ff085..098a6fcc49 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_Artemis_1_0mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json index 4709989e11..d36eb598e8 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_4mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json index a09599a118..b88111ae62 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_5mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json index a045d6acb6..4c121f7906 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_0_7mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json index 4fbdc6cdf0..06fdc03bd9 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0505_1_0mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json index 1d40d2b7d8..d70145fc2a 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_4mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json index f007e2c307..cf29664116 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_5mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json index ae455b50bc..4e0388eacc 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_0_7mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json index 28a865c33e..38d26bdf65 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0510_1_0mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json index 6db1c32408..dd7e5b4e42 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_4mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json index 0bba926946..727b56ffa1 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_5mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json index 623edc7966..8eac323e8b 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_0_7mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json index 9f1b324a3b..ecdda09652 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta500_0521_1_0mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json index 51ca348ee2..7acf96a631 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_4mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json index 78638f67ad..fe13b26823 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_5mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json index d3d58505ed..3e898ebed7 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_0_7mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json index c2ffdb20a0..f192d5c620 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_BOSSdelta_300_1_0mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json index c53c7f7085..a883274039 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_4mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json index 3e8b24699f..f9ae2d5ceb 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_5mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json index d1fd58da56..e3f08f903f 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_0_7mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json index 648c797d61..d8131eab5b 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v3.2_1_0mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json index 39252fa29e..86febcf52a 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_4mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json index f1dbfc5e2f..1ca829f83c 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_5mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json index c7bce4faca..2a9320d542 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_0_7mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json index f1ec174cf2..6213c30b3a 100644 --- a/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json +++ b/resources/profiles/SeeMeCNC/machine/SeeMeCNC_RostockMAX_v4_1_0mm.json @@ -120,6 +120,7 @@ "15" ], "machine_max_junction_deviation": [ + "0.01", "0.01" ], "machine_max_speed_e": [ diff --git a/resources/profiles/Snapmaker.json b/resources/profiles/Snapmaker.json index 06acef0b0e..d13ed8bf21 100644 --- a/resources/profiles/Snapmaker.json +++ b/resources/profiles/Snapmaker.json @@ -1,6 +1,6 @@ { "name": "Snapmaker", - "version": "02.04.00.15", + "version": "02.04.00.16", "force_update": "0", "description": "Snapmaker configurations", "machine_model_list": [ diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json index 44125a8381..79305ab57e 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite Dual PLA @0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "PolyLite Dual PLA @0.2 nozzle", "inherits": "PolyLite PLA @0.2 nozzle", - "filament_id": "OFYGbPHX", "from": "system", "setting_id": "jhmy4YHi9MuL0DWu", + "filament_id": "OFYGbPHX", "instantiation": "true", "compatible_printers": [ "Snapmaker A250 Dual (0.2 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json index 8e4075ccf7..f826452d55 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA @0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "PolyLite J1 PLA @0.2 nozzle", "inherits": "PolyLite PLA @0.2 nozzle", - "filament_id": "OF7SliVn", "from": "system", "setting_id": "jFlRSxx0KvN3BOUu", + "filament_id": "OF7SliVn", "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.2 nozzle)" diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json index 0bbce7eec8..14a97da12f 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyLite J1 PLA.json @@ -2,9 +2,9 @@ "type": "filament", "name": "PolyLite J1 PLA", "inherits": "PolyLite PLA @base", - "filament_id": "OF7SliVn", "from": "system", "setting_id": "wcpOTTMyZNPFKyXr", + "filament_id": "OF7SliVn", "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.4 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json index 1f28bcfac6..b8796ad051 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra Dual PLA @0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "PolyTerra Dual PLA @0.2 nozzle", "inherits": "PolyTerra PLA @0.2 nozzle", - "filament_id": "OFCccVrQ", "from": "system", "setting_id": "UQYgjH1uVxf3d2Nv", + "filament_id": "OFCccVrQ", "instantiation": "true", "compatible_printers": [ "Snapmaker A250 Dual (0.2 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json index 6e424a84d3..4493bd50f6 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA @0.2 nozzle.json @@ -2,9 +2,9 @@ "type": "filament", "name": "PolyTerra J1 PLA @0.2 nozzle", "inherits": "PolyTerra PLA @0.2 nozzle", - "filament_id": "OF43Raws", "from": "system", "setting_id": "mxKHxGmBZzPLS82O", + "filament_id": "OF43Raws", "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.2 nozzle)" diff --git a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json index 55fb74f4f7..58e6989223 100644 --- a/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json +++ b/resources/profiles/Snapmaker/filament/Polymaker/PolyTerra J1 PLA.json @@ -2,9 +2,9 @@ "type": "filament", "name": "PolyTerra J1 PLA", "inherits": "PolyTerra PLA @base", - "filament_id": "OF43Raws", "from": "system", "setting_id": "4MZWZX7QPBzxdEGj", + "filament_id": "OF43Raws", "instantiation": "true", "compatible_printers": [ "Snapmaker J1 (0.4 nozzle)", diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json index f1c3aa30a1..9d9e3918cf 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.2 nozzle.json @@ -5,20 +5,19 @@ "from": "system", "setting_id": "Ujul2YTBwfldFiFd", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_max_volumetric_speed": [ - "1", "1" ], "filament_ramming_travel_time": [ - "0", "0" ], "long_retractions_when_ec": [ - "0", "0" ], "retraction_distances_when_ec": [ - "0", "0" ], "compatible_printers": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json index 66a535b7fb..985505a027 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.6 nozzle.json @@ -5,16 +5,16 @@ "from": "system", "setting_id": "2FfQZdp5xunngnF0", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_ramming_travel_time": [ - "0", "0" ], "long_retractions_when_ec": [ - "0", "0" ], "retraction_distances_when_ec": [ - "0", "0" ], "compatible_printers": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json index 04446a623e..83c1b17971 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PETG HF @U1 0.8 nozzle.json @@ -5,16 +5,16 @@ "from": "system", "setting_id": "ebANa67V4B2nwUaX", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_ramming_travel_time": [ - "0", "0" ], "long_retractions_when_ec": [ - "0", "0" ], "retraction_distances_when_ec": [ - "0", "0" ], "compatible_printers": [ diff --git a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json index 9ce38a9782..357c5de50a 100644 --- a/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json +++ b/resources/profiles/Snapmaker/filament/Snapmaker PLA-CF @U1 0.4 nozzle.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "Snapmaker PLA-CF @U1 0.4 nozzle", + "renamed_from": "Snapmaker PLA-CF @U1", "inherits": "fdm_filament_pla", "from": "system", - "renamed_from": "Snapmaker PLA-CF @U1", "setting_id": "2INwruC3ZVkBTdUT", "filament_id": "OFhQf8ou", "instantiation": "true", diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json index 183e125c73..674b82930c 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.2 nozzle).json @@ -36,14 +36,32 @@ ], "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", "30", "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", "20", "12" ], @@ -67,7 +85,12 @@ "0.2", "0.2" ], - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], "printable_area": [ "0.5x1", "270.5x1", @@ -185,7 +208,12 @@ "machine_unload_filament_time": "0", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", "machine_pause_gcode": "M600", - "nozzle_volume": "143", + "nozzle_volume": [ + "143", + "143", + "143", + "143" + ], "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", "default_print_profile": "0.10 Standard @Snapmaker U1 (0.2 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json index 6d2ec2cfe6..3acd21c2dd 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4 nozzle).json @@ -36,14 +36,32 @@ ], "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", "30", "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", "20", "12" ], @@ -67,7 +85,12 @@ "0.4", "0.4" ], - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], "printable_area": [ "0.5x1", "270.5x1", @@ -187,7 +210,12 @@ "default_print_profile": "0.20 Standard @Snapmaker U1 (0.4 nozzle)", "machine_pause_gcode": "M600", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", - "nozzle_volume": "143", + "nozzle_volume": [ + "143", + "143", + "143", + "143" + ], "resonance_avoidance": "1", "min_resonance_avoidance_speed": "40", "max_resonance_avoidance_speed": "90" diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json index c9866329bd..cc4e7a0515 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.4+0.6 nozzle).json @@ -26,5 +26,10 @@ "0.6", "0.6" ], - "nozzle_type": "stainless_steel" + "nozzle_type": [ + "stainless_steel", + "stainless_steel", + "stainless_steel", + "stainless_steel" + ] } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json index a6cb0d0bd3..98b6f7e683 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.6 nozzle).json @@ -36,14 +36,32 @@ ], "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", "30", "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", "20", "12" ], @@ -67,7 +85,12 @@ "0.6", "0.6" ], - "nozzle_type": "stainless_steel", + "nozzle_type": [ + "stainless_steel", + "stainless_steel", + "stainless_steel", + "stainless_steel" + ], "printable_area": [ "0.5x1", "270.5x1", @@ -186,6 +209,11 @@ "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", "machine_pause_gcode": "M600", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", - "nozzle_volume": "143", + "nozzle_volume": [ + "143", + "143", + "143", + "143" + ], "default_print_profile": "0.30 Standard @Snapmaker U1 (0.6 nozzle)" } diff --git a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json index ef4da1a516..6ab566e0aa 100644 --- a/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json +++ b/resources/profiles/Snapmaker/machine/Snapmaker U1 (0.8 nozzle).json @@ -36,14 +36,32 @@ ], "machine_end_gcode": ";===== date: 20260605 =====================\n; layer [layer_num]\n; max_layer_z [max_layer_z]\n; print_sequence [print_sequence]\n\n{if print_sequence == \"by object\"}\n{\nlocal move_z = max_print_height;\n\nif max_layer_z < ((max_print_height - z_offset) - 2) then\n move_z = z_offset + min(((max_layer_z - z_offset) + 2), max_print_height);\nendif\n}\n\nG91\nG1 X2 Y2 Z1 F24000\nG90\nG1 Z{move_z} F600\n{endif}\n\nPRINT_END\nTIMELAPSE_STOP\n", "machine_max_jerk_z": [ + "3", + "0.4", + "3", + "0.4", + "3", + "0.4", "3", "0.4" ], "machine_max_speed_e": [ + "30", + "25", + "30", + "25", + "30", + "25", "30", "25" ], "machine_max_speed_z": [ + "20", + "12", + "20", + "12", + "20", + "12", "20", "12" ], @@ -67,7 +85,12 @@ "0.8", "0.8" ], - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel", + "hardened_steel", + "hardened_steel" + ], "printable_area": [ "0.5x1", "270.5x1", @@ -186,6 +209,11 @@ "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT", "machine_pause_gcode": "M600", "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count} CURRENT_LAYER={layer_num+1}", - "nozzle_volume": "143", + "nozzle_volume": [ + "143", + "143", + "143", + "143" + ], "default_print_profile": "0.40 Standard @Snapmaker U1 (0.8 nozzle)" } diff --git a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json index 5240f242c4..3fbacd5f4f 100644 --- a/resources/profiles/Snapmaker/process/fdm_process_U1_common.json +++ b/resources/profiles/Snapmaker/process/fdm_process_U1_common.json @@ -28,7 +28,7 @@ "ironing_type": "no ironing", "layer_height": "0.2", "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[0]}_{print_time}.gcode", + "filename_format": "{input_filename_base}_{filament_type[initial_no_support_extruder]}_{int(total_weight*10) / 10.0}g_{print_time}.gcode", "detect_overhang_wall": "1", "overhang_1_4_speed": "0", "overhang_2_4_speed": "50", diff --git a/resources/profiles/Sovol.json b/resources/profiles/Sovol.json index 7f08417ed7..1b30ae4143 100644 --- a/resources/profiles/Sovol.json +++ b/resources/profiles/Sovol.json @@ -1,7 +1,7 @@ { "name": "Sovol", "url": "", - "version": "02.04.00.04", + "version": "02.04.00.08", "force_update": "0", "description": "Sovol configurations", "machine_model_list": [ @@ -167,10 +167,6 @@ "name": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle", "sub_path": "process/0.20mm Standard @Sovol SV08 MAX 0.4 nozzle.json" }, - { - "name": "0.20mm Standard @Sovol Zero 0.4 nozzle", - "sub_path": "process/0.20mm Standard @Sovol Zero 0.4 nozzle.json" - }, { "name": "0.28mm Fast @Sovol SV06 ACE", "sub_path": "process/0.28mm Fast @Sovol SV06 ACE 0.4 nozzle.json" @@ -198,6 +194,74 @@ { "name": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle", "sub_path": "process/0.40mm Standard @Sovol SV08 MAX 0.8 nozzle.json" + }, + { + "name": "fdm_process_zero", + "sub_path": "process/fdm_process_zero.json" + }, + { + "name": "0.06mm Quality @Sovol Zero 0.2 nozzle", + "sub_path": "process/0.06mm Quality @Sovol Zero 0.2 nozzle.json" + }, + { + "name": "0.10mm Standard @Sovol Zero 0.2 nozzle", + "sub_path": "process/0.10mm Standard @Sovol Zero 0.2 nozzle.json" + }, + { + "name": "0.12mm Quality @Sovol Zero 0.4 nozzle", + "sub_path": "process/0.12mm Quality @Sovol Zero 0.4 nozzle.json" + }, + { + "name": "0.14mm Fast @Sovol Zero 0.2 nozzle", + "sub_path": "process/0.14mm Fast @Sovol Zero 0.2 nozzle.json" + }, + { + "name": "0.15mm Quality @Sovol Zero 0.6 nozzle", + "sub_path": "process/0.15mm Quality @Sovol Zero 0.6 nozzle.json" + }, + { + "name": "0.20mm Quality @Sovol Zero 0.8 nozzle", + "sub_path": "process/0.20mm Quality @Sovol Zero 0.8 nozzle.json" + }, + { + "name": "0.20mm Standard @Sovol Zero 0.4 nozzle", + "sub_path": "process/0.20mm Standard @Sovol Zero 0.4 nozzle.json" + }, + { + "name": "0.25mm Quality @Sovol Zero 1.0 nozzle", + "sub_path": "process/0.25mm Quality @Sovol Zero 1.0 nozzle.json" + }, + { + "name": "0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle", + "sub_path": "process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json" + }, + { + "name": "0.28mm Fast @Sovol Zero 0.4 nozzle", + "sub_path": "process/0.28mm Fast @Sovol Zero 0.4 nozzle.json" + }, + { + "name": "0.30mm Standard @Sovol Zero 0.6 nozzle", + "sub_path": "process/0.30mm Standard @Sovol Zero 0.6 nozzle.json" + }, + { + "name": "0.40mm Standard @Sovol Zero 0.8 nozzle", + "sub_path": "process/0.40mm Standard @Sovol Zero 0.8 nozzle.json" + }, + { + "name": "0.42mm Fast @Sovol Zero 0.6 nozzle", + "sub_path": "process/0.42mm Fast @Sovol Zero 0.6 nozzle.json" + }, + { + "name": "0.50mm Standard @Sovol Zero 1.0 nozzle", + "sub_path": "process/0.50mm Standard @Sovol Zero 1.0 nozzle.json" + }, + { + "name": "0.56mm Fast @Sovol Zero 0.8 nozzle", + "sub_path": "process/0.56mm Fast @Sovol Zero 0.8 nozzle.json" + }, + { + "name": "0.70mm Fast @Sovol Zero 1.0 nozzle", + "sub_path": "process/0.70mm Fast @Sovol Zero 1.0 nozzle.json" } ], "filament_list": [ @@ -249,6 +313,10 @@ "name": "Generic PETG @Sovol Zero", "sub_path": "filament/Generic PETG @Sovol Zero.json" }, + { + "name": "Generic PETG @Sovol Zero Hardened Steel nozzle", + "sub_path": "filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json" + }, { "name": "Generic PLA @Sovol SV06 ACE", "sub_path": "filament/Generic PLA @Sovol SV06 ACE.json" @@ -277,6 +345,14 @@ "name": "Generic PLA @Sovol Zero", "sub_path": "filament/Generic PLA @Sovol Zero.json" }, + { + "name": "Generic PLA @Sovol Zero Hardened Steel nozzle", + "sub_path": "filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json" + }, + { + "name": "Generic PLA SPEEDBENCHY @Sovol Zero", + "sub_path": "filament/Generic PLA SPEEDBENCHY @Sovol Zero.json" + }, { "name": "Generic PLA Silk @Sovol SV08 MAX", "sub_path": "filament/Generic PLA Silk @Sovol SV08 MAX.json" @@ -285,6 +361,10 @@ "name": "Generic PLA Silk @Sovol Zero", "sub_path": "filament/Generic PLA Silk @Sovol Zero.json" }, + { + "name": "Generic PLA Silk @Sovol Zero Hardened Steel nozzle", + "sub_path": "filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json" + }, { "name": "Generic TPU @Sovol SV06 ACE", "sub_path": "filament/Generic TPU @Sovol SV06 ACE.json" @@ -312,18 +392,6 @@ { "name": "SUNLU PETG @Sovol SV08 MAX", "sub_path": "filament/SUNLU PETG @Sovol SV08 MAX.json" - }, - { - "name": "Sovol Zero PETG HS Nozzle", - "sub_path": "filament/Sovol Zero PETG HS Nozzle.json" - }, - { - "name": "Sovol Zero PLA Basic HS Nozzle", - "sub_path": "filament/Sovol Zero PLA Basic HS Nozzle.json" - }, - { - "name": "Sovol Zero PLA Silk HS Nozzle", - "sub_path": "filament/Sovol Zero PLA Silk HS Nozzle.json" } ], "machine_list": [ @@ -415,9 +483,45 @@ "name": "Sovol SV08 MAX 0.8 nozzle", "sub_path": "machine/Sovol SV08 MAX 0.8 nozzle.json" }, + { + "name": "Sovol Zero 0.2 nozzle", + "sub_path": "machine/Sovol Zero 0.2 nozzle.json" + }, { "name": "Sovol Zero 0.4 nozzle", "sub_path": "machine/Sovol Zero 0.4 nozzle.json" + }, + { + "name": "Sovol Zero 0.6 nozzle", + "sub_path": "machine/Sovol Zero 0.6 nozzle.json" + }, + { + "name": "Sovol Zero 0.8 nozzle", + "sub_path": "machine/Sovol Zero 0.8 nozzle.json" + }, + { + "name": "Sovol Zero 1.0 nozzle", + "sub_path": "machine/Sovol Zero 1.0 nozzle.json" + }, + { + "name": "Sovol Zero 0.2 Hardened Steel nozzle", + "sub_path": "machine/Sovol Zero 0.2 Hardened Steel nozzle.json" + }, + { + "name": "Sovol Zero 0.4 Hardened Steel nozzle", + "sub_path": "machine/Sovol Zero 0.4 Hardened Steel nozzle.json" + }, + { + "name": "Sovol Zero 0.6 Hardened Steel nozzle", + "sub_path": "machine/Sovol Zero 0.6 Hardened Steel nozzle.json" + }, + { + "name": "Sovol Zero 0.8 Hardened Steel nozzle", + "sub_path": "machine/Sovol Zero 0.8 Hardened Steel nozzle.json" + }, + { + "name": "Sovol Zero 1.0 Hardened Steel nozzle", + "sub_path": "machine/Sovol Zero 1.0 Hardened Steel nozzle.json" } ] } diff --git a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 ACE.json b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 ACE.json index 49b26d498a..67e7edc5b0 100644 --- a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 ACE.json +++ b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic ABS @Sovol SV06 ACE", - "inherits": "Generic ABS @System", "renamed_from": "Sovol SV06 ACE ABS", + "inherits": "Generic ABS @System", "from": "system", "setting_id": "exjBdPPCgk53gipu", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 Plus ACE.json b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 Plus ACE.json index 905ee2bda0..2ea4473855 100644 --- a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 Plus ACE.json +++ b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV06 Plus ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic ABS @Sovol SV06 Plus ACE", - "inherits": "Generic ABS @System", "renamed_from": "Sovol SV06 Plus ACE ABS", + "inherits": "Generic ABS @System", "from": "system", "setting_id": "sg9HXvKEoKD4pw7v", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08 MAX.json index 8532e5bee0..5c5e0353dd 100644 --- a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08 MAX.json @@ -1,10 +1,13 @@ { "type": "filament", - "setting_id": "7julgReKEcp5tg0d", "name": "Generic ABS @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic ABS @System", + "from": "system", + "setting_id": "7julgReKEcp5tg0d", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08.json b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08.json index e690ee88e5..204288affc 100644 --- a/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08.json +++ b/resources/profiles/Sovol/filament/Generic ABS @Sovol SV08.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic ABS @Sovol SV08", - "inherits": "Generic ABS @System", "renamed_from": "Sovol SV08 ABS", + "inherits": "Generic ABS @System", "from": "system", "setting_id": "aZx3ePr3Id1jPJG9", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic ABS @Sovol Zero.json b/resources/profiles/Sovol/filament/Generic ABS @Sovol Zero.json index 3b737e2a18..7c24b7a0aa 100644 --- a/resources/profiles/Sovol/filament/Generic ABS @Sovol Zero.json +++ b/resources/profiles/Sovol/filament/Generic ABS @Sovol Zero.json @@ -1,10 +1,11 @@ { "type": "filament", "name": "Generic ABS @Sovol Zero", - "inherits": "Generic ABS @System", "renamed_from": "Sovol Zero ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "g6sSyyIFYJUzlXsp", + "filament_id": "OFY9muEs", "instantiation": "true", "filament_flow_ratio": [ "0.98" @@ -73,6 +74,39 @@ "0" ], "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.8 nozzle", + "Sovol Zero 1.0 nozzle", + "Sovol Zero 0.2 Hardened Steel nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ], + "cool_plate_temp": [ + "80" + ], + "eng_plate_temp": [ + "80" + ], + "textured_plate_temp": [ + "80" + ], + "cool_plate_temp_initial_layer": [ + "80" + ], + "eng_plate_temp_initial_layer": [ + "80" + ], + "textured_plate_temp_initial_layer": [ + "80" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_density": [ + "1.10" ] } diff --git a/resources/profiles/Sovol/filament/Generic PC @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/Generic PC @Sovol SV08 MAX.json index 242c320a7d..4df49482b1 100644 --- a/resources/profiles/Sovol/filament/Generic PC @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/Generic PC @Sovol SV08 MAX.json @@ -1,10 +1,13 @@ { "type": "filament", - "setting_id": "UPoqjanrvN173sVS", "name": "Generic PC @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic PC @System", + "from": "system", + "setting_id": "UPoqjanrvN173sVS", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PC @Sovol Zero.json b/resources/profiles/Sovol/filament/Generic PC @Sovol Zero.json index dd0eb60594..ad8e26864c 100644 --- a/resources/profiles/Sovol/filament/Generic PC @Sovol Zero.json +++ b/resources/profiles/Sovol/filament/Generic PC @Sovol Zero.json @@ -1,10 +1,11 @@ { "type": "filament", "name": "Generic PC @Sovol Zero", - "inherits": "Generic PC @System", "renamed_from": "Sovol Zero PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "yRKCiPMN6fxibcyg", + "filament_id": "OFLakOUI", "instantiation": "true", "filament_flow_ratio": [ "0.98" @@ -13,7 +14,16 @@ "21" ], "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.8 nozzle", + "Sovol Zero 1.0 nozzle", + "Sovol Zero 0.2 Hardened Steel nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" ], "nozzle_temperature_initial_layer": [ "290" @@ -51,7 +61,9 @@ "slow_down_min_speed": [ "10" ], - "dont_slow_down_outer_wall": "0", + "dont_slow_down_outer_wall": [ + "0" + ], "overhang_fan_speed": [ "20" ], @@ -61,8 +73,19 @@ "temperature_vitrification": [ "60" ], - "additional_cooling_fan_speed": "0", - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "50", - "complete_print_exhaust_fan_speed": "50" + "additional_cooling_fan_speed": [ + "0" + ], + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "50" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ] } diff --git a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 ACE.json b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 ACE.json index acb2c90316..31097dc51f 100644 --- a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 ACE.json +++ b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PETG @Sovol SV06 ACE", - "inherits": "Generic PETG @System", "renamed_from": "Sovol SV06 ACE PETG", + "inherits": "Generic PETG @System", "from": "system", "setting_id": "p8fGWNVkT6n5Dv9P", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 Plus ACE.json b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 Plus ACE.json index 5c2dfeff98..11188b88a4 100644 --- a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 Plus ACE.json +++ b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV06 Plus ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PETG @Sovol SV06 Plus ACE", - "inherits": "Generic PETG @System", "renamed_from": "Sovol SV06 Plus ACE PETG", + "inherits": "Generic PETG @System", "from": "system", "setting_id": "I7IzLMYw7iDUUJwc", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08 MAX.json index 550d30ccf5..08de72fcce 100644 --- a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08 MAX.json @@ -1,10 +1,13 @@ { "type": "filament", - "setting_id": "ib7AtR3tQ2dSrFNP", "name": "Generic PETG @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "ib7AtR3tQ2dSrFNP", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08.json b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08.json index c637897b10..4e9335e97b 100644 --- a/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08.json +++ b/resources/profiles/Sovol/filament/Generic PETG @Sovol SV08.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PETG @Sovol SV08", - "inherits": "Generic PETG @System", "renamed_from": "Sovol SV08 PETG", + "inherits": "Generic PETG @System", "from": "system", "setting_id": "7vDZKIKJW5fy1EGG", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json b/resources/profiles/Sovol/filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json new file mode 100644 index 0000000000..1ea9ae00e6 --- /dev/null +++ b/resources/profiles/Sovol/filament/Generic PETG @Sovol Zero Hardened Steel nozzle.json @@ -0,0 +1,116 @@ +{ + "type": "filament", + "name": "Generic PETG @Sovol Zero Hardened Steel nozzle", + "renamed_from": "Sovol Zero PETG HS Nozzle", + "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "d9QbCESNz3ZLU6eu", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.048" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "nozzle_temperature_initial_layer": [ + "265" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_range_low": [ + "230" + ], + "nozzle_temperature_range_high": [ + "280" + ], + "hot_plate_temp": [ + "85" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "fan_min_speed": [ + "10" + ], + "fan_max_speed": [ + "40" + ], + "fan_cooling_layer_time": [ + "50" + ], + "full_fan_speed_layer": [ + "3" + ], + "slow_down_layer_time": [ + "10" + ], + "slow_down_min_speed": [ + "10" + ], + "overhang_fan_speed": [ + "70" + ], + "overhang_fan_threshold": [ + "10%" + ], + "temperature_vitrification": [ + "60" + ], + "close_fan_the_first_x_layers": [ + "1" + ], + "filament_retraction_length": [ + "0.5" + ], + "filament_z_hop": [ + "0.4" + ], + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "50" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], + "compatible_printers": [ + "Sovol Zero 0.2 Hardened Steel nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ], + "cool_plate_temp": [ + "85" + ], + "eng_plate_temp": [ + "85" + ], + "textured_plate_temp": [ + "85" + ], + "cool_plate_temp_initial_layer": [ + "85" + ], + "eng_plate_temp_initial_layer": [ + "85" + ], + "textured_plate_temp_initial_layer": [ + "85" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Sovol/filament/Generic PETG @Sovol Zero.json b/resources/profiles/Sovol/filament/Generic PETG @Sovol Zero.json index a223521d25..5972184f6c 100644 --- a/resources/profiles/Sovol/filament/Generic PETG @Sovol Zero.json +++ b/resources/profiles/Sovol/filament/Generic PETG @Sovol Zero.json @@ -1,16 +1,21 @@ { "type": "filament", "name": "Generic PETG @Sovol Zero", - "inherits": "Generic PETG @System", "renamed_from": "Sovol Zero PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "i4OW2eAtXOKdtVNj", + "filament_id": "OFYPdQJh", "instantiation": "true", "filament_flow_ratio": [ "1.0348" ], - "enable_pressure_advance": "1", - "pressure_advance": "0.046", + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.046" + ], "filament_max_volumetric_speed": [ "15" ], @@ -68,10 +73,44 @@ "filament_z_hop": [ "0.4" ], - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "50", - "complete_print_exhaust_fan_speed": "50", + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "50" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.8 nozzle", + "Sovol Zero 1.0 nozzle" + ], + "cool_plate_temp": [ + "85" + ], + "eng_plate_temp": [ + "85" + ], + "textured_plate_temp": [ + "85" + ], + "cool_plate_temp_initial_layer": [ + "85" + ], + "eng_plate_temp_initial_layer": [ + "85" + ], + "textured_plate_temp_initial_layer": [ + "85" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_start_gcode": [ + "; filament start gcode\n" ] } diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 ACE.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 ACE.json index de9e7cde47..41751ee0ad 100644 --- a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 ACE.json +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA @Sovol SV06 ACE", - "inherits": "Generic PLA @System", "renamed_from": "Sovol SV06 ACE PLA", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "UEEwpetmmxpxM4vV", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 Plus ACE.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 Plus ACE.json index 8dcb4a6d2d..8b08b7ad57 100644 --- a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 Plus ACE.json +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV06 Plus ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA @Sovol SV06 Plus ACE", - "inherits": "Generic PLA @System", "renamed_from": "Sovol SV06 Plus ACE PLA", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "yzv5Kwe3OivHxNUI", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV07.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV07.json index 42210ef9c0..934a9efe2d 100644 --- a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV07.json +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV07.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA @Sovol SV07", - "inherits": "Generic PLA @System", "renamed_from": "Sovol SV07 PLA", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "sNGno8XCSsgmwjvH", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 0.2 nozzle.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 0.2 nozzle.json index be23b183ab..4a28282063 100644 --- a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 0.2 nozzle.json +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 0.2 nozzle.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA @Sovol SV08 0.2 nozzle", - "inherits": "Generic PLA @System", "renamed_from": "Sovol SV08 PLA @SV08 0.2 nozzle;Sovol SV08 PLA SV08 0.2 nozzle", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "W7oQNGWqiPMUlzhw", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 MAX.json index b29bc1b069..d0428319af 100644 --- a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08 MAX.json @@ -1,10 +1,13 @@ { "type": "filament", - "setting_id": "kcFykpuuxMy7KwNu", "name": "Generic PLA @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "kcFykpuuxMy7KwNu", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08.json index c124edee31..12668251e9 100644 --- a/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08.json +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol SV08.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic PLA @Sovol SV08", - "inherits": "Generic PLA @System", "renamed_from": "Sovol SV08 PLA", + "inherits": "Generic PLA @System", "from": "system", "setting_id": "4fSYcvbFXNRHnlEw", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json new file mode 100644 index 0000000000..776452aed8 --- /dev/null +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol Zero Hardened Steel nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "name": "Generic PLA @Sovol Zero Hardened Steel nozzle", + "renamed_from": "Sovol Zero PLA Basic HS Nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "nZgETe4CTpicEjQX", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "filament_flow_ratio": [ + "1.0348" + ], + "filament_max_volumetric_speed": [ + "21" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.03" + ], + "compatible_printers": [ + "Sovol Zero 0.2 Hardened Steel nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "fan_min_speed": [ + "70" + ], + "fan_max_speed": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "full_fan_speed_layer": [ + "3" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "10" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "temperature_vitrification": [ + "60" + ], + "additional_cooling_fan_speed": [ + "75%" + ], + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "80%" + ], + "complete_print_exhaust_fan_speed": [ + "80%" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Sovol/filament/Generic PLA @Sovol Zero.json b/resources/profiles/Sovol/filament/Generic PLA @Sovol Zero.json index 131867f6b8..e3f4b92ac9 100644 --- a/resources/profiles/Sovol/filament/Generic PLA @Sovol Zero.json +++ b/resources/profiles/Sovol/filament/Generic PLA @Sovol Zero.json @@ -1,21 +1,24 @@ { "type": "filament", "name": "Generic PLA @Sovol Zero", - "inherits": "Generic PLA @System", "renamed_from": "Sovol Zero PLA Basic", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "NNDerIjh7qtuh1I3", + "filament_id": "OFDSrzZ8", "instantiation": "true", "filament_flow_ratio": [ "0.98" ], "filament_max_volumetric_speed": [ - "21" + "25" ], - "enable_pressure_advance": "1", - "pressure_advance": "0.032", "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.8 nozzle", + "Sovol Zero 1.0 nozzle" ], "nozzle_temperature_initial_layer": [ "230" @@ -24,28 +27,28 @@ "210" ], "nozzle_temperature_range_low": [ - "190" + "180" ], "nozzle_temperature_range_high": [ - "250" + "240" ], "hot_plate_temp": [ - "65" + "60" ], "hot_plate_temp_initial_layer": [ - "65" + "60" ], "fan_min_speed": [ - "70" + "100" ], "fan_max_speed": [ "100" ], "fan_cooling_layer_time": [ - "80" + "60" ], "full_fan_speed_layer": [ - "3" + "2" ], "slow_down_layer_time": [ "5" @@ -53,18 +56,43 @@ "slow_down_min_speed": [ "10" ], - "dont_slow_down_outer_wall": "0", "overhang_fan_speed": [ "100" ], "overhang_fan_threshold": [ - "50%" + "10%" ], "temperature_vitrification": [ + "50" + ], + "filament_z_hop": [ + "0.4" + ], + "filament_retraction_length": [ + "0.4" + ], + "filament_diameter": [ + "1.75" + ], + "cool_plate_temp": [ "60" ], - "additional_cooling_fan_speed": "75%", - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "80%", - "complete_print_exhaust_fan_speed": "80%" + "eng_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/Sovol/filament/Generic PLA SPEEDBENCHY @Sovol Zero.json b/resources/profiles/Sovol/filament/Generic PLA SPEEDBENCHY @Sovol Zero.json new file mode 100644 index 0000000000..c55bf2516d --- /dev/null +++ b/resources/profiles/Sovol/filament/Generic PLA SPEEDBENCHY @Sovol Zero.json @@ -0,0 +1,118 @@ +{ + "type": "filament", + "name": "Generic PLA SPEEDBENCHY @Sovol Zero", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "MC2InZ7iKDjIGike", + "filament_id": "OFIUkWYN", + "instantiation": "true", + "filament_flow_ratio": [ + "1" + ], + "filament_max_volumetric_speed": [ + "50" + ], + "compatible_printers": [ + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature": [ + "225" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.032" + ], + "fan_min_speed": [ + "100" + ], + "fan_max_speed": [ + "100" + ], + "fan_cooling_layer_time": [ + "30" + ], + "full_fan_speed_layer": [ + "3" + ], + "slow_down_layer_time": [ + "1.7" + ], + "slow_down_min_speed": [ + "40" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "75%" + ], + "additional_cooling_fan_speed": [ + "100" + ], + "filament_z_hop": [ + "0" + ], + "filament_retraction_length": [ + "0.35" + ], + "filament_retraction_speed": [ + "90" + ], + "filament_deretraction_speed": [ + "90" + ], + "filament_retract_before_wipe": [ + "0%" + ], + "filament_wipe_distance": [ + "2" + ], + "filament_retract_when_changing_layer": [ + "0" + ], + "filament_diameter": [ + "1.75" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ], + "temperature_vitrification": [ + "100" + ] +} diff --git a/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol SV08 MAX.json index ac456a82ee..f3e1e1cd82 100644 --- a/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol SV08 MAX.json @@ -1,11 +1,14 @@ { "type": "filament", - "filament_id": "OFesA6rF", - "setting_id": "WAHQZmwHoS4WjoTx", "name": "Generic PLA Silk @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "WAHQZmwHoS4WjoTx", + "filament_id": "OFesA6rF", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json b/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json new file mode 100644 index 0000000000..52ecbd08de --- /dev/null +++ b/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero Hardened Steel nozzle.json @@ -0,0 +1,110 @@ +{ + "type": "filament", + "name": "Generic PLA Silk @Sovol Zero Hardened Steel nozzle", + "renamed_from": "Sovol Zero PLA Silk HS Nozzle", + "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "LA8X1RsMdV2xNT1o", + "filament_id": "OFesA6rF", + "instantiation": "true", + "filament_flow_ratio": [ + "0.98" + ], + "filament_max_volumetric_speed": [ + "15" + ], + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.027" + ], + "compatible_printers": [ + "Sovol Zero 0.2 Hardened Steel nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ], + "nozzle_temperature_initial_layer": [ + "245" + ], + "nozzle_temperature": [ + "230" + ], + "nozzle_temperature_range_low": [ + "190" + ], + "nozzle_temperature_range_high": [ + "250" + ], + "hot_plate_temp": [ + "65" + ], + "hot_plate_temp_initial_layer": [ + "65" + ], + "fan_min_speed": [ + "70" + ], + "fan_max_speed": [ + "100" + ], + "fan_cooling_layer_time": [ + "80" + ], + "full_fan_speed_layer": [ + "3" + ], + "slow_down_layer_time": [ + "5" + ], + "slow_down_min_speed": [ + "10" + ], + "dont_slow_down_outer_wall": [ + "0" + ], + "overhang_fan_speed": [ + "100" + ], + "overhang_fan_threshold": [ + "50%" + ], + "temperature_vitrification": [ + "60" + ], + "additional_cooling_fan_speed": [ + "75%" + ], + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "80%" + ], + "complete_print_exhaust_fan_speed": [ + "80%" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] +} diff --git a/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero.json b/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero.json index 5b46a92d64..ecbebcfc40 100644 --- a/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero.json +++ b/resources/profiles/Sovol/filament/Generic PLA Silk @Sovol Zero.json @@ -1,27 +1,30 @@ { "type": "filament", "name": "Generic PLA Silk @Sovol Zero", - "inherits": "Generic PLA Silk @System", "renamed_from": "Sovol Zero PLA Silk", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "Se2yKerHRStYtWf5", + "filament_id": "OFesA6rF", "instantiation": "true", - "filament_multitool_ramming_flow": [ - "20" - ], - "filament_retraction_length": [ - "nil" - ], "filament_flow_ratio": [ "0.98" ], "filament_max_volumetric_speed": [ "15" ], - "enable_pressure_advance": "1", - "pressure_advance": "0.029", + "enable_pressure_advance": [ + "1" + ], + "pressure_advance": [ + "0.029" + ], "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.8 nozzle", + "Sovol Zero 1.0 nozzle" ], "nozzle_temperature_initial_layer": [ "245" @@ -59,7 +62,9 @@ "slow_down_min_speed": [ "10" ], - "dont_slow_down_outer_wall": "0", + "dont_slow_down_outer_wall": [ + "0" + ], "overhang_fan_speed": [ "100" ], @@ -69,8 +74,43 @@ "temperature_vitrification": [ "60" ], - "additional_cooling_fan_speed": "75%", - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "80%", - "complete_print_exhaust_fan_speed": "80%" + "additional_cooling_fan_speed": [ + "75%" + ], + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "80%" + ], + "complete_print_exhaust_fan_speed": [ + "80%" + ], + "filament_multitool_ramming_flow": [ + "20" + ], + "filament_retraction_length": [ + "nil" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_start_gcode": [ + "; filament start gcode\n" + ] } diff --git a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 ACE.json b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 ACE.json index ba653af37d..e588e91bc2 100644 --- a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 ACE.json +++ b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic TPU @Sovol SV06 ACE", - "inherits": "Generic TPU @System", "renamed_from": "Sovol SV06 ACE TPU", + "inherits": "Generic TPU @System", "from": "system", "setting_id": "jBAo7stLaaQxKFsp", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 Plus ACE.json b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 Plus ACE.json index 9c9490b863..311724601e 100644 --- a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 Plus ACE.json +++ b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV06 Plus ACE.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic TPU @Sovol SV06 Plus ACE", - "inherits": "Generic TPU @System", "renamed_from": "Sovol SV06 Plus ACE TPU", + "inherits": "Generic TPU @System", "from": "system", "setting_id": "MUXz0JSHdT66Mti1", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08 MAX.json index a65978a50e..fd3891ff9c 100644 --- a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08 MAX.json @@ -1,10 +1,13 @@ { "type": "filament", - "setting_id": "hQByQ7FIhAiytli8", "name": "Generic TPU @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic TPU @System", + "from": "system", + "setting_id": "hQByQ7FIhAiytli8", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08.json b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08.json index bf412d77d8..d8cbcf07b7 100644 --- a/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08.json +++ b/resources/profiles/Sovol/filament/Generic TPU @Sovol SV08.json @@ -1,11 +1,14 @@ { "type": "filament", "name": "Generic TPU @Sovol SV08", - "inherits": "Generic TPU @System", "renamed_from": "Sovol SV08 TPU", + "inherits": "Generic TPU @System", "from": "system", "setting_id": "vFPYMoNvgjn1aSKA", "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_flow_ratio": [ "0.98" ], diff --git a/resources/profiles/Sovol/filament/Generic TPU @Sovol Zero.json b/resources/profiles/Sovol/filament/Generic TPU @Sovol Zero.json index 8c7c18c523..fb21ee721b 100644 --- a/resources/profiles/Sovol/filament/Generic TPU @Sovol Zero.json +++ b/resources/profiles/Sovol/filament/Generic TPU @Sovol Zero.json @@ -1,10 +1,11 @@ { "type": "filament", "name": "Generic TPU @Sovol Zero", - "inherits": "Generic TPU @System", "renamed_from": "Sovol Zero TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "MlY6WQ41FE8zDPSV", + "filament_id": "OFgbpcy9", "instantiation": "true", "filament_flow_ratio": [ "0.98" @@ -60,11 +61,55 @@ "filament_z_hop": [ "0.4" ], - "additional_cooling_fan_speed": "50", - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "100", - "complete_print_exhaust_fan_speed": "50", + "additional_cooling_fan_speed": [ + "50" + ], + "activate_air_filtration": [ + "1" + ], + "during_print_exhaust_fan_speed": [ + "100" + ], + "complete_print_exhaust_fan_speed": [ + "50" + ], "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.8 nozzle", + "Sovol Zero 1.0 nozzle", + "Sovol Zero 0.2 Hardened Steel nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ], + "cool_plate_temp": [ + "60" + ], + "eng_plate_temp": [ + "60" + ], + "textured_plate_temp": [ + "60" + ], + "cool_plate_temp_initial_layer": [ + "55" + ], + "eng_plate_temp_initial_layer": [ + "55" + ], + "textured_plate_temp_initial_layer": [ + "55" + ], + "filament_end_gcode": [ + "; filament end gcode \n" + ], + "filament_retraction_length": [ + "nil" + ], + "filament_start_gcode": [ + "; filament start gcode\n" ] } diff --git a/resources/profiles/Sovol/filament/Polymaker PETG @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/Polymaker PETG @Sovol SV08 MAX.json index f56ca13525..f45ddf38f5 100644 --- a/resources/profiles/Sovol/filament/Polymaker PETG @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/Polymaker PETG @Sovol SV08 MAX.json @@ -1,11 +1,14 @@ { "type": "filament", - "filament_id": "OF6H51Xx", - "setting_id": "JBFKMaFtd7kO8Ksq", "name": "Polymaker PETG @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "JBFKMaFtd7kO8Ksq", + "filament_id": "OF6H51Xx", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "Polymaker" ], diff --git a/resources/profiles/Sovol/filament/SUNLU PETG @Sovol SV08 MAX.json b/resources/profiles/Sovol/filament/SUNLU PETG @Sovol SV08 MAX.json index 1ff8f57fac..6512adc3b8 100644 --- a/resources/profiles/Sovol/filament/SUNLU PETG @Sovol SV08 MAX.json +++ b/resources/profiles/Sovol/filament/SUNLU PETG @Sovol SV08 MAX.json @@ -1,11 +1,14 @@ { "type": "filament", - "filament_id": "OF2GCW1l", - "setting_id": "x68SPQCqVacBSGd5", "name": "SUNLU PETG @Sovol SV08 MAX", - "from": "system", - "instantiation": "true", "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "x68SPQCqVacBSGd5", + "filament_id": "OF2GCW1l", + "instantiation": "true", + "filament_extruder_variant": [ + "Direct Drive Standard" + ], "filament_vendor": [ "SUNLU" ], diff --git a/resources/profiles/Sovol/filament/Sovol Zero PLA Basic HS Nozzle.json b/resources/profiles/Sovol/filament/Sovol Zero PLA Basic HS Nozzle.json deleted file mode 100644 index 6dfb630e0a..0000000000 --- a/resources/profiles/Sovol/filament/Sovol Zero PLA Basic HS Nozzle.json +++ /dev/null @@ -1,70 +0,0 @@ -{ - "type": "filament", - "name": "Sovol Zero PLA Basic HS Nozzle", - "inherits": "Generic PLA @System", - "from": "system", - "setting_id": "i9wDnSEIrOBPbOZl", - "filament_id": "OFzB4uOs", - "instantiation": "true", - "filament_flow_ratio": [ - "1.0348" - ], - "filament_max_volumetric_speed": [ - "21" - ], - "enable_pressure_advance": "1", - "pressure_advance": "0.03", - "compatible_printers": [ - "Sovol Zero 0.4 nozzle" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "fan_min_speed": [ - "70" - ], - "fan_max_speed": [ - "100" - ], - "fan_cooling_layer_time": [ - "80" - ], - "full_fan_speed_layer": [ - "3" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "10" - ], - "dont_slow_down_outer_wall": "0", - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "temperature_vitrification": [ - "60" - ], - "additional_cooling_fan_speed": "75%", - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "80%", - "complete_print_exhaust_fan_speed": "80%" -} diff --git a/resources/profiles/Sovol/filament/Sovol Zero PLA Silk HS Nozzle.json b/resources/profiles/Sovol/filament/Sovol Zero PLA Silk HS Nozzle.json deleted file mode 100644 index 97e4050b8c..0000000000 --- a/resources/profiles/Sovol/filament/Sovol Zero PLA Silk HS Nozzle.json +++ /dev/null @@ -1,70 +0,0 @@ -{ - "type": "filament", - "name": "Sovol Zero PLA Silk HS Nozzle", - "inherits": "Generic PLA @System", - "from": "system", - "setting_id": "XxEJBNFLRltR2Xwn", - "filament_id": "OFAO9A7J", - "instantiation": "true", - "filament_flow_ratio": [ - "0.98" - ], - "filament_max_volumetric_speed": [ - "15" - ], - "enable_pressure_advance": "1", - "pressure_advance": "0.027", - "compatible_printers": [ - "Sovol Zero 0.4 nozzle" - ], - "nozzle_temperature_initial_layer": [ - "245" - ], - "nozzle_temperature": [ - "230" - ], - "nozzle_temperature_range_low": [ - "190" - ], - "nozzle_temperature_range_high": [ - "250" - ], - "hot_plate_temp": [ - "65" - ], - "hot_plate_temp_initial_layer": [ - "65" - ], - "fan_min_speed": [ - "70" - ], - "fan_max_speed": [ - "100" - ], - "fan_cooling_layer_time": [ - "80" - ], - "full_fan_speed_layer": [ - "3" - ], - "slow_down_layer_time": [ - "5" - ], - "slow_down_min_speed": [ - "10" - ], - "dont_slow_down_outer_wall": "0", - "overhang_fan_speed": [ - "100" - ], - "overhang_fan_threshold": [ - "50%" - ], - "temperature_vitrification": [ - "60" - ], - "additional_cooling_fan_speed": "75%", - "activate_air_filtration": "1", - "during_print_exhaust_fan_speed": "80%", - "complete_print_exhaust_fan_speed": "80%" -} diff --git a/resources/profiles/Sovol/machine/Sovol SV01 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV01 0.4 nozzle.json index fe6d0dcd96..234b872dc3 100644 --- a/resources/profiles/Sovol/machine/Sovol SV01 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV01 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "OrYBz2bwPIXQ0QZa", "name": "Sovol SV01 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "OrYBz2bwPIXQ0QZa", + "instantiation": "true", "printer_model": "Sovol SV01", "default_print_profile": "0.20mm Standard @Sovol SV01", "nozzle_diameter": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json index 65f382b90e..50197d701e 100644 --- a/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV02 0.4 nozzle.json @@ -26,65 +26,98 @@ "0x240" ], "printable_height": "300", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "machine_max_acceleration_extruding": [ + "500", + "500", "500", "500" ], "machine_max_acceleration_retracting": [ + "1000", + "1000", "1000", "1000" ], "machine_max_acceleration_travel": [ + "1500", + "1250", "1500", "1250" ], "machine_max_acceleration_x": [ + "500", + "500", "500", "500" ], "machine_max_acceleration_y": [ + "500", + "500", "500", "500" ], "machine_max_acceleration_z": [ + "100", + "100", "100", "100" ], "machine_max_speed_e": [ + "60", + "60", "60", "60" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "10", + "10", "10", "10" ], "machine_max_jerk_e": [ + "5", + "5", "5", "5" ], "machine_max_jerk_x": [ + "8", + "8", "8", "8" ], "machine_max_jerk_y": [ + "8", + "8", "8", "8" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], "machine_max_junction_deviation": [ + "0.06", + "0", "0.06", "0" ], diff --git a/resources/profiles/Sovol/machine/Sovol SV06 0.4 High-Speed nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 0.4 High-Speed nozzle.json index 32726c753f..90d6ceb677 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 0.4 High-Speed nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 0.4 High-Speed nozzle.json @@ -69,7 +69,6 @@ "10" ], "z_hop": [ - "0.4", "0.4" ], "max_layer_height": [ @@ -77,35 +76,34 @@ "0.32" ], "retract_lift_below": [ - "248", "248" ], "retraction_speed": [ - "35", "35" ], "deretraction_speed": [ - "35", "35" ], "wipe_distance": [ - "2", "2" ], "retract_length_toolchange": [ - "1", "1" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "5", "5" ], "machine_max_jerk_y": [ + "5", "5" ], "machine_max_jerk_z": [ + "0.4", "0.4" ], "before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0", diff --git a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.2 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.2 nozzle.json index 329a91b001..da36449a58 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.2 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.2 nozzle.json @@ -85,15 +85,12 @@ "0.16" ], "retract_lift_below": [ - "248", "248" ], "retraction_speed": [ - "35", "35" ], "deretraction_speed": [ - "35", "35" ], "wipe_distance": [ @@ -103,19 +100,22 @@ "100%" ], "retract_length_toolchange": [ - "2", "2" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "gcode_flavor": "klipper", diff --git a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.4 nozzle.json index c9f054af98..7cb3e5e232 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.4 nozzle.json @@ -85,15 +85,12 @@ "0.32" ], "retract_lift_below": [ - "248", "248" ], "retraction_speed": [ - "40", "40" ], "deretraction_speed": [ - "40", "40" ], "wipe_distance": [ @@ -103,19 +100,22 @@ "100%" ], "retract_length_toolchange": [ - "2", "2" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "gcode_flavor": "klipper", diff --git a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.6 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.6 nozzle.json index e7bc84ee1a..53068f8999 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.6 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.6 nozzle.json @@ -85,15 +85,12 @@ "0.48" ], "retract_lift_below": [ - "248", "248" ], "retraction_speed": [ - "45", "45" ], "deretraction_speed": [ - "45", "45" ], "wipe_distance": [ @@ -103,19 +100,22 @@ "100%" ], "retract_length_toolchange": [ - "2", "2" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "gcode_flavor": "klipper", diff --git a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.8 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.8 nozzle.json index 6c555ef1d5..49c6077ee8 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.8 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 ACE 0.8 nozzle.json @@ -85,15 +85,12 @@ "0.64" ], "retract_lift_below": [ - "248", "248" ], "retraction_speed": [ - "45", "45" ], "deretraction_speed": [ - "45", "45" ], "wipe_distance": [ @@ -103,19 +100,22 @@ "100%" ], "retract_length_toolchange": [ - "2", "2" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "gcode_flavor": "klipper", diff --git a/resources/profiles/Sovol/machine/Sovol SV06 Plus ACE 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV06 Plus ACE 0.4 nozzle.json index 5624a3c07f..80053de960 100644 --- a/resources/profiles/Sovol/machine/Sovol SV06 Plus ACE 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV06 Plus ACE 0.4 nozzle.json @@ -83,15 +83,12 @@ "0.32" ], "retract_lift_below": [ - "343", "343" ], "retraction_speed": [ - "40", "40" ], "deretraction_speed": [ - "40", "40" ], "wipe_distance": [ @@ -101,19 +98,22 @@ "100%" ], "retract_length_toolchange": [ - "2", "2" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "gcode_flavor": "klipper", diff --git a/resources/profiles/Sovol/machine/Sovol SV07 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV07 0.4 nozzle.json index 513c7a3bca..dc8d999f2e 100644 --- a/resources/profiles/Sovol/machine/Sovol SV07 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV07 0.4 nozzle.json @@ -25,45 +25,59 @@ "0.8" ], "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_x": [ + "12000", "12000" ], "machine_max_acceleration_y": [ + "12000", "12000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_z": [ + "20", "20" ], "machine_max_jerk_x": [ + "9", "9" ], "machine_max_jerk_y": [ + "9", "9" ], "machine_max_jerk_z": [ + "0.25", "0.25" ], "machine_max_jerk_e": [ + "3", "3" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json index ef7b6f4986..7981ef6055 100644 --- a/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV07 Plus 0.4 nozzle.json @@ -20,6 +20,7 @@ "nozzle_type": "undefine", "auxiliary_fan": "0", "machine_max_acceleration_e": [ + "20000", "20000" ], "machine_max_acceleration_extruding": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 0.2 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV08 0.2 nozzle.json index 441616c542..c28b90b27f 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 0.2 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 0.2 nozzle.json @@ -32,48 +32,63 @@ "0.5" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "700", "700" ], "machine_max_speed_y": [ + "700", "700" ], "machine_max_speed_z": [ + "20", "20" ], "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV08 0.4 nozzle.json index 7defca131b..8997656a21 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 0.4 nozzle.json @@ -26,48 +26,63 @@ "0.5" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "700", "700" ], "machine_max_speed_y": [ + "700", "700" ], "machine_max_speed_z": [ + "20", "20" ], "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 0.6 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV08 0.6 nozzle.json index d49594b4af..1cdf784b99 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 0.6 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 0.6 nozzle.json @@ -32,48 +32,63 @@ "0.5" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "700", "700" ], "machine_max_speed_y": [ + "700", "700" ], "machine_max_speed_z": [ + "20", "20" ], "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 0.8 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV08 0.8 nozzle.json index 576ca16076..e79d65fb55 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 0.8 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 0.8 nozzle.json @@ -32,48 +32,63 @@ "0.5" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "700", "700" ], "machine_max_speed_y": [ + "700", "700" ], "machine_max_speed_z": [ + "20", "20" ], "machine_max_acceleration_e": [ + "5000", "5000" ], "machine_max_acceleration_extruding": [ + "20000", "20000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.4 nozzle.json index d71e6b448b..4c90815729 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "MIHp3VCfT1e6gMjs", "name": "Sovol SV08 MAX 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "MIHp3VCfT1e6gMjs", + "instantiation": "true", "printer_model": "Sovol SV08 MAX", "default_print_profile": "0.20mm Standard @Sovol SV08 MAX 0.4 nozzle", "printer_variant": "0.4", @@ -27,48 +27,63 @@ "0.8" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "800", "800" ], "machine_max_speed_y": [ + "800", "800" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_acceleration_e": [ + "20000", "20000" ], "machine_max_acceleration_extruding": [ + "40000", "40000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "2.5", "2.5" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.6 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.6 nozzle.json index 4972eee589..53e2873472 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.6 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "HR1xTYrAmc07KHs0", "name": "Sovol SV08 MAX 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "HR1xTYrAmc07KHs0", + "instantiation": "true", "printer_model": "Sovol SV08 MAX", "default_print_profile": "0.30mm Standard @Sovol SV08 MAX 0.6 nozzle", "printer_variant": "0.6", @@ -36,48 +36,63 @@ "0.1" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "800", "800" ], "machine_max_speed_y": [ + "800", "800" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_acceleration_e": [ + "20000", "20000" ], "machine_max_acceleration_extruding": [ + "40000", "40000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "2.5", "2.5" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.8 nozzle.json b/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.8 nozzle.json index 32511e52ca..764eb801d2 100644 --- a/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.8 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol SV08 MAX 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "8WhF31wX3mBoOqpx", "name": "Sovol SV08 MAX 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "8WhF31wX3mBoOqpx", + "instantiation": "true", "printer_model": "Sovol SV08 MAX", "default_print_profile": "0.40mm Standard @Sovol SV08 MAX 0.8 nozzle", "printer_variant": "0.8", @@ -36,48 +36,63 @@ "0.1" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "800", "800" ], "machine_max_speed_y": [ + "800", "800" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_acceleration_e": [ + "20000", "20000" ], "machine_max_acceleration_extruding": [ + "40000", "40000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "20", "20" ], "machine_max_jerk_y": [ + "20", "20" ], "machine_max_jerk_z": [ + "2.5", "2.5" ], "z_hop": [ diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.2 Hardened Steel nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.2 Hardened Steel nozzle.json new file mode 100644 index 0000000000..89ee9c1c09 --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.2 Hardened Steel nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "name": "Sovol Zero 0.2 Hardened Steel nozzle", + "inherits": "Sovol Zero 0.2 nozzle", + "from": "system", + "setting_id": "OkvEInEyzUUJzw9K", + "instantiation": "true", + "printer_model": "Sovol Zero", + "printer_variant": "0.2HS", + "nozzle_diameter": [ + "0.2" + ], + "default_filament_profile": [ + "Generic PLA @Sovol Zero Hardened Steel nozzle" + ], + "nozzle_type": [ + "hardened_steel" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.2 nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.2 nozzle.json new file mode 100644 index 0000000000..8b31824f86 --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.2 nozzle.json @@ -0,0 +1,133 @@ +{ + "type": "machine", + "name": "Sovol Zero 0.2 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "MAF2n6b8uoY92qVH", + "instantiation": "true", + "printer_model": "Sovol Zero", + "default_print_profile": "0.10mm Standard @Sovol Zero 0.2 nozzle", + "printer_variant": "0.2", + "nozzle_diameter": [ + "0.2" + ], + "min_layer_height": [ + "0.04" + ], + "max_layer_height": [ + "0.2" + ], + "retract_before_wipe": [ + "0%" + ], + "printable_area": [ + "0x0", + "152.4x0", + "152.4x152.4", + "0x152.4" + ], + "printable_height": "152.4", + "gcode_flavor": "klipper", + "retraction_length": [ + "1.8" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "1200", + "1200" + ], + "machine_max_speed_y": [ + "1200", + "1200" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "40000", + "40000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "40000", + "40000" + ], + "machine_max_acceleration_x": [ + "40000", + "40000" + ], + "machine_max_acceleration_y": [ + "40000", + "40000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "5", + "5" + ], + "machine_max_jerk_y": [ + "5", + "5" + ], + "machine_max_jerk_z": [ + "0.5", + "0.5" + ], + "z_hop": [ + "0.6" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retraction_minimum_travel": [ + "0" + ], + "retract_length_toolchange": [ + "2" + ], + "wipe": [ + "1" + ], + "wipe_distance": [ + "3" + ], + "z_hop_types": [ + "Auto Lift" + ], + "thumbnails": [ + "300x300", + "32x32" + ], + "retract_lift_below": [ + "150" + ], + "auxiliary_fan": "1", + "thumbnails_format": "PNG", + "before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n", + "machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nSTART_PRINT\nG28\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[1] - 6 > print_bed_min[1]}\nG90\nM83\nG1 E-0.5 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 5} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z1 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 4} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z5 F600\nM400\n{else}\nG90\nM83\nG1 E-0.300 Z3 F600\nG1 X{print_bed_max[1] / 3} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 Z0.3 F600\nG1 E0.300 F600\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3} Y1 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 E-0.300 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n", + "machine_end_gcode": "END_PRINT\n", + "default_filament_profile": [ + "Generic PLA @Sovol Zero" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.4 Hardened Steel nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.4 Hardened Steel nozzle.json new file mode 100644 index 0000000000..515c4cf696 --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.4 Hardened Steel nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "name": "Sovol Zero 0.4 Hardened Steel nozzle", + "inherits": "Sovol Zero 0.4 nozzle", + "from": "system", + "setting_id": "RqwHKS8MYRdoeJPi", + "instantiation": "true", + "printer_model": "Sovol Zero", + "printer_variant": "0.4HS", + "nozzle_diameter": [ + "0.4" + ], + "default_filament_profile": [ + "Generic PLA @Sovol Zero Hardened Steel nozzle" + ], + "nozzle_type": [ + "hardened_steel" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.4 nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.4 nozzle.json index a5699a9eed..5ff3a25bb5 100644 --- a/resources/profiles/Sovol/machine/Sovol Zero 0.4 nozzle.json +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.4 nozzle.json @@ -11,8 +11,14 @@ "nozzle_diameter": [ "0.4" ], + "min_layer_height": [ + "0.08" + ], + "max_layer_height": [ + "0.32" + ], "retract_before_wipe": [ - "100%" + "0%" ], "printable_area": [ "0x0", @@ -23,55 +29,70 @@ "printable_height": "152.4", "gcode_flavor": "klipper", "retraction_length": [ - "0.8" + "1.8" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "1200", "1200" ], "machine_max_speed_y": [ + "1200", "1200" ], "machine_max_speed_z": [ + "30", "30" ], "machine_max_acceleration_e": [ + "20000", "20000" ], "machine_max_acceleration_extruding": [ + "40000", "40000" ], "machine_max_acceleration_retracting": [ + "20000", "20000" ], "machine_max_acceleration_travel": [ + "40000", "40000" ], "machine_max_acceleration_x": [ + "40000", "40000" ], "machine_max_acceleration_y": [ + "40000", "40000" ], "machine_max_acceleration_z": [ + "1000", "1000" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "5", "5" ], "machine_max_jerk_y": [ + "5", "5" ], "machine_max_jerk_z": [ + "0.5", "0.5" ], "z_hop": [ - "0.4" + "0.6" ], "retraction_speed": [ "40" @@ -89,7 +110,7 @@ "1" ], "wipe_distance": [ - "2" + "3" ], "z_hop_types": [ "Auto Lift" @@ -104,7 +125,7 @@ "auxiliary_fan": "1", "thumbnails_format": "PNG", "before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n", - "machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nSTART_PRINT\nG28\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[1] - 6 > print_bed_min[1]}\nG90\nM83\nG1 E-0.5 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 5} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{endif}\nG1 E-0.300 F600\nG0 Z1 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 4} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{endif}\nG1 E-0.300 F600\nG0 Z5 F600\nM400\n{else}\nG90\nM83\nG1 E-0.300 Z3 F600\nG1 X{print_bed_max[1] / 3} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 Z0.3 F600\nG1 E0.300 F600\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3} Y1 F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 E-0.300 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n", + "machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nSTART_PRINT\nG28\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[1] - 6 > print_bed_min[1]}\nG90\nM83\nG1 E-0.5 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 5} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z1 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 4} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z5 F600\nM400\n{else}\nG90\nM83\nG1 E-0.300 Z3 F600\nG1 X{print_bed_max[1] / 3} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 Z0.3 F600\nG1 E0.300 F600\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3} Y1 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 E-0.300 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n", "machine_end_gcode": "END_PRINT\n", "default_filament_profile": [ "Generic PLA @Sovol Zero" diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.6 Hardened Steel nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.6 Hardened Steel nozzle.json new file mode 100644 index 0000000000..5b53d59ae2 --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.6 Hardened Steel nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "name": "Sovol Zero 0.6 Hardened Steel nozzle", + "inherits": "Sovol Zero 0.6 nozzle", + "from": "system", + "setting_id": "s3N3FJkWrzOylFm8", + "instantiation": "true", + "printer_model": "Sovol Zero", + "printer_variant": "0.6HS", + "nozzle_diameter": [ + "0.6" + ], + "default_filament_profile": [ + "Generic PLA @Sovol Zero Hardened Steel nozzle" + ], + "nozzle_type": [ + "hardened_steel" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.6 nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.6 nozzle.json new file mode 100644 index 0000000000..6fe78791d5 --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.6 nozzle.json @@ -0,0 +1,133 @@ +{ + "type": "machine", + "name": "Sovol Zero 0.6 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "BlngL0WExXTeyrXg", + "instantiation": "true", + "printer_model": "Sovol Zero", + "default_print_profile": "0.30mm Standard @Sovol Zero 0.6 nozzle", + "printer_variant": "0.6", + "nozzle_diameter": [ + "0.6" + ], + "min_layer_height": [ + "0.12" + ], + "max_layer_height": [ + "0.48" + ], + "retract_before_wipe": [ + "0%" + ], + "printable_area": [ + "0x0", + "152.4x0", + "152.4x152.4", + "0x152.4" + ], + "printable_height": "152.4", + "gcode_flavor": "klipper", + "retraction_length": [ + "3.0" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "1200", + "1200" + ], + "machine_max_speed_y": [ + "1200", + "1200" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "40000", + "40000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "40000", + "40000" + ], + "machine_max_acceleration_x": [ + "40000", + "40000" + ], + "machine_max_acceleration_y": [ + "40000", + "40000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "5", + "5" + ], + "machine_max_jerk_y": [ + "5", + "5" + ], + "machine_max_jerk_z": [ + "0.5", + "0.5" + ], + "z_hop": [ + "0.6" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retraction_minimum_travel": [ + "0" + ], + "retract_length_toolchange": [ + "2" + ], + "wipe": [ + "1" + ], + "wipe_distance": [ + "3" + ], + "z_hop_types": [ + "Auto Lift" + ], + "thumbnails": [ + "300x300", + "32x32" + ], + "retract_lift_below": [ + "150" + ], + "auxiliary_fan": "1", + "thumbnails_format": "PNG", + "before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n", + "machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nSTART_PRINT\nG28\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[1] - 6 > print_bed_min[1]}\nG90\nM83\nG1 E-0.5 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 5} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z1 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 4} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z5 F600\nM400\n{else}\nG90\nM83\nG1 E-0.300 Z3 F600\nG1 X{print_bed_max[1] / 3} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 Z0.3 F600\nG1 E0.300 F600\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3} Y1 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 E-0.300 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n", + "machine_end_gcode": "END_PRINT\n", + "default_filament_profile": [ + "Generic PLA @Sovol Zero" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.8 Hardened Steel nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.8 Hardened Steel nozzle.json new file mode 100644 index 0000000000..db6bd740fb --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.8 Hardened Steel nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "name": "Sovol Zero 0.8 Hardened Steel nozzle", + "inherits": "Sovol Zero 0.8 nozzle", + "from": "system", + "setting_id": "houacf8sQ3bLozqD", + "instantiation": "true", + "printer_model": "Sovol Zero", + "printer_variant": "0.8HS", + "nozzle_diameter": [ + "0.8" + ], + "default_filament_profile": [ + "Generic PLA @Sovol Zero Hardened Steel nozzle" + ], + "nozzle_type": [ + "hardened_steel" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 0.8 nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 0.8 nozzle.json new file mode 100644 index 0000000000..5fb9f267c7 --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 0.8 nozzle.json @@ -0,0 +1,133 @@ +{ + "type": "machine", + "name": "Sovol Zero 0.8 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "DDpJMY1A2r4k1Cho", + "instantiation": "true", + "printer_model": "Sovol Zero", + "default_print_profile": "0.40mm Standard @Sovol Zero 0.8 nozzle", + "printer_variant": "0.8", + "nozzle_diameter": [ + "0.8" + ], + "min_layer_height": [ + "0.08" + ], + "max_layer_height": [ + "0.64" + ], + "retract_before_wipe": [ + "0%" + ], + "printable_area": [ + "0x0", + "152.4x0", + "152.4x152.4", + "0x152.4" + ], + "printable_height": "152.4", + "gcode_flavor": "klipper", + "retraction_length": [ + "3.0" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "1200", + "1200" + ], + "machine_max_speed_y": [ + "1200", + "1200" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "40000", + "40000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "40000", + "40000" + ], + "machine_max_acceleration_x": [ + "40000", + "40000" + ], + "machine_max_acceleration_y": [ + "40000", + "40000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "5", + "5" + ], + "machine_max_jerk_y": [ + "5", + "5" + ], + "machine_max_jerk_z": [ + "0.5", + "0.5" + ], + "z_hop": [ + "0.6" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retraction_minimum_travel": [ + "0" + ], + "retract_length_toolchange": [ + "2" + ], + "wipe": [ + "1" + ], + "wipe_distance": [ + "3" + ], + "z_hop_types": [ + "Auto Lift" + ], + "thumbnails": [ + "300x300", + "32x32" + ], + "retract_lift_below": [ + "150" + ], + "auxiliary_fan": "1", + "thumbnails_format": "PNG", + "before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n", + "machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nSTART_PRINT\nG28\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[1] - 6 > print_bed_min[1]}\nG90\nM83\nG1 E-0.5 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 5} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z1 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 4} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z5 F600\nM400\n{else}\nG90\nM83\nG1 E-0.300 Z3 F600\nG1 X{print_bed_max[1] / 3} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 Z0.3 F600\nG1 E0.300 F600\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3} Y1 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 E-0.300 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n", + "machine_end_gcode": "END_PRINT\n", + "default_filament_profile": [ + "Generic PLA @Sovol Zero" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 1.0 Hardened Steel nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 1.0 Hardened Steel nozzle.json new file mode 100644 index 0000000000..73b99e55ef --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 1.0 Hardened Steel nozzle.json @@ -0,0 +1,19 @@ +{ + "type": "machine", + "name": "Sovol Zero 1.0 Hardened Steel nozzle", + "inherits": "Sovol Zero 1.0 nozzle", + "from": "system", + "setting_id": "sqlEiL0in8LSjmmn", + "instantiation": "true", + "printer_model": "Sovol Zero", + "printer_variant": "1.0HS", + "nozzle_diameter": [ + "1.0" + ], + "default_filament_profile": [ + "Generic PLA @Sovol Zero Hardened Steel nozzle" + ], + "nozzle_type": [ + "hardened_steel" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero 1.0 nozzle.json b/resources/profiles/Sovol/machine/Sovol Zero 1.0 nozzle.json new file mode 100644 index 0000000000..fd87dafdaf --- /dev/null +++ b/resources/profiles/Sovol/machine/Sovol Zero 1.0 nozzle.json @@ -0,0 +1,133 @@ +{ + "type": "machine", + "name": "Sovol Zero 1.0 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "CGunT3KHnCqEAlrN", + "instantiation": "true", + "printer_model": "Sovol Zero", + "default_print_profile": "0.50mm Standard @Sovol Zero 1.0 nozzle", + "printer_variant": "1.0", + "nozzle_diameter": [ + "1.0" + ], + "min_layer_height": [ + "0.16" + ], + "max_layer_height": [ + "0.8" + ], + "retract_before_wipe": [ + "0%" + ], + "printable_area": [ + "0x0", + "152.4x0", + "152.4x152.4", + "0x152.4" + ], + "printable_height": "152.4", + "gcode_flavor": "klipper", + "retraction_length": [ + "3.0" + ], + "machine_max_speed_e": [ + "50", + "50" + ], + "machine_max_speed_x": [ + "1200", + "1200" + ], + "machine_max_speed_y": [ + "1200", + "1200" + ], + "machine_max_speed_z": [ + "30", + "30" + ], + "machine_max_acceleration_e": [ + "20000", + "20000" + ], + "machine_max_acceleration_extruding": [ + "40000", + "40000" + ], + "machine_max_acceleration_retracting": [ + "20000", + "20000" + ], + "machine_max_acceleration_travel": [ + "40000", + "40000" + ], + "machine_max_acceleration_x": [ + "40000", + "40000" + ], + "machine_max_acceleration_y": [ + "40000", + "40000" + ], + "machine_max_acceleration_z": [ + "1000", + "1000" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "5", + "5" + ], + "machine_max_jerk_y": [ + "5", + "5" + ], + "machine_max_jerk_z": [ + "0.5", + "0.5" + ], + "z_hop": [ + "0.6" + ], + "retraction_speed": [ + "40" + ], + "deretraction_speed": [ + "40" + ], + "retraction_minimum_travel": [ + "0" + ], + "retract_length_toolchange": [ + "2" + ], + "wipe": [ + "1" + ], + "wipe_distance": [ + "3" + ], + "z_hop_types": [ + "Auto Lift" + ], + "thumbnails": [ + "300x300", + "32x32" + ], + "retract_lift_below": [ + "150" + ], + "auxiliary_fan": "1", + "thumbnails_format": "PNG", + "before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0\nSET_PRINT_STATS_INFO CURRENT_LAYER=[layer_num]\n", + "machine_start_gcode": "M140 S[bed_temperature_initial_layer_single] ;set bed temp\nM190 S[bed_temperature_initial_layer_single] ;wait for bed temp\nG28\nSTART_PRINT\nG28\nG90\nG1 X0 Y0 F12000\nG1 Z0.300 F600\nM104 S[nozzle_temperature_initial_layer] ;set extruder temp\nM109 S[nozzle_temperature_initial_layer];wait for extruder temp\n{if first_layer_print_min[1] - 6 > print_bed_min[1]}\nG90\nM83\nG1 E-0.5 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 5} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z1 F600\nG1 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4} Y{first_layer_print_min[1] - 4} F12000\nG0 Z0.3 F600 ;Move to start position\nG1 E0.200 F600\n{if first_layer_print_max[0] - first_layer_print_min[0] > 50}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*1} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*4} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*5} E{5 * 0.2}F{outer_wall_volumetric_speed/(24/20) * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*8} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*9} E{5 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 4 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\n{else}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0]) / 2} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG0 X{first_layer_print_min[0] + (first_layer_print_max[0] - first_layer_print_min[0])} E{(first_layer_print_max[0] - first_layer_print_min[0]) / 2 * 0.2}F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\n{endif}\nG1 E-0.300 F600\nG0 Z5 F600\nM400\n{else}\nG90\nM83\nG1 E-0.300 Z3 F600\nG1 X{print_bed_max[1] / 3} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 Z0.3 F600\nG1 E0.300 F600\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3} Y1 F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*1} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*2} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*3} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*4} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*5} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*6} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4 * 60}\nG1 X{print_bed_max[1] / 3 + 5*7} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20) * 60}\nG1 X{print_bed_max[1] / 3 + 5*8} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 X{print_bed_max[1] / 3 + 5*9} E{5 * 0.2} F{outer_wall_volumetric_speed/(24/20)* 60}\nG1 X{print_bed_max[1] / 3 + 5*10} E{5 * 0.2} F{outer_wall_volumetric_speed/(0.3*0.5)/4* 60}\nG1 E-0.300 Z3 F600\nM400\n{endif}\nSET_PRINT_STATS_INFO TOTAL_LAYER=[total_layer_count]\n\n", + "machine_end_gcode": "END_PRINT\n", + "default_filament_profile": [ + "Generic PLA @Sovol Zero" + ] +} diff --git a/resources/profiles/Sovol/machine/Sovol Zero.json b/resources/profiles/Sovol/machine/Sovol Zero.json index 6f99e8f8d0..1c67135cf9 100644 --- a/resources/profiles/Sovol/machine/Sovol Zero.json +++ b/resources/profiles/Sovol/machine/Sovol Zero.json @@ -2,11 +2,11 @@ "type": "machine_model", "name": "Sovol Zero", "model_id": "Sovol-Zero", - "nozzle_diameter": "0.4", + "nozzle_diameter": "0.2;0.4;0.6;0.8;1.0;0.2HS;0.4HS;0.6HS;0.8HS;1.0HS", "machine_tech": "FFF", "family": "Sovol", "bed_model": "sovol_zero_buildplate_model.stl", "bed_texture": "sovol_zero_buildplate_texture.svg", "hotend_model": "", - "default_materials": "Generic PLA @Sovol Zero;Sovol Zero PLA Basic HS Nozzle;Generic PLA Silk @Sovol Zero;Sovol Zero PLA Silk HS Nozzle;Generic ABS @Sovol Zero;Generic PETG @Sovol Zero;Sovol Zero PETG HS Nozzle;Generic TPU @Sovol Zero;Generic PC @Sovol Zero" + "default_materials": "Generic PLA @Sovol Zero;Generic PLA SPEEDBENCHY @Sovol Zero;Generic PLA @Sovol Zero Hardened Steel nozzle;Generic PLA Silk @Sovol Zero;Generic PLA Silk @Sovol Zero Hardened Steel nozzle;Generic ABS @Sovol Zero;Generic PETG @Sovol Zero;Generic PETG @Sovol Zero Hardened Steel nozzle;Generic TPU @Sovol Zero;Generic PC @Sovol Zero" } diff --git a/resources/profiles/Sovol/process/0.06mm Quality @Sovol Zero 0.2 nozzle.json b/resources/profiles/Sovol/process/0.06mm Quality @Sovol Zero 0.2 nozzle.json new file mode 100644 index 0000000000..908bfd9813 --- /dev/null +++ b/resources/profiles/Sovol/process/0.06mm Quality @Sovol Zero 0.2 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.06mm Quality @Sovol Zero 0.2 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "fWP7jaL7sJmmZ6QN", + "instantiation": "true", + "layer_height": "0.06", + "bottom_shell_layers": "8", + "bottom_shell_thickness": "0.8", + "bridge_speed": "30", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "0.21", + "line_width": "0.21", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_print_height": "0.06", + "initial_layer_line_width": "0.3", + "infill_wall_overlap": "18", + "inner_wall_line_width": "0.22", + "wall_loops": "3", + "internal_solid_infill_line_width": "0.21", + "sparse_infill_line_width": "0.21", + "support_top_z_distance": "0.10", + "support_line_width": "0.21", + "tree_support_tip_diameter": "0.21", + "support_speed": "100", + "top_surface_line_width": "0.21", + "top_shell_layers": "8", + "top_shell_thickness": "1", + "compatible_printers": [ + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.2 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.10mm Standard @Sovol Zero 0.2 nozzle.json b/resources/profiles/Sovol/process/0.10mm Standard @Sovol Zero 0.2 nozzle.json new file mode 100644 index 0000000000..15540bb172 --- /dev/null +++ b/resources/profiles/Sovol/process/0.10mm Standard @Sovol Zero 0.2 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.10mm Standard @Sovol Zero 0.2 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "Gql3487jsaTXyuYZ", + "instantiation": "true", + "layer_height": "0.10", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_speed": "50", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "0.22", + "line_width": "0.22", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_print_height": "0.12", + "initial_layer_line_width": "0.3", + "infill_wall_overlap": "20", + "inner_wall_line_width": "0.22", + "wall_loops": "2", + "internal_solid_infill_line_width": "0.22", + "sparse_infill_line_width": "0.22", + "support_top_z_distance": "0.20", + "support_line_width": "0.22", + "tree_support_tip_diameter": "0.22", + "support_speed": "100", + "top_surface_line_width": "0.22", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "compatible_printers": [ + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.2 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.12mm Quality @Sovol Zero 0.4 nozzle.json b/resources/profiles/Sovol/process/0.12mm Quality @Sovol Zero 0.4 nozzle.json new file mode 100644 index 0000000000..642c136c55 --- /dev/null +++ b/resources/profiles/Sovol/process/0.12mm Quality @Sovol Zero 0.4 nozzle.json @@ -0,0 +1,35 @@ +{ + "type": "process", + "name": "0.12mm Quality @Sovol Zero 0.4 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "CaEopiv2Wg6pQJjH", + "instantiation": "true", + "layer_height": "0.12", + "bottom_shell_layers": "8", + "bottom_shell_thickness": "0.8", + "bridge_speed": "30", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "0.42", + "line_width": "0.42", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_print_height": "0.12", + "initial_layer_line_width": "0.6", + "sparse_infill_line_width": "0.42", + "infill_wall_overlap": "18", + "inner_wall_line_width": "0.44", + "wall_loops": "3", + "support_top_z_distance": "0.10", + "support_line_width": "0.42", + "tree_support_tip_diameter": "0.42", + "support_speed": "100", + "top_surface_line_width": "0.42", + "internal_solid_infill_line_width": "0.42", + "top_shell_layers": "8", + "compatible_printers": [ + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.14mm Fast @Sovol Zero 0.2 nozzle.json b/resources/profiles/Sovol/process/0.14mm Fast @Sovol Zero 0.2 nozzle.json new file mode 100644 index 0000000000..79fe17eb39 --- /dev/null +++ b/resources/profiles/Sovol/process/0.14mm Fast @Sovol Zero 0.2 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "process", + "name": "0.14mm Fast @Sovol Zero 0.2 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "I9yoyCcGGTRrDoKu", + "instantiation": "true", + "layer_height": "0.14", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_speed": "60", + "outer_wall_acceleration": "22000", + "top_surface_acceleration": "22000", + "outer_wall_line_width": "0.24", + "line_width": "0.24", + "sparse_infill_density": "10%", + "inner_wall_acceleration": "28000", + "initial_layer_print_height": "0.14", + "initial_layer_line_width": "0.3", + "infill_wall_overlap": "20", + "inner_wall_line_width": "0.24", + "wall_loops": "2", + "internal_solid_infill_line_width": "0.24", + "sparse_infill_line_width": "0.24", + "support_top_z_distance": "0.30", + "support_line_width": "0.24", + "tree_support_tip_diameter": "0.24", + "support_speed": "120", + "top_surface_line_width": "0.24", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "compatible_printers": [ + "Sovol Zero 0.2 nozzle", + "Sovol Zero 0.2 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.15mm Quality @Sovol Zero 0.6 nozzle.json b/resources/profiles/Sovol/process/0.15mm Quality @Sovol Zero 0.6 nozzle.json new file mode 100644 index 0000000000..75b3e3bc9f --- /dev/null +++ b/resources/profiles/Sovol/process/0.15mm Quality @Sovol Zero 0.6 nozzle.json @@ -0,0 +1,34 @@ +{ + "type": "process", + "name": "0.15mm Quality @Sovol Zero 0.6 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "IfDpa3vM99D4ytny", + "instantiation": "true", + "layer_height": "0.15", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0.8", + "bridge_speed": "30", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "0.63", + "line_width": "0.63", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_line_width": "0.9", + "sparse_infill_line_width": "0.63", + "infill_wall_overlap": "18", + "inner_wall_line_width": "0.66", + "wall_loops": "3", + "support_top_z_distance": "0.15", + "support_line_width": "0.63", + "tree_support_tip_diameter": "0.63", + "support_speed": "100", + "top_surface_line_width": "0.63", + "top_shell_layers": "5", + "internal_solid_infill_line_width": "0.63", + "compatible_printers": [ + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.20mm Quality @Sovol Zero 0.8 nozzle.json b/resources/profiles/Sovol/process/0.20mm Quality @Sovol Zero 0.8 nozzle.json new file mode 100644 index 0000000000..c9774c6d65 --- /dev/null +++ b/resources/profiles/Sovol/process/0.20mm Quality @Sovol Zero 0.8 nozzle.json @@ -0,0 +1,42 @@ +{ + "type": "process", + "name": "0.20mm Quality @Sovol Zero 0.8 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "MSxikpQZNYdoBynZ", + "instantiation": "true", + "layer_height": "0.20", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_speed": "30", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "0.84", + "line_width": "0.84", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_print_height": "0.36", + "initial_layer_line_width": "1.2", + "sparse_infill_line_width": "0.84", + "infill_wall_overlap": "18", + "inner_wall_line_width": "0.88", + "wall_loops": "3", + "support_top_z_distance": "0.20", + "support_line_width": "0.84", + "tree_support_tip_diameter": "0.84", + "support_speed": "100", + "top_surface_line_width": "0.84", + "top_shell_layers": "4", + "outer_wall_speed": "350", + "inner_wall_speed": "400", + "small_perimeter_speed": "50%", + "internal_solid_infill_speed": "200", + "internal_solid_infill_line_width": "0.84", + "top_surface_speed": "200", + "gap_infill_speed": "200", + "sparse_infill_speed": "500", + "compatible_printers": [ + "Sovol Zero 0.8 nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json b/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json index 323553beaa..0e05d5c232 100644 --- a/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json +++ b/resources/profiles/Sovol/process/0.20mm Standard @Sovol Zero 0.4 nozzle.json @@ -1,141 +1,36 @@ { "type": "process", "name": "0.20mm Standard @Sovol Zero 0.4 nozzle", - "inherits": "fdm_process_common", + "inherits": "fdm_process_zero", "from": "system", "setting_id": "ShJTVnJ492No1j2j", "instantiation": "true", - "reduce_crossing_wall": "1", - "max_travel_detour_distance": "100%", "layer_height": "0.20", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "3", - "bottom_shell_thickness": "0", - "bridge_flow": "1.2", - "internal_bridge_flow": "1.2", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.8", "bridge_speed": "50", - "internal_bridge_speed": "200", - "brim_type": "auto_brim", - "brim_width": "5", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "default_acceleration": "40000", "outer_wall_acceleration": "10000", "top_surface_acceleration": "5000", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0.1", - "enable_arc_fitting": "0", - "exclude_object": "1", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.4", - "infill_direction": "45", - "sparse_infill_density": "10%", - "sparse_infill_pattern": "grid", - "internal_solid_infill_acceleration": "50%", - "initial_layer_acceleration": "1000", - "initial_solid_infill_acceleration": "3000", - "travel_acceleration": "40000", + "outer_wall_line_width": "0.44", + "line_width": "0.44", + "sparse_infill_density": "15%", "inner_wall_acceleration": "12000", - "outer_wall_jerk": "5", - "inner_wall_jerk": "5", - "infill_jerk": "5", - "top_surface_jerk": "5", - "initial_layer_jerk": "5", - "travel_jerk": "5", - "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.25", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "15%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.25", - "ironing_speed": "15", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{printer_model}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode", - "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "20", - "inner_wall_line_width": "0.4", + "initial_layer_print_height": "0.24", + "initial_layer_line_width": "0.6", + "sparse_infill_line_width": "0.44", + "infill_wall_overlap": "20", + "ironing_speed": "100", + "inner_wall_line_width": "0.44", "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "0.8", - "skirt_height": "1", - "skirt_loops": "1", - "minimum_sparse_infill_area": "15", - "internal_solid_infill_line_width": "0.45", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "tree(auto)", - "support_style": "default", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.235", - "support_bottom_z_distance": "0.235", - "support_filament": "0", - "support_line_width": "0.45", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "5", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.2", - "support_bottom_interface_spacing": "0.2", - "support_interface_speed": "100%", - "support_interface_pattern": "grid", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "3.5", - "support_speed": "100", - "support_threshold_angle": "20", - "support_object_xy_distance": "0.35", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonic", - "top_surface_line_width": "0.38", + "support_top_z_distance": "0.20", + "support_line_width": "0.44", + "tree_support_tip_diameter": "0.44", + "support_speed": "60", + "top_surface_line_width": "0.44", "top_shell_layers": "4", - "top_shell_thickness": "1", - "initial_layer_speed": "55", - "initial_layer_infill_speed": "105", - "initial_layer_travel_speed": "60%", - "outer_wall_speed": "350", - "inner_wall_speed": "400", - "small_perimeter_speed": "50%", - "internal_solid_infill_speed": "200", - "top_surface_speed": "200", - "gap_infill_speed": "200", - "sparse_infill_speed": "500", - "accel_to_decel_enable": "1", - "accel_to_decel_factor": "25%", - "travel_speed": "1000", - "enable_prime_tower": "1", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "bridge_acceleration": "50%", - "seam_gap": "10%", - "precise_outer_wall": "1", - "wall_generator": "classic", - "gcode_label_objects": "1", - "slow_down_layers": "3", - "top_solid_infill_flow_ratio": "0.9", - "only_one_wall_top": "1", - "wall_loop_direction": "clockwise", - "top_bottom_infill_wall_overlap": "25%", - "filter_out_gap_fill": "0", - "detect_narrow_internal_solid_infill": "1", - "thick_bridges": "1", - "bridge_angle": "0", + "internal_solid_infill_line_width": "0.44", "compatible_printers": [ - "Sovol Zero 0.4 nozzle" + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle" ] } diff --git a/resources/profiles/Sovol/process/0.25mm Quality @Sovol Zero 1.0 nozzle.json b/resources/profiles/Sovol/process/0.25mm Quality @Sovol Zero 1.0 nozzle.json new file mode 100644 index 0000000000..60e8db168f --- /dev/null +++ b/resources/profiles/Sovol/process/0.25mm Quality @Sovol Zero 1.0 nozzle.json @@ -0,0 +1,79 @@ +{ + "type": "process", + "name": "0.25mm Quality @Sovol Zero 1.0 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "JUmnFOoEMJrbWCN9", + "instantiation": "true", + "layer_height": "0.25", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_speed": "30", + "internal_bridge_speed": "200", + "default_acceleration": "40000", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "1.05", + "line_width": "1.05", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_print_height": "0.45", + "initial_layer_line_width": "1.5", + "infill_combination": "0", + "sparse_infill_line_width": "1.05", + "infill_wall_overlap": "18", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.25", + "ironing_speed": "15", + "ironing_type": "no ironing", + "filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "20", + "inner_wall_line_width": "1.1", + "wall_loops": "3", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "0.8", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "1.05", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "snug", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.25", + "support_bottom_z_distance": "0.235", + "support_filament": "0", + "support_line_width": "1.05", + "tree_support_tip_diameter": "1.05", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "5", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_bottom_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_pattern": "grid", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "3.5", + "support_speed": "100", + "support_threshold_angle": "50", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "40", + "top_surface_line_width": "1.05", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "compatible_printers": [ + "Sovol Zero 1.0 nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json b/resources/profiles/Sovol/process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json new file mode 100644 index 0000000000..ade76267af --- /dev/null +++ b/resources/profiles/Sovol/process/0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle.json @@ -0,0 +1,85 @@ +{ + "type": "process", + "name": "0.25mm SPEEDBENCHY @Sovol Zero 0.4 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "oFrWcSxmad1b6sD4", + "instantiation": "true", + "layer_height": "0.25", + "initial_layer_print_height": "0.25", + "line_width": "0.5", + "initial_layer_line_width": "0.5", + "outer_wall_line_width": "0.5", + "inner_wall_line_width": "0.5", + "top_surface_line_width": "0.55", + "internal_solid_infill_line_width": "0.55", + "sparse_infill_line_width": "0.55", + "support_line_width": "0.5", + "tree_support_tip_diameter": "0.5", + "wall_loops": "2", + "top_shell_layers": "3", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "sparse_infill_density": "10%", + "sparse_infill_pattern": "grid", + "bottom_solid_infill_flow_ratio": "1.2", + "top_solid_infill_flow_ratio": "1.4", + "bridge_flow": "1", + "internal_bridge_flow": "1", + "bridge_speed": "250", + "internal_bridge_speed": "250", + "bridge_acceleration": "100%", + "thick_bridges": "0", + "thick_internal_bridges": "0", + "brim_type": "outer_only", + "brim_width": "1", + "brim_object_gap": "0", + "filter_out_gap_fill": "13", + "gap_fill_target": "nowhere", + "min_width_top_surface": "200%", + "minimum_sparse_infill_area": "0", + "infill_direction": "0", + "solid_infill_direction": "0", + "infill_wall_overlap": "15%", + "reduce_crossing_wall": "0", + "skirt_loops": "0", + "only_one_wall_top": "1", + "slow_down_layers": "1", + "wall_direction": "cw", + "initial_layer_speed": "300", + "initial_layer_infill_speed": "300", + "initial_layer_travel_speed": "100%", + "outer_wall_speed": "350", + "inner_wall_speed": "400", + "small_perimeter_speed": "100%", + "internal_solid_infill_speed": "400", + "top_surface_speed": "300", + "gap_infill_speed": "350", + "sparse_infill_speed": "500", + "support_speed": "100", + "travel_speed": "1200", + "default_acceleration": "40000", + "initial_layer_acceleration": "20000", + "outer_wall_acceleration": "40000", + "inner_wall_acceleration": "40000", + "top_surface_acceleration": "20000", + "internal_solid_infill_acceleration": "100%", + "travel_acceleration": "40000", + "accel_to_decel_factor": "50%", + "outer_wall_jerk": "20", + "inner_wall_jerk": "20", + "infill_jerk": "20", + "top_surface_jerk": "20", + "initial_layer_jerk": "20", + "travel_jerk": "20", + "overhang_1_4_speed": "160", + "overhang_2_4_speed": "100", + "overhang_3_4_speed": "60", + "overhang_4_4_speed": "40", + "support_top_z_distance": "0.235", + "support_bottom_z_distance": "0.235", + "compatible_printers": [ + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.28mm Fast @Sovol Zero 0.4 nozzle.json b/resources/profiles/Sovol/process/0.28mm Fast @Sovol Zero 0.4 nozzle.json new file mode 100644 index 0000000000..1ad361e3e2 --- /dev/null +++ b/resources/profiles/Sovol/process/0.28mm Fast @Sovol Zero 0.4 nozzle.json @@ -0,0 +1,39 @@ +{ + "type": "process", + "name": "0.28mm Fast @Sovol Zero 0.4 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "1VoML2LGDk4TJgLI", + "instantiation": "true", + "layer_height": "0.28", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_speed": "60", + "outer_wall_acceleration": "22000", + "top_surface_acceleration": "22000", + "outer_wall_line_width": "0.48", + "line_width": "0.48", + "sparse_infill_density": "10%", + "inner_wall_acceleration": "28000", + "initial_layer_print_height": "0.28", + "initial_layer_line_width": "0.6", + "sparse_infill_line_width": "0.48", + "inner_wall_line_width": "0.48", + "internal_solid_infill_line_width": "0.48", + "support_top_z_distance": "0.30", + "support_line_width": "0.48", + "tree_support_tip_diameter": "0.48", + "support_speed": "120", + "top_surface_line_width": "0.48", + "outer_wall_speed": "350", + "inner_wall_speed": "400", + "small_perimeter_speed": "50%", + "internal_solid_infill_speed": "200", + "top_surface_speed": "200", + "gap_infill_speed": "200", + "sparse_infill_speed": "500", + "compatible_printers": [ + "Sovol Zero 0.4 nozzle", + "Sovol Zero 0.4 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.30mm Standard @Sovol Zero 0.6 nozzle.json b/resources/profiles/Sovol/process/0.30mm Standard @Sovol Zero 0.6 nozzle.json new file mode 100644 index 0000000000..930c0c14b0 --- /dev/null +++ b/resources/profiles/Sovol/process/0.30mm Standard @Sovol Zero 0.6 nozzle.json @@ -0,0 +1,35 @@ +{ + "type": "process", + "name": "0.30mm Standard @Sovol Zero 0.6 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "lTAs2USEP8D749K7", + "instantiation": "true", + "layer_height": "0.30", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_speed": "50", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "0.66", + "line_width": "0.66", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_print_height": "0.36", + "initial_layer_line_width": "0.9", + "sparse_infill_line_width": "0.66", + "infill_wall_overlap": "20", + "inner_wall_line_width": "0.66", + "wall_loops": "2", + "support_top_z_distance": "0.30", + "support_line_width": "0.66", + "tree_support_tip_diameter": "0.66", + "support_speed": "100", + "top_surface_line_width": "0.66", + "top_shell_layers": "4", + "internal_solid_infill_line_width": "0.66", + "compatible_printers": [ + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.40mm Standard @Sovol Zero 0.8 nozzle.json b/resources/profiles/Sovol/process/0.40mm Standard @Sovol Zero 0.8 nozzle.json new file mode 100644 index 0000000000..7eeecf4ece --- /dev/null +++ b/resources/profiles/Sovol/process/0.40mm Standard @Sovol Zero 0.8 nozzle.json @@ -0,0 +1,42 @@ +{ + "type": "process", + "name": "0.40mm Standard @Sovol Zero 0.8 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "8x4CsuqroC9HOdAN", + "instantiation": "true", + "layer_height": "0.40", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_speed": "50", + "outer_wall_acceleration": "10000", + "top_surface_acceleration": "5000", + "outer_wall_line_width": "0.88", + "line_width": "0.88", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "12000", + "initial_layer_print_height": "0.48", + "initial_layer_line_width": "1.2", + "sparse_infill_line_width": "0.88", + "infill_wall_overlap": "20", + "inner_wall_line_width": "0.88", + "wall_loops": "2", + "support_top_z_distance": "0.40", + "support_line_width": "0.88", + "tree_support_tip_diameter": "0.88", + "support_speed": "100", + "top_surface_line_width": "0.88", + "top_shell_layers": "4", + "outer_wall_speed": "350", + "inner_wall_speed": "400", + "small_perimeter_speed": "50%", + "internal_solid_infill_speed": "200", + "top_surface_speed": "200", + "gap_infill_speed": "200", + "sparse_infill_speed": "500", + "internal_solid_infill_line_width": "0.88", + "compatible_printers": [ + "Sovol Zero 0.8 nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.42mm Fast @Sovol Zero 0.6 nozzle.json b/resources/profiles/Sovol/process/0.42mm Fast @Sovol Zero 0.6 nozzle.json new file mode 100644 index 0000000000..75a9522c62 --- /dev/null +++ b/resources/profiles/Sovol/process/0.42mm Fast @Sovol Zero 0.6 nozzle.json @@ -0,0 +1,39 @@ +{ + "type": "process", + "name": "0.42mm Fast @Sovol Zero 0.6 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "illqJAnGiA2pY0hw", + "instantiation": "true", + "layer_height": "0.42", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_speed": "60", + "outer_wall_acceleration": "22000", + "top_surface_acceleration": "22000", + "outer_wall_line_width": "0.72", + "line_width": "0.72", + "sparse_infill_density": "10%", + "inner_wall_acceleration": "28000", + "initial_layer_print_height": "0.42", + "initial_layer_line_width": "0.9", + "sparse_infill_line_width": "0.72", + "inner_wall_line_width": "0.72", + "internal_solid_infill_line_width": "0.72", + "support_top_z_distance": "0.45", + "support_line_width": "0.72", + "tree_support_tip_diameter": "0.72", + "support_speed": "120", + "top_surface_line_width": "0.72", + "outer_wall_speed": "350", + "inner_wall_speed": "400", + "small_perimeter_speed": "50%", + "internal_solid_infill_speed": "200", + "top_surface_speed": "200", + "gap_infill_speed": "200", + "sparse_infill_speed": "500", + "compatible_printers": [ + "Sovol Zero 0.6 nozzle", + "Sovol Zero 0.6 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.50mm Standard @Sovol Zero 1.0 nozzle.json b/resources/profiles/Sovol/process/0.50mm Standard @Sovol Zero 1.0 nozzle.json new file mode 100644 index 0000000000..c1446a6536 --- /dev/null +++ b/resources/profiles/Sovol/process/0.50mm Standard @Sovol Zero 1.0 nozzle.json @@ -0,0 +1,87 @@ +{ + "type": "process", + "name": "0.50mm Standard @Sovol Zero 1.0 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "E5K55O4RkMyYCAlt", + "instantiation": "true", + "layer_height": "0.50", + "bottom_shell_layers": "4", + "bottom_shell_thickness": "0.8", + "bridge_speed": "45", + "internal_bridge_speed": "200", + "default_acceleration": "22000", + "outer_wall_acceleration": "16000", + "top_surface_acceleration": "16000", + "outer_wall_line_width": "1.1", + "line_width": "1.1", + "sparse_infill_density": "15%", + "inner_wall_acceleration": "22000", + "initial_layer_print_height": "0.60", + "initial_layer_line_width": "1.5", + "infill_combination": "0", + "sparse_infill_line_width": "1.1", + "infill_wall_overlap": "20", + "interface_shells": "0", + "ironing_flow": "15%", + "ironing_spacing": "0.25", + "ironing_speed": "15", + "ironing_type": "no ironing", + "filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode", + "detect_overhang_wall": "1", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "20", + "inner_wall_line_width": "1.1", + "wall_loops": "2", + "print_settings_id": "", + "raft_layers": "0", + "seam_position": "aligned", + "skirt_distance": "0.8", + "skirt_height": "1", + "skirt_loops": "1", + "minimum_sparse_infill_area": "15", + "internal_solid_infill_line_width": "1.1", + "spiral_mode": "0", + "standby_temperature_delta": "-5", + "enable_support": "0", + "resolution": "0.012", + "support_type": "tree(auto)", + "support_style": "snug", + "support_on_build_plate_only": "0", + "support_top_z_distance": "0.50", + "support_bottom_z_distance": "0.235", + "support_filament": "0", + "support_line_width": "1.1", + "tree_support_tip_diameter": "1.1", + "support_interface_loop_pattern": "0", + "support_interface_filament": "0", + "support_interface_top_layers": "5", + "support_interface_bottom_layers": "-1", + "support_interface_spacing": "0.2", + "support_bottom_interface_spacing": "0.2", + "support_interface_speed": "100%", + "support_interface_pattern": "grid", + "support_base_pattern": "rectilinear", + "support_base_pattern_spacing": "3.5", + "support_speed": "60", + "support_threshold_angle": "50", + "support_object_xy_distance": "0.35", + "tree_support_branch_angle": "40", + "top_surface_line_width": "1.1", + "top_shell_layers": "4", + "top_shell_thickness": "1", + "outer_wall_speed": "30", + "inner_wall_speed": "45", + "small_perimeter_speed": "45", + "internal_solid_infill_speed": "45", + "top_surface_speed": "35", + "gap_infill_speed": "35", + "sparse_infill_speed": "70", + "travel_acceleration": "38000", + "compatible_printers": [ + "Sovol Zero 1.0 nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.56mm Fast @Sovol Zero 0.8 nozzle.json b/resources/profiles/Sovol/process/0.56mm Fast @Sovol Zero 0.8 nozzle.json new file mode 100644 index 0000000000..3bef013a12 --- /dev/null +++ b/resources/profiles/Sovol/process/0.56mm Fast @Sovol Zero 0.8 nozzle.json @@ -0,0 +1,40 @@ +{ + "type": "process", + "name": "0.56mm Fast @Sovol Zero 0.8 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "g9PPRM4FLMwjMUfy", + "instantiation": "true", + "layer_height": "0.56", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_speed": "60", + "default_acceleration": "28000", + "outer_wall_acceleration": "22000", + "top_surface_acceleration": "22000", + "outer_wall_line_width": "0.96", + "line_width": "0.96", + "sparse_infill_density": "10%", + "inner_wall_acceleration": "28000", + "initial_layer_print_height": "0.56", + "initial_layer_line_width": "1.2", + "sparse_infill_line_width": "0.96", + "inner_wall_line_width": "0.96", + "internal_solid_infill_line_width": "0.96", + "support_top_z_distance": "0.60", + "support_line_width": "0.96", + "tree_support_tip_diameter": "0.96", + "top_surface_line_width": "0.96", + "top_shell_layers": "4", + "outer_wall_speed": "35", + "inner_wall_speed": "55", + "small_perimeter_speed": "60", + "internal_solid_infill_speed": "55", + "top_surface_speed": "40", + "gap_infill_speed": "40", + "sparse_infill_speed": "80", + "compatible_printers": [ + "Sovol Zero 0.8 nozzle", + "Sovol Zero 0.8 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/0.70mm Fast @Sovol Zero 1.0 nozzle.json b/resources/profiles/Sovol/process/0.70mm Fast @Sovol Zero 1.0 nozzle.json new file mode 100644 index 0000000000..39d5309914 --- /dev/null +++ b/resources/profiles/Sovol/process/0.70mm Fast @Sovol Zero 1.0 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "process", + "name": "0.70mm Fast @Sovol Zero 1.0 nozzle", + "inherits": "fdm_process_zero", + "from": "system", + "setting_id": "fW5KJBVndgQE868q", + "instantiation": "true", + "layer_height": "0.70", + "bottom_shell_layers": "3", + "bottom_shell_thickness": "0", + "bridge_speed": "60", + "outer_wall_acceleration": "22000", + "top_surface_acceleration": "22000", + "outer_wall_line_width": "1.2", + "line_width": "1.2", + "sparse_infill_density": "10%", + "inner_wall_acceleration": "28000", + "initial_layer_print_height": "0.70", + "initial_layer_line_width": "1.5", + "sparse_infill_line_width": "1.2", + "inner_wall_line_width": "1.2", + "internal_solid_infill_line_width": "1.2", + "support_top_z_distance": "0.75", + "support_line_width": "1.2", + "tree_support_tip_diameter": "1.2", + "support_speed": "120", + "top_surface_line_width": "1.2", + "top_shell_layers": "3", + "compatible_printers": [ + "Sovol Zero 1.0 nozzle", + "Sovol Zero 1.0 Hardened Steel nozzle" + ] +} diff --git a/resources/profiles/Sovol/process/fdm_process_zero.json b/resources/profiles/Sovol/process/fdm_process_zero.json new file mode 100644 index 0000000000..da4df2686e --- /dev/null +++ b/resources/profiles/Sovol/process/fdm_process_zero.json @@ -0,0 +1,73 @@ +{ + "type": "process", + "name": "fdm_process_zero", + "inherits": "fdm_process_common", + "from": "system", + "instantiation": "false", + "reduce_crossing_wall": "1", + "max_travel_detour_distance": "10", + "bottom_surface_pattern": "monotonic", + "bridge_flow": "1.2", + "internal_bridge_flow": "1.2", + "brim_type": "auto_brim", + "brim_width": "5", + "brim_object_gap": "0", + "print_sequence": "by layer", + "bridge_no_support": "0", + "draft_shield": "disabled", + "elefant_foot_compensation": "0.1", + "enable_arc_fitting": "0", + "exclude_object": "1", + "wall_infill_order": "inner wall/outer wall/infill", + "infill_direction": "45", + "sparse_infill_pattern": "grid", + "internal_solid_infill_acceleration": "50%", + "initial_layer_acceleration": "1000", + "travel_acceleration": "40000", + "outer_wall_jerk": "5", + "inner_wall_jerk": "5", + "infill_jerk": "5", + "top_surface_jerk": "5", + "initial_layer_jerk": "5", + "travel_jerk": "5", + "tree_support_wall_count": "0", + "reduce_infill_retraction": "1", + "detect_thin_wall": "1", + "top_surface_pattern": "monotonic", + "initial_layer_speed": "55", + "initial_layer_infill_speed": "105", + "initial_layer_travel_speed": "60%", + "outer_wall_speed": "350", + "inner_wall_speed": "400", + "small_perimeter_speed": "50%", + "internal_solid_infill_speed": "200", + "top_surface_speed": "200", + "gap_infill_speed": "200", + "sparse_infill_speed": "500", + "accel_to_decel_enable": "1", + "accel_to_decel_factor": "25%", + "travel_speed": "1000", + "enable_prime_tower": "0", + "wipe_tower_no_sparse_layers": "0", + "prime_tower_width": "60", + "xy_hole_compensation": "0", + "xy_contour_compensation": "0", + "bridge_acceleration": "50%", + "seam_gap": "10%", + "precise_outer_wall": "1", + "wall_generator": "classic", + "gcode_label_objects": "1", + "slow_down_layers": "3", + "top_solid_infill_flow_ratio": "0.9", + "only_one_wall_top": "1", + "top_bottom_infill_wall_overlap": "25%", + "filter_out_gap_fill": "0", + "detect_narrow_internal_solid_infill": "1", + "thick_bridges": "1", + "bridge_angle": "0", + "initial_layer_line_width": "150%", + "default_acceleration": "40000", + "compatible_printers": [], + "internal_bridge_speed": "150", + "filename_format": "{input_filename_base}_{nozzle_diameter[0]}n_{filament_type[0]}_{layer_height}_{print_time}.gcode" +} diff --git a/resources/profiles/Tiertime.json b/resources/profiles/Tiertime.json index a7efecf420..a48691dd23 100644 --- a/resources/profiles/Tiertime.json +++ b/resources/profiles/Tiertime.json @@ -1,6 +1,6 @@ { "name": "Tiertime", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "0", "description": "Tiertime configurations", "machine_model_list": [ diff --git a/resources/profiles/Tiertime/filament/Generic ABS @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic ABS @Tiertime 300HS.json index e9d7aca6fc..d668d84e4e 100644 --- a/resources/profiles/Tiertime/filament/Generic ABS @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic ABS @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Tiertime 300HS", - "inherits": "fdm_filament_abs", "renamed_from": "Tiertime Generic ABS@300HS;Tiertime Generic ABS300HS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "CDku986CRCZQpwu4", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Tiertime/filament/Generic ABS @Tiertime.json b/resources/profiles/Tiertime/filament/Generic ABS @Tiertime.json index 7e8f606a6e..31fd71a17a 100644 --- a/resources/profiles/Tiertime/filament/Generic ABS @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic ABS @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Tiertime", - "inherits": "fdm_filament_abs", "renamed_from": "Tiertime Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "mDRlI9biZBn9sNlS", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Tiertime/filament/Generic ASA @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic ASA @Tiertime 300HS.json index adffa21725..8187f650a3 100644 --- a/resources/profiles/Tiertime/filament/Generic ASA @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic ASA @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Tiertime 300HS", - "inherits": "fdm_filament_asa", "renamed_from": "Tiertime Generic ASA@300HS;Tiertime Generic ASA300HS", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "HLh2XxQuVOa86efy", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Tiertime/filament/Generic ASA @Tiertime.json b/resources/profiles/Tiertime/filament/Generic ASA @Tiertime.json index 1529e0f702..b49082c269 100644 --- a/resources/profiles/Tiertime/filament/Generic ASA @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic ASA @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Tiertime", - "inherits": "fdm_filament_asa", "renamed_from": "Tiertime Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "kGrTR0sC37w9Qi3b", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime 300HS.json index 9db52386cb..40024ebb71 100644 --- a/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic BVOH @Tiertime 300HS", - "inherits": "fdm_filament_bvoh", "renamed_from": "Tiertime Generic BVOH@300HS;Tiertime Generic BVOH300HS", + "inherits": "fdm_filament_bvoh", "from": "system", "setting_id": "aCtg07TUbh6I9XPo", "filament_id": "OFo2UF2C", diff --git a/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime.json b/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime.json index fd6e2a529f..0e8188e36e 100644 --- a/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic BVOH @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic BVOH @Tiertime", - "inherits": "fdm_filament_bvoh", "renamed_from": "Tiertime Generic BVOH", + "inherits": "fdm_filament_bvoh", "from": "system", "setting_id": "b642QISGuDZ18fQ8", "filament_id": "OFo2UF2C", diff --git a/resources/profiles/Tiertime/filament/Generic EVA @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic EVA @Tiertime 300HS.json index f066563e4c..22bfc30c35 100644 --- a/resources/profiles/Tiertime/filament/Generic EVA @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic EVA @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic EVA @Tiertime 300HS", - "inherits": "fdm_filament_eva", "renamed_from": "Tiertime Generic EVA@300HS;Tiertime Generic EVA300HS", + "inherits": "fdm_filament_eva", "from": "system", "setting_id": "q5f3UKuj7KOtiNkH", "filament_id": "OFCD8qiU", diff --git a/resources/profiles/Tiertime/filament/Generic EVA @Tiertime.json b/resources/profiles/Tiertime/filament/Generic EVA @Tiertime.json index ec49722cae..e5fdbfa8a4 100644 --- a/resources/profiles/Tiertime/filament/Generic EVA @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic EVA @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic EVA @Tiertime", - "inherits": "fdm_filament_eva", "renamed_from": "Tiertime Generic EVA", + "inherits": "fdm_filament_eva", "from": "system", "setting_id": "NTY4MeZtxt16HNAV", "filament_id": "OFCD8qiU", diff --git a/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime 300HS.json index 8eaa300930..6b624d8c67 100644 --- a/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic HIPS @Tiertime 300HS", - "inherits": "fdm_filament_hips", "renamed_from": "Tiertime Generic HIPS@300HS;Tiertime Generic HIPS300HS", + "inherits": "fdm_filament_hips", "from": "system", "setting_id": "ee157A7VEkDzMh61", "filament_id": "OFsFon5l", diff --git a/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime.json b/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime.json index 519e690ed6..f53f9155e6 100644 --- a/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic HIPS @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic HIPS @Tiertime", - "inherits": "fdm_filament_hips", "renamed_from": "Tiertime Generic HIPS", + "inherits": "fdm_filament_hips", "from": "system", "setting_id": "3Vm99hmTMTFPKNGk", "filament_id": "OFsFon5l", diff --git a/resources/profiles/Tiertime/filament/Generic PA @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PA @Tiertime 300HS.json index 3c97aa11a7..39aa5ad463 100644 --- a/resources/profiles/Tiertime/filament/Generic PA @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PA @Tiertime 300HS.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Generic PA @Tiertime 300HS", - "inherits": "fdm_filament_pa", "renamed_from": "Tiertime Generic PA@300HS;Tiertime Generic PA300HS", + "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "OFg8ndtj", "setting_id": "yGD1puWjH2QFacXJ", + "filament_id": "OFg8ndtj", "instantiation": "true", "chamber_temperatures": [ "60" diff --git a/resources/profiles/Tiertime/filament/Generic PA @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PA @Tiertime.json index 1ff338b317..4a73b6c27d 100644 --- a/resources/profiles/Tiertime/filament/Generic PA @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PA @Tiertime.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Generic PA @Tiertime", - "inherits": "fdm_filament_pa", "renamed_from": "Tiertime Generic PA", + "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "OFg8ndtj", "setting_id": "u37BwUzY2vt6zqjd", + "filament_id": "OFg8ndtj", "instantiation": "true", "chamber_temperatures": [ "60" diff --git a/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime 300HS.json index 3feade702d..d6981a6ecf 100644 --- a/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime 300HS.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Generic PA-CF @Tiertime 300HS", - "inherits": "fdm_filament_pa", "renamed_from": "Tiertime Generic PA-CF@300HS;Tiertime Generic PA-CF300HS", + "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "OFQLcbps", "setting_id": "nZprcLHiLIAKvqtu", + "filament_id": "OFQLcbps", "instantiation": "true", "fan_cooling_layer_time": [ "5" diff --git a/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime.json index fe57cb7806..c1c6963425 100644 --- a/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PA-CF @Tiertime.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Generic PA-CF @Tiertime", - "inherits": "fdm_filament_pa", "renamed_from": "Tiertime Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", - "filament_id": "OFQLcbps", "setting_id": "1oq9XQtCUcV9wGYV", + "filament_id": "OFQLcbps", "instantiation": "true", "fan_cooling_layer_time": [ "5" diff --git a/resources/profiles/Tiertime/filament/Generic PC @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PC @Tiertime 300HS.json index 591d1c9208..b2d1961c4e 100644 --- a/resources/profiles/Tiertime/filament/Generic PC @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PC @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Tiertime 300HS", - "inherits": "fdm_filament_pc", "renamed_from": "Tiertime Generic PC@300HS;Tiertime Generic PC300HS", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "cqm5YuWHhzXdvE0M", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Tiertime/filament/Generic PC @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PC @Tiertime.json index 8c36c18828..af1160e509 100644 --- a/resources/profiles/Tiertime/filament/Generic PC @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PC @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Tiertime", - "inherits": "fdm_filament_pc", "renamed_from": "Tiertime Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "ILOqHUkf5W9fcRic", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime 300HS.json index 25eb1b1b76..0c82dafed0 100644 --- a/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PCTG @Tiertime 300HS", - "inherits": "fdm_filament_pctg", "renamed_from": "Tiertime Generic PCTG@300HS;Tiertime Generic PCTG300HS", + "inherits": "fdm_filament_pctg", "from": "system", "setting_id": "1VNFGuUO3KSO6Yfr", "filament_id": "OFu1evlr", diff --git a/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime.json index 4d091cde32..d0945c92ba 100644 --- a/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PCTG @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PCTG @Tiertime", - "inherits": "fdm_filament_pctg", "renamed_from": "Tiertime Generic PCTG", + "inherits": "fdm_filament_pctg", "from": "system", "setting_id": "tJIMGMxg0hRSfL95", "filament_id": "OFu1evlr", diff --git a/resources/profiles/Tiertime/filament/Generic PE @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PE @Tiertime 300HS.json index a1fa9c5859..4743e2dd64 100644 --- a/resources/profiles/Tiertime/filament/Generic PE @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PE @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PE @Tiertime 300HS", - "inherits": "fdm_filament_pe", "renamed_from": "Tiertime Generic PE@300HS;Tiertime Generic PE300HS", + "inherits": "fdm_filament_pe", "from": "system", "setting_id": "CO9KWZrfkTYBnB4X", "filament_id": "OFPklMI1", diff --git a/resources/profiles/Tiertime/filament/Generic PE @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PE @Tiertime.json index 0684af67d8..4e96edfc00 100644 --- a/resources/profiles/Tiertime/filament/Generic PE @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PE @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PE @Tiertime", - "inherits": "fdm_filament_pe", "renamed_from": "Tiertime Generic PE", + "inherits": "fdm_filament_pe", "from": "system", "setting_id": "2U06Qrlxin8nLr9s", "filament_id": "OFPklMI1", diff --git a/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime 300HS.json index 11a6680550..59c94fe9c2 100644 --- a/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PE-CF @Tiertime 300HS", - "inherits": "fdm_filament_pe", "renamed_from": "Tiertime Generic PE-CF@300HS;Tiertime Generic PE-CF300HS", + "inherits": "fdm_filament_pe", "from": "system", "setting_id": "512vfRIxs8uwOBpP", "filament_id": "OFd0Fv0k", diff --git a/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime.json index ecc5a74d8c..6f2fd9fb2e 100644 --- a/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PE-CF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PE-CF @Tiertime", - "inherits": "fdm_filament_pe", "renamed_from": "Tiertime Generic PE-CF", + "inherits": "fdm_filament_pe", "from": "system", "setting_id": "QWIMNxCCZ9URxMjo", "filament_id": "OFd0Fv0k", diff --git a/resources/profiles/Tiertime/filament/Generic PETG @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PETG @Tiertime 300HS.json index e65d53bc71..2eb489ac68 100644 --- a/resources/profiles/Tiertime/filament/Generic PETG @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PETG @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Tiertime 300HS", - "inherits": "fdm_filament_pet", "renamed_from": "Tiertime Generic PETG@300HS;Tiertime Generic PETG300HS", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "btlSAAZFdFgnfIqh", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Tiertime/filament/Generic PETG @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PETG @Tiertime.json index cdf4a2ba88..2fe87a8ce8 100644 --- a/resources/profiles/Tiertime/filament/Generic PETG @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PETG @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Tiertime", - "inherits": "fdm_filament_pet", "renamed_from": "Tiertime Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "JwdH78YQ3v5XxsIq", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime 300HS.json index 2193ee85fe..f10abb4950 100644 --- a/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Tiertime 300HS", - "inherits": "fdm_filament_pet", "renamed_from": "Tiertime Generic PETG-CF@300HS;Tiertime Generic PETG-CF300HS", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "pnBek08LG30iqOmr", "filament_id": "OFoYSJKi", diff --git a/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime.json index 42b67f2c6d..b39dab2a80 100644 --- a/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PETG-CF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG-CF @Tiertime", - "inherits": "fdm_filament_pet", "renamed_from": "Tiertime Generic PETG-CF", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "97ZKNZS7uHaNzgLJ", "filament_id": "OFoYSJKi", diff --git a/resources/profiles/Tiertime/filament/Generic PHA @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PHA @Tiertime 300HS.json index d7d10eedfc..8f9d28e4bf 100644 --- a/resources/profiles/Tiertime/filament/Generic PHA @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PHA @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PHA @Tiertime 300HS", - "inherits": "fdm_filament_pha", "renamed_from": "Tiertime Generic PHA@300HS;Tiertime Generic PHA300HS", + "inherits": "fdm_filament_pha", "from": "system", "setting_id": "cdIDNHr9YR5p1gQx", "filament_id": "OF74KeQR", diff --git a/resources/profiles/Tiertime/filament/Generic PHA @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PHA @Tiertime.json index f0565e38a2..e75fdf606f 100644 --- a/resources/profiles/Tiertime/filament/Generic PHA @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PHA @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PHA @Tiertime", - "inherits": "fdm_filament_pha", "renamed_from": "Tiertime Generic PHA", + "inherits": "fdm_filament_pha", "from": "system", "setting_id": "GvzA9Y6mP5a767Qb", "filament_id": "OF74KeQR", diff --git a/resources/profiles/Tiertime/filament/Generic PLA @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PLA @Tiertime 300HS.json index 58c56fee5d..b4ea8b127a 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PLA @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Tiertime 300HS", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA@300HS;Tiertime Generic PLA300HS", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "VdXotPCaBzW0DswJ", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Tiertime/filament/Generic PLA @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PLA @Tiertime.json index 5f8aaf4229..32deff2d0a 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PLA @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Tiertime", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "RuyaWPyP41WHbU7p", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime 300HS.json index 779cc6ca4e..ff349c9461 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Tiertime 300HS", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA High Speed@300HS;Tiertime Generic PLA High Speed300HS", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "cDQTrE11kyvmtj6l", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime.json index c88496b0e6..a943b78c86 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PLA High Speed @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA High Speed @Tiertime", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA High Speed", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "HFwoDRXx0L72uTKc", "filament_id": "OFmpMwxS", diff --git a/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime 300HS.json index ba4745b50c..e74c192e6a 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Tiertime 300HS", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA Silk@300HS;Tiertime Generic PLA Silk300HS", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "pXFxVcPY3aVixOKU", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime.json index a2cbb3f4c4..755816a520 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PLA Silk @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA Silk @Tiertime", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA Silk", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "5R7nTGblzuEWfdog", "filament_id": "OFesA6rF", diff --git a/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime 300HS.json index d4ceebf2db..a23c9b9fa2 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Tiertime 300HS", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA-CF@300HS;Tiertime Generic PLA-CF300HS", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "CVks3a5cABQw38Ia", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime.json index 306ff427aa..f6fef07e95 100644 --- a/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PLA-CF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Tiertime", - "inherits": "fdm_filament_pla", "renamed_from": "Tiertime Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "SSHFL8Wbk46BaTYF", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Tiertime/filament/Generic PP @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PP @Tiertime 300HS.json index b79c34b466..52cfc3e370 100644 --- a/resources/profiles/Tiertime/filament/Generic PP @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PP @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PP @Tiertime 300HS", - "inherits": "fdm_filament_pp", "renamed_from": "Tiertime Generic PP@300HS;Tiertime Generic PP300HS", + "inherits": "fdm_filament_pp", "from": "system", "setting_id": "BmIuSlyYKMw76mqs", "filament_id": "OF1UNk9P", diff --git a/resources/profiles/Tiertime/filament/Generic PP @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PP @Tiertime.json index 0b7361dc78..84876ea951 100644 --- a/resources/profiles/Tiertime/filament/Generic PP @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PP @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PP @Tiertime", - "inherits": "fdm_filament_pp", "renamed_from": "Tiertime Generic PP", + "inherits": "fdm_filament_pp", "from": "system", "setting_id": "hbt3RXCxomod1cBQ", "filament_id": "OF1UNk9P", diff --git a/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime 300HS.json index e5a08307fa..4ca3b1f67a 100644 --- a/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PP-CF @Tiertime 300HS", - "inherits": "fdm_filament_pp", "renamed_from": "Tiertime Generic PP-CF@300HS;Tiertime Generic PP-CF300HS", + "inherits": "fdm_filament_pp", "from": "system", "setting_id": "u1Sqh9bCLFQvJxoS", "filament_id": "OFXkm8q1", diff --git a/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime.json index 4c8abaa8ce..39f9d257c4 100644 --- a/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PP-CF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PP-CF @Tiertime", - "inherits": "fdm_filament_pp", "renamed_from": "Tiertime Generic PP-CF", + "inherits": "fdm_filament_pp", "from": "system", "setting_id": "2giqoHCbRKiAuTyB", "filament_id": "OFXkm8q1", diff --git a/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime 300HS.json index 820f415b25..16eadd4a3c 100644 --- a/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PP-GF @Tiertime 300HS", - "inherits": "fdm_filament_pp", "renamed_from": "Tiertime Generic PP-GF@300HS;Tiertime Generic PP-GF300HS", + "inherits": "fdm_filament_pp", "from": "system", "setting_id": "Aiw0kkL0EFLNZ0zB", "filament_id": "OFsijjtH", diff --git a/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime.json index 930f2d7870..3648000b42 100644 --- a/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PP-GF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PP-GF @Tiertime", - "inherits": "fdm_filament_pp", "renamed_from": "Tiertime Generic PP-GF", + "inherits": "fdm_filament_pp", "from": "system", "setting_id": "HQaX19e4JViPTQn0", "filament_id": "OFsijjtH", diff --git a/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime 300HS.json index 6402b8a7c9..4dba9a28d4 100644 --- a/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPA-CF @Tiertime 300HS", - "inherits": "fdm_filament_ppa", "renamed_from": "Tiertime Generic PPA-CF@300HS;Tiertime Generic PPA-CF300HS", + "inherits": "fdm_filament_ppa", "from": "system", "setting_id": "yEjRoG6UAmEBAsTg", "filament_id": "OF8tPByX", diff --git a/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime.json index 845cd1f1f3..a509513732 100644 --- a/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PPA-CF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPA-CF @Tiertime", - "inherits": "fdm_filament_ppa", "renamed_from": "Tiertime Generic PPA-CF", + "inherits": "fdm_filament_ppa", "from": "system", "setting_id": "C3VjtPXIQ9CikaQH", "filament_id": "OF8tPByX", diff --git a/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime 300HS.json index 75a81d0aff..5e3602b1a2 100644 --- a/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPA-GF @Tiertime 300HS", - "inherits": "fdm_filament_ppa", "renamed_from": "Tiertime Generic PPA-GF@300HS;Tiertime Generic PPA-GF300HS", + "inherits": "fdm_filament_ppa", "from": "system", "setting_id": "9088HrpGRDIqqxTs", "filament_id": "OF8Tlg47", diff --git a/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime.json index 7ec50bd2f4..cbcd2dfc93 100644 --- a/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PPA-GF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPA-GF @Tiertime", - "inherits": "fdm_filament_ppa", "renamed_from": "Tiertime Generic PPA-GF", + "inherits": "fdm_filament_ppa", "from": "system", "setting_id": "jGP0en9vTFNmj5AJ", "filament_id": "OF8Tlg47", diff --git a/resources/profiles/Tiertime/filament/Generic PPS @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PPS @Tiertime 300HS.json index bd804b9ffc..75d249dfaa 100644 --- a/resources/profiles/Tiertime/filament/Generic PPS @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PPS @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPS @Tiertime 300HS", - "inherits": "fdm_filament_pps", "renamed_from": "Tiertime Generic PPS@300HS;Tiertime Generic PPS300HS", + "inherits": "fdm_filament_pps", "from": "system", "setting_id": "KIspUdArMQzvDtcX", "filament_id": "OFq9svOz", diff --git a/resources/profiles/Tiertime/filament/Generic PPS @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PPS @Tiertime.json index dbb381012e..f0f1980545 100644 --- a/resources/profiles/Tiertime/filament/Generic PPS @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PPS @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPS @Tiertime", - "inherits": "fdm_filament_pps", "renamed_from": "Tiertime Generic PPS", + "inherits": "fdm_filament_pps", "from": "system", "setting_id": "NCTW11dGCzTxasjU", "filament_id": "OFq9svOz", diff --git a/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime 300HS.json index f53a77c9c6..ce5102519b 100644 --- a/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPS-CF @Tiertime 300HS", - "inherits": "fdm_filament_pps", "renamed_from": "Tiertime Generic PPS-CF@300HS;Tiertime Generic PPS-CF300HS", + "inherits": "fdm_filament_pps", "from": "system", "setting_id": "E7mVBEFECdf1mhXE", "filament_id": "OF6rdQ6M", diff --git a/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime.json index 3e4e15da7d..0cf6dad6d3 100644 --- a/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PPS-CF @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PPS-CF @Tiertime", - "inherits": "fdm_filament_pps", "renamed_from": "Tiertime Generic PPS-CF", + "inherits": "fdm_filament_pps", "from": "system", "setting_id": "QUPOb7dBkg6bPul2", "filament_id": "OF6rdQ6M", diff --git a/resources/profiles/Tiertime/filament/Generic PVA @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic PVA @Tiertime 300HS.json index 2efe590fb6..ab6e0df772 100644 --- a/resources/profiles/Tiertime/filament/Generic PVA @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic PVA @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Tiertime 300HS", - "inherits": "fdm_filament_pva", "renamed_from": "Tiertime Generic PVA@300HS;Tiertime Generic PVA300HS", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "E8fgXFvjTnIpqdrg", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Tiertime/filament/Generic PVA @Tiertime.json b/resources/profiles/Tiertime/filament/Generic PVA @Tiertime.json index 588648b8b0..d4d0492e25 100644 --- a/resources/profiles/Tiertime/filament/Generic PVA @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic PVA @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Tiertime", - "inherits": "fdm_filament_pva", "renamed_from": "Tiertime Generic PVA", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "6R2BduAh4ASmGbDd", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Tiertime/filament/Generic SBS @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic SBS @Tiertime 300HS.json index f3860b4e64..a25e559f84 100644 --- a/resources/profiles/Tiertime/filament/Generic SBS @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic SBS @Tiertime 300HS.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic SBS @Tiertime 300HS", - "inherits": "fdm_filament_sbs", "renamed_from": "Tiertime Generic SBS@300HS;Tiertime Generic SBS300HS", + "inherits": "fdm_filament_sbs", "from": "system", "setting_id": "nS6aGQgepNoAjumo", "filament_id": "OFhQfUQY", diff --git a/resources/profiles/Tiertime/filament/Generic SBS @Tiertime.json b/resources/profiles/Tiertime/filament/Generic SBS @Tiertime.json index 7c4751aa34..76ecfb07df 100644 --- a/resources/profiles/Tiertime/filament/Generic SBS @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic SBS @Tiertime.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic SBS @Tiertime", - "inherits": "fdm_filament_sbs", "renamed_from": "Tiertime Generic SBS", + "inherits": "fdm_filament_sbs", "from": "system", "setting_id": "nyv523sDXK9fDbtb", "filament_id": "OFhQfUQY", diff --git a/resources/profiles/Tiertime/filament/Generic TPU @Tiertime 300HS.json b/resources/profiles/Tiertime/filament/Generic TPU @Tiertime 300HS.json index 2d52d479d3..5d8121ea22 100644 --- a/resources/profiles/Tiertime/filament/Generic TPU @Tiertime 300HS.json +++ b/resources/profiles/Tiertime/filament/Generic TPU @Tiertime 300HS.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Generic TPU @Tiertime 300HS", - "inherits": "fdm_filament_tpu", "renamed_from": "Tiertime Generic TPU@300HS;Tiertime Generic TPU300HS", + "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "OFgbpcy9", "setting_id": "99UYNDy3zV3bChRG", + "filament_id": "OFgbpcy9", "instantiation": "true", "filament_max_volumetric_speed": [ "3.2" diff --git a/resources/profiles/Tiertime/filament/Generic TPU @Tiertime.json b/resources/profiles/Tiertime/filament/Generic TPU @Tiertime.json index a32f1173dc..24db1ff710 100644 --- a/resources/profiles/Tiertime/filament/Generic TPU @Tiertime.json +++ b/resources/profiles/Tiertime/filament/Generic TPU @Tiertime.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "Generic TPU @Tiertime", - "inherits": "fdm_filament_tpu", "renamed_from": "Tiertime Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", - "filament_id": "OFgbpcy9", "setting_id": "UCowa7X5TZwXBJWe", + "filament_id": "OFgbpcy9", "instantiation": "true", "filament_max_volumetric_speed": [ "3.2" diff --git a/resources/profiles/Tiertime/filament/Tiertime ABS.json b/resources/profiles/Tiertime/filament/Tiertime ABS.json index 4ff6b5c8fd..2821a27abe 100644 --- a/resources/profiles/Tiertime/filament/Tiertime ABS.json +++ b/resources/profiles/Tiertime/filament/Tiertime ABS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFNQKF0M", - "setting_id": "uAtyf2jCQEcv7D2r", "name": "Tiertime ABS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "uAtyf2jCQEcv7D2r", + "filament_id": "OFNQKF0M", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Tiertime/filament/Tiertime ABS@300HS.json b/resources/profiles/Tiertime/filament/Tiertime ABS@300HS.json index 7014efe177..440ef41f48 100644 --- a/resources/profiles/Tiertime/filament/Tiertime ABS@300HS.json +++ b/resources/profiles/Tiertime/filament/Tiertime ABS@300HS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFNQKF0M", - "setting_id": "x1XBGyOHIgrD7PVs", "name": "Tiertime ABS@300HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "x1XBGyOHIgrD7PVs", + "filament_id": "OFNQKF0M", + "instantiation": "true", "filament_flow_ratio": [ "0.95" ], diff --git a/resources/profiles/Tiertime/filament/Tiertime PLA.json b/resources/profiles/Tiertime/filament/Tiertime PLA.json index d0a030184a..72eba01283 100644 --- a/resources/profiles/Tiertime/filament/Tiertime PLA.json +++ b/resources/profiles/Tiertime/filament/Tiertime PLA.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFNGTH3w", - "setting_id": "dlXQZNrJfvkJ3kWs", "name": "Tiertime PLA", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "dlXQZNrJfvkJ3kWs", + "filament_id": "OFNGTH3w", + "instantiation": "true", "filament_cost": [ "24.99" ], diff --git a/resources/profiles/Tiertime/filament/Tiertime PLA@300HS.json b/resources/profiles/Tiertime/filament/Tiertime PLA@300HS.json index 48073d5c76..6707898c2b 100644 --- a/resources/profiles/Tiertime/filament/Tiertime PLA@300HS.json +++ b/resources/profiles/Tiertime/filament/Tiertime PLA@300HS.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFNGTH3w", - "setting_id": "bqWrzfz6CXHohbpL", "name": "Tiertime PLA@300HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "bqWrzfz6CXHohbpL", + "filament_id": "OFNGTH3w", + "instantiation": "true", "filament_cost": [ "24.99" ], diff --git a/resources/profiles/Tiertime/machine/Tiertime UP300 HS 0.4 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP300 HS 0.4 nozzle.json index 63c5e51e50..f4e621c1ca 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP300 HS 0.4 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP300 HS 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "lgltuIatOQ6w6QbU", "name": "Tiertime UP300 HS 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_tiertime_common", + "from": "system", + "setting_id": "lgltuIatOQ6w6QbU", + "instantiation": "true", "printer_model": "Tiertime UP300 HS", "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Tiertime/machine/Tiertime UP310 Pro 0.4 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP310 Pro 0.4 nozzle.json index 8baee541a6..7dae9872c8 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP310 Pro 0.4 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP310 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "HMZ8IXHF9SCYY794", "name": "Tiertime UP310 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_tiertime_common", + "from": "system", + "setting_id": "HMZ8IXHF9SCYY794", + "instantiation": "true", "printer_model": "Tiertime UP310 Pro", "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.4 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.4 nozzle.json index ce65946a41..c7c4473c55 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.4 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "92AYB3s93gFz7ZPX", "name": "Tiertime UP400 Pro 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_tiertime_common", + "from": "system", + "setting_id": "92AYB3s93gFz7ZPX", + "instantiation": "true", "printer_model": "Tiertime UP400 Pro", "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.6 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.6 nozzle.json index 272017038f..ac5ce33f63 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.6 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "6NLuMd5QTEV7Dz7y", "name": "Tiertime UP400 Pro 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Tiertime UP400 Pro 0.4 nozzle", + "from": "system", + "setting_id": "6NLuMd5QTEV7Dz7y", + "instantiation": "true", "printer_model": "Tiertime UP400 Pro", "nozzle_diameter": [ "0.6" diff --git a/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.8 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.8 nozzle.json index f43bda57a8..ed5c96f834 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.8 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP400 Pro 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "MieJsq4OcDXSPeYE", "name": "Tiertime UP400 Pro 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Tiertime UP400 Pro 0.4 nozzle", + "from": "system", + "setting_id": "MieJsq4OcDXSPeYE", + "instantiation": "true", "printer_model": "Tiertime UP400 Pro", "nozzle_diameter": [ "0.8" diff --git a/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.4 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.4 nozzle.json index a18c2a938f..2691e807ae 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.4 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.4 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "6aAsuPmotiaU41L4", "name": "Tiertime UP600 HS 0.4 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_tiertime_common", + "from": "system", + "setting_id": "6aAsuPmotiaU41L4", + "instantiation": "true", "printer_model": "Tiertime UP600 HS", "nozzle_diameter": [ "0.4" diff --git a/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.6 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.6 nozzle.json index ea706dede8..1deed12abb 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.6 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.6 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "4xd2mlCoTuJoXmOf", "name": "Tiertime UP600 HS 0.6 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Tiertime UP600 HS 0.4 nozzle", + "from": "system", + "setting_id": "4xd2mlCoTuJoXmOf", + "instantiation": "true", "printer_model": "Tiertime UP600 HS", "nozzle_diameter": [ "0.6" diff --git a/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.8 nozzle.json b/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.8 nozzle.json index d114741fb9..ed010446c0 100644 --- a/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.8 nozzle.json +++ b/resources/profiles/Tiertime/machine/Tiertime UP600 HS 0.8 nozzle.json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "tqKPATsUnwQWjXso", "name": "Tiertime UP600 HS 0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "Tiertime UP600 HS 0.4 nozzle", + "from": "system", + "setting_id": "tqKPATsUnwQWjXso", + "instantiation": "true", "printer_model": "Tiertime UP600 HS", "nozzle_diameter": [ "0.8" diff --git a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP300 HS.json b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP300 HS.json index 68d60b1e2c..eb94220c60 100644 --- a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP300 HS.json +++ b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP300 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "kJslDhHisZSqoNLu", "name": "0.12mm Fine @Tiertime UP300 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "kJslDhHisZSqoNLu", + "instantiation": "true", "layer_height": "0.12", "bottom_shell_layers": "5", "elefant_foot_compensation": "0.15", diff --git a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP310 Pro.json b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP310 Pro.json index 0b3375f656..8791d34371 100644 --- a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP310 Pro.json +++ b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP310 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "u1Hfo84e0ffI39MP", "name": "0.12mm Fine @Tiertime UP310 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "u1Hfo84e0ffI39MP", + "instantiation": "true", "layer_height": "0.12", "bottom_shell_layers": "5", "elefant_foot_compensation": "0.15", diff --git a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP400 Pro.json b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP400 Pro.json index 019d4617af..b6f1519ac9 100644 --- a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP400 Pro.json +++ b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP400 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "LiT2jc5HHSsxdPOY", "name": "0.12mm Fine @Tiertime UP400 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "LiT2jc5HHSsxdPOY", + "instantiation": "true", "layer_height": "0.12", "bottom_shell_layers": "5", "elefant_foot_compensation": "0.15", diff --git a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP600 HS.json b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP600 HS.json index 63f7b269d1..6777672d93 100644 --- a/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP600 HS.json +++ b/resources/profiles/Tiertime/process/0.12mm Fine @Tiertime UP600 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "LwKN2IKIgniQAUbc", "name": "0.12mm Fine @Tiertime UP600 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "LwKN2IKIgniQAUbc", + "instantiation": "true", "layer_height": "0.12", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "5", diff --git a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP300 HS.json b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP300 HS.json index ed678b16bd..c9b9295809 100644 --- a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP300 HS.json +++ b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP300 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "deEyVahMnJBIUh5W", "name": "0.16mm Optimal @Tiertime UP300 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "deEyVahMnJBIUh5W", + "instantiation": "true", "layer_height": "0.16", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "4", diff --git a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP310 Pro.json b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP310 Pro.json index 189ac439e2..51355d03ec 100644 --- a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP310 Pro.json +++ b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP310 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "89hv0us5IMmhpDol", "name": "0.16mm Optimal @Tiertime UP310 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "89hv0us5IMmhpDol", + "instantiation": "true", "layer_height": "0.16", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "4", diff --git a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP400 Pro.json b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP400 Pro.json index 7a4b5943a5..2d3abf48f1 100644 --- a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP400 Pro.json +++ b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP400 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "yZBSB83IptM1eMzO", "name": "0.16mm Optimal @Tiertime UP400 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "yZBSB83IptM1eMzO", + "instantiation": "true", "layer_height": "0.16", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "4", diff --git a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP600 HS.json b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP600 HS.json index b172f23ca4..36a7232b91 100644 --- a/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP600 HS.json +++ b/resources/profiles/Tiertime/process/0.16mm Optimal @Tiertime UP600 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "BfOJljkGUCnVJ0zM", "name": "0.16mm Optimal @Tiertime UP600 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "BfOJljkGUCnVJ0zM", + "instantiation": "true", "layer_height": "0.16", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "4", diff --git a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP300 HS.json b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP300 HS.json index 8d9947736b..9fc8e95fee 100644 --- a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP300 HS.json +++ b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP300 HS.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "4a1IpFohcCPCxI1I", "name": "0.20mm Standard @Tiertime UP300 HS", - "from": "system", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "4a1IpFohcCPCxI1I", "instantiation": "true", "elefant_foot_compensation": "0.15", "top_shell_thickness": "1.0", diff --git a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP310 Pro.json b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP310 Pro.json index 834b645e2e..b03937aa1c 100644 --- a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP310 Pro.json +++ b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP310 Pro.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "48QrtoSmDHWLbuck", "name": "0.20mm Standard @Tiertime UP310 Pro", - "from": "system", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "48QrtoSmDHWLbuck", "instantiation": "true", "elefant_foot_compensation": "0.15", "top_shell_thickness": "1.0", diff --git a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP400 Pro.json b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP400 Pro.json index d196edc5ca..0013fe4e77 100644 --- a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP400 Pro.json +++ b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP400 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "QotYAumKUh7h5cBH", "name": "0.20mm Standard @Tiertime UP400 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "QotYAumKUh7h5cBH", + "instantiation": "true", "layer_height": "0.2", "initial_layer_speed": "50", "initial_layer_infill_speed": "105", diff --git a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP600 HS.json b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP600 HS.json index 3db84cce38..7df15ed346 100644 --- a/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP600 HS.json +++ b/resources/profiles/Tiertime/process/0.20mm Standard @Tiertime UP600 HS.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "FKDS8Ql5ApZdlsH8", "name": "0.20mm Standard @Tiertime UP600 HS", - "from": "system", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "FKDS8Ql5ApZdlsH8", "instantiation": "true", "elefant_foot_compensation": "0.15", "top_shell_thickness": "1.0", diff --git a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP300 HS.json b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP300 HS.json index a209d85d93..ec71aa67b9 100644 --- a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP300 HS.json +++ b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP300 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "clvHKafqg81lxC4s", "name": "0.24mm Draft @Tiertime UP300 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "clvHKafqg81lxC4s", + "instantiation": "true", "layer_height": "0.24", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP310 Pro.json b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP310 Pro.json index bb2d11bcf5..ab2c2fc69a 100644 --- a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP310 Pro.json +++ b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP310 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "zr1zPgeqxJog1iO6", "name": "0.24mm Draft @Tiertime UP310 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "zr1zPgeqxJog1iO6", + "instantiation": "true", "layer_height": "0.24", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP400 Pro.json b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP400 Pro.json index 8ad2181ba3..49e7f95c99 100644 --- a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP400 Pro.json +++ b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP400 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "L84Tpur6DqX0WI9U", "name": "0.24mm Draft @Tiertime UP400 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "L84Tpur6DqX0WI9U", + "instantiation": "true", "layer_height": "0.24", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP600 HS.json b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP600 HS.json index 730b3fdb91..43705dd6d3 100644 --- a/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP600 HS.json +++ b/resources/profiles/Tiertime/process/0.24mm Draft @Tiertime UP600 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "D7fl6dZLCLa5n8Es", "name": "0.24mm Draft @Tiertime UP600 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "D7fl6dZLCLa5n8Es", + "instantiation": "true", "layer_height": "0.24", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "3", diff --git a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP300 HS.json b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP300 HS.json index 34f7f7221a..0dc2af9312 100644 --- a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP300 HS.json +++ b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP300 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "CBOtpFjUICGttrgV", "name": "0.28mm Extra Draft @Tiertime UP300 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "CBOtpFjUICGttrgV", + "instantiation": "true", "layer_height": "0.28", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP310 Pro.json b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP310 Pro.json index 0b6617941f..f822d31bc5 100644 --- a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP310 Pro.json +++ b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP310 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ODXIraViN4sdzaKe", "name": "0.28mm Extra Draft @Tiertime UP310 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "ODXIraViN4sdzaKe", + "instantiation": "true", "layer_height": "0.28", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP400 Pro.json b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP400 Pro.json index 5c11562a22..5d5f598ae9 100644 --- a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP400 Pro.json +++ b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP400 Pro.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "bfRd7zHG5JoOWdXb", "name": "0.28mm Extra Draft @Tiertime UP400 Pro", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_common", + "from": "system", + "setting_id": "bfRd7zHG5JoOWdXb", + "instantiation": "true", "layer_height": "0.28", "elefant_foot_compensation": "0.15", "top_surface_line_width": "0.45", diff --git a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP600 HS.json b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP600 HS.json index 60b1b484ee..646ad3cab9 100644 --- a/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP600 HS.json +++ b/resources/profiles/Tiertime/process/0.28mm Extra Draft @Tiertime UP600 HS.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "gl1nKSyprhumL6ci", "name": "0.28mm Extra Draft @Tiertime UP600 HS", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_tiertime_HS_common", + "from": "system", + "setting_id": "gl1nKSyprhumL6ci", + "instantiation": "true", "layer_height": "0.28", "elefant_foot_compensation": "0.15", "bottom_shell_layers": "3", diff --git a/resources/profiles/TwoTrees.json b/resources/profiles/TwoTrees.json index 5d97581ffc..3735f19d98 100644 --- a/resources/profiles/TwoTrees.json +++ b/resources/profiles/TwoTrees.json @@ -1,6 +1,6 @@ { "name": "TwoTrees", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "1", "description": "TwoTrees configurations", "machine_model_list": [ diff --git a/resources/profiles/TwoTrees/filament/Generic HS PLA @TwoTrees SK1.json b/resources/profiles/TwoTrees/filament/Generic HS PLA @TwoTrees SK1.json index fd22e6417a..fae333784c 100644 --- a/resources/profiles/TwoTrees/filament/Generic HS PLA @TwoTrees SK1.json +++ b/resources/profiles/TwoTrees/filament/Generic HS PLA @TwoTrees SK1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic HS PLA @TwoTrees SK1", - "inherits": "fdm_filament_pla", "renamed_from": "TwoTrees Generic HS PLA @SK1;TwoTrees Generic HS PLA SK1", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "uRS2QA3xad1lBZJR", "filament_id": "OFvxghTE", diff --git a/resources/profiles/TwoTrees/filament/Generic TPU 95A @TwoTrees SK1.json b/resources/profiles/TwoTrees/filament/Generic TPU 95A @TwoTrees SK1.json index 6f0221b92c..e6580e78f9 100644 --- a/resources/profiles/TwoTrees/filament/Generic TPU 95A @TwoTrees SK1.json +++ b/resources/profiles/TwoTrees/filament/Generic TPU 95A @TwoTrees SK1.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU 95A @TwoTrees SK1", - "inherits": "fdm_filament_tpu", "renamed_from": "TwoTrees Generic 95A TPU @SK1;TwoTrees Generic 95A TPU SK1", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "hAqaYYR7xzkcr2xC", "filament_id": "OFjiXpyf", diff --git a/resources/profiles/UltiMaker.json b/resources/profiles/UltiMaker.json index d437ce7191..14bce7c6da 100644 --- a/resources/profiles/UltiMaker.json +++ b/resources/profiles/UltiMaker.json @@ -1,7 +1,7 @@ { "name": "UltiMaker", "url": "", - "version": "02.04.00.03", + "version": "02.04.00.05", "force_update": "0", "description": "UltiMaker configurations", "machine_model_list": [ @@ -9,6 +9,14 @@ "name": "UltiMaker 2", "sub_path": "machine/UltiMaker 2.json" }, + { + "name": "UltiMaker 2 extended+", + "sub_path": "machine/UltiMaker 2 extended+.json" + }, + { + "name": "UltiMaker 2+", + "sub_path": "machine/UltiMaker 2+.json" + }, { "name": "UltiMaker S5", "sub_path": "machine/UltiMaker S5.json" @@ -20,27 +28,184 @@ "sub_path": "process/fdm_process_common.json" }, { - "name": "0.12mm Fine @UltiMaker 2", - "sub_path": "process/0.12mm Fine @UltiMaker 2.json" + "name": "0.10mm Fine @UltiMaker 2", + "sub_path": "process/0.10mm Fine @UltiMaker 2.json" }, { - "name": "0.18mm Standard @UltiMaker 2", - "sub_path": "process/0.18mm Standard @UltiMaker 2.json" + "name": "0.15mm Standard @UltiMaker 2", + "sub_path": "process/0.15mm Standard @UltiMaker 2.json" + }, + { + "name": "0.15mm Standard @UltiMaker 2 0.6 nozzle", + "sub_path": "process/0.15mm Standard @UltiMaker 2 0.6 nozzle.json" }, { "name": "0.18mm Standard @UltiMaker S5", "sub_path": "process/0.18mm Standard @UltiMaker S5.json" }, { - "name": "0.25mm Draft @UltiMaker 2", - "sub_path": "process/0.25mm Darft @UltiMaker 2.json" + "name": "0.20mm Draft @UltiMaker 2", + "sub_path": "process/0.20mm Draft @UltiMaker 2.json" + }, + { + "name": "0.20mm Standard @UltiMaker 2 0.8 nozzle", + "sub_path": "process/0.20mm Standard @UltiMaker 2 0.8 nozzle.json" + }, + { + "name": "0.10mm Fine @UltiMaker 2+", + "sub_path": "process/0.10mm Fine @UltiMaker 2+.json" + }, + { + "name": "0.15mm Standard @UltiMaker 2+", + "sub_path": "process/0.15mm Standard @UltiMaker 2+.json" + }, + { + "name": "0.15mm Standard @UltiMaker 2+ 0.6 nozzle", + "sub_path": "process/0.15mm Standard @UltiMaker 2+ 0.6 nozzle.json" }, { "name": "0.2mm Fast @UltiMaker S5", "sub_path": "process/0.2mm Fast @UltiMaker S5.json" + }, + { + "name": "0.20mm Draft @UltiMaker 2+", + "sub_path": "process/0.20mm Draft @UltiMaker 2+.json" + }, + { + "name": "0.20mm Standard @UltiMaker 2+ 0.8 nozzle", + "sub_path": "process/0.20mm Standard @UltiMaker 2+ 0.8 nozzle.json" + }, + { + "name": "0.10mm Fine @UltiMaker 2 extended+", + "sub_path": "process/0.10mm Fine @UltiMaker 2 extended+.json" + }, + { + "name": "0.15mm Standard @UltiMaker 2 extended+", + "sub_path": "process/0.15mm Standard @UltiMaker 2 extended+.json" + }, + { + "name": "0.15mm Standard @UltiMaker 2 extended+ 0.6 nozzle", + "sub_path": "process/0.15mm Standard @UltiMaker 2 extended+ 0.6 nozzle.json" + }, + { + "name": "0.20mm Draft @UltiMaker 2 extended+", + "sub_path": "process/0.20mm Draft @UltiMaker 2 extended+.json" + }, + { + "name": "0.20mm Standard @UltiMaker 2 extended+ 0.8 nozzle", + "sub_path": "process/0.20mm Standard @UltiMaker 2 extended+ 0.8 nozzle.json" + } + ], + "filament_list": [ + { + "name": "Generic ABS @UltiMaker 2 0.4 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2 0.4 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2 0.4 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2 0.4 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2 0.4 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2 0.4 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2 0.6 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2 0.6 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2 0.8 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2 0.8 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2+ 0.4 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2+ 0.4 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2 0.6 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2 0.6 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2 0.8 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2 0.8 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2+ 0.4 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2+ 0.4 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2 0.6 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2 0.6 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2 0.8 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2 0.8 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2+ 0.4 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2+ 0.4 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2+ 0.6 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2+ 0.6 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2+ 0.8 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2+ 0.8 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2 extended+ 0.4 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2 extended+ 0.4 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2+ 0.6 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2+ 0.6 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2+ 0.8 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2+ 0.8 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2 extended+ 0.4 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2 extended+ 0.4 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2+ 0.6 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2+ 0.6 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2+ 0.8 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2+ 0.8 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2 extended+ 0.4 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2 extended+ 0.4 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2 extended+ 0.6 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2 extended+ 0.6 nozzle.json" + }, + { + "name": "Generic ABS @UltiMaker 2 extended+ 0.8 nozzle", + "sub_path": "filament/Generic ABS @UltiMaker 2 extended+ 0.8 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2 extended+ 0.6 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2 extended+ 0.6 nozzle.json" + }, + { + "name": "Generic PETG @UltiMaker 2 extended+ 0.8 nozzle", + "sub_path": "filament/Generic PETG @UltiMaker 2 extended+ 0.8 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2 extended+ 0.6 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2 extended+ 0.6 nozzle.json" + }, + { + "name": "Generic PLA @UltiMaker 2 extended+ 0.8 nozzle", + "sub_path": "filament/Generic PLA @UltiMaker 2 extended+ 0.8 nozzle.json" } ], - "filament_list": [], "machine_list": [ { "name": "fdm_machine_common", @@ -54,9 +219,41 @@ "name": "UltiMaker S5 0.4 nozzle", "sub_path": "machine/UltiMaker S5 0.4 nozzle.json" }, + { + "name": "UltiMaker 2 0.6 nozzle", + "sub_path": "machine/UltiMaker 2 0.6 nozzle.json" + }, + { + "name": "UltiMaker 2 0.8 nozzle", + "sub_path": "machine/UltiMaker 2 0.8 nozzle.json" + }, + { + "name": "UltiMaker 2+ 0.4 nozzle", + "sub_path": "machine/UltiMaker 2+ 0.4 nozzle.json" + }, { "name": "UltiMaker S5 0.4 nozzle - Single Extruder", "sub_path": "machine/UltiMaker S5 0.4 nozzle Single Extruder.json" + }, + { + "name": "UltiMaker 2+ 0.6 nozzle", + "sub_path": "machine/UltiMaker 2+ 0.6 nozzle.json" + }, + { + "name": "UltiMaker 2+ 0.8 nozzle", + "sub_path": "machine/UltiMaker 2+ 0.8 nozzle.json" + }, + { + "name": "UltiMaker 2 extended+ 0.4 nozzle", + "sub_path": "machine/UltiMaker 2 extended+ 0.4 nozzle.json" + }, + { + "name": "UltiMaker 2 extended+ 0.6 nozzle", + "sub_path": "machine/UltiMaker 2 extended+ 0.6 nozzle.json" + }, + { + "name": "UltiMaker 2 extended+ 0.8 nozzle", + "sub_path": "machine/UltiMaker 2 extended+ 0.8 nozzle.json" } ] } diff --git a/resources/profiles/UltiMaker/UltiMaker 2 extended+_cover.png b/resources/profiles/UltiMaker/UltiMaker 2 extended+_cover.png new file mode 100644 index 0000000000..b414d18fc6 Binary files /dev/null and b/resources/profiles/UltiMaker/UltiMaker 2 extended+_cover.png differ diff --git a/resources/profiles/UltiMaker/UltiMaker 2+_cover.png b/resources/profiles/UltiMaker/UltiMaker 2+_cover.png new file mode 100644 index 0000000000..3007c8b28e Binary files /dev/null and b/resources/profiles/UltiMaker/UltiMaker 2+_cover.png differ diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.4 nozzle.json new file mode 100644 index 0000000000..a0047cf733 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.4 nozzle.json @@ -0,0 +1,45 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2 0.4 nozzle", + "inherits": "Generic ABS @System", + "from": "system", + "setting_id": "z65YPRPvIareA5TJ", + "filament_id": "OFY9muEs", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "hot_plate_temp_initial_layer": [ + "100" + ], + "nozzle_temperature": [ + "250" + ], + "nozzle_temperature_initial_layer": [ + "250" + ], + "fan_max_speed": [ + "50" + ], + "overhang_fan_speed": [ + "50" + ], + "fan_cooling_layer_time": [ + "15" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "filament_flow_ratio": [ + "1" + ], + "compatible_printers": [ + "UltiMaker 2 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.6 nozzle.json new file mode 100644 index 0000000000..6c748cb3b9 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.6 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2 0.6 nozzle", + "inherits": "Generic ABS @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "eo9lcJAw8yrGBWr8", + "filament_id": "OFY9muEs", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "compatible_printers": [ + "UltiMaker 2 0.6 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.8 nozzle.json new file mode 100644 index 0000000000..9449b0790f --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 0.8 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2 0.8 nozzle", + "inherits": "Generic ABS @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "1VE4ie9s2gYKUx7r", + "filament_id": "OFY9muEs", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "compatible_printers": [ + "UltiMaker 2 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.4 nozzle.json new file mode 100644 index 0000000000..4117cc85a4 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.4 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2 extended+ 0.4 nozzle", + "inherits": "Generic ABS @UltiMaker 2+ 0.4 nozzle", + "from": "system", + "setting_id": "tVIm7URv58VeDdQw", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.4 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.6 nozzle.json new file mode 100644 index 0000000000..29b72e2ef3 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.6 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2 extended+ 0.6 nozzle", + "inherits": "Generic ABS @UltiMaker 2+ 0.6 nozzle", + "from": "system", + "setting_id": "YtLYCadAif8luymA", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.6 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.8 nozzle.json new file mode 100644 index 0000000000..d79dde7218 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2 extended+ 0.8 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2 extended+ 0.8 nozzle", + "inherits": "Generic ABS @UltiMaker 2+ 0.8 nozzle", + "from": "system", + "setting_id": "VgBNyDQx42vL1rLK", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.8 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.4 nozzle.json new file mode 100644 index 0000000000..8a091b2f2b --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.4 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2+ 0.4 nozzle", + "inherits": "Generic ABS @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "x2noNNHwbDanbr82", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.6 nozzle.json new file mode 100644 index 0000000000..df75ca752c --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2+ 0.6 nozzle", + "inherits": "Generic ABS @UltiMaker 2 0.6 nozzle", + "from": "system", + "setting_id": "ZSQbLmnKDtdZQN0H", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.6 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.8 nozzle.json new file mode 100644 index 0000000000..4b621ff276 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic ABS @UltiMaker 2+ 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic ABS @UltiMaker 2+ 0.8 nozzle", + "inherits": "Generic ABS @UltiMaker 2 0.8 nozzle", + "from": "system", + "setting_id": "DHWugcEJWHQQ6EZH", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.4 nozzle.json new file mode 100644 index 0000000000..e1d143a97d --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.4 nozzle.json @@ -0,0 +1,36 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2 0.4 nozzle", + "inherits": "Generic PETG @System", + "from": "system", + "setting_id": "WR3y0y8gmWH40llb", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "hot_plate_temp": [ + "85" + ], + "hot_plate_temp_initial_layer": [ + "85" + ], + "nozzle_temperature": [ + "240" + ], + "nozzle_temperature_initial_layer": [ + "240" + ], + "reduce_fan_stop_start_freq": [ + "0" + ], + "compatible_printers": [ + "UltiMaker 2 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.6 nozzle.json new file mode 100644 index 0000000000..11a9702bd2 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.6 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2 0.6 nozzle", + "inherits": "Generic PETG @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "koLquuN6eQo8Zn5V", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "compatible_printers": [ + "UltiMaker 2 0.6 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.8 nozzle.json new file mode 100644 index 0000000000..32fa6828ca --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 0.8 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2 0.8 nozzle", + "inherits": "Generic PETG @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "ZtVG7edcUktSNI0P", + "filament_id": "OFYPdQJh", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "6" + ], + "compatible_printers": [ + "UltiMaker 2 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.4 nozzle.json new file mode 100644 index 0000000000..b17e6e16cb --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.4 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2 extended+ 0.4 nozzle", + "inherits": "Generic PETG @UltiMaker 2+ 0.4 nozzle", + "from": "system", + "setting_id": "yk4J40ItJ5NRDjMp", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.4 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.6 nozzle.json new file mode 100644 index 0000000000..7345d479ec --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.6 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2 extended+ 0.6 nozzle", + "inherits": "Generic PETG @UltiMaker 2+ 0.6 nozzle", + "from": "system", + "setting_id": "WLi5JuZM7vsLgW16", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.6 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.8 nozzle.json new file mode 100644 index 0000000000..cbb2074697 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2 extended+ 0.8 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2 extended+ 0.8 nozzle", + "inherits": "Generic PETG @UltiMaker 2+ 0.8 nozzle", + "from": "system", + "setting_id": "SKoqZdKJH3MyHy7n", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.8 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.4 nozzle.json new file mode 100644 index 0000000000..51eef5e94c --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.4 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2+ 0.4 nozzle", + "inherits": "Generic PETG @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "JbOqQrFc6Jv7rZrn", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.6 nozzle.json new file mode 100644 index 0000000000..1d2f250799 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2+ 0.6 nozzle", + "inherits": "Generic PETG @UltiMaker 2 0.6 nozzle", + "from": "system", + "setting_id": "jFSKG5pAy9bhdQvN", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.6 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.8 nozzle.json new file mode 100644 index 0000000000..3069133ea1 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PETG @UltiMaker 2+ 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic PETG @UltiMaker 2+ 0.8 nozzle", + "inherits": "Generic PETG @UltiMaker 2 0.8 nozzle", + "from": "system", + "setting_id": "Es1GCPcmcxB7vZj9", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.4 nozzle.json new file mode 100644 index 0000000000..0e78193ab5 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.4 nozzle.json @@ -0,0 +1,33 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2 0.4 nozzle", + "inherits": "Generic PLA @System", + "from": "system", + "setting_id": "3i42yTge4Nm6R2Yo", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "hot_plate_temp": [ + "60" + ], + "hot_plate_temp_initial_layer": [ + "60" + ], + "nozzle_temperature": [ + "200" + ], + "nozzle_temperature_initial_layer": [ + "200" + ], + "compatible_printers": [ + "UltiMaker 2 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.6 nozzle.json new file mode 100644 index 0000000000..7882b5ad40 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.6 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2 0.6 nozzle", + "inherits": "Generic PLA @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "yvWYFuY9SPIwwSVG", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "compatible_printers": [ + "UltiMaker 2 0.6 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.8 nozzle.json new file mode 100644 index 0000000000..1c83931279 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 0.8 nozzle.json @@ -0,0 +1,21 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2 0.8 nozzle", + "inherits": "Generic PLA @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "4yvMTmMYkCvggt0f", + "filament_id": "OFDSrzZ8", + "instantiation": "true", + "filament_diameter": [ + "2.85" + ], + "filament_extruder_variant": [ + "Direct Drive Standard" + ], + "filament_max_volumetric_speed": [ + "8" + ], + "compatible_printers": [ + "UltiMaker 2 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.4 nozzle.json new file mode 100644 index 0000000000..ea8c94f19e --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.4 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2 extended+ 0.4 nozzle", + "inherits": "Generic PLA @UltiMaker 2+ 0.4 nozzle", + "from": "system", + "setting_id": "O8jPrL7F3lEkG6qw", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.4 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.6 nozzle.json new file mode 100644 index 0000000000..993d8be5a9 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.6 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2 extended+ 0.6 nozzle", + "inherits": "Generic PLA @UltiMaker 2+ 0.6 nozzle", + "from": "system", + "setting_id": "6dXfh6ORD4bBIj4K", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.6 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.8 nozzle.json new file mode 100644 index 0000000000..447a58f87a --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2 extended+ 0.8 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2 extended+ 0.8 nozzle", + "inherits": "Generic PLA @UltiMaker 2+ 0.8 nozzle", + "from": "system", + "setting_id": "25cn8lVM0gKyKMJJ", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.8 nozzle"] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.4 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.4 nozzle.json new file mode 100644 index 0000000000..ccf80896a9 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.4 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2+ 0.4 nozzle", + "inherits": "Generic PLA @UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "lwzg1neqQdELxzHx", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.6 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.6 nozzle.json new file mode 100644 index 0000000000..b08163a85f --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2+ 0.6 nozzle", + "inherits": "Generic PLA @UltiMaker 2 0.6 nozzle", + "from": "system", + "setting_id": "bouWalAyezeLuqzh", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.6 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.8 nozzle.json b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.8 nozzle.json new file mode 100644 index 0000000000..52cf962376 --- /dev/null +++ b/resources/profiles/UltiMaker/filament/Generic PLA @UltiMaker 2+ 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "filament", + "name": "Generic PLA @UltiMaker 2+ 0.8 nozzle", + "inherits": "Generic PLA @UltiMaker 2 0.8 nozzle", + "from": "system", + "setting_id": "Z5vNrOdmFhuVIGpL", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2 0.4 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2 0.4 nozzle.json index b02da9ca09..5b6d4aab1a 100644 --- a/resources/profiles/UltiMaker/machine/UltiMaker 2 0.4 nozzle.json +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2 0.4 nozzle.json @@ -1,119 +1,30 @@ { - "type": "machine", - "name": "UltiMaker 2 0.4 nozzle", - "inherits": "fdm_machine_common", - "from": "system", - "setting_id": "Jl8sUeuACVyrnrst", - "instantiation": "true", - "printer_model": "UltiMaker 2", - "default_print_profile": "0.18mm Standard @UltiMaker 2", - "nozzle_diameter": [ - "0.4" - ], - "printable_area": [ - "0x0", - "224x0", - "224x225", - "0x225" - ], - "printable_height": "212", - "nozzle_type": "undefine", - "auxiliary_fan": "0", - "machine_max_acceleration_extruding": [ - "1500", - "1500" - ], - "machine_max_acceleration_retracting": [ - "1500", - "1500" - ], - "machine_max_acceleration_travel": [ - "3000", - "3000" - ], - "machine_max_acceleration_x": [ - "3000", - "3000" - ], - "machine_max_acceleration_y": [ - "3000", - "3000" - ], - "machine_max_acceleration_z": [ - "500", - "500" - ], - "machine_max_speed_e": [ - "120", - "120" - ], - "machine_max_speed_x": [ - "500", - "500" - ], - "machine_max_speed_y": [ - "500", - "500" - ], - "machine_max_speed_z": [ - "12", - "12" - ], - "machine_max_jerk_e": [ - "2.5", - "2.5" - ], - "machine_max_jerk_x": [ - "20", - "20" - ], - "machine_max_jerk_y": [ - "20", - "20" - ], - "machine_max_jerk_z": [ - "0.4", - "0.4" - ], - "machine_max_junction_deviation": [ - "0.013", - "0" - ], - "max_layer_height": [ - "0.3" - ], - "min_layer_height": [ - "0.08" - ], - "printer_settings_id": "Qidi", - "retraction_minimum_travel": [ - "5" - ], - "retract_before_wipe": [ - "70%" - ], - "retraction_length": [ - "4.5" - ], - "retract_length_toolchange": [ - "10" - ], - "retraction_speed": [ - "35" - ], - "deretraction_speed": [ - "0" - ], - "wipe_distance": [ - "0.2" - ], - "single_extruder_multi_material": "1", - "change_filament_gcode": "", - "machine_pause_gcode": "M0", - "default_filament_profile": [ - "Generic PLA @System" - ], - "machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[bed_temperature_initial_layer_single]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[bed_temperature_initial_layer_single]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header", - "machine_end_gcode": "; # # # # # # START Footer\nG91; relative coordinates\n;G1 E-1 F1200; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000; move Z a bit\n; G1 X-10 Y-10 F6000; move XY a bit\nG1 E-5.5 F300; retract the filament\nG28 X0 Y0; move X/Y to min endstops, so the head is out of the way\nM104 S0; extruder heater off\nM140 S0; heated bed heater off (if you have it)\nM84; disable motors\n; # # # # # # END Footer\n", - "scan_first_layer": "0" + "type": "machine", + "name": "UltiMaker 2 0.4 nozzle", + "inherits": "fdm_machine_common", + "from": "system", + "setting_id": "Jl8sUeuACVyrnrst", + "instantiation": "true", + + "printer_model": "UltiMaker 2", + "default_print_profile": "0.15mm Standard @UltiMaker 2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "223x0", + "223x223", + "0x223" + ], + "printable_height": "205", + "nozzle_type": "undefine", + "default_filament_profile": [ + "Generic PLA @UltiMaker 2 0.4 nozzle" + ], + "scan_first_layer": "0", + "printer_variant": "0.4", + "extruder_clearance_radius": "65", + "extruder_clearance_height_to_rod": "36", + "extruder_clearance_height_to_lid": "140" } diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2 0.6 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2 0.6 nozzle.json new file mode 100644 index 0000000000..1a8fb93c8a --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2 0.6 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "machine", + "name": "UltiMaker 2 0.6 nozzle", + "inherits": "UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "p3SYqB6dpxEMo1pb", + "instantiation": "true", + "printer_model": "UltiMaker 2", + "default_print_profile": "0.15mm Standard @UltiMaker 2 0.6 nozzle", + "nozzle_diameter": [ + "0.6" + ], + "max_layer_height": [ + "0.45" + ], + "min_layer_height": [ + "0.12" + ], + "default_filament_profile": [ + "Generic PLA @UltiMaker 2 0.6 nozzle" + ], + "printer_variant": "0.6" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2 0.8 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2 0.8 nozzle.json new file mode 100644 index 0000000000..2528d3918c --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2 0.8 nozzle.json @@ -0,0 +1,23 @@ +{ + "type": "machine", + "name": "UltiMaker 2 0.8 nozzle", + "inherits": "UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "ratwIj4y2pWpLaWJ", + "instantiation": "true", + "printer_model": "UltiMaker 2", + "default_print_profile": "0.20mm Standard @UltiMaker 2 0.8 nozzle", + "nozzle_diameter": [ + "0.8" + ], + "max_layer_height": [ + "0.6" + ], + "min_layer_height": [ + "0.16" + ], + "default_filament_profile": [ + "Generic PLA @UltiMaker 2 0.8 nozzle" + ], + "printer_variant": "0.8" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.4 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.4 nozzle.json new file mode 100644 index 0000000000..0818fd46f6 --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.4 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "machine", + "name": "UltiMaker 2 extended+ 0.4 nozzle", + "inherits": "UltiMaker 2+ 0.4 nozzle", + "from": "system", + "setting_id": "ENBg9JsL2eTECvzU", + "instantiation": "true", + "printer_model": "UltiMaker 2 extended+", + "printable_height": "305", + "default_print_profile": "0.15mm Standard @UltiMaker 2 extended+", + "default_filament_profile": ["Generic PLA @UltiMaker 2 extended+ 0.4 nozzle"], + "printer_variant": "0.4" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.6 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.6 nozzle.json new file mode 100644 index 0000000000..868fc5b456 --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.6 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "machine", + "name": "UltiMaker 2 extended+ 0.6 nozzle", + "inherits": "UltiMaker 2+ 0.6 nozzle", + "from": "system", + "setting_id": "qwIYJqwmxmiBX1ow", + "instantiation": "true", + "printer_model": "UltiMaker 2 extended+", + "printable_height": "305", + "default_print_profile": "0.15mm Standard @UltiMaker 2 extended+ 0.6 nozzle", + "default_filament_profile": ["Generic PLA @UltiMaker 2 extended+ 0.6 nozzle"], + "printer_variant": "0.6" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.8 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.8 nozzle.json new file mode 100644 index 0000000000..9e9c2a8105 --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+ 0.8 nozzle.json @@ -0,0 +1,13 @@ +{ + "type": "machine", + "name": "UltiMaker 2 extended+ 0.8 nozzle", + "inherits": "UltiMaker 2+ 0.8 nozzle", + "from": "system", + "setting_id": "MNYwZSVqB1rrYo2g", + "instantiation": "true", + "printer_model": "UltiMaker 2 extended+", + "printable_height": "305", + "default_print_profile": "0.20mm Standard @UltiMaker 2 extended+ 0.8 nozzle", + "default_filament_profile": ["Generic PLA @UltiMaker 2 extended+ 0.8 nozzle"], + "printer_variant": "0.8" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+.json b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+.json new file mode 100644 index 0000000000..43f2c765ea --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2 extended+.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "UltiMaker 2 extended+", + "model_id": "UltiMaker-2-extended-plus", + "nozzle_diameter": "0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "UltiMaker", + "bed_model": "ultimaker_2_buildplate_model.stl", + "bed_texture": "ultimaker_2_buildplate_texture.png", + "hotend_model": "ultimaker_hotend.stl", + "default_materials": "Generic ABS @UltiMaker 2 extended+ 0.4 nozzle;Generic PETG @UltiMaker 2 extended+ 0.4 nozzle;Generic PLA @UltiMaker 2 extended+ 0.4 nozzle;Generic ABS @UltiMaker 2 extended+ 0.6 nozzle;Generic PETG @UltiMaker 2 extended+ 0.6 nozzle;Generic PLA @UltiMaker 2 extended+ 0.6 nozzle;Generic ABS @UltiMaker 2 extended+ 0.8 nozzle;Generic PETG @UltiMaker 2 extended+ 0.8 nozzle;Generic PLA @UltiMaker 2 extended+ 0.8 nozzle" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.4 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.4 nozzle.json new file mode 100644 index 0000000000..a1b0469a9c --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.4 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "machine", + "name": "UltiMaker 2+ 0.4 nozzle", + "inherits": "UltiMaker 2 0.4 nozzle", + "from": "system", + "setting_id": "onhBJPgqLsVGTqir", + "instantiation": "true", + "printer_model": "UltiMaker 2+", + "default_print_profile": "0.15mm Standard @UltiMaker 2+", + "default_filament_profile": [ + "Generic PLA @UltiMaker 2+ 0.4 nozzle" + ], + "printer_variant": "0.4" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.6 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.6 nozzle.json new file mode 100644 index 0000000000..e6f8e4de06 --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.6 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "machine", + "name": "UltiMaker 2+ 0.6 nozzle", + "inherits": "UltiMaker 2 0.6 nozzle", + "from": "system", + "setting_id": "5leVdHeUMDFDmNq3", + "instantiation": "true", + "printer_model": "UltiMaker 2+", + "default_print_profile": "0.15mm Standard @UltiMaker 2+ 0.6 nozzle", + "default_filament_profile": [ + "Generic PLA @UltiMaker 2+ 0.6 nozzle" + ], + "printer_variant": "0.6" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.8 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.8 nozzle.json new file mode 100644 index 0000000000..71cbc26d1c --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2+ 0.8 nozzle.json @@ -0,0 +1,14 @@ +{ + "type": "machine", + "name": "UltiMaker 2+ 0.8 nozzle", + "inherits": "UltiMaker 2 0.8 nozzle", + "from": "system", + "setting_id": "1KcSsT7oyjqv2yei", + "instantiation": "true", + "printer_model": "UltiMaker 2+", + "default_print_profile": "0.20mm Standard @UltiMaker 2+ 0.8 nozzle", + "default_filament_profile": [ + "Generic PLA @UltiMaker 2+ 0.8 nozzle" + ], + "printer_variant": "0.8" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2+.json b/resources/profiles/UltiMaker/machine/UltiMaker 2+.json new file mode 100644 index 0000000000..f116cdfc4e --- /dev/null +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2+.json @@ -0,0 +1,12 @@ +{ + "type": "machine_model", + "name": "UltiMaker 2+", + "model_id": "UltiMaker-2-plus", + "nozzle_diameter": "0.4;0.6;0.8", + "machine_tech": "FFF", + "family": "UltiMaker", + "bed_model": "ultimaker_2_buildplate_model.stl", + "bed_texture": "ultimaker_2_buildplate_texture.png", + "hotend_model": "ultimaker_hotend.stl", + "default_materials": "Generic ABS @UltiMaker 2+ 0.4 nozzle;Generic PETG @UltiMaker 2+ 0.4 nozzle;Generic PLA @UltiMaker 2+ 0.4 nozzle;Generic ABS @UltiMaker 2+ 0.6 nozzle;Generic PETG @UltiMaker 2+ 0.6 nozzle;Generic PLA @UltiMaker 2+ 0.6 nozzle;Generic ABS @UltiMaker 2+ 0.8 nozzle;Generic PETG @UltiMaker 2+ 0.8 nozzle;Generic PLA @UltiMaker 2+ 0.8 nozzle" +} diff --git a/resources/profiles/UltiMaker/machine/UltiMaker 2.json b/resources/profiles/UltiMaker/machine/UltiMaker 2.json index eac25a733c..aa01814874 100644 --- a/resources/profiles/UltiMaker/machine/UltiMaker 2.json +++ b/resources/profiles/UltiMaker/machine/UltiMaker 2.json @@ -1,12 +1,12 @@ { "type": "machine_model", - "name": "UltiMaker 2", - "model_id": "UltiMaker-2", - "nozzle_diameter": "0.4", + "name": "UltiMaker 2", + "model_id": "UltiMaker-2", + "nozzle_diameter": "0.4;0.6;0.8", "machine_tech": "FFF", "family": "UltiMaker", "bed_model": "ultimaker_2_buildplate_model.stl", "bed_texture": "ultimaker_2_buildplate_texture.png", "hotend_model": "ultimaker_hotend.stl", - "default_materials": "Generic ABS @System;Generic PETG @System;Generic PLA @System" + "default_materials": "Generic ABS @UltiMaker 2 0.4 nozzle;Generic PETG @UltiMaker 2 0.4 nozzle;Generic PLA @UltiMaker 2 0.4 nozzle;Generic ABS @UltiMaker 2 0.6 nozzle;Generic PETG @UltiMaker 2 0.6 nozzle;Generic PLA @UltiMaker 2 0.6 nozzle;Generic ABS @UltiMaker 2 0.8 nozzle;Generic PETG @UltiMaker 2 0.8 nozzle;Generic PLA @UltiMaker 2 0.8 nozzle" } diff --git a/resources/profiles/UltiMaker/machine/UltiMaker S5 0.4 nozzle.json b/resources/profiles/UltiMaker/machine/UltiMaker S5 0.4 nozzle.json index 5c212070b7..7ed7c97f40 100644 --- a/resources/profiles/UltiMaker/machine/UltiMaker S5 0.4 nozzle.json +++ b/resources/profiles/UltiMaker/machine/UltiMaker S5 0.4 nozzle.json @@ -20,62 +20,93 @@ "printable_height": "300", "extruder_clearance_height_to_rod": "60", "extruder_clearance_radius": "61", - "nozzle_type": "brass", + "nozzle_type": [ + "brass", + "brass" + ], "auxiliary_fan": "0", "use_relative_e_distances": "0", "machine_max_acceleration_extruding": [ + "3500", + "3500", "3500", "3500" ], "machine_max_acceleration_retracting": [ + "3500", + "3500", "3500", "3500" ], "machine_max_acceleration_travel": [ + "3500", + "3500", "3500", "3500" ], "machine_max_acceleration_x": [ + "3500", + "3500", "3500", "3500" ], "machine_max_acceleration_y": [ + "3500", + "3500", "3500", "3500" ], "machine_max_acceleration_z": [ + "500", + "500", "500", "500" ], "machine_max_speed_e": [ + "120", + "120", "120", "120" ], "machine_max_speed_x": [ + "500", + "500", "500", "500" ], "machine_max_speed_y": [ + "500", + "500", "500", "500" ], "machine_max_speed_z": [ + "12", + "12", "12", "12" ], "machine_max_jerk_e": [ + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "20", + "20", "20", "20" ], "machine_max_jerk_y": [ + "20", + "20", "20", "20" ], "machine_max_jerk_z": [ + "0.4", + "0.4", "0.4", "0.4" ], @@ -89,24 +120,31 @@ ], "printer_settings_id": "Qidi", "retraction_minimum_travel": [ + "5", "5" ], "retract_before_wipe": [ + "70%", "70%" ], "retraction_length": [ + "4.5", "4.5" ], "retract_length_toolchange": [ + "11", "11" ], "retraction_speed": [ + "45", "45" ], "deretraction_speed": [ + "0", "0" ], "wipe_distance": [ + "0.2", "0.2" ], "single_extruder_multi_material": "0", @@ -116,9 +154,11 @@ "Generic PLA @System" ], "z_hop": [ + "1", "1" ], "z_hop_types": [ + "Normal Lift", "Normal Lift" ], "extruder_type": [ diff --git a/resources/profiles/UltiMaker/machine/fdm_machine_common.json b/resources/profiles/UltiMaker/machine/fdm_machine_common.json index 2f5795627a..c1536f7f7d 100644 --- a/resources/profiles/UltiMaker/machine/fdm_machine_common.json +++ b/resources/profiles/UltiMaker/machine/fdm_machine_common.json @@ -1,117 +1,135 @@ { - "type": "machine", - "name": "fdm_machine_common", - "from": "system", - "instantiation": "false", - "printer_technology": "FFF", - "deretraction_speed": [ - "40" - ], - "extruder_colour": [ - "#FCE94F" - ], - "extruder_offset": [ - "0x0" - ], - "gcode_flavor": "marlin", - "machine_max_acceleration_e": [ - "10000" - ], - "machine_max_acceleration_extruding": [ - "1500" - ], - "machine_max_acceleration_retracting": [ - "1500" - ], - "machine_max_acceleration_x": [ - "3000" - ], - "machine_max_acceleration_y": [ - "3000" - ], - "machine_max_acceleration_z": [ - "500" - ], - "machine_max_speed_e": [ - "120" - ], - "machine_max_speed_x": [ - "500" - ], - "machine_max_speed_y": [ - "500" - ], - "machine_max_speed_z": [ - "12" - ], - "machine_max_jerk_e": [ - "2.5" - ], - "machine_max_jerk_x": [ - "20" - ], - "machine_max_jerk_y": [ - "20" - ], - "machine_max_jerk_z": [ - "0.4" - ], - "machine_min_extruding_rate": [ - "0" - ], - "machine_min_travel_rate": [ - "0" - ], - "max_layer_height": [ - "0.3" - ], - "min_layer_height": [ - "0.07" - ], - "printable_height": "212", - "extruder_clearance_radius": "65", - "extruder_clearance_height_to_rod": "36", - "extruder_clearance_height_to_lid": "140", - "nozzle_diameter": [ - "0.4" - ], - "printer_settings_id": "", - "printer_variant": "0.4", - "retraction_minimum_travel": [ - "2" - ], - "retract_before_wipe": [ - "0%" - ], - "retract_when_changing_layer": [ - "1" - ], - "retraction_length": [ - "6" - ], - "retract_length_toolchange": [ - "10" - ], - "z_hop": [ - "0" - ], - "retract_restart_extra": [ - "0" - ], - "retract_restart_extra_toolchange": [ - "0" - ], - "retraction_speed": [ - "50" - ], - "single_extruder_multi_material": "1", - "change_filament_gcode": "", - "wipe": [ - "1" - ], - "default_print_profile": "", - "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", - "machine_start_gcode": "", - "machine_end_gcode": "", - "thumbnails": "" + "type": "machine", + "name": "fdm_machine_common", + "from": "system", + "instantiation": "false", + "printer_technology": "FFF", + "deretraction_speed": [ + "40" + ], + "extruder_colour": [ + "#FCE94F" + ], + "extruder_offset": [ + "0x0" + ], + "gcode_flavor": "marlin", + "auxiliary_fan": "0", + "machine_max_acceleration_travel": [ + "3000", + "3000" + ], + "machine_max_junction_deviation": [ + "0.013", + "0" + ], + "machine_max_acceleration_e": [ + "5000" + ], + "machine_max_acceleration_extruding": [ + "1500", + "1500" + ], + "machine_max_acceleration_retracting": [ + "1500", + "1500" + ], + "machine_max_acceleration_x": [ + "3000", + "3000" + ], + "machine_max_acceleration_y": [ + "3000", + "3000" + ], + "machine_max_acceleration_z": [ + "500", + "500" + ], + "machine_max_speed_e": [ + "100", + "100" + ], + "machine_max_speed_x": [ + "300", + "300" + ], + "machine_max_speed_y": [ + "300", + "300" + ], + "machine_max_speed_z": [ + "40", + "40" + ], + "machine_max_jerk_e": [ + "2.5", + "2.5" + ], + "machine_max_jerk_x": [ + "20", + "20" + ], + "machine_max_jerk_y": [ + "20", + "20" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_min_extruding_rate": [ + "0" + ], + "machine_min_travel_rate": [ + "0" + ], + "max_layer_height": [ + "0.3" + ], + "min_layer_height": [ + "0.08" + ], + "printer_settings_id": "", + "printer_variant": "0.4", + "retraction_minimum_travel": [ + "2" + ], + "retract_before_wipe": [ + "0%" + ], + "retract_when_changing_layer": [ + "1" + ], + "retraction_length": [ + "6" + ], + "retract_length_toolchange": [ + "25" + ], + "z_hop": [ + "0" + ], + "retract_restart_extra": [ + "0" + ], + "retract_restart_extra_toolchange": [ + "0" + ], + "retraction_speed": [ + "50" + ], + "single_extruder_multi_material": "1", + "change_filament_gcode": "", + "wipe": [ + "1" + ], + "wipe_distance": [ + "0.2" + ], + "machine_pause_gcode": "M0", + "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", + "machine_start_gcode": "; # # # # # # START Header\nG21; metric values\nG90; absolute positioning\nM82 ; set extruder to absolute mode\nM107; start with the fan off\n\nM140 S[bed_temperature_initial_layer_single]; start bed heating\n\nG28 X0 Y0 Z0; move X/Y/Z to endstops\nG1 X1 Y6 F15000; move X/Y to start position\nG1 Z35 F9000; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{hot_plate_temp_initial_layer[0] - 5}; wait for bed temperature - 5\nM140 S[bed_temperature_initial_layer_single]; continue bed heating\nM109 S[nozzle_temperature_initial_layer]; wait for nozzle temperature\n\n; Purge and prime\nM83; set extruder to relative mode\nG92 E0; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000\nG0 F1200 Z{initial_layer_print_height/2}; Cut the connection to priming blob\nG0 X100 F10000; disconnect with the prime blob\nG0 X50; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600; drag filament to decompress bowden tube\nG1 X100 F3200; wipe backwards a bit\nG1 X150 F3200; back to where there is no plastic: avoid dragging\nG92 E0; reset extruder reference\nM82; set extruder to absolute mode\n\n; # # # # # # END Header", + "machine_end_gcode": "; # # # # # # START Footer\nG91; relative coordinates\n;G1 E-1 F1200; retract the filament\nG1 Z+15 X-10 Y-10 E-7 F6000; move Z a bit\n; G1 X-10 Y-10 F6000; move XY a bit\nG1 E-5.5 F300; retract the filament\nG28 X0 Y0; move X/Y to min endstops, so the head is out of the way\nM104 S0; extruder heater off\nM140 S0; heated bed heater off (if you have it)\nM84; disable motors\n; # # # # # # END Footer\n", + "thumbnails": "" } diff --git a/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2 extended+.json b/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2 extended+.json new file mode 100644 index 0000000000..fd008304f7 --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2 extended+.json @@ -0,0 +1,9 @@ +{ + "type": "process", + "name": "0.10mm Fine @UltiMaker 2 extended+", + "inherits": "0.10mm Fine @UltiMaker 2+", + "from": "system", + "setting_id": "unx8qKjXQzjX8IL1", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.4 nozzle"] +} diff --git a/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2+.json b/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2+.json new file mode 100644 index 0000000000..aa6fb2f3ed --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2+.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "name": "0.10mm Fine @UltiMaker 2+", + "inherits": "0.10mm Fine @UltiMaker 2", + "from": "system", + "setting_id": "NunkyT8BK1PXysFl", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2.json new file mode 100644 index 0000000000..436df6e85b --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.10mm Fine @UltiMaker 2.json @@ -0,0 +1,41 @@ +{ + "type": "process", + "name": "0.10mm Fine @UltiMaker 2", + "renamed_from": "0.12mm Fine @UltiMaker 2", + + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "S211pmrcTyysKIZ4", + "instantiation": "true", + "layer_height": "0.10", + "initial_layer_infill_speed": [ + "45" + ], + "inner_wall_speed": [ + "30" + ], + "internal_solid_infill_speed": [ + "45" + ], + "outer_wall_speed": [ + "20" + ], + "small_perimeter_speed": [ + "20" + ], + "sparse_infill_speed": [ + "45" + ], + "support_interface_speed": [ + "50" + ], + "support_speed": [ + "50" + ], + "top_surface_speed": [ + "20" + ], + "compatible_printers": [ + "UltiMaker 2 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json deleted file mode 100644 index a71eed1b78..0000000000 --- a/resources/profiles/UltiMaker/process/0.12mm Fine @UltiMaker 2.json +++ /dev/null @@ -1,107 +0,0 @@ -{ - "type": "process", - "name": "0.12mm Fine @UltiMaker 2", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "4iVomDxutraufw6B", - "instantiation": "true", - "reduce_crossing_wall": "0", - "layer_height": "0.12", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "6", - "bottom_shell_thickness": "0", - "bridge_flow": "1", - "bridge_speed": "60", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "default_acceleration": "0", - "top_surface_acceleration": "0", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "crosshatch", - "initial_layer_acceleration": "500", - "travel_acceleration": "0", - "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.3", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "35%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_speed": "15", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", - "wall_loops": "2", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "3", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.2", - "support_filament": "0", - "support_line_width": "0.4", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.2", - "support_interface_speed": "100%", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "0.2", - "support_speed": "60", - "support_threshold_angle": "30", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonicline", - "top_surface_line_width": "0.4", - "top_shell_layers": "7", - "top_shell_thickness": "0.8", - "initial_layer_speed": "35%", - "initial_layer_infill_speed": "35%", - "outer_wall_speed": "200", - "inner_wall_speed": "300", - "internal_solid_infill_speed": "250", - "top_surface_speed": "200", - "gap_infill_speed": "250", - "sparse_infill_speed": "270", - "travel_speed": "150", - "enable_prime_tower": "1", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "compatible_printers": [ - "UltiMaker 2 0.4 nozzle" - ] -} diff --git a/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 0.6 nozzle.json b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 0.6 nozzle.json new file mode 100644 index 0000000000..5dfed2142f --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 0.6 nozzle.json @@ -0,0 +1,18 @@ +{ + "type": "process", + "name": "0.15mm Standard @UltiMaker 2 0.6 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "MDKnppk0uwm6HnKz", + "instantiation": "true", + "layer_height": "0.15", + "initial_layer_line_width": "0.6", + "inner_wall_line_width": "0.6", + "internal_solid_infill_line_width": "0.6", + "line_width": "0.6", + "outer_wall_line_width": "0.6", + "sparse_infill_line_width": "0.6", + "support_line_width": "0.55", + "top_surface_line_width": "0.6", + "compatible_printers": ["UltiMaker 2 0.6 nozzle"] +} diff --git a/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 extended+ 0.6 nozzle.json b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 extended+ 0.6 nozzle.json new file mode 100644 index 0000000000..d41516f825 --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 extended+ 0.6 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "process", + "name": "0.15mm Standard @UltiMaker 2 extended+ 0.6 nozzle", + "inherits": "0.15mm Standard @UltiMaker 2+ 0.6 nozzle", + "from": "system", + "setting_id": "ODmg35VjyLPysmRm", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.6 nozzle"] +} diff --git a/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 extended+.json b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 extended+.json new file mode 100644 index 0000000000..e7bf5cfe7a --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2 extended+.json @@ -0,0 +1,9 @@ +{ + "type": "process", + "name": "0.15mm Standard @UltiMaker 2 extended+", + "inherits": "0.15mm Standard @UltiMaker 2+", + "from": "system", + "setting_id": "hThxh6XoFAmcRMeW", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.4 nozzle"] +} diff --git a/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2+ 0.6 nozzle.json b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2+ 0.6 nozzle.json new file mode 100644 index 0000000000..11110c24bb --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2+ 0.6 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "name": "0.15mm Standard @UltiMaker 2+ 0.6 nozzle", + "inherits": "0.15mm Standard @UltiMaker 2 0.6 nozzle", + "from": "system", + "setting_id": "WhWdCNGc5WJC2wPy", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.6 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2+.json b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2+.json new file mode 100644 index 0000000000..c71005b5c5 --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2+.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "name": "0.15mm Standard @UltiMaker 2+", + "inherits": "0.15mm Standard @UltiMaker 2", + "from": "system", + "setting_id": "B1wRaMeJfyNAYxjk", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2.json new file mode 100644 index 0000000000..897abb33c8 --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.15mm Standard @UltiMaker 2.json @@ -0,0 +1,14 @@ +{ + "type": "process", + "name": "0.15mm Standard @UltiMaker 2", + "renamed_from": "0.18mm Standard @UltiMaker 2", + + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "DMwYsBx9nEttVhhP", + "instantiation": "true", + "layer_height": "0.15", + "compatible_printers": [ + "UltiMaker 2 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json deleted file mode 100644 index 5026572ee8..0000000000 --- a/resources/profiles/UltiMaker/process/0.18mm Standard @UltiMaker 2.json +++ /dev/null @@ -1,108 +0,0 @@ -{ - "type": "process", - "name": "0.18mm Standard @UltiMaker 2", - "inherits": "fdm_process_common", - "from": "system", - "setting_id": "Mo2NUdUehA5y4OwV", - "instantiation": "true", - "reduce_crossing_wall": "0", - "layer_height": "0.18", - "max_travel_detour_distance": "0", - "bottom_surface_pattern": "monotonic", - "bottom_shell_layers": "4", - "bottom_shell_thickness": "0.8", - "bridge_flow": "1", - "bridge_speed": "60", - "brim_width": "0", - "brim_object_gap": "0", - "compatible_printers_condition": "", - "print_sequence": "by layer", - "default_acceleration": "0", - "top_surface_acceleration": "0", - "bridge_no_support": "0", - "draft_shield": "disabled", - "elefant_foot_compensation": "0", - "enable_arc_fitting": "0", - "outer_wall_line_width": "0.4", - "wall_infill_order": "inner wall/outer wall/infill", - "line_width": "0.45", - "infill_direction": "45", - "sparse_infill_density": "20%", - "sparse_infill_pattern": "crosshatch", - "initial_layer_acceleration": "500", - "travel_acceleration": "0", - "inner_wall_acceleration": "0", - "initial_layer_line_width": "0.45", - "initial_layer_print_height": "0.25", - "infill_combination": "0", - "sparse_infill_line_width": "0.5", - "infill_wall_overlap": "35%", - "interface_shells": "0", - "ironing_flow": "15%", - "ironing_spacing": "0.1", - "ironing_speed": "15", - "ironing_type": "no ironing", - "reduce_infill_retraction": "1", - "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode", - "detect_overhang_wall": "1", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "20", - "overhang_3_4_speed": "15", - "overhang_4_4_speed": "10", - "inner_wall_line_width": "0.45", - "wall_loops": "3", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "aligned", - "skirt_distance": "3", - "skirt_height": "1", - "skirt_loops": "2", - "minimum_sparse_infill_area": "10", - "internal_solid_infill_line_width": "0.45", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "resolution": "0.012", - "support_type": "normal(auto)", - "support_style": "grid", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.2", - "support_filament": "0", - "support_line_width": "0.45", - "support_interface_loop_pattern": "0", - "support_interface_filament": "0", - "support_interface_top_layers": "3", - "support_interface_bottom_layers": "-1", - "support_interface_spacing": "0.2", - "support_interface_speed": "100%", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "0.2", - "support_speed": "45", - "support_threshold_angle": "30", - "support_object_xy_distance": "50%", - "tree_support_branch_angle": "40", - "tree_support_wall_count": "0", - "detect_thin_wall": "1", - "top_surface_pattern": "monotonicline", - "top_surface_line_width": "0.4", - "top_shell_layers": "5", - "top_shell_thickness": "0.8", - "initial_layer_speed": "15", - "initial_layer_infill_speed": "30", - "initial_layer_travel_speed": "60", - "outer_wall_speed": "30", - "inner_wall_speed": "40", - "internal_solid_infill_speed": "40", - "top_surface_speed": "15", - "gap_infill_speed": "20", - "sparse_infill_speed": "40", - "travel_speed": "120", - "enable_prime_tower": "1", - "wipe_tower_no_sparse_layers": "0", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0", - "compatible_printers": [ - "UltiMaker 2 0.4 nozzle" - ] -} diff --git a/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2 extended+.json b/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2 extended+.json new file mode 100644 index 0000000000..5ca0914ab7 --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2 extended+.json @@ -0,0 +1,9 @@ +{ + "type": "process", + "name": "0.20mm Draft @UltiMaker 2 extended+", + "inherits": "0.20mm Draft @UltiMaker 2+", + "from": "system", + "setting_id": "WOioHgeBkOd6k8xv", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.4 nozzle"] +} diff --git a/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2+.json b/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2+.json new file mode 100644 index 0000000000..985d6cbb39 --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2+.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "name": "0.20mm Draft @UltiMaker 2+", + "inherits": "0.20mm Draft @UltiMaker 2", + "from": "system", + "setting_id": "YYBsvqtDRBbOVymM", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2.json b/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2.json new file mode 100644 index 0000000000..ffe05bcd0f --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.20mm Draft @UltiMaker 2.json @@ -0,0 +1,14 @@ +{ + "type": "process", + "name": "0.20mm Draft @UltiMaker 2", + "renamed_from": "0.25mm Draft @UltiMaker 2;0.25mm Darft @UltiMaker 2", + + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "0ER4fay08CyW7RBE", + "instantiation": "true", + "layer_height": "0.2", + "compatible_printers": [ + "UltiMaker 2 0.4 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2 0.8 nozzle.json b/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2 0.8 nozzle.json new file mode 100644 index 0000000000..3a2c5b0ac1 --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2 0.8 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "process", + "name": "0.20mm Standard @UltiMaker 2 0.8 nozzle", + "inherits": "fdm_process_common", + "from": "system", + "setting_id": "3uZgBgrpfxrgO72L", + "instantiation": "true", + "layer_height": "0.20", + "initial_layer_line_width": "0.8", + "inner_wall_line_width": "0.8", + "internal_solid_infill_line_width": "0.8", + "line_width": "0.8", + "outer_wall_line_width": "0.8", + "sparse_infill_line_width": "0.8", + "support_line_width": "0.75", + "top_surface_line_width": "0.8", + "compatible_printers": [ + "UltiMaker 2 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2 extended+ 0.8 nozzle.json b/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2 extended+ 0.8 nozzle.json new file mode 100644 index 0000000000..a423edbeaa --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2 extended+ 0.8 nozzle.json @@ -0,0 +1,9 @@ +{ + "type": "process", + "name": "0.20mm Standard @UltiMaker 2 extended+ 0.8 nozzle", + "inherits": "0.20mm Standard @UltiMaker 2+ 0.8 nozzle", + "from": "system", + "setting_id": "NVU7KQjM3gC4OdDf", + "instantiation": "true", + "compatible_printers": ["UltiMaker 2 extended+ 0.8 nozzle"] +} diff --git a/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2+ 0.8 nozzle.json b/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2+ 0.8 nozzle.json new file mode 100644 index 0000000000..d75052e17c --- /dev/null +++ b/resources/profiles/UltiMaker/process/0.20mm Standard @UltiMaker 2+ 0.8 nozzle.json @@ -0,0 +1,11 @@ +{ + "type": "process", + "name": "0.20mm Standard @UltiMaker 2+ 0.8 nozzle", + "inherits": "0.20mm Standard @UltiMaker 2 0.8 nozzle", + "from": "system", + "setting_id": "DPdijbiqpZNuZr58", + "instantiation": "true", + "compatible_printers": [ + "UltiMaker 2+ 0.8 nozzle" + ] +} diff --git a/resources/profiles/UltiMaker/process/fdm_process_common.json b/resources/profiles/UltiMaker/process/fdm_process_common.json index 45c9bcf236..04c303af75 100644 --- a/resources/profiles/UltiMaker/process/fdm_process_common.json +++ b/resources/profiles/UltiMaker/process/fdm_process_common.json @@ -3,67 +3,75 @@ "name": "fdm_process_common", "from": "system", "instantiation": "false", - "reduce_crossing_wall": "0", - "bridge_flow": "0.95", - "bridge_speed": "25", - "brim_width": "5", - "compatible_printers": [], - "print_sequence": "by layer", - "default_acceleration": "0", - "bridge_no_support": "0", - "elefant_foot_compensation": "0.1", + "bottom_shell_layers": "5", + "bottom_shell_thickness": "0.75", + "fuzzy_skin_point_distance": "0.8", + "fuzzy_skin_thickness": "0.3", + "gap_infill_speed": [ + "40" + ], + "infill_anchor": "2.5", + "infill_anchor_max": "12", + "infill_combination": "1", + "infill_combination_max_layer_height": "80%", + "initial_layer_line_width": "0.4", + "initial_layer_speed": [ + "20" + ], + "inner_wall_acceleration": [ + "800" + ], + "inner_wall_line_width": "0.4", + "inner_wall_speed": [ + "55" + ], + "internal_solid_infill_line_width": "0.4", + "internal_solid_infill_speed": [ + "60" + ], + "is_infill_first": "1", + "line_width": "0.4", "outer_wall_line_width": "0.4", - "outer_wall_speed": "120", - "line_width": "0.45", - "infill_direction": "45", - "sparse_infill_density": "15%", - "sparse_infill_pattern": "crosshatch", - "initial_layer_line_width": "0.42", - "initial_layer_print_height": "0.2", - "initial_layer_speed": "20", - "gap_infill_speed": "30", - "infill_combination": "0", - "sparse_infill_line_width": "0.45", - "infill_wall_overlap": "25%", - "sparse_infill_speed": "50", - "interface_shells": "0", - "detect_overhang_wall": "0", - "reduce_infill_retraction": "0", - "filename_format": "{input_filename_base}.gcode", - "wall_loops": "3", - "inner_wall_line_width": "0.45", - "inner_wall_speed": "40", - "print_settings_id": "", - "raft_layers": "0", - "seam_position": "nearest", - "skirt_distance": "2", - "skirt_height": "2", - "minimum_sparse_infill_area": "0", - "internal_solid_infill_line_width": "0.45", - "internal_solid_infill_speed": "40", - "spiral_mode": "0", - "standby_temperature_delta": "-5", - "enable_support": "0", - "support_filament": "0", - "support_line_width": "0.42", - "support_interface_filament": "0", - "support_on_build_plate_only": "0", - "support_top_z_distance": "0.15", - "support_interface_loop_pattern": "0", - "support_interface_top_layers": "2", - "support_interface_spacing": "0", - "support_interface_speed": "80", - "support_base_pattern": "rectilinear", - "support_base_pattern_spacing": "2", - "support_speed": "40", - "support_threshold_angle": "30", - "support_object_xy_distance": "0.5", - "detect_thin_wall": "0", + "outer_wall_speed": [ + "40" + ], + "overhang_1_4_speed": [ + "25" + ], + "overhang_2_4_speed": [ + "20" + ], + "overhang_3_4_speed": [ + "15" + ], + "overhang_4_4_speed": [ + "15" + ], + "print_extruder_variant": [ + "Bowden Standard" + ], + "small_perimeter_speed": [ + "25" + ], + "sparse_infill_density": "18%", + "sparse_infill_line_width": "0.4", + "sparse_infill_speed": [ + "80" + ], + "support_interface_speed": [ + "55" + ], + "support_line_width": "0.35", + "support_speed": [ + "55" + ], + "top_shell_layers": "5", + "top_shell_thickness": "0.75", "top_surface_line_width": "0.4", - "top_surface_speed": "30", - "travel_speed": "400", - "enable_prime_tower": "1", - "prime_tower_width": "60", - "xy_hole_compensation": "0", - "xy_contour_compensation": "0" + "top_surface_speed": [ + "40" + ], + "travel_acceleration": [ + "800" + ] } diff --git a/resources/profiles/Volumic.json b/resources/profiles/Volumic.json index 7923f2d92f..a287eaadb9 100644 --- a/resources/profiles/Volumic.json +++ b/resources/profiles/Volumic.json @@ -1,6 +1,6 @@ { "name": "Volumic", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "1", "description": "VOLUMIC configurations", "machine_model_list": [ diff --git a/resources/profiles/Volumic/filament/PA6 CF20 (Performance).json b/resources/profiles/Volumic/filament/PA6 CF20 (Performance).json index 6b67c28f15..a05855a0be 100644 --- a/resources/profiles/Volumic/filament/PA6 CF20 (Performance).json +++ b/resources/profiles/Volumic/filament/PA6 CF20 (Performance).json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFcKtw8W", - "setting_id": "wuZ0EvlbcJ8GxajY", "name": "PA6 CF20 (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "wuZ0EvlbcJ8GxajY", + "filament_id": "OFcKtw8W", + "instantiation": "true", "filament_flow_ratio": [ "0.96" ], diff --git a/resources/profiles/Volumic/filament/PETG ESD (Performance).json b/resources/profiles/Volumic/filament/PETG ESD (Performance).json index 06814b64ad..bcf98c14cf 100644 --- a/resources/profiles/Volumic/filament/PETG ESD (Performance).json +++ b/resources/profiles/Volumic/filament/PETG ESD (Performance).json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFiwEbze", - "setting_id": "May8rNEMOOs1qtae", "name": "PETG ESD (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "May8rNEMOOs1qtae", + "filament_id": "OFiwEbze", + "instantiation": "true", "filament_type": [ "PETG-ESD" ], diff --git a/resources/profiles/Volumic/filament/PPS Carbone (Performance).json b/resources/profiles/Volumic/filament/PPS Carbone (Performance).json index 4708f912c4..4c1b5008d1 100644 --- a/resources/profiles/Volumic/filament/PPS Carbone (Performance).json +++ b/resources/profiles/Volumic/filament/PPS Carbone (Performance).json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFEZpel7", - "setting_id": "HE0yILdkhbiXbH1j", "name": "PPS Carbone (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "HE0yILdkhbiXbH1j", + "filament_id": "OFEZpel7", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic ABS Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic ABS Ultra Performance.json index 865f03155e..d4034d948d 100644 --- a/resources/profiles/Volumic/filament/Volumic ABS Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic ABS Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFyQwdaM", - "setting_id": "466ggy6ydgaZOrSx", "name": "Volumic ABS Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "466ggy6ydgaZOrSx", + "filament_id": "OFyQwdaM", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic ABS Ultra.json b/resources/profiles/Volumic/filament/Volumic ABS Ultra.json index f538936b5a..e14dc59a63 100644 --- a/resources/profiles/Volumic/filament/Volumic ABS Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic ABS Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFyUJI3q", - "setting_id": "omHiTINFPThooUqk", "name": "Volumic ABS Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_abs", + "from": "system", + "setting_id": "omHiTINFPThooUqk", + "filament_id": "OFyUJI3q", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic ASA Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic ASA Ultra Performance.json index 519387adf5..dd695adfa9 100644 --- a/resources/profiles/Volumic/filament/Volumic ASA Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic ASA Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFU7CKZt", - "setting_id": "uE5jxeOBISvO5o7L", "name": "Volumic ASA Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "uE5jxeOBISvO5o7L", + "filament_id": "OFU7CKZt", + "instantiation": "true", "filament_flow_ratio": [ "0.96" ], diff --git a/resources/profiles/Volumic/filament/Volumic ASA Ultra.json b/resources/profiles/Volumic/filament/Volumic ASA Ultra.json index 2225125c3c..c7ddf544e6 100644 --- a/resources/profiles/Volumic/filament/Volumic ASA Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic ASA Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OF2EB9Iz", - "setting_id": "LOAp2zgQWqg1lQQ4", "name": "Volumic ASA Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_asa", + "from": "system", + "setting_id": "LOAp2zgQWqg1lQQ4", + "filament_id": "OF2EB9Iz", + "instantiation": "true", "filament_flow_ratio": [ "0.96" ], diff --git a/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra Performance.json index 54d0f89bb3..29b67af7be 100644 --- a/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFUH1aee", - "setting_id": "k5V3bjZrtr7t8zl0", "name": "Volumic FLEX93 Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "k5V3bjZrtr7t8zl0", + "filament_id": "OFUH1aee", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra.json b/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra.json index 84ccdc6d19..0dc1dd1f25 100644 --- a/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic FLEX93 Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFuxH0Uz", - "setting_id": "DXZ4Gp5XP5VCJTXY", "name": "Volumic FLEX93 Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_tpu", + "from": "system", + "setting_id": "DXZ4Gp5XP5VCJTXY", + "filament_id": "OFuxH0Uz", + "instantiation": "true", "filament_flow_ratio": [ "1.20" ], diff --git a/resources/profiles/Volumic/filament/Volumic NYLON Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic NYLON Ultra Performance.json index 8a4b44f59b..7e7c77f261 100644 --- a/resources/profiles/Volumic/filament/Volumic NYLON Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic NYLON Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFi90KlM", - "setting_id": "RC5gFyIejXWDJuHH", "name": "Volumic NYLON Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "RC5gFyIejXWDJuHH", + "filament_id": "OFi90KlM", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic NYLON Ultra.json b/resources/profiles/Volumic/filament/Volumic NYLON Ultra.json index 95c5f81a6a..9d1d5a868b 100644 --- a/resources/profiles/Volumic/filament/Volumic NYLON Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic NYLON Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFWa0NiB", - "setting_id": "AL4xDgN8EIYb3UrL", "name": "Volumic NYLON Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pa", + "from": "system", + "setting_id": "AL4xDgN8EIYb3UrL", + "filament_id": "OFWa0NiB", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PC Performance.json b/resources/profiles/Volumic/filament/Volumic PC Performance.json index d454de5688..3e36b87207 100644 --- a/resources/profiles/Volumic/filament/Volumic PC Performance.json +++ b/resources/profiles/Volumic/filament/Volumic PC Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFgSbX7E", - "setting_id": "ht6Ar3ilCkPT7geN", "name": "Volumic PC (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "ht6Ar3ilCkPT7geN", + "filament_id": "OFgSbX7E", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PC.json b/resources/profiles/Volumic/filament/Volumic PC.json index 12ea420585..46f1d63eb8 100644 --- a/resources/profiles/Volumic/filament/Volumic PC.json +++ b/resources/profiles/Volumic/filament/Volumic PC.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFaHjk1V", - "setting_id": "3pUnwXise3J77Qmc", "name": "Volumic PC", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pc", + "from": "system", + "setting_id": "3pUnwXise3J77Qmc", + "filament_id": "OFaHjk1V", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PCTG Ultra (Performance).json b/resources/profiles/Volumic/filament/Volumic PCTG Ultra (Performance).json index 5e20cb2922..2000a1e00b 100644 --- a/resources/profiles/Volumic/filament/Volumic PCTG Ultra (Performance).json +++ b/resources/profiles/Volumic/filament/Volumic PCTG Ultra (Performance).json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFTdauIq", - "setting_id": "NdegYSDVrQ4Rawtp", "name": "Volumic PCTG Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "NdegYSDVrQ4Rawtp", + "filament_id": "OFTdauIq", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PETG Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic PETG Ultra Performance.json index 6b98fc49d2..710dfb07f1 100644 --- a/resources/profiles/Volumic/filament/Volumic PETG Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic PETG Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFsD974q", - "setting_id": "bNcC5kGe9jOm7Ltu", "name": "Volumic PETG Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "bNcC5kGe9jOm7Ltu", + "filament_id": "OFsD974q", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone Performance.json b/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone Performance.json index 91827ebe80..9b08425013 100644 --- a/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone Performance.json +++ b/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFY0F5qA", - "setting_id": "IIFtCkVvHoLtxPxj", "name": "Volumic PETG Ultra carbone (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "IIFtCkVvHoLtxPxj", + "filament_id": "OFY0F5qA", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone.json b/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone.json index 137bad9d53..77753061a9 100644 --- a/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone.json +++ b/resources/profiles/Volumic/filament/Volumic PETG Ultra carbone.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFu08yGN", - "setting_id": "nOKT0adoQi3O7Tge", "name": "Volumic PETG Ultra carbone", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "nOKT0adoQi3O7Tge", + "filament_id": "OFu08yGN", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PETG Ultra.json b/resources/profiles/Volumic/filament/Volumic PETG Ultra.json index 8db07d0bab..b89510318e 100644 --- a/resources/profiles/Volumic/filament/Volumic PETG Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic PETG Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFG0kOKX", - "setting_id": "CuBXW7SqUeJOcxPP", "name": "Volumic PETG Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "CuBXW7SqUeJOcxPP", + "filament_id": "OFG0kOKX", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PLA Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic PLA Ultra Performance.json index 2a02fe7c88..38011bd086 100644 --- a/resources/profiles/Volumic/filament/Volumic PLA Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic PLA Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OF3dJf4E", - "setting_id": "8J2ZIz8ByFNEB9PC", "name": "Volumic PLA Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "8J2ZIz8ByFNEB9PC", + "filament_id": "OF3dJf4E", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PLA Ultra.json b/resources/profiles/Volumic/filament/Volumic PLA Ultra.json index 2e5f762d39..a3bb2d5ade 100644 --- a/resources/profiles/Volumic/filament/Volumic PLA Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic PLA Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFXuGxvQ", - "setting_id": "3BeQ60i4cOs3BfZn", "name": "Volumic PLA Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "3BeQ60i4cOs3BfZn", + "filament_id": "OFXuGxvQ", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PP Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic PP Ultra Performance.json index 3fafb8aac0..6033de8045 100644 --- a/resources/profiles/Volumic/filament/Volumic PP Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic PP Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFNSYu5h", - "setting_id": "nsiOJ8ExySR1RksQ", "name": "Volumic PP Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "nsiOJ8ExySR1RksQ", + "filament_id": "OFNSYu5h", + "instantiation": "true", "filament_flow_ratio": [ "1.0" ], diff --git a/resources/profiles/Volumic/filament/Volumic PP Ultra.json b/resources/profiles/Volumic/filament/Volumic PP Ultra.json index eba78219bc..b0b4d675fb 100644 --- a/resources/profiles/Volumic/filament/Volumic PP Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic PP Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFsFo7ms", - "setting_id": "UA91pv54dzbBRkFe", "name": "Volumic PP Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "UA91pv54dzbBRkFe", + "filament_id": "OFsFo7ms", + "instantiation": "true", "filament_flow_ratio": [ "1.24" ], diff --git a/resources/profiles/Volumic/filament/Volumic PVA Performance.json b/resources/profiles/Volumic/filament/Volumic PVA Performance.json index 199d33ed62..f4e7617cad 100644 --- a/resources/profiles/Volumic/filament/Volumic PVA Performance.json +++ b/resources/profiles/Volumic/filament/Volumic PVA Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFRkjhxK", - "setting_id": "L9ZTGhwNpVWT6E5j", "name": "Volumic PVA-BVOH (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pva", + "from": "system", + "setting_id": "L9ZTGhwNpVWT6E5j", + "filament_id": "OFRkjhxK", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic PVA.json b/resources/profiles/Volumic/filament/Volumic PVA.json index 24c28a89a5..87c5c0eda3 100644 --- a/resources/profiles/Volumic/filament/Volumic PVA.json +++ b/resources/profiles/Volumic/filament/Volumic PVA.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFGdP6Na", - "setting_id": "rw4bB5gYM6YF8v9e", "name": "Volumic PVA", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pva", + "from": "system", + "setting_id": "rw4bB5gYM6YF8v9e", + "filament_id": "OFGdP6Na", + "instantiation": "true", "filament_flow_ratio": [ "1.00" ], diff --git a/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra Performance.json b/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra Performance.json index 90562ebba2..00d3cb5470 100644 --- a/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra Performance.json +++ b/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra Performance.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFkGp50Y", - "setting_id": "rxVkBvMZYgHOoFW6", "name": "Volumic UNIVERSAL Ultra (Performance)", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "rxVkBvMZYgHOoFW6", + "filament_id": "OFkGp50Y", + "instantiation": "true", "filament_type": [ "UNIV" ], diff --git a/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra.json b/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra.json index ee50a25ffd..dde1298f20 100644 --- a/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra.json +++ b/resources/profiles/Volumic/filament/Volumic UNIVERSAL Ultra.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFpumhCM", - "setting_id": "6iOFERN4x6xBbtuT", "name": "Volumic UNIVERSAL Ultra", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "6iOFERN4x6xBbtuT", + "filament_id": "OFpumhCM", + "instantiation": "true", "filament_type": [ "UNIV" ], diff --git a/resources/profiles/Volumic/filament/desactive.json b/resources/profiles/Volumic/filament/desactive.json index 1c490c957e..0089e61965 100644 --- a/resources/profiles/Volumic/filament/desactive.json +++ b/resources/profiles/Volumic/filament/desactive.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFCuaCer", - "setting_id": "Sphn4hoDMpH2uy86", "name": "Désactivé", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", + "from": "system", + "setting_id": "Sphn4hoDMpH2uy86", + "filament_id": "OFCuaCer", + "instantiation": "true", "filament_flow_ratio": [ "0.1" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_abs.json b/resources/profiles/Volumic/filament/fdm_filament_abs.json index c959efccf7..02d839f175 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_abs.json +++ b/resources/profiles/Volumic/filament/fdm_filament_abs.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_abs", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "90" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_asa.json b/resources/profiles/Volumic/filament/fdm_filament_asa.json index 250673c190..d009bac400 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_asa.json +++ b/resources/profiles/Volumic/filament/fdm_filament_asa.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_asa", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_pa.json b/resources/profiles/Volumic/filament/fdm_filament_pa.json index f2b3db1bfd..9c86cca422 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_pa.json +++ b/resources/profiles/Volumic/filament/fdm_filament_pa.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pa", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "65" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_pc.json b/resources/profiles/Volumic/filament/fdm_filament_pc.json index 72cbc789dc..6bebbfecf4 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_pc.json +++ b/resources/profiles/Volumic/filament/fdm_filament_pc.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pc", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "0" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_pet.json b/resources/profiles/Volumic/filament/fdm_filament_pet.json index 14ab033789..5214dff875 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_pet.json +++ b/resources/profiles/Volumic/filament/fdm_filament_pet.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pet", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "60" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_pla.json b/resources/profiles/Volumic/filament/fdm_filament_pla.json index 2fc9a8ef1d..51e8fd14a8 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_pla.json +++ b/resources/profiles/Volumic/filament/fdm_filament_pla.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pla", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "fan_cooling_layer_time": [ "100" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_pp.json b/resources/profiles/Volumic/filament/fdm_filament_pp.json index 9c0f879608..0c654aa06f 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_pp.json +++ b/resources/profiles/Volumic/filament/fdm_filament_pp.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pp", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "90" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_pva.json b/resources/profiles/Volumic/filament/fdm_filament_pva.json index 549dd8bcc8..1c8b0ffc48 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_pva.json +++ b/resources/profiles/Volumic/filament/fdm_filament_pva.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_pva", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "60" ], diff --git a/resources/profiles/Volumic/filament/fdm_filament_tpu.json b/resources/profiles/Volumic/filament/fdm_filament_tpu.json index be647956f6..aba5d3fd64 100644 --- a/resources/profiles/Volumic/filament/fdm_filament_tpu.json +++ b/resources/profiles/Volumic/filament/fdm_filament_tpu.json @@ -1,9 +1,9 @@ { "type": "filament", "name": "fdm_filament_tpu", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "cool_plate_temp": [ "45" ], diff --git a/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json index 2a9fad874e..b16c9969cc 100644 --- a/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO42 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "38SnDDmFg2mCRcFt", "name": "EXO42 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "38SnDDmFg2mCRcFt", + "instantiation": "true", "printer_model": "EXO42", "default_print_profile": "Normal speed - 0.15mm", "host_type": "esp3d", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y419 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/EXO42 IDRE (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO42 IDRE (0.4 nozzle).json index e1b362df83..3c4e6f6ef4 100644 --- a/resources/profiles/Volumic/machine/EXO42 IDRE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO42 IDRE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "15K6j1YDiO2ubyZq", "name": "EXO42 IDRE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "15K6j1YDiO2ubyZq", + "instantiation": "true", "printer_model": "EXO42 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x420" ], "printable_height": "400", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/EXO42 IDRE COPY MODE (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO42 IDRE COPY MODE (0.4 nozzle).json index 0f6303fd19..77c44ae3de 100644 --- a/resources/profiles/Volumic/machine/EXO42 IDRE COPY MODE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO42 IDRE COPY MODE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "cNF164YBrD1xcG2h", "name": "EXO42 IDRE COPY MODE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "cNF164YBrD1xcG2h", + "instantiation": "true", "printer_model": "EXO42 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x420" ], "printable_height": "400", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/EXO42 IDRE MIRROR MODE (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO42 IDRE MIRROR MODE (0.4 nozzle).json index 1c5f5d1700..b3188dbbc4 100644 --- a/resources/profiles/Volumic/machine/EXO42 IDRE MIRROR MODE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO42 IDRE MIRROR MODE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "OMdv9AS4d4HDXYB7", "name": "EXO42 IDRE MIRROR MODE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "OMdv9AS4d4HDXYB7", + "instantiation": "true", "printer_model": "EXO42 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x420" ], "printable_height": "400", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/EXO42 Performance (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO42 Performance (0.4 nozzle).json index fbece162b5..4066c6e917 100644 --- a/resources/profiles/Volumic/machine/EXO42 Performance (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO42 Performance (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "uSgdeLwfwMCIF8jJ", "name": "EXO42 Performance (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "uSgdeLwfwMCIF8jJ", + "instantiation": "true", "printer_model": "EXO42 Performance", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/EXO42 Stage 2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO42 Stage 2 (0.4 nozzle).json index 978af519f6..0ae74783f7 100644 --- a/resources/profiles/Volumic/machine/EXO42 Stage 2 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO42 Stage 2 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "nFLSTPErGjQw6XnS", "name": "EXO42 Stage 2 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "nFLSTPErGjQw6XnS", + "instantiation": "true", "printer_model": "EXO42 Stage 2", "default_print_profile": "Normal speed (Stage 2) - 0.20mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json b/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json index 8ca2438da9..75ed1f5a42 100644 --- a/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 (0.6 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "N5hPPEyrF6WFPO8r", "name": "EXO65 (0.6 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "N5hPPEyrF6WFPO8r", + "instantiation": "true", "printer_model": "EXO65", "default_print_profile": "Normal speed - 0.15mm", "host_type": "esp3d", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y649 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/EXO65 IDRE (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO65 IDRE (0.4 nozzle).json index 8d67f7fa06..2f528e297c 100644 --- a/resources/profiles/Volumic/machine/EXO65 IDRE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 IDRE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "eInlnTPT9RXNQe0H", "name": "EXO65 IDRE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "eInlnTPT9RXNQe0H", + "instantiation": "true", "printer_model": "EXO65 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x650" ], "printable_height": "630", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/EXO65 IDRE COPY MODE (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO65 IDRE COPY MODE (0.4 nozzle).json index 6609ff57cc..5f3d3b2a40 100644 --- a/resources/profiles/Volumic/machine/EXO65 IDRE COPY MODE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 IDRE COPY MODE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "qTCFDCqFaq5Cr2MK", "name": "EXO65 IDRE COPY MODE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "qTCFDCqFaq5Cr2MK", + "instantiation": "true", "printer_model": "EXO65 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x650" ], "printable_height": "630", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/EXO65 IDRE MIRROR MODE (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO65 IDRE MIRROR MODE (0.4 nozzle).json index e331184117..3a3fe5d234 100644 --- a/resources/profiles/Volumic/machine/EXO65 IDRE MIRROR MODE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 IDRE MIRROR MODE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "CRmhnf8ONHFpDZ9p", "name": "EXO65 IDRE MIRROR MODE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "CRmhnf8ONHFpDZ9p", + "instantiation": "true", "printer_model": "EXO65 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x650" ], "printable_height": "630", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/EXO65 Performance (0.4 nozzle).json b/resources/profiles/Volumic/machine/EXO65 Performance (0.4 nozzle).json index 54c15d80b0..1e24b85f67 100644 --- a/resources/profiles/Volumic/machine/EXO65 Performance (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 Performance (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "Iokq2oBwJVaEwT9A", "name": "EXO65 Performance (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "Iokq2oBwJVaEwT9A", + "instantiation": "true", "printer_model": "EXO65 Performance", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/EXO65 Performance (0.6 nozzle).json b/resources/profiles/Volumic/machine/EXO65 Performance (0.6 nozzle).json index 8bbc66ef38..2f63efbec5 100644 --- a/resources/profiles/Volumic/machine/EXO65 Performance (0.6 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 Performance (0.6 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "WWrVx8eGg8rm1saw", "name": "EXO65 Performance (0.6 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "WWrVx8eGg8rm1saw", + "instantiation": "true", "printer_model": "EXO65 Performance", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/EXO65 Performance (0.8 nozzle).json b/resources/profiles/Volumic/machine/EXO65 Performance (0.8 nozzle).json index cb2b91161b..65a5b685a5 100644 --- a/resources/profiles/Volumic/machine/EXO65 Performance (0.8 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 Performance (0.8 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "4LGJDuCA7yAKGml3", "name": "EXO65 Performance (0.8 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "4LGJDuCA7yAKGml3", + "instantiation": "true", "printer_model": "EXO65 Performance", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/EXO65 Stage 2 (0.6 nozzle).json b/resources/profiles/Volumic/machine/EXO65 Stage 2 (0.6 nozzle).json index 735e1843bc..f3d7d90d76 100644 --- a/resources/profiles/Volumic/machine/EXO65 Stage 2 (0.6 nozzle).json +++ b/resources/profiles/Volumic/machine/EXO65 Stage 2 (0.6 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "jsBm1DhY7qw63SSI", "name": "EXO65 Stage 2 (0.6 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "jsBm1DhY7qw63SSI", + "instantiation": "true", "printer_model": "EXO65 Stage 2", "default_print_profile": "Normal speed (Stage 2) - 0.20mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json b/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json index a49591a421..944e773cc3 100644 --- a/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/SH65 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "EeJsStZPNfCT7WkW", "name": "SH65 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "EeJsStZPNfCT7WkW", + "instantiation": "true", "printer_model": "SH65", "default_print_profile": "Normal speed - 0.15mm", "host_type": "esp3d", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y299 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/SH65 IDRE (0.4 nozzle).json b/resources/profiles/Volumic/machine/SH65 IDRE (0.4 nozzle).json index a316163582..c695d8bc72 100644 --- a/resources/profiles/Volumic/machine/SH65 IDRE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/SH65 IDRE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "aKBeUSXzBU2qQIEE", "name": "SH65 IDRE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "aKBeUSXzBU2qQIEE", + "instantiation": "true", "printer_model": "SH65 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x300" ], "printable_height": "280", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/SH65 IDRE COPY MODE (0.4 nozzle).json b/resources/profiles/Volumic/machine/SH65 IDRE COPY MODE (0.4 nozzle).json index bcd01d002f..a2006840fd 100644 --- a/resources/profiles/Volumic/machine/SH65 IDRE COPY MODE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/SH65 IDRE COPY MODE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "abcf94SvavkMYyFU", "name": "SH65 IDRE COPY MODE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "abcf94SvavkMYyFU", + "instantiation": "true", "printer_model": "SH65 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x300" ], "printable_height": "280", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/SH65 IDRE MIRROR MODE (0.4 nozzle).json b/resources/profiles/Volumic/machine/SH65 IDRE MIRROR MODE (0.4 nozzle).json index 72c8ab938d..0b28b9287b 100644 --- a/resources/profiles/Volumic/machine/SH65 IDRE MIRROR MODE (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/SH65 IDRE MIRROR MODE (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "xBbVrJNCzJO4egUE", "name": "SH65 IDRE MIRROR MODE (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "xBbVrJNCzJO4egUE", + "instantiation": "true", "printer_model": "SH65 IDRE", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -20,7 +20,10 @@ "11x300" ], "printable_height": "280", - "nozzle_type": "undefine", + "nozzle_type": [ + "undefine", + "undefine" + ], "auxiliary_fan": "0", "gcode_flavor": "klipper", "max_layer_height": [ @@ -31,24 +34,37 @@ ], "printer_variant": "0.4", "retraction_minimum_travel": [ + "1", "1" ], "retraction_length": [ + "2.4", "2.4" ], "retraction_speed": [ + "30", "30" ], "deretraction_speed": [ + "30", "30" ], "machine_max_acceleration_x": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", + "4500", + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", + "50", + "50", "50" ], "single_extruder_multi_material": [ diff --git a/resources/profiles/Volumic/machine/SH65 Performance (0.4 nozzle).json b/resources/profiles/Volumic/machine/SH65 Performance (0.4 nozzle).json index 0163a27d65..e138bb5623 100644 --- a/resources/profiles/Volumic/machine/SH65 Performance (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/SH65 Performance (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "lmlG4rGxYKYkydUM", "name": "SH65 Performance (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "lmlG4rGxYKYkydUM", + "instantiation": "true", "printer_model": "SH65 Performance", "default_print_profile": "Performance 150 - 0.15mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/SH65 Stage 2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/SH65 Stage 2 (0.4 nozzle).json index 09c3802d10..7000359300 100644 --- a/resources/profiles/Volumic/machine/SH65 Stage 2 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/SH65 Stage 2 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "e3rpbhqZmSzuW5kA", "name": "SH65 Stage 2 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "e3rpbhqZmSzuW5kA", + "instantiation": "true", "printer_model": "SH65 Stage 2", "default_print_profile": "Normal speed (Stage 2) - 0.20mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json index 18f800df15..a7e9fa1e0e 100644 --- a/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS20MK2 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "xV2JznZ0imfZku62", "name": "VS20MK2 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "xV2JznZ0imfZku62", + "instantiation": "true", "printer_model": "VS20MK2", "default_print_profile": "Compatible speed - 0.15mm", "nozzle_diameter": [ @@ -40,12 +40,15 @@ "25" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y199 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json index e0c5195a1d..d3a905761f 100644 --- a/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30MK2 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "MnCC2SAgstB2WR50", "name": "VS30MK2 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "MnCC2SAgstB2WR50", + "instantiation": "true", "printer_model": "VS30MK2", "default_print_profile": "Compatible speed - 0.15mm", "nozzle_diameter": [ @@ -40,12 +40,15 @@ "25" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y299 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json index 72924347a3..53caa7025d 100644 --- a/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30MK3 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "KFPbLwO3vQqIuJ34", "name": "VS30MK3 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "KFPbLwO3vQqIuJ34", + "instantiation": "true", "printer_model": "VS30MK3", "default_print_profile": "Normal speed - 0.15mm", "host_type": "esp3d", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y299 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/VS30MK3 Stage 2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30MK3 Stage 2 (0.4 nozzle).json index d45f2a6b6b..9c4b1cac73 100644 --- a/resources/profiles/Volumic/machine/VS30MK3 Stage 2 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30MK3 Stage 2 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "XW58eNI9Y25FmAMR", "name": "VS30MK3 Stage 2 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "XW58eNI9Y25FmAMR", + "instantiation": "true", "printer_model": "VS30MK3 Stage 2", "default_print_profile": "Normal speed (Stage 2) - 0.20mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4000", "4000" ], "machine_max_acceleration_y": [ + "4000", "4000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/VS30SC (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30SC (0.4 nozzle).json index af49da615d..35d3c95fb8 100644 --- a/resources/profiles/Volumic/machine/VS30SC (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30SC (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "8HxzSP6HW9nOPphc", "name": "VS30SC (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "8HxzSP6HW9nOPphc", + "instantiation": "true", "printer_model": "VS30SC", "default_print_profile": "Normal speed - 0.15mm", "host_type": "esp3d", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y199 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json index 2e67106b5c..91a2619c97 100644 --- a/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30SC2 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "D9xXWUeeAAWmesfa", "name": "VS30SC2 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "D9xXWUeeAAWmesfa", + "instantiation": "true", "printer_model": "VS30SC2", "default_print_profile": "Normal speed - 0.15mm", "host_type": "esp3d", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y199 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/machine/VS30SC2 Performance (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30SC2 Performance (0.4 nozzle).json index b2e9318337..ece1ffc74b 100644 --- a/resources/profiles/Volumic/machine/VS30SC2 Performance (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30SC2 Performance (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "PKKfRBEEc0CGbh45", "name": "VS30SC2 Performance (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "PKKfRBEEc0CGbh45", + "instantiation": "true", "printer_model": "VS30SC2 Performance", "default_print_profile": "Normal performance VS30 - 0.20mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4500", "4500" ], "machine_max_acceleration_y": [ + "4500", "4500" ], "machine_max_acceleration_z": [ + "150", "150" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/VS30SC2 Stage 2 (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30SC2 Stage 2 (0.4 nozzle).json index 4d5fe68f1d..27ffffb74c 100644 --- a/resources/profiles/Volumic/machine/VS30SC2 Stage 2 (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30SC2 Stage 2 (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "2RWMRzJILLpB2W3V", "name": "VS30SC2 Stage 2 (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "2RWMRzJILLpB2W3V", + "instantiation": "true", "printer_model": "VS30SC2 Stage 2", "default_print_profile": "Normal speed (Stage 2) - 0.20mm", "host_type": "octoprint", @@ -42,12 +42,15 @@ "30" ], "machine_max_acceleration_x": [ + "4000", "4000" ], "machine_max_acceleration_y": [ + "4000", "4000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "START_PRINT BED=[first_layer_bed_temperature] EXTRUDER=[first_layer_temperature]", diff --git a/resources/profiles/Volumic/machine/VS30ULTRA (0.4 nozzle).json b/resources/profiles/Volumic/machine/VS30ULTRA (0.4 nozzle).json index a7ed6be9ac..b0d0774360 100644 --- a/resources/profiles/Volumic/machine/VS30ULTRA (0.4 nozzle).json +++ b/resources/profiles/Volumic/machine/VS30ULTRA (0.4 nozzle).json @@ -1,10 +1,10 @@ { "type": "machine", - "setting_id": "IZzmiYZXK5UBri4z", "name": "VS30ULTRA (0.4 nozzle)", - "from": "system", - "instantiation": "true", "inherits": "fdm_volumic_common", + "from": "system", + "setting_id": "IZzmiYZXK5UBri4z", + "instantiation": "true", "printer_model": "VS30ULTRA", "default_print_profile": "Normal speed - 0.15mm", "nozzle_diameter": [ @@ -40,12 +40,15 @@ "30" ], "machine_max_acceleration_x": [ + "2000", "2000" ], "machine_max_acceleration_y": [ + "2000", "2000" ], "machine_max_acceleration_z": [ + "50", "50" ], "machine_start_gcode": "M117 Demarrage\nM106 S0\nM140 S[first_layer_bed_temperature]\nM104 T0 S[first_layer_temperature]\nG28\nG90\nM82\nG92 E0\nG1 Z5 F600\nG1 X1 Y199 F6000\nM109 T0 S[first_layer_temperature]\nM300 P350\nG92 E0\nM117 Impression", diff --git a/resources/profiles/Volumic/process/Compatible speed - 0.10mm.json b/resources/profiles/Volumic/process/Compatible speed - 0.10mm.json index 0dfce3935f..0412c8baa0 100644 --- a/resources/profiles/Volumic/process/Compatible speed - 0.10mm.json +++ b/resources/profiles/Volumic/process/Compatible speed - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "0Gwgv9G1arp0ufdp", "name": "Compatible speed - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "0Gwgv9G1arp0ufdp", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Compatible speed - 0.15mm.json b/resources/profiles/Volumic/process/Compatible speed - 0.15mm.json index e8745de20f..ae7529e735 100644 --- a/resources/profiles/Volumic/process/Compatible speed - 0.15mm.json +++ b/resources/profiles/Volumic/process/Compatible speed - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Tp9t0BQZKkxCA8qZ", "name": "Compatible speed - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Tp9t0BQZKkxCA8qZ", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Compatible speed - 0.20mm.json b/resources/profiles/Volumic/process/Compatible speed - 0.20mm.json index 0e8644aa73..51faa259dd 100644 --- a/resources/profiles/Volumic/process/Compatible speed - 0.20mm.json +++ b/resources/profiles/Volumic/process/Compatible speed - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "z3fSJ5Y0JuhRQhOU", "name": "Compatible speed - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "z3fSJ5Y0JuhRQhOU", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Compatible speed - 0.25mm.json b/resources/profiles/Volumic/process/Compatible speed - 0.25mm.json index 28f94dda2c..3c90d17bf3 100644 --- a/resources/profiles/Volumic/process/Compatible speed - 0.25mm.json +++ b/resources/profiles/Volumic/process/Compatible speed - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "hfNxq9KnwJlS0gcr", "name": "Compatible speed - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "hfNxq9KnwJlS0gcr", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Compatible speed - 0.30mm.json b/resources/profiles/Volumic/process/Compatible speed - 0.30mm.json index 9f6d1ecb48..82334c0c28 100644 --- a/resources/profiles/Volumic/process/Compatible speed - 0.30mm.json +++ b/resources/profiles/Volumic/process/Compatible speed - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Pdg0wxAaJS0SR8AF", "name": "Compatible speed - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Pdg0wxAaJS0SR8AF", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Full performance - 0.10mm.json b/resources/profiles/Volumic/process/Full performance - 0.10mm.json index e672435e53..815eba6e85 100644 --- a/resources/profiles/Volumic/process/Full performance - 0.10mm.json +++ b/resources/profiles/Volumic/process/Full performance - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "BdckjC9G0PLHCMgf", "name": "Full performance - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "BdckjC9G0PLHCMgf", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Full performance - 0.15mm.json b/resources/profiles/Volumic/process/Full performance - 0.15mm.json index 71ca39fbab..654ca1a8e4 100644 --- a/resources/profiles/Volumic/process/Full performance - 0.15mm.json +++ b/resources/profiles/Volumic/process/Full performance - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "fx3iCV7mYY4FYrci", "name": "Full performance - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "fx3iCV7mYY4FYrci", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Full performance - 0.20mm.json b/resources/profiles/Volumic/process/Full performance - 0.20mm.json index 8834a822f0..d483ff14a7 100644 --- a/resources/profiles/Volumic/process/Full performance - 0.20mm.json +++ b/resources/profiles/Volumic/process/Full performance - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "vjm5CwY9lx6DOJZy", "name": "Full performance - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "vjm5CwY9lx6DOJZy", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Full performance - 0.25mm.json b/resources/profiles/Volumic/process/Full performance - 0.25mm.json index e977f22c25..67960e7751 100644 --- a/resources/profiles/Volumic/process/Full performance - 0.25mm.json +++ b/resources/profiles/Volumic/process/Full performance - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "q3EqyOZ87HZpBzvO", "name": "Full performance - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "q3EqyOZ87HZpBzvO", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Full performance - 0.30mm.json b/resources/profiles/Volumic/process/Full performance - 0.30mm.json index 8df0793a6a..e1fb5b97c2 100644 --- a/resources/profiles/Volumic/process/Full performance - 0.30mm.json +++ b/resources/profiles/Volumic/process/Full performance - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "EG1g0ef96ojgMo8K", "name": "Full performance - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "EG1g0ef96ojgMo8K", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Full performance DUAL - 0.10mm.json b/resources/profiles/Volumic/process/Full performance DUAL - 0.10mm.json index f58e4f6d66..3260c8d11c 100644 --- a/resources/profiles/Volumic/process/Full performance DUAL - 0.10mm.json +++ b/resources/profiles/Volumic/process/Full performance DUAL - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "WtBzcQwLoYPoNDbM", "name": "Full performance DUAL - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "WtBzcQwLoYPoNDbM", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Full performance DUAL - 0.15mm.json b/resources/profiles/Volumic/process/Full performance DUAL - 0.15mm.json index 90eceadcdb..a28a086055 100644 --- a/resources/profiles/Volumic/process/Full performance DUAL - 0.15mm.json +++ b/resources/profiles/Volumic/process/Full performance DUAL - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "QwgTvSeq1hLKGILo", "name": "Full performance DUAL - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "QwgTvSeq1hLKGILo", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Full performance DUAL - 0.20mm.json b/resources/profiles/Volumic/process/Full performance DUAL - 0.20mm.json index 8d674fa854..12b5e40946 100644 --- a/resources/profiles/Volumic/process/Full performance DUAL - 0.20mm.json +++ b/resources/profiles/Volumic/process/Full performance DUAL - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "BKpizWAIMDwwSaTu", "name": "Full performance DUAL - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "BKpizWAIMDwwSaTu", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Full performance DUAL - 0.25mm.json b/resources/profiles/Volumic/process/Full performance DUAL - 0.25mm.json index 586bc7220c..bfefd96ad8 100644 --- a/resources/profiles/Volumic/process/Full performance DUAL - 0.25mm.json +++ b/resources/profiles/Volumic/process/Full performance DUAL - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Oua2iEIMKavdJVHY", "name": "Full performance DUAL - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Oua2iEIMKavdJVHY", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Full performance DUAL - 0.30mm.json b/resources/profiles/Volumic/process/Full performance DUAL - 0.30mm.json index 915ac0527e..a90ed43159 100644 --- a/resources/profiles/Volumic/process/Full performance DUAL - 0.30mm.json +++ b/resources/profiles/Volumic/process/Full performance DUAL - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "W8bDRq0EMAasHC0C", "name": "Full performance DUAL - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "W8bDRq0EMAasHC0C", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Full performance VS30 - 0.10mm.json b/resources/profiles/Volumic/process/Full performance VS30 - 0.10mm.json index 4d6bba2889..ed305c1bf2 100644 --- a/resources/profiles/Volumic/process/Full performance VS30 - 0.10mm.json +++ b/resources/profiles/Volumic/process/Full performance VS30 - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "n3LCfOd6MlXqSaFM", "name": "Full performance VS30 - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "n3LCfOd6MlXqSaFM", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Full performance VS30 - 0.15mm.json b/resources/profiles/Volumic/process/Full performance VS30 - 0.15mm.json index f745a7d476..200ed5392d 100644 --- a/resources/profiles/Volumic/process/Full performance VS30 - 0.15mm.json +++ b/resources/profiles/Volumic/process/Full performance VS30 - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "WJxmd7QtAlD99oWO", "name": "Full performance VS30 - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "WJxmd7QtAlD99oWO", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Full performance VS30 - 0.20mm.json b/resources/profiles/Volumic/process/Full performance VS30 - 0.20mm.json index 9f6e156e04..701e10a173 100644 --- a/resources/profiles/Volumic/process/Full performance VS30 - 0.20mm.json +++ b/resources/profiles/Volumic/process/Full performance VS30 - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "6O8V3laqfmS31DpL", "name": "Full performance VS30 - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "6O8V3laqfmS31DpL", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Full performance VS30 - 0.25mm.json b/resources/profiles/Volumic/process/Full performance VS30 - 0.25mm.json index a10387ee11..213b48ff7a 100644 --- a/resources/profiles/Volumic/process/Full performance VS30 - 0.25mm.json +++ b/resources/profiles/Volumic/process/Full performance VS30 - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "q5Df9Zk0bBsl6tgn", "name": "Full performance VS30 - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "q5Df9Zk0bBsl6tgn", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Full performance VS30 - 0.30mm.json b/resources/profiles/Volumic/process/Full performance VS30 - 0.30mm.json index b642805e57..25ed597749 100644 --- a/resources/profiles/Volumic/process/Full performance VS30 - 0.30mm.json +++ b/resources/profiles/Volumic/process/Full performance VS30 - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "4xhjCaz0oSdj4dmz", "name": "Full performance VS30 - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "4xhjCaz0oSdj4dmz", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/High performance - 0.10mm.json b/resources/profiles/Volumic/process/High performance - 0.10mm.json index 5897a066ec..904fdafe90 100644 --- a/resources/profiles/Volumic/process/High performance - 0.10mm.json +++ b/resources/profiles/Volumic/process/High performance - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "gkRJ4aBb8nYiWWkQ", "name": "High performance - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "gkRJ4aBb8nYiWWkQ", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/High performance - 0.15mm.json b/resources/profiles/Volumic/process/High performance - 0.15mm.json index a0d2b72904..bd69845550 100644 --- a/resources/profiles/Volumic/process/High performance - 0.15mm.json +++ b/resources/profiles/Volumic/process/High performance - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "tZ9EVpNMRCnEh4QD", "name": "High performance - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "tZ9EVpNMRCnEh4QD", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/High performance - 0.20mm.json b/resources/profiles/Volumic/process/High performance - 0.20mm.json index d021e40286..d54872d1e0 100644 --- a/resources/profiles/Volumic/process/High performance - 0.20mm.json +++ b/resources/profiles/Volumic/process/High performance - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "yCDzVcIWjVgIyIRH", "name": "High performance - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "yCDzVcIWjVgIyIRH", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/High performance - 0.25mm.json b/resources/profiles/Volumic/process/High performance - 0.25mm.json index 87b210962c..3afdc4d88e 100644 --- a/resources/profiles/Volumic/process/High performance - 0.25mm.json +++ b/resources/profiles/Volumic/process/High performance - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "x0Q3hHsXoY33V4Df", "name": "High performance - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "x0Q3hHsXoY33V4Df", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/High performance - 0.30mm.json b/resources/profiles/Volumic/process/High performance - 0.30mm.json index 2a9f73d564..37f878eaa0 100644 --- a/resources/profiles/Volumic/process/High performance - 0.30mm.json +++ b/resources/profiles/Volumic/process/High performance - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "wtWZKy5RUZxBEKiA", "name": "High performance - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "wtWZKy5RUZxBEKiA", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/High performance DUAL - 0.10mm.json b/resources/profiles/Volumic/process/High performance DUAL - 0.10mm.json index b8615a5a79..0df99510d2 100644 --- a/resources/profiles/Volumic/process/High performance DUAL - 0.10mm.json +++ b/resources/profiles/Volumic/process/High performance DUAL - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "AQxzb91WKNnqyR4m", "name": "High performance DUAL - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "AQxzb91WKNnqyR4m", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/High performance DUAL - 0.15mm.json b/resources/profiles/Volumic/process/High performance DUAL - 0.15mm.json index aac928ed9e..91e8ac1d00 100644 --- a/resources/profiles/Volumic/process/High performance DUAL - 0.15mm.json +++ b/resources/profiles/Volumic/process/High performance DUAL - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "L4Ok3bi0ZUYayKei", "name": "High performance DUAL - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "L4Ok3bi0ZUYayKei", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/High performance DUAL - 0.20mm.json b/resources/profiles/Volumic/process/High performance DUAL - 0.20mm.json index 820c72f251..75b896c99b 100644 --- a/resources/profiles/Volumic/process/High performance DUAL - 0.20mm.json +++ b/resources/profiles/Volumic/process/High performance DUAL - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "VzveNihkhzpEd8YX", "name": "High performance DUAL - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "VzveNihkhzpEd8YX", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/High performance DUAL - 0.25mm.json b/resources/profiles/Volumic/process/High performance DUAL - 0.25mm.json index 48f0784784..fa0cb751ac 100644 --- a/resources/profiles/Volumic/process/High performance DUAL - 0.25mm.json +++ b/resources/profiles/Volumic/process/High performance DUAL - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "SH11Eth4ecxaSafR", "name": "High performance DUAL - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "SH11Eth4ecxaSafR", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/High performance DUAL - 0.30mm.json b/resources/profiles/Volumic/process/High performance DUAL - 0.30mm.json index 9129a45457..5cce5309cd 100644 --- a/resources/profiles/Volumic/process/High performance DUAL - 0.30mm.json +++ b/resources/profiles/Volumic/process/High performance DUAL - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Rheh3fgJfFugxKZL", "name": "High performance DUAL - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Rheh3fgJfFugxKZL", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/High performance VS30 - 0.10mm.json b/resources/profiles/Volumic/process/High performance VS30 - 0.10mm.json index 3b458847e5..590a01dc87 100644 --- a/resources/profiles/Volumic/process/High performance VS30 - 0.10mm.json +++ b/resources/profiles/Volumic/process/High performance VS30 - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "nfaAKkhQ6yt2AC7o", "name": "High performance VS30 - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "nfaAKkhQ6yt2AC7o", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/High performance VS30 - 0.15mm.json b/resources/profiles/Volumic/process/High performance VS30 - 0.15mm.json index fd5e05ef6f..d4c32db171 100644 --- a/resources/profiles/Volumic/process/High performance VS30 - 0.15mm.json +++ b/resources/profiles/Volumic/process/High performance VS30 - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Eb3wJrmzg2nzEwAm", "name": "High performance VS30 - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Eb3wJrmzg2nzEwAm", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/High performance VS30 - 0.20mm.json b/resources/profiles/Volumic/process/High performance VS30 - 0.20mm.json index 34369239bc..4832e76664 100644 --- a/resources/profiles/Volumic/process/High performance VS30 - 0.20mm.json +++ b/resources/profiles/Volumic/process/High performance VS30 - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "qWEOT65KoPG51AJW", "name": "High performance VS30 - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "qWEOT65KoPG51AJW", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/High performance VS30 - 0.25mm.json b/resources/profiles/Volumic/process/High performance VS30 - 0.25mm.json index 969f1daa28..12412183e9 100644 --- a/resources/profiles/Volumic/process/High performance VS30 - 0.25mm.json +++ b/resources/profiles/Volumic/process/High performance VS30 - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Co6sQp00KLUD50WN", "name": "High performance VS30 - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Co6sQp00KLUD50WN", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/High performance VS30 - 0.30mm.json b/resources/profiles/Volumic/process/High performance VS30 - 0.30mm.json index 147e0cd217..82052d7055 100644 --- a/resources/profiles/Volumic/process/High performance VS30 - 0.30mm.json +++ b/resources/profiles/Volumic/process/High performance VS30 - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "3qVuLHagvoHBu2yP", "name": "High performance VS30 - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "3qVuLHagvoHBu2yP", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.10mm.json b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.10mm.json index 3fbe07956d..f0b2f6883d 100644 --- a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.10mm.json +++ b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "3vksM99YF7pwEP3G", "name": "High speed (Stage 2) - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "3vksM99YF7pwEP3G", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.15mm.json b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.15mm.json index 7a4313160a..816c6a4db1 100644 --- a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.15mm.json +++ b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "9k0mROwMyk1hxZm1", "name": "High speed (Stage 2) - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "9k0mROwMyk1hxZm1", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.20mm.json b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.20mm.json index 91d998c170..78b4f5304c 100644 --- a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.20mm.json +++ b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "s7GVelf1PDb0Qy9g", "name": "High speed (Stage 2) - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "s7GVelf1PDb0Qy9g", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.25mm.json b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.25mm.json index a3277f67a7..d4f6bb4fcf 100644 --- a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.25mm.json +++ b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Kxk9C4GtJ5tiwqes", "name": "High speed (Stage 2) - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Kxk9C4GtJ5tiwqes", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.30mm.json b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.30mm.json index 76bfe21286..5f92ab82ab 100644 --- a/resources/profiles/Volumic/process/High speed (Stage 2) - 0.30mm.json +++ b/resources/profiles/Volumic/process/High speed (Stage 2) - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "ireCZVAGHWDUN03m", "name": "High speed (Stage 2) - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "ireCZVAGHWDUN03m", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/High speed - 0.10mm.json b/resources/profiles/Volumic/process/High speed - 0.10mm.json index c86d7535c0..23af87c00a 100644 --- a/resources/profiles/Volumic/process/High speed - 0.10mm.json +++ b/resources/profiles/Volumic/process/High speed - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "ClExqnoYEdZmnnOX", "name": "High speed - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "ClExqnoYEdZmnnOX", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/High speed - 0.15mm.json b/resources/profiles/Volumic/process/High speed - 0.15mm.json index 0e3da3a700..5591b5ce93 100644 --- a/resources/profiles/Volumic/process/High speed - 0.15mm.json +++ b/resources/profiles/Volumic/process/High speed - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Wk6UnqxF8mQm9sE6", "name": "High speed - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Wk6UnqxF8mQm9sE6", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/High speed - 0.20mm.json b/resources/profiles/Volumic/process/High speed - 0.20mm.json index c37503c724..73bd79c338 100644 --- a/resources/profiles/Volumic/process/High speed - 0.20mm.json +++ b/resources/profiles/Volumic/process/High speed - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "72tWDDDqVKtRwBFH", "name": "High speed - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "72tWDDDqVKtRwBFH", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/High speed - 0.25mm.json b/resources/profiles/Volumic/process/High speed - 0.25mm.json index 10286f7196..9013811c1a 100644 --- a/resources/profiles/Volumic/process/High speed - 0.25mm.json +++ b/resources/profiles/Volumic/process/High speed - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Qx4TTWaVVzXqRCJ4", "name": "High speed - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Qx4TTWaVVzXqRCJ4", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/High speed - 0.30mm.json b/resources/profiles/Volumic/process/High speed - 0.30mm.json index abc18e3fc1..ddd88376d5 100644 --- a/resources/profiles/Volumic/process/High speed - 0.30mm.json +++ b/resources/profiles/Volumic/process/High speed - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "6h7mK5XKws51vPov", "name": "High speed - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "6h7mK5XKws51vPov", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Normal performance - 0.10mm.json b/resources/profiles/Volumic/process/Normal performance - 0.10mm.json index 7bc3240b5e..82c8f70bbf 100644 --- a/resources/profiles/Volumic/process/Normal performance - 0.10mm.json +++ b/resources/profiles/Volumic/process/Normal performance - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "FTqjZjQPPR7L9pO1", "name": "Normal performance - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "FTqjZjQPPR7L9pO1", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Normal performance - 0.15mm.json b/resources/profiles/Volumic/process/Normal performance - 0.15mm.json index a274e1263a..9dc7c991a2 100644 --- a/resources/profiles/Volumic/process/Normal performance - 0.15mm.json +++ b/resources/profiles/Volumic/process/Normal performance - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "JY670KAkuqNKq1pD", "name": "Normal performance - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "JY670KAkuqNKq1pD", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Normal performance - 0.20mm.json b/resources/profiles/Volumic/process/Normal performance - 0.20mm.json index e03c5bdafd..db61c2882a 100644 --- a/resources/profiles/Volumic/process/Normal performance - 0.20mm.json +++ b/resources/profiles/Volumic/process/Normal performance - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "6xUkj1ATyvZ9n69E", "name": "Normal performance - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "6xUkj1ATyvZ9n69E", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Normal performance - 0.25mm.json b/resources/profiles/Volumic/process/Normal performance - 0.25mm.json index 3b1db4b002..6c23dde43c 100644 --- a/resources/profiles/Volumic/process/Normal performance - 0.25mm.json +++ b/resources/profiles/Volumic/process/Normal performance - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "J2ZwCE8TcdUDJy9u", "name": "Normal performance - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "J2ZwCE8TcdUDJy9u", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Normal performance - 0.30mm.json b/resources/profiles/Volumic/process/Normal performance - 0.30mm.json index b75c0433c3..5e1d299bfd 100644 --- a/resources/profiles/Volumic/process/Normal performance - 0.30mm.json +++ b/resources/profiles/Volumic/process/Normal performance - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "TikIASel3dJuzlIC", "name": "Normal performance - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "TikIASel3dJuzlIC", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Normal performance DUAL - 0.10mm.json b/resources/profiles/Volumic/process/Normal performance DUAL - 0.10mm.json index 2fdfb80a54..b5d4a6e280 100644 --- a/resources/profiles/Volumic/process/Normal performance DUAL - 0.10mm.json +++ b/resources/profiles/Volumic/process/Normal performance DUAL - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "CPvAoewpDOyAUZzz", "name": "Normal performance DUAL - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "CPvAoewpDOyAUZzz", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Normal performance DUAL - 0.15mm.json b/resources/profiles/Volumic/process/Normal performance DUAL - 0.15mm.json index b231cbe91b..0e9afca6d9 100644 --- a/resources/profiles/Volumic/process/Normal performance DUAL - 0.15mm.json +++ b/resources/profiles/Volumic/process/Normal performance DUAL - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "lxzarnB1H22cOqIl", "name": "Normal performance DUAL - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "lxzarnB1H22cOqIl", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Normal performance DUAL - 0.20mm.json b/resources/profiles/Volumic/process/Normal performance DUAL - 0.20mm.json index bed3e748ab..5155807f9c 100644 --- a/resources/profiles/Volumic/process/Normal performance DUAL - 0.20mm.json +++ b/resources/profiles/Volumic/process/Normal performance DUAL - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "GNPkW4cAsenc06Qj", "name": "Normal performance DUAL - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "GNPkW4cAsenc06Qj", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Normal performance DUAL - 0.25mm.json b/resources/profiles/Volumic/process/Normal performance DUAL - 0.25mm.json index 87596fc890..680cce596f 100644 --- a/resources/profiles/Volumic/process/Normal performance DUAL - 0.25mm.json +++ b/resources/profiles/Volumic/process/Normal performance DUAL - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "VvM6yKMGis2PyNHn", "name": "Normal performance DUAL - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "VvM6yKMGis2PyNHn", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Normal performance DUAL - 0.30mm.json b/resources/profiles/Volumic/process/Normal performance DUAL - 0.30mm.json index a389180199..b57cddff40 100644 --- a/resources/profiles/Volumic/process/Normal performance DUAL - 0.30mm.json +++ b/resources/profiles/Volumic/process/Normal performance DUAL - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "ouPv4ZnFRqBIZTUQ", "name": "Normal performance DUAL - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "ouPv4ZnFRqBIZTUQ", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Normal performance VS30 - 0.10mm.json b/resources/profiles/Volumic/process/Normal performance VS30 - 0.10mm.json index fb120c03a5..6ad5f4ee3c 100644 --- a/resources/profiles/Volumic/process/Normal performance VS30 - 0.10mm.json +++ b/resources/profiles/Volumic/process/Normal performance VS30 - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "A1MeH5DTrbaapIvs", "name": "Normal performance VS30 - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "A1MeH5DTrbaapIvs", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Normal performance VS30 - 0.15mm.json b/resources/profiles/Volumic/process/Normal performance VS30 - 0.15mm.json index b95abd904f..c98275fcdc 100644 --- a/resources/profiles/Volumic/process/Normal performance VS30 - 0.15mm.json +++ b/resources/profiles/Volumic/process/Normal performance VS30 - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "RN31YrQ3X4sAgRji", "name": "Normal performance VS30 - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "RN31YrQ3X4sAgRji", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Normal performance VS30 - 0.20mm.json b/resources/profiles/Volumic/process/Normal performance VS30 - 0.20mm.json index 0657825c7b..067e282f0b 100644 --- a/resources/profiles/Volumic/process/Normal performance VS30 - 0.20mm.json +++ b/resources/profiles/Volumic/process/Normal performance VS30 - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "pW9nom8pyi48XeOB", "name": "Normal performance VS30 - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "pW9nom8pyi48XeOB", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Normal performance VS30 - 0.25mm.json b/resources/profiles/Volumic/process/Normal performance VS30 - 0.25mm.json index 0197bc775d..993043650d 100644 --- a/resources/profiles/Volumic/process/Normal performance VS30 - 0.25mm.json +++ b/resources/profiles/Volumic/process/Normal performance VS30 - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "O4mCyYEDLcYs9ksp", "name": "Normal performance VS30 - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "O4mCyYEDLcYs9ksp", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Normal performance VS30 - 0.30mm.json b/resources/profiles/Volumic/process/Normal performance VS30 - 0.30mm.json index 5f8a81f236..adf0a49d37 100644 --- a/resources/profiles/Volumic/process/Normal performance VS30 - 0.30mm.json +++ b/resources/profiles/Volumic/process/Normal performance VS30 - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Wl53R1wiaRjXyP4m", "name": "Normal performance VS30 - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Wl53R1wiaRjXyP4m", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.10mm.json b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.10mm.json index 7a4cca2086..fe50dbb494 100644 --- a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.10mm.json +++ b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "tc9ZLzQlKlARHNGw", "name": "Normal speed (Stage 2) - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "tc9ZLzQlKlARHNGw", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.15mm.json b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.15mm.json index 1b3bdfd473..832a7c9fde 100644 --- a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.15mm.json +++ b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "SIjHUj1PwWkFFffa", "name": "Normal speed (Stage 2) - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "SIjHUj1PwWkFFffa", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.20mm.json b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.20mm.json index 789a59c8e7..19e23678d4 100644 --- a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.20mm.json +++ b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "M0E4QeWLUVdWUHfJ", "name": "Normal speed (Stage 2) - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "M0E4QeWLUVdWUHfJ", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.25mm.json b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.25mm.json index 6b1a0c5fe3..98598db38c 100644 --- a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.25mm.json +++ b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "7RRVQg0tShBy6Xuj", "name": "Normal speed (Stage 2) - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "7RRVQg0tShBy6Xuj", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.30mm.json b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.30mm.json index 0243eff1b9..eb41b3f307 100644 --- a/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.30mm.json +++ b/resources/profiles/Volumic/process/Normal speed (Stage 2) - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "VeLRxlpx80B0fAVO", "name": "Normal speed (Stage 2) - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "VeLRxlpx80B0fAVO", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Normal speed - 0.10mm.json b/resources/profiles/Volumic/process/Normal speed - 0.10mm.json index 475b8436ca..4340058a3c 100644 --- a/resources/profiles/Volumic/process/Normal speed - 0.10mm.json +++ b/resources/profiles/Volumic/process/Normal speed - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "KYuX2erMe0Qnjqig", "name": "Normal speed - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "KYuX2erMe0Qnjqig", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Normal speed - 0.15mm.json b/resources/profiles/Volumic/process/Normal speed - 0.15mm.json index 5ee0b65a91..d66b440c70 100644 --- a/resources/profiles/Volumic/process/Normal speed - 0.15mm.json +++ b/resources/profiles/Volumic/process/Normal speed - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "ulLTG505AlCQyOVT", "name": "Normal speed - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "ulLTG505AlCQyOVT", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Normal speed - 0.20mm.json b/resources/profiles/Volumic/process/Normal speed - 0.20mm.json index 18f07ba295..338f88e5ec 100644 --- a/resources/profiles/Volumic/process/Normal speed - 0.20mm.json +++ b/resources/profiles/Volumic/process/Normal speed - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "5VK09EV5nZFZ8tDX", "name": "Normal speed - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "5VK09EV5nZFZ8tDX", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Normal speed - 0.25mm.json b/resources/profiles/Volumic/process/Normal speed - 0.25mm.json index a0400b22e5..fa82c4e443 100644 --- a/resources/profiles/Volumic/process/Normal speed - 0.25mm.json +++ b/resources/profiles/Volumic/process/Normal speed - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "sKsaHEmeYNos7Ap3", "name": "Normal speed - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "sKsaHEmeYNos7Ap3", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Normal speed - 0.30mm.json b/resources/profiles/Volumic/process/Normal speed - 0.30mm.json index 227cda5c1e..755f8d5297 100644 --- a/resources/profiles/Volumic/process/Normal speed - 0.30mm.json +++ b/resources/profiles/Volumic/process/Normal speed - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "fLtovREOpasPunPM", "name": "Normal speed - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "fLtovREOpasPunPM", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.10mm.json b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.10mm.json index d80d3230e4..89c5d317b7 100644 --- a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.10mm.json +++ b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "v29Kc1X5AEVhYRk8", "name": "Very high speed (Stage 2) - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "v29Kc1X5AEVhYRk8", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.15mm.json b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.15mm.json index fea250b867..b7e8ef3198 100644 --- a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.15mm.json +++ b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "IFk4SdxdsDe9XHA7", "name": "Very high speed (Stage 2) - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "IFk4SdxdsDe9XHA7", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.20mm.json b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.20mm.json index b308dbbf7e..b72013724a 100644 --- a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.20mm.json +++ b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "rnRfy0wN7TWGyq6y", "name": "Very high speed (Stage 2) - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "rnRfy0wN7TWGyq6y", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.25mm.json b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.25mm.json index 004cc14719..230c508040 100644 --- a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.25mm.json +++ b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Trb33VeRJfEhjvyw", "name": "Very high speed (Stage 2) - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Trb33VeRJfEhjvyw", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.30mm.json b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.30mm.json index b5225c859e..fa1030d684 100644 --- a/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.30mm.json +++ b/resources/profiles/Volumic/process/Very high speed (Stage 2) - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "A7yh9LBPEQ0kX3w4", "name": "Very high speed (Stage 2) - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "A7yh9LBPEQ0kX3w4", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Volumic/process/Very high speed - 0.10mm.json b/resources/profiles/Volumic/process/Very high speed - 0.10mm.json index 1b1e9c9108..e17dc83210 100644 --- a/resources/profiles/Volumic/process/Very high speed - 0.10mm.json +++ b/resources/profiles/Volumic/process/Very high speed - 0.10mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "ZqsUCKAhvogcqdcv", "name": "Very high speed - 0.10mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "ZqsUCKAhvogcqdcv", "instantiation": "true", "layer_height": "0.1", "initial_layer_print_height": "0.1", diff --git a/resources/profiles/Volumic/process/Very high speed - 0.15mm.json b/resources/profiles/Volumic/process/Very high speed - 0.15mm.json index 7e657c6498..5dda960dd4 100644 --- a/resources/profiles/Volumic/process/Very high speed - 0.15mm.json +++ b/resources/profiles/Volumic/process/Very high speed - 0.15mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "Ept7P07GPaZjDkH1", "name": "Very high speed - 0.15mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "Ept7P07GPaZjDkH1", "instantiation": "true", "layer_height": "0.15", "initial_layer_print_height": "0.15", diff --git a/resources/profiles/Volumic/process/Very high speed - 0.20mm.json b/resources/profiles/Volumic/process/Very high speed - 0.20mm.json index 5f12b90d5e..57e3372edb 100644 --- a/resources/profiles/Volumic/process/Very high speed - 0.20mm.json +++ b/resources/profiles/Volumic/process/Very high speed - 0.20mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "1I77SBl6Oe7z8QVf", "name": "Very high speed - 0.20mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "1I77SBl6Oe7z8QVf", "instantiation": "true", "layer_height": "0.2", "initial_layer_print_height": "0.2", diff --git a/resources/profiles/Volumic/process/Very high speed - 0.25mm.json b/resources/profiles/Volumic/process/Very high speed - 0.25mm.json index eede1a2bf3..41ff717f9c 100644 --- a/resources/profiles/Volumic/process/Very high speed - 0.25mm.json +++ b/resources/profiles/Volumic/process/Very high speed - 0.25mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "qy4K1ha3a6cbW0sw", "name": "Very high speed - 0.25mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "qy4K1ha3a6cbW0sw", "instantiation": "true", "layer_height": "0.25", "initial_layer_print_height": "0.25", diff --git a/resources/profiles/Volumic/process/Very high speed - 0.30mm.json b/resources/profiles/Volumic/process/Very high speed - 0.30mm.json index b6148c6aa6..2f34c6107d 100644 --- a/resources/profiles/Volumic/process/Very high speed - 0.30mm.json +++ b/resources/profiles/Volumic/process/Very high speed - 0.30mm.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "4up2FChqWIEn6vYl", "name": "Very high speed - 0.30mm", - "from": "system", "inherits": "fdm_process_volumic_common", + "from": "system", + "setting_id": "4up2FChqWIEn6vYl", "instantiation": "true", "layer_height": "0.3", "initial_layer_print_height": "0.3", diff --git a/resources/profiles/Vzbot.json b/resources/profiles/Vzbot.json index a64b4807e8..04e239ed45 100644 --- a/resources/profiles/Vzbot.json +++ b/resources/profiles/Vzbot.json @@ -1,6 +1,6 @@ { "name": "Vzbot", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "Vzbot configurations", "machine_model_list": [ diff --git a/resources/profiles/Vzbot/filament/Generic ABS @Vzbot.json b/resources/profiles/Vzbot/filament/Generic ABS @Vzbot.json index bc59bdfea7..0fe03d3148 100644 --- a/resources/profiles/Vzbot/filament/Generic ABS @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic ABS @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Vzbot", - "inherits": "fdm_filament_abs", "renamed_from": "Vzbot Generic ABS", + "inherits": "fdm_filament_abs", "from": "system", "setting_id": "0gr3MwdhoGW44mbr", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Vzbot/filament/Generic ASA @Vzbot.json b/resources/profiles/Vzbot/filament/Generic ASA @Vzbot.json index 9495f5cb1e..4341eb7b9a 100644 --- a/resources/profiles/Vzbot/filament/Generic ASA @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic ASA @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ASA @Vzbot", - "inherits": "fdm_filament_asa", "renamed_from": "Vzbot Generic ASA", + "inherits": "fdm_filament_asa", "from": "system", "setting_id": "0MutZpaR9XVzUGGS", "filament_id": "OFLPAxz3", diff --git a/resources/profiles/Vzbot/filament/Generic PA @Vzbot.json b/resources/profiles/Vzbot/filament/Generic PA @Vzbot.json index a5e39c829c..db0e5fcca0 100644 --- a/resources/profiles/Vzbot/filament/Generic PA @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic PA @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Vzbot", - "inherits": "fdm_filament_pa", "renamed_from": "Vzbot Generic PA", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "fwiU6RaIAOV38A9B", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Vzbot/filament/Generic PA-CF @Vzbot.json b/resources/profiles/Vzbot/filament/Generic PA-CF @Vzbot.json index 30a13910e0..3dba44eea0 100644 --- a/resources/profiles/Vzbot/filament/Generic PA-CF @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic PA-CF @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA-CF @Vzbot", - "inherits": "fdm_filament_pa", "renamed_from": "Vzbot Generic PA-CF", + "inherits": "fdm_filament_pa", "from": "system", "setting_id": "q8DtJmdJUN3KFV3E", "filament_id": "OFQLcbps", diff --git a/resources/profiles/Vzbot/filament/Generic PC @Vzbot.json b/resources/profiles/Vzbot/filament/Generic PC @Vzbot.json index e2fecd6301..bcb2a6e11e 100644 --- a/resources/profiles/Vzbot/filament/Generic PC @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic PC @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PC @Vzbot", - "inherits": "fdm_filament_pc", "renamed_from": "Vzbot Generic PC", + "inherits": "fdm_filament_pc", "from": "system", "setting_id": "crcoB7BvhVnnHNaF", "filament_id": "OFLakOUI", diff --git a/resources/profiles/Vzbot/filament/Generic PETG @Vzbot.json b/resources/profiles/Vzbot/filament/Generic PETG @Vzbot.json index bfb1f5af81..753b2816a3 100644 --- a/resources/profiles/Vzbot/filament/Generic PETG @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic PETG @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Vzbot", - "inherits": "fdm_filament_pet", "renamed_from": "Vzbot Generic PETG", + "inherits": "fdm_filament_pet", "from": "system", "setting_id": "NInr0jEJnziZ1poM", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Vzbot/filament/Generic PLA @Vzbot.json b/resources/profiles/Vzbot/filament/Generic PLA @Vzbot.json index ee77c2fd61..1953b3353f 100644 --- a/resources/profiles/Vzbot/filament/Generic PLA @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic PLA @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Vzbot", - "inherits": "fdm_filament_pla", "renamed_from": "Vzbot Generic PLA", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "Skn1ODpcSXd2NFcH", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Vzbot/filament/Generic PLA-CF @Vzbot.json b/resources/profiles/Vzbot/filament/Generic PLA-CF @Vzbot.json index 2fd8b03ee5..5b62fb3c69 100644 --- a/resources/profiles/Vzbot/filament/Generic PLA-CF @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic PLA-CF @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA-CF @Vzbot", - "inherits": "fdm_filament_pla", "renamed_from": "Vzbot Generic PLA-CF", + "inherits": "fdm_filament_pla", "from": "system", "setting_id": "FETpZHhHj60hztGS", "filament_id": "OFWbdGsC", diff --git a/resources/profiles/Vzbot/filament/Generic PVA @Vzbot.json b/resources/profiles/Vzbot/filament/Generic PVA @Vzbot.json index f8b6793e74..fb81783434 100644 --- a/resources/profiles/Vzbot/filament/Generic PVA @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic PVA @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PVA @Vzbot", - "inherits": "fdm_filament_pva", "renamed_from": "Vzbot Generic PVA", + "inherits": "fdm_filament_pva", "from": "system", "setting_id": "3xgrPw1nCEUaKQwQ", "filament_id": "OFDvXujf", diff --git a/resources/profiles/Vzbot/filament/Generic TPU @Vzbot.json b/resources/profiles/Vzbot/filament/Generic TPU @Vzbot.json index 6ba3a3e9e4..5b705e9be6 100644 --- a/resources/profiles/Vzbot/filament/Generic TPU @Vzbot.json +++ b/resources/profiles/Vzbot/filament/Generic TPU @Vzbot.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic TPU @Vzbot", - "inherits": "fdm_filament_tpu", "renamed_from": "Vzbot Generic TPU", + "inherits": "fdm_filament_tpu", "from": "system", "setting_id": "eC3Pgdpbwi2amDbk", "filament_id": "OFgbpcy9", diff --git a/resources/profiles/WEMAKE3D.json b/resources/profiles/WEMAKE3D.json index feeeba132b..197bf820dd 100644 --- a/resources/profiles/WEMAKE3D.json +++ b/resources/profiles/WEMAKE3D.json @@ -1,6 +1,6 @@ { "name": "WEMAKE3D", - "version": "02.04.00.02", + "version": "02.04.00.03", "force_update": "0", "description": "WEMAKE3D configurations", "machine_model_list": [ diff --git a/resources/profiles/WEMAKE3D/machine/WEMAKE3D PhoenixProV1 0.2mm nozzle.json b/resources/profiles/WEMAKE3D/machine/WEMAKE3D PhoenixProV1 0.2mm nozzle.json index c83afd8d4b..8943d7551c 100644 --- a/resources/profiles/WEMAKE3D/machine/WEMAKE3D PhoenixProV1 0.2mm nozzle.json +++ b/resources/profiles/WEMAKE3D/machine/WEMAKE3D PhoenixProV1 0.2mm nozzle.json @@ -3,8 +3,8 @@ "name": "WEMAKE3D PhoenixProV1 0.2mm nozzle", "inherits": "fdm_machine_phoenixprov1_common", "from": "system", - "instantiation": "true", "setting_id": "XHK731uBkstR3hRp", + "instantiation": "true", "printer_model": "WEMAKE3D PhoenixProV1", "nozzle_diameter": [ "0.2" diff --git a/resources/profiles/Wanhao France.json b/resources/profiles/Wanhao France.json index 9087899761..6392daea8d 100644 --- a/resources/profiles/Wanhao France.json +++ b/resources/profiles/Wanhao France.json @@ -1,6 +1,6 @@ { "name": "Wanhao France", - "version": "02.04.00.05", + "version": "02.04.00.06", "force_update": "0", "description": "Wanhao France D12 configurations", "machine_model_list": [ diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO M2 DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 230 PRO M2 DIRECT 0.4 nozzle.json index 865bad7e88..bcac8171fb 100644 --- a/resources/profiles/Wanhao France/machine/D12 230 PRO M2 DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 230 PRO M2 DIRECT 0.4 nozzle.json @@ -45,12 +45,15 @@ "70" ], "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -58,36 +61,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle PoopTool.json b/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle PoopTool.json index 4f89e83c22..56e2bb4b37 100644 --- a/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle PoopTool.json +++ b/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle PoopTool.json @@ -44,12 +44,15 @@ "enable_filament_ramming": "0", "gcode_flavor": "marlin2", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -57,36 +60,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle.json index 6f3cdc3ee9..c29401182c 100644 --- a/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 230 PRO M2 MONO DUAL 0.4 nozzle.json @@ -44,12 +44,15 @@ "enable_filament_ramming": "0", "gcode_flavor": "marlin2", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -57,36 +60,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json index 366c7b8ad8..396ff66720 100644 --- a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD DIRECT 0.4 nozzle.json @@ -44,12 +44,15 @@ ], "gcode_flavor": "klipper", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -57,36 +60,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle PoopTool.json b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle PoopTool.json index 80934434bb..fe92961917 100644 --- a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle PoopTool.json +++ b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle PoopTool.json @@ -44,12 +44,15 @@ "enable_filament_ramming": "0", "gcode_flavor": "klipper", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -57,36 +60,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "400", "400" ], "machine_max_speed_y": [ + "400", "400" ], "machine_max_speed_z": [ + "12", "12" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.3", "0.3" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle.json index a5dd04837c..fcaa8861c3 100644 --- a/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 230 PRO SMARTPAD MONO DUAL 0.4 nozzle.json @@ -44,12 +44,15 @@ "enable_filament_ramming": "0", "gcode_flavor": "klipper", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -57,36 +60,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "400", "400" ], "machine_max_speed_y": [ + "400", "400" ], "machine_max_speed_z": [ + "12", "12" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.3", "0.3" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json index f7308b5838..6b630b8cca 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 DIRECT 0.4 nozzle.json @@ -45,12 +45,15 @@ "70" ], "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -58,36 +61,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL 0.4 nozzle.json index e431c6ee24..fa70748531 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL 0.4 nozzle.json @@ -45,12 +45,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -58,36 +61,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json index fe00d9421b..c53452a713 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json @@ -46,12 +46,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -59,36 +62,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json index 81e3bfe34b..c16167cf3d 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD DIRECT 0.4 nozzle.json @@ -45,12 +45,15 @@ "70" ], "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -58,36 +61,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL 0.4 nozzle.json index fb189c1c70..32f8fdd6b6 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL 0.4 nozzle.json @@ -46,12 +46,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -59,36 +62,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json index 694ea29dc1..d73cf4dc6c 100644 --- a/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 300 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json @@ -46,12 +46,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -59,36 +62,47 @@ "500" ], "machine_max_acceleration_x": [ + "1200", "1200" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json index 916c24cef6..2a201bcdce 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 DIRECT 0.4 nozzle.json @@ -45,12 +45,15 @@ "70" ], "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -58,36 +61,47 @@ "500" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "800", "800" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL 0.4 nozzle.json index f168fa5fe5..df4f560839 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL 0.4 nozzle.json @@ -45,12 +45,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -58,36 +61,47 @@ "500" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "800", "800" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json index 6b0c3af76c..04454aa072 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO M2 MONO DUAL PoopTool 0.4 nozzle.json @@ -46,12 +46,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -59,36 +62,47 @@ "500" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "800", "800" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json index d79e811b91..3cded186e9 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD DIRECT 0.4 nozzle.json @@ -46,12 +46,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -59,36 +62,47 @@ "500" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "800", "800" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL 0.4 nozzle.json index 931c88e897..30fae3ceae 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL 0.4 nozzle.json @@ -46,12 +46,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -59,36 +62,47 @@ "500" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "800", "800" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json index 6f6bea0067..8a3489ecea 100644 --- a/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json +++ b/resources/profiles/Wanhao France/machine/D12 500 PRO SMARTPAD MONO DUAL PoopTool 0.4 nozzle.json @@ -46,12 +46,15 @@ ], "enable_filament_ramming": "0", "machine_max_acceleration_e": [ + "6000", "6000" ], "machine_max_acceleration_extruding": [ + "10000", "10000" ], "machine_max_acceleration_retracting": [ + "5000", "5000" ], "machine_max_acceleration_travel": [ @@ -59,36 +62,47 @@ "500" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "800", "800" ], "machine_max_acceleration_z": [ + "500", "500" ], "machine_max_speed_e": [ + "50", "50" ], "machine_max_speed_x": [ + "200", "200" ], "machine_max_speed_y": [ + "200", "200" ], "machine_max_speed_z": [ + "15", "15" ], "machine_max_jerk_e": [ + "2.5", "2.5" ], "machine_max_jerk_x": [ + "14", "14" ], "machine_max_jerk_y": [ + "14", "14" ], "machine_max_jerk_z": [ + "0.2", "0.2" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao France/machine/fdm_machine_common.json b/resources/profiles/Wanhao France/machine/fdm_machine_common.json index e72b821fa1..dc3764c3ef 100644 --- a/resources/profiles/Wanhao France/machine/fdm_machine_common.json +++ b/resources/profiles/Wanhao France/machine/fdm_machine_common.json @@ -112,7 +112,7 @@ "1" ], "support_multi_bed_types": "1", - "template_custom_gcode": ";;;;;;;;;;;;;;;;;;;;;;;;CUSTOM G-CODE;;;;;;;;;;;;;;;;;;;;;;;;\n{if curr_bed_type==\"Textured PEI Plate\"}\n SET_GCODE_OFFSET Z=-0.00\n{else}\nSET_GCODE_OFFSET Z=0.0\n{endif}\n{if curr_bed_type==\"Cool Plate\"}\n\n;available bed types are:\n;\"Cool Plate\"\n;\"Engineering Plate\"\n;\"High Temp Plate\"\n;\"Textured PEI Plate\"\n;;;;;;;;;;;;;;;;;;;;;;;;;CUSTOM G-CODE;;;;;;;;;;;;;;;;;;;;;;;;\n", + "template_custom_gcode": ";;;;;;;;;;;;;;;;;;;;;;;;CUSTOM G-CODE;;;;;;;;;;;;;;;;;;;;;;;;\n{if curr_bed_type==\"Textured PEI Plate\"}\n SET_GCODE_OFFSET Z=-0.00\n{else}\nSET_GCODE_OFFSET Z=0.0\n{endif}\n\n;available bed types are:\n;\"Cool Plate\"\n;\"Engineering Plate\"\n;\"High Temp Plate\"\n;\"Textured PEI Plate\"\n;;;;;;;;;;;;;;;;;;;;;;;;;CUSTOM G-CODE;;;;;;;;;;;;;;;;;;;;;;;;\n", "z_hop_types": "Normal Lift", "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n", "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle", diff --git a/resources/profiles/Wanhao.json b/resources/profiles/Wanhao.json index 81afe3eff5..8595e67dce 100644 --- a/resources/profiles/Wanhao.json +++ b/resources/profiles/Wanhao.json @@ -1,12 +1,60 @@ { "name": "Wanhao", - "version": "02.04.00.02", + "version": "02.04.00.04", "force_update": "0", "description": "Wanhao configurations", "machine_model_list": [ { "name": "Wanhao D12-300", "sub_path": "machine/Wanhao D12-300.json" + }, + { + "name": "Wanhao D9-300 MK1", + "sub_path": "machine/Wanhao D9-300 MK1.json" + }, + { + "name": "Wanhao D9-300 MK1 BLTouch kit", + "sub_path": "machine/Wanhao D9-300 MK1 BLTouch kit.json" + }, + { + "name": "Wanhao D9-300 MK2", + "sub_path": "machine/Wanhao D9-300 MK2.json" + }, + { + "name": "Wanhao D9-300 MK3", + "sub_path": "machine/Wanhao D9-300 MK3.json" + }, + { + "name": "Wanhao D9-400 MK1", + "sub_path": "machine/Wanhao D9-400 MK1.json" + }, + { + "name": "Wanhao D9-400 MK1 BLTouch kit", + "sub_path": "machine/Wanhao D9-400 MK1 BLTouch kit.json" + }, + { + "name": "Wanhao D9-400 MK2", + "sub_path": "machine/Wanhao D9-400 MK2.json" + }, + { + "name": "Wanhao D9-400 MK3", + "sub_path": "machine/Wanhao D9-400 MK3.json" + }, + { + "name": "Wanhao D9-500 MK1", + "sub_path": "machine/Wanhao D9-500 MK1.json" + }, + { + "name": "Wanhao D9-500 MK1 BLTouch kit", + "sub_path": "machine/Wanhao D9-500 MK1 BLTouch kit.json" + }, + { + "name": "Wanhao D9-500 MK2", + "sub_path": "machine/Wanhao D9-500 MK2.json" + }, + { + "name": "Wanhao D9-500 MK3", + "sub_path": "machine/Wanhao D9-500 MK3.json" } ], "process_list": [ @@ -33,6 +81,38 @@ { "name": "0.24mm Draft @Wanhao D12-300", "sub_path": "process/0.24mm Draft @Wanhao D12-300.json" + }, + { + "name": "fdm_process_wanhao_d9_common", + "sub_path": "process/fdm_process_wanhao_d9_common.json" + }, + { + "name": "0.12mm Fine @Wanhao D9", + "sub_path": "process/0.12mm Fine @Wanhao D9.json" + }, + { + "name": "0.20mm Standard @Wanhao D9", + "sub_path": "process/0.20mm Standard @Wanhao D9.json" + }, + { + "name": "0.28mm Draft @Wanhao D9", + "sub_path": "process/0.28mm Draft @Wanhao D9.json" + }, + { + "name": "fdm_process_wanhao_d9_mk1_common", + "sub_path": "process/fdm_process_wanhao_d9_mk1_common.json" + }, + { + "name": "0.12mm Fine @Wanhao D9 MK1", + "sub_path": "process/0.12mm Fine @Wanhao D9 MK1.json" + }, + { + "name": "0.20mm Standard @Wanhao D9 MK1", + "sub_path": "process/0.20mm Standard @Wanhao D9 MK1.json" + }, + { + "name": "0.28mm Draft @Wanhao D9 MK1", + "sub_path": "process/0.28mm Draft @Wanhao D9 MK1.json" } ], "filament_list": [], @@ -48,6 +128,62 @@ { "name": "Wanhao D12-300 0.4 nozzle", "sub_path": "machine/Wanhao D12-300 0.4 nozzle.json" + }, + { + "name": "fdm_wanhao_d9_common", + "sub_path": "machine/fdm_wanhao_d9_common.json" + }, + { + "name": "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle", + "sub_path": "machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-300 MK2 0.4 nozzle", + "sub_path": "machine/Wanhao D9-300 MK2 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-300 MK3 0.4 nozzle", + "sub_path": "machine/Wanhao D9-300 MK3 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle", + "sub_path": "machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-400 MK2 0.4 nozzle", + "sub_path": "machine/Wanhao D9-400 MK2 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-400 MK3 0.4 nozzle", + "sub_path": "machine/Wanhao D9-400 MK3 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle", + "sub_path": "machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-500 MK2 0.4 nozzle", + "sub_path": "machine/Wanhao D9-500 MK2 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-500 MK3 0.4 nozzle", + "sub_path": "machine/Wanhao D9-500 MK3 0.4 nozzle.json" + }, + { + "name": "fdm_wanhao_d9_mk1_common", + "sub_path": "machine/fdm_wanhao_d9_mk1_common.json" + }, + { + "name": "Wanhao D9-300 MK1 0.4 nozzle", + "sub_path": "machine/Wanhao D9-300 MK1 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-400 MK1 0.4 nozzle", + "sub_path": "machine/Wanhao D9-400 MK1 0.4 nozzle.json" + }, + { + "name": "Wanhao D9-500 MK1 0.4 nozzle", + "sub_path": "machine/Wanhao D9-500 MK1 0.4 nozzle.json" } ] } diff --git a/resources/profiles/Wanhao/machine/Wanhao D12-300 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D12-300 0.4 nozzle.json index b96b3ce2d6..d79784d794 100644 --- a/resources/profiles/Wanhao/machine/Wanhao D12-300 0.4 nozzle.json +++ b/resources/profiles/Wanhao/machine/Wanhao D12-300 0.4 nozzle.json @@ -23,45 +23,59 @@ ], "gcode_flavor": "marlin", "machine_max_acceleration_e": [ + "10000", "10000" ], "machine_max_acceleration_extruding": [ + "1000", "1000" ], "machine_max_acceleration_retracting": [ + "1000", "1000" ], "machine_max_acceleration_x": [ + "1000", "1000" ], "machine_max_acceleration_y": [ + "1000", "1000" ], "machine_max_acceleration_z": [ + "100", "100" ], "machine_max_speed_e": [ + "60", "60" ], "machine_max_speed_x": [ + "500", "500" ], "machine_max_speed_y": [ + "500", "500" ], "machine_max_speed_z": [ + "10", "10" ], "machine_max_jerk_e": [ + "5", "5" ], "machine_max_jerk_x": [ + "10", "10" ], "machine_max_jerk_y": [ + "10", "10" ], "machine_max_jerk_z": [ + "0.3", "0.3" ], "max_layer_height": [ diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 0.4 nozzle.json new file mode 100644 index 0000000000..331a26e5ed --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-300 MK1 0.4 nozzle", + "inherits": "fdm_wanhao_d9_mk1_common", + "from": "system", + "setting_id": "MXNRpMDaVXj2xUx0", + "instantiation": "true", + "printer_model": "Wanhao D9-300 MK1", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9 MK1" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json new file mode 100644 index 0000000000..249c8f8d19 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "rq6cPs92KgrUyZrn", + "instantiation": "true", + "printer_model": "Wanhao D9-300 MK1 BLTouch kit", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit.json new file mode 100644 index 0000000000..57a4eddbfa --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1 BLTouch kit.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-300 MK1 BLTouch kit", + "model_id": "Wanhao-D9-300-MK1u2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1.json new file mode 100644 index 0000000000..288a444644 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK1.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-300 MK1", + "model_id": "Wanhao-D9-300-MK1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK2 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK2 0.4 nozzle.json new file mode 100644 index 0000000000..5cc17c7aa2 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK2 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-300 MK2 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "w3Cin9es1Jfx0dmR", + "instantiation": "true", + "printer_model": "Wanhao D9-300 MK2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK2.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK2.json new file mode 100644 index 0000000000..4c9bcb2412 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK2.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-300 MK2", + "model_id": "Wanhao-D9-300-MK2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK3 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK3 0.4 nozzle.json new file mode 100644 index 0000000000..19534f409e --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK3 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-300 MK3 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "acFQWZqlt4QSgBPv", + "instantiation": "true", + "printer_model": "Wanhao D9-300 MK3", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x300", + "0x300" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-300 MK3.json b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK3.json new file mode 100644 index 0000000000..07b31cf83f --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-300 MK3.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-300 MK3", + "model_id": "Wanhao-D9-300-MK3", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 0.4 nozzle.json new file mode 100644 index 0000000000..e08ee55eba --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-400 MK1 0.4 nozzle", + "inherits": "fdm_wanhao_d9_mk1_common", + "from": "system", + "setting_id": "DGSNE3AbmlBBG5PY", + "instantiation": "true", + "printer_model": "Wanhao D9-400 MK1", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9 MK1" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json new file mode 100644 index 0000000000..0ce2980a14 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "WcKY7v24ewtzPfnU", + "instantiation": "true", + "printer_model": "Wanhao D9-400 MK1 BLTouch kit", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit.json new file mode 100644 index 0000000000..bb68bd3cf9 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1 BLTouch kit.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-400 MK1 BLTouch kit", + "model_id": "Wanhao-D9-400-MK1u2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1.json new file mode 100644 index 0000000000..f730632548 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK1.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-400 MK1", + "model_id": "Wanhao-D9-400-MK1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK2 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK2 0.4 nozzle.json new file mode 100644 index 0000000000..91976f712b --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK2 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-400 MK2 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "jn1FEJFeN7S2gEbD", + "instantiation": "true", + "printer_model": "Wanhao D9-400 MK2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK2.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK2.json new file mode 100644 index 0000000000..2785f480e4 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK2.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-400 MK2", + "model_id": "Wanhao-D9-400-MK2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK3 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK3 0.4 nozzle.json new file mode 100644 index 0000000000..c7b44c9e7c --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK3 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-400 MK3 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "2kFyH1E3tqMWtDmG", + "instantiation": "true", + "printer_model": "Wanhao D9-400 MK3", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "400x0", + "400x400", + "0x400" + ], + "printable_height": "400", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-400 MK3.json b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK3.json new file mode 100644 index 0000000000..2e0b5143a1 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-400 MK3.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-400 MK3", + "model_id": "Wanhao-D9-400-MK3", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 0.4 nozzle.json new file mode 100644 index 0000000000..0f238c7d5c --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-500 MK1 0.4 nozzle", + "inherits": "fdm_wanhao_d9_mk1_common", + "from": "system", + "setting_id": "nj0TfnDKHb4wFX1R", + "instantiation": "true", + "printer_model": "Wanhao D9-500 MK1", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "printable_height": "500", + "default_print_profile": "0.20mm Standard @Wanhao D9 MK1" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json new file mode 100644 index 0000000000..25ce3bc9f6 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "Hmrnlh6pJzdO2dIJ", + "instantiation": "true", + "printer_model": "Wanhao D9-500 MK1 BLTouch kit", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "printable_height": "500", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit.json new file mode 100644 index 0000000000..4b6eea98ca --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1 BLTouch kit.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-500 MK1 BLTouch kit", + "model_id": "Wanhao-D9-500-MK1u2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1.json new file mode 100644 index 0000000000..87a99fd65f --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK1.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-500 MK1", + "model_id": "Wanhao-D9-500-MK1", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK2 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK2 0.4 nozzle.json new file mode 100644 index 0000000000..cabfea9cad --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK2 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-500 MK2 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "g2GSmhWJLFDwqzFI", + "instantiation": "true", + "printer_model": "Wanhao D9-500 MK2", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "printable_height": "500", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK2.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK2.json new file mode 100644 index 0000000000..0e8f9c1603 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK2.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-500 MK2", + "model_id": "Wanhao-D9-500-MK2", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK3 0.4 nozzle.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK3 0.4 nozzle.json new file mode 100644 index 0000000000..434a1cb830 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK3 0.4 nozzle.json @@ -0,0 +1,20 @@ +{ + "type": "machine", + "name": "Wanhao D9-500 MK3 0.4 nozzle", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "setting_id": "F7l90Rgr8Ni0sQva", + "instantiation": "true", + "printer_model": "Wanhao D9-500 MK3", + "nozzle_diameter": [ + "0.4" + ], + "printable_area": [ + "0x0", + "500x0", + "500x500", + "0x500" + ], + "printable_height": "500", + "default_print_profile": "0.20mm Standard @Wanhao D9" +} diff --git a/resources/profiles/Wanhao/machine/Wanhao D9-500 MK3.json b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK3.json new file mode 100644 index 0000000000..91dc6cb5a5 --- /dev/null +++ b/resources/profiles/Wanhao/machine/Wanhao D9-500 MK3.json @@ -0,0 +1,9 @@ +{ + "type": "machine_model", + "name": "Wanhao D9-500 MK3", + "model_id": "Wanhao-D9-500-MK3", + "nozzle_diameter": "0.4", + "machine_tech": "FFF", + "family": "Wanhao", + "default_materials": "Generic PLA @System;Generic PETG @System;Generic ABS @System" +} diff --git a/resources/profiles/Wanhao/machine/fdm_wanhao_d9_common.json b/resources/profiles/Wanhao/machine/fdm_wanhao_d9_common.json new file mode 100644 index 0000000000..563e50b943 --- /dev/null +++ b/resources/profiles/Wanhao/machine/fdm_wanhao_d9_common.json @@ -0,0 +1,108 @@ +{ + "type": "machine", + "name": "fdm_wanhao_d9_common", + "inherits": "fdm_wanhao_common", + "from": "system", + "instantiation": "false", + "gcode_flavor": "marlin2", + "use_relative_e_distances": "1", + "emit_machine_limits_to_gcode": "0", + "nozzle_diameter": [ + "0.4" + ], + "printer_variant": "0.4", + "max_layer_height": [ + "0.32" + ], + "min_layer_height": [ + "0.08" + ], + "machine_max_speed_x": [ + "300", + "300" + ], + "machine_max_speed_y": [ + "300", + "300" + ], + "machine_max_speed_z": [ + "5", + "5" + ], + "machine_max_speed_e": [ + "25", + "25" + ], + "machine_max_acceleration_x": [ + "3000", + "3000" + ], + "machine_max_acceleration_y": [ + "3000", + "3000" + ], + "machine_max_acceleration_z": [ + "100", + "100" + ], + "machine_max_acceleration_e": [ + "3000", + "3000" + ], + "machine_max_acceleration_extruding": [ + "1000", + "1000" + ], + "machine_max_acceleration_travel": [ + "1000", + "1000" + ], + "machine_max_acceleration_retracting": [ + "800", + "800" + ], + "machine_max_jerk_x": [ + "10", + "10" + ], + "machine_max_jerk_y": [ + "10", + "10" + ], + "machine_max_jerk_z": [ + "0.4", + "0.4" + ], + "machine_max_jerk_e": [ + "1", + "1" + ], + "retraction_length": [ + "2.0" + ], + "retraction_speed": [ + "25" + ], + "deretraction_speed": [ + "25" + ], + "retraction_minimum_travel": [ + "1" + ], + "z_hop": [ + "0" + ], + "wipe": [ + "0" + ], + "retract_when_changing_layer": [ + "1" + ], + "machine_start_gcode": "; Wanhao Duplicator 9 start G-code, for the Marlin 2.1 firmwares at github.com/Le-Syl21/WANHAO-Duplicator-9\nG21 ; millimetres\nG90 ; absolute coordinates\nM83 ; relative extrusion\nM140 S[bed_temperature_initial_layer_single] ; heat the bed\nM104 S150 ; warm the nozzle without letting it ooze\nG91 ; a print stopped by hand can leave the nozzle down on the bed\nG1 Z10 F300 ; so raise it before homing: a BLTouch needs 10 mm to deploy\nG90\nM280 P0 S160 ; BLTouch: clear an alarm and stow the pin\nG28 ; home all axes (this turns bed levelling off)\nM420 S1 ; turn the bed mesh saved from the screen back on\nG1 Z10 F300\nM104 S[nozzle_temperature_initial_layer] ; start the nozzle now, the bed is still heating\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed\nM109 S[nozzle_temperature_initial_layer] ; and confirm the nozzle\nG92 E0\nG1 X15 Y20 Z0.3 F3000 ; start of the priming line\nG1 Y140 E9.0 F1200 ; draw a line of filament\nG1 X15.5 F3000\nG1 Y20 E9.0 F1200 ; and back, next to it\nG92 E0\nG1 X22 F6000 ; wipe sideways to snap the string\nG1 Z2 F300 ; lift, so the line does not stick to the nozzle", + "machine_end_gcode": "; Wanhao Duplicator 9 end G-code\nM104 S0 ; nozzle heater off\nM140 S0 ; bed heater off\nM107 ; fan off\nG91 ; relative moves\nG1 E-2 F1500 ; release the pressure in the nozzle\nG1 Z10 F300 ; lift the nozzle\nG90 ; absolute moves\nG1 X5 Y{print_bed_max[1] - 10} F3000 ; bring the bed to the front\nM84 X Y E ; motors off, Z keeps its position", + "layer_change_gcode": "G92 E0", + "machine_pause_gcode": "M600", + "default_filament_profile": [ + "Generic PLA @System" + ] +} diff --git a/resources/profiles/Wanhao/machine/fdm_wanhao_d9_mk1_common.json b/resources/profiles/Wanhao/machine/fdm_wanhao_d9_mk1_common.json new file mode 100644 index 0000000000..f6de484370 --- /dev/null +++ b/resources/profiles/Wanhao/machine/fdm_wanhao_d9_mk1_common.json @@ -0,0 +1,28 @@ +{ + "type": "machine", + "name": "fdm_wanhao_d9_mk1_common", + "inherits": "fdm_wanhao_d9_common", + "from": "system", + "instantiation": "false", + "machine_start_gcode": "; Wanhao Duplicator 9 start G-code, for the Marlin 2.1 firmwares at github.com/Le-Syl21/WANHAO-Duplicator-9\nG21 ; millimetres\nG90 ; absolute coordinates\nM83 ; relative extrusion\nM140 S[bed_temperature_initial_layer_single] ; heat the bed\nM104 S150 ; warm the nozzle without letting it ooze\nG91 ; a print stopped by hand can leave the nozzle down on the bed\nG1 Z10 F300 ; clear the bed before homing\nG90\nG28 ; home all axes (this turns bed levelling off)\nM420 S1 ; turn the bed mesh saved from the screen back on\nG1 Z10 F300\nM104 S[nozzle_temperature_initial_layer] ; start the nozzle now, the bed is still heating\nM190 S[bed_temperature_initial_layer_single] ; wait for the bed\nM109 S[nozzle_temperature_initial_layer] ; and confirm the nozzle\nG92 E0\nG1 X15 Y20 Z0.3 F3000 ; start of the priming line\nG1 Y140 E9.0 F1200 ; draw a line of filament\nG1 X15.5 F3000\nG1 Y20 E9.0 F1200 ; and back, next to it\nG92 E0\nG1 X22 F6000 ; wipe sideways to snap the string\nG1 Z2 F300 ; lift, so the line does not stick to the nozzle", + "machine_max_acceleration_x": [ + "500", + "500" + ], + "machine_max_acceleration_y": [ + "500", + "500" + ], + "machine_max_acceleration_e": [ + "500", + "500" + ], + "machine_max_acceleration_extruding": [ + "500", + "500" + ], + "machine_max_acceleration_travel": [ + "500", + "500" + ] +} diff --git a/resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9 MK1.json b/resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9 MK1.json new file mode 100644 index 0000000000..b5c5083042 --- /dev/null +++ b/resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9 MK1.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "name": "0.12mm Fine @Wanhao D9 MK1", + "inherits": "fdm_process_wanhao_d9_mk1_common", + "from": "system", + "setting_id": "EClNN5UDWbLACTuz", + "instantiation": "true", + "layer_height": "0.12", + "initial_layer_print_height": "0.14", + "top_shell_layers": "4", + "bottom_shell_layers": "4", + "compatible_printers": [ + "Wanhao D9-300 MK1 0.4 nozzle", + "Wanhao D9-400 MK1 0.4 nozzle", + "Wanhao D9-500 MK1 0.4 nozzle" + ] +} diff --git a/resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9.json b/resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9.json new file mode 100644 index 0000000000..5ea13a0f1e --- /dev/null +++ b/resources/profiles/Wanhao/process/0.12mm Fine @Wanhao D9.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.12mm Fine @Wanhao D9", + "inherits": "fdm_process_wanhao_d9_common", + "from": "system", + "setting_id": "0hvsKsPO55TlduZR", + "instantiation": "true", + "layer_height": "0.12", + "initial_layer_print_height": "0.14", + "top_shell_layers": "4", + "bottom_shell_layers": "4", + "compatible_printers": [ + "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-300 MK2 0.4 nozzle", + "Wanhao D9-400 MK2 0.4 nozzle", + "Wanhao D9-500 MK2 0.4 nozzle", + "Wanhao D9-300 MK3 0.4 nozzle", + "Wanhao D9-400 MK3 0.4 nozzle", + "Wanhao D9-500 MK3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9 MK1.json b/resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9 MK1.json new file mode 100644 index 0000000000..834dd8b158 --- /dev/null +++ b/resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9 MK1.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "name": "0.20mm Standard @Wanhao D9 MK1", + "inherits": "fdm_process_wanhao_d9_mk1_common", + "from": "system", + "setting_id": "CXNOj3tPeTUXx81B", + "instantiation": "true", + "layer_height": "0.20", + "initial_layer_print_height": "0.24", + "top_shell_layers": "3", + "bottom_shell_layers": "3", + "compatible_printers": [ + "Wanhao D9-300 MK1 0.4 nozzle", + "Wanhao D9-400 MK1 0.4 nozzle", + "Wanhao D9-500 MK1 0.4 nozzle" + ] +} diff --git a/resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9.json b/resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9.json new file mode 100644 index 0000000000..ee3fe49c29 --- /dev/null +++ b/resources/profiles/Wanhao/process/0.20mm Standard @Wanhao D9.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.20mm Standard @Wanhao D9", + "inherits": "fdm_process_wanhao_d9_common", + "from": "system", + "setting_id": "UVXxknNxJswqaURQ", + "instantiation": "true", + "layer_height": "0.20", + "initial_layer_print_height": "0.24", + "top_shell_layers": "3", + "bottom_shell_layers": "3", + "compatible_printers": [ + "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-300 MK2 0.4 nozzle", + "Wanhao D9-400 MK2 0.4 nozzle", + "Wanhao D9-500 MK2 0.4 nozzle", + "Wanhao D9-300 MK3 0.4 nozzle", + "Wanhao D9-400 MK3 0.4 nozzle", + "Wanhao D9-500 MK3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9 MK1.json b/resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9 MK1.json new file mode 100644 index 0000000000..e3ffe5895f --- /dev/null +++ b/resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9 MK1.json @@ -0,0 +1,17 @@ +{ + "type": "process", + "name": "0.28mm Draft @Wanhao D9 MK1", + "inherits": "fdm_process_wanhao_d9_mk1_common", + "from": "system", + "setting_id": "omfIWwVnQVVxPrtb", + "instantiation": "true", + "layer_height": "0.28", + "initial_layer_print_height": "0.34", + "top_shell_layers": "3", + "bottom_shell_layers": "3", + "compatible_printers": [ + "Wanhao D9-300 MK1 0.4 nozzle", + "Wanhao D9-400 MK1 0.4 nozzle", + "Wanhao D9-500 MK1 0.4 nozzle" + ] +} diff --git a/resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9.json b/resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9.json new file mode 100644 index 0000000000..d9fd9e21e9 --- /dev/null +++ b/resources/profiles/Wanhao/process/0.28mm Draft @Wanhao D9.json @@ -0,0 +1,23 @@ +{ + "type": "process", + "name": "0.28mm Draft @Wanhao D9", + "inherits": "fdm_process_wanhao_d9_common", + "from": "system", + "setting_id": "FEJqq1ylXWqaBPR6", + "instantiation": "true", + "layer_height": "0.28", + "initial_layer_print_height": "0.34", + "top_shell_layers": "3", + "bottom_shell_layers": "3", + "compatible_printers": [ + "Wanhao D9-300 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-400 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-500 MK1 BLTouch kit 0.4 nozzle", + "Wanhao D9-300 MK2 0.4 nozzle", + "Wanhao D9-400 MK2 0.4 nozzle", + "Wanhao D9-500 MK2 0.4 nozzle", + "Wanhao D9-300 MK3 0.4 nozzle", + "Wanhao D9-400 MK3 0.4 nozzle", + "Wanhao D9-500 MK3 0.4 nozzle" + ] +} diff --git a/resources/profiles/Wanhao/process/fdm_process_wanhao_d9_common.json b/resources/profiles/Wanhao/process/fdm_process_wanhao_d9_common.json new file mode 100644 index 0000000000..457ba4ae2d --- /dev/null +++ b/resources/profiles/Wanhao/process/fdm_process_wanhao_d9_common.json @@ -0,0 +1,38 @@ +{ + "type": "process", + "name": "fdm_process_wanhao_d9_common", + "inherits": "fdm_process_wanhao_common", + "from": "system", + "instantiation": "false", + "line_width": "0.4", + "initial_layer_line_width": "0.6", + "wall_loops": "2", + "infill_wall_overlap": "15%", + "sparse_infill_density": "15%", + "sparse_infill_pattern": "gyroid", + "outer_wall_speed": "25", + "inner_wall_speed": "40", + "sparse_infill_speed": "50", + "internal_solid_infill_speed": "50", + "top_surface_speed": "40", + "gap_infill_speed": "40", + "bridge_speed": "50", + "support_speed": "35", + "initial_layer_speed": "25", + "initial_layer_infill_speed": "25", + "travel_speed": "100", + "default_acceleration": "1000", + "outer_wall_acceleration": "1000", + "inner_wall_acceleration": "1000", + "top_surface_acceleration": "1000", + "sparse_infill_acceleration": "1000", + "initial_layer_acceleration": "1000", + "bridge_acceleration": "1000", + "travel_acceleration": "1000", + "default_jerk": "0", + "skirt_loops": "2", + "skirt_distance": "4", + "brim_type": "no_brim", + "enable_support": "0", + "enable_arc_fitting": "0" +} diff --git a/resources/profiles/Wanhao/process/fdm_process_wanhao_d9_mk1_common.json b/resources/profiles/Wanhao/process/fdm_process_wanhao_d9_mk1_common.json new file mode 100644 index 0000000000..3fb1c650db --- /dev/null +++ b/resources/profiles/Wanhao/process/fdm_process_wanhao_d9_mk1_common.json @@ -0,0 +1,15 @@ +{ + "type": "process", + "name": "fdm_process_wanhao_d9_mk1_common", + "inherits": "fdm_process_wanhao_d9_common", + "from": "system", + "instantiation": "false", + "default_acceleration": "500", + "outer_wall_acceleration": "500", + "inner_wall_acceleration": "500", + "top_surface_acceleration": "500", + "sparse_infill_acceleration": "500", + "initial_layer_acceleration": "500", + "bridge_acceleration": "500", + "travel_acceleration": "500" +} diff --git a/resources/profiles/WonderMaker.json b/resources/profiles/WonderMaker.json index 35a1b5c8fa..2a23096162 100755 --- a/resources/profiles/WonderMaker.json +++ b/resources/profiles/WonderMaker.json @@ -1,7 +1,7 @@ { "name": "WonderMaker", "url": "", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "WonderMaker configurations", "machine_model_list": [ @@ -432,12 +432,8 @@ "sub_path": "machine/WonderMaker ZR 0.4 nozzle.json" }, { - "name": "WonderMaker ZR Ultra 0.4 nozzle", - "sub_path": "machine/WonderMaker ZR Ultra 0.4 nozzle.json" - }, - { - "name": "WonderMaker ZR Ultra S 0.4 nozzle", - "sub_path": "machine/WonderMaker ZR Ultra S 0.4 nozzle.json" + "name": "fdm_ultra_common", + "sub_path": "machine/fdm_ultra_common.json" }, { "name": "WonderMaker ZR 0.2 nozzle", @@ -455,6 +451,10 @@ "name": "WonderMaker ZR Ultra 0.2 nozzle", "sub_path": "machine/WonderMaker ZR Ultra 0.2 nozzle.json" }, + { + "name": "WonderMaker ZR Ultra 0.4 nozzle", + "sub_path": "machine/WonderMaker ZR Ultra 0.4 nozzle.json" + }, { "name": "WonderMaker ZR Ultra 0.6 nozzle", "sub_path": "machine/WonderMaker ZR Ultra 0.6 nozzle.json" @@ -467,6 +467,10 @@ "name": "WonderMaker ZR Ultra S 0.2 nozzle", "sub_path": "machine/WonderMaker ZR Ultra S 0.2 nozzle.json" }, + { + "name": "WonderMaker ZR Ultra S 0.4 nozzle", + "sub_path": "machine/WonderMaker ZR Ultra S 0.4 nozzle.json" + }, { "name": "WonderMaker ZR Ultra S 0.6 nozzle", "sub_path": "machine/WonderMaker ZR Ultra S 0.6 nozzle.json" diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.2 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.2 nozzle.json old mode 100755 new mode 100644 index 927ab9d44b..e05b975115 --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.2 nozzle.json @@ -1,22 +1,23 @@ { "type": "machine", "name": "WonderMaker ZR Ultra 0.2 nozzle", - "inherits": "WonderMaker ZR Ultra 0.4 nozzle", + "inherits": "fdm_ultra_common", "from": "system", "setting_id": "AX42zNj8YsJ94ilv", "instantiation": "true", + "printer_model": "WonderMaker ZR Ultra", + "printer_variant": "0.2", + "default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle", + "default_bed_type": "4", + "max_layer_height": [ + "0.14" + ], "nozzle_diameter": [ "0.2", "0.2", "0.2", "0.2" ], - "printer_model": "WonderMaker ZR Ultra", - "printer_variant": "0.2", - "default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle", - "max_layer_height": [ - "0.14" - ], "min_layer_height": [ "0.04" ], diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.4 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.4 nozzle.json old mode 100755 new mode 100644 index 0a30108052..67e507516a --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.4 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.4 nozzle.json @@ -1,65 +1,17 @@ { "type": "machine", "name": "WonderMaker ZR Ultra 0.4 nozzle", - "inherits": "fdm_klipper_common", + "inherits": "fdm_ultra_common", "from": "system", "setting_id": "xJBdCljSZVDINXnP", "instantiation": "true", "printer_model": "WonderMaker ZR Ultra", "default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra", "default_bed_type": "4", - "default_filament_profile": [ - "WonderMaker PLA Basic" - ], - "single_extruder_multi_material": "0", "nozzle_diameter": [ "0.4", "0.4", "0.4", "0.4" - ], - "printable_area": [ - "0x0", - "300x0", - "300x270", - "0x270" - ], - "bed_exclude_area": [], - "printable_height": "290", - "extruder_clearance_radius": "134", - "bed_mesh_min": [ - "10", - "10" - ], - "bed_mesh_max": [ - "290", - "260" - ], - "bed_mesh_probe_distance": [ - "50", - "50" - ], - "support_air_filtration": "0", - "support_chamber_temp_control": "0", - "machine_tool_change_time": "10", - "machine_load_filament_time": "0", - "machine_unload_filament_time": "0", - "retract_lift_below": [ - "279", - "279", - "279", - "279" - ], - "enable_long_retraction_when_cut": [ - "0", - "0", - "0", - "0" - ], - "long_retractions_when_cut": [ - "0", - "0", - "0", - "0" ] } diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.6 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.6 nozzle.json old mode 100755 new mode 100644 index fc851ff348..d98ab10954 --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.6 nozzle.json @@ -1,22 +1,23 @@ { "type": "machine", "name": "WonderMaker ZR Ultra 0.6 nozzle", - "inherits": "WonderMaker ZR Ultra 0.4 nozzle", + "inherits": "fdm_ultra_common", "from": "system", "setting_id": "6OWxZLFn3RD54QfX", "instantiation": "true", + "printer_model": "WonderMaker ZR Ultra", + "printer_variant": "0.6", + "default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle", + "default_bed_type": "4", + "max_layer_height": [ + "0.42" + ], "nozzle_diameter": [ "0.6", "0.6", "0.6", "0.6" ], - "printer_model": "WonderMaker ZR Ultra", - "printer_variant": "0.6", - "default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle", - "max_layer_height": [ - "0.42" - ], "min_layer_height": [ "0.12" ], diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.8 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.8 nozzle.json old mode 100755 new mode 100644 index eefaab3431..2b5929a862 --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra 0.8 nozzle.json @@ -1,22 +1,23 @@ { "type": "machine", "name": "WonderMaker ZR Ultra 0.8 nozzle", - "inherits": "WonderMaker ZR Ultra 0.4 nozzle", + "inherits": "fdm_ultra_common", "from": "system", "setting_id": "SY9snlsMkurhEYWP", "instantiation": "true", + "printer_model": "WonderMaker ZR Ultra", + "printer_variant": "0.8", + "default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle", + "default_bed_type": "4", + "max_layer_height": [ + "0.56" + ], "nozzle_diameter": [ "0.8", "0.8", "0.8", "0.8" ], - "printer_model": "WonderMaker ZR Ultra", - "printer_variant": "0.8", - "default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle", - "max_layer_height": [ - "0.56" - ], "min_layer_height": [ "0.16" ], diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.2 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.2 nozzle.json old mode 100755 new mode 100644 index 26ad5e21d7..5d67c1fe5e --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.2 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.2 nozzle.json @@ -1,29 +1,19 @@ { "type": "machine", "name": "WonderMaker ZR Ultra S 0.2 nozzle", - "inherits": "WonderMaker ZR Ultra S 0.4 nozzle", + "inherits": "WonderMaker ZR Ultra 0.2 nozzle", "from": "system", "setting_id": "ZNAx3f7tX3DatiK1", "instantiation": "true", + "printer_model": "WonderMaker ZR Ultra S", "nozzle_diameter": [ "0.2", "0.2", "0.2", "0.2" ], - "printer_model": "WonderMaker ZR Ultra S", - "printer_variant": "0.2", "default_print_profile": "0.10mm Standard @WonderMaker ZR Ultra 0.2 nozzle", - "max_layer_height": [ - "0.14" - ], - "min_layer_height": [ - "0.04" - ], - "retraction_length": [ - "0.4", - "0.4", - "0.4", - "0.4" - ] + "printer_variant": "0.2", + "support_air_filtration": "1", + "support_chamber_temp_control": "1" } diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.4 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.4 nozzle.json old mode 100755 new mode 100644 index df1dbbb9a8..3ae0673f79 --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.4 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.4 nozzle.json @@ -1,65 +1,18 @@ { "type": "machine", "name": "WonderMaker ZR Ultra S 0.4 nozzle", - "inherits": "fdm_klipper_common", + "inherits": "WonderMaker ZR Ultra 0.4 nozzle", "from": "system", "setting_id": "8xoZ6vYv9ws0J97u", "instantiation": "true", "printer_model": "WonderMaker ZR Ultra S", - "default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra", - "default_bed_type": "4", - "default_filament_profile": [ - "WonderMaker PLA Basic" - ], - "single_extruder_multi_material": "0", "nozzle_diameter": [ "0.4", "0.4", "0.4", "0.4" ], - "printable_area": [ - "0x0", - "300x0", - "300x270", - "0x270" - ], - "bed_exclude_area": [], - "printable_height": "290", - "extruder_clearance_radius": "134", - "bed_mesh_min": [ - "10", - "10" - ], - "bed_mesh_max": [ - "290", - "260" - ], - "bed_mesh_probe_distance": [ - "50", - "50" - ], + "default_print_profile": "0.20mm Standard @WonderMaker ZR Ultra", "support_air_filtration": "1", - "support_chamber_temp_control": "1", - "machine_tool_change_time": "10", - "machine_load_filament_time": "0", - "machine_unload_filament_time": "0", - "retract_lift_below": [ - "279", - "279", - "279", - "279" - ], - "enable_long_retraction_when_cut": [ - "0", - "0", - "0", - "0" - ], - "long_retractions_when_cut": [ - "0", - "0", - "0", - "0" - ] + "support_chamber_temp_control": "1" } diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.6 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.6 nozzle.json old mode 100755 new mode 100644 index 9f2bd6f069..c75e56de4e --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.6 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.6 nozzle.json @@ -1,32 +1,19 @@ { "type": "machine", "name": "WonderMaker ZR Ultra S 0.6 nozzle", - "inherits": "WonderMaker ZR Ultra S 0.4 nozzle", + "inherits": "WonderMaker ZR Ultra 0.6 nozzle", "from": "system", "setting_id": "xuJnOPTmSW1BMo6p", "instantiation": "true", "printer_model": "WonderMaker ZR Ultra S", - "default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle", - "printer_variant": "0.6", "nozzle_diameter": [ + "0.6", + "0.6", + "0.6", "0.6" ], - "max_layer_height": [ - "0.42" - ], - "min_layer_height": [ - "0.12" - ], - "retraction_length": [ - "1.4", - "1.4", - "1.4", - "1.4" - ], - "retraction_minimum_travel": [ - "3", - "3", - "3", - "3" - ] + "default_print_profile": "0.30mm Standard @WonderMaker ZR Ultra 0.6 nozzle", + "printer_variant": "0.6", + "support_air_filtration": "1", + "support_chamber_temp_control": "1" } diff --git a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.8 nozzle.json b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.8 nozzle.json old mode 100755 new mode 100644 index 2137855fe0..f18a3d3361 --- a/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.8 nozzle.json +++ b/resources/profiles/WonderMaker/machine/WonderMaker ZR Ultra S 0.8 nozzle.json @@ -1,32 +1,19 @@ { "type": "machine", "name": "WonderMaker ZR Ultra S 0.8 nozzle", - "inherits": "WonderMaker ZR Ultra S 0.4 nozzle", + "inherits": "WonderMaker ZR Ultra 0.8 nozzle", "from": "system", "setting_id": "0BPLKMspArilfkGT", "instantiation": "true", "printer_model": "WonderMaker ZR Ultra S", - "default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle", - "printer_variant": "0.8", "nozzle_diameter": [ + "0.8", + "0.8", + "0.8", "0.8" ], - "max_layer_height": [ - "0.56" - ], - "min_layer_height": [ - "0.16" - ], - "retract_length_toolchange": [ - "3", - "3", - "3", - "3" - ], - "retraction_length": [ - "3", - "3", - "3", - "3" - ] + "default_print_profile": "0.40mm Standard @WonderMaker ZR Ultra 0.8 nozzle", + "printer_variant": "0.8", + "support_air_filtration": "1", + "support_chamber_temp_control": "1" } diff --git a/resources/profiles/WonderMaker/machine/fdm_ultra_common.json b/resources/profiles/WonderMaker/machine/fdm_ultra_common.json new file mode 100644 index 0000000000..08c8f9683a --- /dev/null +++ b/resources/profiles/WonderMaker/machine/fdm_ultra_common.json @@ -0,0 +1,64 @@ +{ + "type": "machine", + "name": "fdm_ultra_common", + "inherits": "fdm_klipper_common", + "from": "system", + "instantiation": "false", + "default_bed_type": "4", + "default_filament_profile": [ + "WonderMaker PLA Basic" + ], + "single_extruder_multi_material": "0", + "enable_filament_mapping": "1", + "filament_swap_gcode": "M117 Swap filament for tool {next_extruder}\nPAUSE", + "nozzle_diameter": [ + "0.4", + "0.4", + "0.4", + "0.4" + ], + "printable_area": [ + "0x0", + "300x0", + "300x270", + "0x270" + ], + "bed_exclude_area": [], + "printable_height": "290", + "extruder_clearance_radius": "134", + "bed_mesh_min": [ + "10", + "10" + ], + "bed_mesh_max": [ + "290", + "260" + ], + "bed_mesh_probe_distance": [ + "50", + "50" + ], + "support_air_filtration": "0", + "support_chamber_temp_control": "0", + "machine_tool_change_time": "10", + "machine_load_filament_time": "0", + "machine_unload_filament_time": "0", + "retract_lift_below": [ + "279", + "279", + "279", + "279" + ], + "enable_long_retraction_when_cut": [ + "0", + "0", + "0", + "0" + ], + "long_retractions_when_cut": [ + "0", + "0", + "0", + "0" + ] +} diff --git a/resources/profiles/Z-Bolt.json b/resources/profiles/Z-Bolt.json index 7c16785c62..b441ab9a72 100644 --- a/resources/profiles/Z-Bolt.json +++ b/resources/profiles/Z-Bolt.json @@ -1,7 +1,7 @@ { "name": "Z-Bolt", "url": "", - "version": "02.04.00.03", + "version": "02.04.00.04", "force_update": "0", "description": "Z-Bolt configurations", "machine_model_list": [ diff --git a/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.4 nozzle.json index 10b5421797..492f873ff9 100644 --- a/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Z-Bolt 0.4 nozzle", - "inherits": "Generic ABS @Z-Bolt Base", "renamed_from": "Z-Bolt ABS;Generic ABS @Z-Bolt;Z-Bolt ABS @0.4 nozzle", + "inherits": "Generic ABS @Z-Bolt Base", "from": "system", "setting_id": "p97bQCnVyGgwMn2y", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.6 nozzle.json index ea89fac80f..d207982007 100644 --- a/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Z-Bolt 0.6 nozzle", - "inherits": "Generic ABS @Z-Bolt Base", "renamed_from": "Z-Bolt ABS @0.6 nozzle", + "inherits": "Generic ABS @Z-Bolt Base", "from": "system", "setting_id": "BQdgCL8lvVW7I8Dw", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.8 nozzle.json index 48c8a20136..a27dc9d803 100644 --- a/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic ABS @Z-Bolt 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS @Z-Bolt 0.8 nozzle", - "inherits": "Generic ABS @Z-Bolt Base", "renamed_from": "Z-Bolt ABS @0.8 nozzle", + "inherits": "Generic ABS @Z-Bolt Base", "from": "system", "setting_id": "Xn2L7IBp26Bb6G2K", "filament_id": "OFY9muEs", diff --git a/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.4 nozzle.json index 7ee03a1904..b3b5e1990b 100644 --- a/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HT @Z-Bolt 0.4 nozzle", - "inherits": "Generic ABS HT @Z-Bolt Base", "renamed_from": "Z-Bolt ABS HT;Generic ABS HT @Z-Bolt;Z-Bolt ABS HT @0.4 nozzle", + "inherits": "Generic ABS HT @Z-Bolt Base", "from": "system", "setting_id": "TDGj84iuRAL9R1d4", "filament_id": "OFsP8PKH", diff --git a/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.6 nozzle.json index 626fbe9977..b36d374bfe 100644 --- a/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HT @Z-Bolt 0.6 nozzle", - "inherits": "Generic ABS HT @Z-Bolt Base", "renamed_from": "Z-Bolt ABS HT @0.6 nozzle", + "inherits": "Generic ABS HT @Z-Bolt Base", "from": "system", "setting_id": "2AKxm2VhVlL2vMM1", "filament_id": "OFsP8PKH", diff --git a/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.8 nozzle.json index feb932dcdb..8d3db4162a 100644 --- a/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic ABS HT @Z-Bolt 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic ABS HT @Z-Bolt 0.8 nozzle", - "inherits": "Generic ABS HT @Z-Bolt Base", "renamed_from": "Z-Bolt ABS HT @0.8 nozzle", + "inherits": "Generic ABS HT @Z-Bolt Base", "from": "system", "setting_id": "ztusMudd96Ns3Ip0", "filament_id": "OFsP8PKH", diff --git a/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.4 nozzle.json index c09de55efa..9071bde80a 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Z-Bolt 0.4 nozzle", - "inherits": "Generic PA @Z-Bolt Base", "renamed_from": "Z-Bolt PA;Generic PA @Z-Bolt;Z-Bolt PA @0.4 nozzle", + "inherits": "Generic PA @Z-Bolt Base", "from": "system", "setting_id": "zuvJBWxHOiPMyExQ", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.6 nozzle.json index d6886e6b1e..35c7e3352f 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Z-Bolt 0.6 nozzle", - "inherits": "Generic PA @Z-Bolt Base", "renamed_from": "Z-Bolt PA @0.6 nozzle", + "inherits": "Generic PA @Z-Bolt Base", "from": "system", "setting_id": "MB0n4BeDFEI25yTe", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.8 nozzle.json index 12a005431f..f50e82a0d9 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PA @Z-Bolt 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PA @Z-Bolt 0.8 nozzle", - "inherits": "Generic PA @Z-Bolt Base", "renamed_from": "Z-Bolt PA @0.8 nozzle", + "inherits": "Generic PA @Z-Bolt Base", "from": "system", "setting_id": "WZc4C1f6cPG8HZR3", "filament_id": "OFg8ndtj", diff --git a/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.4 nozzle.json index a28c4bc1c3..3ba2d3f680 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Z-Bolt 0.4 nozzle", - "inherits": "Generic PETG @Z-Bolt Base", "renamed_from": "Z-Bolt PETG;Generic PETG @Z-Bolt;Z-Bolt PETG @0.4 nozzle", + "inherits": "Generic PETG @Z-Bolt Base", "from": "system", "setting_id": "LWwbNXs8bf1iGELi", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.6 nozzle.json index 15aab3fe46..2eea58f874 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Z-Bolt 0.6 nozzle", - "inherits": "Generic PETG @Z-Bolt Base", "renamed_from": "Z-Bolt PETG @0.6 nozzle", + "inherits": "Generic PETG @Z-Bolt Base", "from": "system", "setting_id": "w4HVBbunzssG9j3s", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.8 nozzle.json index 4fe8b41490..5ff0c85771 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PETG @Z-Bolt 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PETG @Z-Bolt 0.8 nozzle", - "inherits": "Generic PETG @Z-Bolt Base", "renamed_from": "Z-Bolt PETG @0.8 nozzle", + "inherits": "Generic PETG @Z-Bolt Base", "from": "system", "setting_id": "TnLZ0vOVjIjng3u0", "filament_id": "OFYPdQJh", diff --git a/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.4 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.4 nozzle.json index 527888a93f..d5cc4c99aa 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.4 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Z-Bolt 0.4 nozzle", - "inherits": "Generic PLA @Z-Bolt Base", "renamed_from": "Z-Bolt PLA;Generic PLA @Z-Bolt;Z-Bolt PLA @0.4 nozzle", + "inherits": "Generic PLA @Z-Bolt Base", "from": "system", "setting_id": "0MfamDPH1L6sMRff", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.6 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.6 nozzle.json index af58bff7c5..e35e0b7a99 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.6 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Z-Bolt 0.6 nozzle", - "inherits": "Generic PLA @Z-Bolt Base", "renamed_from": "Z-Bolt PLA @0.6 nozzle", + "inherits": "Generic PLA @Z-Bolt Base", "from": "system", "setting_id": "tdq9Ye9GLpZXlak6", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.8 nozzle.json b/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.8 nozzle.json index dbe507507b..f86a0730bc 100644 --- a/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/filament/Generic PLA @Z-Bolt 0.8 nozzle.json @@ -1,8 +1,8 @@ { "type": "filament", "name": "Generic PLA @Z-Bolt 0.8 nozzle", - "inherits": "Generic PLA @Z-Bolt Base", "renamed_from": "Z-Bolt PLA @0.8 nozzle", + "inherits": "Generic PLA @Z-Bolt Base", "from": "system", "setting_id": "GKtc9mJusUZJD6kx", "filament_id": "OFDSrzZ8", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.4 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.4 nozzle.json index da04d25c6c..ee6b691a52 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.4 nozzle.json @@ -22,9 +22,11 @@ "0.08" ], "retraction_length": [ + "0.6", "0.6" ], "retraction_minimum_travel": [ + "1", "1" ], "change_filament_gcode": "G91\nG1 Z{z_hop[0]} F1000\nG90", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.6 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.6 nozzle.json index 309b3292d8..63748d753f 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.6 nozzle.json @@ -23,9 +23,11 @@ "0.12" ], "retraction_length": [ + "0.7", "0.7" ], "retraction_minimum_travel": [ + "2", "2" ], "thumbnails": "144x144/PNG,900x900/PNG", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.8 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.8 nozzle.json index 83f7fa507a..482a1ac26b 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S1000 Dual 0.8 nozzle.json @@ -23,12 +23,15 @@ "0.16" ], "retraction_length": [ + "0.8", "0.8" ], "retract_length_toolchange": [ + "3", "3" ], "retraction_minimum_travel": [ + "3", "3" ], "thumbnails": "144x144/PNG,900x900/PNG", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.4 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.4 nozzle.json index c461088460..b9b6d11f41 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.4 nozzle.json @@ -22,9 +22,11 @@ "0.08" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_minimum_travel": [ + "1", "1" ], "change_filament_gcode": "G91\nG1 Z{z_hop[0]} F1000\nG90", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.6 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.6 nozzle.json index 8e8cc70b43..8f99043bb0 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.6 nozzle.json @@ -23,9 +23,11 @@ "0.12" ], "retraction_length": [ + "1.4", "1.4" ], "retraction_minimum_travel": [ + "2", "2" ] } diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.8 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.8 nozzle.json index 506b51678b..b2c7cceef7 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S300 Dual 0.8 nozzle.json @@ -23,12 +23,15 @@ "0.16" ], "retraction_length": [ + "3", "3" ], "retract_length_toolchange": [ + "3", "3" ], "retraction_minimum_travel": [ + "3", "3" ] } diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.4 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.4 nozzle.json index d42c0e90f6..984bd4f36c 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.4 nozzle.json @@ -22,9 +22,11 @@ "0.08" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_minimum_travel": [ + "1", "1" ], "change_filament_gcode": "G91\nG1 Z{z_hop[0]} F1000\nG90", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.6 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.6 nozzle.json index 6664864f65..55bfcc4f2f 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.6 nozzle.json @@ -23,9 +23,11 @@ "0.12" ], "retraction_length": [ + "1.4", "1.4" ], "retraction_minimum_travel": [ + "2", "2" ] } diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.8 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.8 nozzle.json index 005c177fcf..2e57b6f3fa 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S400 Dual 0.8 nozzle.json @@ -23,12 +23,15 @@ "0.16" ], "retraction_length": [ + "3", "3" ], "retract_length_toolchange": [ + "3", "3" ], "retraction_minimum_travel": [ + "3", "3" ] } diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.4 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.4 nozzle.json index 5c2e417534..c53c5325a4 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.4 nozzle.json @@ -22,9 +22,11 @@ "0.08" ], "retraction_length": [ + "0.8", "0.8" ], "retraction_minimum_travel": [ + "1", "1" ], "change_filament_gcode": "G91\nG1 Z{z_hop[0]} F1000\nG90", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.6 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.6 nozzle.json index c15bf491f1..420c018e8c 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.6 nozzle.json @@ -23,9 +23,11 @@ "0.12" ], "retraction_length": [ + "1.4", "1.4" ], "retraction_minimum_travel": [ + "2", "2" ] } diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.8 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.8 nozzle.json index f51e1af0d8..5e1d2a0e99 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S600 Dual 0.8 nozzle.json @@ -23,12 +23,15 @@ "0.16" ], "retraction_length": [ + "3", "3" ], "retract_length_toolchange": [ + "3", "3" ], "retraction_minimum_travel": [ + "3", "3" ] } diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.4 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.4 nozzle.json index 1e204e9f5c..168b120746 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.4 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.4 nozzle.json @@ -30,62 +30,92 @@ "#018001" ], "machine_max_acceleration_e": [ + "1500", + "1500", "1500", "1500" ], "machine_max_acceleration_extruding": [ + "2500", + "2500", "2500", "2500" ], "machine_max_acceleration_retracting": [ + "1500", + "1500", "1500", "1500" ], "machine_max_acceleration_travel": [ + "9000", + "9000", "9000", "9000" ], "machine_max_acceleration_x": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_y": [ + "20000", + "20000", "20000", "20000" ], "machine_max_acceleration_z": [ + "12", + "12", "12", "12" ], "machine_max_speed_e": [ + "30", + "30", "30", "30" ], "machine_max_speed_x": [ + "500", + "200", "500", "200" ], "machine_max_speed_y": [ + "500", + "200", "500", "200" ], "machine_max_speed_z": [ + "20", + "20", "20", "20" ], "machine_max_jerk_e": [ + "2.5", + "2.5", "2.5", "2.5" ], "machine_max_jerk_x": [ + "9", + "9", "9", "9" ], "machine_max_jerk_y": [ + "9", + "9", "9", "9" ], "machine_max_jerk_z": [ + "3", + "3", "3", "3" ], @@ -107,27 +137,37 @@ "extruder_clearance_height_to_rod": "70", "extruder_clearance_height_to_lid": "200", "retraction_minimum_travel": [ + "1", "1" ], "retract_before_wipe": [ + "0%", "0%" ], "retraction_length": [ + "0.6", "0.6" ], "retract_length_toolchange": [ + "2", "2" ], "z_hop": [ + "1", "1" ], "retraction_speed": [ + "35", "35" ], "deretraction_speed": [ + "35", "35" ], - "nozzle_type": "hardened_steel", + "nozzle_type": [ + "hardened_steel", + "hardened_steel" + ], "machine_tool_change_time": "1", "support_chamber_temp_control": "1", "change_filament_gcode": "G91\nG1 Z{z_hop[0]} F1000\nG90", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.6 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.6 nozzle.json index 5c4fc79417..4180f78364 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.6 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.6 nozzle.json @@ -23,9 +23,11 @@ "0.12" ], "retraction_length": [ + "0.7", "0.7" ], "retraction_minimum_travel": [ + "2", "2" ], "thumbnails": "144x144/PNG,900x900/PNG", diff --git a/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.8 nozzle.json b/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.8 nozzle.json index 83fc5abc56..6b21d84d0f 100644 --- a/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.8 nozzle.json +++ b/resources/profiles/Z-Bolt/machine/Z-Bolt S800 Dual 0.8 nozzle.json @@ -23,12 +23,15 @@ "0.16" ], "retraction_length": [ + "0.8", "0.8" ], "retract_length_toolchange": [ + "3", "3" ], "retraction_minimum_travel": [ + "3", "3" ], "thumbnails": "144x144/PNG,900x900/PNG", diff --git a/resources/profiles/iQ.json b/resources/profiles/iQ.json index 1148b112f3..f6c8c1cab0 100644 --- a/resources/profiles/iQ.json +++ b/resources/profiles/iQ.json @@ -1,6 +1,6 @@ { "name": "innovatiQ", - "version": "02.04.00.04", + "version": "02.04.00.05", "force_update": "1", "description": "innovatiQ configuration", "machine_model_list": [ diff --git a/resources/profiles/iQ/machine/iQ TiQ2 0.25 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ2 0.25 nozzle.json index d0150d76e4..ef337f49eb 100644 --- a/resources/profiles/iQ/machine/iQ TiQ2 0.25 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ2 0.25 nozzle.json @@ -34,6 +34,8 @@ ], "machine_end_gcode": "G1 X-19 F3000 ; home X axis\nG1 Y1 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], diff --git a/resources/profiles/iQ/machine/iQ TiQ2 0.4 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ2 0.4 nozzle.json index 0fe6cccdd7..b02954271f 100644 --- a/resources/profiles/iQ/machine/iQ TiQ2 0.4 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ2 0.4 nozzle.json @@ -33,6 +33,8 @@ ], "machine_end_gcode": "G1 X-19 F3000 ; home X axis\nG1 Y1 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], diff --git a/resources/profiles/iQ/machine/iQ TiQ2 0.6 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ2 0.6 nozzle.json index efb586ab4b..de636867a2 100644 --- a/resources/profiles/iQ/machine/iQ TiQ2 0.6 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ2 0.6 nozzle.json @@ -34,6 +34,8 @@ ], "machine_end_gcode": "G1 X-19 F3000 ; home X axis\nG1 Y1 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], diff --git a/resources/profiles/iQ/machine/iQ TiQ2 0.8 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ2 0.8 nozzle.json index 3758f03508..a5b99e26ec 100644 --- a/resources/profiles/iQ/machine/iQ TiQ2 0.8 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ2 0.8 nozzle.json @@ -34,6 +34,8 @@ ], "machine_end_gcode": "G1 X-19 F3000 ; home X axis\nG1 Y1 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], diff --git a/resources/profiles/iQ/machine/iQ TiQ8 0.25 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ8 0.25 nozzle.json index 7409d9e6c6..3507d2e57a 100644 --- a/resources/profiles/iQ/machine/iQ TiQ8 0.25 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ8 0.25 nozzle.json @@ -33,6 +33,8 @@ ], "machine_end_gcode": "G1 X10 F3000 ; home X axis\nG1 Y10 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\n{if nozzle_temperature_initial_layer[current_extruder]>350}M140 S80{endif} ; Keep bed hot for easy part removal from PEI sheet\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], @@ -132,10 +134,14 @@ "Normal Lift" ], "machine_max_acceleration_x": [ + "1500", + "1500", "1500", "1500" ], "machine_max_acceleration_y": [ + "1500", + "1500", "1500", "1500" ], diff --git a/resources/profiles/iQ/machine/iQ TiQ8 0.4 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ8 0.4 nozzle.json index 484f9275bf..6f9129bd9c 100644 --- a/resources/profiles/iQ/machine/iQ TiQ8 0.4 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ8 0.4 nozzle.json @@ -33,6 +33,8 @@ ], "machine_end_gcode": "G1 X10 F3000 ; home X axis\nG1 Y10 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\n{if nozzle_temperature_initial_layer[current_extruder]>350}M140 S80{endif} ; Keep bed hot for easy part removal from PEI sheet\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], @@ -132,10 +134,14 @@ "Normal Lift" ], "machine_max_acceleration_x": [ + "1500", + "1500", "1500", "1500" ], "machine_max_acceleration_y": [ + "1500", + "1500", "1500", "1500" ], diff --git a/resources/profiles/iQ/machine/iQ TiQ8 0.6 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ8 0.6 nozzle.json index 6a12dcaaa0..7f8bdef3ff 100644 --- a/resources/profiles/iQ/machine/iQ TiQ8 0.6 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ8 0.6 nozzle.json @@ -33,6 +33,8 @@ ], "machine_end_gcode": "G1 X10 F3000 ; home X axis\nG1 Y10 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\n{if nozzle_temperature_initial_layer[current_extruder]>350}M140 S80{endif} ; Keep bed hot for easy part removal from PEI sheet\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], @@ -132,10 +134,14 @@ "Normal Lift" ], "machine_max_acceleration_x": [ + "1500", + "1500", "1500", "1500" ], "machine_max_acceleration_y": [ + "1500", + "1500", "1500", "1500" ], diff --git a/resources/profiles/iQ/machine/iQ TiQ8 0.8 nozzle.json b/resources/profiles/iQ/machine/iQ TiQ8 0.8 nozzle.json index 76fe177a16..ab1e17cd04 100644 --- a/resources/profiles/iQ/machine/iQ TiQ8 0.8 nozzle.json +++ b/resources/profiles/iQ/machine/iQ TiQ8 0.8 nozzle.json @@ -33,6 +33,8 @@ ], "machine_end_gcode": "G1 X10 F3000 ; home X axis\nG1 Y10 F3000 ; home Y axis\nM104 S0 T0 ; turn off extruder\nM104 S0 T1 ; turn off extruder\nM104 S0 T2 ; turn off extruder\nM140 S0 ; turn off bed\n{if nozzle_temperature_initial_layer[current_extruder]>350}M140 S80{endif} ; Keep bed hot for easy part removal from PEI sheet\nM106 S0 ; turn off fan\nM806 S0 ; turn of housing fan\nM84 ; disable motor\n", "machine_max_speed_z": [ + "15", + "12", "15", "12" ], @@ -132,10 +134,14 @@ "Normal Lift" ], "machine_max_acceleration_x": [ + "1500", + "1500", "1500", "1500" ], "machine_max_acceleration_y": [ + "1500", + "1500", "1500", "1500" ], diff --git a/resources/profiles/re3D.json b/resources/profiles/re3D.json index da34373d47..1a9e2ec591 100644 --- a/resources/profiles/re3D.json +++ b/resources/profiles/re3D.json @@ -1,7 +1,7 @@ { "name": "re3D", "url": "", - "version": "03.00.11", + "version": "03.00.12", "force_update": "0", "description": "re3D configurations", "machine_model_list": [ diff --git a/resources/profiles/re3D/filament/fdm_filament_pc.json b/resources/profiles/re3D/filament/fdm_filament_pc.json index 46e7670b93..58bd1fcb5f 100644 --- a/resources/profiles/re3D/filament/fdm_filament_pc.json +++ b/resources/profiles/re3D/filament/fdm_filament_pc.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "fdm_filament_pc", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "filament_type": [ "PC" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/fdm_filament_pet.json b/resources/profiles/re3D/filament/fdm_filament_pet.json index 3aab46b0d5..1366d9007d 100644 --- a/resources/profiles/re3D/filament/fdm_filament_pet.json +++ b/resources/profiles/re3D/filament/fdm_filament_pet.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "fdm_filament_pet", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "filament_type": [ "PETG" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/fdm_filament_pla.json b/resources/profiles/re3D/filament/fdm_filament_pla.json index b678250264..afb8d68adf 100644 --- a/resources/profiles/re3D/filament/fdm_filament_pla.json +++ b/resources/profiles/re3D/filament/fdm_filament_pla.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "fdm_filament_pla", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "filament_type": [ "PLA" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/fdm_filament_pp.json b/resources/profiles/re3D/filament/fdm_filament_pp.json index 16a1c9705d..2eb4a7e3e5 100644 --- a/resources/profiles/re3D/filament/fdm_filament_pp.json +++ b/resources/profiles/re3D/filament/fdm_filament_pp.json @@ -1,10 +1,10 @@ { "type": "filament", "name": "fdm_filament_pp", + "inherits": "fdm_filament_common", "from": "system", "instantiation": "false", - "inherits": "fdm_filament_common", "filament_type": [ "PP" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D PC @0.4 nozzle.json b/resources/profiles/re3D/filament/re3D PC @0.4 nozzle.json index aa4a0baa91..c449570508 100644 --- a/resources/profiles/re3D/filament/re3D PC @0.4 nozzle.json +++ b/resources/profiles/re3D/filament/re3D PC @0.4 nozzle.json @@ -1,12 +1,12 @@ { "type": "filament", "name": "re3D PC @0.4 nozzle", - "from": "system", "renamed_from": "re3D PC", - "instantiation": "true", "inherits": "fdm_filament_pc", - "filament_id": "OFU3QXL7", + "from": "system", "setting_id": "6yqRE2eSyER7X82N", + "filament_id": "OFU3QXL7", + "instantiation": "true", "filament_settings_id": [ "re3D PC @0.4 nozzle" ], @@ -174,4 +174,4 @@ "filament_stamping_distance": [ "0" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D PC @0.8 nozzle.json b/resources/profiles/re3D/filament/re3D PC @0.8 nozzle.json index 370a16baca..cd8fb98c77 100644 --- a/resources/profiles/re3D/filament/re3D PC @0.8 nozzle.json +++ b/resources/profiles/re3D/filament/re3D PC @0.8 nozzle.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "re3D PC @0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pc", - "filament_id": "OFU3QXL7", + "from": "system", "setting_id": "YVPbVSiVCzjp5ynf", + "filament_id": "OFU3QXL7", + "instantiation": "true", "filament_settings_id": [ "re3D PC @0.8 nozzle" ], @@ -173,4 +173,4 @@ "filament_stamping_distance": [ "0" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D PETG @0.4 nozzle.json b/resources/profiles/re3D/filament/re3D PETG @0.4 nozzle.json index 444fa42c55..d855ba13db 100644 --- a/resources/profiles/re3D/filament/re3D PETG @0.4 nozzle.json +++ b/resources/profiles/re3D/filament/re3D PETG @0.4 nozzle.json @@ -1,12 +1,12 @@ { "type": "filament", "name": "re3D PETG @0.4 nozzle", - "from": "system", "renamed_from": "re3D PETG", - "instantiation": "true", "inherits": "fdm_filament_pet", - "filament_id": "OF3F63OE", + "from": "system", "setting_id": "epcrSCwjgRXMycBx", + "filament_id": "OF3F63OE", + "instantiation": "true", "filament_settings_id": [ "re3D PETG @0.4 nozzle" ], @@ -174,4 +174,4 @@ "filament_stamping_distance": [ "0" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D PETG @0.8 nozzle.json b/resources/profiles/re3D/filament/re3D PETG @0.8 nozzle.json index 93ae0e65a2..188406d9b6 100644 --- a/resources/profiles/re3D/filament/re3D PETG @0.8 nozzle.json +++ b/resources/profiles/re3D/filament/re3D PETG @0.8 nozzle.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "re3D PETG @0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pet", - "filament_id": "OF3F63OE", + "from": "system", "setting_id": "MoQie1JMlUeH0BwR", + "filament_id": "OF3F63OE", + "instantiation": "true", "filament_settings_id": [ "re3D PETG @0.8 nozzle" ], @@ -173,4 +173,4 @@ "filament_stamping_distance": [ "0" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D PLA @0.4 nozzle.json b/resources/profiles/re3D/filament/re3D PLA @0.4 nozzle.json index 0314778218..dcd1eda8dd 100644 --- a/resources/profiles/re3D/filament/re3D PLA @0.4 nozzle.json +++ b/resources/profiles/re3D/filament/re3D PLA @0.4 nozzle.json @@ -1,12 +1,12 @@ { "type": "filament", "name": "re3D PLA @0.4 nozzle", - "from": "system", "renamed_from": "re3D PLA", - "instantiation": "true", "inherits": "fdm_filament_pla", - "filament_id": "OFRyOsZj", + "from": "system", "setting_id": "M8OOntNjjDBR4W32", + "filament_id": "OFRyOsZj", + "instantiation": "true", "filament_settings_id": [ "re3D PLA @0.4 nozzle" ], @@ -175,4 +175,4 @@ "filament_stamping_distance": [ "0" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D PLA @0.8 nozzle.json b/resources/profiles/re3D/filament/re3D PLA @0.8 nozzle.json index f537d9316c..0af2e0ac5e 100644 --- a/resources/profiles/re3D/filament/re3D PLA @0.8 nozzle.json +++ b/resources/profiles/re3D/filament/re3D PLA @0.8 nozzle.json @@ -1,11 +1,11 @@ { "type": "filament", "name": "re3D PLA @0.8 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pla", - "filament_id": "OFRyOsZj", + "from": "system", "setting_id": "SpF19Y2sSYbPHyxz", + "filament_id": "OFRyOsZj", + "instantiation": "true", "filament_settings_id": [ "re3D PLA @0.8 nozzle" ], @@ -174,4 +174,4 @@ "filament_stamping_distance": [ "0" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D rPETG @0.8 nozzle.json b/resources/profiles/re3D/filament/re3D rPETG @0.8 nozzle.json index 5bc3c037bf..cdbb1e4a60 100644 --- a/resources/profiles/re3D/filament/re3D rPETG @0.8 nozzle.json +++ b/resources/profiles/re3D/filament/re3D rPETG @0.8 nozzle.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFmCOW2Y", - "setting_id": "WlELqPVnuL7DaTxs", "name": "re3D rPETG @0.8 nozzle", - "from": "system", "renamed_from": "re3D Greengate rPETG @0.8 nozzle;re3D rPETG;re3D Greengate rPETG", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "WlELqPVnuL7DaTxs", + "filament_id": "OFmCOW2Y", + "instantiation": "true", "nozzle_temperature_initial_layer": [ "0" ], @@ -117,4 +117,4 @@ "re3D GigabotX 2 XLT 0.8 nozzle", "re3D TerabotX 2 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D rPETG @1.75 nozzle.json b/resources/profiles/re3D/filament/re3D rPETG @1.75 nozzle.json index 888880055f..06c9f7ade1 100644 --- a/resources/profiles/re3D/filament/re3D rPETG @1.75 nozzle.json +++ b/resources/profiles/re3D/filament/re3D rPETG @1.75 nozzle.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFmCOW2Y", - "setting_id": "sHzO2S3mmE6Iqs2O", "name": "re3D rPETG @1.75 nozzle", - "from": "system", "renamed_from": "re3D Greengate rPETG @1.75 nozzle", - "instantiation": "true", "inherits": "fdm_filament_pet", + "from": "system", + "setting_id": "sHzO2S3mmE6Iqs2O", + "filament_id": "OFmCOW2Y", + "instantiation": "true", "nozzle_temperature_initial_layer": [ "0" ], @@ -117,4 +117,4 @@ "re3D GigabotX 2 XLT 1.75 nozzle", "re3D TerabotX 2 1.75 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D rPP @0.8 nozzle.json b/resources/profiles/re3D/filament/re3D rPP @0.8 nozzle.json index 0b8b99eda1..b663a0dbce 100644 --- a/resources/profiles/re3D/filament/re3D rPP @0.8 nozzle.json +++ b/resources/profiles/re3D/filament/re3D rPP @0.8 nozzle.json @@ -1,12 +1,12 @@ { "type": "filament", - "filament_id": "OFfHGM1D", - "setting_id": "i9ii0b7qFYWnkGSq", "name": "re3D rPP @0.8 nozzle", - "from": "system", "renamed_from": "re3D rPP", - "instantiation": "true", "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "i9ii0b7qFYWnkGSq", + "filament_id": "OFfHGM1D", + "instantiation": "true", "filament_type": [ "PP" ], @@ -63,4 +63,4 @@ "re3D GigabotX 2 XLT 0.8 nozzle", "re3D TerabotX 2 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/filament/re3D rPP @1.75 nozzle.json b/resources/profiles/re3D/filament/re3D rPP @1.75 nozzle.json index e0b8574ab7..fe56a99f39 100644 --- a/resources/profiles/re3D/filament/re3D rPP @1.75 nozzle.json +++ b/resources/profiles/re3D/filament/re3D rPP @1.75 nozzle.json @@ -1,11 +1,11 @@ { "type": "filament", - "filament_id": "OFfHGM1D", - "setting_id": "356nOwsfGLI3CNqU", "name": "re3D rPP @1.75 nozzle", - "from": "system", - "instantiation": "true", "inherits": "fdm_filament_pp", + "from": "system", + "setting_id": "356nOwsfGLI3CNqU", + "filament_id": "OFfHGM1D", + "instantiation": "true", "filament_type": [ "PP" ], @@ -62,4 +62,4 @@ "re3D GigabotX 2 XLT 1.75 nozzle", "re3D TerabotX 2 1.75 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/machine/fdm_re3D_common.json b/resources/profiles/re3D/machine/fdm_re3D_common.json index b8922e2fb9..3924573048 100644 --- a/resources/profiles/re3D/machine/fdm_re3D_common.json +++ b/resources/profiles/re3D/machine/fdm_re3D_common.json @@ -1,9 +1,11 @@ { + "type": "machine", + "name": "fdm_re3D_common", + "inherits": "fdm_machine_common", + "instantiation": "false", "bed_exclude_area": [ "0x0" ], - "instantiation": "false", - "type": "machine", "deretraction_speed": [ "30", "30" @@ -16,13 +18,11 @@ "extruders_count": [ "2" ], - "inherits": "fdm_machine_common", "machine_end_gcode": "G92 E0\nTURN_OFF_HEATERS\nG28 X Y\nM18\nM107", "machine_start_gcode": "M83 ; Use relative extrusion distances\nG28 ; Home all axes\nM140 S{first_layer_bed_temperature[initial_tool]} ; Start heating bed\nM190 S{first_layer_bed_temperature[initial_tool]} ; Wait for bed to reach temperature\n\nT{initial_tool}\n\n\n; ---------------------------\n; HEAT THE USED TOOL\n; ---------------------------\n{if is_extruder_used[initial_tool]}\nM104 T{initial_tool} S{first_layer_temperature[initial_tool]} ; Preheat active extruder to first layer temperature\nM109 T{initial_tool} S{first_layer_temperature[initial_tool]} ; Wait for active extruder to reach temperature\n{endif}\n\nG1 F18000\nG4 S0\nG92 E0", "machine_tool_change_time": [ "90" ], - "name": "fdm_re3D_common", "printer_technology": "FFF", "retract_before_wipe": [ "70%", @@ -128,4 +128,4 @@ ], "wipe_tower_type": "type2", "z_offset": "0" -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/machine/re3D Gigabot 4 0.4 nozzle.json b/resources/profiles/re3D/machine/re3D Gigabot 4 0.4 nozzle.json index 6ab8f4ed61..394edef4ba 100644 --- a/resources/profiles/re3D/machine/re3D Gigabot 4 0.4 nozzle.json +++ b/resources/profiles/re3D/machine/re3D Gigabot 4 0.4 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D Gigabot 4 0.4 nozzle", "inherits": "fdm_re3D_common", + "setting_id": "2FfoXQpNqgdO0psS", "instantiation": "true", "machine_tech": "FFF", "model_id": "GB4", @@ -31,6 +32,5 @@ "re3D PETG @0.4 nozzle" ], "default_print_profile": "0.26 Standard", - "printer_settings_id": "re3d_gigbot4_04", - "setting_id": "2FfoXQpNqgdO0psS" -} \ No newline at end of file + "printer_settings_id": "re3d_gigbot4_04" +} diff --git a/resources/profiles/re3D/machine/re3D Gigabot 4 0.8 nozzle.json b/resources/profiles/re3D/machine/re3D Gigabot 4 0.8 nozzle.json index e87cdacef1..87086d516b 100644 --- a/resources/profiles/re3D/machine/re3D Gigabot 4 0.8 nozzle.json +++ b/resources/profiles/re3D/machine/re3D Gigabot 4 0.8 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D Gigabot 4 0.8 nozzle", "inherits": "fdm_re3D_common", + "setting_id": "t5Efv7WaUvnPYIAm", "instantiation": "true", "machine_tech": "FFF", "model_id": "GB4", @@ -31,6 +32,5 @@ "re3D PETG @0.8 nozzle" ], "default_print_profile": "0.4 Standard", - "printer_settings_id": "re3d_gigbot4_08", - "setting_id": "t5Efv7WaUvnPYIAm" -} \ No newline at end of file + "printer_settings_id": "re3d_gigbot4_08" +} diff --git a/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.4 nozzle.json b/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.4 nozzle.json index dedb29c3e8..b58338c041 100644 --- a/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.4 nozzle.json +++ b/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.4 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D Gigabot 4 XLT 0.4 nozzle", "inherits": "fdm_re3D_common", + "setting_id": "UrYpMJff1UulWnSk", "instantiation": "true", "machine_tech": "FFF", "model_id": "GB4", @@ -31,6 +32,5 @@ "re3D PETG @0.4 nozzle" ], "default_print_profile": "0.26 Standard", - "printer_settings_id": "re3d_gigabot4_xlt_04", - "setting_id": "UrYpMJff1UulWnSk" -} \ No newline at end of file + "printer_settings_id": "re3d_gigabot4_xlt_04" +} diff --git a/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.8 nozzle.json b/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.8 nozzle.json index f34890289c..8fd896087e 100644 --- a/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.8 nozzle.json +++ b/resources/profiles/re3D/machine/re3D Gigabot 4 XLT 0.8 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D Gigabot 4 XLT 0.8 nozzle", "inherits": "fdm_re3D_common", + "setting_id": "owqU0OvESWbbsBaw", "instantiation": "true", "machine_tech": "FFF", "model_id": "GB4", @@ -31,6 +32,5 @@ "re3D PETG @0.8 nozzle" ], "default_print_profile": "0.4 Standard", - "printer_settings_id": "re3d_gigabot4_xlt_08", - "setting_id": "owqU0OvESWbbsBaw" -} \ No newline at end of file + "printer_settings_id": "re3d_gigabot4_xlt_08" +} diff --git a/resources/profiles/re3D/machine/re3D Gigabot 4 XLT.json b/resources/profiles/re3D/machine/re3D Gigabot 4 XLT.json index fd7858de60..5fa299ee5e 100644 --- a/resources/profiles/re3D/machine/re3D Gigabot 4 XLT.json +++ b/resources/profiles/re3D/machine/re3D Gigabot 4 XLT.json @@ -1,9 +1,9 @@ { "type": "machine_model", "name": "re3D Gigabot 4 XLT", + "instantiation": "false", "model_id": "re3D Gigabot 4 XLT", "nozzle_diameter": "0.4;0.8", - "instantiation": "false", "machine_tech": "FFF", "family": "re3D", "bed_model": "", diff --git a/resources/profiles/re3D/machine/re3D Gigabot 4.json b/resources/profiles/re3D/machine/re3D Gigabot 4.json index 67531b1214..9926381d68 100644 --- a/resources/profiles/re3D/machine/re3D Gigabot 4.json +++ b/resources/profiles/re3D/machine/re3D Gigabot 4.json @@ -1,9 +1,9 @@ { "type": "machine_model", "name": "re3D Gigabot 4", + "instantiation": "false", "model_id": "re3D Gigabot 4", "nozzle_diameter": "0.4;0.8", - "instantiation": "false", "machine_tech": "FFF", "family": "re3D", "bed_model": "", diff --git a/resources/profiles/re3D/machine/re3D GigabotX 2 0.8 nozzle.json b/resources/profiles/re3D/machine/re3D GigabotX 2 0.8 nozzle.json index f6bac17a0d..7765edcebe 100644 --- a/resources/profiles/re3D/machine/re3D GigabotX 2 0.8 nozzle.json +++ b/resources/profiles/re3D/machine/re3D GigabotX 2 0.8 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D GigabotX 2 0.8 nozzle", "inherits": "fgf_re3D_common", + "setting_id": "pASXL7fDFXAG0tkJ", "instantiation": "true", "machine_tech": "FGF", "model_id": "re3D GBX2", @@ -28,6 +29,5 @@ "re3D rPETG @0.8 nozzle" ], "default_print_profile": "0.6 Standard", - "printer_settings_id": "re3d_gbx_08", - "setting_id": "pASXL7fDFXAG0tkJ" -} \ No newline at end of file + "printer_settings_id": "re3d_gbx_08" +} diff --git a/resources/profiles/re3D/machine/re3D GigabotX 2 1.75 nozzle.json b/resources/profiles/re3D/machine/re3D GigabotX 2 1.75 nozzle.json index 585c219bc7..d827deb4ff 100644 --- a/resources/profiles/re3D/machine/re3D GigabotX 2 1.75 nozzle.json +++ b/resources/profiles/re3D/machine/re3D GigabotX 2 1.75 nozzle.json @@ -3,6 +3,7 @@ "name": "re3D GigabotX 2 1.75 nozzle", "renamed_from": "re3D Gigabot X2 1.75 nozzle", "inherits": "fgf_re3D_common", + "setting_id": "ozJ43xjd5bOWGvPH", "instantiation": "true", "machine_tech": "FGF", "model_id": "re3D GBX2", @@ -29,6 +30,5 @@ "re3D rPETG @1.75 nozzle" ], "default_print_profile": "1.0 Standard", - "printer_settings_id": "re3d_gbx_175", - "setting_id": "ozJ43xjd5bOWGvPH" -} \ No newline at end of file + "printer_settings_id": "re3d_gbx_175" +} diff --git a/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 0.8 nozzle.json b/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 0.8 nozzle.json index 863d8e6403..a9b0c1e3c5 100644 --- a/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 0.8 nozzle.json +++ b/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 0.8 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D GigabotX 2 XLT 0.8 nozzle", "inherits": "fgf_re3D_common", + "setting_id": "66tcU44A7VD232wV", "instantiation": "true", "machine_tech": "FGF", "model_id": "re3D GBX2 XLT", @@ -28,6 +29,5 @@ "re3D rPETG @0.8 nozzle" ], "default_print_profile": "0.6 Standard", - "printer_settings_id": "re3d_gbx_xlt_08", - "setting_id": "66tcU44A7VD232wV" -} \ No newline at end of file + "printer_settings_id": "re3d_gbx_xlt_08" +} diff --git a/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 1.75 nozzle.json b/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 1.75 nozzle.json index 5784b4e673..76023b8a1b 100644 --- a/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 1.75 nozzle.json +++ b/resources/profiles/re3D/machine/re3D GigabotX 2 XLT 1.75 nozzle.json @@ -3,6 +3,7 @@ "name": "re3D GigabotX 2 XLT 1.75 nozzle", "renamed_from": "re3D Gigabot X2 XLT 1.75 nozzle", "inherits": "fgf_re3D_common", + "setting_id": "L0PKsbwUEul8gil3", "instantiation": "true", "machine_tech": "FGF", "model_id": "re3D GBX2 XLT", @@ -29,6 +30,5 @@ "re3D rPETG @1.75 nozzle" ], "default_print_profile": "1.0 Standard", - "printer_settings_id": "re3d_gbx_xlt_175", - "setting_id": "L0PKsbwUEul8gil3" -} \ No newline at end of file + "printer_settings_id": "re3d_gbx_xlt_175" +} diff --git a/resources/profiles/re3D/machine/re3D GigabotX 2 XLT.json b/resources/profiles/re3D/machine/re3D GigabotX 2 XLT.json index 1b77360139..0e14643a29 100644 --- a/resources/profiles/re3D/machine/re3D GigabotX 2 XLT.json +++ b/resources/profiles/re3D/machine/re3D GigabotX 2 XLT.json @@ -1,9 +1,9 @@ { "type": "machine_model", "name": "re3D GigabotX 2 XLT", + "instantiation": "false", "model_id": "re3D GigabotX 2 XLT", "nozzle_diameter": "0.8;1.75", - "instantiation": "false", "machine_tech": "FGF", "family": "re3D", "bed_model": "", diff --git a/resources/profiles/re3D/machine/re3D GigabotX 2.json b/resources/profiles/re3D/machine/re3D GigabotX 2.json index 20ec4ff207..b57f46585d 100644 --- a/resources/profiles/re3D/machine/re3D GigabotX 2.json +++ b/resources/profiles/re3D/machine/re3D GigabotX 2.json @@ -1,9 +1,9 @@ { "type": "machine_model", "name": "re3D GigabotX 2", + "instantiation": "false", "model_id": "re3D GigabotX 2", "nozzle_diameter": "0.8;1.75", - "instantiation": "false", "machine_tech": "FGF", "family": "re3D", "bed_model": "", diff --git a/resources/profiles/re3D/machine/re3D Terabot 4 0.4 nozzle.json b/resources/profiles/re3D/machine/re3D Terabot 4 0.4 nozzle.json index e57e4058af..f151217f96 100644 --- a/resources/profiles/re3D/machine/re3D Terabot 4 0.4 nozzle.json +++ b/resources/profiles/re3D/machine/re3D Terabot 4 0.4 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D Terabot 4 0.4 nozzle", "inherits": "fdm_re3D_common", + "setting_id": "fjQ7KSytjKq40DSo", "instantiation": "true", "machine_tech": "FFF", "model_id": "TB4", @@ -31,6 +32,5 @@ "re3D PETG @0.4 nozzle" ], "default_print_profile": "0.26 Standard", - "printer_settings_id": "re3d_terabot4_04", - "setting_id": "fjQ7KSytjKq40DSo" -} \ No newline at end of file + "printer_settings_id": "re3d_terabot4_04" +} diff --git a/resources/profiles/re3D/machine/re3D Terabot 4 0.8 nozzle.json b/resources/profiles/re3D/machine/re3D Terabot 4 0.8 nozzle.json index c15ac1f8b9..67db6a6a72 100644 --- a/resources/profiles/re3D/machine/re3D Terabot 4 0.8 nozzle.json +++ b/resources/profiles/re3D/machine/re3D Terabot 4 0.8 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D Terabot 4 0.8 nozzle", "inherits": "fdm_re3D_common", + "setting_id": "EsfqTpN28Qmlaov3", "instantiation": "true", "machine_tech": "FFF", "model_id": "TB4", @@ -31,6 +32,5 @@ "re3D PETG @0.8 nozzle" ], "default_print_profile": "0.4 Standard", - "printer_settings_id": "re3d_terabot4_08", - "setting_id": "EsfqTpN28Qmlaov3" -} \ No newline at end of file + "printer_settings_id": "re3d_terabot4_08" +} diff --git a/resources/profiles/re3D/machine/re3D Terabot 4.json b/resources/profiles/re3D/machine/re3D Terabot 4.json index eaca67fba0..000cc921bf 100644 --- a/resources/profiles/re3D/machine/re3D Terabot 4.json +++ b/resources/profiles/re3D/machine/re3D Terabot 4.json @@ -1,9 +1,9 @@ { "type": "machine_model", "name": "re3D Terabot 4", + "instantiation": "false", "model_id": "re3D Terabot 4", "nozzle_diameter": "0.4;0.8", - "instantiation": "false", "machine_tech": "FFF", "family": "re3D", "bed_model": "", diff --git a/resources/profiles/re3D/machine/re3D TerabotX 2 0.8 nozzle.json b/resources/profiles/re3D/machine/re3D TerabotX 2 0.8 nozzle.json index 5622a813c1..86b1d77c6e 100644 --- a/resources/profiles/re3D/machine/re3D TerabotX 2 0.8 nozzle.json +++ b/resources/profiles/re3D/machine/re3D TerabotX 2 0.8 nozzle.json @@ -2,6 +2,7 @@ "type": "machine", "name": "re3D TerabotX 2 0.8 nozzle", "inherits": "fgf_re3D_common", + "setting_id": "A6jcgezqyq6DE5mi", "instantiation": "true", "machine_tech": "FGF", "model_id": "re3D TBX2", @@ -28,6 +29,5 @@ "re3D rPETG @0.8 nozzle" ], "default_print_profile": "0.6 Standard", - "printer_settings_id": "re3d_tbx2_08", - "setting_id": "A6jcgezqyq6DE5mi" -} \ No newline at end of file + "printer_settings_id": "re3d_tbx2_08" +} diff --git a/resources/profiles/re3D/machine/re3D TerabotX 2 1.75 nozzle.json b/resources/profiles/re3D/machine/re3D TerabotX 2 1.75 nozzle.json index 398ab006bd..c8b865bfd8 100644 --- a/resources/profiles/re3D/machine/re3D TerabotX 2 1.75 nozzle.json +++ b/resources/profiles/re3D/machine/re3D TerabotX 2 1.75 nozzle.json @@ -3,6 +3,7 @@ "name": "re3D TerabotX 2 1.75 nozzle", "renamed_from": "re3D Terabot X2 1.75 nozzle", "inherits": "fgf_re3D_common", + "setting_id": "FCcmkG4pnJhjZUBd", "instantiation": "true", "machine_tech": "FGF", "model_id": "re3D TBX2", @@ -29,6 +30,5 @@ "re3D rPETG @1.75 nozzle" ], "default_print_profile": "1.0 Standard", - "printer_settings_id": "re3d_tbx2_175", - "setting_id": "FCcmkG4pnJhjZUBd" -} \ No newline at end of file + "printer_settings_id": "re3d_tbx2_175" +} diff --git a/resources/profiles/re3D/machine/re3D TerabotX 2.json b/resources/profiles/re3D/machine/re3D TerabotX 2.json index 177c1e05d0..bbd8b1c22a 100644 --- a/resources/profiles/re3D/machine/re3D TerabotX 2.json +++ b/resources/profiles/re3D/machine/re3D TerabotX 2.json @@ -1,9 +1,9 @@ { "type": "machine_model", "name": "re3D TerabotX 2", + "instantiation": "false", "model_id": "re3D TerabotX 2", "nozzle_diameter": "0.8;1.75", - "instantiation": "false", "machine_tech": "FGF", "family": "re3D", "bed_model": "", diff --git a/resources/profiles/re3D/process/0.26mm Standard @re3D fdm 0.4.json b/resources/profiles/re3D/process/0.26mm Standard @re3D fdm 0.4.json index 2ab80cdf26..1bef3f24ab 100644 --- a/resources/profiles/re3D/process/0.26mm Standard @re3D fdm 0.4.json +++ b/resources/profiles/re3D/process/0.26mm Standard @re3D fdm 0.4.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "z8J2jOmdssB8DCBO", "name": "0.26 Standard", "renamed_from": "0.26mm Standard @re3D fdm 0.4", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_re3D_common", + "from": "system", + "setting_id": "z8J2jOmdssB8DCBO", + "instantiation": "true", "compatible_printers": [ "re3D Gigabot 4 0.4 nozzle", "re3D Gigabot 4 XLT 0.4 nozzle", @@ -24,33 +24,33 @@ "support_top_z_distance": "0.2", "support_bottom_z_distance": "0.2", "bridge_speed": "50", - "internal_bridge_speed": "150%", - "default_acceleration": "5000", - "outer_wall_speed": "60", - "initial_layer_speed": "50", - "gap_infill_speed": "60", - "sparse_infill_speed": "80", - "inner_wall_speed": "80", - "internal_solid_infill_speed": "80", - "support_interface_speed": "30", - "support_speed": "90", - "top_surface_speed": "50", - "travel_speed": "300", - "top_surface_acceleration": "2500", - "initial_layer_acceleration": "1000", - "travel_acceleration": "5000", - "inner_wall_acceleration": "5000", - "ironing_speed": "25", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "initial_layer_infill_speed": "50", - "outer_wall_acceleration": "2500", - "bridge_acceleration": "3500", - "sparse_infill_acceleration": "5000", - "internal_solid_infill_acceleration": "5000", - "initial_layer_travel_speed": "100%", - "small_perimeter_speed": "50%", + "internal_bridge_speed": "150%", + "default_acceleration": "5000", + "outer_wall_speed": "60", + "initial_layer_speed": "50", + "gap_infill_speed": "60", + "sparse_infill_speed": "80", + "inner_wall_speed": "80", + "internal_solid_infill_speed": "80", + "support_interface_speed": "30", + "support_speed": "90", + "top_surface_speed": "50", + "travel_speed": "300", + "top_surface_acceleration": "2500", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "ironing_speed": "25", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "initial_layer_infill_speed": "50", + "outer_wall_acceleration": "2500", + "bridge_acceleration": "3500", + "sparse_infill_acceleration": "5000", + "internal_solid_infill_acceleration": "5000", + "initial_layer_travel_speed": "100%", + "small_perimeter_speed": "50%", "filename_format": "{input_filename_base}_{\"E\"}{initial_tool}_{filament_type[initial_tool]}_{print_time}.gcode" } diff --git a/resources/profiles/re3D/process/0.2mm Fine @re3D fdm 0.4.json b/resources/profiles/re3D/process/0.2mm Fine @re3D fdm 0.4.json index 10013e9c36..5b2d009cf4 100644 --- a/resources/profiles/re3D/process/0.2mm Fine @re3D fdm 0.4.json +++ b/resources/profiles/re3D/process/0.2mm Fine @re3D fdm 0.4.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "u9PNexqDf7jWUnnH", "name": "0.2 Fine", "renamed_from": "0.2mm Fine @re3D fdm 0.4", - "from": "system", "inherits": "fdm_process_re3D_common", + "from": "system", + "setting_id": "u9PNexqDf7jWUnnH", "instantiation": "true", "compatible_printers": [ "re3D Gigabot 4 0.4 nozzle", @@ -24,30 +24,30 @@ "support_top_z_distance": "0.2", "support_bottom_z_distance": "0.2", "outer_wall_speed": "60", - "initial_layer_speed": "50", - "gap_infill_speed": "60", - "sparse_infill_speed": "80", - "inner_wall_speed": "80", - "internal_solid_infill_speed": "80", - "support_interface_speed": "30", - "support_speed": "90", - "top_surface_speed": "50", - "travel_speed": "300", - "top_surface_acceleration": "2500", - "initial_layer_acceleration": "1000", - "travel_acceleration": "5000", - "inner_wall_acceleration": "5000", - "ironing_speed": "25", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "initial_layer_infill_speed": "50", - "outer_wall_acceleration": "2500", - "bridge_acceleration": "3500", - "sparse_infill_acceleration": "5000", - "internal_solid_infill_acceleration": "5000", - "initial_layer_travel_speed": "100%", - "small_perimeter_speed": "50%", + "initial_layer_speed": "50", + "gap_infill_speed": "60", + "sparse_infill_speed": "80", + "inner_wall_speed": "80", + "internal_solid_infill_speed": "80", + "support_interface_speed": "30", + "support_speed": "90", + "top_surface_speed": "50", + "travel_speed": "300", + "top_surface_acceleration": "2500", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "ironing_speed": "25", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "initial_layer_infill_speed": "50", + "outer_wall_acceleration": "2500", + "bridge_acceleration": "3500", + "sparse_infill_acceleration": "5000", + "internal_solid_infill_acceleration": "5000", + "initial_layer_travel_speed": "100%", + "small_perimeter_speed": "50%", "filename_format": "{input_filename_base}_{\"E\"}{initial_tool}_{filament_type[initial_tool]}_{print_time}.gcode" } diff --git a/resources/profiles/re3D/process/0.32mm Draft @re3D fdm 0.4.json b/resources/profiles/re3D/process/0.32mm Draft @re3D fdm 0.4.json index 1b14349f81..b64285819c 100644 --- a/resources/profiles/re3D/process/0.32mm Draft @re3D fdm 0.4.json +++ b/resources/profiles/re3D/process/0.32mm Draft @re3D fdm 0.4.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "pcKSZbNmByNtOHYX", "name": "0.32 Draft", "renamed_from": "0.32mm Draft @re3D fdm 0.4", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_re3D_common", + "from": "system", + "setting_id": "pcKSZbNmByNtOHYX", + "instantiation": "true", "compatible_printers": [ "re3D Gigabot 4 0.4 nozzle", "re3D Gigabot 4 XLT 0.4 nozzle", @@ -24,30 +24,30 @@ "support_top_z_distance": "0.35", "support_bottom_z_distance": "0.35", "outer_wall_speed": "60", - "initial_layer_speed": "50", - "gap_infill_speed": "60", - "sparse_infill_speed": "80", - "inner_wall_speed": "80", - "internal_solid_infill_speed": "80", - "support_interface_speed": "30", - "support_speed": "90", - "top_surface_speed": "50", - "travel_speed": "300", - "top_surface_acceleration": "2500", - "initial_layer_acceleration": "1000", - "travel_acceleration": "5000", - "inner_wall_acceleration": "5000", - "ironing_speed": "25", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "initial_layer_infill_speed": "50", - "outer_wall_acceleration": "2500", - "bridge_acceleration": "3500", - "sparse_infill_acceleration": "5000", - "internal_solid_infill_acceleration": "5000", - "initial_layer_travel_speed": "100%", - "small_perimeter_speed": "50%", + "initial_layer_speed": "50", + "gap_infill_speed": "60", + "sparse_infill_speed": "80", + "inner_wall_speed": "80", + "internal_solid_infill_speed": "80", + "support_interface_speed": "30", + "support_speed": "90", + "top_surface_speed": "50", + "travel_speed": "300", + "top_surface_acceleration": "2500", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "ironing_speed": "25", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "initial_layer_infill_speed": "50", + "outer_wall_acceleration": "2500", + "bridge_acceleration": "3500", + "sparse_infill_acceleration": "5000", + "internal_solid_infill_acceleration": "5000", + "initial_layer_travel_speed": "100%", + "small_perimeter_speed": "50%", "filename_format": "{input_filename_base}_{\"E\"}{initial_tool}_{filament_type[initial_tool]}_{print_time}.gcode" } diff --git a/resources/profiles/re3D/process/0.3mm Fine @re3D fdm 0.8.json b/resources/profiles/re3D/process/0.3mm Fine @re3D fdm 0.8.json index 2b35f2c1f8..a5418c1cee 100644 --- a/resources/profiles/re3D/process/0.3mm Fine @re3D fdm 0.8.json +++ b/resources/profiles/re3D/process/0.3mm Fine @re3D fdm 0.8.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "ChglxET1YwzVuD6a", "name": "0.3 Fine", "renamed_from": "0.2mm Standard @re3D fdm 0.8", - "from": "system", "inherits": "fdm_process_re3D_common", + "from": "system", + "setting_id": "ChglxET1YwzVuD6a", "instantiation": "true", "compatible_printers": [ "re3D Gigabot 4 0.8 nozzle", @@ -24,30 +24,30 @@ "support_top_z_distance": "0.24", "support_bottom_z_distance": "0.24", "outer_wall_speed": "60", - "initial_layer_speed": "50", - "gap_infill_speed": "60", - "sparse_infill_speed": "80", - "inner_wall_speed": "80", - "internal_solid_infill_speed": "80", - "support_interface_speed": "30", - "support_speed": "90", - "top_surface_speed": "50", - "travel_speed": "300", - "top_surface_acceleration": "2500", - "initial_layer_acceleration": "1000", - "travel_acceleration": "5000", - "inner_wall_acceleration": "5000", - "ironing_speed": "25", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "initial_layer_infill_speed": "50", - "outer_wall_acceleration": "2500", - "bridge_acceleration": "3500", - "sparse_infill_acceleration": "5000", - "internal_solid_infill_acceleration": "5000", - "initial_layer_travel_speed": "100%", - "small_perimeter_speed": "50%", + "initial_layer_speed": "50", + "gap_infill_speed": "60", + "sparse_infill_speed": "80", + "inner_wall_speed": "80", + "internal_solid_infill_speed": "80", + "support_interface_speed": "30", + "support_speed": "90", + "top_surface_speed": "50", + "travel_speed": "300", + "top_surface_acceleration": "2500", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "ironing_speed": "25", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "initial_layer_infill_speed": "50", + "outer_wall_acceleration": "2500", + "bridge_acceleration": "3500", + "sparse_infill_acceleration": "5000", + "internal_solid_infill_acceleration": "5000", + "initial_layer_travel_speed": "100%", + "small_perimeter_speed": "50%", "filename_format": "{input_filename_base}_{\"E\"}{initial_tool}_{filament_type[initial_tool]}_{print_time}.gcode" } diff --git a/resources/profiles/re3D/process/0.4mm Draft @re3D fdm 0.8.json b/resources/profiles/re3D/process/0.4mm Draft @re3D fdm 0.8.json index d00f8bce44..4ac2239ccb 100644 --- a/resources/profiles/re3D/process/0.4mm Draft @re3D fdm 0.8.json +++ b/resources/profiles/re3D/process/0.4mm Draft @re3D fdm 0.8.json @@ -1,11 +1,11 @@ { "type": "process", - "setting_id": "hiBgnEuKo4yjK3wp", "name": "0.4 Standard", "renamed_from": "0.4mm Draft @re3D fdm 0.8", - "from": "system", - "instantiation": "true", "inherits": "fdm_process_re3D_common", + "from": "system", + "setting_id": "hiBgnEuKo4yjK3wp", + "instantiation": "true", "compatible_printers": [ "re3D Gigabot 4 0.8 nozzle", "re3D Gigabot 4 XLT 0.8 nozzle", @@ -24,30 +24,30 @@ "support_top_z_distance": "0.42", "support_bottom_z_distance": "0.42", "outer_wall_speed": "60", - "initial_layer_speed": "50", - "gap_infill_speed": "60", - "sparse_infill_speed": "80", - "inner_wall_speed": "80", - "internal_solid_infill_speed": "80", - "support_interface_speed": "30", - "support_speed": "90", - "top_surface_speed": "50", - "travel_speed": "300", - "top_surface_acceleration": "2500", - "initial_layer_acceleration": "1000", - "travel_acceleration": "5000", - "inner_wall_acceleration": "5000", - "ironing_speed": "25", - "overhang_1_4_speed": "0", - "overhang_2_4_speed": "50", - "overhang_3_4_speed": "30", - "overhang_4_4_speed": "10", - "initial_layer_infill_speed": "50", - "outer_wall_acceleration": "2500", - "bridge_acceleration": "3500", - "sparse_infill_acceleration": "5000", - "internal_solid_infill_acceleration": "5000", - "initial_layer_travel_speed": "100%", - "small_perimeter_speed": "50%", + "initial_layer_speed": "50", + "gap_infill_speed": "60", + "sparse_infill_speed": "80", + "inner_wall_speed": "80", + "internal_solid_infill_speed": "80", + "support_interface_speed": "30", + "support_speed": "90", + "top_surface_speed": "50", + "travel_speed": "300", + "top_surface_acceleration": "2500", + "initial_layer_acceleration": "1000", + "travel_acceleration": "5000", + "inner_wall_acceleration": "5000", + "ironing_speed": "25", + "overhang_1_4_speed": "0", + "overhang_2_4_speed": "50", + "overhang_3_4_speed": "30", + "overhang_4_4_speed": "10", + "initial_layer_infill_speed": "50", + "outer_wall_acceleration": "2500", + "bridge_acceleration": "3500", + "sparse_infill_acceleration": "5000", + "internal_solid_infill_acceleration": "5000", + "initial_layer_travel_speed": "100%", + "small_perimeter_speed": "50%", "filename_format": "{input_filename_base}_{\"E\"}{initial_tool}_{filament_type[initial_tool]}_{print_time}.gcode" } diff --git a/resources/profiles/re3D/process/0.6mm Standard @re3D fgf 0.8.json b/resources/profiles/re3D/process/0.6mm Standard @re3D fgf 0.8.json index 80cc07b339..15c9322c23 100644 --- a/resources/profiles/re3D/process/0.6mm Standard @re3D fgf 0.8.json +++ b/resources/profiles/re3D/process/0.6mm Standard @re3D fgf 0.8.json @@ -1,9 +1,9 @@ { "type": "process", - "setting_id": "7V7GXJOUd5LT6YNi", "name": "0.6 Standard", - "from": "system", "inherits": "fgf_process_re3D_common", + "from": "system", + "setting_id": "7V7GXJOUd5LT6YNi", "instantiation": "true", "layer_height": "0.6", "initial_layer_print_height": "0.8", @@ -23,4 +23,4 @@ "re3D GigabotX 2 XLT 0.8 nozzle", "re3D TerabotX 2 0.8 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/profiles/re3D/process/1.0mm Standard @re3D fgf 1.75.json b/resources/profiles/re3D/process/1.0mm Standard @re3D fgf 1.75.json index 5f703baaec..cf41e6854d 100644 --- a/resources/profiles/re3D/process/1.0mm Standard @re3D fgf 1.75.json +++ b/resources/profiles/re3D/process/1.0mm Standard @re3D fgf 1.75.json @@ -1,10 +1,10 @@ { "type": "process", - "setting_id": "LKf4K1hjRuLeW7SM", "name": "1.0 Standard", "renamed_from": "1.0mm Standard @re3D fgf 1.75", - "from": "system", "inherits": "fgf_process_re3D_common", + "from": "system", + "setting_id": "LKf4K1hjRuLeW7SM", "instantiation": "true", "layer_height": "1.0", "initial_layer_print_height": "1.0", @@ -24,4 +24,4 @@ "re3D GigabotX 2 XLT 1.75 nozzle", "re3D TerabotX 2 1.75 nozzle" ] -} \ No newline at end of file +} diff --git a/resources/shaders/110/ssao.fs b/resources/shaders/110/ssao.fs index 5aada05883..db266daba1 100644 --- a/resources/shaders/110/ssao.fs +++ b/resources/shaders/110/ssao.fs @@ -7,18 +7,38 @@ uniform sampler2D color_texture; uniform sampler2D depth_texture; -uniform sampler2D normal_texture; uniform vec2 inv_tex_size; -uniform float z_near; uniform float z_far; uniform bool is_outline; +// The pass has no normal target to read, so the surface normal is reconstructed from the depth +// buffer. inv_projection_matrix unprojects a pixel back into view space and up_view is world +Z +// expressed in view space, which is what tells a top surface from a wall. +uniform mat4 inv_projection_matrix; +uniform vec3 up_view; varying vec2 tex_coord; -float linearize_depth(float depth) +// Position of the given pixel in view space. Valid under both an orthographic and a perspective +// camera, unlike the depth linearization it replaces. +vec3 view_pos(vec2 uv) { - float z = depth * 2.0 - 1.0; - return (2.0 * z_near * z_far) / (z_far + z_near - z * (z_far - z_near)); + vec2 c = clamp(uv, vec2(0.0), vec2(1.0)); + float d = texture2D(depth_texture, c).r; + vec4 ndc = vec4(c * 2.0 - 1.0, d * 2.0 - 1.0, 1.0); + vec4 view = inv_projection_matrix * ndc; + return view.xyz / view.w; +} + +// Surface normal at the given pixel, from the forward differences of the reconstructed view +// position. It rings by a pixel across a depth discontinuity, which is acceptable here: the +// normal only weights the occlusion, nothing is shaded with it. +vec3 view_normal(vec2 uv, vec3 p) +{ + vec3 px = view_pos(uv + vec2(inv_tex_size.x, 0.0)); + vec3 py = view_pos(uv + vec2(0.0, inv_tex_size.y)); + vec3 n = cross(px - p, py - p); + float len = length(n); + return (len > 1e-8) ? n / len : vec3(0.0, 0.0, 1.0); } void main() @@ -28,16 +48,21 @@ void main() return; } vec3 base = texture2D(color_texture, tex_coord).rgb; - float depth_center = linearize_depth(texture2D(depth_texture, tex_coord).r); - // Sample normal at current fragment (range: -1 to 1) - vec3 normal_center = texture2D(normal_texture, tex_coord).rgb * 2.0 - 1.0; + // Nothing was drawn here: occluding the background would only darken the gradient, and its + // reconstructed normal is degenerate anyway. + if (texture2D(depth_texture, tex_coord).r >= 0.9999) { + gl_FragColor = vec4(base, 1.0); + return; + } + + vec3 center_pos = view_pos(tex_coord); + float depth_center = -center_pos.z; + vec3 normal_center = view_normal(tex_coord, center_pos); // Calculate how much the surface faces upward - // up_factor = 1.0 for surfaces pointing straight up (0,0,1) - // up_factor = 0.0 for surfaces pointing down or sideways - float up_factor = max(0.0, normal_center.z); // Assuming Z is up axis - // Alternative: if Y is up, use normal_center.y + // up_factor = 1.0 for surfaces pointing straight up, 0.0 for walls and downward faces + float up_factor = clamp(dot(normal_center, up_view), 0.0, 1.0); // Adaptive sampling radius float radius = mix(2.0, 4.0, depth_center / z_far); @@ -52,39 +77,38 @@ void main() offsets[6] = vec2( 0.0, -1.0); offsets[7] = vec2( 0.707,-0.707); + // Occlusion is a slope, not a depth difference: how far a neighbour rises out of the + // centre's tangent plane over how far away it is. Unlike a raw difference, that sine is + // free of camera distance and zoom, so a crease reads the same from any view. + const float SLOPE_MIN = 0.08; // ~5 degrees, above the depth-buffer noise of a flat surface + const float SLOPE_MAX = 0.60; // ~37 degrees, a full crease + + const float SAMPLE_COUNT = 8.0; float occlusion = 0.0; - int valid_samples = 0; for (int i = 0; i < 8; ++i) { vec2 uv = tex_coord + offsets[i] * inv_tex_size * radius; - uv = clamp(uv, vec2(0.001), vec2(0.999)); - float sample_depth = linearize_depth(texture2D(depth_texture, uv).r); - float depth_diff = max(0.0, depth_center - sample_depth); - - float threshold = 0.015 * (0.5 + depth_center / z_far); - float contribution = smoothstep(0.001, threshold, depth_diff); + vec3 delta = view_pos(uv) - center_pos; + float dist = length(delta); + float rise = (dist > 1e-6) ? dot(delta, normal_center) / dist : 0.0; + float contribution = smoothstep(SLOPE_MIN, SLOPE_MAX, rise); float diagonal_weight = 1.0 - abs(offsets[i].x * offsets[i].y) * 0.5; occlusion += contribution * diagonal_weight; - valid_samples++; } - if (valid_samples > 0) - occlusion /= float(valid_samples); + occlusion /= SAMPLE_COUNT; // flatter/top-like surfaces get less darkening float ao_intensity = 0.55; float ambient_occlusion = 1.0 - occlusion * ao_intensity; - // Different min values for top vs bottom surfaces + // Different min values for top vs bottom surfaces. The boost that used to follow lifted a + // top surface back to within 2% of unoccluded once up_factor became a real normal rather + // than a colour, which is where the AO went; the floors alone shape the effect now. float ao_min = mix(0.45, 0.70, up_factor); // Bottom: 0.45, Top: 0.70 ambient_occlusion = clamp(ambient_occlusion, ao_min, 1.0); - // Boost brightness on top surfaces (optional) - float brightness_boost = 1.0 + up_factor * 0.15; // 15% extra brightness on top - ambient_occlusion = pow(ambient_occlusion, 2.2) * brightness_boost; - ambient_occlusion = clamp(ambient_occlusion, 0.45, 1.05); - gl_FragColor = vec4(base * ambient_occlusion, 1.0); -} \ No newline at end of file +} diff --git a/resources/shaders/140/ssao.fs b/resources/shaders/140/ssao.fs index b3b6df6877..28b561ba2c 100644 --- a/resources/shaders/140/ssao.fs +++ b/resources/shaders/140/ssao.fs @@ -1,24 +1,45 @@ #version 140 /** - * SSAO Shader - GLSL 140 version with sharp depth threshold + * SSAO Shader - GLSL 140 version with a slope-based occlusion test * Only darkens valleys/concave areas, ignores smooth variations */ uniform sampler2D color_texture; uniform sampler2D depth_texture; -uniform sampler2D normal_texture; -uniform float z_near; +uniform vec2 inv_tex_size; uniform float z_far; uniform bool is_outline; +// The pass has no normal target to read, so the surface normal is reconstructed from the depth +// buffer. inv_projection_matrix unprojects a pixel back into view space and up_view is world +Z +// expressed in view space, which is what tells a top surface from a wall. +uniform mat4 inv_projection_matrix; +uniform vec3 up_view; in vec2 tex_coord; out vec4 frag_color; -float linearize_depth(float depth) +// Position of the given pixel in view space. Valid under both an orthographic and a perspective +// camera, unlike the depth linearization it replaces. +vec3 view_pos(ivec2 pixel) { - float z = depth * 2.0 - 1.0; - return (2.0 * z_near * z_far) / (z_far + z_near - z * (z_far - z_near)); + ivec2 p = clamp(pixel, ivec2(0), textureSize(depth_texture, 0) - 1); + float d = texelFetch(depth_texture, p, 0).r; + vec4 ndc = vec4((vec2(p) + 0.5) * inv_tex_size * 2.0 - 1.0, d * 2.0 - 1.0, 1.0); + vec4 view = inv_projection_matrix * ndc; + return view.xyz / view.w; +} + +// Surface normal at the given pixel, from the forward differences of the reconstructed view +// position. It rings by a pixel across a depth discontinuity, which is acceptable here: the +// normal only weights the occlusion, nothing is shaded with it. +vec3 view_normal(ivec2 pixel, vec3 p) +{ + vec3 px = view_pos(pixel + ivec2(1, 0)); + vec3 py = view_pos(pixel + ivec2(0, 1)); + vec3 n = cross(px - p, py - p); + float len = length(n); + return (len > 1e-8) ? n / len : vec3(0.0, 0.0, 1.0); } void main() @@ -28,81 +49,72 @@ void main() return; } ivec2 pixel = ivec2(gl_FragCoord.xy); - float center_depth = linearize_depth(texelFetch(depth_texture, pixel, 0).r); - - // Sample normal buffer (stored as RGB in 0-1 range, convert to -1 to 1) - vec3 normal_center = texelFetch(normal_texture, pixel, 0).rgb * 2.0 - 1.0; - normal_center = normalize(normal_center); - + vec3 color = texture(color_texture, tex_coord).rgb; + + // Nothing was drawn here: occluding the background would only darken the gradient, and its + // reconstructed normal is degenerate anyway. + if (texelFetch(depth_texture, pixel, 0).r >= 0.9999) { + frag_color = vec4(color, 1.0); + return; + } + + vec3 center_pos = view_pos(pixel); + float center_depth = -center_pos.z; + vec3 normal_center = view_normal(pixel, center_pos); + // Calculate upward-facing factor (Z-up coordinate system) - float up_factor = clamp(normal_center.z * 1.5, 0.0, 1.0); - + float up_factor = clamp(dot(normal_center, up_view), 0.0, 1.0); + // Adaptive radius in pixel space int radius = int(mix(2.0, 4.0, center_depth / z_far)); // Optimized sampling pattern - const ivec2 offsets[12] = ivec2[]( + const int SAMPLE_COUNT = 12; + const ivec2 offsets[SAMPLE_COUNT] = ivec2[]( ivec2(1, 0), ivec2(-1, 0), ivec2(0, 1), ivec2(0, -1), ivec2(1, 1), ivec2(-1, 1), ivec2(1, -1), ivec2(-1, -1), ivec2(2, 0), ivec2(-2, 0), ivec2(0, 2), ivec2(0, -2) ); - float occlusion = 0.0; - int valid_samples = 0; + // Occlusion is a slope, not a depth difference: the sine of the angle a neighbour subtends + // above the centre's tangent plane. A raw difference depends on camera distance and zoom, + // so no fixed thresholds suit both a 0.2 mm layer step and a 5 mm overhang. + const float SLOPE_MIN = 0.08; // ~5 degrees, above the depth-buffer noise of a flat surface + const float SLOPE_MAX = 0.60; // ~37 degrees, a full crease - for (int i = 0; i < 12; i++) { + float occlusion = 0.0; + + for (int i = 0; i < SAMPLE_COUNT; i++) { + // No edge rejection: view_pos clamps, giving a near-zero delta and no occlusion. + // Rejecting one side only would bias the denominator against the other. ivec2 sample_pixel = pixel + offsets[i] * radius; - if (sample_pixel.x < 0 || sample_pixel.y < 0) - continue; - - float sample_depth = linearize_depth(texelFetch(depth_texture, sample_pixel, 0).r); - - // Sample normal at neighbor - vec3 normal_sample = texelFetch(normal_texture, sample_pixel, 0).rgb * 2.0 - 1.0; - - // Depth difference (positive if neighbor is closer to camera) - float depth_diff = center_depth - sample_depth; - - // Sharp depth threshold === - // Minimum depth difference to consider occlusion (ignores small variations) - float threshold_min = 0.008; // Higher = only deep valleys get darkened - float threshold_max = 0.04; // Transition range for full occlusion + vec3 delta = view_pos(sample_pixel) - center_pos; + float dist = length(delta); + // How far the neighbour rises towards the viewer out of the centre's tangent plane. A + // flat surface gives ~0 whatever its orientation, so this also subsumes the separate + // planar test the normals were compared for. + float rise = (dist > 1e-6) ? dot(delta, normal_center) / dist : 0.0; float contribution = 0.0; - if (depth_diff > threshold_min) { + if (rise > SLOPE_MIN) { // Abrupt mapping with power curve - contribution = (depth_diff - threshold_min) / (threshold_max - threshold_min); + contribution = (rise - SLOPE_MIN) / (SLOPE_MAX - SLOPE_MIN); contribution = clamp(contribution, 0.0, 1.0); contribution = pow(contribution, 2.0); // Steeper curve for sharper transition } - // Reduce occlusion on planar surfaces (similar normals) - float normal_similarity = dot(normal_center, normal_sample); - float planar_factor = smoothstep(0.75, 0.95, normal_similarity); - contribution *= (1.0 - planar_factor * 0.6); - occlusion += contribution; - valid_samples++; } - if (valid_samples > 0) { - // Calculate ambient occlusion factor with higher base intensity - float ao_factor = 1.0 - (occlusion / float(valid_samples)) * 0.6; - - // Keep bright areas clean (higher minimum for upward-facing surfaces) - float ao_min = mix(0.55, 0.85, up_factor); - ao_factor = clamp(ao_factor, ao_min, 1.0); - - // Slight brightness boost for upward-facing surfaces - float brightness_boost = 1.0 + up_factor * 0.15; - ao_factor = ao_factor * brightness_boost; - - occlusion = ao_factor; - } else { - occlusion = 1.0; - } + // Calculate ambient occlusion factor with higher base intensity + float ao_factor = 1.0 - (occlusion / float(SAMPLE_COUNT)) * 0.6; + + // Keep bright areas clean (higher minimum for upward-facing surfaces). The old 0.85 floor + // and 1.15 boost were set when up_factor came from the colour buffer and read ~0; with a + // real normal they capped a top surface at 2% darkening, which hid the AO entirely. + float ao_min = mix(0.45, 0.70, up_factor); + occlusion = clamp(ao_factor, ao_min, 1.0); - vec3 color = texture(color_texture, tex_coord).rgb; frag_color = vec4(color * occlusion, 1.0); -} \ No newline at end of file +} diff --git a/resources/web/dialog/SpeedDial/speeddial.js b/resources/web/dialog/SpeedDial/speeddial.js index c5caf0d423..03f315e39c 100644 --- a/resources/web/dialog/SpeedDial/speeddial.js +++ b/resources/web/dialog/SpeedDial/speeddial.js @@ -30,7 +30,7 @@ var USER_MODE = "simple"; var MODE_RANK = { simple: 0, advanced: 1, expert: 2, develop: 3 }; // Search ranking weights: every contiguous match must outrank every fuzzy one regardless of field, -// and title must outrank group, which outranks source. +// and title must outrank group/category, which outranks source. var SCORE_CONTIGUOUS = 100000; var SCORE_TITLE = 2000; var SCORE_GROUP = 1000; @@ -118,6 +118,18 @@ function sourceNorm(a) { a._sn = NormText(a.source || "", false); return a._sn; } +function pluginCategoryNorm(a) { + if (a._pcn === undefined) + a._pcn = a.kind === "plugin" ? NormText(T("sd_plugins", "Plugins"), false) : ""; + return a._pcn; +} +// Plugin type is searchable metadata, so typing "plugin" can find runnable plugin actions even +// when neither their capability nor plugin name contains that word. Keep both category forms. +function pluginTypeNorm(a) { + if (a._pn === undefined) + a._pn = a.kind === "plugin" ? NormText("plugin plugins", false) : ""; + return a._pn; +} // Search-only alias for the descriptive name when the title differs (e.g. "Reverse on even" vs // "Overhang reversal"). Never rendered, so no highlight ranges. function fullNorm(a) { @@ -152,7 +164,7 @@ function fieldMatchScore(norm, needle, wwRe) { // Split a query into normalized (folded+lowercased) whitespace-separated tokens. Empty for a blank // query. These drive the multi-token path: every token must match some field, but different tokens -// may match different fields (the title, the group, or the source breadcrumb). +// may match different fields (the title, group, source breadcrumb, or plugin kind). function queryTokens(query) { var norm = NormText(String(query || "").trim(), false); return norm ? norm.split(/\s+/).filter(Boolean) : []; @@ -170,14 +182,19 @@ function tokenMatch(a, token, wwRe) { var g = fieldMatchScore(groupNorm(a), token, wwRe); var s = fieldMatchScore(sourceNorm(a), token, wwRe); var f = fieldMatchScore(fullNorm(a), token, wwRe); - if (!t && !g && !s && !f) return null; + var p = fieldMatchScore(pluginCategoryNorm(a), token, wwRe); + var typeMatch = fieldMatchScore(pluginTypeNorm(a), token, wwRe); + if (!t && !g && !s && !f && !p && !typeMatch) return null; var score = Math.max( t ? (t.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_TITLE + t.score : -Infinity, g ? (g.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + g.score : -Infinity, s ? (s.contiguous ? SCORE_CONTIGUOUS : 0) + s.score : -Infinity, - f ? (f.contiguous ? SCORE_CONTIGUOUS : 0) + f.score : -Infinity + f ? (f.contiguous ? SCORE_CONTIGUOUS : 0) + f.score : -Infinity, + p ? (p.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + p.score : -Infinity, + typeMatch ? (typeMatch.contiguous ? SCORE_CONTIGUOUS : 0) + SCORE_GROUP + typeMatch.score : -Infinity ); - return { score: score, title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null }; + return { score: score, title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null, + plugin: p ? p.ranges : null }; } // Merge per-field token ranges into sorted, coalesced ranges for highlighting. Overlapping or adjacent @@ -201,8 +218,8 @@ function mergeRanges(ranges) { } // Combine per-field scores into one value, or null when nothing matched. -// Ranking: contiguous > fuzzy, then title > group > source/full alias, then start/gaps. -function scoreFields(t, g, s, f) { +// Ranking: contiguous > fuzzy, then title > group/category > source/full alias, then start/gaps. +function scoreFields(t, g, s, f, p, typeMatch) { var best = null; function consider(m, weight) { if (!m) return; @@ -213,6 +230,8 @@ function scoreFields(t, g, s, f) { consider(g, SCORE_GROUP); consider(s, 0); consider(f, 0); + consider(p, SCORE_GROUP); + consider(typeMatch, SCORE_GROUP); return best; } @@ -226,7 +245,8 @@ function scoreFields(t, g, s, f) { // - tokens: every whitespace-separated word must match SOME field, but different words may match // different fields. This is what lets "speed acceleration inner" find "Inner wall" whose path is // "Process : Speed : Acceleration" (title + source breadcrumb together). -// full_label is searchable too but never highlighted, since it is not rendered. +// full_label and canonical plugin kind are searchable aliases. The visible category is also searchable +// so its own match can be highlighted in plugin rows. // A phrase match always outranks a distributed token match. function searchActions(actions, query) { var q = (query || "").trim(); @@ -251,26 +271,31 @@ function searchActions(actions, query) { var g = fieldMatchScore(groupNorm(a), searchNeedle, wwRe); var s = fieldMatchScore(sourceNorm(a), searchNeedle, wwRe); var f = fieldMatchScore(fullNorm(a), searchNeedle, wwRe); - var phrase = scoreFields(t, g, s, f); + var p = fieldMatchScore(pluginCategoryNorm(a), searchNeedle, wwRe); + var typeMatch = fieldMatchScore(pluginTypeNorm(a), searchNeedle, wwRe); + var phrase = scoreFields(t, g, s, f, p, typeMatch); var score, ranges; if (phrase !== null) { score = phrase + SCORE_PHRASE; - ranges = { title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null }; + ranges = { title: t ? t.ranges : null, group: g ? g.ranges : null, source: s ? s.ranges : null, + plugin: p ? p.ranges : null }; } else { // Require every token; a token that matches nothing drops the action immediately. Ranges // from all matching tokens are merged per field so each matched word highlights. - var sum = 0, titleR = null, groupR = null, sourceR = null, all = true; - for (var k = 0; k < searchTokens.length; k++) { - var m = tokenMatch(a, searchTokens[k], searchTokenRes[k]); + var sum = 0, titleR = null, groupR = null, sourceR = null, pluginR = null, all = true; + for (var tokenIndex = 0; tokenIndex < searchTokens.length; tokenIndex++) { + var m = tokenMatch(a, searchTokens[tokenIndex], searchTokenRes[tokenIndex]); if (!m) { all = false; break; } sum += m.score; if (m.title) (titleR || (titleR = [])).push(m.title); if (m.group) (groupR || (groupR = [])).push(m.group); if (m.source) (sourceR || (sourceR = [])).push(m.source); + if (m.plugin) (pluginR || (pluginR = [])).push(m.plugin); } if (!all) continue; score = sum; - ranges = { title: mergeRanges(titleR), group: mergeRanges(groupR), source: mergeRanges(sourceR) }; + ranges = { title: mergeRanges(titleR), group: mergeRanges(groupR), source: mergeRanges(sourceR), + plugin: mergeRanges(pluginR) }; } // Ranges are per-field against the ACTUAL text drawn: title for the row-name, and group (or // source when group is empty) for the eyebrow - so highlight offsets stay aligned to the label. @@ -278,6 +303,7 @@ function searchActions(actions, query) { title: ranges.title, group: ranges.group, source: ranges.source, + plugin: ranges.plugin, useEyebrowGroup: !!(a.group) }; scored.push({ a: a, s: score }); @@ -390,7 +416,7 @@ function favDigitFromEvent(e) { function resultCountText(total, shown, query) { return (query || "").trim() ? - T("sd_result_count", "Showing %s of %s actions", shown, total) : + T("sd_result_count", "Showing %s actions", shown) : T("sd_result_count_all", "%s actions", total); } @@ -461,6 +487,12 @@ function actionCategory(a) { return cat || T("sd_other", "Other"); } +function actionEyebrow(a, typedQuery, isRecent) { + if (a && a.kind === "plugin" && (String(typedQuery || "").trim() || isRecent)) + return T("sd_plugins", "Plugins"); + return (a && (a.group || a.source)) || ""; +} + // Stable-bucket actions by category, then order the groups alphabetically. Within a group the incoming // (frecency) order is kept. Pure so the node-vm test can exercise grouping. function groupActions(list) { @@ -711,7 +743,7 @@ window.HandleStudio = function (payload) { builtKey = ""; if (qEl) { qEl.value = ""; - qEl.placeholder = T("sd_search_n", "Search %s actions", ACTIONS.length); + qEl.placeholder = T("sd_search", "Search actions"); syncClearButton(); } render({ resize: true, resetScroll: true }); @@ -931,12 +963,14 @@ function beginRow(item, i, mono, ariaLabel) { function renderActionRow(a, i) { var on = FAVS.indexOf(a.id) !== -1; var shell = beginRow(a, i, false, actionLabel(a, ACTIONS)); - var mi = matchIndex[a.id]; - // The eyebrow shows group when present, else source. Highlight with the ranges of whichever of the - // two the eyebrow actually renders (so a "Recent Projects"/"Object" header match lights up like a - // setting path does - the offsets are computed against the same string we are marking). - var eyebrow = a.group || a.source; - var eyebrowMatch = mi ? (mi.useEyebrowGroup ? mi.group : mi.source) : null; + var typedQuery = String(query || "").trim(); + var isRecent = !typedQuery && i < RECENTS.length && RECENTS[i].id === a.id; + var mi = typedQuery ? matchIndex[a.id] : null; + // Plugin search/recent rows show their category; other rows show their group or source breadcrumb. + // Use match ranges from the visible field so category and breadcrumb highlights stay aligned. + var showPluginCategory = a.kind === "plugin" && (typedQuery || isRecent); + var eyebrow = actionEyebrow(a, query, isRecent); + var eyebrowMatch = mi ? (showPluginCategory ? mi.plugin : (mi.useEyebrowGroup ? mi.group : mi.source)) : null; shell.left.insertBefore(markedText("row-eyebrow", eyebrow, eyebrowMatch), shell.line); shell.line.appendChild(markedText("row-name", a.title, mi ? mi.title : null)); var badge = modeBadge(a, USER_MODE); @@ -1376,7 +1410,7 @@ function exitPhase() { // It survives a second-phase exit (which never goes through exitPhase from the commands view), // so without a reset the cached empty-query key would skip the rebuild and leave stale content. builtKey = ""; - qEl.placeholder = T("sd_search_n", "Search %s actions", ACTIONS.length); + qEl.placeholder = T("sd_search", "Search actions"); render({ resize: true, resetScroll: true }); qEl.focus(); } diff --git a/resources/web/dialog/SpeedDial/speeddial.test.js b/resources/web/dialog/SpeedDial/speeddial.test.js index 03099df91b..1fda833801 100644 --- a/resources/web/dialog/SpeedDial/speeddial.test.js +++ b/resources/web/dialog/SpeedDial/speeddial.test.js @@ -82,6 +82,20 @@ assert.equal(ctx.searchActions(pool, "layer").length >= 2, true, assert.equal(ctx.searchActions(pool, "surface")[0].id, "c2", "a later-but-precise match still ranks by relevance, not by pool type"); +const pluginPool = [ + { id: "plugin-action", title: "Optimize G-code", source: "Gcode Optimizer", group: "", kind: "plugin" }, + { id: "command-action", title: "Open Preferences", source: "OrcaSlicer", group: "Commands", kind: "command" } +]; +assert.deepEqual(ctx.searchActions(pluginPool, "plugin").map(function (a) { return a.id; }), ["plugin-action"], + "the plugin kind makes runnable plugin actions searchable by plugin"); +assert.deepEqual(ctx.searchActions(pluginPool, "plugins").map(function (a) { return a.id; }), ["plugin-action"], + "the plural Plugins category also finds plugin actions"); +ctx.searchActions(pluginPool, "plugins"); +assert.deepEqual(ctx.matchIndex["plugin-action"].plugin, [[0, 7]], + "a category match highlights the visible Plugins label"); +assert.deepEqual(ctx.searchActions(pluginPool, "plugin optimize").map(function (a) { return a.id; }), ["plugin-action"], + "plugin kind can match one token while the action title matches another"); + // A perfect match (the needle as one contiguous run) outranks a fuzzy match of the same field - and a // contiguous GROUP/header hit ("Recent Projects") beats a scattered fuzzy TITLE hit ("Retraction Length"), // which is what the old flat title-bonus ranking got backwards. @@ -188,6 +202,12 @@ assert.equal(ctx.actionCategory({ id: "s", group: "", source: "Filament : Coolin "a Filament setting groups under Filament"); assert.equal(ctx.actionCategory({ id: "plugin_script_action:Foo:bar.py", group: "", source: "Gcode Optimizer", kind: "plugin" }), "Plugins", "every plugin shares one Plugins header"); +assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, "plugin"), "Plugins", + "typed results show only the Plugins category"); +assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, "", true), "Plugins", + "recent plugin actions show only the Plugins category"); +assert.equal(ctx.actionEyebrow({ group: "", source: "Gcode Optimizer", kind: "plugin" }, ""), "Gcode Optimizer", + "the unfiltered plugin section keeps the source name on non-recent rows"); assert.equal(ctx.actionCategory({ id: "x", group: "", source: "", kind: "command" }), "Other", "a category-less action falls back to Other"); @@ -436,4 +456,9 @@ assert.equal(ctx.stateFromPayload({}).tooltipExpanded, true, "expansion defaults assert.equal(ctx.stateFromPayload({ tooltip_expanded: false }).tooltipExpanded, false, "a collapsed payload is honored"); assert.equal(ctx.stateFromPayload({ tooltip_expanded: true }).tooltipExpanded, true, "an expanded payload is honored"); +// resultCountText: a search counts the shown matches only ("Showing N actions"); the total is used +// solely for the empty-query count. +assert.equal(ctx.resultCountText(100, 3, "lay"), "Showing 3 actions", "a search reports the shown match count only"); +assert.equal(ctx.resultCountText(100, 100, ""), "100 actions", "an empty query reports the total"); + console.log("ok"); diff --git a/resources/web/dialog/PluginWebDialog/blank.html b/resources/web/dialog/WebDialog/blank.html similarity index 76% rename from resources/web/dialog/PluginWebDialog/blank.html rename to resources/web/dialog/WebDialog/blank.html index 5047c5ba7b..928d754fab 100644 --- a/resources/web/dialog/PluginWebDialog/blank.html +++ b/resources/web/dialog/WebDialog/blank.html @@ -1,5 +1,5 @@ - diff --git a/resources/web/model/index.html b/resources/web/model/index.html index 72feda0f5f..86776b6577 100644 --- a/resources/web/model/index.html +++ b/resources/web/model/index.html @@ -7,7 +7,6 @@ - @@ -18,6 +17,7 @@ + diff --git a/sandboxes/orca_dock_panel_plugin_any.py b/sandboxes/orca_dock_panel_plugin_any.py new file mode 100644 index 0000000000..514f6c3068 --- /dev/null +++ b/sandboxes/orca_dock_panel_plugin_any.py @@ -0,0 +1,146 @@ +# /// script +# requires-python = ">=3.12" +# +# [tool.orcaslicer.plugin] +# name = "Dock Panel Demo" +# description = "Opens a dockable panel beside the 3D view that lists the objects on the plate." +# author = "OrcaSlicer" +# version = "0.0.1" +# /// +"""Dock Panel Demo -- orca.host.ui.create_dock_panel(). + +Run it from the Plugins dialog. It opens an HTML panel docked on the right of the 3D view, in the +same dock area as the sidebar. Drag its caption to dock it on another side (or float it, where the +platform allows), hide it from the page and run the plugin again to bring it back, or close it with +its close button or from the page. + + page --orca.postMessage({command: 'refresh'})--> plugin.on_message() + page --orca.postMessage({command: 'hide'})--> plugin.on_message() -> panel.hide() + page --orca.close()--> panel closes, plugin.on_close() + plugin --panel.post({command: 'objects', ...})--> page (orca.onMessage) +""" +import orca + +PAGE = """ + + +

Objects on the plate

+

Docked beside the 3D view. Drag the caption to move it.

+ +
+ + + +
+ + + + +
NamePartsCopies
+

Waiting for the plugin...

+ + +""" + + +def plate_objects(): + try: + model = orca.host.model() + except RuntimeError as error: + return {"command": "objects", "error": str(error)} + return { + "command": "objects", + "objects": [ + {"name": obj.name or "(unnamed)", "volumes": obj.volume_count(), "instances": obj.instance_count()} + for obj in model.objects() + ], + } + + +class DockPanelDemo(orca.script.ScriptPluginCapabilityBase): + panel = None + + def get_name(self): + return "Dock Panel Demo" + + def execute(self): + # The capability instance lives as long as the plugin, so a second run finds the open panel. + if self.panel is not None and self.panel.is_open(): + self.panel.show() + return orca.ExecutionResult.success("Dock Panel Demo is already open.") + self.panel = orca.host.ui.create_dock_panel( + html=PAGE, + title="Dock Panel Demo", + width=320, + height=480, + on_message=self.on_message, + on_close=self.on_close, + dock="right", + ) + return orca.ExecutionResult.success("Dock Panel Demo opened.") + + # Called on the UI thread when the page posts. + def on_message(self, message): + command = (message or {}).get("command") + if command == "refresh": + self.panel.post(plate_objects()) + elif command == "hide": + self.panel.hide() + + def on_close(self): + self.panel = None + + +@orca.plugin +class DockPanelDemoPlugin(orca.base): + def register_capabilities(self): + orca.register_capability(DockPanelDemo) diff --git a/scripts/orca_profile_tool.py b/scripts/orca_profile_tool.py index 100e7cba3f..f7f622c8c0 100755 --- a/scripts/orca_profile_tool.py +++ b/scripts/orca_profile_tool.py @@ -6,6 +6,7 @@ usage: python scripts/orca_profile_tool.py [options] commands: check validate the whole tree -- what CI runs + fix-variant resize the variant arrays check rejects generate-id write the filament_id / setting_id each profile's identity implies normalize rewrite profile files into their canonical shape trim delete profile files no .json list references @@ -89,6 +90,7 @@ parent in the OFL map. filament_vendor / filament_type resolve the same way. """ import argparse +import functools import json import os import posixpath @@ -138,7 +140,13 @@ PROFILE_SUBDIRS = ("filament", "process", "machine") PROFILE_TYPES = ("machine_model", "process", "filament", "machine") # Data files that sit under a vendor bundle but are not presets: no name, no type. -NON_PROFILE_FILES = {"filaments_color_codes.json", "cli_config.json"} +NON_PROFILE_FILES = { + "filaments_color_codes.json", + "cli_config.json", + "filament_id_map.json", + "filament_name_map.json", + "support_recommended_params.json", +} # Mirror PrintConfigDef::handle_legacy's ignore set in PrintConfig.cpp; a test # checks parity. Used by normalize and check. Active options and @@ -173,6 +181,99 @@ VECTOR_KEYS = { "filament_type", } +PRINT_CONFIG_CPP = os.path.normpath( + os.path.join(SCRIPTS_DIR, "..", "src", "libslic3r", "PrintConfig.cpp")) + + +@functools.lru_cache(maxsize=None) +def _variant_scheme(): + """Per config preset type: the key listing the preset's own variants, and the + stride of every key sized by it. + + Read from the four variant key sets in PrintConfig.cpp, the std::set + initializers DynamicPrintConfig::get_parameter_size sizes by, so membership is + the engine's own and not guessable from names. Each holds one value per variant; + printer_options_with_variant_2, the machine_max_* limits, holds a (normal, + silent) pair per variant, stride 2. + """ + with open(PRINT_CONFIG_CPP, encoding="utf-8") as f: + source = f.read() + + def members(name): + match = re.search(r"std::set\s+" + name + r"\s*=\s*\{(.*?)\};", + source, re.DOTALL) + if match is None: + raise RuntimeError(f"{PRINT_CONFIG_CPP} no longer defines {name}") + # An initializer can carry a commented-out entry (filament_extruder_id). + body = re.sub(r"//[^\n]*|/\*.*?\*/", "", match.group(1), flags=re.DOTALL) + return sorted(set(re.findall(r'"([^"\n]+)"', body))) + + return { + "machine": ("printer_extruder_variant", { + **dict.fromkeys(members("printer_options_with_variant_1"), 1), + **dict.fromkeys(members("printer_options_with_variant_2"), 2)}), + "process": ("print_extruder_variant", + dict.fromkeys(members("print_options_with_variant"), 1)), + "filament": ("filament_extruder_variant", + dict.fromkeys(members("filament_options_with_variant"), 1)), + } + + +@functools.lru_cache(maxsize=None) +def _variant_names(): + """The parts a variant string is built from, read from PrintConfig.cpp. + + A variant is selected by exact string compare of " ", so what is legal is the two enum maps the engine builds that string from, + not the list of strings some profile happens to ship. Returns (extruder types, + writable volume types, variant-name rewrites, extruder_type rewrites): the volume + types minus RUNTIME_VOLUME_TYPES, and the spellings PrintConfigDef::handle_legacy + rewrites in the six variant keys. The loader still accepts such a spelling, but a + profile must write the enum name, so the rewrite only names that name in the error; + it is read rather than restated because it belongs to the engine too. + """ + with open(PRINT_CONFIG_CPP, encoding="utf-8") as f: + source = f.read() + + def enum_map(name): + match = re.search(r"t_config_enum_values\s+" + name + r"\s*=\s*\{(.*?)\};", + source, re.DOTALL) + if match is None: + raise RuntimeError(f"{PRINT_CONFIG_CPP} no longer defines {name}") + body = re.sub(r"//[^\n]*|/\*.*?\*/", "", match.group(1), flags=re.DOTALL) + return set(re.findall(r'"([^"\n]+)"', body)) + + def rewrites(anchor): + """The (old, new) ReplaceString pairs of handle_legacy's branch for one key. + + An absent branch means the loader rewrites nothing, which is a defined answer + rather than a broken parse: every legacy name is then reported as unknown. + """ + match = re.search(r'opt_key == "' + anchor + r'"\s*\)\s*\{(.*?)\}', + source, re.DOTALL) + return ({} if match is None else + dict(re.findall(r'ReplaceString\(value,\s*"([^"]+)",\s*"([^"]+)"\)', + match.group(1)))) + + return (enum_map("s_keys_map_ExtruderType"), + enum_map("s_keys_map_NozzleVolumeType") - RUNTIME_VOLUME_TYPES, + rewrites("extruder_variant_list"), + rewrites("extruder_type")) + + +# What a preset that writes no variant layout takes: the default extruder_type and +# nozzle volume type (PrintConfig.cpp defaults for extruder_type and +# default_nozzle_volume_type), one such variant per extruder on a machine +# (extend_extruder_variant) and a single one on a process or filament. +DEFAULT_EXTRUDER_TYPE = "Direct Drive" +DEFAULT_NOZZLE_VOLUME_TYPE = "Standard" +DEFAULT_VARIANT = f"{DEFAULT_EXTRUDER_TYPE} {DEFAULT_NOZZLE_VOLUME_TYPE}" + +# A nozzle volume type the engine computes for a hybrid extruder at runtime, and no +# profile ever writes: s_keys_map_NozzleVolumeType carries it for the several +# sub-nozzles of one extruder, which no single variant string can name. +RUNTIME_VOLUME_TYPES = {"Hybrid"} + OF_ID_RE = re.compile(r"^OF[0-9A-Za-z]{6}$") # Filament name = preset base name: strip the first "@..." suffix. The space before # "@" is optional because names like "Afinia PLA@HS" exist. @@ -431,6 +532,7 @@ def resolve_filament_field(name, field, filaments, ofl_filaments, seen=None, in_ the same hop semantics as resolve_filament_id: own value, else walk `inherits` in the vendor map with OFL base-bundle fallback. Values are list options — the first element counts; "" when the chain never defines one. + Templates pulled in by `include` are not consulted: none states either field. """ if seen is None: seen = set() @@ -818,6 +920,55 @@ def check_setting_id_uniqueness(profiles_dir): return errors +def check_machine_model_name_uniqueness(profiles_dir): + """No two bundles may declare a machine_model with the same name. + + A machine_model name is the key the whole tree resolves a printer type by: + Preset::get_printer_type (and get_current_printer_type) walk every vendor's + models and return the model_id of the first whose name equals the preset's + printer_model, so two models sharing a name make that lookup depend on vendor + order. The name is also what the Add Printer list shows, so a duplicate + renders the same printer twice. + + Unlike preset names, which are per bundle - base profiles share one name + across dozens of bundles by design - a machine_model name is global. A vendor + copying another vendor's model (the Custom "Generic Klipper Printer" being the + usual source) is the common way this happens. + + Cross-vendor by nature, so it always runs over the whole tree, never narrowed + by --vendor. Returns the error count. + """ + errors = 0 + owners = defaultdict(list) # model name -> [relative path] + for vendor in list_profile_dirs(profiles_dir): + for path, _sub in iter_profile_files(os.path.join(profiles_dir, vendor)): + if os.path.basename(path) in NON_PROFILE_FILES: + continue + try: + data = load_json(path) + except (ValueError, OSError): + # Parse failures are reported by the checks that walk the same + # files; reporting them here too would double-count. + continue + if not isinstance(data, dict) or data.get("type") != "machine_model": + continue + name = data.get("name") + if name: + owners[name].append( + os.path.relpath(path, profiles_dir).replace(os.sep, "/")) + + for name, paths in sorted(owners.items()): + if len(paths) < 2: + continue + errors += 1 + print_error( + f'machine_model name "{name}" is declared by {len(paths)} bundles ' + f'({", ".join(sorted(paths))}); a machine model name is global, so the ' + f"printer type resolves to whichever bundle is seen first and the Add " + f"Printer list shows it twice - rename or delete the duplicate") + return errors + + # --------------------------------------------------------------------------- # Per-vendor validation # --------------------------------------------------------------------------- @@ -832,8 +983,8 @@ def _vendor_json_files(vendor_path): def check_preset_name_uniqueness(profiles_dir, vendor): """No two profiles in a bundle may share a type and a name, indexed or not. - The loader resolves "inherits" through a per-type map of the bundle's profiles - (PresetBundle.cpp load_subfiles), and std::map::emplace keeps the first + The loader resolves "inherits" and "include" through per-type maps of the bundle's + profiles (PresetBundle.cpp load_subfiles), and std::map::emplace keeps the first insertion: a second file claiming the name is silently dropped, and which one wins is nothing but index order. An unindexed twin counts too - it is one sub_path edit away from deciding that silently. @@ -1192,6 +1343,482 @@ def check_vector_type_keys(profiles_dir, vendor): return error_count +@functools.lru_cache(maxsize=None) +def load_vendor_configs(profiles_dir, vendor): + """name -> (tree-relative file, data) per config preset type, from the bundle's + index lists - the per-kind maps the loader resolves inherits and include in. + + Cached because every vendor's filaments may reach OrcaFilamentLibrary. Unreadable + files are check_name_consistency's to report; when two indexed files claim one + name the first wins, as std::map::emplace keeps the first insertion. + """ + configs = {sub: {} for sub in PROFILE_SUBDIRS} + try: + index = load_json(os.path.join(str(profiles_dir), vendor + ".json")) + except (OSError, ValueError): + return configs + for section in PROFILE_TYPES: + for entry in index.get(section + "_list", []): + sub_path = entry.get("sub_path", "") + try: + data = load_json(os.path.join(str(profiles_dir), vendor, sub_path)) + except (OSError, ValueError): + continue + if isinstance(data, dict) and data.get("type") in configs and data.get("name"): + configs[data["type"]].setdefault(data["name"], (f"{vendor}/{sub_path}", data)) + return configs + + +def compose_config(name, presets, ofl_presets, cache, in_ofl=False, seen=frozenset()): + """A preset's config as the loader composes it: the parent's composed config, + then each `include` in the order listed, then its own keys - later layers win. + + Each key maps to (value, path): the value as the winning file wrote it, width + included, and the tree-relative files it passes through on the way to this + preset, from that file down to this one. `inherits` resolves in the bundle + first, then in OrcaFilamentLibrary (filaments only) and stays there once it + enters; `include` never leaves the includer's bundle. A name that resolves to + nothing, or a cycle, contributes nothing - the loader's own error paths leave + the preset without it too. + """ + if (in_ofl, name) in cache: + return cache[(in_ofl, name)] + bundle = ofl_presets if in_ofl else presets + if name not in bundle and not in_ofl and name in ofl_presets: + bundle, in_ofl = ofl_presets, True + if name not in bundle or name in seen: + return {} + seen = seen | {name} + rel, data = bundle[name] + config = {} + if data.get("inherits"): + config.update( + compose_config(data["inherits"], presets, ofl_presets, cache, in_ofl, seen)) + include = data.get("include") or [] + for included in ([include] if isinstance(include, str) else include): + if included in bundle: + config.update(compose_config(included, presets, ofl_presets, cache, in_ofl, seen)) + config = {key: (value, path + (rel,)) for key, (value, path) in config.items()} + config.update((key, (value, (rel,))) for key, value in data.items()) + cache[(in_ofl, name)] = config + return config + + +def _as_list(value): + return value if isinstance(value, list) else [value] + + +def _per_extruder(values, i): + """Entry i of a per-extruder vector, padded the way the loader pads: by its first value.""" + return values[i] if i < len(values) else values[0] + + +def _check_printer_layout(rel, config): + """A machine's extruder_variant_list, printer_extruder_variant, printer_extruder_id, + extruder_type and default_nozzle_volume_type agree with each other, the loader's + defaults standing in for whatever the composed config leaves out. + + A machine that writes none of the three list keys takes one default variant + "Direct Drive Standard" per extruder, so there is nothing to check. Otherwise + printer_extruder_variant is extruder_variant_list flattened extruder-major and + printer_extruder_id gives each of its entries its 1-based extruder (extruder 1 + everywhere when absent); every variant starts with its extruder's extruder_type + ("Direct Drive" when absent); the default_nozzle_volume_type ("Standard" when + absent) is one the extruder lists. A list without the pair leaves the loader on + the default single variant; a pair without the list gives the sidebar no variant + switch, and with single_extruder_multi_material off the loader replaces it with + one default variant per extruder. Returns (errors, warnings). + """ + menu = config.get("extruder_variant_list") + variant = config.get("printer_extruder_variant") + if menu is None and variant is None: + return 0, 0 + errors = warnings = 0 + extruders = len(_as_list(config.get("nozzle_diameter", [""]))) + types = _as_list(config.get("extruder_type", [DEFAULT_EXTRUDER_TYPE])) + volume_types = _as_list(config.get("default_nozzle_volume_type", [DEFAULT_NOZZLE_VOLUME_TYPE])) + semm_off = str(_as_list(config.get("single_extruder_multi_material", ["1"]))[0]) \ + .lower() in ("0", "false") + flat, ids = [], [] + if menu is not None: + menu = _as_list(menu) + if len(menu) != extruders: + print_error(f"{rel}: extruder_variant_list has {len(menu)} entries for {extruders} " + f"extruder(s) (nozzle_diameter); it holds one entry per extruder") + errors += 1 + for i, entry in enumerate(menu): + variants = entry.split(",") + flat += variants + ids += [str(i + 1)] * len(variants) + extruder_type = _per_extruder(types, i) + if not all(v.startswith(extruder_type + " ") for v in variants): + print_error(f'{rel}: extruder_variant_list entry {i + 1} "{entry}" holds a ' + f"variant that does not start with extruder {i + 1}'s " + f'extruder_type "{extruder_type}"') + errors += 1 + if f"{extruder_type} {_per_extruder(volume_types, i)}" not in variants: + print_error(f'{rel}: default_nozzle_volume_type "{_per_extruder(volume_types, i)}" is ' + f'not a nozzle volume type extruder {i + 1} lists ("{entry}")') + errors += 1 + if variant is not None: + variant = _as_list(variant) + written_ids = config.get("printer_extruder_id") + pair_ids = ["1"] * len(variant) if written_ids is None else _as_list(written_ids) + if len(pair_ids) != len(variant): + print_error(f"{rel}: printer_extruder_id has {len(pair_ids)} entries for the " + f"{len(variant)} entries of printer_extruder_variant") + errors += 1 + if menu is not None and variant is not None: + if variant != flat: + print_error(f"{rel}: printer_extruder_variant {json.dumps(variant)} is not " + f"extruder_variant_list flattened extruder-major {json.dumps(flat)}") + errors += 1 + elif pair_ids != ids: + print_error(f"{rel}: printer_extruder_id {json.dumps(pair_ids)}" + f"{' (absent, so extruder 1 everywhere)' if written_ids is None else ''} " + f"does not give each entry of printer_extruder_variant its 1-based " + f"extruder {json.dumps(ids)}") + errors += 1 + elif menu is not None: + if len(flat) > 1: + print_error(f"{rel}: extruder_variant_list offers {len(flat)} variants but the " + f"preset writes no printer_extruder_variant/printer_extruder_id, so the " + f'loader sizes every variant array to the single default variant ' + f'"{DEFAULT_VARIANT}" and no other variant has a value; write the pair') + errors += 1 + else: + crowded = [i for i in dict.fromkeys(pair_ids) if pair_ids.count(i) > 1] + if crowded: + print_error(f"{rel}: printer_extruder_variant lists several variants for extruder " + f"{crowded[0]} but the preset writes no extruder_variant_list, so the " + f"sidebar offers no variant switch and the extra variants are unreachable") + errors += 1 + elif semm_off and variant != [DEFAULT_VARIANT] * extruders: + print_warning(f"{rel}: with single_extruder_multi_material off the loader replaces " + f"printer_extruder_variant {json.dumps(variant)} by one " + f'"{DEFAULT_VARIANT}" per extruder, because extruder_variant_list is ' + f"absent; write the list or drop the pair") + warnings += 1 + return errors, warnings + + +def _variant_length(ptype, config): + """(variant length, reason) of a config as compose_config gives it, after + inherits and include. + + The variant length is the length of the preset's *_extruder_variant list. A + machine without one has the variants its extruder_variant_list offers, and + without that list one default "Direct Drive Standard" variant per extruder + (len(nozzle_diameter)) - the list's default in extend_extruder_variant. A process + or filament without its list has the single default variant. The reason says + which of these gave the length, and is empty when the list is written. + """ + list_key = _variant_scheme()[ptype][0] + if list_key in config: + return len(_as_list(config[list_key][0])), "" + if ptype != "machine": + return 1, f"no {list_key}, so the single default variant" + if "extruder_variant_list" in config: + menu = _as_list(config["extruder_variant_list"][0]) + return (sum(len(entry.split(",")) for entry in menu), + f"no {list_key}, so the variants extruder_variant_list offers") + extruders = len(_as_list(config["nozzle_diameter"][0])) if "nozzle_diameter" in config else 1 + return extruders, f"no {list_key}, so one default variant per extruder" + + +def _variant_presets(profiles_dir, vendor): + """Yield (ptype, rel, data, config, variant length, reason) for every machine, + process and filament preset of the bundle, bases included: data as its file + holds it, config as compose_config gives it, and the variant length and reason + as _variant_length does. + """ + presets = load_vendor_configs(profiles_dir, vendor) + library = {} if vendor == OFL else load_vendor_configs(profiles_dir, OFL)["filament"] + for ptype in _variant_scheme(): + ofl_presets = library if ptype == "filament" else {} + cache = {} + for name, (rel, data) in sorted(presets[ptype].items(), key=lambda item: item[1][0]): + config = compose_config(name, presets[ptype], ofl_presets, cache) + yield (ptype, rel, data, config, *_variant_length(ptype, config)) + + +def indexed_sub_paths(profiles_dir, vendor): + """The sub_paths a bundle's index lists, normalized, or None with no index. + + The loader reads what .json references and nothing else, so a file no list + names never loads and its contents are not worth judging; "filament/./X.json" + names the same file as "filament/X.json". A bundle with no readable index is + check_name_consistency's to report. Returns a set of sub_paths, or None. + """ + try: + library = load_json(os.path.join(profiles_dir, vendor + ".json")) + except (ValueError, OSError): + return None + listed = set() + for section in PROFILE_TYPES: + for entry in library.get(section + "_list", []): + if entry.get("sub_path"): + listed.add(posixpath.normpath(entry["sub_path"].replace("\\", "/"))) + return listed + + +def _variant_entries(key, value): + """(where, variant string) of every entry of a variant list key, as the loader + reads it: extruder_variant_list holds one ","-joined menu per extruder, the other + three one variant per array entry.""" + if key == "extruder_variant_list": + return [(f"extruder {i}", variant) + for i, entry in enumerate(_as_list(value), 1) + for variant in str(entry).split(",")] + return [(f"entry {i}", str(variant)) + for i, variant in enumerate(_as_list(value), 1)] + + +def _check_variant_string(rel, key, where, variant): + """Report one variant string that is not " " + in the engine's enum names. Returns the error count, 0 or 1. + + Legality is the two enum maps _variant_names reads, in every bundle: a variant + outside them is dead - nothing selects it, nothing rejects it, and it still counts + toward the variant length every array is sized by, so the values tuned for it + silently never reach the G-code. A legacy name the loader rewrites in these keys + is an error too, naming the enum name to write instead. + """ + extruder_types, volume_types, legacy, _extruder_legacy = _variant_names() + + if not variant: + print_error(f"{rel}: {key} {where} is empty; every entry names one variant, " + f'" "') + return 1 + # Longest first, so an extruder type that is a prefix of another cannot win. + extruder = next((t for t in sorted(extruder_types, key=len, reverse=True) + if variant.startswith(t + " ")), None) + if extruder is None: + # "DirectDrive" is rewritten in extruder_type alone, so a variant string + # carrying it is dead. + print_error(f'{rel}: {key} {where} holds "{variant}", which no extruder can ' + f"select: it does not start with an extruder type the enum has " + f'({", ".join(sorted(extruder_types))}); a variant is ' + f'" "') + return 1 + volume = variant[len(extruder) + 1:] + if volume in volume_types: + return 0 + if volume in legacy: + print_error(f'{rel}: {key} {where} holds the legacy variant "{variant}"; the ' + f'loader still rewrites "{volume}" to "{legacy[volume]}", but a ' + f'profile writes the enum name: "{extruder} {legacy[volume]}"') + elif volume in RUNTIME_VOLUME_TYPES: + print_error(f'{rel}: {key} {where} holds "{variant}", which no extruder can ' + f"select: Hybrid names the sub-nozzles of one hybrid extruder at " + f"runtime, never a nozzle volume type a profile writes") + else: + print_error(f'{rel}: {key} {where} holds "{variant}", which no extruder can ' + f'select: "{volume}" is not a nozzle volume type the enum has ' + f'({", ".join(sorted(volume_types))}), so nothing selects the variant ' + f"and the values tuned for it never reach the G-code") + return 1 + + +def _variant_repeats(data): + """One message per variant a preset's own lists name twice. + + The lookup returns the first equal string, so a repeat is a variant nothing + selects, and the value written beside it sits at an index no extruder reads. A + process's variant is the (extruder id, variant) pair, so one string on two + extruders is two pairs rather than a repeat; with print_extruder_id absent or + short every pair reads as extruder 1, which check_variant_arrays warns about once + per preset instead. + """ + messages = [] + if "filament_extruder_variant" in data: + variants = [str(v) for v in _as_list(data["filament_extruder_variant"])] + messages += [ + f'filament_extruder_variant lists "{v}" {variants.count(v)} times; a ' + f"filament's variants are matched by exact string, so the repeat is a " + f"variant nothing selects and its value sits at an index no extruder reads" + for v in sorted({v for v in variants if variants.count(v) > 1})] + if "extruder_variant_list" in data: + for i, entry in enumerate(_as_list(data["extruder_variant_list"]), 1): + variants = str(entry).split(",") + messages += [ + f'extruder_variant_list extruder {i} lists "{v}" ' + f"{variants.count(v)} times; the sidebar offers it once, so the repeat " + f"is a variant nothing selects and the arrays hold a value no extruder " + f"reads" + for v in sorted({v for v in variants if variants.count(v) > 1})] + if "print_extruder_variant" in data and "print_extruder_id" in data: + ids = _as_list(data["print_extruder_id"]) + variants = _as_list(data["print_extruder_variant"]) + if len(ids) == len(variants): + pairs = [(str(i), str(v)) for i, v in zip(ids, variants)] + messages += [ + f'print_extruder_variant lists the pair (extruder {i}, "{v}") ' + f"{pairs.count((i, v))} times; a variant is found by that pair, so the " + f"repeat is unreachable" + for i, v in sorted({p for p in pairs if pairs.count(p) > 1})] + return messages + + +def _check_variant_seed(rel, option, value, allowed, legacy, runtime=frozenset()): + """Report the values of an enum option a variant string is composed from. + + extruder_type and the nozzle volume type (nozzle_volume_type, seeded by + default_nozzle_volume_type) are the two halves of every variant string, and all + three are enum options: an unknown value fails the validator's load of the whole + bundle, while the app silently loads the option's default instead, which is worth + naming precisely here. A legacy name the loader rewrites, and a name in `runtime` + the engine computes for itself, are errors too. Returns the error count. + """ + errors = 0 + for name in ([] if value is None else _as_list(value)): + name = str(name) + if name in allowed: + continue + if name in legacy: + print_error(f'{rel}: {option} spells the legacy name "{name}"; the loader ' + f'still rewrites it to "{legacy[name]}", but a profile writes the ' + f"enum name") + elif name in runtime: + print_error(f'{rel}: {option} names "{name}", which the engine computes ' + f"for a hybrid extruder at runtime; no profile writes it") + else: + print_error(f'{rel}: {option} "{name}" is not one of ' + f'({", ".join(sorted(allowed))}); the option is an enum, so an ' + f"unknown value fails loading the whole bundle in the validator " + f"and silently becomes the default in the app") + errors += 1 + return errors + + +def check_variant_names(profiles_dir, vendor): + """Every variant string and extruder or nozzle volume type a preset writes is an + enum name the engine has. + + check_variant_arrays judges how many values a variant key holds; this judges what + the variants are called, the other half of the same scheme. It reads the four list + keys, extruder_type, nozzle_volume_type and default_nozzle_volume_type of every + preset the bundle's index references - bases included, since a base's list is what + sizes its children's arrays - and reports as errors, in every bundle alike: + + * a variant string the two enums cannot build (dead variant), a legacy spelling + the loader still rewrites in these keys included (_check_variant_string); + * a variant list naming one variant twice: the lookup returns the first equal + string, so the repeat is unreachable. A filament list takes variant strings, a + menu takes them per extruder, and a process takes (extruder id, variant) pairs, + where one string on two extruders is two pairs, not a repeat; + * an extruder_type, nozzle_volume_type or default_nozzle_volume_type that is not + an enum name a profile writes (_check_variant_seed). + + Key/value types elsewhere are check_vector_type_keys' and the validator's; a file + no list references is skipped, check_index_coverage having reported it. Returns + the error count. + """ + extruder_types, volume_types, legacy, extruder_legacy = _variant_names() + errors = 0 + listed = indexed_sub_paths(profiles_dir, vendor) + if listed is None: + return 0 + vendor_dir = os.path.join(profiles_dir, vendor) + + for path, _sub in iter_profile_files(vendor_dir): + if os.path.basename(path) in NON_PROFILE_FILES: + continue + sub_path = posixpath.normpath( + os.path.relpath(path, vendor_dir).replace(os.sep, "/")) + if sub_path not in listed: + continue + try: + data = load_json(path) + except (ValueError, OSError): + # Parse failures are reported by the checks that walk the same files. + continue + if not isinstance(data, dict): + continue + rel = f"{vendor}/{sub_path}" + + for key in ("extruder_variant_list", "printer_extruder_variant", + "print_extruder_variant", "filament_extruder_variant"): + if key in data: + for where, variant in _variant_entries(key, data[key]): + errors += _check_variant_string(rel, key, where, variant) + + # A list naming one variant twice, and the two enum values a variant string is + # composed from. + for message in _variant_repeats(data): + print_error(f"{rel}: {message}") + errors += 1 + errors += _check_variant_seed(rel, "extruder_type", data.get("extruder_type"), + extruder_types, extruder_legacy) + for option in ("nozzle_volume_type", "default_nozzle_volume_type"): + errors += _check_variant_seed(rel, option, data.get(option), volume_types, + legacy, RUNTIME_VOLUME_TYPES) + return errors + + +def check_variant_arrays(profiles_dir, vendor, strict=False): + """Every variant array an instantiated preset writes is exactly its + variant length x stride wide, and a printer's variant layout keys agree. + + Only instantiated presets are judged, each at the variant length of its composed + config (_variant_length's); a base is not, since what it writes counts only where + it reaches a preset that does not override it. A full-width array holds one + value per variant; any other width is an error, one value included and whatever + the values. A key the preset does not write takes what reaches it - the default, + or an array it inherits or includes - which the loader sizes to the preset, and + is not checked. With strict, every instantiated preset also holds each key that + reaches it at its own width, so a preset with other variants than the file its + array comes from restates the array. The machine_max_* limits hold + a (normal, silent) pair per variant. A process that lists variants pairs each + with its extruder id (extruder 1 everywhere when absent); a machine's layout keys + are held to _check_printer_layout, which reports a printer_extruder_id that does + not fit a written printer_extruder_variant, as the process check below does for + print_extruder_id. Returns (errors, warnings). + """ + errors = warnings = 0 + for ptype, rel, data, config, variant_length, reason in _variant_presets(profiles_dir, + vendor): + if data.get("instantiation") != "true": + continue + list_key, strides = _variant_scheme()[ptype] + listed = list_key in config + for key, stride in sorted(strides.items()): + if key not in config or (listed and key in ("printer_extruder_id", + "print_extruder_id")): + continue + if key not in data and not strict: + continue + value, path = config[key] + width, need = len(_as_list(value)), variant_length * stride + if width == need: + continue + print_error(f'{rel}: "{key}" has {width} values for variant length {variant_length}' + f"{' (' + reason + ')' if reason else ''} at stride {stride}, " + f"which takes {need}" + f"{'' if key in data else ' (it comes from ' + path[0] + ')'}") + errors += 1 + config = {key: value for key, (value, _path) in config.items()} + if ptype == "machine": + new_errors, new_warnings = _check_printer_layout(rel, config) + errors += new_errors + warnings += new_warnings + elif ptype == "process" and listed: + variants = _as_list(config[list_key]) + if "print_extruder_id" in config: + ids = _as_list(config["print_extruder_id"]) + if len(ids) != variant_length: + print_error(f"{rel}: print_extruder_id has {len(ids)} entries for the " + f"{variant_length} entries of print_extruder_variant; the two " + f"list the (extruder id, variant) pairs, one per entry") + errors += 1 + elif len(set(variants)) < len(variants): + print_warning(f"{rel}: print_extruder_variant repeats a variant but " + f"print_extruder_id is absent, so every entry defaults to " + f"extruder 1 and the repeated variant is unreachable") + warnings += 1 + return errors, warnings + + def check_conflict_keys(profiles_dir, vendor): """A renamed option and its old spelling must not co-exist in one profile. @@ -1232,11 +1859,11 @@ def check_normalized(profiles_dir, vendor): Those two commands define a profile file's canonical shape - identifying keys first, keys the slicer no longer reads gone, filament options that are vectors - written as vectors - and a .json's canonical lists, ordered parents-first - so the loader resolves every "inherits" in one pass. Running them over a - contributed bundle has to be a no-op; where it would not be, the file that was - reviewed is not the file that ships, and the next maintainer to run normalize - carries an unrelated diff into their own change. + written as vectors - and a .json's canonical lists, ordered + dependencies-first so the loader resolves every "inherits" and "include" in one + pass. Running them over a contributed bundle has to be a no-op; where it would + not be, the file that was reviewed is not the file that ships, and the next + maintainer to run normalize carries an unrelated diff into their own change. It asks the normalize and update-index sections below rather than restating what they do, because a second definition of normal is free to drift from the one that @@ -1292,9 +1919,12 @@ def check_normalized(profiles_dir, vendor): # check # --------------------------------------------------------------------------- -def check_profiles(profiles_dir=PROFILES_DIR, vendors=None): +def check_profiles(profiles_dir=PROFILES_DIR, vendors=None, strict=False): """Validate the whole profile tree. Returns the error count. + strict holds every preset's inherited and included variant arrays to its + own width too (check_variant_arrays). + The per-vendor checks honour `vendors`; the setting_id and filament_id checks are cross-vendor properties a narrowed run cannot answer, so they always cover the whole tree. With no `vendors`, every bundle is checked except the `user` directory @@ -1333,6 +1963,10 @@ def check_profiles(profiles_dir=PROFILES_DIR, vendors=None): warnings_found += new_warnings errors_found += check_vector_type_keys(profiles_dir, vendor) + errors_found += check_variant_names(profiles_dir, vendor) + new_errors, new_warnings = check_variant_arrays(profiles_dir, vendor, strict) + errors_found += new_errors + warnings_found += new_warnings errors_found += check_filament_id_length(profiles_dir, vendor) new_errors, gaps = check_index_coverage(profiles_dir, vendor) @@ -1353,9 +1987,11 @@ def check_profiles(profiles_dir=PROFILES_DIR, vendors=None): if remedies[category]: print_warning(f"{remedies[category]} {hint}") - # Cross-vendor checks: setting_id uniqueness and the whole filament_id state, - # both validated over the entire tree regardless of --vendor. + # Cross-vendor checks: setting_id and machine_model name uniqueness and the + # whole filament_id state, all validated over the entire tree regardless of + # --vendor. errors_found += check_setting_id_uniqueness(profiles_dir) + errors_found += check_machine_model_name_uniqueness(profiles_dir) errors_found += check_filament_ids(profiles_dir) print("\n==================== SUMMARY ====================") @@ -1435,6 +2071,49 @@ def delete_key_line(text, key, old_value=None): return text, 0 +_JSON_WS = re.compile(r"[ \t\r\n]*") + + +def _json_members(text): + """(key, key start, value start, value end) of each member of the top-level + JSON object in text, in file order.""" + decoder = json.JSONDecoder() + members = [] + i = _JSON_WS.match(text, text.index("{") + 1).end() + while text[i] != "}": + key_start = i + key, i = decoder.raw_decode(text, i) + i = _JSON_WS.match(text, _JSON_WS.match(text, i).end() + 1).end() # past the ':' + _value, end = decoder.raw_decode(text, i) + members.append((key, key_start, i, end)) + i = _JSON_WS.match(text, end).end() + i = _JSON_WS.match(text, i + (text[i] == ",")).end() + return members + + +def set_array_value(text, key, values): + """Write values as the "key" array, byte-preserving the rest. + + An existing array keeps its one-line or one-value-per-line layout; a preset + without the key gets it as its last member, one value per line, in the file's + own indentation and line ending. Returns (text, 1). + """ + items = [json.dumps(v, ensure_ascii=False) for v in values] + members = _json_members(text) + for name, _key_start, start, end in reversed(members): # json.load keeps the last + if name == key: + m = re.fullmatch(r"\[(\r?\n)([ \t]*).*(\r?\n)([ \t]*)\]", text[start:end], re.DOTALL) + array = ("[" + ", ".join(items) + "]" if m is None else + "[" + m[1] + ("," + m[1]).join(m[2] + item for item in items) + + m[3] + m[4] + "]") + return text[:start] + array + text[end:], 1 + _name, key_start, _start, end = members[-1] + indent = text[text.rfind("\n", 0, key_start) + 1:key_start] + nl = "\r\n" if "\r\n" in text else "\n" + array = "[" + nl + ("," + nl).join(indent * 2 + item for item in items) + nl + indent + "]" + return text[:end] + "," + nl + indent + json.dumps(key) + ": " + array + text[end:], 1 + + def insert_filament_id(text, new_id): """Insert a `"filament_id"` line before `instantiation`, else after `name`.""" return insert_key_line(text, "filament_id", new_id, @@ -1850,6 +2529,21 @@ def create_ordered_profile(profile, priority_fields): # The keys that identify a preset, hoisted to the top of every rewritten file. NORMALIZE_FIELD_ORDER = ("type", "name", "renamed_from", "inherits", "from", "setting_id", "filament_id", "instantiation") + + +def identity_block_misplaced(keys): + """The identifying keys are not a correctly ordered prefix of `keys`. + + create_ordered_profile hoists them, so this is the one part of the canonical + shape a rewrite is guaranteed to change. Without asking, normalize would only + ever apply the hoist as a side effect of some other rule firing, which leaves + a file that breaks this rule reported as already normalized. + """ + present = [k for k in keys if k in NORMALIZE_FIELD_ORDER] + return (keys[:len(present)] != present + or present != [k for k in NORMALIZE_FIELD_ORDER if k in keys]) + + # Settings a filament profile must not pin: they belong to the process. FILAMENT_DROP_FIELDS = ("initial_layer_print_speed", "outer_wall_speed", "inner_wall_speed", "infill_speed", "top_surface_speed", @@ -1909,6 +2603,11 @@ def _normalize_profile(data, sub): del data[field] changes.append(f"remove {field}") + # Last, because it describes the file as written rather than its contents, and + # create_ordered_profile does the hoisting when the file is written. + if identity_block_misplaced(list(data)): + changes.append("put the identifying keys first") + return changes @@ -1977,9 +2676,9 @@ def trim_profiles(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None, cli_config.json carry no "type" - all of them stay. A file that cannot be parsed is reported and kept: never delete what could not be read. - An unindexed file that some surviving profile names in "inherits" is kept too, - and reported, UNLESS an indexed profile already carries that name: "inherits" is - resolved by preset name, so the indexed one is the parent every child actually + An unindexed file that some surviving profile names in "inherits" or "include" is + kept too, and reported, UNLESS an indexed profile already carries that name: both + are resolved by preset name, so the indexed one is the parent every child actually gets, and the unindexed file is a stale copy the loader never reaches. Where no indexed profile provides the name the inheriting preset really is broken, and deleting the file would destroy the only record of the settings it was written @@ -2012,7 +2711,7 @@ def trim_profiles(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None, listed.add(posixpath.normpath(sub_path.replace("\\", "/"))) candidates = {} # path -> profile, for every unindexed preset - inherited = set() # every name the files that stay claim as a parent + inherited = set() # every name the files that stay claim as a parent or include provided = {} # name -> sub_path, for the profiles the loader can see for sub in subs: for path in _walk_json(os.path.join(vendor_dir, sub)): @@ -2027,8 +2726,7 @@ def trim_profiles(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None, if not isinstance(profile, dict): continue if sub_path in listed or profile.get("type") not in PROFILE_TYPES: - if profile.get("inherits"): - inherited.add(profile["inherits"]) + inherited.update(profile_dependencies(profile)) if sub_path in listed and profile.get("name"): provided[profile["name"]] = sub_path continue @@ -2047,8 +2745,7 @@ def trim_profiles(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None, for path, profile in rescued.items(): del candidates[path] kept[path] = profile - if profile.get("inherits"): - inherited.add(profile["inherits"]) + inherited.update(profile_dependencies(profile)) for path in sorted(kept): print_warning(f"{_rel(path, profiles_dir)}: not indexed by {vendor}.json but " @@ -2085,40 +2782,48 @@ def trim_profiles(profiles_dir=PROFILES_DIR, vendors=None, profile_types=None, # update-index # --------------------------------------------------------------------------- -def topological_sort(profiles): - """Order index entries parents-first, so the loader resolves inherits in one pass. +def profile_dependencies(profile): + """The names a profile needs loaded before it: its parent and every include.""" + include = profile.get("include") or [] + if isinstance(include, str): + include = [include] + return [name for name in [profile.get("inherits"), *include] if name] - Entries whose parent is not in the same section keep their own (sorted) order at - the end; the loader finds those parents through the base bundle instead. + +def topological_sort(profiles): + """Order index entries dependencies-first, so the loader resolves every + "inherits" and "include" in one pass. + + Entries that neither depend on nor are depended on by another in the same section + go at the end in name order; the loader finds their parents, if any, through the + base bundle instead. Every entry on a dependency cycle, which no order can satisfy, + goes there too. """ graph = defaultdict(list) in_degree = defaultdict(int) by_name = {p["name"]: p for p in profiles} all_names = set(by_name) - placed = set() for profile in profiles: - parent = profile.get("inherits") child = profile["name"] - if parent in all_names: - graph[parent].append(child) - in_degree[child] += 1 - in_degree.setdefault(parent, 0) - placed.add(child) - placed.add(parent) + for parent in profile_dependencies(profile): + if parent in all_names: + graph[parent].append(child) + in_degree[child] += 1 + in_degree.setdefault(parent, 0) queue = sorted(name for name, degree in in_degree.items() if degree == 0) result = [] while queue: current = queue.pop(0) result.append(by_name[current]) - placed.add(current) for child in sorted(graph[current]): in_degree[child] -= 1 if in_degree[child] == 0: queue.append(child) - result.extend(by_name[name] for name in sorted(all_names - placed)) + ordered = {p["name"] for p in result} + result.extend(by_name[name] for name in sorted(all_names - ordered)) return result @@ -2168,15 +2873,15 @@ def build_index_sections(profiles_dir, vendor, profile_types=None): "name": name, "sub_path": os.path.relpath(path, vendor_dir).replace(os.sep, "/"), } - if profile.get("inherits"): - entry["inherits"] = profile["inherits"] + for key in ("inherits", "include"): + if profile.get(key): + entry[key] = profile[key] by_name[name].append(entry["sub_path"]) entries.append(entry) - sorted_entries = topological_sort(entries) - for entry in sorted_entries: - entry.pop("inherits", None) # ordering input only, not part of the index - sections[profile_type + "_list"] = sorted_entries + # inherits/include were ordering input only; the index holds name and sub_path + sections[profile_type + "_list"] = [{"name": e["name"], "sub_path": e["sub_path"]} + for e in topological_sort(entries)] for rel, found in sorted(unplaceable.items()): problems.append(f'{rel}: type {found!r} is not one of {list(PROFILE_TYPES)}, so it ' @@ -2240,6 +2945,128 @@ def update_profile_indexes(profiles_dir=PROFILES_DIR, vendors=None, profile_type return changed, errors +# --------------------------------------------------------------------------- +# fix-variant +# --------------------------------------------------------------------------- + +# The members of the variant sets that name the variants rather than hold values. +VARIANT_LAYOUT_KEYS = {"printer_extruder_variant", "printer_extruder_id", "print_extruder_variant", + "print_extruder_id", "filament_extruder_variant"} + + +def _fit_width(values, need, stride): + """values cut to need, or padded by repeating the last value - the last + (normal, silent) pair at stride 2, after dropping a trailing half pair; a lone + value fills every entry, normal and silent alike.""" + if len(values) > need: + return values[:need] + if len(values) == 1: + return values * need + values = values[:len(values) - len(values) % stride] + return values + values[-stride:] * ((need - len(values)) // stride) + + +def fix_variant_arrays(profiles_dir=PROFILES_DIR, vendors=None, dry_run=False, strict=False): + """Resize every variant array check_variant_arrays rejects to its + width: extra values are dropped, missing ones repeat the last. The variant lists + and extruder ids are layout, not values, and are left to check. + + An array an instantiated preset writes is resized in place, to the preset's + width; bases are left alone and no key is added. With strict, a key that then + reaches an instantiated preset at another width is written, resized, into the + most general file on the way down to the preset whose own width it fits and whose + instantiated presets taking it all need that width - a base only the presets with + a variant list inherit, say - else into the preset's own file. Presets of every bundle count towards that agreement; only + files of `vendors` are touched. Returns (files changed, errors). + """ + profiles_dir = str(profiles_dir) + names = list_vendor_names(profiles_dir) + scope = set(vendors or names) + files = {rel: data for vendor in names + for configs in load_vendor_configs(profiles_dir, vendor).values() + for rel, data in configs.values()} + verb = "would " if dry_run else "" + changed, errors = set(), 0 + + def fit(rel, key, values, need, stride): + fitted = _fit_width(values, need, stride) + if not fitted: + print_error(f'{rel}: "{key}" cannot be resized from {len(values)} to {need} values') + return fitted + + # Each preset's own arrays first, then (strict) what reaches the presets; a write + # into a preset hands its children a new source, which the next pass judges. The + # in-memory configs take each write so a dry run sees it too. + for _ in range(8): + own = {} # file -> its own variant length + users = defaultdict(list) # (file, key) -> [(value, path, need, stride)] + writes = defaultdict(dict) # file -> {key: values} + for vendor in names: + for ptype, rel, data, config, variant_length, _reason in _variant_presets( + profiles_dir, vendor): + own[rel] = variant_length + instantiated = data.get("instantiation") == "true" + for key, stride in _variant_scheme()[ptype][1].items(): + if key not in config or key in VARIANT_LAYOUT_KEYS: + continue + value, path = config[key] + values, need = _as_list(value), variant_length * stride + if key in data: + if len(values) != need and instantiated and vendor in scope: + fitted = fit(rel, key, values, need, stride) + if fitted: + writes[rel][key] = fitted + else: + errors += 1 + elif strict and instantiated: + users[(path[0], key)].append((values, path, need, stride)) + if not writes and strict: + for (_source, key), group in users.items(): + for values, path, need, stride in group: + if len(values) == need or path[-1].split("/")[0] not in scope: + continue + target = next((f for f in path if f.split("/")[0] in scope + and own[f] * stride == need + and all(n == need for _v, p, n, _s in group if f in p)), + path[-1]) + fitted = fit(path[-1], key, values, need, stride) + if fitted: + writes[target][key] = fitted + else: + errors += 1 + if not writes or errors: + break + for rel, arrays in sorted(writes.items()): + def apply(text, _arrays=arrays): + for key, values in _arrays.items(): + text, _n = set_array_value(text, key, values) + return text, len(_arrays) + + try: + data = _edit_profile(os.path.join(profiles_dir, *rel.split("/")), apply, dry_run, + "variant array resize") + except (OSError, RuntimeError, ValueError) as e: + print_error(str(e)) + errors += 1 + continue + print_info(f"{verb}resize {rel}: " + ", ".join( + f"{key} {len(_as_list(files[rel][key])) if key in files[rel] else 'added'}" + f" -> {len(values)}" for key, values in arrays.items())) + files[rel].update(arrays) + changed.add(rel) + if any(data.get(key) != values for key, values in arrays.items()): + print_error(f"{rel}: the variant array resize did not take effect") + errors += 1 + if errors: + break + else: + print_error("variant array resize did not settle; run check") + errors += 1 + load_vendor_configs.cache_clear() # its configs took the writes above + print_success(f"{len(changed)} profile(s) {'would be ' if dry_run else ''}resized") + return len(changed), errors + + # --------------------------------------------------------------------------- # CLI # --------------------------------------------------------------------------- @@ -2257,6 +3084,10 @@ examples: preview exactly that; writes nothing orca_profile_tool.py generate-id --setting-id --vendor Elegoo setting_id only, and only in that bundle + orca_profile_tool.py fix-variant --vendor Snapmaker --dry-run + preview resizing the variant arrays check rejects in that bundle + orca_profile_tool.py check --strict --vendor BBL + also hold every preset's inherited variant arrays to its own width after adding, renaming or deleting profile files, run in this order: normalize -> update-index -> generate-id -> check @@ -2305,19 +3136,39 @@ def build_parser(): name, parents=parents, help=help_text, description=description, allow_abbrev=False, formatter_class=argparse.RawDescriptionHelpFormatter) + strict_opt = argparse.ArgumentParser(add_help=False) + strict_opt.add_argument("--strict", action="store_true", + help="also hold every preset's inherited and included variant " + "arrays to its own width") + add( - "check", [vendor_opt, profiles_opt], + "check", [vendor_opt, strict_opt, profiles_opt], "validate the whole profile tree -- what CI runs", "Validate the whole profile tree: preset name uniqueness, index coverage\n" "both ways, compatible_printers, default-material references, obsolete,\n" - "conflicting and vector-typed keys, filament_id length, that normalize and\n" - "update-index would leave every bundle alone, and the tree-wide setting_id\n" - "and filament_id state. Exits nonzero on errors.\n" + "conflicting and vector-typed keys, variant names and variant array widths,\n" + "filament_id length, that normalize and update-index would leave every\n" + "bundle alone, and the tree-wide setting_id and filament_id state. Exits\n" + "nonzero on errors.\n" "\n" "--vendor narrows the per-vendor checks only: setting_id uniqueness and the\n" "filament_id state are cross-vendor properties a narrowed run cannot answer,\n" "so they always cover the whole tree.") + add("fix-variant", [vendor_opt, strict_opt, dry_run_opt, profiles_opt], + "resize the variant arrays check rejects", + "Resize every variant array that check reports as the wrong width\n" + "in the selectable preset that writes it: extra values are dropped, missing\n" + "ones repeat the last value (the last normal/silent pair for machine_max_*).\n" + "Bases are left alone and no key is added. The variant lists and extruder\n" + "ids are left to check. Byte-preserving apart from the arrays it writes.\n" + "\n" + "--strict then also writes each key that reaches a preset at another width:\n" + "into the most general file on the way down to the preset that has the\n" + "preset's width and whose presets all agree, else into the preset itself.\n" + "Presets of every bundle count towards that agreement; --vendor limits the\n" + "files written.") + generate_cmd = add( "generate-id", [vendor_opt, dry_run_opt, profiles_opt], "write the id each profile's identity implies", @@ -2361,7 +3212,8 @@ def build_parser(): add("update-index", [vendor_opt, type_opt, dry_run_opt, profiles_opt], "regenerate the *_list sections of .json", "Rebuild the *_list sections of each .json from the files on disk,\n" - "ordered parents-first so the loader resolves inherits in one pass.\n" + "ordered dependencies-first so the loader resolves inherits and include\n" + "in one pass.\n" "\n" "A profile is indexed under the section its own \"type\" names, so run\n" "normalize first: it is what writes a missing type. Two files claiming one\n" @@ -2396,14 +3248,17 @@ def main(argv=None): profile_types = tuple(getattr(args, "profile_type", []) or ()) or None if args.command == "check": - errors = check_profiles(profiles_dir, vendors) + errors = check_profiles(profiles_dir, vendors, strict=args.strict) return 1 if errors else 0 if args.command == "generate-id": return run_generate_id(profiles_dir, vendors, args.filament_id, args.setting_id, args.dry_run) - if args.command == "normalize": + if args.command == "fix-variant": + _changed, errors = fix_variant_arrays(profiles_dir, vendors, dry_run=args.dry_run, + strict=args.strict) + elif args.command == "normalize": _changed, errors = normalize_profiles(profiles_dir, vendors, profile_types, force=args.force, dry_run=args.dry_run) elif args.command == "trim": diff --git a/scripts/run_unit_tests.sh b/scripts/run_unit_tests.sh index 1d3f0046fd..c4433df04d 100755 --- a/scripts/run_unit_tests.sh +++ b/scripts/run_unit_tests.sh @@ -2,7 +2,8 @@ # This file is made to support the unit tests workflow. # It should only require the directories build/tests, scripts/, and tests/ to function, -# and cmake (with ctest) installed. +# and cmake (with ctest) installed -- plus network access to PyPI whenever numpy has to +# be installed into a freshly built test tree (see below). # (otherwise, update the workflow too, but try to avoid to keep things self-contained) # # Usage: run_unit_tests.sh [TEST_DIR] [BUILD_CONFIG] @@ -18,6 +19,52 @@ cd "${ROOT_DIR}" || exit 1 TEST_DIR="${1:-build/tests}" BUILD_CONFIG="${2:-}" +# The slic3rutils plugin-host tests build numpy arrays through the CPython copied next +# to the test binary (see tests/slic3rutils/CMakeLists.txt), which ships no numpy. +# Install it with the uv staged beside that runtime -- the tool the app installs plugin +# dependencies with -- straight into the interpreter's own site-packages: no pip needed +# in the runtime, no PYTHONPATH. Re-checked every run because a rebuild of the test +# target re-copies the runtime; needs network whenever it installs. Pinned so a numpy +# release cannot change results on its own. +NUMPY_VERSION="2.5.3" + +# Without numpy those tests assert the numpy-absent error path instead, so a local run +# only warns. Under CI it fails the run, which would otherwise stay green while silently +# dropping the array coverage. (The Flatpak leg runs this inside `flatpak build`, whose +# minimal environment has no CI, and its offline build stages no uv, so numpy stays +# best-effort there.) +numpy_unavailable() { + if [ -n "${CI:-}" ]; then + echo "error: $1" >&2 + exit 1 + fi + echo "warning: $1; the numpy-backed binding tests will cover only the numpy-absent path." +} + +has_pinned_numpy() { + "${python_exe}" -c "import sys, numpy; sys.exit(numpy.__version__ != '${NUMPY_VERSION}')" >/dev/null 2>&1 +} + +find_args=("${TEST_DIR}" \( -path '*/python/bin/python3' -o -path '*/python/python.exe' \)) +# Multi-config trees hold one copy per configuration; only bootstrap the one being run. +[ -n "${BUILD_CONFIG}" ] && find_args+=(-path "*/${BUILD_CONFIG}/*") +python_exe="$(find "${find_args[@]}" -print -quit 2>/dev/null)" + +if [ -z "${python_exe}" ]; then + numpy_unavailable "no bundled Python under ${TEST_DIR}" +elif ! has_pinned_numpy; then + uv_exe="${python_exe%/python/*}/tools/uv/uv" + # Builds that bundle no uv (Windows arm64) fall back to one on PATH. + [ -x "${uv_exe}" ] || uv_exe="$(command -v uv)" + echo "Installing numpy ${NUMPY_VERSION} into the embedded test interpreter (${python_exe})..." + if [ -z "${uv_exe}" ]; then + numpy_unavailable "no uv staged beside the tests or on PATH" + elif ! "${uv_exe}" pip install --python "${python_exe}" --only-binary :all: "numpy==${NUMPY_VERSION}" \ + || ! has_pinned_numpy; then + numpy_unavailable "could not install numpy ${NUMPY_VERSION} into ${python_exe}" + fi +fi + # Run the whole suite, excluding tests tagged [NotWorking] and tests labelled RequiresApp, # which run the built orca-slicer binary that this directory does not contain. # --no-tests=error fails the job if the filter matches nothing (instead of passing green). diff --git a/scripts/tests/test_filament_id.py b/scripts/tests/test_filament_id.py index 001763fca9..fc62f5abc3 100644 --- a/scripts/tests/test_filament_id.py +++ b/scripts/tests/test_filament_id.py @@ -405,6 +405,20 @@ class TestTripleResolution(unittest.TestCase): self.assertEqual(afi.resolve_triple("MyPLA @P1", fmap, {}), ("MyVendor", "PLA", "MyPLA")) + def test_split_vendor_and_type_bases_resolve(self): + # A partial base is normal, not an error: vendor and type may live on + # different ancestors, with an intermediate supplying neither (the + # Snapmaker shape). The pair is complete at the instantiated preset. + recs = [ + self.rec("APLA @P1", inherits="mid"), + self.rec("mid", inherits="typebase"), + self.rec("typebase", filament_type=["PLA"], inherits="vendorbase"), + self.rec("vendorbase", filament_vendor=["AV"]), + ] + fmap = {r["name"]: r for r in recs} + self.assertEqual(afi.resolve_triple("APLA @P1", fmap, {}), + ("AV", "PLA", "APLA")) + # --------------------------------------------------------------------------- # checks on synthetic trees @@ -417,6 +431,24 @@ class TestChecks(OfCleanTreeCase): self.assertNotIn("[ERROR]", out) self.assertNotIn("[WARNING]", out) + def test_instantiated_preset_over_partial_bases_is_silent(self): + # Vendor and type split across two non-instantiated bases, an + # intermediate base with neither: base profiles are allowed to be + # partial. Only the instantiated preset must resolve both. + self.t.write_preset("VendorA", preset("XPLA vendorbase", instantiation=False, + filament_vendor="XV")) + self.t.write_preset("VendorA", preset("XPLA typebase", instantiation=False, + filament_type="PLA", + inherits="XPLA vendorbase")) + self.t.write_preset("VendorA", preset("XPLA mid", instantiation=False, + inherits="XPLA typebase")) + self.t.write_preset("VendorA", preset( + "XPLA @P1", inherits="XPLA mid", + filament_id=afi.generate_filament_id("XV", "PLA", "XPLA"), + compatible_printers=["P1"])) + errors, out = self.t.check() + self.assertEqual(errors, 0, out) + def test_check1_unknown_non_of_id(self): self.t.write_preset("VendorA", preset("BPLA @base", filament_id="BOGUS_9", instantiation=False, @@ -1523,6 +1555,19 @@ class TestRealTree(unittest.TestCase): self.assertEqual(analysis["missing_effective"], []) self.assertEqual(analysis["read_errors"], []) + def test_every_instantiated_filament_resolves_vendor_and_type(self): + # The property the web guide resolves at load: a partial base is fine as + # long as the instantiated preset ends up with both fields. Guards the + # split-base bundles (Snapmaker, Anker, SeeMeCNC). + analysis = afi.analyze_tree(REAL_PROFILES) + unresolved = [ + (vendor, rec["name"], rec["triple"][0], rec["triple"][1]) + for vendor, filaments in analysis["vendors"].items() + for rec in filaments.values() + if rec["instantiation"] and not (rec["triple"][0] and rec["triple"][1]) + ] + self.assertEqual(unresolved, []) + # --------------------------------------------------------------------------- # review-fix regressions # --------------------------------------------------------------------------- diff --git a/scripts/tests/test_profile_tool.py b/scripts/tests/test_profile_tool.py index 29b62b693e..a4e9a6f81b 100644 --- a/scripts/tests/test_profile_tool.py +++ b/scripts/tests/test_profile_tool.py @@ -1,7 +1,7 @@ #!/usr/bin/env python3 """Tests for the tree-maintenance half of scripts/orca_profile_tool.py: the -normalize, trim, update-index and check commands, and the subcommand dispatch that -reaches them (stdlib unittest, no external deps). +normalize, trim, update-index, fix-variant and check commands, and the subcommand +dispatch that reaches them (stdlib unittest, no external deps). The id halves are covered by test_filament_id.py and test_setting_id.py. @@ -140,6 +140,28 @@ class TestObsoleteKeys(unittest.TestCase): self.assertEqual(apt.OBSOLETE_KEYS, set(re.findall(r'"([^"\n]+)"', keys))) +class TestVariantScheme(unittest.TestCase): + def test_the_key_sets_are_read_from_the_engine(self): + scheme = apt._variant_scheme() + self.assertEqual(scheme["machine"][1]["retraction_length"], 1) + self.assertEqual(scheme["machine"][1]["machine_max_speed_x"], 2) + self.assertIn("outer_wall_speed", scheme["process"][1]) + self.assertIn("nozzle_temperature", scheme["filament"][1]) + # Commented out of its initializer, so not a member. + self.assertNotIn("filament_extruder_id", scheme["filament"][1]) + for list_key, strides in scheme.values(): + self.assertEqual(strides[list_key], 1) + + def test_the_variant_names_are_read_from_the_engine(self): + extruder_types, volume_types, legacy, extruder_legacy = apt._variant_names() + self.assertEqual(extruder_types, {"Direct Drive", "Bowden"}) + self.assertEqual(volume_types, {"Standard", "High Flow", "TPU High Flow", "E3D High Flow", "Extra High Flow"}) + # Hybrid is an enum value no variant string may name. + self.assertNotIn("Hybrid", volume_types) + self.assertEqual(legacy, {"Normal": "Standard", "Big Traffic": "High Flow"}) + self.assertEqual(extruder_legacy, {"DirectDrive": "Direct Drive"}) + + class TestNormalize(TreeCase): def test_a_missing_type_is_filled_in_from_the_directory(self): self.t.write("V", "filament/A.json", {"name": "A"}) @@ -411,6 +433,26 @@ class TestUpdateIndex(TreeCase): for entry in self.t.read_index("V")["filament_list"]: self.assertEqual(sorted(entry), ["name", "sub_path"]) + def test_include_targets_are_listed_before_their_users(self): + # The loader resolves include like inherits: in one pass over the list, so + # a template must be listed before every preset that includes it - even + # though a template has no parent of its own to order it by. + self.t.write("V", "machine/P.json", {"type": "machine", "name": "P", + "include": ["T start", "T end"]}) + self.t.write("V", "machine/T start.json", {"type": "machine", "name": "T start"}) + self.t.write("V", "machine/T end.json", {"type": "machine", "name": "T end"}) + self.t.write("V", "filament/F.json", {"type": "filament", "name": "F", + "inherits": "B", "include": "S"}) + self.t.write("V", "filament/B.json", {"type": "filament", "name": "B"}) + self.t.write("V", "filament/S.json", {"type": "filament", "name": "S"}) + rc, out = self.run_command("update-index") + self.assertEqual(rc, 0, out) + machines = [e["name"] for e in self.t.read_index("V")["machine_list"]] + self.assertEqual(machines, ["T end", "T start", "P"]) + filaments = [e["name"] for e in self.t.read_index("V")["filament_list"]] + self.assertLess(filaments.index("B"), filaments.index("F")) + self.assertLess(filaments.index("S"), filaments.index("F")) + def test_a_profile_with_no_usable_type_is_reported_not_dropped(self): self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"}) self.t.write("V", "filament/B.json", {"name": "B"}) @@ -678,6 +720,34 @@ class TestCheck(TreeCase): errors, out = self.names(vendor) self.assertEqual(errors, 0, out) + def machine_models(self): + """The cross-vendor machine_model name check, whole tree by design.""" + buf = io.StringIO() + with contextlib.redirect_stdout(buf): + errors = apt.check_machine_model_name_uniqueness(self.t.profiles) + return errors, buf.getvalue() + + def test_two_bundles_may_not_declare_one_machine_model_name(self): + # The name keys the global printer-type lookup: Preset::get_printer_type + # matches a preset's printer_model against every vendor's model names, so a + # copy of another vendor's model is ambiguous, not merely duplicated. + for vendor in ("V", "W"): + self.t.write(vendor, "machine/MyKlipper.json", + {"type": "machine_model", "name": "Generic Klipper Printer", + "model_id": "my_klipper_01"}) + errors, out = self.machine_models() + self.assertEqual(errors, 1, out) + self.assertIn('machine_model name "Generic Klipper Printer"', out) + self.assertIn("V/machine/MyKlipper.json", out) + self.assertIn("W/machine/MyKlipper.json", out) + + def test_distinct_machine_model_names_are_left_alone(self): + for vendor in ("V", "W"): + self.t.write(vendor, "machine/model.json", + {"type": "machine_model", "name": f"{vendor} Model"}) + errors, out = self.machine_models() + self.assertEqual(errors, 0, out) + def coverage(self, vendor="V"): """The index-coverage check for one bundle: (errors, gaps, output).""" buf = io.StringIO() @@ -869,10 +939,315 @@ class TestNormalized(TreeCase): # CLI dispatch # --------------------------------------------------------------------------- +class TestFixVariant(TreeCase): + def preset(self, rel, **data): + name = os.path.splitext(os.path.basename(rel))[0] + self.t.write("V", rel, {"type": rel.split("/")[0], "name": name, **data}) + self.t.index("V", rel.split("/")[0], name, rel) + + def processes(self, common): + """outer_wall_speed written once in a list-less base, reached by list-less + presets through one base and by two-variant presets through another.""" + dual = ["Direct Drive Standard", "Direct Drive High Flow"] + self.preset("process/common.json", instantiation="false", outer_wall_speed=common) + self.preset("process/single.json", inherits="common", instantiation="false") + self.preset("process/dual.json", inherits="common", instantiation="false", + print_extruder_variant=dual, print_extruder_id=["1", "1"]) + for name, base in (("S1", "single"), ("S2", "single"), ("D1", "dual")): + self.preset(f"process/{name}.json", inherits=base, instantiation="true") + + def width_errors(self, *strict): + buf = io.StringIO() + with contextlib.redirect_stdout(buf): + errors, _warnings = apt.check_variant_arrays(self.t.profiles, "V", bool(strict)) + return errors, buf.getvalue() + + def test_a_machine_without_a_variant_list_has_one_variant_per_extruder(self): + # extruder_variant_list defaults to one "Direct Drive Standard" per extruder. + self.preset("machine/M.json", instantiation="true", nozzle_diameter=["0.4", "0.4"], + retraction_length=["0.8", "1.2"], z_hop=["0.4"], + machine_max_speed_x=["500", "200"]) + errors, out = self.width_errors() + self.assertEqual(errors, 2, out) + self.assertIn('M.json: "z_hop" has 1 values for variant length 2 (no ' + 'printer_extruder_variant, so one default variant per extruder) at stride 1, ' + 'which takes 2', out) + self.assertIn('M.json: "machine_max_speed_x" has 2 values for variant length 2', out) + self.assertNotIn("retraction_length", out) + + def test_one_value_is_an_error_where_the_list_has_more_variants(self): + self.preset("process/P.json", instantiation="true", outer_wall_speed=["30"], + print_extruder_id=["1", "1"], + print_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow"]) + errors, out = self.width_errors() + self.assertEqual(errors, 1, out) + self.assertIn('P.json: "outer_wall_speed" has 1 values for variant length 2 at stride 1, ' + 'which takes 2', out) + + def test_one_value_is_padded_to_every_variant(self): + self.preset("machine/M.json", instantiation="true", nozzle_diameter=["0.4"] * 3, + retraction_length=["0.8"], machine_max_speed_x=["500", "200"]) + rc, out = self.run_command("fix-variant") + self.assertEqual(rc, 0, out) + machine = self.t.read("V", "machine/M.json") + self.assertEqual(machine["retraction_length"], ["0.8"] * 3) + self.assertEqual(machine["machine_max_speed_x"], ["500", "200"] * 3) + self.assertEqual(self.width_errors()[0], 0) + + def test_extruder_ids_are_left_to_check(self): + self.preset("process/P.json", instantiation="true", print_extruder_id=["1"], + print_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow"]) + self.run_command("fix-variant") + self.assertEqual(self.t.read("V", "process/P.json")["print_extruder_id"], ["1"]) + errors, out = self.width_errors() + self.assertEqual(errors, 1, out) + self.assertIn("print_extruder_id has 1 entries for the 2 entries", out) + + def test_a_base_is_judged_only_where_its_array_reaches_a_preset(self): + # A leaf overriding the base's one-value limit passes in both modes. + self.preset("machine/common.json", instantiation="false", machine_max_speed_x=["500"]) + self.preset("machine/M.json", inherits="common", instantiation="true", + machine_max_speed_x=["500", "200"]) + self.assertEqual(self.width_errors()[0], 0) + self.assertEqual(self.width_errors("strict")[0], 0) + + def test_a_shared_array_is_fixed_in_the_base_whose_presets_agree(self): + self.processes(["30", "40"]) + self.assertEqual(self.width_errors()[0], 0) + errors, out = self.width_errors("strict") + self.assertEqual(errors, 2, out) + self.assertIn('process/S1.json: "outer_wall_speed" has 2 values for variant length 1', out) + rc, out = self.run_command("fix-variant", "--strict") + self.assertEqual(rc, 0, out) + self.assertEqual(self.t.read("V", "process/single.json")["outer_wall_speed"], ["30"]) + self.assertEqual(self.t.read("V", "process/common.json")["outer_wall_speed"], + ["30", "40"]) + self.assertNotIn("outer_wall_speed", self.t.read("V", "process/S1.json")) + self.assertEqual(self.width_errors("strict")[0], 0) + + def test_an_inherited_array_is_checked_and_restated_only_when_strict(self): + self.processes(["30"]) + self.assertEqual(self.width_errors()[0], 0) + errors, out = self.width_errors("strict") + self.assertEqual(errors, 1, out) + self.assertIn('process/D1.json: "outer_wall_speed" has 1 values for variant length 2 at ' + 'stride 1, which takes 2 (it comes from V/process/common.json)', out) + before = self.t.bytes_map() + self.run_command("fix-variant") + self.assertEqual(self.t.bytes_map(), before) + rc, out = self.run_command("fix-variant", "--strict") + self.assertEqual(rc, 0, out) + self.assertEqual(self.t.read("V", "process/dual.json")["outer_wall_speed"], ["30", "30"]) + self.assertEqual(self.t.read("V", "process/common.json")["outer_wall_speed"], ["30"]) + self.assertEqual(self.width_errors("strict")[0], 0) + + def test_a_strict_array_never_lands_in_a_file_of_another_width(self): + # common is list-less (width 1) and D2 inherits it directly, so D2 takes it. + self.processes(["30"]) + self.preset("process/D2.json", inherits="common", instantiation="true", + print_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow"], + print_extruder_id=["1", "1"]) + self.run_command("fix-variant", "--strict") + self.assertEqual(self.t.read("V", "process/D2.json")["outer_wall_speed"], ["30", "30"]) + self.assertEqual(self.t.read("V", "process/common.json")["outer_wall_speed"], ["30"]) + self.assertEqual(self.width_errors("strict")[0], 0) + + def test_extra_values_are_dropped_where_they_are_written(self): + self.preset("process/base.json", instantiation="false", outer_wall_speed=["30", "0"]) + self.preset("process/P1.json", inherits="base", instantiation="true", + inner_wall_speed=["40", "0"]) + self.preset("process/P2.json", inherits="base", instantiation="true") + self.run_command("fix-variant") + self.assertEqual(self.t.read("V", "process/P1.json")["inner_wall_speed"], ["40"]) + self.assertEqual(self.t.read("V", "process/base.json")["outer_wall_speed"], ["30", "0"]) + self.run_command("fix-variant", "--strict") + self.assertEqual(self.t.read("V", "process/base.json")["outer_wall_speed"], ["30"]) + self.assertNotIn("outer_wall_speed", self.t.read("V", "process/P1.json")) + + def test_the_rest_of_the_file_keeps_its_bytes(self): + self.t.write_raw("V", "process/P.json", b'{\n "type": "process", "name": "P",\n' + b' "instantiation": "true",\n "outer_wall_speed": ["30", "0"],\n' + b' "inner_wall_speed": [\n "40",\n "0"\n ]\n}\n') + self.t.index("V", "process", "P", "process/P.json") + self.run_command("fix-variant") + self.assertEqual(self.t.raw("V", "process/P.json"), + b'{\n "type": "process", "name": "P",\n' + b' "instantiation": "true",\n "outer_wall_speed": ["30"],\n' + b' "inner_wall_speed": [\n "40"\n ]\n}\n') + + def test_a_dry_run_writes_nothing(self): + self.processes(["30"]) + before = self.t.bytes_map() + rc, out = self.run_command("fix-variant", "--strict", "--dry-run") + self.assertEqual(rc, 0, out) + self.assertIn("would resize V/process/dual.json: outer_wall_speed added -> 2", out) + self.assertEqual(self.t.bytes_map(), before) + + def test_padding_repeats_the_last_value_or_pair(self): + self.assertEqual(apt._fit_width(["a", "b"], 4, 1), ["a", "b", "b", "b"]) + self.assertEqual(apt._fit_width(["a", "b", "c"], 6, 2), ["a", "b"] * 3) + self.assertEqual(apt._fit_width(["a", "b", "c"], 2, 2), ["a", "b"]) + self.assertEqual(apt._fit_width(["a"], 4, 2), ["a"] * 4) + + +class TestVariantNames(TreeCase): + def preset(self, rel, vendor="V", **data): + section = rel.split("/")[0] + name = os.path.splitext(os.path.basename(rel))[0] + self.t.write(vendor, rel, {"type": section, "name": name, **data}) + self.t.index(vendor, section, name, rel) + + def names(self, vendor="V"): + buf = io.StringIO() + with contextlib.redirect_stdout(buf): + errors = apt.check_variant_names(self.t.profiles, vendor) + return errors, buf.getvalue() + + def test_a_legal_variant_layout_passes(self): + self.preset("machine/M.json", instantiation="true", nozzle_diameter=["0.4"], + extruder_type=["Direct Drive"], + extruder_variant_list=["Direct Drive Standard,Direct Drive High Flow"], + printer_extruder_id=["1", "1"], + printer_extruder_variant=["Direct Drive Standard", + "Direct Drive High Flow"], + nozzle_volume_type=["High Flow"], + default_nozzle_volume_type=["Standard"]) + self.preset("process/P.json", instantiation="true", print_extruder_id=["1", "1"], + print_extruder_variant=["Direct Drive Standard", + "Direct Drive High Flow"]) + self.preset("filament/F.json", instantiation="true", + filament_extruder_variant=["Direct Drive Standard", "Bowden High Flow"]) + self.assertEqual(self.names()[0], 0, self.names()[1]) + + def test_a_variant_the_enum_cannot_build_is_an_error(self): + # An unknown volume type, in a list and in a menu, an extruder type that is not + # one, and the legacy extruder spelling that is rewritten in extruder_type alone. + cases = (("process/P1.json", "print_extruder_variant", "Direct Drive Fast", + 'entry 1 holds "Direct Drive Fast"', + "not a nozzle volume type the enum has"), + ("machine/M.json", "extruder_variant_list", + "Direct Drive Standard,Direct Drive Fast", + 'extruder 1 holds "Direct Drive Fast"', + "not a nozzle volume type the enum has"), + ("process/P2.json", "print_extruder_variant", "DD Standard", + 'entry 1 holds "DD Standard"', + "does not start with an extruder type the enum has"), + ("filament/F.json", "filament_extruder_variant", "DirectDrive Standard", + 'entry 1 holds "DirectDrive Standard"', + "does not start with an extruder type the enum has")) + for rel, key, value, _held, _why in cases: + self.preset(rel, instantiation="false", **{key: [value]}) + errors, out = self.names() + self.assertEqual(errors, len(cases), out) + for rel, key, _value, held, why in cases: + self.assertIn(f"V/{rel}: {key} {held}", out) + self.assertIn(why, out) + + def test_the_legacy_names_the_loader_rewrites_are_errors(self): + self.preset("machine/M.json", extruder_type=["DirectDrive"], + nozzle_volume_type=["Big Traffic"], + default_nozzle_volume_type=["Normal"], + printer_extruder_variant=["Direct Drive Big Traffic"]) + errors, out = self.names() + self.assertEqual(errors, 4, out) + self.assertIn('extruder_type spells the legacy name "DirectDrive"; the loader ' + 'still rewrites it to "Direct Drive"', out) + self.assertIn('V/machine/M.json: nozzle_volume_type spells the legacy name ' + '"Big Traffic"', out) + self.assertIn('default_nozzle_volume_type spells the legacy name "Normal"', out) + self.assertIn('holds the legacy variant "Direct Drive Big Traffic"', out) + self.assertIn('a profile writes the enum name: "Direct Drive High Flow"', out) + + def test_an_empty_entry_is_an_error(self): + self.preset("filament/F.json", + filament_extruder_variant=["Direct Drive Standard", ""]) + errors, out = self.names() + self.assertEqual(errors, 1, out) + self.assertIn("filament_extruder_variant entry 2 is empty", out) + + def test_hybrid_is_runtime_only(self): + self.preset("machine/M.json", nozzle_volume_type=["Hybrid"], + default_nozzle_volume_type=["Hybrid"], + printer_extruder_variant=["Direct Drive Hybrid"]) + errors, out = self.names() + self.assertEqual(errors, 3, out) + self.assertIn("Hybrid names the sub-nozzles of one hybrid extruder at runtime", out) + self.assertIn('V/machine/M.json: nozzle_volume_type names "Hybrid"', out) + self.assertIn('default_nozzle_volume_type names "Hybrid"', out) + + def test_bbl_is_held_to_the_enums_like_every_bundle(self): + # E3D High Flow passes because the engine's enum has it; TPU285 is a name no enum has. + self.preset("machine/M.json", vendor="BBL", extruder_type=["Direct Drive"], + extruder_variant_list=["Direct Drive Standard,Direct Drive E3D High Flow"], + printer_extruder_id=["1", "1"], + printer_extruder_variant=["Direct Drive Standard", + "Direct Drive E3D High Flow"]) + self.preset("process/P.json", vendor="BBL", instantiation="true", + print_extruder_variant=["Direct Drive TPU285"]) + errors, out = self.names("BBL") + self.assertEqual(errors, 1, out) + self.assertNotIn('holds "Direct Drive E3D High Flow"', out) + self.assertIn('"TPU285" is not a nozzle volume type the enum has', out) + + def test_a_list_may_not_name_one_variant_twice(self): + self.preset("filament/F.json", + filament_extruder_variant=["Direct Drive Standard", + "Direct Drive High Flow", + "Direct Drive Standard"]) + self.preset("machine/M.json", + extruder_variant_list=["Direct Drive Standard,Direct Drive Standard," + "Direct Drive High Flow"]) + self.preset("process/P.json", print_extruder_id=["1", "1", "1"], + print_extruder_variant=["Direct Drive Standard", "Direct Drive High Flow", + "Direct Drive Standard"]) + errors, out = self.names() + self.assertEqual(errors, 3, out) + self.assertIn('filament_extruder_variant lists "Direct Drive Standard" 2 times', out) + self.assertIn('extruder_variant_list extruder 1 lists "Direct Drive Standard" 2 ' + "times", out) + self.assertIn('print_extruder_variant lists the pair (extruder 1, "Direct Drive ' + 'Standard") 2 times', out) + + def test_one_variant_on_two_extruders_is_two_pairs_not_a_repeat(self): + self.preset("process/P.json", print_extruder_id=["1", "2"], + print_extruder_variant=["Direct Drive Standard", + "Direct Drive Standard"]) + self.assertEqual(self.names()[0], 0, self.names()[1]) + + def test_an_unknown_enum_value_fails_the_bundle(self): + self.preset("machine/M.json", extruder_type=["Direct Drive", "Magnetic Drive"], + nozzle_volume_type=["Turbo"], + default_nozzle_volume_type=["Fast Flow"]) + errors, out = self.names() + self.assertEqual(errors, 3, out) + self.assertIn('extruder_type "Magnetic Drive" is not one of (Bowden, Direct Drive)', + out) + self.assertIn('V/machine/M.json: nozzle_volume_type "Turbo" is not one of (E3D High ' + "Flow, Extra High Flow, High Flow, Standard, TPU High Flow)", out) + self.assertIn('default_nozzle_volume_type "Fast Flow" is not one of (E3D High Flow, ' + "Extra High Flow, High Flow, Standard, TPU High Flow)", out) + + def test_a_file_no_list_references_is_not_judged(self): + # It never loads, so its variant names cannot reach anything; + # check_index_coverage reports the file itself. + self.t.write("V", "machine/M.json", {"type": "machine", "name": "M", + "printer_extruder_variant": ["Direct Drive Fast"]}) + self.assertEqual(self.names()[0], 0, self.names()[1]) + + def test_check_runs_it(self): + self.preset("filament/F.json", instantiation="false", + filament_extruder_variant=["Direct Drive Normal"]) + self.run_command("update-index") # so nothing but the name check can fail + rc, out = self.run_command("check") + self.assertEqual(rc, 1, out) + self.assertIn('holds the legacy variant "Direct Drive Normal"', out) + + class TestDispatch(TreeCase): def test_each_command_reaches_its_own_writer(self): self.t.write("V", "filament/A.json", {"type": "filament", "name": "A"}) for command, expected in (("normalize", "normalized"), + ("fix-variant", "resized"), ("trim", "unreferenced"), ("update-index", "vendor index")): with self.subTest(command=command): @@ -883,7 +1258,8 @@ class TestDispatch(TreeCase): def test_an_option_belongs_to_one_command_only(self): for argv in (["trim", "--force"], ["update-index", "--filament-id"], - ["check", "--profile-type", "filament"]): + ["check", "--profile-type", "filament"], + ["normalize", "--strict"]): with self.subTest(argv=argv): with self.assertRaises(SystemExit) as cm, \ contextlib.redirect_stdout(io.StringIO()), \ diff --git a/src/OrcaSlicer.cpp b/src/OrcaSlicer.cpp index 0c9bd0b1ee..33411e2f0d 100644 --- a/src/OrcaSlicer.cpp +++ b/src/OrcaSlicer.cpp @@ -28,6 +28,7 @@ #include #include #include +#include #if defined(__linux__) || defined(__LINUX__) #include @@ -1614,6 +1615,10 @@ int CLI::run(int argc, char **argv) ConfigOptionBool* allow_rotations_option = m_config.option("allow_rotations"); if (allow_rotations_option) allow_rotations = allow_rotations_option->value; + // Only an explicit --align-to-y-axis overrides the printer-structure default. + std::optional align_to_y_axis; + if (m_given_option_keys.count("align_to_y_axis") > 0) + align_to_y_axis = m_config.opt_bool("align_to_y_axis"); ConfigOptionBool* skip_modified_gcodes_option = m_config.option("skip_modified_gcodes"); if (skip_modified_gcodes_option) @@ -5298,7 +5303,9 @@ int CLI::run(int argc, char **argv) arrange_cfg.bed_shrink_x = BED_SHRINK_SEQ_PRINT; arrange_cfg.bed_shrink_y = BED_SHRINK_SEQ_PRINT; } - if (auto printer_structure_opt = m_print_config.option>("printer_structure")) { + if (align_to_y_axis.has_value()) { + arrange_cfg.align_to_y_axis = *align_to_y_axis; + } else if (auto printer_structure_opt = m_print_config.option>("printer_structure")) { arrange_cfg.align_to_y_axis = (printer_structure_opt->value == PrinterStructure::psI3); } @@ -5520,12 +5527,28 @@ int CLI::run(int argc, char **argv) //add the virtual object into unselect list if has partplate_list.preprocess_exclude_areas(unselected, enable_wrapping_detect); - if (used_filament_set.size() > 0) + // Filament ids given on the command line size the tower for STL input. A project + // records its filament use per plate, so count there and keep its tower positions. + const int plate_count = partplate_list.get_plate_count(); + const bool from_project = used_filament_set.empty(); + std::vector plate_filament_counts(plate_count, static_cast(used_filament_set.size())); + if (from_project) + for (int plate_index = 0; plate_index < plate_count; ++plate_index) + plate_filament_counts[plate_index] = static_cast(partplate_list.get_plate(plate_index)->get_extruders_under_cli(true, m_print_config).size()); + // A project only gets a tower the slicer will print: the prime tower enabled, and not + // a by-object print unless a smooth timelapse needs it, as the per-plate arrange decides. + const bool project_tower_allowed = m_print_config.option("enable_prime_tower", true)->value && + (is_smooth_timelapse || !arrange_cfg.is_seq_print); + const auto plate_needs_wipe_tower = [from_project, project_tower_allowed, is_smooth_timelapse](int filament_count) { + if (!from_project) + return filament_count > 0; + return project_tower_allowed && (filament_count > 1 || (filament_count > 0 && is_smooth_timelapse)); + }; + const int max_filament_count = plate_count > 0 ? *std::max_element(plate_filament_counts.begin(), plate_filament_counts.end()) : 0; + + if (plate_needs_wipe_tower(max_filament_count)) { //prepare the wipe tower - int plate_count = partplate_list.get_plate_count(); - int extruder_size = used_filament_set.size(); - auto printer_structure_opt = m_print_config.option>("printer_structure"); // This margin only pre-adjusts the default away from the near edges; // estimate_wipe_tower_polygon below computes the real clamped position. @@ -5561,7 +5584,11 @@ int CLI::run(int argc, char **argv) for (int bedid = 0; bedid < MAX_PLATE_COUNT; bedid++) { int plate_index_valid = std::min(bedid, plate_count - 1); - if (bedid < plate_count) { + // Overflow beds may receive objects from any plate, so size them for the busiest one. + const int extruder_size = bedid < plate_count ? plate_filament_counts[bedid] : max_filament_count; + if (!plate_needs_wipe_tower(extruder_size)) + continue; + if (bedid < plate_count && !from_project) { wipe_x_option->set_at(&wt_x_opt, plate_index_valid, 0); wipe_y_option->set_at(&wt_y_opt, plate_index_valid, 0); } @@ -5748,7 +5775,9 @@ int CLI::run(int argc, char **argv) arrange_cfg.bed_shrink_x = BED_SHRINK_SEQ_PRINT; arrange_cfg.bed_shrink_y = BED_SHRINK_SEQ_PRINT; } - if (auto printer_structure_opt = m_print_config.option>("printer_structure")) { + if (align_to_y_axis.has_value()) { + arrange_cfg.align_to_y_axis = *align_to_y_axis; + } else if (auto printer_structure_opt = m_print_config.option>("printer_structure")) { arrange_cfg.align_to_y_axis = (printer_structure_opt->value == PrinterStructure::psI3); } @@ -7015,6 +7044,12 @@ int CLI::run(int argc, char **argv) } } sliced_info.sliced_plates.push_back(sliced_plate_info); + } catch (const Slic3r::SlicingErrors &exs) { + const std::string message = print_fff ? print_fff->slicing_errors_message(exs) : std::string(exs.what()); + BOOST_LOG_TRIVIAL(error) << "found slicing or export error for partplate " << index+1 << ": " << message; + boost::nowide::cerr << message << std::endl; + record_exit_reson(outfile_dir, CLI_SLICING_ERROR, index+1, message, sliced_info); + flush_and_exit(CLI_SLICING_ERROR); } catch (const std::exception &ex) { BOOST_LOG_TRIVIAL(error) << "found slicing or export error for partplate "< + #include "libslic3r/Config.hpp" #include "libslic3r/Model.hpp" @@ -113,6 +115,8 @@ private: std::vector m_input_files; std::vector m_actions; std::vector m_transforms; + // Options the user typed; setup() fills the CLI's own options with defaults afterwards. + std::set m_given_option_keys; std::vector m_models; bool setup(int argc, char **argv); diff --git a/src/dev-utils/CMakeLists.txt b/src/dev-utils/CMakeLists.txt index 2cfce6a7c5..e718da9e83 100644 --- a/src/dev-utils/CMakeLists.txt +++ b/src/dev-utils/CMakeLists.txt @@ -28,6 +28,12 @@ if (ORCA_TOOLS) target_link_libraries(generate_system_cache libslic3r boost_headeronly) target_compile_definitions(generate_system_cache PRIVATE ${_DEV_DEFS}) + # profile_include_dump: prints what included templates contribute to a vendor's presets, + # to diff against the same tool built in BambuStudio. Built only on request. + add_executable(profile_include_dump EXCLUDE_FROM_ALL profile_include_dump.cpp) + target_link_libraries(profile_include_dump libslic3r boost_headeronly) + target_compile_definitions(profile_include_dump PRIVATE ${_DEV_DEFS}) + endif() # Function that adds source file encoding check to a target diff --git a/src/dev-utils/OrcaSlicer_profile_validator.cpp b/src/dev-utils/OrcaSlicer_profile_validator.cpp index 56acbaa732..4bb7eab64d 100644 --- a/src/dev-utils/OrcaSlicer_profile_validator.cpp +++ b/src/dev-utils/OrcaSlicer_profile_validator.cpp @@ -20,6 +20,7 @@ #include "libslic3r/Model.hpp" #include "libslic3r/TriangleMesh.hpp" #include "libslic3r/Utils.hpp" +#include #include #include #include @@ -32,6 +33,7 @@ #include #include #include +#include #include using namespace Slic3r; @@ -122,17 +124,19 @@ Vec2d printable_area_center(const DynamicPrintConfig &cfg) // Put the prime tower where the GUI and CLI would before slicing. The config default (x 15, y 220) // lies off any bed shallower than the tower, and generation rejects an off-plate tower instead of -// exporting it. Beside the centred cube, clear of the edge exclusion strips some beds carry, then -// pulled inside the printable outline by the tower's own estimated footprint, with a few mm of -// clearance so the conflict checker never sees the two touch. -void place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d ¢er) +// exporting it. Beside the cube at the bed centre, clear of the edge exclusion strips some beds +// carry, with a few mm of clearance so the conflict checker never sees the two touch. The cube and +// the tower's estimated footprint are then pulled inside the printable outline as one rigid pair: +// moving the tower alone would push it back onto the cube on a narrow bed. Returns that move for +// the cube. +Vec2d place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d ¢er) { const auto *area = cfg.option("printable_area"); if (area == nullptr || area->values.size() < 3) - return; + return Vec2d::Zero(); const WipeTowerFootprint footprint = estimate_wipe_tower_footprint(cfg, resolve_wipe_tower_type(cfg), {0, 1}, cfg.opt_float("layer_height"), 10.); if (footprint.depth < EPSILON) - return; + return Vec2d::Zero(); const double margin = WIPE_TOWER_MARGIN + footprint.brim_width; // The position is the tower's own origin; a rotated tower extends from it in another // direction, so place the rotated box's extents rather than the origin. @@ -143,43 +147,77 @@ void place_wipe_tower(DynamicPrintConfig &cfg, const Vec2d ¢er) const Vec2d size = unscale(local.max) - lo; Vec2d pos(center.x() + 5. + margin + 5. - lo.x(), center.y() - size.y() / 2. - lo.y()); box.translate(Point::new_scale(pos.x(), pos.y())); - const Vec2f move = WipeTower::move_box_inside_polygon(get_extents(box), Polygons{Polygon::new_scale(area->values)}, scaled(margin)); - pos += move.cast(); + // A bed too small for the pair keeps the cube at its centre and places the tower alone. + const Polygons bed{Polygon::new_scale(area->values)}; + const BoundingBox tower = get_extents(box); + BoundingBox pair = tower; + pair.merge(Point::new_scale(center.x() - 5., center.y() - 5.)); + pair.merge(Point::new_scale(center.x() + 5., center.y() + 5.)); + const Point room = get_extents(bed).size() - Point::new_scale(2. * margin, 2. * margin); + const bool rigid = pair.size().x() < room.x() && pair.size().y() < room.y(); + const Vec2d move = WipeTower::move_box_inside_polygon(rigid ? pair : tower, bed, scaled(margin)).cast(); + pos += move; cfg.option("wipe_tower_x", true)->values = {pos.x()}; cfg.option("wipe_tower_y", true)->values = {pos.y()}; + return rigid ? move : Vec2d::Zero(); } -// Slice one centered cube that switches from filament 1 to filament 2 partway up, so exactly one -// filament change fires, then export. The change drives the printer's own change_filament_gcode: on a -// single-nozzle machine it rides the AMS prime tower (append_tcr), on a multi-nozzle machine it routes -// through the nozzle swap (set_extruder / append_tcr2) - the engine picks the path from the printer's -// topology, so one model covers both. An undefined placeholder in any shipped custom g-code throws -// Slic3r::PlaceholderParserError from export. -std::string slice_two_color_cube_and_export(DynamicPrintConfig cfg, bool is_bbl) +// Slice cubes that switch from filament 1 to filament 2 partway up, so a filament change fires, then +// export. The change drives the printer's own change_filament_gcode: on a single-nozzle machine it rides +// the AMS prime tower (append_tcr), on a multi-nozzle machine it routes through the nozzle swap +// (set_extruder / append_tcr2) - the engine picks the path from the printer's topology, so one model +// covers both. The layer-by-layer slice also pauses at z 2 and runs the template custom g-code at z 7, so +// machine_pause_gcode and template_custom_gcode expand, and turns clumping detection on for a printer that +// ships wrapping_detection_gcode. The by-object slice prints two cubes in turn without a prime tower: +// printing_by_object_gcode fires before the second one, and the filament change goes through set_extruder. +// Either way the output file name is built after export, which expands filename_format with the final +// print statistics. An undefined placeholder in any shipped custom g-code throws +// Slic3r::PlaceholderParserError. +std::string slice_two_color_cube_and_export(DynamicPrintConfig cfg, bool is_bbl, bool by_object) { - const Vec2d center = printable_area_center(cfg); - place_wipe_tower(cfg, center); - TriangleMesh m = make_cube(10, 10, 10); - m.translate(float(center.x() - 5.), float(center.y() - 5.), 0.f); + const Vec2d center = printable_area_center(cfg); + std::vector cube_mins; + if (by_object) { + // By-object printing fires the hook only without a wipe tower, and rules out clumping detection and + // smooth timelapse. No skirt, so the two cubes' own skirts cannot overlap. + cfg.set_key_value("print_sequence", new ConfigOptionEnum(PrintSequence::ByObject)); + cfg.set_key_value("enable_prime_tower", new ConfigOptionBool(false)); + cfg.set_key_value("enable_wrapping_detection", new ConfigOptionBool(false)); + cfg.set_key_value("timelapse_type", new ConfigOptionEnum(tlTraditional)); + cfg.set_key_value("skirt_loops", new ConfigOptionInt(0)); + cube_mins = {center + Vec2d(-20., -5.), center + Vec2d(10., -5.)}; + } else { + // Clumping detection changes the tower footprint, so turn it on before placing the tower. + if (!cfg.opt_string("wrapping_detection_gcode").empty()) + cfg.set_key_value("enable_wrapping_detection", new ConfigOptionBool(true)); + cube_mins = {center - Vec2d(5., 5.) + place_wipe_tower(cfg, center)}; + } Model model; Print print; - ModelObject *obj = model.add_object(); - obj->name = "cube"; // populates [input_filename_base] the way a loaded model does - obj->add_volume(m); - obj->add_instance(); - // Filament 2 is used only above z=4, so the upper layers carry a single filament change. - DynamicPrintConfig range_config; - range_config.set_key_value("extruder", new ConfigOptionInt(2)); - // Every range must carry a layer_height; use the process's own so a fine nozzle (e.g. 0.15 mm - // printing ~0.1 mm layers) isn't forced to a height its extrusion width can't support - that - // trips Flow::with_spacing. - range_config.set_key_value("layer_height", new ConfigOptionFloat(cfg.opt_float("layer_height"))); - obj->layer_config_ranges[{4.0, 10.0}].assign_config(std::move(range_config)); - print.is_BBL_printer() = is_bbl; - obj->ensure_on_bed(); - print.auto_assign_extruders(obj); + for (const Vec2d &cube_min : cube_mins) { + TriangleMesh m = make_cube(10, 10, 10); + m.translate(static_cast(cube_min.x()), static_cast(cube_min.y()), 0.f); + ModelObject *obj = model.add_object(); + obj->name = "cube"; // populates [input_filename_base] the way a loaded model does + obj->add_volume(m); + obj->add_instance(); + // Filament 2 is used only above z=4, so the upper layers carry a single filament change. + DynamicPrintConfig range_config; + range_config.set_key_value("extruder", new ConfigOptionInt(2)); + // Every range must carry a layer_height; use the process's own so a fine nozzle (e.g. 0.15 mm + // printing ~0.1 mm layers) isn't forced to a height its extrusion width can't support - that + // trips Flow::with_spacing. + range_config.set_key_value("layer_height", new ConfigOptionFloat(cfg.opt_float("layer_height"))); + obj->layer_config_ranges[{4.0, 10.0}].assign_config(std::move(range_config)); + obj->ensure_on_bed(); + print.auto_assign_extruders(obj); + } + // Custom g-codes per print_z apply to layer-by-layer printing only (ToolOrdering::assign_custom_gcodes). + if (!by_object) + model.plates_custom_gcodes[model.curr_plate_index].gcodes = {{2., CustomGCode::PausePrint, 1, "", ""}, + {7., CustomGCode::Template, 1, "", ""}}; print.apply(model, cfg); print.validate(); @@ -194,6 +232,7 @@ std::string slice_two_color_cube_and_export(DynamicPrintConfig cfg, bool is_bbl) in.close(); boost::system::error_code ec; fs::remove(tmp, ec); + print.output_filename(); // names the export as the app does, expanding filename_format return out; } @@ -253,18 +292,119 @@ void install_slice_context_log_sink() logging::core::get()->add_sink(sink); } +// Size the filament slots for the current selection and build the config every slice uses. +DynamicPrintConfig slice_config(PresetBundle &bundle) +{ + // Grow to a 2nd filament so the cube can change colour; never shrink a multi-nozzle printer + // below its nozzle count, or full_config()'s flush-volume matrix no longer matches validate(). + const size_t nozzles = bundle.printers.get_selected_preset().config.option("nozzle_diameter")->size(); + bundle.set_num_filaments((unsigned int) std::max(2, nozzles)); + + // Mirror the app's manual filament->nozzle assignment for a multi-nozzle BBL printer: put each + // filament on its own nozzle and pin the map (fmmManual) so full_config() collapses every filament to + // the variant of the nozzle it actually prints from, and the engine keeps that assignment instead of + // auto-remapping it during process(). Without this the synthetic 2nd filament keeps nozzle 1's variant + // while the auto map moves it to nozzle 2 - harmless, but on the one printer whose nozzles differ in + // type (Direct Drive + Bowden) the mismatched lookup spams [error] lines. Single-nozzle and non-BBL + // printers keep the default map (their toolchange rides the AMS/tool-changer path unchanged). + const bool pin_filament_map = bundle.is_bbl_vendor() && nozzles > 1; + if (pin_filament_map) { + auto &fmap = bundle.project_config.option("filament_map", true)->values; + for (size_t i = 0; i < fmap.size(); ++i) + fmap[i] = int(i % nozzles) + 1; + } + + DynamicPrintConfig cfg = bundle.full_config(); + cfg.set_key_value("enable_prime_tower", new ConfigOptionBool(true)); // force a purge tower so the change is detectable + // The map above drives full_config()'s per-filament variant collapse; fmmManual on the sliced config + // stops process() from auto-remapping filaments back onto a different nozzle (which would re-introduce + // the variant mismatch this pinning avoids). + if (pin_filament_map) + cfg.set_key_value("filament_map_mode", new ConfigOptionEnum(fmmManual)); + + // full_config() grows filament_extruder_variant to one entry per filament, but because the synthetic + // 2nd filament is a duplicate of the first (set_num_filaments copies the same preset), it leaves + // filament_self_index at size 1. That makes update_values_to_printer_extruders_for_multiple_filaments + // fail to resolve the 2nd filament's variant - a benign fallback that spams [error] lines. A real + // 2-colour project ships filament_self_index = 1,2,...; mirror that so the sweep log stays clean. The + // slice output is unaffected: the duplicated filament's per-variant values are identical to the first. + if (auto *variants = cfg.option("filament_extruder_variant")) { + auto &self_index = cfg.option("filament_self_index", true)->values; + if (self_index.size() != variants->size()) { + self_index.resize(variants->size()); + for (size_t i = 0; i < self_index.size(); ++i) + self_index[i] = int(i) + 1; + } + } + return cfg; +} + +// Slice the current selection and log any failure against `what` (the printer, and the extra preset if +// any). With an outdir, the g-code is also saved there as ".gcode". Returns the g-code, or an +// empty string on failure. +std::string slice_selection(PresetBundle &bundle, const std::string &what, bool by_object, const std::string &outdir, const std::string &file_base) +{ + try { + const std::string out = slice_two_color_cube_and_export(slice_config(bundle), bundle.is_bbl_vendor(), by_object); + if (!outdir.empty() && !out.empty()) + save_string_file(fs::path(outdir) / (file_base + ".gcode"), out); + if (out.empty() || out.find("G1") == std::string::npos) { + BOOST_LOG_TRIVIAL(error) << what << " produced no g-code"; + return {}; + } + return out; + } catch (const std::exception &ex) { + BOOST_LOG_TRIVIAL(error) << what << " failed to slice: " << ex.what(); + return {}; + } +} + +// The templates a preset carries, as (key, text): every non-empty *_gcode text, and filename_format. Each +// value of a per-variant key counts, though a slice expands only the values of the variants its printer uses. +using Templates = std::set>; +Templates preset_templates(const DynamicPrintConfig &cfg) +{ + Templates out; + for (const std::string &key : cfg.keys()) { + if (key != "filename_format" && !boost::algorithm::ends_with(key, "_gcode")) + continue; + const ConfigOption *opt = cfg.option(key); + if (opt->type() == coString) { + if (const std::string &text = static_cast(opt)->value; !text.empty()) + out.emplace(key, text); + } else if (opt->type() == coStrings) { + for (const std::string &text : static_cast(opt)->values) + if (!text.empty()) + out.emplace(key, text); + } + } + return out; +} + // Slice-and-export a two-colour cube through every shipped printer (optionally scoped to one vendor via // -v). Unlike the static reference/placeholder checks, this expands every custom *_gcode - including // change_filament_gcode at the one filament change - against the printer's fully-resolved config, so -// undefined-placeholder / invalid-flow bugs surface here. Reports every offending printer and returns 1 -// if any failed, 0 otherwise. When outdir is non-empty, each printer's g-code is also written there as -// "__.gcode" for manual inspection. The sweep is SEQUENTIAL by necessity: -// Print::process() keeps process-global state, so slicing printers concurrently in one process races -// even with per-slice Model+Print. Load in validation mode so the vendors are read straight from the -p -// profiles dir (no data_dir/system tree) and -v scoping is honoured for free. +// undefined-placeholder / invalid-flow bugs surface here. PlaceholderParser::check_inactive_branches is +// set for the sweep, so the names in {if} branches a slice does not take must resolve too. +// +// Each printer is sliced with its own default process and filament. Every other compatible system +// process and filament whose templates (filename_format, filament_start_gcode, ...) no slice has expanded +// yet is then sliced once on that printer - a filament that compatible_prints limits to another process +// with that process - so each template text shipped in any system preset is expanded once. That check runs on the first compatible printer the sweep reaches only, in that printer's hook +// contexts: a value-dependent error on another printer, or a hook call site there that sets fewer +// variables (a multi-nozzle tool change, say), is not covered. The first printer shipping each +// printing_by_object_gcode also slices two cubes by object, the only way that hook fires. +// +// Reports every failure and returns 1 if any slice failed, 0 otherwise. When outdir is non-empty, each +// g-code is also written there as "__[__].gcode" for manual inspection. The +// sweep is SEQUENTIAL by necessity: Print::process() keeps process-global state, so slicing printers +// concurrently in one process races even with per-slice Model+Print. Load in validation mode so the +// vendors are read straight from the -p profiles dir (no data_dir/system tree) and -v scoping is honoured +// for free. int slice_all_printers(const std::string &vendor, const std::string &outdir) { install_slice_context_log_sink(); + PlaceholderParser::check_inactive_branches = true; if (!outdir.empty()) { boost::system::error_code ec; @@ -312,7 +452,16 @@ int slice_all_printers(const std::string &vendor, const std::string &outdir) std::cout << "Slicing " << printers.size() << " printer preset(s)" << (vendor.empty() ? "" : " for vendor " + vendor) << "..." << std::endl; - int failures = 0; + Templates covered; // the process and filament templates some slice has expanded + auto cover = [&covered](const Preset &preset) { + const Templates templates = preset_templates(preset.config); + covered.insert(templates.begin(), templates.end()); + }; + auto is_covered = [&covered](const Preset &preset) { + const Templates templates = preset_templates(preset.config); + return std::includes(covered.begin(), covered.end(), templates.begin(), templates.end()); + }; + int failures = 0, extra_processes = 0, extra_filaments = 0, by_object_slices = 0; for (const auto &[vendor_name, printer] : printers) { g_slice_context = vendor_name + " / " + printer; // tag every engine log line from this slice const bool selected = bundle.printers.select_preset_by_name(printer, /*force=*/true); @@ -336,76 +485,115 @@ int slice_all_printers(const std::string &vendor, const std::string &outdir) continue; } - // Grow to a 2nd filament so the cube can change colour; never shrink a multi-nozzle printer - // below its nozzle count, or full_config()'s flush-volume matrix no longer matches validate(). - const size_t nozzles = bundle.printers.get_selected_preset().config.option("nozzle_diameter")->size(); - bundle.set_num_filaments((unsigned int) std::max(2, nozzles)); - - // Mirror the app's manual filament->nozzle assignment for a multi-nozzle BBL printer: put each - // filament on its own nozzle and pin the map (fmmManual) so full_config() collapses every filament to - // the variant of the nozzle it actually prints from, and the engine keeps that assignment instead of - // auto-remapping it during process(). Without this the synthetic 2nd filament keeps nozzle 1's variant - // while the auto map moves it to nozzle 2 - harmless, but on the one printer whose nozzles differ in - // type (Direct Drive + Bowden) the mismatched lookup spams [error] lines. Single-nozzle and non-BBL - // printers keep the default map (their toolchange rides the AMS/tool-changer path unchanged). - const bool pin_filament_map = bundle.is_bbl_vendor() && nozzles > 1; - if (pin_filament_map) { - auto &fmap = bundle.project_config.option("filament_map", true)->values; - for (size_t i = 0; i < fmap.size(); ++i) - fmap[i] = int(i % nozzles) + 1; - } - - DynamicPrintConfig cfg = bundle.full_config(); - cfg.set_key_value("enable_prime_tower", new ConfigOptionBool(true)); // force a purge tower so the change is detectable - // The map above drives full_config()'s per-filament variant collapse; fmmManual on the sliced config - // stops process() from auto-remapping filaments back onto a different nozzle (which would re-introduce - // the variant mismatch this pinning avoids). - if (pin_filament_map) - cfg.set_key_value("filament_map_mode", new ConfigOptionEnum(fmmManual)); - - // full_config() grows filament_extruder_variant to one entry per filament, but because the synthetic - // 2nd filament is a duplicate of the first (set_num_filaments copies the same preset), it leaves - // filament_self_index at size 1. That makes update_values_to_printer_extruders_for_multiple_filaments - // fail to resolve the 2nd filament's variant - a benign fallback that spams [error] lines. A real - // 2-colour project ships filament_self_index = 1,2,...; mirror that so the sweep log stays clean. The - // slice output is unaffected: the duplicated filament's per-variant values are identical to the first. - if (auto *variants = cfg.option("filament_extruder_variant")) { - auto &self_index = cfg.option("filament_self_index", true)->values; - if (self_index.size() != variants->size()) { - self_index.resize(variants->size()); - for (size_t i = 0; i < self_index.size(); ++i) - self_index[i] = int(i) + 1; - } - } - - try { - const std::string out = slice_two_color_cube_and_export(cfg, bundle.is_bbl_vendor()); - if (!outdir.empty() && !out.empty()) { - const fs::path f = fs::path(outdir) / (sanitize_filename(vendor_name) + "__" + sanitize_filename(printer) + ".gcode"); - save_string_file(f, out); - } - if (out.empty() || out.find("G1") == std::string::npos) { - BOOST_LOG_TRIVIAL(error) << "Printer \"" << printer << "\" produced no g-code"; - ++failures; - } else if (out.find("CP TOOLCHANGE START") == std::string::npos) { - // The filament change never rode the tower, so change_filament_gcode was not exercised. - BOOST_LOG_TRIVIAL(error) << "Printer \"" << printer - << "\" sliced but the filament change never fired (no CP TOOLCHANGE START)"; - ++failures; - } - } catch (const std::exception &ex) { - BOOST_LOG_TRIVIAL(error) << "Printer \"" << printer << "\" failed to slice: " << ex.what(); + const std::string print_name = bundle.prints.get_selected_preset_name(); + const std::string filament_name = bundle.filaments.get_selected_preset_name(); + const std::string what = "Printer \"" + printer + "\""; + const std::string file_base = sanitize_filename(vendor_name) + "__" + sanitize_filename(printer); + if (const std::string out = slice_selection(bundle, what, false, outdir, file_base); out.empty()) + ++failures; + else if (out.find("CP TOOLCHANGE START") == std::string::npos) { + // The filament change never rode the tower, so change_filament_gcode was not exercised. + BOOST_LOG_TRIVIAL(error) << what << " sliced but the filament change never fired (no CP TOOLCHANGE START)"; ++failures; } + cover(bundle.prints.get_selected_preset()); + cover(bundle.filaments.get_selected_preset()); + + const std::string &by_object_gcode = bundle.printers.get_selected_preset().config.opt_string("printing_by_object_gcode"); + if (!by_object_gcode.empty() && covered.emplace("printing_by_object_gcode", by_object_gcode).second) { + ++by_object_slices; + g_slice_context = vendor_name + " / " + printer + " / by object"; + if (slice_selection(bundle, what + " printing by object", true, outdir, file_base + "__by_object").empty()) + ++failures; + } + + // The first process of this printer that compatible_prints lets an otherwise incompatible filament + // use, judged as update_compatible() would with that process selected; empty if there is none. + const PresetWithVendorProfile printer_with_vendor = bundle.printers.get_edited_preset_with_vendor_profile(); + auto limiting_process = [&bundle, &printer_with_vendor](const Preset &filament) -> std::string { + const auto *processes = filament.config.option("compatible_prints"); + if (processes == nullptr || processes->values.empty()) + return {}; + const PresetWithVendorProfile filament_with_vendor = bundle.filaments.get_preset_with_vendor_profile(filament); + if (!is_compatible_with_printer(filament_with_vendor, printer_with_vendor)) + return {}; + for (const std::string &name : processes->values) + if (const Preset *process = bundle.prints.find_preset(name); + process != nullptr && process->is_visible && process->is_compatible && + is_compatible_with_print(filament_with_vendor, bundle.prints.get_preset_with_vendor_profile(*process), printer_with_vendor)) + return name; + return {}; + }; + // The compatibility flags are still this printer's, from update_compatible() above, which judged the + // filaments against the printer's own process. A hidden preset cannot be selected, so it is counted, + // not sliced. + std::vector> extras; // (extra preset, process to slice it with) + size_t hidden = 0; + for (const PresetCollection *presets : {&bundle.prints, &bundle.filaments}) + for (const Preset &preset : presets->get_presets()) { + if (!preset.is_system || preset.is_default) + continue; + std::string process; + if (preset.is_compatible) + process = preset.type == Preset::TYPE_PRINT ? preset.name : print_name; + else if (preset.type == Preset::TYPE_FILAMENT) + process = limiting_process(preset); + if (process.empty() || is_covered(preset)) + continue; + if (preset.is_visible) + extras.emplace_back(&preset, process); + else + ++hidden; + } + if (hidden > 0) + BOOST_LOG_TRIVIAL(warning) << "Printer \"" << printer << "\": " << hidden + << " compatible system preset(s) with unexpanded templates are hidden and were not sliced"; + + // Each extra slice swaps one preset into the printer's own selection. update_compatible() is not + // run again: it could swap filament slots. The filament change is not required to ride the tower + // here (a vase-mode process has none): the printer's own slice above already expanded its hooks. + for (const auto &[preset, process] : extras) { + if (is_covered(*preset)) + continue; // an earlier extra slice expanded the same texts + const bool is_print = preset->type == Preset::TYPE_PRINT; + const std::string &filament = is_print ? filament_name : preset->name; + std::string extra = std::string(is_print ? "process" : "filament") + " \"" + preset->name + "\""; + if (!is_print && process != print_name) + extra += " and process \"" + process + "\""; + g_slice_context = vendor_name + " / " + printer + " / " + extra; + if (is_print) + ++extra_processes; + else + ++extra_filaments; + cover(*preset); + bundle.prints.select_preset_by_name(process, /*force=*/true); + bundle.filaments.select_preset_by_name(filament, /*force=*/true); + bundle.filament_presets.assign(1, bundle.filaments.get_selected_preset_name()); + bundle.update_multi_material_filament_presets(); + // select_preset_by_name() falls back to another preset, and still returns true, when it cannot select this one. + if (bundle.prints.get_selected_preset_name() != process || bundle.filaments.get_selected_preset_name() != filament) { + BOOST_LOG_TRIVIAL(error) << what << " could not select " << extra; + ++failures; + continue; + } + if (slice_selection(bundle, what + " with " + extra, false, outdir, file_base + "__" + sanitize_filename(preset->name)).empty()) + ++failures; + } + // Leave the printer's own selection for the next printer to start from, as without the extra slices. + bundle.prints.select_preset_by_name(print_name, /*force=*/true); + bundle.filaments.select_preset_by_name(filament_name, /*force=*/true); } g_slice_context.clear(); + const int slices = int(printers.size()) + extra_processes + extra_filaments + by_object_slices; + std::cout << "Sliced " << printers.size() << " printer preset(s), " << extra_processes << " more process preset(s), " + << extra_filaments << " more filament preset(s) and " << by_object_slices << " printer(s) by object" << std::endl; if (failures > 0) { - std::cout << failures << " of " << printers.size() << " printer preset(s) failed to slice" << std::endl; + std::cout << failures << " of " << slices << " slice(s) failed" << std::endl; std::cout << "Validation failed" << std::endl; return 1; } - std::cout << "All " << printers.size() << " printer preset(s) sliced successfully" << std::endl; + std::cout << "All " << slices << " slice(s) succeeded" << std::endl; std::cout << "Validation completed successfully" << std::endl; return 0; } @@ -424,8 +612,8 @@ int main(int argc, char* argv[]) #endif ("vendor,v", po::value()->default_value(""), "Vendor name. Optional, all profiles present in the folder will be validated if not specified") ("generate_presets,g", po::value()->default_value(false), "Generate user presets for mock test") - ("slice,s", po::bool_switch()->default_value(false), "Slice a two-colour cube through every printer to expand all custom g-code (catches placeholder/flow errors that static checks miss). Off unless this flag is present.") - ("outdir,o", po::value()->default_value(""), "With -s, also save each printer's g-code to this folder (as __.gcode) for manual inspection. Optional.") + ("slice,s", po::bool_switch()->default_value(false), "Slice a two-colour cube through every printer, and through every other system process and filament preset whose templates no printer's own slice expands, so every custom g-code and filename_format shipped is expanded, names in {if} branches not taken included (catches placeholder/flow errors that static checks miss). Off unless this flag is present.") + ("outdir,o", po::value()->default_value(""), "With -s, also save each slice's g-code to this folder (as __[__].gcode) for manual inspection. Optional.") ("check_filament_subtypes,f", po::bool_switch()->default_value(true), "Also flag printers with duplicate (ambiguous) filament subtypes. Off unless this flag is present.") ("log_level,l", po::value()->default_value(2), "Log level. Optional, default is 2 (warning). Higher values produce more detailed logs."); // clang-format on diff --git a/src/dev-utils/profile_include_dump.cpp b/src/dev-utils/profile_include_dump.cpp new file mode 100644 index 0000000000..f2486dedfc --- /dev/null +++ b/src/dev-utils/profile_include_dump.cpp @@ -0,0 +1,215 @@ +// Prints what the profile `include` key contributes to one vendor's system +// presets, so that the dump from OrcaSlicer and the one from BambuStudio can be +// diffed: the two copies of this file differ only in how they load the vendor. +// For every preset whose values pass through an included template, from its +// own file or an ancestor's, it prints the templates those files name, in the +// order they apply, then the loaded value of each key the templates set. Every +// line starts with the preset, so a plain diff names the preset of each +// difference. +#include "libslic3r/PresetBundle.hpp" +#include "libslic3r/Preset.hpp" +#include "libslic3r/Utils.hpp" + +#include +#include +#include "nlohmann/json.hpp" + +#include +#include +#include +#include +#include +#include + +using namespace Slic3r; +namespace fs = boost::filesystem; +using nlohmann::json; + +namespace { + +// What a sub-file states about where its values come from, and what it sets. +struct Entry +{ + std::string inherits; + std::vector includes; + std::vector keys; +}; + +// Sub-files by name, per section of the vendor index: `inherits` and `include` +// both resolve within a section. +using Sections = std::map>; + +json read_json(const fs::path &path) +{ + boost::nowide::ifstream in(path.string()); + if (!in) + throw std::runtime_error("Cannot read " + path.string()); + return json::parse(in); +} + +Sections read_vendor(const fs::path &dir, const std::string &vendor) +{ + // Keys that name and place a sub-file rather than set a value. + static const std::set metadata = {"name", "type", "from", "instantiation", "inherits", "include"}; + Sections sections; + const json index = read_json(dir / (vendor + ".json")); + for (const char *section : {"process_list", "filament_list", "machine_list"}) { + const auto list = index.find(section); + if (list == index.end()) + continue; + for (const json &item : *list) { + const json file = read_json(dir / vendor / item.at("sub_path").get()); + // A file without a name goes by its name in the index. + Entry &entry = sections[section][file.value("name", item.at("name").get())]; + entry.inherits = file.value("inherits", ""); + if (const auto include = file.find("include"); include != file.end()) { + if (include->is_string()) + entry.includes.push_back(include->get()); + else + for (const json &name : *include) + entry.includes.push_back(name.get()); + } + for (auto it = file.begin(); it != file.end(); ++it) + if (metadata.count(it.key()) == 0) + entry.keys.push_back(it.key()); + } + } + return sections; +} + +const PresetCollection &presets_of(const PresetBundle &bundle, const std::string §ion) +{ + if (section == "process_list") + return bundle.prints; + if (section == "filament_list") + return bundle.filaments; + return bundle.printers; +} + +size_t dump(const PresetBundle &bundle, const Sections §ions, std::ostream &out) +{ + size_t dumped = 0; + for (const auto &[section, entries] : sections) { + std::vector presets; + for (const Preset &preset : presets_of(bundle, section).get_presets()) + if (preset.is_system) + presets.push_back(&preset); + std::sort(presets.begin(), presets.end(), [](const Preset *a, const Preset *b) { return a->name < b->name; }); + for (const Preset *preset : presets) { + // The preset and its ancestors, root first: the order their includes apply in. + std::vector lineage; + for (auto it = entries.find(preset->name); it != entries.end() && lineage.size() <= entries.size(); + it = entries.find(it->second.inherits)) + lineage.insert(lineage.begin(), &it->second); + std::string templates; + std::set keys; + for (const Entry *entry : lineage) + for (const std::string &name : entry->includes) { + templates += (templates.empty() ? "" : "; ") + name; + if (const auto it = entries.find(name); it != entries.end()) + keys.insert(it->second.keys.begin(), it->second.keys.end()); + } + if (templates.empty()) + continue; + const std::string prefix = section.substr(0, section.find('_')) + " | " + preset->name + " | "; + out << prefix << "include = " << templates << "\n"; + for (const std::string &key : keys) + out << prefix << key << " = " << (preset->config.has(key) ? preset->config.opt_serialize(key) : "") << "\n"; + ++dumped; + } + } + return dumped; +} + +// Orca: load the vendor as the app does, against the filament library when the +// directory has one: parsed from its JSON files or, with from_cache, from the +// preset cache the app reads on every launch after the first. +void load_vendor(PresetBundle &bundle, const std::string &dir, const std::string &vendor, bool from_cache) +{ + const auto rule = ForwardCompatibilitySubstitutionRule::EnableSilent; + PresetBundle library; + const PresetBundle *base = nullptr; + if (fs::is_regular_file(fs::path(dir) / (std::string(PresetBundle::ORCA_FILAMENT_LIBRARY) + ".json"))) { + library.load_vendor_configs_from_json(dir, PresetBundle::ORCA_FILAMENT_LIBRARY, PresetBundle::LoadSystem, rule, nullptr, false); + base = &library; + } + if (!from_cache) { + bundle.load_vendor_configs_from_json(dir, vendor, PresetBundle::LoadSystem, rule, base, false); + return; + } + // Parse once to write .opc beside the profile, then load that + // cache into a clean bundle. Any cache already there goes first, so that a + // failed write cannot leave it to be loaded; one that was not there before + // goes again afterwards. + const fs::path cache = fs::path(dir) / (vendor + ".opc"); + const bool had_cache = fs::exists(cache); + fs::remove(cache); + PresetBundle parsed; + parsed.set_is_validation_mode(true); // parse the JSON: validation never serves a cache + parsed.set_generate_vendor_caches(true); + parsed.load_vendor_configs_from_json(dir, vendor, PresetBundle::LoadSystem, rule, base); + const bool loaded = bundle.load_vendor_cache(cache.string(), vendor, parsed.vendors.at(vendor).config_version, base); + if (!had_cache) + fs::remove(cache); + if (!loaded) + throw std::runtime_error("The preset cache " + cache.string() + " was not written or was rejected"); +} + +} // namespace + +int main(int argc, char *argv[]) +{ + const char *usage = "Usage: profile_include_dump -p -o [-v ] [-l ] [-c]\n" + " -v vendor to dump, BBL if omitted\n" + " -l log level, 0 (fatal) to 5 (trace); 1 if omitted\n" + " -c load the presets from the vendor's preset cache, generated first, not the JSON\n"; + std::string dir, output, vendor = "BBL"; + unsigned log_level = 1; + bool from_cache = false; + for (int i = 1; i < argc; ++i) { + const std::string arg = argv[i]; + if (arg == "-c") { + from_cache = true; + continue; + } + if (i + 1 == argc) { + std::cerr << usage; + return 1; + } + const std::string value = argv[++i]; + if (arg == "-p") + dir = value; + else if (arg == "-o") + output = value; + else if (arg == "-v") + vendor = value; + else if (arg == "-l" && value.size() == 1 && value[0] >= '0' && value[0] <= '5') + log_level = unsigned(value[0] - '0'); + else { + std::cerr << usage; + return 1; + } + } + if (dir.empty() || output.empty() || !fs::is_directory(dir)) { + std::cerr << usage; + return 1; + } + set_logging_level(log_level); + + try { + PresetBundle bundle; + load_vendor(bundle, dir, vendor, from_cache); + boost::nowide::ofstream out(output); + if (!out) + throw std::runtime_error("Cannot write " + output); + const size_t dumped = dump(bundle, read_vendor(dir, vendor), out); + out.close(); + if (!out) + throw std::runtime_error("Failed writing " + output); + std::cerr << "Dumped " << dumped << " " << vendor << " presets that include a template\n"; + } catch (const std::exception &ex) { + std::cerr << ex.what() << "\n"; + return 1; + } + return 0; +} diff --git a/src/libslic3r/AppConfig.cpp b/src/libslic3r/AppConfig.cpp index c8a2c4984d..cdcd9b4dec 100644 --- a/src/libslic3r/AppConfig.cpp +++ b/src/libslic3r/AppConfig.cpp @@ -224,6 +224,12 @@ void AppConfig::set_defaults() set("preview_dim_previous_layers_brightness", std::to_string(std::max(0, std::min(brightness, 99)))); } + // ORCA: view type the G-code preview opens with. "auto" keeps the automatic choice (Filament for + // multi material prints, Line Type for single material ones), "last" restores the view type the user + // picked last, any other value is a fixed view type name, see GCodeViewer::view_type_to_config_name(). + if (get("preview_default_view_type").empty()) + set("preview_default_view_type", "auto"); + if (get("filaments_area_preferred_count").empty()) set("filaments_area_preferred_count", "10"); @@ -303,6 +309,9 @@ void AppConfig::set_defaults() if (get(SETTING_OPENGL_REALISTIC_PHONG).empty()) set_bool(SETTING_OPENGL_REALISTIC_PHONG, true); + if (get(SETTING_OPENGL_REALISTIC_PREVIEW).empty()) + set_bool(SETTING_OPENGL_REALISTIC_PREVIEW, false); + if (get(SETTING_OPENGL_SHADING_MODEL).empty()) set(SETTING_OPENGL_SHADING_MODEL, "gouraud"); diff --git a/src/libslic3r/AppConfig.hpp b/src/libslic3r/AppConfig.hpp index 24a4c2069b..2eac9f5fc6 100644 --- a/src/libslic3r/AppConfig.hpp +++ b/src/libslic3r/AppConfig.hpp @@ -42,6 +42,7 @@ using namespace nlohmann; #define SETTING_OPENGL_PHONG_BASIC_PLATE_SHADOWS "opengl_phong_basic_plate_shadows" #define SETTING_OPENGL_PHONG_SSAO "opengl_phong_ssao" #define SETTING_OPENGL_PHONG_SMOOTH_NORMALS "opengl_phong_smooth_normals" +#define SETTING_OPENGL_REALISTIC_PREVIEW "opengl_realistic_preview" #define SETTING_PLUGIN_PAGES_VISIBLE_COUNT "plugin_pages_visible_count" #define PLUGIN_PAGES_VISIBLE_COUNT_MIN 1 diff --git a/src/libslic3r/Brim.cpp b/src/libslic3r/Brim.cpp index 9cee5a0e4b..8ba4dfb596 100644 --- a/src/libslic3r/Brim.cpp +++ b/src/libslic3r/Brim.cpp @@ -131,6 +131,7 @@ double getadhesionCoeff(const PrintObject* printObject) } double adhesionCoeff = 1; for (const ModelVolume* modelVolume : objectVolumes) { + if (modelVolume->is_precise_seam()) continue; // non-printing helper geometry for (auto iter = extrudersFirstLayer.begin(); iter != extrudersFirstLayer.end(); iter++) { if (modelVolume->extruder_id() == *iter) { if (Model::extruderParamsMap.find(modelVolume->extruder_id()) != Model::extruderParamsMap.end()) { diff --git a/src/libslic3r/CAD/CadDocument.cpp b/src/libslic3r/CAD/CadDocument.cpp index c20b636ae7..ea20ffd966 100644 --- a/src/libslic3r/CAD/CadDocument.cpp +++ b/src/libslic3r/CAD/CadDocument.cpp @@ -2673,10 +2673,10 @@ void CadDocument::apply_feature(TopoDS_Shape& result, bool& have_body, ridge = pipe.Shape(); have_ridge = !ridge.IsNull(); } + } catch (const Standard_Failure&) { + have_ridge = false; // OCCT failure — on OCCT >= 8 Standard_Failure derives from std::exception, so this handler must come first } catch (const std::exception&) { have_ridge = false; // fall back to the bare cylinder/bore below - } catch (const Standard_Failure&) { - have_ridge = false; // OCCT failure (not a std::exception) — must be caught here too } if (f.thread_internal) { diff --git a/src/libslic3r/CAD/GeometryEngine.cpp b/src/libslic3r/CAD/GeometryEngine.cpp index ede3924056..2b923938c2 100644 --- a/src/libslic3r/CAD/GeometryEngine.cpp +++ b/src/libslic3r/CAD/GeometryEngine.cpp @@ -15,6 +15,8 @@ #include #include #include +#include +#include #include #include #include diff --git a/src/libslic3r/CMakeLists.txt b/src/libslic3r/CMakeLists.txt index 413eb8b374..b27f58e699 100644 --- a/src/libslic3r/CMakeLists.txt +++ b/src/libslic3r/CMakeLists.txt @@ -259,6 +259,8 @@ set(lisbslic3r_sources GCode/RetractWhenCrossingPerimeters.hpp GCode/SeamPlacer.cpp GCode/SeamPlacer.hpp + GCode/PreciseSeam.cpp + GCode/PreciseSeam.hpp #GCodeSender.cpp #GCodeSender.hpp GCode/SmallAreaInfillFlowCompensator.cpp diff --git a/src/libslic3r/Config.cpp b/src/libslic3r/Config.cpp index c8d816b3a4..42d6970ad1 100644 --- a/src/libslic3r/Config.cpp +++ b/src/libslic3r/Config.cpp @@ -950,6 +950,9 @@ int ConfigBase::load_from_json(const std::string &file, ConfigSubstitutionContex } else if (!load_inherits_to_config && boost::iequals(it.key(), BBL_JSON_KEY_INHERITS)) { key_values.emplace(BBL_JSON_KEY_INHERITS, it.value()); + } + else if (!load_inherits_to_config && boost::iequals(it.key(), BBL_JSON_KEY_INCLUDES)) { + key_values.emplace(BBL_JSON_KEY_INCLUDES, it.value().dump()); } else if (boost::iequals(it.key(), ORCA_JSON_KEY_RENAMED_FROM)) { key_values.emplace(ORCA_JSON_KEY_RENAMED_FROM, it.value()); } else { diff --git a/src/libslic3r/Config.hpp b/src/libslic3r/Config.hpp index 6d23ec3770..52b16f9458 100644 --- a/src/libslic3r/Config.hpp +++ b/src/libslic3r/Config.hpp @@ -697,7 +697,8 @@ public: } } else { // Resize by duplicating the last value. - this->values.resize(n, this->values./*back*/front()); + T v = this->values./*back*/front(); + this->values.resize(n, v); } } } @@ -772,8 +773,10 @@ public: if (this->values.empty()) this->values.resize(rhs_vec->size()); - else - this->values.resize(rhs_vec->size(), this->values.front()); + else { + T v = this->values.front(); + this->values.resize(rhs_vec->size(), v); + } assert(default_index.size() == rhs_vec->size()); diff --git a/src/libslic3r/Emboss.cpp b/src/libslic3r/Emboss.cpp index 34d9a93590..38c035806c 100644 --- a/src/libslic3r/Emboss.cpp +++ b/src/libslic3r/Emboss.cpp @@ -990,6 +990,7 @@ EmbossStyles Emboss::get_font_list_by_enumeration() { std::vector font_names; EnumFontFamilies(hDC, (LPCTSTR) NULL, EnumFamCallBack, (LPARAM) &font_names); + ReleaseDC(NULL, hDC); EmbossStyles font_list; for (const std::wstring &font_name : font_names) { diff --git a/src/libslic3r/ExtrusionEntity.cpp b/src/libslic3r/ExtrusionEntity.cpp index 36955a19bd..bd45150a15 100644 --- a/src/libslic3r/ExtrusionEntity.cpp +++ b/src/libslic3r/ExtrusionEntity.cpp @@ -423,6 +423,74 @@ bool ExtrusionLoop::is_smooth(double angle_threshold, double min_arm_length) con return true; } +// The seam is inserted into the loop unless a vertex lies within the G-code resolution of it, so a +// loop can begin and end with a segment of a few micrometres. A plain loop stops there anyway; a +// scarf extrudes through both ends, and the planner nearly halts on a block that short. Drop the +// vertex next to the seam point instead, so the loop still starts and ends at the seam. A trimmed +// path loses its arc fitting; its geometry is unchanged, it just prints as line segments. +static void trim_seam_ends(ExtrusionPaths &paths, double tolerance) +{ + const auto shorter = [tolerance](const Point3 &a, const Point3 &b) { return (b - a).cast().norm() < tolerance; }; + + while (!paths.empty()) { + Points3 &points = paths.front().polyline.points; + if (points.size() < 2 || !shorter(points[0], points[1])) + break; + if (points.size() > 2) { + points.erase(points.begin() + 1); + paths.front().polyline.fitting_result.clear(); + } else if (paths.size() > 1) { + const Point3 seam = points.front(); + paths.erase(paths.begin()); + paths.front().polyline.points.front() = seam; + paths.front().polyline.fitting_result.clear(); + } else { + break; + } + } + + while (!paths.empty()) { + Points3 &points = paths.back().polyline.points; + if (points.size() < 2 || !shorter(points[points.size() - 2], points.back())) + break; + if (points.size() > 2) { + points.erase(points.end() - 2); + paths.back().polyline.fitting_result.clear(); + } else if (paths.size() > 1) { + const Point3 seam = points.back(); + paths.pop_back(); + paths.back().polyline.points.back() = seam; + paths.back().polyline.fitting_result.clear(); + } else { + break; + } + } +} + +// Split `polyline` where the scarf ramp ends. When the split would leave a remainder shorter +// than half a slope step before the next vertex, the ramp is extended to that vertex instead: +// a stub that short makes the motion planner slow down at the end of the ramp. Planners treat +// moves of a millimetre and more as ordinary, so the ramp never grows by more than that. +static void split_at_slope_end(const Polyline3 &polyline, double length, double slope_max_segment_length, Polyline3 &slope, Polyline3 &flat) +{ + const double snap_distance = std::min(0.5 * slope_max_segment_length, scale_(1.)); + double acc_length = 0.; + size_t line_idx = 0; + for (const Line3 &line : polyline.lines()) { + const double end_length = acc_length + line.length(); + if (end_length >= length) { + if (end_length - length < snap_distance) { + polyline.split_at_index(line_idx + 1, &slope, &flat); + return; + } + break; + } + acc_length = end_length; + ++line_idx; + } + polyline.split_at_length(length, &slope, &flat); +} + ExtrusionLoopSloped::ExtrusionLoopSloped(ExtrusionPaths& original_paths, double seam_gap, double slope_min_length, @@ -431,6 +499,14 @@ ExtrusionLoopSloped::ExtrusionLoopSloped(ExtrusionPaths& original_paths, ExtrusionLoopRole role) : ExtrusionLoop(role) { + // An eighth of a common line width: the path moves by less than that at the seam. + trim_seam_ends(original_paths, scale_(0.05)); + // The caller measured the loop before the trim; a scarf that covers the whole loop must still end at 1. + double trimmed_length = 0.; + for (const ExtrusionPath &path : original_paths) + trimmed_length += unscale_(path.length()); + slope_min_length = std::min(slope_min_length, trimmed_length); + // create slopes const auto add_slop = [this, slope_max_segment_length, seam_gap](const ExtrusionPath &path, const Polyline3 &poly, double ratio_begin, double ratio_end) { if (poly.empty()) { return; } @@ -487,12 +563,13 @@ ExtrusionLoopSloped::ExtrusionLoopSloped(ExtrusionPaths& original_paths, // Split current path into slope and non-slope part Polyline3 slope_path; Polyline3 flat_path; - path->polyline.split_at_length(scale_(remaining_length), &slope_path, &flat_path); + split_at_slope_end(path->polyline, scale_(remaining_length), slope_max_segment_length, slope_path, flat_path); add_slop(*path, slope_path, start_ratio, 1); start_ratio = 1; - paths.emplace_back(std::move(flat_path), *path); + if (flat_path.size() > 1) + paths.emplace_back(std::move(flat_path), *path); remaining_length = 0; } else { remaining_length -= path_len; diff --git a/src/libslic3r/Feature/FuzzySkin/FuzzySkin.cpp b/src/libslic3r/Feature/FuzzySkin/FuzzySkin.cpp index e5fbeb5cdb..be86e92245 100644 --- a/src/libslic3r/Feature/FuzzySkin/FuzzySkin.cpp +++ b/src/libslic3r/Feature/FuzzySkin/FuzzySkin.cpp @@ -464,6 +464,16 @@ void group_region_by_fuzzify(PerimeterGenerator& g) } } + g.fuzzy_supported_area.reset(); + if ((g.has_fuzzy_skin || g.has_fuzzy_hole) && g.lower_slices != nullptr) { + coord_t max_thickness = 0; + for (const auto& region : regions) + if (should_fuzzify(region.config, g.layer_id, 0, true) || should_fuzzify(region.config, g.layer_id, 0, false)) + max_thickness = std::max(max_thickness, region.config.thickness); + // Walls farther than a line width plus the noise amplitude from the layer below are bridging; keep them smooth. + g.fuzzy_supported_area = offset_ex(*g.lower_slices, float(g.ext_perimeter_flow.scaled_width() + max_thickness)); + } + if (regions.size() == 1) { // optimization g.regions_by_fuzzify.push_back({regions.front().config, {}}); return; @@ -560,13 +570,23 @@ static std::vector collect_merged_fuzzy_regions(const std::ve return merged_regions; } +// Afterwards an empty region means nothing to fuzzify, no longer full coverage. +static void restrict_to_supported(std::vector& merged_regions, const std::optional& supported) +{ + if (!supported) + return; + for (auto& merged_region : merged_regions) + merged_region.expolygons = merged_region.expolygons.empty() ? *supported : intersection_ex(merged_region.expolygons, *supported); +} + Polygon apply_fuzzy_skin(const Polygon& polygon, const PerimeterGenerator& perimeter_generator, const size_t loop_idx, const bool is_contour) { Polygon fuzzified; const auto slice_z = perimeter_generator.slice_z; const auto& regions = perimeter_generator.regions_by_fuzzify; - if (regions.size() == 1) { // optimization + const auto& supported = perimeter_generator.fuzzy_supported_area; + if (regions.size() == 1 && !supported) { // optimization const auto& config = regions.begin()->first; const bool fuzzify = should_fuzzify(config, perimeter_generator.layer_id, loop_idx, is_contour); if (!fuzzify) { @@ -590,7 +610,7 @@ Polygon apply_fuzzy_skin(const Polygon& polygon, const PerimeterGenerator& perim // Fast path: single merged region — apply directly without splitting if (merged_regions.size() == 1) { const auto& mr = merged_regions.front(); - if (mr.expolygons.empty()) { + if (mr.expolygons.empty() && !supported) { fuzzified = polygon; fuzzy_polyline(fuzzified.points, true, slice_z, *mr.config); return fuzzified; @@ -626,6 +646,8 @@ Polygon apply_fuzzy_skin(const Polygon& polygon, const PerimeterGenerator& perim if (!merged_regions[i].expolygons.empty() && !merged_regions[j].expolygons.empty()) merged_regions[i].expolygons = diff_ex(merged_regions[i].expolygons, merged_regions[j].expolygons); + restrict_to_supported(merged_regions, supported); + // Split the loops into lines with different config, and fuzzy them separately fuzzified = polygon; for (const auto& r : merged_regions) { @@ -689,7 +711,8 @@ void apply_fuzzy_skin(Arachne::ExtrusionLine* extrusion, const PerimeterGenerato const auto slice_z = perimeter_generator.slice_z; const auto layer_height = perimeter_generator.layer_height; const auto& regions = perimeter_generator.regions_by_fuzzify; - if (regions.size() == 1) { // optimization + const auto& supported = perimeter_generator.fuzzy_supported_area; + if (regions.size() == 1 && !supported) { // optimization const auto& config = regions.begin()->first; const bool fuzzify = should_fuzzify(config, perimeter_generator.layer_id, extrusion->inset_idx, is_contour); if (fuzzify) @@ -703,7 +726,7 @@ void apply_fuzzy_skin(Arachne::ExtrusionLine* extrusion, const PerimeterGenerato if (!merged_regions.empty()) { // Fast path: single merged region — apply directly without splitting - if (merged_regions.size() == 1 && merged_regions.front().expolygons.empty()) { + if (merged_regions.size() == 1 && merged_regions.front().expolygons.empty() && !supported) { fuzzy_extrusion_line(extrusion->junctions, slice_z, perimeter_generator.layer_height, *merged_regions.front().config, closed); return; } @@ -753,6 +776,8 @@ void apply_fuzzy_skin(Arachne::ExtrusionLine* extrusion, const PerimeterGenerato if (!merged_regions[i].expolygons.empty() && !merged_regions[j].expolygons.empty()) merged_regions[i].expolygons = diff_ex(merged_regions[i].expolygons, merged_regions[j].expolygons); + restrict_to_supported(merged_regions, supported); + // Split the loops into lines with different config, and fuzzy them separately for (const auto& r : merged_regions) { const auto splitted = Algorithm::split_line(*extrusion, r.expolygons, false); diff --git a/src/libslic3r/Fill/FillAdaptive.cpp b/src/libslic3r/Fill/FillAdaptive.cpp index dbaa1f2ac9..809eddb218 100644 --- a/src/libslic3r/Fill/FillAdaptive.cpp +++ b/src/libslic3r/Fill/FillAdaptive.cpp @@ -1,3 +1,4 @@ +#include "../AABBTreeLines.hpp" #include "../ClipperUtils.hpp" #include "../ExPolygon.hpp" #include "../Surface.hpp" @@ -14,7 +15,9 @@ #include #include #include +#include #include +#include // Boost pool: Don't use mutexes to synchronize memory allocation. #define BOOST_POOL_NO_MT @@ -1318,6 +1321,564 @@ bool has_no_collinear_lines(const Polylines &polylines) } #endif +// Non-crossing centerlines for multiline adaptive cubic, see docs/HLSD/multiline-infill.md. +namespace noncrossing { + +// y = x() * x + y() in the frame where the sweep family is horizontal. +using Lin = Vec2d; + +static const Vec2d family_dir[3] { Vec2d(1., 0.), Vec2d(0.5, 0.5 * sqrt(3.)), Vec2d(0.5, -0.5 * sqrt(3.)) }; + +struct SweepLine +{ + Vec2d a, b; // a.x() < b.x() + int family; + Lin lin; + std::vector> junctions; // (x, junction) +}; + +struct Junction +{ + Vec2d p; + std::vector lines; + std::vector> pairs; // (left, right) line of each path through, bottom-up + std::vector> bends; // (path, bend) of each pair, -1 where it runs straight +}; + +struct LevelPath +{ + std::vector verts; // start, bends, end + std::vector lines; // line of each piece + std::vector junctions; // junction of each bend + std::vector turn; // 1 turning up, -1 turning down + std::vector> cuts; + std::vector> pushes; // (line, bend) keeping a wall away from a neighbour's cut + int start_term { -1 }; // junction where the path stops on another line, or -1 + int end_term { -1 }; +}; + +// Moves f onto line c (side 1: from below) wherever c lies beyond it, over the stretches overlapping [w0, w1]. +static void clip_profile(std::vector &f, const Lin &c, int side, double w0, double w1, double lim0, double lim1, bool cut_at_window, bool drop_past_limits) +{ + const double r0 = std::max(lim0, f.front().x()), r1 = std::min(lim1, f.back().x()); + if (r1 <= r0) + return; + const size_t ia = std::upper_bound(f.begin(), f.end(), r0, [](double x, const Vec2d &p) { return x < p.x(); }) - f.begin(); + const size_t ib = std::lower_bound(f.begin() + ia, f.end(), r1, [](const Vec2d &p, double x) { return p.x() < x; }) - f.begin(); + auto interpolate = [](const Vec2d &a, const Vec2d &b, double x) { return b.x() > a.x() ? a.y() + (x - a.x()) / (b.x() - a.x()) * (b.y() - a.y()) : b.y(); }; + std::vector local{ Vec2d(r0, interpolate(f[ia - 1], f[ia], r0)) }; + local.insert(local.end(), f.begin() + ia, f.begin() + ib); + local.emplace_back(r1, interpolate(f[ib - 1], f[ib], r1)); + + const double tol = 1.; + auto beyond = [&c, side, tol](const Vec2d &p) { return side * (c.x() * p.x() + c.y() - p.y()) - tol; }; + std::vector> stretches; + auto add = [&stretches](double x0, double x1) { + if (!stretches.empty() && stretches.back().second >= x0) + stretches.back().second = x1; + else + stretches.emplace_back(x0, x1); + }; + for (size_t i = 1; i < local.size(); ++i) { + const Vec2d &p = local[i - 1], &q = local[i]; + if (q.x() <= p.x()) + continue; + const double bp = beyond(p), bq = beyond(q); + if (bp > 0. && bq > 0.) + add(p.x(), q.x()); + else if (bp > 0. || bq > 0.) { + const double x = p.x() + bp / (bp - bq) * (q.x() - p.x()); + if (bp > 0.) + add(p.x(), x); + else + add(x, q.x()); + } + } + std::vector> keep; + for (auto [x0, x1] : stretches) { + if (x1 < w0 || x0 > w1) + continue; + if (drop_past_limits && ((x0 <= r0 && r0 == lim0) || (x1 >= r1 && r1 == lim1))) + continue; + keep.emplace_back(cut_at_window ? std::max(x0, w0) : x0, cut_at_window ? std::min(x1, w1) : x1); + } + if (keep.empty()) + return; + + auto y_local = [&](double x) { + size_t i = 1; + while (i + 1 < local.size() && local[i].x() < x) + ++i; + return interpolate(local[i - 1], local[i], x); + }; + std::vector out(f.begin(), f.begin() + ia); + auto push = [&out, tol](double x, double y) { + if (out.empty() || x > out.back().x() || std::abs(y - out.back().y()) > 2. * tol) + out.emplace_back(x, y); + }; + size_t k = 0; + for (const Vec2d &p : local) { + for (; k < keep.size() && keep[k].second < p.x(); ++k) { + const auto [x0, x1] = keep[k]; + push(x0, y_local(x0)); + push(x0, c.x() * x0 + c.y()); + push(x1, c.x() * x1 + c.y()); + push(x1, y_local(x1)); + } + if (k < keep.size() && keep[k].first <= p.x() && p.x() <= keep[k].second) + continue; + push(p.x(), p.y()); + } + for (; k < keep.size(); ++k) { + const auto [x0, x1] = keep[k]; + push(x0, y_local(x0)); + push(x0, c.x() * x0 + c.y()); + push(x1, c.x() * x1 + c.y()); + push(x1, y_local(x1)); + } + for (size_t i = ib; i < f.size(); ++i) + push(f[i].x(), f[i].y()); + f = std::move(out); +} + +static std::vector path_points(const LevelPath &path, const std::vector &lines, double reach) +{ + std::vector f = path.verts; + const int nb = int(path.junctions.size()); + auto x_of = [&path](int b) { return path.verts[b + 1].x(); }; + auto sharp = [&](int b) { return lines[path.lines[b]].family != 0 && lines[path.lines[b + 1]].family != 0; }; + // The run of bends turning the same way as bend b, up to the neighbouring bends turning the other way. + auto window = [&](int b) { + int l = b - 1, r = b + 1; + while (l >= 0 && path.turn[l] == path.turn[b]) + --l; + while (r < nb && path.turn[r] == path.turn[b]) + ++r; + return std::make_pair(l >= 0 ? x_of(l) : f.front().x(), r < nb ? x_of(r) : f.back().x()); + }; + // Sharp bends between the slanted lines go last, so they win at the tip of a small triangle. + for (int b = 0; b < nb; ++b) + if (!sharp(b)) { + const auto [w0, w1] = window(b); + for (const Lin &c : path.cuts[b]) + clip_profile(f, c, path.turn[b], w0, w1, x_of(b) - reach, x_of(b) + reach, true, false); + } + for (int b = 0; b < nb; ++b) + if (sharp(b)) + for (const Lin &c : path.cuts[b]) + clip_profile(f, c, path.turn[b], x_of(b), x_of(b), x_of(b) - reach, x_of(b) + reach, false, true); + for (const auto &[c, b] : path.pushes) { + const auto [w0, w1] = window(b); + clip_profile(f, c, path.turn[b], w0, w1, x_of(b) - reach, x_of(b) + reach, true, true); + } + std::vector pts; + for (const Vec2d &p : f) { + while (pts.size() >= 2 && std::abs(cross2(Vec2d(pts.back() - pts[pts.size() - 2]), Vec2d(p - pts.back()))) <= + 1e-9 * (pts.back() - pts[pts.size() - 2]).norm() * (p - pts.back()).norm()) + pts.pop_back(); + pts.push_back(p); + } + return pts; +} + +static double polyline_length(const std::vector &pts) +{ + double len = 0.; + for (size_t i = 1; i < pts.size(); ++i) + len += (pts[i] - pts[i - 1]).norm(); + return len; +} + +// Point at the given distance along pts, and the index of the segment it lies on. +static std::pair point_along(const std::vector &pts, double t) +{ + for (size_t i = 1; i < pts.size(); ++i) { + const double len = (pts[i] - pts[i - 1]).norm(); + if (t <= len) + return { pts[i - 1] + (len > 0. ? t / len : 0.) * (pts[i] - pts[i - 1]), i }; + t -= len; + } + return { pts.back(), pts.size() - 1 }; +} + +} // namespace noncrossing + +Polylines multiline_paths(const Lines &lines_in, double d1, double end_overlap, int sweep, const BoundingBox &cover) +{ + using namespace noncrossing; + const double eps = scale_(0.002); + const Eigen::Rotation2Dd to_sweep(-sweep * M_PI / 3.); + const BoundingBoxf box(cover.min.cast(), cover.max.cast()); + + // Lines in the sweep frame, collinear pieces merged. + struct Piece { double c, s0, s1; }; + std::array, 3> pieces; + for (const Line &line : lines_in) { + Vec2d a = line.a.cast(), b = line.b.cast(); + if (!Geometry::liang_barsky_line_clipping(a, b, box) || (b - a).norm() < 10. * eps) + continue; + a = to_sweep * a; + b = to_sweep * b; + const double angle = std::atan2(b.y() - a.y(), b.x() - a.x()) / (M_PI / 3.); + if (std::abs(angle - std::round(angle)) > 0.01) + // Not one of the three families. + return {}; + const int f = (int(std::round(angle)) % 3 + 3) % 3; + const Vec2d &d = family_dir[f]; + const Vec2d n(-d.y(), d.x()); + pieces[f].push_back({ n.dot(a), std::min(d.dot(a), d.dot(b)), std::max(d.dot(a), d.dot(b)) }); + } + std::vector lines; + for (int f = 0; f < 3; ++f) { + std::vector &ps = pieces[f]; + const Vec2d &d = family_dir[f]; + const Vec2d n(-d.y(), d.x()); + const double slope = d.y() / d.x(); + std::sort(ps.begin(), ps.end(), [](const Piece &l, const Piece &r) { return l.c < r.c; }); + for (size_t i = 0; i < ps.size();) { + size_t j = i + 1; + while (j < ps.size() && ps[j].c - ps[i].c < eps) + ++j; + std::sort(ps.begin() + i, ps.begin() + j, [](const Piece &l, const Piece &r) { return l.s0 < r.s0; }); + double c = 0.; + for (size_t k = i; k < j; ++k) + c += ps[k].c / double(j - i); + double s0 = ps[i].s0, s1 = ps[i].s1; + for (size_t k = i + 1; k <= j; ++k) { + if (k < j && ps[k].s0 <= s1 + eps) { + s1 = std::max(s1, ps[k].s1); + continue; + } + const Vec2d a = s0 * d + c * n; + lines.push_back({ a, s1 * d + c * n, f, Lin(slope, a.y() - slope * a.x()), {} }); + if (k < j) { + s0 = ps[k].s0; + s1 = ps[k].s1; + } + } + i = j; + } + } + + auto along = [](const SweepLine &l, const Vec2d &p) { return family_dir[l.family].dot(p - l.a); }; + auto length = [](const SweepLine &l) { return (l.b - l.a).norm(); }; + + // Crossings, including the ends of lines stopping on another line. + std::vector junctions; + auto detect_junctions = [&]() { + struct Hit { Vec2d p; int i, j; }; + std::vector hits; + std::vector order(lines.size()); + std::iota(order.begin(), order.end(), 0); + std::sort(order.begin(), order.end(), [&lines](int l, int r) { return lines[l].a.x() < lines[r].a.x(); }); + for (size_t oi = 0; oi < order.size(); ++oi) { + const SweepLine &li = lines[order[oi]]; + for (size_t oj = oi + 1; oj < order.size() && lines[order[oj]].a.x() <= li.b.x() + eps; ++oj) { + const SweepLine &lj = lines[order[oj]]; + if (li.family == lj.family) + continue; + const double x = (lj.lin.y() - li.lin.y()) / (li.lin.x() - lj.lin.x()); + const Vec2d p(x, li.lin.x() * x + li.lin.y()); + const double ti = along(li, p), tj = along(lj, p); + if (ti > -eps && ti < length(li) + eps && tj > -eps && tj < length(lj) + eps) + hits.push_back({ p, order[oi], order[oj] }); + } + } + std::sort(hits.begin(), hits.end(), [](const Hit &l, const Hit &r) { return l.p.x() < r.p.x(); }); + junctions.clear(); + for (const Hit &hit : hits) { + int found = -1; + for (int k = int(junctions.size()) - 1; k >= 0 && junctions[k].p.x() > hit.p.x() - eps; --k) + if (std::abs(junctions[k].p.y() - hit.p.y()) < eps) { + found = k; + break; + } + if (found < 0) { + found = int(junctions.size()); + junctions.push_back({ hit.p, {}, {}, {} }); + } + std::vector &jl = junctions[found].lines; + for (int li : { hit.i, hit.j }) + if (std::find(jl.begin(), jl.end(), li) == jl.end()) + jl.push_back(li); + } + for (SweepLine &l : lines) + l.junctions.clear(); + for (int ji = 0; ji < int(junctions.size()); ++ji) + for (int li : junctions[ji].lines) + lines[li].junctions.emplace_back(junctions[ji].p.x(), ji); + for (SweepLine &l : lines) + std::sort(l.junctions.begin(), l.junctions.end()); + }; + detect_junctions(); + auto has_arm = [&](int ji, int li, bool right) { + const double t = along(lines[li], junctions[ji].p); + return right ? t < length(lines[li]) - eps : t > eps; + }; + + // A line ending on another just past a crossing stops at the crossing, where its stub would leave a hole. + auto crosses = [&](int ji, int li) { return has_arm(ji, li, false) && has_arm(ji, li, true); }; + for (int pass = 0; pass < 3; ++pass) { + std::vector touched(lines.size(), false); + bool changed = false; + for (int ji = 0; ji < int(junctions.size()); ++ji) { + const Junction &J = junctions[ji]; + if (J.lines.size() != 2 || touched[J.lines[0]] || touched[J.lines[1]] || !crosses(ji, J.lines[0]) || !crosses(ji, J.lines[1])) + continue; + // Shortest arm of each line from J to the junction where it ends on another line. + struct DeadArm { double length; bool at_b; int end; }; + std::array dead; + dead.fill({ std::numeric_limits::max(), false, -1 }); + for (int k = 0; k < 2; ++k) { + const SweepLine &l = lines[J.lines[k]]; + const size_t at = std::find_if(l.junctions.begin(), l.junctions.end(), [ji](const std::pair &j) { return j.second == ji; }) - l.junctions.begin(); + const double t = along(l, J.p); + if (at + 1 < l.junctions.size() && length(l) - along(l, junctions[l.junctions[at + 1].second].p) < eps) + dead[k] = { length(l) - t, true, l.junctions[at + 1].second }; + if (at > 0 && along(l, junctions[l.junctions[at - 1].second].p) < eps && t < dead[k].length) + dead[k] = { t, false, l.junctions[at - 1].second }; + } + const int k = dead[0].length <= dead[1].length ? 0 : 1; + if (dead[k].length >= 2. * d1) + continue; + SweepLine &l = lines[J.lines[k]]; + (dead[k].at_b ? l.b : l.a) = J.p; + // Only the shortened line and those it ended on have stale junctions until the next pass. + for (int li : junctions[dead[k].end].lines) + touched[li] = true; + changed = true; + } + if (!changed) + break; + detect_junctions(); + } + + // At every crossing the lines bounce off each other, so that every path keeps running left to right. + for (int ji = 0; ji < int(junctions.size()); ++ji) { + Junction &J = junctions[ji]; + std::vector left, right; + for (int li : J.lines) + if (has_arm(ji, li, false) && has_arm(ji, li, true)) + left.push_back(li); + right = left; + std::sort(left.begin(), left.end(), [&lines](int l, int r) { return lines[l].lin.x() > lines[r].lin.x(); }); + std::sort(right.begin(), right.end(), [&lines](int l, int r) { return lines[l].lin.x() < lines[r].lin.x(); }); + for (size_t k = 0; k < left.size(); ++k) + J.pairs.emplace_back(left[k], right[k]); + J.bends.assign(J.pairs.size(), { -1, -1 }); + } + + std::vector paths; + for (int li = 0; li < int(lines.size()); ++li) { + const SweepLine &l = lines[li]; + const int start = !l.junctions.empty() && !has_arm(l.junctions.front().second, li, false) ? l.junctions.front().second : -1; + LevelPath path; + path.start_term = start; + path.verts.push_back(start >= 0 ? junctions[start].p : l.a); + path.lines.push_back(li); + int cur = li; + double x = path.verts.front().x(); + for (;;) { + const auto &js = lines[cur].junctions; + const auto it = std::find_if(js.begin(), js.end(), [x, eps](const std::pair &j) { return j.first > x + 0.25 * eps; }); + if (it == js.end()) { + path.verts.push_back(lines[cur].b); + break; + } + Junction &J = junctions[it->second]; + const size_t k = std::find_if(J.pairs.begin(), J.pairs.end(), [cur](const std::pair &p) { return p.first == cur; }) - J.pairs.begin(); + if (k == J.pairs.size()) { + path.verts.push_back(J.p); + path.end_term = it->second; + break; + } + if (const int next = J.pairs[k].second; next != cur) { + J.bends[k] = { int(paths.size()), int(path.junctions.size()) }; + path.verts.push_back(J.p); + path.lines.push_back(next); + path.junctions.push_back(it->second); + path.turn.push_back(lines[next].lin.x() > lines[cur].lin.x() ? 1 : -1); + cur = next; + } + x = it->first; + } + path.cuts.resize(path.junctions.size()); + paths.push_back(std::move(path)); + } + + // Cut the two bends of a crossing d1 apart, no further than the neighbouring bends turning the other way. + for (const Junction &J : junctions) { + if (J.pairs.size() < 2 || J.bends.front().first < 0 || J.bends.back().first < 0) + continue; + const Vec2d n = (family_dir[lines[J.pairs.back().second].family] - family_dir[lines[J.pairs.back().first].family]).normalized(); + auto cut = [&J, &n](double offset) { + const Vec2d q = J.p + offset * n; + const double s = -n.x() / n.y(); + return Lin(s, q.y() - s * q.x()); + }; + LevelPath &lo = paths[J.bends.front().first], &hi = paths[J.bends.back().first]; + const int lb = J.bends.front().second, hb = J.bends.back().second; + if (J.pairs.size() == 3) { + lo.cuts[lb].push_back(cut(-d1)); + hi.cuts[hb].push_back(cut(d1)); + continue; + } + // Only the tip of a small triangle, between the two slanted families, stops at its neighbouring bends. + const bool sharp = lines[J.pairs.front().first].family != 0 && lines[J.pairs.front().second].family != 0; + auto room = [&](const LevelPath &P, int b, int away, double sign) { + double c = std::numeric_limits::max(); + for (int nb : { b - 1, b + 1 }) + if (sharp && nb >= 0 && nb < int(P.junctions.size()) && P.turn[nb] == away) + c = std::min(c, sign * n.dot(junctions[P.junctions[nb]].p - J.p)); + if (b == 0 && P.start_term >= 0) + c = std::min(c, sign * n.dot(P.verts.front() - J.p)); + if (b + 1 == int(P.junctions.size()) && P.end_term >= 0) + c = std::min(c, sign * n.dot(P.verts.back() - J.p)); + return std::max(c, 0.); + }; + const double c_lo = room(lo, lb, 1, -1.), c_hi = room(hi, hb, -1, 1.); + double d_lo = 0.5 * d1; + if (d1 - c_hi <= c_lo) + d_lo = std::clamp(d_lo, d1 - c_hi, c_lo); + else if (c_lo + c_hi > 0.) + d_lo = d1 * c_lo / (c_lo + c_hi); + const double d_hi = d1 - d_lo; + lo.cuts[lb].push_back(cut(-d_lo)); + hi.cuts[hb].push_back(cut(d_hi)); + auto propagate = [&](const LevelPath &P, int b, int away, int step, double offset) { + for (int nb : { b - 1, b + 1 }) + if (nb >= 0 && nb < int(P.junctions.size()) && P.turn[nb] == away) { + const Junction &W = junctions[P.junctions[nb]]; + const int k = int(std::find_if(W.pairs.begin(), W.pairs.end(), [&](const std::pair &p) { return p.first == P.lines[nb]; }) - W.pairs.begin()) + step; + if (k >= 0 && k < int(W.bends.size()) && W.bends[k].first >= 0) + paths[W.bends[k].first].pushes.emplace_back(cut(offset), W.bends[k].second); + } + }; + if (sharp) { + propagate(lo, lb, 1, -1, -d_lo - d1); + propagate(hi, hb, -1, 1, d_hi + d1); + } + } + + std::vector> geometry; + Linesf segments; + std::vector> segment_start; // path, distance along it + std::vector> kept; // stretch of each path left by the trimming + for (const LevelPath &path : paths) { + geometry.push_back(path.junctions.empty() ? std::vector{ path.verts.front(), path.verts.back() } : path_points(path, lines, 4. * d1)); + double along_path = 0.; + for (size_t i = 1; i < geometry.back().size(); ++i) { + segments.emplace_back(geometry.back()[i - 1], geometry.back()[i]); + segment_start.emplace_back(int(geometry.size()) - 1, along_path); + along_path += (geometry.back()[i] - geometry.back()[i - 1]).norm(); + } + kept.emplace_back(0., along_path); + } + + // A path ending on another line stops end_overlap inside the walls of the others, as trimmed so far. + const double end_clearance = d1 - end_overlap; + AABBTreeLines::LinesDistancer tree(segments); + auto clearance = [&](int pi, const Vec2d &q) { + double dist = std::numeric_limits::max(); + for (size_t s : tree.all_lines_in_radius(q, d1)) { + const auto [pj, start] = segment_start[s]; + const Vec2d a = segments[s].a, d = segments[s].b - a; + const double len = d.norm(), t0 = std::max(0., kept[pj].first - start), t1 = std::min(len, kept[pj].second - start); + if (pj != pi && len > 0. && t0 <= t1) + dist = std::min(dist, line_alg::distance_to(Linef(a + t0 / len * d, a + t1 / len * d), q)); + } + return dist; + }; + // Returns the length trimmed off. + auto trim_front = [&](int pi, std::vector &pts) { + const double total = polyline_length(pts), step = d1 / 32.; + double t = 0.; + while (t <= total && clearance(pi, point_along(pts, t).first) < end_clearance) + t += step; + if (t > total) { + pts.clear(); + return total; + } + if (t == 0.) + return 0.; + for (double lo = std::max(0., t - step); t - lo > step / 256.;) + if (const double mid = 0.5 * (lo + t); clearance(pi, point_along(pts, mid).first) < end_clearance) + lo = mid; + else + t = mid; + const auto [q, seg] = point_along(pts, t); + pts.erase(pts.begin(), pts.begin() + (seg - 1)); + pts.front() = q; + return t; + }; + + // A path stopping on the line of another path is trimmed first, so that it gives way to that path. + std::vector>> carried(lines.size()); // x range and path of each piece + for (int pi = 0; pi < int(paths.size()); ++pi) + for (size_t i = 0; i < paths[pi].lines.size(); ++i) + carried[paths[pi].lines[i]].emplace_back(paths[pi].verts[i].x(), paths[pi].verts[i + 1].x(), pi); + std::vector> stopping_on(paths.size()); + for (int pi = 0; pi < int(paths.size()); ++pi) + for (const auto &[ji, own] : { std::make_pair(paths[pi].start_term, paths[pi].lines.front()), std::make_pair(paths[pi].end_term, paths[pi].lines.back()) }) + if (ji >= 0) + for (int li : junctions[ji].lines) + if (li != own) + for (const auto &[x0, x1, pj] : carried[li]) + if (pj != pi && x0 - eps <= junctions[ji].p.x() && junctions[ji].p.x() <= x1 + eps) + stopping_on[pj].push_back(pi); + std::vector order; + std::vector visited(paths.size(), false); + std::function visit = [&](int pi) { + if (visited[pi]) + return; + visited[pi] = true; + for (int child : stopping_on[pi]) + visit(child); + order.push_back(pi); + }; + for (int pi = 0; pi < int(paths.size()); ++pi) + visit(pi); + std::vector> trimmed(paths.size()); + auto trim = [&](int pi) { + std::vector &pts = trimmed[pi]; + if (paths[pi].start_term >= 0) + kept[pi].first += trim_front(pi, pts); + if (paths[pi].end_term >= 0 && !pts.empty()) { + std::reverse(pts.begin(), pts.end()); + kept[pi].second -= trim_front(pi, pts); + std::reverse(pts.begin(), pts.end()); + } + if (pts.size() < 2 || polyline_length(pts) < d1) { + pts.clear(); + kept[pi] = { 0., -1. }; + } + }; + // Ends grow back where the ends they gave way to were trimmed later; the last pass only shortens them. + for (int pass = 0; pass < 3; ++pass) + for (int pi : order) { + if (pass < 2) { + trimmed[pi] = geometry[pi]; + kept[pi] = { 0., polyline_length(geometry[pi]) }; + } else if (trimmed[pi].empty()) + continue; + trim(pi); + } + + Polylines out; + const Eigen::Rotation2Dd to_world = to_sweep.inverse(); + for (const std::vector &pts : trimmed) { + if (pts.empty()) + continue; + Polyline pl; + for (const Vec2d &p : pts) { + const Vec2d w = to_world * p; + pl.points.emplace_back(coord_t(std::round(w.x())), coord_t(std::round(w.y()))); + } + out.emplace_back(std::move(pl)); + } + return out; +} + void Filler::_fill_surface_single( const FillParams ¶ms, unsigned int thickness_layers, @@ -1371,6 +1932,17 @@ void Filler::_fill_surface_single( all_polylines.reserve(lines.size()); std::transform(lines.begin(), lines.end(), std::back_inserter(all_polylines), [](const Line& l) { return Polyline{ l.a, l.b }; }); + if (params.multiline > 1) { + const double d1 = scale_(this->spacing) * params.multiline; + BoundingBox cover = get_extents(expolygon); + cover.offset(coord_t(4. * d1)); + // Rotate the family the paths run along with the layer, like the other multiline patterns. + const int sweep = int((this->layer_id / std::max(thickness_layers, 1u)) % 3); + // Line ends overlap the walls they stop on by half a line, so that they bond. + if (Polylines paths = multiline_paths(lines, d1, 0.5 * scale_(this->spacing), sweep, cover); !paths.empty()) + all_polylines = std::move(paths); + } + // Apply multiline offset if needed multiline_fill(all_polylines, params, spacing); diff --git a/src/libslic3r/Fill/FillAdaptive.hpp b/src/libslic3r/Fill/FillAdaptive.hpp index 0132ffaa6c..de0768b26e 100644 --- a/src/libslic3r/Fill/FillAdaptive.hpp +++ b/src/libslic3r/Fill/FillAdaptive.hpp @@ -48,6 +48,9 @@ FillAdaptive::OctreePtr build_octree( // If true, octree is densified below internal overhangs only. bool support_overhangs_only); +// Multiline infill: lines of the three families to non-crossing paths d1 apart, ends reaching end_overlap into walls. +Polylines multiline_paths(const Lines &lines, double d1, double end_overlap, int sweep, const BoundingBox &cover); + // // Some of the algorithms used by class FillAdaptive were inspired by // Cura Engine's class SubDivCube diff --git a/src/libslic3r/Fill/FillRectilinear.cpp b/src/libslic3r/Fill/FillRectilinear.cpp index 7edf350081..998cfd9a7e 100644 --- a/src/libslic3r/Fill/FillRectilinear.cpp +++ b/src/libslic3r/Fill/FillRectilinear.cpp @@ -3047,12 +3047,55 @@ bool FillRectilinear::fill_surface_by_multilines(const Surface *surface, FillPar return true; } +// Upper level of a cubic band [0, h] over one period, from the crossing at (0, tau) to the one at (period, tau). +// See docs/HLSD/multiline-infill.md. +static std::vector cubic_upper_level(double tau, double h, double period, double d1) +{ + const double s3 = std::sqrt(3.); + const double y_cut = std::clamp(tau - 0.5 * d1, 0., h - d1) + d1; + const double y_flat = std::min(h, h + y_cut - 2. * d1); + const double x2 = (h - tau) / s3 + d1; + const double x3 = (h + tau) / s3 - d1; + // (slope, intercept) of the rising line, its chamfer, the horizontal line, the falling chamfer and line. + const std::array lines{ Vec2d(s3, tau), Vec2d(1. / s3, h - x2 / s3), Vec2d(0., y_flat), + Vec2d(-1. / s3, h + x3 / s3), Vec2d(-s3, tau + s3 * period) }; + auto y_at = [&lines, y_cut](double x) { + double y = std::numeric_limits::max(); + for (const Vec2d &l : lines) + y = std::min(y, l.x() * x + l.y()); + return std::max(y, y_cut); + }; + + std::vector xs; + for (size_t i = 0; i < lines.size(); ++i) { + if (lines[i].x() != 0.) + xs.emplace_back((y_cut - lines[i].y()) / lines[i].x()); + for (size_t j = i + 1; j < lines.size(); ++j) + xs.emplace_back((lines[j].y() - lines[i].y()) / (lines[i].x() - lines[j].x())); + } + xs.erase(std::remove_if(xs.begin(), xs.end(), [period](double x) { return x <= 1. || x >= period - 1.; }), xs.end()); + xs.insert(xs.end(), { 0., period }); + std::sort(xs.begin(), xs.end()); + xs.erase(std::unique(xs.begin(), xs.end(), [](double a, double b) { return b - a < 1.; }), xs.end()); + + std::vector pts; + for (double x : xs) { + const Vec2d p(x, y_at(x)); + if (pts.size() >= 2) { + const Vec2d &a = pts[pts.size() - 2], &b = pts.back(); + if (std::abs((b.y() - a.y()) / (b.x() - a.x()) - (p.y() - b.y()) / (p.x() - b.x())) < EPSILON) + pts.pop_back(); + } + pts.emplace_back(p); + } + return pts; +} + bool FillRectilinear::fill_surface_trapezoidal( const Surface* surface, FillParams params, - const std::initializer_list& sweep_params, Polylines& polylines_out, - int Pattern_type) // 0=grid, 1=triangular, 2=stars + int Pattern_type) // 0=grid, 1=triangular, 2=stars, 3=cubic { assert(params.multiline > 1); @@ -3082,9 +3125,20 @@ bool FillRectilinear::fill_surface_trapezoidal( expolygon.rotate(-base_angle, rotate_vector.second); } - // Use extended object bounding box for consistent pattern across layers - BoundingBox bb = this->extended_object_bounding_box(); const size_t infill_layer_id = (surface->thickness_layers > 0) ? this->layer_id / surface->thickness_layers : this->layer_id; + // The triangular family turns by 120 degrees every layer, about the origin of the frame it is built in. + const size_t layer_mod = infill_layer_id % 3; + const double angle = layer_mod * 2.0 * M_PI / 3.0; + + // Only build the rows over the surface, seen in the frame they are built in. + Polygon local = expolygon.contour; + if (Pattern_type != 0) { + local.translate(-rotate_vector.second.x(), -rotate_vector.second.y()); + if (layer_mod) + local.rotate(-angle); + } + BoundingBox cover = get_extents(local); + cover.offset(period); switch (Pattern_type) { case 0: // Grid / Trapezoidal @@ -3104,21 +3158,31 @@ bool FillRectilinear::fill_surface_trapezoidal( // Align bounding box to the grid, phased through the box center so separated infills align // each part on itself (grid_center is the origin for a standalone object / feature off). // Captured before the merge, which grows bb and would otherwise shift its center. + BoundingBox bb = this->extended_object_bounding_box(); const Point grid_center = bb.center(); bb.merge(align_to_grid(bb.min, Point(period, period), grid_center)); const coord_t xmin = bb.min.x(); - const coord_t xmax = bb.max.x(); const coord_t ymin = bb.min.y(); - const coord_t ymax = bb.max.y(); + + auto transpose = [&grid_center](const Point &p) { + return Point(grid_center.x() + p.y() - grid_center.y(), grid_center.y() + p.x() - grid_center.x()); + }; + if (infill_layer_id % 2 == 1) + cover = BoundingBox(transpose(cover.min), transpose(cover.max)); + const coord_t row_spacing = period / 2; + const coord_t first_x = xmin + (coord_t(std::floor(double(cover.min.x() - xmin) / period)) - 1) * period; + const coord_t last_x = xmin + (coord_t(std::ceil(double(cover.max.x() - xmin) / period)) + 1) * period; + const coord_t first_row = coord_t(std::floor(double(cover.min.y() - ymin) / row_spacing)) - 1; + const coord_t last_row = coord_t(std::ceil(double(cover.max.y() - ymin) / row_spacing)) + 1; // Create the two base row patterns once Polyline base_row_normal; - base_row_normal.points.reserve(((xmax - xmin) / period + 1) * 5); // 5 points per trapezoid + base_row_normal.points.reserve(((last_x - first_x) / period + 1) * 5); // 5 points per trapezoid Polyline base_row_flipped; - base_row_flipped.points.reserve(((xmax - xmin) / period + 1) * 5); // 5 points per trapezoid + base_row_flipped.points.reserve(((last_x - first_x) / period + 1) * 5); // 5 points per trapezoid - // Build complete rows from xmin to xmax - for (coord_t x = xmin; x < xmax; x += period) { + // Build rows on the same global period grid, limited to the surface cover. + for (coord_t x = first_x; x < last_x; x += period) { // Normal row base_row_normal.points.emplace_back(Point(x, d1 / 2)); // P0 base_row_normal.points.emplace_back(Point(x + d1 / 2, d1 / 2)); // P1 @@ -3134,13 +3198,14 @@ bool FillRectilinear::fill_surface_trapezoidal( } // Pre-allocate polylines - const size_t estimated_rows = ((ymax - ymin) / (period / 2) + 1); + const size_t estimated_rows = size_t(last_row - first_row + 1); polylines.reserve(estimated_rows); - bool flip_vertical = false; + bool flip_vertical = (first_row % 2) != 0; - // Now just copy and translate vertically - for (coord_t y = ymin; y < ymax; y += period / 2) { + // Copy and translate only rows intersecting the surface cover. + for (coord_t row = first_row; row <= last_row; ++row) { + const coord_t y = ymin + row * row_spacing; Polyline pl_row = flip_vertical ? base_row_flipped : base_row_normal; // Translate all points vertically @@ -3156,16 +3221,10 @@ bool FillRectilinear::fill_surface_trapezoidal( // Orca: mirror across the diagonal through grid_center (not the origin), so the swapped // layers stay aligned with the center-phased grid. For a standalone object / feature off, // grid_center is the origin and this is a plain x/y swap. - if (infill_layer_id % 2 == 1) { - for (Polyline& pl : polylines) { - for (Point& p : pl.points) { - const coord_t dx = p.x() - grid_center.x(); - const coord_t dy = p.y() - grid_center.y(); - p.x() = grid_center.x() + dy; - p.y() = grid_center.y() + dx; - } - } - } + if (infill_layer_id % 2 == 1) + for (Polyline& pl : polylines) + for (Point& p : pl.points) + p = transpose(p); break; } @@ -3186,40 +3245,24 @@ bool FillRectilinear::fill_surface_trapezoidal( const coord_t d2_tri = coord_t(2.0 / std::sqrt(3.0) * d1); const coord_t h = coord_t(0.5 * std::sqrt(3.0) * period); // height of triangle - // Align bounding box to the grid - bb.merge(align_to_grid(bb.center(), Point(period,h))); - const size_t layer_mod = infill_layer_id % 3; - const double angle = layer_mod * 2.0 * M_PI / 3.0; - - const Point rotation_center = bb.center(); - const coord_t half_w = bb.size().x() / 2; - const coord_t half_h = bb.size().y() / 2; - - // Compute how many full periods fit in each direction - const coord_t num_periods_x = coord_t(std::ceil(half_w / double(period))); - coord_t num_periods_y =coord_t(std::ceil(half_h / double(h))); - // Ensure an even number of rows so the pattern stays centered - if ((num_periods_y % 2) != 0) - ++num_periods_y; - - // Compute aligned limits (symmetric around the origin) - const coord_t x_min_aligned = -num_periods_x * period; - const coord_t x_max_aligned = num_periods_x * period; - const coord_t y_min_aligned = -num_periods_y * h; - const coord_t y_max_aligned = num_periods_y * h; + // Keep the existing origin-anchored lattice, but generate only nearby tiles. + const coord_t x_min_aligned = (coord_t(std::floor(double(cover.min.x()) / period)) - 1) * period; + const coord_t x_max_aligned = (coord_t(std::ceil(double(cover.max.x()) / period)) + 1) * period; + const coord_t first_row = coord_t(std::floor(double(cover.min.y()) / h)) - 1; + const coord_t last_row = coord_t(std::ceil(double(cover.max.y()) / h)) + 1; // Pre-allocate estimated number of polylines - const size_t estimated_rows = (y_max_aligned - y_min_aligned) / h + 2; - const size_t estimated_polylines = (estimated_rows + 1) * 2; // base line + trapezoid line per row + const size_t estimated_rows = size_t(last_row - first_row + 1); + const size_t estimated_polylines = estimated_rows * 2; // base line + trapezoid line per row polylines.reserve(estimated_polylines); // Create the two base row templates once Polyline base_line_template; base_line_template.points.reserve(2); // 2 points for base line Polyline trapezoid_row_normal; - trapezoid_row_normal.points.reserve(((x_max_aligned - x_min_aligned) / period + 1) * 5); // 5 points per trapezoid + trapezoid_row_normal.points.reserve(((x_max_aligned - x_min_aligned) / period) * 5); // 5 points per trapezoid Polyline trapezoid_row_shifted; - trapezoid_row_shifted.points.reserve(((x_max_aligned - x_min_aligned) / period + 1) * 5); // 5 points per trapezoid + trapezoid_row_shifted.points.reserve(((x_max_aligned - x_min_aligned) / period) * 5); // 5 points per trapezoid // Build base line template (from x_min_aligned to x_max_aligned) base_line_template.points.emplace_back(Point(x_min_aligned, 0)); base_line_template.points.emplace_back(Point(x_max_aligned, 0)); @@ -3239,10 +3282,10 @@ bool FillRectilinear::fill_surface_trapezoidal( for (auto& p : trapezoid_row_shifted.points) p.y() = h - p.y(); - bool shift_row = false; - // Generate pattern by copying and translating templates vertically - for (coord_t y = y_min_aligned; y < y_max_aligned; y += h) { + bool shift_row = (first_row % 2) != 0; + for (coord_t row = first_row; row <= last_row; ++row) { + const coord_t y = row * h; // Base line - copy and translate Polyline base_line = base_line_template; for (Point& p : base_line.points) { @@ -3262,12 +3305,6 @@ bool FillRectilinear::fill_surface_trapezoidal( shift_row = !shift_row; } - - // Rotate around origin (0,0) - if (layer_mod) - for (auto& pl : polylines) - pl.rotate(angle, Point(0,0)); - break; } @@ -3281,36 +3318,25 @@ bool FillRectilinear::fill_surface_trapezoidal( const coord_t d1_half_base = d1_half / std::sqrt(3.0); const coord_t half_period = period / 2; const coord_t quarter_period = period / 4; + const coord_t row_y_offset = tri_height - (2 * tri_height) / 3; - bb.merge(align_to_grid(bb.center(), Point(period, tri_height))); - const size_t layer_mod = infill_layer_id % 3; - const double angle = layer_mod * 2.0 * M_PI / 3.0; + // Keep the lattice anchored at the origin while generating only tiles around this surface. + const int64_t first_tile = int64_t(std::floor(double(cover.min.x()) / period)) - 1; + const int64_t last_tile = int64_t(std::ceil(double(cover.max.x()) / period)) + 1; + const int64_t first_row = int64_t(std::floor(double(cover.min.y() - row_y_offset) / hex_height)) - 1; + const int64_t last_row = int64_t(std::ceil(double(cover.max.y() - row_y_offset) / hex_height)) + 1; - const coord_t half_w = bb.size().x() / 2; - const coord_t half_h = bb.size().y() / 2; - - const coord_t num_periods_x = coord_t(std::ceil(half_w / double(period))); - coord_t num_periods_y = coord_t(std::ceil(half_h / double(hex_height))); - if ((num_periods_y % 2) != 0) - ++num_periods_y; - - const coord_t x_alignment_shift = half_period; - const coord_t y_alignment_shift = (2 * tri_height) / 3; - const coord_t x_min_aligned = -num_periods_x * period - x_alignment_shift; - const coord_t x_max_aligned = num_periods_x * period - x_alignment_shift; - const coord_t y_min_aligned = -num_periods_y * hex_height - y_alignment_shift; - const coord_t y_max_aligned = num_periods_y * hex_height - y_alignment_shift; - - const size_t estimated_rows = (y_max_aligned - y_min_aligned) / hex_height + 2; - const size_t estimated_polylines = (estimated_rows + 1) * 2; + const size_t estimated_rows = size_t(last_row - first_row + 1); + const size_t estimated_polylines = estimated_rows * 2; polylines.reserve(estimated_polylines); Polyline star_row_normal; - star_row_normal.points.reserve(((x_max_aligned - x_min_aligned) / period + 1) * 7); + star_row_normal.points.reserve(size_t(last_tile - first_tile) * 7); Polyline star_row_mirrored; - star_row_mirrored.points.reserve(((x_max_aligned - x_min_aligned) / period + 1) * 7); + star_row_mirrored.points.reserve(size_t(last_tile - first_tile) * 7); - for (coord_t x = x_min_aligned; x < x_max_aligned; x += period) { + for (int64_t tile = first_tile; tile < last_tile; ++tile) { + const coord_t x = coord_t(tile * period) - half_period; star_row_normal.points.emplace_back(Point(x, hex_height)); // P0 star_row_normal.points.emplace_back(Point(x + quarter_period - d1, hex_height)); // P1 star_row_normal.points.emplace_back(Point(x + quarter_period + d1_half, hex_height - chamfer_height)); // P2 @@ -3324,9 +3350,7 @@ bool FillRectilinear::fill_surface_trapezoidal( for (auto& p : star_row_mirrored.points) p.y() = hex_height - p.y(); - size_t pair_idx = 0; const coord_t global_x_shift = half_period; - const coord_t global_y_shift = tri_height; auto append_row_with_shift = [&polylines](const Polyline& row_template, coord_t x_shift, coord_t y_shift) { Polyline row = row_template; for (Point& p : row.points) { @@ -3337,16 +3361,46 @@ bool FillRectilinear::fill_surface_trapezoidal( polylines.emplace_back(std::move(row)); }; - for (coord_t y = y_min_aligned; y < y_max_aligned; y += hex_height, ++pair_idx) { - const coord_t x_shift = (pair_idx % 2 == 0) ? 0 : half_period; - append_row_with_shift(star_row_normal, x_shift + global_x_shift, y + global_y_shift); - append_row_with_shift(star_row_mirrored, x_shift + global_x_shift, y + global_y_shift); + for (int64_t row = first_row; row <= last_row; ++row) { + const coord_t y = coord_t(row * hex_height) + row_y_offset; + const coord_t x_shift = (row % 2 == 0) ? 0 : half_period; + append_row_with_shift(star_row_normal, x_shift + global_x_shift, y); + append_row_with_shift(star_row_mirrored, x_shift + global_x_shift, y); } + break; + } - if (layer_mod) - for (auto& pl : polylines) - pl.rotate(angle, Point(0, 0)); + case 3: // Cubic + { + // Same z shifted lines as the single-line cubic; the slanted ones cross tau above the horizontal ones. + auto pos_mod = [](double a, double m) { const double r = std::fmod(a, m); return r < 0. ? r + m : r; }; + const double h = 0.5 * std::sqrt(3.0) * period; + const double shift = scale_(std::sqrt(0.5) * this->z); + const double tau = pos_mod(-3. * shift, h); + const double y0 = pos_mod(-2. * shift, 2. * h); + std::array, 2> levels{ cubic_upper_level(h - tau, h, period, d1), cubic_upper_level(tau, h, period, d1) }; + for (Vec2d &p : levels.front()) + p.y() = h - p.y(); + + const int64_t n_min = int64_t(std::floor((cover.min.y() - y0) / h)) - 1; + const int64_t n_max = int64_t(std::ceil((cover.max.y() - y0) / h)) + 1; + polylines.reserve(size_t(n_max - n_min + 1) * levels.size()); + for (int64_t n = n_min; n <= n_max; ++n) { + const double x_off = (n & 1) ? 0.5 * period : 0.; + const double base = y0 + double(n) * h - tau; + const int64_t j_min = int64_t(std::floor((cover.min.x() - x_off) / period)) - 1; + const int64_t j_max = int64_t(std::ceil((cover.max.x() - x_off) / period)); + for (const std::vector &level : levels) { + Polyline row; + row.points.reserve(size_t(j_max - j_min + 1) * level.size()); + for (int64_t j = j_min; j <= j_max; ++j) + for (size_t i = (j == j_min) ? 0 : 1; i < level.size(); ++i) + row.points.emplace_back(coord_t(std::round(x_off + double(j * period) + level[i].x())), + coord_t(std::round(base + level[i].y()))); + polylines.emplace_back(std::move(row)); + } + } break; } @@ -3355,21 +3409,38 @@ bool FillRectilinear::fill_surface_trapezoidal( break; } - // Orca: cases 1 & 2 build the pattern symmetrically around the origin, so on their own they - // phase to the global origin and every part shares one grid. Shift the pattern onto the box - // center this->bounding_box carries, so separated infills align each part on itself. The center - // is the origin for a standalone object (or when the feature is off), making this a no-op there. + // Orca: cases 1 to 3 anchor the pattern at the origin, so on their own they phase to the global + // origin and every part shares one grid. Shift the pattern onto the box center + // this->bounding_box carries, so separated infills align each part on itself. The center is the + // origin for a standalone object (or when the feature is off), making the shift a no-op there. if (Pattern_type != 0) - for (Polyline &pl : polylines) + for (Polyline &pl : polylines) { + if (layer_mod) + pl.rotate(angle, Point(0, 0)); pl.translate(rotate_vector.second); + } // Orca: round the corners of the trapezoids. The straight base lines of the triangular family // have no corner to round. smooth_polylines_corners(polylines, params.smooth_factor, scaled(params.resolution)); + // Only the centerlines within d1 / 2 of the surface have outlines reaching it. + polylines = intersection_pl(std::move(polylines), offset(expolygon, float(d1 / 2))); + // Apply multiline fill multiline_fill(polylines, params, spacing); + // Start each outline on the cap at the first end of its path, outside the surface, so clipping splits it only there. + const Vec2d row_dir = Pattern_type != 0 ? Vec2d(std::cos(angle), std::sin(angle)) : infill_layer_id % 2 ? Vec2d::UnitY() : Vec2d::UnitX(); + for (Polyline &pl : polylines) + if (pl.size() > 3 && pl.first_point() == pl.last_point()) { + pl.points.pop_back(); + std::rotate(pl.points.begin(), std::min_element(pl.points.begin(), pl.points.end(), [&row_dir](const Point &a, const Point &b) { + return row_dir.dot(a.cast()) < row_dir.dot(b.cast()); + }), pl.points.end()); + pl.points.emplace_back(pl.points.front()); + } + // Contract surface polygon by half line width to avoid excesive overlap with perimeter ExPolygons contracted = offset_ex(expolygon, -float(scale_(0.5 * this->spacing))); @@ -3452,9 +3523,7 @@ Polylines FillGrid::fill_surface(const Surface *surface, const FillParams ¶m if (params.multiline > 1) { // Experimental trapezoidal grid if (!this->fill_surface_trapezoidal( - surface, params, - { { 0.f, 0.f }, { float(M_PI / 2.), 0.f } }, - polylines_out,0)) + surface, params, polylines_out, 0)) BOOST_LOG_TRIVIAL(error) << "FillGrid::fill_surface_trapezoidal() failed."; } else { @@ -3494,9 +3563,7 @@ Polylines FillTriangles::fill_surface(const Surface *surface, const FillParams & if (params.multiline > 1) { // Experimental trapezoidal grid if (!this->fill_surface_trapezoidal( - surface, params, - { { 0.f, 0.f }, { float(M_PI / 2.), 0.f } }, - polylines_out,1)) + surface, params, polylines_out, 1)) BOOST_LOG_TRIVIAL(error) << "FillGrid::fill_surface_trapezoidal() failed."; } else { @@ -3515,9 +3582,7 @@ Polylines FillStars::fill_surface(const Surface *surface, const FillParams ¶ Polylines polylines_out; if (params.multiline > 1) { if (!this->fill_surface_trapezoidal( - surface, params, - {{0.f, 0.f}, {float(M_PI / 3.), 0.f}, {float(2. * M_PI / 3.), float((3. / 2.) * this->spacing * params.multiline / params.density)}}, - polylines_out, 2)) + surface, params, polylines_out, 2)) BOOST_LOG_TRIVIAL(error) << "FillStars::fill_surface_trapezoidal() failed."; } else { if (! this->fill_surface_by_multilines( @@ -3532,6 +3597,11 @@ Polylines FillStars::fill_surface(const Surface *surface, const FillParams ¶ Polylines FillCubic::fill_surface(const Surface *surface, const FillParams ¶ms) { Polylines polylines_out; + if (params.multiline > 1) { + if (!this->fill_surface_trapezoidal(surface, params, polylines_out, 3)) + BOOST_LOG_TRIVIAL(error) << "FillCubic::fill_surface_trapezoidal() failed."; + return polylines_out; + } coordf_t dx = sqrt(0.5) * z; if (! this->fill_surface_by_multilines( surface, params, diff --git a/src/libslic3r/Fill/FillRectilinear.hpp b/src/libslic3r/Fill/FillRectilinear.hpp index 126cbe3a15..adb9ef5131 100644 --- a/src/libslic3r/Fill/FillRectilinear.hpp +++ b/src/libslic3r/Fill/FillRectilinear.hpp @@ -29,7 +29,7 @@ protected: float pattern_shift; }; bool fill_surface_by_multilines(const Surface *surface, FillParams params, const std::initializer_list &sweep_params, Polylines &polylines_out); - bool fill_surface_trapezoidal(const Surface *surface, FillParams params, const std::initializer_list &sweep_params, Polylines &polylines_out,int Pattern_type); + bool fill_surface_trapezoidal(const Surface *surface, FillParams params, Polylines &polylines_out, int Pattern_type); // The extended bounding box of the whole object that covers any rotation of every layer. BoundingBox extended_object_bounding_box() const; diff --git a/src/libslic3r/Format/3mf.cpp b/src/libslic3r/Format/3mf.cpp index 812e9f0154..738f1f5f6f 100644 --- a/src/libslic3r/Format/3mf.cpp +++ b/src/libslic3r/Format/3mf.cpp @@ -125,6 +125,10 @@ static constexpr const char* VOLUME_TYPE = "volume"; static constexpr const char* NAME_KEY = "name"; static constexpr const char* MODIFIER_KEY = "modifier"; static constexpr const char* VOLUME_TYPE_KEY = "volume_type"; +// Keep seam modes separate from the base type so older readers see a non-printing modifier. +static constexpr const char* PRECISE_SEAM_TYPE_KEY = "precise_seam_type"; +// Preserve dormant settings without turning an older reader's modifier into an active override. +static constexpr char PRECISE_SEAM_CONFIG_PREFIX[] = "precise_seam_config:"; static constexpr const char* MATRIX_KEY = "matrix"; static constexpr const char* SOURCE_FILE_KEY = "source_file"; static constexpr const char* SOURCE_OBJECT_ID_KEY = "source_object_id"; @@ -307,14 +311,17 @@ bool PrusaFileParser::check_3mf_from_prusa(const std::string filename) mz_zip_archive_file_stat stat; if (!mz_zip_reader_file_stat(&archive, model_file_index, &stat)) goto EXIT; + // expat sizes its buffer with an int, so a larger entry cannot be parsed in one piece. + if (stat.m_uncomp_size > static_cast(std::numeric_limits::max())) goto EXIT; - void *parser_buffer = XML_GetBuffer(m_parser, (int) stat.m_uncomp_size); + const int xml_size = static_cast(stat.m_uncomp_size); + void *parser_buffer = XML_GetBuffer(m_parser, xml_size); if (parser_buffer == nullptr) goto EXIT; - mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, (size_t) stat.m_uncomp_size, 0); + mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, static_cast(xml_size), 0); if (res == 0) goto EXIT; - XML_ParseBuffer(m_parser, (int) stat.m_uncomp_size, 1); + XML_ParseBuffer(m_parser, xml_size, 1); } } @@ -368,7 +375,14 @@ ModelVolumeType type_from_string(const std::string &s) if (s == "ParameterModifier") return ModelVolumeType::PARAMETER_MODIFIER; if (s == "SupportEnforcer") return ModelVolumeType::SUPPORT_ENFORCER; if (s == "SupportBlocker") return ModelVolumeType::SUPPORT_BLOCKER; - // Default value if invalud type string received. + // Precise Seam types (snake_case strings from ModelVolume::type_to_string) + if (s == "precise_seam_center") return ModelVolumeType::PRECISE_SEAM_CENTER; + if (s == "precise_seam_left") return ModelVolumeType::PRECISE_SEAM_LEFT; + if (s == "precise_seam_right") return ModelVolumeType::PRECISE_SEAM_RIGHT; + if (s == "precise_seam_enforced") return ModelVolumeType::PRECISE_SEAM_ENFORCED; + if (s == "precise_seam_blocked") return ModelVolumeType::PRECISE_SEAM_BLOCKED; + if (s == "precise_seam_neutral") return ModelVolumeType::PRECISE_SEAM_NEUTRAL; + // Default value if invalid type string received. return ModelVolumeType::MODEL_PART; } @@ -1346,19 +1360,26 @@ ModelVolumeType type_from_string(const std::string &s) XML_SetUserData(m_xml_parser, (void*)this); XML_SetElementHandler(m_xml_parser, _3MF_Importer::_handle_start_config_xml_element, _3MF_Importer::_handle_end_config_xml_element); - void* parser_buffer = XML_GetBuffer(m_xml_parser, (int)stat.m_uncomp_size); + // expat sizes its buffer with an int, so a larger entry cannot be parsed in one piece. + if (stat.m_uncomp_size > static_cast(std::numeric_limits::max())) { + add_error("Found invalid size"); + return false; + } + const int xml_size = static_cast(stat.m_uncomp_size); + + void* parser_buffer = XML_GetBuffer(m_xml_parser, xml_size); if (parser_buffer == nullptr) { add_error("Unable to create buffer"); return false; } - mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, (size_t)stat.m_uncomp_size, 0); + mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, static_cast(xml_size), 0); if (res == 0) { add_error("Error while reading config data to buffer"); return false; } - if (!XML_ParseBuffer(m_xml_parser, (int)stat.m_uncomp_size, 1)) { + if (!XML_ParseBuffer(m_xml_parser, xml_size, 1)) { char error_buf[1024]; ::sprintf(error_buf, "Error (%s) while parsing xml file at line %d", XML_ErrorString(XML_GetErrorCode(m_xml_parser)), (int)XML_GetCurrentLineNumber(m_xml_parser)); add_error(error_buf); @@ -2035,6 +2056,7 @@ ModelVolumeType type_from_string(const std::string &s) std::vector valid_keys = { "name", "volume_type", + PRECISE_SEAM_TYPE_KEY, "matrix", "source_file", "source_object_id", @@ -2047,7 +2069,7 @@ ModelVolumeType type_from_string(const std::string &s) }; auto itor = std::find(valid_keys.begin(), valid_keys.end(), key); - if (itor == valid_keys.end()) { + if (itor == valid_keys.end() && !(type == VOLUME_TYPE && boost::starts_with(key, PRECISE_SEAM_CONFIG_PREFIX))) { // do nothing if not valid keys return true; } @@ -2180,6 +2202,8 @@ ModelVolumeType type_from_string(const std::string &s) volume->mmu_segmentation_facets.shrink_to_fit(); volume->fuzzy_skin_facets.shrink_to_fit(); + // Apply the seam mode after all base-type metadata, regardless of XML key order. + ModelVolumeType precise_seam_type = ModelVolumeType::INVALID; // apply the remaining volume's metadata for (const Metadata& metadata : volume_data.metadata) { if (metadata.key == NAME_KEY) @@ -2188,6 +2212,10 @@ ModelVolumeType type_from_string(const std::string &s) volume->set_type(ModelVolumeType::PARAMETER_MODIFIER); else if (metadata.key == VOLUME_TYPE_KEY) volume->set_type(type_from_string(metadata.value)); + else if (metadata.key == PRECISE_SEAM_TYPE_KEY) + precise_seam_type = ModelVolume::type_from_string(metadata.value); + else if (boost::starts_with(metadata.key, PRECISE_SEAM_CONFIG_PREFIX)) + continue; // Restore dormant settings only after the final volume type is known. else if (metadata.key == SOURCE_FILE_KEY) volume->source.input_file = metadata.value; else if (metadata.key == SOURCE_OBJECT_ID_KEY) @@ -2208,6 +2236,22 @@ ModelVolumeType type_from_string(const std::string &s) volume->config.set_deserialize(metadata.key, metadata.value, config_substitutions); } + // Missing or unknown seam modes retain the ordinary modifier fallback. + // Ignore seam metadata on other base types; legacy inline seam types still load above. + if (volume->is_modifier() && is_precise_seam(precise_seam_type)) + volume->set_type(precise_seam_type); + + // Unknown seam modes must remain inert modifiers, even when dormant settings are present. + if (volume->is_precise_seam()) { + for (const Metadata& metadata : volume_data.metadata) { + if (boost::starts_with(metadata.key, PRECISE_SEAM_CONFIG_PREFIX)) { + const std::string key = metadata.key.substr(sizeof(PRECISE_SEAM_CONFIG_PREFIX) - 1); + if (!key.empty()) + volume->config.set_deserialize(key, metadata.value, config_substitutions); + } + } + } + // this may happen for 3mf saved by 3rd part softwares if (volume->name.empty()) { volume->name = object.name; @@ -3123,11 +3167,18 @@ ModelVolumeType type_from_string(const std::string &s) stream << " <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << NAME_KEY << "\" " << VALUE_ATTR << "=\"" << xml_escape(volume->name) << "\"/>\n"; // stores volume's modifier field (legacy, to support old slicers) - if (volume->is_modifier()) + // Readers with only the legacy flag still see helper geometry as a modifier. + if (volume->is_modifier() || volume->is_precise_seam()) stream << " <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << MODIFIER_KEY << "\" " << VALUE_ATTR << "=\"1\"/>\n"; - // stores volume's type (overrides the modifier field above) + // This Prusa-format reader uses ParameterModifier, not Bambu's modifier_part. + // The base type overrides the legacy flag, so it must also be backward-compatible. + // Use the same spelling for ordinary modifiers, including a downgraded seam helper. + const bool store_as_modifier = volume->is_modifier() || volume->is_precise_seam(); stream << " <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << VOLUME_TYPE_KEY << "\" " << - VALUE_ATTR << "=\"" << ModelVolume::type_to_string(volume->type()) << "\"/>\n"; + VALUE_ATTR << "=\"" << (store_as_modifier ? "ParameterModifier" : ModelVolume::type_to_string(volume->type())) << "\"/>\n"; + if (volume->is_precise_seam()) + stream << " <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << PRECISE_SEAM_TYPE_KEY << "\" " << + VALUE_ATTR << "=\"" << ModelVolume::type_to_string(volume->type()) << "\"/>\n"; // stores volume's local matrix stream << " <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << MATRIX_KEY << "\" " << VALUE_ATTR << "=\""; @@ -3162,7 +3213,12 @@ ModelVolumeType type_from_string(const std::string &s) // stores volume's config data for (const std::string& key : volume->config.keys()) { - stream << " <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << key << "\" " << VALUE_ATTR << "=\"" << volume->config.opt_serialize(key) << "\"/>\n"; + // Seam settings are inactive but must survive changing the helper back into a part/modifier. + const bool dormant = volume->is_precise_seam(); + const std::string stored_key = dormant ? PRECISE_SEAM_CONFIG_PREFIX + key : key; + const std::string value = volume->config.opt_serialize(key); + // Config serialization is C-style, not XML: escape active settings too, including tabs. + stream << " <" << METADATA_TAG << " " << TYPE_ATTR << "=\"" << VOLUME_TYPE << "\" " << KEY_ATTR << "=\"" << stored_key << "\" " << VALUE_ATTR << "=\"" << xml_escape_double_quotes_attribute_value(value) << "\"/>\n"; } // stores mesh's statistics diff --git a/src/libslic3r/Format/DRC.cpp b/src/libslic3r/Format/DRC.cpp index d489f04dba..c07655f69b 100644 --- a/src/libslic3r/Format/DRC.cpp +++ b/src/libslic3r/Format/DRC.cpp @@ -48,24 +48,37 @@ bool load_drc(const char *path, TriangleMesh *meshptr) indexed_triangle_set its; const PointAttribute *const positions = dracoMesh.GetNamedAttribute(GeometryAttribute::POSITION); + if (positions == nullptr) { + BOOST_LOG_TRIVIAL(error) << "load_drc: the mesh has no POSITION attribute"; + return false; + } size_t num_vertices = positions->size(); its.vertices.reserve(num_vertices); for (AttributeValueIndex i(0); i < num_vertices; ++ i) { float pos[3]; - positions->ConvertValue(i, 3, pos); + if (!positions->ConvertValue(i, 3, pos)) { + BOOST_LOG_TRIVIAL(error) << "load_drc: invalid vertex position"; + return false; + } its.vertices.emplace_back(pos[0], pos[1], pos[2]); } + // The Draco decoder does not check face indices against the point count. + const uint32_t num_points = dracoMesh.num_points(); size_t num_faces = dracoMesh.num_faces(); its.indices.reserve(num_faces); for (FaceIndex i(0); i < num_faces; ++ i) { - Mesh::Face face = dracoMesh.face(i); - - its.indices.emplace_back( - positions->mapped_index(face[0]).value(), - positions->mapped_index(face[1]).value(), - positions->mapped_index(face[2]).value() - ); + const Mesh::Face &face = dracoMesh.face(i); + stl_triangle_vertex_indices facet; + for (int k = 0; k < 3; ++ k) { + const size_t vertex_idx = face[k].value() < num_points ? positions->mapped_index(face[k]).value() : num_vertices; + if (vertex_idx >= num_vertices) { + BOOST_LOG_TRIVIAL(error) << "load_drc: invalid vertex index"; + return false; + } + facet[k] = static_cast(vertex_idx); + } + its.indices.emplace_back(facet); } *meshptr = TriangleMesh(std::move(its)); diff --git a/src/libslic3r/Format/OBJ.cpp b/src/libslic3r/Format/OBJ.cpp index 10abe8e4de..de91efb64d 100644 --- a/src/libslic3r/Format/OBJ.cpp +++ b/src/libslic3r/Format/OBJ.cpp @@ -166,10 +166,15 @@ bool load_obj(const char *path, TriangleMesh *meshptr, ObjInfo& obj_info, std::s obj_info.uv_map_pngs[face_index] = png_name; } if (data.textureCoordinates.size() > 0) { - Vec2f uv0(data.textureCoordinates[uvs[0] * 2], data.textureCoordinates[uvs[0] * 2 + 1]); - Vec2f uv1(data.textureCoordinates[uvs[1] * 2], data.textureCoordinates[uvs[1] * 2 + 1]); - Vec2f uv2(data.textureCoordinates[uvs[2] * 2], data.textureCoordinates[uvs[2] * 2 + 1]); - std::array uv_array{uv0, uv1, uv2}; + // A face vertex may omit vt or reference a missing one. Fall back to (0, 0) rather than + // skipping the face, so obj_info.uvs stays aligned with the face indices. + const int uv_count = static_cast(data.textureCoordinates.size() / OBJ_TEXCOORD_LENGTH); + auto uv_at = [&data, uv_count](int idx) -> Vec2f { + if (idx < 0 || idx >= uv_count) + return Vec2f::Zero(); + return Vec2f(data.textureCoordinates[idx * OBJ_TEXCOORD_LENGTH], data.textureCoordinates[idx * OBJ_TEXCOORD_LENGTH + 1]); + }; + std::array uv_array{uv_at(uvs[0]), uv_at(uvs[1]), uv_at(uvs[2])}; obj_info.uvs.emplace_back(uv_array); } obj_info.face_colors.emplace_back(face_color); diff --git a/src/libslic3r/Format/STEP.cpp b/src/libslic3r/Format/STEP.cpp index 22e39b207f..8305174e73 100644 --- a/src/libslic3r/Format/STEP.cpp +++ b/src/libslic3r/Format/STEP.cpp @@ -25,6 +25,7 @@ #include "XCAFDoc_DocumentTool.hxx" #include "XCAFDoc_ShapeTool.hxx" #include "XCAFApp_Application.hxx" +#include "TDF_LabelSequence.hxx" #include "TopoDS_Solid.hxx" #include "TopoDS_Compound.hxx" #include "TopoDS_Builder.hxx" diff --git a/src/libslic3r/Format/bbs_3mf.cpp b/src/libslic3r/Format/bbs_3mf.cpp index 09899aa4c2..160c169d69 100644 --- a/src/libslic3r/Format/bbs_3mf.cpp +++ b/src/libslic3r/Format/bbs_3mf.cpp @@ -353,6 +353,10 @@ static constexpr const char* PART_TYPE = "part"; static constexpr const char* NAME_KEY = "name"; static constexpr const char* VOLUME_TYPE_KEY = "volume_type"; static constexpr const char* PART_TYPE_KEY = "part_type"; +// Keep seam modes separate from the base type so older readers see a non-printing modifier. +static constexpr const char* PRECISE_SEAM_TYPE_KEY = "precise_seam_type"; +// Preserve dormant settings without turning an older reader's modifier into an active override. +static constexpr char PRECISE_SEAM_CONFIG_PREFIX[] = "precise_seam_config:"; static constexpr const char* MATRIX_KEY = "matrix"; static constexpr const char* SOURCE_FILE_KEY = "source_file"; static constexpr const char* SOURCE_OBJECT_ID_KEY = "source_object_id"; @@ -1629,7 +1633,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) } while (it != m_plater_data.end()) { - if (it->first > m_plater_data.size()) + if (it->first <= 0 || static_cast(it->first) > m_plater_data.size()) { add_error("invalid plate index"); return false; @@ -2312,7 +2316,7 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) } while (it != m_plater_data.end()) { - if (it->first > m_plater_data.size()) + if (it->first <= 0 || static_cast(it->first) > m_plater_data.size()) { add_error("invalid plate index"); return false; @@ -2508,19 +2512,26 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) XML_SetEntityDeclHandler(m_xml_parser, nullptr); XML_SetExternalEntityRefHandler(m_xml_parser, nullptr); - void* parser_buffer = XML_GetBuffer(m_xml_parser, (int)stat.m_uncomp_size); + // expat sizes its buffer with an int, so a larger entry cannot be parsed in one piece. + if (stat.m_uncomp_size > static_cast(std::numeric_limits::max())) { + add_error("Found invalid size"); + return false; + } + const int xml_size = static_cast(stat.m_uncomp_size); + + void* parser_buffer = XML_GetBuffer(m_xml_parser, xml_size); if (parser_buffer == nullptr) { add_error("Unable to create buffer"); return false; } - mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, (size_t)stat.m_uncomp_size, 0); + mz_bool res = mz_zip_reader_extract_file_to_mem(&archive, stat.m_filename, parser_buffer, static_cast(xml_size), 0); if (res == 0) { add_error("Error while reading config data to buffer"); return false; } - if (!XML_ParseBuffer(m_xml_parser, (int)stat.m_uncomp_size, 1)) { + if (!XML_ParseBuffer(m_xml_parser, xml_size, 1)) { char error_buf[1024]; ::snprintf(error_buf, 1024, "Error (%s) while parsing xml file at line %d", XML_ErrorString(XML_GetErrorCode(m_xml_parser)), (int)XML_GetCurrentLineNumber(m_xml_parser)); add_error(error_buf); @@ -5212,6 +5223,8 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) if (auto &tc = volume_data->text_configuration; tc.has_value()) volume->text_configuration = std::move(tc); + // Apply the seam mode after all base-type metadata, regardless of XML key order. + ModelVolumeType precise_seam_type = ModelVolumeType::INVALID; // apply the remaining volume's metadata for (const Metadata& metadata : volume_data->metadata) { if (metadata.key == NAME_KEY) @@ -5221,6 +5234,10 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) //for old format else if ((metadata.key == VOLUME_TYPE_KEY) || (metadata.key == PART_TYPE_KEY)) volume->set_type(ModelVolume::type_from_string(metadata.value)); + else if (metadata.key == PRECISE_SEAM_TYPE_KEY) + precise_seam_type = ModelVolume::type_from_string(metadata.value); + else if (boost::starts_with(metadata.key, PRECISE_SEAM_CONFIG_PREFIX)) + continue; // Restore dormant settings only after the final volume type is known. else if (metadata.key == SOURCE_FILE_KEY) volume->source.input_file = metadata.value; else if (metadata.key == SOURCE_OBJECT_ID_KEY) @@ -5243,6 +5260,22 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) volume->config.set_deserialize(metadata.key, metadata.value, config_substitutions); } + // Missing or unknown seam modes retain the ordinary modifier fallback. + // Ignore seam metadata on other base types; legacy inline seam types still load above. + if (volume->is_modifier() && is_precise_seam(precise_seam_type)) + volume->set_type(precise_seam_type); + + // Unknown seam modes must remain inert modifiers, even when dormant settings are present. + if (volume->is_precise_seam()) { + for (const Metadata& metadata : volume_data->metadata) { + if (boost::starts_with(metadata.key, PRECISE_SEAM_CONFIG_PREFIX)) { + const std::string key = metadata.key.substr(sizeof(PRECISE_SEAM_CONFIG_PREFIX) - 1); + if (!key.empty()) + volume->config.set_deserialize(key, metadata.value, config_substitutions); + } + } + } + // this may happen for 3mf saved by 3rd part softwares if (volume->name.empty()) { volume->name = object.name; @@ -8002,7 +8035,12 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) volume_id = m_volume_paths.find(volume)->second.second; stream << ID_ATTR << "=\"" << volume_id << "\" "; - stream << SUBTYPE_ATTR << "=\"" << ModelVolume::type_to_string(volume->type()) << "\">\n"; + // Older slicers must recognize the base type even when they ignore seam metadata. + const ModelVolumeType stored_type = volume->is_precise_seam() ? ModelVolumeType::PARAMETER_MODIFIER : volume->type(); + stream << SUBTYPE_ATTR << "=\"" << ModelVolume::type_to_string(stored_type) << "\">\n"; + if (volume->is_precise_seam()) + stream << " <" << METADATA_TAG << " " << KEY_ATTR << "=\"" << PRECISE_SEAM_TYPE_KEY << "\" " << VALUE_ATTR << "=\"" << + ModelVolume::type_to_string(volume->type()) << "\"/>\n"; //stream << " <" << PART_TAG << " " << ID_ATTR << "=\"" << it->second << "\" " << SUBTYPE_ATTR << "=\"" << ModelVolume::type_to_string(volume->type()) << "\">\n"; // stores volume's name @@ -8052,7 +8090,12 @@ void PlateData::parse_filament_info(GCodeProcessorResult *result) // stores volume's config data for (const std::string& key : volume->config.keys()) { - stream << " <" << METADATA_TAG << " "<< KEY_ATTR << "=\"" << key << "\" " << VALUE_ATTR << "=\"" << volume->config.opt_serialize(key) << "\"/>\n"; + // Seam settings are inactive but must survive changing the helper back into a part/modifier. + const bool dormant = volume->is_precise_seam(); + const std::string stored_key = dormant ? PRECISE_SEAM_CONFIG_PREFIX + key : key; + const std::string value = volume->config.opt_serialize(key); + // Config serialization is C-style, not XML: escape active settings too, including tabs. + stream << " <" << METADATA_TAG << " "<< KEY_ATTR << "=\"" << stored_key << "\" " << VALUE_ATTR << "=\"" << xml_escape_double_quotes_attribute_value(value) << "\"/>\n"; } if (const std::optional &es = volume->emboss_shape; es.has_value()) { diff --git a/src/libslic3r/Format/objparser.cpp b/src/libslic3r/Format/objparser.cpp index 886fa423bd..c5f33a7d0a 100644 --- a/src/libslic3r/Format/objparser.cpp +++ b/src/libslic3r/Format/objparser.cpp @@ -51,19 +51,18 @@ static bool obj_parseline(const char *line, ObjData &data) line = endptr; EATWS(); } - /*double w = 0; + // The optional w is accepted but not stored: only u and v are used. if (*line != 0) { - w = strtod(line, &endptr); + strtod(line, &endptr); if (endptr == 0 || (*endptr != ' ' && *endptr != '\t' && *endptr != 0)) return false; line = endptr; EATWS(); - }*/ + } if (*line != 0) return false; data.textureCoordinates.push_back((float)u); data.textureCoordinates.push_back((float)v); - //data.textureCoordinates.push_back((float)w); break; } case 'n': @@ -245,7 +244,7 @@ static bool obj_parseline(const char *line, ObjData &data) else -- vertex.normalIdx; if (vertex.textureCoordIdx < 0) - vertex.textureCoordIdx += (int)data.textureCoordinates.size() / 3; + vertex.textureCoordIdx += (int)data.textureCoordinates.size() / OBJ_TEXCOORD_LENGTH; else -- vertex.textureCoordIdx; data.vertices.push_back(vertex); diff --git a/src/libslic3r/Format/objparser.hpp b/src/libslic3r/Format/objparser.hpp index 58afd015a8..e711bdf6f4 100644 --- a/src/libslic3r/Format/objparser.hpp +++ b/src/libslic3r/Format/objparser.hpp @@ -92,6 +92,7 @@ inline bool operator==(const ObjSmoothingGroup &v1, const ObjSmoothingGroup &v2) } #define OBJ_VERTEX_COLOR_ALPHA 6 #define OBJ_VERTEX_LENGTH 7 // x, y, z, color_x,color_y,color_z,color_w +#define OBJ_TEXCOORD_LENGTH 2 // u, v #define ONE_FACE_SIZE 4//ONE_FACE format: f 8/4/6 7/3/6 6/2/6 -1/-1/-1 struct ObjData { // Version of the data structure for load / store in the private binary format. @@ -100,7 +101,7 @@ struct ObjData { // x, y, z, color_x,color_y,color_z,color_w std::vector coordinates; bool has_vertex_color{false}; - // u, v, w + // u, v std::vector textureCoordinates; // x, y, z std::vector normals; diff --git a/src/libslic3r/GCode.cpp b/src/libslic3r/GCode.cpp index 3e8a6478c6..8bbeb05514 100644 --- a/src/libslic3r/GCode.cpp +++ b/src/libslic3r/GCode.cpp @@ -8,6 +8,7 @@ #include "I18N.hpp" #include "GCode.hpp" #include "Exception.hpp" +#include "LifecycleEvents.hpp" #include "ExtrusionEntity.hpp" #include "EdgeGrid.hpp" #include "Geometry/ConvexHull.hpp" @@ -969,6 +970,27 @@ static std::vector get_path_of_change_filament(const Print& print) return gcode; } + // A folded tower layer is thicker than the object layer it sits on, so the height process_layer + // emitted is not the tower's. Both writers declare one, but each hardcodes a tag dialect - Type 1 + // forces s_IsBBLPrinter and writes "; LAYER_HEIGHT:", Type 2 writes ";HEIGHT:" - and the processor + // reads only its printer's, so a Type 1 tower on a non-BBL printer loses it and the merged layer + // is drawn and costed as a thin one. Declare it here, where the printer is known, unless the tower + // already wrote the right tag. _extrude puts the object's height back on the next object path, + // since process_layer forces the role to erWipeTower on any layer with a tower. + std::string WipeTowerIntegration::tower_height_tag(GCode &gcodegen, const WipeTower::ToolChangeResult &tcr, + const std::string &tcr_gcode) const + { + const std::string tag = ";" + GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Height); + if (! m_sparse_layers_combined || std::abs(gcodegen.m_last_height - tcr.layer_height) <= EPSILON || + tcr_gcode.find(tag) != std::string::npos) + return {}; + // Keep m_last_height what the G-code last declared, so a second visit does not repeat it. + gcodegen.m_last_height = tcr.layer_height; + char buf[64]; + sprintf(buf, "%s%g\n", tag.c_str(), tcr.layer_height); + return buf; + } + std::string WipeTowerIntegration::append_tcr(GCode& gcodegen, const WipeTower::ToolChangeResult& tcr, int new_filament_id, double z) const { if (new_filament_id != -1 && new_filament_id != tcr.new_tool) @@ -1466,6 +1488,7 @@ static std::vector get_path_of_change_filament(const Print& print) config.set_key_value("filament_start_gcode", new ConfigOptionString(start_filament_gcode_str)); std::string tcr_gcode, tcr_escaped_gcode = gcodegen.placeholder_parser_process("tcr_rotated_gcode", tcr_rotated_gcode, new_filament_id, &config); unescape_string_cstyle(tcr_escaped_gcode, tcr_gcode); + gcode += tower_height_tag(gcodegen, tcr, tcr_gcode); gcode += tcr_gcode; // Count the toolchange only when the emitted block really changed the tool — // tower visits without a filament change must not advance the ordinal. @@ -1798,6 +1821,7 @@ static std::vector get_path_of_change_filament(const Print& print) std::string tcr_gcode, tcr_escaped_gcode = gcodegen.placeholder_parser_process("tcr_rotated_gcode", tcr_rotated_gcode, new_extruder_id, &config); unescape_string_cstyle(tcr_escaped_gcode, tcr_gcode); + gcode += tower_height_tag(gcodegen, tcr, tcr_gcode); gcode += tcr_gcode; check_add_eol(toolchange_gcode_str); @@ -1945,7 +1969,8 @@ static std::vector get_path_of_change_filament(const Print& print) // Calculate where the wipe tower layer will be printed. -1 means that print z will not change, // resulting in a wipe tower with sparse layers. double wipe_tower_z = -1; - bool ignore_sparse = false; + // Folded into a later, thicker layer that prints at its own z: nothing to emit. + bool ignore_sparse = wipe_tower_layer_is_combined_away(m_tool_changes[m_layer_idx]); if (m_sparse_layers_skipped) { wipe_tower_z = m_last_wipe_tower_print_z; ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]) && m_layer_idx != 0; @@ -1963,7 +1988,8 @@ static std::vector get_path_of_change_filament(const Print& print) // Calculate where the wipe tower layer will be printed. -1 means that print z will not change, // resulting in a wipe tower with sparse layers. double wipe_tower_z = -1; - bool ignore_sparse = false; + // Folded into a later, thicker layer that prints at its own z: nothing to emit. + bool ignore_sparse = wipe_tower_layer_is_combined_away(m_tool_changes[m_layer_idx]); if (m_sparse_layers_skipped) { ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]); wipe_tower_z = m_compacted_tower_z[m_layer_idx]; @@ -1993,7 +2019,7 @@ static std::vector get_path_of_change_filament(const Print& print) if (m_layer_idx >= (int) m_tool_changes.size()) return true; - bool ignore_sparse = false; + bool ignore_sparse = wipe_tower_layer_is_combined_away(m_tool_changes[m_layer_idx]); if (m_sparse_layers_skipped) ignore_sparse = wipe_tower_layer_is_sparse(m_tool_changes[m_layer_idx]); @@ -2476,6 +2502,16 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu m_writer.set_is_bbl_machine(print->is_BBL_printer()); print->set_started(psGCodeExport); + { + LifecycleEventContext ctx; + ctx.id = std::to_string(print->model().id().id); + ctx.name = print->get_model_name(); + ctx.code = LifecycleEvtCode::Ok; + ctx.msg = path; + ctx.cancellation_check = [print]() { return print->canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportStarted, ctx); + } + // check if any custom gcode contains keywords used by the gcode processor to // produce time estimation and gcode toolpaths std::vector> validation_res = DoExport::validate_custom_gcode(*print); @@ -2511,12 +2547,24 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu m_processor.set_print(print); GCodeOutputStream file(boost::nowide::fopen(path_tmp.c_str(), "wb"), m_processor); if (! file.is_open()) { - BOOST_LOG_TRIVIAL(error) << std::string("G-code export to ") + path + " failed.\nCannot open the file for writing.\n" << std::endl; + std::string err_msg = std::string("G-code export to ") + path + " failed.\nCannot open the file for writing.\n"; + BOOST_LOG_TRIVIAL(error) << err_msg << std::endl; if (!fs::exists(folder)) { //fs::create_directory(folder); - BOOST_LOG_TRIVIAL(error) << "the parent path " + folder.string() +" is not there!!!" << std::endl; + std::string add_err_msg = "the parent path " + folder.string() +" is not there!!!"; + BOOST_LOG_TRIVIAL(error) << add_err_msg << std::endl; + err_msg += add_err_msg; } - throw Slic3r::RuntimeError(std::string("G-code export to ") + path + " failed.\nCannot open the file for writing.\n"); + { + LifecycleEventContext ctx; + ctx.id = std::to_string(print->model().id().id); + ctx.name = print->get_model_name(); + ctx.code = LifecycleEvtCode::Error; + ctx.msg = std::string(path) + "\n" + err_msg; + ctx.cancellation_check = [print]() { return print->canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportFinished, ctx); + } + throw Slic3r::RuntimeError(err_msg); } try { @@ -2527,11 +2575,20 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu boost::nowide::remove(path_tmp.c_str()); throw Slic3r::RuntimeError(std::string("G-code export to ") + path + " failed\nIs the disk full?\n"); } - } catch (std::exception & /* ex */) { + } catch (std::exception &ex) { // Rethrow on any exception. std::runtime_exception and CanceledException are expected to be thrown. // Close and remove the file. file.close(); boost::nowide::remove(path_tmp.c_str()); + { + LifecycleEventContext ctx; + ctx.id = std::to_string(print->model().id().id); + ctx.name = print->get_model_name(); + ctx.code = LifecycleEvtCode::Error; + ctx.msg = std::string(path) + "\n" + ex.what(); + ctx.cancellation_check = [print]() { return print->canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportFinished, ctx); + } throw; } file.close(); @@ -2637,6 +2694,15 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu std::error_code ret = rename_file(path_tmp, path); if (ret) { + { + LifecycleEventContext ctx; + ctx.id = std::to_string(print->model().id().id); + ctx.name = print->get_model_name(); + ctx.code = LifecycleEvtCode::Error; + ctx.msg = std::string(path) + "\nFailed to rename the output G-code file: " + ret.message(); + ctx.cancellation_check = [print]() { return print->canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportFinished, ctx); + } throw Slic3r::RuntimeError( std::string("Failed to rename the output G-code file from ") + path_tmp + " to " + path + '\n' + "error code " + ret.message() + '\n' + "Is " + path_tmp + " locked?" + '\n'); @@ -2647,7 +2713,17 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu BOOST_LOG_TRIVIAL(info) << "Exporting G-code finished" << log_memory_info(); print->set_done(psGCodeExport); - + + { + LifecycleEventContext ctx; + ctx.id = std::to_string(print->model().id().id); + ctx.name = print->get_model_name(); + ctx.code = LifecycleEvtCode::Ok; + ctx.msg = path; + ctx.cancellation_check = [print]() { return print->canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportFinished, ctx); + } + // Orca: label_object_enabled reflects whether objects are labeled in the g-code (EXCLUDE_OBJECT / // M486), which is driven by exclude_object for every printer if(result != nullptr) @@ -3024,162 +3100,6 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato if (m_config.small_area_infill_flow_compensation.value && !m_config.small_area_infill_flow_compensation_model.empty()) m_small_area_infill_flow_compensator = make_unique(print.config()); - // Process file_start_gcode - written at the very top of the file, before any header - { - std::string top_gcode_template = print.config().file_start_gcode.value; - if (!top_gcode_template.empty()) { - DynamicConfig top_config; - // file_start_gcode runs before the parser copy that normally restores these, so set them here. - PlaceholderParser::update_timestamp(top_config); - PlaceholderParser::update_user_name(top_config); - top_config.set_key_value("print_time_total_sec", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Total_Sec_Placeholder))); - top_config.set_key_value("print_time_day", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Day_Placeholder))); - top_config.set_key_value("print_time_hour", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Hour_Placeholder))); - top_config.set_key_value("print_time_minute", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Minute_Placeholder))); - top_config.set_key_value("print_time_sec", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Print_Time_Sec_Placeholder))); - top_config.set_key_value("used_filament_length", new ConfigOptionString(GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Used_Filament_Length_Placeholder))); - std::string top_gcode = print.placeholder_parser().process(top_gcode_template, 0, &top_config); - if (!top_gcode.empty()) - file.writeln(top_gcode); - } - } - - // Orca: Don't output Header block if BTT thumbnail is identified in the list - // Get the thumbnails value as a string - std::string thumbnails_value = print.config().option("thumbnails")->value; - // search string for the BTT_TFT label - bool has_BTT_thumbnail = (thumbnails_value.find("BTT_TFT") != std::string::npos); - - if(!has_BTT_thumbnail){ - file.write_format("; HEADER_BLOCK_START\n"); - // Write information on the generator. - file.write_format("; generated by %s on %s\n", Slic3r::header_slic3r_generated().c_str(), Slic3r::Utils::local_timestamp().c_str()); - if (is_bbl_printers) - file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Estimated_Printing_Time_Placeholder).c_str()); - //BBS: total layer number - file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Layer_Number_Placeholder).c_str()); - //Orca: extra check for bbl printer - if (is_bbl_printers) { - if (print.calib_params().mode == CalibMode::Calib_None) { // Don't support skipping in cali mode - // list all label_object_id with sorted order here - m_enable_exclude_object = true; - m_label_objects_ids.clear(); - m_label_objects_ids.reserve(print.num_object_instances()); - for (const PrintObject *print_object : print.objects()) - for (const PrintInstance &print_instance : print_object->instances()) - m_label_objects_ids.push_back(print_instance.model_instance->get_labeled_id()); - - std::sort(m_label_objects_ids.begin(), m_label_objects_ids.end()); - - std::string objects_id_list = "; model label id: "; - for (auto it = m_label_objects_ids.begin(); it != m_label_objects_ids.end(); it++) - objects_id_list += (std::to_string(*it) + (it != m_label_objects_ids.end() - 1 ? "," : "\n")); - file.writeln(objects_id_list); - } else { - m_enable_exclude_object = false; - m_label_objects_ids.clear(); - } - } - - { - std::string filament_density_list = "; filament_density: "; - (filament_density_list+=m_config.filament_density.serialize()) +='\n'; - file.writeln(filament_density_list); - - std::string filament_diameter_list = "; filament_diameter: "; - (filament_diameter_list += m_config.filament_diameter.serialize()) += '\n'; - file.writeln(filament_diameter_list); - - coordf_t max_height_z = -1; - for (const auto& object : print.objects()) - max_height_z = std::max(object->layers().back()->print_z, max_height_z); - - std::ostringstream max_height_z_tip; - max_height_z_tip<<"; max_z_height: " << std::fixed << std::setprecision(2) << max_height_z << '\n'; - file.writeln(max_height_z_tip.str()); - } - - { - auto used_filaments = print.get_slice_used_filaments(false); - std::ostringstream out; - out << "; filament: "; - for (size_t idx = 0; idx < used_filaments.size(); ++idx) { - if (idx != 0) - out << ','; - out << used_filaments[idx] + 1; - } - file.writeln(out.str()); - } - - file.write_format("; HEADER_BLOCK_END\n\n"); - } - - // BBS: write global config at the beginning of gcode file because printer - // need these config information - // Append full config, delimited by two 'phony' configuration keys - // CONFIG_BLOCK_START and CONFIG_BLOCK_END. The delimiters are structured - // as configuration key / value pairs to be parsable by older versions of - // PrusaSlicer G-code viewer. - { - if (is_bbl_printers && !skip_config_block) { - file.write("; CONFIG_BLOCK_START\n"); - std::string full_config; - append_full_config(print, full_config); - if (!full_config.empty()) - file.write(full_config); - - // SoftFever: write compatiple image - int first_layer_bed_temperature = get_bed_temperature(0, true, print.config().curr_bed_type); - file.write_format("; first_layer_bed_temperature = %d\n", - first_layer_bed_temperature); - file.write_format( - "; first_layer_temperature = %d\n", - print.config().nozzle_temperature_initial_layer.get_at(0)); - file.write("; CONFIG_BLOCK_END\n\n"); - } else if (thumbnail_cb != nullptr) { - // generate the thumbnails - auto [thumbnails, errors] = GCodeThumbnails::make_and_check_thumbnail_list(print.full_print_config()); - - if (errors != enum_bitmask()) { - std::string error_str = format("Invalid thumbnails value:"); - error_str += GCodeThumbnails::get_error_string(errors); - throw Slic3r::ExportError(error_str); - } - - if (!thumbnails.empty()) - GCodeThumbnails::export_thumbnails_to_file( - thumbnail_cb, print.get_plate_index(), thumbnails, [&file](const char* sz) { file.write(sz); }, [&print]() { print.throw_if_canceled(); }); - } - } - - - // Write some terse information on the slicing parameters. - const PrintObject *first_object = print.objects().front(); - const double layer_height = first_object->config().layer_height.value; - const double initial_layer_print_height = print.config().initial_layer_print_height.value; - for (size_t region_id = 0; region_id < print.num_print_regions(); ++ region_id) { - const PrintRegion ®ion = print.get_print_region(region_id); - file.write_format("; external perimeters extrusion width = %.2fmm\n", region.flow(*first_object, frExternalPerimeter, layer_height).width()); - file.write_format("; perimeters extrusion width = %.2fmm\n", region.flow(*first_object, frPerimeter, layer_height).width()); - file.write_format("; infill extrusion width = %.2fmm\n", region.flow(*first_object, frInfill, layer_height).width()); - file.write_format("; solid infill extrusion width = %.2fmm\n", region.flow(*first_object, frSolidInfill, layer_height).width()); - file.write_format("; top infill extrusion width = %.2fmm\n", region.flow(*first_object, frTopSolidInfill, layer_height).width()); - if (print.has_support_material()) - file.write_format("; support material extrusion width = %.2fmm\n", support_material_flow(first_object).width()); - if (print.config().initial_layer_line_width.value > 0) - file.write_format("; first layer extrusion width = %.2fmm\n", region.flow(*first_object, frPerimeter, initial_layer_print_height, true).width()); - file.write_format("\n"); - } - - file.write_format("; EXECUTABLE_BLOCK_START\n"); - - // SoftFever - if( m_enable_exclude_object) - file.write(set_object_info(&print)); - - // adds tags for time estimators - file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::First_Line_M73_Placeholder).c_str()); - // Prepare the helper object for replacing placeholders in custom G-code and output filename. m_placeholder_parser_integration.parser = print.placeholder_parser(); m_placeholder_parser_integration.parser.update_timestamp(); @@ -3314,16 +3234,6 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato // Orca: Initialise AdaptivePA processor filter m_pa_processor = std::make_unique(*this, tool_ordering.all_extruders()); - // Emit machine envelope limits for the Marlin firmware. - this->print_machine_envelope(file, print); - - // Disable fan. - if (m_config.auxiliary_fan.value && print.config().close_fan_the_first_x_layers.get_at(initial_extruder_id)) { - file.write(m_writer.set_fan(0)); - //BBS: disable additional fan - file.write(m_writer.set_additional_fan(0)); - } - // Update output variables after the extruders were initialized. m_placeholder_parser_integration.init(m_writer); @@ -3675,6 +3585,157 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato // Sync variant-mapped params into placeholder_parser before processing start gcode update_placeholder_parser_with_variant_params(); + // Expand the file header only after the start-up placeholders and writer state are ready. + // Use the regular custom G-code path so invalid placeholders report the template name. + if (!print.config().file_start_gcode.value.empty()) + file.writeln(this->placeholder_parser_process("file_start_gcode", print.config().file_start_gcode.value, initial_extruder_id)); + + // Orca: Don't output Header block if BTT thumbnail is identified in the list + // Get the thumbnails value as a string + std::string thumbnails_value = print.config().option("thumbnails")->value; + // search string for the BTT_TFT label + bool has_BTT_thumbnail = (thumbnails_value.find("BTT_TFT") != std::string::npos); + + if(!has_BTT_thumbnail){ + file.write_format("; HEADER_BLOCK_START\n"); + // Write information on the generator. + file.write_format("; generated by %s on %s\n", Slic3r::header_slic3r_generated().c_str(), Slic3r::Utils::local_timestamp().c_str()); + if (is_bbl_printers) + file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Estimated_Printing_Time_Placeholder).c_str()); + //BBS: total layer number + file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Total_Layer_Number_Placeholder).c_str()); + //Orca: extra check for bbl printer + if (is_bbl_printers) { + if (print.calib_params().mode == CalibMode::Calib_None) { // Don't support skipping in cali mode + // list all label_object_id with sorted order here + m_enable_exclude_object = true; + m_label_objects_ids.clear(); + m_label_objects_ids.reserve(print.num_object_instances()); + for (const PrintObject *print_object : print.objects()) + for (const PrintInstance &print_instance : print_object->instances()) + m_label_objects_ids.push_back(print_instance.model_instance->get_labeled_id()); + + std::sort(m_label_objects_ids.begin(), m_label_objects_ids.end()); + + std::string objects_id_list = "; model label id: "; + for (auto it = m_label_objects_ids.begin(); it != m_label_objects_ids.end(); it++) + objects_id_list += (std::to_string(*it) + (it != m_label_objects_ids.end() - 1 ? "," : "\n")); + file.writeln(objects_id_list); + } else { + m_enable_exclude_object = false; + m_label_objects_ids.clear(); + } + } + + { + std::string filament_density_list = "; filament_density: "; + (filament_density_list+=m_config.filament_density.serialize()) +='\n'; + file.writeln(filament_density_list); + + std::string filament_diameter_list = "; filament_diameter: "; + (filament_diameter_list += m_config.filament_diameter.serialize()) += '\n'; + file.writeln(filament_diameter_list); + + coordf_t max_height_z = -1; + for (const auto& object : print.objects()) + max_height_z = std::max(object->layers().back()->print_z, max_height_z); + + std::ostringstream max_height_z_tip; + max_height_z_tip<<"; max_z_height: " << std::fixed << std::setprecision(2) << max_height_z << '\n'; + file.writeln(max_height_z_tip.str()); + } + + { + auto used_filaments = print.get_slice_used_filaments(false); + std::ostringstream out; + out << "; filament: "; + for (size_t idx = 0; idx < used_filaments.size(); ++idx) { + if (idx != 0) + out << ','; + out << used_filaments[idx] + 1; + } + file.writeln(out.str()); + } + + file.write_format("; HEADER_BLOCK_END\n\n"); + } + + // BBS: write global config at the beginning of gcode file because printer + // need these config information + // Append full config, delimited by two 'phony' configuration keys + // CONFIG_BLOCK_START and CONFIG_BLOCK_END. The delimiters are structured + // as configuration key / value pairs to be parsable by older versions of + // PrusaSlicer G-code viewer. + { + if (is_bbl_printers && !skip_config_block) { + file.write("; CONFIG_BLOCK_START\n"); + std::string full_config; + append_full_config(print, full_config); + if (!full_config.empty()) + file.write(full_config); + + // SoftFever: write compatiple image + int first_layer_bed_temperature = get_bed_temperature(0, true, print.config().curr_bed_type); + file.write_format("; first_layer_bed_temperature = %d\n", + first_layer_bed_temperature); + file.write_format( + "; first_layer_temperature = %d\n", + print.config().nozzle_temperature_initial_layer.get_at(0)); + file.write("; CONFIG_BLOCK_END\n\n"); + } else if (thumbnail_cb != nullptr) { + // generate the thumbnails + auto [thumbnails, errors] = GCodeThumbnails::make_and_check_thumbnail_list(print.full_print_config()); + + if (errors != enum_bitmask()) { + std::string error_str = format("Invalid thumbnails value:"); + error_str += GCodeThumbnails::get_error_string(errors); + throw Slic3r::ExportError(error_str); + } + + if (!thumbnails.empty()) + GCodeThumbnails::export_thumbnails_to_file( + thumbnail_cb, print.get_plate_index(), thumbnails, [&file](const char* sz) { file.write(sz); }, [&print]() { print.throw_if_canceled(); }); + } + } + + + // Write some terse information on the slicing parameters. + const PrintObject *first_object = print.objects().front(); + const double layer_height = first_object->config().layer_height.value; + const double initial_layer_print_height = print.config().initial_layer_print_height.value; + for (size_t region_id = 0; region_id < print.num_print_regions(); ++ region_id) { + const PrintRegion ®ion = print.get_print_region(region_id); + file.write_format("; external perimeters extrusion width = %.2fmm\n", region.flow(*first_object, frExternalPerimeter, layer_height).width()); + file.write_format("; perimeters extrusion width = %.2fmm\n", region.flow(*first_object, frPerimeter, layer_height).width()); + file.write_format("; infill extrusion width = %.2fmm\n", region.flow(*first_object, frInfill, layer_height).width()); + file.write_format("; solid infill extrusion width = %.2fmm\n", region.flow(*first_object, frSolidInfill, layer_height).width()); + file.write_format("; top infill extrusion width = %.2fmm\n", region.flow(*first_object, frTopSolidInfill, layer_height).width()); + if (print.has_support_material()) + file.write_format("; support material extrusion width = %.2fmm\n", support_material_flow(first_object).width()); + if (print.config().initial_layer_line_width.value > 0) + file.write_format("; first layer extrusion width = %.2fmm\n", region.flow(*first_object, frPerimeter, initial_layer_print_height, true).width()); + file.write_format("\n"); + } + + file.write_format("; EXECUTABLE_BLOCK_START\n"); + + // SoftFever + if( m_enable_exclude_object) + file.write(set_object_info(&print)); + + // adds tags for time estimators + file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::First_Line_M73_Placeholder).c_str()); + + // Emit machine envelope limits for the Marlin firmware. + this->print_machine_envelope(file, print); + + // Disable fan. + if (m_config.auxiliary_fan.value && print.config().close_fan_the_first_x_layers.get_at(initial_extruder_id)) { + file.write(m_writer.set_fan(0)); + //BBS: disable additional fan + file.write(m_writer.set_additional_fan(0)); + } + std::string machine_start_gcode = this->placeholder_parser_process("machine_start_gcode", print.config().machine_start_gcode.value, initial_extruder_id); if (print.config().gcode_flavor != gcfKlipper) { // Set bed temperature if the start G-code does not contain any bed temp control G-codes. @@ -4137,6 +4198,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato // Const input (tool-change fallback for non-wipe-tower prints) print.tool_ordering())); print.m_print_statistics.initial_tool = initial_extruder_id; + print.m_print_statistics.initial_no_support_tool = initial_non_support_extruder_id; if (!is_bbl_printers) { file.write_format("; total filament used [g] = %.2lf\n", print.m_print_statistics.total_weight); @@ -7908,6 +7970,20 @@ double GCode::calc_max_volumetric_speed(const double layer_height, const double return res; } +// ORCA: Overlap at or below which the overhang fan switches on; negative when it does not depend on overlap +// (Overhang_threshold_none cools every external perimeter). +static float overhang_fan_overlap_threshold(int overhang_fan_threshold) +{ + switch (overhang_fan_threshold) { + case (int) Overhang_threshold_1_4: return 0.9f; + case (int) Overhang_threshold_2_4: return 0.75f; + case (int) Overhang_threshold_3_4: return 0.5f; + case (int) Overhang_threshold_4_4: return 0.25f; + case (int) Overhang_threshold_bridge: return 0.05f; + default: return -1.f; + } +} + std::string GCode::_extrude(const ExtrusionPath &path, std::string description, double speed) { std::string gcode; @@ -8038,7 +8114,7 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description, _mm3_per_mm *= filament_flow_ratio; if (path.role() == erTopSolidInfill) { - _mm3_per_mm *= m_config.top_solid_infill_flow_ratio; + _mm3_per_mm *= NOZZLE_CONFIG(top_solid_infill_flow_ratio); } else if (path.role() == erBottomSurface) { _mm3_per_mm *= m_config.bottom_solid_infill_flow_ratio; } else if (path.role() == erInternalBridgeInfill) { @@ -8250,6 +8326,13 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description, ConfigOptionPercents overhang_overlap_levels({90, 75, 50, 25, 13, 0}); + // ORCA: Lets the path be split where the overhang fan switches, not only where the speed changes. + // Bridges and overhang perimeters are cooled regardless of overlap. + float fan_overlap_threshold = -1.f; + if (FILAMENT_CONFIG(enable_overhang_bridge_fan) && m_enable_cooling_markers && path.role() != erBridgeInfill && + path.role() != erOverhangPerimeter) + fan_overlap_threshold = overhang_fan_overlap_threshold(FILAMENT_CONFIG(overhang_fan_threshold)); + if (NOZZLE_CONFIG(slowdown_for_curled_perimeters)){ ConfigOptionFloatsOrPercents dynamic_overhang_speeds( {FloatOrPercent{100, true}, @@ -8270,7 +8353,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description, FloatOrPercent{NOZZLE_CONFIG(overhang_4_4_speed).get_abs_value(ref_speed) * 100 / ref_speed, true}}); new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds, - ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters)); + ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters), + fan_overlap_threshold); }else{ ConfigOptionFloatsOrPercents dynamic_overhang_speeds( {FloatOrPercent{100, true}, @@ -8289,7 +8373,8 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description, FloatOrPercent{NOZZLE_CONFIG(bridge_speed) * 100 / ref_speed, true}}); new_points = m_extrusion_quality_estimator.estimate_extrusion_quality(path, overhang_overlap_levels, dynamic_overhang_speeds, - ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters)); + ref_speed, speed, NOZZLE_CONFIG(slowdown_for_curled_perimeters), + fan_overlap_threshold); } variable_speed = std::any_of(new_points.begin(), new_points.end(), [speed](const ProcessedPoint &p) { return fabs(double(p.speed) - speed) > 1; }); // Ignore small speed variations (under 1mm/sec) @@ -8441,28 +8526,10 @@ std::string GCode::_extrude(const ExtrusionPath &path, std::string description, if (role == erBridgeInfill || role == erOverhangPerimeter) { // ORCA: Split out bridge infill to internal and external to apply separate fan settings return true; } - switch (overhang_fan_threshold) { - case (int)Overhang_threshold_1_4: - return overlap <= 0.9f; - break; - case (int)Overhang_threshold_2_4: - return overlap <= 0.75f; - break; - case (int)Overhang_threshold_3_4: - return overlap <= 0.5f; - break; - case (int)Overhang_threshold_4_4: - return overlap <= 0.25f; - break; - case (int)Overhang_threshold_bridge: - return overlap <= 0.05f; - break; - case (int)Overhang_threshold_none: + if (overhang_fan_threshold == Overhang_threshold_none) return is_external_perimeter(role); - break; - default: - return false; - } + const float overlap_threshold = overhang_fan_overlap_threshold(overhang_fan_threshold); + return overlap_threshold >= 0.f && overlap <= overlap_threshold; }; std::string comment; diff --git a/src/libslic3r/GCode.hpp b/src/libslic3r/GCode.hpp index 5208c4a5f3..41986cc1d6 100644 --- a/src/libslic3r/GCode.hpp +++ b/src/libslic3r/GCode.hpp @@ -107,7 +107,8 @@ public: m_is_first_print(true), m_print_config(&print_config), m_last_wipe_tower_print_z(print_config.z_offset.value), - m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(print_config)) + m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(print_config)), + m_sparse_layers_combined(wipe_tower_sparse_layers_combined(print_config)) { // Precomputed rather than accumulated while emitting, so that the clearance validator and // the emitter cannot disagree about where the compacted tower sits on any given layer. @@ -138,6 +139,7 @@ public: private: WipeTowerIntegration& operator=(const WipeTowerIntegration&); std::string append_tcr(GCode &gcodegen, const WipeTower::ToolChangeResult &tcr, int new_extruder_id, double z = -1.) const; + std::string tower_height_tag(GCode &gcodegen, const WipeTower::ToolChangeResult &tcr, const std::string &tcr_gcode) const; Polyline generate_path_to_wipe_tower(const Point &start_pos, const Point &end_pos, const BoundingBox &avoid_polygon, const Polygons &bed_polygons) const; std::string append_tcr2(GCode &gcodegen, const WipeTower::ToolChangeResult &tcr, int new_extruder_id, double z = -1.) const; std::string travel_to_tower_gap(GCode &gcodegen, const Point &route_start, const Point &start_wipe_pos) const; @@ -175,6 +177,9 @@ private: // wipe_tower_no_sparse_layers, as answered by the shared compaction rule rather than by the raw // option: smooth timelapse and wrapping detection keep a tower on every layer regardless. const bool m_sparse_layers_skipped; + // Combined tower layers are thicker than the object layer they sit on, the only case where the + // tower's height is not the one process_layer already declared. + const bool m_sparse_layers_combined; // Print z of the compacted tower per planned layer. Empty when the tower is not compacted. std::vector m_compacted_tower_z; }; diff --git a/src/libslic3r/GCode/ExtrusionProcessor.hpp b/src/libslic3r/GCode/ExtrusionProcessor.hpp index 1d65e83f3e..8ed829aa6e 100644 --- a/src/libslic3r/GCode/ExtrusionProcessor.hpp +++ b/src/libslic3r/GCode/ExtrusionProcessor.hpp @@ -41,10 +41,12 @@ std::vector> estimate_points_properties(const POINTS& float flow_width, float max_line_length = -1.0f, float min_distance = -1.0f, - // Maps an overhang distance onto the speed it will be printed at. Interior sampling - // needs it to tell which of the points it could add would change the G-code, and is - // skipped without it. - const std::function& distance_to_speed = {}) + // Speed an overhang distance prints at. Without it, interior sampling + // is skipped and every line over 4mm is split. + const std::function& distance_to_speed = {}, + // Overlap (1 - distance / flow_width) at or below which the overhang + // fan switches on; negative when the fan does not depend on overlap. + float fan_overlap_threshold = -1.0f) { bool looped = input_points.front() == input_points.back(); std::function get_prev_index = [](size_t idx, size_t count) { @@ -125,29 +127,43 @@ std::vector> estimate_points_properties(const POINTS& points.push_back(next_point); } + // ORCA: How an overhang distance prints, which is what the passes below compare. A segment is printed at the lower + // of the speeds at its two ends, and with the overhang fan on if the overlap at either end turns it on. A point + // added to a path can therefore only change the G-code where it prints at a different speed or fan state from the + // points either side of it, and the passes below add points there and nowhere else. + const float width_inv = 1.f / flow_width; + // Whether an overhang distance turns the overhang fan on. The overlap test check_overhang_fan applies in GCode.cpp. + auto fan_on = [fan_overlap_threshold, width_inv](float distance) { + return fan_overlap_threshold >= 0.f && 1.f - distance * width_inv <= fan_overlap_threshold; + }; + // Whether two overhang distances are interchangeable ie have the same speed (beyond a 1mm/sec threshold that gcode.cpp filters out on) + // and the same fan state. + auto same_speed_and_fan = [&distance_to_speed, &fan_on](float a, float b) { + return std::abs(distance_to_speed(a) - distance_to_speed(b)) <= 1.f && fan_on(a) == fan_on(b); + }; + // Whether the first overhang distance prints slower than the second, beyond the 1mm/sec gcode.cpp tolerance, or turns the overhang + // fan on where the second does not. Against a supported point (overhang distance 0) it tells whether an end is + // affected by the overhang. + auto slower_or_cooled = [&distance_to_speed, &fan_on](float a, float b) { + return distance_to_speed(a) < distance_to_speed(b) - 1.f || (fan_on(a) && !fan_on(b)); + }; + // ORCA: Interior sampling - // The passes below infer the support under a span from its endpoints alone, so an interior that is supported - // differently from both ends is invisible to them: the outer perimeter of an overhang whose ends are caged by - // full height walls reads as supported along its whole length. Probe the interior, keep the samples the - // endpoint interpolation fails to predict, and bisect either side of each one, so a span that is only partly - // unsupported gets points where its support actually changes instead of one reading spread across all of it. - if (PREV_LAYER_BOUNDARY_OFFSET && ADD_INTERSECTIONS && min_distance > 0 && distance_to_speed) { + // The passes below infer the support under a span from its endpoints alone, so a part that is supported + // differently from both ends is invisible to them. The outer perimeter of an overhang whose ends are supported by + // reads as supported along its whole length. Probe the interior, keep the samples the endpoint interpolation fails to predict, + // and bisect either side of each one, so a span that is only partly unsupported gets points where its support actually changes + // instead of one reading being spread across all of it. + // Skipped where there is nothing to find: min_distance <= 0 when no overhang can slow this path down, and + // fan_overlap_threshold < 0 when no overhang switches the fan on. It also needs distance_to_speed to tell which of + // the points it could add would change the G-code. + if (PREV_LAYER_BOUNDARY_OFFSET && ADD_INTERSECTIONS && distance_to_speed && (min_distance > 0 || fan_overlap_threshold >= 0.f)) { // Probe at least this densely before treating matching samples as evidence that a span is uniform. The // segmentation pass below only splits lines of 2mm or more, and every pass here drops points closer - // together than min_spacing, so finer discovery would not produce a more precise speed transition. + // together than min_spacing, so finer discovery would not produce a more precise transition. const double max_probe_spacing = std::max(2., 4. * min_spacing); // A backstop for that length test, which on a non-finite length would never be met. constexpr int max_bisection_depth = 10; - // Whether two readings are interchangeable. A segment is printed at the lower of the speeds its ends - // read, so a sample that agrees on speed with what is already known cannot change the G-code, whatever - // its distance says. The distances themselves are far too coarse a stand-in for this: the speed sections - // interpolate, so readings a small fraction of min_distance apart can still be tens of mm/s apart. - // The tolerance matches the one GCode.cpp applies when it decides a path has a variable speed at all. - auto same_speed = [&distance_to_speed](float a, float b) { - return std::abs(distance_to_speed(a) - distance_to_speed(b)) <= 1.f; - }; - // Whether the first reading is printed slower than the second, once they are known to differ. - auto prints_slower = [&distance_to_speed](float a, float b) { return distance_to_speed(a) < distance_to_speed(b); }; // Part of a segment still to bisect: its positions along the segment and bisections left. struct Subspan { double t0, t1; int depth; }; @@ -185,8 +201,8 @@ std::vector> estimate_points_properties(const POINTS& if (!interior.empty()) { std::sort(interior.begin(), interior.end(), [](const std::pair& l, const std::pair& r) { return l.first < r.first; }); - // Coarse probing keeps every sample it took until this pass can see which ones bracket a speed - // transition. Matching samples cannot be discarded during discovery: one may be the last + // Coarse probing keeps every sample it took until this pass can see which ones bracket a speed or + // fan transition. Matching samples cannot be discarded during discovery: one may be the last // supported point before a narrow unsupported pocket found by a later probe. size_t kept = 0; for (size_t i = 0; i < interior.size(); ++i) { @@ -195,15 +211,15 @@ std::vector> estimate_points_properties(const POINTS& const bool at_end = i + 1 == interior.size(); // And nothing follows the last sample but the segment's end const float before = at_start ? curr.distance : interior[kept - 1].second; const float after = at_end ? next.distance : interior[i + 1].second; - // A sample is worth a point in the path only where it prints at a different speed from the - // readings either side of it. Differing from one of the segment's own ends is not enough on - // its own where the sample is the faster of the two: the segmentation pass below already - // ends the slowdown an end reads, at a distance taken from how far out that end is rather - // than from wherever bisection happened to stop, and a point here would leave the span - // beside the end too short for that pass to run at all. Support an end cannot account for, - // where the interior is the slower reading, is exactly what this pass is here to find. - const bool worth_before = !same_speed(sample, before) && (!at_start || prints_slower(sample, before)); - const bool worth_after = !same_speed(sample, after) && (!at_end || prints_slower(sample, after)); + // A sample is worth a point in the path only where it prints differently, in speed or fan state, + // from the points either side of it. Differing from one of the segment's own ends is not enough on + // its own where the sample is not the slower or cooled of the two: the segmentation pass below + // already confines the slowdown and cooling at an end, at a distance taken from how far out that + // end is rather than from wherever bisection happened to stop, and a point here would leave the + // span beside the end too short for that pass to run at all. Support an end cannot account for, + // where the interior is the slower or cooled of the two, is exactly what this pass is here to find. + const bool worth_before = !same_speed_and_fan(sample, before) && (!at_start || slower_or_cooled(sample, before)); + const bool worth_after = !same_speed_and_fan(sample, after) && (!at_end || slower_or_cooled(sample, after)); if (worth_before || worth_after) interior[kept++] = interior[i]; } @@ -238,52 +254,60 @@ std::vector> estimate_points_properties(const POINTS& if ((curr.distance > -boundary_offset && curr.distance < boundary_offset + 2.0f) || (next.distance > -boundary_offset && next.distance < boundary_offset + 2.0f)) { double line_len = (next.position - curr.position).norm(); - - // ORCA: Segment path to smaller lines by adding additional points only if the path has an overhang that - // will trigger a slowdown and the path is also reasonably large, i.e. 2mm in length or more - // If there is no overhang in the start/end point, dont segment it. - // Ignore this check if the control of segmentation for overhangs is disabled (min_distance=-1) - if ((min_distance > 0 && ((std::abs(curr.distance) > min_distance) || (std::abs(next.distance) > min_distance)) && line_len >= 2.f) || - (min_distance <= 0 && line_len > 4.0f)) { + + // ORCA: A line prints as slow as its slower end and is cooled if either end is, so an overhang at one + // end would otherwise slow down or cool the whole line. Split the line so that only the part beside + // that end prints that way, if the line is reasonably long (2mm or more) and at least one end prints + // slower or cooled compared with a supported point (overhang distance 0). Deciding on how the end + // prints, rather than on its overhang distance against min_distance, also catches an end whose overhang + // distance is exactly where the slowdown begins, such as an outline crossing at half a line width. + // Without distance_to_speed, split every line over 4mm. + const bool split_line = distance_to_speed ? + line_len >= 2.f && (slower_or_cooled(curr.distance, 0.f) || slower_or_cooled(next.distance, 0.f)) : + line_len > 4.0f; + if (split_line) { + // Each end's piece is that end's overhang distance plus 1.5 line widths (3 * boundary_offset) long: + // a0 ends the piece beside curr, a1 starts the piece beside next. double a0 = std::clamp((curr.distance + 3 * boundary_offset) / line_len, 0.0, 1.0); double a1 = std::clamp(1.0f - (next.distance + 3 * boundary_offset) / line_len, 0.0, 1.0); double t0 = std::min(a0, a1); double t1 = std::max(a0, a1); - if (t0 < 1.0) { - Vec p0 = curr.position + t0 * (next.position - curr.position); - auto [p0_dist, p0_near_l, p0_x] = unscaled_prev_layer.template distance_from_lines_extra( - p0.template cast()); - ExtendedPoint new_p{}; - new_p.position = p0; - new_p.distance = float(p0_dist + boundary_offset); - // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change - // or if this option is disabled (min_distance<=0) - if( (std::abs(p0_dist) > min_distance) || (min_distance<=0)){ - // ORCA: also filter out points that are introduced to the start of the path when their distance from the start point is - // not meaningful - if ((p0 - curr.position).norm() > min_spacing && (next.position - p0).norm() > min_spacing) { - new_points.push_back(new_p); - } - } + // Up to two cut points, in order along the line. Each takes its own overhang distance, so every + // piece prints by the overhang distances at its own two ends. t0 >= 1 or t1 <= 0 falls on the + // line's own end, so there is no cut. A cut closer than min_spacing to either end of the line is + // not meaningful and is filtered out (#6714). + ExtendedPoint cut[2]{}; + bool keep[2] = {false, false}; + for (int k = 0; k < 2; ++k) { + const double t = k == 0 ? t0 : t1; + if (k == 0 ? t >= 1.0 : t <= 0.0) + continue; + const Vec p = curr.position + t * (next.position - curr.position); + auto [p_dist, p_near_l, p_x] = unscaled_prev_layer.template distance_from_lines_extra( + p.template cast()); + cut[k].position = p; + cut[k].distance = float(p_dist + boundary_offset); + keep[k] = (p - curr.position).norm() > min_spacing && (next.position - p).norm() > min_spacing; } - if (t1 > 0.0) { - Vec p1 = curr.position + t1 * (next.position - curr.position); - auto [p1_dist, p1_near_l, p1_x] = unscaled_prev_layer.template distance_from_lines_extra( - p1.template cast()); - ExtendedPoint new_p{}; - new_p.position = p1; - new_p.distance = float(p1_dist + boundary_offset); - // ORCA: only create a new point in the path if the new point overhang distance will be used to generate a speed change - // or if this option is disabled (min_distance<=0) - if( (std::abs(p1_dist) > min_distance) || (min_distance<=0)){ - // ORCA: filter out points that are introduced to the end of the path when their distance from the end point is - // not meaningful - if ((p1 - curr.position).norm() > min_spacing && (next.position - p1).norm() > min_spacing) { - new_points.push_back(new_p); - } - } + if (distance_to_speed) { + // Only keep a cut that changes the G-code: one that prints differently from at least one of the + // points either side of it, which are the line's ends or the other cut where that is kept. A cut + // that prints like both would only split a move into two identical ones. + if (keep[0]) + keep[0] = !same_speed_and_fan(cut[0].distance, curr.distance) || + !same_speed_and_fan(cut[0].distance, keep[1] ? cut[1].distance : next.distance); + if (keep[1]) + keep[1] = !same_speed_and_fan(cut[1].distance, keep[0] ? cut[0].distance : curr.distance) || + !same_speed_and_fan(cut[1].distance, next.distance); + // Two cuts closer together than min_spacing would leave a micro segment between them, so only the + // first is kept. + if (keep[0] && keep[1] && (cut[1].position - cut[0].position).norm() <= min_spacing) + keep[1] = false; } + for (int k = 0; k < 2; ++k) + if (keep[k]) + new_points.push_back(cut[k]); } } new_points.push_back(next); @@ -423,7 +447,10 @@ public: const ConfigOptionFloatsOrPercents &speeds, float ext_perimeter_speed, float original_speed, - bool slowdown_for_curled_edges) + bool slowdown_for_curled_edges, + // Overlap at or below which the overhang fan switches on; negative when the fan + // does not depend on overlap. + float fan_overlap_threshold = -1.0f) { size_t speed_sections_count = std::min(overlaps.values.size(), speeds.values.size()); std::vector> speed_sections; @@ -463,7 +490,8 @@ public: } } - // If a meaningful (i.e. needing slowdown) overhang distance was not found, then we shouldn't split the lines + // If no overhang distance slows this path down, -1 turns interior sampling off unless the overhang fan can switch. + // Lines are only split where an end prints slower or cooled, so here only a fan switch splits them. if (!found) smallest_distance_with_lower_speed=-1.f; @@ -487,9 +515,17 @@ public: return round(final_speed); }; + // ORCA: The speed sections are built from ext_perimeter_speed, which can be above the speed this path prints at + // (original_speed, e.g. held down by resonance avoidance). Every segment is capped at original_speed below, so + // overhang distances whose speeds differ only above it print the same and must not count as a speed change when + // the path is split. + auto effective_speed = [&calculate_speed, original_speed](float distance) { + return std::min(calculate_speed(distance), original_speed); + }; + std::vector> extended_points = estimate_points_properties(path.polyline.points, prev_layer_boundaries[current_object], path.width, -1, - smallest_distance_with_lower_speed, calculate_speed); + smallest_distance_with_lower_speed, effective_speed, fan_overlap_threshold); const auto width_inv = 1.0f / path.width; std::vector processed_points; processed_points.reserve(extended_points.size()); diff --git a/src/libslic3r/GCode/PreciseSeam.cpp b/src/libslic3r/GCode/PreciseSeam.cpp new file mode 100644 index 0000000000..378ab2d2d3 --- /dev/null +++ b/src/libslic3r/GCode/PreciseSeam.cpp @@ -0,0 +1,1353 @@ +#include "PreciseSeam.hpp" +#include "SeamPlacer.hpp" +#include "libslic3r/BoundingBox.hpp" +#include +#include +#include + +namespace Slic3r { +namespace PreciseSeam { + +// Import EnforcedBlockedSeamPoint from SeamPlacerImpl namespace for convenience +using SeamPlacerImpl::EnforcedBlockedSeamPoint; + +// Machine precision for checking exact coordinate matching (squared distance) +// Ideally, intersection points should match perimeter vertices bitwise, +// but we account for possible machine rounding errors in Clipper calculations +// Actual deviations: maximum ~0.27, using 2.5 with margin (nanometers) +static constexpr double MACHINE_PRECISION_SQUARED = 2.5; + +// Tolerance for checking proximity when inserting seam points into perimeter +static const coord_t TOLERANCE_LINEAR = scale_(0.001); // 1.0 micrometers +static const coord_t TOLERANCE_SQUARED = TOLERANCE_LINEAR * TOLERANCE_LINEAR; + +// Find common segment between intersection polygon and object perimeter +// +// REQUIREMENTS: +// - intersection_polygon must be converted to CCW (counter-clockwise) beforehand +// - perimeter_polygon must be converted to CCW (counter-clockwise) beforehand +// +// Parameters: +// intersection_polygon - intersection area polygon (result of intersection()), CCW orientation +// perimeter_polygon - object outline (outer perimeter), CCW orientation +// modifier_polygon - modifier that formed the intersection +// +// Returns: +// SegmentData - longest continuous segment with point correspondence +// std::nullopt - if segment not found (< 2 points) or error +// +static std::optional common_segment_in_intersection( + const Polygon &intersection_polygon, + const Polygon &perimeter_polygon, + PreciseSeamWarnings* warnings = nullptr) +{ + const size_t isect_n = intersection_polygon.points.size(); + const size_t perim_n = perimeter_polygon.points.size(); + + // Check for empty polygons + if (isect_n == 0 || perim_n == 0) { + return std::nullopt; + } + + // Minimum 2 points required to form segment + if (isect_n < 2) { + return std::nullopt; + } + + // ============================================================ + // STEP 1: Project all intersection points onto perimeter + // ============================================================ + + struct PointProjection { + double dist_squared; // Squared distance to perimeter + size_t edge_index; // Edge/vertex index of perimeter + bool on_perimeter; // Whether point lies on perimeter (within machine precision) + }; + + std::vector projections; + projections.reserve(isect_n); + + // Project each intersection point onto perimeter + for (size_t i = 0; i < isect_n; ++i) { + size_t edge_idx; + const Point proj_point = perimeter_polygon.point_projection(intersection_polygon.points[i], &edge_idx); + const double dist_sq = (intersection_polygon.points[i] - proj_point).cast().squaredNorm(); + + const auto invalid = std::numeric_limits::max(); + if (edge_idx == invalid) { + // Projection error - point does not belong to perimeter + projections.push_back({dist_sq, edge_idx, false}); + } else { + // Check whether point lies on perimeter (within machine precision) + bool on_perim = (dist_sq <= MACHINE_PRECISION_SQUARED); + projections.push_back({dist_sq, edge_idx, on_perim}); + } + } + + // ============================================================ + // STEP 2: Find all continuous segments of points on perimeter + // ============================================================ + + std::vector processed(isect_n, false); // Processed point flags + std::vector> segments; // Found segments (point indices) + + for (size_t start_idx = 0; start_idx < isect_n; ++start_idx) { + // Skip processed or non-perimeter points + if (processed[start_idx] || !projections[start_idx].on_perimeter) { + continue; + } + + // Found point on perimeter - search for continuous segment + std::vector backward_indices; // Point indices backward from start_idx + std::vector forward_indices; // Point indices forward from start_idx (including start_idx) + + // Add start point to forward + forward_indices.push_back(start_idx); + processed[start_idx] = true; + + // Backward traversal (only if start_idx == 0, for wrap-around handling) + if (start_idx == 0) { + for (size_t offset = 1; offset < isect_n; ++offset) { + size_t curr_idx = (start_idx + isect_n - offset) % isect_n; + + // Stop if point already processed or not on perimeter + if (processed[curr_idx] || !projections[curr_idx].on_perimeter) { + break; + } + + backward_indices.push_back(curr_idx); + processed[curr_idx] = true; + } + } + + // Forward traversal from start_idx + for (size_t offset = 1; offset < isect_n; ++offset) { + size_t curr_idx = (start_idx + offset) % isect_n; + + // Stop if point already processed or not on perimeter + if (processed[curr_idx] || !projections[curr_idx].on_perimeter) { + break; + } + + forward_indices.push_back(curr_idx); + processed[curr_idx] = true; + } + + // Merge backward (in reverse order) + forward into one segment + std::vector segment_indices; + segment_indices.reserve(backward_indices.size() + forward_indices.size()); + + // Add backward in reverse order + segment_indices.insert( + segment_indices.end(), + backward_indices.rbegin(), + backward_indices.rend() + ); + + // Add forward + segment_indices.insert( + segment_indices.end(), + forward_indices.begin(), + forward_indices.end() + ); + + // Save found segment + segments.push_back(std::move(segment_indices)); + } + + // ============================================================ + // STEP 3: Select longest segment + // ============================================================ + + // If no segments found + if (segments.empty()) { + return std::nullopt; + } + + // Search for segment with maximum point count + auto it_longest = std::max_element( + segments.begin(), + segments.end(), + [](const auto &a, const auto &b) { return a.size() < b.size(); } + ); + + const std::vector &longest_segment = *it_longest; + + // Check minimum requirement: >= 2 points + if (longest_segment.size() < 2) { + return std::nullopt; + } + + // Special case: all intersection vertices lie on perimeter + if (longest_segment.size() == isect_n) { + // Threshold for edge midpoint check: increased by 0.5 due to rounding error in integer coordinate division + constexpr double EDGE_CENTER_THRESHOLD = MACHINE_PRECISION_SQUARED + 0.5; + + // Check each intersection edge - does its midpoint lie on perimeter + std::vector edges_not_on_perim_indices; + + for (size_t i = 0; i < isect_n; ++i) { + size_t next_i = (i + 1) % isect_n; + + // Calculate edge midpoint i→next_i + const Point &pt1 = intersection_polygon.points[i]; + const Point &pt2 = intersection_polygon.points[next_i]; + Point edge_center( + (pt1.x() + pt2.x()) / 2, + (pt1.y() + pt2.y()) / 2 + ); + + // Project midpoint onto perimeter + const Point proj = perimeter_polygon.point_projection(edge_center); + const double dist_sq = (edge_center - proj).cast().squaredNorm(); + + // Check if midpoint lies on perimeter (accounting for rounding error) + if (dist_sq > EDGE_CENTER_THRESHOLD) { + edges_not_on_perim_indices.push_back(i); + } + } + + // Analyze results + if (edges_not_on_perim_indices.empty()) { + // All edges on perimeter → modifier fully contains perimeter → not suitable for seam placement + if (warnings) + warnings->full_containment.store(true, std::memory_order_relaxed); + return std::nullopt; + } + + // Edges not on perimeter act as "cuts" that split the circular ring of vertices + // into separate on-perimeter segments. For k cuts there are k segments. + // We iterate over consecutive pairs of cuts and pick the longest segment. + const size_t k = edges_not_on_perim_indices.size(); + size_t best_start = 0; + size_t best_length = 0; + + for (size_t i = 0; i < k; ++i) { + size_t gap_cur = edges_not_on_perim_indices[i]; + size_t gap_next = edges_not_on_perim_indices[(i + 1) % k]; + + // Segment starts at the vertex right after the current cut + size_t start = (gap_cur + 1) % isect_n; + // Number of vertices from start up to and including the vertex before the next cut + size_t length = (gap_next - gap_cur - 1 + isect_n) % isect_n + 1; + + if (length > best_length) { + best_length = length; + best_start = start; + } + } + + if (best_length < 2) { + return std::nullopt; + } + + // Form SegmentData from the longest on-perimeter segment + SegmentData result; + result.segment.points.reserve(best_length); + result.perimeter_edge_indices.reserve(best_length); + + for (size_t i = 0; i < best_length; ++i) { + size_t idx = (best_start + i) % isect_n; + result.segment.points.push_back(intersection_polygon.points[idx]); + result.perimeter_edge_indices.push_back(projections[idx].edge_index); + } + + return result; + } + + // ============================================================ + // STEP 4: Form SegmentData result + // ============================================================ + + SegmentData result; + result.segment.points.reserve(longest_segment.size()); + result.perimeter_edge_indices.reserve(longest_segment.size()); + + // Fill points and edge_index for each segment point + for (size_t idx : longest_segment) { + result.segment.points.push_back(intersection_polygon.points[idx]); + result.perimeter_edge_indices.push_back(projections[idx].edge_index); + } + + return result; +} + +// Fast search for common segment between intersection polygon and object perimeter +// Hybrid algorithm: first exact coordinate matching, then geometric check +// +// REQUIREMENTS: +// - intersection_polygon must be converted to CCW (counter-clockwise) beforehand +// - perimeter_polygon must be converted to CCW (counter-clockwise) beforehand +// +// Parameters: +// intersection_polygon - intersection area polygon (result of intersection()), CCW orientation +// perimeter_polygon - object outline (outer perimeter), CCW orientation +// +// Returns: +// SegmentData - continuous segment with point correspondence +// std::nullopt - if segment not found (< 2 points) or error +// +static std::optional common_segment_in_intersection_fast( + const Polygon &intersection_polygon, + const Polygon &perimeter_polygon, + PreciseSeamWarnings* warnings = nullptr) +{ + const size_t isect_n = intersection_polygon.points.size(); + const size_t perim_n = perimeter_polygon.points.size(); + + // ============================================================ + // STEP 1: Input data validation + // ============================================================ + + if (isect_n == 0 || perim_n == 0) { + return std::nullopt; + } + + if (isect_n < 2) { + return std::nullopt; + } + + // ============================================================ + // STEP 2: Find first point (exact coordinate match) + // ============================================================ + + // Vectors for forward direction + std::vector forward_intersection_indices; + std::vector forward_edge_indices; + forward_intersection_indices.reserve(isect_n); + forward_edge_indices.reserve(isect_n); + + // Vectors for backward direction + std::vector backward_intersection_indices; + std::vector backward_edge_indices; + backward_intersection_indices.reserve(isect_n); + backward_edge_indices.reserve(isect_n); + + size_t first_isect_idx = 0; // index of first matching point in intersection_polygon + size_t first_perim_idx = 0; // index of first matching point in perimeter_polygon (also edge_index) + bool found_first = false; + + // Search for first exact match (not optimized — expected gain is negligible) + for (size_t i = 0; i < isect_n; ++i) { + const Point &isect_pt = intersection_polygon.points[i]; + + auto it = std::find(perimeter_polygon.points.begin(), + perimeter_polygon.points.end(), + isect_pt); + + if (it != perimeter_polygon.points.end()) { + first_isect_idx = i; + first_perim_idx = std::distance(perimeter_polygon.points.begin(), it); + found_first = true; + + // Add first point to forward vectors + forward_intersection_indices.push_back(i); + forward_edge_indices.push_back(first_perim_idx); + break; + } + } + + // If no matching point found - use full geometric algorithm + if (!found_first) { + return common_segment_in_intersection(intersection_polygon, perimeter_polygon, warnings); + } + + // Sentinel value for an invalid edge_index returned by Polygon::point_projection. + const auto invalid = std::numeric_limits::max(); + + // ============================================================ + // STEP 3: Forward pass (from first point forward) + // ============================================================ + + // Adaptive tracking of position in perimeter (instead of fixed prediction) + size_t next_expected_perim_idx = (first_perim_idx + 1) % perim_n; + + for (size_t offset = 1; offset < isect_n; ++offset) { + size_t curr_isect_idx = (first_isect_idx + offset) % isect_n; + const Point &curr_isect_pt = intersection_polygon.points[curr_isect_idx]; + const Point &expected_pt = perimeter_polygon.points[next_expected_perim_idx]; + + // First check exact match with expected position + if (curr_isect_pt == expected_pt) { + forward_intersection_indices.push_back(curr_isect_idx); + forward_edge_indices.push_back(next_expected_perim_idx); + next_expected_perim_idx = (next_expected_perim_idx + 1) % perim_n; + continue; + } + + // Exact match not found - check geometrically + size_t edge_idx; + const Point proj_point = perimeter_polygon.point_projection(curr_isect_pt, &edge_idx); + const double dist_sq = (curr_isect_pt - proj_point).cast().squaredNorm(); + + if (edge_idx == invalid || dist_sq > MACHINE_PRECISION_SQUARED) { + // Point not on perimeter - break forward pass + break; + } + + // Point on perimeter - add and adjust expected position + forward_intersection_indices.push_back(curr_isect_idx); + forward_edge_indices.push_back(edge_idx); + next_expected_perim_idx = (edge_idx + 1) % perim_n; + } + + // ============================================================ + // STEP 4: Backward pass + // ============================================================ + + // Optimization: backward can find maximum (isect_n - forward_count) points + size_t forward_count = forward_intersection_indices.size(); + size_t max_backward_iterations = isect_n - forward_count; + + // Adaptive tracking of position in perimeter for backward direction + next_expected_perim_idx = (first_perim_idx + perim_n - 1) % perim_n; + + for (size_t offset = 1; offset <= max_backward_iterations; ++offset) { + size_t curr_isect_idx = (first_isect_idx + isect_n - offset) % isect_n; + const Point &curr_isect_pt = intersection_polygon.points[curr_isect_idx]; + const Point &expected_pt = perimeter_polygon.points[next_expected_perim_idx]; + + // First check exact match with expected position + if (curr_isect_pt == expected_pt) { + backward_intersection_indices.push_back(curr_isect_idx); + backward_edge_indices.push_back(next_expected_perim_idx); + next_expected_perim_idx = (next_expected_perim_idx + perim_n - 1) % perim_n; + continue; + } + + // Exact match not found - check geometrically + size_t edge_idx; + const Point proj_point = perimeter_polygon.point_projection(curr_isect_pt, &edge_idx); + const double dist_sq = (curr_isect_pt - proj_point).cast().squaredNorm(); + + if (edge_idx == invalid || dist_sq > MACHINE_PRECISION_SQUARED) { + // Point not on perimeter - break backward pass + break; + } + + // Point on perimeter - add and adjust expected position + backward_intersection_indices.push_back(curr_isect_idx); + backward_edge_indices.push_back(edge_idx); + next_expected_perim_idx = (edge_idx + perim_n - 1) % perim_n; + } + + // Check special case: all intersection vertices lie on perimeter + // Use full geometric algorithm (rare case but requires special handling) + size_t total_points = forward_intersection_indices.size() + backward_intersection_indices.size(); + if (total_points == isect_n) { + return common_segment_in_intersection(intersection_polygon, perimeter_polygon, warnings); + } + + // ============================================================ + // STEP 5: Merge backward (reversed) + forward + // ============================================================ + + std::vector continuous_intersection_indices; + std::vector continuous_edge_indices; + + if (backward_intersection_indices.empty()) { + // No backward - just move forward + continuous_intersection_indices = std::move(forward_intersection_indices); + continuous_edge_indices = std::move(forward_edge_indices); + } else { + // Merge: backward (reversed) + forward + size_t total_size = backward_intersection_indices.size() + forward_intersection_indices.size(); + continuous_intersection_indices.reserve(total_size); + continuous_edge_indices.reserve(total_size); + + // Add backward in reverse order + continuous_intersection_indices.insert( + continuous_intersection_indices.end(), + backward_intersection_indices.rbegin(), + backward_intersection_indices.rend() + ); + continuous_edge_indices.insert( + continuous_edge_indices.end(), + backward_edge_indices.rbegin(), + backward_edge_indices.rend() + ); + + // Add forward + continuous_intersection_indices.insert( + continuous_intersection_indices.end(), + forward_intersection_indices.begin(), + forward_intersection_indices.end() + ); + continuous_edge_indices.insert( + continuous_edge_indices.end(), + forward_edge_indices.begin(), + forward_edge_indices.end() + ); + } + + // ============================================================ + // STEP 6: Check minimum size and special cases + // ============================================================ + + if (continuous_intersection_indices.size() < 2) { + return std::nullopt; + } + + // ============================================================ + // STEP 7: Form SegmentData result + // ============================================================ + + SegmentData result; + result.segment.points.reserve(continuous_intersection_indices.size()); + result.perimeter_edge_indices.reserve(continuous_intersection_indices.size()); + + // Fill with original coordinates from intersection_polygon + edge_index + for (size_t i = 0; i < continuous_intersection_indices.size(); ++i) { + size_t idx = continuous_intersection_indices[i]; + result.segment.points.push_back(intersection_polygon.points[idx]); + result.perimeter_edge_indices.push_back(continuous_edge_indices[i]); + } + + return result; +} + +void init_precise_seam_data( + std::vector& strong_volumes_out, + std::vector& weak_volumes_out, + bool& has_strong_out, + const ModelObject* model_object) +{ + // Clear output vectors + strong_volumes_out.clear(); + weak_volumes_out.clear(); + + if (model_object == nullptr) { + has_strong_out = false; + return; + } + + // Collect and categorize precise seam modifiers + for (const ModelVolume* volume : model_object->volumes) { + if (volume->is_precise_seam()) { + ModelVolumeType type = volume->type(); + // Categorization: strong modifiers have priority + if (type == ModelVolumeType::PRECISE_SEAM_CENTER || + type == ModelVolumeType::PRECISE_SEAM_LEFT || + type == ModelVolumeType::PRECISE_SEAM_RIGHT) { + strong_volumes_out.push_back(volume); + } else { + // ENFORCED, BLOCKED, NEUTRAL - weak modifiers (processed later) + weak_volumes_out.push_back(volume); + } + } + } + + has_strong_out = !strong_volumes_out.empty(); + + // Collection already preserves model order, with higher-priority strong modifiers first. + // Weak modifiers use last-write-wins, so apply the higher-priority ones last. + std::reverse(weak_volumes_out.begin(), weak_volumes_out.end()); +} + +// Calculate cumulative lengths for each Polyline point +// Analog of Polygon::parameter_by_length(), adapted for open line +static std::vector polyline_parameter_by_length(const Polyline &polyline) +{ + // Keep scaled-coordinate lengths in double precision for midpoint interpolation. + std::vector lengths(polyline.points.size(), 0.); + for (size_t i = 1; i < polyline.points.size(); ++i) { + lengths[i] = lengths[i-1] + (polyline.points[i] - polyline.points[i-1]).cast().norm(); + } + return lengths; +} + +// Find geometric center coordinates of segment +// Returns: {center coordinates, perimeter vertex index} +// Index is start vertex of edge containing center +static std::optional> segment_center(const SegmentData &data, const Polygon &perimeter_polygon) +{ + const Polyline &segment = data.segment; + + if (segment.points.size() < 2) { + return std::nullopt; // Need at least a line to find middle + } + + std::vector lengths = polyline_parameter_by_length(segment); + if (lengths.empty()) { + return std::nullopt; // Polyline contains no points + } + + double half_length = lengths.back() * 0.5; // Take half of total length + size_t mid_idx = segment.points.size() / 2; + double mid_length = lengths[mid_idx]; + + bool found = false; + size_t start_idx = 0; + size_t end_idx = 0; + + if (mid_length < half_length) { + // Go right (to end) + for (size_t i = mid_idx; i < segment.points.size() - 1; ++i) { + if (lengths[i] <= half_length && half_length < lengths[i+1]) { + start_idx = i; // Fix left point of segment + end_idx = i + 1; // Fix right point of segment + found = true; + break; + } + } + } else if (mid_length > half_length) { + // Go left (to start) + for (size_t i = mid_idx; i > 0; --i) { + if (lengths[i-1] <= half_length && half_length < lengths[i]) { + start_idx = i - 1; // Take neighboring point on left + end_idx = i; // And nearest on right + found = true; + break; + } + } + } else { + // Middle sits exactly at vertex + start_idx = mid_idx; + end_idx = (mid_idx + 1) % segment.points.size(); // use next point (wrap-around) + found = true; + } + + if (!found) { + return std::nullopt; // Didn't find suitable segment + } + + const Point &p1 = segment.points[start_idx]; + const Point &p2 = segment.points[end_idx]; + + double local_mid_length = half_length - lengths[start_idx]; + double edge_length = lengths[end_idx] - lengths[start_idx]; + + Point mid_point; + if (edge_length <= 0.0) { + mid_point = p1; // Degenerate case, take start point + } else { + double k = local_mid_length / edge_length; + mid_point = p1 + (k * (p2 - p1).cast()).cast(); // Linear interpolation + } + + // Clipper may merge several collinear perimeter edges into one segment edge. + // Locate the midpoint on the original perimeter instead of reusing the start's edge. + size_t edge_idx; + const Point projected_midpoint = perimeter_polygon.point_projection(mid_point, &edge_idx); + if (edge_idx == std::numeric_limits::max()) + return std::nullopt; + + return std::make_pair(projected_midpoint, edge_idx); +} + +// Find coordinates of left (first) point of segment +// Returns: {first point coordinates, perimeter vertex index} +// Index is start vertex of edge containing first point +static std::optional> segment_left(const SegmentData &data) +{ + if (data.segment.points.empty()) { + return std::nullopt; + } + + return std::make_pair(data.segment.points[0], data.perimeter_edge_indices[0]); +} + +// Find coordinates of right (last) point of segment +// Returns: {last point coordinates, perimeter vertex index} +// Index is start vertex of edge containing last point +static std::optional> segment_right(const SegmentData &data) +{ + if (data.segment.points.empty()) { + return std::nullopt; + } + + size_t last_idx = data.segment.points.size() - 1; + return std::make_pair(data.segment.points[last_idx], data.perimeter_edge_indices[last_idx]); +} + +// Insert point into perimeter with proximity check to existing vertices +// If point is close to vertex (< TOLERANCE_SQUARED) - use existing vertex +// Returns pair: {final coordinates, point index in polygon} +// edge_start_idx is start vertex of edge containing point +static std::optional> insert_point_into_perimeter( + const Point &point, + size_t edge_start_idx, + Polygon &perimeter_polygon +) +{ + // Check input data + if (perimeter_polygon.points.size() < 3) { + return std::nullopt; // Polygon must be at least a triangle + } + + size_t perim_max = perimeter_polygon.points.size(); + + // Determine edge start and end + size_t vtx_start = edge_start_idx; + size_t vtx_end = (edge_start_idx + 1) % perim_max; + + const Point &perim_p_start = perimeter_polygon.points[vtx_start]; + const Point &perim_p_end = perimeter_polygon.points[vtx_end]; + + // Check proximity to edge vertices + coord_t dist_sq_start = (point - perim_p_start).squaredNorm(); + if (dist_sq_start < TOLERANCE_SQUARED) { + return std::make_pair(perim_p_start, vtx_start); + } + + coord_t dist_sq_end = (point - perim_p_end).squaredNorm(); + if (dist_sq_end < TOLERANCE_SQUARED) { + return std::make_pair(perim_p_end, vtx_end); + } + + // Insert point into perimeter + // IMPORTANT: Special handling for the last edge to preserve indexing for subsequent insertions. + // If this is the last edge (edge_start_idx == perim_max - 1), we append to the end instead of + // inserting at position 0 (which would shift all indices). This allows sorting points by + // descending arc length and inserting them without invalidating previously computed indices. + size_t insert_pos; + if (edge_start_idx == perim_max - 1) { + // Last edge: add to end of vector + perimeter_polygon.points.push_back(point); + insert_pos = perimeter_polygon.points.size() - 1; + } else { + // Regular edge: insert before end vertex + insert_pos = vtx_end; + perimeter_polygon.points.insert( + perimeter_polygon.points.begin() + insert_pos, + point + ); + } + + return std::make_pair(perimeter_polygon.points[insert_pos], insert_pos); +} + +// Insert new point at distance TOLERANCE_LINEAR from specified perimeter vertex +// Insertion direction specified by direction parameter: +1 = after vertex, -1 = before vertex +// If target edge length < 2*TOLERANCE_LINEAR, insertion not performed (new point would be too close to edge end) +// Returns true if point was inserted, false otherwise +// point_idx is index of perimeter vertex from which insertion is performed +static bool refine_at_vertex( + size_t point_idx, + int direction, + Polygon &perimeter_polygon +) +{ + // Check input data + if (perimeter_polygon.points.size() < 3) { + return false; // Polygon must be at least a triangle + } + + if (direction != 1 && direction != -1) { + return false; // Direction must be +1 or -1 + } + + size_t perim_max = perimeter_polygon.points.size(); + + // Determine target edge based on direction + size_t edge_start_idx, edge_end_idx; + + if (direction == 1) { + // Direction +1: insertion AFTER point_idx (edge point_idx → point_idx+1) + edge_start_idx = point_idx; + edge_end_idx = (point_idx + 1) % perim_max; + } else { + // Direction -1: insertion BEFORE point_idx (edge point_idx-1 → point_idx) + edge_start_idx = (point_idx + perim_max - 1) % perim_max; + edge_end_idx = point_idx; + } + + const Point &edge_start = perimeter_polygon.points[edge_start_idx]; + const Point &edge_end = perimeter_polygon.points[edge_end_idx]; + + // Calculate edge length + Vec2d edge_vector = (edge_end - edge_start).cast(); + double edge_length = edge_vector.norm(); + + // Check if edge is long enough for insertion + // New point must be at distance TOLERANCE_LINEAR from start + // and at distance >= TOLERANCE_LINEAR from end + if (edge_length < 2.0 * TOLERANCE_LINEAR) { + return false; // Edge too short - new point would be too close to end + } + + // Calculate new point coordinates: edge_start + TOLERANCE_LINEAR * direction_normalized + Vec2d direction_normalized = edge_vector / edge_length; + // Place helper point near point_idx: after it for +1, before it for -1 + auto offset = (TOLERANCE_LINEAR * direction_normalized).cast(); + Point new_point = (direction == 1) + ? Point(edge_start + offset) + : Point(edge_end - offset); + + // Insert point into perimeter + // IMPORTANT: Special handling of last edge to preserve indexing for subsequent insertions. + // If this is last edge (edge_start_idx == perim_max - 1), add point to end of vector + // instead of inserting at position 0 (which would shift all indices). This allows sorting points + // by descending arc length and inserting them without invalidating previously computed indices. + if (edge_start_idx == perim_max - 1) { + // Last edge: add to end of vector + perimeter_polygon.points.push_back(new_point); + } else { + // Regular edge: insert before end vertex + perimeter_polygon.points.insert( + perimeter_polygon.points.begin() + edge_end_idx, + new_point + ); + } + + return true; +} + +// Insert strong seam point into perimeter polygon +std::optional insert_strong_seam_point( + const std::vector &strong_volumes, + Polygon &polygon, + const Layer *layer, + const ModifierSlicesCache &slices_cache, + PreciseSeamWarnings* warnings) +{ + if (strong_volumes.empty() || layer == nullptr) { + return std::nullopt; + } + + // layer->id() is offset by raft layer count, but modifier_slices is 0-based + // (built from PrintObject::layers() via slice_single_volume). Subtract raft + // offset to get the correct index into the cache. + const size_t raft_layers = layer->object()->slicing_parameters().raft_layers(); + size_t layer_id = layer->id() - raft_layers; + + // Reject disjoint bounds before running polygon clipping; touching bounds still overlap. + const BoundingBox perimeter_bbox(polygon.points); + + // Iterate through strong modifiers in hierarchy order + for (const ModelVolume* modifier_volume : strong_volumes) { + // Look up pre-sliced polygons from cache (sliced once in SeamPlacer::init). + // TODO: slice_single_volume() converts ExPolygons to flat Polygons, losing + // the association between outer contours and their holes. This makes correct + // handling of multiply-connected modifier regions (e.g. a torus cross-section) + // impossible. Consider a variant returning std::vector and adapting + // the algorithm to work with multiply-connected domains. + auto it = slices_cache.find(modifier_volume); + if (it == slices_cache.end()) + continue; // modifier not in cache (should not happen) + const std::vector &modifier_slices = it->second; + + // Check if this layer has slices for this modifier + if (layer_id >= modifier_slices.size()) { + continue; // No slices for this layer + } + + const Polygons &modifier_polygons = modifier_slices[layer_id]; + + // Check for multiply-connected regions (holes = CW polygons). + // slice_single_volume() flattens ExPolygons into Polygons, but preserves + // orientation: CCW = outer contour, CW = hole. If any CW polygon is present, + // the modifier is multiply-connected and cannot be processed correctly. + bool has_holes = std::any_of(modifier_polygons.begin(), modifier_polygons.end(), + [](const Polygon &p) { return p.is_clockwise(); }); + if (has_holes) { + if (warnings) + warnings->multiply_connected.store(true, std::memory_order_relaxed); + continue; + } + + // Iterate through all polygons of the modifier on this layer + // After finding a match, check if remaining modifier polygons also intersect the perimeter. + // Strong modifiers process only one intersection (one seam per perimeter), so any additional + // intersections from unprocessed polygons indicate a multiple-intersection situation. + auto check_remaining_polygons = [&](size_t current_idx) { + if (warnings && !warnings->multiple_intersections.load(std::memory_order_relaxed)) { + // Refinement may have rounded newly inserted points, so use the current bounds. + const BoundingBox refined_bbox(polygon.points); + for (size_t j = current_idx + 1; j < modifier_polygons.size(); ++j) { + if (!refined_bbox.overlap(BoundingBox(modifier_polygons[j].points))) + continue; + if (!intersection(Polygons{polygon}, Polygons{modifier_polygons[j]}).empty()) { + warnings->multiple_intersections.store(true, std::memory_order_relaxed); + break; // one extra intersection is enough to trigger the warning + } + } + } + }; + for (size_t modifier_polygon_idx = 0; modifier_polygon_idx < modifier_polygons.size(); ++modifier_polygon_idx) { + const Polygon &modifier_polygon = modifier_polygons[modifier_polygon_idx]; + if (!perimeter_bbox.overlap(BoundingBox(modifier_polygon.points))) + continue; + // Find intersection with perimeter + Polygons intersection_polygons = intersection(Polygons{polygon}, Polygons{modifier_polygon}); + + // Multiple intersection polygons = modifier crosses perimeter in several places + if (warnings && intersection_polygons.size() > 1) + warnings->multiple_intersections.store(true, std::memory_order_relaxed); + // Diff check: modifier minus perimeter yields >1 polygon = through-body intersection. + // However, if any diff polygon is CW, it is a hole left by full containment + // (modifier fully covers perimeter), not a real through-body case. + // Full containment is detected separately in common_segment_in_intersection(). + if (warnings && !warnings->through_body.load(std::memory_order_relaxed)) { + Polygons diff_polygons = diff(Polygons{modifier_polygon}, Polygons{polygon}); + if (diff_polygons.size() > 1) { + bool has_cw = std::any_of(diff_polygons.begin(), diff_polygons.end(), + [](const Polygon &p) { return p.is_clockwise(); }); + if (!has_cw) + warnings->through_body.store(true, std::memory_order_relaxed); + } + } + + // Process each intersection polygon + for (Polygon &intersection_polygon : intersection_polygons) { + // Convert intersection_polygon to CCW to guarantee same traversal direction as perimeter + intersection_polygon.make_counter_clockwise(); + + // Try to find perimeter segment in this intersection + std::optional segment = common_segment_in_intersection_fast( + intersection_polygon, + polygon, + warnings + ); + + if (!segment.has_value()) { + continue; + } + + // Select target point finder based on modifier type + std::optional> target; + switch (modifier_volume->type()) { + case ModelVolumeType::PRECISE_SEAM_CENTER: target = segment_center(segment.value(), polygon); break; + case ModelVolumeType::PRECISE_SEAM_LEFT: target = segment_left(segment.value()); break; + case ModelVolumeType::PRECISE_SEAM_RIGHT: target = segment_right(segment.value()); break; + default: continue; + } + + if (!target.has_value()) + continue; + + // Insert target point into perimeter with tolerance check + std::optional> result = insert_point_into_perimeter( + target->first, // target_point + target->second, // insert_idx + polygon + ); + + if (!result.has_value()) + continue; + + // Add additional points on both sides to create transition zone. + // +1 must be called before -1: reverse order shifts result->second and breaks insertion. + refine_at_vertex(result->second, +1, polygon); + refine_at_vertex(result->second, -1, polygon); + + check_remaining_polygons(modifier_polygon_idx); + return result->first; + } + } + } + + // No matching segment found or insertion failed + return std::nullopt; +} + +// Convert ModelVolumeType of weak modifier to EnforcedBlockedSeamPoint. +// Precondition: called only with weak precise-seam types (filtered via is_precise_seam_weak()). +// Exhaustive switch (no default) so -Wswitch flags any future PRECISE_SEAM_* additions. +static EnforcedBlockedSeamPoint convert_weak_modifier_type(ModelVolumeType type) { + switch (type) { + case ModelVolumeType::PRECISE_SEAM_ENFORCED: + return EnforcedBlockedSeamPoint::Enforced; + case ModelVolumeType::PRECISE_SEAM_BLOCKED: + return EnforcedBlockedSeamPoint::Blocked; + case ModelVolumeType::PRECISE_SEAM_NEUTRAL: + return EnforcedBlockedSeamPoint::Neutral; + // Non-weak types are unreachable by precondition; listed to keep the switch exhaustive. + case ModelVolumeType::INVALID: + case ModelVolumeType::MODEL_PART: + case ModelVolumeType::NEGATIVE_VOLUME: + case ModelVolumeType::PARAMETER_MODIFIER: + case ModelVolumeType::SUPPORT_BLOCKER: + case ModelVolumeType::SUPPORT_ENFORCER: + case ModelVolumeType::PRECISE_SEAM_CENTER: + case ModelVolumeType::PRECISE_SEAM_LEFT: + case ModelVolumeType::PRECISE_SEAM_RIGHT: + break; + } + assert(false && "convert_weak_modifier_type called with non-weak type"); + return EnforcedBlockedSeamPoint::Neutral; +} + +// Collect all weak modifier segments for given perimeter +// Process weak modifiers (ENFORCED/BLOCKED/NEUTRAL) and collect segment boundaries +// Also insert boundary points into perimeter polygon (sorted by descending arc length) +// Split enforced edges into small segments (≤ enforcer_oversampling_distance) for precise seam placement +// Return ordered vector of segments with updated coordinates (in same order as weak_volumes list) +std::vector collect_weak_modifier_segments( + const std::vector &weak_volumes, + Polygon &polygon, + const Layer *layer, + const ModifierSlicesCache &slices_cache, + PreciseSeamWarnings* warnings) +{ + std::vector result; + + // Check input parameters + if (weak_volumes.empty() || layer == nullptr) { + return result; // Empty vector + } + + // layer->id() is offset by raft layer count, but modifier_slices is 0-based + // (built from PrintObject::layers() via slice_single_volume). Subtract raft + // offset to get the correct index into the cache. + const size_t raft_layers = layer->object()->slicing_parameters().raft_layers(); + size_t layer_id = layer->id() - raft_layers; + + // The perimeter is not modified until all weak segments have been collected. + const BoundingBox perimeter_bbox(polygon.points); + + // Iterate through all weak modifiers in hierarchy order + for (const ModelVolume* modifier_volume : weak_volumes) { + // Look up pre-sliced polygons from cache (sliced once in SeamPlacer::init). + // TODO: slice_single_volume() converts ExPolygons to flat Polygons, losing + // the association between outer contours and their holes. This makes correct + // handling of multiply-connected modifier regions (e.g. a torus cross-section) + // impossible. Consider a variant returning std::vector and adapting + // the algorithm to work with multiply-connected domains. + auto it = slices_cache.find(modifier_volume); + if (it == slices_cache.end()) + continue; // modifier not in cache (should not happen) + const std::vector &modifier_slices = it->second; + + // Check if slices exist for given layer + if (layer_id >= modifier_slices.size()) { + continue; // No slices for this layer + } + + const Polygons &modifier_polygons = modifier_slices[layer_id]; + + // Check for multiply-connected regions (holes = CW polygons). + // slice_single_volume() flattens ExPolygons into Polygons, but preserves + // orientation: CCW = outer contour, CW = hole. If any CW polygon is present, + // the modifier is multiply-connected and cannot be processed correctly. + bool has_holes = std::any_of(modifier_polygons.begin(), modifier_polygons.end(), + [](const Polygon &p) { return p.is_clockwise(); }); + if (has_holes) { + if (warnings) + warnings->multiply_connected.store(true, std::memory_order_relaxed); + continue; + } + + // Iterate through all modifier polygons on this layer + for (const Polygon &modifier_polygon : modifier_polygons) { + // Preserve touching and contained pairs for the existing clipping and warning logic. + if (!perimeter_bbox.overlap(BoundingBox(modifier_polygon.points))) + continue; + // Find intersection with perimeter + Polygons intersection_polygons = intersection(Polygons{polygon}, Polygons{modifier_polygon}); + + // Note: intersection_polygons.size() > 1 is NOT flagged as a warning here. + // For weak modifiers, multiple intersection polygons are expected (the modifier + // may legitimately cross the perimeter in several places). + // Only through-body intersections (detected by diff below) are abnormal. + + // Diff check: if modifier minus perimeter yields >1 polygon, the modifier + // passes through the model body, creating a through-body intersection. + // CW polygon in diff = hole from full containment, not through-body. + // Full containment is detected separately in common_segment_in_intersection(). + if (warnings && !warnings->through_body.load(std::memory_order_relaxed)) { + Polygons diff_polygons = diff(Polygons{modifier_polygon}, Polygons{polygon}); + if (diff_polygons.size() > 1) { + bool has_cw = std::any_of(diff_polygons.begin(), diff_polygons.end(), + [](const Polygon &p) { return p.is_clockwise(); }); + if (!has_cw) + warnings->through_body.store(true, std::memory_order_relaxed); + } + } + + // Process each intersection polygon + for (Polygon &intersection_polygon : intersection_polygons) { + // Convert intersection_polygon to CCW to guarantee same traversal direction as perimeter + intersection_polygon.make_counter_clockwise(); + + // Search for perimeter segment in this intersection + std::optional segment = common_segment_in_intersection_fast( + intersection_polygon, + polygon, + warnings + ); + + if (!segment.has_value()) { + continue; // Segment not found + } + + // Get left (first) point of segment + std::optional> left = segment_left(segment.value()); + + // Get right (last) point of segment + std::optional> right = segment_right(segment.value()); + + // If both boundaries found, add segment to result + if (left.has_value() && right.has_value()) { + result.push_back({ + convert_weak_modifier_type(modifier_volume->type()), // Type: Enforced/Blocked/Neutral + left->first, // Left point coordinates + left->second, // Perimeter vertex index for left point + right->first, // Right point coordinates + right->second // Perimeter vertex index for right point + }); + } + } + } + } + + // If no segments, return empty vector + if (result.empty()) { + return result; + } + + // Insert boundary points into perimeter polygon + // Sort points by descending arc length to avoid breaking indexing + + // 1. Parameterize polygon: calculate cumulative lengths for each vertex + std::vector cumulative_lengths(polygon.points.size() + 1); + cumulative_lengths[0] = 0.0; + for (size_t i = 0; i < polygon.points.size(); ++i) { + size_t next_i = (i + 1) % polygon.points.size(); + double edge_length = (polygon.points[next_i] - polygon.points[i]).cast().norm(); + cumulative_lengths[i + 1] = cumulative_lengths[i] + edge_length; + } + + // 2. Create helper vector for sorting: {segment index, left/right point, arc length} + struct PointToInsert { + size_t segment_idx; // Index in result + bool is_left; // true = left point, false = right point + double arc_length; // Arc length from perimeter start + }; + std::vector points_to_insert; + points_to_insert.reserve(result.size() * 2); + + for (size_t seg_idx = 0; seg_idx < result.size(); ++seg_idx) { + const WeakModifierSegment &seg = result[seg_idx]; + + // Left point + double left_base = cumulative_lengths[seg.left_idx]; + double left_offset = (seg.left_point - polygon.points[seg.left_idx]).cast().norm(); + points_to_insert.push_back({seg_idx, true, left_base + left_offset}); + + // Right point + double right_base = cumulative_lengths[seg.right_idx]; + double right_offset = (seg.right_point - polygon.points[seg.right_idx]).cast().norm(); + points_to_insert.push_back({seg_idx, false, right_base + right_offset}); + } + + // 3. Sort by descending arc length (insert distant points first) + std::sort(points_to_insert.begin(), points_to_insert.end(), + [](const PointToInsert &a, const PointToInsert &b) { + return a.arc_length > b.arc_length; + }); + + // 4. Insert points in descending arc length order + std::vector segment_valid(result.size(), true); + bool any_insertion_failed = false; + + for (const PointToInsert &pt : points_to_insert) { + WeakModifierSegment &seg = result[pt.segment_idx]; + Point &point_coords = pt.is_left ? seg.left_point : seg.right_point; + size_t edge_idx = pt.is_left ? seg.left_idx : seg.right_idx; + + // Insert point with tolerance check + std::optional> insert_result = + insert_point_into_perimeter(point_coords, edge_idx, polygon); + + if (insert_result.has_value()) { + // Update coordinates in result (if point coincided with existing vertex, take its coordinates) + point_coords = insert_result->first; + } else { + // Failed to insert point - segment becomes invalid + segment_valid[pt.segment_idx] = false; + any_insertion_failed = true; + } + } + + // 5. Remove segments whose boundaries could not be inserted + if (any_insertion_failed) { + // Critical error: boundary point not inserted (shouldn't happen in normal conditions) + BOOST_LOG_TRIVIAL(error) << "PreciseSeam: boundary point insertion failed, performing segment compaction"; + + // Remove invalid segments (array compaction) + size_t write_pos = 0; + for (size_t read_pos = 0; read_pos < result.size(); ++read_pos) { + if (segment_valid[read_pos]) { + if (write_pos != read_pos) { + result[write_pos] = std::move(result[read_pos]); + } + ++write_pos; + } + } + result.resize(write_pos); + } + + // 6. Group coincident boundaries by their snapped vertex, including wraparound to vertex 0. + // Scan original vertices backwards so insertions cannot shift pending vertex indices. + // O(vertices * segments), matching the boundary lookup below; typically only a few segments. + for (size_t poly_idx = polygon.size(); poly_idx-- > 0; ) { + bool refine_before = false; + bool refine_after = false; + for (const WeakModifierSegment &segment : result) { + refine_before |= polygon[poly_idx] == segment.left_point; + refine_after |= polygon[poly_idx] == segment.right_point; + } + // Insert after first: inserting before would shift the current vertex index. + if (refine_after) + refine_at_vertex(poly_idx, +1, polygon); + if (refine_before) + refine_at_vertex(poly_idx, -1, polygon); + } + + // 7. Split edges in enforced zones into segments ≤ enforcer_oversampling_distance + // Determine type pattern for each polygon edge (sequential application of hierarchy) + std::vector edge_types(polygon.size(), EnforcedBlockedSeamPoint::Neutral); + + // Helper lambda: search for point index in modified polygon by coordinates. + // Linear scan is intentional — O(N×M) is acceptable for typical M ≤ 5 weak segments. + auto find_point_index = [&](const Point &pt) -> std::optional { + for (size_t i = 0; i < polygon.size(); ++i) { + if (polygon[i] == pt) return i; + } + return std::nullopt; + }; + + // Apply types sequentially: segments are sorted low-priority-first + // (bottom of object tree first), so higher-priority modifiers overwrite + // lower-priority ones via last-write-wins. + for (const auto &segment : result) { + // Find boundary point indices in modified polygon + std::optional left_idx = find_point_index(segment.left_point); + std::optional right_idx = find_point_index(segment.right_point); + + if (!left_idx.has_value() || !right_idx.has_value()) { + BOOST_LOG_TRIVIAL(error) << "PreciseSeam: boundary point not found in modified polygon, skipping segment"; + continue; + } + + // Set type for edges [left_idx, right_idx] + for (size_t idx = left_idx.value(); ; idx = (idx + 1) % polygon.size()) { + edge_types[idx] = segment.type; + if (idx == right_idx.value()) break; + } + } + + // Split enforced edges into small segments + const double STEP_SCALED = scale_(SeamPlacer::enforcer_oversampling_distance); + + // Collect new list of polygon points with split enforced edges + Points new_points; + new_points.reserve(polygon.size() * 10); // Approximate estimate + + for (size_t i = 0; i < polygon.size(); ++i) { + size_t next_i = (i + 1) % polygon.size(); + Point p_start = polygon[i]; + Point p_end = polygon[next_i]; + + // Add current vertex + new_points.push_back(p_start); + + // Check edge type [i, next_i] + if (edge_types[i] != EnforcedBlockedSeamPoint::Enforced) { + continue; // Not enforced - don't split + } + + // Calculate subdivision parameters + Vec2d edge_vec = (p_end - p_start).cast(); + double edge_length = edge_vec.norm(); + + if (edge_length <= STEP_SCALED) { + continue; // Edge too short - don't split + } + + // Number of segments: ceil(L / S) + size_t num_segments = static_cast(std::ceil(edge_length / STEP_SCALED)); + + // Uniform step: L / num_segments (each segment ≤ S) + double actual_step = edge_length / num_segments; + Vec2d step_vec = edge_vec.normalized() * actual_step; + + // Add intermediate points incrementally + Vec2d current_pos = p_start.cast(); + for (size_t j = 1; j < num_segments; ++j) { + current_pos += step_vec; + new_points.push_back(current_pos.cast()); + } + } + + // Replace polygon points with new ones (with split enforced edges) + polygon.points = std::move(new_points); + + return result; +} + +// Apply weak modifier types to perimeter points based on segment boundaries. +// Find boundary points in refined polygon by coordinates and set types +// for all points inside each segment. +void apply_weak_modifiers_to_perimeter( + const std::vector &weak_segments, + PrintObjectSeamData::LayerSeams &result, + const SeamPlacerImpl::Perimeter &perimeter, + bool &some_point_enforced) +{ + // Get z-coordinate for unscaling boundary points + const float z_coord = result.points[perimeter.start_index].position.z(); + const size_t perimeter_size = perimeter.end_index - perimeter.start_index; + + // Helper lambda: search for point index in result.points by unscaled coordinates. + // Linear scan is intentional — O(N×M) is acceptable for typical M ≤ 5 weak segments. + auto find_point_index = [&](const Point &pt) -> std::optional { + Vec2f unscaled_pt = unscale(pt).cast(); + Vec3f target(unscaled_pt.x(), unscaled_pt.y(), z_coord); + for (size_t i = perimeter.start_index; i < perimeter.end_index; ++i) { + if (result.points[i].position == target) return i - perimeter.start_index; + } + return std::nullopt; + }; + + // Apply weak modifiers sequentially: sorted low-priority-first, + // so higher-priority modifiers (higher in object tree) overwrite via last-write-wins. + for (size_t seg_idx = 0; seg_idx < weak_segments.size(); ++seg_idx) { + const auto &segment = weak_segments[seg_idx]; + + // Find boundary point indices in result.points + std::optional left_idx = find_point_index(segment.left_point); + std::optional right_idx = find_point_index(segment.right_point); + + if (!left_idx.has_value() || !right_idx.has_value()) { + BOOST_LOG_TRIVIAL(error) << "PreciseSeam: boundary point not found in perimeter, skipping segment"; + continue; + } + + // Apply modifier type to range [left_idx, right_idx] with wraparound + for (size_t idx = left_idx.value(); ; idx = (idx + 1) % perimeter_size) { + result.points[perimeter.start_index + idx].type = segment.type; + if (idx == right_idx.value()) break; + } + + if (segment.type == EnforcedBlockedSeamPoint::Enforced) { + some_point_enforced = true; + } + } +} + +// Restore precise seam positions that may have been modified +void restore_precise_seam_positions(std::vector &layers) { + using SeamPlacerImpl::SeamCandidate; + using SeamPlacerImpl::Perimeter; + + tbb::parallel_for(tbb::blocked_range(0, layers.size()), + [&layers](tbb::blocked_range r) { + for (size_t layer_idx = r.begin(); layer_idx < r.end(); ++layer_idx) { + std::vector &layer_perimeter_points = layers[layer_idx].points; + // Iterate over perimeters (jump by end_index) + for (size_t current = 0; current < layer_perimeter_points.size(); + current = layer_perimeter_points[current].perimeter.end_index) { + Perimeter &perimeter = layer_perimeter_points[current].perimeter; + if (perimeter.precise_seam_point.has_value()) { + perimeter.final_seam_position = perimeter.precise_seam_point.value(); + perimeter.seam_index = perimeter.precise_seam_index; + } + } + } + }); +} + +} // namespace PreciseSeam +} // namespace Slic3r diff --git a/src/libslic3r/GCode/PreciseSeam.hpp b/src/libslic3r/GCode/PreciseSeam.hpp new file mode 100644 index 0000000000..d5c1e98952 --- /dev/null +++ b/src/libslic3r/GCode/PreciseSeam.hpp @@ -0,0 +1,146 @@ +#ifndef slic3r_PreciseSeam_hpp_ +#define slic3r_PreciseSeam_hpp_ + +#include +#include +#include +#include +#include "libslic3r/Polygon.hpp" +#include "libslic3r/Polyline.hpp" +#include "libslic3r/Model.hpp" +#include "libslic3r/Layer.hpp" +#include "libslic3r/Print.hpp" +#include "libslic3r/ClipperUtils.hpp" +#include "SeamPlacer.hpp" + +// CURRENT STATUS: +// Strong modifiers (Center/Left/Right): only one intersection per perimeter is supported, +// since there can be only one seam. Additional intersections are ignored. +// +// Weak modifiers (Enforced/Blocked/Neutral): multiple intersections are supported, +// but none of them should pass through the model entirely. A through-body intersection +// produces multiple segments, of which only one will be processed. +// +// In both cases, a pop-up warning is shown when unsupported intersections are detected. +// +// If any modifier has a multiply-connected cross-section (e.g. a hollow shape), +// it is skipped and a corresponding notification is shown. +// +// Full containment of the perimeter within modifier is not handled. +// +// FUTURE DIRECTION: +// A lightweight algorithm is needed to detect and handle through-body intersections +// for Weak modifiers. The algorithm must not slow down the 99.9% common case. +// Possible approach: if intersection passes the diff check (no through-body), +// use the current fast algorithm. If diff check fails, fall back to a heavier +// method: compute midpoints of intersection polygon edges, then check which +// midpoints lie strictly inside the modifier (not on boundary) using +// point_in_polygon. Those edges originate from the perimeter; the rest +// originate from the modifier boundary. Collect perimeter edges into a polyline. +// Additionally, multiply-connected cross-sections could be supported instead of +// being skipped entirely (e.g. by decomposing them into simple polygons). +// For Enforced and Neutral weak modifiers, full containment of the perimeter +// within modifier could be handled (currently ignored). + +namespace Slic3r { +namespace PreciseSeam { + +// Import EnforcedBlockedSeamPoint from SeamPlacerImpl namespace for convenience +using SeamPlacerImpl::EnforcedBlockedSeamPoint; + +// Pre-sliced modifier cache: ModelVolume pointer → per-layer Polygons. +// Built once in SeamPlacer::init(), then passed read-only into per-perimeter functions. +using ModifierSlicesCache = std::unordered_map>; + +// Warning flags set during Precise Seam processing (thread-safe) +struct PreciseSeamWarnings { + std::atomic multiple_intersections{false}; // modifier intersects perimeter in multiple separate places (strong only) + std::atomic through_body{false}; // modifier passes through the model body entirely + std::atomic multiply_connected{false}; // modifier has holes (multiply-connected cross-section) + std::atomic full_containment{false}; // modifier fully contains perimeter, no intersection edges +}; + +// Result of finding common segment between perimeter and intersection +struct SegmentData { + Polyline segment; // Points from intersection_polygon forming the segment + std::vector perimeter_edge_indices; // edge_index for each point in segment +}; + +// Result of weak modifier segment processing +struct WeakModifierSegment { + EnforcedBlockedSeamPoint type; // Enforced/Blocked/Neutral + Point left_point; // Coordinates of left (first) point of segment + size_t left_idx; // Perimeter vertex index for left_point + Point right_point; // Coordinates of right (last) point of segment + size_t right_idx; // Perimeter vertex index for right_point +}; + +// Initialize Precise Seam data by populating provided vectors and flag +// Collects precise seam modifiers and fills output parameters +// Call once during SeamPlacer::init() before gather_seam_candidates() +// Parameters: +// strong_volumes_out - output vector for strong modifiers (CENTER/LEFT/RIGHT) +// weak_volumes_out - output vector for weak modifiers (ENFORCED/BLOCKED/NEUTRAL) +// has_strong_out - output flag indicating presence of strong modifiers +// model_object - model object containing volumes +void init_precise_seam_data( + std::vector& strong_volumes_out, + std::vector& weak_volumes_out, + bool& has_strong_out, + const ModelObject* model_object); + +// Insert strong seam point into perimeter polygon +// Processes strong modifiers (CENTER/LEFT/RIGHT) and inserts seam point into polygon +// Parameters: +// strong_volumes - list of strong precise seam modifiers +// polygon - perimeter polygon (will be modified if point inserted) +// layer - current layer +// slices_cache - pre-sliced modifier polygons (built once in SeamPlacer::init) +// Returns: +// Coordinates of inserted point (internal units) or std::nullopt if nothing inserted +std::optional insert_strong_seam_point( + const std::vector &strong_volumes, + Polygon &polygon, + const Layer *layer, + const ModifierSlicesCache &slices_cache, + PreciseSeamWarnings* warnings = nullptr); + +// Collect all weak modifier segments for a perimeter polygon +// Processes weak modifiers (ENFORCED/BLOCKED/NEUTRAL) and collects segment boundaries +// Also inserts boundary points into the perimeter polygon (sorted by descending arc length) +// Refines enforced edges by subdividing them into segments ≤ enforcer_oversampling_distance +// Parameters: +// weak_volumes - list of weak precise seam modifiers +// polygon - perimeter polygon (will be modified with inserted points and refined edges) +// layer - current layer +// slices_cache - pre-sliced modifier polygons (built once in SeamPlacer::init) +// Returns: +// Ordered vector of segments with updated coordinates (same order as weak_volumes list) +std::vector collect_weak_modifier_segments( + const std::vector &weak_volumes, + Polygon &polygon, + const Layer *layer, + const ModifierSlicesCache &slices_cache, + PreciseSeamWarnings* warnings = nullptr); + +// Apply weak modifier types to perimeter points based on segment boundaries +// Finds boundary points in refined polygon and sets types for points within segments +// Parameters: +// weak_segments - segments with boundary coordinates and types +// result - layer seams data to modify +// perimeter - perimeter info (start/end indices) +// some_point_enforced - flag to update if Enforced points are set +void apply_weak_modifiers_to_perimeter( + const std::vector &weak_segments, + PrintObjectSeamData::LayerSeams &result, + const SeamPlacerImpl::Perimeter &perimeter, + bool &some_point_enforced); + +// Restore precise seam positions that may have been modified by alignment +// Iterates through all perimeters and restores precise_seam_point positions +void restore_precise_seam_positions(std::vector &layers); + +} // namespace PreciseSeam +} // namespace Slic3r + +#endif // slic3r_PreciseSeam_hpp_ diff --git a/src/libslic3r/GCode/SeamPlacer.cpp b/src/libslic3r/GCode/SeamPlacer.cpp index 5d7377e242..04d2360f0e 100644 --- a/src/libslic3r/GCode/SeamPlacer.cpp +++ b/src/libslic3r/GCode/SeamPlacer.cpp @@ -10,6 +10,7 @@ #include #include #include +#include #include "libslic3r/AABBTreeLines.hpp" #include "libslic3r/KDTreeIndirect.hpp" @@ -20,10 +21,12 @@ #include "libslic3r/Layer.hpp" #include "libslic3r/Geometry/Curves.hpp" +#include "libslic3r/I18N.hpp" #include "libslic3r/ShortEdgeCollapse.hpp" #include "libslic3r/TriangleSetSampling.hpp" #include "libslic3r/Utils.hpp" +#include "PreciseSeam.hpp" //#define DEBUG_FILES @@ -304,6 +307,16 @@ struct GlobalModelInfo { AABBTreeIndirect::Tree<3, float> enforcers_tree; AABBTreeIndirect::Tree<3, float> blockers_tree; + // Precise Seam modifiers: strong modifiers (CENTER/LEFT/RIGHT) determine exact seam placement + std::vector precise_seam_strong_volumes; + // Precise Seam modifiers: weak modifiers (ENFORCED/BLOCKED/NEUTRAL) provide hints for seam placement + std::vector precise_seam_weak_volumes; + + // Pre-sliced modifier polygons, keyed by ModelVolume pointer. + // Populated once in SeamPlacer::init() to avoid re-slicing on every perimeter. + // Each value is a per-layer vector of Polygons for that modifier volume. + std::unordered_map> precise_seam_slices; + bool is_enforced(const Vec3f &position, float radius) const { if (enforcers.empty()) { return false; @@ -404,7 +417,8 @@ struct GlobalModelInfo { ; //Extract perimeter polygons of the given layer -Polygons extract_perimeter_polygons(const Layer *layer, std::vector &corresponding_regions_out) { +Polygons extract_perimeter_polygons(const Layer *layer, std::vector &corresponding_regions_out, + bool has_precise_seam_modifiers) { Polygons polygons; for (const LayerRegion *layer_region : layer->regions()) { for (const ExtrusionEntity *ex_entity : layer_region->perimeters.entities) { @@ -441,6 +455,18 @@ Polygons extract_perimeter_polygons(const Layer *layer, std::vector 1 && polygon.points.front() == polygon.points.back()) + polygon.points.pop_back(); + } + } + if (polygons.empty()) { // If there are no perimeter polygons for whatever reason (disabled perimeters .. ) insert dummy point // it is easier than checking everywhere if the layer is not emtpy, no seam will be placed to this layer anyway polygons.emplace_back(Points{ { 0, 0 } }); @@ -450,17 +476,42 @@ Polygons extract_perimeter_polygons(const Layer *layer, std::vectorlayer() : nullptr; + + // Use pre-computed Precise Seam volumes from global_model_info (computed once in init) + const auto& strong_volumes = global_model_info.precise_seam_strong_volumes; + const auto& weak_volumes = global_model_info.precise_seam_weak_volumes; + + // Use pre-sliced cache from global_model_info instead of re-slicing on every call + auto seam_point = PreciseSeam::insert_strong_seam_point(strong_volumes, polygon, layer, global_model_info.precise_seam_slices, warnings); + + // Store the inserted point position for marking as central_enforcer later + std::optional inserted_seam_position; + if (seam_point.has_value()) { + Vec2f unscaled_p = unscale(seam_point.value()).cast(); + inserted_seam_position = Vec3f(unscaled_p.x(), unscaled_p.y(), z_coord); + } + + // Process weak modifiers (ENFORCED/BLOCKED/NEUTRAL) only if no strong modifier was inserted + std::vector weak_segments; + if (!inserted_seam_position.has_value()) { + weak_segments = PreciseSeam::collect_weak_modifier_segments(weak_volumes, polygon, layer, global_model_info.precise_seam_slices, warnings); + } + float angle_arm_len = region != nullptr ? region->flow(FlowRole::frExternalPerimeter).nozzle_diameter() : 0.5f; std::vector lengths { }; @@ -529,10 +580,15 @@ void process_perimeter_polygon(const Polygon &orig_polygon, float z_coord, const perimeter.end_index = result.points.size(); + // Apply weak modifiers if no strong modifier was inserted + if (!inserted_seam_position.has_value() && !weak_segments.empty()) { + PreciseSeam::apply_weak_modifiers_to_perimeter( + weak_segments, result, perimeter, some_point_enforced); + } + if (some_point_enforced) { - // We will patches of enforced points (patch: continuous section of enforced points), choose - // the longest patch, and select the middle point or sharp point (depending on the angle) - // this point will have high priority on this perimeter + // Choose the continuous enforced patch with the most candidates, then select its middle + // candidate or a sharp corner. Patch length here is a point count, not geometric distance. size_t perimeter_size = perimeter.end_index - perimeter.start_index; const auto next_index = [&](size_t idx) { return perimeter.start_index + Slic3r::next_idx_modulo(idx - perimeter.start_index, perimeter_size); @@ -563,7 +619,9 @@ void process_perimeter_polygon(const Polygon &orig_polygon, float z_coord, const std::pair longest_patch { 0, 0 }; auto patch_len = [perimeter_size](const std::pair &start_end) { if (start_end.second < start_end.first) { - return start_end.first + (perimeter_size - start_end.second); + // Count [start, end) across the closing edge, independently of the contour's start. + // Subtract indices first: they are offsets in the layer, not local perimeter indices. + return perimeter_size - (start_end.first - start_end.second); } else { return start_end.second - start_end.first; } @@ -596,30 +654,24 @@ void process_perimeter_polygon(const Polygon &orig_polygon, float z_coord, const } } -} - -// Get index of previous and next perimeter point of the layer. Because SeamCandidates of all polygons of the given layer -// are sequentially stored in the vector, each perimeter contains info about start and end index. These vales are used to -// deduce index of previous and next neigbour in the corresponding perimeter. -std::pair find_previous_and_next_perimeter_point(const std::vector &perimeter_points, - size_t point_index) { - const SeamCandidate ¤t = perimeter_points[point_index]; - int prev = point_index - 1; //for majority of points, it is true that neighbours lie behind and in front of them in the vector - int next = point_index + 1; - - if (point_index == current.perimeter.start_index) { - // if point_index is equal to start, it means that the previous neighbour is at the end - prev = current.perimeter.end_index; + // Apply precise seam point if it was inserted + if (inserted_seam_position.has_value()) { + // Set single point as Enforced, block all others + for (size_t i = perimeter.start_index; i < perimeter.end_index; ++i) { + if (result.points[i].position == inserted_seam_position.value()) { + // Mark as the single enforced point with highest priority + result.points[i].type = EnforcedBlockedSeamPoint::Enforced; + result.points[i].central_enforcer = true; + perimeter.precise_seam_point = inserted_seam_position; + perimeter.precise_seam_index = i; + } else { + // Block all other points + result.points[i].type = EnforcedBlockedSeamPoint::Blocked; + result.points[i].central_enforcer = false; + } + } } - if (point_index == current.perimeter.end_index - 1) { - // if point_index is equal to end, than next neighbour is at the start - next = current.perimeter.start_index; - } - - assert(prev >= 0); - assert(next >= 0); - return {size_t(prev),size_t(next)}; } // Computes all global model info - transforms object, performs raycasting @@ -637,7 +689,9 @@ void compute_global_occlusion(GlobalModelInfo &result, const PrintObject *po, || model_volume->type() == ModelVolumeType::NEGATIVE_VOLUME) { auto model_transformation = model_volume->get_matrix(); indexed_triangle_set model_its = model_volume->mesh().its; - // ORCA: Mirrored transforms flip winding, keep normals outward + // ORCA fix (not related to Precise Seam, discovered during its development): + // Mirror transforms have negative determinant which flips triangle winding. + // fix_left_handed=true swaps indices to keep normals pointing outward. its_transform(model_its, model_transformation, true); if (model_volume->type() == ModelVolumeType::MODEL_PART) { its_merge(triangle_set, model_its); @@ -658,7 +712,10 @@ void compute_global_occlusion(GlobalModelInfo &result, const PrintObject *po, size_t negative_volumes_start_index = triangle_set.indices.size(); its_merge(triangle_set, negative_volumes_set); - // ORCA: Mirroring flips normals, keep them outward for visibility sampling + // ORCA fix (not related to Precise Seam, discovered during its development): + // Object-level transform may include mirroring (negative determinant), + // which inverts triangle winding. fix_left_handed=true corrects this + // so visibility ray sampling sees outward-facing normals. its_transform(triangle_set, obj_transform, true); BOOST_LOG_TRIVIAL(debug) << "SeamPlacer: decimate: end"; @@ -720,12 +777,12 @@ void gather_enforcers_blockers(GlobalModelInfo &result, const PrintObject *po) { auto model_transformation = obj_transform * mv->get_matrix(); indexed_triangle_set enforcers = mv->seam_facets.get_facets(*mv, EnforcerBlockerType::ENFORCER); - // ORCA: Keep normals outward when mirroring seam enforcers + // ORCA fix (not related to Precise Seam): fix winding for mirrored transforms its_transform(enforcers, model_transformation, true); its_merge(result.enforcers, enforcers); indexed_triangle_set blockers = mv->seam_facets.get_facets(*mv, EnforcerBlockerType::BLOCKER); - // ORCA: Keep normals outward when mirroring seam blockers + // ORCA fix (not related to Precise Seam): fix winding for mirrored transforms its_transform(blockers, model_transformation, true); its_merge(result.blockers, blockers); } @@ -1012,13 +1069,14 @@ void pick_random_seam_point(const std::vector &perimeter_points, // Parallel process and extract each perimeter polygon of the given print object. // Gather SeamCandidates of each layer into vector and build KDtree over them // Store results in the SeamPlacer variables m_seam_per_object -void SeamPlacer::gather_seam_candidates(const PrintObject *po, const SeamPlacerImpl::GlobalModelInfo &global_model_info) { +void SeamPlacer::gather_seam_candidates(const PrintObject *po, const SeamPlacerImpl::GlobalModelInfo &global_model_info, + PreciseSeam::PreciseSeamWarnings* warnings) { using namespace SeamPlacerImpl; PrintObjectSeamData &seam_data = m_seam_per_object.emplace(po, PrintObjectSeamData { }).first->second; seam_data.layers.resize(po->layer_count()); tbb::parallel_for(tbb::blocked_range(0, po->layers().size()), - [po, &global_model_info, &seam_data] + [po, &global_model_info, &seam_data, warnings] (tbb::blocked_range r) { for (size_t layer_idx = r.begin(); layer_idx < r.end(); ++layer_idx) { PrintObjectSeamData::LayerSeams &layer_seams = seam_data.layers[layer_idx]; @@ -1026,10 +1084,13 @@ void SeamPlacer::gather_seam_candidates(const PrintObject *po, const SeamPlacerI auto unscaled_z = layer->slice_z; std::vector regions; //NOTE corresponding region ptr may be null, if the layer has zero perimeters - Polygons polygons = extract_perimeter_polygons(layer, regions); + const bool has_precise_seam_modifiers = !global_model_info.precise_seam_strong_volumes.empty() || + !global_model_info.precise_seam_weak_volumes.empty(); + Polygons polygons = extract_perimeter_polygons(layer, regions, has_precise_seam_modifiers); for (size_t poly_index = 0; poly_index < polygons.size(); ++poly_index) { process_perimeter_polygon(polygons[poly_index], unscaled_z, - regions[poly_index], global_model_info, layer_seams); + regions[poly_index], global_model_info, layer_seams, + warnings); } auto functor = SeamCandidateCoordinateFunctor { layer_seams.points }; seam_data.layers[layer_idx].points_tree = @@ -1429,10 +1490,13 @@ void SeamPlacer::align_seam_points(const PrintObject *po, const SeamPlacerImpl:: } -void SeamPlacer::init(const Print &print, std::function throw_if_canceled_func) { +void SeamPlacer::init(Print &print, std::function throw_if_canceled_func) { using namespace SeamPlacerImpl; m_seam_per_object.clear(); + // Warning flags for Precise Seam processing — shared across all objects + PreciseSeam::PreciseSeamWarnings precise_seam_warnings; + for (const PrintObject *po : print.objects()) { throw_if_canceled_func(); SeamPosition configured_seam_preference = po->config().seam_position.value; @@ -1441,14 +1505,29 @@ void SeamPlacer::init(const Print &print, std::function throw_if_can { GlobalModelInfo global_model_info { }; gather_enforcers_blockers(global_model_info, po); + PreciseSeam::init_precise_seam_data( + global_model_info.precise_seam_strong_volumes, + global_model_info.precise_seam_weak_volumes, + m_seam_per_object[po].has_precise_seam_strong_volumes, + po->model_object()); + + // Pre-slice all precise seam modifier volumes once per object. + // Without this cache, slice_single_volume() would be called for every + // modifier × every perimeter × every layer — thousands of redundant slicing operations. + for (const ModelVolume* vol : global_model_info.precise_seam_strong_volumes) + global_model_info.precise_seam_slices[vol] = po->slice_single_volume(vol); + for (const ModelVolume* vol : global_model_info.precise_seam_weak_volumes) + global_model_info.precise_seam_slices[vol] = po->slice_single_volume(vol); + throw_if_canceled_func(); if (configured_seam_preference == spAligned || configured_seam_preference == spNearest || configured_seam_preference == spAlignedBack) { compute_global_occlusion(global_model_info, po, throw_if_canceled_func, configured_seam_preference); } throw_if_canceled_func(); + BOOST_LOG_TRIVIAL(debug) << "SeamPlacer: gather_seam_candidates: start"; - gather_seam_candidates(po, global_model_info); + gather_seam_candidates(po, global_model_info, &precise_seam_warnings); BOOST_LOG_TRIVIAL(debug) << "SeamPlacer: gather_seam_candidates: end"; throw_if_canceled_func(); @@ -1496,10 +1575,49 @@ void SeamPlacer::init(const Print &print, std::function throw_if_can << "SeamPlacer: align_seam_points : end"; } + // Restore precise seam positions that were potentially modified + if (m_seam_per_object[po].has_precise_seam_strong_volumes) { + PreciseSeam::restore_precise_seam_positions(m_seam_per_object[po].layers); + } + #ifdef DEBUG_FILES debug_export_points(m_seam_per_object[po].layers, po->bounding_box(), comparator); #endif } + + // Show Precise Seam warnings (once for all objects). + // Only ONE active_step_add_warning() call — multiple calls generate multiple UI events, + // each re-pushing ALL current warnings via Plater handler, causing NotificationManager::append() + // to duplicate text within each popup. + { + const bool mi = precise_seam_warnings.multiple_intersections.load(std::memory_order_relaxed); + const bool tb = precise_seam_warnings.through_body.load(std::memory_order_relaxed); + const bool mc = precise_seam_warnings.multiply_connected.load(std::memory_order_relaxed); + const bool fc = precise_seam_warnings.full_containment.load(std::memory_order_relaxed); + std::vector parts; + if (mi) + parts.push_back(_u8L("multiple intersections with a perimeter detected")); + if (tb) + parts.push_back(_u8L("modifier fully crosses the printable perimeter")); + if (mc) + parts.push_back(_u8L("modifier shape is not solid (has holes inside) and was ignored")); + if (fc) + parts.push_back(_u8L("perimeter is fully contained inside modifier and was ignored")); + if (!parts.empty()) { + // One line: the export warnings dialog shows only the first line of each warning. + std::string warning_text = _u8L("Precise Seam") + ": "; + for (size_t i = 0; i < parts.size(); ++i) { + if (i > 0) warning_text += "; "; + warning_text += parts[i]; + } + warning_text += ". "; + warning_text += _u8L("Seam placement may differ from expected."); + print.active_step_add_warning( + PrintStateBase::WarningLevel::NON_CRITICAL, + warning_text, + PrintStateBase::SlicingPreciseSeamWarning); + } + } } void SeamPlacer::place_seam(const Layer *layer, ExtrusionLoop &loop, diff --git a/src/libslic3r/GCode/SeamPlacer.hpp b/src/libslic3r/GCode/SeamPlacer.hpp index 8a973d0d8a..9855b4f4aa 100644 --- a/src/libslic3r/GCode/SeamPlacer.hpp +++ b/src/libslic3r/GCode/SeamPlacer.hpp @@ -18,6 +18,7 @@ namespace Slic3r { class PrintObject; +namespace PreciseSeam { struct PreciseSeamWarnings; } class ExtrusionLoop; class Print; class Layer; @@ -41,7 +42,7 @@ enum class EnforcedBlockedSeamPoint { // struct representing single perimeter loop struct Perimeter { size_t start_index{}; - size_t end_index{}; //inclusive! + size_t end_index{}; //exclusive (one-past-the-end) size_t seam_index{}; float flow_width{}; @@ -50,6 +51,10 @@ struct Perimeter { // Random position also uses this flexibility to set final seam point position bool finalized = false; Vec3f final_seam_position = Vec3f::Zero(); + + // Stores precise seam coordinates found by Precise Seam modifiers + std::optional precise_seam_point; + size_t precise_seam_index{}; }; //Struct over which all processing of perimeters is done. For each perimeter point, its respective candidate is created, @@ -102,6 +107,9 @@ struct PrintObjectSeamData // Map of PrintObjects (PO) -> vector of layers of PO -> unique_ptr to KD // tree of all points of the given layer + // Indicates presence of strong Precise Seam modifiers (CENTER/LEFT/RIGHT) for this object + bool has_precise_seam_strong_volumes = false; + void clear() { layers.clear(); @@ -141,11 +149,12 @@ public: //The following data structures hold all perimeter points for all PrintObject. std::unordered_map m_seam_per_object; - void init(const Print &print, std::function throw_if_canceled_func); + void init(Print &print, std::function throw_if_canceled_func); void place_seam(const Layer *layer, ExtrusionLoop &loop, const Point &last_pos, float& overhang) const; private: - void gather_seam_candidates(const PrintObject *po, const SeamPlacerImpl::GlobalModelInfo &global_model_info); + void gather_seam_candidates(const PrintObject *po, const SeamPlacerImpl::GlobalModelInfo &global_model_info, + PreciseSeam::PreciseSeamWarnings* warnings = nullptr); void calculate_candidates_visibility(const PrintObject *po, const SeamPlacerImpl::GlobalModelInfo &global_model_info); void calculate_overhangs_and_layer_embedding(const PrintObject *po); diff --git a/src/libslic3r/GCode/WipeTower.cpp b/src/libslic3r/GCode/WipeTower.cpp index eaf8a2eaf3..a700ada09f 100644 --- a/src/libslic3r/GCode/WipeTower.cpp +++ b/src/libslic3r/GCode/WipeTower.cpp @@ -49,6 +49,48 @@ std::vector compute_compacted_wipe_tower_z(const std::vector &layer_tool_changes) +{ + return ! layer_tool_changes.empty() && layer_tool_changes.front().combined_away; +} + +std::vector combine_sparse_wipe_tower_layers(std::vector &layer_height, + const std::vector &layer_is_sparse, + const std::vector &max_layer_height, + size_t first_layer_idx) +{ + assert(layer_is_sparse.size() == layer_height.size() && max_layer_height.size() == layer_height.size()); + std::vector combined_away(layer_height.size(), 0); + float pending_height = 0.f; // what the layers folded away so far add up to + for (size_t i = 0; i < layer_height.size(); ++i) { + // A toolchange has to purge at its own z, so it neither folds away nor takes over the run + // below it - and a run always flushes on its own last layer, so nothing is ever pending here. + if (! layer_is_sparse[i] || i <= first_layer_idx) { + pending_height = 0.f; + continue; + } + const float merged = pending_height + layer_height[i]; + // Hand the run on only if the next layer can swallow the whole thing; a layer already past + // the cap is left alone rather than shrunk. + const bool next_takes_it = i + 1 < layer_height.size() && layer_is_sparse[i + 1] && + merged + layer_height[i + 1] <= max_layer_height[i + 1] + float(EPSILON); + if (next_takes_it) { + combined_away[i] = 1; + pending_height = merged; + } else { + layer_height[i] = merged; + pending_height = 0.f; + } + } + return combined_away; +} + inline float align_round(float value, float base) { return std::round(value / base) * base; @@ -1904,6 +1946,7 @@ WipeTower::WipeTower(const PrintConfig& config, int plate_idx, Vec3d plate_origi //m_bridging(float(config.wipe_tower_bridging)), m_bridging(10.f), m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(config)), + m_sparse_layers_combined(wipe_tower_sparse_layers_combined(config)), m_gcode_flavor(config.gcode_flavor), m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))), m_current_tool(initial_tool), @@ -2028,6 +2071,16 @@ void WipeTower::set_extruder(size_t idx, const PrintConfig& config) float nozzle_diameter = float(config.nozzle_diameter.get_at(idx)); m_filpar[idx].nozzle_diameter = nozzle_diameter; // to be used in future with (non-single) multiextruder MM + // Orca: max_layer_height is per nozzle, so read it through the filament->nozzle map rather than + // by filament id. Zero means three quarters of the nozzle diameter, as in Slicing.cpp. + { + const std::vector &filament_map = config.filament_map.values; // 1 based nozzle indices + const size_t nozzle_idx = idx < filament_map.size() && filament_map[idx] > 0 ? size_t(filament_map[idx] - 1) : 0; + const float max_layer_height = float(config.max_layer_height.get_at(nozzle_idx)); + m_filpar[idx].max_layer_height = max_layer_height > 0.f ? max_layer_height + : 0.75f * float(config.nozzle_diameter.get_at(nozzle_idx)); + } + float max_vol_speed = float(config.filament_max_volumetric_speed.get_at(idx)); if (max_vol_speed!= 0.f) m_filpar[idx].max_e_speed = (max_vol_speed / filament_area()); @@ -3001,7 +3054,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer(bool extrude_perimeter, bool // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (! m_sparse_layers_skipped || toolchanges_on_layer) + if (layer_is_printed(toolchanges_on_layer)) if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length(); @@ -3898,7 +3951,7 @@ WipeTower::ToolChangeResult WipeTower::finish_layer_new(bool extrude_perimeter, // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (!m_sparse_layers_skipped || toolchanges_on_layer) + if (layer_is_printed(toolchanges_on_layer)) if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length(); @@ -4008,7 +4061,7 @@ WipeTower::ToolChangeResult WipeTower::finish_block(const WipeTowerBlock &block, // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (!m_sparse_layers_skipped || toolchanges_on_layer) + if (layer_is_printed(toolchanges_on_layer)) if (filament_id < m_used_filament_length.size()) m_used_filament_length[filament_id] += writer.get_and_reset_used_filament_length(); @@ -4125,7 +4178,7 @@ WipeTower::ToolChangeResult WipeTower::finish_block_solid(const WipeTowerBlock & // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (!m_sparse_layers_skipped || toolchanges_on_layer) + if (layer_is_printed(toolchanges_on_layer)) if (filament_id < m_used_filament_length.size()) m_used_filament_length[filament_id] += writer.get_and_reset_used_filament_length(); @@ -4668,6 +4721,15 @@ void WipeTower::calc_block_infill_gap() m_extra_spacing = 1.f; } +// A folded layer is generated like any other but thrown away by the emitter, so its extrusions must +// not be charged to the filament used. +bool WipeTower::layer_is_printed(bool toolchanges_on_layer) const +{ + if (m_layer_info != m_plan.end() && m_layer_info->combined_away) + return false; + return ! m_sparse_layers_skipped || toolchanges_on_layer; +} + void WipeTower::plan_tower_new() { if (m_wipe_tower_brim_width < 0) m_wipe_tower_brim_width = get_auto_brim_by_height(m_wipe_tower_height); @@ -4820,6 +4882,9 @@ void WipeTower::generate_new(std::vector tool_changes; @@ -700,6 +711,62 @@ std::vector compute_compacted_wipe_tower_z(const std::vector &layer_tool_changes); + +// Folds runs of sparse layers into one. layer_height is raised in place on the layer that prints a +// run - always its last, so the merged extrusion lands on top of what it covers - and the returned +// mask marks the layers that now print nothing. A run stops growing once one more layer would pass +// max_layer_height of the nozzle that prints it. first_layer_idx and below never combine: the +// tower's first layer carries the brim. +std::vector combine_sparse_wipe_tower_layers(std::vector &layer_height, + const std::vector &layer_is_sparse, + const std::vector &max_layer_height, + size_t first_layer_idx); + +// Applies the rule above to a planned tower. Either generator's plan fits: both carry height, +// tool_changes and combined_away per layer, and index their filament parameters by tool. +template +void combine_sparse_wipe_tower_plan(PlanLayers &plan, const FilamentParams &filpar, size_t first_layer_idx, size_t initial_tool) +{ + const size_t n = plan.size(); + std::vector heights(n); + std::vector sparse(n); + std::vector caps(n); + + // A layer with no toolchange prints with the filament the layer below left loaded. + size_t tool = initial_tool; + for (const auto &layer : plan) + if (! layer.tool_changes.empty()) { + tool = layer.tool_changes.front().old_tool; + break; + } + for (size_t i = 0; i < n; ++i) { + heights[i] = plan[i].height; + sparse[i] = plan[i].tool_changes.empty() ? 1 : 0; + caps[i] = tool < filpar.size() ? filpar[tool].max_layer_height : 0.f; + if (! plan[i].tool_changes.empty()) + tool = plan[i].tool_changes.back().new_tool; + } + + const std::vector combined_away = combine_sparse_wipe_tower_layers(heights, sparse, caps, first_layer_idx); + for (size_t i = 0; i < n; ++i) { + plan[i].height = heights[i]; + plan[i].combined_away = combined_away[i] != 0; + } +} + + } // namespace Slic3r #endif // WipeTowerPrusaMM_hpp_ diff --git a/src/libslic3r/GCode/WipeTower2.cpp b/src/libslic3r/GCode/WipeTower2.cpp index 0080094270..a576172a39 100644 --- a/src/libslic3r/GCode/WipeTower2.cpp +++ b/src/libslic3r/GCode/WipeTower2.cpp @@ -1033,6 +1033,7 @@ WipeTower2::WipeTower2(const PrintConfig& config, const PrintRegionConfig& defau m_z_pos(0.f), m_bridging(float(config.wipe_tower_bridging)), m_sparse_layers_skipped(wipe_tower_sparse_layers_skipped(config)), + m_sparse_layers_combined(wipe_tower_sparse_layers_combined(config)), m_gcode_flavor(config.gcode_flavor), m_travel_speed(config.travel_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))), m_infill_speed(default_region_config.sparse_infill_speed.get_at(get_extruder_index(config, (unsigned int)initial_tool))), @@ -1150,6 +1151,16 @@ void WipeTower2::set_extruder(size_t idx, const PrintConfig& config) float nozzle_diameter = float(config.nozzle_diameter.get_at(idx)); m_filpar[idx].nozzle_diameter = nozzle_diameter; // to be used in future with (non-single) multiextruder MM + // Orca: max_layer_height is per nozzle, so read it through the filament->nozzle map rather than + // by filament id. Zero means three quarters of the nozzle diameter, as in Slicing.cpp. + { + const std::vector &filament_map = config.filament_map.values; // 1 based nozzle indices + const size_t nozzle_idx = idx < filament_map.size() && filament_map[idx] > 0 ? size_t(filament_map[idx] - 1) : 0; + const float max_layer_height = float(config.max_layer_height.get_at(nozzle_idx)); + m_filpar[idx].max_layer_height = max_layer_height > 0.f ? max_layer_height + : 0.75f * float(config.nozzle_diameter.get_at(nozzle_idx)); + } + float max_vol_speed = float(config.filament_max_volumetric_speed.get_at(idx)); if (max_vol_speed!= 0.f) m_filpar[idx].max_e_speed = (max_vol_speed / filament_area()); @@ -2103,7 +2114,9 @@ WipeTower::ToolChangeResult WipeTower2::finish_layer() // Ask our writer about how much material was consumed. // Skip this in case the layer is sparse and config option to not print sparse layers is enabled. - if (! m_sparse_layers_skipped || toolchanges_on_layer || first_layer) { + // A folded layer prints nothing, so it consumes nothing and adds no height of its own. + const bool combined_away = m_layer_info != m_plan.end() && m_layer_info->combined_away; + if ((! m_sparse_layers_skipped || toolchanges_on_layer || first_layer) && ! combined_away) { if (m_current_tool < m_used_filament_length.size()) m_used_filament_length[m_current_tool] += writer.get_and_reset_used_filament_length(); m_current_height += m_layer_info->height; @@ -2435,6 +2448,10 @@ void WipeTower2::generate(std::vector> if (m_plan.empty()) return; + // Before planning: the layer heights this rewrites feed the extrusion flow of every later pass. + if (m_sparse_layers_combined) + combine_sparse_wipe_tower_plan(m_plan, m_filpar, m_first_layer_idx, m_current_tool); + plan_tower(); #if 1 for (int i=0;i<5;++i) { @@ -2533,6 +2550,10 @@ void WipeTower2::generate(std::vector> layer_result[idx] = merge_tcr(layer_result[idx], finish_layer_tcr); } + if (layer.combined_away) + for (WipeTower::ToolChangeResult &tcr : layer_result) + tcr.combined_away = true; + result.emplace_back(std::move(layer_result)); if (m_used_filament_length_until_layer.empty() || m_used_filament_length_until_layer.back().first != layer.z) diff --git a/src/libslic3r/GCode/WipeTower2.hpp b/src/libslic3r/GCode/WipeTower2.hpp index eb3a2562fb..02ce15672b 100644 --- a/src/libslic3r/GCode/WipeTower2.hpp +++ b/src/libslic3r/GCode/WipeTower2.hpp @@ -200,6 +200,8 @@ public: float tower_interface_pre_extrusion_length = 0.f; float tower_ironing_area = 4.f; float tower_interface_purge_length = 0.f; + // Tallest layer this filament's nozzle can lay down; caps the sparse layer combination. + float max_layer_height = 0.f; }; private: @@ -268,6 +270,7 @@ private: float m_extra_loading_move = 0.f; float m_bridging = 0.f; bool m_sparse_layers_skipped = false; + bool m_sparse_layers_combined = false; bool m_set_extruder_trimpot = false; bool m_adhesion = true; GCodeFlavor m_gcode_flavor; @@ -368,6 +371,8 @@ private: float z; // z position of the layer float height; // layer height float depth; // depth of the layer based on all layers above + // Folded into a later, thicker layer, so this one prints nothing at all. + bool combined_away{false}; float toolchanges_depth() const { float sum = 0.f; for (const auto &a : tool_changes) sum += a.required_depth; return sum; } std::vector tool_changes; diff --git a/src/libslic3r/LifecycleEvents.hpp b/src/libslic3r/LifecycleEvents.hpp new file mode 100644 index 0000000000..f3e6f32392 --- /dev/null +++ b/src/libslic3r/LifecycleEvents.hpp @@ -0,0 +1,249 @@ +#pragma once + +// LifecycleEvents.hpp +// -------------------- +// Application lifecycle events (project, slicing, plate editing, preset, printer connection, and +// job activity) that other subsystems -- chiefly the plugin layer above libslic3r -- may want to +// observe. Lives in libslic3r rather than the plugin layer because some events fire from inside +// the slicing engine itself; see fire_lifecycle_event() below. + +#include +#include +#include +#include +#include +#include + +namespace Slic3r +{ + enum class LifecycleEvent { + // Project (3mf) + NewProject, + ProjectOpened, + ProjectBeforeSave, + ProjectAfterSave, + ProjectClosed, + ProjectDirtyChanged, + + // Slicing pipeline + SliceStarted, + SliceGeometryFinished, + GCodeExportStarted, + GCodeExportFinished, + SlicingJobComplete, + + // Plate/model editing + ObjectAdded, + ObjectDeleted, + ObjectTransformed, + ObjectChanged, + ObjectRenamed, + PlateCreated, + PlateDeleted, + PlateSelected, + PlateRenamed, + + // Preset + PresetSelected, + PresetSaved, + + // Printer/device + PrintStateChanged, + DeviceOnline, + DeviceOffline, + DeviceDiscovered, + DeviceSelected, + UploadStarted, + UploadFinished, + + // Print/send jobs + PrintJobStarted, + PrintJobFinished, + SendJobStarted, + SendJobFinished, + }; + + // Scoped so callers must qualify (LifecycleEvtCode::Error, not ERROR) -- ERROR/OK collide with + // Windows macros (wingdi.h) as unqualified names. + enum class LifecycleEvtCode { Ok, Error, Warn }; + + struct LifecycleEventContext + { + // The primary subject identifier for the event. This is event-specific (for example, a + // project/output path, preset name, device id, or object name), must not contain status or + // prose, and may be empty when the event has no single subject. + std::string name; + + // Outcome of the operation represented by the event. For state-change and start events, + // Ok means that the event occurred; it does not imply that a future operation succeeded. + LifecycleEvtCode code = LifecycleEvtCode::Ok; + + // Optional human-readable detail or diagnostic text. It is not a stable parsing contract; + // machine-readable data should be represented by a dedicated field or event instead. + std::string msg; + + // Stable subject/object identifier, when the source model provides one. + std::string id; + + // Previous value for rename and other before/after events. + std::string previous_name; + + // Device identifier for printer and job events. + std::string device_id; + + // Job identifier when the originating queue/task provides one. + std::string job_id; + + // Source subsystem or operation detail, suitable for filtering but not guaranteed to be + // exhaustive across versions. + std::string source; + + // Plate, object, or volume index when the source uses an index rather than a stable id. + int index = -1; + + // Aggregate project dirty state for ProjectDirtyChanged. + bool dirty = false; + + // Optional host-side cancellation probe. Background slicing and G-code export events set + // this to the originating Print's cancellation state so dispatch can stop before calling + // the next capability. It is intentionally not exposed through the Python payload API. + std::function cancellation_check; + }; + + inline std::string lifecycle_event_to_string(LifecycleEvent event) + { + switch (event) { + case LifecycleEvent::NewProject: return "NewProject"; + case LifecycleEvent::ProjectOpened: return "ProjectOpened"; + case LifecycleEvent::ProjectBeforeSave: return "ProjectBeforeSave"; + case LifecycleEvent::ProjectAfterSave: return "ProjectAfterSave"; + case LifecycleEvent::ProjectClosed: return "ProjectClosed"; + case LifecycleEvent::ProjectDirtyChanged: return "ProjectDirtyChanged"; + + case LifecycleEvent::SliceStarted: return "SliceStarted"; + case LifecycleEvent::SliceGeometryFinished: return "SliceGeometryFinished"; + case LifecycleEvent::GCodeExportStarted: return "GCodeExportStarted"; + case LifecycleEvent::GCodeExportFinished: return "GCodeExportFinished"; + case LifecycleEvent::SlicingJobComplete: return "SlicingJobComplete"; + + case LifecycleEvent::ObjectAdded: return "ObjectAdded"; + case LifecycleEvent::ObjectDeleted: return "ObjectDeleted"; + case LifecycleEvent::ObjectTransformed: return "ObjectTransformed"; + case LifecycleEvent::ObjectChanged: return "ObjectChanged"; + case LifecycleEvent::ObjectRenamed: return "ObjectRenamed"; + case LifecycleEvent::PlateCreated: return "PlateCreated"; + case LifecycleEvent::PlateDeleted: return "PlateDeleted"; + case LifecycleEvent::PlateSelected: return "PlateSelected"; + case LifecycleEvent::PlateRenamed: return "PlateRenamed"; + + case LifecycleEvent::PresetSelected: return "PresetSelected"; + case LifecycleEvent::PresetSaved: return "PresetSaved"; + case LifecycleEvent::PrintStateChanged: return "PrintStateChanged"; + + case LifecycleEvent::DeviceOnline: return "DeviceOnline"; + case LifecycleEvent::DeviceOffline: return "DeviceOffline"; + case LifecycleEvent::DeviceDiscovered: return "DeviceDiscovered"; + case LifecycleEvent::DeviceSelected: return "DeviceSelected"; + + case LifecycleEvent::UploadStarted: return "UploadStarted"; + case LifecycleEvent::UploadFinished: return "UploadFinished"; + case LifecycleEvent::PrintJobStarted: return "PrintJobStarted"; + case LifecycleEvent::PrintJobFinished: return "PrintJobFinished"; + case LifecycleEvent::SendJobStarted: return "SendJobStarted"; + case LifecycleEvent::SendJobFinished: return "SendJobFinished"; + default: return "Unknown"; + } + } + + inline std::string lifecycle_evt_code_to_string(LifecycleEvtCode code) + { + switch (code) { + case LifecycleEvtCode::Ok: return "Ok"; + case LifecycleEvtCode::Error: return "Error"; + case LifecycleEvtCode::Warn: return "Warn"; + default: return "Unknown"; + } + } + + // Global cross-layer seam (mirrors ConfigBase::set_resolve_capability_fn): any libslic3r code can + // fire a lifecycle event without depending on the plugin layer above it, which installs the + // dispatcher here at startup. Not tied to Print/GCode specifically, since nothing here should + // require callers to hold a Print& just to report an event. + using LifecycleHookFn = std::function; + + namespace detail { + + struct LifecycleHookState + { + std::mutex mutex; + std::condition_variable cv; + LifecycleHookFn fn; + std::size_t active_dispatches = 0; + bool accepting = false; + }; + + inline LifecycleHookState& lifecycle_hook_state() + { + static LifecycleHookState state; + return state; + } + + class LifecycleDispatchGuard + { + public: + explicit LifecycleDispatchGuard(LifecycleHookState& state) : m_state(state) {} + + ~LifecycleDispatchGuard() + { + std::lock_guard lock(m_state.mutex); + --m_state.active_dispatches; + if (m_state.active_dispatches == 0) + m_state.cv.notify_all(); + } + + LifecycleDispatchGuard(const LifecycleDispatchGuard&) = delete; + LifecycleDispatchGuard& operator=(const LifecycleDispatchGuard&) = delete; + + private: + LifecycleHookState& m_state; + }; + + } // namespace detail + + // Installing a hook starts accepting dispatches. Passing an empty function stops accepting + // new dispatches, detaches the hook, and waits for callbacks already in progress to finish. + // This is used during plugin shutdown so plugin code cannot be unloaded while a lifecycle + // callback is still executing. The empty-function path must not be called from inside the + // lifecycle callback itself. + inline void set_lifecycle_hook_fn(LifecycleHookFn fn) + { + detail::LifecycleHookState& state = detail::lifecycle_hook_state(); + if (fn) { + std::lock_guard lock(state.mutex); + state.fn = std::move(fn); + state.accepting = true; + return; + } + + std::unique_lock lock(state.mutex); + state.accepting = false; + state.fn = nullptr; + state.cv.wait(lock, [&state] { return state.active_dispatches == 0; }); + } + + inline void fire_lifecycle_event(LifecycleEvent event, const LifecycleEventContext& ctx) + { + detail::LifecycleHookState& state = detail::lifecycle_hook_state(); + LifecycleHookFn fn; + { + std::lock_guard lock(state.mutex); + if (!state.accepting || !state.fn) + return; + fn = state.fn; + ++state.active_dispatches; + } + + detail::LifecycleDispatchGuard guard(state); + fn(event, ctx); + } +} diff --git a/src/libslic3r/Model.cpp b/src/libslic3r/Model.cpp index eb68b50597..fbc299cf72 100644 --- a/src/libslic3r/Model.cpp +++ b/src/libslic3r/Model.cpp @@ -23,6 +23,7 @@ #include "libslic3r/Geometry/ConvexHull.hpp" +#include #include #include @@ -1229,6 +1230,7 @@ ModelObject& ModelObject::assign_copy(const ModelObject &rhs) this->volumes.emplace_back(new ModelVolume(*model_volume)); this->volumes.back()->set_model_object(this); } + this->clear_instances(); this->instances.reserve(rhs.instances.size()); for (const ModelInstance *model_instance : rhs.instances) { @@ -1267,6 +1269,7 @@ ModelObject& ModelObject::assign_copy(ModelObject &&rhs) rhs.volumes.clear(); for (ModelVolume *model_volume : this->volumes) model_volume->set_model_object(this); + this->clear_instances(); this->instances = std::move(rhs.instances); rhs.instances.clear(); @@ -1390,7 +1393,9 @@ ModelVolume* ModelObject::add_volume_with_shared_mesh(const ModelVolume &other, void ModelObject::delete_volume(size_t idx) { ModelVolumePtrs::iterator i = this->volumes.begin() + idx; - delete *i; + ModelVolume* volume_to_delete = *i; + + delete volume_to_delete; this->volumes.erase(i); if (this->volumes.size() == 1) @@ -1449,6 +1454,20 @@ void ModelObject::sort_volumes(bool full_sort) // sort volumes inside the object to order "Model Part, Negative Volume, Modifier, Support Blocker and Support Enforcer. " if (full_sort) std::stable_sort(volumes.begin(), volumes.end(), [](ModelVolume* vl, ModelVolume* vr) { + // Special handling for Precise Seam modifiers: group-based sorting with user order preservation + if (vl->is_precise_seam() && vr->is_precise_seam()) { + // Strong (center/left/right) always before weak (enforced/blocked/neutral) + bool vl_strong = vl->is_precise_seam_strong(); + bool vr_strong = vr->is_precise_seam_strong(); + if (vl_strong != vr_strong) + return vl_strong; // strong < weak → strong group appears first + + // Within same group (both strong or both weak): preserve current order + // stable_sort will maintain relative positions when comparator returns false + return false; + } + + // For non-Precise-Seam or mixed types: use standard enum-based ordering return vl->type() < vr->type(); }); // sort have to controll "place" of the support blockers/enforcers. But one of the model parts have to be on the first place. @@ -1456,10 +1475,19 @@ void ModelObject::sort_volumes(bool full_sort) std::stable_sort(volumes.begin(), volumes.end(), [](ModelVolume* vl, ModelVolume* vr) { ModelVolumeType vl_type = vl->type() > ModelVolumeType::PARAMETER_MODIFIER ? vl->type() : ModelVolumeType::PARAMETER_MODIFIER; ModelVolumeType vr_type = vr->type() > ModelVolumeType::PARAMETER_MODIFIER ? vr->type() : ModelVolumeType::PARAMETER_MODIFIER; + + // Apply same Precise Seam grouping logic for partial sort + if (vl->is_precise_seam() && vr->is_precise_seam()) { + bool vl_strong = vl->is_precise_seam_strong(); + bool vr_strong = vr->is_precise_seam_strong(); + if (vl_strong != vr_strong) + return vl_strong; + return false; // preserve order within same group + } + return vl_type < vr_type; }); } - ModelInstance* ModelObject::add_instance() { ModelInstance* i = new ModelInstance(this); @@ -2620,7 +2648,8 @@ std::vector ModelVolume::get_extruders() const if (m_type == ModelVolumeType::INVALID || m_type == ModelVolumeType::NEGATIVE_VOLUME || m_type == ModelVolumeType::SUPPORT_BLOCKER - || m_type == ModelVolumeType::SUPPORT_ENFORCER) + || m_type == ModelVolumeType::SUPPORT_ENFORCER + || this->is_precise_seam()) // Precise Seam is non-printing helper geometry return std::vector(); if (mmu_segmentation_facets.timestamp() != mmuseg_ts) { @@ -2824,6 +2853,19 @@ ModelVolumeType ModelVolume::type_from_string(const std::string &s) return ModelVolumeType::SUPPORT_ENFORCER; if (s == "support_blocker") return ModelVolumeType::SUPPORT_BLOCKER; + // Precise Seam types + if (s == "precise_seam_center") + return ModelVolumeType::PRECISE_SEAM_CENTER; + if (s == "precise_seam_left") + return ModelVolumeType::PRECISE_SEAM_LEFT; + if (s == "precise_seam_right") + return ModelVolumeType::PRECISE_SEAM_RIGHT; + if (s == "precise_seam_enforced") + return ModelVolumeType::PRECISE_SEAM_ENFORCED; + if (s == "precise_seam_blocked") + return ModelVolumeType::PRECISE_SEAM_BLOCKED; + if (s == "precise_seam_neutral") + return ModelVolumeType::PRECISE_SEAM_NEUTRAL; //assert(s == "0"); // Default value if invalud type string received. return ModelVolumeType::MODEL_PART; @@ -2838,6 +2880,12 @@ std::string ModelVolume::type_to_string(const ModelVolumeType t) case ModelVolumeType::PARAMETER_MODIFIER: return "modifier_part"; case ModelVolumeType::SUPPORT_ENFORCER: return "support_enforcer"; case ModelVolumeType::SUPPORT_BLOCKER: return "support_blocker"; + case ModelVolumeType::PRECISE_SEAM_CENTER: return "precise_seam_center"; + case ModelVolumeType::PRECISE_SEAM_LEFT: return "precise_seam_left"; + case ModelVolumeType::PRECISE_SEAM_RIGHT: return "precise_seam_right"; + case ModelVolumeType::PRECISE_SEAM_ENFORCED: return "precise_seam_enforced"; + case ModelVolumeType::PRECISE_SEAM_BLOCKED: return "precise_seam_blocked"; + case ModelVolumeType::PRECISE_SEAM_NEUTRAL: return "precise_seam_neutral"; default: assert(false); return "normal_part"; @@ -3712,7 +3760,11 @@ void FacetsAnnotation::set_triangle_from_string(int triangle_id, const std::stri m_data.bitstream.insert(m_data.bitstream.end(), bool(dec & (1 << i))); } - m_data.update_used_states(bitstream_start_idx); + if (!m_data.update_used_states(bitstream_start_idx)) { + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": dropping malformed paint data of triangle " << triangle_id; + m_data.bitstream.resize(bitstream_start_idx); + m_data.triangles_to_split.pop_back(); + } } bool FacetsAnnotation::equals(const FacetsAnnotation &other) const @@ -3795,6 +3847,7 @@ bool model_volume_list_changed(const ModelObject &model_object_old, const ModelO }); } + template< typename TypeFilterFn, typename CompareFn> bool model_property_changed(const ModelObject &model_object_old, const ModelObject &model_object_new, TypeFilterFn type_filter, CompareFn compare) { diff --git a/src/libslic3r/Model.hpp b/src/libslic3r/Model.hpp index 60f2b617c2..895ea30d09 100644 --- a/src/libslic3r/Model.hpp +++ b/src/libslic3r/Model.hpp @@ -349,8 +349,22 @@ enum class ModelVolumeType : int { PARAMETER_MODIFIER, SUPPORT_BLOCKER, SUPPORT_ENFORCER, + // Precise seam modifiers (6 subtypes for seam placement control). + // Order is critical: strong types first, then weak. Range checks in is_precise_seam*() depend on it. + PRECISE_SEAM_CENTER, + PRECISE_SEAM_LEFT, + PRECISE_SEAM_RIGHT, + PRECISE_SEAM_ENFORCED, + PRECISE_SEAM_BLOCKED, + PRECISE_SEAM_NEUTRAL, }; +// Free functions for checking ModelVolumeType without a ModelVolume object. +// Keep in sync with ModelVolume::is_precise_seam*() methods below. +inline bool is_precise_seam(ModelVolumeType t) { return t >= ModelVolumeType::PRECISE_SEAM_CENTER && t <= ModelVolumeType::PRECISE_SEAM_NEUTRAL; } +inline bool is_precise_seam_strong(ModelVolumeType t) { return t >= ModelVolumeType::PRECISE_SEAM_CENTER && t <= ModelVolumeType::PRECISE_SEAM_RIGHT; } +inline bool is_precise_seam_weak(ModelVolumeType t) { return t >= ModelVolumeType::PRECISE_SEAM_ENFORCED && t <= ModelVolumeType::PRECISE_SEAM_NEUTRAL; } + // A printable object, possibly having multiple print volumes (each with its own set of parameters and materials), // and possibly having multiple modifier volumes, each modifier volume with its set of parameters and materials. // Each ModelObject may be instantiated mutliple times, each instance having different placement on the print bed, @@ -982,6 +996,14 @@ public: bool is_support_enforcer() const { return m_type == ModelVolumeType::SUPPORT_ENFORCER; } bool is_support_blocker() const { return m_type == ModelVolumeType::SUPPORT_BLOCKER; } bool is_support_modifier() const { return m_type == ModelVolumeType::SUPPORT_BLOCKER || m_type == ModelVolumeType::SUPPORT_ENFORCER; } + // Check if this volume is any of the precise seam modifier subtypes + bool is_precise_seam() const { return m_type >= ModelVolumeType::PRECISE_SEAM_CENTER && m_type <= ModelVolumeType::PRECISE_SEAM_NEUTRAL; } + // Helper to check if volume is a "strong" Precise Seam type (center, left, right) + // Strong modifiers have priority and always appear above weak modifiers in UI + bool is_precise_seam_strong() const { return m_type >= ModelVolumeType::PRECISE_SEAM_CENTER && m_type <= ModelVolumeType::PRECISE_SEAM_RIGHT; } + // Helper to check if volume is a "weak" Precise Seam type (enforced, blocked, neutral) + // Weak modifiers always appear below strong modifiers in UI + bool is_precise_seam_weak() const { return m_type >= ModelVolumeType::PRECISE_SEAM_ENFORCED && m_type <= ModelVolumeType::PRECISE_SEAM_NEUTRAL; } bool is_text() const { return text_configuration.has_value(); } bool is_svg() const { return emboss_shape.has_value() && !text_configuration.has_value(); } bool is_the_only_one_part() const; // behave like an object @@ -1111,7 +1133,7 @@ protected: friend class SLAPrint; friend class Model; friend class ModelObject; - friend void model_volume_list_update_supports(ModelObject& model_object_dst, const ModelObject& model_object_new); + friend void model_volume_list_update_supports_and_seams(ModelObject& model_object_dst, const ModelObject& model_object_new); // Copies IDs of both the ModelVolume and its config. explicit ModelVolume(const ModelVolume &rhs) = default; diff --git a/src/libslic3r/PerimeterGenerator.cpp b/src/libslic3r/PerimeterGenerator.cpp index 87059ebf2b..4fec834171 100644 --- a/src/libslic3r/PerimeterGenerator.cpp +++ b/src/libslic3r/PerimeterGenerator.cpp @@ -2258,13 +2258,45 @@ void PerimeterGenerator::process_no_bridge(Surfaces& all_surfaces, coord_t perim // ORCA: // Inner Outer Inner wall ordering mode perimeter order optimisation functions + +// Whether two Arachne lines touch: somewhere the gap between their centrelines is no more than the +// touching distance there. Each junction of one line is measured against the segments of the other, +// both ways, and the search stops at the first spot that touches. +// Arachne varies line width to fill the region (e.g. the odd centre line of a narrow wall is wider +// than nominal), so the touching distance is half the combined width at the closest points, not the +// nominal spacing. Widths are taken locally so a line widened in one place (a wedge tip, a wall +// transition) does not count as touching where it passes close to other perimeters. min_threshold keeps +// the nominal spacing threshold as the lower bound. +static bool arachne_lines_touch(const Arachne::ExtrusionLine &a, const Arachne::ExtrusionLine &b, double min_threshold) +{ + auto one_way = [min_threshold](const Arachne::ExtrusionLine &from, const Arachne::ExtrusionLine &to) { + for (const Arachne::ExtrusionJunction &j : from.junctions) { + const Vec2d p = j.p.cast(); + for (size_t k = 0; k + 1 < to.junctions.size(); ++k) { + const Arachne::ExtrusionJunction &j0 = to.junctions[k]; + const Arachne::ExtrusionJunction &j1 = to.junctions[k + 1]; + const Vec2d s0 = j0.p.cast(); + const Vec2d seg = j1.p.cast() - s0; + const double l2 = seg.squaredNorm(); + const double t = l2 > 0. ? std::clamp((p - s0).dot(seg) / l2, 0., 1.) : 0.; + const double w = double(j0.w) + t * double(j1.w - j0.w); // width of `to` at the closest point + const double touch_distance = std::max(min_threshold, 0.5 * (double(j.w) + w)); + if ((s0 + t * seg - p).norm() <= touch_distance) + return true; + } + } + return false; + }; + return one_way(a, b) || one_way(b, a); +} + /** * @brief Finds all perimeters touching a given set of reference lines, given as indexes. * * @param entities The list of PerimeterGeneratorArachneExtrusion entities. * @param referenceIndices A set of indices representing the reference points. - * @param threshold_external The distance threshold to consider for proximity for a reference perimeter with inset index 0 - * @param threshold_internal The distance threshold to consider for proximity for a reference perimeter with inset index 1+ + * @param threshold_external The minimum touching distance for a reference perimeter with inset index 0 + * @param threshold_internal The minimum touching distance for a reference perimeter with inset index 1+ * @param considered_inset_idx What perimeter inset index are we searching for (eg. if we are searching for first internal perimeters proximate to the current reference perimeter, this value should be set to 1 etc). * @return std::vector A vector of indices representing the touching perimeters. */ @@ -2273,7 +2305,6 @@ std::vector findAllTouchingPerimeters(const std::vector 0) continue; @@ -2284,15 +2315,9 @@ std::vector findAllTouchingPerimeters(const std::vectorinset_idx == 0) - threshold = threshold_external; - else - threshold = threshold_internal; - if (distance <= threshold) { + // Add to touchingIndices if the lines touch. + const double threshold = double(referenceEntity.extrusion->inset_idx == 0 ? threshold_external : threshold_internal); + if (arachne_lines_touch(*referenceEntity.extrusion, *entity.extrusion, threshold)) { touchingIndices.insert(i); } } diff --git a/src/libslic3r/PerimeterGenerator.hpp b/src/libslic3r/PerimeterGenerator.hpp index 4b8f84ca5f..cd49b4acdd 100644 --- a/src/libslic3r/PerimeterGenerator.hpp +++ b/src/libslic3r/PerimeterGenerator.hpp @@ -2,6 +2,7 @@ #define slic3r_PerimeterGenerator_hpp_ #include "libslic3r.h" +#include #include #include "Layer.hpp" #include "Flow.hpp" @@ -105,6 +106,8 @@ public: bool has_fuzzy_hole = false; // Preserve construction order so overlap precedence remains deterministic. std::vector> regions_by_fuzzify; + // Area resting on the layer below, where fuzzy skin is allowed. Unset means no restriction. + std::optional fuzzy_supported_area; PerimeterGenerator( // Input: diff --git a/src/libslic3r/PlaceholderParser.cpp b/src/libslic3r/PlaceholderParser.cpp index 3e29e0c172..1d7abcd5de 100644 --- a/src/libslic3r/PlaceholderParser.cpp +++ b/src/libslic3r/PlaceholderParser.cpp @@ -851,6 +851,8 @@ namespace client // If true, the macro processor will evaluate just a boolean condition using the full expressive power of the macro processor. bool just_boolean_expression = false; std::string error_message; + // Local variables declared in {if} branches that were not taken, see PlaceholderParser::check_inactive_branches. + mutable std::set inactive_local_variables; // Table to translate symbol tag to a human readable error message. static std::map tag_to_error_message; @@ -892,6 +894,8 @@ namespace client } // Inside a block, which is conditionally suppressed? bool skipping() const { return m_depth_suppressed > 0; } + // Are variable names resolved inside the suppressed blocks too? + bool check_inactive_names() const { return PlaceholderParser::check_inactive_branches && ! just_boolean_expression; } const ConfigOption* optptr(const t_config_option_key &opt_key) const override { @@ -927,7 +931,7 @@ namespace client static void legacy_variable_expansion(const MyContext *ctx, IteratorRange &opt_key, std::string &output) { - if (ctx->skipping()) + if (ctx->skipping() && ! ctx->check_inactive_names()) return; std::string opt_key_str(opt_key.begin(), opt_key.end()); @@ -949,7 +953,9 @@ namespace client } } if (opt == nullptr) - ctx->throw_exception("Variable does not exist", opt_key); + ctx->throw_exception(ctx->skipping() ? "Variable does not exist (in an inactive branch)" : "Variable does not exist", opt_key); + if (ctx->skipping()) + return; if (opt->is_scalar()) { if (opt->is_nil()) ctx->throw_exception("Trying to reference an undefined (nil) optional variable", opt_key); @@ -972,9 +978,10 @@ namespace client IteratorRange &opt_vector_index, std::string &output) { - if (ctx->skipping()) + if (ctx->skipping() && ! ctx->check_inactive_names()) return; + const char *not_found = ctx->skipping() ? "Variable does not exist (in an inactive branch)" : "Variable does not exist"; std::string opt_key_str(opt_key.begin(), opt_key.end()); const ConfigOption *opt = ctx->resolve_symbol(opt_key_str); if (opt == nullptr) { @@ -984,18 +991,20 @@ namespace client opt = ctx->resolve_symbol(opt_key_str); } if (opt == nullptr) - ctx->throw_exception("Variable does not exist", opt_key); + ctx->throw_exception(not_found, opt_key); } if (! opt->is_vector()) ctx->throw_exception("Trying to index a scalar variable", opt_key); + const ConfigOption *opt_index = ctx->resolve_symbol(std::string(opt_vector_index.begin(), opt_vector_index.end())); + if (opt_index == nullptr) + ctx->throw_exception(not_found, opt_key); + if (opt_index->type() != coInt) + ctx->throw_exception("Indexing variable has to be integer", opt_key); + if (ctx->skipping()) + return; const ConfigOptionVectorBase *vec = static_cast(opt); if (vec->empty()) ctx->throw_exception("Indexing an empty vector variable", opt_key); - const ConfigOption *opt_index = ctx->resolve_symbol(std::string(opt_vector_index.begin(), opt_vector_index.end())); - if (opt_index == nullptr) - ctx->throw_exception("Variable does not exist", opt_key); - if (opt_index->type() != coInt) - ctx->throw_exception("Indexing variable has to be integer", opt_key); int idx = opt_index->getInt(); if (idx < 0) ctx->throw_exception("Negative vector index", opt_key); @@ -1021,6 +1030,13 @@ namespace client output.writable = true; } output.opt = opt; + } else if (ctx->check_inactive_names()) { + // Only check the name. Back tracking may resolve the same identifier twice, so there are no side effects. + const std::string key{ opt_key.begin(), opt_key.end() }; + if (ctx->resolve_symbol(key) == nullptr && ctx->resolve_output_symbol(key) == nullptr && + ctx->inactive_local_variables.count(key) == 0 && + (ctx->context_data == nullptr || ctx->context_data->inactive_global_variables.count(key) == 0)) + ctx->throw_exception("Not a variable name (in an inactive branch)", opt_key); } output.it_range = opt_key; } @@ -1426,6 +1442,13 @@ namespace client out.opt = ctx->config_local.optptr(key); } out.name = std::move(key); + } else if (ctx->check_inactive_names()) { + // Declared in a branch that is not taken: the name still counts as defined for the names that follow. + std::string key(it_range.begin(), it_range.end()); + if (global_variable && ctx->context_data != nullptr) + ctx->context_data->inactive_global_variables.insert(std::move(key)); + else + ctx->inactive_local_variables.insert(std::move(key)); } out.it_range = it_range; } @@ -1660,8 +1683,8 @@ namespace client const OptWithPos &rhs) { if (ctx->skipping()) - // Skipping, continue parsing. - return true; + // Skipping, let conditional_expression parse the whole right hand side, which may continue after the variable reference. + return false; if (lhs.opt) { assert(lhs.opt->is_vector()); diff --git a/src/libslic3r/PlaceholderParser.hpp b/src/libslic3r/PlaceholderParser.hpp index 3f3998dc5a..e32a4de9dc 100644 --- a/src/libslic3r/PlaceholderParser.hpp +++ b/src/libslic3r/PlaceholderParser.hpp @@ -4,6 +4,7 @@ #include "libslic3r.h" #include #include +#include #include #include #include @@ -24,8 +25,15 @@ public: // If defined, then this dictionary is used by the scripts to define user variables and persist them // between PlaceholderParser evaluations. std::unique_ptr global_config; + // Global variables declared in {if} branches that were not taken, see check_inactive_branches. + std::set inactive_global_variables; }; + // Orca: when set, variable names inside {if} branches that are not taken must resolve too, so a single + // expansion checks every branch of a template. Only the profile validator's slice sweep sets it. + // It does not apply to evaluate_boolean_expression(), where an error reads as "compatible". + static inline bool check_inactive_branches = false; + PlaceholderParser(const DynamicConfig *external_config = nullptr); void clear_config() { m_config.clear(); } diff --git a/src/libslic3r/Polygon.cpp b/src/libslic3r/Polygon.cpp index 32b4d062f1..77ff30fb40 100644 --- a/src/libslic3r/Polygon.cpp +++ b/src/libslic3r/Polygon.cpp @@ -318,10 +318,13 @@ Points Polygon::concave_points(double angle_threshold) const } // Projection of a point onto the polygon. -Point Polygon::point_projection(const Point &point) const +Point Polygon::point_projection(const Point &point, size_t *edge_index) const { Point proj = point; double dmin = std::numeric_limits::max(); + // Preserve the existing projection and tie order while optionally tracking its edge. + if (edge_index) + *edge_index = std::numeric_limits::max(); if (! this->points.empty()) { for (size_t i = 0; i < this->points.size(); ++ i) { const Point &pt0 = this->points[i]; @@ -330,11 +333,15 @@ Point Polygon::point_projection(const Point &point) const if (d < dmin) { dmin = d; proj = pt0; + if (edge_index) + *edge_index = i; } d = (point - pt1).cast().norm(); if (d < dmin) { dmin = d; proj = pt1; + if (edge_index) + *edge_index = (i + 1) % this->points.size(); } Vec2d v1(coordf_t(pt1(0) - pt0(0)), coordf_t(pt1(1) - pt0(1))); coordf_t div = v1.squaredNorm(); @@ -347,6 +354,8 @@ Point Polygon::point_projection(const Point &point) const if (d < dmin) { dmin = d; proj = foot; + if (edge_index) + *edge_index = i; } } } diff --git a/src/libslic3r/Polygon.hpp b/src/libslic3r/Polygon.hpp index d542d2d74a..7e0d88a720 100644 --- a/src/libslic3r/Polygon.hpp +++ b/src/libslic3r/Polygon.hpp @@ -85,7 +85,9 @@ public: Points convex_points(double angle_threshold = 0.) const; Points concave_points(double angle_threshold = 0.) const; // Projection of a point onto the polygon. - Point point_projection(const Point &point) const; + // Optional index: start of the closest edge, or the vertex itself for an endpoint. + // Empty polygons return the query point and std::numeric_limits::max() as the index. + Point point_projection(const Point &point, size_t *edge_index = nullptr) const; std::vector parameter_by_length() const; //BBS diff --git a/src/libslic3r/Preset.cpp b/src/libslic3r/Preset.cpp index 1002f5be89..9af8969490 100644 --- a/src/libslic3r/Preset.cpp +++ b/src/libslic3r/Preset.cpp @@ -47,6 +47,7 @@ #include #include "libslic3r.h" +#include "LifecycleEvents.hpp" #include "Utils.hpp" #include "Time.hpp" #include "PlaceholderParser.hpp" @@ -1198,6 +1199,7 @@ static std::vector s_Preset_print_options{ "enable_tower_interface_features", "enable_tower_interface_cooldown_during_tower", "wipe_tower_no_sparse_layers", + "wipe_tower_sparse_layers_combination", "compatible_printers", "compatible_printers_condition", "inherits", @@ -2972,6 +2974,7 @@ void PresetCollection::save_current_preset(const std::string &new_name, bool det // 1) Find the preset with a new_name or create a new one, // initialize it with the edited config. auto it = this->find_preset_internal(new_name); + const bool preset_existed = (it != m_presets.end() && it->name == new_name); if (it != m_presets.end() && it->name == new_name) { // Preset with the same name found. Preset &preset = *it; @@ -3079,6 +3082,14 @@ void PresetCollection::save_current_preset(const std::string &new_name, bool det this->get_selected_preset().save(&(parent_preset->config)); else this->get_selected_preset().save(nullptr); + + { + LifecycleEventContext ctx; + ctx.name = new_name; + ctx.msg = preset_existed ? "overwrite" : "new"; + ctx.code = LifecycleEvtCode::Ok; + fire_lifecycle_event(LifecycleEvent::PresetSaved, ctx); + } } // A detached standalone preset for the Full Publish receiver: create a user preset holding diff --git a/src/libslic3r/Preset.hpp b/src/libslic3r/Preset.hpp index c66518e29d..5b32d90ac6 100644 --- a/src/libslic3r/Preset.hpp +++ b/src/libslic3r/Preset.hpp @@ -62,6 +62,7 @@ #define ORCA_JSON_KEY_UPDATE_TIME "updated_time" #define ORCA_JSON_KEY_CREATED_TIME "created_time" #define BBL_JSON_KEY_INHERITS "inherits" +#define BBL_JSON_KEY_INCLUDES "include" #define BBL_JSON_KEY_INSTANTIATION "instantiation" #define BBL_JSON_KEY_NOZZLE_DIAMETER "nozzle_diameter" #define BBL_JSON_KEY_PRINTER_TECH "machine_tech" diff --git a/src/libslic3r/PresetBundle.cpp b/src/libslic3r/PresetBundle.cpp index dc731b63c4..b2cc67f970 100644 --- a/src/libslic3r/PresetBundle.cpp +++ b/src/libslic3r/PresetBundle.cpp @@ -199,7 +199,8 @@ DynamicPrintConfig PresetBundle::construct_full_config( if (num_filaments <= 1) { // BBS: update filament config related with variants DynamicPrintConfig filament_config = in_filament_presets[0].config; - if (apply_extruder && ((extruder_count > 1) || different_extruder)) + // Orca: a multi-variant filament resolves its variants on a single-variant printer too. + if (apply_extruder && ((extruder_count > 1) || different_extruder || filament_config.has_multi_variant_filament())) filament_config.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[0], (NozzleVolumeType)filament_volume_maps[0]); out.apply(filament_config); compatible_printers_condition.emplace_back(in_filament_presets[0].compatible_printers_condition()); @@ -223,7 +224,8 @@ DynamicPrintConfig PresetBundle::construct_full_config( filament_temp_configs.resize(num_filaments); for (size_t i = 0; i < num_filaments; ++i) { filament_temp_configs[i] = *(filament_configs[i]); - if (apply_extruder && ((extruder_count > 1) || different_extruder)) + // Orca: a multi-variant filament resolves its variants on a single-variant printer too. + if (apply_extruder && ((extruder_count > 1) || different_extruder || filament_temp_configs[i].has_multi_variant_filament())) filament_temp_configs[i].update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[i], (NozzleVolumeType)filament_volume_maps[i]); } @@ -4664,7 +4666,8 @@ DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optio if (num_filaments <= 1) { //BBS: update filament config related with variants DynamicPrintConfig filament_config = this->filaments.get_edited_preset().config; - if (apply_extruder && ((extruder_count > 1) || different_extruder)) + // Orca: a multi-variant filament resolves its variants on a single-variant printer too. + if (apply_extruder && ((extruder_count > 1) || different_extruder || filament_config.has_multi_variant_filament())) filament_config.update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[0], (NozzleVolumeType)filament_volume_maps[0]); out.apply(filament_config); compatible_printers_condition.emplace_back(this->filaments.get_edited_preset().compatible_printers_condition()); @@ -4758,7 +4761,8 @@ DynamicPrintConfig PresetBundle::full_fff_config(bool apply_extruder, std::optio filament_temp_configs.resize(num_filaments); for (size_t i = 0; i < num_filaments; ++i) { filament_temp_configs[i] = *(filament_configs[i]); - if (apply_extruder && ((extruder_count > 1) || different_extruder)) + // Orca: a multi-variant filament resolves its variants on a single-variant printer too. + if (apply_extruder && ((extruder_count > 1) || different_extruder || filament_temp_configs[i].has_multi_variant_filament())) filament_temp_configs[i].update_values_to_printer_extruders(out, extruder_count, extruder_volume_type_count, nozzle_volume_types, filament_options_with_variant, "", "filament_extruder_variant", 1, filament_maps[i], (NozzleVolumeType)filament_volume_maps[i]); } @@ -6598,7 +6602,8 @@ void PresetBundle::load_config_file_config(const std::string &name_or_path, bool // now, or deserialized from the vendor's cache; the code is shared so a // cache-loaded bundle cannot come out different from a JSON-loaded one. // Resolves `inherits` against the presets loaded before this one -// (config_maps) or against base_bundle's filament library, flattens, validates +// (config_maps) or against base_bundle's filament library, layers each +// `include` (include_maps) under the preset's own keys, flattens, validates // and registers the preset. Returns the reason loading failed, empty on // success. std::string PresetBundle::load_vendor_preset( @@ -6607,9 +6612,10 @@ std::string PresetBundle::load_vendor_preset( const PresetBundle* base_bundle, LoadConfigBundleAttributes flags, ConfigSubstitutionContext& substitution_context, PresetsConfigSubstitutions& substitutions, - std::map& config_maps, std::map& filament_id_maps, + std::map& config_maps, std::map& include_maps, + std::map& filament_id_maps, PresetCollection* presets_collection, size_t& count, bool is_from_lib, - const std::set* retain_configs) + const std::set* retain_configs, const std::set* retain_includes) { const VendorProfile* current_vendor_profile = &this->vendors.at(vendor_name); const std::string subfile = path + "/" + vendor_name + "/" + entry.sub_path; @@ -6652,14 +6658,30 @@ std::string PresetBundle::load_vendor_preset( return reason; } } - else { - if (presets_collection->type() == Preset::TYPE_PRINTER) - default_config = &presets_collection->default_preset_for(entry.config_src).config; - else - default_config = &presets_collection->default_preset().config; - } + else + default_config = &presets_collection->default_preset_for(entry.config_src).config; config = *default_config; + // Layer each included preset's own keys over the parent, in the order listed; + // this preset's own keys go on top. + for (const std::string& name : entry.includes) { + auto it = include_maps.find(name); + if (it == include_maps.end()) { + ++m_errors; + BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": can not find include " << name << " for " << preset_name; + continue; + } + config.apply(it->second); + } config.apply(entry.config_src); + // Record what a base states, its diff against the default, for the presets + // that include it. It is taken before extend_default_config_length pads every + // per-variant key to the base's variant count: the padded defaults would + // otherwise override the values each includer inherits. + if (entry.instantiation == "false" && (retain_includes == nullptr || retain_includes->count(preset_name) != 0)) { + DynamicPrintConfig included; + included.apply_only(config, config.diff(presets_collection->default_preset_for(config).config)); + include_maps.emplace(preset_name, std::move(included)); + } extend_default_config_length(config, true, *default_config); if (entry.instantiation == "false" && "Template" != vendor_name) { // Report configuration fields, which are misplaced into a wrong group. @@ -7118,6 +7140,15 @@ std::pair PresetBundle::load_vendor_configs_ } entry.name = key_values[BBL_JSON_KEY_NAME]; entry.description = key_values[BBL_JSON_KEY_DESCRIPTION]; + // A file that states no instantiation and is named as G-code, or has no + // name, is a template that is only there to be included. A nameless one + // goes by its name in the vendor index. + if (auto it = key_values.find(BBL_JSON_KEY_INSTANTIATION); + (it == key_values.end() || it->second.empty()) && (entry.name.empty() || entry.name.find("gcode") != std::string::npos)) { + key_values[BBL_JSON_KEY_INSTANTIATION] = "false"; + if (entry.name.empty()) + entry.name = subfile_iter.first; + } if(key_values.find(BBL_JSON_KEY_INSTANTIATION) == key_values.end()) { BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": Missing instantiation attribute for " << entry.name; @@ -7146,6 +7177,20 @@ std::pair PresetBundle::load_vendor_configs_ return reason; } } + if (auto it = key_values.find(BBL_JSON_KEY_INCLUDES); it != key_values.end()) { + // An array of names, or one bare name; load_from_json kept the JSON text. + nlohmann::json includes = nlohmann::json::parse(it->second); + if (!includes.is_array()) + includes = nlohmann::json::array({std::move(includes)}); + for (const auto& name : includes) { + if (name.is_string()) + entry.includes.push_back(name.get()); + else { + ++m_errors; + BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << ": invalid include " << name.dump() << " for " << entry.name; + } + } + } if (key_values.find(ORCA_JSON_KEY_RENAMED_FROM) != key_values.end()) { if (!unescape_strings_cstyle(key_values[ORCA_JSON_KEY_RENAMED_FROM], entry.renamed_from)) { BOOST_LOG_TRIVIAL(error) << "Error in a Config \"" << dir << "\": The preset \"" << entry.name @@ -7162,7 +7207,7 @@ std::pair PresetBundle::load_vendor_configs_ return reason; }; - std::map configs; + std::map configs, include_maps; std::map filament_id_maps; // Orca: whether to (re)write the vendor's cache after this parse, leaving it // in step with the profile so the next run reads it instead. It is written @@ -7179,6 +7224,7 @@ std::pair PresetBundle::load_vendor_configs_ auto load_subfiles = [&](std::vector>& subfiles, std::vector& entries, const char* kind, bool is_from_lib = false) { configs.clear(); + include_maps.clear(); filament_id_maps.clear(); for (auto& subfile : subfiles) { CachedPreset entry; @@ -7186,8 +7232,8 @@ std::pair PresetBundle::load_vendor_configs_ if (reason.empty()) { const int errors_before_install = m_errors; reason = load_vendor_preset(entry, dir, vendor_name, base_bundle, flags, - substitution_context, substitutions, configs, filament_id_maps, presets, - presets_loaded, is_from_lib); + substitution_context, substitutions, configs, include_maps, filament_id_maps, + presets, presets_loaded, is_from_lib); install_errors += m_errors - errors_before_install; } if (!reason.empty()) { @@ -7982,26 +8028,29 @@ bool PresetBundle::load_vendor_cache(const std::string& cache_path, const std::s // parsed), so no substitutions are reported, as before. ConfigSubstitutionContext substitution_context { ForwardCompatibilitySubstitutionRule::EnableSilent }; PresetsConfigSubstitutions substitutions; - std::map configs; + std::map configs, include_maps; std::map filament_id_maps; const std::string path = boost::filesystem::path(cache_path).parent_path().string(); size_t count = 0; auto install_entries = [&](const std::vector& entries, PresetCollection* presets, bool is_from_lib) { configs.clear(); + include_maps.clear(); filament_id_maps.clear(); - // Only configs of presets that other entries inherit are ever looked - // up again; registering just those skips one full config copy for - // every leaf preset. The library's filaments are all retained — they - // become the m_config_maps other vendors resolve against. - std::set inherited; - for (const CachedPreset& entry : entries) + // Only configs of presets that other entries inherit or include are + // ever looked up again; registering just those skips one full config + // copy for every leaf preset. The library's filaments are all retained + // — they become the m_config_maps other vendors resolve against. + std::set inherited, included; + for (const CachedPreset& entry : entries) { if (! entry.inherits.empty()) inherited.insert(entry.inherits); + included.insert(entry.includes.begin(), entry.includes.end()); + } const std::set* retain_configs = is_from_lib ? nullptr : &inherited; for (const CachedPreset& entry : entries) { const std::string reason = load_vendor_preset(entry, path, vendor_name, base_bundle, LoadConfigBundleAttribute::LoadSystem, substitution_context, substitutions, - configs, filament_id_maps, presets, count, is_from_lib, retain_configs); + configs, include_maps, filament_id_maps, presets, count, is_from_lib, retain_configs, &included); if (! reason.empty()) throw std::runtime_error("entry " + entry.name + " failed to install: " + reason); } diff --git a/src/libslic3r/PresetBundle.hpp b/src/libslic3r/PresetBundle.hpp index 5a8f34e706..741f6069a4 100644 --- a/src/libslic3r/PresetBundle.hpp +++ b/src/libslic3r/PresetBundle.hpp @@ -634,22 +634,24 @@ private: // load_vendor_configs_from_json reads a cache. bool load_vendor_cache(const boost::filesystem::path& dir, const std::string& vendor_name, const PresetBundle* base_bundle); - // Load one source-form preset entry into this bundle: resolve `inherits`, - // flatten, validate and register the preset. Returns the reason loading - // failed, empty on success. See the definition for the sharing contract - // between the JSON parse and the cache load. - // retain_configs, when non-null, names the only presets registered into - // config_maps (a full config copy each). The cache load passes the names its - // entries inherit — the only ones ever looked up again; the JSON parse - // retains all, not knowing what later subfiles inherit. + // Load one source-form preset entry into this bundle: resolve `inherits` + // and `include`, flatten, validate and register the preset. Returns the + // reason loading failed, empty on success. See the definition for the + // sharing contract between the JSON parse and the cache load. + // retain_configs / retain_includes, when non-null, name the only presets + // registered into config_maps / include_maps (a config copy each). The + // cache load passes the names its entries inherit / include — the only + // ones ever looked up again; the JSON parse retains all, not knowing what + // later subfiles name. std::string load_vendor_preset(const CachedPreset& entry, const std::string& path, const std::string& vendor_name, const PresetBundle* base_bundle, LoadConfigBundleAttributes flags, ConfigSubstitutionContext& substitution_context, PresetsConfigSubstitutions& substitutions, - std::map& config_maps, std::map& filament_id_maps, + std::map& config_maps, std::map& include_maps, + std::map& filament_id_maps, PresetCollection* presets_collection, size_t& count, bool is_from_lib, - const std::set* retain_configs = nullptr); + const std::set* retain_configs = nullptr, const std::set* retain_includes = nullptr); // Clear every collection's m_printer_hold_alias, which reset() leaves alone. void clear_printer_hold_aliases(); diff --git a/src/libslic3r/PresetCacheFormat.cpp b/src/libslic3r/PresetCacheFormat.cpp index accebba7b4..1eca878fe2 100644 --- a/src/libslic3r/PresetCacheFormat.cpp +++ b/src/libslic3r/PresetCacheFormat.cpp @@ -254,7 +254,7 @@ constexpr uint32_t CACHE_MAGIC = 0x4F52435A; // "ORCZ" // save_entries below), or a change to the cache's own layout or the // meaning of its stamps. Option-schema drift is NOT such a change — the // dictionary handles it, which is why this no longer moves every release. -constexpr uint32_t CACHE_VERSION = 1; +constexpr uint32_t CACHE_VERSION = 2; // A stamp-string read that refuses an absurd length before allocating anything. // The stamps are read from files named from the outside (peek_version is @@ -325,7 +325,7 @@ void visit_entry(Archive& ar, Entry& e, ConfigFn&& config) { ar(e.name, e.sub_path); config(); - ar(e.inherits, e.description, e.instantiation, e.setting_id, e.filament_id, e.renamed_from); + ar(e.inherits, e.includes, e.description, e.instantiation, e.setting_id, e.filament_id, e.renamed_from); } // The count comes from a file that has already passed magic and CRC, but a diff --git a/src/libslic3r/PresetCacheFormat.hpp b/src/libslic3r/PresetCacheFormat.hpp index b200ec9911..2c90c07882 100644 --- a/src/libslic3r/PresetCacheFormat.hpp +++ b/src/libslic3r/PresetCacheFormat.hpp @@ -107,12 +107,13 @@ void load_config(cereal::BinaryInputArchive& ar, DynamicPrintConfig& config, con // comes after. void skip_config(cereal::BinaryInputArchive& ar, const CacheDictionary& dict); -// One preset as its JSON subfile states it: the config diff, the name of the -// preset it inherits, and the parse metadata — everything the parse phase of -// load_vendor_configs_from_json extracts and nothing it derives. Inheritance -// is resolved when the entry is installed, against whatever filament library -// is loaded then, so a cache carries no other vendor's values and no other -// vendor's update can make it stale. +// One preset as its JSON subfile states it: the config diff, the names of the +// preset it inherits and the presets it includes, and the parse metadata — +// everything the parse phase of load_vendor_configs_from_json extracts and +// nothing it derives. Inheritance and includes are resolved when the entry is +// installed, against whatever filament library is loaded then, so a cache +// carries no other vendor's values and no other vendor's update can make it +// stale. // Written and read by visit_entry in PresetCacheFormat.cpp, which lists every // field below in this order — once, for the save, the load and the name peek alike. struct CachedPreset @@ -121,6 +122,7 @@ struct CachedPreset std::string sub_path; // path under the vendor's directory DynamicPrintConfig config_src; // the preset's own diff, nothing inherited std::string inherits; + std::vector includes; // layered under config_src, in this order std::string description; std::string instantiation; // "true"/"false" as stated; anything else was already counted as a parse error std::string setting_id; diff --git a/src/libslic3r/Print.cpp b/src/libslic3r/Print.cpp index 833b811535..b708b759b2 100644 --- a/src/libslic3r/Print.cpp +++ b/src/libslic3r/Print.cpp @@ -14,6 +14,7 @@ #include "Flow.hpp" #include "Geometry/ConvexHull.hpp" #include "I18N.hpp" +#include "LifecycleEvents.hpp" #include "ShortestPath.hpp" #include "Thread.hpp" #include "Time.hpp" @@ -377,6 +378,7 @@ bool Print::invalidate_state_by_config_options(const ConfigOptionResolver & /* n || opt_key == "wipe_tower_bridging" || opt_key == "wipe_tower_extra_flow" || opt_key == "wipe_tower_no_sparse_layers" + || opt_key == "wipe_tower_sparse_layers_combination" || opt_key == "flush_volumes_matrix" || opt_key == "prime_volume" || opt_key == "flush_into_infill" @@ -1704,6 +1706,25 @@ StringObjectException Print::check_multi_filament_valid(const Print& print) // Precondition: Print::validate() requires the Print::apply() to be called its invocation. //BBS: refine seq-print validation logic +// The exception's own message is just "Errors"; the detail is in the per-object errors, +// whose object id is the PrintObject's. +std::string Print::slicing_errors_message(const SlicingErrors &errors) const +{ + std::string message; + for (const SlicingError &error : errors.errors_) { + std::string object_name; + for (const PrintObject *object : m_objects) + if (object->id().id == error.objectId()) { + object_name = object->model_object()->name; + break; + } + if (!message.empty()) + message += "\n"; + message += object_name.empty() ? std::string(error.what()) : object_name + ": " + error.what(); + } + return message; +} + StringObjectException Print::validate(std::vector *warnings, Polygons* collison_polygons, std::vector>* height_polygons) const { auto add_warning = [warnings](StringObjectException w) { @@ -2694,6 +2715,15 @@ void Print::process(long long *time_cost_with_cache, bool use_cache) if (m_objects.empty()) return; + { + LifecycleEventContext ctx; + ctx.id = std::to_string(m_model.id().id); + ctx.name = get_model_name(); + ctx.code = LifecycleEvtCode::Ok; + ctx.cancellation_check = [this]() { return canceled(); }; + fire_lifecycle_event(LifecycleEvent::SliceStarted, ctx); + } + for (PrintObject *obj : m_objects) obj->clear_shared_object(); @@ -3312,6 +3342,15 @@ void Print::process(long long *time_cost_with_cache, bool use_cache) } BOOST_LOG_TRIVIAL(info) << "Slicing process finished." << log_memory_info(); + + { + LifecycleEventContext ctx; + ctx.id = std::to_string(m_model.id().id); + ctx.name = get_model_name(); + ctx.code = LifecycleEvtCode::Ok; + ctx.cancellation_check = [this]() { return canceled(); }; + fire_lifecycle_event(LifecycleEvent::SliceGeometryFinished, ctx); + } } // G-code export process, running at a background thread. @@ -3899,6 +3938,9 @@ void Print::update_filament_maps_to_config(std::vector f_maps, std::vector< { int extruder_count = 1, extruder_volume_type_count = 1; bool support_multi = m_ori_full_print_config.support_different_extruders(extruder_count); + // Orca: resolve the filament variants wherever Print::apply does, a multi-variant filament + // on a single-variant printer included. + const bool expand_filaments = (extruder_count > 1) || support_multi || m_ori_full_print_config.has_multi_variant_filament(); std::vector> nozzle_volume_types; extruder_volume_type_count = m_ori_full_print_config.get_extruder_nozzle_volume_count(extruder_count, nozzle_volume_types); @@ -3939,7 +3981,7 @@ void Print::update_filament_maps_to_config(std::vector f_maps, std::vector< m_full_print_config = m_ori_full_print_config; std::set filament_keys = filament_options_with_variant; filament_keys.insert("filament_self_index"); - if ((extruder_count > 1) || support_multi) + if (expand_filaments) m_full_print_config.update_values_to_printer_extruders_for_multiple_filaments(m_full_print_config, extruder_count, extruder_volume_type_count, filament_keys, "filament_self_index", "filament_extruder_variant"); const std::vector &extruder_retract_keys = print_config_def.extruder_retract_keys(); @@ -3956,7 +3998,7 @@ void Print::update_filament_maps_to_config(std::vector f_maps, std::vector< compute_filament_override_value(opt_key, opt_old_machine, opt_new_machine, opt_new_filament, m_full_print_config, print_diff, filament_overrides, m_config.filament_map_2.values); } - if ((extruder_count > 1) || support_multi) { + if (expand_filaments) { t_config_option_keys keys(filament_options_with_variant.begin(), filament_options_with_variant.end()); keys.push_back("filament_self_index"); m_config.apply_only(m_full_print_config, keys, true); @@ -4911,6 +4953,16 @@ void Print::set_gcode_file_invalidated() //BBS: add gcode file preload logic void Print::export_gcode_from_previous_file(const std::string& file, GCodeProcessorResult* result, ThumbnailsGeneratorCallback thumbnail_cb) { + { + LifecycleEventContext ctx; + ctx.id = std::to_string(m_model.id().id); + ctx.name = get_model_name(); + ctx.code = LifecycleEvtCode::Ok; + ctx.msg = file; + ctx.cancellation_check = [this]() { return canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportStarted, ctx); + } + try { GCodeProcessor processor; GCodeProcessor::s_IsBBLPrinter = is_BBL_printer(); @@ -4930,13 +4982,32 @@ void Print::export_gcode_from_previous_file(const std::string& file, GCodeProces *result = std::move(processor.extract_result()); result->filament_change_sequence = filament_seq_loaded; result->nozzle_change_sequence = nozzle_seq_loaded; - } catch (std::exception & /* ex */) { + } catch (std::exception &ex) { BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(": found errors when process gcode file %1%") %file.c_str(); + { + LifecycleEventContext ctx; + ctx.id = std::to_string(m_model.id().id); + ctx.name = get_model_name(); + ctx.code = LifecycleEvtCode::Error; + ctx.msg = file + "\n" + ex.what(); + ctx.cancellation_check = [this]() { return canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportFinished, ctx); + } throw Slic3r::RuntimeError( std::string("Failed to process the G-code file ") + file + " from previous 3mf\n"); } BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": process the G-code file %1% successfully")%file.c_str(); + + { + LifecycleEventContext ctx; + ctx.id = std::to_string(m_model.id().id); + ctx.name = get_model_name(); + ctx.code = LifecycleEvtCode::Ok; + ctx.msg = file; + ctx.cancellation_check = [this]() { return canceled(); }; + fire_lifecycle_event(LifecycleEvent::GCodeExportFinished, ctx); + } } std::tuple Print::object_skirt_offset(double margin_height) const @@ -4981,6 +5052,7 @@ DynamicConfig PrintStatistics::config() const config.set_key_value("total_wipe_tower_filament", new ConfigOptionFloat(this->total_wipe_tower_filament)); config.set_key_value("initial_tool", new ConfigOptionInt(static_cast(this->initial_tool))); config.set_key_value("initial_extruder", new ConfigOptionInt(static_cast(this->initial_tool))); + config.set_key_value("initial_no_support_extruder", new ConfigOptionInt(static_cast(this->initial_no_support_tool))); return config; } @@ -4990,7 +5062,7 @@ DynamicConfig PrintStatistics::placeholders() for (const std::string key : { "print_time", "normal_print_time", "silent_print_time", "used_filament", "extruded_volume", "extruded_volume_total", "total_cost", "total_weight", "extruded_weight_total", - "initial_tool", "initial_extruder", "total_toolchanges", "total_wipe_tower_cost", "total_wipe_tower_filament"}) + "initial_tool", "initial_extruder", "initial_no_support_extruder", "total_toolchanges", "total_wipe_tower_cost", "total_wipe_tower_filament"}) config.set_key_value(key, new ConfigOptionString(std::string("{") + key + "}")); return config; } diff --git a/src/libslic3r/Print.hpp b/src/libslic3r/Print.hpp index 9c1782e047..dc4323e537 100644 --- a/src/libslic3r/Print.hpp +++ b/src/libslic3r/Print.hpp @@ -30,6 +30,8 @@ namespace Slic3r { +class SlicingErrors; + class GCode; class Layer; class ModelObject; @@ -468,6 +470,10 @@ public: std::vector slice_support_volumes(const ModelVolumeType model_volume_type) const; std::vector slice_support_blockers() const { return this->slice_support_volumes(ModelVolumeType::SUPPORT_BLOCKER); } std::vector slice_support_enforcers() const { return this->slice_support_volumes(ModelVolumeType::SUPPORT_ENFORCER); } + // Shared slicing path; multiple volumes are united per layer. + std::vector slice_modifier_volumes(const std::vector &volumes) const; + // Keep Precise Seam volumes separate so their individual priority is preserved. + std::vector slice_single_volume(const ModelVolume* volume) const { return this->slice_modifier_volumes({volume}); } // Helpers to project custom facets on slices void project_and_append_custom_facets(bool seam, EnforcerBlockerType type, std::vector& expolys, std::vector>* vertical_points=nullptr) const; @@ -828,6 +834,7 @@ struct PrintStatistics double total_wipe_tower_cost; double total_wipe_tower_filament; unsigned int initial_tool; + unsigned int initial_no_support_tool; std::map filament_stats; // Config with the filled in print statistics. @@ -846,6 +853,7 @@ struct PrintStatistics total_wipe_tower_cost = 0.; total_wipe_tower_filament = 0.; initial_tool = 0; + initial_no_support_tool = 0; filament_stats.clear(); } static const std::string FilamentUsedG; @@ -967,6 +975,8 @@ public: // Returns an empty string if valid, otherwise returns an error message. StringObjectException validate(std::vector *warnings = nullptr, Polygons* collison_polygons = nullptr, std::vector>* height_polygons = nullptr) const override; + // The per-object messages of a SlicingErrors, each prefixed with its object's name. + std::string slicing_errors_message(const SlicingErrors &errors) const; double skirt_first_layer_height() const; Flow brim_flow() const; Flow skirt_flow() const; diff --git a/src/libslic3r/PrintApply.cpp b/src/libslic3r/PrintApply.cpp index 90d60b5917..21e2251b65 100644 --- a/src/libslic3r/PrintApply.cpp +++ b/src/libslic3r/PrintApply.cpp @@ -8,12 +8,12 @@ namespace Slic3r { -// Add or remove support modifier ModelVolumes from model_object_dst to match the ModelVolumes of model_object_new +// Add or remove support and Precise Seam modifier ModelVolumes from model_object_dst to match the ModelVolumes of model_object_new // in the exact order and with the same IDs. -// It is expected, that the model_object_dst already contains the non-support volumes of model_object_new in the correct order. +// Other volume types must already match model_object_new in the correct order. // Friend to ModelVolume to allow copying. // static is not accepted by gcc if declared as a friend of ModelObject. -/* static */ void model_volume_list_update_supports(ModelObject &model_object_dst, const ModelObject &model_object_new) +/* static */ void model_volume_list_update_supports_and_seams(ModelObject &model_object_dst, const ModelObject &model_object_new) { typedef std::pair ModelVolumeWithStatus; std::vector old_volumes; @@ -33,18 +33,22 @@ namespace Slic3r { assert(! it->second); // not consumed yet it->second = true; ModelVolume *model_volume_dst = const_cast(it->first); - // For support modifiers, the type may have been switched from blocker to enforcer and vice versa. - assert((model_volume_dst->is_support_modifier() && model_volume_src->is_support_modifier()) || model_volume_dst->type() == model_volume_src->type()); + // Type may switch within support family, within precise_seam family, or between them. + assert((model_volume_dst->is_support_modifier() && model_volume_src->is_support_modifier()) || + (model_volume_dst->is_precise_seam() && model_volume_src->is_precise_seam()) || + (model_volume_dst->is_support_modifier() && model_volume_src->is_precise_seam()) || + (model_volume_dst->is_precise_seam() && model_volume_src->is_support_modifier()) || + model_volume_dst->type() == model_volume_src->type()); model_object_dst.volumes.emplace_back(model_volume_dst); - if (model_volume_dst->is_support_modifier()) { - // For support modifiers, the type may have been switched from blocker to enforcer and vice versa. + if (model_volume_dst->is_support_modifier() || model_volume_dst->is_precise_seam()) { + // Type may have been switched within or between support/precise_seam families. model_volume_dst->set_type(model_volume_src->type()); model_volume_dst->set_transformation(model_volume_src->get_transformation()); } assert(model_volume_dst->get_matrix().isApprox(model_volume_src->get_matrix())); } else { // The volume was not found in the old list. Create a new copy. - assert(model_volume_src->is_support_modifier()); + assert(model_volume_src->is_support_modifier() || model_volume_src->is_precise_seam()); model_object_dst.volumes.emplace_back(new ModelVolume(*model_volume_src)); model_object_dst.volumes.back()->set_model_object(&model_object_dst); } @@ -55,17 +59,20 @@ namespace Slic3r { delete mv_with_status.first; } -static inline void model_volume_list_copy_configs(ModelObject &model_object_dst, const ModelObject &model_object_src, const ModelVolumeType type) +// Copy configs of ModelVolumes matching type_filter predicate from src to dst. +// Mirrors the template pattern of model_volume_list_changed() in Model.cpp. +template +static inline void model_volume_list_copy_configs(ModelObject &model_object_dst, const ModelObject &model_object_src, TypeFilterFn type_filter) { size_t i_src, i_dst; for (i_src = 0, i_dst = 0; i_src < model_object_src.volumes.size() && i_dst < model_object_dst.volumes.size();) { const ModelVolume &mv_src = *model_object_src.volumes[i_src]; ModelVolume &mv_dst = *model_object_dst.volumes[i_dst]; - if (mv_src.type() != type) { + if (! type_filter(mv_src.type())) { ++ i_src; continue; } - if (mv_dst.type() != type) { + if (! type_filter(mv_dst.type())) { ++ i_dst; continue; } @@ -88,6 +95,20 @@ static inline void model_volume_list_copy_configs(ModelObject &model_object_dst, } } +// Convenience overload: single volume type. +static inline void model_volume_list_copy_configs(ModelObject &model_object_dst, const ModelObject &model_object_src, const ModelVolumeType type) +{ + model_volume_list_copy_configs(model_object_dst, model_object_src, [type](const ModelVolumeType t) { return t == type; }); +} + +// Convenience overload: multiple volume types at once (e.g. all precise seam types). +static inline void model_volume_list_copy_configs(ModelObject &model_object_dst, const ModelObject &model_object_src, const std::initializer_list &types) +{ + model_volume_list_copy_configs(model_object_dst, model_object_src, [&types](const ModelVolumeType t) { + return std::find(types.begin(), types.end(), t) != types.end(); + }); +} + static inline void layer_height_ranges_copy_configs(t_layer_config_ranges &lr_dst, const t_layer_config_ranges &lr_src) { assert(lr_dst.size() == lr_src.size()); @@ -1296,7 +1317,9 @@ Print::ApplyStatus Print::apply(const Model &model, DynamicPrintConfig new_full_ extruder_count, extruder_volume_type_count, filament_keys, "filament_self_index", "filament_extruder_variant", &dynamic_slot_indices); - else if ((extruder_count > 1) || different_extruder) + // Orca: also on a printer with a single extruder variant once a filament defines several + // (e.g. Standard and High Flow), so each filament takes its variant for that extruder. + else if ((extruder_count > 1) || different_extruder || new_full_config.has_multi_variant_filament()) new_full_config.update_values_to_printer_extruders_for_multiple_filaments(m_ori_full_print_config, extruder_count, extruder_volume_type_count, filament_keys, "filament_self_index", "filament_extruder_variant"); } @@ -1618,6 +1641,11 @@ Print::ApplyStatus Print::apply(const Model &model, DynamicPrintConfig new_full_ // 3) Synchronize ModelObjects & PrintObjects. const std::initializer_list solid_or_modifier_types { ModelVolumeType::MODEL_PART, ModelVolumeType::NEGATIVE_VOLUME, ModelVolumeType::PARAMETER_MODIFIER }; + const std::initializer_list precise_seam_types { + ModelVolumeType::PRECISE_SEAM_CENTER, ModelVolumeType::PRECISE_SEAM_LEFT, + ModelVolumeType::PRECISE_SEAM_RIGHT, ModelVolumeType::PRECISE_SEAM_ENFORCED, + ModelVolumeType::PRECISE_SEAM_BLOCKED, ModelVolumeType::PRECISE_SEAM_NEUTRAL + }; for (size_t idx_model_object = 0; idx_model_object < model.objects.size(); ++ idx_model_object) { ModelObject &model_object = *m_model.objects[idx_model_object]; ModelObjectStatus &model_object_status = const_cast(model_object_status_db.reuse(model_object)); @@ -1635,6 +1663,7 @@ Print::ApplyStatus Print::apply(const Model &model, DynamicPrintConfig new_full_ model_fuzzy_skin_data_changed(model_object, model_object_new); bool supports_differ = model_volume_list_changed(model_object, model_object_new, ModelVolumeType::SUPPORT_BLOCKER) || model_volume_list_changed(model_object, model_object_new, ModelVolumeType::SUPPORT_ENFORCER); + bool precise_seam_differ = model_volume_list_changed(model_object, model_object_new, precise_seam_types); bool layer_height_ranges_differ = ! layer_height_ranges_equal(model_object.layer_config_ranges, model_object_new.layer_config_ranges, model_object_new.layer_height_profile.empty()); bool model_origin_translation_differ = model_object.origin_translation != model_object_new.origin_translation; bool brim_points_differ = model_brim_points_data_changed(model_object, model_object_new); @@ -1677,13 +1706,20 @@ Print::ApplyStatus Print::apply(const Model &model, DynamicPrintConfig new_full_ // Invalidate just the supports step. for (const PrintObjectStatus &print_object_status : print_objects_range) update_apply_status(print_object_status.print_object->invalidate_step(posSupportMaterial)); - if (supports_differ) { - // Copy just the support volumes. - model_volume_list_update_supports(model_object, model_object_new); - } + } + if (precise_seam_differ) { + // First stop background processing before shuffling or deleting the ModelVolumes in the ModelObject's list. + this->call_cancel_callback(); + update_apply_status(false); + // Invalidate seam placement (affects G-code export). + update_apply_status(this->invalidate_step(psGCodeExport)); } else if (model_custom_seam_data_changed(model_object, model_object_new)) { update_apply_status(this->invalidate_step(psGCodeExport)); } + // Synchronize both families once, after cancellation and all affected-step invalidations. + // This also handles type changes between supports and Precise Seam before copying configs below. + if (supports_differ || precise_seam_differ) + model_volume_list_update_supports_and_seams(model_object, model_object_new); if (brim_points_differ) { model_object.brim_points = model_object_new.brim_points; update_apply_status(this->invalidate_all_steps()); @@ -1708,6 +1744,8 @@ Print::ApplyStatus Print::apply(const Model &model, DynamicPrintConfig new_full_ //FIXME What to do with m_material_id? model_volume_list_copy_configs(model_object /* dst */, model_object_new /* src */, ModelVolumeType::MODEL_PART); model_volume_list_copy_configs(model_object /* dst */, model_object_new /* src */, ModelVolumeType::PARAMETER_MODIFIER); + // Synchronize Precise Seam modifier volumes + model_volume_list_copy_configs(model_object /* dst */, model_object_new /* src */, precise_seam_types); layer_height_ranges_copy_configs(model_object.layer_config_ranges /* dst */, model_object_new.layer_config_ranges /* src */); // Copy the ModelObject name, input_file and instances. The instances will be compared against PrintObject instances in the next step. model_object.name = model_object_new.name; diff --git a/src/libslic3r/PrintBase.hpp b/src/libslic3r/PrintBase.hpp index d4f99c764e..f1b158e51f 100644 --- a/src/libslic3r/PrintBase.hpp +++ b/src/libslic3r/PrintBase.hpp @@ -62,7 +62,8 @@ public: SlicingReplaceInitEmptyLayers, SlicingNeedSupportOn, SlicingEmptyGcodeLayers, - SlicingGcodeOverlap + SlicingGcodeOverlap, + SlicingPreciseSeamWarning }; typedef size_t TimeStamp; diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index 92e7067ae5..440f3e761a 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -626,7 +626,9 @@ static const t_config_enum_values s_keys_map_NozzleVolumeType = { { "Standard", nvtStandard }, { "High Flow", nvtHighFlow }, { "TPU High Flow", nvtTPUHighFlow }, - { "Hybrid", nvtHybrid } + { "Hybrid", nvtHybrid }, + { "E3D High Flow", nvtE3DHighFlow }, + { "Extra High Flow", nvtExtraHighFlow } }; CONFIG_OPTION_ENUM_DEFINE_STATIC_MAPS(NozzleVolumeType) @@ -676,9 +678,34 @@ int get_config_index_base(NozzleVolumeType volume_type, ExtruderType extruder_ty for (int index = 0; index < int(variant_list.size()); ++index) { if (extruder_variant == variant_list[index] && variant_ids_1based[index] == variant_id_1based) { return index; } } + // Without this variant, use the id's own first variant (usually Standard), not variant index 0, + // which belongs to the first filament or extruder. + for (int index = 0; index < int(variant_list.size()); ++index) { + if (variant_ids_1based[index] == variant_id_1based) { return index; } + } return 0; } +std::set get_extruder_supported_nozzle_volume_types(const DynamicPrintConfig &printer_config, int extruder_id) +{ + std::set supported_types; + + auto *variant_list = printer_config.option("extruder_variant_list"); + auto *extruder_types = printer_config.option("extruder_type"); + if (!variant_list || !extruder_types || extruder_id < 0 || + extruder_id >= (int) variant_list->values.size() || extruder_id >= (int) extruder_types->values.size()) + return supported_types; + + const ExtruderType extruder_type = ExtruderType(extruder_types->values[extruder_id]); + for (NozzleVolumeType volume_type : get_valid_nozzle_volume_type()) { + // An unsupported extruder type yields an empty name, which would match any list. + const std::string variant = get_extruder_variant_string(extruder_type, volume_type); + if (!variant.empty() && variant_list->values[extruder_id].find(variant) != std::string::npos) + supported_types.insert(volume_type); + } + return supported_types; +} + std::string get_nozzle_volume_type_string(NozzleVolumeType nozzle_volume_type) { if (nozzle_volume_type > nvtMaxNozzleVolumeType) { @@ -1522,7 +1549,7 @@ void PrintConfigDef::init_fff_params() def->mode = comAdvanced; def->set_default_value(new ConfigOptionFloat(1)); - def = this->add("top_solid_infill_flow_ratio", coFloat); + def = this->add("top_solid_infill_flow_ratio", coFloats); def->label = L("Top surface flow ratio"); def->category = L("Advanced"); def->tooltip = L("This factor affects the amount of material for top solid infill. " @@ -1531,7 +1558,8 @@ void PrintConfigDef::init_fff_params() def->min = 0; def->max = 2; def->mode = comAdvanced; - def->set_default_value(new ConfigOptionFloat(1)); + def->nullable = true; + def->set_default_value(new ConfigOptionFloatsNullable{1}); def = this->add("bottom_solid_infill_flow_ratio", coFloat); def->label = L("Bottom surface flow ratio"); @@ -5922,15 +5950,20 @@ void PrintConfigDef::init_fff_params() def->label = "Nozzle Volume Type"; def->tooltip = "Nozzle volume type for extruders."; def->enum_keys_map = &ConfigOptionEnum::get_enum_values(); - // Order must match the NozzleVolumeType enum values (Standard=0, High Flow=1, Hybrid=2, TPU High Flow=3). + // Listed in display order. A position is not the enum value (E3D High Flow is 5, after the reserved 4), + // so map a position to its NozzleVolumeType through enum_keys_map. def->enum_values.push_back(L("Standard")); def->enum_values.push_back(L("High Flow")); def->enum_values.push_back(L("Hybrid")); def->enum_values.push_back(L("TPU High Flow")); + def->enum_values.push_back(L("E3D High Flow")); + def->enum_values.push_back(L("Extra High Flow")); def->enum_labels.push_back(L("Standard")); def->enum_labels.push_back(L("High Flow")); def->enum_labels.push_back(L("Hybrid")); def->enum_labels.push_back(L("TPU High Flow")); + def->enum_labels.push_back(L("E3D High Flow")); + def->enum_labels.push_back(L("Extra High Flow")); def->mode = comSimple; def->set_default_value(new ConfigOptionEnumsGeneric{ NozzleVolumeType::nvtStandard }); @@ -5943,10 +5976,14 @@ void PrintConfigDef::init_fff_params() def->enum_values.push_back(L("High Flow")); def->enum_values.push_back(L("Hybrid")); def->enum_values.push_back(L("TPU High Flow")); + def->enum_values.push_back(L("E3D High Flow")); + def->enum_values.push_back(L("Extra High Flow")); def->enum_labels.push_back(L("Standard")); def->enum_labels.push_back(L("High Flow")); def->enum_labels.push_back(L("Hybrid")); def->enum_labels.push_back(L("TPU High Flow")); + def->enum_labels.push_back(L("E3D High Flow")); + def->enum_labels.push_back(L("Extra High Flow")); def->mode = comDevelop; def->set_default_value(new ConfigOptionEnumsGeneric{ NozzleVolumeType::nvtStandard }); @@ -5985,7 +6022,7 @@ void PrintConfigDef::init_fff_params() // Per-nozzle volume type. Forward-compat-only registration with no slicing consumer — nothing in // src/ reads it; the engine resolves per-nozzle volume types from `extruder_nozzle_stats` tokens // instead. Kept registered so a project/config carrying it loads without an unknown-option - // substitution warning. Registers Standard/High Flow/TPU High Flow only (no Hybrid). + // substitution warning. Registers the physical types only (no Hybrid). // Internal use only, no translation. def = this->add("extruder_nozzle_volume_type", coEnums); def->label = "Extruder nozzle volume type"; @@ -5994,9 +6031,13 @@ void PrintConfigDef::init_fff_params() def->enum_values.push_back("Standard"); def->enum_values.push_back("High Flow"); def->enum_values.push_back("TPU High Flow"); + def->enum_values.push_back("E3D High Flow"); + def->enum_values.push_back("Extra High Flow"); def->enum_labels.push_back("Standard"); def->enum_labels.push_back("High Flow"); def->enum_labels.push_back("TPU High Flow"); + def->enum_labels.push_back("E3D High Flow"); + def->enum_labels.push_back("Extra High Flow"); def->mode = comDevelop; def->set_default_value(new ConfigOptionEnumsGeneric{ NozzleVolumeType::nvtStandard }); @@ -6704,6 +6745,20 @@ void PrintConfigDef::init_fff_params() def->mode = comAdvanced; def->set_default_value(new ConfigOptionBool(false)); + def = this->add("wipe_tower_sparse_layers_combination", coBool); + def->label = L("Combine sparse layers"); + def->tooltip = L("If enabled, consecutive layers on which the prime tower has no filament change are printed as a single " + "thicker tower layer instead of one thin layer each, the same way infill combination merges sparse infill. " + "The merged layer is printed at the top of the run, at the height of everything it covers.\n\n" + "Only whole layers are merged, and never past the maximum layer height of the nozzle printing the tower " + "(three quarters of the nozzle diameter when that is left at 0). Two or more layers therefore have to fit " + "under that limit before anything changes at all: at a 0.2 mm layer height under a 0.3 mm maximum nothing " + "is merged, while at 0.1 mm three layers become one.\n\n" + "Unlike \"No sparse layers\" the tower keeps following the model, so the toolhead never has to reach down to it. " + "Has no effect with \"No sparse layers\", smooth timelapse or clumping detection, which need a tower on every layer."); + def->mode = comAdvanced; + def->set_default_value(new ConfigOptionBool(false)); + def = this->add("single_extruder_multi_material_priming", coBool); def->label = L("Prime all printing extruders"); def->tooltip = L("If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print."); @@ -9127,6 +9182,8 @@ void PrintConfigDef::handle_legacy(t_config_option_key &opt_key, std::string &va value = "tree(auto)"; } else if (opt_key == "support_base_pattern" && value == "none") { value = "hollow"; + } else if (opt_key == "tree_support_wall_count" && value == "-1") { + value = "0"; } else if (opt_key == "different_settings_to_system") { std::string copy_value = value; copy_value.erase(std::remove(copy_value.begin(), copy_value.end(), '\"'), copy_value.end()); // remove '"' in string @@ -9395,7 +9452,8 @@ std::set print_options_with_variant = { "initial_layer_travel_jerk", "default_junction_deviation", "print_extruder_id", //coInts - "print_extruder_variant" //coStrings + "print_extruder_variant", //coStrings + "top_solid_infill_flow_ratio" }; std::set filament_options_with_variant = { @@ -10052,6 +10110,13 @@ bool DynamicPrintConfig::is_using_different_extruders() return ret; } +bool DynamicPrintConfig::has_multi_variant_filament() const +{ + auto variants = dynamic_cast(this->option("filament_extruder_variant")); + auto diameters = dynamic_cast(this->option("filament_diameter")); + return variants && diameters && variants->size() > diameters->size(); +} + bool DynamicPrintConfig::support_different_extruders(int& extruder_count) const { std::set variant_set; @@ -11052,6 +11117,11 @@ void DynamicPrintConfig::update_values_to_printer_extruders_for_multiple_filamen return; } std::vector filament_maps = opt_filament_map->values; + auto opt_ids = id_name.empty()? nullptr: dynamic_cast(this->option(id_name)); + // Orca: a map shorter than the filament count must not drop the filaments past its end; + // they take the first extruder. + if (opt_ids && !opt_ids->values.empty()) + filament_maps.resize(std::max(filament_maps.size(), *std::max_element(opt_ids->values.begin(), opt_ids->values.end())), 1); size_t filament_count = filament_maps.size(); //apply process settings auto opt_extruder_type = dynamic_cast(printer_config.option("extruder_type")); @@ -11070,7 +11140,6 @@ void DynamicPrintConfig::update_values_to_printer_extruders_for_multiple_filamen // indexed out of bounds. if (opt_filament_volume_maps && opt_filament_volume_maps->values.size() == filament_count) filament_volume_maps = opt_filament_volume_maps->values; - auto opt_ids = id_name.empty()? nullptr: dynamic_cast(this->option(id_name)); std::vector variant_index; variant_index.resize(filament_count, -1); @@ -11087,9 +11156,10 @@ void DynamicPrintConfig::update_values_to_printer_extruders_for_multiple_filamen //variant index variant_index[f_index] = get_index_for_extruder(f_index+1, id_name, extruder_type, nozzle_volume_type, variant_name); if (variant_index[f_index] < 0) { - BOOST_LOG_TRIVIAL(error) << __FUNCTION__ << boost::format(", Line %1%: could not found extruder_type %2%, nozzle_volume_type %3%, filament_index %4%, extruder index %5%") + // Orca: a filament need not define every extruder variant (a Direct Drive filament on a + // Bowden printer), so this is not an invalid state: the filament's first variant is used. + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(", Line %1%: could not found extruder_type %2%, nozzle_volume_type %3%, filament_index %4%, extruder index %5%") %__LINE__ %s_keys_names_ExtruderType[extruder_type] % s_keys_names_NozzleVolumeType[nozzle_volume_type] % (f_index+1) %filament_maps[f_index]; - assert(false); //for some updates happens in a invalid state(caused by popup window) //we need to avoid crash variant_index[f_index] = 0; @@ -12347,6 +12417,12 @@ CLIMiscConfigDef::CLIMiscConfigDef() def->tooltip = L("If enabled, Arrange will allow rotation when placing objects."); def->set_default_value(new ConfigOptionBool(true)); + def = this->add("align_to_y_axis", coBool); + def->label = L("Align to Y axis when arranging"); + def->tooltip = L("If enabled, Arrange will turn each object so its long side runs along the Y axis before placing it. " + "When not given, it is on for i3 printers and off for the others, as in the GUI."); + def->set_default_value(new ConfigOptionBool(false)); + def = this->add("avoid_extrusion_cali_region", coBool); def->label = L("Avoid extrusion calibrate region when arranging"); def->tooltip = L("If enabled, Arrange will avoid extrusion calibrate region when placing objects."); diff --git a/src/libslic3r/PrintConfig.hpp b/src/libslic3r/PrintConfig.hpp index eb03c8798e..8b61280979 100644 --- a/src/libslic3r/PrintConfig.hpp +++ b/src/libslic3r/PrintConfig.hpp @@ -30,6 +30,8 @@ namespace Slic3r { +class DynamicPrintConfig; + enum GCodeFlavor : unsigned char { gcfMarlinLegacy, gcfKlipper, @@ -163,6 +165,7 @@ inline bool is_smoothable_infill_pattern(InfillPattern pattern, int multiline = case ipGrid: case ipTriangles: case ipStars: + case ipCubic: return multiline > 1; default: return false; @@ -518,8 +521,11 @@ enum NozzleVolumeType { // with more than one sub-nozzle (extruder_max_nozzle_count > 1); matched as Standard for // preset lookup and never emitted in profile variant strings nvtTPUHighFlow, // physical variant, used on H2D/H2DP 0.4 nozzles only + // 4 is reserved: E3D High Flow is 5 in BambuStudio's slice_info and device numbering. + nvtE3DHighFlow = 5, // physical variant, E3D high-flow hotend on 0.4/0.6 nozzles + nvtExtraHighFlow = 6, // Orca: physical variant with no BambuStudio or device counterpart; only profiles name it // Integer values are serialized as raw ints in 3mf plate metadata and device MQTT, so they MUST stay stable. - nvtMaxNozzleVolumeType = nvtTPUHighFlow + nvtMaxNozzleVolumeType = nvtExtraHighFlow }; enum FilamentMapMode { @@ -557,11 +563,19 @@ static std::set get_valid_nozzle_volume_type() { // Hybrid is not a physical nozzle variant: presets never define it, so it must not // produce a variant string. if (t == nvtHybrid) continue; + // Skip the reserved gap between nvtTPUHighFlow (3) and nvtE3DHighFlow (5). + if (i > nvtTPUHighFlow && i < nvtE3DHighFlow) continue; type.insert(t); } return type; } +// The nozzle volume types the given extruder physically provides, as declared by the printer +// profile's extruder_variant_list. An empty set means the profile could not be read and must be +// treated as "unknown", not as "none". nvtHybrid is never reported: it describes an extruder +// holding a mix of nozzles, not a nozzle the profile can offer. +extern std::set get_extruder_supported_nozzle_volume_types(const DynamicPrintConfig &printer_config, int extruder_id); + std::string get_nozzle_volume_type_string(NozzleVolumeType nozzle_volume_type); static std::string bed_type_to_gcode_string(const BedType type) @@ -698,8 +712,6 @@ CONFIG_OPTION_ENUM_DECLARE_STATIC_MAPS(SurfaceFillOrder) #undef CONFIG_OPTION_ENUM_DECLARE_STATIC_MAPS -class DynamicPrintConfig; - // Defines each and every configuration option of Slic3r, including the properties of the GUI dialogs. // Does not store the actual values, but defines default values. class PrintConfigDef : public ConfigDef @@ -820,6 +832,10 @@ public: //BBS bool is_using_different_extruders(); bool support_different_extruders(int& extruder_count) const; + // Whether any filament defines more than one variant (filament_extruder_variant longer than + // filament_diameter). Its variants then have to be resolved even on a printer with a single + // extruder variant, which picks the filament's variant of the same variant string. + bool has_multi_variant_filament() const; // Counts the config slots of a printer: one per (extruder x nozzle volume type) as described by // extruder_nozzle_stats, or simply one per extruder when the stats are absent/mismatched. // Fills nozzle_volume_types with each extruder's volume types in ascending enum order. @@ -1403,7 +1419,7 @@ PRINT_CONFIG_CLASS_DEFINE( ((ConfigOptionFloatsNullable, small_perimeter_threshold)) ((ConfigOptionFloatsOrPercentsNullable, small_support_perimeter_speed)) ((ConfigOptionFloatsNullable, small_support_perimeter_threshold)) - ((ConfigOptionFloat, top_solid_infill_flow_ratio)) + ((ConfigOptionFloatsNullable, top_solid_infill_flow_ratio)) ((ConfigOptionFloat, bottom_solid_infill_flow_ratio)) ((ConfigOptionFloatOrPercent, infill_anchor)) ((ConfigOptionFloatOrPercent, infill_anchor_max)) @@ -1631,6 +1647,7 @@ PRINT_CONFIG_CLASS_DEFINE( ((ConfigOptionString, toolchange_cyclic_order)) ((ConfigOptionBool, toolchange_cyclic_first_layer)) ((ConfigOptionBool, wipe_tower_no_sparse_layers)) + ((ConfigOptionBool, wipe_tower_sparse_layers_combination)) ((ConfigOptionString, change_filament_gcode)) ((ConfigOptionString, change_extrusion_role_gcode)) ((ConfigOptionString, process_change_extrusion_role_gcode)) diff --git a/src/libslic3r/PrintObjectSlice.cpp b/src/libslic3r/PrintObjectSlice.cpp index d16e381604..14bd65c9cf 100644 --- a/src/libslic3r/PrintObjectSlice.cpp +++ b/src/libslic3r/PrintObjectSlice.cpp @@ -1551,12 +1551,19 @@ ExPolygons PrintObject::_shrink_contour_holes(double contour_delta, double hole_ std::vector PrintObject::slice_support_volumes(const ModelVolumeType model_volume_type) const { - auto it_volume = this->model_object()->volumes.begin(); - auto it_volume_end = this->model_object()->volumes.end(); - for (; it_volume != it_volume_end && (*it_volume)->type() != model_volume_type; ++ it_volume) ; + // Supports merge every matching volume; Precise Seam calls the shared slicer one volume at a time. + std::vector volumes; + for (const ModelVolume *volume : this->model_object()->volumes) + if (volume->type() == model_volume_type) + volumes.push_back(volume); + return this->slice_modifier_volumes(volumes); +} + +std::vector PrintObject::slice_modifier_volumes(const std::vector &volumes) const +{ std::vector slices; - if (it_volume != it_volume_end) { - // Found at least a single support volume of model_volume_type. + if (!volumes.empty()) { + // Share layer heights, transforms and cancellation handling across the selected volumes. std::vector zs = zs_from_layers(this->layers()); std::vector merge_layers; bool merge = false; @@ -1564,27 +1571,26 @@ std::vector PrintObject::slice_support_volumes(const ModelVolumeType m auto throw_on_cancel_callback = std::function([print](){ print->throw_if_canceled(); }); MeshSlicingParamsEx params; params.trafo = this->trafo_centered(); - for (; it_volume != it_volume_end; ++ it_volume) - if ((*it_volume)->type() == model_volume_type) { - std::vector slices2 = slice_volume(*(*it_volume), zs, params, throw_on_cancel_callback); - if (slices.empty()) { - slices.reserve(slices2.size()); - for (ExPolygons &src : slices2) - slices.emplace_back(to_polygons(std::move(src))); - } else if (!slices2.empty()) { - if (merge_layers.empty()) - merge_layers.assign(zs.size(), false); - for (size_t i = 0; i < zs.size(); ++ i) { - if (slices[i].empty()) - slices[i] = to_polygons(std::move(slices2[i])); - else if (! slices2[i].empty()) { - append(slices[i], to_polygons(std::move(slices2[i]))); - merge_layers[i] = true; - merge = true; - } + for (const ModelVolume *volume : volumes) { + std::vector slices2 = slice_volume(*volume, zs, params, throw_on_cancel_callback); + if (slices.empty()) { + slices.reserve(slices2.size()); + for (ExPolygons &src : slices2) + slices.emplace_back(to_polygons(std::move(src))); + } else if (!slices2.empty()) { + if (merge_layers.empty()) + merge_layers.assign(zs.size(), false); + for (size_t i = 0; i < zs.size(); ++ i) { + if (slices[i].empty()) + slices[i] = to_polygons(std::move(slices2[i])); + else if (! slices2[i].empty()) { + append(slices[i], to_polygons(std::move(slices2[i]))); + merge_layers[i] = true; + merge = true; } } } + } if (merge) { std::vector to_merge; to_merge.reserve(zs.size()); diff --git a/src/libslic3r/TriangleSelector.cpp b/src/libslic3r/TriangleSelector.cpp index e606e09bfb..4d6007530f 100644 --- a/src/libslic3r/TriangleSelector.cpp +++ b/src/libslic3r/TriangleSelector.cpp @@ -1785,6 +1785,13 @@ TriangleSelector::TriangleSplittingData TriangleSelector::serialize() const { return out.data; } +// A split code keeps the split side (one split) or the kept side (two splits) in its upper two +// bits, where 3 is not a side. The value is ignored for a three-side split. +static bool split_code_valid(int code) +{ + return (code & 0b11) == 3 || (code >> 2) != 3; +} + void TriangleSelector::deserialize(const TriangleSplittingData &data, bool needs_reset, EnforcerBlockerType max_ebt, @@ -1819,11 +1826,12 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data, for (auto [triangle_id, ibit] : data.triangles_to_split) { assert(triangle_id < int(m_triangles.size())); - assert(ibit < int(data.bitstream.size())); - auto next_nibble = [&data, &ibit = ibit]() { + // Set when the bitstream runs out or holds an impossible split before this triangle's tree is complete. + bool corrupt = false; + auto next_nibble = [&data, &ibit = ibit, &corrupt]() { int n = 0; - for (int i = 0; i < 4; ++ i) - n |= data.bitstream[ibit ++] << i; + if (! data.read_nibble(ibit, n)) + corrupt = true; return n; }; // Decode a leaf state stored behind the "11" prefix: one nibble of (state-3) for states @@ -1842,6 +1850,10 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data, bool is_split = num_of_children != 0; // Only valid if not is_split. auto state = is_split ? EnforcerBlockerType::NONE : ((code & 0b1100) == 0b1100 ? decode_leaf_state() : EnforcerBlockerType(code >> 2)); + if (is_split && ! split_code_valid(code)) + corrupt = true; + if (corrupt) + break; // BBS if (state == to_delete_filament) @@ -1856,7 +1868,7 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data, } // Only valid if is_split. - int special_side = code >> 2; + int special_side = num_of_split_sides == 3 ? 0 : code >> 2; // Take care of the first iteration separately, so handling of the others is simpler. if (parents.empty()) { @@ -1911,47 +1923,55 @@ void TriangleSelector::deserialize(const TriangleSplittingData &data, if (parents.empty()) break; } + + if (corrupt) { + // Every split above allocated all of its children, so the partial tree unwinds cleanly. + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": malformed paint data, dropping paint of triangle " << triangle_id; + undivide_triangle(triangle_id); + m_triangles[triangle_id].set_state(EnforcerBlockerType::NONE); + } } } -void TriangleSelector::TriangleSplittingData::update_used_states(const size_t bitstream_start_idx) { - assert(bitstream_start_idx < this->bitstream.size()); - assert(!this->bitstream.empty() && this->bitstream.size() != bitstream_start_idx); - assert((this->bitstream.size() - bitstream_start_idx) % 4 == 0); +bool TriangleSelector::TriangleSplittingData::update_used_states(const size_t bitstream_start_idx) { + int ibit = static_cast(bitstream_start_idx); + uint64_t states = 0; + do { + // Walk one triangle's tree depth-first, counting the nodes still to be read; a split node adds its children. + for (int pending_nodes = 1; pending_nodes > 0; --pending_nodes) { + int code; + if (!this->read_nibble(ibit, code)) + return false; - if (this->bitstream.empty() || this->bitstream.size() == bitstream_start_idx) - return; + if (const int num_of_split_sides = code & 0b11; num_of_split_sides != 0) { + if (!split_code_valid(code)) + return false; + pending_nodes += num_of_split_sides + 1; + continue; + } - size_t nibble_idx = bitstream_start_idx; - - auto read_next_nibble = [&data_bitstream = std::as_const(this->bitstream), &nibble_idx]() -> uint8_t { - assert(nibble_idx + 3 < data_bitstream.size()); - uint8_t code = 0; - for (size_t bit_idx = 0; bit_idx < 4; ++bit_idx) - code |= data_bitstream[nibble_idx++] << bit_idx; - return code; - }; - - while (nibble_idx < this->bitstream.size()) { - const uint8_t code = read_next_nibble(); - - if (const bool is_split = (code & 0b11) != 0; is_split) - continue; - - uint8_t facet_state; - if ((code & 0b1100) == 0b1100) { - // Leaf behind the "11" prefix: one nibble of (state-3), or 0b1111 + (state-18). - const uint8_t nibble = read_next_nibble(); - facet_state = nibble == 0b1111 ? uint8_t(read_next_nibble() + 18) : uint8_t(nibble + 3); - } else { - facet_state = code >> 2; + int facet_state = code >> 2; + if (facet_state == 0b11) { + // Leaf behind the "11" prefix: one nibble of (state-3), or 0b1111 + (state-18). + int nibble; + if (!this->read_nibble(ibit, nibble)) + return false; + facet_state = nibble + 3; + if (nibble == 0b1111) { + if (!this->read_nibble(ibit, nibble)) + return false; + facet_state = nibble + 18; + } + } + states |= uint64_t(1) << facet_state; } - assert(facet_state < this->used_states.size()); - if (facet_state >= this->used_states.size()) - continue; + } while (static_cast(ibit) < this->bitstream.size()); - this->used_states[facet_state] = true; - } + // The leaf encoding tops out at state 33, so every state fits the 64-bit mask. + for (size_t state_idx = 0; state_idx < std::min(this->used_states.size(), 64); ++state_idx) + if (states & (uint64_t(1) << state_idx)) + this->used_states[state_idx] = true; + return true; } // Lightweight variant of deserialization, which only tests whether a face of test_state exists. @@ -1963,11 +1983,12 @@ bool TriangleSelector::has_facets(const TriangleSplittingData &data, const Enfor for (const TriangleBitStreamMapping &triangle_id_and_ibit : data.triangles_to_split) { int ibit = triangle_id_and_ibit.bitstream_start_idx; - assert(ibit < int(data.bitstream.size())); - auto next_nibble = [&data, &ibit = ibit]() { + // Stop reading a triangle whose stream is truncated. + bool truncated = false; + auto next_nibble = [&data, &ibit = ibit, &truncated]() { int n = 0; - for (int i = 0; i < 4; ++ i) - n |= data.bitstream[ibit ++] << i; + if (! data.read_nibble(ibit, n)) + truncated = true; return n; }; // < 0 -> negative of a number of children @@ -1985,6 +2006,8 @@ bool TriangleSelector::has_facets(const TriangleSplittingData &data, const Enfor }; int state = num_children_or_state(); + if (truncated) + continue; if (state < 0) { // Root is split. parents_children.clear(); @@ -1992,6 +2015,8 @@ bool TriangleSelector::has_facets(const TriangleSplittingData &data, const Enfor do { if (-- parents_children.back() >= 0) { int state = num_children_or_state(); + if (truncated) + break; if (state < 0) // Child is split. parents_children.emplace_back(- state); diff --git a/src/libslic3r/TriangleSelector.hpp b/src/libslic3r/TriangleSelector.hpp index 5c65bf1047..344e88cb99 100644 --- a/src/libslic3r/TriangleSelector.hpp +++ b/src/libslic3r/TriangleSelector.hpp @@ -297,8 +297,20 @@ public: std::fill(used_states.begin(), used_states.end(), false); } - // Update used states based on the bitstream. It just iterated over the bitstream from the bitstream_start_idx till the end. - void update_used_states(size_t bitstream_start_idx); + // Update used states from the triangle trees stored between bitstream_start_idx and the end of the bitstream. + // Returns false and leaves used states untouched if a tree is truncated or malformed. + bool update_used_states(size_t bitstream_start_idx); + + // Read the 4-bit code at bit index ibit (LSB first) and advance ibit past it. + // Returns false without advancing when fewer than 4 bits remain. + bool read_nibble(int &ibit, int &nibble) const { + if (ibit < 0 || static_cast(ibit) + 4 > bitstream.size()) + return false; + nibble = 0; + for (int i = 0; i < 4; ++i) + nibble |= static_cast(bitstream[ibit++]) << i; + return true; + } private: friend class cereal::access; diff --git a/src/libslic3r/Utils.hpp b/src/libslic3r/Utils.hpp index b21da72fc8..ff14e563fb 100644 --- a/src/libslic3r/Utils.hpp +++ b/src/libslic3r/Utils.hpp @@ -285,6 +285,21 @@ inline std::string sanitize_filename(const std::string &filename){ const std::regex special_chars("[/\\\\:*?\"<>|]"); return std::regex_replace(filename, special_chars, "_"); } +// Reduce an untrusted, possibly path-qualified name to a single sanitized file name. +// Returns an empty string when nothing usable remains. +inline std::string sanitize_file_basename(const std::string &name){ + const size_t sep = name.find_last_of("/\\"); + const std::string base = sanitize_filename(sep == std::string::npos ? name : name.substr(sep + 1)); + // Names made only of dots and spaces refer to the folder or its parent, or are stripped to nothing on Windows. + return base.find_first_not_of(". ") == std::string::npos ? std::string() : base; +} +// Marker file a download of this process writes to before it is renamed to filename. +boost::filesystem::path download_marker_path(const boost::filesystem::path &dest_folder, const std::string &filename); +// Finds a sanitized variant of filename, "name(N).ext" if needed, that neither an entry of dest_folder +// nor the download marker of another download uses. The marker at ignored_marker does not count. +// Returns true and the name in result, or false and the last name tried. +bool find_unused_filename(const boost::filesystem::path &dest_folder, const std::string &filename, + const boost::filesystem::path &ignored_marker, std::string &result); // File path / name / extension splitting utilities, working with UTF-8, // to be published to Perl. namespace PerlUtils { diff --git a/src/libslic3r/utils.cpp b/src/libslic3r/utils.cpp index 9def5dad17..44fad7dc25 100644 --- a/src/libslic3r/utils.cpp +++ b/src/libslic3r/utils.cpp @@ -1321,6 +1321,31 @@ unsigned get_current_pid() #endif } +boost::filesystem::path download_marker_path(const boost::filesystem::path &dest_folder, const std::string &filename) +{ + return dest_folder / (filename + "." + std::to_string(get_current_pid()) + ".download"); +} + +bool find_unused_filename(const boost::filesystem::path &dest_folder, const std::string &filename, + const boost::filesystem::path &ignored_marker, std::string &result) +{ + // Probe the name that will be written, so a name the sanitizing maps onto an existing file is versioned too. + const std::string sanitized = sanitize_filename(filename); + const std::string extension = boost::filesystem::path(sanitized).extension().string(); + const std::string stem = sanitized.substr(0, sanitized.size() - extension.size()); + auto is_used = [&](const std::string &name) { + const boost::filesystem::path marker = download_marker_path(dest_folder, name); + return boost::filesystem::exists(dest_folder / name) || (marker != ignored_marker && boost::filesystem::exists(marker)); + }; + result = sanitized; + for (size_t version = 1; is_used(result); ++version) { + if (version > 999) + return false; + result = stem + "(" + std::to_string(version) + ")" + extension; + } + return true; +} + std::string per_user_temp_id() { #ifdef WIN32 diff --git a/src/libvgcode/include/Viewer.hpp b/src/libvgcode/include/Viewer.hpp index 5141245d96..179105032d 100644 --- a/src/libvgcode/include/Viewer.hpp +++ b/src/libvgcode/include/Viewer.hpp @@ -60,6 +60,22 @@ public: // using the given camera matrices. // void render(const Mat4x4& view_matrix, const Mat4x4& projection_matrix); + // + // ORCA: realistic view. Render the toolpaths as seen from the light, to fill the caller's + // shadow map. Depth only - the caller masks colour writes and owns the framebuffer. + // + void render_shadow_casters(const Mat4x4& view_matrix, const Mat4x4& projection_matrix, const Vec3& light_position); + // + // ORCA: realistic view. The shadow map the toolpaths sample, in the given texture unit. + // intensity == 0, the default, turns the lookup off and restores the plain shading. + // + void set_shadow_map(int texture_unit, const Mat4x4& light_view_projection, float intensity, float texel_size); + // + // ORCA: tone applied to the shaded toolpaths, to pay back the light the lighting term, + // the shadow and the SSAO pass each take off. 1.0/1.0, the default, is a no-op; the + // caller decides which of the two it varies with the realistic view setting. + // + void set_tone(float exposure, float saturation); // // ************************************************************************ diff --git a/src/libvgcode/src/SegmentTemplate.cpp b/src/libvgcode/src/SegmentTemplate.cpp index 4e692d5b10..9d9872aa3b 100644 --- a/src/libvgcode/src/SegmentTemplate.cpp +++ b/src/libvgcode/src/SegmentTemplate.cpp @@ -15,7 +15,12 @@ namespace libvgcode { //| 2--0-------5--7 | //| \ | | / | //| 3-------4 | -static constexpr const std::array VERTEX_DATA = { +// The eight corners the vertex shader knows how to place. Each is sent once and +// referenced by INDEX_DATA below, so the post-transform cache can reuse it across +// the triangles that share it: the shader runs 8 times per segment instead of 24. +static constexpr const std::array VERTEX_DATA = { 0, 1, 2, 3, 4, 5, 6, 7 }; + +static constexpr const std::array INDEX_DATA = { 0, 1, 2, // front spike 0, 2, 3, // front spike 0, 3, 4, // right/bottom body @@ -31,7 +36,7 @@ void SegmentTemplate::init() if (m_vao_id != 0) return; - m_size_in_bytes_gpu += VERTEX_DATA.size() * sizeof(uint8_t); + m_size_in_bytes_gpu += (VERTEX_DATA.size() + INDEX_DATA.size()) * sizeof(uint8_t); int curr_vertex_array; glsafe(glGetIntegerv(GL_VERTEX_ARRAY_BINDING, &curr_vertex_array)); @@ -51,12 +56,22 @@ void SegmentTemplate::init() glsafe(glVertexAttribIPointer(0, 1, GL_UNSIGNED_BYTE, 0, (const void*)0)); #endif // ENABLE_OPENGL_ES + // The element buffer binding is part of the vao state, so it is left bound here + // and restored together with the vao. + glsafe(glGenBuffers(1, &m_ibo_id)); + glsafe(glBindBuffer(GL_ELEMENT_ARRAY_BUFFER, m_ibo_id)); + glsafe(glBufferData(GL_ELEMENT_ARRAY_BUFFER, INDEX_DATA.size() * sizeof(uint8_t), INDEX_DATA.data(), GL_STATIC_DRAW)); + glsafe(glBindBuffer(GL_ARRAY_BUFFER, curr_array_buffer)); glsafe(glBindVertexArray(curr_vertex_array)); } void SegmentTemplate::shutdown() { + if (m_ibo_id != 0) { + glsafe(glDeleteBuffers(1, &m_ibo_id)); + m_ibo_id = 0; + } if (m_vbo_id != 0) { glsafe(glDeleteBuffers(1, &m_vbo_id)); m_vbo_id = 0; @@ -71,14 +86,15 @@ void SegmentTemplate::shutdown() void SegmentTemplate::render(size_t count) { - if (m_vao_id == 0 || m_vbo_id == 0 || count == 0) + if (m_vao_id == 0 || m_vbo_id == 0 || m_ibo_id == 0 || count == 0) return; int curr_vertex_array; glsafe(glGetIntegerv(GL_VERTEX_ARRAY_BINDING, &curr_vertex_array)); glsafe(glBindVertexArray(m_vao_id)); - glsafe(glDrawArraysInstanced(GL_TRIANGLES, 0, static_cast(VERTEX_DATA.size()), static_cast(count))); + glsafe(glDrawElementsInstanced(GL_TRIANGLES, static_cast(INDEX_DATA.size()), GL_UNSIGNED_BYTE, + nullptr, static_cast(count))); glsafe(glBindVertexArray(curr_vertex_array)); } diff --git a/src/libvgcode/src/SegmentTemplate.hpp b/src/libvgcode/src/SegmentTemplate.hpp index f104eef5d2..117ed2b678 100644 --- a/src/libvgcode/src/SegmentTemplate.hpp +++ b/src/libvgcode/src/SegmentTemplate.hpp @@ -40,6 +40,7 @@ private: // unsigned int m_vao_id{ 0 }; unsigned int m_vbo_id{ 0 }; + unsigned int m_ibo_id{ 0 }; // // Size of the data sent to gpu, in bytes. // diff --git a/src/libvgcode/src/Shaders.hpp b/src/libvgcode/src/Shaders.hpp index 1450d1a6df..9f546d6dc8 100644 --- a/src/libvgcode/src/Shaders.hpp +++ b/src/libvgcode/src/Shaders.hpp @@ -16,7 +16,8 @@ static const char* Segments_Vertex_Shader = "#define FIX_TWISTING\n" "const vec3 light_top_dir = vec3(-0.4574957, 0.4574957, 0.7624929);\n" "const float light_top_diffuse = 0.6 * 0.8;\n" -"const float light_top_specular = 0.6 * 0.125;\n" +// ORCA: the specular was 0.6 * 0.125, too faint to give the filament any sheen. +"const float light_top_specular = 0.6 * 0.25;\n" "const float light_top_shininess = 20.0;\n" "const vec3 light_front_dir = vec3(0.6985074, 0.1397015, 0.6985074);\n" "const float light_front_diffuse = 0.6 * 0.2;\n" @@ -30,8 +31,23 @@ static const char* Segments_Vertex_Shader = "uniform samplerBuffer height_width_angle_tex;\n" "uniform samplerBuffer color_tex;\n" "uniform usamplerBuffer segment_index_tex;\n" +// ORCA: 0 during the shadow caster pass - the bias below shifts eye_position but not +// world_position, so the caster would write a depth the receiver never looks up. +"uniform float bias_scale;\n" +// draw the instances last to first, top layers before the ones they hide, so that early depth +// rejection discards most of the hidden fragments; set when the camera looks down on the print +"uniform int reverse_order;\n" +"uniform int instance_count;\n" "in int vertex_id;\n" "out vec3 color;\n" +"// ORCA: realistic view - the light the shadow map is able to block, kept apart from the\n" +"// ambient and emissive terms in color, which a shadow does not occlude. Their sum is the\n" +"// single lighting term this replaces, so shading is unchanged while shadows are off.\n" +"out vec3 color_direct;\n" +"// ORCA: realistic view - the fragment shader looks the fragment up in the shadow map, which\n" +"// needs its world position and, for the depth bias, its eye space normal.\n" +"out vec3 world_position;\n" +"out vec3 shadow_normal;\n" "vec3 decode_color(float color) {\n" " int c = int(round(color));\n" " int r = (c >> 16) & 0xFF;\n" @@ -40,14 +56,15 @@ static const char* Segments_Vertex_Shader = " float f = 1.0 / 255.0f;\n" " return f * vec3(r, g, b);\n" "}\n" -"float lighting(vec3 eye_position, vec3 eye_normal) {\n" +"float direct_lighting(vec3 eye_position, vec3 eye_normal) {\n" " float top_diffuse = light_top_diffuse * max(dot(eye_normal, light_top_dir), 0.0);\n" " float front_diffuse = light_front_diffuse * max(dot(eye_normal, light_front_dir), 0.0);\n" " float top_specular = light_top_specular * pow(max(dot(-normalize(eye_position), reflect(-light_top_dir, eye_normal)), 0.0), light_top_shininess);\n" -" return ambient + top_diffuse + front_diffuse + top_specular + emission;\n" +" return top_diffuse + front_diffuse + top_specular;\n" "}\n" "void main() {\n" -" int id_a = int(texelFetch(segment_index_tex, gl_InstanceID).r);\n" +" int instance = (reverse_order != 0) ? instance_count - 1 - gl_InstanceID : gl_InstanceID;\n" +" int id_a = int(texelFetch(segment_index_tex, instance).r);\n" " int id_b = id_a + 1;\n" " vec3 pos_a = texelFetch(position_tex, id_a).xyz;\n" " vec3 pos_b = texelFetch(position_tex, id_b).xyz;\n" @@ -135,19 +152,63 @@ static const char* Segments_Vertex_Shader = " }\n" " vec3 eye_position = (view_matrix * vec4(pos, 1.0)).xyz;\n" " // ORCA: Apply bias to z-position to avoid z-fighting\n" -" eye_position.z += bias;\n" +" eye_position.z += bias * bias_scale;\n" " vec3 eye_normal = (view_matrix * vec4(normalize(pos - endpoint_pos), 0.0)).xyz;\n" " vec3 color_base = decode_color(texelFetch(color_tex, id).r);\n" -" color = color_base * lighting(eye_position, eye_normal);\n" +" color = color_base * (ambient + emission);\n" +" color_direct = color_base * direct_lighting(eye_position, eye_normal);\n" +" world_position = pos;\n" +" shadow_normal = eye_normal;\n" " gl_Position = projection_matrix * vec4(eye_position, 1.0);\n" "}\n"; static const char* Segments_Fragment_Shader = "#version 150\n" +"// ORCA: realistic view - object-on-object and self shadows, read from the same depth map the\n" +"// rest of the 3D scene samples. shadow_intensity == 0, the default, short-circuits the lookup,\n" +"// so the toolpaths shade exactly as before whenever realistic view is off.\n" +"const vec3 SHADOW_LIGHT_DIR = vec3(-0.4574957, 0.4574957, 0.7624929);\n" +"uniform sampler2D shadow_map;\n" +"uniform mat4 shadow_light_vp;\n" +"uniform float shadow_intensity;\n" +"uniform float shadow_map_texel;\n" +// ORCA: the lighting term peaks near 0.9 and every later multiplier - the shadow, then the SSAO +// post pass - only takes more light away, so the print reads dimmer and duller than the legend +// colours. These pay that back. Both are 1.0 for an untouched image; what the caller actually +// passes in each mode is decided in GLCanvas3D::_render_gcode, not here. +"uniform float exposure;\n" +"uniform float saturation;\n" +"const vec3 LUMA = vec3(0.2126, 0.7152, 0.0722);\n" "in vec3 color;\n" +"in vec3 color_direct;\n" +"in vec3 world_position;\n" +"in vec3 shadow_normal;\n" "out vec4 fragment_color;\n" +"float shadow_shade() {\n" +" if (shadow_intensity <= 0.0)\n" +" return 1.0;\n" +" vec4 lp = shadow_light_vp * vec4(world_position, 1.0);\n" +" vec3 proj = lp.xyz / lp.w;\n" +" proj = proj * 0.5 + 0.5;\n" +" if (proj.z > 1.0)\n" +" return 1.0;\n" +" // Slope-scaled bias, as in gouraud.fs. An extrusion is only a handful of shadow-map texels\n" +" // wide, so grazing faces need the larger bias to keep self-shadow acne off the top surfaces.\n" +" float NdotL = dot(normalize(shadow_normal), SHADOW_LIGHT_DIR);\n" +" float bias = mix(0.0004, 0.004, clamp(1.0 - NdotL, 0.0, 1.0));\n" +" float sum = 0.0;\n" +" for (int x = -2; x <= 2; ++x) {\n" +" for (int y = -2; y <= 2; ++y) {\n" +" float closest = texture(shadow_map, proj.xy + vec2(float(x), float(y)) * shadow_map_texel).r;\n" +" sum += (proj.z - bias > closest) ? 1.0 : 0.0;\n" +" }\n" +" }\n" +" return 1.0 - shadow_intensity * (sum / 25.0);\n" +"}\n" "void main() {\n" -" fragment_color = vec4(color, 1.0);\n" +" vec3 c = (color + color_direct * shadow_shade()) * exposure;\n" +" c = mix(vec3(dot(c, LUMA)), c, saturation);\n" +" fragment_color = vec4(clamp(c, 0.0, 1.0), 1.0);\n" "}\n"; static const char* Options_Vertex_Shader = diff --git a/src/libvgcode/src/ShadersES.hpp b/src/libvgcode/src/ShadersES.hpp index e688fa7b4c..4194b836e3 100644 --- a/src/libvgcode/src/ShadersES.hpp +++ b/src/libvgcode/src/ShadersES.hpp @@ -17,7 +17,8 @@ static const char* Segments_Vertex_Shader_ES = "#define FIX_TWISTING\n" "const vec3 light_top_dir = vec3(-0.4574957, 0.4574957, 0.7624929);\n" "const float light_top_diffuse = 0.6 * 0.8;\n" -"const float light_top_specular = 0.6 * 0.125;\n" +// ORCA: the specular was 0.6 * 0.125, too faint to give the filament any sheen. +"const float light_top_specular = 0.6 * 0.25;\n" "const float light_top_shininess = 20.0;\n" "const vec3 light_front_dir = vec3(0.6985074, 0.1397015, 0.6985074);\n" "const float light_front_diffuse = 0.6 * 0.3;\n" @@ -33,6 +34,14 @@ static const char* Segments_Vertex_Shader_ES = "uniform usampler2D segment_index_tex;\n" "in float vertex_id_float;\n" "out vec3 color;\n" +"// ORCA: realistic view - the light the shadow map is able to block, kept apart from the\n" +"// ambient and emissive terms in color, which a shadow does not occlude. Their sum is the\n" +"// single lighting term this replaces, so shading is unchanged while shadows are off.\n" +"out vec3 color_direct;\n" +"// ORCA: realistic view - the fragment shader looks the fragment up in the shadow map, which\n" +"// needs its world position and, for the depth bias, its eye space normal.\n" +"out vec3 world_position;\n" +"out vec3 shadow_normal;\n" "vec3 decode_color(float color) {\n" " int c = int(round(color));\n" " int r = (c >> 16) & 0xFF;\n" @@ -41,11 +50,11 @@ static const char* Segments_Vertex_Shader_ES = " float f = 1.0 / 255.0f;\n" " return f * vec3(r, g, b);\n" "}\n" -"float lighting(vec3 eye_position, vec3 eye_normal) {\n" +"float direct_lighting(vec3 eye_position, vec3 eye_normal) {\n" " float top_diffuse = light_top_diffuse * max(dot(eye_normal, light_top_dir), 0.0);\n" " float front_diffuse = light_front_diffuse * max(dot(eye_normal, light_front_dir), 0.0);\n" " float top_specular = light_top_specular * pow(max(dot(-normalize(eye_position), reflect(-light_top_dir, eye_normal)), 0.0), light_top_shininess);\n" -" return ambient + top_diffuse + front_diffuse + top_specular + emission;\n" +" return top_diffuse + front_diffuse + top_specular;\n" "}\n" "ivec2 tex_coord(sampler2D sampler, int id) {\n" " ivec2 tex_size = textureSize(sampler, 0);\n" @@ -143,17 +152,64 @@ static const char* Segments_Vertex_Shader_ES = " vec3 eye_position = (view_matrix * vec4(pos, 1.0)).xyz;\n" " vec3 eye_normal = (view_matrix * vec4(normalize(pos - endpoint_pos), 0.0)).xyz;\n" " vec3 color_base = decode_color(texelFetch(color_tex, tex_coord(color_tex, id), 0).r);\n" -" color = color_base * lighting(eye_position, eye_normal);\n" +" color = color_base * (ambient + emission);\n" +" color_direct = color_base * direct_lighting(eye_position, eye_normal);\n" +" world_position = pos;\n" +" shadow_normal = eye_normal;\n" " gl_Position = projection_matrix * vec4(eye_position, 1.0);\n" "}\n"; static const char* Segments_Fragment_Shader_ES = "#version 300 es\n" "precision highp float;\n" +"// ORCA: sampler2D defaults to lowp in an ES fragment shader, far too coarse to compare\n" +"// shadow map depths against.\n" +"precision highp sampler2D;\n" +"// ORCA: realistic view - object-on-object and self shadows, read from the same depth map the\n" +"// rest of the 3D scene samples. shadow_intensity == 0, the default, short-circuits the lookup,\n" +"// so the toolpaths shade exactly as before whenever realistic view is off.\n" +"const vec3 SHADOW_LIGHT_DIR = vec3(-0.4574957, 0.4574957, 0.7624929);\n" +"uniform sampler2D shadow_map;\n" +"uniform mat4 shadow_light_vp;\n" +"uniform float shadow_intensity;\n" +"uniform float shadow_map_texel;\n" +// ORCA: the lighting term peaks near 0.9 and every later multiplier - the shadow, then the SSAO +// post pass - only takes more light away, so the print reads dimmer and duller than the legend +// colours. These pay that back. Both are 1.0 for an untouched image; what the caller actually +// passes in each mode is decided in GLCanvas3D::_render_gcode, not here. +"uniform float exposure;\n" +"uniform float saturation;\n" +"const vec3 LUMA = vec3(0.2126, 0.7152, 0.0722);\n" "in vec3 color;\n" +"in vec3 color_direct;\n" +"in vec3 world_position;\n" +"in vec3 shadow_normal;\n" "out vec4 fragment_color;\n" +"float shadow_shade() {\n" +" if (shadow_intensity <= 0.0)\n" +" return 1.0;\n" +" vec4 lp = shadow_light_vp * vec4(world_position, 1.0);\n" +" vec3 proj = lp.xyz / lp.w;\n" +" proj = proj * 0.5 + 0.5;\n" +" if (proj.z > 1.0)\n" +" return 1.0;\n" +" // Slope-scaled bias, as in gouraud.fs. An extrusion is only a handful of shadow-map texels\n" +" // wide, so grazing faces need the larger bias to keep self-shadow acne off the top surfaces.\n" +" float NdotL = dot(normalize(shadow_normal), SHADOW_LIGHT_DIR);\n" +" float bias = mix(0.0004, 0.004, clamp(1.0 - NdotL, 0.0, 1.0));\n" +" float sum = 0.0;\n" +" for (int x = -2; x <= 2; ++x) {\n" +" for (int y = -2; y <= 2; ++y) {\n" +" float closest = texture(shadow_map, proj.xy + vec2(float(x), float(y)) * shadow_map_texel).r;\n" +" sum += (proj.z - bias > closest) ? 1.0 : 0.0;\n" +" }\n" +" }\n" +" return 1.0 - shadow_intensity * (sum / 25.0);\n" +"}\n" "void main() {\n" -" fragment_color = vec4(color, 1.0);\n" +" vec3 c = (color + color_direct * shadow_shade()) * exposure;\n" +" c = mix(vec3(dot(c, LUMA)), c, saturation);\n" +" fragment_color = vec4(clamp(c, 0.0, 1.0), 1.0);\n" "}\n"; static const char* Options_Vertex_Shader_ES = diff --git a/src/libvgcode/src/Viewer.cpp b/src/libvgcode/src/Viewer.cpp index eb606598e9..61d7310508 100644 --- a/src/libvgcode/src/Viewer.cpp +++ b/src/libvgcode/src/Viewer.cpp @@ -42,6 +42,21 @@ void Viewer::render(const Mat4x4& view_matrix, const Mat4x4& projection_matrix) m_impl->render(view_matrix, projection_matrix); } +void Viewer::render_shadow_casters(const Mat4x4& view_matrix, const Mat4x4& projection_matrix, const Vec3& light_position) +{ + m_impl->render_shadow_casters(view_matrix, projection_matrix, light_position); +} + +void Viewer::set_shadow_map(int texture_unit, const Mat4x4& light_view_projection, float intensity, float texel_size) +{ + m_impl->set_shadow_map(texture_unit, light_view_projection, intensity, texel_size); +} + +void Viewer::set_tone(float exposure, float saturation) +{ + m_impl->set_tone(exposure, saturation); +} + EViewType Viewer::get_view_type() const { return m_impl->get_view_type(); diff --git a/src/libvgcode/src/ViewerImpl.cpp b/src/libvgcode/src/ViewerImpl.cpp index da1a601149..8212717931 100644 --- a/src/libvgcode/src/ViewerImpl.cpp +++ b/src/libvgcode/src/ViewerImpl.cpp @@ -763,6 +763,16 @@ void ViewerImpl::init(const std::string& opengl_context_version) m_uni_segments_height_width_angle_tex_id = glGetUniformLocation(m_segments_shader_id, "height_width_angle_tex"); m_uni_segments_colors_tex_id = glGetUniformLocation(m_segments_shader_id, "color_tex"); m_uni_segments_segment_index_tex_id = glGetUniformLocation(m_segments_shader_id, "segment_index_tex"); + m_uni_segments_reverse_order_id = glGetUniformLocation(m_segments_shader_id, "reverse_order"); + m_uni_segments_instance_count_id = glGetUniformLocation(m_segments_shader_id, "instance_count"); + // ORCA: realistic view + m_uni_segments_shadow_map_id = glGetUniformLocation(m_segments_shader_id, "shadow_map"); + m_uni_segments_shadow_light_vp_id = glGetUniformLocation(m_segments_shader_id, "shadow_light_vp"); + m_uni_segments_shadow_intensity_id = glGetUniformLocation(m_segments_shader_id, "shadow_intensity"); + m_uni_segments_shadow_map_texel_id = glGetUniformLocation(m_segments_shader_id, "shadow_map_texel"); + m_uni_segments_exposure_id = glGetUniformLocation(m_segments_shader_id, "exposure"); + m_uni_segments_saturation_id = glGetUniformLocation(m_segments_shader_id, "saturation"); + m_uni_segments_bias_scale_id = glGetUniformLocation(m_segments_shader_id, "bias_scale"); glcheck(); assert(m_uni_segments_view_matrix_id != -1 && m_uni_segments_projection_matrix_id != -1 && @@ -875,6 +885,12 @@ void ViewerImpl::reset() m_travels_time = { 0.0f, 0.0f }; m_vertices.clear(); m_vertices_colors.clear(); + // swap rather than clear: these are sized by the print, and a reset means the memory + // should go back, not sit reserved until the next load + for (std::vector& times : m_layer_start_times) + std::vector().swap(times); + std::vector().swap(m_layer_first_vertex); + std::vector().swap(m_colors_scratch); m_valid_lines_bitset.clear(); #if VGCODE_ENABLE_COG_AND_TOOL_MARKERS m_cog_marker.reset(); @@ -1048,6 +1064,37 @@ void ViewerImpl::load(GCodeInputData&& gcode_data) v.layer_duration = m_layers.get_layer_time(m_settings.time_mode, static_cast(v.layer_id)); } + // Index of the first vertex of each layer, walked back to front so that a layer with no + // vertex of its own inherits the next layer's index and the array stays non-decreasing. + if (!m_layers.empty()) { + const uint32_t vertices_count = static_cast(m_vertices.size()); + m_layer_first_vertex.assign(m_layers.count(), vertices_count); + for (uint32_t i = vertices_count; i > 0; --i) { + const uint32_t layer_id = m_vertices[i - 1].layer_id; + if (layer_id < m_layer_first_vertex.size()) + m_layer_first_vertex[layer_id] = i - 1; + } + for (size_t i = m_layer_first_vertex.size() - 1; i > 0; --i) + m_layer_first_vertex[i - 1] = std::min(m_layer_first_vertex[i - 1], m_layer_first_vertex[i]); + + // the running time at each layer's first vertex, summed in vertex order so that + // get_estimated_time_at() matches a full accumulation exactly + std::array running{}; + for (std::vector& times : m_layer_start_times) + times.assign(m_layer_first_vertex.size(), 0.0f); + size_t layer = 0; + for (size_t i = 0; i <= m_vertices.size(); ++i) { + for (; layer < m_layer_first_vertex.size() && m_layer_first_vertex[layer] == i; ++layer) { + for (size_t j = 0; j < TIME_MODES_COUNT; ++j) + m_layer_start_times[j][layer] = running[j]; + } + if (i < m_vertices.size()) { + for (size_t j = 0; j < TIME_MODES_COUNT; ++j) + running[j] += m_vertices[i].times[j]; + } + } + } + if (!m_layers.empty()) m_layers.set_view_range(0, static_cast(m_layers.count()) - 1); @@ -1261,7 +1308,10 @@ void ViewerImpl::update_colors_texture() // Based on current settings and slider position, we might want to render some // vertices as dark grey (or darkened, see above). Use either that or the normal color (from the cache). - std::vector colors(m_vertices_colors.size()); + // Reused across calls: this runs on every slider tick, and the allocation alone is + // 4 bytes per vertex of the whole print each time. + std::vector& colors = m_colors_scratch; + colors.resize(m_vertices_colors.size()); assert(colors.size() == m_vertices.size() && m_vertices_colors.size() == m_vertices.size()); for (size_t i=0; i(m_settings.time_mode)]; }); + const size_t mode = static_cast(m_settings.time_mode); + if (mode >= TIME_MODES_COUNT || id >= m_vertices.size()) + return 0.0f; + size_t first = 0; + float time = 0.0f; + const size_t layer = static_cast(m_vertices[id].layer_id); + if (layer < m_layer_first_vertex.size() && m_layer_first_vertex[layer] <= id) { + first = m_layer_first_vertex[layer]; + time = m_layer_start_times[mode][layer]; + } + for (size_t i = first; i <= id; ++i) + time += m_vertices[i].times[mode]; + return time; } Color ViewerImpl::get_vertex_color(const PathVertex& v) const @@ -1722,6 +1812,10 @@ size_t ViewerImpl::get_used_cpu_memory() const ret += sizeof(m_extrusion_roles_colors); ret += sizeof(m_options_colors); ret += STDVEC_MEMSIZE(m_vertices, PathVertex); + for (const std::vector& times : m_layer_start_times) + ret += STDVEC_MEMSIZE(times, float); + ret += STDVEC_MEMSIZE(m_layer_first_vertex, uint32_t); + ret += STDVEC_MEMSIZE(m_colors_scratch, float); ret += m_valid_lines_bitset.size_in_bytes_cpu(); ret += m_height_range.size_in_bytes_cpu(); ret += m_width_range.size_in_bytes_cpu(); @@ -1787,7 +1881,11 @@ void ViewerImpl::update_view_full_range() const bool travels_visible = m_settings.options_visibility[size_t(EOptionType::Travels)]; const bool wipes_visible = m_settings.options_visibility[size_t(EOptionType::Wipes)]; + // every vertex before m_layer_first_vertex[layers_range[0]] has a smaller layer_id, so the loop + // below would skip all of them anyway auto first_it = m_vertices.begin(); + if (layers_range[0] < m_layer_first_vertex.size()) + first_it += m_layer_first_vertex[layers_range[0]]; while (first_it != m_vertices.end() && (first_it->layer_id < layers_range[0] || !is_visible(*first_it, m_settings))) { ++first_it; @@ -1994,6 +2092,24 @@ void ViewerImpl::render_segments(const Mat4x4& view_matrix, const Mat4x4& projec glsafe(glUniformMatrix4fv(m_uni_segments_view_matrix_id, 1, GL_FALSE, view_matrix.data())); glsafe(glUniformMatrix4fv(m_uni_segments_projection_matrix_id, 1, GL_FALSE, projection_matrix.data())); glsafe(glUniform3fv(m_uni_segments_camera_position_id, 1, camera_position.data())); + // The segments come in print order, bottom layer first. Seen from above, that is back to front, + // and every hidden fragment is shaded before the one that covers it. Drawing them last to first + // lets the depth test reject the hidden ones instead. The camera looks down when the world's + // up axis points towards it, which is the view matrix's (2, 2) entry being positive. + const bool top_down = !m_rendering_shadow_casters && view_matrix[10] > 0.0f; + glsafe(glUniform1i(m_uni_segments_reverse_order_id, top_down ? 1 : 0)); +#ifndef ENABLE_OPENGL_ES + glsafe(glUniform1i(m_uni_segments_instance_count_id, static_cast(m_enabled_segments_count))); +#endif // ENABLE_OPENGL_ES + // ORCA: realistic view. The depth pass writes the map it would otherwise read, so it shades + // with the lookup off. + glsafe(glUniform1i(m_uni_segments_shadow_map_id, m_shadow_map_texture_unit)); + glsafe(glUniformMatrix4fv(m_uni_segments_shadow_light_vp_id, 1, GL_FALSE, m_shadow_light_vp.data())); + glsafe(glUniform1f(m_uni_segments_shadow_intensity_id, m_rendering_shadow_casters ? 0.0f : m_shadow_intensity)); + glsafe(glUniform1f(m_uni_segments_shadow_map_texel_id, m_shadow_map_texel)); + glsafe(glUniform1f(m_uni_segments_exposure_id, m_exposure)); + glsafe(glUniform1f(m_uni_segments_saturation_id, m_saturation)); + glsafe(glUniform1f(m_uni_segments_bias_scale_id, m_rendering_shadow_casters ? 0.0f : 1.0f)); glsafe(glDisable(GL_CULL_FACE)); diff --git a/src/libvgcode/src/ViewerImpl.hpp b/src/libvgcode/src/ViewerImpl.hpp index 4da312fc0e..707f0f6bb7 100644 --- a/src/libvgcode/src/ViewerImpl.hpp +++ b/src/libvgcode/src/ViewerImpl.hpp @@ -71,6 +71,24 @@ public: // Render the toolpaths // void render(const Mat4x4& view_matrix, const Mat4x4& projection_matrix); + // + // ORCA: realistic view. Render the toolpaths as seen from the light, to fill the caller's + // shadow map. Only depth matters here, so the caller masks colour writes; light_position + // takes the place of the camera when the segment boxes are expanded, which gives their + // silhouette as the light sees it. + // + void render_shadow_casters(const Mat4x4& view_matrix, const Mat4x4& projection_matrix, const Vec3& light_position); + // + // ORCA: realistic view. The shadow map the toolpaths sample, in the given texture unit. + // intensity == 0, the default, turns the lookup off and restores the plain shading. + // + void set_shadow_map(int texture_unit, const Mat4x4& light_view_projection, float intensity, float texel_size); + // + // ORCA: tone applied to the shaded toolpaths, to pay back the light the lighting term, + // the shadow and the SSAO pass each take off. 1.0/1.0, the default, is a no-op; the + // caller decides which of the two it varies with the realistic view setting. + // + void set_tone(float exposure, float saturation); EViewType get_view_type() const { return m_settings.view_type; } void set_view_type(EViewType type); @@ -234,6 +252,20 @@ private: // std::array m_total_time{ 0.0f, 0.0f }; // + // Running sum of the vertex estimated times at each layer's first vertex, for each time mode, + // so that get_estimated_time_at() only accumulates the vertices of one layer. + // + std::array, TIME_MODES_COUNT> m_layer_start_times; + // + // For each layer L, the index of the first vertex whose layer_id is >= L (m_vertices.size() + // if there is none). Derived from the vertices, so it stays exact whatever order they arrive in. + // + std::vector m_layer_first_vertex; + // + // Scratch buffer for update_colors_texture(), kept alive across slider steps + // + std::vector m_colors_scratch; + // // Detected travel moves times // std::array m_travels_time{ 0.0f, 0.0f }; @@ -330,6 +362,15 @@ private: int m_uni_segments_height_width_angle_tex_id{ -1 }; int m_uni_segments_colors_tex_id{ -1 }; int m_uni_segments_segment_index_tex_id{ -1 }; + int m_uni_segments_reverse_order_id{ -1 }; + int m_uni_segments_instance_count_id{ -1 }; + int m_uni_segments_shadow_map_id{ -1 }; + int m_uni_segments_shadow_light_vp_id{ -1 }; + int m_uni_segments_shadow_intensity_id{ -1 }; + int m_uni_segments_shadow_map_texel_id{ -1 }; + int m_uni_segments_exposure_id{ -1 }; + int m_uni_segments_saturation_id{ -1 }; + int m_uni_segments_bias_scale_id{ -1 }; // // Caches for OpenGL uniforms id for options shader // @@ -469,6 +510,27 @@ private: size_t m_enabled_options_tex_size{ 0 }; #endif // ENABLE_OPENGL_ES + // + // ORCA: realistic view. Shadow map state set by set_shadow_map(), consumed by the segments + // shader. m_rendering_shadow_casters forces the intensity to 0 for the depth pass, which + // must not sample the very map it is writing. + // + // Defaults past the four texture units render_segments() binds itself, so the sampler never + // aliases one of the buffer textures before the owner of the map has said where it lives. + int m_shadow_map_texture_unit{ 4 }; + Mat4x4 m_shadow_light_vp{ 1.0f, 0.0f, 0.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f, 0.0f, 1.0f, 0.0f, 0.0f, 0.0f, 0.0f, 1.0f }; + float m_shadow_intensity{ 0.0f }; + float m_shadow_map_texel{ 0.0f }; + bool m_rendering_shadow_casters{ false }; + + // + // ORCA: realistic view. Tone set by set_tone(), consumed by the segments shader. + // The identity values leave the shading as it is outside realistic view. + // + float m_exposure{ 1.0f }; + float m_saturation{ 1.0f }; + + void apply_pending_updates(); void update_view_full_range(); void update_color_ranges(); void update_heights_widths(); diff --git a/src/slic3r/CMakeLists.txt b/src/slic3r/CMakeLists.txt index ed5d91dcf4..dc6bbba163 100644 --- a/src/slic3r/CMakeLists.txt +++ b/src/slic3r/CMakeLists.txt @@ -139,8 +139,16 @@ set(SLIC3R_GUI_SOURCES GUI/TerminalDialog.hpp GUI/PluginProgressDialog.cpp GUI/PluginProgressDialog.hpp - GUI/PluginWebDialog.cpp - GUI/PluginWebDialog.hpp + GUI/WebDialog.cpp + GUI/WebDialog.hpp + GUI/DockPanel.cpp + GUI/DockPanel.hpp + GUI/WebPanel.cpp + GUI/WebPanel.hpp + GUI/Widgets/WebHosting.cpp + GUI/Widgets/WebHosting.hpp + GUI/AuiPaneLayout.cpp + GUI/AuiPaneLayout.hpp GUI/DragCanvas.cpp GUI/DragCanvas.hpp GUI/EditGCodeDialog.cpp @@ -280,6 +288,8 @@ set(SLIC3R_GUI_SOURCES GUI/FilamentMapDialog.hpp GUI/IconManager.cpp GUI/IconManager.hpp + GUI/IdleScheduler.cpp + GUI/IdleScheduler.hpp GUI/ImageGrid.cpp GUI/ImageGrid.h GUI/ImGuiWrapper.cpp @@ -349,6 +359,10 @@ set(SLIC3R_GUI_SOURCES GUI/KBShortcutsDialog.hpp GUI/KeyChord.cpp GUI/KeyChord.hpp + GUI/Lazy.cpp + GUI/Lazy.hpp + GUI/LazyPage.cpp + GUI/LazyPage.hpp GUI/LibVGCode/LibVGCodeWrapper.hpp GUI/LibVGCode/LibVGCodeWrapper.cpp GUI/LinuxDisplayBackend.cpp @@ -435,6 +449,7 @@ set(SLIC3R_GUI_SOURCES GUI/Plater.hpp GUI/PlateSettingsDialog.cpp GUI/PlateSettingsDialog.hpp + GUI/PrebuildQueue.hpp GUI/Preferences.cpp GUI/Preferences.hpp GUI/PresetBundleDialog.cpp @@ -514,6 +529,7 @@ set(SLIC3R_GUI_SOURCES GUI/SliceInfoPanel.hpp GUI/SlicingProgressNotification.cpp GUI/SlicingProgressNotification.hpp + GUI/StagedBuild.hpp GUI/StatusPanel.cpp GUI/StatusPanel.hpp GUI/StepMeshDialog.cpp diff --git a/src/slic3r/GUI/3DBed.cpp b/src/slic3r/GUI/3DBed.cpp index b69ce2bdf8..3d7db8eb32 100644 --- a/src/slic3r/GUI/3DBed.cpp +++ b/src/slic3r/GUI/3DBed.cpp @@ -625,6 +625,12 @@ void Bed3D::update_model_offset() shift(2) = -0.03; Vec3d* model_offset_ptr = const_cast(&m_model_offset); *model_offset_ptr = shift; + //BBS: TODO: hack for current stl for BBL printer + if (std::string::npos != m_model_filename.find("bbl-3dp-")) + { + (*model_offset_ptr)(0) -= m_bed_shape[2].x() / 2.0f; + (*model_offset_ptr)(1) -= m_bed_shape[2].y() / 2.0f; + } (*model_offset_ptr)(2) = -0.41 + GROUND_Z; // update extended bounding box diff --git a/src/slic3r/GUI/3DScene.cpp b/src/slic3r/GUI/3DScene.cpp index bf3cdc5303..d72407a77e 100644 --- a/src/slic3r/GUI/3DScene.cpp +++ b/src/slic3r/GUI/3DScene.cpp @@ -162,6 +162,14 @@ ColorRGBA GLVolume::SUPPORT_BLOCKER_COL = {1.0f, 0.3f, 0.3f, 0.4f}; ColorRGBA GLVolume::MODEL_HIDDEN_COL = {0.f, 0.f, 0.f, 0.3f}; +// Precise Seam modifier colors +ColorRGBA GLVolume::PRECISE_SEAM_CENTER_COL = {1.0f, 0.627f, 0.082f, 0.6f}; // FFA015 - orange +ColorRGBA GLVolume::PRECISE_SEAM_LEFT_COL = {1.0f, 0.753f, 0.0f, 0.6f}; // FFC000 - golden +ColorRGBA GLVolume::PRECISE_SEAM_RIGHT_COL = {1.0f, 0.514f, 0.0f, 0.6f}; // FF8300 - dark orange +ColorRGBA GLVolume::PRECISE_SEAM_ENFORCED_COL = {0.412f, 0.820f, 0.412f, 0.6f}; // 69D169 - green +ColorRGBA GLVolume::PRECISE_SEAM_NEUTRAL_COL = {0.655f, 0.655f, 0.655f, 0.6f}; // A7A7A7 - gray +ColorRGBA GLVolume::PRECISE_SEAM_BLOCKED_COL = {0.820f, 0.412f, 0.412f, 0.6f}; // D16969 - red + std::array GLVolume::MODEL_COLOR = { { { 1.0f, 1.0f, 0.0f, 1.f }, { 1.0f, 0.5f, 0.5f, 1.f }, @@ -363,6 +371,28 @@ ColorRGBA color_from_model_volume(const ModelVolume& model_volume) ColorRGBA color; if (model_volume.is_negative_volume()) return GLVolume::MODEL_NEGTIVE_COL; + else if (model_volume.is_precise_seam()) { + // Return color based on Precise Seam subtype. + // Exhaustive switch (no default) so -Wswitch flags any future PRECISE_SEAM_* additions. + switch (model_volume.type()) { + case ModelVolumeType::PRECISE_SEAM_CENTER: return GLVolume::PRECISE_SEAM_CENTER_COL; + case ModelVolumeType::PRECISE_SEAM_LEFT: return GLVolume::PRECISE_SEAM_LEFT_COL; + case ModelVolumeType::PRECISE_SEAM_RIGHT: return GLVolume::PRECISE_SEAM_RIGHT_COL; + case ModelVolumeType::PRECISE_SEAM_ENFORCED: return GLVolume::PRECISE_SEAM_ENFORCED_COL; + case ModelVolumeType::PRECISE_SEAM_NEUTRAL: return GLVolume::PRECISE_SEAM_NEUTRAL_COL; + case ModelVolumeType::PRECISE_SEAM_BLOCKED: return GLVolume::PRECISE_SEAM_BLOCKED_COL; + // Non-seam types are unreachable due to the outer is_precise_seam() guard; + // listed explicitly so this switch stays exhaustive over ModelVolumeType. + case ModelVolumeType::INVALID: + case ModelVolumeType::MODEL_PART: + case ModelVolumeType::NEGATIVE_VOLUME: + case ModelVolumeType::PARAMETER_MODIFIER: + case ModelVolumeType::SUPPORT_BLOCKER: + case ModelVolumeType::SUPPORT_ENFORCER: + break; + } + return GLVolume::MODEL_MIDIFIER_COL; // unreachable fallback + } else if (model_volume.is_modifier()) #if ENABLE_MODIFIERS_ALWAYS_TRANSPARENT return GLVolume::MODEL_MIDIFIER_COL; diff --git a/src/slic3r/GUI/3DScene.hpp b/src/slic3r/GUI/3DScene.hpp index 1217d32182..b70cb4f565 100644 --- a/src/slic3r/GUI/3DScene.hpp +++ b/src/slic3r/GUI/3DScene.hpp @@ -93,6 +93,13 @@ public: static ColorRGBA SUPPORT_ENFORCER_COL; static ColorRGBA SUPPORT_BLOCKER_COL; static ColorRGBA MODEL_HIDDEN_COL; + // Precise Seam modifier colors + static ColorRGBA PRECISE_SEAM_CENTER_COL; + static ColorRGBA PRECISE_SEAM_LEFT_COL; + static ColorRGBA PRECISE_SEAM_RIGHT_COL; + static ColorRGBA PRECISE_SEAM_ENFORCED_COL; + static ColorRGBA PRECISE_SEAM_NEUTRAL_COL; + static ColorRGBA PRECISE_SEAM_BLOCKED_COL; static void update_render_colors(); static void load_render_colors(); diff --git a/src/slic3r/GUI/AmsMappingPopup.cpp b/src/slic3r/GUI/AmsMappingPopup.cpp index 22ffaef034..32a580845d 100644 --- a/src/slic3r/GUI/AmsMappingPopup.cpp +++ b/src/slic3r/GUI/AmsMappingPopup.cpp @@ -819,7 +819,7 @@ AmsMapingPopup::AmsMapingPopup(wxWindow *parent, bool use_in_sync_dialog) : m_scrolled_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL | wxHSCROLL); m_scrolled_window->SetBackgroundColour(*wxWHITE); - m_scrolled_window->SetScrollRate(0, FromDIP(10)); + m_scrolled_window->SetScrollRate(0, FromDIP(20)); wxBoxSizer *title_sizer_h= new wxBoxSizer(wxHORIZONTAL); wxBoxSizer *title_sizer_v = new wxBoxSizer(wxVERTICAL); @@ -1000,13 +1000,13 @@ AmsMapingPopup::AmsMapingPopup(wxWindow *parent, bool use_in_sync_dialog) : show_pos.x = screen_size.GetLeft(); m_scrolled_window->SetMaxSize(wxSize(screen_size.GetWidth(), popup_height)); m_scrolled_window->SetMinSize(wxSize(screen_size.GetWidth(), popup_height)); - m_scrolled_window->SetScrollRate(FromDIP(10), FromDIP(10)); + m_scrolled_window->SetScrollRate(FromDIP(10), FromDIP(20)); } else { m_scrolled_window->SetMaxSize(wxSize(popup_width, popup_height)); m_scrolled_window->SetMinSize(wxSize(popup_width, popup_height)); - m_scrolled_window->SetScrollRate(0, FromDIP(10)); + m_scrolled_window->SetScrollRate(0, FromDIP(20)); } //Vertical Direction Processing @@ -2117,7 +2117,7 @@ void AmsReplaceMaterialDialog::create() identical_filament->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#009688"))); // Orca: accent teal (not brand green) m_scrollview_groups = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL); - m_scrollview_groups->SetScrollRate(5, 5); + m_scrollview_groups->SetScrollRate(5, FromDIP(20)); //m_scrollview_groups->SetMinSize(wxSize(400, 400)); //m_scrollview_groups->SetMaxSize(wxSize(400, 400)); m_scrollview_sizer = new wxBoxSizer(wxVERTICAL); diff --git a/src/slic3r/GUI/AuiPaneLayout.cpp b/src/slic3r/GUI/AuiPaneLayout.cpp new file mode 100644 index 0000000000..dc93352971 --- /dev/null +++ b/src/slic3r/GUI/AuiPaneLayout.cpp @@ -0,0 +1,20 @@ +#include "AuiPaneLayout.hpp" + +namespace Slic3r { namespace GUI { + +std::string aui_pane_layout_entry(const std::string& layout, const std::string& pane_name) +{ + // Panes are separated by '|'; SavePerspective() escapes a '|' inside a caption as "\|". + const std::string prefix = "name=" + pane_name + ";"; + size_t begin = 0; + for (size_t i = 0; i <= layout.size(); ++i) { + if (i < layout.size() && (layout[i] != '|' || (i > 0 && layout[i - 1] == '\\'))) + continue; + if (layout.compare(begin, prefix.size(), prefix) == 0) + return layout.substr(begin, i - begin); + begin = i + 1; + } + return {}; +} + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/AuiPaneLayout.hpp b/src/slic3r/GUI/AuiPaneLayout.hpp new file mode 100644 index 0000000000..e18b5ff6e1 --- /dev/null +++ b/src/slic3r/GUI/AuiPaneLayout.hpp @@ -0,0 +1,11 @@ +#pragma once + +#include + +namespace Slic3r { namespace GUI { + +// The part a wxAuiManager layout string (wxAuiManager::SavePerspective) holds for `pane_name`, in the +// form wxAuiManager::LoadPaneInfo() takes, or empty when the layout has no such pane. +std::string aui_pane_layout_entry(const std::string& layout, const std::string& pane_name); + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/Auxiliary.cpp b/src/slic3r/GUI/Auxiliary.cpp index 13ca173eb6..444daa4f91 100644 --- a/src/slic3r/GUI/Auxiliary.cpp +++ b/src/slic3r/GUI/Auxiliary.cpp @@ -606,7 +606,7 @@ AuFolderPanel::AuFolderPanel(wxWindow *parent, AuxiliaryFolderType type, wxWindo wxBoxSizer *sizer_main = new wxBoxSizer(wxVERTICAL); m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL); - m_scrolledWindow->SetScrollRate(5, 5); + m_scrolledWindow->SetScrollRate(5, FromDIP(20)); wxBoxSizer *sizer_body = new wxBoxSizer(wxVERTICAL); wxBoxSizer *sizer_top = new wxBoxSizer(wxHORIZONTAL); @@ -863,17 +863,27 @@ void AuxiliaryPanel::init_tabpanel() m_tabpanel->SetBackgroundColour(wxColour("#FEFFFF")); m_tabpanel->Bind(wxEVT_BOOKCTRL_PAGE_CHANGED, [](wxBookCtrlEvent &e) { /* Event handling */ }); - m_designer_panel = new DesignerPanel(m_tabpanel, AuxiliaryFolderType::DESIGNER); - m_pictures_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::MODEL_PICTURE); - m_bill_of_materials_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::BILL_OF_MATERIALS); - m_assembly_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::ASSEMBLY_GUIDE); - m_others_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::OTHERS); - - m_tabpanel->AddPage(m_designer_panel, _L("Basic Info"), true); - m_tabpanel->AddPage(m_pictures_panel, _L("Pictures"), false); - m_tabpanel->AddPage(m_bill_of_materials_panel, _L("Bill of Materials"), false); - m_tabpanel->AddPage(m_assembly_panel, _L("Assembly Guide"), false); - m_tabpanel->AddPage(m_others_panel, _L("Others"), false); + add_build_step([this] { + m_designer_panel = new DesignerPanel(m_tabpanel, AuxiliaryFolderType::DESIGNER); + m_tabpanel->AddPage(m_designer_panel, _L("Basic Info"), true); + }); + add_build_step([this] { + m_pictures_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::MODEL_PICTURE); + m_tabpanel->AddPage(m_pictures_panel, _L("Pictures"), false); + }); + add_build_step([this] { + m_bill_of_materials_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::BILL_OF_MATERIALS); + m_tabpanel->AddPage(m_bill_of_materials_panel, _L("Bill of Materials"), false); + }); + add_build_step([this] { + m_assembly_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::ASSEMBLY_GUIDE); + m_tabpanel->AddPage(m_assembly_panel, _L("Assembly Guide"), false); + }); + add_build_step([this] { + m_others_panel = new AuFolderPanel(m_tabpanel, AuxiliaryFolderType::OTHERS); + m_tabpanel->AddPage(m_others_panel, _L("Others"), false); + Layout(); + }); } wxWindow *AuxiliaryPanel::create_side_tools() diff --git a/src/slic3r/GUI/Auxiliary.hpp b/src/slic3r/GUI/Auxiliary.hpp index 0bced37115..76e6adf97b 100644 --- a/src/slic3r/GUI/Auxiliary.hpp +++ b/src/slic3r/GUI/Auxiliary.hpp @@ -46,6 +46,7 @@ #include "slic3r/GUI/UpgradePanel.hpp" #include "slic3r/GUI/AmsWidgets.hpp" #include "Widgets/SideTools.hpp" +#include "StagedBuild.hpp" #define AUFILE_GREY700 wxColour(107, 107, 107) #define AUFILE_GREY500 wxColour(158, 158, 158) @@ -194,7 +195,7 @@ public: }; -class AuxiliaryPanel : public wxPanel +class AuxiliaryPanel : public wxPanel, public StagedBuild { private: Tabbook *m_tabpanel = {nullptr}; diff --git a/src/slic3r/GUI/BindDialog.cpp b/src/slic3r/GUI/BindDialog.cpp index 4c6d3c249d..883765751b 100644 --- a/src/slic3r/GUI/BindDialog.cpp +++ b/src/slic3r/GUI/BindDialog.cpp @@ -558,7 +558,7 @@ PingCodeBindDialog::~PingCodeBindDialog() { //show bind failed info m_sw_bind_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(450), FromDIP(300)), wxVSCROLL); m_sw_bind_failed_info->SetBackgroundColour(*wxWHITE); - m_sw_bind_failed_info->SetScrollRate(5, 5); + m_sw_bind_failed_info->SetScrollRate(5, FromDIP(20)); m_sw_bind_failed_info->SetMinSize(wxSize(FromDIP(450), FromDIP(90))); m_sw_bind_failed_info->SetMaxSize(wxSize(FromDIP(450), FromDIP(90))); diff --git a/src/slic3r/GUI/CAD/DesignPanel.cpp b/src/slic3r/GUI/CAD/DesignPanel.cpp index d6e0329ef8..d247ddfd26 100644 --- a/src/slic3r/GUI/CAD/DesignPanel.cpp +++ b/src/slic3r/GUI/CAD/DesignPanel.cpp @@ -3521,7 +3521,7 @@ DesignPanel::DesignPanel(wxWindow* parent) cards->Show(m_box_mate, false, true); m_form->FitInside(); - m_form->SetScrollRate(0, 10); // vertical only, like Prepare's sidebar: never scroll labels out + m_form->SetScrollRate(0, FromDIP(20)); // vertical only, like Prepare's sidebar: never scroll labels out m_form->SetMinSize(wxSize(264, -1)); // Right column: a small view toolbar over the live 3D viewport that mirrors @@ -4862,13 +4862,13 @@ void DesignPanel::on_import_mesh() try { shape = GeometryEngine::mesh_to_brep(mesh.its, MESH_IMPORT_TOLERANCE, MESH_IMPORT_MERGE_ANGLE_DEG, stats); - } catch (const std::exception& e) { - fail(_L("Mesh conversion failed: ") + wxString::FromUTF8(e.what())); - return; - } catch (const Standard_Failure& e) { // OCCT throws outside std::exception + } catch (const Standard_Failure& e) { // on OCCT >= 8 Standard_Failure derives from std::exception — must precede that handler fail(_L("Mesh conversion failed: ") + wxString::FromUTF8( e.GetMessageString() ? e.GetMessageString() : "OCCT error")); return; + } catch (const std::exception& e) { + fail(_L("Mesh conversion failed: ") + wxString::FromUTF8(e.what())); + return; } if (shape.IsNull()) { fail(_L("Mesh conversion produced no geometry")); return; } diff --git a/src/slic3r/GUI/CAD/DesignPanel.hpp b/src/slic3r/GUI/CAD/DesignPanel.hpp index 88b445534d..16f0a2722c 100644 --- a/src/slic3r/GUI/CAD/DesignPanel.hpp +++ b/src/slic3r/GUI/CAD/DesignPanel.hpp @@ -12,6 +12,7 @@ #include "libslic3r/CAD/CadDocument.hpp" #include "slic3r/GUI/CAD/DesignInteraction.hpp" // CadLevel: what one Esc press means +#include "slic3r/GUI/Lazy.hpp" class ComboBox; // Orca dropdown (Widgets/ComboBox.hpp) — replaces wxChoice everywhere here class StaticBox; // Orca rounded card frame (Widgets/StaticBox.hpp) @@ -46,7 +47,7 @@ class DesignCanvas; // Design (CAD) tab: a sketch-first, Onshape-style form-driven CAD panel. // Sketch and Extrude are independent tools: the user creates a Sketch first, // then selects it and Extrudes to produce a solid. -class DesignPanel : public wxPanel +class DesignPanel : public wxPanel, public LazyInstance { public: explicit DesignPanel(wxWindow* parent); diff --git a/src/slic3r/GUI/CAD/McpControl.cpp b/src/slic3r/GUI/CAD/McpControl.cpp index 8e34e2aac8..0ad05667c3 100644 --- a/src/slic3r/GUI/CAD/McpControl.cpp +++ b/src/slic3r/GUI/CAD/McpControl.cpp @@ -1989,11 +1989,10 @@ json action_set_feature_expr(DesignPanel* panel, const json& params) // Dispatch one parsed request ON THE MAIN THREAD. Returns a JSON-RPC reply string. std::string handle_on_main(const std::string& method, const json& params, const json& id) { - MainFrame* mf = wxGetApp().mainframe; // The panel is built on first use, and in a headless session nobody clicks the tab that // would build it -- so build it here rather than refusing. Safe: this runs on the main // thread (see the CallAfter that dispatches us). - DesignPanel* panel = mf ? mf->ensure_design_panel() : nullptr; + DesignPanel* panel = DesignPanel::ensure(); if (!panel) return rpc_error(id, -32001, "Design panel not ready"); diff --git a/src/slic3r/GUI/CaliHistoryDialog.cpp b/src/slic3r/GUI/CaliHistoryDialog.cpp index 3ce8c1bb81..9b85e80c10 100644 --- a/src/slic3r/GUI/CaliHistoryDialog.cpp +++ b/src/slic3r/GUI/CaliHistoryDialog.cpp @@ -115,7 +115,7 @@ HistoryWindow::HistoryWindow(wxWindow* parent, const std::vector& auto main_sizer = new wxBoxSizer(wxVERTICAL); auto scroll_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL); - scroll_window->SetScrollRate(5, 5); + scroll_window->SetScrollRate(5, FromDIP(20)); scroll_window->SetBackgroundColour(*wxWHITE); scroll_window->SetMinSize(HISTORY_WINDOW_SIZE); scroll_window->SetSize(HISTORY_WINDOW_SIZE); @@ -818,12 +818,14 @@ NewCalibrationHistoryDialog::NewCalibrationHistoryDialog(wxWindow *parent, const if (support_nozzle_volume(curr_obj)) { Label *nozzle_name_title = new Label(top_panel, _L("Nozzle")); m_comboBox_nozzle_type = new ::ComboBox(top_panel, wxID_ANY, wxEmptyString, wxDefaultPosition, NEW_HISTORY_DIALOG_INPUT_SIZE, 0, nullptr, wxCB_READONLY); - wxArrayString nozzle_items; + // The labels are in display order, not enum order (E3D High Flow is 5 but the fifth label), so each + // item carries its NozzleVolumeType as client data. const ConfigOptionDef *nozzle_volume_type_def = print_config_def.get("nozzle_volume_type"); if (nozzle_volume_type_def && nozzle_volume_type_def->enum_keys_map) { - for (auto item : nozzle_volume_type_def->enum_labels) { nozzle_items.push_back(_L(item)); } + for (size_t i = 0; i < nozzle_volume_type_def->enum_labels.size(); ++i) + m_comboBox_nozzle_type->Append(_L(nozzle_volume_type_def->enum_labels[i]), wxNullBitmap, + (void *) (intptr_t) nozzle_volume_type_def->enum_keys_map->at(nozzle_volume_type_def->enum_values[i])); } - m_comboBox_nozzle_type->Set(nozzle_items); m_comboBox_nozzle_type->SetSelection(-1); flex_sizer->Add(nozzle_name_title); flex_sizer->Add(m_comboBox_nozzle_type); @@ -891,7 +893,7 @@ int NewCalibrationHistoryDialog::get_nozzle_combo_id_code() const void NewCalibrationHistoryDialog::on_select_nozzle_pos(wxCommandEvent &event) { - // Mirror the picked hotend's flow onto the (Orca index-based) nozzle-type combo. + // Mirror the picked hotend's flow onto the nozzle-type combo. if (!curr_obj || !m_comboBox_nozzle_id || !m_comboBox_nozzle_type || !curr_obj->GetNozzleSystem()) return; @@ -902,7 +904,9 @@ void NewCalibrationHistoryDialog::on_select_nozzle_pos(wxCommandEvent &event) DevNozzle nozzle = curr_obj->GetNozzleSystem()->GetNozzleByPosId(pos); if (nozzle.IsNormal()) { NozzleVolumeType volume_type = DevNozzle::ToNozzleVolumeType(nozzle.GetNozzleFlowType()); - m_comboBox_nozzle_type->SetSelection(static_cast(volume_type)); + for (unsigned int i = 0; i < m_comboBox_nozzle_type->GetCount(); ++i) + if (NozzleVolumeType(intptr_t(m_comboBox_nozzle_type->GetClientData(i))) == volume_type) + m_comboBox_nozzle_type->SetSelection(i); } } @@ -949,7 +953,7 @@ void NewCalibrationHistoryDialog::on_ok(wxCommandEvent &event) msg_dlg.ShowModal(); return; } - m_new_result.nozzle_volume_type = NozzleVolumeType(m_comboBox_nozzle_type->GetSelection()); + m_new_result.nozzle_volume_type = NozzleVolumeType(intptr_t(m_comboBox_nozzle_type->GetClientData(m_comboBox_nozzle_type->GetSelection()))); } auto filament_item = map_filament_items[m_comboBox_filament->GetValue().ToStdString()]; diff --git a/src/slic3r/GUI/CalibrationPanel.cpp b/src/slic3r/GUI/CalibrationPanel.cpp index bdc79c1c8e..d906a8211c 100644 --- a/src/slic3r/GUI/CalibrationPanel.cpp +++ b/src/slic3r/GUI/CalibrationPanel.cpp @@ -207,7 +207,7 @@ SelectMObjectPopup::SelectMObjectPopup(wxWindow* parent) m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, SELECT_MACHINE_LIST_SIZE, wxHSCROLL | wxVSCROLL); m_scrolledWindow->SetBackgroundColour(*wxWHITE); m_scrolledWindow->SetMinSize(SELECT_MACHINE_LIST_SIZE); - m_scrolledWindow->SetScrollRate(0, 5); + m_scrolledWindow->SetScrollRate(0, SELECT_MACHINE_ITEM_SIZE.y); auto m_sizxer_scrolledWindow = new wxBoxSizer(wxVERTICAL); m_scrolledWindow->SetSizer(m_sizxer_scrolledWindow); m_scrolledWindow->Layout(); @@ -491,14 +491,15 @@ void CalibrationPanel::init_tabpanel() { selected); } + for (int i = 0; i < (int)CALI_MODE_COUNT; i++) + add_build_steps_of(*m_cali_panels[i]); + // ORCA use standard paddings and keep arrow icon for consistent look between sidebars //for (int i = 0; i < (int)CALI_MODE_COUNT; i++) // m_tabpanel->SetPageImage(i, ""); //auto padding_size = m_tabpanel->GetBtnsListCtrl()->GetPaddingSize(0); //m_tabpanel->GetBtnsListCtrl()->SetPaddingSize({ FromDIP(15), padding_size.y }); - - m_initialized = true; } void CalibrationPanel::init_timer() @@ -534,6 +535,8 @@ void CalibrationPanel::update_print_error_info(int code, std::string msg, std::s } void CalibrationPanel::update_all() { + // Every wizard's pages exist once the last build step has run. + if (!built()) return; NetworkAgent* m_agent = wxGetApp().getAgent(); Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager(); @@ -597,7 +600,7 @@ void CalibrationPanel::update_all() { void CalibrationPanel::show_status(int status) { - if (!m_initialized) return; + if (!built()) return; if (last_status == status)return; last_status = status; diff --git a/src/slic3r/GUI/CalibrationPanel.hpp b/src/slic3r/GUI/CalibrationPanel.hpp index 1f6b097af9..960c5eed37 100644 --- a/src/slic3r/GUI/CalibrationPanel.hpp +++ b/src/slic3r/GUI/CalibrationPanel.hpp @@ -3,6 +3,7 @@ #include "CalibrationWizard.hpp" #include "Tabbook.hpp" +#include "Lazy.hpp" //#include "Widgets/SideTools.hpp" namespace Slic3r { namespace GUI { @@ -88,7 +89,7 @@ private: }; -class CalibrationPanel : public wxPanel +class CalibrationPanel : public wxPanel, public StagedBuild, public LazyInstance { public: CalibrationPanel(wxWindow* parent, wxWindowID id = wxID_ANY, const wxPoint& pos = wxDefaultPosition, const wxSize& size = wxDefaultSize, long style = wxTAB_TRAVERSAL); @@ -109,7 +110,6 @@ protected: int last_status; - bool m_initialized { false }; std::string last_conn_type = "undedefined"; MachineObject* obj{ nullptr }; MachineObject* last_obj { nullptr }; diff --git a/src/slic3r/GUI/CalibrationWizard.cpp b/src/slic3r/GUI/CalibrationWizard.cpp index f80562578d..4d6e694380 100644 --- a/src/slic3r/GUI/CalibrationWizard.cpp +++ b/src/slic3r/GUI/CalibrationWizard.cpp @@ -81,7 +81,7 @@ CalibrationWizard::CalibrationWizard(wxWindow* parent, CalibMode mode, wxWindowI wxBoxSizer* main_sizer = new wxBoxSizer(wxVERTICAL); m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxHSCROLL | wxVSCROLL); - m_scrolledWindow->SetScrollRate(5, 5); + m_scrolledWindow->SetScrollRate(5, FromDIP(20)); m_scrolledWindow->SetBackgroundColour(*wxWHITE); wxBoxSizer* padding_sizer = new wxBoxSizer(wxHORIZONTAL); @@ -130,6 +130,15 @@ CalibrationWizard::~CalibrationWizard() ; } +void CalibrationWizard::add_page_step(CalibrationWizardPageStep*& step, std::function make) +{ + add_build_step([this, &step, make = std::move(make)] { + step = new CalibrationWizardPageStep(make()); + m_all_pages_sizer->Add(step->page, 1, wxEXPAND | wxALL, FromDIP(25)); + step->page->Hide(); + }); +} + void CalibrationWizard::on_cali_job_finished(wxCommandEvent& event) { this->on_cali_job_finished(event.GetString()); @@ -520,33 +529,28 @@ void PressureAdvanceWizard::on_cali_job_finished(wxString evt_data) void PressureAdvanceWizard::create_pages() { - start_step = new CalibrationWizardPageStep(new CalibrationPAStartPage(m_scrolledWindow)); - preset_step = new CalibrationWizardPageStep(new CalibrationPresetPage(m_scrolledWindow, m_mode, false)); - cali_step = new CalibrationWizardPageStep(new CalibrationCaliPage(m_scrolledWindow, m_mode)); - save_step = new CalibrationWizardPageStep(new CalibrationPASavePage(m_scrolledWindow)); + add_page_step(start_step, [this] { return new CalibrationPAStartPage(m_scrolledWindow); }); + add_page_step(preset_step, [this] { return new CalibrationPresetPage(m_scrolledWindow, m_mode, false); }); + add_page_step(cali_step, [this] { return new CalibrationCaliPage(m_scrolledWindow, m_mode); }); + add_page_step(save_step, [this] { return new CalibrationPASavePage(m_scrolledWindow); }); - m_all_pages_sizer->Add(start_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(preset_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(cali_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(save_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); + add_build_step([this] { + m_page_steps.push_back(start_step); + m_page_steps.push_back(preset_step); + m_page_steps.push_back(cali_step); + m_page_steps.push_back(save_step); + for (int i = 0; i < m_page_steps.size() -1; i++) { + m_page_steps[i]->chain(m_page_steps[i+1]); + } - m_page_steps.push_back(start_step); - m_page_steps.push_back(preset_step); - m_page_steps.push_back(cali_step); - m_page_steps.push_back(save_step); + for (int i = 0; i < m_page_steps.size(); i++) { + m_page_steps[i]->page->Bind(EVT_CALI_ACTION, &PressureAdvanceWizard::on_cali_action, this); + } - for (int i = 0; i < m_page_steps.size() -1; i++) { - m_page_steps[i]->chain(m_page_steps[i+1]); - } - - for (int i = 0; i < m_page_steps.size(); i++) { - m_page_steps[i]->page->Hide(); - m_page_steps[i]->page->Bind(EVT_CALI_ACTION, &PressureAdvanceWizard::on_cali_action, this); - } - - if (!m_page_steps.empty()) - show_step(m_page_steps.front()); + if (!m_page_steps.empty()) + show_step(m_page_steps.front()); + }); } void PressureAdvanceWizard::on_cali_action(wxCommandEvent& evt) @@ -1053,59 +1057,46 @@ FlowRateWizard::FlowRateWizard(wxWindow* parent, wxWindowID id, const wxPoint& p void FlowRateWizard::create_pages() { - start_step = new CalibrationWizardPageStep(new CalibrationFlowRateStartPage(m_scrolledWindow)); - preset_step = new CalibrationWizardPageStep(new CalibrationPresetPage(m_scrolledWindow, m_mode, false)); + add_page_step(start_step, [this] { return new CalibrationFlowRateStartPage(m_scrolledWindow); }); + add_page_step(preset_step, [this] { return new CalibrationPresetPage(m_scrolledWindow, m_mode, false); }); // manual - cali_coarse_step = new CalibrationWizardPageStep(new CalibrationCaliPage(m_scrolledWindow, m_mode, CaliPageType::CALI_PAGE_CALI)); - coarse_save_step = new CalibrationWizardPageStep(new CalibrationFlowCoarseSavePage(m_scrolledWindow)); - cali_fine_step = new CalibrationWizardPageStep(new CalibrationCaliPage(m_scrolledWindow, m_mode, CaliPageType::CALI_PAGE_FINE_CALI)); - fine_save_step = new CalibrationWizardPageStep(new CalibrationFlowFineSavePage(m_scrolledWindow)); + add_page_step(cali_coarse_step, [this] { return new CalibrationCaliPage(m_scrolledWindow, m_mode, CaliPageType::CALI_PAGE_CALI); }); + add_page_step(coarse_save_step, [this] { return new CalibrationFlowCoarseSavePage(m_scrolledWindow); }); + add_page_step(cali_fine_step, [this] { return new CalibrationCaliPage(m_scrolledWindow, m_mode, CaliPageType::CALI_PAGE_FINE_CALI); }); + add_page_step(fine_save_step, [this] { return new CalibrationFlowFineSavePage(m_scrolledWindow); }); // auto - cali_step = new CalibrationWizardPageStep(new CalibrationCaliPage(m_scrolledWindow, m_mode)); - save_step = new CalibrationWizardPageStep(new CalibrationFlowX1SavePage(m_scrolledWindow)); + add_page_step(cali_step, [this] { return new CalibrationCaliPage(m_scrolledWindow, m_mode); }); + add_page_step(save_step, [this] { return new CalibrationFlowX1SavePage(m_scrolledWindow); }); - m_all_pages_sizer->Add(start_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(preset_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(cali_coarse_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(coarse_save_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(cali_fine_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(fine_save_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); + add_build_step([this] { + m_page_steps.push_back(start_step); + m_page_steps.push_back(preset_step); + m_page_steps.push_back(cali_coarse_step); + m_page_steps.push_back(coarse_save_step); + m_page_steps.push_back(cali_fine_step); + m_page_steps.push_back(fine_save_step); - m_all_pages_sizer->Add(cali_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); - m_all_pages_sizer->Add(save_step->page, 1, wxEXPAND | wxALL, FromDIP(25)); + //m_page_steps.push_back(cali_step); + //m_page_steps.push_back(save_step); - m_page_steps.push_back(start_step); - m_page_steps.push_back(preset_step); - m_page_steps.push_back(cali_coarse_step); - m_page_steps.push_back(coarse_save_step); - m_page_steps.push_back(cali_fine_step); - m_page_steps.push_back(fine_save_step); + for (int i = 0; i < m_page_steps.size() - 1; i++) { + m_page_steps[i]->chain(m_page_steps[i + 1]); + } - //m_page_steps.push_back(cali_step); - //m_page_steps.push_back(save_step); + for (int i = 0; i < m_page_steps.size(); i++) { + m_page_steps[i]->page->Bind(EVT_CALI_ACTION, &FlowRateWizard::on_cali_action, this); + } - for (int i = 0; i < m_page_steps.size() - 1; i++) { - m_page_steps[i]->chain(m_page_steps[i + 1]); - } + cali_step->page->Bind(EVT_CALI_ACTION, &FlowRateWizard::on_cali_action, this); + save_step->page->Bind(EVT_CALI_ACTION, &FlowRateWizard::on_cali_action, this); - // hide all pages - cali_step->page->Hide(); - save_step->page->Hide(); - for (int i = 0; i < m_page_steps.size(); i++) { - m_page_steps[i]->page->Hide(); - m_page_steps[i]->page->Bind(EVT_CALI_ACTION, &FlowRateWizard::on_cali_action, this); - } + if (!m_page_steps.empty()) + show_step(m_page_steps.front()); - - cali_step->page->Bind(EVT_CALI_ACTION, &FlowRateWizard::on_cali_action, this); - save_step->page->Bind(EVT_CALI_ACTION, &FlowRateWizard::on_cali_action, this); - - if (!m_page_steps.empty()) - show_step(m_page_steps.front()); - - set_cali_method(CalibrationMethod::CALI_METHOD_MANUAL); + set_cali_method(CalibrationMethod::CALI_METHOD_MANUAL); + }); } void FlowRateWizard::on_cali_action(wxCommandEvent& evt) diff --git a/src/slic3r/GUI/CalibrationWizard.hpp b/src/slic3r/GUI/CalibrationWizard.hpp index d72d5fcb7b..89c515eb80 100644 --- a/src/slic3r/GUI/CalibrationWizard.hpp +++ b/src/slic3r/GUI/CalibrationWizard.hpp @@ -9,6 +9,7 @@ #include "CalibrationWizardPresetPage.hpp" #include "CalibrationWizardCaliPage.hpp" #include "CalibrationWizardSavePage.hpp" +#include "StagedBuild.hpp" namespace Slic3r { namespace GUI { @@ -36,7 +37,7 @@ struct ConfigIndexValue int index{0}; }; -class CalibrationWizard : public wxPanel { +class CalibrationWizard : public wxPanel, public StagedBuild { public: CalibrationWizard(wxWindow* parent, CalibMode mode, wxWindowID id = wxID_ANY, @@ -79,6 +80,9 @@ public: protected: void on_cali_go_home(); + // Queues a page as a build step, created hidden and added to the pages sizer. + void add_page_step(CalibrationWizardPageStep*& step, std::function make); + protected: /* wx widgets*/ wxScrolledWindow* m_scrolledWindow; diff --git a/src/slic3r/GUI/CalibrationWizardCaliPage.cpp b/src/slic3r/GUI/CalibrationWizardCaliPage.cpp index 152f46f37c..2dc766dca3 100644 --- a/src/slic3r/GUI/CalibrationWizardCaliPage.cpp +++ b/src/slic3r/GUI/CalibrationWizardCaliPage.cpp @@ -192,8 +192,10 @@ void CalibrationCaliPage::update(MachineObject* obj) set_cali_img(); } + // A calibration can run before the Device tab is ever opened, and only its status + // panel shows a print error. if (obj->print_error > 0) { - StatusPanel* status_panel = Slic3r::GUI::wxGetApp().mainframe->m_monitor->get_status_panel(); + StatusPanel* status_panel = MonitorPanel::ensure()->get_status_panel(); status_panel->obj = obj; status_panel->update_error_message(); } diff --git a/src/slic3r/GUI/CalibrationWizardPage.cpp b/src/slic3r/GUI/CalibrationWizardPage.cpp index c117ec8857..ff02feab68 100644 --- a/src/slic3r/GUI/CalibrationWizardPage.cpp +++ b/src/slic3r/GUI/CalibrationWizardPage.cpp @@ -834,7 +834,7 @@ void CaliPageSendingPanel::create(wxWindow* parent) m_sw_print_failed_info = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(380), FromDIP(125)), wxVSCROLL); m_sw_print_failed_info->SetBackgroundColour(*wxWHITE); - m_sw_print_failed_info->SetScrollRate(0, 5); + m_sw_print_failed_info->SetScrollRate(0, FromDIP(20)); m_sw_print_failed_info->SetMinSize(wxSize(FromDIP(380), FromDIP(125))); m_sw_print_failed_info->SetMaxSize(wxSize(FromDIP(380), FromDIP(125))); diff --git a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp index 7a83d39dd3..f4160885cb 100644 --- a/src/slic3r/GUI/CalibrationWizardPresetPage.cpp +++ b/src/slic3r/GUI/CalibrationWizardPresetPage.cpp @@ -803,6 +803,29 @@ void CalibrationPresetPage::create_selection_panel(wxWindow* parent) #define NOZZLE_LIST_DEFAULT 1 float nozzle_diameter_list[NOZZLE_LIST_COUNT] = {0.2, 0.4, 0.6, 0.8 }; +// The nozzle_volume_type labels are in display order, not enum order (E3D High Flow is 5 but the fifth +// label), so each item carries its NozzleVolumeType as client data and is selected by that value. +static void select_nozzle_volume(ComboBox *combo, NozzleVolumeType volume_type) +{ + for (unsigned int i = 0; i < combo->GetCount(); ++i) + if (NozzleVolumeType(intptr_t(combo->GetClientData(i))) == volume_type) { + combo->SetSelection(i); + return; + } +} + +static void fill_nozzle_volume_combo(ComboBox *combo) +{ + combo->Clear(); + const ConfigOptionDef *nozzle_volume_type_def = print_config_def.get("nozzle_volume_type"); + if (nozzle_volume_type_def && nozzle_volume_type_def->enum_keys_map) { + for (size_t i = 0; i < nozzle_volume_type_def->enum_labels.size(); ++i) + combo->Append(_L(nozzle_volume_type_def->enum_labels[i]), wxNullBitmap, + (void *) (intptr_t) nozzle_volume_type_def->enum_keys_map->at(nozzle_volume_type_def->enum_values[i])); + } + select_nozzle_volume(combo, NozzleVolumeType::nvtStandard); +} + void CalibrationPresetPage::init_selection_values() { // init nozzle diameter and nozzle volume @@ -813,15 +836,7 @@ void CalibrationPresetPage::init_selection_values() } m_comboBox_nozzle_dia->SetSelection(NOZZLE_LIST_DEFAULT); - m_comboBox_nozzle_volume->Clear(); - const ConfigOptionDef *nozzle_volume_type_def = print_config_def.get("nozzle_volume_type"); - if (nozzle_volume_type_def && nozzle_volume_type_def->enum_keys_map) { - for (auto item : nozzle_volume_type_def->enum_labels) { - m_comboBox_nozzle_volume->AppendString(_L(item)); - } - } - - m_comboBox_nozzle_volume->SetSelection(int(NozzleVolumeType::nvtStandard)); + fill_nozzle_volume_combo(m_comboBox_nozzle_volume); } Preset* cur_printer_preset = get_printer_preset(curr_obj, 0.4); @@ -866,15 +881,7 @@ void CalibrationPresetPage::init_selection_values() } m_left_comboBox_nozzle_dia->SetSelection(NOZZLE_LIST_DEFAULT); - m_left_comboBox_nozzle_volume->Clear(); - const ConfigOptionDef *nozzle_volume_type_def = print_config_def.get("nozzle_volume_type"); - if (nozzle_volume_type_def && nozzle_volume_type_def->enum_keys_map) { - for (auto item : nozzle_volume_type_def->enum_labels) { - m_left_comboBox_nozzle_volume->AppendString(_L(item)); - } - } - - m_left_comboBox_nozzle_volume->SetSelection(int(NozzleVolumeType::nvtStandard)); + fill_nozzle_volume_combo(m_left_comboBox_nozzle_volume); } // right @@ -885,15 +892,7 @@ void CalibrationPresetPage::init_selection_values() } m_right_comboBox_nozzle_dia->SetSelection(NOZZLE_LIST_DEFAULT); - m_right_comboBox_nozzle_volume->Clear(); - const ConfigOptionDef *nozzle_volume_type_def = print_config_def.get("nozzle_volume_type"); - if (nozzle_volume_type_def && nozzle_volume_type_def->enum_keys_map) { - for (auto item : nozzle_volume_type_def->enum_labels) { - m_right_comboBox_nozzle_volume->AppendString(_L(item)); - } - } - - m_right_comboBox_nozzle_volume->SetSelection(int(NozzleVolumeType::nvtStandard)); + fill_nozzle_volume_combo(m_right_comboBox_nozzle_volume); } } @@ -980,13 +979,13 @@ NozzleVolumeType CalibrationPresetPage::get_nozzle_volume_type(int extruder_id) if (curr_obj) { if (curr_obj->is_multi_extruders()) { if (extruder_id == LEFT_EXTRUDER_ID) { - return NozzleVolumeType(m_left_comboBox_nozzle_volume->GetSelection()); + return NozzleVolumeType(intptr_t(m_left_comboBox_nozzle_volume->GetClientData(m_left_comboBox_nozzle_volume->GetSelection()))); } else if (extruder_id == RIGHT_EXTRUDER_ID) { - return NozzleVolumeType(m_right_comboBox_nozzle_volume->GetSelection()); + return NozzleVolumeType(intptr_t(m_right_comboBox_nozzle_volume->GetClientData(m_right_comboBox_nozzle_volume->GetSelection()))); } } else - return NozzleVolumeType(m_comboBox_nozzle_volume->GetSelection()); + return NozzleVolumeType(intptr_t(m_comboBox_nozzle_volume->GetClientData(m_comboBox_nozzle_volume->GetSelection()))); } return NozzleVolumeType::nvtStandard; } @@ -2139,7 +2138,7 @@ void CalibrationPresetPage::init_with_machine(MachineObject* obj) } if (obj->GetExtderSystem()->GetNozzleFlowType(i) != NozzleFlowType::NONE_FLOWTYPE) { - m_left_comboBox_nozzle_volume->SetSelection(int(DevNozzle::ToNozzleVolumeType(obj->GetExtderSystem()->GetNozzleFlowType(i)))); + select_nozzle_volume(m_left_comboBox_nozzle_volume, DevNozzle::ToNozzleVolumeType(obj->GetExtderSystem()->GetNozzleFlowType(i))); } else { m_left_comboBox_nozzle_volume->SetSelection(0); } @@ -2159,7 +2158,7 @@ void CalibrationPresetPage::init_with_machine(MachineObject* obj) } if (obj->GetExtderSystem()->GetNozzleFlowType(i) != NozzleFlowType::NONE_FLOWTYPE) { - m_right_comboBox_nozzle_volume->SetSelection(int(DevNozzle::ToNozzleVolumeType(obj->GetExtderSystem()->GetNozzleFlowType(i)))); + select_nozzle_volume(m_right_comboBox_nozzle_volume, DevNozzle::ToNozzleVolumeType(obj->GetExtderSystem()->GetNozzleFlowType(i))); } else { m_right_comboBox_nozzle_volume->SetSelection(0); } @@ -2197,7 +2196,7 @@ void CalibrationPresetPage::init_with_machine(MachineObject* obj) else { if ((obj->GetExtderSystem()->GetTotalExtderCount() > 0) && (obj->GetExtderSystem()->GetNozzleFlowType(0) != NozzleFlowType::NONE_FLOWTYPE)) { - m_comboBox_nozzle_volume->SetSelection(int(DevNozzle::ToNozzleVolumeType(obj->GetExtderSystem()->GetNozzleFlowType(0)))); + select_nozzle_volume(m_comboBox_nozzle_volume, DevNozzle::ToNozzleVolumeType(obj->GetExtderSystem()->GetNozzleFlowType(0))); } else { m_comboBox_nozzle_volume->SetSelection(0); } diff --git a/src/slic3r/GUI/CalibrationWizardSavePage.cpp b/src/slic3r/GUI/CalibrationWizardSavePage.cpp index 427f022d1c..fdff760078 100644 --- a/src/slic3r/GUI/CalibrationWizardSavePage.cpp +++ b/src/slic3r/GUI/CalibrationWizardSavePage.cpp @@ -732,6 +732,7 @@ void CaliPASaveAutoPanel::sync_cali_result_for_multi_extruder(const std::vector< case NozzleVolumeType::nvtStandard: nozzle_id_str += _L("Standard Flow"); break; case NozzleVolumeType::nvtHighFlow: nozzle_id_str += _L("High Flow"); break; case NozzleVolumeType::nvtTPUHighFlow: nozzle_id_str += _L("TPU High Flow"); break; + case NozzleVolumeType::nvtE3DHighFlow: nozzle_id_str += _L("E3D High Flow"); break; default: break; } nozzle_id_value->SetLabel(nozzle_id_str); diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp index f40c71ec4a..5a58ec7b6c 100644 --- a/src/slic3r/GUI/ConfigManipulation.cpp +++ b/src/slic3r/GUI/ConfigManipulation.cpp @@ -1046,6 +1046,8 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, in // Orca: both tower generators skip sparse layers, so this is not a wipe tower 2 exclusive. toggle_line("wipe_tower_no_sparse_layers", have_prime_tower); + // Dropping the sparse layers outright leaves nothing to combine, so the two are exclusive. + toggle_line("wipe_tower_sparse_layers_combination", have_prime_tower && !config->opt_bool("wipe_tower_no_sparse_layers")); WipeTowerWallType wipe_tower_wall_type = config->opt_enum("wipe_tower_wall_type"); bool have_rib_wall = (wipe_tower_wall_type == WipeTowerWallType::wtwRib)&&have_prime_tower; diff --git a/src/slic3r/GUI/ConfigWizard.cpp b/src/slic3r/GUI/ConfigWizard.cpp index 412df19091..7aaa0e7865 100644 --- a/src/slic3r/GUI/ConfigWizard.cpp +++ b/src/slic3r/GUI/ConfigWizard.cpp @@ -2710,7 +2710,7 @@ ConfigWizard::ConfigWizard(wxWindow *parent) SetSizerAndFit(vsizer); // We can now enable scrolling on hscroll - p->hscroll->SetScrollRate(30, 30); + p->hscroll->SetScrollRate(30, FromDIP(20)); on_window_geometry(this, [this]() { p->init_dialog_size(); diff --git a/src/slic3r/GUI/CreatePresetsDialog.cpp b/src/slic3r/GUI/CreatePresetsDialog.cpp index e6fb6e0782..16b9a5765d 100644 --- a/src/slic3r/GUI/CreatePresetsDialog.cpp +++ b/src/slic3r/GUI/CreatePresetsDialog.cpp @@ -699,7 +699,7 @@ CreateFilamentPresetDialog::CreateFilamentPresetDialog(wxWindow *parent) m_scrolled_preset_panel = new wxScrolledWindow(this, wxID_ANY); m_scrolled_preset_panel->SetMaxSize(wxSize(-1, FromDIP(350))); m_scrolled_preset_panel->SetBackgroundColour(*wxWHITE); - m_scrolled_preset_panel->SetScrollRate(5, 5); + m_scrolled_preset_panel->SetScrollRate(5, FromDIP(20)); m_scrolled_sizer = new wxBoxSizer(wxVERTICAL); m_scrolled_sizer->Add(create_item(FilamentOptionType::PRESET_FOR_PRINTER), 0, wxEXPAND | wxLEFT | wxRIGHT | wxBOTTOM, FromDIP(5)); m_scrolled_sizer->Add(0, 0, 0, wxTOP, FromDIP(5)); @@ -1593,7 +1593,7 @@ CreatePrinterPresetDialog::CreatePrinterPresetDialog(wxWindow *parent) m_page1 = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize); m_page1->SetBackgroundColour(*wxWHITE); - m_page1->SetScrollRate(5, 5); + m_page1->SetScrollRate(5, FromDIP(20)); m_page2 = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize); m_page2->SetBackgroundColour(*wxWHITE); create_printer_page1(m_page1); @@ -2652,7 +2652,7 @@ wxBoxSizer *CreatePrinterPresetDialog::create_presets_template_item(wxWindow *pa wxBoxSizer *vertical_sizer = new wxBoxSizer(wxVERTICAL); m_scrolled_preset_window = new wxScrolledWindow(parent); - m_scrolled_preset_window->SetScrollRate(5, 5); + m_scrolled_preset_window->SetScrollRate(5, FromDIP(20)); m_scrolled_preset_window->SetBackgroundColour(*wxWHITE); //m_scrolled_preset_window->SetMinSize(wxSize(FromDIP(1500), FromDIP(-1))); m_scrolled_preset_window->SetMaxSize(wxSize(FromDIP(1500), FromDIP(-1))); @@ -4297,7 +4297,7 @@ wxBoxSizer *ExportConfigsDialog::create_select_printer(wxWindow *parent) optionSizer->SetMinSize(OPTION_SIZE); horizontal_sizer->Add(optionSizer, 0, wxEXPAND | wxALL, FromDIP(10)); m_scrolled_preset_window = new wxScrolledWindow(parent); - m_scrolled_preset_window->SetScrollRate(5, 5); + m_scrolled_preset_window->SetScrollRate(5, FromDIP(20)); m_scrolled_preset_window->SetBackgroundColour(*wxWHITE); m_scrolled_preset_window->SetMaxSize(wxSize(FromDIP(660), FromDIP(400))); m_scrolled_preset_window->SetSize(wxSize(FromDIP(660), FromDIP(400))); @@ -4736,7 +4736,7 @@ wxBoxSizer *EditFilamentPresetDialog::create_preset_tree_sizer() { wxBoxSizer *filament_preset_tree_sizer = new wxBoxSizer(wxHORIZONTAL); m_preset_tree_window = new wxScrolledWindow(this); - m_preset_tree_window->SetScrollRate(5, 5); + m_preset_tree_window->SetScrollRate(5, FromDIP(20)); m_preset_tree_window->SetBackgroundColour(PRINTER_LIST_COLOUR); m_preset_tree_window->SetMinSize(wxSize(-1, FromDIP(400))); m_preset_tree_window->SetMaxSize(wxSize(-1, FromDIP(300))); diff --git a/src/slic3r/GUI/DeviceCore/DevCalib.cpp b/src/slic3r/GUI/DeviceCore/DevCalib.cpp index ddf71e0c62..6385fa77c6 100644 --- a/src/slic3r/GUI/DeviceCore/DevCalib.cpp +++ b/src/slic3r/GUI/DeviceCore/DevCalib.cpp @@ -36,7 +36,8 @@ static NozzleVolumeType convert_to_nozzle_type(const std::string &str) return NozzleVolumeType::nvtHighFlow; else if (str[1] == 'U') return NozzleVolumeType::nvtTPUHighFlow; - // Orca: no nvtE3DHighFlow in Orca's NozzleVolumeType; map 'B' to Standard + else if (str[1] == 'B') + return NozzleVolumeType::nvtE3DHighFlow; else return NozzleVolumeType::nvtStandard; } diff --git a/src/slic3r/GUI/DeviceCore/DevManager.cpp b/src/slic3r/GUI/DeviceCore/DevManager.cpp index feb6301df3..c03f0cfe59 100644 --- a/src/slic3r/GUI/DeviceCore/DevManager.cpp +++ b/src/slic3r/GUI/DeviceCore/DevManager.cpp @@ -10,6 +10,7 @@ #include "slic3r/GUI/I18N.hpp" #include "slic3r/GUI/GUI_App.hpp" #include "slic3r/GUI/Plater.hpp" +#include "slic3r/plugin/PluginManager.hpp" #include "slic3r/Utils/NetworkAgentFactory.hpp" #include "libslic3r/Time.hpp" @@ -355,7 +356,10 @@ namespace Slic3r obj->bind_state = "free"; obj->last_alive = Slic3r::Utils::get_current_time_utc(); - obj->m_is_online = true; + // Route through set_online_state() (rather than writing m_is_online directly) so the + // DeviceOnline lifecycle event fires consistently; same effective value/behavior + // here since the object was already online in the common case. + obj->set_online_state(true); obj->set_dev_name(dev_name); /* if (!obj->dev_ip.empty()) { Slic3r::GUI::wxGetApp().app_config->set_str("ip_address", obj->dev_id, obj->dev_ip); @@ -373,6 +377,10 @@ namespace Slic3r obj->bind_sec_link = sec_link; obj->dev_connection_name = connection_name; obj->bind_ssdp_version = ssdp_version; + // Discovery establishes the initial reachability state. Do not report it as an + // online transition; DeviceDiscovered below is the lifecycle event for a new + // device. Subsequent updates route through set_online_state(), so a known device + // still emits DeviceOnline/DeviceOffline when its reachability actually changes. obj->m_is_online = true; //load access code @@ -389,6 +397,15 @@ namespace Slic3r BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " New Machine, dev_id= " << dev_id << ", ip = " << dev_ip <<", printer_name = " << dev_name << ", con_type= " << connect_type <<", signal= " << printer_signal << ", bind_state= " << bind_state; + + // First discovery of a genuinely new device (not a periodic SSDP/heartbeat update to + // an already-known one, which is handled in the branch above). + { + LifecycleEventContext ctx; + ctx.name = dev_id; + ctx.code = LifecycleEvtCode::Ok; + fire_lifecycle_event(LifecycleEvent::DeviceDiscovered, ctx); + } } update_local_machine(*obj); } @@ -984,8 +1001,14 @@ namespace Slic3r } void DeviceManager::OnSelectedMachineChanged(const std::string& /*pre_dev_id*/, - const std::string& /*new_dev_id*/) + const std::string& new_dev_id) { + { + LifecycleEventContext ctx; + ctx.name = new_dev_id; // empty string is a valid deselection + ctx.code = LifecycleEvtCode::Ok; + fire_lifecycle_event(LifecycleEvent::DeviceSelected, ctx); + } if (MachineObject* obj_ = get_selected_machine()) { GUI::wxGetApp().sidebar().update_sync_status(obj_); if(m_agent->get_filament_sync_mode() == FilamentSyncMode::subscription) diff --git a/src/slic3r/GUI/DeviceCore/DevNozzleSystem.cpp b/src/slic3r/GUI/DeviceCore/DevNozzleSystem.cpp index 578149b9d3..9f1b5311c2 100644 --- a/src/slic3r/GUI/DeviceCore/DevNozzleSystem.cpp +++ b/src/slic3r/GUI/DeviceCore/DevNozzleSystem.cpp @@ -13,7 +13,7 @@ namespace Slic3r { -// ---- DevNozzle: flow/volume conversions (Standard / High Flow / TPU High Flow) ---------------------- +// ---- DevNozzle: flow/volume conversions (Standard / High Flow / TPU High Flow / E3D High Flow) ------ // Device-reported U_FLOW nozzles map to nvtTPUHighFlow so a synced TPU-HF rack activates the H2C // change_filament_gcode TPU-kit branch. nvtHybrid is a slicer-only sentinel with no device // representation, so ToNozzleFlowType(nvtHybrid) falls through to NONE_FLOWTYPE. @@ -24,6 +24,7 @@ NozzleFlowType DevNozzle::ToNozzleFlowType(const NozzleVolumeType& type) case NozzleVolumeType::nvtStandard: return NozzleFlowType::S_FLOW; case NozzleVolumeType::nvtHighFlow: return NozzleFlowType::H_FLOW; case NozzleVolumeType::nvtTPUHighFlow: return NozzleFlowType::U_FLOW; + case NozzleVolumeType::nvtE3DHighFlow: return NozzleFlowType::E_FLOW; default: return NozzleFlowType::NONE_FLOWTYPE; } } @@ -34,6 +35,7 @@ NozzleVolumeType DevNozzle::ToNozzleVolumeType(const NozzleFlowType& type) case NozzleFlowType::S_FLOW: return NozzleVolumeType::nvtStandard; case NozzleFlowType::H_FLOW: return NozzleVolumeType::nvtHighFlow; case NozzleFlowType::U_FLOW: return NozzleVolumeType::nvtTPUHighFlow; + case NozzleFlowType::E_FLOW: return NozzleVolumeType::nvtE3DHighFlow; default: { BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << "nozzle flow type None convert to nozzle volume type Standard"; return NozzleVolumeType::nvtStandard; @@ -47,6 +49,7 @@ wxString DevNozzle::GetNozzleFlowTypeStr(NozzleFlowType type) case NozzleFlowType::H_FLOW: return _L("High Flow"); case NozzleFlowType::S_FLOW: return _L("Standard"); case NozzleFlowType::U_FLOW: return _L("TPU High Flow"); + case NozzleFlowType::E_FLOW: return _L("E3D High Flow"); default: break; } @@ -61,6 +64,7 @@ std::string DevNozzle::GetNozzleFlowTypeString(NozzleFlowType type) case NozzleFlowType::H_FLOW: return "High Flow"; case NozzleFlowType::S_FLOW: return "Standard"; case NozzleFlowType::U_FLOW: return "TPU High Flow"; + case NozzleFlowType::E_FLOW: return "E3D High Flow"; default: return "Unknown"; } } @@ -73,6 +77,7 @@ std::string DevNozzle::ToNozzleFlowString(const NozzleFlowType& type) case NozzleFlowType::S_FLOW: return "Standard"; case NozzleFlowType::H_FLOW: return "High Flow"; case NozzleFlowType::U_FLOW: return "TPU High Flow"; + case NozzleFlowType::E_FLOW: return "E3D High Flow"; default: return std::string(); } } @@ -408,6 +413,7 @@ static unordered_map _str2_nozzle_flow_type = { {"X", NozzleFlowType::S_FLOW}, {"E", NozzleFlowType::H_FLOW}, // E3D high-flow {"U", NozzleFlowType::U_FLOW}, // TPU 1.75 high-flow -> nvtTPUHighFlow + {"B", NozzleFlowType::E_FLOW}, // E3D High Flow -> nvtE3DHighFlow }; static unordered_map _str2_nozzle_type = { diff --git a/src/slic3r/GUI/DeviceCore/DevNozzleSystem.h b/src/slic3r/GUI/DeviceCore/DevNozzleSystem.h index 8603baeaaf..168cb94116 100644 --- a/src/slic3r/GUI/DeviceCore/DevNozzleSystem.h +++ b/src/slic3r/GUI/DeviceCore/DevNozzleSystem.h @@ -12,8 +12,9 @@ // Device flow-type mapping note (nozzle rack): the device U_FLOW value maps to nvtTPUHighFlow // (TPU High Flow), so a device-synced TPU-HF rack resolves to nvtTPUHighFlow and the H2C -// change_filament_gcode TPU-kit branch can activate. nvtHybrid is a slicer-only sentinel with no -// device representation, so it stays out of these device flow-type conversions. +// change_filament_gcode TPU-kit branch can activate. E_FLOW maps to nvtE3DHighFlow. nvtHybrid is a +// slicer-only sentinel with no device representation, so it stays out of these device flow-type +// conversions. // // GetExtruderNozzleInfo (and its ExtruderNozzleInfos aggregate) is intentionally omitted here; // the SelectMachine slicing-vs-installed nozzle comparison collects its per-extruder NozzleDef @@ -36,13 +37,13 @@ namespace Slic3r float m_diameter = 0.0f;// unknown until reported by the printer public: - // flow/volume conversions (Standard / High Flow / TPU High Flow) + // flow/volume conversions (Standard / High Flow / TPU High Flow / E3D High Flow) static NozzleFlowType ToNozzleFlowType(const NozzleVolumeType& type); static NozzleVolumeType ToNozzleVolumeType(const NozzleFlowType& type); static wxString GetNozzleFlowTypeStr(NozzleFlowType type); - static std::string GetNozzleFlowTypeString(NozzleFlowType type);// untranslated literal ("High Flow"/"Standard"/"TPU High Flow") — the filament blacklist JSON matches these raw strings, so it must NOT use the translated GetNozzleFlowTypeStr (would break non-English locales) - static std::string ToNozzleFlowString(const NozzleFlowType& type);// untranslated "Standard"/"High Flow"/"TPU High Flow" ("" for none) — the raw literal serialized into the get_auto_nozzle_mapping payload + static std::string GetNozzleFlowTypeString(NozzleFlowType type);// untranslated literal ("High Flow"/"Standard"/"TPU High Flow"/"E3D High Flow") — the filament blacklist JSON matches these raw strings, so it must NOT use the translated GetNozzleFlowTypeStr (would break non-English locales) + static std::string ToNozzleFlowString(const NozzleFlowType& type);// untranslated "Standard"/"High Flow"/"TPU High Flow"/"E3D High Flow" ("" for none) — the raw literal serialized into the get_auto_nozzle_mapping payload static wxString GetNozzleTypeStr(NozzleType type); public: diff --git a/src/slic3r/GUI/DeviceErrorDialog.cpp b/src/slic3r/GUI/DeviceErrorDialog.cpp index 2a55d77d24..4e81135a75 100644 --- a/src/slic3r/GUI/DeviceErrorDialog.cpp +++ b/src/slic3r/GUI/DeviceErrorDialog.cpp @@ -39,7 +39,7 @@ DeviceErrorDialog::DeviceErrorDialog(MachineObject* obj, wxWindow* parent, wxWin m_line_top->SetBackgroundColour(wxColour(166, 169, 170)); m_scroll_area = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); - m_scroll_area->SetScrollRate(0, 5); + m_scroll_area->SetScrollRate(0, FromDIP(20)); m_scroll_area->SetBackgroundColour(*wxWHITE); m_scroll_area->SetMinSize(wxSize(FromDIP(320), FromDIP(250))); @@ -538,7 +538,8 @@ void DeviceErrorDialog::on_button_click(ActionButton btn_id) break; } case DeviceErrorDialog::CHECK_ASSISTANT: { - wxGetApp().mainframe->m_monitor->jump_to_HMS(); // go to assistant page + if (MonitorPanel* monitor = MonitorPanel::if_built()) + monitor->jump_to_HMS(); // go to assistant page break; } case DeviceErrorDialog::FILAMENT_EXTRUDED: { @@ -568,7 +569,8 @@ void DeviceErrorDialog::on_button_click(ActionButton btn_id) } case DeviceErrorDialog::JUMP_TO_LIVEVIEW: { Slic3r::GUI::wxGetApp().mainframe->jump_to_monitor(); - Slic3r::GUI::wxGetApp().mainframe->m_monitor->jump_to_LiveView(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) + monitor->jump_to_LiveView(); break; } case DeviceErrorDialog::NO_REMINDER_NEXT_TIME: { @@ -618,7 +620,8 @@ void DeviceErrorDialog::on_button_click(ActionButton btn_id) } case DeviceErrorDialog::OK_JUMP_RACK: { Slic3r::GUI::wxGetApp().mainframe->jump_to_monitor(); - Slic3r::GUI::wxGetApp().mainframe->m_monitor->jump_to_Rack(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) + monitor->jump_to_Rack(); break; } case DeviceErrorDialog::ABORT: { diff --git a/src/slic3r/GUI/DeviceManager.cpp b/src/slic3r/GUI/DeviceManager.cpp index fd60f80d25..013e411574 100644 --- a/src/slic3r/GUI/DeviceManager.cpp +++ b/src/slic3r/GUI/DeviceManager.cpp @@ -5,6 +5,7 @@ #include "libslic3r/Time.hpp" #include "libslic3r/Thread.hpp" #include "slic3r/Utils/NetworkAgent.hpp" +#include "slic3r/plugin/PluginManager.hpp" #include "slic3r/Utils/NetworkAgentFactory.hpp" #include "GuiColor.hpp" @@ -346,6 +347,10 @@ static wxString _generate_nozzle_id(NozzleVolumeType nozzle_type, const std::str nozzle_id += "H"; break; } + case NozzleVolumeType::nvtE3DHighFlow: { + nozzle_id += "B"; + break; + } default: nozzle_id += "H"; break; @@ -367,6 +372,8 @@ NozzleVolumeType convert_to_nozzle_type(const std::string &str) res = NozzleVolumeType::nvtStandard; else if (str[1] == 'H') res = NozzleVolumeType::nvtHighFlow; + else if (str[1] == 'B') + res = NozzleVolumeType::nvtE3DHighFlow; return res; } @@ -2626,7 +2633,15 @@ void MachineObject::reset() void MachineObject::set_print_state(std::string status) { + const bool changed = (print_status != status); print_status = status; + if (changed) { + LifecycleEventContext ctx; + ctx.name = dev_id; + ctx.code = LifecycleEvtCode::Ok; + ctx.msg = print_status; + fire_lifecycle_event(LifecycleEvent::PrintStateChanged, ctx); + } } int MachineObject::connect(bool use_openssl) @@ -2648,7 +2663,10 @@ int MachineObject::connect(bool use_openssl) int MachineObject::disconnect() { if (m_agent) { - return m_agent->disconnect_printer(); + const int result = m_agent->disconnect_printer(); + if (result == 0) + set_online_state(false); + return result; } return -1; } @@ -2678,8 +2696,16 @@ bool MachineObject::is_connecting() void MachineObject::set_online_state(bool on_off) { + const bool changed = (m_is_online != on_off); m_is_online = on_off; if (!on_off) m_active_state = NotActive; + if (changed) { + LifecycleEventContext ctx; + ctx.name = dev_id; + ctx.code = LifecycleEvtCode::Ok; + ctx.msg = on_off ? "online" : "offline"; + fire_lifecycle_event(on_off ? LifecycleEvent::DeviceOnline : LifecycleEvent::DeviceOffline, ctx); + } } bool MachineObject::is_info_ready(bool check_version) const @@ -2806,13 +2832,6 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_ parse_msg_count++; std::chrono::system_clock::time_point clock_start = std::chrono::system_clock::now(); - this->set_online_state(true); - - std::chrono::system_clock::time_point curr_time = std::chrono::system_clock::now(); - auto diff1 = std::chrono::duration_cast(curr_time - last_update_time); - - /* update last received time */ - last_update_time = std::chrono::system_clock::now(); json j_pre; bool parse_ok = false; @@ -2825,8 +2844,29 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_ /* post process payload */ sanitizeToUtf8(payload); BOOST_LOG_TRIVIAL(info) << "parse_json: sanitize to utf8"; + try { + j_pre = json::parse(payload); + parse_ok = true; + } + catch (...) {} } + bool client_disconnected = false; + if (parse_ok && j_pre.is_object() && j_pre.contains("event") && j_pre["event"].is_object() && + j_pre["event"].contains("event") && j_pre["event"]["event"].is_string()) { + client_disconnected = j_pre["event"]["event"].get() == "client.disconnected"; + } + + // A disconnect notification is a transport message too, but it must not first mark an + // already-offline device as online through the generic message-received path. + set_online_state(!client_disconnected); + + std::chrono::system_clock::time_point curr_time = std::chrono::system_clock::now(); + auto diff1 = std::chrono::duration_cast(curr_time - last_update_time); + + /* update last received time */ + last_update_time = std::chrono::system_clock::now(); + try { bool restored_json = false; json j; @@ -4597,19 +4637,6 @@ int MachineObject::parse_json(std::string tunnel, std::string payload, bool key_ } } - // event info - try { - if (j.contains("event")) { - if (j["event"].contains("event")) { - if (j["event"]["event"].get() == "client.disconnected") - set_online_state(false); - else if (j["event"]["event"].get() == "client.connected") - set_online_state(true); - } - } - } - catch (...) {} - if (!key_field_only) { BOOST_LOG_TRIVIAL(trace) << "parse_json m_active_state =" << m_active_state; parse_state_changed_event(); @@ -4869,7 +4896,8 @@ void MachineObject::update_slice_info(std::string project_id, std::string profil std::string subtask_json; unsigned http_code = 0; std::string http_body; - if (m_agent->get_subtask_info(subtask_id, &subtask_json, &http_code, &http_body) == 0) { + if (m_agent->get_subtask_info(subtask_id, &subtask_json, &http_code, &http_body, + Slic3r::GUI::wxGetApp().get_printer_cloud_provider()) == 0) { try { if (!subtask_json.empty()) { diff --git a/src/slic3r/GUI/DeviceManager.hpp b/src/slic3r/GUI/DeviceManager.hpp index 914c8f7868..ca3b7c3c44 100644 --- a/src/slic3r/GUI/DeviceManager.hpp +++ b/src/slic3r/GUI/DeviceManager.hpp @@ -897,6 +897,7 @@ public: bool is_connected(); bool is_connecting(); + // Emits DeviceOnline or DeviceOffline only when the reachability state changes. void set_online_state(bool on_off); bool is_online() { return m_is_online; } bool is_info_ready(bool check_version = true) const; diff --git a/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRack.cpp b/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRack.cpp index 44394866c8..00d4c3e809 100644 --- a/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRack.cpp +++ b/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRack.cpp @@ -934,7 +934,8 @@ void wgtDeviceNozzleRackNozzleItem::OnBtnNozzleStatus(wxMouseEvent& evt) dlg.AddButton(wxID_OK,_L("Jump to the upgrade page"), true); if (dlg.ShowModal() == wxID_OK) { - wxGetApp().mainframe->m_monitor->jump_to_Upgrade(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) + monitor->jump_to_Upgrade(); }; } } diff --git a/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRackUpdate.cpp b/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRackUpdate.cpp index fac14e31d9..eae377c147 100644 --- a/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRackUpdate.cpp +++ b/src/slic3r/GUI/DeviceTab/wgtDeviceNozzleRackUpdate.cpp @@ -344,7 +344,8 @@ void wgtDeviceNozzleRackHotendUpdate::OnStatusIconClick(wxMouseEvent& event) if (dlg.ShowModal() == wxID_OK) { - wxGetApp().mainframe->m_monitor->jump_to_Upgrade(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) + monitor->jump_to_Upgrade(); wxCommandEvent evt(wxEVT_NOZZLE_JUMP_UPGRADE, GetId()); evt.SetEventObject(this); diff --git a/src/slic3r/GUI/DockPanel.cpp b/src/slic3r/GUI/DockPanel.cpp new file mode 100644 index 0000000000..0a5d25c4e7 --- /dev/null +++ b/src/slic3r/GUI/DockPanel.cpp @@ -0,0 +1,103 @@ +#include "DockPanel.hpp" + +#include "GUI_App.hpp" +#include "Plater.hpp" +#include "Widgets/WebHosting.hpp" + +#include + +#include +#include + +namespace Slic3r { namespace GUI { + +std::string plugin_pane_name(const std::string& plugin_key, const std::string& title) +{ + std::string name = "plugin:" + plugin_key + ":" + title; + std::replace_if(name.begin(), name.end(), [](char c) { return c == '|' || c == ';' || c == '=' || c == '\\'; }, '_'); + return name; +} + +DockPanel::DockPanel(wxWindow* parent, + const std::string& html, + MessageHandler on_message, + CloseHandler on_close, + CloseHandler on_destroyed) + : WebPanel(parent, web_hosting::orca_bridge_script()) + , m_html(html) + , m_on_message(std::move(on_message)) + , m_on_close(std::move(on_close)) + , m_on_destroyed(std::move(on_destroyed)) +{ + // A link asking for a new window has nowhere to open from a docked panel. + browser()->Bind(wxEVT_WEBVIEW_NEWWINDOW, [](wxWebViewEvent& event) { event.Veto(); }); +} + +DockPanel::~DockPanel() +{ + if (m_on_destroyed) + m_on_destroyed(); +} + +bool DockPanel::on_page_message(const std::string& kind, const nlohmann::json& data) +{ + if (kind == "message") { + if (m_on_message) + m_on_message(data); + return true; + } + if (kind == "close") { + request_close(); + return true; + } + return false; +} + +void DockPanel::push_message(const nlohmann::json& data) +{ + if (!m_closing) + post_to_page(data.dump(-1, ' ', false, nlohmann::json::error_handler_t::replace)); +} + +void DockPanel::fire_close() +{ + if (m_closing) + return; + m_closing = true; + if (m_on_close) { + CloseHandler on_close = std::move(m_on_close); + m_on_close = nullptr; + on_close(); + } +} + +void DockPanel::request_close() +{ + if (m_closing) + return; + fire_close(); + // A page-requested close arrives inside the web view's script callback, so destroy later; another + // close path may have destroyed the panel by then. + wxWeakRef self(this); + CallAfter([self]() { + if (self) + self->remove_pane(); + }); +} + +void DockPanel::destroy_silently() +{ + m_closing = true; + m_on_close = nullptr; + remove_pane(); +} + +void DockPanel::remove_pane() +{ + if (Plater* plater = wxGetApp().plater()) + plater->remove_dock_pane(this); + else + Destroy(); +} + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/DockPanel.hpp b/src/slic3r/GUI/DockPanel.hpp new file mode 100644 index 0000000000..a9a0a0d6b3 --- /dev/null +++ b/src/slic3r/GUI/DockPanel.hpp @@ -0,0 +1,54 @@ +#pragma once + +#include "WebPanel.hpp" + +#include +#include + +namespace Slic3r { namespace GUI { + +// Stable across sessions so the saved layout finds the pane; free of wxAuiManager layout delimiters. +std::string plugin_pane_name(const std::string& plugin_key, const std::string& title); + +// A WebPanel docked in the Plater, on the plugin-window bridge minus submit. It can be destroyed +// without the GIL, so its hooks must not capture pybind11 objects. +class DockPanel : public WebPanel +{ +public: + using MessageHandler = std::function; + using CloseHandler = std::function; + + // on_close fires once, on a user or page close. on_destroyed runs on every destruction and must + // touch host-side state only. + DockPanel(wxWindow* parent, + const std::string& html, + MessageHandler on_message, + CloseHandler on_close, + CloseHandler on_destroyed); + ~DockPanel() override; + + // Main thread only. + void push_message(const nlohmann::json& data); + // Fires on_close, then removes the pane. + void request_close(); + // Removes the pane without on_close, for plugin unload. Destroys at once: unload always comes from + // the host, never from this panel's own callbacks. + void destroy_silently(); + // Fires on_close at most once; also run by the pane's own close button. + void fire_close(); + +protected: + std::optional page_html() override { return m_html; } + bool on_page_message(const std::string& kind, const nlohmann::json& data) override; + +private: + void remove_pane(); + + std::string m_html; + bool m_closing{false}; + MessageHandler m_on_message; + CloseHandler m_on_close; + CloseHandler m_on_destroyed; +}; + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/DownloaderFileGet.cpp b/src/slic3r/GUI/DownloaderFileGet.cpp index 6ad07c43d2..4a7269affa 100644 --- a/src/slic3r/GUI/DownloaderFileGet.cpp +++ b/src/slic3r/GUI/DownloaderFileGet.cpp @@ -71,17 +71,6 @@ bool FileGet::is_subdomain(const std::string& url, const std::string& domain) return false; } -namespace { -unsigned get_current_pid() -{ -#ifdef WIN32 - return GetCurrentProcessId(); -#else - return ::getpid(); -#endif -} -} - // int = DOWNLOAD ID; string = file path wxDEFINE_EVENT(EVT_DWNLDR_FILE_COMPLETE, wxCommandEvent); // int = DOWNLOAD ID; string = error msg @@ -144,25 +133,10 @@ void FileGet::priv::get_perform() std::string extension; if (m_written == 0) { - boost::filesystem::path dest_path = m_dest_folder / m_filename; - extension = dest_path.extension().string(); - std::string just_filename = m_filename.substr(0, m_filename.size() - extension.size()); - std::string final_filename = just_filename; - // Find unsed filename + std::string final_filename; + bool found = false; try { - size_t version = 0; - while (boost::filesystem::exists(m_dest_folder / (final_filename + extension)) || boost::filesystem::exists(m_dest_folder / (final_filename + extension + "." + std::to_string(get_current_pid()) + ".download"))) - { - ++version; - if (version > 999) { - wxCommandEvent* evt = new wxCommandEvent(EVT_DWNLDR_FILE_ERROR); - evt->SetString(GUI::format_wxstr(L"Failed to find suitable filename. Last name: %1%." , (m_dest_folder / (final_filename + extension)).string())); - evt->SetInt(m_id); - m_evt_handler->QueueEvent(evt); - return; - } - final_filename = GUI::format("%1%(%2%)", just_filename, std::to_string(version)); - } + found = find_unused_filename(m_dest_folder, m_filename, m_tmp_path, final_filename); } catch (const boost::filesystem::filesystem_error& e) { wxCommandEvent* evt = new wxCommandEvent(EVT_DWNLDR_FILE_ERROR); @@ -171,10 +145,18 @@ void FileGet::priv::get_perform() m_evt_handler->QueueEvent(evt); return; } + if (!found) { + wxCommandEvent* evt = new wxCommandEvent(EVT_DWNLDR_FILE_ERROR); + evt->SetString(GUI::format_wxstr(L"Failed to find suitable filename. Last name: %1%." , (m_dest_folder / final_filename).string())); + evt->SetInt(m_id); + m_evt_handler->QueueEvent(evt); + return; + } - m_filename = sanitize_filename(final_filename + extension); + m_filename = final_filename; + extension = boost::filesystem::path(m_filename).extension().string(); - m_tmp_path = m_dest_folder / (m_filename + "." + std::to_string(get_current_pid()) + ".download"); + m_tmp_path = download_marker_path(m_dest_folder, m_filename); wxCommandEvent* evt = new wxCommandEvent(EVT_DWNLDR_FILE_NAME_CHANGE); evt->SetString(boost::nowide::widen(m_filename)); @@ -221,7 +203,32 @@ void FileGet::priv::get_perform() if(dest_path.empty()) { std::string filename = extract_remote_filename(header); if (!filename.empty()) { - m_filename = filename; + // The name comes from the server: keep it inside the destination folder and never + // replace an existing file. Keep the current name if nothing usable remains. + filename = sanitize_file_basename(filename); + std::string unused; + try { + if (filename.empty() || !find_unused_filename(m_dest_folder, filename, m_tmp_path, unused)) + unused.clear(); + } catch (const boost::filesystem::filesystem_error&) { + unused.clear(); + } + const boost::filesystem::path tmp_path = unused.empty() ? m_tmp_path : download_marker_path(m_dest_folder, unused); + if (tmp_path != m_tmp_path) { + // Move the marker to the adopted name so that other downloads see the name as taken. + // Only before anything is written, so that no downloaded data has to be carried over. + FILE* tmp_file = m_written == 0 ? fopen(wxString(tmp_path.wstring()).c_str(), "wb") : nullptr; + if (tmp_file != nullptr) { + fclose(file); + boost::system::error_code ec; + boost::filesystem::remove(m_tmp_path, ec); + file = tmp_file; + m_tmp_path = tmp_path; + } else + unused.clear(); + } + if (!unused.empty()) + m_filename = unused; dest_path = m_dest_folder / m_filename; wxCommandEvent* evt = new wxCommandEvent(EVT_DWNLDR_FILE_NAME_CHANGE); evt->SetString(boost::nowide::widen(m_filename)); @@ -327,6 +334,18 @@ void FileGet::priv::get_perform() m_evt_handler->QueueEvent(evt); } fclose(file); + // Another file may have taken the name while downloading. + if (!dest_path.empty() && boost::filesystem::exists(dest_path)) { + std::string unused; + if (!find_unused_filename(m_dest_folder, m_filename, m_tmp_path, unused)) + throw std::runtime_error("No unused file name."); + m_filename = unused; + dest_path = m_dest_folder / m_filename; + wxCommandEvent* evt = new wxCommandEvent(EVT_DWNLDR_FILE_NAME_CHANGE); + evt->SetString(boost::nowide::widen(m_filename)); + evt->SetInt(m_id); + m_evt_handler->QueueEvent(evt); + } boost::filesystem::rename(m_tmp_path, dest_path); } catch (const std::exception& /*e*/) diff --git a/src/slic3r/GUI/DragDropPanel.cpp b/src/slic3r/GUI/DragDropPanel.cpp index 0c1371c307..41c31d927b 100644 --- a/src/slic3r/GUI/DragDropPanel.cpp +++ b/src/slic3r/GUI/DragDropPanel.cpp @@ -566,7 +566,8 @@ std::vector SeparatedDragDropPanel::GetHighFlowFilaments() const const int right_eid = 1; if (nozzle_volumes->values.size() > right_eid) { int volume_type = nozzle_volumes->values[right_eid]; - if (volume_type == static_cast(NozzleVolumeType::nvtHighFlow)) { + if (volume_type == static_cast(NozzleVolumeType::nvtHighFlow) || + volume_type == static_cast(NozzleVolumeType::nvtE3DHighFlow)) { return m_unified_panel->GetAllFilaments(); } } diff --git a/src/slic3r/GUI/FilamentMapPanel.cpp b/src/slic3r/GUI/FilamentMapPanel.cpp index 0f3cc7217d..bd7d42333b 100644 --- a/src/slic3r/GUI/FilamentMapPanel.cpp +++ b/src/slic3r/GUI/FilamentMapPanel.cpp @@ -185,6 +185,12 @@ std::vector FilamentMapManualPanel::GetFilamentVolumeMaps() const auto preset_bundle = wxGetApp().preset_bundle; auto proj_config = preset_bundle->project_config; auto nozzle_volume_values = proj_config.option("nozzle_volume_type")->values; + // The high-flow panel of the right extruder also holds an E3D High Flow nozzle; keep that type + // instead of writing plain High Flow, which the extruder does not have. + const int right_extruder_id = 1; + const bool right_e3d_high_flow = nozzle_volume_values.size() > right_extruder_id && + nozzle_volume_values[right_extruder_id] == static_cast(NozzleVolumeType::nvtE3DHighFlow); + const int right_high_flow_volume = static_cast(right_e3d_high_flow ? NozzleVolumeType::nvtE3DHighFlow : NozzleVolumeType::nvtHighFlow); for (int i = 0; i < (int) volume_map.size(); ++i) { int filament_id = i + 1; @@ -199,7 +205,7 @@ std::vector FilamentMapManualPanel::GetFilamentVolumeMaps() const } } else if (std::find(right_high_flow_filaments.begin(), right_high_flow_filaments.end(), filament_id) != right_high_flow_filaments.end()) { - volume_map[i] = static_cast(NozzleVolumeType::nvtHighFlow); + volume_map[i] = right_high_flow_volume; } else if (std::find(right_standard_filaments.begin(), right_standard_filaments.end(), filament_id) != right_standard_filaments.end()) { volume_map[i] = static_cast(NozzleVolumeType::nvtStandard); diff --git a/src/slic3r/GUI/GCodeViewer.cpp b/src/slic3r/GUI/GCodeViewer.cpp index 3b3354d86f..cb3fc8d292 100644 --- a/src/slic3r/GUI/GCodeViewer.cpp +++ b/src/slic3r/GUI/GCodeViewer.cpp @@ -104,6 +104,31 @@ static std::string get_view_type_string(libvgcode::EViewType view_type) return ""; } +// ORCA: Stable, locale independent names used to persist a view type in the application config. +// Keep these in sync with the entries of libvgcode::EViewType exposed in the preview combo box. +static const std::vector>& view_type_config_map() +{ + static const std::vector> map = { + { "summary", libvgcode::EViewType::Summary }, + { "feature_type", libvgcode::EViewType::FeatureType }, + { "color_print", libvgcode::EViewType::ColorPrint }, + { "speed", libvgcode::EViewType::Speed }, + { "actual_speed", libvgcode::EViewType::ActualSpeed }, + { "acceleration", libvgcode::EViewType::Acceleration }, + { "jerk", libvgcode::EViewType::Jerk }, + { "height", libvgcode::EViewType::Height }, + { "width", libvgcode::EViewType::Width }, + { "volumetric_flow_rate", libvgcode::EViewType::VolumetricFlowRate }, + { "actual_volumetric_flow_rate", libvgcode::EViewType::ActualVolumetricFlowRate }, + { "layer_time_linear", libvgcode::EViewType::LayerTimeLinear }, + { "layer_time_logarithmic", libvgcode::EViewType::LayerTimeLogarithmic }, + { "fan_speed", libvgcode::EViewType::FanSpeed }, + { "temperature", libvgcode::EViewType::Temperature }, + { "pressure_advance", libvgcode::EViewType::PressureAdvance }, + }; + return map; +} + // Find an index of a value in a sorted vector, which is in . // Returns -1 if there is no such member. static int find_close_layer_idx(const std::vector &zs, double &z, double eps) @@ -1091,9 +1116,7 @@ void GCodeViewer::init(ConfigOptionMode mode, PresetBundle* preset_bundle) // Default view type at first slice. // May be overridden in load() once we know how many tools are actually used in the G-code. m_nozzle_nums = preset_bundle ? preset_bundle->get_printer_extruder_count() : 1; - auto it = std::find(view_type_items.begin(), view_type_items.end(), libvgcode::EViewType::FeatureType); - m_view_type_sel = (it != view_type_items.end()) ? std::distance(view_type_items.begin(), it) : 0; - set_view_type(libvgcode::EViewType::FeatureType); + apply_default_view_type(); BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(": finished"); } @@ -1114,6 +1137,73 @@ void GCodeViewer::set_scale(float scale) } } +// ORCA: Preview default view type preference, see "preview_default_view_type" in the application config. +std::string GCodeViewer::view_type_to_config_name(libvgcode::EViewType type) +{ + for (const auto& [name, value] : view_type_config_map()) { + if (value == type) + return name; + } + return std::string(); +} + +bool GCodeViewer::view_type_from_config_name(const std::string& name, libvgcode::EViewType& type) +{ + for (const auto& [config_name, value] : view_type_config_map()) { + if (config_name == name) { + type = value; + return true; + } + } + return false; +} + +std::vector> GCodeViewer::default_view_type_choices() +{ + std::vector> choices = { + { "auto", _u8L("Automatic") }, + { "last", _u8L("Last used") }, + }; + for (const auto& [name, type] : view_type_config_map()) + choices.push_back({ name, get_view_type_string(type) }); + return choices; +} + +void GCodeViewer::select_view_type(libvgcode::EViewType type) +{ + auto it = std::find(view_type_items.begin(), view_type_items.end(), type); + m_view_type_sel = (it != view_type_items.end()) ? static_cast(std::distance(view_type_items.begin(), it)) : 0; + set_view_type(type); +} + +// ORCA: Pick the view type the preview opens with, following the "preview_default_view_type" preference: +// a fixed view type, the one the user picked last ("last"), or the automatic choice ("auto", the default) +// which shows Filament for multi material prints and Line Type for single material ones. +// The default is only (re)applied when it actually changes, so a view type picked by hand survives a reslice. +void GCodeViewer::apply_default_view_type() +{ + const std::string preference = wxGetApp().app_config->get("preview_default_view_type"); + + std::string key = preference; + libvgcode::EViewType type = libvgcode::EViewType::FeatureType; + if (preference == "last") { + if (!view_type_from_config_name(wxGetApp().app_config->get("preview_last_view_type"), type)) + type = libvgcode::EViewType::FeatureType; + } + else if (!view_type_from_config_name(preference, type)) { + // "auto", or an unknown value written by a newer version + const bool multi_material = m_viewer.get_used_extruders_count() > 1; + type = multi_material ? libvgcode::EViewType::ColorPrint : libvgcode::EViewType::FeatureType; + key = multi_material ? "auto_multi_material" : "auto_single_material"; + } + + if (m_applied_default_view_type_key == key) + return; + + m_applied_default_view_type_key = key; + select_view_type(type); +} + void GCodeViewer::update_by_mode(ConfigOptionMode mode) { view_type_items.clear(); @@ -1353,6 +1443,7 @@ void GCodeViewer::load_as_gcode(const GCodeProcessorResult& gcode_result, const libvgcode::EGCodeExtrusionRole::SupportTransition, libvgcode::EGCodeExtrusionRole::Mixed }); m_paths_bounding_box = BoundingBoxf3(libvgcode::convert(bbox[0]).cast(), libvgcode::convert(bbox[1]).cast()); + m_max_bounding_box = m_paths_bounding_box; if (wxGetApp().is_editor()) m_contained_in_bed = wxGetApp().plater()->build_volume().all_paths_inside(gcode_result, m_paths_bounding_box); @@ -1395,27 +1486,8 @@ void GCodeViewer::load_as_gcode(const GCodeProcessorResult& gcode_result, const // load_toolpaths(gcode_result, build_volume, exclude_bounding_box); - // ORCA: Apply smart default view type when extruder count changes. - // Multi-color: ColorPrint (Filament), Single-color: FeatureType (Line Type). - // User selections persist within same extruder count, defaults reapply on count change. - int current_count = m_viewer.get_used_extruders_count(); - if (current_count > 1) { - if (m_last_extruder_count_default_applied != 2) { - auto it = std::find(view_type_items.begin(), view_type_items.end(), libvgcode::EViewType::ColorPrint); - if (it != view_type_items.end()) - m_view_type_sel = std::distance(view_type_items.begin(), it); - set_view_type(libvgcode::EViewType::ColorPrint); - m_last_extruder_count_default_applied = 2; - } - } else { - if (m_last_extruder_count_default_applied != 1) { - auto it = std::find(view_type_items.begin(), view_type_items.end(), libvgcode::EViewType::FeatureType); - if (it != view_type_items.end()) - m_view_type_sel = std::distance(view_type_items.begin(), it); - set_view_type(libvgcode::EViewType::FeatureType); - m_last_extruder_count_default_applied = 1; - } - } + // ORCA: Apply the default view type now that we know how many tools the G-code actually uses. + apply_default_view_type(); // BBS: data for rendering color arrangement recommendation m_nozzle_nums = print.config().option("nozzle_diameter")->values.size(); @@ -1627,7 +1699,7 @@ void GCodeViewer::render_scene(int canvas_width, int canvas_height) glsafe(::glEnable(GL_DEPTH_TEST)); render_shells(canvas_width, canvas_height); - if (m_viewer.get_extrusion_roles().empty()) + if (m_viewer.get_extrusion_roles_count() == 0) return; render_toolpaths(); @@ -1641,6 +1713,29 @@ void GCodeViewer::render_scene(int canvas_width, int canvas_height) m_sequential_view.render_marker(!m_no_render_path, canvas_width, sequential_view_height(canvas_height), m_viewer.get_view_type()); } +void GCodeViewer::render_shadow_casters(const Transform3d& light_view_matrix, const Transform3d& light_projection_matrix, const Vec3d& light_position) +{ + if (!has_data()) + return; + + m_viewer.render_shadow_casters( + libvgcode::convert(static_cast(light_view_matrix.matrix().cast())), + libvgcode::convert(static_cast(light_projection_matrix.matrix().cast())), + libvgcode::convert(static_cast(light_position.cast()))); +} + +void GCodeViewer::set_shadow_map(int texture_unit, const Transform3d& light_view_projection, float intensity, float texel_size) +{ + m_viewer.set_shadow_map(texture_unit, + libvgcode::convert(static_cast(light_view_projection.matrix().cast())), + intensity, texel_size); +} + +void GCodeViewer::set_tone(float exposure, float saturation) +{ + m_viewer.set_tone(exposure, saturation); +} + void GCodeViewer::render_overlay(int canvas_width, int canvas_height, int right_margin) { if (m_viewer.get_extrusion_roles().empty()) @@ -3426,6 +3521,12 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv std::vector>> ret; ret.reserve(custom_gcode_per_print_z.size()); + // Loop invariant, but built lazily: this lambda runs once per extruder on every frame + // and most prints reach neither colour change below, so fetching it up front would cost + // more than the per-item fetch it replaces. + std::vector zs; + bool zs_built = false; + for (const auto& item : custom_gcode_per_print_z) { if (extruder_id + 1 != static_cast(item.extruder)) continue; @@ -3433,7 +3534,10 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv if (item.type != ColorChange) continue; - const std::vector zs = m_viewer.get_layers_zs(); + if (!zs_built) { + zs = m_viewer.get_layers_zs(); + zs_built = true; + } auto lower_b = std::lower_bound(zs.begin(), zs.end(), static_cast(item.print_z - epsilon())); if (lower_b == zs.end()) @@ -3558,6 +3662,10 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv m_view_type_sel = i; set_view_type(view_type_items[m_view_type_sel]); reset_visible(view_type_items[m_view_type_sel]); + // ORCA: remember the pick so the "Last used" preview default can restore it + const std::string view_type_name = view_type_to_config_name(view_type_items[m_view_type_sel]); + if (!view_type_name.empty()) + wxGetApp().app_config->set("preview_last_view_type", view_type_name); update_moves_slider(); #if ENABLE_ENHANCED_IMGUI_SLIDER_FLOAT imgui.set_requires_extra_frame(); @@ -4582,6 +4690,8 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv // ORCA: Get layer Zs as doubles std::vector layer_zs = get_layers_zs(); + // loop invariant, same reason as the layer Zs above + const std::vector layer_times = m_viewer.get_layers_estimated_times(); for (Slic3r::CustomGCode::Item custom_gcode : custom_gcode_per_print_z) { ImGui::Dummy({window_padding, window_padding}); @@ -4601,7 +4711,6 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv imgui.text(buf); ImGui::SameLine(max_len * 1.5); - std::vector layer_times = m_viewer.get_layers_estimated_times(); float custom_gcode_time = 0; if (layer > 0) { @@ -4650,7 +4759,7 @@ void GCodeViewer::render_legend(float &legend_height, int canvas_width, int canv std::string print_str = _u8L("Model printing time"); std::string total_str = _u8L("Total time"); float max_len = window_padding + 2 * ImGui::GetStyle().ItemSpacing.x; - if (m_viewer.get_layers_estimated_times().empty()) + if (m_viewer.get_layers_count() == 0) max_len += ImGui::CalcTextSize(total_str.c_str()).x; else { if (m_viewer.get_view_type() == libvgcode::EViewType::FeatureType) diff --git a/src/slic3r/GUI/GCodeViewer.hpp b/src/slic3r/GUI/GCodeViewer.hpp index 9b82a81b2f..f4ebe2e81d 100644 --- a/src/slic3r/GUI/GCodeViewer.hpp +++ b/src/slic3r/GUI/GCodeViewer.hpp @@ -228,7 +228,8 @@ private: std::vector view_type_items; std::vector view_type_items_str; int m_view_type_sel = 0; - int m_last_extruder_count_default_applied{0}; // 0=unset, 1=single, 2+=multi + // ORCA: which default view type was last applied, see apply_default_view_type(). Empty until the first one is applied. + std::string m_applied_default_view_type_key; std::vector options_items; bool m_legend_visible{ true }; @@ -279,6 +280,13 @@ public: void render_scene(int canvas_width, int canvas_height); // Legend, sliders, the marker's position window and the G-code window, all ImGui. void render_overlay(int canvas_width, int canvas_height, int right_margin); + // ORCA: realistic view. Depth-only pass drawing the toolpaths as the light sees them, into + // the shadow map the caller has bound, and the map they sample back in render_scene. + void render_shadow_casters(const Transform3d& light_view_matrix, const Transform3d& light_projection_matrix, const Vec3d& light_position); + void set_shadow_map(int texture_unit, const Transform3d& light_view_projection, float intensity, float texel_size); + // ORCA: tone applied to the shaded toolpaths, paying back the light the lighting term, + // the shadow and the SSAO pass each take off. 1.0/1.0 is a no-op. + void set_tone(float exposure, float saturation); //BBS // void _render_calibration_thumbnail_internal(ThumbnailData& thumbnail_data, const ThumbnailsParams& thumbnail_params, PartPlateList& partplate_list, OpenGLManager& opengl_manager); // void _render_calibration_thumbnail_framebuffer(ThumbnailData& thumbnail_data, unsigned int w, unsigned int h, const ThumbnailsParams& thumbnail_params, PartPlateList& partplate_list, OpenGLManager& opengl_manager); @@ -324,6 +332,16 @@ public: void set_view_type(libvgcode::EViewType type) { m_viewer.set_view_type(type); } + // ORCA: select a view type in the preview combo box and apply it + void select_view_type(libvgcode::EViewType type); + // ORCA: apply the "preview_default_view_type" preference, see the definition for the supported values + void apply_default_view_type(); + + // ORCA: stable, locale independent name of a view type, as stored in the application config + static std::string view_type_to_config_name(libvgcode::EViewType type); + static bool view_type_from_config_name(const std::string& name, libvgcode::EViewType& type); + // ORCA: (config value, translated label) pairs for the "preview_default_view_type" preference combo box + static std::vector> default_view_type_choices(); void reset_visible(libvgcode::EViewType type) { if (type == libvgcode::EViewType::FeatureType) { auto roles = m_viewer.get_extrusion_roles(); diff --git a/src/slic3r/GUI/GLCanvas3D.cpp b/src/slic3r/GUI/GLCanvas3D.cpp index 190eeedbb4..ffa067308c 100644 --- a/src/slic3r/GUI/GLCanvas3D.cpp +++ b/src/slic3r/GUI/GLCanvas3D.cpp @@ -20,6 +20,7 @@ #include "libslic3r/AppConfig.hpp" #include "3DScene.hpp" #include "BackgroundSlicingProcess.hpp" +#include "CameraUtils.hpp" #include "GLShader.hpp" #include "GUI.hpp" #include "Tab.hpp" @@ -43,6 +44,7 @@ #include "slic3r/GUI/Gizmos/GLGizmoPainterBase.hpp" #include "slic3r/Utils/UndoRedo.hpp" #include "slic3r/Utils/MacDarkMode.hpp" +#include "slic3r/plugin/PluginManager.hpp" #include @@ -116,6 +118,36 @@ void GLCanvas3D::load_render_colors() namespace Slic3r { namespace GUI { +static void pan_camera(Camera& camera, const Vec2d& screen_delta, const Vec3d& anchor) +{ + // Orca: Derive world-units-per-pixel from the projection which produced the visible frame. + // Perspective additionally scales with the eye-space depth of the point being dragged. + const auto& viewport = camera.get_viewport(); + const auto& projection = camera.get_projection_matrix().matrix(); + const double depth_scale = camera.get_type() == Camera::EType::Perspective ? + (anchor - camera.get_position()).dot(camera.get_dir_forward()) : 1.0; + const double projection_x = projection(0, 0) * viewport[2]; + const double projection_y = projection(1, 1) * viewport[3]; + + // Orca: X/Y projection coefficients already include zoom. Using them directly avoids a + // project/unproject round-trip through window depth, whose precision depends on the scene frustum. + if (viewport[2] > 0 && viewport[3] > 0 && anchor.allFinite() && depth_scale > EPSILON && + std::abs(projection_x) > EPSILON && std::abs(projection_y) > EPSILON) { + const Vec3d displacement = 2.0 * depth_scale * + (screen_delta.y() / projection_y * camera.get_dir_up() - + screen_delta.x() / projection_x * camera.get_dir_right()); + if (displacement.allFinite()) { + camera.translate(displacement); + return; + } + } + + // Orca: Preserve the former target-plane behavior if the projection or anchor is invalid. + // Screen Y grows downward, and the camera moves opposite to the drag. + camera.translate(camera.get_inv_zoom() * + (screen_delta.y() * camera.get_dir_up() - screen_delta.x() * camera.get_dir_right())); +} + #ifdef __WXGTK3__ // wxGTK3 seems to simulate OSX behavior in regard to HiDPI scaling support. RetinaHelper::RetinaHelper(wxWindow* window) : m_window(window), m_self(nullptr) {} @@ -1056,8 +1088,6 @@ wxDEFINE_EVENT(EVT_GLCANVAS_MOUSE_DRAGGING_FINISHED, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_UPDATE_BED_SHAPE, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_TAB, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_RESETGIZMOS, SimpleEvent); -wxDEFINE_EVENT(EVT_GLCANVAS_MOVE_SLIDERS, wxKeyEvent); -wxDEFINE_EVENT(EVT_GLCANVAS_JUMP_TO, wxKeyEvent); wxDEFINE_EVENT(EVT_GLCANVAS_UNDO, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_REDO, SimpleEvent); wxDEFINE_EVENT(EVT_GLCANVAS_SWITCH_TO_OBJECT, SimpleEvent); @@ -2199,21 +2229,20 @@ void GLCanvas3D::_render_scene(const Camera& camera, const Size& cnv_size) // Recorded by PartPlate::render_icons() below, when it runs. wxGetApp().plater()->get_partplate_list().clear_hover_tooltip(); glsafe(::glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT)); - // Invalidate the shadow map each frame; only the View3D path below rebuilds it. This keeps - // the Preview / Assemble canvases from sampling a stale map with an outdated light matrix. + // Invalidate the shadow map each frame; the View3D and Preview paths below rebuild it. This + // keeps the Assemble canvas from sampling a stale map with an outdated light matrix. m_shadow_map_valid = false; _render_background(); //BBS add partplater rendering logic - bool only_current = false, only_body = false, no_partplate = false; + bool only_current = false, only_body = false; + const bool show_bed = is_bed_visible(); bool show_grid = true; GLGizmosManager::EType gizmo_type = m_gizmos.get_current_type(); if (!m_main_toolbar.is_enabled()) { //only_body = true; only_current = true; } - else if ((gizmo_type == GLGizmosManager::FdmSupports) || (gizmo_type == GLGizmosManager::Seam) || (gizmo_type == GLGizmosManager::MmSegmentation) || (gizmo_type == GLGizmosManager::FuzzySkin)) - no_partplate = true; else if (gizmo_type == GLGizmosManager::BrimEars && !camera.is_looking_downward()) show_grid = false; if (m_axes_at_bed_center) @@ -2227,11 +2256,11 @@ void GLCanvas3D::_render_scene(const Camera& camera, const Size& cnv_size) if (m_canvas_type == ECanvasType::CanvasView3D) { // m_show_bed gates the plate list too: hiding the bed but leaving its grid and outline // floating would read as a rendering fault rather than a deliberate view option. - if (!no_partplate && m_show_bed) + if (show_bed) _render_bed(camera.get_view_matrix(), camera.get_projection_matrix(), !camera.is_looking_downward(), m_show_world_axes); - if (!no_partplate && m_show_bed) //BBS: add outline logic + if (show_bed) //BBS: add outline logic _render_platelist(camera.get_view_matrix(), camera.get_projection_matrix(), !camera.is_looking_downward(), only_current, only_body, hover_id, true, show_grid); - if (m_axes_at_bed_center && m_show_bed && !no_partplate) + if (m_axes_at_bed_center && show_bed) // Design tab: replace the plate's corner-origin grid with the origin-centred CAD grid. _render_cad_grid(camera.get_view_matrix(), camera.get_projection_matrix()); @@ -2251,6 +2280,8 @@ void GLCanvas3D::_render_scene(const Camera& camera, const Size& cnv_size) _render_selection(); _render_bed(camera.get_view_matrix(), camera.get_projection_matrix(), !camera.is_looking_downward(), m_show_world_axes); _render_platelist(camera.get_view_matrix(), camera.get_projection_matrix(), !camera.is_looking_downward(), only_current, true, hover_id); + // Realistic view: the print casts a shadow onto the plate here as it does in View3D. + _render_shadows(camera.get_view_matrix(), camera.get_projection_matrix()); // BBS: GUI refactor: add canvas size as parameters _render_gcode(cnv_size.get_width(), cnv_size.get_height()); } @@ -2321,6 +2352,13 @@ void GLCanvas3D::render_thumbnail(ThumbnailData & thumbnail_data, render_thumbnail(thumbnail_data, w, h, thumbnail_params, model_objects, m_volumes, camera_type, camera_view_angle_type, for_picking, ban_light); } +bool GLCanvas3D::_set_shown_canvas_current() +{ + // Thumbnails also render outside render(), where another library's GL context (e.g. WebKitGTK's) can be current. + // Inside render(), the shown canvas is the one already bound. + return wxGetApp().plater()->get_current_canvas3D()->_set_current(); +} + void GLCanvas3D::render_thumbnail(ThumbnailData & thumbnail_data, unsigned int w, unsigned int h, @@ -2332,6 +2370,9 @@ void GLCanvas3D::render_thumbnail(ThumbnailData & thumbnail_data, bool for_picking, bool ban_light) { + if (!_set_shown_canvas_current()) + return; + GLShaderProgram* shader = nullptr; if (for_picking) shader = wxGetApp().get_shader("flat"); @@ -2370,6 +2411,9 @@ void GLCanvas3D::render_thumbnail(ThumbnailData & thumbnail_d bool for_picking, bool ban_light) { + if (!_set_shown_canvas_current()) + return; + GLShaderProgram *shader = wxGetApp().get_shader("thumbnail"); switch (OpenGLManager::get_framebuffers_type()) { case OpenGLManager::EFramebufferType::Arb: { @@ -3278,6 +3322,9 @@ void GLCanvas3D::unbind_event_handlers() m_canvas->Unbind(wxEVT_GESTURE_PAN, &GLCanvas3D::on_gesture, this); m_canvas->Unbind(wxEVT_GESTURE_ZOOM, &GLCanvas3D::on_gesture, this); m_canvas->Unbind(wxEVT_GESTURE_ROTATE, &GLCanvas3D::on_gesture, this); +#if __WXOSX__ + initGestures(m_canvas->GetHandle(), nullptr); +#endif } } @@ -4026,27 +4073,38 @@ void GLCanvas3D::on_gesture(wxGestureEvent &evt) auto & camera = wxGetApp().plater()->get_camera(); if (evt.GetEventType() == wxEVT_GESTURE_PAN) { - auto p = evt.GetPosition(); + // Orca: Gesture coordinates must use framebuffer pixels, and one stable world-space + // anchor must be retained for the complete gesture to prevent perspective drift. + const auto p = evt.GetPosition(); auto d = static_cast(evt).GetDelta(); - float z = 0; - const Vec3d &p2 = _mouse_to_3d({p.x, p.y}, &z); - const Vec3d &p1 = _mouse_to_3d({p.x - d.x, p.y - d.y}, &z); - camera.set_target(camera.get_target() + p1 - p2); + Vec2d screen_position(p.x, p.y); + Vec2d screen_delta(d.x, d.y); + apply_retina_scale(screen_position); + apply_retina_scale(screen_delta); + if (evt.IsGestureStart() || !m_gesture_pan_anchor.has_value()) + m_gesture_pan_anchor = get_camera_pan_anchor(camera, ECameraNavigationType::Gesture, + screen_position - screen_delta); + pan_camera(camera, screen_delta, *m_gesture_pan_anchor); + if (evt.IsGestureEnd()) + m_gesture_pan_anchor.reset(); } else if (evt.GetEventType() == wxEVT_GESTURE_ZOOM) { static float zoom_start = 1; if (evt.IsGestureStart()) zoom_start = camera.get_zoom(); camera.set_zoom(zoom_start * static_cast(evt).GetZoomFactor()); } else if (evt.GetEventType() == wxEVT_GESTURE_ROTATE) { - PartPlate* plate = wxGetApp().plater()->get_partplate_list().get_curr_plate(); + // Orca: Rotation starts a different navigation operation, so a previous pan anchor + // must not be reused; rotation and pan fallbacks share the same navigation pivot. + m_gesture_pan_anchor.reset(); bool rotate_limit = current_printer_technology() != ptSLA; static double last_rotate = 0; if (evt.IsGestureStart()) last_rotate = 0; auto rotate = static_cast(evt).GetRotationAngle() - last_rotate; last_rotate += rotate; - if (plate) - camera.rotate_on_sphere_with_target(-rotate, 0, rotate_limit, plate->get_bounding_box().center()); + const std::optional rotate_target = get_camera_orbit_target(ECameraNavigationType::Gesture); + if (rotate_target.has_value()) + camera.rotate_on_sphere_with_target(-rotate, 0, rotate_limit, *rotate_target); else camera.rotate_on_sphere(-rotate, 0, rotate_limit); camera.auto_type(Camera::EType::Perspective); @@ -4336,6 +4394,10 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) post_event(SimpleEvent(EVT_GLCANVAS_SWITCH_TO_GLOBAL)); } else if (evt.LeftDown() || evt.RightDown() || evt.MiddleDown()) { + // Orca: Retain the click position even if the first motion event crosses a surface edge. + m_mouse.set_start_position_2D_as_invalid(); + m_mouse.drag.start_position_2D = pos; + //BBS: add orient deactivate logic if (!m_gizmos.on_mouse(evt)) { if (_deactivate_arrange_menu() || _deactivate_orient_menu()) @@ -4529,6 +4591,9 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) } // do not process the dragging if the left mouse was set down in another canvas else if (is_camera_rotate(evt, button_mappings)) { + // Orca: Rotation and panning use different drag coordinates and cached anchors. + // Clear the pan state before processing rotation or switching buttons mid-drag. + m_mouse.set_start_position_2D_as_invalid(); if (!has_mouse_capture()) // ORCA keep tracking mouse position while drag active and cursor not in window bounds m_canvas->CaptureMouse(); @@ -4546,12 +4611,12 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) if (this->m_canvas_type == ECanvasType::CanvasAssembleView || m_gizmos.get_current_type() == GLGizmosManager::FdmSupports || m_gizmos.get_current_type() == GLGizmosManager::Seam || m_gizmos.get_current_type() == GLGizmosManager::MmSegmentation || m_gizmos.get_current_type() == GLGizmosManager::FuzzySkin) { - Vec3d rotate_target = Vec3d::Zero(); - if (!m_selection.is_empty()) - rotate_target = m_selection.get_bounding_box().center(); + // Orca: Reuse the centralized pivot policy for scene-oriented tools. + const std::optional rotate_target = get_camera_orbit_target(ECameraNavigationType::Mouse); + if (rotate_target.has_value()) + camera.rotate_on_sphere_with_target(rot.x(), rot.y(), false, *rotate_target); else - rotate_target = volumes_bounding_box().center(); - camera.rotate_on_sphere_with_target(rot.x(), rot.y(), false, rotate_target); + camera.rotate_on_sphere(rot.x(), rot.y(), false); } else { if (wxGetApp().app_config->get_bool("use_free_camera")) @@ -4575,28 +4640,11 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) } camera.rotate_on_sphere_with_target(rot.x(), rot.y(), rotate_limit, m_rotation_center); } else { - Vec3d rotate_target = Vec3d::Zero(); - if (m_canvas_type == ECanvasType::CanvasPreview) { - PartPlate *plate = wxGetApp().plater()->get_partplate_list().get_curr_plate(); - if (plate) - rotate_target = plate->get_bounding_box().center(); - } - else { - if (!m_selection.is_empty()) - rotate_target = m_selection.get_bounding_box().center(); - else { - // Rotate around the center of objects on current plate - auto bbox = volumes_bounding_box(true); - if (!bbox.defined) { - // Rotate around current plate center if current plate is empty - bbox = wxGetApp().plater()->get_partplate_list().get_curr_plate()->get_bounding_box(); - } - rotate_target = bbox.center(); - } - } - - if (!rotate_target.isZero()) - camera.rotate_on_sphere_with_target(rot.x(), rot.y(), rotate_limit, rotate_target); + // Orca: Keep regular mouse orbit and perspective-pan fallback centered + // on the same selection, active-plate, or scene reference. + const std::optional rotate_target = get_camera_orbit_target(ECameraNavigationType::Mouse); + if (rotate_target.has_value()) + camera.rotate_on_sphere_with_target(rot.x(), rot.y(), rotate_limit, *rotate_target); else camera.rotate_on_sphere(rot.x(), rot.y(), rotate_limit); } @@ -4612,16 +4660,14 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) m_mouse.drag.start_position_3D = Vec3d((double)pos(0), (double)pos(1), 0.0); } else if (is_camera_pan(evt, button_mappings)) { + // Orca: Pan uses screen coordinates and must not inherit the rotation start point. + m_mouse.set_start_position_3D_as_invalid(); if (!has_mouse_capture()) // ORCA keep tracking mouse position while drag active and cursor not in window bounds m_canvas->CaptureMouse(); // if dragging with right button or if button functions swapped and dragging with left button over blank area then pan if (m_mouse.is_start_position_2D_defined()) { - // get point in model space at Z = 0 - float z = 0.0f; - const Vec3d& cur_pos = _mouse_to_3d(pos, &z); - Vec3d orig = _mouse_to_3d(m_mouse.drag.start_position_2D, &z); Camera& camera = wxGetApp().plater()->get_camera(); if (this->m_canvas_type != ECanvasType::CanvasAssembleView) { // Orca: Use a constrained camera when navigating the 3D scene with a regular mouse, if the free camera is not selected @@ -4633,7 +4679,14 @@ void GLCanvas3D::on_mouse(wxMouseEvent& evt) camera.recover_from_free_camera(); } - camera.set_target(camera.get_target() + orig - cur_pos); + // Orca: Cache the surface under the initial click and apply every incremental + // cursor delta at that depth, so perspective zoom and camera angle stay exact. + const Vec2d screen_delta = + pos.cast() - m_mouse.drag.start_position_2D.cast(); + if (!m_mouse.drag.camera_pan_anchor.has_value()) + m_mouse.drag.camera_pan_anchor = get_camera_pan_anchor(camera, ECameraNavigationType::Mouse, + m_mouse.drag.start_position_2D.cast()); + pan_camera(camera, screen_delta, *m_mouse.drag.camera_pan_anchor); m_dirty = true; m_mouse.ignore_right_up = true; // will be reset on button up event even if not right button is pressed } @@ -5026,8 +5079,16 @@ void GLCanvas3D::do_move(const std::string& snapshot_type) //BBS: nofity object list to update wxGetApp().plater()->sidebar().obj_list()->update_plate_values_for_items(); - if (object_moved) + if (object_moved) { + Slic3r::LifecycleEventContext ctx; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + ctx.msg = "moved"; + if (done.size() == 1) + ctx.name = m_model->objects[done.begin()->first]->name; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectTransformed, ctx); + post_event(SimpleEvent(EVT_GLCANVAS_INSTANCE_MOVED)); + } // BBS: support wipe-tower for multi-plates for (int plate_id = 0; plate_id < wipe_tower_origins.size(); plate_id++) { @@ -5148,8 +5209,16 @@ void GLCanvas3D::do_rotate(const std::string& snapshot_type) //BBS: nofity object list to update wxGetApp().plater()->sidebar().obj_list()->update_plate_values_for_items(); - if (!done.empty()) + if (!done.empty()) { + Slic3r::LifecycleEventContext ctx; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + ctx.msg = "rotated"; + if (done.size() == 1) + ctx.name = m_model->objects[done.begin()->first]->name; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectTransformed, ctx); + post_event(SimpleEvent(EVT_GLCANVAS_INSTANCE_ROTATED)); + } m_dirty = true; } @@ -5240,8 +5309,16 @@ void GLCanvas3D::do_scale(const std::string& snapshot_type) //BBS: notify object info update wxGetApp().plater()->show_object_info(); - if (!done.empty()) + if (!done.empty()) { + Slic3r::LifecycleEventContext ctx; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + ctx.msg = "scaled"; + if (done.size() == 1) + ctx.name = m_model->objects[done.begin()->first]->name; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectTransformed, ctx); + post_event(SimpleEvent(EVT_GLCANVAS_INSTANCE_SCALED)); + } m_dirty = true; } @@ -7204,6 +7281,16 @@ void GLCanvas3D::_resize(unsigned int w, unsigned int h) m_last_w = w; m_last_h = h; + set_imgui_scaling(); + + this->request_extra_frame(); + + // ensures that this canvas is current + _set_current(); +} + +void GLCanvas3D::set_imgui_scaling() +{ float font_size = wxGetApp().em_unit(); #ifdef _WIN32 @@ -7216,15 +7303,10 @@ void GLCanvas3D::_resize(unsigned int w, unsigned int h) #endif #if ENABLE_RETINA_GL - imgui->set_scaling(font_size, 1.0f, m_retina_helper->get_scale_factor()); + wxGetApp().imgui()->set_scaling(font_size, 1.0f, m_retina_helper->get_scale_factor()); #else - imgui->set_scaling(font_size, m_canvas->GetContentScaleFactor(), 1.0f); + wxGetApp().imgui()->set_scaling(font_size, m_canvas->GetContentScaleFactor(), 1.0f); #endif - - this->request_extra_frame(); - - // ensures that this canvas is current - _set_current(); } BoundingBoxf3 GLCanvas3D::_max_bounding_box(bool include_gizmos, bool include_bed_model, bool include_plates) const @@ -7302,11 +7384,8 @@ void GLCanvas3D::_picking_pass() m_hover_volume_idxs.clear(); m_hover_plate_idxs.clear(); - // Orca: ignore clipping plane if not applying - GLGizmoBase *current_gizmo = m_gizmos.get_current(); - const ClippingPlane clipping_plane = ((!current_gizmo || current_gizmo->apply_clipping_plane()) ? m_gizmos.get_clipping_plane() : - ClippingPlane::ClipsNothing()) - .inverted_normal(); + // Orca: Picking and camera navigation must interpret the active gizmo clipping plane identically. + const ClippingPlane clipping_plane = get_raycaster_clipping_plane(); const SceneRaycaster::HitResult hit = m_scene_raycaster.hit(m_mouse.position, wxGetApp().plater()->get_camera(), &clipping_plane); if (hit.is_valid()) { switch (hit.type) @@ -7644,11 +7723,20 @@ bool GLCanvas3D::_is_fxaa_enabled() const return wxGetApp().app_config != nullptr && wxGetApp().app_config->get_bool(SETTING_OPENGL_FXAA_ENABLED); } +bool GLCanvas3D::_is_realistic_view_enabled() const +{ + const AppConfig* cfg = wxGetApp().app_config; + if (cfg == nullptr || !cfg->get_bool(SETTING_OPENGL_REALISTIC_MODE)) + return false; + // Prepare and Assemble follow the umbrella toggle alone; Preview needs its own opt-in. + return m_canvas_type != ECanvasType::CanvasPreview || cfg->get_bool(SETTING_OPENGL_REALISTIC_PREVIEW); +} + bool GLCanvas3D::_is_ssao_enabled() const { if (wxGetApp().app_config == nullptr) return false; - return wxGetApp().app_config->get_bool(SETTING_OPENGL_REALISTIC_MODE) && + return _is_realistic_view_enabled() && wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_SSAO); } @@ -7803,95 +7891,23 @@ void GLCanvas3D::_render_ssao_pass(unsigned int width, unsigned int height) const Camera& camera = wxGetApp().plater()->get_camera(); - GLint prev_stencil_mask = 0xFF; - glsafe(::glGetIntegerv(GL_STENCIL_WRITEMASK, &prev_stencil_mask)); - GLboolean prev_stencil_test = GL_FALSE; - glsafe(::glGetBooleanv(GL_STENCIL_TEST, &prev_stencil_test)); - GLboolean prev_depth_mask = GL_TRUE; - glsafe(::glGetBooleanv(GL_DEPTH_WRITEMASK, &prev_depth_mask)); - GLint prev_depth_func = GL_LESS; - glsafe(::glGetIntegerv(GL_DEPTH_FUNC, &prev_depth_func)); - glsafe(::glDisable(GL_DEPTH_TEST)); glsafe(::glDisable(GL_BLEND)); - // Build stencil mask for bed/plate and apply SSAO only outside this mask. - glsafe(::glEnable(GL_STENCIL_TEST)); - glsafe(::glStencilMask(0xFF)); - glsafe(::glClearStencil(0)); - glsafe(::glClear(GL_STENCIL_BUFFER_BIT)); - glsafe(::glStencilFunc(GL_ALWAYS, 1, 0xFF)); - glsafe(::glStencilOp(GL_KEEP, GL_KEEP, GL_REPLACE)); - // Mark only visible plate pixels (do not exclude objects in front of plate). - glsafe(::glEnable(GL_DEPTH_TEST)); - glsafe(::glDepthMask(GL_FALSE)); - glsafe(::glDepthFunc(GL_LEQUAL)); - - GLboolean prev_color_mask[4] = { GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE }; - glsafe(::glGetBooleanv(GL_COLOR_WRITEMASK, prev_color_mask)); - glsafe(::glColorMask(GL_FALSE, GL_FALSE, GL_FALSE, GL_FALSE)); - - if (const BuildVolume& build_volume = m_bed.build_volume(); build_volume.valid()) { - GLShaderProgram* flat = wxGetApp().get_shader("flat"); - if (flat != nullptr) { - flat->start_using(); - flat->set_uniform("projection_matrix", camera.get_projection_matrix()); - - GLModel plate_mask; - GLModel::Geometry mask; - mask.format = { GLModel::Geometry::EPrimitiveType::Triangles, GLModel::Geometry::EVertexLayout::P3 }; - - if (build_volume.type() == BuildVolume_Type::Rectangle) { - const BoundingBox3Base bb = build_volume.bounding_volume(); - mask.reserve_vertices(4); - mask.reserve_indices(6); - mask.add_vertex(Vec3f((float)bb.min.x(), (float)bb.min.y(), 0.0f)); - mask.add_vertex(Vec3f((float)bb.max.x(), (float)bb.min.y(), 0.0f)); - mask.add_vertex(Vec3f((float)bb.max.x(), (float)bb.max.y(), 0.0f)); - mask.add_vertex(Vec3f((float)bb.min.x(), (float)bb.max.y(), 0.0f)); - mask.add_triangle(0, 1, 2); - mask.add_triangle(0, 2, 3); - } else if (build_volume.type() == BuildVolume_Type::Circle) { - const Vec2f c = Vec2f(unscaled(build_volume.circle().center.x()), unscaled(build_volume.circle().center.y())); - const float r = unscaled(build_volume.circle().radius); - const int segments = 64; - mask.reserve_vertices(segments + 1); - mask.reserve_indices(segments * 3); - mask.add_vertex(Vec3f(c.x(), c.y(), 0.0f)); - for (int i = 0; i < segments; ++i) { - const float a = (2.0f * float(PI) * float(i)) / float(segments); - mask.add_vertex(Vec3f(c.x() + r * std::cos(a), c.y() + r * std::sin(a), 0.0f)); - } - for (int i = 0; i < segments; ++i) { - const unsigned int i1 = 1 + i; - const unsigned int i2 = 1 + ((i + 1) % segments); - mask.add_triangle(0, i1, i2); - } - } - - if (mask.vertices_count() > 0 && mask.indices_count() > 0) { - plate_mask.init_from(std::move(mask)); - flat->set_uniform("view_model_matrix", camera.get_view_matrix()); - plate_mask.render(flat); - } - flat->stop_using(); - } - } - - glsafe(::glColorMask(GL_TRUE, GL_TRUE, GL_TRUE, GL_TRUE)); - glsafe(::glDisable(GL_DEPTH_TEST)); - glsafe(::glStencilMask(0x00)); - glsafe(::glStencilFunc(GL_NOTEQUAL, 1, 0xFF)); - glsafe(::glStencilOp(GL_KEEP, GL_KEEP, GL_KEEP)); - shader->start_using(); shader->set_uniform("view_model_matrix", Transform3d::Identity()); shader->set_uniform("projection_matrix", Transform3d::Identity()); shader->set_uniform("color_texture", 0); shader->set_uniform("depth_texture", 1); shader->set_uniform("inv_tex_size", Vec2f(1.0f / static_cast(width), 1.0f / static_cast(height))); - shader->set_uniform("z_near", camera.get_near_z()); shader->set_uniform("z_far", camera.get_far_z()); + // The shader reconstructs the surface normal from the depth buffer, there being no normal + // target to read: it unprojects a pixel back into view space, then measures the result + // against world +Z expressed in view space to tell a top surface from a wall. + const Matrix4d inv_projection_matrix = camera.get_projection_matrix().matrix().inverse(); + shader->set_uniform("inv_projection_matrix", inv_projection_matrix); + const Vec3d up_view = (camera.get_view_matrix().matrix().block<3, 3>(0, 0) * Vec3d::UnitZ()).normalized(); + shader->set_uniform("up_view", up_view); glsafe(::glActiveTexture(GL_TEXTURE0)); glsafe(::glBindTexture(GL_TEXTURE_2D, m_ssao_color_texture_id)); @@ -7903,13 +7919,6 @@ void GLCanvas3D::_render_ssao_pass(unsigned int width, unsigned int height) glsafe(::glBindTexture(GL_TEXTURE_2D, 0)); shader->stop_using(); - if (!prev_stencil_test) - glsafe(::glDisable(GL_STENCIL_TEST)); - glsafe(::glStencilMask(prev_stencil_mask)); - glsafe(::glColorMask(prev_color_mask[0], prev_color_mask[1], prev_color_mask[2], prev_color_mask[3])); - - glsafe(::glDepthMask(prev_depth_mask)); - glsafe(::glDepthFunc(prev_depth_func)); glsafe(::glEnable(GL_DEPTH_TEST)); glsafe(::glEnable(GL_BLEND)); glsafe(::glBlendFunc(GL_SRC_ALPHA, GL_ONE_MINUS_SRC_ALPHA)); @@ -8154,15 +8163,19 @@ void GLCanvas3D::_render_shadows(const Transform3d& view_matrix, const Transform { if (wxGetApp().app_config == nullptr) return; - if (!wxGetApp().app_config->get_bool(SETTING_OPENGL_REALISTIC_MODE)) + if (!_is_realistic_view_enabled()) return; if (!wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_BASIC_PLATE_SHADOWS)) return; - if (m_volumes.empty()) - return; - GLShaderProgram* shader = wxGetApp().get_shader("flat"); - if (shader == nullptr) + // The preview canvas holds no volumes of its own for FFF. Once slicing has run its printed + // geometry is the G-code toolpaths, which both cast into the map here and sample it back in + // _render_gcode; before slicing there are only shells, and nothing casts at all. View3D and + // SLA preview use m_volumes. The shells are deliberately never casters: they are a + // translucent ghost of the whole object, so they would drop the solid shadow of a print that + // has not been sliced, and at any layer below the last, one that is not there yet. + const bool toolpath_casters = m_canvas_type == ECanvasType::CanvasPreview && m_gcode_viewer.has_data(); + if (!toolpath_casters && m_volumes.empty()) return; if (OpenGLManager::get_framebuffers_type() == OpenGLManager::EFramebufferType::Arb) { @@ -8174,10 +8187,30 @@ void GLCanvas3D::_render_shadows(const Transform3d& view_matrix, const Transform // Bounding box of the printable objects (the shadow casters). BoundingBoxf3 obj_bb; - for (const GLVolume* volume : m_volumes.volumes) { - if (volume == nullptr || !volume->is_active || !volume->printable || volume->is_modifier || volume->is_wipe_tower) - continue; - obj_bb.merge(volume->transformed_bounding_box()); + if (toolpath_casters) { + // Merged corner by corner: BoundingBoxf3(min, max) marks itself undefined at zero + // Z extent, which a single layer print gives, and the check below would then drop + // every shadow in the frame. + const BoundingBoxf3& paths_bb = m_gcode_viewer.get_paths_bounding_box(); + if ((paths_bb.min.array() <= paths_bb.max.array()).all()) { + obj_bb.merge(paths_bb.min); + obj_bb.merge(paths_bb.max); + } + // Only the enabled layers are drawn, so fitting the map to the whole print wastes + // its depth range and makes contact shadows shift as the slider moves. The z = 0 + // shadow is enclosed separately below, so the plate shadow is unaffected. + const std::vector layer_zs = m_gcode_viewer.get_layers_zs(); + if (!layer_zs.empty()) { + const size_t top = std::min(m_gcode_viewer.get_layers_z_range()[1], layer_zs.size() - 1); + obj_bb.max.z() = std::max(obj_bb.min.z(), std::min(obj_bb.max.z(), layer_zs[top])); + } + } + else { + for (const GLVolume* volume : m_volumes.volumes) { + if (volume == nullptr || !volume->is_active || !volume->printable || volume->is_modifier || volume->is_wipe_tower) + continue; + obj_bb.merge(volume->transformed_bounding_box()); + } } if (!obj_bb.defined) return; // no objects to cast shadows @@ -8299,16 +8332,21 @@ void GLCanvas3D::_render_shadows(const Transform3d& view_matrix, const Transform glsafe(::glPolygonOffset(4.0f, 4.0f)); glsafe(::glDisable(GL_CULL_FACE)); - shader->start_using(); - shader->set_uniform("projection_matrix", Transform3d(light_proj)); - for (GLVolume* volume : m_volumes.volumes) { - if (volume == nullptr || !volume->is_active || !volume->printable || volume->is_modifier || volume->is_wipe_tower) - continue; - const Transform3d view_model = Transform3d(light_view) * volume->world_matrix(); - shader->set_uniform("view_model_matrix", view_model); - volume->model.render(shader); + if (toolpath_casters) + m_gcode_viewer.render_shadow_casters(Transform3d(light_view), Transform3d(light_proj), eye); + // Only this branch draws through "flat"; the toolpaths bring their own program. + else if (GLShaderProgram* shader = wxGetApp().get_shader("flat"); shader != nullptr) { + shader->start_using(); + shader->set_uniform("projection_matrix", Transform3d(light_proj)); + for (GLVolume* volume : m_volumes.volumes) { + if (volume == nullptr || !volume->is_active || !volume->printable || volume->is_modifier || volume->is_wipe_tower) + continue; + const Transform3d view_model = Transform3d(light_view) * volume->world_matrix(); + shader->set_uniform("view_model_matrix", view_model); + volume->model.render(shader); + } + shader->stop_using(); } - shader->stop_using(); // Restore state glsafe(::glDisable(GL_POLYGON_OFFSET_FILL)); @@ -8517,7 +8555,7 @@ void GLCanvas3D::_render_objects(GLVolumeCollection::ERenderType type, bool with return; } - const bool realistic_mode = wxGetApp().app_config != nullptr && wxGetApp().app_config->get_bool(SETTING_OPENGL_REALISTIC_MODE); + const bool realistic_mode = _is_realistic_view_enabled(); const bool realistic_phong = wxGetApp().app_config != nullptr && wxGetApp().app_config->get_bool(SETTING_OPENGL_REALISTIC_PHONG); const std::string shader_name = (realistic_mode && realistic_phong) ? "phong" : "gouraud"; GLShaderProgram* shader = wxGetApp().get_shader(shader_name); @@ -8741,7 +8779,34 @@ void GLCanvas3D::_render_wireframe_overlay() //BBS: GUI refactor: add canvas size as parameters void GLCanvas3D::_render_gcode(int canvas_width, int canvas_height) { + // Realistic view: the toolpaths receive the same depth map they were rendered into by + // _render_shadows, which is what gives them object-on-object and self shadows. Intensity 0 + // short-circuits the lookup in the shader, so this is inert whenever the map is missing. + const bool receive_shadows = m_shadow_map_valid && m_shadow_map_texture_id != 0 && m_shadow_map_size != 0; + if (receive_shadows) { + glsafe(::glActiveTexture(GL_TEXTURE4)); + glsafe(::glBindTexture(GL_TEXTURE_2D, m_shadow_map_texture_id)); + glsafe(::glActiveTexture(GL_TEXTURE0)); + m_gcode_viewer.set_shadow_map(4, m_shadow_light_vp, 0.35f, 1.0f / static_cast(m_shadow_map_size)); + } + else + m_gcode_viewer.set_shadow_map(4, Transform3d::Identity(), 0.0f, 0.0f); + + // The lighting term leaves the print dimmer and duller than the legend colours. Saturation + // pays back the duller half in both modes; brightness only where something takes light off + // again - realistic view with at least one lossy pass on - else the lift would just clip. + const AppConfig* cfg = wxGetApp().app_config; + const bool lossy_passes = cfg != nullptr && _is_realistic_view_enabled() && + (cfg->get_bool(SETTING_OPENGL_PHONG_BASIC_PLATE_SHADOWS) || cfg->get_bool(SETTING_OPENGL_PHONG_SSAO)); + m_gcode_viewer.set_tone(lossy_passes ? 1.1f : 1.0f, 1.15f); + m_gcode_viewer.render_scene(canvas_width, canvas_height); + + if (receive_shadows) { + glsafe(::glActiveTexture(GL_TEXTURE4)); + glsafe(::glBindTexture(GL_TEXTURE_2D, 0)); + glsafe(::glActiveTexture(GL_TEXTURE0)); + } } void GLCanvas3D::_render_gcode_overlay(int canvas_width, int canvas_height) @@ -9831,7 +9896,7 @@ void GLCanvas3D::_render_canvas_toolbar() ); create_menu_item( _utf8(L("Realistic View")), - m_canvas_type != ECanvasType::CanvasPreview, // not work on preview + true, // work on all cfg->get_bool(SETTING_OPENGL_REALISTIC_MODE), [&cfg]{ cfg->set_bool(SETTING_OPENGL_REALISTIC_MODE, !cfg->get_bool(SETTING_OPENGL_REALISTIC_MODE)); @@ -10614,6 +10679,129 @@ Vec3d GLCanvas3D::_mouse_to_bed_3d(const Point& mouse_pos) return mouse_ray(mouse_pos).intersect_plane(0.0); } +ClippingPlane GLCanvas3D::get_raycaster_clipping_plane() const +{ + // Orca: Ignore the gizmo clipping plane when the active tool does not apply it, and + // invert the result into the convention expected by SceneRaycaster. + GLGizmoBase* current_gizmo = m_gizmos.get_current(); + return ((!current_gizmo || current_gizmo->apply_clipping_plane()) ? m_gizmos.get_clipping_plane() : + ClippingPlane::ClipsNothing()) + .inverted_normal(); +} + +std::optional GLCanvas3D::get_camera_orbit_target(ECameraNavigationType navigation_type) const +{ + // Orca: Centralize the pre-existing pivot rules so orbiting and pan fallback cannot + // choose different reference depths for the same canvas and active tool. + PartPlate* current_plate = wxGetApp().plater()->get_partplate_list().get_curr_plate(); + if (navigation_type == ECameraNavigationType::Gesture) + return current_plate == nullptr ? std::nullopt : + std::make_optional(current_plate->get_bounding_box().center()); + + const GLGizmosManager::EType gizmo_type = m_gizmos.get_current_type(); + const bool use_scene_target = m_canvas_type == ECanvasType::CanvasAssembleView || + gizmo_type == GLGizmosManager::FdmSupports || gizmo_type == GLGizmosManager::Seam || + gizmo_type == GLGizmosManager::MmSegmentation || gizmo_type == GLGizmosManager::FuzzySkin; + if (use_scene_target) { + if (!m_selection.is_empty()) + return m_selection.get_bounding_box().center(); + + // Orca: Preserve the world-origin fallback used by orbit in an empty scene. + return volumes_bounding_box().center(); + } + + // Orca: Free-camera rotation uses Camera::m_target rather than a plate or selection pivot. + if (wxGetApp().app_config->get_bool("use_free_camera")) + return std::nullopt; + + Vec3d target = Vec3d::Zero(); + if (m_canvas_type == ECanvasType::CanvasPreview) { + if (current_plate != nullptr) + target = current_plate->get_bounding_box().center(); + } else if (!m_selection.is_empty()) { + target = m_selection.get_bounding_box().center(); + } else { + // Orca: Match regular mouse orbit: objects on the active plate, then the plate itself. + BoundingBoxf3 bbox = volumes_bounding_box(true); + if (!bbox.defined && current_plate != nullptr) + bbox = current_plate->get_bounding_box(); + if (bbox.defined) + target = bbox.center(); + } + + // Orca: Preserve the existing zero sentinel used by regular mouse orbit. + return target.isZero() ? std::nullopt : std::make_optional(target); +} + +bool GLCanvas3D::is_bed_visible() const +{ + if (m_canvas_type == ECanvasType::CanvasPreview) + return m_render_preview; + if (m_canvas_type != ECanvasType::CanvasView3D || !m_show_bed) + return false; + if (!m_main_toolbar.is_enabled()) + return true; + + const auto type = m_gizmos.get_current_type(); + return type != GLGizmosManager::FdmSupports && type != GLGizmosManager::Seam && + type != GLGizmosManager::MmSegmentation && type != GLGizmosManager::FuzzySkin; +} + +Vec3d GLCanvas3D::get_camera_pan_anchor(Camera& camera, ECameraNavigationType navigation_type, + const Vec2d& screen_position) const +{ + // Orthographic panning has the same scale at every depth, so no raycast is needed. + if (camera.get_type() != Camera::EType::Perspective) + return camera.get_target(); + + // Orca: Reject non-finite anchors and points behind the camera before their depth is + // allowed to scale a perspective pan. + const Vec3d camera_position = camera.get_position(); + const Vec3d camera_forward = camera.get_dir_forward(); + const auto is_valid_anchor = [&camera_position, &camera_forward](const Vec3d& anchor) { + return anchor.allFinite() && (anchor - camera_position).dot(camera_forward) > EPSILON; + }; + + // Orca: Prefer the nearest visible bed or volume surface and exclude gizmos and + // selected-volume picking priority from navigation depth selection. + const ClippingPlane clipping_plane = get_raycaster_clipping_plane(); + const bool bed_visible = is_bed_visible(); + const SceneRaycaster::HitResult hit = m_scene_raycaster.hit(screen_position, camera, &clipping_plane, + bed_visible ? SceneRaycaster::EHitMode::SceneOnly : SceneRaycaster::EHitMode::VolumesOnly); + if (hit.is_valid()) { + const Vec3d hit_position = hit.position.cast(); + if (is_valid_anchor(hit_position)) + return hit_position; + } + + // Orca: When the cursor is just outside the visible plate, use the point under it on the active + // plate plane. Using the plate center here would give it a different perspective depth. + PartPlate* current_plate = wxGetApp().plater()->get_partplate_list().get_curr_plate(); + // Orca: An almost edge-on perspective makes intersection depth extremely sensitive to + // the cursor's vertical position. Use the stable orbit depth around horizontal views. + static constexpr double min_plate_plane_forward_z = 0.05; + if (bed_visible && std::abs(camera_forward.z()) >= min_plate_plane_forward_z && + current_plate != nullptr && current_plate->get_bounding_box().defined) { + Vec3d ray_origin; + Vec3d ray_direction; + CameraUtils::ray_from_screen_pos(camera, screen_position, ray_origin, ray_direction); + const double z_direction = ray_direction.z(); + if (ray_origin.allFinite() && ray_direction.allFinite() && std::abs(z_direction) > EPSILON) { + const double plate_z = current_plate->get_bounding_box().center().z(); + const double distance = (plate_z - ray_origin.z()) / z_direction; + const Vec3d plate_position = ray_origin + distance * ray_direction; + const double eye_depth = (plate_position - camera_position).dot(camera_forward); + if (distance >= 0.0 && is_valid_anchor(plate_position) && + eye_depth >= camera.get_near_z() && eye_depth <= camera.get_far_z()) + return plate_position; + } + } + + // Orca: Near-horizontal rays and points outside the scene depth use the orbit reference point. + const std::optional orbit_target = get_camera_orbit_target(navigation_type); + return orbit_target.has_value() && is_valid_anchor(*orbit_target) ? *orbit_target : camera.get_target(); +} + // While it looks like we can call // this->reload_scene(true, true) // the two functions are quite different: diff --git a/src/slic3r/GUI/GLCanvas3D.hpp b/src/slic3r/GUI/GLCanvas3D.hpp index ad5188f2f3..36a6c7b944 100644 --- a/src/slic3r/GUI/GLCanvas3D.hpp +++ b/src/slic3r/GUI/GLCanvas3D.hpp @@ -185,8 +185,6 @@ wxDECLARE_EVENT(EVT_GLCANVAS_MOUSE_DRAGGING_FINISHED, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_UPDATE_BED_SHAPE, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_TAB, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_RESETGIZMOS, SimpleEvent); -wxDECLARE_EVENT(EVT_GLCANVAS_MOVE_SLIDERS, wxKeyEvent); -wxDECLARE_EVENT(EVT_GLCANVAS_JUMP_TO, wxKeyEvent); wxDECLARE_EVENT(EVT_GLCANVAS_UNDO, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_REDO, SimpleEvent); wxDECLARE_EVENT(EVT_GLCANVAS_SWITCH_TO_OBJECT, SimpleEvent); @@ -338,6 +336,8 @@ class GLCanvas3D int move_volume_idx{ -1 }; bool move_requires_threshold{ false }; Point move_start_threshold_position_2D{ Invalid_2D_Point }; + // Orca: Keep the world-space point selected at the start of a mouse pan. + std::optional camera_pan_anchor; }; bool dragging{ false }; @@ -346,7 +346,12 @@ class GLCanvas3D Drag drag; bool ignore_right_up; - void set_start_position_2D_as_invalid() { drag.start_position_2D = Drag::Invalid_2D_Point; } + // Orca: The screen-space start and world-space anchor describe the same pan session. + // Invalidating one must invalidate the other so a new drag cannot reuse stale depth. + void set_start_position_2D_as_invalid() { + drag.start_position_2D = Drag::Invalid_2D_Point; + drag.camera_pan_anchor.reset(); + } void set_start_position_3D_as_invalid() { drag.start_position_3D = Drag::Invalid_3D_Point; } void set_move_start_threshold_position_2D_as_invalid() { drag.move_start_threshold_position_2D = Drag::Invalid_2D_Point; } @@ -549,6 +554,8 @@ private: bool m_fps_overlay_tick{ false }; LayersEditing m_layers_editing; Mouse m_mouse; + // Orca: Gesture pans have their own lifecycle and stable world-space anchor. + std::optional m_gesture_pan_anchor; GLGizmosManager m_gizmos; //BBS: GUI refactor: GLToolbar mutable GLToolbar m_main_toolbar; @@ -1292,6 +1299,8 @@ public: Vec3d _mouse_to_3d(const Point& mouse_pos, float* z = nullptr); bool make_current_for_postinit(); + // Sizes ImGui's fonts and style for this canvas; the fonts are rebuilt when the size changes. + void set_imgui_scaling(); private: bool _is_shown_on_screen() const; @@ -1311,6 +1320,7 @@ private: bool _init_collapse_toolbar(); bool _set_current(); + bool _set_shown_canvas_current(); void _resize(unsigned int w, unsigned int h); //BBS: add part plate related logic @@ -1324,6 +1334,7 @@ private: void _picking_pass(); void _rectangular_selection_picking_pass(); bool _is_fxaa_enabled() const; + bool _is_realistic_view_enabled() const; bool _is_ssao_enabled() const; int _get_effective_fps_cap() const; bool _is_fps_overlay_enabled() const; @@ -1405,6 +1416,20 @@ private: // Convert the screen space coordinate to world coordinate on the bed. Vec3d _mouse_to_bed_3d(const Point& mouse_pos); + // Orca: Navigation type selects the legacy pivot policy used when no visible surface is hit. + enum class ECameraNavigationType : unsigned char + { + Mouse, + Gesture + }; + + // Orca: These helpers keep clipping, orbit pivots, and perspective-pan depth selection consistent. + ClippingPlane get_raycaster_clipping_plane() const; + bool is_bed_visible() const; + std::optional get_camera_orbit_target(ECameraNavigationType navigation_type) const; + Vec3d get_camera_pan_anchor(Camera& camera, ECameraNavigationType navigation_type, + const Vec2d& screen_position) const; + void _start_timer() { m_timer.Start(100, wxTIMER_CONTINUOUS); } void _stop_timer() { m_timer.Stop(); } diff --git a/src/slic3r/GUI/GLModel.cpp b/src/slic3r/GUI/GLModel.cpp index 3dd15c3fdd..92296030e1 100644 --- a/src/slic3r/GUI/GLModel.cpp +++ b/src/slic3r/GUI/GLModel.cpp @@ -456,8 +456,9 @@ void GLModel::init_from(const indexed_triangle_set& its) data.reserve_vertices(3 * its.indices.size()); data.reserve_indices(3 * its.indices.size()); - // Read user preference: smooth normals enabled - const bool smooth_normals_enabled = wxGetApp().app_config != nullptr && wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_SMOOTH_NORMALS); + // CLI thumbnail generation can initialize models without a wx application. + const bool smooth_normals_enabled = wxApp::GetInstance() != nullptr && wxGetApp().app_config != nullptr && + wxGetApp().app_config->get_bool(SETTING_OPENGL_PHONG_SMOOTH_NORMALS); if (smooth_normals_enabled) { // Use per-corner smooth normals (via IGL) diff --git a/src/slic3r/GUI/GUI_App.cpp b/src/slic3r/GUI/GUI_App.cpp index 48bd58b1a5..a41001f9e0 100644 --- a/src/slic3r/GUI/GUI_App.cpp +++ b/src/slic3r/GUI/GUI_App.cpp @@ -857,13 +857,18 @@ void GUI_App::post_init() slow_bootup = true; BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ", slow bootup, won't render gl here."; } - if (!switch_to_3d) { + // Starting on Home, the GL resources load at idle so Home paints first and Prepare is never + // shown. + const bool gl_at_idle = !starts_on_prepare() && is_editor(); + if (!switch_to_3d && gl_at_idle) { + plater_->select_view_3D("3D"); + } else if (!switch_to_3d) { BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ", begin load_gl_resources"; #ifndef __linux__ mainframe->Freeze(); #endif plater_->canvas3D()->enable_render(false); - mainframe->select_tab(TAB_ID_PREPARE); + mainframe->select_prepare_for_gl_init(); plater_->select_view_3D("3D"); //BBS init the opengl resource here if (!plater_->canvas3D()->get_wxglcanvas()->IsShownOnScreen() || @@ -900,9 +905,7 @@ void GUI_App::post_init() BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ", finished rendering a first frame for test"; } } - if (is_editor()) - mainframe->select_tab(TAB_ID_HOME); - if (app_config->get("default_page") == "1") + if (starts_on_prepare()) mainframe->select_tab(TAB_ID_PREPARE); #ifndef __linux__ mainframe->Thaw(); @@ -912,6 +915,7 @@ void GUI_App::post_init() plater_->trigger_restore_project(1); //#endif + mainframe->prebuild_pages_when_idle(); //BBS: remove GCodeViewer as seperate APP logic /*if (this->init_params->start_as_gcodeviewer) { @@ -1926,9 +1930,9 @@ bool GUI_App::hot_reload_network_plugin() m_device_manager->add_user_subscribe(); } - if (mainframe && mainframe->m_monitor) { - mainframe->m_monitor->update_network_version_footer(); - mainframe->m_monitor->set_default(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) { + monitor->update_network_version_footer(); + monitor->set_default(); BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": reset monitor panel"; } @@ -2182,6 +2186,8 @@ void GUI_App::init_networking_callbacks() obj->command_get_access_code(); if (m_agent) m_agent->install_device_cert(obj->get_dev_id(), obj->is_lan_mode_printer()); + + obj->set_online_state(true); } }); }); @@ -2220,6 +2226,8 @@ void GUI_App::init_networking_callbacks() obj->command_get_version(); event.SetInt(0); event.SetString(obj->get_dev_id()); + + obj->set_online_state(true); } else if (state == ConnectStatus::ConnectStatusFailed) { // Orca: only update status if same device id if (m_device_manager->selected_machine != dev_id) return; @@ -2235,10 +2243,14 @@ void GUI_App::init_networking_callbacks() wxGetApp().show_dialog(text); } event.SetInt(-1); + + obj->set_online_state(false); } else if (state == ConnectStatus::ConnectStatusLost) { m_device_manager->set_selected_machine(""); event.SetInt(-1); BOOST_LOG_TRIVIAL(info) << "set_on_local_connect_fn: state = lost"; + + obj->set_online_state(false); } else { event.SetInt(-1); BOOST_LOG_TRIVIAL(info) << "set_on_local_connect_fn: state = " << state; @@ -3411,14 +3423,20 @@ bool GUI_App::on_init_inner() } BOOST_LOG_TRIVIAL(info) << "create the main window"; mainframe = new MainFrame(); - // hide settings tabs after first Layout + // The first render can happen as soon as the frame is shown, before the queued + // new_project() sets the same view. + plater_->get_camera().select_view("topfront"); + plater_->get_camera().requires_zoom_to_bed = true; if (is_editor()) { - mainframe->select_tab(TAB_ID_HOME); + if (starts_on_prepare()) { + mainframe->select_tab(TAB_ID_PREPARE); + } else { + mainframe->select_tab(TAB_ID_HOME); + } } sidebar().obj_list()->init(); //sidebar().aux_list()->init_auxiliary(); - mainframe->m_project->init_auxiliary(); // update_mode(); // !!! do that later SetTopWindow(mainframe); @@ -4129,13 +4147,13 @@ void GUI_App::select_machine(const std::string& agent_id) // Use MonitorPanel::select_machine() to trigger full selection flow // This reuses existing logic for machine switching (UI updates, callbacks, etc.) - if (mainframe && mainframe->m_monitor) { - mainframe->m_monitor->select_machine(dev_id); + if (MonitorPanel* monitor = MonitorPanel::if_built()) { + monitor->select_machine(dev_id); BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": triggered select_machine for dev_id=" << dev_id; - } else { - // Fallback if MonitorPanel not available - m_device_manager->set_selected_machine(dev_id); - BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": fallback set_selected_machine dev_id=" << dev_id; + } else if (m_device_manager->set_selected_machine(dev_id)) { + // The Device tab's own state is set when the tab is built. + MonitorPanel::on_machine_selected(m_device_manager->get_selected_machine()); + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": set_selected_machine dev_id=" << dev_id; } } @@ -4659,6 +4677,7 @@ void GUI_App::recreate_GUI(const wxString &msg_name) //BBS: trigger restore project logic here, and skip confirm plater_->trigger_restore_project(1); + mainframe->prebuild_pages_when_idle(); // #ys_FIXME_delete_after_testing Do we still need this ? // CallAfter([]() { @@ -5000,7 +5019,8 @@ void GUI_App::get_login_info(const std::string& provider/* = ORCA_CLOUD_PROVIDER wxString strJS = wxString::Format("window.postMessage(%s)", from_u8(logout_cmd)); GUI::wxGetApp().run_script(strJS); } - mainframe->m_webview->SetLoginPanelVisibility(true); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SetLoginPanelVisibility(true); } } @@ -5132,9 +5152,9 @@ std::string GUI_App::handle_web_request(std::string cmd) "homepage_bambu_login_or_register", }; if (app_config->get_stealth_mode() && stealth_blocked_info_commands.count(command_str)) { - CallAfter([this] { - if (mainframe && mainframe->m_webview) - mainframe->m_webview->SendCloudProvidersInfo(); + CallAfter([] { + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SendCloudProvidersInfo(); }); return ""; } @@ -5148,8 +5168,8 @@ std::string GUI_App::handle_web_request(std::string cmd) if (dlg.ShowModal() == wxID_OK) { app_config->set_bool("stealth_mode", false); app_config->save(); - if (mainframe && mainframe->m_webview) - mainframe->m_webview->SendCloudProvidersInfo(); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SendCloudProvidersInfo(); // Continue with login if (command_str == "homepage_login_or_register") this->request_login(true); @@ -5230,8 +5250,8 @@ std::string GUI_App::handle_web_request(std::string cmd) } else if (command_str.compare("get_recent_projects") == 0) { if (mainframe) { - if (mainframe->m_webview) { - mainframe->m_webview->SendRecentList(INT_MAX); + if (WebViewPanel* home = WebViewPanel::if_built()) { + home->SendRecentList(INT_MAX); } } } @@ -7764,8 +7784,8 @@ void GUI_App::on_stealth_mode_enter() BOOST_LOG_TRIVIAL(info) << "logout: on_stealth_mode_enter"; request_user_logout(ORCA_CLOUD_PROVIDER); request_user_logout(BBL_CLOUD_PROVIDER); - if (mainframe && mainframe->m_webview) { - mainframe->m_webview->SendCloudProvidersInfo(); + if (WebViewPanel* home = WebViewPanel::if_built()) { + home->SendCloudProvidersInfo(); } } @@ -8175,6 +8195,26 @@ ConfigOptionMode GUI_App::get_saved_mode() return saved_mode_from_string(app_config->get("user_mode")); } +bool GUI_App::starts_on_prepare() const +{ + return app_config->get("default_page") == "1"; +} + +int GUI_App::input_idle_ms() const +{ + return int(std::chrono::duration_cast(std::chrono::steady_clock::now() - m_last_input).count()); +} + +// Every wxCommandEvent claims the user-input category, so only real mouse and key events count, +// plus main window resizes, since a border drag produces no mouse events. +int GUI_App::FilterEvent(wxEvent& event) +{ + if ((!event.IsCommandEvent() && (event.GetEventCategory() & wxEVT_CATEGORY_USER_INPUT)) || + (event.GetEventType() == wxEVT_SIZE && event.GetEventObject() == mainframe)) + m_last_input = std::chrono::steady_clock::now(); + return Event_Skip; +} + ConfigOptionMode GUI_App::get_mode() { return app_config->get_bool("developer_mode") ? comDevelop : get_saved_mode(); @@ -8226,9 +8266,10 @@ void GUI_App::update_mode() mainframe->m_param_panel->update_mode(); if (mainframe->m_param_dialog) mainframe->m_param_dialog->panel()->update_mode(); - if (mainframe->m_printer_view) - mainframe->m_printer_view->update_mode(); - mainframe->m_webview->update_mode(); + if (PrinterWebView* view = PrinterWebView::if_built()) + view->update_mode(); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->update_mode(); #ifdef _MSW_DARK_MODE if (!wxGetApp().tabs_as_menu()) @@ -8246,9 +8287,10 @@ void GUI_App::update_mode() } void GUI_App::update_internal_development() { - mainframe->m_webview->update_mode(); - if (mainframe->m_printer_view) - mainframe->m_printer_view->update_mode(); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->update_mode(); + if (PrinterWebView* view = PrinterWebView::if_built()) + view->update_mode(); } void GUI_App::show_ip_address_enter_dialog(wxString title) diff --git a/src/slic3r/GUI/GUI_App.hpp b/src/slic3r/GUI/GUI_App.hpp index 2d55c5e96c..a8fa8432b1 100644 --- a/src/slic3r/GUI/GUI_App.hpp +++ b/src/slic3r/GUI/GUI_App.hpp @@ -1,6 +1,7 @@ #ifndef slic3r_GUI_App_hpp_ #define slic3r_GUI_App_hpp_ +#include #include #include #include @@ -248,6 +249,7 @@ private: bool m_app_conf_exists{ false }; EAppMode m_app_mode{ EAppMode::Editor }; bool m_is_recreating_gui{ false }; + std::chrono::steady_clock::time_point m_last_input{ std::chrono::steady_clock::now() }; #ifdef __linux__ bool m_opengl_initialized{ false }; #endif @@ -387,6 +389,11 @@ public: bool is_editor() const { return m_app_mode == EAppMode::Editor; } bool is_gcode_viewer() const { return m_app_mode == EAppMode::GCodeViewer; } bool is_recreating_gui() const { return m_is_recreating_gui; } + // Milliseconds since the last mouse or keyboard event the app processed, or main window resize. + int input_idle_ms() const; + int FilterEvent(wxEvent& event) override; + // The Preferences "Default page" choice, stored as its index: 0 Home, 1 Prepare. + bool starts_on_prepare() const; std::string logo_name() const { return is_editor() ? "OrcaSlicer" : "OrcaSlicer-gcodeviewer"; } bool is_closing() const { return m_is_closing.load(std::memory_order_acquire); } diff --git a/src/slic3r/GUI/GUI_Factories.cpp b/src/slic3r/GUI/GUI_Factories.cpp index ecca540aa9..8bc899bb3d 100644 --- a/src/slic3r/GUI/GUI_Factories.cpp +++ b/src/slic3r/GUI/GUI_Factories.cpp @@ -336,13 +336,20 @@ wxBitmap SettingsFactory::get_category_bitmap(const std::string& category_name, //------------------------------------- // Note: id accords to type of the sub-object (adding volume), so sequence of the menu items is important -static const constexpr std::array, 5> ADD_VOLUME_MENU_ITEMS = {{ +static const constexpr std::array, 11> ADD_VOLUME_MENU_ITEMS = {{ // menu_item Name menu_item bitmap name {L("Add Part"), "menu_add_part" }, // ~ModelVolumeType::MODEL_PART {L("Add Negative Part"), "menu_add_negative" }, // ~ModelVolumeType::NEGATIVE_VOLUME {L("Add Modifier"), "menu_add_modifier"}, // ~ModelVolumeType::PARAMETER_MODIFIER {L("Add Support Blocker"), "menu_support_blocker"}, // ~ModelVolumeType::SUPPORT_BLOCKER {L("Add Support Enforcer"), "menu_support_enforcer"}, // ~ModelVolumeType::SUPPORT_ENFORCER + // Precise Seam modifiers (all 6 subtypes - only first one shown in menu, others used for tree icons) + {L("Add Precise Seam"), "menu_precise_seam_center"}, // ~ModelVolumeType::PRECISE_SEAM_CENTER + {L("Add Precise Seam"), "menu_precise_seam_left"}, // ~ModelVolumeType::PRECISE_SEAM_LEFT + {L("Add Precise Seam"), "menu_precise_seam_right"}, // ~ModelVolumeType::PRECISE_SEAM_RIGHT + {L("Add Precise Seam"), "menu_precise_seam_enforced"}, // ~ModelVolumeType::PRECISE_SEAM_ENFORCED + {L("Add Precise Seam"), "menu_precise_seam_blocked"}, // ~ModelVolumeType::PRECISE_SEAM_BLOCKED + {L("Add Precise Seam"), "menu_precise_seam_neutral"}, // ~ModelVolumeType::PRECISE_SEAM_NEUTRAL }}; // Note: id accords to type of the sub-object (adding volume), so sequence of the menu items is important @@ -740,10 +747,20 @@ void MenuFactory::append_menu_items_add_volume(wxMenu* menu) for (size_t type = 0; type < ADD_VOLUME_MENU_ITEMS.size(); type++) { + // Skip Precise Seam subtypes except the first one (CENTER) - they are only used for tree icons + if (type >= int(ModelVolumeType::PRECISE_SEAM_LEFT) && + type <= int(ModelVolumeType::PRECISE_SEAM_NEUTRAL)) + continue; + auto& item = ADD_VOLUME_MENU_ITEMS[type]; + // Use special icon for "Add Precise Seam" menu (different from tree icon) + std::string icon_name = item.second; + if (type == int(ModelVolumeType::PRECISE_SEAM_CENTER)) + icon_name = "menu_precise_seam_add"; + wxMenu* sub_menu = append_submenu_add_generic(menu, ModelVolumeType(type)); - append_submenu(menu, sub_menu, wxID_ANY, _(item.first), "", item.second, + append_submenu(menu, sub_menu, wxID_ANY, _(item.first), "", icon_name, []() { return obj_list()->is_instance_or_object_selected(); }, m_parent); } @@ -843,11 +860,16 @@ wxMenuItem* MenuFactory::append_menu_item_change_type(wxMenu* menu) }; std::vector types = { - { ModelVolumeType::MODEL_PART, _L("Part") }, - { ModelVolumeType::NEGATIVE_VOLUME, _L("Negative Part") }, - { ModelVolumeType::PARAMETER_MODIFIER, _L("Modifier") }, - { ModelVolumeType::SUPPORT_BLOCKER, _L("Support Blocker") }, - { ModelVolumeType::SUPPORT_ENFORCER, _L("Support Enforcer") } + { ModelVolumeType::MODEL_PART, _L("Part") }, + { ModelVolumeType::NEGATIVE_VOLUME, _L("Negative Part") }, + { ModelVolumeType::PARAMETER_MODIFIER, _L("Modifier") }, + { ModelVolumeType::SUPPORT_BLOCKER, _L("Support Blocker") }, + { ModelVolumeType::SUPPORT_ENFORCER, _L("Support Enforcer") }, + // Single "Precise Seam" entry that maps to PRECISE_SEAM_CENTER as the default subtype. + // set_volume_type() preserves the existing subtype (LEFT/RIGHT/etc.) for volumes that + // are already Precise Seam; subtype picking is done via the separate + // "Precise Seam Type" submenu (see append_menu_item_precise_seam_submenu). + { ModelVolumeType::PRECISE_SEAM_CENTER, _L("Precise Seam") } }; for (const auto& info : types) { @@ -863,7 +885,13 @@ wxMenuItem* MenuFactory::append_menu_item_change_type(wxMenu* menu) obj_list()->GetSelections(sels); for (auto item : sels) { ModelVolumeType vol_type = model->GetVolumeType(item); - if (vol_type == type) { + // The "Precise Seam" entry represents all six PS subtypes, so any subtype + // among selected volumes counts as a match (keeps the checkbox ticked when + // user has PS_LEFT/RIGHT/etc. selected, not only plain CENTER). + const bool match = (type == ModelVolumeType::PRECISE_SEAM_CENTER) + ? is_precise_seam(vol_type) + : (vol_type == type); + if (match) { has_type = true; break; } @@ -871,6 +899,7 @@ wxMenuItem* MenuFactory::append_menu_item_change_type(wxMenu* menu) evt.Check(has_type); // ORCA Fix crash caused by SVG/TEXT volumes cant be Support Enforcer/Blocker type + // The same applies to Precise Seam subtypes. for (auto item : sels) { if (model->GetItemType(item) == itVolume){ auto vol_idx = model->GetVolumeIdByItem(item); @@ -881,7 +910,8 @@ wxMenuItem* MenuFactory::append_menu_item_change_type(wxMenu* menu) auto vol = (*objs)[obj_idx]->volumes[vol_idx]; // disable Support Enforcer/Blocker if selection contains svg or text - if (vol != nullptr && (vol->is_svg() || vol->is_text()) && (type == ModelVolumeType::SUPPORT_BLOCKER || type == ModelVolumeType::SUPPORT_ENFORCER)){ + // (same applies to Precise Seam) + if (vol != nullptr && (vol->is_svg() || vol->is_text()) && (type == ModelVolumeType::SUPPORT_BLOCKER || type == ModelVolumeType::SUPPORT_ENFORCER || is_precise_seam(type))){ evt.Enable(false); break; } @@ -1309,6 +1339,131 @@ void MenuFactory::append_menu_items_mirror(wxMenu* menu) []() { return plater()->can_mirror(); }, m_parent); } +void MenuFactory::append_menu_item_precise_seam_submenu(wxMenu* menu) +{ + wxString submenu_name = _L("Precise Seam Type"); + + // Remove existing submenu if present (menu is rebuilt on every right-click) + const int menu_item_id = menu->FindItem(submenu_name); + if (menu_item_id != wxNOT_FOUND) + menu->Destroy(menu_item_id); + + // --- Precondition: ALL selected volumes must be Precise Seam --- + // Mixed selections (PS + non-PS) are ambiguous for subtype switching: applying a subtype + // would implicitly convert the non-PS volumes to PS, which is not what the user expects + // from a subtype picker. For mixed selections the user should first use + // "Change type → Precise Seam" to unify them, then come back to this submenu. + wxDataViewItemArray sels; + obj_list()->GetSelections(sels); + if (sels.IsEmpty()) + return; + + // A right-click on a volume in the 3D view routes through Plater::show_context_menu + // → ObjectList::update_selections(), which intentionally preserves a pre-existing + // settings-row selection alongside the clicked volume. As a result GetSelections() + // may return settings-row items that are children of a volume. Treat each settings + // row as selecting its parent volume (same pattern used by set_volume_type() + // internally). Without this resolution, GetVolumeType(settings_row) returns INVALID + // and the submenu would hide even when a valid PS volume is in the selection. + // + // Precomputing the resolved PS types once here also lets the checkmark loop below + // display checks correctly for selections that contain settings rows. + std::vector selected_ps_types; + selected_ps_types.reserve(sels.size()); + + auto* model = obj_list()->GetModel(); + for (const auto& sel_item : sels) { + wxDataViewItem vol_item = sel_item; + const ItemType type_mask = model->GetItemType(sel_item); + if (!(type_mask & itVolume)) { + // Only settings rows whose parent is a volume map to "selecting that volume". + // Any other non-volume item (object, instance, etc.) means the selection is + // not purely PS-volume-based — hide the submenu. + if ((type_mask & itSettings) && (model->GetItemType(model->GetParent(sel_item)) & itVolume)) + vol_item = model->GetParent(sel_item); + else + return; + } + const ModelVolumeType vol_type = model->GetVolumeType(vol_item); + if (!is_precise_seam(vol_type)) + return; + selected_ps_types.push_back(vol_type); + } + + // Match the label used by append_menu_item_change_type, including its translation. + int insert_pos = wxNOT_FOUND; + int change_type_id = menu->FindItem(_L("Change Type")); + if (change_type_id != wxNOT_FOUND) { + for (size_t i = 0; i < menu->GetMenuItemCount(); i++) { + wxMenuItem* item = menu->FindItemByPosition(i); + if (item && item->GetId() == change_type_id) { + insert_pos = i + 1; // insert directly after the Change Type entry + break; + } + } + } + + // --- Build the subtype submenu --- + wxMenu* ps_menu = new wxMenu(); + + // Array of all 6 Precise Seam subtypes with labels. + // "Seam ..." prefix disambiguates from other i18n contexts (extruder Left/Right, "Center on bed", etc.) + static const std::array, 6> PS_TYPES = {{ + {L("Seam Center"), ModelVolumeType::PRECISE_SEAM_CENTER}, + {L("Seam Left"), ModelVolumeType::PRECISE_SEAM_LEFT}, + {L("Seam Right"), ModelVolumeType::PRECISE_SEAM_RIGHT}, + {L("Seam Enforced"), ModelVolumeType::PRECISE_SEAM_ENFORCED}, + {L("Seam Blocked"), ModelVolumeType::PRECISE_SEAM_BLOCKED}, + {L("Seam Neutral"), ModelVolumeType::PRECISE_SEAM_NEUTRAL}, + }}; + + for (const auto& ps_type : PS_TYPES) { + wxString label = _(ps_type.first); + + // Check-items (not radio): radio groups in wxWidgets auto-select the first item when + // no item is explicitly checked, which misleads the user into seeing "Seam Center" + // as the active subtype for mixed-subtype selections. With check-items we can leave + // every item unchecked in that case, and the menu matches the pattern of the + // neighbouring "Change type" submenu (see append_menu_item_change_type). + // + // Handler: delegate to set_volume_type() with preserve_ps_subtype=false. The user + // explicitly picked a subtype here, so "Seam Center" must set every selected PS + // volume to CENTER verbatim — preservation (the default for "Change type") would + // keep existing subtypes and make CENTER unreachable on mixed-subtype selections. + // set_volume_type() already handles multi-select iteration, the last-solid-part + // guard, and the PS group-change reordering via move_volume_to_end(). + wxMenuItem* item = append_menu_check_item(ps_menu, wxID_ANY, label, "", + [ps_type](wxCommandEvent&) { + obj_list()->set_volume_type(ps_type.second, /*preserve_ps_subtype=*/false); + }, + ps_menu); + + // Tick every subtype that is present in the current selection. Same pattern as the + // neighbouring "Change type" submenu (where selecting [Part + Modifier] ticks both + // "Part" and "Modifier" boxes). For homogeneous selections exactly one checkbox is + // ticked; for mixed subtype selections (e.g. PS_LEFT + PS_RIGHT) both "Seam Left" + // and "Seam Right" appear checked, so the user sees at a glance which subtypes are + // currently in the selection. + // + // Uses the precomputed selected_ps_types (which resolved settings rows to their + // parent volumes); iterating sels directly would miss subtypes for selections that + // arrive via settings rows from right-click-in-3D-view. + const bool is_present = std::find(selected_ps_types.begin(), selected_ps_types.end(), + ps_type.second) != selected_ps_types.end(); + if (is_present && item) + item->Check(true); + } + + // Add submenu to parent menu + append_submenu(menu, ps_menu, wxID_ANY, + submenu_name, + _L("Choose precise seam subtype"), + "menu_precise_seam_type", + []() { return true; }, + m_parent, + insert_pos); +} + void MenuFactory::append_menu_item_edit_text(wxMenu *menu) { wxString name = _L("Edit text"); @@ -1578,6 +1733,7 @@ void MenuFactory::create_part_menu() menu->AppendSeparator(); append_menu_item_change_type(menu); + append_menu_item_precise_seam_submenu(menu); append_menu_items_mirror(&m_part_menu); append_menu_item(&m_part_menu, wxID_ANY, _L("Split"), _L("Split the selected object into multiple parts"), [](wxCommandEvent&) { plater()->split_volume(); }, "split_parts", nullptr, @@ -1875,6 +2031,7 @@ wxMenu* MenuFactory::part_menu() { append_menu_items_convert_unit(&m_part_menu); append_menu_item_change_filament(&m_part_menu); + append_menu_item_precise_seam_submenu(&m_part_menu); append_menu_item_per_object_settings(&m_part_menu); return &m_part_menu; } @@ -1989,6 +2146,10 @@ wxMenu* MenuFactory::multi_selection_menu() append_menu_item_per_object_process(menu); menu->AppendSeparator(); append_menu_item_change_type(menu); + // Subtype picker for Precise Seam — shown only when all selected volumes are PS. + // Must be paired with Change Type here (as in single-volume part_menu), otherwise + // the user cannot switch PS subtypes (LEFT/RIGHT/etc.) on multi-selection. + append_menu_item_precise_seam_submenu(menu); append_menu_item_change_filament(menu); } return menu; diff --git a/src/slic3r/GUI/GUI_Factories.hpp b/src/slic3r/GUI/GUI_Factories.hpp index ec7b0a0b03..ad694f15de 100644 --- a/src/slic3r/GUI/GUI_Factories.hpp +++ b/src/slic3r/GUI/GUI_Factories.hpp @@ -174,6 +174,7 @@ private: void append_menu_item_merge_to_single_object(wxMenu* menu); void append_menu_item_merge_parts_to_single_part(wxMenu *menu); void append_menu_items_mirror(wxMenu *menu); + void append_menu_item_precise_seam_submenu(wxMenu* menu); void append_menu_item_invalidate_cut_info(wxMenu *menu); void append_menu_item_edit_text(wxMenu *menu); void append_menu_item_edit_svg(wxMenu *menu); diff --git a/src/slic3r/GUI/GUI_ObjectList.cpp b/src/slic3r/GUI/GUI_ObjectList.cpp index 2d77200eef..99c023e4a1 100644 --- a/src/slic3r/GUI/GUI_ObjectList.cpp +++ b/src/slic3r/GUI/GUI_ObjectList.cpp @@ -1,5 +1,6 @@ #include "libslic3r/libslic3r.h" #include "libslic3r/PresetBundle.hpp" +#include "libslic3r/LifecycleEvents.hpp" #include "GUI_ObjectList.hpp" #include "GUI_Factories.hpp" //#include "GUI_ObjectLayers.hpp" @@ -10,6 +11,7 @@ #include "BitmapComboBox.hpp" #include "MainFrame.hpp" #include "slic3r/Utils/UndoRedo.hpp" +#include "slic3r/plugin/PluginManager.hpp" #include "OptionsGroup.hpp" #include "Tab.hpp" @@ -1159,17 +1161,39 @@ void ObjectList::update_name_in_model(const wxDataViewItem& item) const if (m_objects_model->GetItemType(item) & itObject) { std::string name = m_objects_model->GetName(item).ToUTF8().data(); if (obj->name != name) { + const std::string previous_name = obj->name; obj->name = name; // if object has just one volume, rename this volume too if (obj->volumes.size() == 1) obj->volumes[0]->name = obj->name; Slic3r::save_object_mesh(*obj); + + LifecycleEventContext ctx; + ctx.name = name; + ctx.previous_name = previous_name; + ctx.id = std::to_string(obj->id().id); + ctx.index = obj_idx; + ctx.source = "object"; + fire_lifecycle_event(LifecycleEvent::ObjectRenamed, ctx); } return; } if (volume_id < 0) return; - obj->volumes[volume_id]->name = m_objects_model->GetName(item).ToUTF8().data(); + std::string name = m_objects_model->GetName(item).ToUTF8().data(); + if (obj->volumes[volume_id]->name == name) + return; + + const std::string previous_name = obj->volumes[volume_id]->name; + obj->volumes[volume_id]->name = name; + + LifecycleEventContext ctx; + ctx.name = name; + ctx.previous_name = previous_name; + ctx.id = std::to_string(obj->volumes[volume_id]->id().id); + ctx.index = volume_id; + ctx.source = "volume"; + fire_lifecycle_event(LifecycleEvent::ObjectRenamed, ctx); } void ObjectList::update_name_in_list(int obj_idx, int vol_idx) const @@ -1920,6 +1944,12 @@ bool ObjectList::can_drop(const wxDataViewItem& item, int& src_obj_id, int& src_ if (dragged_item_v_type == item_v_type && dragged_item_v_type != ModelVolumeType::MODEL_PART) return true; + + // Use tree item types: hidden cut connectors make tree indices differ from volumes indices. + if (is_precise_seam(dragged_item_v_type) && is_precise_seam(item_v_type)) + // Allow reordering only within the strong or weak modifier group. + return is_precise_seam_strong(dragged_item_v_type) == is_precise_seam_strong(item_v_type); + if ((dragged_item_v_type != item_v_type) || // we can't reorder volumes outside of types item_v_type >= ModelVolumeType::SUPPORT_BLOCKER) // support blockers/enforcers can't change its place return false; @@ -2009,10 +2039,43 @@ void ObjectList::OnDrop(wxDataViewEvent &event) int to_volume_id = m_objects_model->GetVolumeIdByItem(item); int delta = to_volume_id < from_volume_id ? -1 : 1; - auto &volumes = (*m_objects)[m_dragged_data.obj_idx()]->volumes; + const int obj_idx = m_dragged_data.obj_idx(); + // Object-indexed UI maps may be stale after another object is removed or reordered. + if (obj_idx < 0 || size_t(obj_idx) >= m_objects->size()) { + event.Veto(); + m_dragged_data.clear(); + return; + } + const ModelObject *object = (*m_objects)[obj_idx]; + auto &volumes = (*m_objects)[obj_idx]->volumes; + std::vector visible_volume_indices; + visible_volume_indices.reserve(volumes.size()); + for (size_t idx = 0; idx < volumes.size(); ++idx) + // Match add_volumes_to_object_in_list: only connectors of cut objects are hidden. + if (!(object->is_cut() && volumes[idx]->is_cut_connector())) + visible_volume_indices.push_back(idx); - int cnt = 0; - for (int id = from_volume_id; cnt < abs(from_volume_id - to_volume_id); id += delta, cnt++) std::swap(volumes[id], volumes[id + delta]); + // Validate the entire move before any swap; these checks must also protect Release builds. + if (from_volume_id < 0 || to_volume_id < 0 || + size_t(from_volume_id) >= visible_volume_indices.size() || size_t(to_volume_id) >= visible_volume_indices.size()) { + event.Veto(); + m_dragged_data.clear(); + return; + } + + // Move through visible slots only, keeping hidden cut connectors at their original indices. + // The local mapping stays valid because no hidden volume changes slots during the move. + for (int id = from_volume_id; id != to_volume_id; id += delta) { + const size_t current_idx = visible_volume_indices[id]; + const size_t next_idx = visible_volume_indices[id + delta]; + std::swap(volumes[current_idx], volumes[next_idx]); + } + + // Later selection/filament handlers use this cache; repair it for the moved object too. + auto &ui_to_model = m_objects_model->get_ui_and_3d_volume_map()[obj_idx]; + ui_to_model.clear(); + for (size_t idx = 0; idx < visible_volume_indices.size(); ++idx) + ui_to_model[int(idx)] = int(visible_volume_indices[idx]); select_item(m_objects_model->ReorganizeChildren(from_volume_id, to_volume_id, m_objects_model->GetParent(item))); @@ -3519,7 +3582,14 @@ void ObjectList::delete_all_connectors_for_object(int obj_idx) obj->delete_connectors(); if (obj->volumes.empty() || !obj->has_solid_mesh()) { + const std::string deleted_obj_name = obj->name; model.delete_object(idx); + { + Slic3r::LifecycleEventContext ctx; + ctx.name = deleted_obj_name; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectDeleted, ctx); + } m_objects_model->Delete(m_objects_model->GetItemById(idx)); continue; } @@ -3824,7 +3894,8 @@ wxDataViewItem ObjectList::add_settings_item(wxDataViewItem parent_item, const D const bool is_layer_settings = m_objects_model->GetItemType(parent_item) == itLayer; if (!is_object_settings) { ModelVolumeType volume_type = m_objects_model->GetVolumeType(parent_item); - if (volume_type == ModelVolumeType::NEGATIVE_VOLUME || volume_type == ModelVolumeType::SUPPORT_BLOCKER || volume_type == ModelVolumeType::SUPPORT_ENFORCER) + // Precise Seam is non-printing helper geometry — no per-volume settings + if (volume_type == ModelVolumeType::NEGATIVE_VOLUME || volume_type == ModelVolumeType::SUPPORT_BLOCKER || volume_type == ModelVolumeType::SUPPORT_ENFORCER || is_precise_seam(volume_type)) return ret; } @@ -4088,6 +4159,13 @@ void ObjectList::add_object_to_list(size_t obj_idx, bool call_selection_changed, const auto item = m_objects_model->AddObject(model_object, warning_bitmap, model_object->is_cut()); Expand(m_objects_model->GetParent(item)); + { + Slic3r::LifecycleEventContext ctx; + ctx.name = model_object->name; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectAdded, ctx); + } + if (!do_info_update) return; @@ -5674,7 +5752,6 @@ void ObjectList::change_part_type() return; } #endif - ModelVolumeType ObjectList::get_selected_volume_type() { ModelVolume* volume = get_selected_model_volume(); @@ -5683,13 +5760,49 @@ ModelVolumeType ObjectList::get_selected_volume_type() return ModelVolumeType::INVALID; } -void ObjectList::set_volume_type(ModelVolumeType new_type) +// ---------------- Helpers for Precise Seam group-aware type changes ---------------- +// Used by set_volume_type() and the "Precise Seam Type" subtype submenu handler. + +// Detects whether a type change crosses a Precise Seam "group boundary" that requires +// manual repositioning inside ModelObject::volumes[]: +// - between any non-PS type and any PS subtype, or +// - between strong PS (CENTER/LEFT/RIGHT) and weak PS (ENFORCED/BLOCKED/NEUTRAL). +// sort_volumes() is stable and groups strong PS before weak PS. When a volume crosses +// a group, moving it to the end of volumes[] lets the subsequent stable sort place it +// at the end of its new group. Without this, a strong→weak transition would leave the +// volume stuck in the strong segment and break the modifier-application order. +static bool precise_seam_group_changed(ModelVolumeType old_type, ModelVolumeType new_type) +{ + const bool old_is_ps = is_precise_seam(old_type); + const bool new_is_ps = is_precise_seam(new_type); + if (old_is_ps != new_is_ps) + return true; // non-PS ↔ PS transition + if (!old_is_ps) + return false; // both non-PS — regular enum ordering is enough + return is_precise_seam_strong(old_type) != is_precise_seam_strong(new_type); +} + +// Moves a volume to the end of ModelObject::volumes[]. Combined with stable sort_volumes(), +// this places it at the end of its new group while preserving relative order of others. +static void move_volume_to_end(ModelObject* obj, ModelVolume* volume) +{ + if (obj == nullptr || volume == nullptr) + return; + auto it = std::find(obj->volumes.begin(), obj->volumes.end(), volume); + if (it != obj->volumes.end()) { + obj->volumes.erase(it); + obj->volumes.push_back(volume); + } +} + +void ObjectList::set_volume_type(ModelVolumeType new_type, bool preserve_ps_subtype) { struct VolumeSelection { int object_idx; ModelVolume* volume; }; + // --- Collect selected volumes from the object tree, falling back to the 3D canvas --- std::vector volumes; auto add_volume = [&volumes](int obj_idx, ModelVolume* volume) { if (volume == nullptr) @@ -5754,25 +5867,49 @@ void ObjectList::set_volume_type(ModelVolumeType new_type) // and historically crashed (originally fixed in the now-disabled change_part_type() by hiding // Support entries in the old choice dialog; the UI-side guard for the current submenu lives // in MenuFactory::append_menu_item_change_type, see #13120). + // The same rationale applies to any Precise Seam subtype. // This block must never be reachable under a healthy UI; if it ever logs, the UI guard has // been bypassed (new entry point, refactor, plugin, etc.) and should be investigated. - if (new_type == ModelVolumeType::SUPPORT_BLOCKER || new_type == ModelVolumeType::SUPPORT_ENFORCER) { + if (new_type == ModelVolumeType::SUPPORT_BLOCKER || new_type == ModelVolumeType::SUPPORT_ENFORCER + || is_precise_seam(new_type)) { const bool has_text_or_svg = std::any_of(volumes.begin(), volumes.end(), [](const VolumeSelection& sel) { return sel.volume->is_svg() || sel.volume->is_text(); }); if (has_text_or_svg) { BOOST_LOG_TRIVIAL(error) << __FUNCTION__ - << ": blocked attempt to set SUPPORT_BLOCKER/ENFORCER on SVG/text volume; " + << ": blocked attempt to set SUPPORT_BLOCKER/ENFORCER or Precise Seam on SVG/text volume; " << "UI guard should have prevented this -- possible regression in the Change Type menu"; return; } } + // --- Subtype preservation for the generic "Precise Seam" entry --- + // The Change Type submenu uses PRECISE_SEAM_CENTER as the single "Precise Seam" entry + // and calls with preserve_ps_subtype=true: volumes that are already Precise Seam keep + // their subtype (LEFT/RIGHT/etc.); only non-PS volumes get converted to the default + // CENTER subtype. + // + // The "Precise Seam Type" subtype submenu calls with preserve_ps_subtype=false: the + // user explicitly picked CENTER and all selected PS volumes must be set to CENTER + // verbatim (otherwise CENTER would become unreachable for mixed-subtype selections, + // since preservation would keep every volume at its current subtype and any_diff would + // be false — the reason for this two-parameter split). + auto effective_new_type = [new_type, preserve_ps_subtype](const ModelVolume* v) -> ModelVolumeType { + if (preserve_ps_subtype && new_type == ModelVolumeType::PRECISE_SEAM_CENTER && v->is_precise_seam()) + return v->type(); + return new_type; + }; + + // --- Any-change check using the effective target type --- const bool any_diff = std::any_of(volumes.begin(), volumes.end(), - [new_type](const VolumeSelection& sel) { return sel.volume->type() != new_type; }); + [&effective_new_type](const VolumeSelection& sel) { + return sel.volume->type() != effective_new_type(sel.volume); + }); if (!any_diff) return; + // --- Last-solid-part guard (pre-existing behavior) --- + // When converting away from MODEL_PART, ensure at least one solid part remains per object. if (new_type != ModelVolumeType::MODEL_PART) { std::map total_part_cnt; std::map selected_part_cnt; @@ -5800,14 +5937,36 @@ void ObjectList::set_volume_type(ModelVolumeType new_type) take_snapshot(_u8L("Change part type")); + // --- Apply type changes with Precise Seam group-aware repositioning --- + // Note: `changed_volumes` / `touched_objects` track every processed volume, including + // subtype-preservation no-ops. Tracking no-ops is intentional — it ensures such + // volumes remain selected after the post-apply rebuild. Without that, a cross-object + // mixed selection like [Part, PS_LEFT] clicking "Change type → Precise Seam" would + // silently deselect the preserved PS_LEFT: only the Part's object would enter + // touched_objects, and the final SetSelections(new_selection) would drop PS_LEFT. std::set changed_volumes; std::set touched_objects; for (const auto& sel : volumes) { - sel.volume->set_type(new_type); + const ModelVolumeType target = effective_new_type(sel.volume); + const ModelVolumeType old_type = sel.volume->type(); + + // Record the volume for reselection before the no-op short-circuit (see comment above). changed_volumes.insert(sel.volume); touched_objects.insert(sel.object_idx); + + if (old_type == target) + continue; // subtype-preservation no-op — nothing to write/move + + sel.volume->set_type(target); + + // If the change crosses a PS group boundary, move the volume to the end of volumes[] + // so the stable sort in reorder_volumes_and_get_selection() places it at the end of + // its new group (see precise_seam_group_changed() for details). + if (precise_seam_group_changed(old_type, target)) + move_volume_to_end((*m_objects)[sel.object_idx], sel.volume); } + // --- Rebuild selection to follow the changed volumes --- wxDataViewItemArray new_selection; for (int obj_idx : touched_objects) { wxDataViewItemArray sel_items = reorder_volumes_and_get_selection(obj_idx, [&changed_volumes](const ModelVolume* volume) { diff --git a/src/slic3r/GUI/GUI_ObjectList.hpp b/src/slic3r/GUI/GUI_ObjectList.hpp index 5705aa2c8b..2700dbc5d8 100644 --- a/src/slic3r/GUI/GUI_ObjectList.hpp +++ b/src/slic3r/GUI/GUI_ObjectList.hpp @@ -88,6 +88,7 @@ struct MeshErrorsInfo class ObjectList : public wxDataViewCtrl { public: + enum SELECTION_MODE { smUndef = 0, @@ -430,7 +431,12 @@ public: #if 0 // ORCA: disabled alongside definition in GUI_ObjectList.cpp (see #if 0 block there) void change_part_type(); #endif - void set_volume_type(ModelVolumeType new_type); + // preserve_ps_subtype = true: when new_type is PRECISE_SEAM_CENTER, volumes that are + // already Precise Seam keep their existing subtype (LEFT/RIGHT/etc.). Used by the + // generic "Change type → Precise Seam" entry where CENTER is a default fallback. + // preserve_ps_subtype = false: no preservation — target type is applied verbatim. Used + // by the "Precise Seam Type" subtype picker where the user explicitly wants CENTER. + void set_volume_type(ModelVolumeType new_type, bool preserve_ps_subtype = true); ModelVolumeType get_selected_volume_type(); void last_volume_is_deleted(const int obj_idx); diff --git a/src/slic3r/GUI/GUI_ObjectTable.cpp b/src/slic3r/GUI/GUI_ObjectTable.cpp index a496eca6d3..a7c761a06f 100644 --- a/src/slic3r/GUI/GUI_ObjectTable.cpp +++ b/src/slic3r/GUI/GUI_ObjectTable.cpp @@ -348,7 +348,8 @@ void GridCellFilamentsRenderer::Draw(wxGrid &grid, wxGridCellAttr &attr, wxDC &d if ((grid_row->model_volume_type != ModelVolumeType::NEGATIVE_VOLUME) && \ (grid_row->model_volume_type != ModelVolumeType::SUPPORT_BLOCKER) && \ (grid_row->model_volume_type != ModelVolumeType::SUPPORT_ENFORCER) && \ - (grid_row->model_volume_type != ModelVolumeType::PARAMETER_MODIFIER)) { + (grid_row->model_volume_type != ModelVolumeType::PARAMETER_MODIFIER) && \ + !is_precise_seam(grid_row->model_volume_type)) { // Precise Seam is non-printing helper geometry dc.DrawBitmap(*bitmap, wxPoint(rect.x + offset_x, rect.y + offset_y)); } else if (grid_row->model_volume_type == ModelVolumeType::PARAMETER_MODIFIER){ @@ -2764,12 +2765,12 @@ ObjectTablePanel::ObjectTablePanel( wxWindow* parent, wxWindowID id, const wxPoi //m_object_grid->AssignTable(m_object_grid_table); m_side_window = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(440),FromDIP(480)), wxVSCROLL); - m_side_window->SetScrollRate( 0, 5 ); + m_side_window->SetScrollRate(0, FromDIP(20)); m_page_sizer = new wxBoxSizer(wxVERTICAL); //m_page_top_sizer = new wxBoxSizer(wxHORIZONTAL); m_side_window->SetBackgroundColour(wxColour(0xff, 0xff, 0xff)); m_side_window->SetSizer(m_page_sizer); - m_side_window->SetScrollbars(1, 20, 1, 2); + m_side_window->SetScrollbars(1, FromDIP(20), 1, 2); //m_side_window->ShowScrollbars(wxSHOW_SB_NEVER, wxSHOW_SB_NEVER); //m_side_window->EnableScrolling(false, true); @@ -3011,7 +3012,8 @@ void ObjectTablePanel::load_data() if (col == ObjectGridTable::col_filaments) { if ((grid_row->model_volume_type != ModelVolumeType::NEGATIVE_VOLUME) && \ (grid_row->model_volume_type != ModelVolumeType::SUPPORT_BLOCKER) && \ - (grid_row->model_volume_type != ModelVolumeType::SUPPORT_ENFORCER)) { + (grid_row->model_volume_type != ModelVolumeType::SUPPORT_ENFORCER) && \ + !is_precise_seam(grid_row->model_volume_type)) { // Precise Seam is non-printing helper geometry GridCellFilamentsEditor* filament_editor = new GridCellFilamentsEditor(grid_col->choices, false, &m_color_bitmaps); m_object_grid->SetCellEditor(row, col, filament_editor); m_object_grid->SetCellRenderer(row, col, new GridCellFilamentsRenderer()); diff --git a/src/slic3r/GUI/GUI_Utils.cpp b/src/slic3r/GUI/GUI_Utils.cpp index 10dd29c9c1..5c55e341c9 100644 --- a/src/slic3r/GUI/GUI_Utils.cpp +++ b/src/slic3r/GUI/GUI_Utils.cpp @@ -247,7 +247,9 @@ int get_dpi_for_window(const wxWindow *window) const HDC hdc = GetDC(hwnd); if (hdc == NULL) { return DPI_DEFAULT; } - return GetDeviceCaps(hdc, LOGPIXELSX); + const int dpi = GetDeviceCaps(hdc, LOGPIXELSX); + ReleaseDC(hwnd, hdc); // GetDC's handle must be released, unlike GetWindowDC's + return dpi; } #elif defined __linux__ // TODO diff --git a/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp b/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp index 1009a6e89b..da26353eb6 100644 --- a/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp +++ b/src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp @@ -2000,7 +2000,7 @@ void GLGizmoEmboss::draw_model_type() if ((is_volume_move_inside || is_volume_move_outside)) process(); - // inspiration in ObjectList::change_part_type() + // inspiration in ObjectList::set_volume_type() // how to view correct side panel with objects ObjectList *obj_list = app.obj_list(); wxDataViewItemArray sel = obj_list->reorder_volumes_and_get_selection( diff --git a/src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp b/src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp index b30d399f98..94373391fa 100644 --- a/src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp +++ b/src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp @@ -2052,7 +2052,7 @@ void GLGizmoSVG::draw_model_type() if ((is_volume_move_inside || is_volume_move_outside)) process(); - // inspiration in ObjectList::change_part_type() + // inspiration in ObjectList::set_volume_type() // how to view correct side panel with objects ObjectList *obj_list = app.obj_list(); wxDataViewItemArray sel = obj_list->reorder_volumes_and_get_selection( diff --git a/src/slic3r/GUI/HMSPanel.cpp b/src/slic3r/GUI/HMSPanel.cpp index cd3d35bfc8..1268cb8f7b 100644 --- a/src/slic3r/GUI/HMSPanel.cpp +++ b/src/slic3r/GUI/HMSPanel.cpp @@ -122,7 +122,8 @@ HMSNotifyItem::HMSNotifyItem(const std::string& dev_id, wxWindow *parent, DevHMS m_hms_content->Bind(wxEVT_LEFT_UP, [this](wxMouseEvent& e) { wxCommandEvent evt(EVT_ALREADY_READ_HMS); evt.SetString(long_error_code); - wxPostEvent(wxGetApp().mainframe->m_monitor, evt); + if (MonitorPanel* monitor = MonitorPanel::if_built()) + wxPostEvent(monitor, evt); if (!m_url.empty()) wxLaunchDefaultBrowser(m_url); }); @@ -170,7 +171,7 @@ HMSPanel::HMSPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wx m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); m_scrolledWindow->SetBackgroundColour(*wxWHITE); - m_scrolledWindow->SetScrollRate(5, 5); + m_scrolledWindow->SetScrollRate(5, FromDIP(20)); m_top_sizer = new wxBoxSizer(wxVERTICAL); diff --git a/src/slic3r/GUI/IdleScheduler.cpp b/src/slic3r/GUI/IdleScheduler.cpp new file mode 100644 index 0000000000..18498fce0d --- /dev/null +++ b/src/slic3r/GUI/IdleScheduler.cpp @@ -0,0 +1,105 @@ +#include "IdleScheduler.hpp" + +#include + +#include +#include + +#include "libslic3r/Utils.hpp" + +#ifdef _WIN32 +#include +#endif + +namespace Slic3r { namespace GUI { + +namespace { + +// The timer's period while waiting for the user to go quiet. +constexpr int tick_ms = 250; +// Input-free time before a slice may start, about a double-click interval, so a user +// mid-gesture is left alone. +constexpr int quiet_ms = 500; +// Budget of one slice. The next slice is a timer message, so paint, timers and input +// queued meanwhile are handled first; a click waits at most a slice plus the unit that +// overran it. +constexpr int slice_ms = 40; +// Delay before the next slice; on GTK a due timer runs ahead of repaints and posted events, +// and wxOSX rejects a 0 ms timer. +constexpr int next_slice_ms = 5; + +// True when unhandled keyboard, button, touch or pen input is queued; only Windows can ask. +bool input_pending() +{ +#ifdef _WIN32 + // Windows synthesizes a mouse move whenever a window appears under the cursor, so those + // do not count. + return (GetQueueStatus(QS_INPUT & ~QS_MOUSEMOVE) >> 16) != 0; +#else + return false; +#endif +} + +// True inside a wxYield(), where a slice would build pages in the middle of the code that yielded. +bool yielding() +{ + const wxEventLoopBase* loop = wxEventLoopBase::GetActive(); + return loop != nullptr && loop->IsYielding(); +} + +} // namespace + +IdleScheduler::IdleScheduler(std::function input_idle_ms) : m_input_idle_ms(std::move(input_idle_ms)) +{ + m_timer.Bind(wxEVT_TIMER, [this](wxTimerEvent&) { tick(); }); +} + +void IdleScheduler::start() +{ + if (!m_timer.IsRunning()) + m_timer.Start(tick_ms); +} + +void IdleScheduler::stop() +{ + m_timer.Stop(); +} + +void IdleScheduler::tick() +{ + // A unit that pumps the event loop lets the timer fire inside its own slice. + if (m_in_slice) + return; + if (!m_queue.pending()) { + stop(); + return; + } + if (m_input_idle_ms() < quiet_ms || input_pending() || yielding()) { + start(); + return; + } + const auto now_ms = [] { + return std::chrono::duration_cast(std::chrono::steady_clock::now().time_since_epoch()).count(); + }; + const char* const fn = __FUNCTION__; + m_in_slice = true; + PrebuildQueue::Slice slice; + { + ScopeGuard in_slice([this] { m_in_slice = false; }); + slice = m_queue.run_slice(slice_ms, now_ms, input_pending, [fn](const std::string& name, long long ms) { + BOOST_LOG_TRIVIAL(debug) << fn << ": " << name << ": unit took " << ms << " ms"; + }); + } + if (slice.completed) + BOOST_LOG_TRIVIAL(info) << fn << ": task complete: " << slice.name << ", " << slice.units << " unit(s) in " << slice.ms << " ms this slice"; + else + BOOST_LOG_TRIVIAL(debug) << fn << ": " << slice.name << ": " << slice.units << " unit(s) in " << slice.ms << " ms, yielding"; + if (!slice.remaining) + stop(); + else if (input_pending()) + m_timer.Start(tick_ms); + else + m_timer.StartOnce(next_slice_ms); +} + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/IdleScheduler.hpp b/src/slic3r/GUI/IdleScheduler.hpp new file mode 100644 index 0000000000..7c31e9414c --- /dev/null +++ b/src/slic3r/GUI/IdleScheduler.hpp @@ -0,0 +1,41 @@ +#pragma once + +#include +#include + +#include +#include + +#include "PrebuildQueue.hpp" + +namespace Slic3r { namespace GUI { + +// Runs the queue's units while the user is idle. Once the user has been idle long enough, +// slices run one per timer message until the work is done or input arrives, so the event +// loop handles what it has between slices. Main thread only. +class IdleScheduler +{ +public: + // input_idle_ms reports how long ago the user last touched the mouse or keyboard. + explicit IdleScheduler(std::function input_idle_ms); + + void add(LazyBase& task) { m_queue.add(task); } + void clear() { m_queue.clear(); } + // The task names in queue order, for a log line. + std::string names() const { return m_queue.names(); } + + // Arms the timer; it stops itself once no task is pending, so call again when a task + // appears. + void start(); + void stop(); + +private: + void tick(); + + PrebuildQueue m_queue; + wxTimer m_timer; + std::function m_input_idle_ms; + bool m_in_slice{ false }; +}; + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/Jobs/ArrangeJob.cpp b/src/slic3r/GUI/Jobs/ArrangeJob.cpp index c0cc7bdb5a..438bda2cc2 100644 --- a/src/slic3r/GUI/Jobs/ArrangeJob.cpp +++ b/src/slic3r/GUI/Jobs/ArrangeJob.cpp @@ -13,6 +13,7 @@ #include "slic3r/GUI/NotificationManager.hpp" #include "slic3r/GUI/format.hpp" #include "slic3r/GUI/GUI_ObjectList.hpp" +#include "slic3r/plugin/PluginManager.hpp" #include "libnest2d/common.hpp" @@ -698,6 +699,13 @@ void ArrangeJob::finalize(bool canceled, std::exception_ptr &eptr) { BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(":arrange m_unprintable: name: %4%, bed_id %1%, trans {%2%,%3%}") % ap.bed_idx % unscale(ap.translation(X)) % unscale(ap.translation(Y)) % ap.name; } + { + Slic3r::LifecycleEventContext ctx; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + ctx.msg = "arranged"; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectTransformed, ctx); + } + m_plater->update(); // BBS //wxGetApp().obj_manipul()->set_dirty(); diff --git a/src/slic3r/GUI/Jobs/FillBedJob.cpp b/src/slic3r/GUI/Jobs/FillBedJob.cpp index 5364cb5648..961b8af566 100644 --- a/src/slic3r/GUI/Jobs/FillBedJob.cpp +++ b/src/slic3r/GUI/Jobs/FillBedJob.cpp @@ -6,6 +6,7 @@ #include "slic3r/GUI/Plater.hpp" #include "slic3r/GUI/GLCanvas3D.hpp" #include "slic3r/GUI/GUI_ObjectList.hpp" +#include "slic3r/plugin/PluginManager.hpp" #include "libnest2d/common.hpp" #include @@ -347,6 +348,13 @@ void FillBedJob::finalize(bool canceled, std::exception_ptr &eptr) m_plater->arrange(); } m_plater->update(); + + { + Slic3r::LifecycleEventContext ctx; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + ctx.msg = "arranged"; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectTransformed, ctx); + } } m_plater->mark_plate_toolbar_image_dirty(); diff --git a/src/slic3r/GUI/Jobs/OrientJob.cpp b/src/slic3r/GUI/Jobs/OrientJob.cpp index ee8ea875c0..ed9117e8bf 100644 --- a/src/slic3r/GUI/Jobs/OrientJob.cpp +++ b/src/slic3r/GUI/Jobs/OrientJob.cpp @@ -5,6 +5,7 @@ #include "slic3r/GUI/GUI.hpp" #include "slic3r/GUI/GUI_App.hpp" #include "slic3r/GUI/NotificationManager.hpp" +#include "slic3r/plugin/PluginManager.hpp" #include "libslic3r/PresetBundle.hpp" @@ -254,6 +255,12 @@ void OrientJob::finalize(bool canceled, std::exception_ptr &eptr) mesh.apply(); } + if (!m_selected.empty()) { + Slic3r::LifecycleEventContext ctx; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + ctx.msg = "auto_oriented"; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectTransformed, ctx); + } m_plater->update(); diff --git a/src/slic3r/GUI/Jobs/PrintJob.cpp b/src/slic3r/GUI/Jobs/PrintJob.cpp index dae05494e3..76e45eb1d7 100644 --- a/src/slic3r/GUI/Jobs/PrintJob.cpp +++ b/src/slic3r/GUI/Jobs/PrintJob.cpp @@ -1,4 +1,5 @@ #include "PrintJob.hpp" +#include "libslic3r/LifecycleEvents.hpp" #include "libslic3r/MTUtils.hpp" #include "libslic3r/Model.hpp" #include "libslic3r/PresetBundle.hpp" @@ -152,6 +153,18 @@ void PrintJob::process(Ctl &ctl) int result = -1; std::string http_body; + const auto mark_lifecycle_started = [this]() { + if (m_lifecycle_started) + return; + + LifecycleEventContext start_ctx; + start_ctx.name = m_project_name; + start_ctx.device_id = m_dev_id; + start_ctx.source = "print_job"; + fire_lifecycle_event(LifecycleEvent::PrintJobStarted, start_ctx); + m_lifecycle_started = true; + }; + int total_plate_num = plate_data.plate_count; if (!plate_data.is_valid) { total_plate_num = m_plater->get_partplate_list().get_plate_count(); @@ -173,7 +186,7 @@ void PrintJob::process(Ctl &ctl) } } - m_project_name = truncate_string(m_project_name, 100); + const std::string transport_project_name = truncate_string(m_project_name, 100); int curr_plate_idx = 0; if (m_print_type == "from_normal") { @@ -372,11 +385,11 @@ void PrintJob::process(Ctl &ctl) } } - if (params.preset_name.empty() && m_print_type == "from_normal") { params.preset_name = wxString::Format("%s_plate_%d", m_project_name, curr_plate_idx).ToStdString(); } - if (params.project_name.empty()) {params.project_name = m_project_name;} + if (params.preset_name.empty() && m_print_type == "from_normal") { params.preset_name = wxString::Format("%s_plate_%d", transport_project_name, curr_plate_idx).ToStdString(); } + if (params.project_name.empty()) {params.project_name = transport_project_name;} if (m_is_calibration_task) { - params.project_name = m_project_name; + params.project_name = transport_project_name; params.origin_model_id = ""; } @@ -543,6 +556,7 @@ void PrintJob::process(Ctl &ctl) if (m_print_type == "from_sdcard_view") { BOOST_LOG_TRIVIAL(info) << "print_job: try to send with cloud, model is sdcard view"; ctl.update_status(curr_percent, _u8L("Sending print job through cloud service")); + mark_lifecycle_started(); result = m_agent->start_sdcard_print(params, update_fn, cancel_fn); } else if (params.connection_type != "lan") { if (params.dev_ip.empty()) @@ -566,6 +580,7 @@ void PrintJob::process(Ctl &ctl) BOOST_LOG_TRIVIAL(info) << "print_job: use ftp send print only"; ctl.update_status(curr_percent, _u8L("Sending print job over LAN")); is_try_lan_mode = true; + mark_lifecycle_started(); result = m_agent->start_local_print_with_record(params, update_fn, cancel_fn, wait_fn); if (result < 0) { error_text = wxString::Format(_L("Access code:%s IP address:%s"), params.password, params.dev_ip); @@ -582,6 +597,7 @@ void PrintJob::process(Ctl &ctl) // try to send local with record BOOST_LOG_TRIVIAL(info) << "print_job: try to start local print with record"; ctl.update_status(curr_percent, _u8L("Sending print job over LAN")); + mark_lifecycle_started(); result = m_agent->start_local_print_with_record(params, update_fn, cancel_fn, wait_fn); if (result == 0) { params.comments = ""; @@ -597,18 +613,21 @@ void PrintJob::process(Ctl &ctl) // try to send with cloud BOOST_LOG_TRIVIAL(warning) << "print_job: try to send with cloud"; ctl.update_status(curr_percent, _u8L("Sending print job through cloud service")); + // Started was already emitted before the local attempt. result = m_agent->start_print(params, update_fn, cancel_fn, wait_fn); } } else { BOOST_LOG_TRIVIAL(info) << "print_job: send with cloud"; ctl.update_status(curr_percent, _u8L("Sending print job through cloud service")); + mark_lifecycle_started(); result = m_agent->start_print(params, update_fn, cancel_fn, wait_fn); } } } else { if (this->could_emmc_print) { ctl.update_status(curr_percent, _u8L("Sending print job over LAN")); + mark_lifecycle_started(); result = m_agent->start_local_print(params, update_fn, cancel_fn); } else { switch(this->sdcard_state) { @@ -619,6 +638,7 @@ void PrintJob::process(Ctl &ctl) if(this->has_sdcard) { // means the storage is abnormal but can be used option is enabled ctl.update_status(curr_percent, _u8L("Sending print job over LAN, but the Storage in the printer is abnormal and print-issues may be caused by this.")); + mark_lifecycle_started(); result = m_agent->start_local_print(params, update_fn, cancel_fn); break; } @@ -629,6 +649,7 @@ void PrintJob::process(Ctl &ctl) return; case DevStorage::SdcardState::HAS_SDCARD_NORMAL: ctl.update_status(curr_percent, _u8L("Sending print job over LAN")); + mark_lifecycle_started(); result = m_agent->start_local_print(params, update_fn, cancel_fn); break; default: @@ -686,6 +707,7 @@ void PrintJob::process(Ctl &ctl) } wxQueueEvent(m_plater, evt); m_job_finished = true; + m_lifecycle_success = true; } } @@ -698,6 +720,19 @@ void PrintJob::finalize(bool canceled, std::exception_ptr &eptr) { eptr = std::current_exception(); } + if (m_lifecycle_started && !m_lifecycle_finished) { + LifecycleEventContext finish_ctx; + finish_ctx.name = m_project_name; + finish_ctx.device_id = m_dev_id; + finish_ctx.source = "print_job"; + finish_ctx.code = canceled ? LifecycleEvtCode::Warn : + (eptr || !m_lifecycle_success ? LifecycleEvtCode::Error : LifecycleEvtCode::Ok); + finish_ctx.msg = canceled ? "cancelled" : (eptr ? "exception" : + (m_lifecycle_success ? "" : "failed")); + fire_lifecycle_event(LifecycleEvent::PrintJobFinished, finish_ctx); + m_lifecycle_finished = true; + } + if (canceled || eptr) return; } diff --git a/src/slic3r/GUI/Jobs/PrintJob.hpp b/src/slic3r/GUI/Jobs/PrintJob.hpp index 9a23b04054..4be68031d9 100644 --- a/src/slic3r/GUI/Jobs/PrintJob.hpp +++ b/src/slic3r/GUI/Jobs/PrintJob.hpp @@ -43,6 +43,9 @@ class PrintJob : public Job std::function m_success_fun{nullptr}; std::string m_dev_id; bool m_job_finished{ false }; + bool m_lifecycle_started{ false }; + bool m_lifecycle_finished{ false }; + bool m_lifecycle_success{ false }; int m_print_job_completed_id = 0; wxString m_completed_evt_data; std::function m_enter_ip_address_fun_fail{ nullptr }; diff --git a/src/slic3r/GUI/Jobs/SendJob.cpp b/src/slic3r/GUI/Jobs/SendJob.cpp index d27b18f24b..505475e4a9 100644 --- a/src/slic3r/GUI/Jobs/SendJob.cpp +++ b/src/slic3r/GUI/Jobs/SendJob.cpp @@ -1,4 +1,5 @@ #include "SendJob.hpp" +#include "libslic3r/LifecycleEvents.hpp" #include "slic3r/GUI/I18N.hpp" #include "slic3r/Utils/NetworkAgent.hpp" #include "libslic3r/MTUtils.hpp" @@ -148,6 +149,13 @@ void SendJob::process(Ctl &ctl) } } + LifecycleEventContext start_ctx; + start_ctx.name = m_project_name; + start_ctx.device_id = m_dev_id; + start_ctx.source = "send_job"; + fire_lifecycle_event(LifecycleEvent::SendJobStarted, start_ctx); + m_lifecycle_started = true; + int total_plate_num = m_plater->get_partplate_list().get_plate_count(); PartPlate* plate = m_plater->get_partplate_list().get_plate(job_data.plate_idx); @@ -424,6 +432,19 @@ void SendJob::finalize(bool canceled, std::exception_ptr &eptr) eptr = std::current_exception(); } + if (m_lifecycle_started && !m_lifecycle_finished) { + LifecycleEventContext finish_ctx; + finish_ctx.name = m_project_name; + finish_ctx.device_id = m_dev_id; + finish_ctx.source = "send_job"; + finish_ctx.code = canceled ? LifecycleEvtCode::Warn : + (eptr ? LifecycleEvtCode::Error : (m_job_finished ? LifecycleEvtCode::Ok : LifecycleEvtCode::Error)); + finish_ctx.msg = canceled ? "cancelled" : (eptr ? "exception" : + (m_job_finished ? "" : "failed")); + fire_lifecycle_event(LifecycleEvent::SendJobFinished, finish_ctx); + m_lifecycle_finished = true; + } + if (canceled || eptr) return; } diff --git a/src/slic3r/GUI/Jobs/SendJob.hpp b/src/slic3r/GUI/Jobs/SendJob.hpp index 1d4e025d6e..86d180ac8c 100644 --- a/src/slic3r/GUI/Jobs/SendJob.hpp +++ b/src/slic3r/GUI/Jobs/SendJob.hpp @@ -22,6 +22,8 @@ class SendJob : public Job PrintPrepareData job_data; std::string m_dev_id; bool m_job_finished{ false }; + bool m_lifecycle_started{ false }; + bool m_lifecycle_finished{ false }; int m_print_job_completed_id = 0; bool m_is_check_mode{false}; bool m_check_and_continue{false}; diff --git a/src/slic3r/GUI/KBShortcutsDialog.cpp b/src/slic3r/GUI/KBShortcutsDialog.cpp index c03d331627..63580387a7 100644 --- a/src/slic3r/GUI/KBShortcutsDialog.cpp +++ b/src/slic3r/GUI/KBShortcutsDialog.cpp @@ -159,8 +159,12 @@ void KBShortcutsDialog::fill_pages() if (wxGetApp().is_editor()) { page(_L("Global"), _L("Available anywhere in the window, even while typing in a text field."), ShortcutContext::Global, { - fixed(Section::Application, { alt, "1-9, 0" }, L("Run a speed dial favorite while the dial is open")), + fixed(Section::SpeedDial, { alt, "1-9, 0" }, L("Run favorite 1 to 10")), + fixed(Section::SpeedDial, { ctrl, "B" }, L("Pin or unpin the selected action")), + // wx cycles notebook pages on Ctrl+Tab, which is Cmd+Tab on macOS and never arrives there. +#ifndef __APPLE__ fixed(Section::Application, { ctrl, key(L_CONTEXT("Tab", "Keyboard Shortcut")) }, L("Switch to the next main tab")), +#endif }); page(_L("Prepare"), _L("Available while the 3D view on the Prepare tab has focus."), ShortcutContext::Plater, { @@ -207,7 +211,7 @@ wxPanel* KBShortcutsDialog::create_page(wxWindow* parent, const Page& page) wxGetApp().UpdateDarkUI(scrollable_panel); const wxColour page_colour = StateColor::darkModeColorFor(*wxWHITE); scrollable_panel->SetBackgroundColour(page_colour); - scrollable_panel->SetScrollRate(0, 20); + scrollable_panel->SetScrollRate(0, FromDIP(20)); const int page_width = FromDIP(PAGE_WIDTH); scrollable_panel->SetInitialSize(wxSize(page_width, FromDIP(450))); @@ -454,7 +458,10 @@ ShortcutCaptureDialog::ShortcutCaptureDialog(wxWindow* parent, Shortcut shortcut capture_sizer->Add(m_chord_label, 0, wxALIGN_CENTER); capture_sizer->AddStretchSpacer(); capture->SetSizer(capture_sizer); - capture->Bind(wxEVT_KEY_DOWN, &ShortcutCaptureDialog::on_key, this); + capture->Layout(); // the box is created at its final size, so nothing resizes it into laying the sizer out + // The hook runs before the window procedure, so Windows does not open its window menu + // over the dialog on Alt+Space. + Bind(wxEVT_CHAR_HOOK, &ShortcutCaptureDialog::on_key, this); capture->Bind(wxEVT_CHAR, &ShortcutCaptureDialog::on_char, this); capture->Bind(wxEVT_LEFT_DOWN, [capture](wxMouseEvent&) { capture->SetFocus(); }); sizer->Add(capture, 0, wxLEFT | wxRIGHT | wxEXPAND, FromDIP(20)); @@ -531,10 +538,12 @@ void ShortcutCaptureDialog::record(const KeyChord& chord) m_ok->Enable(false); }; const bool global = (shortcut_info(m_shortcut).contexts & context_bit(ShortcutContext::Global)) != 0; - if (global && !chord.is_menu_accelerator()) { + if (chord.is_system_shortcut()) { + reject(_L("The system uses this shortcut, so it cannot be assigned.")); + } else if (global && !chord.is_menu_accelerator()) { reject(m_rejection); } else if (const std::optional owner = wxGetApp().shortcuts().step_owner(m_shortcut, chord); owner.has_value()) { - reject(wxString::Format(_L("Already used as a step of %s."), _(shortcut_info(*owner).name))); + reject(wxString::Format(_L("Shift and Ctrl with this key belong to %s and cannot be assigned."), _(shortcut_info(*owner).name))); } else { m_conflicts = wxGetApp().shortcuts().conflicts(m_shortcut, chord); m_status->SetForegroundColour(m_status_colour); diff --git a/src/slic3r/GUI/KeyChord.cpp b/src/slic3r/GUI/KeyChord.cpp index cd746d2f92..f6aeacd3ce 100644 --- a/src/slic3r/GUI/KeyChord.cpp +++ b/src/slic3r/GUI/KeyChord.cpp @@ -182,6 +182,16 @@ bool KeyChord::is_menu_accelerator() const return valid() && ((modifiers & (wxMOD_CONTROL | wxMOD_ALT | wxMOD_RAW_CONTROL)) != 0 || (!is_printable(key) && key != WXK_SPACE)); } +// Only a chord the desktop acts on while still delivering it to the app belongs here. +bool KeyChord::is_system_shortcut() const +{ +#ifdef _WIN32 + return modifiers == wxMOD_ALT && (key == WXK_F4 || key == WXK_SPACE); +#else + return false; +#endif +} + std::string KeyChord::to_string() const { if (!valid()) diff --git a/src/slic3r/GUI/KeyChord.hpp b/src/slic3r/GUI/KeyChord.hpp index c7884409eb..c2cfb88883 100644 --- a/src/slic3r/GUI/KeyChord.hpp +++ b/src/slic3r/GUI/KeyChord.hpp @@ -34,6 +34,9 @@ struct KeyChord // True when Ctrl or Alt is held or the key is non-printable, the chords a menu can own without // swallowing typing in text fields. bool is_menu_accelerator() const; + // True for a chord the desktop acts on although the app receives it, so a binding would + // take it from the system. + bool is_system_shortcut() const; // Platform-neutral text ("Ctrl+Shift+S") for persistence and wx accelerator strings. std::string to_string() const; diff --git a/src/slic3r/GUI/Lazy.cpp b/src/slic3r/GUI/Lazy.cpp new file mode 100644 index 0000000000..2a1a74510a --- /dev/null +++ b/src/slic3r/GUI/Lazy.cpp @@ -0,0 +1,27 @@ +#include "Lazy.hpp" + +#include +#include +#include + +namespace Slic3r { namespace GUI { + +LazyBase::OnDemandBuild::OnDemandBuild(const LazyBase& lazy) : m_lazy(lazy), m_started(std::chrono::steady_clock::now()) +{ + // The unit tests have no app. + if (wxTheApp != nullptr) + m_busy = std::make_unique(); +} + +LazyBase::OnDemandBuild::~OnDemandBuild() +{ + BOOST_LOG_TRIVIAL(info) << "Lazy::ensure: built " << m_lazy.name() << " on demand, " << m_units << " unit(s) in " + << std::chrono::duration_cast(std::chrono::steady_clock::now() - m_started).count() << " ms"; +} + +void LazyBase::log_null_factory(const std::string& name) +{ + BOOST_LOG_TRIVIAL(error) << "Lazy::build_step: the factory for " << name << " returned null"; +} + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/Lazy.hpp b/src/slic3r/GUI/Lazy.hpp new file mode 100644 index 0000000000..33e092d887 --- /dev/null +++ b/src/slic3r/GUI/Lazy.hpp @@ -0,0 +1,198 @@ +#pragma once + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "StagedBuild.hpp" + +class wxBusyCursor; + +// Deferred construction of one object. Lazy holds the factory and builds the object on +// demand or, unit by unit, from an IdleScheduler; LazyBase is what the scheduler sees of +// it; LazyInstance gives a type with one such object app-wide static access to it. +// docs/HLSD/deferred-page-construction.md covers the design. + +namespace Slic3r { namespace GUI { + +template class LazyInstance; + +// A prebuild task: what PrebuildQueue sees of a Lazy. A type with its own unit sequence +// implements it directly. +class LazyBase +{ +public: + virtual ~LazyBase() = default; + + // Labels the object in logs. + virtual const std::string& name() const = 0; + virtual bool built() const = 0; + // Whether the idle prebuild has work here. + virtual bool pending() const { return !built(); } + // Runs one unit and returns true while more remain. + virtual bool build_step() = 0; + // Position in the idle queue: lower builds first, negative is never prebuilt. + virtual int prebuild_order() const = 0; + +protected: + // Busy cursor around a build the user is waiting on, and a log line after it. + class OnDemandBuild + { + public: + explicit OnDemandBuild(const LazyBase& lazy); + ~OnDemandBuild(); + void unit() { ++m_units; } + + private: + const LazyBase& m_lazy; + std::unique_ptr m_busy; + std::chrono::steady_clock::time_point m_started; + int m_units{ 0 }; + }; + + static void log_null_factory(const std::string& name); +}; + +// Holds an object a factory makes on the first build_step() or ensure(), followed by one +// StagedBuild step per unit if the type has them, and keeps callbacks until the object is +// complete. The object's parent owns it, not the holder. A LazyInstance type is registered +// for its statics; any other type is reached only through the holder. +template +class Lazy : public LazyBase +{ +public: + using Factory = std::function; + + Lazy(std::string name, int order, Factory make) : m_name(std::move(name)), m_order(order), m_make(std::move(make)) + { + if constexpr (registered()) + LazyInstance::s_lazy = this; + } + ~Lazy() override + { + if constexpr (registered()) + if (LazyInstance::s_lazy == this) + LazyInstance::s_lazy = nullptr; + } + Lazy(const Lazy&) = delete; + Lazy& operator=(const Lazy&) = delete; + + // Null until completely built. + T* get() const { return built() ? m_object : nullptr; } + + // Builds whatever is left now and returns the object, null if the factory returned null + // or a nested call finds the object mid-build. + T* ensure() + { + if (!built() && !m_building) { + OnDemandBuild build(*this); + do + build.unit(); + while (build_step()); + } + return get(); + } + + // Runs fn on the object now if it is built, otherwise once it is. + void when_built(std::function fn) + { + if (built()) + fn(*m_object); + else + m_deferred.push_back(std::move(fn)); + } + + const std::string& name() const override { return m_name; } + // Read by a worker thread through the statics; the last write in build_step() releases it. + bool built() const override { return m_complete.load(std::memory_order_acquire); } + bool pending() const override { return !built() && !m_failed; } + int prebuild_order() const override { return m_order; } + + // The factory is the first unit, then one StagedBuild step each. A unit that pumps the + // event loop cannot re-enter; a nested call does nothing. + bool build_step() override + { + if (built() || m_building || m_failed) + return false; + m_building = true; + try { + if (m_object == nullptr) + m_object = m_make(); + else + step(); + } catch (...) { + m_building = false; + throw; + } + m_building = false; + if (m_object == nullptr) { + m_failed = true; + log_null_factory(m_name); + return false; + } + if (steps_remain()) + return true; + m_complete.store(true, std::memory_order_release); + for (auto& fn : m_deferred) + fn(*m_object); + m_deferred.clear(); + return false; + } + +private: + static constexpr bool registered() { return std::is_base_of_v, T>; } + static constexpr bool staged() { return std::is_base_of_v; } + + bool steps_remain() const + { + if constexpr (staged()) + return !m_object->built(); + else + return false; + } + void step() + { + if constexpr (staged()) + m_object->build_step(); + } + + std::string m_name; + int m_order; + Factory m_make; + T* m_object{ nullptr }; + std::atomic m_complete{ false }; + bool m_building{ false }; + bool m_failed{ false }; + std::vector> m_deferred; +}; + +// Mixin for a type with one lazily built instance in the app. The statics reach that +// instance through its Lazy holder (a recreated MainFrame's holder replaces the old +// frame's). +template +class LazyInstance +{ +public: + // Null until completely built. + static Self* if_built() { return s_lazy ? s_lazy->get() : nullptr; } + // Builds the object if needed; null while no holder exists or the holder has no + // object. + static Self* ensure() { return s_lazy ? s_lazy->ensure() : nullptr; } + // Runs fn on the object now if it is built, otherwise once it is. + static void when_built(std::function fn) + { + if (s_lazy) + s_lazy->when_built(std::move(fn)); + } + +private: + friend class Lazy; + inline static Lazy* s_lazy{ nullptr }; +}; + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/LazyPage.cpp b/src/slic3r/GUI/LazyPage.cpp new file mode 100644 index 0000000000..d14947bd80 --- /dev/null +++ b/src/slic3r/GUI/LazyPage.cpp @@ -0,0 +1,14 @@ +#include "LazyPage.hpp" + +#include "GUI_App.hpp" + +namespace Slic3r { namespace GUI { + +void apply_dark_ui_to_lazy_panel(wxWindow* panel) +{ +#ifdef _MSW_DARK_MODE + wxGetApp().UpdateDarkUIWin(panel); +#endif +} + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/LazyPage.hpp b/src/slic3r/GUI/LazyPage.hpp new file mode 100644 index 0000000000..fc85f69285 --- /dev/null +++ b/src/slic3r/GUI/LazyPage.hpp @@ -0,0 +1,77 @@ +#pragma once + +#include +#include +#include + +#include +#include +#include + +#include "Lazy.hpp" + +namespace Slic3r { namespace GUI { + +// Applies the app's dark-mode pass to a panel built after the frame's own pass ran. +void apply_dark_ui_to_lazy_panel(wxWindow* panel); + +// A page whose panel is built the first time the page is shown, or earlier by an +// IdleScheduler; nothing builds while the frame is still hidden. The Lazy side holds the +// panel and, for a LazyInstance panel type, registers it for the type's statics. +template +class LazyPage : public wxPanel, public Lazy +{ +public: + using Factory = std::function; + + LazyPage(wxWindow* parent, std::string name, int order, Factory make = [](wxWindow* parent) { return new Panel(parent); }) + : wxPanel(parent), Lazy(std::move(name), order, [this, make = std::move(make)] { + Panel* panel = make(this); + GetSizer()->Add(panel, 1, wxEXPAND); + // Hidden while its page is, as an inserted page would be. + if (!IsShown()) + panel->Hide(); + return panel; + }) + { + SetSizer(new wxBoxSizer(wxVERTICAL)); + // Shown by the book when its tab is selected. + Hide(); + this->when_built([this](Panel& panel) { + apply_dark_ui_to_lazy_panel(&panel); + Layout(); + }); + } + + // The parent book currently lists this page. + bool in_book() const + { + auto* book = dynamic_cast(GetParent()); + return book != nullptr && book->FindPage(this) != wxNOT_FOUND; + } + + // Pending only while the tab is in the book. + bool pending() const override { return in_book() && Lazy::pending(); } + + // Forwarded so the panel's own Show() override stays its activation hook; wx calls this + // virtual from the book's ShowWithEffect() only for wxSHOW_EFFECT_NONE, the default. + bool Show(bool show = true) override + { + const bool changed = wxPanel::Show(show); + if (show) { + // The book shows its first page as it is inserted, before startup has chosen the + // start page, so a hidden frame builds nothing; MainFrame::Show() completes it. + if (this->built() || wxGetTopLevelParent(this)->IsShown()) { + if (Panel* panel = this->ensure()) + panel->Show(true); + // The sizer skipped the panel while the book kept it hidden. + Layout(); + } + } else if (Panel* panel = this->get()) { + panel->Show(false); + } + return changed; + } +}; + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/MainFrame.cpp b/src/slic3r/GUI/MainFrame.cpp index ec82786432..a57dbf0b97 100644 --- a/src/slic3r/GUI/MainFrame.cpp +++ b/src/slic3r/GUI/MainFrame.cpp @@ -81,6 +81,7 @@ #ifdef __WXGTK__ #include +#include #endif // __WXGTK__ #include @@ -317,7 +318,8 @@ DPIFrame(NULL, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, BORDERLESS_FRAME_ // BBS , m_recent_projects(18) , m_settings_dialog(this) - , diff_dialog(this) + , m_idle([] { return wxGetApp().input_idle_ms(); }) + , m_diff_dialog("compare_presets", 100, [this] { return make_diff_dialog(); }) { #ifdef __WXOSX__ set_miniaturizable(GetHandle()); @@ -509,6 +511,9 @@ DPIFrame(NULL, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, BORDERLESS_FRAME_ wxQueueEvent(wxGetApp().plater(), new SimpleEvent(EVT_NOTICE_CHILDE_SIZE_CHANGED)); fit_tab_labels(); // ORCA on resize + // Restarts the idle build so a hidden Prepare page is laid out at the new size. + if (m_prebuild_started) + m_idle.start(); }); //BBS @@ -737,9 +742,6 @@ DPIFrame(NULL, wxID_ANY, "", wxDefaultPosition, wxDefaultSize, BORDERLESS_FRAME_ wxGetApp().persist_window_geometry(this, true); wxGetApp().persist_window_geometry(&m_settings_dialog, true); - // bind events from DiffDlg - - bind_diff_dialog(); } bool MainFrame::handle_global_shortcut(const KeyChord& chord) @@ -832,8 +834,10 @@ bool MainFrame::handle_global_shortcut(const KeyChord& chord) return true; } -void MainFrame::bind_diff_dialog() +DiffPresetDialog* MainFrame::make_diff_dialog() { + auto* dialog = new DiffPresetDialog(this); + auto get_tab = [](Preset::Type type) { Tab* null_tab = nullptr; for (Tab* tab : wxGetApp().tabs_list) @@ -842,23 +846,24 @@ void MainFrame::bind_diff_dialog() return null_tab; }; - auto transfer = [this, get_tab](Preset::Type type) { - get_tab(type)->transfer_options(diff_dialog.get_left_preset_name(type), - diff_dialog.get_right_preset_name(type), - diff_dialog.get_selected_options(type)); + auto transfer = [dialog, get_tab](Preset::Type type) { + get_tab(type)->transfer_options(dialog->get_left_preset_name(type), + dialog->get_right_preset_name(type), + dialog->get_selected_options(type)); }; - auto process_options = [this](std::function process) { - const Preset::Type diff_dlg_type = diff_dialog.view_type(); + auto process_options = [dialog](std::function process) { + const Preset::Type diff_dlg_type = dialog->view_type(); if (diff_dlg_type == Preset::TYPE_INVALID) { - for (const Preset::Type& type : diff_dialog.types_list() ) + for (const Preset::Type& type : dialog->types_list() ) process(type); } else process(diff_dlg_type); }; - diff_dialog.Bind(EVT_DIFF_DIALOG_TRANSFER, [process_options, transfer](SimpleEvent&) { process_options(transfer); }); + dialog->Bind(EVT_DIFF_DIALOG_TRANSFER, [process_options, transfer](SimpleEvent&) { process_options(transfer); }); + return dialog; } @@ -1186,9 +1191,12 @@ void MainFrame::update_edge_panels() void MainFrame::shutdown() { BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << "MainFrame::shutdown enter"; - if (m_project != nullptr) - m_project->shutdown(); + m_idle.stop(); + if (ProjectPanel* project = ProjectPanel::if_built()) + project->shutdown(); m_plugin_pages.shutdown(); + if (m_plater != nullptr) + m_plater->remove_dock_panes(); #ifdef __WXGTK__ // Edge panels are child windows — wxWidgets destroys them automatically. m_edge_bottom = nullptr; @@ -1312,19 +1320,6 @@ void MainFrame::show_option(bool show) } } -#ifdef SLIC3R_CAD -DesignPanel* MainFrame::ensure_design_panel() -{ - if (m_design_panel == nullptr && m_design_page != nullptr) { - wxBusyCursor busy; - m_design_panel = new DesignPanel(m_design_page); - m_design_page->GetSizer()->Add(m_design_panel, 1, wxEXPAND); - m_design_page->Layout(); - } - return m_design_panel; -} -#endif - void MainFrame::init_tabpanel() { // wxNB_NOPAGETHEME: Disable Windows Vista theme for the Notebook background. The theme performance is terrible on // Windows 10 with multiple high resolution displays connected. @@ -1367,23 +1362,20 @@ void MainFrame::init_tabpanel() { // m_param_panel->OnActivate(); #ifdef SLIC3R_CAD else if (m_design_page != nullptr && panel == m_design_page) { - // Built on first activation, never at startup: the panel creates several hundred - // controls and its own GL canvas, which a user who does not open the tab should - // not pay for. - ensure_design_panel(); // Re-sync the Design bed to the active printer: the panel is built before the // printer profile is fully applied, so its bed must refresh on activation or the // grid (true bed) spills past the stale default bed quad. - m_design_panel->on_tab_shown(); + DesignPanel::ensure()->on_tab_shown(); } #endif - else if (panel == m_monitor) { + else if (panel == m_monitor_page) { //monitor } #ifdef SLIC3R_CAD // Any page that is not Design takes the Design status line down with it — see // DesignPanel::on_tab_hidden for why the popup does not follow the page on its own. - if (m_design_panel != nullptr && panel != m_design_page) m_design_panel->on_tab_hidden(); + if (DesignPanel* design = DesignPanel::if_built(); design != nullptr && panel != m_design_page) + design->on_tab_hidden(); #endif #ifndef __APPLE__ if (m_last_selected_tab == TAB_ID_PREPARE) { @@ -1399,13 +1391,14 @@ void MainFrame::init_tabpanel() { }); if (wxGetApp().is_editor()) { - m_webview = new WebViewPanel(m_tabpanel); + m_home_page = new LazyPage(m_tabpanel, TAB_ID_HOME, 10); + m_lazy_pages.push_back(m_home_page); Bind(EVT_LOAD_URL, [this](wxCommandEvent &evt) { wxString url = evt.GetString(); select_tab(TAB_ID_HOME); - m_webview->load_url(url); + WebViewPanel::ensure()->load_url(url); }); - m_tabpanel->AddPage(TAB_ID_HOME, m_webview, "", "tab_home_active"); + m_tabpanel->AddPage(TAB_ID_HOME, m_home_page, "", "tab_home_active"); m_param_panel = new ParamsPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxBK_LEFT | wxTAB_TRAVERSAL); } @@ -1416,15 +1409,13 @@ void MainFrame::init_tabpanel() { wxGetApp().plater_ = m_plater; #ifdef SLIC3R_CAD - // Stand-in page for the Design tab. The real DesignPanel is built into it the first time - // the tab is selected (see the page-changed handler above), so nothing it constructs sits - // on the startup path. The experimental feature is off by default, and when it is off the - // page is never created, so the tab does not appear at all (the preference takes effect on - // the next start, like the other feature toggles). + // The experimental feature is off by default, and when it is off the page is never + // created, so the tab does not appear at all (the preference takes effect on the next + // start, like the other feature toggles). if (wxGetApp().is_enable_cad_feature()) { - m_design_page = new wxPanel(this); - m_design_page->SetSizer(new wxBoxSizer(wxVERTICAL)); - m_design_page->Hide(); + // Experimental and heavy enough that building it unasked would cost more than it saves. + m_design_page = new LazyPage(this, TAB_ID_DESIGN, -1); + m_lazy_pages.push_back(m_design_page); start_mcp_control_if_enabled(); // opens the MCP socket iff ORCA_CAD_MCP is set } #endif @@ -1432,33 +1423,41 @@ void MainFrame::init_tabpanel() { create_preset_tabs(); //BBS add pages - m_monitor = new MonitorPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_monitor->SetBackgroundColour(*wxWHITE); - m_tabpanel->AddPage(TAB_ID_MONITOR, m_monitor, _L("Device"), "tab_monitor_active"); + m_monitor_page = new LazyPage(m_tabpanel, TAB_ID_MONITOR, 20); + m_lazy_pages.push_back(m_monitor_page); + m_tabpanel->AddPage(TAB_ID_MONITOR, m_monitor_page, _L("Device"), "tab_monitor_active"); - m_printer_view = new PrinterWebView(m_tabpanel); + m_printer_view_page = new LazyPage(m_tabpanel, TAB_ID_MONITOR_WEB, 50, [this](wxWindow* parent) { + auto* view = new PrinterWebView(parent); + if (!m_printer_url.empty()) + view->load_url(m_printer_url, m_printer_api_key); + return view; + }); + m_lazy_pages.push_back(m_printer_view_page); Bind(EVT_LOAD_PRINTER_URL, [this](LoadPrinterViewEvent &evt) { - wxString url = evt.GetString(); - wxString key = evt.GetAPIkey(); //select_tab(MainFrame::tpMonitor); - m_printer_view->load_url(url, key); + m_printer_url = evt.GetString(); + m_printer_api_key = evt.GetAPIkey(); + if (PrinterWebView* view = PrinterWebView::if_built()) + view->load_url(m_printer_url, m_printer_api_key); }); - m_printer_view->Hide(); + m_multi_machine_page = new LazyPage(m_tabpanel, TAB_ID_MULTI_DEVICE, 40); + m_lazy_pages.push_back(m_multi_machine_page); if (wxGetApp().is_enable_multi_machine()) { - m_multi_machine = new MultiMachinePage(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_multi_machine->SetBackgroundColour(*wxWHITE); // TODO: change the bitmap - m_tabpanel->AddPage(TAB_ID_MULTI_DEVICE, m_multi_machine, _L("Multi-device"), "tab_multi_active"); + m_tabpanel->AddPage(TAB_ID_MULTI_DEVICE, m_multi_machine_page, _L("Multi-device"), "tab_multi_active"); } - m_project = new ProjectPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_project->SetBackgroundColour(*wxWHITE); - m_tabpanel->AddPage(TAB_ID_PROJECT, m_project, _L("Project"), "tab_auxiliary_active"); + m_project_page = new LazyPage(m_tabpanel, TAB_ID_PROJECT, 60); + m_lazy_pages.push_back(m_project_page); + m_tabpanel->AddPage(TAB_ID_PROJECT, m_project_page, _L("Project"), "tab_auxiliary_active"); - m_calibration = new CalibrationPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_calibration->SetBackgroundColour(*wxWHITE); - m_tabpanel->AddPage(TAB_ID_CALIBRATION, m_calibration, _L("Calibration"), "tab_calibration_active"); + // show_device() removes this tab for printers without the Bambu device tab, and the page + // then never builds its panel. + m_calibration_page = new LazyPage(m_tabpanel, TAB_ID_CALIBRATION, 30); + m_lazy_pages.push_back(m_calibration_page); + m_tabpanel->AddPage(TAB_ID_CALIBRATION, m_calibration_page, _L("Calibration"), "tab_calibration_active"); // Plugin pages are appended after the built-in tabs; their ids are namespaced // (plugin..) so they can't collide with the built-in TAB_ID_* constants. @@ -1493,67 +1492,44 @@ void MainFrame::show_device(bool should_use_native) { // Remove the extra page before switching to any layout that shouldn't have it. if (!want_web_device_tab) { if ((idx = m_tabpanel->FindPageByName(TAB_ID_MONITOR_WEB)) != wxNOT_FOUND) { - m_printer_view->Show(false); + m_printer_view_page->Show(false); m_tabpanel->RemovePage(idx); } } if (use_printer_agents) { - if (!m_monitor) { - m_monitor = new MonitorPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_monitor->SetBackgroundColour(*wxWHITE); - } - - if (m_tabpanel->FindPage(m_monitor) == wxNOT_FOUND) { - if ((idx = m_tabpanel->FindPage(m_printer_view)) != wxNOT_FOUND) { - m_printer_view->Show(false); + if (!m_monitor_page->in_book()) { + if ((idx = m_tabpanel->FindPage(m_printer_view_page)) != wxNOT_FOUND) { + m_printer_view_page->Show(false); m_tabpanel->RemovePage(idx); } - m_monitor->Show(false); - m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PREVIEW}), TAB_ID_MONITOR, m_monitor, + m_monitor_page->Show(false); + m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PREVIEW}), TAB_ID_MONITOR, m_monitor_page, _L("Device"), "tab_monitor_active"); } - if (m_printer_view == nullptr) { - m_printer_view = new PrinterWebView(m_tabpanel); - Bind(EVT_LOAD_PRINTER_URL, [this](LoadPrinterViewEvent& evt) { - wxString url = evt.GetString(); - wxString key = evt.GetAPIkey(); - // select_tab(MainFrame::tpMonitor); - m_printer_view->load_url(url, key); - }); - } - if (wxGetApp().is_enable_multi_machine()) { - if (!m_multi_machine) { - m_multi_machine = new MultiMachinePage(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_multi_machine->SetBackgroundColour(*wxWHITE); - } // TODO: change the bitmap - if (m_tabpanel->FindPage(m_multi_machine) == wxNOT_FOUND) { - m_multi_machine->Show(false); + if (!m_multi_machine_page->in_book()) { + m_multi_machine_page->Show(false); // Past the web Device tab when it is already there, so enabling multi-machine // later can't wedge this page between the two Device tabs. m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_MONITOR_WEB, TAB_ID_MONITOR}), - TAB_ID_MULTI_DEVICE, m_multi_machine, _L("Multi-device"), "tab_multi_active"); + TAB_ID_MULTI_DEVICE, m_multi_machine_page, _L("Multi-device"), "tab_multi_active"); } } - if (!m_calibration) { - m_calibration = new CalibrationPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_calibration->SetBackgroundColour(*wxWHITE); - } - if (m_tabpanel->FindPage(m_calibration) == wxNOT_FOUND) { - m_calibration->Show(false); - m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PROJECT}), TAB_ID_CALIBRATION, m_calibration, + if (!m_calibration_page->in_book()) { + m_calibration_page->Show(false); + m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PROJECT}), TAB_ID_CALIBRATION, m_calibration_page, _L("Calibration"), "tab_calibration_active"); } if (want_web_device_tab) { - if ((idx = m_tabpanel->FindPage(m_printer_view)) == wxNOT_FOUND) { - m_printer_view->Show(false); + if ((idx = m_tabpanel->FindPage(m_printer_view_page)) == wxNOT_FOUND) { + m_printer_view_page->Show(false); // Immediately right of the native Device tab, not at the end of the tab bar. m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_MONITOR}), TAB_ID_MONITOR_WEB, - m_printer_view, _L("Device (Web)"), "tab_monitor_active"); + m_printer_view_page, _L("Device (Web)"), "tab_monitor_active"); } else { m_tabpanel->SetPageText(idx, _L("Device (Web)")); } @@ -1565,48 +1541,37 @@ void MainFrame::show_device(bool should_use_native) { fit_tab_labels(); // ORCA on printer change m_plugin_pages.relayout(); // re-sync plugin tabs against the native tabs just mutated above - + if (m_prebuild_started) + m_idle.start(); return; } if (should_use_native) { - if (m_tabpanel->FindPage(m_monitor) != wxNOT_FOUND) { + if (m_monitor_page->in_book()) { fit_tab_labels(); // ORCA on printer change - same button layout return; } // Remove printer view - if ((idx = m_tabpanel->FindPage(m_printer_view)) != wxNOT_FOUND) { - m_printer_view->Show(false); + if ((idx = m_tabpanel->FindPage(m_printer_view_page)) != wxNOT_FOUND) { + m_printer_view_page->Show(false); m_tabpanel->RemovePage(idx); } - // Create/insert monitor page - if (!m_monitor) { - m_monitor = new MonitorPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_monitor->SetBackgroundColour(*wxWHITE); - } - m_monitor->Show(false); - m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PREVIEW}), TAB_ID_MONITOR, m_monitor, + // Insert monitor page + m_monitor_page->Show(false); + m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PREVIEW}), TAB_ID_MONITOR, m_monitor_page, _L("Device"), "tab_monitor_active"); if (wxGetApp().is_enable_multi_machine()) { - if (!m_multi_machine) { - m_multi_machine = new MultiMachinePage(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_multi_machine->SetBackgroundColour(*wxWHITE); - } // TODO: change the bitmap - m_multi_machine->Show(false); - m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_MONITOR}), TAB_ID_MULTI_DEVICE, m_multi_machine, + m_multi_machine_page->Show(false); + m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_MONITOR}), TAB_ID_MULTI_DEVICE, m_multi_machine_page, _L("Multi-device"), "tab_multi_active"); } - if (!m_calibration) { - m_calibration = new CalibrationPanel(m_tabpanel, wxID_ANY, wxDefaultPosition, wxDefaultSize); - m_calibration->SetBackgroundColour(*wxWHITE); - } - m_calibration->Show(false); + m_calibration_page->Show(false); // Last of the built-in tabs, but plugin tabs already sit past it — anchor rather than // append, so its position doesn't depend on the relayout() below running afterwards. - m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PROJECT}), TAB_ID_CALIBRATION, m_calibration, + m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PROJECT}), TAB_ID_CALIBRATION, m_calibration_page, _L("Calibration"), "tab_calibration_active"); #ifdef _MSW_DARK_MODE @@ -1614,37 +1579,30 @@ void MainFrame::show_device(bool should_use_native) { #endif // _MSW_DARK_MODE } else { - if (m_tabpanel->FindPage(m_printer_view) != wxNOT_FOUND) { + if (m_printer_view_page->in_book()) { fit_tab_labels(); // ORCA on printer change - same button layout return; } - if ((idx = m_tabpanel->FindPage(m_calibration)) != wxNOT_FOUND) { - m_calibration->Show(false); + if ((idx = m_tabpanel->FindPage(m_calibration_page)) != wxNOT_FOUND) { + m_calibration_page->Show(false); m_tabpanel->RemovePage(idx); } - if ((idx = m_tabpanel->FindPage(m_multi_machine)) != wxNOT_FOUND) { - m_multi_machine->Show(false); + if ((idx = m_tabpanel->FindPage(m_multi_machine_page)) != wxNOT_FOUND) { + m_multi_machine_page->Show(false); m_tabpanel->RemovePage(idx); } - if ((idx = m_tabpanel->FindPage(m_monitor)) != wxNOT_FOUND) { - m_monitor->Show(false); + if ((idx = m_tabpanel->FindPage(m_monitor_page)) != wxNOT_FOUND) { + m_monitor_page->Show(false); m_tabpanel->RemovePage(idx); } - if (m_printer_view == nullptr) { - m_printer_view = new PrinterWebView(m_tabpanel); - Bind(EVT_LOAD_PRINTER_URL, [this](LoadPrinterViewEvent& evt) { - wxString url = evt.GetString(); - wxString key = evt.GetAPIkey(); - // select_tab(MainFrame::tpMonitor); - m_printer_view->load_url(url, key); - }); - } - m_printer_view->Show(false); - m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PREVIEW}), TAB_ID_MONITOR, m_printer_view, + m_printer_view_page->Show(false); + m_tabpanel->InsertPage(m_tabpanel->PositionAfter({TAB_ID_PREVIEW}), TAB_ID_MONITOR, m_printer_view_page, _L("Device"), "tab_monitor_active"); } fit_tab_labels(); // ORCA on printer change m_plugin_pages.relayout(); // re-sync plugin tabs against the native tabs just mutated above + if (m_prebuild_started) + m_idle.start(); } bool MainFrame::is_prepare_or_preview_tab() const @@ -2690,13 +2648,11 @@ void MainFrame::on_dpi_changed(const wxRect& suggested_rect) //BBS GUI refactor: remove unused layout new/dlg //if (m_layout != ESettingsLayout::Dlg) // Do not update tabs if the Settings are in the separated dialog m_param_panel->msw_rescale(); - m_project->msw_rescale(); - if(m_monitor) - m_monitor->msw_rescale(); - if(m_multi_machine) - m_multi_machine->msw_rescale(); - if(m_calibration) - m_calibration->msw_rescale(); + // A panel mid-build gets the pass once it is complete. + ProjectPanel::when_built([](ProjectPanel& project) { project.msw_rescale(); }); + MonitorPanel::when_built([](MonitorPanel& monitor) { monitor.msw_rescale(); }); + MultiMachinePage::when_built([](MultiMachinePage& multi_machine) { multi_machine.msw_rescale(); }); + CalibrationPanel::when_built([](CalibrationPanel& calibration) { calibration.msw_rescale(); }); // BBS #if 0 @@ -2750,7 +2706,8 @@ void MainFrame::on_sys_color_changed() #endif #endif - diff_dialog.on_sys_color_changed(); + if (DiffPresetDialog* dialog = DiffPresetDialog::if_built()) + dialog->on_sys_color_changed(); // BBS m_tabpanel->Rescale(); @@ -2758,10 +2715,8 @@ void MainFrame::on_sys_color_changed() // update Plater wxGetApp().plater()->sys_color_changed(); - if(m_monitor) - m_monitor->on_sys_color_changed(); - if(m_calibration) - m_calibration->on_sys_color_changed(); + MonitorPanel::when_built([](MonitorPanel& monitor) { monitor.on_sys_color_changed(); }); + CalibrationPanel::when_built([](CalibrationPanel& calibration) { calibration.on_sys_color_changed(); }); // update Tabs for (auto tab : wxGetApp().tabs_list) tab->sys_color_changed(); @@ -3449,7 +3404,7 @@ void MainFrame::init_menubar_as_editor() top_menu->AppendSeparator(); append_shortcut_item( - top_menu, Shortcut::SpeedDial, false, _L("Open speed dial"), "", + top_menu, Shortcut::SpeedDial, false, _L("Open Speed Dial"), "", [](wxCommandEvent &) { wxGetApp().open_speed_dial(); }, "", nullptr, []() { return true; }, this); top_menu->AppendSeparator(); @@ -3556,7 +3511,7 @@ void MainFrame::init_menubar_as_editor() // On Mac, the Apple menu ignores non-standard custom items, so add Preset Bundle to the File menu fileMenu->AppendSeparator(); append_shortcut_item( - fileMenu, Shortcut::SpeedDial, false, _L("Open speed dial"), "", + fileMenu, Shortcut::SpeedDial, false, _L("Open Speed Dial"), "", [](wxCommandEvent&) { wxGetApp().open_speed_dial(); }, "", nullptr, []() { return true; }, this); append_menu_item( @@ -3694,7 +3649,8 @@ void MainFrame::set_max_recent_count(int max) } wxGetApp().app_config->set_recent_projects(recent_projects); wxGetApp().app_config->save(); - m_webview->SendRecentList(-1); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SendRecentList(-1); } } @@ -4038,23 +3994,124 @@ void MainFrame::select_tab(wxPanel* panel) select_tab(page_name); } +// Selects the Prepare page without the page-changed event, so the GL canvas is on screen +// and nothing else is built for the pass. +void MainFrame::select_prepare_for_gl_init() +{ + m_tabpanel->ChangeSelection(m_tabpanel->FindPageByName(TAB_ID_PREPARE)); +} + +// The book shows its first page as it is inserted, while the frame is hidden and nothing +// may build; the first show completes that page. +bool MainFrame::Show(bool show) +{ + const bool changed = DPIFrame::Show(show); + if (show && changed && m_tabpanel != nullptr) + if (wxWindow* page = m_tabpanel->GetCurrentPage()) + page->Show(true); + return changed; +} + +bool MainFrame::GLResourcesPrebuild::built() const +{ + return m_frame.m_plater != nullptr && m_frame.m_plater->canvas3D()->is_initialized() && + m_frame.m_plater->get_partplate_list().icon_textures_loaded(); +} + +bool MainFrame::GLResourcesPrebuild::build_step() +{ + GLCanvas3D* canvas = m_frame.m_plater->canvas3D(); +#ifdef __WXGTK__ + // wx creates a GTK canvas's GL surface when the widget is realized, so the context can be + // made current on it while hidden. + gtk_widget_realize(canvas->get_wxglcanvas()->GetHandle()); +#endif + if (!canvas->make_current_for_postinit()) { + // The first render of the canvas loads everything instead. + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": cannot make the GL context current on the hidden canvas"; + m_failed = true; + return false; + } + switch (m_step) { + case 0: + m_failed = !wxGetApp().init_opengl(); + break; + case 1: { + const Size size = canvas->get_canvas_size(); + wxGetApp().imgui()->set_display_size(float(std::max(1, size.get_width())), float(std::max(1, size.get_height()))); + canvas->set_imgui_scaling(); + // Builds the font atlas without leaving a frame open at the hidden canvas's size. + wxGetApp().imgui()->new_frame(); + wxGetApp().imgui()->end_frame(); + break; + } + case 2: + // One texture per unit until none remain. + if (m_frame.m_plater->get_partplate_list().load_next_plate_texture()) + return true; + break; + case 3: + m_failed = !canvas->init(); + break; + default: + // Runs after init(), which sets the color mode the icons are drawn for. + m_frame.m_plater->get_partplate_list().load_icon_textures(); + return false; + } + ++m_step; + return !m_failed; +} + +bool MainFrame::PrepareLayoutPrebuild::built() const +{ + // The book lays out the page it shows. + const wxWindow* page = m_frame.m_tabpanel != nullptr ? m_frame.m_tabpanel->GetCurrentPage() : nullptr; + return page == nullptr || page == m_frame.m_plater || page->GetSize() == m_laid_out_size; +} + +bool MainFrame::PrepareLayoutPrebuild::build_step() +{ + // Sized as the book sizes the page it selects, so the selection finds nothing to lay out. + const wxWindow* page = m_frame.m_tabpanel->GetCurrentPage(); + m_laid_out_size = page->GetSize(); + m_frame.m_plater->SetSize(page->GetRect()); + return false; +} + +// A page out of the book stays registered and is passed over; a negative order is never +// registered. +void MainFrame::prebuild_pages_when_idle() +{ + m_idle.clear(); + m_idle.add(m_gl_prebuild); + if (m_param_panel) + m_idle.add(m_param_panel->settings_page_prebuild()); + m_idle.add(m_prepare_layout_prebuild); + for (LazyBase* page : m_lazy_pages) + if (page->prebuild_order() >= 0) + m_idle.add(*page); + m_idle.add(m_diff_dialog); + BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << ": prebuild queue: " << m_idle.names(); + m_idle.start(); + m_prebuild_started = true; +} + //BBS void MainFrame::jump_to_monitor(std::string dev_id) { - if(!m_monitor) - return; m_tabpanel->SelectPageByName(TAB_ID_MONITOR); if (!dev_id.empty()) { - ((MonitorPanel*)m_monitor)->select_machine(dev_id); + MonitorPanel::ensure()->select_machine(dev_id); } } void MainFrame::jump_to_multipage() { - if(!m_multi_machine) + if (!m_multi_machine_page->in_book()) return; m_tabpanel->SelectPageByName(TAB_ID_MULTI_DEVICE); - ((MultiMachinePage*)m_multi_machine)->jump_to_send_page(); + if (MultiMachinePage* page = m_multi_machine_page->ensure()) + page->jump_to_send_page(); } @@ -4103,8 +4160,8 @@ void MainFrame::request_select_tab(const wxString& id) } int MainFrame::get_calibration_curr_tab() { - if (m_calibration) - return m_calibration->get_tabpanel()->GetSelection(); + if (CalibrationPanel* calibration = CalibrationPanel::if_built()) + return calibration->get_tabpanel()->GetSelection(); return -1; } @@ -4213,7 +4270,8 @@ void MainFrame::add_to_recent_projects(const wxString& filename) recent_projects.push_back(into_u8(m_recent_projects.GetHistoryFile(i))); } wxGetApp().app_config->set_recent_projects(recent_projects); - m_webview->SendRecentList(0); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SendRecentList(0); } } @@ -4329,7 +4387,8 @@ void MainFrame::open_recent_project(size_t file_id, wxString const & filename) recent_projects.push_back(into_u8(m_recent_projects.GetHistoryFile(i))); } wxGetApp().app_config->set_recent_projects(recent_projects); - m_webview->SendRecentList(-1); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SendRecentList(-1); } } } @@ -4352,7 +4411,8 @@ void MainFrame::remove_recent_project(size_t file_id, wxString const &filename) recent_projects.push_back(into_u8(m_recent_projects.GetHistoryFile(i))); } wxGetApp().app_config->set_recent_projects(recent_projects); - m_webview->SendRecentList(-1); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SendRecentList(-1); } void MainFrame::load_url(wxString url) @@ -4406,14 +4466,14 @@ bool MainFrame::is_printer_view() const { return m_tabpanel->GetSelectedPageName void MainFrame::refresh_plugin_tips() { - if (m_webview != nullptr) - m_webview->ShowNetpluginTip(); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->ShowNetpluginTip(); } void MainFrame::RunScript(wxString js) { - if (m_webview != nullptr) - m_webview->RunScript(js); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->RunScript(js); } void MainFrame::technology_changed() @@ -4522,7 +4582,8 @@ void MainFrame::update_side_preset_ui() //take off multi machine - if(m_multi_machine){m_multi_machine->clear_page();} + if (MultiMachinePage* multi_machine = MultiMachinePage::if_built()) + multi_machine->clear_page(); } void MainFrame::on_select_default_preset(SimpleEvent& evt) diff --git a/src/slic3r/GUI/MainFrame.hpp b/src/slic3r/GUI/MainFrame.hpp index 66f3b31263..dce12c3fc1 100644 --- a/src/slic3r/GUI/MainFrame.hpp +++ b/src/slic3r/GUI/MainFrame.hpp @@ -26,6 +26,8 @@ #include "Widgets/SideButton.hpp" #include "Widgets/SideMenuPopup.hpp" #include "FilamentGroupPopup.hpp" +#include "LazyPage.hpp" +#include "IdleScheduler.hpp" #include @@ -136,6 +138,45 @@ class MainFrame : public DPIFrame #endif bool m_loaded {false}; wxTimer* m_reset_title_text_colour_timer{ nullptr }; + IdleScheduler m_idle; + bool m_prebuild_started{ false }; + // Loads the Prepare canvas's GL resources while its page is hidden. + class GLResourcesPrebuild : public LazyBase + { + public: + explicit GLResourcesPrebuild(MainFrame& frame) : m_frame(frame) {} + const std::string& name() const override { return m_name; } + bool built() const override; + bool pending() const override { return !m_failed && !built(); } + bool build_step() override; + int prebuild_order() const override { return 0; } + + private: + MainFrame& m_frame; + std::string m_name{ "gl_resources" }; + int m_step{ 0 }; + bool m_failed{ false }; + } m_gl_prebuild{ *this }; + // Lays out the hidden Prepare page at the size the book gives its pages. + class PrepareLayoutPrebuild : public LazyBase + { + public: + explicit PrepareLayoutPrebuild(MainFrame& frame) : m_frame(frame) {} + const std::string& name() const override { return m_name; } + bool built() const override; + bool build_step() override; + int prebuild_order() const override { return 0; } + + private: + MainFrame& m_frame; + std::string m_name{ "prepare_layout" }; + wxSize m_laid_out_size; + } m_prepare_layout_prebuild{ *this }; + // Every LazyPage, in and out of the book; prebuild_pages_when_idle() registers them. + std::vector m_lazy_pages; + // The latest EVT_LOAD_PRINTER_URL, applied when the web Device view is built. + wxString m_printer_url; + wxString m_printer_api_key; wxString m_qs_last_input_file = wxEmptyString; wxString m_qs_last_output_file = wxEmptyString; @@ -180,7 +221,7 @@ class MainFrame : public DPIFrame bool can_delete() const; bool can_delete_all() const; bool can_reslice() const; - void bind_diff_dialog(); + DiffPresetDialog* make_diff_dialog(); // BBS wxBoxSizer* create_side_tools(); @@ -377,6 +418,12 @@ public: void select_tab(wxPanel* panel); void select_tab(const wxString& id = wxString()); void request_select_tab(const wxString& id); + // post_init() needs the plater's canvas on screen to initialize OpenGL; this pass does not + // build the settings page. + void select_prepare_for_gl_init(); + // Builds the lazy tab pages while the user is idle; post_init() calls it once. + void prebuild_pages_when_idle(); + bool Show(bool show = true) override; int get_calibration_curr_tab(); void select_view(const std::string& direction); void update_shortcut_labels(); @@ -435,27 +482,21 @@ public: BBLTopbar* m_topbar{ nullptr }; PrintHostQueueDialog* printhost_queue_dlg() { return m_printhost_queue_dlg; } Plater* m_plater { nullptr }; + // Lazy pages, created once and kept for the frame's life; their panels are reached + // through LazyInstance's statics, and show_device() only moves pages in and out of the book. #ifdef SLIC3R_CAD - // The tab page is the placeholder; m_design_panel stays null until the tab is first - // selected, so everything the Design panel builds stays off the startup path. - wxPanel* m_design_page { nullptr }; - DesignPanel* m_design_panel { nullptr }; - // Builds the Design panel if it does not exist yet and returns it (null only before the - // placeholder page itself exists). Main thread only -- it creates wx controls. Both the - // tab activation and the MCP socket go through this: the socket is driven headlessly, - // with nobody to click the tab, and without this every verb would answer "not ready". - DesignPanel* ensure_design_panel(); + LazyPage* m_design_page { nullptr }; #endif //BBS: GUI refactor - MonitorPanel* m_monitor{ nullptr }; + LazyPage* m_monitor_page{ nullptr }; //AuxiliaryPanel* m_auxiliary{ nullptr }; - MultiMachinePage* m_multi_machine{ nullptr }; - ProjectPanel* m_project{ nullptr }; + LazyPage* m_multi_machine_page{ nullptr }; + LazyPage* m_project_page{ nullptr }; - CalibrationPanel* m_calibration{ nullptr }; - WebViewPanel* m_webview { nullptr }; - PrinterWebView* m_printer_view{nullptr}; + LazyPage* m_calibration_page{ nullptr }; + LazyPage* m_home_page { nullptr }; + LazyPage* m_printer_view_page{nullptr}; PluginPages m_plugin_pages; wxLogWindow* m_log_window { nullptr }; // BBS @@ -466,7 +507,8 @@ public: ParamsDialog* m_param_dialog{ nullptr }; //BBS SettingsDialog m_settings_dialog; - DiffPresetDialog diff_dialog; + // The Compare presets dialog, built on first use or at idle through its holder. + Lazy m_diff_dialog; wxWindow* m_plater_page{ nullptr }; PrintHostQueueDialog* m_printhost_queue_dlg; diff --git a/src/slic3r/GUI/MixedFilamentDialog.cpp b/src/slic3r/GUI/MixedFilamentDialog.cpp index 8176a76202..246c6548c6 100644 --- a/src/slic3r/GUI/MixedFilamentDialog.cpp +++ b/src/slic3r/GUI/MixedFilamentDialog.cpp @@ -1125,7 +1125,7 @@ wxBoxSizer* MixedFilamentDialog::create_recommendation_grid() outer->Add(title_sizer, 0, wxEXPAND | wxBOTTOM, FromDIP(4)); m_recommendation_scroll = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(-1, FromDIP(116))); - m_recommendation_scroll->SetScrollRate(0, 5); + m_recommendation_scroll->SetScrollRate(0, FromDIP(20)); m_recommendation_scroll->SetBackgroundColour(StateColor::darkModeColorFor(wxColour("#F8F8F8"))); m_recommendation_grid = new wxWrapSizer(wxHORIZONTAL, wxREMOVE_LEADING_SPACES); diff --git a/src/slic3r/GUI/Monitor.cpp b/src/slic3r/GUI/Monitor.cpp index 1a6d969988..7352ee3dd7 100644 --- a/src/slic3r/GUI/Monitor.cpp +++ b/src/slic3r/GUI/Monitor.cpp @@ -103,6 +103,7 @@ MonitorPanel::MonitorPanel(wxWindow* parent, wxWindowID id, const wxPoint& pos, : wxPanel(parent, id, pos, size, style), m_select_machine(SelectMachinePopup(this)) { + SetBackgroundColour(*wxWHITE); #ifdef __WINDOWS__ SetDoubleBuffered(true); #endif //__WINDOWS__ @@ -180,31 +181,36 @@ void MonitorPanel::init_tabpanel() auto title = m_tabpanel->GetPageText(m_tabpanel->GetSelection()); m_media_file_panel->SwitchStorage(title == _L("Storage")); } - page->SetFocus(); + // The first page is selected while the panel is built off screen. + if (page->IsShownOnScreen()) + page->SetFocus(); update_all(); }, m_tabpanel->GetId()); - //m_status_add_machine_panel = new AddMachinePanel(m_tabpanel); - m_status_info_panel = new StatusPanel(m_tabpanel); + m_status_info_panel = new StatusPanel(m_tabpanel); + // Queued before the page is added, since adding it selects it and runs the handler above, + // where built() must already be false. + add_build_steps_of(*m_status_info_panel); m_tabpanel->AddPage(m_status_info_panel, _L("Status"), true); + add_build_step([this] { + m_media_file_panel = new MediaFilePanel(m_tabpanel); + m_tabpanel->AddPage(m_media_file_panel, _L("Storage"), false); + }); + add_build_step([this] { + m_upgrade_panel = new UpgradePanel(m_tabpanel); + m_tabpanel->AddPage(m_upgrade_panel, _L_CONTEXT(L_CONTEXT("Update", "Firmware"), "Firmware"), false); + }); + add_build_step([this] { + m_hms_panel = new HMSPanel(m_tabpanel); + m_tabpanel->AddPage(m_hms_panel, _L("Assistant(HMS)"), false); - m_media_file_panel = new MediaFilePanel(m_tabpanel); - m_tabpanel->AddPage(m_media_file_panel, _L("Storage"), false); - //m_tabpanel->AddPage(m_media_file_panel, _L("Internal Storage"), false); + std::string network_ver = Slic3r::NetworkAgent::get_version(); + if (!network_ver.empty()) { + m_tabpanel->SetFooterText(wxString::Format(_L("Network plug-in v%s"), network_ver)); + } - m_upgrade_panel = new UpgradePanel(m_tabpanel); - m_tabpanel->AddPage(m_upgrade_panel, _L_CONTEXT(L_CONTEXT("Update", "Firmware"), "Firmware"), false); - - m_hms_panel = new HMSPanel(m_tabpanel); - m_tabpanel->AddPage(m_hms_panel, _L("Assistant(HMS)"), false); - - std::string network_ver = Slic3r::NetworkAgent::get_version(); - if (!network_ver.empty()) { - m_tabpanel->SetFooterText(wxString::Format(_L("Network plug-in v%s"), network_ver)); - } - - m_initialized = true; - show_status((int)MonitorStatus::MONITOR_NO_PRINTER); + show_status((int)MonitorStatus::MONITOR_NO_PRINTER); + }); } void MonitorPanel::set_default() @@ -288,19 +294,23 @@ void MonitorPanel::on_select_printer(wxCommandEvent& event) set_default(); update_all(); - MachineObject *obj_ = dev->get_selected_machine(); - if (obj_) { - obj_->last_cali_version = -1; - obj_->reset_pa_cali_history_result(); - obj_->reset_pa_cali_result(); - Sidebar &sidebar = GUI::wxGetApp().sidebar(); - sidebar.update_sync_status(obj_); - sidebar.set_need_auto_sync_after_connect_printer(sidebar.need_auto_sync_extruder_list_after_connect_priner(obj_)); - } + on_machine_selected(dev->get_selected_machine()); Layout(); } +void MonitorPanel::on_machine_selected(MachineObject* obj) +{ + if (obj == nullptr) + return; + obj->last_cali_version = -1; + obj->reset_pa_cali_history_result(); + obj->reset_pa_cali_result(); + Sidebar& sidebar = GUI::wxGetApp().sidebar(); + sidebar.update_sync_status(obj); + sidebar.set_need_auto_sync_after_connect_printer(sidebar.need_auto_sync_extruder_list_after_connect_priner(obj)); +} + void MonitorPanel::on_printer_clicked(wxMouseEvent &event) { auto mouse_pos = ClientToScreen(event.GetPosition()); @@ -331,7 +341,8 @@ void MonitorPanel::on_size(wxSizeEvent &event) void MonitorPanel::update_all() { - if (!m_initialized) + // Every page exists once the last build step has run. + if (!built()) return; NetworkAgent* m_agent = wxGetApp().getAgent(); @@ -412,16 +423,12 @@ void MonitorPanel::update_hms_tag() bool MonitorPanel::Show(bool show) { -#ifdef __APPLE__ - // Notebook::InsertPage() hides every page it appends, so this also runs while MainFrame is - // still constructing, before GUI_App::mainframe is assigned. Same guard as Plater::Show(). - if (wxGetApp().mainframe) - wxGetApp().mainframe->SetMinSize(wxGetApp().plater()->GetMinSize()); -#endif - NetworkAgent* m_agent = wxGetApp().getAgent(); DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager(); if (show) { +#ifdef __APPLE__ + wxGetApp().mainframe->SetMinSize(wxGetApp().plater()->GetMinSize()); +#endif start_update(); update_network_version_footer(); @@ -448,7 +455,7 @@ bool MonitorPanel::Show(bool show) void MonitorPanel::show_status(int status) { - if (!m_initialized) return; + if (!built()) return; if (last_status == status)return; if ((last_status & (int)MonitorStatus::MONITOR_CONNECTING) != 0) { NetworkAgent* agent = wxGetApp().getAgent(); diff --git a/src/slic3r/GUI/Monitor.hpp b/src/slic3r/GUI/Monitor.hpp index 9252b04559..94474f73b0 100644 --- a/src/slic3r/GUI/Monitor.hpp +++ b/src/slic3r/GUI/Monitor.hpp @@ -49,6 +49,7 @@ #include "slic3r/GUI/AmsWidgets.hpp" #include "Widgets/SideTools.hpp" #include "SelectMachinePop.hpp" +#include "Lazy.hpp" namespace Slic3r { namespace GUI { @@ -72,16 +73,16 @@ public: void msw_rescale(); }; -class MonitorPanel : public wxPanel +class MonitorPanel : public wxPanel, public StagedBuild, public LazyInstance { private: Tabbook* m_tabpanel{ nullptr }; wxSizer* m_main_sizer{ nullptr }; - StatusPanel* m_status_info_panel; - MediaFilePanel* m_media_file_panel; - UpgradePanel* m_upgrade_panel; - HMSPanel* m_hms_panel; + StatusPanel* m_status_info_panel{ nullptr }; + MediaFilePanel* m_media_file_panel{ nullptr }; + UpgradePanel* m_upgrade_panel{ nullptr }; + HMSPanel* m_hms_panel{ nullptr }; /* side tools */ SideTools* m_side_tools{nullptr}; @@ -96,7 +97,6 @@ private: wxBitmap m_arrow_img; int last_status; - bool m_initialized { false }; bool update_flag{false}; wxTimer* m_refresh_timer = nullptr; @@ -125,6 +125,8 @@ public: StatusPanel* get_status_panel() {return m_status_info_panel;}; void select_machine(std::string machine_sn); + // Resets the selected printer's calibration results and syncs the sidebar, without the Device tab. + static void on_machine_selected(MachineObject* obj); void on_timer(wxTimerEvent& event); void on_select_printer(wxCommandEvent& event); void on_printer_clicked(wxMouseEvent &event); diff --git a/src/slic3r/GUI/MsgDialog.cpp b/src/slic3r/GUI/MsgDialog.cpp index 7f1effd162..8c981a970f 100644 --- a/src/slic3r/GUI/MsgDialog.cpp +++ b/src/slic3r/GUI/MsgDialog.cpp @@ -194,9 +194,10 @@ Button* MsgDialog::add_button(wxWindowID btn_id, bool set_focus /*= false*/, con bd->button = btn; //bd->type = type; - mb->id = wxString::Format("%d", m_buttons.size()); + // m_buttons.size() is a size_t, which does not match the %d conversion + mb->id = wxString(std::to_string(m_buttons.size())); mb->buttondata = bd; - m_buttons[ wxString::Format("%d", m_buttons.size())] = mb; + m_buttons[ wxString(std::to_string(m_buttons.size()))] = mb; return btn; }; @@ -398,7 +399,7 @@ static void add_msg_content(wxWindow *parent, } wxScrolledWindow *scrolledWindow = new wxScrolledWindow(parent, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); scrolledWindow->SetBackgroundColour(*wxWHITE); - scrolledWindow->SetScrollRate(0, 20); + scrolledWindow->SetScrollRate(0, scrolledWindow->FromDIP(20)); scrolledWindow->EnableScrolling(false, true); wxBoxSizer *sizer_scrolled = new wxBoxSizer(wxHORIZONTAL); Label *wrapped_text = new Label(scrolledWindow, font, msg, LB_AUTO_WRAP, wxSize(info_width, -1)); diff --git a/src/slic3r/GUI/MultiMachineManagerPage.cpp b/src/slic3r/GUI/MultiMachineManagerPage.cpp index 792c23fb13..f68188a9f1 100644 --- a/src/slic3r/GUI/MultiMachineManagerPage.cpp +++ b/src/slic3r/GUI/MultiMachineManagerPage.cpp @@ -21,8 +21,9 @@ MultiMachineItem::MultiMachineItem(wxWindow* parent, MachineObject* obj) Bind(wxEVT_MOTION, &MultiMachineItem::OnMove, this); Bind(EVT_MULTI_DEVICE_VIEW, [obj](auto& e) { wxGetApp().mainframe->jump_to_monitor(obj->get_dev_id()); - if (wxGetApp().mainframe->m_monitor->get_status_panel()->get_media_play_ctrl()) { - wxGetApp().mainframe->m_monitor->get_status_panel()->get_media_play_ctrl()->jump_to_play(); + MonitorPanel* monitor = MonitorPanel::if_built(); + if (monitor && monitor->get_status_panel()->get_media_play_ctrl()) { + monitor->get_status_panel()->get_media_play_ctrl()->jump_to_play(); } }); wxGetApp().UpdateDarkUIWin(this); @@ -397,7 +398,7 @@ MultiMachineManagerPage::MultiMachineManagerPage(wxWindow* parent) m_machine_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize); m_machine_list->SetBackgroundColour(*wxWHITE); - m_machine_list->SetScrollRate(0, 5); + m_machine_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT)); m_machine_list->SetMinSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT))); m_machine_list->SetMaxSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT))); diff --git a/src/slic3r/GUI/MultiMachinePage.cpp b/src/slic3r/GUI/MultiMachinePage.cpp index dd67e099a0..2b6fe75f34 100644 --- a/src/slic3r/GUI/MultiMachinePage.cpp +++ b/src/slic3r/GUI/MultiMachinePage.cpp @@ -11,6 +11,7 @@ namespace GUI { MultiMachinePage::MultiMachinePage(wxWindow* parent, wxWindowID id, const wxPoint& pos, const wxSize& size, long style) : wxPanel(parent, id, pos, size, style) { + SetBackgroundColour(*wxWHITE); init_tabpanel(); m_main_sizer = new wxBoxSizer(wxHORIZONTAL); m_main_sizer->Add(m_tabpanel, 1, wxEXPAND | wxLEFT, 0); @@ -322,7 +323,7 @@ MultiMachinePickPage::MultiMachinePickPage(Plater* plater /*= nullptr*/) scroll_macine_list->SetMinSize(wxSize(FromDIP(400), FromDIP(10 * 30))); scroll_macine_list->SetMaxSize(wxSize(FromDIP(400), FromDIP(10 * 30))); scroll_macine_list->SetBackgroundColour(*wxWHITE); - scroll_macine_list->SetScrollRate(0, 5); + scroll_macine_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT)); sizer_machine_list = new wxBoxSizer(wxVERTICAL); scroll_macine_list->SetSizer(sizer_machine_list); diff --git a/src/slic3r/GUI/MultiMachinePage.hpp b/src/slic3r/GUI/MultiMachinePage.hpp index 724eeed2a9..14d531e8ab 100644 --- a/src/slic3r/GUI/MultiMachinePage.hpp +++ b/src/slic3r/GUI/MultiMachinePage.hpp @@ -7,6 +7,7 @@ #include "MultiTaskManagerPage.hpp" #include "MultiMachineManagerPage.hpp" #include "Tabbook.hpp" +#include "Lazy.hpp" #include "wx/button.h" @@ -19,7 +20,7 @@ namespace GUI { #define PICK_LEFT_DEV_STATUS 250 #define PICK_DEVICE_MAX 6 -class MultiMachinePage : public wxPanel +class MultiMachinePage : public wxPanel, public LazyInstance { private: wxTimer* m_refresh_timer = nullptr; diff --git a/src/slic3r/GUI/MultiTaskManagerPage.cpp b/src/slic3r/GUI/MultiTaskManagerPage.cpp index 48a7fbe43e..d063b34743 100644 --- a/src/slic3r/GUI/MultiTaskManagerPage.cpp +++ b/src/slic3r/GUI/MultiTaskManagerPage.cpp @@ -675,7 +675,7 @@ LocalTaskManagerPage::LocalTaskManagerPage(wxWindow* parent) m_task_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize); m_task_list->SetBackgroundColour(*wxWHITE); - m_task_list->SetScrollRate(0, 5); + m_task_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT)); m_task_list->SetMinSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), FromDIP(DEVICE_ITEM_MAX_HEIGHT))); m_task_list->SetMaxSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT))); @@ -1056,7 +1056,7 @@ CloudTaskManagerPage::CloudTaskManagerPage(wxWindow* parent) m_task_list = new wxScrolledWindow(m_main_panel, wxID_ANY, wxDefaultPosition, wxDefaultSize); m_task_list->SetBackgroundColour(*wxWHITE); - m_task_list->SetScrollRate(0, 5); + m_task_list->SetScrollRate(0, FromDIP(DEVICE_ITEM_MAX_HEIGHT)); m_task_list->SetMinSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), FromDIP(DEVICE_ITEM_MAX_HEIGHT))); m_task_list->SetMaxSize(wxSize(FromDIP(CLOUD_TASK_ITEM_MAX_WIDTH), 10 * FromDIP(DEVICE_ITEM_MAX_HEIGHT))); diff --git a/src/slic3r/GUI/NotificationManager.cpp b/src/slic3r/GUI/NotificationManager.cpp index 2ee875901c..e6172135a6 100644 --- a/src/slic3r/GUI/NotificationManager.cpp +++ b/src/slic3r/GUI/NotificationManager.cpp @@ -11,6 +11,7 @@ #include "MainFrame.hpp" #include "Tab.hpp" #include "libslic3r/Config.hpp" +#include "libslic3r/PrintBase.hpp" #include "format.hpp" #include @@ -3084,7 +3085,9 @@ bool NotificationManager::push_notification_data(std::unique_ptractivate_existing(notification.get())) { if (m_initialized && m_imgui_ready) { - if (notification->get_type() == NotificationType::SlicingWarning) { + // Precise Seam already aggregates all causes; replace it on repeated warning events. + if (notification->get_type() == NotificationType::SlicingWarning && + notification->get_data().sub_msg_id != PrintStateBase::SlicingPreciseSeamWarning) { m_pop_notifications.back()->append(notification->get_data().ori_text); } else { m_pop_notifications.back()->update(notification->get_data()); diff --git a/src/slic3r/GUI/ObjColorDialog.cpp b/src/slic3r/GUI/ObjColorDialog.cpp index ef5d4ba9d2..4388449bb5 100644 --- a/src/slic3r/GUI/ObjColorDialog.cpp +++ b/src/slic3r/GUI/ObjColorDialog.cpp @@ -355,7 +355,7 @@ ObjColorPanel::ObjColorPanel(wxWindow *parent, Slic3r::ObjDialogInOut &in_out, c //new color table m_scrolledWindow = new wxScrolledWindow(m_page_simple, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); m_scrolledWindow->SetBackgroundColour(*wxWHITE); - m_scrolledWindow->SetScrollRate(0, 20); + m_scrolledWindow->SetScrollRate(0, FromDIP(20)); m_scrolledWindow->EnableScrolling(false, true); m_scrolledWindow->ShowScrollbars(wxScrollbarVisibility::wxSHOW_SB_NEVER, wxScrollbarVisibility::wxSHOW_SB_DEFAULT); draw_new_table(); diff --git a/src/slic3r/GUI/ObjectDataViewModel.cpp b/src/slic3r/GUI/ObjectDataViewModel.cpp index b0b7e891c4..a20dc50877 100644 --- a/src/slic3r/GUI/ObjectDataViewModel.cpp +++ b/src/slic3r/GUI/ObjectDataViewModel.cpp @@ -546,7 +546,8 @@ void ObjectDataViewModel::UpdateBitmapForNode(ObjectDataViewModelNode *node) { bool is_volume_node = node->GetType() & itVolume; int vol_type = static_cast(node->GetVolumeType()); - is_volume_node &= (vol_type >= int(ModelVolumeType::MODEL_PART) && vol_type <= int(ModelVolumeType::SUPPORT_ENFORCER)); + // Extended range to include Precise Seam modifier types + is_volume_node &= (vol_type >= int(ModelVolumeType::MODEL_PART) && vol_type <= int(ModelVolumeType::PRECISE_SEAM_NEUTRAL)); if (!node->has_warning_icon() && !node->has_lock()) { node->SetBitmap(is_volume_node ? ( diff --git a/src/slic3r/GUI/OpenGLManager.cpp b/src/slic3r/GUI/OpenGLManager.cpp index 382a9176b9..0fc8ce9c6e 100644 --- a/src/slic3r/GUI/OpenGLManager.cpp +++ b/src/slic3r/GUI/OpenGLManager.cpp @@ -286,7 +286,7 @@ bool OpenGLManager::init_gl(bool popup_error) bool valid_version = s_gl_info.is_version_greater_or_equal_to(2, 0); if (!valid_version) { - BOOST_LOG_TRIVIAL(error) << "Found opengl version <= 3.2"<< std::endl; + BOOST_LOG_TRIVIAL(error) << "Found opengl version < 2.0"<< std::endl; // Complain about the OpenGL version. if (popup_error) { wxString message = from_u8((boost::format( diff --git a/src/slic3r/GUI/OptionsGroup.hpp b/src/slic3r/GUI/OptionsGroup.hpp index 921ac62f15..8dde661bdd 100644 --- a/src/slic3r/GUI/OptionsGroup.hpp +++ b/src/slic3r/GUI/OptionsGroup.hpp @@ -112,7 +112,7 @@ public: bool split_multi_line{false}; bool option_label_at_right{false}; // BBS: new layout - wxWindow * stb; + wxWindow * stb{ nullptr }; const wxString icon; const wxString title; bool m_labels_hidden{false}; diff --git a/src/slic3r/GUI/ParamsPanel.cpp b/src/slic3r/GUI/ParamsPanel.cpp index 5a49df1280..9e16fcf8df 100644 --- a/src/slic3r/GUI/ParamsPanel.cpp +++ b/src/slic3r/GUI/ParamsPanel.cpp @@ -290,7 +290,7 @@ ParamsPanel::ParamsPanel( wxWindow* parent, wxWindowID id, const wxPoint& pos, c m_compare_btn = new ScalableButton(m_top_panel, wxID_ANY, "compare", wxEmptyString, wxDefaultSize, wxDefaultPosition, wxBU_EXACTFIT | wxNO_BORDER, true); m_compare_btn->SetToolTip(_L("Compare presets")); - m_compare_btn->Bind(wxEVT_BUTTON, ([](wxCommandEvent e) { wxGetApp().mainframe->diff_dialog.show(); })); + m_compare_btn->Bind(wxEVT_BUTTON, ([](wxCommandEvent e) { DiffPresetDialog::ensure()->show(); })); m_setting_btn = new ScalableButton(m_top_panel, wxID_ANY, "table", wxEmptyString, wxDefaultSize, wxDefaultPosition, wxBU_EXACTFIT | wxNO_BORDER, true); m_setting_btn->SetToolTip(_L("View all object's settings")); @@ -391,7 +391,7 @@ ParamsPanel::ParamsPanel( wxWindow* parent, wxWindowID id, const wxPoint& pos, c m_page_sizer = new wxBoxSizer(wxVERTICAL); m_page_view->SetSizer(m_page_sizer); - m_page_view->SetScrollbars(1, 20, 1, 2); + m_page_view->SetScrollbars(1, FromDIP(20), 1, 2); //m_page_view->SetScrollRate( 5, 5 ); if (m_mode_region) @@ -550,18 +550,36 @@ void ParamsPanel::clear_page() void ParamsPanel::OnActivate() { if (m_current_tab == NULL) - { - //the first time - BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": first time opened, set current tab to print"); - // BBS: open/close tab - //m_current_tab = m_tab_print; - set_active_tab(m_tab_print ? m_tab_print : m_tab_filament); - } + select_default_tab(); Tab* cur_tab = dynamic_cast (m_current_tab); if (cur_tab) cur_tab->OnActivate(); } +void ParamsPanel::select_default_tab() +{ + BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(": first time opened, set current tab to print"); + // BBS: open/close tab + //m_current_tab = m_tab_print; + set_active_tab(m_tab_print ? m_tab_print : m_tab_filament); +} + +bool ParamsPanel::SettingsPagePrebuild::built() const +{ + Tab* tab = dynamic_cast(m_panel.m_current_tab); + return tab != nullptr && !tab->page_build_pending(); +} + +bool ParamsPanel::SettingsPagePrebuild::build_step() +{ + if (m_panel.m_current_tab == nullptr) { + m_panel.select_default_tab(); + return !built(); + } + Tab* tab = dynamic_cast(m_panel.m_current_tab); + return tab != nullptr && tab->page_build_step(); +} + void ParamsPanel::OnToggled(wxCommandEvent& event) { if (m_mode_region && m_mode_region->GetId() == event.GetId()) { diff --git a/src/slic3r/GUI/ParamsPanel.hpp b/src/slic3r/GUI/ParamsPanel.hpp index 91bf3d2a7e..f4e151456d 100644 --- a/src/slic3r/GUI/ParamsPanel.hpp +++ b/src/slic3r/GUI/ParamsPanel.hpp @@ -30,6 +30,7 @@ #include "wxExtensions.hpp" #include "GUI_Utils.hpp" #include "Widgets/Button.hpp" +#include "Lazy.hpp" class ModeSwitchButton; class SwitchButton; @@ -121,6 +122,22 @@ class ParamsPanel : public wxPanel wxPanel* m_current_tab { nullptr }; + // Builds the selected page's option groups at idle and then shows them for the mode; + // while no tab is selected yet, its first unit selects the default one. + class SettingsPagePrebuild : public LazyBase + { + public: + explicit SettingsPagePrebuild(ParamsPanel& panel) : m_panel(panel) {} + const std::string& name() const override { return m_name; } + bool built() const override; + bool build_step() override; + int prebuild_order() const override { return 0; } + + private: + ParamsPanel& m_panel; + std::string m_name{ "settings_page" }; + } m_settings_page_prebuild{ *this }; + bool m_has_object_config { false }; struct Highlighter @@ -149,6 +166,10 @@ class ParamsPanel : public wxPanel //clear the right page void clear_page(); void OnActivate(); + // The print tab, or the filament tab without one. + void select_default_tab(); + // The settings page's prebuild task. + LazyBase& settings_page_prebuild() { return m_settings_page_prebuild; } void set_active_tab(wxPanel*tab); bool is_active_and_shown_tab(wxPanel*tab); void update_mode(); diff --git a/src/slic3r/GUI/PartPlate.cpp b/src/slic3r/GUI/PartPlate.cpp index 428f45c845..8e2d6ba37b 100644 --- a/src/slic3r/GUI/PartPlate.cpp +++ b/src/slic3r/GUI/PartPlate.cpp @@ -29,6 +29,7 @@ #include "libslic3r/Tesselate.hpp" #include "libslic3r/GCode/ThumbnailData.hpp" #include "libslic3r/Utils.hpp" +#include "libslic3r/LifecycleEvents.hpp" #include "I18N.hpp" #include "GUI_App.hpp" @@ -798,67 +799,8 @@ void PartPlate::render_logo(bool bottom, bool render_cali) { if (!m_partplate_list->render_bedtype_logo) { // render third-party printer texture logo - if (m_partplate_list->m_logo_texture_filename.empty()) { - m_partplate_list->m_logo_texture.reset(); + if (!m_partplate_list->load_logo_texture()) return; - } - - //GLTexture* temp_texture = const_cast(&m_temp_texture); - - if (m_partplate_list->m_logo_texture.get_id() == 0 || m_partplate_list->m_logo_texture.get_source() != m_partplate_list->m_logo_texture_filename) { - m_partplate_list->m_logo_texture.reset(); - - if (boost::algorithm::iends_with(m_partplate_list->m_logo_texture_filename, ".svg")) { - /*// use higher resolution images if graphic card and opengl version allow - GLint max_tex_size = OpenGLManager::get_gl_info().get_max_tex_size(); - if (temp_texture->get_id() == 0 || temp_texture->get_source() != m_texture_filename) { - // generate a temporary lower resolution texture to show while no main texture levels have been compressed - if (!temp_texture->load_from_svg_file(m_texture_filename, false, false, false, max_tex_size / 8)) { - render_default(bottom, false); - return; - } - canvas.request_extra_frame(); - }*/ - - // starts generating the main texture, compression will run asynchronously - GLint max_tex_size = OpenGLManager::get_gl_info().get_max_tex_size(); - GLint logo_tex_size = (max_tex_size < 2048) ? max_tex_size : 2048; - if (!m_partplate_list->m_logo_texture.load_from_svg_file(m_partplate_list->m_logo_texture_filename, true, true, true, logo_tex_size)) { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % m_partplate_list->m_logo_texture_filename; - return; - } - } - else if (boost::algorithm::iends_with(m_partplate_list->m_logo_texture_filename, ".png")) { - // generate a temporary lower resolution texture to show while no main texture levels have been compressed - /* if (temp_texture->get_id() == 0 || temp_texture->get_source() != m_logo_texture_filename) { - if (!temp_texture->load_from_file(m_logo_texture_filename, false, GLTexture::None, false)) { - render_default(bottom, false); - return; - } - canvas.request_extra_frame(); - }*/ - - // starts generating the main texture, compression will run asynchronously - if (!m_partplate_list->m_logo_texture.load_from_file(m_partplate_list->m_logo_texture_filename, true, GLTexture::MultiThreaded, true)) { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % m_partplate_list->m_logo_texture_filename; - return; - } - } - else { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": can not load logo texture from %1%, unsupported format") % m_partplate_list->m_logo_texture_filename; - return; - } - } - else if (m_partplate_list->m_logo_texture.unsent_compressed_data_available()) { - // sends to gpu the already available compressed levels of the main texture - m_partplate_list->m_logo_texture.send_compressed_data_to_gpu(); - - // the temporary texture is not needed anymore, reset it - //if (temp_texture->get_id() != 0) - // temp_texture->reset(); - - //canvas.request_extra_frame(); - } if (m_logo_triangles.is_initialized()) render_logo_texture(m_partplate_list->m_logo_texture, m_logo_triangles, bottom); @@ -2626,11 +2568,20 @@ void PartPlate::set_plate_name(const std::string& name) if (boost::equals(m_name, name)) return; + const std::string previous_name = m_name; m_name = name; if (m_print != nullptr) m_print->set_plate_name(name); invalidate_plate_name_texture(); + + if (m_plater != nullptr && !m_plater->is_loading_project()) { + LifecycleEventContext ctx; + ctx.name = name; + ctx.previous_name = previous_name; + ctx.index = m_plate_index; + fire_lifecycle_event(LifecycleEvent::PlateRenamed, ctx); + } } //get the print's object, result and index @@ -3545,8 +3496,11 @@ void PartPlate::render(const Transform3d& view_matrix, const Transform3d& projec shader->stop_using(); } - if (wxGetApp().show_plate_gridlines() && show_grid) + if (wxGetApp().show_plate_gridlines() && show_grid) { + glsafe(::glDepthMask(bottom ? GL_TRUE : GL_FALSE)); render_grid(bottom); + glsafe(::glDepthMask(GL_TRUE)); + } if (!hide_chrome && !bottom && m_selected && !force_background_color) { if (m_partplate_list) @@ -4219,6 +4173,7 @@ Vec2d PartPlateList::compute_shape_position(int index, int cols) //generate icon textures void PartPlateList::generate_icon_textures() { + m_icon_textures_dark = m_is_dark; // use higher resolution images if graphic card and opengl version allow GLint max_tex_size = OpenGLManager::get_gl_info().get_max_tex_size(), icon_size = max_tex_size / 8; std::string path = resources_dir() + "/images/"; @@ -4434,6 +4389,9 @@ void PartPlateList::release_icon_textures() PartPlateList::is_load_bedtype_textures = false; PartPlateList::is_load_extruder_only_area_textures = false; PartPlateList::is_load_cali_texture = false; + m_next_bedtype_texture = 0; + m_next_extruder_only_area_texture = 0; + m_next_cali_texture = 0; for (int i = 0; i < btCount; i++) { for (auto& part: bed_texture_info[i].parts) { if (part.texture) { @@ -4741,9 +4699,16 @@ int PartPlateList::create_plate(bool adjust_position) if (m_plater) { // In GUI mode - wxGetApp().obj_list()->on_plate_added(plate); + wxGetApp().obj_list()->on_plate_added(plate); } + if (m_plater != nullptr && m_intialized && !m_plater->is_loading_project()) { + LifecycleEventContext ctx; + ctx.name = plate->get_plate_name(); + ctx.index = new_index; + fire_lifecycle_event(LifecycleEvent::PlateCreated, ctx); + } + BOOST_LOG_TRIVIAL(debug) << __FUNCTION__ << boost::format(":created a new plate %1%") % new_index; return new_index; } @@ -4842,6 +4807,7 @@ int PartPlateList::delete_plate(int index) BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(":plate %1%, has an invalid index %2%") % index % plate->get_index(); return -1; } + const std::string plate_name = plate->get_plate_name(); if (m_plater) { // In GUI mode @@ -4924,6 +4890,13 @@ int PartPlateList::delete_plate(int index) delete plate; + if (m_plater != nullptr && m_intialized && !m_plater->is_loading_project()) { + LifecycleEventContext ctx; + ctx.name = plate_name; + ctx.index = index; + fire_lifecycle_event(LifecycleEvent::PlateDeleted, ctx); + } + // FIX: context of BackgroundSliceProcess and gcode preview need to be updated before ObjectList::reload_all_plates(). #if 0 if (m_plater != nullptr) { @@ -5032,6 +5005,7 @@ int PartPlateList::select_plate(int index) if (m_plate_list.empty() || index >= m_plate_list.size()) { return -1; } + const int previous_index = m_current_plate; // BBS: erase unnecessary snapshot if (get_curr_plate_index() != index && m_intialized) { @@ -5058,6 +5032,13 @@ int PartPlateList::select_plate(int index) //wxQueueEvent(m_plater, new SimpleEvent(EVT_GLCANVAS_PLATE_SELECT)); } + if (previous_index != index && m_intialized && m_plater != nullptr && !m_plater->is_loading_project()) { + LifecycleEventContext ctx; + ctx.name = m_plate_list[index]->get_plate_name(); + ctx.index = index; + fire_lifecycle_event(LifecycleEvent::PlateSelected, ctx); + } + return 0; } @@ -5966,12 +5947,7 @@ void PartPlateList::render(const Transform3d& view_matrix, const Transform3d& pr plate_hover_action = hover_id % PartPlate::GRABBER_COUNT; } - static bool last_dark_mode_status = m_is_dark; - if (m_is_dark != last_dark_mode_status) { - last_dark_mode_status = m_is_dark; - generate_icon_textures(); - } else if(m_del_texture.get_id() == 0) - generate_icon_textures(); + load_icon_textures(); for (it = m_plate_list.begin(); it != m_plate_list.end(); it++) { int current_index = (*it)->get_index(); if (only_current && (current_index != m_current_plate)) @@ -6113,6 +6089,8 @@ bool PartPlateList::set_shapes(const Pointfs &shape, } is_load_bedtype_textures = false; //reload textures is_load_extruder_only_area_textures = false; // reload textures + m_next_bedtype_texture = 0; + m_next_extruder_only_area_texture = 0; calc_bounding_boxes(); update_logo_texture_filename(texture_filename); @@ -7053,53 +7031,120 @@ bool PartPlateList::init_extruder_only_area_info() return true; } -void PartPlateList::load_bedtype_textures() +static GLint logo_texture_size() { - if (PartPlateList::is_load_bedtype_textures) return; - - init_bed_type_info(); - GLint max_tex_size = OpenGLManager::get_gl_info().get_max_tex_size(); - GLint logo_tex_size = (max_tex_size < 2048) ? max_tex_size : 2048; - for (int i = 0; i < (unsigned int)btCount; ++i) { - for (int j = 0; j < bed_texture_info[i].parts.size(); j++) { - std::string filename = resources_dir() + "/images/" + bed_texture_info[i].parts[j].filename; - if (boost::filesystem::exists(filename)) { - PartPlateList::bed_texture_info[i].parts[j].texture = new GLTexture(); - if (!PartPlateList::bed_texture_info[i].parts[j].texture->load_from_svg_file(filename, true, true, true, logo_tex_size)) { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % filename; - } - } else { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % filename; - } - } - } - PartPlateList::is_load_bedtype_textures = true; + return std::min(OpenGLManager::get_gl_info().get_max_tex_size(), 2048); } -void PartPlateList::load_extruder_only_area_textures() { - if (PartPlateList::is_load_extruder_only_area_textures) return; +// Loads the texture of the next untried part across the parts of `infos`, in order, advancing +// `next`; false once every part has been tried. +static bool load_next_part_texture(PartPlateList::BedTextureInfo* infos, size_t count, size_t& next, bool compress_and_filter) +{ + size_t k = next; + for (size_t i = 0; i < count; ++i) { + if (k >= infos[i].parts.size()) { + k -= infos[i].parts.size(); + continue; + } + ++next; + PartPlateList::BedTextureInfo::TexturePart& part = infos[i].parts[k]; + const std::string filename = resources_dir() + "/images/" + part.filename; + if (boost::filesystem::exists(filename)) { + part.texture = new GLTexture(); + if (!part.texture->load_from_svg_file(filename, true, compress_and_filter, compress_and_filter, logo_texture_size())) + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load texture from %1% failed!") % filename; + } else { + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load texture from %1% failed!") % filename; + } + return true; + } + return false; +} - auto ok = init_extruder_only_area_info(); - if (!ok) { +void PartPlateList::load_bedtype_textures() +{ + while (load_next_bedtype_texture()) {} +} + +bool PartPlateList::load_next_bedtype_texture() +{ + if (PartPlateList::is_load_bedtype_textures) + return false; + if (m_next_bedtype_texture == 0) + init_bed_type_info(); + if (load_next_part_texture(bed_texture_info, btCount, m_next_bedtype_texture, true)) + return true; + PartPlateList::is_load_bedtype_textures = true; + return false; +} + +bool PartPlateList::load_logo_texture() +{ + if (m_logo_texture_filename.empty()) { + m_logo_texture.reset(); + return false; + } + + if (m_logo_texture.get_id() != 0 && m_logo_texture.get_source() == m_logo_texture_filename) { + if (m_logo_texture.unsent_compressed_data_available()) + // sends to gpu the already available compressed levels of the main texture + m_logo_texture.send_compressed_data_to_gpu(); + return true; + } + + m_logo_texture.reset(); + // starts generating the main texture, compression will run asynchronously + if (boost::algorithm::iends_with(m_logo_texture_filename, ".svg")) { + if (!m_logo_texture.load_from_svg_file(m_logo_texture_filename, true, true, true, logo_texture_size())) { + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % m_logo_texture_filename; + return false; + } + } + else if (boost::algorithm::iends_with(m_logo_texture_filename, ".png")) { + if (!m_logo_texture.load_from_file(m_logo_texture_filename, true, GLTexture::MultiThreaded, true)) { + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % m_logo_texture_filename; + return false; + } + } + else { + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": can not load logo texture from %1%, unsupported format") % m_logo_texture_filename; + return false; + } + return true; +} + +void PartPlateList::load_icon_textures() +{ + if (!icon_textures_loaded()) + generate_icon_textures(); +} + +bool PartPlateList::load_next_plate_texture() +{ + if (!render_bedtype_logo) { + load_logo_texture(); + return false; + } + return load_next_bedtype_texture() || load_next_cali_texture() || load_next_extruder_only_area_texture(); +} + +void PartPlateList::load_extruder_only_area_textures() +{ + while (load_next_extruder_only_area_texture()) {} +} + +bool PartPlateList::load_next_extruder_only_area_texture() +{ + if (PartPlateList::is_load_extruder_only_area_textures) + return false; + if (m_next_extruder_only_area_texture == 0 && !init_extruder_only_area_info()) { PartPlateList::is_load_extruder_only_area_textures = true; - return; - } - GLint max_tex_size = OpenGLManager::get_gl_info().get_max_tex_size(); - GLint logo_tex_size = (max_tex_size < 2048) ? max_tex_size : 2048; - for (int i = 0; i < (unsigned int) ExtruderOnlyAreaType::btAreaCount; ++i) { - for (int j = 0; j < extruder_only_area_info[i].parts.size(); j++) { - std::string filename = resources_dir() + "/images/" + extruder_only_area_info[i].parts[j].filename; - if (boost::filesystem::exists(filename)) { - PartPlateList::extruder_only_area_info[i].parts[j].texture = new GLTexture(); - if (!PartPlateList::extruder_only_area_info[i].parts[j].texture->load_from_svg_file(filename, true, false, false, logo_tex_size)) { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % filename; - } - } else { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load logo texture from %1% failed!") % filename; - } - } + return false; } + if (load_next_part_texture(extruder_only_area_info, (size_t) ExtruderOnlyAreaType::btAreaCount, m_next_extruder_only_area_texture, false)) + return true; PartPlateList::is_load_extruder_only_area_textures = true; + return false; } void PartPlateList::init_cali_texture_info() @@ -7114,26 +7159,19 @@ void PartPlateList::init_cali_texture_info() void PartPlateList::load_cali_textures() { - if (PartPlateList::is_load_cali_texture) return; + while (load_next_cali_texture()) {} +} - init_cali_texture_info(); - GLint max_tex_size = OpenGLManager::get_gl_info().get_max_tex_size(); - GLint logo_tex_size = (max_tex_size < 2048) ? max_tex_size : 2048; - for (int i = 0; i < (unsigned int)btCount; ++i) { - for (int j = 0; j < cali_texture_info.parts.size(); j++) { - std::string filename = resources_dir() + "/images/" + cali_texture_info.parts[j].filename; - if (boost::filesystem::exists(filename)) { - PartPlateList::cali_texture_info.parts[j].texture = new GLTexture(); - if (!PartPlateList::cali_texture_info.parts[j].texture->load_from_svg_file(filename, true, true, true, logo_tex_size)) { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load cali texture from %1% failed!") % filename; - } - } - else { - BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << boost::format(": load cali texture from %1% failed!") % filename; - } - } - } +bool PartPlateList::load_next_cali_texture() +{ + if (PartPlateList::is_load_cali_texture) + return false; + if (m_next_cali_texture == 0) + init_cali_texture_info(); + if (load_next_part_texture(&cali_texture_info, 1, m_next_cali_texture, true)) + return true; PartPlateList::is_load_cali_texture = true; + return false; } void PartPlateList::on_extruder_count_changed(int extruder_count) diff --git a/src/slic3r/GUI/PartPlate.hpp b/src/slic3r/GUI/PartPlate.hpp index 9bee917243..52a277d0e3 100644 --- a/src/slic3r/GUI/PartPlate.hpp +++ b/src/slic3r/GUI/PartPlate.hpp @@ -644,6 +644,7 @@ class PartPlateList : public ObjectBase std::string m_hover_tooltip; bool m_is_dark = false; + bool m_icon_textures_dark = false; int m_filament_count = 1; @@ -943,12 +944,25 @@ public: bool calc_extruder_only_area(Rect &left_only_rect, Rect &right_only_rect); void init_bed_type_info(); bool init_extruder_only_area_info(); + // Each load_*_textures() loads whatever of its set is not loaded yet; each load_next_*() + // loads one texture and returns false once none remain. void load_bedtype_textures(); + bool load_next_bedtype_texture(); void load_extruder_only_area_textures(); + bool load_next_extruder_only_area_texture(); + // Starts loading the printer's logo texture, or sends the levels compressed since; false when + // there is no logo to draw. + bool load_logo_texture(); void show_cali_texture(bool show = true); void init_cali_texture_info(); void load_cali_textures(); + bool load_next_cali_texture(); + bool icon_textures_loaded() const { return m_del_texture.get_id() != 0 && m_icon_textures_dark == m_is_dark; } + void load_icon_textures(); + // Loads the next bed-type, calibration or extruder-area texture, or the logo, which rendering + // otherwise loads on first use; false once none remain. + bool load_next_plate_texture(); void on_extruder_count_changed(int extruder_count); @@ -960,6 +974,13 @@ public: BedTextureInfo bed_texture_info[btCount]; BedTextureInfo cali_texture_info; BedTextureInfo extruder_only_area_info[(unsigned char) Slic3r::ExtruderOnlyAreaType::btAreaCount]; + +private: + // The next part to load in each texture set, counted across the set's parts in order; reset + // with the set's is_load_* flag. + size_t m_next_bedtype_texture{ 0 }; + size_t m_next_cali_texture{ 0 }; + size_t m_next_extruder_only_area_texture{ 0 }; }; } // namespace GUI diff --git a/src/slic3r/GUI/PartSkipDialog.cpp b/src/slic3r/GUI/PartSkipDialog.cpp index 9bd6687757..860779ead4 100644 --- a/src/slic3r/GUI/PartSkipDialog.cpp +++ b/src/slic3r/GUI/PartSkipDialog.cpp @@ -148,7 +148,7 @@ PartSkipDialog::PartSkipDialog(wxWindow *parent) : DPIDialog(parent, wxID_ANY, _ m_line->SetBackgroundColour(wxColor(238, 238, 238)); m_list_view = new wxScrolledWindow(m_book_third_panel, wxID_ANY, wxDefaultPosition, wxSize(267, -1), wxHSCROLL | wxVSCROLL); - m_list_view->SetScrollRate(5, 5); + m_list_view->SetScrollRate(5, FromDIP(30)); m_list_view->SetMinSize(wxSize(FromDIP(267), FromDIP(378))); m_list_view->SetMaxSize(wxSize(FromDIP(267), FromDIP(378))); m_list_view->SetBackgroundColour(*wxWHITE); diff --git a/src/slic3r/GUI/Plater.cpp b/src/slic3r/GUI/Plater.cpp index d8457454b5..1b23642bbe 100644 --- a/src/slic3r/GUI/Plater.cpp +++ b/src/slic3r/GUI/Plater.cpp @@ -57,6 +57,7 @@ #include #include "libslic3r/libslic3r.h" +#include "libslic3r/LifecycleEvents.hpp" #include "libslic3r/Format/STL.hpp" #include "libslic3r/Format/DRC.hpp" #include "libslic3r/Format/STEP.hpp" @@ -87,6 +88,7 @@ #ifdef __WXGTK__ #include "LinuxDisplayBackend.hpp" #endif +#include "AuiPaneLayout.hpp" #include "GUI_Utils.hpp" #include "GUI_Factories.hpp" #include "wxExtensions.hpp" @@ -604,15 +606,50 @@ private: bool m_enabled{false}; }; +// The nozzle rows are set in the small body font their "T1" prefix and diameter readout use, so the +// combos of a row drop from the Body_14 they are created with to match, instead of towering over +// the labels next to them. +static void use_nozzle_row_font(ComboBox *combo) +{ + // A read-only combo draws its value with the font of the TextInput it is built on, and its + // dropped list carries a font of its own. + combo->SetFont(Label::Body_10); + combo->GetDropDown().SetFont(Label::Body_10); + + // A row is as tall as the tags of the variant switch: a line of Body_10 text plus the 3 points of + // padding they put above and below it. TextInput::messureSize() instead sizes a combo as its + // (hidden) text control plus 8, and on macOS that control's best height is a fixed 16 points + // whatever font it carries, so the box would keep the height of the Body_14 it was created with. + // Handing the control the height the row asks for, less those 8 points, keeps messureSize()'s own + // arithmetic landing on the small box however often it re-measures. + const int row_height = combo->GetTextExtent("0.4 mm").y + 2 * combo->FromDIP(3); + auto *text_ctrl = combo->GetTextCtrl(); + text_ctrl->SetFont(Label::Body_10); + text_ctrl->SetInitialSize(wxSize(text_ctrl->GetBestSize().x, row_height - 8)); + + combo->SetMinSize(wxSize(combo->GetMinSize().x, row_height)); + combo->SetSize(wxSize(combo->GetSize().x, row_height)); +} + struct ExtruderGroup : StaticBox { + // One nozzle row: the tool prefix ("T1"…"Tn", shown only when the group lists several + // extruders) plus the nozzle readout and flow combo of a single extruder. Rows are appended on + // demand and never destroyed, so an event handler may capture its row index for the lifetime + // of the group. + struct NozzleRow + { + Label * prefix = nullptr; + Label * diameter_label = nullptr; // read-only nozzle diameter of this extruder + ComboBox * flow = nullptr; + }; + ExtruderGroup(wxWindow * parent, int index, wxString const &title); wxBoxSizer * sizer = nullptr; HoverLabel * hover_label = nullptr; wxStaticText* ams_label{nullptr}; ScalableButton * btn_edit = nullptr; ComboBox * combo_diameter = nullptr; - ComboBox * combo_flow = nullptr; AMSPreview * ams[4] = {nullptr}; wxStaticText *ams_not_installed_msg{nullptr}; ScalableButton * btn_up{nullptr}; @@ -626,6 +663,23 @@ struct ExtruderGroup : StaticBox std::vector ams_1; wxString diameter; + std::vector rows; // rows[0] always exists, one row per extruder when multi + size_t nozzle_row_count = 0; // rows currently shown + wxBoxSizer * row_columns[2] = {}; // row i is dealt into column i % 2 + int group_index = -1; // ctor index, the extruder a single-row group edits + + // Show `count` nozzle rows, one per extruder, each prefixed with T when count > 1. + void SetNozzleRowCount(size_t count); + size_t NozzleRowCount() const { return nozzle_row_count; } + // Nozzle diameter readout of the shown rows, one value per extruder. A listing card cannot edit + // it: the diameter belongs to the machine variant the printer preset selects, not to the extruder. + void SetRowDiameters(const std::vector &diameters); + + NozzleRow create_nozzle_row(); + // Widths the prefix and diameter labels of the visible rows so that the flow combos of a column + // line up. + void update_row_widths(); + void set_ams_count(int n4, int n1) { if (n4 == ams_n4 && n1 == ams_n1) @@ -656,7 +710,12 @@ struct ExtruderGroup : StaticBox btn_up->msw_rescale(); btn_down->msw_rescale(); combo_diameter->Rescale(); - combo_flow->Rescale(); + for (const NozzleRow &row : rows) { + row.prefix->SetFont(Label::Body_10.Bold()); + row.diameter_label->SetFont(Label::Body_10); + row.flow->Rescale(); + } + update_row_widths(); for (int i = 0; i < 4; ++i) ams[i]->msw_rescale(); } @@ -667,6 +726,10 @@ struct ExtruderGroup : StaticBox hover_label->sys_color_changed(); if (btn_edit) btn_edit->SetBackgroundColour(extruder_group_chip_bg()); + for (const NozzleRow &row : rows) { + row.prefix->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#363636"))); + row.diameter_label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#363636"))); + } Refresh(); } }; @@ -690,11 +753,12 @@ struct Sidebar::priv ScalableButton * btn_edit_printer = nullptr; ScalableButton * btn_connect_printer = nullptr; - // Nozzle diameter + // Printer variant switch, titled "Variant": the combo lists the variants (nozzle sizes) of the + // current machine model and picking one switches the printer preset. StaticBox * panel_nozzle_dia = nullptr; Label * label_nozzle_title= nullptr; ComboBox * combo_nozzle_dia = nullptr; - Label * label_nozzle_type = nullptr; + Label * label_nozzle_type = nullptr; // read-only nozzle material, one-row layouts only // Printer - bed StaticBox * panel_printer_bed = nullptr; @@ -808,6 +872,8 @@ struct Sidebar::priv // otherwise reuses the app_config-cached option when the machine's nozzle config is unchanged. std::optional get_nozzle_options(MachineObject* obj, int extruder_count, bool support_multi_nozzle, bool is_manual); bool switch_diameter(bool single); + // Switch to the printer preset offering `diameter`. + bool switch_diameter_to(const wxString &diameter); void update_sync_status(const MachineObject* obj); // Filament Track Switch (H2-family accessory): true only when the connected printer is the @@ -917,11 +983,19 @@ void Sidebar::priv::layout_printer(bool isBBL, bool isDual) int extruder_count = 0; const bool has_flow_variant = cfg.support_different_extruders(extruder_count); - panel_nozzle_dia->Show(!has_flow_variant); - extruder_single_sizer->Show(has_flow_variant); + // ORCA: a non-Bambu printer with several extruders lists one nozzle row per tool; Bambu's own + // multi-extruder printers keep the left/right pair above. + const bool multi_extruder_rows = !preset_bundle.is_bbl_vendor() && extruder_count > 1; + + // The variant box switches the machine variant. The card below lists the nozzles when there + // are flow variants to choose or several extruders to show; otherwise the box says it all. + panel_nozzle_dia->Show(true); + extruder_single_sizer->Show(has_flow_variant || multi_extruder_rows); + single_extruder->SetNozzleRowCount(multi_extruder_rows ? size_t(extruder_count) : 1); } else { panel_nozzle_dia->Show(false); extruder_single_sizer->Show(false); + single_extruder->SetNozzleRowCount(1); } // ORCA ensure printer section is visible after changing printer from printer selection dialog @@ -1318,7 +1392,7 @@ public: }; ExtruderGroup::ExtruderGroup(wxWindow * parent, int index, wxString const &title) - : StaticBox(parent) + : StaticBox(parent), group_index(index) { SetFont(Label::Body_10); SetForegroundColour(wxColour("#CECECE")); @@ -1331,29 +1405,13 @@ ExtruderGroup::ExtruderGroup(wxWindow * parent, int index, wxString const &title hover_label = new HoverLabel(this, title); hover_label->SetPosition(wxPoint(FromDIP(PRINTER_PANEL_RADIUS), 0)); // position it without putting in a sizer so it will look like title - // Nozzle + // Nozzle. Only the dual left/right cards show this combo: it is how they ask which nozzle the + // project should print with. Every other card reads the diameter out as text. auto combo_diameter = new ComboBox(this, wxID_ANY, wxString(""), wxDefaultPosition, wxDefaultSize, 0, nullptr, wxCB_READONLY); this->combo_diameter = combo_diameter; combo_diameter->SetToolTip(_L("Diameter")); - - // Flow - auto combo_flow = new ComboBox(this, wxID_ANY, wxString(""), wxDefaultPosition, wxDefaultSize, 0, nullptr, wxCB_READONLY); - combo_flow->GetDropDown().SetUseContentWidth(true); - combo_flow->Bind(wxEVT_COMBOBOX, [index, combo_flow](wxCommandEvent &evt) { - auto printer_tab = dynamic_cast(wxGetApp().get_tab(Preset::TYPE_PRINTER)); - NozzleVolumeType volume_type = NozzleVolumeType(intptr_t(combo_flow->GetClientData(evt.GetInt()))); - printer_tab->set_extruder_volume_type(index, volume_type); - auto plater = GUI::wxGetApp().plater(); - if (plater) { - // A new Flow type invalidates the per-filament volume choices stored on the - // plates for this extruder; rewrite them so the next apply/grouping sees the - // selected volume instead of a stale one. - plater->update_filament_volume_map(index, static_cast(volume_type)); - plater->update_machine_sync_status(); - } - }); - this->combo_flow = combo_flow; - combo_flow->SetToolTip(_L("Flow")); + combo_diameter->Show(index >= 0); + use_nozzle_row_font(combo_diameter); // AMS auto ams_panel = new wxPanel(this, wxID_ANY); @@ -1439,10 +1497,6 @@ ExtruderGroup::ExtruderGroup(wxWindow * parent, int index, wxString const &title btn_down->Hide(); wxBoxSizer *vsizer = new wxBoxSizer(wxVERTICAL); - wxBoxSizer *hsizer = new wxBoxSizer(wxHORIZONTAL); - - hsizer->Add(combo_diameter, 1, wxRIGHT, FromDIP(5)); - hsizer->Add(combo_flow , 1); vsizer->AddSpacer(FromDIP(16)); // spacing for title and control if (index < 0) { @@ -1451,14 +1505,137 @@ ExtruderGroup::ExtruderGroup(wxWindow * parent, int index, wxString const &title vsizer->Add(ams_panel, 0, wxEXPAND | wxLEFT | wxRIGHT , FromDIP(5)); vsizer->AddSpacer(FromDIP(2)); } - vsizer->Add(hsizer, 0, wxEXPAND | wxLEFT | wxRIGHT | wxBOTTOM, FromDIP(5)); + // Nozzle rows. The first one is the only one for a printer whose nozzles are not listed + // individually; a multi-extruder printer grows one row per tool (see SetNozzleRowCount). + // The rows are dealt into two columns, which halves the height of a long tool list; the second + // column empties itself when there is a single row, so a one-row card still spans the width. + auto rows_sizer = new wxBoxSizer(wxHORIZONTAL); + for (wxBoxSizer *&column : row_columns) { + column = new wxBoxSizer(wxVERTICAL); + rows_sizer->Add(column, 1, wxEXPAND); + } + vsizer->Add(rows_sizer, 0, wxEXPAND); + sizer = vsizer; // the floating filament-switch icon positions itself against this card SetSizer(vsizer); + SetNozzleRowCount(1); + Layout(); AMSCountPopupWindow::UpdateAMSCount(index < 0 ? 0 : index, this); } +ExtruderGroup::NozzleRow ExtruderGroup::create_nozzle_row() +{ + const size_t row_index = rows.size(); + NozzleRow row; + + row.prefix = new Label(this, Label::Body_10.Bold()); + row.prefix->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#363636"))); + row.prefix->SetLabelText(wxString::Format("T%d", int(row_index) + 1)); + row.prefix->Hide(); + + row.diameter_label = new Label(this, Label::Body_10); + row.diameter_label->SetForegroundColour(StateColor::darkModeColorFor(wxColour("#363636"))); + row.diameter_label->Hide(); + + auto combo_flow = new ComboBox(this, wxID_ANY, wxString(""), wxDefaultPosition, wxDefaultSize, 0, nullptr, wxCB_READONLY); + combo_flow->GetDropDown().SetUseContentWidth(true); + combo_flow->Bind(wxEVT_COMBOBOX, [this, row_index, combo_flow](wxCommandEvent &evt) { + // A one-row card edits the extruder it was created for, a multi-row card one extruder per row. + const int index = nozzle_row_count > 1 ? int(row_index) : group_index; + auto printer_tab = dynamic_cast(wxGetApp().get_tab(Preset::TYPE_PRINTER)); + NozzleVolumeType volume_type = NozzleVolumeType(intptr_t(combo_flow->GetClientData(evt.GetInt()))); + printer_tab->set_extruder_volume_type(index, volume_type); + auto plater = GUI::wxGetApp().plater(); + if (plater) { + // A new Flow type invalidates the per-filament volume choices stored on the + // plates for this extruder; rewrite them so the next apply/grouping sees the + // selected volume instead of a stale one. + plater->update_filament_volume_map(index, static_cast(volume_type)); + plater->update_machine_sync_status(); + } + }); + combo_flow->SetToolTip(_L("Flow")); + row.flow = combo_flow; + use_nozzle_row_font(combo_flow); + + auto row_sizer = new wxBoxSizer(wxHORIZONTAL); + row_sizer->Add(row.prefix, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, FromDIP(3)); + if (row_index == 0) + row_sizer->Add(combo_diameter, 1, wxRIGHT, FromDIP(5)); + row_sizer->Add(row.diameter_label, 0, wxALIGN_CENTER_VERTICAL | wxRIGHT, FromDIP(5)); + row_sizer->Add(row.flow, 1); + // Row-major: T1 T2 on the first line, T3 T4 on the second, and so on. + row_columns[row_index % 2]->Add(row_sizer, 0, wxEXPAND | wxLEFT | wxRIGHT | wxBOTTOM, FromDIP(5)); + + return row; +} + +void ExtruderGroup::update_row_widths() +{ + // Measured from the rows on screen rather than fixed, so no gap is reserved for a "T10" or a + // "0.25 mm" that no row carries while the flow combos of a column still line up. + wxSize prefix_width(0, -1); + wxSize diameter_width(0, -1); + for (const NozzleRow &row : rows) { + if (row.prefix->IsShown()) + prefix_width.x = std::max(prefix_width.x, row.prefix->GetTextExtent(row.prefix->GetLabelText()).x); + if (row.diameter_label->IsShown()) + diameter_width.x = std::max(diameter_width.x, row.diameter_label->GetTextExtent(row.diameter_label->GetLabelText()).x); + } + for (const NozzleRow &row : rows) { + row.prefix->SetMinSize(prefix_width); + row.diameter_label->SetMinSize(diameter_width); + } +} + +void ExtruderGroup::SetRowDiameters(const std::vector &diameters) +{ + for (size_t i = 0; i < std::min(nozzle_row_count, diameters.size()); ++i) { + // Spelled like the calibration dialogs spell a nozzle diameter, "0.4 mm". + const wxString text = from_u8(get_diameter_string(diameters[i])) + " mm"; + rows[i].diameter_label->SetLabelText(text); + rows[i].diameter_label->SetToolTip(text); + } + update_row_widths(); + Layout(); +} + +void ExtruderGroup::SetNozzleRowCount(size_t count) +{ + const size_t row_count = std::min(count, size_t(MAXIMUM_EXTRUDER_NUMBER)); + if (row_count == nozzle_row_count) + return; + nozzle_row_count = row_count; + + // Every row names its tool as soon as there is more than one, so a single-nozzle card keeps the + // plain "Nozzle" look. A row is shown by showing its widgets: a sizer item holding a sub-sizer + // reports itself as shown while any of its windows is, so hiding the sub-sizer alone would + // leave the row in the layout. + for (size_t i = 0; i < row_count; ++i) { + if (i >= rows.size()) + rows.push_back(create_nozzle_row()); + rows[i].prefix->Show(row_count > 1); + rows[i].diameter_label->Show(group_index < 0); // the dual left/right cards show combo_diameter + // The flow combo's own visibility is decided with its choices, see update_extruder_variant. + } + for (size_t i = row_count; i < rows.size(); ++i) { + rows[i].prefix->Hide(); + rows[i].diameter_label->Hide(); + rows[i].flow->Hide(); + } + + // The rows just changed: re-measure them, then let the card and its containers give it the new room. + update_row_widths(); + Layout(); + if (wxWindow *parent = GetParent()) { + parent->Layout(); + if (wxWindow *grand_parent = parent->GetParent()) + grand_parent->Layout(); + } +} + void ExtruderGroup::update_ams() { static AMSinfo info4; @@ -1587,9 +1764,19 @@ bool Sidebar::priv::switch_diameter(bool single) diameter = diameter_left; } } - + + return switch_diameter_to(diameter); +} + +bool Sidebar::priv::switch_diameter_to(const wxString &diameter) +{ // ORCA: Check if the selected diameter matches the current nozzle diameter in the config Preset& printer_preset = wxGetApp().preset_bundle->printers.get_edited_preset(); + // The combo lists printer variants, and the variant of a mixed-nozzle machine ("0.4+0.6") is no + // single extruder's diameter, so the preset's own variant answers first. + if (printer_preset.config.opt_string("printer_variant") == diameter.ToStdString()) { + return true; + } auto* nozzle_diameter = dynamic_cast(printer_preset.config.option("nozzle_diameter")); if (nozzle_diameter && nozzle_diameter->size() > 0) { auto current_nozzle_dia = get_diameter_string(nozzle_diameter->values[0]); @@ -2678,7 +2865,8 @@ Sidebar::Sidebar(Plater *parent) p->combo_nozzle_dia->wxEvtHandler::ProcessEvent(evt); }); - p->label_nozzle_title = new Label(p->panel_nozzle_dia, _L("Nozzle"), LB_PROPAGATE_MOUSE_EVENT); + // "Variant", not "Nozzle": picking one switches the printer preset (see panel_nozzle_dia). + p->label_nozzle_title = new Label(p->panel_nozzle_dia, _L("Variant"), LB_PROPAGATE_MOUSE_EVENT); p->label_nozzle_title->SetFont(Label::Body_10); p->combo_nozzle_dia = new ComboBox(p->panel_nozzle_dia, wxID_ANY, wxString(""), wxDefaultPosition, wxDefaultSize, 0, nullptr, wxCB_READONLY); @@ -2687,12 +2875,15 @@ Sidebar::Sidebar(Plater *parent) p->combo_nozzle_dia->SetMinSize(FromDIP(wxSize(PRINTER_PANEL_SIZE.GetWidth() - 4, 26))); // requires a static value in here p->combo_nozzle_dia->SetMaxSize(FromDIP(wxSize(PRINTER_PANEL_SIZE.GetWidth() - 4, 26))); // using -1 with wxEXPAND has issues p->combo_nozzle_dia->Bind(wxEVT_COMBOBOX, [this](auto &e) { - auto evt_combo = (*p->single_extruder).combo_diameter; - evt_combo->SetSelection(e.GetSelection()); - wxCommandEvent evt(wxEVT_COMBOBOX, evt_combo->GetId()); - evt.SetEventObject(evt_combo); - evt.SetInt(e.GetSelection()); - wxPostEvent(evt_combo, evt); + // This box is the machine-variant selector, so it switches the printer preset directly + // instead of feeding an extruder card's combo. Deferred, because switching preset + // rebuilds this very combo. + const wxString diameter = p->combo_nozzle_dia->GetValue(); + p->combo_nozzle_dia->CallAfter([this, diameter]() { + p->is_switching_diameter = true; + p->switch_diameter_to(diameter); + p->is_switching_diameter = false; + }); e.Skip(); }); // ORCA paint whole combobox on focus @@ -3048,8 +3239,7 @@ Sidebar::Sidebar(Plater *parent) // add filament content p->m_panel_filament_content = new wxScrolledWindow(p->m_filament_area_wrapper, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL ); - p->m_panel_filament_content->SetScrollbars(0, 100, 1, 2); - p->m_panel_filament_content->SetScrollRate(0, 5); + p->m_panel_filament_content->SetScrollRate(0, FromDIP(20)); //p->m_panel_filament_content->SetMaxSize(wxSize{-1, FromDIP(174)}); p->m_panel_filament_content->SetBackgroundColour(wxColour(255, 255, 255)); @@ -3141,8 +3331,7 @@ Sidebar::Sidebar(Plater *parent) // 3) Mixed filament rows, in their own scroll area so a long mixed list does not // push the physical filament list off screen. p->m_mixed_scroll_area = new wxScrolledWindow(p->m_filament_area_wrapper, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL); - p->m_mixed_scroll_area->SetScrollbars(0, 100, 1, 2); - p->m_mixed_scroll_area->SetScrollRate(0, 5); + p->m_mixed_scroll_area->SetScrollRate(0, FromDIP(20)); p->m_mixed_scroll_area->SetBackgroundColour(StateColor::darkModeColorFor(*wxWHITE)); { auto* mix_scroll_sizer = new wxBoxSizer(wxVERTICAL); @@ -3674,8 +3863,16 @@ void Sidebar::update_presets(Preset::Type preset_type) auto diameters = wxGetApp().preset_bundle->printers.diameters_of_selected_printer(); auto diameter = printer_preset.config.opt_string("printer_variant"); auto extruder_max_nozzle_count = printer_preset.config.option("extruder_max_nozzle_count"); - auto update_extruder_variant = [printer_model, extruders_def, extruders, nozzle_volumes_def, nozzle_volumes, extruder_variants,diameter,extruder_max_nozzle_count](ExtruderGroup & extruder, int index) { - extruder.combo_flow->Clear(); + auto update_extruder_variant = [printer_model, extruders_def, extruders, nozzle_volumes_def, nozzle_volumes, extruder_variants,diameter,extruder_max_nozzle_count](ExtruderGroup & extruder, size_t row, int index) { + ComboBox *combo_flow = extruder.rows[row].flow; + combo_flow->Clear(); + // A profile may leave the per-extruder lists shorter than the nozzle count (they are + // padded when the printer is loaded, but a hand-written preset need not be). + if (index >= int(extruder_variants->values.size()) || index >= int(extruders->values.size()) || + index >= int(nozzle_volumes->values.size())) { + combo_flow->Hide(); + return; + } auto type = extruders_def->enum_labels[extruders->values[index]]; int select = -1; for (size_t i = 0; i < nozzle_volumes_def->enum_labels.size(); ++i) { @@ -3685,26 +3882,36 @@ void Sidebar::update_presets(Preset::Type preset_type) if (boost::algorithm::contains(extruder_variants->values[index], type + " " + nozzle_volumes_def->enum_labels[i]) || (extruder_max_nozzle_count->get_at(index) > 1 && extruder_max_nozzle_count->get_at(index) != ConfigOptionIntsNullable::nil_value() && nozzle_volumes_def->enum_keys_map->at(nozzle_volumes_def->enum_values[i]) == nvtHybrid)) { - if (nozzle_volumes_def->enum_keys_map->at(nozzle_volumes_def->enum_values[i]) == NozzleVolumeType::nvtHighFlow &&(diameter == "0.2" || + auto cur_volume_type = nozzle_volumes_def->enum_keys_map->at(nozzle_volumes_def->enum_values[i]); + // Defensive: profiles restrict E3D to 0.4 / 0.6; keep it out elsewhere. + if (cur_volume_type == NozzleVolumeType::nvtE3DHighFlow && diameter != "0.4" && diameter != "0.6") + continue; + if (cur_volume_type == NozzleVolumeType::nvtHighFlow && (diameter == "0.2" || is_skip_high_flow_printer(printer_model))) continue; - if (nozzle_volumes->values[index] == i) - select = extruder.combo_flow->GetCount(); - extruder.combo_flow->Append(_L(nozzle_volumes_def->enum_labels[i]), {}, (void*)i); + // The client data is the enum value, not the label position: E3D High Flow is 5 + // but sits at position 4, and a position would write an invalid type. + if (nozzle_volumes->values[index] == cur_volume_type) + select = combo_flow->GetCount(); + combo_flow->Append(_L(nozzle_volumes_def->enum_labels[i]), {}, (void*)(intptr_t)cur_volume_type); } } if (select == -1) - select = extruder.combo_flow->GetCount() - 1; - extruder.combo_flow->SetSelection(select); + select = combo_flow->GetCount() - 1; + combo_flow->SetSelection(select); + // No flow variant for this extruder: the diameter keeps the whole row. + combo_flow->Show(combo_flow->GetCount() > 0); }; auto update_extruder_diameter = [&diameters, &nozzle_diameter](int extruder_index,ExtruderGroup & extruder) { extruder.combo_diameter->Clear(); + if (extruder_index >= int(nozzle_diameter->values.size())) + return; int select = -1; // ORCA get the actual nozzle diameter from printer config auto nozzle_dia = get_diameter_string(nozzle_diameter->values[extruder_index]); // ORCA try to add nozzle diameter from config if list is empty. fixes blank nozzle combo box when preset has no alias - if(diameters[0].empty() && !nozzle_dia.empty()){ + if(!diameters.empty() && diameters[0].empty() && !nozzle_dia.empty()){ diameters[0] = nozzle_dia; } // Orca: Check if the actual nozzle diameter exists in the list, if not add it as a custom option @@ -3720,14 +3927,15 @@ void Sidebar::update_presets(Preset::Type preset_type) extruder.diameter = nozzle_dia; }; auto image_path = get_cur_select_bed_image(); - if (is_dual_extruder) { + const bool multi_extruder_rows = p->single_extruder->NozzleRowCount() > 1; + if (is_dual_extruder && !multi_extruder_rows) { std::string printer_type = printer_preset.get_printer_type(wxGetApp().preset_bundle); p->left_extruder->SetTitle(_L(DevPrinterConfigUtil::get_toolhead_display_name(printer_type, DEPUTY_EXTRUDER_ID, ToolHeadComponent::Nozzle, ToolHeadNameCase::TitleCase))); p->right_extruder->SetTitle(_L(DevPrinterConfigUtil::get_toolhead_display_name(printer_type, MAIN_EXTRUDER_ID, ToolHeadComponent::Nozzle, ToolHeadNameCase::TitleCase))); AMSCountPopupWindow::UpdateAMSCount(0, p->left_extruder); AMSCountPopupWindow::UpdateAMSCount(1, p->right_extruder); - update_extruder_variant(*p->left_extruder, 0); - update_extruder_variant(*p->right_extruder, 1); + update_extruder_variant(*p->left_extruder, 0, 0); + update_extruder_variant(*p->right_extruder, 0, 1); //if (!p->is_switching_diameter) { update_extruder_diameter(0, *p->left_extruder); update_extruder_diameter(1, *p->right_extruder); @@ -3735,15 +3943,27 @@ void Sidebar::update_presets(Preset::Type preset_type) p->image_printer_bed->SetBitmap(create_scaled_bitmap(image_path, this, PRINTER_THUMBNAIL_SIZE.GetHeight())); } else { AMSCountPopupWindow::UpdateAMSCount(0, p->single_extruder); - update_extruder_variant(*p->single_extruder, 0); + for (size_t row = 0; row < p->single_extruder->NozzleRowCount(); ++row) + update_extruder_variant(*p->single_extruder, row, int(row)); //if (!p->is_switching_diameter) update_extruder_diameter(0, *p->single_extruder); + // The card reads the nozzles out, the variant box above is what switches the machine. + p->single_extruder->SetRowDiameters(nozzle_diameter->values); + if (multi_extruder_rows) { + // The hidden left/right cards keep mirroring the first extruders' diameters: the + // device sync path (a connected Bambu printer or a printer agent) still reads them. + update_extruder_diameter(0, *p->left_extruder); + update_extruder_diameter(1, *p->right_extruder); + } // ORCA sync unified nozzle combo box p->combo_nozzle_dia->Clear(); for (size_t i = 0; i < diameters.size(); ++i) p->combo_nozzle_dia->Append(diameters[i], {}); - p->combo_nozzle_dia->SetSelection((*p->single_extruder).combo_diameter->GetSelection()); + // Prefer the variant the preset names: a mixed-nozzle machine reads "0.4+0.6", which is + // no single extruder's diameter. + const int variant = p->combo_nozzle_dia->FindString(diameter); + p->combo_nozzle_dia->SetSelection(variant != wxNOT_FOUND ? variant : (*p->single_extruder).combo_diameter->GetSelection()); // ORCA update nozzle type const auto& full_config = wxGetApp().preset_bundle->full_config(); @@ -6749,6 +6969,14 @@ struct Plater::priv // GUI elements AuiMgr m_aui_mgr; + // Live dock panes. `on_close` runs when the user closes one from its close button; `shown` is + // what the owner asked for. + struct DockPane + { + std::function on_close; + bool shown{true}; + }; + std::map m_dock_panes; wxString m_default_window_layout; wxPanel* current_panel{ nullptr }; std::vector panels; @@ -6928,6 +7156,11 @@ struct Plater::priv void update_sidebar(bool force_update = false); void reset_window_layout(); Sidebar::DockingState get_sidebar_docking_state(); + void add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock, + const wxSize& size, std::function on_close); + void remove_dock_pane(wxWindow* window); + void show_dock_pane(wxWindow* window, bool show); + bool dock_pane_visible(const DockPane& dock_pane, const wxAuiPaneInfo& pane) const; bool is_view3D_layers_editing_enabled() const { return (current_panel == view3D) && view3D->get_canvas3d()->is_layers_editing_enabled(); } @@ -7026,7 +7259,7 @@ struct Plater::priv void remove(size_t obj_idx); bool delete_object_from_model(size_t obj_idx, bool refresh_immediately = true); //BBS void delete_all_objects_from_model(); - void reset(bool apply_presets_change = false); + void reset(bool apply_presets_change = false, bool reload_presets = true); void center_selection(); void drop_selection(); void mirror(Axis axis); @@ -7530,6 +7763,18 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame) panel_3d->SetSizer(panel_sizer); m_aui_mgr.AddPane(panel_3d, wxAuiPaneInfo().Name("main").CenterPane().PaneBorder(false)); + q->Bind(wxEVT_AUI_PANE_CLOSE, [this](wxAuiManagerEvent& evt) { + const wxAuiPaneInfo* pane = evt.GetPane(); + auto it = pane != nullptr ? m_dock_panes.find(pane->window) : m_dock_panes.end(); + if (it != m_dock_panes.end()) { + const std::function on_close = std::move(it->second.on_close); + m_dock_panes.erase(it); + if (on_close) + on_close(); + } + evt.Skip(); + }); + m_default_window_layout = m_aui_mgr.SavePerspective(); { @@ -7901,7 +8146,8 @@ Plater::priv::priv(Plater *q, MainFrame *main_frame) if (this->q->get_project_filename().IsEmpty() && this->q->is_empty_project()) { int skip_confirm = e.GetInt(); - this->q->new_project(skip_confirm, true); + // Skips the preset reload; trigger_restore_project()'s callers load the presets first. + this->q->new_project(skip_confirm, true, wxString(), false); } }); //wxPostEvent(this->q, wxCommandEvent{EVT_RESTORE_PROJECT}); @@ -8202,6 +8448,14 @@ void Plater::priv::update_sidebar(bool force_update) { } } + for (const auto& [window, dock_pane] : m_dock_panes) { + wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window); + if (pane.IsOk() && pane.IsShown() != dock_pane_visible(dock_pane, pane)) { + pane.Show(!pane.IsShown()); + needs_update = true; + } + } + if (needs_update) { notification_manager->set_sidebar_collapsed(sidebar.IsShown()); m_aui_mgr.Update(); @@ -8211,10 +8465,96 @@ void Plater::priv::update_sidebar(bool force_update) { void Plater::priv::reset_window_layout() { m_aui_mgr.LoadPerspective(m_default_window_layout, false); + // Loading a layout docks and hides every pane it does not list, and the default layout lists no + // dock panes: a floating dock pane is docked again, like the rest of the window. + for (const auto& [window, dock_pane] : m_dock_panes) + if (wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window); pane.IsOk()) + pane.Show(dock_pane_visible(dock_pane, pane)); sidebar_layout.is_collapsed = false; update_sidebar(true); } +bool Plater::priv::dock_pane_visible(const DockPane& dock_pane, const wxAuiPaneInfo& pane) const +{ + // A floating pane is a top-level window, so it does not hide with the Plater on other tabs. + return dock_pane.shown && (!pane.IsFloating() || sidebar_layout.show); +} + +void Plater::priv::add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock, + const wxSize& size, std::function on_close) +{ + const wxString base_name = wxString::FromUTF8(name); + wxString unique_name = base_name; + for (int i = 2; m_aui_mgr.GetPane(unique_name).IsOk(); ++i) + unique_name = base_name + wxString::Format("#%d", i); + + // A restored layout below already holds pixels. + const wxSize pixels = q->FromDIP(size); + wxAuiPaneInfo info; + info.Name(unique_name).Caption(caption).BestSize(pixels).FloatingSize(pixels).DestroyOnClose(true); + if (dock == "left") + info.Left(); + else if (dock == "bottom") + info.Bottom(); + else + info.Right(); + if (dock == "float") + info.Float(); + + // Put the pane back where it was the last time the window layout was saved with it open. + const std::string saved = aui_pane_layout_entry(wxGetApp().app_config->get("window_layout"), unique_name.utf8_string()); + if (!saved.empty()) { + m_aui_mgr.LoadPaneInfo(wxString::FromUTF8(saved), info); + info.Caption(caption).DestroyOnClose(true).Show(); + } + + // Floating is disabled on Wayland. + if ((m_aui_mgr.GetFlags() & wxAUI_MGR_ALLOW_FLOATING) == 0) { + info.Dock().Floatable(false); + if (info.dock_direction == wxAUI_DOCK_NONE) + info.Right(); + } + + const DockPane& dock_pane = m_dock_panes[window] = DockPane{std::move(on_close)}; + info.Show(dock_pane_visible(dock_pane, info)); + m_aui_mgr.AddPane(window, info); + + // wxAUI does not record a dragged sash in best_size, so track the docked size like the sidebar + // does, for the saved layout. + window->Bind(wxEVT_IDLE, [this, window](wxIdleEvent& evt) { + wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window); + if (pane.IsOk() && pane.IsShown() && pane.IsDocked() && pane.rect.GetWidth() > 0 && pane.rect.GetHeight() > 0) { + const bool horizontal = pane.dock_direction == wxAUI_DOCK_TOP || pane.dock_direction == wxAUI_DOCK_BOTTOM; + pane.BestSize(horizontal ? pane.best_size.GetWidth() : pane.rect.GetWidth(), + horizontal ? pane.rect.GetHeight() : pane.best_size.GetHeight()); + } + evt.Skip(); + }); + + m_aui_mgr.Update(); +} + +void Plater::priv::remove_dock_pane(wxWindow* window) +{ + m_dock_panes.erase(window); + if (m_aui_mgr.DetachPane(window)) + m_aui_mgr.Update(); + window->Destroy(); +} + +void Plater::priv::show_dock_pane(wxWindow* window, bool show) +{ + const auto it = m_dock_panes.find(window); + wxAuiPaneInfo& pane = m_aui_mgr.GetPane(window); + if (it == m_dock_panes.end() || !pane.IsOk()) + return; + it->second.shown = show; + if (pane.IsShown() == dock_pane_visible(it->second, pane)) + return; + pane.Show(!pane.IsShown()); + m_aui_mgr.Update(); +} + Sidebar::DockingState Plater::priv::get_sidebar_docking_state() { if (!sidebar_layout.is_enabled) { return Sidebar::None; @@ -10181,7 +10521,14 @@ void Plater::priv::remove(size_t obj_idx) view3D->enable_layers_editing(false); m_worker.cancel_all(); + std::string obj_name = (obj_idx < model.objects.size()) ? model.objects[obj_idx]->name : std::to_string(obj_idx); model.delete_object(obj_idx); + { + Slic3r::LifecycleEventContext ctx; + ctx.name = obj_name; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectDeleted, ctx); + } //BBS: notify partplate the instance removed partplate_list.notify_instance_removed(obj_idx, -1); update(); @@ -10214,7 +10561,14 @@ bool Plater::priv::delete_object_from_model(size_t obj_idx, bool refresh_immedia if (obj->is_cut()) sidebar->obj_list()->invalidate_cut_info_for_object(obj_idx); + std::string obj_name = obj->name; model.delete_object(obj_idx); + { + Slic3r::LifecycleEventContext ctx; + ctx.name = obj_name; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ObjectDeleted, ctx); + } //BBS: notify partplate the instance removed partplate_list.notify_instance_removed(obj_idx, -1); @@ -10258,12 +10612,24 @@ void Plater::priv::delete_all_objects_from_model() model.plates_custom_gcodes.clear(); } -void Plater::priv::reset(bool apply_presets_change) +void Plater::priv::reset(bool apply_presets_change, bool reload_presets) { + // TakeSnapshot below and load_current_presets() further down each re-evaluate the + // aggregate dirty flag against a baseline that hasn't been reset yet, so they can toggle + // is_dirty() back and forth several times before it settles; coalesce those into one event. + ProjectDirtyStateManager::NotificationSuppressor dirty_notify_suppressor(dirty_state); + Plater::TakeSnapshot snapshot(q, _u8L("Reset Project"), UndoRedo::SnapshotType::ProjectSeparator); clear_warnings(); + const std::string closed_project_name = into_u8(get_project_filename()); + if (!closed_project_name.empty() || !model.objects.empty()) { + Slic3r::LifecycleEventContext ctx; + ctx.name = closed_project_name; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ProjectClosed, ctx); + } // A new project must not inherit the previous project's published selection (Feature A/B). m_has_pending_published = false; m_pending_published_keys.clear(); @@ -10301,8 +10667,8 @@ void Plater::priv::reset(bool apply_presets_change) // Same reason, one level up: the Design tab keeps the editable document, not the Model, so // clearing the recipe alone leaves the tab showing the previous project's feature tree — // and its next edit syncs that tree straight back into the new project. - if (wxGetApp().mainframe != nullptr && wxGetApp().mainframe->m_design_panel != nullptr) - wxGetApp().mainframe->m_design_panel->clear_document(); + if (DesignPanel* design = DesignPanel::if_built()) + design->clear_document(); #endif assemble_view->get_canvas3d()->reset_explosion_ratio(); update(); @@ -10321,7 +10687,7 @@ void Plater::priv::reset(bool apply_presets_change) wxGetApp().preset_bundle->reset_project_embedded_presets(); if (apply_presets_change) wxGetApp().apply_keeped_preset_modifications(); - else + else if (reload_presets) wxGetApp().load_current_presets(false, false); //BBS @@ -12694,8 +13060,10 @@ void Plater::priv::on_process_completed(SlicingProcessCompletedEvent &evt) this->background_process.reset_export(); // This bool stops showing export finished notification even when process_completed_with_error is false bool has_error = false; + std::string lifecycle_error_msg; if (evt.error()) { auto message = evt.format_error_message(); + lifecycle_error_msg = message.first; if (evt.critical_error()) { if (q->m_tracking_popup_menu) { // We don't want to pop-up a message box when tracking a pop-up menu. @@ -12733,6 +13101,24 @@ void Plater::priv::on_process_completed(SlicingProcessCompletedEvent &evt) is_finished = true; } + { + Slic3r::LifecycleEventContext ctx; + if (const PrintBase* print = this->background_process.current_print()) { + const Model& model = print->model(); + ctx.id = std::to_string(model.id().id); + if (model.model_info) + ctx.name = model.model_info->model_name; + } else { + // Realistically Printbase* print will never be null because select_technology already asserts an active print + // and the worker thread asserts it before processing. + BOOST_LOG_TRIVIAL(warning) << __FUNCTION__ << ": slicing completed without an active print; lifecycle event has no model ID"; + } + ctx.code = evt.cancelled() ? Slic3r::LifecycleEvtCode::Warn : + (has_error ? Slic3r::LifecycleEvtCode::Error : Slic3r::LifecycleEvtCode::Ok); + ctx.msg = evt.cancelled() ? "cancelled" : (has_error ? lifecycle_error_msg : std::string()); + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::SlicingJobComplete, ctx); + } + //BBS: set the current plater's slice result to valid if (!this->background_process.empty()) this->background_process.get_current_plate()->update_slice_result_valid_state(evt.success()); @@ -13061,17 +13447,17 @@ void Plater::priv::on_tab_selection_changing(wxBookCtrlEvent& e) // Pointer test, not a name lookup: in printer-agents mode this page is TAB_ID_MONITOR_WEB // while the native Device tab holds TAB_ID_MONITOR, and in legacy-web mode it holds // TAB_ID_MONITOR itself. - const bool selecting_web_device_tab = main_frame->m_printer_view && - main_frame->m_tabpanel->GetPage(new_sel) == main_frame->m_printer_view; + const bool selecting_web_device_tab = main_frame->m_printer_view_page && + main_frame->m_tabpanel->GetPage(new_sel) == main_frame->m_printer_view_page; if (selecting_web_device_tab) { // Use the selected discovered machine when the preset has no host. main_frame->load_printer_url(); } else if (new_name == TAB_ID_MONITOR && wxGetApp().preset_bundle != nullptr) { auto cfg = wxGetApp().preset_bundle->printers.get_edited_preset().config; wxString url = from_u8(PrintHost::get_print_host_webui(&cfg)); - if (main_frame->m_printer_view && url.empty()) { + if (PrinterWebView* view = PrinterWebView::if_built(); view != nullptr && url.empty()) { // It's missing_connection page, reload so that we can replay the gif image - main_frame->m_printer_view->reload(); + view->reload(); } } } @@ -13802,8 +14188,8 @@ void Plater::priv::unbind_canvas_event_handlers() // The Design tab's viewport is a fourth GLCanvas3D on the same shared GL context, owned by // MainFrame rather than by us — same reach as reset() uses for clear_document(). Null until // the tab has been opened once, so most sessions skip it. - if (wxGetApp().mainframe != nullptr && wxGetApp().mainframe->m_design_panel != nullptr) - wxGetApp().mainframe->m_design_panel->unbind_canvas_event_handlers(); + if (DesignPanel* design = DesignPanel::if_built()) + design->unbind_canvas_event_handlers(); #endif } @@ -13816,8 +14202,8 @@ void Plater::priv::reset_canvas_volumes() preview->get_canvas3d()->reset_volumes(); #ifdef SLIC3R_CAD - if (wxGetApp().mainframe != nullptr && wxGetApp().mainframe->m_design_panel != nullptr) - wxGetApp().mainframe->m_design_panel->reset_canvas_volumes(); + if (DesignPanel* design = DesignPanel::if_built()) + design->reset_canvas_volumes(); #endif } @@ -15248,7 +15634,7 @@ Print& Plater::fff_print() { return p->fff_print; } const SLAPrint& Plater::sla_print() const { return p->sla_print; } SLAPrint& Plater::sla_print() { return p->sla_print; } -int Plater::new_project(bool skip_confirm, bool silent, const wxString& project_name) +int Plater::new_project(bool skip_confirm, bool silent, const wxString& project_name, bool reload_presets) { model().calib_pa_pattern.reset(nullptr); model().plates_custom_gcodes.clear(); @@ -15285,21 +15671,33 @@ int Plater::new_project(bool skip_confirm, bool silent, const wxString& project_ //get_partplate_list().reinit(); //get_partplate_list().update_slice_context_to_current_plate(p->background_process); //p->preview->update_gcode_result(p->partplate_list.get_current_slice_result()); - reset(transfer_preset_changes); - reset_project_dirty_after_save(); - reset_project_dirty_initial_presets(); - wxGetApp().update_saved_preset_from_current_preset(); - update_project_dirty_from_presets(); + if (!silent) { + Slic3r::LifecycleEventContext ctx; + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::NewProject, ctx); + } + { + // Same rationale as in Plater::priv::reset(): the whole reset + preset-reload + + // baseline-reset sequence below settles into its final dirty state only once it + // completes, so hold notifications until then to avoid firing on transient flips. + ProjectDirtyStateManager::NotificationSuppressor dirty_notify_suppressor(p->dirty_state); - //reset project - p->project.reset(); - //set project name - if (project_name.empty()) - p->set_project_name(_L("Untitled")); - else - p->set_project_name(project_name); + reset(transfer_preset_changes, reload_presets); + reset_project_dirty_after_save(); + reset_project_dirty_initial_presets(); + wxGetApp().update_saved_preset_from_current_preset(); + update_project_dirty_from_presets(); - Plater::TakeSnapshot snapshot(this, "New Project", UndoRedo::SnapshotType::ProjectSeparator); + //reset project + p->project.reset(); + //set project name + if (project_name.empty()) + p->set_project_name(_L("Untitled")); + else + p->set_project_name(project_name); + + Plater::TakeSnapshot snapshot(this, "New Project", UndoRedo::SnapshotType::ProjectSeparator); + } Model m; model().load_from(m); // new id avoid same path name @@ -15417,6 +15815,13 @@ void Plater::load_project(wxString const& filename2, p->set_project_name(_L("Untitled")); } + { + Slic3r::LifecycleEventContext ctx; + ctx.name = into_u8(load_restore ? originfile : filename); + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ProjectOpened, ctx); + } + } else { if (using_exported_file()) { BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << __LINE__ << " using ecported set project filename: " << filename; @@ -15488,11 +15893,23 @@ int Plater::save_project(bool saveAs) if (full_pathnames) { save_strategy = save_strategy | SaveStrategy::FullPathSources; } + { + Slic3r::LifecycleEventContext ctx; + ctx.name = into_u8(filename); + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ProjectBeforeSave, ctx); + } if (export_3mf(into_path(filename), save_strategy) < 0) { MessageDialog(this, _L("Failed to save the project.\nPlease check whether the folder exists online or if other programs have the project file open."), _L("Save project"), wxOK | wxICON_WARNING).ShowModal(); return wxID_CANCEL; } + { + Slic3r::LifecycleEventContext ctx; + ctx.name = into_u8(filename); + ctx.code = Slic3r::LifecycleEvtCode::Ok; + Slic3r::fire_lifecycle_event(Slic3r::LifecycleEvent::ProjectAfterSave, ctx); + } Slic3r::remove_backup(model(), false); @@ -15548,6 +15965,11 @@ void Plater::import_model_id(wxString download_info) //wxString sError = error.what(); } + // The name comes from the link: reduce it to a plain file name inside the download folder. + filename = from_u8(sanitize_file_basename(into_u8(filename))); + if (filename.empty()) + filename = "untitled.3mf"; + bool download_ok = false; int retry_count = 0; const int max_retries = 3; @@ -15589,51 +16011,28 @@ void Plater::import_model_id(wxString download_info) msg = _L("Preparing 3MF file..."); - //gets the number of files with the same name - std::vector vecFiles; - bool is_already_exist = false; - - target_path = fs::path(wxGetApp().app_config->get("download_path")); - try - { - vecFiles.clear(); - wxString extension = fs::path(filename.wx_str()).extension().c_str(); - - - //check file suffix - if (!extension.Contains(".3mf")) { - msg = _L("Download failed; unknown file format."); - return; - } - - auto name = filename.substr(0, filename.length() - extension.length() - 1); - - for (const auto& iter : boost::filesystem::directory_iterator(target_path)) - { - if (boost::filesystem::is_directory(iter.path())) - continue; - - wxString sFile = iter.path().filename().string().c_str(); - if (strstr(sFile.c_str(), name.c_str()) != NULL) { - vecFiles.push_back(sFile); - } - - if (sFile == filename) is_already_exist = true; - } - } - catch (const std::exception&) - { - //wxString sError = error.what(); + //check file suffix + wxString extension = fs::path(filename.wx_str()).extension().c_str(); + if (!extension.Contains(".3mf")) { + msg = _L("Download failed; unknown file format."); + return; } - //update filename - if (is_already_exist && vecFiles.size() >= 1) { - wxString extension = fs::path(filename.wx_str()).extension().c_str(); - wxString name = filename.substr(0, filename.length() - extension.length()); - filename = wxString::Format("%s(%d)%s", name, vecFiles.size() + 1, extension).ToStdString(); + //never replace an existing file + std::string unused_filename; + try { + if (!find_unused_filename(target_path, into_u8(filename), {}, unused_filename)) + unused_filename.clear(); + } catch (const std::exception&) { + unused_filename.clear(); } + if (unused_filename.empty()) { + msg = _L("Importing to Orca Slicer failed. Please download the file and manually import it."); + return; + } + filename = from_u8(unused_filename); msg = _L("Downloading project..."); @@ -15645,10 +16044,6 @@ void Plater::import_model_id(wxString download_info) boost::uuids::uuid uuid = boost::uuids::random_generator()(); std::string unique = to_string(uuid).substr(0, 6); - if (filename.empty()) { - filename = "untitled.3mf"; - } - //target_path /= (boost::format("%1%_%2%.3mf") % filename % unique).str(); target_path /= fs::path(filename.wc_str()); @@ -15697,13 +16092,26 @@ void Plater::import_model_id(wxString download_info) cont = false; } }) - .on_complete([&cont, &download_ok, tmp_path, target_path](std::string body, unsigned /* http_status */) { + .on_complete([&cont, &download_ok, &msg, tmp_path, &target_path](std::string body, unsigned /* http_status */) { fs::fstream file(tmp_path, std::ios::out | std::ios::binary | std::ios::trunc); file.write(body.c_str(), body.size()); file.close(); - fs::rename(tmp_path, target_path); cont = false; - download_ok = true; + try { + // Another file may have taken the name while downloading. + std::string unused_filename; + if (find_unused_filename(target_path.parent_path(), target_path.filename().string(), {}, unused_filename)) { + target_path = target_path.parent_path() / unused_filename; + fs::rename(tmp_path, target_path); + download_ok = true; + return; + } + } catch (const std::exception &e) { + BOOST_LOG_TRIVIAL(error) << "import_model_id: failed to move the download into place: " << e.what(); + } + boost::system::error_code ec; + fs::remove(tmp_path, ec); + msg = _L("Importing to Orca Slicer failed. Please download the file and manually import it."); }).perform_sync(); // for break while @@ -16275,7 +16683,9 @@ void adjust_settings_for_flowrate_calib(ModelObjectPtrs& objects, bool linear, i _obj->config.set_key_value("internal_solid_infill_line_width", new ConfigOptionFloatOrPercent(nozzle_diameter * 1.2f, false)); // ORCA: use the pattern parameter _obj->config.set_key_value("top_surface_pattern", new ConfigOptionEnum(pattern)); - _obj->config.set_key_value("top_solid_infill_flow_ratio", new ConfigOptionFloat(1.0f)); + const auto *top_solid_flow = dynamic_cast(_obj->config.option("top_solid_infill_flow_ratio")); + _obj->config.set_key_value("top_solid_infill_flow_ratio", + new ConfigOptionFloatsNullable(top_solid_flow ? top_solid_flow->size() : 1, 1.0f)); _obj->config.set_key_value("infill_direction", new ConfigOptionFloat(45)); _obj->config.set_key_value("solid_infill_direction", new ConfigOptionFloat(135)); _obj->config.set_key_value("center_of_surface_pattern", new ConfigOptionEnum(CenterOfSurfacePattern::Each_Surface)); @@ -17828,6 +18238,19 @@ Sidebar::DockingState Plater::get_sidebar_docking_state() const { return p->get_ void Plater::reset_window_layout() { p->reset_window_layout(); } +void Plater::add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock, + const wxSize& size, std::function on_close) +{ + p->add_dock_pane(window, name, caption, dock, size, std::move(on_close)); +} +void Plater::remove_dock_pane(wxWindow* window) { p->remove_dock_pane(window); } +void Plater::remove_dock_panes() +{ + while (!p->m_dock_panes.empty()) + p->remove_dock_pane(p->m_dock_panes.begin()->first); +} +void Plater::show_dock_pane(wxWindow* window, bool show) { p->show_dock_pane(window, show); } + //BBS void Plater::select_curr_plate_all() { p->select_curr_plate_all(); } void Plater::remove_curr_plate_all() { p->remove_curr_plate_all(); } @@ -17837,7 +18260,7 @@ void Plater::deselect_all() { p->deselect_all(); } void Plater::exit_gizmo() { p->exit_gizmo(); } void Plater::remove(size_t obj_idx) { p->remove(obj_idx); } -void Plater::reset(bool apply_presets_change) { p->reset(apply_presets_change); } +void Plater::reset(bool apply_presets_change, bool reload_presets) { p->reset(apply_presets_change, reload_presets); } void Plater::reset_with_confirm() { if (p->model.objects.empty() || MessageDialog(static_cast(this), _L("All objects will be removed, continue?"), @@ -19854,7 +20277,7 @@ int Plater::export_config_3mf(int plate_idx, Export3mfProgressFn proFn) void Plater::send_calibration_job_finished(wxCommandEvent & evt) { p->main_frame->request_select_tab(TAB_ID_CALIBRATION); - auto calibration_panel = p->main_frame->m_calibration; + CalibrationPanel* calibration_panel = CalibrationPanel::ensure(); if (calibration_panel) { auto curr_wizard = static_cast(calibration_panel->get_tabpanel()->GetPage(evt.GetInt())); wxCommandEvent event(EVT_CALIBRATION_JOB_FINISHED); @@ -19886,8 +20309,8 @@ void Plater::print_job_finished(wxCommandEvent &evt) dev->set_selected_machine(evt.GetString().ToStdString()); p->main_frame->request_select_tab(TAB_ID_MONITOR); - //jump to monitor and select device status panel - MonitorPanel* curr_monitor = p->main_frame->m_monitor; + // Selects the status page on a built Device tab; one built by the switch starts there. + MonitorPanel* curr_monitor = MonitorPanel::if_built(); if(curr_monitor) curr_monitor->get_tabpanel()->ChangeSelection(MonitorPanel::PrinterTab::PT_STATUS); } @@ -20627,8 +21050,8 @@ void Plater::update_print_error_info(int code, std::string msg, std::string extr if (p->m_send_to_sdcard_dlg) { p->m_send_to_sdcard_dlg->update_print_error_info(code, msg, extra); } - if (p->main_frame->m_calibration) - p->main_frame->m_calibration->update_print_error_info(code, msg, extra); + if (CalibrationPanel* calibration = CalibrationPanel::if_built()) + calibration->update_print_error_info(code, msg, extra); } wxString Plater::get_project_filename(const wxString& extension) const @@ -20839,6 +21262,14 @@ void Plater::changed_object(ModelObject &object){ // Check outside bed get_current_canvas3D()->requires_check_outside_state(); + + if (!is_loading_project()) { + LifecycleEventContext ctx; + ctx.name = object.name; + ctx.id = std::to_string(object.id().id); + ctx.source = "geometry"; + fire_lifecycle_event(LifecycleEvent::ObjectChanged, ctx); + } } void Plater::changed_object(int obj_idx) @@ -20875,6 +21306,20 @@ void Plater::changed_objects(const std::vector& object_idxs) // update print this->p->schedule_background_process(); + + if (!is_loading_project()) { + for (size_t obj_idx : object_idxs) { + if (obj_idx >= p->model.objects.size() || p->model.objects[obj_idx] == nullptr) + continue; + + LifecycleEventContext ctx; + ctx.name = p->model.objects[obj_idx]->name; + ctx.id = std::to_string(p->model.objects[obj_idx]->id().id); + ctx.index = static_cast(obj_idx); + ctx.source = "geometry"; + fire_lifecycle_event(LifecycleEvent::ObjectChanged, ctx); + } + } } void Plater::schedule_background_process(bool schedule/* = true*/) @@ -20926,7 +21371,8 @@ void Plater::pop_warning_and_go_to_device_page(wxString printer_name, PrinterWar { printer_name.Replace("Bambu Lab", "", false); wxString content; - bool device_page = (wxGetApp().mainframe == nullptr) && (wxGetApp().mainframe->m_monitor->IsShown()); + MainFrame* frame = wxGetApp().mainframe; + bool device_page = frame != nullptr && frame->m_monitor_page->in_book(); if (type == PrinterWarningType::NOT_CONNECTED) { if (device_page) { content = wxString::Format(_L("Printer not connected. Please go to the device page to connect %s before syncing."), diff --git a/src/slic3r/GUI/Plater.hpp b/src/slic3r/GUI/Plater.hpp index de88f0ce34..ebff1ff90d 100644 --- a/src/slic3r/GUI/Plater.hpp +++ b/src/slic3r/GUI/Plater.hpp @@ -339,7 +339,7 @@ public: // Helper: returns config indices where filament_is_mixed == false std::vector physical_filament_config_indices() const; - int new_project(bool skip_confirm = false, bool silent = false, const wxString& project_name = wxString()); + int new_project(bool skip_confirm = false, bool silent = false, const wxString& project_name = wxString(), bool reload_presets = true); // BBS: save & backup void load_project(wxString const & filename = "", wxString const & originfile = "-"); int save_project(bool saveAs = false); @@ -476,6 +476,17 @@ public: void reset_window_layout(); + // Dock panes sit alongside the sidebar; `window` must be a child of the Plater. `dock` is + // "left", "right", "bottom" or "float", and `size` is in DIPs. A pane closed from its own close + // button is destroyed after on_close runs; remove_dock_pane() destroys it without calling on_close. + void add_dock_pane(wxWindow* window, const std::string& name, const wxString& caption, const std::string& dock, + const wxSize& size, std::function on_close); + void remove_dock_pane(wxWindow* window); + void show_dock_pane(wxWindow* window, bool show); + // Removes every dock pane without calling on_close, for MainFrame::shutdown() (app exit and a + // language switch), while the Plater and any floating frames still exist. + void remove_dock_panes(); + // Called after the Preferences dialog is closed and the program settings are saved. // Update the UI based on the current preferences. void update_ui_from_settings(); @@ -488,7 +499,7 @@ public: void deselect_all(); void exit_gizmo(); void remove(size_t obj_idx); - void reset(bool apply_presets_change = false); + void reset(bool apply_presets_change = false, bool reload_presets = true); void reset_with_confirm(); //BBS: return int for various result int close_with_confirm(std::function second_check = nullptr); // BBS close project diff --git a/src/slic3r/GUI/PrebuildQueue.hpp b/src/slic3r/GUI/PrebuildQueue.hpp new file mode 100644 index 0000000000..c013f53865 --- /dev/null +++ b/src/slic3r/GUI/PrebuildQueue.hpp @@ -0,0 +1,89 @@ +#pragma once + +#include +#include +#include +#include + +#include "Lazy.hpp" + +namespace Slic3r { namespace GUI { + +// Holders to build at idle, ordered by prebuild_order(), run one slice at a time. The +// holders outlive the queue. Main thread only. +class PrebuildQueue +{ +public: + struct Slice + { + std::string name; // the task that ran; empty when nothing was pending + int units{ 0 }; // units run + long long ms{ 0 }; // time spent + bool completed{ false }; // the task has no more units + bool remaining{ false }; // some task is still pending + }; + + // Lower order runs first, equal order in the order added. + void add(LazyBase& task) + { + auto after = std::find_if(m_tasks.begin(), m_tasks.end(), [&](const LazyBase* t) { return t->prebuild_order() > task.prebuild_order(); }); + m_tasks.insert(after, &task); + } + + void clear() { m_tasks.clear(); } + + bool pending() const + { + return std::any_of(m_tasks.begin(), m_tasks.end(), [](const LazyBase* t) { return t->pending(); }); + } + + // The task names in queue order, comma separated. + std::string names() const + { + std::string out; + for (const LazyBase* t : m_tasks) + out += (out.empty() ? "" : ", ") + t->name(); + return out; + } + + // Runs units of the first pending task until it completes, budget_ms of now_ms() have + // passed, or interrupt() is true after a unit; on_unit gets the task name and each + // unit's duration. A task with no work is passed over and stays in the queue, so one + // whose work returns is pending again. + Slice run_slice(int budget_ms, + const std::function& now_ms, + const std::function& interrupt, + const std::function& on_unit = {}) + { + Slice slice; + auto next = std::find_if(m_tasks.begin(), m_tasks.end(), [](const LazyBase* t) { return t->pending(); }); + if (next == m_tasks.end()) + return slice; + // The pointer is copied out, since a unit may add tasks and reallocate m_tasks. + LazyBase* const task = *next; + slice.name = task->name(); + const long long started = now_ms(); + for (;;) { + const long long unit_started = now_ms(); + const bool more = task->build_step(); + const long long now = now_ms(); + ++slice.units; + if (on_unit) + on_unit(slice.name, now - unit_started); + slice.ms = now - started; + if (!more) { + slice.completed = true; + break; + } + if (slice.ms >= budget_ms || interrupt()) + break; + } + slice.remaining = pending(); + return slice; + } + +private: + std::vector m_tasks; +}; + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/Preferences.cpp b/src/slic3r/GUI/Preferences.cpp index be4bfcfa63..055449c35d 100644 --- a/src/slic3r/GUI/Preferences.cpp +++ b/src/slic3r/GUI/Preferences.cpp @@ -1044,8 +1044,8 @@ wxBoxSizer *PreferencesDialog::create_item_checkbox(wxString title, wxString too if (m_bambu_cloud_checkbox) m_bambu_cloud_checkbox->Enable(!enabled); } else if (param == "hide_login_side_panel") { - if (wxGetApp().mainframe && wxGetApp().mainframe->m_webview) { - wxGetApp().mainframe->m_webview->SendCloudProvidersInfo(); + if (WebViewPanel* home = WebViewPanel::if_built()) { + home->SendCloudProvidersInfo(); } } // ORCA: apply the preview dimming change immediately to the currently loaded preview @@ -1254,9 +1254,8 @@ wxBoxSizer *PreferencesDialog::create_item_bambu_cloud(wxString title, wxString app_config->save(); // Update homepage visibility immediately - auto *mainframe = wxGetApp().mainframe; - if (mainframe && mainframe->m_webview) - mainframe->m_webview->SendCloudProvidersInfo(); + if (WebViewPanel* home = WebViewPanel::if_built()) + home->SendCloudProvidersInfo(); }); m_sizer->Add(cb, 0, wxALIGN_CENTER); @@ -1476,7 +1475,7 @@ void PreferencesDialog::create() app_config = get_app_config(); m_parent = new MyscrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); - m_parent->SetScrollRate(5, 5); + m_parent->SetScrollRate(0, FromDIP(20)); m_parent->SetBackgroundColour(*wxWHITE); m_sizer_body = new wxBoxSizer(wxVERTICAL); @@ -1932,6 +1931,15 @@ void PreferencesDialog::create_items() ); g_sizer->Add(item_realistic_phong); + auto item_realistic_preview = create_item_checkbox( + _L("Enable in Preview"), + _L("Also applies realistic view to the Preview canvas, not just Prepare.\n" + "Preview draws the full toolpath geometry, so shadows and SSAO cost considerably" + " more there than on a plain model."), + SETTING_OPENGL_REALISTIC_PREVIEW + ); + g_sizer->Add(item_realistic_preview); + auto item_realistic_ssao = create_item_checkbox( _L("SSAO ambient occlusion"), _L("Applies SSAO in realistic view."), @@ -2019,6 +2027,23 @@ void PreferencesDialog::create_items() //// GRAPHICS > G-code Preview g_sizer->Add(create_item_title(_L("G-code Preview")), 1, wxEXPAND); + // ORCA: view type the preview opens with + std::vector PreviewViewTypeLabels; + std::vector PreviewViewTypeValues; + for (const auto& [value, label] : GCodeViewer::default_view_type_choices()) { + PreviewViewTypeValues.push_back(value); + PreviewViewTypeLabels.push_back(from_u8(label)); + } + auto item_preview_view_type = create_item_combobox( + _L("Default view type"), + _L("The color scheme the sliced preview opens with.\n" + "Automatic: Filament for multi material prints, Line Type for single material ones.\n" + "Last used: the view type you selected last.\n" + "Any other value always opens that view type.\n" + "You can still switch the view type in the preview afterwards."), + "preview_default_view_type", PreviewViewTypeLabels, PreviewViewTypeValues); + g_sizer->Add(item_preview_view_type); + auto item_dim_previous_layers = create_item_checkbox( _L("Dim lower layers"), _L("When scrubbing the layer slider in the sliced preview, render the layers below the current one darkened so that only the layer being viewed is shown at full brightness."), diff --git a/src/slic3r/GUI/PrintOptionsDialog.cpp b/src/slic3r/GUI/PrintOptionsDialog.cpp index 349e75fa06..f03bcb1d29 100644 --- a/src/slic3r/GUI/PrintOptionsDialog.cpp +++ b/src/slic3r/GUI/PrintOptionsDialog.cpp @@ -32,7 +32,7 @@ PrintOptionsDialog::PrintOptionsDialog(wxWindow* parent) m_scrollwindow = new wxScrolledWindow(this, wxID_ANY); - m_scrollwindow->SetScrollRate(0, FromDIP(10)); + m_scrollwindow->SetScrollRate(0, FromDIP(20)); m_scrollwindow->SetBackgroundColour(*wxWHITE); m_scrollwindow->SetMinSize(wxSize(FromDIP(480), wxDefaultCoord)); m_scrollwindow->SetMaxSize(wxSize(FromDIP(480), wxDefaultCoord)); @@ -1793,6 +1793,7 @@ wxString PrinterPartsDialog::GetString(NozzleFlowType nozzle_flow_type) const { case Slic3r::S_FLOW: return _L("Standard"); case Slic3r::H_FLOW: return _L("High flow"); case Slic3r::U_FLOW: return _L("TPU High flow"); + case Slic3r::E_FLOW: return _L("E3D High Flow"); default: break; } diff --git a/src/slic3r/GUI/PrinterWebView.hpp b/src/slic3r/GUI/PrinterWebView.hpp index 8a62ce70a2..1ab1e17932 100644 --- a/src/slic3r/GUI/PrinterWebView.hpp +++ b/src/slic3r/GUI/PrinterWebView.hpp @@ -26,6 +26,7 @@ #include "wx/textctrl.h" #include #include +#include "Lazy.hpp" namespace Slic3r { @@ -34,7 +35,7 @@ namespace GUI { class PrinterWebViewHandler; -class PrinterWebView : public wxPanel { +class PrinterWebView : public wxPanel, public LazyInstance { public: PrinterWebView(wxWindow *parent); virtual ~PrinterWebView(); diff --git a/src/slic3r/GUI/Project.cpp b/src/slic3r/GUI/Project.cpp index 6d1eb0e180..8d87939afc 100644 --- a/src/slic3r/GUI/Project.cpp +++ b/src/slic3r/GUI/Project.cpp @@ -44,6 +44,7 @@ const std::vector license_list = { ProjectPanel::ProjectPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wxSize &size, long style) : wxPanel(parent, id, pos, size, style) { + SetBackgroundColour(*wxWHITE); m_project_home_url = wxString::Format("file://%s/web/model/index.html", from_u8(resources_dir())); wxString strlang = wxGetApp().current_language_code_safe(); if (strlang != "") @@ -67,6 +68,7 @@ ProjectPanel::ProjectPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, m_auxiliary = new AuxiliaryPanel(this); m_auxiliary->Hide(); main_sizer->Add(m_auxiliary, wxSizerFlags().Expand().Proportion(1)); + add_build_steps_of(*m_auxiliary); Bind(EVT_AUXILIARY_DONE, [this](wxCommandEvent& e) { update_model_data();}); SetSizer(main_sizer); diff --git a/src/slic3r/GUI/Project.hpp b/src/slic3r/GUI/Project.hpp index a590212cb7..a22bc44430 100644 --- a/src/slic3r/GUI/Project.hpp +++ b/src/slic3r/GUI/Project.hpp @@ -35,6 +35,7 @@ #include "libslic3r/ProjectTask.hpp" #include "wxExtensions.hpp" #include "Auxiliary.hpp" +#include "Lazy.hpp" #define AUFILE_GREY700 wxColour(107, 107, 107) #define AUFILE_GREY500 wxColour(158, 158, 158) @@ -59,7 +60,7 @@ struct project_file{ std::string size; }; -class ProjectPanel : public wxPanel +class ProjectPanel : public wxPanel, public StagedBuild, public LazyInstance { private: std::atomic m_web_init_completed{false}; @@ -90,7 +91,6 @@ public: void msw_rescale(); void update_model_data(); void clear_model_info(); - void init_auxiliary() { m_auxiliary->init_auxiliary(); } bool Show(bool show); void OnScriptMessage(wxWebViewEvent& evt); diff --git a/src/slic3r/GUI/ProjectDirtyStateManager.cpp b/src/slic3r/GUI/ProjectDirtyStateManager.cpp index c986328f71..53eb3cd353 100644 --- a/src/slic3r/GUI/ProjectDirtyStateManager.cpp +++ b/src/slic3r/GUI/ProjectDirtyStateManager.cpp @@ -6,6 +6,7 @@ #include "MainFrame.hpp" #include "I18N.hpp" #include "Plater.hpp" +#include "libslic3r/LifecycleEvents.hpp" #include @@ -17,13 +18,23 @@ namespace GUI { void ProjectDirtyStateManager::update_from_undo_redo_stack(bool dirty) { + const bool was_dirty = is_dirty(); m_plater_dirty = dirty; + notify_dirty_change(was_dirty, "undo_redo"); if (const Plater *plater = wxGetApp().plater(); plater && wxGetApp().initialized()) wxGetApp().mainframe->update_title(); } +void ProjectDirtyStateManager::set_plater_dirty(bool is_dirty) +{ + const bool was_dirty = this->is_dirty(); + m_plater_dirty = is_dirty; + notify_dirty_change(was_dirty, "plater"); +} + void ProjectDirtyStateManager::update_from_presets() { + const bool was_dirty = is_dirty(); m_presets_dirty = false; // check switching of the presets only for exist/loaded project, but not for new GUI_App &app = wxGetApp(); @@ -45,18 +56,53 @@ void ProjectDirtyStateManager::update_from_presets() } m_presets_dirty |= app.has_unsaved_preset_changes(); m_project_config_dirty = m_initial_project_config != app.preset_bundle->project_config; + notify_dirty_change(was_dirty, "presets"); app.mainframe->update_title(); } void ProjectDirtyStateManager::reset_after_save() { + const bool was_dirty = is_dirty(); this->reset_initial_presets(); m_plater_dirty = false; m_presets_dirty = false; m_project_config_dirty = false; + notify_dirty_change(was_dirty, "save"); wxGetApp().mainframe->update_title(); } +void ProjectDirtyStateManager::notify_dirty_change(bool was_dirty, const char *source) +{ + if (m_suppress_depth > 0) + return; + + const bool dirty = is_dirty(); + if (was_dirty == dirty) + return; + + LifecycleEventContext ctx; + ctx.code = LifecycleEvtCode::Ok; + ctx.dirty = dirty; + ctx.source = source; + fire_lifecycle_event(LifecycleEvent::ProjectDirtyChanged, ctx); +} + +void ProjectDirtyStateManager::begin_suppress_notifications() +{ + if (m_suppress_depth == 0) + m_suppress_entry_dirty = is_dirty(); + ++m_suppress_depth; +} + +void ProjectDirtyStateManager::end_suppress_notifications() +{ + assert(m_suppress_depth > 0); + if (m_suppress_depth > 0) + --m_suppress_depth; + if (m_suppress_depth == 0) + notify_dirty_change(m_suppress_entry_dirty, "batch"); +} + void ProjectDirtyStateManager::reset_initial_presets() { m_initial_presets.fill(std::string{}); @@ -168,4 +214,3 @@ void ProjectDirtyStateManager::render_debug_window() const } // namespace GUI } // namespace Slic3r - diff --git a/src/slic3r/GUI/ProjectDirtyStateManager.hpp b/src/slic3r/GUI/ProjectDirtyStateManager.hpp index 171d19e219..fd121d1d85 100644 --- a/src/slic3r/GUI/ProjectDirtyStateManager.hpp +++ b/src/slic3r/GUI/ProjectDirtyStateManager.hpp @@ -14,21 +14,42 @@ public: void reset_after_save(); void reset_initial_presets(); - void set_plater_dirty(bool is_dirty) { m_plater_dirty = is_dirty; } + void set_plater_dirty(bool is_dirty); bool is_dirty() const { return m_plater_dirty || m_project_config_dirty || m_presets_dirty; } bool is_presets_dirty() const { return m_presets_dirty; } + // RAII guard coalescing dirty-state updates: while any guard is alive, ProjectDirtyChanged + // notifications are held back; when the outermost guard is destroyed, at most one + // notification fires, reflecting only the net change across the whole guarded scope. + class NotificationSuppressor + { + public: + explicit NotificationSuppressor(ProjectDirtyStateManager &owner) : m_owner(owner) { m_owner.begin_suppress_notifications(); } + ~NotificationSuppressor() { m_owner.end_suppress_notifications(); } + NotificationSuppressor(const NotificationSuppressor &) = delete; + NotificationSuppressor &operator=(const NotificationSuppressor &) = delete; + private: + ProjectDirtyStateManager &m_owner; + }; + #if ENABLE_PROJECT_DIRTY_STATE_DEBUG_WINDOW void render_debug_window() const; #endif // ENABLE_PROJECT_DIRTY_STATE_DEBUG_WINDOW private: + void notify_dirty_change(bool was_dirty, const char *source); + void begin_suppress_notifications(); + void end_suppress_notifications(); + // Does the Undo / Redo stack indicate the project is dirty? bool m_plater_dirty { false }; // Do the presets indicate the project is dirty? bool m_presets_dirty { false }; // Is the project config dirty? bool m_project_config_dirty { false }; + // NotificationSuppressor nesting depth and the dirty state observed when the outermost guard began. + int m_suppress_depth { 0 }; + bool m_suppress_entry_dirty { false }; // Keeps track of preset names selected at the time of last project save. std::array m_initial_presets; DynamicPrintConfig m_initial_project_config; diff --git a/src/slic3r/GUI/PublishSettingsDialog.cpp b/src/slic3r/GUI/PublishSettingsDialog.cpp index bd5c045053..d231857f2c 100644 --- a/src/slic3r/GUI/PublishSettingsDialog.cpp +++ b/src/slic3r/GUI/PublishSettingsDialog.cpp @@ -1225,7 +1225,7 @@ size_t PublishSettingsDialog::category_index_for( } category.scroll = new wxScrolledWindow(category.page, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); - category.scroll->SetScrollRate(0, 10); + category.scroll->SetScrollRate(0, FromDIP(20)); category.scroll->SetBackgroundColour(GetBackgroundColour()); category.list_sizer = new wxBoxSizer(wxVERTICAL); category.scroll->SetSizer(category.list_sizer); diff --git a/src/slic3r/GUI/ReleaseNote.cpp b/src/slic3r/GUI/ReleaseNote.cpp index 029310faf9..c8338dc79a 100644 --- a/src/slic3r/GUI/ReleaseNote.cpp +++ b/src/slic3r/GUI/ReleaseNote.cpp @@ -76,7 +76,7 @@ ReleaseNoteDialog::ReleaseNoteDialog(Plater *plater /*= nullptr*/) m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15)); m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)), wxVSCROLL); - m_vebview_release_note->SetScrollRate(5, 5); + m_vebview_release_note->SetScrollRate(5, FromDIP(20)); m_vebview_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8)); m_vebview_release_note->SetMaxSize(wxSize(FromDIP(560), FromDIP(430))); @@ -142,7 +142,7 @@ UpdatePluginDialog::UpdatePluginDialog(wxWindow* parent /*= nullptr*/) operation_tips->SetMaxSize(wxSize(FromDIP(260), -1)); m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); - m_vebview_release_note->SetScrollRate(5, 5); + m_vebview_release_note->SetScrollRate(5, FromDIP(20)); m_vebview_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8)); m_vebview_release_note->SetMinSize(wxSize(FromDIP(260), FromDIP(150))); m_vebview_release_note->SetMaxSize(wxSize(FromDIP(260), FromDIP(150))); @@ -277,7 +277,7 @@ UpdateVersionDialog::UpdateVersionDialog(wxWindow *parent) m_simplebook_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8)); m_scrollwindows_release_note = new wxScrolledWindow(m_simplebook_release_note, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(560), FromDIP(430)), wxVSCROLL); - m_scrollwindows_release_note->SetScrollRate(5, 5); + m_scrollwindows_release_note->SetScrollRate(5, FromDIP(20)); m_scrollwindows_release_note->SetBackgroundColour(wxColour(0xF8, 0xF8, 0xF8)); //webview @@ -538,7 +538,7 @@ SecondaryCheckDialog::SecondaryCheckDialog(wxWindow* parent, wxWindowID id, cons m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15)); m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); - m_vebview_release_note->SetScrollRate(0, 5); + m_vebview_release_note->SetScrollRate(0, FromDIP(20)); m_vebview_release_note->SetBackgroundColour(*wxWHITE); m_vebview_release_note->SetMinSize(wxSize(FromDIP(400), FromDIP(380))); m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15)); @@ -823,7 +823,7 @@ PrintErrorDialog::PrintErrorDialog(wxWindow* parent, wxWindowID id, const wxStri m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(5)); m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); - m_vebview_release_note->SetScrollRate(0, 5); + m_vebview_release_note->SetScrollRate(0, FromDIP(20)); m_vebview_release_note->SetBackgroundColour(*wxWHITE); m_vebview_release_note->SetMinSize(wxSize(FromDIP(320), FromDIP(250))); m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15)); @@ -1122,7 +1122,7 @@ ConfirmBeforeSendDialog::ConfirmBeforeSendDialog(wxWindow* parent, wxWindowID id m_sizer_right->Add(0, 0, 1, wxTOP, FromDIP(15)); m_vebview_release_note = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); - m_vebview_release_note->SetScrollRate(0, 5); + m_vebview_release_note->SetScrollRate(0, FromDIP(20)); m_vebview_release_note->SetBackgroundColour(*wxWHITE); m_vebview_release_note->SetMinSize(wxSize(FromDIP(400), FromDIP(380))); m_sizer_right->Add(m_vebview_release_note, 0, wxEXPAND | wxRIGHT | wxLEFT, FromDIP(15)); diff --git a/src/slic3r/GUI/SafetyOptionsDialog.cpp b/src/slic3r/GUI/SafetyOptionsDialog.cpp index 6536666bb1..c633d2778e 100644 --- a/src/slic3r/GUI/SafetyOptionsDialog.cpp +++ b/src/slic3r/GUI/SafetyOptionsDialog.cpp @@ -31,7 +31,7 @@ SafetyOptionsDialog::SafetyOptionsDialog(wxWindow* parent) SetSize(FromDIP(480),FromDIP(320)); m_scrollwindow = new wxScrolledWindow(this, wxID_ANY); - m_scrollwindow->SetScrollRate(0, FromDIP(10)); + m_scrollwindow->SetScrollRate(0, FromDIP(20)); m_scrollwindow->SetBackgroundColour(*wxWHITE); m_scrollwindow->SetMinSize(wxSize(FromDIP(480), wxDefaultCoord)); m_scrollwindow->SetMaxSize(wxSize(FromDIP(480), wxDefaultCoord)); @@ -272,4 +272,4 @@ void SafetyOptionsDialog::show_idel_heating_toast(const wxString &text) m_idel_heating_toast_timer.StartOnce(3000); } -}} // namespace Slic3r::GUI \ No newline at end of file +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/SceneRaycaster.cpp b/src/slic3r/GUI/SceneRaycaster.cpp index 64a091211b..408e910ff8 100644 --- a/src/slic3r/GUI/SceneRaycaster.cpp +++ b/src/slic3r/GUI/SceneRaycaster.cpp @@ -99,8 +99,11 @@ void SceneRaycaster::remove_raycaster(std::shared_ptr item) } } -SceneRaycaster::HitResult SceneRaycaster::hit(const Vec2d& mouse_pos, const Camera& camera, const ClippingPlane* clipping_plane) const +SceneRaycaster::HitResult SceneRaycaster::hit(const Vec2d& mouse_pos, const Camera& camera, + const ClippingPlane* clipping_plane, SceneRaycaster::EHitMode mode) const { + // Orca: Picking may favor an already selected volume for interaction, while camera + // navigation must always use the geometrically closest visible scene surface. // helper class used to return currently selected volume as hit when overlapping with other volumes // to allow the user to click and drag on a selected volume class VolumeKeeper @@ -110,7 +113,11 @@ SceneRaycaster::HitResult SceneRaycaster::hit(const Vec2d& mouse_pos, const Came bool m_selected_volume_already_found{ false }; public: - VolumeKeeper() { + explicit VolumeKeeper(bool enabled) { + // Orca: Disable selected-volume bias for navigation raycasts. + if (!enabled) + return; + const Selection& selection = wxGetApp().plater()->get_selection(); if (selection.is_single_volume() || selection.is_single_modifier()) { const GLVolume* volume = selection.get_first_volume(); @@ -135,7 +142,7 @@ SceneRaycaster::HitResult SceneRaycaster::hit(const Vec2d& mouse_pos, const Came } }; - VolumeKeeper volume_keeper; + VolumeKeeper volume_keeper(mode == EHitMode::Picking); double closest_hit_squared_distance = std::numeric_limits::max(); auto is_closest = [&closest_hit_squared_distance, &volume_keeper](const Camera& camera, const Vec3f& hit) { @@ -154,7 +161,7 @@ SceneRaycaster::HitResult SceneRaycaster::hit(const Vec2d& mouse_pos, const Came HitResult ret; - auto test_raycasters = [this, is_closest, clipping_plane, &volume_keeper](EType type, const Vec2d& mouse_pos, const Camera& camera, HitResult& ret) { + auto test_raycasters = [this, is_closest, clipping_plane, mode, &volume_keeper](EType type, const Vec2d& mouse_pos, const Camera& camera, HitResult& ret) { const ClippingPlane* clip_plane = (clipping_plane != nullptr && type == EType::Volume) ? clipping_plane : nullptr; const std::vector>* raycasters = get_raycasters(type); const Vec3f camera_forward = camera.get_dir_forward().cast(); @@ -163,12 +170,22 @@ SceneRaycaster::HitResult SceneRaycaster::hit(const Vec2d& mouse_pos, const Came if (!item->is_active()) continue; + // Each plate's component 0 is its surface; the remaining Bed IDs are controls. + // Keep controls clickable, but do not use them as camera-pan anchors. + if (mode != EHitMode::Picking && type == EType::Bed && + decode_id(type, item->get_id()) % PartPlate::GRABBER_COUNT != 0) + continue; + current_hit.raycaster_id = item->get_id(); const Transform3d& trafo = item->get_transform(); if (item->get_raycaster()->closest_hit(mouse_pos, trafo, camera, current_hit.position, current_hit.normal, clip_plane)) { current_hit.position = (trafo * current_hit.position.cast()).cast(); current_hit.normal = (trafo.matrix().block(0, 0, 3, 3).inverse().transpose() * current_hit.normal.cast()).normalized().cast(); - if (item->use_back_faces() || current_hit.normal.dot(camera_forward) < 0.0f) { + // Orca: Perspective rays away from the viewport center are not parallel to camera_forward. + // Keep picking's legacy policy, but accept every front-facing navigation surface. + const Vec3f view_direction = mode != EHitMode::Picking && camera.get_type() == Camera::EType::Perspective ? + Vec3f((current_hit.position.cast() - camera.get_position()).cast()) : camera_forward; + if (item->use_back_faces() || current_hit.normal.dot(view_direction) < 0.0f) { if (is_closest(camera, current_hit.position)) { if (volume_keeper.is_active()) { if (volume_keeper.check_hit_result(current_hit)) @@ -182,14 +199,18 @@ SceneRaycaster::HitResult SceneRaycaster::hit(const Vec2d& mouse_pos, const Came } }; - if (!m_gizmos.empty()) - test_raycasters(EType::Gizmo, mouse_pos, camera, ret); + // Orca: Gizmo geometry is an interaction target, not a valid depth anchor for camera movement. + if (mode == EHitMode::Picking) { + if (!m_gizmos.empty()) + test_raycasters(EType::Gizmo, mouse_pos, camera, ret); - if (!m_fallback_gizmos.empty() && !ret.is_valid()) - test_raycasters(EType::FallbackGizmo, mouse_pos, camera, ret); + if (!m_fallback_gizmos.empty() && !ret.is_valid()) + test_raycasters(EType::FallbackGizmo, mouse_pos, camera, ret); + } if (!m_gizmos_on_top || !ret.is_valid()) { - if (camera.is_looking_downward() && !m_bed.empty()) + // Orca: In perspective the bottom of the viewport can see the bed even at a horizontal view. + if ((mode == EHitMode::SceneOnly || (mode == EHitMode::Picking && camera.is_looking_downward())) && !m_bed.empty()) test_raycasters(EType::Bed, mouse_pos, camera, ret); if (!m_volumes.empty()) test_raycasters(EType::Volume, mouse_pos, camera, ret); diff --git a/src/slic3r/GUI/SceneRaycaster.hpp b/src/slic3r/GUI/SceneRaycaster.hpp index 99152712dd..9aa527abee 100644 --- a/src/slic3r/GUI/SceneRaycaster.hpp +++ b/src/slic3r/GUI/SceneRaycaster.hpp @@ -57,6 +57,15 @@ public: FallbackGizmo = 2000000 }; + // Orca: Navigation needs the closest visible scene surface, without picking-specific + // gizmo and selected-volume priority. + enum class EHitMode : unsigned char + { + Picking, + SceneOnly, + VolumesOnly // Navigation when the bed is hidden. + }; + struct HitResult { EType type{ EType::None }; @@ -97,7 +106,8 @@ public: void set_gizmos_on_top(bool value) { m_gizmos_on_top = value; } - HitResult hit(const Vec2d& mouse_pos, const Camera& camera, const ClippingPlane* clipping_plane = nullptr) const; + HitResult hit(const Vec2d& mouse_pos, const Camera& camera, const ClippingPlane* clipping_plane = nullptr, + EHitMode mode = EHitMode::Picking) const; #if ENABLE_RAYCAST_PICKING_DEBUG void render_hit(const Camera& camera); diff --git a/src/slic3r/GUI/SelectMachine.cpp b/src/slic3r/GUI/SelectMachine.cpp index 629aef7296..04eb2b1612 100644 --- a/src/slic3r/GUI/SelectMachine.cpp +++ b/src/slic3r/GUI/SelectMachine.cpp @@ -75,6 +75,9 @@ std::string get_nozzle_volume_type_cloud_string(NozzleVolumeType nozzle_volume_t else if (nozzle_volume_type == NozzleVolumeType::nvtTPUHighFlow) { return "tpu_high_flow"; } + else if (nozzle_volume_type == NozzleVolumeType::nvtE3DHighFlow) { + return "e3d_high_flow"; + } else if (nozzle_volume_type == NozzleVolumeType::nvtHybrid) { // to be supported return "hybrid_flow"; @@ -148,7 +151,7 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater) wxBoxSizer* m_scroll_sizer = new wxBoxSizer(wxVERTICAL); m_scroll_area = new wxScrolledWindow(this); - m_scroll_area->SetScrollRate(0, 20); + m_scroll_area->SetScrollRate(0, FromDIP(20)); m_scroll_area->SetBackgroundColour(m_colour_def_color); m_scroll_area->SetMinSize(wxSize(FromDIP(700), FromDIP(600))); m_scroll_area->SetMaxSize(wxSize(FromDIP(700), FromDIP(600))); @@ -707,7 +710,7 @@ SelectMachineDialog::SelectMachineDialog(Plater *plater) //show bind failed info m_sw_print_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125)), wxVSCROLL); m_sw_print_failed_info->SetBackgroundColour(*wxWHITE); - m_sw_print_failed_info->SetScrollRate(0, 5); + m_sw_print_failed_info->SetScrollRate(0, FromDIP(20)); m_sw_print_failed_info->SetMinSize(wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125))); m_sw_print_failed_info->SetMaxSize(wxSize(SELECT_MACHINE_DIALOG_SIMBOOK_SIZE2.x, FromDIP(125))); @@ -3470,7 +3473,7 @@ void SelectMachineDialog::navigate_to_timelapse_page() main_frame->jump_to_monitor(); // then switch to Storage (Media) tab inside Monitor - auto* monitor = dynamic_cast(main_frame->m_monitor); + MonitorPanel* monitor = MonitorPanel::if_built(); if (monitor) { auto* tabpanel = monitor->get_tabpanel(); if (tabpanel) { diff --git a/src/slic3r/GUI/SelectMachinePop.cpp b/src/slic3r/GUI/SelectMachinePop.cpp index 9b34e74f23..0046fd5f7f 100644 --- a/src/slic3r/GUI/SelectMachinePop.cpp +++ b/src/slic3r/GUI/SelectMachinePop.cpp @@ -327,7 +327,7 @@ SelectMachinePopup::SelectMachinePopup(wxWindow *parent) m_scrolledWindow = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, SELECT_MACHINE_LIST_SIZE, wxHSCROLL | wxVSCROLL); m_scrolledWindow->SetBackgroundColour(*wxWHITE); m_scrolledWindow->SetMinSize(SELECT_MACHINE_LIST_SIZE); - m_scrolledWindow->SetScrollRate(0, 5); + m_scrolledWindow->SetScrollRate(0, SELECT_MACHINE_ITEM_SIZE.y); auto m_sizxer_scrolledWindow = new wxBoxSizer(wxVERTICAL); m_scrolledWindow->SetSizer(m_sizxer_scrolledWindow); m_scrolledWindow->Layout(); diff --git a/src/slic3r/GUI/Selection.cpp b/src/slic3r/GUI/Selection.cpp index 84f4a0b836..81dd074096 100644 --- a/src/slic3r/GUI/Selection.cpp +++ b/src/slic3r/GUI/Selection.cpp @@ -67,7 +67,7 @@ bool Selection::Clipboard::is_sla_compliant() const return false; for (const ModelVolume* v : o->volumes) { - if (v->is_modifier()) + if (v->is_modifier() || v->is_precise_seam()) // Precise Seam not supported in SLA return false; } } diff --git a/src/slic3r/GUI/SendMultiMachinePage.cpp b/src/slic3r/GUI/SendMultiMachinePage.cpp index cafbb360e6..b386d1f451 100644 --- a/src/slic3r/GUI/SendMultiMachinePage.cpp +++ b/src/slic3r/GUI/SendMultiMachinePage.cpp @@ -278,7 +278,7 @@ SendMultiMachinePage::SendMultiMachinePage(Plater* plater) m_main_scroll = new ScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxVSCROLL); m_main_scroll->SetBackgroundColour(*wxWHITE); - m_main_scroll->SetScrollRate(5, 5); + m_main_scroll->SetScrollRate(5, FromDIP(20)); m_sizer_body = new wxBoxSizer(wxVERTICAL); m_main_page = create_page(); @@ -1353,7 +1353,7 @@ wxPanel* SendMultiMachinePage::create_page() scroll_macine_list = new wxScrolledWindow(main_page, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(800), FromDIP(300)), wxHSCROLL | wxVSCROLL); scroll_macine_list->SetBackgroundColour(*wxWHITE); - scroll_macine_list->SetScrollRate(5, 5); + scroll_macine_list->SetScrollRate(5, FromDIP(SEND_ITEM_MAX_HEIGHT)); scroll_macine_list->SetMinSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(SEND_ITEM_MAX_HEIGHT))); scroll_macine_list->SetMaxSize(wxSize(FromDIP(DEVICE_ITEM_MAX_WIDTH), 10 * FromDIP(SEND_ITEM_MAX_HEIGHT))); diff --git a/src/slic3r/GUI/SendToPrinter.cpp b/src/slic3r/GUI/SendToPrinter.cpp index c4db0423ab..9071c0affd 100644 --- a/src/slic3r/GUI/SendToPrinter.cpp +++ b/src/slic3r/GUI/SendToPrinter.cpp @@ -384,7 +384,7 @@ SendToPrinterDialog::SendToPrinterDialog(Plater *plater) //show bind failed info m_sw_print_failed_info = new wxScrolledWindow(this, wxID_ANY, wxDefaultPosition, wxSize(FromDIP(380), FromDIP(125)), wxVSCROLL); m_sw_print_failed_info->SetBackgroundColour(*wxWHITE); - m_sw_print_failed_info->SetScrollRate(0, 5); + m_sw_print_failed_info->SetScrollRate(0, FromDIP(20)); m_sw_print_failed_info->SetMinSize(wxSize(FromDIP(380), FromDIP(125))); m_sw_print_failed_info->SetMaxSize(wxSize(FromDIP(380), FromDIP(125))); diff --git a/src/slic3r/GUI/Shortcuts.cpp b/src/slic3r/GUI/Shortcuts.cpp index 0bcf0ccef9..be713b7cf8 100644 --- a/src/slic3r/GUI/Shortcuts.cpp +++ b/src/slic3r/GUI/Shortcuts.cpp @@ -147,9 +147,11 @@ constexpr std::array shortcut_table = {{ SHORTCUT(Search, "search", L("Search"), GLOBAL, { 'F', CTRL }), SHORTCUT(SwitchView, "switch_view", L("Switch between Prepare/Preview"), CANVAS, { WXK_TAB }), SHORTCUT(CollapseSidebar, "collapse_sidebar", L("Collapse/Expand the sidebar"), CANVAS, { WXK_TAB, SHIFT }), - SHORTCUT(SpeedDial, "speed_dial", L("Open the speed dial"), GLOBAL, { WXK_SPACE }), SHORTCUT(ReloadDevicePage, "reload_device_page", L("Reload the device page"), CANVAS, { WXK_F5 }), SHORTCUT(KeyboardShortcuts, "keyboard_shortcuts", L("Show keyboard shortcuts list"), CANVAS, { '?' }), + + // Speed Dial + SHORTCUT(SpeedDial, "speed_dial", L("Open the Speed Dial"), GLOBAL, { WXK_SPACE }), }}; #undef SHORTCUT @@ -177,6 +179,7 @@ constexpr std::array section_table { Shortcut::ViewDefault, L("Camera") }, { Shortcut::ShowLabels, L("Display") }, { Shortcut::Preferences, L("Application") }, + { Shortcut::SpeedDial, L("Speed Dial") }, }}; constexpr bool sections_follow_table_order() diff --git a/src/slic3r/GUI/Shortcuts.hpp b/src/slic3r/GUI/Shortcuts.hpp index ba002556ca..71fe299a98 100644 --- a/src/slic3r/GUI/Shortcuts.hpp +++ b/src/slic3r/GUI/Shortcuts.hpp @@ -47,7 +47,9 @@ enum class Shortcut : uint8_t { // Display ShowLabels, ShowWireframe, ToggleGcodeWindow, ToggleOneLayerMode, // Application - Preferences, Search, SwitchView, CollapseSidebar, SpeedDial, ReloadDevicePage, KeyboardShortcuts, + Preferences, Search, SwitchView, CollapseSidebar, ReloadDevicePage, KeyboardShortcuts, + // Speed Dial + SpeedDial, Count }; @@ -66,7 +68,7 @@ struct ShortcutInfo // Headings of the shortcuts dialog, in listing order. enum class ShortcutSection : uint8_t { - Project, SlicingAndPrinting, Selection, Editing, Objects, Placement, Gizmos, Sliders, PaintingTools, Camera, Display, Application, + Project, SlicingAndPrinting, Selection, Editing, Objects, Placement, Gizmos, Sliders, PaintingTools, Camera, Display, Application, SpeedDial, Count }; diff --git a/src/slic3r/GUI/SpeedDialDialog.cpp b/src/slic3r/GUI/SpeedDialDialog.cpp index 7be8bee123..1d81021a60 100644 --- a/src/slic3r/GUI/SpeedDialDialog.cpp +++ b/src/slic3r/GUI/SpeedDialDialog.cpp @@ -9,6 +9,8 @@ #include "Plater.hpp" #include "Widgets/WebViewHostDialog.hpp" +#include "slic3r/Utils/MacDarkMode.hpp" + #include #include @@ -82,39 +84,38 @@ nlohmann::json speed_dial_ui_strings() {"shortcut_alt", alt}, {"shortcut_ctrl", ctrl}, - {"sd_search", _u8L("Search actions")}, - {"sd_clear", _u8L("Clear")}, - {"sd_search_n", _u8L("Search %s actions")}, - {"sd_recent", _u8L("Recent")}, - {"sd_plugins", _u8L("Plugins")}, - {"sd_other", _u8L("Other")}, - {"sd_no_match_total", _u8L("No actions match (Total: %s)")}, - {"sd_no_actions", _u8L("No actions yet")}, - {"sd_no_tabs_match", _u8L("No tabs match")}, - {"sd_no_tabs", _u8L("No tabs")}, - {"sd_result_count", _u8L("Showing %s of %s actions")}, + {"sd_search", _u8L("Search actions")}, + {"sd_clear", _u8L("Clear")}, + {"sd_recent", _u8L("Recent")}, + {"sd_plugins", _u8L("Plugins")}, + {"sd_other", _u8L("Other")}, + {"sd_no_match_total", _u8L("No actions match (Total: %s)")}, + {"sd_no_actions", _u8L("No actions yet")}, + {"sd_no_tabs_match", _u8L("No tabs match")}, + {"sd_no_tabs", _u8L("No tabs")}, + {"sd_result_count", _u8L("Showing %s actions")}, {"sd_result_count_all", _u8L("%s actions")}, - {"sd_tab_count", _u8L("%s tabs")}, + {"sd_tab_count", _u8L("%s tabs")}, {"sd_tab_match_count", _u8L("%s matches")}, - {"sd_favs_full", _u8L("Favourites are full (%s max)")}, - {"sd_go_to_pct", _u8L("Go to %s%% of the layer range")}, - {"sd_enter_pct", _u8L("Enter a layer percentage (0-100)")}, - {"sd_go_layer_ph", _u8L("Go to layer %% (0-100)")}, - {"sd_go_tab_ph", _u8L("Go to tab")}, - {"sd_fav_slot", _u8L("Favourite %s (%s)")}, - {"sd_pin_fav", _u8L("Pin to favourites (%s)")}, - {"sd_unpin_fav", _u8L("Unpin from favourites (%s)")}, - {"sd_remove_fav", _u8L("Remove from favourites")}, - {"sd_move_left", _u8L("Move left")}, - {"sd_move_right", _u8L("Move right")}, - {"sd_unpin", _u8L("Unpin")}, - {"sd_mode_advanced", _u8L("Advanced")}, - {"sd_mode_expert", _u8L("Expert")}, - {"sd_mode_develop", _u8L("Developer")}, - {"sd_wiki_f1", _u8L("Wiki (F1)")}, - {"sd_no_wiki", _u8L("No wiki page for this action")}, - {"sd_show_details", _u8L("Show details")}, - {"sd_hide_details", _u8L("Hide details")}, + {"sd_favs_full", _u8L("Favourites are full (%s max)")}, + {"sd_go_to_pct", _u8L("Go to %s%% of the layer range")}, + {"sd_enter_pct", _u8L("Enter a layer percentage (0-100)")}, + {"sd_go_layer_ph", _u8L("Go to layer %% (0-100)")}, + {"sd_go_tab_ph", _u8L("Go to tab")}, + {"sd_fav_slot", _u8L("Favourite %s (%s)")}, + {"sd_pin_fav", _u8L("Pin to favourites (%s)")}, + {"sd_unpin_fav", _u8L("Unpin from favourites (%s)")}, + {"sd_remove_fav", _u8L("Remove from favourites")}, + {"sd_move_left", _u8L("Move left")}, + {"sd_move_right", _u8L("Move right")}, + {"sd_unpin", _u8L("Unpin")}, + {"sd_mode_advanced", _u8L("Advanced")}, + {"sd_mode_expert", _u8L("Expert")}, + {"sd_mode_develop", _u8L("Developer")}, + {"sd_wiki_f1", _u8L("Wiki (F1)")}, + {"sd_no_wiki", _u8L("No wiki page for this action")}, + {"sd_show_details", _u8L("Show details")}, + {"sd_hide_details", _u8L("Hide details")}, }; } @@ -178,6 +179,7 @@ void SpeedDialWebDialog::request_show() if (IsShown()) { Raise(); focus_webview(browser(), m_page_ready); + repaint_webview(); return; } @@ -189,6 +191,7 @@ void SpeedDialWebDialog::request_show() // Grab focus now and again on wxEVT_ACTIVATE; grabbing directly on the WebKit widget is // what makes typing reach the search field immediately on open. focus_webview(browser(), m_page_ready); + repaint_webview(); } void SpeedDialWebDialog::on_script_message(const nlohmann::json& payload) @@ -216,7 +219,7 @@ void SpeedDialWebDialog::handle_web_command(const nlohmann::json& payload) // set_favourite() refuses once the bar hits kFavLimit; tell the page so it can undo the // pin and show a "favourites are full" hint instead of silently losing the favourite. const std::string fav_id = payload.value("id", ""); - const bool ok = wxGetApp().action_registry().set_favourite(fav_id, payload.value("fav", false)); + const bool ok = wxGetApp().action_registry().set_favourite(fav_id, payload.value("fav", false)); if (!ok) call_web_handler({{"command", "favourite_full"}, {"limit", (int) ActionRegistry::kFavLimit}, {"id", fav_id}}); } else if (command == "reorder_favourites") { @@ -265,14 +268,36 @@ void SpeedDialWebDialog::resize_to_content(int height) Layout(); #ifdef __WXOSX__ // WKWebView can lag the dialog's new client size; force the viewport to match so the page is - // never painted (and clipped by the rounded layer) below the footer. - if (wxWebView* wv = browser()) { - const wxSize client = GetClientSize(); - if (wv->GetSize() != client) - wv->SetSize(client); - } + // never painted (and clipped by the rounded layer) below the footer. Unconditional: on a + // re-open the size is often unchanged, and skipping the sync leaves the fresh render unpainted. + if (wxWebView* wv = browser()) + wv->SetSize(GetClientSize()); #endif apply_rounded_shape(); + // A re-open re-renders at (usually) the same size, so nothing above may generate damage. + // Repaint explicitly so the newly rendered list is shown without needing user input. + repaint_webview(); +} + +void SpeedDialWebDialog::repaint_webview() +{ + wxWebView* wv = browser(); + if (!wv) + return; + // Portable invalidate; the platform blocks below reach the widget/layer that actually paints. + wv->Refresh(); +#ifdef __WXOSX__ + if (void* nb = wv->GetNativeBackend()) + WKWebView_force_display(nb); + wv->Update(); +#elif defined(__linux__) + // WebKitGTK's WebKitWebView owns its own GdkWindow, so invalidating the wxWebView wrapper + // (the GtkScrolledWindow) does not redraw it. + if (void* nb = wv->GetNativeBackend()) + gtk_widget_queue_draw((GtkWidget*) nb); +#else + wv->Update(); +#endif } // Rounded corners: the webview paints an opaque rectangle, so round the whole top-level window. @@ -331,8 +356,8 @@ void SpeedDialWebDialog::run_action(const std::string& id, const std::string& ti return; // Only plugin actions get the "Run plugin?" confirm. Built-in commands act immediately. - const bool ask = a->kind == AppActionKind::Plugin && reg.should_ask(id); - const std::string atitle = a->title(); + const bool ask = a->kind == AppActionKind::Plugin && reg.should_ask(id); + const std::string atitle = a->title(); const ConfigOptionMode required = a->required_mode; // Settings the current mode hides require a switch first. Ask while the dial is still up; a @@ -341,16 +366,15 @@ void SpeedDialWebDialog::run_action(const std::string& id, const std::string& ti const wxString setting = title.empty() ? from_u8(atitle) : from_u8(title); if (required == comDevelop) { RichMessageDialog dlg(wxGetApp().mainframe, - wxString::Format(_L("\"%s\" is a Developer setting. Enable Developer mode to edit it?"), - setting), + wxString::Format(_L("\"%s\" is a Developer setting. Enable Developer mode to edit it?"), setting), _L("Developer setting"), wxOK | wxCANCEL); if (dlg.ShowModal() != wxID_OK) return; wxGetApp().enable_developer_mode(); } else { RichMessageDialog dlg(wxGetApp().mainframe, - wxString::Format(_L("\"%s\" is a %s setting. Switch from %s mode to %s mode to edit it?"), - setting, mode_label(required), mode_label(wxGetApp().get_mode()), mode_label(required)), + wxString::Format(_L("\"%s\" is a %s setting. Switch from %s mode to %s mode to edit it?"), setting, + mode_label(required), mode_label(wxGetApp().get_mode()), mode_label(required)), _L("Switch settings mode"), wxOK | wxCANCEL); if (dlg.ShowModal() != wxID_OK) return; diff --git a/src/slic3r/GUI/SpeedDialDialog.hpp b/src/slic3r/GUI/SpeedDialDialog.hpp index 8ae745b446..d3b75f2256 100644 --- a/src/slic3r/GUI/SpeedDialDialog.hpp +++ b/src/slic3r/GUI/SpeedDialDialog.hpp @@ -28,6 +28,10 @@ private: void send_actions(); void search_tabs(); void apply_rounded_shape(); + // Forces the webview to repaint after it is mapped / re-rendered. The popup is transparent and + // chrome-less, so a missed frame leaves it blank until input; platform-specific because the + // widget that actually paints is not always the wxWebView wrapper. + void repaint_webview(); void on_dpi_changed(const wxRect& suggested_rect) override; bool m_page_ready{false}; diff --git a/src/slic3r/GUI/StagedBuild.hpp b/src/slic3r/GUI/StagedBuild.hpp new file mode 100644 index 0000000000..8f4c0454c3 --- /dev/null +++ b/src/slic3r/GUI/StagedBuild.hpp @@ -0,0 +1,60 @@ +#pragma once + +#include +#include +#include + +namespace Slic3r { namespace GUI { + +// A panel whose constructor builds the skeleton and queues the rest as steps, run in order +// on the main thread, one at a time. +class StagedBuild +{ +public: + virtual ~StagedBuild() = default; + + bool built() const + { + return m_next_step == m_steps.size() && + std::all_of(m_children.begin(), m_children.end(), [](const StagedBuild* child) { return child->built(); }); + } + + // Runs one step and returns true while more remain. Own steps first, then whatever a + // child queued after its steps were forwarded. + bool build_step() + { + if (m_next_step < m_steps.size()) { + // Copied out, since a step may queue more steps and reallocate m_steps. + auto step = std::move(m_steps[m_next_step++]); + step(); + } else if (StagedBuild* child = unfinished_child()) { + child->build_step(); + } + return !built(); + } + +protected: + void add_build_step(std::function step) { m_steps.push_back(std::move(step)); } + + // Queues one step per step the child has now, and keeps the child so that built() waits + // for any it queues later. + void add_build_steps_of(StagedBuild& child) + { + m_children.push_back(&child); + for (size_t i = child.m_next_step; i < child.m_steps.size(); ++i) + add_build_step([&child] { child.build_step(); }); + } + +private: + StagedBuild* unfinished_child() const + { + auto it = std::find_if(m_children.begin(), m_children.end(), [](const StagedBuild* child) { return !child->built(); }); + return it == m_children.end() ? nullptr : *it; + } + + std::vector> m_steps; + std::vector m_children; + size_t m_next_step{ 0 }; +}; + +}} // namespace Slic3r::GUI diff --git a/src/slic3r/GUI/StatusPanel.cpp b/src/slic3r/GUI/StatusPanel.cpp index fb0029edc3..0b6e4b6577 100644 --- a/src/slic3r/GUI/StatusPanel.cpp +++ b/src/slic3r/GUI/StatusPanel.cpp @@ -1302,7 +1302,7 @@ void PrintingTaskPanel::set_star_count(int star_count) StatusBasePanel::StatusBasePanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wxSize &size, long style, const wxString &name) : wxScrolledWindow(parent, id, pos, size, wxHSCROLL | wxVSCROLL) { - this->SetScrollRate(25, 25); + SetScrollRate(25, FromDIP(20)); Slic3r::DeviceManager* dev = Slic3r::GUI::wxGetApp().getDeviceManager(); if (!dev) return; obj = dev->get_selected_machine(); @@ -1328,18 +1328,21 @@ StatusBasePanel::StatusBasePanel(wxWindow *parent, wxWindowID id, const wxPoint wxBoxSizer *bSizer_left = new wxBoxSizer(wxVERTICAL); - auto m_monitoring_sizer = create_monitoring_page(); - bSizer_left->Add(m_monitoring_sizer, 1, wxEXPAND | wxALL, 0); + // The sizers are nested here so each step only appends to its own. + add_build_step([this, bSizer_left] { + auto m_monitoring_sizer = create_monitoring_page(); + bSizer_left->Add(m_monitoring_sizer, 1, wxEXPAND | wxALL, 0); - auto m_panel_separotor1 = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL); - m_panel_separotor1->SetBackgroundColour(STATUS_PANEL_BG); - m_panel_separotor1->SetMinSize(wxSize(-1, PAGE_SPACING)); - m_panel_separotor1->SetMaxSize(wxSize(-1, PAGE_SPACING)); - m_monitoring_sizer->Add(m_panel_separotor1, 0, wxEXPAND, 0); + auto m_panel_separotor1 = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL); + m_panel_separotor1->SetBackgroundColour(STATUS_PANEL_BG); + m_panel_separotor1->SetMinSize(wxSize(-1, PAGE_SPACING)); + m_panel_separotor1->SetMaxSize(wxSize(-1, PAGE_SPACING)); + m_monitoring_sizer->Add(m_panel_separotor1, 0, wxEXPAND, 0); - m_project_task_panel = new PrintingTaskPanel(this, PrintingTaskType::PRINGINT); - m_project_task_panel->init_bitmaps(); - m_monitoring_sizer->Add(m_project_task_panel, 0, wxALL | wxEXPAND , 0); + m_project_task_panel = new PrintingTaskPanel(this, PrintingTaskType::PRINGINT); + m_project_task_panel->init_bitmaps(); + m_monitoring_sizer->Add(m_project_task_panel, 0, wxALL | wxEXPAND , 0); + }); // auto m_panel_separotor2 = new wxPanel(this, wxID_ANY, wxDefaultPosition, wxDefaultSize, wxTAB_TRAVERSAL); // m_panel_separotor2->SetBackgroundColour(STATUS_PANEL_BG); @@ -1359,8 +1362,10 @@ StatusBasePanel::StatusBasePanel(wxWindow *parent, wxWindowID id, const wxPoint m_machine_ctrl_panel->SetDoubleBuffered(true); auto m_machine_control = create_machine_control_page(m_machine_ctrl_panel); m_machine_ctrl_panel->SetSizer(m_machine_control); - m_machine_ctrl_panel->Layout(); - m_machine_control->Fit(m_machine_ctrl_panel); + add_build_step([this, m_machine_control] { + m_machine_ctrl_panel->Layout(); + m_machine_control->Fit(m_machine_ctrl_panel); + }); bSizer_status_below->Add(m_machine_ctrl_panel, 0, wxALL, 0); @@ -1375,8 +1380,11 @@ StatusBasePanel::StatusBasePanel(wxWindow *parent, wxWindowID id, const wxPoint m_panel_separotor_bottom->SetBackgroundColour(STATUS_PANEL_BG); bSizer_status->Add(m_panel_separotor_bottom, 0, wxEXPAND | wxALL, 0); - this->SetSizerAndFit(bSizer_status); - this->Layout(); + this->SetSizer(bSizer_status); + add_build_step([this, bSizer_status] { + bSizer_status->SetSizeHints(this); + this->Layout(); + }); } StatusBasePanel::~StatusBasePanel() @@ -1614,16 +1622,24 @@ wxBoxSizer *StatusBasePanel::create_machine_control_page(wxWindow *parent) wxBoxSizer *bSizer_control = new wxBoxSizer(wxVERTICAL); - auto temp_axis_ctrl_sizer = create_temp_axis_group(parent); - auto m_filament_load_sizer = create_filament_group(parent); - + // The slot sizers keep each group's place in bSizer_control. + wxBoxSizer *temp_axis_slot = new wxBoxSizer(wxVERTICAL); + wxBoxSizer *filament_slot = new wxBoxSizer(wxVERTICAL); /* ams control box or live nozzle-rack panel (rack printers switch between the two) */ wxSizer *ams_rack_sizer = new wxBoxSizer(wxHORIZONTAL); - ams_rack_sizer->Add(create_ams_group(parent), 0, wxEXPAND | wxLEFT); - m_panel_nozzle_rack = new wgtDeviceNozzleRack(parent); - m_panel_nozzle_rack->Show(false); - ams_rack_sizer->Add(m_panel_nozzle_rack, 0, wxEXPAND | wxLEFT); + add_build_step([this, parent, temp_axis_slot, filament_slot] { + temp_axis_slot->Add(create_temp_axis_group(parent), 0, wxEXPAND); + filament_slot->Add(create_filament_group(parent), 0, wxEXPAND); + }); + add_build_step([this, parent, ams_rack_sizer] { + ams_rack_sizer->Add(create_ams_group(parent), 0, wxEXPAND | wxLEFT); + }); + add_build_step([this, parent, ams_rack_sizer] { + m_panel_nozzle_rack = new wgtDeviceNozzleRack(parent); + m_panel_nozzle_rack->Show(false); + ams_rack_sizer->Add(m_panel_nozzle_rack, 0, wxEXPAND | wxLEFT); + }); m_ams_rack_switch = new SwitchBoard(parent, _L("Filament"), _L("Hotends"), wxSize(FromDIP(126), FromDIP(26))); m_ams_rack_switch->updateState("left"); @@ -1631,12 +1647,12 @@ wxBoxSizer *StatusBasePanel::create_machine_control_page(wxWindow *parent) m_ams_rack_switch->Bind(wxCUSTOMEVT_SWITCH_POS, &StatusBasePanel::on_ams_rack_switch, this); bSizer_control->Add(0, 0, 0, wxTOP, FromDIP(8)); - bSizer_control->Add(temp_axis_ctrl_sizer, 0, wxALIGN_CENTER|wxLEFT|wxRIGHT, FromDIP(8)); + bSizer_control->Add(temp_axis_slot, 0, wxALIGN_CENTER|wxLEFT|wxRIGHT, FromDIP(8)); bSizer_control->Add(m_ams_rack_switch, 0, wxALIGN_CENTRE|wxTOP, FromDIP(6)); bSizer_control->Add(0, 0, 0, wxTOP, FromDIP(6)); bSizer_control->Add(ams_rack_sizer, 0, wxALIGN_CENTER|wxLEFT|wxRIGHT, FromDIP(8)); bSizer_control->Add(0, 0, 0, wxTOP, FromDIP(6)); - bSizer_control->Add(m_filament_load_sizer, 0, wxALIGN_CENTER|wxLEFT|wxRIGHT, FromDIP(8)); + bSizer_control->Add(filament_slot, 0, wxALIGN_CENTER|wxLEFT|wxRIGHT, FromDIP(8)); bSizer_control->Add(0, 0, 0, wxTOP, FromDIP(4)); bSizer_right->Add(bSizer_control, 1, wxEXPAND | wxALL, 0); @@ -2228,8 +2244,10 @@ void StatusBasePanel::expand_filament_loading(wxMouseEvent& e) m_filament_step->Show(tag_show); Layout(); Fit(); - wxGetApp().mainframe->m_monitor->get_status_panel()->Layout(); - wxGetApp().mainframe->m_monitor->Layout(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) { + monitor->get_status_panel()->Layout(); + monitor->Layout(); + } } void StatusBasePanel::show_ams_group(bool show) @@ -2240,7 +2258,8 @@ void StatusBasePanel::show_ams_group(bool show) m_ams_control->Fit(); Layout(); Fit(); - wxGetApp().mainframe->m_monitor->Layout(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) + monitor->Layout(); } // On rack printers, don't clobber the rack view when the user has the switch on "Hotends". @@ -2253,7 +2272,8 @@ void StatusBasePanel::show_ams_group(bool show) m_ams_control->Fit(); Layout(); Fit(); - wxGetApp().mainframe->m_monitor->Layout(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) + monitor->Layout(); } } @@ -2277,8 +2297,10 @@ void StatusBasePanel::show_filament_load_group(bool show) Layout(); Fit(); - wxGetApp().mainframe->m_monitor->get_status_panel()->Layout(); - wxGetApp().mainframe->m_monitor->Layout(); + if (MonitorPanel* monitor = MonitorPanel::if_built()) { + monitor->get_status_panel()->Layout(); + monitor->Layout(); + } } } @@ -2403,6 +2425,12 @@ void StatusPanel::update_camera_state(MachineObject* obj) StatusPanel::StatusPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, const wxSize &size, long style, const wxString &name) : StatusBasePanel(parent, id, pos, size, style) +{ + // Wires the controls the base class builds in steps, so it is the last step. + add_build_step([this] { wire_controls(); }); +} + +void StatusPanel::wire_controls() { init_scaled_buttons(); m_buttons.push_back(m_bpButton_z_10); @@ -2514,47 +2542,50 @@ StatusPanel::StatusPanel(wxWindow *parent, wxWindowID id, const wxPoint &pos, co StatusPanel::~StatusPanel() { - // Disconnect Events - m_project_task_panel->get_bitmap_thumbnail()->Disconnect(wxEVT_LEFT_DOWN, wxMouseEventHandler(StatusPanel::refresh_thumbnail_webrequest), NULL, this); - m_project_task_panel->get_partskip_button()->Disconnect(wxEVT_LEFT_DOWN, wxCommandEventHandler(StatusPanel::on_subtask_partskip), NULL, this); - m_project_task_panel->get_pause_resume_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_pause_resume), NULL, this); - m_project_task_panel->get_abort_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_abort), NULL, this); - m_project_task_panel->get_market_scoring_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_scoring), NULL, this); - m_project_task_panel->get_market_retry_buttom()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_retry), NULL, this); - m_project_task_panel->get_clean_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_print_error_clean), NULL, this); + // The controls only exist once the last build step has run. + if (built()) { + // Disconnect Events + m_project_task_panel->get_bitmap_thumbnail()->Disconnect(wxEVT_LEFT_DOWN, wxMouseEventHandler(StatusPanel::refresh_thumbnail_webrequest), NULL, this); + m_project_task_panel->get_partskip_button()->Disconnect(wxEVT_LEFT_DOWN, wxCommandEventHandler(StatusPanel::on_subtask_partskip), NULL, this); + m_project_task_panel->get_pause_resume_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_pause_resume), NULL, this); + m_project_task_panel->get_abort_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_subtask_abort), NULL, this); + m_project_task_panel->get_market_scoring_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_scoring), NULL, this); + m_project_task_panel->get_market_retry_buttom()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_market_retry), NULL, this); + m_project_task_panel->get_clean_button()->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_print_error_clean), NULL, this); - m_setting_button->Disconnect(wxEVT_LEFT_DOWN, wxMouseEventHandler(StatusPanel::on_camera_enter), NULL, this); - m_setting_button->Disconnect(wxEVT_LEFT_DCLICK, wxMouseEventHandler(StatusPanel::on_camera_enter), NULL, this); - m_tempCtrl_bed->Disconnect(wxEVT_KILL_FOCUS, wxFocusEventHandler(StatusPanel::on_bed_temp_kill_focus), NULL, this); - m_tempCtrl_bed->Disconnect(wxEVT_SET_FOCUS, wxFocusEventHandler(StatusPanel::on_bed_temp_set_focus), NULL, this); - m_tempCtrl_nozzle->Disconnect(wxEVT_KILL_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_kill_focus), NULL, this); - m_tempCtrl_nozzle->Disconnect(wxEVT_SET_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_set_focus), NULL, this); + m_setting_button->Disconnect(wxEVT_LEFT_DOWN, wxMouseEventHandler(StatusPanel::on_camera_enter), NULL, this); + m_setting_button->Disconnect(wxEVT_LEFT_DCLICK, wxMouseEventHandler(StatusPanel::on_camera_enter), NULL, this); + m_tempCtrl_bed->Disconnect(wxEVT_KILL_FOCUS, wxFocusEventHandler(StatusPanel::on_bed_temp_kill_focus), NULL, this); + m_tempCtrl_bed->Disconnect(wxEVT_SET_FOCUS, wxFocusEventHandler(StatusPanel::on_bed_temp_set_focus), NULL, this); + m_tempCtrl_nozzle->Disconnect(wxEVT_KILL_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_kill_focus), NULL, this); + m_tempCtrl_nozzle->Disconnect(wxEVT_SET_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_set_focus), NULL, this); - m_tempCtrl_nozzle_deputy->Disconnect(wxEVT_KILL_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_kill_focus), NULL, this); - m_tempCtrl_nozzle_deputy->Disconnect(wxEVT_SET_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_set_focus), NULL, this); + m_tempCtrl_nozzle_deputy->Disconnect(wxEVT_KILL_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_kill_focus), NULL, this); + m_tempCtrl_nozzle_deputy->Disconnect(wxEVT_SET_FOCUS, wxFocusEventHandler(StatusPanel::on_nozzle_temp_set_focus), NULL, this); - m_switch_lamp->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_lamp_switch), NULL, this); - /*m_switch_nozzle_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); - m_switch_printing_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); - m_switch_cham_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this);*/ + m_switch_lamp->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_lamp_switch), NULL, this); + /*m_switch_nozzle_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); + m_switch_printing_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); + m_switch_cham_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this);*/ - //m_switch_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); - //m_switch_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); - m_switch_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); + //m_switch_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); + //m_switch_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); + m_switch_fan->Disconnect(wxEVT_COMMAND_TOGGLEBUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_nozzle_fan_switch), NULL, this); - m_bpButton_xy->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_xy), NULL, this); - m_bpButton_z_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_up_10), NULL, this); - m_bpButton_z_1->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_up_1), NULL, this); - m_bpButton_z_down_1->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_down_1), NULL, this); - m_bpButton_z_down_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_down_10), NULL, this); - m_bpButton_e_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_e_up_10), NULL, this); - m_bpButton_e_down_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_e_down_10), NULL, this); - m_nozzle_btn_panel->Disconnect(wxCUSTOMEVT_SWITCH_POS, wxCommandEventHandler(StatusPanel::on_nozzle_selected), NULL, this); - m_switch_speed->Disconnect(wxEVT_LEFT_DOWN, wxCommandEventHandler(StatusPanel::on_switch_speed), NULL, this); - m_calibration_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_start_calibration), NULL, this); - m_options_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_show_print_options), NULL, this); - m_safety_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_show_safety_options), NULL, this); - m_parts_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_show_parts_options), NULL, this); + m_bpButton_xy->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_xy), NULL, this); + m_bpButton_z_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_up_10), NULL, this); + m_bpButton_z_1->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_up_1), NULL, this); + m_bpButton_z_down_1->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_down_1), NULL, this); + m_bpButton_z_down_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_z_down_10), NULL, this); + m_bpButton_e_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_e_up_10), NULL, this); + m_bpButton_e_down_10->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_axis_ctrl_e_down_10), NULL, this); + m_nozzle_btn_panel->Disconnect(wxCUSTOMEVT_SWITCH_POS, wxCommandEventHandler(StatusPanel::on_nozzle_selected), NULL, this); + m_switch_speed->Disconnect(wxEVT_LEFT_DOWN, wxCommandEventHandler(StatusPanel::on_switch_speed), NULL, this); + m_calibration_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_start_calibration), NULL, this); + m_options_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_show_print_options), NULL, this); + m_safety_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_show_safety_options), NULL, this); + m_parts_btn->Disconnect(wxEVT_COMMAND_BUTTON_CLICKED, wxCommandEventHandler(StatusPanel::on_show_parts_options), NULL, this); + } // remove warning dialogs if (abort_dlg != nullptr) @@ -5216,7 +5247,9 @@ void StatusPanel::set_default() m_filament_step->Hide(); error_info_reset(); #ifndef __WXGTK__ - SetFocus(); + // Also reached while the panel is built off screen. + if (IsShownOnScreen()) + SetFocus(); #endif } diff --git a/src/slic3r/GUI/StatusPanel.hpp b/src/slic3r/GUI/StatusPanel.hpp index 341bb9ab69..d79c3d3915 100644 --- a/src/slic3r/GUI/StatusPanel.hpp +++ b/src/slic3r/GUI/StatusPanel.hpp @@ -36,6 +36,7 @@ #include "HMS.hpp" #include "PartSkipDialog.hpp" #include "DeviceErrorDialog.hpp" +#include "StagedBuild.hpp" class StepIndicator; @@ -375,7 +376,7 @@ public: void paint(wxPaintEvent&); }; -class StatusBasePanel : public wxScrolledWindow +class StatusBasePanel : public wxScrolledWindow, public StagedBuild { protected: wxBitmap m_item_placeholder; @@ -443,7 +444,7 @@ protected: wxMediaCtrl3 * m_media_ctrl; - MediaPlayCtrl * m_media_play_ctrl; + MediaPlayCtrl * m_media_play_ctrl{nullptr}; Label * m_staticText_printing; wxStaticBitmap *m_bitmap_thumbnail; @@ -629,6 +630,7 @@ class StatusPanel : public StatusBasePanel { private: friend class MonitorPanel; + void wire_controls(); protected: std::shared_ptr m_slice_info_popup; @@ -679,7 +681,7 @@ protected: std::map m_print_connect_types; std::vector